Merge tag 'oprofile-removal-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/linux

Pull oprofile and dcookies removal from Viresh Kumar:
 "Remove oprofile and dcookies support

  The 'oprofile' user-space tools don't use the kernel OPROFILE support
  any more, and haven't in a long time. User-space has been converted to
  the perf interfaces.

  The dcookies stuff is only used by the oprofile code. Now that
  oprofile's support is getting removed from the kernel, there is no
  need for dcookies as well.

  Remove kernel's old oprofile and dcookies support"

* tag 'oprofile-removal-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/linux:
  fs: Remove dcookies support
  drivers: Remove CONFIG_OPROFILE support
  arch: xtensa: Remove CONFIG_OPROFILE support
  arch: x86: Remove CONFIG_OPROFILE support
  arch: sparc: Remove CONFIG_OPROFILE support
  arch: sh: Remove CONFIG_OPROFILE support
  arch: s390: Remove CONFIG_OPROFILE support
  arch: powerpc: Remove oprofile
  arch: powerpc: Stop building and using oprofile
  arch: parisc: Remove CONFIG_OPROFILE support
  arch: mips: Remove CONFIG_OPROFILE support
  arch: microblaze: Remove CONFIG_OPROFILE support
  arch: ia64: Remove rest of perfmon support
  arch: ia64: Remove CONFIG_OPROFILE support
  arch: hexagon: Don't select HAVE_OPROFILE
  arch: arc: Remove CONFIG_OPROFILE support
  arch: arm: Remove CONFIG_OPROFILE support
  arch: alpha: Remove CONFIG_OPROFILE support

40 files changed, 1 insertions, 4984 deletions

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index d26a89cd8908..9141f03060ce 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -226,7 +226,6 @@ config PPC
 	select HAVE_MOD_ARCH_SPECIFIC
 	select HAVE_NMI				if PERF_EVENTS || (PPC64 && PPC_BOOK3S)
 	select HAVE_HARDLOCKUP_DETECTOR_ARCH	if (PPC64 && PPC_BOOK3S)
-	select HAVE_OPROFILE
 	select HAVE_OPTPROBES			if PPC64
 	select HAVE_PERF_EVENTS
 	select HAVE_PERF_EVENTS_NMI		if PPC64
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 08cf0eade56a..b959fdaec713 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -276,8 +276,6 @@ head-$(CONFIG_PPC_OF_BOOT_TRAMPOLINE)  += arch/powerpc/kernel/prom_init.o
 # See arch/powerpc/Kbuild for content of core part of the kernel
 core-y += arch/powerpc/
 
-drivers-$(CONFIG_OPROFILE)	+= arch/powerpc/oprofile/
-
 # Default to zImage, override when needed
 all: zImage
 
diff --git a/arch/powerpc/configs/44x/akebono_defconfig b/arch/powerpc/configs/44x/akebono_defconfig
index 3894ba8f8ffc..72b8f93a9bdd 100644
--- a/arch/powerpc/configs/44x/akebono_defconfig
+++ b/arch/powerpc/configs/44x/akebono_defconfig
@@ -8,7 +8,6 @@ CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_SLUB_CPU_PARTIAL is not set
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
diff --git a/arch/powerpc/configs/44x/currituck_defconfig b/arch/powerpc/configs/44x/currituck_defconfig
index 34c86b3abecb..717827219921 100644
--- a/arch/powerpc/configs/44x/currituck_defconfig
+++ b/arch/powerpc/configs/44x/currituck_defconfig
@@ -6,7 +6,6 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
diff --git a/arch/powerpc/configs/44x/fsp2_defconfig b/arch/powerpc/configs/44x/fsp2_defconfig
index 30845ce0885a..8da316e61a08 100644
--- a/arch/powerpc/configs/44x/fsp2_defconfig
+++ b/arch/powerpc/configs/44x/fsp2_defconfig
@@ -17,7 +17,6 @@ CONFIG_KALLSYMS_ALL=y
 CONFIG_BPF_SYSCALL=y
 CONFIG_EMBEDDED=y
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
diff --git a/arch/powerpc/configs/44x/iss476-smp_defconfig b/arch/powerpc/configs/44x/iss476-smp_defconfig
index 2c3834eebca3..c11e777b2f3d 100644
--- a/arch/powerpc/configs/44x/iss476-smp_defconfig
+++ b/arch/powerpc/configs/44x/iss476-smp_defconfig
@@ -7,7 +7,6 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig
index 42fbc70cec33..cc2c0d51f493 100644
--- a/arch/powerpc/configs/cell_defconfig
+++ b/arch/powerpc/configs/cell_defconfig
@@ -14,7 +14,6 @@ CONFIG_CPUSETS=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig
index 1de0dbf6cbba..63d611cc160f 100644
--- a/arch/powerpc/configs/g5_defconfig
+++ b/arch/powerpc/configs/g5_defconfig
@@ -12,7 +12,6 @@ CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig
index 161351a18517..9424c1e67e1c 100644
--- a/arch/powerpc/configs/maple_defconfig
+++ b/arch/powerpc/configs/maple_defconfig
@@ -9,7 +9,6 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig
index 15ed8d0aa014..78606b7e42df 100644
--- a/arch/powerpc/configs/pasemi_defconfig
+++ b/arch/powerpc/configs/pasemi_defconfig
@@ -7,7 +7,6 @@ CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig
index 665a8d7cded0..7aefac5afab0 100644
--- a/arch/powerpc/configs/pmac32_defconfig
+++ b/arch/powerpc/configs/pmac32_defconfig
@@ -10,7 +10,6 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
diff --git a/arch/powerpc/configs/powernv_defconfig b/arch/powerpc/configs/powernv_defconfig
index 60a30fffeda0..2c87e856d839 100644
--- a/arch/powerpc/configs/powernv_defconfig
+++ b/arch/powerpc/configs/powernv_defconfig
@@ -30,7 +30,6 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_BPF_SYSCALL=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
 CONFIG_KPROBES=y
 CONFIG_JUMP_LABEL=y
 CONFIG_MODULES=y
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index 48759656a067..4f05a6652478 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -62,7 +62,6 @@ CONFIG_VIRTUALIZATION=y
 CONFIG_KVM_BOOK3S_64=m
 CONFIG_KVM_BOOK3S_64_HV=m
 CONFIG_VHOST_NET=m
-CONFIG_OPROFILE=m
 CONFIG_KPROBES=y
 CONFIG_JUMP_LABEL=y
 CONFIG_MODULES=y
diff --git a/arch/powerpc/configs/ppc64e_defconfig b/arch/powerpc/configs/ppc64e_defconfig
index 33a01a9e86be..5cf49a515f8e 100644
--- a/arch/powerpc/configs/ppc64e_defconfig
+++ b/arch/powerpc/configs/ppc64e_defconfig
@@ -14,7 +14,6 @@ CONFIG_CPUSETS=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
index ef09f3cce1fa..10c055eaebf0 100644
--- a/arch/powerpc/configs/ppc6xx_defconfig
+++ b/arch/powerpc/configs/ppc6xx_defconfig
@@ -19,7 +19,6 @@ CONFIG_USER_NS=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig
index 142f1321fa58..f300dcb937cc 100644
--- a/arch/powerpc/configs/ps3_defconfig
+++ b/arch/powerpc/configs/ps3_defconfig
@@ -13,7 +13,6 @@ CONFIG_EMBEDDED=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_PPC_POWERNV is not set
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index d5dece981c02..777221775c83 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -29,7 +29,6 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_BPF_SYSCALL=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
 CONFIG_KPROBES=y
 CONFIG_JUMP_LABEL=y
 CONFIG_MODULES=y
diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index 5f21a5bab467..e85c849214a2 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -17,16 +17,6 @@ struct cpu_spec;
 typedef	void (*cpu_setup_t)(unsigned long offset, struct cpu_spec* spec);
 typedef	void (*cpu_restore_t)(void);
 
-enum powerpc_oprofile_type {
-	PPC_OPROFILE_INVALID = 0,
-	PPC_OPROFILE_RS64 = 1,
-	PPC_OPROFILE_POWER4 = 2,
-	PPC_OPROFILE_G4 = 3,
-	PPC_OPROFILE_FSL_EMB = 4,
-	PPC_OPROFILE_CELL = 5,
-	PPC_OPROFILE_PA6T = 6,
-};
-
 enum powerpc_pmc_type {
 	PPC_PMC_DEFAULT = 0,
 	PPC_PMC_IBM = 1,
@@ -83,16 +73,6 @@ struct cpu_spec {
 	/* Used by oprofile userspace to select the right counters */
 	char		*oprofile_cpu_type;
 
-	/* Processor specific oprofile operations */
-	enum powerpc_oprofile_type oprofile_type;
-
-	/* Bit locations inside the mmcra change */
-	unsigned long	oprofile_mmcra_sihv;
-	unsigned long	oprofile_mmcra_sipr;
-
-	/* Bits to clear during an oprofile exception */
-	unsigned long	oprofile_mmcra_clear;
-
 	/* Name of processor class, for the ELF AT_PLATFORM entry */
 	char		*platform;
 
diff --git a/arch/powerpc/include/asm/oprofile_impl.h b/arch/powerpc/include/asm/oprofile_impl.h
deleted file mode 100644
index 2a166c297f97..000000000000
--- a/arch/powerpc/include/asm/oprofile_impl.h
+++ /dev/null
@@ -1,135 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
- *
- * Based on alpha version.
- */
-
-#ifndef _ASM_POWERPC_OPROFILE_IMPL_H
-#define _ASM_POWERPC_OPROFILE_IMPL_H
-#ifdef __KERNEL__
-
-#define OP_MAX_COUNTER 8
-
-/* Per-counter configuration as set via oprofilefs.  */
-struct op_counter_config {
-	unsigned long enabled;
-	unsigned long event;
-	unsigned long count;
-	/* Classic doesn't support per-counter user/kernel selection */
-	unsigned long kernel;
-	unsigned long user;
-	unsigned long unit_mask;
-};
-
-/* System-wide configuration as set via oprofilefs.  */
-struct op_system_config {
-#ifdef CONFIG_PPC64
-	unsigned long mmcr0;
-	unsigned long mmcr1;
-	unsigned long mmcra;
-#ifdef CONFIG_OPROFILE_CELL
-	/* Register for oprofile user tool to check cell kernel profiling
-	 * support.
-	 */
-	unsigned long cell_support;
-#endif
-#endif
-	unsigned long enable_kernel;
-	unsigned long enable_user;
-};
-
-/* Per-arch configuration */
-struct op_powerpc_model {
-	int (*reg_setup) (struct op_counter_config *,
-			   struct op_system_config *,
-			   int num_counters);
-	int  (*cpu_setup) (struct op_counter_config *);
-	int  (*start) (struct op_counter_config *);
-	int  (*global_start) (struct op_counter_config *);
-	void (*stop) (void);
-	void (*global_stop) (void);
-	int (*sync_start)(void);
-	int (*sync_stop)(void);
-	void (*handle_interrupt) (struct pt_regs *,
-				  struct op_counter_config *);
-	int num_counters;
-};
-
-extern struct op_powerpc_model op_model_fsl_emb;
-extern struct op_powerpc_model op_model_power4;
-extern struct op_powerpc_model op_model_7450;
-extern struct op_powerpc_model op_model_cell;
-extern struct op_powerpc_model op_model_pa6t;
-
-
-/* All the classic PPC parts use these */
-static inline unsigned int classic_ctr_read(unsigned int i)
-{
-	switch(i) {
-	case 0:
-		return mfspr(SPRN_PMC1);
-	case 1:
-		return mfspr(SPRN_PMC2);
-	case 2:
-		return mfspr(SPRN_PMC3);
-	case 3:
-		return mfspr(SPRN_PMC4);
-	case 4:
-		return mfspr(SPRN_PMC5);
-	case 5:
-		return mfspr(SPRN_PMC6);
-
-/* No PPC32 chip has more than 6 so far */
-#ifdef CONFIG_PPC64
-	case 6:
-		return mfspr(SPRN_PMC7);
-	case 7:
-		return mfspr(SPRN_PMC8);
-#endif
-	default:
-		return 0;
-	}
-}
-
-static inline void classic_ctr_write(unsigned int i, unsigned int val)
-{
-	switch(i) {
-	case 0:
-		mtspr(SPRN_PMC1, val);
-		break;
-	case 1:
-		mtspr(SPRN_PMC2, val);
-		break;
-	case 2:
-		mtspr(SPRN_PMC3, val);
-		break;
-	case 3:
-		mtspr(SPRN_PMC4, val);
-		break;
-	case 4:
-		mtspr(SPRN_PMC5, val);
-		break;
-	case 5:
-		mtspr(SPRN_PMC6, val);
-		break;
-
-/* No PPC32 chip has more than 6, yet */
-#ifdef CONFIG_PPC64
-	case 6:
-		mtspr(SPRN_PMC7, val);
-		break;
-	case 7:
-		mtspr(SPRN_PMC8, val);
-		break;
-#endif
-	default:
-		break;
-	}
-}
-
-
-extern void op_powerpc_backtrace(struct pt_regs * const regs, unsigned int depth);
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_OPROFILE_IMPL_H */
diff --git a/arch/powerpc/include/asm/spu.h b/arch/powerpc/include/asm/spu.h
index 9666491bcb8a..8a2d11ba0dae 100644
--- a/arch/powerpc/include/asm/spu.h
+++ b/arch/powerpc/include/asm/spu.h
@@ -201,20 +201,6 @@ int spu_64k_pages_available(void);
 struct mm_struct;
 extern void spu_flush_all_slbs(struct mm_struct *mm);
 
-/* This interface allows a profiler (e.g., OProfile) to store a ref
- * to spu context information that it creates.	This caching technique
- * avoids the need to recreate this information after a save/restore operation.
- *
- * Assumes the caller has already incremented the ref count to
- * profile_info; then spu_context_destroy must call kref_put
- * on prof_info_kref.
- */
-void spu_set_profile_private_kref(struct spu_context *ctx,
-				  struct kref *prof_info_kref,
-				  void ( * prof_info_release) (struct kref *kref));
-
-void *spu_get_profile_private_kref(struct spu_context *ctx);
-
 /* system callbacks from the SPU */
 struct spu_syscall_block {
 	u64 nr_ret;
@@ -266,25 +252,6 @@ void spu_remove_dev_attr(struct device_attribute *attr);
 int spu_add_dev_attr_group(struct attribute_group *attrs);
 void spu_remove_dev_attr_group(struct attribute_group *attrs);
 
-/*
- * Notifier blocks:
- *
- * oprofile can get notified when a context switch is performed
- * on an spe. The notifer function that gets called is passed
- * a pointer to the SPU structure as well as the object-id that
- * identifies the binary running on that SPU now.
- *
- * For a context save, the object-id that is passed is zero,
- * identifying that the kernel will run from that moment on.
- *
- * For a context restore, the object-id is the value written
- * to object-id spufs file from user space and the notifer
- * function can assume that spu->ctx is valid.
- */
-struct notifier_block;
-int spu_switch_event_register(struct notifier_block * n);
-int spu_switch_event_unregister(struct notifier_block * n);
-
 extern void notify_spus_active(void);
 extern void do_notify_spus_active(void);
 
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 65f35ec052d4..ae0fdef0ac11 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -13,7 +13,6 @@
 #include <linux/export.h>
 #include <linux/jump_label.h>
 
-#include <asm/oprofile_impl.h>
 #include <asm/cputable.h>
 #include <asm/prom.h>		/* for PTRRELOC on ARCH=ppc */
 #include <asm/mce.h>
@@ -151,7 +150,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_setup		= __setup_cpu_ppc970,
 		.cpu_restore		= __restore_cpu_ppc970,
 		.oprofile_cpu_type	= "ppc64/970",
-		.oprofile_type		= PPC_OPROFILE_POWER4,
 		.platform		= "ppc970",
 	},
 	{	/* PPC970FX */
@@ -169,7 +167,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_setup		= __setup_cpu_ppc970,
 		.cpu_restore		= __restore_cpu_ppc970,
 		.oprofile_cpu_type	= "ppc64/970",
-		.oprofile_type		= PPC_OPROFILE_POWER4,
 		.platform		= "ppc970",
 	},
 	{	/* PPC970MP DD1.0 - no DEEPNAP, use regular 970 init */
@@ -187,7 +184,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_setup		= __setup_cpu_ppc970,
 		.cpu_restore		= __restore_cpu_ppc970,
 		.oprofile_cpu_type	= "ppc64/970MP",
-		.oprofile_type		= PPC_OPROFILE_POWER4,
 		.platform		= "ppc970",
 	},
 	{	/* PPC970MP */
@@ -205,7 +201,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_setup		= __setup_cpu_ppc970MP,
 		.cpu_restore		= __restore_cpu_ppc970,
 		.oprofile_cpu_type	= "ppc64/970MP",
-		.oprofile_type		= PPC_OPROFILE_POWER4,
 		.platform		= "ppc970",
 	},
 	{	/* PPC970GX */
@@ -222,7 +217,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.pmc_type		= PPC_PMC_IBM,
 		.cpu_setup		= __setup_cpu_ppc970,
 		.oprofile_cpu_type	= "ppc64/970",
-		.oprofile_type		= PPC_OPROFILE_POWER4,
 		.platform		= "ppc970",
 	},
 	{	/* Power5 GR */
@@ -237,12 +231,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.num_pmcs		= 6,
 		.pmc_type		= PPC_PMC_IBM,
 		.oprofile_cpu_type	= "ppc64/power5",
-		.oprofile_type		= PPC_OPROFILE_POWER4,
-		/* SIHV / SIPR bits are implemented on POWER4+ (GQ)
-		 * and above but only works on POWER5 and above
-		 */
-		.oprofile_mmcra_sihv	= MMCRA_SIHV,
-		.oprofile_mmcra_sipr	= MMCRA_SIPR,
 		.platform		= "power5",
 	},
 	{	/* Power5++ */
@@ -256,9 +244,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.dcache_bsize		= 128,
 		.num_pmcs		= 6,
 		.oprofile_cpu_type	= "ppc64/power5++",
-		.oprofile_type		= PPC_OPROFILE_POWER4,
-		.oprofile_mmcra_sihv	= MMCRA_SIHV,
-		.oprofile_mmcra_sipr	= MMCRA_SIPR,
 		.platform		= "power5+",
 	},
 	{	/* Power5 GS */
@@ -273,9 +258,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.num_pmcs		= 6,
 		.pmc_type		= PPC_PMC_IBM,
 		.oprofile_cpu_type	= "ppc64/power5+",
-		.oprofile_type		= PPC_OPROFILE_POWER4,
-		.oprofile_mmcra_sihv	= MMCRA_SIHV,
-		.oprofile_mmcra_sipr	= MMCRA_SIPR,
 		.platform		= "power5+",
 	},
 	{	/* POWER6 in P5+ mode; 2.04-compliant processor */
@@ -288,7 +270,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.oprofile_cpu_type	= "ppc64/ibm-compat-v1",
-		.oprofile_type		= PPC_OPROFILE_POWER4,
 		.platform		= "power5+",
 	},
 	{	/* Power6 */
@@ -304,11 +285,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.num_pmcs		= 6,
 		.pmc_type		= PPC_PMC_IBM,
 		.oprofile_cpu_type	= "ppc64/power6",
-		.oprofile_type		= PPC_OPROFILE_POWER4,
-		.oprofile_mmcra_sihv	= POWER6_MMCRA_SIHV,
-		.oprofile_mmcra_sipr	= POWER6_MMCRA_SIPR,
-		.oprofile_mmcra_clear	= POWER6_MMCRA_THRM |
-			POWER6_MMCRA_OTHER,
 		.platform		= "power6x",
 	},
 	{	/* 2.05-compliant processor, i.e. Power6 "architected" mode */
@@ -321,7 +297,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.oprofile_cpu_type	= "ppc64/ibm-compat-v1",
-		.oprofile_type		= PPC_OPROFILE_POWER4,
 		.platform		= "power6",
 	},
 	{	/* 2.06-compliant processor, i.e. Power7 "architected" mode */
@@ -334,7 +309,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.mmu_features		= MMU_FTRS_POWER7,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
-		.oprofile_type		= PPC_OPROFILE_POWER4,
 		.oprofile_cpu_type	= "ppc64/ibm-compat-v1",
 		.cpu_setup		= __setup_cpu_power7,
 		.cpu_restore		= __restore_cpu_power7,
@@ -351,7 +325,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.mmu_features		= MMU_FTRS_POWER8,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
-		.oprofile_type		= PPC_OPROFILE_INVALID,
 		.oprofile_cpu_type	= "ppc64/ibm-compat-v1",
 		.cpu_setup		= __setup_cpu_power8,
 		.cpu_restore		= __restore_cpu_power8,
@@ -368,7 +341,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.mmu_features		= MMU_FTRS_POWER9,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
-		.oprofile_type		= PPC_OPROFILE_INVALID,
 		.oprofile_cpu_type	= "ppc64/ibm-compat-v1",
 		.cpu_setup		= __setup_cpu_power9,
 		.cpu_restore		= __restore_cpu_power9,
@@ -384,7 +356,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.mmu_features		= MMU_FTRS_POWER10,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
-		.oprofile_type		= PPC_OPROFILE_INVALID,
 		.oprofile_cpu_type	= "ppc64/ibm-compat-v1",
 		.cpu_setup		= __setup_cpu_power10,
 		.cpu_restore		= __restore_cpu_power10,
@@ -403,7 +374,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.num_pmcs		= 6,
 		.pmc_type		= PPC_PMC_IBM,
 		.oprofile_cpu_type	= "ppc64/power7",
-		.oprofile_type		= PPC_OPROFILE_POWER4,
 		.cpu_setup		= __setup_cpu_power7,
 		.cpu_restore		= __restore_cpu_power7,
 		.machine_check_early	= __machine_check_early_realmode_p7,
@@ -422,7 +392,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.num_pmcs		= 6,
 		.pmc_type		= PPC_PMC_IBM,
 		.oprofile_cpu_type	= "ppc64/power7",
-		.oprofile_type		= PPC_OPROFILE_POWER4,
 		.cpu_setup		= __setup_cpu_power7,
 		.cpu_restore		= __restore_cpu_power7,
 		.machine_check_early	= __machine_check_early_realmode_p7,
@@ -441,7 +410,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.num_pmcs		= 6,
 		.pmc_type		= PPC_PMC_IBM,
 		.oprofile_cpu_type	= "ppc64/power8",
-		.oprofile_type		= PPC_OPROFILE_INVALID,
 		.cpu_setup		= __setup_cpu_power8,
 		.cpu_restore		= __restore_cpu_power8,
 		.machine_check_early	= __machine_check_early_realmode_p8,
@@ -460,7 +428,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.num_pmcs		= 6,
 		.pmc_type		= PPC_PMC_IBM,
 		.oprofile_cpu_type	= "ppc64/power8",
-		.oprofile_type		= PPC_OPROFILE_INVALID,
 		.cpu_setup		= __setup_cpu_power8,
 		.cpu_restore		= __restore_cpu_power8,
 		.machine_check_early	= __machine_check_early_realmode_p8,
@@ -479,7 +446,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.num_pmcs		= 6,
 		.pmc_type		= PPC_PMC_IBM,
 		.oprofile_cpu_type	= "ppc64/power8",
-		.oprofile_type		= PPC_OPROFILE_INVALID,
 		.cpu_setup		= __setup_cpu_power8,
 		.cpu_restore		= __restore_cpu_power8,
 		.machine_check_early	= __machine_check_early_realmode_p8,
@@ -498,7 +464,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.num_pmcs		= 6,
 		.pmc_type		= PPC_PMC_IBM,
 		.oprofile_cpu_type	= "ppc64/power9",
-		.oprofile_type		= PPC_OPROFILE_INVALID,
 		.cpu_setup		= __setup_cpu_power9,
 		.cpu_restore		= __restore_cpu_power9,
 		.machine_check_early	= __machine_check_early_realmode_p9,
@@ -517,7 +482,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.num_pmcs		= 6,
 		.pmc_type		= PPC_PMC_IBM,
 		.oprofile_cpu_type	= "ppc64/power9",
-		.oprofile_type		= PPC_OPROFILE_INVALID,
 		.cpu_setup		= __setup_cpu_power9,
 		.cpu_restore		= __restore_cpu_power9,
 		.machine_check_early	= __machine_check_early_realmode_p9,
@@ -536,7 +500,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.num_pmcs		= 6,
 		.pmc_type		= PPC_PMC_IBM,
 		.oprofile_cpu_type	= "ppc64/power9",
-		.oprofile_type		= PPC_OPROFILE_INVALID,
 		.cpu_setup		= __setup_cpu_power9,
 		.cpu_restore		= __restore_cpu_power9,
 		.machine_check_early	= __machine_check_early_realmode_p9,
@@ -555,7 +518,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.num_pmcs		= 6,
 		.pmc_type		= PPC_PMC_IBM,
 		.oprofile_cpu_type	= "ppc64/power10",
-		.oprofile_type		= PPC_OPROFILE_INVALID,
 		.cpu_setup		= __setup_cpu_power10,
 		.cpu_restore		= __restore_cpu_power10,
 		.machine_check_early	= __machine_check_early_realmode_p10,
@@ -575,7 +537,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.num_pmcs		= 4,
 		.pmc_type		= PPC_PMC_IBM,
 		.oprofile_cpu_type	= "ppc64/cell-be",
-		.oprofile_type		= PPC_OPROFILE_CELL,
 		.platform		= "ppc-cell-be",
 	},
 	{	/* PA Semi PA6T */
@@ -592,7 +553,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_setup		= __setup_cpu_pa6t,
 		.cpu_restore		= __restore_cpu_pa6t,
 		.oprofile_cpu_type	= "ppc64/pa6t",
-		.oprofile_type		= PPC_OPROFILE_PA6T,
 		.platform		= "pa6t",
 	},
 	{	/* default match */
@@ -757,7 +717,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc750",
 		.oprofile_cpu_type      = "ppc/750",
-		.oprofile_type		= PPC_OPROFILE_G4,
 	},
 	{	/* 745/755 */
 		.pvr_mask		= 0xfffff000,
@@ -789,7 +748,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc750",
 		.oprofile_cpu_type      = "ppc/750",
-		.oprofile_type		= PPC_OPROFILE_G4,
 	},
 	{	/* 750FX rev 2.0 must disable HID0[DPM] */
 		.pvr_mask		= 0xffffffff,
@@ -806,7 +764,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc750",
 		.oprofile_cpu_type      = "ppc/750",
-		.oprofile_type		= PPC_OPROFILE_G4,
 	},
 	{	/* 750FX (All revs except 2.0) */
 		.pvr_mask		= 0xffff0000,
@@ -823,7 +780,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc750",
 		.oprofile_cpu_type      = "ppc/750",
-		.oprofile_type		= PPC_OPROFILE_G4,
 	},
 	{	/* 750GX */
 		.pvr_mask		= 0xffff0000,
@@ -840,7 +796,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc750",
 		.oprofile_cpu_type      = "ppc/750",
-		.oprofile_type		= PPC_OPROFILE_G4,
 	},
 	{	/* 740/750 (L2CR bit need fixup for 740) */
 		.pvr_mask		= 0xffff0000,
@@ -919,7 +874,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.pmc_type		= PPC_PMC_G4,
 		.cpu_setup		= __setup_cpu_745x,
 		.oprofile_cpu_type      = "ppc/7450",
-		.oprofile_type		= PPC_OPROFILE_G4,
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc7450",
 	},
@@ -937,7 +891,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.pmc_type		= PPC_PMC_G4,
 		.cpu_setup		= __setup_cpu_745x,
 		.oprofile_cpu_type      = "ppc/7450",
-		.oprofile_type		= PPC_OPROFILE_G4,
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc7450",
 	},
@@ -955,7 +908,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.pmc_type		= PPC_PMC_G4,
 		.cpu_setup		= __setup_cpu_745x,
 		.oprofile_cpu_type      = "ppc/7450",
-		.oprofile_type		= PPC_OPROFILE_G4,
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc7450",
 	},
@@ -973,7 +925,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.pmc_type		= PPC_PMC_G4,
 		.cpu_setup		= __setup_cpu_745x,
 		.oprofile_cpu_type      = "ppc/7450",
-		.oprofile_type		= PPC_OPROFILE_G4,
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc7450",
 	},
@@ -991,7 +942,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.pmc_type		= PPC_PMC_G4,
 		.cpu_setup		= __setup_cpu_745x,
 		.oprofile_cpu_type      = "ppc/7450",
-		.oprofile_type		= PPC_OPROFILE_G4,
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc7450",
 	},
@@ -1009,7 +959,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.pmc_type		= PPC_PMC_G4,
 		.cpu_setup		= __setup_cpu_745x,
 		.oprofile_cpu_type      = "ppc/7450",
-		.oprofile_type		= PPC_OPROFILE_G4,
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc7450",
 	},
@@ -1027,7 +976,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.pmc_type		= PPC_PMC_G4,
 		.cpu_setup		= __setup_cpu_745x,
 		.oprofile_cpu_type      = "ppc/7450",
-		.oprofile_type		= PPC_OPROFILE_G4,
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc7450",
 	},
@@ -1045,7 +993,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.pmc_type		= PPC_PMC_G4,
 		.cpu_setup		= __setup_cpu_745x,
 		.oprofile_cpu_type      = "ppc/7450",
-		.oprofile_type		= PPC_OPROFILE_G4,
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc7450",
 	},
@@ -1062,7 +1009,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.pmc_type		= PPC_PMC_G4,
 		.cpu_setup		= __setup_cpu_745x,
 		.oprofile_cpu_type      = "ppc/7450",
-		.oprofile_type		= PPC_OPROFILE_G4,
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc7450",
 	},
@@ -1080,7 +1026,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.pmc_type		= PPC_PMC_G4,
 		.cpu_setup		= __setup_cpu_745x,
 		.oprofile_cpu_type      = "ppc/7450",
-		.oprofile_type		= PPC_OPROFILE_G4,
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc7450",
 	},
@@ -1098,7 +1043,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.pmc_type		= PPC_PMC_G4,
 		.cpu_setup		= __setup_cpu_745x,
 		.oprofile_cpu_type      = "ppc/7450",
-		.oprofile_type		= PPC_OPROFILE_G4,
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc7450",
 	},
@@ -1211,7 +1155,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_83xx,
 		.num_pmcs		= 4,
 		.oprofile_cpu_type	= "ppc/e300",
-		.oprofile_type		= PPC_OPROFILE_FSL_EMB,
 		.platform		= "ppc603",
 	},
 	{	/* e300c4 (e300c1, plus one IU) */
@@ -1228,7 +1171,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_83xx,
 		.num_pmcs		= 4,
 		.oprofile_cpu_type	= "ppc/e300",
-		.oprofile_type		= PPC_OPROFILE_FSL_EMB,
 		.platform		= "ppc603",
 	},
 #endif
@@ -1925,7 +1867,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
 		.oprofile_cpu_type	= "ppc/e500",
-		.oprofile_type		= PPC_OPROFILE_FSL_EMB,
 		.cpu_setup		= __setup_cpu_e500v1,
 		.machine_check		= machine_check_e500,
 		.platform		= "ppc8540",
@@ -1945,7 +1886,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.dcache_bsize		= 32,
 		.num_pmcs		= 4,
 		.oprofile_cpu_type	= "ppc/e500",
-		.oprofile_type		= PPC_OPROFILE_FSL_EMB,
 		.cpu_setup		= __setup_cpu_e500v2,
 		.machine_check		= machine_check_e500,
 		.platform		= "ppc8548",
@@ -1965,7 +1905,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.dcache_bsize		= 64,
 		.num_pmcs		= 4,
 		.oprofile_cpu_type	= "ppc/e500mc",
-		.oprofile_type		= PPC_OPROFILE_FSL_EMB,
 		.cpu_setup		= __setup_cpu_e500mc,
 		.machine_check		= machine_check_e500mc,
 		.platform		= "ppce500mc",
@@ -1987,7 +1926,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.dcache_bsize		= 64,
 		.num_pmcs		= 4,
 		.oprofile_cpu_type	= "ppc/e500mc",
-		.oprofile_type		= PPC_OPROFILE_FSL_EMB,
 		.cpu_setup		= __setup_cpu_e5500,
 #ifndef CONFIG_PPC32
 		.cpu_restore		= __restore_cpu_e5500,
@@ -2010,7 +1948,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.dcache_bsize		= 64,
 		.num_pmcs		= 6,
 		.oprofile_cpu_type	= "ppc/e6500",
-		.oprofile_type		= PPC_OPROFILE_FSL_EMB,
 		.cpu_setup		= __setup_cpu_e6500,
 #ifndef CONFIG_PPC32
 		.cpu_restore		= __restore_cpu_e6500,
@@ -2076,10 +2013,6 @@ static struct cpu_spec * __init setup_cpu_spec(unsigned long offset,
 	if (old.num_pmcs && !s->num_pmcs) {
 		t->num_pmcs = old.num_pmcs;
 		t->pmc_type = old.pmc_type;
-		t->oprofile_type = old.oprofile_type;
-		t->oprofile_mmcra_sihv = old.oprofile_mmcra_sihv;
-		t->oprofile_mmcra_sipr = old.oprofile_mmcra_sipr;
-		t->oprofile_mmcra_clear = old.oprofile_mmcra_clear;
 
