Merge branch 'main' into zstd-linus

2050 files changed, 56329 insertions, 39414 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 4c97cb40eebb..a08c9d092a33 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -5,6 +5,7 @@ config ARM
 	select ARCH_32BIT_OFF_T
 	select ARCH_CORRECT_STACKTRACE_ON_KRETPROBE if HAVE_KRETPROBES && FRAME_POINTER && !ARM_UNWIND
 	select ARCH_HAS_BINFMT_FLAT
+	select ARCH_HAS_CURRENT_STACK_POINTER
 	select ARCH_HAS_DEBUG_VIRTUAL if MMU
 	select ARCH_HAS_DMA_WRITE_COMBINE if !ARM_DMA_MEM_BUFFERABLE
 	select ARCH_HAS_ELF_RANDOMIZE
@@ -14,13 +15,12 @@ config ARM
 	select ARCH_HAS_MEMBARRIER_SYNC_CORE
 	select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
 	select ARCH_HAS_PTE_SPECIAL if ARM_LPAE
-	select ARCH_HAS_PHYS_TO_DMA
 	select ARCH_HAS_SETUP_DMA_OPS
 	select ARCH_HAS_SET_MEMORY
 	select ARCH_HAS_STRICT_KERNEL_RWX if MMU && !XIP_KERNEL
 	select ARCH_HAS_STRICT_MODULE_RWX if MMU
-	select ARCH_HAS_SYNC_DMA_FOR_DEVICE if SWIOTLB || !MMU
-	select ARCH_HAS_SYNC_DMA_FOR_CPU if SWIOTLB || !MMU
+	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
+	select ARCH_HAS_SYNC_DMA_FOR_CPU
 	select ARCH_HAS_TEARDOWN_DMA_OPS if MMU
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
 	select ARCH_HAVE_CUSTOM_GPIO_H
@@ -28,7 +28,6 @@ config ARM
 	select ARCH_HAS_GCOV_PROFILE_ALL
 	select ARCH_KEEP_MEMBLOCK
 	select ARCH_MIGHT_HAVE_PC_PARPORT
-	select ARCH_NO_SG_CHAIN if !ARM_HAS_SG_CHAIN
 	select ARCH_OPTIONAL_KERNEL_RWX if ARCH_HAS_STRICT_KERNEL_RWX
 	select ARCH_OPTIONAL_KERNEL_RWX_DEFAULT if CPU_V7
 	select ARCH_SUPPORTS_ATOMIC_RMW
@@ -37,17 +36,19 @@ config ARM
 	select ARCH_USE_CMPXCHG_LOCKREF
 	select ARCH_USE_MEMTEST
 	select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT if MMU
+	select ARCH_WANT_GENERAL_HUGETLB
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select ARCH_WANT_LD_ORPHAN_WARN
 	select BINFMT_FLAT_ARGVP_ENVP_ON_STACK
 	select BUILDTIME_TABLE_SORT if MMU
+	select COMMON_CLK if !(ARCH_RPC || ARCH_FOOTBRIDGE)
 	select CLONE_BACKWARDS
 	select CPU_PM if SUSPEND || CPU_IDLE
 	select DCACHE_WORD_ACCESS if HAVE_EFFICIENT_UNALIGNED_ACCESS
 	select DMA_DECLARE_COHERENT
 	select DMA_GLOBAL_POOL if !MMU
 	select DMA_OPS
-	select DMA_REMAP if MMU
+	select DMA_NONCOHERENT_MMAP if MMU
 	select EDAC_SUPPORT
 	select EDAC_ATOMIC_SCRUB
 	select GENERIC_ALLOCATOR
@@ -58,6 +59,7 @@ config ARM
 	select GENERIC_CPU_AUTOPROBE
 	select GENERIC_EARLY_IOREMAP
 	select GENERIC_IDLE_POLL_SETUP
+	select GENERIC_IRQ_MULTI_HANDLER
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
 	select GENERIC_IRQ_SHOW_LEVEL
@@ -72,6 +74,7 @@ config ARM
 	select HAVE_ARCH_KFENCE if MMU && !XIP_KERNEL
 	select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 && MMU
 	select HAVE_ARCH_KASAN if MMU && !XIP_KERNEL
+	select HAVE_ARCH_KASAN_VMALLOC if HAVE_ARCH_KASAN
 	select HAVE_ARCH_MMAP_RND_BITS if MMU
 	select HAVE_ARCH_PFN_VALID
 	select HAVE_ARCH_SECCOMP
@@ -81,7 +84,7 @@ config ARM
 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE if ARM_LPAE
 	select HAVE_ARM_SMCCC if CPU_V7
 	select HAVE_EBPF_JIT if !CPU_ENDIAN_BE32
-	select HAVE_CONTEXT_TRACKING
+	select HAVE_CONTEXT_TRACKING_USER
 	select HAVE_C_RECORDMCOUNT
 	select HAVE_BUILDTIME_MCOUNT_SORT
 	select HAVE_DEBUG_KMEMLEAK if !XIP_KERNEL
@@ -92,8 +95,8 @@ config ARM
 	select HAVE_EXIT_THREAD
 	select HAVE_FAST_GUP if ARM_LPAE
 	select HAVE_FTRACE_MCOUNT_RECORD if !XIP_KERNEL
-	select HAVE_FUNCTION_GRAPH_TRACER if !THUMB2_KERNEL && !CC_IS_CLANG
-	select HAVE_FUNCTION_TRACER if !XIP_KERNEL && !(THUMB2_KERNEL && CC_IS_CLANG)
+	select HAVE_FUNCTION_GRAPH_TRACER
+	select HAVE_FUNCTION_TRACER if !XIP_KERNEL
 	select HAVE_GCC_PLUGINS
 	select HAVE_HW_BREAKPOINT if PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)
 	select HAVE_IRQ_TIME_ACCOUNTING
@@ -107,6 +110,7 @@ config ARM
 	select HAVE_MOD_ARCH_SPECIFIC
 	select HAVE_NMI
 	select HAVE_OPTPROBES if !THUMB2_KERNEL
+	select HAVE_PCI if MMU
 	select HAVE_PERF_EVENTS
 	select HAVE_PERF_REGS
 	select HAVE_PERF_USER_STACK_DUMP
@@ -123,12 +127,17 @@ config ARM
 	select OF_EARLY_FLATTREE if OF
 	select OLD_SIGACTION
 	select OLD_SIGSUSPEND3
+	select PCI_DOMAINS_GENERIC if PCI
 	select PCI_SYSCALL if PCI
 	select PERF_USE_VMALLOC
 	select RTC_LIB
+	select SPARSE_IRQ if !(ARCH_FOOTBRIDGE || ARCH_RPC)
 	select SYS_SUPPORTS_APM_EMULATION
-	select THREAD_INFO_IN_TASK if CURRENT_POINTER_IN_TPIDRURO
+	select THREAD_INFO_IN_TASK
+	select TIMER_OF if OF
+	select HAVE_ARCH_VMAP_STACK if MMU && ARM_HAS_GROUP_RELOCS
 	select TRACE_IRQFLAGS_SUPPORT if !CPU_V7M
+	select USE_OF if !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100)
 	# Above selects are sorted alphabetically; please add new ones
 	# according to that.  Thanks.
 	help
@@ -139,12 +148,19 @@ config ARM
 	  Europe.  There is an ARM Linux project with a web page at
 	  <http://www.arm.linux.org.uk/>.
 
-config ARM_HAS_SG_CHAIN
-	bool
+config ARM_HAS_GROUP_RELOCS
+	def_bool y
+	depends on !LD_IS_LLD || LLD_VERSION >= 140000
+	depends on !COMPILE_TEST
+	help
+	  Whether or not to use R_ARM_ALU_PC_Gn or R_ARM_LDR_PC_Gn group
+	  relocations, which have been around for a long time, but were not
+	  supported in LLD until version 14. The combined range is -/+ 256 MiB,
+	  which is usually sufficient, but not for allyesconfig, so we disable
+	  this feature when doing compile testing.
 
 config ARM_DMA_USE_IOMMU
 	bool
-	select ARM_HAS_SG_CHAIN
 	select NEED_SG_DMA_LENGTH
 
 if ARM_DMA_USE_IOMMU
@@ -218,25 +234,19 @@ config ARCH_MAY_HAVE_PC_FDC
 config ARCH_SUPPORTS_UPROBES
 	def_bool y
 
-config ARCH_HAS_DMA_SET_COHERENT_MASK
-	bool
-
 config GENERIC_ISA_DMA
 	bool
 
 config FIQ
 	bool
 
-config NEED_RET_TO_USER
-	bool
-
 config ARCH_MTD_XIP
 	bool
 
 config ARM_PATCH_PHYS_VIRT
 	bool "Patch physical to virtual translations at runtime" if EMBEDDED
 	default y
-	depends on !XIP_KERNEL && MMU
+	depends on MMU
 	help
 	  Patch phys-to-virt and virt-to-phys translation functions at
 	  boot and module load time according to the position of the
@@ -265,9 +275,9 @@ config NEED_MACH_MEMORY_H
 
 config PHYS_OFFSET
 	hex "Physical address of main memory" if MMU
-	depends on !ARM_PATCH_PHYS_VIRT
+	depends on !ARM_PATCH_PHYS_VIRT || !AUTO_ZRELADDR
 	default DRAM_BASE if !MMU
-	default 0x00000000 if ARCH_FOOTBRIDGE || ARCH_IXP4XX
+	default 0x00000000 if ARCH_FOOTBRIDGE
 	default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
 	default 0x30000000 if ARCH_S3C24XX
 	default 0xa0000000 if ARCH_IOP32X || ARCH_PXA
@@ -295,6 +305,12 @@ config MMU
 	  Select if you want MMU-based virtualised addressing space
 	  support by paged memory management. If unsure, say 'Y'.
 
+config ARM_SINGLE_ARMV7M
+	def_bool !MMU
+	select ARM_NVIC
+	select CPU_V7M
+	select NO_IOPORT_MAP
+
 config ARCH_MMAP_RND_BITS_MIN
 	default 8
 
@@ -303,222 +319,31 @@ config ARCH_MMAP_RND_BITS_MAX
 	default 15 if PAGE_OFFSET=0x80000000
 	default 16
 
-#
-# The "ARM system type" choice list is ordered alphabetically by option
-# text.  Please add new entries in the option alphabetic order.
-#
-choice
-	prompt "ARM system type"
-	default ARM_SINGLE_ARMV7M if !MMU
-	default ARCH_MULTIPLATFORM if MMU
-
 config ARCH_MULTIPLATFORM
-	bool "Allow multiple platforms to be selected"
-	depends on MMU
-	select ARCH_FLATMEM_ENABLE
-	select ARCH_SPARSEMEM_ENABLE
-	select ARCH_SELECT_MEMORY_MODEL
-	select ARM_HAS_SG_CHAIN
-	select ARM_PATCH_PHYS_VIRT
-	select AUTO_ZRELADDR
-	select TIMER_OF
-	select COMMON_CLK
-	select GENERIC_IRQ_MULTI_HANDLER
-	select HAVE_PCI
-	select PCI_DOMAINS_GENERIC if PCI
-	select SPARSE_IRQ
-	select USE_OF
-
-config ARM_SINGLE_ARMV7M
-	bool "ARMv7-M based platforms (Cortex-M0/M3/M4)"
-	depends on !MMU
-	select ARM_NVIC
-	select AUTO_ZRELADDR
-	select TIMER_OF
-	select COMMON_CLK
-	select CPU_V7M
-	select NO_IOPORT_MAP
-	select SPARSE_IRQ
-	select USE_OF
-
-config ARCH_EP93XX
-	bool "EP93xx-based"
-	select ARCH_SPARSEMEM_ENABLE
-	select ARM_AMBA
-	imply ARM_PATCH_PHYS_VIRT
-	select ARM_VIC
-	select GENERIC_IRQ_MULTI_HANDLER
-	select AUTO_ZRELADDR
-	select CLKSRC_MMIO
-	select CPU_ARM920T
-	select GPIOLIB
-	select COMMON_CLK
+	bool "Require kernel to be portable to multiple machines" if EXPERT
+	depends on MMU && !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100)
+	default y
 	help
-	  This enables support for the Cirrus EP93xx series of CPUs.
+	  In general, all Arm machines can be supported in a single
+	  kernel image, covering either Armv4/v5 or Armv6/v7.
 
-config ARCH_FOOTBRIDGE
-	bool "FootBridge"
-	select CPU_SA110
-	select FOOTBRIDGE
-	select NEED_MACH_IO_H if !MMU
-	select NEED_MACH_MEMORY_H
-	help
-	  Support for systems based on the DC21285 companion chip
-	  ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
+	  However, some configuration options require hardcoding machine
+	  specific physical addresses or enable errata workarounds that may
+	  break other machines.
 
-config ARCH_IOP32X
-	bool "IOP32x-based"
-	depends on MMU
-	select CPU_XSCALE
-	select GPIO_IOP
-	select GPIOLIB
-	select NEED_RET_TO_USER
-	select FORCE_PCI
-	select PLAT_IOP
-	help
-	  Support for Intel's 80219 and IOP32X (XScale) family of
-	  processors.
-
-config ARCH_IXP4XX
-	bool "IXP4xx-based"
-	depends on MMU
-	select ARCH_HAS_DMA_SET_COHERENT_MASK
-	select ARCH_SUPPORTS_BIG_ENDIAN
-	select CPU_XSCALE
-	select DMABOUNCE if PCI
-	select GENERIC_IRQ_MULTI_HANDLER
-	select GPIO_IXP4XX
-	select GPIOLIB
-	select HAVE_PCI
-	select IXP4XX_IRQ
-	select IXP4XX_TIMER
-	# With the new PCI driver this is not needed
-	select NEED_MACH_IO_H if IXP4XX_PCI_LEGACY
-	select USB_EHCI_BIG_ENDIAN_DESC
-	select USB_EHCI_BIG_ENDIAN_MMIO
-	help
-	  Support for Intel's IXP4XX (XScale) family of processors.
-
-config ARCH_DOVE
-	bool "Marvell Dove"
-	select CPU_PJ4
-	select GENERIC_IRQ_MULTI_HANDLER
-	select GPIOLIB
-	select HAVE_PCI
-	select MVEBU_MBUS
-	select PINCTRL
-	select PINCTRL_DOVE
-	select PLAT_ORION_LEGACY
-	select SPARSE_IRQ
-	select PM_GENERIC_DOMAINS if PM
-	help
-	  Support for the Marvell Dove SoC 88AP510
-
-config ARCH_PXA
-	bool "PXA2xx/PXA3xx-based"
-	depends on MMU
-	select ARCH_MTD_XIP
-	select ARM_CPU_SUSPEND if PM
-	select AUTO_ZRELADDR
-	select COMMON_CLK
-	select CLKSRC_PXA
-	select CLKSRC_MMIO
-	select TIMER_OF
-	select CPU_XSCALE if !CPU_XSC3
-	select GENERIC_IRQ_MULTI_HANDLER
-	select GPIO_PXA
-	select GPIOLIB
-	select IRQ_DOMAIN
-	select PLAT_PXA
-	select SPARSE_IRQ
-	help
-	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
+	  Selecting N here allows using those options, including
+	  DEBUG_UNCOMPRESS, XIP_KERNEL and ZBOOT_ROM. If unsure, say Y.
 
-config ARCH_RPC
-	bool "RiscPC"
+menu "Platform selection"
 	depends on MMU
-	depends on !CC_IS_CLANG && GCC_VERSION < 90100 && GCC_VERSION >= 60000
-	select ARCH_ACORN
-	select ARCH_MAY_HAVE_PC_FDC
-	select ARCH_SPARSEMEM_ENABLE
-	select ARM_HAS_SG_CHAIN
-	select CPU_SA110
-	select FIQ
-	select HAVE_PATA_PLATFORM
-	select ISA_DMA_API
-	select LEGACY_TIMER_TICK
-	select NEED_MACH_IO_H
-	select NEED_MACH_MEMORY_H
-	select NO_IOPORT_MAP
-	help
-	  On the Acorn Risc-PC, Linux can support the internal IDE disk and
-	  CD-ROM interface, serial and parallel port, and the floppy drive.
-
-config ARCH_SA1100
-	bool "SA1100-based"
-	select ARCH_MTD_XIP
-	select ARCH_SPARSEMEM_ENABLE
-	select CLKSRC_MMIO
-	select CLKSRC_PXA
-	select TIMER_OF if OF
-	select COMMON_CLK
-	select CPU_FREQ
-	select CPU_SA1100
-	select GENERIC_IRQ_MULTI_HANDLER
-	select GPIOLIB
-	select IRQ_DOMAIN
-	select ISA
-	select NEED_MACH_MEMORY_H
-	select SPARSE_IRQ
-	help
-	  Support for StrongARM 11x0 based boards.
-
-config ARCH_S3C24XX
-	bool "Samsung S3C24XX SoCs"
-	select ATAGS
-	select CLKSRC_SAMSUNG_PWM
-	select GPIO_SAMSUNG
-	select GPIOLIB
-	select GENERIC_IRQ_MULTI_HANDLER
-	select NEED_MACH_IO_H
-	select S3C2410_WATCHDOG
-	select SAMSUNG_ATAGS
-	select USE_OF
-	select WATCHDOG
-	help
-	  Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
-	  and S3C2450 SoCs based systems, such as the Simtec Electronics BAST
-	  (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the
-	  Samsung SMDK2410 development board (and derivatives).
-
-config ARCH_OMAP1
-	bool "TI OMAP1"
-	depends on MMU
-	select ARCH_OMAP
-	select CLKSRC_MMIO
-	select GENERIC_IRQ_CHIP
-	select GENERIC_IRQ_MULTI_HANDLER
-	select GPIOLIB
-	select HAVE_LEGACY_CLK
-	select IRQ_DOMAIN
-	select NEED_MACH_IO_H if PCCARD
-	select NEED_MACH_MEMORY_H
-	select SPARSE_IRQ
-	help
-	  Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
-
-endchoice
-
-menu "Multiple platform selection"
-	depends on ARCH_MULTIPLATFORM
 
 comment "CPU Core family selection"
 
 config ARCH_MULTI_V4
-	bool "ARMv4 based platforms (FA526)"
+	bool "ARMv4 based platforms (FA526, StrongARM)"
 	depends on !ARCH_MULTI_V6_V7
 	select ARCH_MULTI_V4_V5
-	select CPU_FA526
+	select CPU_FA526 if !(CPU_SA110 || CPU_SA1100)
 
 config ARCH_MULTI_V4T
 	bool "ARMv4T based platforms (ARM720T, ARM920T, ...)"
@@ -571,7 +396,17 @@ config ARCH_VIRT
 	select ARM_GIC_V3_ITS if PCI
 	select ARM_PSCI
 	select HAVE_ARM_ARCH_TIMER
-	select ARCH_SUPPORTS_BIG_ENDIAN
+
+config ARCH_AIROHA
+	bool "Airoha SoC Support"
+	depends on ARCH_MULTI_V7
+	select ARM_AMBA
+	select ARM_GIC
+	select ARM_GIC_V3
+	select ARM_PSCI
+	select HAVE_ARM_ARCH_TIMER
+	help
+	  Support for Airoha EN7523 SoCs
 
 #
 # This is sorted alphabetically by mach-* pathname.  However, plat-*
@@ -618,9 +453,9 @@ source "arch/arm/mach-highbank/Kconfig"
 
 source "arch/arm/mach-hisi/Kconfig"
 
-source "arch/arm/mach-imx/Kconfig"
+source "arch/arm/mach-hpe/Kconfig"
 
-source "arch/arm/mach-integrator/Kconfig"
+source "arch/arm/mach-imx/Kconfig"
 
 source "arch/arm/mach-iop32x/Kconfig"
 
@@ -654,8 +489,6 @@ source "arch/arm/mach-npcm/Kconfig"
 
 source "arch/arm/mach-nspire/Kconfig"
 
-source "arch/arm/plat-omap/Kconfig"
-
 source "arch/arm/mach-omap1/Kconfig"
 
 source "arch/arm/mach-omap2/Kconfig"
@@ -665,7 +498,6 @@ source "arch/arm/mach-orion5x/Kconfig"
 source "arch/arm/mach-oxnas/Kconfig"
 
 source "arch/arm/mach-pxa/Kconfig"
-source "arch/arm/plat-pxa/Kconfig"
 
 source "arch/arm/mach-qcom/Kconfig"
 
@@ -673,7 +505,7 @@ source "arch/arm/mach-rda/Kconfig"
 
 source "arch/arm/mach-realtek/Kconfig"
 
-source "arch/arm/mach-realview/Kconfig"
+source "arch/arm/mach-rpc/Kconfig"
 
 source "arch/arm/mach-rockchip/Kconfig"
 
@@ -693,6 +525,8 @@ source "arch/arm/mach-sti/Kconfig"
 
 source "arch/arm/mach-stm32/Kconfig"
 
+source "arch/arm/mach-sunplus/Kconfig"
+
 source "arch/arm/mach-sunxi/Kconfig"
 
 source "arch/arm/mach-tegra/Kconfig"
@@ -703,8 +537,6 @@ source "arch/arm/mach-ux500/Kconfig"
 
 source "arch/arm/mach-versatile/Kconfig"
 
-source "arch/arm/mach-vexpress/Kconfig"
-
 source "arch/arm/mach-vt8500/Kconfig"
 
 source "arch/arm/mach-zynq/Kconfig"
@@ -737,13 +569,9 @@ config ARCH_MPS2
 config ARCH_ACORN
 	bool
 
-config PLAT_IOP
-	bool
-
 config PLAT_ORION
 	bool
 	select CLKSRC_MMIO
-	select COMMON_CLK
 	select GENERIC_IRQ_CHIP
 	select IRQ_DOMAIN
 
@@ -751,9 +579,6 @@ config PLAT_ORION_LEGACY
 	bool
 	select PLAT_ORION
 
-config PLAT_PXA
-	bool
-
 config PLAT_VERSATILE
 	bool
 
@@ -970,6 +795,17 @@ config ARM_ERRATA_764369
 	  relevant cache maintenance functions and sets a specific bit
 	  in the diagnostic control register of the SCU.
 
+config ARM_ERRATA_764319
+	bool "ARM errata: Read to DBGPRSR and DBGOSLSR may generate Undefined instruction"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 764319 Cortex A-9 erratum.
+	  CP14 read accesses to the DBGPRSR and DBGOSLSR registers generate an
+	  unexpected Undefined Instruction exception when the DBGSWENABLE
+	  external pin is set to 0, even when the CP14 accesses are performed
+	  from a privileged mode. This work around catches the exception in a
+	  way the kernel does not stop execution.
+
 config ARM_ERRATA_775420
        bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock"
        depends on CPU_V7
@@ -1086,11 +922,6 @@ config ISA
 	  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
 	  newer boards don't support it.  If you have ISA, say Y, otherwise N.
 
-# Select ISA DMA controller support
-config ISA_DMA
-	bool
-	select ISA_DMA_API
-
 # Select ISA DMA interface
 config ISA_DMA_API
 	bool
@@ -1151,7 +982,7 @@ config SMP
 
 config SMP_ON_UP
 	bool "Allow booting SMP kernel on uniprocessor systems"
-	depends on SMP && !XIP_KERNEL && MMU
+	depends on SMP && MMU
 	default y
 	help
 	  SMP kernels contain instructions which fail on non-SMP processors.
@@ -1164,7 +995,12 @@ config SMP_ON_UP
 
 config CURRENT_POINTER_IN_TPIDRURO
 	def_bool y
-	depends on SMP && CPU_32v6K && !CPU_V6
+	depends on CPU_32v6K && !CPU_V6
+
+config IRQSTACKS
+	def_bool y
+	select HAVE_IRQ_EXIT_ON_IRQ_STACK
+	select HAVE_SOFTIRQ_ON_OWN_STACK
 
 config ARM_CPU_TOPOLOGY
 	bool "Support cpu topology definition"
@@ -1395,7 +1231,7 @@ config THUMB2_KERNEL
 
 config ARM_PATCH_IDIV
 	bool "Runtime patch udiv/sdiv instructions into __aeabi_{u}idiv()"
-	depends on CPU_32v7 && !XIP_KERNEL
+	depends on CPU_32v7
 	default y
 	help
 	  The ARM compiler inserts calls to __aeabi_idiv() and
@@ -1450,13 +1286,13 @@ config OABI_COMPAT
 	  at all). If in doubt say N.
 
 config ARCH_SELECT_MEMORY_MODEL
-	bool
+	def_bool y
 
 config ARCH_FLATMEM_ENABLE
-	bool
+	def_bool !(ARCH_RPC || ARCH_SA1100)
 
 config ARCH_SPARSEMEM_ENABLE
-	bool
+	def_bool !ARCH_FOOTBRIDGE
 	select SPARSEMEM_STATIC if SPARSEMEM
 
 config HIGHMEM
@@ -1508,12 +1344,10 @@ config HW_PERF_EVENTS
 	def_bool y
 	depends on ARM_PMU
 
-config ARCH_WANT_GENERAL_HUGETLB
-	def_bool y
-
 config ARM_MODULE_PLTS
 	bool "Use PLTs to allow module memory to spill over into vmalloc area"
 	depends on MODULES
+	select KASAN_VMALLOC if KASAN
 	default y
 	help
 	  Allocate PLTs when loading modules so that jumps and calls whose
@@ -1528,7 +1362,7 @@ config ARM_MODULE_PLTS
 	  Disabling this is usually safe for small single-platform
 	  configurations. If unsure, say y.
 
-config FORCE_MAX_ZONEORDER
+config ARCH_FORCE_MAX_ORDER
 	int "Maximum zone order"
 	default "12" if SOC_AM33XX
 	default "9" if SA1111
@@ -1608,10 +1442,14 @@ config XEN
 	help
 	  Say Y if you want to run Linux in a Virtual Machine on Xen on ARM.
 
+config CC_HAVE_STACKPROTECTOR_TLS
+	def_bool $(cc-option,-mtp=cp15 -mstack-protector-guard=tls -mstack-protector-guard-offset=0)
+
 config STACKPROTECTOR_PER_TASK
 	bool "Use a unique stack canary value for each task"
-	depends on GCC_PLUGINS && STACKPROTECTOR && THREAD_INFO_IN_TASK && !XIP_DEFLATED_DATA
-	select GCC_PLUGIN_ARM_SSP_PER_TASK
+	depends on STACKPROTECTOR && CURRENT_POINTER_IN_TPIDRURO && !XIP_DEFLATED_DATA
+	depends on GCC_PLUGINS || CC_HAVE_STACKPROTECTOR_TLS
+	select GCC_PLUGIN_ARM_SSP_PER_TASK if !CC_HAVE_STACKPROTECTOR_TLS
 	default y
 	help
 	  Due to the fact that GCC uses an ordinary symbol reference from
@@ -1635,14 +1473,26 @@ config USE_OF
 	  Include support for flattened device tree machine descriptions.
 
 config ATAGS
-	bool "Support for the traditional ATAGS boot data passing" if USE_OF
+	bool "Support for the traditional ATAGS boot data passing"
 	default y
 	help
 	  This is the traditional way of passing data to the kernel at boot
 	  time. If you are solely relying on the flattened device tree (or
 	  the ARM_ATAG_DTB_COMPAT option) then you may unselect this option
-	  to remove ATAGS support from your kernel binary.  If unsure,
-	  leave this to y.
+	  to remove ATAGS support from your kernel binary.
+
+config UNUSED_BOARD_FILES
+	bool "Board support for machines without known users"
+	depends on ATAGS
+	help
+	  Most ATAGS based board files are completely unused and are
+	  scheduled for removal in early 2023, and left out of kernels
+	  by default now.  If you are using a board file that is marked
+	  as unused, turn on this option to build support into the kernel.
+
+	  To keep support for your individual board from being removed,
+	  send a reply to the email discussion at
+	  https://lore.kernel.org/all/CAK8P3a0Z9vGEQbVRBo84bSyPFM-LF+hs5w8ZA51g2Z+NsdtDQA@mail.gmail.com/
 
 config DEPRECATED_PARAM_STRUCT
 	bool "Provide old way to pass kernel parameters"
@@ -1749,7 +1599,6 @@ config CMDLINE
 choice
 	prompt "Kernel command line type" if CMDLINE != ""
 	default CMDLINE_FROM_BOOTLOADER
-	depends on ATAGS
 
 config CMDLINE_FROM_BOOTLOADER
 	bool "Use bootloader kernel arguments if available"
@@ -1776,6 +1625,7 @@ endchoice
 config XIP_KERNEL
 	bool "Kernel Execute-In-Place from ROM"
 	depends on !ARM_LPAE && !ARCH_MULTIPLATFORM
+	depends on !ARM_PATCH_IDIV && !ARM_PATCH_PHYS_VIRT && !SMP_ON_UP
 	help
 	  Execute-In-Place allows the kernel to run from non-volatile storage
 	  directly addressable by the CPU, such as NOR flash. This saves RAM
@@ -1850,7 +1700,8 @@ config CRASH_DUMP
 	  For more details see Documentation/admin-guide/kdump/kdump.rst
 
 config AUTO_ZRELADDR
-	bool "Auto calculation of the decompressed kernel image address"
+	bool "Auto calculation of the decompressed kernel image address" if !ARCH_MULTIPLATFORM
+	default !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100)
 	help
 	  ZRELADDR is the physical address where the decompressed kernel
 	  image will be placed. If AUTO_ZRELADDR is selected, the address
@@ -1999,8 +1850,4 @@ config ARCH_HIBERNATION_POSSIBLE
 
 endmenu
 
-if CRYPTO
-source "arch/arm/crypto/Kconfig"
-endif
-
 source "arch/arm/Kconfig.assembler"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 976315dea958..c345775f035b 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -65,7 +65,7 @@ config UNWINDER_FRAME_POINTER
 
 config UNWINDER_ARM
 	bool "ARM EABI stack unwinder"
-	depends on AEABI && !FUNCTION_GRAPH_TRACER
+	depends on AEABI
 	select ARM_UNWIND
 	help
 	  This option enables stack unwinding support in the kernel
@@ -210,6 +210,26 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on the FLEXCOM3 port of SAMA7G5.
 
+	config DEBUG_AT91_LAN966_FLEXCOM
+		bool "Kernel low-level debugging on LAN966 FLEXCOM USART"
+		select DEBUG_AT91_UART
+		depends on SOC_LAN966
+		help
+		Say Y here if you want kernel low-level debugging support
+		on the FLEXCOM port of LAN966.
+
+		DEBUG_UART_PHYS | DEBUG_UART_VIRT
+
+		0xe0040200      | 0xfd040200     | FLEXCOM0
+		0xe0044200      | 0xfd044200     | FLEXCOM1
+		0xe0060200      | 0xfd060200     | FLEXCOM2
+		0xe0064200      | 0xfd064200     | FLEXCOM3
+		0xe0070200      | 0xfd070200     | FLEXCOM4
+
+		By default, enabling FLEXCOM3 port. Based on requirement, use
+		DEBUG_UART_PHYS and DEBUG_UART_VIRT configurations from above
+		table.
+
 	config DEBUG_BCM2835
 		bool "Kernel low-level debugging on BCM2835 PL011 UART"
 		depends on ARCH_BCM2835 && ARCH_MULTI_V6
@@ -251,7 +271,7 @@ choice
 
 	config DEBUG_BCM63XX_UART
 		bool "Kernel low-level debugging on BCM63XX UART"
-		depends on ARCH_BCM_63XX
+		depends on ARCH_BCMBCA
 
 	config DEBUG_BERLIN_UART
 		bool "Marvell Berlin SoC Debug UART"
@@ -1685,6 +1705,7 @@ config DEBUG_UART_PHYS
 	default 0xd4017000 if DEBUG_MMP_UART2
 	default 0xd4018000 if DEBUG_MMP_UART3
 	default 0xe0000000 if DEBUG_SPEAR13XX
+	default 0xe0064200 if DEBUG_AT91_LAN966_FLEXCOM
 	default 0xe1824200 if DEBUG_AT91_SAMA7G5_FLEXCOM3
 	default 0xe4007000 if DEBUG_HIP04_UART
 	default 0xe6c40000 if DEBUG_RMOBILE_SCIFA0
@@ -1805,6 +1826,7 @@ config DEBUG_UART_VIRT
 	default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
 	default 0xfcfe8600 if DEBUG_BCM63XX_UART
 	default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX
+	default 0xfd064200 if DEBUG_AT91_LAN966_FLEXCOM
 	default 0xfd531000 if DEBUG_STIH41X_SBC_ASC1
 	default 0xfd883000 if DEBUG_ALPINE_UART0
 	default 0xfdd32000 if DEBUG_STIH41X_ASC2
@@ -1837,9 +1859,9 @@ config DEBUG_UART_VIRT
 	default 0xfec00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
 	default 0xfec00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
 	default 0xfef36000 if DEBUG_HIGHBANK_UART
-	default 0xfefb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
-	default 0xfefb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
-	default 0xfefb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
+	default 0xff0b0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
+	default 0xff0b0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
+	default 0xff0b9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
 	default 0xffd01000 if DEBUG_HIP01_UART
 	default DEBUG_UART_PHYS if !MMU
 	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
@@ -1882,7 +1904,8 @@ config DEBUG_UART_8250_PALMCHIP
 
 config DEBUG_UNCOMPRESS
 	bool "Enable decompressor debugging via DEBUG_LL output"
-	depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG || ARM_SINGLE_ARMV7M
+	depends on !ARCH_MULTIPLATFORM
+	depends on !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100)
 	depends on DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
 		     (!DEBUG_TEGRA_UART || !ZBOOT_ROM) && \
 		     !DEBUG_BRCMSTB_UART && !DEBUG_SEMIHOSTING
@@ -1899,9 +1922,8 @@ config DEBUG_UNCOMPRESS
 
 config UNCOMPRESS_INCLUDE
 	string
-	default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \
-					PLAT_SAMSUNG || ARM_SINGLE_ARMV7M
-	default "mach/uncompress.h"
+	default "mach/uncompress.h" if ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100
+	default "debug/uncompress.h"
 
 config EARLY_PRINTK
 	bool "Early printk"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 77172d555c7e..c846119c448f 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -22,6 +22,9 @@ GZFLAGS		:=-9
 # Never generate .eh_frame
 KBUILD_CFLAGS	+= $(call cc-option,-fno-dwarf2-cfi-asm)
 
+# Disable FDPIC ABI
+KBUILD_CFLAGS	+= $(call cc-option,-mno-fdpic)
+
 # This should work on most of the modern platforms
 KBUILD_DEFCONFIG := multi_v7_defconfig
 
@@ -134,9 +137,6 @@ KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(AFLAGS_ISA) $(arch-y) $(tune-y) -include asm/uni
 
 CHECKFLAGS	+= -D__arm__
 
-#Default value
-head-y		:= arch/arm/kernel/head$(MMUEXT).o
-
 # Text offset. This list is sorted numerically by address in order to
 # provide a means to avoid/resolve conflicts in multi-arch kernels.
 # Note: the 32kB below this value is reserved for use by the kernel
@@ -160,6 +160,7 @@ textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
 # Machine directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
 machine-$(CONFIG_ARCH_ACTIONS)		+= actions
+machine-$(CONFIG_ARCH_AIROHA)		+= airoha
 machine-$(CONFIG_ARCH_ALPINE)		+= alpine
 machine-$(CONFIG_ARCH_ARTPEC)		+= artpec
 machine-$(CONFIG_ARCH_ASPEED)           += aspeed
@@ -178,7 +179,7 @@ machine-$(CONFIG_ARCH_FOOTBRIDGE)	+= footbridge
 machine-$(CONFIG_ARCH_GEMINI)		+= gemini
 machine-$(CONFIG_ARCH_HIGHBANK)		+= highbank
 machine-$(CONFIG_ARCH_HISI)		+= hisi
-machine-$(CONFIG_ARCH_INTEGRATOR)	+= integrator
+machine-$(CONFIG_ARCH_HPE)		+= hpe
 machine-$(CONFIG_ARCH_IOP32X)		+= iop32x
 machine-$(CONFIG_ARCH_IXP4XX)		+= ixp4xx
 machine-$(CONFIG_ARCH_KEYSTONE)		+= keystone
@@ -186,7 +187,6 @@ machine-$(CONFIG_ARCH_LPC18XX)		+= lpc18xx
 machine-$(CONFIG_ARCH_LPC32XX)		+= lpc32xx
 machine-$(CONFIG_ARCH_MESON)		+= meson
 machine-$(CONFIG_ARCH_MMP)		+= mmp
-machine-$(CONFIG_ARCH_MPS2)		+= vexpress
 machine-$(CONFIG_ARCH_MOXART)		+= moxart
 machine-$(CONFIG_ARCH_MV78XX0)		+= mv78xx0
 machine-$(CONFIG_ARCH_MVEBU)		+= mvebu
@@ -206,7 +206,6 @@ machine-$(CONFIG_ARCH_PXA)		+= pxa
 machine-$(CONFIG_ARCH_QCOM)		+= qcom
 machine-$(CONFIG_ARCH_RDA)		+= rda
 machine-$(CONFIG_ARCH_REALTEK)		+= realtek
-machine-$(CONFIG_ARCH_REALVIEW)		+= realview
 machine-$(CONFIG_ARCH_ROCKCHIP)		+= rockchip
 machine-$(CONFIG_ARCH_RPC)		+= rpc
 machine-$(CONFIG_PLAT_SAMSUNG)		+= s3c
@@ -216,52 +215,33 @@ machine-$(CONFIG_ARCH_RENESAS)	 	+= shmobile
 machine-$(CONFIG_ARCH_INTEL_SOCFPGA)	+= socfpga
 machine-$(CONFIG_ARCH_STI)		+= sti
 machine-$(CONFIG_ARCH_STM32)		+= stm32
+machine-$(CONFIG_ARCH_SUNPLUS)		+= sunplus
 machine-$(CONFIG_ARCH_SUNXI)		+= sunxi
 machine-$(CONFIG_ARCH_TEGRA)		+= tegra
 machine-$(CONFIG_ARCH_U8500)		+= ux500
-machine-$(CONFIG_ARCH_VERSATILE)	+= versatile
-machine-$(CONFIG_ARCH_VEXPRESS)		+= vexpress
 machine-$(CONFIG_ARCH_VT8500)		+= vt8500
 machine-$(CONFIG_ARCH_ZYNQ)		+= zynq
+machine-$(CONFIG_PLAT_VERSATILE)	+= versatile
 machine-$(CONFIG_PLAT_SPEAR)		+= spear
 
-# Platform directory name.  This list is sorted alphanumerically
-# by CONFIG_* macro name.
-plat-$(CONFIG_ARCH_OMAP)	+= omap
-plat-$(CONFIG_PLAT_ORION)	+= orion
-plat-$(CONFIG_PLAT_PXA)		+= pxa
-plat-$(CONFIG_PLAT_VERSATILE)	+= versatile
+# legacy platforms provide their own mach/*.h headers globally,
+# these three are mutually exclusive
+machdirs-$(CONFIG_ARCH_FOOTBRIDGE)	+= arch/arm/mach-footbridge
+machdirs-$(CONFIG_ARCH_RPC)		+= arch/arm/mach-rpc
+machdirs-$(CONFIG_ARCH_SA1100)		+= arch/arm/mach-sa1100
+KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%/include,$(machdirs-y))
 
 # The byte offset of the kernel image in RAM from the start of RAM.
 TEXT_OFFSET := $(textofs-y)
 
-# The first directory contains additional information for the boot setup code
-ifneq ($(machine-y),)
-MACHINE  := arch/arm/mach-$(word 1,$(machine-y))/
-else
-MACHINE  :=
-endif
-ifeq ($(CONFIG_ARCH_MULTIPLATFORM),y)
-MACHINE  :=
-endif
-
-machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
-platdirs := $(patsubst %,arch/arm/plat-%/,$(sort $(plat-y)))
-
-ifneq ($(CONFIG_ARCH_MULTIPLATFORM),y)
-ifneq ($(CONFIG_ARM_SINGLE_ARMV7M),y)
-KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs) $(platdirs))
-endif
-endif
-
 export	TEXT_OFFSET GZFLAGS MMUEXT
 
 # If we have a machine-specific directory, then include it in the build.
-core-y				+= $(machdirs) $(platdirs)
-
+core-y				+= $(patsubst %,arch/arm/mach-%/,$(machine-y))
 # For cleaning
-core-				+= $(patsubst %,arch/arm/mach-%/, $(machine-))
-core-				+= $(patsubst %,arch/arm/plat-%/, $(plat-))
+core-				+= $(patsubst %,arch/arm/mach-%/,$(machine-))
+
+core-$(CONFIG_PLAT_ORION)	+= arch/arm/plat-orion/
 
 libs-y				:= arch/arm/lib/ $(libs-y)
 
@@ -275,6 +255,14 @@ endif
 
 ifeq ($(CONFIG_STACKPROTECTOR_PER_TASK),y)
 prepare: stack_protector_prepare
+ifeq ($(CONFIG_CC_HAVE_STACKPROTECTOR_TLS),y)
+stack_protector_prepare: prepare0
+	$(eval KBUILD_CFLAGS += \
+		-mstack-protector-guard=tls \
+		-mstack-protector-guard-offset=$(shell	\
+			awk '{if ($$2 == "TSK_STACK_CANARY") print $$3;}'\
+				include/generated/asm-offsets.h))
+else
 stack_protector_prepare: prepare0
 	$(eval SSP_PLUGIN_CFLAGS := \
 		-fplugin-arg-arm_ssp_per_task_plugin-offset=$(shell	\
@@ -283,6 +271,7 @@ stack_protector_prepare: prepare0
 	$(eval KBUILD_CFLAGS += $(SSP_PLUGIN_CFLAGS))
 	$(eval GCC_PLUGINS_CFLAGS += $(SSP_PLUGIN_CFLAGS))
 endif
+endif
 
 all:	$(notdir $(KBUILD_IMAGE))
 
@@ -305,12 +294,12 @@ bootpImage uImage: zImage
 zImage: Image
 
 $(BOOT_TARGETS): vmlinux
-	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
+	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 	@$(kecho) '  Kernel: $(boot)/$@ is ready'
 
+$(INSTALL_TARGETS): KBUILD_IMAGE = $(boot)/$(patsubst %install,%Image,$@)
 $(INSTALL_TARGETS):
-	$(CONFIG_SHELL) $(srctree)/$(boot)/install.sh "$(KERNELRELEASE)" \
-	$(boot)/$(patsubst %install,%Image,$@) System.map "$(INSTALL_PATH)"
+	$(call cmd,install)
 
 PHONY += vdso_install
 vdso_install:
@@ -319,7 +308,7 @@ ifeq ($(CONFIG_VDSO),y)
 endif
 
 # My testing targets (bypasses dependencies)
-bp:;	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/bootpImage
+bp:;	$(Q)$(MAKE) $(build)=$(boot) $(boot)/bootpImage
 
 
 define archhelp
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index 54a09f9464fb..abd6a2889fd0 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -10,22 +10,16 @@
 #
 # Copyright (C) 1995-2002 Russell King
 #
-
 OBJCOPYFLAGS	:=-O binary -R .comment -S
 
-ifneq ($(MACHINE),)
-include $(MACHINE)/Makefile.boot
-endif
-
-# Note: the following conditions must always be true:
 #   ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET)
-#   PARAMS_PHYS must be within 4MB of ZRELADDR
-#   INITRD_PHYS must be in RAM
-ZRELADDR    := $(zreladdr-y)
-PARAMS_PHYS := $(params_phys-y)
-INITRD_PHYS := $(initrd_phys-y)
+ifdef CONFIG_PHYS_OFFSET
+add_hex = $(shell printf 0x%x $$(( $(1) + $(2) )) )
+ZRELADDR    := $(call add_hex, $(CONFIG_PHYS_OFFSET), $(TEXT_OFFSET))
+endif
 
-export ZRELADDR INITRD_PHYS PARAMS_PHYS
+PHYS_OFFSET := $(CONFIG_PHYS_OFFSET)
+export ZRELADDR PARAMS_PHYS PHYS_OFFSET
 
 targets := Image zImage xipImage bootpImage uImage
 
@@ -90,17 +84,10 @@ $(obj)/uImage:	$(obj)/zImage FORCE
 	@$(check_for_multiple_loadaddr)
 	$(call if_changed,uimage)
 
-$(obj)/bootp/bootp: $(obj)/zImage initrd FORCE
+$(obj)/bootp/bootp: $(obj)/zImage FORCE
 	$(Q)$(MAKE) $(build)=$(obj)/bootp $@
 
 $(obj)/bootpImage: $(obj)/bootp/bootp FORCE
 	$(call if_changed,objcopy)
 
-PHONY += initrd
-initrd:
-	@test "$(INITRD_PHYS)" != "" || \
-	(echo This machine does not support INITRD; exit -1)
-	@test "$(INITRD)" != "" || \
-	(echo You must specify INITRD; exit -1)
-
 subdir-	    := bootp compressed dts
diff --git a/arch/arm/boot/bootp/Makefile b/arch/arm/boot/bootp/Makefile
index 981a8d03f064..a2934e6fd89a 100644
--- a/arch/arm/boot/bootp/Makefile
+++ b/arch/arm/boot/bootp/Makefile
@@ -5,9 +5,40 @@
 # This file is included by the global makefile so that you can add your own
 # architecture-specific flags and dependencies.
 #
-
 GCOV_PROFILE	:= n
 
+ifdef PHYS_OFFSET
+add_hex = $(shell printf 0x%x $$(( $(1) + $(2) )) )
+
+# If PHYS_OFFSET is set, INITRD_PHYS and PARAMS_PHYS can be derived,
+# otherwise they must be passed on the command line.
+#
+# Note: the following conditions must always be true:
+#   PARAMS_PHYS must be within 4MB of ZRELADDR
+#   INITRD_PHYS must be in RAM
+
+PARAMS_PHYS := $(call add_hex, $(PHYS_OFFSET), 0x100)
+
+# guess an initrd location if possible
+initrd_offset-$(CONFIG_ARCH_FOOTBRIDGE)	+= 0x00800000
+initrd_offset-$(CONFIG_ARCH_SA1100)	+= 0x00800000
+initrd_offset-$(CONFIG_ARCH_RPC)	+= 0x08000000
+INITRD_OFFSET := $(initrd_offset-y)
+ifdef INITRD_OFFSET
+INITRD_PHYS := $(call add_hex, $(PHYS_OFFSET), $(INITRD_OFFSET))
+endif
+
+endif
+
+PHONY += initrd
+initrd:
+	@test "$(PARAMS_PHYS)" != "" || \
+	(echo bootpImage: You must specify PHYS_OFFSET of PARAMS_PHYS ; exit -1)
+	@test "$(INITRD_PHYS)" != "" || \
+	(echo bootpImage: You must specify INITRD_OFFSET or INITRD_PHYS ; exit -1)
+	@test "$(INITRD)" != "" || \
+	(echo bootpImage: You must specify INITRD; exit -1)
+
 LDFLAGS_bootp	:= --no-undefined -X \
 		 --defsym initrd_phys=$(INITRD_PHYS) \
 		 --defsym params_phys=$(PARAMS_PHYS) -T
@@ -24,6 +55,6 @@ $(obj)/bootp:	$(src)/bootp.lds $(addprefix $(obj)/,init.o kernel.o initrd.o) FOR
 
 $(obj)/kernel.o: arch/arm/boot/zImage FORCE
 
-$(obj)/initrd.o: $(INITRD) FORCE
+$(obj)/initrd.o: initrd $(INITRD) FORCE
 
 PHONY += $(INITRD)
diff --git a/arch/arm/boot/bootp/bootp.lds b/arch/arm/boot/bootp/bootp.lds
index fc54394f4340..160128186bf8 100644
--- a/arch/arm/boot/bootp/bootp.lds
+++ b/arch/arm/boot/bootp/bootp.lds
@@ -1,11 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  *  linux/arch/arm/boot/bootp/bootp.lds
  *
  *  Copyright (C) 2000-2002 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 OUTPUT_ARCH(arm)
 ENTRY(_start)
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 954eee8a785a..41bcbb460fac 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -92,10 +92,7 @@ ifeq ($(CONFIG_USE_OF),y)
 OBJS	+= $(libfdt_objs) fdt_check_mem_start.o
 endif
 
-# -fstack-protector-strong triggers protection checks in this code,
-# but it is being used too early to link to meaningful stack_chk logic.
-$(foreach o, $(libfdt_objs) atags_to_fdt.o fdt_check_mem_start.o, \
-	$(eval CFLAGS_$(o) := -I $(srctree)/scripts/dtc/libfdt -fno-stack-protector))
+OBJS	+= lib1funcs.o ashldi3.o bswapsdi2.o
 
 targets       := vmlinux vmlinux.lds piggy_data piggy.o \
 		 head.o $(OBJS)
@@ -103,6 +100,7 @@ targets       := vmlinux vmlinux.lds piggy_data piggy.o \
 KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING
 
 ccflags-y := -fpic $(call cc-option,-mno-single-pic-base,) -fno-builtin \
+	     -I$(srctree)/scripts/dtc/libfdt -fno-stack-protector \
 	     -I$(obj) $(DISABLE_ARM_SSP_PER_TASK_PLUGIN)
 ccflags-remove-$(CONFIG_FUNCTION_TRACER) += -pg
 asflags-y := -DZIMAGE
@@ -130,8 +128,6 @@ endif
 # Next argument is a linker script
 LDFLAGS_vmlinux += -T
 
-OBJS	+= lib1funcs.o ashldi3.o bswapsdi2.o
-
 # We need to prevent any GOTOFF relocs being used with references
 # to symbols in the .bss section since we cannot relocate them
 # independently from the rest at run time.  This can be achieved by
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index bf79f2f78d23..9f406e9c0ea6 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -67,11 +67,7 @@
 #if defined(CONFIG_ARCH_SA1100)
 		.macro	loadsp, rb, tmp1, tmp2
 		mov	\rb, #0x80000000	@ physical base address
-#ifdef CONFIG_DEBUG_LL_SER3
-		add	\rb, \rb, #0x00050000	@ Ser3
-#else
 		add	\rb, \rb, #0x00010000	@ Ser1
-#endif
 		.endm
 #else
 		.macro	loadsp,	rb, tmp1, tmp2
diff --git a/arch/arm/mach-ep93xx/include/mach/uncompress.h b/arch/arm/boot/compressed/misc-ep93xx.h
index b3ec1db988db..3dc942589cba 100644
--- a/arch/arm/mach-ep93xx/include/mach/uncompress.h
+++ b/arch/arm/boot/compressed/misc-ep93xx.h
@@ -1,55 +1,25 @@
 /* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
- * arch/arm/mach-ep93xx/include/mach/uncompress.h
- *
  * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
  */
 
-#include <mach/ep93xx-regs.h>
 #include <asm/mach-types.h>
 
-static unsigned char __raw_readb(unsigned int ptr)
-{
-	return *((volatile unsigned char *)ptr);
-}
-
-static unsigned int __raw_readl(unsigned int ptr)
+static inline unsigned int __raw_readl(unsigned int ptr)
 {
 	return *((volatile unsigned int *)ptr);
 }
 
-static void __raw_writeb(unsigned char value, unsigned int ptr)
+static inline void __raw_writeb(unsigned char value, unsigned int ptr)
 {
 	*((volatile unsigned char *)ptr) = value;
 }
 
-static void __raw_writel(unsigned int value, unsigned int ptr)
+static inline void __raw_writel(unsigned int value, unsigned int ptr)
 {
 	*((volatile unsigned int *)ptr) = value;
 }
 
-#define PHYS_UART_DATA		(CONFIG_DEBUG_UART_PHYS + 0x00)
-#define PHYS_UART_FLAG		(CONFIG_DEBUG_UART_PHYS + 0x18)
-#define UART_FLAG_TXFF		0x20
-
-static inline void putc(int c)
-{
-	int i;
-
-	for (i = 0; i < 10000; i++) {
-		/* Transmit fifo not full? */
-		if (!(__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF))
-			break;
-	}
-
-	__raw_writeb(c, PHYS_UART_DATA);
-}
-
-static inline void flush(void)
-{
-}
-
-
 /*
  * Some bootloaders don't turn off DMA from the ethernet MAC before
  * jumping to linux, which means that we might end up with bits of RX
@@ -59,7 +29,7 @@ static inline void flush(void)
 #define PHYS_ETH_SELF_CTL		0x80010020
 #define ETH_SELF_CTL_RESET		0x00000001
 
-static void ethernet_reset(void)
+static inline void ep93xx_ethernet_reset(void)
 {
 	unsigned int v;
 
@@ -76,15 +46,41 @@ static void ethernet_reset(void)
 #define TS72XX_WDT_FEED_PHYS_BASE	0x23c00000
 #define TS72XX_WDT_FEED_VAL		0x05
 
-static void __maybe_unused ts72xx_watchdog_disable(void)
+static inline void __maybe_unused ts72xx_watchdog_disable(void)
 {
 	__raw_writeb(TS72XX_WDT_FEED_VAL, TS72XX_WDT_FEED_PHYS_BASE);
 	__raw_writeb(0, TS72XX_WDT_CONTROL_PHYS_BASE);
 }
 
-static void arch_decomp_setup(void)
+static inline void ep93xx_decomp_setup(void)
 {
 	if (machine_is_ts72xx())
 		ts72xx_watchdog_disable();
-	ethernet_reset();
+
+	if (machine_is_adssphere() ||
+	    machine_is_edb9301() ||
+	    machine_is_edb9302() ||
+	    machine_is_edb9302a() ||
+	    machine_is_edb9302a() ||
+	    machine_is_edb9307() ||
+	    machine_is_edb9307a() ||
+	    machine_is_edb9307a() ||
+	    machine_is_edb9312() ||
+	    machine_is_edb9315() ||
+	    machine_is_edb9315a() ||
+	    machine_is_edb9315a() ||
+	    machine_is_gesbc9312() ||
+	    machine_is_micro9() ||
+	    machine_is_micro9l() ||
+	    machine_is_micro9m() ||
+	    machine_is_micro9s() ||
+	    machine_is_micro9m() ||
+	    machine_is_micro9l() ||
+	    machine_is_micro9s() ||
+	    machine_is_sim_one() ||
+	    machine_is_snapper_cl15() ||
+	    machine_is_ts72xx() ||
+	    machine_is_bk3() ||
+	    machine_is_vision_ep9307())
+		ep93xx_ethernet_reset();
 }
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index e1e9a5dde853..abfed1aa2baa 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -23,6 +23,9 @@ unsigned int __machine_arch_type;
 #include <linux/types.h>
 #include <linux/linkage.h>
 #include "misc.h"
+#ifdef CONFIG_ARCH_EP93XX
+#include "misc-ep93xx.h"
+#endif
 
 static void putstr(const char *ptr);
 
@@ -128,13 +131,6 @@ asmlinkage void __div0(void)
 	error("Attempting division by 0!");
 }
 
-const unsigned long __stack_chk_guard = 0x000a0dff;
-
-void __stack_chk_fail(void)
-{
-	error("stack-protector: Kernel stack is corrupted\n");
-}
-
 extern int do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x));
 
 
@@ -150,6 +146,9 @@ decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
 	free_mem_end_ptr	= free_mem_ptr_end_p;
 	__machine_arch_type	= arch_id;
 
+#ifdef CONFIG_ARCH_EP93XX
+	ep93xx_decomp_setup();
+#endif
 	arch_decomp_setup();
 
 	putstr("Uncompressing Linux...");
diff --git a/arch/arm/boot/compressed/vmlinux.lds.S b/arch/arm/boot/compressed/vmlinux.lds.S
index 1bcb68ac4b01..3fcb3e62dc56 100644
--- a/arch/arm/boot/compressed/vmlinux.lds.S
+++ b/arch/arm/boot/compressed/vmlinux.lds.S
@@ -23,6 +23,7 @@ SECTIONS
     *(.ARM.extab*)
     *(.note.*)
     *(.rel.*)
+    *(.printk_index)
     /*
      * Discard any r/w data - this produces a link error if we have any,
      * which is required for PIC decompression.  Local data generates
@@ -57,6 +58,7 @@ SECTIONS
     *(.rodata)
     *(.rodata.*)
     *(.data.rel.ro)
+    *(.data.rel.ro.*)
   }
   .piggydata : {
     *(.piggydata)
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 235ad559acb2..6aa7dc4db2fc 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -61,6 +61,7 @@ dtb-$(CONFIG_SOC_SAM_V7) += \
 	at91-sama5d2_icp.dtb \
 	at91-sama5d2_ptc_ek.dtb \
 	at91-sama5d2_xplained.dtb \
+	at91-sama5d3_eds.dtb \
 	at91-sama5d3_ksz9477_evb.dtb \
 	at91-sama5d3_xplained.dtb \
 	at91-dvk_som60.dtb \
@@ -79,6 +80,8 @@ dtb-$(CONFIG_SOC_SAM_V7) += \
 	at91-vinco.dtb
 dtb-$(CONFIG_SOC_SAMA7G5) += \
 	at91-sama7g5ek.dtb
+dtb-$(CONFIG_SOC_SP7021) += \
+	sunplus-sp7021-demo-v3.dtb
 dtb-$(CONFIG_ARCH_AXXIA) += \
 	axm5516-amarillo.dtb
 dtb-$(CONFIG_ARCH_BCM2835) += \
@@ -93,6 +96,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
 	bcm2837-rpi-3-b.dtb \
 	bcm2837-rpi-3-b-plus.dtb \
 	bcm2837-rpi-cm3-io3.dtb \
+	bcm2837-rpi-zero-2-w.dtb \
 	bcm2711-rpi-400.dtb \
 	bcm2711-rpi-4-b.dtb \
 	bcm2711-rpi-cm4-io.dtb \
@@ -102,6 +106,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
 	bcm4708-asus-rt-ac56u.dtb \
 	bcm4708-asus-rt-ac68u.dtb \
 	bcm4708-buffalo-wzr-1750dhp.dtb \
+	bcm4708-buffalo-wzr-1166dhp.dtb \
+	bcm4708-buffalo-wzr-1166dhp2.dtb \
 	bcm4708-linksys-ea6300-v1.dtb \
 	bcm4708-linksys-ea6500-v2.dtb \
 	bcm4708-luxul-xap-1510.dtb \
@@ -132,6 +138,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
 	bcm47094-luxul-xwr-3150-v1.dtb \
 	bcm47094-netgear-r8500.dtb \
 	bcm47094-phicomm-k3.dtb \
+	bcm53015-meraki-mr26.dtb \
 	bcm53016-meraki-mr32.dtb \
 	bcm94708.dtb \
 	bcm94709.dtb \
@@ -143,8 +150,6 @@ dtb-$(CONFIG_ARCH_BCM_53573) += \
 	bcm47189-luxul-xap-810.dtb \
 	bcm47189-tenda-ac9.dtb \
 	bcm947189acdbmr.dtb
-dtb-$(CONFIG_ARCH_BCM_63XX) += \
-	bcm963138dvt.dtb
 dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
 	bcm911360_entphn.dtb \
 	bcm911360k.dtb \
@@ -178,6 +183,16 @@ dtb-$(CONFIG_ARCH_BERLIN) += \
 	berlin2q-marvell-dmp.dtb
 dtb-$(CONFIG_ARCH_BRCMSTB) += \
 	bcm7445-bcm97445svmb.dtb
+dtb-$(CONFIG_ARCH_BCMBCA) += \
+	bcm947622.dtb \
+	bcm963138.dtb \
+	bcm963138dvt.dtb \
+	bcm963148.dtb \
+	bcm963178.dtb \
+	bcm96756.dtb \
+	bcm96846.dtb \
+	bcm96855.dtb \
+	bcm96878.dtb
 dtb-$(CONFIG_ARCH_CLPS711X) += \
 	ep7211-edb7211.dtb
 dtb-$(CONFIG_ARCH_DAVINCI) += \
@@ -187,6 +202,8 @@ dtb-$(CONFIG_ARCH_DAVINCI) += \
 	da850-lego-ev3.dtb
 dtb-$(CONFIG_ARCH_DIGICOLOR) += \
 	cx92755_equinox.dtb
+dtb-$(CONFIG_ARCH_AIROHA) += \
+	en7523-evb.dtb
 dtb-$(CONFIG_ARCH_EXYNOS3) += \
 	exynos3250-artik5-eval.dtb \
 	exynos3250-monk.dtb \
@@ -221,6 +238,8 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \
 	exynos5420-arndale-octa.dtb \
 	exynos5420-peach-pit.dtb \
 	exynos5420-smdk5420.dtb \
+	exynos5420-chagall-wifi.dtb \
+	exynos5420-klimt-wifi.dtb \
 	exynos5422-odroidhc1.dtb \
 	exynos5422-odroidxu3.dtb \
 	exynos5422-odroidxu3-lite.dtb \
@@ -250,6 +269,8 @@ dtb-$(CONFIG_ARCH_HISI) += \
 	hi3519-demb.dtb
 dtb-$(CONFIG_ARCH_HIX5HD2) += \
 	hisi-x5hd2-dkb.dtb
+dtb-$(CONFIG_ARCH_HPE_GXP) += \
+	hpe-bmc-dl360gen10.dtb
 dtb-$(CONFIG_ARCH_INTEGRATOR) += \
 	integratorap.dtb \
 	integratorap-im-pd1.dtb \
@@ -269,7 +290,7 @@ dtb-$(CONFIG_ARCH_IXP4XX) += \
 	intel-ixp42x-dlink-dsm-g600.dtb \
 	intel-ixp42x-gateworks-gw2348.dtb \
 	intel-ixp43x-gateworks-gw2358.dtb \
-	intel-ixp42x-netgear-wg302v2.dtb \
+	intel-ixp42x-netgear-wg302v1.dtb \
 	intel-ixp42x-arcom-vulcan.dtb \
 	intel-ixp42x-gateway-7001.dtb
 dtb-$(CONFIG_ARCH_KEYSTONE) += \
@@ -281,6 +302,7 @@ dtb-$(CONFIG_ARCH_KEYSTONE) += \
 dtb-$(CONFIG_MACH_KIRKWOOD) += \
 	kirkwood-b3.dtb \
 	kirkwood-blackarmor-nas220.dtb \
+	kirkwood-c200-v1.dtb \
 	kirkwood-cloudbox.dtb \
 	kirkwood-d2net.dtb \
 	kirkwood-db-88f6281.dtb \
@@ -452,8 +474,10 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-aristainetos_7.dtb \
 	imx6dl-aristainetos2_4.dtb \
 	imx6dl-aristainetos2_7.dtb \
+	imx6dl-colibri-aster.dtb \
 	imx6dl-colibri-eval-v3.dtb \
-	imx6dl-colibri-v1_1-eval-v3.dtb \
+	imx6dl-colibri-iris.dtb \
+	imx6dl-colibri-iris-v2.dtb \
 	imx6dl-cubox-i.dtb \
 	imx6dl-cubox-i-emmc-som-v15.dtb \
 	imx6dl-cubox-i-som-v15.dtb \
@@ -536,11 +560,13 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6q-apalis-eval.dtb \
 	imx6q-apalis-ixora.dtb \
 	imx6q-apalis-ixora-v1.1.dtb \
+	imx6q-apalis-ixora-v1.2.dtb \
 	imx6q-apf6dev.dtb \
 	imx6q-arm2.dtb \
 	imx6q-b450v3.dtb \
 	imx6q-b650v3.dtb \
 	imx6q-b850v3.dtb \
+	imx6q-bosch-acc.dtb \
 	imx6q-cm-fx6.dtb \
 	imx6q-cubox-i.dtb \
 	imx6q-cubox-i-emmc-som-v15.dtb \
@@ -681,9 +707,12 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
 	imx6ul-geam.dtb \
 	imx6ul-isiot-emmc.dtb \
 	imx6ul-isiot-nand.dtb \
-	imx6ul-kontron-n6310-s.dtb \
-	imx6ul-kontron-n6310-s-43.dtb \
+	imx6ul-kontron-bl.dtb \
+	imx6ul-kontron-bl-43.dtb \
 	imx6ul-liteboard.dtb \
+	imx6ul-tqma6ul1-mba6ulx.dtb \
+	imx6ul-tqma6ul2-mba6ulx.dtb \
+	imx6ul-tqma6ul2l-mba6ulx.dtb \
 	imx6ul-opos6uldev.dtb \
 	imx6ul-pico-dwarf.dtb \
 	imx6ul-pico-hobbit.dtb \
@@ -695,23 +724,41 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
 	imx6ul-tx6ul-0011.dtb \
 	imx6ul-tx6ul-mainboard.dtb \
 	imx6ull-14x14-evk.dtb \
+	imx6ull-colibri-aster.dtb \
+	imx6ull-colibri-emmc-aster.dtb \
 	imx6ull-colibri-emmc-eval-v3.dtb \
+	imx6ull-colibri-emmc-iris.dtb \
+	imx6ull-colibri-emmc-iris-v2.dtb \
 	imx6ull-colibri-eval-v3.dtb \
+	imx6ull-colibri-iris.dtb \
+	imx6ull-colibri-iris-v2.dtb \
+	imx6ull-colibri-wifi-aster.dtb \
 	imx6ull-colibri-wifi-eval-v3.dtb \
+	imx6ull-colibri-wifi-iris.dtb \
+	imx6ull-colibri-wifi-iris-v2.dtb \
 	imx6ull-jozacp.dtb \
+	imx6ull-kontron-bl.dtb \
 	imx6ull-myir-mys-6ulx-eval.dtb \
 	imx6ull-opos6uldev.dtb \
 	imx6ull-phytec-segin-ff-rdk-nand.dtb \
 	imx6ull-phytec-segin-ff-rdk-emmc.dtb \
 	imx6ull-phytec-segin-lc-rdk-nand.dtb \
+	imx6ull-phytec-tauri-emmc.dtb \
+	imx6ull-phytec-tauri-nand.dtb \
+	imx6ull-tqma6ull2-mba6ulx.dtb \
+	imx6ull-tqma6ull2l-mba6ulx.dtb \
 	imx6ulz-14x14-evk.dtb \
 	imx6ulz-bsh-smm-m2.dtb
 dtb-$(CONFIG_SOC_IMX7D) += \
 	imx7d-cl-som-imx7.dtb \
 	imx7d-colibri-aster.dtb \
 	imx7d-colibri-emmc-aster.dtb \
+	imx7d-colibri-emmc-iris.dtb \
+	imx7d-colibri-emmc-iris-v2.dtb \
 	imx7d-colibri-emmc-eval-v3.dtb \
 	imx7d-colibri-eval-v3.dtb \
+	imx7d-colibri-iris.dtb \
+	imx7d-colibri-iris-v2.dtb \
 	imx7d-flex-concentrator.dtb \
 	imx7d-flex-concentrator-mfg.dtb \
 	imx7d-mba7.dtb \
@@ -726,16 +773,28 @@ dtb-$(CONFIG_SOC_IMX7D) += \
 	imx7d-sdb.dtb \
 	imx7d-sdb-reva.dtb \
 	imx7d-sdb-sht11.dtb \
+	imx7d-smegw01.dtb \
 	imx7d-zii-rmu2.dtb \
 	imx7d-zii-rpu2.dtb \
 	imx7s-colibri-aster.dtb \
 	imx7s-colibri-eval-v3.dtb \
+	imx7s-colibri-iris.dtb \
+	imx7s-colibri-iris-v2.dtb \
 	imx7s-mba7.dtb \
 	imx7s-warp.dtb
 dtb-$(CONFIG_SOC_IMX7ULP) += \
 	imx7ulp-com.dtb \
 	imx7ulp-evk.dtb
+dtb-$(CONFIG_SOC_IMXRT) += \
+	imxrt1050-evk.dtb
+dtb-$(CONFIG_SOC_LAN966) += \
+	lan966x-kontron-kswitch-d10-mmt-6g-2gs.dtb \
+	lan966x-kontron-kswitch-d10-mmt-8g.dtb \
+	lan966x-pcb8290.dtb \
+	lan966x-pcb8291.dtb \
+	lan966x-pcb8309.dtb
 dtb-$(CONFIG_SOC_LS1021A) += \
+	ls1021a-iot.dtb \
 	ls1021a-moxa-uc-8410a.dtb \
 	ls1021a-qds.dtb \
 	ls1021a-tsn.dtb \
@@ -806,6 +865,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
 	logicpd-som-lv-37xx-devkit.dtb \
 	omap3430-sdp.dtb \
 	omap3-beagle.dtb \
+	omap3-beagle-ab4.dtb \
 	omap3-beagle-xm.dtb \
 	omap3-beagle-xm-ab.dtb \
 	omap3-cm-t3517.dtb \
@@ -894,6 +954,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \
 	am335x-regor-rdk.dtb \
 	am335x-sancloud-bbe.dtb \
 	am335x-sancloud-bbe-lite.dtb \
+	am335x-sancloud-bbe-extended-wifi.dtb \
 	am335x-shc.dtb \
 	am335x-sbc-t335.dtb \
 	am335x-sl50.dtb \
@@ -967,11 +1028,12 @@ dtb-$(CONFIG_ARCH_OXNAS) += \
 	ox820-cloudengines-pogoplug-series-3.dtb
 dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-apq8016-sbc.dtb \
+	qcom-apq8026-asus-sparrow.dtb \
 	qcom-apq8026-lg-lenok.dtb \
 	qcom-apq8060-dragonboard.dtb \
 	qcom-apq8064-cm-qs600.dtb \
 	qcom-apq8064-ifc6410.dtb \
-	qcom-apq8064-sony-xperia-yuga.dtb \
+	qcom-apq8064-sony-xperia-lagan-yuga.dtb \
 	qcom-apq8064-asus-nexus7-flo.dtb \
 	qcom-apq8074-dragonboard.dtb \
 	qcom-apq8084-ifc6540.dtb \
@@ -988,14 +1050,17 @@ dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-ipq8064-rb3011.dtb \
 	qcom-msm8226-samsung-s3ve3g.dtb \
 	qcom-msm8660-surf.dtb \
+	qcom-msm8916-samsung-e5.dtb \
+	qcom-msm8916-samsung-e7.dtb \
+	qcom-msm8916-samsung-grandmax.dtb \
 	qcom-msm8916-samsung-serranove.dtb \
 	qcom-msm8960-cdp.dtb \
-	qcom-msm8974-fairphone-fp2.dtb \
 	qcom-msm8974-lge-nexus5-hammerhead.dtb \
-	qcom-msm8974-samsung-klte.dtb \
-	qcom-msm8974-sony-xperia-amami.dtb \
-	qcom-msm8974-sony-xperia-castor.dtb \
-	qcom-msm8974-sony-xperia-honami.dtb \
+	qcom-msm8974-sony-xperia-rhine-amami.dtb \
+	qcom-msm8974-sony-xperia-rhine-honami.dtb \
+	qcom-msm8974pro-fairphone-fp2.dtb \
+	qcom-msm8974pro-samsung-klte.dtb \
+	qcom-msm8974pro-sony-xperia-shinano-castor.dtb \
 	qcom-mdm9615-wp8548-mangoh-green.dtb \
 	qcom-sdx55-mtp.dtb \
 	qcom-sdx55-t55.dtb \
@@ -1106,7 +1171,7 @@ dtb-$(CONFIG_ARCH_S5PV210) += \
 	s5pv210-torbreck.dtb
 dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += \
 	socfpga_arria5_socdk.dtb \
-	socfpga_arria10_mercury_aa1.dtb \
+	socfpga_arria10_chameleonv3.dtb \
 	socfpga_arria10_socdk_nand.dtb \
 	socfpga_arria10_socdk_qspi.dtb \
 	socfpga_arria10_socdk_sdmmc.dtb \
@@ -1146,10 +1211,15 @@ dtb-$(CONFIG_ARCH_STM32) += \
 	stm32h743i-disco.dtb \
 	stm32h750i-art-pi.dtb \
 	stm32mp135f-dk.dtb \
+	stm32mp151a-prtt1a.dtb \
+	stm32mp151a-prtt1c.dtb \
+	stm32mp151a-prtt1s.dtb \
 	stm32mp153c-dhcom-drc02.dtb \
+	stm32mp153c-dhcor-drc-compact.dtb \
 	stm32mp157a-avenger96.dtb \
 	stm32mp157a-dhcor-avenger96.dtb \
 	stm32mp157a-dk1.dtb \
+	stm32mp157a-dk1-scmi.dtb \
 	stm32mp157a-iot-box.dtb \
 	stm32mp157a-microgea-stm32mp1-microdev2.0.dtb \
 	stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dtb \
@@ -1160,8 +1230,12 @@ dtb-$(CONFIG_ARCH_STM32) += \
 	stm32mp157c-dhcom-pdk2.dtb \
 	stm32mp157c-dhcom-picoitx.dtb \
 	stm32mp157c-dk2.dtb \
+	stm32mp157c-dk2-scmi.dtb \
 	stm32mp157c-ed1.dtb \
+	stm32mp157c-ed1-scmi.dtb \
+	stm32mp157c-emsbc-argon.dtb \
 	stm32mp157c-ev1.dtb \
+	stm32mp157c-ev1-scmi.dtb \
 	stm32mp157c-lxa-mc1.dtb \
 	stm32mp157c-odyssey.dtb
 dtb-$(CONFIG_MACH_SUN4I) += \
@@ -1228,6 +1302,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
 	sun7i-a20-bananapro.dtb \
 	sun7i-a20-cubieboard2.dtb \
 	sun7i-a20-cubietruck.dtb \
+	sun7i-a20-haoyu-marsboard.dtb \
 	sun7i-a20-hummingbird.dtb \
 	sun7i-a20-itead-ibox.dtb \
 	sun7i-a20-i12-tvbox.dtb \
@@ -1370,6 +1445,7 @@ dtb-$(CONFIG_ARCH_U8500) += \
 	ste-ux500-samsung-janice.dtb \
 	ste-ux500-samsung-gavini.dtb \
 	ste-ux500-samsung-codina.dtb \
+	ste-ux500-samsung-codina-tmo.dtb \
 	ste-ux500-samsung-skomer.dtb \
 	ste-ux500-samsung-kyle.dtb
 dtb-$(CONFIG_ARCH_UNIPHIER) += \
@@ -1415,6 +1491,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \
 	zynq-zybo.dtb \
 	zynq-zybo-z7.dtb
 dtb-$(CONFIG_MACH_ARMADA_370) += \
+	armada-370-c200-v2.dtb \
 	armada-370-db.dtb \
 	armada-370-dlink-dns327l.dtb \
 	armada-370-mirabox.dtb \
@@ -1492,6 +1569,9 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
 dtb-$(CONFIG_ARCH_MILBEAUT) += milbeaut-m10v-evb.dtb
 dtb-$(CONFIG_ARCH_MSTARV7) += \
 	mstar-infinity-msc313-breadbee_crust.dtb \
+	mstar-infinity2m-ssd202d-100ask-dongshanpione.dtb \
+	mstar-infinity2m-ssd202d-miyoo-mini.dtb \
+	mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dtb \
 	mstar-infinity2m-ssd202d-ssd201htv2.dtb \
 	mstar-infinity2m-ssd202d-unitv2.dtb \
 	mstar-infinity3-msc313e-breadbee.dtb \
@@ -1500,11 +1580,13 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-ast2500-evb.dtb \
 	aspeed-ast2600-evb-a1.dtb \
 	aspeed-ast2600-evb.dtb \
+	aspeed-bmc-amd-daytonax.dtb \
 	aspeed-bmc-amd-ethanolx.dtb \
 	aspeed-bmc-ampere-mtjade.dtb \
-	aspeed-bmc-arm-centriq2400-rep.dtb \
+	aspeed-bmc-ampere-mtmitchell.dtb \
 	aspeed-bmc-arm-stardragon4800-rep2.dtb \
 	aspeed-bmc-asrock-e3c246d4i.dtb \
+	aspeed-bmc-asrock-romed8hm3.dtb \
 	aspeed-bmc-bytedance-g220a.dtb \
 	aspeed-bmc-facebook-bletchley.dtb \
 	aspeed-bmc-facebook-cloudripper.dtb \
@@ -1541,7 +1623,9 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-opp-witherspoon.dtb \
 	aspeed-bmc-opp-zaius.dtb \
 	aspeed-bmc-portwell-neptune.dtb \
+	aspeed-bmc-qcom-dc-scm-v1.dtb \
 	aspeed-bmc-quanta-q71l.dtb \
+	aspeed-bmc-quanta-s6q.dtb \
 	aspeed-bmc-supermicro-x11spi.dtb \
 	aspeed-bmc-inventec-transformers.dtb \
 	aspeed-bmc-tyan-s7106.dtb \
diff --git a/arch/arm/boot/dts/alpine.dtsi b/arch/arm/boot/dts/alpine.dtsi
index 3b0675a1c460..4be9887033f9 100644
--- a/arch/arm/boot/dts/alpine.dtsi
+++ b/arch/arm/boot/dts/alpine.dtsi
@@ -154,7 +154,7 @@
 			reg = <0x0 0xfbc00000 0x0 0x100000>;
 			interrupt-map-mask = <0xf800 0 0 7>;
 			/* Add legacy interrupts for SATA devices only */
-			interrupt-map =	<0x4000 0 0 1 &gic 0 43 4>,
+			interrupt-map = <0x4000 0 0 1 &gic 0 43 4>,
 					<0x4800 0 0 1 &gic 0 44 4>;
 
 			/* 32 bit non prefetchable memory space */
diff --git a/arch/arm/boot/dts/am335x-baltos-ir2110.dts b/arch/arm/boot/dts/am335x-baltos-ir2110.dts
index daf4cb398070..75992eec830f 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir2110.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir2110.dts
@@ -81,3 +81,147 @@
 	pinctrl-0 = <&mmc1_pins>;
 	cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 };
+
+&gpio0 {
+	gpio-line-names =
+		"MDIO",
+		"MDC",
+		"NC",
+		"NC",
+		"I2C1_SDA",
+		"I2C1_SCL",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"UART1_CTSN",
+		"UART1_RTSN",
+		"UART1_RX",
+		"UART1_TX",
+		"onrisc:blue:wlan",
+		"onrisc:green:app",
+		"USB0_DRVVBUS",
+		"ETH2_INT",
+		"NC",
+		"RMII1_TXD1",
+		"MMC1_DAT0",
+		"MMC1_DAT1",
+		"NC",
+		"NC",
+		"MMC1_DAT2",
+		"MMC1_DAT3",
+		"RMII1_TXD0",
+		"NC",
+		"GPMC_WAIT0",
+		"GPMC_WP_N";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"GPMC_AD0",
+		"GPMC_AD1",
+		"GPMC_AD2",
+		"GPMC_AD3",
+		"GPMC_AD4",
+		"GPMC_AD5",
+		"GPMC_AD6",
+		"GPMC_AD7",
+		"NC",
+		"NC",
+		"CONSOLE_RX",
+		"CONSOLE_TX",
+		"NC",
+		"NC",
+		"NC",
+		"SD_CD",
+		"RGMII2_TCTL",
+		"RGMII2_RCTL",
+		"RGMII2_TD3",
+		"RGMII2_TD2",
+		"RGMII2_TD1",
+		"RGMII2_TD0",
+		"RGMII2_TCLK",
+		"RGMII2_RCLK",
+		"RGMII2_RD3",
+		"RGMII2_RD2",
+		"RGMII2_RD1",
+		"RGMII2_RD0",
+		"PMIC_INT1",
+		"GPMC_CSN0_Flash",
+		"MMC1_CLK",
+		"MMC1_CMD";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"GPMC_CSN3_BUS",
+		"GPMC_CLK",
+		"GPMC_ADVN_ALE",
+		"GPMC_OEN_RE_N",
+		"GPMC_WE_N",
+		"GPMC_BEN0_CLE",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"SW2_0",
+		"SW2_1",
+		"RMII1_RXD1",
+		"RMII1_RXD0",
+		"UART1_DTR",
+		"UART1_DSR",
+		"UART1_DCD",
+		"UART1_RI",
+		"MMC0_DAT3",
+		"MMC0_DAT2",
+		"MMC0_DAT1",
+		"MMC0_DAT0",
+		"MMC0_CLK",
+		"MMC0_CMD";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"onrisc:red:power",
+		"RMII1_CRS_DV",
+		"RMII1_RXER",
+		"RMII1_TXEN",
+		"NC",
+		"NC",
+		"NC",
+		"WLAN_IRQ",
+		"WLAN_EN",
+		"SW2_2",
+		"SW2_3",
+		"NC",
+		"NC",
+		"NC",
+		"ModeA0",
+		"ModeA1",
+		"ModeA2",
+		"ModeA3",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC";
+};
diff --git a/arch/arm/boot/dts/am335x-baltos-ir3220.dts b/arch/arm/boot/dts/am335x-baltos-ir3220.dts
index 2123bd589484..087e084506d2 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir3220.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir3220.dts
@@ -91,6 +91,10 @@
 		interrupts = <20 IRQ_TYPE_EDGE_RISING>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&tca6416_pins>;
+		gpio-line-names = "GP_IN0", "GP_IN1", "GP_IN2", "GP_IN3",
+				  "GP_OUT0", "GP_OUT1", "GP_OUT2", "GP_OUT3",
+				  "ModeA0", "ModeA1", "ModeA2", "ModeA3",
+				  "ModeB0", "ModeB1", "ModeB2", "ModeB3";
 	};
 };
 
@@ -123,3 +127,147 @@
 	pinctrl-0 = <&mmc1_pins>;
 	cd-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
 };
+
+&gpio0 {
+	gpio-line-names =
+		"MDIO",
+		"MDC",
+		"UART2_RX",
+		"UART2_TX",
+		"I2C1_SDA",
+		"I2C1_SCL",
+		"WLAN_BTN",
+		"W_DISABLE",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"UART1_CTSN",
+		"UART1_RTSN",
+		"UART1_RX",
+		"UART1_TX",
+		"onrisc:blue:wlan",
+		"onrisc:green:app",
+		"USB0_DRVVBUS",
+		"ETH2_INT",
+		"TCA6416_INT",
+		"RMII1_TXD1",
+		"MMC1_DAT0",
+		"MMC1_DAT1",
+		"NC",
+		"NC",
+		"MMC1_DAT2",
+		"MMC1_DAT3",
+		"RMII1_TXD0",
+		"NC",
+		"GPMC_WAIT0",
+		"GPMC_WP_N";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"GPMC_AD0",
+		"GPMC_AD1",
+		"GPMC_AD2",
+		"GPMC_AD3",
+		"GPMC_AD4",
+		"GPMC_AD5",
+		"GPMC_AD6",
+		"GPMC_AD7",
+		"NC",
+		"NC",
+		"CONSOLE_RX",
+		"CONSOLE_TX",
+		"UART2_DTR",
+		"UART2_DSR",
+		"UART2_DCD",
+		"UART2_RI",
+		"RGMII2_TCTL",
+		"RGMII2_RCTL",
+		"RGMII2_TD3",
+		"RGMII2_TD2",
+		"RGMII2_TD1",
+		"RGMII2_TD0",
+		"RGMII2_TCLK",
+		"RGMII2_RCLK",
+		"RGMII2_RD3",
+		"RGMII2_RD2",
+		"RGMII2_RD1",
+		"RGMII2_RD0",
+		"PMIC_INT1",
+		"GPMC_CSN0_Flash",
+		"MMC1_CLK",
+		"MMC1_CMD";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"GPMC_CSN3_BUS",
+		"GPMC_CLK",
+		"GPMC_ADVN_ALE",
+		"GPMC_OEN_RE_N",
+		"GPMC_WE_N",
+		"GPMC_BEN0_CLE",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"SD_CD",
+		"SD_WP",
+		"RMII1_RXD1",
+		"RMII1_RXD0",
+		"UART1_DTR",
+		"UART1_DSR",
+		"UART1_DCD",
+		"UART1_RI",
+		"MMC0_DAT3",
+		"MMC0_DAT2",
+		"MMC0_DAT1",
+		"MMC0_DAT0",
+		"MMC0_CLK",
+		"MMC0_CMD";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"onrisc:red:power",
+		"RMII1_CRS_DV",
+		"RMII1_RXER",
+		"RMII1_TXEN",
+		"3G_PWR_EN",
+		"UART2_CTSN",
+		"UART2_RTSN",
+		"WLAN_IRQ",
+		"WLAN_EN",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"USB1_DRVVBUS",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC";
+};
diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
index 2f3872dbf4f4..faeb39aab60a 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
@@ -99,6 +99,10 @@
 		interrupts = <20 IRQ_TYPE_EDGE_RISING>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&tca6416_pins>;
+		gpio-line-names = "GP_IN0", "GP_IN1", "GP_IN2", "GP_IN3",
+				  "GP_OUT0", "GP_OUT1", "GP_OUT2", "GP_OUT3",
+				  "ModeA0", "ModeA1", "ModeA2", "ModeA3",
+				  "ModeB0", "ModeB1", "ModeB2", "ModeB3";
 	};
 };
 
@@ -147,3 +151,147 @@
 	pinctrl-0 = <&mmc1_pins>;
 	cd-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
 };
+
+&gpio0 {
+	gpio-line-names =
+		"MDIO",
+		"MDC",
+		"UART2_RX",
+		"UART2_TX",
+		"I2C1_SDA",
+		"I2C1_SCL",
+		"WLAN_BTN",
+		"W_DISABLE",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"UART1_CTSN",
+		"UART1_RTSN",
+		"UART1_RX",
+		"UART1_TX",
+		"onrisc:blue:wlan",
+		"onrisc:green:app",
+		"USB0_DRVVBUS",
+		"ETH2_INT",
+		"TCA6416_INT",
+		"RMII1_TXD1",
+		"MMC1_DAT0",
+		"MMC1_DAT1",
+		"NC",
+		"NC",
+		"MMC1_DAT2",
+		"MMC1_DAT3",
+		"RMII1_TXD0",
+		"NC",
+		"GPMC_WAIT0",
+		"GPMC_WP_N";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"GPMC_AD0",
+		"GPMC_AD1",
+		"GPMC_AD2",
+		"GPMC_AD3",
+		"GPMC_AD4",
+		"GPMC_AD5",
+		"GPMC_AD6",
+		"GPMC_AD7",
+		"DCAN1_TX",
+		"DCAN1_RX",
+		"CONSOLE_RX",
+		"CONSOLE_TX",
+		"UART2_DTR",
+		"UART2_DSR",
+		"UART2_DCD",
+		"UART2_RI",
+		"RGMII2_TCTL",
+		"RGMII2_RCTL",
+		"RGMII2_TD3",
+		"RGMII2_TD2",
+		"RGMII2_TD1",
+		"RGMII2_TD0",
+		"RGMII2_TCLK",
+		"RGMII2_RCLK",
+		"RGMII2_RD3",
+		"RGMII2_RD2",
+		"RGMII2_RD1",
+		"RGMII2_RD0",
+		"PMIC_INT1",
+		"GPMC_CSN0_Flash",
+		"MMC1_CLK",
+		"MMC1_CMD";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"GPMC_CSN3_BUS",
+		"GPMC_CLK",
+		"GPMC_ADVN_ALE",
+		"GPMC_OEN_RE_N",
+		"GPMC_WE_N",
+		"GPMC_BEN0_CLE",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"SD_CD",
+		"SD_WP",
+		"RMII1_RXD1",
+		"RMII1_RXD0",
+		"UART1_DTR",
+		"UART1_DSR",
+		"UART1_DCD",
+		"UART1_RI",
+		"MMC0_DAT3",
+		"MMC0_DAT2",
+		"MMC0_DAT1",
+		"MMC0_DAT0",
+		"MMC0_CLK",
+		"MMC0_CMD";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"onrisc:red:power",
+		"RMII1_CRS_DV",
+		"RMII1_RXER",
+		"RMII1_TXEN",
+		"3G_PWR_EN",
+		"UART2_CTSN",
+		"UART2_RTSN",
+		"WLAN_IRQ",
+		"WLAN_EN",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"USB1_DRVVBUS",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC";
+};
diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi
index 366702630290..6161c8929a78 100644
--- a/arch/arm/boot/dts/am335x-baltos.dtsi
+++ b/arch/arm/boot/dts/am335x-baltos.dtsi
@@ -197,7 +197,7 @@
 		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		nand-bus-width = <8>;
 		ti,nand-ecc-opt = "bch8";
-		ti,nand-xfer-type = "polled";
+		ti,nand-xfer-type = "prefetch-dma";
 
 		gpmc,device-nand = "true";
 		gpmc,device-width = <1>;
@@ -285,7 +285,7 @@
 			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1312500>;
+			regulator-max-microvolt = <1351500>;
 			regulator-boot-on;
 			regulator-always-on;
 		};
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index 56ae5095a5b8..02e04a12a270 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -405,3 +405,7 @@
 &pruss_tm {
 	status = "okay";
 };
+
+&wkup_m3_ipc {
+	firmware-name = "am335x-bone-scale-data.bin";
+};
diff --git a/arch/arm/boot/dts/am335x-boneblack-wireless.dts b/arch/arm/boot/dts/am335x-boneblack-wireless.dts
index c72b09ab8da0..207d2b63e0eb 100644
--- a/arch/arm/boot/dts/am335x-boneblack-wireless.dts
+++ b/arch/arm/boot/dts/am335x-boneblack-wireless.dts
@@ -19,7 +19,7 @@
 		regulator-name = "wlan-en-regulator";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
-		startup-delay-us= <70000>;
+		startup-delay-us = <70000>;
 
 		/* WL_EN */
 		gpio = <&gpio3 9 0>;
diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts
index 9312197316f0..b956e2f60fe0 100644
--- a/arch/arm/boot/dts/am335x-boneblack.dts
+++ b/arch/arm/boot/dts/am335x-boneblack.dts
@@ -168,3 +168,7 @@
 		"NC",
 		"NC";
 };
+
+&baseboard_eeprom {
+	vcc-supply = <&ldo4_reg>;
+};
diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts
index 147c00de3795..34579e98636e 100644
--- a/arch/arm/boot/dts/am335x-boneblue.dts
+++ b/arch/arm/boot/dts/am335x-boneblue.dts
@@ -106,7 +106,7 @@
 		regulator-name = "wlan-en-regulator";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
-		startup-delay-us= <70000>;
+		startup-delay-us = <70000>;
 
 		/* WL_EN */
 		gpio = <&gpio3 9 0>;
diff --git a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
index 215f279e476b..d388cffa1a4d 100644
--- a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
+++ b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
@@ -18,7 +18,7 @@
 		regulator-name = "wlan-en-regulator";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
-		startup-delay-us= <70000>;
+		startup-delay-us = <70000>;
 
 		/* WL_EN */
 		gpio = <&gpio0 26 0>;
diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts
index d9f003d886bf..993b13420699 100644
--- a/arch/arm/boot/dts/am335x-cm-t335.dts
+++ b/arch/arm/boot/dts/am335x-cm-t335.dts
@@ -325,7 +325,7 @@ status = "okay";
 	tlv320aic23: codec@1a {
 		compatible = "ti,tlv320aic23";
 		reg = <0x1a>;
-		#sound-dai-cells= <0>;
+		#sound-dai-cells = <0>;
 		status = "okay";
 	};
 };
@@ -491,7 +491,7 @@ status = "okay";
 		tx-num-evt = <1>;
 		rx-num-evt = <1>;
 
-		#sound-dai-cells= <0>;
+		#sound-dai-cells = <0>;
 		status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 659e99eabe66..25c6ac9913d2 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -92,20 +92,18 @@
 				0x0201006c>;	/* DOWN */
 	};
 
-	gpio_keys: volume_keys0 {
+	gpio_keys: volume-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
 
-		switch9 {
+		switch-9 {
 			label = "volume-up";
 			linux,code = <115>;
 			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
 			wakeup-source;
 		};
 
-		switch10 {
+		switch-10 {
 			label = "volume-down";
 			linux,code = <114>;
 			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
@@ -782,3 +780,7 @@
 &pruss_tm {
 	status = "okay";
 };
+
+&wkup_m3_ipc {
+	firmware-name = "am335x-evm-scale-data.bin";
+};
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index a2db65538e51..9c458e5a95b7 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -719,3 +719,7 @@
 &pruss_tm {
 	status = "okay";
 };
+
+&wkup_m3_ipc {
+	firmware-name = "am335x-evm-scale-data.bin";
+};
diff --git a/arch/arm/boot/dts/am335x-guardian.dts b/arch/arm/boot/dts/am335x-guardian.dts
index 1918766c1f80..f6356266564c 100644
--- a/arch/arm/boot/dts/am335x-guardian.dts
+++ b/arch/arm/boot/dts/am335x-guardian.dts
@@ -29,39 +29,42 @@
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
+	guardian_buttons: gpio-keys {
 		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys_pins>;
+		pinctrl-0 = <&guardian_button_pins>;
+		compatible = "gpio-keys";
+
+		select-button {
+			label = "guardian-select-button";
+			linux,code = <KEY_5>;
+			gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
 
-		button21 {
+		power-button {
 			label = "guardian-power-button";
 			linux,code = <KEY_POWER>;
-			gpios = <&gpio2 21 0>;
+			gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
 			wakeup-source;
 		};
 	};
 
-	leds {
-		compatible = "gpio-leds";
+	guardian_leds: gpio-leds {
 		pinctrl-names = "default";
-		pinctrl-0 = <&leds_pins>;
+		pinctrl-0 = <&guardian_led_pins>;
+		compatible = "gpio-leds";
 
-		led1 {
-			label = "green:heartbeat";
-			gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+		life-led {
+			label = "guardian:life-led";
+			gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
+	};
 
-		led2 {
-			label = "green:mmc0";
-			gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-			default-state = "off";
-		};
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
 	};
 
 	panel {
@@ -100,20 +103,36 @@
 
 	};
 
-	pwm7: dmtimer-pwm {
+	guardian_beeper: dmtimer-pwm@7 {
 		compatible = "ti,omap-dmtimer-pwm";
 		ti,timers = <&timer7>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&dmtimer7_pins>;
+		pinctrl-0 = <&guardian_beeper_pins>;
 		ti,clock-source = <0x01>;
 	};
 
-	vmmcsd_fixed: regulator-3v3 {
+	vmmcsd_fixed: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
+
+	mt_keypad: mt_keypad@0 {
+		compatible = "gpio-mt-keypad";
+		debounce-delay-ms = <10>;
+		col-scan-delay-us = <2>;
+		keypad,num-lines = <5>;
+		linux,no-autorepeat;
+		gpio-activelow;
+		line-gpios = <
+			&gpio1 24 GPIO_ACTIVE_LOW    /*gpio_56*/
+			&gpio1 23 GPIO_ACTIVE_LOW    /*gpio_55*/
+			&gpio1 22 GPIO_ACTIVE_LOW    /*gpio_54*/
+			&gpio1 20 GPIO_ACTIVE_LOW    /*gpio_52*/
+			&gpio1 16 GPIO_ACTIVE_LOW    /*gpio_48*/
+		>;
+	};
 };
 
 &elm {
@@ -133,28 +152,29 @@
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>; /* termcount */
 		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+		ti,nand-xfer-type = "prefetch-dma";
 		ti,nand-ecc-opt = "bch16";
 		ti,elm-id = <&elm>;
 		nand-bus-width = <8>;
 		gpmc,device-width = <1>;
 		gpmc,sync-clk-ps = <0>;
 		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
+		gpmc,cs-rd-off-ns = <30>;
+		gpmc,cs-wr-off-ns = <30>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <30>;
+		gpmc,adv-wr-off-ns = <30>;
 		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-on-ns = <0>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
+		gpmc,we-off-ns = <15>;
+		gpmc,oe-on-ns = <1>;
+		gpmc,oe-off-ns = <15>;
+		gpmc,access-ns = <30>;
+		gpmc,rd-cycle-ns = <30>;
+		gpmc,wr-cycle-ns = <30>;
 		gpmc,bus-turnaround-ns = <0>;
 		gpmc,cycle2cycle-delay-ns = <0>;
 		gpmc,clk-activation-ns = <0>;
-		gpmc,wr-access-ns = <40>;
+		gpmc,wr-access-ns = <0>;
 		gpmc,wr-data-mux-bus-ns = <0>;
 
 		/*
@@ -198,18 +218,33 @@
 		};
 
 		partition@6 {
-			label = "u-boot-env";
-			reg = <0x300000 0x40000>;
+			label = "u-boot-2";
+			reg = <0x300000 0x100000>;
 		};
 
 		partition@7 {
-			label = "u-boot-env.backup1";
-			reg = <0x340000 0x40000>;
+			label = "u-boot-2.backup1";
+			reg = <0x400000 0x100000>;
 		};
 
 		partition@8 {
+			label = "u-boot-env";
+			reg = <0x500000 0x40000>;
+		};
+
+		partition@9 {
+			label = "u-boot-env.backup1";
+			reg = <0x540000 0x40000>;
+		};
+
+		partition@10 {
+			label = "splash-screen";
+			reg = <0x580000 0x40000>;
+		};
+
+		partition@11 {
 			label = "UBI";
-			reg = <0x380000 0x1fc80000>;
+			reg = <0x5c0000 0x1fa40000>;
 		};
 	};
 };
@@ -228,6 +263,11 @@
 &lcdc {
 	blue-and-red-wiring = "crossed";
 	status = "okay";
+	port {
+		lcdc_0: endpoint@0 {
+			remote-endpoint = <0>;
+		};
+	};
 };
 
 &mmc1 {
@@ -242,7 +282,6 @@
 &rtc {
 	clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
 	clock-names = "ext-clk", "int-clk";
-	system-power-controller;
 };
 
 &spi0 {
@@ -255,14 +294,34 @@
 #include "tps65217.dtsi"
 
 &tps {
+  /*
+   * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
+   * mode") at poweroff.  Most BeagleBone versions do not support RTC-only
+   * mode and risk hardware damage if this mode is entered.
+   *
+   * For details, see linux-omap mailing list May 2015 thread
+   *  [PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller
+   * In particular, messages:
+   *  http://www.spinics.net/lists/linux-omap/msg118585.html
+   *  http://www.spinics.net/lists/linux-omap/msg118615.html
+   *
+   * You can override this later with
+   *  &tps {  /delete-property/ ti,pmic-shutdown-controller;  }
+   * if you want to use RTC-only mode and made sure you are not affected
+   * by the hardware problems. (Tip: double-check by performing a current
+   * measurement after shutdown: it should be less than 1 mA.)
+   */
 	ti,pmic-shutdown-controller;
 	interrupt-parent = <&intc>;
 	interrupts = <7>; /* NMI */
 
 	backlight {
 		isel = <1>;  /* 1 - ISET1, 2 ISET2 */
-		fdim = <100>; /* TPS65217_BL_FDIM_100HZ */
-		default-brightness = <100>;
+		fdim = <500>; /* TPS65217_BL_FDIM_500HZ */
+		default-brightness = <50>;
+		/* 1(on) - enable current sink, while initialization */
+		/* 0(off) - disable current sink, while initialization */
+		isink-en = <1>;
 	};
 
 	regulators {
@@ -272,6 +331,7 @@
 		};
 
 		dcdc2_reg: regulator@1 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <925000>;
 			regulator-max-microvolt = <1351500>;
@@ -280,6 +340,7 @@
 		};
 
 		dcdc3_reg: regulator@2 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
 			regulator-name = "vdd_core";
 			regulator-min-microvolt = <925000>;
 			regulator-max-microvolt = <1150000>;
@@ -319,171 +380,364 @@
 	};
 };
 
+&gpio0 {
+	gpio-line-names =
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"MirxWakeup",
+		"",
+		"";
+};
+
+&gpio3 {
+	ti,gpio-always-on;
+	ti,no-reset-on-init;
+	gpio-line-names =
+		"",
+		"MirxBtReset",
+		"",
+		"CcVolAdcEn",
+		"MirxBlePause",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"AspEn",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"BatVolAdcEn",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins>;
 	status = "okay";
 };
 
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
 &usb0 {
 	dr_mode = "peripheral";
 };
 
 &usb1 {
 	dr_mode = "host";
+	/delete-property/dmas;
+	/delete-property/dma-names;
 };
 
 &am33xx_pinmux {
 	pinctrl-names = "default";
-	pinctrl-0 = <&clkout2_pin &gpio_pins>;
+	pinctrl-0 = <&clkout2_pin &guardian_interface_pins>;
 
 	clkout2_pin: pinmux_clkout2_pin {
 		pinctrl-single,pins = <
+			/* xdma_event_intr1.clkout2 */
 			AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
 		>;
 	};
 
-	dmtimer7_pins: pinmux_dmtimer7_pins {
+	guardian_interface_pins: pinmux_interface_pins {
 		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE5)
+			/* ADC_BATSENSE_EN */
+			/* (A14) MCASP0_AHCLKx.gpio3[21] */
+			AM33XX_IOPAD(0x9ac, PIN_OUTPUT_PULLDOWN | MUX_MODE7 )
+			/* ADC_COINCELL_EN */
+			/* (J16) MII1_TX_EN.gpio3[3] */
+			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE7 )
+			/* ASP_ENABLE */
+			/* (A13) MCASP0_ACLKx.gpio3[14] */
+			AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLUP | MUX_MODE7)
+			/* (D16) uart1_rxd.uart1_rxd */
+			AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE7)
+			/* (D15) uart1_txd.uart1_txd */
+			AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE7)
+			/*SWITCH-OFF_3V6*/
+			/* (M18) gpio0[1] */
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE7)
+			/* MIRACULIX */
+			/* (H17) gmii1_crs.gpio3[1] */
+			AM33XX_IOPAD(0x90c, PIN_OUTPUT_PULLDOWN | MUX_MODE7 )
+			/* (H18) rmii1_refclk.gpio0[29] */
+			AM33XX_IOPAD(0x944, PIN_OUTPUT_PULLDOWN | MUX_MODE7 )
+			/* (J18) gmii1_txd3.gpio0[16] */
+			AM33XX_IOPAD(0x91c, PIN_INPUT           | MUX_MODE7 )
+			/* (J17) gmii1_rxdv.gpio3[4] */
+			AM33XX_IOPAD(0x918, PIN_OUTPUT_PULLDOWN | MUX_MODE7 )
 		>;
 	};
 
-	gpio_keys_pins: pinmux_gpio_keys_pins {
+	guardian_beeper_pins: pinmux_dmtimer7_pins {
 		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x940, PIN_INPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE5) /* (E18) timer7 */
 		>;
 	};
 
-	gpio_pins: pinmux_gpio_pins {
+	guardian_button_pins: pinmux_guardian_button_pins {
 		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x928, PIN_OUTPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x990, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x940, PIN_INPUT | MUX_MODE7) /* (M16) gmii1_rxd0.gpio2[21] */
+			AM33XX_IOPAD(0x884, PIN_INPUT | MUX_MODE7) /* (V9)  gpmc_csn2.gpio1[31] */
 		>;
 	};
 
+
 	i2c0_pins: pinmux_i2c0_pins {
 		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)
-			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	led_bl_pins: gpio_led_bl_pins {
+		pinctrl-single,pins = <
+			/* P9_14, gpmc_a[2].GPIO1[18] (backlight control) */
+			AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE7)
 		>;
 	};
 
 	lcd_disen_pins: pinmux_lcd_disen_pins {
 		pinctrl-single,pins = <
+			/* P9_27, mcasp0_fsr.gpio3[19] (lcd_disen) */
 			AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLUP | SLEWCTRL_SLOW | MUX_MODE7)
 		>;
 	};
 
 	lcd_pins_default: pinmux_lcd_pins_default {
 		pinctrl-single,pins = <
+			/* (U10) gpmc_ad8.lcd_data23 */
 			AM33XX_IOPAD(0x820, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			/* (T10) gpmc_ad9.lcd_data22 */
 			AM33XX_IOPAD(0x824, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			/* (T11) gpmc_ad10.lcd_data21 */
 			AM33XX_IOPAD(0x828, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			/* (U12) gpmc_ad11.lcd_data20 */
 			AM33XX_IOPAD(0x82c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			/* (T12) gpmc_ad12.lcd_data19 */
 			AM33XX_IOPAD(0x830, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			/* (R12) gpmc_ad13.lcd_data18 */
 			AM33XX_IOPAD(0x834, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			/* (V13) gpmc_ad14.lcd_data17 */
 			AM33XX_IOPAD(0x838, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			/* (U13) gpmc_ad15.lcd_data16 */
 			AM33XX_IOPAD(0x83c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			/* lcd_data0.lcd_data0 */
 			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data1.lcd_data1 */
 			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data2.lcd_data2 */
 			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data3.lcd_data3 */
 			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data4.lcd_data4 */
 			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data5.lcd_data5 */
 			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data6.lcd_data6 */
 			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data7.lcd_data7 */
 			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data8.lcd_data8 */
 			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data9.lcd_data9 */
 			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data10.lcd_data10 */
 			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data11.lcd_data11 */
 			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data12.lcd_data12 */
 			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data13.lcd_data13 */
 			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data14.lcd_data14 */
 			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data15.lcd_data15 */
 			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_vsync.lcd_vsync */
 			AM33XX_IOPAD(0x8e0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_hsync.lcd_hsync */
 			AM33XX_IOPAD(0x8e4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_pclk.lcd_pclk */
 			AM33XX_IOPAD(0x8e8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_ac_bias_en.lcd_ac_bias_en */
 			AM33XX_IOPAD(0x8ec, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
 		>;
 	};
 
 	lcd_pins_sleep: pinmux_lcd_pins_sleep {
 		pinctrl-single,pins = <
+			/* lcd_data0.lcd_data0 */
 			AM33XX_IOPAD(0x8a0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data1.lcd_data1 */
 			AM33XX_IOPAD(0x8a4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data2.lcd_data2 */
 			AM33XX_IOPAD(0x8a8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data3.lcd_data3 */
 			AM33XX_IOPAD(0x8ac, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data4.lcd_data4 */
 			AM33XX_IOPAD(0x8b0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data5.lcd_data5 */
 			AM33XX_IOPAD(0x8b4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data6.lcd_data6 */
 			AM33XX_IOPAD(0x8b8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data7.lcd_data7 */
 			AM33XX_IOPAD(0x8bc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data8.lcd_data8 */
 			AM33XX_IOPAD(0x8c0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data9.lcd_data9 */
 			AM33XX_IOPAD(0x8c4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data10.lcd_data10 */
 			AM33XX_IOPAD(0x8c8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data11.lcd_data11 */
 			AM33XX_IOPAD(0x8cc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data12.lcd_data12 */
 			AM33XX_IOPAD(0x8d0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data13.lcd_data13 */
 			AM33XX_IOPAD(0x8d4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data14.lcd_data14 */
 			AM33XX_IOPAD(0x8d8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data15.lcd_data15 */
 			AM33XX_IOPAD(0x8dc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_vsync.lcd_vsync */
 			AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_hsync.lcd_hsync */
 			AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_pclk.lcd_pclk */
 			AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_ac_bias_en.lcd_ac_bias_en */
 			AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
 		>;
 	};
 
-	leds_pins: pinmux_leds_pins {
+	guardian_led_pins: pinmux_guardian_led_pins {
 		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x868, PIN_OUTPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x86c, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x868, PIN_OUTPUT | MUX_MODE7) /* (T16) gpmc_a10.gpio1[26] */
 		>;
 	};
 
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)
-			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)
-			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)
-			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)
-			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)
-			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)
-			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc0_dat3.mmc0_dat3 */
+			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc0_dat2.mmc0_dat2 */
+			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc0_dat1.mmc0_dat1 */
+			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc0_dat0.mmc0_dat0 */
+			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc0_clk.mmc0_clk */
+			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc0_cmd.mmc0_cmd */
+			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7)         /* GPIO0_6 */
 		>;
 	};
 
 	spi0_pins: pinmux_spi0_pins {
 		pinctrl-single,pins = <
+			/* SPI0_CLK  - spi0_clk.spi */
 			AM33XX_IOPAD(0x950, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+			/* SPI0_MOSI - spi0_d0.spi0 */
 			AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			/* SPI0_MISO - spi0_d1.spi0 */
 			AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* SPI0_CS0 - spi */
 			AM33XX_IOPAD(0x95c, PIN_OUTPUT_PULLUP | MUX_MODE0)
 		>;
 	};
 
 	uart0_pins: pinmux_uart0_pins {
 		pinctrl-single,pins = <
+			/* uart0_rxd.uart0_rxd */
 			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* uart0_txd.uart0_txd */
 			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
 		>;
 	};
 
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			/* K18 uart2_rxd.mirx_txd */
+			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE1)
+			/* L18 uart2_txd.mirx_rxd */
+			AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLDOWN | MUX_MODE1)
+		>;
+	};
+
 	nandflash_pins: pinmux_nandflash_pins {
 		pinctrl-single,pins = <
+			/* (U7) gpmc_ad0.gpmc_ad0 */
 			AM33XX_IOPAD(0x800, PIN_INPUT | MUX_MODE0)
+			/* (V7) gpmc_ad1.gpmc_ad1 */
 			AM33XX_IOPAD(0x804, PIN_INPUT | MUX_MODE0)
+			/* (R8) gpmc_ad2.gpmc_ad2 */
 			AM33XX_IOPAD(0x808, PIN_INPUT | MUX_MODE0)
+			/* (T8) gpmc_ad3.gpmc_ad3 */
 			AM33XX_IOPAD(0x80c, PIN_INPUT | MUX_MODE0)
+			/* (U8) gpmc_ad4.gpmc_ad4 */
 			AM33XX_IOPAD(0x810, PIN_INPUT | MUX_MODE0)
+			/* (V8) gpmc_ad5.gpmc_ad5 */
 			AM33XX_IOPAD(0x814, PIN_INPUT | MUX_MODE0)
+			/* (R9) gpmc_ad6.gpmc_ad6 */
 			AM33XX_IOPAD(0x818, PIN_INPUT | MUX_MODE0)
+			/* (T9) gpmc_ad7.gpmc_ad7 */
 			AM33XX_IOPAD(0x81c, PIN_INPUT | MUX_MODE0)
+			/* (T17) gpmc_wait0.gpmc_wait0 */
 			AM33XX_IOPAD(0x870, PIN_INPUT | MUX_MODE0)
+			/* (U17) gpmc_wpn.gpmc_wpn */
 			AM33XX_IOPAD(0x874, PIN_OUTPUT | MUX_MODE0)
+			/* (V6) gpmc_csn0.gpmc_csn0 */
 			AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)
+			/* (R7) gpmc_advn_ale.gpmc_advn_ale */
 			AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)
+			/* (T7) gpmc_oen_ren.gpmc_oen_ren */
 			AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)
+			/* (U6) gpmc_wen.gpmc_wen */
 			AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)
+			/* (T6) gpmc_be0n_cle.gpmc_be0n_cle */
 			AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)
 		>;
 	};
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
index 11e8f64b6606..7b40ca9483ca 100644
--- a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
+++ b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
@@ -166,10 +166,8 @@
 &buttons {
 	pinctrl-names = "default";
 	pinctrl-0 = <&push_button_pins>;
-	#address-cells = <1>;
-	#size-cells = <0>;
 
-	button@0 {
+	button-0 {
 		label = "push_button";
 		linux,code = <0x100>;
 		gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
@@ -182,7 +180,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi0_pins>;
 
-	m25p80@0 {
+	flash@0 {
 		compatible = "mx25l6405d";
 		spi-max-frequency = <40000000>;
 
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
index a7269b90d795..e0364adb8393 100644
--- a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
+++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
@@ -378,10 +378,8 @@
 &buttons {
 	pinctrl-names = "default";
 	pinctrl-0 = <&push_button_pins>;
-	#address-cells = <1>;
-	#size-cells = <0>;
 
-	button@0 {
+	button-0 {
 		label = "push_button";
 		linux,code = <0x100>;
 		gpios = <&gpio3 21 GPIO_ACTIVE_LOW>;
@@ -394,7 +392,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi0_pins>;
 
-	m25p80@0 {
+	flash@0 {
 		compatible = "mx25l6405d";
 		spi-max-frequency = <40000000>;
 
diff --git a/arch/arm/boot/dts/am335x-myirtech-myc.dtsi b/arch/arm/boot/dts/am335x-myirtech-myc.dtsi
index 245c35f41cdf..6eea18b29355 100644
--- a/arch/arm/boot/dts/am335x-myirtech-myc.dtsi
+++ b/arch/arm/boot/dts/am335x-myirtech-myc.dtsi
@@ -27,6 +27,13 @@
 		reg = <0x80000000 0x10000000>;
 	};
 
+	clk32k: clk32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+
+		#clock-cells = <0>;
+	};
+
 	vdd_mod: vdd_mod_reg {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd-mod";
@@ -124,9 +131,6 @@
 		gpmc,wr-data-mux-bus-ns = <0>;
 		ti,elm-id = <&elm>;
 		ti,nand-ecc-opt = "bch8";
-
-		#address-cells = <1>;
-		#size-cells = <1>;
 	};
 };
 
@@ -149,6 +153,8 @@
 };
 
 &rtc {
+	clocks = <&clk32k>;
+	clock-names = "ext-clk";
 	system-power-controller;
 };
 
diff --git a/arch/arm/boot/dts/am335x-myirtech-myd.dts b/arch/arm/boot/dts/am335x-myirtech-myd.dts
index 1479fd95dec2..9d81d4cc6890 100644
--- a/arch/arm/boot/dts/am335x-myirtech-myd.dts
+++ b/arch/arm/boot/dts/am335x-myirtech-myd.dts
@@ -227,14 +227,20 @@
 };
 
 &nand0 {
-	partition@0 {
-		label = "MLO";
-		reg = <0x00000 0x20000>;
-	};
+	nand_parts: partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
 
-	partition@20000 {
-		label = "boot";
-		reg = <0x20000 0x80000>;
+		partition@0 {
+			label = "MLO";
+			reg = <0x00000 0x20000>;
+		};
+
+		partition@80000 {
+			label = "boot";
+			reg = <0x80000 0x100000>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts b/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts
index 57e756b0f192..2e049489ac06 100644
--- a/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts
+++ b/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts
@@ -85,3 +85,147 @@
 
 	status = "okay";
 };
+
+&gpio0 {
+	gpio-line-names =
+		"MDIO",
+		"MDC",
+		"NC",
+		"NC",
+		"I2C1_SDA",
+		"I2C1_SCL",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"can_data",
+		"can_error",
+		"onrisc:blue:wlan",
+		"onrisc:green:app",
+		"USB0_DRVVBUS",
+		"ETH2_INT",
+		"NC",
+		"NC",
+		"MMC1_DAT0",
+		"MMC1_DAT1",
+		"NC",
+		"NC",
+		"MMC1_DAT2",
+		"MMC1_DAT3",
+		"NC",
+		"NC",
+		"GPMC_WAIT0",
+		"GPMC_WP_N";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"GPMC_AD0",
+		"GPMC_AD1",
+		"GPMC_AD2",
+		"GPMC_AD3",
+		"GPMC_AD4",
+		"GPMC_AD5",
+		"GPMC_AD6",
+		"GPMC_AD7",
+		"DCAN1_TX",
+		"DCAN1_RX",
+		"CONSOLE_RX",
+		"CONSOLE_TX",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"RGMII2_TCTL",
+		"RGMII2_RCTL",
+		"RGMII2_TD3",
+		"RGMII2_TD2",
+		"RGMII2_TD1",
+		"RGMII2_TD0",
+		"RGMII2_TCLK",
+		"RGMII2_RCLK",
+		"RGMII2_RD3",
+		"RGMII2_RD2",
+		"RGMII2_RD1",
+		"RGMII2_RD0",
+		"PMIC_INT1",
+		"GPMC_CSN0_Flash",
+		"MMC1_CLK",
+		"MMC1_CMD";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"GPMC_CSN3_BUS",
+		"GPMC_CLK",
+		"GPMC_ADVN_ALE",
+		"GPMC_OEN_RE_N",
+		"GPMC_WE_N",
+		"GPMC_BEN0_CLE",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"SW2_0",
+		"SW2_1",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"MMC0_DAT3",
+		"MMC0_DAT2",
+		"MMC0_DAT1",
+		"MMC0_DAT0",
+		"MMC0_CLK",
+		"MMC0_CMD";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"onrisc:red:power",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"WLAN_IRQ",
+		"WLAN_EN",
+		"SW2_2",
+		"SW2_3",
+		"NC",
+		"NC",
+		"NC",
+		"ModeA0",
+		"ModeA1",
+		"ModeA2",
+		"ModeA3",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC";
+};
diff --git a/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts
index c6cc1c6218a9..6ed886c3306b 100644
--- a/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts
+++ b/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts
@@ -93,3 +93,147 @@
 	ti,dual-emac-pvid = <2>;
 	phy-handle = <&phy1>;
 };
+
+&gpio0 {
+	gpio-line-names =
+		"MDIO",
+		"MDC",
+		"UART2_RX",
+		"UART2_TX",
+		"I2C1_SDA",
+		"I2C1_SCL",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"UART1_CTSN",
+		"UART1_RTSN",
+		"UART1_RX",
+		"UART1_TX",
+		"onrisc:blue:wlan",
+		"onrisc:green:app",
+		"USB0_DRVVBUS",
+		"ETH2_INT",
+		"NC",
+		"NC",
+		"MMC1_DAT0",
+		"MMC1_DAT1",
+		"NC",
+		"NC",
+		"MMC1_DAT2",
+		"MMC1_DAT3",
+		"NC",
+		"NC",
+		"GPMC_WAIT0",
+		"GPMC_WP_N";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"GPMC_AD0",
+		"GPMC_AD1",
+		"GPMC_AD2",
+		"GPMC_AD3",
+		"GPMC_AD4",
+		"GPMC_AD5",
+		"GPMC_AD6",
+		"GPMC_AD7",
+		"NC",
+		"NC",
+		"CONSOLE_RX",
+		"CONSOLE_TX",
+		"UART2_DTR",
+		"UART2_DSR",
+		"UART2_DCD",
+		"UART2_RI",
+		"RGMII2_TCTL",
+		"RGMII2_RCTL",
+		"RGMII2_TD3",
+		"RGMII2_TD2",
+		"RGMII2_TD1",
+		"RGMII2_TD0",
+		"RGMII2_TCLK",
+		"RGMII2_RCLK",
+		"RGMII2_RD3",
+		"RGMII2_RD2",
+		"RGMII2_RD1",
+		"RGMII2_RD0",
+		"PMIC_INT1",
+		"GPMC_CSN0_Flash",
+		"MMC1_CLK",
+		"MMC1_CMD";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"GPMC_CSN3_BUS",
+		"GPMC_CLK",
+		"GPMC_ADVN_ALE",
+		"GPMC_OEN_RE_N",
+		"GPMC_WE_N",
+		"GPMC_BEN0_CLE",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"SW2_0",
+		"SW2_1",
+		"NC",
+		"NC",
+		"UART1_DTR",
+		"UART1_DSR",
+		"UART1_DCD",
+		"UART1_RI",
+		"MMC0_DAT3",
+		"MMC0_DAT2",
+		"MMC0_DAT1",
+		"MMC0_DAT0",
+		"MMC0_CLK",
+		"MMC0_CMD";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"onrisc:red:power",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"UART2_CTSN",
+		"UART2_RTSN",
+		"WLAN_IRQ",
+		"WLAN_EN",
+		"SW2_2",
+		"SW2_3",
+		"NC",
+		"NC",
+		"NC",
+		"ModeA0",
+		"ModeA1",
+		"ModeA2",
+		"ModeA3",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC";
+};
diff --git a/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts
index 96dffd3ffd85..ad3adc7679f9 100644
--- a/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts
+++ b/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts
@@ -71,6 +71,10 @@
 		interrupts = <20 IRQ_TYPE_EDGE_RISING>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&tca6416_pins>;
+		gpio-line-names = "GP_IN0", "GP_IN1", "GP_IN2", "GP_IN3",
+				  "GP_IN4", "GP_IN5", "GP_IN6", "GP_IN7",
+				  "GP_OUT0", "GP_OUT1", "GP_OUT2", "GP_OUT3",
+				  "GP_OUT4", "GP_OUT5", "GP_OUT6", "GP_OUT7";
 	};
 };
 
@@ -86,6 +90,10 @@
 		reg = <0x20>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		gpio-line-names = "CH1_M0", "CH1_M1", "CH1_M2", "CH1_M3",
+				  "CH2_M0", "CH2_M1", "CH2_M2", "CH2_M3",
+				  "CH3_M0", "CH3_M1", "CH3_M2", "CH3_M3",
+				  "CH4_M0", "CH4_M1", "CH4_M2", "CH4_M3";
 	};
 
 	tca6416c: gpio@21 {
@@ -93,6 +101,10 @@
 		reg = <0x21>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		gpio-line-names = "CH5_M0", "CH5_M1", "CH5_M2", "CH5_M3",
+				  "CH6_M0", "CH6_M1", "CH6_M2", "CH6_M3",
+				  "CH7_M0", "CH7_M1", "CH7_M2", "CH7_M3",
+				  "CH8_M0", "CH8_M1", "CH8_M2", "CH8_M3";
 	};
 };
 
@@ -113,3 +125,147 @@
 	ti,dual-emac-pvid = <2>;
 	phy-handle = <&phy1>;
 };
+
+&gpio0 {
+	gpio-line-names =
+		"MDIO",
+		"MDC",
+		"NC",
+		"NC",
+		"I2C1_SDA",
+		"I2C1_SCL",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"I2C2_SDA",
+		"I2C2_SCL",
+		"NC",
+		"NC",
+		"onrisc:blue:wlan",
+		"onrisc:green:app",
+		"USB0_DRVVBUS",
+		"ETH2_INT",
+		"NC",
+		"NC",
+		"MMC1_DAT0",
+		"MMC1_DAT1",
+		"NC",
+		"NC",
+		"MMC1_DAT2",
+		"MMC1_DAT3",
+		"NC",
+		"NC",
+		"GPMC_WAIT0",
+		"GPMC_WP_N";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"GPMC_AD0",
+		"GPMC_AD1",
+		"GPMC_AD2",
+		"GPMC_AD3",
+		"GPMC_AD4",
+		"GPMC_AD5",
+		"GPMC_AD6",
+		"GPMC_AD7",
+		"NC",
+		"NC",
+		"CONSOLE_RX",
+		"CONSOLE_TX",
+		"SW2_0_alt",
+		"SW2_1_alt",
+		"SW2_2_alt",
+		"SW2_3_alt",
+		"RGMII2_TCTL",
+		"RGMII2_RCTL",
+		"RGMII2_TD3",
+		"RGMII2_TD2",
+		"RGMII2_TD1",
+		"RGMII2_TD0",
+		"RGMII2_TCLK",
+		"RGMII2_RCLK",
+		"RGMII2_RD3",
+		"RGMII2_RD2",
+		"RGMII2_RD1",
+		"RGMII2_RD0",
+		"PMIC_INT1",
+		"GPMC_CSN0_Flash",
+		"MMC1_CLK",
+		"MMC1_CMD";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"GPMC_CSN3_BUS",
+		"GPMC_CLK",
+		"GPMC_ADVN_ALE",
+		"GPMC_OEN_RE_N",
+		"GPMC_WE_N",
+		"GPMC_BEN0_CLE",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"SW2_0",
+		"SW2_1",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"MMC0_DAT3",
+		"MMC0_DAT2",
+		"MMC0_DAT1",
+		"MMC0_DAT0",
+		"MMC0_CLK",
+		"MMC0_CMD";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"onrisc:red:power",
+		"NC",
+		"NC",
+		"NC",
+		"3G_PWR_EN",
+		"NC",
+		"NC",
+		"WLAN_IRQ",
+		"WLAN_EN",
+		"SW2_2",
+		"SW2_3",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC";
+};
diff --git a/arch/arm/boot/dts/am335x-pcm-953.dtsi b/arch/arm/boot/dts/am335x-pcm-953.dtsi
index 124026fa0d09..947497413977 100644
--- a/arch/arm/boot/dts/am335x-pcm-953.dtsi
+++ b/arch/arm/boot/dts/am335x-pcm-953.dtsi
@@ -12,22 +12,20 @@
 	compatible = "phytec,am335x-pcm-953", "phytec,am335x-phycore-som", "ti,am33xx";
 
 	/* Power */
-	regulators {
-		vcc3v3: fixedregulator@1 {
-			compatible = "regulator-fixed";
-			regulator-name = "vcc3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-		};
+	vcc3v3: fixedregulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
 
-		vcc1v8: fixedregulator@2 {
-			compatible = "regulator-fixed";
-			regulator-name = "vcc1v8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-		};
+	vcc1v8: fixedregulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
 	};
 
 	/* User IO */
@@ -54,14 +52,14 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&user_buttons_pins>;
 
-		button@0 {
+		button-0 {
 			label = "home";
 			linux,code = <KEY_HOME>;
 			gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
 			wakeup-source;
 		};
 
-		button@1 {
+		button-1 {
 			label = "menu";
 			linux,code = <KEY_MENU>;
 			gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/am335x-pdu001.dts b/arch/arm/boot/dts/am335x-pdu001.dts
index b793beeab245..ce6cc2b96654 100644
--- a/arch/arm/boot/dts/am335x-pdu001.dts
+++ b/arch/arm/boot/dts/am335x-pdu001.dts
@@ -353,7 +353,7 @@
 		};
 	};
 
-	mcp79400: mcp79400@6f {
+	mcp79400: rtc@6f {
 		compatible = "microchip,mcp7940x";
 		reg = <0x6f>;
 	};
diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts
index b5e88e627bc1..8691eec33b61 100644
--- a/arch/arm/boot/dts/am335x-pepper.dts
+++ b/arch/arm/boot/dts/am335x-pepper.dts
@@ -596,24 +596,22 @@
 &buttons {
 	pinctrl-names = "default";
 	pinctrl-0 = <&user_buttons_pins>;
-	#address-cells = <1>;
-	#size-cells = <0>;
 
-	button0 {
+	button-0 {
 		label = "home";
 		linux,code = <KEY_HOME>;
 		gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
 		wakeup-source;
 	};
 
-	button1 {
+	button-1 {
 		label = "menu";
 		linux,code = <KEY_MENU>;
 		gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
 		wakeup-source;
 	};
 
-	buttons2 {
+	button-2 {
 		label = "power";
 		linux,code = <KEY_POWER>;
 		gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi
index f65cd1331315..e2cec1ffaa4c 100644
--- a/arch/arm/boot/dts/am335x-phycore-som.dtsi
+++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi
@@ -331,7 +331,7 @@
 	pinctrl-0 = <&spi0_pins>;
 	status = "okay";
 
-	serial_flash: m25p80@0 {
+	serial_flash: flash@0 {
 		compatible = "jedec,spi-nor";
 		spi-max-frequency = <48000000>;
 		reg = <0x0>;
diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe-extended-wifi.dts b/arch/arm/boot/dts/am335x-sancloud-bbe-extended-wifi.dts
new file mode 100644
index 000000000000..a2676d10c24a
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-sancloud-bbe-extended-wifi.dts
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2021 Sancloud Ltd
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+#include "am335x-boneblack-common.dtsi"
+#include "am335x-sancloud-bbe-common.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "SanCloud BeagleBone Enhanced Extended WiFi";
+	compatible = "sancloud,am335x-boneenhanced",
+		     "ti,am335x-bone-black",
+		     "ti,am335x-bone",
+		     "ti,am33xx";
+
+	wlan_en_reg: fixedregulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+	};
+};
+
+&am33xx_pinmux {
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+			/* gpmc_a9.gpio1_25: RADIO_EN */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_OUTPUT_PULLUP, MUX_MODE7)
+
+			/* gpmc_ad12.mmc2_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE3)
+
+			/* gpmc_ad13.mmc2_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE3)
+
+			/* gpmc_ad14.mmc2_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE3)
+
+			/* gpmc_ad15.mmc2_dat3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE3)
+
+			/* gpmc_csn3.mmc2_cmd */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3)
+
+			/* gpmc_clk.mmc2_clk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3)
+		>;
+	};
+
+	bluetooth_pins: pinmux_bluetooth_pins {
+		pinctrl-single,pins = <
+			/* event_intr0.gpio0_19 */
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			/* uart1_rxd */
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
+
+			/* uart1_txd */
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)
+
+			/* uart1_ctsn */
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
+
+			/* uart1_rtsn */
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+};
+
+&i2c2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	status = "okay";
+	vmmc-supply = <&wlan_en_reg>;
+	bus-width = <4>;
+	non-removable;
+	cap-power-off-card;
+	ti,needs-special-hs-handling;
+	keep-power-in-suspend;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins>;
+	dmas = <&edma_xbar 12 0 1
+		&edma_xbar 13 0 2>;
+	dma-names = "tx", "rx";
+	clock-frequency = <50000000>;
+	max-frequency = <50000000>;
+};
+
+&uart1 {
+	status = "okay";
+
+	bluetooth {
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1_pins &bluetooth_pins>;
+		compatible = "qcom,qca6174-bt";
+		enable-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+		clocks = <&l4ls_clkctrl AM3_L4LS_UART2_CLKCTRL 0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <19 IRQ_TYPE_EDGE_RISING>;
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts
index 6b9877560741..c497200f9cb0 100644
--- a/arch/arm/boot/dts/am335x-shc.dts
+++ b/arch/arm/boot/dts/am335x-shc.dts
@@ -36,10 +36,10 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		back_button {
+		back-button {
 			label = "Back Button";
 			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_BACK>;
@@ -47,7 +47,7 @@
 			wakeup-source;
 		};
 
-		front_button {
+		front-button {
 			label = "Front Button";
 			gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_FRONT>;
diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts
index 6516907ed579..73b5d1a024bd 100644
--- a/arch/arm/boot/dts/am335x-sl50.dts
+++ b/arch/arm/boot/dts/am335x-sl50.dts
@@ -588,7 +588,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi0_pins>;
 
-	flash: n25q032@1 {
+	flash: flash@1 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "micron,n25q032";
diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi
index 673159d93a6a..f957fea8208e 100644
--- a/arch/arm/boot/dts/am335x-wega.dtsi
+++ b/arch/arm/boot/dts/am335x-wega.dtsi
@@ -55,7 +55,7 @@
 		2 1 0 0 /* # 0: INACTIVE, 1: TX, 2: RX */
 	>;
 	tx-num-evt = <16>;
-	rt-num-evt = <16>;
+	rx-num-evt = <16>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/am33xx-clocks.dtsi b/arch/arm/boot/dts/am33xx-clocks.dtsi
index b7b7106f2dee..d34483ae1778 100644
--- a/arch/arm/boot/dts/am33xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am33xx-clocks.dtsi
@@ -5,251 +5,288 @@
  * Copyright (C) 2013 Texas Instruments, Inc.
  */
 &scm_clocks {
-	sys_clkin_ck: sys_clkin_ck@40 {
+	sys_clkin_ck: clock-sys-clkin-22@40 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "sys_clkin_ck";
 		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
 		ti,bit-shift = <22>;
 		reg = <0x0040>;
 	};
 
-	adc_tsc_fck: adc_tsc_fck {
+	adc_tsc_fck: clock-adc-tsc-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "adc_tsc_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dcan0_fck: dcan0_fck {
+	dcan0_fck: clock-dcan0-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dcan0_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dcan1_fck: dcan1_fck {
+	dcan1_fck: clock-dcan1-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dcan1_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	mcasp0_fck: mcasp0_fck {
+	mcasp0_fck: clock-mcasp0-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "mcasp0_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	mcasp1_fck: mcasp1_fck {
+	mcasp1_fck: clock-mcasp1-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "mcasp1_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	smartreflex0_fck: smartreflex0_fck {
+	smartreflex0_fck: clock-smartreflex0-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "smartreflex0_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	smartreflex1_fck: smartreflex1_fck {
+	smartreflex1_fck: clock-smartreflex1-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "smartreflex1_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	sha0_fck: sha0_fck {
+	sha0_fck: clock-sha0-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "sha0_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	aes0_fck: aes0_fck {
+	aes0_fck: clock-aes0-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "aes0_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	rng_fck: rng_fck {
+	rng_fck: clock-rng-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "rng_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	ehrpwm0_tbclk: ehrpwm0_tbclk@44e10664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4ls_gclk>;
-		ti,bit-shift = <0>;
-		reg = <0x0664>;
-	};
+	clock@664 {
+		compatible = "ti,clksel";
+		reg = <0x664>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
 
-	ehrpwm1_tbclk: ehrpwm1_tbclk@44e10664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4ls_gclk>;
-		ti,bit-shift = <1>;
-		reg = <0x0664>;
-	};
+		ehrpwm0_tbclk: clock-ehrpwm0-tbclk {
+			#clock-cells = <0>;
+			compatible = "ti,gate-clock";
+			clock-output-names = "ehrpwm0_tbclk";
+			clocks = <&l4ls_gclk>;
+			ti,bit-shift = <0>;
+		};
 
-	ehrpwm2_tbclk: ehrpwm2_tbclk@44e10664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4ls_gclk>;
-		ti,bit-shift = <2>;
-		reg = <0x0664>;
+		ehrpwm1_tbclk: clock-ehrpwm1-tbclk {
+			#clock-cells = <0>;
+			compatible = "ti,gate-clock";
+			clock-output-names = "ehrpwm1_tbclk";
+			clocks = <&l4ls_gclk>;
+			ti,bit-shift = <1>;
+		};
+
+		ehrpwm2_tbclk: clock-ehrpwm2-tbclk {
+			#clock-cells = <0>;
+			compatible = "ti,gate-clock";
+			clock-output-names = "ehrpwm2_tbclk";
+			clocks = <&l4ls_gclk>;
+			ti,bit-shift = <2>;
+		};
 	};
 };
 &prcm_clocks {
-	clk_32768_ck: clk_32768_ck {
+	clk_32768_ck: clock-clk-32768 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "clk_32768_ck";
 		clock-frequency = <32768>;
 	};
 
-	clk_rc32k_ck: clk_rc32k_ck {
+	clk_rc32k_ck: clock-clk-rc32k {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "clk_rc32k_ck";
 		clock-frequency = <32000>;
 	};
 
-	virt_19200000_ck: virt_19200000_ck {
+	virt_19200000_ck: clock-virt-19200000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_19200000_ck";
 		clock-frequency = <19200000>;
 	};
 
-	virt_24000000_ck: virt_24000000_ck {
+	virt_24000000_ck: clock-virt-24000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_24000000_ck";
 		clock-frequency = <24000000>;
 	};
 
-	virt_25000000_ck: virt_25000000_ck {
+	virt_25000000_ck: clock-virt-25000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_25000000_ck";
 		clock-frequency = <25000000>;
 	};
 
-	virt_26000000_ck: virt_26000000_ck {
+	virt_26000000_ck: clock-virt-26000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_26000000_ck";
 		clock-frequency = <26000000>;
 	};
 
-	tclkin_ck: tclkin_ck {
+	tclkin_ck: clock-tclkin {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "tclkin_ck";
 		clock-frequency = <12000000>;
 	};
 
-	dpll_core_ck: dpll_core_ck@490 {
+	dpll_core_ck: clock@490 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-core-clock";
+		clock-output-names = "dpll_core_ck";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
 		reg = <0x0490>, <0x045c>, <0x0468>, <0x0460>, <0x0464>;
 	};
 
-	dpll_core_x2_ck: dpll_core_x2_ck {
+	dpll_core_x2_ck: clock-dpll-core-x2 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-x2-clock";
+		clock-output-names = "dpll_core_x2_ck";
 		clocks = <&dpll_core_ck>;
 	};
 
-	dpll_core_m4_ck: dpll_core_m4_ck@480 {
+	dpll_core_m4_ck: clock-dpll-core-m4@480 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_m4_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <31>;
 		reg = <0x0480>;
 		ti,index-starts-at-one;
 	};
 
-	dpll_core_m5_ck: dpll_core_m5_ck@484 {
+	dpll_core_m5_ck: clock-dpll-core-m5@484 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_m5_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <31>;
 		reg = <0x0484>;
 		ti,index-starts-at-one;
 	};
 
-	dpll_core_m6_ck: dpll_core_m6_ck@4d8 {
+	dpll_core_m6_ck: clock-dpll-core-m6@4d8 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_m6_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <31>;
 		reg = <0x04d8>;
 		ti,index-starts-at-one;
 	};
 
-	dpll_mpu_ck: dpll_mpu_ck@488 {
+	dpll_mpu_ck: clock@488 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-clock";
+		clock-output-names = "dpll_mpu_ck";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
 		reg = <0x0488>, <0x0420>, <0x042c>, <0x0424>, <0x0428>;
 	};
 
-	dpll_mpu_m2_ck: dpll_mpu_m2_ck@4a8 {
+	dpll_mpu_m2_ck: clock-dpll-mpu-m2@4a8 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_mpu_m2_ck";
 		clocks = <&dpll_mpu_ck>;
 		ti,max-div = <31>;
 		reg = <0x04a8>;
 		ti,index-starts-at-one;
 	};
 
-	dpll_ddr_ck: dpll_ddr_ck@494 {
+	dpll_ddr_ck: clock@494 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-no-gate-clock";
+		clock-output-names = "dpll_ddr_ck";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
 		reg = <0x0494>, <0x0434>, <0x0440>, <0x0438>, <0x043c>;
 	};
 
-	dpll_ddr_m2_ck: dpll_ddr_m2_ck@4a0 {
+	dpll_ddr_m2_ck: clock-dpll-ddr-m2@4a0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_ddr_m2_ck";
 		clocks = <&dpll_ddr_ck>;
 		ti,max-div = <31>;
 		reg = <0x04a0>;
 		ti,index-starts-at-one;
 	};
 
-	dpll_ddr_m2_div2_ck: dpll_ddr_m2_div2_ck {
+	dpll_ddr_m2_div2_ck: clock-dpll-ddr-m2-div2 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dpll_ddr_m2_div2_ck";
 		clocks = <&dpll_ddr_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	dpll_disp_ck: dpll_disp_ck@498 {
+	dpll_disp_ck: clock@498 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-no-gate-clock";
+		clock-output-names = "dpll_disp_ck";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
 		reg = <0x0498>, <0x0448>, <0x0454>, <0x044c>, <0x0450>;
 	};
 
-	dpll_disp_m2_ck: dpll_disp_m2_ck@4a4 {
+	dpll_disp_m2_ck: clock-dpll-disp-m2@4a4 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_disp_m2_ck";
 		clocks = <&dpll_disp_ck>;
 		ti,max-div = <31>;
 		reg = <0x04a4>;
@@ -257,418 +294,484 @@
 		ti,set-rate-parent;
 	};
 
-	dpll_per_ck: dpll_per_ck@48c {
+	dpll_per_ck: clock@48c {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-no-gate-j-type-clock";
+		clock-output-names = "dpll_per_ck";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
 		reg = <0x048c>, <0x0470>, <0x049c>, <0x0474>, <0x0478>;
 	};
 
-	dpll_per_m2_ck: dpll_per_m2_ck@4ac {
+	dpll_per_m2_ck: clock-dpll-per-m2@4ac {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_m2_ck";
 		clocks = <&dpll_per_ck>;
 		ti,max-div = <31>;
 		reg = <0x04ac>;
 		ti,index-starts-at-one;
 	};
 
-	dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck {
+	dpll_per_m2_div4_wkupdm_ck: clock-dpll-per-m2-div4-wkupdm {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dpll_per_m2_div4_wkupdm_ck";
 		clocks = <&dpll_per_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <4>;
 	};
 
-	dpll_per_m2_div4_ck: dpll_per_m2_div4_ck {
+	dpll_per_m2_div4_ck: clock-dpll-per-m2-div4 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dpll_per_m2_div4_ck";
 		clocks = <&dpll_per_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <4>;
 	};
 
-	clk_24mhz: clk_24mhz {
+	clk_24mhz: clock-clk-24mhz {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "clk_24mhz";
 		clocks = <&dpll_per_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <8>;
 	};
 
-	clkdiv32k_ck: clkdiv32k_ck {
+	clkdiv32k_ck: clock-clkdiv32k {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "clkdiv32k_ck";
 		clocks = <&clk_24mhz>;
 		clock-mult = <1>;
 		clock-div = <732>;
 	};
 
-	l3_gclk: l3_gclk {
+	l3_gclk: clock-l3-gclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "l3_gclk";
 		clocks = <&dpll_core_m4_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	pruss_ocp_gclk: pruss_ocp_gclk@530 {
+	pruss_ocp_gclk: clock-pruss-ocp-gclk@530 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "pruss_ocp_gclk";
 		clocks = <&l3_gclk>, <&dpll_disp_m2_ck>;
 		reg = <0x0530>;
 	};
 
-	mmu_fck: mmu_fck@914 {
+	mmu_fck: clock-mmu-fck-1@914 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "mmu_fck";
 		clocks = <&dpll_core_m4_ck>;
 		ti,bit-shift = <1>;
 		reg = <0x0914>;
 	};
 
-	timer1_fck: timer1_fck@528 {
+	timer1_fck: clock-timer1-fck@528 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer1_fck";
 		clocks = <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>;
 		reg = <0x0528>;
 	};
 
-	timer2_fck: timer2_fck@508 {
+	timer2_fck: clock-timer2-fck@508 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer2_fck";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
 		reg = <0x0508>;
 	};
 
-	timer3_fck: timer3_fck@50c {
+	timer3_fck: clock-timer3-fck@50c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer3_fck";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
 		reg = <0x050c>;
 	};
 
-	timer4_fck: timer4_fck@510 {
+	timer4_fck: clock-timer4-fck@510 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer4_fck";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
 		reg = <0x0510>;
 	};
 
-	timer5_fck: timer5_fck@518 {
+	timer5_fck: clock-timer5-fck@518 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer5_fck";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
 		reg = <0x0518>;
 	};
 
-	timer6_fck: timer6_fck@51c {
+	timer6_fck: clock-timer6-fck@51c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer6_fck";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
 		reg = <0x051c>;
 	};
 
-	timer7_fck: timer7_fck@504 {
+	timer7_fck: clock-timer7-fck@504 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer7_fck";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
 		reg = <0x0504>;
 	};
 
-	usbotg_fck: usbotg_fck@47c {
+	usbotg_fck: clock-usbotg-fck-8@47c {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "usbotg_fck";
 		clocks = <&dpll_per_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x047c>;
 	};
 
-	dpll_core_m4_div2_ck: dpll_core_m4_div2_ck {
+	dpll_core_m4_div2_ck: clock-dpll-core-m4-div2 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dpll_core_m4_div2_ck";
 		clocks = <&dpll_core_m4_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	ieee5000_fck: ieee5000_fck@e4 {
+	ieee5000_fck: clock-ieee5000-fck-1@e4 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "ieee5000_fck";
 		clocks = <&dpll_core_m4_div2_ck>;
 		ti,bit-shift = <1>;
 		reg = <0x00e4>;
 	};
 
-	wdt1_fck: wdt1_fck@538 {
+	wdt1_fck: clock-wdt1-fck@538 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "wdt1_fck";
 		clocks = <&clk_rc32k_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
 		reg = <0x0538>;
 	};
 
-	l4_rtc_gclk: l4_rtc_gclk {
+	l4_rtc_gclk: clock-l4-rtc-gclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "l4_rtc_gclk";
 		clocks = <&dpll_core_m4_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	l4hs_gclk: l4hs_gclk {
+	l4hs_gclk: clock-l4hs-gclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "l4hs_gclk";
 		clocks = <&dpll_core_m4_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	l3s_gclk: l3s_gclk {
+	l3s_gclk: clock-l3s-gclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "l3s_gclk";
 		clocks = <&dpll_core_m4_div2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	l4fw_gclk: l4fw_gclk {
+	l4fw_gclk: clock-l4fw-gclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "l4fw_gclk";
 		clocks = <&dpll_core_m4_div2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	l4ls_gclk: l4ls_gclk {
+	l4ls_gclk: clock-l4ls-gclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "l4ls_gclk";
 		clocks = <&dpll_core_m4_div2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	sysclk_div_ck: sysclk_div_ck {
+	sysclk_div_ck: clock-sysclk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "sysclk_div_ck";
 		clocks = <&dpll_core_m4_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	cpsw_125mhz_gclk: cpsw_125mhz_gclk {
+	cpsw_125mhz_gclk: clock-cpsw-125mhz-gclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "cpsw_125mhz_gclk";
 		clocks = <&dpll_core_m5_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk@520 {
+	cpsw_cpts_rft_clk: clock-cpsw-cpts-rft@520 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "cpsw_cpts_rft_clk";
 		clocks = <&dpll_core_m5_ck>, <&dpll_core_m4_ck>;
 		reg = <0x0520>;
 	};
 
-	gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck@53c {
+	gpio0_dbclk_mux_ck: clock-gpio0-dbclk-mux@53c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "gpio0_dbclk_mux_ck";
 		clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
 		reg = <0x053c>;
 	};
 
-	lcd_gclk: lcd_gclk@534 {
+	lcd_gclk: clock-lcd-gclk@534 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "lcd_gclk";
 		clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
 		reg = <0x0534>;
 		ti,set-rate-parent;
 	};
 
-	mmc_clk: mmc_clk {
+	mmc_clk: clock-mmc {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "mmc_clk";
 		clocks = <&dpll_per_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	gfx_fclk_clksel_ck: gfx_fclk_clksel_ck@52c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_core_m4_ck>, <&dpll_per_m2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x052c>;
-	};
+	clock@52c {
+		compatible = "ti,clksel";
+		reg = <0x52c>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
 
-	gfx_fck_div_ck: gfx_fck_div_ck@52c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&gfx_fclk_clksel_ck>;
-		reg = <0x052c>;
-		ti,max-div = <2>;
-	};
+		gfx_fclk_clksel_ck: clock-gfx-fclk-clksel {
+			#clock-cells = <0>;
+			compatible = "ti,mux-clock";
+			clock-output-names = "gfx_fclk_clksel_ck";
+			clocks = <&dpll_core_m4_ck>, <&dpll_per_m2_ck>;
+			ti,bit-shift = <1>;
+		};
 
-	sysclkout_pre_ck: sysclkout_pre_ck@700 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_32768_ck>, <&l3_gclk>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&lcd_gclk>;
-		reg = <0x0700>;
+		gfx_fck_div_ck: clock-gfx-fck-div {
+			#clock-cells = <0>;
+			compatible = "ti,divider-clock";
+			clock-output-names = "gfx_fck_div_ck";
+			clocks = <&gfx_fclk_clksel_ck>;
+			ti,max-div = <2>;
+		};
 	};
 
-	clkout2_div_ck: clkout2_div_ck@700 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sysclkout_pre_ck>;
-		ti,bit-shift = <3>;
-		ti,max-div = <8>;
-		reg = <0x0700>;
-	};
+	clock@700 {
+		compatible = "ti,clksel";
+		reg = <0x700>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
 
-	clkout2_ck: clkout2_ck@700 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkout2_div_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x0700>;
+		sysclkout_pre_ck: clock-sysclkout-pre {
+			#clock-cells = <0>;
+			compatible = "ti,mux-clock";
+			clock-output-names = "sysclkout_pre_ck";
+			clocks = <&clk_32768_ck>, <&l3_gclk>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&lcd_gclk>;
+		};
+
+		clkout2_div_ck: clock-clkout2-div {
+			#clock-cells = <0>;
+			compatible = "ti,divider-clock";
+			clock-output-names = "clkout2_div_ck";
+			clocks = <&sysclkout_pre_ck>;
+			ti,bit-shift = <3>;
+			ti,max-div = <8>;
+		};
+
+		clkout2_ck: clock-clkout2 {
+			#clock-cells = <0>;
+			compatible = "ti,gate-clock";
+			clock-output-names = "clkout2_ck";
+			clocks = <&clkout2_div_ck>;
+			ti,bit-shift = <7>;
+		};
 	};
 };
 
 &prcm {
-	per_cm: per-cm@0 {
+	per_cm: clock@0 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "per_cm";
 		reg = <0x0 0x400>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x0 0x400>;
 
-		l4ls_clkctrl: l4ls-clkctrl@38 {
+		l4ls_clkctrl: clock@38 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l4ls_clkctrl";
 			reg = <0x38 0x2c>, <0x6c 0x28>, <0xac 0xc>, <0xc0 0x1c>, <0xec 0xc>, <0x10c 0x8>, <0x130 0x4>;
 			#clock-cells = <2>;
 		};
 
-		l3s_clkctrl: l3s-clkctrl@1c {
+		l3s_clkctrl: clock@1c {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3s_clkctrl";
 			reg = <0x1c 0x4>, <0x30 0x8>, <0x68 0x4>, <0xf8 0x4>;
 			#clock-cells = <2>;
 		};
 
-		l3_clkctrl: l3-clkctrl@24 {
+		l3_clkctrl: clock@24 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3_clkctrl";
 			reg = <0x24 0xc>, <0x94 0x10>, <0xbc 0x4>, <0xdc 0x8>, <0xfc 0x8>;
 			#clock-cells = <2>;
 		};
 
-		l4hs_clkctrl: l4hs-clkctrl@120 {
+		l4hs_clkctrl: clock@120 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l4hs_clkctrl";
 			reg = <0x120 0x4>;
 			#clock-cells = <2>;
 		};
 
-		pruss_ocp_clkctrl: pruss-ocp-clkctrl@e8 {
+		pruss_ocp_clkctrl: clock@e8 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "pruss_ocp_clkctrl";
 			reg = <0xe8 0x4>;
 			#clock-cells = <2>;
 		};
 
-		cpsw_125mhz_clkctrl: cpsw-125mhz-clkctrl@0 {
+		cpsw_125mhz_clkctrl: clock@0 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "cpsw_125mhz_clkctrl";
 			reg = <0x0 0x18>;
 			#clock-cells = <2>;
 		};
 
-		lcdc_clkctrl: lcdc-clkctrl@18 {
+		lcdc_clkctrl: clock@18 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "lcdc_clkctrl";
 			reg = <0x18 0x4>;
 			#clock-cells = <2>;
 		};
 
-		clk_24mhz_clkctrl: clk-24mhz-clkctrl@14c {
+		clk_24mhz_clkctrl: clock@14c {
 			compatible = "ti,clkctrl";
+			clock-output-names = "clk_24mhz_clkctrl";
 			reg = <0x14c 0x4>;
 			#clock-cells = <2>;
 		};
 	};
 
-	wkup_cm: wkup-cm@400 {
+	wkup_cm: clock@400 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "wkup_cm";
 		reg = <0x400 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x400 0x100>;
 
-		l4_wkup_clkctrl: l4-wkup-clkctrl@0 {
+		l4_wkup_clkctrl: clock@0 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l4_wkup_clkctrl";
 			reg = <0x0 0x10>, <0xb4 0x24>;
 			#clock-cells = <2>;
 		};
 
-		l3_aon_clkctrl: l3-aon-clkctrl@14 {
+		l3_aon_clkctrl: clock@14 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3_aon_clkctrl";
 			reg = <0x14 0x4>;
 			#clock-cells = <2>;
 		};
 
-		l4_wkup_aon_clkctrl: l4-wkup-aon-clkctrl@b0 {
+		l4_wkup_aon_clkctrl: clock@b0 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l4_wkup_aon_clkctrl";
 			reg = <0xb0 0x4>;
 			#clock-cells = <2>;
 		};
 	};
 
-	mpu_cm: mpu-cm@600 {
+	mpu_cm: clock@600 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "mpu_cm";
 		reg = <0x600 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x600 0x100>;
 
-		mpu_clkctrl: mpu-clkctrl@0 {
+		mpu_clkctrl: clock@0 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "mpu_clkctrl";
 			reg = <0x0 0x8>;
 			#clock-cells = <2>;
 		};
 	};
 
-	l4_rtc_cm: l4-rtc-cm@800 {
+	l4_rtc_cm: clock@800 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l4_rtc_cm";
 		reg = <0x800 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x800 0x100>;
 
-		l4_rtc_clkctrl: l4-rtc-clkctrl@0 {
+		l4_rtc_clkctrl: clock@0 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l4_rtc_clkctrl";
 			reg = <0x0 0x4>;
 			#clock-cells = <2>;
 		};
 	};
 
-	gfx_l3_cm: gfx-l3-cm@900 {
+	gfx_l3_cm: clock@900 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "gfx_l3_cm";
 		reg = <0x900 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x900 0x100>;
 
-		gfx_l3_clkctrl: gfx-l3-clkctrl@0 {
+		gfx_l3_clkctrl: clock@0 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "gfx_l3_clkctrl";
 			reg = <0x0 0x8>;
 			#clock-cells = <2>;
 		};
 	};
 
-	l4_cefuse_cm: l4-cefuse-cm@a00 {
+	l4_cefuse_cm: clock@a00 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l4_cefuse_cm";
 		reg = <0xa00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0xa00 0x100>;
 
-		l4_cefuse_clkctrl: l4-cefuse-clkctrl@0 {
+		l4_cefuse_clkctrl: clock@0 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l4_cefuse_clkctrl";
 			reg = <0x0 0x24>;
 			#clock-cells = <2>;
 		};
diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi
index c9629cb5ccd1..7e50fe633d8a 100644
--- a/arch/arm/boot/dts/am33xx-l4.dtsi
+++ b/arch/arm/boot/dts/am33xx-l4.dtsi
@@ -263,6 +263,8 @@
 				compatible = "ti,am3359-tscadc";
 				reg = <0x0 0x1000>;
 				interrupts = <16>;
+				clocks = <&adc_tsc_fck>;
+				clock-names = "fck";
 				status = "disabled";
 				dmas = <&edma 53 0>, <&edma 57 0>;
 				dma-names = "fifo0", "fifo1";
@@ -1500,8 +1502,7 @@
 			mmc1: mmc@0 {
 				compatible = "ti,am335-sdhci";
 				ti,needs-special-reset;
-				dmas = <&edma_xbar 24 0 0
-					&edma_xbar 25 0 0>;
+				dmas = <&edma 24 0>, <&edma 25 0>;
 				dma-names = "tx", "rx";
 				interrupts = <64>;
 				reg = <0x0 0x1000>;
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index f6ec85d58dd1..32d397b3950b 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for AM33XX SoC
  *
  * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/bus/ti-sysc.h>
@@ -461,8 +458,11 @@
 				interrupts = <17>;
 				interrupt-names = "glue";
 				#dma-cells = <2>;
+				/* For backwards compatibility: */
 				#dma-channels = <30>;
+				dma-channels = <30>;
 				#dma-requests = <256>;
+				dma-requests = <256>;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/am3517-evm-ui.dtsi b/arch/arm/boot/dts/am3517-evm-ui.dtsi
index 7d8f32bf70db..75ad42179aee 100644
--- a/arch/arm/boot/dts/am3517-evm-ui.dtsi
+++ b/arch/arm/boot/dts/am3517-evm-ui.dtsi
@@ -70,61 +70,61 @@
 		compatible = "gpio-keys-polled";
 		poll-interval = <100>;
 
-		record {
+		key-record {
 			label = "Record";
 			/* linux,code = <BTN_0>; */
 			gpios = <&tca6416_2 15 GPIO_ACTIVE_LOW>;
 		};
 
-		play {
+		key-play {
 			label = "Play";
 			linux,code = <KEY_PLAY>;
 			gpios = <&tca6416_2 14 GPIO_ACTIVE_LOW>;
 		};
 
-		Stop {
+		key-stop {
 			label = "Stop";
 			linux,code = <KEY_STOP>;
 			gpios = <&tca6416_2 13 GPIO_ACTIVE_LOW>;
 		};
 
-		fwd {
+		key-fwd {
 			label = "FWD";
 			linux,code = <KEY_FASTFORWARD>;
 			gpios = <&tca6416_2 12 GPIO_ACTIVE_LOW>;
 		};
 
-		rwd {
+		key-rwd {
 			label = "RWD";
 			linux,code = <KEY_REWIND>;
 			gpios = <&tca6416_2 11 GPIO_ACTIVE_LOW>;
 		};
 
-		shift {
+		key-shift {
 			label = "Shift";
 			linux,code = <KEY_LEFTSHIFT>;
 			gpios = <&tca6416_2 10 GPIO_ACTIVE_LOW>;
 		};
 
-		Mode {
+		key-mode {
 			label = "Mode";
 			linux,code = <BTN_MODE>;
 			gpios = <&tca6416_2 9 GPIO_ACTIVE_LOW>;
 		};
 
-		Menu {
+		key-menu {
 			label = "Menu";
 			linux,code = <KEY_MENU>;
 			gpios = <&tca6416_2 8 GPIO_ACTIVE_LOW>;
 		};
 
-		Up {
+		key-up {
 			label = "Up";
 			linux,code = <KEY_UP>;
 			gpios = <&tca6416_2 7 GPIO_ACTIVE_LOW>;
 		};
 
-		Down {
+		key-down {
 			label = "Down";
 			linux,code = <KEY_DOWN>;
 			gpios = <&tca6416_2 6 GPIO_ACTIVE_LOW>;
@@ -137,14 +137,14 @@
 	tlv320aic23_1: codec@1a {
 		compatible = "ti,tlv320aic23";
 		reg = <0x1a>;
-		#sound-dai-cells= <0>;
+		#sound-dai-cells = <0>;
 		status = "okay";
 	};
 
 	tlv320aic23_2: codec@1b {
 		compatible = "ti,tlv320aic23";
 		reg = <0x1b>;
-		#sound-dai-cells= <0>;
+		#sound-dai-cells = <0>;
 		status = "okay";
 	};
 };
@@ -154,7 +154,7 @@
 	tlv320aic23_3: codec@1a {
 		compatible = "ti,tlv320aic23";
 		reg = <0x1a>;
-		#sound-dai-cells= <0>;
+		#sound-dai-cells = <0>;
 		status = "okay";
 	};
 
diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts
index 0d2fac98ce7d..35b653014f2b 100644
--- a/arch/arm/boot/dts/am3517-evm.dts
+++ b/arch/arm/boot/dts/am3517-evm.dts
@@ -37,55 +37,55 @@
 		compatible = "gpio-keys-polled";
 		poll-interval = <100>;
 
-		user_pb {
+		button-user {
 			label = "User Push Button";
 			linux,code = <BTN_0>;
 			gpios = <&tca6416 5 GPIO_ACTIVE_LOW>;
 		};
 
-		user_sw_1 {
+		switch-1 {
 			label = "User Switch 1";
 			linux,code = <BTN_1>;
 			gpios = <&tca6416 8 GPIO_ACTIVE_LOW>;
 		};
 
-		user_sw_2 {
+		switch-2 {
 			label = "User Switch 2";
 			linux,code = <BTN_2>;
 			gpios = <&tca6416 9 GPIO_ACTIVE_LOW>;
 		};
 
-		user_sw_3 {
+		switch-3 {
 			label = "User Switch 3";
 			linux,code = <BTN_3>;
 			gpios = <&tca6416 10 GPIO_ACTIVE_LOW>;
 		};
 
-		user_sw_4 {
+		switch-4 {
 			label = "User Switch 4";
 			linux,code = <BTN_4>;
 			gpios = <&tca6416 11 GPIO_ACTIVE_LOW>;
 		};
 
-		user_sw_5 {
+		switch-5 {
 			label = "User Switch 5";
 			linux,code = <BTN_5>;
 			gpios = <&tca6416 12 GPIO_ACTIVE_LOW>;
 		};
 
-		user_sw_6 {
+		switch-6 {
 			label = "User Switch 6";
 			linux,code = <BTN_6>;
 			gpios = <&tca6416 13 GPIO_ACTIVE_LOW>;
 		};
 
-		user_sw_7 {
+		switch-7 {
 			label = "User Switch 7";
 			linux,code = <BTN_7>;
 			gpios = <&tca6416 14 GPIO_ACTIVE_LOW>;
 		};
 
-		user_sw_8 {
+		switch-8 {
 			label = "User Switch 8";
 			linux,code = <BTN_8>;
 			gpios = <&tca6416 15 GPIO_ACTIVE_LOW>;
@@ -161,6 +161,8 @@
 
 	/* HS USB Host PHY on PORT 1 */
 	hsusb1_phy: hsusb1_phy {
+		pinctrl-names = "default";
+		pinctrl-0 = <&hsusb1_rst_pins>;
 		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */
 		#phy-cells = <0>;
@@ -168,7 +170,9 @@
 };
 
 &davinci_emac {
-	     status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet_pins>;
+	status = "okay";
 };
 
 &davinci_mdio {
@@ -193,6 +197,8 @@
 };
 
 &i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
 	clock-frequency = <400000>;
 	/* User DIP swithes [1:8] / User LEDS [1:2] */
 	tca6416: gpio@21 {
@@ -205,6 +211,8 @@
 };
 
 &i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
 	clock-frequency = <400000>;
 };
 
@@ -223,6 +231,8 @@
 };
 
 &usbhshost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb1_pins>;
 	port1-mode = "ehci-phy";
 };
 
@@ -231,8 +241,35 @@
 };
 
 &omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb1_rst_pins>;
+
+	ethernet_pins: pinmux_ethernet_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21fe, PIN_INPUT | MUX_MODE0) /* rmii_mdio_data */
+			OMAP3_CORE1_IOPAD(0x2200, MUX_MODE0) /* rmii_mdio_clk */
+			OMAP3_CORE1_IOPAD(0x2202, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd0 */
+			OMAP3_CORE1_IOPAD(0x2204, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd1 */
+			OMAP3_CORE1_IOPAD(0x2206, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_crs_dv */
+			OMAP3_CORE1_IOPAD(0x2208, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_rxer */
+			OMAP3_CORE1_IOPAD(0x220a, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd0 */
+			OMAP3_CORE1_IOPAD(0x220c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd1 */
+			OMAP3_CORE1_IOPAD(0x220e, PIN_OUTPUT_PULLDOWN |MUX_MODE0) /* rmii_txen */
+			OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50mhz_clk */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c2_scl */
+			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c3_scl */
+			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c3_sda */
+		>;
+	};
 
 	leds_pins: pinmux_leds_pins {
 		pinctrl-single,pins = <
@@ -300,8 +337,6 @@
 };
 
 &omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb1_pins>;
 
 	hsusb1_pins: pinmux_hsusb1_pins {
 		pinctrl-single,pins = <
diff --git a/arch/arm/boot/dts/am3517-som.dtsi b/arch/arm/boot/dts/am3517-som.dtsi
index 8b669e2eafec..f7b680f6c48a 100644
--- a/arch/arm/boot/dts/am3517-som.dtsi
+++ b/arch/arm/boot/dts/am3517-som.dtsi
@@ -69,6 +69,8 @@
 };
 
 &i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
 	clock-frequency = <400000>;
 
 	s35390a: s35390a@30 {
@@ -179,6 +181,13 @@
 
 &omap3_pmx_core {
 
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c1_sda */
+		>;
+	};
+
 	wl12xx_buffer_pins: pinmux_wl12xx_buffer_pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4)  /* mmc1_dat7.gpio_129 */
diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi
index de33c4f89f33..cb316135bc7c 100644
--- a/arch/arm/boot/dts/am3517.dtsi
+++ b/arch/arm/boot/dts/am3517.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for am3517 SoC
  *
  * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include "omap3.dtsi"
diff --git a/arch/arm/boot/dts/am35xx-clocks.dtsi b/arch/arm/boot/dts/am35xx-clocks.dtsi
index 220d0a52797e..0ee7afaa0e8e 100644
--- a/arch/arm/boot/dts/am35xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am35xx-clocks.dtsi
@@ -62,12 +62,27 @@
 	};
 };
 &cm_clocks {
-	ipss_ick: ipss_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,am35xx-interface-clock";
-		clocks = <&core_l3_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <4>;
+	clock@a10 {
+		compatible = "ti,clksel";
+		reg = <0xa10>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		ipss_ick: clock-ipss-ick {
+			#clock-cells = <0>;
+			compatible = "ti,am35xx-interface-clock";
+			clock-output-names = "ipss_ick";
+			clocks = <&core_l3_ick>;
+			ti,bit-shift = <4>;
+		};
+
+		uart4_ick_am35xx: clock-uart4-ick-am35xx {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "uart4_ick_am35xx";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <23>;
+		};
 	};
 
 	rmii_ck: rmii_ck {
@@ -82,20 +97,19 @@
 		clock-frequency = <27000000>;
 	};
 
-	uart4_ick_am35xx: uart4_ick_am35xx@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <23>;
-	};
+	clock@a00 {
+		compatible = "ti,clksel";
+		reg = <0xa00>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
 
-	uart4_fck_am35xx: uart4_fck_am35xx@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <23>;
+		uart4_fck_am35xx: clock-uart4-fck-am35xx {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "uart4_fck_am35xx";
+			clocks = <&core_48m_fck>;
+			ti,bit-shift = <23>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/am3874-iceboard.dts b/arch/arm/boot/dts/am3874-iceboard.dts
index 9423e9feaa10..d039af879367 100644
--- a/arch/arm/boot/dts/am3874-iceboard.dts
+++ b/arch/arm/boot/dts/am3874-iceboard.dts
@@ -213,7 +213,7 @@
 
 			u48: pca9575@22 {
 				compatible = "nxp,pca9575";
-				reg=<0x22>;
+				reg = <0x22>;
 				gpio-controller;
 				#gpio-cells = <2>;
 
@@ -232,7 +232,7 @@
 
 			u59: pca9575@23 {
 				compatible = "nxp,pca9575";
-				reg=<0x23>;
+				reg = <0x23>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				gpio-line-names =
@@ -434,7 +434,7 @@
 };
 
 &mcspi1 {
-	s25fl256@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 61a1d88f9df6..8613355bbd5e 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for AM4372 SoC
  *
  * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/bus/ti-sysc.h>
diff --git a/arch/arm/boot/dts/am437x-cm-t43.dts b/arch/arm/boot/dts/am437x-cm-t43.dts
index 3e3354780db8..0861e868b75a 100644
--- a/arch/arm/boot/dts/am437x-cm-t43.dts
+++ b/arch/arm/boot/dts/am437x-cm-t43.dts
@@ -302,7 +302,7 @@
 		&edma 17 0>;
 	dma-names = "tx0", "rx0";
 
-	flash: w25q64cvzpig@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 4416ddb559e4..46d5361fe876 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -1127,6 +1127,11 @@
 	cpu0-supply = <&dcdc2>;
 };
 
+&wkup_m3_ipc {
+	ti,set-io-isolation;
+	firmware-name = "am43x-evm-scale-data.bin";
+};
+
 &pruss1_mdio {
 	status = "disabled";
 };
diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts
index 53f64e3ce735..123a95f87554 100644
--- a/arch/arm/boot/dts/am437x-idk-evm.dts
+++ b/arch/arm/boot/dts/am437x-idk-evm.dts
@@ -98,14 +98,12 @@
 		vin-supply = <&v1_5dreg>;
 	};
 
-	gpio_keys: gpio_keys {
+	gpio_keys: gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&gpio_keys_pins_default>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		switch0 {
+		switch-0 {
 			label = "power-button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
@@ -437,7 +435,7 @@
 	pinctrl-1 = <&qspi_pins_sleep>;
 
 	spi-max-frequency = <48000000>;
-	m25p80@0 {
+	flash@0 {
 		compatible = "mx66l51235l";
 		spi-max-frequency = <48000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi
index 8f2268c02778..415210b034ef 100644
--- a/arch/arm/boot/dts/am437x-l4.dtsi
+++ b/arch/arm/boot/dts/am437x-l4.dtsi
@@ -2407,7 +2407,7 @@
 
 				adc {
 					#io-channel-cells = <1>;
-					compatible ="ti,am4372-adc";
+					compatible = "ti,am4372-adc";
 				};
 			};
 		};
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index 20a34d2d85df..036f3831dc26 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -746,7 +746,7 @@
 	pinctrl-0 = <&qspi_pins>;
 
 	spi-max-frequency = <48000000>;
-	m25p80@0 {
+	flash@0 {
 		compatible = "mx66l51235l";
 		spi-max-frequency = <48000000>;
 		reg = <0>;
@@ -893,6 +893,10 @@
 	};
 };
 
+&wkup_m3_ipc {
+	firmware-name = "am43x-evm-scale-data.bin";
+};
+
 &pruss1_mdio {
 	status = "disabled";
 };
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 2f4d2e4e9b3e..27f4ce855549 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -11,7 +11,7 @@
 #include <dt-bindings/pinctrl/am43xx.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pwm/pwm.h>
-#include <dt-bindings/sound/tlv320aic31xx-micbias.h>
+#include <dt-bindings/sound/tlv320aic31xx.h>
 
 / {
 	model = "TI AM43x EPOS EVM";
@@ -902,7 +902,7 @@
 	pinctrl-1 = <&qspi1_pins_sleep>;
 
 	spi-max-frequency = <48000000>;
-	m25p80@0 {
+	flash@0 {
 		compatible = "mx66l51235l";
 		spi-max-frequency = <48000000>;
 		reg = <0>;
@@ -1019,6 +1019,10 @@
 	cpu0-supply = <&dcdc2>;
 };
 
+&wkup_m3_ipc {
+	firmware-name = "am43x-evm-scale-data.bin";
+};
+
 &pruss1_mdio {
 	status = "disabled";
 };
diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi
index 66e892fa3398..9a5437b3d6a8 100644
--- a/arch/arm/boot/dts/am43xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am43xx-clocks.dtsi
@@ -5,217 +5,246 @@
  * Copyright (C) 2013 Texas Instruments, Inc.
  */
 &scm_clocks {
-	sys_clkin_ck: sys_clkin_ck@40 {
+	sys_clkin_ck: clock-sys-clkin-31@40 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "sys_clkin_ck";
 		clocks = <&sysboot_freq_sel_ck>, <&crystal_freq_sel_ck>;
 		ti,bit-shift = <31>;
 		reg = <0x0040>;
 	};
 
-	crystal_freq_sel_ck: crystal_freq_sel_ck@40 {
+	crystal_freq_sel_ck: clock-crystal-freq-sel-29@40 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "crystal_freq_sel_ck";
 		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
 		ti,bit-shift = <29>;
 		reg = <0x0040>;
 	};
 
-	sysboot_freq_sel_ck: sysboot_freq_sel_ck@44e10040 {
+	sysboot_freq_sel_ck: clock-sysboot-freq-sel-22@44e10040 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "sysboot_freq_sel_ck";
 		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
 		ti,bit-shift = <22>;
 		reg = <0x0040>;
 	};
 
-	adc_tsc_fck: adc_tsc_fck {
+	adc_tsc_fck: clock-adc-tsc-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "adc_tsc_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dcan0_fck: dcan0_fck {
+	dcan0_fck: clock-dcan0-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dcan0_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dcan1_fck: dcan1_fck {
+	dcan1_fck: clock-dcan1-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dcan1_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	mcasp0_fck: mcasp0_fck {
+	mcasp0_fck: clock-mcasp0-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "mcasp0_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	mcasp1_fck: mcasp1_fck {
+	mcasp1_fck: clock-mcasp1-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "mcasp1_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	smartreflex0_fck: smartreflex0_fck {
+	smartreflex0_fck: clock-smartreflex0-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "smartreflex0_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	smartreflex1_fck: smartreflex1_fck {
+	smartreflex1_fck: clock-smartreflex1-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "smartreflex1_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	sha0_fck: sha0_fck {
+	sha0_fck: clock-sha0-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "sha0_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	aes0_fck: aes0_fck {
+	aes0_fck: clock-aes0-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "aes0_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	rng_fck: rng_fck {
+	rng_fck: clock-rng-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "rng_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	ehrpwm0_tbclk: ehrpwm0_tbclk@664 {
+	ehrpwm0_tbclk: clock-ehrpwm0-tbclk-0@664 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "ehrpwm0_tbclk";
 		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <0>;
 		reg = <0x0664>;
 	};
 
-	ehrpwm1_tbclk: ehrpwm1_tbclk@664 {
+	ehrpwm1_tbclk: clock-ehrpwm1-tbclk-1@664 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "ehrpwm1_tbclk";
 		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <1>;
 		reg = <0x0664>;
 	};
 
-	ehrpwm2_tbclk: ehrpwm2_tbclk@664 {
+	ehrpwm2_tbclk: clock-ehrpwm2-tbclk-2@664 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "ehrpwm2_tbclk";
 		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <2>;
 		reg = <0x0664>;
 	};
 
-	ehrpwm3_tbclk: ehrpwm3_tbclk@664 {
+	ehrpwm3_tbclk: clock-ehrpwm3-tbclk-4@664 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "ehrpwm3_tbclk";
 		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <4>;
 		reg = <0x0664>;
 	};
 
-	ehrpwm4_tbclk: ehrpwm4_tbclk@664 {
+	ehrpwm4_tbclk: clock-ehrpwm4-tbclk-5@664 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "ehrpwm4_tbclk";
 		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <5>;
 		reg = <0x0664>;
 	};
 
-	ehrpwm5_tbclk: ehrpwm5_tbclk@664 {
+	ehrpwm5_tbclk: clock-ehrpwm5-tbclk-6@664 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "ehrpwm5_tbclk";
 		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <6>;
 		reg = <0x0664>;
 	};
 };
 &prcm_clocks {
-	clk_32768_ck: clk_32768_ck {
+	clk_32768_ck: clock-clk-32768 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "clk_32768_ck";
 		clock-frequency = <32768>;
 	};
 
-	clk_rc32k_ck: clk_rc32k_ck {
+	clk_rc32k_ck: clock-clk-rc32k {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "clk_rc32k_ck";
 		clock-frequency = <32768>;
 	};
 
-	virt_19200000_ck: virt_19200000_ck {
+	virt_19200000_ck: clock-virt-19200000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_19200000_ck";
 		clock-frequency = <19200000>;
 	};
 
-	virt_24000000_ck: virt_24000000_ck {
+	virt_24000000_ck: clock-virt-24000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_24000000_ck";
 		clock-frequency = <24000000>;
 	};
 
-	virt_25000000_ck: virt_25000000_ck {
+	virt_25000000_ck: clock-virt-25000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_25000000_ck";
 		clock-frequency = <25000000>;
 	};
 
-	virt_26000000_ck: virt_26000000_ck {
+	virt_26000000_ck: clock-virt-26000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_26000000_ck";
 		clock-frequency = <26000000>;
 	};
 
-	tclkin_ck: tclkin_ck {
+	tclkin_ck: clock-tclkin {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "tclkin_ck";
 		clock-frequency = <26000000>;
 	};
 
-	dpll_core_ck: dpll_core_ck@2d20 {
+	dpll_core_ck: clock@2d20 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-core-clock";
+		clock-output-names = "dpll_core_ck";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
 		reg = <0x2d20>, <0x2d24>, <0x2d2c>, <0x2d48>, <0x2d4c>;
 	};
 
-	dpll_core_x2_ck: dpll_core_x2_ck {
+	dpll_core_x2_ck: clock-dpll-core-x2 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-x2-clock";
+		clock-output-names = "dpll_core_x2_ck";
 		clocks = <&dpll_core_ck>;
 	};
 
-	dpll_core_m4_ck: dpll_core_m4_ck@2d38 {
+	dpll_core_m4_ck: clock-dpll-core-m4-8@2d38 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_m4_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -224,9 +253,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_core_m5_ck: dpll_core_m5_ck@2d3c {
+	dpll_core_m5_ck: clock-dpll-core-m5-8@2d3c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_m5_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -235,9 +265,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_core_m6_ck: dpll_core_m6_ck@2d40 {
+	dpll_core_m6_ck: clock-dpll-core-m6-8@2d40 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_m6_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -246,16 +277,18 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_mpu_ck: dpll_mpu_ck@2d60 {
+	dpll_mpu_ck: clock@2d60 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-clock";
+		clock-output-names = "dpll_mpu_ck";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
 		reg = <0x2d60>, <0x2d64>, <0x2d6c>, <0x2d88>, <0x2d8c>;
 	};
 
-	dpll_mpu_m2_ck: dpll_mpu_m2_ck@2d70 {
+	dpll_mpu_m2_ck: clock-dpll-mpu-m2-8@2d70 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_mpu_m2_ck";
 		clocks = <&dpll_mpu_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -264,24 +297,27 @@
 		ti,invert-autoidle-bit;
 	};
 
-	mpu_periphclk: mpu_periphclk {
+	mpu_periphclk: clock-mpu-periphclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "mpu_periphclk";
 		clocks = <&dpll_mpu_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	dpll_ddr_ck: dpll_ddr_ck@2da0 {
+	dpll_ddr_ck: clock@2da0 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-clock";
+		clock-output-names = "dpll_ddr_ck";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
 		reg = <0x2da0>, <0x2da4>, <0x2dac>, <0x2dc8>, <0x2dcc>;
 	};
 
-	dpll_ddr_m2_ck: dpll_ddr_m2_ck@2db0 {
+	dpll_ddr_m2_ck: clock-dpll-ddr-m2-8@2db0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_ddr_m2_ck";
 		clocks = <&dpll_ddr_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -290,16 +326,18 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_disp_ck: dpll_disp_ck@2e20 {
+	dpll_disp_ck: clock@2e20 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-clock";
+		clock-output-names = "dpll_disp_ck";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
 		reg = <0x2e20>, <0x2e24>, <0x2e2c>, <0x2e48>, <0x2e4c>;
 	};
 
-	dpll_disp_m2_ck: dpll_disp_m2_ck@2e30 {
+	dpll_disp_m2_ck: clock-dpll-disp-m2-8@2e30 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_disp_m2_ck";
 		clocks = <&dpll_disp_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -309,16 +347,18 @@
 		ti,set-rate-parent;
 	};
 
-	dpll_per_ck: dpll_per_ck@2de0 {
+	dpll_per_ck: clock@2de0 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-j-type-clock";
+		clock-output-names = "dpll_per_ck";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
 		reg = <0x2de0>, <0x2de4>, <0x2dec>, <0x2e08>, <0x2e0c>;
 	};
 
-	dpll_per_m2_ck: dpll_per_m2_ck@2df0 {
+	dpll_per_m2_ck: clock-dpll-per-m2-8@2df0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_m2_ck";
 		clocks = <&dpll_per_ck>;
 		ti,max-div = <127>;
 		ti,autoidle-shift = <8>;
@@ -327,119 +367,135 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck {
+	dpll_per_m2_div4_wkupdm_ck: clock-dpll-per-m2-div4-wkupdm {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dpll_per_m2_div4_wkupdm_ck";
 		clocks = <&dpll_per_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <4>;
 	};
 
-	dpll_per_m2_div4_ck: dpll_per_m2_div4_ck {
+	dpll_per_m2_div4_ck: clock-dpll-per-m2-div4 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dpll_per_m2_div4_ck";
 		clocks = <&dpll_per_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <4>;
 	};
 
-	clk_24mhz: clk_24mhz {
+	clk_24mhz: clock-clk-24mhz {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "clk_24mhz";
 		clocks = <&dpll_per_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <8>;
 	};
 
-	clkdiv32k_ck: clkdiv32k_ck {
+	clkdiv32k_ck: clock-clkdiv32k {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "clkdiv32k_ck";
 		clocks = <&clk_24mhz>;
 		clock-mult = <1>;
 		clock-div = <732>;
 	};
 
-	clkdiv32k_ick: clkdiv32k_ick@2a38 {
+	clkdiv32k_ick: clock-clkdiv32k-ick-8@2a38 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "clkdiv32k_ick";
 		clocks = <&clkdiv32k_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x2a38>;
 	};
 
