diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2023-06-29 15:01:51 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2023-06-29 15:01:51 -0700 |
| commit | b775d6c5859affe00527cbe74263de05cfe6b9f9 (patch) | |
| tree | 1cc6ba7ba82683bfcc91d0d2e60fbf638469a5be /arch/mips | |
| parent | 18f38fedfa71b5b7e954fc8f1e31bda75d8f1d7c (diff) | |
| parent | e47084e116fccaa43644360d7c0b997979abce3e (diff) | |
| download | lwn-b775d6c5859affe00527cbe74263de05cfe6b9f9.tar.gz lwn-b775d6c5859affe00527cbe74263de05cfe6b9f9.zip | |
Merge tag 'mips_6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- add support for TP-Link HC220 G5 v1
- add support for Wifi/Bluetooth on CI20
- rework Ralink clock and reset handling
- cleanups and fixes
* tag 'mips_6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (58 commits)
MIPS: Loongson64: DTS: Add RTC support to Loongson-2K1000
MIPS: Loongson64: DTS: Add RTC support to LS7A PCH
MIPS: OCTEON: octeon-usb: cleanup divider calculation
MIPS: OCTEON: octeon-usb: introduce dwc3_octeon_{read,write}q
MIPS: OCTEON: octeon-usb: move gpio config to separate function
MIPS: OCTEON: octeon-usb: use bitfields for shim register
MIPS: OCTEON: octeon-usb: use bitfields for host config register
MIPS: OCTEON: octeon-usb: use bitfields for control register
MIPS: OCTEON: octeon-usb: add all register offsets
mips: ralink: match all supported system controller compatible strings
MIPS: dec: prom: Address -Warray-bounds warning
MIPS: DTS: CI20: Raise VDDCORE voltage to 1.125 volts
clk: ralink: mtmips: Fix uninitialized use of ret in mtmips_register_{fixed,factor}_clocks()
mips: ralink: introduce commonly used remap node function
mips: pci-mt7620: use dev_info() to log PCIe device detection result
mips: pci-mt7620: do not print NFTS register value as error log
MAINTAINERS: add Mediatek MTMIPS Clock maintainer
mips: ralink: get cpu rate from new driver code
mips: ralink: remove reset related code
mips: ralink: mt7620: remove clock related code
...
Diffstat (limited to 'arch/mips')
48 files changed, 893 insertions, 1125 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index d49d5fc40021..fc6fba925aea 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -45,6 +45,7 @@ config MIPS select GENERIC_LIB_UCMPDI2 select GENERIC_SCHED_CLOCK if !CAVIUM_OCTEON_SOC select GENERIC_SMP_IDLE_THREAD + select GENERIC_IDLE_POLL_SETUP select GENERIC_TIME_VSYSCALL select GUP_GET_PXX_LOW_HIGH if CPU_MIPS32 && PHYS_ADDR_T_64BIT select HAS_IOPORT if !NO_IOPORT_MAP || ISA @@ -80,7 +81,6 @@ config MIPS select HAVE_LD_DEAD_CODE_DATA_ELIMINATION select HAVE_MOD_ARCH_SPECIFIC select HAVE_NMI - select HAVE_PATA_PLATFORM select HAVE_PERF_EVENTS select HAVE_PERF_REGS select HAVE_PERF_USER_STACK_DUMP @@ -155,9 +155,11 @@ config MIPS_GENERIC_KERNEL select SWAP_IO_SPACE select SYS_HAS_CPU_MIPS32_R1 select SYS_HAS_CPU_MIPS32_R2 + select SYS_HAS_CPU_MIPS32_R5 select SYS_HAS_CPU_MIPS32_R6 select SYS_HAS_CPU_MIPS64_R1 select SYS_HAS_CPU_MIPS64_R2 + select SYS_HAS_CPU_MIPS64_R5 select SYS_HAS_CPU_MIPS64_R6 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL diff --git a/arch/mips/alchemy/Kconfig b/arch/mips/alchemy/Kconfig index 69734120ada1..6ca81e1bd35c 100644 --- a/arch/mips/alchemy/Kconfig +++ b/arch/mips/alchemy/Kconfig @@ -14,6 +14,7 @@ config MIPS_DB1XXX bool "Alchemy DB1XXX / PB1XXX boards" select GPIOLIB select HAVE_PCI + select HAVE_PATA_PLATFORM select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_HAS_EARLY_PRINTK help diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts index 239c4537484d..a141a699b790 100644 --- a/arch/mips/boot/dts/ingenic/ci20.dts +++ b/arch/mips/boot/dts/ingenic/ci20.dts @@ -67,14 +67,14 @@ }; }; - eth0_power: fixedregulator@0 { + eth0_power: fixedregulator-0 { compatible = "regulator-fixed"; regulator-name = "eth0_power"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpb 25 GPIO_ACTIVE_LOW>; + gpio = <&gpb 25 0>; enable-active-high; }; @@ -97,25 +97,64 @@ gpios = <&gpe 3 GPIO_ACTIVE_LOW>; }; - wlan0_power: fixedregulator@1 { + bt_power: fixedregulator-1 { compatible = "regulator-fixed"; - regulator-name = "wlan0_power"; + regulator-name = "bt_power"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-settling-time-us = <1400>; + + vin-supply = <&vcc_50>; - gpio = <&gpb 19 GPIO_ACTIVE_LOW>; + gpio = <&gpb 19 0>; enable-active-high; }; - otg_power: fixedregulator@2 { + otg_power: fixedregulator-2 { compatible = "regulator-fixed"; regulator-name = "otg_power"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpf 15 GPIO_ACTIVE_LOW>; + gpio = <&gpf 15 0>; enable-active-high; }; + + wifi_power: fixedregulator-4 { + compatible = "regulator-fixed"; + + regulator-name = "wifi_power"; + + /* + * Technically it's 5V, the WiFi chip has its own internal + * regulators; but the MMC/SD subsystem won't accept such a + * value. + */ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-settling-time-us = <150000>; + + vin-supply = <&bt_power>; + }; + + vcc_33v: fixedregulator-5 { + compatible = "regulator-fixed"; + + regulator-name = "vcc_33v"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + wifi_pwrseq: pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpf 7 GPIO_ACTIVE_LOW>; + + clocks = <&rtc_dev>; + clock-names = "ext_clock"; + }; }; &ext { @@ -129,10 +168,11 @@ */ assigned-clocks = <&cgu JZ4780_CLK_OTGPHY>, <&cgu JZ4780_CLK_RTC>, <&cgu JZ4780_CLK_SSIPLL>, <&cgu JZ4780_CLK_SSI>, - <&cgu JZ4780_CLK_HDMI>; + <&cgu JZ4780_CLK_HDMI>, <&cgu JZ4780_CLK_MSCMUX>; assigned-clock-parents = <0>, <&cgu JZ4780_CLK_RTCLK>, <&cgu JZ4780_CLK_MPLL>, - <&cgu JZ4780_CLK_SSIPLL>; + <&cgu JZ4780_CLK_SSIPLL>, + <0>, <&cgu JZ4780_CLK_MPLL>; assigned-clock-rates = <48000000>, <0>, <54000000>, <0>, <27000000>; }; @@ -160,24 +200,33 @@ pinctrl-0 = <&pins_mmc0>; cd-gpios = <&gpf 20 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vcc_33v>; + vqmmc-supply = <&vcc_33v>; }; &mmc1 { status = "okay"; bus-width = <4>; - max-frequency = <50000000>; + max-frequency = <25000000>; + mmc-pwrseq = <&wifi_pwrseq>; + vmmc-supply = <&wifi_power>; + vqmmc-supply = <&wifi_io>; non-removable; pinctrl-names = "default"; pinctrl-0 = <&pins_mmc1>; - brcmf: wifi@1 { -/* reg = <4>;*/ - compatible = "brcm,bcm4330-fmac"; - vcc-supply = <&wlan0_power>; - device-wakeup-gpios = <&gpd 9 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&gpf 7 GPIO_ACTIVE_LOW>; + #address-cells = <1>; + #size-cells = <0>; + + wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + + interrupt-parent = <&gpd>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "host-wake"; }; }; @@ -204,11 +253,20 @@ bluetooth { compatible = "brcm,bcm4330-bt"; - reset-gpios = <&gpf 8 GPIO_ACTIVE_HIGH>; - vcc-supply = <&wlan0_power>; + + vbat-supply = <&bt_power>; + vddio-supply = <&wifi_io>; + + interrupt-parent = <&gpf>; + interrupts = <6 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "host-wakeup"; + + clocks = <&rtc_dev>; + clock-names = "lpo"; + + reset-gpios = <&gpf 8 GPIO_ACTIVE_LOW>; device-wakeup-gpios = <&gpf 5 GPIO_ACTIVE_HIGH>; - host-wakeup-gpios = <&gpf 6 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&gpf 4 GPIO_ACTIVE_LOW>; + shutdown-gpios = <&gpf 4 GPIO_ACTIVE_HIGH>; }; }; @@ -237,59 +295,54 @@ act8600: act8600@5a { compatible = "active-semi,act8600"; reg = <0x5a>; - status = "okay"; regulators { - vddcore: SUDCDC1 { - regulator-name = "DCDC_REG1"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; + vddcore: DCDC1 { + regulator-min-microvolt = <1125000>; + regulator-max-microvolt = <1125000>; + vp1-supply = <&vcc_33v>; regulator-always-on; }; - vddmem: SUDCDC2 { - regulator-name = "DCDC_REG2"; + vddmem: DCDC2 { regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; + vp2-supply = <&vcc_33v>; regulator-always-on; }; - vcc_33: SUDCDC3 { - regulator-name = "DCDC_REG3"; + vcc_33: DCDC3 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + vp3-supply = <&vcc_33v>; regulator-always-on; }; - vcc_50: SUDCDC4 { - regulator-name = "SUDCDC_REG4"; + vcc_50: SUDCDC_REG4 { regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; }; - vcc_25: LDO_REG5 { - regulator-name = "LDO_REG5"; + vcc_25: LDO5 { regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; + inl-supply = <&vcc_33v>; regulator-always-on; }; - wifi_io: LDO_REG6 { - regulator-name = "LDO_REG6"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-always-on; + wifi_io: LDO6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-settling-time-us = <150000>; + inl-supply = <&vcc_33v>; }; - vcc_28: LDO_REG7 { - regulator-name = "LDO_REG7"; + cim_io_28: LDO7 { regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - regulator-always-on; + inl-supply = <&vcc_33v>; }; - vcc_15: LDO_REG8 { - regulator-name = "LDO_REG8"; + cim_io_15: LDO8 { regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; - regulator-always-on; + inl-supply = <&vcc_33v>; }; vrtc_18: LDO_REG9 { - regulator-name = "LDO_REG9"; /* Despite the datasheet stating 3.3V * for REG9 and the driver expecting that, * REG9 outputs 1.8V. @@ -303,7 +356,6 @@ regulator-always-on; }; vcc_11: LDO_REG10 { - regulator-name = "LDO_REG10"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; @@ -363,7 +415,7 @@ #address-cells = <1>; #size-cells = <0>; - ingenic,bch-controller = <&bch>; + ecc-engine = <&bch>; ingenic,nemc-tAS = <10>; ingenic,nemc-tAH = <5>; @@ -429,8 +481,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pins_nemc_cs6>; - reg = <6 0 1 /* addr */ - 6 2 1>; /* data */ + reg = <6 0 1>, /* addr */ + <6 2 1>; /* data */ ingenic,nemc-tAS = <15>; ingenic,nemc-tAH = <10>; @@ -442,7 +494,7 @@ vcc-supply = <ð0_power>; interrupt-parent = <&gpe>; - interrupts = <19 4>; + interrupts = <19 IRQ_TYPE_EDGE_RISING>; nvmem-cells = <ð0_addr>; nvmem-cell-names = "mac-address"; diff --git a/arch/mips/boot/dts/ingenic/jz4725b.dtsi b/arch/mips/boot/dts/ingenic/jz4725b.dtsi index e9e48022f631..acbbe8c4664c 100644 --- a/arch/mips/boot/dts/ingenic/jz4725b.dtsi +++ b/arch/mips/boot/dts/ingenic/jz4725b.dtsi @@ -198,11 +198,8 @@ #sound-dai-cells = <0>; - clocks = <&cgu JZ4725B_CLK_AIC>, - <&cgu JZ4725B_CLK_I2S>, - <&cgu JZ4725B_CLK_EXT>, - <&cgu JZ4725B_CLK_PLL_HALF>; - clock-names = "aic", "i2s", "ext", "pll half"; + clocks = <&cgu JZ4725B_CLK_AIC>, <&cgu JZ4725B_CLK_I2S>; + clock-names = "aic", "i2s"; interrupt-parent = <&intc>; interrupts = <10>; diff --git a/arch/mips/boot/dts/ingenic/jz4740.dtsi b/arch/mips/boot/dts/ingenic/jz4740.dtsi index 7f76cba03a08..bdd6f4d82ec9 100644 --- a/arch/mips/boot/dts/ingenic/jz4740.dtsi +++ b/arch/mips/boot/dts/ingenic/jz4740.dtsi @@ -192,11 +192,8 @@ interrupt-parent = <&intc>; interrupts = <18>; - clocks = <&cgu JZ4740_CLK_AIC>, - <&cgu JZ4740_CLK_I2S>, - <&cgu JZ4740_CLK_EXT>, - <&cgu JZ4740_CLK_PLL_HALF>; - clock-names = "aic", "i2s", "ext", "pll half"; + clocks = <&cgu JZ4740_CLK_AIC>, <&cgu JZ4740_CLK_I2S>; + clock-names = "aic", "i2s"; dmas = <&dmac 25 0xffffffff>, <&dmac 24 0xffffffff>; dma-names = "rx", "tx"; diff --git a/arch/mips/boot/dts/ingenic/jz4770.dtsi b/arch/mips/boot/dts/ingenic/jz4770.dtsi index bda0a3a86ed5..9c0099919db7 100644 --- a/arch/mips/boot/dts/ingenic/jz4770.dtsi +++ b/arch/mips/boot/dts/ingenic/jz4770.dtsi @@ -238,9 +238,8 @@ #sound-dai-cells = <0>; - clocks = <&cgu JZ4770_CLK_AIC>, <&cgu JZ4770_CLK_I2S>, - <&cgu JZ4770_CLK_EXT>, <&cgu JZ4770_CLK_PLL0>; - clock-names = "aic", "i2s", "ext", "pll half"; + clocks = <&cgu JZ4770_CLK_AIC>, <&cgu JZ4770_CLK_I2S>; + clock-names = "aic", "i2s"; interrupt-parent = <&intc>; interrupts = <34>; diff --git a/arch/mips/boot/dts/ingenic/qi_lb60.dts b/arch/mips/boot/dts/ingenic/qi_lb60.dts index ba0218971572..24f987244a12 100644 --- a/arch/mips/boot/dts/ingenic/qi_lb60.dts +++ b/arch/mips/boot/dts/ingenic/qi_lb60.dts @@ -27,7 +27,7 @@ stdout-path = &uart0; }; - vcc: regulator@0 { + vcc: regulator-0 { compatible = "regulator-fixed"; regulator-name = "vcc"; @@ -36,7 +36,7 @@ regulator-always-on; }; - mmc_power: regulator@1 { + mmc_power: regulator-1 { compatible = "regulator-fixed"; regulator-name = "mmc_vcc"; gpio = <&gpd 2 0>; @@ -45,7 +45,7 @@ regulator-max-microvolt = <3300000>; }; - amp_supply: regulator@2 { + amp_supply: regulator-2 { compatible = "regulator-fixed"; regulator-name = "amp_supply"; gpio = <&gpd 4 0>; diff --git a/arch/mips/boot/dts/ingenic/x1000.dtsi b/arch/mips/boot/dts/ingenic/x1000.dtsi index 42e69664efd9..cc264cfff826 100644 --- a/arch/mips/boot/dts/ingenic/x1000.dtsi +++ b/arch/mips/boot/dts/ingenic/x1000.dtsi @@ -417,4 +417,22 @@ status = "disabled"; }; + + aic: audio-controller@10020000 { + compatible = "ingenic,x1000-i2s"; + reg = <0x10020000 0x38>; + + #sound-dai-cells = <0>; + + interrupt-parent = <&intc>; + interrupts = <1>; + + clocks = <&cgu X1000_CLK_AIC>, + <&cgu X1000_CLK_I2S>; + clock-names = "aic", "i2s"; + + dmas = <&pdma X1000_DMA_I2S0_RX 0xffffffff>, + <&pdma X1000_DMA_I2S0_TX 0xffffffff>; + dma-names = "rx", "tx"; + }; }; diff --git a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi index 8143a61111e3..f878f47e4501 100644 --- a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi +++ b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi @@ -97,6 +97,13 @@ <0x00000000>; /* int3 */ }; + rtc0: rtc@1fe07800 { + compatible = "loongson,ls2k1000-rtc"; + reg = <0 0x1fe07800 0 0x78>; + interrupt-parent = <&liointc0>; + interrupts = <60 IRQ_TYPE_LEVEL_LOW>; + }; + uart0: serial@1fe00000 { compatible = "ns16550a"; reg = <0 0x1fe00000 0 0x8>; diff --git a/arch/mips/boot/dts/loongson/ls7a-pch.dtsi b/arch/mips/boot/dts/loongson/ls7a-pch.dtsi index 2f45fce2cdc4..7c69e8245c2f 100644 --- a/arch/mips/boot/dts/loongson/ls7a-pch.dtsi +++ b/arch/mips/boot/dts/loongson/ls7a-pch.dtsi @@ -19,6 +19,13 @@ #interrupt-cells = <2>; }; + rtc0: rtc@100d0100 { + compatible = "loongson,ls7a-rtc"; + reg = <0 0x100d0100 0 0x78>; + interrupt-parent = <&pic>; + interrupts = <52 IRQ_TYPE_LEVEL_HIGH>; + }; + ls7a_uart0: serial@10080000 { compatible = "ns16550a"; reg = <0 0x10080000 0 0x100>; diff --git a/arch/mips/boot/dts/ralink/Makefile b/arch/mips/boot/dts/ralink/Makefile index 11732b8c8163..d27d7e8c700f 100644 --- a/arch/mips/boot/dts/ralink/Makefile +++ b/arch/mips/boot/dts/ralink/Makefile @@ -8,6 +8,7 @@ dtb-$(CONFIG_DTB_VOCORE2) += vocore2.dtb dtb-$(CONFIG_SOC_MT7621) += \ mt7621-gnubee-gb-pc1.dtb \ - mt7621-gnubee-gb-pc2.dtb + mt7621-gnubee-gb-pc2.dtb \ + mt7621-tplink-hc220-g5-v1.dtb obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y)) diff --git a/arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dts b/arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dts new file mode 100644 index 000000000000..2d2eadc6b95f --- /dev/null +++ b/arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dts @@ -0,0 +1,84 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/dts-v1/; + +#include "mt7621.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + compatible = "tplink,hc220-g5-v1", "mediatek,mt7621-soc"; + model = "TP-Link HC220 G5 v1"; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>; + }; + + chosen { + bootargs = "earlycon console=ttyS0,115200"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-reset { + label = "reset"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + + key-wps { + label = "wps"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-fault { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_FAULT; + gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; + }; + + led-power { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_POWER; + gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led-wps { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_WPS; + gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&switch0 { + ports { + port@0 { + status = "okay"; + label = "lan2"; + }; + + port@1 { + status = "okay"; + label = "lan1"; + }; + + port@2 { + status = "okay"; + label = "wan"; + }; + }; +}; diff --git a/arch/mips/boot/dts/ralink/mt7628a.dtsi b/arch/mips/boot/dts/ralink/mt7628a.dtsi index 45bf96a3d17a..45a15e005cc4 100644 --- a/arch/mips/boot/dts/ralink/mt7628a.dtsi +++ b/arch/mips/boot/dts/ralink/mt7628a.dtsi @@ -51,85 +51,85 @@ pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0x1>; - pinmux_gpio_gpio: pinmux_gpio_gpio { + pinmux_gpio_gpio: gpio-gpio-pins { pinctrl-single,bits = <0x0 0x0 0x3>; }; - pinmux_spi_cs1_cs: pinmux_spi_cs1_cs { + pinmux_spi_cs1_cs: spi-cs1-cs-pins { pinctrl-single,bits = <0x0 0x0 0x30>; }; - pinmux_i2s_gpio: pinmux_i2s_gpio { + pinmux_i2s_gpio: i2s-gpio-pins { pinctrl-single,bits = <0x0 0x40 0xc0>; }; - pinmux_uart0_uart: pinmux_uart0_uart0 { + pinmux_uart0_uart: uart0-uart0-pins { pinctrl-single,bits = <0x0 0x0 0x300>; }; - pinmux_sdmode_sdxc: pinmux_sdmode_sdxc { + pinmux_sdmode_sdxc: sdmode-sdxc-pins { pinctrl-single,bits = <0x0 0x0 0xc00>; }; - pinmux_sdmode_gpio: pinmux_sdmode_gpio { + pinmux_sdmode_gpio: sdmode-gpio-pins { pinctrl-single,bits = <0x0 0x400 0xc00>; }; - pinmux_spi_spi: pinmux_spi_spi { + pinmux_spi_spi: spi-spi-pins { pinctrl-single,bits = <0x0 0x0 0x1000>; }; - pinmux_refclk_gpio: pinmux_refclk_gpio { + pinmux_refclk_gpio: refclk-gpio-pins { pinctrl-single,bits = <0x0 0x40000 0x40000>; }; - pinmux_i2c_i2c: pinmux_i2c_i2c { + pinmux_i2c_i2c: i2c-i2c-pins { pinctrl-single,bits = <0x0 0x0 0x300000>; }; - pinmux_uart1_uart: pinmux_uart1_uart1 { + pinmux_uart1_uart: uart1-uart1-pins { pinctrl-single,bits = <0x0 0x0 0x3000000>; }; - pinmux_uart2_uart: pinmux_uart2_uart { + pinmux_uart2_uart: uart2-uart-pins { pinctrl-single,bits = <0x0 0x0 0xc000000>; }; - pinmux_pwm0_pwm: pinmux_pwm0_pwm { + pinmux_pwm0_pwm: pwm0-pwm-pins { pinctrl-single,bits = <0x0 0x0 0x30000000>; }; - pinmux_pwm0_gpio: pinmux_pwm0_gpio { + pinmux_pwm0_gpio: pwm0-gpio-pins { pinctrl-single,bits = <0x0 0x10000000 0x30000000>; }; - pinmux_pwm1_pwm: pinmux_pwm1_pwm { + pinmux_pwm1_pwm: pwm1-pwm-pins { pinctrl-single,bits = <0x0 0x0 0xc0000000>; }; - pinmux_pwm1_gpio: pinmux_pwm1_gpio { + pinmux_pwm1_gpio: pwm1-gpio-pins { pinctrl-single,bits = <0x0 0x40000000 0xc0000000>; }; - pinmux_p0led_an_gpio: pinmux_p0led_an_gpio { + pinmux_p0led_an_gpio: p0led-an-gpio-pins { pinctrl-single,bits = <0x4 0x4 0xc>; }; - pinmux_p1led_an_gpio: pinmux_p1led_an_gpio { + pinmux_p1led_an_gpio: p1led-an-gpio-pins { pinctrl-single,bits = <0x4 0x10 0x30>; }; - pinmux_p2led_an_gpio: pinmux_p2led_an_gpio { + pinmux_p2led_an_gpio: p2led-an-gpio-pins { pinctrl-single,bits = <0x4 0x40 0xc0>; }; - pinmux_p3led_an_gpio: pinmux_p3led_an_gpio { + pinmux_p3led_an_gpio: p3led-an-gpio-pins { pinctrl-single,bits = <0x4 0x100 0x300>; }; - pinmux_p4led_an_gpio: pinmux_p4led_an_gpio { + pinmux_p4led_an_gpio: p4led-an-gpio-pins { pinctrl-single,bits = <0x4 0x400 0xc00>; }; }; diff --git a/arch/mips/cavium-octeon/octeon-usb.c b/arch/mips/cavium-octeon/octeon-usb.c index 28677c615175..2add435ad038 100644 --- a/arch/mips/cavium-octeon/octeon-usb.c +++ b/arch/mips/cavium-octeon/octeon-usb.c @@ -8,232 +8,255 @@ * for more details. */ -#include <linux/module.h> +#include <linux/bitfield.h> +#include <linux/bits.h> #include <linux/device.h> -#include <linux/mutex.h> #include <linux/delay.h> -#include <linux/of_platform.h> #include <linux/io.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/of_platform.h> -#include <asm/octeon/octeon.h> +/* + * USB Control Register + */ +#define USBDRD_UCTL_CTL 0x00 +/* BIST fast-clear mode select. A BIST run with this bit set + * clears all entries in USBH RAMs to 0x0. + */ +# define USBDRD_UCTL_CTL_CLEAR_BIST BIT(63) +/* 1 = Start BIST and cleared by hardware */ +# define USBDRD_UCTL_CTL_START_BIST BIT(62) +/* Reference clock select for SuperSpeed and HighSpeed PLLs: + * 0x0 = Both PLLs use DLMC_REF_CLK0 for reference clock + * 0x1 = Both PLLs use DLMC_REF_CLK1 for reference clock + * 0x2 = SuperSpeed PLL uses DLMC_REF_CLK0 for reference clock & + * HighSpeed PLL uses PLL_REF_CLK for reference clck + * 0x3 = SuperSpeed PLL uses DLMC_REF_CLK1 for reference clock & + * HighSpeed PLL uses PLL_REF_CLK for reference clck + */ +# define USBDRD_UCTL_CTL_REF_CLK_SEL GENMASK(61, 60) +/* 1 = Spread-spectrum clock enable, 0 = SS clock disable */ +# define USBDRD_UCTL_CTL_SSC_EN BIT(59) +/* Spread-spectrum clock modulation range: + * 0x0 = -4980 ppm downspread + * 0x1 = -4492 ppm downspread + * 0x2 = -4003 ppm downspread + * 0x3 - 0x7 = Reserved + */ +# define USBDRD_UCTL_CTL_SSC_RANGE GENMASK(58, 56) +/* Enable non-standard oscillator frequencies: + * [55:53] = modules -1 + * [52:47] = 2's complement push amount, 0 = Feature disabled + */ +# define USBDRD_UCTL_CTL_SSC_REF_CLK_SEL GENMASK(55, 47) +/* Reference clock multiplier for non-standard frequencies: + * 0x19 = 100MHz on DLMC_REF_CLK* if REF_CLK_SEL = 0x0 or 0x1 + * 0x28 = 125MHz on DLMC_REF_CLK* if REF_CLK_SEL = 0x0 or 0x1 + * 0x32 = 50MHz on DLMC_REF_CLK* if REF_CLK_SEL = 0x0 or 0x1 + * Other Values = Reserved + */ +# define USBDRD_UCTL_CTL_MPLL_MULTIPLIER GENMASK(46, 40) +/* Enable reference clock to prescaler for SuperSpeed functionality. + * Should always be set to "1" + */ +# define USBDRD_UCTL_CTL_REF_SSP_EN BIT(39) +/* Divide the reference clock by 2 before entering the + * REF_CLK_FSEL divider: + * If REF_CLK_SEL = 0x0 or 0x1, then only 0x0 is legal + * If REF_CLK_SEL = 0x2 or 0x3, then: + * 0x1 = DLMC_REF_CLK* is 125MHz + * 0x0 = DLMC_REF_CLK* is another supported frequency + */ +# define USBDRD_UCTL_CTL_REF_CLK_DIV2 BIT(38) +/* Select reference clock freqnuency for both PLL blocks: + * 0x27 = REF_CLK_SEL is 0x0 or 0x1 + * 0x07 = REF_CLK_SEL is 0x2 or 0x3 + */ +# define USBDRD_UCTL_CTL_REF_CLK_FSEL GENMASK(37, 32) +/* Controller clock enable. */ +# define USBDRD_UCTL_CTL_H_CLK_EN BIT(30) +/* Select bypass input to controller clock divider: + * 0x0 = Use divided coprocessor clock from H_CLKDIV + * 0x1 = Use clock from GPIO pins + */ +# define USBDRD_UCTL_CTL_H_CLK_BYP_SEL BIT(29) +/* Reset controller clock divider. */ +# define USBDRD_UCTL_CTL_H_CLKDIV_RST BIT(28) +/* Clock divider select: + * 0x0 = divide by 1 + * 0x1 = divide by 2 + * 0x2 = divide by 4 + * 0x3 = divide by 6 + * 0x4 = divide by 8 + * 0x5 = divide by 16 + * 0x6 = divide by 24 + * 0x7 = divide by 32 + */ +# define USBDRD_UCTL_CTL_H_CLKDIV_SEL GENMASK(26, 24) +/* USB3 port permanently attached: 0x0 = No, 0x1 = Yes */ +# define USBDRD_UCTL_CTL_USB3_PORT_PERM_ATTACH BIT(21) +/* USB2 port permanently attached: 0x0 = No, 0x1 = Yes */ +# define USBDRD_UCTL_CTL_USB2_PORT_PERM_ATTACH BIT(20) +/* Disable SuperSpeed PHY: 0x0 = No, 0x1 = Yes */ +# define USBDRD_UCTL_CTL_USB3_PORT_DISABLE BIT(18) +/* Disable HighSpeed PHY: 0x0 = No, 0x1 = Yes */ +# define USBDRD_UCTL_CTL_USB2_PORT_DISABLE BIT(16) +/* Enable PHY SuperSpeed block power: 0x0 = No, 0x1 = Yes */ +# define USBDRD_UCTL_CTL_SS_POWER_EN BIT(14) +/* Enable PHY HighSpeed block power: 0x0 = No, 0x1 = Yes */ +# define USBDRD_UCTL_CTL_HS_POWER_EN BIT(12) +/* Enable USB UCTL interface clock: 0xx = No, 0x1 = Yes */ +# define USBDRD_UCTL_CTL_CSCLK_EN BIT(4) +/* Controller mode: 0x0 = Host, 0x1 = Device */ +# define USBDRD_UCTL_CTL_DRD_MODE BIT(3) +/* PHY reset */ +# define USBDRD_UCTL_CTL_UPHY_RST BIT(2) +/* Software reset UAHC */ +# define USBDRD_UCTL_CTL_UAHC_RST BIT(1) +/* Software resets UCTL */ +# define USBDRD_UCTL_CTL_UCTL_RST BIT(0) + +#define USBDRD_UCTL_BIST_STATUS 0x08 +#define USBDRD_UCTL_SPARE0 0x10 +#define USBDRD_UCTL_INTSTAT 0x30 +#define