 		/*
 		 * If we have passed through this logic once before and
diff --git a/arch/powerpc/kernel/dt_cpu_ftrs.c b/arch/powerpc/kernel/dt_cpu_ftrs.c
index b5478b72c08c..358aee7c2d79 100644
--- a/arch/powerpc/kernel/dt_cpu_ftrs.c
+++ b/arch/powerpc/kernel/dt_cpu_ftrs.c
@@ -19,7 +19,6 @@
 #include <asm/dt_cpu_ftrs.h>
 #include <asm/mce.h>
 #include <asm/mmu.h>
-#include <asm/oprofile_impl.h>
 #include <asm/prom.h>
 #include <asm/setup.h>
 
@@ -103,7 +102,6 @@ static struct cpu_spec __initdata base_cpu_spec = {
 	.num_pmcs		= 0,
 	.pmc_type		= PPC_PMC_DEFAULT,
 	.oprofile_cpu_type	= NULL,
-	.oprofile_type		= PPC_OPROFILE_INVALID,
 	.cpu_setup		= NULL,
 	.cpu_restore		= __restore_cpu_cpufeatures,
 	.machine_check_early	= NULL,
diff --git a/arch/powerpc/oprofile/Makefile b/arch/powerpc/oprofile/Makefile
deleted file mode 100644
index bb2d94c8cbe6..000000000000
--- a/arch/powerpc/oprofile/Makefile
+++ /dev/null
@@ -1,19 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-ccflags-$(CONFIG_PPC64)	:= $(NO_MINIMAL_TOC)
-
-obj-$(CONFIG_OPROFILE) += oprofile.o
-
-DRIVER_OBJS := $(addprefix ../../../drivers/oprofile/, \
-		oprof.o cpu_buffer.o buffer_sync.o \
-		event_buffer.o oprofile_files.o \
-		oprofilefs.o oprofile_stats.o \
-		timer_int.o )
-
-oprofile-y := $(DRIVER_OBJS) common.o backtrace.o
-oprofile-$(CONFIG_OPROFILE_CELL) += op_model_cell.o \
-		cell/spu_profiler.o cell/vma_map.o \
-		cell/spu_task_sync.o
-oprofile-$(CONFIG_PPC_BOOK3S_64) += op_model_power4.o op_model_pa6t.o
-oprofile-$(CONFIG_FSL_EMB_PERFMON) += op_model_fsl_emb.o
-oprofile-$(CONFIG_PPC_BOOK3S_32) += op_model_7450.o
diff --git a/arch/powerpc/oprofile/backtrace.c b/arch/powerpc/oprofile/backtrace.c
deleted file mode 100644
index 9db7ada79d10..000000000000
--- a/arch/powerpc/oprofile/backtrace.c
+++ /dev/null
@@ -1,120 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/**
- * Copyright (C) 2005 Brian Rogan <bcr6@cornell.edu>, IBM
- *
-**/
-
-#include <linux/time.h>
-#include <linux/oprofile.h>
-#include <linux/sched.h>
-#include <asm/processor.h>
-#include <linux/uaccess.h>
-#include <linux/compat.h>
-#include <asm/oprofile_impl.h>
-
-#define STACK_SP(STACK)		*(STACK)
-
-#define STACK_LR64(STACK)	*((unsigned long *)(STACK) + 2)
-#define STACK_LR32(STACK)	*((unsigned int *)(STACK) + 1)
-
-#ifdef CONFIG_PPC64
-#define STACK_LR(STACK)		STACK_LR64(STACK)
-#else
-#define STACK_LR(STACK)		STACK_LR32(STACK)
-#endif
-
-static unsigned int user_getsp32(unsigned int sp, int is_first)
-{
-	unsigned int stack_frame[2];
-	void __user *p = compat_ptr(sp);
-
-	/*
-	 * The most likely reason for this is that we returned -EFAULT,
-	 * which means that we've done all that we can do from
-	 * interrupt context.
-	 */
-	if (copy_from_user_nofault(stack_frame, (void __user *)p,
-			sizeof(stack_frame)))
-		return 0;
-
-	if (!is_first)
-		oprofile_add_trace(STACK_LR32(stack_frame));
-
-	/*
-	 * We do not enforce increasing stack addresses here because
-	 * we may transition to a different stack, eg a signal handler.
-	 */
-	return STACK_SP(stack_frame);
-}
-
-#ifdef CONFIG_PPC64
-static unsigned long user_getsp64(unsigned long sp, int is_first)
-{
-	unsigned long stack_frame[3];
-
-	if (copy_from_user_nofault(stack_frame, (void __user *)sp,
-			sizeof(stack_frame)))
-		return 0;
-
-	if (!is_first)
-		oprofile_add_trace(STACK_LR64(stack_frame));
-
-	return STACK_SP(stack_frame);
-}
-#endif
-
-static unsigned long kernel_getsp(unsigned long sp, int is_first)
-{
-	unsigned long *stack_frame = (unsigned long *)sp;
-
-	if (!validate_sp(sp, current, STACK_FRAME_OVERHEAD))
-		return 0;
-
-	if (!is_first)
-		oprofile_add_trace(STACK_LR(stack_frame));
-
-	/*
-	 * We do not enforce increasing stack addresses here because
-	 * we might be transitioning from an interrupt stack to a kernel
-	 * stack. validate_sp() is designed to understand this, so just
-	 * use it.
-	 */
-	return STACK_SP(stack_frame);
-}
-
-void op_powerpc_backtrace(struct pt_regs * const regs, unsigned int depth)
-{
-	unsigned long sp = regs->gpr[1];
-	int first_frame = 1;
-
-	/* We ditch the top stackframe so need to loop through an extra time */
-	depth += 1;
-
-	if (!user_mode(regs)) {
-		while (depth--) {
-			sp = kernel_getsp(sp, first_frame);
-			if (!sp)
-				break;
-			first_frame = 0;
-		}
-	} else {
-#ifdef CONFIG_PPC64
-		if (!is_32bit_task()) {
-			while (depth--) {
-				sp = user_getsp64(sp, first_frame);
-				if (!sp)
-					break;
-				first_frame = 0;
-			}
-			return;
-		}
-#endif
-
-		while (depth--) {
-			sp = user_getsp32(sp, first_frame);
-			if (!sp)
-				break;
-			first_frame = 0;
-		}
-	}
-}
diff --git a/arch/powerpc/oprofile/cell/pr_util.h b/arch/powerpc/oprofile/cell/pr_util.h
deleted file mode 100644
index e198efa9113a..000000000000
--- a/arch/powerpc/oprofile/cell/pr_util.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
- /*
- * Cell Broadband Engine OProfile Support
- *
- * (C) Copyright IBM Corporation 2006
- *
- * Author: Maynard Johnson <maynardj@us.ibm.com>
- */
-
-#ifndef PR_UTIL_H
-#define PR_UTIL_H
-
-#include <linux/cpumask.h>
-#include <linux/oprofile.h>
-#include <asm/cell-pmu.h>
-#include <asm/cell-regs.h>
-#include <asm/spu.h>
-
-/* Defines used for sync_start */
-#define SKIP_GENERIC_SYNC 0
-#define SYNC_START_ERROR -1
-#define DO_GENERIC_SYNC 1
-#define SPUS_PER_NODE   8
-#define DEFAULT_TIMER_EXPIRE  (HZ / 10)
-
-extern struct delayed_work spu_work;
-extern int spu_prof_running;
-
-#define TRACE_ARRAY_SIZE 1024
-
-extern spinlock_t oprof_spu_smpl_arry_lck;
-
-struct spu_overlay_info {	/* map of sections within an SPU overlay */
-	unsigned int vma;	/* SPU virtual memory address from elf */
-	unsigned int size;	/* size of section from elf */
-	unsigned int offset;	/* offset of section into elf file */
-	unsigned int buf;
-};
-
-struct vma_to_fileoffset_map {	/* map of sections within an SPU program */
-	struct vma_to_fileoffset_map *next;	/* list pointer */
-	unsigned int vma;	/* SPU virtual memory address from elf */
-	unsigned int size;	/* size of section from elf */
-	unsigned int offset;	/* offset of section into elf file */
-	unsigned int guard_ptr;
-	unsigned int guard_val;
-        /*
-	 * The guard pointer is an entry in the _ovly_buf_table,
-	 * computed using ovly.buf as the index into the table.  Since
-	 * ovly.buf values begin at '1' to reference the first (or 0th)
-	 * entry in the _ovly_buf_table, the computation subtracts 1
-	 * from ovly.buf.
-	 * The guard value is stored in the _ovly_buf_table entry and
-	 * is an index (starting at 1) back to the _ovly_table entry
-	 * that is pointing at this _ovly_buf_table entry.  So, for
-	 * example, for an overlay scenario with one overlay segment
-	 * and two overlay sections:
-	 *      - Section 1 points to the first entry of the
-	 *        _ovly_buf_table, which contains a guard value
-	 *        of '1', referencing the first (index=0) entry of
-	 *        _ovly_table.
-	 *      - Section 2 points to the second entry of the
-	 *        _ovly_buf_table, which contains a guard value
-	 *        of '2', referencing the second (index=1) entry of
-	 *        _ovly_table.
-	 */
-
-};
-
-struct spu_buffer {
-	int last_guard_val;
-	int ctx_sw_seen;
-	unsigned long *buff;
-	unsigned int head, tail;
-};
-
-
-/* The three functions below are for maintaining and accessing
- * the vma-to-fileoffset map.
- */
-struct vma_to_fileoffset_map *create_vma_map(const struct spu *spu,
-					     unsigned long objectid);
-unsigned int vma_map_lookup(struct vma_to_fileoffset_map *map,
-			    unsigned int vma, const struct spu *aSpu,
-			    int *grd_val);
-void vma_map_free(struct vma_to_fileoffset_map *map);
-
-/*
- * Entry point for SPU profiling.
- * cycles_reset is the SPU_CYCLES count value specified by the user.
- */
-int start_spu_profiling_cycles(unsigned int cycles_reset);
-void start_spu_profiling_events(void);
-
-void stop_spu_profiling_cycles(void);
-void stop_spu_profiling_events(void);
-
-/* add the necessary profiling hooks */
-int spu_sync_start(void);
-
-/* remove the hooks */
-int spu_sync_stop(void);
-
-/* Record SPU program counter samples to the oprofile event buffer. */
-void spu_sync_buffer(int spu_num, unsigned int *samples,
-		     int num_samples);
-
-void set_spu_profiling_frequency(unsigned int freq_khz, unsigned int cycles_reset);
-
-#endif	  /* PR_UTIL_H */
diff --git a/arch/powerpc/oprofile/cell/spu_profiler.c b/arch/powerpc/oprofile/cell/spu_profiler.c
deleted file mode 100644
index cdf883445a9f..000000000000
--- a/arch/powerpc/oprofile/cell/spu_profiler.c
+++ /dev/null
@@ -1,248 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Cell Broadband Engine OProfile Support
- *
- * (C) Copyright IBM Corporation 2006
- *
- * Authors: Maynard Johnson <maynardj@us.ibm.com>
- *	    Carl Love <carll@us.ibm.com>
- */
-
-#include <linux/hrtimer.h>
-#include <linux/smp.h>
-#include <linux/slab.h>
-#include <asm/cell-pmu.h>
-#include <asm/time.h>
-#include "pr_util.h"
-
-#define SCALE_SHIFT 14
-
-static u32 *samples;
-
-/* spu_prof_running is a flag used to indicate if spu profiling is enabled
- * or not.  It is set by the routines start_spu_profiling_cycles() and
- * start_spu_profiling_events().  The flag is cleared by the routines
- * stop_spu_profiling_cycles() and stop_spu_profiling_events().  These
- * routines are called via global_start() and global_stop() which are called in
- * op_powerpc_start() and op_powerpc_stop().  These routines are called once
- * per system as a result of the user starting/stopping oprofile.  Hence, only
- * one CPU per user at a time will be changing  the value of spu_prof_running.
- * In general, OProfile does not protect against multiple users trying to run
- * OProfile at a time.
- */
-int spu_prof_running;
-static unsigned int profiling_interval;
-
-#define NUM_SPU_BITS_TRBUF 16
-#define SPUS_PER_TB_ENTRY   4
-
-#define SPU_PC_MASK	     0xFFFF
-
-DEFINE_SPINLOCK(oprof_spu_smpl_arry_lck);
-static unsigned long oprof_spu_smpl_arry_lck_flags;
-
-void set_spu_profiling_frequency(unsigned int freq_khz, unsigned int cycles_reset)
-{
-	unsigned long ns_per_cyc;
-
-	if (!freq_khz)
-		freq_khz = ppc_proc_freq/1000;
-
-	/* To calculate a timeout in nanoseconds, the basic
-	 * formula is ns = cycles_reset * (NSEC_PER_SEC / cpu frequency).
-	 * To avoid floating point math, we use the scale math
-	 * technique as described in linux/jiffies.h.  We use
-	 * a scale factor of SCALE_SHIFT, which provides 4 decimal places
-	 * of precision.  This is close enough for the purpose at hand.
-	 *
-	 * The value of the timeout should be small enough that the hw
-	 * trace buffer will not get more than about 1/3 full for the
-	 * maximum user specified (the LFSR value) hw sampling frequency.
-	 * This is to ensure the trace buffer will never fill even if the
-	 * kernel thread scheduling varies under a heavy system load.
-	 */
-
-	ns_per_cyc = (USEC_PER_SEC << SCALE_SHIFT)/freq_khz;
-	profiling_interval = (ns_per_cyc * cycles_reset) >> SCALE_SHIFT;
-
-}
-
-/*
- * Extract SPU PC from trace buffer entry
- */
-static void spu_pc_extract(int cpu, int entry)
-{
-	/* the trace buffer is 128 bits */
-	u64 trace_buffer[2];
-	u64 spu_mask;
-	int spu;
-
-	spu_mask = SPU_PC_MASK;
-
-	/* Each SPU PC is 16 bits; hence, four spus in each of
-	 * the two 64-bit buffer entries that make up the
-	 * 128-bit trace_buffer entry.	Process two 64-bit values
-	 * simultaneously.
-	 * trace[0] SPU PC contents are: 0 1 2 3
-	 * trace[1] SPU PC contents are: 4 5 6 7
-	 */
-
-	cbe_read_trace_buffer(cpu, trace_buffer);
-
-	for (spu = SPUS_PER_TB_ENTRY-1; spu >= 0; spu--) {
-		/* spu PC trace entry is upper 16 bits of the
-		 * 18 bit SPU program counter
-		 */
-		samples[spu * TRACE_ARRAY_SIZE + entry]
-			= (spu_mask & trace_buffer[0]) << 2;
-		samples[(spu + SPUS_PER_TB_ENTRY) * TRACE_ARRAY_SIZE + entry]
-			= (spu_mask & trace_buffer[1]) << 2;
-
-		trace_buffer[0] = trace_buffer[0] >> NUM_SPU_BITS_TRBUF;
-		trace_buffer[1] = trace_buffer[1] >> NUM_SPU_BITS_TRBUF;
-	}
-}
-
-static int cell_spu_pc_collection(int cpu)
-{
-	u32 trace_addr;
-	int entry;
-
-	/* process the collected SPU PC for the node */
-
-	entry = 0;
-
-	trace_addr = cbe_read_pm(cpu, trace_address);
-	while (!(trace_addr & CBE_PM_TRACE_BUF_EMPTY)) {
-		/* there is data in the trace buffer to process */
-		spu_pc_extract(cpu, entry);
-
-		entry++;
-
-		if (entry >= TRACE_ARRAY_SIZE)
-			/* spu_samples is full */
-			break;
-
-		trace_addr = cbe_read_pm(cpu, trace_address);
-	}
-
-	return entry;
-}
-
-
-static enum hrtimer_restart profile_spus(struct hrtimer *timer)
-{
-	ktime_t kt;
-	int cpu, node, k, num_samples, spu_num;
-
-	if (!spu_prof_running)
-		goto stop;
-
-	for_each_online_cpu(cpu) {
-		if (cbe_get_hw_thread_id(cpu))
-			continue;
-
-		node = cbe_cpu_to_node(cpu);
-
-		/* There should only be one kernel thread at a time processing
-		 * the samples.	 In the very unlikely case that the processing
-		 * is taking a very long time and multiple kernel threads are
-		 * started to process the samples.  Make sure only one kernel
-		 * thread is working on the samples array at a time.  The
-		 * sample array must be loaded and then processed for a given
-		 * cpu.	 The sample array is not per cpu.
-		 */
-		spin_lock_irqsave(&oprof_spu_smpl_arry_lck,
-				  oprof_spu_smpl_arry_lck_flags);
-		num_samples = cell_spu_pc_collection(cpu);
-
-		if (num_samples == 0) {
-			spin_unlock_irqrestore(&oprof_spu_smpl_arry_lck,
-					       oprof_spu_smpl_arry_lck_flags);
-			continue;
-		}
-
-		for (k = 0; k < SPUS_PER_NODE; k++) {
-			spu_num = k + (node * SPUS_PER_NODE);
-			spu_sync_buffer(spu_num,
-					samples + (k * TRACE_ARRAY_SIZE),
-					num_samples);
-		}
-
-		spin_unlock_irqrestore(&oprof_spu_smpl_arry_lck,
-				       oprof_spu_smpl_arry_lck_flags);
-
-	}
-	smp_wmb();	/* insure spu event buffer updates are written */
-			/* don't want events intermingled... */
-
-	kt = profiling_interval;
-	if (!spu_prof_running)
-		goto stop;
-	hrtimer_forward(timer, timer->base->get_time(), kt);
-	return HRTIMER_RESTART;
-
- stop:
-	printk(KERN_INFO "SPU_PROF: spu-prof timer ending\n");
-	return HRTIMER_NORESTART;
-}
-
-static struct hrtimer timer;
-/*
- * Entry point for SPU cycle profiling.
- * NOTE:  SPU profiling is done system-wide, not per-CPU.
- *
- * cycles_reset is the count value specified by the user when
- * setting up OProfile to count SPU_CYCLES.
- */
-int start_spu_profiling_cycles(unsigned int cycles_reset)
-{
-	ktime_t kt;
-
-	pr_debug("timer resolution: %lu\n", TICK_NSEC);
-	kt = profiling_interval;
-	hrtimer_init(&timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
-	hrtimer_set_expires(&timer, kt);
-	timer.function = profile_spus;
-
-	/* Allocate arrays for collecting SPU PC samples */
-	samples = kcalloc(SPUS_PER_NODE * TRACE_ARRAY_SIZE, sizeof(u32),
-			  GFP_KERNEL);
-
-	if (!samples)
-		return -ENOMEM;
-
-	spu_prof_running = 1;
-	hrtimer_start(&timer, kt, HRTIMER_MODE_REL);
-	schedule_delayed_work(&spu_work, DEFAULT_TIMER_EXPIRE);
-
-	return 0;
-}
-
-/*
- * Entry point for SPU event profiling.
- * NOTE:  SPU profiling is done system-wide, not per-CPU.
- *
- * cycles_reset is the count value specified by the user when
- * setting up OProfile to count SPU_CYCLES.
- */
-void start_spu_profiling_events(void)
-{
-	spu_prof_running = 1;
-	schedule_delayed_work(&spu_work, DEFAULT_TIMER_EXPIRE);
-
-	return;
-}
-
-void stop_spu_profiling_cycles(void)
-{
-	spu_prof_running = 0;
-	hrtimer_cancel(&timer);
-	kfree(samples);
-	pr_debug("SPU_PROF: stop_spu_profiling_cycles issued\n");
-}
-
-void stop_spu_profiling_events(void)
-{
-	spu_prof_running = 0;
-}
diff --git a/arch/powerpc/oprofile/cell/spu_task_sync.c b/arch/powerpc/oprofile/cell/spu_task_sync.c
deleted file mode 100644
index 489f993100d5..000000000000
--- a/arch/powerpc/oprofile/cell/spu_task_sync.c
+++ /dev/null
@@ -1,657 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Cell Broadband Engine OProfile Support
- *
- * (C) Copyright IBM Corporation 2006
- *
- * Author: Maynard Johnson <maynardj@us.ibm.com>
- */
-
-/* The purpose of this file is to handle SPU event task switching
- * and to record SPU context information into the OProfile
- * event buffer.
- *
- * Additionally, the spu_sync_buffer function is provided as a helper
- * for recoding actual SPU program counter samples to the event buffer.
- */
-#include <linux/dcookies.h>
-#include <linux/kref.h>
-#include <linux/mm.h>
-#include <linux/fs.h>
-#include <linux/file.h>
-#include <linux/module.h>
-#include <linux/notifier.h>
-#include <linux/numa.h>
-#include <linux/oprofile.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include "pr_util.h"
-
-#define RELEASE_ALL 9999
-
-static DEFINE_SPINLOCK(buffer_lock);
-static DEFINE_SPINLOCK(cache_lock);
-static int num_spu_nodes;
-static int spu_prof_num_nodes;
-
-struct spu_buffer spu_buff[MAX_NUMNODES * SPUS_PER_NODE];
-struct delayed_work spu_work;
-static unsigned max_spu_buff;
-
-static void spu_buff_add(unsigned long int value, int spu)
-{
-	/* spu buff is a circular buffer.  Add entries to the
-	 * head.  Head is the index to store the next value.
-	 * The buffer is full when there is one available entry
-	 * in the queue, i.e. head and tail can't be equal.
-	 * That way we can tell the difference between the
-	 * buffer being full versus empty.
-	 *
-	 *  ASSUMPTION: the buffer_lock is held when this function
-	 *             is called to lock the buffer, head and tail.
-	 */
-	int full = 1;
-
-	if (spu_buff[spu].head >= spu_buff[spu].tail) {
-		if ((spu_buff[spu].head - spu_buff[spu].tail)
-		    <  (max_spu_buff - 1))
-			full = 0;
-
-	} else if (spu_buff[spu].tail > spu_buff[spu].head) {
-		if ((spu_buff[spu].tail - spu_buff[spu].head)
-		    > 1)
-			full = 0;
-	}
-
-	if (!full) {
-		spu_buff[spu].buff[spu_buff[spu].head] = value;
-		spu_buff[spu].head++;
-
-		if (spu_buff[spu].head >= max_spu_buff)
-			spu_buff[spu].head = 0;
-	} else {
-		/* From the user's perspective make the SPU buffer
-		 * size management/overflow look like we are using
-		 * per cpu buffers.  The user uses the same
-		 * per cpu parameter to adjust the SPU buffer size.
-		 * Increment the sample_lost_overflow to inform
-		 * the user the buffer size needs to be increased.
-		 */
-		oprofile_cpu_buffer_inc_smpl_lost();
-	}
-}
-
-/* This function copies the per SPU buffers to the
- * OProfile kernel buffer.
- */
-static void sync_spu_buff(void)
-{
-	int spu;
-	unsigned long flags;
-	int curr_head;
-
-	for (spu = 0; spu < num_spu_nodes; spu++) {
-		/* In case there was an issue and the buffer didn't
-		 * get created skip it.
-		 */
-		if (spu_buff[spu].buff == NULL)
-			continue;
-
-		/* Hold the lock to make sure the head/tail
-		 * doesn't change while spu_buff_add() is
-		 * deciding if the buffer is full or not.
-		 * Being a little paranoid.
-		 */
-		spin_lock_irqsave(&buffer_lock, flags);
-		curr_head = spu_buff[spu].head;
-		spin_unlock_irqrestore(&buffer_lock, flags);
-
-		/* Transfer the current contents to the kernel buffer.
-		 * data can still be added to the head of the buffer.
-		 */
-		oprofile_put_buff(spu_buff[spu].buff,
-				  spu_buff[spu].tail,
-				  curr_head, max_spu_buff);
-
-		spin_lock_irqsave(&buffer_lock, flags);
-		spu_buff[spu].tail = curr_head;
-		spin_unlock_irqrestore(&buffer_lock, flags);
-	}
-
-}
-
-static void wq_sync_spu_buff(struct work_struct *work)
-{
-	/* move data from spu buffers to kernel buffer */
-	sync_spu_buff();
-
-	/* only reschedule if profiling is not done */
-	if (spu_prof_running)
-		schedule_delayed_work(&spu_work, DEFAULT_TIMER_EXPIRE);
-}
-
-/* Container for caching information about an active SPU task. */
-struct cached_info {
-	struct vma_to_fileoffset_map *map;
-	struct spu *the_spu;	/* needed to access pointer to local_store */
-	struct kref cache_ref;
-};
-
-static struct cached_info *spu_info[MAX_NUMNODES * 8];
-
-static void destroy_cached_info(struct kref *kref)
-{
-	struct cached_info *info;
-
-	info = container_of(kref, struct cached_info, cache_ref);
-	vma_map_free(info->map);
-	kfree(info);
-	module_put(THIS_MODULE);
-}
-
-/* Return the cached_info for the passed SPU number.
- * ATTENTION:  Callers are responsible for obtaining the
- *	       cache_lock if needed prior to invoking this function.
- */
-static struct cached_info *get_cached_info(struct spu *the_spu, int spu_num)
-{
-	struct kref *ref;
-	struct cached_info *ret_info;
-
-	if (spu_num >= num_spu_nodes) {
-		printk(KERN_ERR "SPU_PROF: "
-		       "%s, line %d: Invalid index %d into spu info cache\n",
-		       __func__, __LINE__, spu_num);
-		ret_info = NULL;
-		goto out;
-	}
-	if (!spu_info[spu_num] && the_spu) {
-		ref = spu_get_profile_private_kref(the_spu->ctx);
-		if (ref) {
-			spu_info[spu_num] = container_of(ref, struct cached_info, cache_ref);
-			kref_get(&spu_info[spu_num]->cache_ref);
-		}
-	}
-
-	ret_info = spu_info[spu_num];
- out:
-	return ret_info;
-}
-
-
-/* Looks for cached info for the passed spu.  If not found, the
- * cached info is created for the passed spu.
- * Returns 0 for success; otherwise, -1 for error.
- */
-static int
-prepare_cached_spu_info(struct spu *spu, unsigned long objectId)
-{
-	unsigned long flags;
-	struct vma_to_fileoffset_map *new_map;
-	int retval = 0;
-	struct cached_info *info;
-
-	/* We won't bother getting cache_lock here since
-	 * don't do anything with the cached_info that's returned.
-	 */
-	info = get_cached_info(spu, spu->number);
-
-	if (info) {
-		pr_debug("Found cached SPU info.\n");
-		goto out;
-	}
-
-	/* Create cached_info and set spu_info[spu->number] to point to it.
-	 * spu->number is a system-wide value, not a per-node value.
-	 */
-	info = kzalloc(sizeof(*info), GFP_KERNEL);
-	if (!info) {
-		printk(KERN_ERR "SPU_PROF: "
-		       "%s, line %d: create vma_map failed\n",
-		       __func__, __LINE__);
-		retval = -ENOMEM;
-		goto err_alloc;
-	}
-	new_map = create_vma_map(spu, objectId);
-	if (!new_map) {
-		printk(KERN_ERR "SPU_PROF: "
-		       "%s, line %d: create vma_map failed\n",
-		       __func__, __LINE__);
-		retval = -ENOMEM;
-		goto err_alloc;
-	}
-
-	pr_debug("Created vma_map\n");
-	info->map = new_map;
-	info->the_spu = spu;
-	kref_init(&info->cache_ref);
-	spin_lock_irqsave(&cache_lock, flags);
-	spu_info[spu->number] = info;
-	/* Increment count before passing off ref to SPUFS. */
-	kref_get(&info->cache_ref);
-
-	/* We increment the module refcount here since SPUFS is
-	 * responsible for the final destruction of the cached_info,
-	 * and it must be able to access the destroy_cached_info()
-	 * function defined in the OProfile module.  We decrement
-	 * the module refcount in destroy_cached_info.
-	 */
-	try_module_get(THIS_MODULE);
-	spu_set_profile_private_kref(spu->ctx, &info->cache_ref,
-				destroy_cached_info);
-	spin_unlock_irqrestore(&cache_lock, flags);
-	goto out;
-
-err_alloc:
-	kfree(info);
-out:
-	return retval;
-}
-
-/*
- * NOTE:  The caller is responsible for locking the
- *	  cache_lock prior to calling this function.
- */
-static int release_cached_info(int spu_index)
-{
-	int index, end;
-
-	if (spu_index == RELEASE_ALL) {
-		end = num_spu_nodes;
-		index = 0;
-	} else {
-		if (spu_index >= num_spu_nodes) {
-			printk(KERN_ERR "SPU_PROF: "
-				"%s, line %d: "
-				"Invalid index %d into spu info cache\n",
-				__func__, __LINE__, spu_index);
-			goto out;
-		}
-		end = spu_index + 1;
-		index = spu_index;
-	}
-	for (; index < end; index++) {
-		if (spu_info[index]) {
-			kref_put(&spu_info[index]->cache_ref,
-				 destroy_cached_info);
-			spu_info[index] = NULL;
-		}
-	}
-
-out:
-	return 0;
-}
-
-/* The source code for fast_get_dcookie was "borrowed"
- * from drivers/oprofile/buffer_sync.c.
- */
-
-/* Optimisation. We can manage without taking the dcookie sem
- * because we cannot reach this code without at least one
- * dcookie user still being registered (namely, the reader
- * of the event buffer).
- */
-static inline unsigned long fast_get_dcookie(const struct path *path)
-{
-	unsigned long cookie;
-
-	if (path->dentry->d_flags & DCACHE_COOKIE)
-		return (unsigned long)path->dentry;
-	get_dcookie(path, &cookie);
-	return cookie;
-}
-
-/* Look up the dcookie for the task's mm->exe_file,
- * which corresponds loosely to "application name". Also, determine
- * the offset for the SPU ELF object.  If computed offset is
- * non-zero, it implies an embedded SPU object; otherwise, it's a
- * separate SPU binary, in which case we retrieve it's dcookie.
- * For the embedded case, we must determine if SPU ELF is embedded
- * in the executable application or another file (i.e., shared lib).
- * If embedded in a shared lib, we must get the dcookie and return
- * that to the caller.
- */
-static unsigned long
-get_exec_dcookie_and_offset(struct spu *spu, unsigned int *offsetp,
-			    unsigned long *spu_bin_dcookie,
-			    unsigned long spu_ref)
-{
-	unsigned long app_cookie = 0;
-	unsigned int my_offset = 0;
-	struct vm_area_struct *vma;
-	struct file *exe_file;
-	struct mm_struct *mm = spu->mm;
-
-	if (!mm)
-		goto out;
-
-	exe_file = get_mm_exe_file(mm);
-	if (exe_file) {
-		app_cookie = fast_get_dcookie(&exe_file->f_path);
-		pr_debug("got dcookie for %pD\n", exe_file);
-		fput(exe_file);
-	}
-
-	mmap_read_lock(mm);
-	for (vma = mm->mmap; vma; vma = vma->vm_next) {
-		if (vma->vm_start > spu_ref || vma->vm_end <= spu_ref)
-			continue;
-		my_offset = spu_ref - vma->vm_start;
-		if (!vma->vm_file)
-			goto fail_no_image_cookie;
-
-		pr_debug("Found spu ELF at %X(object-id:%lx) for file %pD\n",
-			 my_offset, spu_ref, vma->vm_file);
-		*offsetp = my_offset;
-		break;
-	}
-
-	*spu_bin_dcookie = fast_get_dcookie(&vma->vm_file->f_path);
-	pr_debug("got dcookie for %pD\n", vma->vm_file);
-
-	mmap_read_unlock(mm);
-
-out:
-	return app_cookie;
-
-fail_no_image_cookie:
-	mmap_read_unlock(mm);
-
-	printk(KERN_ERR "SPU_PROF: "
-		"%s, line %d: Cannot find dcookie for SPU binary\n",
-		__func__, __LINE__);
-	goto out;
-}
-
-
-
-/* This function finds or creates cached context information for the
- * passed SPU and records SPU context information into the OProfile
- * event buffer.
- */
-static int process_context_switch(struct spu *spu, unsigned long objectId)
-{
-	unsigned long flags;
-	int retval;
-	unsigned int offset = 0;
-	unsigned long spu_cookie = 0, app_dcookie;
-
-	retval = prepare_cached_spu_info(spu, objectId);
-	if (retval)
-		goto out;
-
-	/* Get dcookie first because a mutex_lock is taken in that