-	sysclk_div: sysclk_div {
+	sysclk_div: clock-sysclk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "sysclk_div";
 		clocks = <&dpll_core_m4_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	pruss_ocp_gclk: pruss_ocp_gclk@4248 {
+	pruss_ocp_gclk: clock-pruss-ocp-gclk@4248 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "pruss_ocp_gclk";
 		clocks = <&sysclk_div>, <&dpll_disp_m2_ck>;
 		reg = <0x4248>;
 	};
 
-	clk_32k_tpm_ck: clk_32k_tpm_ck {
+	clk_32k_tpm_ck: clock-clk-32k-tpm {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "clk_32k_tpm_ck";
 		clock-frequency = <32768>;
 	};
 
-	timer1_fck: timer1_fck@4200 {
+	timer1_fck: clock-timer1-fck@4200 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer1_fck";
 		clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_32k_tpm_ck>;
 		reg = <0x4200>;
 	};
 
-	timer2_fck: timer2_fck@4204 {
+	timer2_fck: clock-timer2-fck@4204 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer2_fck";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
 		reg = <0x4204>;
 	};
 
-	timer3_fck: timer3_fck@4208 {
+	timer3_fck: clock-timer3-fck@4208 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer3_fck";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
 		reg = <0x4208>;
 	};
 
-	timer4_fck: timer4_fck@420c {
+	timer4_fck: clock-timer4-fck@420c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer4_fck";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
 		reg = <0x420c>;
 	};
 
-	timer5_fck: timer5_fck@4210 {
+	timer5_fck: clock-timer5-fck@4210 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer5_fck";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
 		reg = <0x4210>;
 	};
 
-	timer6_fck: timer6_fck@4214 {
+	timer6_fck: clock-timer6-fck@4214 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer6_fck";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
 		reg = <0x4214>;
 	};
 
-	timer7_fck: timer7_fck@4218 {
+	timer7_fck: clock-timer7-fck@4218 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer7_fck";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
 		reg = <0x4218>;
 	};
 
-	wdt1_fck: wdt1_fck@422c {
+	wdt1_fck: clock-wdt1-fck@422c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "wdt1_fck";
 		clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>;
 		reg = <0x422c>;
 	};
@@ -451,125 +507,141 @@
 		reg = <0x424c>;
 	};
 
-	l3_gclk: l3_gclk {
+	l3_gclk: clock-l3-gclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "l3_gclk";
 		clocks = <&dpll_core_m4_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dpll_core_m4_div2_ck: dpll_core_m4_div2_ck {
+	dpll_core_m4_div2_ck: clock-dpll-core-m4-div2 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dpll_core_m4_div2_ck";
 		clocks = <&sysclk_div>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	l4hs_gclk: l4hs_gclk {
+	l4hs_gclk: clock-l4hs-gclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "l4hs_gclk";
 		clocks = <&dpll_core_m4_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	l3s_gclk: l3s_gclk {
+	l3s_gclk: clock-l3s-gclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "l3s_gclk";
 		clocks = <&dpll_core_m4_div2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	l4ls_gclk: l4ls_gclk {
+	l4ls_gclk: clock-l4ls-gclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "l4ls_gclk";
 		clocks = <&dpll_core_m4_div2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	cpsw_125mhz_gclk: cpsw_125mhz_gclk {
+	cpsw_125mhz_gclk: clock-cpsw-125mhz-gclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "cpsw_125mhz_gclk";
 		clocks = <&dpll_core_m5_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk@4238 {
+	cpsw_cpts_rft_clk: clock-cpsw-cpts-rft@4238 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "cpsw_cpts_rft_clk";
 		clocks = <&sysclk_div>, <&dpll_core_m5_ck>, <&dpll_disp_m2_ck>;
 		reg = <0x4238>;
 	};
 
-	dpll_clksel_mac_clk: dpll_clksel_mac_clk@4234 {
+	dpll_clksel_mac_clk: clock-dpll-clksel-mac-2@4234 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_clksel_mac_clk";
 		clocks = <&dpll_core_m5_ck>;
 		reg = <0x4234>;
 		ti,bit-shift = <2>;
 		ti,dividers = <2>, <5>;
 	};
 
-	clk_32k_mosc_ck: clk_32k_mosc_ck {
+	clk_32k_mosc_ck: clock-clk-32k-mosc {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "clk_32k_mosc_ck";
 		clock-frequency = <32768>;
 	};
 
-	gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck@4240 {
+	gpio0_dbclk_mux_ck: clock-gpio0-dbclk-mux@4240 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "gpio0_dbclk_mux_ck";
 		clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>, <&clk_32k_mosc_ck>, <&clk_32k_tpm_ck>;
 		reg = <0x4240>;
 	};
 
-	mmc_clk: mmc_clk {
+	mmc_clk: clock-mmc {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "mmc_clk";
 		clocks = <&dpll_per_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	gfx_fclk_clksel_ck: gfx_fclk_clksel_ck@423c {
+	gfx_fclk_clksel_ck: clock-gfx-fclk-clksel-1@423c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "gfx_fclk_clksel_ck";
 		clocks = <&sysclk_div>, <&dpll_per_m2_ck>;
 		ti,bit-shift = <1>;
 		reg = <0x423c>;
 	};
 
-	gfx_fck_div_ck: gfx_fck_div_ck@423c {
+	gfx_fck_div_ck: clock-gfx-fck-div@423c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "gfx_fck_div_ck";
 		clocks = <&gfx_fclk_clksel_ck>;
 		reg = <0x423c>;
 		ti,max-div = <2>;
 	};
 
-	disp_clk: disp_clk@4244 {
+	disp_clk: clock-disp@4244 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "disp_clk";
 		clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
 		reg = <0x4244>;
 		ti,set-rate-parent;
 	};
 
-	dpll_extdev_ck: dpll_extdev_ck@2e60 {
+	dpll_extdev_ck: clock@2e60 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-clock";
+		clock-output-names = "dpll_extdev_ck";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
 		reg = <0x2e60>, <0x2e64>, <0x2e6c>, <0x2e88>, <0x2e8c>;
 	};
 
-	dpll_extdev_m2_ck: dpll_extdev_m2_ck@2e70 {
+	dpll_extdev_m2_ck: clock-dpll-extdev-m2-8@2e70 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_extdev_m2_ck";
 		clocks = <&dpll_extdev_ck>;
 		ti,max-div = <127>;
 		ti,autoidle-shift = <8>;
@@ -578,66 +650,75 @@
 		ti,invert-autoidle-bit;
 	};
 
-	mux_synctimer32k_ck: mux_synctimer32k_ck@4230 {
+	mux_synctimer32k_ck: clock-mux-synctimer32k@4230 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "mux_synctimer32k_ck";
 		clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>, <&clkdiv32k_ick>;
 		reg = <0x4230>;
 	};
 
-	timer8_fck: timer8_fck@421c {
+	timer8_fck: clock-timer8-fck@421c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer8_fck";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
 		reg = <0x421c>;
 	};
 
-	timer9_fck: timer9_fck@4220 {
+	timer9_fck: clock-timer9-fck@4220 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer9_fck";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
 		reg = <0x4220>;
 	};
 
-	timer10_fck: timer10_fck@4224 {
+	timer10_fck: clock-timer10-fck@4224 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer10_fck";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
 		reg = <0x4224>;
 	};
 
-	timer11_fck: timer11_fck@4228 {
+	timer11_fck: clock-timer11-fck@4228 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer11_fck";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
 		reg = <0x4228>;
 	};
 
-	cpsw_50m_clkdiv: cpsw_50m_clkdiv {
+	cpsw_50m_clkdiv: clock-cpsw-50m-clkdiv {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "cpsw_50m_clkdiv";
 		clocks = <&dpll_core_m5_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	cpsw_5m_clkdiv: cpsw_5m_clkdiv {
+	cpsw_5m_clkdiv: clock-cpsw-5m-clkdiv {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "cpsw_5m_clkdiv";
 		clocks = <&cpsw_50m_clkdiv>;
 		clock-mult = <1>;
 		clock-div = <10>;
 	};
 
-	dpll_ddr_x2_ck: dpll_ddr_x2_ck {
+	dpll_ddr_x2_ck: clock-dpll-ddr-x2 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-x2-clock";
+		clock-output-names = "dpll_ddr_x2_ck";
 		clocks = <&dpll_ddr_ck>;
 	};
 
-	dpll_ddr_m4_ck: dpll_ddr_m4_ck@2db8 {
+	dpll_ddr_m4_ck: clock-dpll-ddr-m4-8@2db8 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_ddr_m4_ck";
 		clocks = <&dpll_ddr_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -646,9 +727,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_per_clkdcoldo: dpll_per_clkdcoldo@2e14 {
+	dpll_per_clkdcoldo: clock-dpll-per-clkdcoldo-8@2e14 {
 		#clock-cells = <0>;
 		compatible = "ti,fixed-factor-clock";
+		clock-output-names = "dpll_per_clkdcoldo";
 		clocks = <&dpll_per_ck>;
 		ti,clock-mult = <1>;
 		ti,clock-div = <1>;
@@ -657,91 +739,102 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dll_aging_clk_div: dll_aging_clk_div@4250 {
+	dll_aging_clk_div: clock-dll-aging-clk-div@4250 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dll_aging_clk_div";
 		clocks = <&sys_clkin_ck>;
 		reg = <0x4250>;
 		ti,dividers = <8>, <16>, <32>;
 	};
 
-	div_core_25m_ck: div_core_25m_ck {
+	div_core_25m_ck: clock-div-core-25m {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "div_core_25m_ck";
 		clocks = <&sysclk_div>;
 		clock-mult = <1>;
 		clock-div = <8>;
 	};
 
-	func_12m_clk: func_12m_clk {
+	func_12m_clk: clock-func-12m {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "func_12m_clk";
 		clocks = <&dpll_per_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <16>;
 	};
 
-	vtp_clk_div: vtp_clk_div {
+	vtp_clk_div: clock-vtp-clk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "vtp_clk_div";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	usbphy_32khz_clkmux: usbphy_32khz_clkmux@4260 {
+	usbphy_32khz_clkmux: clock-usbphy-32khz-clkmux@4260 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "usbphy_32khz_clkmux";
 		clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>;
 		reg = <0x4260>;
 	};
 
-	usb_phy0_always_on_clk32k: usb_phy0_always_on_clk32k@2a40 {
+	usb_phy0_always_on_clk32k: clock-usb-phy0-always-on-clk32k-8@2a40 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "usb_phy0_always_on_clk32k";
 		clocks = <&usbphy_32khz_clkmux>;
 		ti,bit-shift = <8>;
 		reg = <0x2a40>;
 	};
 
-	usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k@2a48 {
+	usb_phy1_always_on_clk32k: clock-usb-phy1-always-on-clk32k-8@2a48 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "usb_phy1_always_on_clk32k";
 		clocks = <&usbphy_32khz_clkmux>;
 		ti,bit-shift = <8>;
 		reg = <0x2a48>;
 	};
 
-	clkout1_osc_div_ck: clkout1-osc-div-ck {
+	clkout1_osc_div_ck: clock-clkout1-osc-div-ck {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "clkout1_osc_div_ck";
 		clocks = <&sys_clkin_ck>;
 		ti,bit-shift = <20>;
 		ti,max-div = <4>;
 		reg = <0x4100>;
 	};
 
-	clkout1_src2_mux_ck: clkout1-src2-mux-ck {
+	clkout1_src2_mux_ck: clock-clkout1-src2-mux-ck {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "clkout1_src2_mux_ck";
 		clocks = <&clk_rc32k_ck>, <&sysclk_div>, <&dpll_ddr_m2_ck>,
 			 <&dpll_per_m2_ck>, <&dpll_disp_m2_ck>,
 			 <&dpll_mpu_m2_ck>;
 		reg = <0x4100>;
 	};
 
-	clkout1_src2_pre_div_ck: clkout1-src2-pre-div-ck {
+	clkout1_src2_pre_div_ck: clock-clkout1-src2-pre-div-ck {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "clkout1_src2_pre_div_ck";
 		clocks = <&clkout1_src2_mux_ck>;
 		ti,bit-shift = <4>;
 		ti,max-div = <8>;
 		reg = <0x4100>;
 	};
 
-	clkout1_src2_post_div_ck: clkout1-src2-post-div-ck {
+	clkout1_src2_post_div_ck: clock-clkout1-src2-post-div-ck {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "clkout1_src2_post_div_ck";
 		clocks = <&clkout1_src2_pre_div_ck>;
 		ti,bit-shift = <8>;
 		ti,max-div = <32>;
@@ -749,18 +842,20 @@
 		reg = <0x4100>;
 	};
 
-	clkout1_mux_ck: clkout1-mux-ck {
+	clkout1_mux_ck: clock-clkout1-mux-ck {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "clkout1_mux_ck";
 		clocks = <&clkout1_osc_div_ck>, <&clk_rc32k_ck>,
 			 <&clkout1_src2_post_div_ck>, <&dpll_extdev_m2_ck>;
 		ti,bit-shift = <16>;
 		reg = <0x4100>;
 	};
 
-	clkout1_ck: clkout1-ck {
+	clkout1_ck: clock-clkout1-ck {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "clkout1_ck";
 		clocks = <&clkout1_mux_ck>;
 		ti,bit-shift = <23>;
 		reg = <0x4100>;
@@ -768,120 +863,138 @@
 };
 
 &prcm {
-	wkup_cm: wkup-cm@2800 {
+	wkup_cm: clock@2800 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "wkup_cm";
 		reg = <0x2800 0x400>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x2800 0x400>;
 
-		l3s_tsc_clkctrl: l3s-tsc-clkctrl@120 {
+		l3s_tsc_clkctrl: clock@120 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3s_tsc_clkctrl";
 			reg = <0x120 0x4>;
 			#clock-cells = <2>;
 		};
 
-		l4_wkup_aon_clkctrl: l4-wkup-aon-clkctrl@228 {
+		l4_wkup_aon_clkctrl: clock@228 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l4_wkup_aon_clkctrl";
 			reg = <0x228 0xc>;
 			#clock-cells = <2>;
 		};
 
-		l4_wkup_clkctrl: l4-wkup-clkctrl@220 {
+		l4_wkup_clkctrl: clock@220 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l4_wkup_clkctrl";
 			reg = <0x220 0x4>, <0x328 0x44>;
 			#clock-cells = <2>;
 		};
 
 	};
 
-	mpu_cm: mpu-cm@8300 {
+	mpu_cm: clock@8300 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "mpu_cm";
 		reg = <0x8300 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x8300 0x100>;
 
-		mpu_clkctrl: mpu-clkctrl@20 {
+		mpu_clkctrl: clock@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "mpu_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
 	};
 
-	gfx_l3_cm: gfx-l3-cm@8400 {
+	gfx_l3_cm: clock@8400 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "gfx_l3_cm";
 		reg = <0x8400 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x8400 0x100>;
 
-		gfx_l3_clkctrl: gfx-l3-clkctrl@20 {
+		gfx_l3_clkctrl: clock@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "gfx_l3_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
 	};
 
-	l4_rtc_cm: l4-rtc-cm@8500 {
+	l4_rtc_cm: clock@8500 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l4_rtc_cm";
 		reg = <0x8500 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x8500 0x100>;
 
-		l4_rtc_clkctrl: l4-rtc-clkctrl@20 {
+		l4_rtc_clkctrl: clock@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l4_rtc_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
 	};
 
-	per_cm: per-cm@8800 {
+	per_cm: clock@8800 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "per_cm";
 		reg = <0x8800 0xc00>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x8800 0xc00>;
 
-		l3_clkctrl: l3-clkctrl@20 {
+		l3_clkctrl: clock@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3_clkctrl";
 			reg = <0x20 0x3c>, <0x78 0x2c>;
 			#clock-cells = <2>;
 		};
 
-		l3s_clkctrl: l3s-clkctrl@68 {
+		l3s_clkctrl: clock@68 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3s_clkctrl";
 			reg = <0x68 0xc>, <0x220 0x4c>;
 			#clock-cells = <2>;
 		};
 
-		pruss_ocp_clkctrl: pruss-ocp-clkctrl@320 {
+		pruss_ocp_clkctrl: clock@320 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "pruss_ocp_clkctrl";
 			reg = <0x320 0x4>;
 			#clock-cells = <2>;
 		};
 
-		l4ls_clkctrl: l4ls-clkctrl@420 {
+		l4ls_clkctrl: clock@420 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l4ls_clkctrl";
 			reg = <0x420 0x1a4>;
 			#clock-cells = <2>;
 		};
 
-		emif_clkctrl: emif-clkctrl@720 {
+		emif_clkctrl: clock@720 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "emif_clkctrl";
 			reg = <0x720 0x4>;
 			#clock-cells = <2>;
 		};
 
-		dss_clkctrl: dss-clkctrl@a20 {
+		dss_clkctrl: clock@a20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "dss_clkctrl";
 			reg = <0xa20 0x4>;
 			#clock-cells = <2>;
 		};
 
-		cpsw_125mhz_clkctrl: cpsw-125mhz-clkctrl@b20 {
+		cpsw_125mhz_clkctrl: clock@b20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "cpsw_125mhz_clkctrl";
 			reg = <0xb20 0x4>;
 			#clock-cells = <2>;
 		};
diff --git a/arch/arm/boot/dts/am5748.dtsi b/arch/arm/boot/dts/am5748.dtsi
index c260aa1a85bd..a1f029e9d1f3 100644
--- a/arch/arm/boot/dts/am5748.dtsi
+++ b/arch/arm/boot/dts/am5748.dtsi
@@ -25,6 +25,10 @@
 	status = "disabled";
 };
 
+&usb4_tm {
+	status = "disabled";
+};
+
 &atl_tm {
 	status = "disabled";
 };
diff --git a/arch/arm/boot/dts/am574x-idk.dts b/arch/arm/boot/dts/am574x-idk.dts
index 6dff3660bf09..47b9174d2353 100644
--- a/arch/arm/boot/dts/am574x-idk.dts
+++ b/arch/arm/boot/dts/am574x-idk.dts
@@ -18,7 +18,7 @@
 
 &qspi {
 	spi-max-frequency = <96000000>;
-	m25p80@0 {
+	flash@0 {
 		spi-max-frequency = <96000000>;
 	};
 };
diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
index 2e94f32d9dfc..2fc9a5d5e0c0 100644
--- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
+++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@@ -491,7 +491,7 @@
 
 	spi-max-frequency = <48000000>;
 
-	spi_flash: spi_flash@0 {
+	spi_flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "spansion,m25p80", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
index 9fcb8944aa3e..c06eda817242 100644
--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -526,7 +526,7 @@
 	status = "okay";
 
 	spi-max-frequency = <76800000>;
-	m25p80@0 {
+	flash@0 {
 		compatible = "s25fl256s1", "jedec,spi-nor";
 		spi-max-frequency = <76800000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts
index 7da718abbd85..29936bfbeeb7 100644
--- a/arch/arm/boot/dts/animeo_ip.dts
+++ b/arch/arm/boot/dts/animeo_ip.dts
@@ -168,26 +168,24 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		keyswitch_in {
+		key-switch-in {
 			label = "keyswitch_in";
 			gpios = <&pioB 1 GPIO_ACTIVE_HIGH>;
 			linux,code = <28>;
 			wakeup-source;
 		};
 
-		error_in {
+		key-error-in {
 			label = "error_in";
 			gpios = <&pioB 2 GPIO_ACTIVE_HIGH>;
 			linux,code = <29>;
 			wakeup-source;
 		};
 
-		btn {
+		key-s {
 			label = "btn";
 			gpios = <&pioC 23 GPIO_ACTIVE_HIGH>;
 			linux,code = <31>;
diff --git a/arch/arm/boot/dts/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm-realview-eb.dtsi
index 2dfb32bf9d48..fbb2258b451f 100644
--- a/arch/arm/boot/dts/arm-realview-eb.dtsi
+++ b/arch/arm/boot/dts/arm-realview-eb.dtsi
@@ -399,7 +399,7 @@
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x1000d000 0x1000>;
 			clocks = <&sspclk>, <&pclk>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 		};
 
 		wdog: watchdog@10010000 {
diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts
index 06b8723b09eb..efed325af88d 100644
--- a/arch/arm/boot/dts/arm-realview-pb1176.dts
+++ b/arch/arm/boot/dts/arm-realview-pb1176.dts
@@ -410,7 +410,7 @@
 			interrupt-parent = <&intc_dc1176>;
 			interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&sspclk>, <&pclk>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 		};
 
 		pb1176_serial0: serial@1010c000 {
diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm-realview-pb11mp.dts
index 295aef448123..89103d54ecc1 100644
--- a/arch/arm/boot/dts/arm-realview-pb11mp.dts
+++ b/arch/arm/boot/dts/arm-realview-pb11mp.dts
@@ -555,7 +555,7 @@
 			interrupt-parent = <&intc_pb11mp>;
 			interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&sspclk>, <&pclk>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 		};
 
 		watchdog@1000f000 {
diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm-realview-pbx.dtsi
index 6f61f968d689..ec1507c5147c 100644
--- a/arch/arm/boot/dts/arm-realview-pbx.dtsi
+++ b/arch/arm/boot/dts/arm-realview-pbx.dtsi
@@ -390,7 +390,7 @@
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x1000d000 0x1000>;
 			clocks = <&sspclk>, <&pclk>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 		};
 
 		wdog0: watchdog@1000f000 {
diff --git a/arch/arm/boot/dts/armada-370-c200-v2.dts b/arch/arm/boot/dts/armada-370-c200-v2.dts
new file mode 100644
index 000000000000..84d40e1d70ef
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-c200-v2.dts
@@ -0,0 +1,388 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Device Tree file for Ctera C200-V2
+ *
+ * Copyright (C) 2022 Pawel Dembicki <paweldembicki@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "armada-370.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Ctera C200 V2";
+	compatible = "ctera,c200-v2", "marvell,armada370", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1024 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
+	};
+
+	thermal-zones {
+		ethphy-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <2000>;
+
+			thermal-sensors = <&ethphy0>;
+
+			trips {
+				ethphy_alert1: trip1 {
+					temperature = <65000>;
+					hysteresis = <4000>;
+					type = "passive";
+				};
+
+				ethphy_crit: trip2 {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	beeper {
+		compatible = "pwm-beeper";
+		pinctrl-0 = <&pmx_beeper>;
+		pinctrl-names = "default";
+		pwms = <&gpio1 31 4000>;
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_buttons>;
+		pinctrl-names = "default";
+
+		button-power {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		button-reset {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+		};
+
+		button-usb1 {
+			label = "USB1 Button";
+			linux,code = <BTN_0>;
+			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+		};
+
+		button-usb2 {
+			label = "USB2 Button";
+			linux,code = <BTN_1>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_leds1 &pmx_leds2>;
+		pinctrl-names = "default";
+
+		led-0 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+		};
+
+		led-3 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+		};
+
+		led-4 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
+		};
+
+		led-6 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+		};
+
+		led-7 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-8 {
+			function = LED_FUNCTION_DISK_ERR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+		};
+
+		led-9 {
+			function = LED_FUNCTION_DISK_ERR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+		};
+
+		led-10 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+		};
+
+		led-11 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+		};
+
+		led-12 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&coherencyfab {
+	broken-idle;
+};
+
+&eth1 {
+	pinctrl-0 = <&ge1_rgmii_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	phy-handle = <&ethphy0>;
+	phy-connection-type = "rgmii-id";
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	clock-frequency = <100000>;
+	status = "okay";
+
+	hwmon@2a {
+		compatible = "nuvoton,nct7802";
+		reg = <0x2a>;
+	};
+
+	rtc@30 {
+		compatible = "sii,s35390a";
+		reg = <0x30>;
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+
+	ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		reg = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x0000000 0x200000>;
+				read-only;
+			};
+
+			partition@200000 {
+				label = "certificate";
+				reg = <0x0200000 0x100000>;
+				read-only;
+			};
+
+			partition@300000 {
+				label = "preset_cfg";
+				reg = <0x0300000 0x100000>;
+				read-only;
+			};
+
+			partition@400000 {
+				label = "dev_params";
+				reg = <0x0400000 0x100000>;
+				read-only;
+			};
+			partition@500000 {
+				label = "active_bank";
+				reg = <0x0500000 0x0100000>;
+			};
+
+			partition@600000 {
+				label = "magic";
+				reg = <0x0600000 0x0100000>;
+				read-only;
+			};
+
+			partition@700000 {
+				label = "bank1";
+				reg = <0x0700000 0x2800000>;
+			};
+
+			partition@2f00000 {
+				label = "bank2";
+				reg = <0x2f00000 0x2800000>;
+			};
+
+			/* 0x5700000-0x5a00000 undefined in vendor firmware */
+
+			partition@5a00000 {
+				label = "reserved";
+				reg = <0x5a00000 0x2000000>;
+			};
+
+			partition@7a00000 {
+				label = "rootfs";
+				reg = <0x7a00000 0x8600000>;
+			};
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	pcie@1,0 { /* Renesas uPD720202 USB 3.0 controller */
+		pinctrl-0 = <&pmx_pcie>;
+		pinctrl-names = "default";
+		status = "okay";
+		reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	pmx_poweroff: pmx-poweroff {
+		marvell,pins = "mpp7";
+		marvell,function = "gpo";
+	};
+
+	pmx_power_cpu: pmx-power-cpu {
+		marvell,pins = "mpp4";
+		marvell,function = "vdd";
+	};
+
+	pmx_buttons: pmx-buttons {
+		marvell,pins = "mpp6", "mpp10", "mpp14", "mpp32";
+		marvell,function = "gpio";
+	};
+
+	pmx_leds1: pmx-leds1 {
+		marvell,pins = "mpp47";
+		marvell,function = "gpo";
+	};
+
+	pmx_leds2: pmx-leds2 {
+		marvell,pins = "mpp12", "mpp13", "mpp15", "mpp16", "mpp50", "mpp51",
+			       "mpp52", "mpp53", "mpp55", "mpp56", "mpp57", "mpp58";
+		marvell,function = "gpio";
+	};
+
+	pmx_pcie: pmx-pcie {
+		marvell,pins = "mpp59";
+		marvell,function = "gpio";
+	};
+
+	pmx_beeper: pmx-beeper {
+		marvell,pins = "mpp63";
+		marvell,function = "gpio";
+	};
+};
+
+&pmsu {
+	pinctrl-0 = <&pmx_power_cpu>;
+	pinctrl-names = "default";
+};
+
+&rtc {
+	status = "disabled";
+};
+
+&sata {
+	nr-ports = <2>;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hdd0_temp: sata-port@0 {
+		reg = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	hdd1_temp: sata-port@1 {
+		reg = <1>;
+		#thermal-sensor-cells = <0>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index 77261a2fb949..a7dc4c04d10b 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -203,7 +203,7 @@
 	pinctrl-names = "default";
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "mx25l25635e", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index c910d157a686..6ba7699b69ed 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -84,8 +84,6 @@
 
 			gpio-keys {
 				compatible = "gpio-keys";
-				#address-cells = <1>;
-				#size-cells = <0>;
 				button {
 					label = "Software Button";
 					linux,code = <KEY_POWER>;
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
index b52634ecf1d9..866b8630d407 100644
--- a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
+++ b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
@@ -108,22 +108,20 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		power {
+		button-power {
 			label = "Power button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
 			debounce-interval = <100>;
 		};
-		backup {
+		button-backup {
 			label = "Backup button";
 			linux,code = <KEY_OPTION>;
 			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
 			debounce-interval = <100>;
 		};
-		reset {
+		button-reset {
 			label = "Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
index a624b2371fb6..702a85af2078 100644
--- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
+++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
@@ -83,22 +83,20 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		power {
+		button-power {
 			label = "Power button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
 			debounce-interval = <100>;
 		};
-		reset {
+		button-reset {
 			label = "Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
 			debounce-interval = <100>;
 		};
-		button {
+		button-usb {
 			label = "USB VBUS error";
 			linux,code = <KEY_UNKNOWN>;
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
@@ -159,7 +157,7 @@
 	pinctrl-0 = <&spi0_pins2>;
 	pinctrl-names = "default";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		/* MX25L8006E */
diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
index 64f2ce254fb6..e72b8ed4b997 100644
--- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts
+++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
@@ -258,7 +258,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "micron,n25q064", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 46e6d3ed8f35..9dc928859ad3 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -60,16 +60,26 @@
 				reg = <0x0800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 58>;
 				#interrupt-cells = <1>;
                                 ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
                                           0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+						<0 0 0 2 &pcie0_intc 1>,
+						<0 0 0 3 &pcie0_intc 2>,
+						<0 0 0 4 &pcie0_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 5>;
 				status = "disabled";
+
+				pcie0_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie2: pcie@2,0 {
@@ -78,16 +88,26 @@
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 62>;
 				#interrupt-cells = <1>;
                                 ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
                                           0x81000000 0 0 0x81000000 0x2 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 62>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 9>;
 				status = "disabled";
+
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 
diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts
index 0e679465cbb5..4c4092790a20 100644
--- a/arch/arm/boot/dts/armada-375-db.dts
+++ b/arch/arm/boot/dts/armada-375-db.dts
@@ -64,7 +64,7 @@
 
 	status = "disabled";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "n25q128a13", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
index 7f2f24a29e6c..929deaf312a5 100644
--- a/arch/arm/boot/dts/armada-375.dtsi
+++ b/arch/arm/boot/dts/armada-375.dtsi
@@ -568,16 +568,26 @@
 				reg = <0x0800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+						<0 0 0 2 &pcie0_intc 1>,
+						<0 0 0 3 &pcie0_intc 2>,
+						<0 0 0 4 &pcie0_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 5>;
 				status = "disabled";
+
+				pcie0_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie1: pcie@2,0 {
@@ -586,16 +596,26 @@
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <1>;
 				clocks = <&gateclk 6>;
 				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 		};
diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi
index cff1269f3fbf..ce1dddb2269b 100644
--- a/arch/arm/boot/dts/armada-380.dtsi
+++ b/arch/arm/boot/dts/armada-380.dtsi
@@ -64,16 +64,26 @@
 				reg = <0x0800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 8>;
 				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			/* x1 port */
@@ -83,16 +93,26 @@
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 5>;
 				status = "disabled";
+
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			/* x1 port */
@@ -102,16 +122,26 @@
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
 					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+						<0 0 0 2 &pcie3_intc 1>,
+						<0 0 0 3 &pcie3_intc 2>,
+						<0 0 0 4 &pcie3_intc 3>;
 				marvell,pcie-port = <2>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 6>;
 				status = "disabled";
+
+				pcie3_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts b/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts
index 0a961116a1f9..095df5567c93 100644
--- a/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts
+++ b/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts
@@ -24,7 +24,7 @@
 		pinctrl-0 = <&front_button_pins>;
 		pinctrl-names = "default";
 
-		factory_default {
+		key-factory-default {
 			label = "Factory Default";
 			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_RESTART>;
@@ -242,7 +242,7 @@
 	pinctrl-names = "default";
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-385-atl-x530.dts b/arch/arm/boot/dts/armada-385-atl-x530.dts
index ed3f41c7df71..241f5d7c80e9 100644
--- a/arch/arm/boot/dts/armada-385-atl-x530.dts
+++ b/arch/arm/boot/dts/armada-385-atl-x530.dts
@@ -168,7 +168,7 @@
 	pinctrl-0 = <&spi1_pins>;
 	status = "okay";
 
-	spi-flash@1 {
+	flash@1 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi b/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi
index 624bbcae68c0..d1452a04e904 100644
--- a/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi
+++ b/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi
@@ -256,14 +256,14 @@
 		pinctrl-0 = <&cf_gtr_rear_button_pins &cf_gtr_front_button_pins>;
 		pinctrl-names = "default";
 
-		button_0 {
+		button-0 {
 			label = "Rear Button";
 			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 			linux,can-disable;
 			linux,code = <BTN_0>;
 		};
 
-		button_1 {
+		button-1 {
 			label = "Front Button";
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
 			linux,can-disable;
@@ -365,7 +365,7 @@
 	pinctrl-names = "default";
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "w25q32", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts b/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts
index 7881df3b28a0..389d9c75d546 100644
--- a/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts
+++ b/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts
@@ -126,7 +126,7 @@
 	pinctrl-0 = <&spi1_pins>;
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts
index 0e4613bb56ee..332f8fce77dc 100644
--- a/arch/arm/boot/dts/armada-385-db-ap.dts
+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
@@ -192,7 +192,7 @@
 	pinctrl-0 = <&spi1_pins>;
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "st,m25p128", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi
index fb9c8a0b241c..116aca5e688f 100644
--- a/arch/arm/boot/dts/armada-385-linksys.dtsi
+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
@@ -53,13 +53,13 @@
 		pinctrl-0 = <&gpio_keys_pins>;
 		pinctrl-names = "default";
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
 		};
 
-		reset {
+		button-reset {
 			label = "Factory Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/armada-385-synology-ds116.dts b/arch/arm/boot/dts/armada-385-synology-ds116.dts
index d8769956cbfc..2622af73c9da 100644
--- a/arch/arm/boot/dts/armada-385-synology-ds116.dts
+++ b/arch/arm/boot/dts/armada-385-synology-ds116.dts
@@ -223,7 +223,7 @@
 	pinctrl-0 = <&spi0_pins>;
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "macronix,mx25l6405d", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts
index 5bd6a66d2c2b..72ac807cae25 100644
--- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
@@ -71,16 +71,19 @@
 			pcie@1,0 {
 				/* Port 0, Lane 0 */
 				status = "okay";
+				slot-power-limit-milliwatt = <10000>;
 			};
 
 			pcie@2,0 {
 				/* Port 1, Lane 0 */
 				status = "okay";
+				slot-power-limit-milliwatt = <10000>;
 			};
 
 			pcie@3,0 {
 				/* Port 2, Lane 0 */
 				status = "okay";
+				slot-power-limit-milliwatt = <10000>;
 			};
 		};
 	};
@@ -102,6 +105,33 @@
 		 */
 		status = "disabled";
 	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SPDIF";
+		simple-audio-card,format = "i2s";
+
+		simple-audio-card,cpu {
+			sound-dai = <&audio_controller 1>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&audio_controller {
+	/* Pin header U16, GPIO51 in SPDIFO mode */
+	pinctrl-0 = <&spdif_pins>;
+	pinctrl-names = "default";
+	spdif-mode;
+	status = "okay";
 };
 
 &bm {
@@ -163,6 +193,7 @@
 	buffer-manager = <&bm>;
 	bm,pool-long = <2>;
 	bm,pool-short = <3>;
+	label = "wan";
 };
 
 &i2c0 {
@@ -188,15 +219,13 @@
 				reg = <0x2b>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				status = "okay";
 
 				/*
 				 * LEDs are controlled by MCU (STM32F0) at
 				 * address 0x2b.
 				 *
-				 * The driver does not support HW control mode
-				 * for the LEDs yet. Disable the LEDs for now.
-				 *
-				 * Also LED functions are not stable yet:
+				 * LED functions are not stable yet:
 				 * - there are 3 LEDs connected via MCU to PCIe
 				 *   ports. One of these ports supports mSATA.
 				 *   There is no mSATA nor PCIe function.
@@ -207,7 +236,6 @@
 				 *   B. Again there is no such function defined.
 				 *   For now we use LED_FUNCTION_INDICATOR
 				 */
-				status = "disabled";
 
 				multi-led@0 {
 					reg = <0x0>;
@@ -345,7 +373,11 @@
 			#size-cells = <0>;
 			reg = <5>;
 
-			/* ATSHA204A at address 0x64 */
+			/* ATSHA204A-MAHDA-T crypto module */
+			crypto@64 {
+				compatible = "atmel,atsha204a";
+				reg = <0x64>;
+			};
 		};
 
 		i2c@6 {
@@ -390,7 +422,8 @@
 	phy1: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
-		marvell,reg-init = <3 18 0 0x4985>;
+		marvell,reg-init = <3 18 0 0x4985>,
+				   <3 16 0xfff0 0x0001>;
 
 		/* irq is connected to &pcawan pin 7 */
 	};
@@ -471,7 +504,7 @@
 		marvell,function = "spi0";
 	};
 
-	spi0cs1_pins: spi0cs1-pins {
+	spi0cs2_pins: spi0cs2-pins {
 		marvell,pins = "mpp26";
 		marvell,function = "spi0";
 	};
@@ -482,7 +515,7 @@
 	pinctrl-0 = <&spi0_pins &spi0cs0_pins>;
 	status = "okay";
 
-	spi-nor@0 {
+	flash@0 {
 		compatible = "spansion,s25fl164k", "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -506,7 +539,7 @@
 		};
 	};
 
-	/* MISO, MOSI, SCLK and CS1 are routed to pin header CN11 */
+	/* MISO, MOSI, SCLK and CS2 are routed to pin header CN11 */
 };
 
 &uart0 {
diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi
index f0022d10c715..83392b92dae2 100644
--- a/arch/arm/boot/dts/armada-385.dtsi
+++ b/arch/arm/boot/dts/armada-385.dtsi
@@ -69,16 +69,25 @@
 				reg = <0x0800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 8>;
 				status = "disabled";
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			/* x1 port */
@@ -88,16 +97,25 @@
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 5>;
 				status = "disabled";
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			/* x1 port */
@@ -107,16 +125,25 @@
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
 					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+						<0 0 0 2 &pcie3_intc 1>,
+						<0 0 0 3 &pcie3_intc 2>,
+						<0 0 0 4 &pcie3_intc 3>;
 				marvell,pcie-port = <2>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 6>;
 				status = "disabled";
+				pcie3_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			/*
@@ -129,16 +156,25 @@
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
 					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie4_intc 0>,
+						<0 0 0 2 &pcie4_intc 1>,
+						<0 0 0 3 &pcie4_intc 2>,
+						<0 0 0 4 &pcie4_intc 3>;
 				marvell,pcie-port = <3>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 7>;
 				status = "disabled";
+				pcie4_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/armada-388-clearfog-base.dts b/arch/arm/boot/dts/armada-388-clearfog-base.dts
index 53b4bd35522a..f7daa3bc707e 100644
--- a/arch/arm/boot/dts/armada-388-clearfog-base.dts
+++ b/arch/arm/boot/dts/armada-388-clearfog-base.dts
@@ -19,7 +19,7 @@
 		pinctrl-0 = <&rear_button_pins>;
 		pinctrl-names = "default";
 
-		button_0 {
+		button-0 {
 			/* The rear SW3 button */
 			label = "Rear Button";
 			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts
index 4140a5303b48..95299167dcf5 100644
--- a/arch/arm/boot/dts/armada-388-clearfog.dts
+++ b/arch/arm/boot/dts/armada-388-clearfog.dts
@@ -35,7 +35,7 @@
 		pinctrl-0 = <&rear_button_pins>;
 		pinctrl-names = "default";
 
-		button_0 {
+		button-0 {
 			/* The rear SW3 button */
 			label = "Rear Button";
 			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts
index a2bec07bf4c5..2bcec5419b66 100644
--- a/arch/arm/boot/dts/armada-388-db.dts
+++ b/arch/arm/boot/dts/armada-388-db.dts
@@ -36,6 +36,11 @@
 			i2c@11000 {
 				status = "okay";
 				clock-frequency = <100000>;
+				audio_codec: audio-codec@4a {
+					#sound-dai-cells = <0>;
+					compatible = "cirrus,cs42l51";
+					reg = <0x4a>;
+				};
 			};
 
 			i2c@11100 {
@@ -99,6 +104,12 @@
 				no-1-8-v;
 			};
 
+			audio-controller@e8000 {
+				pinctrl-0 = <&i2s_pins>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
 			usb3@f0000 {
 				status = "okay";
 			};
@@ -128,12 +139,70 @@
 			};
 		};
 	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Armada 385 DB Audio";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Headphone", "Out Jack",
+			"Line", "In Jack";
+		simple-audio-card,routing =
+			"Out Jack", "HPL",
+			"Out Jack", "HPR",
+			"AIN1L", "In Jack",
+			"AIN1R", "In Jack";
+		status = "disabled";
+
+		simple-audio-card,dai-link@0 {
+			format = "i2s";
+			cpu {
+				sound-dai = <&audio_controller 0>;
+			};
+
+			codec {
+				sound-dai = <&audio_codec>;
+			};
+		};
+
+		simple-audio-card,dai-link@1 {
+			format = "i2s";
+			cpu {
+				sound-dai = <&audio_controller 1>;
+			};
+
+			codec {
+				sound-dai = <&spdif_out>;
+			};
+		};
+
+		simple-audio-card,dai-link@2 {
+			format = "i2s";
+			cpu {
+				sound-dai = <&audio_controller 1>;
+			};
+
+			codec {
+				sound-dai = <&spdif_in>;
+			};
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+
+	spdif_in: spdif-in {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dir";
+	};
 };
 
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "w25q32", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts
index 9d873257ac45..e2ba50520b6b 100644
--- a/arch/arm/boot/dts/armada-388-gp.dts
+++ b/arch/arm/boot/dts/armada-388-gp.dts
@@ -395,7 +395,7 @@
 	pinctrl-0 = <&spi0_pins>;
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "st,m25p128", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-388-rd.dts b/arch/arm/boot/dts/armada-388-rd.dts
index 328a4d6afd2c..c0efafd45b33 100644
--- a/arch/arm/boot/dts/armada-388-rd.dts
+++ b/arch/arm/boot/dts/armada-388-rd.dts
@@ -97,7 +97,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "st,m25p128", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
index 363ac4238859..2c64bc6e5a17 100644
--- a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
+++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
@@ -101,7 +101,7 @@
 	/* The microsom has an optional W25Q32 on board, connected to CS0 */
 	pinctrl-0 = <&spi1_pins>;
 
-	w25q32: spi-flash@0 {
+	w25q32: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "w25q32", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index df3c8d1d8f64..446861b6b17b 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -289,6 +289,18 @@
 					marvell,pins = "mpp44";
 					marvell,function = "sata3";
 				};
+
+				i2s_pins: i2s-pins {
+					marvell,pins = "mpp48", "mpp49",
+						       "mpp50", "mpp51",
+						       "mpp52", "mpp53";
+					marvell,function = "audio";
+				};
+
+				spdif_pins: spdif-pins {
+					marvell,pins = "mpp51";
+					marvell,function = "audio";
+				};
 			};
 
 			gpio0: gpio@18100 {
@@ -298,6 +310,7 @@
 				reg-names = "gpio", "pwm";
 				ngpios = <32>;
 				gpio-controller;
+				gpio-ranges = <&pinctrl 0 0 32>;
 				#gpio-cells = <2>;
 				#pwm-cells = <2>;
 				interrupt-controller;
@@ -316,6 +329,7 @@
 				reg-names = "gpio", "pwm";
 				ngpios = <28>;
 				gpio-controller;
+				gpio-ranges = <&pinctrl 0 32 28>;
 				#gpio-cells = <2>;
 				#pwm-cells = <2>;
 				interrupt-controller;
@@ -618,6 +632,18 @@
 				status = "disabled";
 			};
 
+			audio_controller: audio-controller@e8000 {
+				#sound-dai-cells = <1>;
+				compatible = "marvell,armada-380-audio";
+				reg = <0xe8000 0x4000>, <0x18410 0xc>,
+				      <0x18204 0x4>;
+				reg-names = "i2s_regs", "pll_regs", "soc_ctrl";
+				interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 0>;
+				clock-names = "internal";
+				status = "disabled";
+			};
+
 			usb3_0: usb3@f0000 {
 				compatible = "marvell,armada-380-xhci";
 				reg = <0xf0000 0x4000>,<0xf4000 0x4000>;
diff --git a/arch/arm/boot/dts/armada-390-db.dts b/arch/arm/boot/dts/armada-390-db.dts
index 0e29474ae9a2..792d0a0184e8 100644
--- a/arch/arm/boot/dts/armada-390-db.dts
+++ b/arch/arm/boot/dts/armada-390-db.dts
@@ -81,7 +81,7 @@
 	pinctrl-0 = <&spi1_pins>;
 	pinctrl-names = "default";
 
-	spi-flash@1 {
+	flash@1 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "n25q128a13",
diff --git a/arch/arm/boot/dts/armada-398-db.dts b/arch/arm/boot/dts/armada-398-db.dts
index fc28308e5bc5..ec6cdbeedde7 100644
--- a/arch/arm/boot/dts/armada-398-db.dts
+++ b/arch/arm/boot/dts/armada-398-db.dts
@@ -79,7 +79,7 @@
 	pinctrl-0 = <&spi1_pins>;
 	pinctrl-names = "default";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "n25q128a13", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi
index e0b7c2099831..923b035a3ab3 100644
--- a/arch/arm/boot/dts/armada-39x.dtsi
+++ b/arch/arm/boot/dts/armada-39x.dtsi
@@ -438,16 +438,26 @@
 				reg = <0x0800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 8>;
 				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			/* x1 port */
@@ -457,16 +467,26 @@
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 5>;
 				status = "disabled";
+
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			/* x1 port */
@@ -476,16 +496,26 @@
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
 					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+						<0 0 0 2 &pcie3_intc 1>,
+						<0 0 0 3 &pcie3_intc 2>,
+						<0 0 0 4 &pcie3_intc 3>;
 				marvell,pcie-port = <2>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 6>;
 				status = "disabled";
+
+				pcie3_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			/*
@@ -498,16 +528,26 @@
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
 					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie4_intc 0>,
+						<0 0 0 2 &pcie4_intc 1>,
+						<0 0 0 3 &pcie4_intc 2>,
+						<0 0 0 4 &pcie4_intc 3>;
 				marvell,pcie-port = <3>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 7>;
 				status = "disabled";
+
+				pcie4_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 
diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
index 38a052a0312d..b21ffb819b1d 100644
--- a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
+++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
@@ -76,16 +76,26 @@
 				reg = <0x0800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 58>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 5>;
 				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 
diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
index 606fd3476a59..5a74197be0ad 100644
--- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
@@ -69,14 +69,12 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&keys_pin>;
 		pinctrl-names = "default";
 
-		reset {
+		button-reset {
 			label = "Factory Reset Button";
 			linux,code = <KEY_SETUP>;
 			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
@@ -134,7 +132,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "n25q128a13", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts b/arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts
index a022c68dc943..c28e140b4afc 100644
--- a/arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts
+++ b/arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts
@@ -15,7 +15,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dtsi b/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dtsi
index 32fb21b2bf6a..47b003a81bd4 100644
--- a/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dtsi
+++ b/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dtsi
@@ -80,7 +80,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts b/arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts
index 21f442afab1f..20ba5c823bb2 100644
--- a/arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts
+++ b/arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts
@@ -15,7 +15,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dtsi b/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dtsi
index f3e1a25ca5f2..cab99d8e2911 100644
--- a/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dtsi
+++ b/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dtsi
@@ -80,7 +80,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts
index e05aee6cdc04..2caa3980fdf6 100644
--- a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts
+++ b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts
@@ -15,7 +15,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dtsi b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dtsi
index c8b1355ce15e..7028482ce4b2 100644
--- a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dtsi
+++ b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dtsi
@@ -80,7 +80,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts
index 8a3aa616bbd0..02bef8dc4270 100644
--- a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts
+++ b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts
@@ -93,7 +93,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p64";
diff --git a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
index 4ec0ae01b61d..d1b61dad0c46 100644
--- a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
+++ b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
@@ -89,7 +89,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p64";
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
index 5d04dc68cf57..75318fd0fc11 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -235,7 +235,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p64", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index b4cca507cf13..d1d348b91c0a 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -220,7 +220,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "n25q128a13", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
index 87dcb502f72d..0dad95ea26c2 100644
--- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
+++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
@@ -164,7 +164,7 @@
 		};
 	};
 
-	spi3 {
+	spi-3 {
 		compatible = "spi-gpio";
 		status = "okay";
 		gpio-sck = <&gpio0 25 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
index 8480a16919a0..622ac40dd164 100644
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -172,20 +172,18 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&keys_pin>;
 		pinctrl-names = "default";
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
 		};
 
-		reset {
+		button-reset {
 			label = "Factory Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
@@ -255,7 +253,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "everspin,mr25h256";
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index 8558bf6bb54c..bf9360f41e0a 100644
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -83,16 +83,26 @@
 				reg = <0x0800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 58>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 5>;
 				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie2: pcie@2,0 {
@@ -101,16 +111,26 @@
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 59>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 59>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <1>;
 				clocks = <&gateclk 6>;
 				status = "disabled";
+
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie3: pcie@3,0 {
@@ -119,16 +139,26 @@
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 60>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
 					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 60>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+						<0 0 0 2 &pcie3_intc 1>,
+						<0 0 0 3 &pcie3_intc 2>,
+						<0 0 0 4 &pcie3_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <2>;
 				clocks = <&gateclk 7>;
 				status = "disabled";
+
+				pcie3_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie4: pcie@4,0 {
@@ -137,16 +167,26 @@
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 61>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
 					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 61>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie4_intc 0>,
+						<0 0 0 2 &pcie4_intc 1>,
+						<0 0 0 3 &pcie4_intc 2>,
+						<0 0 0 4 &pcie4_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <3>;
 				clocks = <&gateclk 8>;
 				status = "disabled";
+
+				pcie4_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie5: pcie@5,0 {
@@ -155,16 +195,26 @@
 				reg = <0x2800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 62>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
 					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 62>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie5_intc 0>,
+						<0 0 0 2 &pcie5_intc 1>,
+						<0 0 0 3 &pcie5_intc 2>,
+						<0 0 0 4 &pcie5_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 9>;
 				status = "disabled";
+
+				pcie5_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index 2d85fe8ac327..0714af52e607 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -98,16 +98,26 @@
 				reg = <0x0800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 58>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 5>;
 				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie2: pcie@2,0 {
@@ -116,16 +126,26 @@
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 59>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 59>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <1>;
 				clocks = <&gateclk 6>;
 				status = "disabled";
+
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie3: pcie@3,0 {
@@ -134,16 +154,26 @@
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 60>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
 					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 60>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+						<0 0 0 2 &pcie3_intc 1>,
+						<0 0 0 3 &pcie3_intc 2>,
+						<0 0 0 4 &pcie3_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <2>;
 				clocks = <&gateclk 7>;
 				status = "disabled";
+
+				pcie3_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie4: pcie@4,0 {
@@ -152,16 +182,26 @@
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 61>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
 					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 61>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie4_intc 0>,
+						<0 0 0 2 &pcie4_intc 1>,
+						<0 0 0 3 &pcie4_intc 2>,
+						<0 0 0 4 &pcie4_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <3>;
 				clocks = <&gateclk 8>;
 				status = "disabled";
+
+				pcie4_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie5: pcie@5,0 {
@@ -170,16 +210,26 @@
 				reg = <0x2800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 62>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
 					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 62>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie5_intc 0>,
+						<0 0 0 2 &pcie5_intc 1>,
+						<0 0 0 3 &pcie5_intc 2>,
+						<0 0 0 4 &pcie5_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 9>;
 				status = "disabled";
+
+				pcie5_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie6: pcie@6,0 {
@@ -188,16 +238,26 @@
 				reg = <0x3000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 63>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
 					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 63>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie6_intc 0>,
+						<0 0 0 2 &pcie6_intc 1>,
+						<0 0 0 3 &pcie6_intc 2>,
+						<0 0 0 4 &pcie6_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <1>;
 				clocks = <&gateclk 10>;
 				status = "disabled";
+
+				pcie6_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie7: pcie@7,0 {
@@ -206,16 +266,26 @@
 				reg = <0x3800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 64>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
 					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 64>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie7_intc 0>,
+						<0 0 0 2 &pcie7_intc 1>,
+						<0 0 0 3 &pcie7_intc 2>,
+						<0 0 0 4 &pcie7_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <2>;
 				clocks = <&gateclk 11>;
 				status = "disabled";
+
+				pcie7_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie8: pcie@8,0 {
@@ -224,16 +294,26 @@
 				reg = <0x4000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 65>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
 					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 65>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie8_intc 0>,
+						<0 0 0 2 &pcie8_intc 1>,
+						<0 0 0 3 &pcie8_intc 2>,
+						<0 0 0 4 &pcie8_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <3>;
 				clocks = <&gateclk 12>;
 				status = "disabled";
+
+				pcie8_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie9: pcie@9,0 {
@@ -242,16 +322,26 @@
 				reg = <0x4800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 99>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
 					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 99>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie9_intc 0>,
+						<0 0 0 2 &pcie9_intc 1>,
+						<0 0 0 3 &pcie9_intc 2>,
+						<0 0 0 4 &pcie9_intc 3>;
 				marvell,pcie-port = <2>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 26>;
 				status = "disabled";
+
+				pcie9_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
index 230a3fd36b30..16185edf9aa5 100644
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -119,16 +119,26 @@
 				reg = <0x0800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 58>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 5>;
 				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie2: pcie@2,0 {
@@ -137,16 +147,26 @@
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 59>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 59>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <1>;
 				clocks = <&gateclk 6>;
 				status = "disabled";
+
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie3: pcie@3,0 {
@@ -155,16 +175,26 @@
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 60>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
 					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 60>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+						<0 0 0 2 &pcie3_intc 1>,
+						<0 0 0 3 &pcie3_intc 2>,
+						<0 0 0 4 &pcie3_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <2>;
 				clocks = <&gateclk 7>;
 				status = "disabled";
+
+				pcie3_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie4: pcie@4,0 {
@@ -173,16 +203,26 @@
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 61>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
 					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 61>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie4_intc 0>,
+						<0 0 0 2 &pcie4_intc 1>,
+						<0 0 0 3 &pcie4_intc 2>,
+						<0 0 0 4 &pcie4_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <3>;
 				clocks = <&gateclk 8>;
 				status = "disabled";
+
+				pcie4_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie5: pcie@5,0 {
@@ -191,16 +231,26 @@
 				reg = <0x2800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 62>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
 					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 62>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie5_intc 0>,
+						<0 0 0 2 &pcie5_intc 1>,
+						<0 0 0 3 &pcie5_intc 2>,
+						<0 0 0 4 &pcie5_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 9>;
 				status = "disabled";
+
+				pcie5_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie6: pcie@6,0 {
@@ -209,16 +259,26 @@
 				reg = <0x3000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 63>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
 					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 63>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie6_intc 0>,
+						<0 0 0 2 &pcie6_intc 1>,
+						<0 0 0 3 &pcie6_intc 2>,
+						<0 0 0 4 &pcie6_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <1>;
 				clocks = <&gateclk 10>;
 				status = "disabled";
+
+				pcie6_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie7: pcie@7,0 {
@@ -227,16 +287,26 @@
 				reg = <0x3800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 64>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
 					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 64>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie7_intc 0>,
+						<0 0 0 2 &pcie7_intc 1>,
+						<0 0 0 3 &pcie7_intc 2>,
+						<0 0 0 4 &pcie7_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <2>;
 				clocks = <&gateclk 11>;
 				status = "disabled";
+
+				pcie7_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie8: pcie@8,0 {
@@ -245,16 +315,26 @@
 				reg = <0x4000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 65>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
 					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 65>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie8_intc 0>,
+						<0 0 0 2 &pcie8_intc 1>,
+						<0 0 0 3 &pcie8_intc 2>,
+						<0 0 0 4 &pcie8_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <3>;
 				clocks = <&gateclk 12>;
 				status = "disabled";
+
+				pcie8_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie9: pcie@9,0 {
@@ -263,16 +343,26 @@
 				reg = <0x4800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 99>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
 					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 99>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie9_intc 0>,
+						<0 0 0 2 &pcie9_intc 1>,
+						<0 0 0 3 &pcie9_intc 2>,
+						<0 0 0 4 &pcie9_intc 3>;
 				marvell,pcie-port = <2>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 26>;
 				status = "disabled";
+
+				pcie9_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie10: pcie@a,0 {
@@ -281,16 +371,26 @@
 				reg = <0x5000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 103>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
 					  0x81000000 0 0 0x81000000 0xa 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 103>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie10_intc 0>,
+						<0 0 0 2 &pcie10_intc 1>,
+						<0 0 0 3 &pcie10_intc 2>,
+						<0 0 0 4 &pcie10_intc 3>;
 				marvell,pcie-port = <3>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 27>;
 				status = "disabled";
+
+				pcie10_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index 0efcc166dabf..1ecf72a61bca 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -97,12 +97,10 @@
 				};
 			};
 
-			gpio_keys {
+			gpio-keys {
 				compatible = "gpio-keys";
-				#address-cells = <1>;
-				#size-cells = <0>;
 
-				init {
+				button-init {
 					label = "Init Button";
 					linux,code = <KEY_POWER>;
 					gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
index 809e821d7399..5551bac1962c 100644
--- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts
+++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
@@ -274,7 +274,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "micron,n25q064", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/artpec6-devboard.dts b/arch/arm/boot/dts/artpec6-devboard.dts
index d20d95359b28..042a9cc920c6 100644
--- a/arch/arm/boot/dts/artpec6-devboard.dts
+++ b/arch/arm/boot/dts/artpec6-devboard.dts
@@ -1,10 +1,5 @@
-/*
- * Axis ARTPEC-6 development board.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Axis ARTPEC-6 development board.
 
 /dts-v1/;
 #include "artpec6.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
index 1d24b394ea4c..a497dd135491 100644
--- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts
+++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
@@ -5,7 +5,7 @@
 
 / {
 	model = "AST2500 EVB";
-	compatible = "aspeed,ast2500";
+	compatible = "aspeed,ast2500-evb", "aspeed,ast2500";
 
 	aliases {
 		serial4 = &uart5;
diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts b/arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts
index dd7148060c4a..f34a2b1ec2f0 100644
--- a/arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts
+++ b/arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts
@@ -5,6 +5,7 @@
 
 / {
 	model = "AST2600 A1 EVB";
+	compatible = "aspeed,ast2600-evb-a1", "aspeed,ast2600-evb", "aspeed,ast2600";
 
 	/delete-node/regulator-vcc-sdhci0;
 	/delete-node/regulator-vcc-sdhci1;
diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
index b7eb552640cb..de83c0eb1d6e 100644
--- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts
+++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
@@ -8,7 +8,7 @@
 
 / {
 	model = "AST2600 EVB";
-	compatible = "aspeed,ast2600";
+	compatible = "aspeed,ast2600-evb", "aspeed,ast2600";
 
 	aliases {
 		serial4 = &uart5;
@@ -23,6 +23,26 @@
 		reg = <0x80000000 0x80000000>;
 	};
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		video_engine_memory: video {
+			size = <0x04000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
 	vcc_sdhci0: regulator-vcc-sdhci0 {
 		compatible = "regulator-fixed";
 		regulator-name = "SDHCI0 Vcc";
@@ -103,7 +123,7 @@
 &mac0 {
 	status = "okay";
 
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 	phy-handle = <&ethphy0>;
 
 	pinctrl-names = "default";
@@ -114,7 +134,7 @@
 &mac1 {
 	status = "okay";
 
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 	phy-handle = <&ethphy1>;
 
 	pinctrl-names = "default";
@@ -162,6 +182,7 @@
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
+		spi-rx-bus-width = <4>;
 		spi-max-frequency = <50000000>;
 #include "openbmc-flash-layout-64.dtsi"
 	};
@@ -176,6 +197,7 @@
 		status = "okay";
 		m25p,fast-read;
 		label = "pnor";
+		spi-rx-bus-width = <4>;
 		spi-max-frequency = <100000000>;
 	};
 };
@@ -187,11 +209,6 @@
 
 &i2c0 {
 	status = "okay";
-
-	temp@2e {
-		compatible = "adi,adt7490";
-		reg = <0x2e>;
-	};
 };
 
 &i2c1 {
@@ -220,10 +237,26 @@
 
 &i2c7 {
 	status = "okay";
+
+	temp@2e {
+		compatible = "adi,adt7490";
+		reg = <0x2e>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
 };
 
 &i2c8 {
 	status = "okay";
+
+	lm75@4d {
+		compatible = "national,lm75";
+		reg = <0x4d>;
+	};
 };
 
 &i2c9 {
@@ -300,3 +333,18 @@
 	vqmmc-supply = <&vccq_sdhci1>;
 	clk-phase-sd-hs = <7>, <200>;
 };
+
+&vhub {
+	status = "okay";
+	pinctrl-names = "default";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-amd-daytonax.dts b/arch/arm/boot/dts/aspeed-bmc-amd-daytonax.dts
new file mode 100644
index 000000000000..64bb9bf92de2
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-amd-daytonax.dts
@@ -0,0 +1,319 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "AMD DaytonaX BMC";
+	compatible = "amd,daytonax-bmc", "aspeed,ast2500";
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	aliases {
+		serial0 = &uart1;
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-fault {
+			gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		led-identify {
+			gpios = <&gpio ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
+			<&adc 10>, <&adc 11>, <&adc 12>, <&adc 13>, <&adc 14>,
+			<&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&uart1 {
+	//Host Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		&pinctrl_rxd1_default
+		&pinctrl_nrts1_default
+		&pinctrl_ndtr1_default
+		&pinctrl_ndsr1_default
+		&pinctrl_ncts1_default
+		&pinctrl_ndcd1_default
+		&pinctrl_nri1_default>;
+};
+
+&uart5 {
+	//BMC Console
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x3f8>;
+	aspeed,lpc-interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		&pinctrl_adc1_default
+		&pinctrl_adc2_default
+		&pinctrl_adc3_default
+		&pinctrl_adc4_default
+		&pinctrl_adc5_default
+		&pinctrl_adc6_default
+		&pinctrl_adc7_default
+		&pinctrl_adc8_default
+		&pinctrl_adc9_default
+		&pinctrl_adc10_default
+		&pinctrl_adc11_default
+		&pinctrl_adc12_default
+		&pinctrl_adc13_default
+		&pinctrl_adc14_default
+		&pinctrl_adc15_default>;
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"","","led-fault","led-identify","","","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"id-button","","","","","","","",
+	/*D0-D7*/	"","","ASSERT_BMC_READY","","","","","",
+	/*E0-E7*/	"reset-button","reset-control","power-button","power-control","",
+			"power-good","power-ok","",
+	/*F0-F7*/	"","","","","","","BATTERY_DETECT","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"","","","","","","","",
+	/*AB0-AB7*/	"FM_BMC_READ_SPD_TEMP","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>, <0x81>;
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+		&pinctrl_pwm1_default
+		&pinctrl_pwm2_default
+		&pinctrl_pwm3_default
+		&pinctrl_pwm4_default
+		&pinctrl_pwm5_default
+		&pinctrl_pwm6_default
+		&pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@6 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+
+	fan@8 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+	};
+
+	fan@9 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+	};
+
+	fan@10 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+	};
+
+	fan@11 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+	};
+
+	fan@12 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
+	};
+
+	fan@13 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
+	};
+
+	fan@14 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
+	};
+
+	fan@15 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0f>;
+	};
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&vhub {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
index 4c3c3f1a12ea..d127cbcc7998 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
@@ -97,101 +97,6 @@
 		};
 	};
 
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		shutdown_ack {
-			label = "SHUTDOWN_ACK";
-			gpios = <&gpio ASPEED_GPIO(G, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(G, 2)>;
-		};
-
-		reboot_ack {
-			label = "REBOOT_ACK";
-			gpios = <&gpio ASPEED_GPIO(J, 3) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(J, 3)>;
-		};
-
-		S0_overtemp {
-			label = "S0_OVERTEMP";
-			gpios = <&gpio ASPEED_GPIO(G, 3) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(G, 3)>;
-		};
-
-		S0_hightemp {
-			label = "S0_HIGHTEMP";
-			gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(J, 0)>;
-		};
-
-		S0_cpu_fault {
-			label = "S0_CPU_FAULT";
-			gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>;
-			linux,code = <ASPEED_GPIO(J, 1)>;
-		};
-
-		S0_scp_auth_fail {
-			label = "S0_SCP_AUTH_FAIL";
-			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(J, 2)>;
-		};
-
-		S1_scp_auth_fail {
-			label = "S1_SCP_AUTH_FAIL";
-			gpios = <&gpio ASPEED_GPIO(Z, 5) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(Z, 5)>;
-		};
-
-		S1_overtemp {
-			label = "S1_OVERTEMP";
-			gpios = <&gpio ASPEED_GPIO(Z, 6) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(Z, 6)>;
-		};
-
-		S1_hightemp {
-			label = "S1_HIGHTEMP";
-			gpios = <&gpio ASPEED_GPIO(AB, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(AB, 0)>;
-		};
-
-		S1_cpu_fault {
-			label = "S1_CPU_FAULT";
-			gpios = <&gpio ASPEED_GPIO(Z, 1) GPIO_ACTIVE_HIGH>;
-			linux,code = <ASPEED_GPIO(Z, 1)>;
-		};
-
-		id_button {
-			label = "ID_BUTTON";
-			gpios = <&gpio ASPEED_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(Q, 5)>;
-		};
-
-		psu1_vin_good {
-			label = "PSU1_VIN_GOOD";
-			gpios = <&gpio ASPEED_GPIO(H, 4) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(H, 4)>;
-		};
-
-		psu2_vin_good {
-			label = "PSU2_VIN_GOOD";
-			gpios = <&gpio ASPEED_GPIO(H, 5) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(H, 5)>;
-		};
-
-		psu1_present {
-			label = "PSU1_PRESENT";
-			gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(I, 0)>;
-		};
-
-		psu2_present {
-			label = "PSU2_PRESENT";
-			gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(I, 1)>;
-		};
-
-	};
-
 	gpioA0mux: mux-controller {
 		compatible = "gpio-mux";
 		#mux-control-cells = <0>;
@@ -339,17 +244,8 @@
 			<&adc10mux 0>, <&adc10mux 1>,
 			<&adc11mux 0>, <&adc11mux 1>,
 			<&adc12mux 0>, <&adc12mux 1>,
-			<&adc13mux 0>, <&adc13mux 1>;
-	};
-
-	iio-hwmon-adc14 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 14>;
-	};
-
-	iio-hwmon-battery {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 15>;
+			<&adc13mux 0>, <&adc13mux 1>,
+			<&adc 14>, <&adc 15>;
 	};
 };
 
@@ -362,6 +258,13 @@
 		/* spi-max-frequency = <50000000>; */
 #include "openbmc-flash-layout-64.dtsi"
 	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
 };
 
 &spi1 {
@@ -853,7 +756,7 @@
 	/*E0-E7*/	"","","","","","","","",
 	/*F0-F7*/	"","","BMC_SYS_PSON_L","S0_DDR_SAVE","PGOOD",
 			"S1_DDR_SAVE","","",
-	/*G0-G7*/	"S0_FW_BOOT_OK","SHD_REQ_L","","S0_OVERTEMP_L","","",
+	/*G0-G7*/	"host0-ready","SHD_REQ_L","","S0_OVERTEMP_L","","",
 			"","",
 	/*H0-H7*/	"","","","","PSU1_VIN_GOOD","PSU2_VIN_GOOD","","",
 	/*I0-I7*/	"PSU1_PRESENT","PSU2_PRESENT","S1_BMC_SPECIAL_BOOT",
@@ -869,7 +772,7 @@
 	/*Q0-Q7*/	"","","","","","UID_BUTTON","","",
 	/*R0-R7*/	"","","BMC_EXT_HIGHTEMP_L","OCP_AUX_PWREN",
 			"OCP_MAIN_PWREN","RESET_BUTTON","","",
-	/*S0-S7*/	"","","","","RTC_BAT_SEN_EN","","","",
+	/*S0-S7*/	"","","","","rtc-battery-voltage-read-enable","","","",
 	/*T0-T7*/	"","","","","","","","",
 	/*U0-U7*/	"","","","","","","","",
 	/*V0-V7*/	"","","","","","","","",
@@ -884,7 +787,7 @@
 	/*AC0-AC7*/	"SYS_PWR_GD","","","","","BMC_READY","SLAVE_PRESENT_L",
 			"BMC_OCP_PG";
 
-	i2c4_o_en {
+	i2c4-o-en-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(Y, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
new file mode 100644
index 000000000000..606cd4be245a
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
@@ -0,0 +1,546 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (c) 2022, Ampere Computing LLC
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Ampere Mt.Mitchell BMC";
+	compatible = "ampere,mtmitchell-bmc", "aspeed,ast2600";
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: video {
+			size = <0x04000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+		};
+	};
+
+	voltage_mon_reg: voltage-mon-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ltc2497_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	gpioI5mux: mux-controller {
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+		mux-gpios = <&gpio0 ASPEED_GPIO(I, 5) GPIO_ACTIVE_HIGH>;
+	};
+
+	adc0mux: adc0mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc0 0>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc1mux: adc1mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc0 1>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc2mux: adc2mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc0 2>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc3mux: adc3mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc0 3>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc4mux: adc4mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc0 4>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc5mux: adc5mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc0 5>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc6mux: adc6mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc0 6>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc7mux: adc7mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc0 7>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc8mux: adc8mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc1 0>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc9mux: adc9mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc1 1>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc10mux: adc10mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc1 2>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc11mux: adc11mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc1 3>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc12mux: adc12mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc1 4>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc13mux: adc13mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc1 5>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc14mux: adc14mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc1 6>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc15mux: adc15mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc1 7>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0mux 0>, <&adc0mux 1>,
+			<&adc1mux 0>, <&adc1mux 1>,
+			<&adc2mux 0>, <&adc2mux 1>,
+			<&adc3mux 0>, <&adc3mux 1>,
+			<&adc4mux 0>, <&adc4mux 1>,
+			<&adc5mux 0>, <&adc5mux 1>,
+			<&adc6mux 0>, <&adc6mux 1>,
+			<&adc7mux 0>, <&adc7mux 1>,
+			<&adc8mux 0>, <&adc8mux 1>,
+			<&adc9mux 0>, <&adc9mux 1>,
+			<&adc10mux 0>, <&adc10mux 1>,
+			<&adc11mux 0>, <&adc11mux 1>,
+			<&adc12mux 0>, <&adc12mux 1>,
+			<&adc13mux 0>, <&adc13mux 1>,
+			<&adc14mux 0>, <&adc14mux 1>,
+			<&adc15mux 0>, <&adc15mux 1>,
+			<&adc_i2c 0>, <&adc_i2c 1>,
+			<&adc_i2c 2>, <&adc_i2c 3>,
+			<&adc_i2c 4>, <&adc_i2c 5>,
+			<&adc_i2c 6>, <&adc_i2c 7>,
+			<&adc_i2c 8>, <&adc_i2c 9>,
+			<&adc_i2c 10>, <&adc_i2c 11>,
+			<&adc_i2c 12>, <&adc_i2c 13>,
+			<&adc_i2c 14>, <&adc_i2c 15>;
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mac0 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default>;
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	temperature-sensor@2e {
+		compatible = "adi,adt7490";
+		reg = <0x2e>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	psu@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	psu@59 {
+		compatible = "pmbus";
+		reg = <0x59>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	adc_i2c: adc@16 {
+		compatible = "lltc,ltc2497";
+		reg = <0x16>;
+		vref-supply = <&voltage_mon_reg>;
+		#io-channel-cells = <1>;
+	 };
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		i2c4_bus70_chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			outlet_temp1: temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+			psu1_inlet_temp2: temperature-sensor@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+		};
+
+		i2c4_bus70_chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+
+			pcie_zone_temp1: temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+			psu0_inlet_temp2: temperature-sensor@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+		};
+
+		i2c4_bus70_chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			pcie_zone_temp2: temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+			outlet_temp2: temperature-sensor@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+		};
+
+		i2c4_bus70_chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			mb_inlet_temp1: temperature-sensor@7c {
+				compatible = "microchip,emc1413";
+				reg = <0x7c>;
+			};
+			mb_inlet_temp2: temperature-sensor@4c {
+				compatible = "microchip,emc1413";
+				reg = <0x4c>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c14 {
+	status = "okay";
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	bmc_ast2600_cpu: temperature-sensor@35 {
+		compatible = "ti,tmp175";
+		reg = <0x35>;
+	};
+};
+
+&adc0 {
+	ref_voltage = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	ref_voltage = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","i2c2-reset-n","i2c6-reset-n","i2c4-reset-n",
+	/*B0-B7*/	"","","","","host0-sysreset-n","host0-pmin-n","","",
+	/*C0-C7*/	"s0-vrd-fault-n","s1-vrd-fault-n","","",
+			"irq-n","","vrd-sel","spd-sel",
+	/*D0-D7*/	"presence-ps0","presence-ps1","hsc-12vmain-alt2-n","ext-high-temp-n",
+			"","bmc-ncsi-txen","","",
+	/*E0-E7*/	"","","clk50m-bmc-ncsi","","","","","",
+	/*F0-F7*/	"s0-pcp-oc-warn-n","s1-pcp-oc-warn-n","power-chassis-control",
+			"cpu-bios-recover","s0-heartbeat","hs-csout-prochot",
+			"s0-vr-hot-n","s1-vr-hot-n",
+	/*G0-G7*/	"","","hsc-12vmain-alt1-n","","","","","",
+	/*H0-H7*/	"","","wd-disable-n","power-chassis-good","","","","",
+	/*I0-I7*/	"","","","","","adc-sw","power-button","rtc-battery-voltage-read-enable",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","s0-ddr-save","soc-spi-nor-access","presence-cpu0",
+			"s0-rtc-lock","","","",
+	/*N0-N7*/	"hpm-fw-recovery","hpm-stby-rst-n","jtag-sel-s0","led-sw-hb",
+			"jtag-dbgr-prsnt-n","s1-heartbeat","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"ps0-ac-loss-n","ps1-ac-loss-n","","",
+			"led-fault","cpld-user-mode","jtag-srst-n","led-bmc-hb",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","identify-button","led-identify",
+			"s1-ddr-save","spi-nor-access","sys-pgood","presence-cpu1",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n",
+			"host0-reboot-ack-n","host0-ready","host0-shd-req-n",
+			"host0-shd-ack-n","s0-overtemp-n",
+	/*W0-W7*/	"ocp-aux-pwren","ocp-main-pwren","ocp-pgood","",
+			"bmc-ok","bmc-ready","spi0-program-sel","spi0-backup-sel",
+	/*X0-X7*/	"i2c-backup-sel","s1-fault-alert","s1-fw-boot-ok",
+			"s1-hightemp-n","s0-spi-auth-fail-n","s1-sys-auth-failure-n",
+			"s1-overtemp-n","s1-spi-auth-fail-n",
+	/*Y0-Y7*/	"","","","","","","","host0-special-boot",
+	/*Z0-Z7*/	"reset-button","ps0-pgood","ps1-pgood","","","","","";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/	"","","","","","","","",
+	/*18B0-18B7*/	"","","","","","","s0-soc-pgood","",
+	/*18C0-18C7*/	"uart1-mode0","uart1-mode1","uart2-mode0","uart2-mode1",
+			"uart3-mode0","uart3-mode1","uart4-mode0","uart4-mode1",
+	/*18D0-18D7*/	"","","","","","","","",
+	/*18E0-18E3*/	"","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-arm-centriq2400-rep.dts b/arch/arm/boot/dts/aspeed-bmc-arm-centriq2400-rep.dts
deleted file mode 100644
index 3395de96ee11..000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-arm-centriq2400-rep.dts
+++ /dev/null
@@ -1,225 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/dts-v1/;
-
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-
-/ {
-	model = "Qualcomm Centriq 2400  REP AST2520";
-	compatible = "qualcomm,centriq2400-rep-bmc", "aspeed,ast2500";
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlycon";
-	};
-
-	memory@80000000 {
-		reg = <0x80000000 0x40000000>;
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
-                        <&adc 4>, <&adc 5>, <&adc 6>, <&adc 8>;
-	};
-
-	iio-hwmon-battery {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 7>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		uid_led {
-			label = "UID_LED";
-			gpios = <&gpio ASPEED_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
-		};
-
-		ras_error_led {
-			label = "RAS_ERROR_LED";
-			gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
-		};
-
-		system_fault {
-			label = "System_fault";
-			gpios = <&gpio ASPEED_GPIO(A, 1) GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-#include "openbmc-flash-layout.dtsi"
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-	flash@0 {
-		status = "okay";
-	};
-};
-
-&spi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi2ck_default
-			&pinctrl_spi2miso_default
-			&pinctrl_spi2mosi_default
-			&pinctrl_spi2cs0_default>;
-};
-
-&uart3 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>;
-	current-speed = <115200>;
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&mac0 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-
-	tmp421@1e {
-		compatible = "ti,tmp421";
-		reg = <0x1e>;
-	};
-	tmp421@2a {
-		compatible = "ti,tmp421";
-		reg = <0x2a>;
-	};
-	tmp421@4e {
-		compatible = "ti,tmp421";
-		reg = <0x4e>;
-	};
-	tmp421@1c {
-		compatible = "ti,tmp421";
-		reg = <0x1c>;
-	};
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-};
-
-&i2c5 {
-	status = "okay";
-};
-
-&i2c6 {
-	status = "okay";
-
-	tmp421@1d {
-		compatible = "ti,tmp421";
-		reg = <0x1d>;
-	};
-	tmp421@1f {
-		compatible = "ti,tmp421";
-		reg = <0x1f>;
-	};
-	tmp421@4d {
-		compatible = "ti,tmp421";
-		reg = <0x4d>;
-	};
-	tmp421@4f {
-		compatible = "ti,tmp421";
-		reg = <0x4f>;
-	};
-	nvt210@4c {
-		compatible = "nvt210";
-		reg = <0x4c>;
-	};
-	eeprom@50 {
-		compatible = "atmel,24c128";
-		reg = <0x50>;
-		pagesize = <128>;
-	};
-};
-
-&i2c7 {
-	status = "okay";
-};
-
-&i2c8 {
-	status = "okay";
-
-	pca9641@70 {
-		compatible = "nxp,pca9641";
-		reg = <0x70>;
-		i2c-arb {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			tmp421@1d {
-				compatible = "tmp421";
-				reg = <0x1d>;
-			};
-			adm1278@12 {
-				compatible = "adi,adm1278";
-				reg = <0x12>;
-				Rsense = <500>;
-			};
-			eeprom@50 {
-				compatible = "atmel,24c02";
-				reg = <0x50>;
-			};
-			ds1100@58 {
-				compatible = "ds1100";
-				reg = <0x58>;
-			};
-		};
-	};
-};
-
-&i2c9 {
-	status = "okay";
-};
-
-&vuart {
-	status = "okay";
-};
-
-&gfx {
-	status = "okay";
-};
-
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
-&gpio {
-	pin_gpio_c7 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
-		output;
-		line-name = "BIOS_SPI_MUX_S";
-	};
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts b/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts
new file mode 100644
index 000000000000..ff4c07c69af1
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts
@@ -0,0 +1,261 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/{
+	model = "ASRock ROMED8HM3 BMC v1.00";
+	compatible = "asrock,romed8hm3-bmc", "aspeed,ast2500";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=tty0 console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		system-fault {
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+			panic-indicator;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <100000000>; /* 100 MHz */
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x2f8>;
+	aspeed,lpc-interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	/* inlet temp sensor */
+	w83773g@4c {
+		compatible = "nuvoton,w83773g";
+		reg = <0x4c>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* IPB temp sensor */
+	w83773g@4c {
+		compatible = "nuvoton,w83773g";
+		reg = <0x4c>;
+	};
+
+	/* IPB PMIC */
+	lm25066@40 {
+		compatible = "lm25066";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <1000>;
+	};
+
+	/* 12VSB PMIC */
+	lm25066@41 {
+		compatible = "lm25066";
+		reg = <0x41>;
+		shunt-resistor-micro-ohms = <10000>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+
+	/* Baseboard FRU eeprom */
+	eeprom@50 {
+		compatible = "st,24c128", "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3_default
+		&pinctrl_pwm4_default
+		&pinctrl_pwm5_default
+		&pinctrl_pwm6_default>;
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03 0x0b>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0c>;
+	};
+
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05 0x0d>;
+	};
+
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x0e>;
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+		/*  A */ "LOCATORLED_STATUS_N", "BMC_MAC2_INTB", "NMI_BTN_N", "BMC_NMI",
+			"", "", "", "",
+		/*  B */ "POST_COMPLETE_N", "", "", "", "", "", "", "",
+		/*  C */ "", "", "", "", "PCIE_HP_SEL_N", "PCIE_SATA_SEL_N", "LOCATORBTN", "",
+		/*  D */ "BMC_PSIN", "BMC_PSOUT", "BMC_RESETCON", "RESETCON",
+			"", "", "", "PSU_FAN_FAIL_N",
+		/*  E */ "", "", "", "", "", "", "", "",
+		/*  F */ "NIC_PWR_GOOD", "PRSNTB0", "PRSNTB1", "PRSNTB2",
+			"PRSNTB3", "", "3VSB_PCIE1_PG", "12V_PCIE1_PG",
+		/*  G */ "HWM_BAT_EN", "CHASSIS_ID0", "CHASSIS_ID1", "CHASSIS_ID2",
+			"BMC_ALERT1_N_R", "BMC_ALERT2_N_R", "BMC_ALERT3_N", "BMC_ALERT4_N",
+		/*  H */ "X24_C1_PRSNT", "X24_C2_PRSNT", "X24_C3_PRSNT", "FM_MEM_THERM_EVENT_BMC_R_N",
+			"FACMODE", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN",
+		/*  I */ "", "", "", "", "", "", "", "",
+		/*  J */ "BMC_READY", "BMC_PCH_BIOS_CS_N", "", "P0_MA_DDR_QS_CS_N",
+			"", "", "", "",
+		/*  K */ "", "", "", "", "", "", "", "",
+		/*  L */ "", "", "", "", "", "", "", "",
+		/*  M */ "", "", "MEZZ_PWRBRK_N", "OCP_HP_RST_EN",
+			"MAIN_PWR_EN_G", "BMC_MAIN_EN", "AUX_PWR_EN_G", "BMC_AUX_EN",
+		/*  N */ "", "", "", "", "", "", "", "",
+		/*  O */ "", "", "", "", "", "", "", "",
+		/*  P */ "", "", "", "", "", "", "", "",
+		/*  Q */ "", "", "", "",
+			"BMC_SMB_PRESENT_1_N", "BMC_SMB_PRESENT_2_N",
+			"BMC_SMB_PRESENT_3_N", "BMC_PCIE_WAKE_N",
+		/*  R */ "", "", "THERMALTRIP_CLEAR_N", "", "", "", "", "",
+		/*  S */ "", "", "", "", "", "", "", "",
+		/*  T */ "", "", "", "", "", "", "", "",
+		/*  U */ "", "", "", "", "", "", "", "",
+		/*  V */ "", "", "", "", "", "", "", "",
+		/*  W */ "", "", "", "", "", "", "", "",
+		/*  X */ "", "", "", "", "", "", "", "",
+		/*  Y */ "SLP_S3", "SLP_S4_S5", "NODE_ID_1", "NODE_ID_2", "", "", "", "",
+		/*  Z */ "", "", "SYSTEM_FAULT_LED_N", "FAST_THROTTLE_N",
+			"", "", "", "",
+		/* AA */ "FM_CPU0_IBMC_THERMTRIP_N", "", "PROCHOT_L_G", "",
+			"", "", "", "",
+		/* AB */ "BMC_FORCE_SELFREFRESH", "PWRGD_OUT", "", "IRQ_BMC_PCH_SMI_LPC_N",
+			"", "", "", "",
+		/* AC */ "", "", "", "", "", "", "", "";
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		&pinctrl_adc1_default
+		&pinctrl_adc2_default
+		&pinctrl_adc3_default
+		&pinctrl_adc4_default
+		&pinctrl_adc5_default
+		&pinctrl_adc6_default
+		&pinctrl_adc7_default
+		&pinctrl_adc8_default
+		&pinctrl_adc9_default
+		&pinctrl_adc10_default
+		&pinctrl_adc11_default
+		&pinctrl_adc12_default
+		&pinctrl_adc13_default
+		&pinctrl_adc14_default
+		&pinctrl_adc15_default>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts b/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts
index 0d1fb5ccfd36..f75cad41ae6f 100644
--- a/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts
@@ -100,7 +100,7 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		burn-in-signal {
+		event-burn-in-signal {
 			label = "burn-in";
 			gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(R, 5)>;
@@ -111,139 +111,139 @@
 		compatible = "gpio-keys-polled";
 		poll-interval = <1000>;
 
-		rear-riser1-presence {
+		event-rear-riser1-presence {
 			label = "rear-riser1-presence";
 			gpios = <&pca0 1 GPIO_ACTIVE_LOW>;
 			linux,code = <1>;
 		};
 
-		alrt-pvddq-cpu0 {
+		event-alrt-pvddq-cpu0 {
 			label = "alrt-pvddq-cpu0";
 			gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
 			linux,code = <2>;
 		};
 
-		rear-riser0-presence {
+		event-rear-riser0-presence {
 			label = "rear-riser0-presence";
 			gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
 			linux,code = <3>;
 		};
 
-		fault-pvddq-cpu0 {
+		event-fault-pvddq-cpu0 {
 			label = "fault-pvddq-cpu0";
 			gpios = <&pca0 10 GPIO_ACTIVE_LOW>;
 			linux,code = <4>;
 		};
 
-		alrt-pvddq-cpu1 {
+		event-alrt-pvddq-cpu1 {
 			label = "alrt-pvddq-cpu1";
 			gpios = <&pca0 11 GPIO_ACTIVE_LOW>;
 			linux,code = <5>;
 		};
 
-		fault-pvddq-cpu1 {
+		event-fault-pvddq-cpu1 {
 			label = "alrt-pvddq-cpu1";
 			gpios = <&pca0 12 GPIO_ACTIVE_LOW>;
 			linux,code = <6>;
 		};
 
-		fault-pvccin-cpu1 {
+		event-fault-pvccin-cpu1 {
 			label = "fault-pvccin-cpuq";
 			gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
 			linux,code = <7>;
 		};
 
-		bmc-rom0-wp {
+		event-bmc-rom0-wp {
 			label = "bmc-rom0-wp";
 			gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
 			linux,code = <8>;
 		};
 
-		bmc-rom1-wp {
+		event-bmc-rom1-wp {
 			label = "bmc-rom1-wp";
 			gpios = <&pca1 1 GPIO_ACTIVE_LOW>;
 			linux,code = <9>;
 		};
 
-		fan0-presence {
+		event-fan0-presence {
 			label = "fan0-presence";
 			gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
 			linux,code = <10>;
 		};
 
-		fan1-presence {
+		event-fan1-presence {
 			label = "fan1-presence";
 			gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
 			linux,code = <11>;
 		};
 
-		fan2-presence {
+		event-fan2-presence {
 			label = "fan2-presence";
 			gpios = <&pca1 4 GPIO_ACTIVE_LOW>;
 			linux,code = <12>;
 		};
 
-		fan3-presence {
+		event-fan3-presence {
 			label = "fan3-presence";
 			gpios = <&pca1 5 GPIO_ACTIVE_LOW>;
 			linux,code = <13>;
 		};
 
-		fan4-presence {
+		event-fan4-presence {
 			label = "fan4-presence";
 			gpios = <&pca1 6 GPIO_ACTIVE_LOW>;
 			linux,code = <14>;
 		};
 
-		fan5-presence {
+		event-fan5-presence {
 			label = "fan5-presence";
 			gpios = <&pca1 7 GPIO_ACTIVE_LOW>;
 			linux,code = <15>;
 		};
 
-		front-bp1-presence {
+		event-front-bp1-presence {
 			label = "front-bp1-presence";
 			gpios = <&pca1 8 GPIO_ACTIVE_LOW>;
 			linux,code = <16>;
 		};
 
-		rear-bp-presence {
+		event-rear-bp-presence {
 			label = "rear-bp-presence";
 			gpios = <&pca1 9 GPIO_ACTIVE_LOW>;
 			linux,code = <17>;
 		};
 
-		fault-pvccin-cpu0 {
+		event-fault-pvccin-cpu0 {
 			label = "fault-pvccin-cpu0";
 			gpios = <&pca1 10 GPIO_ACTIVE_LOW>;
 			linux,code = <18>;
 		};
 
-		alrt-p1v05-pvcc {
+		event-alrt-p1v05-pvcc {
 			label = "alrt-p1v05-pvcc1";
 			gpios = <&pca1 11 GPIO_ACTIVE_LOW>;
 			linux,code = <19>;
 		};
 
-		fault-p1v05-pvccio {
+		event-fault-p1v05-pvccio {
 			label = "alrt-p1v05-pvcc1";
 			gpios = <&pca1 12 GPIO_ACTIVE_LOW>;
 			linux,code = <20>;
 		};
 
-		alrt-p1v8-pvccio {
+		event-alrt-p1v8-pvccio {
 			label = "alrt-p1v8-pvccio";
 			gpios = <&pca1 13 GPIO_ACTIVE_LOW>;
 			linux,code = <21>;
 		};
 
-		fault-p1v8-pvccio {
+		event-fault-p1v8-pvccio {
 			label = "fault-p1v8-pvccio";
 			gpios = <&pca1 14 GPIO_ACTIVE_LOW>;
 			linux,code = <22>;
 		};
 
-		front-bp0-presence {
+		event-front-bp0-presence {
 			label = "front-bp0-presence";
 			gpios = <&pca1 15 GPIO_ACTIVE_LOW>;
 			linux,code = <23>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts
index f973ea883b97..1fc3e7cbf0d1 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts
@@ -5,6 +5,9 @@
 #include "aspeed-g6.dtsi"
 #include <dt-bindings/gpio/aspeed-gpio.h>
 #include <dt-bindings/usb/pd.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/i2c/i2c.h>
 
 / {
 	model = "Facebook Bletchley BMC";
@@ -31,7 +34,7 @@
 			<&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
 	};
 
-	spi_gpio: spi-gpio {
+	spi1_gpio: spi1-gpio {
 		compatible = "spi-gpio";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -53,115 +56,141 @@
 		// Fixed link
 	};
 
-	leds {
+	front_gpio_leds {
 		compatible = "gpio-leds";
-
 		sys_log_id {
-			retain-state-shutdown;
-			default-state = "keep";
+			default-state = "off";
 			gpios = <&front_leds 0 GPIO_ACTIVE_HIGH>;
 		};
+	};
+
+	fan_gpio_leds {
+		compatible = "gpio-leds";
 		fan0_blue {
 			retain-state-shutdown;
 			default-state = "on";
-			gpios = <&fan_ioexp 8 GPIO_ACTIVE_HIGH>;
+			gpios = <&fan_leds 8 GPIO_ACTIVE_HIGH>;
 		};
 		fan1_blue {
 			retain-state-shutdown;
 			default-state = "on";
-			gpios = <&fan_ioexp 9 GPIO_ACTIVE_HIGH>;
+			gpios = <&fan_leds 9 GPIO_ACTIVE_HIGH>;
 		};
 		fan2_blue {
 			retain-state-shutdown;
 			default-state = "on";
-			gpios = <&fan_ioexp 10 GPIO_ACTIVE_HIGH>;
+			gpios = <&fan_leds 10 GPIO_ACTIVE_HIGH>;
 		};
 		fan3_blue {
 			retain-state-shutdown;
 			default-state = "on";
-			gpios = <&fan_ioexp 11 GPIO_ACTIVE_HIGH>;
+			gpios = <&fan_leds 11 GPIO_ACTIVE_HIGH>;
 		};
 		fan0_amber {
 			retain-state-shutdown;
 			default-state = "off";
-			gpios = <&fan_ioexp 12 GPIO_ACTIVE_HIGH>;
+			gpios = <&fan_leds 12 GPIO_ACTIVE_HIGH>;
 		};
 		fan1_amber {
 			retain-state-shutdown;
 			default-state = "off";
-			gpios = <&fan_ioexp 13 GPIO_ACTIVE_HIGH>;
+			gpios = <&fan_leds 13 GPIO_ACTIVE_HIGH>;
 		};
 		fan2_amber {
 			retain-state-shutdown;
 			default-state = "off";
-			gpios = <&fan_ioexp 14 GPIO_ACTIVE_HIGH>;
+			gpios = <&fan_leds 14 GPIO_ACTIVE_HIGH>;
 		};
 		fan3_amber {
 			retain-state-shutdown;
 			default-state = "off";
-			gpios = <&fan_ioexp 15 GPIO_ACTIVE_HIGH>;
-		};
-		sled0_amber {
-			retain-state-shutdown;
-			default-state = "off";
-			gpios = <&sled0_leds 0 GPIO_ACTIVE_LOW>;
-		};
-		sled0_blue {
-			retain-state-shutdown;
-			default-state = "off";
-			gpios = <&sled0_leds 1 GPIO_ACTIVE_LOW>;
+			gpios = <&fan_leds 15 GPIO_ACTIVE_HIGH>;
 		};
+	};
+
+	sled1_gpio_leds {
+		compatible = "gpio-leds";
 		sled1_amber {
 			retain-state-shutdown;
-			default-state = "off";
+			default-state = "keep";
 			gpios = <&sled1_leds 0 GPIO_ACTIVE_LOW>;
 		};
 		sled1_blue {
 			retain-state-shutdown;
-			default-state = "off";
+			default-state = "keep";
 			gpios = <&sled1_leds 1 GPIO_ACTIVE_LOW>;
 		};
+	};
+
+	sled2_gpio_leds {
+		compatible = "gpio-leds";
 		sled2_amber {
 			retain-state-shutdown;
-			default-state = "off";
+			default-state = "keep";
 			gpios = <&sled2_leds 0 GPIO_ACTIVE_LOW>;
 		};
 		sled2_blue {
 			retain-state-shutdown;
-			default-state = "off";
+			default-state = "keep";
 			gpios = <&sled2_leds 1 GPIO_ACTIVE_LOW>;
 		};
+	};
+
+	sled3_gpio_leds {
+		compatible = "gpio-leds";
 		sled3_amber {
 			retain-state-shutdown;
-			default-state = "off";
+			default-state = "keep";
 			gpios = <&sled3_leds 0 GPIO_ACTIVE_LOW>;
 		};
 		sled3_blue {
 			retain-state-shutdown;
-			default-state = "off";
+			default-state = "keep";
 			gpios = <&sled3_leds 1 GPIO_ACTIVE_LOW>;
 		};
+	};
+
+	sled4_gpio_leds {
+		compatible = "gpio-leds";
 		sled4_amber {
 			retain-state-shutdown;
-			default-state = "off";
+			default-state = "keep";
 			gpios = <&sled4_leds 0 GPIO_ACTIVE_LOW>;
 		};
 		sled4_blue {
 			retain-state-shutdown;
-			default-state = "off";
+			default-state = "keep";
 			gpios = <&sled4_leds 1 GPIO_ACTIVE_LOW>;
 		};
+	};
+
+	sled5_gpio_leds {
+		compatible = "gpio-leds";
 		sled5_amber {
 			retain-state-shutdown;
-			default-state = "off";
+			default-state = "keep";
 			gpios = <&sled5_leds 0 GPIO_ACTIVE_LOW>;
 		};
 		sled5_blue {
 			retain-state-shutdown;
-			default-state = "off";
+			default-state = "keep";
 			gpios = <&sled5_leds 1 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	sled6_gpio_leds {
+		compatible = "gpio-leds";
+		sled6_amber {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled6_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled6_blue {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled6_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
 };
 
 &mac2 {
@@ -177,10 +206,6 @@
 	};
 };
 
-&rtc {
-	status = "okay";
-};
-
 &fmc {
 	status = "okay";
 	flash@0 {
@@ -190,6 +215,12 @@
 		spi-max-frequency = <50000000>;
 #include "openbmc-flash-layout-128.dtsi"
 	};
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "flash1";
+		spi-max-frequency = <50000000>;
+	};
 };
 
 &spi2 {
@@ -201,13 +232,17 @@
 		status = "okay";
 		m25p,fast-read;
 		label = "pnor";
-		spi-max-frequency = <100000000>;
+		spi-max-frequency = <50000000>;
 	};
 };
 
 &i2c0 {
 	status = "okay";
-	/* TODO: Add ADC INA230 */
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
 
 	mp5023@40 {
 		compatible = "mps,mp5023";
@@ -219,7 +254,18 @@
 		reg = <0x4f>;
 	};
 
-	sled0_ioexp: pca9539@76 {
+	sled1_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED1_SWD_MUX", "SLED1_XRES_SWD_N",
+		"SLED1_CLKREQ_N", "SLED1_PCIE_PWR_EN";
+	};
+
+	sled1_ioexp: pca9539@76 {
 		compatible = "nxp,pca9539";
 		reg = <0x76>;
 		#address-cells = <1>;
@@ -227,14 +273,17 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 0) IRQ_TYPE_LEVEL_LOW>;
+
 		gpio-line-names =
-		"SLED0_MS_DETECT1","SLED0_VBUS_BMC_EN","SLED0_INA230_ALERT","SLED0_P12V_STBY_ALERT",
-		"SLED0_SSD_ALERT","SLED0_MS_DETECT0","SLED0_RST_CCG5","SLED0_FUSB302_INT",
-		"SLED0_MD_STBY_RESET","SLED0_MD_IOEXP_EN_FAULT","SLED0_MD_DIR","SLED0_MD_DECAY",
-		"SLED0_MD_MODE1","SLED0_MD_MODE2","SLED0_MD_MODE3","power-host0";
+		"SLED1_MS_DETECT1","SLED1_VBUS_BMC_EN","SLED1_INA230_ALERT","SLED1_P12V_STBY_ALERT",
+		"SLED1_SSD_ALERT","SLED1_MS_DETECT0","SLED1_RST_CCG5","SLED1_FUSB302_INT",
+		"SLED1_MD_STBY_RESET","SLED1_MD_IOEXP_EN_FAULT","SLED1_MD_DIR","SLED1_MD_DECAY",
+		"SLED1_MD_MODE1","SLED1_MD_MODE2","SLED1_MD_MODE3","power-host1";
 	};
 
-	sled0_leds: pca9552@67 {
+	sled1_leds: pca9552@67 {
 		compatible = "nxp,pca9552";
 		reg = <0x67>;
 		#address-cells = <1>;
@@ -243,13 +292,13 @@
 		#gpio-cells = <2>;
 
 		gpio-line-names =
-		"led-sled0-amber","led-sled0-blue","SLED0_RST_IOEXP","",
+		"led-sled1-amber","led-sled1-blue","SLED1_RST_IOEXP","SLED1_MD_REF_PWM",
 		"","","","",
 		"","","","",
 		"","","","";
 	};
 
-	sled0_fusb302: typec-portc@22 {
+	sled1_fusb302: typec-portc@22 {
 		compatible = "fcs,fusb302";
 		reg = <0x22>;
 
@@ -266,11 +315,20 @@
 			op-sink-microwatt = <10000000>;
 		};
 	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
 };
 
 &i2c1 {
 	status = "okay";
-	/* TODO: Add ADC INA230 */
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
 
 	mp5023@40 {
 		compatible = "mps,mp5023";
@@ -282,7 +340,18 @@
 		reg = <0x4f>;
 	};
 
-	sled1_ioexp: pca9539@76 {
+	sled2_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED2_SWD_MUX", "SLED2_XRES_SWD_N",
+		"SLED2_CLKREQ_N", "SLED2_PCIE_PWR_EN";
+	};
+
+	sled2_ioexp: pca9539@76 {
 		compatible = "nxp,pca9539";
 		reg = <0x76>;
 		#address-cells = <1>;
@@ -290,14 +359,17 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 1) IRQ_TYPE_LEVEL_LOW>;
+
 		gpio-line-names =
-		"SLED1_MS_DETECT1","SLED1_VBUS_BMC_EN","SLED1_INA230_ALERT","SLED1_P12V_STBY_ALERT",
-		"SLED1_SSD_ALERT","SLED1_MS_DETECT0","SLED1_RST_CCG5","SLED1_FUSB302_INT",
-		"SLED1_MD_STBY_RESET","SLED1_MD_IOEXP_EN_FAULT","SLED1_MD_DIR","SLED1_MD_DECAY",
-		"SLED1_MD_MODE1","SLED1_MD_MODE2","SLED1_MD_MODE3","power-host1";
+		"SLED2_MS_DETECT1","SLED2_VBUS_BMC_EN","SLED2_INA230_ALERT","SLED2_P12V_STBY_ALERT",
+		"SLED2_SSD_ALERT","SLED2_MS_DETECT0","SLED2_RST_CCG5","SLED2_FUSB302_INT",
+		"SLED2_MD_STBY_RESET","SLED2_MD_IOEXP_EN_FAULT","SLED2_MD_DIR","SLED2_MD_DECAY",
+		"SLED2_MD_MODE1","SLED2_MD_MODE2","SLED2_MD_MODE3","power-host2";
 	};
 
-	sled1_leds: pca9552@67 {
+	sled2_leds: pca9552@67 {
 		compatible = "nxp,pca9552";
 		reg = <0x67>;
 		#address-cells = <1>;
@@ -306,13 +378,13 @@
 		#gpio-cells = <2>;
 
 		gpio-line-names =
-		"led-sled1-amber","led-sled1-blue","SLED1_RST_IOEXP","",
+		"led-sled2-amber","led-sled2-blue","SLED2_RST_IOEXP","SLED2_MD_REF_PWM",
 		"","","","",
 		"","","","",
 		"","","","";
 	};
 
-	sled1_fusb302: typec-portc@22 {
+	sled2_fusb302: typec-portc@22 {
 		compatible = "fcs,fusb302";
 		reg = <0x22>;
 
@@ -329,15 +401,20 @@
 			op-sink-microwatt = <10000000>;
 		};
 	};
-};
 
-&i2c1 {
-	status = "okay";
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
 };
 
 &i2c2 {
 	status = "okay";
-	/* TODO: Add ADC INA230 */
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
 
 	mp5023@40 {
 		compatible = "mps,mp5023";
@@ -349,7 +426,18 @@
 		reg = <0x4f>;
 	};
 
-	sled2_ioexp: pca9539@76 {
+	sled3_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED3_SWD_MUX", "SLED3_XRES_SWD_N",
+		"SLED3_CLKREQ_N", "SLED3_PCIE_PWR_EN";
+	};
+
+	sled3_ioexp: pca9539@76 {
 		compatible = "nxp,pca9539";
 		reg = <0x76>;
 		#address-cells = <1>;
@@ -357,14 +445,17 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 2) IRQ_TYPE_LEVEL_LOW>;
+
 		gpio-line-names =
-		"SLED2_MS_DETECT1","SLED2_VBUS_BMC_EN","SLED2_INA230_ALERT","SLED2_P12V_STBY_ALERT",
-		"SLED2_SSD_ALERT","SLED2_MS_DETECT0","SLED2_RST_CCG5","SLED2_FUSB302_INT",
-		"SLED2_MD_STBY_RESET","SLED2_MD_IOEXP_EN_FAULT","SLED2_MD_DIR","SLED2_MD_DECAY",
-		"SLED2_MD_MODE1","SLED2_MD_MODE2","SLED2_MD_MODE3","power-host2";
+		"SLED3_MS_DETECT1","SLED3_VBUS_BMC_EN","SLED3_INA230_ALERT","SLED3_P12V_STBY_ALERT",
+		"SLED3_SSD_ALERT","SLED3_MS_DETECT0","SLED3_RST_CCG5","SLED3_FUSB302_INT",
+		"SLED3_MD_STBY_RESET","SLED3_MD_IOEXP_EN_FAULT","SLED3_MD_DIR","SLED3_MD_DECAY",
+		"SLED3_MD_MODE1","SLED3_MD_MODE2","SLED3_MD_MODE3","power-host3";
 	};
 
-	sled2_leds: pca9552@67 {
+	sled3_leds: pca9552@67 {
 		compatible = "nxp,pca9552";
 		reg = <0x67>;
 		#address-cells = <1>;
@@ -373,13 +464,13 @@
 		#gpio-cells = <2>;
 
 		gpio-line-names =
-		"led-sled2-amber","led-sled2-blue","SLED2_RST_IOEXP","",
+		"led-sled3-amber","led-sled3-blue","SLED3_RST_IOEXP","SLED3_MD_REF_PWM",
 		"","","","",
 		"","","","",
 		"","","","";
 	};
 
-	sled2_fusb302: typec-portc@22 {
+	sled3_fusb302: typec-portc@22 {
 		compatible = "fcs,fusb302";
 		reg = <0x22>;
 
@@ -396,11 +487,20 @@
 			op-sink-microwatt = <10000000>;
 		};
 	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
 };
 
 &i2c3 {
 	status = "okay";
-	/* TODO: Add ADC INA230 */
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
 
 	mp5023@40 {
 		compatible = "mps,mp5023";
@@ -412,7 +512,18 @@
 		reg = <0x4f>;
 	};
 
-	sled3_ioexp: pca9539@76 {
+	sled4_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED4_SWD_MUX", "SLED4_XRES_SWD_N",
+		"SLED4_CLKREQ_N", "SLED4_PCIE_PWR_EN";
+	};
+
+	sled4_ioexp: pca9539@76 {
 		compatible = "nxp,pca9539";
 		reg = <0x76>;
 		#address-cells = <1>;
@@ -420,14 +531,17 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 3) IRQ_TYPE_LEVEL_LOW>;
+
 		gpio-line-names =
-		"SLED3_MS_DETECT1","SLED3_VBUS_BMC_EN","SLED3_INA230_ALERT","SLED3_P12V_STBY_ALERT",
-		"SLED3_SSD_ALERT","SLED3_MS_DETECT0","SLED3_RST_CCG5","SLED3_FUSB302_INT",
-		"SLED3_MD_STBY_RESET","SLED3_MD_IOEXP_EN_FAULT","SLED3_MD_DIR","SLED3_MD_DECAY",
-		"SLED3_MD_MODE1","SLED3_MD_MODE2","SLED3_MD_MODE3","power-host3";
+		"SLED4_MS_DETECT1","SLED4_VBUS_BMC_EN","SLED4_INA230_ALERT","SLED4_P12V_STBY_ALERT",
+		"SLED4_SSD_ALERT","SLED4_MS_DETECT0","SLED4_RST_CCG5","SLED4_FUSB302_INT",
+		"SLED4_MD_STBY_RESET","SLED4_MD_IOEXP_EN_FAULT","SLED4_MD_DIR","SLED4_MD_DECAY",
+		"SLED4_MD_MODE1","SLED4_MD_MODE2","SLED4_MD_MODE3","power-host4";
 	};
 
-	sled3_leds: pca9552@67 {
+	sled4_leds: pca9552@67 {
 		compatible = "nxp,pca9552";
 		reg = <0x67>;
 		#address-cells = <1>;
@@ -436,13 +550,13 @@
 		#gpio-cells = <2>;
 
 		gpio-line-names =
-		"led-sled3-amber","led-sled3-blue","SLED3_RST_IOEXP","",
+		"led-sled4-amber","led-sled4-blue","SLED4_RST_IOEXP","SLED4_MD_REF_PWM",
 		"","","","",
 		"","","","",
 		"","","","";
 	};
 
-	sled3_fusb302: typec-portc@22 {
+	sled4_fusb302: typec-portc@22 {
 		compatible = "fcs,fusb302";
 		reg = <0x22>;
 
@@ -459,11 +573,20 @@
 			op-sink-microwatt = <10000000>;
 		};
 	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
 };
 
 &i2c4 {
 	status = "okay";
-	/* TODO: Add ADC INA230 */
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
 
 	mp5023@40 {
 		compatible = "mps,mp5023";
@@ -475,7 +598,18 @@
 		reg = <0x4f>;
 	};
 
-	sled4_ioexp: pca9539@76 {
+	sled5_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED5_SWD_MUX", "SLED5_XRES_SWD_N",
+		"SLED5_CLKREQ_N", "SLED5_PCIE_PWR_EN";
+	};
+
+	sled5_ioexp: pca9539@76 {
 		compatible = "nxp,pca9539";
 		reg = <0x76>;
 		#address-cells = <1>;
@@ -483,14 +617,17 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 4) IRQ_TYPE_LEVEL_LOW>;
+
 		gpio-line-names =
-		"SLED4_MS_DETECT1","SLED4_VBUS_BMC_EN","SLED4_INA230_ALERT","SLED4_P12V_STBY_ALERT",
-		"SLED4_SSD_ALERT","SLED4_MS_DETECT0","SLED4_RST_CCG5","SLED4_FUSB302_INT",
-		"SLED4_MD_STBY_RESET","SLED4_MD_IOEXP_EN_FAULT","SLED4_MD_DIR","SLED4_MD_DECAY",
-		"SLED4_MD_MODE1","SLED4_MD_MODE2","SLED4_MD_MODE3","power-host4";
+		"SLED5_MS_DETECT1","SLED5_VBUS_BMC_EN","SLED5_INA230_ALERT","SLED5_P12V_STBY_ALERT",
+		"SLED5_SSD_ALERT","SLED5_MS_DETECT0","SLED5_RST_CCG5","SLED5_FUSB302_INT",
+		"SLED5_MD_STBY_RESET","SLED5_MD_IOEXP_EN_FAULT","SLED5_MD_DIR","SLED5_MD_DECAY",
+		"SLED5_MD_MODE1","SLED5_MD_MODE2","SLED5_MD_MODE3","power-host5";
 	};
 
-	sled4_leds: pca9552@67 {
+	sled5_leds: pca9552@67 {
 		compatible = "nxp,pca9552";
 		reg = <0x67>;
 		#address-cells = <1>;
@@ -499,13 +636,13 @@
 		#gpio-cells = <2>;
 
 		gpio-line-names =
-		"led-sled4-amber","led-sled4-blue","SLED4_RST_IOEXP","",
+		"led-sled5-amber","led-sled5-blue","SLED5_RST_IOEXP","SLED5_MD_REF_PWM",
 		"","","","",
 		"","","","",
 		"","","","";
 	};
 
-	sled4_fusb302: typec-portc@22 {
+	sled5_fusb302: typec-portc@22 {
 		compatible = "fcs,fusb302";
 		reg = <0x22>;
 
@@ -522,11 +659,20 @@
 			op-sink-microwatt = <10000000>;
 		};
 	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
 };
 
 &i2c5 {
 	status = "okay";
-	/* TODO: Add ADC INA230 */
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
 
 	mp5023@40 {
 		compatible = "mps,mp5023";
@@ -538,7 +684,18 @@
 		reg = <0x4f>;
 	};
 
-	sled5_ioexp: pca9539@76 {
+	sled6_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED6_SWD_MUX", "SLED6_XRES_SWD_N",
+		"SLED6_CLKREQ_N", "SLED6_PCIE_PWR_EN";
+	};
+
+	sled6_ioexp: pca9539@76 {
 		compatible = "nxp,pca9539";
 		reg = <0x76>;
 		#address-cells = <1>;
@@ -546,14 +703,17 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 5) IRQ_TYPE_LEVEL_LOW>;
+
 		gpio-line-names =
-		"SLED5_MS_DETECT1","SLED5_VBUS_BMC_EN","SLED5_INA230_ALERT","SLED5_P12V_STBY_ALERT",
-		"SLED5_SSD_ALERT","SLED5_MS_DETECT0","SLED5_RST_CCG5","SLED5_FUSB302_INT",
-		"SLED5_MD_STBY_RESET","SLED5_MD_IOEXP_EN_FAULT","SLED5_MD_DIR","SLED5_MD_DECAY",
-		"SLED5_MD_MODE1","SLED5_MD_MODE2","SLED5_MD_MODE3","power-host5";
+		"SLED6_MS_DETECT1","SLED6_VBUS_BMC_EN","SLED6_INA230_ALERT","SLED6_P12V_STBY_ALERT",
+		"SLED6_SSD_ALERT","SLED6_MS_DETECT0","SLED6_RST_CCG5","SLED6_FUSB302_INT",
+		"SLED6_MD_STBY_RESET","SLED6_MD_IOEXP_EN_FAULT","SLED6_MD_DIR","SLED6_MD_DECAY",
+		"SLED6_MD_MODE1","SLED6_MD_MODE2","SLED6_MD_MODE3","power-host6";
 	};
 
-	sled5_leds: pca9552@67 {
+	sled6_leds: pca9552@67 {
 		compatible = "nxp,pca9552";
 		reg = <0x67>;
 		#address-cells = <1>;
@@ -562,13 +722,13 @@
 		#gpio-cells = <2>;
 
 		gpio-line-names =
-		"led-sled5-amber","led-sled5-blue","SLED5_RST_IOEXP","",
+		"led-sled6-amber","led-sled6-blue","SLED6_RST_IOEXP","SLED6_MD_REF_PWM",
 		"","","","",
 		"","","","",
 		"","","","";
 	};
 
-	sled5_fusb302: typec-portc@22 {
+	sled6_fusb302: typec-portc@22 {
 		compatible = "fcs,fusb302";
 		reg = <0x22>;
 
@@ -585,6 +745,11 @@
 			op-sink-microwatt = <10000000>;
 		};
 	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
 };
 
 &i2c6 {
@@ -596,6 +761,7 @@
 	};
 
 	rtc@51 {
+		/* in-chip rtc disabled, use external rtc (battery-backed) */
 		compatible = "nxp,pcf85263";
 		reg = <0x51>;
 	};
@@ -627,11 +793,6 @@
 		reg = <0x4f>;
 	};
 
-	hdc1080@40 {
-		compatible = "ti,hdc1080";
-		reg = <0x40>;
-	};
-
 	front_leds: pca9552@67 {
 		compatible = "nxp,pca9552";
 		reg = <0x67>;
@@ -655,6 +816,9 @@
 	adm1278@11 {
 		compatible = "adi,adm1278";
 		reg = <0x11>;
+		shunt-resistor-micro-ohms = <300>;
+		adi,volt-curr-sample-average = <128>;
+		adi,power-sample-average = <128>;
 	};
 
 	tmp421@4c {
@@ -667,7 +831,7 @@
 		reg = <0x4d>;
 	};
 
-	fan_ioexp: pca9552@67 {
+	fan_leds: pca9552@67 {
 		compatible = "nxp,pca9552";
 		reg = <0x67>;
 		#address-cells = <1>;
@@ -689,47 +853,68 @@
 	multi-master;
 	aspeed,hw-timeout-ms = <1000>;
 	status = "okay";
+
+	//USB Debug Connector
+	ipmb13@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
 };
 
 &gpio0 {
 	gpio-line-names =
 	/*A0-A7*/	"","","","","","","","",
-	/*B0-B7*/	"","","SEL_SPI2_MUX","SPI2_MUX1",
-			"SPI2_MUX2","SPI2_MUX3","","",
+	/*B0-B7*/	"FUSB302_SLED1_INT_N","FUSB302_SLED2_INT_N",
+			"SEL_SPI2_MUX","SPI2_MUX1",
+			"SPI2_MUX2","SPI2_MUX3",
+			"","FUSB302_SLED3_INT_N",
 	/*C0-C7*/	"","","","","","","","",
 	/*D0-D7*/	"","","","","","","","",
 	/*E0-E7*/	"","","","","","","","",
-	/*F0-F7*/	"","","","","","","","",
-	/*G0-G7*/	"","SWITCH_FRU_MUX","","","","","","",
+	/*F0-F7*/	"BMC_SLED1_STCK","BMC_SLED2_STCK",
+			"BMC_SLED3_STCK","BMC_SLED4_STCK",
+			"BMC_SLED5_STCK","BMC_SLED6_STCK",
+			"","",
+	/*G0-G7*/	"BSM_FRU_WP","SWITCH_FRU_MUX","","FM_SOL_UART_CH_SEL",
+			"PWRGD_P1V05_VDDCORE","PWRGD_P1V5_VDD","","",
 	/*H0-H7*/	"presence-riser1","presence-riser2",
-			"presence-sled0","presence-sled1",
-			"presence-sled2","presence-sled3",
-			"presence-sled4","presence-sled5",
-	/*I0-I7*/	"REV_ID0","","REV_ID1","REV_ID2",
-			"","","","",
+			"presence-sled1","presence-sled2",
+			"presence-sled3","presence-sled4",
+			"presence-sled5","presence-sled6",
+	/*I0-I7*/	"REV_ID0","",
+			"REV_ID1","REV_ID2",
+			"","BSM_FLASH_WP_STATUS",
+			"BMC_TPM_PRES_N","FUSB302_SLED6_INT_N",
 	/*J0-J7*/	"","","","","","","","",
 	/*K0-K7*/	"","","","","","","","",
-	/*L0-L7*/	"","","","","","","","",
-	/*M0-M7*/	"ALERT_SLED0","ALERT_SLED1",
-			"ALERT_SLED2","ALERT_SLED3",
-			"ALERT_SLED4","ALERT_SLED5",
-			"P12V_AUX_ALERT1","",
-	/*N0-N7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","BMC_RTC_INT","","",
+	/*M0-M7*/	"ALERT_SLED1_N","ALERT_SLED2_N",
+			"ALERT_SLED3_N","ALERT_SLED4_N",
+			"ALERT_SLED5_N","ALERT_SLED6_N",
+			"","",
+	/*N0-N7*/	"LED_POSTCODE_0","LED_POSTCODE_1",
+			"LED_POSTCODE_2","LED_POSTCODE_3",
+			"LED_POSTCODE_4","LED_POSTCODE_5",
+			"LED_POSTCODE_5","LED_POSTCODE_7",
 	/*O0-O7*/	"","","","",
 			"","BOARD_ID0","BOARD_ID1","BOARD_ID2",
-	/*P0-P7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","BMC_HEARTBEAT",
 	/*Q0-Q7*/	"","","","","","","","",
 	/*R0-R7*/	"","","","","","","","",
 	/*S0-S7*/	"","","","BAT_DETECT",
-			"BMC_BT_WP0","BMC_BT_WP1","","",
+			"BMC_BT_WP0_N","BMC_BT_WP1_N","","FUSB302_SLED4_INT_N",
 	/*T0-T7*/	"","","","","","","","",
 	/*U0-U7*/	"","","","","","","","",
-	/*V0-V7*/	"","RST_BMC_MVL","","",
+	/*V0-V7*/	"PWRGD_CNS_PSU","RST_BMC_MVL_N",
+			"P12V_AUX_ALERT1_N","PSU_PRSNT",
 			"USB2_SEL0_A","USB2_SEL1_A",
 			"USB2_SEL0_B","USB2_SEL1_B",
-	/*W0-W7*/	"RST_FRONT_IOEXP","","","","","","","",
+	/*W0-W7*/	"RST_FRONT_IOEXP_N","","","","","","","",
 	/*X0-X7*/	"","","","","","","","",
-	/*Y0-Y7*/	"","","BSM_FLASH_LATCH","","","","","",
+	/*Y0-Y7*/	"BMC_SELF_HW_RST","BSM_PRSNT_N",
+			"BSM_FLASH_LATCH_N","FUSB302_SLED5_INT_N",
+			"","","","",
 	/*Z0-Z7*/	"","","","","","","","";
 };
 
@@ -754,3 +939,17 @@
 		&pinctrl_adc12_default &pinctrl_adc13_default
 		&pinctrl_adc14_default &pinctrl_adc15_default>;
 };
+
+&mdio0 {
+	status = "okay";
+	/* TODO: Add Marvell 88E6191X */
+};
+
+&mdio3 {
+	status = "okay";
+	/* TODO: Add Marvell 88X3310 */
+};
+
+&ehci0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts
index 27b43fe099f1..8e1a1d1b282d 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts
@@ -183,3 +183,21 @@
 &i2c11 {
 	status = "okay";
 };
+
+/*
+ * BMC's "mac3" controller is connected to BCM53134P's IMP_RGMII port
+ * directly (fixed link, no PHY in between).
+ * Note: BMC's "mdio0" controller is connected to BCM53134P's MDIO
+ * interface, and the MDIO channel will be enabled in dts later, when
+ * BCM53134 is added to "bcm53xx" DSA driver.
+ */
+&mac3 {
+	status = "okay";
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii4_default>;
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
index 8864e9c312a8..6bf2ff85a40e 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
@@ -207,11 +207,16 @@
 
 &i2c12 {
 	status = "okay";
-	//MEZZ_FRU
-	eeprom@51 {
-		compatible = "atmel,24c64";
-		reg = <0x51>;
-		pagesize = <32>;
+};
+
+&i2c13 {
+	status = "okay";
+	// Debug Card
+	multi-master;
+	ipmb13@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
 	};
 };
 
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
index 22c06ff7a7ed..a6a2bc3b855c 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
@@ -171,9 +171,10 @@
 		/* 48MB region from the end of flash to start of vga memory */
 		ramoops@bc000000 {
 			compatible = "ramoops";
-			reg = <0xbc000000 0x180000>; /* 16 * (3 * 0x8000) */
+			reg = <0xbc000000 0x200000>; /* 16 * (4 * 0x8000) */
 			record-size = <0x8000>;
 			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
 			pmsg-size = <0x8000>;
 			max-reason = <3>; /* KMSG_DUMP_EMERG */
 		};
@@ -188,29 +189,27 @@
 
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <1000>;
 
-		fan0-presence {
+		event-fan0-presence {
 			label = "fan0-presence";
 			gpios = <&pca0 15 GPIO_ACTIVE_LOW>;
 			linux,code = <15>;
 		};
 
-		fan1-presence {
+		event-fan1-presence {
 			label = "fan1-presence";
 			gpios = <&pca0 14 GPIO_ACTIVE_LOW>;
 			linux,code = <14>;
 		};
 
-		fan2-presence {
+		event-fan2-presence {
 			label = "fan2-presence";
 			gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
 			linux,code = <13>;
 		};
 
-		fan3-presence {
+		event-fan3-presence {
 			label = "fan3-presence";
 			gpios = <&pca0 12 GPIO_ACTIVE_LOW>;
 			linux,code = <12>;
@@ -269,9 +268,7 @@
 	/*C0-C7*/	"","","","","","","","",
 	/*D0-D7*/	"","","","","","","","",
 	/*E0-E7*/	"","","","","","","","",
-	/*F0-F7*/	"PIN_HOLE_RESET_IN_N","","",
-				"PIN_HOLE_RESET_OUT_N","","",
-				"factory-reset-toggle","",
+	/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","factory-reset-toggle","",
 	/*G0-G7*/	"","","","","","","","",
 	/*H0-H7*/	"led-rtc-battery","led-bmc","led-rear-enc-id0","led-rear-enc-fault0","","","","",
 	/*I0-I7*/	"","","","","","","bmc-secure-boot","",
@@ -284,7 +281,7 @@
 	/*P0-P7*/	"","","","","led-pcieslot-power","","","",
 	/*Q0-Q7*/	"","","regulator-standby-faulted","","","","","",
 	/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","I2C_FLASH_MICRO_N","","",
-	/*S0-S7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","power-ffs-sync-history","","","",
 	/*T0-T7*/	"","","","","","","","",
 	/*U0-U7*/	"","","","","","","","",
 	/*V0-V7*/	"","BMC_3RESTART_ATTEMPT_P","","","","","","",
@@ -2394,6 +2391,10 @@
 	status = "okay";
 };
 
+&uhci {
+	status = "okay";
+};
+
 &emmc_controller {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index c47974219832..bf59a9962379 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -102,9 +102,10 @@
 
 		ramoops@bc000000 {
 			compatible = "ramoops";
-			reg = <0xbc000000 0x180000>; /* 16 * (3 * 0x8000) */
+			reg = <0xbc000000 0x200000>; /* 16 * (4 * 0x8000) */
 			record-size = <0x8000>;
 			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
 			pmsg-size = <0x8000>;
 			max-reason = <3>; /* KMSG_DUMP_EMERG */
 		};
@@ -178,41 +179,39 @@
 
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <1000>;
 
-		fan0-presence {
+		event-fan0-presence {
 			label = "fan0-presence";
 			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
 			linux,code = <6>;
 		};
 
-		fan1-presence {
+		event-fan1-presence {
 			label = "fan1-presence";
 			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
 			linux,code = <7>;
 		};
 
-		fan2-presence {
+		event-fan2-presence {
 			label = "fan2-presence";
 			gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
 			linux,code = <8>;
 		};
 
-		fan3-presence {
+		event-fan3-presence {
 			label = "fan3-presence";
 			gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
 			linux,code = <9>;
 		};
 
-		fan4-presence {
+		event-fan4-presence {
 			label = "fan4-presence";
 			gpios = <&pca0 10 GPIO_ACTIVE_LOW>;
 			linux,code = <10>;
 		};
 
-		fan5-presence {
+		event-fan5-presence {
 			label = "fan5-presence";
 			gpios = <&pca0 11 GPIO_ACTIVE_LOW>;
 			linux,code = <11>;
@@ -239,6 +238,10 @@
 	status = "okay";
 };
 
+&uhci {
+	status = "okay";
+};
+
 &gpio0 {
 	gpio-line-names =
 	/*A0-A7*/	"","","","","","","","",
@@ -246,7 +249,7 @@
 	/*C0-C7*/	"","","","","","","","",
 	/*D0-D7*/	"","","","","","","","",
 	/*E0-E7*/	"","","","","","","","",
-	/*F0-F7*/	"","","","","","","factory-reset-toggle","",
+	/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","factory-reset-toggle","",
 	/*G0-G7*/	"","","","","","","","",
 	/*H0-H7*/	"","bmc-ingraham0","rear-enc-id0","rear-enc-fault0","","","","",
 	/*I0-I7*/	"","","","","","","bmc-secure-boot","",
@@ -260,7 +263,7 @@
 	/*Q0-Q7*/	"cfam-reset","","regulator-standby-faulted","","","","","",
 	/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","",
 	/*S0-S7*/	"presence-ps0","presence-ps1","presence-ps2","presence-ps3",
-				"","","","",
+	"power-ffs-sync-history","","","",
 	/*T0-T7*/	"","","","","","","","",
 	/*U0-U7*/	"","","","","","","","",
 	/*V0-V7*/	"","","","","","","","",
@@ -2360,30 +2363,6 @@
 	use-ncsi;
 };
 
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-		spi-max-frequency = <50000000>;
-#include "openbmc-flash-layout-128.dtsi"
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "pnor";
-		spi-max-frequency = <100000000>;
-	};
-};
-
 &wdt1 {
 	aspeed,reset-type = "none";
 	aspeed,external-signal;
diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
index 60a39ea10ab1..208b0f094ed9 100644
--- a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
@@ -73,19 +73,19 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		checkstop {
+		event-checkstop {
 			label = "checkstop";
 			gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(B, 3)>;
 		};
 
-		ps0-presence {
+		event-ps0-presence {
 			label = "ps0-presence";
 			gpios = <&gpio ASPEED_GPIO(F, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(F, 0)>;
 		};
 
-		ps1-presence {
+		event-ps1-presence {
 			label = "ps1-presence";
 			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(F, 1)>;
@@ -97,49 +97,49 @@
 		compatible = "gpio-keys-polled";
 		poll-interval = <1000>;
 
-		fan0-presence {
+		event-fan0-presence {
 			label = "fan0-presence";
 			gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
 			linux,code = <1>;
 		};
 
-		fan1-presence {
+		event-fan1-presence {
 			label = "fan1-presence";
 			gpios = <&pca1 1 GPIO_ACTIVE_LOW>;
 			linux,code = <2>;
 		};
 
-		fan2-presence {
+		event-fan2-presence {
 			label = "fan2-presence";
 			gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
 			linux,code = <3>;
 		};
 
-		fan3-presence {
+		event-fan3-presence {
 			label = "fan3-presence";
 			gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
 			linux,code = <4>;
 		};
 
-		fan4-presence {
+		event-fan4-presence {
 			label = "fan4-presence";
 			gpios = <&pca1 4 GPIO_ACTIVE_LOW>;
 			linux,code = <5>;
 		};
 
-		fan5-presence {
+		event-fan5-presence {
 			label = "fan5-presence";
 			gpios = <&pca1 5 GPIO_ACTIVE_LOW>;
 			linux,code = <6>;
 		};
 
-		fan6-presence {
+		event-fan6-presence {
 			label = "fan6-presence";
 			gpios = <&pca1 6 GPIO_ACTIVE_LOW>;
 			linux,code = <7>;
 		};
 
-		fan7-presence {
+		event-fan7-presence {
 			label = "fan7-presence";
 			gpios = <&pca1 7 GPIO_ACTIVE_LOW>;
 			linux,code = <8>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
index a52a289cee85..48776fb663fb 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
@@ -92,30 +92,31 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		air-water {
+		event-air-water {
 			label = "air-water";
 			gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(F, 6)>;
 		};
 
-		checkstop {
+		event-checkstop {
 			label = "checkstop";
 			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(J, 2)>;
 		};
 
-		ps0-presence {
+		event-ps0-presence {
 			label = "ps0-presence";
 			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(Z, 2)>;
 		};
 
-		ps1-presence {
+		event-ps1-presence {
 			label = "ps1-presence";
 			gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(Z, 0)>;
 		};
-		id-button {
+
+		button-id {
 			label = "id-button";
 			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(F, 1)>;
@@ -126,37 +127,37 @@
 		compatible = "gpio-keys-polled";
 		poll-interval = <1000>;
 
-		fan0-presence {
+		event-fan0-presence {
 			label = "fan0-presence";
 			gpios = <&pca9552 9 GPIO_ACTIVE_LOW>;
 			linux,code = <9>;
 		};
 
-		fan1-presence {
+		event-fan1-presence {
 			label = "fan1-presence";
 			gpios = <&pca9552 10 GPIO_ACTIVE_LOW>;
 			linux,code = <10>;
 		};
 
-		fan2-presence {
+		event-fan2-presence {
 			label = "fan2-presence";
 			gpios = <&pca9552 11 GPIO_ACTIVE_LOW>;
 			linux,code = <11>;
 		};
 
-		fan3-presence {
+		event-fan3-presence {
 			label = "fan3-presence";
 			gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
 			linux,code = <12>;
 		};
 
-		fan4-presence {
+		event-fan4-presence {
 			label = "fan4-presence";
 			gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
 			linux,code = <13>;
 		};
 
-		fan5-presence {
+		event-fan5-presence {
 			label = "fan5-presence";
 			gpios = <&pca9552 14 GPIO_ACTIVE_LOW>;
 			linux,code = <14>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts
index 7d38d121ec6d..31ff19ef87a0 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts
@@ -46,31 +46,31 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		air-water {
+		event-air-water {
 			label = "air-water";
 			gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(F, 6)>;
 		};
 
-		checkstop {
+		event-checkstop {
 			label = "checkstop";
 			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(J, 2)>;
 		};
 
-		ps0-presence {
+		event-ps0-presence {
 			label = "ps0-presence";
 			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(Z, 2)>;
 		};
 
-		ps1-presence {
+		event-ps1-presence {
 			label = "ps1-presence";
 			gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(Z, 0)>;
 		};
 
-		id-button {
+		button-id {
 			label = "id-button";
 			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(F, 1)>;
@@ -81,31 +81,31 @@
 		compatible = "gpio-keys-polled";
 		poll-interval = <1000>;
 
-		fan0-presence {
+		event-fan0-presence {
 			label = "fan0-presence";
 			gpios = <&pca9552 9 GPIO_ACTIVE_LOW>;
 			linux,code = <9>;
 		};
 
-		fan1-presence {
+		event-fan1-presence {
 			label = "fan1-presence";
 			gpios = <&pca9552 10 GPIO_ACTIVE_LOW>;
 			linux,code = <10>;
 		};
 
-		fan2-presence {
+		event-fan2-presence {
 			label = "fan2-presence";
 			gpios = <&pca9552 11 GPIO_ACTIVE_LOW>;
 			linux,code = <11>;
 		};
 
-		fan3-presence {
+		event-fan3-presence {
 			label = "fan3-presence";
 			gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
 			linux,code = <12>;
 		};
 
-		fan4-presence {
+		event-fan4-presence {
 			label = "fan4-presence";
 			gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
 			linux,code = <13>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts b/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts
index 3d4bdad27c2d..ac0d666ca10e 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts
@@ -96,7 +96,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		checkstop {
+		event-checkstop {
 			label = "checkstop";
 			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(J, 2)>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
index cd660c1ff3f5..45631b47a7b3 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
@@ -73,7 +73,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		checkstop {
+		event-checkstop {
 			label = "checkstop";
 			gpios = <&gpio ASPEED_GPIO(P, 5) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(P, 5)>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
index 084f54866f38..893e621ecab1 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
@@ -87,7 +87,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		checkstop {
+		event-checkstop {
 			label = "checkstop";
 			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(J, 2)>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts b/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
index 4816486c0c9e..bbf864f84d37 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
@@ -38,37 +38,37 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		air-water {
+		event-air-water {
 			label = "air-water";
 			gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(B, 5)>;
 		};
 
-		checkstop {
+		event-checkstop {
 			label = "checkstop";
 			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(J, 2)>;
 		};
 
-		ps0-presence {
+		event-ps0-presence {
 			label = "ps0-presence";
 			gpios = <&gpio ASPEED_GPIO(R, 7) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(R, 7)>;
 		};
 
-		ps1-presence {
+		event-ps1-presence {
 			label = "ps1-presence";
 			gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(N, 0)>;
 		};
 
-		oppanel-presence {
+		event-oppanel-presence {
 			label = "oppanel-presence";
 			gpios = <&gpio ASPEED_GPIO(A, 7) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(A, 7)>;
 		};
 
-		opencapi-riser-presence {
+		event-opencapi-riser-presence {
 			label = "opencapi-riser-presence";
 			gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(I, 0)>;
@@ -84,55 +84,55 @@
 		compatible = "gpio-keys-polled";
 		poll-interval = <1000>;
 
-		scm0-presence {
+		event-scm0-presence {
 			label = "scm0-presence";
 			gpios = <&pca9552 6 GPIO_ACTIVE_LOW>;
 			linux,code = <6>;
 		};
 
-		scm1-presence {
+		event-scm1-presence {
 			label = "scm1-presence";
 			gpios = <&pca9552 7 GPIO_ACTIVE_LOW>;
 			linux,code = <7>;
 		};
 
-		cpu0vrm-presence {
+		event-cpu0vrm-presence {
 			label = "cpu0vrm-presence";
 			gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
 			linux,code = <12>;
 		};
 
-		cpu1vrm-presence {
+		event-cpu1vrm-presence {
 			label = "cpu1vrm-presence";
 			gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
 			linux,code = <13>;
 		};
 
-		fan0-presence {
+		event-fan0-presence {
 			label = "fan0-presence";
 			gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
 			linux,code = <5>;
 		};
 
-		fan1-presence {
+		event-fan1-presence {
 			label = "fan1-presence";
 			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
 			linux,code = <6>;
 		};
 
-		fan2-presence {
+		event-fan2-presence {
 			label = "fan2-presence";
 			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
 			linux,code = <7>;
 		};
 
-		fan3-presence {
+		event-fan3-presence {
 			label = "fan3-presence";
 			gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
 			linux,code = <8>;
 		};
 
-		fanboost-presence {
+		event-fanboost-presence {
 			label = "fanboost-presence";
 			gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
 			linux,code = <9>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
index e39f310d55eb..3f6010ef2b86 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
@@ -50,13 +50,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		ps0-presence {
+		event-ps0-presence {
 			label = "ps0-presence";
 			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(H, 3)>;
 		};
 
-		ps1-presence {
+		event-ps1-presence {
 			label = "ps1-presence";
 			gpios = <&gpio0 ASPEED_GPIO(E, 5) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(E, 5)>;
@@ -65,29 +65,27 @@
 
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <1000>;
 
-		fan0-presence {
+		event-fan0-presence {
 			label = "fan0-presence";
 			gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
 			linux,code = <4>;
 		};
 
-		fan1-presence {
+		event-fan1-presence {
 			label = "fan1-presence";
 			gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
 			linux,code = <5>;
 		};
 
-		fan2-presence {
+		event-fan2-presence {
 			label = "fan2-presence";
 			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
 			linux,code = <6>;
 		};
 
-		fan3-presence {
+		event-fan3-presence {
 			label = "fan3-presence";
 			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
 			linux,code = <7>;
@@ -197,7 +195,6 @@
 
 	fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
 	fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
-	cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
 
 	cfam@0,0 {
 		reg = <0 0>;
@@ -877,3 +874,14 @@
 	status = "okay";
 	memory-region = <&vga_memory>;
 };
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts b/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts
index 328ef472c479..8a7fb55ab489 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts
@@ -63,13 +63,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		button_checkstop {
+		event-checkstop {
 			label = "checkstop";
 			linux,code = <74>;
 			gpios = <&gpio ASPEED_GPIO(P, 5) GPIO_ACTIVE_LOW>;
 		};
 
-		button_identify {
+		event-identify {
 			label = "identify";
 			linux,code = <152>;
 			gpios = <&gpio ASPEED_GPIO(O, 7) GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
index 230f3584bcab..a20a532fc280 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
@@ -51,25 +51,25 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		air-water {
+		event-air-water {
 			label = "air-water";
 			gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(B, 5)>;
 		};
 
-		checkstop {
+		event-checkstop {
 			label = "checkstop";
 			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(J, 2)>;
 		};
 
-		ps0-presence {
+		event-ps0-presence {
 			label = "ps0-presence";
 			gpios = <&gpio ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(P, 7)>;
 		};
 
-		ps1-presence {
+		event-ps1-presence {
 			label = "ps1-presence";
 			gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(N, 0)>;
@@ -85,25 +85,25 @@
 		compatible = "gpio-keys-polled";
 		poll-interval = <1000>;
 
-		fan0-presence {
+		event-fan0-presence {
 			label = "fan0-presence";
 			gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
 			linux,code = <4>;
 		};
 
-		fan1-presence {
+		event-fan1-presence {
 			label = "fan1-presence";
 			gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
 			linux,code = <5>;
 		};
 
-		fan2-presence {
+		event-fan2-presence {
 			label = "fan2-presence";
 			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
 			linux,code = <6>;
 		};
 
-		fan3-presence {
+		event-fan3-presence {
 			label = "fan3-presence";
 			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
 			linux,code = <7>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
index 7ae4ea0d2931..0cb7b20ff3ab 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
@@ -58,13 +58,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		checkstop {
+		event-checkstop {
 			label = "checkstop";
 			gpios = <&gpio ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(F, 7)>;
 		};
 
-		pcie-e2b-present{
+		event-pcie-e2b-present{
 			label = "pcie-e2b-present";
 			gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(E, 7)>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts b/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts
index 61bc74b423cf..a5e64ccc2b3a 100644
--- a/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts
@@ -24,17 +24,17 @@
 	leds {
 		compatible = "gpio-leds";
 		postcode0 {
-			label="BMC_UP";
+			label = "BMC_UP";
 			gpios = <&gpio ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 		postcode1 {
-			label="BMC_HB";
+			label = "BMC_HB";
 			gpios = <&gpio ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 		postcode2 {
-			label="FAULT";
+			label = "FAULT";
 			gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
 		};
 		// postcode3-7 are GPIOH3-H7
diff --git a/arch/arm/boot/dts/aspeed-bmc-qcom-dc-scm-v1.dts b/arch/arm/boot/dts/aspeed-bmc-qcom-dc-scm-v1.dts
new file mode 100644
index 000000000000..259ef3f54c5c
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-qcom-dc-scm-v1.dts
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+
+/ {
+	model = "Qualcomm DC-SCM V1 BMC";
+	compatible = "qcom,dc-scm-v1-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&mdio3 {
+	status = "okay";
+
+	ethphy3: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mac2 {
+	status = "okay";
+
+	/* Bootloader sets up the MAC to insert delay */
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy3>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii3_default>;
+};
+
+&mac3 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+
+	use-ncsi;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <133000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <133000000>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bios";
+		spi-max-frequency = <133000000>;
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"BMC_FLASH_MUX_SEL","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"BMC_FWSPI_RST_N","","GPIO_1_BMC_3V3","","","","","",
+	/*O0-O7*/	"JTAG_MUX_A","JTAG_MUX_B","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","SCMFPGA_SPARE_GPIO1_3V3",
+			"SCMFPGA_SPARE_GPIO2_3V3","SCMFPGA_SPARE_GPIO3_3V3",
+			"SCMFPGA_SPARE_GPIO4_3V3","SCMFPGA_SPARE_GPIO5_3V3",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"","","","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*A0-A7*/	"GPI_1_BMC_1V8","","","","","",
+			"SCMFPGA_SPARE_GPIO1_1V8","SCMFPGA_SPARE_GPIO2_1V8",
+	/*B0-B7*/	"SCMFPGA_SPARE_GPIO3_1V8","SCMFPGA_SPARE_GPIO4_1V8",
+			"SCMFPGA_SPARE_GPIO5_1V8","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","BMC_SPI1_RST_N","BIOS_FLASH_MUX_SEL","",
+			"","TPM2_PIRQ_N","TPM2_RST_N","",
+	/*E0-E7*/	"","","","","","","","";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&i2c14 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-quanta-s6q.dts b/arch/arm/boot/dts/aspeed-bmc-quanta-s6q.dts
new file mode 100644
index 000000000000..46cbba6305b8
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-quanta-s6q.dts
@@ -0,0 +1,610 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2022 Quanta Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Quanta S6Q BMC";
+	compatible = "quanta,s6q-bmc", "aspeed,ast2600";
+
+	aliases {
+		// bus 0
+		i2c20 = &SMB_HOST_DB2000_3V3AUX_SCL;
+		i2c21 = &U12_PCA9546_CH1;
+		i2c22 = &SMB_HOST_DB800_B_SCL;
+		i2c23 = &SMB_HOST_DB800_C_SCL;
+
+		// bus 1
+		i2c24 = &SMB_M2_P0_1V8AUX_SCL;
+		i2c25 = &SMB_M2_P1_1V8AUX_SCL;
+		i2c26 = &SMB_CPU_PIROM_3V3AUX_SCL;
+		i2c27 = &SMB_TEMP_3V3AUX_SCL;
+		i2c28 = &SMB_IPMB_3V3AUX_SSDSB_SCL;
+		i2c29 = &SMB_IPMB_3V3AUX_SCL;
+		i2c31 = &SMB_FB_SCL;
+
+		// bus 1 - Fan board
+		i2c32 = &SMB_IOEXP_SCL;
+		i2c33 = &SMB_PROGRAM_SCL;
+		i2c34 = &SMB_FB_SCL_CH2;
+		i2c35 = &SMB_FAN_SENSE_SCL;
+
+		// bus 6
+		i2c36 = &U197_PCA9546_CH0;
+		i2c37 = &U197_PCA9546_CH1;
+		i2c38 = &U197_PCA9546_CH2;
+		i2c39 = &U197_PCA9546_CH3;
+
+		//bus 7
+		i2c40 = &SMB_OCP_SFF_3V3AUX_SCL; //OCP1
+		i2c41 = &SMB_OCP_LFF_3V3AUX_SCL; //OCP2
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			<&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+			<&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		BMC_HEARTBEAT_N {
+			label = "BMC_HEARTBEAT_N";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		BMC_LED_STATUS_AMBER_N {
+			label = "BMC_LED_STATUS_AMBER_N";
+			gpios = <&gpio0 ASPEED_GPIO(S, 6) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		FM_ID_LED_N {
+			label = "FM_ID_LED_N";
+			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0 - A7*/	"", "", "", "", "", "", "", "",
+	/*B0 - B7*/	"", "", "", "", "", "", "", "",
+	/*C0 - C7*/	"", "", "", "", "", "", "", "",
+	/*D0 - D7*/	"", "", "", "", "", "", "", "",
+	/*E0 - E7*/	"", "", "", "", "", "", "", "",
+	/*F0 - F7*/	"PLTRST_N", "", "PWR_DEBUG_N", "", "", "", "", "",
+	/*G0 - G7*/	"", "", "", "", "", "", "", "",
+	/*H0 - H7*/	"", "", "", "", "", "", "", "",
+	/*I0 - I7*/	"", "", "", "", "", "", "", "",
+	/*J0 - J7*/	"", "", "", "", "", "", "", "",
+	/*K0 - K7*/	"", "", "", "", "", "", "", "",
+	/*L0 - L7*/	"", "", "", "", "PREQ_N", "TCK_MUX_SEL", "", "",
+	/*M0 - M7*/	"", "", "", "PWRGD_SYS_PWROK", "", "PRDY_N", "", "",
+	/*N0 - N7*/	"", "", "", "", "", "", "", "",
+	/*O0 - O7*/	"", "", "", "", "", "", "", "",
+	/*P0 - P7*/	"SYS_BMC_PWRBTN_R_N", "SYS_PWRBTN_N", "FM_MB_RST_BTN", "RST_BMC_RSTBTN_OUT_N", "", "", "", "",
+	/*Q0 - Q7*/	"", "", "", "", "", "", "", "",
+	/*R0 - R7*/	"", "", "", "", "", "", "", "",
+	/*S0 - S7*/	"", "", "", "FP_ID_BTN_SCM_N", "", "", "", "",
+	/*T0 - T7*/	"", "", "", "", "", "", "", "",
+	/*U0 - U7*/	"", "", "", "", "", "", "", "",
+	/*V0 - V7*/	"", "", "", "", "", "SMI", "", "",
+	/*W0 - W7*/	"", "", "", "", "", "", "", "",
+	/*X0 - X7*/	"", "", "", "", "", "", "", "",
+	/*Y0 - Y7*/	"", "", "", "", "", "", "", "",
+	/*Z0 - Z7*/	"FM_BMC_READY_N", "", "", "", "", "", "", "",
+	/*AA0 - AA7*/	"", "", "", "", "", "", "", "",
+	/*AB0 - AB7*/	"", "", "", "", "", "", "", "",
+	/*AC0 - AC7*/	"", "", "", "", "", "", "", "";
+};
+
+&sgpiom0 {
+	status = "okay";
+	ngpios = <128>;
+	bus-frequency = <48000>;
+	gpio-line-names =
+	/* SGPIO input lines */
+	/*IOA0-IOA7*/	"","", "SIO_POWER_GOOD","OA1", "XDP_PRST_N","", "","", "FM_SLPS3_PLD_N","", "FM_SLPS4_PLD_N","", "FM_BIOS_POST_CMPLT_BMC_N","", "FM_ADR_TRIGGER_N","OA7",
+	/*IOB0-IOB7*/	"FM_ADR_COMPLETE","", "FM_PMBUS_ALERT_B_EN","", "PSU0_PRESENT_N","", "PSU1_PRESENT_N","", "PSU0_VIN_BUF_GOOD","", "PSU01_VIN_BUF_GOOD","", "PWRGD_PS0_PWROK_R","", "PWRGD_PS1_PWROK_R","",
+	/*IOC0-IOC7*/	"PWRGD_PS_PWROK_PLD_R","", "CHASSIS_INTRUSION","", "BMC_MFG_MODE","", "FM_BMC_EN_DET_R","", "FM_ME_BT_DONE","", "CPU1_PRESENCE","", "CPU2_PRESENCE","", "IRQ_PSYS_CRIT_N","",
+	/*IOD0-IOD7*/	"","", "CPU1_THERMTRIP","", "CPU2_THERMTRIP","", "CPU1_MEM_THERM_EVENT","", "CPU2_MEM_THERM_EVENT","", "CPU1_VRHOT","", "CPU2_VRHOT","", "","",
+	/*IOE0-IOE7*/	"","", "CPU1_MEM_VRHOT","", "CPU2_MEM_VRHOT","", "","", "PCH_BMC_THERMTRIP","", "","", "","", "","",
+	/*IOF0-IOF7*/	"CPU_ERR0","", "CPU_ERR1","", "CPU_ERR2","", "","", "","", "CPU_CATERR","", "","", "","",
+	/*IOG0-IOG7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOH0-IOH7*/	"","", "FP_ID_BTN_R1_N","", "FP_RST_BTN_N","", "","", "","", "FP_PWR_BTN_PLD_N_R","", "","", "","",
+	/*IOI0-IOI7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOJ0-IOJ7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOK0-IOK7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOL0-IOL7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOM0-IOM7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*ION0-ION7*/	"","BMC_SW_HEARTBEAT_N_R", "","FP_LED_FAULT_N", "","FP_ID_LED_N", "","FM_BMC_RSTBTN_OUT_N", "","FM_THERMTRIP_DLY_LVC1_R_N", "","", "","RST_PCA9548_SENSOR_PLD_N", "","USB_OC1_REAR_N",
+	/*IOO0-IOO7*/	"","IRQ_TPM_SPI_N", "","", "","IRQ_PCH_SCI_WHEA_R_N", "","IRQ_BMC_PCH_NMI_R", "","H_CPU_NMI_LVC1_R_N", "","", "","", "","FM_JTAG_BMC_PLD_MUX_SEL",
+	/*IOP0-IOP7*/	"IP0","OP0", "","", "","", "","", "","", "","", "","", "IP7","OP7";
+};
+
+&adc0 {
+	vref = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&mdio2 {
+	status = "okay";
+
+	ethphy2: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mac2 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy2>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii3_default>;
+};
+
+&mac3 {
+	status = "okay";
+
+	phy-mode = "rmii";
+	use-ncsi;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2_default &pinctrl_spi2cs1_default
+		&pinctrl_spi2cs2_default>;
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi2:0";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&kcs1 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xCA0>;
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xCA8>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xCA2>;
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	non-removable;
+	bus-width = <4>;
+	max-frequency = <100000000>;
+};
+
+&vhub {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	U34_PWR_ADC@48 {
+		compatible = "ti,ads7830";
+		reg = <0x48>;
+	};
+
+	U35_PWR_ADC@4b {
+		compatible = "ti,ads7830";
+		reg = <0x4b>;
+	};
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		SMB_HOST_DB2000_3V3AUX_SCL: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		U12_PCA9546_CH1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		SMB_HOST_DB800_B_SCL: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		SMB_HOST_DB800_C_SCL: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	i2c-switch@59 {
+		compatible = "nxp,pca9848";
+		reg = <0x59>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		SMB_M2_P0_1V8AUX_SCL: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		SMB_M2_P1_1V8AUX_SCL: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		SMB_CPU_PIROM_3V3AUX_SCL: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		SMB_TEMP_3V3AUX_SCL: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			U163_tmp75@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+			U114_tmp75@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+		};
+
+		SMB_IPMB_3V3AUX_SSDSB_SCL: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			U4_tmp75@4c {
+				compatible = "ti,tmp75";
+				reg = <0x4c>;
+			};
+			U73_tmp75@4d {
+				compatible = "ti,tmp75";
+				reg = <0x4d>;
+			};
+		};
+
+		SMB_IPMB_3V3AUX_SCL: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			U190_fru@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+				pagesize = <32>;
+			};
+		};
+
+		SMB_FB_SCL: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			i2c-switch@77 {
+				compatible = "nxp,pca9546";
+				reg = <0x77>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				SMB_IOEXP_SCL: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				SMB_PROGRAM_SCL: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				SMB_FB_SCL_CH2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				SMB_FAN_SENSE_SCL: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+
+					Current_Meter_U2@45 {
+						compatible = "ti,ina219";
+						reg = <0x45>;
+						shunt-resistor = <1000>; /* = 1 mOhm */
+					};
+
+					Current_Meter_U3@44 {
+						compatible = "ti,ina219";
+						reg = <0x44>;
+						shunt-resistor = <1000>; /* = 1 mOhm */
+					};
+
+					TEMP_sensor_U2@4b {
+						compatible = "ti,tmp75";
+						reg = <0x4b>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	bus-frequency = <400000>;
+
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* MB FRU (U173) @ 0xA2 */
+	mb_fru: mb_fru@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	/* FP_U1 Inlet */
+	FP_U1_tmp75@4a {
+		compatible = "ti,tmp75";
+		reg = <0x4a>;
+	};
+
+	FP_U4_fru@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+
+	i2c-switch@77 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+
+		U197_PCA9546_CH0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		U197_PCA9546_CH1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			cpu0_pvccin@60 {
+				compatible = "isil,raa229004";
+				reg = <0x60>;
+			};
+
+			cpu0_pvccinfaon@61 {
+				compatible = "isil,isl69260";
+				reg = <0x61>;
+			};
+
+			cpu0_pvccd_hv@63 {
+				compatible = "isil,isl69260";
+				reg = <0x63>;
+			};
+		};
+
+		U197_PCA9546_CH2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			cpu1_pvccin@72 {
+				compatible = "isil,raa229004";
+				reg = <0x72>;
+			};
+
+			cpu1_pvccinfaon@74 {
+				compatible = "isil,isl69260";
+				reg = <0x74>;
+			};
+
+			cpu1_pvccd_hv@76 {
+				compatible = "isil,isl69260";
+				reg = <0x76>;
+			};
+		};
+
+		U197_PCA9546_CH3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	i2c-switch@75 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		SMB_OCP_SFF_3V3AUX_SCL: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		SMB_OCP_LFF_3V3AUX_SCL: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c14 {
+	status = "okay";
+
+	/* SCM FRU (U19) @ 0xA2 */
+	scm_fru: scm_fru@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	scm_tmp75_u4@4a {
+		compatible = "ti,tmp75";
+		reg = <0x4a>;
+	};
+};
+
+&i2c15 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index f14dace34c5a..530491ae5eb2 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -54,8 +54,7 @@
 		ranges;
 
 		fmc: spi@1e620000 {
-			reg = < 0x1e620000 0x94
-				0x20000000 0x10000000 >;
+			reg = <0x1e620000 0x94>, <0x20000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "aspeed,ast2400-fmc";
@@ -65,34 +64,42 @@
 			flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
 				spi-max-frequency = <50000000>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
+				spi-max-frequency = <50000000>;
 				status = "disabled";
 			};
 			flash@2 {
 				reg = < 2 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
+				spi-max-frequency = <50000000>;
 				status = "disabled";
 			};
 			flash@3 {
 				reg = < 3 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
+				spi-max-frequency = <50000000>;
 				status = "disabled";
 			};
 			flash@4 {
 				reg = < 4 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
+				spi-max-frequency = <50000000>;
 				status = "disabled";
 			};
 		};
 
 		spi: spi@1e630000 {
-			reg = < 0x1e630000 0x18
-				0x30000000 0x10000000 >;
+			reg = <0x1e630000 0x18>, <0x30000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "aspeed,ast2400-spi";
@@ -102,6 +109,7 @@
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
@@ -392,6 +400,17 @@
 				};
 			};
 
+			peci0: peci-controller@1e78b000 {
+				compatible = "aspeed,ast2400-peci";
+				reg = <0x1e78b000 0x60>;
+				interrupts = <15>;
+				clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
+				resets = <&syscon ASPEED_RESET_PECI>;
+				cmd-timeout-ms = <1000>;
+				clock-frequency = <1000000>;
+				status = "disabled";
+			};
+
 			uart2: serial@1e78d000 {
 				compatible = "ns16550a";
 				reg = <0x1e78d000 0x20>;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 7495f93c5069..04f98d1dbb97 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -55,8 +55,7 @@
 		ranges;
 
 		fmc: spi@1e620000 {
-			reg = < 0x1e620000 0xc4
-				0x20000000 0x10000000 >;
+			reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "aspeed,ast2500-fmc";
@@ -67,25 +66,27 @@
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@2 {
 				reg = < 2 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
 
 		spi1: spi@1e630000 {
-			reg = < 0x1e630000 0xc4
-				0x30000000 0x08000000 >;
+			reg = <0x1e630000 0xc4>, <0x30000000 0x08000000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "aspeed,ast2500-spi";
@@ -95,19 +96,20 @@
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
 
 		spi2: spi@1e631000 {
-			reg = < 0x1e631000 0xc4
-				0x38000000 0x08000000 >;
+			reg = <0x1e631000 0xc4>, <0x38000000 0x08000000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "aspeed,ast2500-spi";
@@ -117,12 +119,14 @@
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
@@ -258,6 +262,14 @@
 				quality = <100>;
 			};
 
+			hace: crypto@1e6e3000 {
+				compatible = "aspeed,ast2500-hace";
+				reg = <0x1e6e3000 0x100>;
+				interrupts = <4>;
+				clocks = <&syscon ASPEED_CLK_GATE_YCLK>;
+				resets = <&syscon ASPEED_RESET_HACE>;
+			};
+
 			gfx: display@1e6e6000 {
 				compatible = "aspeed,ast2500-gfx", "syscon";
 				reg = <0x1e6e6000 0x1000>;
@@ -516,6 +528,17 @@
 				};
 			};
 
+			peci0: peci-controller@1e78b000 {
+				compatible = "aspeed,ast2500-peci";
+				reg = <0x1e78b000 0x60>;
+				interrupts = <15>;
+				clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
+				resets = <&syscon ASPEED_RESET_PECI>;
+				cmd-timeout-ms = <1000>;
+				clock-frequency = <1000000>;
+				status = "disabled";
+			};
+
 			uart2: serial@1e78d000 {
 				compatible = "ns16550a";
 				reg = <0x1e78d000 0x20>;
diff --git a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
index 6dde51c2aed3..7cd4f075e325 100644
--- a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
@@ -117,9 +117,9 @@
 		groups = "FWSPID";
 	};
 
-	pinctrl_fwqspid_default: fwqspid_default {
-		function = "FWQSPID";
-		groups = "FWQSPID";
+	pinctrl_fwqspi_default: fwqspi_default {
+		function = "FWQSPI";
+		groups = "FWQSPI";
 	};
 
 	pinctrl_fwspiwp_default: fwspiwp_default {
@@ -653,12 +653,12 @@
 	};
 
 	pinctrl_qspi1_default: qspi1_default {
-		function = "QSPI1";
+		function = "SPI1";
 		groups = "QSPI1";
 	};
 
 	pinctrl_qspi2_default: qspi2_default {
-		function = "QSPI2";
+		function = "SPI2";
 		groups = "QSPI2";
 	};
 
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index c32e87fad4dc..ebbcfe445d9c 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -95,8 +95,7 @@
 			};
 
 		fmc: spi@1e620000 {
-			reg = < 0x1e620000 0xc4
-				0x20000000 0x10000000 >;
+			reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "aspeed,ast2600-fmc";
@@ -107,25 +106,27 @@
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@2 {
 				reg = < 2 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
 
 		spi1: spi@1e630000 {
-			reg = < 0x1e630000 0xc4
-				0x30000000 0x10000000 >;
+			reg = <0x1e630000 0xc4>, <0x30000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "aspeed,ast2600-spi";
@@ -135,19 +136,20 @@
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
 
 		spi2: spi@1e631000 {
-			reg = < 0x1e631000 0xc4
-				0x50000000 0x10000000 >;
+			reg = <0x1e631000 0xc4>, <0x50000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "aspeed,ast2600-spi";
@@ -157,18 +159,21 @@
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@2 {
 				reg = < 2 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
@@ -181,6 +186,7 @@
 			status = "disabled";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_mdio1_default>;
+			resets = <&syscon ASPEED_RESET_MII>;
 		};
 
 		mdio1: mdio@1e650008 {
@@ -191,6 +197,7 @@
 			status = "disabled";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_mdio2_default>;
+			resets = <&syscon ASPEED_RESET_MII>;
 		};
 
 		mdio2: mdio@1e650010 {
@@ -201,6 +208,7 @@
 			status = "disabled";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_mdio3_default>;
+			resets = <&syscon ASPEED_RESET_MII>;
 		};
 
 		mdio3: mdio@1e650018 {
@@ -211,6 +219,7 @@
 			status = "disabled";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_mdio4_default>;
+			resets = <&syscon ASPEED_RESET_MII>;
 		};
 
 		mac0: ftgmac@1e660000 {
@@ -298,12 +307,30 @@
 			status = "disabled";
 		};
 
+		udc: usb@1e6a2000 {
+			compatible = "aspeed,ast2600-udc";
+			reg = <0x1e6a2000 0x300>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2bd_default>;
+			status = "disabled";
+		};
+
 		apb {
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
 
+			hace: crypto@1e6d0000 {
+				compatible = "aspeed,ast2600-hace";
+				reg = <0x1e6d0000 0x200>;
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_YCLK>;
+				resets = <&syscon ASPEED_RESET_HACE>;
+			};
+
 			syscon: syscon@1e6e2000 {
 				compatible = "aspeed,ast2600-scu", "syscon", "simple-mfd";
 				reg = <0x1e6e2000 0x1000>;
@@ -351,6 +378,17 @@
 				quality = <100>;
 			};
 
+			gfx: display@1e6e6000 {
+				compatible = "aspeed,ast2600-gfx", "syscon";
+				reg = <0x1e6e6000 0x1000>;
+				reg-io-width = <4>;
+				clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
+				resets = <&syscon ASPEED_RESET_GRAPHICS>;
+				syscon = <&syscon>;
+				status = "disabled";
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
 			xdma: xdma@1e6e7000 {
 				compatible = "aspeed,ast2600-xdma";
 				reg = <0x1e6e7000 0x100>;
@@ -389,6 +427,16 @@
 				reg = <0x1e6f2000 0x1000>;
 			};
 
+			video: video@1e700000 {
+				compatible = "aspeed,ast2600-video-engine";
+				reg = <0x1e700000 0x1000>;
+				clocks = <&syscon ASPEED_CLK_GATE_VCLK>,
+					 <&syscon ASPEED_CLK_GATE_ECLK>;
+				clock-names = "vclk", "eclk";
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
 			gpio0: gpio@1e780000 {
 				#gpio-cells = <2>;
 				gpio-controller;
@@ -512,6 +560,17 @@
 				status = "disabled";
 			};
 
+			peci0: peci-controller@1e78b000 {
+				compatible = "aspeed,ast2600-peci";
+				reg = <0x1e78b000 0x100>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_REF0CLK>;
+				resets = <&syscon ASPEED_RESET_PECI>;
+				cmd-timeout-ms = <1000>;
+				clock-frequency = <1000000>;
+				status = "disabled";
+			};
+
 			lpc: lpc@1e789000 {
 				compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon";
 				reg = <0x1e789000 0x1000>;
@@ -705,6 +764,62 @@
 				status = "disabled";
 			};
 
+			uart6: serial@1e790000 {
+				compatible = "ns16550a";
+				reg = <0x1e790000 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART6CLK>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart6_default>;
+
+				status = "disabled";
+			};
+
+			uart7: serial@1e790100 {
+				compatible = "ns16550a";
+				reg = <0x1e790100 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART7CLK>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart7_default>;
+
+				status = "disabled";
+			};
+
+			uart8: serial@1e790200 {
+				compatible = "ns16550a";
+				reg = <0x1e790200 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART8CLK>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart8_default>;
+
+				status = "disabled";
+			};
+
+			uart9: serial@1e790300 {
+				compatible = "ns16550a";
+				reg = <0x1e790300 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART9CLK>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart9_default>;
+
+				status = "disabled";
+			};
+
 			i2c: bus@1e78a000 {
 				compatible = "simple-bus";
 				#address-cells = <1>;
diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
index c1c8650dafce..3542ad8a243e 100644
--- a/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
+++ b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
@@ -44,7 +44,7 @@
 	status = "okay";
 
 	/* spi0.0: 4M Flash Macronix MX25R4035FM1IL0 */
-	spi-flash@0 {
+	flash@0 {
 		compatible = "mxicy,mx25u4035", "jedec,spi-nor";
 		spi-max-frequency = <33000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/at91-foxg20.dts b/arch/arm/boot/dts/at91-foxg20.dts
index 7edf057047f8..9dfd5de808d1 100644
--- a/arch/arm/boot/dts/at91-foxg20.dts
+++ b/arch/arm/boot/dts/at91-foxg20.dts
@@ -155,10 +155,10 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		btn {
+		button {
 			label = "Button";
 			gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
 			linux,code = <0x103>;
diff --git a/arch/arm/boot/dts/at91-gatwick.dts b/arch/arm/boot/dts/at91-gatwick.dts
index 5a81cab5fc3a..2c718cf84d7b 100644
--- a/arch/arm/boot/dts/at91-gatwick.dts
+++ b/arch/arm/boot/dts/at91-gatwick.dts
@@ -13,7 +13,7 @@
 	model = "Laird Workgroup Bridge 50N - Project Gatwick";
 	compatible = "laird,gatwick", "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 		autorepeat;
 
diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
index 3b8812fcd854..307663b4eec2 100644
--- a/arch/arm/boot/dts/at91-kizbox.dts
+++ b/arch/arm/boot/dts/at91-kizbox.dts
@@ -28,19 +28,17 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		reset {
+		button-reset {
 			label = "PB_RST";
 			gpios = <&pioB 30 GPIO_ACTIVE_HIGH>;
 			linux,code = <0x100>;
 			wakeup-source;
 		};
 
-		user {
+		button-user {
 			label = "PB_USER";
 			gpios = <&pioB 31 GPIO_ACTIVE_HIGH>;
 			linux,code = <0x101>;
diff --git a/arch/arm/boot/dts/at91-kizbox2-common.dtsi b/arch/arm/boot/dts/at91-kizbox2-common.dtsi
index c08834ddf07b..e5e21dff882f 100644
--- a/arch/arm/boot/dts/at91-kizbox2-common.dtsi
+++ b/arch/arm/boot/dts/at91-kizbox2-common.dtsi
@@ -31,26 +31,24 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		prog {
+		button-prog {
 			label = "PB_PROG";
 			gpios = <&pioE 27 GPIO_ACTIVE_LOW>;
 			linux,code = <0x102>;
 			wakeup-source;
 		};
 
-		reset {
+		button-reset {
 			label = "PB_RST";
 			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
 			linux,code = <0x100>;
 			wakeup-source;
 		};
 
-		user {
+		button-user {
 			label = "PB_USER";
 			gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
 			linux,code = <0x101>;
diff --git a/arch/arm/boot/dts/at91-kizbox3-hs.dts b/arch/arm/boot/dts/at91-kizbox3-hs.dts
index 2799b2a1f4d2..7075df6549e9 100644
--- a/arch/arm/boot/dts/at91-kizbox3-hs.dts
+++ b/arch/arm/boot/dts/at91-kizbox3-hs.dts
@@ -55,7 +55,7 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default" , "default", "default",
 				"default", "default" ;
@@ -68,35 +68,35 @@
 			     &pinctrl_pio_zbe_rst>;
 		pinctrl-4 = <&pinctrl_pio_input>;
 
-		SW1 {
+		switch-1 {
 			label = "SW1";
 			gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
 			linux,code = <0x101>;
 			wakeup-source;
 		};
 
-		SW2 {
+		switch-2 {
 			label = "SW2";
 			gpios = <&pioA PIN_PA18 GPIO_ACTIVE_LOW>;
 			linux,code = <0x102>;
 			wakeup-source;
 		};
 
-		SW3 {
+		switch-3 {
 			label = "SW3";
 			gpios = <&pioA PIN_PA22 GPIO_ACTIVE_LOW>;
 			linux,code = <0x103>;
 			wakeup-source;
 		};
 
-		SW7 {
+		switch-7 {
 			label = "SW7";
 			gpios = <&pioA PIN_PA26 GPIO_ACTIVE_LOW>;
 			linux,code = <0x107>;
 			wakeup-source;
 		};
 
-		SW8 {
+		switch-8 {
 			label = "SW8";
 			gpios = <&pioA PIN_PA24 GPIO_ACTIVE_LOW>;
 			linux,code = <0x108>;
@@ -186,7 +186,7 @@
 
 &pioA {
 	pinctrl_key_gpio_default: key_gpio_default {
-		pinmux=  <PIN_PA22__GPIO>,
+		pinmux = <PIN_PA22__GPIO>,
 		<PIN_PA24__GPIO>,
 		<PIN_PA26__GPIO>,
 		<PIN_PA29__GPIO>,
diff --git a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
index 9c622892c692..42640fe6b6d0 100644
--- a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
+++ b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
@@ -36,17 +36,15 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		prog {
+		key-prog {
 			label = "PB_PROG";
 			gpios = <&pioC 17 GPIO_ACTIVE_LOW>;
 			linux,code = <0x102>;
 			wakeup-source;
 		};
 
-		reset {
+		key-reset {
 			label = "PB_RST";
 			gpios = <&pioC 16 GPIO_ACTIVE_LOW>;
 			linux,code = <0x100>;
diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
index 4f123477e631..f71377c9b757 100644
--- a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
+++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
@@ -18,7 +18,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wakeup {
+		key-wakeup {
 			label = "Wakeup";
 			linux,code = <10>;
 			wakeup-source;
diff --git a/arch/arm/boot/dts/at91-q5xr5.dts b/arch/arm/boot/dts/at91-q5xr5.dts
index 47a00062f01f..9cf60b6f695c 100644
--- a/arch/arm/boot/dts/at91-q5xr5.dts
+++ b/arch/arm/boot/dts/at91-q5xr5.dts
@@ -125,7 +125,7 @@
 	cs-gpios = <&pioA 3 GPIO_ACTIVE_HIGH>, <&pioC 11 GPIO_ACTIVE_LOW>, <0>, <0>;
 	status = "okay";
 
-	m25p80@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/at91-qil_a9260.dts
index 969d990767fc..9d26f9996348 100644
--- a/arch/arm/boot/dts/at91-qil_a9260.dts
+++ b/arch/arm/boot/dts/at91-qil_a9260.dts
@@ -198,10 +198,8 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		user_pb {
+		button-user {
 			label = "user_pb";
 			gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
 			linux,code = <28>;
diff --git a/arch/arm/boot/dts/at91-sam9_l9260.dts b/arch/arm/boot/dts/at91-sam9_l9260.dts
index 1e2a28c2f365..2fb51b9aca2a 100644
--- a/arch/arm/boot/dts/at91-sam9_l9260.dts
+++ b/arch/arm/boot/dts/at91-sam9_l9260.dts
@@ -101,7 +101,7 @@
 		nand0: nand@40000000 {
 			nand-bus-width = <8>;
 			nand-ecc-mode = "soft";
-			nand-on-flash-bbt = <1>;
+			nand-on-flash-bbt;
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
index b1068cca4228..4ba52ba11dc6 100644
--- a/arch/arm/boot/dts/at91-sam9x60ek.dts
+++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
@@ -34,58 +34,15 @@
 		};
 	};
 
-	regulators: regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd_1v8: fixed-regulator-vdd_1v8@0 {
-			compatible = "regulator-fixed";
-			regulator-name = "VDD_1V8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-			status = "okay";
-		};
-
-		vdd_1v5: fixed-regulator-vdd_1v5@1 {
-			compatible = "regulator-fixed";
-			regulator-name = "VDD_1V5";
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
-			regulator-always-on;
-			status = "okay";
-		};
-
-		vdd1_3v3: fixed-regulator-vdd1_3v3@2 {
-			compatible = "regulator-fixed";
-			regulator-name = "VDD1_3V3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			status = "okay";
-		};
-
-		vdd2_3v3: regulator-fixed-vdd2_3v3@3 {
-			compatible = "regulator-fixed";
-			regulator-name = "VDD2_3V3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			status = "okay";
-		};
-	};
-
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_key_gpio_default>;
-		status = "okay";
 
-		sw1 {
+		button-1 {
 			label = "SW1";
 			gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
-			linux,code=<KEY_PROG1>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
@@ -112,6 +69,42 @@
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	vdd_1v8: fixed-regulator-vdd_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		status = "okay";
+	};
+
+	vdd_1v15: fixed-regulator-vdd_1v15 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-always-on;
+		status = "okay";
+	};
+
+	vdd1_3v3: fixed-regulator-vdd1_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD1_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		status = "okay";
+	};
+
+	vdd2_3v3: regulator-fixed-vdd2_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD2_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		status = "okay";
+	};
 };
 
 &adc {
@@ -233,10 +226,9 @@
 		status = "okay";
 
 		eeprom@53 {
-			compatible = "atmel,24c32";
+			compatible = "atmel,24c02";
 			reg = <0x53>;
 			pagesize = <16>;
-			size = <128>;
 			status = "okay";
 		};
 	};
@@ -266,8 +258,9 @@
 	status = "okay";
 
 	uart1: serial@200 {
-		compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+		compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 		reg = <0x200 0x200>;
+		atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 		interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
 		dmas = <&dma0
 			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
index a4623cc67cc1..8aa9e8dea337 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
@@ -15,7 +15,7 @@
 	compatible = "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
 
 	aliases {
-		i2c0	= &i2c0;
+		i2c0 = &i2c0;
 	};
 
 	clocks {
@@ -83,6 +83,8 @@
 			macb0: ethernet@f8008000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb0_default>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				phy-mode = "rmii";
 
 				ethernet-phy@7 {
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index 08f0d4b995ff..0dc6ca377b0c 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -21,8 +21,8 @@
 		serial0 = &uart1;	/* DBGU */
 		serial1 = &uart4;	/* mikro BUS 1 */
 		serial2 = &uart2;	/* mikro BUS 2 */
-		i2c1	= &i2c1;
-		i2c2	= &i2c3;
+		i2c1 = &i2c1;
+		i2c2 = &i2c3;
 	};
 
 	chosen {
@@ -478,13 +478,13 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_key_gpio_default>;
 
-		pb4 {
+		button {
 			label = "USER";
 			gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_PROG1>;
diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
index 21c86171e462..83bcf9fe0152 100644
--- a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
@@ -76,8 +76,8 @@
 		regulators {
 			vdd_3v3: VDD_IO {
 				regulator-name = "VDD_IO";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3700000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
 				regulator-initial-mode = <2>;
 				regulator-allowed-modes = <2>, <4>;
 				regulator-always-on;
@@ -95,8 +95,8 @@
 
 			vddio_ddr: VDD_DDR {
 				regulator-name = "VDD_DDR";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1850000>;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
 				regulator-initial-mode = <2>;
 				regulator-allowed-modes = <2>, <4>;
 				regulator-always-on;
@@ -118,8 +118,8 @@
 
 			vdd_core: VDD_CORE {
 				regulator-name = "VDD_CORE";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1850000>;
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1250000>;
 				regulator-initial-mode = <2>;
 				regulator-allowed-modes = <2>, <4>;
 				regulator-always-on;
@@ -160,8 +160,8 @@
 
 			LDO1 {
 				regulator-name = "LDO1";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3700000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
 
 				regulator-state-standby {
@@ -175,9 +175,8 @@
 
 			LDO2 {
 				regulator-name = "LDO2";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3700000>;
-				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
 
 				regulator-state-standby {
 					regulator-on-in-suspend;
@@ -194,6 +193,8 @@
 &macb0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_macb0_default>;
+	#address-cells = <1>;
+	#size-cells = <0>;
 	phy-mode = "rmii";
 
 	ethernet-phy@0 {
@@ -214,7 +215,7 @@
 	pinctrl-0 = <&pinctrl_qspi1_default>;
 	status = "disabled";
 
-	qspi1_flash: spi_flash@0 {
+	qspi1_flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
index c145c4e5ef58..b665ddc6b0de 100644
--- a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
@@ -19,21 +19,20 @@
 		serial1 = &uart6;	/* BT */
 		serial2 = &uart5;	/* mikro BUS 2 */
 		serial3 = &uart3;	/* mikro BUS 1 */
-		i2c1	= &i2c1;
+		i2c1 = &i2c1;
 	};
 
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_key_gpio_default>;
-		status = "okay";
 
-		sw4 {
+		button-1 {
 			label = "USER BUTTON";
 			gpios = <&pioA PIN_PB2 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_PROG1>;
@@ -191,7 +190,7 @@
 &qspi1 {
 	status = "okay";
 
-	qspi1_flash: spi_flash@0 {
+	qspi1_flash: flash@0 {
 		status = "okay";
 	};
 };
diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts
index 806eb1d911d7..dd1dec9d4e07 100644
--- a/arch/arm/boot/dts/at91-sama5d2_icp.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts
@@ -24,8 +24,8 @@
 		serial1 = &uart1;	/* mikro BUS 3 */
 		serial3 = &uart3;	/* mikro BUS 2 */
 		serial5 = &uart7;	/* flx2 */
-		i2c0	= &i2c0;
-		i2c1	= &i2c1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
 	};
 
 	chosen {
@@ -42,14 +42,13 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_key_gpio_default>;
-		status = "okay";
 
-		sw4 {
+		button-1 {
 			label = "USER_PB1";
 			gpios = <&pioA PIN_PD0 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_PROG1>;
@@ -197,8 +196,8 @@
 			regulators {
 				vdd_io_reg: VDD_IO {
 					regulator-name = "VDD_IO";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <3700000>;
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-always-on;
@@ -216,8 +215,8 @@
 
 				VDD_DDR {
 					regulator-name = "VDD_DDR";
-					regulator-min-microvolt = <600000>;
-					regulator-max-microvolt = <1850000>;
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-always-on;
@@ -235,8 +234,8 @@
 
 				VDD_CORE {
 					regulator-name = "VDD_CORE";
-					regulator-min-microvolt = <600000>;
-					regulator-max-microvolt = <1850000>;
+					regulator-min-microvolt = <1250000>;
+					regulator-max-microvolt = <1250000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-always-on;
@@ -258,7 +257,6 @@
 					regulator-max-microvolt = <1850000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
-					regulator-always-on;
 
 					regulator-state-standby {
 						regulator-on-in-suspend;
@@ -273,8 +271,8 @@
 
 				LDO1 {
 					regulator-name = "LDO1";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <3700000>;
+					regulator-min-microvolt = <2500000>;
+					regulator-max-microvolt = <2500000>;
 					regulator-always-on;
 
 					regulator-state-standby {
@@ -288,8 +286,8 @@
 
 				LDO2 {
 					regulator-name = "LDO2";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <3700000>;
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
 					regulator-always-on;
 
 					regulator-state-standby {
@@ -329,21 +327,21 @@
 	status = "okay";
 
 	eeprom@50 {
-		compatible = "atmel,24c32";
+		compatible = "atmel,24c02";
 		reg = <0x50>;
 		pagesize = <16>;
 		status = "okay";
 	};
 
 	eeprom@52 {
-		compatible = "atmel,24c32";
+		compatible = "atmel,24c02";
 		reg = <0x52>;
 		pagesize = <16>;
 		status = "disabled";
 	};
 
 	eeprom@53 {
-		compatible = "atmel,24c32";
+		compatible = "atmel,24c02";
 		reg = <0x53>;
 		pagesize = <16>;
 		status = "disabled";
diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
index 8ed58af01391..76a711b167b0 100644
--- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
@@ -20,9 +20,9 @@
 
 	aliases {
 		serial0 = &uart0;	/* DBGU */
-		i2c0	= &i2c0;	/* mikroBUS 1 */
-		i2c1	= &i2c1;	/* XPRO EXT1 */
-		i2c2	= &i2c2;
+		i2c0 = &i2c0;	/* mikroBUS 1 */
+		i2c1 = &i2c1;	/* XPRO EXT1 */
+		i2c2 = &i2c2;
 	};
 
 	chosen {
@@ -139,6 +139,8 @@
 			macb0: ethernet@f8008000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				phy-mode = "rmii";
 				status = "okay";
 
@@ -394,13 +396,13 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_key_gpio_default>;
 
-		bp1 {
+		button-1 {
 			label = "PB_USER";
 			gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_PROG1>;
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index 9bf2ec0ba3e2..85949c24b687 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -137,7 +137,7 @@
 				pinctrl-0 = <&pinctrl_spi0_default>;
 				status = "okay";
 
-				m25p80@0 {
+				flash@0 {
 					compatible = "atmel,at25df321a";
 					reg = <0>;
 					spi-max-frequency = <50000000>;
@@ -147,6 +147,8 @@
 			macb0: ethernet@f8008000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				phy-mode = "rmii";
 				status = "okay";
 