USBDRD_UCTL_PORT_CFG_HS(port) (0x40 + (0x20 * port)) +#define USBDRD_UCTL_PORT_CFG_SS(port) (0x48 + (0x20 * port)) +#define USBDRD_UCTL_PORT_CR_DBG_CFG(port) (0x50 + (0x20 * port)) +#define USBDRD_UCTL_PORT_CR_DBG_STATUS(port) (0x58 + (0x20 * port)) -/* USB Control Register */ -union cvm_usbdrd_uctl_ctl { - uint64_t u64; - struct cvm_usbdrd_uctl_ctl_s { - /* 1 = BIST and set all USB RAMs to 0x0, 0 = BIST */ - __BITFIELD_FIELD(uint64_t clear_bist:1, - /* 1 = Start BIST and cleared by hardware */ - __BITFIELD_FIELD(uint64_t start_bist:1, - /* Reference clock select for SuperSpeed and HighSpeed PLLs: - * 0x0 = Both PLLs use DLMC_REF_CLK0 for reference clock - * 0x1 = Both PLLs use DLMC_REF_CLK1 for reference clock - * 0x2 = SuperSpeed PLL uses DLMC_REF_CLK0 for reference clock & - * HighSpeed PLL uses PLL_REF_CLK for reference clck - * 0x3 = SuperSpeed PLL uses DLMC_REF_CLK1 for reference clock & - * HighSpeed PLL uses PLL_REF_CLK for reference clck - */ - __BITFIELD_FIELD(uint64_t ref_clk_sel:2, - /* 1 = Spread-spectrum clock enable, 0 = SS clock disable */ - __BITFIELD_FIELD(uint64_t ssc_en:1, - /* Spread-spectrum clock modulation range: - * 0x0 = -4980 ppm downspread - * 0x1 = -4492 ppm downspread - * 0x2 = -4003 ppm downspread - * 0x3 - 0x7 = Reserved - */ - __BITFIELD_FIELD(uint64_t ssc_range:3, - /* Enable non-standard oscillator frequencies: - * [55:53] = modules -1 - * [52:47] = 2's complement push amount, 0 = Feature disabled - */ - __BITFIELD_FIELD(uint64_t ssc_ref_clk_sel:9, - /* Reference clock multiplier for non-standard frequencies: - * 0x19 = 100MHz on DLMC_REF_CLK* if REF_CLK_SEL = 0x0 or 0x1 - * 0x28 = 125MHz on DLMC_REF_CLK* if REF_CLK_SEL = 0x0 or 0x1 - * 0x32 = 50MHz on DLMC_REF_CLK* if REF_CLK_SEL = 0x0 or 0x1 - * Other Values = Reserved - */ - __BITFIELD_FIELD(uint64_t mpll_multiplier:7, - /* Enable reference clock to prescaler for SuperSpeed functionality. - * Should always be set to "1" - */ - __BITFIELD_FIELD(uint64_t ref_ssp_en:1, - /* Divide the reference clock by 2 before entering the - * REF_CLK_FSEL divider: - * If REF_CLK_SEL = 0x0 or 0x1, then only 0x0 is legal - * If REF_CLK_SEL = 0x2 or 0x3, then: - * 0x1 = DLMC_REF_CLK* is 125MHz - * 0x0 = DLMC_REF_CLK* is another supported frequency - */ - __BITFIELD_FIELD(uint64_t ref_clk_div2:1, - /* Select reference clock freqnuency for both PLL blocks: - * 0x27 = REF_CLK_SEL is 0x0 or 0x1 - * 0x07 = REF_CLK_SEL is 0x2 or 0x3 - */ - __BITFIELD_FIELD(uint64_t ref_clk_fsel:6, - /* Reserved */ - __BITFIELD_FIELD(uint64_t reserved_31_31:1, - /* Controller clock enable. */ - __BITFIELD_FIELD(uint64_t h_clk_en:1, - /* Select bypass input to controller clock divider: - * 0x0 = Use divided coprocessor clock from H_CLKDIV - * 0x1 = Use clock from GPIO pins - */ - __BITFIELD_FIELD(uint64_t h_clk_byp_sel:1, - /* Reset controller clock divider. */ - __BITFIELD_FIELD(uint64_t h_clkdiv_rst:1, - /* Reserved */ - __BITFIELD_FIELD(uint64_t reserved_27_27:1, - /* Clock divider select: - * 0x0 = divide by 1 - * 0x1 = divide by 2 - * 0x2 = divide by 4 - * 0x3 = divide by 6 - * 0x4 = divide by 8 - * 0x5 = divide by 16 - * 0x6 = divide by 24 - * 0x7 = divide by 32 - */ - __BITFIELD_FIELD(uint64_t h_clkdiv_sel:3, - /* Reserved */ - __BITFIELD_FIELD(uint64_t reserved_22_23:2, - /* USB3 port permanently attached: 0x0 = No, 0x1 = Yes */ - __BITFIELD_FIELD(uint64_t usb3_port_perm_attach:1, - /* USB2 port permanently attached: 0x0 = No, 0x1 = Yes */ - __BITFIELD_FIELD(uint64_t usb2_port_perm_attach:1, - /* Reserved */ - __BITFIELD_FIELD(uint64_t reserved_19_19:1, - /* Disable SuperSpeed PHY: 0x0 = No, 0x1 = Yes */ - __BITFIELD_FIELD(uint64_t usb3_port_disable:1, - /* Reserved */ - __BITFIELD_FIELD(uint64_t reserved_17_17:1, - /* Disable HighSpeed PHY: 0x0 = No, 0x1 = Yes */ - __BITFIELD_FIELD(uint64_t usb2_port_disable:1, - /* Reserved */ - __BITFIELD_FIELD(uint64_t reserved_15_15:1, - /* Enable PHY SuperSpeed block power: 0x0 = No, 0x1 = Yes */ - __BITFIELD_FIELD(uint64_t ss_power_en:1, - /* Reserved */ - __BITFIELD_FIELD(uint64_t reserved_13_13:1, - /* Enable PHY HighSpeed block power: 0x0 = No, 0x1 = Yes */ - __BITFIELD_FIELD(uint64_t hs_power_en:1, - /* Reserved */ - __BITFIELD_FIELD(uint64_t reserved_5_11:7, - /* Enable USB UCTL interface clock: 0xx = No, 0x1 = Yes */ - __BITFIELD_FIELD(uint64_t csclk_en:1, - /* Controller mode: 0x0 = Host, 0x1 = Device */ - __BITFIELD_FIELD(uint64_t drd_mode:1, - /* PHY reset */ - __BITFIELD_FIELD(uint64_t uphy_rst:1, - /* Software reset UAHC */ - __BITFIELD_FIELD(uint64_t uahc_rst:1, - /* Software resets UCTL */ - __BITFIELD_FIELD(uint64_t uctl_rst:1, - ;))))))))))))))))))))))))))))))))) - } s; -}; - -/* UAHC Configuration Register */ -union cvm_usbdrd_uctl_host_cfg { - uint64_t u64; - struct cvm_usbdrd_uctl_host_cfg_s { - /* Reserved */ - __BITFIELD_FIELD(uint64_t reserved_60_63:4, - /* Indicates minimum value of all received BELT values */ - __BITFIELD_FIELD(uint64_t host_current_belt:12, - /* Reserved */ - __BITFIELD_FIELD(uint64_t reserved_38_47:10, - /* HS jitter adjustment */ - __BITFIELD_FIELD(uint64_t fla:6, - /* Reserved */ - __BITFIELD_FIELD(uint64_t reserved_29_31:3, - /* Bus-master enable: 0x0 = Disabled (stall DMAs), 0x1 = enabled */ - __BITFIELD_FIELD(uint64_t bme:1, - /* Overcurrent protection enable: 0x0 = unavailable, 0x1 = available */ - __BITFIELD_FIELD(uint64_t oci_en:1, - /* Overcurrent sene selection: - * 0x0 = Overcurrent indication from off-chip is active-low - * 0x1 = Overcurrent indication from off-chip is active-high - */ - __BITFIELD_FIELD(uint64_t oci_active_high_en:1, - /* Port power control enable: 0x0 = unavailable, 0x1 = available */ - __BITFIELD_FIELD(uint64_t ppc_en:1, - /* Port power control sense selection: - * 0x0 = Port power to off-chip is active-low - * 0x1 = Port power to off-chip is active-high - */ - __BITFIELD_FIELD(uint64_t ppc_active_high_en:1, - /* Reserved */ - __BITFIELD_FIELD(uint64_t reserved_0_23:24, - ;))))))))))) - } s; -}; - -/* UCTL Shim Features Register */ -union cvm_usbdrd_uctl_shim_cfg { - uint64_t u64; - struct cvm_usbdrd_uctl_shim_cfg_s { - /* Out-of-bound UAHC register access: 0 = read, 1 = write */ - __BITFIELD_FIELD(uint64_t xs_ncb_oob_wrn:1, - /* Reserved */ - __BITFIELD_FIELD(uint64_t reserved_60_62:3, - /* SRCID error log for out-of-bound UAHC register access: - * [59:58] = chipID - * [57] = Request source: 0 = core, 1 = NCB-device - * [56:51] = Core/NCB-device number, [56] always 0 for NCB devices - * [50:48] = SubID - */ - __BITFIELD_FIELD(uint64_t xs_ncb_oob_osrc:12, - /* Error log for bad UAHC DMA access: 0 = Read log, 1 = Write log */ - __BITFIELD_FIELD(uint64_t xm_bad_dma_wrn:1, - /* Reserved */ - __BITFIELD_FIELD(uint64_t reserved_44_46:3, - /* Encoded error type for bad UAHC DMA */ - __BITFIELD_FIELD(uint64_t xm_bad_dma_type:4, - /* Reserved */ - __BITFIELD_FIELD(uint64_t reserved_13_39:27, - /* Select the IOI read command used by DMA accesses */ - __BITFIELD_FIELD(uint64_t dma_read_cmd:1, - /* Reserved */ - __BITFIELD_FIELD(uint64_t reserved_10_11:2, - /* Select endian format for DMA accesses to the L2c: - * 0x0 = Little endian - *` 0x1 = Big endian - * 0x2 = Reserved - * 0x3 = Reserved - */ - __BITFIELD_FIELD(uint64_t dma_endian_mode:2, - /* Reserved */ - __BITFIELD_FIELD(uint64_t reserved_2_7:6, - /* Select endian format for IOI CSR access to UAHC: - * 0x0 = Little endian - *` 0x1 = Big endian - * 0x2 = Reserved - * 0x3 = Reserved - */ - __BITFIELD_FIELD(uint64_t csr_endian_mode:2, - ;)))))))))))) - } s; -}; +/* + * UCTL Configuration Register + */ +#define USBDRD_UCTL_HOST_CFG 0xe0 +/* Indicates minimum value of all received BELT values */ +# define USBDRD_UCTL_HOST_CFG_HOST_CURRENT_BELT GENMASK(59, 48) +/* HS jitter adjustment */ +# define USBDRD_UCTL_HOST_CFG_FLA GENMASK(37, 32) +/* Bus-master enable: 0x0 = Disabled (stall DMAs), 0x1 = enabled */ +# define USBDRD_UCTL_HOST_CFG_BME BIT(28) +/* Overcurrent protection enable: 0x0 = unavailable, 0x1 = available */ +# define USBDRD_UCTL_HOST_OCI_EN BIT(27) +/* Overcurrent sene selection: + * 0x0 = Overcurrent indication from off-chip is active-low + * 0x1 = Overcurrent indication from off-chip is active-high + */ +# define USBDRD_UCTL_HOST_OCI_ACTIVE_HIGH_EN BIT(26) +/* Port power control enable: 0x0 = unavailable, 0x1 = available */ +# define USBDRD_UCTL_HOST_PPC_EN BIT(25) +/* Port power control sense selection: + * 0x0 = Port power to off-chip is active-low + * 0x1 = Port power to off-chip is active-high + */ +# define USBDRD_UCTL_HOST_PPC_ACTIVE_HIGH_EN BIT(24) + +/* + * UCTL Shim Features Register + */ +#define USBDRD_UCTL_SHIM_CFG 0xe8 +/* Out-of-bound UAHC register access: 0 = read, 1 = write */ +# define USBDRD_UCTL_SHIM_CFG_XS_NCB_OOB_WRN BIT(63) +/* SRCID error log for out-of-bound UAHC register access: + * [59:58] = chipID + * [57] = Request source: 0 = core, 1 = NCB-device + * [56:51] = Core/NCB-device number, [56] always 0 for NCB devices + * [50:48] = SubID + */ +# define USBDRD_UCTL_SHIM_CFG_XS_NCB_OOB_OSRC GENMASK(59, 48) +/* Error log for bad UAHC DMA access: 0 = Read log, 1 = Write log */ +# define USBDRD_UCTL_SHIM_CFG_XM_BAD_DMA_WRN BIT(47) +/* Encoded error type for bad UAHC DMA */ +# define USBDRD_UCTL_SHIM_CFG_XM_BAD_DMA_TYPE GENMASK(43, 40) +/* Select the IOI read command used by DMA accesses */ +# define USBDRD_UCTL_SHIM_CFG_DMA_READ_CMD BIT(12) +/* Select endian format for DMA accesses to the L2C: + * 0x0 = Little endian + * 0x1 = Big endian + * 0x2 = Reserved + * 0x3 = Reserved + */ +# define USBDRD_UCTL_SHIM_CFG_DMA_ENDIAN_MODE GENMASK(9, 8) +/* Select endian format for IOI CSR access to UAHC: + * 0x0 = Little endian + * 0x1 = Big endian + * 0x2 = Reserved + * 0x3 = Reserved + */ +# define USBDRD_UCTL_SHIM_CFG_CSR_ENDIAN_MODE GENMASK(1, 0) -#define OCTEON_H_CLKDIV_SEL 8 -#define OCTEON_MIN_H_CLK_RATE 150000000 -#define OCTEON_MAX_H_CLK_RATE 300000000 +#define USBDRD_UCTL_ECC 0xf0 +#define USBDRD_UCTL_SPARE1 0xf8 static DEFINE_MUTEX(dwc3_octeon_clocks_mutex); -static uint8_t clk_div[OCTEON_H_CLKDIV_SEL] = {1, 2, 4, 6, 8, 16, 24, 32}; +#ifdef CONFIG_CAVIUM_OCTEON_SOC +#include <asm/octeon/octeon.h> +static inline uint64_t dwc3_octeon_readq(void __iomem *addr) +{ + return cvmx_readq_csr(addr); +} -static int dwc3_octeon_config_power(struct device *dev, u64 base) +static inline void dwc3_octeon_writeq(void __iomem *base, uint64_t val) +{ + cvmx_writeq_csr(base, val); +} + +static void dwc3_octeon_config_gpio(int index, int gpio) { -#define UCTL_HOST_CFG 0xe0 - union cvm_usbdrd_uctl_host_cfg uctl_host_cfg; union cvmx_gpio_bit_cfgx gpio_bit; + + if ((OCTEON_IS_MODEL(OCTEON_CN73XX) || + OCTEON_IS_MODEL(OCTEON_CNF75XX)) + && gpio <= 31) { + gpio_bit.u64 = cvmx_read_csr(CVMX_GPIO_BIT_CFGX(gpio)); + gpio_bit.s.tx_oe = 1; + gpio_bit.s.output_sel = (index == 0 ? 0x14 : 0x15); + cvmx_write_csr(CVMX_GPIO_BIT_CFGX(gpio), gpio_bit.u64); + } else if (gpio <= 15) { + gpio_bit.u64 = cvmx_read_csr(CVMX_GPIO_BIT_CFGX(gpio)); + gpio_bit.s.tx_oe = 1; + gpio_bit.s.output_sel = (index == 0 ? 0x14 : 0x19); + cvmx_write_csr(CVMX_GPIO_BIT_CFGX(gpio), gpio_bit.u64); + } else { + gpio_bit.u64 = cvmx_read_csr(CVMX_GPIO_XBIT_CFGX(gpio)); + gpio_bit.s.tx_oe = 1; + gpio_bit.s.output_sel = (index == 0 ? 