-	 * code path, so interrupts must not be disabled.
-	 */
-	app_dcookie = get_exec_dcookie_and_offset(spu, &offset, &spu_cookie, objectId);
-	if (!app_dcookie || !spu_cookie) {
-		retval  = -ENOENT;
-		goto out;
-	}
-
-	/* Record context info in event buffer */
-	spin_lock_irqsave(&buffer_lock, flags);
-	spu_buff_add(ESCAPE_CODE, spu->number);
-	spu_buff_add(SPU_CTX_SWITCH_CODE, spu->number);
-	spu_buff_add(spu->number, spu->number);
-	spu_buff_add(spu->pid, spu->number);
-	spu_buff_add(spu->tgid, spu->number);
-	spu_buff_add(app_dcookie, spu->number);
-	spu_buff_add(spu_cookie, spu->number);
-	spu_buff_add(offset, spu->number);
-
-	/* Set flag to indicate SPU PC data can now be written out.  If
-	 * the SPU program counter data is seen before an SPU context
-	 * record is seen, the postprocessing will fail.
-	 */
-	spu_buff[spu->number].ctx_sw_seen = 1;
-
-	spin_unlock_irqrestore(&buffer_lock, flags);
-	smp_wmb();	/* insure spu event buffer updates are written */
-			/* don't want entries intermingled... */
-out:
-	return retval;
-}
-
-/*
- * This function is invoked on either a bind_context or unbind_context.
- * If called for an unbind_context, the val arg is 0; otherwise,
- * it is the object-id value for the spu context.
- * The data arg is of type 'struct spu *'.
- */
-static int spu_active_notify(struct notifier_block *self, unsigned long val,
-				void *data)
-{
-	int retval;
-	unsigned long flags;
-	struct spu *the_spu = data;
-
-	pr_debug("SPU event notification arrived\n");
-	if (!val) {
-		spin_lock_irqsave(&cache_lock, flags);
-		retval = release_cached_info(the_spu->number);
-		spin_unlock_irqrestore(&cache_lock, flags);
-	} else {
-		retval = process_context_switch(the_spu, val);
-	}
-	return retval;
-}
-
-static struct notifier_block spu_active = {
-	.notifier_call = spu_active_notify,
-};
-
-static int number_of_online_nodes(void)
-{
-        u32 cpu; u32 tmp;
-        int nodes = 0;
-        for_each_online_cpu(cpu) {
-                tmp = cbe_cpu_to_node(cpu) + 1;
-                if (tmp > nodes)
-                        nodes++;
-        }
-        return nodes;
-}
-
-static int oprofile_spu_buff_create(void)
-{
-	int spu;
-
-	max_spu_buff = oprofile_get_cpu_buffer_size();
-
-	for (spu = 0; spu < num_spu_nodes; spu++) {
-		/* create circular buffers to store the data in.
-		 * use locks to manage accessing the buffers
-		 */
-		spu_buff[spu].head = 0;
-		spu_buff[spu].tail = 0;
-
-		/*
-		 * Create a buffer for each SPU.  Can't reliably
-		 * create a single buffer for all spus due to not
-		 * enough contiguous kernel memory.
-		 */
-
-		spu_buff[spu].buff = kzalloc((max_spu_buff
-					      * sizeof(unsigned long)),
-					     GFP_KERNEL);
-
-		if (!spu_buff[spu].buff) {
-			printk(KERN_ERR "SPU_PROF: "
-			       "%s, line %d:  oprofile_spu_buff_create "
-		       "failed to allocate spu buffer %d.\n",
-			       __func__, __LINE__, spu);
-
-			/* release the spu buffers that have been allocated */
-			while (spu >= 0) {
-				kfree(spu_buff[spu].buff);
-				spu_buff[spu].buff = 0;
-				spu--;
-			}
-			return -ENOMEM;
-		}
-	}
-	return 0;
-}
-
-/* The main purpose of this function is to synchronize
- * OProfile with SPUFS by registering to be notified of
- * SPU task switches.
- *
- * NOTE: When profiling SPUs, we must ensure that only
- * spu_sync_start is invoked and not the generic sync_start
- * in drivers/oprofile/oprof.c.	 A return value of
- * SKIP_GENERIC_SYNC or SYNC_START_ERROR will
- * accomplish this.
- */
-int spu_sync_start(void)
-{
-	int spu;
-	int ret = SKIP_GENERIC_SYNC;
-	int register_ret;
-	unsigned long flags = 0;
-
-	spu_prof_num_nodes = number_of_online_nodes();
-	num_spu_nodes = spu_prof_num_nodes * 8;
-	INIT_DELAYED_WORK(&spu_work, wq_sync_spu_buff);
-
-	/* create buffer for storing the SPU data to put in
-	 * the kernel buffer.
-	 */
-	ret = oprofile_spu_buff_create();
-	if (ret)
-		goto out;
-
-	spin_lock_irqsave(&buffer_lock, flags);
-	for (spu = 0; spu < num_spu_nodes; spu++) {
-		spu_buff_add(ESCAPE_CODE, spu);
-		spu_buff_add(SPU_PROFILING_CODE, spu);
-		spu_buff_add(num_spu_nodes, spu);
-	}
-	spin_unlock_irqrestore(&buffer_lock, flags);
-
-	for (spu = 0; spu < num_spu_nodes; spu++) {
-		spu_buff[spu].ctx_sw_seen = 0;
-		spu_buff[spu].last_guard_val = 0;
-	}
-
-	/* Register for SPU events  */
-	register_ret = spu_switch_event_register(&spu_active);
-	if (register_ret) {
-		ret = SYNC_START_ERROR;
-		goto out;
-	}
-
-	pr_debug("spu_sync_start -- running.\n");
-out:
-	return ret;
-}
-
-/* Record SPU program counter samples to the oprofile event buffer. */
-void spu_sync_buffer(int spu_num, unsigned int *samples,
-		     int num_samples)
-{
-	unsigned long long file_offset;
-	unsigned long flags;
-	int i;
-	struct vma_to_fileoffset_map *map;
-	struct spu *the_spu;
-	unsigned long long spu_num_ll = spu_num;
-	unsigned long long spu_num_shifted = spu_num_ll << 32;
-	struct cached_info *c_info;
-
-	/* We need to obtain the cache_lock here because it's
-	 * possible that after getting the cached_info, the SPU job
-	 * corresponding to this cached_info may end, thus resulting
-	 * in the destruction of the cached_info.
-	 */
-	spin_lock_irqsave(&cache_lock, flags);
-	c_info = get_cached_info(NULL, spu_num);
-	if (!c_info) {
-		/* This legitimately happens when the SPU task ends before all
-		 * samples are recorded.
-		 * No big deal -- so we just drop a few samples.
-		 */
-		pr_debug("SPU_PROF: No cached SPU context "
-			  "for SPU #%d. Dropping samples.\n", spu_num);
-		goto out;
-	}
-
-	map = c_info->map;
-	the_spu = c_info->the_spu;
-	spin_lock(&buffer_lock);
-	for (i = 0; i < num_samples; i++) {
-		unsigned int sample = *(samples+i);
-		int grd_val = 0;
-		file_offset = 0;
-		if (sample == 0)
-			continue;
-		file_offset = vma_map_lookup( map, sample, the_spu, &grd_val);
-
-		/* If overlays are used by this SPU application, the guard
-		 * value is non-zero, indicating which overlay section is in
-		 * use.	 We need to discard samples taken during the time
-		 * period which an overlay occurs (i.e., guard value changes).
-		 */
-		if (grd_val && grd_val != spu_buff[spu_num].last_guard_val) {
-			spu_buff[spu_num].last_guard_val = grd_val;
-			/* Drop the rest of the samples. */
-			break;
-		}
-
-		/* We must ensure that the SPU context switch has been written
-		 * out before samples for the SPU.  Otherwise, the SPU context
-		 * information is not available and the postprocessing of the
-		 * SPU PC will fail with no available anonymous map information.
-		 */
-		if (spu_buff[spu_num].ctx_sw_seen)
-			spu_buff_add((file_offset | spu_num_shifted),
-					 spu_num);
-	}
-	spin_unlock(&buffer_lock);
-out:
-	spin_unlock_irqrestore(&cache_lock, flags);
-}
-
-
-int spu_sync_stop(void)
-{
-	unsigned long flags = 0;
-	int ret;
-	int k;
-
-	ret = spu_switch_event_unregister(&spu_active);
-
-	if (ret)
-		printk(KERN_ERR "SPU_PROF: "
-		       "%s, line %d: spu_switch_event_unregister "	\
-		       "returned %d\n",
-		       __func__, __LINE__, ret);
-
-	/* flush any remaining data in the per SPU buffers */
-	sync_spu_buff();
-
-	spin_lock_irqsave(&cache_lock, flags);
-	ret = release_cached_info(RELEASE_ALL);
-	spin_unlock_irqrestore(&cache_lock, flags);
-
-	/* remove scheduled work queue item rather then waiting
-	 * for every queued entry to execute.  Then flush pending
-	 * system wide buffer to event buffer.
-	 */
-	cancel_delayed_work(&spu_work);
-
-	for (k = 0; k < num_spu_nodes; k++) {
-		spu_buff[k].ctx_sw_seen = 0;
-
-		/*
-		 * spu_sys_buff will be null if there was a problem
-		 * allocating the buffer.  Only delete if it exists.
-		 */
-		kfree(spu_buff[k].buff);
-		spu_buff[k].buff = 0;
-	}
-	pr_debug("spu_sync_stop -- done.\n");
-	return ret;
-}
-
diff --git a/arch/powerpc/oprofile/cell/vma_map.c b/arch/powerpc/oprofile/cell/vma_map.c
deleted file mode 100644
index 7c4b19cfde88..000000000000
--- a/arch/powerpc/oprofile/cell/vma_map.c
+++ /dev/null
@@ -1,279 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Cell Broadband Engine OProfile Support
- *
- * (C) Copyright IBM Corporation 2006
- *
- * Author: Maynard Johnson <maynardj@us.ibm.com>
- */
-
-/* The code in this source file is responsible for generating
- * vma-to-fileOffset maps for both overlay and non-overlay SPU
- * applications.
- */
-
-#include <linux/mm.h>
-#include <linux/string.h>
-#include <linux/uaccess.h>
-#include <linux/elf.h>
-#include <linux/slab.h>
-#include "pr_util.h"
-
-
-void vma_map_free(struct vma_to_fileoffset_map *map)
-{
-	while (map) {
-		struct vma_to_fileoffset_map *next = map->next;
-		kfree(map);
-		map = next;
-	}
-}
-
-unsigned int
-vma_map_lookup(struct vma_to_fileoffset_map *map, unsigned int vma,
-	       const struct spu *aSpu, int *grd_val)
-{
-	/*
-	 * Default the offset to the physical address + a flag value.
-	 * Addresses of dynamically generated code can't be found in the vma
-	 * map.  For those addresses the flagged value will be sent on to
-	 * the user space tools so they can be reported rather than just
-	 * thrown away.
-	 */
-	u32 offset = 0x10000000 + vma;
-	u32 ovly_grd;
-
-	for (; map; map = map->next) {
-		if (vma < map->vma || vma >= map->vma + map->size)
-			continue;
-
-		if (map->guard_ptr) {
-			ovly_grd = *(u32 *)(aSpu->local_store + map->guard_ptr);
-			if (ovly_grd != map->guard_val)
-				continue;
-			*grd_val = ovly_grd;
-		}
-		offset = vma - map->vma + map->offset;
-		break;
-	}
-
-	return offset;
-}
-
-static struct vma_to_fileoffset_map *
-vma_map_add(struct vma_to_fileoffset_map *map, unsigned int vma,
-	    unsigned int size, unsigned int offset, unsigned int guard_ptr,
-	    unsigned int guard_val)
-{
-	struct vma_to_fileoffset_map *new = kzalloc(sizeof(*new), GFP_KERNEL);
-
-	if (!new) {
-		printk(KERN_ERR "SPU_PROF: %s, line %d: malloc failed\n",
-		       __func__, __LINE__);
-		vma_map_free(map);
-		return NULL;
-	}
-
-	new->next = map;
-	new->vma = vma;
-	new->size = size;
-	new->offset = offset;
-	new->guard_ptr = guard_ptr;
-	new->guard_val = guard_val;
-
-	return new;
-}
-
-
-/* Parse SPE ELF header and generate a list of vma_maps.
- * A pointer to the first vma_map in the generated list
- * of vma_maps is returned.  */
-struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu,
-					     unsigned long __spu_elf_start)
-{
-	static const unsigned char expected[EI_PAD] = {
-		[EI_MAG0] = ELFMAG0,
-		[EI_MAG1] = ELFMAG1,
-		[EI_MAG2] = ELFMAG2,
-		[EI_MAG3] = ELFMAG3,
-		[EI_CLASS] = ELFCLASS32,
-		[EI_DATA] = ELFDATA2MSB,
-		[EI_VERSION] = EV_CURRENT,
-		[EI_OSABI] = ELFOSABI_NONE
-	};
-
-	int grd_val;
-	struct vma_to_fileoffset_map *map = NULL;
-	void __user *spu_elf_start = (void __user *)__spu_elf_start;
-	struct spu_overlay_info ovly;
-	unsigned int overlay_tbl_offset = -1;
-	Elf32_Phdr __user *phdr_start;
-	Elf32_Shdr __user *shdr_start;
-	Elf32_Ehdr ehdr;
-	Elf32_Phdr phdr;
-	Elf32_Shdr shdr, shdr_str;
-	Elf32_Sym sym;
-	int i, j;
-	char name[32];
-
-	unsigned int ovly_table_sym = 0;
-	unsigned int ovly_buf_table_sym = 0;
-	unsigned int ovly_table_end_sym = 0;
-	unsigned int ovly_buf_table_end_sym = 0;
-	struct spu_overlay_info __user *ovly_table;
-	unsigned int n_ovlys;
-
-	/* Get and validate ELF header.	 */
-
-	if (copy_from_user(&ehdr, spu_elf_start, sizeof (ehdr)))
-		goto fail;
-
-	if (memcmp(ehdr.e_ident, expected, EI_PAD) != 0) {
-		printk(KERN_ERR "SPU_PROF: "
-		       "%s, line %d: Unexpected e_ident parsing SPU ELF\n",
-		       __func__, __LINE__);
-		goto fail;
-	}
-	if (ehdr.e_machine != EM_SPU) {
-		printk(KERN_ERR "SPU_PROF: "
-		       "%s, line %d: Unexpected e_machine parsing SPU ELF\n",
-		       __func__,  __LINE__);
-		goto fail;
-	}
-	if (ehdr.e_type != ET_EXEC) {
-		printk(KERN_ERR "SPU_PROF: "
-		       "%s, line %d: Unexpected e_type parsing SPU ELF\n",
-		       __func__, __LINE__);
-		goto fail;
-	}
-	phdr_start = spu_elf_start + ehdr.e_phoff;
-	shdr_start = spu_elf_start + ehdr.e_shoff;
-
-	/* Traverse program headers.  */
-	for (i = 0; i < ehdr.e_phnum; i++) {
-		if (copy_from_user(&phdr, phdr_start + i, sizeof(phdr)))
-			goto fail;
-
-		if (phdr.p_type != PT_LOAD)
-			continue;
-		if (phdr.p_flags & (1 << 27))
-			continue;
-
-		map = vma_map_add(map, phdr.p_vaddr, phdr.p_memsz,
-				  phdr.p_offset, 0, 0);
-		if (!map)
-			goto fail;
-	}
-
-	pr_debug("SPU_PROF: Created non-overlay maps\n");
-	/* Traverse section table and search for overlay-related symbols.  */
-	for (i = 0; i < ehdr.e_shnum; i++) {
-		if (copy_from_user(&shdr, shdr_start + i, sizeof(shdr)))
-			goto fail;
-
-		if (shdr.sh_type != SHT_SYMTAB)
-			continue;
-		if (shdr.sh_entsize != sizeof (sym))
-			continue;
-
-		if (copy_from_user(&shdr_str,
-				   shdr_start + shdr.sh_link,
-				   sizeof(shdr)))
-			goto fail;
-
-		if (shdr_str.sh_type != SHT_STRTAB)
-			goto fail;
-
-		for (j = 0; j < shdr.sh_size / sizeof (sym); j++) {
-			if (copy_from_user(&sym, spu_elf_start +
-						 shdr.sh_offset +
-						 j * sizeof (sym),
-					   sizeof (sym)))
-				goto fail;
-
-			if (copy_from_user(name, 
-					   spu_elf_start + shdr_str.sh_offset +
-					   sym.st_name,
-					   20))
-				goto fail;
-
-			if (memcmp(name, "_ovly_table", 12) == 0)
-				ovly_table_sym = sym.st_value;
-			if (memcmp(name, "_ovly_buf_table", 16) == 0)
-				ovly_buf_table_sym = sym.st_value;
-			if (memcmp(name, "_ovly_table_end", 16) == 0)
-				ovly_table_end_sym = sym.st_value;
-			if (memcmp(name, "_ovly_buf_table_end", 20) == 0)
-				ovly_buf_table_end_sym = sym.st_value;
-		}
-	}
-
-	/* If we don't have overlays, we're done.  */
-	if (ovly_table_sym == 0 || ovly_buf_table_sym == 0
-	    || ovly_table_end_sym == 0 || ovly_buf_table_end_sym == 0) {
-		pr_debug("SPU_PROF: No overlay table found\n");
-		goto out;
-	} else {
-		pr_debug("SPU_PROF: Overlay table found\n");
-	}
-
-	/* The _ovly_table symbol represents a table with one entry
-	 * per overlay section.	 The _ovly_buf_table symbol represents
-	 * a table with one entry per overlay region.
-	 * The struct spu_overlay_info gives the structure of the _ovly_table
-	 * entries.  The structure of _ovly_table_buf is simply one
-	 * u32 word per entry.
-	 */
-	overlay_tbl_offset = vma_map_lookup(map, ovly_table_sym,
-					    aSpu, &grd_val);
-	if (overlay_tbl_offset > 0x10000000) {
-		printk(KERN_ERR "SPU_PROF: "
-		       "%s, line %d: Error finding SPU overlay table\n",
-		       __func__, __LINE__);
-		goto fail;
-	}
-	ovly_table = spu_elf_start + overlay_tbl_offset;
-
-	n_ovlys = (ovly_table_end_sym -
-		   ovly_table_sym) / sizeof (ovly);
-
-	/* Traverse overlay table.  */
-	for (i = 0; i < n_ovlys; i++) {
-		if (copy_from_user(&ovly, ovly_table + i, sizeof (ovly)))
-			goto fail;
-
-		/* The ovly.vma/size/offset arguments are analogous to the same
-		 * arguments used above for non-overlay maps.  The final two
-		 * args are referred to as the guard pointer and the guard
-		 * value.
-		 * The guard pointer is an entry in the _ovly_buf_table,
-		 * computed using ovly.buf as the index into the table.	 Since
-		 * ovly.buf values begin at '1' to reference the first (or 0th)
-		 * entry in the _ovly_buf_table, the computation subtracts 1
-		 * from ovly.buf.
-		 * The guard value is stored in the _ovly_buf_table entry and
-		 * is an index (starting at 1) back to the _ovly_table entry
-		 * that is pointing at this _ovly_buf_table entry.  So, for
-		 * example, for an overlay scenario with one overlay segment
-		 * and two overlay sections:
-		 *	- Section 1 points to the first entry of the
-		 *	  _ovly_buf_table, which contains a guard value
-		 *	  of '1', referencing the first (index=0) entry of
-		 *	  _ovly_table.
-		 *	- Section 2 points to the second entry of the
-		 *	  _ovly_buf_table, which contains a guard value
-		 *	  of '2', referencing the second (index=1) entry of
-		 *	  _ovly_table.
-		 */
-		map = vma_map_add(map, ovly.vma, ovly.size, ovly.offset,
-				  ovly_buf_table_sym + (ovly.buf-1) * 4, i+1);
-		if (!map)
-			goto fail;
-	}
-	goto out;
-
- fail:
-	map = NULL;
- out:
-	return map;
-}
diff --git a/arch/powerpc/oprofile/common.c b/arch/powerpc/oprofile/common.c
deleted file mode 100644
index 0fb528c2b3a1..000000000000
--- a/arch/powerpc/oprofile/common.c
+++ /dev/null
@@ -1,243 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * PPC 64 oprofile support:
- * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
- * PPC 32 oprofile support: (based on PPC 64 support)
- * Copyright (C) Freescale Semiconductor, Inc 2004
- *	Author: Andy Fleming
- *
- * Based on alpha version.
- */
-
-#include <linux/oprofile.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/errno.h>
-#include <asm/ptrace.h>
-#include <asm/pmc.h>
-#include <asm/cputable.h>
-#include <asm/oprofile_impl.h>
-#include <asm/firmware.h>
-
-static struct op_powerpc_model *model;
-
-static struct op_counter_config ctr[OP_MAX_COUNTER];
-static struct op_system_config sys;
-
-static int op_per_cpu_rc;
-
-static void op_handle_interrupt(struct pt_regs *regs)
-{
-	model->handle_interrupt(regs, ctr);
-}
-
-static void op_powerpc_cpu_setup(void *dummy)
-{
-	int ret;
-
-	ret = model->cpu_setup(ctr);
-
-	if (ret != 0)
-		op_per_cpu_rc = ret;
-}
-
-static int op_powerpc_setup(void)
-{
-	int err;
-
-	op_per_cpu_rc = 0;
-
-	/* Grab the hardware */
-	err = reserve_pmc_hardware(op_handle_interrupt);
-	if (err)
-		return err;
-
-	/* Pre-compute the values to stuff in the hardware registers.  */
-	op_per_cpu_rc = model->reg_setup(ctr, &sys, model->num_counters);
-
-	if (op_per_cpu_rc)
-		goto out;
-
-	/* Configure the registers on all cpus.	 If an error occurs on one
-	 * of the cpus, op_per_cpu_rc will be set to the error */
-	on_each_cpu(op_powerpc_cpu_setup, NULL, 1);
-
-out:	if (op_per_cpu_rc) {
-		/* error on setup release the performance counter hardware */
-		release_pmc_hardware();
-	}
-
-	return op_per_cpu_rc;
-}
-
-static void op_powerpc_shutdown(void)
-{
-	release_pmc_hardware();
-}
-
-static void op_powerpc_cpu_start(void *dummy)
-{
-	/* If any of the cpus have return an error, set the
-	 * global flag to the error so it can be returned
-	 * to the generic OProfile caller.
-	 */
-	int ret;
-
-	ret = model->start(ctr);
-	if (ret != 0)
-		op_per_cpu_rc = ret;
-}
-
-static int op_powerpc_start(void)
-{
-	op_per_cpu_rc = 0;
-
-	if (model->global_start)
-		return model->global_start(ctr);
-	if (model->start) {
-		on_each_cpu(op_powerpc_cpu_start, NULL, 1);
-		return op_per_cpu_rc;
-	}
-	return -EIO; /* No start function is defined for this
-			power architecture */
-}
-
-static inline void op_powerpc_cpu_stop(void *dummy)
-{
-	model->stop();
-}
-
-static void op_powerpc_stop(void)
-{
-	if (model->stop)
-		on_each_cpu(op_powerpc_cpu_stop, NULL, 1);
-        if (model->global_stop)
-                model->global_stop();
-}
-
-static int op_powerpc_create_files(struct dentry *root)
-{
-	int i;
-
-#ifdef CONFIG_PPC64
-	/*
-	 * There is one mmcr0, mmcr1 and mmcra for setting the events for
-	 * all of the counters.
-	 */
-	oprofilefs_create_ulong(root, "mmcr0", &sys.mmcr0);
-	oprofilefs_create_ulong(root, "mmcr1", &sys.mmcr1);
-	oprofilefs_create_ulong(root, "mmcra", &sys.mmcra);
-#ifdef CONFIG_OPROFILE_CELL
-	/* create a file the user tool can check to see what level of profiling
-	 * support exits with this kernel. Initialize bit mask to indicate
-	 * what support the kernel has:
-	 * bit 0      -  Supports SPU event profiling in addition to PPU
-	 *               event and cycles; and SPU cycle profiling
-	 * bits 1-31  -  Currently unused.
-	 *
-	 * If the file does not exist, then the kernel only supports SPU
-	 * cycle profiling, PPU event and cycle profiling.
-	 */
-	oprofilefs_create_ulong(root, "cell_support", &sys.cell_support);
-	sys.cell_support = 0x1; /* Note, the user OProfile tool must check
-				 * that this bit is set before attempting to
-				 * user SPU event profiling.  Older kernels
-				 * will not have this file, hence the user
-				 * tool is not allowed to do SPU event
-				 * profiling on older kernels.  Older kernels
-				 * will accept SPU events but collected data
-				 * is garbage.
-				 */
-#endif
-#endif
-
-	for (i = 0; i < model->num_counters; ++i) {
-		struct dentry *dir;
-		char buf[4];
-
-		snprintf(buf, sizeof buf, "%d", i);
-		dir = oprofilefs_mkdir(root, buf);
-
-		oprofilefs_create_ulong(dir, "enabled", &ctr[i].enabled);
-		oprofilefs_create_ulong(dir, "event", &ctr[i].event);
-		oprofilefs_create_ulong(dir, "count", &ctr[i].count);
-
-		/*
-		 * Classic PowerPC doesn't support per-counter
-		 * control like this, but the options are
-		 * expected, so they remain.  For Freescale
-		 * Book-E style performance monitors, we do
-		 * support them.
-		 */
-		oprofilefs_create_ulong(dir, "kernel", &ctr[i].kernel);
-		oprofilefs_create_ulong(dir, "user", &ctr[i].user);
-
-		oprofilefs_create_ulong(dir, "unit_mask", &ctr[i].unit_mask);
-	}
-
-	oprofilefs_create_ulong(root, "enable_kernel", &sys.enable_kernel);
-	oprofilefs_create_ulong(root, "enable_user", &sys.enable_user);
-
-	/* Default to tracing both kernel and user */
-	sys.enable_kernel = 1;
-	sys.enable_user = 1;
-
-	return 0;
-}
-
-int __init oprofile_arch_init(struct oprofile_operations *ops)
-{
-	if (!cur_cpu_spec->oprofile_cpu_type)
-		return -ENODEV;
-
-	switch (cur_cpu_spec->oprofile_type) {
-#ifdef CONFIG_PPC_BOOK3S_64
-#ifdef CONFIG_OPROFILE_CELL
-		case PPC_OPROFILE_CELL:
-			if (firmware_has_feature(FW_FEATURE_LPAR))
-				return -ENODEV;
-			model = &op_model_cell;
-			ops->sync_start = model->sync_start;
-			ops->sync_stop = model->sync_stop;
-			break;
-#endif
-		case PPC_OPROFILE_POWER4:
-			model = &op_model_power4;
-			break;
-		case PPC_OPROFILE_PA6T:
-			model = &op_model_pa6t;
-			break;
-#endif
-#ifdef CONFIG_PPC_BOOK3S_32
-		case PPC_OPROFILE_G4:
-			model = &op_model_7450;
-			break;
-#endif
-#if defined(CONFIG_FSL_EMB_PERFMON)
-		case PPC_OPROFILE_FSL_EMB:
-			model = &op_model_fsl_emb;
-			break;
-#endif
-		default:
-			return -ENODEV;
-	}
-
-	model->num_counters = cur_cpu_spec->num_pmcs;
-
-	ops->cpu_type = cur_cpu_spec->oprofile_cpu_type;
-	ops->create_files = op_powerpc_create_files;
-	ops->setup = op_powerpc_setup;
-	ops->shutdown = op_powerpc_shutdown;
-	ops->start = op_powerpc_start;
-	ops->stop = op_powerpc_stop;
-	ops->backtrace = op_powerpc_backtrace;
-
-	printk(KERN_DEBUG "oprofile: using %s performance monitoring.\n",
-	       ops->cpu_type);
-
-	return 0;
-}
-
-void oprofile_arch_exit(void)
-{
-}
diff --git a/arch/powerpc/oprofile/op_model_7450.c b/arch/powerpc/oprofile/op_model_7450.c
deleted file mode 100644
index 5ebc25188a72..000000000000
--- a/arch/powerpc/oprofile/op_model_7450.c
+++ /dev/null
@@ -1,207 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/powerpc/oprofile/op_model_7450.c
- *
- * Freescale 745x/744x oprofile support, based on fsl_booke support
- * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
- *
- * Copyright (c) 2004 Freescale Semiconductor, Inc
- *
- * Author: Andy Fleming
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- */
-
-#include <linux/oprofile.h>
-#include <linux/smp.h>
-#include <asm/ptrace.h>
-#include <asm/processor.h>
-#include <asm/cputable.h>
-#include <asm/page.h>
-#include <asm/pmc.h>
-#include <asm/oprofile_impl.h>
-
-static unsigned long reset_value[OP_MAX_COUNTER];
-
-static int oprofile_running;
-static u32 mmcr0_val, mmcr1_val, mmcr2_val, num_pmcs;
-
-#define MMCR0_PMC1_SHIFT	6
-#define MMCR0_PMC2_SHIFT	0
-#define MMCR1_PMC3_SHIFT	27
-#define MMCR1_PMC4_SHIFT	22
-#define MMCR1_PMC5_SHIFT	17
-#define MMCR1_PMC6_SHIFT	11
-
-#define mmcr0_event1(event) \
-	((event << MMCR0_PMC1_SHIFT) & MMCR0_PMC1SEL)
-#define mmcr0_event2(event) \
-	((event << MMCR0_PMC2_SHIFT) & MMCR0_PMC2SEL)
-
-#define mmcr1_event3(event) \
-	((event << MMCR1_PMC3_SHIFT) & MMCR1_PMC3SEL)
-#define mmcr1_event4(event) \
-	((event << MMCR1_PMC4_SHIFT) & MMCR1_PMC4SEL)
-#define mmcr1_event5(event) \
-	((event << MMCR1_PMC5_SHIFT) & MMCR1_PMC5SEL)
-#define mmcr1_event6(event) \
-	((event << MMCR1_PMC6_SHIFT) & MMCR1_PMC6SEL)
-
-#define MMCR0_INIT (MMCR0_FC | MMCR0_FCS | MMCR0_FCP | MMCR0_FCM1 | MMCR0_FCM0)
-
-/* Unfreezes the counters on this CPU, enables the interrupt,
- * enables the counters to trigger the interrupt, and sets the
- * counters to only count when the mark bit is not set.
- */
-static void pmc_start_ctrs(void)
-{
-	u32 mmcr0 = mfspr(SPRN_MMCR0);
-
-	mmcr0 &= ~(MMCR0_FC | MMCR0_FCM0);
-	mmcr0 |= (MMCR0_FCECE | MMCR0_PMC1CE | MMCR0_PMCnCE | MMCR0_PMXE);
-
-	mtspr(SPRN_MMCR0, mmcr0);
-}
-
-/* Disables the counters on this CPU, and freezes them */
-static void pmc_stop_ctrs(void)
-{
-	u32 mmcr0 = mfspr(SPRN_MMCR0);
-
-	mmcr0 |= MMCR0_FC;
-	mmcr0 &= ~(MMCR0_FCECE | MMCR0_PMC1CE | MMCR0_PMCnCE | MMCR0_PMXE);
-
-	mtspr(SPRN_MMCR0, mmcr0);
-}
-
-/* Configures the counters on this CPU based on the global
- * settings */
-static int fsl7450_cpu_setup(struct op_counter_config *ctr)
-{
-	/* freeze all counters */
-	pmc_stop_ctrs();
-
-	mtspr(SPRN_MMCR0, mmcr0_val);
-	mtspr(SPRN_MMCR1, mmcr1_val);
-	if (num_pmcs > 4)
-		mtspr(SPRN_MMCR2, mmcr2_val);
-
-	return 0;
-}
-
-/* Configures the global settings for the countes on all CPUs. */
-static int fsl7450_reg_setup(struct op_counter_config *ctr,
-			     struct op_system_config *sys,
-			     int num_ctrs)
-{
-	int i;
-
-	num_pmcs = num_ctrs;
-	/* Our counters count up, and "count" refers to
-	 * how much before the next interrupt, and we interrupt
-	 * on overflow.  So we calculate the starting value
-	 * which will give us "count" until overflow.
-	 * Then we set the events on the enabled counters */
-	for (i = 0; i < num_ctrs; ++i)
-		reset_value[i] = 0x80000000UL - ctr[i].count;
-
-	/* Set events for Counters 1 & 2 */
-	mmcr0_val = MMCR0_INIT | mmcr0_event1(ctr[0].event)
-		| mmcr0_event2(ctr[1].event);
-
-	/* Setup user/kernel bits */
-	if (sys->enable_kernel)
-		mmcr0_val &= ~(MMCR0_FCS);
-
-	if (sys->enable_user)
-		mmcr0_val &= ~(MMCR0_FCP);
-
-	/* Set events for Counters 3-6 */
-	mmcr1_val = mmcr1_event3(ctr[2].event)
-		| mmcr1_event4(ctr[3].event);
-	if (num_ctrs > 4)
-		mmcr1_val |= mmcr1_event5(ctr[4].event)
-			| mmcr1_event6(ctr[5].event);
-
-	mmcr2_val = 0;
-
-	return 0;
-}
-
-/* Sets the counters on this CPU to the chosen values, and starts them */
-static int fsl7450_start(struct op_counter_config *ctr)
-{
-	int i;
-
-	mtmsr(mfmsr() | MSR_PMM);
-
-	for (i = 0; i < num_pmcs; ++i) {
