arch: remove unicore32 port

The unicore32 port do not seem maintained for a long time now, there is no
upstream toolchain that can create unicore32 binaries and all the links to
prebuilt toolchains for unicore32 are dead. Even compilers that were
available are not supported by the kernel anymore.

Guenter Roeck says:

  I have stopped building unicore32 images since v4.19 since there is no
  available compiler that is still supported by the kernel. I am surprised
  that support for it has not been removed from the kernel.

Remove unicore32 port.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>

1 files changed, 0 insertions, 200 deletions

diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig
deleted file mode 100644
index 11ba1839d198..000000000000
--- a/arch/unicore32/Kconfig
+++ /dev/null
@@ -1,200 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-config UNICORE32
-	def_bool y
-	select ARCH_32BIT_OFF_T
-	select ARCH_HAS_DEVMEM_IS_ALLOWED
-	select ARCH_HAS_KEEPINITRD
-	select ARCH_MIGHT_HAVE_PC_PARPORT
-	select ARCH_MIGHT_HAVE_PC_SERIO
-	select HAVE_KERNEL_GZIP
-	select HAVE_KERNEL_BZIP2
-	select GENERIC_ATOMIC64
-	select HAVE_KERNEL_LZO
-	select HAVE_KERNEL_LZMA
-	select HAVE_PCI
-	select VIRT_TO_BUS
-	select ARCH_HAVE_CUSTOM_GPIO_H
-	select GENERIC_FIND_FIRST_BIT
-	select GENERIC_IRQ_PROBE
-	select GENERIC_IRQ_SHOW
-	select ARCH_WANT_FRAME_POINTERS
-	select GENERIC_IOMAP
-	select MODULES_USE_ELF_REL
-	select NEED_DMA_MAP_STATE
-	select MMU_GATHER_NO_RANGE if MMU
-	help
-	  UniCore-32 is 32-bit Instruction Set Architecture,
-	  including a series of low-power-consumption RISC chip
-	  designs licensed by PKUnity Ltd.
-	  Please see web page at <http://www.pkunity.com/>.
-
-config GENERIC_CSUM
-	def_bool y
-
-config NO_IOPORT_MAP
-	bool
-
-config STACKTRACE_SUPPORT
-	def_bool y
-
-config LOCKDEP_SUPPORT
-	def_bool y
-
-config ARCH_HAS_ILOG2_U32
-	bool
-
-config ARCH_HAS_ILOG2_U64
-	bool
-
-config GENERIC_HWEIGHT
-	def_bool y
-
-config GENERIC_CALIBRATE_DELAY
-	def_bool y
-
-config ARCH_MAY_HAVE_PC_FDC
-	bool
-
-config ZONE_DMA
-	def_bool y
-
-menu "System Type"
-
-config MMU
-	def_bool y
-
-config ARCH_FPGA
-	bool
-
-config ARCH_PUV3
-	def_bool y
-	select CPU_UCV2
-	select GENERIC_CLOCKEVENTS
-	select HAVE_LEGACY_CLK
-	select GPIOLIB
-
-# CONFIGs for ARCH_PUV3
-
-if ARCH_PUV3
-
-choice
-	prompt "Board Selection"
-	default PUV3_DB0913
-
-config PUV3_FPGA_DLX200
-	select ARCH_FPGA
-	bool "FPGA board"
-
-config PUV3_DB0913
-	bool "DEBUG board (0913)"
-
-config PUV3_NB0916
-	bool "NetBook board (0916)"
-	select PWM
-	select PWM_PUV3
-
-config PUV3_SMW0919
-	bool "Security Mini-Workstation board (0919)"
-
-endchoice
-
-config PUV3_PM
-	def_bool y if !ARCH_FPGA
-
-endif
-
-source "arch/unicore32/mm/Kconfig"
-
-comment "Floating point support"
-
-config UNICORE_FPU_F64
-	def_bool y if !ARCH_FPGA
-
-endmenu
-
-menu "Kernel Features"
-
-source "kernel/Kconfig.hz"
-
-config LEDS
-	def_bool y
-	depends on GPIOLIB
-
-config ALIGNMENT_TRAP
-	def_bool y
-	help
-	  Unicore processors can not fetch/store information which is not
-	  naturally aligned on the bus, i.e., a 4 byte fetch must start at an
-	  address divisible by 4. On 32-bit Unicore processors, these non-aligned
-	  fetch/store instructions will be emulated in software if you say
-	  here, which has a severe performance impact. This is necessary for
-	  correct operation of some network protocols. With an IP-only
-	  configuration it is safe to say N, otherwise say Y.
-
-endmenu
-
-menu "Boot options"
-
-config CMDLINE
-	string "Default kernel command string"
-	default ""
-
-config CMDLINE_FORCE
-	bool "Always use the default kernel command string"
-	depends on CMDLINE != ""
-	help
-	  Always use the default kernel command string, even if the boot
-	  loader passes other arguments to the kernel.
-	  This is useful if you cannot or don't want to change the
-	  command-line options your boot loader passes to the kernel.
-
-	  If unsure, say N.
-
-endmenu
-
-menu "Power management options"
-
-source "kernel/power/Kconfig"
-
-source "drivers/cpufreq/Kconfig"
-
-config ARCH_SUSPEND_POSSIBLE
-	def_bool y if !ARCH_FPGA
-
-config ARCH_HIBERNATION_POSSIBLE
-	def_bool y if !ARCH_FPGA
-
-endmenu
-
-if ARCH_PUV3
-
-config PUV3_GPIO
-	bool
-	depends on !ARCH_FPGA
-	select GPIO_SYSFS
-	default y
-
-if PUV3_NB0916
-
-menu "PKUnity NetBook-0916 Features"
-
-config I2C_BATTERY_BQ27200
-	tristate "I2C Battery BQ27200 Support"
-	select I2C_PUV3
-	select POWER_SUPPLY
-	select BATTERY_BQ27XXX
-
-config I2C_EEPROM_AT24
-	tristate "I2C EEPROMs AT24 support"
-	select I2C_PUV3
-	select EEPROM_AT24
-
-config LCD_BACKLIGHT
-	tristate "LCD Backlight support"
-	select BACKLIGHT_PWM
-
-endmenu
-
-endif
-
-endif