diff options
| author | Paul Bolle <pebolle@tiscali.nl> | 2013-03-20 10:43:48 +0100 |
|---|---|---|
| committer | Jesper Nilsson <jespern@axis.com> | 2013-09-10 17:28:19 +0200 |
| commit | 569fa26319203a41238e83340c54639eadfea89b (patch) | |
| tree | 44121fed5c8924ac2033234e887179bd572f4e0b /arch/cris/arch-v10 | |
| parent | 96184b606fa02ba8f6fe00a074d7d43617995008 (diff) | |
| download | lwn-569fa26319203a41238e83340c54639eadfea89b.tar.gz lwn-569fa26319203a41238e83340c54639eadfea89b.zip | |
CRIS: Remove last traces of legacy RTC drivers
These legacy drivers were removed in commit
9c75fc8c5c8c50775fc8b89418219221335b758f ("CRIS: Remove legacy RTC
drivers"). Now remove their last traces in two Kconfig files and one
Makefile.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jesper Nilsson <jespern@axis.com>
Diffstat (limited to 'arch/cris/arch-v10')
| -rw-r--r-- | arch/cris/arch-v10/drivers/Kconfig | 47 | ||||
| -rw-r--r-- | arch/cris/arch-v10/drivers/Makefile | 2 |
2 files changed, 0 insertions, 49 deletions
diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig index daf5f19b61a1..f7c4272fabf0 100644 --- a/arch/cris/arch-v10/drivers/Kconfig +++ b/arch/cris/arch-v10/drivers/Kconfig @@ -580,51 +580,4 @@ config ETRAX_PB_CHANGEABLE_BITS Bit set = changeable. You probably want 00 here. -config ETRAX_DS1302_RST_ON_GENERIC_PORT - bool "DS1302 RST on Generic Port" - depends on ETRAX_DS1302 - help - If your product has the RST signal line for the DS1302 RTC on the - Generic Port then say Y here, otherwise leave it as N in which - case the RST signal line is assumed to be connected to Port PB - (just like the SCL and SDA lines). - -config ETRAX_DS1302_RSTBIT - int "DS1302 RST bit number" - depends on ETRAX_DS1302 - default "2" - help - This is the bit number for the RST signal line of the DS1302 RTC on - the selected port. If you have selected the generic port then it - should be bit 27, otherwise your best bet is bit 5. - -config ETRAX_DS1302_SCLBIT - int "DS1302 SCL bit number" - depends on ETRAX_DS1302 - default "1" - help - This is the bit number for the SCL signal line of the DS1302 RTC on - Port PB. This is probably best left at 3. - -config ETRAX_DS1302_SDABIT - int "DS1302 SDA bit number" - depends on ETRAX_DS1302 - default "0" - help - This is the bit number for the SDA signal line of the DS1302 RTC on - Port PB. This is probably best left at 2. - -config ETRAX_DS1302_TRICKLE_CHARGE - int "DS1302 Trickle charger value" - depends on ETRAX_DS1302 - default "0" - help - This controls the initial value of the trickle charge register. - 0 = disabled (use this if you are unsure or have a non rechargeable battery) - Otherwise the following values can be OR:ed together to control the - charge current: - 1 = 2kohm, 2 = 4kohm, 3 = 4kohm - 4 = 1 diode, 8 = 2 diodes - Allowed values are (increasing current): 0, 11, 10, 9, 7, 6, 5 - endif diff --git a/arch/cris/arch-v10/drivers/Makefile b/arch/cris/arch-v10/drivers/Makefile index 44bf2e88c26e..e5c13183b97c 100644 --- a/arch/cris/arch-v10/drivers/Makefile +++ b/arch/cris/arch-v10/drivers/Makefile @@ -6,7 +6,5 @@ obj-$(CONFIG_ETRAX_AXISFLASHMAP) += axisflashmap.o obj-$(CONFIG_ETRAX_I2C) += i2c.o obj-$(CONFIG_ETRAX_I2C_EEPROM) += eeprom.o obj-$(CONFIG_ETRAX_GPIO) += gpio.o -obj-$(CONFIG_ETRAX_DS1302) += ds1302.o -obj-$(CONFIG_ETRAX_PCF8563) += pcf8563.o obj-$(CONFIG_ETRAX_SYNCHRONOUS_SERIAL) += sync_serial.o |