@@ -205,10 +207,10 @@
 
 							regulator-state-mem {
 								regulator-on-in-suspend;
-								regulator-suspend-min-microvolt=<1400000>;
-								regulator-suspend-max-microvolt=<1400000>;
+								regulator-suspend-min-microvolt = <1400000>;
+								regulator-suspend-max-microvolt = <1400000>;
 								regulator-changeable-in-suspend;
-								regulator-mode=<ACT8945A_REGULATOR_MODE_LOWPOWER>;
+								regulator-mode = <ACT8945A_REGULATOR_MODE_LOWPOWER>;
 							};
 						};
 
@@ -703,13 +705,13 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_key_gpio_default>;
 
-		bp1 {
+		button {
 			label = "PB_USER";
 			gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_PROG1>;
diff --git a/arch/arm/boot/dts/at91-sama5d3_eds.dts b/arch/arm/boot/dts/at91-sama5d3_eds.dts
new file mode 100644
index 000000000000..c287b03d768b
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d3_eds.dts
@@ -0,0 +1,307 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * at91-sama5d3_eds.dts - Device Tree file for the SAMA5D3 Ethernet
+ *    Development System board.
+ *
+ * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Jerry Ray <jerry.ray@microchip.com>
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+
+/ {
+	model = "SAMA5D3 Ethernet Development System";
+	compatible = "microchip,sama5d3-eds", "atmel,sama5d36",
+		     "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio>;
+
+		button-3 {
+			label = "PB_USER";
+			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
+			linux,code = <0x104>;
+			wakeup-source;
+		};
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x10000000>;
+	};
+
+	vcc_3v3_reg: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vcc_2v5_reg: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_2V5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+		vin-supply = <&vcc_3v3_reg>;
+	};
+
+	vcc_1v8_reg: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&vcc_3v3_reg>;
+	};
+
+	vcc_1v2_reg: regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+	};
+
+	vcc_mmc0_reg: regulator-5 {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc0-card-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_mmc0_reg_gpio>;
+		gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	nand_controller: nand-controller {
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x2>;
+			atmel,rb = <0>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <4>;
+			nand-ecc-step-size = <512>;
+			nand-on-flash-bbt;
+			label = "atmel_nand";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				at91bootstrap@0 {
+					label = "at91bootstrap";
+					reg = <0x0 0x40000>;
+				};
+
+				bootloader@40000 {
+					label = "bootloader";
+					reg = <0x40000 0xc0000>;
+				};
+
+				bootloaderenvred@100000 {
+					label = "bootloader env redundant";
+					reg = <0x100000 0x40000>;
+				};
+
+				bootloaderenv@140000 {
+					label = "bootloader env";
+					reg = <0x140000 0x40000>;
+				};
+
+				dtb@180000 {
+					label = "device tree";
+					reg = <0x180000 0x80000>;
+				};
+
+				kernel@200000 {
+					label = "kernel";
+					reg = <0x200000 0x600000>;
+				};
+
+				rootfs@800000 {
+					label = "rootfs";
+					reg = <0x800000 0x0f800000>;
+				};
+			};
+		};
+	};
+};
+
+&i2c0 {
+	pinctrl-0 = <&pinctrl_i2c0_pu>;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-0 = <&pinctrl_i2c2_pu>;
+	status = "okay";
+};
+
+&main_xtal {
+	clock-frequency = <12000000>;
+};
+
+&mmc0 {
+	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3
+		     &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>;
+	vmmc-supply = <&vcc_mmc0_reg>;
+	vqmmc-supply = <&vcc_3v3_reg>;
+	status = "okay";
+	slot@0 {
+		reg = <0>;
+		bus-width = <8>;
+		cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	board {
+		pinctrl_i2c0_pu: i2c0-pu {
+			atmel,pins =
+				<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+				<AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_i2c2_pu: i2c2-pu {
+			atmel,pins =
+				<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
+				<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_key_gpio: key-gpio-0 {
+			atmel,pins =
+				<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+		};
+
+		pinctrl_mmc0_cd: mmc0-cd {
+			atmel,pins =
+				<AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+		};
+
+		/* Reserved for reset signal to the RGMII connector. */
+		pinctrl_rgmii_rstn: rgmii-rstn {
+			atmel,pins =
+				<AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+		};
+
+		/* Reserved for an interrupt line from the RMII and RGMII connectors. */
+		pinctrl_spi_irqn: spi-irqn {
+			atmel,pins =
+				<AT91_PIOB 28 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_spi0_cs: spi0-cs-default {
+			atmel,pins =
+				<AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				 AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_spi1_cs: spi1-cs-default {
+			atmel,pins = <AT91_PIOC 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOC 28 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_usba_vbus: usba-vbus {
+			atmel,pins =
+				<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_usb_default: usb-default {
+			atmel,pins =
+				<AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				 AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		/* Reserved for VBUS fault interrupt. */
+		pinctrl_vbusfault_irqn: vbusfault-irqn {
+			atmel,pins =
+				<AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_vcc_mmc0_reg_gpio: vcc-mmc0-reg-gpio-default {
+			atmel,pins = <AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+	};
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&spi0 {
+	pinctrl-names = "default", "cs";
+	pinctrl-1 = <&pinctrl_spi0_cs>;
+	cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default", "cs";
+	pinctrl-1 = <&pinctrl_spi1_cs>;
+	cs-gpios = <&pioC 25 0>, <0>, <0>, <&pioC 28 0>;
+	status = "okay";
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&usb0 {	/* USB Device port with VBUS detection. */
+	atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	status = "okay";
+};
+
+&usb1 {	/* 3-port Host. First port is unused. */
+	atmel,vbus-gpio = <0
+			   &pioE 3 GPIO_ACTIVE_HIGH
+			   &pioE 4 GPIO_ACTIVE_HIGH
+			  >;
+	num-ports = <3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_default>;
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-sama5d3_ksz9477_evb.dts b/arch/arm/boot/dts/at91-sama5d3_ksz9477_evb.dts
index 443e8b022897..14af1fd6d247 100644
--- a/arch/arm/boot/dts/at91-sama5d3_ksz9477_evb.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_ksz9477_evb.dts
@@ -120,26 +120,31 @@
 			port@0 {
 				reg = <0>;
 				label = "lan1";
+				phy-mode = "internal";
 			};
 
 			port@1 {
 				reg = <1>;
 				label = "lan2";
+				phy-mode = "internal";
 			};
 
 			port@2 {
 				reg = <2>;
 				label = "lan3";
+				phy-mode = "internal";
 			};
 
 			port@3 {
 				reg = <3>;
 				label = "lan4";
+				phy-mode = "internal";
 			};
 
 			port@4 {
 				reg = <4>;
 				label = "lan5";
+				phy-mode = "internal";
 			};
 
 			port@5 {
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index d72c042f2850..1f42a6a981bf 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -57,8 +57,8 @@
 			};
 
 			spi0: spi@f0004000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi0_cs>;
+				pinctrl-names = "default", "cs";
+				pinctrl-1 = <&pinctrl_spi0_cs>;
 				cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
 				status = "okay";
 			};
@@ -171,8 +171,8 @@
 			};
 
 			spi1: spi@f8008000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi1_cs>;
+				pinctrl-names = "default", "cs";
+				pinctrl-1 = <&pinctrl_spi1_cs>;
 				cs-gpios = <&pioC 25 0>;
 				status = "okay";
 			};
@@ -372,13 +372,13 @@
 		regulator-always-on;
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_key_gpio>;
 
-		bp3 {
+		button {
 			label = "PB_USER";
 			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_PROG1>;
diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
index 710cb72bda5a..fd1086f52b40 100644
--- a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
@@ -49,7 +49,7 @@
 				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
 				status = "okay";
 
-				m25p80@0 {
+				flash@0 {
 					compatible = "atmel,at25df321a";
 					spi-max-frequency = <50000000>;
 					reg = <0>;
diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
index d241c24f0d83..f122f302f8e0 100644
--- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
@@ -81,8 +81,8 @@
 			};
 
 			spi1: spi@fc018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi0_cs>;
+				pinctrl-names = "default", "cs";
+				pinctrl-1 = <&pinctrl_spi1_cs>;
 				cs-gpios = <&pioB 21 0>;
 				status = "okay";
 			};
@@ -140,7 +140,7 @@
 						atmel,pins =
 							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
 					};
-					pinctrl_spi0_cs: spi0_cs_default {
+					pinctrl_spi1_cs: spi1_cs_default {
 						atmel,pins =
 							<AT91_PIOB 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
 					};
@@ -242,13 +242,13 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_key_gpio>;
 
-		pb_user1 {
+		button {
 			label = "pb_user1";
 			gpios = <&pioE 8 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_PROG1>;
diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts
index fe432b6b7e95..fce4e93c6bee 100644
--- a/arch/arm/boot/dts/at91-sama5d4ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d4ek.dts
@@ -65,7 +65,7 @@
 			spi0: spi@f8010000 {
 				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
 				status = "okay";
-				m25p80@0 {
+				flash@0 {
 					compatible = "atmel,at25df321a";
 					spi-max-frequency = <50000000>;
 					reg = <0>;
@@ -269,13 +269,13 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_key_gpio>;
 
-		pb_user1 {
+		button {
 			label = "pb_user1";
 			gpios = <&pioE 13 GPIO_ACTIVE_HIGH>;
 			linux,code = <0x100>;
diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts
index ccf9e224da78..3b25c67795dd 100644
--- a/arch/arm/boot/dts/at91-sama7g5ek.dts
+++ b/arch/arm/boot/dts/at91-sama7g5ek.dts
@@ -14,6 +14,7 @@
 #include <dt-bindings/mfd/atmel-flexcom.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/sound/microchip,pdmc.h>
 
 / {
 	model = "Microchip SAMA7G5-EK";
@@ -44,13 +45,13 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_key_gpio_default>;
 
-		bp1 {
+		button {
 			label = "PB_USER";
 			gpios = <&pioA PIN_PA12 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_PROG1>;
@@ -131,6 +132,18 @@
 	status = "okay";
 };
 
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_default>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_default>;
+	status = "okay";
+};
+
 &cpu0 {
 	cpu-supply = <&vddcpu>;
 };
@@ -231,14 +244,15 @@
 			regulators {
 				vdd_3v3: VDD_IO {
 					regulator-name = "VDD_IO";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <3700000>;
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-always-on;
 
 					regulator-state-standby {
 						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <3300000>;
 						regulator-mode = <4>;
 					};
 
@@ -250,8 +264,8 @@
 
 				vddioddr: VDD_DDR {
 					regulator-name = "VDD_DDR";
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1450000>;
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-always-on;
@@ -271,14 +285,15 @@
 
 				vddcore: VDD_CORE {
 					regulator-name = "VDD_CORE";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1850000>;
+					regulator-min-microvolt = <1150000>;
+					regulator-max-microvolt = <1150000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-always-on;
 
 					regulator-state-standby {
 						regulator-on-in-suspend;
+						regulator-suspend-voltage = <1150000>;
 						regulator-mode = <4>;
 					};
 
@@ -290,8 +305,8 @@
 
 				vddcpu: VDD_OTHER {
 					regulator-name = "VDD_OTHER";
-					regulator-min-microvolt = <1125000>;
-					regulator-max-microvolt = <1850000>;
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1250000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-ramp-delay = <3125>;
@@ -299,6 +314,7 @@
 
 					regulator-state-standby {
 						regulator-on-in-suspend;
+						regulator-suspend-voltage = <1050000>;
 						regulator-mode = <4>;
 					};
 
@@ -310,11 +326,12 @@
 
 				vldo1: LDO1 {
 					regulator-name = "LDO1";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <3700000>;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
 					regulator-always-on;
 
 					regulator-state-standby {
+						regulator-suspend-voltage = <1800000>;
 						regulator-on-in-suspend;
 					};
 
@@ -329,6 +346,7 @@
 					regulator-max-microvolt = <3700000>;
 
 					regulator-state-standby {
+						regulator-suspend-voltage = <1800000>;
 						regulator-on-in-suspend;
 					};
 
@@ -439,7 +457,7 @@
 		     &pinctrl_gmac1_mdio_default
 		     &pinctrl_gmac1_phy_irq>;
 	phy-mode = "rmii";
-	status = "okay";
+	status = "okay"; /* Conflict with pdmc0. */
 
 	ethernet-phy@0 {
 		reg = <0x0>;
@@ -453,7 +471,31 @@
 	pinctrl-0 = <&pinctrl_i2s0_default>;
 };
 
+&pdmc0 {
+	#sound-dai-cells = <0>;
+	microchip,mic-pos = <MCHP_PDMC_DS0 MCHP_PDMC_CLK_NEGATIVE>, /* MIC 1 */
+			    <MCHP_PDMC_DS1 MCHP_PDMC_CLK_NEGATIVE>, /* MIC 2 */
+			    <MCHP_PDMC_DS0 MCHP_PDMC_CLK_POSITIVE>, /* MIC 3 */
+			    <MCHP_PDMC_DS1 MCHP_PDMC_CLK_POSITIVE>; /* MIC 4 */
+	status = "disabled"; /* Conflict with gmac1. */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pdmc0_default>;
+};
+
 &pioA {
+
+	pinctrl_can0_default: can0_default {
+		pinmux = <PIN_PD12__CANTX0>,
+			 <PIN_PD13__CANRX0 >;
+		bias-disable;
+	};
+
+	pinctrl_can1_default: can1_default {
+		pinmux = <PIN_PD14__CANTX1>,
+			 <PIN_PD15__CANRX1 >;
+		bias-disable;
+	};
+
 	pinctrl_flx0_default: flx0_default {
 		pinmux = <PIN_PE3__FLEXCOM0_IO0>,
 			 <PIN_PE4__FLEXCOM0_IO1>,
@@ -465,7 +507,7 @@
 	pinctrl_flx3_default: flx3_default {
 		pinmux = <PIN_PD16__FLEXCOM3_IO0>,
 			 <PIN_PD17__FLEXCOM3_IO1>;
-		bias-disable;
+		bias-pull-up;
 	};
 
 	pinctrl_flx4_default: flx4_default {
@@ -609,6 +651,13 @@
 		bias-disable;
 	};
 
+	pinctrl_pdmc0_default: pdmc0_default {
+		pinmux = <PIN_PD23__PDMC0_DS0>,
+			 <PIN_PD24__PDMC0_DS1>,
+			 <PIN_PD22__PDMC0_CLK>;
+		bias_disable;
+	};
+
 	pinctrl_qspi: qspi {
 		pinmux = <PIN_PB12__QSPI0_IO0>,
 			 <PIN_PB11__QSPI0_IO1>,
@@ -625,7 +674,7 @@
 			 <PIN_PB21__QSPI0_INT>;
 		bias-disable;
 		slew-rate = <0>;
-		atmel,drive-strength = <ATMEL_PIO_DRVSTR_HI>;
+		atmel,drive-strength = <ATMEL_PIO_DRVSTR_ME>;
 	};
 
 	pinctrl_sdmmc0_default: sdmmc0_default {
diff --git a/arch/arm/boot/dts/at91-vinco.dts b/arch/arm/boot/dts/at91-vinco.dts
index a51a3372afa1..ebeaa6ab500e 100644
--- a/arch/arm/boot/dts/at91-vinco.dts
+++ b/arch/arm/boot/dts/at91-vinco.dts
@@ -59,7 +59,7 @@
 			spi0: spi@f8010000 {
 				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
 				status = "okay";
-				m25p80@0 {
+				flash@0 {
 					compatible = "n25q32b", "jedec,spi-nor";
 					spi-max-frequency = <50000000>;
 					reg = <0>;
diff --git a/arch/arm/boot/dts/at91-wb45n.dts b/arch/arm/boot/dts/at91-wb45n.dts
index 54d130c92185..ef73f727f7bd 100644
--- a/arch/arm/boot/dts/at91-wb45n.dts
+++ b/arch/arm/boot/dts/at91-wb45n.dts
@@ -12,13 +12,10 @@
 	model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)";
 	compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9";
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		irqbtn@18 {
-			reg = <18>;
+		button {
 			label = "IRQBTN";
 			linux,code = <99>;
 			gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/at91-wb50n.dts b/arch/arm/boot/dts/at91-wb50n.dts
index 89f0f717f7ed..ec2becf6133b 100644
--- a/arch/arm/boot/dts/at91-wb50n.dts
+++ b/arch/arm/boot/dts/at91-wb50n.dts
@@ -13,21 +13,17 @@
 	model = "Laird Workgroup Bridge 50N - Atmel SAMA5D";
 	compatible = "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		btn0@10 {
-			reg = <10>;
+		button-0 {
 			label = "BTNESC";
 			linux,code = <1>; /* ESC button */
 			gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
 			wakeup-source;
 		};
 
-		irqbtn@31 {
-			reg = <31>;
+		button-1 {
 			label = "IRQBTN";
 			linux,code = <99>; /* SysReq button */
 			gpios = <&pioE 31 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
index d1181ead18e5..6f9004ebf424 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -13,6 +13,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	#address-cells = <1>;
@@ -596,6 +597,7 @@
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart";
 				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
@@ -607,6 +609,7 @@
 			usart0: serial@fffc0000 {
 				compatible = "atmel,at91rm9200-usart";
 				reg = <0xfffc0000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -620,6 +623,7 @@
 			usart1: serial@fffc4000 {
 				compatible = "atmel,at91rm9200-usart";
 				reg = <0xfffc4000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -633,6 +637,7 @@
 			usart2: serial@fffc8000 {
 				compatible = "atmel,at91rm9200-usart";
 				reg = <0xfffc8000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -646,6 +651,7 @@
 			usart3: serial@fffcc000 {
 				compatible = "atmel,at91rm9200-usart";
 				reg = <0xfffcc000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -660,7 +666,7 @@
 				compatible = "atmel,at91rm9200-udc";
 				reg = <0xfffb0000 0x4000>;
 				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 2>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>, <&pmc PMC_TYPE_SYSTEM 2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>, <&pmc PMC_TYPE_SYSTEM 1>;
 				clock-names = "pclk", "hclk";
 				status = "disabled";
 			};
diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts
index e1ef4e44e663..4624a6f076f8 100644
--- a/arch/arm/boot/dts/at91rm9200ek.dts
+++ b/arch/arm/boot/dts/at91rm9200ek.dts
@@ -73,7 +73,7 @@
 			spi0: spi@fffe0000 {
 				status = "okay";
 				cs-gpios = <&pioA 3 0>, <0>, <0>, <0>;
-				mtd_dataflash@0 {
+				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <15000000>;
 					reg = <0>;
@@ -94,7 +94,7 @@
 			status = "okay";
 		};
 
-		nor_flash@10000000 {
+		flash@10000000 {
 			compatible = "cfi-flash";
 			reg = <0x10000000 0x800000>;
 			linux,mtd-name = "physmap-flash.0";
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index 7368347c9357..789fe356dbf6 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	#address-cells = <1>;
@@ -123,7 +124,7 @@
 				clock-names = "slow_xtal", "main_xtal";
 			};
 
-			rstc@fffffd00 {
+			reset-controller@fffffd00 {
 				compatible = "atmel,at91sam9260-rstc";
 				reg = <0xfffffd00 0x10>;
 				clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
@@ -532,6 +533,7 @@
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
@@ -543,6 +545,7 @@
 			usart0: serial@fffb0000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb0000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -556,6 +559,7 @@
 			usart1: serial@fffb4000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb4000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -569,6 +573,7 @@
 			usart2: serial@fffb8000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb8000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -582,6 +587,7 @@
 			usart3: serial@fffd0000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffd0000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -595,6 +601,7 @@
 			uart0: serial@fffd4000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffd4000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -608,6 +615,7 @@
 			uart1: serial@fffd8000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffd8000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts
index ce96345d28a3..bb72f050a4fe 100644
--- a/arch/arm/boot/dts/at91sam9260ek.dts
+++ b/arch/arm/boot/dts/at91sam9260ek.dts
@@ -92,7 +92,7 @@
 
 			spi0: spi@fffc8000 {
 				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
-				mtd_dataflash@1 {
+				flash@1 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <50000000>;
 					reg = <1>;
@@ -144,17 +144,17 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		btn3 {
+		button-3 {
 			label = "Button 3";
 			gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
 			linux,code = <0x103>;
 			wakeup-source;
 		};
 
-		btn4 {
+		button-4 {
 			label = "Button 4";
 			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_PROG1>;
diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
index 7adc36ca8a46..ee0bd1aceb3f 100644
--- a/arch/arm/boot/dts/at91sam9261.dtsi
+++ b/arch/arm/boot/dts/at91sam9261.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	#address-cells = <1>;
@@ -179,6 +180,7 @@
 			usart0: serial@fffb0000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb0000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -192,6 +194,7 @@
 			usart1: serial@fffb4000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb4000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -205,6 +208,7 @@
 			usart2: serial@fffb8000{
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb8000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -301,6 +305,7 @@
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
@@ -603,7 +608,7 @@
 				clock-names = "slow_xtal", "main_xtal";
 			};
 
-			rstc@fffffd00 {
+			reset-controller@fffffd00 {
 				compatible = "atmel,at91sam9260-rstc";
 				reg = <0xfffffd00 0x10>;
 				clocks = <&slow_xtal>;
diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts
index beed819609e8..88869ca874d1 100644
--- a/arch/arm/boot/dts/at91sam9261ek.dts
+++ b/arch/arm/boot/dts/at91sam9261ek.dts
@@ -145,7 +145,7 @@
 				cs-gpios = <&pioA 3 0>, <0>, <&pioA 28 0>, <0>;
 				status = "okay";
 
-				mtd_dataflash@0 {
+				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					reg = <0>;
 					spi-max-frequency = <15000000>;
@@ -178,6 +178,10 @@
 				status = "okay";
 			};
 
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+			};
+
 			watchdog@fffffd40 {
 				status = "okay";
 			};
@@ -207,31 +211,31 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		button_0 {
+		button-0 {
 			label = "button_0";
 			gpios = <&pioA 27 GPIO_ACTIVE_LOW>;
 			linux,code = <256>;
 			wakeup-source;
 		};
 
-		button_1 {
+		button-1 {
 			label = "button_1";
 			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
 			linux,code = <257>;
 			wakeup-source;
 		};
 
-		button_2 {
+		button-2 {
 			label = "button_2";
 			gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
 			linux,code = <258>;
 			wakeup-source;
 		};
 
-		button_3 {
+		button-3 {
 			label = "button_3";
 			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
 			linux,code = <259>;
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index fe45d96239c9..3ce9ea987312 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	#address-cells = <1>;
@@ -151,7 +152,7 @@
 				clock-names = "t0_clk", "slow_clk";
 			};
 
-			rstc@fffffd00 {
+			reset-controller@fffffd00 {
 				compatible = "atmel,at91sam9260-rstc";
 				reg = <0xfffffd00 0x10>;
 				clocks = <&slow_xtal>;
@@ -540,6 +541,7 @@
 			dbgu: serial@ffffee00 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xffffee00 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
@@ -551,6 +553,7 @@
 			usart0: serial@fff8c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff8c000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -564,6 +567,7 @@
 			usart1: serial@fff90000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff90000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -577,6 +581,7 @@
 			usart2: serial@fff94000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff94000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts
index 71f60576761a..ce8baff6a9f4 100644
--- a/arch/arm/boot/dts/at91sam9263ek.dts
+++ b/arch/arm/boot/dts/at91sam9263ek.dts
@@ -95,13 +95,17 @@
 			spi0: spi@fffa4000 {
 				status = "okay";
 				cs-gpios = <&pioA 5 0>, <0>, <0>, <0>;
-				mtd_dataflash@0 {
+				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <50000000>;
 					reg = <0>;
 				};
 			};
 
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+			};
+
 			watchdog@fffffd40 {
 				status = "okay";
 			};
@@ -228,17 +232,17 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		left_click {
+		button-left-click {
 			label = "left_click";
 			gpios = <&pioC 5 GPIO_ACTIVE_LOW>;
 			linux,code = <272>;
 			wakeup-source;
 		};
 
-		right_click {
+		button-right-click {
 			label = "right_click";
 			gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
 			linux,code = <273>;
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index 87bb39060e8b..024af2db638e 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -39,6 +39,13 @@
 
 				};
 
+				usb1 {
+					pinctrl_usb1_vbus_gpio: usb1_vbus_gpio {
+						atmel,pins =
+							<AT91_PIOC 5 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;	/* PC5 GPIO */
+					};
+				};
+
 				mmc0_slot1 {
 					pinctrl_board_mmc0_slot1: mmc0_slot1-board {
 						atmel,pins =
@@ -84,6 +91,8 @@
 			};
 
 			usb1: gadget@fffa4000 {
+				pinctrl-0 = <&pinctrl_usb1_vbus_gpio>;
+				pinctrl-names = "default";
 				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
 				status = "okay";
 			};
@@ -110,7 +119,7 @@
 
 			spi0: spi@fffc8000 {
 				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
-				mtd_dataflash@1 {
+				flash@1 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <50000000>;
 					reg = <1>;
@@ -214,25 +223,37 @@
 		24c512@50 {
 			compatible = "atmel,24c512";
 			reg = <0x50>;
+			vcc-supply = <&reg_3v3>;
 		};
 
 		wm8731: wm8731@1b {
 			compatible = "wm8731";
 			reg = <0x1b>;
+
+			/* PCK0 at 12MHz */
+			clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+			clock-names = "mclk";
+			assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+			assigned-clock-rates = <12000000>;
+
+			HPVDD-supply = <&vcc_dac>;
+			AVDD-supply = <&vcc_dac>;
+			DCVDD-supply = <&reg_3v3>;
+			DBVDD-supply = <&reg_3v3>;
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		btn3 {
+		button-3 {
 			label = "Button 3";
 			gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
 			linux,code = <0x103>;
 			wakeup-source;
 		};
 
-		btn4 {
+		button-4 {
 			label = "Button 4";
 			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_PROG1>;
@@ -254,4 +275,35 @@
 		atmel,ssc-controller = <&ssc0>;
 		atmel,audio-codec = <&wm8731>;
 	};
+
+	reg_5v: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_3v3: fixedregulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		vin-supply = <&reg_5v>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_1v: fixedregulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "1V";
+		vin-supply = <&reg_5v>;
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+	};
+
+	vcc_dac: fixedregulator3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_DAC";
+		vin-supply = <&reg_3v3>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 };
diff --git a/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts b/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts
index 7da70aeeb528..92f2c05c873f 100644
--- a/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts
+++ b/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts
@@ -23,7 +23,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user_btn1 {
+		button {
 			label = "USER_BTN1";
 			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_PROG1>;
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 2ab730fd6472..95f5d76234db 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -13,6 +13,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	#address-cells = <1>;
@@ -137,7 +138,7 @@
 				clock-names = "slow_clk", "main_xtal";
 			};
 
-			rstc@fffffd00 {
+			reset-controller@fffffd00 {
 				compatible = "atmel,at91sam9g45-rstc";
 				reg = <0xfffffd00 0x10>;
 				clocks = <&clk32k>;
@@ -675,6 +676,7 @@
 
 			dbgu: serial@ffffee00 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				reg = <0xffffee00 0x200>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
@@ -687,6 +689,7 @@
 			usart0: serial@fff8c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff8c000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -700,6 +703,7 @@
 			usart1: serial@fff90000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff90000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -713,6 +717,7 @@
 			usart2: serial@fff94000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff94000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -726,6 +731,7 @@
 			usart3: serial@fff98000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff98000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index b6256a20fbc7..7f45e81ca165 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -167,7 +167,7 @@
 			spi0: spi@fffa4000{
 				status = "okay";
 				cs-gpios = <&pioB 3 0>, <0>, <0>, <0>;
-				mtd_dataflash@0 {
+				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <13000000>;
 					reg = <0>;
@@ -343,48 +343,48 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		left_click {
+		button-left-click {
 			label = "left_click";
 			gpios = <&pioB 6 GPIO_ACTIVE_LOW>;
 			linux,code = <272>;
 			wakeup-source;
 		};
 
-		right_click {
+		button-right-click {
 			label = "right_click";
 			gpios = <&pioB 7 GPIO_ACTIVE_LOW>;
 			linux,code = <273>;
 			wakeup-source;
 		};
 
-		left {
+		button-left {
 			label = "Joystick Left";
 			gpios = <&pioB 14 GPIO_ACTIVE_LOW>;
 			linux,code = <105>;
 		};
 
-		right {
+		button-right {
 			label = "Joystick Right";
 			gpios = <&pioB 15 GPIO_ACTIVE_LOW>;
 			linux,code = <106>;
 		};
 
-		up {
+		button-up {
 			label = "Joystick Up";
 			gpios = <&pioB 16 GPIO_ACTIVE_LOW>;
 			linux,code = <103>;
 		};
 
-		down {
+		button-down {
 			label = "Joystick Down";
 			gpios = <&pioB 17 GPIO_ACTIVE_LOW>;
 			linux,code = <108>;
 		};
 
-		enter {
+		button-enter {
 			label = "Joystick Press";
 			gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
 			linux,code = <28>;
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 0785389f5507..83114d26f10d 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	#address-cells = <1>;
@@ -126,7 +127,7 @@
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 			};
 
-			rstc@fffffe00 {
+			reset-controller@fffffe00 {
 				compatible = "atmel,at91sam9g45-rstc";
 				reg = <0xfffffe00 0x10>;
 				clocks = <&clk32k>;
@@ -593,6 +594,7 @@
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
@@ -618,6 +620,7 @@
 			usart0: serial@f801c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf801c000 0x4000>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart0>;
@@ -629,6 +632,7 @@
 			usart1: serial@f8020000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8020000 0x4000>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart1>;
@@ -640,6 +644,7 @@
 			usart2: serial@f8024000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8024000 0x4000>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart2>;
@@ -651,6 +656,7 @@
 			usart3: serial@f8028000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8028000 0x4000>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart3>;
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index 2bc4e6e0a923..4c644d4c6be7 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -119,7 +119,7 @@
 			spi0: spi@f0000000 {
 				status = "okay";
 				cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
-				m25p80@0 {
+				flash@0 {
 					compatible = "atmel,at25df321a";
 					spi-max-frequency = <50000000>;
 					reg = <0>;
@@ -226,10 +226,10 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		enter {
+		button-enter {
 			label = "Enter";
 			gpios = <&pioB 3 GPIO_ACTIVE_LOW>;
 			linux,code = <28>;
diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi
index 730d1182c73e..364a2ff0a763 100644
--- a/arch/arm/boot/dts/at91sam9rl.dtsi
+++ b/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	#address-cells = <1>;
@@ -175,6 +176,7 @@
 			usart0: serial@fffb0000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb0000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -188,6 +190,7 @@
 			usart1: serial@fffb4000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb4000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -201,6 +204,7 @@
 			usart2: serial@fffb8000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb8000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -214,6 +218,7 @@
 			usart3: serial@fffbc000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffbc000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -322,6 +327,7 @@
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
@@ -766,7 +772,7 @@
 				clock-names = "slow_clk", "main_xtal";
 			};
 
-			rstc@fffffd00 {
+			reset-controller@fffffd00 {
 				compatible = "atmel,at91sam9260-rstc";
 				reg = <0xfffffd00 0x10>;
 				clocks = <&clk32k>;
diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts
index 62981b39c815..a57351270551 100644
--- a/arch/arm/boot/dts/at91sam9rlek.dts
+++ b/arch/arm/boot/dts/at91sam9rlek.dts
@@ -180,7 +180,7 @@
 			spi0: spi@fffcc000 {
 				status = "okay";
 				cs-gpios = <&pioA 28 0>, <0>, <0>, <0>;
-				mtd_dataflash@0 {
+				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <15000000>;
 					reg = <0>;
@@ -212,6 +212,10 @@
 				status = "okay";
 			};
 
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+			};
+
 			rtc@fffffe00 {
 				status = "okay";
 			};
@@ -244,17 +248,17 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		right_click {
+		button-right-click {
 			label = "right_click";
 			gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
 			linux,code = <273>;
 			wakeup-source;
 		};
 
-		left_click {
+		button-left-click {
 			label = "left_click";
 			gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
 			linux,code = <272>;
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 395e883644cd..0c26c925761b 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -13,6 +13,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	#address-cells = <1>;
@@ -134,7 +135,7 @@
 				clock-names = "slow_clk", "main_xtal";
 			};
 
-			reset_controller: rstc@fffffe00 {
+			reset_controller: reset-controller@fffffe00 {
 				compatible = "atmel,at91sam9g45-rstc";
 				reg = <0xfffffe00 0x10>;
 				clocks = <&clk32k>;
@@ -674,6 +675,7 @@
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
@@ -688,6 +690,7 @@
 			usart0: serial@f801c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf801c000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart0>;
@@ -702,6 +705,7 @@
 			usart1: serial@f8020000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8020000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart1>;
@@ -716,6 +720,7 @@
 			usart2: serial@f8024000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8024000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart2>;
@@ -775,6 +780,7 @@
 			uart0: serial@f8040000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8040000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart0>;
@@ -786,6 +792,7 @@
 			uart1: serial@f8044000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8044000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart1>;
diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
index 098d3fef5c37..a47c765e1b20 100644
--- a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
@@ -8,6 +8,7 @@
 
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	aliases {
@@ -44,6 +45,7 @@
 			usart3: serial@f8028000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8028000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart3>;
diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi
index 6d1264de6060..5f4eaa618ab4 100644
--- a/arch/arm/boot/dts/at91sam9x5ek.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi
@@ -125,7 +125,7 @@
 	cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
 	status = "disabled"; /* conflicts with mmc1 */
 
-	m25p80@0 {
+	flash@0 {
 		compatible = "atmel,at25df321a";
 		spi-max-frequency = <50000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/axm5516-cpus.dtsi b/arch/arm/boot/dts/axm5516-cpus.dtsi
index 3bcf4e0a3c85..f13ef80b6637 100644
--- a/arch/arm/boot/dts/axm5516-cpus.dtsi
+++ b/arch/arm/boot/dts/axm5516-cpus.dtsi
@@ -73,7 +73,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x00>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -81,7 +81,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x01>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -89,7 +89,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x02>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -97,7 +97,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x03>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -105,7 +105,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x100>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -113,7 +113,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x101>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -121,7 +121,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x102>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -129,7 +129,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x103>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -137,7 +137,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x200>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -145,7 +145,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x201>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -153,7 +153,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x202>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -161,7 +161,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x203>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -169,7 +169,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x300>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -177,7 +177,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x301>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -185,7 +185,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x302>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -193,7 +193,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x303>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 	};
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index ad65be871938..f9f79ed82518 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -397,8 +397,8 @@
 			#size-cells = <0>;
 			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-0 = <&spi_0>;
-			clocks = <&axi81_clk>;
-			clock-names = "apb_pclk";
+			clocks = <&axi81_clk>, <&axi81_clk>;
+			clock-names = "sspclk", "apb_pclk";
 			status = "disabled";
 		};
 
@@ -409,8 +409,8 @@
 			#size-cells = <0>;
 			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-0 = <&spi_1>;
-			clocks = <&axi81_clk>;
-			clock-names = "apb_pclk";
+			clocks = <&axi81_clk>, <&axi81_clk>;
+			clock-names = "sspclk", "apb_pclk";
 			status = "disabled";
 		};
 
@@ -421,8 +421,8 @@
 			#size-cells = <0>;
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-0 = <&spi_2>;
-			clocks = <&axi81_clk>;
-			clock-names = "apb_pclk";
+			clocks = <&axi81_clk>, <&axi81_clk>;
+			clock-names = "sspclk", "apb_pclk";
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
index 6197e7d80e3b..53696078bbf0 100644
--- a/arch/arm/boot/dts/bcm11351.dtsi
+++ b/arch/arm/boot/dts/bcm11351.dtsi
@@ -1,15 +1,5 @@
-/*
- * Copyright (C) 2012-2013 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2012-2013 Broadcom Corporation
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
diff --git a/arch/arm/boot/dts/bcm21664-garnet.dts b/arch/arm/boot/dts/bcm21664-garnet.dts
index be468f4adc37..1854cd907a1b 100644
--- a/arch/arm/boot/dts/bcm21664-garnet.dts
+++ b/arch/arm/boot/dts/bcm21664-garnet.dts
@@ -1,15 +1,5 @@
-/*
- * Copyright (C) 2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2014 Broadcom Corporation
 
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/bcm21664.dtsi b/arch/arm/boot/dts/bcm21664.dtsi
index cc58f2b926b9..2684c37cb3a0 100644
--- a/arch/arm/boot/dts/bcm21664.dtsi
+++ b/arch/arm/boot/dts/bcm21664.dtsi
@@ -1,15 +1,5 @@
-/*
- * Copyright (C) 2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2014 Broadcom Corporation
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
diff --git a/arch/arm/boot/dts/bcm2711-rpi-400.dts b/arch/arm/boot/dts/bcm2711-rpi-400.dts
index f4d2fc20397c..c53d9eb0b802 100644
--- a/arch/arm/boot/dts/bcm2711-rpi-400.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-400.dts
@@ -28,12 +28,12 @@
 &expgpio {
 	gpio-line-names = "BT_ON",
 			  "WL_ON",
-			  "",
+			  "PWR_LED_OFF",
 			  "GLOBAL_RESET",
 			  "VDD_SD_IO_SEL",
-			  "CAM_GPIO",
+			  "GLOBAL_SHUTDOWN",
 			  "SD_PWR_ON",
-			  "SD_OC_N";
+			  "SHUTDOWN_REQUEST";
 };
 
 &genet_mdio {
diff --git a/arch/arm/boot/dts/bcm2711-rpi.dtsi b/arch/arm/boot/dts/bcm2711-rpi.dtsi
index ca266c5d9f9b..98817a6675b9 100644
--- a/arch/arm/boot/dts/bcm2711-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2711-rpi.dtsi
@@ -69,6 +69,10 @@
 	};
 };
 
+&v3d {
+	clocks = <&firmware_clocks 5>;
+};
+
 &vchiq {
 	interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 };
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index dff18fc9a906..941c4d16791b 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -107,12 +107,13 @@
 		};
 
 		pm: watchdog@7e100000 {
-			compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
+			compatible = "brcm,bcm2711-pm", "brcm,bcm2835-pm-wdt";
 			#power-domain-cells = <1>;
 			#reset-cells = <1>;
 			reg = <0x7e100000 0x114>,
 			      <0x7e00a000 0x24>,
 			      <0x7ec11000 0x20>;
+			reg-names = "pm", "asb", "rpivid_asb";
 			clocks = <&clocks BCM2835_CLOCK_V3D>,
 				 <&clocks BCM2835_CLOCK_PERI_IMAGE>,
 				 <&clocks BCM2835_CLOCK_H264>,
@@ -290,6 +291,7 @@
 
 		hvs: hvs@7e400000 {
 			compatible = "brcm,bcm2711-hvs";
+			reg = <0x7e400000 0x8000>;
 			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
@@ -458,12 +460,26 @@
 		#size-cells = <0>;
 		enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
 
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 * https://developer.arm.com/documentation/100095/0003
+		 * /Level-1-Memory-System/About-the-L1-memory-system?lang=en
+		 * Source for d/i-cache-size
+		 * https://www.raspberrypi.com/documentation/computers
+		 * /processors.html#bcm2711
+		 */
 		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72";
 			reg = <0>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000d8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu1: cpu@1 {
@@ -472,6 +488,13 @@
 			reg = <1>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000e0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu2: cpu@2 {
@@ -480,6 +503,13 @@
 			reg = <2>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000e8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu3: cpu@3 {
@@ -488,6 +518,28 @@
 			reg = <3>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000f0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
+		};
+
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 *  https://developer.arm.com/documentation/100095/0003
+		 *  /Level-2-Memory-System/About-the-L2-memory-system?lang=en
+		 *  Source for d/i-cache-size
+		 *  https://www.raspberrypi.com/documentation/computers
+		 *  /processors.html#bcm2711
+		 */
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>; // 1MiB(size)/64(line-size)=16384ways/16-way set
+			cache-level = <2>;
 		};
 	};
 
@@ -550,6 +602,17 @@
 				#size-cells = <0x0>;
 			};
 		};
+
+		v3d: gpu@7ec00000 {
+			compatible = "brcm,2711-v3d";
+			reg = <0x0 0x7ec00000 0x4000>,
+			      <0x0 0x7ec04000 0x4000>;
+			reg-names = "hub", "core0";
+
+			power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
+			resets = <&pm BCM2835_RESET_V3D>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts
index ead6e9804dbf..fce3d5260b00 100644
--- a/arch/arm/boot/dts/bcm28155-ap.dts
+++ b/arch/arm/boot/dts/bcm28155-ap.dts
@@ -1,15 +1,5 @@
-/*
- * Copyright (C) 2013 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2013 Broadcom Corporation
 
 /dts-v1/;
 
@@ -31,22 +21,22 @@
 	};
 
 	i2c@3e016000 {
-		status="okay";
+		status = "okay";
 		clock-frequency = <400000>;
 	};
 
 	i2c@3e017000 {
-		status="okay";
+		status = "okay";
 		clock-frequency = <400000>;
 	};
 
 	i2c@3e018000 {
-		status="okay";
+		status = "okay";
 		clock-frequency = <400000>;
 	};
 
 	i2c@3500d000 {
-		status="okay";
+		status = "okay";
 		clock-frequency = <100000>;
 
 		pmu: pmu@8 {
diff --git a/arch/arm/boot/dts/bcm2835-common.dtsi b/arch/arm/boot/dts/bcm2835-common.dtsi
index c25e797b9060..a037d2bc5b11 100644
--- a/arch/arm/boot/dts/bcm2835-common.dtsi
+++ b/arch/arm/boot/dts/bcm2835-common.dtsi
@@ -62,6 +62,7 @@
 			#reset-cells = <1>;
 			reg = <0x7e100000 0x114>,
 			      <0x7e00a000 0x24>;
+			reg-names = "pm", "asb";
 			clocks = <&clocks BCM2835_CLOCK_V3D>,
 				 <&clocks BCM2835_CLOCK_PERI_IMAGE>,
 				 <&clocks BCM2835_CLOCK_H264>,
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
index 40b9405f1a8e..9b9a18bbb20a 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
@@ -32,7 +32,6 @@
 	 * This is based on the unreleased schematic for the Model A+.
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
@@ -67,21 +66,21 @@
 			  "GPIO27",
 			  "SDA0",
 			  "SCL0",
-			  "NC", /* GPIO30 */
-			  "NC", /* GPIO31 */
+			  "", /* GPIO30 */
+			  "", /* GPIO31 */
 			  "CAM_GPIO1", /* GPIO32 */
-			  "NC", /* GPIO33 */
-			  "NC", /* GPIO34 */
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
 			  "PWR_LOW_N", /* GPIO35 */
-			  "NC", /* GPIO36 */
-			  "NC", /* GPIO37 */
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
 			  "USB_LIMIT", /* GPIO38 */
-			  "NC", /* GPIO39 */
+			  "", /* GPIO39 */
 			  "PWM0_OUT", /* GPIO40 */
 			  "CAM_GPIO0", /* GPIO41 */
-			  "NC", /* GPIO42 */
-			  "NC", /* GPIO43 */
-			  "NC", /* GPIO44 */
+			  "", /* GPIO42 */
+			  "", /* GPIO43 */
+			  "", /* GPIO44 */
 			  "PWM1_OUT", /* GPIO45 */
 			  "HDMI_HPD_N",
 			  "STATUS_LED",
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts
index 11edb581dbaf..f664e4fced93 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts
@@ -26,7 +26,6 @@
 	 * RPI00021 sheet 02
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
@@ -42,41 +41,41 @@
 			  "SPI_MISO",
 			  "SPI_MOSI",
 			  "SPI_SCLK",
-			  "NC", /* GPIO12 */
-			  "NC", /* GPIO13 */
+			  "", /* GPIO12 */
+			  "", /* GPIO13 */
 			  /* Serial port */
 			  "TXD0",
 			  "RXD0",
 			  "STATUS_LED_N",
 			  "GPIO17",
 			  "GPIO18",
-			  "NC", /* GPIO19 */
-			  "NC", /* GPIO20 */
+			  "", /* GPIO19 */
+			  "", /* GPIO20 */
 			  "GPIO21",
 			  "GPIO22",
 			  "GPIO23",
 			  "GPIO24",
 			  "GPIO25",
-			  "NC", /* GPIO26 */
+			  "", /* GPIO26 */
 			  "CAM_GPIO0",
 			  /* Binary number representing build/revision */
 			  "CONFIG0",
 			  "CONFIG1",
 			  "CONFIG2",
 			  "CONFIG3",
-			  "NC", /* GPIO32 */
-			  "NC", /* GPIO33 */
-			  "NC", /* GPIO34 */
-			  "NC", /* GPIO35 */
-			  "NC", /* GPIO36 */
-			  "NC", /* GPIO37 */
-			  "NC", /* GPIO38 */
-			  "NC", /* GPIO39 */
+			  "", /* GPIO32 */
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "", /* GPIO35 */
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "", /* GPIO38 */
+			  "", /* GPIO39 */
 			  "PWM0_OUT",
-			  "NC", /* GPIO41 */
-			  "NC", /* GPIO42 */
-			  "NC", /* GPIO43 */
-			  "NC", /* GPIO44 */
+			  "", /* GPIO41 */
+			  "", /* GPIO42 */
+			  "", /* GPIO43 */
+			  "", /* GPIO44 */
 			  "PWM1_OUT",
 			  "HDMI_HPD_P",
 			  "SD_CARD_DET",
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
index 1b435c64bd9c..248feb2ed23d 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
@@ -34,7 +34,6 @@
 	 * RPI-BPLUS sheet 1
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
@@ -69,21 +68,21 @@
 			  "GPIO27",
 			  "SDA0",
 			  "SCL0",
-			  "NC", /* GPIO30 */
+			  "", /* GPIO30 */
 			  "LAN_RUN", /* GPIO31 */
 			  "CAM_GPIO1", /* GPIO32 */
-			  "NC", /* GPIO33 */
-			  "NC", /* GPIO34 */
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
 			  "PWR_LOW_N", /* GPIO35 */
-			  "NC", /* GPIO36 */
-			  "NC", /* GPIO37 */
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
 			  "USB_LIMIT", /* GPIO38 */
-			  "NC", /* GPIO39 */
+			  "", /* GPIO39 */
 			  "PWM0_OUT", /* GPIO40 */
 			  "CAM_GPIO0", /* GPIO41 */
-			  "NC", /* GPIO42 */
-			  "NC", /* GPIO43 */
-			  "ETHCLK", /* GPIO44 */
+			  "", /* GPIO42 */
+			  "", /* GPIO43 */
+			  "ETH_CLK", /* GPIO44 */
 			  "PWM1_OUT", /* GPIO45 */
 			  "HDMI_HPD_N",
 			  "STATUS_LED",
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
index a23c25c00eea..f5b66d3f4ff3 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
@@ -27,7 +27,6 @@
 	 * RPI00022 sheet 02
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
@@ -43,40 +42,40 @@
 			  "SPI_MISO",
 			  "SPI_MOSI",
 			  "SPI_SCLK",
-			  "NC", /* GPIO12 */
-			  "NC", /* GPIO13 */
+			  "", /* GPIO12 */
+			  "", /* GPIO13 */
 			  /* Serial port */
 			  "TXD0",
 			  "RXD0",
 			  "STATUS_LED_N",
 			  "GPIO17",
 			  "GPIO18",
-			  "NC", /* GPIO19 */
-			  "NC", /* GPIO20 */
+			  "", /* GPIO19 */
+			  "", /* GPIO20 */
 			  "CAM_GPIO",
 			  "GPIO22",
 			  "GPIO23",
 			  "GPIO24",
 			  "GPIO25",
-			  "NC", /* GPIO26 */
+			  "", /* GPIO26 */
 			  "GPIO27",
 			  "GPIO28",
 			  "GPIO29",
 			  "GPIO30",
 			  "GPIO31",
-			  "NC", /* GPIO32 */
-			  "NC", /* GPIO33 */
-			  "NC", /* GPIO34 */
-			  "NC", /* GPIO35 */
-			  "NC", /* GPIO36 */
-			  "NC", /* GPIO37 */
-			  "NC", /* GPIO38 */
-			  "NC", /* GPIO39 */
+			  "", /* GPIO32 */
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "", /* GPIO35 */
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "", /* GPIO38 */
+			  "", /* GPIO39 */
 			  "PWM0_OUT",
-			  "NC", /* GPIO41 */
-			  "NC", /* GPIO42 */
-			  "NC", /* GPIO43 */
-			  "NC", /* GPIO44 */
+			  "", /* GPIO41 */
+			  "", /* GPIO42 */
+			  "", /* GPIO43 */
+			  "", /* GPIO44 */
 			  "PWM1_OUT",
 			  "HDMI_HPD_P",
 			  "SD_CARD_DET",
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts
index 1b63d6b19750..f589bede2b11 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
@@ -27,7 +27,6 @@
 	 * RPI00021 sheet 02
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
@@ -43,41 +42,40 @@
 			  "SPI_MISO",
 			  "SPI_MOSI",
 			  "SPI_SCLK",
-			  "NC", /* GPIO12 */
-			  "NC", /* GPIO13 */
+			  "", /* GPIO12 */
+			  "", /* GPIO13 */
 			  /* Serial port */
 			  "TXD0",
 			  "RXD0",
 			  "STATUS_LED_N",
 			  "GPIO17",
 			  "GPIO18",
-			  "NC", /* GPIO19 */
-			  "NC", /* GPIO20 */
-			  "GPIO21",
+			  "", /* GPIO19 */
+			  "", /* GPIO20 */
+			  "CAM_GPIO0",
 			  "GPIO22",
 			  "GPIO23",
 			  "GPIO24",
 			  "GPIO25",
-			  "NC", /* GPIO26 */
-			  "CAM_GPIO0",
-			  /* Binary number representing build/revision */
-			  "CONFIG0",
-			  "CONFIG1",
-			  "CONFIG2",
-			  "CONFIG3",
-			  "NC", /* GPIO32 */
-			  "NC", /* GPIO33 */
-			  "NC", /* GPIO34 */
-			  "NC", /* GPIO35 */
-			  "NC", /* GPIO36 */
-			  "NC", /* GPIO37 */
-			  "NC", /* GPIO38 */
-			  "NC", /* GPIO39 */
+			  "", /* GPIO26 */
+			  "GPIO27",
+			  "GPIO28",
+			  "GPIO29",
+			  "GPIO30",
+			  "GPIO31",
+			  "", /* GPIO32 */
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "", /* GPIO35 */
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "", /* GPIO38 */
+			  "", /* GPIO39 */
 			  "PWM0_OUT",
-			  "NC", /* GPIO41 */
-			  "NC", /* GPIO42 */
-			  "NC", /* GPIO43 */
-			  "NC", /* GPIO44 */
+			  "", /* GPIO41 */
+			  "", /* GPIO42 */
+			  "", /* GPIO43 */
+			  "", /* GPIO44 */
 			  "PWM1_OUT",
 			  "HDMI_HPD_P",
 			  "SD_CARD_DET",
diff --git a/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts b/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts
index a75c882e6575..87958a96c3e0 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts
@@ -13,7 +13,6 @@
 	 * This is based on the official GPU firmware DT blob.
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
index 243236bc1e00..596bb1ef994e 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
@@ -39,7 +39,6 @@
 	 * This is based on the official GPU firmware DT blob.
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
@@ -74,19 +73,21 @@
 			  "GPIO27",
 			  "SDA0",
 			  "SCL0",
-			  "NC", /* GPIO30 */
-			  "NC", /* GPIO31 */
-			  "NC", /* GPIO32 */
-			  "NC", /* GPIO33 */
-			  "NC", /* GPIO34 */
-			  "NC", /* GPIO35 */
-			  "NC", /* GPIO36 */
-			  "NC", /* GPIO37 */
-			  "NC", /* GPIO38 */
-			  "NC", /* GPIO39 */
+			  /* Used by BT module */
+			  "CTS0",
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
 			  "CAM_GPIO1", /* GPIO40 */
 			  "WL_ON", /* GPIO41 */
-			  "NC", /* GPIO42 */
+			  "", /* GPIO42 */
 			  "WIFI_CLK", /* GPIO43 */
 			  "CAM_GPIO0", /* GPIO44 */
 			  "BT_ON", /* GPIO45 */
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
index 6f9b3a908f28..a65c2bca69ea 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
@@ -29,7 +29,6 @@
 	 * This is based on the official GPU firmware DT blob.
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
@@ -64,22 +63,22 @@
 			  "GPIO27",
 			  "SDA0",
 			  "SCL0",
-			  "NC", /* GPIO30 */
-			  "NC", /* GPIO31 */
+			  "", /* GPIO30 */
+			  "", /* GPIO31 */
 			  "CAM_GPIO1", /* GPIO32 */
-			  "NC", /* GPIO33 */
-			  "NC", /* GPIO34 */
-			  "NC", /* GPIO35 */
-			  "NC", /* GPIO36 */
-			  "NC", /* GPIO37 */
-			  "NC", /* GPIO38 */
-			  "NC", /* GPIO39 */
-			  "NC", /* GPIO40 */
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "", /* GPIO35 */
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "", /* GPIO38 */
+			  "", /* GPIO39 */
+			  "", /* GPIO40 */
 			  "CAM_GPIO0", /* GPIO41 */
-			  "NC", /* GPIO42 */
-			  "NC", /* GPIO43 */
-			  "NC", /* GPIO44 */
-			  "NC", /* GPIO45 */
+			  "", /* GPIO42 */
+			  "", /* GPIO43 */
+			  "", /* GPIO44 */
+			  "", /* GPIO45 */
 			  "HDMI_HPD_N",
 			  "STATUS_LED_N",
 			  /* Used by SD Card */
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index 0549686134ea..1c90e5a44283 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -14,6 +14,23 @@
 			device_type = "cpu";
 			compatible = "arm,arm1176jzf-s";
 			reg = <0x0>;
+			/* Source for d/i-cache-line-size and d/i-cache-sets
+			 * https://developer.arm.com/documentation/ddi0301
+			 * /h/level-one-memory-system/cache-organization?lang=en
+			 *
+			 * Source for d/i-cache-size
+			 * https://forums.raspberrypi.com/viewtopic.php?t=98428
+			 *
+			 * NOTE: The BCM2835 has a L2 cache but it is dedicated to the GPU
+			 * It can be shared with the CPU through fw settings,
+			 * but this is not recommended.
+			 */
+			d-cache-size = <0x4000>;
+			d-cache-line-size = <16>;
+			d-cache-sets = <256>; // 16KiB(size)/16(line-size)=1024ways/4-way set
+			i-cache-size = <0x4000>;
+			i-cache-line-size = <16>;
+			i-cache-sets = <256>; // 16KiB(size)/16(line-size)=1024ways/4-way set
 		};
 	};
 
diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
index d8af8eeac7b6..3635502b1e0a 100644
--- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
+++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
@@ -34,7 +34,6 @@
 	 * the official GPU firmware DT blob.
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
@@ -83,7 +82,7 @@
 			  "CAM_GPIO0",
 			  "SMPS_SCL",
 			  "SMPS_SDA",
-			  "ETHCLK",
+			  "ETH_CLK",
 			  "PWM1_OUT",
 			  "HDMI_HPD_N",
 			  "STATUS_LED",
diff --git a/arch/arm/boot/dts/bcm2836.dtsi b/arch/arm/boot/dts/bcm2836.dtsi
index b390006aef79..534dacfc4dd5 100644
--- a/arch/arm/boot/dts/bcm2836.dtsi
+++ b/arch/arm/boot/dts/bcm2836.dtsi
@@ -41,11 +41,26 @@
 		#size-cells = <0>;
 		enable-method = "brcm,bcm2836-smp";
 
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 * https://developer.arm.com/documentation/ddi0464/f/L1-Memory-System
+		 * /About-the-L1-memory-system?lang=en
+		 *
+		 * Source for d/i-cache-size
+		 * https://forums.raspberrypi.com/viewtopic.php?t=98428
+		 */
+
 		v7_cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0xf00>;
 			clock-frequency = <800000000>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <32>;
+			i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
+			next-level-cache = <&l2>;
 		};
 
 		v7_cpu1: cpu@1 {
@@ -53,6 +68,13 @@
 			compatible = "arm,cortex-a7";
 			reg = <0xf01>;
 			clock-frequency = <800000000>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <32>;
+			i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
+			next-level-cache = <&l2>;
 		};
 
 		v7_cpu2: cpu@2 {
@@ -60,6 +82,13 @@
 			compatible = "arm,cortex-a7";
 			reg = <0xf02>;
 			clock-frequency = <800000000>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <32>;
+			i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
+			next-level-cache = <&l2>;
 		};
 
 		v7_cpu3: cpu@3 {
@@ -67,6 +96,27 @@
 			compatible = "arm,cortex-a7";
 			reg = <0xf03>;
 			clock-frequency = <800000000>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <32>;
+			i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		/* Source for cache-line-size + cache-sets
+		 * https://developer.arm.com/documentation/ddi0464/f/L2-Memory-System
+		 * /About-the-L2-Memory-system?lang=en
+		 * Source for cache-size
+		 * https://forums.raspberrypi.com/viewtopic.php?t=98428
+		 */
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>; // 512KiB(size)/64(line-size)=8192ways/8-way set
+			cache-level = <2>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
index d73daf5bff1d..f7222a28903e 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
@@ -55,7 +55,6 @@
 	 * This is mostly based on the official GPU firmware DT blob.
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
index e12938baaf12..ec721d323ac5 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
@@ -45,7 +45,7 @@
 		#gpio-cells = <2>;
 		gpio-line-names = "BT_ON",
 				  "WL_ON",
-				  "STATUS_LED_R",
+				  "PWR_LED_R",
 				  "LAN_RUN",
 				  "",
 				  "CAM_GPIO0",
@@ -61,7 +61,6 @@
 	 * the official GPU firmware DT blob.
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
@@ -110,7 +109,7 @@
 			  "SD1_DATA3",
 			  "PWM0_OUT",
 			  "PWM1_OUT",
-			  "ETHCLK",
+			  "ETH_CLK",
 			  "WIFI_CLK",
 			  "SDA0",
 			  "SCL0",
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
index 42b5383b55d8..fb6a417d73e7 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
@@ -54,7 +54,6 @@
 	 * the official GPU firmware DT blob.
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
@@ -103,7 +102,7 @@
 			  "SD1_DATA3",
 			  "PWM0_OUT",
 			  "PWM1_OUT",
-			  "ETHCLK",
+			  "ETH_CLK",
 			  "WIFI_CLK",
 			  "SDA0",
 			  "SCL0",
diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts b/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
index 588d9411ceb6..cf84e69fced8 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
@@ -13,7 +13,6 @@
 	 * This is based on the official GPU firmware DT blob.
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
@@ -63,8 +62,8 @@
 			  "GPIO43",
 			  "GPIO44",
 			  "GPIO45",
-			  "GPIO46",
-			  "GPIO47",
+			  "SMPS_SCL",
+			  "SMPS_SDA",
 			  /* Used by eMMC */
 			  "SD_CLK_R",
 			  "SD_CMD_R",
diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
index 828a20561b96..f57b4ca145dd 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
+++ b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
@@ -41,12 +41,12 @@
 		#gpio-cells = <2>;
 		gpio-line-names = "HDMI_HPD_N",
 				  "EMMC_EN_N",
-				  "NC",
-				  "NC",
-				  "NC",
-				  "NC",
-				  "NC",
-				  "NC";
+				  "",
+				  "",
+				  "",
+				  "",
+				  "",
+				  "";
 		status = "okay";
 	};
 };
diff --git a/arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts b/arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts
new file mode 100644
index 000000000000..4a768562985e
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2022 Stefan Wahren <stefan.wahren@i2se.com>
+ */
+
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-usb-otg.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-zero-2-w", "brcm,bcm2837";
+	model = "Raspberry Pi Zero 2 W";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
+	leds {
+		led-act {
+			gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&bt {
+	shutdown-gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+};
+
+&gpio {
+	/*
+	 * This is based on the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "HDMI_HPD_N",
+			  "STATUS_LED_N",
+			  "NC", /* GPIO30 */
+			  "NC", /* GPIO31 */
+			  "NC", /* GPIO32 */
+			  "NC", /* GPIO33 */
+			  "NC", /* GPIO34 */
+			  "NC", /* GPIO35 */
+			  "NC", /* GPIO36 */
+			  "NC", /* GPIO37 */
+			  "NC", /* GPIO38 */
+			  "NC", /* GPIO39 */
+			  "CAM_GPIO0", /* GPIO40 */
+			  "WL_ON", /* GPIO41 */
+			  "BT_ON", /* GPIO42 */
+			  "WIFI_CLK", /* GPIO43 */
+			  "SDA0", /* GPIO44 */
+			  "SCL0", /* GPIO45 */
+			  "SMPS_SCL",
+			  "SMPS_SDA",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0>;
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&sdhci {
+	pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio32 &uart0_ctsrts_gpio30>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};
+
+&wifi_pwrseq {
+	reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi
index 0199ec98cd61..5dbdebc46259 100644
--- a/arch/arm/boot/dts/bcm2837.dtsi
+++ b/arch/arm/boot/dts/bcm2837.dtsi
@@ -40,12 +40,26 @@
 		#size-cells = <0>;
 		enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
 
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 * https://developer.arm.com/documentation/ddi0500/e/level-1-memory-system
+		 * /about-the-l1-memory-system?lang=en
+		 *
+		 * Source for d/i-cache-size
+		 * https://magpi.raspberrypi.com/articles/raspberry-pi-3-specs-benchmarks
+		 */
 		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000d8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu1: cpu@1 {
@@ -54,6 +68,13 @@
 			reg = <1>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000e0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu2: cpu@2 {
@@ -62,6 +83,13 @@
 			reg = <2>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000e8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu3: cpu@3 {
@@ -70,6 +98,27 @@
 			reg = <3>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000f0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		/* Source for cache-line-size + cache-sets
+		 * https://developer.arm.com/documentation/ddi0500
+		 * /e/level-2-memory-system/about-the-l2-memory-system?lang=en
+		 * Source for cache-size
+		 * https://datasheets.raspberrypi.com/cm/cm1-and-cm3-datasheet.pdf
+		 */
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>; // 512KiB(size)/64(line-size)=8192ways/16-way set
+			cache-level = <2>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi b/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi
index 967e081cb9c2..882b13807075 100644
--- a/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi
+++ b/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi
@@ -12,7 +12,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ethernet: usbether@1 {
+		ethernet: ethernet@1 {
 			compatible = "usb424,ec00";
 			reg = <1>;
 		};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi b/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi
index dc7ae776db5f..4273b90b53cc 100644
--- a/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi
+++ b/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi
@@ -11,7 +11,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ethernet: usbether@1 {
+		ethernet: ethernet@1 {
 			compatible = "usb424,ec00";
 			reg = <1>;
 		};
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index c113661a6668..d2d9c6e67f39 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -50,9 +50,9 @@
 
 			trips {
 				cpu-crit {
-					temperature	= <90000>;
-					hysteresis	= <0>;
-					type		= "critical";
+					temperature = <90000>;
+					hysteresis = <0>;
+					type = "critical";
 				};
 			};
 
@@ -352,8 +352,6 @@
 			clocks = <&clocks BCM2835_CLOCK_VPU>,
 				 <&clocks BCM2835_CLOCK_DPI>;
 			clock-names = "core", "pixel";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
index 8ed403767540..09ee3e46c0cc 100644
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
@@ -70,19 +70,19 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
index 667b118ba4ee..32619c6045d3 100644
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
@@ -54,25 +54,25 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		brightness {
+		button-brightness {
 			label = "Backlight";
 			linux,code = <KEY_BRIGHTNESS_ZERO>;
 			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
new file mode 100644
index 000000000000..a658b9b7bcec
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Buffalo WZR-1166DHP and WZR-1166DHP2
+ *
+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
+ * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com>
+ */
+
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	spi {
+		compatible = "spi-gpio";
+		num-chipselects = <1>;
+		gpio-sck = <&chipcommon 7 0>;
+		gpio-mosi = <&chipcommon 4 0>;
+		cs-gpios = <&chipcommon 6 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hc595: gpio_spi@0 {
+			compatible = "fairchild,74hc595";
+			reg = <0>;
+			registers-number = <1>;
+			spi-max-frequency = <100000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		usb {
+			/* label = "bcm53xx:blue:usb"; */
+			function = LED_FUNCTION_USB;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>, <&ohci_port2>,
+					  <&ehci_port2>;
+			linux,default-trigger = "usbport";
+		};
+
+		power0 {
+			/* label = "bcm53xx:red:power"; */
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		power1 {
+			/* label = "bcm53xx:white:power"; */
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		router0 {
+			/*  label = "bcm53xx:blue:router"; */
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		router1 {
+			/* label = "bcm53xx:amber:router"; */
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		wan {
+			/* label = "bcm53xx:blue:wan"; */
+			function = LED_FUNCTION_WAN;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		wireless0 {
+			/* label = "bcm53xx:blue:wireless"; */
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		wireless1 {
+			/* label = "bcm53xx:amber:wireless"; */
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		button-aoss {
+			label = "AOSS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Commit mode set by switch? */
+		button-mode {
+			label = "Mode";
+			linux,code = <KEY_SETUP>;
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Switch: AP mode */
+		button-sw-ap {
+			label = "AP";
+			linux,code = <BTN_0>;
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+
+		button-eject {
+			label = "USB eject";
+			linux,code = <KEY_EJECTCD>;
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "lan1";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan2";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan3";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan4";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "wan";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp.dts
new file mode 100644
index 000000000000..8e506269fa1a
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindigs for Buffalo WZR-1166DHP
+ *
+ * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708-buffalo-wzr-1166dhp-common.dtsi"
+
+/ {
+	compatible = "buffalo,wzr-1166dhp", "brcm,bcm4708";
+	model = "Buffalo WZR-1166DHP";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+};
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp2.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp2.dts
new file mode 100644
index 000000000000..596129027074
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp2.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindigs for Buffalo WZR-1166DHP2
+ *
+ * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708-buffalo-wzr-1166dhp-common.dtsi"
+
+/ {
+	compatible = "buffalo,wzr-1166dhp2", "brcm,bcm4708";
+	model = "Buffalo WZR-1166DHP2";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+};
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
index ff31ce45831a..f8f53457dd43 100644
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
@@ -100,33 +100,33 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
 
-		aoss {
+		button-aoss {
 			label = "AOSS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
 		};
 
 		/* Commit mode set by switch? */
-		mode {
+		button-mode {
 			label = "Mode";
 			linux,code = <KEY_SETUP>;
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 		};
 
 		/* Switch: AP mode */
-		sw_ap {
+		button-sw-ap {
 			label = "AP";
 			linux,code = <BTN_0>;
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
 
-		eject {
+		button-eject {
 			label = "USB eject";
 			linux,code = <KEY_EJECTCD>;
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
index 5bac1e15775a..0ed25bf71f0d 100644
--- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
@@ -29,13 +29,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
index cd797b4202ad..f1412ba83def 100644
--- a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
@@ -25,13 +25,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
index 5b4a481be4f4..14ee410183af 100644
--- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
@@ -45,7 +45,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
index c81944cd6d0b..600ab087f5e5 100644
--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
@@ -52,7 +52,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
index 43a5d675dd67..fd6d8d2a4456 100644
--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -63,19 +63,19 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 		};
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
index 4c60eda296d9..76fc1099d47d 100644
--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
@@ -59,19 +59,19 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 		};
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
index 9ca6d1b2590d..6bcdfb73cb9e 100644
--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
@@ -94,19 +94,19 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
index 0e273c598732..ca47cc4f2ba1 100644
--- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
@@ -60,13 +60,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
index d00495a8b6fc..0edc2543e568 100644
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
@@ -91,26 +91,26 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		aoss {
+		button-aoss {
 			label = "AOSS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
 
 		/* Switch device mode? */
-		mode {
+		button-mode {
 			label = "Mode";
 			linux,code = <KEY_SETUP>;
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
 
-		eject {
+		button-eject {
 			label = "USB eject";
 			linux,code = <KEY_EJECTCD>;
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
index 8b1a05a0f1a1..1f0998f34afd 100644
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
@@ -96,7 +96,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
index 68aaf0af3945..c8c02377543b 100644
--- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
@@ -45,7 +45,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
index 9316a36434f7..3b35a7af4b1c 100644
--- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
@@ -94,7 +94,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
index 12e34a0439b4..19a7971b5a00 100644
--- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
@@ -77,13 +77,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
index 7546c8d07bcd..f52a75c4ca09 100644
--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
@@ -47,16 +47,14 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
index beae9eab9cb8..5ff6c588e16e 100644
--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
@@ -77,42 +77,40 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		power {
+		button-power {
 			label = "Power";
 			linux,code = <KEY_POWER>;
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
 		};
 
-		aoss {
+		button-aoss {
 			label = "AOSS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
 		};
 
 		/* Commit mode set by switch? */
-		mode {
+		button-mode {
 			label = "Mode";
 			linux,code = <KEY_SETUP>;
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
 		};
 
 		/* Switch: AP mode */
-		sw_ap {
+		button-sw-ap {
 			label = "AP";
 			linux,code = <BTN_0>;
 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
 		};
 
-		eject {
+		button-eject {
 			label = "USB eject";
 			linux,code = <KEY_EJECTCD>;
 			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
index 7879f7d7d9c3..99253fd7adb3 100644
--- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
+++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
@@ -29,16 +29,14 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
index 56d309dbc6b0..de961fbb6200 100644
--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
@@ -72,22 +72,20 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 		};
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
index 89f992af61d1..087f7f60de18 100644
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -99,28 +99,26 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
 		};
 
-		brightness {
+		button-brightness {
 			label = "Backlight";
 			linux,code = <KEY_BRIGHTNESS_ZERO>;
 			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
index c2a266a439d0..11d1068160da 100644
--- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
@@ -77,16 +77,14 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
index 249476fdad7a..a5fec56d11c0 100644
--- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
+++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright (C) 2021 Arınç ÜNAL <arinc.unal@arinc9.com>
+ * Copyright (C) 2021-2022 Arınç ÜNAL <arinc.unal@arinc9.com>
  */
 
 /dts-v1/;
@@ -25,6 +25,9 @@
 	nvram@1c080000 {
 		compatible = "brcm,nvram";
 		reg = <0x1c080000 0x00180000>;
+
+		et1macaddr: et1macaddr {
+		};
 	};
 
 	leds {
@@ -69,30 +72,106 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
 		};
 
-		reset {
+		button-reset {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
 
-		wifi {
+		button-wifi {
 			label = "Wi-Fi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
 		};
 
-		led {
+		button-led {
 			label = "Backlight";
 			linux,code = <KEY_BRIGHTNESS_ZERO>;
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	switch {
+		compatible = "realtek,rtl8365mb";
+		/* 7 = MDIO (has input reads), 6 = MDC (clock, output only) */
+		mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+		mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+		realtek,disable-leds;
+		dsa,member = <1 0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan5";
+				phy-handle = <&ethphy0>;
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan6";
+				phy-handle = <&ethphy1>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan7";
+				phy-handle = <&ethphy2>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan8";
+				phy-handle = <&ethphy3>;
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&sw0_p5>;
+				phy-mode = "rgmii";
+				tx-internal-delay-ps = <2000>;
+				rx-internal-delay-ps = <2100>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+					pause;
+				};
+			};
+		};
+
+		mdio {
+			compatible = "realtek,smi-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethphy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			ethphy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+
+			ethphy2: ethernet-phy@2 {
+				reg = <2>;
+			};
+
+			ethphy3: ethernet-phy@3 {
+				reg = <3>;
+			};
+		};
+	};
 };
 
 &srab {
@@ -101,9 +180,6 @@
 	dsa,member = <0 0>;
 
 	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		port@0 {
 			reg = <0>;
 			label = "lan4";
@@ -132,6 +208,7 @@
 		sw0_p5: port@5 {
 			reg = <5>;
 			label = "extsw";
+			phy-mode = "rgmii";
 
 			fixed-link {
 				speed = <1000>;
@@ -155,7 +232,6 @@
 			reg = <8>;
 			ethernet = <&gmac2>;
 			label = "cpu";
-			status = "disabled";
 
 			fixed-link {
 				speed = <1000>;
@@ -165,6 +241,15 @@
 	};
 };
 
+&gmac0 {
+	status = "disabled";
+};
+
+&gmac1 {
+	nvmem-cells = <&et1macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
 &usb2 {
 	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
 };
diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
index 60bfd52ee677..2c38b642a8b8 100644
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -86,20 +86,20 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
 		};
 
 		/* Switch: router / extender */
-		extender {
+		button-extender {
 			label = "Extender";
 			linux,code = <BTN_0>;
 			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
index 9bef6b9bfa8d..86c7cc0fa70e 100644
--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
@@ -30,19 +30,19 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		rfkill {
+		button-rfkill {
 				label = "WiFi";
 				linux,code = <KEY_RFKILL>;
 				gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
 		};
 
-		reset {
+		button-reset {
 				label = "Reset";
 				linux,code = <KEY_RESTART>;
 				gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
index b51a0ee7e584..9ad15bcae1ca 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
@@ -49,7 +49,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
index 6fa101f0a90d..ee24d3768536 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
@@ -43,7 +43,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
index b959a9504eea..6549d07b9887 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
@@ -49,7 +49,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
index b0d8a688141d..654fcce9fded 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
@@ -34,10 +34,8 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
index cbe8c8e4a301..bf053a2fcc7c 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
@@ -89,7 +89,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
index 24ae3c8a3e09..78a90dd57a4e 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
@@ -25,6 +25,9 @@
 	nvram@1eff0000 {
 		compatible = "brcm,nvram";
 		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+		};
 	};
 
 	leds {
@@ -64,7 +67,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
@@ -72,6 +75,11 @@
 	};
 };
 
+&gmac0 {
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
 &usb3 {
 	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
 };
diff --git a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
index 42097a4c2659..f850dce37b20 100644
--- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
@@ -65,25 +65,25 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		brightness {
+		button-brightness {
 			label = "Backlight";
 			linux,code = <KEY_BRIGHTNESS_ZERO>;
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
index a2566ad4619c..3bf6e24978ac 100644
--- a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
+++ b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
@@ -22,7 +22,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
index 57ca1cfaecd8..e20b6d2eb274 100644
--- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
@@ -39,7 +39,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
index 2e1a7e382cb7..9d863570fcf3 100644
--- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
@@ -49,7 +49,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
index 07eb3a8287d6..55b92645b0f1 100644
--- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
+++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
@@ -59,19 +59,19 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm47622.dtsi b/arch/arm/boot/dts/bcm47622.dtsi
new file mode 100644
index 000000000000..2df04528af82
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47622.dtsi
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm47622", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>,
+			<&CA7_2>, <&CA7_3>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm53015-meraki-mr26.dts b/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
new file mode 100644
index 000000000000..14f58033efeb
--- /dev/null
+++ b/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Meraki MR26 / Codename: Venom
+ *
+ * Copyright (C) 2022 Christian Lamparter <chunkeey@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "meraki,mr26", "brcm,bcm53015", "brcm,bcm4708";
+	model = "Meraki MR26";
+
+	memory@0 {
+		reg = <0x00000000 0x08000000>;
+		device_type = "memory";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+			panic-indicator;
+		};
+		led-1 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		key-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&uart0 {
+	clock-frequency = <50000000>;
+	/delete-property/ clocks;
+};
+
+&uart1 {
+	status = "disabled";
+};
+
+&gmac0 {
+	status = "okay";
+};
+
+&gmac1 {
+	status = "disabled";
+};
+&gmac2 {
+	status = "disabled";
+};
+&gmac3 {
+	status = "disabled";
+};
+
+&nandcs {
+	nand-ecc-algo = "hw";
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x200000>;
+			read-only;
+		};
+
+		partition@200000 {
+			label = "u-boot-env";
+			reg = <0x200000 0x200000>;
+			/* empty */
+		};
+
+		partition@400000 {
+			label = "u-boot-backup";
+			reg = <0x400000 0x200000>;
+			/* empty */
+		};
+
+		partition@600000 {
+			label = "u-boot-env-backup";
+			reg = <0x600000 0x200000>;
+			/* empty */
+		};
+
+		partition@800000 {
+			label = "ubi";
+			reg = <0x800000 0x7780000>;
+		};
+	};
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "poe";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+
+			fixed-link {
+				speed = <1000>;
+				duplex-full;
+			};
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinmux_i2c>;
+
+	clock-frequency = <100000>;
+
+	ina219@40 {
+		compatible = "ti,ina219"; /* PoE power */
+		reg = <0x40>;
+		shunt-resistor = <60000>; /* = 60 mOhms */
+	};
+
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+		pagesize = <32>;
+		read-only;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* it's empty */
+	};
+};
+
+&thermal {
+	status = "disabled";
+	/* does not work, reads 418 degree Celsius */
+};
diff --git a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
index 66c64a6ec414..e678bc03d816 100644
--- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
@@ -13,7 +13,7 @@
 #include <dt-bindings/leds/common.h>
 
 / {
-	compatible = "meraki,mr32", "brcm,brcm53016", "brcm,bcm4708";
+	compatible = "meraki,mr32", "brcm,bcm53016", "brcm,bcm4708";
 	model = "Meraki MR32";
 
 	chosen {
@@ -47,10 +47,8 @@
 
 	keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index 603c700c706f..5fc1b847f4aa 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -455,7 +455,7 @@
 				reg = <0x180 0x4>;
 			};
 
-			pinctrl: pin-controller@1c0 {
+			pinctrl: pinctrl@1c0 {
 				compatible = "brcm,bcm4708-pinmux";
 				reg = <0x1c0 0x24>;
 				reg-names = "cru_gpio_control";
@@ -568,9 +568,9 @@
 
 			trips {
 				cpu-crit {
-					temperature	= <125000>;
-					hysteresis	= <0>;
-					type		= "critical";
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
 				};
 			};
 
diff --git a/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts b/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts
index 2e7fda9b998c..975f854f652f 100644
--- a/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts
+++ b/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts
@@ -34,7 +34,7 @@
 	status = "okay";
 	bspi-sel = <0>;
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "m25p80";
 		reg = <0>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi
index cca49a2e2d62..b774a8d63813 100644
--- a/arch/arm/boot/dts/bcm63138.dtsi
+++ b/arch/arm/boot/dts/bcm63138.dtsi
@@ -9,8 +9,8 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
-	compatible = "brcm,bcm63138";
-	model = "Broadcom BCM63138 DSL SoC";
+	compatible = "brcm,bcm63138", "brcm,bcmbca";
+	model = "Broadcom BCM963138 Reference Board";
 	interrupt-parent = <&gic>;
 
 	aliases {
diff --git a/arch/arm/boot/dts/bcm63148.dtsi b/arch/arm/boot/dts/bcm63148.dtsi
new file mode 100644
index 000000000000..df5307b6b3af
--- /dev/null
+++ b/arch/arm/boot/dts/bcm63148.dtsi
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm63148", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		B15_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "brcm,brahma-b15";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B15_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "brcm,brahma-b15";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&B15_0>, <&B15_1>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@80030000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x80030000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a15-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+					IRQ_TYPE_LEVEL_HIGH)>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xfffe8000 0x8000>;
+
+		uart0: serial@600 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x600 0x20>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm63178.dtsi b/arch/arm/boot/dts/bcm63178.dtsi
new file mode 100644
index 000000000000..cbd094dde6d0
--- /dev/null
+++ b/arch/arm/boot/dts/bcm63178.dtsi
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm63178", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>,
+			<&CA7_2>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm6756.dtsi b/arch/arm/boot/dts/bcm6756.dtsi
new file mode 100644
index 000000000000..ce1b59faf800
--- /dev/null
+++ b/arch/arm/boot/dts/bcm6756.dtsi
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm6756", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>,
+			<&CA7_2>, <&CA7_3>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm6846.dtsi b/arch/arm/boot/dts/bcm6846.dtsi
new file mode 100644
index 000000000000..8aa47a2583b2
--- /dev/null
+++ b/arch/arm/boot/dts/bcm6846.dtsi
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm6846", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		uart0: serial@640 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x640 0x1b>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm6855.dtsi b/arch/arm/boot/dts/bcm6855.dtsi
new file mode 100644
index 000000000000..620f51aee1a2
--- /dev/null
+++ b/arch/arm/boot/dts/bcm6855.dtsi
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm6855", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>, <&CA7_2>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm6878.dtsi b/arch/arm/boot/dts/bcm6878.dtsi
new file mode 100644
index 000000000000..1e8b5fa96c25
--- /dev/null
+++ b/arch/arm/boot/dts/bcm6878.dtsi
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm6878", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+					IRQ_TYPE_LEVEL_HIGH)>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts
index a76c74b44bba..363009e747b3 100644
--- a/arch/arm/boot/dts/bcm911360_entphn.dts
+++ b/arch/arm/boot/dts/bcm911360_entphn.dts
@@ -47,10 +47,10 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		hook {
+		button-hook {
 			label = "HOOK";
 			linux,code = <KEY_O>;
 			gpios = <&gpio_asiu 48 0>;
diff --git a/arch/arm/boot/dts/bcm947189acdbmr.dts b/arch/arm/boot/dts/bcm947189acdbmr.dts
index b0b8c774a37f..16e70a264faf 100644
--- a/arch/arm/boot/dts/bcm947189acdbmr.dts
+++ b/arch/arm/boot/dts/bcm947189acdbmr.dts
@@ -44,13 +44,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm947622.dts b/arch/arm/boot/dts/bcm947622.dts
new file mode 100644
index 000000000000..6f083724ab8e
--- /dev/null
+++ b/arch/arm/boot/dts/bcm947622.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm47622.dtsi"
+
+/ {
+	model = "Broadcom BCM947622 Reference Board";
+	compatible = "brcm,bcm947622", "brcm,bcm47622", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm953012er.dts b/arch/arm/boot/dts/bcm953012er.dts
index 52feca0fb906..4fe3b3653376 100644
--- a/arch/arm/boot/dts/bcm953012er.dts
+++ b/arch/arm/boot/dts/bcm953012er.dts
@@ -37,7 +37,7 @@
 
 / {
 	model = "NorthStar Enterprise Router (BCM953012ER)";
-	compatible = "brcm,bcm953012er", "brcm,brcm53012", "brcm,bcm4708";
+	compatible = "brcm,bcm953012er", "brcm,bcm53012", "brcm,bcm4708";
 
 	memory@0 {
 		device_type = "memory";
@@ -47,13 +47,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm953012hr.dts b/arch/arm/boot/dts/bcm953012hr.dts
index 9140be7ec053..b070b69466bd 100644
--- a/arch/arm/boot/dts/bcm953012hr.dts
+++ b/arch/arm/boot/dts/bcm953012hr.dts
@@ -37,7 +37,7 @@
 
 / {
 	model = "NorthStar HR (BCM953012HR)";
-	compatible = "brcm,bcm953012hr", "brcm,brcm53012", "brcm,bcm4708";
+	compatible = "brcm,bcm953012hr", "brcm,bcm53012", "brcm,bcm4708";
 
 	aliases {
 		ethernet0 = &gmac0;
diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts
index de40bd59a5fa..f1e6bcaa1edd 100644
--- a/arch/arm/boot/dts/bcm953012k.dts
+++ b/arch/arm/boot/dts/bcm953012k.dts
@@ -36,7 +36,7 @@
 
 / {
 	model = "NorthStar SVK (BCM953012K)";
-	compatible = "brcm,bcm953012k", "brcm,brcm53012", "brcm,bcm4708";
+	compatible = "brcm,bcm953012k", "brcm,bcm53012", "brcm,bcm4708";
 
 	aliases {
 		serial0 = &uart0;
diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts
index 60376b62cd5f..15f023656df0 100644
--- a/arch/arm/boot/dts/bcm958522er.dts
+++ b/arch/arm/boot/dts/bcm958522er.dts
@@ -136,7 +136,7 @@
 &qspi {
 	status = "okay";
 	bspi-sel = <0>;
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p80";
diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts
index 8eeb319f5b54..9b9c225a1fb3 100644
--- a/arch/arm/boot/dts/bcm958525er.dts
+++ b/arch/arm/boot/dts/bcm958525er.dts
@@ -136,7 +136,7 @@
 &qspi {
 	status = "okay";
 	bspi-sel = <0>;
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p80";
diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts
index dc86d5a91292..ca9311452739 100644
--- a/arch/arm/boot/dts/bcm958525xmc.dts
+++ b/arch/arm/boot/dts/bcm958525xmc.dts
@@ -152,7 +152,7 @@
 &qspi {
 	status = "okay";
 	bspi-sel = <0>;
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p80";
diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts
index c457e53d886e..9db3c851451a 100644
--- a/arch/arm/boot/dts/bcm958622hr.dts
+++ b/arch/arm/boot/dts/bcm958622hr.dts
@@ -140,7 +140,7 @@
 &qspi {
 	status = "okay";
 	bspi-sel = <0>;
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p80";
diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts
index c06871915a1c..32786e7c4e12 100644
--- a/arch/arm/boot/dts/bcm958623hr.dts
+++ b/arch/arm/boot/dts/bcm958623hr.dts
@@ -144,7 +144,7 @@
 &qspi {
 	status = "okay";
 	bspi-sel = <0>;
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p80";
diff --git a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
index ba01054a76cf..c54451dde6dd 100644
--- a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
+++ b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
@@ -13,7 +13,7 @@
 		autorepeat;
 		poll-interval = <20>;
 
-		reset {
+		button-reset {
 			label = "reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpioa 8 GPIO_ACTIVE_LOW>;
@@ -57,10 +57,9 @@
 
 		led-4 {
 			/* amber:power */
-			function = LED_FUNCTION_POWER;
+			function = LED_FUNCTION_FAULT;
 			color = <LED_COLOR_ID_AMBER>;
 			gpios = <&gpioa 3 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
 		};
 
 		led-5 {
diff --git a/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi b/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
index 7c487c74fd10..1830844c8404 100644
--- a/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
+++ b/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
@@ -14,7 +14,7 @@
 		autorepeat;
 		poll-interval = <20>;
 
-		reset {
+		button-reset {
 			label = "reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpioa 6 GPIO_ACTIVE_LOW>;
@@ -106,10 +106,9 @@
 
 		led-a {
 			/* amber:power */
-			function = LED_FUNCTION_POWER;
+			function = LED_FUNCTION_FAULT;
 			color = <LED_COLOR_ID_AMBER>;
 			gpios = <&gpioa 0 GPIO_ACTIVE_LOW>;
-			default-state = "on";
 		};
 
 		led-b {
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
index 6519b7c61af1..b0854d881ac6 100644
--- a/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
@@ -22,7 +22,7 @@
 		};
 
 		led-2 {
-			function = LED_FUNCTION_INDICATOR;
+			function = LED_FUNCTION_POWER;
 			color = <LED_COLOR_ID_GREEN>;
 			pwms = <&pwm 2 50000>;
 			max-brightness = <255>;
@@ -39,6 +39,8 @@
 
 &amac2 {
 	status = "okay";
+	nvmem-cells = <&mac_address>;
+	nvmem-cell-names = "mac-address";
 };
 
 &ehci0 {
@@ -53,6 +55,12 @@
 		reg = <0x50>;
 		pagesize = <32>;
 		read-only;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		mac_address: mac-address@66 {
+			reg = <0x66 0x6>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts
index b22fc6624ae4..74263d98de73 100644
--- a/arch/arm/boot/dts/bcm958625hr.dts
+++ b/arch/arm/boot/dts/bcm958625hr.dts
@@ -151,7 +151,7 @@
 &qspi {
 	status = "okay";
 	bspi-sel = <0>;
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p80";
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
index 0183f8965a74..69ebc7a913a7 100644
--- a/arch/arm/boot/dts/bcm958625k.dts
+++ b/arch/arm/boot/dts/bcm958625k.dts
@@ -155,7 +155,7 @@
 &qspi {
 	status = "okay";
 	bspi-sel = <0>;
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p80";
diff --git a/arch/arm/boot/dts/bcm963138.dts b/arch/arm/boot/dts/bcm963138.dts
new file mode 100644
index 000000000000..d28c4f130ca2
--- /dev/null
+++ b/arch/arm/boot/dts/bcm963138.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm63138.dtsi"
+
+/ {
+	model = "Broadcom BCM963138 Reference Board";
+	compatible = "brcm,bcm963138", "brcm,bcm63138", "brcm,bcmbca";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &serial0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm963138dvt.dts b/arch/arm/boot/dts/bcm963138dvt.dts
index df5c8ab90627..15bec75be74c 100644
--- a/arch/arm/boot/dts/bcm963138dvt.dts
+++ b/arch/arm/boot/dts/bcm963138dvt.dts
@@ -8,7 +8,7 @@
 #include "bcm63138.dtsi"
 
 / {
-	compatible = "brcm,BCM963138DVT", "brcm,bcm63138";
+	compatible = "brcm,BCM963138DVT", "brcm,bcm63138", "brcm,bcmbca";
 	model = "Broadcom BCM963138DVT";
 
 	chosen {
diff --git a/arch/arm/boot/dts/bcm963148.dts b/arch/arm/boot/dts/bcm963148.dts
new file mode 100644
index 000000000000..98f6a6d09f50
--- /dev/null
+++ b/arch/arm/boot/dts/bcm963148.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm63148.dtsi"
+
+/ {
+	model = "Broadcom BCM963148 Reference Board";
+	compatible = "brcm,bcm963148", "brcm,bcm63148", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm963178.dts b/arch/arm/boot/dts/bcm963178.dts
new file mode 100644
index 000000000000..fa096e9cde23
--- /dev/null
+++ b/arch/arm/boot/dts/bcm963178.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm63178.dtsi"
+
+/ {
+	model = "Broadcom BCM963178 Reference Board";
+	compatible = "brcm,bcm963178", "brcm,bcm63178", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm96756.dts b/arch/arm/boot/dts/bcm96756.dts
new file mode 100644
index 000000000000..9a4a87ba9c8a
--- /dev/null
+++ b/arch/arm/boot/dts/bcm96756.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6756.dtsi"
+
+/ {
+	model = "Broadcom BCM96756 Reference Board";
+	compatible = "brcm,bcm96756", "brcm,bcm6756", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm96846.dts b/arch/arm/boot/dts/bcm96846.dts
new file mode 100644
index 000000000000..c70ebccabc19
--- /dev/null
+++ b/arch/arm/boot/dts/bcm96846.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6846.dtsi"
+
+/ {
+	model = "Broadcom BCM96846 Reference Board";
+	compatible = "brcm,bcm96846", "brcm,bcm6846", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm96855.dts b/arch/arm/boot/dts/bcm96855.dts
new file mode 100644
index 000000000000..4438152561ac
--- /dev/null
+++ b/arch/arm/boot/dts/bcm96855.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6855.dtsi"
+
+/ {
+	model = "Broadcom BCM96855 Reference Board";
+	compatible = "brcm,bcm96855", "brcm,bcm6855", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm96878.dts b/arch/arm/boot/dts/bcm96878.dts
new file mode 100644
index 000000000000..8fbc175cb452
--- /dev/null
+++ b/arch/arm/boot/dts/bcm96878.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6878.dtsi"
+
+/ {
+	model = "Broadcom BCM96878 Reference Board";
+	compatible = "brcm,bcm96878", "brcm,bcm6878", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts
index 007e34715956..e96bc3f2d5cf 100644
--- a/arch/arm/boot/dts/bcm988312hr.dts
+++ b/arch/arm/boot/dts/bcm988312hr.dts
@@ -140,7 +140,7 @@
 &qspi {
 	status = "okay";
 	bspi-sel = <0>;
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p80";
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index 87c517d65f62..1fdd9a249165 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -52,15 +52,15 @@
 		enable-gpios = <&gpio 40 GPIO_ACTIVE_HIGH>; /* lcd_panel_pwr */
 
 		panel-info {
-			ac-bias		= <255>;
-			ac-bias-intrpt	= <0>;
-			dma-burst-sz	= <16>;
-			bpp		= <16>;
-			fdd		= <0x80>;
-			sync-edge	= <0>;
-			sync-ctrl	= <1>;
-			raster-order	= <0>;
-			fifo-th		= <0>;
+			ac-bias = <255>;
+			ac-bias-intrpt = <0>;
+			dma-burst-sz = <16>;
+			bpp = <16>;
+			fdd = <0x80>;
+			sync-edge = <0>;
+			sync-ctrl = <1>;
+			raster-order = <0>;
+			fifo-th = <0>;
 		};
 
 		display-timings {
@@ -278,7 +278,7 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi1_pins &spi1_cs0_pin>;
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index c3942b4e82ad..e46e4d22db39 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -419,7 +419,7 @@
 		edma0: edma@0 {
 			compatible = "ti,edma3-tpcc";
 			/* eDMA3 CC0: 0x01c0 0000 - 0x01c0 7fff */
-			reg =	<0x0 0x8000>;
+			reg = <0x0 0x8000>;
 			reg-names = "edma3_cc";
 			interrupts = <11 12>;
 			interrupt-names = "edma3_ccint", "edma3_ccerrint";
@@ -430,14 +430,14 @@
 		};
 		edma0_tptc0: tptc@8000 {
 			compatible = "ti,edma3-tptc";
-			reg =	<0x8000 0x400>;
+			reg = <0x8000 0x400>;
 			interrupts = <13>;
 			interrupt-names = "edm3_tcerrint";
 			power-domains = <&psc0 1>;
 		};
 		edma0_tptc1: tptc@8400 {
 			compatible = "ti,edma3-tptc";
-			reg =	<0x8400 0x400>;
+			reg = <0x8400 0x400>;
 			interrupts = <32>;
 			interrupt-names = "edm3_tcerrint";
 			power-domains = <&psc0 2>;
@@ -445,7 +445,7 @@
 		edma1: edma@230000 {
 			compatible = "ti,edma3-tpcc";
 			/* eDMA3 CC1: 0x01e3 0000 - 0x01e3 7fff */
-			reg =	<0x230000 0x8000>;
+			reg = <0x230000 0x8000>;
 			reg-names = "edma3_cc";
 			interrupts = <93 94>;
 			interrupt-names = "edma3_ccint", "edma3_ccerrint";
@@ -456,7 +456,7 @@
 		};
 		edma1_tptc0: tptc@238000 {
 			compatible = "ti,edma3-tptc";
-			reg =	<0x238000 0x400>;
+			reg = <0x238000 0x400>;
 			interrupts = <95>;
 			interrupt-names = "edm3_tcerrint";
 			power-domains = <&psc1 21>;
@@ -672,14 +672,16 @@
 
 			cppi41dma: dma-controller@201000 {
 				compatible = "ti,da830-cppi41";
-				reg =  <0x201000 0x1000
+				reg = <0x201000 0x1000
 					0x202000 0x1000
 					0x204000 0x4000>;
 				reg-names = "controller",
 					    "scheduler", "queuemgr";
 				interrupts = <58>;
 				#dma-cells = <2>;
+				/* For backwards compatibility: */
 				#dma-channels = <4>;
+				dma-channels = <4>;
 				power-domains = <&psc1 1>;
 				status = "okay";
 			};
diff --git a/arch/arm/boot/dts/dm8148-evm.dts b/arch/arm/boot/dts/dm8148-evm.dts
index 8ef48c00f98d..fe3f9a970b18 100644
--- a/arch/arm/boot/dts/dm8148-evm.dts
+++ b/arch/arm/boot/dts/dm8148-evm.dts
@@ -51,7 +51,7 @@
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>; /* termcount */
-		linux,mtd-name= "micron,mt29f2g16aadwp";
+		linux,mtd-name = "micron,mt29f2g16aadwp";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ti,nand-ecc-opt = "bch8";
diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi
index 7702e048e110..8104969c67c1 100644
--- a/arch/arm/boot/dts/dm814x.dtsi
+++ b/arch/arm/boot/dts/dm814x.dtsi
@@ -1,8 +1,4 @@
-/*
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
+// SPDX-License-Identifier: GPL-2.0-only
 
 #include <dt-bindings/bus/ti-sysc.h>
 #include <dt-bindings/clock/dm814.h>
@@ -167,8 +163,11 @@
 				interrupts = <17>;
 				interrupt-names = "glue";
 				#dma-cells = <2>;
+				/* For backwards compatibility: */
 				#dma-channels = <30>;
+				dma-channels = <30>;
 				#dma-requests = <256>;
+				dma-requests = <256>;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts
index 5126e2d72ed7..244a957f9ba3 100644
--- a/arch/arm/boot/dts/dm8168-evm.dts
+++ b/arch/arm/boot/dts/dm8168-evm.dts
@@ -119,7 +119,7 @@
 
 	nand@0,0 {
 		compatible = "ti,omap2-nand";
-		linux,mtd-name= "micron,mt29f2g16aadwp";
+		linux,mtd-name = "micron,mt29f2g16aadwp";
 		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
@@ -177,7 +177,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcspi1_pins>;
 
-	m25p80@0 {
+	flash@0 {
 		compatible = "w25x32";
 		spi-max-frequency = <48000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi
index a9e7274806f4..649b33194455 100644
--- a/arch/arm/boot/dts/dm816x.dtsi
+++ b/arch/arm/boot/dts/dm816x.dtsi
@@ -1,8 +1,4 @@
-/*
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
+// SPDX-License-Identifier: GPL-2.0-only
 
 #include <dt-bindings/bus/ti-sysc.h>
 #include <dt-bindings/clock/dm816.h>
@@ -655,8 +651,11 @@
 				interrupts = <17>;
 				interrupt-names = "glue";
 				#dma-cells = <2>;
+				/* For backwards compatibility: */
 				#dma-channels = <30>;
+				dma-channels = <30>;
 				#dma-requests = <256>;
+				dma-requests = <256>;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
index 3e1584e787ae..2639b9fe0ab4 100644
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -127,7 +127,7 @@
 	status = "okay";
 
 	/* spi0.0: 4M Flash Winbond W25Q32BV */
-	spi-flash@0 {
+	flash@0 {
 		compatible = "st,w25q32";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/dove-d2plug.dts b/arch/arm/boot/dts/dove-d2plug.dts
index 273f12ca2512..a0e8996c2ffd 100644
--- a/arch/arm/boot/dts/dove-d2plug.dts
+++ b/arch/arm/boot/dts/dove-d2plug.dts
@@ -62,7 +62,7 @@
 	status = "okay";
 
 	/* spi0.0: 4M Flash Macronix MX25L3205D */
-	spi-flash@0 {
+	flash@0 {
 		compatible = "st,m25l3205d";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/dove-d3plug.dts b/arch/arm/boot/dts/dove-d3plug.dts
index 826026c28f90..1e81d1b97055 100644
--- a/arch/arm/boot/dts/dove-d3plug.dts
+++ b/arch/arm/boot/dts/dove-d3plug.dts
@@ -79,7 +79,7 @@
 	status = "okay";
 
 	/* spi0.0: 2M Flash Macronix MX25L1605D */
-	spi-flash@0 {
+	flash@0 {
 		compatible = "st,m25l1605d";
 		spi-max-frequency = <86000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/dove-dove-db.dts b/arch/arm/boot/dts/dove-dove-db.dts
index 1754a62e014e..c1912dc6bfc3 100644
--- a/arch/arm/boot/dts/dove-dove-db.dts
+++ b/arch/arm/boot/dts/dove-dove-db.dts
@@ -27,7 +27,7 @@
 	status = "okay";
 
 	/* spi0.0: 4M Flash ST-M25P32-VMF6P */
-	spi-flash@0 {
+	flash@0 {
 		compatible = "st,m25p32";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 89e0bdaf3a85..00a36fba2fd2 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -122,8 +122,18 @@
 				bus-range = <0x00 0xff>;
 
 				#interrupt-cells = <1>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 16>;
+				interrupt-names = "intx", "error";
+				interrupts = <16>, <15>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+						<0 0 0 2 &pcie0_intc 1>,
+						<0 0 0 3 &pcie0_intc 2>,
+						<0 0 0 4 &pcie0_intc 3>;
+
+				pcie0_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie1: pcie@2 {
@@ -141,8 +151,18 @@
 				bus-range = <0x00 0xff>;
 
 				#interrupt-cells = <1>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 18>;
+				interrupt-names = "intx", "error";
+				interrupts = <18>, <17>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 
diff --git a/arch/arm/boot/dts/dra62x-j5eco-evm.dts b/arch/arm/boot/dts/dra62x-j5eco-evm.dts
index c16e183822be..577114c4c20a 100644
--- a/arch/arm/boot/dts/dra62x-j5eco-evm.dts
+++ b/arch/arm/boot/dts/dra62x-j5eco-evm.dts
@@ -51,7 +51,7 @@
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>; /* termcount */
-		linux,mtd-name= "micron,mt29f2g16aadwp";
+		linux,mtd-name = "micron,mt29f2g16aadwp";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ti,nand-ecc-opt = "bch8";
diff --git a/arch/arm/boot/dts/dra62x.dtsi b/arch/arm/boot/dts/dra62x.dtsi
index cc4878aaa8ea..cfefa670515c 100644
--- a/arch/arm/boot/dts/dra62x.dtsi
+++ b/arch/arm/boot/dts/dra62x.dtsi
@@ -1,8 +1,4 @@
-/*
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
+// SPDX-License-Identifier: GPL-2.0-only
 
 #include "dm814x.dtsi"
 
diff --git a/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi b/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi
index e75569383dd8..747ff0db90c7 100644
--- a/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi
+++ b/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for DRA7x SoC DSPEVE thermal
  *
  * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/thermal/thermal.h>
diff --git a/arch/arm/boot/dts/dra7-evm-common.dtsi b/arch/arm/boot/dts/dra7-evm-common.dtsi
index 0f71a9f37a72..68c43eb12c1a 100644
--- a/arch/arm/boot/dts/dra7-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra7-evm-common.dtsi
@@ -135,7 +135,7 @@
 	status = "okay";
 
 	spi-max-frequency = <76800000>;
-	m25p80@0 {
+	flash@0 {
 		compatible = "s25fl256s1";
 		spi-max-frequency = <76800000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/dra7-iva-thermal.dtsi b/arch/arm/boot/dts/dra7-iva-thermal.dtsi
index a7077321613f..0a31313065df 100644
--- a/arch/arm/boot/dts/dra7-iva-thermal.dtsi
+++ b/arch/arm/boot/dts/dra7-iva-thermal.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for DRA7x SoC IVA thermal
  *
  * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/thermal/thermal.h>
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index 956a26d52a4c..5733e3a4ea8e 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -3482,8 +3482,7 @@
 				ti,timer-pwm;
 			};
 		};
-
-		target-module@2c000 {			/* 0x4882c000, ap 17 02.0 */
+		timer15_target: target-module@2c000 {	/* 0x4882c000, ap 17 02.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
 			reg = <0x2c000 0x4>,
 			      <0x2c010 0x4>;
@@ -3511,7 +3510,7 @@
 			};
 		};
 
-		target-module@2e000 {			/* 0x4882e000, ap 19 14.0 */
+		timer16_target: target-module@2e000 {	/* 0x4882e000, ap 19 14.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
 			reg = <0x2e000 0x4>,
 			      <0x2e010 0x4>;
@@ -4189,11 +4188,11 @@
 			reg = <0x1d0010 0x4>;
 			reg-names = "sysc";
 			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
+					<SYSC_IDLE_NO>;
 			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 					<SYSC_IDLE_NO>,
 					<SYSC_IDLE_SMART>;
+			power-domains = <&prm_vpe>;
 			clocks = <&vpe_clkctrl DRA7_VPE_VPE_CLKCTRL 0>;
 			clock-names = "fck";
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 6b485cbed8d5..97ce0c4f1df7 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -160,7 +160,7 @@
 		target-module@48210000 {
 			compatible = "ti,sysc-omap4-simple", "ti,sysc";
 			power-domains = <&prm_mpu>;
-			clocks = <&mpu_clkctrl DRA7_MPU_CLKCTRL 0>;
+			clocks = <&mpu_clkctrl DRA7_MPU_MPU_CLKCTRL 0>;
 			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -875,10 +875,10 @@
 			      <0x58000014 4>;
 			reg-names = "rev", "syss";
 			ti,syss-mask = <1>;
-			clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 0>,
-				 <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 9>,
-				 <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 10>,
-				 <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 11>;
+			clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 0>,
+				 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>,
+				 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 10>,
+				 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 11>;
 			clock-names = "fck", "hdmi_clk", "sys_clk", "tv_clk";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -912,7 +912,7 @@
 							 SYSC_OMAP2_SOFTRESET |
 							 SYSC_OMAP2_AUTOIDLE)>;
 					ti,syss-mask = <1>;
-					clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>;
+					clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>;
 					clock-names = "fck";
 					#address-cells = <1>;
 					#size-cells = <1>;
@@ -939,8 +939,8 @@
 							<SYSC_IDLE_SMART>,
 							<SYSC_IDLE_SMART_WKUP>;
 					ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET)>;
-					clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 9>,
-						 <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>;
+					clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>,
+						 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>;
 					clock-names = "fck", "dss_clk";
 					#address-cells = <1>;
 					#size-cells = <1>;
@@ -979,7 +979,7 @@
 				compatible = "vivante,gc";
 				reg = <0x0 0x700>;
 				interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&dss_clkctrl DRA7_BB2D_CLKCTRL 0>;
+				clocks = <&dss_clkctrl DRA7_DSS_BB2D_CLKCTRL 0>;
 				clock-names = "core";
 			};
 		};
@@ -1333,26 +1333,26 @@
 	ti,no-reset-on-init;
 	ti,no-idle;
 	timer@0 {
-		assigned-clocks = <&wkupaon_clkctrl DRA7_TIMER1_CLKCTRL 24>;
+		assigned-clocks = <&wkupaon_clkctrl DRA7_WKUPAON_TIMER1_CLKCTRL 24>;
 		assigned-clock-parents = <&sys_32k_ck>;
 	};
 };
 
 /* Local timers, see ARM architected timer wrap erratum i940 */
-&timer3_target {
+&timer15_target {
 	ti,no-reset-on-init;
 	ti,no-idle;
 	timer@0 {
-		assigned-clocks = <&l4per_clkctrl DRA7_L4PER_TIMER3_CLKCTRL 24>;
+		assigned-clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 24>;
 		assigned-clock-parents = <&timer_sys_clk_div>;
 	};
 };
 
-&timer4_target {
+&timer16_target {
 	ti,no-reset-on-init;
 	ti,no-idle;
 	timer@0 {
-		assigned-clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 24>;
+		assigned-clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 24>;
 		assigned-clock-parents = <&timer_sys_clk_div>;
 	};
 };
diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi
index f12825268188..8948e10dbeb8 100644
--- a/arch/arm/boot/dts/dra72-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra72-evm-common.dtsi
@@ -474,7 +474,7 @@
 	status = "okay";
 
 	spi-max-frequency = <76800000>;
-	m25p80@0 {
+	flash@0 {
 		compatible = "s25fl256s1";
 		spi-max-frequency = <76800000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi b/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi
index a9dce919d443..34eea3c048bd 100644
--- a/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi
+++ b/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi
@@ -1,16 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * MMC IOdelay values for TI's DRA72x, DRA71x and AM571x SoCs.
  *
  * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 /*
diff --git a/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi b/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi
index e86da7a970b6..b9d040135c5f 100644
--- a/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi
+++ b/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi
@@ -1,16 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * MMC IOdelay values for TI's DRA74x, DRA75x and AM572x SoCs.
  *
  * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 /*
diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
index e2b7fcb061cf..57868ac60d29 100644
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -511,7 +511,7 @@
 
 &qspi {
 	spi-max-frequency = <96000000>;
-	m25p80@0 {
+	flash@0 {
 		spi-max-frequency = <96000000>;
 	};
 };
diff --git a/arch/arm/boot/dts/dra76x.dtsi b/arch/arm/boot/dts/dra76x.dtsi
index bc4ae91cba16..931db7932c11 100644
--- a/arch/arm/boot/dts/dra76x.dtsi
+++ b/arch/arm/boot/dts/dra76x.dtsi
@@ -90,8 +90,8 @@
 		clocks = <&dpll_gmac_x2_ck>;
 		ti,max-div = <63>;
 		reg = <0x03fc>;
-		ti,bit-shift=<20>;
-		ti,latch-bit=<26>;
+		ti,bit-shift = <20>;
+		ti,latch-bit = <26>;
 		assigned-clocks = <&dpll_gmac_h14x2_ctrl_ck>;
 		assigned-clock-rates = <80000000>;
 	};
@@ -102,7 +102,7 @@
 		clocks = <&dpll_gmac_ck>, <&dpll_gmac_h14x2_ctrl_ck>;
 		reg = <0x3fc>;
 		ti,bit-shift = <29>;
-		ti,latch-bit=<26>;
+		ti,latch-bit = <26>;
 		assigned-clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>;
 		assigned-clock-parents = <&dpll_gmac_h14x2_ctrl_ck>;
 	};
diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
index 2365554eef3c..04a7a6d1d529 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -5,210 +5,244 @@
  * Copyright (C) 2013 Texas Instruments, Inc.
  */
 &cm_core_aon_clocks {
-	atl_clkin0_ck: atl_clkin0_ck {
+	atl_clkin0_ck: clock-atl-clkin0 {
 		#clock-cells = <0>;
 		compatible = "ti,dra7-atl-clock";
+		clock-output-names = "atl_clkin0_ck";
 		clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
 	};
 
-	atl_clkin1_ck: atl_clkin1_ck {
+	atl_clkin1_ck: clock-atl-clkin1 {
 		#clock-cells = <0>;
 		compatible = "ti,dra7-atl-clock";
+		clock-output-names = "atl_clkin1_ck";
 		clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
 	};
 
-	atl_clkin2_ck: atl_clkin2_ck {
+	atl_clkin2_ck: clock-atl-clkin2 {
 		#clock-cells = <0>;
 		compatible = "ti,dra7-atl-clock";
+		clock-output-names = "atl_clkin2_ck";
 		clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
 	};
 
-	atl_clkin3_ck: atl_clkin3_ck {
+	atl_clkin3_ck: clock-atl-clkin3 {
 		#clock-cells = <0>;
 		compatible = "ti,dra7-atl-clock";
+		clock-output-names = "atl_clkin3_ck";
 		clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
 	};
 
-	hdmi_clkin_ck: hdmi_clkin_ck {
+	hdmi_clkin_ck: clock-hdmi-clkin {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "hdmi_clkin_ck";
 		clock-frequency = <0>;
 	};
 
-	mlb_clkin_ck: mlb_clkin_ck {
+	mlb_clkin_ck: clock-mlb-clkin {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "mlb_clkin_ck";
 		clock-frequency = <0>;
 	};
 
-	mlbp_clkin_ck: mlbp_clkin_ck {
+	mlbp_clkin_ck: clock-mlbp-clkin {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "mlbp_clkin_ck";
 		clock-frequency = <0>;
 	};
 
-	pciesref_acs_clk_ck: pciesref_acs_clk_ck {
+	pciesref_acs_clk_ck: clock-pciesref-acs {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "pciesref_acs_clk_ck";
 		clock-frequency = <100000000>;
 	};
 
-	ref_clkin0_ck: ref_clkin0_ck {
+	ref_clkin0_ck: clock-ref-clkin0 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "ref_clkin0_ck";
 		clock-frequency = <0>;
 	};
 
-	ref_clkin1_ck: ref_clkin1_ck {
+	ref_clkin1_ck: clock-ref-clkin1 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "ref_clkin1_ck";
 		clock-frequency = <0>;
 	};
 
-	ref_clkin2_ck: ref_clkin2_ck {
+	ref_clkin2_ck: clock-ref-clkin2 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "ref_clkin2_ck";
 		clock-frequency = <0>;
 	};
 
-	ref_clkin3_ck: ref_clkin3_ck {
+	ref_clkin3_ck: clock-ref-clkin3 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "ref_clkin3_ck";
 		clock-frequency = <0>;
 	};
 
-	rmii_clk_ck: rmii_clk_ck {
+	rmii_clk_ck: clock-rmii {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "rmii_clk_ck";
 		clock-frequency = <0>;
 	};
 
-	sdvenc_clkin_ck: sdvenc_clkin_ck {
+	sdvenc_clkin_ck: clock-sdvenc-clkin {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "sdvenc_clkin_ck";
 		clock-frequency = <0>;
 	};
 
-	secure_32k_clk_src_ck: secure_32k_clk_src_ck {
+	secure_32k_clk_src_ck: clock-secure-32k-clk-src {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "secure_32k_clk_src_ck";
 		clock-frequency = <32768>;
 	};
 
-	sys_clk32_crystal_ck: sys_clk32_crystal_ck {
+	sys_clk32_crystal_ck: clock-sys-clk32-crystal {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "sys_clk32_crystal_ck";
 		clock-frequency = <32768>;
 	};
 
-	sys_clk32_pseudo_ck: sys_clk32_pseudo_ck {
+	sys_clk32_pseudo_ck: clock-sys-clk32-pseudo {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "sys_clk32_pseudo_ck";
 		clocks = <&sys_clkin1>;
 		clock-mult = <1>;
 		clock-div = <610>;
 	};
 
-	virt_12000000_ck: virt_12000000_ck {
+	virt_12000000_ck: clock-virt-12000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_12000000_ck";
 		clock-frequency = <12000000>;
 	};
 
-	virt_13000000_ck: virt_13000000_ck {
+	virt_13000000_ck: clock-virt-13000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_13000000_ck";
 		clock-frequency = <13000000>;
 	};
 
-	virt_16800000_ck: virt_16800000_ck {
+	virt_16800000_ck: clock-virt-16800000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_16800000_ck";
 		clock-frequency = <16800000>;
 	};
 
-	virt_19200000_ck: virt_19200000_ck {
+	virt_19200000_ck: clock-virt-19200000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_19200000_ck";
 		clock-frequency = <19200000>;
 	};
 
-	virt_20000000_ck: virt_20000000_ck {
+	virt_20000000_ck: clock-virt-20000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_20000000_ck";
 		clock-frequency = <20000000>;
 	};
 
-	virt_26000000_ck: virt_26000000_ck {
+	virt_26000000_ck: clock-virt-26000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_26000000_ck";
 		clock-frequency = <26000000>;
 	};
 
-	virt_27000000_ck: virt_27000000_ck {
+	virt_27000000_ck: clock-virt-27000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_27000000_ck";
 		clock-frequency = <27000000>;
 	};
 
-	virt_38400000_ck: virt_38400000_ck {
+	virt_38400000_ck: clock-virt-38400000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_38400000_ck";
 		clock-frequency = <38400000>;
 	};
 
-	sys_clkin2: sys_clkin2 {
+	sys_clkin2: clock-sys-clkin2 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "sys_clkin2";
 		clock-frequency = <22579200>;
 	};
 
-	usb_otg_clkin_ck: usb_otg_clkin_ck {
+	usb_otg_clkin_ck: clock-usb-otg-clkin {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "usb_otg_clkin_ck";
 		clock-frequency = <0>;
 	};
 
-	video1_clkin_ck: video1_clkin_ck {
+	video1_clkin_ck: clock-video1-clkin {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "video1_clkin_ck";
 		clock-frequency = <0>;
 	};
 
-	video1_m2_clkin_ck: video1_m2_clkin_ck {
+	video1_m2_clkin_ck: clock-video1-m2-clkin {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "video1_m2_clkin_ck";
 		clock-frequency = <0>;
 	};
 
-	video2_clkin_ck: video2_clkin_ck {
+	video2_clkin_ck: clock-video2-clkin {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "video2_clkin_ck";
 		clock-frequency = <0>;
 	};
 
-	video2_m2_clkin_ck: video2_m2_clkin_ck {
+	video2_m2_clkin_ck: clock-video2-m2-clkin {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "video2_m2_clkin_ck";
 		clock-frequency = <0>;
 	};
 
-	dpll_abe_ck: dpll_abe_ck@1e0 {
+	dpll_abe_ck: clock@1e0 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-m4xen-clock";
+		clock-output-names = "dpll_abe_ck";
 		clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>;
 		reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
 	};
 
-	dpll_abe_x2_ck: dpll_abe_x2_ck {
+	dpll_abe_x2_ck: clock-dpll-abe-x2 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-x2-clock";
+		clock-output-names = "dpll_abe_x2_ck";
 		clocks = <&dpll_abe_ck>;
 	};
 
-	dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 {
+	dpll_abe_m2x2_ck: clock-dpll-abe-m2x2-8@1f0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_abe_m2x2_ck";
 		clocks = <&dpll_abe_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -217,18 +251,20 @@
 		ti,invert-autoidle-bit;
 	};
 
-	abe_clk: abe_clk@108 {
+	abe_clk: clock-abe@108 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "abe_clk";
 		clocks = <&dpll_abe_m2x2_ck>;
 		ti,max-div = <4>;
 		reg = <0x0108>;
 		ti,index-power-of-two;
 	};
 
-	dpll_abe_m2_ck: dpll_abe_m2_ck@1f0 {
+	dpll_abe_m2_ck: clock-dpll-abe-m2-8@1f0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_abe_m2_ck";
 		clocks = <&dpll_abe_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -237,9 +273,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 {
+	dpll_abe_m3x2_ck: clock-dpll-abe-m3x2-8@1f4 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_abe_m3x2_ck";
 		clocks = <&dpll_abe_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -248,30 +285,34 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_core_byp_mux: dpll_core_byp_mux@12c {
+	dpll_core_byp_mux: clock-dpll-core-byp-mux-23@12c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "dpll_core_byp_mux";
 		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
 		ti,bit-shift = <23>;
 		reg = <0x012c>;
 	};
 
-	dpll_core_ck: dpll_core_ck@120 {
+	dpll_core_ck: clock@120 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-core-clock";
+		clock-output-names = "dpll_core_ck";
 		clocks = <&sys_clkin1>, <&dpll_core_byp_mux>;
 		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
 	};
 
-	dpll_core_x2_ck: dpll_core_x2_ck {
+	dpll_core_x2_ck: clock-dpll-core-x2 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-x2-clock";
+		clock-output-names = "dpll_core_x2_ck";
 		clocks = <&dpll_core_ck>;
 	};
 
-	dpll_core_h12x2_ck: dpll_core_h12x2_ck@13c {
+	dpll_core_h12x2_ck: clock-dpll-core-h12x2-8@13c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_h12x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <63>;
 		ti,autoidle-shift = <8>;
@@ -280,24 +321,27 @@
 		ti,invert-autoidle-bit;
 	};
 
-	mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div {
+	mpu_dpll_hs_clk_div: clock-mpu-dpll-hs-clk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "mpu_dpll_hs_clk_div";
 		clocks = <&dpll_core_h12x2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dpll_mpu_ck: dpll_mpu_ck@160 {
+	dpll_mpu_ck: clock@160 {
 		#clock-cells = <0>;
 		compatible = "ti,omap5-mpu-dpll-clock";
+		clock-output-names = "dpll_mpu_ck";
 		clocks = <&sys_clkin1>, <&mpu_dpll_hs_clk_div>;
 		reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
 	};
 
-	dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 {
+	dpll_mpu_m2_ck: clock-dpll-mpu-m2-8@170 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_mpu_m2_ck";
 		clocks = <&dpll_mpu_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -306,42 +350,47 @@
 		ti,invert-autoidle-bit;
 	};
 
-	mpu_dclk_div: mpu_dclk_div {
+	mpu_dclk_div: clock-mpu-dclk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "mpu_dclk_div";
 		clocks = <&dpll_mpu_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dsp_dpll_hs_clk_div: dsp_dpll_hs_clk_div {
+	dsp_dpll_hs_clk_div: clock-dsp-dpll-hs-clk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dsp_dpll_hs_clk_div";
 		clocks = <&dpll_core_h12x2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dpll_dsp_byp_mux: dpll_dsp_byp_mux@240 {
+	dpll_dsp_byp_mux: clock-dpll-dsp-byp-mux-23@240 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "dpll_dsp_byp_mux";
 		clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>;
 		ti,bit-shift = <23>;
 		reg = <0x0240>;
 	};
 
-	dpll_dsp_ck: dpll_dsp_ck@234 {
+	dpll_dsp_ck: clock@234 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
+		clock-output-names = "dpll_dsp_ck";
 		clocks = <&sys_clkin1>, <&dpll_dsp_byp_mux>;
 		reg = <0x0234>, <0x0238>, <0x0240>, <0x023c>;
 		assigned-clocks = <&dpll_dsp_ck>;
 		assigned-clock-rates = <600000000>;
 	};
 
-	dpll_dsp_m2_ck: dpll_dsp_m2_ck@244 {
+	dpll_dsp_m2_ck: clock-dpll-dsp-m2-8@244 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_dsp_m2_ck";
 		clocks = <&dpll_dsp_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -352,34 +401,38 @@
 		assigned-clock-rates = <600000000>;
 	};
 
-	iva_dpll_hs_clk_div: iva_dpll_hs_clk_div {
+	iva_dpll_hs_clk_div: clock-iva-dpll-hs-clk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "iva_dpll_hs_clk_div";
 		clocks = <&dpll_core_h12x2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dpll_iva_byp_mux: dpll_iva_byp_mux@1ac {
+	dpll_iva_byp_mux: clock-dpll-iva-byp-mux-23@1ac {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "dpll_iva_byp_mux";
 		clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>;
 		ti,bit-shift = <23>;
 		reg = <0x01ac>;
 	};
 
-	dpll_iva_ck: dpll_iva_ck@1a0 {
+	dpll_iva_ck: clock@1a0 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
+		clock-output-names = "dpll_iva_ck";
 		clocks = <&sys_clkin1>, <&dpll_iva_byp_mux>;
 		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
 		assigned-clocks = <&dpll_iva_ck>;
 		assigned-clock-rates = <1165000000>;
 	};
 
-	dpll_iva_m2_ck: dpll_iva_m2_ck@1b0 {
+	dpll_iva_m2_ck: clock-dpll-iva-m2-8@1b0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_iva_m2_ck";
 		clocks = <&dpll_iva_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -390,34 +443,38 @@
 		assigned-clock-rates = <388333334>;
 	};
 
-	iva_dclk: iva_dclk {
+	iva_dclk: clock-iva-dclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "iva_dclk";
 		clocks = <&dpll_iva_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dpll_gpu_byp_mux: dpll_gpu_byp_mux@2e4 {
+	dpll_gpu_byp_mux: clock-dpll-gpu-byp-mux-23@2e4 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "dpll_gpu_byp_mux";
 		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
 		ti,bit-shift = <23>;
 		reg = <0x02e4>;
 	};
 
-	dpll_gpu_ck: dpll_gpu_ck@2d8 {
+	dpll_gpu_ck: clock@2d8 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
+		clock-output-names = "dpll_gpu_ck";
 		clocks = <&sys_clkin1>, <&dpll_gpu_byp_mux>;
 		reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>;
 		assigned-clocks = <&dpll_gpu_ck>;
 		assigned-clock-rates = <1277000000>;
 	};
 
-	dpll_gpu_m2_ck: dpll_gpu_m2_ck@2e8 {
+	dpll_gpu_m2_ck: clock-dpll-gpu-m2-8@2e8 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_gpu_m2_ck";
 		clocks = <&dpll_gpu_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -428,9 +485,10 @@
 		assigned-clock-rates = <425666667>;
 	};
 
-	dpll_core_m2_ck: dpll_core_m2_ck@130 {
+	dpll_core_m2_ck: clock-dpll-core-m2-8@130 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_m2_ck";
 		clocks = <&dpll_core_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -439,32 +497,36 @@
 		ti,invert-autoidle-bit;
 	};
 
-	core_dpll_out_dclk_div: core_dpll_out_dclk_div {
+	core_dpll_out_dclk_div: clock-core-dpll-out-dclk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "core_dpll_out_dclk_div";
 		clocks = <&dpll_core_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dpll_ddr_byp_mux: dpll_ddr_byp_mux@21c {
+	dpll_ddr_byp_mux: clock-dpll-ddr-byp-mux-23@21c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "dpll_ddr_byp_mux";
 		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
 		ti,bit-shift = <23>;
 		reg = <0x021c>;
 	};
 
-	dpll_ddr_ck: dpll_ddr_ck@210 {
+	dpll_ddr_ck: clock@210 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
+		clock-output-names = "dpll_ddr_ck";
 		clocks = <&sys_clkin1>, <&dpll_ddr_byp_mux>;
 		reg = <0x0210>, <0x0214>, <0x021c>, <0x0218>;
 	};
 
-	dpll_ddr_m2_ck: dpll_ddr_m2_ck@220 {
+	dpll_ddr_m2_ck: clock-dpll-ddr-m2-8@220 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_ddr_m2_ck";
 		clocks = <&dpll_ddr_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -473,24 +535,27 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_gmac_byp_mux: dpll_gmac_byp_mux@2b4 {
+	dpll_gmac_byp_mux: clock-dpll-gmac-byp-mux-23@2b4 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "dpll_gmac_byp_mux";
 		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
 		ti,bit-shift = <23>;
 		reg = <0x02b4>;
 	};
 
-	dpll_gmac_ck: dpll_gmac_ck@2a8 {
+	dpll_gmac_ck: clock@2a8 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
+		clock-output-names = "dpll_gmac_ck";
 		clocks = <&sys_clkin1>, <&dpll_gmac_byp_mux>;
 		reg = <0x02a8>, <0x02ac>, <0x02b4>, <0x02b0>;
 	};
 
-	dpll_gmac_m2_ck: dpll_gmac_m2_ck@2b8 {
+	dpll_gmac_m2_ck: clock-dpll-gmac-m2-8@2b8 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_gmac_m2_ck";
 		clocks = <&dpll_gmac_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -499,72 +564,81 @@
 		ti,invert-autoidle-bit;
 	};
 
-	video2_dclk_div: video2_dclk_div {
+	video2_dclk_div: clock-video2-dclk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "video2_dclk_div";
 		clocks = <&video2_m2_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	video1_dclk_div: video1_dclk_div {
+	video1_dclk_div: clock-video1-dclk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "video1_dclk_div";
 		clocks = <&video1_m2_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	hdmi_dclk_div: hdmi_dclk_div {
+	hdmi_dclk_div: clock-hdmi-dclk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "hdmi_dclk_div";
 		clocks = <&hdmi_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	per_dpll_hs_clk_div: per_dpll_hs_clk_div {
+	per_dpll_hs_clk_div: clock-per-dpll-hs-clk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "per_dpll_hs_clk_div";
 		clocks = <&dpll_abe_m3x2_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	usb_dpll_hs_clk_div: usb_dpll_hs_clk_div {
+	usb_dpll_hs_clk_div: clock-usb-dpll-hs-clk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "usb_dpll_hs_clk_div";
 		clocks = <&dpll_abe_m3x2_ck>;
 		clock-mult = <1>;
 		clock-div = <3>;
 	};
 
-	eve_dpll_hs_clk_div: eve_dpll_hs_clk_div {
+	eve_dpll_hs_clk_div: clock-eve-dpll-hs-clk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "eve_dpll_hs_clk_div";
 		clocks = <&dpll_core_h12x2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dpll_eve_byp_mux: dpll_eve_byp_mux@290 {
+	dpll_eve_byp_mux: clock-dpll-eve-byp-mux-23@290 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "dpll_eve_byp_mux";
 		clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>;
 		ti,bit-shift = <23>;
 		reg = <0x0290>;
 	};
 
-	dpll_eve_ck: dpll_eve_ck@284 {
+	dpll_eve_ck: clock@284 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
+		clock-output-names = "dpll_eve_ck";
 		clocks = <&sys_clkin1>, <&dpll_eve_byp_mux>;
 		reg = <0x0284>, <0x0288>, <0x0290>, <0x028c>;
 	};
 
-	dpll_eve_m2_ck: dpll_eve_m2_ck@294 {
+	dpll_eve_m2_ck: clock-dpll-eve-m2-8@294 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_eve_m2_ck";
 		clocks = <&dpll_eve_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -573,17 +647,19 @@
 		ti,invert-autoidle-bit;
 	};
 
-	eve_dclk_div: eve_dclk_div {
+	eve_dclk_div: clock-eve-dclk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "eve_dclk_div";
 		clocks = <&dpll_eve_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dpll_core_h13x2_ck: dpll_core_h13x2_ck@140 {
+	dpll_core_h13x2_ck: clock-dpll-core-h13x2-8@140 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_h13x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <63>;
 		ti,autoidle-shift = <8>;
@@ -592,9 +668,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_core_h14x2_ck: dpll_core_h14x2_ck@144 {
+	dpll_core_h14x2_ck: clock-dpll-core-h14x2-8@144 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_h14x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <63>;
 		ti,autoidle-shift = <8>;
@@ -603,9 +680,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_core_h22x2_ck: dpll_core_h22x2_ck@154 {
+	dpll_core_h22x2_ck: clock-dpll-core-h22x2-8@154 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_h22x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <63>;
 		ti,autoidle-shift = <8>;
@@ -614,9 +692,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_core_h23x2_ck: dpll_core_h23x2_ck@158 {
+	dpll_core_h23x2_ck: clock-dpll-core-h23x2-8@158 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_h23x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <63>;
 		ti,autoidle-shift = <8>;
@@ -625,9 +704,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_core_h24x2_ck: dpll_core_h24x2_ck@15c {
+	dpll_core_h24x2_ck: clock-dpll-core-h24x2-8@15c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_h24x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <63>;
 		ti,autoidle-shift = <8>;
@@ -636,15 +716,17 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_ddr_x2_ck: dpll_ddr_x2_ck {
+	dpll_ddr_x2_ck: clock-dpll-ddr-x2 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-x2-clock";
+		clock-output-names = "dpll_ddr_x2_ck";
 		clocks = <&dpll_ddr_ck>;
 	};
 
-	dpll_ddr_h11x2_ck: dpll_ddr_h11x2_ck@228 {
+	dpll_ddr_h11x2_ck: clock-dpll-ddr-h11x2-8@228 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_ddr_h11x2_ck";
 		clocks = <&dpll_ddr_x2_ck>;
 		ti,max-div = <63>;
 		ti,autoidle-shift = <8>;
@@ -653,15 +735,17 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_dsp_x2_ck: dpll_dsp_x2_ck {
+	dpll_dsp_x2_ck: clock-dpll-dsp-x2 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-x2-clock";
+		clock-output-names = "dpll_dsp_x2_ck";
 		clocks = <&dpll_dsp_ck>;
 	};
 
-	dpll_dsp_m3x2_ck: dpll_dsp_m3x2_ck@248 {
+	dpll_dsp_m3x2_ck: clock-dpll-dsp-m3x2-8@248 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_dsp_m3x2_ck";
 		clocks = <&dpll_dsp_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -672,15 +756,17 @@
 		assigned-clock-rates = <400000000>;
 	};
 
-	dpll_gmac_x2_ck: dpll_gmac_x2_ck {
+	dpll_gmac_x2_ck: clock-dpll-gmac-x2 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-x2-clock";
+		clock-output-names = "dpll_gmac_x2_ck";
 		clocks = <&dpll_gmac_ck>;
 	};
 
-	dpll_gmac_h11x2_ck: dpll_gmac_h11x2_ck@2c0 {
+	dpll_gmac_h11x2_ck: clock-dpll-gmac-h11x2-8@2c0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_gmac_h11x2_ck";
 		clocks = <&dpll_gmac_x2_ck>;
 		ti,max-div = <63>;
 		ti,autoidle-shift = <8>;
@@ -689,9 +775,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_gmac_h12x2_ck: dpll_gmac_h12x2_ck@2c4 {
+	dpll_gmac_h12x2_ck: clock-dpll-gmac-h12x2-8@2c4 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_gmac_h12x2_ck";
 		clocks = <&dpll_gmac_x2_ck>;
 		ti,max-div = <63>;
 		ti,autoidle-shift = <8>;
@@ -700,9 +787,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_gmac_h13x2_ck: dpll_gmac_h13x2_ck@2c8 {
+	dpll_gmac_h13x2_ck: clock-dpll-gmac-h13x2-8@2c8 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_gmac_h13x2_ck";
 		clocks = <&dpll_gmac_x2_ck>;
 		ti,max-div = <63>;
 		ti,autoidle-shift = <8>;
@@ -711,9 +799,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_gmac_m3x2_ck: dpll_gmac_m3x2_ck@2bc {
+	dpll_gmac_m3x2_ck: clock-dpll-gmac-m3x2-8@2bc {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_gmac_m3x2_ck";
 		clocks = <&dpll_gmac_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -722,33 +811,37 @@
 		ti,invert-autoidle-bit;
 	};
 
-	gmii_m_clk_div: gmii_m_clk_div {
+	gmii_m_clk_div: clock-gmii-m-clk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "gmii_m_clk_div";
 		clocks = <&dpll_gmac_h11x2_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	hdmi_clk2_div: hdmi_clk2_div {
+	hdmi_clk2_div: clock-hdmi-clk2-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "hdmi_clk2_div";
 		clocks = <&hdmi_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	hdmi_div_clk: hdmi_div_clk {
+	hdmi_div_clk: clock-hdmi-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "hdmi_div_clk";
 		clocks = <&hdmi_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	l3_iclk_div: l3_iclk_div@100 {
+	l3_iclk_div: clock-l3-iclk-div-4@100 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "l3_iclk_div";
 		ti,max-div = <2>;
 		ti,bit-shift = <4>;
 		reg = <0x0100>;
@@ -756,374 +849,420 @@
 		ti,index-power-of-two;
 	};
 
-	l4_root_clk_div: l4_root_clk_div {
+	l4_root_clk_div: clock-l4-root-clk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "l4_root_clk_div";
 		clocks = <&l3_iclk_div>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	video1_clk2_div: video1_clk2_div {
+	video1_clk2_div: clock-video1-clk2-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "video1_clk2_div";
 		clocks = <&video1_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	video1_div_clk: video1_div_clk {
+	video1_div_clk: clock-video1-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "video1_div_clk";
 		clocks = <&video1_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	video2_clk2_div: video2_clk2_div {
+	video2_clk2_div: clock-video2-clk2-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "video2_clk2_div";
 		clocks = <&video2_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	video2_div_clk: video2_div_clk {
+	video2_div_clk: clock-video2-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "video2_div_clk";
 		clocks = <&video2_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dummy_ck: dummy_ck {
+	dummy_ck: clock-dummy {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "dummy_ck";
 		clock-frequency = <0>;
 	};
 };
 &prm_clocks {
-	sys_clkin1: sys_clkin1@110 {
+	sys_clkin1: clock-sys-clkin1@110 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "sys_clkin1";
 		clocks = <&virt_12000000_ck>, <&virt_20000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
 		reg = <0x0110>;
 		ti,index-starts-at-one;
 	};
 
-	abe_dpll_sys_clk_mux: abe_dpll_sys_clk_mux@118 {
+	abe_dpll_sys_clk_mux: clock-abe-dpll-sys-clk-mux@118 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "abe_dpll_sys_clk_mux";
 		clocks = <&sys_clkin1>, <&sys_clkin2>;
 		reg = <0x0118>;
 	};
 
-	abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux@114 {
+	abe_dpll_bypass_clk_mux: clock-abe-dpll-bypass-clk-mux@114 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "abe_dpll_bypass_clk_mux";
 		clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>;
 		reg = <0x0114>;
 	};
 
-	abe_dpll_clk_mux: abe_dpll_clk_mux@10c {
+	abe_dpll_clk_mux: clock-abe-dpll-clk-mux@10c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "abe_dpll_clk_mux";
 		clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>;
 		reg = <0x010c>;
 	};
 
-	abe_24m_fclk: abe_24m_fclk@11c {
+	abe_24m_fclk: clock-abe-24m@11c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "abe_24m_fclk";
 		clocks = <&dpll_abe_m2x2_ck>;
 		reg = <0x011c>;
 		ti,dividers = <8>, <16>;
 	};
 
-	aess_fclk: aess_fclk@178 {
+	aess_fclk: clock-aess@178 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "aess_fclk";
 		clocks = <&abe_clk>;
 		reg = <0x0178>;
 		ti,max-div = <2>;
 	};
 
-	abe_giclk_div: abe_giclk_div@174 {
+	abe_giclk_div: clock-abe-giclk-div@174 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "abe_giclk_div";
 		clocks = <&aess_fclk>;
 		reg = <0x0174>;
 		ti,max-div = <2>;
 	};
 
-	abe_lp_clk_div: abe_lp_clk_div@1d8 {
+	abe_lp_clk_div: clock-abe-lp-clk-div@1d8 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "abe_lp_clk_div";
 		clocks = <&dpll_abe_m2x2_ck>;
 		reg = <0x01d8>;
 		ti,dividers = <16>, <32>;
 	};
 
-	abe_sys_clk_div: abe_sys_clk_div@120 {
+	abe_sys_clk_div: clock-abe-sys-clk-div@120 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "abe_sys_clk_div";
 		clocks = <&sys_clkin1>;
 		reg = <0x0120>;
 		ti,max-div = <2>;
 	};
 
-	adc_gfclk_mux: adc_gfclk_mux@1dc {
+	adc_gfclk_mux: clock-adc-gfclk-mux@1dc {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "adc_gfclk_mux";
 		clocks = <&sys_clkin1>, <&sys_clkin2>, <&sys_32k_ck>;
 		reg = <0x01dc>;
 	};
 
-	sys_clk1_dclk_div: sys_clk1_dclk_div@1c8 {
+	sys_clk1_dclk_div: clock-sys-clk1-dclk-div@1c8 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "sys_clk1_dclk_div";
 		clocks = <&sys_clkin1>;
 		ti,max-div = <64>;
 		reg = <0x01c8>;
 		ti,index-power-of-two;
 	};
 
-	sys_clk2_dclk_div: sys_clk2_dclk_div@1cc {
+	sys_clk2_dclk_div: clock-sys-clk2-dclk-div@1cc {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "sys_clk2_dclk_div";
 		clocks = <&sys_clkin2>;
 		ti,max-div = <64>;
 		reg = <0x01cc>;
 		ti,index-power-of-two;
 	};
 
-	per_abe_x1_dclk_div: per_abe_x1_dclk_div@1bc {
+	per_abe_x1_dclk_div: clock-per-abe-x1-dclk-div@1bc {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "per_abe_x1_dclk_div";
 		clocks = <&dpll_abe_m2_ck>;
 		ti,max-div = <64>;
 		reg = <0x01bc>;
 		ti,index-power-of-two;
 	};
 
-	dsp_gclk_div: dsp_gclk_div@18c {
+	dsp_gclk_div: clock-dsp-gclk-div@18c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dsp_gclk_div";
 		clocks = <&dpll_dsp_m2_ck>;
 		ti,max-div = <64>;
 		reg = <0x018c>;
 		ti,index-power-of-two;
 	};
 
-	gpu_dclk: gpu_dclk@1a0 {
+	gpu_dclk: clock-gpu-dclk@1a0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "gpu_dclk";
 		clocks = <&dpll_gpu_m2_ck>;
 		ti,max-div = <64>;
 		reg = <0x01a0>;
 		ti,index-power-of-two;
 	};
 
-	emif_phy_dclk_div: emif_phy_dclk_div@190 {
+	emif_phy_dclk_div: clock-emif-phy-dclk-div@190 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "emif_phy_dclk_div";
 		clocks = <&dpll_ddr_m2_ck>;
 		ti,max-div = <64>;
 		reg = <0x0190>;
 		ti,index-power-of-two;
 	};
 
-	gmac_250m_dclk_div: gmac_250m_dclk_div@19c {
+	gmac_250m_dclk_div: clock-gmac-250m-dclk-div@19c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "gmac_250m_dclk_div";
 		clocks = <&dpll_gmac_m2_ck>;
 		ti,max-div = <64>;
 		reg = <0x019c>;
 		ti,index-power-of-two;
 	};
 
-	gmac_main_clk: gmac_main_clk {
+	gmac_main_clk: clock-gmac-main {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "gmac_main_clk";
 		clocks = <&gmac_250m_dclk_div>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	l3init_480m_dclk_div: l3init_480m_dclk_div@1ac {
+	l3init_480m_dclk_div: clock-l3init-480m-dclk-div@1ac {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "l3init_480m_dclk_div";
 		clocks = <&dpll_usb_m2_ck>;
 		ti,max-div = <64>;
 		reg = <0x01ac>;
 		ti,index-power-of-two;
 	};
 
-	usb_otg_dclk_div: usb_otg_dclk_div@184 {
+	usb_otg_dclk_div: clock-usb-otg-dclk-div@184 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "usb_otg_dclk_div";
 		clocks = <&usb_otg_clkin_ck>;
 		ti,max-div = <64>;
 		reg = <0x0184>;
 		ti,index-power-of-two;
 	};
 
-	sata_dclk_div: sata_dclk_div@1c0 {
+	sata_dclk_div: clock-sata-dclk-div@1c0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "sata_dclk_div";
 		clocks = <&sys_clkin1>;
 		ti,max-div = <64>;
 		reg = <0x01c0>;
 		ti,index-power-of-two;
 	};
 
-	pcie2_dclk_div: pcie2_dclk_div@1b8 {
+	pcie2_dclk_div: clock-pcie2-dclk-div@1b8 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "pcie2_dclk_div";
 		clocks = <&dpll_pcie_ref_m2_ck>;
 		ti,max-div = <64>;
 		reg = <0x01b8>;
 		ti,index-power-of-two;
 	};
 
-	pcie_dclk_div: pcie_dclk_div@1b4 {
+	pcie_dclk_div: clock-pcie-dclk-div@1b4 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "pcie_dclk_div";
 		clocks = <&apll_pcie_m2_ck>;
 		ti,max-div = <64>;
 		reg = <0x01b4>;
 		ti,index-power-of-two;
 	};
 
-	emu_dclk_div: emu_dclk_div@194 {
+	emu_dclk_div: clock-emu-dclk-div@194 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "emu_dclk_div";
 		clocks = <&sys_clkin1>;
 		ti,max-div = <64>;
 		reg = <0x0194>;
 		ti,index-power-of-two;
 	};
 
-	secure_32k_dclk_div: secure_32k_dclk_div@1c4 {
+	secure_32k_dclk_div: clock-secure-32k-dclk-div@1c4 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "secure_32k_dclk_div";
 		clocks = <&secure_32k_clk_src_ck>;
 		ti,max-div = <64>;
 		reg = <0x01c4>;
 		ti,index-power-of-two;
 	};
 
-	clkoutmux0_clk_mux: clkoutmux0_clk_mux@158 {
+	clkoutmux0_clk_mux: clock-clkoutmux0-clk-mux@158 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "clkoutmux0_clk_mux";
 		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
 		reg = <0x0158>;
 	};
 
-	clkoutmux1_clk_mux: clkoutmux1_clk_mux@15c {
+	clkoutmux1_clk_mux: clock-clkoutmux1-clk-mux@15c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "clkoutmux1_clk_mux";
 		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
 		reg = <0x015c>;
 	};
 
-	clkoutmux2_clk_mux: clkoutmux2_clk_mux@160 {
+	clkoutmux2_clk_mux: clock-clkoutmux2-clk-mux@160 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "clkoutmux2_clk_mux";
 		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
 		reg = <0x0160>;
 	};
 
-	custefuse_sys_gfclk_div: custefuse_sys_gfclk_div {
+	custefuse_sys_gfclk_div: clock-custefuse-sys-gfclk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "custefuse_sys_gfclk_div";
 		clocks = <&sys_clkin1>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	eve_clk: eve_clk@180 {
+	eve_clk: clock-eve@180 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "eve_clk";
 		clocks = <&dpll_eve_m2_ck>, <&dpll_dsp_m3x2_ck>;
 		reg = <0x0180>;
 	};
 
-	hdmi_dpll_clk_mux: hdmi_dpll_clk_mux@164 {
+	hdmi_dpll_clk_mux: clock-hdmi-dpll-clk-mux@164 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "hdmi_dpll_clk_mux";
 		clocks = <&sys_clkin1>, <&sys_clkin2>;
 		reg = <0x0164>;
 	};
 
-	mlb_clk: mlb_clk@134 {
+	mlb_clk: clock-mlb@134 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "mlb_clk";
 		clocks = <&mlb_clkin_ck>;
 		ti,max-div = <64>;
 		reg = <0x0134>;
 		ti,index-power-of-two;
 	};
 
-	mlbp_clk: mlbp_clk@130 {
+	mlbp_clk: clock-mlbp@130 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "mlbp_clk";
 		clocks = <&mlbp_clkin_ck>;
 		ti,max-div = <64>;
 		reg = <0x0130>;
 		ti,index-power-of-two;
 	};
 
-	per_abe_x1_gfclk2_div: per_abe_x1_gfclk2_div@138 {
+	per_abe_x1_gfclk2_div: clock-per-abe-x1-gfclk2-div@138 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "per_abe_x1_gfclk2_div";
 		clocks = <&dpll_abe_m2_ck>;
 		ti,max-div = <64>;
 		reg = <0x0138>;
 		ti,index-power-of-two;
 	};
 
-	timer_sys_clk_div: timer_sys_clk_div@144 {
+	timer_sys_clk_div: clock-timer-sys-clk-div@144 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "timer_sys_clk_div";
 		clocks = <&sys_clkin1>;
 		reg = <0x0144>;
 		ti,max-div = <2>;
 	};
 
-	video1_dpll_clk_mux: video1_dpll_clk_mux@168 {
+	video1_dpll_clk_mux: clock-video1-dpll-clk-mux@168 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "video1_dpll_clk_mux";
 		clocks = <&sys_clkin1>, <&sys_clkin2>;
 		reg = <0x0168>;
 	};
 
-	video2_dpll_clk_mux: video2_dpll_clk_mux@16c {
+	video2_dpll_clk_mux: clock-video2-dpll-clk-mux@16c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "video2_dpll_clk_mux";
 		clocks = <&sys_clkin1>, <&sys_clkin2>;
 		reg = <0x016c>;
 	};
 
-	wkupaon_iclk_mux: wkupaon_iclk_mux@108 {
+	wkupaon_iclk_mux: clock-wkupaon-iclk-mux@108 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "wkupaon_iclk_mux";
 		clocks = <&sys_clkin1>, <&abe_lp_clk_div>;
 		reg = <0x0108>;
 	};
 };
 
 &cm_core_clocks {
-	dpll_pcie_ref_ck: dpll_pcie_ref_ck@200 {
+	dpll_pcie_ref_ck: clock@200 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
+		clock-output-names = "dpll_pcie_ref_ck";
 		clocks = <&sys_clkin1>, <&sys_clkin1>;
 		reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>;
 	};
 
-	dpll_pcie_ref_m2ldo_ck: dpll_pcie_ref_m2ldo_ck@210 {
+	dpll_pcie_ref_m2ldo_ck: clock-dpll-pcie-ref-m2ldo-8@210 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_pcie_ref_m2ldo_ck";
 		clocks = <&dpll_pcie_ref_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -1132,23 +1271,26 @@
 		ti,invert-autoidle-bit;
 	};
 
-	apll_pcie_in_clk_mux: apll_pcie_in_clk_mux@4ae06118 {
+	apll_pcie_in_clk_mux: clock-apll-pcie-in-clk-mux-7@4ae06118 {
 		compatible = "ti,mux-clock";
+		clock-output-names = "apll_pcie_in_clk_mux";
 		clocks = <&dpll_pcie_ref_m2ldo_ck>, <&pciesref_acs_clk_ck>;
 		#clock-cells = <0>;
 		reg = <0x021c 0x4>;
 		ti,bit-shift = <7>;
 	};
 
-	apll_pcie_ck: apll_pcie_ck@21c {
+	apll_pcie_ck: clock@21c {
 		#clock-cells = <0>;
 		compatible = "ti,dra7-apll-clock";
+		clock-output-names = "apll_pcie_ck";
 		clocks = <&apll_pcie_in_clk_mux>, <&dpll_pcie_ref_ck>;
 		reg = <0x021c>, <0x0220>;
 	};
 
-	optfclk_pciephy_div: optfclk_pciephy_div@4a00821c {
+	optfclk_pciephy_div: clock-optfclk-pciephy-div-8@4a00821c {
 		compatible = "ti,divider-clock";
+		clock-output-names = "optfclk_pciephy_div";
 		clocks = <&apll_pcie_ck>;
 		#clock-cells = <0>;
 		reg = <0x021c>;
@@ -1157,48 +1299,54 @@
 		ti,max-div = <2>;
 	};
 
-	apll_pcie_clkvcoldo: apll_pcie_clkvcoldo {
+	apll_pcie_clkvcoldo: clock-apll-pcie-clkvcoldo {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "apll_pcie_clkvcoldo";
 		clocks = <&apll_pcie_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	apll_pcie_clkvcoldo_div: apll_pcie_clkvcoldo_div {
+	apll_pcie_clkvcoldo_div: clock-apll-pcie-clkvcoldo-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "apll_pcie_clkvcoldo_div";
 		clocks = <&apll_pcie_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	apll_pcie_m2_ck: apll_pcie_m2_ck {
+	apll_pcie_m2_ck: clock-apll-pcie-m2 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "apll_pcie_m2_ck";
 		clocks = <&apll_pcie_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dpll_per_byp_mux: dpll_per_byp_mux@14c {
+	dpll_per_byp_mux: clock-dpll-per-byp-mux-23@14c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "dpll_per_byp_mux";
 		clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>;
 		ti,bit-shift = <23>;
 		reg = <0x014c>;
 	};
 
-	dpll_per_ck: dpll_per_ck@140 {
+	dpll_per_ck: clock@140 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
+		clock-output-names = "dpll_per_ck";
 		clocks = <&sys_clkin1>, <&dpll_per_byp_mux>;
 		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
 	};
 
-	dpll_per_m2_ck: dpll_per_m2_ck@150 {
+	dpll_per_m2_ck: clock-dpll-per-m2-8@150 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_m2_ck";
 		clocks = <&dpll_per_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -1207,32 +1355,36 @@
 		ti,invert-autoidle-bit;
 	};
 
-	func_96m_aon_dclk_div: func_96m_aon_dclk_div {
+	func_96m_aon_dclk_div: clock-func-96m-aon-dclk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "func_96m_aon_dclk_div";
 		clocks = <&dpll_per_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dpll_usb_byp_mux: dpll_usb_byp_mux@18c {
+	dpll_usb_byp_mux: clock-dpll-usb-byp-mux-23@18c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "dpll_usb_byp_mux";
 		clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>;
 		ti,bit-shift = <23>;
 		reg = <0x018c>;
 	};
 
-	dpll_usb_ck: dpll_usb_ck@180 {
+	dpll_usb_ck: clock@180 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-j-type-clock";
+		clock-output-names = "dpll_usb_ck";
 		clocks = <&sys_clkin1>, <&dpll_usb_byp_mux>;
 		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
 	};
 
-	dpll_usb_m2_ck: dpll_usb_m2_ck@190 {
+	dpll_usb_m2_ck: clock-dpll-usb-m2-8@190 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_usb_m2_ck";
 		clocks = <&dpll_usb_ck>;
 		ti,max-div = <127>;
 		ti,autoidle-shift = <8>;
@@ -1241,9 +1393,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_pcie_ref_m2_ck: dpll_pcie_ref_m2_ck@210 {
+	dpll_pcie_ref_m2_ck: clock-dpll-pcie-ref-m2-8@210 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_pcie_ref_m2_ck";
 		clocks = <&dpll_pcie_ref_ck>;
 		ti,max-div = <127>;
 		ti,autoidle-shift = <8>;
@@ -1252,15 +1405,17 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_per_x2_ck: dpll_per_x2_ck {
+	dpll_per_x2_ck: clock-dpll-per-x2 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-x2-clock";
+		clock-output-names = "dpll_per_x2_ck";
 		clocks = <&dpll_per_ck>;
 	};
 
-	dpll_per_h11x2_ck: dpll_per_h11x2_ck@158 {
+	dpll_per_h11x2_ck: clock-dpll-per-h11x2-8@158 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_h11x2_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <63>;
 		ti,autoidle-shift = <8>;
@@ -1269,9 +1424,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_per_h12x2_ck: dpll_per_h12x2_ck@15c {
+	dpll_per_h12x2_ck: clock-dpll-per-h12x2-8@15c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_h12x2_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <63>;
 		ti,autoidle-shift = <8>;
@@ -1280,9 +1436,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_per_h13x2_ck: dpll_per_h13x2_ck@160 {
+	dpll_per_h13x2_ck: clock-dpll-per-h13x2-8@160 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_h13x2_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <63>;
 		ti,autoidle-shift = <8>;
@@ -1291,9 +1448,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_per_h14x2_ck: dpll_per_h14x2_ck@164 {
+	dpll_per_h14x2_ck: clock-dpll-per-h14x2-8@164 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_h14x2_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <63>;
 		ti,autoidle-shift = <8>;
@@ -1302,9 +1460,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 {
+	dpll_per_m2x2_ck: clock-dpll-per-m2x2-8@150 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_m2x2_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -1313,105 +1472,118 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_usb_clkdcoldo: dpll_usb_clkdcoldo {
+	dpll_usb_clkdcoldo: clock-dpll-usb-clkdcoldo {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dpll_usb_clkdcoldo";
 		clocks = <&dpll_usb_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	func_128m_clk: func_128m_clk {
+	func_128m_clk: clock-func-128m {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "func_128m_clk";
 		clocks = <&dpll_per_h11x2_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	func_12m_fclk: func_12m_fclk {
+	func_12m_fclk: clock-func-12m-fclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "func_12m_fclk";
 		clocks = <&dpll_per_m2x2_ck>;
 		clock-mult = <1>;
 		clock-div = <16>;
 	};
 
-	func_24m_clk: func_24m_clk {
+	func_24m_clk: clock-func-24m {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "func_24m_clk";
 		clocks = <&dpll_per_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <4>;
 	};
 
-	func_48m_fclk: func_48m_fclk {
+	func_48m_fclk: clock-func-48m-fclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "func_48m_fclk";
 		clocks = <&dpll_per_m2x2_ck>;
 		clock-mult = <1>;
 		clock-div = <4>;
 	};
 
-	func_96m_fclk: func_96m_fclk {
+	func_96m_fclk: clock-func-96m-fclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "func_96m_fclk";
 		clocks = <&dpll_per_m2x2_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	l3init_60m_fclk: l3init_60m_fclk@104 {
+	l3init_60m_fclk: clock-l3init-60m@104 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "l3init_60m_fclk";
 		clocks = <&dpll_usb_m2_ck>;
 		reg = <0x0104>;
 		ti,dividers = <1>, <8>;
 	};
 
-	clkout2_clk: clkout2_clk@6b0 {
+	clkout2_clk: clock-clkout2-8@6b0 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "clkout2_clk";
 		clocks = <&clkoutmux2_clk_mux>;
 		ti,bit-shift = <8>;
 		reg = <0x06b0>;
 	};
 
-	l3init_960m_gfclk: l3init_960m_gfclk@6c0 {
+	l3init_960m_gfclk: clock-l3init-960m-gfclk-8@6c0 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "l3init_960m_gfclk";
 		clocks = <&dpll_usb_clkdcoldo>;
 		ti,bit-shift = <8>;
 		reg = <0x06c0>;
 	};
 
-	usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k@640 {
+	usb_phy1_always_on_clk32k: clock-usb-phy1-always-on-clk32k-8@640 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "usb_phy1_always_on_clk32k";
 		clocks = <&sys_32k_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0640>;
 	};
 
-	usb_phy2_always_on_clk32k: usb_phy2_always_on_clk32k@688 {
+	usb_phy2_always_on_clk32k: clock-usb-phy2-always-on-clk32k-8@688 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "usb_phy2_always_on_clk32k";
 		clocks = <&sys_32k_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0688>;
 	};
 
-	usb_phy3_always_on_clk32k: usb_phy3_always_on_clk32k@698 {
+	usb_phy3_always_on_clk32k: clock-usb-phy3-always-on-clk32k-8@698 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "usb_phy3_always_on_clk32k";
 		clocks = <&sys_32k_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0698>;
 	};
 
-	gpu_core_gclk_mux: gpu_core_gclk_mux@1220 {
+	gpu_core_gclk_mux: clock-gpu-core-gclk-mux-24@1220 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "gpu_core_gclk_mux";
 		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>;
 		ti,bit-shift = <24>;
 		reg = <0x1220>;
@@ -1419,9 +1591,10 @@
 		assigned-clock-parents = <&dpll_gpu_m2_ck>;
 	};
 
-	gpu_hyd_gclk_mux: gpu_hyd_gclk_mux@1220 {
+	gpu_hyd_gclk_mux: clock-gpu-hyd-gclk-mux-26@1220 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "gpu_hyd_gclk_mux";
 		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>;
 		ti,bit-shift = <26>;
 		reg = <0x1220>;
@@ -1429,34 +1602,38 @@
 		assigned-clock-parents = <&dpll_gpu_m2_ck>;
 	};
 
-	l3instr_ts_gclk_div: l3instr_ts_gclk_div@e50 {
+	l3instr_ts_gclk_div: clock-l3instr-ts-gclk-div-24@e50 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "l3instr_ts_gclk_div";
 		clocks = <&wkupaon_iclk_mux>;
 		ti,bit-shift = <24>;
 		reg = <0x0e50>;
 		ti,dividers = <8>, <16>, <32>;
 	};
 
-	vip1_gclk_mux: vip1_gclk_mux@1020 {
+	vip1_gclk_mux: clock-vip1-gclk-mux-24@1020 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "vip1_gclk_mux";
 		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
 		ti,bit-shift = <24>;
 		reg = <0x1020>;
 	};
 
-	vip2_gclk_mux: vip2_gclk_mux@1028 {
+	vip2_gclk_mux: clock-vip2-gclk-mux-24@1028 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "vip2_gclk_mux";
 		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
 		ti,bit-shift = <24>;
 		reg = <0x1028>;
 	};
 
-	vip3_gclk_mux: vip3_gclk_mux@1030 {
+	vip3_gclk_mux: clock-vip3-gclk-mux-24@1030 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "vip3_gclk_mux";
 		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
 		ti,bit-shift = <24>;
 		reg = <0x1030>;
@@ -1464,48 +1641,54 @@
 };
 
 &cm_core_clockdomains {
-	coreaon_clkdm: coreaon_clkdm {
+	coreaon_clkdm: clock-coreaon-clkdm {
 		compatible = "ti,clockdomain";
+		clock-output-names = "coreaon_clkdm";
 		clocks = <&dpll_usb_ck>;
 	};
 };
 
 &scm_conf_clocks {
-	dss_deshdcp_clk: dss_deshdcp_clk@558 {
+	dss_deshdcp_clk: clock-dss-deshdcp-0@558 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "dss_deshdcp_clk";
 		clocks = <&l3_iclk_div>;
 		ti,bit-shift = <0>;
 		reg = <0x558>;
 	};
 
-       ehrpwm0_tbclk: ehrpwm0_tbclk@558 {
+       ehrpwm0_tbclk: clock-ehrpwm0-tbclk-20@558 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "ehrpwm0_tbclk";
 		clocks = <&l4_root_clk_div>;
 		ti,bit-shift = <20>;
 		reg = <0x0558>;
 	};
 
-	ehrpwm1_tbclk: ehrpwm1_tbclk@558 {
+	ehrpwm1_tbclk: clock-ehrpwm1-tbclk-21@558 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "ehrpwm1_tbclk";
 		clocks = <&l4_root_clk_div>;
 		ti,bit-shift = <21>;
 		reg = <0x0558>;
 	};
 
-	ehrpwm2_tbclk: ehrpwm2_tbclk@558 {
+	ehrpwm2_tbclk: clock-ehrpwm2-tbclk-22@558 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "ehrpwm2_tbclk";
 		clocks = <&l4_root_clk_div>;
 		ti,bit-shift = <22>;
 		reg = <0x0558>;
 	};
 
-	sys_32k_ck: sys_32k_ck {
+	sys_32k_ck: clock-sys-32k {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "sys_32k_ck";
 		clocks = <&sys_clk32_crystal_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x6c4>;
@@ -1513,97 +1696,110 @@
 };
 
 &cm_core_aon {
-	mpu_cm: mpu-cm@300 {
+	mpu_cm: clock@300 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "mpu_cm";
 		reg = <0x300 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x300 0x100>;
 
-		mpu_clkctrl: mpu-clkctrl@20 {
+		mpu_clkctrl: clock@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "mpu_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
 
 	};
 
-	dsp1_cm: dsp1-cm@400 {
+	dsp1_cm: clock@400 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "dsp1_cm";
 		reg = <0x400 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x400 0x100>;
 
-		dsp1_clkctrl: dsp1-clkctrl@20 {
+		dsp1_clkctrl: clock@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "dsp1_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
 
 	};
 
-	ipu_cm: ipu-cm@500 {
+	ipu_cm: clock@500 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "ipu_cm";
 		reg = <0x500 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x500 0x100>;
 
-		ipu1_clkctrl: ipu1-clkctrl@20 {
+		ipu1_clkctrl: clock@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "ipu1_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 			assigned-clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 24>;
 			assigned-clock-parents = <&dpll_core_h22x2_ck>;
 		};
 
-		ipu_clkctrl: ipu-clkctrl@50 {
+		ipu_clkctrl: clock@50 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "ipu_clkctrl";
 			reg = <0x50 0x34>;
 			#clock-cells = <2>;
 		};
 
 	};
 
-	dsp2_cm: dsp2-cm@600 {
+	dsp2_cm: clock@600 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "dsp2_cm";
 		reg = <0x600 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x600 0x100>;
 
-		dsp2_clkctrl: dsp2-clkctrl@20 {
+		dsp2_clkctrl: clock@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "dsp2_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
 
 	};
 
-	rtc_cm: rtc-cm@700 {
+	rtc_cm: clock@700 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "rtc_cm";
 		reg = <0x700 0x60>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x700 0x60>;
 
-		rtc_clkctrl: rtc-clkctrl@20 {
+		rtc_clkctrl: clock@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "rtc_clkctrl";
 			reg = <0x20 0x28>;
 			#clock-cells = <2>;
 		};
 	};
 
-	vpe_cm: vpe-cm@760 {
+	vpe_cm: clock@760 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "vpe_cm";
 		reg = <0x760 0xc>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x760 0xc>;
 
-		vpe_clkctrl: vpe-clkctrl@0 {
+		vpe_clkctrl: clock@0 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "vpe_clkctrl";
 			reg = <0x0 0xc>;
 			#clock-cells = <2>;
 		};
@@ -1612,212 +1808,242 @@
 };
 
 &cm_core {
-	coreaon_cm: coreaon-cm@600 {
+	coreaon_cm: clock@600 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "coreaon_cm";
 		reg = <0x600 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x600 0x100>;
 
-		coreaon_clkctrl: coreaon-clkctrl@20 {
+		coreaon_clkctrl: clock@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "coreaon_clkctrl";
 			reg = <0x20 0x1c>;
 			#clock-cells = <2>;
 		};
 	};
 
-	l3main1_cm: l3main1-cm@700 {
+	l3main1_cm: clock@700 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l3main1_cm";
 		reg = <0x700 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x700 0x100>;
 
-		l3main1_clkctrl: l3main1-clkctrl@20 {
+		l3main1_clkctrl: clock@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3main1_clkctrl";
 			reg = <0x20 0x74>;
 			#clock-cells = <2>;
 		};
 
 	};
 
-	ipu2_cm: ipu2-cm@900 {
+	ipu2_cm: clock@900 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "ipu2_cm";
 		reg = <0x900 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x900 0x100>;
 
-		ipu2_clkctrl: ipu2-clkctrl@20 {
+		ipu2_clkctrl: clock@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "ipu2_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
 
 	};
 
-	dma_cm: dma-cm@a00 {
+	dma_cm: clock@a00 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "dma_cm";
 		reg = <0xa00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0xa00 0x100>;
 
-		dma_clkctrl: dma-clkctrl@20 {
+		dma_clkctrl: clock@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "dma_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
 	};
 
-	emif_cm: emif-cm@b00 {
+	emif_cm: clock@b00 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "emif_cm";
 		reg = <0xb00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0xb00 0x100>;
 
-		emif_clkctrl: emif-clkctrl@20 {
+		emif_clkctrl: clock@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "emif_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
 	};
 
-	atl_cm: atl-cm@c00 {
+	atl_cm: clock@c00 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "atl_cm";
 		reg = <0xc00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0xc00 0x100>;
 
-		atl_clkctrl: atl-clkctrl@0 {
+		atl_clkctrl: clock@0 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "atl_clkctrl";
 			reg = <0x0 0x4>;
 			#clock-cells = <2>;
 		};
 	};
 
-	l4cfg_cm: l4cfg-cm@d00 {
+	l4cfg_cm: clock@d00 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l4cfg_cm";
 		reg = <0xd00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0xd00 0x100>;
 
-		l4cfg_clkctrl: l4cfg-clkctrl@20 {
+		l4cfg_clkctrl: clock@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l4cfg_clkctrl";
 			reg = <0x20 0x84>;
 			#clock-cells = <2>;
 		};
 	};
 
-	l3instr_cm: l3instr-cm@e00 {
+	l3instr_cm: clock@e00 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l3instr_cm";
 		reg = <0xe00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0xe00 0x100>;
 
-		l3instr_clkctrl: l3instr-clkctrl@20 {
+		l3instr_clkctrl: clock@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3instr_clkctrl";
 			reg = <0x20 0xc>;
 			#clock-cells = <2>;
 		};
 	};
 
-	iva_cm: iva-cm@f00 {
+	iva_cm: clock@f00 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "iva_cm";
 		reg = <0xf00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0xf00 0x100>;
 
-		iva_clkctrl: iva-clkctrl@20 {
+		iva_clkctrl: clock@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "iva_clkctrl";
 			reg = <0x20 0xc>;
 			#clock-cells = <2>;
 		};
 	};
 
-	cam_cm: cam-cm@1000 {
+	cam_cm: clock@1000 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "cam_cm";
 		reg = <0x1000 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x1000 0x100>;
 
-		cam_clkctrl: cam-clkctrl@20 {
+		cam_clkctrl: clock@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "cam_clkctrl";
 			reg = <0x20 0x2c>;
 			#clock-cells = <2>;
 		};
 	};
 
-	dss_cm: dss-cm@1100 {
+	dss_cm: clock@1100 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "dss_cm";
 		reg = <0x1100 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x1100 0x100>;
 
-		dss_clkctrl: dss-clkctrl@20 {
+		dss_clkctrl: clock@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "dss_clkctrl";
 			reg = <0x20 0x14>;
 			#clock-cells = <2>;
 		};
 	};
 
-	gpu_cm: gpu-cm@1200 {
+	gpu_cm: clock@1200 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "gpu_cm";
 		reg = <0x1200 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x1200 0x100>;
 
-		gpu_clkctrl: gpu-clkctrl@20 {
+		gpu_clkctrl: clock@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "gpu_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
 	};
 
-	l3init_cm: l3init-cm@1300 {
+	l3init_cm: clock@1300 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l3init_cm";
 		reg = <0x1300 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x1300 0x100>;
 
-		l3init_clkctrl: l3init-clkctrl@20 {
+		l3init_clkctrl: clock@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3init_clkctrl";
 			reg = <0x20 0x6c>, <0xe0 0x14>;
 			#clock-cells = <2>;
 		};
 
-		pcie_clkctrl: pcie-clkctrl@b0 {
+		pcie_clkctrl: clock@b0 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "pcie_clkctrl";
 			reg = <0xb0 0xc>;
 			#clock-cells = <2>;
 		};
 
-		gmac_clkctrl: gmac-clkctrl@d0 {
+		gmac_clkctrl: clock@d0 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "gmac_clkctrl";
 			reg = <0xd0 0x4>;
 			#clock-cells = <2>;
 		};
 
 	};
 
-	l4per_cm: l4per-cm@1700 {
+	l4per_cm: clock@1700 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l4per_cm";
 		reg = <0x1700 0x300>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x1700 0x300>;
 
-		l4per_clkctrl: l4per-clkctrl@28 {
+		l4per_clkctrl: clock@28 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l4per_clkctrl";
 			reg = <0x28 0x64>, <0xa0 0x24>, <0xf0 0x3c>, <0x140 0x1c>, <0x170 0x4>;
 			#clock-cells = <2>;
 
@@ -1825,20 +2051,23 @@
 			assigned-clock-parents = <&abe_24m_fclk>;
 		};
 
-		l4sec_clkctrl: l4sec-clkctrl@1a0 {
+		l4sec_clkctrl: clock@1a0 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l4sec_clkctrl";
 			reg = <0x1a0 0x2c>;
 			#clock-cells = <2>;
 		};
 
-		l4per2_clkctrl: l4per2-clkctrl@c {
+		l4per2_clkctrl: clock@c {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l4per2_clkctrl";
 			reg = <0xc 0x4>, <0x18 0xc>, <0x90 0xc>, <0xc4 0x4>, <0x138 0x4>, <0x160 0xc>, <0x178 0x24>, <0x1d0 0x3c>;
 			#clock-cells = <2>;
 		};
 
-		l4per3_clkctrl: l4per3-clkctrl@14 {
+		l4per3_clkctrl: clock@14 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l4per3_clkctrl";
 			reg = <0x14 0x4>, <0xc8 0x14>, <0x130 0x4>;
 			#clock-cells = <2>;
 		};
@@ -1847,15 +2076,17 @@
 };
 
 &prm {
-	wkupaon_cm: wkupaon-cm@1800 {
+	wkupaon_cm: clock@1800 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "wkupaon_cm";
 		reg = <0x1800 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x1800 0x100>;
 
-		wkupaon_clkctrl: wkupaon-clkctrl@20 {
+		wkupaon_clkctrl: clock@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "wkupaon_clkctrl";
 			reg = <0x20 0x6c>;
 			#clock-cells = <2>;
 		};
diff --git a/arch/arm/boot/dts/e60k02.dtsi b/arch/arm/boot/dts/e60k02.dtsi
index 1a49f15f2df2..935e2359f8df 100644
--- a/arch/arm/boot/dts/e60k02.dtsi
+++ b/arch/arm/boot/dts/e60k02.dtsi
@@ -22,14 +22,14 @@
 	gpio_keys: gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "Power";
 			gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			wakeup-source;
 		};
 
-		cover {
+		key-cover {
 			label = "Cover";
 			gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
 			linux,code = <SW_LID>;
diff --git a/arch/arm/boot/dts/e70k02.dtsi b/arch/arm/boot/dts/e70k02.dtsi
index 156de653f2cd..27ef9a62b23c 100644
--- a/arch/arm/boot/dts/e70k02.dtsi
+++ b/arch/arm/boot/dts/e70k02.dtsi
@@ -26,14 +26,14 @@
 	gpio_keys: gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "Power";
 			gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			wakeup-source;
 		};
 
-		cover {
+		key-cover {
 			label = "Cover";
 			gpios = <&gpio4 23 GPIO_ACTIVE_LOW>;
 			linux,code = <SW_LID>;
@@ -41,13 +41,13 @@
 			wakeup-source;
 		};
 
-		pageup {
+		key-pageup {
 			label = "PageUp";
 			gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_PAGEUP>;
 		};
 
-		pagedown {
+		key-pagedown {
 			label = "PageDown";
 			gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_PAGEDOWN>;
diff --git a/arch/arm/boot/dts/ecx-common.dtsi b/arch/arm/boot/dts/ecx-common.dtsi
index 57a028a69373..ce5221c6b358 100644
--- a/arch/arm/boot/dts/ecx-common.dtsi
+++ b/arch/arm/boot/dts/ecx-common.dtsi
@@ -9,11 +9,11 @@
 	};
 
 	psci {
-		compatible	= "arm,psci";
-		method		= "smc";
-		cpu_suspend	= <0x84000002>;
-		cpu_off		= <0x84000004>;
-		cpu_on		= <0x84000006>;
+		compatible = "arm,psci";
+		method = "smc";
+		cpu_suspend = <0x84000002>;
+		cpu_off = <0x84000004>;
+		cpu_on = <0x84000006>;
 	};
 
 	soc {
diff --git a/arch/arm/boot/dts/en7523-evb.dts b/arch/arm/boot/dts/en7523-evb.dts
new file mode 100644
index 000000000000..f23a25cce119
--- /dev/null
+++ b/arch/arm/boot/dts/en7523-evb.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/dts-v1/;
+
+/* Bootloader installs ATF here */
+/memreserve/ 0x80000000 0x200000;
+
+#include "en7523.dtsi"
+
+/ {
+	model = "Airoha EN7523 Evaluation Board";
+	compatible = "airoha,en7523-evb", "airoha,en7523";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+		stdout-path = "serial0:115200n8";
+		linux,usable-memory-range = <0x80200000 0x1fe00000>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/en7523.dtsi b/arch/arm/boot/dts/en7523.dtsi
new file mode 100644
index 000000000000..7f839331a777
--- /dev/null
+++ b/arch/arm/boot/dts/en7523.dtsi
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/en7523-clk.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		npu_binary@84000000 {
+			no-map;
+			reg = <0x84000000 0xA00000>;
+		};
+
+		npu_flag@84B0000 {
+			no-map;
+			reg = <0x84B00000 0x100000>;
+		};
+
+		npu_pkt@85000000 {
+			no-map;
+			reg = <0x85000000 0x1A00000>;
+		};
+
+		npu_phyaddr@86B00000 {
+			no-map;
+			reg = <0x86B00000 0x100000>;
+		};
+
+		npu_rxdesc@86D00000 {
+			no-map;
+			reg = <0x86D00000 0x100000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+			clock-frequency = <80000000>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+			clock-frequency = <80000000>;
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	scu: system-controller@1fa20000 {
+		compatible = "airoha,en7523-scu";
+		reg = <0x1fa20000 0x400>,
+		      <0x1fb00000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	gic: interrupt-controller@9000000 {
+		compatible = "arm,gic-v3";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x09000000 0x20000>,
+		      <0x09080000 0x80000>,
+		      <0x09400000 0x2000>,
+		      <0x09500000 0x2000>,
+		      <0x09600000 0x20000>;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	uart1: serial@1fbf0000 {
+		compatible = "ns16550";
+		reg = <0x1fbf0000 0x30>;
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <1843200>;
+		status = "okay";
+	};
+
+	gpio0: gpio@1fbf0200 {
+		compatible = "airoha,en7523-gpio";
+		reg = <0x1fbf0204 0x4>,
+		      <0x1fbf0200 0x4>,
+		      <0x1fbf0220 0x4>,
+		      <0x1fbf0214 0x4>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio1: gpio@1fbf0270 {
+		compatible = "airoha,en7523-gpio";
+		reg = <0x1fbf0270 0x4>,
+		      <0x1fbf0260 0x4>,
+		      <0x1fbf0264 0x4>,
+		      <0x1fbf0278 0x4>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pcie0: pcie@1fa91000 {
+		compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie";
+		device_type = "pci";
+		reg = <0x1fa91000 0x1000>;
+		reg-names = "port0";
+		linux,pci-domain = <0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "pcie_irq";
+		clocks = <&scu EN7523_CLK_PCIE>;
+		clock-names = "sys_ck0";
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x20000000  0x20000000  0 0x8000000>;
+		status = "disabled";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+				<0 0 0 2 &pcie_intc0 1>,
+				<0 0 0 3 &pcie_intc0 2>,
+				<0 0 0 4 &pcie_intc0 3>;
+		pcie_intc0: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+
+	pcie1: pcie@1fa92000 {
+		compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie";
+		device_type = "pci";
+		reg = <0x1fa92000 0x1000>;
+		reg-names = "port1";
+		linux,pci-domain = <1>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "pcie_irq";
+		clocks = <&scu EN7523_CLK_PCIE>;
+		clock-names = "sys_ck1";
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x28000000  0x28000000  0 0x8000000>;
+		status = "disabled";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+				<0 0 0 2 &pcie_intc1 1>,
+				<0 0 0 3 &pcie_intc1 2>,
+				<0 0 0 4 &pcie_intc1 3>;
+		pcie_intc1: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/exynos-pinctrl.h b/arch/arm/boot/dts/exynos-pinctrl.h
new file mode 100644
index 000000000000..e3a6df95281c
--- /dev/null
+++ b/arch/arm/boot/dts/exynos-pinctrl.h
@@ -0,0 +1,55 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Samsung Exynos DTS pinctrl constants
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2022 Linaro Ltd
+ * Author: Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#ifndef __DTS_ARM_SAMSUNG_EXYNOS_PINCTRL_H__
+#define __DTS_ARM_SAMSUNG_EXYNOS_PINCTRL_H__
+
+#define EXYNOS_PIN_PULL_NONE		0
+#define EXYNOS_PIN_PULL_DOWN		1
+#define EXYNOS_PIN_PULL_UP		3
+
+/* Pin function in power down mode */
+#define EXYNOS_PIN_PDN_OUT0		0
+#define EXYNOS_PIN_PDN_OUT1		1
+#define EXYNOS_PIN_PDN_INPUT		2
+#define EXYNOS_PIN_PDN_PREV		3
+
+/* Drive strengths for Exynos3250, Exynos4 (all) and Exynos5250 */
+#define EXYNOS4_PIN_DRV_LV1		0
+#define EXYNOS4_PIN_DRV_LV2		2
+#define EXYNOS4_PIN_DRV_LV3		1
+#define EXYNOS4_PIN_DRV_LV4		3
+
+/* Drive strengths for Exynos5260 */
+#define EXYNOS5260_PIN_DRV_LV1		0
+#define EXYNOS5260_PIN_DRV_LV2		1
+#define EXYNOS5260_PIN_DRV_LV4		2
+#define EXYNOS5260_PIN_DRV_LV6		3
+
+/*
+ * Drive strengths for Exynos5410, Exynos542x, Exynos5800 and Exynos850 (except
+ * GPIO_HSI block)
+ */
+#define EXYNOS5420_PIN_DRV_LV1		0
+#define EXYNOS5420_PIN_DRV_LV2		1
+#define EXYNOS5420_PIN_DRV_LV3		2
+#define EXYNOS5420_PIN_DRV_LV4		3
+
+#define EXYNOS_PIN_FUNC_INPUT		0
+#define EXYNOS_PIN_FUNC_OUTPUT		1
+#define EXYNOS_PIN_FUNC_2		2
+#define EXYNOS_PIN_FUNC_3		3
+#define EXYNOS_PIN_FUNC_4		4
+#define EXYNOS_PIN_FUNC_5		5
+#define EXYNOS_PIN_FUNC_6		6
+#define EXYNOS_PIN_FUNC_EINT		0xf
+#define EXYNOS_PIN_FUNC_F		EXYNOS_PIN_FUNC_EINT
+
+#endif /* __DTS_ARM_SAMSUNG_EXYNOS_PINCTRL_H__ */
diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
index 829c05b2c405..0ac3f284fbb8 100644
--- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
+++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
@@ -356,15 +356,15 @@
 };
 
 &pinctrl_1 {
-	bten: bten {
-		samsung,pins ="gpx1-7";
+	bten: bten-pins {
+		samsung,pins = "gpx1-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
 		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_DOWN>;
 	};
 