-		if (ctr[i].enabled)
-			classic_ctr_write(i, reset_value[i]);
-		else
-			classic_ctr_write(i, 0);
-	}
-
-	/* Clear the freeze bit, and enable the interrupt.
-	 * The counters won't actually start until the rfi clears
-	 * the PMM bit */
-	pmc_start_ctrs();
-
-	oprofile_running = 1;
-
-	return 0;
-}
-
-/* Stop the counters on this CPU */
-static void fsl7450_stop(void)
-{
-	/* freeze counters */
-	pmc_stop_ctrs();
-
-	oprofile_running = 0;
-
-	mb();
-}
-
-
-/* Handle the interrupt on this CPU, and log a sample for each
- * event that triggered the interrupt */
-static void fsl7450_handle_interrupt(struct pt_regs *regs,
-				    struct op_counter_config *ctr)
-{
-	unsigned long pc;
-	int is_kernel;
-	int val;
-	int i;
-
-	/* set the PMM bit (see comment below) */
-	mtmsr(mfmsr() | MSR_PMM);
-
-	pc = mfspr(SPRN_SIAR);
-	is_kernel = is_kernel_addr(pc);
-
-	for (i = 0; i < num_pmcs; ++i) {
-		val = classic_ctr_read(i);
-		if (val < 0) {
-			if (oprofile_running && ctr[i].enabled) {
-				oprofile_add_ext_sample(pc, regs, i, is_kernel);
-				classic_ctr_write(i, reset_value[i]);
-			} else {
-				classic_ctr_write(i, 0);
-			}
-		}
-	}
-
-	/* The freeze bit was set by the interrupt. */
-	/* Clear the freeze bit, and reenable the interrupt.
-	 * The counters won't actually start until the rfi clears
-	 * the PM/M bit */
-	pmc_start_ctrs();
-}
-
-struct op_powerpc_model op_model_7450= {
-	.reg_setup		= fsl7450_reg_setup,
-	.cpu_setup		= fsl7450_cpu_setup,
-	.start			= fsl7450_start,
-	.stop			= fsl7450_stop,
-	.handle_interrupt	= fsl7450_handle_interrupt,
-};
diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c
deleted file mode 100644
index 7eb73070b7be..000000000000
--- a/arch/powerpc/oprofile/op_model_cell.c
+++ /dev/null
@@ -1,1709 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Cell Broadband Engine OProfile Support
- *
- * (C) Copyright IBM Corporation 2006
- *
- * Author: David Erb (djerb@us.ibm.com)
- * Modifications:
- *	   Carl Love <carll@us.ibm.com>
- *	   Maynard Johnson <maynardj@us.ibm.com>
- */
-
-#include <linux/cpufreq.h>
-#include <linux/delay.h>
-#include <linux/jiffies.h>
-#include <linux/kthread.h>
-#include <linux/oprofile.h>
-#include <linux/percpu.h>
-#include <linux/smp.h>
-#include <linux/spinlock.h>
-#include <linux/timer.h>
-#include <asm/cell-pmu.h>
-#include <asm/cputable.h>
-#include <asm/firmware.h>
-#include <asm/io.h>
-#include <asm/oprofile_impl.h>
-#include <asm/processor.h>
-#include <asm/prom.h>
-#include <asm/ptrace.h>
-#include <asm/reg.h>
-#include <asm/rtas.h>
-#include <asm/cell-regs.h>
-
-#include "../platforms/cell/interrupt.h"
-#include "cell/pr_util.h"
-
-#define PPU_PROFILING            0
-#define SPU_PROFILING_CYCLES     1
-#define SPU_PROFILING_EVENTS     2
-
-#define SPU_EVENT_NUM_START      4100
-#define SPU_EVENT_NUM_STOP       4399
-#define SPU_PROFILE_EVENT_ADDR          4363  /* spu, address trace, decimal */
-#define SPU_PROFILE_EVENT_ADDR_MASK_A   0x146 /* sub unit set to zero */
-#define SPU_PROFILE_EVENT_ADDR_MASK_B   0x186 /* sub unit set to zero */
-
-#define NUM_SPUS_PER_NODE    8
-#define SPU_CYCLES_EVENT_NUM 2	/*  event number for SPU_CYCLES */
-
-#define PPU_CYCLES_EVENT_NUM 1	/*  event number for CYCLES */
-#define PPU_CYCLES_GRP_NUM   1	/* special group number for identifying
-				 * PPU_CYCLES event
-				 */
-#define CBE_COUNT_ALL_CYCLES 0x42800000 /* PPU cycle event specifier */
-
-#define NUM_THREADS 2         /* number of physical threads in
-			       * physical processor
-			       */
-#define NUM_DEBUG_BUS_WORDS 4
-#define NUM_INPUT_BUS_WORDS 2
-
-#define MAX_SPU_COUNT 0xFFFFFF	/* maximum 24 bit LFSR value */
-
-/* Minimum HW interval timer setting to send value to trace buffer is 10 cycle.
- * To configure counter to send value every N cycles set counter to
- * 2^32 - 1 - N.
- */
-#define NUM_INTERVAL_CYC  0xFFFFFFFF - 10
-
-/*
- * spu_cycle_reset is the number of cycles between samples.
- * This variable is used for SPU profiling and should ONLY be set
- * at the beginning of cell_reg_setup; otherwise, it's read-only.
- */
-static unsigned int spu_cycle_reset;
-static unsigned int profiling_mode;
-static int spu_evnt_phys_spu_indx;
-
-struct pmc_cntrl_data {
-	unsigned long vcntr;
-	unsigned long evnts;
-	unsigned long masks;
-	unsigned long enabled;
-};
-
-/*
- * ibm,cbe-perftools rtas parameters
- */
-struct pm_signal {
-	u16 cpu;		/* Processor to modify */
-	u16 sub_unit;		/* hw subunit this applies to (if applicable)*/
-	short int signal_group; /* Signal Group to Enable/Disable */
-	u8 bus_word;		/* Enable/Disable on this Trace/Trigger/Event
-				 * Bus Word(s) (bitmask)
-				 */
-	u8 bit;			/* Trigger/Event bit (if applicable) */
-};
-
-/*
- * rtas call arguments
- */
-enum {
-	SUBFUNC_RESET = 1,
-	SUBFUNC_ACTIVATE = 2,
-	SUBFUNC_DEACTIVATE = 3,
-
-	PASSTHRU_IGNORE = 0,
-	PASSTHRU_ENABLE = 1,
-	PASSTHRU_DISABLE = 2,
-};
-
-struct pm_cntrl {
-	u16 enable;
-	u16 stop_at_max;
-	u16 trace_mode;
-	u16 freeze;
-	u16 count_mode;
-	u16 spu_addr_trace;
-	u8  trace_buf_ovflw;
-};
-
-static struct {
-	u32 group_control;
-	u32 debug_bus_control;
-	struct pm_cntrl pm_cntrl;
-	u32 pm07_cntrl[NR_PHYS_CTRS];
-} pm_regs;
-
-#define GET_SUB_UNIT(x) ((x & 0x0000f000) >> 12)
-#define GET_BUS_WORD(x) ((x & 0x000000f0) >> 4)
-#define GET_BUS_TYPE(x) ((x & 0x00000300) >> 8)
-#define GET_POLARITY(x) ((x & 0x00000002) >> 1)
-#define GET_COUNT_CYCLES(x) (x & 0x00000001)
-#define GET_INPUT_CONTROL(x) ((x & 0x00000004) >> 2)
-
-static DEFINE_PER_CPU(unsigned long[NR_PHYS_CTRS], pmc_values);
-static unsigned long spu_pm_cnt[MAX_NUMNODES * NUM_SPUS_PER_NODE];
-static struct pmc_cntrl_data pmc_cntrl[NUM_THREADS][NR_PHYS_CTRS];
-
-/*
- * The CELL profiling code makes rtas calls to setup the debug bus to
- * route the performance signals.  Additionally, SPU profiling requires
- * a second rtas call to setup the hardware to capture the SPU PCs.
- * The EIO error value is returned if the token lookups or the rtas
- * call fail.  The EIO error number is the best choice of the existing
- * error numbers.  The probability of rtas related error is very low.  But
- * by returning EIO and printing additional information to dmsg the user
- * will know that OProfile did not start and dmesg will tell them why.
- * OProfile does not support returning errors on Stop.	Not a huge issue
- * since failure to reset the debug bus or stop the SPU PC collection is
- * not a fatel issue.  Chances are if the Stop failed, Start doesn't work
- * either.
- */
-
-/*
- * Interpetation of hdw_thread:
- * 0 - even virtual cpus 0, 2, 4,...
- * 1 - odd virtual cpus 1, 3, 5, ...
- *
- * FIXME: this is strictly wrong, we need to clean this up in a number
- * of places. It works for now. -arnd
- */
-static u32 hdw_thread;
-
-static u32 virt_cntr_inter_mask;
-static struct timer_list timer_virt_cntr;
-static struct timer_list timer_spu_event_swap;
-
-/*
- * pm_signal needs to be global since it is initialized in
- * cell_reg_setup at the time when the necessary information
- * is available.
- */
-static struct pm_signal pm_signal[NR_PHYS_CTRS];
-static int pm_rtas_token;    /* token for debug bus setup call */
-static int spu_rtas_token;   /* token for SPU cycle profiling */
-
-static u32 reset_value[NR_PHYS_CTRS];
-static int num_counters;
-static int oprofile_running;
-static DEFINE_SPINLOCK(cntr_lock);
-
-static u32 ctr_enabled;
-
-static unsigned char input_bus[NUM_INPUT_BUS_WORDS];
-
-/*
- * Firmware interface functions
- */
-static int
-rtas_ibm_cbe_perftools(int subfunc, int passthru,
-		       void *address, unsigned long length)
-{
-	u64 paddr = __pa(address);
-
-	return rtas_call(pm_rtas_token, 5, 1, NULL, subfunc,
-			 passthru, paddr >> 32, paddr & 0xffffffff, length);
-}
-
-static void pm_rtas_reset_signals(u32 node)
-{
-	int ret;
-	struct pm_signal pm_signal_local;
-
-	/*
-	 * The debug bus is being set to the passthru disable state.
-	 * However, the FW still expects at least one legal signal routing
-	 * entry or it will return an error on the arguments.	If we don't
-	 * supply a valid entry, we must ignore all return values.  Ignoring
-	 * all return values means we might miss an error we should be
-	 * concerned about.
-	 */
-
-	/*  fw expects physical cpu #. */
-	pm_signal_local.cpu = node;
-	pm_signal_local.signal_group = 21;
-	pm_signal_local.bus_word = 1;
-	pm_signal_local.sub_unit = 0;
-	pm_signal_local.bit = 0;
-
-	ret = rtas_ibm_cbe_perftools(SUBFUNC_RESET, PASSTHRU_DISABLE,
-				     &pm_signal_local,
-				     sizeof(struct pm_signal));
-
-	if (unlikely(ret))
-		/*
-		 * Not a fatal error. For Oprofile stop, the oprofile
-		 * functions do not support returning an error for
-		 * failure to stop OProfile.
-		 */
-		printk(KERN_WARNING "%s: rtas returned: %d\n",
-		       __func__, ret);
-}
-
-static int pm_rtas_activate_signals(u32 node, u32 count)
-{
-	int ret;
-	int i, j;
-	struct pm_signal pm_signal_local[NR_PHYS_CTRS];
-
-	/*
-	 * There is no debug setup required for the cycles event.
-	 * Note that only events in the same group can be used.
-	 * Otherwise, there will be conflicts in correctly routing
-	 * the signals on the debug bus.  It is the responsibility
-	 * of the OProfile user tool to check the events are in
-	 * the same group.
-	 */
-	i = 0;
-	for (j = 0; j < count; j++) {
-		if (pm_signal[j].signal_group != PPU_CYCLES_GRP_NUM) {
-
-			/* fw expects physical cpu # */
-			pm_signal_local[i].cpu = node;
-			pm_signal_local[i].signal_group
-				= pm_signal[j].signal_group;
-			pm_signal_local[i].bus_word = pm_signal[j].bus_word;
-			pm_signal_local[i].sub_unit = pm_signal[j].sub_unit;
-			pm_signal_local[i].bit = pm_signal[j].bit;
-			i++;
-		}
-	}
-
-	if (i != 0) {
-		ret = rtas_ibm_cbe_perftools(SUBFUNC_ACTIVATE, PASSTHRU_ENABLE,
-					     pm_signal_local,
-					     i * sizeof(struct pm_signal));
-
-		if (unlikely(ret)) {
-			printk(KERN_WARNING "%s: rtas returned: %d\n",
-			       __func__, ret);
-			return -EIO;
-		}
-	}
-
-	return 0;
-}
-
-/*
- * PM Signal functions
- */
-static void set_pm_event(u32 ctr, int event, u32 unit_mask)
-{
-	struct pm_signal *p;
-	u32 signal_bit;
-	u32 bus_word, bus_type, count_cycles, polarity, input_control;
-	int j, i;
-
-	if (event == PPU_CYCLES_EVENT_NUM) {
-		/* Special Event: Count all cpu cycles */
-		pm_regs.pm07_cntrl[ctr] = CBE_COUNT_ALL_CYCLES;
-		p = &(pm_signal[ctr]);
-		p->signal_group = PPU_CYCLES_GRP_NUM;
-		p->bus_word = 1;
-		p->sub_unit = 0;
-		p->bit = 0;
-		goto out;
-	} else {
-		pm_regs.pm07_cntrl[ctr] = 0;
-	}
-
-	bus_word = GET_BUS_WORD(unit_mask);
-	bus_type = GET_BUS_TYPE(unit_mask);
-	count_cycles = GET_COUNT_CYCLES(unit_mask);
-	polarity = GET_POLARITY(unit_mask);
-	input_control = GET_INPUT_CONTROL(unit_mask);
-	signal_bit = (event % 100);
-
-	p = &(pm_signal[ctr]);
-
-	p->signal_group = event / 100;
-	p->bus_word = bus_word;
-	p->sub_unit = GET_SUB_UNIT(unit_mask);
-
-	pm_regs.pm07_cntrl[ctr] = 0;
-	pm_regs.pm07_cntrl[ctr] |= PM07_CTR_COUNT_CYCLES(count_cycles);
-	pm_regs.pm07_cntrl[ctr] |= PM07_CTR_POLARITY(polarity);
-	pm_regs.pm07_cntrl[ctr] |= PM07_CTR_INPUT_CONTROL(input_control);
-
-	/*
-	 * Some of the islands signal selection is based on 64 bit words.
-	 * The debug bus words are 32 bits, the input words to the performance
-	 * counters are defined as 32 bits.  Need to convert the 64 bit island
-	 * specification to the appropriate 32 input bit and bus word for the
-	 * performance counter event selection.	 See the CELL Performance
-	 * monitoring signals manual and the Perf cntr hardware descriptions
-	 * for the details.
-	 */
-	if (input_control == 0) {
-		if (signal_bit > 31) {
-			signal_bit -= 32;
-			if (bus_word == 0x3)
-				bus_word = 0x2;
-			else if (bus_word == 0xc)
-				bus_word = 0x8;
-		}
-
-		if ((bus_type == 0) && p->signal_group >= 60)
-			bus_type = 2;
-		if ((bus_type == 1) && p->signal_group >= 50)
-			bus_type = 0;
-
-		pm_regs.pm07_cntrl[ctr] |= PM07_CTR_INPUT_MUX(signal_bit);
-	} else {
-		pm_regs.pm07_cntrl[ctr] = 0;
-		p->bit = signal_bit;
-	}
-
-	for (i = 0; i < NUM_DEBUG_BUS_WORDS; i++) {
-		if (bus_word & (1 << i)) {
-			pm_regs.debug_bus_control |=
-				(bus_type << (30 - (2 * i)));
-
-			for (j = 0; j < NUM_INPUT_BUS_WORDS; j++) {
-				if (input_bus[j] == 0xff) {
-					input_bus[j] = i;
-					pm_regs.group_control |=
-						(i << (30 - (2 * j)));
-
-					break;
-				}
-			}
-		}
-	}
-out:
-	;
-}
-
-static void write_pm_cntrl(int cpu)
-{
-	/*
-	 * Oprofile will use 32 bit counters, set bits 7:10 to 0
-	 * pmregs.pm_cntrl is a global
-	 */
-
-	u32 val = 0;
-	if (pm_regs.pm_cntrl.enable == 1)
-		val |= CBE_PM_ENABLE_PERF_MON;
-
-	if (pm_regs.pm_cntrl.stop_at_max == 1)
-		val |= CBE_PM_STOP_AT_MAX;
-
-	if (pm_regs.pm_cntrl.trace_mode != 0)
-		val |= CBE_PM_TRACE_MODE_SET(pm_regs.pm_cntrl.trace_mode);
-
-	if (pm_regs.pm_cntrl.trace_buf_ovflw == 1)
-		val |= CBE_PM_TRACE_BUF_OVFLW(pm_regs.pm_cntrl.trace_buf_ovflw);
-	if (pm_regs.pm_cntrl.freeze == 1)
-		val |= CBE_PM_FREEZE_ALL_CTRS;
-
-	val |= CBE_PM_SPU_ADDR_TRACE_SET(pm_regs.pm_cntrl.spu_addr_trace);
-
-	/*
-	 * Routine set_count_mode must be called previously to set
-	 * the count mode based on the user selection of user and kernel.
-	 */
-	val |= CBE_PM_COUNT_MODE_SET(pm_regs.pm_cntrl.count_mode);
-	cbe_write_pm(cpu, pm_control, val);
-}
-
-static inline void
-set_count_mode(u32 kernel, u32 user)
-{
-	/*
-	 * The user must specify user and kernel if they want them. If
-	 *  neither is specified, OProfile will count in hypervisor mode.
-	 *  pm_regs.pm_cntrl is a global
-	 */
-	if (kernel) {
-		if (user)
-			pm_regs.pm_cntrl.count_mode = CBE_COUNT_ALL_MODES;
-		else
-			pm_regs.pm_cntrl.count_mode =
-				CBE_COUNT_SUPERVISOR_MODE;
-	} else {
-		if (user)
-			pm_regs.pm_cntrl.count_mode = CBE_COUNT_PROBLEM_MODE;
-		else
-			pm_regs.pm_cntrl.count_mode =
-				CBE_COUNT_HYPERVISOR_MODE;
-	}
-}
-
-static inline void enable_ctr(u32 cpu, u32 ctr, u32 *pm07_cntrl)
-{
-
-	pm07_cntrl[ctr] |= CBE_PM_CTR_ENABLE;
-	cbe_write_pm07_control(cpu, ctr, pm07_cntrl[ctr]);
-}
-
-/*
- * Oprofile is expected to collect data on all CPUs simultaneously.
- * However, there is one set of performance counters per node.	There are
- * two hardware threads or virtual CPUs on each node.  Hence, OProfile must
- * multiplex in time the performance counter collection on the two virtual
- * CPUs.  The multiplexing of the performance counters is done by this
- * virtual counter routine.
- *
- * The pmc_values used below is defined as 'per-cpu' but its use is
- * more akin to 'per-node'.  We need to store two sets of counter
- * values per node -- one for the previous run and one for the next.
- * The per-cpu[NR_PHYS_CTRS] gives us the storage we need.  Each odd/even
- * pair of per-cpu arrays is used for storing the previous and next
- * pmc values for a given node.
- * NOTE: We use the per-cpu variable to improve cache performance.
- *
- * This routine will alternate loading the virtual counters for
- * virtual CPUs
- */
-static void cell_virtual_cntr(struct timer_list *unused)
-{
-	int i, prev_hdw_thread, next_hdw_thread;
-	u32 cpu;
-	unsigned long flags;
-
-	/*
-	 * Make sure that the interrupt_hander and the virt counter are
-	 * not both playing with the counters on the same node.
-	 */
-
-	spin_lock_irqsave(&cntr_lock, flags);
-
-	prev_hdw_thread = hdw_thread;
-
-	/* switch the cpu handling the interrupts */
-	hdw_thread = 1 ^ hdw_thread;
-	next_hdw_thread = hdw_thread;
-
-	pm_regs.group_control = 0;
-	pm_regs.debug_bus_control = 0;
-
-	for (i = 0; i < NUM_INPUT_BUS_WORDS; i++)
-		input_bus[i] = 0xff;
-
-	/*
-	 * There are some per thread events.  Must do the
-	 * set event, for the thread that is being started
-	 */
-	for (i = 0; i < num_counters; i++)
-		set_pm_event(i,
-			pmc_cntrl[next_hdw_thread][i].evnts,
-			pmc_cntrl[next_hdw_thread][i].masks);
-
-	/*
-	 * The following is done only once per each node, but
-	 * we need cpu #, not node #, to pass to the cbe_xxx functions.
-	 */
-	for_each_online_cpu(cpu) {
-		if (cbe_get_hw_thread_id(cpu))
-			continue;
-
-		/*
-		 * stop counters, save counter values, restore counts
-		 * for previous thread
-		 */
-		cbe_disable_pm(cpu);
-		cbe_disable_pm_interrupts(cpu);
-		for (i = 0; i < num_counters; i++) {
-			per_cpu(pmc_values, cpu + prev_hdw_thread)[i]
-				= cbe_read_ctr(cpu, i);
-
-			if (per_cpu(pmc_values, cpu + next_hdw_thread)[i]
-			    == 0xFFFFFFFF)
-				/* If the cntr value is 0xffffffff, we must
-				 * reset that to 0xfffffff0 when the current
-				 * thread is restarted.	 This will generate a
-				 * new interrupt and make sure that we never
-				 * restore the counters to the max value.  If
-				 * the counters were restored to the max value,
-				 * they do not increment and no interrupts are
-				 * generated.  Hence no more samples will be
-				 * collected on that cpu.
-				 */
-				cbe_write_ctr(cpu, i, 0xFFFFFFF0);
-			else
-				cbe_write_ctr(cpu, i,
-					      per_cpu(pmc_values,
-						      cpu +
-						      next_hdw_thread)[i]);
-		}
-
-		/*
-		 * Switch to the other thread. Change the interrupt
-		 * and control regs to be scheduled on the CPU
-		 * corresponding to the thread to execute.
-		 */
-		for (i = 0; i < num_counters; i++) {
-			if (pmc_cntrl[next_hdw_thread][i].enabled) {
-				/*
-				 * There are some per thread events.
-				 * Must do the set event, enable_cntr
-				 * for each cpu.
-				 */
-				enable_ctr(cpu, i,
-					   pm_regs.pm07_cntrl);
-			} else {
-				cbe_write_pm07_control(cpu, i, 0);
-			}
-		}
-
-		/* Enable interrupts on the CPU thread that is starting */
-		cbe_enable_pm_interrupts(cpu, next_hdw_thread,
-					 virt_cntr_inter_mask);
-		cbe_enable_pm(cpu);
-	}
-
-	spin_unlock_irqrestore(&cntr_lock, flags);
-
-	mod_timer(&timer_virt_cntr, jiffies + HZ / 10);
-}
-
-static void start_virt_cntrs(void)
-{
-	timer_setup(&timer_virt_cntr, cell_virtual_cntr, 0);
-	timer_virt_cntr.expires = jiffies + HZ / 10;
-	add_timer(&timer_virt_cntr);
-}
-
-static int cell_reg_setup_spu_cycles(struct op_counter_config *ctr,
-			struct op_system_config *sys, int num_ctrs)
-{
-	spu_cycle_reset = ctr[0].count;
-
-	/*
-	 * Each node will need to make the rtas call to start
-	 * and stop SPU profiling.  Get the token once and store it.
-	 */
-	spu_rtas_token = rtas_token("ibm,cbe-spu-perftools");
-
-	if (unlikely(spu_rtas_token == RTAS_UNKNOWN_SERVICE)) {
-		printk(KERN_ERR
-		       "%s: rtas token ibm,cbe-spu-perftools unknown\n",
-		       __func__);
-		return -EIO;
-	}
-	return 0;
-}
-
-/* Unfortunately, the hardware will only support event profiling
- * on one SPU per node at a time.  Therefore, we must time slice
- * the profiling across all SPUs in the node.  Note, we do this
- * in parallel for each node.  The following routine is called
- * periodically based on kernel timer to switch which SPU is
- * being monitored in a round robbin fashion.
- */
-static void spu_evnt_swap(struct timer_list *unused)
-{
-	int node;
-	int cur_phys_spu, nxt_phys_spu, cur_spu_evnt_phys_spu_indx;
-	unsigned long flags;
-	int cpu;
-	int ret;
-	u32 interrupt_mask;
-
-
-	/* enable interrupts on cntr 0 */
-	interrupt_mask = CBE_PM_CTR_OVERFLOW_INTR(0);
-
-	hdw_thread = 0;
-
-	/* Make sure spu event interrupt handler and spu event swap
-	 * don't access the counters simultaneously.
-	 */
-	spin_lock_irqsave(&cntr_lock, flags);
-
-	cur_spu_evnt_phys_spu_indx = spu_evnt_phys_spu_indx;
-
-	if (++(spu_evnt_phys_spu_indx) == NUM_SPUS_PER_NODE)
-		spu_evnt_phys_spu_indx = 0;
-
-	pm_signal[0].sub_unit = spu_evnt_phys_spu_indx;
-	pm_signal[1].sub_unit = spu_evnt_phys_spu_indx;
-	pm_signal[2].sub_unit = spu_evnt_phys_spu_indx;
-
-	/* switch the SPU being profiled on each node */
-	for_each_online_cpu(cpu) {
-		if (cbe_get_hw_thread_id(cpu))
-			continue;
-
-		node = cbe_cpu_to_node(cpu);
-		cur_phys_spu = (node * NUM_SPUS_PER_NODE)
-			+ cur_spu_evnt_phys_spu_indx;
-		nxt_phys_spu = (node * NUM_SPUS_PER_NODE)
-			+ spu_evnt_phys_spu_indx;
-
-		/*
-		 * stop counters, save counter values, restore counts
-		 * for previous physical SPU
-		 */
-		cbe_disable_pm(cpu);
-		cbe_disable_pm_interrupts(cpu);
-
-		spu_pm_cnt[cur_phys_spu]
-			= cbe_read_ctr(cpu, 0);
-
-		/* restore previous count for the next spu to sample */
-		/* NOTE, hardware issue, counter will not start if the
-		 * counter value is at max (0xFFFFFFFF).
-		 */
-		if (spu_pm_cnt[nxt_phys_spu] >= 0xFFFFFFFF)
-			cbe_write_ctr(cpu, 0, 0xFFFFFFF0);
-		 else
-			 cbe_write_ctr(cpu, 0, spu_pm_cnt[nxt_phys_spu]);
-
-		pm_rtas_reset_signals(cbe_cpu_to_node(cpu));
-
-		/* setup the debug bus measure the one event and
-		 * the two events to route the next SPU's PC on
-		 * the debug bus
-		 */
-		ret = pm_rtas_activate_signals(cbe_cpu_to_node(cpu), 3);
-		if (ret)
-			printk(KERN_ERR "%s: pm_rtas_activate_signals failed, "
-			       "SPU event swap\n", __func__);
-
-		/* clear the trace buffer, don't want to take PC for
-		 * previous SPU*/
-		cbe_write_pm(cpu, trace_address, 0);
-
-		enable_ctr(cpu, 0, pm_regs.pm07_cntrl);
-
-		/* Enable interrupts on the CPU thread that is starting */
-		cbe_enable_pm_interrupts(cpu, hdw_thread,
-					 interrupt_mask);
-		cbe_enable_pm(cpu);
-	}
-
-	spin_unlock_irqrestore(&cntr_lock, flags);
-
-	/* swap approximately every 0.1 seconds */
-	mod_timer(&timer_spu_event_swap, jiffies + HZ / 25);
-}
-
-static void start_spu_event_swap(void)
-{
-	timer_setup(&timer_spu_event_swap, spu_evnt_swap, 0);
-	timer_spu_event_swap.expires = jiffies + HZ / 25;
-	add_timer(&timer_spu_event_swap);
-}
-
-static int cell_reg_setup_spu_events(struct op_counter_config *ctr,
-			struct op_system_config *sys, int num_ctrs)
-{
-	int i;
-
-	/* routine is called once for all nodes */
-
-	spu_evnt_phys_spu_indx = 0;
-	/*
-	 * For all events except PPU CYCLEs, each node will need to make
-	 * the rtas cbe-perftools call to setup and reset the debug bus.
-	 * Make the token lookup call once and store it in the global
-	 * variable pm_rtas_token.
-	 */
-	pm_rtas_token = rtas_token("ibm,cbe-perftools");
-
-	if (unlikely(pm_rtas_token == RTAS_UNKNOWN_SERVICE)) {
-		printk(KERN_ERR
-		       "%s: rtas token ibm,cbe-perftools unknown\n",
-		       __func__);
-		return -EIO;
-	}
-
-	/* setup the pm_control register settings,
-	 * settings will be written per node by the
-	 * cell_cpu_setup() function.
-	 */
-	pm_regs.pm_cntrl.trace_buf_ovflw = 1;
-
-	/* Use the occurrence trace mode to have SPU PC saved
-	 * to the trace buffer.  Occurrence data in trace buffer
-	 * is not used.  Bit 2 must be set to store SPU addresses.
-	 */
-	pm_regs.pm_cntrl.trace_mode = 2;
-
-	pm_regs.pm_cntrl.spu_addr_trace = 0x1;  /* using debug bus
-						   event 2 & 3 */
-
-	/* setup the debug bus event array with the SPU PC routing events.
-	*  Note, pm_signal[0] will be filled in by set_pm_event() call below.
-	*/
-	pm_signal[1].signal_group = SPU_PROFILE_EVENT_ADDR / 100;
-	pm_signal[1].bus_word = GET_BUS_WORD(SPU_PROFILE_EVENT_ADDR_MASK_A);
-	pm_signal[1].bit = SPU_PROFILE_EVENT_ADDR % 100;
-	pm_signal[1].sub_unit = spu_evnt_phys_spu_indx;
-
-	pm_signal[2].signal_group = SPU_PROFILE_EVENT_ADDR / 100;
-	pm_signal[2].bus_word = GET_BUS_WORD(SPU_PROFILE_EVENT_ADDR_MASK_B);
-	pm_signal[2].bit = SPU_PROFILE_EVENT_ADDR % 100;
-	pm_signal[2].sub_unit = spu_evnt_phys_spu_indx;
-
-	/* Set the user selected spu event to profile on,
-	 * note, only one SPU profiling event is supported
-	 */
-	num_counters = 1;  /* Only support one SPU event at a time */
-	set_pm_event(0, ctr[0].event, ctr[0].unit_mask);
-
-	reset_value[0] = 0xFFFFFFFF - ctr[0].count;
-
-	/* global, used by cell_cpu_setup */
-	ctr_enabled |= 1;
-
-	/* Initialize the count for each SPU to the reset value */
-	for (i=0; i < MAX_NUMNODES * NUM_SPUS_PER_NODE; i++)
-		spu_pm_cnt[i] = reset_value[0];
-
-	return 0;
-}
-
-static int cell_reg_setup_ppu(struct op_counter_config *ctr,
-			struct op_system_config *sys, int num_ctrs)
-{
-	/* routine is called once for all nodes */
-	int i, j, cpu;
-
-	num_counters = num_ctrs;
-
-	if (unlikely(num_ctrs > NR_PHYS_CTRS)) {
-		printk(KERN_ERR
-		       "%s: Oprofile, number of specified events " \
-		       "exceeds number of physical counters\n",
-		       __func__);
-		return -EIO;
-	}
-
-	set_count_mode(sys->enable_kernel, sys->enable_user);
-
-	/* Setup the thread 0 events */
-	for (i = 0; i < num_ctrs; ++i) {
-
-		pmc_cntrl[0][i].evnts = ctr[i].event;
-		pmc_cntrl[0][i].masks = ctr[i].unit_mask;
-		pmc_cntrl[0][i].enabled = ctr[i].enabled;
-		pmc_cntrl[0][i].vcntr = i;
-
-		for_each_possible_cpu(j)
-			per_cpu(pmc_values, j)[i] = 0;
-	}
-
-	/*
-	 * Setup the thread 1 events, map the thread 0 event to the
-	 * equivalent thread 1 event.
-	 */
-	for (i = 0; i < num_ctrs; ++i) {
-		if ((ctr[i].event >= 2100) && (ctr[i].event <= 2111))
-			pmc_cntrl[1][i].evnts = ctr[i].event + 19;
-		else if (ctr[i].event == 2203)
-			pmc_cntrl[1][i].evnts = ctr[i].event;
-		else if ((ctr[i].event >= 2200) && (ctr[i].event <= 2215))
-			pmc_cntrl[1][i].evnts = ctr[i].event + 16;
-		else
-			pmc_cntrl[1][i].evnts = ctr[i].event;
-
-		pmc_cntrl[1][i].masks = ctr[i].unit_mask;
-		pmc_cntrl[1][i].enabled = ctr[i].enabled;
-		pmc_cntrl[1][i].vcntr = i;
-	}
-
-	for (i = 0; i < NUM_INPUT_BUS_WORDS; i++)
-		input_bus[i] = 0xff;
-
-	/*
-	 * Our counters count up, and "count" refers to
-	 * how much before the next interrupt, and we interrupt
-	 * on overflow.	 So we calculate the starting value
-	 * which will give us "count" until overflow.
-	 * Then we set the events on the enabled counters.
-	 */
-	for (i = 0; i < num_counters; ++i) {
-		/* start with virtual counter set 0 */
-		if (pmc_cntrl[0][i].enabled) {
-			/* Using 32bit counters, reset max - count */
-			reset_value[i] = 0xFFFFFFFF - ctr[i].count;
-			set_pm_event(i,
-				     pmc_cntrl[0][i].evnts,
-				     pmc_cntrl[0][i].masks);
-
-			/* global, used by cell_cpu_setup */
-			ctr_enabled |= (1 << i);
-		}
-	}
-
-	/* initialize the previous counts for the virtual cntrs */
-	for_each_online_cpu(cpu)
-		for (i = 0; i < num_counters; ++i) {
-			per_cpu(pmc_values, cpu)[i] = reset_value[i];
-		}
-
-	return 0;
-}
-
-
-/* This function is called once for all cpus combined */
-static int cell_reg_setup(struct op_counter_config *ctr,
-			struct op_system_config *sys, int num_ctrs)
-{
-	int ret=0;
-	spu_cycle_reset = 0;
-
-	/* initialize the spu_arr_trace value, will be reset if
-	 * doing spu event profiling.