0x14 : 0x19); + cvmx_write_csr(CVMX_GPIO_XBIT_CFGX(gpio), gpio_bit.u64); + } +} +#else +static inline uint64_t dwc3_octeon_readq(void __iomem *addr) +{ + return 0; +} + +static inline void dwc3_octeon_writeq(void __iomem *base, uint64_t val) { } + +static inline void dwc3_octeon_config_gpio(int index, int gpio) { } +#endif + +static int dwc3_octeon_get_divider(void) +{ + static const uint8_t clk_div[] = { 1, 2, 4, 6, 8, 16, 24, 32 }; + int div = 0; + + while (div < ARRAY_SIZE(clk_div)) { + uint64_t rate = octeon_get_io_clock_rate() / clk_div[div]; + if (rate <= 300000000 && rate >= 150000000) + break; + div++; + } + + return div; +} + +static int dwc3_octeon_config_power(struct device *dev, void __iomem *base) +{ uint32_t gpio_pwr[3]; int gpio, len, power_active_low; struct device_node *node = dev->of_node; - int index = (base >> 24) & 1; + u64 val; + void __iomem *uctl_host_cfg_reg = base + USBDRD_UCTL_HOST_CFG; if (of_find_property(node, "power", &len) != NULL) { if (len == 12) { @@ -248,51 +271,33 @@ static int dwc3_octeon_config_power(struct device *dev, u64 base) dev_err(dev, "invalid power configuration\n"); return -EINVAL; } - if ((OCTEON_IS_MODEL(OCTEON_CN73XX) || - OCTEON_IS_MODEL(OCTEON_CNF75XX)) - && gpio <= 31) { - gpio_bit.u64 = cvmx_read_csr(CVMX_GPIO_BIT_CFGX(gpio)); - gpio_bit.s.tx_oe = 1; - gpio_bit.s.output_sel = (index == 0 ? 0x14 : 0x15); - cvmx_write_csr(CVMX_GPIO_BIT_CFGX(gpio), gpio_bit.u64); - } else if (gpio <= 15) { - gpio_bit.u64 = cvmx_read_csr(CVMX_GPIO_BIT_CFGX(gpio)); - gpio_bit.s.tx_oe = 1; - gpio_bit.s.output_sel = (index == 0 ? 0x14 : 0x19); - cvmx_write_csr(CVMX_GPIO_BIT_CFGX(gpio), gpio_bit.u64); - } else { - gpio_bit.u64 = cvmx_read_csr(CVMX_GPIO_XBIT_CFGX(gpio)); - gpio_bit.s.tx_oe = 1; - gpio_bit.s.output_sel = (index == 0 ? 0x14 : 0x19); - cvmx_write_csr(CVMX_GPIO_XBIT_CFGX(gpio), gpio_bit.u64); - } + dwc3_octeon_config_gpio(((u64)base >> 24) & 1, gpio); /* Enable XHCI power control and set if active high or low. */ - uctl_host_cfg.u64 = cvmx_read_csr(base + UCTL_HOST_CFG); - uctl_host_cfg.s.ppc_en = 1; - uctl_host_cfg.s.ppc_active_high_en = !power_active_low; - cvmx_write_csr(base + UCTL_HOST_CFG, uctl_host_cfg.u64); + val = dwc3_octeon_readq(uctl_host_cfg_reg); + val |= USBDRD_UCTL_HOST_PPC_EN; + if (power_active_low) + val &= ~USBDRD_UCTL_HOST_PPC_ACTIVE_HIGH_EN; + else + val |= USBDRD_UCTL_HOST_PPC_ACTIVE_HIGH_EN; + dwc3_octeon_writeq(uctl_host_cfg_reg, val); } else { /* Disable XHCI power control and set if active high. */ - uctl_host_cfg.u64 = cvmx_read_csr(base + UCTL_HOST_CFG); - uctl_host_cfg.s.ppc_en = 0; - uctl_host_cfg.s.ppc_active_high_en = 0; - cvmx_write_csr(base + UCTL_HOST_CFG, uctl_host_cfg.u64); + val = dwc3_octeon_readq(uctl_host_cfg_reg); + val &= ~USBDRD_UCTL_HOST_PPC_EN; + val &= ~USBDRD_UCTL_HOST_PPC_ACTIVE_HIGH_EN; + dwc3_octeon_writeq(uctl_host_cfg_reg, val); dev_info(dev, "power control disabled\n"); } return 0; } -static int dwc3_octeon_clocks_start(struct device *dev, u64 base) +static int dwc3_octeon_clocks_start(struct device *dev, void __iomem *base) { - union cvm_usbdrd_uctl_ctl uctl_ctl; - int ref_clk_sel = 2; - u64 div; + int i, div, mpll_mul, ref_clk_fsel, ref_clk_sel = 2; u32 clock_rate; - int mpll_mul; - int i; - u64 h_clk_rate; - u64 uctl_ctl_reg = base; + u64 val; + void __iomem *uctl_ctl_reg = base + USBDRD_UCTL_CTL; if (dev->of_node) { const char *ss_clock_type; @@ -356,44 +361,42 @@ static int dwc3_octeon_clocks_start(struct device *dev, u64 base) /* Step 2: Select GPIO for overcurrent indication, if desired. SKIP */ /* Step 3: Assert all resets. */ - uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg); - uctl_ctl.s.uphy_rst = 1; - uctl_ctl.s.uahc_rst = 1; - uctl_ctl.s.uctl_rst = 1; - cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64); + val = dwc3_octeon_readq(uctl_ctl_reg); + val |= USBDRD_UCTL_CTL_UPHY_RST | + USBDRD_UCTL_CTL_UAHC_RST | + USBDRD_UCTL_CTL_UCTL_RST; + dwc3_octeon_writeq(uctl_ctl_reg, val); /* Step 4a: Reset the clock dividers. */ - uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg); - uctl_ctl.s.h_clkdiv_rst = 1; - cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64); + val = dwc3_octeon_readq(uctl_ctl_reg); + val |= USBDRD_UCTL_CTL_H_CLKDIV_RST; + dwc3_octeon_writeq(uctl_ctl_reg, val); /* Step 4b: Select controller clock frequency. */ - for (div = 0; div < OCTEON_H_CLKDIV_SEL; div++) { - h_clk_rate = octeon_get_io_clock_rate() / clk_div[div]; - if (h_clk_rate <= OCTEON_MAX_H_CLK_RATE && - h_clk_rate >= OCTEON_MIN_H_CLK_RATE) - break; - } - uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg); - uctl_ctl.s.h_clkdiv_sel = div; - uctl_ctl.s.h_clk_en = 1; - cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64); - uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg); - if ((div != uctl_ctl.s.h_clkdiv_sel) || (!uctl_ctl.s.h_clk_en)) { + div = dwc3_octeon_get_divider(); + val = dwc3_octeon_readq(uctl_ctl_reg); + val &= ~USBDRD_UCTL_CTL_H_CLKDIV_SEL; + val |= FIELD_PREP(USBDRD_UCTL_CTL_H_CLKDIV_SEL, div); + val |= USBDRD_UCTL_CTL_H_CLK_EN; + dwc3_octeon_writeq(uctl_ctl_reg, val); + val = dwc3_octeon_readq(uctl_ctl_reg); + if ((div != FIELD_GET(USBDRD_UCTL_CTL_H_CLKDIV_SEL, val)) || + (!(FIELD_GET(USBDRD_UCTL_CTL_H_CLK_EN, val)))) { dev_err(dev, "dwc3 controller clock init failure.\n"); return -EINVAL; } /* Step 4c: Deassert the controller clock divider reset. */ - uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg); - uctl_ctl.s.h_clkdiv_rst = 0; - cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64); + val &= ~USBDRD_UCTL_CTL_H_CLKDIV_RST; + dwc3_octeon_writeq(uctl_ctl_reg, val); /* Step 5a: Reference clock configuration. */ - uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg); - uctl_ctl.s.ref_clk_sel = ref_clk_sel; - uctl_ctl.s.ref_clk_fsel = 0x07; - uctl_ctl.s.ref_clk_div2 = 0; + val = dwc3_octeon_readq(uctl_ctl_reg); + val &= ~USBDRD_UCTL_CTL_REF_CLK_DIV2; + val &= ~USBDRD_UCTL_CTL_REF_CLK_SEL; + val |= FIELD_PREP(USBDRD_UCTL_CTL_REF_CLK_SEL, ref_clk_sel); + + ref_clk_fsel = 0x07; switch (clock_rate) { default: dev_warn(dev, "Invalid ref_clk %u, using 100000000 instead\n", @@ -402,7 +405,7 @@ static int dwc3_octeon_clocks_start(struct device *dev, u64 base) case 100000000: mpll_mul = 0x19; if (ref_clk_sel < 2) - uctl_ctl.s.ref_clk_fsel = 0x27; + ref_clk_fsel = 0x27; break; case 50000000: mpll_mul = 0x32; @@ -411,28 +414,32 @@ static int dwc3_octeon_clocks_start(struct device *dev, u64 base) mpll_mul = 0x28; break; } - uctl_ctl.s.mpll_multiplier = mpll_mul; + val &= ~USBDRD_UCTL_CTL_REF_CLK_FSEL; + val |= FIELD_PREP(USBDRD_UCTL_CTL_REF_CLK_FSEL, ref_clk_fsel); + + val &= ~USBDRD_UCTL_CTL_MPLL_MULTIPLIER; + val |= FIELD_PREP(USBDRD_UCTL_CTL_MPLL_MULTIPLIER, mpll_mul); /* Step 5b: Configure and enable spread-spectrum for SuperSpeed. */ - uctl_ctl.s.ssc_en = 1; + val |= USBDRD_UCTL_CTL_SSC_EN; /* Step 5c: Enable SuperSpeed. */ - uctl_ctl.s.ref_ssp_en = 1; + val |= USBDRD_UCTL_CTL_REF_SSP_EN; /* Step 5d: Configure PHYs. SKIP */ /* Step 6a & 6b: Power up PHYs. */ - uctl_ctl.s.hs_power_en = 1; - uctl_ctl.s.ss_power_en = 1; - cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64); + val |= USBDRD_UCTL_CTL_HS_POWER_EN; + val |= USBDRD_UCTL_CTL_SS_POWER_EN; + dwc3_octeon_writeq(uctl_ctl_reg, val); /* Step 7: Wait 10 controller-clock cycles to take effect. */ udelay(10); /* Step 8a: Deassert UCTL reset signal. */ - uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg); - uctl_ctl.s.uctl_rst = 0; - cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64); + val = dwc3_octeon_readq(uctl_ctl_reg); + val &= ~USBDRD_UCTL_CTL_UCTL_RST; + dwc3_octeon_writeq(uctl_ctl_reg, val); /* Step 8b: Wait 10 controller-clock cycles. */ udelay(10); @@ -442,53 +449,49 @@ static int dwc3_octeon_clocks_start(struct device *dev, u64 base) return -EINVAL; /* Step 8d: Deassert UAHC reset signal. */ - uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg); - uctl_ctl.s.uahc_rst = 0; - cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64); + val = dwc3_octeon_readq(uctl_ctl_reg); + val &= ~USBDRD_UCTL_CTL_UAHC_RST; + dwc3_octeon_writeq(uctl_ctl_reg, val); /* Step 8e: Wait 10 controller-clock cycles. */ udelay(10); /* Step 9: Enable conditional coprocessor clock of UCTL. */ - uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg); - uctl_ctl.s.csclk_en = 1; - cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64); + val = dwc3_octeon_readq(uctl_ctl_reg); + val |= USBDRD_UCTL_CTL_CSCLK_EN; + dwc3_octeon_writeq(uctl_ctl_reg, val); /*Step 10: Set for host mode only. */ - uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg); - uctl_ctl.s.drd_mode = 0; - cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64); + val = dwc3_octeon_readq(uctl_ctl_reg); + val &= ~USBDRD_UCTL_CTL_DRD_MODE; + dwc3_octeon_writeq(uctl_ctl_reg, val); return 0; } -static void __init dwc3_octeon_set_endian_mode(u64 base) +static void __init dwc3_octeon_set_endian_mode(void __iomem *base) { -#define UCTL_SHIM_CFG 0xe8 - union cvm_usbdrd_uctl_shim_cfg shim_cfg; + u64 val; + void __iomem *uctl_shim_cfg_reg = base + USBDRD_UCTL_SHIM_CFG; - shim_cfg.u64 = cvmx_read_csr(base + UCTL_SHIM_CFG); + val = dwc3_octeon_readq(uctl_shim_cfg_reg); + val &= ~USBDRD_UCTL_SHIM_CFG_DMA_ENDIAN_MODE; + val &= ~USBDRD_UCTL_SHIM_CFG_CSR_ENDIAN_MODE; #ifdef __BIG_ENDIAN - shim_cfg.s.dma_endian_mode = 1; - shim_cfg.s.csr_endian_mode = 1; -#else - shim_cfg.s.dma_endian_mode = 0; - shim_cfg.s.csr_endian_mode = 0; + val |= FIELD_PREP(USBDRD_UCTL_SHIM_CFG_DMA_ENDIAN_MODE, 1); + val |= FIELD_PREP(USBDRD_UCTL_SHIM_CFG_CSR_ENDIAN_MODE, 1); #endif - cvmx_write_csr(base + UCTL_SHIM_CFG, shim_cfg.u64); + dwc3_octeon_writeq(uctl_shim_cfg_reg, val); } -#define CVMX_USBDRDX_UCTL_CTL(index) \ - (CVMX_ADD_IO_SEG(0x0001180068000000ull) + \ - ((index & 1) * 0x1000000ull)) -static void __init dwc3_octeon_phy_reset(u64 base) +static void __init dwc3_octeon_phy_reset(void __iomem *base) { - union cvm_usbdrd_uctl_ctl uctl_ctl; - int index = (base >> 24) & 1; + u64 val; + void __iomem *uctl_ctl_reg = base + USBDRD_UCTL_CTL; - uctl_ctl.u64 = cvmx_read_csr(CVMX_USBDRDX_UCTL_CTL(index)); - uctl_ctl.s.uphy_rst = 0; - cvmx_write_csr(CVMX_USBDRDX_UCTL_CTL(index), uctl_ctl.u64); + val = dwc3_octeon_readq(uctl_ctl_reg); + val &= ~USBDRD_UCTL_CTL_UPHY_RST; + dwc3_octeon_writeq(uctl_ctl_reg, val); } static int __init dwc3_octeon_device_init(void) @@ -527,10 +530,10 @@ static int __init dwc3_octeon_device_init(void) } mutex_lock(&dwc3_octeon_clocks_mutex); - if (dwc3_octeon_clocks_start(&pdev->dev, (u64)base) == 0) + if (dwc3_octeon_clocks_start(&pdev->dev, base) == 0) dev_info(&pdev->dev, "clocks initialized.