-	wlanen: wlanen {
+	wlanen: wlanen-pins {
 		samsung,pins = "gpx2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -372,12 +372,12 @@
 		samsung,pin-val = <1>;
 	};
 
-	s2mps14_irq: s2mps14-irq {
+	s2mps14_irq: s2mps14-irq-pins {
 		samsung,pins = "gpx3-5";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	bthostwake: bthostwake {
+	bthostwake: bthostwake-pins {
 		samsung,pins = "gpx3-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -385,7 +385,7 @@
 		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	btwake: btwake {
+	btwake: btwake-pins {
 		samsung,pins = "gpx3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
index 8b41a9d5e2db..02a9dc479d34 100644
--- a/arch/arm/boot/dts/exynos3250-monk.dts
+++ b/arch/arm/boot/dts/exynos3250-monk.dts
@@ -69,7 +69,7 @@
 			reg = <0x25>;
 			wakeup-source;
 
-			muic: max77836-muic {
+			extcon {
 				compatible = "maxim,max77836-muic";
 			};
 
diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
index dff3c6e3aa1f..011ba2eff29e 100644
--- a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
@@ -9,50 +9,25 @@
  * tree nodes are listed in this file.
  */
 
-#include <dt-bindings/pinctrl/samsung.h>
+#include "exynos-pinctrl.h"
 
 #define PIN_IN(_pin, _pull, _drv)					\
-	_pin {								\
+	pin- ## _pin {							\
 		samsung,pins = #_pin;					\
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;		\
 		samsung,pin-pud = <EXYNOS_PIN_PULL_ ##_pull>;		\
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>;		\
 	}
 
-#define PIN_OUT(_pin, _drv)						\
-	_pin {								\
-		samsung,pins = #_pin;					\
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;	\
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;		\
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>;		\
-	}
-
-#define PIN_OUT_SET(_pin, _val, _drv)					\
-	_pin {								\
-		samsung,pins = #_pin;					\
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;	\
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;		\
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>;		\
-		samsung,pin-val = <_val>;				\
-	}
-
-#define PIN_CFG(_pin, _sel, _pull, _drv)				\
-	_pin {								\
-		samsung,pins = #_pin;					\
-		samsung,pin-function = <_sel>;				\
-		samsung,pin-pud = <EXYNOS_PIN_PULL_ ##_pull>;		\
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>;		\
-	}
-
 #define PIN_SLP(_pin, _mode, _pull)					\
-	_pin {								\
+	pin- ## _pin {							\
 		samsung,pins = #_pin;					\
 		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_ ##_mode>;	\
 		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_ ##_pull>;	\
 	}
 
 &pinctrl_0 {
-	gpa0: gpa0 {
+	gpa0: gpa0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -60,7 +35,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpa1: gpa1 {
+	gpa1: gpa1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -68,7 +43,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb: gpb {
+	gpb: gpb-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -76,7 +51,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc0: gpc0 {
+	gpc0: gpc0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -84,7 +59,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc1: gpc1 {
+	gpc1: gpc1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -92,7 +67,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd0: gpd0 {
+	gpd0: gpd0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -100,7 +75,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd1: gpd1 {
+	gpd1: gpd1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -108,84 +83,84 @@
 		#interrupt-cells = <2>;
 	};
 
-	uart0_data: uart0-data {
+	uart0_data: uart0-data-pins {
 		samsung,pins = "gpa0-0", "gpa0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart0_fctl: uart0-fctl {
+	uart0_fctl: uart0-fctl-pins {
 		samsung,pins = "gpa0-2", "gpa0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart1_data: uart1-data {
+	uart1_data: uart1-data-pins {
 		samsung,pins = "gpa0-4", "gpa0-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart1_fctl: uart1-fctl {
+	uart1_fctl: uart1-fctl-pins {
 		samsung,pins = "gpa0-6", "gpa0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c2_bus: i2c2-bus {
+	i2c2_bus: i2c2-bus-pins {
 		samsung,pins = "gpa0-6", "gpa0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart2_data: uart2-data {
+	uart2_data: uart2-data-pins {
 		samsung,pins = "gpa1-0", "gpa1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c3_bus: i2c3-bus {
+	i2c3_bus: i2c3-bus-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spi0_bus: spi0-bus {
+	spi0_bus: spi0-bus-pins {
 		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c4_bus: i2c4-bus {
+	i2c4_bus: i2c4-bus-pins {
 		samsung,pins = "gpb-0", "gpb-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spi1_bus: spi1-bus {
+	spi1_bus: spi1-bus-pins {
 		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c5_bus: i2c5-bus {
+	i2c5_bus: i2c5-bus-pins {
 		samsung,pins = "gpb-2", "gpb-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2s2_bus: i2s2-bus {
+	i2s2_bus: i2s2-bus-pins {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -193,7 +168,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pcm2_bus: pcm2-bus {
+	pcm2_bus: pcm2-bus-pins {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -201,63 +176,63 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c6_bus: i2c6-bus {
+	i2c6_bus: i2c6-bus-pins {
 		samsung,pins = "gpc1-3", "gpc1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm0_out: pwm0-out {
+	pwm0_out: pwm0-out-pins {
 		samsung,pins = "gpd0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm1_out: pwm1-out {
+	pwm1_out: pwm1-out-pins {
 		samsung,pins = "gpd0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c7_bus: i2c7-bus {
+	i2c7_bus: i2c7-bus-pins {
 		samsung,pins = "gpd0-2", "gpd0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm2_out: pwm2-out {
+	pwm2_out: pwm2-out-pins {
 		samsung,pins = "gpd0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm3_out: pwm3-out {
+	pwm3_out: pwm3-out-pins {
 		samsung,pins = "gpd0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c0_bus: i2c0-bus {
+	i2c0_bus: i2c0-bus-pins {
 		samsung,pins = "gpd1-0", "gpd1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	mipi0_clk: mipi0-clk {
+	mipi0_clk: mipi0-clk-pins {
 		samsung,pins = "gpd1-0", "gpd1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c1_bus: i2c1-bus {
+	i2c1_bus: i2c1-bus-pins {
 		samsung,pins = "gpd1-2", "gpd1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -266,22 +241,22 @@
 };
 
 &pinctrl_1 {
-	gpe0: gpe0 {
+	gpe0: gpe0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpe1: gpe1 {
+	gpe1: gpe1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpe2: gpe2 {
+	gpe2: gpe2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpk0: gpk0 {
+	gpk0: gpk0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -289,7 +264,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk1: gpk1 {
+	gpk1: gpk1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -297,7 +272,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk2: gpk2 {
+	gpk2: gpk2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -305,7 +280,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpl0: gpl0 {
+	gpl0: gpl0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -313,7 +288,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpm0: gpm0 {
+	gpm0: gpm0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -321,7 +296,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpm1: gpm1 {
+	gpm1: gpm1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -329,7 +304,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpm2: gpm2 {
+	gpm2: gpm2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -337,7 +312,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpm3: gpm3 {
+	gpm3: gpm3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -345,7 +320,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpm4: gpm4 {
+	gpm4: gpm4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -353,7 +328,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx0: gpx0 {
+	gpx0: gpx0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -370,7 +345,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx1: gpx1 {
+	gpx1: gpx1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -387,7 +362,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx2: gpx2 {
+	gpx2: gpx2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -395,7 +370,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx3: gpx3 {
+	gpx3: gpx3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -403,126 +378,126 @@
 		#interrupt-cells = <2>;
 	};
 
-	sd0_clk: sd0-clk {
+	sd0_clk: sd0-clk-pins {
 		samsung,pins = "gpk0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_cmd: sd0-cmd {
+	sd0_cmd: sd0-cmd-pins {
 		samsung,pins = "gpk0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_cd: sd0-cd {
+	sd0_cd: sd0-cd-pins {
 		samsung,pins = "gpk0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_rdqs: sd0-rdqs {
+	sd0_rdqs: sd0-rdqs-pins {
 		samsung,pins = "gpk0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_bus1: sd0-bus-width1 {
+	sd0_bus1: sd0-bus-width1-pins {
 		samsung,pins = "gpk0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_bus4: sd0-bus-width4 {
+	sd0_bus4: sd0-bus-width4-pins {
 		samsung,pins = "gpk0-4", "gpk0-5", "gpk0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_bus8: sd0-bus-width8 {
+	sd0_bus8: sd0-bus-width8-pins {
 		samsung,pins = "gpl0-0", "gpl0-1", "gpl0-2", "gpl0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_clk: sd1-clk {
+	sd1_clk: sd1-clk-pins {
 		samsung,pins = "gpk1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_cmd: sd1-cmd {
+	sd1_cmd: sd1-cmd-pins {
 		samsung,pins = "gpk1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_cd: sd1-cd {
+	sd1_cd: sd1-cd-pins {
 		samsung,pins = "gpk1-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_bus1: sd1-bus-width1 {
+	sd1_bus1: sd1-bus-width1-pins {
 		samsung,pins = "gpk1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_bus4: sd1-bus-width4 {
+	sd1_bus4: sd1-bus-width4-pins {
 		samsung,pins = "gpk1-4", "gpk1-5", "gpk1-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_clk: sd2-clk {
+	sd2_clk: sd2-clk-pins {
 		samsung,pins = "gpk2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_cmd: sd2-cmd {
+	sd2_cmd: sd2-cmd-pins {
 		samsung,pins = "gpk2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_cd: sd2-cd {
+	sd2_cd: sd2-cd-pins {
 		samsung,pins = "gpk2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_bus1: sd2-bus-width1 {
+	sd2_bus1: sd2-bus-width1-pins {
 		samsung,pins = "gpk2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_bus4: sd2-bus-width4 {
+	sd2_bus4: sd2-bus-width4-pins {
 		samsung,pins = "gpk2-4", "gpk2-5", "gpk2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	cam_port_b_io: cam-port-b-io {
+	cam_port_b_io: cam-port-b-io-pins {
 		samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
 				"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
 				"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
@@ -531,35 +506,35 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_port_b_clk_active: cam-port-b-clk-active {
+	cam_port_b_clk_active: cam-port-b-clk-active-pins {
 		samsung,pins = "gpm2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	cam_port_b_clk_idle: cam-port-b-clk-idle {
+	cam_port_b_clk_idle: cam-port-b-clk-idle-pins {
 		samsung,pins = "gpm2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	fimc_is_i2c0: fimc-is-i2c0 {
+	fimc_is_i2c0: fimc-is-i2c0-pins {
 		samsung,pins = "gpm4-0", "gpm4-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	fimc_is_i2c1: fimc-is-i2c1 {
+	fimc_is_i2c1: fimc-is-i2c1-pins {
 		samsung,pins = "gpm4-2", "gpm4-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	fimc_is_uart: fimc-is-uart {
+	fimc_is_uart: fimc-is-uart-pins {
 		samsung,pins = "gpm3-5", "gpm3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index 5f7f8fedfb92..6d2c7bb19184 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -70,7 +70,7 @@
 			reg = <0x25>;
 			wakeup-source;
 
-			muic: max77836-muic {
+			extcon {
 				compatible = "maxim,max77836-muic";
 			};
 
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index a10b789d8acf..326b9e0ed8d3 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -269,7 +269,8 @@
 		};
 
 		timer@10050000 {
-			compatible = "samsung,exynos4210-mct";
+			compatible = "samsung,exynos3250-mct",
+				     "samsung,exynos4210-mct";
 			reg = <0x10050000 0x800>;
 			interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
@@ -375,7 +376,7 @@
 			status = "disabled";
 		};
 
-		mshc_0: mshc@12510000 {
+		mshc_0: mmc@12510000 {
 			compatible = "samsung,exynos5420-dw-mshc";
 			reg = <0x12510000 0x1000>;
 			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
@@ -387,7 +388,7 @@
 			status = "disabled";
 		};
 
-		mshc_1: mshc@12520000 {
+		mshc_1: mmc@12520000 {
 			compatible = "samsung,exynos5420-dw-mshc";
 			reg = <0x12520000 0x1000>;
 			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
@@ -399,7 +400,7 @@
 			status = "disabled";
 		};
 
-		mshc_2: mshc@12530000 {
+		mshc_2: mmc@12530000 {
 			compatible = "samsung,exynos5250-dw-mshc";
 			reg = <0x12530000 0x1000>;
 			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
@@ -421,26 +422,22 @@
 			status = "disabled";
 		};
 
-		pdma0: pdma@12680000 {
+		pdma0: dma-controller@12680000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12680000 0x1000>;
 			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_PDMA0>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
 		};
 
-		pdma1: pdma@12690000 {
+		pdma1: dma-controller@12690000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12690000 0x1000>;
 			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_PDMA1>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
 		};
 
 		adc: adc@126c0000 {
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index eab77a66ae8f..5c4ecda27a47 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -316,7 +316,7 @@
 			status = "disabled";
 		};
 
-		sdhci_0: sdhci@12510000 {
+		sdhci_0: mmc@12510000 {
 			compatible = "samsung,exynos4210-sdhci";
 			reg = <0x12510000 0x100>;
 			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
@@ -325,7 +325,7 @@
 			status = "disabled";
 		};
 
-		sdhci_1: sdhci@12520000 {
+		sdhci_1: mmc@12520000 {
 			compatible = "samsung,exynos4210-sdhci";
 			reg = <0x12520000 0x100>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
@@ -334,7 +334,7 @@
 			status = "disabled";
 		};
 
-		sdhci_2: sdhci@12530000 {
+		sdhci_2: mmc@12530000 {
 			compatible = "samsung,exynos4210-sdhci";
 			reg = <0x12530000 0x100>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
@@ -343,7 +343,7 @@
 			status = "disabled";
 		};
 
-		sdhci_3: sdhci@12540000 {
+		sdhci_3: mmc@12540000 {
 			compatible = "samsung,exynos4210-sdhci";
 			reg = <0x12540000 0x100>;
 			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
@@ -373,7 +373,7 @@
 			status = "disabled";
 		};
 
-		ehci: ehci@12580000 {
+		ehci: usb@12580000 {
 			compatible = "samsung,exynos4210-ehci";
 			reg = <0x12580000 0x100>;
 			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
@@ -384,7 +384,7 @@
 			phy-names = "host", "hsic0", "hsic1";
 		};
 
-		ohci: ohci@12590000 {
+		ohci: usb@12590000 {
 			compatible = "samsung,exynos4210-ohci";
 			reg = <0x12590000 0x100>;
 			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
@@ -669,37 +669,31 @@
 			status = "disabled";
 		};
 
-		pdma0: pdma@12680000 {
+		pdma0: dma-controller@12680000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12680000 0x1000>;
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_PDMA0>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
 		};
 
-		pdma1: pdma@12690000 {
+		pdma1: dma-controller@12690000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12690000 0x1000>;
 			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_PDMA1>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
 		};
 
-		mdma1: mdma@12850000 {
+		mdma1: dma-controller@12850000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12850000 0x1000>;
 			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_MDMA>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <1>;
 		};
 
 		fimd: fimd@11c00000 {
diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts
index 33894054b8b0..bba85011ecc9 100644
--- a/arch/arm/boot/dts/exynos4210-i9100.dts
+++ b/arch/arm/boot/dts/exynos4210-i9100.dts
@@ -89,21 +89,21 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		vol-down {
+		key-vol-down {
 			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
 			label = "volume down";
 			debounce-interval = <10>;
 		};
 
-		vol-up {
+		key-vol-up {
 			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
 			label = "volume up";
 			debounce-interval = <10>;
 		};
 
-		power {
+		key-power {
 			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			label = "power";
@@ -111,7 +111,7 @@
 			wakeup-source;
 		};
 
-		ok {
+		key-ok {
 			gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_OK>;
 			label = "ok";
@@ -672,26 +672,26 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sleep0>;
 
-	sleep0: sleep-states {
-		gpa0-0 {
+	sleep0: sleep-state {
+		gpa0-0-pin {
 			samsung,pins = "gpa0-0";
 			samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
 			samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
 		};
 
-		gpa0-1 {
+		gpa0-1-pin {
 			samsung,pins = "gpa0-1";
 			samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT0>;
 			samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
 		};
 
-		gpa0-2 {
+		gpa0-2-pin {
 			samsung,pins = "gpa0-2";
 			samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
 			samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
 		};
 
-		gpa0-3 {
+		gpa0-3-pin {
 			samsung,pins = "gpa0-3";
 			samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
 			samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
@@ -700,19 +700,19 @@
 };
 
 &pinctrl_1 {
-	mhl_int: mhl-int {
+	mhl_int: mhl-int-pins {
 		samsung,pins = "gpf3-5";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	i2c_mhl_bus: i2c-mhl-bus {
+	i2c_mhl_bus: i2c-mhl-bus-pins {
 		samsung,pins = "gpf0-4", "gpf0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	usb_sel: usb-sel {
+	usb_sel: usb-sel-pins {
 		samsung,pins = "gpl0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -720,7 +720,7 @@
 		samsung,pin-val = <0>;
 	};
 
-	bt_en: bt-en {
+	bt_en: bt-en-pins {
 		samsung,pins = "gpl0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -728,7 +728,7 @@
 		samsung,pin-val = <0>;
 	};
 
-	bt_res: bt-res {
+	bt_res: bt-res-pins {
 		samsung,pins = "gpl1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -736,7 +736,7 @@
 		samsung,pin-val = <0>;
 	};
 
-	otg_gp: otg-gp {
+	otg_gp: otg-gp-pins {
 		samsung,pins = "gpx3-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -744,23 +744,23 @@
 		samsung,pin-val = <0>;
 	};
 
-	mag_mhl_gpio: mag-mhl {
+	mag_mhl_gpio: mag-mhl-pins {
 		samsung,pins = "gpd0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	max8997_irq: max8997-irq {
+	max8997_irq: max8997-irq-pins {
 		samsung,pins = "gpx0-7";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	max17042_fuel_irq: max17042-fuel-irq {
+	max17042_fuel_irq: max17042-fuel-irq-pins {
 		samsung,pins = "gpx2-3";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	tsp224_irq: tsp224-irq {
+	tsp224_irq: tsp224-irq-pins {
 		samsung,pins = "gpx0-4";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 	};
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index 435fda60e86d..5f37b751f700 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -15,6 +15,7 @@
 #include "exynos4210.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 #include "exynos-mfc-reserved-memory.dtsi"
 
 / {
@@ -46,35 +47,35 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		up {
+		key-up {
 			label = "Up";
 			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_UP>;
 			wakeup-source;
 		};
 
-		down {
+		key-down {
 			label = "Down";
 			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_DOWN>;
 			wakeup-source;
 		};
 
-		back {
+		key-back {
 			label = "Back";
 			gpios = <&gpx1 7 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_BACK>;
 			wakeup-source;
 		};
 
-		home {
+		key-home {
 			label = "Home";
 			gpios = <&gpx1 6 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
 			wakeup-source;
 		};
 
-		menu {
+		key-menu {
 			label = "Menu";
 			gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_MENU>;
@@ -86,6 +87,7 @@
 		compatible = "gpio-leds";
 		status {
 			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_HEARTBEAT;
 			linux,default-trigger = "heartbeat";
 		};
 	};
@@ -316,7 +318,7 @@
 };
 
 &pinctrl_1 {
-	max8997_irq: max8997-irq {
+	max8997_irq: max8997-irq-pins {
 		samsung,pins = "gpx0-3", "gpx0-4";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
index 520c5934a8d4..76f44ae0de46 100644
--- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
@@ -11,10 +11,10 @@
  * tree nodes are listed in this file.
  */
 
-#include <dt-bindings/pinctrl/samsung.h>
+#include "exynos-pinctrl.h"
 
 &pinctrl_0 {
-	gpa0: gpa0 {
+	gpa0: gpa0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -22,7 +22,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpa1: gpa1 {
+	gpa1: gpa1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -30,7 +30,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb: gpb {
+	gpb: gpb-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -38,7 +38,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc0: gpc0 {
+	gpc0: gpc0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -46,7 +46,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc1: gpc1 {
+	gpc1: gpc1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -54,7 +54,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd0: gpd0 {
+	gpd0: gpd0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -62,7 +62,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd1: gpd1 {
+	gpd1: gpd1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -70,7 +70,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpe0: gpe0 {
+	gpe0: gpe0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -78,7 +78,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpe1: gpe1 {
+	gpe1: gpe1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -86,7 +86,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpe2: gpe2 {
+	gpe2: gpe2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -94,7 +94,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpe3: gpe3 {
+	gpe3: gpe3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -102,7 +102,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpe4: gpe4 {
+	gpe4: gpe4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -110,7 +110,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf0: gpf0 {
+	gpf0: gpf0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -118,7 +118,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf1: gpf1 {
+	gpf1: gpf1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -126,7 +126,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf2: gpf2 {
+	gpf2: gpf2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -134,7 +134,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf3: gpf3 {
+	gpf3: gpf3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -142,112 +142,112 @@
 		#interrupt-cells = <2>;
 	};
 
-	uart0_data: uart0-data {
+	uart0_data: uart0-data-pins {
 		samsung,pins = "gpa0-0", "gpa0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart0_fctl: uart0-fctl {
+	uart0_fctl: uart0-fctl-pins {
 		samsung,pins = "gpa0-2", "gpa0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart1_data: uart1-data {
+	uart1_data: uart1-data-pins {
 		samsung,pins = "gpa0-4", "gpa0-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart1_fctl: uart1-fctl {
+	uart1_fctl: uart1-fctl-pins {
 		samsung,pins = "gpa0-6", "gpa0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c2_bus: i2c2-bus {
+	i2c2_bus: i2c2-bus-pins {
 		samsung,pins = "gpa0-6", "gpa0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart2_data: uart2-data {
+	uart2_data: uart2-data-pins {
 		samsung,pins = "gpa1-0", "gpa1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart2_fctl: uart2-fctl {
+	uart2_fctl: uart2-fctl-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart_audio_a: uart-audio-a {
+	uart_audio_a: uart-audio-a-pins {
 		samsung,pins = "gpa1-0", "gpa1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c3_bus: i2c3-bus {
+	i2c3_bus: i2c3-bus-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart3_data: uart3-data {
+	uart3_data: uart3-data-pins {
 		samsung,pins = "gpa1-4", "gpa1-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart_audio_b: uart-audio-b {
+	uart_audio_b: uart-audio-b-pins {
 		samsung,pins = "gpa1-4", "gpa1-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spi0_bus: spi0-bus {
+	spi0_bus: spi0-bus-pins {
 		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c4_bus: i2c4-bus {
+	i2c4_bus: i2c4-bus-pins {
 		samsung,pins = "gpb-2", "gpb-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spi1_bus: spi1-bus {
+	spi1_bus: spi1-bus-pins {
 		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c5_bus: i2c5-bus {
+	i2c5_bus: i2c5-bus-pins {
 		samsung,pins = "gpb-6", "gpb-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2s1_bus: i2s1-bus {
+	i2s1_bus: i2s1-bus-pins {
 		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 				"gpc0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -255,7 +255,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pcm1_bus: pcm1-bus {
+	pcm1_bus: pcm1-bus-pins {
 		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 				"gpc0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -263,7 +263,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	ac97_bus: ac97-bus {
+	ac97_bus: ac97-bus-pins {
 		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 				"gpc0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
@@ -271,7 +271,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2s2_bus: i2s2-bus {
+	i2s2_bus: i2s2-bus-pins {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -279,7 +279,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pcm2_bus: pcm2-bus {
+	pcm2_bus: pcm2-bus-pins {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -287,105 +287,105 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spdif_bus: spdif-bus {
+	spdif_bus: spdif-bus-pins {
 		samsung,pins = "gpc1-0", "gpc1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c6_bus: i2c6-bus {
+	i2c6_bus: i2c6-bus-pins {
 		samsung,pins = "gpc1-3", "gpc1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spi2_bus: spi2-bus {
+	spi2_bus: spi2-bus-pins {
 		samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c7_bus: i2c7-bus {
+	i2c7_bus: i2c7-bus-pins {
 		samsung,pins = "gpd0-2", "gpd0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c0_bus: i2c0-bus {
+	i2c0_bus: i2c0-bus-pins {
 		samsung,pins = "gpd1-0", "gpd1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c1_bus: i2c1-bus {
+	i2c1_bus: i2c1-bus-pins {
 		samsung,pins = "gpd1-2", "gpd1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm0_out: pwm0-out {
+	pwm0_out: pwm0-out-pins {
 		samsung,pins = "gpd0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm1_out: pwm1-out {
+	pwm1_out: pwm1-out-pins {
 		samsung,pins = "gpd0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm2_out: pwm2-out {
+	pwm2_out: pwm2-out-pins {
 		samsung,pins = "gpd0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm3_out: pwm3-out {
+	pwm3_out: pwm3-out-pins {
 		samsung,pins = "gpd0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lcd_ctrl: lcd-ctrl {
+	lcd_ctrl: lcd-ctrl-pins {
 		samsung,pins = "gpd0-0", "gpd0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lcd_sync: lcd-sync {
+	lcd_sync: lcd-sync-pins {
 		samsung,pins = "gpf0-0", "gpf0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lcd_en: lcd-en {
+	lcd_en: lcd-en-pins {
 		samsung,pins = "gpe3-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lcd_clk: lcd-clk {
+	lcd_clk: lcd-clk-pins {
 		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lcd_data16: lcd-data-width16 {
+	lcd_data16: lcd-data-width16-pins {
 		samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2",
 				"gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0",
 				"gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7",
@@ -395,7 +395,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lcd_data18: lcd-data-width18 {
+	lcd_data18: lcd-data-width18-pins {
 		samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1",
 				"gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7",
 				"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
@@ -406,7 +406,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lcd_data24: lcd-data-width24 {
+	lcd_data24: lcd-data-width24-pins {
 		samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
 				"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
 				"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
@@ -420,7 +420,7 @@
 };
 
 &pinctrl_1 {
-	gpj0: gpj0 {
+	gpj0: gpj0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -428,7 +428,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpj1: gpj1 {
+	gpj1: gpj1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -436,7 +436,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk0: gpk0 {
+	gpk0: gpk0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -444,7 +444,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk1: gpk1 {
+	gpk1: gpk1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -452,7 +452,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk2: gpk2 {
+	gpk2: gpk2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -460,7 +460,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk3: gpk3 {
+	gpk3: gpk3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -468,7 +468,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpl0: gpl0 {
+	gpl0: gpl0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -476,7 +476,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpl1: gpl1 {
+	gpl1: gpl1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -484,7 +484,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpl2: gpl2 {
+	gpl2: gpl2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -492,42 +492,42 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpy0: gpy0 {
+	gpy0: gpy0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy1: gpy1 {
+	gpy1: gpy1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy2: gpy2 {
+	gpy2: gpy2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy3: gpy3 {
+	gpy3: gpy3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy4: gpy4 {
+	gpy4: gpy4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy5: gpy5 {
+	gpy5: gpy5-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy6: gpy6 {
+	gpy6: gpy6-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpx0: gpx0 {
+	gpx0: gpx0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -544,7 +544,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx1: gpx1 {
+	gpx1: gpx1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -561,7 +561,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx2: gpx2 {
+	gpx2: gpx2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -569,7 +569,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx3: gpx3 {
+	gpx3: gpx3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -577,238 +577,238 @@
 		#interrupt-cells = <2>;
 	};
 
-	sd0_clk: sd0-clk {
+	sd0_clk: sd0-clk-pins {
 		samsung,pins = "gpk0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_cmd: sd0-cmd {
+	sd0_cmd: sd0-cmd-pins {
 		samsung,pins = "gpk0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_cd: sd0-cd {
+	sd0_cd: sd0-cd-pins {
 		samsung,pins = "gpk0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_bus1: sd0-bus-width1 {
+	sd0_bus1: sd0-bus-width1-pins {
 		samsung,pins = "gpk0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_bus4: sd0-bus-width4 {
+	sd0_bus4: sd0-bus-width4-pins {
 		samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_bus8: sd0-bus-width8 {
+	sd0_bus8: sd0-bus-width8-pins {
 		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd4_clk: sd4-clk {
+	sd4_clk: sd4-clk-pins {
 		samsung,pins = "gpk0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd4_cmd: sd4-cmd {
+	sd4_cmd: sd4-cmd-pins {
 		samsung,pins = "gpk0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd4_cd: sd4-cd {
+	sd4_cd: sd4-cd-pins {
 		samsung,pins = "gpk0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd4_bus1: sd4-bus-width1 {
+	sd4_bus1: sd4-bus-width1-pins {
 		samsung,pins = "gpk0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd4_bus4: sd4-bus-width4 {
+	sd4_bus4: sd4-bus-width4-pins {
 		samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd4_bus8: sd4-bus-width8 {
+	sd4_bus8: sd4-bus-width8-pins {
 		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_clk: sd1-clk {
+	sd1_clk: sd1-clk-pins {
 		samsung,pins = "gpk1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_cmd: sd1-cmd {
+	sd1_cmd: sd1-cmd-pins {
 		samsung,pins = "gpk1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_cd: sd1-cd {
+	sd1_cd: sd1-cd-pins {
 		samsung,pins = "gpk1-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_bus1: sd1-bus-width1 {
+	sd1_bus1: sd1-bus-width1-pins {
 		samsung,pins = "gpk1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_bus4: sd1-bus-width4 {
+	sd1_bus4: sd1-bus-width4-pins {
 		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_clk: sd2-clk {
+	sd2_clk: sd2-clk-pins {
 		samsung,pins = "gpk2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_cmd: sd2-cmd {
+	sd2_cmd: sd2-cmd-pins {
 		samsung,pins = "gpk2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_cd: sd2-cd {
+	sd2_cd: sd2-cd-pins {
 		samsung,pins = "gpk2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_bus1: sd2-bus-width1 {
+	sd2_bus1: sd2-bus-width1-pins {
 		samsung,pins = "gpk2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_bus4: sd2-bus-width4 {
+	sd2_bus4: sd2-bus-width4-pins {
 		samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_bus8: sd2-bus-width8 {
+	sd2_bus8: sd2-bus-width8-pins {
 		samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_clk: sd3-clk {
+	sd3_clk: sd3-clk-pins {
 		samsung,pins = "gpk3-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_cmd: sd3-cmd {
+	sd3_cmd: sd3-cmd-pins {
 		samsung,pins = "gpk3-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_cd: sd3-cd {
+	sd3_cd: sd3-cd-pins {
 		samsung,pins = "gpk3-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_bus1: sd3-bus-width1 {
+	sd3_bus1: sd3-bus-width1-pins {
 		samsung,pins = "gpk3-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_bus4: sd3-bus-width4 {
+	sd3_bus4: sd3-bus-width4-pins {
 		samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	eint0: ext-int0 {
+	eint0: ext-int0-pins {
 		samsung,pins = "gpx0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	eint8: ext-int8 {
+	eint8: ext-int8-pins {
 		samsung,pins = "gpx1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	eint15: ext-int15 {
+	eint15: ext-int15-pins {
 		samsung,pins = "gpx1-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	eint16: ext-int16 {
+	eint16: ext-int16-pins {
 		samsung,pins = "gpx2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	eint31: ext-int31 {
+	eint31: ext-int31-pins {
 		samsung,pins = "gpx3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_port_a_io: cam-port-a-io {
+	cam_port_a_io: cam-port-a-io-pins {
 		samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
 				"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
 				"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
@@ -817,21 +817,21 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_port_a_clk_active: cam-port-a-clk-active {
+	cam_port_a_clk_active: cam-port-a-clk-active-pins {
 		samsung,pins = "gpj1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	cam_port_a_clk_idle: cam-port-a-clk-idle {
+	cam_port_a_clk_idle: cam-port-a-clk-idle-pins {
 		samsung,pins = "gpj1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	hdmi_cec: hdmi-cec {
+	hdmi_cec: hdmi-cec-pins {
 		samsung,pins = "gpx3-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -840,12 +840,12 @@
 };
 
 &pinctrl_2 {
-	gpz: gpz {
+	gpz: gpz-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	i2s0_bus: i2s0-bus {
+	i2s0_bus: i2s0-bus-pins {
 		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
 				"gpz-4", "gpz-5", "gpz-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -853,7 +853,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pcm0_bus: pcm0-bus {
+	pcm0_bus: pcm0-bus-pins {
 		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
 				"gpz-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index d5797a67bf48..a5dfd7fd49b3 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -152,14 +152,14 @@
 };
 
 &pinctrl_1 {
-	keypad_rows: keypad-rows {
+	keypad_rows: keypad-rows-pins {
 		samsung,pins = "gpx2-0", "gpx2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	keypad_cols: keypad-cols {
+	keypad_cols: keypad-cols-pins {
 		samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
 			       "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index 9c4ff7521348..b8e9dd23fc51 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -180,7 +180,7 @@
 		vdd3-supply = <&vcclcd_reg>;
 		vci-supply = <&vlcd_reg>;
 		reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
-		power-on-delay= <50>;
+		power-on-delay = <50>;
 		reset-delay = <100>;
 		init-delay = <100>;
 		flip-horizontal;
@@ -464,19 +464,19 @@
 };
 
 &pinctrl_1 {
-	bt_shutdown: bt-shutdown {
+	bt_shutdown: bt-shutdown-pins {
 		samsung,pins = "gpl1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	bt_host_wakeup: bt-host-wakeup {
+	bt_host_wakeup: bt-host-wakeup-pins {
 		samsung,pins = "gpx2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	bt_device_wakeup: bt-device-wakeup {
+	bt_device_wakeup: bt-device-wakeup-pins {
 		samsung,pins = "gpx3-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index 9f93e7464aed..62bf335d5bed 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -533,37 +533,37 @@
 };
 
 &pinctrl_1 {
-	bt_shutdown: bt-shutdown {
+	bt_shutdown: bt-shutdown-pins {
 		samsung,pins = "gpe1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	bt_host_wakeup: bt-host-wakeup {
+	bt_host_wakeup: bt-host-wakeup-pins {
 		samsung,pins = "gpx2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	bt_device_wakeup: bt-device-wakeup {
+	bt_device_wakeup: bt-device-wakeup-pins {
 		samsung,pins = "gpx3-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	lp3974_irq: lp3974-irq {
+	lp3974_irq: lp3974-irq-pins {
 		samsung,pins = "gpx0-7", "gpx2-7";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	hdmi_hpd: hdmi-hpd {
+	hdmi_hpd: hdmi-hpd-pins {
 		samsung,pins = "gpx3-7";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 };
 
 &pinctrl_0 {
-	i2c_ddc_bus: i2c-ddc-bus {
+	i2c_ddc_bus: i2c-ddc-bus-pins {
 		samsung,pins = "gpe4-2", "gpe4-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -659,15 +659,13 @@
 };
 
 &soc {
-	mdma0: mdma@12840000 {
+	mdma0: dma-controller@12840000 {
 		compatible = "arm,pl330", "arm,primecell";
 		reg = <0x12840000 0x1000>;
 		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_MDMA>;
 		clock-names = "apb_pclk";
 		#dma-cells = <1>;
-		#dma-channels = <8>;
-		#dma-requests = <1>;
 		power-domains = <&pd_lcd0>;
 	};
 };
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 7e7d65ce6585..2c25cc37934e 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -527,8 +527,6 @@
 	compatible = "samsung,exynos4210-tmu";
 	clocks = <&clock CLK_TMU_APBIF>;
 	clock-names = "tmu_apbif";
-	samsung,tmu_gain = <15>;
-	samsung,tmu_reference_voltage = <7>;
 };
 
 #include "exynos4210-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
index c14e37dc3a9b..94122e9c6625 100644
--- a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
+++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
@@ -7,6 +7,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/leds/common.h>
 #include "exynos4412-midas.dtsi"
 
 / {
@@ -25,8 +26,9 @@
 		pinctrl-1 = <&camera_flash_host>;
 		pinctrl-2 = <&camera_flash_isp>;
 
-		flash-led {
-			label = "flash";
+		led {
+			function = LED_FUNCTION_FLASH;
+			color = <LED_COLOR_ID_WHITE>;
 			led-max-microamp = <520833>;
 			flash-max-microamp = <1012500>;
 			flash-max-timeout-us = <1940000>;
@@ -107,7 +109,7 @@
 		vdd3-supply = <&lcd_vdd3_reg>;
 		vci-supply = <&ldo25_reg>;
 		reset-gpios = <&gpf2 1 GPIO_ACTIVE_HIGH>;
-		power-on-delay= <50>;
+		power-on-delay = <50>;
 		reset-delay = <100>;
 		init-delay = <100>;
 		flip-horizontal;
@@ -151,13 +153,13 @@
 };
 
 &pinctrl_0 {
-	camera_flash_host: camera-flash-host {
+	camera_flash_host: camera-flash-host-pins {
 		samsung,pins = "gpj1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-val = <0>;
 	};
 
-	camera_flash_isp: camera-flash-isp {
+	camera_flash_isp: camera-flash-isp-pins {
 		samsung,pins = "gpj1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-val = <1>;
diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts
index 47431307cb3c..202ab0fee3b7 100644
--- a/arch/arm/boot/dts/exynos4412-itop-elite.dts
+++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts
@@ -11,6 +11,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/pwm/pwm.h>
 #include <dt-bindings/sound/samsung-i2s.h>
 #include "exynos4412-itop-scp-core.dtsi"
@@ -28,7 +29,8 @@
 		compatible = "gpio-leds";
 
 		led2 {
-			label = "red:system";
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_RED>;
 			gpios = <&gpx1 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 			linux,default-trigger = "heartbeat";
@@ -36,6 +38,7 @@
 
 		led3 {
 			label = "red:user";
+			color = <LED_COLOR_ID_RED>;
 			gpios = <&gpk1 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
@@ -44,31 +47,31 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		home {
+		key-home {
 			label = "GPIO Key Home";
 			linux,code = <KEY_HOME>;
 			gpios = <&gpx1 1 GPIO_ACTIVE_LOW>;
 		};
 
-		back {
+		key-back {
 			label = "GPIO Key Back";
 			linux,code = <KEY_BACK>;
 			gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
 		};
 
-		sleep {
+		key-sleep {
 			label = "GPIO Key Sleep";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
 		};
 
-		vol-up {
+		key-vol-up {
 			label = "GPIO Key Vol+";
 			linux,code = <KEY_UP>;
 			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
 		};
 
-		vol-down {
+		key-vol-down {
 			label = "GPIO Key Vol-";
 			linux,code = <KEY_DOWN>;
 			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
@@ -192,7 +195,7 @@
 };
 
 &pinctrl_1 {
-	ether-reset {
+	ether-reset-pins {
 		samsung,pins = "gpc0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
index b3726d4d7d93..a67cb61e3cbb 100644
--- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
+++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
@@ -484,7 +484,7 @@
 };
 
 &pinctrl_1 {
-	hsic_reset: hsic-reset {
+	hsic_reset: hsic-reset-pins {
 		samsung,pins = "gpm2-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
index 968c7943653e..8e1c19a8ad06 100644
--- a/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -12,11 +12,12 @@
 /dts-v1/;
 #include "exynos4412.dtsi"
 #include "exynos4412-ppmu-common.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/clock/maxim,max77686.h>
-#include <dt-bindings/pinctrl/samsung.h>
+#include "exynos-pinctrl.h"
 
 / {
 	compatible = "samsung,midas", "samsung,exynos4412", "samsung,exynos4";
@@ -585,7 +586,7 @@
 		clocks = <&camera 1>;
 		clock-names = "extclk";
 		samsung,camclk-out = <1>;
-		gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>;
+		gpios = <&gpm1 6 GPIO_ACTIVE_LOW>;
 
 		port {
 			is_s5k6a3_ep: endpoint {
@@ -987,19 +988,19 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sleep0>;
 
-	mhl_int: mhl-int {
+	mhl_int: mhl-int-pins {
 		samsung,pins = "gpf3-5";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	i2c_mhl_bus: i2c-mhl-bus {
+	i2c_mhl_bus: i2c-mhl-bus-pins {
 		samsung,pins = "gpf0-4", "gpf0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	sleep0: sleep-states {
+	sleep0: sleep-state {
 		PIN_SLP(gpa0-0, INPUT, NONE);
 		PIN_SLP(gpa0-1, OUT0, NONE);
 		PIN_SLP(gpa0-2, INPUT, NONE);
@@ -1102,52 +1103,52 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sleep1>;
 
-	gpio_keys: gpio-keys {
+	gpio_keys: gpio-keys-pins {
 		samsung,pins = "gpx0-1", "gpx2-2", "gpx2-7", "gpx3-3";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	bt_shutdown: bt-shutdown {
+	bt_shutdown: bt-shutdown-pins {
 		samsung,pins = "gpl0-6";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	bt_host_wakeup: bt-host-wakeup {
+	bt_host_wakeup: bt-host-wakeup-pins {
 		samsung,pins = "gpx2-6";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	bt_device_wakeup: bt-device-wakeup {
+	bt_device_wakeup: bt-device-wakeup-pins {
 		samsung,pins = "gpx3-1";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	max77686_irq: max77686-irq {
+	max77686_irq: max77686-irq-pins {
 		samsung,pins = "gpx0-7";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	max77693_irq: max77693-irq {
+	max77693_irq: max77693-irq-pins {
 		samsung,pins = "gpx1-5";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	max77693_fuel_irq: max77693-fuel-irq {
+	max77693_fuel_irq: max77693-fuel-irq-pins {
 		samsung,pins = "gpx2-3";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	sdhci2_cd: sdhci2-cd-irq {
+	sdhci2_cd: sdhci2-cd-irq-pins {
 		samsung,pins = "gpx3-4";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	hdmi_hpd: hdmi-hpd {
+	hdmi_hpd: hdmi-hpd-pins {
 		samsung,pins = "gpx3-7";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 	};
 
-	sleep1: sleep-states {
+	sleep1: sleep-state {
 		PIN_SLP(gpk0-0, PREV, NONE);
 		PIN_SLP(gpk0-1, PREV, NONE);
 		PIN_SLP(gpk0-2, OUT0, NONE);
@@ -1300,7 +1301,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sleep2>;
 
-	sleep2: sleep-states {
+	sleep2: sleep-state {
 		PIN_SLP(gpz-0, INPUT, DOWN);
 		PIN_SLP(gpz-1, INPUT, DOWN);
 		PIN_SLP(gpz-2, INPUT, DOWN);
@@ -1315,7 +1316,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sleep3>;
 
-	sleep3: sleep-states {
+	sleep3: sleep-state {
 		PIN_SLP(gpv0-0, INPUT, DOWN);
 		PIN_SLP(gpv0-1, INPUT, DOWN);
 		PIN_SLP(gpv0-2, INPUT, DOWN);
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index 5b1d4591b35c..e7669b9e9edb 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -172,24 +172,24 @@
 };
 
 &pinctrl_1 {
-	gpio_power_key: power-key {
+	gpio_power_key: power-key-pins {
 		samsung,pins = "gpx1-3";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	max77686_irq: max77686-irq {
+	max77686_irq: max77686-irq-pins {
 		samsung,pins = "gpx3-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	hdmi_hpd: hdmi-hpd {
+	hdmi_hpd: hdmi-hpd-pins {
 		samsung,pins = "gpx3-7";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 	};
 
-	emmc_rstn: emmc-rstn {
+	emmc_rstn: emmc-rstn-pins {
 		samsung,pins = "gpk1-2";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts
index efaf7533e84f..a5ad88b897ff 100644
--- a/arch/arm/boot/dts/exynos4412-odroidu3.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts
@@ -9,6 +9,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/leds/common.h>
 #include "exynos4412-odroid-common.dtsi"
 #include "exynos4412-prime.dtsi"
 
@@ -37,7 +38,8 @@
 	leds {
 		compatible = "gpio-leds";
 		led1 {
-			label = "led1:heart";
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_BLUE>;
 			gpios = <&gpc1 0 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
@@ -119,8 +121,8 @@
 	phys = <&exynos_usbphy 2>, <&exynos_usbphy 3>;
 	phy-names = "hsic0", "hsic1";
 
-	ethernet: usbether@2 {
-		compatible = "usb0424,9730";
+	ethernet: ethernet@2 {
+		compatible = "usb424,9730";
 		reg = <2>;
 		local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */
 	};
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index 440135d0ff2a..68d589e081bc 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -9,6 +9,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/leds/common.h>
 #include "exynos4412-odroid-common.dtsi"
 
 / {
@@ -27,13 +28,15 @@
 	leds {
 		compatible = "gpio-leds";
 		led1 {
-			label = "led1:heart";
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_BLUE>;
 			gpios = <&gpc1 0 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 		led2 {
 			label = "led2:mmc0";
+			function = LED_FUNCTION_DISK_ACTIVITY;
 			gpios = <&gpc1 2 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 			linux,default-trigger = "mmc0";
@@ -70,19 +73,19 @@
 	phy-names = "hsic0";
 
 	hub@2 {
-		compatible = "usb0424,3503";
+		compatible = "usb424,3503";
 		reg = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
 		hub@1 {
-			compatible = "usb0424,9514";
+			compatible = "usb424,9514";
 			reg = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			ethernet: usbether@1 {
-				compatible = "usb0424,ec00";
+			ethernet: ethernet@1 {
+				compatible = "usb424,ec00";
 				reg = <1>;
 				/* Filled in by a bootloader */
 				local-mac-address = [00 00 00 00 00 00];
@@ -112,7 +115,7 @@
 };
 
 &pinctrl_1 {
-	gpio_home_key: home-key {
+	gpio_home_key: home-key-pins {
 		samsung,pins = "gpx2-2";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index e6aec5facabf..a3905e27b9cd 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -95,7 +95,7 @@
 };
 
 &ehci {
-	samsung,vbus-gpio = <&gpx3 5 1>;
+	samsung,vbus-gpio = <&gpx3 5 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 	phys = <&exynos_usbphy 2>, <&exynos_usbphy 3>;
 	phy-names = "hsic0", "hsic1";
@@ -506,14 +506,14 @@
 };
 
 &pinctrl_1 {
-	keypad_rows: keypad-rows {
+	keypad_rows: keypad-rows-pins {
 		samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	keypad_cols: keypad-cols {
+	keypad_cols: keypad-cols-pins {
 		samsung,pins = "gpx1-0", "gpx1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos4412-p4note.dtsi b/arch/arm/boot/dts/exynos4412-p4note.dtsi
index 22c3086e0076..7a515b87bc7c 100644
--- a/arch/arm/boot/dts/exynos4412-p4note.dtsi
+++ b/arch/arm/boot/dts/exynos4412-p4note.dtsi
@@ -15,7 +15,8 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/samsung.h>
+#include <dt-bindings/power/summit,smb347-charger.h>
+#include "exynos-pinctrl.h"
 
 / {
 	compatible = "samsung,p4note", "samsung,exynos4412", "samsung,exynos4";
@@ -105,6 +106,16 @@
 		regulator-always-on;
 	};
 
+	panel_vdd: voltage-regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD_ENABLE";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_enable>;
+		gpios = <&gpc0 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
 	wlan_pwrseq: sdhci3-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&gpm3 5 GPIO_ACTIVE_LOW>;
@@ -114,6 +125,17 @@
 		clock-names = "ext_clock";
 	};
 
+	battery_cell: battery-cell {
+		compatible = "simple-battery";
+		device-chemistry = "lithium-ion";
+		constant-charge-current-max-microamp = <2200000>;
+		precharge-current-microamp = <250000>;
+		charge-term-current-microamp = <250000>;
+		constant-charge-voltage-max-microvolt = <4200000>;
+
+		power-supplies = <&power_supply>;
+	};
+
 	i2c-gpio-1 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -182,6 +204,54 @@
 			};
 		};
 	};
+
+	i2c-gpio-4 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		power_supply: charger@6 {
+			compatible = "summit,smb347";
+			reg = <0x6>;
+			summit,enable-usb-charging;
+			summit,enable-charge-control = <SMB3XX_CHG_ENABLE_SW>;
+			summit,fast-voltage-threshold-microvolt = <2600000>;
+			summit,chip-temperature-threshold-celsius = <130>;
+			summit,usb-current-limit-microamp = <1800000>;
+
+			monitored-battery = <&battery_cell>;
+		};
+	};
+
+	panel {
+		compatible = "samsung,ltl101al01";
+		pinctrl-0 = <&lvds_nshdn>;
+		pinctrl-names = "default";
+		power-supply = <&panel_vdd>;
+		enable-gpios = <&gpm0 5 GPIO_ACTIVE_HIGH>;
+		backlight = <&backlight>;
+
+		port {
+			lcd_ep: endpoint {
+				remote-endpoint = <&fimd_ep>;
+			};
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-0 = <&led_bl_reset>;
+		pinctrl-names = "default";
+		enable-gpios = <&gpm0 1 GPIO_ACTIVE_HIGH>;
+		pwms = <&pwm 1 78770 0>;
+		brightness-levels = <0 48 128 255>;
+		num-interpolated-steps = <8>;
+		default-brightness-level = <12>;
+	};
 };
 
 &adc {
@@ -261,22 +331,19 @@
 };
 
 &fimd {
-	pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
+	pinctrl-0 = <&lcd_clk &lcd_data24>;
 	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 
-	display-timings {
-		timing0 {
-			clock-frequency = <66666666>;
-			hactive = <1280>;
-			vactive = <800>;
-			hfront-porch = <18>;
-			hback-porch = <36>;
-			hsync-len = <16>;
-			vback-porch = <16>;
-			vfront-porch = <4>;
-			vsync-len = <3>;
-			hsync-active = <1>;
+	samsung,invert-vclk;
+
+	port@3 {
+		reg = <3>;
+
+		fimd_ep: endpoint {
+			remote-endpoint = <&lcd_ep>;
 		};
 	};
 };
@@ -641,19 +708,25 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sleep0>;
 
-	tsp_reg_gpio_2: tsp-reg-gpio-2 {
+	tsp_reg_gpio_2: tsp-reg-gpio-2-pins {
 		samsung,pins = "gpb-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	tsp_reg_gpio_3: tsp-reg-gpio-3 {
+	tsp_reg_gpio_3: tsp-reg-gpio-3-pins {
 		samsung,pins = "gpb-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	sleep0: sleep-states {
+	lcd_enable: lcd-enable-pins {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	sleep0: sleep-state {
 		PIN_SLP(gpa0-0, INPUT, NONE);
 		PIN_SLP(gpa0-1, OUT0, NONE);
 		PIN_SLP(gpa0-2, INPUT, NONE);
@@ -755,19 +828,19 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sleep1>;
 
-	sd3_wifi: sd3-wifi {
+	sd3_wifi: sd3-wifi-pins {
 		samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	bt_shutdown: bt-shutdown {
+	bt_shutdown: bt-shutdown-pins {
 		samsung,pins = "gpl0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	uart_sel: uart-sel {
+	uart_sel: uart-sel-pins {
 		samsung,pins = "gpl2-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -775,82 +848,94 @@
 		/* 0 = CP, 1 = AP (serial output) */
 	};
 
-	tsp_rst: tsp-rst {
+	led_bl_reset: led-bl-reset-pins {
+		samsung,pins = "gpm0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	tsp_rst: tsp-rst-pins {
 		samsung,pins = "gpm0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	tsp_irq: tsp-irq {
+	lvds_nshdn: lvds-nshdn-pins {
+		samsung,pins = "gpm0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	tsp_irq: tsp-irq-pins {
 		samsung,pins = "gpm2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	wifi_reset: wifi-reset {
+	wifi_reset: wifi-reset-pins {
 		samsung,pins = "gpm3-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	tsp_reg_gpio_1: tsp-reg-gpio-1 {
+	tsp_reg_gpio_1: tsp-reg-gpio-1-pins {
 		samsung,pins = "gpm4-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	ak8975_irq: ak8975-irq {
+	ak8975_irq: ak8975-irq-pins {
 		samsung,pins = "gpm4-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 	};
 
-	stmpe_adc_irq: stmpe-adc-irq {
+	stmpe_adc_irq: stmpe-adc-irq-pins {
 		samsung,pins = "gpx0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	max77686_irq: max77686-irq {
+	max77686_irq: max77686-irq-pins {
 		samsung,pins = "gpx0-7";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	gpio_keys: gpio-keys {
+	gpio_keys: gpio-keys-pins {
 		samsung,pins = "gpx2-2", "gpx2-7", "gpx3-3";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	fuel_alert_irq: fuel-alert-irq {
+	fuel_alert_irq: fuel-alert-irq-pins {
 		samsung,pins = "gpx2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	wifi_host_wake: wifi-host-wake {
+	wifi_host_wake: wifi-host-wake-pins {
 		samsung,pins = "gpx2-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 	};
 
-	bt_host_wakeup: bt-host-wakeup {
+	bt_host_wakeup: bt-host-wakeup-pins {
 		samsung,pins = "gpx2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	bt_device_wakeup: bt-device-wakeup {
+	bt_device_wakeup: bt-device-wakeup-pins {
 		samsung,pins = "gpx3-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	sdhci2_cd: sdhci2-cd {
+	sdhci2_cd: sdhci2-cd-pins {
 		samsung,pins = "gpx3-4";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	sleep1: sleep-states {
+	sleep1: sleep-state {
 		PIN_SLP(gpk0-0, PREV, NONE);
 		PIN_SLP(gpk0-1, PREV, NONE);
 		PIN_SLP(gpk0-2, PREV, NONE);
@@ -1004,7 +1089,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sleep2>;
 
-	sleep2: sleep-states {
+	sleep2: sleep-state {
 		PIN_SLP(gpz-0, INPUT, DOWN);
 		PIN_SLP(gpz-1, INPUT, DOWN);
 		PIN_SLP(gpz-2, INPUT, DOWN);
@@ -1019,7 +1104,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sleep3>;
 
-	sleep3: sleep-states {
+	sleep3: sleep-state {
 		PIN_SLP(gpv0-0, INPUT, DOWN);
 		PIN_SLP(gpv0-1, INPUT, DOWN);
 		PIN_SLP(gpv0-2, INPUT, DOWN);
@@ -1066,6 +1151,13 @@
 	assigned-clock-parents = <&clock CLK_XUSBXTI>;
 };
 
+&pwm {
+	pinctrl-0 = <&pwm1_out>;
+	pinctrl-names = "default";
+	samsung,pwm-outputs = <1>;
+	status = "okay";
+};
+
 &rtc {
 	clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
 	clock-names = "rtc", "rtc_src";
diff --git a/arch/arm/boot/dts/exynos4412-pinctrl.dtsi b/arch/arm/boot/dts/exynos4412-pinctrl.dtsi
index d7d5fdc230d8..58847d4fa846 100644
--- a/arch/arm/boot/dts/exynos4412-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4412-pinctrl.dtsi
@@ -9,7 +9,7 @@
  * tree nodes are listed in this file.
  */
 
-#include <dt-bindings/pinctrl/samsung.h>
+#include "exynos-pinctrl.h"
 
 #define PIN_SLP(_pin, _mode, _pull)					\
 	_pin {								\
@@ -19,7 +19,7 @@
 	}
 
 &pinctrl_0 {
-	gpa0: gpa0 {
+	gpa0: gpa0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -27,7 +27,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpa1: gpa1 {
+	gpa1: gpa1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -35,7 +35,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb: gpb {
+	gpb: gpb-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -43,7 +43,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc0: gpc0 {
+	gpc0: gpc0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -51,7 +51,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc1: gpc1 {
+	gpc1: gpc1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -59,7 +59,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd0: gpd0 {
+	gpd0: gpd0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -67,7 +67,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd1: gpd1 {
+	gpd1: gpd1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -75,7 +75,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf0: gpf0 {
+	gpf0: gpf0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -83,7 +83,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf1: gpf1 {
+	gpf1: gpf1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -91,7 +91,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf2: gpf2 {
+	gpf2: gpf2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -99,7 +99,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf3: gpf3 {
+	gpf3: gpf3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -107,7 +107,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpj0: gpj0 {
+	gpj0: gpj0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -115,7 +115,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpj1: gpj1 {
+	gpj1: gpj1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -123,112 +123,112 @@
 		#interrupt-cells = <2>;
 	};
 
-	uart0_data: uart0-data {
+	uart0_data: uart0-data-pins {
 		samsung,pins = "gpa0-0", "gpa0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart0_fctl: uart0-fctl {
+	uart0_fctl: uart0-fctl-pins {
 		samsung,pins = "gpa0-2", "gpa0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart1_data: uart1-data {
+	uart1_data: uart1-data-pins {
 		samsung,pins = "gpa0-4", "gpa0-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart1_fctl: uart1-fctl {
+	uart1_fctl: uart1-fctl-pins {
 		samsung,pins = "gpa0-6", "gpa0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c2_bus: i2c2-bus {
+	i2c2_bus: i2c2-bus-pins {
 		samsung,pins = "gpa0-6", "gpa0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart2_data: uart2-data {
+	uart2_data: uart2-data-pins {
 		samsung,pins = "gpa1-0", "gpa1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart2_fctl: uart2-fctl {
+	uart2_fctl: uart2-fctl-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart_audio_a: uart-audio-a {
+	uart_audio_a: uart-audio-a-pins {
 		samsung,pins = "gpa1-0", "gpa1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c3_bus: i2c3-bus {
+	i2c3_bus: i2c3-bus-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart3_data: uart3-data {
+	uart3_data: uart3-data-pins {
 		samsung,pins = "gpa1-4", "gpa1-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart_audio_b: uart-audio-b {
+	uart_audio_b: uart-audio-b-pins {
 		samsung,pins = "gpa1-4", "gpa1-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spi0_bus: spi0-bus {
+	spi0_bus: spi0-bus-pins {
 		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c4_bus: i2c4-bus {
+	i2c4_bus: i2c4-bus-pins {
 		samsung,pins = "gpb-0", "gpb-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spi1_bus: spi1-bus {
+	spi1_bus: spi1-bus-pins {
 		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c5_bus: i2c5-bus {
+	i2c5_bus: i2c5-bus-pins {
 		samsung,pins = "gpb-2", "gpb-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2s1_bus: i2s1-bus {
+	i2s1_bus: i2s1-bus-pins {
 		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 				"gpc0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -236,7 +236,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pcm1_bus: pcm1-bus {
+	pcm1_bus: pcm1-bus-pins {
 		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 				"gpc0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -244,7 +244,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	ac97_bus: ac97-bus {
+	ac97_bus: ac97-bus-pins {
 		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 				"gpc0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
@@ -252,7 +252,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2s2_bus: i2s2-bus {
+	i2s2_bus: i2s2-bus-pins {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -260,7 +260,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pcm2_bus: pcm2-bus {
+	pcm2_bus: pcm2-bus-pins {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -268,105 +268,105 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spdif_bus: spdif-bus {
+	spdif_bus: spdif-bus-pins {
 		samsung,pins = "gpc1-0", "gpc1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c6_bus: i2c6-bus {
+	i2c6_bus: i2c6-bus-pins {
 		samsung,pins = "gpc1-3", "gpc1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spi2_bus: spi2-bus {
+	spi2_bus: spi2-bus-pins {
 		samsung,pins = "gpc1-1", "gpc1-3", "gpc1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm0_out: pwm0-out {
+	pwm0_out: pwm0-out-pins {
 		samsung,pins = "gpd0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm1_out: pwm1-out {
+	pwm1_out: pwm1-out-pins {
 		samsung,pins = "gpd0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lcd_ctrl: lcd-ctrl {
+	lcd_ctrl: lcd-ctrl-pins {
 		samsung,pins = "gpd0-0", "gpd0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c7_bus: i2c7-bus {
+	i2c7_bus: i2c7-bus-pins {
 		samsung,pins = "gpd0-2", "gpd0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm2_out: pwm2-out {
+	pwm2_out: pwm2-out-pins {
 		samsung,pins = "gpd0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm3_out: pwm3-out {
+	pwm3_out: pwm3-out-pins {
 		samsung,pins = "gpd0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c0_bus: i2c0-bus {
+	i2c0_bus: i2c0-bus-pins {
 		samsung,pins = "gpd1-0", "gpd1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	mipi0_clk: mipi0-clk {
+	mipi0_clk: mipi0-clk-pins {
 		samsung,pins = "gpd1-0", "gpd1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c1_bus: i2c1-bus {
+	i2c1_bus: i2c1-bus-pins {
 		samsung,pins = "gpd1-2", "gpd1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	mipi1_clk: mipi1-clk {
+	mipi1_clk: mipi1-clk-pins {
 		samsung,pins = "gpd1-2", "gpd1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lcd_clk: lcd-clk {
+	lcd_clk: lcd-clk-pins {
 		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lcd_data16: lcd-data-width16 {
+	lcd_data16: lcd-data-width16-pins {
 		samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2",
 				"gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0",
 				"gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7",
@@ -376,7 +376,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lcd_data18: lcd-data-width18 {
+	lcd_data18: lcd-data-width18-pins {
 		samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1",
 				"gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7",
 				"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
@@ -387,7 +387,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lcd_data24: lcd-data-width24 {
+	lcd_data24: lcd-data-width24-pins {
 		samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
 				"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
 				"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
@@ -399,14 +399,14 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lcd_ldi: lcd-ldi {
+	lcd_ldi: lcd-ldi-pins {
 		samsung,pins = "gpf3-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_port_a_io: cam-port-a-io {
+	cam_port_a_io: cam-port-a-io-pins {
 		samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
 				"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
 				"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
@@ -415,14 +415,14 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_port_a_clk_active: cam-port-a-clk-active {
+	cam_port_a_clk_active: cam-port-a-clk-active-pins {
 		samsung,pins = "gpj1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	cam_port_a_clk_idle: cam-port-a-clk-idle {
+	cam_port_a_clk_idle: cam-port-a-clk-idle-pins {
 		samsung,pins = "gpj1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
@@ -431,7 +431,7 @@
 };
 
 &pinctrl_1 {
-	gpk0: gpk0 {
+	gpk0: gpk0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -439,7 +439,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk1: gpk1 {
+	gpk1: gpk1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -447,7 +447,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk2: gpk2 {
+	gpk2: gpk2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -455,7 +455,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk3: gpk3 {
+	gpk3: gpk3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -463,7 +463,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpl0: gpl0 {
+	gpl0: gpl0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -471,7 +471,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpl1: gpl1 {
+	gpl1: gpl1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -479,7 +479,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpl2: gpl2 {
+	gpl2: gpl2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -487,7 +487,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpm0: gpm0 {
+	gpm0: gpm0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -495,7 +495,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpm1: gpm1 {
+	gpm1: gpm1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -503,7 +503,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpm2: gpm2 {
+	gpm2: gpm2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -511,7 +511,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpm3: gpm3 {
+	gpm3: gpm3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -519,7 +519,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpm4: gpm4 {
+	gpm4: gpm4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -527,42 +527,42 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpy0: gpy0 {
+	gpy0: gpy0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy1: gpy1 {
+	gpy1: gpy1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy2: gpy2 {
+	gpy2: gpy2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy3: gpy3 {
+	gpy3: gpy3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy4: gpy4 {
+	gpy4: gpy4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy5: gpy5 {
+	gpy5: gpy5-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy6: gpy6 {
+	gpy6: gpy6-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpx0: gpx0 {
+	gpx0: gpx0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -579,7 +579,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx1: gpx1 {
+	gpx1: gpx1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -596,7 +596,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx2: gpx2 {
+	gpx2: gpx2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -604,7 +604,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx3: gpx3 {
+	gpx3: gpx3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -612,203 +612,203 @@
 		#interrupt-cells = <2>;
 	};
 
-	sd0_clk: sd0-clk {
+	sd0_clk: sd0-clk-pins {
 		samsung,pins = "gpk0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_cmd: sd0-cmd {
+	sd0_cmd: sd0-cmd-pins {
 		samsung,pins = "gpk0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_cd: sd0-cd {
+	sd0_cd: sd0-cd-pins {
 		samsung,pins = "gpk0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_bus1: sd0-bus-width1 {
+	sd0_bus1: sd0-bus-width1-pins {
 		samsung,pins = "gpk0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_bus4: sd0-bus-width4 {
+	sd0_bus4: sd0-bus-width4-pins {
 		samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_bus8: sd0-bus-width8 {
+	sd0_bus8: sd0-bus-width8-pins {
 		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd4_clk: sd4-clk {
+	sd4_clk: sd4-clk-pins {
 		samsung,pins = "gpk0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd4_cmd: sd4-cmd {
+	sd4_cmd: sd4-cmd-pins {
 		samsung,pins = "gpk0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd4_cd: sd4-cd {
+	sd4_cd: sd4-cd-pins {
 		samsung,pins = "gpk0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd4_bus1: sd4-bus-width1 {
+	sd4_bus1: sd4-bus-width1-pins {
 		samsung,pins = "gpk0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd4_bus4: sd4-bus-width4 {
+	sd4_bus4: sd4-bus-width4-pins {
 		samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd4_bus8: sd4-bus-width8 {
+	sd4_bus8: sd4-bus-width8-pins {
 		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_clk: sd1-clk {
+	sd1_clk: sd1-clk-pins {
 		samsung,pins = "gpk1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_cmd: sd1-cmd {
+	sd1_cmd: sd1-cmd-pins {
 		samsung,pins = "gpk1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_cd: sd1-cd {
+	sd1_cd: sd1-cd-pins {
 		samsung,pins = "gpk1-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_bus1: sd1-bus-width1 {
+	sd1_bus1: sd1-bus-width1-pins {
 		samsung,pins = "gpk1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_bus4: sd1-bus-width4 {
+	sd1_bus4: sd1-bus-width4-pins {
 		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_clk: sd2-clk {
+	sd2_clk: sd2-clk-pins {
 		samsung,pins = "gpk2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_cmd: sd2-cmd {
+	sd2_cmd: sd2-cmd-pins {
 		samsung,pins = "gpk2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_cd: sd2-cd {
+	sd2_cd: sd2-cd-pins {
 		samsung,pins = "gpk2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_bus1: sd2-bus-width1 {
+	sd2_bus1: sd2-bus-width1-pins {
 		samsung,pins = "gpk2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_bus4: sd2-bus-width4 {
+	sd2_bus4: sd2-bus-width4-pins {
 		samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_bus8: sd2-bus-width8 {
+	sd2_bus8: sd2-bus-width8-pins {
 		samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_clk: sd3-clk {
+	sd3_clk: sd3-clk-pins {
 		samsung,pins = "gpk3-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_cmd: sd3-cmd {
+	sd3_cmd: sd3-cmd-pins {
 		samsung,pins = "gpk3-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_cd: sd3-cd {
+	sd3_cd: sd3-cd-pins {
 		samsung,pins = "gpk3-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_bus1: sd3-bus-width1 {
+	sd3_bus1: sd3-bus-width1-pins {
 		samsung,pins = "gpk3-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_bus4: sd3-bus-width4 {
+	sd3_bus4: sd3-bus-width4-pins {
 		samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	cam_port_b_io: cam-port-b-io {
+	cam_port_b_io: cam-port-b-io-pins {
 		samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
 				"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
 				"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
@@ -817,77 +817,77 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_port_b_clk_active: cam-port-b-clk-active {
+	cam_port_b_clk_active: cam-port-b-clk-active-pins {
 		samsung,pins = "gpm2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	cam_port_b_clk_idle: cam-port-b-clk-idle {
+	cam_port_b_clk_idle: cam-port-b-clk-idle-pins {
 		samsung,pins = "gpm2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	eint0: ext-int0 {
+	eint0: ext-int0-pins {
 		samsung,pins = "gpx0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	eint8: ext-int8 {
+	eint8: ext-int8-pins {
 		samsung,pins = "gpx1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	eint15: ext-int15 {
+	eint15: ext-int15-pins {
 		samsung,pins = "gpx1-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	eint16: ext-int16 {
+	eint16: ext-int16-pins {
 		samsung,pins = "gpx2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	eint31: ext-int31 {
+	eint31: ext-int31-pins {
 		samsung,pins = "gpx3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	fimc_is_i2c0: fimc-is-i2c0 {
+	fimc_is_i2c0: fimc-is-i2c0-pins {
 		samsung,pins = "gpm4-0", "gpm4-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	fimc_is_i2c1: fimc-is-i2c1 {
+	fimc_is_i2c1: fimc-is-i2c1-pins {
 		samsung,pins = "gpm4-2", "gpm4-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	fimc_is_uart: fimc-is-uart {
+	fimc_is_uart: fimc-is-uart-pins {
 		samsung,pins = "gpm3-5", "gpm3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	hdmi_cec: hdmi-cec {
+	hdmi_cec: hdmi-cec-pins {
 		samsung,pins = "gpx3-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -896,7 +896,7 @@
 };
 
 &pinctrl_2 {
-	gpz: gpz {
+	gpz: gpz-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -904,7 +904,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	i2s0_bus: i2s0-bus {
+	i2s0_bus: i2s0-bus-pins {
 		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
 				"gpz-4", "gpz-5", "gpz-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -912,7 +912,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pcm0_bus: pcm0-bus {
+	pcm0_bus: pcm0-bus-pins {
 		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
 				"gpz-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -922,7 +922,7 @@
 };
 
 &pinctrl_3 {
-	gpv0: gpv0 {
+	gpv0: gpv0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -930,7 +930,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpv1: gpv1 {
+	gpv1: gpv1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -938,7 +938,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpv2: gpv2 {
+	gpv2: gpv2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -946,7 +946,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpv3: gpv3 {
+	gpv3: gpv3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -954,7 +954,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpv4: gpv4 {
+	gpv4: gpv4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -962,7 +962,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	c2c_bus: c2c-bus {
+	c2c_bus: c2c-bus-pins {
 		samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
 				"gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
 				"gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts
index cc99b955af0c..a40ff394977c 100644
--- a/arch/arm/boot/dts/exynos4412-smdk4412.dts
+++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts
@@ -133,14 +133,14 @@
 };
 
 &pinctrl_1 {
-	keypad_rows: keypad-rows {
+	keypad_rows: keypad-rows-pins {
 		samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	keypad_cols: keypad-cols {
+	keypad_cols: keypad-cols-pins {
 		samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
 			       "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts b/arch/arm/boot/dts/exynos4412-tiny4412.dts
index 017b26108bb0..04388c575efe 100644
--- a/arch/arm/boot/dts/exynos4412-tiny4412.dts
+++ b/arch/arm/boot/dts/exynos4412-tiny4412.dts
@@ -11,6 +11,7 @@
 /dts-v1/;
 #include "exynos4412.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
 
 / {
 	model = "FriendlyARM TINY4412 board based on Exynos4412";
@@ -30,6 +31,7 @@
 
 		led1 {
 			label = "led1";
+			function = LED_FUNCTION_HEARTBEAT;
 			gpios = <&gpm4 0 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 			linux,default-trigger = "heartbeat";
@@ -49,6 +51,7 @@
 
 		led4 {
 			label = "led4";
+			function = LED_FUNCTION_DISK_ACTIVITY;
 			gpios = <&gpm4 3 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 			linux,default-trigger = "mmc0";
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index d3802046c8b8..aa0b61b59970 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -813,7 +813,7 @@
 	interrupt-parent = <&combiner>;
 	interrupts = <2 4>;
 	reg = <0x100C0000 0x100>;
-	clocks = <&clock 383>;
+	clocks = <&clock CLK_TMU_APBIF>;
 	clock-names = "tmu_apbif";
 	status = "disabled";
 };
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index 9ce9fb3fc190..c8da0d4b1b33 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -89,7 +89,7 @@
 			compatible = "arm,gic-400", "arm,cortex-a15-gic";
 			#interrupt-cells = <3>;
 			interrupt-controller;
-			reg =	<0x10481000 0x1000>,
+			reg = <0x10481000 0x1000>,
 				<0x10482000 0x2000>,
 				<0x10484000 0x2000>,
 				<0x10486000 0x2000>;
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 3583095fbb2a..71c0e87d3a1d 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -30,42 +30,42 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		menu {
+		key-menu {
 			label = "SW-TACT2";
 			gpios = <&gpx1 4 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_MENU>;
 			wakeup-source;
 		};
 
-		home {
+		key-home {
 			label = "SW-TACT3";
 			gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
 			wakeup-source;
 		};
 
-		up {
+		key-up {
 			label = "SW-TACT4";
 			gpios = <&gpx1 6 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_UP>;
 			wakeup-source;
 		};
 
-		down {
+		key-down {
 			label = "SW-TACT5";
 			gpios = <&gpx1 7 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_DOWN>;
 			wakeup-source;
 		};
 
-		back {
+		key-back {
 			label = "SW-TACT6";
 			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_BACK>;
 			wakeup-source;
 		};
 
-		wakeup {
+		key-wakeup {
 			label = "SW-TACT7";
 			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WAKEUP>;
@@ -590,7 +590,7 @@
 };
 
 &pinctrl_0 {
-	s5m8767_irq: s5m8767-irq {
+	s5m8767_irq: s5m8767-irq-pins {
 		samsung,pins = "gpx3-2";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
@@ -632,3 +632,8 @@
 		#size-cells = <0>;
 	};
 };
+
+&usbdrd {
+	vdd10-supply = <&ldo15_reg>;
+	vdd33-supply = <&ldo12_reg>;
+};
diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
index d31a68672bfa..48732edadff1 100644
--- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
@@ -9,10 +9,10 @@
  * tree nodes are listed in this file.
  */
 
-#include <dt-bindings/pinctrl/samsung.h>
+#include "exynos-pinctrl.h"
 
 &pinctrl_0 {
-	gpa0: gpa0 {
+	gpa0: gpa0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -20,7 +20,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpa1: gpa1 {
+	gpa1: gpa1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -28,7 +28,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpa2: gpa2 {
+	gpa2: gpa2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -36,7 +36,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb0: gpb0 {
+	gpb0: gpb0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -44,7 +44,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb1: gpb1 {
+	gpb1: gpb1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -52,7 +52,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb2: gpb2 {
+	gpb2: gpb2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -60,7 +60,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb3: gpb3 {
+	gpb3: gpb3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -68,7 +68,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc0: gpc0 {
+	gpc0: gpc0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -76,7 +76,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc1: gpc1 {
+	gpc1: gpc1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -84,7 +84,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc2: gpc2 {
+	gpc2: gpc2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -92,7 +92,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc3: gpc3 {
+	gpc3: gpc3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -100,7 +100,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd0: gpd0 {
+	gpd0: gpd0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -108,7 +108,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd1: gpd1 {
+	gpd1: gpd1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -116,42 +116,42 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpy0: gpy0 {
+	gpy0: gpy0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy1: gpy1 {
+	gpy1: gpy1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy2: gpy2 {
+	gpy2: gpy2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy3: gpy3 {
+	gpy3: gpy3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy4: gpy4 {
+	gpy4: gpy4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy5: gpy5 {
+	gpy5: gpy5-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy6: gpy6 {
+	gpy6: gpy6-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpc4: gpc4 {
+	gpc4: gpc4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -159,7 +159,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx0: gpx0 {
+	gpx0: gpx0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -170,7 +170,7 @@
 			     <26 0>, <26 1>, <27 0>, <27 1>;
 	};
 
-	gpx1: gpx1 {
+	gpx1: gpx1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -181,7 +181,7 @@
 			     <30 0>, <30 1>, <31 0>, <31 1>;
 	};
 
-	gpx2: gpx2 {
+	gpx2: gpx2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -189,7 +189,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx3: gpx3 {
+	gpx3: gpx3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -197,104 +197,104 @@
 		#interrupt-cells = <2>;
 	};
 
-	uart0_data: uart0-data {
+	uart0_data: uart0-data-pins {
 		samsung,pins = "gpa0-0", "gpa0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart0_fctl: uart0-fctl {
+	uart0_fctl: uart0-fctl-pins {
 		samsung,pins = "gpa0-2", "gpa0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c2_bus: i2c2-bus {
+	i2c2_bus: i2c2-bus-pins {
 		samsung,pins = "gpa0-6", "gpa0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c2_hs_bus: i2c2-hs-bus {
+	i2c2_hs_bus: i2c2-hs-bus-pins {
 		samsung,pins = "gpa0-6", "gpa0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c2_gpio_bus: i2c2-gpio-bus {
+	i2c2_gpio_bus: i2c2-gpio-bus-pins {
 		samsung,pins = "gpa0-6", "gpa0-7";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart2_data: uart2-data {
+	uart2_data: uart2-data-pins {
 		samsung,pins = "gpa1-0", "gpa1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart2_fctl: uart2-fctl {
+	uart2_fctl: uart2-fctl-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c3_bus: i2c3-bus {
+	i2c3_bus: i2c3-bus-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c3_hs_bus: i2c3-hs-bus {
+	i2c3_hs_bus: i2c3-hs-bus-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart3_data: uart3-data {
-		samsung,pins = "gpa1-4", "gpa1-4";
+	uart3_data: uart3-data-pins {
+		samsung,pins = "gpa1-4", "gpa1-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spi0_bus: spi0-bus {
+	spi0_bus: spi0-bus-pins {
 		samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c4_bus: i2c4-bus {
+	i2c4_bus: i2c4-bus-pins {
 		samsung,pins = "gpa2-0", "gpa2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c5_bus: i2c5-bus {
+	i2c5_bus: i2c5-bus-pins {
 		samsung,pins = "gpa2-2", "gpa2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spi1_bus: spi1-bus {
+	spi1_bus: spi1-bus-pins {
 		samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2s1_bus: i2s1-bus {
+	i2s1_bus: i2s1-bus-pins {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
 			       "gpb0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -302,7 +302,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pcm1_bus: pcm1-bus {
+	pcm1_bus: pcm1-bus-pins {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
 			       "gpb0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -310,7 +310,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	ac97_bus: ac97-bus {
+	ac97_bus: ac97-bus-pins {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
 			       "gpb0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
@@ -318,7 +318,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2s2_bus: i2s2-bus {
+	i2s2_bus: i2s2-bus-pins {
 		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
 			       "gpb1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -326,7 +326,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pcm2_bus: pcm2-bus {
+	pcm2_bus: pcm2-bus-pins {
 		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
 			       "gpb1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -334,280 +334,280 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spdif_bus: spdif-bus {
+	spdif_bus: spdif-bus-pins {
 		samsung,pins = "gpb1-0", "gpb1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spi2_bus: spi2-bus {
+	spi2_bus: spi2-bus-pins {
 		samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c6_bus: i2c6-bus {
+	i2c6_bus: i2c6-bus-pins {
 		samsung,pins = "gpb1-3", "gpb1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm0_out: pwm0-out {
+	pwm0_out: pwm0-out-pins {
 		samsung,pins = "gpb2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm1_out: pwm1-out {
+	pwm1_out: pwm1-out-pins {
 		samsung,pins = "gpb2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm2_out: pwm2-out {
+	pwm2_out: pwm2-out-pins {
 		samsung,pins = "gpb2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm3_out: pwm3-out {
+	pwm3_out: pwm3-out-pins {
 		samsung,pins = "gpb2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c7_bus: i2c7-bus {
+	i2c7_bus: i2c7-bus-pins {
 		samsung,pins = "gpb2-2", "gpb2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c0_bus: i2c0-bus {
+	i2c0_bus: i2c0-bus-pins {
 		samsung,pins = "gpb3-0", "gpb3-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c1_bus: i2c1-bus {
+	i2c1_bus: i2c1-bus-pins {
 		samsung,pins = "gpb3-2", "gpb3-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c0_hs_bus: i2c0-hs-bus {
+	i2c0_hs_bus: i2c0-hs-bus-pins {
 		samsung,pins = "gpb3-0", "gpb3-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c1_hs_bus: i2c1-hs-bus {
+	i2c1_hs_bus: i2c1-hs-bus-pins {
 		samsung,pins = "gpb3-2", "gpb3-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	sd0_clk: sd0-clk {
+	sd0_clk: sd0-clk-pins {
 		samsung,pins = "gpc0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_cmd: sd0-cmd {
+	sd0_cmd: sd0-cmd-pins {
 		samsung,pins = "gpc0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_cd: sd0-cd {
+	sd0_cd: sd0-cd-pins {
 		samsung,pins = "gpc0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_bus1: sd0-bus-width1 {
+	sd0_bus1: sd0-bus-width1-pins {
 		samsung,pins = "gpc0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_bus4: sd0-bus-width4 {
+	sd0_bus4: sd0-bus-width4-pins {
 		samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5", "gpc0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_bus8: sd0-bus-width8 {
+	sd0_bus8: sd0-bus-width8-pins {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_clk: sd1-clk {
+	sd1_clk: sd1-clk-pins {
 		samsung,pins = "gpc2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_cmd: sd1-cmd {
+	sd1_cmd: sd1-cmd-pins {
 		samsung,pins = "gpc2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_cd: sd1-cd {
+	sd1_cd: sd1-cd-pins {
 		samsung,pins = "gpc2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_bus1: sd1-bus-width1 {
+	sd1_bus1: sd1-bus-width1-pins {
 		samsung,pins = "gpc2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_bus4: sd1-bus-width4 {
+	sd1_bus4: sd1-bus-width4-pins {
 		samsung,pins = "gpc2-3", "gpc2-4", "gpc2-5", "gpc2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_clk: sd2-clk {
+	sd2_clk: sd2-clk-pins {
 		samsung,pins = "gpc3-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_cmd: sd2-cmd {
+	sd2_cmd: sd2-cmd-pins {
 		samsung,pins = "gpc3-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_cd: sd2-cd {
+	sd2_cd: sd2-cd-pins {
 		samsung,pins = "gpc3-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_bus1: sd2-bus-width1 {
+	sd2_bus1: sd2-bus-width1-pins {
 		samsung,pins = "gpc3-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_bus4: sd2-bus-width4 {
+	sd2_bus4: sd2-bus-width4-pins {
 		samsung,pins = "gpc3-3", "gpc3-4", "gpc3-5", "gpc3-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_bus8: sd2-bus-width8 {
+	sd2_bus8: sd2-bus-width8-pins {
 		samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_clk: sd3-clk {
+	sd3_clk: sd3-clk-pins {
 		samsung,pins = "gpc4-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_cmd: sd3-cmd {
+	sd3_cmd: sd3-cmd-pins {
 		samsung,pins = "gpc4-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_cd: sd3-cd {
+	sd3_cd: sd3-cd-pins {
 		samsung,pins = "gpc4-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_bus1: sd3-bus-width1 {
+	sd3_bus1: sd3-bus-width1-pins {
 		samsung,pins = "gpc4-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_bus4: sd3-bus-width4 {
+	sd3_bus4: sd3-bus-width4-pins {
 		samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	uart1_data: uart1-data {
+	uart1_data: uart1-data-pins {
 		samsung,pins = "gpd0-0", "gpd0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart1_fctl: uart1-fctl {
+	uart1_fctl: uart1-fctl-pins {
 		samsung,pins = "gpd0-2", "gpd0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	dp_hpd: dp_hpd {
+	dp_hpd: dp-hpd-pins {
 		samsung,pins = "gpx0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	hdmi_cec: hdmi-cec {
+	hdmi_cec: hdmi-cec-pins {
 		samsung,pins = "gpx3-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	hdmi_hpd: hdmi-hpd {
+	hdmi_hpd: hdmi-hpd-pins {
 		samsung,pins = "gpx3-7";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 };
 
 &pinctrl_1 {
-	gpe0: gpe0 {
+	gpe0: gpe0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -615,7 +615,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpe1: gpe1 {
+	gpe1: gpe1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -623,7 +623,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf0: gpf0 {
+	gpf0: gpf0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -631,7 +631,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf1: gpf1 {
+	gpf1: gpf1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -639,7 +639,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg0: gpg0 {
+	gpg0: gpg0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -647,7 +647,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg1: gpg1 {
+	gpg1: gpg1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -655,7 +655,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg2: gpg2 {
+	gpg2: gpg2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -663,7 +663,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gph0: gph0 {
+	gph0: gph0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -671,7 +671,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gph1: gph1 {
+	gph1: gph1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -679,7 +679,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	cam_gpio_a: cam-gpio-a {
+	cam_gpio_a: cam-gpio-a-pins {
 		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
 			       "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
 			       "gpe1-0", "gpe1-1";
@@ -688,7 +688,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_gpio_b: cam-gpio-b {
+	cam_gpio_b: cam-gpio-b-pins {
 		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
 			       "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -696,42 +696,42 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_i2c2_bus: cam-i2c2-bus {
+	cam_i2c2_bus: cam-i2c2-bus-pins {
 		samsung,pins = "gpe0-6", "gpe1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_spi1_bus: cam-spi1-bus {
+	cam_spi1_bus: cam-spi1-bus-pins {
 		samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_i2c1_bus: cam-i2c1-bus {
+	cam_i2c1_bus: cam-i2c1-bus-pins {
 		samsung,pins = "gpf0-2", "gpf0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_i2c0_bus: cam-i2c0-bus {
+	cam_i2c0_bus: cam-i2c0-bus-pins {
 		samsung,pins = "gpf0-0", "gpf0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_spi0_bus: cam-spi0-bus {
+	cam_spi0_bus: cam-spi0-bus-pins {
 		samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_bayrgb_bus: cam-bayrgb-bus {
+	cam_bayrgb_bus: cam-bayrgb-bus-pins {
 		samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3",
 			       "gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7",
 			       "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
@@ -742,7 +742,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_port_a: cam-port-a {
+	cam_port_a: cam-port-a-pins {
 		samsung,pins = "gph0-0", "gph0-1", "gph0-2", "gph0-3",
 			       "gph1-0", "gph1-1", "gph1-2", "gph1-3",
 			       "gph1-4", "gph1-5", "gph1-6", "gph1-7";
@@ -753,7 +753,7 @@
 };
 
 &pinctrl_2 {
-	gpv0: gpv0 {
+	gpv0: gpv0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -761,7 +761,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpv1: gpv1 {
+	gpv1: gpv1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -769,7 +769,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpv2: gpv2 {
+	gpv2: gpv2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -777,7 +777,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpv3: gpv3 {
+	gpv3: gpv3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -785,7 +785,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpv4: gpv4 {
+	gpv4: gpv4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -793,7 +793,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	c2c_rxd: c2c-rxd {
+	c2c_rxd: c2c-rxd-pins {
 		samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
 			       "gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
 			       "gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
@@ -803,7 +803,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	c2c_txd: c2c-txd {
+	c2c_txd: c2c-txd-pins {
 		samsung,pins = "gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3",
 			       "gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7",
 			       "gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
@@ -815,7 +815,7 @@
 };
 
 &pinctrl_3 {
-	gpz: gpz {
+	gpz: gpz-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -823,7 +823,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	i2s0_bus: i2s0-bus {
+	i2s0_bus: i2s0-bus-pins {
 		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
 				"gpz-4", "gpz-5", "gpz-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 39bbe18145cf..71293749ac48 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -118,6 +118,9 @@
 	status = "okay";
 	ddc = <&i2c_2>;
 	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	vdd-supply = <&ldo8_reg>;
+	vdd_osc-supply = <&ldo10_reg>;
+	vdd_pll-supply = <&ldo8_reg>;
 };
 
 &i2c_0 {
@@ -126,7 +129,7 @@
 	samsung,i2c-max-bus-freq = <20000>;
 
 	eeprom@50 {
-		compatible = "samsung,s524ad0xd1";
+		compatible = "samsung,s524ad0xd1", "atmel,24c128";
 		reg = <0x50>;
 	};
 
@@ -286,7 +289,7 @@
 	samsung,i2c-max-bus-freq = <20000>;
 
 	eeprom@51 {
-		compatible = "samsung,s524ad0xd1";
+		compatible = "samsung,s524ad0xd1", "atmel,24c128";
 		reg = <0x51>;
 	};
 
@@ -410,10 +413,15 @@
 };
 
 &pinctrl_0 {
-	max77686_irq: max77686-irq {
+	max77686_irq: max77686-irq-pins {
 		samsung,pins = "gpx3-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
+
+&usbdrd {
+	vdd10-supply = <&ldo15_reg>;
+	vdd33-supply = <&ldo12_reg>;
+};
diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
index 2335c4687349..3d84b9c6dea3 100644
--- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
@@ -32,7 +32,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&power_key_irq &lid_irq>;
 
-		power {
+		power-key {
 			label = "Power";
 			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
@@ -587,63 +587,63 @@
 };
 
 &pinctrl_0 {
-	wifi_en: wifi-en {
+	wifi_en: wifi-en-pins {
 		samsung,pins = "gpx0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	wifi_rst: wifi-rst {
+	wifi_rst: wifi-rst-pins {
 		samsung,pins = "gpx0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	power_key_irq: power-key-irq {
+	power_key_irq: power-key-irq-pins {
 		samsung,pins = "gpx1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	ec_irq: ec-irq {
+	ec_irq: ec-irq-pins {
 		samsung,pins = "gpx1-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	tps65090_irq: tps65090-irq {
+	tps65090_irq: tps65090-irq-pins {
 		samsung,pins = "gpx2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	usb3_vbus_en: usb3-vbus-en {
+	usb3_vbus_en: usb3-vbus-en-pins {
 		samsung,pins = "gpx2-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	max77686_irq: max77686-irq {
+	max77686_irq: max77686-irq-pins {
 		samsung,pins = "gpx3-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lid_irq: lid-irq {
+	lid_irq: lid-irq-pins {
 		samsung,pins = "gpx3-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	hdmi_hpd_irq: hdmi-hpd-irq {
+	hdmi_hpd_irq: hdmi-hpd-irq-pins {
 		samsung,pins = "gpx3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
@@ -652,14 +652,14 @@
 };
 
 &pinctrl_1 {
-	arb_their_claim: arb-their-claim {
+	arb_their_claim: arb-their-claim-pins {
 		samsung,pins = "gpe0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	arb_our_claim: arb-our-claim {
+	arb_our_claim: arb-our-claim-pins {
 		samsung,pins = "gpf0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -698,6 +698,11 @@
 	cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>;
 };
 
+&usbdrd {
+	vdd10-supply = <&ldo15_reg>;
+	vdd33-supply = <&ldo12_reg>;
+};
+
 &usbdrd_dwc3 {
 	dr_mode = "host";
 };
diff --git a/arch/arm/boot/dts/exynos5250-snow-rev5.dts b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
index f8ca61df6981..0a47597d6f0d 100644
--- a/arch/arm/boot/dts/exynos5250-snow-rev5.dts
+++ b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
@@ -47,7 +47,7 @@
 };
 
 &pinctrl_0 {
-	max98090_irq: max98090-irq {
+	max98090_irq: max98090-irq-pins {
 		samsung,pins = "gpx0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index a630bc654a49..906aa7aae710 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -43,7 +43,7 @@
 };
 
 &pinctrl_0 {
-	max98095_en: max98095-en {
+	max98095_en: max98095-en-pins {
 		samsung,pins = "gpx1-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
index e0feedcf54bb..5eca10ecd550 100644
--- a/arch/arm/boot/dts/exynos5250-spring.dts
+++ b/arch/arm/boot/dts/exynos5250-spring.dts
@@ -33,7 +33,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&power_key_irq>, <&lid_irq>;
 
-		power {
+		power-key {
 			label = "Power";
 			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
@@ -451,63 +451,63 @@
 };
 
 &pinctrl_0 {
-	s5m8767_dvs: s5m8767-dvs {
+	s5m8767_dvs: s5m8767-dvs-pins {
 		samsung,pins = "gpd1-0", "gpd1-1", "gpd1-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	dp_hpd_gpio: dp-hpd {
+	dp_hpd_gpio: dp-hpd-pins {
 		samsung,pins = "gpc3-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	trackpad_irq: trackpad-irq {
+	trackpad_irq: trackpad-irq-pins {
 		samsung,pins = "gpx1-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	power_key_irq: power-key-irq {
+	power_key_irq: power-key-irq-pins {
 		samsung,pins = "gpx1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	ec_irq: ec-irq {
+	ec_irq: ec-irq-pins {
 		samsung,pins = "gpx1-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	s5m8767_ds: s5m8767-ds {
+	s5m8767_ds: s5m8767-ds-pins {
 		samsung,pins = "gpx2-3", "gpx2-4", "gpx2-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	s5m8767_irq: s5m8767-irq {
+	s5m8767_irq: s5m8767-irq-pins {
 		samsung,pins = "gpx3-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lid_irq: lid-irq {
+	lid_irq: lid-irq-pins {
 		samsung,pins = "gpx3-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	hdmi_hpd_irq: hdmi-hpd-irq {
+	hdmi_hpd_irq: hdmi-hpd-irq-pins {
 		samsung,pins = "gpx3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
@@ -516,7 +516,7 @@
 };
 
 &pinctrl_1 {
-	hsic_reset: hsic-reset {
+	hsic_reset: hsic-reset-pins {
 		samsung,pins = "gpe1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -553,4 +553,9 @@
 	num-cs = <1>;
 };
 
+&usbdrd {
+	vdd10-supply = <&ldo15_reg>;
+	vdd33-supply = <&ldo12_reg>;
+};
+
 #include "cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 139778928b93..4708dcd575a7 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -245,7 +245,8 @@
 		};
 
 		timer@101c0000 {
-			compatible = "samsung,exynos4210-mct";
+			compatible = "samsung,exynos5250-mct",
+				     "samsung,exynos4210-mct";
 			reg = <0x101C0000 0x800>;
 			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
 			clock-names = "fin_pll", "mct";
@@ -496,8 +497,7 @@
 			status = "disabled";
 			reg = <0x12d20000 0x100>;
 			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&pdma0 5
-				&pdma0 4>;
+			dmas = <&pdma0 5>, <&pdma0 4>;
 			dma-names = "tx", "rx";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -512,8 +512,7 @@
 			status = "disabled";
 			reg = <0x12d30000 0x100>;
 			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&pdma1 5
-				&pdma1 4>;
+			dmas = <&pdma1 5>, <&pdma1 4>;
 			dma-names = "tx", "rx";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -528,8 +527,7 @@
 			status = "disabled";
 			reg = <0x12d40000 0x100>;
 			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&pdma0 7
-				&pdma0 6>;
+			dmas = <&pdma0 7>, <&pdma0 6>;
 			dma-names = "tx", "rx";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -637,7 +635,7 @@
 			#sound-dai-cells = <1>;
 		};
 
-		usb_dwc3 {
+		usbdrd: usb3 {
 			compatible = "samsung,exynos5250-dwusb3";
 			clocks = <&clock CLK_USB3>;
 			clock-names = "usbdrd30";
@@ -695,48 +693,40 @@
 			samsung,pmureg-phandle = <&pmu_system_controller>;
 		};
 
-		pdma0: pdma@121a0000 {
+		pdma0: dma-controller@121a0000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x121A0000 0x1000>;
 			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_PDMA0>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
 		};
 
-		pdma1: pdma@121b0000 {
+		pdma1: dma-controller@121b0000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x121B0000 0x1000>;
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_PDMA1>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
 		};
 
-		mdma0: mdma@10800000 {
+		mdma0: dma-controller@10800000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x10800000 0x1000>;
 			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_MDMA0>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <1>;
 		};
 
-		mdma1: mdma@11c10000 {
+		mdma1: dma-controller@11c10000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x11C10000 0x1000>;
 			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_MDMA1>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <1>;
 		};
 
 		gsc_0: gsc@13e00000 {
@@ -820,15 +810,14 @@
 			status = "disabled";
 		};
 
-		dp_phy: video-phy {
+		dp_phy: video-phy-0 {
 			compatible = "samsung,exynos5250-dp-video-phy";
 			samsung,pmu-syscon = <&pmu_system_controller>;
 			#phy-cells = <0>;
 		};
 
-		mipi_phy: video-phy@10040710 {
+		mipi_phy: video-phy-1 {
 			compatible = "samsung,s5pv210-mipi-video-phy";
-			reg = <0x10040710 0x100>;
 			#phy-cells = <1>;
 			syscon = <&pmu_system_controller>;
 		};
diff --git a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
index 17e2f3e0d71e..43e4a541f479 100644
--- a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
@@ -9,10 +9,10 @@
  * tree nodes are listed in this file.
  */
 
-#include <dt-bindings/pinctrl/samsung.h>
+#include "exynos-pinctrl.h"
 
 &pinctrl_0 {
-	gpa0: gpa0 {
+	gpa0: gpa0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -20,7 +20,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpa1: gpa1 {
+	gpa1: gpa1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -28,7 +28,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpa2: gpa2 {
+	gpa2: gpa2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -36,7 +36,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb0: gpb0 {
+	gpb0: gpb0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -44,7 +44,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb1: gpb1 {
+	gpb1: gpb1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -52,7 +52,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb2: gpb2 {
+	gpb2: gpb2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -60,7 +60,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb3: gpb3 {
+	gpb3: gpb3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -68,7 +68,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb4: gpb4 {
+	gpb4: gpb4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -76,7 +76,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb5: gpb5 {
+	gpb5: gpb5-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -84,7 +84,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd0: gpd0 {
+	gpd0: gpd0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -92,7 +92,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd1: gpd1 {
+	gpd1: gpd1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -100,7 +100,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd2: gpd2 {
+	gpd2: gpd2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -108,7 +108,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpe0: gpe0 {
+	gpe0: gpe0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -116,7 +116,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpe1: gpe1 {
+	gpe1: gpe1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -124,7 +124,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf0: gpf0 {
+	gpf0: gpf0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -132,7 +132,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf1: gpf1 {
+	gpf1: gpf1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -140,7 +140,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk0: gpk0 {
+	gpk0: gpk0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -148,7 +148,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx0: gpx0 {
+	gpx0: gpx0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -164,7 +164,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx1: gpx1 {
+	gpx1: gpx1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -180,7 +180,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx2: gpx2 {
+	gpx2: gpx2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -188,7 +188,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx3: gpx3 {
+	gpx3: gpx3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -196,63 +196,63 @@
 		#interrupt-cells = <2>;
 	};
 
-	uart0_data: uart0-data {
+	uart0_data: uart0-data-pins {
 		samsung,pins = "gpa0-0", "gpa0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	uart0_fctl: uart0-fctl {
+	uart0_fctl: uart0-fctl-pins {
 		samsung,pins = "gpa0-2", "gpa0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	uart1_data: uart1-data {
+	uart1_data: uart1-data-pins {
 		samsung,pins = "gpa1-0", "gpa1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	uart1_fctl: uart1-fctl {
+	uart1_fctl: uart1-fctl-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	uart2_data: uart2-data {
+	uart2_data: uart2-data-pins {
 		samsung,pins = "gpa1-4", "gpa1-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	spi0_bus: spi0-bus {
+	spi0_bus: spi0-bus-pins {
 		samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	spi1_bus: spi1-bus {
+	spi1_bus: spi1-bus-pins {
 		samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	usb3_vbus0_en: usb3-vbus0-en {
+	usb3_vbus0_en: usb3-vbus0-en-pins {
 		samsung,pins = "gpa2-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2s1_bus: i2s1-bus {
+	i2s1_bus: i2s1-bus-pins {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
 				"gpb0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -260,7 +260,7 @@
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	pcm1_bus: pcm1-bus {
+	pcm1_bus: pcm1-bus-pins {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
 				"gpb0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -268,105 +268,105 @@
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	spdif1_bus: spdif1-bus {
+	spdif1_bus: spdif1-bus-pins {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	spi2_bus: spi2-bus {
+	spi2_bus: spi2-bus-pins {
 		samsung,pins = "gpb1-0", "gpb1-2", "gpb1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c0_hs_bus: i2c0-hs-bus {
+	i2c0_hs_bus: i2c0-hs-bus-pins {
 		samsung,pins = "gpb3-0", "gpb3-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c1_hs_bus: i2c1-hs-bus {
+	i2c1_hs_bus: i2c1-hs-bus-pins {
 		samsung,pins = "gpb3-2", "gpb3-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c2_hs_bus: i2c2-hs-bus {
+	i2c2_hs_bus: i2c2-hs-bus-pins {
 		samsung,pins = "gpb3-4", "gpb3-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c3_hs_bus: i2c3-hs-bus {
+	i2c3_hs_bus: i2c3-hs-bus-pins {
 		samsung,pins = "gpb3-6", "gpb3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c4_bus: i2c4-bus {
+	i2c4_bus: i2c4-bus-pins {
 		samsung,pins = "gpb4-0", "gpb4-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c5_bus: i2c5-bus {
+	i2c5_bus: i2c5-bus-pins {
 		samsung,pins = "gpb4-2", "gpb4-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c6_bus: i2c6-bus {
+	i2c6_bus: i2c6-bus-pins {
 		samsung,pins = "gpb4-4", "gpb4-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c7_bus: i2c7-bus {
+	i2c7_bus: i2c7-bus-pins {
 		samsung,pins = "gpb4-6", "gpb4-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c8_bus: i2c8-bus {
+	i2c8_bus: i2c8-bus-pins {
 		samsung,pins = "gpb5-0", "gpb5-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c9_bus: i2c9-bus {
+	i2c9_bus: i2c9-bus-pins {
 		samsung,pins = "gpb5-2", "gpb5-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c10_bus: i2c10-bus {
+	i2c10_bus: i2c10-bus-pins {
 		samsung,pins = "gpb5-4", "gpb5-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c11_bus: i2c11-bus {
+	i2c11_bus: i2c11-bus-pins {
 		samsung,pins = "gpb5-6", "gpb5-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	cam_gpio_a: cam-gpio-a {
+	cam_gpio_a: cam-gpio-a-pins {
 		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
 			"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
 			"gpe1-0", "gpe1-1";
@@ -375,7 +375,7 @@
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	cam_gpio_b: cam-gpio-b {
+	cam_gpio_b: cam-gpio-b-pins {
 		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
 			"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -383,28 +383,28 @@
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	cam_i2c1_bus: cam-i2c1-bus {
+	cam_i2c1_bus: cam-i2c1-bus-pins {
 		samsung,pins = "gpf0-2", "gpf0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	cam_i2c0_bus: cam-i2c0-bus {
+	cam_i2c0_bus: cam-i2c0-bus-pins {
 		samsung,pins = "gpf0-0", "gpf0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	cam_spi0_bus: cam-spi0-bus {
+	cam_spi0_bus: cam-spi0-bus-pins {
 		samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	cam_spi1_bus: cam-spi1-bus {
+	cam_spi1_bus: cam-spi1-bus-pins {
 		samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -413,7 +413,7 @@
 };
 
 &pinctrl_1 {
-	gpc0: gpc0 {
+	gpc0: gpc0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -421,7 +421,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc1: gpc1 {
+	gpc1: gpc1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -429,7 +429,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc2: gpc2 {
+	gpc2: gpc2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -437,7 +437,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc3: gpc3 {
+	gpc3: gpc3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -445,7 +445,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc4: gpc4 {
+	gpc4: gpc4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -453,112 +453,112 @@
 		#interrupt-cells = <2>;
 	};
 
-	sd0_clk: sd0-clk {
+	sd0_clk: sd0-clk-pins {
 		samsung,pins = "gpc0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd0_cmd: sd0-cmd {
+	sd0_cmd: sd0-cmd-pins {
 		samsung,pins = "gpc0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd0_bus1: sd0-bus-width1 {
+	sd0_bus1: sd0-bus-width1-pins {
 		samsung,pins = "gpc0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd0_bus4: sd0-bus-width4 {
+	sd0_bus4: sd0-bus-width4-pins {
 		samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd0_bus8: sd0-bus-width8 {
+	sd0_bus8: sd0-bus-width8-pins {
 		samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd0_rdqs: sd0-rdqs {
+	sd0_rdqs: sd0-rdqs-pins {
 		samsung,pins = "gpc0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd1_clk: sd1-clk {
+	sd1_clk: sd1-clk-pins {
 		samsung,pins = "gpc1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd1_cmd: sd1-cmd {
+	sd1_cmd: sd1-cmd-pins {
 		samsung,pins = "gpc1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd1_bus1: sd1-bus-width1 {
+	sd1_bus1: sd1-bus-width1-pins {
 		samsung,pins = "gpc1-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd1_bus4: sd1-bus-width4 {
+	sd1_bus4: sd1-bus-width4-pins {
 		samsung,pins = "gpc1-3", "gpc1-4", "gpc1-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd1_bus8: sd1-bus-width8 {
+	sd1_bus8: sd1-bus-width8-pins {
 		samsung,pins = "gpc4-0", "gpc4-1", "gpc4-2", "gpc4-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd2_clk: sd2-clk {
+	sd2_clk: sd2-clk-pins {
 		samsung,pins = "gpc2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd2_cmd: sd2-cmd {
+	sd2_cmd: sd2-cmd-pins {
 		samsung,pins = "gpc2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd2_cd: sd2-cd {
+	sd2_cd: sd2-cd-pins {
 		samsung,pins = "gpc2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd2_bus1: sd2-bus-width1 {
+	sd2_bus1: sd2-bus-width1-pins {
 		samsung,pins = "gpc2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd2_bus4: sd2-bus-width4 {
+	sd2_bus4: sd2-bus-width4-pins {
 		samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -567,7 +567,7 @@
 };
 
 &pinctrl_2 {
-	gpz0: gpz0 {
+	gpz0: gpz0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -575,7 +575,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpz1: gpz1 {
+	gpz1: gpz1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
diff --git a/arch/arm/boot/dts/exynos5260-xyref5260.dts b/arch/arm/boot/dts/exynos5260-xyref5260.dts
index 0dc2ec16aa0a..3c3b751d4360 100644
--- a/arch/arm/boot/dts/exynos5260-xyref5260.dts
+++ b/arch/arm/boot/dts/exynos5260-xyref5260.dts
@@ -29,6 +29,27 @@
 		#clock-cells = <0>;
 	};
 
+	ioclk_pcm: clock-pcm-ext {
+		compatible = "fixed-clock";
+		clock-frequency = <2048000>;
+		clock-output-names = "ioclk_pcm_extclk";
+		#clock-cells = <0>;
+	};
+
+	ioclk_i2s: clock-i2s-cd {
+		compatible = "fixed-clock";
+		clock-frequency = <147456000>;
+		clock-output-names = "ioclk_i2s_cdclk";
+		#clock-cells = <0>;
+	};
+
+	ioclk_spdif: clock-spdif-ext {
+		compatible = "fixed-clock";
+		clock-frequency = <49152000>;
+		clock-output-names = "ioclk_spdif_extclk";
+		#clock-cells = <0>;
+	};
+
 	xrtcxti: xrtcxti {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
@@ -38,7 +59,7 @@
 };
 
 &pinctrl_0 {
-	hdmi_hpd_irq: hdmi-hpd-irq {
+	hdmi_hpd_irq: hdmi-hpd-irq-pins {
 		samsung,pins = "gpx3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi
index 524d244050e0..ff1ee409eff3 100644
--- a/arch/arm/boot/dts/exynos5260.dtsi
+++ b/arch/arm/boot/dts/exynos5260.dtsi
@@ -113,78 +113,206 @@
 			compatible = "samsung,exynos5260-clock-top";
 			reg = <0x10010000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&clock_mif MIF_DOUT_MEM_PLL>,
+				 <&clock_mif MIF_DOUT_BUS_PLL>,
+				 <&clock_mif MIF_DOUT_MEDIA_PLL>;
+			clock-names = "fin_pll",
+				      "dout_mem_pll",
+				      "dout_bus_pll",
+				      "dout_media_pll";
 		};
 
 		clock_peri: clock-controller@10200000 {
 			compatible = "samsung,exynos5260-clock-peri";
 			reg = <0x10200000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&ioclk_pcm>,
+				 <&ioclk_i2s>,
+				 <&ioclk_spdif>,
+				 <&fin_pll>,
+				 <&clock_top TOP_DOUT_ACLK_PERI_66>,
+				 <&clock_top TOP_DOUT_SCLK_PERI_UART0>,
+				 <&clock_top TOP_DOUT_SCLK_PERI_UART1>,
+				 <&clock_top TOP_DOUT_SCLK_PERI_UART2>,
+				 <&clock_top TOP_DOUT_SCLK_PERI_SPI0_B>,
+				 <&clock_top TOP_DOUT_SCLK_PERI_SPI1_B>,
+				 <&clock_top TOP_DOUT_SCLK_PERI_SPI2_B>,
+				 <&clock_top TOP_DOUT_ACLK_PERI_AUD>;
+			clock-names = "fin_pll",
+				      "ioclk_pcm_extclk",
+				      "ioclk_i2s_cdclk",
+				      "ioclk_spdif_extclk",
+				      "phyclk_hdmi_phy_ref_cko",
+				      "dout_aclk_peri_66",
+				      "dout_sclk_peri_uart0",
+				      "dout_sclk_peri_uart1",
+				      "dout_sclk_peri_uart2",
+				      "dout_sclk_peri_spi0_b",
+				      "dout_sclk_peri_spi1_b",
+				      "dout_sclk_peri_spi2_b",
+				      "dout_aclk_peri_aud";
 		};
 
 		clock_egl: clock-controller@10600000 {
 			compatible = "samsung,exynos5260-clock-egl";
 			reg = <0x10600000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&clock_mif MIF_DOUT_BUS_PLL>;
+			clock-names = "fin_pll",
+				      "dout_bus_pll";
 		};
 
 		clock_kfc: clock-controller@10700000 {
 			compatible = "samsung,exynos5260-clock-kfc";
 			reg = <0x10700000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&clock_mif MIF_DOUT_MEDIA_PLL>;
+			clock-names = "fin_pll",
+				      "dout_media_pll";
 		};
 
 		clock_g2d: clock-controller@10a00000 {
 			compatible = "samsung,exynos5260-clock-g2d";
 			reg = <0x10A00000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&clock_top TOP_DOUT_ACLK_G2D_333>;
+			clock-names = "fin_pll",
+				      "dout_aclk_g2d_333";
 		};
 
 		clock_mif: clock-controller@10ce0000 {
 			compatible = "samsung,exynos5260-clock-mif";
 			reg = <0x10CE0000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>;
+			clock-names = "fin_pll";
 		};
 
 		clock_mfc: clock-controller@11090000 {
 			compatible = "samsung,exynos5260-clock-mfc";
 			reg = <0x11090000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&clock_top TOP_DOUT_ACLK_MFC_333>;
+			clock-names = "fin_pll",
+				      "dout_aclk_mfc_333";
 		};
 
 		clock_g3d: clock-controller@11830000 {
 			compatible = "samsung,exynos5260-clock-g3d";
 			reg = <0x11830000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>;
+			clock-names = "fin_pll";
 		};
 
 		clock_fsys: clock-controller@122e0000 {
 			compatible = "samsung,exynos5260-clock-fsys";
 			reg = <0x122E0000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&clock_top TOP_DOUT_ACLK_FSYS_200>;
+			clock-names = "fin_pll",
+				      "phyclk_usbhost20_phy_phyclock",
+				      "phyclk_usbhost20_phy_freeclk",
+				      "phyclk_usbhost20_phy_clk48mohci",
+				      "phyclk_usbdrd30_udrd30_pipe_pclk",
+				      "phyclk_usbdrd30_udrd30_phyclock",
+				      "dout_aclk_fsys_200";
 		};
 
 		clock_aud: clock-controller@128c0000 {
 			compatible = "samsung,exynos5260-clock-aud";
 			reg = <0x128C0000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&clock_top TOP_FOUT_AUD_PLL>,
+				 <&ioclk_i2s>,
+				 <&ioclk_pcm>;
+			clock-names = "fin_pll",
+				      "fout_aud_pll",
+				      "ioclk_i2s_cdclk",
+				      "ioclk_pcm_extclk";
 		};
 
 		clock_isp: clock-controller@133c0000 {
 			compatible = "samsung,exynos5260-clock-isp";
 			reg = <0x133C0000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&clock_top TOP_DOUT_ACLK_ISP1_266>,
+				 <&clock_top TOP_DOUT_ACLK_ISP1_400>,
+				 <&clock_top TOP_MOUT_ACLK_ISP1_266>;
+			clock-names = "fin_pll",
+				      "dout_aclk_isp1_266",
+				      "dout_aclk_isp1_400",
+				      "mout_aclk_isp1_266";
 		};
 
 		clock_gscl: clock-controller@13f00000 {
 			compatible = "samsung,exynos5260-clock-gscl";
 			reg = <0x13F00000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&clock_top TOP_DOUT_ACLK_GSCL_400>,
+				 <&clock_top TOP_DOUT_ACLK_GSCL_333>;
+			clock-names = "fin_pll",
+				      "dout_aclk_gscl_400",
+				      "dout_aclk_gscl_333";
 		};
 
 		clock_disp: clock-controller@14550000 {
 			compatible = "samsung,exynos5260-clock-disp";
 			reg = <0x14550000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&ioclk_spdif>,
+				 <&clock_top TOP_DOUT_ACLK_PERI_AUD>,
+				 <&clock_top TOP_DOUT_ACLK_DISP_222>,
+				 <&clock_top TOP_DOUT_SCLK_DISP_PIXEL>,
+				 <&clock_top TOP_DOUT_ACLK_DISP_333>;
+			clock-names = "fin_pll",
+				      "phyclk_dptx_phy_ch3_txd_clk",
+				      "phyclk_dptx_phy_ch2_txd_clk",
+				      "phyclk_dptx_phy_ch1_txd_clk",
+				      "phyclk_dptx_phy_ch0_txd_clk",
+				      "phyclk_hdmi_phy_tmds_clko",
+				      "phyclk_hdmi_phy_ref_clko",
+				      "phyclk_hdmi_phy_pixel_clko",
+				      "phyclk_hdmi_link_o_tmds_clkhi",
+				      "phyclk_mipi_dphy_4l_m_txbyte_clkhs",
+				      "phyclk_dptx_phy_o_ref_clk_24m",
+				      "phyclk_dptx_phy_clk_div2",
+				      "phyclk_mipi_dphy_4l_m_rxclkesc0",
+				      "phyclk_hdmi_phy_ref_cko",
+				      "ioclk_spdif_extclk",
+				      "dout_aclk_peri_aud",
+				      "dout_aclk_disp_222",
+				      "dout_sclk_disp_pixel",
+				      "dout_aclk_disp_333";
 		};
 
 		gic: interrupt-controller@10481000 {
@@ -205,7 +333,8 @@
 		};
 
 		mct: timer@100b0000 {
-			compatible = "samsung,exynos4210-mct";
+			compatible = "samsung,exynos5260-mct",
+				     "samsung,exynos4210-mct";
 			reg = <0x100B0000 0x1000>;
 			clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>;
 			clock-names = "fin_pll", "mct";
diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
index 884fef55836c..d1cbc6b8a570 100644
--- a/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -188,8 +188,7 @@
 		interrupt-parent = <&gpx0>;
 		interrupts = <4 IRQ_TYPE_NONE>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&max77802_irq>, <&pmic_dvs_1>, <&pmic_dvs_2>,
-			    <&pmic_dvs_3>;
+		pinctrl-0 = <&max77802_irq>, <&pmic_dvs_1>, <&pmic_dvs_2>;
 		wakeup-source;
 		#clock-cells = <1>;
 
@@ -394,10 +393,6 @@
 				regulator-always-on;
 			};
 
-			ldo16_reg: LDO16 {
-				regulator-name = "ldo16";
-			};
-
 			ldo17_reg: LDO17 {
 				regulator-name = "cam_sensor_core";
 				regulator-min-microvolt = <1200000>;
@@ -427,10 +422,6 @@
 				regulator-max-microvolt = <2850000>;
 			};
 
-			ldo22_reg: LDO22 {
-				regulator-name = "ldo22";
-			};
-
 			ldo23_reg: LDO23 {
 				regulator-name = "dp_p3v3";
 				regulator-min-microvolt = <3300000>;
@@ -477,10 +468,6 @@
 				regulator-always-on;
 			};
 
-			ldo31_reg: LDO31 {
-				regulator-name = "ldo31";
-			};
-
 			/* On revisions with ti,ina231 this is sensor VS */
 			ldo32_reg: LDO32 {
 				regulator-name = "vs_power_meter";
@@ -548,14 +535,14 @@
 };
 
 &pinctrl_0 {
-	emmc_nrst_pin: emmc-nrst {
+	emmc_nrst_pin: emmc-nrst-pins {
 		samsung,pins = "gpd1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	sd2_wp: sd2-wp {
+	sd2_wp: sd2-wp-pins {
 		samsung,pins = "gpm5-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		/* Pin is floating so be sure to disable write-protect */
@@ -563,21 +550,14 @@
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	pmic_dvs_3: pmic-dvs-3 {
-		samsung,pins = "gpx0-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	pmic_dvs_2: pmic-dvs-2 {
-		samsung,pins = "gpx0-1";
+	pmic_dvs_2: pmic-dvs-2-pins {
+		samsung,pins = "gpx0-0", "gpx0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pmic_dvs_1: pmic-dvs-1 {
+	pmic_dvs_1: pmic-dvs-1-pins {
 		samsung,pins = "gpx0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -585,7 +565,7 @@
 		samsung,pin-val = <1>;
 	};
 
-	max77802_irq: max77802-irq {
+	max77802_irq: max77802-irq-pins {
 		samsung,pins = "gpx0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -675,8 +655,8 @@
 	#address-cells = <1>;
 	#size-cells = <0>;
 
-	ethernet: usbether@2 {
-		compatible = "usb0424,9730";
+	ethernet: ethernet@2 {
+		compatible = "usb424,9730";
 		reg = <2>;
 		local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */
 	};
diff --git a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
index 9599ba8ba798..f7b923382892 100644
--- a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
@@ -6,10 +6,10 @@
  *              https://www.hardkernel.com
  */
 
-#include <dt-bindings/pinctrl/samsung.h>
+#include "exynos-pinctrl.h"
 
 &pinctrl_0 {
-	gpa0: gpa0 {
+	gpa0: gpa0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -17,7 +17,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpa1: gpa1 {
+	gpa1: gpa1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -25,7 +25,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpa2: gpa2 {
+	gpa2: gpa2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -33,7 +33,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb0: gpb0 {
+	gpb0: gpb0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -41,7 +41,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb1: gpb1 {
+	gpb1: gpb1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -49,7 +49,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb2: gpb2 {
+	gpb2: gpb2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -57,7 +57,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb3: gpb3 {
+	gpb3: gpb3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -65,7 +65,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc0: gpc0 {
+	gpc0: gpc0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -73,7 +73,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc3: gpc3 {
+	gpc3: gpc3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -81,7 +81,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc1: gpc1 {
+	gpc1: gpc1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -89,7 +89,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc2: gpc2 {
+	gpc2: gpc2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -97,12 +97,12 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpm5: gpm5 {
+	gpm5: gpm5-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpd1: gpd1 {
+	gpd1: gpd1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -110,7 +110,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpe0: gpe0 {
+	gpe0: gpe0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -118,7 +118,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpe1: gpe1 {
+	gpe1: gpe1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -126,7 +126,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf0: gpf0 {
+	gpf0: gpf0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -134,7 +134,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf1: gpf1 {
+	gpf1: gpf1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -142,7 +142,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg0: gpg0 {
+	gpg0: gpg0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -150,7 +150,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg1: gpg1 {
+	gpg1: gpg1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -158,7 +158,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg2: gpg2 {
+	gpg2: gpg2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -166,7 +166,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gph0: gph0 {
+	gph0: gph0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -174,7 +174,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gph1: gph1 {
+	gph1: gph1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -182,52 +182,52 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpm7: gpm7 {
+	gpm7: gpm7-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy0: gpy0 {
+	gpy0: gpy0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy1: gpy1 {
+	gpy1: gpy1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy2: gpy2 {
+	gpy2: gpy2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy3: gpy3 {
+	gpy3: gpy3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy4: gpy4 {
+	gpy4: gpy4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy5: gpy5 {
+	gpy5: gpy5-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy6: gpy6 {
+	gpy6: gpy6-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy7: gpy7 {
+	gpy7: gpy7-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpx0: gpx0 {
+	gpx0: gpx0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -244,7 +244,7 @@
 			     <27 1>;
 	};
 
-	gpx1: gpx1 {
+	gpx1: gpx1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -261,7 +261,7 @@
 			     <31 1>;
 	};
 
-	gpx2: gpx2 {
+	gpx2: gpx2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -269,7 +269,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx3: gpx3 {
+	gpx3: gpx3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -277,210 +277,210 @@
 		#interrupt-cells = <2>;
 	};
 
-	uart0_data: uart0-data {
+	uart0_data: uart0-data-pins {
 		samsung,pins = "gpa0-0", "gpa0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	uart0_fctl: uart0-fctl {
+	uart0_fctl: uart0-fctl-pins {
 		samsung,pins = "gpa0-2", "gpa0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	uart1_data: uart1-data {
+	uart1_data: uart1-data-pins {
 		samsung,pins = "gpa0-4", "gpa0-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	uart1_fctl: uart1-fctl {
+	uart1_fctl: uart1-fctl-pins {
 		samsung,pins = "gpa0-6", "gpa0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c2_bus: i2c2-bus {
+	i2c2_bus: i2c2-bus-pins {
 		samsung,pins = "gpa0-6", "gpa0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	uart2_data: uart2-data {
+	uart2_data: uart2-data-pins {
 		samsung,pins = "gpa1-0", "gpa1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	uart2_fctl: uart2-fctl {
+	uart2_fctl: uart2-fctl-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c3_bus: i2c3-bus {
+	i2c3_bus: i2c3-bus-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	uart3_data: uart3-data {
+	uart3_data: uart3-data-pins {
 		samsung,pins = "gpa1-4", "gpa1-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c4_hs_bus: i2c4-hs-bus {
+	i2c4_hs_bus: i2c4-hs-bus-pins {
 		samsung,pins = "gpa2-0", "gpa2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c5_hs_bus: i2c5-hs-bus {
+	i2c5_hs_bus: i2c5-hs-bus-pins {
 		samsung,pins = "gpa2-2", "gpa2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c6_hs_bus: i2c6-hs-bus {
+	i2c6_hs_bus: i2c6-hs-bus-pins {
 		samsung,pins = "gpb1-3", "gpb1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pwm0_out: pwm0-out {
+	pwm0_out: pwm0-out-pins {
 		samsung,pins = "gpb2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pwm1_out: pwm1-out {
+	pwm1_out: pwm1-out-pins {
 		samsung,pins = "gpb2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pwm2_out: pwm2-out {
+	pwm2_out: pwm2-out-pins {
 		samsung,pins = "gpb2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pwm3_out: pwm3-out {
+	pwm3_out: pwm3-out-pins {
 		samsung,pins = "gpb2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c7_hs_bus: i2c7-hs-bus {
+	i2c7_hs_bus: i2c7-hs-bus-pins {
 		samsung,pins = "gpb2-2", "gpb2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c0_bus: i2c0-bus {
+	i2c0_bus: i2c0-bus-pins {
 		samsung,pins = "gpb3-0", "gpb3-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c1_bus: i2c1-bus {
+	i2c1_bus: i2c1-bus-pins {
 		samsung,pins = "gpb3-2", "gpb3-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	sd0_clk: sd0-clk {
+	sd0_clk: sd0-clk-pins {
 		samsung,pins = "gpc0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd0_cmd: sd0-cmd {
+	sd0_cmd: sd0-cmd-pins {
 		samsung,pins = "gpc0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd0_cd: sd0-cd {
+	sd0_cd: sd0-cd-pins {
 		samsung,pins = "gpc0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd0_bus1: sd0-bus-width1 {
+	sd0_bus1: sd0-bus-width1-pins {
 		samsung,pins = "gpc0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd0_bus4: sd0-bus-width4 {
+	sd0_bus4: sd0-bus-width4-pins {
 		samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd2_clk: sd2-clk {
+	sd2_clk: sd2-clk-pins {
 		samsung,pins = "gpc2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd2_cmd: sd2-cmd {
+	sd2_cmd: sd2-cmd-pins {
 		samsung,pins = "gpc2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd2_cd: sd2-cd {
+	sd2_cd: sd2-cd-pins {
 		samsung,pins = "gpc2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd2_bus1: sd2-bus-width1 {
+	sd2_bus1: sd2-bus-width1-pins {
 		samsung,pins = "gpc2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd2_bus4: sd2-bus-width4 {
+	sd2_bus4: sd2-bus-width4-pins {
 		samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd0_bus8: sd0-bus-width8 {
+	sd0_bus8: sd0-bus-width8-pins {
 		samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -489,7 +489,7 @@
 };
 
 &pinctrl_1 {
-	gpj0: gpj0 {
+	gpj0: gpj0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -497,7 +497,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpj1: gpj1 {
+	gpj1: gpj1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -505,7 +505,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpj2: gpj2 {
+	gpj2: gpj2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -513,7 +513,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpj3: gpj3 {
+	gpj3: gpj3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -521,7 +521,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpj4: gpj4 {
+	gpj4: gpj4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -529,7 +529,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk0: gpk0 {
+	gpk0: gpk0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -537,7 +537,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk1: gpk1 {
+	gpk1: gpk1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -545,7 +545,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk2: gpk2 {
+	gpk2: gpk2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -553,7 +553,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk3: gpk3 {
+	gpk3: gpk3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -561,28 +561,28 @@
 		#interrupt-cells = <2>;
 	};
 
-	usb3_1_oc: usb3-1-oc {
+	usb3_1_oc: usb3-1-oc-pins {
 		samsung,pins = "gpk2-4", "gpk2-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	usb3_1_vbusctrl: usb3-1-vbusctrl {
+	usb3_1_vbusctrl: usb3-1-vbusctrl-pins {
 		samsung,pins = "gpk2-6", "gpk2-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	usb3_0_oc: usb3-0-oc {
+	usb3_0_oc: usb3-0-oc-pins {
 		samsung,pins = "gpk3-0", "gpk3-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	usb3_0_vbusctrl: usb3-0-vbusctrl {
+	usb3_0_vbusctrl: usb3-0-vbusctrl-pins {
 		samsung,pins = "gpk3-2", "gpk3-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
@@ -591,7 +591,7 @@
 };
 
 &pinctrl_2 {
-	gpv0: gpv0 {
+	gpv0: gpv0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -599,7 +599,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpv1: gpv1 {
+	gpv1: gpv1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -607,7 +607,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpv2: gpv2 {
+	gpv2: gpv2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -615,7 +615,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpv3: gpv3 {
+	gpv3: gpv3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -623,7 +623,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpv4: gpv4 {
+	gpv4: gpv4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -633,7 +633,7 @@
 };
 
 &pinctrl_3 {
-	gpz: gpz {
+	gpz: gpz-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -641,7 +641,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	audi2s0_bus: audi2s0-bus {
+	audi2s0_bus: audi2s0-bus-pins {
 		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
 				"gpz-4";
 		samsung,pin-function = <2>;
diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts
index 2a3ade77a2de..b8f953c41c73 100644
--- a/arch/arm/boot/dts/exynos5410-smdk5410.dts
+++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts
@@ -41,6 +41,19 @@
 		reg = <0x02037000 0x1000>;
 	};
 
+	vdd10_usb3: voltage-regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD10_USB3";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+	};
+
+	vdd33_usb3: voltage-regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD33_USB3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 };
 
 &mmc_0 {
@@ -66,14 +79,14 @@
 };
 
 &pinctrl_0 {
-	srom_ctl: srom-ctl {
+	srom_ctl: srom-ctl-pins {
 		samsung,pins = "gpy0-3", "gpy0-4", "gpy0-5",
 			       "gpy1-0", "gpy1-1", "gpy1-2", "gpy1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	srom_ebi: srom-ebi {
+	srom_ebi: srom-ebi-pins {
 		samsung,pins = "gpy3-0", "gpy3-1", "gpy3-2", "gpy3-3",
 			       "gpy3-4", "gpy3-5", "gpy3-6", "gpy3-7",
 			       "gpy5-0", "gpy5-1", "gpy5-2", "gpy5-3",
@@ -121,3 +134,13 @@
 &serial_2 {
 	status = "okay";
 };
+
+&usbdrd3_0 {
+	vdd10-supply = <&vdd10_usb3>;
+	vdd33-supply = <&vdd33_usb3>;
+};
+
+&usbdrd3_1 {
+	vdd10-supply = <&vdd10_usb3>;
+	vdd33-supply = <&vdd33_usb3>;
+};
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 584ce62361b1..8a6b890fb8f7 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -189,26 +189,22 @@
 			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		pdma0: pdma@121a0000 {
+		pdma0: dma-controller@121a0000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x121a0000 0x1000>;
 			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_PDMA0>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
 		};
 
-		pdma1: pdma@121b0000 {
+		pdma1: dma-controller@121b0000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x121b0000 0x1000>;
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_PDMA1>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
 		};
 
 		audi2s0: i2s@3830000 {
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index dfc7f14f5772..55b7759682a9 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -42,7 +42,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wakeup {
+		key-wakeup {
 			label = "SW-TACT1";
 			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WAKEUP>;
@@ -808,7 +808,7 @@
 };
 
 &pinctrl_0 {
-	s2mps11_irq: s2mps11-irq {
+	s2mps11_irq: s2mps11-irq-pins {
 		samsung,pins = "gpx3-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -825,3 +825,13 @@
 &usbdrd_dwc3_1 {
 	dr_mode = "host";
 };
+
+&usbdrd3_0 {
+	vdd10-supply = <&ldo11_reg>;
+	vdd33-supply = <&ldo9_reg>;
+};
+
+&usbdrd3_1 {
+	vdd10-supply = <&ldo11_reg>;
+	vdd33-supply = <&ldo9_reg>;
+};
diff --git a/arch/arm/boot/dts/exynos5420-chagall-wifi.dts b/arch/arm/boot/dts/exynos5420-chagall-wifi.dts
new file mode 100644
index 000000000000..1319344a2c74
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5420-chagall-wifi.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos5420 Chagall WiFi board device tree source
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2022 Henrik Grimler
+ */
+
+/dts-v1/;
+#include "exynos5420-galaxy-tab-common.dtsi"
+
+/ {
+	model = "Samsung Chagall WiFi based on Exynos5420";
+	compatible = "samsung,chagall-wifi", "samsung,exynos5420", \
+		     "samsung,exynos5";
+};
+
+&ldo15_reg {
+	/* Unused */
+	regulator-name = "VDD_LDO15";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+};
+
+&ldo17_reg {
+	regulator-name = "VDD_IRLED_3V3";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3350000>;
+	regulator-always-on;
+	regulator-boot-on;
+
+	regulator-state-mem {
+		regulator-off-in-suspend;
+	};
+};
+
+&ldo28_reg {
+	/* Unused */
+	regulator-name = "VDD_LDO28";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+};
+
+&ldo29_reg {
+	regulator-name = "VDD_TCON_1V8";
+	regulator-min-microvolt = <1900000>;
+	regulator-max-microvolt = <1900000>;
+
+	regulator-state-mem {
+		regulator-off-in-suspend;
+	};
+};
+
+&ldo31_reg {
+	regulator-name = "VDD_GRIP_1V8";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+	regulator-boot-on;
+
+	regulator-state-mem {
+		regulator-off-in-suspend;
+	};
+};
+
+&ldo32_reg {
+	regulator-name = "VDD_TSP_1V8";
+	regulator-min-microvolt = <1900000>;
+	regulator-max-microvolt = <1900000>;
+
+	regulator-state-mem {
+		regulator-off-in-suspend;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi b/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi
new file mode 100644
index 000000000000..d19bc3d266fa
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi
@@ -0,0 +1,691 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Base DT for Samsung's family of tablets based on Exynos5420.
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2022 Henrik Grimler
+ */
+
+/dts-v1/;
+#include "exynos5420.dtsi"
+#include "exynos5420-cpus.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/samsung,s2mps11.h>
+
+/ {
+	chassis-type = "tablet";
+
+	/*
+	 * To successfully boot the mainline kernel with the stock
+	 * bootloader (SBOOT), the tlb needs to be flushed after the
+	 * page table pointer has been updated in __common_mmu_cache_on.
+	 * The same hack is also needed to boot exynos4412-i9300 with
+	 * stock bootloader, and probably other Samsung devices of
+	 * similar age.  See
+	 * https://lore.kernel.org/all/1355276466-18295-1-git-send-email-arve@android.com
+	 * for more details.
+	 */
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0xc0000000>;
+	};
+
+	firmware@2073000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x02073000 0x1000>;
+	};
+
+	fixed-rate-clocks {
+		oscclk {
+			compatible = "samsung,exynos5420-oscclk";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+
+		key-power {
+			debounce-interval = <10>;
+			gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
+			label = "Power";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		key-home {
+			debounce-interval = <10>;
+			gpios = <&gpx0 5 GPIO_ACTIVE_LOW>;
+			label = "Home";
+			linux,code = <KEY_HOME>;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			debounce-interval = <10>;
+			gpios = <&gpx0 2 GPIO_ACTIVE_LOW>;
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		key-volume-down {
+			debounce-interval = <10>;
+			gpios = <&gpx0 3 GPIO_ACTIVE_LOW>;
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+};
+
+&cci {
+	/* CCI is disabled in hardware */
+	status = "disabled";
+};
+
+&cpu0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&buck6_reg>;
+};
+
+&gpu {
+	status = "okay";
+	mali-supply = <&buck4_reg>;
+};
+
+&hsi2c_7 {
+	status = "okay";
+
+	pmic@66 {
+		compatible = "samsung,s2mps11-pmic";
+		reg = <0x66>;
+
+		interrupt-parent = <&gpx3>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&s2mps11_irq>;
+
+		s2mps11_osc: clocks {
+			compatible = "samsung,s2mps11-clk";
+			#clock-cells = <1>;
+			clock-output-names = "s2mps11_ap", "s2mps11_cp",
+					     "s2mps11_bt";
+		};
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "VDD_MIF_1V1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "VDD_ARM_1V0";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "VDD_INT_1V0";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "VDD_G3D_1V0";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "VDD_MEM_1V2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "VDD_KFC_1V0";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "VIN_LLDO_1V4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "VIN_MLDO_2V0";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-always-on;
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "VIN_HLDO_3V5";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3500000>;
+				regulator-always-on;
+			};
+
+			buck10_reg: BUCK10 {
+				regulator-name = "VDD_CAM_ISP_1V0";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3550000>;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "VDD_ALIVE_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "VDD_APIO_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "VDD_APIO_MMC01_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "VDD_ADC_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo5_reg: LDO5 {
+				/* Unused */
+				regulator-name = "VDD_LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "VDD_MIPI_1V0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "VDD_MIPI_PLL_ABB1_18V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo8_reg: LDO8 {
+				/* Unused */
+				regulator-name = "VDD_LDO8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "VDD_UOTG_3V0";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "VDDQ_PRE_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "VDD_HSIC_1V0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "VDD_HSIC_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "VDD_APIO_MMC2_2V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "VDD_MOTOR_3V0";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "VDD_LDO15";
+				/*
+				 * LDO15 varies between devices and is
+				 * specified in the device dts
+				 */
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "VDD_AP_2V8";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "VDD_LDO17";
+				/*
+				 * LDO17 varies between devices and is
+				 * specified in the device dts
+				 */
+			};
+
+			ldo18_reg: LDO18 {
+				/* Unused */
+				regulator-name = "VDD_LDO18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "VDD_VTF_2V8";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-name = "VDD_CAM1_CAM_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "VDD_CAM_IO_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo22_reg: LDO22 {
+				regulator-name = "VDD_CAM0_S_CORE_1V1";
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1200000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "VDD_MIFS_1V1";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo24_reg: LDO24 {
+				regulator-name = "VDD_TSP_3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo25_reg: LDO25 {
+				/* Unused */
+				regulator-name = "VDD_LDO25";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo26_reg: LDO26 {
+				regulator-name = "VDD_CAM0_AF_2V8";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo27_reg: LDO27 {
+				regulator-name = "VDD_G3DS_1V0";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo28_reg: LDO28 {
+				regulator-name = "VDD_LDO28";
+				/*
+				 * LDO28 varies between devices and is
+				 * specified in the device dts
+				 */
+			};
+
+			ldo29_reg: LDO29 {
+				regulator-name = "VDD_LDO29";
+				/*
+				 * LDO29 varies between devices and is
+				 * specified in the device dts
+				 */
+			};
+
+			ldo30_reg: LDO30 {
+				regulator-name = "VDD_TOUCH_1V8";
+				regulator-min-microvolt = <1900000>;
+				regulator-max-microvolt = <1900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo31_reg: LDO31 {
+				regulator-name = "VDD_LDO31";
+				/*
+				 * LDO31 varies between devices and is
+				 * specified in the device dts
+				 */
+			};
+
+			ldo32_reg: LDO32 {
+				regulator-name = "VDD_LDO32";
+				/*
+				 * LDO32 varies between devices and is
+				 * specified in the device dts
+				 */
+			};
+
+			ldo33_reg: LDO33 {
+				regulator-name = "VDD_MHL_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo34_reg: LDO34 {
+				regulator-name = "VDD_MHL_3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo35_reg: LDO35 {
+				regulator-name = "VDD_SIL_1V2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo36_reg: LDO36 {
+				/* Unused */
+				regulator-name = "VDD_LDO36";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo37_reg: LDO37 {
+				/* Unused */
+				regulator-name = "VDD_LDO37";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo38_reg: LDO38 {
+				regulator-name = "VDD_KEY_LED_3V3";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&mixer {
+	status = "okay";
+};
+
+/* Internal storage */
+&mmc_0 {
+	status = "okay";
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	card-detect-delay = <200>;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+	pinctrl-names = "default";
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	vqmmc-supply = <&ldo3_reg>;
+};
+
+/* External sdcard */
+&mmc_2 {
+	status = "okay";
+	bus-width = <4>;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	cd-gpios = <&gpx2 4 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &mmc2_cd &sd2_bus1 &sd2_bus4>;
+	pinctrl-names = "default";
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	sd-uhs-sdr50;
+	vmmc-supply = <&ldo19_reg>;
+	vqmmc-supply = <&ldo13_reg>;
+};
+
+&pinctrl_0 {
+	mmc2_cd: mmc2-cd-pins {
+		samsung,pins = "gpx2-4";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	s2mps11_irq: s2mps11-irq-pins {
+		samsung,pins = "gpx3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&tmu_cpu0 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu1 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu2 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu3 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_gpu {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "peripheral";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "peripheral";
+};
+
+&usbdrd3_0 {
+	vdd33-supply = <&ldo9_reg>;
+	vdd10-supply = <&ldo11_reg>;
+};
+
+&usbdrd3_1 {
+	vdd33-supply = <&ldo9_reg>;
+	vdd10-supply = <&ldo11_reg>;
+};
diff --git a/arch/arm/boot/dts/exynos5420-klimt-wifi.dts b/arch/arm/boot/dts/exynos5420-klimt-wifi.dts
new file mode 100644
index 000000000000..011787b1bbf0
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5420-klimt-wifi.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos5420 Klimt WiFi board device tree source
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2022 Henrik Grimler
+ */
+
+/dts-v1/;
+#include "exynos5420-galaxy-tab-common.dtsi"
+
+/ {
+	model = "Samsung Klimt WiFi based on Exynos5420";
+	compatible = "samsung,klimt-wifi", "samsung,exynos5420", \
+		     "samsung,exynos5";
+};
+
+&ldo15_reg {
+	/* Unused */
+	regulator-name = "VDD_LDO15";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+};
+
+&ldo17_reg {
+	regulator-name = "VDD_VCI_3V0";
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+
+	regulator-state-mem {
+		regulator-off-in-suspend;
+	};
+};
+
+&ldo28_reg {
+	regulator-name = "VDD3_1V8";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+
+	regulator-state-mem {
+		regulator-off-in-suspend;
+	};
+};
+
+&ldo29_reg {
+	regulator-name = "VDDR_1V6";
+	regulator-min-microvolt = <1600000>;
+	regulator-max-microvolt = <1600000>;
+
+	regulator-state-mem {
+		regulator-off-in-suspend;
+	};
+};
+
+&ldo31_reg {
+	/* Unused */
+	regulator-name = "VDD_LDO31";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+&ldo32_reg {
+	regulator-name = "VDD_TSP_1V8";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+
+	regulator-state-mem {
+		regulator-off-in-suspend;
+	};
+};
+
+&mmc_2 {
+	sd-uhs-sdr104;
+};
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index e76fb104db19..9e2123470cad 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -60,7 +60,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&power_key_irq &lid_irq>;
 
-		power {
+		power-key {
 			label = "Power";
 			gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
@@ -212,7 +212,7 @@
 		interrupts = <1 IRQ_TYPE_NONE>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&max77802_irq>, <&pmic_selb>,
-			    <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>;
+			    <&pmic_dvs_1>, <&pmic_dvs_2>;
 		wakeup-source;
 		reg = <0x9>;
 		#clock-cells = <1>;
@@ -774,14 +774,14 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mask_tpm_reset>;
 
-	wifi_en: wifi-en {
+	wifi_en: wifi-en-pins {
 		samsung,pins = "gpx0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	max98090_irq: max98090-irq {
+	max98090_irq: max98090-irq-pins {
 		samsung,pins = "gpx0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -789,7 +789,7 @@
 	};
 
 	/* We need GPX0_6 to be low at sleep time; just keep it low always */
-	mask_tpm_reset: mask-tpm-reset {
+	mask_tpm_reset: mask-tpm-reset-pins {
 		samsung,pins = "gpx0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -797,70 +797,70 @@
 		samsung,pin-val = <0>;
 	};
 
-	tpm_irq: tpm-irq {
+	tpm_irq: tpm-irq-pins {
 		samsung,pins = "gpx1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	trackpad_irq: trackpad-irq {
+	trackpad_irq: trackpad-irq-pins {
 		samsung,pins = "gpx1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	power_key_irq: power-key-irq {
+	power_key_irq: power-key-irq-pins {
 		samsung,pins = "gpx1-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	ec_irq: ec-irq {
+	ec_irq: ec-irq-pins {
 		samsung,pins = "gpx1-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	tps65090_irq: tps65090-irq {
+	tps65090_irq: tps65090-irq-pins {
 		samsung,pins = "gpx2-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	dp_hpd_gpio: dp_hpd_gpio {
+	dp_hpd_gpio: dp-hpd-gpio-pins {
 		samsung,pins = "gpx2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	max77802_irq: max77802-irq {
+	max77802_irq: max77802-irq-pins {
 		samsung,pins = "gpx3-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	lid_irq: lid-irq {
+	lid_irq: lid-irq-pins {
 		samsung,pins = "gpx3-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	hdmi_hpd_irq: hdmi-hpd-irq {
+	hdmi_hpd_irq: hdmi-hpd-irq-pins {
 		samsung,pins = "gpx3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pmic_dvs_1: pmic-dvs-1 {
+	pmic_dvs_1: pmic-dvs-1-pins {
 		samsung,pins = "gpy7-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -868,74 +868,67 @@
 	};
 };
 
-&pinctrl_1 {
-	/* Adjust WiFi drive strengths lower for EMI */
-	sd1_clk: sd1-clk {
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-	};
+/* pinctrl_1 */
+/* Adjust WiFi drive strengths lower for EMI */
+&sd1_bus1 {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
 
-	sd1_cmd: sd1-cmd {
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-	};
+&sd1_bus4 {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
 
-	sd1_bus1: sd1-bus-width1 {
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-	};
+&sd1_bus8 {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
 
-	sd1_bus4: sd1-bus-width4 {
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-	};
+&sd1_clk {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
 
-	sd1_bus8: sd1-bus-width8 {
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-	};
+&sd1_cmd {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 };
 
 &pinctrl_2 {
-	pmic_dvs_2: pmic-dvs-2 {
-		samsung,pins = "gpj4-2";
+	pmic_dvs_2: pmic-dvs-2-pins {
+		samsung,pins = "gpj4-2", "gpj4-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
+};
 
-	pmic_dvs_3: pmic-dvs-3 {
-		samsung,pins = "gpj4-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
+/* pinctrl_3*/
+/* Drive SPI lines at x2 for better integrity */
+&spi2_bus {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 };
 
 &pinctrl_3 {
-	/* Drive SPI lines at x2 for better integrity */
-	spi2-bus {
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-	};
-
 	/* Drive SPI chip select at x2 for better integrity */
-	ec_spi_cs: ec-spi-cs {
+	ec_spi_cs: ec-spi-cs-pins {
 		samsung,pins = "gpb1-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 
-	usb300_vbus_en: usb300-vbus-en {
+	usb300_vbus_en: usb300-vbus-en-pins {
 		samsung,pins = "gph0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	usb301_vbus_en: usb301-vbus-en {
+	usb301_vbus_en: usb301-vbus-en-pins {
 		samsung,pins = "gph0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pmic_selb: pmic-selb {
+	pmic_selb: pmic-selb-pins {
 		samsung,pins = "gph0-2", "gph0-3", "gph0-4", "gph0-5",
 			       "gph0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
@@ -1090,6 +1083,16 @@
 	vtmu-supply = <&ldo10_reg>;
 };
 
+&usbdrd3_0 {
+	vdd10-supply = <&ldo15_reg>;
+	vdd33-supply = <&ldo12_reg>;
+};
+
+&usbdrd3_1 {
+	vdd10-supply = <&ldo15_reg>;
+	vdd33-supply = <&ldo12_reg>;
+};
+
 &usbdrd_dwc3_0 {
 	dr_mode = "host";
 };
diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
index b82af7c89654..14cf9c4ca0ed 100644
--- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
@@ -9,10 +9,10 @@
  * tree nodes are listed in this file.
  */
 
-#include <dt-bindings/pinctrl/samsung.h>
+#include "exynos-pinctrl.h"
 
 &pinctrl_0 {
-	gpy7: gpy7 {
+	gpy7: gpy7-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -20,7 +20,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx0: gpx0 {
+	gpx0: gpx0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -31,7 +31,7 @@
 			     <26 0>, <26 1>, <27 0>, <27 1>;
 	};
 
-	gpx1: gpx1 {
+	gpx1: gpx1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -42,7 +42,7 @@
 			     <30 0>, <30 1>, <31 0>, <31 1>;
 	};
 
-	gpx2: gpx2 {
+	gpx2: gpx2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -50,7 +50,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx3: gpx3 {
+	gpx3: gpx3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -58,14 +58,14 @@
 		#interrupt-cells = <2>;
 	};
 
-	dp_hpd: dp_hpd {
+	dp_hpd: dp-hpd-pins {
 		samsung,pins = "gpx0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	hdmi_cec: hdmi-cec {
+	hdmi_cec: hdmi-cec-pins {
 		samsung,pins = "gpx3-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -74,7 +74,7 @@
 };
 
 &pinctrl_1 {
-	gpc0: gpc0 {
+	gpc0: gpc0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -82,7 +82,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc1: gpc1 {
+	gpc1: gpc1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -90,7 +90,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc2: gpc2 {
+	gpc2: gpc2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -98,7 +98,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc3: gpc3 {
+	gpc3: gpc3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -106,7 +106,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc4: gpc4 {
+	gpc4: gpc4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -114,7 +114,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd1: gpd1 {
+	gpd1: gpd1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -122,175 +122,175 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpy0: gpy0 {
+	gpy0: gpy0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy1: gpy1 {
+	gpy1: gpy1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy2: gpy2 {
+	gpy2: gpy2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy3: gpy3 {
+	gpy3: gpy3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy4: gpy4 {
+	gpy4: gpy4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy5: gpy5 {
+	gpy5: gpy5-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy6: gpy6 {
+	gpy6: gpy6-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	sd0_clk: sd0-clk {
+	sd0_clk: sd0-clk-pins {
 		samsung,pins = "gpc0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd0_cmd: sd0-cmd {
+	sd0_cmd: sd0-cmd-pins {
 		samsung,pins = "gpc0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd0_cd: sd0-cd {
+	sd0_cd: sd0-cd-pins {
 		samsung,pins = "gpc0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd0_bus1: sd0-bus-width1 {
+	sd0_bus1: sd0-bus-width1-pins {
 		samsung,pins = "gpc0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd0_bus4: sd0-bus-width4 {
+	sd0_bus4: sd0-bus-width4-pins {
 		samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd0_bus8: sd0-bus-width8 {
+	sd0_bus8: sd0-bus-width8-pins {
 		samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd0_rclk: sd0-rclk {
+	sd0_rclk: sd0-rclk-pins {
 		samsung,pins = "gpc0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd1_clk: sd1-clk {
+	sd1_clk: sd1-clk-pins {
 		samsung,pins = "gpc1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd1_cmd: sd1-cmd {
+	sd1_cmd: sd1-cmd-pins {
 		samsung,pins = "gpc1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd1_cd: sd1-cd {
+	sd1_cd: sd1-cd-pins {
 		samsung,pins = "gpc1-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd1_int: sd1-int {
+	sd1_int: sd1-int-pins {
 		samsung,pins = "gpd1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	sd1_bus1: sd1-bus-width1 {
+	sd1_bus1: sd1-bus-width1-pins {
 		samsung,pins = "gpc1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd1_bus4: sd1-bus-width4 {
+	sd1_bus4: sd1-bus-width4-pins {
 		samsung,pins = "gpc1-4", "gpc1-5", "gpc1-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd1_bus8: sd1-bus-width8 {
+	sd1_bus8: sd1-bus-width8-pins {
 		samsung,pins = "gpd1-4", "gpd1-5", "gpd1-6", "gpd1-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd2_clk: sd2-clk {
+	sd2_clk: sd2-clk-pins {
 		samsung,pins = "gpc2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd2_cmd: sd2-cmd {
+	sd2_cmd: sd2-cmd-pins {
 		samsung,pins = "gpc2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd2_cd: sd2-cd {
+	sd2_cd: sd2-cd-pins {
 		samsung,pins = "gpc2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd2_bus1: sd2-bus-width1 {
+	sd2_bus1: sd2-bus-width1-pins {
 		samsung,pins = "gpc2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd2_bus4: sd2-bus-width4 {
+	sd2_bus4: sd2-bus-width4-pins {
 		samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd2_wp: sd2-wp {
+	sd2_wp: sd2-wp-pins {
 		samsung,pins = "gpc4-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
@@ -299,7 +299,7 @@
 };
 
 &pinctrl_2 {
-	gpe0: gpe0 {
+	gpe0: gpe0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -307,7 +307,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpe1: gpe1 {
+	gpe1: gpe1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -315,7 +315,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf0: gpf0 {
+	gpf0: gpf0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -323,7 +323,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf1: gpf1 {
+	gpf1: gpf1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -331,7 +331,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg0: gpg0 {
+	gpg0: gpg0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -339,7 +339,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg1: gpg1 {
+	gpg1: gpg1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -347,7 +347,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg2: gpg2 {
+	gpg2: gpg2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -355,7 +355,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpj4: gpj4 {
+	gpj4: gpj4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -363,7 +363,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	cam_gpio_a: cam-gpio-a {
+	cam_gpio_a: cam-gpio-a-pins {
 		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
 			       "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
 			       "gpe1-0", "gpe1-1";
@@ -372,7 +372,7 @@
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	cam_gpio_b: cam-gpio-b {
+	cam_gpio_b: cam-gpio-b-pins {
 		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
 			       "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -380,42 +380,42 @@
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	cam_i2c2_bus: cam-i2c2-bus {
+	cam_i2c2_bus: cam-i2c2-bus-pins {
 		samsung,pins = "gpf0-4", "gpf0-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	cam_spi1_bus: cam-spi1-bus {
+	cam_spi1_bus: cam-spi1-bus-pins {
 		samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	cam_i2c1_bus: cam-i2c1-bus {
+	cam_i2c1_bus: cam-i2c1-bus-pins {
 		samsung,pins = "gpf0-2", "gpf0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	cam_i2c0_bus: cam-i2c0-bus {
+	cam_i2c0_bus: cam-i2c0-bus-pins {
 		samsung,pins = "gpf0-0", "gpf0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	cam_spi0_bus: cam-spi0-bus {
+	cam_spi0_bus: cam-spi0-bus-pins {
 		samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	cam_bayrgb_bus: cam-bayrgb-bus {
+	cam_bayrgb_bus: cam-bayrgb-bus-pins {
 		samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3",
 			       "gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7",
 			       "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
@@ -428,7 +428,7 @@
 };
 
 &pinctrl_3 {
-	gpa0: gpa0 {
+	gpa0: gpa0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -436,7 +436,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpa1: gpa1 {
+	gpa1: gpa1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -444,7 +444,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpa2: gpa2 {
+	gpa2: gpa2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -452,7 +452,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb0: gpb0 {
+	gpb0: gpb0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -460,7 +460,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb1: gpb1 {
+	gpb1: gpb1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -468,7 +468,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb2: gpb2 {
+	gpb2: gpb2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -476,7 +476,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb3: gpb3 {
+	gpb3: gpb3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -484,7 +484,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb4: gpb4 {
+	gpb4: gpb4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -492,7 +492,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gph0: gph0 {
+	gph0: gph0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -500,98 +500,98 @@
 		#interrupt-cells = <2>;
 	};
 
-	uart0_data: uart0-data {
+	uart0_data: uart0-data-pins {
 		samsung,pins = "gpa0-0", "gpa0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	uart0_fctl: uart0-fctl {
+	uart0_fctl: uart0-fctl-pins {
 		samsung,pins = "gpa0-2", "gpa0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	uart1_data: uart1-data {
+	uart1_data: uart1-data-pins {
 		samsung,pins = "gpa0-4", "gpa0-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	uart1_fctl: uart1-fctl {
+	uart1_fctl: uart1-fctl-pins {
 		samsung,pins = "gpa0-6", "gpa0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c2_bus: i2c2-bus {
+	i2c2_bus: i2c2-bus-pins {
 		samsung,pins = "gpa0-6", "gpa0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	uart2_data: uart2-data {
+	uart2_data: uart2-data-pins {
 		samsung,pins = "gpa1-0", "gpa1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	uart2_fctl: uart2-fctl {
+	uart2_fctl: uart2-fctl-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c3_bus: i2c3-bus {
+	i2c3_bus: i2c3-bus-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	uart3_data: uart3-data {
+	uart3_data: uart3-data-pins {
 		samsung,pins = "gpa1-4", "gpa1-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	spi0_bus: spi0-bus {
+	spi0_bus: spi0-bus-pins {
 		samsung,pins = "gpa2-0", "gpa2-1", "gpa2-2", "gpa2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	spi1_bus: spi1-bus {
+	spi1_bus: spi1-bus-pins {
 		samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c4_hs_bus: i2c4-hs-bus {
+	i2c4_hs_bus: i2c4-hs-bus-pins {
 		samsung,pins = "gpa2-0", "gpa2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c5_hs_bus: i2c5-hs-bus {
+	i2c5_hs_bus: i2c5-hs-bus-pins {
 		samsung,pins = "gpa2-2", "gpa2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2s1_bus: i2s1-bus {
+	i2s1_bus: i2s1-bus-pins {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
 			       "gpb0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -599,7 +599,7 @@
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pcm1_bus: pcm1-bus {
+	pcm1_bus: pcm1-bus-pins {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
 			       "gpb0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -607,7 +607,7 @@
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2s2_bus: i2s2-bus {
+	i2s2_bus: i2s2-bus-pins {
 		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
 			       "gpb1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -615,7 +615,7 @@
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pcm2_bus: pcm2-bus {
+	pcm2_bus: pcm2-bus-pins {
 		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
 			       "gpb1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -623,91 +623,91 @@
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	spdif_bus: spdif-bus {
+	spdif_bus: spdif-bus-pins {
 		samsung,pins = "gpb1-0", "gpb1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	spi2_bus: spi2-bus {
+	spi2_bus: spi2-bus-pins {
 		samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c6_hs_bus: i2c6-hs-bus {
+	i2c6_hs_bus: i2c6-hs-bus-pins {
 		samsung,pins = "gpb1-3", "gpb1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pwm0_out: pwm0-out {
+	pwm0_out: pwm0-out-pins {
 		samsung,pins = "gpb2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pwm1_out: pwm1-out {
+	pwm1_out: pwm1-out-pins {
 		samsung,pins = "gpb2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pwm2_out: pwm2-out {
+	pwm2_out: pwm2-out-pins {
 		samsung,pins = "gpb2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pwm3_out: pwm3-out {
+	pwm3_out: pwm3-out-pins {
 		samsung,pins = "gpb2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c7_hs_bus: i2c7-hs-bus {
+	i2c7_hs_bus: i2c7-hs-bus-pins {
 		samsung,pins = "gpb2-2", "gpb2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c0_bus: i2c0-bus {
+	i2c0_bus: i2c0-bus-pins {
 		samsung,pins = "gpb3-0", "gpb3-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c1_bus: i2c1-bus {
+	i2c1_bus: i2c1-bus-pins {
 		samsung,pins = "gpb3-2", "gpb3-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c8_hs_bus: i2c8-hs-bus {
+	i2c8_hs_bus: i2c8-hs-bus-pins {
 		samsung,pins = "gpb3-4", "gpb3-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c9_hs_bus: i2c9-hs-bus {
+	i2c9_hs_bus: i2c9-hs-bus-pins {
 		samsung,pins = "gpb3-6", "gpb3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c10_hs_bus: i2c10-hs-bus {
+	i2c10_hs_bus: i2c10-hs-bus-pins {
 		samsung,pins = "gpb4-0", "gpb4-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -716,7 +716,7 @@
 };
 
 &pinctrl_4 {
-	gpz: gpz {
+	gpz: gpz-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -724,7 +724,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	i2s0_bus: i2s0-bus {
+	i2s0_bus: i2s0-bus-pins {
 		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
 				"gpz-4", "gpz-5", "gpz-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index a4f0e3ffedbd..4d7b6d9008a7 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -124,6 +124,9 @@
 	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd_irq>;
+	vdd-supply = <&ldo6_reg>;
+	vdd_osc-supply = <&ldo7_reg>;
+	vdd_pll-supply = <&ldo6_reg>;
 };
 
 &hsi2c_4 {
@@ -377,7 +380,7 @@
 };
 
 &pinctrl_0 {
-	hdmi_hpd_irq: hdmi-hpd-irq {
+	hdmi_hpd_irq: hdmi-hpd-irq-pins {
 		samsung,pins = "gpx3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
@@ -386,14 +389,14 @@
 };
 
 &pinctrl_2 {
-	usb300_vbus_en: usb300-vbus-en {
+	usb300_vbus_en: usb300-vbus-en-pins {
 		samsung,pins = "gpg0-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	usb301_vbus_en: usb301-vbus-en {
+	usb301_vbus_en: usb301-vbus-en-pins {
 		samsung,pins = "gpg1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -407,6 +410,16 @@
 	clock-names = "rtc", "rtc_src";
 };
 
+&usbdrd3_0 {
+	vdd10-supply = <&ldo11_reg>;
+	vdd33-supply = <&ldo9_reg>;
+};
+
+&usbdrd3_1 {
+	vdd10-supply = <&ldo11_reg>;
+	vdd33-supply = <&ldo9_reg>;
+};
+
 &usbdrd_phy0 {
 	vbus-supply = <&usb300_vbus_reg>;
 };
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index e23e8ffb093f..9f2523a873d9 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -302,8 +302,8 @@
 			clocks = <&clock CLK_PCLK_PPMU_DREX0_0>;
 			clock-names = "ppmu";
 			events {
-				ppmu_event3_dmc0_0: ppmu-event3-dmc0_0 {
-					event-name = "ppmu-event3-dmc0_0";
+				ppmu_event3_dmc0_0: ppmu-event3-dmc0-0 {
+					event-name = "ppmu-event3-dmc0-0";
 				};
 			};
 		};
@@ -314,8 +314,8 @@
 			clocks = <&clock CLK_PCLK_PPMU_DREX0_1>;
 			clock-names = "ppmu";
 			events {
-				ppmu_event3_dmc0_1: ppmu-event3-dmc0_1 {
-					event-name = "ppmu-event3-dmc0_1";
+				ppmu_event3_dmc0_1: ppmu-event3-dmc0-1 {
+					event-name = "ppmu-event3-dmc0-1";
 				};
 			};
 		};
@@ -326,8 +326,8 @@
 			clocks = <&clock CLK_PCLK_PPMU_DREX1_0>;
 			clock-names = "ppmu";
 			events {
-				ppmu_event3_dmc1_0: ppmu-event3-dmc1_0 {
-					event-name = "ppmu-event3-dmc1_0";
+				ppmu_event3_dmc1_0: ppmu-event3-dmc1-0 {
+					event-name = "ppmu-event3-dmc1-0";
 				};
 			};
 		};
@@ -338,8 +338,8 @@
 			clocks = <&clock CLK_PCLK_PPMU_DREX1_1>;
 			clock-names = "ppmu";
 			events {
-				ppmu_event3_dmc1_1: ppmu-event3-dmc1_1 {
-					event-name = "ppmu-event3-dmc1_1";
+				ppmu_event3_dmc1_1: ppmu-event3-dmc1-1 {
+					event-name = "ppmu-event3-dmc1-1";
 				};
 			};
 		};
@@ -430,60 +430,50 @@
 			power-domains = <&mau_pd>;
 		};
 
-		adma: adma@3880000 {
+		adma: dma-controller@3880000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x03880000 0x1000>;
 			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_audss EXYNOS_ADMA>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <6>;
-			#dma-requests = <16>;
 			power-domains = <&mau_pd>;
 		};
 
-		pdma0: pdma@121a0000 {
+		pdma0: dma-controller@121a0000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x121A0000 0x1000>;
 			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_PDMA0>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
 		};
 
-		pdma1: pdma@121b0000 {
+		pdma1: dma-controller@121b0000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x121B0000 0x1000>;
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_PDMA1>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
 		};
 
-		mdma0: mdma@10800000 {
+		mdma0: dma-controller@10800000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x10800000 0x1000>;
 			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_MDMA0>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <1>;
 		};
 
-		mdma1: mdma@11c10000 {
+		mdma1: dma-controller@11c10000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x11C10000 0x1000>;
 			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_MDMA1>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <1>;
 			/*
 			 * MDMA1 can support both secure and non-secure
 			 * AXI transactions. When this is enabled in
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
index e7958dbecfd2..35818c4cd852 100644
--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -333,8 +333,6 @@
 		compatible	= "samsung,K3QF2F20DB", "jedec,lpddr3";
 		density		= <16384>;
 		io-width	= <32>;
-		#address-cells	= <1>;
-		#size-cells	= <0>;
 
 		tRFC-min-tck		= <17>;
 		tRRD-min-tck		= <2>;
@@ -358,10 +356,9 @@
 		tCKESR-min-tck		= <2>;
 		tMRD-min-tck		= <5>;
 
-		timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@800000000 {
+		timings_samsung_K3QF2F20DB_800mhz: timings {
 			compatible	= "jedec,lpddr3-timings";
-			/* workaround: 'reg' shows max-freq */
-			reg		= <800000000>;
+			max-freq	= <800000000>;
 			min-freq	= <100000000>;
 			tRFC		= <65000>;
 			tRRD		= <6000>;
@@ -999,7 +996,7 @@
 };
 
 &pinctrl_0 {
-	s2mps11_irq: s2mps11-irq {
+	s2mps11_irq: s2mps11-irq-pins {
 		samsung,pins = "gpx0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos5422-odroidhc1.dts b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
index d91f7fa2cf80..3de7019572a2 100644
--- a/arch/arm/boot/dts/exynos5422-odroidhc1.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
@@ -8,6 +8,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/leds/common.h>
 #include "exynos5422-odroid-core.dtsi"
 
 / {
@@ -19,7 +20,8 @@
 		compatible = "pwm-leds";
 
 		led-1 {
-			label = "blue:heartbeat";
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_BLUE>;
 			pwms = <&pwm 2 2000000 0>;
 			pwm-names = "pwm2";
 			max-brightness = <255>;
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index e35af40a55cb..a6961ff24030 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -480,14 +480,14 @@
 };
 
 &pinctrl_0 {
-	power_key: power-key {
+	power_key: power-key-pins {
 		samsung,pins = "gpx0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	hdmi_hpd_irq: hdmi-hpd-irq {
+	hdmi_hpd_irq: hdmi-hpd-irq-pins {
 		samsung,pins = "gpx3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
@@ -496,7 +496,7 @@
 };
 
 &pinctrl_1 {
-	emmc_nrst_pin: emmc-nrst {
+	emmc_nrst_pin: emmc-nrst-pins {
 		samsung,pins = "gpd1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
index 62c5928aa994..e3154a1cae23 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
@@ -113,13 +113,13 @@
 	#size-cells = <0>;
 
 	hub@1 {
-		compatible = "usb0424,9514";
+		compatible = "usb424,9514";
 		reg = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ethernet: usbether@1 {
-			compatible = "usb0424,ec00";
+		ethernet: ethernet@1 {
+			compatible = "usb424,ec00";
 			reg = <1>;
 			local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */
 		};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
index cecaeb69e623..a378d4937ff7 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
@@ -80,13 +80,13 @@
 	#size-cells = <0>;
 
 	hub@1 {
-		compatible = "usb0424,9514";
+		compatible = "usb424,9514";
 		reg = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ethernet: usbether@1 {
-			compatible = "usb0424,ec00";
+		ethernet: ethernet@1 {
+			compatible = "usb424,ec00";
 			reg = <1>;
 			local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */
 		};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu4.dts b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
index 1c24f9b35973..f5fb617f46bd 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu4.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
@@ -9,6 +9,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/sound/samsung-i2s.h>
 #include "exynos5422-odroidxu3-common.dtsi"
 
@@ -21,7 +22,8 @@
 		compatible = "pwm-leds";
 
 		led-1 {
-			label = "blue:heartbeat";
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_BLUE>;
 			pwms = <&pwm 2 2000000 0>;
 			pwm-names = "pwm2";
 			max-brightness = <255>;
diff --git a/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
index 982752e1df24..8c0e1716c0b3 100644
--- a/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
+++ b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
@@ -9,6 +9,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
 
 / {
 	led-controller-1 {
@@ -16,6 +17,8 @@
 
 		led-1 {
 			label = "green:mmc0";
+			function = LED_FUNCTION_DISK_ACTIVITY;
+			color = <LED_COLOR_ID_GREEN>;
 			pwms = <&pwm 1 2000000 0>;
 			pwm-names = "pwm1";
 			/*
@@ -27,7 +30,8 @@
 		};
 
 		led-2 {
-			label = "blue:heartbeat";
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_BLUE>;
 			pwms = <&pwm 2 2000000 0>;
 			pwm-names = "pwm2";
 			max-brightness = <255>;
@@ -40,6 +44,8 @@
 
 		led-3 {
 			label = "red:microSD";
+			function = LED_FUNCTION_DISK_ACTIVITY;
+			color = <LED_COLOR_ID_RED>;
 			gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 			linux,default-trigger = "mmc1";
diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi
index 2ddb7a5f12b3..3ec43761d8b9 100644
--- a/arch/arm/boot/dts/exynos54xx.dtsi
+++ b/arch/arm/boot/dts/exynos54xx.dtsi
@@ -74,7 +74,8 @@
 		};
 
 		mct: timer@101c0000 {
-			compatible = "samsung,exynos4210-mct";
+			compatible = "samsung,exynos5420-mct",
+				     "samsung,exynos4210-mct";
 			reg = <0x101c0000 0xb00>;
 			interrupts-extended = <&combiner 23 3>,
 					      <&combiner 23 4>,
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 77013ee586f8..0ebcb66c6319 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -59,7 +59,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&power_key_irq &lid_irq>;
 
-		power {
+		power-key {
 			label = "Power";
 			gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
@@ -221,7 +221,7 @@
 		interrupts = <1 IRQ_TYPE_NONE>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&max77802_irq>, <&pmic_selb>,
-			    <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>;
+			    <&pmic_dvs_1>, <&pmic_dvs_2>;
 		wakeup-source;
 		reg = <0x9>;
 		#clock-cells = <1>;
@@ -756,14 +756,14 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mask_tpm_reset>;
 
-	wifi_en: wifi-en {
+	wifi_en: wifi-en-pins {
 		samsung,pins = "gpx0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	max98091_irq: max98091-irq {
+	max98091_irq: max98091-irq-pins {
 		samsung,pins = "gpx0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -771,7 +771,7 @@
 	};
 
 	/* We need GPX0_6 to be low at sleep time; just keep it low always */
-	mask_tpm_reset: mask-tpm-reset {
+	mask_tpm_reset: mask-tpm-reset-pins {
 		samsung,pins = "gpx0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -779,70 +779,70 @@
 		samsung,pin-val = <0>;
 	};
 
-	tpm_irq: tpm-irq {
+	tpm_irq: tpm-irq-pins {
 		samsung,pins = "gpx1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	trackpad_irq: trackpad-irq {
+	trackpad_irq: trackpad-irq-pins {
 		samsung,pins = "gpx1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	power_key_irq: power-key-irq {
+	power_key_irq: power-key-irq-pins {
 		samsung,pins = "gpx1-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	ec_irq: ec-irq {
+	ec_irq: ec-irq-pins {
 		samsung,pins = "gpx1-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	tps65090_irq: tps65090-irq {
+	tps65090_irq: tps65090-irq-pins {
 		samsung,pins = "gpx2-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	dp_hpd_gpio: dp_hpd_gpio {
+	dp_hpd_gpio: dp-hpd-gpio-pins {
 		samsung,pins = "gpx2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	max77802_irq: max77802-irq {
+	max77802_irq: max77802-irq-pins {
 		samsung,pins = "gpx3-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	lid_irq: lid-irq {
+	lid_irq: lid-irq-pins {
 		samsung,pins = "gpx3-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	hdmi_hpd_irq: hdmi-hpd-irq {
+	hdmi_hpd_irq: hdmi-hpd-irq-pins {
 		samsung,pins = "gpx3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pmic_dvs_1: pmic-dvs-1 {
+	pmic_dvs_1: pmic-dvs-1-pins {
 		samsung,pins = "gpy7-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -850,74 +850,67 @@
 	};
 };
 
-&pinctrl_1 {
-	/* Adjust WiFi drive strengths lower for EMI */
-	sd1_clk: sd1-clk {
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-	};
+/* pinctrl_1 */
+/* Adjust WiFi drive strengths lower for EMI */
+&sd1_bus1 {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
 
-	sd1_cmd: sd1-cmd {
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-	};
+&sd1_bus4 {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
 
-	sd1_bus1: sd1-bus-width1 {
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-	};
+&sd1_bus8 {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
 
-	sd1_bus4: sd1-bus-width4 {
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-	};
+&sd1_clk {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
 
-	sd1_bus8: sd1-bus-width8 {
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-	};
+&sd1_cmd {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 };
 
 &pinctrl_2 {
-	pmic_dvs_2: pmic-dvs-2 {
-		samsung,pins = "gpj4-2";
+	pmic_dvs_2: pmic-dvs-2-pins {
+		samsung,pins = "gpj4-2", "gpj4-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
+};
 
-	pmic_dvs_3: pmic-dvs-3 {
-		samsung,pins = "gpj4-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
+/* pinctrl_3*/
+/* Drive SPI lines at x2 for better integrity */
+&spi2_bus {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 };
 
 &pinctrl_3 {
-	/* Drive SPI lines at x2 for better integrity */
-	spi2-bus {
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-	};
-
 	/* Drive SPI chip select at x2 for better integrity */
-	ec_spi_cs: ec-spi-cs {
+	ec_spi_cs: ec-spi-cs-pins {
 		samsung,pins = "gpb1-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 
-	usb300_vbus_en: usb300-vbus-en {
+	usb300_vbus_en: usb300-vbus-en-pins {
 		samsung,pins = "gph0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	usb301_vbus_en: usb301-vbus-en {
+	usb301_vbus_en: usb301-vbus-en-pins {
 		samsung,pins = "gph0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pmic_selb: pmic-selb {
+	pmic_selb: pmic-selb-pins {
 		samsung,pins = "gph0-2", "gph0-3", "gph0-4", "gph0-5",
 			       "gph0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
@@ -1072,6 +1065,16 @@
 	vtmu-supply = <&ldo10_reg>;
 };
 
+&usbdrd3_0 {
+	vdd10-supply = <&ldo15_reg>;
+	vdd33-supply = <&ldo12_reg>;
+};
+
+&usbdrd3_1 {
+	vdd10-supply = <&ldo15_reg>;
+	vdd33-supply = <&ldo12_reg>;
+};
+
 &usbdrd_dwc3_0 {
 	dr_mode = "host";
 };
diff --git a/arch/arm/boot/dts/gemini-ns2502.dts b/arch/arm/boot/dts/gemini-ns2502.dts
index 704abd212df5..e6eeb35e8819 100644
--- a/arch/arm/boot/dts/gemini-ns2502.dts
+++ b/arch/arm/boot/dts/gemini-ns2502.dts
@@ -39,10 +39,6 @@
 		phy0: ethernet-phy@1 {
 			reg = <1>;
 			device_type = "ethernet-phy";
-			/* We lack the knowledge of necessary GPIO to achieve
-			 * Gigabit
-			 */
-			max-speed = <100>;
 		};
 	};
 };
@@ -50,7 +46,7 @@
 &ethernet {
 	status = "okay";
 	ethernet-port@0 {
-		phy-mode = "rgmii";
+		phy-mode = "rgmii-id";
 		phy-handle = <&phy0>;
 	};
 };
@@ -65,30 +61,9 @@
 	pinctrl-1 = <&pflash_disabled_pins>;
 
 	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "RedBoot";
-			reg = <0x00000000 0x00020000>;
-		};
-		partition@20000 {
-			label = "kernel";
-			reg = <0x00020000 0x00700000>;
-		};
-		partition@720000 {
-			label = "VCTL";
-			reg = <0x00720000 0x00020000>;
-		};
-		partition@740000 {
-			label = "CurConf";
-			reg = <0x00740000 0x000a0000>;
-		};
-		partition@7e0000 {
-			label = "FIS";
-			reg = <0x007e0000 0x00010000>;
-		};
+		compatible = "redboot-fis";
+		/* Eraseblock at 0x7e0000 */
+		fis-index-block = <0x3f>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/gemini-ssi1328.dts b/arch/arm/boot/dts/gemini-ssi1328.dts
index 2b3e7db84fed..42e85f07cf76 100644
--- a/arch/arm/boot/dts/gemini-ssi1328.dts
+++ b/arch/arm/boot/dts/gemini-ssi1328.dts
@@ -40,10 +40,6 @@
 		phy0: ethernet-phy@1 {
 			reg = <1>;
 			device_type = "ethernet-phy";
-			/* We lack the knowledge of necessary GPIO to achieve
-			 * Gigabit
-			 */
-			max-speed = <100>;
 		};
 		/* WAN ICPlus IP101A */
 		phy1: ethernet-phy@2 {
diff --git a/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts b/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts
new file mode 100644
index 000000000000..3a7382ce40ef
--- /dev/null
+++ b/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for HPE DL360Gen10
+ */
+
+/include/ "hpe-gxp.dtsi"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "hpe,gxp-dl360gen10", "hpe,gxp";
+	model = "Hewlett Packard Enterprise ProLiant dl360 Gen10";
+
+	aliases {
+		serial0 = &uartc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x20000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/hpe-gxp.dtsi b/arch/arm/boot/dts/hpe-gxp.dtsi
new file mode 100644
index 000000000000..cf735b3c4f35
--- /dev/null
+++ b/arch/arm/boot/dts/hpe-gxp.dtsi
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for HPE GXP
+ */
+
+/dts-v1/;
+/ {
+	model = "Hewlett Packard Enterprise GXP BMC";
+	compatible = "hpe,gxp";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			device_type = "cpu";
+			next-level-cache = <&L2>;
+		};
+	};
+
+	clocks {
+		pll: clock-0 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1600000000>;
+		};
+
+		iopclk: clock-1 {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <4>;
+			clock-mult = <1>;
+			clocks = <&pll>;
+		};
+	};
+
+	axi {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		dma-ranges;
+
+		L2: cache-controller@b0040000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xb0040000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		ahb@c0000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc0000000 0x30000000>;
+			dma-ranges;
+
+			vic0: interrupt-controller@eff0000 {
+				compatible = "arm,pl192-vic";
+				reg = <0xeff0000 0x1000>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+
+			vic1: interrupt-controller@80f00000 {
+				compatible = "arm,pl192-vic";
+				reg = <0x80f00000 0x1000>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+
+			uarta: serial@e0 {
+				compatible = "ns16550a";
+				reg = <0xe0 0x8>;
+				interrupts = <17>;
+				interrupt-parent = <&vic0>;
+				clock-frequency = <1846153>;
+				reg-shift = <0>;
+			};
+
+			uartb: serial@e8 {
+				compatible = "ns16550a";
+				reg = <0xe8 0x8>;
+				interrupts = <18>;
+				interrupt-parent = <&vic0>;
+				clock-frequency = <1846153>;
+				reg-shift = <0>;
+			};
+
+			uartc: serial@f0 {
+				compatible = "ns16550a";
+				reg = <0xf0 0x8>;
+				interrupts = <19>;
+				interrupt-parent = <&vic0>;
+				clock-frequency = <1846153>;
+				reg-shift = <0>;
+			};
+
+			usb0: usb@efe0000 {
+				compatible = "hpe,gxp-ehci", "generic-ehci";
+				reg = <0xefe0000 0x100>;
+				interrupts = <7>;
+				interrupt-parent = <&vic0>;
+			};
+
+			st: timer@80 {
+				compatible = "hpe,gxp-timer";
+				reg = <0x80 0x16>;
+				interrupts = <0>;
+				interrupt-parent = <&vic0>;
+				clocks = <&iopclk>;
+				clock-names = "iop";
+			};
+
+			usb1: usb@efe0100 {
+				compatible = "hpe,gxp-ohci", "generic-ohci";
+				reg = <0xefe0100 0x110>;
+				interrupts = <6>;
+				interrupt-parent = <&vic0>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts
index 8cbaf1c81174..3b609d987d88 100644
--- a/arch/arm/boot/dts/imx23-evk.dts
+++ b/arch/arm/boot/dts/imx23-evk.dts
@@ -79,7 +79,6 @@
 						MX23_PAD_LCD_RESET__GPIO_1_18
 						MX23_PAD_PWM3__GPIO_1_29
 						MX23_PAD_PWM4__GPIO_1_30
-						MX23_PAD_SSP1_DETECT__SSP1_DETECT
 					>;
 					fsl,drive-strength = <MXS_DRIVE_4mA>;
 					fsl,voltage = <MXS_VOLTAGE_HIGH>;
diff --git a/arch/arm/boot/dts/imx23-pinfunc.h b/arch/arm/boot/dts/imx23-pinfunc.h
index 5c0f32ca3a93..468c079f3c2b 100644
--- a/arch/arm/boot/dts/imx23-pinfunc.h
+++ b/arch/arm/boot/dts/imx23-pinfunc.h
@@ -1,14 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Header providing constants for i.MX23 pinctrl bindings.
  *
  * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 #ifndef __DT_BINDINGS_MX23_PINCTRL_H__
diff --git a/arch/arm/boot/dts/imx23-xfi3.dts b/arch/arm/boot/dts/imx23-xfi3.dts
index a6213c590f94..b1d8210f3ecc 100644
--- a/arch/arm/boot/dts/imx23-xfi3.dts
+++ b/arch/arm/boot/dts/imx23-xfi3.dts
@@ -158,19 +158,19 @@
 		default-brightness-level = <6>;
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&key_pins_a>;
 
-		voldown {
+		key-voldown {
 			label = "volume-down";
 			linux,code = <114>;
 			gpios = <&gpio2 7 0>;
 			debounce-interval = <20>;
 		};
 
-		volup {
+		key-volup {
 			label = "volume-up";
 			linux,code = <115>;
 			gpios = <&gpio2 8 0>;
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
index 3f38c2e60a74..c7207ea437c4 100644
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
@@ -13,12 +13,12 @@
 	model = "Eukrea MBIMXSD25";
 	compatible = "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpiokeys>;
 