-	 */
-	pm_regs.group_control = 0;
-	pm_regs.debug_bus_control = 0;
-	pm_regs.pm_cntrl.stop_at_max = 1;
-	pm_regs.pm_cntrl.trace_mode = 0;
-	pm_regs.pm_cntrl.freeze = 1;
-	pm_regs.pm_cntrl.trace_buf_ovflw = 0;
-	pm_regs.pm_cntrl.spu_addr_trace = 0;
-
-	/*
-	 * For all events except PPU CYCLEs, each node will need to make
-	 * the rtas cbe-perftools call to setup and reset the debug bus.
-	 * Make the token lookup call once and store it in the global
-	 * variable pm_rtas_token.
-	 */
-	pm_rtas_token = rtas_token("ibm,cbe-perftools");
-
-	if (unlikely(pm_rtas_token == RTAS_UNKNOWN_SERVICE)) {
-		printk(KERN_ERR
-		       "%s: rtas token ibm,cbe-perftools unknown\n",
-		       __func__);
-		return -EIO;
-	}
-
-	if (ctr[0].event == SPU_CYCLES_EVENT_NUM) {
-		profiling_mode = SPU_PROFILING_CYCLES;
-		ret = cell_reg_setup_spu_cycles(ctr, sys, num_ctrs);
-	} else if ((ctr[0].event >= SPU_EVENT_NUM_START) &&
-		   (ctr[0].event <= SPU_EVENT_NUM_STOP)) {
-		profiling_mode = SPU_PROFILING_EVENTS;
-		spu_cycle_reset = ctr[0].count;
-
-		/* for SPU event profiling, need to setup the
-		 * pm_signal array with the events to route the
-		 * SPU PC before making the FW call.  Note, only
-		 * one SPU event for profiling can be specified
-		 * at a time.
-		 */
-		cell_reg_setup_spu_events(ctr, sys, num_ctrs);
-	} else {
-		profiling_mode = PPU_PROFILING;
-		ret = cell_reg_setup_ppu(ctr, sys, num_ctrs);
-	}
-
-	return ret;
-}
-
-
-
-/* This function is called once for each cpu */
-static int cell_cpu_setup(struct op_counter_config *cntr)
-{
-	u32 cpu = smp_processor_id();
-	u32 num_enabled = 0;
-	int i;
-	int ret;
-
-	/* Cycle based SPU profiling does not use the performance
-	 * counters.  The trace array is configured to collect
-	 * the data.
-	 */
-	if (profiling_mode == SPU_PROFILING_CYCLES)
-		return 0;
-
-	/* There is one performance monitor per processor chip (i.e. node),
-	 * so we only need to perform this function once per node.
-	 */
-	if (cbe_get_hw_thread_id(cpu))
-		return 0;
-
-	/* Stop all counters */
-	cbe_disable_pm(cpu);
-	cbe_disable_pm_interrupts(cpu);
-
-	cbe_write_pm(cpu, pm_start_stop, 0);
-	cbe_write_pm(cpu, group_control, pm_regs.group_control);
-	cbe_write_pm(cpu, debug_bus_control, pm_regs.debug_bus_control);
-	write_pm_cntrl(cpu);
-
-	for (i = 0; i < num_counters; ++i) {
-		if (ctr_enabled & (1 << i)) {
-			pm_signal[num_enabled].cpu = cbe_cpu_to_node(cpu);
-			num_enabled++;
-		}
-	}
-
-	/*
-	 * The pm_rtas_activate_signals will return -EIO if the FW
-	 * call failed.
-	 */
-	if (profiling_mode == SPU_PROFILING_EVENTS) {
-		/* For SPU event profiling also need to setup the
-		 * pm interval timer
-		 */
-		ret = pm_rtas_activate_signals(cbe_cpu_to_node(cpu),
-					       num_enabled+2);
-		/* store PC from debug bus to Trace buffer as often
-		 * as possible (every 10 cycles)
-		 */
-		cbe_write_pm(cpu, pm_interval, NUM_INTERVAL_CYC);
-		return ret;
-	} else
-		return pm_rtas_activate_signals(cbe_cpu_to_node(cpu),
-						num_enabled);
-}
-
-#define ENTRIES	 303
-#define MAXLFSR	 0xFFFFFF
-
-/* precomputed table of 24 bit LFSR values */
-static int initial_lfsr[] = {
- 8221349, 12579195, 5379618, 10097839, 7512963, 7519310, 3955098, 10753424,
- 15507573, 7458917, 285419, 2641121, 9780088, 3915503, 6668768, 1548716,
- 4885000, 8774424, 9650099, 2044357, 2304411, 9326253, 10332526, 4421547,
- 3440748, 10179459, 13332843, 10375561, 1313462, 8375100, 5198480, 6071392,
- 9341783, 1526887, 3985002, 1439429, 13923762, 7010104, 11969769, 4547026,
- 2040072, 4025602, 3437678, 7939992, 11444177, 4496094, 9803157, 10745556,
- 3671780, 4257846, 5662259, 13196905, 3237343, 12077182, 16222879, 7587769,
- 14706824, 2184640, 12591135, 10420257, 7406075, 3648978, 11042541, 15906893,
- 11914928, 4732944, 10695697, 12928164, 11980531, 4430912, 11939291, 2917017,
- 6119256, 4172004, 9373765, 8410071, 14788383, 5047459, 5474428, 1737756,
- 15967514, 13351758, 6691285, 8034329, 2856544, 14394753, 11310160, 12149558,
- 7487528, 7542781, 15668898, 12525138, 12790975, 3707933, 9106617, 1965401,
- 16219109, 12801644, 2443203, 4909502, 8762329, 3120803, 6360315, 9309720,
- 15164599, 10844842, 4456529, 6667610, 14924259, 884312, 6234963, 3326042,
- 15973422, 13919464, 5272099, 6414643, 3909029, 2764324, 5237926, 4774955,
- 10445906, 4955302, 5203726, 10798229, 11443419, 2303395, 333836, 9646934,
- 3464726, 4159182, 568492, 995747, 10318756, 13299332, 4836017, 8237783,
- 3878992, 2581665, 11394667, 5672745, 14412947, 3159169, 9094251, 16467278,
- 8671392, 15230076, 4843545, 7009238, 15504095, 1494895, 9627886, 14485051,
- 8304291, 252817, 12421642, 16085736, 4774072, 2456177, 4160695, 15409741,
- 4902868, 5793091, 13162925, 16039714, 782255, 11347835, 14884586, 366972,
- 16308990, 11913488, 13390465, 2958444, 10340278, 1177858, 1319431, 10426302,
- 2868597, 126119, 5784857, 5245324, 10903900, 16436004, 3389013, 1742384,
- 14674502, 10279218, 8536112, 10364279, 6877778, 14051163, 1025130, 6072469,
- 1988305, 8354440, 8216060, 16342977, 13112639, 3976679, 5913576, 8816697,
- 6879995, 14043764, 3339515, 9364420, 15808858, 12261651, 2141560, 5636398,
- 10345425, 10414756, 781725, 6155650, 4746914, 5078683, 7469001, 6799140,
- 10156444, 9667150, 10116470, 4133858, 2121972, 1124204, 1003577, 1611214,
- 14304602, 16221850, 13878465, 13577744, 3629235, 8772583, 10881308, 2410386,
- 7300044, 5378855, 9301235, 12755149, 4977682, 8083074, 10327581, 6395087,
- 9155434, 15501696, 7514362, 14520507, 15808945, 3244584, 4741962, 9658130,
- 14336147, 8654727, 7969093, 15759799, 14029445, 5038459, 9894848, 8659300,
- 13699287, 8834306, 10712885, 14753895, 10410465, 3373251, 309501, 9561475,
- 5526688, 14647426, 14209836, 5339224, 207299, 14069911, 8722990, 2290950,
- 3258216, 12505185, 6007317, 9218111, 14661019, 10537428, 11731949, 9027003,
- 6641507, 9490160, 200241, 9720425, 16277895, 10816638, 1554761, 10431375,
- 7467528, 6790302, 3429078, 14633753, 14428997, 11463204, 3576212, 2003426,
- 6123687, 820520, 9992513, 15784513, 5778891, 6428165, 8388607
-};
-
-/*
- * The hardware uses an LFSR counting sequence to determine when to capture
- * the SPU PCs.	 An LFSR sequence is like a puesdo random number sequence
- * where each number occurs once in the sequence but the sequence is not in
- * numerical order. The SPU PC capture is done when the LFSR sequence reaches
- * the last value in the sequence.  Hence the user specified value N
- * corresponds to the LFSR number that is N from the end of the sequence.
- *
- * To avoid the time to compute the LFSR, a lookup table is used.  The 24 bit
- * LFSR sequence is broken into four ranges.  The spacing of the precomputed
- * values is adjusted in each range so the error between the user specified
- * number (N) of events between samples and the actual number of events based
- * on the precomputed value will be les then about 6.2%.  Note, if the user
- * specifies N < 2^16, the LFSR value that is 2^16 from the end will be used.
- * This is to prevent the loss of samples because the trace buffer is full.
- *
- *	   User specified N		     Step between	   Index in
- *					 precomputed values	 precomputed
- *								    table
- * 0		    to	2^16-1			----		      0
- * 2^16	    to	2^16+2^19-1		2^12		    1 to 128
- * 2^16+2^19	    to	2^16+2^19+2^22-1	2^15		  129 to 256
- * 2^16+2^19+2^22  to	2^24-1			2^18		  257 to 302
- *
- *
- * For example, the LFSR values in the second range are computed for 2^16,
- * 2^16+2^12, ... , 2^19-2^16, 2^19 and stored in the table at indicies
- * 1, 2,..., 127, 128.
- *
- * The 24 bit LFSR value for the nth number in the sequence can be
- * calculated using the following code:
- *
- * #define size 24
- * int calculate_lfsr(int n)
- * {
- *	int i;
- *	unsigned int newlfsr0;
- *	unsigned int lfsr = 0xFFFFFF;
- *	unsigned int howmany = n;
- *
- *	for (i = 2; i < howmany + 2; i++) {
- *		newlfsr0 = (((lfsr >> (size - 1 - 0)) & 1) ^
- *		((lfsr >> (size - 1 - 1)) & 1) ^
- *		(((lfsr >> (size - 1 - 6)) & 1) ^
- *		((lfsr >> (size - 1 - 23)) & 1)));
- *
- *		lfsr >>= 1;
- *		lfsr = lfsr | (newlfsr0 << (size - 1));
- *	}
- *	return lfsr;
- * }
- */
-
-#define V2_16  (0x1 << 16)
-#define V2_19  (0x1 << 19)
-#define V2_22  (0x1 << 22)
-
-static int calculate_lfsr(int n)
-{
-	/*
-	 * The ranges and steps are in powers of 2 so the calculations
-	 * can be done using shifts rather then divide.
-	 */
-	int index;
-
-	if ((n >> 16) == 0)
-		index = 0;
-	else if (((n - V2_16) >> 19) == 0)
-		index = ((n - V2_16) >> 12) + 1;
-	else if (((n - V2_16 - V2_19) >> 22) == 0)
-		index = ((n - V2_16 - V2_19) >> 15 ) + 1 + 128;
-	else if (((n - V2_16 - V2_19 - V2_22) >> 24) == 0)
-		index = ((n - V2_16 - V2_19 - V2_22) >> 18 ) + 1 + 256;
-	else
-		index = ENTRIES-1;
-
-	/* make sure index is valid */
-	if ((index >= ENTRIES) || (index < 0))
-		index = ENTRIES-1;
-
-	return initial_lfsr[index];
-}
-
-static int pm_rtas_activate_spu_profiling(u32 node)
-{
-	int ret, i;
-	struct pm_signal pm_signal_local[NUM_SPUS_PER_NODE];
-
-	/*
-	 * Set up the rtas call to configure the debug bus to
-	 * route the SPU PCs.  Setup the pm_signal for each SPU
-	 */
-	for (i = 0; i < ARRAY_SIZE(pm_signal_local); i++) {
-		pm_signal_local[i].cpu = node;
-		pm_signal_local[i].signal_group = 41;
-		/* spu i on word (i/2) */
-		pm_signal_local[i].bus_word = 1 << i / 2;
-		/* spu i */
-		pm_signal_local[i].sub_unit = i;
-		pm_signal_local[i].bit = 63;
-	}
-
-	ret = rtas_ibm_cbe_perftools(SUBFUNC_ACTIVATE,
-				     PASSTHRU_ENABLE, pm_signal_local,
-				     (ARRAY_SIZE(pm_signal_local)
-				      * sizeof(struct pm_signal)));
-
-	if (unlikely(ret)) {
-		printk(KERN_WARNING "%s: rtas returned: %d\n",
-		       __func__, ret);
-		return -EIO;
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_CPU_FREQ
-static int
-oprof_cpufreq_notify(struct notifier_block *nb, unsigned long val, void *data)
-{
-	int ret = 0;
-	struct cpufreq_freqs *frq = data;
-	if ((val == CPUFREQ_PRECHANGE && frq->old < frq->new) ||
-	    (val == CPUFREQ_POSTCHANGE && frq->old > frq->new))
-		set_spu_profiling_frequency(frq->new, spu_cycle_reset);
-	return ret;
-}
-
-static struct notifier_block cpu_freq_notifier_block = {
-	.notifier_call	= oprof_cpufreq_notify
-};
-#endif
-
-/*
- * Note the generic OProfile stop calls do not support returning
- * an error on stop.  Hence, will not return an error if the FW
- * calls fail on stop.	Failure to reset the debug bus is not an issue.
- * Failure to disable the SPU profiling is not an issue.  The FW calls
- * to enable the performance counters and debug bus will work even if
- * the hardware was not cleanly reset.
- */
-static void cell_global_stop_spu_cycles(void)
-{
-	int subfunc, rtn_value;
-	unsigned int lfsr_value;
-	int cpu;
-
-	oprofile_running = 0;
-	smp_wmb();
-
-#ifdef CONFIG_CPU_FREQ
-	cpufreq_unregister_notifier(&cpu_freq_notifier_block,
-				    CPUFREQ_TRANSITION_NOTIFIER);
-#endif
-
-	for_each_online_cpu(cpu) {
-		if (cbe_get_hw_thread_id(cpu))
-			continue;
-
-		subfunc = 3;	/*
-				 * 2 - activate SPU tracing,
-				 * 3 - deactivate
-				 */
-		lfsr_value = 0x8f100000;
-
-		rtn_value = rtas_call(spu_rtas_token, 3, 1, NULL,
-				      subfunc, cbe_cpu_to_node(cpu),
-				      lfsr_value);
-
-		if (unlikely(rtn_value != 0)) {
-			printk(KERN_ERR
-			       "%s: rtas call ibm,cbe-spu-perftools " \
-			       "failed, return = %d\n",
-			       __func__, rtn_value);
-		}
-
-		/* Deactivate the signals */
-		pm_rtas_reset_signals(cbe_cpu_to_node(cpu));
-	}
-
-	stop_spu_profiling_cycles();
-}
-
-static void cell_global_stop_spu_events(void)
-{
-	int cpu;
-	oprofile_running = 0;
-
-	stop_spu_profiling_events();
-	smp_wmb();
-
-	for_each_online_cpu(cpu) {
-		if (cbe_get_hw_thread_id(cpu))
-			continue;
-
-		cbe_sync_irq(cbe_cpu_to_node(cpu));
-		/* Stop the counters */
-		cbe_disable_pm(cpu);
-		cbe_write_pm07_control(cpu, 0, 0);
-
-		/* Deactivate the signals */
-		pm_rtas_reset_signals(cbe_cpu_to_node(cpu));
-
-		/* Deactivate interrupts */
-		cbe_disable_pm_interrupts(cpu);
-	}
-	del_timer_sync(&timer_spu_event_swap);
-}
-
-static void cell_global_stop_ppu(void)
-{
-	int cpu;
-
-	/*
-	 * This routine will be called once for the system.
-	 * There is one performance monitor per node, so we
-	 * only need to perform this function once per node.
-	 */
-	del_timer_sync(&timer_virt_cntr);
-	oprofile_running = 0;
-	smp_wmb();
-
-	for_each_online_cpu(cpu) {
-		if (cbe_get_hw_thread_id(cpu))
-			continue;
-
-		cbe_sync_irq(cbe_cpu_to_node(cpu));
-		/* Stop the counters */
-		cbe_disable_pm(cpu);
-
-		/* Deactivate the signals */
-		pm_rtas_reset_signals(cbe_cpu_to_node(cpu));
-
-		/* Deactivate interrupts */
-		cbe_disable_pm_interrupts(cpu);
-	}
-}
-
-static void cell_global_stop(void)
-{
-	if (profiling_mode == PPU_PROFILING)
-		cell_global_stop_ppu();
-	else if (profiling_mode == SPU_PROFILING_EVENTS)
-		cell_global_stop_spu_events();
-	else
-		cell_global_stop_spu_cycles();
-}
-
-static int cell_global_start_spu_cycles(struct op_counter_config *ctr)
-{
-	int subfunc;
-	unsigned int lfsr_value;
-	int cpu;
-	int ret;
-	int rtas_error;
-	unsigned int cpu_khzfreq = 0;
-
-	/* The SPU profiling uses time-based profiling based on
-	 * cpu frequency, so if configured with the CPU_FREQ
-	 * option, we should detect frequency changes and react
-	 * accordingly.
-	 */
-#ifdef CONFIG_CPU_FREQ
-	ret = cpufreq_register_notifier(&cpu_freq_notifier_block,
-					CPUFREQ_TRANSITION_NOTIFIER);
-	if (ret < 0)
-		/* this is not a fatal error */
-		printk(KERN_ERR "CPU freq change registration failed: %d\n",
-		       ret);
-
-	else
-		cpu_khzfreq = cpufreq_quick_get(smp_processor_id());
-#endif
-
-	set_spu_profiling_frequency(cpu_khzfreq, spu_cycle_reset);
-
-	for_each_online_cpu(cpu) {
-		if (cbe_get_hw_thread_id(cpu))
-			continue;
-
-		/*
-		 * Setup SPU cycle-based profiling.
-		 * Set perf_mon_control bit 0 to a zero before
-		 * enabling spu collection hardware.
-		 */
-		cbe_write_pm(cpu, pm_control, 0);
-
-		if (spu_cycle_reset > MAX_SPU_COUNT)
-			/* use largest possible value */
-			lfsr_value = calculate_lfsr(MAX_SPU_COUNT-1);
-		else
-			lfsr_value = calculate_lfsr(spu_cycle_reset);
-
-		/* must use a non zero value. Zero disables data collection. */
-		if (lfsr_value == 0)
-			lfsr_value = calculate_lfsr(1);
-
-		lfsr_value = lfsr_value << 8; /* shift lfsr to correct
-						* register location
-						*/
-
-		/* debug bus setup */
-		ret = pm_rtas_activate_spu_profiling(cbe_cpu_to_node(cpu));
-
-		if (unlikely(ret)) {
-			rtas_error = ret;
-			goto out;
-		}
-
-
-		subfunc = 2;	/* 2 - activate SPU tracing, 3 - deactivate */
-
-		/* start profiling */
-		ret = rtas_call(spu_rtas_token, 3, 1, NULL, subfunc,
-				cbe_cpu_to_node(cpu), lfsr_value);
-
-		if (unlikely(ret != 0)) {
-			printk(KERN_ERR
-			       "%s: rtas call ibm,cbe-spu-perftools failed, " \
-			       "return = %d\n", __func__, ret);
-			rtas_error = -EIO;
-			goto out;
-		}
-	}
-
-	rtas_error = start_spu_profiling_cycles(spu_cycle_reset);
-	if (rtas_error)
-		goto out_stop;
-
-	oprofile_running = 1;
-	return 0;
-
-out_stop:
-	cell_global_stop_spu_cycles();	/* clean up the PMU/debug bus */
-out:
-	return rtas_error;
-}
-
-static int cell_global_start_spu_events(struct op_counter_config *ctr)
-{
-	int cpu;
-	u32 interrupt_mask = 0;
-	int rtn = 0;
-
-	hdw_thread = 0;
-
-	/* spu event profiling, uses the performance counters to generate
-	 * an interrupt.  The hardware is setup to store the SPU program
-	 * counter into the trace array.  The occurrence mode is used to
-	 * enable storing data to the trace buffer.  The bits are set
-	 * to send/store the SPU address in the trace buffer.  The debug
-	 * bus must be setup to route the SPU program counter onto the
-	 * debug bus.  The occurrence data in the trace buffer is not used.
-	 */
-
-	/* This routine gets called once for the system.
-	 * There is one performance monitor per node, so we
-	 * only need to perform this function once per node.
-	 */
-
-	for_each_online_cpu(cpu) {
-		if (cbe_get_hw_thread_id(cpu))
-			continue;
-
-		/*
-		 * Setup SPU event-based profiling.
-		 * Set perf_mon_control bit 0 to a zero before
-		 * enabling spu collection hardware.
-		 *
-		 * Only support one SPU event on one SPU per node.
-		 */
-		if (ctr_enabled & 1) {
-			cbe_write_ctr(cpu, 0, reset_value[0]);
-			enable_ctr(cpu, 0, pm_regs.pm07_cntrl);
-			interrupt_mask |=
-				CBE_PM_CTR_OVERFLOW_INTR(0);
-		} else {
-			/* Disable counter */
-			cbe_write_pm07_control(cpu, 0, 0);
-		}
-
-		cbe_get_and_clear_pm_interrupts(cpu);
-		cbe_enable_pm_interrupts(cpu, hdw_thread, interrupt_mask);
-		cbe_enable_pm(cpu);
-
-		/* clear the trace buffer */
-		cbe_write_pm(cpu, trace_address, 0);
-	}
-
-	/* Start the timer to time slice collecting the event profile
-	 * on each of the SPUs.  Note, can collect profile on one SPU
-	 * per node at a time.
-	 */
-	start_spu_event_swap();
-	start_spu_profiling_events();
-	oprofile_running = 1;
-	smp_wmb();
-
-	return rtn;
-}
-
-static int cell_global_start_ppu(struct op_counter_config *ctr)
-{
-	u32 cpu, i;
-	u32 interrupt_mask = 0;
-
-	/* This routine gets called once for the system.
-	 * There is one performance monitor per node, so we
-	 * only need to perform this function once per node.
-	 */
-	for_each_online_cpu(cpu) {
-		if (cbe_get_hw_thread_id(cpu))
-			continue;
-
-		interrupt_mask = 0;
-
-		for (i = 0; i < num_counters; ++i) {
-			if (ctr_enabled & (1 << i)) {
-				cbe_write_ctr(cpu, i, reset_value[i]);
-				enable_ctr(cpu, i, pm_regs.pm07_cntrl);
-				interrupt_mask |= CBE_PM_CTR_OVERFLOW_INTR(i);
-			} else {
-				/* Disable counter */
-				cbe_write_pm07_control(cpu, i, 0);
-			}
-		}
-
-		cbe_get_and_clear_pm_interrupts(cpu);
-		cbe_enable_pm_interrupts(cpu, hdw_thread, interrupt_mask);
-		cbe_enable_pm(cpu);
-	}
-
-	virt_cntr_inter_mask = interrupt_mask;
-	oprofile_running = 1;
-	smp_wmb();
-
-	/*
-	 * NOTE: start_virt_cntrs will result in cell_virtual_cntr() being
-	 * executed which manipulates the PMU.	We start the "virtual counter"
-	 * here so that we do not need to synchronize access to the PMU in
-	 * the above for-loop.
-	 */
-	start_virt_cntrs();
-
-	return 0;
-}
-
-static int cell_global_start(struct op_counter_config *ctr)
-{
-	if (profiling_mode == SPU_PROFILING_CYCLES)
-		return cell_global_start_spu_cycles(ctr);
-	else if (profiling_mode == SPU_PROFILING_EVENTS)
-		return cell_global_start_spu_events(ctr);
-	else
-		return cell_global_start_ppu(ctr);
-}
-
-
-/* The SPU interrupt handler
- *
- * SPU event profiling works as follows:
- * The pm_signal[0] holds the one SPU event to be measured.  It is routed on
- * the debug bus using word 0 or 1.  The value of pm_signal[1] and
- * pm_signal[2] contain the necessary events to route the SPU program
- * counter for the selected SPU onto the debug bus using words 2 and 3.
- * The pm_interval register is setup to write the SPU PC value into the
- * trace buffer at the maximum rate possible.  The trace buffer is configured
- * to store the PCs, wrapping when it is full.  The performance counter is
- * initialized to the max hardware count minus the number of events, N, between
- * samples.  Once the N events have occurred, a HW counter overflow occurs
- * causing the generation of a HW counter interrupt which also stops the
- * writing of the SPU PC values to the trace buffer.  Hence the last PC
- * written to the trace buffer is the SPU PC that we want.  Unfortunately,
- * we have to read from the beginning of the trace buffer to get to the
- * last value written.  We just hope the PPU has nothing better to do then
- * service this interrupt. The PC for the specific SPU being profiled is
- * extracted from the trace buffer processed and stored.  The trace buffer
- * is cleared, interrupts are cleared, the counter is reset to max - N.
- * A kernel timer is used to periodically call the routine spu_evnt_swap()
- * to switch to the next physical SPU in the node to profile in round robbin
- * order.  This way data is collected for all SPUs on the node. It does mean
- * that we need to use a relatively small value of N to ensure enough samples
- * on each SPU are collected each SPU is being profiled 1/8 of the time.
- * It may also be necessary to use a longer sample collection period.
- */
-static void cell_handle_interrupt_spu(struct pt_regs *regs,
-				      struct op_counter_config *ctr)
-{
-	u32 cpu, cpu_tmp;
-	u64 trace_entry;
-	u32 interrupt_mask;
-	u64 trace_buffer[2];
-	u64 last_trace_buffer;
-	u32 sample;
-	u32 trace_addr;
-	unsigned long sample_array_lock_flags;
-	int spu_num;
-	unsigned long flags;
-
-	/* Make sure spu event interrupt handler and spu event swap
-	 * don't access the counters simultaneously.
-	 */
-	cpu = smp_processor_id();
-	spin_lock_irqsave(&cntr_lock, flags);
-
-	cpu_tmp = cpu;
-	cbe_disable_pm(cpu);
-
-	interrupt_mask = cbe_get_and_clear_pm_interrupts(cpu);
-
-	sample = 0xABCDEF;
-	trace_entry = 0xfedcba;
-	last_trace_buffer = 0xdeadbeaf;
-
-	if ((oprofile_running == 1) && (interrupt_mask != 0)) {
-		/* disable writes to trace buff */
-		cbe_write_pm(cpu, pm_interval, 0);
-
-		/* only have one perf cntr being used, cntr 0 */
-		if ((interrupt_mask & CBE_PM_CTR_OVERFLOW_INTR(0))
-		    && ctr[0].enabled)
-			/* The SPU PC values will be read
-			 * from the trace buffer, reset counter
-			 */
-
-			cbe_write_ctr(cpu, 0, reset_value[0]);
-
-		trace_addr = cbe_read_pm(cpu, trace_address);
-
-		while (!(trace_addr & CBE_PM_TRACE_BUF_EMPTY)) {
-			/* There is data in the trace buffer to process
-			 * Read the buffer until you get to the last
-			 * entry.  This is the value we want.
-			 */
-
-			cbe_read_trace_buffer(cpu, trace_buffer);
-			trace_addr = cbe_read_pm(cpu, trace_address);
-		}
-
-		/* SPU Address 16 bit count format for 128 bit
-		 * HW trace buffer is used for the SPU PC storage
-		 *    HDR bits          0:15
-		 *    SPU Addr 0 bits   16:31
-		 *    SPU Addr 1 bits   32:47
-		 *    unused bits       48:127
-		 *
-		 * HDR: bit4 = 1 SPU Address 0 valid
-		 * HDR: bit5 = 1 SPU Address 1 valid
-		 *  - unfortunately, the valid bits don't seem to work
-		 *
-		 * Note trace_buffer[0] holds bits 0:63 of the HW
-		 * trace buffer, trace_buffer[1] holds bits 64:127
-		 */
-
-		trace_entry = trace_buffer[0]
-			& 0x00000000FFFF0000;
-
-		/* only top 16 of the 18 bit SPU PC address
-		 * is stored in trace buffer, hence shift right
-		 * by 16 -2 bits */
-		sample = trace_entry >> 14;
-		last_trace_buffer = trace_buffer[0];
-
-		spu_num = spu_evnt_phys_spu_indx
-			+ (cbe_cpu_to_node(cpu) * NUM_SPUS_PER_NODE);
-
-		/* make sure only one process at a time is calling
-		 * spu_sync_buffer()
-		 */
-		spin_lock_irqsave(&oprof_spu_smpl_arry_lck,
-				  sample_array_lock_flags);
-		spu_sync_buffer(spu_num, &sample, 1);
-		spin_unlock_irqrestore(&oprof_spu_smpl_arry_lck,
-				       sample_array_lock_flags);
-
-		smp_wmb();    /* insure spu event buffer updates are written
-			       * don't want events intermingled... */
-
-		/* The counters were frozen by the interrupt.
-		 * Reenable the interrupt and restart the counters.
-		 */
-		cbe_write_pm(cpu, pm_interval, NUM_INTERVAL_CYC);
-		cbe_enable_pm_interrupts(cpu, hdw_thread,
-					 virt_cntr_inter_mask);
-
-		/* clear the trace buffer, re-enable writes to trace buff */
-		cbe_write_pm(cpu, trace_address, 0);
-		cbe_write_pm(cpu, pm_interval, NUM_INTERVAL_CYC);
-
-		/* The writes to the various performance counters only writes
-		 * to a latch.  The new values (interrupt setting bits, reset
-		 * counter value etc.) are not copied to the actual registers
-		 * until the performance monitor is enabled.  In order to get
-		 * this to work as desired, the performance monitor needs to
-		 * be disabled while writing to the latches.  This is a
-		 * HW design issue.
-		 */
-		write_pm_cntrl(cpu);
-		cbe_enable_pm(cpu);
-	}
-	spin_unlock_irqrestore(&cntr_lock, flags);
-}
-
-static void cell_handle_interrupt_ppu(struct pt_regs *regs,
-				      struct op_counter_config *ctr)
-{
-	u32 cpu;
-	u64 pc;
-	int is_kernel;
-	unsigned long flags = 0;
-	u32 interrupt_mask;
-	int i;
-
-	cpu = smp_processor_id();
-
-	/*
-	 * Need to make sure the interrupt handler and the virt counter
-	 * routine are not running at the same time. See the
-	 * cell_virtual_cntr() routine for additional comments.
-	 */
-	spin_lock_irqsave(&cntr_lock, flags);
-
-	/*
-	 * Need to disable and reenable the performance counters
-	 * to get the desired behavior from the hardware.  This
-	 * is hardware specific.
-	 */
-
-	cbe_disable_pm(cpu);
-
-	interrupt_mask = cbe_get_and_clear_pm_interrupts(cpu);
-
-	/*
-	 * If the interrupt mask has been cleared, then the virt cntr
-	 * has cleared the interrupt.  When the thread that generated
-	 * the interrupt is restored, the data count will be restored to
-	 * 0xffffff0 to cause the interrupt to be regenerated.
-	 */
-
-	if ((oprofile_running == 1) && (interrupt_mask != 0)) {
-		pc = regs->nip;
-		is_kernel = is_kernel_addr(pc);
-
-		for (i = 0; i < num_counters; ++i) {
-			if ((interrupt_mask & CBE_PM_CTR_OVERFLOW_INTR(i))
-			    && ctr[i].enabled) {
-				oprofile_add_ext_sample(pc, regs, i, is_kernel);
-				cbe_write_ctr(cpu, i, reset_value[i]);
-			}
-		}
-
-		/*
-		 * The counters were frozen by the interrupt.
-		 * Reenable the interrupt and restart the counters.
-		 * If there was a race between the interrupt handler and
-		 * the virtual counter routine.	 The virtual counter
-		 * routine may have cleared the interrupts.  Hence must
-		 * use the virt_cntr_inter_mask to re-enable the interrupts.
-		 */
-		cbe_enable_pm_interrupts(cpu, hdw_thread,
-					 virt_cntr_inter_mask);
-
-		/*
-		 * The writes to the various performance counters only writes
-		 * to a latch.	The new values (interrupt setting bits, reset
-		 * counter value etc.) are not copied to the actual registers
-		 * until the performance monitor is enabled.  In order to get
-		 * this to work as desired, the performance monitor needs to
-		 * be disabled while writing to the latches.  This is a
-		 * HW design issue.
-		 */
-		cbe_enable_pm(cpu);
-	}
-	spin_unlock_irqrestore(&cntr_lock, flags);
-}
-
-static void cell_handle_interrupt(struct pt_regs *regs,
-				  struct op_counter_config *ctr)
-{
-	if (profiling_mode == PPU_PROFILING)
-		cell_handle_interrupt_ppu(regs, ctr);
-	else
-		cell_handle_interrupt_spu(regs, ctr);
-}
-
-/*