\n"); - dwc3_octeon_set_endian_mode((u64)base); - dwc3_octeon_phy_reset((u64)base); + dwc3_octeon_set_endian_mode(base); + dwc3_octeon_phy_reset(base); mutex_unlock(&dwc3_octeon_clocks_mutex); devm_iounmap(&pdev->dev, base); devm_release_mem_region(&pdev->dev, res->start, diff --git a/arch/mips/configs/ci20_defconfig b/arch/mips/configs/ci20_defconfig index 11f08b6a3013..920b27977dac 100644 --- a/arch/mips/configs/ci20_defconfig +++ b/arch/mips/configs/ci20_defconfig @@ -19,19 +19,19 @@ CONFIG_USER_NS=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y -# CONFIG_VM_EVENT_COUNTERS is not set -# CONFIG_COMPAT_BRK is not set -CONFIG_SLAB=y CONFIG_MACH_INGENIC_SOC=y CONFIG_JZ4780_CI20=y CONFIG_HIGHMEM=y CONFIG_HZ_100=y -# CONFIG_SECCOMP is not set # CONFIG_SUSPEND is not set +# CONFIG_SECCOMP is not set CONFIG_MODULES=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_SLAB=y +# CONFIG_COMPAT_BRK is not set # CONFIG_COMPACTION is not set CONFIG_CMA=y +# CONFIG_VM_EVENT_COUNTERS is not set CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -40,7 +40,12 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y # CONFIG_INET_DIAG is not set # CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set +CONFIG_BT=m +# CONFIG_BT_LE is not set +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_BCM=y +CONFIG_CFG80211=m +CONFIG_CFG80211_WEXT=y CONFIG_DEVTMPFS=y CONFIG_FW_LOADER=m # CONFIG_ALLOW_DEV_COREDUMP is not set @@ -68,10 +73,27 @@ CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y # CONFIG_NET_VENDOR_STMICRO is not set # CONFIG_NET_VENDOR_VIA is not set # CONFIG_NET_VENDOR_WIZNET is not set -# CONFIG_WLAN is not set +# CONFIG_WLAN_VENDOR_ADMTEK is not set +# CONFIG_WLAN_VENDOR_ATH is not set +# CONFIG_WLAN_VENDOR_ATMEL is not set +CONFIG_BRCMFMAC=m +# CONFIG_WLAN_VENDOR_CISCO is not set +# CONFIG_WLAN_VENDOR_INTEL is not set +# CONFIG_WLAN_VENDOR_INTERSIL is not set +# CONFIG_WLAN_VENDOR_MARVELL is not set +# CONFIG_WLAN_VENDOR_MEDIATEK is not set +# CONFIG_WLAN_VENDOR_MICROCHIP is not set +# CONFIG_WLAN_VENDOR_PURELIFI is not set +# CONFIG_WLAN_VENDOR_RALINK is not set +# CONFIG_WLAN_VENDOR_REALTEK is not set +# CONFIG_WLAN_VENDOR_RSI is not set +# CONFIG_WLAN_VENDOR_SILABS is not set +# CONFIG_WLAN_VENDOR_ST is not set +# CONFIG_WLAN_VENDOR_TI is not set +# CONFIG_WLAN_VENDOR_ZYDAS is not set +# CONFIG_WLAN_VENDOR_QUANTENNA is not set CONFIG_KEYBOARD_GPIO=m # CONFIG_INPUT_MOUSE is not set -CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_LEGACY_PTY_COUNT=2 CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y @@ -79,6 +101,7 @@ CONFIG_SERIAL_8250_NR_UARTS=5 CONFIG_SERIAL_8250_RUNTIME_UARTS=5 CONFIG_SERIAL_8250_INGENIC=y CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_SERIAL_DEV_BUS=y CONFIG_I2C=y CONFIG_I2C_JZ4780=y CONFIG_SPI=y @@ -99,13 +122,12 @@ CONFIG_IR_GPIO_CIR=m CONFIG_IR_GPIO_TX=m CONFIG_MEDIA_SUPPORT=m CONFIG_DRM=m +CONFIG_DRM_DISPLAY_CONNECTOR=m CONFIG_DRM_INGENIC=m CONFIG_DRM_INGENIC_DW_HDMI=m -CONFIG_DRM_DISPLAY_CONNECTOR=m -# CONFIG_VGA_CONSOLE is not set CONFIG_FB=y +# CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_HID is not set CONFIG_USB=y CONFIG_USB_STORAGE=y CONFIG_USB_DWC2=y @@ -125,7 +147,6 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_BACKLIGHT=m CONFIG_LEDS_TRIGGER_CPU=y CONFIG_LEDS_TRIGGER_ACTIVITY=y -CONFIG_LEDS_TRIGGER_GPIO=y CONFIG_LEDS_TRIGGER_DEFAULT_ON=y CONFIG_LEDS_TRIGGER_TRANSIENT=y CONFIG_LEDS_TRIGGER_CAMERA=m @@ -144,7 +165,6 @@ CONFIG_JZ4780_NEMC=y CONFIG_PWM=y CONFIG_PWM_JZ4740=m CONFIG_NVMEM_JZ4780_EFUSE=y -CONFIG_JZ4770_PHY=y CONFIG_EXT4_FS=y # CONFIG_DNOTIFY is not set CONFIG_AUTOFS_FS=y @@ -157,7 +177,6 @@ CONFIG_CONFIGFS_FS=y CONFIG_UBIFS_FS=y CONFIG_NFS_FS=y CONFIG_ROOT_NFS=y -CONFIG_NLS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=y CONFIG_NLS_CODEPAGE_775=y @@ -196,6 +215,7 @@ CONFIG_NLS_ISO8859_15=y CONFIG_NLS_KOI8_R=y CONFIG_NLS_KOI8_U=y CONFIG_NLS_UTF8=y +# CONFIG_CRYPTO_AES is not set CONFIG_DMA_CMA=y CONFIG_CMA_SIZE_MBYTES=32 CONFIG_PRINTK_TIME=y @@ -206,7 +226,6 @@ CONFIG_DEBUG_FS=y CONFIG_PANIC_ON_OOPS=y CONFIG_PANIC_TIMEOUT=10 # CONFIG_SCHED_DEBUG is not set -# CONFIG_DEBUG_PREEMPT is not set CONFIG_STACKTRACE=y # CONFIG_FTRACE is not set CONFIG_CMDLINE_BOOL=y diff --git a/arch/mips/configs/loongson3_defconfig b/arch/mips/configs/loongson3_defconfig index 6f4a52608ea4..3087e64e6ebe 100644 --- a/arch/mips/configs/loongson3_defconfig +++ b/arch/mips/configs/loongson3_defconfig @@ -276,6 +276,13 @@ CONFIG_MEDIA_SUPPORT=m CONFIG_MEDIA_USB_SUPPORT=y CONFIG_USB_VIDEO_CLASS=m CONFIG_DRM=y +CONFIG_DRM_AMDGPU=m +CONFIG_DRM_AMDGPU_SI=y +CONFIG_DRM_AMDGPU_CIK=y +CONFIG_DRM_AMDGPU_USERPTR=y +CONFIG_DRM_AMD_ACP=y +CONFIG_DRM_AMD_DC=y +CONFIG_DRM_AMD_DC_SI=y CONFIG_DRM_RADEON=m CONFIG_DRM_QXL=y CONFIG_DRM_VIRTIO_GPU=y diff --git a/arch/mips/generic/board-ingenic.c b/arch/mips/generic/board-ingenic.c index c422bbc890ed..1f4906875e7b 100644 --- a/arch/mips/generic/board-ingenic.c +++ b/arch/mips/generic/board-ingenic.c @@ -17,6 +17,7 @@ #include <linux/types.h> #include <asm/bootinfo.h> +#include <asm/io.h> #include <asm/machine.h> #include <asm/reboot.h> @@ -60,6 +61,50 @@ static __init char *ingenic_get_system_type(unsigned long machtype) } } +#define INGENIC_CGU_BASE 0x10000000 +#define JZ4750_CGU_CPCCR_ECS BIT(30) +#define JZ4760_CGU_CPCCR_ECS BIT(31) + +static __init void ingenic_force_12M_ext(const void *fdt, unsigned int mask) +{ + const __be32 *prop; + unsigned int cpccr; + void __iomem *cgu; + bool use_div; + int offset; + + offset = fdt_path_offset(fdt, "/ext"); + if (offset < 0) + return; + + prop = fdt_getprop(fdt, offset, "clock-frequency", NULL); + if (!prop) + return; + + /* + * If the external oscillator is 24 MHz, enable the /2 divider to + * drive it down to 12 MHz, since this is what the hardware can work + * with. + * The 16 MHz cutoff value is arbitrary; setting it to 12 MHz would not + * work as the crystal frequency (as reported in the Device Tree) might + * be slightly above this value. + */ + use_div = be32_to_cpup(prop) >= 16000000; + + cgu = ioremap(INGENIC_CGU_BASE, 0x4); + if (!cgu) + return; + + cpccr = ioread32(cgu); + if (use_div) + cpccr |= mask; + else + cpccr &= ~mask; + iowrite32(cpccr, cgu); + + iounmap(cgu); +} + static __init const void *ingenic_fixup_fdt(const void *fdt, const void *match_data) { /* @@ -73,6 +118,18 @@ static __init const void *ingenic_fixup_fdt(const void *fdt, const void *match_d mips_machtype = (unsigned long)match_data; system_type = ingenic_get_system_type(mips_machtype); + switch (mips_machtype) { + case MACH_INGENIC_JZ4750: + case MACH_INGENIC_JZ4755: + ingenic_force_12M_ext(fdt, JZ4750_CGU_CPCCR_ECS); + break; + case MACH_INGENIC_JZ4760: + ingenic_force_12M_ext(fdt, JZ4760_CGU_CPCCR_ECS); + break; + default: + break; + } + return fdt; } @@ -117,14 +174,14 @@ static void ingenic_halt(void) ingenic_wait_instr(); } -static int __maybe_unused ingenic_pm_enter(suspend_state_t state) +static int ingenic_pm_enter(suspend_state_t state) { ingenic_wait_instr(); return 0; } -static const struct platform_suspend_ops ingenic_pm_ops __maybe_unused = { +static const struct platform_suspend_ops ingenic_pm_ops = { .valid = suspend_valid_only_mem, .enter = ingenic_pm_enter, }; diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h index 51a1737b03d0..404390bb87ea 100644 --- a/arch/mips/include/asm/cpu-features.h +++ b/arch/mips/include/asm/cpu-features.h @@ -125,7 +125,7 @@ ({ \ int __res; \ \ - switch (current_cpu_type()) { \ + switch (boot_cpu_type()) { \ case CPU_CAVIUM_OCTEON: \ case CPU_CAVIUM_OCTEON_PLUS: \ case CPU_CAVIUM_OCTEON2: \ @@ -368,7 +368,7 @@ ({ \ int __res; \ \ - switch (current_cpu_type()) { \ + switch (boot_cpu_type()) { \ case CPU_M14KC: \ case CPU_74K: \ case CPU_1074K: \ diff --git a/arch/mips/include/asm/dec/prom.h b/arch/mips/include/asm/dec/prom.h index 1e1247add1cf..908e96e3a311 100644 --- a/arch/mips/include/asm/dec/prom.h +++ b/arch/mips/include/asm/dec/prom.h @@ -70,7 +70,7 @@ static inline bool prom_is_rex(u32 magic) */ typedef struct { int pagesize; - unsigned char bitmap[0]; + unsigned char bitmap[]; } memmap; diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h index cc28d207a061..affd21e9c20b 100644 --- a/arch/mips/include/asm/io.h +++ b/arch/mips/include/asm/io.h @@ -554,6 +554,7 @@ extern void (*_dma_cache_inv)(unsigned long start, unsigned long size); * access */ #define xlate_dev_mem_ptr(p) __va(p) +#define unxlate_dev_mem_ptr(p, v) do { } while (0) void __ioread64_copy(void *to, const void __iomem *from, size_t count); diff --git a/arch/mips/include/asm/mach-loongson32/loongson1.h b/arch/mips/include/asm/mach-loongson32/loongson1.h index d8f9dec0ecc3..7971272345d3 100644 --- a/arch/mips/include/asm/mach-loongson32/loongson1.h +++ b/arch/mips/include/asm/mach-loongson32/loongson1.h @@ -48,6 +48,5 @@ #include <regs-clk.h> #include <regs-mux.h> #include <regs-rtc.h> -#include <regs-wdt.h> #endif /* __ASM_MACH_LOONGSON32_LOONGSON1_H */ diff --git a/arch/mips/include/asm/mach-loongson32/regs-wdt.h b/arch/mips/include/asm/mach-loongson32/regs-wdt.h deleted file mode 100644 index c6d345fe13f2..000000000000 --- a/arch/mips/include/asm/mach-loongson32/regs-wdt.h +++ /dev/null @@ -1,15 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com> - * - * Loongson 1 Watchdog Register Definitions. - */ - -#ifndef __ASM_MACH_LOONGSON32_REGS_WDT_H -#define __ASM_MACH_LOONGSON32_REGS_WDT_H - -#define WDT_EN 0x0 -#define WDT_TIMER 0x4 -#define WDT_SET 0x8 - -#endif /* __ASM_MACH_LOONGSON32_REGS_WDT_H */ diff --git a/arch/mips/include/asm/mach-ralink/mt7620.h b/arch/mips/include/asm/mach-ralink/mt7620.h index 3e37705ea9cf..62f4f072c003 100644 --- a/arch/mips/include/asm/mach-ralink/mt7620.h +++ b/arch/mips/include/asm/mach-ralink/mt7620.h @@ -20,52 +20,17 @@ #define SYSC_REG_CHIP_REV 0x0c #define SYSC_REG_SYSTEM_CONFIG0 0x10 #define SYSC_REG_SYSTEM_CONFIG1 0x14 -#define SYSC_REG_CLKCFG0 0x2c -#define SYSC_REG_CPU_SYS_CLKCFG 0x3c -#define SYSC_REG_CPLL_CONFIG0 0x54 -#define SYSC_REG_CPLL_CONFIG1 0x58 #define MT7620_CHIP_NAME0 0x3637544d #define MT7620_CHIP_NAME1 0x20203032 #define MT7628_CHIP_NAME1 0x20203832 -#define SYSCFG0_XTAL_FREQ_SEL BIT(6) - #define CHIP_REV_PKG_MASK 0x1 #define CHIP_REV_PKG_SHIFT 16 #define CHIP_REV_VER_MASK 0xf #define CHIP_REV_VER_SHIFT 8 #define CHIP_REV_ECO_MASK 0xf -#define CLKCFG0_PERI_CLK_SEL BIT(4) - -#define CPU_SYS_CLKCFG_OCP_RATIO_SHIFT 16 -#define CPU_SYS_CLKCFG_OCP_RATIO_MASK 0xf -#define CPU_SYS_CLKCFG_OCP_RATIO_1 0 /* 1:1 (Reserved) */ -#define CPU_SYS_CLKCFG_OCP_RATIO_1_5 1 /* 1:1.5 (Reserved) */ -#define CPU_SYS_CLKCFG_OCP_RATIO_2 2 /* 1:2 */ -#define CPU_SYS_CLKCFG_OCP_RATIO_2_5 3 /* 1:2.5 (Reserved) */ -#define CPU_SYS_CLKCFG_OCP_RATIO_3 4 /* 1:3 */ -#define CPU_SYS_CLKCFG_OCP_RATIO_3_5 5 /* 1:3.5 (Reserved) */ -#define CPU_SYS_CLKCFG_OCP_RATIO_4 6 /* 1:4 */ -#define CPU_SYS_CLKCFG_OCP_RATIO_5 7 /* 1:5 */ -#define CPU_SYS_CLKCFG_OCP_RATIO_10 8 /* 1:10 */ -#define CPU_SYS_CLKCFG_CPU_FDIV_SHIFT 8 -#define CPU_SYS_CLKCFG_CPU_FDIV_MASK 0x1f -#define CPU_SYS_CLKCFG_CPU_FFRAC_SHIFT 0 -#define CPU_SYS_CLKCFG_CPU_FFRAC_MASK 0x1f - -#define CPLL_CFG0_SW_CFG BIT(31) -#define CPLL_CFG0_PLL_MULT_RATIO_SHIFT 16 -#define CPLL_CFG0_PLL_MULT_RATIO_MASK 0x7 -#define CPLL_CFG0_LC_CURFCK BIT(15) -#define CPLL_CFG0_BYPASS_REF_CLK BIT(14) -#define CPLL_CFG0_PLL_DIV_RATIO_SHIFT 10 -#define CPLL_CFG0_PLL_DIV_RATIO_MASK 0x3 - -#define CPLL_CFG1_CPU_AUX1 BIT(25) -#define CPLL_CFG1_CPU_AUX0 BIT(24) - #define SYSCFG0_DRAM_TYPE_MASK 0x3 #define SYSCFG0_DRAM_TYPE_SHIFT 4 #define SYSCFG0_DRAM_TYPE_SDRAM 0 diff --git a/arch/mips/include/asm/mach-ralink/rt288x.h b/arch/mips/include/asm/mach-ralink/rt288x.h index 66a999cd1d80..66d190358e3a 100644 --- a/arch/mips/include/asm/mach-ralink/rt288x.h +++ b/arch/mips/include/asm/mach-ralink/rt288x.h @@ -18,7 +18,6 @@ #define SYSC_REG_CHIP_NAME1 0x04 #define SYSC_REG_CHIP_ID 0x0c #define SYSC_REG_SYSTEM_CONFIG 0x10 -#define SYSC_REG_CLKCFG 0x30 #define RT2880_CHIP_NAME0 0x38325452 #define RT2880_CHIP_NAME1 0x20203038 @@ -27,15 +26,6 @@ #define CHIP_ID_ID_SHIFT 8 #define CHIP_ID_REV_MASK 0xff -#define SYSTEM_CONFIG_CPUCLK_SHIFT 20 -#define SYSTEM_CONFIG_CPUCLK_MASK 0x3 -#define SYSTEM_CONFIG_CPUCLK_250 0x0 -#define SYSTEM_CONFIG_CPUCLK_266 0x1 -#define SYSTEM_CONFIG_CPUCLK_280 0x2 -#define SYSTEM_CONFIG_CPUCLK_300 0x3 - -#define CLKCFG_SRAM_CS_N_WDT BIT(9) - #define RT2880_SDRAM_BASE 0x08000000 #define RT2880_MEM_SIZE_MIN 2 #define RT2880_MEM_SIZE_MAX 128 diff --git a/arch/mips/include/asm/mach-ralink/rt305x.h b/arch/mips/include/asm/mach-ralink/rt305x.h index ef58f7bff957..4fc5c279cd75 100644 --- a/arch/mips/include/asm/mach-ralink/rt305x.h +++ b/arch/mips/include/asm/mach-ralink/rt305x.h @@ -67,26 +67,9 @@ static inline int soc_is_rt5350(void) #define CHIP_ID_ID_SHIFT 8 #define CHIP_ID_REV_MASK 0xff -#define RT305X_SYSCFG_CPUCLK_SHIFT 18 -#define RT305X_SYSCFG_CPUCLK_MASK 0x1 -#define RT305X_SYSCFG_CPUCLK_LOW 0x0 -#define RT305X_SYSCFG_CPUCLK_HIGH 0x1 - #define RT305X_SYSCFG_SRAM_CS0_MODE_SHIFT 