-		bp1 {
+		button {
 			label = "BP1";
 			gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_MISC>;
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index fa8044c21cb8..5f90d72b840b 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -68,7 +68,7 @@
 		};
 	};
 
-	soc {
+	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
@@ -515,7 +515,7 @@
 				#interrupt-cells = <2>;
 			};
 
-			sdma: sdma@53fd4000 {
+			sdma: dma-controller@53fd4000 {
 				compatible = "fsl,imx25-sdma";
 				reg = <0x53fd4000 0x4000>;
 				clocks = <&clks 112>, <&clks 68>;
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index fd525c3b16fa..e140307be2e7 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -74,14 +74,14 @@
 		};
 	};
 
-	soc {
+	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
 		interrupt-parent = <&aitc>;
 		ranges;
 
-		aipi@10000000 { /* AIPI1 */
+		aipi1: aipi@10000000 { /* AIPI1 */
 			compatible = "fsl,aipi-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -96,7 +96,7 @@
 					 <&clks IMX27_CLK_DMA_AHB_GATE>;
 				clock-names = "ipg", "ahb";
 				#dma-cells = <1>;
-				#dma-channels = <16>;
+				dma-channels = <16>;
 			};
 
 			wdog: watchdog@10002000 {
@@ -453,7 +453,7 @@
 			};
 		};
 
-		aipi@10020000 { /* AIPI2 */
+		aipi2: aipi@10020000 { /* AIPI2 */
 			compatible = "fsl,aipi-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts
index a92b05ef390f..9ef0d567ea48 100644
--- a/arch/arm/boot/dts/imx28-cfa10049.dts
+++ b/arch/arm/boot/dts/imx28-cfa10049.dts
@@ -327,7 +327,7 @@
 		};
 	};
 
-	spi2 {
+	spi-2 {
 		compatible = "spi-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi2_pins_cfa10049>;
@@ -351,7 +351,7 @@
 		};
 	};
 
-	spi3 {
+	spi-3 {
 		compatible = "spi-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi3_pins_cfa10049>;
@@ -388,12 +388,12 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&rotary_btn_pins_cfa10049>;
 
-		rotary_button {
+		rotary-button {
 			label = "rotary_button";
 			gpios = <&gpio3 26 1>;
 			debounce-interval = <10>;
diff --git a/arch/arm/boot/dts/imx28-cfa10055.dts b/arch/arm/boot/dts/imx28-cfa10055.dts
index d05c370dfc17..fac5bbda7a93 100644
--- a/arch/arm/boot/dts/imx28-cfa10055.dts
+++ b/arch/arm/boot/dts/imx28-cfa10055.dts
@@ -129,7 +129,7 @@
 		};
 	};
 
-	spi2 {
+	spi-2 {
 		compatible = "spi-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi2_pins_cfa10055>;
diff --git a/arch/arm/boot/dts/imx28-cfa10056.dts b/arch/arm/boot/dts/imx28-cfa10056.dts
index c1060bd5f17f..c5f3337e8b39 100644
--- a/arch/arm/boot/dts/imx28-cfa10056.dts
+++ b/arch/arm/boot/dts/imx28-cfa10056.dts
@@ -88,7 +88,7 @@
 		};
 	};
 
-	spi2 {
+	spi-2 {
 		compatible = "spi-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi2_pins_cfa10056>;
diff --git a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts
index bacb846f99e3..73f521c46c1e 100644
--- a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts
+++ b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts
@@ -204,7 +204,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&enocean_button>;
 
-		enocean {
+		key-enocean {
 			label = "EnOcean";
 			linux,code = <KEY_NEW>;
 			gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi
index 3280fddaaf0d..b285a946e2c2 100644
--- a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi
+++ b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi
@@ -19,12 +19,12 @@
 		default-brightness-level = <10>;
 	};
 
-	button-sw3 {
+	gpio-keys-0 {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&gpio_button_sw3_pins_mbmx28lc>;
 
-		sw3 {
+		switch-sw3 {
 			label = "SW3";
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_MISC>;
@@ -32,12 +32,12 @@
 		};
 	};
 
-	button-sw4 {
+	gpio-keys-1 {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&gpio_button_sw4_pins_mbmx28lc>;
 
-		sw4 {
+		switch-sw4 {
 			label = "SW4";
 			gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_MISC>;
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index 7e2b0f198dfa..1053b7c584d8 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -129,7 +129,7 @@
 				pinctrl-0 = <&spi2_pins_a>;
 				status = "okay";
 
-				flash: m25p80@0 {
+				flash: flash@0 {
 					#address-cells = <1>;
 					#size-cells = <1>;
 					compatible = "sst,sst25vf016b", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
index f3bddc5ada4b..13acdc7916b9 100644
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -33,7 +33,7 @@
 				pinctrl-0 = <&spi2_pins_a>;
 				status = "okay";
 
-				flash: m25p80@0 {
+				flash: flash@0 {
 					#address-cells = <1>;
 					#size-cells = <1>;
 					compatible = "m25p80", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/imx28-pinfunc.h b/arch/arm/boot/dts/imx28-pinfunc.h
index e11f69ba0fe4..d427e6c2fa78 100644
--- a/arch/arm/boot/dts/imx28-pinfunc.h
+++ b/arch/arm/boot/dts/imx28-pinfunc.h
@@ -1,14 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Header providing constants for i.MX28 pinctrl bindings.
  *
  * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 #ifndef __DT_BINDINGS_MX28_PINCTRL_H__
diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts
index 43be7a6a769b..90928db0df70 100644
--- a/arch/arm/boot/dts/imx28-sps1.dts
+++ b/arch/arm/boot/dts/imx28-sps1.dts
@@ -51,7 +51,7 @@
 				pinctrl-0 = <&spi2_pins_a>;
 				status = "okay";
 
-				flash: m25p80@0 {
+				flash: flash@0 {
 					#address-cells = <1>;
 					#size-cells = <1>;
 					compatible = "everspin,mr25h256", "mr25h256";
diff --git a/arch/arm/boot/dts/imx28-ts4600.dts b/arch/arm/boot/dts/imx28-ts4600.dts
index 097ec35c62d8..0d58da1c0cc5 100644
--- a/arch/arm/boot/dts/imx28-ts4600.dts
+++ b/arch/arm/boot/dts/imx28-ts4600.dts
@@ -26,7 +26,7 @@
 				pinctrl-0 = <&mmc0_4bit_pins_a
 					     &mmc0_sck_cfg
 					     &en_sd_pwr>;
-				broken-cd = <1>;
+				broken-cd;
 				bus-width = <4>;
 				vmmc-supply = <&reg_vddio_sd0>;
 				status = "okay";
diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
index 9e5651c7ea6b..096f246032c6 100644
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -221,7 +221,7 @@
 		linux,no-autorepeat;
 	};
 
-	spi_gpio: spi-gpio {
+	spi_gpio: spi {
 		compatible = "spi-gpio";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -338,7 +338,7 @@
 	};
 
 	ds1339: rtc@68 {
-		compatible = "mxim,ds1339";
+		compatible = "dallas,ds1339";
 		reg = <0x68>;
 		trickle-resistor-ohms = <250>;
 		trickle-diode-disable;
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 84d0176d5193..130b4145af82 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -110,6 +110,8 @@
 				interrupt-names = "bch";
 				clocks = <&clks 50>;
 				clock-names = "gpmi_io";
+				assigned-clocks = <&clks 13>;
+				assigned-clock-parents = <&clks 10>;
 				dmas = <&dma_apbh 4>;
 				dma-names = "rx-tx";
 				status = "disabled";
diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi
index 2adb923c0b27..95c05f17a6d5 100644
--- a/arch/arm/boot/dts/imx31.dtsi
+++ b/arch/arm/boot/dts/imx31.dtsi
@@ -48,7 +48,7 @@
 		reg = <0x68000000 0x100000>;
 	};
 
-	soc {
+	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
@@ -63,7 +63,7 @@
 			ranges = <0 0x1fffc000 0x4000>;
 		};
 
-		bus@43f00000 { /* AIPS1 */
+		aips1: bus@43f00000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -297,7 +297,7 @@
 				#interrupt-cells = <2>;
 			};
 
-			sdma: sdma@53fd4000 {
+			sdma: dma-controller@53fd4000 {
 				compatible = "fsl,imx31-sdma";
 				reg = <0x53fd4000 0x4000>;
 				interrupts = <34>;
diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
index b1c11170ac25..7f4f812b0811 100644
--- a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
+++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
@@ -13,12 +13,12 @@
 	model = "Eukrea CPUIMX35";
 	compatible = "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35";
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_bp1>;
 
-		bp1 {
+		button {
 			label = "BP1";
 			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_MISC>;
diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi
index 8e41c8b7bd70..d650f54c3fc6 100644
--- a/arch/arm/boot/dts/imx35.dtsi
+++ b/arch/arm/boot/dts/imx35.dtsi
@@ -284,7 +284,7 @@
 				#interrupt-cells = <2>;
 			};
 
-			sdma: sdma@53fd4000 {
+			sdma: dma-controller@53fd4000 {
 				compatible = "fsl,imx35-sdma";
 				reg = <0x53fd4000 0x4000>;
 				clocks = <&clks 9>, <&clks 65>;
diff --git a/arch/arm/boot/dts/imx50-kobo-aura.dts b/arch/arm/boot/dts/imx50-kobo-aura.dts
index 82ce8c43be86..51bf6117fb12 100644
--- a/arch/arm/boot/dts/imx50-kobo-aura.dts
+++ b/arch/arm/boot/dts/imx50-kobo-aura.dts
@@ -38,20 +38,20 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpiokeys>;
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 		};
 
-		hallsensor {
+		event-hallsensor {
 			label = "Hallsensor";
 			gpios = <&gpio5 15 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_RESERVED>;
 			linux,input-type = <EV_SW>;
 		};
 
-		frontlight {
+		event-frontlight {
 			label = "Frontlight";
 			gpios = <&gpio4 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_DISPLAYTOGGLE>;
diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi
index be0de0fd31f9..3d9a9f37f672 100644
--- a/arch/arm/boot/dts/imx50.dtsi
+++ b/arch/arm/boot/dts/imx50.dtsi
@@ -94,14 +94,14 @@
 		status = "okay";
 	};
 
-	soc {
+	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
 		interrupt-parent = <&tzic>;
 		ranges;
 
-		bus@50000000 { /* AIPS1 */
+		aips1: bus@50000000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -385,7 +385,7 @@
 			};
 		};
 
-		bus@60000000 {	/* AIPS2 */
+		aips2: bus@60000000 {	/* AIPS2 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -421,7 +421,7 @@
 				status = "disabled";
 			};
 
-			sdma: sdma@63fb0000 {
+			sdma: dma-controller@63fb0000 {
 				compatible = "fsl,imx50-sdma", "fsl,imx35-sdma";
 				reg = <0x63fb0000 0x4000>;
 				interrupts = <6>;
diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts
index c66f274ba4e9..b61d55ca1467 100644
--- a/arch/arm/boot/dts/imx51-apf51dev.dts
+++ b/arch/arm/boot/dts/imx51-apf51dev.dts
@@ -63,7 +63,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		user {
+		led-user {
 			label = "Heartbeat";
 			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index 552196d8a60a..a1f9c6a72275 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -154,7 +154,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_POWER>;
diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts b/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts
index aab8d6f137c3..10cae7c3a879 100644
--- a/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts
+++ b/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts
@@ -13,6 +13,13 @@
 	chosen {
 		stdout-path = &uart1;
 	};
+
+	usbphy1: usbphy1 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
+	};
 };
 
 &esdhc1 {
@@ -63,6 +70,7 @@
 &usbh1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbh1>;
+	fsl,usbphy = <&usbphy1>;
 	dr_mode = "host";
 	phy_type = "ulpi";
 	disable-over-current;
diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi
index 7d4970417dce..f0809a16a2ce 100644
--- a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi
+++ b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi
@@ -34,22 +34,22 @@
 
 		regulators {
 			sw1_reg: sw1 {
-				regulator-min-microvolt = <1000000>;
+				regulator-min-microvolt = <1050000>;
 				regulator-max-microvolt = <1100000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
 			sw2_reg: sw2 {
-				regulator-min-microvolt = <1225000>;
-				regulator-max-microvolt = <1225000>;
+				regulator-min-microvolt = <1175000>;
+				regulator-max-microvolt = <1275000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
 			sw3_reg: sw3 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
+				regulator-min-microvolt = <1150000>;
+				regulator-max-microvolt = <1350000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
@@ -102,18 +102,6 @@
 				regulator-always-on;
 			};
 
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <3150000>;
-				regulator-max-microvolt = <3150000>;
-				regulator-always-on;
-			};
-
 			vgen3_reg: vgen3 {
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -124,8 +112,6 @@
 				regulator-always-on;
 			};
 
-			gpo1_reg: gpo1 { };
-
 			gpo2_reg: gpo2 { };
 
 			gpo3_reg: gpo3 { };
@@ -198,6 +184,7 @@
 &usbotg {
 	phy_type = "utmi_wide";
 	disable-over-current;
+	vbus-supply = <&swbst_reg>;
 	/* Device role is not known, keep status disabled */
 };
 
diff --git a/arch/arm/boot/dts/imx51-ts4800.dts b/arch/arm/boot/dts/imx51-ts4800.dts
index 6ecb83e7f336..f7408722d68a 100644
--- a/arch/arm/boot/dts/imx51-ts4800.dts
+++ b/arch/arm/boot/dts/imx51-ts4800.dts
@@ -102,7 +102,7 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	rtc: m41t00@68 {
+	rtc: rtc@68 {
 		compatible = "st,m41t00";
 		reg = <0x68>;
 	};
@@ -174,7 +174,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_interrupt_fpga>;
 			interrupt-parent = <&gpio2>;
-			interrupts= <9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
 		};
diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts
index ec8ca3ac2c1c..3140f038aa98 100644
--- a/arch/arm/boot/dts/imx51-zii-rdu1.dts
+++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts
@@ -137,7 +137,7 @@
 		};
 	};
 
-	spi_gpio: spi-gpio {
+	spi_gpio: spi {
 		compatible = "spi-gpio";
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 56c8d87864c3..853707574d2e 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -114,7 +114,7 @@
 		ports = <&ipu_di0>, <&ipu_di1>;
 	};
 
-	soc {
+	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
@@ -171,7 +171,7 @@
 			};
 		};
 
-		bus@70000000 { /* AIPS1 */
+		aips1: bus@70000000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -215,6 +215,8 @@
 					clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
 						 <&clks IMX5_CLK_UART3_PER_GATE>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 43 5 1>, <&sdma 44 5 2>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
@@ -426,6 +428,8 @@
 				clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
 					 <&clks IMX5_CLK_UART1_PER_GATE>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma 18 4 1>, <&sdma 19 4 2>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -436,6 +440,8 @@
 				clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
 					 <&clks IMX5_CLK_UART2_PER_GATE>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma 16 4 1>, <&sdma 17 4 2>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -454,7 +460,7 @@
 			};
 		};
 
-		bus@80000000 {	/* AIPS2 */
+		aips2: bus@80000000 {	/* AIPS2 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -498,7 +504,7 @@
 				status = "disabled";
 			};
 
-			sdma: sdma@83fb0000 {
+			sdma: dma-controller@83fb0000 {
 				compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
 				reg = <0x83fb0000 0x4000>;
 				interrupts = <6>;
diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts
index 6208fbb2e741..23a7492e2929 100644
--- a/arch/arm/boot/dts/imx53-ard.dts
+++ b/arch/arm/boot/dts/imx53-ard.dts
@@ -61,34 +61,34 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		home {
+		key-home {
 			label = "Home";
 			gpios = <&gpio5 10 0>;
 			linux,code = <KEY_HOME>;
 			wakeup-source;
 		};
 
-		back {
+		key-back {
 			label = "Back";
 			gpios = <&gpio5 11 0>;
 			linux,code = <KEY_BACK>;
 			wakeup-source;
 		};
 
-		program {
+		key-program {
 			label = "Program";
 			gpios = <&gpio5 12 0>;
 			linux,code = <KEY_PROGRAM >;
 			wakeup-source;
 		};
 
-		volume-up {
+		key-volume-up {
 			label = "Volume Up";
 			gpios = <&gpio5 13 0>;
 			linux,code = <KEY_VOLUMEUP>;
 		};
 
-		volume-down {
+		key-volume-down {
 			label = "Volume Down";
 			gpios = <&gpio4 0 0>;
 			linux,code = <KEY_VOLUMEDOWN>;
diff --git a/arch/arm/boot/dts/imx53-m53menlo.dts b/arch/arm/boot/dts/imx53-m53menlo.dts
index 4f88e96d81dd..d5c68d1ea707 100644
--- a/arch/arm/boot/dts/imx53-m53menlo.dts
+++ b/arch/arm/boot/dts/imx53-m53menlo.dts
@@ -53,6 +53,31 @@
 		};
 	};
 
+	lvds-decoder {
+		compatible = "ti,ds90cf364a", "lvds-decoder";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_decoder_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_decoder_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+
 	panel {
 		compatible = "edt,etm0700g0dh6";
 		pinctrl-0 = <&pinctrl_display_gpio>;
@@ -61,7 +86,7 @@
 
 		port {
 			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
+				remote-endpoint = <&lvds_decoder_out>;
 			};
 		};
 	};
@@ -450,7 +475,7 @@
 			reg = <2>;
 
 			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
+				remote-endpoint = <&lvds_decoder_in>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
index fe4244044a0f..50fef8dd3675 100644
--- a/arch/arm/boot/dts/imx53-qsb-common.dtsi
+++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi
@@ -45,20 +45,20 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 		};
 
-		volume-up {
+		key-volume-up {
 			label = "Volume Up";
 			gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
 			wakeup-source;
 		};
 
-		volume-down {
+		key-volume-down {
 			label = "Volume Down";
 			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
@@ -71,7 +71,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pin_gpio7_7>;
 
-		user {
+		led-user {
 			label = "Heartbeat";
 			gpios = <&gpio7 7 0>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts
index 9be44e807188..f8d17967a67e 100644
--- a/arch/arm/boot/dts/imx53-smd.dts
+++ b/arch/arm/boot/dts/imx53-smd.dts
@@ -19,13 +19,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		volume-up {
+		key-volume-up {
 			label = "Volume Up";
 			gpios = <&gpio2 14 0>;
 			linux,code = <KEY_VOLUMEUP>;
 		};
 
-		volume-down {
+		key-volume-down {
 			label = "Volume Down";
 			gpios = <&gpio2 15 0>;
 			linux,code = <KEY_VOLUMEDOWN>;
diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi
index 81c2726a328a..892dd1a4bac3 100644
--- a/arch/arm/boot/dts/imx53-tx53.dtsi
+++ b/arch/arm/boot/dts/imx53-tx53.dtsi
@@ -81,7 +81,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_key>;
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
 			linux,code = <116>; /* KEY_POWER */
@@ -241,7 +241,7 @@
 	clock-frequency = <400000>;
 	status = "okay";
 
-	rtc1: ds1339@68 {
+	rtc1: rtc@68 {
 		compatible = "dallas,ds1339";
 		reg = <0x68>;
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 67487f3caee1..56b3c13f4eb7 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -132,7 +132,7 @@
 		status = "okay";
 	};
 
-	soc {
+	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
@@ -222,7 +222,7 @@
 			clock-names = "core_clk", "mem_iface_clk";
 		};
 
-		bus@50000000 { /* AIPS1 */
+		aips1: bus@50000000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -655,7 +655,7 @@
 			};
 		};
 
-		bus@60000000 {	/* AIPS2 */
+		aips2: bus@60000000 {	/* AIPS2 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -710,7 +710,7 @@
 				status = "disabled";
 			};
 
-			sdma: sdma@63fb0000 {
+			sdma: dma-controller@63fb0000 {
 				compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
 				reg = <0x63fb0000 0x4000>;
 				interrupts = <6>;
diff --git a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
index d9de9b4f0c52..d477a937b47a 100644
--- a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
+++ b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
@@ -6,7 +6,7 @@
 	keyboard {
 		compatible = "gpio-keys";
 
-		btn0 {
+		button-0 {
 			gpios = <&pcf8575 0 GPIO_ACTIVE_LOW>;
 			label = "btn0";
 			linux,code = <KEY_WAKEUP>;
@@ -14,7 +14,7 @@
 			wakeup-source;
 		};
 
-		btn1 {
+		button-1 {
 			gpios = <&pcf8575 1 GPIO_ACTIVE_LOW>;
 			label = "btn1";
 			linux,code = <KEY_WAKEUP>;
@@ -22,7 +22,7 @@
 			wakeup-source;
 		};
 
-		btn2 {
+		button-2 {
 			gpios = <&pcf8575 2 GPIO_ACTIVE_LOW>;
 			label = "btn2";
 			linux,code = <KEY_WAKEUP>;
@@ -30,7 +30,7 @@
 			wakeup-source;
 		};
 
-		btn3 {
+		button-3 {
 			gpios = <&pcf8575 3 GPIO_ACTIVE_LOW>;
 			label = "btn3";
 			linux,code = <KEY_WAKEUP>;
diff --git a/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi b/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi
index ec5b66453156..337db29b0010 100644
--- a/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi
+++ b/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi
@@ -188,7 +188,7 @@
 	rotary-encoder-key {
 		compatible = "gpio-keys";
 
-		rotary-encoder-press {
+		rotary-encoder-event {
 			label = "rotary-encoder press";
 			gpios = <&tca6424a 0 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_ENTER>;
diff --git a/arch/arm/boot/dts/imx6dl-colibri-aster.dts b/arch/arm/boot/dts/imx6dl-colibri-aster.dts
new file mode 100644
index 000000000000..74e8a6cd8bed
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-colibri-aster.dts
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6dl.dtsi"
+#include "imx6qdl-colibri.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6DL/S on Colibri Aster Board";
+	compatible = "toradex,colibri_imx6dl-aster", "toradex,colibri_imx6dl",
+		     "fsl,imx6dl";
+
+	aliases {
+		i2c0 = &i2c2;
+		i2c1 = &i2c3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+/* Colibri SSP */
+&ecspi4 {
+	cs-gpios = <
+		&gpio5 2 GPIO_ACTIVE_HIGH
+		&gpio5 4 GPIO_ACTIVE_HIGH
+	>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi4 &pinctrl_csi_gpio_2>;
+	status = "okay";
+};
+
+/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */
+&i2c3 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&pinctrl_csi_gpio_1
+		&pinctrl_gpio_2
+		&pinctrl_gpio_aster
+		&pinctrl_usbh_oc_1
+		&pinctrl_usbc_id_1
+		&pinctrl_weim_gpio_5
+	>;
+
+	pinctrl_gpio_aster: gpioaster {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
+			MX6QDL_PAD_NANDF_D6__GPIO2_IO06		0x1b0b0
+			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08		0x1b0b0
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11		0x1b0b0
+		>;
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&reg_usb_host_vbus {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_host_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
+/* Colibri MMC */
+&usdhc1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
index 7da74e6f46d9..7272edd85a49 100644
--- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2014-2020 Toradex
+ * Copyright 2014-2022 Toradex
  * Copyright 2012 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
  */
@@ -17,12 +17,6 @@
 	compatible = "toradex,colibri_imx6dl-eval-v3", "toradex,colibri_imx6dl",
 		     "fsl,imx6dl";
 
-	/* Will be filled by the bootloader */
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0>;
-	};
-
 	aliases {
 		i2c0 = &i2c2;
 		i2c1 = &i2c3;
@@ -44,67 +38,6 @@
 		clock-frequency = <16000000>;
 		clock-output-names = "clk16m";
 	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		wakeup {
-			label = "Wake-Up";
-			gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* SODIMM 45 */
-			linux,code = <KEY_WAKEUP>;
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-	};
-
-	lcd_display: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "bgr666";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-
-			lcd_display_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
-
-	panel: panel {
-		/*
-		 * edt,et057090dhu: EDT 5.7" LCD TFT
-		 * edt,et070080dh6: EDT 7.0" LCD TFT
-		 */
-		compatible = "edt,et057090dhu";
-		backlight = <&backlight>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-};
-
-&backlight {
-	brightness-levels = <0 127 191 223 239 247 251 255>;
-	default-brightness-level = <1>;
-	status = "okay";
 };
 
 /* Colibri SSP */
@@ -113,40 +46,21 @@
 
 	mcp251x0: mcp251x@0 {
 		compatible = "microchip,mcp2515";
-		reg = <0>;
 		clocks = <&clk16m>;
 		interrupt-parent = <&gpio3>;
 		interrupts = <27 0x2>;
+		reg = <0>;
 		spi-max-frequency = <10000000>;
 		status = "okay";
 	};
 };
 
-&hdmi {
-	status = "okay";
-};
-
 /*
  * Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board)
  */
 &i2c3 {
 	status = "okay";
 
-	/*
-	 * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>,
-	 * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms
-	 */
-	touchscreen@4a {
-		compatible = "atmel,maxtouch";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pcap_1>;
-		reg = <0x4a>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;		/* SODIMM 28 */
-		reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;	/* SODIMM 30 */
-		status = "disabled";
-	};
-
 	/* M41T0M6 real time clock on carrier board */
 	rtc_i2c: rtc@68 {
 		compatible = "st,m41t0";
@@ -162,24 +76,6 @@
 		&pinctrl_weim_gpio_5 &pinctrl_weim_gpio_6
 		&pinctrl_usbh_oc_1 &pinctrl_usbc_id_1
 	>;
-
-	pinctrl_pcap_1: pcap1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0 /* SODIMM 28 */
-			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10	0x1b0b0 /* SODIMM 30 */
-		>;
-	};
-
-	pinctrl_mxt_ts: mxttsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_CS1__GPIO2_IO24	0x130b0 /* SODIMM 107 */
-			MX6QDL_PAD_SD2_DAT1__GPIO1_IO14	0x130b0 /* SODIMM 106 */
-		>;
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&lcd_display_in>;
 };
 
 &pwm1 {
diff --git a/arch/arm/boot/dts/imx6dl-colibri-iris-v2.dts b/arch/arm/boot/dts/imx6dl-colibri-iris-v2.dts
new file mode 100644
index 000000000000..3a6d3889760d
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-colibri-iris-v2.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6dl-colibri-iris.dts"
+
+/ {
+	model = "Toradex Colibri iMX6DL/S on Colibri Iris V2 Board";
+	compatible = "toradex,colibri_imx6dl-iris-v2", "toradex,colibri_imx6dl",
+		     "fsl,imx6dl";
+
+	reg_3v3_vmmc: regulator-3v3-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_3v3_vmmc>;
+		regulator-name = "3v3_vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <100>;
+		enable-active-high;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_iris	&pinctrl_usbh_oc_1 &pinctrl_usbc_id_1>;
+
+	pinctrl_enable_3v3_vmmc: enable3v3vmmcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11	0x1b0b0
+		>;
+	};
+};
+
+/* Colibri MMC */
+&usdhc1 {
+	cap-power-off-card;
+	/* uncomment the following to enable SD card UHS mode if you have a V1.1 module */
+	/* /delete-property/ no-1-8-v; */
+	vmmc-supply = <&reg_3v3_vmmc>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-colibri-iris.dts b/arch/arm/boot/dts/imx6dl-colibri-iris.dts
new file mode 100644
index 000000000000..cf77d894f6d7
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-colibri-iris.dts
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6dl.dtsi"
+#include "imx6qdl-colibri.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6DL/S on Colibri Iris Board";
+	compatible = "toradex,colibri_imx6dl-iris", "toradex,colibri_imx6dl",
+		     "fsl,imx6dl";
+
+	aliases {
+		i2c0 = &i2c2;
+		i2c1 = &i2c3;
+	};
+
+	aliases {
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+/* Colibri SSP */
+&ecspi4 {
+	status = "okay";
+};
+
+&gpio2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_forceoff &pinctrl_uart23_forceoff>;
+
+	/*
+	 * uart-a-on-x13-enable turns the UART transceiver for UART_A on. If one
+	 * wants to turn the transceiver off, that property has to be deleted
+	 * and the gpio handled in userspace.
+	 * The same applies to uart-b-c-on-x14-enable where the UART_B and
+	 * UART_C transceiver is turned on.
+	 */
+	uart-a-on-x13-enable-hog {
+		gpio-hog;
+		gpios = <4 GPIO_ACTIVE_HIGH>; /* SODIMM 102 */
+		output-high;
+	};
+
+	uart-b-c-on-x14-enable-hog {
+		gpio-hog;
+		gpios = <8 GPIO_ACTIVE_HIGH>; /* SODIMM 104 */
+		output-high;
+	};
+};
+
+/*
+ * Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board)
+ */
+&i2c3 {
+	status = "okay";
+
+	rtc_i2c: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&pinctrl_gpio_iris
+		&pinctrl_usbh_oc_1
+		&pinctrl_usbc_id_1
+	>;
+
+	pinctrl_gpio_iris: gpioirisgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21	0x1b0b0
+			MX6QDL_PAD_EIM_A18__GPIO2_IO20	0x1b0b0
+			MX6QDL_PAD_EIM_A19__GPIO2_IO19	0x1b0b0
+			MX6QDL_PAD_EIM_A20__GPIO2_IO18	0x1b0b0
+			MX6QDL_PAD_EIM_A23__GPIO6_IO06	0x1b0b0
+			MX6QDL_PAD_EIM_D27__GPIO3_IO27	0x1b0b0
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03	0x1b0b0
+			MX6QDL_PAD_SD2_DAT0__GPIO1_IO15	0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1_forceoff: uart1forceoffgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart23_forceoff: uart23forceoffgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0
+		>;
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&reg_usb_host_vbus {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_host_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
+/* Colibri MMC */
+&usdhc1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts
deleted file mode 100644
index 223275f028f1..000000000000
--- a/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/*
- * Copyright 2020 Toradex
- */
-
-/dts-v1/;
-
-#include "imx6dl-colibri-eval-v3.dts"
-#include "imx6qdl-colibri-v1_1-uhs.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX6DL/S V1.1 on Colibri Evaluation Board V3";
-	compatible = "toradex,colibri_imx6dl-v1_1-eval-v3",
-		     "toradex,colibri_imx6dl-v1_1",
-		     "toradex,colibri_imx6dl-eval-v3",
-		     "toradex,colibri_imx6dl",
-		     "fsl,imx6dl";
-};
-
-/* Colibri MMC */
-&usdhc1 {
-	status = "okay";
-	/*
-	 * Please make sure your carrier board does not pull-up any of
-	 * the MMC/SD signals to 3.3 volt before attempting to activate
-	 * UHS-I support.
-	 * To let signaling voltage be changed to 1.8V, please
-	 * delete no-1-8-v property (example below):
-	 * /delete-property/no-1-8-v;
-	 */
-};
diff --git a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts
index b4a9523e325b..864dc5018451 100644
--- a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts
+++ b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts
@@ -297,7 +297,11 @@
 	phy-mode = "rmii";
 	phy-reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
 	phy-handle = <&phy>;
-	clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&rmii_clk>;
+	clocks = <&clks IMX6QDL_CLK_ENET>,
+		 <&clks IMX6QDL_CLK_ENET>,
+		 <&rmii_clk>,
+		 <&clks IMX6QDL_CLK_ENET_REF>;
+	clock-names = "ipg", "ahb", "ptp", "enet_out";
 	status = "okay";
 
 	mdio {
diff --git a/arch/arm/boot/dts/imx6dl-plybas.dts b/arch/arm/boot/dts/imx6dl-plybas.dts
index bf72a67a9c76..c52e6caf3996 100644
--- a/arch/arm/boot/dts/imx6dl-plybas.dts
+++ b/arch/arm/boot/dts/imx6dl-plybas.dts
@@ -214,7 +214,7 @@
 &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	linux,rs485-enabled-at-boot-time;
 	rs485-rts-delay = <0 20>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6dl-plym2m.dts b/arch/arm/boot/dts/imx6dl-plym2m.dts
index 60fe5f14666e..522660c912a0 100644
--- a/arch/arm/boot/dts/imx6dl-plym2m.dts
+++ b/arch/arm/boot/dts/imx6dl-plym2m.dts
@@ -50,6 +50,11 @@
 		};
 	};
 
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&vdiv_vaccu>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -101,6 +106,64 @@
 		regulator-min-microvolt = <12000000>;
 		regulator-max-microvolt = <12000000>;
 	};
+
+	thermal-zones {
+		chassis-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&tsens0>;
+		};
+
+		touch-thermal0 {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&touch_temp0>;
+		};
+
+		touch-thermal1 {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&touch_temp1>;
+		};
+	};
+
+	touchscreen {
+		compatible = "resistive-adc-touch";
+		io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>,
+                              <&adc_ts 5>;
+		io-channel-names = "y", "z1", "z2", "x";
+		touchscreen-min-pressure = <64687>;
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+		touchscreen-x-plate-ohms = <300>;
+		touchscreen-y-plate-ohms = <800>;
+	};
+
+	touch_temp0: touch-temperature-sensor0 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc_ts 0>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-40000) 736
+						85000 474>;
+	};
+
+	touch_temp1: touch-temperature-sensor1 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc_ts 7>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-40000) 826
+						85000 609>;
+	};
+
+	vdiv_vaccu: voltage-divider-vaccu {
+		compatible = "voltage-divider";
+		io-channels = <&adc_ts 2>;
+		output-ohms = <2500>;
+		full-ohms = <64000>;
+		#io-channel-cells = <0>;
+	};
 };
 
 &can1 {
@@ -129,26 +192,61 @@
 	pinctrl-0 = <&pinctrl_ecspi2>;
 	status = "okay";
 
-	touchscreen@0 {
-		compatible = "ti,tsc2046";
+	adc_ts: adc@0 {
+		compatible = "ti,tsc2046e-adc";
 		reg = <0>;
 		pinctrl-0 = <&pinctrl_tsc2046>;
-		pinctrl-names ="default";
-		spi-max-frequency = <100000>;
-		interrupts-extended = <&gpio3 20 IRQ_TYPE_EDGE_FALLING>;
-		pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		spi-max-frequency = <1000000>;
+		interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>;
+		#io-channel-cells = <1>;
 
-		touchscreen-inverted-x;
-		touchscreen-inverted-y;
-		touchscreen-max-pressure = <4095>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@0 {
+			reg = <0>;
+			settling-time-us = <300>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@1 {
+			reg = <1>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
 
-		ti,vref-delay-usecs = /bits/ 16 <100>;
-		ti,x-plate-ohms = /bits/ 16 <800>;
-		ti,y-plate-ohms = /bits/ 16 <300>;
-		ti,debounce-max = /bits/ 16 <3>;
-		ti,debounce-tol = /bits/ 16 <70>;
-		ti,debounce-rep = /bits/ 16 <3>;
-		wakeup-source;
+		channel@2 {
+			reg = <2>;
+			settling-time-us = <300>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@3 {
+			reg = <3>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@4 {
+			reg = <4>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		/* channel 6 is not connected */
+
+		channel@7 {
+			reg = <7>;
+			settling-time-us = <300>;
+			oversampling-ratio = <5>;
+		};
 	};
 };
 
@@ -233,9 +331,10 @@
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
-	temperature-sensor@70 {
+	tsens0: temperature-sensor@70 {
 		compatible = "ti,tmp103";
 		reg = <0x70>;
+		#thermal-sensor-cells = <0>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx6dl-prtmvt.dts b/arch/arm/boot/dts/imx6dl-prtmvt.dts
index a35a1c66e770..1f8cddd83ccb 100644
--- a/arch/arm/boot/dts/imx6dl-prtmvt.dts
+++ b/arch/arm/boot/dts/imx6dl-prtmvt.dts
@@ -51,98 +51,98 @@
 		pinctrl-0 = <&pinctrl_gpiokeys>;
 		autorepeat;
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			wakeup-source;
 		};
 
-		f1 {
+		key-f1 {
 			label = "GPIO Key F1";
 			linux,code = <KEY_F1>;
 			gpios = <&gpio_pca 0 GPIO_ACTIVE_LOW>;
 		};
 
-		f2 {
+		key-f2 {
 			label = "GPIO Key F2";
 			linux,code = <KEY_F2>;
 			gpios = <&gpio_pca 1 GPIO_ACTIVE_LOW>;
 		};
 
-		f3 {
+		key-f3 {
 			label = "GPIO Key F3";
 			linux,code = <KEY_F3>;
 			gpios = <&gpio_pca 2 GPIO_ACTIVE_LOW>;
 		};
 
-		f4 {
+		key-f4 {
 			label = "GPIO Key F4";
 			linux,code = <KEY_F4>;
 			gpios = <&gpio_pca 3 GPIO_ACTIVE_LOW>;
 		};
 
-		f5 {
+		key-f5 {
 			label = "GPIO Key F5";
 			linux,code = <KEY_F5>;
 			gpios = <&gpio_pca 4 GPIO_ACTIVE_LOW>;
 		};
 
-		cycle {
+		key-cycle {
 			label = "GPIO Key CYCLE";
 			linux,code = <KEY_CYCLEWINDOWS>;
 			gpios = <&gpio_pca 5 GPIO_ACTIVE_LOW>;
 		};
 
-		esc {
+		key-esc {
 			label = "GPIO Key ESC";
 			linux,code = <KEY_ESC>;
 			gpios = <&gpio_pca 6 GPIO_ACTIVE_LOW>;
 		};
 
-		up {
+		key-up {
 			label = "GPIO Key UP";
 			linux,code = <KEY_UP>;
 			gpios = <&gpio_pca 7 GPIO_ACTIVE_LOW>;
 		};
 
-		down {
+		key-down {
 			label = "GPIO Key DOWN";
 			linux,code = <KEY_DOWN>;
 			gpios = <&gpio_pca 8 GPIO_ACTIVE_LOW>;
 		};
 
-		ok {
+		key-ok {
 			label = "GPIO Key OK";
 			linux,code = <KEY_OK>;
 			gpios = <&gpio_pca 9 GPIO_ACTIVE_LOW>;
 		};
 
-		f6 {
+		key-f6 {
 			label = "GPIO Key F6";
 			linux,code = <KEY_F6>;
 			gpios = <&gpio_pca 10 GPIO_ACTIVE_LOW>;
 		};
 
-		f7 {
+		key-f7 {
 			label = "GPIO Key F7";
 			linux,code = <KEY_F7>;
 			gpios = <&gpio_pca 11 GPIO_ACTIVE_LOW>;
 		};
 
-		f8 {
+		key-f8 {
 			label = "GPIO Key F8";
 			linux,code = <KEY_F8>;
 			gpios = <&gpio_pca 12 GPIO_ACTIVE_LOW>;
 		};
 
-		f9 {
+		key-f9 {
 			label = "GPIO Key F9";
 			linux,code = <KEY_F9>;
 			gpios = <&gpio_pca 13 GPIO_ACTIVE_LOW>;
 		};
 
-		f10 {
+		key-f10 {
 			label = "GPIO Key F10";
 			linux,code = <KEY_F10>;
 			gpios = <&gpio_pca 14 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/imx6dl-prtvt7.dts b/arch/arm/boot/dts/imx6dl-prtvt7.dts
index 190d26642bc8..a1eb53851794 100644
--- a/arch/arm/boot/dts/imx6dl-prtvt7.dts
+++ b/arch/arm/boot/dts/imx6dl-prtvt7.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 #include "imx6dl.dtsi"
 #include "imx6qdl-prti6q.dtsi"
+#include <dt-bindings/display/sdtv-standards.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/sound/fsl-imx-audmux.h>
@@ -28,95 +29,124 @@
 		power-supply = <&reg_bl_12v0>;
 	};
 
+	display {
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-0 = <&pinctrl_ipu1_disp>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&vdiv_vaccu>;
+	};
+
 	keys {
 		compatible = "gpio-keys";
 		autorepeat;
 
-		esc {
+		key-esc {
 			label = "GPIO Key ESC";
 			linux,code = <KEY_ESC>;
 			gpios = <&gpio_pca 0 GPIO_ACTIVE_LOW>;
 		};
 
-		up {
+		key-up {
 			label = "GPIO Key UP";
 			linux,code = <KEY_UP>;
 			gpios = <&gpio_pca 1 GPIO_ACTIVE_LOW>;
 		};
 
-		down {
+		key-down {
 			label = "GPIO Key DOWN";
 			linux,code = <KEY_DOWN>;
 			gpios = <&gpio_pca 4 GPIO_ACTIVE_LOW>;
 		};
 
-		enter {
+		key-enter {
 			label = "GPIO Key Enter";
 			linux,code = <KEY_ENTER>;
 			gpios = <&gpio_pca 3 GPIO_ACTIVE_LOW>;
 		};
 
-		cycle {
+		key-cycle {
 			label = "GPIO Key CYCLE";
 			linux,code = <KEY_CYCLEWINDOWS>;
 			gpios = <&gpio_pca 2 GPIO_ACTIVE_LOW>;
 		};
 
-		f1 {
+		key-f1 {
 			label = "GPIO Key F1";
 			linux,code = <KEY_F1>;
 			gpios = <&gpio_pca 14 GPIO_ACTIVE_LOW>;
 		};
 
-		f2 {
+		key-f2 {
 			label = "GPIO Key F2";
 			linux,code = <KEY_F2>;
 			gpios = <&gpio_pca 13 GPIO_ACTIVE_LOW>;
 		};
 
-		f3 {
+		key-f3 {
 			label = "GPIO Key F3";
 			linux,code = <KEY_F3>;
 			gpios = <&gpio_pca 12 GPIO_ACTIVE_LOW>;
 		};
 
-		f4 {
+		key-f4 {
 			label = "GPIO Key F4";
 			linux,code = <KEY_F4>;
 			gpios = <&gpio_pca 11 GPIO_ACTIVE_LOW>;
 		};
 
-		f5 {
+		key-f5 {
 			label = "GPIO Key F5";
 			linux,code = <KEY_F5>;
 			gpios = <&gpio_pca 10 GPIO_ACTIVE_LOW>;
 		};
 
-		f6 {
+		key-f6 {
 			label = "GPIO Key F6";
 			linux,code = <KEY_F6>;
 			gpios = <&gpio_pca 5 GPIO_ACTIVE_LOW>;
 		};
 
-		f7 {
+		key-f7 {
 			label = "GPIO Key F7";
 			linux,code = <KEY_F7>;
 			gpios = <&gpio_pca 6 GPIO_ACTIVE_LOW>;
 		};
 
-		f8 {
+		key-f8 {
 			label = "GPIO Key F8";
 			linux,code = <KEY_F8>;
 			gpios = <&gpio_pca 7 GPIO_ACTIVE_LOW>;
 		};
 
-		f9 {
+		key-f9 {
 			label = "GPIO Key F9";
 			linux,code = <KEY_F9>;
 			gpios = <&gpio_pca 8 GPIO_ACTIVE_LOW>;
 		};
 
-		f10 {
+		key-f10 {
 			label = "GPIO Key F10";
 			linux,code = <KEY_F10>;
 			gpios = <&gpio_pca 9 GPIO_ACTIVE_LOW>;
@@ -135,6 +165,30 @@
 		};
 	};
 
+	panel {
+		compatible = "innolux,g070y2-t02";
+		backlight = <&backlight_lcd>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	connector {
+		compatible = "composite-video-connector";
+		label = "Composite0";
+		sdtv-standards = <SDTV_STD_PAL_B>;
+
+		port {
+			comp0_out: endpoint {
+				remote-endpoint = <&tvp5150_comp0_in>;
+			};
+		};
+	};
+
 	reg_bl_12v0: regulator-bl-12v0 {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -146,6 +200,13 @@
 		enable-active-high;
 	};
 
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	reg_1v8: regulator-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "1v8";
@@ -179,6 +240,64 @@
 			frame-master;
 		};
 	};
+
+	thermal-zones {
+		chassis-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&tsens0>;
+		};
+
+		touch-thermal0 {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&touch_temp0>;
+		};
+
+		touch-thermal1 {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&touch_temp1>;
+		};
+	};
+
+	touchscreen {
+		compatible = "resistive-adc-touch";
+		io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>,
+                              <&adc_ts 5>;
+		io-channel-names = "y", "z1", "z2", "x";
+		touchscreen-min-pressure = <64687>;
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+		touchscreen-x-plate-ohms = <300>;
+		touchscreen-y-plate-ohms = <800>;
+	};
+
+	touch_temp0: touch-temperature-sensor0 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc_ts 0>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-40000) 736
+						85000 474>;
+	};
+
+	touch_temp1: touch-temperature-sensor1 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc_ts 7>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-40000) 826
+						85000 609>;
+	};
+
+	vdiv_vaccu: voltage-divider-vaccu {
+		compatible = "voltage-divider";
+		io-channels = <&adc_ts 2>;
+		output-ohms = <2500>;
+		full-ohms = <64000>;
+		#io-channel-cells = <0>;
+	};
 };
 
 &audmux {
@@ -221,22 +340,41 @@
 	pinctrl-0 = <&pinctrl_ecspi2>;
 	status = "okay";
 
-	touchscreen@0 {
-		compatible = "ti,tsc2046";
+	adc_ts: adc@0 {
+		compatible = "ti,tsc2046e-adc";
 		reg = <0>;
 		pinctrl-0 = <&pinctrl_tsc>;
-		pinctrl-names ="default";
-		spi-max-frequency = <100000>;
-		interrupts-extended = <&gpio3 20 IRQ_TYPE_EDGE_FALLING>;
-		pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
-		touchscreen-max-pressure = <4095>;
-		ti,vref-delay-usecs = /bits/ 16 <100>;
-		ti,x-plate-ohms = /bits/ 16 <800>;
-		ti,y-plate-ohms = /bits/ 16 <300>;
-		ti,debounce-max = /bits/ 16 <3>;
-		ti,debounce-tol = /bits/ 16 <70>;
-		ti,debounce-rep = /bits/ 16 <3>;
-		wakeup-source;
+		pinctrl-names = "default";
+		spi-max-frequency = <1000000>;
+		interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>;
+		#io-channel-cells = <1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@1 {
+			reg = <1>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@3 {
+			reg = <3>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@4 {
+			reg = <4>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
 	};
 };
 
@@ -252,6 +390,31 @@
 		VDDIO-supply = <&reg_3v3>;
 		VDDD-supply = <&reg_1v8>;
 	};
+
+	video@5c {
+		compatible = "ti,tvp5150";
+		reg = <0x5c>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			tvp5150_comp0_in: endpoint {
+				remote-endpoint = <&comp0_out>;
+			};
+		};
+
+		/* Output port 2 is video output pad */
+		port@2 {
+			reg = <2>;
+
+			tvp5151_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+			};
+		};
+	};
 };
 
 &i2c3 {
@@ -260,6 +423,12 @@
 		reg = <0x51>;
 	};
 
+	tsens0: temperature-sensor@70 {
+		compatible = "ti,tmp103";
+		reg = <0x70>;
+		#thermal-sensor-cells = <0>;
+	};
+
 	gpio_pca: gpio@74 {
 		compatible = "nxp,pca9539";
 		reg = <0x74>;
@@ -275,6 +444,14 @@
 	status = "okay";
 };
 
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display_in>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&tvp5151_to_ipu1_csi0_mux>;
+};
+
 &pwm1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
diff --git a/arch/arm/boot/dts/imx6dl-rex-basic.dts b/arch/arm/boot/dts/imx6dl-rex-basic.dts
index 0f1616bfa9a8..b72f8ea1e6f6 100644
--- a/arch/arm/boot/dts/imx6dl-rex-basic.dts
+++ b/arch/arm/boot/dts/imx6dl-rex-basic.dts
@@ -19,7 +19,7 @@
 };
 
 &ecspi3 {
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "sst,sst25vf016b", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index e7d9bfbfd0e4..e7be05f205d3 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -90,6 +90,7 @@
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii-id";
 	phy-handle = <&rgmii_phy>;
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
diff --git a/arch/arm/boot/dts/imx6dl-victgo.dts b/arch/arm/boot/dts/imx6dl-victgo.dts
index d37ba4ed847d..72df1dba83be 100644
--- a/arch/arm/boot/dts/imx6dl-victgo.dts
+++ b/arch/arm/boot/dts/imx6dl-victgo.dts
@@ -5,60 +5,27 @@
  */
 
 /dts-v1/;
-#include <dt-bindings/display/sdtv-standards.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/media/tvp5150.h>
-#include <dt-bindings/sound/fsl-imx-audmux.h>
 #include "imx6dl.dtsi"
+#include "imx6qdl-vicut1.dtsi"
 
 / {
 	model = "Kverneland TGO";
 	compatible = "kvg,victgo", "fsl,imx6dl";
 
-	chosen {
-		stdout-path = &uart4;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_backlight>;
-		pwms = <&pwm1 0 5000000 0>;
-		brightness-levels = <0 16 64 255>;
-		num-interpolated-steps = <16>;
-		default-brightness-level = <1>;
-		power-supply = <&reg_3v3>;
-		enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
-	};
-
-	connector {
-		compatible = "composite-video-connector";
-		label = "Composite0";
-		sdtv-standards = <SDTV_STD_PAL_B>;
-
-		port {
-			comp0_out: endpoint {
-				remote-endpoint = <&tvp5150_comp0_in>;
-			};
-		};
-	};
-
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpiokeys>;
 		autorepeat;
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			wakeup-source;
 		};
 
-		enter {
+		key-enter {
 			label = "Rotary Key";
 			gpios = <&gpio2 05 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_ENTER>;
@@ -66,36 +33,14 @@
 		};
 	};
 
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_leds>;
-
-		led-0 {
-			label = "debug0";
-			function = LED_FUNCTION_HEARTBEAT;
-			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		led-1 {
-			label = "debug1";
-			function = LED_FUNCTION_DISK;
-			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "disk-activity";
-		};
-
-		led-2 {
-			label = "power_led";
-			function = LED_FUNCTION_POWER;
-			gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&vdiv_vaccu>, <&vdiv_hitch_pos>;
 	};
 
 	panel {
-		compatible = "kyo,tcg121xglp";
-		backlight = <&backlight>;
+		compatible = "lg,lb070wv8";
+		backlight = <&backlight_lcd>;
 		power-supply = <&reg_3v3>;
 
 		port {
@@ -111,38 +56,6 @@
 		clock-frequency = <50000000>;
 	};
 
-	reg_1v8: regulator-1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "1v8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_h1_vbus: regulator-h1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "h1-vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_otg_vbus: regulator-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "otg-vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
 	rotary-encoder {
 		compatible = "rotary-encoder";
 		pinctrl-0 = <&pinctrl_rotary_ch>;
@@ -155,86 +68,69 @@
 		wakeup-source;
 	};
 
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "prti6q-sgtl5000";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,widgets =
-			"Microphone", "Microphone Jack",
-			"Line", "Line In Jack",
-			"Headphone", "Headphone Jack",
-			"Speaker", "External Speaker";
-		simple-audio-card,routing =
-			"MIC_IN", "Microphone Jack",
-			"LINE_IN", "Line In Jack",
-			"Headphone Jack", "HP_OUT",
-			"External Speaker", "LINE_OUT";
-
-		simple-audio-card,cpu {
-			sound-dai = <&ssi1>;
-			system-clock-frequency = <0>;
+	thermal-zones {
+		chassis-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&tsens0>;
 		};
 
-		simple-audio-card,codec {
-			sound-dai = <&codec>;
-			bitclock-master;
-			frame-master;
+		touch-thermal0 {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&touch_temp0>;
 		};
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
 
-	mux-ssi1 {
-		fsl,audmux-port = <0>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN		0
-			IMX_AUDMUX_V2_PTCR_TFSEL(2)	0
-			IMX_AUDMUX_V2_PTCR_TCSEL(2)	0
-			IMX_AUDMUX_V2_PTCR_TFSDIR	0
-			IMX_AUDMUX_V2_PTCR_TCLKDIR	IMX_AUDMUX_V2_PDCR_RXDSEL(2)
-		>;
+		touch-thermal1 {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&touch_temp1>;
+		};
 	};
 
-	mux-pins3 {
-		fsl,audmux-port = <2>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN		IMX_AUDMUX_V2_PDCR_RXDSEL(0)
-			0				IMX_AUDMUX_V2_PDCR_TXRXEN
-		>;
+	touchscreen {
+		compatible = "resistive-adc-touch";
+		io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>,
+                              <&adc_ts 5>;
+		io-channel-names = "y", "z1", "z2", "x";
+		touchscreen-min-pressure = <64687>;
+		touchscreen-inverted-y;
+		touchscreen-x-plate-ohms = <300>;
+		touchscreen-y-plate-ohms = <800>;
 	};
-};
 
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can2>;
-	status = "okay";
-};
+	touch_temp0: touch-temperature-sensor0 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc_ts 0>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-40000) 736
+						85000 474>;
+	};
 
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
-};
+	touch_temp1: touch-temperature-sensor1 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc_ts 7>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-40000) 826
+						85000 609>;
+	};
 
-&ecspi1 {
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
+	vdiv_vaccu: voltage-divider-vaccu {
+		compatible = "voltage-divider";
+		io-channels = <&adc_ts 2>;
+		output-ohms = <2500>;
+		full-ohms = <64000>;
+		#io-channel-cells = <0>;
+	};
 
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <20000000>;
+	vdiv_hitch_pos: voltage-divider-hitch-pos {
+		compatible = "voltage-divider";
+		io-channels = <&adc_ts 6>;
+		output-ohms = <3300>;
+		full-ohms = <13300>;
+		#io-channel-cells = <0>;
 	};
 };
 
@@ -244,22 +140,41 @@
 	pinctrl-0 = <&pinctrl_ecspi2>;
 	status = "okay";
 
-	touchscreen@0 {
-		compatible = "ti,tsc2046";
+	adc_ts: adc@0 {
+		compatible = "ti,tsc2046e-adc";
 		reg = <0>;
-		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_touchscreen>;
-		spi-max-frequency = <200000>;
-		interrupts-extended = <&gpio5 8 IRQ_TYPE_EDGE_FALLING>;
-		pendown-gpio = <&gpio5 8 GPIO_ACTIVE_LOW>;
-		touchscreen-size-x = <800>;
-		touchscreen-size-y = <480>;
-		touchscreen-inverted-y;
-		touchscreen-max-pressure = <4095>;
-		ti,vref-delay-usecs = /bits/ 16 <100>;
-		ti,x-plate-ohms = /bits/ 16 <800>;
-		ti,y-plate-ohms = /bits/ 16 <300>;
-		wakeup-source;
+		pinctrl-names = "default";
+		spi-max-frequency = <1000000>;
+		interrupts-extended = <&gpio5 8 IRQ_TYPE_LEVEL_LOW>;
+		#io-channel-cells = <1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@1 {
+			reg = <1>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@3 {
+			reg = <3>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@4 {
+			reg = <4>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
 	};
 };
 
@@ -295,36 +210,19 @@
 			"CAM2_MIRROR", "", "", "SMBALERT",
 		"DEBUG_0", "DEBUG_1", "", "", "", "", "", "",
 		"SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK",
-			"SD1_DATA3", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&gpio2 {
-	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"REV_ID0", "REV_ID1", "REV_ID2", "REV_ID3", "REV_ID4",
-			"BOARD_ID0", "BOARD_ID1", "BOARD_ID2",
-		"", "", "", "", "", "", "ISB_IN1", "ON_SWITCH",
-		"POWER_LED", "", "", "", "", "", "", "";
-};
-
-&gpio3 {
-	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"ECSPI1_SCLK", "ECSPI1_MISO", "ECSPI1_MOSI", "ECSPI1_SS1",
-			"CPU_ON1_FB", "USB_EXT1_OC", "USB_EXT1_PWR", "YACO_IRQ",
-		"TSS_TXD", "TSS_RXD", "", "", "", "", "YACO_BOOT0",
-			"YACO_RESET";
+			"SD1_DATA3", "ETH_MDIO", "",
+		"", "", "", "", "", "", "", "ETH_MDC";
 };
 
 &gpio4 {
 	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "CAN1_SR", "CAN2_SR", "CAN2_TX", "CAN2_RX",
-		"", "", "DIP1_FB", "", "VCAM_EN", "", "", "",
-		"CPU_LIGHT_ON", "", "ETH_RESET", "CPU_CONTACT_IN", "BL_EN",
-			"BL_PWM", "ETH_INTRP", "ISB_LED";
+		"", "", "", "", "", "", "UART4_TXD", "UART4_RXD",
+		"UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR",
+			"CAN2_SR", "CAN2_TX", "CAN2_RX",
+		"", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL",
+			"HITCH_IN_OUT",
+		"LIGHT_ON", "", "ETH_RESET", "CONTACT_IN", "BL_EN",
+			"BL_PWM", "ETH_INT", "ISB_LED";
 };
 
 &gpio5 {
@@ -332,51 +230,22 @@
 		"", "", "", "", "", "", "", "",
 		"TSC_PENIRQ", "TSC_BUSY", "ECSPI2_MOSI", "ECSPI2_MISO",
 			"ECSPI2_SS0", "ECSPI2_SCLK", "", "",
-		"", "", "", "", "", "", "", "",
+		"", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET",
+			"I2S_BITCLK", "I2S_DOUT",
 		"I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX",
 			"YACO_AUX_TX", "ITU656_D0", "ITU656_D1";
 };
 
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: audio-codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0xa>;
-		#sound-dai-cells = <0>;
-		clocks = <&clks 201>;
-		VDDA-supply = <&reg_3v3>;
-		VDDIO-supply = <&reg_3v3>;
-		VDDD-supply = <&reg_1v8>;
-	};
-
-	video-decoder@5c {
-		compatible = "ti,tvp5150";
-		reg = <0x5c>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-
-			tvp5150_comp0_in: endpoint {
-				remote-endpoint = <&comp0_out>;
-			};
-		};
-
-		/* Output port 2 is video output pad */
-		port@2 {
-			reg = <2>;
-
-			tvp5151_to_ipu1_csi0_mux: endpoint {
-				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
-			};
-		};
-	};
+&gpio6 {
+	gpio-line-names =
+		"ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5",
+			"ITU656_D6", "ITU656_D7", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
 
+&i2c1 {
 	keypad@70 {
 		compatible = "holtek,ht16k33";
 		pinctrl-names = "default";
@@ -400,224 +269,9 @@
 			MATRIX_KEY(6, 1, KEY_F1)
 		      >;
 	};
-
-	/* additional i2c devices are added automatically by the boot loader */
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	adc@49 {
-		compatible = "ti,ads1015";
-		reg = <0x49>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		channel@4 {
-			reg = <4>;
-			ti,gain = <3>;
-			ti,datarate = <3>;
-		};
-
-		channel@5 {
-			reg = <5>;
-			ti,gain = <3>;
-			ti,datarate = <3>;
-		};
-
-		channel@6 {
-			reg = <6>;
-			ti,gain = <3>;
-			ti,datarate = <3>;
-		};
-
-		channel@7 {
-			reg = <7>;
-			ti,gain = <3>;
-			ti,datarate = <3>;
-		};
-	};
-
-	rtc@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-
-	temperature-sensor@70 {
-		compatible = "ti,tmp103";
-		reg = <0x70>;
-	};
-};
-
-&ipu1_csi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ipu1_csi0>;
-	status = "okay";
-};
-
-&ipu1_csi0_mux_from_parallel_sensor {
-	remote-endpoint = <&tvp5151_to_ipu1_csi0_mux>;
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&ssi1 {
-	#sound-dai-cells = <0>;
-	fsl,mode = "ac97-slave";
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_h1_vbus>;
-	pinctrl-names = "default";
-	phy_type = "utmi";
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	phy_type = "utmi";
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-	no-1-8-v;
-	disable-wp;
-	cap-sd-highspeed;
-	no-mmc;
-	no-sdio;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <8>;
-	no-1-8-v;
-	non-removable;
-	no-sd;
-	no-sdio;
-	status = "okay";
 };
 
 &iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			/* SGTL5000 sys_mclk */
-			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1			0x030b0
-			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD			0x130b0
-			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC			0x130b0
-			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD			0x110b0
-			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS			0x130b0
-		>;
-	};
-
-	pinctrl_backlight: backlightgrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28		0x1b0b0
-		>;
-	};
-
-	pinctrl_can1: can1grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX		0x1b000
-			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX		0x3008
-			/* CAN1_SR */
-			MX6QDL_PAD_KEY_COL3__GPIO4_IO12			0x13008
-			/* CAN1_TERM */
-			MX6QDL_PAD_GPIO_0__GPIO1_IO00			0x1b088
-		>;
-	};
-
-	pinctrl_can2: can2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX		0x1b000
-			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX		0x3008
-			/* CAN2_SR */
-			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13			0x13008
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D17__ECSPI1_MISO			0x100b1
-			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI			0x100b1
-			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK			0x100b1
-			/* CS */
-			MX6QDL_PAD_EIM_D19__GPIO3_IO19			0x000b1
-		>;
-	};
-
 	pinctrl_ecspi2: ecspi2grp {
 		fsl,pins = <
 			MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI		0x100b1
@@ -656,113 +310,12 @@
 		>;
 	};
 
-	pinctrl_hog: hoggrp {
-		fsl,pins = <
-			/* ITU656_nRESET */
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02			0x1b0b0
-			/* CAM1_MIRROR */
-			MX6QDL_PAD_GPIO_3__GPIO1_IO03			0x130b0
-			/* CAM2_MIRROR */
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04			0x130b0
-			/* CAM_nDETECT */
-			MX6QDL_PAD_GPIO_17__GPIO7_IO12			0x1b0b0
-			/* ISB_IN1 */
-			MX6QDL_PAD_EIM_A16__GPIO2_IO22			0x130b0
-			/* ISB_nIN2 */
-			MX6QDL_PAD_EIM_A17__GPIO2_IO21			0x1b0b0
-			/* WARN_LIGHT */
-			MX6QDL_PAD_EIM_A19__GPIO2_IO19			0x100b0
-			/* ON2_FB */
-			MX6QDL_PAD_EIM_A25__GPIO5_IO02			0x100b0
-			/* YACO_nIRQ */
-			MX6QDL_PAD_EIM_D23__GPIO3_IO23			0x1b0b0
-			/* YACO_BOOT0 */
-			MX6QDL_PAD_EIM_D30__GPIO3_IO30			0x130b0
-			/* YACO_nRESET */
-			MX6QDL_PAD_EIM_D31__GPIO3_IO31			0x1b0b0
-			/* FORCE_ON1 */
-			MX6QDL_PAD_EIM_EB2__GPIO2_IO30			0x1b0b0
-			/* AUDIO_nRESET */
-			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21		0x1f0b0
-			/* ITU656_nPDN */
-			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20		0x1b0b0
-
-			/* HW revision detect */
-			/* REV_ID0 */
-			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08			0x1b0b0
-			/* REV_ID1 is shared with PWM3 */
-			/* REV_ID2 */
-			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10			0x1b0b0
-			/* REV_ID3 */
-			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11			0x1b0b0
-			/* REV_ID4 */
-			MX6QDL_PAD_SD4_DAT4__GPIO2_IO12			0x1b0b0
-
-			/* New in HW revision 1 */
-			/* ON1_FB */
-			MX6QDL_PAD_EIM_D20__GPIO3_IO20			0x100b0
-			/* DIP1_FB */
-			MX6QDL_PAD_DI0_PIN2__GPIO4_IO18			0x1b0b0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001f8b1
-			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001f8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_ipu1_csi0: ipu1csi0grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19		0x1b0b0
-			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK	0x1b0b0
-		>;
-	};
-
 	pinctrl_keypad: keypadgrp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_19__GPIO4_IO05			0x1b0b0
 		>;
 	};
 
-	pinctrl_leds: ledsgrp {
-		fsl,pins = <
-			/* DEBUG0 */
-			MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16		0x1b0b0
-			/* DEBUG1 */
-			MX6QDL_PAD_DI0_PIN15__GPIO4_IO17		0x1b0b0
-			/* POWER_LED */
-			MX6QDL_PAD_EIM_CS1__GPIO2_IO24			0x1b0b0
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT			0x1b0b0
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT1__PWM3_OUT			0x1b0b0
-		>;
-	};
-
 	pinctrl_rotary_ch: rotarychgrp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_D3__GPIO2_IO03			0x1b0b0
@@ -776,77 +329,4 @@
 			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09		0x1b0b0
 		>;
 	};
-
-	/* YaCO AUX Uart */
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA		0x1b0b1
-			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D26__UART2_TX_DATA		0x1b0b1
-			MX6QDL_PAD_EIM_D27__UART2_RX_DATA		0x1b0b1
-		>;
-	};
-
-	/* YaCO Touchscreen UART */
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D24__UART3_TX_DATA		0x1b0b1
-			MX6QDL_PAD_EIM_D25__UART3_RX_DATA		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA		0x1b0b1
-			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA		0x1b0b1
-			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA		0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__USB_OTG_OC			0x1b0b0
-			/* power enable, high active */
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22			0x1b0b0
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD			0x170f9
-			MX6QDL_PAD_SD1_CLK__SD1_CLK			0x100f9
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0			0x170f9
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1			0x170f9
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2			0x170f9
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3			0x170f9
-			MX6QDL_PAD_GPIO_1__GPIO1_IO01			0x1b0b0
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD			0x17099
-			MX6QDL_PAD_SD3_CLK__SD3_CLK			0x10099
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0			0x17099
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1			0x17099
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2			0x17099
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3			0x17099
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4			0x17099
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5			0x17099
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6			0x17099
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7			0x17099
-			MX6QDL_PAD_SD3_RST__SD3_RESET			0x1b0b1
-		>;
-	};
 };
diff --git a/arch/arm/boot/dts/imx6dl-vicut1.dts b/arch/arm/boot/dts/imx6dl-vicut1.dts
index 174fd913bf96..5035d303447d 100644
--- a/arch/arm/boot/dts/imx6dl-vicut1.dts
+++ b/arch/arm/boot/dts/imx6dl-vicut1.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 #include "imx6dl.dtsi"
 #include "imx6qdl-vicut1.dtsi"
+#include "imx6qdl-vicut1-12inch.dtsi"
 
 / {
 	model = "Kverneland UT1 Board";
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
index 674af39c884a..52162e8c7274 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -55,6 +55,7 @@
 	panel: panel {
 		compatible = "dataimage,scf0700c48ggu18";
 		power-supply = <&sw2_reg>;
+		backlight = <&backlight>;
 		status = "disabled";
 
 		port {
diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
index fdd81fdc3f35..dc919e09a505 100644
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -80,10 +80,13 @@
 		};
 	};
 
-	soc {
+	soc: soc {
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
diff --git a/arch/arm/boot/dts/imx6q-apalis-eval.dts b/arch/arm/boot/dts/imx6q-apalis-eval.dts
index a0683b4aeca1..fa160a389870 100644
--- a/arch/arm/boot/dts/imx6q-apalis-eval.dts
+++ b/arch/arm/boot/dts/imx6q-apalis-eval.dts
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2014-2020 Toradex
+ * Copyright 2014-2022 Toradex
  * Copyright 2012 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
  */
@@ -30,89 +30,26 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		wakeup {
-			label = "Wake-Up";
-			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WAKEUP>;
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-	};
-
-	lcd_display: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-
-			lcd_display_in: endpoint {
-				remote-endpoint = <&ipu1_di1_disp1>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
-
-	panel: panel {
-		/*
-		 * edt,et057090dhu: EDT 5.7" LCD TFT
-		 * edt,et070080dh6: EDT 7.0" LCD TFT
-		 */
-		compatible = "edt,et057090dhu";
-		backlight = <&backlight>;
-		power-supply = <&reg_3v3_sw>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-
 	reg_pcie_switch: regulator-pcie-switch {
 		compatible = "regulator-fixed";
-		regulator-name = "pcie_switch";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
+		enable-active-high;
 		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "pcie_switch";
 		startup-delay-us = <100000>;
-		enable-active-high;
 		status = "okay";
 	};
 
 	reg_3v3_sw: regulator-3v3-sw {
 		compatible = "regulator-fixed";
-		regulator-name = "3.3V_SW";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
 		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3.3V_SW";
 	};
 };
 
-&backlight {
-	brightness-levels = <0 127 191 223 239 247 251 255>;
-	default-brightness-level = <1>;
-	power-supply = <&reg_3v3_sw>;
-	status = "okay";
-};
-
 &can1 {
 	xceiver-supply = <&reg_3v3_sw>;
 	status = "okay";
@@ -123,27 +60,10 @@
 	status = "okay";
 };
 
-&hdmi {
-	status = "okay";
-};
-
 /* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
 &i2c1 {
 	status = "okay";
 
-	/*
-	 * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>,
-	 * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms
-	 */
-	touchscreen@4a {
-		compatible = "atmel,maxtouch";
-		reg = <0x4a>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; /* SODIMM 13 */
-		status = "disabled";
-	};
-
 	pcie-switch@58 {
 		compatible = "plx,pex8605";
 		reg = <0x58>;
@@ -164,14 +84,6 @@
 	status = "okay";
 };
 
-&ipu1_di1_disp1 {
-	remote-endpoint = <&lcd_display_in>;
-};
-
-&ldb {
-	status = "okay";
-};
-
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_reset_moci>;
@@ -198,11 +110,11 @@
 	status = "okay";
 };
 
-&reg_usb_otg_vbus {
+&reg_usb_host_vbus {
 	status = "okay";
 };
 
-&reg_usb_host_vbus {
+&reg_usb_otg_vbus {
 	status = "okay";
 };
 
@@ -246,28 +158,13 @@
 
 /* MMC1 */
 &usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit &pinctrl_mmc_cd>;
-	cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
 /* SD1 */
 &usdhc2 {
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>;
-	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
-
-&iomuxc {
-	/*
-	 * Mux the Apalis GPIOs
-	 */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2
-		     &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4
-		     &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6
-		     &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8
-		    >;
-};
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
index 86e84781cf5d..44637d606e61 100644
--- a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
+++ b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
@@ -1,274 +1,37 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2014-2020 Toradex
+ * Copyright 2014-2022 Toradex
  * Copyright 2012 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
  */
 
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "imx6q.dtsi"
-#include "imx6qdl-apalis.dtsi"
+#include "imx6q-apalis-ixora-v1.2.dts"
 
 / {
 	model = "Toradex Apalis iMX6Q/D Module on Ixora Carrier Board V1.1";
-	compatible = "toradex,apalis_imx6q-ixora-v1.1",
-		     "toradex,apalis_imx6q-ixora", "toradex,apalis_imx6q",
+	compatible = "toradex,apalis_imx6q-ixora-v1.1", "toradex,apalis_imx6q",
 		     "fsl,imx6q";
 
-	aliases {
-		i2c0 = &i2c1;
-		i2c1 = &i2c3;
-		i2c2 = &i2c2;
-		rtc0 = &rtc_i2c;
-		rtc1 = &snvs_rtc;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		wakeup {
-			label = "Wake-Up";
-			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WAKEUP>;
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-	};
-
-	lcd_display: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-
-			lcd_display_in: endpoint {
-				remote-endpoint = <&ipu1_di1_disp1>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
 
-	panel: panel {
-		/*
-		 * edt,et057090dhu: EDT 5.7" LCD TFT
-		 * edt,et070080dh6: EDT 7.0" LCD TFT
-		 */
-		compatible = "edt,et057090dhu";
-		backlight = <&backlight>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_leds_ixora>;
-
-		led4-green {
-			label = "LED_4_GREEN";
-			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
-		};
-
-		led4-red {
-			label = "LED_4_RED";
-			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-		};
-
-		led5-green {
-			label = "LED_5_GREEN";
-			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
-		};
-
-		led5-red {
-			label = "LED_5_RED";
-			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
-		};
-	};
 };
 
-&backlight {
-	brightness-levels = <0 127 191 223 239 247 251 255>;
-	default-brightness-level = <1>;
-	status = "okay";
-};
+/delete-node/ &eeprom;
+/delete-node/ &reg_3v3_vmmc;
+/delete-node/ &reg_can1_supply;
+/delete-node/ &reg_can2_supply;
 
 &can1 {
-	status = "okay";
+	/delete-property/ xceiver-supply;
 };
 
 &can2 {
-	status = "okay";
-};
-
-&hdmi {
-	status = "okay";
-};
-
-/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
-&i2c1 {
-	status = "okay";
-
-	/*
-	 * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>,
-	 * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms
-	 */
-	touchscreen@4a {
-		compatible = "atmel,maxtouch";
-		reg = <0x4a>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; /* SODIMM 13 */
-		status = "disabled";
-	};
-
-	/* M41T0M6 real time clock on carrier board */
-	rtc_i2c: rtc@68 {
-		compatible = "st,m41t0";
-		reg = <0x68>;
-	};
-};
-
-/*
- * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
- * board)
- */
-&i2c3 {
-	status = "okay";
-};
-
-&ipu1_di1_disp1 {
-	remote-endpoint = <&lcd_display_in>;
-};
-
-&ldb {
-	status = "okay";
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_reset_moci>;
-	/* active-high meaning opposite of regular PERST# active-low polarity */
-	reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-	reset-gpio-active-high;
-	status = "okay";
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&pwm2 {
-	status = "okay";
-};
-
-&pwm3 {
-	status = "okay";
-};
-
-&pwm4 {
-	status = "okay";
-};
-
-&reg_usb_otg_vbus {
-	status = "okay";
-};
-
-&reg_usb_host_vbus {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&sound_spdif {
-	status = "okay";
-};
-
-&spdif {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart4 {
-	status = "okay";
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_host_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	status = "okay";
+	/delete-property/ xceiver-supply;
 };
 
 /* MMC1 */
 &usdhc1 {
+	/delete-property/ cap-power-off-card;
+	/delete-property/ pinctrl-1;
+	/delete-property/ vmmc-supply;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_mmc_cd>;
-	cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&iomuxc {
-	/*
-	 * Mux the Apalis GPIOs
-	 */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2
-		     &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4
-		     &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6
-		     &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8
-		    >;
-
-	pinctrl_leds_ixora: ledsixoragrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x1b0b0
-			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0
-			MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
-			MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
-		>;
-	};
 };
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.2.dts b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.2.dts
new file mode 100644
index 000000000000..f9f7d99bd4db
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.2.dts
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2014-2022 Toradex
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6q.dtsi"
+#include "imx6qdl-apalis.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module on Ixora Carrier Board V1.2";
+	compatible = "toradex,apalis_imx6q-ixora-v1.2", "toradex,apalis_imx6q",
+		     "fsl,imx6q";
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c3;
+		i2c2 = &i2c2;
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds_ixora>;
+
+		led4-green {
+			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+			label = "LED_4_GREEN";
+		};
+
+		led4-red {
+			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+			label = "LED_4_RED";
+		};
+
+		led5-green {
+			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+			label = "LED_5_GREEN";
+		};
+
+		led5-red {
+			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+			label = "LED_5_RED";
+		};
+	};
+
+	reg_3v3_vmmc: regulator-3v3-vmmc {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_3v3_vmmc>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3v3_vmmc";
+		startup-delay-us = <100>;
+	};
+
+	reg_can1_supply: regulator-can1-supply {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_can1_power>;
+		regulator-name = "can1_supply";
+	};
+
+	reg_can2_supply: regulator-can2-supply {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_can2_power>;
+		regulator-name = "can2_supply";
+	};
+};
+
+&can1 {
+	xceiver-supply = <&reg_can1_supply>;
+	status = "okay";
+};
+
+&can2 {
+	xceiver-supply = <&reg_can2_supply>;
+	status = "okay";
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart24_forceoff>;
+
+	/*
+	 * uart-2-4-on-x21-enable-hog enables the UART transceiver for Apalis
+	 * UART2 and UART3. If one wants to disable the transceiver force
+	 * the GPIO to output-low, if one wants to control the transceiver
+	 * from user space delete the hog node.
+	 */
+	uart-2-4-on-x21-enable-hog {
+		gpio-hog;
+		gpios = <11 GPIO_ACTIVE_HIGH>; /* MXM3 180 */
+		output-high;
+	};
+};
+
+/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
+&i2c1 {
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+/*
+ * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
+ * board)
+ */
+&i2c3 {
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_reset_moci>;
+	/* active-high meaning opposite of regular PERST# active-low polarity */
+	reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+	reset-gpio-active-high;
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&reg_usb_host_vbus {
+	status = "okay";
+};
+
+&reg_usb_otg_vbus {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&sound_spdif {
+	status = "okay";
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_host_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	status = "okay";
+};
+
+/* MMC1 */
+&usdhc1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_mmc_cd>;
+	pinctrl-1 = <&pinctrl_usdhc1_4bit_sleep &pinctrl_mmc_cd_sleep>;
+	bus-width = <4>;
+	cap-power-off-card;
+	vmmc-supply = <&reg_3v3_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enable_3v3_vmmc: enable3v3vmmcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
+		>;
+	};
+
+	pinctrl_enable_can1_power: enablecan1powergrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
+		>;
+	};
+
+	pinctrl_enable_can2_power: enablecan2powergrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart24_forceoff: uart24forceoffgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x1b0b0
+		>;
+	};
+
+	pinctrl_leds_ixora: ledsixoragrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x1b0b0
+			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
+		>;
+	};
+
+	pinctrl_mmc_cd_sleep: mmccdslpgrp {
+		fsl,pins = <
+			 /* MMC1 CD */
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x0
+		>;
+	};
+
+	pinctrl_usdhc1_4bit_sleep: usdhc1-4bitslpgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD     0x3000
+			MX6QDL_PAD_SD1_CLK__SD1_CLK     0x3000
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0  0x3000
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1  0x3000
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2  0x3000
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3  0x3000
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
index 62e72773e53b..ce39c6a3f640 100644
--- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts
+++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2014-2020 Toradex
+ * Copyright 2014-2022 Toradex
  * Copyright 2012 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
  */
@@ -30,95 +30,33 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		wakeup {
-			label = "Wake-Up";
-			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WAKEUP>;
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-	};
-
-	lcd_display: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-
-			lcd_display_in: endpoint {
-				remote-endpoint = <&ipu1_di1_disp1>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
-
-	panel: panel {
-		/*
-		 * edt,et057090dhu: EDT 5.7" LCD TFT
-		 * edt,et070080dh6: EDT 7.0" LCD TFT
-		 */
-		compatible = "edt,et057090dhu";
-		backlight = <&backlight>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-
 	leds {
 		compatible = "gpio-leds";
-
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_leds_ixora>;
 
 		led4-green {
-			label = "LED_4_GREEN";
 			gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+			label = "LED_4_GREEN";
 		};
 
 		led4-red {
-			label = "LED_4_RED";
 			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+			label = "LED_4_RED";
 		};
 
 		led5-green {
-			label = "LED_5_GREEN";
 			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+			label = "LED_5_GREEN";
 		};
 
 		led5-red {
-			label = "LED_5_RED";
 			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+			label = "LED_5_RED";
 		};
 	};
 };
 
-&backlight {
-	brightness-levels = <0 127 191 223 239 247 251 255>;
-	default-brightness-level = <1>;
-	status = "okay";
-};
-
 &can1 {
 	status = "okay";
 };
@@ -127,27 +65,10 @@
 	status = "okay";
 };
 
-&hdmi {
-	status = "okay";
-};
-
 /* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
 &i2c1 {
 	status = "okay";
 
-	/*
-	 * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>,
-	 * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms
-	 */
-	touchscreen@4a {
-		compatible = "atmel,maxtouch";
-		reg = <0x4a>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; /* SODIMM 13 */
-		status = "disabled";
-	};
-
 	eeprom@50 {
 		compatible = "atmel,24c02";
 		reg = <0x50>;
@@ -168,14 +89,6 @@
 	status = "okay";
 };
 
-&ipu1_di1_disp1 {
-	remote-endpoint = <&lcd_display_in>;
-};
-
-&ldb {
-	status = "okay";
-};
-
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_reset_moci>;
@@ -201,11 +114,11 @@
 	status = "okay";
 };
 
-&reg_usb_otg_vbus {
+&reg_usb_host_vbus {
 	status = "okay";
 };
 
-&reg_usb_host_vbus {
+&reg_usb_otg_vbus {
 	status = "okay";
 };
 
@@ -249,21 +162,13 @@
 
 /* SD1 */
 &usdhc2 {
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>;
-	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
 &iomuxc {
-	/* Mux the Apalis GPIOs */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2
-		     &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4
-		     &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6
-		     &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8
-		    >;
-
 	pinctrl_leds_ixora: ledsixoragrp {
 		fsl,pins = <
 			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0
diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
index 0b40f52268b3..75586299d9ca 100644
--- a/arch/arm/boot/dts/imx6q-arm2.dts
+++ b/arch/arm/boot/dts/imx6q-arm2.dts
@@ -178,6 +178,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi
index 6330d75f8f39..f266f1b7e0cf 100644
--- a/arch/arm/boot/dts/imx6q-ba16.dtsi
+++ b/arch/arm/boot/dts/imx6q-ba16.dtsi
@@ -142,7 +142,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: n25q032@0 {
+	flash: flash@0 {
 		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/imx6q-bosch-acc.dts b/arch/arm/boot/dts/imx6q-bosch-acc.dts
new file mode 100644
index 000000000000..8263bfef9bf8
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-bosch-acc.dts
@@ -0,0 +1,779 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Support for the i.MX6-based Bosch ACC board.
+ *
+ * Copyright (C) 2016 Garz & Fricke GmbH
+ * Copyright (C) 2018 DENX Software Engineering GmbH, Heiko Schocher <hs@denx.de>
+ * Copyright (C) 2018 DENX Software Engineering GmbH, Niel Fourie <lusus@denx.de>
+ * Copyright (C) 2019-2021 Bosch Thermotechnik GmbH, Matthias Winker <matthias.winker@bosch.com>
+ * Copyright (C) 2022 DENX Software Engineering GmbH, Philip Oberfichtner <pro@denx.de>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "imx6q.dtsi"
+
+/ {
+	model = "Bosch ACC";
+	compatible = "bosch,imx6q-acc", "fsl,imx6q";
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		mmc0 = &usdhc4;
+		mmc1 = &usdhc2;
+		serial0 = &uart2;
+		serial1 = &uart1;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 200000>;
+		brightness-levels = <0 61 499 1706 4079 8022 13938 22237 33328 47623 65535>;
+		num-interpolated-steps = <10>;
+		default-brightness-level = <60>;
+		power-supply = <&reg_lcd>;
+	};
+
+	panel {
+		compatible = "dataimage,fg1001l0dsswmg01";
+		backlight = <&backlight_lvds>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	refclk: refclk {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clocks = <&clks IMX6QDL_CLK_CKO2>;
+		clock-div = <1>;
+		clock-mult = <1>;
+		clock-output-names = "12mhz_refclk";
+		assigned-clocks = <&clks IMX6QDL_CLK_CKO>,
+				  <&clks IMX6QDL_CLK_CKO2>,
+				  <&clks IMX6QDL_CLK_CKO2_SEL>;
+		assigned-clock-parents = <&clks IMX6QDL_CLK_CKO2>,
+					 <&clks IMX6QDL_CLK_CKO2_PODF>,
+					 <&clks IMX6QDL_CLK_OSC>;
+		assigned-clock-rates = <0>, <12000000>, <0>;
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			operating-points = <
+				/* kHz    uV */
+				1200000 1275000
+				996000  1225000
+				852000  1225000
+				792000  1150000
+				396000  950000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				1200000 1225000
+				996000	1175000
+				852000	1175000
+				792000	1150000
+				396000	1150000
+			>;
+		};
+
+		cpu1: cpu@1 {
+			operating-points = <
+				/* kHz    uV */
+				1200000 1275000
+				996000  1225000
+				852000  1225000
+				792000  1150000
+				396000  950000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				1200000 1225000
+				996000	1175000
+				852000	1175000
+				792000	1150000
+				396000	1150000
+			>;
+		};
+	};
+
+	pwm-leds {
+		compatible = "pwm-leds";
+
+		led_red: led-0 {
+			color = <LED_COLOR_ID_RED>;
+			max-brightness = <248>;
+			default-state = "off";
+			pwms = <&pwm2 0 500000>;
+		};
+
+		led_white: led-1 {
+			color = <LED_COLOR_ID_WHITE>;
+			max-brightness = <248>;
+			default-state = "off";
+			pwms = <&pwm3 0 500000>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reset_gpio_led>;
+
+		led-2 {
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	reg_5p0: regulator-5p0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5p0";
+	};
+
+	reg_vin: regulator-vin {
+		compatible = "regulator-fixed";
+		regulator-name = "VIN";
+		regulator-min-microvolt = <4500000>;
+		regulator-max-microvolt = <4500000>;
+		regulator-always-on;
+		vin-supply = <&reg_5p0>;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&reg_5p0>;
+	};
+
+	reg_usb_h2_vbus: regulator-usb-h2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_5p0> ;
+		regulator-always-on;
+	};
+
+	reg_vsnvs: regulator-vsnvs {
+		compatible = "regulator-fixed";
+		regulator-name = "VSNVS_3V0";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-always-on;
+		vin-supply = <&reg_5p0>;
+	};
+
+	reg_lcd: regulator-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD0 POWER";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_enable>;
+		gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	reg_dac: regulator-dac {
+		compatible = "regulator-fixed";
+		regulator-name = "vref_dac";
+		regulator-min-microvolt = <20000>;
+		regulator-max-microvolt = <20000>;
+		vin-supply = <&reg_5p0> ;
+		regulator-boot-on;
+	};
+
+	reg_sw4: regulator-sw4 {
+		compatible = "regulator-fixed";
+		regulator-name = "SW4_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_5p0>;
+	};
+
+	reg_sys: regulator-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "SYS_4V2";
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+		regulator-always-on;
+		vin-supply = <&reg_5p0>;
+	};
+};
+
+&reg_arm {
+	vin-supply = <&sw2_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&sw1c_reg>;
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&reg_vsnvs>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&reg_vsnvs>;
+};
+
+&reg_vdd3p0 {
+	vin-supply = <&reg_vsnvs>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	clocks = <&clks IMX6QDL_CLK_ENET>,
+		<&clks IMX6QDL_CLK_ENET>,
+		<&clks IMX6QDL_CLK_ENET>,
+		<&clks IMX6QDL_CLK_ENET_REF>;
+	clock-names = "ipg", "ahb", "ptp", "enet_out";
+	phy-mode = "rmii";
+	phy-supply = <&reg_sw4>;
+	phy-handle = <&ethphy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+			smsc,disable-energy-detect;
+		};
+	};
+};
+
+&gpu_vg {
+	status = "disabled";
+};
+
+&gpu_2d {
+	status = "disabled";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1c_reg: sw1c {
+				regulator-name = "VDD_SOC (sw1abc)";
+				regulator-min-microvolt = <1275000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-name = "VDD_ARM (sw2)";
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw3a_reg: sw3a {
+				compatible = "regulator-fixed";
+				regulator-name = "DDR_1V5a";
+				regulator-boot-on;
+				regulator-always-on;
+
+			};
+
+			sw3b_reg: sw3b {
+				compatible = "regulator-fixed";
+				regulator-name = "DDR_1V5b";
+				regulator-boot-on;
+				regulator-always-on;
+
+			};
+
+			sw4_reg: sw4 {
+				regulator-name = "AUX 3V15 (sw4)";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				regulator-boot-on;
+				regulator-always-on;
+				status = "disabled";
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	lm75: sensor@49 {
+		compatible = "national,lm75b";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lm75>;
+		reg = <0x49>;
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	rtc: rtc@51 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	eeprom_ext: eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	usb3503: usb@8 {
+		compatible = "smsc,usb3503";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb3503>;
+		reg = <0x08>;
+		connect-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; /* Old: 0, SS: HIGH */
+		intn-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; /* Old: 1, SS: HIGH */
+		reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>; /* Old: 0, SS: HIGH */
+		initial-mode = <1>;
+		clocks = <&refclk>;
+		clock-names = "refclk";
+		refclk-frequency = <12000000>;
+	};
+
+	exc3000: touchscreen@2a {
+		compatible = "eeti,exc3000";
+		reg = <0x2a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ctouch>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		touchscreen-size-x = <4096>;
+		touchscreen-size-y = <4096>;
+	};
+
+	vcnl4035: light-sensor@60 {
+		compatible = "vishay,vcnl4035";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_proximity>;
+		reg = <0x60>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm3 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	rts-gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+	linux,rs485-enabled-at-boot-time;
+	rs485-rx-during-tx;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbh2 {
+	pinctrl-names = "idle", "active";
+	pinctrl-0 = <&pinctrl_usbh2_idle>;
+	pinctrl-1 = <&pinctrl_usbh2_active>;
+	vbus-supply = <&reg_usb_h2_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	vbus-supply = <&reg_usb_otg_vbus>;
+	disable-over-current;
+	dr_mode = "otg";
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbphynop1 {
+	clocks = <&clks IMX6QDL_CLK_USBPHY1>;
+	clock-names = "main_clk";
+	vcc-supply = <&reg_usb_h1_vbus>;
+};
+
+&usbphynop2 {
+	vcc-supply = <&reg_usb_h2_vbus>;
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	voltage-ranges = <3300 3300>;
+	vmmc-supply = <&reg_sw4>;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	keep-power-in-suspend;
+	voltage-ranges = <3300 3300>;
+	vmmc-supply = <&reg_sw4>;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog1>;
+	fsl,ext-reset-output;
+	timeout-sec = <10>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23	0x1b0b0	/* FEC INT */
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x0001b098
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x0001b098
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x0001b098
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+		>;
+	};
+
+	pinctrl_reset_gpio_led: reset-gpio-led-grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b810
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b810
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL  0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_lcd_enable: lcdenablegrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23  0x1b0b0 /* lcd enable */
+			MX6QDL_PAD_EIM_D16__GPIO3_IO16  0x1b0b0 /* sel6_8 */
+		>;
+	};
+
+	pinctrl_lm75: lm75grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+		>;
+	};
+
+	pinctrl_proximity: proximitygrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11  0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x0001b0b0
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x0001b0b0
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x0001b0b0
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x0001b0b0
+		>;
+	};
+
+	pinctrl_rtc: rtc-grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x1b0b0 /* RTC INT */
+		>;
+	};
+
+	pinctrl_ctouch: ctouch-grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 /* CTOUCH_INT */
+			MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x0001b0b0 /* CTOUCH_RESET */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x0001b0b0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA 0x1b0b1
+			MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D28__UART2_CTS_B 0x1b0b1
+			MX6QDL_PAD_EIM_D29__UART2_RTS_B 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh2_idle: usbh2-idle-grp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TXC__USB_H2_DATA      0x00013018
+			MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x00013018
+		>;
+	};
+
+	pinctrl_usbh2_active: usbh2-active-grp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TXC__USB_H2_DATA      0x00013018
+			MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x00017018
+		>;
+	};
+
+	pinctrl_usb3503: usb3503-grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1    0x00000018
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12     0x1b0b0 /* USB INT */
+			MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x0001b0b0 /* USB Reset */
+			MX6QDL_PAD_SD1_DAT0__GPIO1_IO16    0x1b0b0 /* USB Connect */
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x00017069
+			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x00010038
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x00017069
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x00017069
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x00017069
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x00017069
+			MX6QDL_PAD_GPIO_4__SD2_CD_B    0x0001b0b0
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD    0x00017059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK    0x00010059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x00017059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x00017059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x00017059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x00017059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x00017059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x00017059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x00017059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x00017059
+		>;
+	};
+
+	pinctrl_wdog1: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__WDOG1_B 0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
index 10922375c51e..ead83091e193 100644
--- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi
+++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
@@ -160,7 +160,7 @@
 	pinctrl-0 = <&pinctrl_ecspi5>;
 	status = "okay";
 
-	m25_eeprom: m25p80@0 {
+	m25_eeprom: flash@0 {
 		compatible = "atmel,at25";
 		spi-max-frequency = <10000000>;
 		size = <0x8000>;
diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts
index bfb530f29d9d..1ad41c944b4b 100644
--- a/arch/arm/boot/dts/imx6q-cm-fx6.dts
+++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts
@@ -260,7 +260,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	m25p80@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "st,m25p", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
index c713ac03b3b9..9591848cbd37 100644
--- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
+++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
@@ -102,7 +102,7 @@
 	cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "m25p80", "jedec,spi-nor";
 		spi-max-frequency = <40000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/imx6q-dms-ba16.dts b/arch/arm/boot/dts/imx6q-dms-ba16.dts
index 48fb47e715f6..137db38f0d27 100644
--- a/arch/arm/boot/dts/imx6q-dms-ba16.dts
+++ b/arch/arm/boot/dts/imx6q-dms-ba16.dts
@@ -47,7 +47,7 @@
 	pinctrl-0 = <&pinctrl_ecspi5>;
 	status = "okay";
 
-	m25_eeprom: m25p80@0 {
+	m25_eeprom: flash@0 {
 		compatible = "atmel,at25256B", "atmel,at25";
 		spi-max-frequency = <20000000>;
 		size = <0x8000>;
diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts
index c63f371ede8b..78d941fef5df 100644
--- a/arch/arm/boot/dts/imx6q-evi.dts
+++ b/arch/arm/boot/dts/imx6q-evi.dts
@@ -146,6 +146,7 @@
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
 	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
diff --git a/arch/arm/boot/dts/imx6q-gk802.dts b/arch/arm/boot/dts/imx6q-gk802.dts
index ccc2487d47ca..2fda68f9d3f6 100644
--- a/arch/arm/boot/dts/imx6q-gk802.dts
+++ b/arch/arm/boot/dts/imx6q-gk802.dts
@@ -1,10 +1,5 @@
-/*
- * Copyright (C) 2013 Philipp Zabel
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2013 Philipp Zabel
 
 /dts-v1/;
 #include <dt-bindings/gpio/gpio.h>
diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts
index 4cde45d5c90c..e894faba571f 100644
--- a/arch/arm/boot/dts/imx6q-gw5400-a.dts
+++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts
@@ -137,7 +137,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "sst,w25q256", "jedec,spi-nor";
 		spi-max-frequency = <30000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/imx6q-marsboard.dts b/arch/arm/boot/dts/imx6q-marsboard.dts
index 05ee28388229..cc1801002394 100644
--- a/arch/arm/boot/dts/imx6q-marsboard.dts
+++ b/arch/arm/boot/dts/imx6q-marsboard.dts
@@ -100,7 +100,7 @@
 	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
-	m25p80@0 {
+	flash@0 {
 		compatible = "microchip,sst25vf016b";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/imx6q-mccmon6.dts b/arch/arm/boot/dts/imx6q-mccmon6.dts
index 55692c73943d..f08b37010291 100644
--- a/arch/arm/boot/dts/imx6q-mccmon6.dts
+++ b/arch/arm/boot/dts/imx6q-mccmon6.dts
@@ -100,8 +100,10 @@
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
 	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts
index 225cf6b7a7a4..ee8c0bd3ecfd 100644
--- a/arch/arm/boot/dts/imx6q-novena.dts
+++ b/arch/arm/boot/dts/imx6q-novena.dts
@@ -86,7 +86,7 @@
 			linux,code = <KEY_POWER>;
 		};
 
-		lid {
+		lid-event {
 			label = "Lid";
 			gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
 			linux,input-type = <5>;	/* EV_SW */
@@ -99,7 +99,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_leds_novena>;
 
-		heartbeat {
+		led-heartbeat {
 			label = "novena:white:panel";
 			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
diff --git a/arch/arm/boot/dts/imx6q-pistachio.dts b/arch/arm/boot/dts/imx6q-pistachio.dts
index 7a33e54cc0f1..bad8d831e64e 100644
--- a/arch/arm/boot/dts/imx6q-pistachio.dts
+++ b/arch/arm/boot/dts/imx6q-pistachio.dts
@@ -100,7 +100,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
 			wakeup-source;
diff --git a/arch/arm/boot/dts/imx6q-prti6q.dts b/arch/arm/boot/dts/imx6q-prti6q.dts
index b4605edfd2ab..d8fa83effd63 100644
--- a/arch/arm/boot/dts/imx6q-prti6q.dts
+++ b/arch/arm/boot/dts/imx6q-prti6q.dts
@@ -364,8 +364,8 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_wifi>;
 		interrupts-extended = <&gpio1 30 IRQ_TYPE_LEVEL_HIGH>;
-		ref-clock-frequency = "38400000";
-		tcxo-clock-frequency = "19200000";
+		ref-clock-frequency = <38400000>;
+		tcxo-clock-frequency = <19200000>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx6q-rex-pro.dts b/arch/arm/boot/dts/imx6q-rex-pro.dts
index 1767e1a3cd53..271f4b2d9b9f 100644
--- a/arch/arm/boot/dts/imx6q-rex-pro.dts
+++ b/arch/arm/boot/dts/imx6q-rex-pro.dts
@@ -19,7 +19,7 @@
 };
 
 &ecspi3 {
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "sst,sst25vf032b", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index dc51262e7b2f..7c6a2f234ccb 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -1,43 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright 2011 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/imx6q-skov-reve-mi1010ait-1cp1.dts b/arch/arm/boot/dts/imx6q-skov-reve-mi1010ait-1cp1.dts
index 7f1f19b74bfa..a3f247c722b4 100644
--- a/arch/arm/boot/dts/imx6q-skov-reve-mi1010ait-1cp1.dts
+++ b/arch/arm/boot/dts/imx6q-skov-reve-mi1010ait-1cp1.dts
@@ -125,3 +125,9 @@
 		>;
 	};
 };
+
+&reg_tft_vcom {
+	regulator-min-microvolt = <3160000>;
+	regulator-max-microvolt = <3160000>;
+	voltage-table = <3160000 73>;
+};
diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts
index 343364d3e4f7..8daef65d5bb3 100644
--- a/arch/arm/boot/dts/imx6q-tbs2910.dts
+++ b/arch/arm/boot/dts/imx6q-tbs2910.dts
@@ -159,7 +159,7 @@
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
-	rtc: ds1307@68 {
+	rtc: rtc@68 {
 		compatible = "dallas,ds1307";
 		reg = <0x68>;
 	};
diff --git a/arch/arm/boot/dts/imx6q-utilite-pro.dts b/arch/arm/boot/dts/imx6q-utilite-pro.dts
index d16ff2083d62..ad59b23ef27a 100644
--- a/arch/arm/boot/dts/imx6q-utilite-pro.dts
+++ b/arch/arm/boot/dts/imx6q-utilite-pro.dts
@@ -89,7 +89,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
diff --git a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts
index 63550351340d..2290c1237634 100644
--- a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts
+++ b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts
@@ -28,7 +28,7 @@
 		compatible = "gpio-keys";
 		autorepeat;
 
-		back {
+		key-back {
 			gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_BACK>;
 			label = "Key Back";
@@ -37,7 +37,7 @@
 			wakeup-source;
 		};
 
-		home {
+		key-home {
 			gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
 			label = "Key Home";
@@ -46,7 +46,7 @@
 			wakeup-source;
 		};
 
-		menu {
+		key-menu {
 			gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_MENU>;
 			label = "Key Menu";
diff --git a/arch/arm/boot/dts/imx6q-vicut1.dts b/arch/arm/boot/dts/imx6q-vicut1.dts
index 0a4e251be162..dd91aff3f9e2 100644
--- a/arch/arm/boot/dts/imx6q-vicut1.dts
+++ b/arch/arm/boot/dts/imx6q-vicut1.dts
@@ -6,12 +6,9 @@
 /dts-v1/;
 #include "imx6q.dtsi"
 #include "imx6qdl-vicut1.dtsi"
+#include "imx6qdl-vicut1-12inch.dtsi"
 
 / {
 	model = "Kverneland UT1Q Board";
 	compatible = "kvg,vicut1q", "fsl,imx6q";
 };
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-yapp4-crux.dts b/arch/arm/boot/dts/imx6q-yapp4-crux.dts
index 15f4824a5142..bddf3822ebf7 100644
--- a/arch/arm/boot/dts/imx6q-yapp4-crux.dts
+++ b/arch/arm/boot/dts/imx6q-yapp4-crux.dts
@@ -33,6 +33,10 @@
 	status = "okay";
 };
 
+&reg_pu {
+	regulator-always-on;
+};
+
 &reg_usb_h1_vbus {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 9caba4529c71..df86049a695b 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -159,14 +159,17 @@
 		};
 	};
 
-	soc {
+	soc: soc {
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x40000>;
+			ranges = <0 0x00900000 0x40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
-		bus@2000000 { /* AIPS1 */
+		aips1: bus@2000000 { /* AIPS1 */
 			spba-bus@2000000 {
 				ecspi5: spi@2018000 {
 					#address-cells = <1>;
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index ed2739e39085..7c17b91f0965 100644
--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -1,11 +1,12 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2014-2020 Toradex
+ * Copyright 2014-2022 Toradex
  * Copyright 2012 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
 
 / {
 	model = "Toradex Apalis iMX6Q/D Module";
@@ -19,88 +20,182 @@
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
+		brightness-levels = <0 45 63 88 119 158 203 255>;
+		default-brightness-level = <4>;
+		enable-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_bl_on>;
-		pwms = <&pwm4 0 5000000>;
-		enable-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_module_3v3>;
+		pwms = <&pwm4 0 5000000 PWM_POLARITY_INVERTED>;
+		status = "disabled";
+	};
+
+	clk_ov5640_osc: clk-ov5640-osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		wakeup {
+			debounce-interval = <10>;
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+			label = "Wake-Up";
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	lcd_display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
+		status = "disabled";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di1_disp1>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel_dpi: panel-dpi {
+		compatible = "edt,et057090dhu";
+		backlight = <&backlight>;
+
+		status = "disabled";
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	panel_lvds: panel-lvds {
+		compatible = "panel-lvds";
+		backlight = <&backlight>;
 		status = "disabled";
+
+		port {
+			lvds_panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
 	};
 
 	reg_module_3v3: regulator-module-3v3 {
 		compatible = "regulator-fixed";
-		regulator-name = "+V3.3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
 		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3";
 	};
 
 	reg_module_3v3_audio: regulator-module-3v3-audio {
 		compatible = "regulator-fixed";
-		regulator-name = "+V3.3_AUDIO";
-		regulator-min-microvolt = <3300000>;
+		regulator-always-on;
 		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3_AUDIO";
+	};
+
+	reg_ov5640_1v8_d_o_vdd: regulator-ov5640-1v8-d-o-vdd {
+		compatible = "regulator-fixed";
 		regulator-always-on;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "DOVDD/DVDD_1.8V";
+		/* Note: The CSI module uses on-board 3.3V_SW supply */
+		vin-supply = <&reg_module_3v3>;
+	};
+
+	reg_ov5640_2v8_a_vdd: regulator-ov5640-2v8-a-vdd {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <2800000>;
+		regulator-min-microvolt = <2800000>;
+		regulator-name = "AVDD/AFVDD_2.8V";
+		/* Note: The CSI module uses on-board 3.3V_SW supply */
+		vin-supply = <&reg_module_3v3>;
 	};
 
 	reg_usb_otg_vbus: regulator-usb-otg-vbus {
 		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_regulator_usbotg_pwr>;
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb_otg_vbus";
 		status = "disabled";
 	};
 
 	/* on module USB hub */
 	reg_usb_host_vbus_hub: regulator-usb-host-vbus-hub {
 		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_regulator_usbhub_pwr>;
-		regulator-name = "usb_host_vbus_hub";
-		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb_host_vbus_hub";
 		startup-delay-us = <2000>;
-		enable-active-high;
 		status = "okay";
 	};
 
 	reg_usb_host_vbus: regulator-usb-host-vbus {
 		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio =  <&gpio1 0 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
-		regulator-name = "usb_host_vbus";
-		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio =  <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb_host_vbus";
 		vin-supply = <&reg_usb_host_vbus_hub>;
 		status = "disabled";
 	};
 
 	sound {
 		compatible = "fsl,imx-audio-sgtl5000";
-		model = "imx6q-apalis-sgtl5000";
-		ssi-controller = <&ssi1>;
 		audio-codec = <&codec>;
 		audio-routing =
 			"LINE_IN", "Line In Jack",
 			"MIC_IN", "Mic Jack",
 			"Mic Jack", "Mic Bias",
 			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
+		model = "imx6q-apalis-sgtl5000";
 		mux-ext-port = <4>;
+		mux-int-port = <1>;
+		ssi-controller = <&ssi1>;
 	};
 
 	sound_spdif: sound-spdif {
 		compatible = "fsl,imx-audio-spdif";
-		model = "imx-spdif";
 		spdif-controller = <&spdif>;
 		spdif-in;
 		spdif-out;
+		model = "imx-spdif";
 		status = "disabled";
 	};
 };
@@ -125,6 +220,10 @@
 	status = "disabled";
 };
 
+&clks {
+	fsl,pmic-stby-poweroff;
+};
+
 /* Apalis SPI1 */
 &ecspi1 {
 	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
@@ -141,6 +240,214 @@
 	status = "disabled";
 };
 
+&gpio1 {
+	gpio-line-names = "MXM3_84",
+			  "MXM3_4",
+			  "MXM3_15/GPIO7",
+			  "MXM3_96",
+			  "MXM3_37",
+			  "",
+			  "MXM3_17/GPIO8",
+			  "MXM3_14",
+			  "MXM3_12",
+			  "MXM3_2",
+			  "MXM3_184",
+			  "MXM3_180",
+			  "MXM3_178",
+			  "MXM3_176",
+			  "MXM3_188",
+			  "MXM3_186",
+			  "MXM3_160",
+			  "MXM3_162",
+			  "MXM3_150",
+			  "MXM3_144",
+			  "MXM3_154",
+			  "MXM3_146",
+			  "",
+			  "",
+			  "MXM3_72";
+};
+
+&gpio2 {
+	gpio-line-names = "MXM3_148",
+			  "MXM3_152",
+			  "MXM3_156",
+			  "MXM3_158",
+			  "MXM3_1/GPIO1",
+			  "MXM3_3/GPIO2",
+			  "MXM3_5/GPIO3",
+			  "MXM3_7/GPIO4",
+			  "MXM3_95",
+			  "MXM3_6",
+			  "MXM3_8",
+			  "MXM3_123",
+			  "MXM3_126",
+			  "MXM3_128",
+			  "MXM3_130",
+			  "MXM3_132",
+			  "MXM3_253",
+			  "MXM3_251",
+			  "MXM3_283",
+			  "MXM3_281",
+			  "MXM3_279",
+			  "MXM3_277",
+			  "MXM3_243",
+			  "MXM3_235",
+			  "MXM3_231",
+			  "MXM3_229",
+			  "MXM3_233",
+			  "MXM3_198",
+			  "MXM3_275",
+			  "MXM3_273",
+			  "MXM3_207",
+			  "MXM3_122";
+};
+
+&gpio3 {
+	gpio-line-names = "MXM3_271",
+			  "MXM3_269",
+			  "MXM3_301",
+			  "MXM3_299",
+			  "MXM3_297",
+			  "MXM3_295",
+			  "MXM3_293",
+			  "MXM3_291",
+			  "MXM3_289",
+			  "MXM3_287",
+			  "MXM3_249",
+			  "MXM3_247",
+			  "MXM3_245",
+			  "MXM3_286",
+			  "MXM3_239",
+			  "MXM3_35",
+			  "MXM3_205",
+			  "MXM3_203",
+			  "MXM3_201",
+			  "MXM3_116",
+			  "MXM3_114",
+			  "MXM3_262",
+			  "MXM3_274",
+			  "MXM3_124",
+			  "MXM3_110",
+			  "MXM3_120",
+			  "MXM3_263",
+			  "MXM3_265",
+			  "",
+			  "MXM3_135",
+			  "MXM3_261",
+			  "MXM3_259";
+};
+
+&gpio4 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_194",
+			  "MXM3_136",
+			  "MXM3_134",
+			  "MXM3_140",
+			  "MXM3_138",
+			  "",
+			  "MXM3_220",
+			  "",
+			  "",
+			  "MXM3_18",
+			  "MXM3_16",
+			  "",
+			  "",
+			  "MXM3_214",
+			  "MXM3_216",
+			  "MXM3_164";
+};
+
+&gpio5 {
+	gpio-line-names = "MXM3_159",
+			  "",
+			  "",
+			  "",
+			  "MXM3_257",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_200",
+			  "MXM3_196",
+			  "MXM3_204",
+			  "MXM3_202",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_191",
+			  "MXM3_197",
+			  "MXM3_77",
+			  "MXM3_195",
+			  "MXM3_221",
+			  "MXM3_225",
+			  "MXM3_223",
+			  "MXM3_227",
+			  "MXM3_209",
+			  "MXM3_211",
+			  "MXM3_118",
+			  "MXM3_112",
+			  "MXM3_187",
+			  "MXM3_185";
+};
+
+&gpio6 {
+	gpio-line-names = "MXM3_183",
+			  "MXM3_181",
+			  "MXM3_179",
+			  "MXM3_177",
+			  "MXM3_175",
+			  "MXM3_173",
+			  "MXM3_255",
+			  "MXM3_83",
+			  "MXM3_91",
+			  "MXM3_13/GPIO6",
+			  "MXM3_11/GPIO5",
+			  "MXM3_79",
+			  "",
+			  "",
+			  "MXM3_190",
+			  "MXM3_193",
+			  "MXM3_89";
+};
+
+&gpio7 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_99",
+			  "MXM3_85",
+			  "MXM3_217",
+			  "MXM3_215";
+};
+
+&gpr {
+	ipu1_csi0_mux {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		port@1 {
+			reg = <1>;
+			ipu1_csi0_mux_from_parallel_sensor: endpoint {
+				remote-endpoint = <&adv7280_to_ipu1_csi0_mux>;
+			};
+		};
+	};
+};
+
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
@@ -177,6 +484,16 @@
 	scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "disabled";
+
+	atmel_mxt_ts: touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		/* These GPIOs are muxed with the iomuxc node */
+		interrupt-parent = <&gpio6>;
+		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;	/* MXM3_11 */
+		reg = <0x4a>;
+		reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>;	/* MXM3_13 */
+		status = "disabled";
+	};
 };
 
 /*
@@ -192,101 +509,105 @@
 	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
+		fsl,pmic-stby-poweroff;
 		reg = <0x08>;
 
 		regulators {
 			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1875000>;
+				regulator-min-microvolt = <300000>;
 				regulator-ramp-delay = <6250>;
 			};
 
 			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1875000>;
+				regulator-min-microvolt = <300000>;
 				regulator-ramp-delay = <6250>;
 			};
 
 			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1975000>;
+				regulator-min-microvolt = <400000>;
 			};
 
 			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <5150000>;
+				regulator-min-microvolt = <5000000>;
 			};
 
 			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3000000>;
+				regulator-min-microvolt = <1000000>;
 			};
 
 			vref_reg: vrefddr {
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
 			};
 
 			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1550000>;
+				regulator-min-microvolt = <800000>;
 			};
 
 			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1550000>;
+				regulator-min-microvolt = <800000>;
 			};
 
 			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
 			};
 
 			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
 			};
 
 			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
 			};
 
 			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
 			};
 		};
 	};
 
 	codec: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		clocks = <&clks IMX6QDL_CLK_CKO>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
+		reg = <0x0a>;
 		VDDA-supply = <&reg_module_3v3_audio>;
 		VDDIO-supply = <&reg_module_3v3>;
 		VDDD-supply = <&vgen4_reg>;
@@ -295,15 +616,15 @@
 	/* STMPE811 touch screen controller */
 	stmpe811@41 {
 		compatible = "st,stmpe811";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_touch_int>;
-		reg = <0x41>;
+		blocks = <0x5>;
+		id = <0>;
 		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-parent = <&gpio4>;
 		interrupt-controller;
-		id = <0>;
-		blocks = <0x5>;
+		interrupt-parent = <&gpio4>;
 		irq-trigger = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch_int>;
+		reg = <0x41>;
 		/* 3.25 MHz ADC clock speed */
 		st,adc-freq = <1>;
 		/* 12-bit ADC */
@@ -313,7 +634,7 @@
 		/* ADC conversion time: 80 clocks */
 		st,sample-time = <4>;
 
-		stmpe_touchscreen: stmpe-touchscreen {
+		stmpe_ts: stmpe_touchscreen {
 			compatible = "st,stmpe-ts";
 			/* 8 sample average control */
 			st,ave-ctrl = <3>;
@@ -328,13 +649,14 @@
 			st,settling = <3>;
 			/* 5 ms touch detect interrupt delay */
 			st,touch-det-delay = <5>;
+			status = "disabled";
 		};
 
-		stmpe_adc: stmpe-adc {
+		stmpe_adc: stmpe_adc {
 			compatible = "st,stmpe-adc";
+			#io-channel-cells = <1>;
 			/* forbid to use ADC channels 3-0 (touch) */
 			st,norequest-mask = <0x0F>;
-			#io-channel-cells = <1>;
 		};
 	};
 };
@@ -351,6 +673,90 @@
 	scl-gpios = <&gpio3 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpio3 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "disabled";
+
+	adv_7280: adv7280@21 {
+		compatible = "adi,adv7280";
+		adv,force-bt656-4;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1_csi0>;
+		reg = <0x21>;
+		status = "disabled";
+
+		port {
+			adv7280_to_ipu1_csi0_mux: endpoint {
+				bus-width = <8>;
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+			};
+		};
+	};
+
+	ov5640_csi_cam: ov5640_mipi@3c {
+		compatible = "ovti,ov5640";
+		AVDD-supply = <&reg_ov5640_2v8_a_vdd>;
+		DOVDD-supply = <&reg_ov5640_1v8_d_o_vdd>;
+		DVDD-supply = <&reg_ov5640_1v8_d_o_vdd>;
+		clock-names = "xclk";
+		clocks = <&clks IMX6QDL_CLK_CKO2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cam_mclk>;
+		/* These GPIOs are muxed with the iomuxc node */
+		powerdown-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+		reg = <0x3c>;
+		reset-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+		status = "disabled";
+
+		port {
+			ov5640_to_mipi_csi2: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&mipi_csi_from_ov5640>;
+			};
+		};
+	};
+};
+
+&ipu1_di1_disp1 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&ldb {
+	lvds-channel@0 {
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&lvds_panel_in>;
+			};
+		};
+	};
+
+	lvds-channel@1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+
+		port@4 {
+			reg = <4>;
+
+			lvds1_out: endpoint {
+			};
+		};
+	};
+};
+
+&mipi_csi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "disabled";
+
+	port@0 {
+		reg = <0>;
+
+		mipi_csi_from_ov5640: endpoint {
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+			remote-endpoint = <&ov5640_to_mipi_csi2>;
+		};
+	};
 };
 
 &pwm1 {
@@ -372,7 +778,6 @@
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "disabled";
@@ -389,72 +794,73 @@
 };
 
 &uart1 {
+	fsl,dte-mode;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>;
-	fsl,dte-mode;
 	uart-has-rtscts;
 	status = "disabled";
 };
 
 &uart2 {
+	fsl,dte-mode;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2_dte>;
-	fsl,dte-mode;
 	uart-has-rtscts;
 	status = "disabled";
 };
 
 &uart4 {
+	fsl,dte-mode;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart4_dte>;
-	fsl,dte-mode;
 	status = "disabled";
 };
 
 &uart5 {
+	fsl,dte-mode;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart5_dte>;
-	fsl,dte-mode;
 	status = "disabled";
 };
 
 &usbotg {
+	disable-over-current;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
 	status = "disabled";
 };
 
 /* MMC1 */
 &usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit>;
-	vqmmc-supply = <&reg_module_3v3>;
 	bus-width = <8>;
+	cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
 	disable-wp;
 	no-1-8-v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit &pinctrl_mmc_cd>;
+	vqmmc-supply = <&reg_module_3v3>;
 	status = "disabled";
 };
 
 /* SD1 */
 &usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	vqmmc-supply = <&reg_module_3v3>;
 	bus-width = <4>;
 	disable-wp;
 	no-1-8-v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vqmmc-supply = <&reg_module_3v3>;
 	status = "disabled";
 };
 
 /* eMMC */
 &usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	vqmmc-supply = <&reg_module_3v3>;
 	bus-width = <8>;
 	no-1-8-v;
 	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	vqmmc-supply = <&reg_module_3v3>;
 	status = "okay";
 };
 
@@ -463,49 +869,57 @@
 };
 
 &iomuxc {
-	pinctrl_apalis_gpio1: gpio2io04grp {
+	/* Mux the Apalis GPIOs */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2
+		     &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4
+		     &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6
+		     &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8
+		    >;
+
+	pinctrl_apalis_gpio1: apalisgpio1grp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x130b0
 		>;
 	};
 
-	pinctrl_apalis_gpio2: gpio2io05grp {
+	pinctrl_apalis_gpio2: apalisgpio2grp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x130b0
 		>;
 	};
 
-	pinctrl_apalis_gpio3: gpio2io06grp {
+	pinctrl_apalis_gpio3: apalisgpio3grp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x130b0
 		>;
 	};
 
-	pinctrl_apalis_gpio4: gpio2io07grp {
+	pinctrl_apalis_gpio4: apalisgpio4grp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x130b0
 		>;
 	};
 
-	pinctrl_apalis_gpio5: gpio6io10grp {
+	pinctrl_apalis_gpio5: apalisgpio5grp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x130b0
 		>;
 	};
 
-	pinctrl_apalis_gpio6: gpio6io09grp {
+	pinctrl_apalis_gpio6: apalisgpio6grp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x130b0
 		>;
 	};
 
-	pinctrl_apalis_gpio7: gpio1io02grp {
+	pinctrl_apalis_gpio7: apalisgpio7grp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x130b0
 		>;
 	};
 
-	pinctrl_apalis_gpio8: gpio1io06grp {
+	pinctrl_apalis_gpio8: apalisgpio8grp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x130b0
 		>;
@@ -517,8 +931,6 @@
 			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD	0x130b0
 			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS	0x130b0
 			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD	0x130b0
-			/* SGTL5000 sys_mclk */
-			MX6QDL_PAD_GPIO_5__CCM_CLKO1		0x130b0
 		>;
 	};
 
@@ -600,7 +1012,7 @@
 		>;
 	};
 
-	pinctrl_gpio_bl_on: gpioblon {
+	pinctrl_gpio_bl_on: gpioblongrp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b0
 		>;
@@ -745,7 +1157,7 @@
 		>;
 	};
 
-	pinctrl_mmc_cd: gpiommccdgrp {
+	pinctrl_mmc_cd: mmccdgrp {
 		fsl,pins = <
 			 /* MMC1 CD */
 			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x000b0
@@ -776,41 +1188,47 @@
 		>;
 	};
 
-	pinctrl_regulator_usbh_pwr: gpioregusbhpwrgrp {
+	pinctrl_regulator_usbh_pwr: regusbhpwrgrp {
 		fsl,pins = <
 			/* USBH_EN */
 			MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x0f058
 		>;
 	};
 
-	pinctrl_regulator_usbhub_pwr: gpioregusbhubpwrgrp {
+	pinctrl_regulator_usbhub_pwr: regusbhubpwrgrp {
 		fsl,pins = <
 			/* USBH_HUB_EN */
 			MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x0f058
 		>;
 	};
 
-	pinctrl_regulator_usbotg_pwr: gpioregusbotgpwrgrp {
+	pinctrl_regulator_usbotg_pwr: regusbotgpwrgrp {
 		fsl,pins = <
 			/* USBO1 power en */
 			MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x0f058
 		>;
 	};
 
-	pinctrl_reset_moci: gpioresetmocigrp {
+	pinctrl_reset_moci: resetmocigrp {
 		fsl,pins = <
 			/* RESET_MOCI control */
 			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x0f058
 		>;
 	};
 
-	pinctrl_sd_cd: gpiosdcdgrp {
+	pinctrl_sd_cd: sdcdgrp {
 		fsl,pins = <
 			/* SD1 CD */
 			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x000b0
 		>;
 	};
 
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__CCM_CLKO1	0x130b0
+		>;
+	};
+
 	pinctrl_spdif: spdifgrp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_16__SPDIF_IN  0x1b0b0
@@ -818,13 +1236,22 @@
 		>;
 	};
 
-	pinctrl_touch_int: gpiotouchintgrp {
+	pinctrl_touch_int: touchintgrp {
 		fsl,pins = <
 			/* STMPE811 interrupt */
 			MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
 		>;
 	};
 
+	/* Additional DTR, DSR, DCD */
+	pinctrl_uart1_ctrl: uart1ctrlgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0
+			MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0
+			MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0
+		>;
+	};
+
 	pinctrl_uart1_dce: uart1dcegrp {
 		fsl,pins = <
 			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
@@ -842,15 +1269,6 @@
 		>;
 	};
 
-	/* Additional DTR, DSR, DCD */
-	pinctrl_uart1_ctrl: uart1ctrlgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0
-			MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0
-			MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0
-		>;
-	};
-
 	pinctrl_uart2_dce: uart2dcegrp {
 		fsl,pins = <
 			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
@@ -904,7 +1322,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_4bit: usdhc1grp_4bit {
+	pinctrl_usdhc1_4bit: usdhc1-4bitgrp {
 		fsl,pins = <
 			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17071
 			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10071
@@ -915,7 +1333,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_8bit: usdhc1grp_8bit {
+	pinctrl_usdhc1_8bit: usdhc1-8bitgrp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x17071
 			MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x17071
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
index e21f6ac864e5..baa197c90060 100644
--- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
@@ -96,7 +96,7 @@
 	pinctrl-0 = <&pinctrl_ecspi4>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "micron,n25q128a11", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
index 563bf9d44fe0..6b64b2fc3995 100644
--- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
@@ -131,7 +131,7 @@
 	pinctrl-0 = <&pinctrl_ecspi4>;
 	status = "okay";
 
-	flash: m25p80@1 {
+	flash: flash@1 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "micron,n25q128a11", "jedec,spi-nor";
@@ -154,112 +154,112 @@
 		regulators {
 			bcore1 {
 				regulator-name = "bcore1";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			bcore2 {
 				regulator-name = "bcore2";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			bpro {
 				regulator-name = "bpro";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			bperi {
 				regulator-name = "bperi";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			bmem {
 				regulator-name = "bmem";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			ldo2 {
 				regulator-name = "ldo2";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <1800000>;
 			};
 
 			ldo3 {
 				regulator-name = "ldo3";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			ldo4 {
 				regulator-name = "ldo4";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			ldo5 {
 				regulator-name = "ldo5";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			ldo6 {
 				regulator-name = "ldo6";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			ldo7 {
 				regulator-name = "ldo7";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			ldo8 {
 				regulator-name = "ldo8";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			ldo9 {
 				regulator-name = "ldo9";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			ldo10 {
 				regulator-name = "ldo10";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			ldo11 {
 				regulator-name = "ldo11";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			bio {
 				regulator-name = "bio";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 			};
diff --git a/arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi b/arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi
deleted file mode 100644
index 7672fbfc29be..000000000000
--- a/arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi
+++ /dev/null
@@ -1,44 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/*
- * Copyright 2020 Toradex
- */
-
-&iomuxc {
-	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x170b1
-			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x100b1
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170b1
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170b1
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170b1
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170b1
-		>;
-	};
-
-	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x170f1
-			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x100f1
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f1
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f1
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f1
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f1
-		>;
-	};
-};
-
-/* Colibri MMC */
-&usdhc1 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>;
-	pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_mmc_cd>;
-	pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_mmc_cd>;
-	vmmc-supply = <&reg_module_3v3>;
-	vqmmc-supply = <&vgen3_reg>;
-	wakeup-source;
-	keep-power-in-suspend;
-	sd-uhs-sdr12;
-	sd-uhs-sdr25;
-	sd-uhs-sdr50;
-	sd-uhs-sdr104;
-};
diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
index 4e2a309c93fa..023e76215064 100644
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@@ -1,11 +1,12 @@
 // SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
- * Copyright 2014-2020 Toradex
+ * Copyright 2014-2022 Toradex
  * Copyright 2012 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
 
 / {
 	model = "Toradex Colibri iMX6DL/S Module";
@@ -13,11 +14,77 @@
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
+		brightness-levels = <0 45 63 88 119 158 203 255>;
+		default-brightness-level = <4>;
+		enable-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* Colibri BL_ON */
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_bl_on>;
-		pwms = <&pwm3 0 5000000>;
-		enable-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* Colibri BL_ON */
+		power-supply = <&reg_module_3v3>;
+		pwms = <&pwm3 0 5000000 PWM_POLARITY_INVERTED>;
+		status = "disabled";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		wakeup {
+			debounce-interval = <10>;
+			gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* SODIMM 45 */
+			label = "Wake-Up";
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	lcd_display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
+		status = "disabled";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+
+	panel_dpi: panel-dpi {
+		/*
+		 * edt,et057090dhu: EDT 5.7" LCD TFT
+		 * edt,et070080dh6: EDT 7.0" LCD TFT
+		 */
+		compatible = "edt,et057090dhu";
+		backlight = <&backlight>;
 		status = "disabled";
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
 	};
 
 	reg_module_3v3: regulator-module-3v3 {
@@ -38,36 +105,36 @@
 
 	reg_usb_host_vbus: regulator-usb-host-vbus {
 		compatible = "regulator-fixed";
+		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; /* USBH_PEN */
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
-		regulator-name = "usb_host_vbus";
-		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; /* USBH_PEN */
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb_host_vbus";
 		status = "disabled";
 	};
 
 	sound {
 		compatible = "fsl,imx-audio-sgtl5000";
-		model = "imx6dl-colibri-sgtl5000";
-		ssi-controller = <&ssi1>;
 		audio-codec = <&codec>;
 		audio-routing =
 			"Headphone Jack", "HP_OUT",
 			"LINE_IN", "Line In Jack",
 			"MIC_IN", "Mic Jack",
 			"Mic Jack", "Mic Bias";
+		model = "imx6dl-colibri-sgtl5000";
 		mux-int-port = <1>;
 		mux-ext-port = <5>;
+		ssi-controller = <&ssi1>;
 	};
 
 	/* Optional S/PDIF in on SODIMM 88 and out on SODIMM 90, 137 or 168 */
 	sound_spdif: sound-spdif {
 		compatible = "fsl,imx-audio-spdif";
-		model = "imx-spdif";
 		spdif-controller = <&spdif>;
 		spdif-in;
 		spdif-out;
+		model = "imx-spdif";
 		status = "disabled";
 	};
 };
@@ -92,6 +159,10 @@
 	status = "disabled";
 };
 
+&clks {
+	fsl,pmic-stby-poweroff;
+};
+
 /* Colibri SSP */
 &ecspi4 {
 	cs-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
@@ -101,10 +172,10 @@
 };
 
 &fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rmii";
 	phy-handle = <&ethphy>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
 	status = "okay";
 
 	mdio {
@@ -118,6 +189,224 @@
 	};
 };
 
+&gpio1 {
+	gpio-line-names = "",
+			  "SODIMM_67",
+			  "SODIMM_180",
+			  "SODIMM_196",
+			  "SODIMM_174",
+			  "SODIMM_176",
+			  "SODIMM_194",
+			  "SODIMM_55",
+			  "SODIMM_63",
+			  "SODIMM_28",
+			  "SODIMM_93",
+			  "SODIMM_69",
+			  "SODIMM_99",
+			  "SODIMM_130",
+			  "SODIMM_106",
+			  "SODIMM_98",
+			  "SODIMM_192",
+			  "SODIMM_49",
+			  "SODIMM_190",
+			  "SODIMM_51",
+			  "SODIMM_47",
+			  "SODIMM_53",
+			  "",
+			  "SODIMM_22";
+};
+
+&gpio2 {
+	gpio-line-names = "SODIMM_132",
+			  "SODIMM_134",
+			  "SODIMM_135",
+			  "SODIMM_133",
+			  "SODIMM_102",
+			  "SODIMM_43",
+			  "SODIMM_127",
+			  "SODIMM_37",
+			  "SODIMM_104",
+			  "SODIMM_59",
+			  "SODIMM_30",
+			  "SODIMM_100",
+			  "SODIMM_38",
+			  "SODIMM_34",
+			  "SODIMM_32",
+			  "SODIMM_36",
+			  "SODIMM_59",
+			  "SODIMM_67",
+			  "SODIMM_97",
+			  "SODIMM_79",
+			  "SODIMM_103",
+			  "SODIMM_101",
+			  "SODIMM_45",
+			  "SODIMM_105",
+			  "SODIMM_107",
+			  "SODIMM_91",
+			  "SODIMM_89",
+			  "SODIMM_150",
+			  "SODIMM_126",
+			  "SODIMM_128",
+			  "",
+			  "SODIMM_94";
+};
+
+&gpio3 {
+	gpio-line-names = "SODIMM_111",
+			  "SODIMM_113",
+			  "SODIMM_115",
+			  "SODIMM_117",
+			  "SODIMM_119",
+			  "SODIMM_121",
+			  "SODIMM_123",
+			  "SODIMM_125",
+			  "SODIMM_110",
+			  "SODIMM_112",
+			  "SODIMM_114",
+			  "SODIMM_116",
+			  "SODIMM_118",
+			  "SODIMM_120",
+			  "SODIMM_122",
+			  "SODIMM_124",
+			  "",
+			  "SODIMM_96",
+			  "SODIMM_77",
+			  "SODIMM_25",
+			  "SODIMM_27",
+			  "SODIMM_88",
+			  "SODIMM_90",
+			  "SODIMM_31",
+			  "SODIMM_23",
+			  "SODIMM_29",
+			  "SODIMM_71",
+			  "SODIMM_73",
+			  "SODIMM_92",
+			  "SODIMM_81",
+			  "SODIMM_131",
+			  "SODIMM_129";
+};
+
+&gpio4 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_168",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_184",
+			  "SODIMM_186",
+			  "HDMI_15",
+			  "HDMI_16",
+			  "SODIMM_178",
+			  "SODIMM_188",
+			  "SODIMM_56",
+			  "SODIMM_44",
+			  "SODIMM_68",
+			  "SODIMM_82",
+			  "SODIMM_24",
+			  "SODIMM_76",
+			  "SODIMM_70",
+			  "SODIMM_60",
+			  "SODIMM_58",
+			  "SODIMM_78",
+			  "SODIMM_72",
+			  "SODIMM_80",
+			  "SODIMM_46",
+			  "SODIMM_62",
+			  "SODIMM_48",
+			  "SODIMM_74";
+};
+
+&gpio5 {
+	gpio-line-names = "SODIMM_95",
+			  "",
+			  "SODIMM_86",
+			  "",
+			  "SODIMM_65",
+			  "SODIMM_50",
+			  "SODIMM_52",
+			  "SODIMM_54",
+			  "SODIMM_66",
+			  "SODIMM_64",
+			  "SODIMM_57",
+			  "SODIMM_61",
+			  "SODIMM_136",
+			  "SODIMM_138",
+			  "SODIMM_140",
+			  "SODIMM_142",
+			  "SODIMM_144",
+			  "SODIMM_146",
+			  "SODIMM_172",
+			  "SODIMM_170",
+			  "SODIMM_149",
+			  "SODIMM_151",
+			  "SODIMM_153",
+			  "SODIMM_155",
+			  "SODIMM_157",
+			  "SODIMM_159",
+			  "SODIMM_161",
+			  "SODIMM_163",
+			  "SODIMM_33",
+			  "SODIMM_35",
+			  "SODIMM_165",
+			  "SODIMM_167";
+};
+
+&gpio6 {
+	gpio-line-names = "SODIMM_169",
+			  "SODIMM_171",
+			  "SODIMM_173",
+			  "SODIMM_175",
+			  "SODIMM_177",
+			  "SODIMM_179",
+			  "SODIMM_85",
+			  "SODIMM_166",
+			  "SODIMM_160",
+			  "SODIMM_162",
+			  "SODIMM_158",
+			  "SODIMM_164",
+			  "",
+			  "",
+			  "SODIMM_156",
+			  "SODIMM_75",
+			  "SODIMM_154",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_152";
+};
+
+&gpio7 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_19",
+			  "SODIMM_21",
+			  "",
+			  "SODIMM_137";
+};
+
 &hdmi {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hdmi_ddc>;
@@ -132,65 +421,66 @@
 	clock-frequency = <100000>;
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
-	pinctrl-0 = <&pinctrl_i2c2_gpio>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
 	scl-gpios = <&gpio2 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpio3 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
+		fsl,pmic-stby-poweroff;
 		reg = <0x08>;
 
 		regulators {
 			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1875000>;
+				regulator-min-microvolt = <300000>;
 				regulator-ramp-delay = <6250>;
 			};
 
 			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1875000>;
+				regulator-min-microvolt = <300000>;
 				regulator-ramp-delay = <6250>;
 			};
 
 			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1975000>;
+				regulator-min-microvolt = <400000>;
 			};
 
 			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <5150000>;
+				regulator-min-microvolt = <5000000>;
 			};
 
 			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3000000>;
+				regulator-min-microvolt = <1000000>;
 			};
 
 			vref_reg: vrefddr {
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
 			};
 
 			/* vgen1: unused */
 
 			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1550000>;
+				regulator-min-microvolt = <800000>;
 			};
 
 			/*
@@ -198,57 +488,60 @@
 			 * the i.MX 6 NVCC_SD1.
 			 */
 			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
 			};
 
 			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
 			};
 
 			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
 			};
 
 			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
 			};
 		};
 	};
 
 	codec: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
 		clocks = <&clks IMX6QDL_CLK_CKO>;
+		lrclk-strength = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		VDDA-supply = <&reg_module_3v3_audio>;
 		VDDIO-supply = <&reg_module_3v3>;
 		VDDD-supply = <&vgen4_reg>;
-		lrclk-strength = <3>;
 	};
 
 	/* STMPE811 touch screen controller */
 	stmpe811@41 {
 		compatible = "st,stmpe811";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_touch_int>;
-		reg = <0x41>;
+		blocks = <0x5>;
 		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-parent = <&gpio6>;
 		interrupt-controller;
 		id = <0>;
-		blocks = <0x5>;
 		irq-trigger = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch_int>;
+		reg = <0x41>;
 		/* 3.25 MHz ADC clock speed */
 		st,adc-freq = <1>;
 		/* 12-bit ADC */
@@ -258,7 +551,7 @@
 		/* ADC converstion time: 80 clocks */
 		st,sample-time = <4>;
 
-		stmpe_touchscreen {
+		stmpe_ts: stmpe_touchscreen {
 			compatible = "st,stmpe-ts";
 			/* 8 sample average control */
 			st,ave-ctrl = <3>;
@@ -273,9 +566,10 @@
 			st,settling = <3>;
 			/* 5 ms touch detect interrupt delay */
 			st,touch-det-delay = <5>;
+			status = "disabled";
 		};
 
-		stmpe_adc {
+		stmpe_adc: stmpe_adc {
 			compatible = "st,stmpe-adc";
 			/* forbid to use ADC channels 3-0 (touch) */
 			st,norequest-mask = <0x0F>;
@@ -294,6 +588,21 @@
 	scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "disabled";
+
+	atmel_mxt_ts: touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		interrupt-parent = <&gpio2>;
+		interrupts = <24 IRQ_TYPE_EDGE_FALLING>;	/* SODIMM 107 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_atmel_conn>;
+		reg = <0x4a>;
+		reset-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;	/* SODIMM 106 */
+		status = "disabled";
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
 };
 
 /* Colibri PWM<B> */
@@ -312,7 +621,6 @@
 
 /* Colibri PWM<A> */
 &pwm3 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "disabled";
@@ -338,27 +646,27 @@
 
 /* Colibri UART_A */
 &uart1 {
+	fsl,dte-mode;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>;
-	fsl,dte-mode;
 	uart-has-rtscts;
 	status = "disabled";
 };
 
 /* Colibri UART_B */
 &uart2 {
+	fsl,dte-mode;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2_dte>;
-	fsl,dte-mode;
 	uart-has-rtscts;
 	status = "disabled";
 };
 
 /* Colibri UART_C */
 &uart3 {
+	fsl,dte-mode;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3_dte>;
-	fsl,dte-mode;
 	status = "disabled";
 };
 
@@ -370,24 +678,28 @@
 
 /* Colibri MMC */
 &usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>;
 	cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */
-	disable-wp;
-	vqmmc-supply = <&reg_module_3v3>;
 	bus-width = <4>;
 	no-1-8-v;
+	disable-wp;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_mmc_cd>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_mmc_cd>;
+	pinctrl-3 = <&pinctrl_usdhc1_sleep &pinctrl_mmc_cd_sleep>;
+	vmmc-supply = <&reg_module_3v3>;
+	vqmmc-supply = <&vgen3_reg>;
 	status = "disabled";
 };
 
 /* eMMC */
 &usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	vqmmc-supply = <&reg_module_3v3>;
 	bus-width = <8>;
 	no-1-8-v;
 	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	vqmmc-supply = <&reg_module_3v3>;
 	status = "okay";
 };
 
@@ -405,14 +717,34 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbh_oc_1>;
 
+	/* Atmel MXT touchsceen + Capacitive Touch Adapter */
+	/* NOTE: This pin group conflicts with pin groups
+	 * pinctrl_pwm1/pinctrl_pwm4. Don't use them simultaneously.
+	 */
+	pinctrl_atmel_adap: atmeladaptergrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09   0xb0b1  /* SODIMM  28 */
+			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0xb0b1  /* SODIMM  30 */
+		>;
+	};
+
+	/* Atmel MXT touchsceen + boards with built-in Capacitive Touch Connector */
+	/* NOTE: This pin group conflicts with pin groups pinctrl_weim_cs1 and
+	 * pinctrl_weim_cs2. Don't use them simultaneously.
+	 */
+	pinctrl_atmel_conn: atmelconnectorgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_CS1__GPIO2_IO24  0xb0b1  /* SODIMM_107 */
+			MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0xb0b1  /* SODIMM_106 */
+		>;
+	};
+
 	pinctrl_audmux: audmuxgrp {
 		fsl,pins = <
 			MX6QDL_PAD_KEY_COL0__AUD5_TXC	0x130b0
 			MX6QDL_PAD_KEY_ROW0__AUD5_TXD	0x130b0
 			MX6QDL_PAD_KEY_COL1__AUD5_TXFS	0x130b0
 			MX6QDL_PAD_KEY_ROW1__AUD5_RXD	0x130b0
-			/* SGTL5000 sys_mclk */
-			MX6QDL_PAD_GPIO_0__CCM_CLKO1	0x000b0
 		>;
 	};
 
@@ -423,28 +755,52 @@
 		>;
 	};
 
+	/* CSI pins used as GPIOs */
+	pinctrl_csi_gpio_1: csigpio1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D18__GPIO3_IO18   0x1b0b0
+			MX6QDL_PAD_EIM_A19__GPIO2_IO19   0x1b0b0
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29   0x130b0
+			MX6QDL_PAD_EIM_A23__GPIO6_IO06   0x1b0b0
+			MX6QDL_PAD_EIM_A20__GPIO2_IO18   0x1b0b0
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21   0x1b0b0
+			MX6QDL_PAD_EIM_A18__GPIO2_IO20   0x1b0b0
+			MX6QDL_PAD_EIM_EB3__GPIO2_IO31   0x1b0b0
+			MX6QDL_PAD_EIM_D17__GPIO3_IO17   0x1b0b0
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0
+			MX6QDL_PAD_SD2_CMD__GPIO1_IO11   0x1b0b0
+			MX6QDL_PAD_SD2_DAT0__GPIO1_IO15  0x1b0b0
+		>;
+	};
+
+	pinctrl_csi_gpio_2: csigpio2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A24__GPIO5_IO04   0x1b0b0
+		>;
+	};
+
 	pinctrl_ecspi4: ecspi4grp {
 		fsl,pins = <
+			/* SPI CS */
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02	0x000b1
 			MX6QDL_PAD_EIM_D22__ECSPI4_MISO	0x100b1
 			MX6QDL_PAD_EIM_D28__ECSPI4_MOSI	0x100b1
 			MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
-			/* SPI CS */
-			MX6QDL_PAD_EIM_A25__GPIO5_IO02	0x000b1
 		>;
 	};
 
 	pinctrl_enet: enetgrp {
 		fsl,pins = <
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
 			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
 			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
 			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
 			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
-			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
 			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
 			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
 			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
-			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK     ((1<<30) | 0x1b0b0)
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	((1<<30) | 0x1b0b0)
 		>;
 	};
 
@@ -462,13 +818,32 @@
 		>;
 	};
 
-	pinctrl_gpio_bl_on: gpioblon {
+	pinctrl_gpio_1: gpio1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20     0x1b0b0
+			MX6QDL_PAD_EIM_D27__GPIO3_IO27      0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23 0x1b0b0
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03     0x1b0b0
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04     0x1b0b0
+			MX6QDL_PAD_NANDF_D6__GPIO2_IO06     0x1b0b0
+			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08     0x1b0b0
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11     0x1b0b0
+		>;
+	};
+	pinctrl_gpio_2: gpio2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07       0x1b0b0
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08       0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_bl_on: gpioblongrp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D26__GPIO3_IO26		0x1b0b0
 		>;
 	};
 
-	pinctrl_gpio_keys: gpiokeys {
+	pinctrl_gpio_keys: gpiokeysgrp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x130b0
 		>;
@@ -483,15 +858,15 @@
 
 	pinctrl_i2c2: i2c2grp {
 		fsl,pins = <
-			MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
 			MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
+			MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
 		>;
 	};
 
-	pinctrl_i2c2_gpio: i2c2grp {
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
 		fsl,pins = <
-			MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x4001b8b1
 			MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x4001b8b1
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x4001b8b1
 		>;
 	};
 
@@ -523,8 +898,8 @@
 			MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC	0xb0b1
 			MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC	0xb0b1
 			/* Disable PWM pins on camera interface */
-			MX6QDL_PAD_SD4_DAT1__GPIO2_IO09		0x40
 			MX6QDL_PAD_GPIO_1__GPIO1_IO01		0x40
+			MX6QDL_PAD_SD4_DAT1__GPIO2_IO09		0x40
 		>;
 	};
 
@@ -555,19 +930,34 @@
 		>;
 	};
 
-	pinctrl_mic_gnd: gpiomicgnd {
+	pinctrl_lvds_transceiver: lvdstxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x03030 /* SODIMM  95 */
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07   0x0b030 /* SODIMM  55 */
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08   0x03030 /* SODIMM  63 */
+			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x03030 /* SODIMM  99 */
+		>;
+	};
+
+	pinctrl_mic_gnd: micgndgrp {
 		fsl,pins = <
 			/* Controls Mic GND, PU or '1' pull Mic GND to GND */
 			MX6QDL_PAD_RGMII_TD1__GPIO6_IO21 0x1b0b0
 		>;
 	};
 
-	pinctrl_mmc_cd: gpiommccd {
+	pinctrl_mmc_cd: mmccdgrp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_D5__GPIO2_IO05	0x1b0b1
 		>;
 	};
 
+	pinctrl_mmc_cd_sleep: mmccdslpgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D5__GPIO2_IO05	0x0
+		>;
+	};
+
 	pinctrl_pwm1: pwm1grp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_9__PWM1_OUT	0x1b0b1
@@ -576,15 +966,15 @@
 
 	pinctrl_pwm2: pwm2grp {
 		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__PWM2_OUT	0x1b0b1
 			MX6QDL_PAD_EIM_A21__GPIO2_IO17	0x00040
+			MX6QDL_PAD_GPIO_1__PWM2_OUT	0x1b0b1
 		>;
 	};
 
 	pinctrl_pwm3: pwm3grp {
 		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT1__PWM3_OUT	0x1b0b1
 			MX6QDL_PAD_EIM_A22__GPIO2_IO16	0x00040
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT	0x1b0b1
 		>;
 	};
 
@@ -601,10 +991,10 @@
 		>;
 	};
 
-	pinctrl_usbh_oc_1: usbhoc1grp {
+	pinctrl_sgtl5000: sgtl5000grp {
 		fsl,pins = <
-			/* USBH_OC */
-			MX6QDL_PAD_EIM_D30__GPIO3_IO30		0x1b0b0
+			/* SGTL5000 sys_mclk */
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1	0x000b0
 		>;
 	};
 
@@ -650,9 +1040,9 @@
 	pinctrl_uart2_dte: uart2dtegrp {
 		fsl,pins = <
 			MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT6__UART2_RTS_B	0x1b0b1
 			MX6QDL_PAD_SD4_DAT5__UART2_CTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_RTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA	0x1b0b1
 		>;
 	};
 
@@ -667,20 +1057,27 @@
 		fsl,pins = <
 			/* USBC_DET */
 			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
-			/* USBC_DET_EN */
-			MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26	0x0f058
 			/* USBC_DET_OVERWRITE */
 			MX6QDL_PAD_RGMII_RXC__GPIO6_IO30	0x0f058
+			/* USBC_DET_EN */
+			MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26	0x0f058
 		>;
 	};
 
-	pinctrl_usbc_id_1: usbc_id-1 {
+	pinctrl_usbc_id_1: usbcid1grp {
 		fsl,pins = <
 			/* USBC_ID */
 			MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
 		>;
 	};
 
+	pinctrl_usbh_oc_1: usbhoc1grp {
+		fsl,pins = <
+			/* USBH_OC */
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30		0x1b0b0
+		>;
+	};
+
 	pinctrl_usdhc1: usdhc1grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x17071
@@ -692,6 +1089,40 @@
 		>;
 	};
 
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x170b1
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x100b1
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170b1
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170b1
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170b1
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170b1
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x170f1
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x100f1
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f1
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f1
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f1
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f1
+		>;
+	};
+
+	/* avoid backfeeding with removed card power */
+	pinctrl_usdhc1_sleep: usdhc1sleepgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x3000
+			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x3000
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x3000
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x3000
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x3000
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x3000
+		>;
+	};
+
 	pinctrl_usdhc3: usdhc3grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
@@ -730,135 +1161,136 @@
 		>;
 	};
 
-	pinctrl_weim_sram: weimsramgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0b1
-			MX6QDL_PAD_EIM_RW__EIM_RW		0xb0b1
-			/* Data */
-			MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00	0x1b0b0
-			MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT4__EIM_DATA02	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT5__EIM_DATA03	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT6__EIM_DATA04	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT7__EIM_DATA05	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT8__EIM_DATA06	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT9__EIM_DATA07	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT12__EIM_DATA08	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT13__EIM_DATA09	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT14__EIM_DATA10	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT15__EIM_DATA11	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT16__EIM_DATA12	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT17__EIM_DATA13	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT18__EIM_DATA14	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT19__EIM_DATA15	0x1b0b0
-			/* Address */
-			MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0b1
-			MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0b1
-			MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0b1
-			MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0b1
-			MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0b1
-			MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0b1
-			MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0b1
-			MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0b1
-			MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0b1
-			MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0b1
-			MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0b1
-			MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0b1
-			MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0b1
-			MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0b1
-			MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0b1
-			MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0b1
-		>;
-	};
-
-	pinctrl_weim_rdnwr: weimrdnwr {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CLK__GPIO1_IO10		0x0040
-			MX6QDL_PAD_RGMII_TD3__GPIO6_IO23	0x130b0
-		>;
-	};
-
-	pinctrl_weim_npwe: weimnpwe {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12		0x0040
-			MX6QDL_PAD_RGMII_TD2__GPIO6_IO22	0x130b0
-		>;
-	};
-
 	/* ADDRESS[16:18] [25] used as GPIO */
-	pinctrl_weim_gpio_1: weimgpio-1 {
+	pinctrl_weim_gpio_1: weimgpio1grp {
 		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
-			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
-			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
 			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b0
 			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x1b0b0
 			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x1b0b0
 			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b0
 			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x1b0b0
 			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x1b0b0
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
 			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
 		>;
 	};
 
 	/* ADDRESS[19:24] used as GPIO */
-	pinctrl_weim_gpio_2: weimgpio-2 {
+	pinctrl_weim_gpio_2: weimgpio2grp {
 		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
-			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
-			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x1b0b0
 			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b0
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
 			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
 		>;
 	};
 
 	/* DATA[16:31] used as GPIO */
-	pinctrl_weim_gpio_3: weimgpio-3 {
+	pinctrl_weim_gpio_3: weimgpio3grp {
 		fsl,pins = <
+			MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19	0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x1b0b0
 			MX6QDL_PAD_EIM_LBA__GPIO2_IO27		0x1b0b0
 			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0x1b0b0
-			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x1b0b0
-			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x1b0b0
-			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x1b0b0
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b0
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
 			MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x1b0b0
-			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x1b0b0
 			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x1b0b0
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x1b0b0
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x1b0b0
 			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x1b0b0
-			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
-			MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19	0x1b0b0
-			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x1b0b0
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0
-			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b0
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x1b0b0
+			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x1b0b0
 		>;
 	};
 
 	/* DQM[0:3] used as GPIO */
-	pinctrl_weim_gpio_4: weimgpio-4 {
+	pinctrl_weim_gpio_4: weimgpio4grp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1b0b0
 			MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x1b0b0
-			MX6QDL_PAD_SD2_DAT2__GPIO1_IO13		0x1b0b0
 			MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b0
+			MX6QDL_PAD_SD2_DAT2__GPIO1_IO13		0x1b0b0
 		>;
 	};
 
 	/* RDY used as GPIO */
-	pinctrl_weim_gpio_5: weimgpio-5 {
+	pinctrl_weim_gpio_5: weimgpio5grp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x1b0b0
 		>;
 	};
 
 	/* ADDRESS[16] DATA[30] used as GPIO */
-	pinctrl_weim_gpio_6: weimgpio-6 {
+	pinctrl_weim_gpio_6: weimgpio6grp {
 		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
 			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+		>;
+	};
+
+	pinctrl_weim_npwe: weimnpwegrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TD2__GPIO6_IO22	0x130b0
+			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12		0x0040
+		>;
+	};
+
+	pinctrl_weim_sram: weimsramgrp {
+		fsl,pins = <
+			/* Data */
+			MX6QDL_PAD_CSI0_DAT4__EIM_DATA02	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__EIM_DATA03	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__EIM_DATA04	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT7__EIM_DATA05	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT8__EIM_DATA06	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT9__EIM_DATA07	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT12__EIM_DATA08	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__EIM_DATA09	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__EIM_DATA10	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__EIM_DATA11	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__EIM_DATA12	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__EIM_DATA13	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__EIM_DATA14	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__EIM_DATA15	0x1b0b0
+			MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00	0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01	0x1b0b0
+			/* Address */
+			MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0b1
+			MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0b1
+			MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0b1
+			MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0b1
+			MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0b1
+			MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0b1
+			MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0b1
+			MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0b1
+			MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0b1
+			MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0b1
+			MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0b1
+			MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0b1
+			MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0b1
+			MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0b1
+			MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0b1
+			MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0b1
+			/* Ctrl */
+			MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0b1
+			MX6QDL_PAD_EIM_RW__EIM_RW		0xb0b1
+		>;
+	};
+
+	pinctrl_weim_rdnwr: weimrdnwrgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TD3__GPIO6_IO23	0x130b0
+			MX6QDL_PAD_SD2_CLK__GPIO1_IO10		0x0040
 		>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
index 648f5fcb72e6..2c1d6f28e695 100644
--- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
@@ -35,7 +35,7 @@
 	pinctrl-0 = <&pinctrl_ecspi3>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "sst,sst25vf040b", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi b/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi
index dc89b554e694..6248b126b557 100644
--- a/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi
@@ -4,7 +4,10 @@
  * Copyright (C) 2018 Marek Vasut <marex@denx.de>
  */
 
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
 
 / {
 	chosen {
@@ -329,37 +332,4 @@
 			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0xb1 /* Int */
 		>;
 	};
-
-	pinctrl_ipu1_lcdif: ipu1-lcdif-grp {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x38
-			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x38
-			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x38
-			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x38
-			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x38
-			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x38
-			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x38
-			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x38
-			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x38
-			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x38
-			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x38
-			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x38
-			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x38
-			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x38
-			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x38
-			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x38
-			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x38
-			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x38
-			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x38
-			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x38
-			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x38
-			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x38
-			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x38
-			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x38
-			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x38
-			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x38
-			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x38
-			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x38
-		>;
-	};
 };
diff --git a/arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi b/arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi
index 5befbe13d1a3..eaa87b333164 100644
--- a/arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi
@@ -667,6 +667,39 @@
 		>;
 	};
 
+	pinctrl_ipu1_lcdif: ipu1-lcdif-grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x38
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x38
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x38
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x38
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x38
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x38
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x38
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x38
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x38
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x38
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x38
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x38
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x38
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x38
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x38
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x38
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x38
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x38
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x38
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x38
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x38
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x38
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x38
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x38
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x38
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x38
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x38
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x38
+		>;
+	};
+
 	pinctrl_pcie: pcie-grp {
 		fsl,pins = <
 			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x1b0b1 /* Wake */
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index b1df2beb2832..728810b9d677 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -137,6 +137,16 @@
 		regulator-always-on;
 	};
 
+	reg_can1_stby: regulator-can1-stby {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_can1>;
+		regulator-name = "can1_stby";
+		gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	reg_usb_otg_vbus: regulator-usb-otg-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb_otg_vbus";
@@ -170,6 +180,7 @@
 &can1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_stby>;
 	status = "okay";
 };
 
@@ -612,7 +623,6 @@
 		fsl,pins = <
 			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
 			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
-			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x4001b0b0 /* CAN_STBY */
 		>;
 	};
 
@@ -702,6 +712,12 @@
 		>;
 	};
 
+	pinctrl_reg_can1: regcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x4001b0b0 /* CAN_STBY */
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index a0710d562766..6c0c109046d8 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -129,6 +129,16 @@
 		regulator-always-on;
 	};
 
+	reg_can1_stby: regulator-can1-stby {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_can1>;
+		regulator-name = "can1_stby";
+		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	reg_usb_h1_vbus: regulator-usb-h1-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb_h1_vbus";
@@ -170,6 +180,7 @@
 &can1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_stby>;
 	status = "okay";
 };
 
@@ -600,7 +611,6 @@
 		fsl,pins = <
 			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
 			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0 /* CAN_STBY */
 		>;
 	};
 
@@ -691,6 +701,12 @@
 		>;
 	};
 
+	pinctrl_reg_can1: regcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0 /* CAN_STBY */
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index cda48bf2f168..a9b04f9f1c2b 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -137,6 +137,16 @@
 			regulator-always-on;
 		};
 
+		reg_can1_stby: regulator-can1-stby {
+			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_reg_can1>;
+			regulator-name = "can1_stby";
+			gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
 		reg_usb_h1_vbus: regulator@2 {
 			compatible = "regulator-fixed";
 			reg = <2>;
@@ -200,6 +210,7 @@
 &can1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_stby>;
 	status = "okay";
 };
 
@@ -687,7 +698,6 @@
 		fsl,pins = <
 			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
 			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0 /* CAN_STBY */
 		>;
 	};
 
@@ -786,6 +796,12 @@
 		>;
 	};
 
+	pinctrl_reg_can1: regcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0 /* CAN_STBY */
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
index 68e5ab2e27e2..6bb4855d13ce 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
@@ -29,7 +29,7 @@
 
 		user-pb {
 			label = "user_pb";
-			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
diff --git a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
index 8e23cec7149e..696427b487f0 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
@@ -26,7 +26,7 @@
 
 		user-pb {
 			label = "user_pb";
-			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
diff --git a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
index b167b33bd108..85aeebc9485d 100644
--- a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
@@ -51,16 +51,6 @@
 		vin-supply = <&reg_3p3v_s5>;
 	};
 
-	reg_3p3v_s0: regulator-3p3v-s0 {
-		compatible = "regulator-fixed";
-		regulator-name = "V_3V3_S0";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&reg_3p3v_s5>;
-	};
-
 	reg_3p3v_s5: regulator-3p3v-s5 {
 		compatible = "regulator-fixed";
 		regulator-name = "V_3V3_S5";
@@ -258,8 +248,8 @@
 	status = "okay";
 
 	/* default boot source: workaround #1 for errata ERR006282 */
-	smarc_flash: spi-flash@0 {
-		compatible = "winbond,w25q16dw", "jedec,spi-nor";
+	smarc_flash: flash@0 {
+		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <20000000>;
 	};
@@ -270,7 +260,23 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	phy-handle = <&ethphy>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <1000>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
 };
 
 &i2c_intern {
@@ -397,7 +403,7 @@
 
 /* HDMI_CTRL */
 &i2c2 {
-	clock-frequency = <375000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 };
diff --git a/arch/arm/boot/dts/imx6qdl-mba6.dtsi b/arch/arm/boot/dts/imx6qdl-mba6.dtsi
index daf76345b179..78555a618851 100644
--- a/arch/arm/boot/dts/imx6qdl-mba6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-mba6.dtsi
@@ -17,6 +17,7 @@
 		mmc1 = &usdhc2;
 		/delete-property/ mmc2;
 		/delete-property/ mmc3;
+		rtc0 = &rtc0;
 	};
 
 	chosen {
@@ -39,18 +40,21 @@
 			label = "s6";
 			linux,code = <KEY_F6>;
 			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 
 		button2 {
 			label = "s7";
 			linux,code = <KEY_F7>;
 			gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 
 		button3 {
 			label = "s8";
 			linux,code = <KEY_F8>;
 			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 	};
 
@@ -82,6 +86,8 @@
 
 	reg_pcie: regulator-pcie {
 		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regpcie>;
 		regulator-name = "supply-pcie";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
@@ -238,7 +244,6 @@
 	status = "okay";
 };
 
-
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
@@ -392,7 +397,6 @@
 
 	pinctrl_hog: hoggrp {
 		fsl,pins = <
-			/* LCD.CONTRAST -> Rev 0100 only, not used on Rev.0200*/
 			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x0001b099
 
 			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x0001b099
@@ -433,8 +437,6 @@
 			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x001b0f0 /* #PCIE.WAKE */
 			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x001b0f0 /* #PCIE.RST */
 			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x001b0f0 /* #PCIE.DIS */
-			/* HYS = 1, DSE = 110, PUE+PKE, SPEED = HIGH (11)*/
-			MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x00130f0 /* PCIE.PWR_EN */
 		>;
 	};
 
@@ -459,6 +461,13 @@
 		>;
 	};
 
+	pinctrl_regpcie: regpciegrp {
+		fsl,pins = <
+			/* HYS = 1, DSE = 110, PUE+PKE, SPEED = HIGH (11)*/
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x00130f0 /* PCIE.PWR_EN */
+		>;
+	};
+
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b099
diff --git a/arch/arm/boot/dts/imx6qdl-mba6a.dtsi b/arch/arm/boot/dts/imx6qdl-mba6a.dtsi
index a61f2705a340..df8fa169e9f6 100644
--- a/arch/arm/boot/dts/imx6qdl-mba6a.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-mba6a.dtsi
@@ -6,12 +6,6 @@
  * Author: Markus Niebel <Markus.Niebel@tq-group.com>
  */
 
-/ {
-	aliases {
-		rtc0 = &rtc0;
-	};
-};
-
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>, <&pinctrl_enet_fix>;
diff --git a/arch/arm/boot/dts/imx6qdl-mba6b.dtsi b/arch/arm/boot/dts/imx6qdl-mba6b.dtsi
index 9f9f7037c9e4..7d1cd7454c7f 100644
--- a/arch/arm/boot/dts/imx6qdl-mba6b.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-mba6b.dtsi
@@ -6,12 +6,6 @@
  * Author: Markus Niebel <Markus.Niebel@tq-group.com>
  */
 
-/ {
-	aliases {
-		rtc0 = &rtc0;
-	};
-};
-
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
@@ -19,8 +13,11 @@
 
 &i2c1 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_recovery>;
+	scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
index ac34709e9741..a53a5d0766a5 100644
--- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
@@ -179,7 +179,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "microchip,sst25vf016b";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
@@ -192,6 +192,7 @@
 	phy-mode = "rgmii";
 	phy-handle = <&ethphy>;
 	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
index c96f4d7e1e0d..57c21a01f126 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
@@ -321,7 +321,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "microchip,sst25vf016b";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
@@ -334,6 +334,7 @@
 	phy-mode = "rgmii";
 	phy-handle = <&ethphy>;
 	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
index 92d09a3ebe0e..000e9dc97b1a 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
@@ -252,7 +252,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "microchip,sst25vf016b";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
@@ -263,6 +263,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index 49da30d7510c..731759bdd7f5 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -237,7 +237,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "sst,sst25vf016b", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
@@ -267,6 +267,7 @@
 	phy-mode = "rgmii";
 	phy-handle = <&ethphy>;
 	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-av-02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-av-02.dtsi
index 393475cb0f4d..0020dbb1722c 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-av-02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-av-02.dtsi
@@ -64,7 +64,7 @@
 		interrupt-parent = <&gpio3>;
 		interrupts = <2 IRQ_TYPE_NONE>;
 		status = "disabled";
-        };
+	};
 };
 
 &ipu1_di0_disp0 {
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index f3236204cb5a..768bc0e3a2b3 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -47,12 +47,12 @@
 		pinctrl-0 = <&pinctrl_leds>;
 		compatible = "gpio-leds";
 
-		green {
+		led_green: green {
 			label = "phyflex:green";
 			gpios = <&gpio1 30 0>;
 		};
 
-		red {
+		led_red: red {
 			label = "phyflex:red";
 			gpios = <&gpio2 31 0>;
 		};
@@ -205,6 +205,19 @@
 				regulator-always-on;
 			};
 		};
+
+		da9063_rtc: rtc {
+			compatible = "dlg,da9063-rtc";
+		};
+
+		da9063_wdog: watchdog {
+			compatible = "dlg,da9063-watchdog";
+		};
+
+		onkey {
+			compatible = "dlg,da9063-onkey";
+			status = "disabled";
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
index 94b254bfd054..28a805384668 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
@@ -116,6 +116,16 @@
 			dlg,use-sw-pm;
 		};
 
+		thermal {
+			compatible = "dlg,da9062-thermal";
+			status = "disabled";
+		};
+
+		gpio {
+			compatible = "dlg,da9062-gpio";
+			status = "disabled";
+		};
+
 		regulators {
 			vdd_arm: buck1 {
 				regulator-name = "vdd_arm";
diff --git a/arch/arm/boot/dts/imx6qdl-prti6q.dtsi b/arch/arm/boot/dts/imx6qdl-prti6q.dtsi
index 19578f660b09..f0db0d4471f4 100644
--- a/arch/arm/boot/dts/imx6qdl-prti6q.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-prti6q.dtsi
@@ -94,6 +94,9 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	bus-width = <8>;
 	non-removable;
+	no-1-8-v;
+	no-sd;
+	no-sdio;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 5e58740d40c5..3dbb460ef102 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -272,7 +272,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
 	status = "disabled"; /* pin conflict with WEIM NOR */
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "st,m25p32", "jedec,spi-nor";
@@ -295,6 +295,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii-id";
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index eb9a0b104f1c..22f8e2783cdf 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -1,43 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright 2011 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/clock/imx6qdl-clock.h>
@@ -313,7 +278,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "sst,sst25vf016b", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 0c0105468a2f..37482a9023fc 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -197,7 +197,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "st,m25p32", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi b/arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi
index 69ae430a53bd..b81799d7076a 100644
--- a/arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi
@@ -2,35 +2,60 @@
 //
 // Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
 
+/ {
+	touchscreen {
+		compatible = "resistive-adc-touch";
+		io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>, <&adc_ts 5>;
+		io-channel-names = "y", "z1", "z2", "x";
+		touchscreen-min-pressure = <65000>;
+		touchscreen-inverted-y;
+		touchscreen-swapped-x-y;
+		touchscreen-x-plate-ohms = <300>;
+		touchscreen-y-plate-ohms = <800>;
+	};
+};
+
 &ecspi4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi4>;
 	cs-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
-	touchscreen@0 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_touch>;
-		compatible = "ti,tsc2046";
+	adc_ts: adc@0 {
+		compatible = "ti,tsc2046e-adc";
 		reg = <0>;
+		pinctrl-0 = <&pinctrl_touch>;
+		pinctrl-names ="default";
 		spi-max-frequency = <1000000>;
 		interrupts-extended = <&gpio3 19 IRQ_TYPE_LEVEL_LOW>;
-		vcc-supply  = <&reg_3v3>;
-		pendown-gpio = <&gpio3 19 GPIO_ACTIVE_LOW>;
-		ti,x-plate-ohms = /bits/ 16 <850>;
-		ti,y-plate-ohms = /bits/ 16 <295>;
-		ti,pressure-min = /bits/ 16 <2>;
-		ti,pressure-max = /bits/ 16 <1500>;
-		ti,vref-mv	= /bits/ 16 <3300>;
-		ti,settle-delay-usec = /bits/ 16 <15>;
-		ti,vref-delay-usecs = /bits/ 16 <0>;
-		ti,penirq-recheck-delay-usecs = /bits/ 16 <100>;
-		ti,debounce-max = /bits/ 16 <100>;
-		ti,debounce-tol = /bits/ 16 <(~0)>;
-		ti,debounce-rep = /bits/ 16 <4>;
-		touchscreen-swapped-x-y;
-		touchscreen-inverted-y;
-		wakeup-source;
+		#io-channel-cells = <1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@1 {
+			reg = <1>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@3 {
+			reg = <3>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@4 {
+			reg = <4>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi b/arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi
index 77a91a97e6cf..3def1b621c8e 100644
--- a/arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi
@@ -149,6 +149,16 @@
 		gpio = <&gpio4 11 GPIO_ACTIVE_LOW>;
 	};
 
+	reg_tft_vcom: regulator-tft-vcom {
+		compatible = "pwm-regulator";
+		pwms = <&pwm3 0 20000 0>;
+		regulator-name = "tft_vcom";
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+		regulator-always-on;
+		voltage-table = <3600000 26>;
+	};
+
 	reg_vcc_mmc: regulator-vcc-mmc {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
index f86efd0ccc40..ce543e325cd3 100644
--- a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
@@ -83,6 +83,16 @@
 			qca,clk-out-frequency = <125000000>;
 			qca,smarteee-tw-us-1g = <24>;
 		};
+
+		/*
+		 * ADIN1300 (som rev 1.9 or later) is always at address 1. It
+		 * will be enabled automatically by U-Boot if detected.
+		 */
+		ethernet-phy@1 {
+			reg = <1>;
+			adi,phy-output-clock = "125mhz-free-running";
+			status = "disabled";
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-tqma6.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6.dtsi
index 51a3a5392c95..344ea935c7da 100644
--- a/arch/arm/boot/dts/imx6qdl-tqma6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tqma6.dtsi
@@ -52,6 +52,13 @@
 		>;
 	};
 
+	pinctrl_i2c1_recovery: i2c1recoverygrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x4001b899
+			MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x4001b899
+		>;
+	};
+
 	pinctrl_i2c3: i2c3grp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b899
@@ -59,6 +66,13 @@
 		>;
 	};
 
+	pinctrl_i2c3_recovery: i2c3recoverygrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x4001b899
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b899
+		>;
+	};
+
 	pinctrl_pmic: pmicgrp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b099 /* PMIC irq */
diff --git a/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi
index bfb67da64b96..aff46f3040c1 100644
--- a/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi
@@ -4,15 +4,21 @@
  * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
  */
 
+#include <dt-bindings/gpio/gpio.h>
+
 &fec {
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
 };
 
 &i2c1 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_recovery>;
+	scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	clock-frequency = <100000>;
 	status = "okay";
 
@@ -30,6 +36,7 @@
 		compatible = "st,24c64", "atmel,24c64";
 		reg = <0x50>;
 		pagesize = <32>;
+		vcc-supply = <&reg_3p3v>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi
index 49c472285c06..a3f6543c3aaa 100644
--- a/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi
@@ -4,9 +4,14 @@
  * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
  */
 
+#include <dt-bindings/gpio/gpio.h>
+
 &i2c3 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_recovery>;
+	scl-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	clock-frequency = <100000>;
 	status = "okay";
 
@@ -24,5 +29,6 @@
 		compatible = "st,24c64", "atmel,24c64";
 		reg = <0x50>;
 		pagesize = <32>;
+		vcc-supply = <&reg_3p3v>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx6qdl-ts7970.dtsi b/arch/arm/boot/dts/imx6qdl-ts7970.dtsi
index fded07f370b3..c096d25a6f5b 100644
--- a/arch/arm/boot/dts/imx6qdl-ts7970.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-ts7970.dtsi
@@ -192,6 +192,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
@@ -226,7 +227,7 @@
 		reg = <0x28>;
 		#gpio-cells = <2>;
 		gpio-controller;
-		ngpio = <32>;
+		ngpios = <62>;
 	};
 
 	sgtl5000: codec@a {
diff --git a/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi b/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi
index 410972e1dca9..99ec7a838f8d 100644
--- a/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi
@@ -85,7 +85,7 @@
 };
 
 &i2c3 {
-	rtc: mcp7940x@6f {
+	rtc: rtc@6f {
 		compatible = "microchip,mcp7940x";
 		reg = <0x6f>;
 	};
diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
index bcc5bbcce769..f41f86a76ea9 100644
--- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
@@ -264,11 +264,6 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet &pinctrl_enet_mdio &pinctrl_etnphy_rst>;
-	clocks = <&clks IMX6QDL_CLK_ENET>,
-		 <&clks IMX6QDL_CLK_ENET>,
-		 <&clks IMX6QDL_CLK_ENET_REF>,
-		 <&clks IMX6QDL_CLK_ENET_REF>;
-	clock-names = "ipg", "ahb", "ptp", "enet_out";
 	phy-mode = "rmii";
 	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
 	phy-reset-post-delay = <10>;
diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
index d07d8f83456d..93a8123da27d 100644
--- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
@@ -5,6 +5,8 @@
  * Author: Fabio Estevam <fabio.estevam@freescale.com>
  */
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	aliases {
 		backlight = &backlight;
@@ -226,6 +228,7 @@
 				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
 				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
 				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
 			>;
 		};
 
@@ -292,7 +295,7 @@
 	pinctrl-0 = <&pinctrl_usbh>;
 	vbus-supply = <&reg_usb_h1_vbus>;
 	clocks = <&clks IMX6QDL_CLK_CKO>;
-	status = "okay";
+	status = "disabled";
 };
 
 &usbotg {
@@ -304,7 +307,7 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	non-removable;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-vicut1-12inch.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1-12inch.dtsi
new file mode 100644
index 000000000000..f505f2704530
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-vicut1-12inch.dtsi
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2021 Protonic Holland
+ */
+
+/ {
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys>;
+		autorepeat;
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	panel {
+		compatible = "kyo,tcg121xglp";
+		backlight = <&backlight_lcd>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&rgmii_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Microchip KSZ9031RNX PHY */
+		rgmii_phy: ethernet-phy@0 {
+			reg = <0>;
+			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR",
+			"CAM2_MIRROR", "", "", "SMBALERT",
+		"DEBUG_0", "DEBUG_1", "", "", "", "", "", "",
+		"SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK",
+			"SD1_DATA3", "ETH_MDIO", "",
+		"", "ETH_RESET", "", "", "ETH_INT", "", "", "ETH_MDC";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "", "UART4_TXD", "UART4_RXD",
+		"UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR",
+			"CAN2_SR", "CAN2_TX", "CAN2_RX",
+		"", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL",
+			"HITCH_IN_OUT",
+		"LIGHT_ON", "", "", "CONTACT_IN", "BL_EN", "BL_PWM", "",
+			"ISB_LED";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET",
+			"I2S_BITCLK", "I2S_DOUT",
+		"I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX",
+			"YACO_AUX_TX", "ITU656_D0", "ITU656_D1";
+};
+
+&gpio6 {
+	gpio-line-names =
+		"ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5",
+			"ITU656_D6", "ITU656_D7", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "RGMII_TXC", "RGMII_TD0", "RGMII_TD1", "RGMII_TD2",
+			"RGMII_TD3",
+		"RGMII_RX_CTL", "RGMII_RD0", "RGMII_TX_CTL", "RGMII_RD1",
+			"RGMII_RD2", "RGMII_RD3", "", "";
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC			0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0			0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1			0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2			0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3			0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL		0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC			0x10030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0			0x10030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1			0x10030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2			0x10030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3			0x10030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL		0x10030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK		0x10030
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x10030
+			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x10030
+			/* Phy reset */
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25		0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28		0x1b0b1
+		>;
+	};
+
+	pinctrl_gpiokeys: gpiokeygrp {
+		fsl,pins = <
+			/* nON_SWITCH */
+			MX6QDL_PAD_EIM_CS0__GPIO2_IO23			0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
index b9e305774fed..c4e6cf0527ba 100644
--- a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
@@ -16,18 +16,37 @@
 		stdout-path = &uart4;
 	};
 
-	backlight: backlight {
+	backlight_lcd: backlight {
 		compatible = "pwm-backlight";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_backlight>;
 		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 16 64 255>;
 		num-interpolated-steps = <16>;
-		default-brightness-level = <1>;
+		default-brightness-level = <48>;
 		power-supply = <&reg_3v3>;
 		enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
 	};
 
+	backlight_led: backlight-led {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 5000000 0>;
+		brightness-levels = <0 16 64 255>;
+		num-interpolated-steps = <16>;
+		default-brightness-level = <48>;
+		power-supply = <&reg_3v3>;
+	};
+
+	/* only for backwards compatibility with old HW */
+	backlight_isb: backlight-isb {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 5000000 0>;
+		brightness-levels = <0 8 48 255>;
+		num-interpolated-steps = <5>;
+		default-brightness-level = <0>;
+		power-supply = <&reg_3v3>;
+	};
+
 	connector {
 		compatible = "composite-video-connector";
 		label = "Composite0";
@@ -61,54 +80,37 @@
 		gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
 	};
 
-	gpio-keys {
-		compatible = "gpio-keys";
-		autorepeat;
-
-		power {
-			label = "Power Button";
-			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-	};
-
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_leds>;
 
 		led-0 {
-			label = "LED_DI0_DEBUG_0";
+			label = "debug0";
 			function = LED_FUNCTION_HEARTBEAT;
-			gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
 		led-1 {
-			label = "LED_DI0_DEBUG_1";
+			label = "debug1";
 			function = LED_FUNCTION_DISK;
-			gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>;
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "disk-activity";
 		};
 
 		led-2 {
-			label = "POWER_LED";
+			label = "power_led";
 			function = LED_FUNCTION_POWER;
 			gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
-	};
-
-	panel {
-		compatible = "kyo,tcg121xglp";
-		backlight = <&backlight>;
-		power-supply = <&reg_3v3>;
 
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
+		led-3 {
+			label = "isb_led";
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
 		};
 	};
 
@@ -126,15 +128,6 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
-	reg_h1_vbus: regulator-h1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "h1-vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
 	reg_otg_vbus: regulator-otg-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "otg-vbus";
@@ -144,18 +137,6 @@
 		enable-active-high;
 	};
 
-	reg_wifi: regulator-wifi {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_wifi_npd>;
-		regulator-name = "wifi";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		startup-delay-us = <70000>;
-	};
-
 	sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "prti6q-sgtl5000";
@@ -182,6 +163,14 @@
 			frame-master;
 		};
 	};
+
+	thermal-zones {
+		chassis-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&tsens0>;
+		};
+	};
 };
 
 &audmux {
@@ -212,6 +201,8 @@
 &can1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_can1>;
+	termination-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	termination-ohms = <150>;
 	status = "okay";
 };
 
@@ -239,47 +230,13 @@
 	};
 };
 
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&rgmii_phy>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* Microchip KSZ9031RNX PHY */
-		rgmii_phy: ethernet-phy@0 {
-			reg = <0>;
-			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
-			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <10000>;
-			reset-deassert-us = <300>;
-		};
-	};
-};
-
-&gpio1 {
-	gpio-line-names =
-		"CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR",
-			"CAM2_MIRROR", "", "", "SMBALERT",
-		"DEBUG_0", "DEBUG_1", "SDIO_SCK", "SDIO_CMD", "SDIO_D3",
-			"SDIO_D2", "SDIO_D1", "SDIO_D0",
-		"SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK",
-			"SD1_DATA3", "", "",
-		"", "ETH_RESET", "WIFI_PD", "WIFI_BT_RST", "ETH_INT", "",
-			"WL_IRQ", "ETH_MDC";
-};
-
 &gpio2 {
 	gpio-line-names =
-		"count0", "count1", "count2", "", "", "", "", "",
-		"REV_ID0", "REV_ID1", "REV_ID2", "REV_ID3", "REV_ID4",
-			"BOARD_ID0", "BOARD_ID1", "BOARD_ID2",
-		"", "", "", "", "", "", "", "ON_SWITCH",
-		"POWER_LED", "", "ECSPI2_SS0", "", "", "", "", "";
+		"YACO_WHEEL", "YACO_RADAR", "YACO_PTO", "", "", "", "", "",
+		"", "LED_PWM", "", "", "",
+			"", "", "",
+		"", "", "", "", "", "ISB_IN2", "ISB_nIN1", "ON_SWITCH",
+		"POWER_LED", "", "", "", "", "", "", "";
 };
 
 &gpio3 {
@@ -288,37 +245,8 @@
 		"", "", "", "", "", "", "", "",
 		"ECSPI1_SCLK", "ECSPI1_MISO", "ECSPI1_MOSI", "ECSPI1_SS1",
 			"CPU_ON1_FB", "USB_OTG_OC", "USB_OTG_PWR", "YACO_IRQ",
-		"", "", "", "", "", "", "", "";
-};
-
-&gpio4 {
-	gpio-line-names =
-		"", "", "", "", "", "", "UART4_TXD", "UART4_RXD",
-		"UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR",
-			"CAN2_SR", "CAN2_TX", "CAN2_RX",
-		"LED_DI0_DEBUG_0", "LED_DI0_DEBUG_1", "", "", "", "", "", "",
-		"", "", "", "", "BL_EN", "BL_PWM", "", "";
-};
-
-&gpio5 {
-	gpio-line-names =
-		"", "", "", "", "", "PCIE_WAKE", "PCIE_CLKREQ", "PCIE_W_DIS",
-		"PCIE_RESET", "", "", "", "", "", "", "",
-		"", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET",
-			"I2S_BITCLK", "I2S_DOUT",
-		"I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX",
-			"YACO_AUX_TX", "ITU656_D0", "ITU656_D1";
-};
-
-&gpio6 {
-	gpio-line-names =
-		"ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5",
-			"ITU656_D6", "ITU656_D7", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "RGMII_TXC", "RGMII_TD0", "RGMII_TD1", "RGMII_TD2",
-			"RGMII_TD3",
-		"RGMII_RX_CTL", "RGMII_RD0", "RGMII_TX_CTL", "RGMII_RD1",
-			"RGMII_RD2", "RGMII_RD3", "", "";
+		"TSS_TXD", "TSS_RXD", "", "", "", "", "YACO_BOOT0",
+			"YACO_RESET";
 };
 
 &gpio7 {
@@ -413,9 +341,10 @@
 		reg = <0x51>;
 	};
 
-	temperature-sensor@70 {
+	tsens0: temperature-sensor@70 {
 		compatible = "ti,tmp103";
 		reg = <0x70>;
+		#thermal-sensor-cells = <0>;
 	};
 };
 
@@ -445,13 +374,21 @@
 	};
 };
 
-&pcie {
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
 };
 
-&pwm1 {
+&pwm2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
 };
 
@@ -467,12 +404,6 @@
 	status = "okay";
 };
 