- * This function is called from the generic OProfile
- * driver.  When profiling PPUs, we need to do the
- * generic sync start; otherwise, do spu_sync_start.
- */
-static int cell_sync_start(void)
-{
-	if ((profiling_mode == SPU_PROFILING_CYCLES) ||
-	    (profiling_mode == SPU_PROFILING_EVENTS))
-		return spu_sync_start();
-	else
-		return DO_GENERIC_SYNC;
-}
-
-static int cell_sync_stop(void)
-{
-	if ((profiling_mode == SPU_PROFILING_CYCLES) ||
-	    (profiling_mode == SPU_PROFILING_EVENTS))
-		return spu_sync_stop();
-	else
-		return 1;
-}
-
-struct op_powerpc_model op_model_cell = {
-	.reg_setup = cell_reg_setup,
-	.cpu_setup = cell_cpu_setup,
-	.global_start = cell_global_start,
-	.global_stop = cell_global_stop,
-	.sync_start = cell_sync_start,
-	.sync_stop = cell_sync_stop,
-	.handle_interrupt = cell_handle_interrupt,
-};
diff --git a/arch/powerpc/oprofile/op_model_fsl_emb.c b/arch/powerpc/oprofile/op_model_fsl_emb.c
deleted file mode 100644
index 25dc6813ecee..000000000000
--- a/arch/powerpc/oprofile/op_model_fsl_emb.c
+++ /dev/null
@@ -1,380 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Freescale Embedded oprofile support, based on ppc64 oprofile support
- * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
- *
- * Copyright (c) 2004, 2010 Freescale Semiconductor, Inc
- *
- * Author: Andy Fleming
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- */
-
-#include <linux/oprofile.h>
-#include <linux/smp.h>
-#include <asm/ptrace.h>
-#include <asm/processor.h>
-#include <asm/cputable.h>
-#include <asm/reg_fsl_emb.h>
-#include <asm/page.h>
-#include <asm/pmc.h>
-#include <asm/oprofile_impl.h>
-
-static unsigned long reset_value[OP_MAX_COUNTER];
-
-static int num_counters;
-static int oprofile_running;
-
-static inline u32 get_pmlca(int ctr)
-{
-	u32 pmlca;
-
-	switch (ctr) {
-		case 0:
-			pmlca = mfpmr(PMRN_PMLCA0);
-			break;
-		case 1:
-			pmlca = mfpmr(PMRN_PMLCA1);
-			break;
-		case 2:
-			pmlca = mfpmr(PMRN_PMLCA2);
-			break;
-		case 3:
-			pmlca = mfpmr(PMRN_PMLCA3);
-			break;
-		case 4:
-			pmlca = mfpmr(PMRN_PMLCA4);
-			break;
-		case 5:
-			pmlca = mfpmr(PMRN_PMLCA5);
-			break;
-		default:
-			panic("Bad ctr number\n");
-	}
-
-	return pmlca;
-}
-
-static inline void set_pmlca(int ctr, u32 pmlca)
-{
-	switch (ctr) {
-		case 0:
-			mtpmr(PMRN_PMLCA0, pmlca);
-			break;
-		case 1:
-			mtpmr(PMRN_PMLCA1, pmlca);
-			break;
-		case 2:
-			mtpmr(PMRN_PMLCA2, pmlca);
-			break;
-		case 3:
-			mtpmr(PMRN_PMLCA3, pmlca);
-			break;
-		case 4:
-			mtpmr(PMRN_PMLCA4, pmlca);
-			break;
-		case 5:
-			mtpmr(PMRN_PMLCA5, pmlca);
-			break;
-		default:
-			panic("Bad ctr number\n");
-	}
-}
-
-static inline unsigned int ctr_read(unsigned int i)
-{
-	switch(i) {
-		case 0:
-			return mfpmr(PMRN_PMC0);
-		case 1:
-			return mfpmr(PMRN_PMC1);
-		case 2:
-			return mfpmr(PMRN_PMC2);
-		case 3:
-			return mfpmr(PMRN_PMC3);
-		case 4:
-			return mfpmr(PMRN_PMC4);
-		case 5:
-			return mfpmr(PMRN_PMC5);
-		default:
-			return 0;
-	}
-}
-
-static inline void ctr_write(unsigned int i, unsigned int val)
-{
-	switch(i) {
-		case 0:
-			mtpmr(PMRN_PMC0, val);
-			break;
-		case 1:
-			mtpmr(PMRN_PMC1, val);
-			break;
-		case 2:
-			mtpmr(PMRN_PMC2, val);
-			break;
-		case 3:
-			mtpmr(PMRN_PMC3, val);
-			break;
-		case 4:
-			mtpmr(PMRN_PMC4, val);
-			break;
-		case 5:
-			mtpmr(PMRN_PMC5, val);
-			break;
-		default:
-			break;
-	}
-}
-
-
-static void init_pmc_stop(int ctr)
-{
-	u32 pmlca = (PMLCA_FC | PMLCA_FCS | PMLCA_FCU |
-			PMLCA_FCM1 | PMLCA_FCM0);
-	u32 pmlcb = 0;
-
-	switch (ctr) {
-		case 0:
-			mtpmr(PMRN_PMLCA0, pmlca);
-			mtpmr(PMRN_PMLCB0, pmlcb);
-			break;
-		case 1:
-			mtpmr(PMRN_PMLCA1, pmlca);
-			mtpmr(PMRN_PMLCB1, pmlcb);
-			break;
-		case 2:
-			mtpmr(PMRN_PMLCA2, pmlca);
-			mtpmr(PMRN_PMLCB2, pmlcb);
-			break;
-		case 3:
-			mtpmr(PMRN_PMLCA3, pmlca);
-			mtpmr(PMRN_PMLCB3, pmlcb);
-			break;
-		case 4:
-			mtpmr(PMRN_PMLCA4, pmlca);
-			mtpmr(PMRN_PMLCB4, pmlcb);
-			break;
-		case 5:
-			mtpmr(PMRN_PMLCA5, pmlca);
-			mtpmr(PMRN_PMLCB5, pmlcb);
-			break;
-		default:
-			panic("Bad ctr number!\n");
-	}
-}
-
-static void set_pmc_event(int ctr, int event)
-{
-	u32 pmlca;
-
-	pmlca = get_pmlca(ctr);
-
-	pmlca = (pmlca & ~PMLCA_EVENT_MASK) |
-		((event << PMLCA_EVENT_SHIFT) &
-		 PMLCA_EVENT_MASK);
-
-	set_pmlca(ctr, pmlca);
-}
-
-static void set_pmc_user_kernel(int ctr, int user, int kernel)
-{
-	u32 pmlca;
-
-	pmlca = get_pmlca(ctr);
-
-	if(user)
-		pmlca &= ~PMLCA_FCU;
-	else
-		pmlca |= PMLCA_FCU;
-
-	if(kernel)
-		pmlca &= ~PMLCA_FCS;
-	else
-		pmlca |= PMLCA_FCS;
-
-	set_pmlca(ctr, pmlca);
-}
-
-static void set_pmc_marked(int ctr, int mark0, int mark1)
-{
-	u32 pmlca = get_pmlca(ctr);
-
-	if(mark0)
-		pmlca &= ~PMLCA_FCM0;
-	else
-		pmlca |= PMLCA_FCM0;
-
-	if(mark1)
-		pmlca &= ~PMLCA_FCM1;
-	else
-		pmlca |= PMLCA_FCM1;
-
-	set_pmlca(ctr, pmlca);
-}
-
-static void pmc_start_ctr(int ctr, int enable)
-{
-	u32 pmlca = get_pmlca(ctr);
-
-	pmlca &= ~PMLCA_FC;
-
-	if (enable)
-		pmlca |= PMLCA_CE;
-	else
-		pmlca &= ~PMLCA_CE;
-
-	set_pmlca(ctr, pmlca);
-}
-
-static void pmc_start_ctrs(int enable)
-{
-	u32 pmgc0 = mfpmr(PMRN_PMGC0);
-
-	pmgc0 &= ~PMGC0_FAC;
-	pmgc0 |= PMGC0_FCECE;
-
-	if (enable)
-		pmgc0 |= PMGC0_PMIE;
-	else
-		pmgc0 &= ~PMGC0_PMIE;
-
-	mtpmr(PMRN_PMGC0, pmgc0);
-}
-
-static void pmc_stop_ctrs(void)
-{
-	u32 pmgc0 = mfpmr(PMRN_PMGC0);
-
-	pmgc0 |= PMGC0_FAC;
-
-	pmgc0 &= ~(PMGC0_PMIE | PMGC0_FCECE);
-
-	mtpmr(PMRN_PMGC0, pmgc0);
-}
-
-static int fsl_emb_cpu_setup(struct op_counter_config *ctr)
-{
-	int i;
-
-	/* freeze all counters */
-	pmc_stop_ctrs();
-
-	for (i = 0;i < num_counters;i++) {
-		init_pmc_stop(i);
-
-		set_pmc_event(i, ctr[i].event);
-
-		set_pmc_user_kernel(i, ctr[i].user, ctr[i].kernel);
-	}
-
-	return 0;
-}
-
-static int fsl_emb_reg_setup(struct op_counter_config *ctr,
-			     struct op_system_config *sys,
-			     int num_ctrs)
-{
-	int i;
-
-	num_counters = num_ctrs;
-
-	/* Our counters count up, and "count" refers to
-	 * how much before the next interrupt, and we interrupt
-	 * on overflow.  So we calculate the starting value
-	 * which will give us "count" until overflow.
-	 * Then we set the events on the enabled counters */
-	for (i = 0; i < num_counters; ++i)
-		reset_value[i] = 0x80000000UL - ctr[i].count;
-
-	return 0;
-}
-
-static int fsl_emb_start(struct op_counter_config *ctr)
-{
-	int i;
-
-	mtmsr(mfmsr() | MSR_PMM);
-
-	for (i = 0; i < num_counters; ++i) {
-		if (ctr[i].enabled) {
-			ctr_write(i, reset_value[i]);
-			/* Set each enabled counter to only
-			 * count when the Mark bit is *not* set */
-			set_pmc_marked(i, 1, 0);
-			pmc_start_ctr(i, 1);
-		} else {
-			ctr_write(i, 0);
-
-			/* Set the ctr to be stopped */
-			pmc_start_ctr(i, 0);
-		}
-	}
-
-	/* Clear the freeze bit, and enable the interrupt.
-	 * The counters won't actually start until the rfi clears
-	 * the PMM bit */
-	pmc_start_ctrs(1);
-
-	oprofile_running = 1;
-
-	pr_debug("start on cpu %d, pmgc0 %x\n", smp_processor_id(),
-			mfpmr(PMRN_PMGC0));
-
-	return 0;
-}
-
-static void fsl_emb_stop(void)
-{
-	/* freeze counters */
-	pmc_stop_ctrs();
-
-	oprofile_running = 0;
-
-	pr_debug("stop on cpu %d, pmgc0 %x\n", smp_processor_id(),
-			mfpmr(PMRN_PMGC0));
-
-	mb();
-}
-
-
-static void fsl_emb_handle_interrupt(struct pt_regs *regs,
-				    struct op_counter_config *ctr)
-{
-	unsigned long pc;
-	int is_kernel;
-	int val;
-	int i;
-
-	pc = regs->nip;
-	is_kernel = is_kernel_addr(pc);
-
-	for (i = 0; i < num_counters; ++i) {
-		val = ctr_read(i);
-		if (val < 0) {
-			if (oprofile_running && ctr[i].enabled) {
-				oprofile_add_ext_sample(pc, regs, i, is_kernel);
-				ctr_write(i, reset_value[i]);
-			} else {
-				ctr_write(i, 0);
-			}
-		}
-	}
-
-	/* The freeze bit was set by the interrupt. */
-	/* Clear the freeze bit, and reenable the interrupt.  The
-	 * counters won't actually start until the rfi clears the PMM
-	 * bit.  The PMM bit should not be set until after the interrupt
-	 * is cleared to avoid it getting lost in some hypervisor
-	 * environments.
-	 */
-	mtmsr(mfmsr() | MSR_PMM);
-	pmc_start_ctrs(1);
-}
-
-struct op_powerpc_model op_model_fsl_emb = {
-	.reg_setup		= fsl_emb_reg_setup,
-	.cpu_setup		= fsl_emb_cpu_setup,
-	.start			= fsl_emb_start,
-	.stop			= fsl_emb_stop,
-	.handle_interrupt	= fsl_emb_handle_interrupt,
-};
diff --git a/arch/powerpc/oprofile/op_model_pa6t.c b/arch/powerpc/oprofile/op_model_pa6t.c
deleted file mode 100644
index d23061cf76bc..000000000000
--- a/arch/powerpc/oprofile/op_model_pa6t.c
+++ /dev/null
@@ -1,227 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2006-2007 PA Semi, Inc
- *
- * Author: Shashi Rao, PA Semi
- *
- * Maintained by: Olof Johansson <olof@lixom.net>
- *
- * Based on arch/powerpc/oprofile/op_model_power4.c
- */
-
-#include <linux/oprofile.h>
-#include <linux/smp.h>
-#include <linux/percpu.h>
-#include <asm/processor.h>
-#include <asm/cputable.h>
-#include <asm/oprofile_impl.h>
-#include <asm/reg.h>
-
-static unsigned char oprofile_running;
-
-/* mmcr values are set in pa6t_reg_setup, used in pa6t_cpu_setup */
-static u64 mmcr0_val;
-static u64 mmcr1_val;
-
-/* inited in pa6t_reg_setup */
-static u64 reset_value[OP_MAX_COUNTER];
-
-static inline u64 ctr_read(unsigned int i)
-{
-	switch (i) {
-	case 0:
-		return mfspr(SPRN_PA6T_PMC0);
-	case 1:
-		return mfspr(SPRN_PA6T_PMC1);
-	case 2:
-		return mfspr(SPRN_PA6T_PMC2);
-	case 3:
-		return mfspr(SPRN_PA6T_PMC3);
-	case 4:
-		return mfspr(SPRN_PA6T_PMC4);
-	case 5:
-		return mfspr(SPRN_PA6T_PMC5);
-	default:
-		printk(KERN_ERR "ctr_read called with bad arg %u\n", i);
-		return 0;
-	}
-}
-
-static inline void ctr_write(unsigned int i, u64 val)
-{
-	switch (i) {
-	case 0:
-		mtspr(SPRN_PA6T_PMC0, val);
-		break;
-	case 1:
-		mtspr(SPRN_PA6T_PMC1, val);
-		break;
-	case 2:
-		mtspr(SPRN_PA6T_PMC2, val);
-		break;
-	case 3:
-		mtspr(SPRN_PA6T_PMC3, val);
-		break;
-	case 4:
-		mtspr(SPRN_PA6T_PMC4, val);
-		break;
-	case 5:
-		mtspr(SPRN_PA6T_PMC5, val);
-		break;
-	default:
-		printk(KERN_ERR "ctr_write called with bad arg %u\n", i);
-		break;
-	}
-}
-
-
-/* precompute the values to stuff in the hardware registers */
-static int pa6t_reg_setup(struct op_counter_config *ctr,
-			   struct op_system_config *sys,
-			   int num_ctrs)
-{
-	int pmc;
-
-	/*
-	 * adjust the mmcr0.en[0-5] and mmcr0.inten[0-5] values obtained from the
-	 * event_mappings file by turning off the counters that the user doesn't
-	 * care about
-	 *
-	 * setup user and kernel profiling
-	 */
-	for (pmc = 0; pmc < cur_cpu_spec->num_pmcs; pmc++)
-		if (!ctr[pmc].enabled) {
-			sys->mmcr0 &= ~(0x1UL << pmc);
-			sys->mmcr0 &= ~(0x1UL << (pmc+12));
-			pr_debug("turned off counter %u\n", pmc);
-		}
-
-	if (sys->enable_kernel)
-		sys->mmcr0 |= PA6T_MMCR0_SUPEN | PA6T_MMCR0_HYPEN;
-	else
-		sys->mmcr0 &= ~(PA6T_MMCR0_SUPEN | PA6T_MMCR0_HYPEN);
-
-	if (sys->enable_user)
-		sys->mmcr0 |= PA6T_MMCR0_PREN;
-	else
-		sys->mmcr0 &= ~PA6T_MMCR0_PREN;
-
-	/*
-	 * The performance counter event settings are given in the mmcr0 and
-	 * mmcr1 values passed from the user in the op_system_config
-	 * structure (sys variable).
-	 */
-	mmcr0_val = sys->mmcr0;
-	mmcr1_val = sys->mmcr1;
-	pr_debug("mmcr0_val inited to %016lx\n", sys->mmcr0);
-	pr_debug("mmcr1_val inited to %016lx\n", sys->mmcr1);
-
-	for (pmc = 0; pmc < cur_cpu_spec->num_pmcs; pmc++) {
-		/* counters are 40 bit. Move to cputable at some point? */
-		reset_value[pmc] = (0x1UL << 39) - ctr[pmc].count;
-		pr_debug("reset_value for pmc%u inited to 0x%llx\n",
-				 pmc, reset_value[pmc]);
-	}
-
-	return 0;
-}
-
-/* configure registers on this cpu */
-static int pa6t_cpu_setup(struct op_counter_config *ctr)
-{
-	u64 mmcr0 = mmcr0_val;
-	u64 mmcr1 = mmcr1_val;
-
-	/* Default is all PMCs off */
-	mmcr0 &= ~(0x3FUL);
-	mtspr(SPRN_PA6T_MMCR0, mmcr0);
-
-	/* program selected programmable events in */
-	mtspr(SPRN_PA6T_MMCR1, mmcr1);
-
-	pr_debug("setup on cpu %d, mmcr0 %016lx\n", smp_processor_id(),
-		mfspr(SPRN_PA6T_MMCR0));
-	pr_debug("setup on cpu %d, mmcr1 %016lx\n", smp_processor_id(),
-		mfspr(SPRN_PA6T_MMCR1));
-
-	return 0;
-}
-
-static int pa6t_start(struct op_counter_config *ctr)
-{
-	int i;
-
-	/* Hold off event counting until rfid */
-	u64 mmcr0 = mmcr0_val | PA6T_MMCR0_HANDDIS;
-
-	for (i = 0; i < cur_cpu_spec->num_pmcs; i++)
-		if (ctr[i].enabled)
-			ctr_write(i, reset_value[i]);
-		else
-			ctr_write(i, 0UL);
-
-	mtspr(SPRN_PA6T_MMCR0, mmcr0);
-
-	oprofile_running = 1;
-
-	pr_debug("start on cpu %d, mmcr0 %llx\n", smp_processor_id(), mmcr0);
-
-	return 0;
-}
-
-static void pa6t_stop(void)
-{
-	u64 mmcr0;
-
-	/* freeze counters */
-	mmcr0 = mfspr(SPRN_PA6T_MMCR0);
-	mmcr0 |= PA6T_MMCR0_FCM0;
-	mtspr(SPRN_PA6T_MMCR0, mmcr0);
-
-	oprofile_running = 0;
-
-	pr_debug("stop on cpu %d, mmcr0 %llx\n", smp_processor_id(), mmcr0);
-}
-
-/* handle the perfmon overflow vector */
-static void pa6t_handle_interrupt(struct pt_regs *regs,
-				  struct op_counter_config *ctr)
-{
-	unsigned long pc = mfspr(SPRN_PA6T_SIAR);
-	int is_kernel = is_kernel_addr(pc);
-	u64 val;
-	int i;
-	u64 mmcr0;
-
-	/* disable perfmon counting until rfid */
-	mmcr0 = mfspr(SPRN_PA6T_MMCR0);
-	mtspr(SPRN_PA6T_MMCR0, mmcr0 | PA6T_MMCR0_HANDDIS);
-
-	/* Record samples. We've got one global bit for whether a sample
-	 * was taken, so add it for any counter that triggered overflow.
-	 */
-	for (i = 0; i < cur_cpu_spec->num_pmcs; i++) {
-		val = ctr_read(i);
-		if (val & (0x1UL << 39)) { /* Overflow bit set */
-			if (oprofile_running && ctr[i].enabled) {
-				if (mmcr0 & PA6T_MMCR0_SIARLOG)
-					oprofile_add_ext_sample(pc, regs, i, is_kernel);
-				ctr_write(i, reset_value[i]);
-			} else {
-				ctr_write(i, 0UL);
-			}
-		}
-	}
-
-	/* Restore mmcr0 to a good known value since the PMI changes it */
-	mmcr0 = mmcr0_val | PA6T_MMCR0_HANDDIS;
-	mtspr(SPRN_PA6T_MMCR0, mmcr0);
-}
-
-struct op_powerpc_model op_model_pa6t = {
-	.reg_setup		= pa6t_reg_setup,
-	.cpu_setup		= pa6t_cpu_setup,
-	.start			= pa6t_start,
-	.stop			= pa6t_stop,
-	.handle_interrupt	= pa6t_handle_interrupt,
-};
diff --git a/arch/powerpc/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c
deleted file mode 100644
index 2ae6b86ff97b..000000000000
--- a/arch/powerpc/oprofile/op_model_power4.c
+++ /dev/null
@@ -1,438 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
- * Added mmcra[slot] support:
- * Copyright (C) 2006-2007 Will Schmidt <willschm@us.ibm.com>, IBM
- */
-
-#include <linux/oprofile.h>
-#include <linux/smp.h>
-#include <asm/firmware.h>
-#include <asm/ptrace.h>
-#include <asm/processor.h>
-#include <asm/cputable.h>
-#include <asm/rtas.h>
-#include <asm/oprofile_impl.h>
-#include <asm/reg.h>
-
-#define dbg(args...)
-#define OPROFILE_PM_PMCSEL_MSK      0xffULL
-#define OPROFILE_PM_UNIT_SHIFT      60
-#define OPROFILE_PM_UNIT_MSK        0xfULL
-#define OPROFILE_MAX_PMC_NUM        3
-#define OPROFILE_PMSEL_FIELD_WIDTH  8
-#define OPROFILE_UNIT_FIELD_WIDTH   4
-#define MMCRA_SIAR_VALID_MASK       0x10000000ULL
-
-static unsigned long reset_value[OP_MAX_COUNTER];
-
-static int oprofile_running;
-static int use_slot_nums;
-
-/* mmcr values are set in power4_reg_setup, used in power4_cpu_setup */
-static u32 mmcr0_val;
-static u64 mmcr1_val;
-static u64 mmcra_val;
-static u32 cntr_marked_events;
-
-static int power7_marked_instr_event(u64 mmcr1)
-{
-	u64 psel, unit;
-	int pmc, cntr_marked_events = 0;
-
-	/* Given the MMCR1 value, look at the field for each counter to
-	 * determine if it is a marked event.  Code based on the function
-	 * power7_marked_instr_event() in file arch/powerpc/perf/power7-pmu.c.
-	 */
-	for (pmc = 0; pmc < 4; pmc++) {
-		psel = mmcr1 & (OPROFILE_PM_PMCSEL_MSK
-				<< (OPROFILE_MAX_PMC_NUM - pmc)
-				* OPROFILE_PMSEL_FIELD_WIDTH);
-		psel = (psel >> ((OPROFILE_MAX_PMC_NUM - pmc)
-				 * OPROFILE_PMSEL_FIELD_WIDTH)) & ~1ULL;
-		unit = mmcr1 & (OPROFILE_PM_UNIT_MSK
-				<< (OPROFILE_PM_UNIT_SHIFT
-				    - (pmc * OPROFILE_PMSEL_FIELD_WIDTH )));
-		unit = unit >> (OPROFILE_PM_UNIT_SHIFT
-				- (pmc * OPROFILE_PMSEL_FIELD_WIDTH));
-
-		switch (psel >> 4) {
-		case 2:
-			cntr_marked_events |= (pmc == 1 || pmc == 3) << pmc;
-			break;
-		case 3:
-			if (psel == 0x3c) {
-				cntr_marked_events |= (pmc == 0) << pmc;
-				break;
-			}
-
-			if (psel == 0x3e) {
-				cntr_marked_events |= (pmc != 1) << pmc;
-				break;
-			}
-
-			cntr_marked_events |= 1 << pmc;
-			break;
-		case 4:
-		case 5:
-			cntr_marked_events |= (unit == 0xd) << pmc;
-			break;
-		case 6:
-			if (psel == 0x64)
-				cntr_marked_events |= (pmc >= 2) << pmc;
-			break;
-		case 8:
-			cntr_marked_events |= (unit == 0xd) << pmc;
-			break;
-		}
-	}
-	return cntr_marked_events;
-}
-
-static int power4_reg_setup(struct op_counter_config *ctr,
-			     struct op_system_config *sys,
-			     int num_ctrs)
-{
-	int i;
-
-	/*
-	 * The performance counter event settings are given in the mmcr0,
-	 * mmcr1 and mmcra values passed from the user in the
-	 * op_system_config structure (sys variable).
-	 */
-	mmcr0_val = sys->mmcr0;
-	mmcr1_val = sys->mmcr1;
-	mmcra_val = sys->mmcra;
-
-	/* Power 7+ and newer architectures:
-	 * Determine which counter events in the group (the group of events is
-	 * specified by the bit settings in the MMCR1 register) are marked
-	 * events for use in the interrupt handler.  Do the calculation once
-	 * before OProfile starts.  Information is used in the interrupt
-	 * handler.  Starting with Power 7+ we only record the sample for
-	 * marked events if the SIAR valid bit is set.  For non marked events
-	 * the sample is always recorded.
-	 */
-	if (pvr_version_is(PVR_POWER7p))
-		cntr_marked_events = power7_marked_instr_event(mmcr1_val);
-	else
-		cntr_marked_events = 0; /* For older processors, set the bit map
-					 * to zero so the sample will always be
-					 * be recorded.
-					 */
-
-	for (i = 0; i < cur_cpu_spec->num_pmcs; ++i)
-		reset_value[i] = 0x80000000UL - ctr[i].count;
-
-	/* setup user and kernel profiling */
-	if (sys->enable_kernel)
-		mmcr0_val &= ~MMCR0_KERNEL_DISABLE;
-	else
-		mmcr0_val |= MMCR0_KERNEL_DISABLE;
-
-	if (sys->enable_user)
-		mmcr0_val &= ~MMCR0_PROBLEM_DISABLE;
-	else
-		mmcr0_val |= MMCR0_PROBLEM_DISABLE;
-
-	if (pvr_version_is(PVR_POWER4) || pvr_version_is(PVR_POWER4p) ||
-	    pvr_version_is(PVR_970) || pvr_version_is(PVR_970FX) ||
-	    pvr_version_is(PVR_970MP) || pvr_version_is(PVR_970GX) ||
-	    pvr_version_is(PVR_POWER5) || pvr_version_is(PVR_POWER5p))
-		use_slot_nums = 1;
-
-	return 0;
-}
-
-extern void ppc_enable_pmcs(void);
-
-/*
- * Older CPUs require the MMCRA sample bit to be always set, but newer 
- * CPUs only want it set for some groups. Eventually we will remove all
- * knowledge of this bit in the kernel, oprofile userspace should be
- * setting it when required.
- *
- * In order to keep current installations working we force the bit for
- * those older CPUs. Once everyone has updated their oprofile userspace we
- * can remove this hack.
- */
-static inline int mmcra_must_set_sample(void)
-{
-	if (pvr_version_is(PVR_POWER4) || pvr_version_is(PVR_POWER4p) ||
-	    pvr_version_is(PVR_970) || pvr_version_is(PVR_970FX) ||
-	    pvr_version_is(PVR_970MP) || pvr_version_is(PVR_970GX))
-		return 1;
-
-	return 0;
-}
-
-static int power4_cpu_setup(struct op_counter_config *ctr)
-{
-	unsigned int mmcr0 = mmcr0_val;
-	unsigned long mmcra = mmcra_val;
-
-	ppc_enable_pmcs();
-
-	/* set the freeze bit */
-	mmcr0 |= MMCR0_FC;
-	mtspr(SPRN_MMCR0, mmcr0);
-
-	mmcr0 |= MMCR0_FCM1|MMCR0_PMXE|MMCR0_FCECE;
-	mmcr0 |= MMCR0_PMC1CE|MMCR0_PMCjCE;
-	mtspr(SPRN_MMCR0, mmcr0);
-
-	mtspr(SPRN_MMCR1, mmcr1_val);
-
-	if (mmcra_must_set_sample())
-		mmcra |= MMCRA_SAMPLE_ENABLE;
-	mtspr(SPRN_MMCRA, mmcra);
-
-	dbg("setup on cpu %d, mmcr0 %lx\n", smp_processor_id(),
-	    mfspr(SPRN_MMCR0));
-	dbg("setup on cpu %d, mmcr1 %lx\n", smp_processor_id(),
-	    mfspr(SPRN_MMCR1));
-	dbg("setup on cpu %d, mmcra %lx\n", smp_processor_id(),
-	    mfspr(SPRN_MMCRA));
-
-	return 0;
-}
-
-static int power4_start(struct op_counter_config *ctr)
-{
-	int i;
-	unsigned int mmcr0;
-
-	/* set the PMM bit (see comment below) */
-	mtmsr(mfmsr() | MSR_PMM);
-
-	for (i = 0; i < cur_cpu_spec->num_pmcs; ++i) {
-		if (ctr[i].enabled) {
-			classic_ctr_write(i, reset_value[i]);
-		} else {
-			classic_ctr_write(i, 0);
-		}
-	}
-
-	mmcr0 = mfspr(SPRN_MMCR0);
-
-	/*
-	 * We must clear the PMAO bit on some (GQ) chips. Just do it
-	 * all the time
-	 */
-	mmcr0 &= ~MMCR0_PMAO;
-
-	/*
-	 * now clear the freeze bit, counting will not start until we
-	 * rfid from this excetion, because only at that point will
-	 * the PMM bit be cleared
-	 */
-	mmcr0 &= ~MMCR0_FC;
-	mtspr(SPRN_MMCR0, mmcr0);
-
-	oprofile_running = 1;
-
-	dbg("start on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0);
-	return 0;
-}
-
-static void power4_stop(void)
-{
-	unsigned int mmcr0;
-
-	/* freeze counters */
-	mmcr0 = mfspr(SPRN_MMCR0);
-	mmcr0 |= MMCR0_FC;
-	mtspr(SPRN_MMCR0, mmcr0);
-
-	oprofile_running = 0;
-
-	dbg("stop on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0);
-
-	mb();
-}
-
-/* Fake functions used by canonicalize_pc */
-static void __used hypervisor_bucket(void)
-{
-}
-
-static void __used rtas_bucket(void)
-{
-}
-
-static void __used kernel_unknown_bucket(void)
-{
-}
-
-/*
- * On GQ and newer the MMCRA stores the HV and PR bits at the time
- * the SIAR was sampled. We use that to work out if the SIAR was sampled in
- * the hypervisor, our exception vectors or RTAS.
- * If the MMCRA_SAMPLE_ENABLE bit is set, we can use the MMCRA[slot] bits
- * to more accurately identify the address of the sampled instruction. The
- * mmcra[slot] bits represent the slot number of a sampled instruction
- * within an instruction group.  The slot will contain a value between 1
- * and 5 if MMCRA_SAMPLE_ENABLE is set, otherwise 0.
- */
-static unsigned long get_pc(struct pt_regs *regs)
-{
-	unsigned long pc = mfspr(SPRN_SIAR);
-	unsigned long mmcra;
-	unsigned long slot;
-
-	/* Can't do much about it */
-	if (!cur_cpu_spec->oprofile_mmcra_sihv)
-		return pc;
-
-	mmcra = mfspr(SPRN_MMCRA);
-
-	if (use_slot_nums && (mmcra & MMCRA_SAMPLE_ENABLE)) {
-		slot = ((mmcra & MMCRA_SLOT) >> MMCRA_SLOT_SHIFT);
-		if (slot > 1)
-			pc += 4 * (slot - 1);
-	}
-
-	/* Were we in the hypervisor? */
-	if (firmware_has_feature(FW_FEATURE_LPAR) &&
-	    (mmcra & cur_cpu_spec->oprofile_mmcra_sihv))
-		/* function descriptor madness */
-		return *((unsigned long *)hypervisor_bucket);
-
-	/* We were in userspace, nothing to do */
-	if (mmcra & cur_cpu_spec->oprofile_mmcra_sipr)
-		return pc;
-
-#ifdef CONFIG_PPC_RTAS
-	/* Were we in RTAS? */
-	if (pc >= rtas.base && pc < (rtas.base + rtas.size))
-		/* function descriptor madness */
-		return *((unsigned long *)rtas_bucket);
-#endif
-
-	/* Were we in our exception vectors or SLB real mode miss handler? */
-	if (pc < 0x1000000UL)
-		return (unsigned long)__va(pc);
-
-	/* Not sure where we were */
-	if (!is_kernel_addr(pc))
-		/* function descriptor madness */
-		return *((unsigned long *)kernel_unknown_bucket);
-
-	return pc;
-}
-
-static int get_kernel(unsigned long pc, unsigned long mmcra)
-{
-	int is_kernel;
-
-	if (!cur_cpu_spec->oprofile_mmcra_sihv) {
-		is_kernel = is_kernel_addr(pc);
-	} else {
-		is_kernel = ((mmcra & cur_cpu_spec->oprofile_mmcra_sipr) == 0);
-	}
-
-	return is_kernel;
-}
-
-static bool pmc_overflow(unsigned long val)
-{
-	if ((int)val < 0)
-		return true;
-
-	/*
-	 * Events on POWER7 can roll back if a speculative event doesn't
-	 * eventually complete. Unfortunately in some rare cases they will
-	 * raise a performance monitor exception. We need to catch this to
-	 * ensure we reset the PMC. In all cases the PMC will be 256 or less
-	 * cycles from overflow.
-	 *
-	 * We only do this if the first pass fails to find any overflowing
-	 * PMCs because a user might set a period of less than 256 and we
-	 * don't want to mistakenly reset them.
-	 */
-	if (pvr_version_is(PVR_POWER7) && ((0x80000000 - val) <= 256))
-		return true;
-
-	return false;
-}
-
-static void power4_handle_interrupt(struct pt_regs *regs,
-				    struct op_counter_config *ctr)
-{
-	unsigned long pc;
-	int is_kernel;
-	int val;
-	int i;
-	unsigned int mmcr0;
-	unsigned long mmcra;
-	bool siar_valid = false;
-
-	mmcra = mfspr(SPRN_MMCRA);
-
-	pc = get_pc(regs);
-	is_kernel = get_kernel(pc, mmcra);
-
-	/* set the PMM bit (see comment below) */
-	mtmsr(mfmsr() | MSR_PMM);
-
-	/* Check that the SIAR  valid bit in MMCRA is set to 1. */
-	if ((mmcra & MMCRA_SIAR_VALID_MASK) == MMCRA_SIAR_VALID_MASK)
-		siar_valid = true;
-
-	for (i = 0; i < cur_cpu_spec->num_pmcs; ++i) {
-		val = classic_ctr_read(i);
-		if (pmc_overflow(val)) {
-			if (oprofile_running && ctr[i].enabled) {
-				/* Power 7+ and newer architectures:
-				 * If the event is a marked event, then only
-				 * save the sample if the SIAR valid bit is
-				 * set.  If the event is not marked, then
-				 * always save the sample.
-				 * Note, the Sample enable bit in the MMCRA
-				 * register must be set to 1 if the group
-				 * contains a marked event.
-				 */
-				if ((siar_valid &&
-				     (cntr_marked_events & (1 << i)))
-				    || !(cntr_marked_events & (1 << i)))
-					oprofile_add_ext_sample(pc, regs, i,
-								is_kernel);
-
-				classic_ctr_write(i, reset_value[i]);
-			} else {
-				classic_ctr_write(i, 0);
-			}
-		}
-	}
-
-	mmcr0 = mfspr(SPRN_MMCR0);
-
-	/* reset the perfmon trigger */
-	mmcr0 |= MMCR0_PMXE;
-
-	/*
-	 * We must clear the PMAO bit on some (GQ) chips. Just do it
-	 * all the time
-	 */
-	mmcr0 &= ~MMCR0_PMAO;
-
-	/* Clear the appropriate bits in the MMCRA */
-	mmcra &= ~cur_cpu_spec->oprofile_mmcra_clear;
-	mtspr(SPRN_MMCRA, mmcra);
-
-	/*
-	 * now clear the freeze bit, counting will not start until we
-	 * rfid from this exception, because only at that point will
-	 * the PMM bit be cleared
-	 */
-	mmcr0 &= ~MMCR0_FC;
-	mtspr(SPRN_MMCR0, mmcr0);
-}
-
-struct op_powerpc_model op_model_power4 = {
-	.reg_setup		= power4_reg_setup,
-	.cpu_setup		= power4_cpu_setup,
-	.start			= power4_start,
-	.stop			= power4_stop,
-	.handle_interrupt	= power4_handle_interrupt,
-};
diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig
index f2ff359041ee..e7c976bcadff 100644
--- a/arch/powerpc/platforms/cell/Kconfig
+++ b/arch/powerpc/platforms/cell/Kconfig
@@ -100,8 +100,3 @@ config CBE_CPUFREQ_SPU_GOVERNOR
 	  the minimal possible frequency.
 