2 -#define RT305X_SYSCFG_CPUCLK_MASK 0x1 #define RT305X_SYSCFG_SRAM_CS0_MODE_WDT 0x1 -#define RT3352_SYSCFG0_CPUCLK_SHIFT 8 -#define RT3352_SYSCFG0_CPUCLK_MASK 0x1 -#define RT3352_SYSCFG0_CPUCLK_LOW 0x0 -#define RT3352_SYSCFG0_CPUCLK_HIGH 0x1 - -#define RT5350_SYSCFG0_CPUCLK_SHIFT 8 -#define RT5350_SYSCFG0_CPUCLK_MASK 0x3 -#define RT5350_SYSCFG0_CPUCLK_360 0x0 -#define RT5350_SYSCFG0_CPUCLK_320 0x2 -#define RT5350_SYSCFG0_CPUCLK_300 0x3 - #define RT5350_SYSCFG0_DRAM_SIZE_SHIFT 12 #define RT5350_SYSCFG0_DRAM_SIZE_MASK 7 #define RT5350_SYSCFG0_DRAM_SIZE_2M 0 @@ -117,13 +100,9 @@ static inline int soc_is_rt5350(void) #define RT3352_SYSC_REG_SYSCFG0 0x010 #define RT3352_SYSC_REG_SYSCFG1 0x014 -#define RT3352_SYSC_REG_CLKCFG1 0x030 #define RT3352_SYSC_REG_RSTCTRL 0x034 #define RT3352_SYSC_REG_USB_PS 0x05c -#define RT3352_CLKCFG0_XTAL_SEL BIT(20) -#define RT3352_CLKCFG1_UPHY0_CLK_EN BIT(18) -#define RT3352_CLKCFG1_UPHY1_CLK_EN BIT(20) #define RT3352_RSTCTRL_UHST BIT(22) #define RT3352_RSTCTRL_UDEV BIT(25) #define RT3352_SYSCFG1_USB0_HOST_MODE BIT(10) diff --git a/arch/mips/include/asm/mach-ralink/rt3883.h b/arch/mips/include/asm/mach-ralink/rt3883.h index ad25d5e8d2dc..4a835b178925 100644 --- a/arch/mips/include/asm/mach-ralink/rt3883.h +++ b/arch/mips/include/asm/mach-ralink/rt3883.h @@ -92,14 +92,6 @@ #define RT3883_REVID_VER_ID_SHIFT 8 #define RT3883_REVID_ECO_ID_MASK 0x0f -#define RT3883_SYSCFG0_DRAM_TYPE_DDR2 BIT(17) -#define RT3883_SYSCFG0_CPUCLK_SHIFT 8 -#define RT3883_SYSCFG0_CPUCLK_MASK 0x3 -#define RT3883_SYSCFG0_CPUCLK_250 0x0 -#define RT3883_SYSCFG0_CPUCLK_384 0x1 -#define RT3883_SYSCFG0_CPUCLK_480 0x2 -#define RT3883_SYSCFG0_CPUCLK_500 0x3 - #define RT3883_SYSCFG1_USB0_HOST_MODE BIT(10) #define RT3883_SYSCFG1_PCIE_RC_MODE BIT(8) #define RT3883_SYSCFG1_PCI_HOST_MODE BIT(7) diff --git a/arch/mips/include/asm/smp.h b/arch/mips/include/asm/smp.h index aab8981bc32c..a40d8c0e4b87 100644 --- a/arch/mips/include/asm/smp.h +++ b/arch/mips/include/asm/smp.h @@ -57,6 +57,8 @@ extern int __cpu_logical_map[NR_CPUS]; /* Mask of CPUs which are currently definitely operating coherently */ extern cpumask_t cpu_coherent_mask; +extern unsigned int smp_max_threads __initdata; + extern asmlinkage void smp_bootstrap(void); extern void calculate_cpu_foreign_map(void); diff --git a/arch/mips/include/uapi/asm/inst.h b/arch/mips/include/uapi/asm/inst.h index 43d1faa02933..c29dbc8c1d49 100644 --- a/arch/mips/include/uapi/asm/inst.h +++ b/arch/mips/include/uapi/asm/inst.h @@ -273,6 +273,27 @@ enum lx_func { }; /* + * func field for special2 MXU opcodes (Ingenic XBurst MXU). + */ +enum mxu_func { + /* TODO, other MXU funcs */ + mxu_lx_op = 0x28, +}; + +/* + * op field for special2 MXU LX opcodes (Ingenic XBurst MXU). + */ +enum lx_ingenic_func { + mxu_lxb_op, + mxu_lxh_op, + /* reserved */ + mxu_lxw_op = 3, + mxu_lxbu_op, + mxu_lxhu_op, + /* more reserved */ +}; + +/* * BSHFL opcodes */ enum bshfl_func { @@ -774,6 +795,17 @@ struct dsp_format { /* SPEC3 DSP format instructions */ ;)))))) }; +struct mxu_lx_format { /* SPEC2 MXU LX format instructions */ + __BITFIELD_FIELD(unsigned int opcode : 6, + __BITFIELD_FIELD(unsigned int rs : 5, + __BITFIELD_FIELD(unsigned int rt : 5, + __BITFIELD_FIELD(unsigned int rd : 5, + __BITFIELD_FIELD(unsigned int strd : 2, + __BITFIELD_FIELD(unsigned int op : 3, + __BITFIELD_FIELD(unsigned int func : 6, + ;))))))) +}; + struct spec3_format { /* SPEC3 */ __BITFIELD_FIELD(unsigned int opcode:6, __BITFIELD_FIELD(unsigned int rs:5, @@ -1125,6 +1157,7 @@ union mips_instruction { struct loongson3_lswc2_format loongson3_lswc2_format; struct loongson3_lsdc2_format loongson3_lsdc2_format; struct loongson3_lscsr_format loongson3_lscsr_format; + struct mxu_lx_format mxu_lx_format; }; union mips16e_instruction { diff --git a/arch/mips/kernel/asm-offsets.c b/arch/mips/kernel/asm-offsets.c index 40fd4051bb3d..d1b11f66f748 100644 --- a/arch/mips/kernel/asm-offsets.c +++ b/arch/mips/kernel/asm-offsets.c @@ -23,6 +23,7 @@ #include <linux/kvm_host.h> +void output_ptreg_defines(void); void output_ptreg_defines(void) { COMMENT("MIPS pt_regs offsets."); @@ -75,6 +76,7 @@ void output_ptreg_defines(void) BLANK(); } +void output_task_defines(void); void output_task_defines(void) { COMMENT("MIPS task_struct offsets."); @@ -89,6 +91,7 @@ void output_task_defines(void) BLANK(); } +void output_thread_info_defines(void); void output_thread_info_defines(void) { COMMENT("MIPS thread_info offsets."); @@ -105,6 +108,7 @@ void output_thread_info_defines(void) BLANK(); } +void output_thread_defines(void); void output_thread_defines(void) { COMMENT("MIPS specific thread_struct offsets."); @@ -133,6 +137,7 @@ void output_thread_defines(void) } #ifdef CONFIG_MIPS_FP_SUPPORT +void output_thread_fpu_defines(void); void output_thread_fpu_defines(void) { OFFSET(THREAD_FPU, task_struct, thread.fpu); @@ -176,6 +181,7 @@ void output_thread_fpu_defines(void) } #endif +void output_mm_defines(void); void output_mm_defines(void) { COMMENT("Size of struct page"); @@ -210,6 +216,7 @@ void output_mm_defines(void) } #ifdef CONFIG_32BIT +void output_sc_defines(void); void output_sc_defines(void) { COMMENT("Linux sigcontext offsets."); @@ -232,6 +239,7 @@ void output_sc_defines(void) #endif #ifdef CONFIG_64BIT +void output_sc_defines(void); void output_sc_defines(void) { COMMENT("Linux sigcontext offsets."); @@ -245,6 +253,7 @@ void output_sc_defines(void) } #endif +void output_signal_defined(void); void output_signal_defined(void) { COMMENT("Linux signal numbers."); @@ -284,6 +293,7 @@ void output_signal_defined(void) } #ifdef CONFIG_CPU_CAVIUM_OCTEON +void output_octeon_cop2_state_defines(void); void output_octeon_cop2_state_defines(void) { COMMENT("Octeon specific octeon_cop2_state offsets."); @@ -315,6 +325,7 @@ void output_octeon_cop2_state_defines(void) #endif #ifdef CONFIG_HIBERNATION +void output_pbe_defines(void); void output_pbe_defines(void) { COMMENT(" Linux struct pbe offsets. "); @@ -327,6 +338,7 @@ void output_pbe_defines(void) #endif #ifdef CONFIG_CPU_PM +void output_pm_defines(void); void output_pm_defines(void) { COMMENT(" PM offsets. "); @@ -341,6 +353,7 @@ void output_pm_defines(void) #endif #ifdef CONFIG_MIPS_FP_SUPPORT +void output_kvm_defines(void); void output_kvm_defines(void) { COMMENT(" KVM/MIPS Specific offsets. "); @@ -385,6 +398,7 @@ void output_kvm_defines(void) #endif #ifdef CONFIG_MIPS_CPS +void output_cps_defines(void); void output_cps_defines(void) { COMMENT(" MIPS CPS offsets. "); diff --git a/arch/mips/kernel/smp-cps.c b/arch/mips/kernel/smp-cps.c index d7fdbec232da..dd55d59b88db 100644 --- a/arch/mips/kernel/smp-cps.c +++ b/arch/mips/kernel/smp-cps.c @@ -25,24 +25,13 @@ #include <asm/time.h> #include <asm/uasm.h> -static bool threads_disabled; static DECLARE_BITMAP(core_power, NR_CPUS); struct core_boot_config *mips_cps_core_bootcfg; -static int __init setup_nothreads(char *s) +static unsigned __init core_vpe_count(unsigned int cluster, unsigned core) { - threads_disabled = true; - return 0; -} -early_param("nothreads", setup_nothreads); - -static unsigned core_vpe_count(unsigned int cluster, unsigned core) -{ - if (threads_disabled) - return 1; - - return mips_cps_numvps(cluster, core); + return min(smp_max_threads, mips_cps_numvps(cluster, core)); } static void __init cps_smp_setup(void) diff --git a/arch/mips/kernel/smp-mt.c b/arch/mips/kernel/smp-mt.c index 5f04a0141068..7729cc733421 100644 --- a/arch/mips/kernel/smp-mt.c +++ b/arch/mips/kernel/smp-mt.c @@ -46,7 +46,8 @@ static void __init smvp_copy_vpe_config(void) static unsigned int __init smvp_vpe_init(unsigned int tc, unsigned int mvpconf0, unsigned int ncpu) { - if (tc > ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT)) + if (tc >= smp_max_threads || + (tc > ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT))) return ncpu; /* Deactivate all but VPE 0 */ diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index 90c71d800b59..8fbef537fb88 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -73,6 +73,24 @@ static cpumask_t cpu_core_setup_map; cpumask_t cpu_coherent_mask; +unsigned int smp_max_threads __initdata = UINT_MAX; + +static int __init early_nosmt(char *s) +{ + smp_max_threads = 1; + return 0; +} +early_param("nosmt", early_nosmt); + +static int __init early_smt(char *s) +{ + get_option(&s, &smp_max_threads); + /* Ensure at least one thread is available */ + smp_max_threads = clamp_val(smp_max_threads, 1U, UINT_MAX); + return 0; +} +early_param("smt", early_smt); + #ifdef CONFIG_GENERIC_IRQ_IPI static struct irq_desc *call_desc; static struct irq_desc *sched_desc; diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c index 7b5aba5df02e..f4cf94e92ec3 100644 --- a/arch/mips/kernel/unaligned.c +++ b/arch/mips/kernel/unaligned.c @@ -160,6 +160,47 @@ static void emulate_load_store_insn(struct pt_regs *regs, * The remaining opcodes are the ones that are really of * interest. */ +#ifdef CONFIG_MACH_INGENIC + case spec2_op: + if (insn.mxu_lx_format.func != mxu_lx_op) + goto sigbus; /* other MXU instructions we don't care */ + + switch (insn.mxu_lx_format.op) { + case mxu_lxw_op: + if (user && !access_ok(addr, 4)) + goto sigbus; + LoadW(addr, value, res); + if (res) + goto fault; + compute_return_epc(regs); + regs->regs[insn.mxu_lx_format.rd] = value; + break; + case mxu_lxh_op: + if (user && !access_ok(addr, 2)) + goto sigbus; + LoadHW(addr, value, res); + if (res) + goto fault; + compute_return_epc(regs); + regs->regs[insn.dsp_format.rd] = value; + break; + case mxu_lxhu_op: + if (user && !access_ok(addr, 2)) + goto sigbus; + LoadHWU(addr, value, res); + if (res) + goto fault; + compute_return_epc(regs); + regs->regs[insn.dsp_format.rd] = value; + break; + case mxu_lxb_op: + case mxu_lxbu_op: + goto sigbus; + default: + goto sigill; + } + break; +#endif case spec3_op: if (insn.dsp_format.func == lx_op) { switch (insn.dsp_format.op) { diff --git a/arch/mips/loongson32/common/Makefile b/arch/mips/loongson32/common/Makefile index 7b49c8260706..f3950d308187 100644 --- a/arch/mips/loongson32/common/Makefile +++ b/arch/mips/loongson32/common/Makefile @@ -3,4 +3,4 @@ # Makefile for common code of loongson1 based machines. # -obj-y += time.o irq.o platform.o prom.o reset.o setup.o +obj-y += time.o irq.o platform.o prom.o setup.o diff --git a/arch/mips/loongson32/common/reset.c b/arch/mips/loongson32/common/reset.c deleted file mode 100644 index 0c7399b303fb..000000000000 --- a/arch/mips/loongson32/common/reset.c +++ /dev/null @@ -1,51 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com> - */ - -#include <linux/io.h> -#include <linux/pm.h> -#include <linux/sizes.h> -#include <asm/idle.h> -#include <asm/reboot.h> - -#include <loongson1.h> - -static void __iomem *wdt_reg_base; - -static void ls1x_halt(void) -{ - while (1) { - if (cpu_wait) - cpu_wait(); - } -} - -static void ls1x_restart(char *command) -{ - __raw_writel(0x1, wdt_reg_base + WDT_EN); - __raw_writel(0x1, wdt_reg_base + WDT_TIMER); - __raw_writel(0x1, wdt_reg_base + WDT_SET); - - ls1x_halt(); -} - -static void ls1x_power_off(void) -{ - ls1x_halt(); -} - -static int __init ls1x_reboot_setup(void) -{ - wdt_reg_base = ioremap(LS1X_WDT_BASE, (SZ_4 + SZ_8)); - if (!wdt_reg_base) - panic("Failed to remap watchdog registers"); - - _machine_restart = ls1x_restart; - _machine_halt = ls1x_halt; - pm_power_off = ls1x_power_off; - - return 0; -} - -arch_initcall(ls1x_reboot_setup); diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 80e05ee98d62..8d514a9082c6 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -2123,16 +2123,8 @@ static void build_r4000_tlb_load_handler(void) uasm_i_tlbr(&p); - switch (current_cpu_type()) { - case CPU_CAVIUM_OCTEON: - case CPU_CAVIUM_OCTEON_PLUS: - case CPU_CAVIUM_OCTEON2: - break; - default: - if (cpu_has_mips_r2_exec_hazard) - uasm_i_ehb(&p); - break; - } + if (cpu_has_mips_r2_exec_hazard) + uasm_i_ehb(&p); /* Examine entrylo 0 or 1 based on ptr. */ if (use_bbit_insns()) { @@ -2197,16 +2189,8 @@ static void build_r4000_tlb_load_handler(void) uasm_i_tlbr(&p); - switch (current_cpu_type()) { - case CPU_CAVIUM_OCTEON: - case CPU_CAVIUM_OCTEON_PLUS: - case CPU_CAVIUM_OCTEON2: - break; - default: - if (cpu_has_mips_r2_exec_hazard) - uasm_i_ehb(&p); - break; - } + if (cpu_has_mips_r2_exec_hazard) + uasm_i_ehb(&p); /* Examine entrylo 0 or 1 based on ptr. */ if (use_bbit_insns()) { diff --git a/arch/mips/pci/pci-mt7620.c b/arch/mips/pci/pci-mt7620.c index 2700d75d41c5..5c4bdf6919e5 100644 --- a/arch/mips/pci/pci-mt7620.c +++ b/arch/mips/pci/pci-mt7620.c @@ -274,9 +274,6 @@ static int mt7628_pci_hw_init(struct platform_device *pdev) val |= 0x50 << 8; pci_config_write(NULL, 0, 0x70c, 4, val); - pci_config_read(NULL, 0, 0x70c, 4, &val); - dev_err(&pdev->dev, "Port 0 N_FTS = %x\n", (unsigned int) val); - return 0; } @@ -330,7 +327,7 @@ static int mt7620_pci_probe(struct platform_device *pdev) rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1); if (ralink_soc == MT762X_SOC_MT7620A) rt_sysc_m32(LC_CKDRVPD, PDRV_SW_SET, PPLL_DRV); - dev_err(&pdev->dev, "PCIE0 no card, disable it(RST&CLK)\n"); + dev_info(&pdev->dev, "PCIE0 no card, disable it(RST&CLK)\n"); return -1; } @@ -373,7 +370,7 @@ int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) dev->bus->number, slot); return 0; } - dev_err(&dev->dev, "card - bus=0x%x, slot = 0x%x irq=%d\n", + dev_info(&dev->dev, "card - bus=0x%x, slot = 0x%x irq=%d\n", dev->bus->number, slot, irq); /* configure the cache line size to 0x14 */ diff --git a/arch/mips/pci/pci-xtalk-bridge.c b/arch/mips/pci/pci-xtalk-bridge.c index ab9bedb82b28..68d5211afea8 100644 --- a/arch/mips/pci/pci-xtalk-bridge.c +++ b/arch/mips/pci/pci-xtalk-bridge.c @@ -733,7 +733,7 @@ err_remove_domain: return err; } -static int bridge_remove(struct platform_device *pdev) +static void bridge_remove(struct platform_device *pdev) { struct pci_bus *bus = platform_get_drvdata(pdev); struct bridge_controller *bc = BRIDGE_CONTROLLER(bus); @@ -745,13 +745,11 @@ static int bridge_remove(struct platform_device *pdev) pci_stop_root_bus(bus); pci_remove_root_bus(bus); pci_unlock_rescan_remove(); - - return 0; } static struct platform_driver bridge_driver = { - .probe = bridge_probe, - .remove = bridge_remove, + .probe = bridge_probe, + .remove_new = bridge_remove, .driver = { .name = "xtalk-bridge", } diff --git a/arch/mips/ralink/clk.c b/arch/mips/ralink/clk.c index 5b02bb7e0829..9db73fcac522 100644 --- a/arch/mips/ralink/clk.c +++ b/arch/mips/ralink/clk.c @@ -11,29 +11,72 @@ #include <linux/clkdev.h> #include <linux/clk.h> #include <linux/clk-provider.h> +#include <asm/mach-ralink/ralink_regs.h> #include <asm/time.h> #include "common.h" -void ralink_clk_add(const char *dev, unsigned long rate) +static const char *clk_cpu(int *idx) { - struct clk *clk = clk_register_fixed_rate(NULL, dev, NULL, 0, rate); - - if (!clk) - panic("failed to add clock"); - - clkdev_create(clk, NULL, "%s", dev); + switch (ralink_soc) { + case RT2880_SOC: + *idx = 0; + return "ralink,rt2880-sysc"; + case RT3883_SOC: + *idx = 0; + return "ralink,rt3883-sysc"; + case RT305X_SOC_RT3050: + *idx = 0; + return "ralink,rt3050-sysc"; + case RT305X_SOC_RT3052: + *idx = 0; + return "ralink,rt3052-sysc"; + case RT305X_SOC_RT3350: + *idx = 1; + return "ralink,rt3350-sysc"; + case RT305X_SOC_RT3352: + *idx = 1; + return "ralink,rt3352-sysc"; + case RT305X_SOC_RT5350: + *idx = 1; + return "ralink,rt5350-sysc"; + case MT762X_SOC_MT7620A: + *idx = 2; + return "ralink,mt7620-sysc"; + case MT762X_SOC_MT7620N: + *idx = 2; + return "ralink,mt7620-sysc"; + case MT762X_SOC_MT7628AN: + *idx = 1; + return "ralink,mt7628-sysc"; + case MT762X_SOC_MT7688: + *idx = 1; + return "ralink,mt7688-sysc"; + default: + *idx = -1; + return "invalid"; + } } void __init plat_time_init(void) { + struct of_phandle_args clkspec; + const char *compatible; struct clk *clk; + int cpu_clk_idx; ralink_of_remap(); - ralink_clk_init(); - clk = clk_get_sys("cpu", NULL); + compatible = clk_cpu(&cpu_clk_idx); + if (cpu_clk_idx == -1) + panic("unable to get CPU clock index"); + + of_clk_init(NULL); + clkspec.np = of_find_compatible_node(NULL, NULL, compatible); + clkspec.args_count = 1; + clkspec.args[0] = cpu_clk_idx; + clk = of_clk_get_from_provider(&clkspec); if (IS_ERR(clk)) panic("unable to get CPU clock, err=%ld", PTR_ERR(clk)); pr_info("CPU Clock: %ldMHz\n", clk_get_rate(clk) / 1000000); diff --git a/arch/mips/ralink/common.h b/arch/mips/ralink/common.h index 87fc16751281..893981a0ca7d 100644 --- a/arch/mips/ralink/common.h +++ b/arch/mips/ralink/common.h @@ -23,13 +23,6 @@ extern struct ralink_soc_info soc_info; extern void ralink_of_remap(void); -extern void ralink_clk_init(void); -extern void ralink_clk_add(const char *dev, unsigned long rate); - -extern void ralink_rst_init(void); - extern void __init prom_soc_init(struct ralink_soc_info *soc_info); -__iomem void *plat_of_remap_node(const char *node); - #endif /* _RALINK_COMMON_H__ */ diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c index 4435f50b8d24..672249a13a09 100644 --- a/arch/mips/ralink/mt7620.c +++ b/arch/mips/ralink/mt7620.c @@ -36,12 +36,6 @@ #define PMU1_CFG 0x8C #define DIG_SW_SEL BIT(25) -/* clock scaling */ -#define CLKCFG_FDIV_MASK 0x1f00 -#define CLKCFG_FDIV_USB_VAL 0x0300 -#define CLKCFG_FFRAC_MASK 0x001f -#define CLKCFG_FFRAC_USB_VAL 0x0003 - /* EFUSE bits */ #define EFUSE_MT7688 0x100000 @@ -53,235 +47,6 @@ static int dram_type; static struct ralink_soc_info *soc_info_ptr; -static __init u32 -mt7620_calc_rate(u32 ref_rate, u32 mul, u32 div) -{ - u64 t; - - t = ref_rate; - t *= mul; - do_div(t, div); - - return t; -} - -#define MHZ(x) ((x) * 1000 * 1000) - -static __init unsigned long -mt7620_get_xtal_rate(void) -{ - u32 reg; - - reg = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0); - if (reg & SYSCFG0_XTAL_FREQ_SEL) - return MHZ(40); - - return MHZ(20); -} - -static __init unsigned long -mt7620_get_periph_rate(unsigned long xtal_rate) -{ - u32 reg; - - reg = rt_sysc_r32(SYSC_REG_CLKCFG0); - if (reg & CLKCFG0_PERI_CLK_SEL) - return xtal_rate; - - return MHZ(40); -} - -static const u32 mt7620_clk_divider[] __initconst = { 2, 3, 4, 8 }; - -static __init unsigned long -mt7620_get_cpu_pll_rate(unsigned long xtal_rate) -{ - u32 reg; - u32 mul; - u32 div; - - reg = rt_sysc_r32(SYSC_REG_CPLL_CONFIG0); - if (reg & CPLL_CFG0_BYPASS_REF_CLK) - return xtal_rate; - - if ((reg & CPLL_CFG0_SW_CFG) == 0) - return MHZ(600); - - mul = (reg >> CPLL_CFG0_PLL_MULT_RATIO_SHIFT) & - CPLL_CFG0_PLL_MULT_RATIO_MASK; - mul += 24; - if (reg & CPLL_CFG0_LC_CURFCK) - mul *= 2; - - div = (reg >> CPLL_CFG0_PLL_DIV_RATIO_SHIFT) & - CPLL_CFG0_PLL_DIV_RATIO_MASK; - - WARN_ON(div >= ARRAY_SIZE(mt7620_clk_divider)); - - return mt7620_calc_rate(xtal_rate, mul, mt7620_clk_divider[div]); -} - -static __init unsigned long -mt7620_get_pll_rate(unsigned long xtal_rate, unsigned long cpu_pll_rate) -{ - u32 reg; - - reg = rt_sysc_r32(SYSC_REG_CPLL_CONFIG1); - if (reg & CPLL_CFG1_CPU_AUX1) - return xtal_rate; - - if (reg & CPLL_CFG1_CPU_AUX0) - return MHZ(480); - - return cpu_pll_rate; -} - -static __init unsigned long -mt7620_get_cpu_rate(unsigned long pll_rate) -{ - u32 reg; - u32 mul; - u32 div; - - reg = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG); - - mul = reg & CPU_SYS_CLKCFG_CPU_FFRAC_MASK; - div = (reg >> CPU_SYS_CLKCFG_CPU_FDIV_SHIFT) & - CPU_SYS_CLKCFG_CPU_FDIV_MASK; - - return mt7620_calc_rate(pll_rate, mul, div); -} - -static const u32 mt7620_ocp_dividers[16] __initconst = { - [CPU_SYS_CLKCFG_OCP_RATIO_2] = 2, - [CPU_SYS_CLKCFG_OCP_RATIO_3] = 3, - [CPU_SYS_CLKCFG_OCP_RATIO_4] = 4, - [CPU_SYS_CLKCFG_OCP_RATIO_5] = 5, - [CPU_SYS_CLKCFG_OCP_RATIO_10] = 10, -}; - -static __init unsigned long -mt7620_get_dram_rate(unsigned long pll_rate) -{ - if (dram_type == SYSCFG0_DRAM_TYPE_SDRAM) - return pll_rate / 4; - - return pll_rate / 3; -} - -static __init unsigned long -mt7620_get_sys_rate(unsigned long cpu_rate) -{ - u32 reg; - u32 ocp_ratio; - u32 div; - - reg = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG); - - ocp_ratio = (reg >> CPU_SYS_CLKCFG_OCP_RATIO_SHIFT) & - CPU_SYS_CLKCFG_OCP_RATIO_MASK; - - if (WARN_ON(ocp_ratio >= ARRAY_SIZE(mt7620_ocp_dividers))) - return cpu_rate; - - div = mt7620_ocp_dividers[ocp_ratio]; - if (WARN(!div, "invalid divider for OCP ratio %u", ocp_ratio)) - return cpu_rate; - - return cpu_rate / div; -} - -void __init ralink_clk_init(void) -{ - unsigned long xtal_rate; - unsigned long cpu_pll_rate; - unsigned long pll_rate; - unsigned long cpu_rate; - unsigned long sys_rate; - unsigned long dram_rate; - unsigned long periph_rate; - unsigned long pcmi2s_rate; - - xtal_rate = mt7620_get_xtal_rate(); - -#define RFMT(label) label ":%lu.%03luMHz " -#define RINT(x) ((x) / 1000000) -#define RFRAC(x) (((x) / 1000) % 1000) - - if (is_mt76x8()) { - if (xtal_rate == MHZ(40)) - cpu_rate = MHZ(580); - else - cpu_rate = MHZ(575); - dram_rate = sys_rate = cpu_rate / 3; - periph_rate = MHZ(40); - pcmi2s_rate = MHZ(480); - - ralink_clk_add("10000d00.uartlite", periph_rate); - ralink_clk_add("10000e00.uartlite", periph_rate); - } else { - cpu_pll_rate = mt7620_get_cpu_pll_rate(xtal_rate); - pll_rate = mt7620_get_pll_rate(xtal_rate, cpu_pll_rate); - - cpu_rate = mt7620_get_cpu_rate(pll_rate); - dram_rate = mt7620_get_dram_rate(pll_rate); - sys_rate = mt7620_get_sys_rate(cpu_rate); - periph_rate = mt7620_get_periph_rate(xtal_rate); - pcmi2s_rate = periph_rate; - - pr_debug(RFMT("XTAL") RFMT("CPU_PLL") RFMT("PLL"), - RINT(xtal_rate), RFRAC(xtal_rate), - RINT(cpu_pll_rate), RFRAC(cpu_pll_rate), - RINT(pll_rate), RFRAC(pll_rate)); - - ralink_clk_add("10000500.uart", periph_rate); - } - - pr_debug(RFMT("CPU") RFMT("DRAM") RFMT("SYS") RFMT("PERIPH"), - RINT(cpu_rate), RFRAC(cpu_rate), - RINT(dram_rate), RFRAC(dram_rate), - RINT(sys_rate), RFRAC(sys_rate), - RINT(periph_rate), RFRAC(periph_rate)); -#undef RFRAC -#undef RINT -#undef RFMT - - ralink_clk_add("cpu", cpu_rate); - ralink_clk_add("10000100.timer", periph_rate); - ralink_clk_add("10000120.watchdog", periph_rate); - ralink_clk_add("10000900.i2c", periph_rate); - ralink_clk_add("10000a00.i2s", pcmi2s_rate); - ralink_clk_add("10000b00.spi", sys_rate); - ralink_clk_add("10000b40.spi", sys_rate); - ralink_clk_add("10000c00.uartlite", periph_rate); - ralink_clk_add("10000d00.uart1", periph_rate); - ralink_clk_add("10000e00.uart2", periph_rate); - ralink_clk_add("10180000.wmac", xtal_rate); - - if (IS_ENABLED(CONFIG_USB) && !is_mt76x8()) { - /* - * When the CPU goes into sleep mode, the BUS clock will be - * too low for USB to function properly. Adjust the busses - * fractional divider to fix this - */ - u32 val = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG); - - val &= ~(CLKCFG_FDIV_MASK | CLKCFG_FFRAC_MASK); - val |= CLKCFG_FDIV_USB_VAL | CLKCFG_FFRAC_USB_VAL; - - rt_sysc_w32(val, SYSC_REG_CPU_SYS_CLKCFG); - } -} - -void __init ralink_of_remap(void) -{ - rt_sysc_membase = plat_of_remap_node("ralink,mt7620a-sysc"); - rt_memc_membase = plat_of_remap_node("ralink,mt7620a-memc"); - - if (!rt_sysc_membase || !rt_memc_membase) - panic("Failed to remap core resources"); -} - static __init void mt7620_dram_init(struct ralink_soc_info *soc_info) { diff --git a/arch/mips/ralink/mt7621.c b/arch/mips/ralink/mt7621.c index