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
@@ -492,7 +423,6 @@
 };
 
 &usbh1 {
-	vbus-supply = <&reg_h1_vbus>;
 	pinctrl-names = "default";
 	phy_type = "utmi";
 	dr_mode = "host";
@@ -521,26 +451,6 @@
 	status = "okay";
 };
 
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	vmmc-supply = <&reg_wifi>;
-	non-removable;
-	cap-power-off-card;
-	keep-power-in-suspend;
-	no-1-8-v;
-	no-mmc;
-	no-sd;
-	status = "okay";
-
-	wifi {
-		compatible = "ti,wl1271";
-		interrupts-extended = <&gpio1 30 IRQ_TYPE_LEVEL_HIGH>;
-		ref-clock-frequency = "38400000";
-		tcxo-clock-frequency = "19200000";
-	};
-};
-
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
@@ -621,29 +531,6 @@
 		>;
 	};
 
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC			0x1b030
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0			0x1b030
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1			0x1b030
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2			0x1b030
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3			0x1b030
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL		0x1b030
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC			0x10030
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0			0x10030
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1			0x10030
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2			0x10030
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3			0x10030
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL		0x10030
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK		0x10030
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x10030
-			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x10030
-			/* Phy reset */
-			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25		0x1b0b0
-			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28		0x1b0b1
-		>;
-	};
-
 	pinctrl_hog: hoggrp {
 		fsl,pins = <
 			/* ITU656_nRESET */
@@ -654,8 +541,6 @@
 			MX6QDL_PAD_GPIO_4__GPIO1_IO04			0x130b0
 			/* CAM_nDETECT */
 			MX6QDL_PAD_GPIO_17__GPIO7_IO12			0x1b0b0
-			/* nON_SWITCH */
-			MX6QDL_PAD_EIM_CS0__GPIO2_IO23			0x1b0b0
 			/* ISB_IN1 */
 			MX6QDL_PAD_EIM_A16__GPIO2_IO22			0x130b0
 			/* ISB_nIN2 */
@@ -677,27 +562,11 @@
 			/* ITU656_nPDN */
 			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20		0x1b0b0
 
-			/* HW revision detect */
-			/* REV_ID0 */
-			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08			0x1b0b0
-			/* REV_ID1 */
-			MX6QDL_PAD_SD4_DAT1__GPIO2_IO09			0x1b0b0
-			/* REV_ID2 */
-			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10			0x1b0b0
-			/* REV_ID3 */
-			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11			0x1b0b0
-			/* REV_ID4 */
-			MX6QDL_PAD_SD4_DAT4__GPIO2_IO12			0x1b0b0
-
 			/* New in HW revision 1 */
 			/* ON1_FB */
 			MX6QDL_PAD_EIM_D20__GPIO3_IO20			0x100b0
 			/* DIP1_FB */
 			MX6QDL_PAD_DI0_PIN2__GPIO4_IO18			0x1b0b0
-
-			/* New in UT2: FIXME: ISB PWM should start off, PD */
-			/* ISB_LED_PWM */
-			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30		0x130b0
 		>;
 	};
 
@@ -737,6 +606,8 @@
 			MX6QDL_PAD_DI0_PIN15__GPIO4_IO17		0x1b0b0
 			/* POWER_LED */
 			MX6QDL_PAD_EIM_CS1__GPIO2_IO24			0x1b0b0
+			/* ISB_LED */
+			MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31		0x1b0b0
 		>;
 	};
 
@@ -746,20 +617,23 @@
 		>;
 	};
 
-	/* YaCO AUX Uart */
-	pinctrl_uart1: uart1grp {
+	pinctrl_pwm2: pwm2grp {
 		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA		0x1b0b1
-			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA		0x1b0b1
+			MX6QDL_PAD_DISP0_DAT9__PWM2_OUT			0x1b0b0
 		>;
 	};
 
-	pinctrl_uart2: uart2grp {
+	pinctrl_pwm3: pwm3grp {
 		fsl,pins = <
-			MX6QDL_PAD_EIM_D26__UART2_RX_DATA		0x1b0b1
-			MX6QDL_PAD_EIM_D27__UART2_TX_DATA		0x1b0b1
-			MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B		0x1b0b1
-			MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B		0x1b0b1
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT			0x1b0b0
+		>;
+	};
+
+	/* YaCO AUX Uart */
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA		0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA		0x1b0b1
 		>;
 	};
 
@@ -805,19 +679,6 @@
 		>;
 	};
 
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CMD__SD2_CMD			0x170b9
-			MX6QDL_PAD_SD2_CLK__SD2_CLK			0x100b9
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0			0x170b9
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1			0x170b9
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2			0x170b9
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3			0x170b9
-			/* WL12xx IRQ */
-			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30		0x10880
-		>;
-	};
-
 	pinctrl_usdhc3: usdhc3grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD			0x17099
@@ -833,10 +694,4 @@
 			MX6QDL_PAD_SD3_RST__SD3_RESET			0x1b0b1
 		>;
 	};
-
-	pinctrl_wifi_npd: wifinpdgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26		0x1b8b0
-		>;
-	};
 };
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index d27beb47f9a3..ff1e0173b39b 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -143,7 +143,7 @@
 		#phy-cells = <0>;
 	};
 
-	soc {
+	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
@@ -290,7 +290,7 @@
 			status = "disabled";
 		};
 
-		bus@2000000 { /* AIPS1 */
+		aips1: bus@2000000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -762,7 +762,7 @@
 					regulator-name = "vddpu";
 					regulator-min-microvolt = <725000>;
 					regulator-max-microvolt = <1450000>;
-					regulator-enable-ramp-delay = <150>;
+					regulator-enable-ramp-delay = <380>;
 					anatop-reg-offset = <0x140>;
 					anatop-vol-bit-shift = <9>;
 					anatop-vol-bit-width = <5>;
@@ -929,7 +929,7 @@
 				interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			sdma: sdma@20ec000 {
+			sdma: dma-controller@20ec000 {
 				compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
 				reg = <0x020ec000 0x4000>;
 				interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
@@ -941,7 +941,7 @@
 			};
 		};
 
-		bus@2100000 { /* AIPS2 */
+		aips2: bus@2100000 { /* AIPS2 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm/boot/dts/imx6qp-sabresd.dts b/arch/arm/boot/dts/imx6qp-sabresd.dts
index 480e73183f6b..f69eec18d865 100644
--- a/arch/arm/boot/dts/imx6qp-sabresd.dts
+++ b/arch/arm/boot/dts/imx6qp-sabresd.dts
@@ -50,8 +50,12 @@
 	};
 };
 
+&vgen3_reg {
+	regulator-always-on;
+};
+
 &pcie {
-	status = "disabled";
+	status = "okay";
 };
 
 &sata {
diff --git a/arch/arm/boot/dts/imx6qp-vicutp.dts b/arch/arm/boot/dts/imx6qp-vicutp.dts
index 7bad7ca6b12e..49ff145fffe5 100644
--- a/arch/arm/boot/dts/imx6qp-vicutp.dts
+++ b/arch/arm/boot/dts/imx6qp-vicutp.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 #include "imx6qp.dtsi"
 #include "imx6qdl-vicut1.dtsi"
+#include "imx6qdl-vicut1-12inch.dtsi"
 
 / {
 	model = "Kverneland UT1P Board";
diff --git a/arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts b/arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts
index cea165f2161a..afaf4a6759d4 100644
--- a/arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts
+++ b/arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts
@@ -33,6 +33,10 @@
 	status = "okay";
 };
 
+&reg_pu {
+	regulator-always-on;
+};
+
 &reg_usb_h1_vbus {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qp.dtsi b/arch/arm/boot/dts/imx6qp.dtsi
index 050365513836..fc164991d2ae 100644
--- a/arch/arm/boot/dts/imx6qp.dtsi
+++ b/arch/arm/boot/dts/imx6qp.dtsi
@@ -9,12 +9,18 @@
 		ocram2: sram@940000 {
 			compatible = "mmio-sram";
 			reg = <0x00940000 0x20000>;
+			ranges = <0 0x00940000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
 		ocram3: sram@960000 {
 			compatible = "mmio-sram";
 			reg = <0x00960000 0x20000>;
+			ranges = <0 0x00960000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
index 25f6f2fb1555..f16c830f1e91 100644
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -137,7 +137,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "st,m25p32", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
index a17b8bbbdb95..663ee9df79e6 100644
--- a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
+++ b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
@@ -27,7 +27,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
-		cover {
+		key-cover {
 			label = "Cover";
 			gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
 			linux,code = <SW_LID>;
@@ -35,19 +35,19 @@
 			wakeup-source;
 		};
 
-		fl {
+		key-fl {
 			label = "Frontlight";
 			gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_BRIGHTNESS_CYCLE>;
 		};
 
-		home {
+		key-home {
 			label = "Home";
 			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
 		};
 
-		power {
+		key-power {
 			label = "Power";
 			gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
@@ -60,7 +60,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_led>;
 
-		on {
+		led-0 {
 			label = "tolinoshine2hd:white:on";
 			gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "timer";
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index c7d907c5c352..28111efb19a6 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -50,7 +50,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			compatible = "arm,cortex-a9";
 			device_type = "cpu";
 			reg = <0x0>;
@@ -61,10 +61,10 @@
 				<792000  1175000>,
 				<396000  975000>;
 			fsl,soc-operating-points =
-				/* ARM kHz      SOC-PU uV */
-				<996000         1225000>,
-				<792000         1175000>,
-				<396000         1175000>;
+				/* ARM kHz	SOC-PU uV */
+				<996000		1225000>,
+				<792000		1175000>,
+				<396000		1175000>;
 			clock-latency = <61036>; /* two CLK32 periods */
 			#cooling-cells = <2>;
 			clocks = <&clks IMX6SL_CLK_ARM>, <&clks IMX6SL_CLK_PLL2_PFD2>,
@@ -115,6 +115,9 @@
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6SL_CLK_OCRAM>;
 		};
 
@@ -222,7 +225,7 @@
 
 				uart5: serial@2018000 {
 					compatible = "fsl,imx6sl-uart",
-						   "fsl,imx6q-uart", "fsl,imx21-uart";
+						     "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02018000 0x4000>;
 					interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SL_CLK_UART>,
@@ -235,7 +238,7 @@
 
 				uart1: serial@2020000 {
 					compatible = "fsl,imx6sl-uart",
-						   "fsl,imx6q-uart", "fsl,imx21-uart";
+						     "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02020000 0x4000>;
 					interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SL_CLK_UART>,
@@ -248,7 +251,7 @@
 
 				uart2: serial@2024000 {
 					compatible = "fsl,imx6sl-uart",
-						   "fsl,imx6q-uart", "fsl,imx21-uart";
+						     "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02024000 0x4000>;
 					interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SL_CLK_UART>,
@@ -309,7 +312,7 @@
 
 				uart3: serial@2034000 {
 					compatible = "fsl,imx6sl-uart",
-						   "fsl,imx6q-uart", "fsl,imx21-uart";
+						     "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02034000 0x4000>;
 					interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SL_CLK_UART>,
@@ -322,7 +325,7 @@
 
 				uart4: serial@2038000 {
 					compatible = "fsl,imx6sl-uart",
-						   "fsl,imx6q-uart", "fsl,imx21-uart";
+						     "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02038000 0x4000>;
 					interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SL_CLK_UART>,
@@ -711,7 +714,7 @@
 						#power-domain-cells = <0>;
 						power-supply = <&reg_pu>;
 						clocks = <&clks IMX6SL_CLK_GPU2D_OVG>,
-						         <&clks IMX6SL_CLK_GPU2D_PODF>;
+							 <&clks IMX6SL_CLK_GPU2D_PODF>;
 					};
 
 					pd_disp: power-domain@2 {
@@ -747,7 +750,7 @@
 				interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			sdma: sdma@20ec000 {
+			sdma: dma-controller@20ec000 {
 				compatible = "fsl,imx6sl-sdma", "fsl,imx6q-sdma";
 				reg = <0x020ec000 0x4000>;
 				interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi
index d4a000c3dde7..2873369a57c0 100644
--- a/arch/arm/boot/dts/imx6sll.dtsi
+++ b/arch/arm/boot/dts/imx6sll.dtsi
@@ -115,6 +115,9 @@
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 
 		intc: interrupt-controller@a01000 {
diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
index 66af78e83b70..a2c79bcf9a11 100644
--- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
+++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
@@ -107,7 +107,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "microchip,sst25vf016b";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
index dce5dcf96c25..7dda42553f4b 100644
--- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
@@ -123,7 +123,7 @@
 	pinctrl-0 = <&pinctrl_qspi2>;
 	status = "okay";
 
-	flash0: s25fl128s@0 {
+	flash0: flash@0 {
 		reg = <0>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -133,7 +133,7 @@
 		spi-tx-bus-width = <4>;
 	};
 
-	flash1: s25fl128s@2 {
+	flash1: flash@2 {
 		reg = <2>;
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts
index 99f4cf777a38..969cfe920d25 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb.dts
@@ -108,7 +108,7 @@
 	pinctrl-0 = <&pinctrl_qspi2>;
 	status = "okay";
 
-	flash0: n25q256a@0 {
+	flash0: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "micron,n25q256a", "jedec,spi-nor";
@@ -118,7 +118,7 @@
 		reg = <0>;
 	};
 
-	flash1: n25q256a@2 {
+	flash1: flash@2 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "micron,n25q256a", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
index ee645655090d..c84ea1fac5e9 100644
--- a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
+++ b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
@@ -183,6 +183,27 @@
 	status = "okay";
 };
 
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	hdmi-transmitter@70 {
+		compatible = "nxp,tda998x";
+		reg = <0x70>;
+		interrupts-extended = <&gpio3 27 IRQ_TYPE_LEVEL_LOW>;
+
+		ports {
+			port {
+				hdmi: endpoint {
+					remote-endpoint = <&lcdc>;
+				};
+			};
+		};
+	};
+};
+
 &i2c4 { /* Onboard Motion sensors */
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c4>;
@@ -190,10 +211,22 @@
 	status = "disabled";
 };
 
+&lcdif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcd>;
+	status = "okay";
+
+	port {
+		lcdc: endpoint {
+			remote-endpoint = <&hdmi>;
+		};
+	};
+};
+
 &iomuxc {
 	pinctrl_bt_reg: btreggrp {
 		fsl,pins =
-			<MX6SX_PAD_KEY_ROW2__GPIO2_IO_17        0x15059>;
+			<MX6SX_PAD_KEY_ROW2__GPIO2_IO_17	0x15059>;
 	};
 
 	pinctrl_enet1: enet1grp {
@@ -227,12 +260,52 @@
 			<MX6SX_PAD_GPIO1_IO02__I2C2_SCL		0x4001b8b1>;
 	};
 
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins =
+			<MX6SX_PAD_KEY_ROW4__I2C3_SDA			0x4001b8b1>,
+			<MX6SX_PAD_KEY_COL4__I2C3_SCL			0x4001b8b1>;
+	};
+
 	pinctrl_i2c4: i2c4grp {
 		fsl,pins =
 			<MX6SX_PAD_USB_H_DATA__I2C4_SDA		0x4001b8b1>,
 			<MX6SX_PAD_USB_H_STROBE__I2C4_SCL	0x4001b8b1>;
 	};
 
+	pinctrl_lcd: lcdgrp {
+		fsl,pins = <
+			MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23		0x4001b0b0
+			MX6SX_PAD_LCD1_CLK__LCDIF1_CLK		0x4001b0b0
+			MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE		0x4001b0b0
+			MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC		0x4001b0b0
+			MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC		0x4001b0b0
+			MX6SX_PAD_LCD1_RESET__GPIO3_IO_27		0x4001b0b0
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins =
 			<MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX	0x1b0b1>,
@@ -273,24 +346,23 @@
 
 	pinctrl_otg1_reg: otg1grp {
 		fsl,pins =
-			<MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9        0x10b0>;
+			<MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9	0x10b0>;
 	};
 
-
 	pinctrl_otg2_reg: otg2grp {
 		fsl,pins =
-			<MX6SX_PAD_NAND_RE_B__GPIO4_IO_12        0x10b0>;
+			<MX6SX_PAD_NAND_RE_B__GPIO4_IO_12	0x10b0>;
 	};
 
 	pinctrl_usb_otg1: usbotg1grp {
 		fsl,pins =
-			<MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID    0x17059>,
-			<MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC       0x10b0>;
+			<MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID	0x17059>,
+			<MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC	0x10b0>;
 	};
 
 	pinctrl_usb_otg2: usbot2ggrp {
 		fsl,pins =
-			<MX6SX_PAD_QSPI1A_DATA0__USB_OTG2_OC     0x10b0>;
+			<MX6SX_PAD_QSPI1A_DATA0__USB_OTG2_OC	0x10b0>;
 	};
 
 	pinctrl_usdhc2: usdhc2grp {
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index fc6334336b3d..abc3572d699e 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -154,7 +154,7 @@
 		#phy-cells = <0>;
 	};
 
-	soc {
+	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
@@ -164,12 +164,18 @@
 		ocram_s: sram@8f8000 {
 			compatible = "mmio-sram";
 			reg = <0x008f8000 0x4000>;
+			ranges = <0 0x008f8000 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6SX_CLK_OCRAM_S>;
 		};
 
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6SX_CLK_OCRAM>;
 		};
 
@@ -842,7 +848,7 @@
 				reg = <0x020e4000 0x4000>;
 			};
 
-			sdma: sdma@20ec000 {
+			sdma: dma-controller@20ec000 {
 				compatible = "fsl,imx6sx-sdma", "fsl,imx6q-sdma";
 				reg = <0x020ec000 0x4000>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
index a3fde3316c73..c83e64a62d8a 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
@@ -82,7 +82,7 @@
 			"AMIC", "MICB";
 	};
 
-	spi4 {
+	spi-4 {
 		compatible = "spi-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_spi4>;
@@ -286,7 +286,7 @@
 	pinctrl-0 = <&pinctrl_qspi>;
 	status = "okay";
 
-	flash0: n25q256a@0 {
+	flash0: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "micron,n25q256a", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts b/arch/arm/boot/dts/imx6ul-kontron-bl-43.dts
index 5bfad4655b22..0c643706a158 100644
--- a/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts
+++ b/arch/arm/boot/dts/imx6ul-kontron-bl-43.dts
@@ -5,12 +5,12 @@
  * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
  */
 
-#include "imx6ul-kontron-n6310-s.dts"
+#include "imx6ul-kontron-bl.dts"
 
 / {
-	model = "Kontron N6310 S 43";
-	compatible = "kontron,imx6ul-n6310-s-43", "kontron,imx6ul-n6310-s",
-		     "kontron,imx6ul-n6310-som", "fsl,imx6ul";
+	model = "Kontron BL i.MX6UL 43 (N631X S 43)";
+	compatible = "kontron,bl-imx6ul-43", "kontron,bl-imx6ul",
+		     "kontron,sl-imx6ul", "fsl,imx6ul";
 
 	backlight {
 		compatible = "pwm-backlight";
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi b/arch/arm/boot/dts/imx6ul-kontron-bl-common.dtsi
index 770f59b23102..43868311f48a 100644
--- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
+++ b/arch/arm/boot/dts/imx6ul-kontron-bl-common.dtsi
@@ -72,7 +72,6 @@
 &adc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_adc1>;
-	num-channels = <3>;
 	vref-supply = <&reg_vref_adc>;
 	status = "okay";
 };
@@ -178,7 +177,7 @@
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts b/arch/arm/boot/dts/imx6ul-kontron-bl.dts
index 5a3e06d6219b..dadf6d3d5f52 100644
--- a/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts
+++ b/arch/arm/boot/dts/imx6ul-kontron-bl.dts
@@ -7,11 +7,10 @@
 
 /dts-v1/;
 
-#include "imx6ul-kontron-n6310-som.dtsi"
-#include "imx6ul-kontron-n6x1x-s.dtsi"
+#include "imx6ul-kontron-sl.dtsi"
+#include "imx6ul-kontron-bl-common.dtsi"
 
 / {
-	model = "Kontron N6310 S";
-	compatible = "kontron,imx6ul-n6310-s", "kontron,imx6ul-n6310-som",
-		     "fsl,imx6ul";
+	model = "Kontron BL i.MX6UL (N631X S)";
+	compatible = "kontron,bl-imx6ul", "kontron,sl-imx6ul", "fsl,imx6ul";
 };
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi
deleted file mode 100644
index 47d3ce5d255f..000000000000
--- a/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi
+++ /dev/null
@@ -1,41 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 exceet electronics GmbH
- * Copyright (C) 2018 Kontron Electronics GmbH
- * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
- */
-
-#include "imx6ul.dtsi"
-#include "imx6ul-kontron-n6x1x-som-common.dtsi"
-
-/ {
-	model = "Kontron N6310 SOM";
-	compatible = "kontron,imx6ul-n6310-som", "fsl,imx6ul";
-
-	memory@80000000 {
-		reg = <0x80000000 0x10000000>;
-		device_type = "memory";
-	};
-};
-
-&qspi {
-	spi-flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spi-nand";
-		spi-max-frequency = <108000000>;
-		spi-tx-bus-width = <4>;
-		spi-rx-bus-width = <4>;
-		reg = <0>;
-
-		partition@0 {
-			label = "ubi1";
-			reg = <0x00000000 0x08000000>;
-		};
-
-		partition@8000000 {
-			label = "ubi2";
-			reg = <0x08000000 0x08000000>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6311-s.dts b/arch/arm/boot/dts/imx6ul-kontron-n6311-s.dts
deleted file mode 100644
index 239a1af3aeaa..000000000000
--- a/arch/arm/boot/dts/imx6ul-kontron-n6311-s.dts
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 exceet electronics GmbH
- * Copyright (C) 2018 Kontron Electronics GmbH
- */
-
-/dts-v1/;
-
-#include "imx6ul-kontron-n6311-som.dtsi"
-#include "imx6ul-kontron-n6x1x-s.dtsi"
-
-/ {
-	model = "Kontron N6311 S";
-	compatible = "kontron,imx6ul-n6311-s", "kontron,imx6ul-n6311-som",
-		     "fsl,imx6ul";
-};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi
deleted file mode 100644
index a095a7654ac6..000000000000
--- a/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi
+++ /dev/null
@@ -1,40 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 exceet electronics GmbH
- * Copyright (C) 2018 Kontron Electronics GmbH
- */
-
-#include "imx6ul.dtsi"
-#include "imx6ul-kontron-n6x1x-som-common.dtsi"
-
-/ {
-	model = "Kontron N6311 SOM";
-	compatible = "kontron,imx6ul-n6311-som", "fsl,imx6ul";
-
-	memory@80000000 {
-		reg = <0x80000000 0x20000000>;
-		device_type = "memory";
-	};
-};
-
-&qspi {
-	spi-flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spi-nand";
-		spi-max-frequency = <104000000>;
-		spi-tx-bus-width = <4>;
-		spi-rx-bus-width = <4>;
-		reg = <0>;
-
-		partition@0 {
-			label = "ubi1";
-			reg = <0x00000000 0x08000000>;
-		};
-
-		partition@8000000 {
-			label = "ubi2";
-			reg = <0x08000000 0x18000000>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi b/arch/arm/boot/dts/imx6ul-kontron-sl-common.dtsi
index 2a449a3c1ae2..dcf88f610346 100644
--- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
+++ b/arch/arm/boot/dts/imx6ul-kontron-sl-common.dtsi
@@ -11,6 +11,11 @@
 	chosen {
 		stdout-path = &uart4;
 	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x10000000>;
+		device_type = "memory";
+	};
 };
 
 &ecspi2 {
@@ -19,7 +24,7 @@
 	pinctrl-0 = <&pinctrl_ecspi2>;
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		compatible = "mxicy,mx25v8035f", "jedec,spi-nor";
 		spi-max-frequency = <50000000>;
 		reg = <0>;
@@ -55,6 +60,16 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_qspi>;
 	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-nand";
+		spi-max-frequency = <104000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		reg = <0>;
+	};
 };
 
 &wdog1 {
diff --git a/arch/arm/boot/dts/imx6ul-kontron-sl.dtsi b/arch/arm/boot/dts/imx6ul-kontron-sl.dtsi
new file mode 100644
index 000000000000..0580d043e5ae
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-kontron-sl.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#include "imx6ul.dtsi"
+#include "imx6ul-kontron-sl-common.dtsi"
+
+/ {
+	model = "Kontron SL i.MX6UL (N631X SOM)";
+	compatible = "kontron,sl-imx6ul", "fsl,imx6ul";
+};
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi
index 7cda6944501d..ec042648bd98 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi
+++ b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi
@@ -11,7 +11,7 @@
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <5>;
 		power-supply = <&reg_backlight_en>;
-		pwms = <&pwm3 0 5000000>;
+		pwms = <&pwm3 0 5000000 0>;
 		status = "disabled";
 	};
 
@@ -72,8 +72,8 @@
 			st,settling = <2>;
 			st,fraction-z = <7>;
 			st,i-drive = <1>;
-			touchscreen-inverted-x = <1>;
-			touchscreen-inverted-y = <1>;
+			touchscreen-inverted-x;
+			touchscreen-inverted-y;
 		};
 	};
 };
@@ -91,7 +91,6 @@
 };
 
 &pwm3 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "disabled";
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
index 0d4ba9494cf2..38ea4dcfa228 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
+++ b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
@@ -83,11 +83,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_adc1>;
 	vref-supply = <&reg_adc1_vref_3v3>;
-	/*
-	 * driver can not separate a specific channel so we request 4 channels
-	 * here - we need only the fourth channel
-	 */
-	num-channels = <4>;
 	status = "disabled";
 };
 
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi
new file mode 100644
index 000000000000..eca94ed6451b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi
@@ -0,0 +1,211 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/*
+ * Common for
+ * - TQMa6ULx
+ * - TQMa6ULxL
+ * - TQMa6ULLx
+ * - TQMa6ULLxL
+ */
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_recovery>;
+	scl-gpios = <&gpio1 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pfuze3000: pmic@8 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			reg_sw1a: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-ramp-delay = <6250>;
+				/* not used */
+			};
+
+			reg_sw1b_core: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			reg_sw2: sw2 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			reg_sw3_ddr: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_swbst: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				/* not used */
+			};
+
+			reg_snvs_3v0: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vrefddr: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vccsd: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			reg_v33_3v3: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			reg_vldo1_3v3: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				/* not used */
+			};
+
+			reg_vldo2: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				/* not used */
+			};
+
+			reg_vldo3: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				/* not used */
+			};
+
+			reg_vldo4: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	jc42_1a: eeprom-temperature-sensor@1a {
+		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+		reg = <0x1a>;
+	};
+
+	m24c64_50: eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	m24c02_52: eeprom@52 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+		read-only;
+	};
+
+	rtc0: rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pmic>;
+
+	/*
+	 * PMIC & temperature sensor IRQ
+	 * Both do currently not use IRQ
+	 * potentially dangerous if used on baseboard
+	 */
+	pmic-int-hog {
+		gpio-hog;
+		gpios = <24 0>;
+		input;
+	};
+};
+
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay";
+
+	flash0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <33000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		reg = <0>;
+	};
+};
+
+/* eMMC */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz" , "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+
+	bus-width = <8>;
+	disable-wp;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__I2C4_SCL	0x4001b8b0
+			MX6UL_PAD_UART2_RX_DATA__I2C4_SDA	0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c4_recovery: i2c4recoverygrp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20	0x4001b8b0
+			MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21	0x4001b8b0
+		>;
+	};
+
+	pinctrl_pmic: pmic {
+		fsl,pins = <
+			/* PMIC irq */
+			MX6UL_PAD_CSI_DATA03__GPIO4_IO24	0x1b099
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul1-mba6ulx.dts b/arch/arm/boot/dts/imx6ul-tqma6ul1-mba6ulx.dts
new file mode 100644
index 000000000000..f2a5f17f312e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-tqma6ul1-mba6ulx.dts
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include "imx6ul-tqma6ul1.dtsi"
+#include "mba6ulx.dtsi"
+
+/ {
+	model = "TQ-Systems TQMa6UL1 SoM on MBa6ULx board";
+	compatible = "tq,imx6ul-tqma6ul1-mba6ulx", "tq,imx6ul-tqma6ul1", "fsl,imx6ul";
+};
+
+/*
+ * Note: can2 and fec2 are enabled on mba6ulx level (for i.MX6ULG2 usage)
+ * and need to be disabled here again
+ */
+&can2 {
+	status = "disabled";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>, <&pinctrl_enet1_mdc>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			max-speed = <100>;
+			reg = <0>;
+		};
+	};
+};
+
+&fec2 {
+	/delete-property/ phy-handle;
+	/delete-node/ mdio;
+};
+
+&iomuxc {
+	pinctrl_enet1_mdc: enet1mdcgrp {
+		fsl,pins = <
+			/* mdio */
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul1.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ul1.dtsi
new file mode 100644
index 000000000000..24192d012ef7
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-tqma6ul1.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include "imx6ul-tqma6ul2.dtsi"
+
+/ {
+	model = "TQ-Systems TQMa6UL1 SoM";
+	compatible = "tq,imx6ul-tqma6ul1", "fsl,imx6ul";
+};
+
+/*
+ * There are no module specific differences compared to TQMa6UL2,
+ * only external interfaces differ
+ */
+
+/*
+ * Devices not available on i.MX6ULG1 and should not be enabled on
+ * mainboard level (again)
+ */
+&can2 {
+	status = "disabled";
+};
+
+&csi {
+	status = "disabled";
+};
+
+&fec2 {
+	status = "disabled";
+};
+
+&lcdif {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul2-mba6ulx.dts b/arch/arm/boot/dts/imx6ul-tqma6ul2-mba6ulx.dts
new file mode 100644
index 000000000000..0757df2b8f48
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-tqma6ul2-mba6ulx.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include "imx6ul-tqma6ul2.dtsi"
+#include "mba6ulx.dtsi"
+
+/ {
+	model = "TQ-Systems TQMa6ULx SoM on MBa6ULx board";
+	compatible = "tq,imx6ul-tqma6ul2-mba6ulx", "tq,imx6ul-tqma6ul2", "fsl,imx6ul";
+};
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul2.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ul2.dtsi
new file mode 100644
index 000000000000..e2e95dd92263
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-tqma6ul2.dtsi
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include "imx6ul.dtsi"
+#include "imx6ul-tqma6ul-common.dtsi"
+#include "imx6ul-tqma6ulx-common.dtsi"
+
+/ {
+	model = "TQ-Systems TQMa6UL2 SoM";
+	compatible = "tq,imx6ul-tqma6ul2", "fsl,imx6ul";
+};
+
+&usdhc2 {
+	fsl,tuning-step = <6>;
+};
+
+&iomuxc {
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x00017051
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x00017051
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x00017051
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x00017051
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x00017051
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x00017051
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x00017051
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x00017051
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x00017051
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x00017051
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x000170e1
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x000170f1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x000170f1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x000170f1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x000170f1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x000170f1
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x000170f1
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x000170f1
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x000170f1
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x000170f1
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x000170f1
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x000170e1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x000170e1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x000170e1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x000170e1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x000170e1
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x000170e1
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x000170e1
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x000170e1
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x000170e1
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul2l-mba6ulx.dts b/arch/arm/boot/dts/imx6ul-tqma6ul2l-mba6ulx.dts
new file mode 100644
index 000000000000..9d9b6b744a1c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-tqma6ul2l-mba6ulx.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include "imx6ul-tqma6ul2l.dtsi"
+#include "mba6ulx.dtsi"
+
+/ {
+	model = "TQ Systems TQMa6UL2L SoM on MBa6ULx board";
+	compatible = "tq,imx6ul-tqma6ul2l-mba6ulx", "tq,imx6ul-tqma6ul2l", "fsl,imx6ul";
+};
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul2l.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ul2l.dtsi
new file mode 100644
index 000000000000..4b87e2dc70dc
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-tqma6ul2l.dtsi
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include "imx6ul.dtsi"
+#include "imx6ul-tqma6ul-common.dtsi"
+#include "imx6ul-tqma6ulxl-common.dtsi"
+
+/ {
+	model = "TQ-Systems TQMa6UL2L SoM";
+	compatible = "tq,imx6ul-tqma6ul2l", "fsl,imx6ul";
+};
+
+&usdhc2 {
+	fsl,tuning-step = <6>;
+};
+
+&iomuxc {
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x00017051
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x00017051
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x00017051
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x00017051
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x00017051
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x00017051
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x00017051
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x00017051
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x00017051
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x00017051
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x000170e1
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x000170f1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x000170f1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x000170f1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x000170f1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x000170f1
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x000170f1
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x000170f1
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x000170f1
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x000170f1
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x000170f9
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x000170f1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x000170f1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x000170f1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x000170f1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x000170f1
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x000170f1
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x000170f1
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x000170f1
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x000170f1
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ulx-common.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ulx-common.dtsi
new file mode 100644
index 000000000000..5afb9046c202
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-tqma6ulx-common.dtsi
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/*
+ * Common for
+ * - TQMa6ULx
+ * - TQMa6ULLx
+ */
+
+&m24c64_50 {
+	vcc-supply = <&reg_sw2>;
+};
+
+&m24c02_52 {
+	vcc-supply = <&reg_sw2>;
+};
+
+&reg_sw2 {
+	regulator-boot-on;
+	regulator-always-on;
+};
+
+/* eMMC */
+&usdhc2 {
+	vmmc-supply = <&reg_sw2>;
+	vqmmc-supply = <&reg_vldo4>;
+};
+
+&iomuxc {
+	pinctrl_qspi: qspigrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK      0x70b9
+			MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70b9
+			MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01   0x70b9
+			MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02   0x70b9
+			MX6UL_PAD_NAND_CLE__QSPI_A_DATA03     0x70b9
+			MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B      0x70a1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ulxl-common.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ulxl-common.dtsi
new file mode 100644
index 000000000000..ba84a4f70ebd
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-tqma6ulxl-common.dtsi
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/*
+ * Common for
+ * - TQMa6ULxL
+ * - TQMa6ULLxL
+ */
+
+/ {
+	reg_vin: reg-vin {
+		compatible = "regulator-fixed";
+		regulator-name = "VIN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&m24c64_50 {
+	vcc-supply = <&reg_vin>;
+};
+
+&m24c02_52 {
+	vcc-supply = <&reg_vin>;
+};
+
+/* eMMC */
+&usdhc2 {
+	vmmc-supply = <&reg_vin>;
+	vqmmc-supply = <&reg_vldo4>;
+};
+
+&iomuxc {
+	pinctrl_qspi: qspigrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK      0x70a9
+			MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a9
+			MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01   0x70a9
+			MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02   0x70a9
+			MX6UL_PAD_NAND_CLE__QSPI_A_DATA03     0x70a9
+			MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B      0x70a1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts b/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts
index 97686097a86e..92ac0edcb608 100644
--- a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts
+++ b/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts
@@ -119,7 +119,7 @@
 	/delete-node/ codec@a;
 	/delete-node/ touchscreen@48;
 
-	rtc: mcp7940x@6f {
+	rtc: rtc@6f {
 		compatible = "microchip,mcp7940x";
 		reg = <0x6f>;
 	};
diff --git a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
index c485d058e079..15ee0275feaf 100644
--- a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
@@ -212,7 +212,7 @@
 		enable-active-high;
 	};
 
-	spi_gpio: spi-gpio {
+	spi_gpio: spi {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "spi-gpio";
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index afeec01f6522..2b5996395701 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -64,20 +64,18 @@
 			clock-frequency = <696000000>;
 			clock-latency = <61036>; /* two CLK32 periods */
 			#cooling-cells = <2>;
-			operating-points = <
+			operating-points =
 				/* kHz	uV */
-				696000	1275000
-				528000	1175000
-				396000	1025000
-				198000	950000
-			>;
-			fsl,soc-operating-points = <
+				<696000	1275000>,
+				<528000	1175000>,
+				<396000	1025000>,
+				<198000	950000>;
+			fsl,soc-operating-points =
 				/* KHz	uV */
-				696000	1275000
-				528000	1175000
-				396000	1175000
-				198000	1175000
-			>;
+				<696000	1275000>,
+				<528000	1175000>,
+				<396000	1175000>,
+				<198000	1175000>;
 			clocks = <&clks IMX6UL_CLK_ARM>,
 				 <&clks IMX6UL_CLK_PLL2_BUS>,
 				 <&clks IMX6UL_CLK_PLL2_PFD2>,
@@ -139,7 +137,7 @@
 		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
-	soc {
+	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
@@ -149,6 +147,9 @@
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 
 		intc: interrupt-controller@a01000 {
@@ -543,7 +544,7 @@
 			};
 
 			kpp: keypad@20b8000 {
-				compatible = "fsl,imx6ul-kpp", "fsl,imx6q-kpp", "fsl,imx21-kpp";
+				compatible = "fsl,imx6ul-kpp", "fsl,imx21-kpp";
 				reg = <0x020b8000 0x4000>;
 				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6UL_CLK_KPP>;
@@ -743,7 +744,7 @@
 				status = "disabled";
 			};
 
-			sdma: sdma@20ec000 {
+			sdma: dma-controller@20ec000 {
 				compatible = "fsl,imx6ul-sdma", "fsl,imx6q-sdma",
 					     "fsl,imx35-sdma";
 				reg = <0x020ec000 0x4000>;
@@ -923,7 +924,6 @@
 				reg = <0x02198000 0x4000>;
 				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6UL_CLK_ADC1>;
-				num-channels = <2>;
 				clock-names = "adc";
 				fsl,adck-max-frequency = <30000000>, <40000000>,
 							 <20000000>;
@@ -998,7 +998,7 @@
 			};
 
 			csi: csi@21c4000 {
-				compatible = "fsl,imx6ul-csi", "fsl,imx7-csi";
+				compatible = "fsl,imx6ul-csi";
 				reg = <0x021c4000 0x4000>;
 				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6UL_CLK_CSI>;
@@ -1007,7 +1007,7 @@
 			};
 
 			lcdif: lcdif@21c8000 {
-				compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif";
+				compatible = "fsl,imx6ul-lcdif", "fsl,imx6sx-lcdif";
 				reg = <0x021c8000 0x4000>;
 				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6UL_CLK_LCDIF_PIX>,
@@ -1028,7 +1028,7 @@
 			qspi: spi@21e0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi";
+				compatible = "fsl,imx6ul-qspi";
 				reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
 				reg-names = "QuadSPI", "QuadSPI-memory";
 				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/imx6ull-colibri-aster.dts b/arch/arm/boot/dts/imx6ull-colibri-aster.dts
new file mode 100644
index 000000000000..d3f2fb7c6c1e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-aster.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017-2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-nonwifi.dtsi"
+#include "imx6ull-colibri-aster.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 256/512MB on Colibri Aster";
+	compatible = "toradex,colibri-imx6ull-aster",
+		     "toradex,colibri-imx6ull",
+		     "fsl,imx6ull";
+};
+
+&atmel_mxt_ts {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-aster.dtsi b/arch/arm/boot/dts/imx6ull-colibri-aster.dtsi
new file mode 100644
index 000000000000..c9133ba2d705
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-aster.dtsi
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017-2022 Toradex
+ */
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_snvs_gpiokeys>;
+
+		power {
+			label = "Wake-Up";
+			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh_reg>;
+		regulator-name = "VCC_USB[1-4]";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		vin-supply = <&reg_5v0>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&ecspi1 {
+	status = "okay";
+
+	num-cs = <2>;
+	cs-gpios = <
+		&gpio3 26 GPIO_ACTIVE_HIGH /* SODIMM 86 LCD_DATA21 */
+		&gpio4 28 GPIO_ACTIVE_HIGH /* SODIMM 65 CSI_DATA07 */
+	>;
+};
+
+/*
+ * Following SODIMM Pins should not be accessed as GPIO on Aster board:
+ * 134 - AIN5_SCL (no connection)
+ * 127 - Voltage Level Translator OE# signal (IC11 and IC12)
+ *
+ * To configure GPIO to LED5, please disable FEC2 and uncomment the following:
+ *	&iomuxc {
+ *		pinctrl-names = "default";
+ *		pinctrl-0 = <
+ *			&pinctrl_gpio1
+ *			&pinctrl_gpio2
+ *			&pinctrl_gpio3
+ *			&pinctrl_gpio4
+ *			&pinctrl_gpio6 - for non-WiFi modules only
+ *			&pinctrl_gpio7
+ *			&pinctrl_gpio_aster
+ *		>;
+ *
+ *		pinctrl_gpio_aster: gpio-aster {
+ *			fsl,pins = <
+ *				MX6UL_PAD_GPIO1_IO07__GPIO1_IO07    0x1b0b0
+ *			>;
+ *		};
+ *  };
+ */
+
+&i2c1 {
+	status = "okay";
+
+	m41t0m6: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+/* PWM <A> */
+&pwm4 {
+	status = "okay";
+};
+
+/* PWM <B> */
+&pwm5 {
+	status = "okay";
+};
+
+/* PWM <C> */
+&pwm6 {
+	status = "okay";
+};
+
+/* PWM <D> */
+&pwm7 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usbh_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usbh_vbus>;
+	status = "okay";
+};
+
+&usdhc1 {
+	vmmc-supply = <&reg_3v3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-emmc-aster.dts b/arch/arm/boot/dts/imx6ull-colibri-emmc-aster.dts
new file mode 100644
index 000000000000..919c0464d6cb
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-emmc-aster.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-emmc-nonwifi.dtsi"
+#include "imx6ull-colibri-aster.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 1GB (eMMC) on Colibri Aster";
+	compatible = "toradex,colibri-imx6ull-emmc-aster",
+		     "toradex,colibri-imx6ull-emmc",
+		     "toradex,colibri-imx6ull",
+		     "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-emmc-iris-v2.dts b/arch/arm/boot/dts/imx6ull-colibri-emmc-iris-v2.dts
new file mode 100644
index 000000000000..b9060c2f7977
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-emmc-iris-v2.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-emmc-nonwifi.dtsi"
+#include "imx6ull-colibri-iris-v2.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 1G (eMMC) on Colibri Iris V2";
+	compatible = "toradex,colibri-imx6ull-iris-v2",
+		     "toradex,colibri-imx6ull-emmc",
+		     "toradex,colibri-imx6ull",
+		     "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-emmc-iris.dts b/arch/arm/boot/dts/imx6ull-colibri-emmc-iris.dts
new file mode 100644
index 000000000000..0ab71f2f5daa
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-emmc-iris.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-emmc-nonwifi.dtsi"
+#include "imx6ull-colibri-iris.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 1GB (eMMC) on Colibri Iris";
+	compatible = "toradex,colibri-imx6ull-emmc-iris",
+		     "toradex,colibri-imx6ull-emmc",
+		     "toradex,colibri-imx6ull",
+		     "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi
index a099abfdfa27..ea238525d5c0 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2021 Toradex
+ * Copyright 2022 Toradex
  */
 
 #include "imx6ull-colibri.dtsi"
@@ -8,7 +8,7 @@
 / {
 	aliases {
 		mmc0 = &usdhc2; /* eMMC */
-		mmc1 = &usdhc1; /* MMC 4bit slot */
+		mmc1 = &usdhc1; /* MMC 4-bit slot */
 	};
 
 	memory@80000000 {
@@ -154,6 +154,7 @@
 			  "SODIMM_127";
 };
 
+/* NAND */
 &gpmi {
 	status = "disabled";
 };
@@ -170,6 +171,7 @@
 	pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio3>;
 };
 
+/* eMMC */
 &usdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2emmc>;
diff --git a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts
index 08669a18349e..9bf7111d7b00 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2018 Toradex AG
+ * Copyright 2018-2022 Toradex
  */
 
 /dts-v1/;
@@ -9,6 +9,6 @@
 #include "imx6ull-colibri-eval-v3.dtsi"
 
 / {
-	model = "Toradex Colibri iMX6ULL 256MB on Colibri Evaluation Board V3";
+	model = "Toradex Colibri iMX6ULL 256/512MB on Colibri Evaluation Board V3";
 	compatible = "toradex,colibri-imx6ull-eval", "fsl,imx6ull";
 };
diff --git a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi
index a78849fd2afa..e29907428c20 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2017 Toradex AG
+ * Copyright 2017-2022 Toradex
  */
 
 / {
@@ -8,20 +8,6 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_snvs_gpiokeys>;
-
-		power {
-			label = "Wake-Up";
-			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_WAKEUP>;
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-	};
-
 	/* fixed crystal dedicated to mcp2515 */
 	clk16m: clk16m {
 		compatible = "fixed-clock";
@@ -29,18 +15,6 @@
 		clock-frequency = <16000000>;
 	};
 
-	panel: panel {
-		compatible = "edt,et057090dhu";
-		backlight = <&bl>;
-		power-supply = <&reg_3v3>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lcdif_out>;
-			};
-		};
-	};
-
 	reg_3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "3.3V";
@@ -71,14 +45,6 @@
 	status = "okay";
 };
 
-&bl {
-	brightness-levels = <0 4 8 16 32 64 128 255>;
-	default-brightness-level = <6>;
-	power-supply = <&reg_3v3>;
-	pwms = <&pwm4 0 5000000 1>;
-	status = "okay";
-};
-
 &ecspi1 {
 	status = "okay";
 
@@ -107,16 +73,6 @@
 	};
 };
 
-&lcdif {
-	status = "okay";
-
-	port {
-		lcdif_out: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
-};
-
 /* PWM <A> */
 &pwm4 {
 	status = "okay";
@@ -150,6 +106,7 @@
 };
 
 &usbotg1 {
+	vbus-supply = <&reg_usbh_vbus>;
 	status = "okay";
 };
 
@@ -159,20 +116,6 @@
 };
 
 &usdhc1 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
-	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd>;
-	pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_snvs_usdhc1_cd>;
-	pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_snvs_usdhc1_cd>;
-	pinctrl-3 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_sleep_cd>;
-	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
-	disable-wp;
-	wakeup-source;
-	keep-power-in-suspend;
 	vmmc-supply = <&reg_3v3>;
-	vqmmc-supply = <&reg_sd1_vmmc>;
-	sd-uhs-sdr12;
-	sd-uhs-sdr25;
-	sd-uhs-sdr50;
-	sd-uhs-sdr104;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts b/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts
new file mode 100644
index 000000000000..afc1e0119783
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-nonwifi.dtsi"
+#include "imx6ull-colibri-iris-v2.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 256M/512B on Colibri Iris V2";
+	compatible = "toradex,colibri-imx6ull-iris-v2",
+		     "toradex,colibri-imx6ull",
+		     "fsl,imx6ull";
+};
+
+&atmel_mxt_ts {
+	status = "okay";
+};
+
+&gpio1 {
+	/* This turns the LVDS transceiver on */
+	lvds-power-on {
+		gpio-hog;
+		gpios = <14 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */
+		line-name = "LVDS_POWER_ON";
+		output-high;
+	};
+};
+
+&gpio2 {
+	/*
+	 * This switches the LVDS transceiver to the single-channel
+	 * output mode.
+	 */
+	lvds-ch-mode {
+		gpio-hog;
+		gpios = <0 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */
+		line-name = "LVDS_CH_MODE";
+		output-high;
+	};
+
+	/*
+	 * This switches the LVDS transceiver to the 24-bit RGB mode.
+	 */
+	lvds-rgb-mode {
+		gpio-hog;
+		gpios = <1 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */
+		line-name = "LVDS_RGB_MODE";
+		output-low;
+	};
+};
+
+&gpio5 {
+	/*
+	 * This switches the LVDS transceiver to VESA color mapping mode.
+	 */
+	lvds-color-map {
+		gpio-hog;
+		gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */
+		line-name = "LVDS_COLOR_MAP";
+		output-low;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dtsi b/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dtsi
new file mode 100644
index 000000000000..93649cad0cc0
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+#include "imx6ull-colibri-iris.dtsi"
+
+/ {
+	reg_3v3_vmmc: regulator-3v3-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3_vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <100>;
+		enable-active-high;
+	};
+};
+
+
+&usdhc1 {
+	cap-power-off-card;
+	vmmc-supply = <&reg_3v3_vmmc>;
+	/delete-property/ keep-power-in-suspend;
+	/delete-property/ no-1-8-v;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-iris.dts b/arch/arm/boot/dts/imx6ull-colibri-iris.dts
new file mode 100644
index 000000000000..4fb97b0fe30b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-iris.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-nonwifi.dtsi"
+#include "imx6ull-colibri-iris.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 256/512MB on Colibri Iris";
+	compatible = "toradex,colibri-imx6ull-iris",
+		     "toradex,colibri-imx6ull",
+		     "fsl,imx6ull";
+};
+
+&atmel_mxt_ts {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi b/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi
new file mode 100644
index 000000000000..7f3b37baba88
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_snvs_gpiokeys>;
+
+		power {
+			label = "Wake-Up";
+			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh_reg>;
+		regulator-name = "VCC_USB[1-4]";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		vin-supply = <&reg_5v0>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&gpio1 {
+	/*
+	 * uart25_tx_on turns the UART transceiver on. If one wants to turn the
+	 * transceiver off, that property has to be deleted and the gpio handled
+	 * in userspace.
+	 * The same applies to uart1_tx_on.
+	 */
+	uart25_tx_on {
+		gpio-hog;
+		gpios = <15 0>;
+		output-high;
+	};
+};
+
+&gpio2 {
+	uart1_tx_on {
+		gpio-hog;
+		gpios = <7 0>;
+		output-high;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	m41t0m6: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+/* PWM <A> */
+&pwm4 {
+	status = "okay";
+};
+
+/* PWM <B> */
+&pwm5 {
+	status = "okay";
+};
+
+/* PWM <C> */
+&pwm6 {
+	status = "okay";
+};
+
+/* PWM <D> */
+&pwm7 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usbh_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usbh_vbus>;
+	status = "okay";
+};
+
+&usdhc1 {
+	vmmc-supply = <&reg_3v3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi
index 95a11b8bcbdb..88901db255d6 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2018 Toradex AG
+ * Copyright 2018-2022 Toradex
  */
 
 #include "imx6ull-colibri.dtsi"
@@ -12,13 +12,150 @@
 	};
 };
 
+&gpio1 {
+	gpio-line-names = "SODIMM_8",
+			  "SODIMM_6",
+			  "SODIMM_129",
+			  "SODIMM_89",
+			  "SODIMM_19",
+			  "SODIMM_21",
+			  "UNUSABLE_SODIMM_180",
+			  "UNUSABLE_SODIMM_184",
+			  "SODIMM_4",
+			  "SODIMM_2",
+			  "SODIMM_106",
+			  "SODIMM_71",
+			  "SODIMM_23",
+			  "SODIMM_31",
+			  "SODIMM_99",
+			  "SODIMM_102",
+			  "SODIMM_33",
+			  "SODIMM_35",
+			  "SODIMM_25",
+			  "SODIMM_27",
+			  "SODIMM_36",
+			  "SODIMM_38",
+			  "SODIMM_32",
+			  "SODIMM_34",
+			  "SODIMM_135",
+			  "SODIMM_77",
+			  "SODIMM_100",
+			  "SODIMM_186",
+			  "SODIMM_196",
+			  "SODIMM_194";
+};
+
+&gpio2 {
+	gpio-line-names = "SODIMM_55",
+			  "SODIMM_63",
+			  "SODIMM_178",
+			  "SODIMM_188",
+			  "SODIMM_73",
+			  "SODIMM_30",
+			  "SODIMM_67",
+			  "SODIMM_104",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_190",
+			  "SODIMM_47",
+			  "SODIMM_192",
+			  "SODIMM_49",
+			  "SODIMM_51",
+			  "SODIMM_53";
+};
+
+&gpio3 {
+	gpio-line-names = "SODIMM_56",
+			  "SODIMM_44",
+			  "SODIMM_68",
+			  "SODIMM_82",
+			  "",
+			  "SODIMM_76",
+			  "SODIMM_70",
+			  "SODIMM_60",
+			  "SODIMM_58",
+			  "SODIMM_78",
+			  "SODIMM_72",
+			  "SODIMM_80",
+			  "SODIMM_46",
+			  "SODIMM_62",
+			  "SODIMM_48",
+			  "SODIMM_74",
+			  "SODIMM_50",
+			  "SODIMM_52",
+			  "SODIMM_54",
+			  "SODIMM_66",
+			  "SODIMM_64",
+			  "SODIMM_57",
+			  "SODIMM_61",
+			  "SODIMM_29",
+			  "SODIMM_37",
+			  "SODIMM_88",
+			  "SODIMM_86",
+			  "SODIMM_92",
+			  "SODIMM_90";
+};
+
+&gpio4 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_59",
+			  "",
+			  "",
+			  "SODIMM_133",
+			  "",
+			  "SODIMM_28",
+			  "SODIMM_75",
+			  "SODIMM_96",
+			  "SODIMM_81",
+			  "SODIMM_94",
+			  "SODIMM_101",
+			  "SODIMM_103",
+			  "SODIMM_79",
+			  "SODIMM_97",
+			  "SODIMM_69",
+			  "SODIMM_98",
+			  "SODIMM_85",
+			  "SODIMM_65";
+};
+
+&gpio5 {
+	gpio-line-names = "SODIMM_43",
+			  "SODIMM_45",
+			  "SODIMM_137",
+			  "SODIMM_95",
+			  "SODIMM_107",
+			  "SODIMM_131",
+			  "SODIMM_93",
+			  "",
+			  "SODIMM_138",
+			  "",
+			  "SODIMM_105",
+			  "SODIMM_127";
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3
-		&pinctrl_gpio4 &pinctrl_gpio5 &pinctrl_gpio6 &pinctrl_gpio7>;
+		&pinctrl_gpio4 &pinctrl_gpio6 &pinctrl_gpio7>;
 };
 
 &iomuxc_snvs {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio2 &pinctrl_snvs_gpio3>;
+	pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio3>;
 };
diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-aster.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-aster.dts
new file mode 100644
index 000000000000..b4f65e8c5857
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-wifi-aster.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017-2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-wifi.dtsi"
+#include "imx6ull-colibri-aster.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 512MB on Colibri Aster";
+	compatible = "toradex,colibri-imx6ull-wifi-aster",
+		     "toradex,colibri-imx6ull",
+		     "fsl,imx6ull";
+};
+
+&atmel_mxt_ts {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts
index df72ce1ae2cb..1d64d1a5d8a7 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts
+++ b/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2018 Toradex AG
+ * Copyright 2018-2022 Toradex
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-iris-v2.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-iris-v2.dts
new file mode 100644
index 000000000000..ce02f8a9ddd3
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-wifi-iris-v2.dts
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-wifi.dtsi"
+#include "imx6ull-colibri-iris-v2.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 512MB on Colibri Iris V2";
+	compatible = "toradex,colibri-imx6ull-wifi-iris-v2",
+		     "toradex,colibri-imx6ull",
+		     "fsl,imx6ull";
+};
+
+&atmel_mxt_ts {
+	status = "okay";
+};
+
+&gpio1 {
+	/* This turns the LVDS transceiver on */
+	lvds-power-on {
+		gpio-hog;
+		gpios = <14 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */
+		line-name = "LVDS_POWER_ON";
+		output-high;
+	};
+};
+
+&gpio2 {
+	/*
+	 * This switches the LVDS transceiver to the single-channel
+	 * output mode.
+	 */
+	lvds-ch-mode {
+		gpio-hog;
+		gpios = <0 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */
+		line-name = "LVDS_CH_MODE";
+		output-high;
+	};
+
+	/*
+	 * This switches the LVDS transceiver to the 24-bit RGB mode.
+	 */
+	lvds-rgb-mode {
+		gpio-hog;
+		gpios = <1 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */
+		line-name = "LVDS_RGB_MODE";
+		output-low;
+	};
+};
+
+&gpio5 {
+	/*
+	 * This switches the LVDS transceiver to VESA color mapping mode.
+	 */
+	lvds-color-map {
+		gpio-hog;
+		gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */
+		line-name = "LVDS_COLOR_MAP";
+		output-low;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-iris.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-iris.dts
new file mode 100644
index 000000000000..5ac1aa298ce7
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-wifi-iris.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-wifi.dtsi"
+#include "imx6ull-colibri-iris.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 512MB on Colibri Iris";
+	compatible = "toradex,colibri-imx6ull-wifi-iris",
+		     "toradex,colibri-imx6ull",
+		     "fsl,imx6ull";
+};
+
+&atmel_mxt_ts {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
index 9f1e38282bee..db59ee6b1c86 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2018 Toradex AG
+ * Copyright 2018-2022 Toradex
  */
 
 #include "imx6ull-colibri.dtsi"
@@ -23,16 +23,152 @@
 	clock-frequency = <792000000>;
 };
 
+&gpio1 {
+	gpio-line-names = "SODIMM_8",
+			  "SODIMM_6",
+			  "SODIMM_129",
+			  "",
+			  "SODIMM_19",
+			  "SODIMM_21",
+			  "UNUSABLE_SODIMM_180",
+			  "UNUSABLE_SODIMM_184",
+			  "SODIMM_4",
+			  "SODIMM_2",
+			  "SODIMM_106",
+			  "SODIMM_71",
+			  "SODIMM_23",
+			  "SODIMM_31",
+			  "SODIMM_99",
+			  "SODIMM_102",
+			  "SODIMM_33",
+			  "SODIMM_35",
+			  "SODIMM_25",
+			  "SODIMM_27",
+			  "SODIMM_36",
+			  "SODIMM_38",
+			  "SODIMM_32",
+			  "SODIMM_34",
+			  "SODIMM_135",
+			  "SODIMM_77",
+			  "SODIMM_100",
+			  "SODIMM_186",
+			  "SODIMM_196",
+			  "SODIMM_194";
+};
+
+&gpio2 {
+	gpio-line-names = "SODIMM_55",
+			  "SODIMM_63",
+			  "SODIMM_178",
+			  "SODIMM_188",
+			  "SODIMM_73",
+			  "SODIMM_30",
+			  "SODIMM_67",
+			  "SODIMM_104",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_190",
+			  "SODIMM_47",
+			  "SODIMM_192",
+			  "SODIMM_49",
+			  "SODIMM_51",
+			  "SODIMM_53";
+};
+
+&gpio3 {
+	gpio-line-names = "SODIMM_56",
+			  "SODIMM_44",
+			  "SODIMM_68",
+			  "SODIMM_82",
+			  "",
+			  "SODIMM_76",
+			  "SODIMM_70",
+			  "SODIMM_60",
+			  "SODIMM_58",
+			  "SODIMM_78",
+			  "SODIMM_72",
+			  "SODIMM_80",
+			  "SODIMM_46",
+			  "SODIMM_62",
+			  "SODIMM_48",
+			  "SODIMM_74",
+			  "SODIMM_50",
+			  "SODIMM_52",
+			  "SODIMM_54",
+			  "SODIMM_66",
+			  "SODIMM_64",
+			  "SODIMM_57",
+			  "SODIMM_61",
+			  "SODIMM_29",
+			  "SODIMM_37",
+			  "SODIMM_88",
+			  "SODIMM_86",
+			  "SODIMM_92",
+			  "SODIMM_90";
+};
+
+&gpio4 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_59",
+			  "",
+			  "",
+			  "SODIMM_133",
+			  "",
+			  "SODIMM_28",
+			  "SODIMM_75",
+			  "SODIMM_96",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_69",
+			  "SODIMM_98",
+			  "SODIMM_85",
+			  "SODIMM_65";
+};
+
+&gpio5 {
+	gpio-line-names = "SODIMM_43",
+			  "SODIMM_45",
+			  "SODIMM_137",
+			  "SODIMM_95",
+			  "SODIMM_107",
+			  "SODIMM_131",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_105";
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3
-		&pinctrl_gpio4 &pinctrl_gpio5 &pinctrl_gpio7>;
+		&pinctrl_gpio4 &pinctrl_gpio7>;
 
 };
 
 &iomuxc_snvs {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio2>;
+	pinctrl-0 = <&pinctrl_snvs_gpio1>;
 };
 
 &usdhc2 {
diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi
index 7f35a06dff95..577a424b0e1d 100644
--- a/arch/arm/boot/dts/imx6ull-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi
@@ -1,22 +1,54 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2018-2021 Toradex
+ * Copyright 2018-2022 Toradex
  */
 
 #include "imx6ull.dtsi"
 
 / {
+	/* Ethernet aliases to ensure correct MAC addresses */
 	aliases {
 		ethernet0 = &fec2;
 		ethernet1 = &fec1;
 	};
 
-	bl: backlight {
+	backlight: backlight {
 		compatible = "pwm-backlight";
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		enable-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_bl_on>;
-		enable-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
-		status = "disabled";
+		power-supply = <&reg_3v3>;
+		pwms = <&pwm4 0 5000000 1>;
+		status = "okay";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_snvs_gpiokeys>;
+
+		wakeup {
+			debounce-interval = <10>;
+			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* SODIMM 45 */
+			label = "Wake-Up";
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	panel_dpi: panel-dpi {
+		compatible = "edt,et057090dhu";
+		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
+		status = "okay";
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcdif_out>;
+			};
+		};
 	};
 
 	reg_module_3v3: regulator-module-3v3 {
@@ -35,9 +67,9 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
-	reg_sd1_vmmc: regulator-sd1-vmmc {
+	reg_sd1_vqmmc: regulator-sd1-vqmmc {
 		compatible = "regulator-gpio";
-		gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+		gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_snvs_reg_sd>;
 		regulator-always-on;
@@ -47,11 +79,24 @@
 		states = <1800000 0x1 3300000 0x0>;
 		vin-supply = <&reg_module_3v3>;
 	};
+
+	reg_eth_phy: regulator-eth-phy {
+		compatible = "regulator-fixed-clock";
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "+V3.3_ETH";
+		regulator-type = "voltage";
+		vin-supply = <&reg_module_3v3>;
+		clocks = <&clks IMX6UL_CLK_ENET2_REF_125M>;
+		startup-delay-us = <150000>;
+	};
 };
 
 &adc1 {
-	num-channels = <10>;
 	vref-supply = <&reg_module_3v3_avdd>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc1>;
 };
 
 &can1 {
@@ -73,12 +118,14 @@
 	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
 };
 
+/* Ethernet */
 &fec2 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&pinctrl_enet2>;
 	pinctrl-1 = <&pinctrl_enet2_sleep>;
 	phy-mode = "rmii";
 	phy-handle = <&ethphy1>;
+	phy-supply = <&reg_eth_phy>;
 	status = "okay";
 
 	mdio {
@@ -93,9 +140,11 @@
 	};
 };
 
+/* NAND */
 &gpmi {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	fsl,use-minimum-ecc;
 	nand-on-flash-bbt;
 	nand-ecc-mode = "hw";
 	nand-ecc-strength = <8>;
@@ -103,15 +152,35 @@
 	status = "okay";
 };
 
+/* I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board) */
 &i2c1 {
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
 	pinctrl-1 = <&pinctrl_i2c1_gpio>;
 	sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	/* Atmel maxtouch controller */
+	atmel_mxt_ts: touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_atmel_conn &pinctrl_atmel_snvs_conn>;
+		reg = <0x4a>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;       /* SODIMM 107 / INT */
+		reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;    /* SODIMM 106 / RST */
+		status = "disabled";
+	};
 };
 
+/*
+ * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
+ * touch screen controller
+ */
 &i2c2 {
+	/* Use low frequency to compensate for the high pull-up values. */
+	clock-frequency = <40000>;
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	pinctrl-1 = <&pinctrl_i2c2_gpio>;
@@ -119,7 +188,7 @@
 	scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
-	ad7879@2c {
+	ad7879_ts: touchscreen@2c {
 		compatible = "adi,ad7879-1";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_snvs_ad7879_int>;
@@ -140,23 +209,33 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_lcdif_dat
 		     &pinctrl_lcdif_ctrl>;
+
+	port {
+		lcdif_out: endpoint {
+			remote-endpoint = <&lcd_panel_in>;
+		};
+	};
 };
 
+/* PWM <A> */
 &pwm4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 };
 
+/* PWM <B> */
 &pwm5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm5>;
 };
 
+/* PWM <C> */
 &pwm6 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm6>;
 };
 
+/* PWM <D> */
 &pwm7 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm7>;
@@ -170,6 +249,7 @@
 	status = "disabled";
 };
 
+/* Colibri UART_A */
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1>;
@@ -177,6 +257,7 @@
 	fsl,dte-mode;
 };
 
+/* Colibri UART_B */
 &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
@@ -184,12 +265,14 @@
 	fsl,dte-mode;
 };
 
+/* Colibri UART_C */
 &uart5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart5>;
 	fsl,dte-mode;
 };
 
+/* Colibri USBC */
 &usbotg1 {
 	dr_mode = "otg";
 	srp-disable;
@@ -197,14 +280,28 @@
 	adp-disable;
 };
 
+/* Colibri USBH */
 &usbotg2 {
 	dr_mode = "host";
 };
 
+/* Colibri MMC/SD */
 &usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_snvs_usdhc1_cd>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_snvs_usdhc1_cd>;
+	pinctrl-3 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd_sleep>;
 	assigned-clocks = <&clks IMX6UL_CLK_USDHC1_SEL>, <&clks IMX6UL_CLK_USDHC1>;
 	assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
 	assigned-clock-rates = <0>, <198000000>;
+	bus-width = <4>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; /* MMC_CD */
+	disable-wp;
+	keep-power-in-suspend;
+	no-1-8-v;
+	vqmmc-supply = <&reg_sd1_vqmmc>;
+	wakeup-source;
 };
 
 &wdog1 {
@@ -214,13 +311,35 @@
 };
 
 &iomuxc {
-	pinctrl_can_int: canint-grp {
+	pinctrl_adc1: adc1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__GPIO1_IO00        0x3000 /* SODIMM 8 */
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01        0x3000 /* SODIMM 6 */
+			MX6UL_PAD_GPIO1_IO08__GPIO1_IO08        0x3000 /* SODIMM 4 */
+			MX6UL_PAD_GPIO1_IO09__GPIO1_IO09        0x3000 /* SODIMM 2 */
+		>;
+	};
+
+	pinctrl_atmel_adap: atmeladapgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_DQS__GPIO4_IO16          0xb0a0  /* SODIMM 28 */
+			MX6UL_PAD_ENET1_TX_EN__GPIO2_IO05       0xb0a0  /* SODIMM 30 */
+		>;
+	};
+
+	pinctrl_atmel_conn: atmelconngrp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_MOD__GPIO1_IO10          0xb0a0  /* SODIMM 106 */
+		>;
+	};
+
+	pinctrl_can_int: canintgrp {
 		fsl,pins = <
 			MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04	0x13010	/* SODIMM 73 */
 		>;
 	};
 
-	pinctrl_enet2: enet2-grp {
+	pinctrl_enet2: enet2grp {
 		fsl,pins = <
 			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
 			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
@@ -235,7 +354,7 @@
 		>;
 	};
 
-	pinctrl_enet2_sleep: enet2sleepgrp {
+	pinctrl_enet2_sleep: enet2-sleepgrp {
 		fsl,pins = <
 			MX6UL_PAD_GPIO1_IO06__GPIO1_IO06	0x0
 			MX6UL_PAD_GPIO1_IO07__GPIO1_IO07	0x0
@@ -250,13 +369,13 @@
 		>;
 	};
 
-	pinctrl_ecspi1_cs: ecspi1-cs-grp {
+	pinctrl_ecspi1_cs: ecspi1csgrp {
 		fsl,pins = <
 			MX6UL_PAD_LCD_DATA21__GPIO3_IO26	0x70a0	/* SODIMM 86 */
 		>;
 	};
 
-	pinctrl_ecspi1: ecspi1-grp {
+	pinctrl_ecspi1: ecspi1grp {
 		fsl,pins = <
 			MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK	0x000a0	/* SODIMM 88 */
 			MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI	0x000a0 /* SODIMM 92 */
@@ -264,27 +383,27 @@
 		>;
 	};
 
-	pinctrl_flexcan1: flexcan1-grp {
+	pinctrl_flexcan1: flexcan1grp {
 		fsl,pins = <
 			MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX	0x1b020
 			MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX	0x1b020
 		>;
 	};
 
-	pinctrl_flexcan2: flexcan2-grp {
+	pinctrl_flexcan2: flexcan2grp {
 		fsl,pins = <
 			MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX	0x1b020
 			MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX	0x1b020
 		>;
 	};
 
-	pinctrl_gpio_bl_on: gpio-bl-on-grp {
+	pinctrl_gpio_bl_on: gpioblongrp {
 		fsl,pins = <
 			MX6UL_PAD_JTAG_TMS__GPIO1_IO11		0x30a0	/* SODIMM 71 */
 		>;
 	};
 
-	pinctrl_gpio1: gpio1-grp {
+	pinctrl_gpio1: gpio1grp {
 		fsl,pins = <
 			MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25	0x10b0 /* SODIMM 77 */
 			MX6UL_PAD_JTAG_TCK__GPIO1_IO14		0x70a0 /* SODIMM 99 */
@@ -297,7 +416,7 @@
 		>;
 	};
 
-	pinctrl_gpio2: gpio2-grp { /* Camera */
+	pinctrl_gpio2: gpio2grp { /* Camera */
 		fsl,pins = <
 			MX6UL_PAD_CSI_DATA04__GPIO4_IO25	0x10b0 /* SODIMM 69 */
 			MX6UL_PAD_CSI_MCLK__GPIO4_IO17		0x10b0 /* SODIMM 75 */
@@ -307,26 +426,20 @@
 		>;
 	};
 
-	pinctrl_gpio3: gpio3-grp { /* CAN2 */
+	pinctrl_gpio3: gpio3grp { /* CAN2 */
 		fsl,pins = <
 			MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02	0x10b0 /* SODIMM 178 */
 			MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03	0x10b0 /* SODIMM 188 */
 		>;
 	};
 
-	pinctrl_gpio4: gpio4-grp {
+	pinctrl_gpio4: gpio4grp {
 		fsl,pins = <
 			MX6UL_PAD_CSI_DATA07__GPIO4_IO28	0x10b0 /* SODIMM 65 */
 		>;
 	};
 
-	pinctrl_gpio5: gpio5-grp { /* ATMEL MXT TOUCH */
-		fsl,pins = <
-			MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0xb0a0 /* SODIMM 106 */
-		>;
-	};
-
-	pinctrl_gpio6: gpio6-grp { /* Wifi pins */
+	pinctrl_gpio6: gpio6grp { /* Wifi pins */
 		fsl,pins = <
 			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0x10b0 /* SODIMM 89 */
 			MX6UL_PAD_CSI_DATA02__GPIO4_IO23	0x10b0 /* SODIMM 79 */
@@ -338,7 +451,7 @@
 		>;
 	};
 
-	pinctrl_gpio7: gpio7-grp { /* CAN1 */
+	pinctrl_gpio7: gpio7grp { /* CAN1 */
 		fsl,pins = <
 			MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00	0xb0b0/* SODIMM 55 */
 			MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01	0xb0b0 /* SODIMM 63 */
@@ -347,9 +460,9 @@
 
 	/*
 	 * With an eMMC instead of a raw NAND device the following pins
-	 * are available at SODIMM pins
+	 * are available at SODIMM pins.
 	 */
-	pinctrl_gpmi_gpio: gpmi-gpio-grp {
+	pinctrl_gpmi_gpio: gpmigpiogrp {
 		fsl,pins = <
 			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x10b0 /* SODIMM 140 */
 			MX6UL_PAD_NAND_CE0_B__GPIO4_IO13	0x10b0 /* SODIMM 144 */
@@ -358,7 +471,7 @@
 		>;
 	};
 
-	pinctrl_gpmi_nand: gpmi-nand-grp {
+	pinctrl_gpmi_nand: gpminandgrp {
 		fsl,pins = <
 			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0x100a9
 			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0x100a9
@@ -377,35 +490,35 @@
 		>;
 	};
 
-	pinctrl_i2c1: i2c1-grp {
+	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
 			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0	/* SODIMM 196 */
 			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0	/* SODIMM 194 */
 		>;
 	};
 
-	pinctrl_i2c1_gpio: i2c1-gpio-grp {
+	pinctrl_i2c1_gpio: i2c1-gpiogrp {
 		fsl,pins = <
 			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x4001b8b0	/* SODIMM 196 */
 			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x4001b8b0	/* SODIMM 194 */
 		>;
 	};
 
-	pinctrl_i2c2: i2c2-grp {
+	pinctrl_i2c2: i2c2grp {
 		fsl,pins = <
-			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
-			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001f8b0
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001f8b0
 		>;
 	};
 
-	pinctrl_i2c2_gpio: i2c2-gpio-grp {
+	pinctrl_i2c2_gpio: i2c2-gpiogrp {
 		fsl,pins = <
-			MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x4001b8b0
-			MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x4001b8b0
+			MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x4001f8b0
+			MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x4001f8b0
 		>;
 	};
 
-	pinctrl_lcdif_dat: lcdif-dat-grp {
+	pinctrl_lcdif_dat: lcdifdatgrp {
 		fsl,pins = <
 			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x00079	/* SODIMM 76 */
 			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x00079	/* SODIMM 70 */
@@ -428,7 +541,7 @@
 		>;
 	};
 
-	pinctrl_lcdif_ctrl: lcdif-ctrl-grp {
+	pinctrl_lcdif_ctrl: lcdifctrlgrp {
 		fsl,pins = <
 			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x00079	/* SODIMM 56 */
 			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x00079	/* SODIMM 44 */
@@ -437,31 +550,31 @@
 		>;
 	};
 
-	pinctrl_pwm4: pwm4-grp {
+	pinctrl_pwm4: pwm4grp {
 		fsl,pins = <
 			MX6UL_PAD_NAND_WP_B__PWM4_OUT	0x00079		/* SODIMM 59 */
 		>;
 	};
 
-	pinctrl_pwm5: pwm5-grp {
+	pinctrl_pwm5: pwm5grp {
 		fsl,pins = <
 			MX6UL_PAD_NAND_DQS__PWM5_OUT	0x00079		/* SODIMM 28 */
 		>;
 	};
 
-	pinctrl_pwm6: pwm6-grp {
+	pinctrl_pwm6: pwm6grp {
 		fsl,pins = <
 			MX6UL_PAD_ENET1_TX_EN__PWM6_OUT	0x00079		/* SODIMM 30 */
 		>;
 	};
 
-	pinctrl_pwm7: pwm7-grp {
+	pinctrl_pwm7: pwm7grp {
 		fsl,pins = <
 			MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT	0x00079	/* SODIMM 67 */
 		>;
 	};
 
-	pinctrl_uart1: uart1-grp {
+	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX	0x1b0b1	/* SODIMM 33 */
 			MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX	0x1b0b1	/* SODIMM 35 */
@@ -470,16 +583,16 @@
 		>;
 	};
 
-	pinctrl_uart1_ctrl1: uart1-ctrl1-grp { /* Additional DTR, DCD */
+	pinctrl_uart1_ctrl1: uart1ctrl1grp { /* Additional DTR, DCD */
 		fsl,pins = <
-			MX6UL_PAD_JTAG_TDI__GPIO1_IO13		0x70a0 /* SODIMM 31 */
-			MX6UL_PAD_LCD_DATA18__GPIO3_IO23	0x10b0 /* SODIMM 29 */
-			MX6UL_PAD_JTAG_TDO__GPIO1_IO12		0x90b1 /* SODIMM 23 */
-			MX6UL_PAD_LCD_DATA19__GPIO3_IO24        0x10b0 /* SODIMM 37 */
+			MX6UL_PAD_JTAG_TDI__GPIO1_IO13		0x70a0 /* SODIMM 31 / DCD */
+			MX6UL_PAD_LCD_DATA18__GPIO3_IO23	0x10b0 /* SODIMM 29 / DSR */
+			MX6UL_PAD_JTAG_TDO__GPIO1_IO12		0x90b1 /* SODIMM 23 / DTR */
+			MX6UL_PAD_LCD_DATA19__GPIO3_IO24        0x10b0 /* SODIMM 37 / RI */
 		>;
 	};
 
-	pinctrl_uart2: uart2-grp {
+	pinctrl_uart2: uart2grp {
 		fsl,pins = <
 			MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX	0x1b0b1 /* SODIMM 36 */
 			MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX	0x1b0b1 /* SODIMM 38 */
@@ -487,23 +600,23 @@
 			MX6UL_PAD_UART2_RTS_B__UART2_DTE_CTS	0x1b0b1 /* SODIMM 34 */
 		>;
 	};
-	pinctrl_uart5: uart5-grp {
+	pinctrl_uart5: uart5grp {
 		fsl,pins = <
 			MX6UL_PAD_GPIO1_IO04__UART5_DTE_RX	0x1b0b1 /* SODIMM 19 */
 			MX6UL_PAD_GPIO1_IO05__UART5_DTE_TX	0x1b0b1 /* SODIMM 21 */
 		>;
 	};
 
-	pinctrl_usbh_reg: gpio-usbh-reg {
+	pinctrl_usbh_reg: usbhreggrp {
 		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0x10b0 /* SODIMM 129 */
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0x10b0 /* SODIMM 129 / USBH_PEN */
 		>;
 	};
 
-	pinctrl_usdhc1: usdhc1-grp {
+	pinctrl_usdhc1: usdhc1grp {
 		fsl,pins = <
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x17059 /* SODIMM 47 */
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x10059 /* SODIMM 190 */
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059 /* SODIMM 47 */
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059 /* SODIMM 190 */
 			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059 /* SODIMM 192 */
 			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059 /* SODIMM 49 */
 			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059 /* SODIMM 51 */
@@ -511,10 +624,10 @@
 		>;
 	};
 
-	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
 		fsl,pins = <
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x170b9
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x100b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
 			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
 			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
 			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
@@ -522,25 +635,25 @@
 		>;
 	};
 
-	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
 		fsl,pins = <
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x170f9
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x100f9
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
 		>;
 	};
 
-	pinctrl_usdhc2: usdhc2-grp {
+	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <
 			MX6UL_PAD_CSI_DATA00__USDHC2_DATA0	0x17069
 			MX6UL_PAD_CSI_DATA01__USDHC2_DATA1	0x17069
 			MX6UL_PAD_CSI_DATA02__USDHC2_DATA2	0x17069
 			MX6UL_PAD_CSI_DATA03__USDHC2_DATA3	0x17069
 			MX6UL_PAD_CSI_HSYNC__USDHC2_CMD		0x17069
-			MX6UL_PAD_CSI_VSYNC__USDHC2_CLK		0x17069
+			MX6UL_PAD_CSI_VSYNC__USDHC2_CLK		0x10069
 
 			MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT	0x10
 		>;
@@ -561,7 +674,7 @@
 		>;
 	};
 
-	pinctrl_wdog: wdog-grp {
+	pinctrl_wdog: wdoggrp {
 		fsl,pins = <
 			MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY    0x30b0
 		>;
@@ -569,65 +682,65 @@
 };
 
 &iomuxc_snvs {
-	pinctrl_snvs_gpio1: snvs-gpio1-grp {
+	pinctrl_atmel_snvs_conn: atmelsnvsconngrp {
 		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x110a0	/* SODIMM 93 */
-			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x110a0	/* SODIMM 95 */
-			MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10	0x1b0a0	/* SODIMM 105 */
-			MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x0b0a0	/* SODIMM 131 */
-			MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x110a0	/* SODIMM 138 */
+			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04     0xb0a0	/* SODIMM 107 */
 		>;
 	};
 
-	pinctrl_snvs_gpio2: snvs-gpio2-grp { /* ATMEL MXT TOUCH */
+	pinctrl_snvs_gpio1: snvsgpio1grp {
 		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04	0xb0a0	/* SODIMM 107 */
+			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x110a0	/* SODIMM 93 */
+			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x110a0	/* SODIMM 95 */
+			MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10	0x1b0a0	/* SODIMM 105 */
+			MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x0b0a0	/* SODIMM 131 / USBH_OC */
+			MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x110a0	/* SODIMM 138 */
 		>;
 	};
 
-	pinctrl_snvs_gpio3: snvs-gpio3-grp { /* Wifi pins */
+	pinctrl_snvs_gpio3: snvsgpio3grp { /* Wifi pins */
 		fsl,pins = <
 			MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11	0x130a0	/* SODIMM 127 */
 		>;
 	};
 
-	pinctrl_snvs_ad7879_int: snvs-ad7879-int-grp { /* TOUCH Interrupt */
+	pinctrl_snvs_ad7879_int: snvsad7879intgrp { /* TOUCH Interrupt */
 		fsl,pins = <
 			MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x100b0
 		>;
 	};
 
-	pinctrl_snvs_reg_sd: snvs-reg-sd-grp {
+	pinctrl_snvs_reg_sd: snvsregsdgrp {
 		fsl,pins = <
 			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x400100b0
 		>;
 	};
 
-	pinctrl_snvs_usbc_det: snvs-usbc-det-grp {
+	pinctrl_snvs_usbc_det: snvsusbcdetgrp {
 		fsl,pins = <
 			MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x130b0
 		>;
 	};
 
-	pinctrl_snvs_gpiokeys: snvs-gpiokeys-grp {
+	pinctrl_snvs_gpiokeys: snvsgpiokeysgrp {
 		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x130a0	/* SODIMM 45 */
+			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x130a0	/* SODIMM 45 / WAKE_UP */
 		>;
 	};
 
-	pinctrl_snvs_usdhc1_cd: snvs-usdhc1-cd-grp {
+	pinctrl_snvs_usdhc1_cd: snvsusdhc1cdgrp {
 		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x1b0a0 /* SODIMM 43 */
+			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x1b0a0 /* SODIMM 43 / MMC_CD */
 		>;
 	};
 
-	pinctrl_snvs_usdhc1_sleep_cd: snvs-usdhc1-cd-grp-slp {
+	pinctrl_snvs_usdhc1_cd_sleep: snvsusdhc1cd-sleepgrp {
 		fsl,pins = <
 			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x0
 		>;
 	};
 
-	pinctrl_snvs_wifi_pdn: snvs-wifi-pdn-grp {
+	pinctrl_snvs_wifi_pdn: snvswifipdngrp {
 		fsl,pins = <
 			MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11	0x130a0
 		>;
diff --git a/arch/arm/boot/dts/imx6ull-kontron-bl.dts b/arch/arm/boot/dts/imx6ull-kontron-bl.dts
new file mode 100644
index 000000000000..fa016465cdbc
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-kontron-bl.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2019 Kontron Electronics GmbH
+ */
+
+/dts-v1/;
+
+#include "imx6ull-kontron-sl.dtsi"
+#include "imx6ul-kontron-bl-common.dtsi"
+
+/ {
+	model = "Kontron BL i.MX6ULL (N641X S)";
+	compatible = "kontron,bl-imx6ull", "kontron,sl-imx6ull", "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/imx6ull-kontron-n6411-s.dts b/arch/arm/boot/dts/imx6ull-kontron-n6411-s.dts
deleted file mode 100644
index 57588a5e1e34..000000000000
--- a/arch/arm/boot/dts/imx6ull-kontron-n6411-s.dts
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 exceet electronics GmbH
- * Copyright (C) 2019 Kontron Electronics GmbH
- */
-
-/dts-v1/;
-
-#include "imx6ull-kontron-n6411-som.dtsi"
-#include "imx6ul-kontron-n6x1x-s.dtsi"
-
-/ {
-	model = "Kontron N6411 S";
-	compatible = "kontron,imx6ull-n6411-s", "kontron,imx6ull-n6411-som",
-		     "fsl,imx6ull";
-};
diff --git a/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi b/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi
deleted file mode 100644
index b7e984284e1a..000000000000
--- a/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi
+++ /dev/null
@@ -1,40 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 exceet electronics GmbH
- * Copyright (C) 2018 Kontron Electronics GmbH
- */
-
-#include "imx6ull.dtsi"
-#include "imx6ul-kontron-n6x1x-som-common.dtsi"
-
-/ {
-	model = "Kontron N6411 SOM";
-	compatible = "kontron,imx6ull-n6311-som", "fsl,imx6ull";
-
-	memory@80000000 {
-		reg = <0x80000000 0x20000000>;
-		device_type = "memory";
-	};
-};
-
-&qspi {
-	spi-flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spi-nand";
-		spi-max-frequency = <104000000>;
-		spi-tx-bus-width = <4>;
-		spi-rx-bus-width = <4>;
-		reg = <0>;
-
-		partition@0 {
-			label = "ubi1";
-			reg = <0x00000000 0x08000000>;
-		};
-
-		partition@8000000 {
-			label = "ubi2";
-			reg = <0x08000000 0x18000000>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ull-kontron-sl.dtsi b/arch/arm/boot/dts/imx6ull-kontron-sl.dtsi
new file mode 100644
index 000000000000..93f10eb3494f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-kontron-sl.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ */
+
+#include "imx6ull.dtsi"
+#include "imx6ul-kontron-sl-common.dtsi"
+
+/ {
+	model = "Kontron SL i.MX6ULL (N641X SOM)";
+	compatible = "kontron,sl-imx6ull", "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/imx6ull-phytec-tauri-emmc.dts b/arch/arm/boot/dts/imx6ull-phytec-tauri-emmc.dts
new file mode 100644
index 000000000000..14adb87da911
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-phytec-tauri-emmc.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2021 PHYTEC Messtechnik GmbH
+ * Author: Alexander Bauer <a.bauer@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6ull-phytec-tauri.dtsi"
+
+/ {
+	model = "PHYTEC phyGate-Tauri i.MX6 UltraLite";
+	compatible = "phytec,imx6ull-phygate-tauri",
+		     "phytec,imx6ull-phygate-tauri-emmc",
+		     "phytec,imx6ull-pcl063", "fsl,imx6ull";
+};
+
+/* EMMC-Version */
+&usdhc2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-phytec-tauri-nand.dts b/arch/arm/boot/dts/imx6ull-phytec-tauri-nand.dts
new file mode 100644
index 000000000000..ae396ac63443
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-phytec-tauri-nand.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2021 PHYTEC Messtechnik GmbH
+ * Author: Alexander Bauer <a.bauer@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6ull-phytec-tauri.dtsi"
+
+/ {
+	model = "PHYTEC phyGate-Tauri i.MX6 UltraLite";
+	compatible = "phytec,imx6ull-phygate-tauri",
+		     "phytec,imx6ull-phygate-tauri-nand",
+		     "phytec,imx6ull-pcl063", "fsl,imx6ull";
+};
+
+/* NAND-Version */
+&gpmi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-phytec-tauri.dtsi b/arch/arm/boot/dts/imx6ull-phytec-tauri.dtsi
new file mode 100644
index 000000000000..5464a52a1f94
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-phytec-tauri.dtsi
@@ -0,0 +1,588 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2021 PHYTEC Messtechnik GmbH
+ * Author: Alexander Bauer <a.bauer@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6ull.dtsi"
+#include "imx6ull-phytec-phycore-som.dtsi"
+
+/ {
+
+	model = "PHYTEC phyGate-Tauri i.MX6 UltraLite";
+	compatible = "phytec,imx6ull-phygate-tauri",
+		     "phytec,imx6ull-pcl063", "fsl,imx6ull";
+
+	aliases {
+		rtc0 = &i2c_rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-key";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key {
+			label = "KEY-A";
+			gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_A>;
+			wakeup-source;
+		};
+	};
+
+	reg_adc1_vref_3v3: regulator-vref-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_s25fl064_hold: regulator-s25fl064-hold {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_s25fl064_hold>;
+		compatible = "regulator-fixed";
+		regulator-name = "s25fl064_hold";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_usb_hub_vbus: regulator-hub-otg1-vbus {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbhubpwr>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_hub_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg1pwr>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	user_leds: user-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_user_leds>,
+			    <&pinctrl_user_leds_snvs>;
+
+		user-led1 {
+			label = "yellow";
+			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "off";
+		};
+
+		user-led2 {
+			label = "red";
+			gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "off";
+		};
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&ecspi1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>,
+		    <&pinctrl_ecspi1_cs>;
+	cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>,
+		   <&gpio3 10 GPIO_ACTIVE_LOW>,
+		   <&gpio3 11 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm_tis: tpm@1 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpm>;
+		compatible = "tcg,tpm_tis-spi";
+		reg = <1>;
+		spi-max-frequency = <20000000>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	s25fl064: flash@2 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = " jedec,spi-nor";
+		reg = <2>;
+		spi-max-frequency = <40000000>;
+		m25p,fast-read;
+		status = "disabled";
+	};
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	cs-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+	dmas = <&sdma 7 8 0>,
+	       <&sdma 8 8 0>;
+	dma-names = "rx", "tx";
+	status = "okay";
+};
+
+&ethphy1 {
+	status = "okay";
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy2>;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	tmp102: tmp@49 {
+		compatible = "ti,tmp102";
+		reg = <0x49>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tempsense>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		#thermal-sensor-cells = <1>;
+	};
+
+	i2c_rtc: rtc@68 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc_int>;
+		compatible = "microcrystal,rv4162";
+		reg = <0x68>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	sda-gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio1 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	sda-gpios = <&gpio3 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	sda-gpios = <&gpio3 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio3 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&mdio {
+	ethphy2: ethernet-phy@2 {
+		reg = <2>;
+		micrel,led-mode = <1>;
+		clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+		clock-names = "rmii-ref";
+		status = "okay";
+	};
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm6>;
+	status = "okay";
+};
+
+&pwm7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm7>;
+	status = "okay";
+};
+
+&pwm8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm8>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+/* UART4 * RS485  */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	rts-gpios = <&gpio3 2 GPIO_ACTIVE_HIGH>;
+	rs485-rts-active-high;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+/* UART5 * RS232  */
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart7>;
+	status = "okay";
+};
+
+/* USB */
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1>;
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_hub_vbus>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
+
+&usdhc2 {
+	status = "disabled";
+};
+
+&iomuxc_snvs {
+	pinctrl_rtc_int: rtcintgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x17059
+		>;
+	};
+
+	pinctrl_stmpe: stmpegrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x17059
+		>;
+	};
+
+	pinctrl_tempsense: tempsensegrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x17059
+		>;
+	};
+
+	pinctrl_tpm: tpmgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x17059
+		>;
+	};
+
+	pinctrl_usbhubpwr: usbhubpwrgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x17059
+		>;
+	};
+
+	pinctrl_user_leds_snvs: user_ledsgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x79
+		>;
+	};
+};
+
+&iomuxc {
+	pinctrl_gpio: gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA05__GPIO4_IO26	0x17059  /* nUART_MUX_RS232 */
+			MX6UL_PAD_CSI_DATA04__GPIO4_IO25	0x17059  /* nUART_MUX_DUAL_RX_TX */
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x79
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK	0x100b1
+			MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO	0x100b1
+			MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI	0x100b1
+			MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20	0x10b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK	0x100b1
+			MX6UL_PAD_LCD_DATA23__ECSPI1_MISO	0x100b1
+			MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI	0x100b1
+		>;
+	};
+
+	pinctrl_ecspi1_cs: ecspi1csgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA21__GPIO3_IO26	0x10b0
+			MX6UL_PAD_LCD_DATA05__GPIO3_IO10	0x10b0
+			MX6UL_PAD_LCD_DATA06__GPIO3_IO11	0x10b0
+		>;
+	};
+
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b010
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b010
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b010
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b010
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x0b0b0
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA10__FLEXCAN2_TX	0x0b0b0
+			MX6UL_PAD_LCD_DATA11__FLEXCAN2_RX	0x0b0b0
+		>;
+	};
+
+	princtrl_flexcan2_en: flexcan2engrp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x17059
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__I2C2_SCL	0xb0
+			MX6UL_PAD_GPIO1_IO01__I2C2_SDA	0xb0
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__GPIO1_IO00	0xb0
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0xb0
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA01__I2C3_SCL	0xb0
+			MX6UL_PAD_LCD_DATA00__I2C3_SDA	0xb0
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA01__GPIO3_IO06	0xb0
+			MX6UL_PAD_LCD_DATA00__GPIO3_IO05	0xb0
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA03__I2C4_SCL	0xb0
+			MX6UL_PAD_LCD_DATA02__I2C4_SDA	0xb0
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA03__GPIO3_IO08	0xb0
+			MX6UL_PAD_LCD_DATA02__GPIO3_IO07	0xb0
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO04__PWM3_OUT	0x0b0b0
+		>;
+	};
+
+	pinctrl_pwm6: pwm6grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TDI__PWM6_OUT	0x0b0b0
+		>;
+	};
+
+	pinctrl_pwm7: pwm7grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TCK__PWM7_OUT	0x0b0b0
+		>;
+	};
+
+	pinctrl_pwm8: pwm8grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TRST_B__PWM8_OUT	0x0b0b0
+		>;
+	};
+
+	pinctrl_s25fl064_hold: s25fl064holdgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA12__GPIO3_IO17	0x100b1
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
+			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
+			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x11088
+			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x11088
+			MX6UL_PAD_JTAG_TMS__SAI2_MCLK		0x17088
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__UART4_DCE_TX		0x1b0b1
+			MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX	0x1b0b1
+			MX6UL_PAD_LCD_HSYNC__GPIO3_IO02	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart7: uart7grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA16__UART7_DCE_TX	0x1b0b1
+			MX6UL_PAD_LCD_DATA17__UART7_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usb_otg1: usbotg1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA06__GPIO4_IO27	0x80
+		>;
+	};
+
+	pinctrl_usbotg1pwr: usbotg1pwrgrp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA07__GPIO4_IO28	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_user_leds: userledsgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0x79
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ull-tqma6ull2-mba6ulx.dts b/arch/arm/boot/dts/imx6ull-tqma6ull2-mba6ulx.dts
new file mode 100644
index 000000000000..e593b7036fc7
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-tqma6ull2-mba6ulx.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include "imx6ull-tqma6ull2.dtsi"
+#include "mba6ulx.dtsi"
+
+/ {
+	model = "TQ-Systems TQMa6ULL2 SoM on MBa6ULx board";
+	compatible = "tq,imx6ull-tqma6ull2-mba6ulx", "tq,imx6ull-tqma6ull2", "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/imx6ull-tqma6ull2.dtsi b/arch/arm/boot/dts/imx6ull-tqma6ull2.dtsi
new file mode 100644
index 000000000000..8541cb3f3b3e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-tqma6ull2.dtsi
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include "imx6ull.dtsi"
+#include "imx6ul-tqma6ul-common.dtsi"
+#include "imx6ul-tqma6ulx-common.dtsi"
+
+/ {
+	model = "TQ-Systems TQMa6ULL2 SoM";
+	compatible = "tq,imx6ull-tqma6ull2", "fsl,imx6ull";
+};
+
+&usdhc2 {
+	fsl,tuning-step = <6>;
+	/* Errata ERR010450 Workaround */
+	max-frequency = <99000000>;
+	assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
+	assigned-clock-rates = <0>, <198000000>;
+};
+
+&iomuxc {
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x00017031
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x00017039
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x00017039
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x00017039
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x00017039
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x00017039
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x00017039
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x00017039
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x00017039
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x00017039
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x000170f1
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x000170f1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x000170f1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x000170f1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x000170f1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x000170f1
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x000170f1
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x000170f1
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x000170f1
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x000170f1
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x000170f1
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x000170f1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x000170f1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x000170f1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x000170f1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x000170f1
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x000170f1
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x000170f1
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x000170f1
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x000170f1
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ull-tqma6ull2l-mba6ulx.dts b/arch/arm/boot/dts/imx6ull-tqma6ull2l-mba6ulx.dts
new file mode 100644
index 000000000000..33437aae9822
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-tqma6ull2l-mba6ulx.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include "imx6ull-tqma6ull2l.dtsi"
+#include "mba6ulx.dtsi"
+
+/ {
+	model = "TQ Systems TQMa6ULL2L SoM on MBa6ULx board";
+	compatible = "tq,imx6ull-tqma6ull2l-mba6ulx", "tq,imx6ull-tqma6ull2l", "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/imx6ull-tqma6ull2l.dtsi b/arch/arm/boot/dts/imx6ull-tqma6ull2l.dtsi
new file mode 100644
index 000000000000..be593d47e3b1
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-tqma6ull2l.dtsi
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include "imx6ull.dtsi"
+#include "imx6ul-tqma6ul-common.dtsi"
+#include "imx6ul-tqma6ulxl-common.dtsi"
+
+/ {
+	model = "TQ Systems TQMa6ULL2L SoM";
+	compatible = "tq,imx6ull-tqma6ull2l", "fsl,imx6ull";
+};
+
+&usdhc2 {
+	fsl,tuning-step = <6>;
+	/* Errata ERR010450 Workaround */
+	max-frequency = <99000000>;
+	assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
+	assigned-clock-rates = <0>, <198000000>;
+};
+
+&iomuxc {
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x00017031
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x00017039
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x00017039
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x00017039
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x00017039
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x00017039
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x00017039
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x00017039
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x00017039
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x00017039
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x000170f1
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x000170f1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x000170f1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x000170f1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x000170f1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x000170f1
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x000170f1
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x000170f1
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x000170f1
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x000170f1
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x000170f1
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x000170f1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x000170f1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x000170f1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x000170f1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x000170f1
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x000170f1
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x000170f1
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x000170f1
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x000170f1
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi
index 9bf67490ac49..2bccd45e9fc2 100644
--- a/arch/arm/boot/dts/imx6ull.dtsi
+++ b/arch/arm/boot/dts/imx6ull.dtsi
@@ -50,7 +50,7 @@
 };
 
 / {
-	soc {
+	soc: soc {
 		aips3: bus@2200000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/imx6ulz-bsh-smm-m2.dts b/arch/arm/boot/dts/imx6ulz-bsh-smm-m2.dts
index 59bcfc9a6b10..c92e4e2f6ab9 100644
--- a/arch/arm/boot/dts/imx6ulz-bsh-smm-m2.dts
+++ b/arch/arm/boot/dts/imx6ulz-bsh-smm-m2.dts
@@ -29,6 +29,10 @@
 	status = "okay";
 };
 
+&snvs_poweroff {
+	status = "okay";
+};
+
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
diff --git a/arch/arm/boot/dts/imx7-colibri-aster.dtsi b/arch/arm/boot/dts/imx7-colibri-aster.dtsi
index 139188eb9f40..fa488a6de0d4 100644
--- a/arch/arm/boot/dts/imx7-colibri-aster.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri-aster.dtsi
@@ -1,169 +1,79 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2017-2020 Toradex AG
- *
+ * Copyright 2017-2022 Toradex
  */
 
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpiokeys>;
-
-		power {
-			label = "Wake-Up";
-			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_WAKEUP>;
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-	};
-
-	panel: panel {
-		compatible = "edt,et057090dhu";
-		backlight = <&bl>;
-		power-supply = <&reg_3v3>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lcdif_out>;
-			};
-		};
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_5v0: regulator-5v0 {
-		compatible = "regulator-fixed";
-		regulator-name = "5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_usbh_vbus: regulator-usbh-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbh_reg>;
-		regulator-name = "VCC_USB[1-4]";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio4 7 GPIO_ACTIVE_LOW>;
-		vin-supply = <&reg_5v0>;
-	};
-};
-
+/* Colibri AD0 to AD3 */
 &adc1 {
 	status = "okay";
 };
 
-/*
- * ADC2 is not available on the Aster board and
- * conflicts with AD7879 resistive touchscreen.
- */
-&adc2 {
-	status = "disabled";
-};
-
-&bl {
-	brightness-levels = <0 4 8 16 32 64 128 255>;
-	default-brightness-level = <6>;
-	power-supply = <&reg_3v3>;
+/* Colibri SSP */
+&ecspi3 {
+	cs-gpios = <
+		&gpio4 11 GPIO_ACTIVE_LOW /* SODIMM 86 / regular SSPFRM as UNO_SPI_CS or  */
+		&gpio4 23 GPIO_ACTIVE_LOW /* SODIMM 65 / already muxed pinctrl_gpio2 as SPI_CE0_N */
+		&gpio4 22 GPIO_ACTIVE_LOW /* SODIMM 85 / already muxed pinctrl_gpio2 as SPI_CE1_N */
+	>;
 	status = "okay";
 };
 
+/* Colibri Fast Ethernet */
 &fec1 {
 	status = "okay";
 };
 
+/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */
 &i2c4 {
 	status = "okay";
-
-	/* Microchip/Atmel maxtouch controller */
-	touchscreen@4a {
-		compatible = "atmel,maxtouch";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpiotouch>;
-		reg = <0x4a>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;	/* SODIMM 107 */
-		reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;	/* SODIMM 106 */
-	};
-
-	/* M41T0M6 real time clock on carrier board */
-	rtc: m41t0m6@68 {
-		compatible = "st,m41t0";
-		reg = <0x68>;
-	};
-};
-
-&iomuxc {
-	pinctrl_gpiotouch: touchgpios {
-		fsl,pins = <
-			MX7D_PAD_EPDC_DATA15__GPIO2_IO15        0x74
-			MX7D_PAD_EPDC_BDR0__GPIO2_IO28          0x14
-		>;
-	};
-};
-
-&lcdif {
-	status = "okay";
-
-	port {
-		lcdif_out: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
 };
 
+/* Colibri PWM<A> */
 &pwm1 {
 	status = "okay";
 };
 
+/* Colibri PWM<B> */
 &pwm2 {
 	status = "okay";
 };
 
+/* Colibri PWM<C> */
 &pwm3 {
 	status = "okay";
 };
 
+/* Colibri PWM<D> */
 &pwm4 {
 	status = "okay";
 };
 
+/* M41T0M6 real time clock */
+&rtc {
+	status = "okay";
+};
+
+/* Colibri UART_A */
 &uart1 {
 	status = "okay";
 };
 
+/* Colibri UART_B */
 &uart2 {
 	status = "okay";
 };
 
+/* Colibri UART_C */
 &uart3 {
 	status = "okay";
 };
 
+/* Colibri USBC */
 &usbotg1 {
 	status = "okay";
 };
 
+/* Colibri MMC/SD */
 &usdhc1 {
-	keep-power-in-suspend;
-	no-1-8-v;
-	wakeup-source;
-	vmmc-supply = <&reg_3v3>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
index 3caf450735d7..826f13da5b81 100644
--- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
@@ -1,194 +1,110 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2016-2020 Toradex
+ * Copyright 2016-2022 Toradex
  */
 
 / {
-	aliases {
-		rtc0 = &rtc;
-		rtc1 = &snvs_rtc;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	/* fixed crystal dedicated to mpc258x */
+	/* Fixed crystal dedicated to MCP2515. */
 	clk16m: clk16m {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <16000000>;
 	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpiokeys>;
-
-		power {
-			label = "Wake-Up";
-			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_WAKEUP>;
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-	};
-
-	panel: panel {
-		compatible = "edt,et057090dhu";
-		backlight = <&bl>;
-		power-supply = <&reg_3v3>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lcdif_out>;
-			};
-		};
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_5v0: regulator-5v0 {
-		compatible = "regulator-fixed";
-		regulator-name = "5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_usbh_vbus: regulator-usbh-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbh_reg>;
-		regulator-name = "VCC_USB[1-4]";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio4 7 GPIO_ACTIVE_LOW>;
-		vin-supply = <&reg_5v0>;
-	};
-};
-
-&bl {
-	brightness-levels = <0 4 8 16 32 64 128 255>;
-	default-brightness-level = <6>;
-	power-supply = <&reg_3v3>;
-
-	status = "okay";
 };
 
+/* Colibri AD0 to AD3 */
 &adc1 {
 	status = "okay";
 };
 
-&adc2 {
-	status = "okay";
+/*
+ * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3.
+ * So if you enable following capacitive touch controller, disable pwm2/pwm3 first.
+ */
+&atmel_mxt_ts {
+	interrupt-parent = <&gpio1>;
+	interrupts = <9 IRQ_TYPE_EDGE_FALLING>;		/* SODIMM 28 / INT */
+	pinctrl-0 = <&pinctrl_atmel_adapter>;
+	reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;	/* SODIMM 30 / RST */
+	status = "disabled";
 };
 
+/* Colibri SSP */
 &ecspi3 {
 	status = "okay";
 
 	mcp2515: can@0 {
+		clocks = <&clk16m>;
 		compatible = "microchip,mcp2515";
+		interrupt-parent = <&gpio5>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_can_int>;
 		reg = <0>;
-		clocks = <&clk16m>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
 		spi-max-frequency = <10000000>;
 		vdd-supply = <&reg_3v3>;
 		xceiver-supply = <&reg_5v0>;
-		status = "okay";
 	};
 };
 
+/* Colibri Fast Ethernet */
 &fec1 {
 	status = "okay";
 };
 
+/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */
 &i2c4 {
 	status = "okay";
-
-	/*
-	 * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>,
-	 * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms
-	 */
-	touchscreen@4a {
-		compatible = "atmel,maxtouch";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpiotouch>;
-		reg = <0x4a>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;		/* SODIMM 28 */
-		reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;	/* SODIMM 30 */
-		status = "disabled";
-	};
-
-	/* M41T0M6 real time clock on carrier board */
-	rtc: m41t0m6@68 {
-		compatible = "st,m41t0";
-		reg = <0x68>;
-	};
-};
-
-&lcdif {
-	status = "okay";
-
-	port {
-		lcdif_out: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
 };
 
+/* Colibri PWM<A> */
 &pwm1 {
 	status = "okay";
 };
 
+/* Colibri PWM<B> */
 &pwm2 {
+	/* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
 	status = "okay";
 };
 
+/* Colibri PWM<C> */
 &pwm3 {
+	/* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
 	status = "okay";
 };
 
+/* Colibri PWM<D> */
 &pwm4 {
 	status = "okay";
 };
 
+/* M41T0M6 real time clock */
+&rtc {
+	status = "okay";
+};
+
+/* Colibri UART_A */
 &uart1 {
 	status = "okay";
 };
 
+/* Colibri UART_B */
 &uart2 {
 	status = "okay";
 };
 
+/* Colibri UART_C */
 &uart3 {
 	status = "okay";
 };
 
+/* Colibri USBC */
 &usbotg1 {
 	status = "okay";
 };
 
+/* Colibri MMC/SD */
 &usdhc1 {
-	keep-power-in-suspend;
-	wakeup-source;
-	vmmc-supply = <&reg_3v3>;
 	status = "okay";
 };
-
-&iomuxc {
-	pinctrl_gpiotouch: touchgpios {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO09__GPIO1_IO9		0x74
-			MX7D_PAD_GPIO1_IO10__GPIO1_IO10		0x14
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx7-colibri-iris-v2.dtsi b/arch/arm/boot/dts/imx7-colibri-iris-v2.dtsi
new file mode 100644
index 000000000000..6e199613583c
--- /dev/null
+++ b/arch/arm/boot/dts/imx7-colibri-iris-v2.dtsi
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/ {
+	reg_3v3_vmmc: regulator-3v3-vmmc {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* SODIMM 100 */
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3v3_vmmc";
+		startup-delay-us = <100>;
+	};
+};
+
+/* Colibri AD0 to AD3 */
+&adc1 {
+	status = "okay";
+};
+
+/* Colibri SSP */
+&ecspi3 {
+	status = "okay";
+};
+
+/* Colibri Fast Ethernet */
+&fec1 {
+	status = "okay";
+};
+
+&gpio2 {
+	/*
+	 * uart_b_c_on_x14_enable turns the UART transceiver for UART2 and 5 on. If one wants to
+	 * turn the transceiver off, that property has to be deleted and the gpio handled in
+	 * userspace.
+	 * The same applies to uart_a_on_x13_enable where the UART_A transceiver is turned on.
+	 */
+	uart-b-c-on-x14-enable-hog {
+		gpio-hog;
+		gpios = <27 GPIO_ACTIVE_HIGH>; /* SODIMM 104 */
+		output-high;
+	};
+};
+
+&gpio5 {
+	uart-a-on-x13-enable-hog {
+		gpio-hog;
+		gpios = <17 GPIO_ACTIVE_HIGH>; /* SODIMM 102 */
+		output-high;
+	};
+};
+
+/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */
+&i2c4 {
+	status = "okay";
+};
+
+/* Colibri PWM<A> */
+&pwm1 {
+	status = "okay";
+};
+
+/* Colibri PWM<B> */
+&pwm2 {
+	status = "okay";
+};
+
+/* Colibri PWM<C> */
+&pwm3 {
+	status = "okay";
+};
+
+/* Colibri PWM<D> */
+&pwm4 {
+	status = "okay";
+};
+
+/* M41T0M6 real time clock */
+&rtc {
+	status = "okay";
+};
+
+/* Colibri UART_A */
+&uart1 {
+	status = "okay";
+};
+
+/* Colibri UART_B */
+&uart2 {
+	status = "okay";
+};
+
+/* Colibri UART_C */
+&uart3 {
+	status = "okay";
+};
+
+/* Colibri USBC */
+&usbotg1 {
+	status = "okay";
+};
+
+/* Colibri MMC/SD, UHS-I capable uSD slot */
+&usdhc1 {
+	cap-power-off-card;
+	/delete-property/ keep-power-in-suspend;
+	/delete-property/ no-1-8-v;
+	vmmc-supply = <&reg_3v3_vmmc>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7-colibri-iris.dtsi b/arch/arm/boot/dts/imx7-colibri-iris.dtsi
new file mode 100644
index 000000000000..175c5d478d2e
--- /dev/null
+++ b/arch/arm/boot/dts/imx7-colibri-iris.dtsi
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/* Colibri AD0 to AD3 */
+&adc1 {
+	status = "okay";
+};
+
+/*
+ * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3.
+ * So if you enable following capacitive touch controller, disable pwm2/pwm3 first.
+ */
+&atmel_mxt_ts {
+	interrupt-parent = <&gpio1>;
+	interrupts = <9 IRQ_TYPE_EDGE_FALLING>;		/* SODIMM 28 / INT */
+	pinctrl-0 = <&pinctrl_atmel_adapter>;
+	reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;	/* SODIMM 30 / RST */
+};
+
+/* Colibri SSP */
+&ecspi3 {
+	status = "okay";
+};
+
+/* Colibri Fast Ethernet */
+&fec1 {
+	status = "okay";
+};
+
+&gpio2 {
+	/*
+	 * uart25 turns the UART transceiver for UART2 and 5 on. If one wants to turn the
+	 * transceiver off, that property has to be deleted and the gpio handled in userspace.
+	 * The same applies to uart1_tx_on where the UART1 transceiver is turned on.
+	 */
+	uart25-tx-on-hog {
+		gpio-hog;
+		gpios = <27 GPIO_ACTIVE_HIGH>; /* SODIMM 104 */
+		output-high;
+	};
+};
+
+&gpio5 {
+	uart1-tx-on-hog {
+		gpio-hog;
+		gpios = <17 GPIO_ACTIVE_HIGH>; /* SODIMM 102 */
+		output-high;
+	};
+};
+
+/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */
+&i2c4 {
+	status = "okay";
+};
+
+/* Colibri PWM<A> */
+&pwm1 {
+	status = "okay";
+};
+
+/* Colibri PWM<B> */
+&pwm2 {
+	/* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+	status = "okay";
+};
+
+/* Colibri PWM<C> */
+&pwm3 {
+	/* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+	status = "okay";
+};
+
+/* Colibri PWM<D> */
+&pwm4 {
+	status = "okay";
+};
+
+/* M41T0M6 real time clock */
+&rtc {
+	status = "okay";
+};
+
+/* Colibri UART_A */
+&uart1 {
+	status = "okay";
+};
+
+/* Colibri UART_B */
+&uart2 {
+	status = "okay";
+};
+
+/* Colibri UART_C */
+&uart3 {
+	status = "okay";
+};
+
+/* Colibri USBC */
+&usbotg1 {
+	status = "okay";
+};
+
+/* Colibri MMC/SD */
+&usdhc1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index 62b771c1d5a9..a8c31ee65623 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -1,96 +1,198 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2016-2020 Toradex
+ * Copyright 2016-2022 Toradex
  */
 
+#include <dt-bindings/pwm/pwm.h>
+
 / {
-	bl: backlight {
+	aliases {
+		rtc0 = &rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	backlight: backlight {
+		brightness-levels = <0 45 63 88 119 158 203 255>;
 		compatible = "pwm-backlight";
+		default-brightness-level = <4>;
+		enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_bl_on>;
-		pwms = <&pwm1 0 5000000 0>;
-		enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_module_3v3>;
+		pwms = <&pwm1 0 6666667 PWM_POLARITY_INVERTED>;
+		status = "disabled";
 	};
 
-	reg_module_3v3: regulator-module-3v3 {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	extcon_usbc_det: usbc-det {
+		compatible = "linux,extcon-usb-gpio";
+		debounce = <25>;
+		id-gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; /* SODIMM 137 / USBC_DET */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbc_det>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys>;
+
+		wakeup {
+			debounce-interval = <10>;
+			gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* SODIMM 45 */
+			label = "Wake-Up";
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	panel_dpi: panel-dpi {
+		backlight = <&backlight>;
+		compatible = "edt,et057090dhu";
+		power-supply = <&reg_3v3>;
+		status = "disabled";
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcdif_out>;
+			};
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
-		regulator-name = "+V3.3";
-		regulator-min-microvolt = <3300000>;
+		regulator-always-on;
 		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3.3V";
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
 		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "5V";
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3";
 	};
 
 	reg_module_3v3_avdd: regulator-module-3v3-avdd {
 		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
 		regulator-name = "+V3.3_AVDD_AUDIO";
+	};
+
+	reg_module_3v3_eth: regulator-module-3v3-eth {
+		compatible = "regulator-fixed";
+		off-on-delay-us = <200000>;
+		regulator-name = "+V3.3_ETH";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
+		regulator-boot-on;
+		startup-delay-us = <200000>;
+		vin-supply = <&reg_LDO1>;
+	};
+
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		gpio = <&gpio4 7 GPIO_ACTIVE_LOW>; /* SODIMM 129 / USBH_PEN */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh_reg>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "VCC_USB[1-4]";
+		vin-supply = <&reg_5v0>;
 	};
 
 	sound {
 		compatible = "simple-audio-card";
-		simple-audio-card,name = "imx7-sgtl5000";
-		simple-audio-card,format = "i2s";
 		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,format = "i2s";
 		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,name = "imx7-sgtl5000";
+
 		simple-audio-card,cpu {
 			sound-dai = <&sai1>;
 		};
 
 		dailink_master: simple-audio-card,codec {
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 			sound-dai = <&codec>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
 		};
 	};
 };
 
+/* Colibri AD0 to AD3 */
 &adc1 {
 	vref-supply = <&reg_DCDC3>;
 };
 
-&adc2 {
-	vref-supply = <&reg_DCDC3>;
-};
+/* ADC2 is not available as it conflicts with AD7879 resistive touchscreen. */
 
 &cpu0 {
 	cpu-supply = <&reg_DCDC2>;
 };
 
+/* Colibri SSP */
 &ecspi3 {
+	cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* SODIMM 86 / SSPFRM */
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs>;
-	cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
 };
 
+/* Colibri Fast Ethernet */
 &fec1 {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&pinctrl_enet1>;
-	pinctrl-1 = <&pinctrl_enet1_sleep>;
-	clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
-		<&clks IMX7D_ENET_AXI_ROOT_CLK>,
-		<&clks IMX7D_ENET1_TIME_ROOT_CLK>,
-		<&clks IMX7D_PLL_ENET_MAIN_50M_CLK>;
-	clock-names = "ipg", "ahb", "ptp", "enet_clk_ref";
-	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
-			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
 	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
 	assigned-clock-rates = <0>, <100000000>;
-	phy-mode = "rmii";
-	phy-supply = <&reg_LDO1>;
+	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+	clock-names = "ipg", "ahb", "ptp", "enet_clk_ref";
+	clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+		 <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+		 <&clks IMX7D_ENET1_TIME_ROOT_CLK>,
+		 <&clks IMX7D_PLL_ENET_MAIN_50M_CLK>;
 	fsl,magic-packet;
+	phy-handle = <&ethphy0>;
+	phy-mode = "rmii";
+	phy-supply = <&reg_module_3v3_eth>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_enet1>;
+	pinctrl-1 = <&pinctrl_enet1_sleep>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Micrel KSZ8041RNL */
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			max-speed = <100>;
+			micrel,led-mode = <0>;
+			reg = <0>;
+		};
+	};
 };
 
 &flexcan1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "disabled";
 };
 
 &flexcan2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexcan2>;
-	status = "disabled";
 };
 
 &gpio1 {
@@ -271,14 +373,16 @@
 			  "SODIMM_137";
 };
 
+/* NAND on such SKUs */
 &gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
 	fsl,use-minimum-ecc;
-	nand-on-flash-bbt;
 	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
 };
 
+/* On-module Power I2C */
 &i2c1 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default", "gpio";
@@ -286,33 +390,33 @@
 	pinctrl-1 = <&pinctrl_i2c1_recovery &pinctrl_i2c1_int>;
 	scl-gpios = <&gpio1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-
 	status = "okay";
 
 	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
 		#sound-dai-cells = <0>;
-		reg = <0x0a>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
+		compatible = "fsl,sgtl5000";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_sai1_mclk>;
+		reg = <0xa>;
 		VDDA-supply = <&reg_module_3v3_avdd>;
-		VDDIO-supply = <&reg_module_3v3>;
 		VDDD-supply = <&reg_DCDC3>;
+		VDDIO-supply = <&reg_module_3v3>;
 	};
 
-	ad7879@2c {
+	ad7879_ts: touchscreen@2c {
+		adi,acquisition-time = /bits/ 8 <1>;
+		adi,averaging = /bits/ 8 <1>;
+		adi,conversion-interval = /bits/ 8 <255>;
+		adi,first-conversion-delay = /bits/ 8 <3>;
+		adi,median-filter-size = /bits/ 8 <2>;
+		adi,resistance-plate-x = <120>;
 		compatible = "adi,ad7879-1";
-		reg = <0x2c>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+		reg = <0x2c>;
 		touchscreen-max-pressure = <4096>;
-		adi,resistance-plate-x = <120>;
-		adi,first-conversion-delay = /bits/ 8 <3>;
-		adi,acquisition-time = /bits/ 8 <1>;
-		adi,median-filter-size = /bits/ 8 <2>;
-		adi,averaging = /bits/ 8 <1>;
-		adi,conversion-interval = /bits/ 8 <255>;
+		status = "disabled";
 	};
 
 	pmic@33 {
@@ -320,71 +424,81 @@
 		reg = <0x33>;
 
 		regulators {
-			reg_DCDC1: DCDC1 {  /* V1.0_SOC */
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-boot-on;
+			reg_DCDC1: DCDC1 {
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1100000>;
+				regulator-min-microvolt = <1000000>;
+				regulator-name = "+V1.0_SOC";
 			};
 
-			reg_DCDC2: DCDC2 { /* V1.1_ARM */
-				regulator-min-microvolt = <975000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-boot-on;
+			reg_DCDC2: DCDC2 {
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1100000>;
+				regulator-min-microvolt = <975000>;
+				regulator-name = "+V1.1_ARM";
 			};
 
-			reg_DCDC3: DCDC3 { /* V1.8 */
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
+			reg_DCDC3: DCDC3 {
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "+V1.8";
 			};
 
-			reg_DCDC4: DCDC4 { /* V1.35_DRAM */
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-boot-on;
+			reg_DCDC4: DCDC4 {
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1350000>;
+				regulator-min-microvolt = <1350000>;
+				regulator-name = "+V1.35_DRAM";
 			};
 
-			reg_LDO1: LDO1 { /* PWR_EN_+V3.3_ETH */
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
+			reg_LDO1: LDO1 {
 				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "PWR_EN_+V3.3_ETH";
 			};
 
-			reg_LDO2: LDO2 { /* +V1.8_SD */
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
+			reg_LDO2: LDO2 {
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "+V1.8_SD";
 			};
 
-			reg_LDO3: LDO3 { /* PWR_EN_+V3.3_LPSR */
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
+			reg_LDO3: LDO3 {
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "PWR_EN_+V3.3_LPSR";
 			};
 
-			reg_LDO4: LDO4 { /* V1.8_LPSR */
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
+			reg_LDO4: LDO4 {
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "+V1.8_LPSR";
 			};
 
-			reg_LDO5: LDO5 { /* PWR_EN_+V3.3 */
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
+			reg_LDO5: LDO5 {
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "PWR_EN_+V3.3";
 			};
 		};
 	};
 };
 
+/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */
 &i2c4 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default", "gpio";
@@ -392,36 +506,69 @@
 	pinctrl-1 = <&pinctrl_i2c4_recovery>;
 	scl-gpios = <&gpio7 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpio7 9 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "disabled";
+
+	/* Atmel maxtouch controller */
+	atmel_mxt_ts: touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		interrupt-parent = <&gpio2>;
+		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;        /* SODIMM 107 / INT */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_atmel_connector>;
+		reg = <0x4a>;
+		reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;      /* SODIMM 106 / RST */
+		status = "disabled";
+	};
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+		status = "disabled";
+	};
 };
 
 &lcdif {
+	assigned-clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_VIDEO_POST_DIV>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_lcdif_dat
 		     &pinctrl_lcdif_ctrl>;
+	status = "disabled";
+
+	port {
+		lcdif_out: endpoint {
+			remote-endpoint = <&lcd_panel_in>;
+		};
+	};
 };
 
+/* Colibri PWM<A> */
 &pwm1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 };
 
+/* Colibri PWM<B> */
 &pwm2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
 };
 
+/* Colibri PWM<C> */
 &pwm3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 };
 
+/* Colibri PWM<D> */
 &pwm4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 };
 
 &reg_1p0d {
-	vin-supply = <&reg_DCDC3>;
+	vin-supply = <&reg_DCDC3>; /* VDDA_1P8_IN */
 };
 
 &sai1 {
@@ -430,237 +577,257 @@
 	status = "okay";
 };
 
+/* Colibri UART_A */
 &uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1 &pinctrl_uart1_ctrl2>;
 	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
 	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
-	uart-has-rtscts;
 	fsl,dte-mode;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1 &pinctrl_uart1_ctrl2>;
+	uart-has-rtscts;
 };
 
+/* Colibri UART_B */
 &uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
 	assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>;
 	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
-	uart-has-rtscts;
 	fsl,dte-mode;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
 };
 
+/* Colibri UART_C */
 &uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
 	assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
 	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
 	fsl,dte-mode;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
 };
 
+/* Colibri USBC */
 &usbotg1 {
-	dr_mode = "host";
+	dr_mode = "otg";
+	extcon = <0>, <&extcon_usbc_det>;
 };
 
+/* Colibri MMC/SD */
 &usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>;
 	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
 	disable-wp;
+	no-1-8-v;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_cd_usdhc1>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_cd_usdhc1>;
+	pinctrl-3 = <&pinctrl_usdhc1_sleep &pinctrl_cd_usdhc1_sleep>;
+	vmmc-supply = <&reg_3v3>;
 	vqmmc-supply = <&reg_LDO2>;
+	wakeup-source;
 };
 
+/* eMMC on 1GB (eMMC) SKUs */
 &usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
 	assigned-clock-rates = <400000000>;
 	bus-width = <8>;
 	fsl,tuning-step = <2>;
-	vmmc-supply = <&reg_module_3v3>;
-	vqmmc-supply = <&reg_DCDC3>;
 	non-removable;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 	sdhci-caps-mask = <0x80000000 0x0>;
+	vmmc-supply = <&reg_module_3v3>;
+	vqmmc-supply = <&reg_DCDC3>;
 };
 
 &iomuxc {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4
-		     &pinctrl_gpio7 &pinctrl_usbc_det>;
-
-	pinctrl_gpio1: gpio1-grp {
-		fsl,pins = <
-			MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16	0x14 /* SODIMM 77 */
-			MX7D_PAD_EPDC_DATA09__GPIO2_IO9		0x14 /* SODIMM 89 */
-			MX7D_PAD_EPDC_DATA08__GPIO2_IO8		0x74 /* SODIMM 91 */
-			MX7D_PAD_LCD_RESET__GPIO3_IO4		0x14 /* SODIMM 93 */
-			MX7D_PAD_EPDC_DATA13__GPIO2_IO13	0x14 /* SODIMM 95 */
-			MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11	0x14 /* SODIMM 99 */
-			MX7D_PAD_EPDC_DATA10__GPIO2_IO10	0x74 /* SODIMM 105 */
-			MX7D_PAD_EPDC_DATA00__GPIO2_IO0		0x14 /* SODIMM 111 */
-			MX7D_PAD_EPDC_DATA01__GPIO2_IO1		0x14 /* SODIMM 113 */
-			MX7D_PAD_EPDC_DATA02__GPIO2_IO2		0x14 /* SODIMM 115 */
-			MX7D_PAD_EPDC_DATA03__GPIO2_IO3		0x14 /* SODIMM 117 */
-			MX7D_PAD_EPDC_DATA04__GPIO2_IO4		0x14 /* SODIMM 119 */
-			MX7D_PAD_EPDC_DATA05__GPIO2_IO5		0x14 /* SODIMM 121 */
-			MX7D_PAD_EPDC_DATA06__GPIO2_IO6		0x14 /* SODIMM 123 */
-			MX7D_PAD_EPDC_DATA07__GPIO2_IO7		0x14 /* SODIMM 125 */
-			MX7D_PAD_EPDC_SDCE2__GPIO2_IO22		0x14 /* SODIMM 127 */
-			MX7D_PAD_UART3_RTS_B__GPIO4_IO6		0x14 /* SODIMM 131 */
-			MX7D_PAD_EPDC_GDRL__GPIO2_IO26		0x14 /* SODIMM 133 */
-			MX7D_PAD_SAI1_RX_DATA__GPIO6_IO12	0x14 /* SODIMM 169 */
-			MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17	0x14 /* SODIMM 24 */
-			MX7D_PAD_SD2_DATA2__GPIO5_IO16		0x14 /* SODIMM 100 */
-			MX7D_PAD_SD2_DATA3__GPIO5_IO17		0x14 /* SODIMM 102 */
-			MX7D_PAD_EPDC_GDSP__GPIO2_IO27		0x14 /* SODIMM 104 */
-			MX7D_PAD_EPDC_BDR1__GPIO2_IO29		0x14 /* SODIMM 110 */
-			MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30	0x14 /* SODIMM 112 */
-			MX7D_PAD_EPDC_SDCLK__GPIO2_IO16		0x14 /* SODIMM 114 */
-			MX7D_PAD_EPDC_SDLE__GPIO2_IO17		0x14 /* SODIMM 116 */
-			MX7D_PAD_EPDC_SDOE__GPIO2_IO18		0x14 /* SODIMM 118 */
-			MX7D_PAD_EPDC_SDSHR__GPIO2_IO19		0x14 /* SODIMM 120 */
-			MX7D_PAD_EPDC_SDCE0__GPIO2_IO20		0x14 /* SODIMM 122 */
-			MX7D_PAD_EPDC_SDCE1__GPIO2_IO21		0x14 /* SODIMM 124 */
-			MX7D_PAD_EPDC_DATA14__GPIO2_IO14	0x14 /* SODIMM 126 */
-			MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31	0x14 /* SODIMM 128 */
-			MX7D_PAD_EPDC_SDCE3__GPIO2_IO23		0x14 /* SODIMM 130 */
-			MX7D_PAD_EPDC_GDCLK__GPIO2_IO24		0x14 /* SODIMM 132 */
-			MX7D_PAD_EPDC_GDOE__GPIO2_IO25		0x14 /* SODIMM 134 */
-			MX7D_PAD_EPDC_DATA12__GPIO2_IO12	0x14 /* SODIMM 150 */
-			MX7D_PAD_EPDC_DATA11__GPIO2_IO11	0x14 /* SODIMM 152 */
-			MX7D_PAD_SD2_CLK__GPIO5_IO12		0x14 /* SODIMM 184 */
-			MX7D_PAD_SD2_CMD__GPIO5_IO13		0x14 /* SODIMM 186 */
-		>;
-	};
-
-	pinctrl_gpio2: gpio2-grp { /* On X22 Camera interface */
-		fsl,pins = <
-			MX7D_PAD_ECSPI2_SS0__GPIO4_IO23		0x14 /* SODIMM 65 */
-			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x74 /* SODIMM 69 */
-			MX7D_PAD_I2C4_SDA__GPIO4_IO15		0x14 /* SODIMM 75 */
-			MX7D_PAD_ECSPI1_MISO__GPIO4_IO18	0x14 /* SODIMM 79 */
-			MX7D_PAD_I2C3_SCL__GPIO4_IO12		0x14 /* SODIMM 81 */
-			MX7D_PAD_ECSPI2_MISO__GPIO4_IO22	0x14 /* SODIMM 85 */
-			MX7D_PAD_ECSPI1_SS0__GPIO4_IO19		0x14 /* SODIMM 97 */
-			MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16	0x14 /* SODIMM 101 */
-			MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17	0x14 /* SODIMM 103 */
-			MX7D_PAD_I2C3_SDA__GPIO4_IO13		0x14 /* SODIMM 94 */
-			MX7D_PAD_I2C4_SCL__GPIO4_IO14		0x14 /* SODIMM 96 */
-			MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x14 /* SODIMM 98 */
-		>;
-	};
-
-	pinctrl_gpio3: gpio3-grp { /* LCD 18-23 */
+	pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4>;
+
+	/*
+	 * Atmel MXT touchsceen + Capacitive Touch Adapter
+	 * NOTE: This pin group conflicts with pin groups pinctrl_pwm2/pinctrl_pwm3.
+	 * Don't use them simultaneously.
+	 */
+	pinctrl_atmel_adapter: atmelconnectorgrp {
 		fsl,pins = <
-			MX7D_PAD_LCD_DATA18__GPIO3_IO23		0x14 /* SODIMM 136 */
-			MX7D_PAD_LCD_DATA19__GPIO3_IO24		0x14 /* SODIMM 138 */
-			MX7D_PAD_LCD_DATA20__GPIO3_IO25		0x14 /* SODIMM 140 */
-			MX7D_PAD_LCD_DATA21__GPIO3_IO26		0x14 /* SODIMM 142 */
-			MX7D_PAD_LCD_DATA22__GPIO3_IO27		0x74 /* SODIMM 144 */
-			MX7D_PAD_LCD_DATA23__GPIO3_IO28		0x74 /* SODIMM 146 */
+			MX7D_PAD_GPIO1_IO09__GPIO1_IO9		0x74 /* SODIMM 28 / INT */
+			MX7D_PAD_GPIO1_IO10__GPIO1_IO10		0x14 /* SODIMM 30 / RST */
 		>;
 	};
 
-	pinctrl_gpio4: gpio4-grp { /* Alternatively CAN2 */
+	/* Atmel MXT touchsceen + boards with built-in Capacitive Touch Connector */
+	pinctrl_atmel_connector: atmeladaptergrp {
 		fsl,pins = <
-			MX7D_PAD_GPIO1_IO15__GPIO1_IO15		0x14 /* SODIMM 178 */
-			MX7D_PAD_GPIO1_IO14__GPIO1_IO14		0x14 /* SODIMM 188 */
+			MX7D_PAD_EPDC_BDR0__GPIO2_IO28		0x14 /* SODIMM 106 / RST */
+			MX7D_PAD_EPDC_DATA15__GPIO2_IO15	0x74 /* SODIMM 107 / INT */
 		>;
 	};
 
-	pinctrl_gpio7: gpio7-grp { /* Alternatively CAN1 */
+	pinctrl_can_int: canintgrp {
 		fsl,pins = <
-			MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3	0x14 /* SODIMM 55 */
-			MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2	0x14 /* SODIMM 63 */
+			MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0X14 /* SODIMM 73 */
 		>;
 	};
 
-	pinctrl_i2c1_int: i2c1-int-grp { /* PMIC / TOUCH */
+	pinctrl_ecspi3: ecspi3grp {
 		fsl,pins = <
-			MX7D_PAD_GPIO1_IO13__GPIO1_IO13	0x79
+			MX7D_PAD_I2C1_SCL__ECSPI3_MISO		0x2 /* SODIMM 90 */
+			MX7D_PAD_I2C1_SDA__ECSPI3_MOSI		0x2 /* SODIMM 92 */
+			MX7D_PAD_I2C2_SCL__ECSPI3_SCLK		0x2 /* SODIMM 88 */
 		>;
 	};
 
-	pinctrl_can_int: can-int-grp {
+	pinctrl_ecspi3_cs: ecspi3csgrp {
 		fsl,pins = <
-			MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0X14 /* SODIMM 73 */
+			MX7D_PAD_I2C2_SDA__GPIO4_IO11		0x14 /* SODIMM 86 */
 		>;
 	};
 
 	pinctrl_enet1: enet1grp {
 		fsl,pins = <
-			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x73
 			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x73
 			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x73
 			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RX_ER		0x73
-
-			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x73
+			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x73
 			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x73
 			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x73
+			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x73
 			MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1		0x73
 			MX7D_PAD_SD2_CD_B__ENET1_MDIO			0x3
 			MX7D_PAD_SD2_WP__ENET1_MDC			0x3
 		>;
 	};
 
-	pinctrl_enet1_sleep: enet1sleepgrp {
+	pinctrl_enet1_sleep: enet1-sleepgrp {
 		fsl,pins = <
-			MX7D_PAD_ENET1_RGMII_RX_CTL__GPIO7_IO4		0x0
 			MX7D_PAD_ENET1_RGMII_RD0__GPIO7_IO0		0x0
 			MX7D_PAD_ENET1_RGMII_RD1__GPIO7_IO1		0x0
 			MX7D_PAD_ENET1_RGMII_RXC__GPIO7_IO5		0x0
-
-			MX7D_PAD_ENET1_RGMII_TX_CTL__GPIO7_IO10		0x0
+			MX7D_PAD_ENET1_RGMII_RX_CTL__GPIO7_IO4		0x0
 			MX7D_PAD_ENET1_RGMII_TD0__GPIO7_IO6		0x0
 			MX7D_PAD_ENET1_RGMII_TD1__GPIO7_IO7		0x0
+			MX7D_PAD_ENET1_RGMII_TX_CTL__GPIO7_IO10		0x0
 			MX7D_PAD_GPIO1_IO12__GPIO1_IO12			0x0
 			MX7D_PAD_SD2_CD_B__GPIO5_IO9			0x0
 			MX7D_PAD_SD2_WP__GPIO5_IO10			0x0
 		>;
 	};
 
-	pinctrl_ecspi3_cs: ecspi3-cs-grp {
+	pinctrl_flexcan1: flexcan1grp {
 		fsl,pins = <
-			MX7D_PAD_I2C2_SDA__GPIO4_IO11		0x14
+			MX7D_PAD_ENET1_RGMII_RD2__FLEXCAN1_RX	0x79 /* SODIMM 63 */
+			MX7D_PAD_ENET1_RGMII_RD3__FLEXCAN1_TX	0x79 /* SODIMM 55 */
 		>;
 	};
 
-	pinctrl_ecspi3: ecspi3-grp {
+	pinctrl_flexcan2: flexcan2grp {
 		fsl,pins = <
-			MX7D_PAD_I2C1_SCL__ECSPI3_MISO		0x2
-			MX7D_PAD_I2C1_SDA__ECSPI3_MOSI		0x2
-			MX7D_PAD_I2C2_SCL__ECSPI3_SCLK		0x2
+			MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x79 /* SODIMM 188 */
+			MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x79 /* SODIMM 178 */
 		>;
 	};
 
-	pinctrl_flexcan1: flexcan1-grp {
+	pinctrl_gpio1: gpio1grp {
 		fsl,pins = <
-			MX7D_PAD_ENET1_RGMII_RD3__FLEXCAN1_TX	0x79 /* SODIMM 55 */
-			MX7D_PAD_ENET1_RGMII_RD2__FLEXCAN1_RX	0x79 /* SODIMM 63 */
+			MX7D_PAD_EPDC_BDR1__GPIO2_IO29		0x14 /* SODIMM 110 */
+			MX7D_PAD_EPDC_DATA00__GPIO2_IO0		0x14 /* SODIMM 111 */
+			MX7D_PAD_EPDC_DATA01__GPIO2_IO1		0x14 /* SODIMM 113 */
+			MX7D_PAD_EPDC_DATA02__GPIO2_IO2		0x14 /* SODIMM 115 */
+			MX7D_PAD_EPDC_DATA03__GPIO2_IO3		0x14 /* SODIMM 117 */
+			MX7D_PAD_EPDC_DATA04__GPIO2_IO4		0x14 /* SODIMM 119 */
+			MX7D_PAD_EPDC_DATA05__GPIO2_IO5		0x14 /* SODIMM 121 */
+			MX7D_PAD_EPDC_DATA06__GPIO2_IO6		0x14 /* SODIMM 123 */
+			MX7D_PAD_EPDC_DATA07__GPIO2_IO7		0x14 /* SODIMM 125 */
+			MX7D_PAD_EPDC_DATA08__GPIO2_IO8		0x74 /* SODIMM 91 */
+			MX7D_PAD_EPDC_DATA09__GPIO2_IO9		0x14 /* SODIMM 89 */
+			MX7D_PAD_EPDC_DATA10__GPIO2_IO10	0x74 /* SODIMM 105 */
+			MX7D_PAD_EPDC_DATA11__GPIO2_IO11	0x14 /* SODIMM 152 */
+			MX7D_PAD_EPDC_DATA12__GPIO2_IO12	0x14 /* SODIMM 150 */
+			MX7D_PAD_EPDC_DATA14__GPIO2_IO14	0x14 /* SODIMM 126 */
+			MX7D_PAD_EPDC_GDCLK__GPIO2_IO24		0x14 /* SODIMM 132 */
+			MX7D_PAD_EPDC_GDOE__GPIO2_IO25		0x14 /* SODIMM 134 */
+			MX7D_PAD_EPDC_GDRL__GPIO2_IO26		0x14 /* SODIMM 133 */
+			MX7D_PAD_EPDC_GDSP__GPIO2_IO27		0x14 /* SODIMM 104 */
+			MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30	0x14 /* SODIMM 112 */
+			MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31	0x14 /* SODIMM 128 */
+			MX7D_PAD_EPDC_SDCE0__GPIO2_IO20		0x14 /* SODIMM 122 */
+			MX7D_PAD_EPDC_SDCE1__GPIO2_IO21		0x14 /* SODIMM 124 */
+			MX7D_PAD_EPDC_SDCE2__GPIO2_IO22		0x14 /* SODIMM 127 */
+			MX7D_PAD_EPDC_SDCE3__GPIO2_IO23		0x14 /* SODIMM 130 */
+			MX7D_PAD_EPDC_SDCLK__GPIO2_IO16		0x14 /* SODIMM 114 */
+			MX7D_PAD_EPDC_SDLE__GPIO2_IO17		0x14 /* SODIMM 116 */
+			MX7D_PAD_EPDC_SDOE__GPIO2_IO18		0x14 /* SODIMM 118 */
+			MX7D_PAD_EPDC_SDSHR__GPIO2_IO19		0x14 /* SODIMM 120 */
+			MX7D_PAD_LCD_RESET__GPIO3_IO4		0x14 /* SODIMM 93 */
+			MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17	0x14 /* SODIMM 24 */
+			MX7D_PAD_SAI1_RX_DATA__GPIO6_IO12	0x14 /* SODIMM 169 */
+			MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16	0x14 /* SODIMM 77 */
+			MX7D_PAD_SD2_CLK__GPIO5_IO12		0x14 /* SODIMM 184 */
+			MX7D_PAD_SD2_CMD__GPIO5_IO13		0x14 /* SODIMM 186 */
+			MX7D_PAD_SD2_DATA2__GPIO5_IO16		0x14 /* SODIMM 100 */
+			MX7D_PAD_SD2_DATA3__GPIO5_IO17		0x14 /* SODIMM 102 */
+			MX7D_PAD_UART3_RTS_B__GPIO4_IO6		0x14 /* SODIMM 131 */
 		>;
 	};
 
-	pinctrl_flexcan2: flexcan2-grp {
+	pinctrl_gpio2: gpio2grp { /* On X22 Camera interface */
 		fsl,pins = <
-			MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x79 /* SODIMM 188 */
-			MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x79 /* SODIMM 178 */
+			MX7D_PAD_ECSPI1_MISO__GPIO4_IO18	0x14 /* SODIMM 79 */
+			MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17	0x14 /* SODIMM 103 */
+			MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16	0x14 /* SODIMM 101 */
+			MX7D_PAD_ECSPI1_SS0__GPIO4_IO19		0x14 /* SODIMM 97 */
+			MX7D_PAD_ECSPI2_MISO__GPIO4_IO22	0x14 /* SODIMM 85 */
+			MX7D_PAD_ECSPI2_SS0__GPIO4_IO23		0x14 /* SODIMM 65 */
+			MX7D_PAD_I2C3_SCL__GPIO4_IO12		0x14 /* SODIMM 81 */
+			MX7D_PAD_I2C3_SDA__GPIO4_IO13		0x14 /* SODIMM 94 */
+			MX7D_PAD_I2C4_SCL__GPIO4_IO14		0x14 /* SODIMM 96 */
+			MX7D_PAD_I2C4_SDA__GPIO4_IO15		0x14 /* SODIMM 75 */
+			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x74 /* SODIMM 69 */
+			MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x14 /* SODIMM 98 */
+		>;
+	};
+
+	pinctrl_gpio3: gpio3grp { /* LCD 18-23 */
+		fsl,pins = <
+			MX7D_PAD_LCD_DATA18__GPIO3_IO23		0x14 /* SODIMM 136 */
+			MX7D_PAD_LCD_DATA19__GPIO3_IO24		0x14 /* SODIMM 138 */
+			MX7D_PAD_LCD_DATA20__GPIO3_IO25		0x14 /* SODIMM 140 */
+			MX7D_PAD_LCD_DATA21__GPIO3_IO26		0x14 /* SODIMM 142 */
+			MX7D_PAD_LCD_DATA22__GPIO3_IO27		0x74 /* SODIMM 144 */
+			MX7D_PAD_LCD_DATA23__GPIO3_IO28		0x74 /* SODIMM 146 */
+		>;
+	};
+
+	pinctrl_gpio4: gpio4grp { /* Alternatively CAN2 */
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO14__GPIO1_IO14		0x14 /* SODIMM 188 */
+			MX7D_PAD_GPIO1_IO15__GPIO1_IO15		0x14 /* SODIMM 178 */
+		>;
+	};
+
+	pinctrl_gpio7: gpio7grp { /* Alternatively CAN1 */
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2	0x14 /* SODIMM 63 */
+			MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3	0x14 /* SODIMM 55 */
 		>;
 	};
 
-	pinctrl_gpio_bl_on: gpio-bl-on {
+	pinctrl_gpio_bl_on: gpioblongrp {
 		fsl,pins = <
 			MX7D_PAD_SD1_WP__GPIO5_IO1		0x14 /* SODIMM 71 */
 		>;
 	};
 
-	pinctrl_gpmi_nand: gpmi-nand-grp {
+	pinctrl_gpmi_nand: gpminandgrp {
 		fsl,pins = <
-			MX7D_PAD_SD3_CLK__NAND_CLE		0x71
-			MX7D_PAD_SD3_CMD__NAND_ALE		0x71
 			MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B	0x71
 			MX7D_PAD_SAI1_TX_DATA__NAND_READY_B	0x74
-			MX7D_PAD_SD3_STROBE__NAND_RE_B		0x71
-			MX7D_PAD_SD3_RESET_B__NAND_WE_B		0x71
+			MX7D_PAD_SD3_CLK__NAND_CLE		0x71
+			MX7D_PAD_SD3_CMD__NAND_ALE		0x71
 			MX7D_PAD_SD3_DATA0__NAND_DATA00		0x71
 			MX7D_PAD_SD3_DATA1__NAND_DATA01		0x71
 			MX7D_PAD_SD3_DATA2__NAND_DATA02		0x71
@@ -669,13 +836,21 @@
 			MX7D_PAD_SD3_DATA5__NAND_DATA05		0x71
 			MX7D_PAD_SD3_DATA6__NAND_DATA06		0x71
 			MX7D_PAD_SD3_DATA7__NAND_DATA07		0x71
+			MX7D_PAD_SD3_RESET_B__NAND_WE_B		0x71
+			MX7D_PAD_SD3_STROBE__NAND_RE_B		0x71
 		>;
 	};
 
-	pinctrl_i2c4: i2c4-grp {
+	pinctrl_i2c1_int: i2c1intgrp { /* PMIC / TOUCH */
 		fsl,pins = <
-			MX7D_PAD_ENET1_RGMII_TD3__I2C4_SDA	0x4000007f
-			MX7D_PAD_ENET1_RGMII_TD2__I2C4_SCL	0x4000007f
+			MX7D_PAD_GPIO1_IO13__GPIO1_IO13	0x79
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_TD2__I2C4_SCL	0x4000007f /* SODIMM 196 */
+			MX7D_PAD_ENET1_RGMII_TD3__I2C4_SDA	0x4000007f /* SODIMM 194 */
 		>;
 	};
 
@@ -686,155 +861,176 @@
 		>;
 	};
 
-	pinctrl_lcdif_dat: lcdif-dat-grp {
+	pinctrl_lcdif_dat: lcdifdatgrp {
+		fsl,pins = <
+			MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79 /* SODIMM 76 */
+			MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79 /* SODIMM 70 */
+			MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79 /* SODIMM 60 */
+			MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79 /* SODIMM 58 */
+			MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79 /* SODIMM 78 */
+			MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79 /* SODIMM 72 */
+			MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79 /* SODIMM 80 */
+			MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79 /* SODIMM 46 */
+			MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79 /* SODIMM 62 */
+			MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79 /* SODIMM 48 */
+			MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79 /* SODIMM 74 */
+			MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79 /* SODIMM 50 */
+			MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79 /* SODIMM 52 */
+			MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79 /* SODIMM 54 */
+			MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79 /* SODIMM 66 */
+			MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79 /* SODIMM 64 */
+			MX7D_PAD_LCD_DATA16__LCD_DATA16		0x79 /* SODIMM 57 */
+			MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79 /* SODIMM 61 */
+		>;
+	};
+
+	pinctrl_lcdif_dat_24: lcdifdat24grp {
 		fsl,pins = <
-			MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79
-			MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79
-			MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79
-			MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79
-			MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79
-			MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79
-			MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79
-			MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79
-			MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79
-			MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79
-			MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79
-			MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79
-			MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79
-			MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79
-			MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79
-			MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79
-			MX7D_PAD_LCD_DATA16__LCD_DATA16		0x79
-			MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79
+			MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79 /* SODIMM 136 */
+			MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79 /* SODIMM 138 */
+			MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79 /* SODIMM 140 */
+			MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79 /* SODIMM 142 */
+			MX7D_PAD_LCD_DATA22__LCD_DATA22		0x79 /* SODIMM 144 */
+			MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79 /* SODIMM 146 */
 		>;
 	};
 
-	pinctrl_lcdif_dat_24: lcdif-dat-24-grp {
+	pinctrl_lcdif_ctrl: lcdifctrlgrp {
 		fsl,pins = <
-			MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79
-			MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79
-			MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79
-			MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79
-			MX7D_PAD_LCD_DATA22__LCD_DATA22		0x79
-			MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79
+			MX7D_PAD_LCD_CLK__LCD_CLK		0x79 /* SODIMM 56 */
+			MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x79 /* SODIMM 44 */
+			MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x79 /* SODIMM 68 */
+			MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x79 /* SODIMM 82 */
 		>;
 	};
 
-	pinctrl_lcdif_ctrl: lcdif-ctrl-grp {
+	pinctrl_lvds_transceiver: lvdstx {
 		fsl,pins = <
-			MX7D_PAD_LCD_CLK__LCD_CLK		0x79
-			MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x79
-			MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x79
-			MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x79
+			MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2     0x14 /* SODIMM 63 */
+			MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3     0x74 /* SODIMM 55 */
+			MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11    0x14 /* SODIMM 99 */
+			MX7D_PAD_EPDC_DATA13__GPIO2_IO13        0x14 /* SODIMM 95 */
 		>;
 	};
 
-	pinctrl_pwm1: pwm1-grp {
+	pinctrl_pwm1: pwm1grp {
 		fsl,pins = <
-			MX7D_PAD_GPIO1_IO08__PWM1_OUT		0x79
-			MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21	0x4
+			MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21	0x4  /* SODIMM 59 */
+			MX7D_PAD_GPIO1_IO08__PWM1_OUT		0x79 /* SODIMM 59 */
 		>;
 	};
 
-	pinctrl_pwm2: pwm2-grp {
+	pinctrl_pwm2: pwm2grp {
 		fsl,pins = <
-			MX7D_PAD_GPIO1_IO09__PWM2_OUT		0x79
+			MX7D_PAD_GPIO1_IO09__PWM2_OUT		0x79 /* SODIMM 28 */
 		>;
 	};
 
-	pinctrl_pwm3: pwm3-grp {
+	pinctrl_pwm3: pwm3grp {
 		fsl,pins = <
-			MX7D_PAD_GPIO1_IO10__PWM3_OUT		0x79
+			MX7D_PAD_GPIO1_IO10__PWM3_OUT		0x79 /* SODIMM 30 */
 		>;
 	};
 
-	pinctrl_pwm4: pwm4-grp {
+	pinctrl_pwm4: pwm4grp {
 		fsl,pins = <
-			MX7D_PAD_GPIO1_IO11__PWM4_OUT		0x79
-			MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20	0x4
+			MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20	0x4  /* SODIMM 67 */
+			MX7D_PAD_GPIO1_IO11__PWM4_OUT		0x79 /* SODIMM 67 */
 		>;
 	};
 
-	pinctrl_uart1: uart1-grp {
+	pinctrl_uart1: uart1grp {
 		fsl,pins = <
-			MX7D_PAD_UART1_TX_DATA__UART1_DTE_RX	0x79
-			MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX	0x79
-			MX7D_PAD_SAI2_TX_BCLK__UART1_DTE_CTS	0x79
-			MX7D_PAD_SAI2_TX_SYNC__UART1_DTE_RTS	0x79
+			MX7D_PAD_SAI2_TX_BCLK__UART1_DTE_CTS	0x79 /* SODIMM 25 */
+			MX7D_PAD_SAI2_TX_SYNC__UART1_DTE_RTS	0x79 /* SODIMM 27 */
+			MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX	0x79 /* SODIMM 35 */
+			MX7D_PAD_UART1_TX_DATA__UART1_DTE_RX	0x79 /* SODIMM 33 */
 		>;
 	};
 
-	pinctrl_uart1_ctrl1: uart1-ctrl1-grp {
+	pinctrl_uart1_ctrl1: uart1ctrl1grp {
 		fsl,pins = <
-			MX7D_PAD_SD2_DATA1__GPIO5_IO15		0x14 /* DCD */
-			MX7D_PAD_SD2_DATA0__GPIO5_IO14		0x14 /* DTR */
+			MX7D_PAD_SD2_DATA0__GPIO5_IO14		0x14 /* SODIMM 23 / DTR */
+			MX7D_PAD_SD2_DATA1__GPIO5_IO15		0x14 /* SODIMM 31 / DCD */
 		>;
 	};
 
-	pinctrl_uart2: uart2-grp {
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX7D_PAD_SAI2_RX_DATA__UART2_DTE_RTS	0x79 /* SODIMM 32 / CTS */
+			MX7D_PAD_SAI2_TX_DATA__UART2_DTE_CTS	0x79 /* SODIMM 34 / RTS */
+			MX7D_PAD_UART2_RX_DATA__UART2_DTE_TX	0x79 /* SODIMM 38 */
+			MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX	0x79 /* SODIMM 36 */
+		>;
+	};
+	pinctrl_uart3: uart3grp {
 		fsl,pins = <
-			MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX 0x79
-			MX7D_PAD_UART2_RX_DATA__UART2_DTE_TX 0x79
-			MX7D_PAD_SAI2_RX_DATA__UART2_DTE_RTS 0x79
-			MX7D_PAD_SAI2_TX_DATA__UART2_DTE_CTS 0x79
+			MX7D_PAD_UART3_RX_DATA__UART3_DTE_TX	0x79 /* SODIMM 21 */
+			MX7D_PAD_UART3_TX_DATA__UART3_DTE_RX	0x79 /* SODIMM 19 */
 		>;
 	};
-	pinctrl_uart3: uart3-grp {
+
+	pinctrl_usbc_det: usbcdetgrp {
 		fsl,pins = <
-			MX7D_PAD_UART3_TX_DATA__UART3_DTE_RX 0x79
-			MX7D_PAD_UART3_RX_DATA__UART3_DTE_TX 0x79
+			MX7D_PAD_ENET1_CRS__GPIO7_IO14		0x14 /* SODIMM 137 / USBC_DET */
 		>;
 	};
 
-	pinctrl_usbc_det: gpio-usbc-det {
+	pinctrl_usbh_reg: usbhreggrp {
 		fsl,pins = <
-			MX7D_PAD_ENET1_CRS__GPIO7_IO14	0x14
+			MX7D_PAD_UART3_CTS_B__GPIO4_IO7		0x14 /* SODIMM 129 / USBH_PEN */
 		>;
 	};
 
-	pinctrl_usbh_reg: gpio-usbh-vbus {
+	pinctrl_usdhc1: usdhc1grp {
 		fsl,pins = <
-			MX7D_PAD_UART3_CTS_B__GPIO4_IO7	0x14 /* SODIMM 129 USBH PEN */
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x19 /* SODIMM 47 */
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x59 /* SODIMM 190 */
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59 /* SODIMM 192 */
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59 /* SODIMM 49 */
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59 /* SODIMM 51 */
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59 /* SODIMM 53 */
 		>;
 	};
 
-	pinctrl_usdhc1: usdhc1-grp {
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
 		fsl,pins = <
-			MX7D_PAD_SD1_CMD__SD1_CMD	0x59
-			MX7D_PAD_SD1_CLK__SD1_CLK	0x19
-			MX7D_PAD_SD1_DATA0__SD1_DATA0	0x59
-			MX7D_PAD_SD1_DATA1__SD1_DATA1	0x59
-			MX7D_PAD_SD1_DATA2__SD1_DATA2	0x59
-			MX7D_PAD_SD1_DATA3__SD1_DATA3	0x59
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x1a
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x5a
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5a
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5a
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5a
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5a
 		>;
 	};
 
-	pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
 		fsl,pins = <
-			MX7D_PAD_SD1_CMD__SD1_CMD	0x5a
-			MX7D_PAD_SD1_CLK__SD1_CLK	0x1a
-			MX7D_PAD_SD1_DATA0__SD1_DATA0	0x5a
-			MX7D_PAD_SD1_DATA1__SD1_DATA1	0x5a
-			MX7D_PAD_SD1_DATA2__SD1_DATA2	0x5a
-			MX7D_PAD_SD1_DATA3__SD1_DATA3	0x5a
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x1b
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x5b
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5b
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5b
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5b
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5b
 		>;
 	};
 
-	pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
+	/* Avoid backfeeding with removed card power. */
+	pinctrl_usdhc1_sleep: usdhc1-slpgrp {
 		fsl,pins = <
-			MX7D_PAD_SD1_CMD__SD1_CMD	0x5b
-			MX7D_PAD_SD1_CLK__SD1_CLK	0x1b
-			MX7D_PAD_SD1_DATA0__SD1_DATA0	0x5b
-			MX7D_PAD_SD1_DATA1__SD1_DATA1	0x5b
-			MX7D_PAD_SD1_DATA2__SD1_DATA2	0x5b
-			MX7D_PAD_SD1_DATA3__SD1_DATA3	0x5b
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x10
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x10
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x10
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x10
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x10
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x10
 		>;
 	};
 
 	pinctrl_usdhc3: usdhc3grp {
 		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
 			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
 			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
 			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
 			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
@@ -847,10 +1043,10 @@
 		>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
 		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
 			MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
 			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
 			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
 			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
@@ -863,10 +1059,10 @@
 		>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
 		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
 			MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
 			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
 			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
 			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
@@ -879,16 +1075,16 @@
 		>;
 	};
 
-	pinctrl_sai1: sai1-grp {
+	pinctrl_sai1: sai1grp {
 		fsl,pins = <
-			MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK     0x1f
-			MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC	0x1f
 			MX7D_PAD_ENET1_COL__SAI1_TX_DATA0	0x30
+			MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK     0x1f
 			MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0	0x1f
+			MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC	0x1f
 		>;
 	};
 
-	pinctrl_sai1_mclk: sai1grp_mclk {
+	pinctrl_sai1_mclk: sai1mclkgrp {
 		fsl,pins = <
 			MX7D_PAD_SAI1_MCLK__SAI1_MCLK           0x1f
 		>;
@@ -899,23 +1095,35 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpio_lpsr>;
 
-	pinctrl_gpio_lpsr: gpio1-grp {
+	pinctrl_cd_usdhc1: cdusdhc1grp {
 		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2	0x59
-			MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3	0x59
+			MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0	0x59 /* SODIMM 43 / MMC_CD */
+		>;
+	};
+
+	pinctrl_cd_usdhc1_sleep: cdusdhc1-slpgrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0	0x0
+		>;
+	};
+
+	pinctrl_gpio_lpsr: gpiolpsrgrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2	0x59 /* SODIMM 135 */
+			MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3	0x59 /* SODIMM 22 */
 		>;
 	};
 
 	pinctrl_gpiokeys: gpiokeysgrp {
 		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1	0x19
+			MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1	0x19 /* SODIMM 45 / WAKE_UP */
 		>;
 	};
 
-	pinctrl_i2c1: i2c1-grp {
+	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO05__I2C1_SDA	0x4000007f
 			MX7D_PAD_LPSR_GPIO1_IO04__I2C1_SCL	0x4000007f
+			MX7D_PAD_LPSR_GPIO1_IO05__I2C1_SDA	0x4000007f
 		>;
 	};
 
@@ -926,16 +1134,10 @@
 		>;
 	};
 
-	pinctrl_cd_usdhc1: usdhc1-cd-grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0	0x59 /* CD */
-		>;
-	};
-
-	pinctrl_uart1_ctrl2: uart1-ctrl2-grp {
+	pinctrl_uart1_ctrl2: uart1ctrl2grp {
 		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	0x14 /* DSR */
-			MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x14 /* RI */
+			MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x14 /* SODIMM 37 / RI */
+			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	0x14 /* SODIMM 29 / DSR */
 		>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx7-mba7.dtsi b/arch/arm/boot/dts/imx7-mba7.dtsi
index 49086c6b6a0a..3df6dff7734a 100644
--- a/arch/arm/boot/dts/imx7-mba7.dtsi
+++ b/arch/arm/boot/dts/imx7-mba7.dtsi
@@ -302,7 +302,7 @@
 	tlv320aic32x4: audio-codec@18 {
 		compatible = "ti,tlv320aic32x4";
 		reg = <0x18>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		clock-names = "mclk";
 		ldoin-supply = <&reg_audio_3v3>;
 		iov-supply = <&reg_audio_3v3>;
diff --git a/arch/arm/boot/dts/imx7d-colibri-aster.dts b/arch/arm/boot/dts/imx7d-colibri-aster.dts
index f3f0537d5a37..90aaeddfb4f6 100644
--- a/arch/arm/boot/dts/imx7d-colibri-aster.dts
+++ b/arch/arm/boot/dts/imx7d-colibri-aster.dts
@@ -1,7 +1,6 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2017-2020 Toradex AG
- *
+ * Copyright 2017-2022 Toradex
  */
 
 /dts-v1/;
@@ -10,11 +9,32 @@
 
 / {
 	model = "Toradex Colibri iMX7D on Aster Carrier Board";
-	compatible = "toradex,colibri-imx7d-aster", "toradex,colibri-imx7d",
+	compatible = "toradex,colibri-imx7d-aster",
+		     "toradex,colibri-imx7d",
 		     "fsl,imx7d";
 };
 
+&ad7879_ts {
+	status = "okay";
+};
+
+&atmel_mxt_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+/* Colibri USBH */
 &usbotg2 {
-	vbus-supply = <&reg_usbh_vbus>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc-aster.dts b/arch/arm/boot/dts/imx7d-colibri-emmc-aster.dts
index 20480276cb0e..3ec9ef6baaa4 100644
--- a/arch/arm/boot/dts/imx7d-colibri-emmc-aster.dts
+++ b/arch/arm/boot/dts/imx7d-colibri-emmc-aster.dts
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2017-2020 Toradex AG
+ * Copyright 2017-2022 Toradex
  *
  */
 
@@ -11,10 +11,12 @@
 / {
 	model = "Toradex Colibri iMX7D 1GB (eMMC) on Aster Carrier Board";
 	compatible = "toradex,colibri-imx7d-emmc-aster",
-		     "toradex,colibri-imx7d-emmc", "fsl,imx7d";
+		     "toradex,colibri-imx7d-emmc",
+		     "toradex,colibri-imx7d",
+		     "fsl,imx7d";
 };
 
+/* Colibri USBH */
 &usbotg2 {
-	vbus-supply = <&reg_usbh_vbus>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc-eval-v3.dts b/arch/arm/boot/dts/imx7d-colibri-emmc-eval-v3.dts
index 8ee73c870b12..6d505cb02aad 100644
--- a/arch/arm/boot/dts/imx7d-colibri-emmc-eval-v3.dts
+++ b/arch/arm/boot/dts/imx7d-colibri-emmc-eval-v3.dts
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2017 Toradex AG
+ * Copyright 2017-2022 Toradex
  */
 
 /dts-v1/;
@@ -10,10 +10,12 @@
 / {
 	model = "Toradex Colibri iMX7D 1GB (eMMC) on Colibri Evaluation Board V3";
 	compatible = "toradex,colibri-imx7d-emmc-eval-v3",
-		     "toradex,colibri-imx7d-emmc", "fsl,imx7d";
+		     "toradex,colibri-imx7d-emmc",
+		     "toradex,colibri-imx7d",
+		     "fsl,imx7d";
 };
 
+/* Colibri USBH */
 &usbotg2 {
-	vbus-supply = <&reg_usbh_vbus>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc-iris-v2.dts b/arch/arm/boot/dts/imx7d-colibri-emmc-iris-v2.dts
new file mode 100644
index 000000000000..7347659557f3
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-colibri-emmc-iris-v2.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+#include "imx7d-colibri-emmc.dtsi"
+#include "imx7-colibri-iris-v2.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7D 1GB on Iris V2 Carrier Board";
+	compatible = "toradex,colibri-imx7d-emmc-iris-v2",
+		     "toradex,colibri-imx7d-emmc",
+		     "toradex,colibri-imx7d",
+		     "fsl,imx7d";
+};
+
+/* Colibri USBH */
+&usbotg2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc-iris.dts b/arch/arm/boot/dts/imx7d-colibri-emmc-iris.dts
new file mode 100644
index 000000000000..5324c92e368d
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-colibri-emmc-iris.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+#include "imx7d-colibri-emmc.dtsi"
+#include "imx7-colibri-iris.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7D 1GB on Iris Carrier Board";
+	compatible = "toradex,colibri-imx7d-emmc-iris",
+		     "toradex,colibri-imx7d-emmc",
+		     "toradex,colibri-imx7d",
+		     "fsl,imx7d";
+};
+
+/* Colibri USBH */
+&usbotg2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi b/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi
index af39e5370fa1..2fb4d2133a1b 100644
--- a/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi
+++ b/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi
@@ -1,18 +1,28 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2017 Toradex AG
+ * Copyright 2017-2022 Toradex
  */
 
 #include "imx7d.dtsi"
 #include "imx7-colibri.dtsi"
 
 / {
+	aliases {
+		/* Required to properly pass MAC addresses from bootloader. */
+		ethernet0 = &fec1;
+		ethernet1 = &fec2;
+	};
+
 	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>;
 	};
 };
 
+&cpu1 {
+	cpu-supply = <&reg_DCDC2>;
+};
+
 &gpio6 {
 	gpio-line-names = "",
 			  "",
@@ -39,10 +49,13 @@
 			  "SODIMM_34";
 };
 
+/* Colibri USBH */
 &usbotg2 {
 	dr_mode = "host";
+	vbus-supply = <&reg_usbh_vbus>;
 };
 
+/* eMMC */
 &usdhc3 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts
index 87b132bcd272..c7a8b5aa2408 100644
--- a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2016-2020 Toradex
+ * Copyright 2016-2022 Toradex
  */
 
 /dts-v1/;
@@ -9,11 +9,48 @@
 
 / {
 	model = "Toradex Colibri iMX7D on Colibri Evaluation Board V3";
-	compatible = "toradex,colibri-imx7d-eval-v3", "toradex,colibri-imx7d",
+	compatible = "toradex,colibri-imx7d-eval-v3",
+		     "toradex,colibri-imx7d",
 		     "fsl,imx7d";
 };
 
+&ad7879_ts {
+	status = "okay";
+};
+
+/*
+ * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3.
+ * So if you enable following capacitive touch controller, disable pwm2/pwm3 first.
+ */
+&atmel_mxt_ts {
+	status = "disabled";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+/* Colibri PWM<B> */
+&pwm2 {
+	/* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+	status = "okay";
+};
+
+/* Colibri PWM<C> */
+&pwm3 {
+	/* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+	status = "okay";
+};
+
+/* Colibri USBH */
 &usbotg2 {
-	vbus-supply = <&reg_usbh_vbus>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx7d-colibri-iris-v2.dts b/arch/arm/boot/dts/imx7d-colibri-iris-v2.dts
new file mode 100644
index 000000000000..5762f51d5f0f
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-colibri-iris-v2.dts
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+#include "imx7d-colibri.dtsi"
+#include "imx7-colibri-iris-v2.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7D on Iris V2 Carrier Board";
+	compatible = "toradex,colibri-imx7d-iris-v2",
+		     "toradex,colibri-imx7d",
+		     "fsl,imx7d";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&atmel_mxt_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&gpio2 {
+	/*
+	 * This switches the LVDS transceiver to VESA color mapping mode.
+	 */
+	lvds-color-map-hog {
+		gpio-hog;
+		gpios = <13 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */
+		line-name = "LVDS_COLOR_MAP";
+		output-low;
+	};
+};
+
+&gpio7 {
+	/*
+	 * This switches the LVDS transceiver to the 24-bit RGB mode.
+	 */
+	lvds-rgb-mode-hog {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */
+		line-name = "LVDS_RGB_MODE";
+		output-low;
+	};
+
+	/*
+	 * This switches the LVDS transceiver to the single-channel
+	 * output mode.
+	 */
+	lvds-ch-mode-hog {
+		gpio-hog;
+		gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */
+		line-name = "LVDS_CH_MODE";
+		output-high;
+	};
+
+	/* This turns the LVDS transceiver on */
+	lvds-power-on-hog {
+		gpio-hog;
+		gpios = <11 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */
+		line-name = "LVDS_POWER_ON";
+		output-high;
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+/* Colibri USBH */
+&usbotg2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7d-colibri-iris.dts b/arch/arm/boot/dts/imx7d-colibri-iris.dts
new file mode 100644
index 000000000000..9c63cb9d9a64
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-colibri-iris.dts
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+#include "imx7d-colibri.dtsi"
+#include "imx7-colibri-iris.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7D on Iris Carrier Board";
+	compatible = "toradex,colibri-imx7d-iris",
+		     "toradex,colibri-imx7d",
+		     "fsl,imx7d";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+/*
+ * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3.
+ * So if you enable following capacitive touch controller, disable pwm2/pwm3 first.
+ */
+&atmel_mxt_ts {
+	status = "disabled";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+/* Colibri PWM<B> */
+&pwm2 {
+	/* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+	status = "okay";
+};
+
+/* Colibri PWM<C> */
+&pwm3 {
+	/* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+	status = "okay";
+};
+
+/* Colibri USBH */
+&usbotg2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7d-colibri.dtsi b/arch/arm/boot/dts/imx7d-colibri.dtsi
index 219a0404a058..531a45b176a1 100644
--- a/arch/arm/boot/dts/imx7d-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7d-colibri.dtsi
@@ -1,12 +1,18 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2016-2020 Toradex
+ * Copyright 2016-2022 Toradex
  */
 
 #include "imx7d.dtsi"
 #include "imx7-colibri.dtsi"
 
 / {
+	aliases {
+		/* Required to properly pass MAC addresses from bootloader. */
+		ethernet0 = &fec1;
+		ethernet1 = &fec2;
+	};
+
 	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>;
@@ -17,10 +23,13 @@
 	cpu-supply = <&reg_DCDC2>;
 };
 
+/* NAND */
 &gpmi {
 	status = "okay";
 };
 
+/* Colibri USBH */
 &usbotg2 {
 	dr_mode = "host";
+	vbus-supply = <&reg_usbh_vbus>;
 };
diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts
index e0751e6ba3c0..a31de900139d 100644
--- a/arch/arm/boot/dts/imx7d-nitrogen7.dts
+++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts
@@ -288,7 +288,7 @@
 	codec: wm8960@1a {
 		compatible = "wlf,wm8960";
 		reg = <0x1a>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		clock-names = "mclk";
 		wlf,shared-lrclk;
 	};
diff --git a/arch/arm/boot/dts/imx7d-pico-hobbit.dts b/arch/arm/boot/dts/imx7d-pico-hobbit.dts
index 7b2198a9372c..d917dc4f2f22 100644
--- a/arch/arm/boot/dts/imx7d-pico-hobbit.dts
+++ b/arch/arm/boot/dts/imx7d-pico-hobbit.dts
@@ -31,7 +31,7 @@
 
 		dailink_master: simple-audio-card,codec {
 			sound-dai = <&sgtl5000>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		};
 	};
 };
@@ -41,7 +41,7 @@
 		#sound-dai-cells = <0>;
 		reg = <0x0a>;
 		compatible = "fsl,sgtl5000";
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_vref_1v8>;
 	};
diff --git a/arch/arm/boot/dts/imx7d-pico-pi.dts b/arch/arm/boot/dts/imx7d-pico-pi.dts
index 70bea95c06d8..f263e391e24c 100644
--- a/arch/arm/boot/dts/imx7d-pico-pi.dts
+++ b/arch/arm/boot/dts/imx7d-pico-pi.dts
@@ -31,7 +31,7 @@
 
 		dailink_master: simple-audio-card,codec {
 			sound-dai = <&sgtl5000>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		};
 	};
 };
@@ -41,7 +41,7 @@
 		#sound-dai-cells = <0>;
 		reg = <0x0a>;
 		compatible = "fsl,sgtl5000";
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_vref_1v8>;
 	};
diff --git a/arch/arm/boot/dts/imx7d-pico.dtsi b/arch/arm/boot/dts/imx7d-pico.dtsi
index e519897fae08..e0bff39e8d3e 100644
--- a/arch/arm/boot/dts/imx7d-pico.dtsi
+++ b/arch/arm/boot/dts/imx7d-pico.dtsi
@@ -41,7 +41,7 @@
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
-        };
+	};
 
 	reg_wlreg_on: regulator-wlreg_on {
 		compatible = "regulator-fixed";
@@ -432,7 +432,7 @@
 			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x1
 			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x1
 			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x1
-			MX7D_PAD_SD3_RESET_B__GPIO6_IO11                0x1  /* Ethernet reset */
+			MX7D_PAD_SD3_RESET_B__GPIO6_IO11		0x1  /* Ethernet reset */
 		>;
 	};
 
@@ -493,19 +493,19 @@
 
 	pinctrl_pwm1: pwm1 {
 		fsl,pins = <
-			MX7D_PAD_GPIO1_IO08__PWM1_OUT   0x7f
+			MX7D_PAD_GPIO1_IO08__PWM1_OUT	0x7f
 		>;
 	};
 
 	pinctrl_pwm2: pwm2 {
 		fsl,pins = <
-			MX7D_PAD_GPIO1_IO09__PWM2_OUT   0x7f
+			MX7D_PAD_GPIO1_IO09__PWM2_OUT	0x7f
 		>;
 	};
 
 	pinctrl_pwm3: pwm3 {
 		fsl,pins = <
-			MX7D_PAD_GPIO1_IO10__PWM3_OUT   0x7f
+			MX7D_PAD_GPIO1_IO10__PWM3_OUT	0x7f
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 7813ef960f6e..f483bc0afe5e 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -24,14 +24,14 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
-		volume-up {
+		key-volume-up {
 			label = "Volume Up";
 			gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
 			wakeup-source;
 		};
 
-		volume-down {
+		key-volume-down {
 			label = "Volume Down";
 			gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
@@ -39,7 +39,7 @@
 		};
 	};
 
-	spi4 {
+	spi-4 {
 		compatible = "spi-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_spi4>;
@@ -201,17 +201,12 @@
 		compatible = "ti,tsc2046";
 		reg = <0>;
 		spi-max-frequency = <1000000>;
-		pinctrl-names ="default";
+		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_tsc2046_pendown>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <29 0>;
 		pendown-gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>;
-		ti,x-min = /bits/ 16 <0>;
-		ti,x-max = /bits/ 16 <0>;
-		ti,y-min = /bits/ 16 <0>;
-		ti,y-max = /bits/ 16 <0>;
-		ti,pressure-max = /bits/ 16 <0>;
-		ti,x-plate-ohms = /bits/ 16 <400>;
+		touchscreen-max-pressure = <255>;
 		wakeup-source;
 	};
 };
@@ -385,14 +380,14 @@
 	codec: wm8960@1a {
 		compatible = "wlf,wm8960";
 		reg = <0x1a>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		clock-names = "mclk";
 		wlf,shared-lrclk;
 		wlf,hp-cfg = <2 2 3>;
 		wlf,gpio-cfg = <1 3>;
 		assigned-clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_SRC>,
 				  <&clks IMX7D_PLL_AUDIO_POST_DIV>,
-				  <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+				  <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
 		assigned-clock-rates = <0>, <884736000>, <12288000>;
 	};
diff --git a/arch/arm/boot/dts/imx7d-smegw01.dts b/arch/arm/boot/dts/imx7d-smegw01.dts
new file mode 100644
index 000000000000..546268b8d0b1
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-smegw01.dts
@@ -0,0 +1,467 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+//
+// Copyright (C) 2020 PHYTEC Messtechnik GmbH
+// Author: Jens Lang  <J.Lang@phytec.de>
+// Copyright (C) 2021 Fabio Estevam <festevam@denx.de>
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "imx7d.dtsi"
+
+/ {
+	model = "Storopack SMEGW01 board";
+	compatible = "storopack,imx7d-smegw01", "fsl,imx7d";
+
+	aliases {
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc3;
+		mmc2 = &usdhc2;
+		rtc0 = &i2c_rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reg_lte_on: regulator-lte-on {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lte_on>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "lte_on";
+		gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_lte_nreset: regulator-lte-nreset {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lte_nreset>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "LTE_nReset";
+		gpio = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_wifi: regulator-wifi {
+		compatible = "regulator-fixed";
+		gpio = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi>;
+		regulator-name = "wifi_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_wlan_rfkill: regulator-wlan-rfkill {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-2 = <&pinctrl_rfkill>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "wlan_rfkill";
+		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_usbotg_vbus: regulator-usbotg-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg1_pwr_gpio>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 05 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	sram@0 {
+		compatible = "microchip,48l640";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <16000000>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-id0022.1622",
+				     "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+		};
+
+		ethphy1: ethernet-phy@2 {
+			compatible = "ethernet-phy-id0022.1622",
+				     "ethernet-phy-ieee802.3-c22";
+			reg = <2>;
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET2_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	fsl,magic-packet;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 =<&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	i2c_rtc: rtc@52 {
+		compatible = "microcrystal,rv3028";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc_int>;
+		reg = <0x52>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1_lpsr>;
+	dr_mode = "otg";
+	vbus-supply = <&reg_usbotg_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg2>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	wakeup-source;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+	vmmc-supply = <&reg_wifi>;
+	wakeup-source;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+	assigned-clock-rates = <400000000>;
+	max-frequency = <200000000>;
+	bus-width = <8>;
+	fsl,tuning-step = <1>;
+	non-removable;
+	cap-mmc-highspeed;
+	cap-mmc-hw-reset;
+	mmc-hs200-1_8v;
+	mmc-ddr-1_8v;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI1_SS0__GPIO4_IO19	0x04
+			MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK	0x04
+			MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI	0x04
+			MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO	0x04
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x5
+			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x5
+			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x5
+			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x5
+			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x5
+			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x5
+			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x5
+			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x5
+			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x5
+			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x5
+			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x5
+			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x5
+			MX7D_PAD_GPIO1_IO10__ENET1_MDIO		0x7
+			MX7D_PAD_GPIO1_IO11__ENET1_MDC		0x7
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x5
+			MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC	0x5
+			MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0	0x5
+			MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1	0x5
+			MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2	0x5
+			MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3	0x5
+			MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0	0x5
+			MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1	0x5
+			MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2	0x5
+			MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3	0x5
+			MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x5
+			MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC	0x5
+			MX7D_PAD_GPIO1_IO09__GPIO1_IO9	0x08
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX7D_PAD_I2C2_SCL__I2C2_SCL		0x40000004
+			MX7D_PAD_I2C2_SDA__I2C2_SDA		0x40000004
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX	0x0b0b0
+			MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX	0x0b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x0b0b0
+			MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x0b0b0
+		>;
+	};
+
+	pinctrl_lte_on: lteongrp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12	0x17059
+		>;
+	};
+
+	pinctrl_lte_nreset: ltenresetgrp {
+		fsl,pins = <
+			MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21	0x17059
+		>;
+	};
+
+	pinctrl_rfkill: rfkillrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA11__GPIO2_IO11	0x17059
+		>;
+	};
+
+	pinctrl_rtc_int: rtcintgrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA15__GPIO2_IO15	0x17059
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x74
+			MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x7c
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX	0x7c
+			MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX	0x74
+		>;
+	};
+
+	pinctrl_usbotg1_lpsr: usbotg1 {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC	0x04
+		>;
+	};
+
+	pinctrl_usbotg1_pwr: usbotg1-pwr {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO05__USB_OTG1_PWR	0x04
+		>;
+	};
+
+	pinctrl_usbotg1_pwr_gpio: usbotg1-pwr-gpio {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x04
+		>;
+	};
+
+	pinctrl_usbotg2: usbotg2grp {
+		fsl,pins = <
+			MX7D_PAD_UART3_RTS_B__USB_OTG2_OC	0x04
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x59
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x59
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x19
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_CLK__SD2_CLK		0x19
+			MX7D_PAD_SD2_CMD__SD2_CMD		0x59
+			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x59
+			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x59
+			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x59
+			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x59
+			MX7D_PAD_SD2_CD_B__SD2_CD_B		0x08
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5d
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1d
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5d
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5d
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5d
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5d
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5d
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5d
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5d
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5d
+			MX7D_PAD_SD3_STROBE__SD3_STROBE	0x1d
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5e
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1e
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5e
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5e
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5e
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5e
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5e
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5e
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5e
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5e
+			MX7D_PAD_SD3_STROBE__SD3_STROBE	0x1e
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5f
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x0f
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5f
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5f
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5f
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5f
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5f
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5f
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5f
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5f
+			MX7D_PAD_SD3_STROBE__SD3_STROBE	0x1f
+		>;
+	};
+
+	pinctrl_wifi: wifigrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30	0x04
+			MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x04
+		>;
+	};
+};
+
+&iomuxc_lpsr {
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x74
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7d-zii-rmu2.dts b/arch/arm/boot/dts/imx7d-zii-rmu2.dts
index 1065941807e8..1c9f25848bf7 100644
--- a/arch/arm/boot/dts/imx7d-zii-rmu2.dts
+++ b/arch/arm/boot/dts/imx7d-zii-rmu2.dts
@@ -24,7 +24,7 @@
 		pinctrl-0 = <&pinctrl_leds_debug>;
 		pinctrl-names = "default";
 