 endmenu
-
-config OPROFILE_CELL
-	def_bool y
-	depends on PPC_CELL_NATIVE && (OPROFILE = m || OPROFILE = y) && SPU_BASE
-
diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile
index 10064a33ca96..7ea6692f67e2 100644
--- a/arch/powerpc/platforms/cell/Makefile
+++ b/arch/powerpc/platforms/cell/Makefile
@@ -19,7 +19,6 @@ spu-priv1-$(CONFIG_PPC_CELL_COMMON)	+= spu_priv1_mmio.o
 spu-manage-$(CONFIG_PPC_CELL_COMMON)	+= spu_manage.o
 
 obj-$(CONFIG_SPU_BASE)			+= spu_callbacks.o spu_base.o \
-					   spu_notify.o \
 					   spu_syscalls.o \
 					   $(spu-priv1-y) \
 					   $(spu-manage-y) \
diff --git a/arch/powerpc/platforms/cell/spu_notify.c b/arch/powerpc/platforms/cell/spu_notify.c
deleted file mode 100644
index 67870abf3715..000000000000
--- a/arch/powerpc/platforms/cell/spu_notify.c
+++ /dev/null
@@ -1,55 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Move OProfile dependencies from spufs module to the kernel so it
- * can run on non-cell PPC.
- *
- * Copyright (C) IBM 2005
- */
-
-#undef DEBUG
-
-#include <linux/export.h>
-#include <linux/notifier.h>
-#include <asm/spu.h>
-#include "spufs/spufs.h"
-
-static BLOCKING_NOTIFIER_HEAD(spu_switch_notifier);
-
-void spu_switch_notify(struct spu *spu, struct spu_context *ctx)
-{
-	blocking_notifier_call_chain(&spu_switch_notifier,
-				     ctx ? ctx->object_id : 0, spu);
-}
-EXPORT_SYMBOL_GPL(spu_switch_notify);
-
-int spu_switch_event_register(struct notifier_block *n)
-{
-	int ret;
-	ret = blocking_notifier_chain_register(&spu_switch_notifier, n);
-	if (!ret)
-		notify_spus_active();
-	return ret;
-}
-EXPORT_SYMBOL_GPL(spu_switch_event_register);
-
-int spu_switch_event_unregister(struct notifier_block *n)
-{
-	return blocking_notifier_chain_unregister(&spu_switch_notifier, n);
-}
-EXPORT_SYMBOL_GPL(spu_switch_event_unregister);
-
-void spu_set_profile_private_kref(struct spu_context *ctx,
-				  struct kref *prof_info_kref,
-				  void (* prof_info_release) (struct kref *kref))
-{
-	ctx->prof_priv_kref = prof_info_kref;
-	ctx->prof_priv_release = prof_info_release;
-}
-EXPORT_SYMBOL_GPL(spu_set_profile_private_kref);
-
-void *spu_get_profile_private_kref(struct spu_context *ctx)
-{
-	return ctx->prof_priv_kref;
-}
-EXPORT_SYMBOL_GPL(spu_get_profile_private_kref);
-
diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c
index 3f2380f40f99..ce52b87496d2 100644
--- a/arch/powerpc/platforms/cell/spufs/run.c
+++ b/arch/powerpc/platforms/cell/spufs/run.c
@@ -353,7 +353,6 @@ static int spu_process_callback(struct spu_context *ctx)
 long spufs_run_spu(struct spu_context *ctx, u32 *npc, u32 *event)
 {
 	int ret;
-	struct spu *spu;
 	u32 status;
 