c3fbab50b95c..137781d0bd0a 100644 --- a/arch/mips/ralink/mt7621.c +++ b/arch/mips/ralink/mt7621.c @@ -89,15 +89,6 @@ static void __init mt7621_memory_detect(void) memblock_add(MT7621_HIGHMEM_BASE, MT7621_HIGHMEM_SIZE); } -void __init ralink_of_remap(void) -{ - rt_sysc_membase = plat_of_remap_node("mediatek,mt7621-sysc"); - rt_memc_membase = plat_of_remap_node("mediatek,mt7621-memc"); - - if (!rt_sysc_membase || !rt_memc_membase) - panic("Failed to remap core resources"); -} - static unsigned int __init mt7621_get_soc_name0(void) { return __raw_readl(MT7621_SYSC_BASE + SYSC_REG_CHIP_NAME0); diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c index 4d06de77d92a..45d60c094496 100644 --- a/arch/mips/ralink/of.c +++ b/arch/mips/ralink/of.c @@ -29,28 +29,61 @@ __iomem void *rt_sysc_membase; __iomem void *rt_memc_membase; EXPORT_SYMBOL_GPL(rt_sysc_membase); -__iomem void *plat_of_remap_node(const char *node) +static const struct of_device_id mtmips_memc_match[] = { + { .compatible = "mediatek,mt7621-memc" }, + { .compatible = "ralink,mt7620a-memc" }, + { .compatible = "ralink,rt2880-memc" }, + { .compatible = "ralink,rt3050-memc" }, + { .compatible = "ralink,rt3883-memc" }, + {} +}; + +static const struct of_device_id mtmips_sysc_match[] = { + { .compatible = "mediatek,mt7621-sysc" }, + { .compatible = "ralink,mt7620-sysc" }, + { .compatible = "ralink,mt7628-sysc" }, + { .compatible = "ralink,mt7688-sysc" }, + { .compatible = "ralink,rt2880-sysc" }, + { .compatible = "ralink,rt3050-sysc" }, + { .compatible = "ralink,rt3052-sysc" }, + { .compatible = "ralink,rt3352-sysc" }, + { .compatible = "ralink,rt3883-sysc" }, + { .compatible = "ralink,rt5350-sysc" }, + {} +}; + +static __iomem void * +mtmips_of_remap_node(const struct of_device_id *match, const char *type) { struct resource res; struct device_node *np; - np = of_find_compatible_node(NULL, NULL, node); + np = of_find_matching_node(NULL, match); if (!np) - panic("Failed to find %s node", node); + panic("Failed to find %s controller node", type); if (of_address_to_resource(np, 0, &res)) - panic("Failed to get resource for %s", node); - - of_node_put(np); + panic("Failed to get resource for %s node", np->name); if (!request_mem_region(res.start, resource_size(&res), res.name)) - panic("Failed to request resources for %s", node); + panic("Failed to request resources for %s node", np->name); + + of_node_put(np); return ioremap(res.start, resource_size(&res)); } +void __init ralink_of_remap(void) +{ + rt_sysc_membase = mtmips_of_remap_node(mtmips_sysc_match, "system"); + rt_memc_membase = mtmips_of_remap_node(mtmips_memc_match, "memory"); + + if (!rt_sysc_membase || !rt_memc_membase) + panic("Failed to remap core resources"); +} + void __init plat_mem_setup(void) { void *dtb; @@ -81,10 +114,6 @@ static int __init plat_of_setup(void) { __dt_register_buses(soc_info.compatible, "palmbus"); - /* make sure that the reset controller is setup early */ - if (ralink_soc != MT762X_SOC_MT7621AT) - ralink_rst_init(); - return 0; } diff --git a/arch/mips/ralink/reset.c b/arch/mips/ralink/reset.c index 274d33078c5e..4875637ef469 100644 --- a/arch/mips/ralink/reset.c +++ b/arch/mips/ralink/reset.c @@ -10,7 +10,6 @@ #include <linux/io.h> #include <linux/of.h> #include <linux/delay.h> -#include <linux/reset-controller.h> #include <asm/reboot.h> @@ -22,66 +21,6 @@ #define RSTCTL_RESET_PCI BIT(26) #define RSTCTL_RESET_SYSTEM BIT(0) -static int ralink_assert_device(struct reset_controller_dev *rcdev, - unsigned long id) -{ - u32 val; - - if (id == 0) - return -1; - - val = rt_sysc_r32(SYSC_REG_RESET_CTRL); - val |= BIT(id); - rt_sysc_w32(val, SYSC_REG_RESET_CTRL); - - return 0; -} - -static int ralink_deassert_device(struct reset_controller_dev *rcdev, - unsigned long id) -{ - u32 val; - - if (id == 0) - return -1; - - val = rt_sysc_r32(SYSC_REG_RESET_CTRL); - val &= ~BIT(id); - rt_sysc_w32(val, SYSC_REG_RESET_CTRL); - - return 0; -} - -static int ralink_reset_device(struct reset_controller_dev *rcdev, - unsigned long id) -{ - ralink_assert_device(rcdev, id); - return ralink_deassert_device(rcdev, id); -} - -static const struct reset_control_ops reset_ops = { - .reset = ralink_reset_device, - .assert = ralink_assert_device, - .deassert = ralink_deassert_device, -}; - -static struct reset_controller_dev reset_dev = { - .ops = &reset_ops, - .owner = THIS_MODULE, - .nr_resets = 32, - .of_reset_n_cells = 1, -}; - -void ralink_rst_init(void) -{ - reset_dev.of_node = of_find_compatible_node(NULL, NULL, - "ralink,rt2880-reset"); - if (!reset_dev.of_node) - pr_err("Failed to find reset controller node"); - else - reset_controller_register(&reset_dev); -} - static void ralink_restart(char *command) { if (IS_ENABLED(CONFIG_PCI)) { diff --git a/arch/mips/ralink/rt288x.c b/arch/mips/ralink/rt288x.c index 456ba0b2599e..ce8b5b6025bb 100644 --- a/arch/mips/ralink/rt288x.c +++ b/arch/mips/ralink/rt288x.c @@ -21,46 +21,6 @@ static struct ralink_soc_info *soc_info_ptr; -void __init ralink_clk_init(void) -{ - unsigned long cpu_rate, wmac_rate = 40000000; - u32 t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG); - t = ((t >> SYSTEM_CONFIG_CPUCLK_SHIFT) & SYSTEM_CONFIG_CPUCLK_MASK); - - switch (t) { - case SYSTEM_CONFIG_CPUCLK_250: - cpu_rate = 250000000; - break; - case SYSTEM_CONFIG_CPUCLK_266: - cpu_rate = 266666667; - break; - case SYSTEM_CONFIG_CPUCLK_280: - cpu_rate = 280000000; - break; - case SYSTEM_CONFIG_CPUCLK_300: - cpu_rate = 300000000; - break; - } - - ralink_clk_add("cpu", cpu_rate); - ralink_clk_add("300100.timer", cpu_rate / 2); - ralink_clk_add("300120.watchdog", cpu_rate / 2); - ralink_clk_add("300500.uart", cpu_rate / 2); - ralink_clk_add("300900.i2c", cpu_rate / 2); - ralink_clk_add("300c00.uartlite", cpu_rate / 2); - ralink_clk_add("400000.ethernet", cpu_rate / 2); - ralink_clk_add("480000.wmac", wmac_rate); -} - -void __init ralink_of_remap(void) -{ - rt_sysc_membase = plat_of_remap_node("ralink,rt2880-sysc"); - rt_memc_membase = plat_of_remap_node("ralink,rt2880-memc"); - - if (!rt_sysc_membase || !rt_memc_membase) - panic("Failed to remap core resources"); -} - static unsigned int __init rt2880_get_soc_name0(void) { return __raw_readl(RT2880_SYSC_BASE + SYSC_REG_CHIP_NAME0); diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c index d8dcc5cc66cc..1f422470b029 100644 --- a/arch/mips/ralink/rt305x.c +++ b/arch/mips/ralink/rt305x.c @@ -56,93 +56,6 @@ static unsigned long rt5350_get_mem_size(void) return ret; } -void __init ralink_clk_init(void) -{ - unsigned long cpu_rate, sys_rate, wdt_rate, uart_rate; - unsigned long wmac_rate = 40000000; - - u32 t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG); - - if (soc_is_rt305x() || soc_is_rt3350()) { - t = (t >> RT305X_SYSCFG_CPUCLK_SHIFT) & - RT305X_SYSCFG_CPUCLK_MASK; - switch (t) { - case RT305X_SYSCFG_CPUCLK_LOW: - cpu_rate = 320000000; - break; - case RT305X_SYSCFG_CPUCLK_HIGH: - cpu_rate = 384000000; - break; - } - sys_rate = uart_rate = wdt_rate = cpu_rate / 3; - } else if (soc_is_rt3352()) { - t = (t >> RT3352_SYSCFG0_CPUCLK_SHIFT) & - RT3352_SYSCFG0_CPUCLK_MASK; - switch (t) { - case RT3352_SYSCFG0_CPUCLK_LOW: - cpu_rate = 384000000; - break; - case RT3352_SYSCFG0_CPUCLK_HIGH: - cpu_rate = 400000000; - break; - } - sys_rate = wdt_rate = cpu_rate / 3; - uart_rate = 40000000; - } else if (soc_is_rt5350()) { - t = (t >> RT5350_SYSCFG0_CPUCLK_SHIFT) & - RT5350_SYSCFG0_CPUCLK_MASK; - switch (t) { - case RT5350_SYSCFG0_CPUCLK_360: - cpu_rate = 360000000; - sys_rate = cpu_rate / 3; - break; - case RT5350_SYSCFG0_CPUCLK_320: - cpu_rate = 320000000; - sys_rate = cpu_rate / 4; - break; - case RT5350_SYSCFG0_CPUCLK_300: - cpu_rate = 300000000; - sys_rate = cpu_rate / 3; - break; - default: - BUG(); - } - uart_rate = 40000000; - wdt_rate = sys_rate; - } else { - BUG(); - } - - if (soc_is_rt3352() || soc_is_rt5350()) { - u32 val = rt_sysc_r32(RT3352_SYSC_REG_SYSCFG0); - - if (!(val & RT3352_CLKCFG0_XTAL_SEL)) - wmac_rate = 20000000; - } - - ralink_clk_add("cpu", cpu_rate); - ralink_clk_add("sys", sys_rate); - ralink_clk_add("10000900.i2c", uart_rate); - ralink_clk_add("10000a00.i2s", uart_rate); - ralink_clk_add("10000b00.spi", sys_rate); - ralink_clk_add("10000b40.spi", sys_rate); - ralink_clk_add("10000100.timer", wdt_rate); - ralink_clk_add("10000120.watchdog", wdt_rate); - ralink_clk_add("10000500.uart", uart_rate); - ralink_clk_add("10000c00.uartlite", uart_rate); - ralink_clk_add("10100000.ethernet", sys_rate); - ralink_clk_add("10180000.wmac", wmac_rate); -} - -void __init ralink_of_remap(void) -{ - rt_sysc_membase = plat_of_remap_node("ralink,rt3050-sysc"); - rt_memc_membase = plat_of_remap_node("ralink,rt3050-memc"); - - if (!rt_sysc_membase || !rt_memc_membase) - panic("Failed to remap core resources"); -} - static unsigned int __init rt305x_get_soc_name0(void) { return __raw_readl(RT305X_SYSC_BASE + SYSC_REG_CHIP_NAME0); diff --git a/arch/mips/ralink/rt3883.c b/arch/mips/ralink/rt3883.c index cca887af378f..21ce00da5758 100644 --- a/arch/mips/ralink/rt3883.c +++ b/arch/mips/ralink/rt3883.c @@ -21,59 +21,6 @@ static struct ralink_soc_info *soc_info_ptr; -void __init ralink_clk_init(void) -{ - unsigned long cpu_rate, sys_rate; - u32 syscfg0; - u32 clksel; - u32 ddr2; - - syscfg0 = rt_sysc_r32(RT3883_SYSC_REG_SYSCFG0); - clksel = ((syscfg0 >> RT3883_SYSCFG0_CPUCLK_SHIFT) & - RT3883_SYSCFG0_CPUCLK_MASK); - ddr2 = syscfg0 & RT3883_SYSCFG0_DRAM_TYPE_DDR2; - - switch (clksel) { - case RT3883_SYSCFG0_CPUCLK_250: - cpu_rate = 250000000; - sys_rate = (ddr2) ? 125000000 : 83000000; - break; - case RT3883_SYSCFG0_CPUCLK_384: - cpu_rate = 384000000; - sys_rate = (ddr2) ? 128000000 : 96000000; - break; - case RT3883_SYSCFG0_CPUCLK_480: - cpu_rate = 480000000; - sys_rate = (ddr2) ? 160000000 : 120000000; - break; - case RT3883_SYSCFG0_CPUCLK_500: - cpu_rate = 500000000; - sys_rate = (ddr2) ? 166000000 : 125000000; - break; - } - - ralink_clk_add("cpu", cpu_rate); - ralink_clk_add("10000100.timer", sys_rate); - ralink_clk_add("10000120.watchdog", sys_rate); - ralink_clk_add("10000500.uart", 40000000); - ralink_clk_add("10000900.i2c", 40000000); - ralink_clk_add("10000a00.i2s", 40000000); - ralink_clk_add("10000b00.spi", sys_rate); - ralink_clk_add("10000b40.spi", sys_rate); - ralink_clk_add("10000c00.uartlite", 40000000); - ralink_clk_add("10100000.ethernet", sys_rate); - ralink_clk_add("10180000.wmac", 40000000); -} - -void __init ralink_of_remap(void) -{ - rt_sysc_membase = plat_of_remap_node("ralink,rt3883-sysc"); - rt_memc_membase = plat_of_remap_node("ralink,rt3883-memc"); - - if (!rt_sysc_membase || !rt_memc_membase) - panic("Failed to remap core resources"); -} - static unsigned int __init rt3883_get_soc_name0(void) { return __raw_readl(RT3883_SYSC_BASE + RT3883_SYSC_REG_CHIPID0_3); diff --git a/arch/mips/sibyte/swarm/platform.c b/arch/mips/sibyte/swarm/platform.c index 484969db7713..339d77a0a08f 100644 --- a/arch/mips/sibyte/swarm/platform.c +++ b/arch/mips/sibyte/swarm/platform.c @@ -88,15 +88,15 @@ device_initcall(swarm_pata_init); #define sb1250_dev_struct(num) \ static struct resource sb1250_res##num = { \ .name = "SB1250 MAC " __stringify(num), \ - .flags = IORESOURCE_MEM, \ - .start = A_MAC_CHANNEL_BASE(num), \ - .end = A_MAC_CHANNEL_BASE(num + 1) -1, \ + .flags = IORESOURCE_MEM, \ + .start = A_MAC_CHANNEL_BASE(num), \ + .end = A_MAC_CHANNEL_BASE(num + 1) - 1, \ };\ static struct platform_device sb1250_dev##num = { \ - .name = "sb1250-mac", \ - .id = num, \ - .resource = &sb1250_res##num, \ - .num_resources = 1, \ + .name = "sb1250-mac", \ + .id = num, \ + .resource = &sb1250_res##num, \ + .num_resources = 1, \ } sb1250_dev_struct(0); |