-		debug {
+		led-debug {
 			label = "zii:green:debug1";
 			gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/imx7d-zii-rpu2.dts b/arch/arm/boot/dts/imx7d-zii-rpu2.dts
index 893bd30aa2a3..9d29490ab4c9 100644
--- a/arch/arm/boot/dts/imx7d-zii-rpu2.dts
+++ b/arch/arm/boot/dts/imx7d-zii-rpu2.dts
@@ -36,7 +36,7 @@
 		pinctrl-0 = <&pinctrl_leds_debug>;
 		pinctrl-names = "default";
 
-		debug {
+		led-debug {
 			label = "zii:green:debug1";
 			gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index b7735979b7e4..7ceb7c09f7ad 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -78,7 +78,7 @@
 		#phy-cells = <0>;
 	};
 
-	soc {
+	soc: soc {
 		etm@3007d000 {
 			compatible = "arm,coresight-etm3x", "arm,primecell";
 			reg = <0x3007d000 0x1000>;
@@ -113,6 +113,49 @@
 			      <0x31004000 0x2000>,
 			      <0x31006000 0x2000>;
 		};
+
+		pcie: pcie@33800000 {
+			compatible = "fsl,imx7d-pcie";
+			reg = <0x33800000 0x4000>,
+			      <0x4ff00000 0x80000>;
+			reg-names = "dbi", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0 0          0x4ff80000 0 0x00010000>, /* downstream I/O */
+				 <0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */
+			num-lanes = <1>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			/*
+			 * Reference manual lists pci irqs incorrectly
+			 * Real hardware ordering is same as imx6: D+MSI, C, B, A
+			 */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>,
+				 <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>,
+				 <&clks IMX7D_PCIE_PHY_ROOT_CLK>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy";
+			assigned-clocks = <&clks IMX7D_PCIE_CTRL_ROOT_SRC>,
+					  <&clks IMX7D_PCIE_PHY_ROOT_SRC>;
+			assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_250M_CLK>,
+						 <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+
+			fsl,max-link-speed = <2>;
+			power-domains = <&pgc_pcie_phy>;
+			resets = <&src IMX7_RESET_PCIEPHY>,
+				 <&src IMX7_RESET_PCIE_CTRL_APPS_EN>,
+				 <&src IMX7_RESET_PCIE_CTRL_APPS_TURNOFF>;
+			reset-names = "pciephy", "apps", "turnoff";
+			fsl,imx7d-pcie-phy = <&pcie_phy>;
+			status = "disabled";
+		};
 	};
 };
 
@@ -162,49 +205,6 @@
 		fsl,stop-mode = <&gpr 0x10 4>;
 		status = "disabled";
 	};
-
-	pcie: pcie@33800000 {
-		compatible = "fsl,imx7d-pcie";
-		reg = <0x33800000 0x4000>,
-		      <0x4ff00000 0x80000>;
-		reg-names = "dbi", "config";
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		bus-range = <0x00 0xff>;
-		ranges = <0x81000000 0 0          0x4ff80000 0 0x00010000>, /* downstream I/O */
-			 <0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */
-		num-lanes = <1>;
-		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "msi";
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0x7>;
-		/*
-		 * Reference manual lists pci irqs incorrectly
-		 * Real hardware ordering is same as imx6: D+MSI, C, B, A
-		 */
-		interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>,
-			 <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>,
-			 <&clks IMX7D_PCIE_PHY_ROOT_CLK>;
-		clock-names = "pcie", "pcie_bus", "pcie_phy";
-		assigned-clocks = <&clks IMX7D_PCIE_CTRL_ROOT_SRC>,
-				  <&clks IMX7D_PCIE_PHY_ROOT_SRC>;
-		assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_250M_CLK>,
-					 <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
-
-		fsl,max-link-speed = <2>;
-		power-domains = <&pgc_pcie_phy>;
-		resets = <&src IMX7_RESET_PCIEPHY>,
-			 <&src IMX7_RESET_PCIE_CTRL_APPS_EN>,
-			 <&src IMX7_RESET_PCIE_CTRL_APPS_TURNOFF>;
-		reset-names = "pciephy", "apps", "turnoff";
-		fsl,imx7d-pcie-phy = <&pcie_phy>;
-		status = "disabled";
-	};
 };
 
 &ca_funnel_in_ports {
diff --git a/arch/arm/boot/dts/imx7s-colibri-aster.dts b/arch/arm/boot/dts/imx7s-colibri-aster.dts
index fca4e0a95c1b..58ebb02d948a 100644
--- a/arch/arm/boot/dts/imx7s-colibri-aster.dts
+++ b/arch/arm/boot/dts/imx7s-colibri-aster.dts
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2017-2020 Toradex AG
+ * Copyright 2017-2022 Toradex
  *
  */
 
@@ -10,6 +10,27 @@
 
 / {
 	model = "Toradex Colibri iMX7S on Aster Carrier Board";
-	compatible = "toradex,colibri-imx7s-aster", "toradex,colibri-imx7s",
+	compatible = "toradex,colibri-imx7s-aster",
+		     "toradex,colibri-imx7s",
 		     "fsl,imx7s";
 };
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&atmel_mxt_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts b/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts
index aa70d3f2e2e2..38de76630d6a 100644
--- a/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2016-2020 Toradex
+ * Copyright 2016-2022 Toradex
  */
 
 /dts-v1/;
@@ -9,6 +9,43 @@
 
 / {
 	model = "Toradex Colibri iMX7S on Colibri Evaluation Board V3";
-	compatible = "toradex,colibri-imx7s-eval-v3", "toradex,colibri-imx7s",
+	compatible = "toradex,colibri-imx7s-eval-v3",
+		     "toradex,colibri-imx7s",
 		     "fsl,imx7s";
 };
+
+&ad7879_ts {
+	status = "okay";
+};
+
+/*
+ * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3.
+ * So if you enable following capacitive touch controller, disable pwm2/pwm3 first.
+ */
+&atmel_mxt_ts {
+	status = "disabled";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+/* Colibri PWM<B> */
+&pwm2 {
+	/* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+	status = "okay";
+};
+
+/* Colibri PWM<C> */
+&pwm3 {
+	/* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7s-colibri-iris-v2.dts b/arch/arm/boot/dts/imx7s-colibri-iris-v2.dts
new file mode 100644
index 000000000000..72b5c17ab1ab
--- /dev/null
+++ b/arch/arm/boot/dts/imx7s-colibri-iris-v2.dts
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+#include "imx7s-colibri.dtsi"
+#include "imx7-colibri-iris-v2.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7S on Iris V2 Carrier Board";
+	compatible = "toradex,colibri-imx7s-iris-v2",
+		     "toradex,colibri-imx7s",
+		     "fsl,imx7s";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&atmel_mxt_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&gpio2 {
+	/*
+	 * This switches the LVDS transceiver to VESA color mapping mode.
+	 */
+	lvds-color-map-hog {
+		gpio-hog;
+		gpios = <13 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */
+		line-name = "LVDS_COLOR_MAP";
+		output-low;
+	};
+};
+
+&gpio7 {
+	/*
+	 * This switches the LVDS transceiver to the 24-bit RGB mode.
+	 */
+	lvds-rgb-mode-hog {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */
+		line-name = "LVDS_RGB_MODE";
+		output-low;
+	};
+
+	/*
+	 * This switches the LVDS transceiver to the single-channel
+	 * output mode.
+	 */
+	lvds-ch-mode-hog {
+		gpio-hog;
+		gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */
+		line-name = "LVDS_CH_MODE";
+		output-high;
+	};
+
+	/* This turns the LVDS transceiver on */
+	lvds-power-on-hog {
+		gpio-hog;
+		gpios = <11 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */
+		line-name = "LVDS_POWER_ON";
+		output-high;
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7s-colibri-iris.dts b/arch/arm/boot/dts/imx7s-colibri-iris.dts
new file mode 100644
index 000000000000..26ba72c17feb
--- /dev/null
+++ b/arch/arm/boot/dts/imx7s-colibri-iris.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+#include "imx7s-colibri.dtsi"
+#include "imx7-colibri-iris.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7S on Iris Carrier Board";
+	compatible = "toradex,colibri-imx7s-iris",
+		     "toradex,colibri-imx7s",
+		     "fsl,imx7s";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+/*
+ * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3.
+ * So if you enable following capacitive touch controller, disable pwm2/pwm3 first.
+ */
+&atmel_mxt_ts {
+	status = "disabled";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+/* Colibri PWM<B> */
+&pwm2 {
+	/* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+	status = "okay";
+};
+
+/* Colibri PWM<C> */
+&pwm3 {
+	/* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7s-colibri.dtsi b/arch/arm/boot/dts/imx7s-colibri.dtsi
index 94de220a5965..ef51395d3537 100644
--- a/arch/arm/boot/dts/imx7s-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7s-colibri.dtsi
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2016-2020 Toradex
+ * Copyright 2016-2022 Toradex
  */
 
 #include "imx7s.dtsi"
@@ -13,6 +13,7 @@
 	};
 };
 
+/* NAND */
 &gpmi {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts
index 4f1edef06c92..e8734d218b9d 100644
--- a/arch/arm/boot/dts/imx7s-warp.dts
+++ b/arch/arm/boot/dts/imx7s-warp.dts
@@ -75,7 +75,7 @@
 
 		dailink_master: simple-audio-card,codec {
 			sound-dai = <&codec>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		};
 	};
 };
@@ -232,7 +232,7 @@
 		#sound-dai-cells = <0>;
 		reg = <0x0a>;
 		compatible = "fsl,sgtl5000";
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_sai1_mclk>;
 		VDDA-supply = <&vgen4_reg>;
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 52a9aeecdbb2..0fc9e6b8b05d 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -76,6 +76,22 @@
 			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clks IMX7D_CLK_ARM>;
 			cpu-idle-states = <&cpu_sleep_wait>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+			nvmem-cells = <&fuse_grade>;
+			nvmem-cell-names = "speed_grade";
+		};
+	};
+
+	cpu0_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-792000000 {
+			opp-hz = /bits/ 64 <792000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <150000>;
+			opp-supported-hw = <0xf>, <0xf>;
 		};
 	};
 
@@ -104,6 +120,7 @@
 		compatible = "usb-nop-xceiv";
 		clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
 		clock-names = "main_clk";
+		power-domains = <&pgc_hsic_phy>;
 		#phy-cells = <0>;
 	};
 
@@ -159,7 +176,7 @@
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
-	soc {
+	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
@@ -430,7 +447,7 @@
 				status = "disabled";
 			};
 
-			iomuxc_lpsr: iomuxc-lpsr@302c0000 {
+			iomuxc_lpsr: pinctrl@302c0000 {
 				compatible = "fsl,imx7d-iomuxc-lpsr";
 				reg = <0x302c0000 0x10000>;
 				fsl,input-sel = <&iomuxc>;
@@ -1137,7 +1154,6 @@
 				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
 				reg = <0x30b30000 0x200>;
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&pgc_hsic_phy>;
 				clocks = <&clks IMX7D_USB_CTRL_CLK>;
 				fsl,usbphy = <&usbphynop3>;
 				fsl,usbmisc = <&usbmisc3 0>;
@@ -1208,7 +1224,7 @@
 				status = "disabled";
 			};
 
-			sdma: sdma@30bd0000 {
+			sdma: dma-controller@30bd0000 {
 				compatible = "fsl,imx7d-sdma", "fsl,imx35-sdma";
 				reg = <0x30bd0000 0x10000>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi
index b7ea37ad4e55..7f7d2d5122fb 100644
--- a/arch/arm/boot/dts/imx7ulp.dtsi
+++ b/arch/arm/boot/dts/imx7ulp.dtsi
@@ -259,7 +259,7 @@
 			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
 			assigned-clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
-			assigned-clocks-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>;
+			assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>;
 			timeout-sec = <40>;
 		};
 
@@ -328,8 +328,9 @@
 			compatible = "fsl,imx7ulp-lpi2c";
 			reg = <0x40a40000 0x10000>;
 			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&pcc3 IMX7ULP_CLK_LPI2C6>;
-			clock-names = "ipg";
+			clocks = <&pcc3 IMX7ULP_CLK_LPI2C6>,
+				 <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>;
+			clock-names = "per", "ipg";
 			assigned-clocks = <&pcc3 IMX7ULP_CLK_LPI2C6>;
 			assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>;
 			assigned-clock-rates = <48000000>;
@@ -340,8 +341,9 @@
 			compatible = "fsl,imx7ulp-lpi2c";
 			reg = <0x40a50000 0x10000>;
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&pcc3 IMX7ULP_CLK_LPI2C7>;
-			clock-names = "ipg";
+			clocks = <&pcc3 IMX7ULP_CLK_LPI2C7>,
+				 <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>;
+			clock-names = "per", "ipg";
 			assigned-clocks = <&pcc3 IMX7ULP_CLK_LPI2C7>;
 			assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>;
 			assigned-clock-rates = <48000000>;
diff --git a/arch/arm/boot/dts/imxrt1050-evk.dts b/arch/arm/boot/dts/imxrt1050-evk.dts
new file mode 100644
index 000000000000..6a9c10decf52
--- /dev/null
+++ b/arch/arm/boot/dts/imxrt1050-evk.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019
+ * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
+ */
+
+/dts-v1/;
+#include "imxrt1050.dtsi"
+#include "imxrt1050-pinfunc.h"
+
+/ {
+	model = "NXP IMXRT1050-evk board";
+	compatible = "fsl,imxrt1050-evk", "fsl,imxrt1050";
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		mmc0 = &usdhc1;
+		serial0 = &lpuart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x2000000>;
+	};
+};
+
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart1>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl_lpuart1: lpuart1grp {
+		fsl,pins = <
+			MXRT1050_IOMUXC_GPIO_AD_B0_12_LPUART1_TXD	0xf1
+			MXRT1050_IOMUXC_GPIO_AD_B0_13_LPUART1_RXD	0xf1
+		>;
+	};
+
+	pinctrl_usdhc0: usdhc0grp {
+		fsl,pins = <
+			MXRT1050_IOMUXC_GPIO_B1_12_USDHC1_CD_B		0x1B000
+			MXRT1050_IOMUXC_GPIO_B1_14_USDHC1_VSELECT	0xB069
+			MXRT1050_IOMUXC_GPIO_SD_B0_00_USDHC1_CMD	0x17061
+			MXRT1050_IOMUXC_GPIO_SD_B0_01_USDHC1_CLK	0x17061
+			MXRT1050_IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3	0x17061
+			MXRT1050_IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2	0x17061
+			MXRT1050_IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1	0x17061
+			MXRT1050_IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0	0x17061
+		>;
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc0>;
+	pinctrl-1 = <&pinctrl_usdhc0>;
+	pinctrl-2 = <&pinctrl_usdhc0>;
+	pinctrl-3 = <&pinctrl_usdhc0>;
+	cd-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imxrt1050-pinfunc.h b/arch/arm/boot/dts/imxrt1050-pinfunc.h
new file mode 100644
index 000000000000..22c14a3262ad
--- /dev/null
+++ b/arch/arm/boot/dts/imxrt1050-pinfunc.h
@@ -0,0 +1,993 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (C) 2019
+ * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_IMXRT1050_PINFUNC_H
+#define _DT_BINDINGS_PINCTRL_IMXRT1050_PINFUNC_H
+
+#define IMX_PAD_SION	0x40000000
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+
+#define MXRT1050_IOMUXC_GPIO_EMC_00_SEMC_DA00				0x014 0x204 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_00_FLEXPWM4_PWM0_A			0x014 0x204 0x494 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_00_LPSPI2_SCK				0x014 0x204 0x500 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_00_XBAR_INOUT2				0x014 0x204 0x60C 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_00_FLEXIO1_D00				0x014 0x204 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_00_GPIO4_IO00				0x014 0x204 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_01_SEMC_DA01				0x018 0x208 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_01_FLEXPWM4_PWM0_B			0x018 0x208 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_01_LPSPI2_PCS0				0x018 0x208 0x4FC 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_01_XBAR_INOUT3				0x018 0x208 0x610 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_01_FLEXIO1_D01				0x018 0x208 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_01_GPIO4_IO01				0x018 0x208 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_02_SEMC_DA02				0x01C 0x20C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_02_FLEXPWM4_PWM1_A			0x01C 0x20C 0x498 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_02_LPSPI2_SDO				0x01C 0x20C 0x508 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_02_XBAR_INOUT4				0x01C 0x20C 0x614 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_02_FLEXIO1_D02				0x01C 0x20C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_02_GPIO4_IO02				0x01C 0x20C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_03_SEMC_DA03				0x020 0x210 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_03_FLEXPWM4_PWM1_B			0x020 0x210 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_03_LPSPI2_SDI				0x020 0x210 0x504 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_03_XBAR_INOUT5				0x020 0x210 0x618 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_03_FLEXIO1_D03				0x020 0x210 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_03_GPIO4_IO03				0x020 0x210 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_04_SEMC_DA04				0x024 0x214 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_04_FLEXPWM4_PWM2_A			0x024 0x214 0x49C 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_04_SAI2_TX_DATA			0x024 0x214 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_04_XBAR_INOUT6				0x024 0x214 0x61C 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_04_FLEXIO1_D04				0x024 0x214 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_04_GPIO4_IO04				0x024 0x214 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_05_SEMC_DA05				0x028 0x218 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_05_FLEXPWM4_PWM2_B			0x028 0x218 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_05_SAI2_TX_SYNC			0x028 0x218 0x5C4 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_05_XBAR_INOUT7				0x028 0x218 0x620 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_05_FLEXIO1_D05				0x028 0x218 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_05_GPIO4_IO05				0x028 0x218 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_06_SEMC_DA06				0x02C 0x21C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_06_FLEXPWM2_PWM0_A			0x02C 0x21C 0x478 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_06_SAI2_TX_BCLK			0x02C 0x21C 0x5C0 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_06_XBAR_INOUT8				0x02C 0x21C 0x624 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_06_FLEXIO1_D06				0x02C 0x21C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_06_GPIO4_IO06				0x02C 0x21C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_07_SEMC_DA07				0x030 0x220 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_07_FLEXPWM2_PWM0_B			0x030 0x220 0x488 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_07_SAI2_MCLK				0x030 0x220 0x5B0 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_07_XBAR_INOUT9				0x030 0x220 0x628 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_07_FLEXIO1_D07				0x030 0x220 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_07_GPIO4_IO07				0x030 0x220 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_08_SEMC_DM00				0x034 0x224 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_08_FLEXPWM2_PWM1_A			0x034 0x224 0x47C 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_08_SAI2_RX_DATA			0x034 0x224 0x5B8 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_08_XBAR_INOUT17			0x034 0x224 0x62C 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_08_FLEXIO1_D08				0x034 0x224 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_08_GPIO4_IO08				0x034 0x224 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_09_SEMC_ADDR00				0x038 0x228 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_09_FLEXPWM2_PWM1_B			0x038 0x228 0x48C 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_09_SAI2_RX_SYNC			0x038 0x228 0x5BC 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_09_FLEXCAN2_TX				0x038 0x228 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_09_FLEXIO1_D09				0x038 0x228 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_09_GPIO4_IO09				0x038 0x228 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_10_SEMC_ADDR01				0x03C 0x22C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_10_FLEXPWM2_PWM2_A			0x03C 0x22C 0x480 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_10_SAI2_RX_BCLK			0x03C 0x22C 0x5B4 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_10_FLEXCAN2_RX				0x03C 0x22C 0x450 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_10_FLEXIO1_D10				0x03C 0x22C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_10_GPIO4_IO10				0x03C 0x22C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_11_SEMC_ADDR02				0x040 0x230 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_11_FLEXPWM2_PWM2_B			0x040 0x230 0x490 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_11_LPI2C4_SDA				0x040 0x230 0x4E8 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_11_USDHC2_RESET_B			0x040 0x230 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_11_FLEXIO1_D11				0x040 0x230 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_11_GPIO4_IO11				0x040 0x230 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_12_SEMC_ADDR03				0x044 0x234 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_12_XBAR_INOUT24			0x044 0x234 0x640 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_12_LPI2C4_SCL				0x044 0x234 0x4E4 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_12_USDHC2_WP				0x044 0x234 0x5D8 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_12_FLEXPWM1_PWM3_A			0x044 0x234 0x454 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_12_GPIO4_IO12				0x044 0x234 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_13_SEMC_ADDR04				0x048 0x238 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_13_XBAR_INOUT25			0x048 0x238 0x650 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_13_LPUART3_TXD				0x048 0x238 0x53C 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_13_MQS_RIGHT				0x048 0x238 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_13_FLEXPWM1_PWM3_B			0x048 0x238 0x464 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_13_GPIO4_IO13				0x048 0x238 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_14_SEMC_ADDR05				0x04C 0x23C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_14_XBAR_INOUT19			0x04C 0x23C 0x654 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_14_LPUART3_RXD				0x04C 0x23C 0x538 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_14_MQS_LEFT				0x04C 0x23C 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_14_LPSPI2_PCS1				0x04C 0x23C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_14_GPIO4_IO14				0x04C 0x23C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_15_SEMC_ADDR06				0x050 0x240 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_15_XBAR_INOUT20			0x050 0x240 0x634 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_15_LPUART3_CTS_B			0x050 0x240 0x534 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_15_SPDIF_OUT				0x050 0x240 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_15_TMR3_TIMER0				0x050 0x240 0x57C 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_15_GPIO4_IO15				0x050 0x240 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_16_SEMC_ADDR07				0x054 0x244 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_16_XBAR_INOUT21			0x054 0x244 0x658 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_16_LPUART3_RTS_B			0x054 0x244 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_16_SPDIF_IN				0x054 0x244 0x5C8 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_16_TMR3_TIMER1				0x054 0x244 0x580 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_16_GPIO4_IO16				0x054 0x244 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_17_SEMC_ADDR08				0x058 0x248 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_17_FLEXPWM4_PWM3_A			0x058 0x248 0x4A0 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_17_LPUART4_CTS_B			0x058 0x248 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_17_FLEXCAN1_TX				0x058 0x248 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_17_TMR3_TIMER2				0x058 0x248 0x584 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_17_GPIO4_IO17				0x058 0x248 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_18_SEMC_ADDR09				0x05C 0x24C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_18_FLEXPWM4_PWM3_B			0x05C 0x24C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_18_LPUART4_RTS_B			0x05C 0x24C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_18_FLEXCAN1_RX				0x05C 0x24C 0x44C 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_18_TMR3_TIMER3				0x05C 0x24C 0x588 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_18_GPIO4_IO18				0x05C 0x24C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_18_SNVS_VIO_5_CTL			0x05C 0x24C 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_19_SEMC_ADDR11				0x060 0x250 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_19_FLEXPWM2_PWM3_A			0x060 0x250 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_19_LPUART4_TXD				0x060 0x250 0x544 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_19_ENET_RX_DATA01			0x060 0x250 0x438 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_19_TMR2_TIMER0				0x060 0x250 0x56C 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_19_GPIO4_IO19				0x060 0x250 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_19_SNVS_VIO_5				0x060 0x250 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_20_SEMC_ADDR12				0x064 0x254 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_20_FLEXPWM2_PWM3_B			0x064 0x254 0x484 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_20_LPUART4_RXD				0x064 0x254 0x540 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_20_ENET_RX_DATA00			0x064 0x254 0x434 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_20_TMR2_TIMER0				0x064 0x254 0x570 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_20_GPIO4_IO20				0x064 0x254 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_21_SEMC_BA0				0x068 0x258 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_21_FLEXPWM3_PWM3_A			0x068 0x258 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_21_LPI2C3_SDA				0x068 0x258 0x4E0 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_21_ENET_TX_DATA01			0x068 0x258 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_21_TMR2_TIMER2				0x068 0x258 0x574 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_21_GPIO4_IO21				0x068 0x258 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_22_SEMC_BA1				0x06C 0x25C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_22_FLEXPWM3_PWM3_B			0x06C 0x25C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_22_LPI2C3_SCL				0x06C 0x25C 0x4DC 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_22_ENET_TX_DATA00			0x06C 0x25C 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_22_TMR2_TIMER3				0x06C 0x25C 0x578 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_22_GPIO4_IO22				0x06C 0x25C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_23_SEMC_ADDR10				0x070 0x260 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_23_FLEXPWM1_PWM0_A			0x070 0x260 0x458 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_23_LPUART5_TXD				0x070 0x260 0x54C 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_23_ENET_RX_EN				0x070 0x260 0x43C 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_23_GPT1_CAPTURE2			0x070 0x260 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_23_GPIO4_IO23				0x070 0x260 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_24_SEMC_CAS				0x074 0x264 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_24_FLEXPWM1_PWM0_B			0x074 0x264 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_24_LPUART5_RXD				0x074 0x264 0x548 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_24_ENET_TX_EN				0x074 0x264 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_24_GPT1_CAPTURE1			0x074 0x264 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_24_GPIO4_IO24				0x074 0x264 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_25_SEMC_RAS				0x078 0x268 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_25_FLEXPWM1_PWM1_A			0x078 0x268 0x45C 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_25_LPUART6_TXD				0x078 0x268 0x554 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_25_ENET_TX_CLK				0x078 0x268 0x448 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_25_ENET_REF_CLK			0x078 0x268 0x42C 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_25_GPIO4_IO25				0x078 0x268 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_26_SEMC_CLK				0x07C 0x26C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_26_FLEXPWM1_PWM1_B			0x07C 0x26C 0x46C 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_26_LPUART6_RXD				0x07C 0x26C 0x550 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_26_ENET_RX_ER				0x07C 0x26C 0x440 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_26_FLEXIO1_D12				0x07C 0x26C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_26_GPIO4_IO26				0x07C 0x26C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_27_SEMC_CKE				0x080 0x270 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_27_FLEXPWM1_PWM2_A			0x080 0x270 0x460 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_27_LPUART5_RTS_B			0x080 0x270 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_27_LPSPI1_SCK				0x080 0x270 0x4F0 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_27_FLEXIO1_D13				0x080 0x270 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_27_GPIO4_IO27				0x080 0x270 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_28_SEMC_WE				0x084 0x274 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_28_FLEXPWM1_PWM2_B			0x084 0x274 0x470 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_28_LPUART5_CTS_B			0x084 0x274 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_28_LPSPI1_SDO				0x084 0x274 0x4F8 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_28_FLEXIO1_D14				0x084 0x274 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_28_GPIO4_IO28				0x084 0x274 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_29_SEMC_CS0				0x088 0x278 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_29_FLEXPWM3_PWM0_A			0x088 0x278 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_29_LPUART6_RTS_B			0x088 0x278 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_29_LPSPI1_SDI				0x088 0x278 0x4F4 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_29_FLEXIO1_D15				0x088 0x278 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_29_GPIO4_IO29				0x088 0x278 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_30_SEMC_DA08				0x08C 0x27C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_30_FLEXPWM3_PWM0_B			0x08C 0x27C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_30_LPUART6_CTS_B			0x08C 0x27C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_30_LPSPI1_PCS0				0x08C 0x27C 0x4EC 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_30_CSI_DATA23				0x08C 0x27C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_30_GPIO4_IO30				0x08C 0x27C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_31_SEMC_DA09				0x090 0x280 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_31_FLEXPWM3_PWM1_A			0x090 0x280 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_31_LPUART7_TXD				0x090 0x280 0x55C 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_31_LPSPI1_PCS1				0x090 0x280 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_31_CSI_DATA22				0x090 0x280 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_31_GPIO4_IO31				0x090 0x280 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_32_SEMC_DA10				0x094 0x284 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_32_FLEXPWM3_PWM1_B			0x094 0x284 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_32_LPUART7_RXD				0x094 0x284 0x558 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_32_CCM_PMIC_READY			0x094 0x284 0x3FC 0x3 0x4
+#define MXRT1050_IOMUXC_GPIO_EMC_32_CSI_DATA21				0x094 0x284 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_32_GPIO3_IO18				0x094 0x284 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_33_SEMC_DA11				0x098 0x288 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_33_FLEXPWM3_PWM2_A			0x098 0x288 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_33_USDHC1_RESET_B			0x098 0x288 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_33_SAI3_RX_DATA			0x098 0x288 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_33_CSI_DATA20				0x098 0x288 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_33_GPIO3_IO19				0x098 0x288 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_34_SEMC_DA12				0x09C 0x28C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_34_FLEXPWM3_PWM2_B			0x09C 0x28C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_34_USDHC1_VSELECT			0x09C 0x28C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_34_SAI3_RX_SYNC			0x09C 0x28C 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_34_CSI_DATA19				0x09C 0x28C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_34_GPIO3_IO20				0x09C 0x28C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_35_SEMC_DA13				0x0A0 0x290 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_35_XBAR_INOUT18			0x0A0 0x290 0x630 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_35_GPT1_COMPARE1			0x0A0 0x290 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_35_SAI3_RX_BCLK			0x0A0 0x290 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_35_CSI_DATA18				0x0A0 0x290 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_35_GPIO3_IO21				0x0A0 0x290 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_35_USDHC1_CD_B				0x0A0 0x290 0x5D4 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_36_SEMC_DA14				0x0A4 0x294 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_36_XBAR_INOUT22			0x0A4 0x294 0x638 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_36_GPT1_COMPARE2			0x0A4 0x294 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_36_SAI3_TX_DATA			0x0A4 0x294 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_36_CSI_DATA17				0x0A4 0x294 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_36_GPIO3_IO22				0x0A4 0x294 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_36_USDHC1_WP				0x0A4 0x294 0x5D8 0x6 0x1
+
+#define MXRT1050_IOMUXC_GPIO_EMC_37_SEMC_DA15				0x0A8 0x298 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_37_XBAR_INOUT23			0x0A8 0x298 0x63C 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_37_GPT1_COMPARE3			0x0A8 0x298 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_37_SAI3_MCLK				0x0A8 0x298 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_37_CSI_DATA16				0x0A8 0x298 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_37_GPIO3_IO23				0x0A8 0x298 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_37_USDHC2_WP				0x0A8 0x298 0x608 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_38_SEMC_DM01				0x0AC 0x29C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_38_FLEXPWM1_PWM3_A			0x0AC 0x29C 0x454 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_EMC_38_LPUART8_TXD				0x0AC 0x29C 0x564 0x2 0x2
+#define MXRT1050_IOMUXC_GPIO_EMC_38_SAI3_TX_BCLK			0x0AC 0x29C 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_38_CSI_FIELD				0x0AC 0x29C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_38_GPIO3_IO24				0x0AC 0x29C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_38_USDHC2_VSELECT			0x0AC 0x29C 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_39_SEMC_DQS				0x0B0 0x2A0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_39_FLEXPWM1_PWM3_B			0x0B0 0x2A0 0x464 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_EMC_39_LPUART8_RXD				0x0B0 0x2A0 0x560 0x2 0x2
+#define MXRT1050_IOMUXC_GPIO_EMC_39_SAI3_TX_SYNC			0x0B0 0x2A0 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_39_WDOG1_B				0x0B0 0x2A0 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_39_GPIO3_IO25				0x0B0 0x2A0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_39_USDHC2_CD_B				0x0B0 0x2A0 0x5E0 0x6 0x1
+
+#define MXRT1050_IOMUXC_GPIO_EMC_40_SEMC_RDY				0x0B4 0x2A4 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_40_GPT2_CAPTURE2			0x0B4 0x2A4 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_40_LPSPI1_PCS2				0x0B4 0x2A4 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_40_USB_OTG2_OC				0x0B4 0x2A4 0x5CC 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_40_ENET_MDC				0x0B4 0x2A4 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_40_GPIO3_IO26				0x0B4 0x2A4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_40_USDHC2_RESET_B			0x0B4 0x2A4 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_41_SEMC_CSX0				0x0B8 0x2A8 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_41_GPT2_CAPTURE1			0x0B8 0x2A8 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_41_LPSPI1_PCS3				0x0B8 0x2A8 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_41_USB_OTG2_PWR			0x0B8 0x2A8 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_41_ENET_MDIO				0x0B8 0x2A8 0x430 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_41_GPIO3_IO27				0x0B8 0x2A8 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_41_USDHC2_VSELECT			0x0B8 0x2A8 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_FLEXPWM2_PWM3_A			0x0BC 0x2AC 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_XBAR_INOUT14			0x0BC 0x2AC 0x644 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_REF_CLK_32K			0x0BC 0x2AC 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_USB_OTG2_ID			0x0BC 0x2AC 0x3F8 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_LPI2C1_SCLS			0x0BC 0x2AC 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_GPIO1_IO00			0x0BC 0x2AC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_USDHC1_RESET_B			0x0BC 0x2AC 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_LPSPI3_SCK			0x0BC 0x2AC 0x510 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_FLEXPWM2_PWM3_B			0x0C0 0x2B0 0x484 0x0 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_XBAR_INOUT15			0x0C0 0x2B0 0x648 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_REF_CLK_24M			0x0C0 0x2B0 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_USB_OTG1_ID			0x0C0 0x2B0 0x3F4 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_LPI2C1_SDAS			0x0C0 0x2B0 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_GPIO1_IO01			0x0C0 0x2B0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_EWM_OUT_B				0x0C0 0x2B0 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_LPSPI3_SDO			0x0C0 0x2B0 0x518 0x7 0x1
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_FLEXCAN2_TX			0x0C4 0x2B4 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_XBAR_INOUT16			0x0C4 0x2B4 0x64C 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_LPUART6_TXD			0x0C4 0x2B4 0x554 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_USB_OTG1_PWR			0x0C4 0x2B4 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_FLEXPWM1_PWM0_X			0x0C4 0x2B4 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_GPIO1_IO02			0x0C4 0x2B4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_LPI2C1_HREQ			0x0C4 0x2B4 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_LPSPI3_SDI			0x0C4 0x2B4 0x514 0x7 0x1
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_FLEXCAN2_RX			0x0C8 0x2B8 0x450 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_XBAR_INOUT17			0x0C8 0x2B8 0x62C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_LPUART6_RXD			0x0C8 0x2B8 0x550 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_USB_OTG1_OC			0x0C8 0x2B8 0x5D0 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_FLEXPWM1_PWM1_X			0x0C8 0x2B8 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_GPIO1_IO03			0x0C8 0x2B8 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_REF_CLK_24M			0x0C8 0x2B8 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_LPSPI3_PCS0			0x0C8 0x2B8 0x50C 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_SRC_BOOT_MODE00			0x0CC 0x2BC 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_MQS_RIGHT				0x0CC 0x2BC 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_ENET_TX_DATA03			0x0CC 0x2BC 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_SAI2_TX_SYNC			0x0CC 0x2BC 0x5C4 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_CSI_DATA09			0x0CC 0x2BC 0x41C 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_GPIO1_IO04			0x0CC 0x2BC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_PIT_TRIGGER00			0x0CC 0x2BC 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_LPSPI3_PCS1			0x0CC 0x2BC 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_SRC_BOOT_MODE01			0x0D0 0x2C0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_MQS_LEFT				0x0D0 0x2C0 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_ENET_TX_DATA02			0x0D0 0x2C0 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_SAI2_TX_BCLK			0x0D0 0x2C0 0x5C0 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_CSI_DATA08			0x0D0 0x2C0 0x418 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_GPIO1_IO05			0x0D0 0x2C0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_XBAR_INOUT17			0x0D0 0x2C0 0x62C 0x6 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_LPSPI3_PCS2			0x0D0 0x2C0 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_JTAG_TMS				0x0D4 0x2C4 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_GPT2_COMPARE1			0x0D4 0x2C4 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_ENET_RX_CLK			0x0D4 0x2C4 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_SAI2_RX_BCLK			0x0D4 0x2C4 0x5B4 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_CSI_DATA07			0x0D4 0x2C4 0x414 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_GPIO1_IO06			0x0D4 0x2C4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_XBAR_INOUT18			0x0D4 0x2C4 0x630 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_LPSPI3_PCS3			0x0D4 0x2C4 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_JTAG_TCK				0x0D8 0x2C8 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_GPT2_COMPARE2			0x0D8 0x2C8 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_ENET_TX_ER			0x0D8 0x2C8 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_SAI2_RX_SYNC			0x0D8 0x2C8 0x5BC 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_CSI_DATA06			0x0D8 0x2C8 0x410 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_GPIO1_IO07			0x0D8 0x2C8 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_XBAR_INOUT19			0x0D8 0x2C8 0x654 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_ENET_1588_EVENT3_OUT		0x0D8 0x2C8 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_JTAG_MOD				0x0DC 0x2CC 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_GPT2_COMPARE3			0x0DC 0x2CC 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_ENET_RX_DATA03			0x0DC 0x2CC 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_SAI2_RX_DATA			0x0DC 0x2CC 0x5B8 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_CSI_DATA05			0x0DC 0x2CC 0x40C 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_GPIO1_IO08			0x0DC 0x2CC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_XBAR_INOUT20			0x0DC 0x2CC 0x634 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_ENET_1588_EVENT3_IN		0x0DC 0x2CC 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_JTAG_TDI				0x0E0 0x2D0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_FLEXPWM2_PWM3_A			0x0E0 0x2D0 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_ENET_RX_DATA02			0x0E0 0x2D0 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_SAI2_TX_DATA			0x0E0 0x2D0 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_CSI_DATA04			0x0E0 0x2D0 0x408 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_GPIO1_IO09			0x0E0 0x2D0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_XBAR_INOUT21			0x0E0 0x2D0 0x658 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_GPT2_CLK				0x0E0 0x2D0 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_JTAG_TDO				0x0E4 0x2D4 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_FLEXPWM1_PWM3_A			0x0E4 0x2D4 0x454 0x1 0x3
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_ENET_CRS				0x0E4 0x2D4 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_SAI2_MCLK				0x0E4 0x2D4 0x5B0 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_CSI_DATA03			0x0E4 0x2D4 0x404 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_GPIO1_IO10			0x0E4 0x2D4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_XBAR_INOUT22			0x0E4 0x2D4 0x638 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_ENET_1588_EVENT0_OUT		0x0E4 0x2D4 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_JTAG_TRSTB			0x0E8 0x2D8 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_FLEXPWM1_PWM3_B			0x0E8 0x2D8 0x464 0x1 0x3
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_ENET_COL				0x0E8 0x2D8 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_WDOG1_B				0x0E8 0x2D8 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_CSI_DATA02			0x0E8 0x2D8 0x400 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_GPIO1_IO11			0x0E8 0x2D8 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_XBAR_INOUT23			0x0E8 0x2D8 0x63C 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_ENET_1588_EVENT0_IN		0x0E8 0x2D8 0x444 0x7 0x1
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_LPI2C4_SCL			0x0EC 0x2DC 0x4E4 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_CCM_PMIC_READY			0x0EC 0x2DC 0x3FC 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_LPUART1_TXD			0x0EC 0x2DC 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_WDOG2_B				0x0EC 0x2DC 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_FLEXPWM1_PWM2_X			0x0EC 0x2DC 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_GPIO1_IO12			0x0EC 0x2DC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_ENET_1588_EVENT1_OUT		0x0EC 0x2DC 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_NMI				0x0EC 0x2DC 0x568 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_LPI2C4_SDA			0x0F0 0x2E0 0x4E8 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_GPT1_CLK				0x0F0 0x2E0 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_LPUART1_RXD			0x0F0 0x2E0 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_EWM_OUT_B				0x0F0 0x2E0 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_FLEXPWM1_PWM3_X			0x0F0 0x2E0 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_GPIO1_IO13			0x0F0 0x2E0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_ENET_1588_EVENT1_IN		0x0F0 0x2E0 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_REF_CLK_24M			0x0F0 0x2E0 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_14_USB_OTG2_OC			0x0F4 0x2E4 0x5CC 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_14_XBAR_INOUT24			0x0F4 0x2E4 0x640 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_14_LPUART1_CTS_B			0x0F4 0x2E4 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_14_ENET_1588_EVENT0_OUT		0x0F4 0x2E4 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_14_CSI_VSYNC				0x0F4 0x2E4 0x428 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_14_GPIO1_IO14			0x0F4 0x2E4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_14_FLEXCAN2_TX			0x0F4 0x2E4 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_USB_OTG2_PWR			0x0F8 0x2E8 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_XBAR_INOUT25			0x0F8 0x2E8 0x650 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_LPUART1_RTS_B			0x0F8 0x2E8 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_ENET_1588_EVENT0_IN		0x0F8 0x2E8 0x444 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_CSI_HSYNC				0x0F8 0x2E8 0x420 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_GPIO1_IO15			0x0F8 0x2E8 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_FLEXCAN2_RX			0x0F8 0x2E8 0x450 0x6 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_WDOG1_WDOG_RST_B_DEB		0x0F8 0x2E8 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_USB_OTG2_ID			0x0FC 0x2EC 0x3F8 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_TMR3_TIMER0			0x0FC 0x2EC 0x57C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_LPUART2_CTS_B			0x0FC 0x2EC 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_LPI2C1_SCL			0x0FC 0x2EC 0x4CC 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_WDOG1_B				0x0FC 0x2EC 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_GPIO1_IO16			0x0FC 0x2EC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_USDHC1_WP				0x0FC 0x2EC 0x5D8 0x6 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_KPP_ROW07				0x0FC 0x2EC 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_USB_OTG1_PWR			0x100 0x2F0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_TMR3_TIMER1			0x100 0x2F0 0x580 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_LPUART2_RTS_B			0x100 0x2F0 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_LPI2C1_SDA			0x100 0x2F0 0x4D0 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_CCM_PMIC_READY			0x100 0x2F0 0x3FC 0x4 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_GPIO1_IO17			0x100 0x2F0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_USDHC1_VSELECT			0x100 0x2F0 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_KPP_COL07				0x100 0x2F0 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_USB_OTG1_ID			0x104 0x2F4 0x3F4 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_TMR3_TIMER2			0x104 0x2F4 0x584 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_LPUART2_TXD			0x104 0x2F4 0x530 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_SPDIF_OUT				0x104 0x2F4 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_ENET_1588_EVENT2_OUT		0x104 0x2F4 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_GPIO1_IO18			0x104 0x2F4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_USDHC1_CD_B			0x104 0x2F4 0x5D4 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_KPP_ROW06				0x104 0x2F4 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_USB_OTG1_OC			0x108 0x2F8 0x5D0 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_TMR3_TIMER3			0x108 0x2F8 0x588 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_LPUART2_RXD			0x108 0x2F8 0x52C 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_SPDIF_IN				0x108 0x2F8 0x5C8 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_ENET_1588_EVENT2_IN		0x108 0x2F8 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_GPIO1_IO19			0x108 0x2F8 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_USDHC2_CD_B			0x108 0x2F8 0x5E0 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_KPP_COL06				0x108 0x2F8 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_FLEXSPI_B_DATA3			0x10C 0x2FC 0x4C4 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_ENET_MDC				0x10C 0x2FC 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_LPUART3_CTS_B			0x10C 0x2FC 0x534 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_SPDIF_SR_CLK			0x10C 0x2FC 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_CSI_PIXCLK			0x10C 0x2FC 0x424 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_GPIO1_IO20			0x10C 0x2FC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_USDHC2_DATA0			0x10C 0x2FC 0x5E8 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_KPP_ROW05				0x10C 0x2FC 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_FLEXSPI_B_DATA2			0x110 0x300 0x4C0 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_ENET_MDIO				0x110 0x300 0x430 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_LPUART3_RTS_B			0x110 0x300 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_SPDIF_OUT				0x110 0x300 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_CSI_MCLK				0x110 0x300 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_GPIO1_IO21			0x110 0x300 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_USDHC2_DATA1			0x110 0x300 0x5EC 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_KPP_COL05				0x110 0x300 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_FLEXSPI_B_DATA1			0x114 0x304 0x4BC 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_LPI2C3_SDA			0x114 0x304 0x4E0 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_LPUART3_TXD			0x114 0x304 0x53C 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_SPDIF_LOCK			0x114 0x304 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_CSI_VSYNC				0x114 0x304 0x428 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_GPIO1_IO22			0x114 0x304 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_USDHC2_DATA2			0x114 0x304 0x5F0 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_KPP_ROW04				0x114 0x304 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_FLEXSPI_B_DATA0			0x118 0x308 0x4B8 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_LPI2C3_SCL			0x118 0x308 0x4DC 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_LPUART3_RXD			0x118 0x308 0x538 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_SPDIF_EXT_CLK			0x118 0x308 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_CSI_HSYNC				0x118 0x308 0x420 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_GPIO1_IO23			0x118 0x308 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_USDHC2_DATA3			0x118 0x308 0x5F4 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_KPP_COL04				0x118 0x308 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_FLEXSPI_A_SS1_B			0x11C 0x30C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_FLEXPWM4_PWM0_A			0x11C 0x30C 0x494 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_FLEXCAN1_TX			0x11C 0x30C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_CCM_PMIC_READY			0x11C 0x30C 0x3FC 0x3 0x3
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_CSI_DATA09			0x11C 0x30C 0x41C 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_GPIO1_IO24			0x11C 0x30C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_USDHC2_CMD			0x11C 0x30C 0x5E4 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_KPP_ROW03				0x11C 0x30C 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_FLEXSPI_A_DQS			0x120 0x310 0x4A4 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_FLEXPWM4_PWM1_A			0x120 0x310 0x498 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_FLEXCAN1_RX			0x120 0x310 0x44C 0x2 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_SAI1_MCLK				0x120 0x310 0x58C 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_CSI_DATA08			0x120 0x310 0x418 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_GPIO1_IO25			0x120 0x310 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_USDHC2_CLK			0x120 0x310 0x5DC 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_KPP_COL03				0x120 0x310 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_FLEXSPI_A_DATA3			0x124 0x314 0x4B4 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_WDOG1_B				0x124 0x314 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_LPUART8_TXD			0x124 0x314 0x564 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_SAI1_RX_SYNC			0x124 0x314 0x5A4 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_CSI_DATA07			0x124 0x314 0x414 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_GPIO1_IO26			0x124 0x314 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_USDHC2_WP				0x124 0x314 0x608 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_KPP_ROW02				0x124 0x314 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_FLEXSPI_A_DATA2			0x128 0x318 0x4B0 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_EWM_OUT_B				0x128 0x318 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_LPUART8_RXD			0x128 0x318 0x560 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_SAI1_RX_BCLK			0x128 0x318 0x590 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_CSI_DATA06			0x128 0x318 0x410 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_GPIO1_IO27			0x128 0x318 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_USDHC2_RESET_B			0x128 0x318 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_KPP_COL02				0x128 0x318 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_FLEXSPI_A_DATA1			0x12C 0x31C 0x4AC 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_ACMP1_OUT				0x12C 0x31C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_LPSPI3_PCS0			0x12C 0x31C 0x50C 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_SAI1_RX_DATA00			0x12C 0x31C 0x594 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_CSI_DATA05			0x12C 0x31C 0x40C 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_GPIO1_IO28			0x12C 0x31C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_USDHC2_DATA4			0x12C 0x31C 0x5F8 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_KPP_ROW01				0x12C 0x31C 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_FLEXSPI_A_DATA0			0x130 0x320 0x4A8 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_ACMP2_OUT				0x130 0x320 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_LPSPI3_SDI			0x130 0x320 0x514 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_SAI1_TX_DATA00			0x130 0x320 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_CSI_DATA04			0x130 0x320 0x408 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_GPIO1_IO29			0x130 0x320 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_USDHC2_DATA5			0x130 0x320 0x5FC 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_KPP_COL01				0x130 0x320 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_FLEXSPI_A_SCLK			0x134 0x324 0x4C8 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_ACMP3_OUT				0x134 0x324 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_LPSPI3_SDO			0x134 0x324 0x518 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_SAI1_TX_BCLK			0x134 0x324 0x5A8 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_CSI_DATA03			0x134 0x324 0x404 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_GPIO1_IO30			0x134 0x324 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_USDHC2_DATA6			0x134 0x324 0x600 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_KPP_ROW00				0x134 0x324 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_FLEXSPI_A_SS0_B			0x138 0x328 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_ACMP4_OUT				0x138 0x328 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_LPSPI3_SCK			0x138 0x328 0x510 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_SAI1_TX_SYNC			0x138 0x328 0x5AC 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_CSI_DATA02			0x138 0x328 0x400 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_GPIO1_IO31			0x138 0x328 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_USDHC2_DATA7			0x138 0x328 0x604 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_KPP_COL00				0x138 0x328 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_00_LCD_CLK				0x13C 0x32C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_00_TMR1_TIMER0				0x13C 0x32C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_00_MQS_RIGHT				0x13C 0x32C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_00_LPSPI4_PCS0				0x13C 0x32C 0x51C 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_00_FLEXIO2_D00				0x13C 0x32C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_00_GPIO2_IO00				0x13C 0x32C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_00_SEMC_CSX1				0x13C 0x32C 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_01_LCD_ENABLE				0x140 0x330 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_01_TMR1_TIMER1				0x140 0x330 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_01_MQS_LEFT				0x140 0x330 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_01_LPSPI4_SDI				0x140 0x330 0x524 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_01_FLEXIO2_D01				0x140 0x330 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_01_GPIO2_IO01				0x140 0x330 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_01_SEMC_CSX2				0x140 0x330 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_02_LCD_HSYNC				0x144 0x334 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_02_TMR1_TIMER2				0x144 0x334 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_02_FLEXCAN1_TX				0x144 0x334 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_02_LPSPI4_SDO				0x144 0x334 0x528 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_02_FLEXIO2_D02				0x144 0x334 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_02_GPIO2_IO02				0x144 0x334 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_02_SEMC_CSX3				0x144 0x334 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_03_LCD_VSYNC				0x148 0x338 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_03_TMR2_TIMER0				0x148 0x338 0x56C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_03_FLEXCAN1_RX				0x148 0x338 0x44C 0x2 0x3
+#define MXRT1050_IOMUXC_GPIO_B0_03_LPSPI4_SCK				0x148 0x338 0x520 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_03_FLEXIO2_D03				0x148 0x338 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_03_GPIO2_IO03				0x148 0x338 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_03_WDOG2_RESET_B_DEB			0x148 0x338 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_04_LCD_DATA00				0x14C 0x33C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_04_TMR2_TIMER1				0x14C 0x33C 0x570 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_04_LPI2C2_SCL				0x14C 0x33C 0x4D4 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_04_ARM_TRACE00				0x14C 0x33C 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_04_FLEXIO2_D04				0x14C 0x33C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_04_GPIO2_IO04				0x14C 0x33C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_04_SRC_BT_CFG00				0x14C 0x33C 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_05_LCD_DATA01				0x150 0x340 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_05_TMR2_TIMER2				0x150 0x340 0x574 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_05_LPI2C2_SDA				0x150 0x340 0x4D8 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_05_ARM_TRACE01				0x150 0x340 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_05_FLEXIO2_D05				0x150 0x340 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_05_GPIO2_IO05				0x150 0x340 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_05_SRC_BT_CFG01				0x150 0x340 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_06_LCD_DATA02				0x154 0x344 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_06_TMR3_TIMER0				0x154 0x344 0x57C 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_06_FLEXPWM2_PWM0_A			0x154 0x344 0x478 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_06_ARM_TRACE02				0x154 0x344 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_06_FLEXIO2_D06				0x154 0x344 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_06_GPIO2_IO06				0x154 0x344 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_06_SRC_BT_CFG02				0x154 0x344 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_07_LCD_DATA03				0x158 0x348 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_07_TMR3_TIMER1				0x158 0x348 0x580 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_07_FLEXPWM2_PWM0_B			0x158 0x348 0x488 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_07_ARM_TRACE03				0x158 0x348 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_07_FLEXIO2_D07				0x158 0x348 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_07_GPIO2_IO07				0x158 0x348 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_07_SRC_BT_CFG03				0x158 0x348 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_08_LCD_DATA04				0x15C 0x34C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_08_TMR3_TIMER2				0x15C 0x34C 0x584 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_08_FLEXPWM2_PWM1_A			0x15C 0x34C 0x47C 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_08_LPUART3_TXD				0x15C 0x34C 0x53C 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_08_FLEXIO2_D08				0x15C 0x34C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_08_GPIO2_IO08				0x15C 0x34C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_08_SRC_BT_CFG04				0x15C 0x34C 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_09_LCD_DATA05				0x160 0x350 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_09_TMR4_TIMER0				0x160 0x350 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_09_FLEXPWM2_PWM1_B			0x160 0x350 0x48C 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_09_LPUART3_RXD				0x160 0x350 0x538 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_09_FLEXIO2_D09				0x160 0x350 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_09_GPIO2_IO09				0x160 0x350 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_09_SRC_BT_CFG05				0x160 0x350 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_10_LCD_DATA06				0x164 0x354 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_10_TMR4_TIMER1				0x164 0x354 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_10_FLEXPWM2_PWM2_A			0x164 0x354 0x480 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_10_SAI1_TX_DATA03			0x164 0x354 0x598 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_10_FLEXIO2_D10				0x164 0x354 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_10_GPIO2_IO10				0x164 0x354 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_10_SRC_BT_CFG06				0x164 0x354 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_11_LCD_DATA07				0x168 0x358 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_11_TMR4_TIMER2				0x168 0x358 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_11_FLEXPWM2_PWM2_B			0x168 0x358 0x490 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_11_SAI1_TX_DATA02			0x168 0x358 0x59C 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_11_FLEXIO2_D11				0x168 0x358 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_11_GPIO2_IO11				0x168 0x358 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_11_SRC_BT_CFG07				0x168 0x358 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_12_LCD_DATA08				0x16C 0x35C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_12_XBAR_INOUT10				0x16C 0x35C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_12_ARM_TRACE_CLK			0x16C 0x35C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_12_SAI1_TX_DATA01			0x16C 0x35C 0x5A0 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_12_FLEXIO2_D12				0x16C 0x35C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_12_GPIO2_IO12				0x16C 0x35C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_12_SRC_BT_CFG08				0x16C 0x35C 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_13_LCD_DATA09				0x170 0x360 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_13_XBAR_INOUT11				0x170 0x360 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_13_ARM_TRACE_SWO			0x170 0x360 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_13_SAI1_MCLK				0x170 0x360 0x58C 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_13_FLEXIO2_D13				0x170 0x360 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_13_GPIO2_IO13				0x170 0x360 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_13_SRC_BT_CFG09				0x170 0x360 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_14_LCD_DATA10				0x174 0x364 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_14_XBAR_INOUT12				0x174 0x364 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_14_ARM_CM7_TXEV				0x174 0x364 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_14_SAI1_RX_SYNC				0x174 0x364 0x5A4 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_14_FLEXIO2_D14				0x174 0x364 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_14_GPIO2_IO14				0x174 0x364 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_14_SRC_BT_CFG10				0x174 0x364 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_15_LCD_DATA11				0x178 0x368 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_15_XBAR_INOUT13				0x178 0x368 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_15_ARM_CM7_RXEV				0x178 0x368 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_15_SAI1_RX_BCLK				0x178 0x368 0x590 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_15_FLEXIO2_D15				0x178 0x368 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_15_GPIO2_IO15				0x178 0x368 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_15_SRC_BT_CFG11				0x178 0x368 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_00_LCD_DATA12				0x17C 0x36C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_00_XBAR_INOUT14				0x17C 0x36C 0x644 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_00_LPUART4_TXD				0x17C 0x36C 0x544 0x2 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_00_SAI1_RX_DATA00			0x17C 0x36C 0x594 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_00_FLEXIO2_D16				0x17C 0x36C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_00_GPIO2_IO16				0x17C 0x36C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_00_FLEXPWM1_PWM3_A			0x17C 0x36C 0x454 0x6 0x4
+
+#define MXRT1050_IOMUXC_GPIO_B1_01_LCD_DATA13				0x180 0x370 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_01_XBAR_INOUT15				0x180 0x370 0x648 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_01_LPUART4_RXD				0x180 0x370 0x540 0x2 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_01_SAI1_TX_DATA00			0x180 0x370 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_01_FLEXIO2_D17				0x180 0x370 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_01_GPIO2_IO17				0x180 0x370 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_01_FLEXPWM1_PWM3_B			0x180 0x370 0x464 0x6 0x4
+
+#define MXRT1050_IOMUXC_GPIO_B1_02_LCD_DATA14				0x184 0x374 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_02_XBAR_INOUT16				0x184 0x374 0x64C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_02_LPSPI4_PCS2				0x184 0x374 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_02_SAI1_TX_BCLK				0x184 0x374 0x5A8 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_02_FLEXIO2_D18				0x184 0x374 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_02_GPIO2_IO18				0x184 0x374 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_02_FLEXPWM2_PWM3_A			0x184 0x374 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_03_LCD_DATA15				0x188 0x378 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_03_XBAR_INOUT17				0x188 0x378 0x62C 0x1 0x3
+#define MXRT1050_IOMUXC_GPIO_B1_03_LPSPI4_PCS1				0x188 0x378 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_03_SAI1_TX_SYNC				0x188 0x378 0x5AC 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_03_FLEXIO2_D19				0x188 0x378 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_03_GPIO2_IO19				0x188 0x378 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_03_FLEXPWM2_PWM3_B			0x188 0x378 0x484 0x6 0x3
+
+#define MXRT1050_IOMUXC_GPIO_B1_04_LCD_DATA16				0x18C 0x37C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_04_LPSPI4_PCS0				0x18C 0x37C 0x51C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_04_CSI_DATA15				0x18C 0x37C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_04_ENET_RX_DATA00			0x18C 0x37C 0x434 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_04_FLEXIO2_D20				0x18C 0x37C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_04_GPIO2_IO20				0x18C 0x37C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_05_LCD_DATA17				0x190 0x380 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_05_LPSPI4_SDI				0x190 0x380 0x524 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_05_CSI_DATA14				0x190 0x380 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_05_ENET_RX_DATA01			0x190 0x380 0x438 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_05_FLEXIO2_D21				0x190 0x380 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_05_GPIO2_IO21				0x190 0x380 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_06_LCD_DATA18				0x194 0x384 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_06_LPSPI4_SDO				0x194 0x384 0x528 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_06_CSI_DATA13				0x194 0x384 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_06_ENET_RX_EN				0x194 0x384 0x43C 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_06_FLEXIO2_D22				0x194 0x384 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_06_GPIO2_IO22				0x194 0x384 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_07_LCD_DATA19				0x198 0x388 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_07_LPSPI4_SCK				0x198 0x388 0x520 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_07_CSI_DATA12				0x198 0x388 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_07_ENET_TX_DATA00			0x198 0x388 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_07_FLEXIO2_D23				0x198 0x388 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_07_GPIO2_IO23				0x198 0x388 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_08_LCD_DATA20				0x19C 0x38C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_08_TMR1_TIMER3				0x19C 0x38C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_08_CSI_DATA11				0x19C 0x38C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_08_ENET_TX_DATA01			0x19C 0x38C 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_08_FLEXIO2_D24				0x19C 0x38C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_08_GPIO2_IO24				0x19C 0x38C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_08_FLEXCAN2_TX				0x19C 0x38C 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_09_LCD_DATA21				0x1A0 0x390 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_09_TMR2_TIMER3				0x1A0 0x390 0x578 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_09_CSI_DATA10				0x1A0 0x390 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_09_ENET_TX_EN				0x1A0 0x390 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_09_FLEXIO2_D25				0x1A0 0x390 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_09_GPIO2_IO25				0x1A0 0x390 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_09_FLEXCAN2_RX				0x1A0 0x390 0x450 0x6 0x3
+
+#define MXRT1050_IOMUXC_GPIO_B1_10_LCD_DATA22				0x1A4 0x394 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_10_TMR3_TIMER3				0x1A4 0x394 0x588 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_10_CSI_DATA00				0x1A4 0x394 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_10_ENET_TX_CLK				0x1A4 0x394 0x448 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_10_FLEXIO2_D26				0x1A4 0x394 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_10_GPIO2_IO26				0x1A4 0x394 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_10_ENET_REF_CLK				0x1A4 0x394 0x42C 0x6 0x1
+
+#define MXRT1050_IOMUXC_GPIO_B1_11_LCD_DATA23				0x1A8 0x398 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_11_TMR4_TIMER3				0x1A8 0x398 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_11_CSI_DATA01				0x1A8 0x398 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_11_ENET_RX_ER				0x1A8 0x398 0x440 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_11_FLEXIO2_D27				0x1A8 0x398 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_11_GPIO2_IO27				0x1A8 0x398 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_11_LPSPI4_PCS3				0x1A8 0x398 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_12_LPUART5_TXD				0x1AC 0x39C 0x54C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_12_CSI_PIXCLK				0x1AC 0x39C 0x424 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_12_ENET_1588_EVENT0_IN			0x1AC 0x39C 0x444 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_12_FLEXIO2_D28				0x1AC 0x39C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_12_GPIO2_IO28				0x1AC 0x39C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_12_USDHC1_CD_B				0x1AC 0x39C 0x5D4 0x6 0x2
+
+#define MXRT1050_IOMUXC_GPIO_B1_13_WDOG1_B				0x1B0 0x3A0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_13_LPUART5_RXD				0x1B0 0x3A0 0x548 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_13_CSI_VSYNC				0x1B0 0x3A0 0x428 0x2 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_13_ENET_1588_EVENT0_OUT			0x1B0 0x3A0 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_13_FLEXIO2_D29				0x1B0 0x3A0 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_13_GPIO2_IO29				0x1B0 0x3A0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_13_USDHC1_WP				0x1B0 0x3A0 0x5D8 0x6 0x3
+
+#define MXRT1050_IOMUXC_GPIO_B1_14_ENET_MDC				0x1B4 0x3A4 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_14_FLEXPWM4_PWM2_A			0x1B4 0x3A4 0x49C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_14_CSI_HSYNC				0x1B4 0x3A4 0x420 0x2 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_14_XBAR_INOUT02				0x1B4 0x3A4 0x60C 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_14_FLEXIO2_D30				0x1B4 0x3A4 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_14_GPIO2_IO30				0x1B4 0x3A4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_14_USDHC1_VSELECT			0x1B4 0x3A4 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_15_ENET_MDIO				0x1B8 0x3A8 0x430 0x0 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_15_FLEXPWM4_PWM3_A			0x1B8 0x3A8 0x4A0 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_15_CSI_MCLK				0x1B8 0x3A8 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_15_XBAR_INOUT03				0x1B8 0x3A8 0x610 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_15_FLEXIO2_D31				0x1B8 0x3A8 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_15_GPIO2_IO31				0x1B8 0x3A8 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_15_USDHC1_RESET_B			0x1B8 0x3A8 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B0_00_USDHC1_CMD			0x1BC 0x3AC 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_00_FLEXPWM1_PWM0_A			0x1BC 0x3AC 0x458 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_00_LPI2C3_SCL			0x1BC 0x3AC 0x4DC 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_00_XBAR_INOUT04			0x1BC 0x3AC 0x614 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_00_LPSPI1_SCK			0x1BC 0x3AC 0x4F0 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_00_GPIO3_IO12			0x1BC 0x3AC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_00_FLEXSPI_A_SS1_B			0x1BC 0x3AC 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B0_01_USDHC1_CLK			0x1C0 0x3B0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_01_FLEXPWM1_PWM0_B			0x1C0 0x3B0 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_01_LPI2C3_SDA			0x1C0 0x3B0 0x4E0 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_01_XBAR_INOUT05			0x1C0 0x3B0 0x618 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_01_LPSPI1_PCS0			0x1C0 0x3B0 0x4EC 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_01_GPIO3_IO13			0x1C0 0x3B0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_01_FLEXSPI_B_SS1_B			0x1C0 0x3B0 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0			0x1C4 0x3B4 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_02_FLEXPWM1_PWM1_A			0x1C4 0x3B4 0x45C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_02_LPUART8_CTS_B			0x1C4 0x3B4 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_02_XBAR_INOUT06			0x1C4 0x3B4 0x61C 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_02_LPSPI1_SDO			0x1C4 0x3B4 0x4F8 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_02_GPIO3_IO14			0x1C4 0x3B4 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1			0x1C8 0x3B8 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_03_FLEXPWM1_PWM1_B			0x1C8 0x3B8 0x46C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_03_LPUART8_RTS_B			0x1C8 0x3B8 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_03_XBAR_INOUT07			0x1C8 0x3B8 0x620 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_03_LPSPI1_SDI			0x1C8 0x3B8 0x4F4 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_03_GPIO3_IO15			0x1C8 0x3B8 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2			0x1CC 0x3BC 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_04_FLEXPWM1_PWM2_A			0x1CC 0x3BC 0x460 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_04_LPUART8_TXD			0x1CC 0x3BC 0x564 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_04_XBAR_INOUT08			0x1CC 0x3BC 0x624 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_04_FLEXSPI_B_SS0_B			0x1CC 0x3BC 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_04_GPIO3_IO16			0x1CC 0x3BC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_04_CCM_CLKO1				0x1CC 0x3BC 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3			0x1D0 0x3C0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_05_FLEXPWM1_PWM2_B			0x1D0 0x3C0 0x470 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_05_LPUART8_RXD			0x1D0 0x3C0 0x560 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_05_XBAR_INOUT09			0x1D0 0x3C0 0x628 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_05_FLEXSPI_B_DQS			0x1D0 0x3C0 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_05_GPIO3_IO17			0x1D0 0x3C0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_05_CCM_CLKO2				0x1D0 0x3C0 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_00_USDHC2_DATA3			0x1D4 0x3C4 0x5F4 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_00_FLEXSPI_B_DATA3			0x1D4 0x3C4 0x4C4 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_00_FLEXPWM1_PWM3_A			0x1D4 0x3C4 0x454 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_00_SAI1_TX_DATA03			0x1D4 0x3C4 0x598 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_00_LPUART4_TXD			0x1D4 0x3C4 0x544 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_00_GPIO3_IO00			0x1D4 0x3C4 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_01_USDHC2_DATA2			0x1D8 0x3C8 0x5F0 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_01_FLEXSPI_B_DATA2			0x1D8 0x3C8 0x4C0 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_01_FLEXPWM1_PWM3_B			0x1D8 0x3C8 0x464 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_01_SAI1_TX_DATA02			0x1D8 0x3C8 0x59C 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_01_LPUART4_RXD			0x1D8 0x3C8 0x540 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_01_GPIO3_IO01			0x1D8 0x3C8 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_02_USDHC2_DATA1			0x1DC 0x3CC 0x5EC 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_02_FLEXSPI_B_DATA1			0x1DC 0x3CC 0x4BC 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_02_FLEXPWM2_PWM3_A			0x1DC 0x3CC 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_02_SAI1_TX_DATA01			0x1DC 0x3CC 0x5A0 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_02_FLEXCAN1_TX			0x1DC 0x3CC 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_02_GPIO3_IO02			0x1DC 0x3CC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_02_CCM_WAIT				0x1DC 0x3CC 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_03_USDHC2_DATA0			0x1E0 0x3D0 0x5E8 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_03_FLEXSPI_B_DATA0			0x1E0 0x3D0 0x4B8 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_03_FLEXPWM2_PWM3_B			0x1E0 0x3D0 0x484 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_03_SAI1_MCLK				0x1E0 0x3D0 0x58C 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_03_FLEXCAN1_RX			0x1E0 0x3D0 0x44C 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_03_GPIO3_IO03			0x1E0 0x3D0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_03_CCM_PMIC_READY			0x1E0 0x3D0 0x3FC 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_04_USDHC2_CLK			0x1E4 0x3D4 0x5DC 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_04_FLEXSPI_B_SCLK			0x1E4 0x3D4 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_04_LPI2C1_SCL			0x1E4 0x3D4 0x4CC 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_04_SAI1_RX_SYNC			0x1E4 0x3D4 0x5A4 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_04_FLEXCAN1_A_SS1_B			0x1E4 0x3D4 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_04_GPIO3_IO04			0x1E4 0x3D4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_04_CCM_STOP				0x1E4 0x3D4 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_05_USDHC2_CMD			0x1E8 0x3D8 0x5E4 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_05_FLEXSPI_A_DQS			0x1E8 0x3D8 0x4A4 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_05_LPI2C1_SDA			0x1E8 0x3D8 0x4D0 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_05_SAI1_RX_BCLK			0x1E8 0x3D8 0x590 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_05_FLEXCAN1_B_SS0_B			0x1E8 0x3D8 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_05_GPIO3_IO05			0x1E8 0x3D8 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_06_USDHC2_RESET_B			0x1EC 0x3DC 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_06_FLEXSPI_A_SS0_B			0x1EC 0x3DC 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_06_LPUART7_CTS_B			0x1EC 0x3DC 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_06_SAI1_RX_DATA00			0x1EC 0x3DC 0x594 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_06_LPSPI2_PCS0			0x1EC 0x3DC 0x4FC 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_06_GPIO3_IO06			0x1EC 0x3DC 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_07_SEMC_CSX1				0x1F0 0x3E0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_07_FLEXSPI_A_SCLK			0x1F0 0x3E0 0x4C8 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_07_LPUART7_RTS_B			0x1F0 0x3E0 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_07_SAI1_TX_DATA00			0x1F0 0x3E0 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_07_LPSPI2_SCK			0x1F0 0x3E0 0x500 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_07_GPIO3_IO07			0x1F0 0x3E0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_07_CCM_REF_EN_B			0x1F0 0x3E0 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_08_USDHC2_DATA4			0x1F4 0x3E4 0x5F8 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_08_FLEXSPI_A_DATA0			0x1F4 0x3E4 0x4A8 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_08_LPUART7_TXD			0x1F4 0x3E4 0x55C 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_08_SAI1_TX_BLCK			0x1F4 0x3E4 0x5A8 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_08_LPSPI2_SDO			0x1F4 0x3E4 0x508 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_08_GPIO3_IO08			0x1F4 0x3E4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_08_SEMC_CSX2				0x1F4 0x3E4 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_09_USDHC2_DATA5			0x1F8 0x3E8 0x5FC 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_09_FLEXSPI_A_DATA1			0x1F8 0x3E8 0x4AC 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_09_LPUART7_RXD			0x1F8 0x3E8 0x558 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_09_SAI1_TX_SYNC			0x1F8 0x3E8 0x5AC 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_09_LPSPI2_SDI			0x1F8 0x3E8 0x504 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_09_GPIO3_IO09			0x1F8 0x3E8 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_10_USDHC2_DATA6			0x1FC 0x3EC 0x600 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_10_FLEXSPI_A_DATA2			0x1FC 0x3EC 0x4B0 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_10_LPUART2_RXD			0x1FC 0x3EC 0x52C 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_10_LPI2C2_SDA			0x1FC 0x3EC 0x4D8 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_10_LPSPI2_PCS2			0x1FC 0x3EC 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_10_GPIO3_IO10			0x1FC 0x3EC 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_11_USDHC2_DATA7			0x200 0x3F0 0x604 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_11_FLEXSPI_A_DATA3			0x200 0x3F0 0x4B4 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_11_LPUART2_TXD			0x200 0x3F0 0x530 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_11_LPI2C2_SCL			0x200 0x3F0 0x4D4 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_11_LPSPI2_PCS3			0x200 0x3F0 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_11_GPIO3_IO11			0x200 0x3F0 0x000 0x5 0x0
+
+#endif /* _DT_BINDINGS_PINCTRL_IMXRT1050_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imxrt1050.dtsi b/arch/arm/boot/dts/imxrt1050.dtsi
new file mode 100644
index 000000000000..03e6a858a7be
--- /dev/null
+++ b/arch/arm/boot/dts/imxrt1050.dtsi
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019
+ * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
+ */
+
+#include "armv7-m.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/imxrt1050-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	clocks {
+		osc: osc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+		};
+
+		osc3M: osc3M {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <3000000>;
+		};
+	};
+
+	soc {
+		lpuart1: serial@40184000 {
+			compatible = "fsl,imxrt1050-lpuart", "fsl,imx7ulp-lpuart";
+			reg = <0x40184000 0x4000>;
+			interrupts = <20>;
+			clocks = <&clks IMXRT1050_CLK_LPUART1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		iomuxc: pinctrl@401f8000 {
+			compatible = "fsl,imxrt1050-iomuxc";
+			reg = <0x401f8000 0x4000>;
+			fsl,mux_mask = <0x7>;
+		};
+
+		anatop: anatop@400d8000 {
+			compatible = "fsl,imxrt-anatop";
+			reg = <0x400d8000 0x4000>;
+		};
+
+		clks: clock-controller@400fc000 {
+			compatible = "fsl,imxrt1050-ccm";
+			reg = <0x400fc000 0x4000>;
+			interrupts = <95>, <96>;
+			clocks = <&osc>;
+			clock-names = "osc";
+			#clock-cells = <1>;
+			assigned-clocks = <&clks IMXRT1050_CLK_PLL1_BYPASS>,
+				<&clks IMXRT1050_CLK_PLL1_BYPASS>,
+				<&clks IMXRT1050_CLK_PLL2_BYPASS>,
+				<&clks IMXRT1050_CLK_PLL3_BYPASS>,
+				<&clks IMXRT1050_CLK_PLL3_PFD1_664_62M>,
+				<&clks IMXRT1050_CLK_PLL2_PFD2_396M>;
+			assigned-clock-parents = <&clks IMXRT1050_CLK_PLL1_REF_SEL>,
+				<&clks IMXRT1050_CLK_PLL1_ARM>,
+				<&clks IMXRT1050_CLK_PLL2_SYS>,
+				<&clks IMXRT1050_CLK_PLL3_USB_OTG>,
+				<&clks IMXRT1050_CLK_PLL3_USB_OTG>,
+				<&clks IMXRT1050_CLK_PLL2_SYS>;
+		};
+
+		edma1: dma-controller@400e8000 {
+			#dma-cells = <2>;
+			compatible = "fsl,imx7ulp-edma";
+			reg = <0x400e8000 0x4000>,
+				<0x400ec000 0x4000>;
+			dma-channels = <32>;
+			interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>, <8>,
+				<9>, <10>, <11>, <12>, <13>, <14>, <15>, <16>;
+			clock-names = "dma", "dmamux0";
+			clocks = <&clks IMXRT1050_CLK_DMA>,
+				 <&clks IMXRT1050_CLK_DMA_MUX>;
+		};
+
+		usdhc1: mmc@402c0000 {
+			compatible = "fsl,imxrt1050-usdhc", "fsl,imx6sl-usdhc";
+			reg = <0x402c0000 0x4000>;
+			interrupts = <110>;
+			clocks = <&clks IMXRT1050_CLK_IPG_PDOF>,
+				<&clks IMXRT1050_CLK_OSC>,
+				<&clks IMXRT1050_CLK_USDHC1>;
+			clock-names = "ipg", "ahb", "per";
+			bus-width = <4>;
+			fsl,wp-controller;
+			no-1-8-v;
+			max-frequency = <4000000>;
+			fsl,tuning-start-tap = <20>;
+			fsl,tuning-step = <2>;
+			status = "disabled";
+		};
+
+		gpio1: gpio@401b8000 {
+			compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
+			reg = <0x401b8000 0x4000>;
+			interrupts = <80>, <81>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@401bc000 {
+			compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
+			reg = <0x401bc000 0x4000>;
+			interrupts = <82>, <83>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@401c0000 {
+			compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
+			reg = <0x401c0000 0x4000>;
+			interrupts = <84>, <85>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio@401c4000 {
+			compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
+			reg = <0x401c4000 0x4000>;
+			interrupts = <86>, <87>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio5: gpio@400c0000 {
+			compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
+			reg = <0x400c0000 0x4000>;
+			interrupts = <88>, <89>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpt: timer@401ec000 {
+			compatible = "fsl,imxrt1050-gpt", "fsl,imx6dl-gpt", "fsl,imx6sl-gpt";
+			reg = <0x401ec000 0x4000>;
+			interrupts = <100>;
+			clocks = <&osc3M>;
+			clock-names = "per";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imxrt1170-pinfunc.h b/arch/arm/boot/dts/imxrt1170-pinfunc.h
new file mode 100644
index 000000000000..3b9fff2f08e1
--- /dev/null
+++ b/arch/arm/boot/dts/imxrt1170-pinfunc.h
@@ -0,0 +1,1561 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (C) 2021
+ * Author(s): Jesse Taube <Mr.Bossman075@gmail.com>
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_IMXRT1170_PINFUNC_H
+#define _DT_BINDINGS_PINCTRL_IMXRT1170_PINFUNC_H
+
+#define IMX_PAD_SION		0x40000000
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+
+#define IOMUXC_GPIO_LPSR_00_FLEXCAN3_TX				0x000 0x040 0x0 0x0 0x0
+#define IOMUXC_GPIO_LPSR_00_MIC_CLK				0x000 0x040 0x0 0x1 0x0
+#define IOMUXC_GPIO_LPSR_00_MQS_RIGHT				0x000 0x040 0x0 0x2 0x0
+#define IOMUXC_GPIO_LPSR_00_ARM_CM4_EVENTO			0x000 0x040 0x0 0x3 0x0
+#define IOMUXC_GPIO_LPSR_00_GPIO_MUX6_IO00			0x000 0x040 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_00_LPUART12_TXD			0x000 0x040 0x0B0 0x6 0x0
+#define IOMUXC_GPIO_LPSR_00_SAI4_MCLK				0x000 0x040 0x0C8 0x7 0x0
+#define IOMUXC_GPIO_LPSR_00_GPIO12_IO00				0x000 0x040 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_LPSR_01_FLEXCAN3_RX				0x004 0x044 0x080 0x0 0x0
+#define IOMUXC_GPIO_LPSR_01_MIC_BITSTREAM0			0x004 0x044 0x0B4 0x1 0x0
+#define IOMUXC_GPIO_LPSR_01_MQS_LEFT				0x004 0x044 0x0 0x2 0x0
+#define IOMUXC_GPIO_LPSR_01_ARM_CM4_EVENTI			0x004 0x044 0x0 0x3 0x0
+#define IOMUXC_GPIO_LPSR_01_GPIO_MUX6_IO01			0x004 0x044 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_01_LPUART12_RXD			0x004 0x044 0x0AC 0x6 0x0
+#define IOMUXC_GPIO_LPSR_01_GPIO12_IO01				0x004 0x044 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_LPSR_02_GPIO12_IO02				0x008 0x048 0x0 0xA 0x0
+#define IOMUXC_GPIO_LPSR_02_SRC_BOOT_MODE00			0x008 0x048 0x0 0x0 0x0
+#define IOMUXC_GPIO_LPSR_02_LPSPI5_SCK				0x008 0x048 0x098 0x1 0x0
+#define IOMUXC_GPIO_LPSR_02_SAI4_TX_DATA			0x008 0x048 0x0 0x2 0x0
+#define IOMUXC_GPIO_LPSR_02_MQS_RIGHT				0x008 0x048 0x0 0x3 0x0
+#define IOMUXC_GPIO_LPSR_02_GPIO_MUX6_IO02			0x008 0x048 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_LPSR_03_SRC_BOOT_MODE01			0x00C 0x04C 0x0 0x0 0x0
+#define IOMUXC_GPIO_LPSR_03_LPSPI5_PCS0				0x00C 0x04C 0x094 0x1 0x0
+#define IOMUXC_GPIO_LPSR_03_SAI4_TX_SYNC			0x00C 0x04C 0x0DC 0x2 0x0
+#define IOMUXC_GPIO_LPSR_03_MQS_LEFT				0x00C 0x04C 0x0 0x3 0x0
+#define IOMUXC_GPIO_LPSR_03_GPIO_MUX6_IO03			0x00C 0x04C 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_03_GPIO12_IO03				0x00C 0x04C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_LPSR_04_LPI2C5_SDA				0x010 0x050 0x088 0x0 0x0
+#define IOMUXC_GPIO_LPSR_04_LPSPI5_SOUT				0x010 0x050 0x0A0 0x1 0x0
+#define IOMUXC_GPIO_LPSR_04_SAI4_TX_BCLK			0x010 0x050 0x0D8 0x2 0x0
+#define IOMUXC_GPIO_LPSR_04_LPUART12_RTS_B			0x010 0x050 0x0 0x3 0x0
+#define IOMUXC_GPIO_LPSR_04_GPIO_MUX6_IO04			0x010 0x050 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_04_LPUART11_TXD			0x010 0x050 0x0A8 0x6 0x0
+#define IOMUXC_GPIO_LPSR_04_GPIO12_IO04				0x010 0x050 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_LPSR_05_GPIO12_IO05				0x014 0x054 0x0 0xA 0x0
+#define IOMUXC_GPIO_LPSR_05_LPI2C5_SCL				0x014 0x054 0x084 0x0 0x0
+#define IOMUXC_GPIO_LPSR_05_LPSPI5_SIN				0x014 0x054 0x09C 0x1 0x0
+#define IOMUXC_GPIO_LPSR_05_SAI4_MCLK				0x014 0x054 0x0C8 0x2 0x1
+#define IOMUXC_GPIO_LPSR_05_LPUART12_CTS_B			0x014 0x054 0x0 0x3 0x0
+#define IOMUXC_GPIO_LPSR_05_GPIO_MUX6_IO05			0x014 0x054 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_05_LPUART11_RXD			0x014 0x054 0x0A4 0x6 0x0
+#define IOMUXC_GPIO_LPSR_05_NMI_GLUE_NMI			0x014 0x054 0x0C4 0x7 0x0
+
+#define IOMUXC_GPIO_LPSR_06_LPI2C6_SDA				0x018 0x058 0x090 0x0 0x0
+#define IOMUXC_GPIO_LPSR_06_SAI4_RX_DATA			0x018 0x058 0x0D0 0x2 0x0
+#define IOMUXC_GPIO_LPSR_06_LPUART12_TXD			0x018 0x058 0x0B0 0x3 0x1
+#define IOMUXC_GPIO_LPSR_06_LPSPI6_PCS3				0x018 0x058 0x0 0x4 0x0
+#define IOMUXC_GPIO_LPSR_06_GPIO_MUX6_IO06			0x018 0x058 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_06_FLEXCAN3_TX				0x018 0x058 0x0 0x6 0x0
+#define IOMUXC_GPIO_LPSR_06_PIT2_TRIGGER3			0x018 0x058 0x0 0x7 0x0
+#define IOMUXC_GPIO_LPSR_06_LPSPI5_PCS1				0x018 0x058 0x0 0x8 0x0
+#define IOMUXC_GPIO_LPSR_06_GPIO12_IO06				0x018 0x058 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_LPSR_07_LPI2C6_SCL				0x01C 0x05C 0x08C 0x0 0x0
+#define IOMUXC_GPIO_LPSR_07_SAI4_RX_BCLK			0x01C 0x05C 0x0CC 0x2 0x0
+#define IOMUXC_GPIO_LPSR_07_LPUART12_RXD			0x01C 0x05C 0x0AC 0x3 0x1
+#define IOMUXC_GPIO_LPSR_07_LPSPI6_PCS2				0x01C 0x05C 0x0 0x4 0x0
+#define IOMUXC_GPIO_LPSR_07_GPIO_MUX6_IO07			0x01C 0x05C 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_07_FLEXCAN3_RX				0x01C 0x05C 0x080 0x6 0x1
+#define IOMUXC_GPIO_LPSR_07_PIT2_TRIGGER2			0x01C 0x05C 0x0 0x7 0x0
+#define IOMUXC_GPIO_LPSR_07_LPSPI5_PCS2				0x01C 0x05C 0x0 0x8 0x0
+#define IOMUXC_GPIO_LPSR_07_GPIO12_IO07				0x01C 0x05C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_LPSR_08_GPIO12_IO08				0x020 0x060 0x0 0xA 0x0
+#define IOMUXC_GPIO_LPSR_08_LPUART11_TXD			0x020 0x060 0x0A8 0x0 0x1
+#define IOMUXC_GPIO_LPSR_08_FLEXCAN3_TX				0x020 0x060 0x0 0x1 0x0
+#define IOMUXC_GPIO_LPSR_08_SAI4_RX_SYNC			0x020 0x060 0x0D4 0x2 0x0
+#define IOMUXC_GPIO_LPSR_08_MIC_CLK				0x020 0x060 0x0 0x3 0x0
+#define IOMUXC_GPIO_LPSR_08_LPSPI6_PCS1				0x020 0x060 0x0 0x4 0x0
+#define IOMUXC_GPIO_LPSR_08_GPIO_MUX6_IO08			0x020 0x060 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_08_LPI2C5_SDA				0x020 0x060 0x088 0x6 0x1
+#define IOMUXC_GPIO_LPSR_08_PIT2_TRIGGER1			0x020 0x060 0x0 0x7 0x0
+#define IOMUXC_GPIO_LPSR_08_LPSPI5_PCS3				0x020 0x060 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_LPSR_09_GPIO12_IO09				0x024 0x064 0x0 0xA 0x0
+#define IOMUXC_GPIO_LPSR_09_LPUART11_RXD			0x024 0x064 0x0A4 0x0 0x1
+#define IOMUXC_GPIO_LPSR_09_FLEXCAN3_RX				0x024 0x064 0x080 0x1 0x2
+#define IOMUXC_GPIO_LPSR_09_PIT2_TRIGGER0			0x024 0x064 0x0 0x2 0x0
+#define IOMUXC_GPIO_LPSR_09_MIC_BITSTREAM0			0x024 0x064 0x0B4 0x3 0x1
+#define IOMUXC_GPIO_LPSR_09_LPSPI6_PCS0				0x024 0x064 0x0 0x4 0x0
+#define IOMUXC_GPIO_LPSR_09_GPIO_MUX6_IO09			0x024 0x064 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_09_LPI2C5_SCL				0x024 0x064 0x084 0x6 0x1
+#define IOMUXC_GPIO_LPSR_09_SAI4_TX_DATA			0x024 0x064 0x0 0x7 0x0
+
+#define IOMUXC_GPIO_LPSR_10_GPIO12_IO10				0x028 0x068 0x0 0xA 0x0
+#define IOMUXC_GPIO_LPSR_10_JTAG_MUX_TRSTB			0x028 0x068 0x0 0x0 0x0
+#define IOMUXC_GPIO_LPSR_10_LPUART11_CTS_B			0x028 0x068 0x0 0x1 0x0
+#define IOMUXC_GPIO_LPSR_10_LPI2C6_SDA				0x028 0x068 0x090 0x2 0x1
+#define IOMUXC_GPIO_LPSR_10_MIC_BITSTREAM1			0x028 0x068 0x0B8 0x3 0x0
+#define IOMUXC_GPIO_LPSR_10_LPSPI6_SCK				0x028 0x068 0x0 0x4 0x0
+#define IOMUXC_GPIO_LPSR_10_GPIO_MUX6_IO10			0x028 0x068 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_10_LPI2C5_SCLS				0x028 0x068 0x0 0x6 0x0
+#define IOMUXC_GPIO_LPSR_10_SAI4_TX_SYNC			0x028 0x068 0x0DC 0x7 0x1
+#define IOMUXC_GPIO_LPSR_10_LPUART12_TXD			0x028 0x068 0x0B0 0x8 0x2
+
+#define IOMUXC_GPIO_LPSR_11_JTAG_MUX_TDO			0x02C 0x06C 0x0 0x0 0x0
+#define IOMUXC_GPIO_LPSR_11_LPUART11_RTS_B			0x02C 0x06C 0x0 0x1 0x0
+#define IOMUXC_GPIO_LPSR_11_LPI2C6_SCL				0x02C 0x06C 0x08C 0x2 0x1
+#define IOMUXC_GPIO_LPSR_11_MIC_BITSTREAM2			0x02C 0x06C 0x0BC 0x3 0x0
+#define IOMUXC_GPIO_LPSR_11_LPSPI6_SOUT				0x02C 0x06C 0x0 0x4 0x0
+#define IOMUXC_GPIO_LPSR_11_GPIO_MUX6_IO11			0x02C 0x06C 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_11_LPI2C5_SDAS				0x02C 0x06C 0x0 0x6 0x0
+#define IOMUXC_GPIO_LPSR_11_ARM_TRACE_SWO			0x02C 0x06C 0x0 0x7 0x0
+#define IOMUXC_GPIO_LPSR_11_LPUART12_RXD			0x02C 0x06C 0x0AC 0x8 0x2
+#define IOMUXC_GPIO_LPSR_11_GPIO12_IO11				0x02C 0x06C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_LPSR_12_GPIO12_IO12				0x030 0x070 0x0 0xA 0x0
+#define IOMUXC_GPIO_LPSR_12_JTAG_MUX_TDI			0x030 0x070 0x0 0x0 0x0
+#define IOMUXC_GPIO_LPSR_12_PIT2_TRIGGER0			0x030 0x070 0x0 0x1 0x0
+#define IOMUXC_GPIO_LPSR_12_MIC_BITSTREAM3			0x030 0x070 0x0C0 0x3 0x0
+#define IOMUXC_GPIO_LPSR_12_LPSPI6_SIN				0x030 0x070 0x0 0x4 0x0
+#define IOMUXC_GPIO_LPSR_12_GPIO_MUX6_IO12			0x030 0x070 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_12_LPI2C5_HREQ				0x030 0x070 0x0 0x6 0x0
+#define IOMUXC_GPIO_LPSR_12_SAI4_TX_BCLK			0x030 0x070 0x0D8 0x7 0x1
+#define IOMUXC_GPIO_LPSR_12_LPSPI5_SCK				0x030 0x070 0x098 0x8 0x1
+
+#define IOMUXC_GPIO_LPSR_13_GPIO12_IO13				0x034 0x074 0x0 0xA 0x0
+#define IOMUXC_GPIO_LPSR_13_JTAG_MUX_MOD			0x034 0x074 0x0 0x0 0x0
+#define IOMUXC_GPIO_LPSR_13_MIC_BITSTREAM1			0x034 0x074 0x0B8 0x1 0x1
+#define IOMUXC_GPIO_LPSR_13_PIT2_TRIGGER1			0x034 0x074 0x0 0x2 0x0
+#define IOMUXC_GPIO_LPSR_13_GPIO_MUX6_IO13			0x034 0x074 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_13_SAI4_RX_DATA			0x034 0x074 0x0D0 0x7 0x1
+#define IOMUXC_GPIO_LPSR_13_LPSPI5_PCS0				0x034 0x074 0x094 0x8 0x1
+
+#define IOMUXC_GPIO_LPSR_14_JTAG_MUX_TCK			0x038 0x078 0x0 0x0 0x0
+#define IOMUXC_GPIO_LPSR_14_MIC_BITSTREAM2			0x038 0x078 0x0BC 0x1 0x1
+#define IOMUXC_GPIO_LPSR_14_PIT2_TRIGGER2			0x038 0x078 0x0 0x2 0x0
+#define IOMUXC_GPIO_LPSR_14_GPIO_MUX6_IO14			0x038 0x078 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_14_SAI4_RX_BCLK			0x038 0x078 0x0CC 0x7 0x1
+#define IOMUXC_GPIO_LPSR_14_LPSPI5_SOUT				0x038 0x078 0x0A0 0x8 0x1
+#define IOMUXC_GPIO_LPSR_14_GPIO12_IO14				0x038 0x078 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_LPSR_15_GPIO12_IO15				0x03C 0x07C 0x0 0xA 0x0
+#define IOMUXC_GPIO_LPSR_15_JTAG_MUX_TMS			0x03C 0x07C 0x0 0x0 0x0
+#define IOMUXC_GPIO_LPSR_15_MIC_BITSTREAM3			0x03C 0x07C 0x0C0 0x1 0x1
+#define IOMUXC_GPIO_LPSR_15_PIT2_TRIGGER3			0x03C 0x07C 0x0 0x2 0x0
+#define IOMUXC_GPIO_LPSR_15_GPIO_MUX6_IO15			0x03C 0x07C 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_15_SAI4_RX_SYNC			0x03C 0x07C 0x0D4 0x7 0x1
+#define IOMUXC_GPIO_LPSR_15_LPSPI5_SIN				0x03C 0x07C 0x09C 0x8 0x1
+
+#define IOMUXC_WAKEUP_DIG_GPIO13_IO00				0x40C94000 0x40C94040 0x0 0x5 0x0
+#define IOMUXC_WAKEUP_DIG_NMI_GLUE_NMI				0x40C94000 0x40C94040 0x0C4 0x7 0x1
+
+#define IOMUXC_PMIC_ON_REQ_DIG_SNVS_LP_PMIC_ON_REQ		0x40C94004 0x40C94044 0x0 0x0 0x0
+#define IOMUXC_PMIC_ON_REQ_DIG_GPIO13_IO01			0x40C94004 0x40C94044 0x0 0x5 0x0
+
+#define IOMUXC_PMIC_STBY_REQ_DIG_CCM_PMIC_VSTBY_REQ		0x40C94008 0x40C94048 0x0 0x0 0x0
+#define IOMUXC_PMIC_STBY_REQ_DIG_GPIO13_IO02			0x40C94008 0x40C94048 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SNVS_00_DIG_SNVS_TAMPER0			0x40C9400C 0x40C9404C 0x0 0x0 0x0
+#define IOMUXC_GPIO_SNVS_00_DIG_GPIO13_IO03			0x40C9400C 0x40C9404C 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SNVS_01_DIG_SNVS_TAMPER1			0x40C94010 0x40C94050 0x0 0x0 0x0
+#define IOMUXC_GPIO_SNVS_01_DIG_GPIO13_IO04			0x40C94010 0x40C94050 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SNVS_02_DIG_SNVS_TAMPER2			0x40C94014 0x40C94054 0x0 0x0 0x0
+#define IOMUXC_GPIO_SNVS_02_DIG_GPIO13_IO05			0x40C94014 0x40C94054 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SNVS_03_DIG_SNVS_TAMPER3			0x40C94018 0x40C94058 0x0 0x0 0x0
+#define IOMUXC_GPIO_SNVS_03_DIG_GPIO13_IO06			0x40C94018 0x40C94058 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SNVS_04_DIG_SNVS_TAMPER4			0x40C9401C 0x40C9405C 0x0 0x0 0x0
+#define IOMUXC_GPIO_SNVS_04_DIG_GPIO13_IO07			0x40C9401C 0x40C9405C 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SNVS_05_DIG_SNVS_TAMPER5			0x40C94020 0x40C94060 0x0 0x0 0x0
+#define IOMUXC_GPIO_SNVS_05_DIG_GPIO13_IO08			0x40C94020 0x40C94060 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SNVS_06_DIG_SNVS_TAMPER6			0x40C94024 0x40C94064 0x0 0x0 0x0
+#define IOMUXC_GPIO_SNVS_06_DIG_GPIO13_IO09			0x40C94024 0x40C94064 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SNVS_07_DIG_SNVS_TAMPER7			0x40C94028 0x40C94068 0x0 0x0 0x0
+#define IOMUXC_GPIO_SNVS_07_DIG_GPIO13_IO10			0x40C94028 0x40C94068 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SNVS_08_DIG_SNVS_TAMPER8			0x40C9402C 0x40C9406C 0x0 0x0 0x0
+#define IOMUXC_GPIO_SNVS_08_DIG_GPIO13_IO11			0x40C9402C 0x40C9406C 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SNVS_09_DIG_SNVS_TAMPER9			0x40C94030 0x40C94070 0x0 0x0 0x0
+#define IOMUXC_GPIO_SNVS_09_DIG_GPIO13_IO12			0x40C94030 0x40C94070 0x0 0x5 0x0
+
+#define IOMUXC_TEST_MODE_DIG					0x0 0x40C94034 0x0 0x0 0x0
+
+#define IOMUXC_POR_B_DIG					0x0 0x40C94038 0x0 0x0 0x0
+
+#define IOMUXC_ONOFF_DIG					0x0 0x40C9403C 0x0 0x0 0x0
+
+#define IOMUXC_GPIO_EMC_B1_00_SEMC_DATA00			0x010 0x254 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_00_FLEXPWM4_PWM0_A			0x010 0x254 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_00_GPIO_MUX1_IO00			0x010 0x254 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_00_FLEXIO1_D00			0x010 0x254 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_00_GPIO7_IO00			0x010 0x254 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_01_GPIO7_IO01			0x014 0x258 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_01_SEMC_DATA01			0x014 0x258 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_01_FLEXPWM4_PWM0_B			0x014 0x258 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_01_GPIO_MUX1_IO01			0x014 0x258 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_01_FLEXIO1_D01			0x014 0x258 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_02_SEMC_DATA02			0x018 0x25C 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_02_FLEXPWM4_PWM1_A			0x018 0x25C 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_02_GPIO_MUX1_IO02			0x018 0x25C 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_02_FLEXIO1_D02			0x018 0x25C 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_02_GPIO7_IO02			0x018 0x25C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_03_SEMC_DATA03			0x01C 0x260 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_03_FLEXPWM4_PWM1_B			0x01C 0x260 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_03_GPIO_MUX1_IO03			0x01C 0x260 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_03_FLEXIO1_D03			0x01C 0x260 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_03_GPIO7_IO03			0x01C 0x260 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_04_GPIO7_IO04			0x020 0x264 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_04_SEMC_DATA04			0x020 0x264 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_04_FLEXPWM4_PWM2_A			0x020 0x264 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_04_GPIO_MUX1_IO04			0x020 0x264 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_04_FLEXIO1_D04			0x020 0x264 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_05_SEMC_DATA05			0x024 0x268 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_05_FLEXPWM4_PWM2_B			0x024 0x268 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_05_GPIO_MUX1_IO05			0x024 0x268 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_05_FLEXIO1_D05			0x024 0x268 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_05_GPIO7_IO05			0x024 0x268 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_06_SEMC_DATA06			0x028 0x26C 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_06_FLEXPWM2_PWM0_A			0x028 0x26C 0x518 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_06_GPIO_MUX1_IO06			0x028 0x26C 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_06_FLEXIO1_D06			0x028 0x26C 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_06_GPIO7_IO06			0x028 0x26C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_07_GPIO7_IO07			0x02C 0x270 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_07_SEMC_DATA07			0x02C 0x270 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_07_FLEXPWM2_PWM0_B			0x02C 0x270 0x524 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_07_GPIO_MUX1_IO07			0x02C 0x270 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_07_FLEXIO1_D07			0x02C 0x270 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_08_SEMC_DM00				0x030 0x274 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_08_FLEXPWM2_PWM1_A			0x030 0x274 0x51C 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_08_GPIO_MUX1_IO08			0x030 0x274 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_08_FLEXIO1_D08			0x030 0x274 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_08_GPIO7_IO08			0x030 0x274 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_09_SEMC_ADDR00			0x034 0x278 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_09_FLEXPWM2_PWM1_B			0x034 0x278 0x528 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_09_GPT5_CAPTURE1			0x034 0x278 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_09_GPIO_MUX1_IO09			0x034 0x278 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_09_FLEXIO1_D09			0x034 0x278 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_09_GPIO7_IO09			0x034 0x278 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_10_SEMC_ADDR01			0x038 0x27C 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_10_FLEXPWM2_PWM2_A			0x038 0x27C 0x520 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_10_GPT5_CAPTURE2			0x038 0x27C 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_10_GPIO_MUX1_IO10			0x038 0x27C 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_10_FLEXIO1_D10			0x038 0x27C 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_10_GPIO7_IO10			0x038 0x27C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_11_GPIO7_IO11			0x03C 0x280 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_11_SEMC_ADDR02			0x03C 0x280 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_11_FLEXPWM2_PWM2_B			0x03C 0x280 0x52C 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_11_GPT5_COMPARE1			0x03C 0x280 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_11_GPIO_MUX1_IO11			0x03C 0x280 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_11_FLEXIO1_D11			0x03C 0x280 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_12_SEMC_ADDR03			0x040 0x284 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_12_XBAR1_INOUT04			0x040 0x284 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_12_GPT5_COMPARE2			0x040 0x284 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_12_GPIO_MUX1_IO12			0x040 0x284 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_12_FLEXIO1_D12			0x040 0x284 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_12_GPIO7_IO12			0x040 0x284 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_13_SEMC_ADDR04			0x044 0x288 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_13_XBAR1_INOUT05			0x044 0x288 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_13_GPT5_COMPARE3			0x044 0x288 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_13_GPIO_MUX1_IO13			0x044 0x288 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_13_FLEXIO1_D13			0x044 0x288 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_13_GPIO7_IO13			0x044 0x288 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_14_GPIO7_IO14			0x048 0x28C 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_14_SEMC_ADDR05			0x048 0x28C 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_14_XBAR1_INOUT06			0x048 0x28C 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_14_GPT5_CLK				0x048 0x28C 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_14_GPIO_MUX1_IO14			0x048 0x28C 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_14_FLEXIO1_D14			0x048 0x28C 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_15_SEMC_ADDR06			0x04C 0x290 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_15_XBAR1_INOUT07			0x04C 0x290 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_15_GPIO_MUX1_IO15			0x04C 0x290 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_15_FLEXIO1_D15			0x04C 0x290 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_15_GPIO7_IO15			0x04C 0x290 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_16_SEMC_ADDR07			0x050 0x294 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_16_XBAR1_INOUT08			0x050 0x294 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_16_GPIO_MUX1_IO16			0x050 0x294 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_16_FLEXIO1_D16			0x050 0x294 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_16_GPIO7_IO16			0x050 0x294 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_17_GPIO7_IO17			0x054 0x298 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_17_SEMC_ADDR08			0x054 0x298 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_17_FLEXPWM4_PWM3_A			0x054 0x298 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_17_TMR1_TIMER0			0x054 0x298 0x63C 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_17_GPIO_MUX1_IO17			0x054 0x298 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_17_FLEXIO1_D17			0x054 0x298 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_18_SEMC_ADDR09			0x058 0x29C 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_18_FLEXPWM4_PWM3_B			0x058 0x29C 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_18_TMR2_TIMER0			0x058 0x29C 0x648 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_18_GPIO_MUX1_IO18			0x058 0x29C 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_18_FLEXIO1_D18			0x058 0x29C 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_18_GPIO7_IO18			0x058 0x29C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_19_SEMC_ADDR11			0x05C 0x2A0 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_19_FLEXPWM2_PWM3_A			0x05C 0x2A0 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_19_TMR3_TIMER0			0x05C 0x2A0 0x654 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_19_GPIO_MUX1_IO19			0x05C 0x2A0 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_19_FLEXIO1_D19			0x05C 0x2A0 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_19_GPIO7_IO19			0x05C 0x2A0 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_20_SEMC_ADDR12			0x060 0x2A4 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_20_FLEXPWM2_PWM3_B			0x060 0x2A4 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_20_TMR4_TIMER0			0x060 0x2A4 0x660 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_20_GPIO_MUX1_IO20			0x060 0x2A4 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_20_FLEXIO1_D20			0x060 0x2A4 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_20_GPIO7_IO20			0x060 0x2A4 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_21_GPIO7_IO21			0x064 0x2A8 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_21_SEMC_BA0				0x064 0x2A8 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_21_FLEXPWM3_PWM3_A			0x064 0x2A8 0x53C 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_21_GPIO_MUX1_IO21			0x064 0x2A8 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_21_FLEXIO1_D21			0x064 0x2A8 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_22_GPIO7_IO22			0x068 0x2AC 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_22_SEMC_BA1				0x068 0x2AC 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_22_FLEXPWM3_PWM3_B			0x068 0x2AC 0x54C 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_22_GPIO_MUX1_IO22			0x068 0x2AC 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_22_FLEXIO1_D22			0x068 0x2AC 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_23_SEMC_ADDR10			0x06C 0x2B0 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_23_FLEXPWM1_PWM0_A			0x06C 0x2B0 0x500 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_23_GPIO_MUX1_IO23			0x06C 0x2B0 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_23_FLEXIO1_D23			0x06C 0x2B0 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_23_GPIO7_IO23			0x06C 0x2B0 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_24_GPIO7_IO24			0x070 0x2B4 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_24_SEMC_CAS				0x070 0x2B4 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_24_FLEXPWM1_PWM0_B			0x070 0x2B4 0x50C 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_24_GPIO_MUX1_IO24			0x070 0x2B4 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_24_FLEXIO1_D24			0x070 0x2B4 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_25_GPIO7_IO25			0x074 0x2B8 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_25_SEMC_RAS				0x074 0x2B8 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_25_FLEXPWM1_PWM1_A			0x074 0x2B8 0x504 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_25_GPIO_MUX1_IO25			0x074 0x2B8 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_25_FLEXIO1_D25			0x074 0x2B8 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_26_SEMC_CLK				0x078 0x2BC 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_26_FLEXPWM1_PWM1_B			0x078 0x2BC 0x510 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_26_GPIO_MUX1_IO26			0x078 0x2BC 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_26_FLEXIO1_D26			0x078 0x2BC 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_26_GPIO7_IO26			0x078 0x2BC 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_27_GPIO7_IO27			0x07C 0x2C0 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_27_SEMC_CKE				0x07C 0x2C0 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_27_FLEXPWM1_PWM2_A			0x07C 0x2C0 0x508 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_27_GPIO_MUX1_IO27			0x07C 0x2C0 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_27_FLEXIO1_D27			0x07C 0x2C0 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_28_GPIO7_IO28			0x080 0x2C4 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_28_SEMC_WE				0x080 0x2C4 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_28_FLEXPWM1_PWM2_B			0x080 0x2C4 0x514 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_28_GPIO_MUX1_IO28			0x080 0x2C4 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_28_FLEXIO1_D28			0x080 0x2C4 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_29_SEMC_CS0				0x084 0x2C8 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_29_FLEXPWM3_PWM0_A			0x084 0x2C8 0x530 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_29_GPIO_MUX1_IO29			0x084 0x2C8 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_29_FLEXIO1_D29			0x084 0x2C8 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_29_GPIO7_IO29			0x084 0x2C8 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_30_SEMC_DATA08			0x088 0x2CC 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_30_FLEXPWM3_PWM0_B			0x088 0x2CC 0x540 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_30_GPIO_MUX1_IO30			0x088 0x2CC 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_30_FLEXIO1_D30			0x088 0x2CC 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_30_GPIO7_IO30			0x088 0x2CC 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_31_GPIO7_IO31			0x08C 0x2D0 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_31_SEMC_DATA09			0x08C 0x2D0 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_31_FLEXPWM3_PWM1_A			0x08C 0x2D0 0x534 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_31_GPIO_MUX1_IO31			0x08C 0x2D0 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_31_FLEXIO1_D31			0x08C 0x2D0 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_32_GPIO8_IO00			0x090 0x2D4 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_32_SEMC_DATA10			0x090 0x2D4 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_32_FLEXPWM3_PWM1_B			0x090 0x2D4 0x544 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_32_GPIO_MUX2_IO00			0x090 0x2D4 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_EMC_B1_33_SEMC_DATA11			0x094 0x2D8 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_33_FLEXPWM3_PWM2_A			0x094 0x2D8 0x538 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_33_GPIO_MUX2_IO01			0x094 0x2D8 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_33_GPIO8_IO01			0x094 0x2D8 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_34_GPIO8_IO02			0x098 0x2DC 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_34_SEMC_DATA12			0x098 0x2DC 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_34_FLEXPWM3_PWM2_B			0x098 0x2DC 0x548 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_34_GPIO_MUX2_IO02			0x098 0x2DC 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_EMC_B1_35_GPIO8_IO03			0x09C 0x2E0 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_35_SEMC_DATA13			0x09C 0x2E0 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_35_XBAR1_INOUT09			0x09C 0x2E0 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_35_GPIO_MUX2_IO03			0x09C 0x2E0 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_EMC_B1_36_SEMC_DATA14			0x0A0 0x2E4 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_36_XBAR1_INOUT10			0x0A0 0x2E4 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_36_GPIO_MUX2_IO04			0x0A0 0x2E4 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_36_GPIO8_IO04			0x0A0 0x2E4 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_37_GPIO8_IO05			0x0A4 0x2E8 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_37_SEMC_DATA15			0x0A4 0x2E8 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_37_XBAR1_INOUT11			0x0A4 0x2E8 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_37_GPIO_MUX2_IO05			0x0A4 0x2E8 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_EMC_B1_38_GPIO8_IO06			0x0A8 0x2EC 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_38_SEMC_DM01				0x0A8 0x2EC 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_38_FLEXPWM1_PWM3_A			0x0A8 0x2EC 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_38_TMR1_TIMER1			0x0A8 0x2EC 0x640 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_38_GPIO_MUX2_IO06			0x0A8 0x2EC 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_EMC_B1_39_SEMC_DQS				0x0AC 0x2F0 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_39_FLEXPWM1_PWM3_B			0x0AC 0x2F0 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_39_TMR2_TIMER1			0x0AC 0x2F0 0x64C 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_39_GPIO_MUX2_IO07			0x0AC 0x2F0 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_39_GPIO8_IO07			0x0AC 0x2F0 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_40_SEMC_RDY				0x0B0 0x2F4 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_40_XBAR1_INOUT12			0x0B0 0x2F4 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_40_MQS_RIGHT				0x0B0 0x2F4 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_40_LPUART6_TXD			0x0B0 0x2F4 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B1_40_GPIO_MUX2_IO08			0x0B0 0x2F4 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_40_ENET_1G_MDC			0x0B0 0x2F4 0x0 0x7 0x0
+#define IOMUXC_GPIO_EMC_B1_40_CCM_CLKO1				0x0B0 0x2F4 0x0 0x9 0x0
+#define IOMUXC_GPIO_EMC_B1_40_GPIO8_IO08			0x0B0 0x2F4 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_41_GPIO8_IO09			0x0B4 0x2F8 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_41_SEMC_CSX00			0x0B4 0x2F8 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_41_XBAR1_INOUT13			0x0B4 0x2F8 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_41_MQS_LEFT				0x0B4 0x2F8 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_41_LPUART6_RXD			0x0B4 0x2F8 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B1_41_FLEXSPI2_B_DATA07			0x0B4 0x2F8 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B1_41_GPIO_MUX2_IO09			0x0B4 0x2F8 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_41_ENET_1G_MDIO			0x0B4 0x2F8 0x4C8 0x7 0x0
+#define IOMUXC_GPIO_EMC_B1_41_CCM_CLKO2				0x0B4 0x2F8 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_EMC_B2_00_SEMC_DATA16			0x0B8 0x2FC 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_00_CCM_ENET_REF_CLK_25M		0x0B8 0x2FC 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_00_TMR3_TIMER1			0x0B8 0x2FC 0x658 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_00_LPUART6_CTS_B			0x0B8 0x2FC 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_00_FLEXSPI2_B_DATA06			0x0B8 0x2FC 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_00_GPIO_MUX2_IO10			0x0B8 0x2FC 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_00_XBAR1_INOUT20			0x0B8 0x2FC 0x6D8 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_00_ENET_QOS_1588_EVENT1_OUT		0x0B8 0x2FC 0x0 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_00_LPSPI1_SCK			0x0B8 0x2FC 0x5D0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_00_LPI2C2_SCL			0x0B8 0x2FC 0x5B4 0x9 0x0
+#define IOMUXC_GPIO_EMC_B2_00_GPIO8_IO10			0x0B8 0x2FC 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_00_FLEXPWM3_PWM0_A			0x0B8 0x2FC 0x530 0xB 0x1
+
+#define IOMUXC_GPIO_EMC_B2_01_SEMC_DATA17			0x0BC 0x300 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_01_USDHC2_CD_B			0x0BC 0x300 0x6D0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_01_TMR4_TIMER1			0x0BC 0x300 0x664 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_01_LPUART6_RTS_B			0x0BC 0x300 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_01_FLEXSPI2_B_DATA05			0x0BC 0x300 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_01_GPIO_MUX2_IO11			0x0BC 0x300 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_01_XBAR1_INOUT21			0x0BC 0x300 0x6DC 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_01_ENET_QOS_1588_EVENT1_IN		0x0BC 0x300 0x0 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_01_LPSPI1_PCS0			0x0BC 0x300 0x5CC 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_01_LPI2C2_SDA			0x0BC 0x300 0x5B8 0x9 0x0
+#define IOMUXC_GPIO_EMC_B2_01_GPIO8_IO11			0x0BC 0x300 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_01_FLEXPWM3_PWM0_B			0x0BC 0x300 0x540 0xB 0x1
+
+#define IOMUXC_GPIO_EMC_B2_02_SEMC_DATA18			0x0C0 0x304 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_02_USDHC2_WP				0x0C0 0x304 0x6D4 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_02_VIDEO_MUX_CSI_DATA23		0x0C0 0x304 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_02_FLEXSPI2_B_DATA04			0x0C0 0x304 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_02_GPIO_MUX2_IO12			0x0C0 0x304 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_02_XBAR1_INOUT22			0x0C0 0x304 0x6E0 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_02_ENET_QOS_1588_EVENT1_AUX_IN	0x0C0 0x304 0x0 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_02_LPSPI1_SOUT			0x0C0 0x304 0x5D8 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_02_GPIO8_IO12			0x0C0 0x304 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_02_FLEXPWM3_PWM1_A			0x0C0 0x304 0x534 0xB 0x1
+
+#define IOMUXC_GPIO_EMC_B2_03_SEMC_DATA19			0x0C4 0x308 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_03_USDHC2_VSELECT			0x0C4 0x308 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_03_VIDEO_MUX_CSI_DATA22		0x0C4 0x308 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_03_FLEXSPI2_B_DATA03			0x0C4 0x308 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_03_GPIO_MUX2_IO13			0x0C4 0x308 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_03_XBAR1_INOUT23			0x0C4 0x308 0x6E4 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_03_ENET_1G_TX_DATA03			0x0C4 0x308 0x0 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_03_LPSPI1_SIN			0x0C4 0x308 0x5D4 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_03_GPIO8_IO13			0x0C4 0x308 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_03_FLEXPWM3_PWM1_B			0x0C4 0x308 0x544 0xB 0x1
+
+#define IOMUXC_GPIO_EMC_B2_04_SEMC_DATA20			0x0C8 0x30C 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_04_USDHC2_RESET_B			0x0C8 0x30C 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_04_SAI2_MCLK				0x0C8 0x30C 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_04_VIDEO_MUX_CSI_DATA21		0x0C8 0x30C 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_04_FLEXSPI2_B_DATA02			0x0C8 0x30C 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_04_GPIO_MUX2_IO14			0x0C8 0x30C 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_04_XBAR1_INOUT24			0x0C8 0x30C 0x6E8 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_04_ENET_1G_TX_DATA02			0x0C8 0x30C 0x0 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_04_LPSPI3_SCK			0x0C8 0x30C 0x600 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_04_GPIO8_IO14			0x0C8 0x30C 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_04_FLEXPWM3_PWM2_A			0x0C8 0x30C 0x538 0xB 0x1
+
+#define IOMUXC_GPIO_EMC_B2_05_SEMC_DATA21			0x0CC 0x310 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_05_GPT3_CLK				0x0CC 0x310 0x598 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_05_SAI2_RX_SYNC			0x0CC 0x310 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_05_VIDEO_MUX_CSI_DATA20		0x0CC 0x310 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_05_FLEXSPI2_B_DATA01			0x0CC 0x310 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_05_GPIO_MUX2_IO15			0x0CC 0x310 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_05_XBAR1_INOUT25			0x0CC 0x310 0x6EC 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_05_ENET_1G_RX_CLK			0x0CC 0x310 0x4CC 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_05_LPSPI3_PCS0			0x0CC 0x310 0x5F0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_05_PIT1_TRIGGER0			0x0CC 0x310 0x0 0x9 0x0
+#define IOMUXC_GPIO_EMC_B2_05_GPIO8_IO15			0x0CC 0x310 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_05_FLEXPWM3_PWM2_B			0x0CC 0x310 0x548 0xB 0x1
+
+#define IOMUXC_GPIO_EMC_B2_06_SEMC_DATA22			0x0D0 0x314 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_06_GPT3_CAPTURE1			0x0D0 0x314 0x590 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_06_GPIO8_IO16			0x0D0 0x314 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_06_SAI2_RX_BCLK			0x0D0 0x314 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_06_FLEXPWM3_PWM3_A			0x0D0 0x314 0x53C 0xB 0x1
+#define IOMUXC_GPIO_EMC_B2_06_VIDEO_MUX_CSI_DATA19		0x0D0 0x314 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_06_FLEXSPI2_B_DATA00			0x0D0 0x314 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_06_GPIO_MUX2_IO16			0x0D0 0x314 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_06_XBAR1_INOUT26			0x0D0 0x314 0x6F0 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_06_ENET_1G_TX_ER			0x0D0 0x314 0x0 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_06_LPSPI3_SOUT			0x0D0 0x314 0x608 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_06_PIT1_TRIGGER1			0x0D0 0x314 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_EMC_B2_07_SEMC_DATA23			0x0D4 0x318 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_07_GPT3_CAPTURE2			0x0D4 0x318 0x594 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_07_SAI2_RX_DATA			0x0D4 0x318 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_07_VIDEO_MUX_CSI_DATA18		0x0D4 0x318 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_07_FLEXSPI2_B_DQS			0x0D4 0x318 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_07_GPIO_MUX2_IO17			0x0D4 0x318 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_07_XBAR1_INOUT27			0x0D4 0x318 0x6F4 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_07_ENET_1G_RX_DATA03			0x0D4 0x318 0x4DC 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_07_LPSPI3_SIN			0x0D4 0x318 0x604 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_07_PIT1_TRIGGER2			0x0D4 0x318 0x0 0x9 0x0
+#define IOMUXC_GPIO_EMC_B2_07_GPIO8_IO17			0x0D4 0x318 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_07_FLEXPWM3_PWM3_B			0x0D4 0x318 0x54C 0xB 0x1
+
+#define IOMUXC_GPIO_EMC_B2_08_SEMC_DM02				0x0D8 0x31C 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_08_GPT3_COMPARE1			0x0D8 0x31C 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_08_SAI2_TX_DATA			0x0D8 0x31C 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_08_VIDEO_MUX_CSI_DATA17		0x0D8 0x31C 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_08_FLEXSPI2_B_SS0_B			0x0D8 0x31C 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_08_GPIO_MUX2_IO18			0x0D8 0x31C 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_08_XBAR1_INOUT28			0x0D8 0x31C 0x6F8 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_08_ENET_1G_RX_DATA02			0x0D8 0x31C 0x4D8 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_08_LPSPI3_PCS1			0x0D8 0x31C 0x5F4 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_08_PIT1_TRIGGER3			0x0D8 0x31C 0x0 0x9 0x0
+#define IOMUXC_GPIO_EMC_B2_08_GPIO8_IO18			0x0D8 0x31C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B2_09_GPIO8_IO19			0x0DC 0x320 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_09_SEMC_DATA24			0x0DC 0x320 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_09_GPT3_COMPARE2			0x0DC 0x320 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_09_SAI2_TX_BCLK			0x0DC 0x320 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_09_VIDEO_MUX_CSI_DATA16		0x0DC 0x320 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_09_FLEXSPI2_B_SCLK			0x0DC 0x320 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_09_GPIO_MUX2_IO19			0x0DC 0x320 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_09_XBAR1_INOUT29			0x0DC 0x320 0x6FC 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_09_ENET_1G_CRS			0x0DC 0x320 0x0 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_09_LPSPI3_PCS2			0x0DC 0x320 0x5F8 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_09_TMR1_TIMER0			0x0DC 0x320 0x63C 0x9 0x1
+
+#define IOMUXC_GPIO_EMC_B2_10_GPIO8_IO20			0x0E0 0x324 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_10_SEMC_DATA25			0x0E0 0x324 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_10_GPT3_COMPARE3			0x0E0 0x324 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_10_SAI2_TX_SYNC			0x0E0 0x324 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_10_VIDEO_MUX_CSI_FIELD		0x0E0 0x324 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_10_FLEXSPI2_A_SCLK			0x0E0 0x324 0x58C 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_10_GPIO_MUX2_IO20			0x0E0 0x324 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_10_XBAR1_INOUT30			0x0E0 0x324 0x700 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_10_ENET_1G_COL			0x0E0 0x324 0x0 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_10_LPSPI3_PCS3			0x0E0 0x324 0x5FC 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_10_TMR1_TIMER1			0x0E0 0x324 0x640 0x9 0x1
+
+#define IOMUXC_GPIO_EMC_B2_11_SEMC_DATA26			0x0E4 0x328 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_11_SPDIF_IN				0x0E4 0x328 0x6B4 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_11_ENET_1G_TX_DATA00			0x0E4 0x328 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_11_SAI3_RX_SYNC			0x0E4 0x328 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_11_FLEXSPI2_A_SS0_B			0x0E4 0x328 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_11_GPIO_MUX2_IO21			0x0E4 0x328 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_11_XBAR1_INOUT31			0x0E4 0x328 0x704 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_11_EMVSIM1_IO			0x0E4 0x328 0x69C 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_11_TMR1_TIMER2			0x0E4 0x328 0x644 0x9 0x0
+#define IOMUXC_GPIO_EMC_B2_11_GPIO8_IO21			0x0E4 0x328 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B2_12_SEMC_DATA27			0x0E8 0x32C 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_12_SPDIF_OUT				0x0E8 0x32C 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_12_ENET_1G_TX_DATA01			0x0E8 0x32C 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_12_SAI3_RX_BCLK			0x0E8 0x32C 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_12_FLEXSPI2_A_DQS			0x0E8 0x32C 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_12_GPIO_MUX2_IO22			0x0E8 0x32C 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_12_XBAR1_INOUT32			0x0E8 0x32C 0x708 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_12_EMVSIM1_CLK			0x0E8 0x32C 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_12_TMR1_TIMER3			0x0E8 0x32C 0x0 0x9 0x0
+#define IOMUXC_GPIO_EMC_B2_12_GPIO8_IO22			0x0E8 0x32C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B2_13_GPIO8_IO23			0x0EC 0x330 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_13_SEMC_DATA28			0x0EC 0x330 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_13_ENET_1G_TX_EN			0x0EC 0x330 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_13_SAI3_RX_DATA			0x0EC 0x330 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_13_FLEXSPI2_A_DATA00			0x0EC 0x330 0x57C 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_13_GPIO_MUX2_IO23			0x0EC 0x330 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_13_XBAR1_INOUT33			0x0EC 0x330 0x70C 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_13_EMVSIM1_RST			0x0EC 0x330 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_13_TMR2_TIMER0			0x0EC 0x330 0x648 0x9 0x1
+
+#define IOMUXC_GPIO_EMC_B2_14_SEMC_DATA29			0x0F0 0x334 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_14_ENET_1G_TX_CLK_IO			0x0F0 0x334 0x4E8 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_14_SAI3_TX_DATA			0x0F0 0x334 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_14_FLEXSPI2_A_DATA01			0x0F0 0x334 0x580 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_14_GPIO_MUX2_IO24			0x0F0 0x334 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_14_XBAR1_INOUT34			0x0F0 0x334 0x710 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_14_SFA_ipp_do_atx_clk_under_test	0x0F0 0x334 0x0 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_14_EMVSIM1_SVEN			0x0F0 0x334 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_14_TMR2_TIMER1			0x0F0 0x334 0x64C 0x9 0x1
+#define IOMUXC_GPIO_EMC_B2_14_GPIO8_IO24			0x0F0 0x334 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B2_15_SEMC_DATA30			0x0F4 0x338 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_15_ENET_1G_RX_DATA00			0x0F4 0x338 0x4D0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_15_SAI3_TX_BCLK			0x0F4 0x338 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_15_FLEXSPI2_A_DATA02			0x0F4 0x338 0x584 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_15_GPIO_MUX2_IO25			0x0F4 0x338 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_15_XBAR1_INOUT35			0x0F4 0x338 0x714 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_15_EMVSIM1_PD			0x0F4 0x338 0x6A0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_15_TMR2_TIMER2			0x0F4 0x338 0x650 0x9 0x0
+#define IOMUXC_GPIO_EMC_B2_15_GPIO8_IO25			0x0F4 0x338 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B2_16_GPIO8_IO26			0x0F8 0x33C 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_16_SEMC_DATA31			0x0F8 0x33C 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_16_XBAR1_INOUT14			0x0F8 0x33C 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_16_ENET_1G_RX_DATA01			0x0F8 0x33C 0x4D4 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_16_SAI3_TX_SYNC			0x0F8 0x33C 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_16_FLEXSPI2_A_DATA03			0x0F8 0x33C 0x588 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_16_GPIO_MUX2_IO26			0x0F8 0x33C 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_16_EMVSIM1_POWER_FAIL		0x0F8 0x33C 0x6A4 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_16_TMR2_TIMER3			0x0F8 0x33C 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_EMC_B2_17_SEMC_DM03				0x0FC 0x340 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_17_XBAR1_INOUT15			0x0FC 0x340 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_17_ENET_1G_RX_EN			0x0FC 0x340 0x4E0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_17_SAI3_MCLK				0x0FC 0x340 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_17_FLEXSPI2_A_DATA04			0x0FC 0x340 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_17_GPIO_MUX2_IO27			0x0FC 0x340 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_17_WDOG1_ANY				0x0FC 0x340 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_17_TMR3_TIMER0			0x0FC 0x340 0x654 0x9 0x1
+#define IOMUXC_GPIO_EMC_B2_17_GPIO8_IO27			0x0FC 0x340 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B2_18_SEMC_DQS4				0x100 0x344 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_18_XBAR1_INOUT16			0x100 0x344 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_18_ENET_1G_RX_ER			0x100 0x344 0x4E4 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_18_EWM_OUT_B				0x100 0x344 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_18_FLEXSPI2_A_DATA05			0x100 0x344 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_18_GPIO_MUX2_IO28			0x100 0x344 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_18_FLEXSPI1_A_DQS			0x100 0x344 0x550 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_18_WDOG1_B				0x100 0x344 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_18_TMR3_TIMER1			0x100 0x344 0x658 0x9 0x1
+#define IOMUXC_GPIO_EMC_B2_18_GPIO8_IO28			0x100 0x344 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B2_19_GPIO8_IO29			0x104 0x348 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_19_SEMC_CLKX00			0x104 0x348 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_19_ENET_MDC				0x104 0x348 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_19_ENET_1G_MDC			0x104 0x348 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_19_ENET_1G_REF_CLK			0x104 0x348 0x4C4 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_19_FLEXSPI2_A_DATA06			0x104 0x348 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_19_GPIO_MUX2_IO29			0x104 0x348 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_19_ENET_QOS_MDC			0x104 0x348 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_19_TMR3_TIMER2			0x104 0x348 0x65C 0x9 0x0
+
+#define IOMUXC_GPIO_EMC_B2_20_GPIO8_IO30			0x108 0x34C 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_20_SEMC_CLKX01			0x108 0x34C 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_20_ENET_MDIO				0x108 0x34C 0x4AC 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_20_ENET_1G_MDIO			0x108 0x34C 0x4C8 0x2 0x1
+#define IOMUXC_GPIO_EMC_B2_20_ENET_QOS_REF_CLK			0x108 0x34C 0x4A0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_20_FLEXSPI2_A_DATA07			0x108 0x34C 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_20_GPIO_MUX2_IO30			0x108 0x34C 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_20_ENET_QOS_MDIO			0x108 0x34C 0x4EC 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_20_TMR3_TIMER3			0x108 0x34C 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_AD_00_GPIO8_IO31				0x10C 0x350 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_00_EMVSIM1_IO				0x10C 0x350 0x69C 0x0 0x1
+#define IOMUXC_GPIO_AD_00_FLEXCAN2_TX				0x10C 0x350 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_00_ENET_1G_1588_EVENT1_IN		0x10C 0x350 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_00_GPT2_CAPTURE1				0x10C 0x350 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_00_FLEXPWM1_PWM0_A			0x10C 0x350 0x500 0x4 0x1
+#define IOMUXC_GPIO_AD_00_GPIO_MUX2_IO31			0x10C 0x350 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_00_LPUART7_TXD				0x10C 0x350 0x630 0x6 0x0
+#define IOMUXC_GPIO_AD_00_FLEXIO2_D00				0x10C 0x350 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_00_FLEXSPI2_B_SS1_B			0x10C 0x350 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_AD_01_GPIO9_IO00				0x110 0x354 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_01_EMVSIM1_CLK				0x110 0x354 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_01_FLEXCAN2_RX				0x110 0x354 0x49C 0x1 0x0
+#define IOMUXC_GPIO_AD_01_ENET_1G_1588_EVENT1_OUT		0x110 0x354 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_01_GPT2_CAPTURE2				0x110 0x354 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_01_FLEXPWM1_PWM0_B			0x110 0x354 0x50C 0x4 0x1
+#define IOMUXC_GPIO_AD_01_GPIO_MUX3_IO00			0x110 0x354 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_01_LPUART7_RXD				0x110 0x354 0x62C 0x6 0x0
+#define IOMUXC_GPIO_AD_01_FLEXIO2_D01				0x110 0x354 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_01_FLEXSPI2_A_SS1_B			0x110 0x354 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_AD_02_GPIO9_IO01				0x114 0x358 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_02_EMVSIM1_RST				0x114 0x358 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_02_LPUART7_CTS_B				0x114 0x358 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_02_ENET_1G_1588_EVENT2_IN		0x114 0x358 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_02_GPT2_COMPARE1				0x114 0x358 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_02_FLEXPWM1_PWM1_A			0x114 0x358 0x504 0x4 0x1
+#define IOMUXC_GPIO_AD_02_GPIO_MUX3_IO01			0x114 0x358 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_02_LPUART8_TXD				0x114 0x358 0x638 0x6 0x0
+#define IOMUXC_GPIO_AD_02_FLEXIO2_D02				0x114 0x358 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_02_VIDEO_MUX_EXT_DCIC1			0x114 0x358 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_AD_03_GPIO9_IO02				0x118 0x35C 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_03_EMVSIM1_SVEN				0x118 0x35C 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_03_LPUART7_RTS_B				0x118 0x35C 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_03_ENET_1G_1588_EVENT2_OUT		0x118 0x35C 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_03_GPT2_COMPARE2				0x118 0x35C 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_03_FLEXPWM1_PWM1_B			0x118 0x35C 0x510 0x4 0x1
+#define IOMUXC_GPIO_AD_03_GPIO_MUX3_IO02			0x118 0x35C 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_03_LPUART8_RXD				0x118 0x35C 0x634 0x6 0x0
+#define IOMUXC_GPIO_AD_03_FLEXIO2_D03				0x118 0x35C 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_03_VIDEO_MUX_EXT_DCIC2			0x118 0x35C 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_AD_04_EMVSIM1_PD				0x11C 0x360 0x6A0 0x0 0x1
+#define IOMUXC_GPIO_AD_04_LPUART8_CTS_B				0x11C 0x360 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_04_ENET_1G_1588_EVENT3_IN		0x11C 0x360 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_04_GPT2_COMPARE3				0x11C 0x360 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_04_FLEXPWM1_PWM2_A			0x11C 0x360 0x508 0x4 0x1
+#define IOMUXC_GPIO_AD_04_GPIO_MUX3_IO03			0x11C 0x360 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_04_WDOG1_B				0x11C 0x360 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_04_FLEXIO2_D04				0x11C 0x360 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_04_TMR4_TIMER0				0x11C 0x360 0x660 0x9 0x1
+#define IOMUXC_GPIO_AD_04_GPIO9_IO03				0x11C 0x360 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_AD_05_EMVSIM1_POWER_FAIL			0x120 0x364 0x6A4 0x0 0x1
+#define IOMUXC_GPIO_AD_05_LPUART8_RTS_B				0x120 0x364 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_05_ENET_1G_1588_EVENT3_OUT		0x120 0x364 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_05_GPT2_CLK				0x120 0x364 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_05_FLEXPWM1_PWM2_B			0x120 0x364 0x514 0x4 0x1
+#define IOMUXC_GPIO_AD_05_GPIO_MUX3_IO04			0x120 0x364 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_05_WDOG2_B				0x120 0x364 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_05_FLEXIO2_D05				0x120 0x364 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_05_TMR4_TIMER1				0x120 0x364 0x664 0x9 0x1
+#define IOMUXC_GPIO_AD_05_GPIO9_IO04				0x120 0x364 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_AD_06_USB_OTG2_OC				0x124 0x368 0x6B8 0x0 0x0
+#define IOMUXC_GPIO_AD_06_FLEXCAN1_TX				0x124 0x368 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_06_EMVSIM2_IO				0x124 0x368 0x6A8 0x2 0x0
+#define IOMUXC_GPIO_AD_06_GPT3_CAPTURE1				0x124 0x368 0x590 0x3 0x1
+#define IOMUXC_GPIO_AD_06_VIDEO_MUX_CSI_DATA15			0x124 0x368 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_06_GPIO_MUX3_IO05			0x124 0x368 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_06_ENET_1588_EVENT1_IN			0x124 0x368 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_06_FLEXIO2_D06				0x124 0x368 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_06_TMR4_TIMER2				0x124 0x368 0x668 0x9 0x0
+#define IOMUXC_GPIO_AD_06_GPIO9_IO05				0x124 0x368 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_06_FLEXPWM1_PWM0_X			0x124 0x368 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_07_USB_OTG2_PWR				0x128 0x36C 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_07_FLEXCAN1_RX				0x128 0x36C 0x498 0x1 0x0
+#define IOMUXC_GPIO_AD_07_EMVSIM2_CLK				0x128 0x36C 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_07_GPT3_CAPTURE2				0x128 0x36C 0x594 0x3 0x1
+#define IOMUXC_GPIO_AD_07_VIDEO_MUX_CSI_DATA14			0x128 0x36C 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_07_GPIO_MUX3_IO06			0x128 0x36C 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_07_ENET_1588_EVENT1_OUT			0x128 0x36C 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_07_FLEXIO2_D07				0x128 0x36C 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_07_TMR4_TIMER3				0x128 0x36C 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_07_GPIO9_IO06				0x128 0x36C 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_07_FLEXPWM1_PWM1_X			0x128 0x36C 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_08_USBPHY2_OTG_ID			0x12C 0x370 0x6C4 0x0 0x0
+#define IOMUXC_GPIO_AD_08_LPI2C1_SCL				0x12C 0x370 0x5AC 0x1 0x0
+#define IOMUXC_GPIO_AD_08_EMVSIM2_RST				0x12C 0x370 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_08_GPT3_COMPARE1				0x12C 0x370 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_08_VIDEO_MUX_CSI_DATA13			0x12C 0x370 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_08_GPIO_MUX3_IO07			0x12C 0x370 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_08_ENET_1588_EVENT2_IN			0x12C 0x370 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_08_FLEXIO2_D08				0x12C 0x370 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_08_GPIO9_IO07				0x12C 0x370 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_08_FLEXPWM1_PWM2_X			0x12C 0x370 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_09_USBPHY1_OTG_ID			0x130 0x374 0x6C0 0x0 0x0
+#define IOMUXC_GPIO_AD_09_LPI2C1_SDA				0x130 0x374 0x5B0 0x1 0x0
+#define IOMUXC_GPIO_AD_09_EMVSIM2_SVEN				0x130 0x374 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_09_GPT3_COMPARE2				0x130 0x374 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_09_VIDEO_MUX_CSI_DATA12			0x130 0x374 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_09_GPIO_MUX3_IO08			0x130 0x374 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_09_ENET_1588_EVENT2_OUT			0x130 0x374 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_09_FLEXIO2_D09				0x130 0x374 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_09_GPIO9_IO08				0x130 0x374 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_09_FLEXPWM1_PWM3_X			0x130 0x374 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_10_USB_OTG1_PWR				0x134 0x378 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_10_LPI2C1_SCLS				0x134 0x378 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_10_EMVSIM2_PD				0x134 0x378 0x6AC 0x2 0x0
+#define IOMUXC_GPIO_AD_10_GPT3_COMPARE3				0x134 0x378 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_10_VIDEO_MUX_CSI_DATA11			0x134 0x378 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_10_GPIO_MUX3_IO09			0x134 0x378 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_10_ENET_1588_EVENT3_IN			0x134 0x378 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_10_FLEXIO2_D10				0x134 0x378 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_10_GPIO9_IO09				0x134 0x378 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_10_FLEXPWM2_PWM0_X			0x134 0x378 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_11_USB_OTG1_OC				0x138 0x37C 0x6BC 0x0 0x0
+#define IOMUXC_GPIO_AD_11_LPI2C1_SDAS				0x138 0x37C 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_11_EMVSIM2_POWER_FAIL			0x138 0x37C 0x6B0 0x2 0x0
+#define IOMUXC_GPIO_AD_11_GPT3_CLK				0x138 0x37C 0x598 0x3 0x1
+#define IOMUXC_GPIO_AD_11_VIDEO_MUX_CSI_DATA10			0x138 0x37C 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_11_GPIO_MUX3_IO10			0x138 0x37C 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_11_ENET_1588_EVENT3_OUT			0x138 0x37C 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_11_FLEXIO2_D11				0x138 0x37C 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_11_GPIO9_IO10				0x138 0x37C 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_11_FLEXPWM2_PWM1_X			0x138 0x37C 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_12_SPDIF_LOCK				0x13C 0x380 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_12_LPI2C1_HREQ				0x13C 0x380 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_12_GPT1_CAPTURE1				0x13C 0x380 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_12_FLEXSPI1_B_DATA03			0x13C 0x380 0x570 0x3 0x0
+#define IOMUXC_GPIO_AD_12_VIDEO_MUX_CSI_PIXCLK			0x13C 0x380 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_12_GPIO_MUX3_IO11			0x13C 0x380 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_12_ENET_TX_DATA03			0x13C 0x380 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_12_FLEXIO2_D12				0x13C 0x380 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_12_EWM_OUT_B				0x13C 0x380 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_12_GPIO9_IO11				0x13C 0x380 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_12_FLEXPWM2_PWM2_X			0x13C 0x380 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_13_SPDIF_SR_CLK				0x140 0x384 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_13_PIT1_TRIGGER0				0x140 0x384 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_13_GPT1_CAPTURE2				0x140 0x384 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_13_FLEXSPI1_B_DATA02			0x140 0x384 0x56C 0x3 0x0
+#define IOMUXC_GPIO_AD_13_VIDEO_MUX_CSI_MCLK			0x140 0x384 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_13_GPIO_MUX3_IO12			0x140 0x384 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_13_ENET_TX_DATA02			0x140 0x384 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_13_FLEXIO2_D13				0x140 0x384 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_13_REF_CLK_32K				0x140 0x384 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_13_GPIO9_IO12				0x140 0x384 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_13_FLEXPWM2_PWM3_X			0x140 0x384 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_14_SPDIF_EXT_CLK				0x144 0x388 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_14_REF_CLK_24M				0x144 0x388 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_14_GPT1_COMPARE1				0x144 0x388 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_14_FLEXSPI1_B_DATA01			0x144 0x388 0x568 0x3 0x0
+#define IOMUXC_GPIO_AD_14_VIDEO_MUX_CSI_VSYNC			0x144 0x388 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_14_GPIO_MUX3_IO13			0x144 0x388 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_14_ENET_RX_CLK				0x144 0x388 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_14_FLEXIO2_D14				0x144 0x388 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_14_CCM_ENET_REF_CLK_25M			0x144 0x388 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_14_GPIO9_IO13				0x144 0x388 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_14_FLEXPWM3_PWM0_X			0x144 0x388 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_15_GPIO9_IO14				0x148 0x38C 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_15_FLEXPWM3_PWM1_X			0x148 0x38C 0x0 0xB 0x0
+#define IOMUXC_GPIO_AD_15_SPDIF_IN				0x148 0x38C 0x6B4 0x0 0x1
+#define IOMUXC_GPIO_AD_15_LPUART10_TXD				0x148 0x38C 0x628 0x1 0x0
+#define IOMUXC_GPIO_AD_15_GPT1_COMPARE2				0x148 0x38C 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_15_FLEXSPI1_B_DATA00			0x148 0x38C 0x564 0x3 0x0
+#define IOMUXC_GPIO_AD_15_VIDEO_MUX_CSI_HSYNC			0x148 0x38C 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_15_GPIO_MUX3_IO14			0x148 0x38C 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_15_ENET_TX_ER				0x148 0x38C 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_15_FLEXIO2_D15				0x148 0x38C 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_AD_16_SPDIF_OUT				0x14C 0x390 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_16_LPUART10_RXD				0x14C 0x390 0x624 0x1 0x0
+#define IOMUXC_GPIO_AD_16_GPT1_COMPARE3				0x14C 0x390 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_16_FLEXSPI1_B_SCLK			0x14C 0x390 0x578 0x3 0x0
+#define IOMUXC_GPIO_AD_16_VIDEO_MUX_CSI_DATA09			0x14C 0x390 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_16_GPIO_MUX3_IO15			0x14C 0x390 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_16_ENET_RX_DATA03			0x14C 0x390 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_16_FLEXIO2_D16				0x14C 0x390 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_16_ENET_1G_MDC				0x14C 0x390 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_16_GPIO9_IO15				0x14C 0x390 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_16_FLEXPWM3_PWM2_X			0x14C 0x390 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_17_SAI1_MCLK				0x150 0x394 0x66C 0x0 0x0
+#define IOMUXC_GPIO_AD_17_ACMP1_OUT				0x150 0x394 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_17_GPT1_CLK				0x150 0x394 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_17_FLEXSPI1_A_DQS			0x150 0x394 0x550 0x3 0x1
+#define IOMUXC_GPIO_AD_17_VIDEO_MUX_CSI_DATA08			0x150 0x394 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_17_GPIO_MUX3_IO16			0x150 0x394 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_17_ENET_RX_DATA02			0x150 0x394 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_17_FLEXIO2_D17				0x150 0x394 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_17_ENET_1G_MDIO				0x150 0x394 0x4C8 0x9 0x2
+#define IOMUXC_GPIO_AD_17_GPIO9_IO16				0x150 0x394 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_17_FLEXPWM3_PWM3_X			0x150 0x394 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_18_GPIO9_IO17				0x154 0x398 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_18_FLEXPWM4_PWM0_X			0x154 0x398 0x0 0xB 0x0
+#define IOMUXC_GPIO_AD_18_SAI1_RX_SYNC				0x154 0x398 0x678 0x0 0x0
+#define IOMUXC_GPIO_AD_18_ACMP2_OUT				0x154 0x398 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_18_LPSPI1_PCS1				0x154 0x398 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_18_FLEXSPI1_A_SS0_B			0x154 0x398 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_18_VIDEO_MUX_CSI_DATA07			0x154 0x398 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_18_GPIO_MUX3_IO17			0x154 0x398 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_18_ENET_CRS				0x154 0x398 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_18_FLEXIO2_D18				0x154 0x398 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_18_LPI2C2_SCL				0x154 0x398 0x5B4 0x9 0x1
+
+#define IOMUXC_GPIO_AD_19_SAI1_RX_BCLK				0x158 0x39C 0x670 0x0 0x0
+#define IOMUXC_GPIO_AD_19_ACMP3_OUT				0x158 0x39C 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_19_LPSPI1_PCS2				0x158 0x39C 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_19_FLEXSPI1_A_SCLK			0x158 0x39C 0x574 0x3 0x0
+#define IOMUXC_GPIO_AD_19_VIDEO_MUX_CSI_DATA06			0x158 0x39C 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_19_GPIO_MUX3_IO18			0x158 0x39C 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_19_ENET_COL				0x158 0x39C 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_19_FLEXIO2_D19				0x158 0x39C 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_19_LPI2C2_SDA				0x158 0x39C 0x5B8 0x9 0x1
+#define IOMUXC_GPIO_AD_19_GPIO9_IO18				0x158 0x39C 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_19_FLEXPWM4_PWM1_X			0x158 0x39C 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_20_SAI1_RX_DATA00			0x15C 0x3A0 0x674 0x0 0x0
+#define IOMUXC_GPIO_AD_20_ACMP4_OUT				0x15C 0x3A0 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_20_LPSPI1_PCS3				0x15C 0x3A0 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_20_FLEXSPI1_A_DATA00			0x15C 0x3A0 0x554 0x3 0x0
+#define IOMUXC_GPIO_AD_20_VIDEO_MUX_CSI_DATA05			0x15C 0x3A0 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_20_GPIO_MUX3_IO19			0x15C 0x3A0 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_20_KPP_ROW07				0x15C 0x3A0 0x5A8 0x6 0x0
+#define IOMUXC_GPIO_AD_20_FLEXIO2_D20				0x15C 0x3A0 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_20_ENET_QOS_1588_EVENT2_OUT		0x15C 0x3A0 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_20_GPIO9_IO19				0x15C 0x3A0 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_20_FLEXPWM4_PWM2_X			0x15C 0x3A0 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_21_SAI1_TX_DATA00			0x160 0x3A4 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_21_LPSPI2_PCS1				0x160 0x3A4 0x5E0 0x2 0x0
+#define IOMUXC_GPIO_AD_21_FLEXSPI1_A_DATA01			0x160 0x3A4 0x558 0x3 0x0
+#define IOMUXC_GPIO_AD_21_VIDEO_MUX_CSI_DATA04			0x160 0x3A4 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_21_GPIO_MUX3_IO20			0x160 0x3A4 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_21_KPP_COL07				0x160 0x3A4 0x5A0 0x6 0x0
+#define IOMUXC_GPIO_AD_21_FLEXIO2_D21				0x160 0x3A4 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_21_ENET_QOS_1588_EVENT2_IN		0x160 0x3A4 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_21_GPIO9_IO20				0x160 0x3A4 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_21_FLEXPWM4_PWM3_X			0x160 0x3A4 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_22_GPIO9_IO21				0x164 0x3A8 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_22_SAI1_TX_BCLK				0x164 0x3A8 0x67C 0x0 0x0
+#define IOMUXC_GPIO_AD_22_LPSPI2_PCS2				0x164 0x3A8 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_22_FLEXSPI1_A_DATA02			0x164 0x3A8 0x55C 0x3 0x0
+#define IOMUXC_GPIO_AD_22_VIDEO_MUX_CSI_DATA03			0x164 0x3A8 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_22_GPIO_MUX3_IO21			0x164 0x3A8 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_22_KPP_ROW06				0x164 0x3A8 0x5A4 0x6 0x0
+#define IOMUXC_GPIO_AD_22_FLEXIO2_D22				0x164 0x3A8 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_22_ENET_QOS_1588_EVENT3_OUT		0x164 0x3A8 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_AD_23_SAI1_TX_SYNC				0x168 0x3AC 0x680 0x0 0x0
+#define IOMUXC_GPIO_AD_23_LPSPI2_PCS3				0x168 0x3AC 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_23_FLEXSPI1_A_DATA03			0x168 0x3AC 0x560 0x3 0x0
+#define IOMUXC_GPIO_AD_23_VIDEO_MUX_CSI_DATA02			0x168 0x3AC 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_23_GPIO_MUX3_IO22			0x168 0x3AC 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_23_KPP_COL06				0x168 0x3AC 0x59C 0x6 0x0
+#define IOMUXC_GPIO_AD_23_FLEXIO2_D23				0x168 0x3AC 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_23_ENET_QOS_1588_EVENT3_IN		0x168 0x3AC 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_23_GPIO9_IO22				0x168 0x3AC 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_AD_24_LPUART1_TXD				0x16C 0x3B0 0x620 0x0 0x0
+#define IOMUXC_GPIO_AD_24_LPSPI2_SCK				0x16C 0x3B0 0x5E4 0x1 0x0
+#define IOMUXC_GPIO_AD_24_VIDEO_MUX_CSI_DATA00			0x16C 0x3B0 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_24_ENET_RX_EN				0x16C 0x3B0 0x4B8 0x3 0x0
+#define IOMUXC_GPIO_AD_24_FLEXPWM2_PWM0_A			0x16C 0x3B0 0x518 0x4 0x1
+#define IOMUXC_GPIO_AD_24_GPIO_MUX3_IO23			0x16C 0x3B0 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_24_KPP_ROW05				0x16C 0x3B0 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_24_FLEXIO2_D24				0x16C 0x3B0 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_24_LPI2C4_SCL				0x16C 0x3B0 0x5C4 0x9 0x0
+#define IOMUXC_GPIO_AD_24_GPIO9_IO23				0x16C 0x3B0 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_AD_25_GPIO9_IO24				0x170 0x3B4 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_25_LPUART1_RXD				0x170 0x3B4 0x61C 0x0 0x0
+#define IOMUXC_GPIO_AD_25_LPSPI2_PCS0				0x170 0x3B4 0x5DC 0x1 0x0
+#define IOMUXC_GPIO_AD_25_VIDEO_MUX_CSI_DATA01			0x170 0x3B4 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_25_ENET_RX_ER				0x170 0x3B4 0x4BC 0x3 0x0
+#define IOMUXC_GPIO_AD_25_FLEXPWM2_PWM0_B			0x170 0x3B4 0x524 0x4 0x1
+#define IOMUXC_GPIO_AD_25_GPIO_MUX3_IO24			0x170 0x3B4 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_25_KPP_COL05				0x170 0x3B4 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_25_FLEXIO2_D25				0x170 0x3B4 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_25_LPI2C4_SDA				0x170 0x3B4 0x5C8 0x9 0x0
+
+#define IOMUXC_GPIO_AD_26_LPUART1_CTS_B				0x174 0x3B8 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_26_LPSPI2_SOUT				0x174 0x3B8 0x5EC 0x1 0x0
+#define IOMUXC_GPIO_AD_26_SEMC_CSX01				0x174 0x3B8 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_26_ENET_RX_DATA00			0x174 0x3B8 0x4B0 0x3 0x0
+#define IOMUXC_GPIO_AD_26_FLEXPWM2_PWM1_A			0x174 0x3B8 0x51C 0x4 0x1
+#define IOMUXC_GPIO_AD_26_GPIO_MUX3_IO25			0x174 0x3B8 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_26_KPP_ROW04				0x174 0x3B8 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_26_FLEXIO2_D26				0x174 0x3B8 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_26_ENET_QOS_MDC				0x174 0x3B8 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_26_GPIO9_IO25				0x174 0x3B8 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_26_USDHC2_CD_B				0x174 0x3B8 0x6D0 0xB 0x1
+
+#define IOMUXC_GPIO_AD_27_LPUART1_RTS_B				0x178 0x3BC 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_27_LPSPI2_SIN				0x178 0x3BC 0x5E8 0x1 0x0
+#define IOMUXC_GPIO_AD_27_SEMC_CSX02				0x178 0x3BC 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_27_ENET_RX_DATA01			0x178 0x3BC 0x4B4 0x3 0x0
+#define IOMUXC_GPIO_AD_27_FLEXPWM2_PWM1_B			0x178 0x3BC 0x528 0x4 0x1
+#define IOMUXC_GPIO_AD_27_GPIO_MUX3_IO26			0x178 0x3BC 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_27_KPP_COL04				0x178 0x3BC 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_27_FLEXIO2_D27				0x178 0x3BC 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_27_ENET_QOS_MDIO				0x178 0x3BC 0x4EC 0x9 0x1
+#define IOMUXC_GPIO_AD_27_GPIO9_IO26				0x178 0x3BC 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_27_USDHC2_WP				0x178 0x3BC 0x6D4 0xB 0x1
+
+#define IOMUXC_GPIO_AD_28_GPIO9_IO27				0x17C 0x3C0 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_28_USDHC2_VSELECT			0x17C 0x3C0 0x0 0xB 0x0
+#define IOMUXC_GPIO_AD_28_LPSPI1_SCK				0x17C 0x3C0 0x5D0 0x0 0x1
+#define IOMUXC_GPIO_AD_28_LPUART5_TXD				0x17C 0x3C0 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_28_SEMC_CSX03				0x17C 0x3C0 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_28_ENET_TX_EN				0x17C 0x3C0 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_28_FLEXPWM2_PWM2_A			0x17C 0x3C0 0x520 0x4 0x1
+#define IOMUXC_GPIO_AD_28_GPIO_MUX3_IO27			0x17C 0x3C0 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_28_KPP_ROW03				0x17C 0x3C0 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_28_FLEXIO2_D28				0x17C 0x3C0 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_28_VIDEO_MUX_EXT_DCIC1			0x17C 0x3C0 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_AD_29_LPSPI1_PCS0				0x180 0x3C4 0x5CC 0x0 0x1
+#define IOMUXC_GPIO_AD_29_LPUART5_RXD				0x180 0x3C4 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_29_ENET_REF_CLK				0x180 0x3C4 0x4A8 0x2 0x0
+#define IOMUXC_GPIO_AD_29_ENET_TX_CLK				0x180 0x3C4 0x4C0 0x3 0x0
+#define IOMUXC_GPIO_AD_29_FLEXPWM2_PWM2_B			0x180 0x3C4 0x52C 0x4 0x1
+#define IOMUXC_GPIO_AD_29_GPIO_MUX3_IO28			0x180 0x3C4 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_29_KPP_COL03				0x180 0x3C4 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_29_FLEXIO2_D29				0x180 0x3C4 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_29_VIDEO_MUX_EXT_DCIC2			0x180 0x3C4 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_29_GPIO9_IO28				0x180 0x3C4 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_29_USDHC2_RESET_B			0x180 0x3C4 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_30_LPSPI1_SOUT				0x184 0x3C8 0x5D8 0x0 0x1
+#define IOMUXC_GPIO_AD_30_USB_OTG2_OC				0x184 0x3C8 0x6B8 0x1 0x1
+#define IOMUXC_GPIO_AD_30_FLEXCAN2_TX				0x184 0x3C8 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_30_ENET_TX_DATA00			0x184 0x3C8 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_30_LPUART3_TXD				0x184 0x3C8 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_30_GPIO_MUX3_IO29			0x184 0x3C8 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_30_KPP_ROW02				0x184 0x3C8 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_30_FLEXIO2_D30				0x184 0x3C8 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_30_WDOG2_RESET_B_DEB			0x184 0x3C8 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_30_GPIO9_IO29				0x184 0x3C8 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_AD_31_LPSPI1_SIN				0x188 0x3CC 0x5D4 0x0 0x1
+#define IOMUXC_GPIO_AD_31_USB_OTG2_PWR				0x188 0x3CC 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_31_FLEXCAN2_RX				0x188 0x3CC 0x49C 0x2 0x1
+#define IOMUXC_GPIO_AD_31_ENET_TX_DATA01			0x188 0x3CC 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_31_LPUART3_RXD				0x188 0x3CC 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_31_GPIO_MUX3_IO30			0x188 0x3CC 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_31_KPP_COL02				0x188 0x3CC 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_31_FLEXIO2_D31				0x188 0x3CC 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_31_WDOG1_RESET_B_DEB			0x188 0x3CC 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_31_GPIO9_IO30				0x188 0x3CC 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_AD_32_GPIO9_IO31				0x18C 0x3D0 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_32_LPI2C1_SCL				0x18C 0x3D0 0x5AC 0x0 0x1
+#define IOMUXC_GPIO_AD_32_USBPHY2_OTG_ID			0x18C 0x3D0 0x6C4 0x1 0x1
+#define IOMUXC_GPIO_AD_32_PGMC_PMIC_RDY				0x18C 0x3D0 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_32_ENET_MDC				0x18C 0x3D0 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_32_USDHC1_CD_B				0x18C 0x3D0 0x6C8 0x4 0x0
+#define IOMUXC_GPIO_AD_32_GPIO_MUX3_IO31			0x18C 0x3D0 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_32_KPP_ROW01				0x18C 0x3D0 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_32_LPUART10_TXD				0x18C 0x3D0 0x628 0x8 0x1
+#define IOMUXC_GPIO_AD_32_ENET_1G_MDC				0x18C 0x3D0 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_AD_33_LPI2C1_SDA				0x190 0x3D4 0x5B0 0x0 0x1
+#define IOMUXC_GPIO_AD_33_USBPHY1_OTG_ID			0x190 0x3D4 0x6C0 0x1 0x1
+#define IOMUXC_GPIO_AD_33_XBAR1_INOUT17				0x190 0x3D4 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_33_ENET_MDIO				0x190 0x3D4 0x4AC 0x3 0x1
+#define IOMUXC_GPIO_AD_33_USDHC1_WP				0x190 0x3D4 0x6CC 0x4 0x0
+#define IOMUXC_GPIO_AD_33_GPIO_MUX4_IO00			0x190 0x3D4 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_33_KPP_COL01				0x190 0x3D4 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_33_LPUART10_RXD				0x190 0x3D4 0x624 0x8 0x1
+#define IOMUXC_GPIO_AD_33_ENET_1G_MDIO				0x190 0x3D4 0x4C8 0x9 0x3
+#define IOMUXC_GPIO_AD_33_GPIO10_IO00				0x190 0x3D4 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_AD_34_ENET_1G_1588_EVENT0_IN		0x194 0x3D8 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_34_USB_OTG1_PWR				0x194 0x3D8 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_34_XBAR1_INOUT18				0x194 0x3D8 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_34_ENET_1588_EVENT0_IN			0x194 0x3D8 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_34_USDHC1_VSELECT			0x194 0x3D8 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_34_GPIO_MUX4_IO01			0x194 0x3D8 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_34_KPP_ROW00				0x194 0x3D8 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_34_LPUART10_CTS_B			0x194 0x3D8 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_34_WDOG1_ANY				0x194 0x3D8 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_34_GPIO10_IO01				0x194 0x3D8 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_AD_35_GPIO10_IO02				0x198 0x3DC 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_35_ENET_1G_1588_EVENT0_OUT		0x198 0x3DC 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_35_USB_OTG1_OC				0x198 0x3DC 0x6BC 0x1 0x1
+#define IOMUXC_GPIO_AD_35_XBAR1_INOUT19				0x198 0x3DC 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_35_ENET_1588_EVENT0_OUT			0x198 0x3DC 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_35_USDHC1_RESET_B			0x198 0x3DC 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_35_GPIO_MUX4_IO02			0x198 0x3DC 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_35_KPP_COL00				0x198 0x3DC 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_35_LPUART10_RTS_B			0x198 0x3DC 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_35_FLEXSPI1_B_SS1_B			0x198 0x3DC 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_SD_B1_00_USDHC1_CMD				0x19C 0x3E0 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B1_00_XBAR1_INOUT20			0x19C 0x3E0 0x6D8 0x2 0x1
+#define IOMUXC_GPIO_SD_B1_00_GPT4_CAPTURE1			0x19C 0x3E0 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B1_00_GPIO_MUX4_IO03			0x19C 0x3E0 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B1_00_FLEXSPI2_A_SS0_B			0x19C 0x3E0 0x0 0x6 0x0
+#define IOMUXC_GPIO_SD_B1_00_KPP_ROW07				0x19C 0x3E0 0x5A8 0x8 0x1
+#define IOMUXC_GPIO_SD_B1_00_GPIO10_IO03			0x19C 0x3E0 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_SD_B1_01_USDHC1_CLK				0x1A0 0x3E4 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B1_01_XBAR1_INOUT21			0x1A0 0x3E4 0x6DC 0x2 0x1
+#define IOMUXC_GPIO_SD_B1_01_GPT4_CAPTURE2			0x1A0 0x3E4 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B1_01_GPIO_MUX4_IO04			0x1A0 0x3E4 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B1_01_FLEXSPI2_A_SCLK			0x1A0 0x3E4 0x58C 0x6 0x1
+#define IOMUXC_GPIO_SD_B1_01_KPP_COL07				0x1A0 0x3E4 0x5A0 0x8 0x1
+#define IOMUXC_GPIO_SD_B1_01_GPIO10_IO04			0x1A0 0x3E4 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_SD_B1_02_GPIO10_IO05			0x1A4 0x3E8 0x0 0xA 0x0
+#define IOMUXC_GPIO_SD_B1_02_USDHC1_DATA0			0x1A4 0x3E8 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B1_02_XBAR1_INOUT22			0x1A4 0x3E8 0x6E0 0x2 0x1
+#define IOMUXC_GPIO_SD_B1_02_GPT4_COMPARE1			0x1A4 0x3E8 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B1_02_GPIO_MUX4_IO05			0x1A4 0x3E8 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B1_02_FLEXSPI2_A_DATA00			0x1A4 0x3E8 0x57C 0x6 0x1
+#define IOMUXC_GPIO_SD_B1_02_KPP_ROW06				0x1A4 0x3E8 0x5A4 0x8 0x1
+#define IOMUXC_GPIO_SD_B1_02_FLEXSPI1_A_SS1_B			0x1A4 0x3E8 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_SD_B1_03_USDHC1_DATA1			0x1A8 0x3EC 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B1_03_XBAR1_INOUT23			0x1A8 0x3EC 0x6E4 0x2 0x1
+#define IOMUXC_GPIO_SD_B1_03_GPT4_COMPARE2			0x1A8 0x3EC 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B1_03_GPIO_MUX4_IO06			0x1A8 0x3EC 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B1_03_FLEXSPI2_A_DATA01			0x1A8 0x3EC 0x580 0x6 0x1
+#define IOMUXC_GPIO_SD_B1_03_KPP_COL06				0x1A8 0x3EC 0x59C 0x8 0x1
+#define IOMUXC_GPIO_SD_B1_03_FLEXSPI1_B_SS1_B			0x1A8 0x3EC 0x0 0x9 0x0
+#define IOMUXC_GPIO_SD_B1_03_GPIO10_IO06			0x1A8 0x3EC 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_SD_B1_04_USDHC1_DATA2			0x1AC 0x3F0 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B1_04_XBAR1_INOUT24			0x1AC 0x3F0 0x6E8 0x2 0x1
+#define IOMUXC_GPIO_SD_B1_04_GPT4_COMPARE3			0x1AC 0x3F0 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B1_04_GPIO_MUX4_IO07			0x1AC 0x3F0 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B1_04_FLEXSPI2_A_DATA02			0x1AC 0x3F0 0x584 0x6 0x1
+#define IOMUXC_GPIO_SD_B1_04_FLEXSPI1_B_SS0_B			0x1AC 0x3F0 0x0 0x8 0x0
+#define IOMUXC_GPIO_SD_B1_04_ENET_QOS_1588_EVENT2_AUX_IN	0x1AC 0x3F0 0x0 0x9 0x0
+#define IOMUXC_GPIO_SD_B1_04_GPIO10_IO07			0x1AC 0x3F0 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_SD_B1_05_GPIO10_IO08			0x1B0 0x3F4 0x0 0xA 0x0
+#define IOMUXC_GPIO_SD_B1_05_USDHC1_DATA3			0x1B0 0x3F4 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B1_05_XBAR1_INOUT25			0x1B0 0x3F4 0x6EC 0x2 0x1
+#define IOMUXC_GPIO_SD_B1_05_GPT4_CLK				0x1B0 0x3F4 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B1_05_GPIO_MUX4_IO08			0x1B0 0x3F4 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B1_05_FLEXSPI2_A_DATA03			0x1B0 0x3F4 0x588 0x6 0x1
+#define IOMUXC_GPIO_SD_B1_05_FLEXSPI1_B_DQS			0x1B0 0x3F4 0x0 0x8 0x0
+#define IOMUXC_GPIO_SD_B1_05_ENET_QOS_1588_EVENT3_AUX_IN	0x1B0 0x3F4 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_SD_B2_00_GPIO10_IO09			0x1B4 0x3F8 0x0 0xA 0x0
+#define IOMUXC_GPIO_SD_B2_00_USDHC2_DATA3			0x1B4 0x3F8 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_00_FLEXSPI1_B_DATA03			0x1B4 0x3F8 0x570 0x1 0x1
+#define IOMUXC_GPIO_SD_B2_00_ENET_1G_RX_EN			0x1B4 0x3F8 0x4E0 0x2 0x1
+#define IOMUXC_GPIO_SD_B2_00_LPUART9_TXD			0x1B4 0x3F8 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B2_00_LPSPI4_SCK				0x1B4 0x3F8 0x610 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_00_GPIO_MUX4_IO09			0x1B4 0x3F8 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SD_B2_01_USDHC2_DATA2			0x1B8 0x3FC 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_01_FLEXSPI1_B_DATA02			0x1B8 0x3FC 0x56C 0x1 0x1
+#define IOMUXC_GPIO_SD_B2_01_ENET_1G_RX_CLK			0x1B8 0x3FC 0x4CC 0x2 0x1
+#define IOMUXC_GPIO_SD_B2_01_LPUART9_RXD			0x1B8 0x3FC 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B2_01_LPSPI4_PCS0			0x1B8 0x3FC 0x60C 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_01_GPIO_MUX4_IO10			0x1B8 0x3FC 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B2_01_GPIO10_IO10			0x1B8 0x3FC 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_SD_B2_02_GPIO10_IO11			0x1BC 0x400 0x0 0xA 0x0
+#define IOMUXC_GPIO_SD_B2_02_USDHC2_DATA1			0x1BC 0x400 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_02_FLEXSPI1_B_DATA01			0x1BC 0x400 0x568 0x1 0x1
+#define IOMUXC_GPIO_SD_B2_02_ENET_1G_RX_DATA00			0x1BC 0x400 0x4D0 0x2 0x1
+#define IOMUXC_GPIO_SD_B2_02_LPUART9_CTS_B			0x1BC 0x400 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B2_02_LPSPI4_SOUT			0x1BC 0x400 0x618 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_02_GPIO_MUX4_IO11			0x1BC 0x400 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SD_B2_03_GPIO10_IO12			0x1C0 0x404 0x0 0xA 0x0
+#define IOMUXC_GPIO_SD_B2_03_USDHC2_DATA0			0x1C0 0x404 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_03_FLEXSPI1_B_DATA00			0x1C0 0x404 0x564 0x1 0x1
+#define IOMUXC_GPIO_SD_B2_03_ENET_1G_RX_DATA01			0x1C0 0x404 0x4D4 0x2 0x1
+#define IOMUXC_GPIO_SD_B2_03_LPUART9_RTS_B			0x1C0 0x404 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B2_03_LPSPI4_SIN				0x1C0 0x404 0x614 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_03_GPIO_MUX4_IO12			0x1C0 0x404 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SD_B2_04_USDHC2_CLK				0x1C4 0x408 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_04_FLEXSPI1_B_SCLK			0x1C4 0x408 0x578 0x1 0x1
+#define IOMUXC_GPIO_SD_B2_04_ENET_1G_RX_DATA02			0x1C4 0x408 0x4D8 0x2 0x1
+#define IOMUXC_GPIO_SD_B2_04_FLEXSPI1_A_SS1_B			0x1C4 0x408 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B2_04_LPSPI4_PCS1			0x1C4 0x408 0x0 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_04_GPIO_MUX4_IO13			0x1C4 0x408 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B2_04_GPIO10_IO13			0x1C4 0x408 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_SD_B2_05_GPIO10_IO14			0x1C8 0x40C 0x0 0xA 0x0
+#define IOMUXC_GPIO_SD_B2_05_USDHC2_CMD				0x1C8 0x40C 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_05_FLEXSPI1_A_DQS			0x1C8 0x40C 0x550 0x1 0x2
+#define IOMUXC_GPIO_SD_B2_05_ENET_1G_RX_DATA03			0x1C8 0x40C 0x4DC 0x2 0x1
+#define IOMUXC_GPIO_SD_B2_05_FLEXSPI1_B_SS0_B			0x1C8 0x40C 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B2_05_LPSPI4_PCS2			0x1C8 0x40C 0x0 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_05_GPIO_MUX4_IO14			0x1C8 0x40C 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SD_B2_06_GPIO10_IO15			0x1CC 0x410 0x0 0xA 0x0
+#define IOMUXC_GPIO_SD_B2_06_USDHC2_RESET_B			0x1CC 0x410 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_06_FLEXSPI1_A_SS0_B			0x1CC 0x410 0x0 0x1 0x0
+#define IOMUXC_GPIO_SD_B2_06_ENET_1G_TX_DATA03			0x1CC 0x410 0x0 0x2 0x0
+#define IOMUXC_GPIO_SD_B2_06_LPSPI4_PCS3			0x1CC 0x410 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B2_06_GPT6_CAPTURE1			0x1CC 0x410 0x0 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_06_GPIO_MUX4_IO15			0x1CC 0x410 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SD_B2_07_USDHC2_STROBE			0x1D0 0x414 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_07_FLEXSPI1_A_SCLK			0x1D0 0x414 0x574 0x1 0x1
+#define IOMUXC_GPIO_SD_B2_07_ENET_1G_TX_DATA02			0x1D0 0x414 0x0 0x2 0x0
+#define IOMUXC_GPIO_SD_B2_07_LPUART3_CTS_B			0x1D0 0x414 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B2_07_GPT6_CAPTURE2			0x1D0 0x414 0x0 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_07_GPIO_MUX4_IO16			0x1D0 0x414 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B2_07_LPSPI2_SCK				0x1D0 0x414 0x5E4 0x6 0x1
+#define IOMUXC_GPIO_SD_B2_07_ENET_TX_ER				0x1D0 0x414 0x0 0x8 0x0
+#define IOMUXC_GPIO_SD_B2_07_ENET_QOS_REF_CLK			0x1D0 0x414 0x4A0 0x9 0x1
+#define IOMUXC_GPIO_SD_B2_07_GPIO10_IO16			0x1D0 0x414 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_SD_B2_08_GPIO10_IO17			0x1D4 0x418 0x0 0xA 0x0
+#define IOMUXC_GPIO_SD_B2_08_USDHC2_DATA4			0x1D4 0x418 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_08_FLEXSPI1_A_DATA00			0x1D4 0x418 0x554 0x1 0x1
+#define IOMUXC_GPIO_SD_B2_08_ENET_1G_TX_DATA01			0x1D4 0x418 0x0 0x2 0x0
+#define IOMUXC_GPIO_SD_B2_08_LPUART3_RTS_B			0x1D4 0x418 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B2_08_GPT6_COMPARE1			0x1D4 0x418 0x0 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_08_GPIO_MUX4_IO17			0x1D4 0x418 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B2_08_LPSPI2_PCS0			0x1D4 0x418 0x5DC 0x6 0x1
+
+#define IOMUXC_GPIO_SD_B2_09_GPIO10_IO18			0x1D8 0x41C 0x0 0xA 0x0
+#define IOMUXC_GPIO_SD_B2_09_USDHC2_DATA5			0x1D8 0x41C 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_09_FLEXSPI1_A_DATA01			0x1D8 0x41C 0x558 0x1 0x1
+#define IOMUXC_GPIO_SD_B2_09_ENET_1G_TX_DATA00			0x1D8 0x41C 0x0 0x2 0x0
+#define IOMUXC_GPIO_SD_B2_09_LPUART5_CTS_B			0x1D8 0x41C 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B2_09_GPT6_COMPARE2			0x1D8 0x41C 0x0 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_09_GPIO_MUX4_IO18			0x1D8 0x41C 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B2_09_LPSPI2_SOUT			0x1D8 0x41C 0x5EC 0x6 0x1
+
+#define IOMUXC_GPIO_SD_B2_10_GPIO10_IO19			0x1DC 0x420 0x0 0xA 0x0
+#define IOMUXC_GPIO_SD_B2_10_USDHC2_DATA6			0x1DC 0x420 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_10_FLEXSPI1_A_DATA02			0x1DC 0x420 0x55C 0x1 0x1
+#define IOMUXC_GPIO_SD_B2_10_ENET_1G_TX_EN			0x1DC 0x420 0x0 0x2 0x0
+#define IOMUXC_GPIO_SD_B2_10_LPUART5_RTS_B			0x1DC 0x420 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B2_10_GPT6_COMPARE3			0x1DC 0x420 0x0 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_10_GPIO_MUX4_IO19			0x1DC 0x420 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B2_10_LPSPI2_SIN				0x1DC 0x420 0x5E8 0x6 0x1
+
+#define IOMUXC_GPIO_SD_B2_11_USDHC2_DATA7			0x1E0 0x424 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_11_FLEXSPI1_A_DATA03			0x1E0 0x424 0x560 0x1 0x1
+#define IOMUXC_GPIO_SD_B2_11_ENET_1G_TX_CLK_IO			0x1E0 0x424 0x4E8 0x2 0x1
+#define IOMUXC_GPIO_SD_B2_11_ENET_1G_REF_CLK			0x1E0 0x424 0x4C4 0x3 0x1
+#define IOMUXC_GPIO_SD_B2_11_GPT6_CLK				0x1E0 0x424 0x0 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_11_GPIO_MUX4_IO20			0x1E0 0x424 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B2_11_LPSPI2_PCS1			0x1E0 0x424 0x5E0 0x6 0x1
+#define IOMUXC_GPIO_SD_B2_11_GPIO10_IO20			0x1E0 0x424 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B1_00_VIDEO_MUX_LCDIF_CLK		0x1E4 0x428 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_00_ENET_1G_RX_EN			0x1E4 0x428 0x4E0 0x1 0x2
+#define IOMUXC_GPIO_DISP_B1_00_TMR1_TIMER0			0x1E4 0x428 0x63C 0x3 0x2
+#define IOMUXC_GPIO_DISP_B1_00_XBAR1_INOUT26			0x1E4 0x428 0x6F0 0x4 0x1
+#define IOMUXC_GPIO_DISP_B1_00_GPIO_MUX4_IO21			0x1E4 0x428 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_00_ENET_QOS_RX_EN			0x1E4 0x428 0x4F8 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_00_GPIO10_IO21			0x1E4 0x428 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B1_01_VIDEO_MUX_LCDIF_ENABLE		0x1E8 0x42C 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_01_ENET_1G_RX_CLK			0x1E8 0x42C 0x4CC 0x1 0x2
+#define IOMUXC_GPIO_DISP_B1_01_ENET_1G_RX_ER			0x1E8 0x42C 0x4E4 0x2 0x1
+#define IOMUXC_GPIO_DISP_B1_01_TMR1_TIMER1			0x1E8 0x42C 0x640 0x3 0x2
+#define IOMUXC_GPIO_DISP_B1_01_XBAR1_INOUT27			0x1E8 0x42C 0x6F4 0x4 0x1
+#define IOMUXC_GPIO_DISP_B1_01_GPIO_MUX4_IO22			0x1E8 0x42C 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_01_ENET_QOS_RX_CLK			0x1E8 0x42C 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_01_ENET_QOS_RX_ER			0x1E8 0x42C 0x4FC 0x9 0x0
+#define IOMUXC_GPIO_DISP_B1_01_GPIO10_IO22			0x1E8 0x42C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B1_02_GPIO10_IO23			0x1EC 0x430 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B1_02_VIDEO_MUX_LCDIF_HSYNC		0x1EC 0x430 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_02_ENET_1G_RX_DATA00		0x1EC 0x430 0x4D0 0x1 0x2
+#define IOMUXC_GPIO_DISP_B1_02_LPI2C3_SCL			0x1EC 0x430 0x5BC 0x2 0x0
+#define IOMUXC_GPIO_DISP_B1_02_TMR1_TIMER2			0x1EC 0x430 0x644 0x3 0x1
+#define IOMUXC_GPIO_DISP_B1_02_XBAR1_INOUT28			0x1EC 0x430 0x6F8 0x4 0x1
+#define IOMUXC_GPIO_DISP_B1_02_GPIO_MUX4_IO23			0x1EC 0x430 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_02_ENET_QOS_RX_DATA00		0x1EC 0x430 0x4F0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_02_LPUART1_TXD			0x1EC 0x430 0x620 0x9 0x1
+
+#define IOMUXC_GPIO_DISP_B1_03_VIDEO_MUX_LCDIF_VSYNC		0x1F0 0x434 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_03_ENET_1G_RX_DATA01		0x1F0 0x434 0x4D4 0x1 0x2
+#define IOMUXC_GPIO_DISP_B1_03_LPI2C3_SDA			0x1F0 0x434 0x5C0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B1_03_TMR2_TIMER0			0x1F0 0x434 0x648 0x3 0x2
+#define IOMUXC_GPIO_DISP_B1_03_XBAR1_INOUT29			0x1F0 0x434 0x6FC 0x4 0x1
+#define IOMUXC_GPIO_DISP_B1_03_GPIO_MUX4_IO24			0x1F0 0x434 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_03_ENET_QOS_RX_DATA01		0x1F0 0x434 0x4F4 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_03_LPUART1_RXD			0x1F0 0x434 0x61C 0x9 0x1
+#define IOMUXC_GPIO_DISP_B1_03_GPIO10_IO24			0x1F0 0x434 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B1_04_VIDEO_MUX_LCDIF_DATA00		0x1F4 0x438 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_04_ENET_1G_RX_DATA02		0x1F4 0x438 0x4D8 0x1 0x2
+#define IOMUXC_GPIO_DISP_B1_04_LPUART4_RXD			0x1F4 0x438 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B1_04_TMR2_TIMER1			0x1F4 0x438 0x64C 0x3 0x2
+#define IOMUXC_GPIO_DISP_B1_04_XBAR1_INOUT30			0x1F4 0x438 0x700 0x4 0x1
+#define IOMUXC_GPIO_DISP_B1_04_GPIO_MUX4_IO25			0x1F4 0x438 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_04_ENET_QOS_RX_DATA02		0x1F4 0x438 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_04_LPSPI3_SCK			0x1F4 0x438 0x600 0x9 0x1
+#define IOMUXC_GPIO_DISP_B1_04_GPIO10_IO25			0x1F4 0x438 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B1_05_GPIO10_IO26			0x1F8 0x43C 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B1_05_VIDEO_MUX_LCDIF_DATA01		0x1F8 0x43C 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_05_ENET_1G_RX_DATA03		0x1F8 0x43C 0x4DC 0x1 0x2
+#define IOMUXC_GPIO_DISP_B1_05_LPUART4_CTS_B			0x1F8 0x43C 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B1_05_TMR2_TIMER2			0x1F8 0x43C 0x650 0x3 0x1
+#define IOMUXC_GPIO_DISP_B1_05_XBAR1_INOUT31			0x1F8 0x43C 0x704 0x4 0x1
+#define IOMUXC_GPIO_DISP_B1_05_GPIO_MUX4_IO26			0x1F8 0x43C 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_05_ENET_QOS_RX_DATA03		0x1F8 0x43C 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_05_LPSPI3_SIN			0x1F8 0x43C 0x604 0x9 0x1
+
+#define IOMUXC_GPIO_DISP_B1_06_VIDEO_MUX_LCDIF_DATA02		0x1FC 0x440 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_06_ENET_1G_TX_DATA03		0x1FC 0x440 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B1_06_LPUART4_TXD			0x1FC 0x440 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B1_06_TMR3_TIMER0			0x1FC 0x440 0x654 0x3 0x2
+#define IOMUXC_GPIO_DISP_B1_06_XBAR1_INOUT32			0x1FC 0x440 0x708 0x4 0x1
+#define IOMUXC_GPIO_DISP_B1_06_GPIO_MUX4_IO27			0x1FC 0x440 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_06_SRC_BT_CFG00			0x1FC 0x440 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B1_06_ENET_QOS_TX_DATA03		0x1FC 0x440 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_06_LPSPI3_SOUT			0x1FC 0x440 0x608 0x9 0x1
+#define IOMUXC_GPIO_DISP_B1_06_GPIO10_IO27			0x1FC 0x440 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B1_07_VIDEO_MUX_LCDIF_DATA03		0x200 0x444 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_07_ENET_1G_TX_DATA02		0x200 0x444 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B1_07_LPUART4_RTS_B			0x200 0x444 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B1_07_TMR3_TIMER1			0x200 0x444 0x658 0x3 0x2
+#define IOMUXC_GPIO_DISP_B1_07_XBAR1_INOUT33			0x200 0x444 0x70C 0x4 0x1
+#define IOMUXC_GPIO_DISP_B1_07_GPIO_MUX4_IO28			0x200 0x444 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_07_SRC_BT_CFG01			0x200 0x444 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B1_07_ENET_QOS_TX_DATA02		0x200 0x444 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_07_LPSPI3_PCS0			0x200 0x444 0x5F0 0x9 0x1
+#define IOMUXC_GPIO_DISP_B1_07_GPIO10_IO28			0x200 0x444 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B1_08_GPIO10_IO29			0x204 0x448 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B1_08_VIDEO_MUX_LCDIF_DATA04		0x204 0x448 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_08_ENET_1G_TX_DATA01		0x204 0x448 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B1_08_USDHC1_CD_B			0x204 0x448 0x6C8 0x2 0x1
+#define IOMUXC_GPIO_DISP_B1_08_TMR3_TIMER2			0x204 0x448 0x65C 0x3 0x1
+#define IOMUXC_GPIO_DISP_B1_08_XBAR1_INOUT34			0x204 0x448 0x710 0x4 0x1
+#define IOMUXC_GPIO_DISP_B1_08_GPIO_MUX4_IO29			0x204 0x448 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_08_SRC_BT_CFG02			0x204 0x448 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B1_08_ENET_QOS_TX_DATA01		0x204 0x448 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_08_LPSPI3_PCS1			0x204 0x448 0x5F4 0x9 0x1
+
+#define IOMUXC_GPIO_DISP_B1_09_VIDEO_MUX_LCDIF_DATA05		0x208 0x44C 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_09_ENET_1G_TX_DATA00		0x208 0x44C 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B1_09_USDHC1_WP			0x208 0x44C 0x6CC 0x2 0x1
+#define IOMUXC_GPIO_DISP_B1_09_TMR4_TIMER0			0x208 0x44C 0x660 0x3 0x2
+#define IOMUXC_GPIO_DISP_B1_09_XBAR1_INOUT35			0x208 0x44C 0x714 0x4 0x1
+#define IOMUXC_GPIO_DISP_B1_09_GPIO_MUX4_IO30			0x208 0x44C 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_09_SRC_BT_CFG03			0x208 0x44C 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B1_09_ENET_QOS_TX_DATA00		0x208 0x44C 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_09_LPSPI3_PCS2			0x208 0x44C 0x5F8 0x9 0x1
+#define IOMUXC_GPIO_DISP_B1_09_GPIO10_IO30			0x208 0x44C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B1_10_VIDEO_MUX_LCDIF_DATA06		0x20C 0x450 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_10_ENET_1G_TX_EN			0x20C 0x450 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B1_10_USDHC1_RESET_B			0x20C 0x450 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B1_10_TMR4_TIMER1			0x20C 0x450 0x664 0x3 0x2
+#define IOMUXC_GPIO_DISP_B1_10_XBAR1_INOUT36			0x20C 0x450 0x0 0x4 0x0
+#define IOMUXC_GPIO_DISP_B1_10_GPIO_MUX4_IO31			0x20C 0x450 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_10_SRC_BT_CFG04			0x20C 0x450 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B1_10_ENET_QOS_TX_EN			0x20C 0x450 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_10_LPSPI3_PCS3			0x20C 0x450 0x5FC 0x9 0x1
+#define IOMUXC_GPIO_DISP_B1_10_GPIO10_IO31			0x20C 0x450 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B1_11_VIDEO_MUX_LCDIF_DATA07		0x210 0x454 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_11_ENET_1G_TX_CLK_IO		0x210 0x454 0x4E8 0x1 0x2
+#define IOMUXC_GPIO_DISP_B1_11_ENET_1G_REF_CLK			0x210 0x454 0x4C4 0x2 0x2
+#define IOMUXC_GPIO_DISP_B1_11_TMR4_TIMER2			0x210 0x454 0x668 0x3 0x1
+#define IOMUXC_GPIO_DISP_B1_11_XBAR1_INOUT37			0x210 0x454 0x0 0x4 0x0
+#define IOMUXC_GPIO_DISP_B1_11_GPIO_MUX5_IO00			0x210 0x454 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_11_SRC_BT_CFG05			0x210 0x454 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B1_11_ENET_QOS_TX_CLK			0x210 0x454 0x4A4 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_11_ENET_QOS_REF_CLK			0x210 0x454 0x4A0 0x9 0x2
+#define IOMUXC_GPIO_DISP_B1_11_GPIO11_IO00			0x210 0x454 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B2_00_GPIO11_IO01			0x214 0x458 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B2_00_VIDEO_MUX_LCDIF_DATA08		0x214 0x458 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_00_WDOG1_B				0x214 0x458 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B2_00_MQS_RIGHT			0x214 0x458 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B2_00_ENET_1G_TX_ER			0x214 0x458 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_00_SAI1_TX_DATA03			0x214 0x458 0x0 0x4 0x0
+#define IOMUXC_GPIO_DISP_B2_00_GPIO_MUX5_IO01			0x214 0x458 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_00_SRC_BT_CFG06			0x214 0x458 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B2_00_ENET_QOS_TX_ER			0x214 0x458 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_DISP_B2_01_VIDEO_MUX_LCDIF_DATA09		0x218 0x45C 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_01_USDHC1_VSELECT			0x218 0x45C 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B2_01_MQS_LEFT				0x218 0x45C 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B2_01_WDOG2_B				0x218 0x45C 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_01_SAI1_TX_DATA02			0x218 0x45C 0x0 0x4 0x0
+#define IOMUXC_GPIO_DISP_B2_01_GPIO_MUX5_IO02			0x218 0x45C 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_01_SRC_BT_CFG07			0x218 0x45C 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B2_01_EWM_OUT_B			0x218 0x45C 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B2_01_CCM_ENET_REF_CLK_25M		0x218 0x45C 0x0 0x9 0x0
+#define IOMUXC_GPIO_DISP_B2_01_GPIO11_IO02			0x218 0x45C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B2_02_GPIO11_IO03			0x21C 0x460 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B2_02_VIDEO_MUX_LCDIF_DATA10		0x21C 0x460 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_02_ENET_TX_DATA00			0x21C 0x460 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B2_02_PIT1_TRIGGER3			0x21C 0x460 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B2_02_ARM_TRACE00			0x21C 0x460 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_02_SAI1_TX_DATA01			0x21C 0x460 0x0 0x4 0x0
+#define IOMUXC_GPIO_DISP_B2_02_GPIO_MUX5_IO03			0x21C 0x460 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_02_SRC_BT_CFG08			0x21C 0x460 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B2_02_ENET_QOS_TX_DATA00		0x21C 0x460 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_DISP_B2_03_GPIO11_IO04			0x220 0x464 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B2_03_VIDEO_MUX_LCDIF_DATA11		0x220 0x464 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_03_ENET_TX_DATA01			0x220 0x464 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B2_03_PIT1_TRIGGER2			0x220 0x464 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B2_03_ARM_TRACE01			0x220 0x464 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_03_SAI1_MCLK			0x220 0x464 0x66C 0x4 0x1
+#define IOMUXC_GPIO_DISP_B2_03_GPIO_MUX5_IO04			0x220 0x464 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_03_SRC_BT_CFG09			0x220 0x464 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B2_03_ENET_QOS_TX_DATA01		0x220 0x464 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_DISP_B2_04_VIDEO_MUX_LCDIF_DATA12		0x224 0x468 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_04_ENET_TX_EN			0x224 0x468 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B2_04_PIT1_TRIGGER1			0x224 0x468 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B2_04_ARM_TRACE02			0x224 0x468 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_04_SAI1_RX_SYNC			0x224 0x468 0x678 0x4 0x1
+#define IOMUXC_GPIO_DISP_B2_04_GPIO_MUX5_IO05			0x224 0x468 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_04_SRC_BT_CFG10			0x224 0x468 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B2_04_ENET_QOS_TX_EN			0x224 0x468 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B2_04_GPIO11_IO05			0x224 0x468 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B2_05_GPIO11_IO06			0x228 0x46C 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B2_05_VIDEO_MUX_LCDIF_DATA13		0x228 0x46C 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_05_ENET_TX_CLK			0x228 0x46C 0x4C0 0x1 0x1
+#define IOMUXC_GPIO_DISP_B2_05_ENET_REF_CLK			0x228 0x46C 0x4A8 0x2 0x1
+#define IOMUXC_GPIO_DISP_B2_05_ARM_TRACE03			0x228 0x46C 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_05_SAI1_RX_BCLK			0x228 0x46C 0x670 0x4 0x1
+#define IOMUXC_GPIO_DISP_B2_05_GPIO_MUX5_IO06			0x228 0x46C 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_05_SRC_BT_CFG11			0x228 0x46C 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B2_05_ENET_QOS_TX_CLK			0x228 0x46C 0x4A4 0x8 0x1
+
+#define IOMUXC_GPIO_DISP_B2_06_GPIO11_IO07			0x22C 0x470 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B2_06_VIDEO_MUX_LCDIF_DATA14		0x22C 0x470 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_06_ENET_RX_DATA00			0x22C 0x470 0x4B0 0x1 0x1
+#define IOMUXC_GPIO_DISP_B2_06_LPUART7_TXD			0x22C 0x470 0x630 0x2 0x1
+#define IOMUXC_GPIO_DISP_B2_06_ARM_TRACE_CLK			0x22C 0x470 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_06_SAI1_RX_DATA00			0x22C 0x470 0x674 0x4 0x1
+#define IOMUXC_GPIO_DISP_B2_06_GPIO_MUX5_IO07			0x22C 0x470 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_06_ENET_QOS_RX_DATA00		0x22C 0x470 0x4F0 0x8 0x1
+
+#define IOMUXC_GPIO_DISP_B2_07_VIDEO_MUX_LCDIF_DATA15		0x230 0x474 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_07_ENET_RX_DATA01			0x230 0x474 0x4B4 0x1 0x1
+#define IOMUXC_GPIO_DISP_B2_07_LPUART7_RXD			0x230 0x474 0x62C 0x2 0x1
+#define IOMUXC_GPIO_DISP_B2_07_ARM_TRACE_SWO			0x230 0x474 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_07_SAI1_TX_DATA00			0x230 0x474 0x0 0x4 0x0
+#define IOMUXC_GPIO_DISP_B2_07_GPIO_MUX5_IO08			0x230 0x474 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_07_ENET_QOS_RX_DATA01		0x230 0x474 0x4F4 0x8 0x1
+#define IOMUXC_GPIO_DISP_B2_07_GPIO11_IO08			0x230 0x474 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B2_08_GPIO11_IO09			0x234 0x478 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B2_08_VIDEO_MUX_LCDIF_DATA16		0x234 0x478 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_08_ENET_RX_EN			0x234 0x478 0x4B8 0x1 0x1
+#define IOMUXC_GPIO_DISP_B2_08_LPUART8_TXD			0x234 0x478 0x638 0x2 0x1
+#define IOMUXC_GPIO_DISP_B2_08_ARM_CM7_EVENTO			0x234 0x478 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_08_SAI1_TX_BCLK			0x234 0x478 0x67C 0x4 0x1
+#define IOMUXC_GPIO_DISP_B2_08_GPIO_MUX5_IO09			0x234 0x478 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_08_ENET_QOS_RX_EN			0x234 0x478 0x4F8 0x8 0x1
+#define IOMUXC_GPIO_DISP_B2_08_LPUART1_TXD			0x234 0x478 0x620 0x9 0x2
+
+#define IOMUXC_GPIO_DISP_B2_09_GPIO11_IO10			0x238 0x47C 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B2_09_VIDEO_MUX_LCDIF_DATA17		0x238 0x47C 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_09_ENET_RX_ER			0x238 0x47C 0x4BC 0x1 0x1
+#define IOMUXC_GPIO_DISP_B2_09_LPUART8_RXD			0x238 0x47C 0x634 0x2 0x1
+#define IOMUXC_GPIO_DISP_B2_09_ARM_CM7_EVENTI			0x238 0x47C 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_09_SAI1_TX_SYNC			0x238 0x47C 0x680 0x4 0x1
+#define IOMUXC_GPIO_DISP_B2_09_GPIO_MUX5_IO10			0x238 0x47C 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_09_ENET_QOS_RX_ER			0x238 0x47C 0x4FC 0x8 0x1
+#define IOMUXC_GPIO_DISP_B2_09_LPUART1_RXD			0x238 0x47C 0x61C 0x9 0x2
+
+#define IOMUXC_GPIO_DISP_B2_10_GPIO11_IO11			0x23C 0x480 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B2_10_VIDEO_MUX_LCDIF_DATA18		0x23C 0x480 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_10_EMVSIM2_IO			0x23C 0x480 0x6A8 0x1 0x1
+#define IOMUXC_GPIO_DISP_B2_10_LPUART2_TXD			0x23C 0x480 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B2_10_WDOG2_RESET_B_DEB		0x23C 0x480 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_10_XBAR1_INOUT38			0x23C 0x480 0x0 0x4 0x0
+#define IOMUXC_GPIO_DISP_B2_10_GPIO_MUX5_IO11			0x23C 0x480 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_10_LPI2C3_SCL			0x23C 0x480 0x5BC 0x6 0x1
+#define IOMUXC_GPIO_DISP_B2_10_ENET_QOS_RX_ER			0x23C 0x480 0x4FC 0x8 0x2
+#define IOMUXC_GPIO_DISP_B2_10_SPDIF_IN				0x23C 0x480 0x6B4 0x9 0x2
+
+#define IOMUXC_GPIO_DISP_B2_11_VIDEO_MUX_LCDIF_DATA19		0x240 0x484 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_11_EMVSIM2_CLK			0x240 0x484 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B2_11_LPUART2_RXD			0x240 0x484 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B2_11_WDOG1_RESET_B_DEB		0x240 0x484 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_11_XBAR1_INOUT39			0x240 0x484 0x0 0x4 0x0
+#define IOMUXC_GPIO_DISP_B2_11_GPIO_MUX5_IO12			0x240 0x484 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_11_LPI2C3_SDA			0x240 0x484 0x5C0 0x6 0x1
+#define IOMUXC_GPIO_DISP_B2_11_ENET_QOS_CRS			0x240 0x484 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B2_11_SPDIF_OUT			0x240 0x484 0x0 0x9 0x0
+#define IOMUXC_GPIO_DISP_B2_11_GPIO11_IO12			0x240 0x484 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B2_12_GPIO11_IO13			0x244 0x488 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B2_12_VIDEO_MUX_LCDIF_DATA20		0x244 0x488 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_12_EMVSIM2_RST			0x244 0x488 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B2_12_FLEXCAN1_TX			0x244 0x488 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B2_12_LPUART2_CTS_B			0x244 0x488 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_12_XBAR1_INOUT40			0x244 0x488 0x0 0x4 0x0
+#define IOMUXC_GPIO_DISP_B2_12_GPIO_MUX5_IO13			0x244 0x488 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_12_LPI2C4_SCL			0x244 0x488 0x5C4 0x6 0x1
+#define IOMUXC_GPIO_DISP_B2_12_ENET_QOS_COL			0x244 0x488 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B2_12_LPSPI4_SCK			0x244 0x488 0x610 0x9 0x1
+
+#define IOMUXC_GPIO_DISP_B2_13_GPIO11_IO14			0x248 0x48C 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B2_13_VIDEO_MUX_LCDIF_DATA21		0x248 0x48C 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_13_EMVSIM2_SVEN			0x248 0x48C 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B2_13_FLEXCAN1_RX			0x248 0x48C 0x498 0x2 0x1
+#define IOMUXC_GPIO_DISP_B2_13_LPUART2_RTS_B			0x248 0x48C 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_13_ENET_REF_CLK			0x248 0x48C 0x4A8 0x4 0x2
+#define IOMUXC_GPIO_DISP_B2_13_GPIO_MUX5_IO14			0x248 0x48C 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_13_LPI2C4_SDA			0x248 0x48C 0x5C8 0x6 0x1
+#define IOMUXC_GPIO_DISP_B2_13_ENET_QOS_1588_EVENT0_OUT		0x248 0x48C 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B2_13_LPSPI4_SIN			0x248 0x48C 0x614 0x9 0x1
+
+#define IOMUXC_GPIO_DISP_B2_14_GPIO_MUX5_IO15			0x24C 0x490 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_14_FLEXCAN1_TX			0x24C 0x490 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B2_14_ENET_QOS_1588_EVENT0_IN		0x24C 0x490 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B2_14_LPSPI4_SOUT			0x24C 0x490 0x618 0x9 0x1
+#define IOMUXC_GPIO_DISP_B2_14_GPIO11_IO15			0x24C 0x490 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B2_14_VIDEO_MUX_LCDIF_DATA22		0x24C 0x490 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_14_EMVSIM2_PD			0x24C 0x490 0x6AC 0x1 0x1
+#define IOMUXC_GPIO_DISP_B2_14_WDOG2_B				0x24C 0x490 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B2_14_VIDEO_MUX_EXT_DCIC1		0x24C 0x490 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_14_ENET_1G_REF_CLK			0x24C 0x490 0x4C4 0x4 0x3
+
+#define IOMUXC_GPIO_DISP_B2_15_VIDEO_MUX_LCDIF_DATA23		0x250 0x494 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_15_EMVSIM2_POWER_FAIL		0x250 0x494 0x6B0 0x1 0x1
+#define IOMUXC_GPIO_DISP_B2_15_WDOG1_B				0x250 0x494 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B2_15_VIDEO_MUX_EXT_DCIC2		0x250 0x494 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_15_PIT1_TRIGGER0			0x250 0x494 0x0 0x4 0x0
+#define IOMUXC_GPIO_DISP_B2_15_GPIO_MUX5_IO16			0x250 0x494 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_15_FLEXCAN1_RX			0x250 0x494 0x498 0x6 0x2
+#define IOMUXC_GPIO_DISP_B2_15_ENET_QOS_1588_EVENT0_AUX_IN	0x250 0x494 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B2_15_LPSPI4_PCS0			0x250 0x494 0x60C 0x9 0x1
+#define IOMUXC_GPIO_DISP_B2_15_GPIO11_IO16			0x250 0x494 0x0 0xA 0x0
+
+#endif  /* _DT_BINDINGS_PINCTRL_IMXRT1170_PINFUNC_H */
diff --git a/arch/arm/boot/dts/integratorap-im-pd1.dts b/arch/arm/boot/dts/integratorap-im-pd1.dts
index d47bfb66d069..cc514cf07bff 100644
--- a/arch/arm/boot/dts/integratorap-im-pd1.dts
+++ b/arch/arm/boot/dts/integratorap-im-pd1.dts
@@ -178,12 +178,12 @@
 		clock-names = "uartclk", "apb_pclk";
 	};
 