 	if (mutex_lock_interruptible(&ctx->run_mutex))
@@ -386,13 +385,10 @@ long spufs_run_spu(struct spu_context *ctx, u32 *npc, u32 *event)
 			mutex_lock(&ctx->state_mutex);
 			break;
 		}
-		spu = ctx->spu;
 		if (unlikely(test_and_clear_bit(SPU_SCHED_NOTIFY_ACTIVE,
 						&ctx->sched_flags))) {
-			if (!(status & SPU_STATUS_STOPPED_BY_STOP)) {
-				spu_switch_notify(spu, ctx);
+			if (!(status & SPU_STATUS_STOPPED_BY_STOP))
 				continue;
-			}
 		}
 
 		spuctx_switch_state(ctx, SPU_UTIL_SYSTEM);
diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index f18d5067cd0f..9d06fffb1526 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -181,9 +181,6 @@ void do_notify_spus_active(void)
 
 	/*
 	 * Wake up the active spu_contexts.
-	 *
-	 * When the awakened processes see their "notify_active" flag is set,
-	 * they will call spu_switch_notify().
 	 */
 	for_each_online_node(node) {
 		struct spu *spu;
@@ -239,7 +236,6 @@ static void spu_bind_context(struct spu *spu, struct spu_context *ctx)
 	spu_switch_log_notify(spu, ctx, SWITCH_LOG_START, 0);
 	spu_restore(&ctx->csa, spu);
 	spu->timestamp = jiffies;
-	spu_switch_notify(spu, ctx);
 	ctx->state = SPU_STATE_RUNNABLE;
 
 	spuctx_switch_state(ctx, SPU_UTIL_USER);
@@ -440,7 +436,6 @@ static void spu_unbind_context(struct spu *spu, struct spu_context *ctx)
 		 */
 		atomic_dec_if_positive(&ctx->gang->aff_sched_count);
 
-	spu_switch_notify(spu, NULL);
 	spu_unmap_mappings(ctx);
 	spu_save(&ctx->csa, spu);
 	spu_switch_log_notify(spu, ctx, SWITCH_LOG_STOP, 0);
diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h
index 1ba4d884febf..afc1d6604d12 100644
--- a/arch/powerpc/platforms/cell/spufs/spufs.h
+++ b/arch/powerpc/platforms/cell/spufs/spufs.h
@@ -281,7 +281,6 @@ void spu_del_from_rq(struct spu_context *ctx);
 int spu_activate(struct spu_context *ctx, unsigned long flags);
 void spu_deactivate(struct spu_context *ctx);
 void spu_yield(struct spu_context *ctx);
-void spu_switch_notify(struct spu *spu, struct spu_context *ctx);
 void spu_switch_log_notify(struct spu *spu, struct spu_context *ctx,
 		u32 type, u32 val);
 void spu_set_timeslice(struct spu_context *ctx);