powerpc/eeh: Introduce EEH_PE_INVALID type PE

When EEH error happens on the PE whose PCI devices don't have
attached drivers. In function eeh_handle_event(), the default
value PCI_ERS_RESULT_NONE will be returned after iterating all
drivers of those PCI devices belonging to the PE. Actually, we
don't have installed drivers for the PCI devices. Under the
circumstance, we will remove the corresponding PCI bus of the PE,
including the associated EEH devices and PE instance. However,
we still need the information stored in the PE instance to do PE
reset after that. So it's unsafe to free the PE instance.

The patch introduces EEH_PE_INVALID type PE to address the issue.
When the PCI bus and the corresponding attached EEH devices are
removed, we will mark the PE as EEH_PE_INVALID. At later point,
the PE will be changed to EEH_PE_DEVICE or EEH_PE_BUS when the
corresponding EEH devices are attached again.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

1 files changed, 4 insertions, 3 deletions

diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index 58c5ee61e700..afeb40086fb2 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -45,9 +45,10 @@ struct device_node;
  * in the corresponding PHB. Therefore, the root PEs should be created
  * against existing PHBs in on-to-one fashion.
  */
-#define EEH_PE_PHB	1	/* PHB PE    */
-#define EEH_PE_DEVICE 	2	/* Device PE */
-#define EEH_PE_BUS	3	/* Bus PE    */
+#define EEH_PE_INVALID	(1 << 0)	/* Invalid   */
+#define EEH_PE_PHB	(1 << 1)	/* PHB PE    */
+#define EEH_PE_DEVICE 	(1 << 2)	/* Device PE */
+#define EEH_PE_BUS	(1 << 3)	/* Bus PE    */
 
 #define EEH_PE_ISOLATED		(1 << 0)	/* Isolated PE		*/
 #define EEH_PE_RECOVERING	(1 << 1)	/* Recovering PE	*/