-	ssp@300000 {
+	spi@300000 {
 		compatible = "arm,pl022", "arm,primecell";
 		reg = <0x00300000 0x1000>;
 		interrupts-extended = <&impd1_vic 3>;
 		clocks = <&impd1_sspclk>, <&sysclk>;
-		clock-names = "spiclk", "apb_pclk";
+		clock-names = "sspclk", "apb_pclk";
 	};
 
 	impd1_gpio0: gpio@400000 {
@@ -249,6 +249,7 @@
 		/* 640x480 16bpp @ 25.175MHz is 36827428 bytes/s */
 		max-memory-bandwidth = <40000000>;
 		memory-region = <&impd1_ram>;
+		dma-ranges;
 
 		port@0 {
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts
index 9b652cc27b14..9148287fa0a9 100644
--- a/arch/arm/boot/dts/integratorap.dts
+++ b/arch/arm/boot/dts/integratorap.dts
@@ -160,6 +160,7 @@
 
 	pci: pciv3@62000000 {
 		compatible = "arm,integrator-ap-pci", "v3,v360epc-pci";
+		device_type = "pci";
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
@@ -261,7 +262,7 @@
 		lm0: bus@c0000000 {
 			compatible = "simple-bus";
 			ranges = <0x00000000 0xc0000000 0x10000000>;
-			dma-ranges = <0x00000000 0x80000000 0x10000000>;
+			dma-ranges = <0x00000000 0xc0000000 0x10000000>;
 			reg = <0xc0000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -269,7 +270,7 @@
 		lm1: bus@d0000000 {
 			compatible = "simple-bus";
 			ranges = <0x00000000 0xd0000000 0x10000000>;
-			dma-ranges = <0x00000000 0x80000000 0x10000000>;
+			dma-ranges = <0x00000000 0xd0000000 0x10000000>;
 			reg = <0xd0000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -277,7 +278,7 @@
 		lm2: bus@e0000000 {
 			compatible = "simple-bus";
 			ranges = <0x00000000 0xe0000000 0x10000000>;
-			dma-ranges = <0x00000000 0x80000000 0x10000000>;
+			dma-ranges = <0x00000000 0xe0000000 0x10000000>;
 			reg = <0xe0000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -285,7 +286,7 @@
 		lm3: bus@f0000000 {
 			compatible = "simple-bus";
 			ranges = <0x00000000 0xf0000000 0x10000000>;
-			dma-ranges = <0x00000000 0x80000000 0x10000000>;
+			dma-ranges = <0x00000000 0xf0000000 0x10000000>;
 			reg = <0xf0000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts b/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts
index a1c03c965f17..b7cbc90e1c18 100644
--- a/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts
+++ b/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: ISC
 /*
- * Device Tree file for Gateway 7001 AP
+ * Device Tree file for Gateway 7001 AP based on IXP422
  * Derived from boardfiles written by Imre Kaloz
  */
 
@@ -29,7 +29,6 @@
 	aliases {
 		/* second UART is the primary console */
 		serial0 = &uart1;
-		serial1 = &uart0;
 	};
 
 	soc {
diff --git a/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v2.dts b/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts
index a57009436ed8..df2ca6d95ee5 100644
--- a/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v2.dts
+++ b/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts
@@ -10,26 +10,26 @@
 #include <dt-bindings/input/input.h>
 
 / {
-	model = "Netgear WG302 v2";
-	compatible = "netgear,wg302v2", "intel,ixp42x";
+	model = "Netgear WG302 v1";
+	compatible = "netgear,wg302v1", "intel,ixp42x";
 	#address-cells = <1>;
 	#size-cells = <1>;
 
 	memory@0 {
-		/* 16 MB SDRAM according to OpenWrt database */
+		/* 32 MB SDRAM according to boot arguments */
 		device_type = "memory";
-		reg = <0x00000000 0x01000000>;
+		reg = <0x00000000 0x02000000>;
 	};
 
 	chosen {
-		bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootwait";
-		stdout-path = "uart1:115200n8";
+		/* The RedBoot comes up in 9600 baud so let's keep this */
+		bootargs = "console=ttyS0,9600n8";
+		stdout-path = "uart1:9600n8";
 	};
 
 	aliases {
 		/* These are switched around */
 		serial0 = &uart1;
-		serial1 = &uart0;
 	};
 
 	soc {
@@ -38,18 +38,17 @@
 				compatible = "intel,ixp4xx-flash", "cfi-flash";
 				bank-width = <2>;
 				/*
-				 * 32 MB of Flash in 128 0x20000 sized blocks
-				 * mapped in at CS0 and CS1
+				 * 8 MB of Flash in 64 0x20000 sized blocks
+				 * mapped in at CS0.
 				 */
-				reg = <0 0x00000000 0x2000000>;
+				reg = <0 0x00000000 0x800000>;
 
 				/* Configure expansion bus to allow writes */
 				intel,ixp4xx-eb-write-enable = <1>;
 
 				partitions {
 					compatible = "redboot-fis";
-					/* CHECKME: guess this is Redboot FIS */
-					fis-index-block = <0xff>;
+					fis-index-block = <0x3f>;
 				};
 			};
 		};
@@ -82,14 +81,14 @@
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 20>;
 			phy-mode = "rgmii";
-			phy-handle = <&phy8>;
+			phy-handle = <&phy30>;
 
 			mdio {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				phy8: ethernet-phy@8 {
-					reg = <8>;
+				phy30: ethernet-phy@30 {
+					reg = <30>;
 				};
 			};
 		};
diff --git a/arch/arm/boot/dts/intel-ixp42x.dtsi b/arch/arm/boot/dts/intel-ixp42x.dtsi
index d0e0f8afb7c9..84cee8ec3ab8 100644
--- a/arch/arm/boot/dts/intel-ixp42x.dtsi
+++ b/arch/arm/boot/dts/intel-ixp42x.dtsi
@@ -9,7 +9,7 @@
 	soc {
 		bus@c4000000 {
 			compatible = "intel,ixp42x-expansion-bus-controller", "syscon";
-			reg = <0xc4000000 0x28>;
+			reg = <0xc4000000 0x30>;
 		};
 
 		pci@c0000000 {
diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
index 849034a49a3f..03caea6fc6ff 100644
--- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi
+++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
@@ -181,7 +181,7 @@
 };
 
 &gpio2 {
-	touch-interrupt {
+	touch-interrupt-hog {
 		gpio-hog;
 		gpios = <12 GPIO_ACTIVE_LOW>;
 		input;
diff --git a/arch/arm/boot/dts/keystone-k2e-evm.dts b/arch/arm/boot/dts/keystone-k2e-evm.dts
index 66fec5f5d081..5d6d074011df 100644
--- a/arch/arm/boot/dts/keystone-k2e-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2e-evm.dts
@@ -137,10 +137,10 @@
 };
 
 &spi0 {
-	nor_flash: n25q128a11@0 {
+	nor_flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "Micron,n25q128a11";
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
 		spi-max-frequency = <54000000>;
 		m25p,fast-read;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi
index 71064483d34f..42cf74db673c 100644
--- a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi
+++ b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi
@@ -12,9 +12,9 @@ qmss: qmss@2a40000 {
 	#size-cells = <1>;
 	clocks = <&chipclk13>;
 	ranges;
-	queue-range	= <0 0x2000>;
-	linkram0	= <0x100000 0x4000>;
-	linkram1	= <0 0x10000>;
+	queue-range = <0 0x2000>;
+	linkram0 = <0x100000 0x4000>;
+	linkram1 = <0 0x10000>;
 
 	qmgrs {
 		#address-cells = <1>;
@@ -176,40 +176,40 @@ netcp: netcp@24000000 {
 			interfaces {
 				gbe0: interface-0 {
 					slave-port = <0>;
-					link-interface	= <1>;
-					phy-handle	= <&ethphy0>;
+					link-interface = <1>;
+					phy-handle = <&ethphy0>;
 				};
 				gbe1: interface-1 {
 					slave-port = <1>;
-					link-interface	= <1>;
-					phy-handle	= <&ethphy1>;
+					link-interface = <1>;
+					phy-handle = <&ethphy1>;
 				};
 			};
 
 			secondary-slave-ports {
 				port-2 {
 					slave-port = <2>;
-					link-interface	= <2>;
+					link-interface = <2>;
 				};
 				port-3 {
 					slave-port = <3>;
-					link-interface	= <2>;
+					link-interface = <2>;
 				};
 				port-4 {
 					slave-port = <4>;
-					link-interface	= <2>;
+					link-interface = <2>;
 				};
 				port-5 {
 					slave-port = <5>;
-					link-interface	= <2>;
+					link-interface = <2>;
 				};
 				port-6 {
 					slave-port = <6>;
-					link-interface	= <2>;
+					link-interface = <2>;
 				};
 				port-7 {
 					slave-port = <7>;
-					link-interface	= <2>;
+					link-interface = <2>;
 				};
 			};
 		};
diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi
index b8f152e7af7f..65c32946c522 100644
--- a/arch/arm/boot/dts/keystone-k2e.dtsi
+++ b/arch/arm/boot/dts/keystone-k2e.dtsi
@@ -141,7 +141,7 @@
 			clock-names = "pcie";
 			#address-cells = <3>;
 			#size-cells = <2>;
-			reg =  <0x21021000 0x2000>, <0x21020000 0x1000>, <0x02620128 4>;
+			reg = <0x21021000 0x2000>, <0x21020000 0x1000>, <0x02620128 4>;
 			ranges = <0x82000000 0 0x60000000 0x60000000
 				  0 0x10000000>;
 
@@ -185,14 +185,14 @@
 		};
 
 		mdio: mdio@24200f00 {
-			compatible	= "ti,keystone_mdio", "ti,davinci_mdio";
+			compatible = "ti,keystone_mdio", "ti,davinci_mdio";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x24200f00 0x100>;
 			status = "disabled";
 			clocks = <&clkcpgmac>;
 			clock-names = "fck";
-			bus_freq	= <2500000>;
+			bus_freq = <2500000>;
 		};
 		/include/ "keystone-k2e-netcp.dtsi"
 };
diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts
index d800f26b6275..88be868cf71e 100644
--- a/arch/arm/boot/dts/keystone-k2g-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2g-evm.dts
@@ -392,7 +392,7 @@
 	pinctrl-0 = <&qspi_pins>;
 	cdns,rclk-en;
 
-	flash0: m25p80@0 {
+	flash0: flash@0 {
 		compatible = "s25fl512s", "jedec,spi-nor";
 		reg = <0>;
 		spi-tx-bus-width = <1>;
diff --git a/arch/arm/boot/dts/keystone-k2g-ice.dts b/arch/arm/boot/dts/keystone-k2g-ice.dts
index 2a2d38cf0fff..bd84d7f0f2fe 100644
--- a/arch/arm/boot/dts/keystone-k2g-ice.dts
+++ b/arch/arm/boot/dts/keystone-k2g-ice.dts
@@ -325,7 +325,7 @@
 	cdns,rclk-en;
 	status = "okay";
 
-	flash0: m25p80@0 {
+	flash0: flash@0 {
 		compatible = "s25fl256s1", "jedec,spi-nor";
 		reg = <0>;
 		spi-tx-bus-width = <1>;
diff --git a/arch/arm/boot/dts/keystone-k2g-netcp.dtsi b/arch/arm/boot/dts/keystone-k2g-netcp.dtsi
index d0e6a9a43402..f6306933ff42 100644
--- a/arch/arm/boot/dts/keystone-k2g-netcp.dtsi
+++ b/arch/arm/boot/dts/keystone-k2g-netcp.dtsi
@@ -125,7 +125,7 @@ netcp: netcp@4000000 {
 			interfaces {
 				gbe0: interface-0 {
 					slave-port = <0>;
-					link-interface	= <5>;
+					link-interface = <5>;
 				};
 			};
 		};
diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
index 37198294f4b2..380dd9d637ee 100644
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi
@@ -262,7 +262,7 @@
 			 */
 			ti,system-reboot-controller;
 			mbox-names = "rx", "tx";
-			mboxes= <&msgmgr 5 2>,
+			mboxes = <&msgmgr 5 2>,
 				<&msgmgr 0 0>;
 			reg-names = "debug_messages";
 			reg = <0x02921c00 0x400>;
@@ -326,13 +326,13 @@
 
 		dss: dss@02540000 {
 			compatible = "ti,k2g-dss";
-			reg =	<0x02540000 0x400>,
+			reg = <0x02540000 0x400>,
 				<0x02550000 0x1000>,
 				<0x02557000 0x1000>,
 				<0x0255a800 0x100>,
 				<0x0255ac00 0x100>;
 			reg-names = "cfg", "common", "vid1", "ovr1", "vp1";
-			clocks =	<&k2g_clks 0x2 0>,
+			clocks = <&k2g_clks 0x2 0>,
 					<&k2g_clks 0x2 1>;
 			clock-names = "fck", "vp1";
 			interrupts = <GIC_SPI 247 IRQ_TYPE_EDGE_RISING>;
@@ -348,7 +348,7 @@
 
 		edma0: edma@2700000 {
 			compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc";
-			reg =	<0x02700000 0x8000>;
+			reg = <0x02700000 0x8000>;
 			reg-names = "edma3_cc";
 			interrupts = <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>,
 					<GIC_SPI 216 IRQ_TYPE_EDGE_RISING>,
@@ -367,19 +367,19 @@
 
 		edma0_tptc0: tptc@2760000 {
 			compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
-			reg =	<0x02760000 0x400>;
+			reg = <0x02760000 0x400>;
 			power-domains = <&k2g_pds 0x3f>;
 		};
 
 		edma0_tptc1: tptc@2768000 {
 			compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
-			reg =	<0x02768000 0x400>;
+			reg = <0x02768000 0x400>;
 			power-domains = <&k2g_pds 0x3f>;
 		};
 
 		edma1: edma@2728000 {
 			compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc";
-			reg =	<0x02728000 0x8000>;
+			reg = <0x02728000 0x8000>;
 			reg-names = "edma3_cc";
 			interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
 					<GIC_SPI 219 IRQ_TYPE_EDGE_RISING>,
@@ -402,13 +402,13 @@
 
 		edma1_tptc0: tptc@27b0000 {
 			compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
-			reg =	<0x027b0000 0x400>;
+			reg = <0x027b0000 0x400>;
 			power-domains = <&k2g_pds 0x4f>;
 		};
 
 		edma1_tptc1: tptc@27b8000 {
 			compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
-			reg =	<0x027b8000 0x400>;
+			reg = <0x027b8000 0x400>;
 			power-domains = <&k2g_pds 0x4f>;
 		};
 
diff --git a/arch/arm/boot/dts/keystone-k2hk-evm.dts b/arch/arm/boot/dts/keystone-k2hk-evm.dts
index ad4e22afe133..4a91f5ded402 100644
--- a/arch/arm/boot/dts/keystone-k2hk-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2hk-evm.dts
@@ -161,10 +161,10 @@
 };
 
 &spi0 {
-	nor_flash: n25q128a11@0 {
+	nor_flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "Micron,n25q128a11";
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
 		spi-max-frequency = <54000000>;
 		m25p,fast-read;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi
index 022d93c366c7..8a421c65f920 100644
--- a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi
+++ b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi
@@ -12,9 +12,9 @@ qmss: qmss@2a40000 {
 	#size-cells = <1>;
 	clocks = <&chipclk13>;
 	ranges;
-	queue-range	= <0 0x4000>;
-	linkram0	= <0x100000 0x8000>;
-	linkram1	= <0x0 0x10000>;
+	queue-range = <0 0x4000>;
+	linkram0 = <0x100000 0x8000>;
+	linkram1 = <0x0 0x10000>;
 
 	qmgrs {
 		#address-cells = <1>;
@@ -150,7 +150,7 @@ netcp: netcp@2000000 {
 	#size-cells = <1>;
 
 	/* NetCP address range */
-	ranges  = <0 0x2000000 0x100000>;
+	ranges = <0 0x2000000 0x100000>;
 
 	clocks = <&clkpa>, <&clkcpgmac>;
 	clock-names = "pa_clk", "ethss_clk";
@@ -207,11 +207,11 @@ netcp: netcp@2000000 {
 			secondary-slave-ports {
 				port-2 {
 					slave-port = <2>;
-					link-interface	= <2>;
+					link-interface = <2>;
 				};
 				port-3 {
 					slave-port = <3>;
-					link-interface	= <2>;
+					link-interface = <2>;
 				};
 			};
 		};
diff --git a/arch/arm/boot/dts/keystone-k2hk.dtsi b/arch/arm/boot/dts/keystone-k2hk.dtsi
index 8a9447703310..da6d3934c2e8 100644
--- a/arch/arm/boot/dts/keystone-k2hk.dtsi
+++ b/arch/arm/boot/dts/keystone-k2hk.dtsi
@@ -282,14 +282,14 @@
 		};
 
 		mdio: mdio@2090300 {
-			compatible	= "ti,keystone_mdio", "ti,davinci_mdio";
+			compatible = "ti,keystone_mdio", "ti,davinci_mdio";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x02090300 0x100>;
 			status = "disabled";
 			clocks = <&clkcpgmac>;
 			clock-names = "fck";
-			bus_freq	= <2500000>;
+			bus_freq = <2500000>;
 		};
 		/include/ "keystone-k2hk-netcp.dtsi"
 };
diff --git a/arch/arm/boot/dts/keystone-k2l-evm.dts b/arch/arm/boot/dts/keystone-k2l-evm.dts
index e200533d26a4..1c880cf8fa91 100644
--- a/arch/arm/boot/dts/keystone-k2l-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2l-evm.dts
@@ -110,10 +110,10 @@
 };
 
 &spi0 {
-	nor_flash: n25q128a11@0 {
+	nor_flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "Micron,n25q128a11";
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
 		spi-max-frequency = <54000000>;
 		m25p,fast-read;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi
index e96ca664abc2..5ec6680a533d 100644
--- a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi
+++ b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi
@@ -12,9 +12,9 @@ qmss: qmss@2a40000 {
 	#size-cells = <1>;
 	clocks = <&chipclk13>;
 	ranges;
-	queue-range	= <0 0x2000>;
-	linkram0	= <0x100000 0x4000>;
-	linkram1	= <0x70000000 0x10000>; /* 1MB OSR mem */
+	queue-range = <0 0x2000>;
+	linkram0 = <0x100000 0x4000>;
+	linkram1 = <0x70000000 0x10000>; /* 1MB OSR mem */
 
 	qmgrs {
 		#address-cells = <1>;
@@ -174,24 +174,24 @@ netcp: netcp@26000000 {
 			interfaces {
 				gbe0: interface-0 {
 					slave-port = <0>;
-					link-interface	= <1>;
-					phy-handle	= <&ethphy0>;
+					link-interface = <1>;
+					phy-handle = <&ethphy0>;
 				};
 				gbe1: interface-1 {
 					slave-port = <1>;
-					link-interface	= <1>;
-					phy-handle	= <&ethphy1>;
+					link-interface = <1>;
+					phy-handle = <&ethphy1>;
 				};
 			};
 
 			secondary-slave-ports {
 				port-2 {
 					slave-port = <2>;
-					link-interface	= <2>;
+					link-interface = <2>;
 				};
 				port-3 {
 					slave-port = <3>;
-					link-interface	= <2>;
+					link-interface = <2>;
 				};
 			};
 		};
diff --git a/arch/arm/boot/dts/keystone-k2l.dtsi b/arch/arm/boot/dts/keystone-k2l.dtsi
index dff5fea72b2f..421a02bbc9d3 100644
--- a/arch/arm/boot/dts/keystone-k2l.dtsi
+++ b/arch/arm/boot/dts/keystone-k2l.dtsi
@@ -47,7 +47,7 @@
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			reg = <0x02348400 0x100>;
-			clocks	= <&clkuart2>;
+			clocks = <&clkuart2>;
 			interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>;
 		};
 
@@ -57,7 +57,7 @@
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			reg = <0x02348800 0x100>;
-			clocks	= <&clkuart3>;
+			clocks = <&clkuart3>;
 			interrupts = <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>;
 		};
 
@@ -388,14 +388,14 @@
 		};
 
 		mdio: mdio@26200f00 {
-			compatible	= "ti,keystone_mdio", "ti,davinci_mdio";
+			compatible = "ti,keystone_mdio", "ti,davinci_mdio";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x26200f00 0x100>;
 			status = "disabled";
 			clocks = <&clkcpgmac>;
 			clock-names = "fck";
-			bus_freq	= <2500000>;
+			bus_freq = <2500000>;
 		};
 		/include/ "keystone-k2l-netcp.dtsi"
 };
diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index fc9fdc857ae8..50789f9e2215 100644
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -14,7 +14,7 @@
 	interrupt-parent = <&gic>;
 
 	aliases {
-		serial0	= &uart0;
+		serial0 = &uart0;
 		spi0 = &spi0;
 		spi1 = &spi1;
 		spi2 = &spi2;
@@ -61,11 +61,11 @@
 	};
 
 	psci {
-		compatible	= "arm,psci";
-		method		= "smc";
-		cpu_suspend	= <0x84000001>;
-		cpu_off		= <0x84000002>;
-		cpu_on		= <0x84000003>;
+		compatible = "arm,psci";
+		method = "smc";
+		cpu_suspend = <0x84000001>;
+		cpu_off = <0x84000002>;
+		cpu_on = <0x84000003>;
 	};
 
 	soc0: soc@0 {
@@ -119,7 +119,7 @@
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			reg = <0x02530c00 0x100>;
-			clocks	= <&clkuart0>;
+			clocks = <&clkuart0>;
 			interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>;
 		};
 
@@ -129,7 +129,7 @@
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			reg = <0x02531000 0x100>;
-			clocks	= <&clkuart1>;
+			clocks = <&clkuart1>;
 			interrupts = <GIC_SPI 280 IRQ_TYPE_EDGE_RISING>;
 		};
 
@@ -301,7 +301,7 @@
 			clock-names = "pcie";
 			#address-cells = <3>;
 			#size-cells = <2>;
-			reg =  <0x21801000 0x2000>, <0x21800000 0x1000>, <0x02620128 4>;
+			reg = <0x21801000 0x2000>, <0x21800000 0x1000>, <0x02620128 4>;
 			ranges = <0x82000000 0 0x50000000 0x50000000
 				  0 0x10000000>;
 
diff --git a/arch/arm/boot/dts/kirkwood-6192.dtsi b/arch/arm/boot/dts/kirkwood-6192.dtsi
index 396bcba08adb..705c0d7effed 100644
--- a/arch/arm/boot/dts/kirkwood-6192.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6192.dtsi
@@ -26,12 +26,22 @@
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 9>;
+				interrupt-names = "intx", "error";
+				interrupts = <9>, <44>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie_intc 0>,
+						<0 0 0 2 &pcie_intc 1>,
+						<0 0 0 3 &pcie_intc 2>,
+						<0 0 0 4 &pcie_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gate_clk 2>;
 				status = "disabled";
+
+				pcie_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi
index faa05849a40d..8e311165fd13 100644
--- a/arch/arm/boot/dts/kirkwood-6281.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6281.dtsi
@@ -26,12 +26,22 @@
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 9>;
+				interrupt-names = "intx", "error";
+				interrupts = <9>, <44>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie_intc 0>,
+						<0 0 0 2 &pcie_intc 1>,
+						<0 0 0 3 &pcie_intc 2>,
+						<0 0 0 4 &pcie_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gate_clk 2>;
 				status = "disabled";
+
+				pcie_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi
index e84c54b77dea..e33723160ce7 100644
--- a/arch/arm/boot/dts/kirkwood-6282.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6282.dtsi
@@ -30,12 +30,22 @@
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 9>;
+				interrupt-names = "intx", "error";
+				interrupts = <9>, <44>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+						<0 0 0 2 &pcie0_intc 1>,
+						<0 0 0 3 &pcie0_intc 2>,
+						<0 0 0 4 &pcie0_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gate_clk 2>;
 				status = "disabled";
+
+				pcie0_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie1: pcie@2,0 {
@@ -48,12 +58,22 @@
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 10>;
+				interrupt-names = "intx", "error";
+				interrupts = <10>, <45>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gate_clk 18>;
 				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi
index 299c147298c3..c3469a2fc58a 100644
--- a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi
+++ b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi
@@ -26,12 +26,22 @@
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 9>;
+				interrupt-names = "intx", "error";
+				interrupts = <9>, <44>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie_intc 0>,
+						<0 0 0 2 &pcie_intc 1>,
+						<0 0 0 3 &pcie_intc 2>,
+						<0 0 0 4 &pcie_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gate_clk 2>;
 				status = "disabled";
+
+				pcie_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/kirkwood-c200-v1.dts b/arch/arm/boot/dts/kirkwood-c200-v1.dts
new file mode 100644
index 000000000000..f59ff7578dfc
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-c200-v1.dts
@@ -0,0 +1,310 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Ctera C200 V1 Board Description
+ * Copyright 2021-2022 Pawel Dembicki <paweldembicki@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Ctera C200 V1";
+	compatible = "ctera,c200-v1", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_buttons>;
+		pinctrl-names = "default";
+
+		power {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+		};
+
+		reset {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+		};
+
+		usb1 {
+			label = "USB1 Button";
+			linux,code = <BTN_0>;
+			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+		};
+
+		usb2 {
+			label = "USB2 Button";
+			linux,code = <BTN_1>;
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_leds>;
+		pinctrl-names = "default";
+
+		led-0 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+		};
+
+		led-3 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+		};
+
+		led-4 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		};
+
+		led-6 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		};
+
+		led-7 {
+			function = LED_FUNCTION_DISK_ERR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led-8 {
+			function = LED_FUNCTION_DISK_ERR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+
+		led-9 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+		};
+
+		led-10 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "usbport";
+			trigger-sources = <&hub_port2>;
+		};
+
+		led-11 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+
+		led-12 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "usbport";
+			trigger-sources = <&hub_port1>;
+		};
+	};
+};
+
+&eth0 {
+	status = "okay";
+};
+
+&eth0port {
+	phy-handle = <&ethphy9>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	rtc@30 {
+		compatible = "s35390a";
+		reg = <0x30>;
+	};
+
+	lm63@4c {
+		compatible = "national,lm63";
+		reg = <0x4c>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy9: ethernet-phy@9 {
+		reg = <9>;
+	};
+};
+
+&nand {
+	status = "okay";
+	chip-delay = <40>;
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0000000 0x200000>;
+	};
+
+	partition@200000 {
+		label = "certificate";
+		reg = <0x0200000 0x100000>;
+	};
+
+	partition@300000 {
+		label = "preset_cfg";
+		reg = <0x0300000 0x100000>;
+	};
+
+	partition@400000 {
+		label = "dev_params";
+		reg = <0x0400000 0x100000>;
+	};
+
+	partition@500000 {
+		label = "active_bank";
+		reg = <0x0500000 0x0100000>;
+	};
+
+	partition@600000 {
+		label = "magic";
+		reg = <0x0600000 0x0100000>;
+	};
+
+	partition@700000 {
+		label = "bank1";
+		reg = <0x0700000 0x2800000>;
+	};
+
+	partition@2f00000 {
+		label = "bank2";
+		reg = <0x2f00000 0x2800000>;
+	};
+
+	/* 0x5700000-0x5a00000 undefined in vendor firmware */
+
+	partition@5a00000 {
+		label = "reserved";
+		reg = <0x5a00000 0x2000000>;
+	};
+
+	partition@7a00000 {
+		label = "rootfs";
+		reg = <0x7a00000 0x8600000>;
+	};
+};
+
+&pinctrl {
+	/* Buzzer gpios are connected to two pins of buzzer.
+	 * This buzzer require a modulated signal from gpio.
+	 * Leave it as is due lack of proper driver.
+	 */
+	pmx_buzzer: pmx-buzzer {
+		marvell,pins = "mpp12", "mpp13";
+		marvell,function = "gpio";
+	};
+
+	pmx_leds: pmx-leds {
+		marvell,pins = "mpp14", "mpp15", "mpp16", "mpp17", "mpp38",
+			       "mpp39", "mpp40", "mpp42", "mpp43", "mpp44",
+			       "mpp45", "mpp46", "mpp47";
+		marvell,function = "gpio";
+	};
+
+	pmx_buttons: pmx-buttons {
+		marvell,pins = "mpp28", "mpp29", "mpp48", "mpp49";
+		marvell,function = "gpio";
+	};
+
+	pmx_poweroff: pmx-poweroff {
+		marvell,pins = "mpp34";
+		marvell,function = "gpio";
+	};
+};
+
+&rtc {
+	status = "disabled";
+};
+
+&sata {
+	status = "okay";
+	nr-ports = <2>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	port@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <1>;
+		#trigger-source-cells = <0>;
+
+		hub_port1: port@1 {
+			reg = <1>;
+			#trigger-source-cells = <0>;
+		};
+
+		hub_port2: port@2 {
+			reg = <2>;
+			#trigger-source-cells = <0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/kirkwood-dir665.dts
index b3ad3f607d31..c32300611d2c 100644
--- a/arch/arm/boot/dts/kirkwood-dir665.dts
+++ b/arch/arm/boot/dts/kirkwood-dir665.dts
@@ -78,7 +78,7 @@
 
 		spi@10600 {
 			status = "okay";
-			m25p80@0 {
+			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "mxicy,mx25l12805d", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
index 7b151acb9984..88b70ba1c8fe 100644
--- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi
+++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
@@ -10,6 +10,11 @@
 
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
+			/* Non-default UART pins */
+			pmx_uart0: pmx-uart0 {
+				marvell,pins = "mpp4", "mpp5";
+			};
+
 			pmx_power_hdd: pmx-power-hdd {
 				marvell,pins = "mpp10";
 				marvell,function = "gpo";
@@ -213,22 +218,11 @@
 &mdio {
 	status = "okay";
 
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
 	ethphy1: ethernet-phy@8 {
 		reg = <8>;
 	};
 };
 
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
 &eth1 {
 	status = "okay";
 	ethernet1-port@0 {
diff --git a/arch/arm/boot/dts/kirkwood-synology.dtsi b/arch/arm/boot/dts/kirkwood-synology.dtsi
index 217bd374e52b..8f6c387d3a8b 100644
--- a/arch/arm/boot/dts/kirkwood-synology.dtsi
+++ b/arch/arm/boot/dts/kirkwood-synology.dtsi
@@ -198,7 +198,7 @@
 		spi@10600 {
 			status = "okay";
 
-			m25p80@0 {
+			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "st,m25p80", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts
new file mode 100644
index 000000000000..0f555eb45bda
--- /dev/null
+++ b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for the Kontron KSwitch D10 MMT 6G-2GS
+ */
+
+/dts-v1/;
+#include "lan966x-kontron-kswitch-d10-mmt.dtsi"
+
+/ {
+	model = "Kontron KSwitch D10 MMT 6G-2GS";
+	compatible = "kontron,kswitch-d10-mmt-6g-2gs", "kontron,s1921",
+		     "microchip,lan9668", "microchip,lan966";
+
+	aliases {
+		i2c0 = &i2c4;
+		i2c1 = &i2c1;
+	};
+
+	sfp0: sfp0 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c4>;
+		los-gpios = <&sgpio_in 1 0 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in 1 1 GPIO_ACTIVE_LOW>;
+		maximum-power-milliwatt = <2500>;
+		tx-disable-gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in 0 2 GPIO_ACTIVE_HIGH>;
+		rate-select0-gpios = <&sgpio_out 2 0 GPIO_ACTIVE_HIGH>;
+		rate-select1-gpios = <&sgpio_out 2 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp1: sfp1 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c1>;
+		los-gpios = <&sgpio_in 1 2 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in 1 3 GPIO_ACTIVE_LOW>;
+		maximum-power-milliwatt = <2500>;
+		tx-disable-gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in 0 3 GPIO_ACTIVE_HIGH>;
+		rate-select0-gpios = <&sgpio_out 2 2 GPIO_ACTIVE_HIGH>;
+		rate-select1-gpios = <&sgpio_out 2 3 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&flx1 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c1: i2c@600 {
+		pinctrl-0 = <&fc1_c_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+};
+
+&flx4 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c4: i2c@600 {
+		pinctrl-0 = <&fc4_b_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+};
+
+&gpio {
+	fc1_c_pins: fc1-c-i2c-pins {
+		/* SCL, SDA */
+		pins = "GPIO_47", "GPIO_48";
+		function = "fc1_c";
+	};
+
+	fc4_b_pins: fc4-b-i2c-pins {
+		/* SCL, SDA */
+		pins = "GPIO_57", "GPIO_58";
+		function = "fc4_b";
+	};
+};
+
+&port2 {
+	phys = <&serdes 2 SERDES6G(0)>;
+	sfp = <&sfp0>;
+	managed = "in-band-status";
+	phy-mode = "sgmii";
+	status = "okay";
+};
+
+&port3 {
+	phys = <&serdes 3 SERDES6G(1)>;
+	sfp = <&sfp1>;
+	managed = "in-band-status";
+	phy-mode = "sgmii";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts
new file mode 100644
index 000000000000..5feef9a59a79
--- /dev/null
+++ b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for the Kontron KSwitch D10 MMT 8G
+ */
+
+/dts-v1/;
+#include "lan966x-kontron-kswitch-d10-mmt.dtsi"
+
+/ {
+	model = "Kontron KSwitch D10 MMT 8G";
+	compatible = "kontron,kswitch-d10-mmt-8g", "kontron,s1921",
+		     "microchip,lan9668", "microchip,lan966";
+};
+
+&mdio0 {
+	phy2: ethernet-phy@3 {
+		reg = <3>;
+	};
+
+	phy3: ethernet-phy@4 {
+		reg = <4>;
+	};
+};
+
+&port2 {
+	phys = <&serdes 2 SERDES6G(0)>;
+	phy-handle = <&phy2>;
+	phy-mode = "sgmii";
+	managed = "in-band-status";
+	status = "okay";
+};
+
+&port3 {
+	phys = <&serdes 3 SERDES6G(1)>;
+	phy-handle = <&phy3>;
+	phy-mode = "sgmii";
+	managed = "in-band-status";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
new file mode 100644
index 000000000000..0097e72e3fb2
--- /dev/null
+++ b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Common part of the device tree for the Kontron KSwitch D10 MMT
+ */
+
+/dts-v1/;
+#include "lan966x.dtsi"
+#include "dt-bindings/phy/phy-lan966x-serdes.h"
+
+/ {
+	aliases {
+		serial0 = &usart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+};
+
+&flx0 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	usart0: serial@200 {
+		pinctrl-0 = <&usart0_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+};
+
+&flx3 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+	status = "okay";
+
+	spi3: spi@400 {
+		pinctrl-0 = <&fc3_b_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+		cs-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&gpio {
+	fc3_b_pins: fc3-b-pins {
+		/* SCK, MISO, MOSI */
+		pins = "GPIO_51", "GPIO_52", "GPIO_53";
+		function = "fc3_b";
+	};
+
+	miim_c_pins: miim-c-pins {
+		/* MDC, MDIO */
+		pins = "GPIO_59", "GPIO_60";
+		function = "miim_c";
+	};
+
+	sgpio_a_pins: sgpio-a-pins {
+		/* SCK, D0, D1 */
+		pins = "GPIO_32", "GPIO_33", "GPIO_34";
+		function = "sgpio_a";
+	};
+
+	sgpio_b_pins: sgpio-b-pins {
+		/* LD */
+		pins = "GPIO_64";
+		function = "sgpio_b";
+	};
+
+	usart0_pins: usart0-pins {
+		/* RXD, TXD */
+		pins = "GPIO_25", "GPIO_26";
+		function = "fc0_b";
+	};
+
+	usbs_a_pins: usbs-a-pins {
+		/* VBUS_DET */
+		pins = "GPIO_66";
+		function = "gpio";
+	};
+};
+
+&mdio0 {
+	pinctrl-0 = <&miim_c_pins>;
+	pinctrl-names = "default";
+	reset-gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+	clock-frequency = <2500000>;
+	status = "okay";
+
+	phy4: ethernet-phy@5 {
+		reg = <5>;
+		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
+	};
+
+	phy5: ethernet-phy@6 {
+		reg = <6>;
+		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
+	};
+
+	phy6: ethernet-phy@7 {
+		reg = <7>;
+		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
+	};
+
+	phy7: ethernet-phy@8 {
+		reg = <8>;
+		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
+	};
+};
+
+&mdio1 {
+	status = "okay";
+};
+
+&phy0 {
+	status = "okay";
+};
+
+&phy1 {
+	status = "okay";
+};
+
+&port0 {
+	phys = <&serdes 0 CU(0)>;
+	phy-handle = <&phy0>;
+	phy-mode = "gmii";
+	status = "okay";
+};
+
+&port1 {
+	phys = <&serdes 1 CU(1)>;
+	phy-handle = <&phy1>;
+	phy-mode = "gmii";
+	status = "okay";
+};
+
+&port4 {
+	phys = <&serdes 4 SERDES6G(2)>;
+	phy-handle = <&phy4>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&port5 {
+	phys = <&serdes 5 SERDES6G(2)>;
+	phy-handle = <&phy5>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&port6 {
+	phys = <&serdes 6 SERDES6G(2)>;
+	phy-handle = <&phy6>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&port7 {
+	phys = <&serdes 7 SERDES6G(2)>;
+	phy-handle = <&phy7>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&serdes {
+	status = "okay";
+};
+
+&sgpio {
+	pinctrl-0 = <&sgpio_a_pins>, <&sgpio_b_pins>;
+	pinctrl-names = "default";
+	bus-frequency = <8000000>;
+	/* arbitrary range because all GPIOs are in software mode */
+	microchip,sgpio-port-ranges = <0 11>;
+	status = "okay";
+
+	sgpio_in: gpio@0 {
+		ngpios = <128>;
+	};
+
+	sgpio_out: gpio@1 {
+		ngpios = <128>;
+	};
+};
+
+&switch {
+	status = "okay";
+};
+
+&udc {
+	pinctrl-0 = <&usbs_a_pins>;
+	pinctrl-names = "default";
+	atmel,vbus-gpio = <&gpio 66 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/lan966x-pcb8290.dts b/arch/arm/boot/dts/lan966x-pcb8290.dts
new file mode 100644
index 000000000000..77187f59f04d
--- /dev/null
+++ b/arch/arm/boot/dts/lan966x-pcb8290.dts
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * lan966x-pcb8290.dts - Device Tree file for LAN966X-PCB8290 board
+ *
+ * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Horatiu Vultur <horatiu.vultur@microchip.com>
+ */
+/dts-v1/;
+#include "lan966x.dtsi"
+#include "dt-bindings/phy/phy-lan966x-serdes.h"
+
+/ {
+	model = "Microchip EVB LAN9668";
+	compatible = "microchip,lan9668-pcb8290", "microchip,lan9668", "microchip,lan966";
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+};
+
+&aes {
+	status = "disabled"; /* Reserved by secure OS */
+};
+
+&gpio {
+	miim_a_pins: mdio-pins {
+		/* MDC, MDIO */
+		pins =  "GPIO_28", "GPIO_29";
+		function = "miim_a";
+	};
+
+	pps_out_pins: pps-out-pins {
+		/* 1pps output */
+		pins = "GPIO_38";
+		function = "ptpsync_3";
+	};
+
+	ptp_ext_pins: ptp-ext-pins {
+		/* 1pps input */
+		pins = "GPIO_35";
+		function = "ptpsync_0";
+	};
+
+	udc_pins: ucd-pins {
+		/* VBUS_DET B */
+		pins = "GPIO_8";
+		function = "usb_slave_b";
+	};
+};
+
+&mdio0 {
+	pinctrl-0 = <&miim_a_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ext_phy0: ethernet-phy@7 {
+		reg = <7>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy1: ethernet-phy@8 {
+		reg = <8>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy2: ethernet-phy@9 {
+		reg = <9>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy3: ethernet-phy@10 {
+		reg = <10>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy4: ethernet-phy@15 {
+		reg = <15>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy5: ethernet-phy@16 {
+		reg = <16>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy6: ethernet-phy@17 {
+		reg = <17>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy7: ethernet-phy@18 {
+		reg = <18>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+};
+
+&port0 {
+	reg = <2>;
+	phy-handle = <&ext_phy2>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 0 SERDES6G(1)>;
+	status = "okay";
+};
+
+&port1 {
+	reg = <3>;
+	phy-handle = <&ext_phy3>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 1 SERDES6G(1)>;
+	status = "okay";
+};
+
+&port2 {
+	reg = <0>;
+	phy-handle = <&ext_phy0>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 2 SERDES6G(1)>;
+	status = "okay";
+};
+
+&port3 {
+	reg = <1>;
+	phy-handle = <&ext_phy1>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 3 SERDES6G(1)>;
+	status = "okay";
+};
+
+&port4 {
+	reg = <6>;
+	phy-handle = <&ext_phy6>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 4 SERDES6G(2)>;
+	status = "okay";
+};
+
+&port5 {
+	reg = <7>;
+	phy-handle = <&ext_phy7>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 5 SERDES6G(2)>;
+	status = "okay";
+};
+
+&port6 {
+	reg = <4>;
+	phy-handle = <&ext_phy4>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 6 SERDES6G(2)>;
+	status = "okay";
+};
+
+&port7 {
+	reg = <5>;
+	phy-handle = <&ext_phy5>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 7 SERDES6G(2)>;
+	status = "okay";
+};
+
+&serdes {
+	status = "okay";
+};
+
+&switch {
+	pinctrl-0 = <&pps_out_pins>, <&ptp_ext_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&udc {
+	pinctrl-0 = <&udc_pins>;
+	pinctrl-names = "default";
+	atmel,vbus-gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/lan966x-pcb8291.dts b/arch/arm/boot/dts/lan966x-pcb8291.dts
new file mode 100644
index 000000000000..3a3d76af8612
--- /dev/null
+++ b/arch/arm/boot/dts/lan966x-pcb8291.dts
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * lan966x_pcb8291.dts - Device Tree file for PCB8291
+ */
+/dts-v1/;
+#include "lan966x.dtsi"
+#include "dt-bindings/phy/phy-lan966x-serdes.h"
+
+/ {
+	model = "Microchip EVB - LAN9662";
+	compatible = "microchip,lan9662-pcb8291", "microchip,lan9662", "microchip,lan966";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &usart3;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-s0-blue {
+			label = "s0:blue";
+			gpios = <&sgpio_out 2 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s0-green {
+			label = "s0:green";
+			gpios = <&sgpio_out 2 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s1-blue {
+			label = "s1:blue";
+			gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s1-green {
+			label = "s1:green";
+			gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&aes {
+	status = "disabled"; /* Reserved by secure OS */
+};
+
+&gpio {
+	fc3_b_pins: fc3-b-pins {
+		/* RX, TX */
+		pins = "GPIO_52", "GPIO_53";
+		function = "fc3_b";
+	};
+
+	can0_b_pins:  can0-b-pins {
+		/* RX, TX */
+		pins = "GPIO_35", "GPIO_36";
+		function = "can0_b";
+	};
+
+	sgpio_a_pins: sgpio-a-pins {
+		/* SCK, D0, D1, LD */
+		pins = "GPIO_32", "GPIO_33", "GPIO_34", "GPIO_35";
+		function = "sgpio_a";
+	};
+};
+
+&can0 {
+	pinctrl-0 = <&can0_b_pins>;
+	pinctrl-names = "default";
+	status = "disabled"; /* Conflict with switch */
+};
+
+&flx3 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	usart3: serial@200 {
+		pinctrl-0 = <&fc3_b_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+};
+
+&mdio1 {
+	status = "okay";
+};
+
+&phy0 {
+	status = "okay";
+};
+
+&phy1 {
+	status = "okay";
+};
+
+&port0 {
+	phy-handle = <&phy0>;
+	phy-mode = "gmii";
+	phys = <&serdes 0 CU(0)>;
+	status = "okay";
+};
+
+&port1 {
+	phy-handle = <&phy1>;
+	phy-mode = "gmii";
+	phys = <&serdes 1 CU(1)>;
+	status = "okay";
+};
+
+&serdes {
+	status = "okay";
+};
+
+&sgpio {
+	pinctrl-0 = <&sgpio_a_pins>;
+	pinctrl-names = "default";
+	microchip,sgpio-port-ranges = <0 3>, <8 11>;
+	status = "okay";
+
+	gpio@0 {
+		ngpios = <64>;
+	};
+	gpio@1 {
+		ngpios = <64>;
+	};
+};
+
+&switch {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/lan966x-pcb8309.dts b/arch/arm/boot/dts/lan966x-pcb8309.dts
new file mode 100644
index 000000000000..c436cd20d4b4
--- /dev/null
+++ b/arch/arm/boot/dts/lan966x-pcb8309.dts
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * lan966x_pcb8309.dts - Device Tree file for PCB8309
+ */
+/dts-v1/;
+#include "lan966x.dtsi"
+#include "dt-bindings/phy/phy-lan966x-serdes.h"
+
+/ {
+	model = "Microchip EVB - LAN9662";
+	compatible = "microchip,lan9662-pcb8309", "microchip,lan9662", "microchip,lan966";
+
+	aliases {
+		serial0 = &usart3;
+		i2c102 = &i2c102;
+		i2c103 = &i2c103;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+
+	i2c-mux {
+		compatible = "i2c-mux";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mux-controls = <&mux>;
+		i2c-parent = <&i2c4>;
+
+		i2c102: i2c-sfp@1 {
+			reg = <1>;
+		};
+
+		i2c103: i2c-sfp@2 {
+			reg = <2>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-s0-green {
+			label = "s0:green";
+			gpios = <&sgpio_out 2 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s0-red {
+			label = "s0:red";
+			gpios = <&sgpio_out 2 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s1-green {
+			label = "s1:green";
+			gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s1-red {
+			label = "s1:red";
+			gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	mux: mux-controller {
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+
+		mux-gpios = <&sgpio_out 11 0 GPIO_ACTIVE_HIGH>, /* p11b0 */
+			    <&sgpio_out 11 1 GPIO_ACTIVE_HIGH>; /* p11b1 */
+	};
+
+	sfp2: sfp2 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c102>;
+		tx-disable-gpios = <&sgpio_out 10 0 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in  2 0 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in  2 1 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in  1 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp3: sfp3 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c103>;
+		tx-disable-gpios = <&sgpio_out 10 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in  3 0 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in  3 1 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in  1 1 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&aes {
+	status = "disabled"; /* Reserved by secure OS */
+};
+
+&flx3 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	usart3: serial@200 {
+		pinctrl-0 = <&fc3_b_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+};
+
+&flx4 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c4: i2c@600 {
+		compatible = "microchip,sam9x60-i2c";
+		reg = <0x600 0x200>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&nic_clk>;
+		pinctrl-0 = <&fc4_b_pins>;
+		pinctrl-names = "default";
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		i2c-sda-hold-time-ns = <1500>;
+		status = "okay";
+	};
+};
+
+&gpio {
+	fc3_b_pins: fc3-b-pins {
+		/* RXD, TXD */
+		pins = "GPIO_52", "GPIO_53";
+		function = "fc3_b";
+	};
+
+	fc4_b_pins: fc4-b-pins {
+		/* SCL, SDA */
+		pins = "GPIO_57", "GPIO_58";
+		function = "fc4_b";
+	};
+
+	sgpio_a_pins: sgpio-a-pins {
+		/* SCK, D0, D1, LD */
+		pins = "GPIO_32", "GPIO_33", "GPIO_34", "GPIO_35";
+		function = "sgpio_a";
+	};
+};
+
+&mdio1 {
+	status = "okay";
+};
+
+&phy0 {
+	status = "okay";
+};
+
+&phy1 {
+	status = "okay";
+};
+
+&port0 {
+	phy-handle = <&phy0>;
+	phy-mode = "gmii";
+	phys = <&serdes 0 CU(0)>;
+	status = "okay";
+};
+
+&port1 {
+	phy-handle = <&phy1>;
+	phy-mode = "gmii";
+	phys = <&serdes 1 CU(1)>;
+	status = "okay";
+};
+
+&port2 {
+	sfp = <&sfp2>;
+	managed = "in-band-status";
+	phy-mode = "sgmii";
+	phys = <&serdes 2 SERDES6G(0)>;
+	status = "okay";
+};
+
+&port3 {
+	sfp = <&sfp3>;
+	managed = "in-band-status";
+	phy-mode = "sgmii";
+	phys = <&serdes 3 SERDES6G(1)>;
+	status = "okay";
+};
+
+&serdes {
+	status = "okay";
+};
+
+&sgpio {
+	pinctrl-0 = <&sgpio_a_pins>;
+	pinctrl-names = "default";
+	microchip,sgpio-port-ranges = <0 3>, <8 11>;
+	status = "okay";
+
+	gpio@0 {
+		ngpios = <64>;
+	};
+	gpio@1 {
+		ngpios = <64>;
+	};
+};
+
+&switch {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/lan966x.dtsi b/arch/arm/boot/dts/lan966x.dtsi
new file mode 100644
index 000000000000..0bf818713422
--- /dev/null
+++ b/arch/arm/boot/dts/lan966x.dtsi
@@ -0,0 +1,610 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * lan966x.dtsi - Device Tree Include file for Microchip LAN966 family SoC
+ *
+ * Copyright (C) 2021 Microchip Technology, Inc. and its subsidiaries
+ *
+ * Author: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/microchip,lan966x.h>
+
+/ {
+	model = "Microchip LAN966 family SoC";
+	compatible = "microchip,lan966";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			clock-frequency = <600000000>;
+			reg = <0x0>;
+		};
+	};
+
+	clocks {
+		sys_clk: sys_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <165625000>;
+		};
+
+		cpu_clk: cpu_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <600000000>;
+		};
+
+		ddr_clk: ddr_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <300000000>;
+		};
+
+		nic_clk: nic_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	clks: clock-controller@e00c00a8 {
+		compatible = "microchip,lan966x-gck";
+		#clock-cells = <1>;
+		clocks = <&cpu_clk>, <&ddr_clk>, <&sys_clk>;
+		clock-names = "cpu", "ddr", "sys";
+		reg = <0xe00c00a8 0x38>, <0xe00c02cc 0x4>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <37500000>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		udc: usb@200000 {
+			compatible = "microchip,lan9662-udc",
+				     "atmel,sama5d3-udc";
+			reg = <0x00200000 0x80000>,
+			      <0xe0808000 0x400>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks GCK_GATE_UDPHS>, <&nic_clk>;
+			clock-names = "pclk", "hclk";
+			status = "disabled";
+		};
+
+		switch: switch@e0000000 {
+			compatible = "microchip,lan966x-switch";
+			reg = <0xe0000000 0x0100000>,
+			      <0xe2000000 0x0800000>;
+			reg-names = "cpu", "gcb";
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "xtr", "fdma", "ana", "ptp",
+					  "ptp-ext";
+			resets = <&reset 0>;
+			reset-names = "switch";
+			status = "disabled";
+
+			ethernet-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port0: port@0 {
+					reg = <0>;
+					status = "disabled";
+				};
+
+				port1: port@1 {
+					reg = <1>;
+					status = "disabled";
+				};
+
+				port2: port@2 {
+					reg = <2>;
+					status = "disabled";
+				};
+
+				port3: port@3 {
+					reg = <3>;
+					status = "disabled";
+				};
+
+				port4: port@4 {
+					reg = <4>;
+					status = "disabled";
+				};
+
+				port5: port@5 {
+					reg = <5>;
+					status = "disabled";
+				};
+
+				port6: port@6 {
+					reg = <6>;
+					status = "disabled";
+				};
+
+				port7: port@7 {
+					reg = <7>;
+					status = "disabled";
+				};
+			};
+		};
+
+		flx0: flexcom@e0040000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe0040000 0x100>;
+			clocks = <&clks GCK_ID_FLEXCOM0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe0040000 0x800>;
+			status = "disabled";
+
+			usart0: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(3)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(2)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "usart";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
+			spi0: spi@400 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(3)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(2)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "spi_clk";
+				atmel,fifo-size = <32>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@600 {
+				compatible = "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(3)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(2)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		flx1: flexcom@e0044000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe0044000 0x100>;
+			clocks = <&clks GCK_ID_FLEXCOM1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe0044000 0x800>;
+			status = "disabled";
+
+			usart1: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(5)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(4)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "usart";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
+			spi1: spi@400 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(5)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(4)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "spi_clk";
+				atmel,fifo-size = <32>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@600 {
+				compatible = "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(5)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(4)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		trng: rng@e0048000 {
+			compatible = "atmel,at91sam9g45-trng";
+			reg = <0xe0048000 0x100>;
+			clocks = <&nic_clk>;
+		};
+
+		aes: crypto@e004c000 {
+			compatible = "atmel,at91sam9g46-aes";
+			reg = <0xe004c000 0x100>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(12)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(13)>;
+			dma-names = "tx", "rx";
+			clocks = <&nic_clk>;
+			clock-names = "aes_clk";
+		};
+
+		flx2: flexcom@e0060000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe0060000 0x100>;
+			clocks = <&clks GCK_ID_FLEXCOM2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe0060000 0x800>;
+			status = "disabled";
+
+			usart2: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(6)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "usart";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
+			spi2: spi@400 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(6)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "spi_clk";
+				atmel,fifo-size = <32>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@600 {
+				compatible = "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(6)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		flx3: flexcom@e0064000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe0064000 0x100>;
+			clocks = <&clks GCK_ID_FLEXCOM3>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe0064000 0x800>;
+			status = "disabled";
+
+			usart3: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(8)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "usart";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
+			spi3: spi@400 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(8)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "spi_clk";
+				atmel,fifo-size = <32>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@600 {
+				compatible = "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(8)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		dma0: dma-controller@e0068000 {
+			compatible = "microchip,sama7g5-dma";
+			reg = <0xe0068000 0x1000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&nic_clk>;
+			clock-names = "dma_clk";
+		};
+
+		sha: crypto@e006c000 {
+			compatible = "atmel,at91sam9g46-sha";
+			reg = <0xe006c000 0xec>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(14)>;
+			dma-names = "tx";
+			clocks = <&nic_clk>;
+			clock-names = "sha_clk";
+		};
+
+		flx4: flexcom@e0070000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe0070000 0x100>;
+			clocks = <&clks GCK_ID_FLEXCOM4>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe0070000 0x800>;
+			status = "disabled";
+
+			usart4: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(11)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(10)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "usart";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
+			spi4: spi@400 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(11)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(10)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "spi_clk";
+				atmel,fifo-size = <32>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@600 {
+				compatible = "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(11)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(10)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		timer0: timer@e008c000 {
+			compatible = "snps,dw-apb-timer";
+			reg = <0xe008c000 0x400>;
+			clocks = <&nic_clk>;
+			clock-names = "timer";
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		watchdog: watchdog@e0090000 {
+			compatible = "snps,dw-wdt";
+			reg = <0xe0090000 0x1000>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&nic_clk>;
+			status = "disabled";
+		};
+
+		cpu_ctrl: syscon@e00c0000 {
+			compatible = "microchip,lan966x-cpu-syscon", "syscon";
+			reg = <0xe00c0000 0x350>;
+		};
+
+		can0: can@e081c000 {
+			compatible = "bosch,m_can";
+			reg = <0xe081c000 0xfc>, <0x00100000 0x4000>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&clks GCK_ID_MCAN0>, <&clks GCK_ID_MCAN0>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&clks GCK_ID_MCAN0>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can1: can@e0820000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0820000 0xfc>, <0x00100000 0x8000>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&clks GCK_ID_MCAN1>, <&clks GCK_ID_MCAN1>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&clks GCK_ID_MCAN1>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x4000 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		reset: reset-controller@e200400c {
+			compatible = "microchip,lan966x-switch-reset";
+			reg = <0xe200400c 0x4>;
+			reg-names = "gcb";
+			#reset-cells = <1>;
+			cpu-syscon = <&cpu_ctrl>;
+		};
+
+		gpio: pinctrl@e2004064 {
+			compatible = "microchip,lan966x-pinctrl";
+			reg = <0xe2004064 0xb4>,
+			    <0xe2010024 0x138>;
+			resets = <&reset 0>;
+			reset-names = "switch";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&gpio 0 0 78>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+		};
+
+		mdio0: mdio@e2004118 {
+			compatible = "microchip,lan966x-miim";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xe2004118 0x24>;
+			clocks = <&sys_clk>;
+			status = "disabled";
+		};
+
+		mdio1: mdio@e200413c {
+			compatible = "microchip,lan966x-miim";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xe200413c 0x24>,
+			      <0xe2010020 0x4>;
+			clocks = <&sys_clk>;
+			status = "disabled";
+
+			phy0: ethernet-phy@1 {
+				reg = <1>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			phy1: ethernet-phy@2 {
+				reg = <2>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		sgpio: gpio@e2004190 {
+			compatible = "microchip,sparx5-sgpio";
+			reg = <0xe2004190 0x118>;
+			clocks = <&sys_clk>;
+			resets = <&reset 0>;
+			reset-names = "switch";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sgpio_in: gpio@0 {
+				compatible = "microchip,sparx5-sgpio-bank";
+				reg = <0>;
+				gpio-controller;
+				#gpio-cells = <3>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+			};
+
+			sgpio_out: gpio@1 {
+				compatible = "microchip,sparx5-sgpio-bank";
+				reg = <1>;
+				gpio-controller;
+				#gpio-cells = <3>;
+			};
+		};
+
+		hwmon: hwmon@e2010180 {
+			compatible = "microchip,lan9668-hwmon";
+			reg = <0xe2010180 0xc>,
+			      <0xe20042a8 0xc>;
+			reg-names = "pvt", "fan";
+			clocks = <&sys_clk>;
+		};
+
+		serdes: serdes@e202c000 {
+			compatible = "microchip,lan966x-serdes";
+			reg = <0xe202c000 0x9c>,
+			      <0xe2004010 0x4>;
+			#phy-cells = <2>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@e8c11000 {
+			compatible = "arm,gic-400", "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			reg = <0xe8c11000 0x1000>,
+			      <0xe8c12000 0x2000>,
+			      <0xe8c14000 0x2000>,
+			      <0xe8c16000 0x2000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
index 2a0a98fe67f0..3240c67e0c39 100644
--- a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
+++ b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
@@ -11,3 +11,18 @@
 	model = "LogicPD Zoom OMAP35xx SOM-LV Development Kit";
 	compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3430", "ti,omap3";
 };
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_2_pins>;
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)            /* etk_d10.hsusb2_clk */
+			OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)            /* etk_d11.hsusb2_stp */
+			OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d12.hsusb2_dir */
+			OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d13.hsusb2_nxt */
+			OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d14.hsusb2_data0 */
+			OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d15.hsusb2_data1 */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
index a604d92221a4..c757f0d7781c 100644
--- a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
+++ b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
@@ -11,3 +11,18 @@
 	model = "LogicPD Zoom DM3730 SOM-LV Development Kit";
 	compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3";
 };
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_2_pins>;
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)            /* etk_d10.hsusb2_clk */
+			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)            /* etk_d11.hsusb2_stp */
+			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d12.hsusb2_dir */
+			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d13.hsusb2_nxt */
+			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d14.hsusb2_data0 */
+			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d15.hsusb2_data1 */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi
index b56524cc7fe2..9ba0ea4eb48a 100644
--- a/arch/arm/boot/dts/logicpd-som-lv.dtsi
+++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi
@@ -27,6 +27,8 @@
 
 	/* HS USB Host PHY on PORT 1 */
 	hsusb2_phy: hsusb2_phy {
+		pinctrl-names = "default";
+		pinctrl-0 = <&hsusb2_reset_pin>;
 		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; /* gpio_4 */
 		#phy-cells = <0>;
@@ -144,6 +146,8 @@
 };
 
 &usbhshost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_pins>;
 	port2-mode = "ehci-phy";
 };
 
@@ -151,10 +155,7 @@
 	phys = <0 &hsusb2_phy>;
 };
 
-
 &omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb2_pins>;
 
 	mmc3_pins: pinmux_mm3_pins {
 		pinctrl-single,pins = <
@@ -250,8 +251,7 @@
 };
 
 &omap3_pmx_wkup {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb2_reset_pin>;
+
 	hsusb2_reset_pin: pinmux_hsusb1_reset_pin {
 		pinctrl-single,pins = <
 			OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4)	/* sys_boot2.gpio_4 */
@@ -265,21 +265,6 @@
 	};
 };
 
-&omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb2_2_pins>;
-	hsusb2_2_pins: pinmux_hsusb2_2_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)            /* etk_d10.hsusb2_clk */
-			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)            /* etk_d11.hsusb2_stp */
-			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d12.hsusb2_dir */
-			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d13.hsusb2_nxt */
-			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d14.hsusb2_data0 */
-			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d15.hsusb2_data1 */
-		>;
-	};
-};
-
 &uart2 {
 	interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts
index 57bae2aa910e..cb08aa62d967 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts
+++ b/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts
@@ -11,3 +11,11 @@
 	model = "LogicPD Zoom OMAP35xx Torpedo Development Kit";
 	compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3430", "ti,omap3";
 };
+
+&omap3_pmx_core {
+	isp1763_pins: pinmux_isp1763_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2154,  PIN_INPUT_PULLUP | MUX_MODE4)	/* sdmmc1_dat6.gpio_128 */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
index 5532db04046c..07ea822fe405 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
+++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
@@ -85,3 +85,12 @@
 		>;
 	};
 };
+
+/* The gpio muxing between omap3530 and dm3730 is different for GPIO_128 */
+&omap3_pmx_wkup {
+	isp1763_pins: pinmux_isp1763_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a58, PIN_INPUT_PULLUP | MUX_MODE4)	/* reserved.gpio_128 */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
index 533a47bc4a53..d3da8b1b473b 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
+++ b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
@@ -93,7 +93,8 @@
 
 &gpmc {
 	ranges = <0 0 0x30000000 0x1000000	/* CS0: 16MB for NAND */
-		  1 0 0x2c000000 0x1000000>;	/* CS1: 16MB for LAN9221 */
+		  1 0 0x2c000000 0x1000000	/* CS1: 16MB for LAN9221 */
+		  6 0 0x28000000 0x1000000>;	/* CS6: 16MB for ISP1763 */
 
 	ethernet@gpmc {
 		pinctrl-names = "default";
@@ -102,6 +103,44 @@
 		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;		/* gpio129 */
 		reg = <1 0 0xff>;
 	};
+
+	usb@6,0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&isp1763_pins>;
+		compatible = "nxp,usb-isp1763";
+		reg = <0x6 0x0 0xff>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "host";
+		bus-width = <16>;
+		dr_mode = "host";
+		gpmc,mux-add-data = <0>;
+		gpmc,device-width = <2>;
+		gpmc,wait-pin = <0>;
+		gpmc,burst-length = <4>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-diffcsen;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <45>;
+		gpmc,cs-wr-off-ns = <45>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <0>;
+		gpmc,adv-wr-off-ns = <0>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <45>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <25>;
+		gpmc,rd-cycle-ns = <60>;
+		gpmc,wr-cycle-ns = <45>;
+		gpmc,access-ns = <35>;
+		gpmc,page-burst-access-ns = <0>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <60>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-data-mux-bus-ns = <5>;
+		gpmc,wr-access-ns = <20>;
+	};
 };
 
 &hdqw1w {
diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi
index 10b8249b8ab6..1bb686a7b3ec 100644
--- a/arch/arm/boot/dts/lpc18xx.dtsi
+++ b/arch/arm/boot/dts/lpc18xx.dtsi
@@ -121,7 +121,7 @@
 			status = "disabled";
 		};
 
-		usb0: ehci@40006100 {
+		usb0: usb@40006100 {
 			compatible = "nxp,lpc1850-ehci", "generic-ehci";
 			reg = <0x40006100 0x100>;
 			interrupts = <8>;
@@ -133,7 +133,7 @@
 			status = "disabled";
 		};
 
-		usb1: ehci@40007100 {
+		usb1: usb@40007100 {
 			compatible = "nxp,lpc1850-ehci", "generic-ehci";
 			reg = <0x40007100 0x100>;
 			interrupts = <9>;
@@ -183,7 +183,7 @@
 			compatible = "nxp,lpc1850-dwmac", "snps,dwmac-3.611", "snps,dwmac";
 			reg = <0x40010000 0x2000>;
 			interrupts = <5>;
-			interrupt-names	= "macirq";
+			interrupt-names = "macirq";
 			clocks = <&ccu1 CLK_CPU_ETHERNET>;
 			clock-names = "stmmaceth";
 			resets = <&rgu 22>;
diff --git a/arch/arm/boot/dts/ls1021a-iot.dts b/arch/arm/boot/dts/ls1021a-iot.dts
new file mode 100644
index 000000000000..ce8e26d7791f
--- /dev/null
+++ b/arch/arm/boot/dts/ls1021a-iot.dts
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2021-2022 NXP
+ *
+ */
+
+/dts-v1/;
+#include "ls1021a.dtsi"
+
+/ {
+	model = "LS1021A-IOT Board";
+	compatible = "fsl,ls1021a-iot", "fsl,ls1021a";
+
+	sys_mclk: clock-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	reg_3p3v: regulator-3V3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_2p5v: regulator-2V5 {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker Ext",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"Microphone Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"Speaker Ext", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+			frame-master;
+			bitclock-master;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			frame-master;
+			bitclock-master;
+		};
+	};
+};
+
+&can0{
+	status = "disabled";
+};
+
+&can1{
+	status = "disabled";
+};
+
+&can2{
+	status = "disabled";
+};
+
+&can3{
+	status = "okay";
+};
+
+&dcu {
+	display = <&display>;
+	status = "okay";
+
+	display: display@0 {
+		bits-per-pixel = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+
+			timing0: mode0 {
+				clock-frequency = <25000000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <80>;
+				hfront-porch = <80>;
+				vback-porch = <16>;
+				vfront-porch = <16>;
+				hsync-len = <12>;
+				vsync-len = <2>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+		};
+	};
+};
+
+&enet0 {
+	tbi-handle = <&tbi1>;
+	phy-handle = <&phy1>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&enet1 {
+	tbi-handle = <&tbi1>;
+	phy-handle = <&phy3>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&enet2 {
+	fixed-link = <0 1 1000 0 0>;
+	phy-connection-type = "rgmii-id";
+	status = "okay";
+};
+
+&esdhc{
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	pca9555: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sgtl5000: audio-codec@2a {
+		#sound-dai-cells = <0x0>;
+		compatible = "fsl,sgtl5000";
+		reg = <0x2a>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_2p5v>;
+		clocks = <&sys_mclk>;
+	};
+
+	max1239: adc@35 {
+		compatible = "maxim,max1239";
+		reg = <0x35>;
+		#io-channel-cells = <1>;
+	};
+
+	ina2201: core-monitor@44 {
+		compatible = "ti,ina220";
+		reg = <0x44>;
+		shunt-resistor = <1000>;
+	};
+
+	ina2202: current-monitor@45 {
+		compatible = "ti,ina220";
+		reg = <0x45>;
+		shunt-resistor = <1000>;
+	};
+
+	lm75b: thermal-monitor@48 {
+		compatible = "national,lm75b";
+		reg = <0x48>;
+	};
+};
+
+&lpuart0 {
+	status = "okay";
+};
+
+&mdio0 {
+	phy0: ethernet-phy@0 {
+		reg = <0x0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <0x1>;
+	};
+
+	phy2: ethernet-phy@2 {
+		reg = <0x2>;
+	};
+
+	phy3: ethernet-phy@3 {
+		reg = <0x3>;
+	};
+
+	tbi1: tbi-phy@1f {
+		reg = <0x1f>;
+		device_type = "tbi-phy";
+	};
+};
+
+&qspi {
+	num-cs = <2>;
+	status = "okay";
+
+	s25fl128s: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&sai2 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 2e69d6eab4d1..7c5510e34494 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -122,13 +122,20 @@
 			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		ifc: ifc@1530000 {
-			compatible = "fsl,ifc", "simple-bus";
+		ifc: memory-controller@1530000 {
+			compatible = "fsl,ifc";
 			reg = <0x0 0x1530000 0x0 0x10000>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
 
+		sfp: efuse@1e80000 {
+			compatible = "fsl,ls1021a-sfp";
+			reg = <0x0 0x1e80000 0x0 0x10000>;
+			clocks = <&clockgen 4 3>;
+			clock-names = "sfp";
+		};
+
 		dcfg: dcfg@1ee0000 {
 			compatible = "fsl,ls1021a-dcfg", "syscon";
 			reg = <0x0 0x1ee0000 0x0 0x1000>;
@@ -192,7 +199,7 @@
 					<3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
 					<4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
 					<5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-map-mask = <0xffffffff 0x0>;
+				interrupt-map-mask = <0x7 0x0>;
 			};
 		};
 
@@ -640,7 +647,7 @@
 			status = "disabled";
 		};
 
-		edma0: edma@2c00000 {
+		edma0: dma-controller@2c00000 {
 			#dma-cells = <2>;
 			compatible = "fsl,vf610-edma";
 			reg = <0x0 0x2c00000 0x0 0x10000>,
diff --git a/arch/arm/boot/dts/mba6ulx.dtsi b/arch/arm/boot/dts/mba6ulx.dtsi
new file mode 100644
index 000000000000..aac42df9ecf6
--- /dev/null
+++ b/arch/arm/boot/dts/mba6ulx.dtsi
@@ -0,0 +1,569 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/ {
+	model = "TQ-Systems MBA6ULx Baseboard";
+
+	aliases {
+		mmc0 = &usdhc2;
+		mmc1 = &usdhc1;
+		rtc0 = &rtc0;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&reg_mba6ul_3v3>;
+		enable-gpios = <&expander_out0 4 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	beeper: beeper {
+		compatible = "gpio-beeper";
+		gpios = <&expander_out1 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio_buttons: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_buttons>;
+
+		button1 {
+			label = "s14";
+			linux,code = <KEY_1>;
+			gpios = <&expander_in0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		button2 {
+			label = "s6";
+			linux,code = <KEY_2>;
+			gpios = <&expander_in0 1 GPIO_ACTIVE_LOW>;
+		};
+
+		button3 {
+			label = "s7";
+			linux,code = <KEY_3>;
+			gpios = <&expander_in0 2 GPIO_ACTIVE_LOW>;
+		};
+
+		power-button {
+			label = "POWER";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+			gpio-key,wakeup;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		status = "okay";
+
+		led1 {
+			label = "led1";
+			gpios = <&expander_out1 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led2 {
+			label = "led2";
+			gpios = <&expander_out1 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_lcd_pwr: regulator-lcd-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-pwr";
+		gpio = <&expander_out0 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		status = "disabled";
+	};
+
+	reg_mba6ul_3v3: regulator-mba6ul-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "supply-mba6ul-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_mba6ul_5v0: regulator-mba6ul-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "supply-mba6ul-5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_mpcie: regulator-mpcie-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "mpcie-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&expander_out0 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		startup-delay-us = <500000>;
+		vin-supply = <&reg_mba6ul_3v3>;
+	};
+
+	reg_otg2vbus_5v0: regulator-otg2-vbus-5v0 {
+		compatible = "regulator-fixed";
+		gpio = <&expander_out1 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-name = "otg2-vbus-supply-5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_mpcie>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x6000000>;
+			linux,cma-default;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-tlv320aic32x4";
+		model = "imx-audio-tlv320aic32x4";
+		ssi-controller = <&sai1>;
+		audio-codec = <&tlv320aic32x4>;
+		audio-asrc = <&asrc>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_mba6ul_3v3>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_mba6ul_3v3>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <768000000>;
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	num-cs = <1>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	phy-supply = <&reg_mba6ul_3v3>;
+	phy-reset-gpios = <&expander_out1 1 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <25>;
+	phy-reset-post-delay = <1>;
+	status = "okay";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>, <&pinctrl_enet2_mdc>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	phy-supply = <&reg_mba6ul_3v3>;
+	phy-reset-gpios = <&expander_out1 2 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <25>;
+	phy-reset-post-delay = <1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			reg = <0>;
+			max-speed = <100>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			clocks = <&clks IMX6UL_CLK_ENET2_REF_125M>;
+			reg = <1>;
+			max-speed = <100>;
+		};
+	};
+};
+
+&i2c4 {
+	tlv320aic32x4: audio-codec@18 {
+		compatible = "ti,tlv320aic32x4";
+		reg = <0x18>;
+		clocks = <&clks IMX6UL_CLK_SAI1>;
+		clock-names = "mclk";
+		ldoin-supply = <&reg_mba6ul_3v3>;
+		iov-supply = <&reg_mba6ul_3v3>;
+	};
+
+	jc42: temperature-sensor@19 {
+		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+		reg = <0x19>;
+	};
+
+	expander_out0: gpio-expander@20 {
+		compatible = "nxp,pca9554";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	expander_in0: gpio-expander@21 {
+		compatible = "nxp,pca9554";
+		reg = <0x21>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_expander_in0>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		enet1_int-hog {
+			gpio-hog;
+			gpios = <6 0>;
+			input;
+		};
+
+		enet2_int-hog {
+			gpio-hog;
+			gpios = <7 0>;
+			input;
+		};
+	};
+
+	expander_out1: gpio-expander@22 {
+		compatible = "nxp,pca9554";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	analog_touch: touchscreen@41 {
+		compatible = "st,stmpe811";
+		reg = <0x41>;
+		interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-parent = <&gpio4>;
+		interrupt-controller;
+		status = "disabled";
+
+		stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			st,adc-freq = <1>;      /* 3.25 MHz ADC clock speed */
+			st,ave-ctrl = <3>;      /* 8 sample average control */
+			st,fraction-z = <7>;    /* 7 length fractional part in z */
+			/*
+			 * 50 mA typical 80 mA max touchscreen drivers
+			 * current limit value
+			 */
+			st,i-drive = <1>;
+			st,mod-12b = <1>;       /* 12-bit ADC */
+			st,ref-sel = <0>;       /* internal ADC reference */
+			st,sample-time = <4>;   /* ADC converstion time: 80 clocks */
+			st,settling = <3>;      /* 1 ms panel driver settling time */
+			st,touch-det-delay = <5>; /* 5 ms touch detect interrupt delay */
+		};
+	};
+
+	/* NXP SE97BTP with temperature sensor + eeprom */
+	se97b: eeprom@51 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	assigned-clocks = <&clks IMX6UL_CLK_SAI1_SEL>,
+			  <&clks IMX6UL_CLK_SAI1>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <0>, <24000000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	/* for DTE mode, add below change */
+	/* fsl,dte-mode; */
+	/* pinctrl-0 = <&pinctrl_uart6dte>; */
+	uart-has-rtscts;
+	linux,rs485-enabled-at-boot-time;
+	rs485-rts-active-low;
+	rs485-rx-during-tx;
+	status = "okay";
+};
+
+/* otg-port */
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1>;
+	power-active-high;
+	over-current-active-low;
+	/* we implement only dual role but not a fully featured OTG */
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+/* 7-port usb hub */
+/* id, pwr, oc pins not connected */
+&usbotg2 {
+	disable-over-current;
+	vbus-supply = <&reg_otg2vbus_5v0>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_mba6ul_3v3>;
+	vqmmc-supply = <&reg_vccsd>;
+	no-1-8-v;
+	no-mmc;
+	no-sdio;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog1>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_buttons: buttonsgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0x100b0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK	0x1b020
+			MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO	0x1b020
+			MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI	0x1b020
+			MX6UL_PAD_UART4_RX_DATA__ECSPI2_SS0	0x1b020
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b0a8
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0a0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0a0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b0a8
+		>;
+	};
+
+	pinctrl_enet2_mdc: enet2mdcgrp {
+		fsl,pins = <
+			/* mdio */
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+		>;
+	};
+
+	pinctrl_expander_in0: expanderin0grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA02__GPIO4_IO23	0x1b0b1
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
+			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			/* 100 k PD, DSE 120 OHM, SPPEED LO */
+			MX6UL_PAD_GPIO1_IO09__PWM2_OUT		0x00003050
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK	0x1b0b1
+			MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC	0x1b0b1
+			MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA	0x1f0b8
+			MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA	0x110b0
+			MX6UL_PAD_CSI_DATA01__SAI1_MCLK		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_MCLK__UART6_DCE_TX	0x1b0b1
+			MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX	0x1b0b1
+			MX6UL_PAD_CSI_VSYNC__UART6_DCE_RTS	0x1b0b1
+			MX6UL_PAD_CSI_HSYNC__UART6_DCE_CTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart6dte: uart6dte {
+		fsl,pins = <
+			MX6UL_PAD_CSI_PIXCLK__UART6_DTE_TX	0x1b0b1
+			MX6UL_PAD_CSI_MCLK__UART6_DTE_RX	0x1b0b1
+			MX6UL_PAD_CSI_HSYNC__UART6_DTE_RTS	0x1b0b1
+			MX6UL_PAD_CSI_VSYNC__UART6_DTE_CTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_usb_otg1: usbotg1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x00017059
+			MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC	0x0001b0b0
+			MX6UL_PAD_GPIO1_IO04__USB_OTG1_PWR	0x0001b099
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x00017069
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x00017059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x00017059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x00017059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x00017059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x00017059
+			/* WP */
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x0001b099
+			/* CD */
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x0001b099
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x00017069
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x000170b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x000170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x000170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x000170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x000170b9
+			/* WP */
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x0001b099
+			/* CD */
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x0001b099
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x00017069
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x000170f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x000170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x000170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x000170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x000170f9
+			/* WP */
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x0001b099
+			/* CD */
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x0001b099
+		>;
+	};
+
+	pinctrl_wdog1: wdog1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO08__WDOG1_WDOG_B	0x0001b099
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
index 3be7cba603d5..8e3860d5d916 100644
--- a/arch/arm/boot/dts/meson.dtsi
+++ b/arch/arm/boot/dts/meson.dtsi
@@ -59,7 +59,7 @@
 			};
 
 			uart_A: serial@84c0 {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x84c0 0x18>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
 				fifo-size = <128>;
@@ -67,7 +67,7 @@
 			};
 
 			uart_B: serial@84dc {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x84dc 0x18>;
 				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
@@ -105,7 +105,7 @@
 			};
 
 			uart_C: serial@8700 {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x8700 0x18>;
 				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
@@ -214,21 +214,21 @@
 			ranges = <0x0 0xc8100000 0x100000>;
 
 			ao_arc_rproc: remoteproc@1c {
-				compatible= "amlogic,meson-mx-ao-arc";
+				compatible = "amlogic,meson-mx-ao-arc";
 				reg = <0x1c 0x8>, <0x38 0x8>;
 				reg-names = "remap", "cpu";
 				status = "disabled";
 			};
 
 			ir_receiver: ir-receiver@480 {
-				compatible= "amlogic,meson6-ir";
+				compatible = "amlogic,meson6-ir";
 				reg = <0x480 0x20>;
 				interrupts = <GIC_SPI 15 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};
 
 			uart_AO: serial@4c0 {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart";
 				reg = <0x4c0 0x18>;
 				interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
diff --git a/arch/arm/boot/dts/meson8-minix-neo-x8.dts b/arch/arm/boot/dts/meson8-minix-neo-x8.dts
index 61ec929ab86e..56ea875c418c 100644
--- a/arch/arm/boot/dts/meson8-minix-neo-x8.dts
+++ b/arch/arm/boot/dts/meson8-minix-neo-x8.dts
@@ -65,7 +65,7 @@
 	pinctrl-0 = <&spi_nor_pins>;
 	pinctrl-names = "default";
 
-	spi-flash@0 {
+	flash@0 {
 		compatible = "mxicy,mx25l1606e";
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index f80ddc98d3a2..0f8bac8bac8b 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -430,7 +430,7 @@
 };
 
 &ao_arc_rproc {
-	compatible= "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc";
+	compatible = "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc";
 	amlogic,secbus2 = <&secbus2>;
 	sram = <&ao_arc_sram>;
 	resets = <&reset RESET_MEDIA_CPU>;
@@ -736,27 +736,27 @@
 };
 
 &uart_AO {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_CLK81>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart", "amlogic,meson-ao-uart";
+	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_A {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART0>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_B {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART1>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_C {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART2>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &usb0 {
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index b49b7cbaed4e..cf9c04a61ba3 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -384,7 +384,7 @@
 };
 
 &ao_arc_rproc {
-	compatible= "amlogic,meson8b-ao-arc", "amlogic,meson-mx-ao-arc";
+	compatible = "amlogic,meson8b-ao-arc", "amlogic,meson-mx-ao-arc";
 	amlogic,secbus2 = <&secbus2>;
 	sram = <&ao_arc_sram>;
 	resets = <&reset RESET_MEDIA_CPU>;
@@ -724,27 +724,27 @@
 };
 
 &uart_AO {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_CLK81>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart", "amlogic,meson-ao-uart";
+	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_A {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART0>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_B {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART1>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_C {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART2>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &usb0 {
diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi
index 46984d4c5224..987d792f67ea 100644
--- a/arch/arm/boot/dts/mmp2.dtsi
+++ b/arch/arm/boot/dts/mmp2.dtsi
@@ -275,7 +275,9 @@
 				compatible = "marvell,pdma-1.0";
 				reg = <0xd4000000 0x10000>;
 				interrupts = <48>;
+				/* For backwards compatibility: */
 				#dma-channels = <16>;
+				dma-channels = <16>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/moxart-uc7112lx.dts b/arch/arm/boot/dts/moxart-uc7112lx.dts
index eb5291b0ee3a..e07b807b4cec 100644
--- a/arch/arm/boot/dts/moxart-uc7112lx.dts
+++ b/arch/arm/boot/dts/moxart-uc7112lx.dts
@@ -79,7 +79,7 @@
 	clocks = <&ref12>;
 };
 
-&sdhci {
+&mmc {
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/moxart.dtsi b/arch/arm/boot/dts/moxart.dtsi
index f5f070a87482..764832ddfa78 100644
--- a/arch/arm/boot/dts/moxart.dtsi
+++ b/arch/arm/boot/dts/moxart.dtsi
@@ -93,8 +93,8 @@
 			clock-names = "PCLK";
 		};
 
-		sdhci: sdhci@98e00000 {
-			compatible = "moxa,moxart-sdhci";
+		mmc: mmc@98e00000 {
+			compatible = "moxa,moxart-mmc";
 			reg = <0x98e00000 0x5C>;
 			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_apb>;
diff --git a/arch/arm/boot/dts/mstar-infinity.dtsi b/arch/arm/boot/dts/mstar-infinity.dtsi
index 0bee517797f4..441a917b88ba 100644
--- a/arch/arm/boot/dts/mstar-infinity.dtsi
+++ b/arch/arm/boot/dts/mstar-infinity.dtsi
@@ -8,6 +8,40 @@
 
 #include <dt-bindings/gpio/msc313-gpio.h>
 
+/ {
+	cpu0_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-240000000 {
+			opp-hz = /bits/ 64 <240000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <300000>;
+		};
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <300000>;
+		};
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <300000>;
+		};
+	};
+};
+
+&cpu0 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
+
 &imi {
 	reg = <0xa0000000 0x16000>;
 };
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd201-som2d01.dtsi b/arch/arm/boot/dts/mstar-infinity2m-ssd201-som2d01.dtsi
new file mode 100644
index 000000000000..34df472fed71
--- /dev/null
+++ b/arch/arm/boot/dts/mstar-infinity2m-ssd201-som2d01.dtsi
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2021 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ * Author: Romain Perier <romain.perier@gmail.com>
+ */
+
+/ {
+	reg_vcc_dram: regulator-vcc-dram {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_dram";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+	};
+};
+
+&pm_uart {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-100ask-dongshanpione.dts b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-100ask-dongshanpione.dts
new file mode 100644
index 000000000000..f25a04c98ccb
--- /dev/null
+++ b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-100ask-dongshanpione.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2021 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+/dts-v1/;
+#include "mstar-infinity2m-ssd202d.dtsi"
+
+/ {
+	model = "DongShanPi One";
+	compatible = "100ask,dongshanpione", "mstar,infinity2m";
+
+	aliases {
+		serial0 = &pm_uart;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&pm_uart {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-miyoo-mini.dts b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-miyoo-mini.dts
new file mode 100644
index 000000000000..1bbbf47132dc
--- /dev/null
+++ b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-miyoo-mini.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2021 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+/dts-v1/;
+#include "mstar-infinity2m-ssd202d.dtsi"
+
+/ {
+	model = "Miyoo Mini";
+	compatible = "miyoo,miyoo-mini", "mstar,infinity2m";
+
+	aliases {
+		serial0 = &pm_uart;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&pm_uart {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dts b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dts
new file mode 100644
index 000000000000..b15c40762bc0
--- /dev/null
+++ b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2021 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ * Author: Romain Perier <romain.perier@gmail.com>
+ */
+
+/dts-v1/;
+#include "mstar-infinity2m-ssd202d-wirelesstag-ido-som2d01.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Wireless Tag IDO-SBC2D06-1VB-22W";
+	compatible = "wirelesstag,ido-sbc2d06-v1b-22w", "mstar,infinity2m";
+
+	leds {
+		compatible = "gpio-leds";
+		sys_led {
+			gpios = <&gpio SSD20XD_GPIO_GPIO85 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-som2d01.dtsi b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-som2d01.dtsi
new file mode 100644
index 000000000000..d877aff85033
--- /dev/null
+++ b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-som2d01.dtsi
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2021 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ * Author: Romain Perier <romain.perier@gmail.com>
+ */
+
+/dts-v1/;
+#include "mstar-infinity2m-ssd202d.dtsi"
+#include "mstar-infinity2m-ssd201-som2d01.dtsi"
+
+/ {
+	model = "Wireless Tag IDO-SOM2D01 (SSD202D)";
+	compatible = "wirelesstag,ido-som2d01", "mstar,infinity2m";
+
+	aliases {
+		serial0 = &pm_uart;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&reg_vcc_dram {
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+};
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd20xd.dtsi b/arch/arm/boot/dts/mstar-infinity2m-ssd20xd.dtsi
index 7a5e28b33f96..6f067da61ba3 100644
--- a/arch/arm/boot/dts/mstar-infinity2m-ssd20xd.dtsi
+++ b/arch/arm/boot/dts/mstar-infinity2m-ssd20xd.dtsi
@@ -6,6 +6,11 @@
 
 #include "mstar-infinity2m.dtsi"
 
+&gpio {
+	compatible = "sstar,ssd20xd-gpio";
+	status = "okay";
+};
+
 &smpctrl {
 	compatible = "sstar,ssd201-smpctrl", "mstar,smpctrl";
 	status = "okay";
diff --git a/arch/arm/boot/dts/mstar-infinity2m.dtsi b/arch/arm/boot/dts/mstar-infinity2m.dtsi
index 6d4d1d224e96..1b485efd7156 100644
--- a/arch/arm/boot/dts/mstar-infinity2m.dtsi
+++ b/arch/arm/boot/dts/mstar-infinity2m.dtsi
@@ -6,11 +6,28 @@
 
 #include "mstar-infinity.dtsi"
 
+&cpu0_opp_table {
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <300000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <300000>;
+		};
+};
+
 &cpus {
 	cpu1: cpu@1 {
 		device_type = "cpu";
 		compatible = "arm,cortex-a7";
+		operating-points-v2 = <&cpu0_opp_table>;
 		reg = <0x1>;
+		clocks = <&cpupll>;
+		clock-names = "cpuclk";
 	};
 };
 
diff --git a/arch/arm/boot/dts/mstar-infinity3.dtsi b/arch/arm/boot/dts/mstar-infinity3.dtsi
index 9857e2a9934d..a56cf29e5d82 100644
--- a/arch/arm/boot/dts/mstar-infinity3.dtsi
+++ b/arch/arm/boot/dts/mstar-infinity3.dtsi
@@ -6,6 +6,64 @@
 
 #include "mstar-infinity.dtsi"
 
+&cpu0_opp_table {
+	opp-1008000000 {
+		opp-hz = /bits/ 64 <1008000000>;
+		opp-microvolt = <1000000>;
+		clock-latency-ns = <300000>;
+	};
+
+	// overclock frequencies below, shown to work fine up to 1.3 GHz
+	opp-108000000 {
+		opp-hz = /bits/ 64 <1080000000>;
+		opp-microvolt = <1000000>;
+		clock-latency-ns = <300000>;
+		turbo-mode;
+	};
+
+	opp-1188000000 {
+		opp-hz = /bits/ 64 <1188000000>;
+		opp-microvolt = <1000000>;
+		clock-latency-ns = <300000>;
+		turbo-mode;
+	};
+
+	opp-1296000000 {
+		opp-hz = /bits/ 64 <1296000000>;
+		opp-microvolt = <1000000>;
+		clock-latency-ns = <300000>;
+		turbo-mode;
+	};
+
+	opp-1350000000 {
+		opp-hz = /bits/ 64 <1350000000>;
+		opp-microvolt = <1000000>;
+		clock-latency-ns = <300000>;
+		turbo-mode;
+	};
+
+	opp-1404000000 {
+		opp-hz = /bits/ 64 <1404000000>;
+		opp-microvolt = <1000000>;
+		clock-latency-ns = <300000>;
+		turbo-mode;
+	};
+
+	opp-1458000000 {
+		opp-hz = /bits/ 64 <1458000000>;
+		opp-microvolt = <1000000>;
+		clock-latency-ns = <300000>;
+		turbo-mode;
+	};
+
+	opp-1512000000 {
+		opp-hz = /bits/ 64 <1512000000>;
+		opp-microvolt = <1000000>;
+		clock-latency-ns = <300000>;
+		turbo-mode;
+	};
+};
+
 &imi {
 	reg = <0xa0000000 0x20000>;
 };
diff --git a/arch/arm/boot/dts/mstar-v7.dtsi b/arch/arm/boot/dts/mstar-v7.dtsi
index 89ebfe4f29da..c26ba9b7b6dd 100644
--- a/arch/arm/boot/dts/mstar-v7.dtsi
+++ b/arch/arm/boot/dts/mstar-v7.dtsi
@@ -21,6 +21,8 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x0>;
+			clocks = <&cpupll>;
+			clock-names = "cpuclk";
 		};
 	};
 
@@ -155,6 +157,13 @@
 				clocks = <&xtal>;
 			};
 
+			cpupll: cpupll@206400 {
+				compatible = "mstar,msc313-cpupll";
+				reg = <0x206400 0x200>;
+				#clock-cells = <0>;
+				clocks = <&mpll MSTAR_MSC313_MPLL_DIV2>;
+			};
+
 			gpio: gpio@207800 {
 				#gpio-cells = <2>;
 				reg = <0x207800 0x200>;
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index 4776f85d6d5b..b8eba3ba153c 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -427,9 +427,9 @@
 
 		afe: audio-controller {
 			compatible = "mediatek,mt2701-audio";
-			interrupts =  <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
 				      <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
-			interrupt-names	= "afe", "asys";
+			interrupt-names = "afe", "asys";
 			power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
 
 			clocks = <&infracfg CLK_INFRA_AUDIO>,
@@ -559,12 +559,11 @@
 		compatible = "mediatek,mt2701-jpgdec";
 		reg = <0 0x15004000 0 0x1000>;
 		interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
-		clocks =  <&imgsys CLK_IMG_JPGDEC_SMI>,
+		clocks = <&imgsys CLK_IMG_JPGDEC_SMI>,
 			  <&imgsys CLK_IMG_JPGDEC>;
 		clock-names = "jpgdec-smi",
 			      "jpgdec";
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-		mediatek,larb = <&larb2>;
 		iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
 			 <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
 	};
@@ -574,10 +573,9 @@
 			     "mediatek,mtk-jpgenc";
 		reg = <0 0x1500a000 0 0x1000>;
 		interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_LOW>;
-		clocks =  <&imgsys CLK_IMG_VENC>;
+		clocks = <&imgsys CLK_IMG_VENC>;
 		clock-names = "jpgenc";
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-		mediatek,larb = <&larb2>;
 		iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>,
 			 <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>;
 	};
diff --git a/arch/arm/boot/dts/mt6582-prestigio-pmt5008-3g.dts b/arch/arm/boot/dts/mt6582-prestigio-pmt5008-3g.dts
new file mode 100644
index 000000000000..b057e037f940
--- /dev/null
+++ b/arch/arm/boot/dts/mt6582-prestigio-pmt5008-3g.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021 Maxim Kutnij <gtk3@inbox.ru>
+ */
+
+/dts-v1/;
+#include "mt6582.dtsi"
+
+/ {
+	model = "Prestigio PMT5008 3G";
+	compatible = "prestigio,pmt5008-3g", "mediatek,mt6582";
+
+	aliases {
+		bootargs = "console=ttyS0,921600n8 earlyprintk";
+		serial0 = &uart0;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mt6582.dtsi b/arch/arm/boot/dts/mt6582.dtsi
new file mode 100644
index 000000000000..4263371784cd
--- /dev/null
+++ b/arch/arm/boot/dts/mt6582.dtsi
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021 Maxim Kutnij <gtk3@inbox.ru>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "mediatek,mt6582";
+	interrupt-parent = <&sysirq>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+		};
+	};
+
+	system_clk: dummy13m {
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+		#clock-cells = <0>;
+	};
+
+	rtc_clk: dummy32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32000>;
+		#clock-cells = <0>;
+	};
+
+	uart_clk: dummy26m {
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+		#clock-cells = <0>;
+	};
+
+	timer: timer@11008000 {
+		compatible = "mediatek,mt6577-timer";
+		reg = <0x10008000 0x80>;
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&system_clk>, <&rtc_clk>;
+		clock-names = "system-clk", "rtc-clk";
+	};
+
+	sysirq: interrupt-controller@10200100 {
+		compatible = "mediatek,mt6582-sysirq",
+			     "mediatek,mt6577-sysirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0x10200100 0x1c>;
+	};
+
+	gic: interrupt-controller@10211000 {
+		compatible = "arm,cortex-a7-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0x10211000 0x1000>,
+		      <0x10212000 0x2000>,
+		      <0x10214000 0x2000>,
+		      <0x10216000 0x2000>;
+	};
+
+	uart0: serial@11002000 {
+		compatible = "mediatek,mt6582-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0x11002000 0x400>;
+		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	uart1: serial@11003000 {
+		compatible = "mediatek,mt6582-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0x11003000 0x400>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	uart2: serial@11004000 {
+		compatible = "mediatek,mt6582-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0x11004000 0x400>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	uart3: serial@11005000 {
+		compatible = "mediatek,mt6582-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0x11005000 0x400>;
+		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	watchdog: watchdog@10007000 {
+		compatible = "mediatek,mt6582-wdt",
+			     "mediatek,mt6589-wdt";
+		reg = <0x10007000 0x100>;
+	};
+};
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index f4848362b3be..25d31e40a553 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -241,7 +241,7 @@
 	};
 
 	pericfg: syscon@10003000 {
-		compatible =  "mediatek,mt7623-pericfg",
+		compatible = "mediatek,mt7623-pericfg",
 			      "mediatek,mt2701-pericfg",
 			      "syscon";
 		reg = <0 0x10003000 0 0x1000>;
@@ -628,9 +628,9 @@
 		afe: audio-controller {
 			compatible = "mediatek,mt7623-audio",
 				     "mediatek,mt2701-audio";
-			interrupts =  <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
 				      <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
-			interrupt-names	= "afe", "asys";
+			interrupt-names = "afe", "asys";
 			power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
 
 			clocks = <&infracfg CLK_INFRA_AUDIO>,
diff --git a/arch/arm/boot/dts/mt7623a-rfb-emmc.dts b/arch/arm/boot/dts/mt7623a-rfb-emmc.dts
index 13c86936d1c8..e8b4b6d30d19 100644
--- a/arch/arm/boot/dts/mt7623a-rfb-emmc.dts
+++ b/arch/arm/boot/dts/mt7623a-rfb-emmc.dts
@@ -45,13 +45,13 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&key_pins_a>;
 
-		factory {
+		button-factory {
 			label = "factory";
 			linux,code = <BTN_0>;
 			gpios = <&pio 256 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "wps";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/mt7623a-rfb-nand.dts b/arch/arm/boot/dts/mt7623a-rfb-nand.dts
index 88d8f0b2f4c2..61f5da68d4b0 100644
--- a/arch/arm/boot/dts/mt7623a-rfb-nand.dts
+++ b/arch/arm/boot/dts/mt7623a-rfb-nand.dts
@@ -45,13 +45,13 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&key_pins_a>;
 
-		factory {
+		button-factory {
 			label = "factory";
 			linux,code = <BTN_0>;
 			gpios = <&pio 256 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "wps";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
index 027c1b0c6a98..5008115d2494 100644
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -91,13 +91,13 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&key_pins_a>;
 
-		factory {
+		button-factory {
 			label = "factory";
 			linux,code = <BTN_0>;
 			gpios = <&pio 256 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "wps";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
index 1b9b9a8145a7..bf67a8e9be59 100644
--- a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
+++ b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
@@ -60,13 +60,13 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&key_pins_a>;
 
-		factory {
+		button-factory {
 			label = "factory";
 			linux,code = <BTN_0>;
 			gpios = <&pio 256 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "wps";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/mt7623n.dtsi b/arch/arm/boot/dts/mt7623n.dtsi
index bcb0846e29fd..3adab5cd1fef 100644
--- a/arch/arm/boot/dts/mt7623n.dtsi
+++ b/arch/arm/boot/dts/mt7623n.dtsi
@@ -121,7 +121,6 @@
 		clock-names = "jpgdec-smi",
 			      "jpgdec";
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-		mediatek,larb = <&larb2>;
 		iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
 			 <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
 	};
@@ -144,7 +143,6 @@
 		interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&mmsys CLK_MM_DISP_OVL>;
 		iommus = <&iommu MT2701_M4U_PORT_DISP_OVL_0>;
-		mediatek,larb = <&larb0>;
 	};
 
 	rdma0: rdma@14008000 {
@@ -154,7 +152,6 @@
 		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&mmsys CLK_MM_DISP_RDMA>;
 		iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA>;
-		mediatek,larb = <&larb0>;
 	};
 
 	wdma@14009000 {
@@ -164,7 +161,6 @@
 		interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&mmsys CLK_MM_DISP_WDMA>;
 		iommus = <&iommu MT2701_M4U_PORT_DISP_WDMA>;
-		mediatek,larb = <&larb0>;
 	};
 
 	bls: pwm@1400a000 {
@@ -215,7 +211,6 @@
 		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&mmsys CLK_MM_DISP_RDMA1>;
 		iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA1>;
-		mediatek,larb = <&larb0>;
 	};
 
 	dpi0: dpi@14014000 {
diff --git a/arch/arm/boot/dts/mt7629-rfb.dts b/arch/arm/boot/dts/mt7629-rfb.dts
index eb536cbebd9b..84e14bee7235 100644
--- a/arch/arm/boot/dts/mt7629-rfb.dts
+++ b/arch/arm/boot/dts/mt7629-rfb.dts
@@ -23,13 +23,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		reset {
+		button-reset {
 			label = "factory";
 			linux,code = <KEY_RESTART>;
 			gpios = <&pio 60 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "wps";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&pio 58 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/mxs-pinfunc.h b/arch/arm/boot/dts/mxs-pinfunc.h
index c6da987b20cb..31297abcbc71 100644
--- a/arch/arm/boot/dts/mxs-pinfunc.h
+++ b/arch/arm/boot/dts/mxs-pinfunc.h
@@ -1,14 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Header providing constants for i.MX28 pinctrl bindings.
  *
  * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 #ifndef __DT_BINDINGS_MXS_PINCTRL_H__
diff --git a/arch/arm/boot/dts/nspire-classic.dtsi b/arch/arm/boot/dts/nspire-classic.dtsi
index 41744cc2bc72..01e1bb7c3c6c 100644
--- a/arch/arm/boot/dts/nspire-classic.dtsi
+++ b/arch/arm/boot/dts/nspire-classic.dtsi
@@ -17,7 +17,7 @@
 
 &fast_timer {
 	/* compatible = "lsi,zevio-timer"; */
-	reg = <0x90010000 0x1000>, <0x900A0010 0x8>;
+	reg = <0x90010000 0x1000>, <0x900a0010 0x8>;
 };
 
 &uart {
@@ -30,12 +30,12 @@
 
 &timer0 {
 	/* compatible = "lsi,zevio-timer"; */
-	reg = <0x900C0000 0x1000>, <0x900A0018 0x8>;
+	reg = <0x900c0000 0x1000>, <0x900a0018 0x8>;
 };
 
 &timer1 {
 	compatible = "lsi,zevio-timer";
-	reg = <0x900D0000 0x1000>, <0x900A0020 0x8>;
+	reg = <0x900d0000 0x1000>, <0x900a0020 0x8>;
 };
 
 &keypad {
@@ -66,10 +66,10 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 
-		intc: interrupt-controller@DC000000 {
+		intc: interrupt-controller@dc000000 {
 			compatible = "lsi,zevio-intc";
 			interrupt-controller;
-			reg = <0xDC000000 0x1000>;
+			reg = <0xdc000000 0x1000>;
 			#interrupt-cells = <1>;
 		};
 	};
diff --git a/arch/arm/boot/dts/nspire-cx.dts b/arch/arm/boot/dts/nspire-cx.dts
index 0c16b04e2744..590b7dff6ae5 100644
--- a/arch/arm/boot/dts/nspire-cx.dts
+++ b/arch/arm/boot/dts/nspire-cx.dts
@@ -92,10 +92,10 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 
-		intc: interrupt-controller@DC000000 {
+		intc: interrupt-controller@dc000000 {
 			compatible = "arm,pl190-vic";
 			interrupt-controller;
-			reg = <0xDC000000 0x1000>;
+			reg = <0xdc000000 0x1000>;
 			#interrupt-cells = <1>;
 		};
 
diff --git a/arch/arm/boot/dts/nspire.dtsi b/arch/arm/boot/dts/nspire.dtsi
index 90e033d9141f..bb240e6a3a6f 100644
--- a/arch/arm/boot/dts/nspire.dtsi
+++ b/arch/arm/boot/dts/nspire.dtsi
@@ -20,9 +20,9 @@
 		reg = <0x00000000 0x80000>;
 	};
 
-	sram: sram@A4000000 {
+	sram: sram@a4000000 {
 		device = "memory";
-		reg = <0xA4000000 0x20000>;
+		reg = <0xa4000000 0x20000>;
 	};
 
 	timer_clk: timer_clk {
@@ -33,12 +33,12 @@
 
 	base_clk: base_clk {
 		#clock-cells = <0>;
-		reg = <0x900B0024 0x4>;
+		reg = <0x900b0024 0x4>;
 	};
 
 	ahb_clk: ahb_clk {
 		#clock-cells = <0>;
-		reg = <0x900B0024 0x4>;
+		reg = <0x900b0024 0x4>;
 		clocks = <&base_clk>;
 	};
 
@@ -71,28 +71,28 @@
 		#size-cells = <1>;
 		ranges;
 
-		spi: spi@A9000000 {
-			reg = <0xA9000000 0x1000>;
+		spi: spi@a9000000 {
+			reg = <0xa9000000 0x1000>;
 		};
 
-		usb0: usb@B0000000 {
+		usb0: usb@b0000000 {
 			compatible = "lsi,zevio-usb";
-			reg = <0xB0000000 0x1000>;
+			reg = <0xb0000000 0x1000>;
 			interrupts = <8>;
 
 			usb-phy = <&usb_phy>;
 			vbus-supply = <&vbus_reg>;
 		};
 
-		usb1: usb@B4000000 {
-			reg = <0xB4000000 0x1000>;
+		usb1: usb@b4000000 {
+			reg = <0xb4000000 0x1000>;
 			interrupts = <9>;
 			status = "disabled";
 		};
 
-		lcd: lcd@C0000000 {
+		lcd: lcd@c0000000 {
 			compatible = "arm,pl111", "arm,primecell";
-			reg = <0xC0000000 0x1000>;
+			reg = <0xc0000000 0x1000>;
 			interrupts = <21>;
 
 			/*
@@ -105,17 +105,17 @@
 			clock-names = "clcdclk", "apb_pclk";
 		};
 
-		adc: adc@C4000000 {
-			reg = <0xC4000000 0x1000>;
+		adc: adc@c4000000 {
+			reg = <0xc4000000 0x1000>;
 			interrupts = <11>;
 		};
 
-		tdes: crypto@C8010000 {
-			reg = <0xC8010000 0x1000>;
+		tdes: crypto@c8010000 {
+			reg = <0xc8010000 0x1000>;
 		};
 
-		sha256: crypto@CC000000 {
-			reg = <0xCC000000 0x1000>;
+		sha256: crypto@cc000000 {
+			reg = <0xcc000000 0x1000>;
 		};
 
 		apb@90000000 {
@@ -143,16 +143,16 @@
 				interrupts = <1>;
 			};
 
-			timer0: timer@900C0000 {
-				reg = <0x900C0000 0x1000>;
+			timer0: timer@900c0000 {
+				reg = <0x900c0000 0x1000>;
 				clocks = <&timer_clk>, <&timer_clk>,
 					 <&timer_clk>;
 				clock-names = "timer0clk", "timer1clk",
 					      "apb_pclk";
 			};
 
-			timer1: timer@900D0000 {
-				reg = <0x900D0000 0x1000>;
+			timer1: timer@900d0000 {
+				reg = <0x900d0000 0x1000>;
 				interrupts = <19>;
 				clocks = <&timer_clk>, <&timer_clk>,
 					 <&timer_clk>;
@@ -171,18 +171,18 @@
 				interrupts = <4>;
 			};
 
-			misc: misc@900A0000 {
-				reg = <0x900A0000 0x1000>;
+			misc: misc@900a0000 {
+				reg = <0x900a0000 0x1000>;
 			};
 
-			pwr: pwr@900B0000 {
-				reg = <0x900B0000 0x1000>;
+			pwr: pwr@900b0000 {
+				reg = <0x900b0000 0x1000>;
 				interrupts = <15>;
 			};
 
-			keypad: input@900E0000 {
+			keypad: input@900e0000 {
 				compatible = "ti,nspire-keypad";
-				reg = <0x900E0000 0x1000>;
+				reg = <0x900e0000 0x1000>;
 				interrupts = <16>;
 
 				scan-interval = <1000>;
@@ -191,8 +191,8 @@
 				clocks = <&apb_pclk>;
 			};
 
-			contrast: contrast@900F0000 {
-				reg = <0x900F0000 0x1000>;
+			contrast: contrast@900f0000 {
+				reg = <0x900f0000 0x1000>;
 			};
 
 			led: led@90110000 {
diff --git a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
index 3696980a3da1..c7b5ef15b716 100644
--- a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
+++ b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
@@ -110,6 +110,7 @@
 			compatible = "nuvoton,npcm750-reset";
 			reg = <0xf0801000 0x70>;
 			#reset-cells = <2>;
+			nuvoton,sysgcr = <&gcr>;
 		};
 
 		clk: clock-controller@f0801000 {
@@ -128,7 +129,7 @@
 			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "macirq";
 			ethernet = <0>;
-			clocks	= <&clk_rg1refck>, <&clk NPCM7XX_CLK_AHB>;
+			clocks = <&clk_rg1refck>, <&clk NPCM7XX_CLK_AHB>;
 			clock-names = "stmmaceth", "clk_gmac";
 			pinctrl-names = "default";
 			pinctrl-0 = <&rg1_pins
diff --git a/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts b/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts
index eb6eb21cb2a4..d10669fcd527 100644
--- a/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts
+++ b/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts
@@ -358,7 +358,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi0cs1_pins>;
 	status = "okay";
-	spi-nor@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -406,7 +406,7 @@
 	pinctrl-0 = <&spi3_pins>, <&spi3cs1_pins>;
 	status = "okay";
 
-	spi-nor@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -416,7 +416,7 @@
 		m25p,fast-read;
 		label = "pnor";
 	};
-	spi-nor@1 {
+	flash@1 {
 		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts b/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts
index d4ff49939a3d..491606c4f044 100644
--- a/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts
+++ b/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts
@@ -135,7 +135,7 @@
 	pinctrl-0 = <&spi0cs1_pins>;
 	status = "okay";
 
-	spi-nor@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts b/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts
index 82a104b2a65f..a0c2d7652625 100644
--- a/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts
+++ b/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts
@@ -380,7 +380,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi0cs1_pins>;
 	status = "okay";
-	spi-nor@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -415,7 +415,7 @@
 			};
 		};
 	};
-	spi-nor@1 {
+	flash@1 {
 		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -440,7 +440,7 @@
 
 &fiu3 {
 	pinctrl-0 = <&spi3_pins>;
-	spi-nor@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
index 0334641f8829..3dad32834e5e 100644
--- a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
+++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
@@ -67,7 +67,7 @@
 
 &fiu0 {
 	status = "okay";
-	spi-nor@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -128,7 +128,7 @@
 &fiu3 {
 	pinctrl-0 = <&spi3_pins>, <&spi3quad_pins>;
 	status = "okay";
-	spi-nor@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -324,7 +324,7 @@
 &spi0 {
 	cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
 	status = "okay";
-	Flash@0 {
+	flash@0 {
 		compatible = "winbond,w25q128",
 		"jedec,spi-nor";
 		reg = <0x0>;
@@ -345,7 +345,7 @@
 &spi1 {
 	cs-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
 	status = "okay";
-	Flash@0 {
+	flash@0 {
 		compatible = "winbond,w25q128fw",
 		"jedec,spi-nor";
 		reg = <0x0>;
diff --git a/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts b/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts
index 767e0ac0df7c..132e702281fc 100644
--- a/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts
+++ b/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts
@@ -100,7 +100,7 @@
 	pinctrl-0 = <&spi0cs1_pins>;
 	status = "okay";
 
-	spi-nor@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -139,7 +139,7 @@
 		};
 	};
 
-	spi-nor@1 {
+	flash@1 {
 		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -166,7 +166,7 @@
 	pinctrl-0 = <&spi3_pins>;
 	status = "okay";
 
-	spi-nor@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/nuvoton-npcm750.dtsi b/arch/arm/boot/dts/nuvoton-npcm750.dtsi
index 13eee0fe5642..30eed40b89b5 100644
--- a/arch/arm/boot/dts/nuvoton-npcm750.dtsi
+++ b/arch/arm/boot/dts/nuvoton-npcm750.dtsi
@@ -51,7 +51,7 @@
 			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "macirq";
 			ethernet = <1>;
-			clocks	= <&clk_rg2refck>, <&clk NPCM7XX_CLK_AHB>;
+			clocks = <&clk_rg2refck>, <&clk NPCM7XX_CLK_AHB>;
 			clock-names = "stmmaceth", "clk_gmac";
 			pinctrl-names = "default";
 			pinctrl-0 = <&rg2_pins
diff --git a/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts b/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
index 83f27fbf4e93..3ee61251a16d 100644
--- a/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
+++ b/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
@@ -8,6 +8,9 @@
 
 #include "nuvoton-wpcm450.dtsi"
 
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	model = "Supermicro X9SCi-LN4F BMC";
 	compatible = "supermicro,x9sci-ln4f-bmc", "nuvoton,wpcm450";
@@ -20,6 +23,46 @@
 		device_type = "memory";
 		reg = <0 0x08000000>; /* 128 MiB */
 	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_pins>;
+
+		uid {
+			label = "UID button";
+			linux,code = <KEY_HOME>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		uid {
+			label = "UID";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		heartbeat {
+			label = "heartbeat";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pinctrl {
+	key_pins: mux-keys {
+		groups = "gspi", "sspi";
+		function = "gpio";
+	};
+
+	led_pins: mux-leds {
+		groups = "hg3", "hg0", "pwm4";
+		function = "gpio";
+	};
 };
 
 &serial0 {
diff --git a/arch/arm/boot/dts/nuvoton-wpcm450.dtsi b/arch/arm/boot/dts/nuvoton-wpcm450.dtsi
index d7cbeb187484..93595850a4c3 100644
--- a/arch/arm/boot/dts/nuvoton-wpcm450.dtsi
+++ b/arch/arm/boot/dts/nuvoton-wpcm450.dtsi
@@ -8,6 +8,17 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+		gpio5 = &gpio5;
+		gpio6 = &gpio6;
+		gpio7 = &gpio7;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -33,12 +44,19 @@
 		interrupt-parent = <&aic>;
 		ranges;
 
+		gcr: syscon@b0000000 {
+			compatible = "nuvoton,wpcm450-gcr", "syscon", "simple-mfd";
+			reg = <0xb0000000 0x200>;
+		};
+
 		serial0: serial@b8000000 {
 			compatible = "nuvoton,wpcm450-uart";
 			reg = <0xb8000000 0x20>;
 			reg-shift = <2>;
 			interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk24m>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&bsp_pins>;
 			status = "disabled";
 		};
 
@@ -72,5 +90,371 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 		};
+
+		pinctrl: pinctrl@b8003000 {
+			compatible = "nuvoton,wpcm450-pinctrl";
+			reg = <0xb8003000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio0: gpio@0 {
+				reg = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
+					     <3 IRQ_TYPE_LEVEL_HIGH>,
+					     <4 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+			};
+
+			gpio1: gpio@1 {
+				reg = <1>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+			};
+
+			gpio2: gpio@2 {
+				reg = <2>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio3: gpio@3 {
+				reg = <3>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio4: gpio@4 {
+				reg = <4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio5: gpio@5 {
+				reg = <5>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio6: gpio@6 {
+				reg = <6>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio7: gpio@7 {
+				reg = <7>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			smb3_pins: mux-smb3 {
+				groups = "smb3";
+				function = "smb3";
+			};
+
+			smb4_pins: mux-smb4 {
+				groups = "smb4";
+				function = "smb4";
+			};
+
+			smb5_pins: mux-smb5 {
+				groups = "smb5";
+				function = "smb5";
+			};
+
+			scs1_pins: mux-scs1 {
+				groups = "scs1";
+				function = "scs1";
+			};
+
+			scs2_pins: mux-scs2 {
+				groups = "scs2";
+				function = "scs2";
+			};
+
+			scs3_pins: mux-scs3 {
+				groups = "scs3";
+				function = "scs3";
+			};
+
+			smb0_pins: mux-smb0 {
+				groups = "smb0";
+				function = "smb0";
+			};
+
+			smb1_pins: mux-smb1 {
+				groups = "smb1";
+				function = "smb1";
+			};
+
+			smb2_pins: mux-smb2 {
+				groups = "smb2";
+				function = "smb2";
+			};
+
+			bsp_pins: mux-bsp {
+				groups = "bsp";
+				function = "bsp";
+			};
+
+			hsp1_pins: mux-hsp1 {
+				groups = "hsp1";
+				function = "hsp1";
+			};
+
+			hsp2_pins: mux-hsp2 {
+				groups = "hsp2";
+				function = "hsp2";
+			};
+
+			r1err_pins: mux-r1err {
+				groups = "r1err";
+				function = "r1err";
+			};
+
+			r1md_pins: mux-r1md {
+				groups = "r1md";
+				function = "r1md";
+			};
+
+			rmii2_pins: mux-rmii2 {
+				groups = "rmii2";
+				function = "rmii2";
+			};
+
+			r2err_pins: mux-r2err {
+				groups = "r2err";
+				function = "r2err";
+			};
+
+			r2md_pins: mux-r2md {
+				groups = "r2md";
+				function = "r2md";
+			};
+
+			kbcc_pins: mux-kbcc {
+				groups = "kbcc";
+				function = "kbcc";
+			};
+
+			dvo0_pins: mux-dvo0 {
+				groups = "dvo";
+				function = "dvo0";
+			};
+
+			dvo3_pins: mux-dvo3 {
+				groups = "dvo";
+				function = "dvo3";
+			};
+
+			clko_pins: mux-clko {
+				groups = "clko";
+				function = "clko";
+			};
+
+			smi_pins: mux-smi {
+				groups = "smi";
+				function = "smi";
+			};
+
+			uinc_pins: mux-uinc {
+				groups = "uinc";
+				function = "uinc";
+			};
+
+			gspi_pins: mux-gspi {
+				groups = "gspi";
+				function = "gspi";
+			};
+
+			mben_pins: mux-mben {
+				groups = "mben";
+				function = "mben";
+			};
+
+			xcs2_pins: mux-xcs2 {
+				groups = "xcs2";
+				function = "xcs2";
+			};
+
+			xcs1_pins: mux-xcs1 {
+				groups = "xcs1";
+				function = "xcs1";
+			};
+
+			sdio_pins: mux-sdio {
+				groups = "sdio";
+				function = "sdio";
+			};
+
+			sspi_pins: mux-sspi {
+				groups = "sspi";
+				function = "sspi";
+			};
+
+			fi0_pins: mux-fi0 {
+				groups = "fi0";
+				function = "fi0";
+			};
+
+			fi1_pins: mux-fi1 {
+				groups = "fi1";
+				function = "fi1";
+			};
+
+			fi2_pins: mux-fi2 {
+				groups = "fi2";
+				function = "fi2";
+			};
+
+			fi3_pins: mux-fi3 {
+				groups = "fi3";
+				function = "fi3";
+			};
+
+			fi4_pins: mux-fi4 {
+				groups = "fi4";
+				function = "fi4";
+			};
+
+			fi5_pins: mux-fi5 {
+				groups = "fi5";
+				function = "fi5";
+			};
+
+			fi6_pins: mux-fi6 {
+				groups = "fi6";
+				function = "fi6";
+			};
+
+			fi7_pins: mux-fi7 {
+				groups = "fi7";
+				function = "fi7";
+			};
+
+			fi8_pins: mux-fi8 {
+				groups = "fi8";
+				function = "fi8";
+			};
+
+			fi9_pins: mux-fi9 {
+				groups = "fi9";
+				function = "fi9";
+			};
+
+			fi10_pins: mux-fi10 {
+				groups = "fi10";
+				function = "fi10";
+			};
+
+			fi11_pins: mux-fi11 {
+				groups = "fi11";
+				function = "fi11";
+			};
+
+			fi12_pins: mux-fi12 {
+				groups = "fi12";
+				function = "fi12";
+			};
+
+			fi13_pins: mux-fi13 {
+				groups = "fi13";
+				function = "fi13";
+			};
+
+			fi14_pins: mux-fi14 {
+				groups = "fi14";
+				function = "fi14";
+			};
+
+			fi15_pins: mux-fi15 {
+				groups = "fi15";
+				function = "fi15";
+			};
+
+			pwm0_pins: mux-pwm0 {
+				groups = "pwm0";
+				function = "pwm0";
+			};
+
+			pwm1_pins: mux-pwm1 {
+				groups = "pwm1";
+				function = "pwm1";
+			};
+
+			pwm2_pins: mux-pwm2 {
+				groups = "pwm2";
+				function = "pwm2";
+			};
+
+			pwm3_pins: mux-pwm3 {
+				groups = "pwm3";
+				function = "pwm3";
+			};
+
+			pwm4_pins: mux-pwm4 {
+				groups = "pwm4";
+				function = "pwm4";
+			};
+
+			pwm5_pins: mux-pwm5 {
+				groups = "pwm5";
+				function = "pwm5";
+			};
+
+			pwm6_pins: mux-pwm6 {
+				groups = "pwm6";
+				function = "pwm6";
+			};
+
+			pwm7_pins: mux-pwm7 {
+				groups = "pwm7";
+				function = "pwm7";
+			};
+
+			hg0_pins: mux-hg0 {
+				groups = "hg0";
+				function = "hg0";
+			};
+
+			hg1_pins: mux-hg1 {
+				groups = "hg1";
+				function = "hg1";
+			};
+
+			hg2_pins: mux-hg2 {
+				groups = "hg2";
+				function = "hg2";
+			};
+
+			hg3_pins: mux-hg3 {
+				groups = "hg3";
+				function = "hg3";
+			};
+
+			hg4_pins: mux-hg4 {
+				groups = "hg4";
+				function = "hg4";
+			};
+
+			hg5_pins: mux-hg5 {
+				groups = "hg5";
+				function = "hg5";
+			};
+
+			hg6_pins: mux-hg6 {
+				groups = "hg6";
+				function = "hg6";
+			};
+
+			hg7_pins: mux-hg7 {
+				groups = "hg7";
+				function = "hg7";
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
index 5750ca1233cc..afabb36a8ac1 100644
--- a/arch/arm/boot/dts/omap2.dtsi
+++ b/arch/arm/boot/dts/omap2.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for OMAP2 SoC
  *
  * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/bus/ti-sysc.h>
diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts
index af964f139abf..5acf5dd87c59 100644
--- a/arch/arm/boot/dts/omap2420-h4.dts
+++ b/arch/arm/boot/dts/omap2420-h4.dts
@@ -21,7 +21,7 @@
 
 	nor@0,0 {
 		compatible = "cfi-flash";
-		linux,mtd-name= "intel,ge28f256l18b85";
+		linux,mtd-name = "intel,ge28f256l18b85";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0 0 0x04000000>;
diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi
index bb529a2a295d..821da51cb870 100644
--- a/arch/arm/boot/dts/omap2420.dtsi
+++ b/arch/arm/boot/dts/omap2420.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for OMAP2420 SoC
  *
  * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include "omap2.dtsi"
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
index 23115ba61bc0..b9a9e6e45266 100644
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for OMAP243x SoC
  *
  * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include "omap2.dtsi"
diff --git a/arch/arm/boot/dts/omap3-beagle-ab4.dts b/arch/arm/boot/dts/omap3-beagle-ab4.dts
new file mode 100644
index 000000000000..990ff2d84686
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-beagle-ab4.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "omap3-beagle.dts"
+
+/ {
+	model = "TI OMAP3 BeagleBoard A to B4";
+	compatible = "ti,omap3-beagle-ab4", "ti,omap3-beagle", "ti,omap3430", "ti,omap3";
+};
+
+/*
+ * Workaround for capacitor C70 issue, see "Boards revision A and < B5"
+ * section at https://elinux.org/BeagleBoard_Community
+ */
+
+/* Unusable as clocksource because of unreliable oscillator */
+&counter32k {
+	status = "disabled";
+};
+
+/* Unusable as clockevent because of unreliable oscillator, allow to idle */
+&timer1_target {
+	/delete-property/ti,no-reset-on-init;
+	/delete-property/ti,no-idle;
+	timer@0 {
+		/delete-property/ti,timer-alwon;
+	};
+};
+
+/* Preferred always-on timer for clocksource */
+&timer12_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		/* Always clocked by secure_32k_fck */
+	};
+};
+
+/* Preferred timer for clockevent */
+&timer2_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&gpt2_fck>;
+		assigned-clock-parents = <&sys_ck>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index a858ebfa1500..35eced6521ef 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -370,7 +370,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ethernet: usbether@1 {
+		ethernet: ethernet@1 {
 			compatible = "usb424,ec00";
 			reg = <1>;
 		};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index f9f34b8458e9..0548b391334f 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -304,39 +304,6 @@
 	phys = <0 &hsusb2_phy>;
 };
 
-/* Unusable as clocksource because of unreliable oscillator */
-&counter32k {
-	status = "disabled";
-};
-
-/* Unusable as clockevent because if unreliable oscillator, allow to idle */
-&timer1_target {
-	/delete-property/ti,no-reset-on-init;
-	/delete-property/ti,no-idle;
-	timer@0 {
-		/delete-property/ti,timer-alwon;
-	};
-};
-
-/* Preferred always-on timer for clocksource */
-&timer12_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		/* Always clocked by secure_32k_fck */
-	};
-};
-
-/* Preferred timer for clockevent */
-&timer2_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		assigned-clocks = <&gpt2_fck>;
-		assigned-clock-parents = <&sys_ck>;
-	};
-};
-
 &twl_gpio {
 	ti,use-leds;
 	/* pullups: BIT(1) */
diff --git a/arch/arm/boot/dts/omap3-cpu-thermal.dtsi b/arch/arm/boot/dts/omap3-cpu-thermal.dtsi
index a9069cca5888..0da759f8e2c2 100644
--- a/arch/arm/boot/dts/omap3-cpu-thermal.dtsi
+++ b/arch/arm/boot/dts/omap3-cpu-thermal.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for OMAP3 SoC CPU thermal
  *
  * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/thermal/thermal.h>
diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
index 5e55198e4576..54cd37336be7 100644
--- a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
+++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
@@ -158,6 +158,24 @@
 	status = "disabled";
 };
 
+/* Unusable as clockevent because if unreliable oscillator, allow to idle */
+&timer1_target {
+	/delete-property/ti,no-reset-on-init;
+	/delete-property/ti,no-idle;
+	timer@0 {
+		/delete-property/ti,timer-alwon;
+	};
+};
+
+/* Preferred timer for clockevent */
+&timer12_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		/* Always clocked by secure_32k_fck */
+	};
+};
+
 &twl_gpio {
 	ti,use-leds;
 	/*
diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts
index c2995a280729..162d0726b008 100644
--- a/arch/arm/boot/dts/omap3-devkit8000.dts
+++ b/arch/arm/boot/dts/omap3-devkit8000.dts
@@ -14,36 +14,3 @@
 		display2 = &tv0;
 	};
 };
-
-/* Unusable as clocksource because of unreliable oscillator */
-&counter32k {
-	status = "disabled";
-};
-
-/* Unusable as clockevent because if unreliable oscillator, allow to idle */
-&timer1_target {
-	/delete-property/ti,no-reset-on-init;
-	/delete-property/ti,no-idle;
-	timer@0 {
-		/delete-property/ti,timer-alwon;
-	};
-};
-
-/* Preferred always-on timer for clocksource */
-&timer12_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		/* Always clocked by secure_32k_fck */
-	};
-};
-
-/* Preferred timer for clockevent */
-&timer2_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		assigned-clocks = <&gpt2_fck>;
-		assigned-clock-parents = <&sys_ck>;
-	};
-};
diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts
index c9332195d096..abd403c228c7 100644
--- a/arch/arm/boot/dts/omap3-evm-37xx.dts
+++ b/arch/arm/boot/dts/omap3-evm-37xx.dts
@@ -60,7 +60,7 @@
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		linux,mtd-name= "hynix,h8kds0un0mer-4em";
+		linux,mtd-name = "hynix,h8kds0un0mer-4em";
 		nand-bus-width = <16>;
 		gpmc,device-width = <2>;
 		ti,nand-ecc-opt = "bch8";
diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts
index 5cc0cf7cd16c..f95eea63b355 100644
--- a/arch/arm/boot/dts/omap3-evm.dts
+++ b/arch/arm/boot/dts/omap3-evm.dts
@@ -60,7 +60,7 @@
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		linux,mtd-name= "micron,mt29f2g16abdhc";
+		linux,mtd-name = "micron,mt29f2g16abdhc";
 		nand-bus-width = <16>;
 		gpmc,device-width = <2>;
 		ti,nand-ecc-opt = "bch8";
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index 7e3d8147e2c1..28a6a9345be5 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -31,6 +31,8 @@
 	aliases {
 		display0 = &lcd;
 		display1 = &tv0;
+		/delete-property/ mmc2;
+		/delete-property/ mmc3;
 	};
 
 	ldo_3v3: fixedregulator {
@@ -125,7 +127,7 @@
 			spi-cpol;
 			spi-cpha;
 
-			backlight= <&backlight>;
+			backlight = <&backlight>;
 			label = "lcd";
 			port {
 				lcd_in: endpoint {
diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi
index 99f5585097a1..219202610463 100644
--- a/arch/arm/boot/dts/omap3-igep.dtsi
+++ b/arch/arm/boot/dts/omap3-igep.dtsi
@@ -111,7 +111,7 @@
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		linux,mtd-name= "micron,mt29c4g96maz";
+		linux,mtd-name = "micron,mt29c4g96maz";
 		nand-bus-width = <16>;
 		gpmc,device-width = <2>;
 		ti,nand-ecc-opt = "bch8";
diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts
index 9c6a92724590..36fc8805e0c1 100644
--- a/arch/arm/boot/dts/omap3-ldp.dts
+++ b/arch/arm/boot/dts/omap3-ldp.dts
@@ -103,7 +103,7 @@
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		linux,mtd-name= "micron,nand";
+		linux,mtd-name = "micron,nand";
 		nand-bus-width = <16>;
 		gpmc,device-width = <2>;
 		ti,nand-ecc-opt = "bch8";
@@ -215,11 +215,11 @@
 };
 
 &mmc2 {
-	status="disabled";
+	status = "disabled";
 };
 
 &mmc3 {
-	status="disabled";
+	status = "disabled";
 };
 
 &omap3_pmx_core {
diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
index 73d477898ec2..c595afe4181d 100644
--- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
+++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
@@ -372,7 +372,7 @@
 		gpmc,device-width = <2>;
 		gpmc,wait-pin = <0>;
 		gpmc,wait-monitoring-ns = <0>;
-		gpmc,burst-length= <4>;
+		gpmc,burst-length = <4>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <100>;
 		gpmc,cs-wr-off-ns = <100>;
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index d40c3d2c4914..dd7971556449 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -568,8 +568,8 @@
 };
 
 &twl_gpio {
-	ti,pullups	= <0x0>;
-	ti,pulldowns	= <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */
+	ti,pullups = <0x0>;
+	ti,pulldowns = <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */
 };
 
 &i2c2 {
diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
index 7dde9fbb06d3..f68da828b050 100644
--- a/arch/arm/boot/dts/omap3-n950-n9.dtsi
+++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
@@ -162,8 +162,8 @@
 };
 
 &twl_gpio {
-	ti,pullups	= <0x000001>; /* BIT(0) */
-	ti,pulldowns	= <0x008106>; /* BIT(1) | BIT(2) | BIT(8) | BIT(15) */
+	ti,pullups = <0x000001>; /* BIT(0) */
+	ti,pulldowns = <0x008106>; /* BIT(1) | BIT(2) | BIT(8) | BIT(15) */
 };
 
 &vdac {
diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi
index 006a6d97231c..adc714c39825 100644
--- a/arch/arm/boot/dts/omap3-overo-base.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-base.dtsi
@@ -222,7 +222,7 @@
 
 	nand@0,0 {
 		compatible = "ti,omap2-nand";
-		linux,mtd-name= "micron,mt29c4g96maz";
+		linux,mtd-name = "micron,mt29c4g96maz";
 		reg = <0 0 4>;	/* CS0, offset 0, IO size 4 */
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi
index 37608af6c07f..559853764487 100644
--- a/arch/arm/boot/dts/omap3-pandora-common.dtsi
+++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi
@@ -666,7 +666,7 @@
 
 	lcd: lcd@1 {
 		reg = <1>;	/* CS1 */
-		compatible =	"tpo,td043mtea1";
+		compatible = "tpo,td043mtea1";
 		spi-max-frequency = <100000>;
 		spi-cpol;
 		spi-cpha;
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 64b7e6fddd1b..825075ff0e34 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for OMAP3 SoC
  *
  * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/bus/ti-sysc.h>
diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts
index 7d530ae3483b..258ecd9e4519 100644
--- a/arch/arm/boot/dts/omap3430-sdp.dts
+++ b/arch/arm/boot/dts/omap3430-sdp.dts
@@ -53,7 +53,7 @@
 
 	nor@0,0 {
 		compatible = "cfi-flash";
-		linux,mtd-name= "intel,pf48f6000m0y1be";
+		linux,mtd-name = "intel,pf48f6000m0y1be";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0 0 0x08000000>;
@@ -105,7 +105,7 @@
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		linux,mtd-name= "micron,mt29f1g08abb";
+		linux,mtd-name = "micron,mt29f1g08abb";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ti,nand-ecc-opt = "sw";
@@ -148,7 +148,7 @@
 	};
 
 	onenand@2,0 {
-		linux,mtd-name= "samsung,kfm2g16q2m-deb8";
+		linux,mtd-name = "samsung,kfm2g16q2m-deb8";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "ti,omap2-onenand";
diff --git a/arch/arm/boot/dts/omap3430es1-clocks.dtsi b/arch/arm/boot/dts/omap3430es1-clocks.dtsi
index 2ec3628d3315..24adfac26be0 100644
--- a/arch/arm/boot/dts/omap3430es1-clocks.dtsi
+++ b/arch/arm/boot/dts/omap3430es1-clocks.dtsi
@@ -46,37 +46,61 @@
 		ti,bit-shift = <2>;
 	};
 
-	d2d_26m_fck: d2d_26m_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&sys_ck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <3>;
-	};
-
-	fshostusb_fck: fshostusb_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <5>;
-	};
-
-	ssi_ssr_gate_fck_3430es1: ssi_ssr_gate_fck_3430es1@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&corex2_fck>;
-		ti,bit-shift = <0>;
-		reg = <0x0a00>;
-	};
-
-	ssi_ssr_div_fck_3430es1: ssi_ssr_div_fck_3430es1@a40 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&corex2_fck>;
-		ti,bit-shift = <8>;
-		reg = <0x0a40>;
-		ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
+	clock@a00 {
+		compatible = "ti,clksel";
+		reg = <0xa00>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		d2d_26m_fck: clock-d2d-26m-fck {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "d2d_26m_fck";
+			clocks = <&sys_ck>;
+			ti,bit-shift = <3>;
+		};
+
+		fshostusb_fck: clock-fshostusb-fck {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "fshostusb_fck";
+			clocks = <&core_48m_fck>;
+			ti,bit-shift = <5>;
+		};
+
+		ssi_ssr_gate_fck_3430es1: clock-ssi-ssr-gate-fck-3430es1 {
+			#clock-cells = <0>;
+			compatible = "ti,composite-no-wait-gate-clock";
+			clock-output-names = "ssi_ssr_gate_fck_3430es1";
+			clocks = <&corex2_fck>;
+			ti,bit-shift = <0>;
+		};
+	};
+
+	clock@a40 {
+		compatible = "ti,clksel";
+		reg = <0xa40>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		ssi_ssr_div_fck_3430es1: clock-ssi-ssr-div-fck-3430es1 {
+			#clock-cells = <0>;
+			compatible = "ti,composite-divider-clock";
+			clock-output-names = "ssi_ssr_div_fck_3430es1";
+			clocks = <&corex2_fck>;
+			ti,bit-shift = <8>;
+			ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
+		};
+
+		usb_l4_div_ick: clock-usb-l4-div-ick {
+			#clock-cells = <0>;
+			compatible = "ti,composite-divider-clock";
+			clock-output-names = "usb_l4_div_ick";
+			clocks = <&l4_ick>;
+			ti,bit-shift = <4>;
+			ti,max-div = <1>;
+			ti,index-starts-at-one;
+		};
 	};
 
 	ssi_ssr_fck: ssi_ssr_fck_3430es1 {
@@ -93,20 +117,43 @@
 		clock-div = <2>;
 	};
 
-	hsotgusb_ick_3430es1: hsotgusb_ick_3430es1@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-no-wait-interface-clock";
-		clocks = <&core_l3_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <4>;
-	};
-
-	fac_ick: fac_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <8>;
+	clock@a10 {
+		compatible = "ti,clksel";
+		reg = <0xa10>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		hsotgusb_ick_3430es1: clock-hsotgusb-ick-3430es1 {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-no-wait-interface-clock";
+			clock-output-names = "hsotgusb_ick_3430es1";
+			clocks = <&core_l3_ick>;
+			ti,bit-shift = <4>;
+		};
+
+		fac_ick: clock-fac-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "fac_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <8>;
+		};
+
+		ssi_ick: clock-ssi-ick-3430es1 {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-no-wait-interface-clock";
+			clock-output-names = "ssi_ick_3430es1";
+			clocks = <&ssi_l4_ick>;
+			ti,bit-shift = <0>;
+		};
+
+		usb_l4_gate_ick: clock-usb-l4-gate-ick {
+			#clock-cells = <0>;
+			compatible = "ti,composite-interface-clock";
+			clock-output-names = "usb_l4_gate_ick";
+			clocks = <&l4_ick>;
+			ti,bit-shift = <5>;
+		};
 	};
 
 	ssi_l4_ick: ssi_l4_ick {
@@ -117,45 +164,26 @@
 		clock-div = <1>;
 	};
 
-	ssi_ick: ssi_ick_3430es1@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-no-wait-interface-clock";
-		clocks = <&ssi_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <0>;
-	};
-
-	usb_l4_gate_ick: usb_l4_gate_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-interface-clock";
-		clocks = <&l4_ick>;
-		ti,bit-shift = <5>;
-		reg = <0x0a10>;
-	};
-
-	usb_l4_div_ick: usb_l4_div_ick@a40 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&l4_ick>;
-		ti,bit-shift = <4>;
-		ti,max-div = <1>;
-		reg = <0x0a40>;
-		ti,index-starts-at-one;
-	};
-
 	usb_l4_ick: usb_l4_ick {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
 		clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>;
 	};
 
-	dss1_alwon_fck: dss1_alwon_fck_3430es1@e00 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll4_m4x2_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0e00>;
-		ti,set-rate-parent;
+	clock@e00 {
+		compatible = "ti,clksel";
+		reg = <0xe00>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		dss1_alwon_fck: clock-dss1-alwon-fck-3430es1 {
+			#clock-cells = <0>;
+			compatible = "ti,gate-clock";
+			clock-output-names = "dss1_alwon_fck_3430es1";
+			clocks = <&dpll4_m4x2_ck>;
+			ti,bit-shift = <0>;
+			ti,set-rate-parent;
+		};
 	};
 
 	dss_ick: dss_ick_3430es1@e10 {
diff --git a/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi b/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi
index 21079cdf2663..8374532f20e2 100644
--- a/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi
@@ -13,45 +13,76 @@
 		clock-div = <1>;
 	};
 
-	aes1_ick: aes1_ick@a14 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&security_l4_ick2>;
-		ti,bit-shift = <3>;
-		reg = <0x0a14>;
-	};
+	clock@a14 {
+		compatible = "ti,clksel";
+		reg = <0xa14>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
 
-	rng_ick: rng_ick@a14 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&security_l4_ick2>;
-		reg = <0x0a14>;
-		ti,bit-shift = <2>;
-	};
+		aes1_ick: clock-aes1-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "aes1_ick";
+			clocks = <&security_l4_ick2>;
+			ti,bit-shift = <3>;
+		};
 
-	sha11_ick: sha11_ick@a14 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&security_l4_ick2>;
-		reg = <0x0a14>;
-		ti,bit-shift = <1>;
-	};
+		rng_ick: clock-rng-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "rng_ick";
+			clocks = <&security_l4_ick2>;
+			ti,bit-shift = <2>;
+		};
 
-	des1_ick: des1_ick@a14 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&security_l4_ick2>;
-		reg = <0x0a14>;
-		ti,bit-shift = <0>;
+		sha11_ick: clock-sha11-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "sha11_ick";
+			clocks = <&security_l4_ick2>;
+			ti,bit-shift = <1>;
+		};
+
+		des1_ick: clock-des1-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "des1_ick";
+			clocks = <&security_l4_ick2>;
+			ti,bit-shift = <0>;
+		};
+
+		pka_ick: clock-pka-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "pka_ick";
+			clocks = <&security_l3_ick>;
+			ti,bit-shift = <4>;
+		};
 	};
 
-	cam_mclk: cam_mclk@f00 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll4_m5x2_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0f00>;
-		ti,set-rate-parent;
+	/* CM_FCLKEN_CAM */
+	clock@f00 {
+		compatible = "ti,clksel";
+		reg = <0xf00>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		cam_mclk: clock-cam-mclk {
+			#clock-cells = <0>;
+			compatible = "ti,gate-clock";
+			clock-output-names = "cam_mclk";
+			clocks = <&dpll4_m5x2_ck>;
+			ti,bit-shift = <0>;
+			ti,set-rate-parent;
+		};
+
+		csi2_96m_fck: clock-csi2-96m-fck {
+			#clock-cells = <0>;
+			compatible = "ti,gate-clock";
+			clock-output-names = "csi2_96m_fck";
+			clocks = <&core_96m_fck>;
+			ti,bit-shift = <1>;
+		};
 	};
 
 	cam_ick: cam_ick@f10 {
@@ -62,14 +93,6 @@
 		ti,bit-shift = <0>;
 	};
 
-	csi2_96m_fck: csi2_96m_fck@f00 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&core_96m_fck>;
-		reg = <0x0f00>;
-		ti,bit-shift = <1>;
-	};
-
 	security_l3_ick: security_l3_ick {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
@@ -78,44 +101,51 @@
 		clock-div = <1>;
 	};
 
-	pka_ick: pka_ick@a14 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&security_l3_ick>;
-		reg = <0x0a14>;
-		ti,bit-shift = <4>;
-	};
+	clock@a10 {
+		compatible = "ti,clksel";
+		reg = <0xa10>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
 
-	icr_ick: icr_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <29>;
-	};
+		icr_ick: clock-icr-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "icr_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <29>;
+		};
 
-	des2_ick: des2_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <26>;
-	};
+		des2_ick: clock-des2-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "des2_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <26>;
+		};
 
-	mspro_ick: mspro_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <23>;
-	};
+		mspro_ick: clock-mspro-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "mspro_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <23>;
+		};
 
-	mailboxes_ick: mailboxes_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <7>;
+		mailboxes_ick: clock-mailboxes-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "mailboxes_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <7>;
+		};
+
+		sad2d_ick: clock-sad2d-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "sad2d_ick";
+			clocks = <&l3_ick>;
+			ti,bit-shift = <3>;
+		};
 	};
 
 	ssi_l4_ick: ssi_l4_ick {
@@ -126,20 +156,27 @@
 		clock-div = <1>;
 	};
 
-	sr1_fck: sr1_fck@c00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&sys_ck>;
-		reg = <0x0c00>;
-		ti,bit-shift = <6>;
-	};
+	clock@c00 {
+		compatible = "ti,clksel";
+		reg = <0xc00>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
 
-	sr2_fck: sr2_fck@c00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&sys_ck>;
-		reg = <0x0c00>;
-		ti,bit-shift = <7>;
+		sr1_fck: clock-sr1-fck {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "sr1_fck";
+			clocks = <&sys_ck>;
+			ti,bit-shift = <6>;
+		};
+
+		sr2_fck: clock-sr2-fck {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "sr2_fck";
+			clocks = <&sys_ck>;
+			ti,bit-shift = <7>;
+		};
 	};
 
 	sr_l4_ick: sr_l4_ick {
@@ -187,37 +224,45 @@
 		ti,bit-shift = <0>;
 	};
 
-	modem_fck: modem_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&sys_ck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <31>;
-	};
+	clock@a00 {
+		compatible = "ti,clksel";
+		reg = <0xa00>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
 
-	sad2d_ick: sad2d_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l3_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <3>;
-	};
+		modem_fck: clock-modem-fck {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "modem_fck";
+			clocks = <&sys_ck>;
+			ti,bit-shift = <31>;
+		};
 
-	mad2d_ick: mad2d_ick@a18 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l3_ick>;
-		reg = <0x0a18>;
-		ti,bit-shift = <3>;
+		mspro_fck: clock-mspro-fck {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "mspro_fck";
+			clocks = <&core_96m_fck>;
+			ti,bit-shift = <23>;
+		};
 	};
 
-	mspro_fck: mspro_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_96m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <23>;
+	/* CM_ICLKEN3_CORE */
+	clock@a18 {
+		compatible = "ti,clksel";
+		reg = <0xa18>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		mad2d_ick: clock-mad2d-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "mad2d_ick";
+			clocks = <&l3_ick>;
+			ti,bit-shift = <3>;
+		};
 	};
+
 };
 
 &cm_clockdomains {
diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi
index 8b8451399784..2eb73ae7ef3e 100644
--- a/arch/arm/boot/dts/omap34xx.dtsi
+++ b/arch/arm/boot/dts/omap34xx.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for OMAP34xx/OMAP35xx SoC
  *
  * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/bus/ti-sysc.h>
diff --git a/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi b/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
index 9974d5226971..dcc5cfcd1fe6 100644
--- a/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
+++ b/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
@@ -133,37 +133,66 @@
 		ti,bit-shift = <2>;
 	};
 
-	usbtll_ick: usbtll_ick@a18 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a18>;
-		ti,bit-shift = <2>;
+	/* CM_ICLKEN3_CORE */
+	clock@a18 {
+		compatible = "ti,clksel";
+		reg = <0xa18>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		usbtll_ick: clock-usbtll-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "usbtll_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <2>;
+		};
 	};
 
-	mmchs3_ick: mmchs3_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <30>;
+	clock@a10 {
+		compatible = "ti,clksel";
+		reg = <0xa10>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		mmchs3_ick: clock-mmchs3-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "mmchs3_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <30>;
+		};
 	};
 
-	mmchs3_fck: mmchs3_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_96m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <30>;
+	clock@a00 {
+		compatible = "ti,clksel";
+		reg = <0xa00>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		mmchs3_fck: clock-mmchs3-fck {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "mmchs3_fck";
+			clocks = <&core_96m_fck>;
+			ti,bit-shift = <30>;
+		};
 	};
 
-	dss1_alwon_fck: dss1_alwon_fck_3430es2@e00 {
-		#clock-cells = <0>;
-		compatible = "ti,dss-gate-clock";
-		clocks = <&dpll4_m4x2_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0e00>;
-		ti,set-rate-parent;
+	clock@e00 {
+		compatible = "ti,clksel";
+		reg = <0xe00>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		dss1_alwon_fck: clock-dss1-alwon-fck-3430es2 {
+			#clock-cells = <0>;
+			compatible = "ti,dss-gate-clock";
+			clock-output-names = "dss1_alwon_fck_3430es2";
+			clocks = <&dpll4_m4x2_ck>;
+			ti,bit-shift = <0>;
+			ti,set-rate-parent;
+		};
 	};
 
 	dss_ick: dss_ick_3430es2@e10 {
diff --git a/arch/arm/boot/dts/omap36xx-clocks.dtsi b/arch/arm/boot/dts/omap36xx-clocks.dtsi
index 4e9cc9003594..c5fdb2bd765d 100644
--- a/arch/arm/boot/dts/omap36xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap36xx-clocks.dtsi
@@ -58,12 +58,19 @@
 		ti,set-bit-to-disable;
 	};
 
-	uart4_fck: uart4_fck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&per_48m_fck>;
+	clock@1000 {
+		compatible = "ti,clksel";
 		reg = <0x1000>;
-		ti,bit-shift = <18>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		uart4_fck: clock-uart4-fck {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "uart4_fck";
+			clocks = <&per_48m_fck>;
+			ti,bit-shift = <18>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi b/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi
index 945537aee3ca..c94eb86d3da7 100644
--- a/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi
+++ b/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi
@@ -5,21 +5,35 @@
  * Copyright (C) 2013 Texas Instruments, Inc.
  */
 &cm_clocks {
-	ssi_ssr_gate_fck_3430es2: ssi_ssr_gate_fck_3430es2@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&corex2_fck>;
-		ti,bit-shift = <0>;
-		reg = <0x0a00>;
-	};
-
-	ssi_ssr_div_fck_3430es2: ssi_ssr_div_fck_3430es2@a40 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&corex2_fck>;
-		ti,bit-shift = <8>;
-		reg = <0x0a40>;
-		ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
+	clock@a00 {
+		compatible = "ti,clksel";
+		reg = <0xa00>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		ssi_ssr_gate_fck_3430es2: clock-ssi-ssr-gate-fck-3430es2 {
+			#clock-cells = <0>;
+			compatible = "ti,composite-no-wait-gate-clock";
+			clock-output-names = "ssi_ssr_gate_fck_3430es2";
+			clocks = <&corex2_fck>;
+			ti,bit-shift = <0>;
+		};
+	};
+
+	clock@a40 {
+		compatible = "ti,clksel";
+		reg = <0xa40>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		ssi_ssr_div_fck_3430es2: clock-ssi-ssr-div-fck-3430es2 {
+			#clock-cells = <0>;
+			compatible = "ti,composite-divider-clock";
+			clock-output-names = "ssi_ssr_div_fck_3430es2";
+			clocks = <&corex2_fck>;
+			ti,bit-shift = <8>;
+			ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
+		};
 	};
 
 	ssi_ssr_fck: ssi_ssr_fck_3430es2 {
@@ -36,12 +50,27 @@
 		clock-div = <2>;
 	};
 
-	hsotgusb_ick_3430es2: hsotgusb_ick_3430es2@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-hsotgusb-interface-clock";
-		clocks = <&core_l3_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <4>;
+	clock@a10 {
+		compatible = "ti,clksel";
+		reg = <0xa10>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		hsotgusb_ick_3430es2: clock-hsotgusb-ick-3430es2 {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-hsotgusb-interface-clock";
+			clock-output-names = "hsotgusb_ick_3430es2";
+			clocks = <&core_l3_ick>;
+			ti,bit-shift = <4>;
+		};
+
+		ssi_ick: clock-ssi-ick-3430es2 {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-ssi-interface-clock";
+			clock-output-names = "ssi_ick_3430es2";
+			clocks = <&ssi_l4_ick>;
+			ti,bit-shift = <0>;
+		};
 	};
 
 	ssi_l4_ick: ssi_l4_ick {
@@ -52,20 +81,19 @@
 		clock-div = <1>;
 	};
 
-	ssi_ick: ssi_ick_3430es2@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-ssi-interface-clock";
-		clocks = <&ssi_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <0>;
-	};
+	clock@c00 {
+		compatible = "ti,clksel";
+		reg = <0xc00>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
 
-	usim_gate_fck: usim_gate_fck@c00 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&omap_96m_fck>;
-		ti,bit-shift = <9>;
-		reg = <0x0c00>;
+		usim_gate_fck: clock-usim-gate-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-gate-clock";
+			clock-output-names = "usim_gate_fck";
+			clocks = <&omap_96m_fck>;
+			ti,bit-shift = <9>;
+		};
 	};
 
 	sys_d2_ck: sys_d2_ck {
@@ -140,13 +168,20 @@
 		clock-div = <20>;
 	};
 
-	usim_mux_fck: usim_mux_fck@c40 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&sys_ck>, <&sys_d2_ck>, <&omap_96m_d2_fck>, <&omap_96m_d4_fck>, <&omap_96m_d8_fck>, <&omap_96m_d10_fck>, <&dpll5_m2_d4_ck>, <&dpll5_m2_d8_ck>, <&dpll5_m2_d16_ck>, <&dpll5_m2_d20_ck>;
-		ti,bit-shift = <3>;
-		reg = <0x0c40>;
-		ti,index-starts-at-one;
+	clock@c40 {
+		compatible = "ti,clksel";
+		reg = <0xc40>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		usim_mux_fck: clock-usim-mux-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-mux-clock";
+			clock-output-names = "usim_mux_fck";
+			clocks = <&sys_ck>, <&sys_d2_ck>, <&omap_96m_d2_fck>, <&omap_96m_d4_fck>, <&omap_96m_d8_fck>, <&omap_96m_d10_fck>, <&dpll5_m2_d4_ck>, <&dpll5_m2_d8_ck>, <&dpll5_m2_d16_ck>, <&dpll5_m2_d20_ck>;
+			ti,bit-shift = <3>;
+			ti,index-starts-at-one;
+		};
 	};
 
 	usim_fck: usim_fck {
@@ -155,12 +190,19 @@
 		clocks = <&usim_gate_fck>, <&usim_mux_fck>;
 	};
 
-	usim_ick: usim_ick@c10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&wkup_l4_ick>;
-		reg = <0x0c10>;
-		ti,bit-shift = <9>;
+	clock@c10 {
+		compatible = "ti,clksel";
+		reg = <0xc10>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		usim_ick: clock-usim-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "usim_ick";
+			clocks = <&wkup_l4_ick>;
+			ti,bit-shift = <9>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
index 22b33098b1a2..32ac7924a130 100644
--- a/arch/arm/boot/dts/omap36xx.dtsi
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for OMAP3 SoC
  *
  * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/bus/ti-sysc.h>
diff --git a/arch/arm/boot/dts/omap3xxx-clocks.dtsi b/arch/arm/boot/dts/omap3xxx-clocks.dtsi
index 0656c32439d2..2e13ca11ceea 100644
--- a/arch/arm/boot/dts/omap3xxx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap3xxx-clocks.dtsi
@@ -78,12 +78,35 @@
 };
 
 &scm_clocks {
-	mcbsp5_mux_fck: mcbsp5_mux_fck@68 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&core_96m_fck>, <&mcbsp_clks>;
-		ti,bit-shift = <4>;
+	/* CONTROL_DEVCONF1 */
+	clock@68 {
+		compatible = "ti,clksel";
 		reg = <0x68>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		mcbsp5_mux_fck: clock-mcbsp5-mux-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-mux-clock";
+			clock-output-names = "mcbsp5_mux_fck";
+			clocks = <&core_96m_fck>, <&mcbsp_clks>;
+			ti,bit-shift = <4>;
+		};
+
+		mcbsp3_mux_fck: clock-mcbsp3-mux-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-mux-clock";
+			clock-output-names = "mcbsp3_mux_fck";
+			clocks = <&per_96m_fck>, <&mcbsp_clks>;
+		};
+
+		mcbsp4_mux_fck: clock-mcbsp4-mux-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-mux-clock";
+			clock-output-names = "mcbsp4_mux_fck";
+			clocks = <&per_96m_fck>, <&mcbsp_clks>;
+			ti,bit-shift = <2>;
+		};
 	};
 
 	mcbsp5_fck: mcbsp5_fck {
@@ -92,12 +115,28 @@
 		clocks = <&mcbsp5_gate_fck>, <&mcbsp5_mux_fck>;
 	};
 
-	mcbsp1_mux_fck: mcbsp1_mux_fck@4 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&core_96m_fck>, <&mcbsp_clks>;
-		ti,bit-shift = <2>;
-		reg = <0x04>;
+	/* CONTROL_DEVCONF0 */
+	clock@4 {
+		compatible = "ti,clksel";
+		reg = <0x4>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		mcbsp1_mux_fck: clock-mcbsp1-mux-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-mux-clock";
+			clock-output-names = "mcbsp1_mux_fck";
+			clocks = <&core_96m_fck>, <&mcbsp_clks>;
+			ti,bit-shift = <2>;
+		};
+
+		mcbsp2_mux_fck: clock-mcbsp2-mux-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-mux-clock";
+			clock-output-names = "mcbsp2_mux_fck";
+			clocks = <&per_96m_fck>, <&mcbsp_clks>;
+			ti,bit-shift = <6>;
+		};
 	};
 
 	mcbsp1_fck: mcbsp1_fck {
@@ -106,41 +145,18 @@
 		clocks = <&mcbsp1_gate_fck>, <&mcbsp1_mux_fck>;
 	};
 
-	mcbsp2_mux_fck: mcbsp2_mux_fck@4 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&per_96m_fck>, <&mcbsp_clks>;
-		ti,bit-shift = <6>;
-		reg = <0x04>;
-	};
-
 	mcbsp2_fck: mcbsp2_fck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
 		clocks = <&mcbsp2_gate_fck>, <&mcbsp2_mux_fck>;
 	};
 
-	mcbsp3_mux_fck: mcbsp3_mux_fck@68 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&per_96m_fck>, <&mcbsp_clks>;
-		reg = <0x68>;
-	};
-
 	mcbsp3_fck: mcbsp3_fck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
 		clocks = <&mcbsp3_gate_fck>, <&mcbsp3_mux_fck>;
 	};
 
-	mcbsp4_mux_fck: mcbsp4_mux_fck@68 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&per_96m_fck>, <&mcbsp_clks>;
-		ti,bit-shift = <2>;
-		reg = <0x68>;
-	};
-
 	mcbsp4_fck: mcbsp4_fck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
@@ -238,14 +254,87 @@
 		reg = <0x0d00>, <0x0d20>, <0x0d40>, <0x0d30>;
 	};
 
-	dpll3_m3_ck: dpll3_m3_ck@1140 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll3_ck>;
-		ti,bit-shift = <16>;
-		ti,max-div = <31>;
+	/* CM_CLKSEL1_EMU */
+	clock@1140 {
+		compatible = "ti,clksel";
 		reg = <0x1140>;
-		ti,index-starts-at-one;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		dpll3_m3_ck: clock-dpll3-m3 {
+			#clock-cells = <0>;
+			compatible = "ti,divider-clock";
+			clock-output-names = "dpll3_m3_ck";
+			clocks = <&dpll3_ck>;
+			ti,bit-shift = <16>;
+			ti,max-div = <31>;
+			ti,index-starts-at-one;
+		};
+
+		dpll4_m6_ck: clock-dpll4-m6 {
+			#clock-cells = <0>;
+			compatible = "ti,divider-clock";
+			clock-output-names = "dpll4_m6_ck";
+			clocks = <&dpll4_ck>;
+			ti,bit-shift = <24>;
+			ti,max-div = <63>;
+			ti,index-starts-at-one;
+		};
+
+		emu_src_mux_ck: clock-emu-src-mux {
+			#clock-cells = <0>;
+			compatible = "ti,mux-clock";
+			clock-output-names = "emu_src_mux_ck";
+			clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>;
+		};
+
+		pclk_fck: clock-pclk-fck {
+			#clock-cells = <0>;
+			compatible = "ti,divider-clock";
+			clock-output-names = "pclk_fck";
+			clocks = <&emu_src_ck>;
+			ti,bit-shift = <8>;
+			ti,max-div = <7>;
+			ti,index-starts-at-one;
+		};
+
+		pclkx2_fck: clock-pclkx2-fck {
+			#clock-cells = <0>;
+			compatible = "ti,divider-clock";
+			clock-output-names = "pclkx2_fck";
+			clocks = <&emu_src_ck>;
+			ti,bit-shift = <6>;
+			ti,max-div = <3>;
+			ti,index-starts-at-one;
+		};
+
+		atclk_fck: clock-atclk-fck {
+			#clock-cells = <0>;
+			compatible = "ti,divider-clock";
+			clock-output-names = "atclk_fck";
+			clocks = <&emu_src_ck>;
+			ti,bit-shift = <4>;
+			ti,max-div = <3>;
+			ti,index-starts-at-one;
+		};
+
+		traceclk_src_fck: clock-traceclk-src-fck {
+			#clock-cells = <0>;
+			compatible = "ti,mux-clock";
+			clock-output-names = "traceclk_src_fck";
+			clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>;
+			ti,bit-shift = <2>;
+		};
+
+		traceclk_fck: clock-traceclk-fck {
+			#clock-cells = <0>;
+			compatible = "ti,divider-clock";
+			clock-output-names = "traceclk_fck";
+			clocks = <&traceclk_src_fck>;
+			ti,bit-shift = <11>;
+			ti,max-div = <7>;
+			ti,index-starts-at-one;
+		};
 	};
 
 	dpll3_m3x2_mul_ck: dpll3_m3x2_mul_ck {
@@ -285,16 +374,6 @@
 		clock-frequency = <0x0>;
 	};
 
-	dpll3_m2_ck: dpll3_m2_ck@d40 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll3_ck>;
-		ti,bit-shift = <27>;
-		ti,max-div = <31>;
-		reg = <0x0d40>;
-		ti,index-starts-at-one;
-	};
-
 	core_ck: core_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
@@ -345,22 +424,73 @@
 		clock-div = <1>;
 	};
 
-	omap_96m_fck: omap_96m_fck@d40 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&cm_96m_fck>, <&sys_ck>;
-		ti,bit-shift = <6>;
-		reg = <0x0d40>;
-	};
-
-	dpll4_m3_ck: dpll4_m3_ck@e40 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll4_ck>;
-		ti,bit-shift = <8>;
-		ti,max-div = <32>;
-		reg = <0x0e40>;
-		ti,index-starts-at-one;
+	/* CM_CLKSEL1_PLL */
+	clock@d40 {
+		compatible = "ti,clksel";
+		reg = <0xd40>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		dpll3_m2_ck: clock-dpll3-m2 {
+			#clock-cells = <0>;
+			compatible = "ti,divider-clock";
+			clock-output-names = "dpll3_m2_ck";
+			clocks = <&dpll3_ck>;
+			ti,bit-shift = <27>;
+			ti,max-div = <31>;
+			ti,index-starts-at-one;
+		};
+
+		omap_96m_fck: clock-omap-96m-fck {
+			#clock-cells = <0>;
+			compatible = "ti,mux-clock";
+			clock-output-names = "omap_96m_fck";
+			clocks = <&cm_96m_fck>, <&sys_ck>;
+			ti,bit-shift = <6>;
+		};
+
+		omap_54m_fck: clock-omap-54m-fck {
+			#clock-cells = <0>;
+			compatible = "ti,mux-clock";
+			clock-output-names = "omap_54m_fck";
+			clocks = <&dpll4_m3x2_ck>, <&sys_altclk>;
+			ti,bit-shift = <5>;
+		};
+
+		omap_48m_fck: clock-omap-48m-fck {
+			#clock-cells = <0>;
+			compatible = "ti,mux-clock";
+			clock-output-names = "omap_48m_fck";
+			clocks = <&cm_96m_d2_fck>, <&sys_altclk>;
+			ti,bit-shift = <3>;
+		};
+	};
+
+	/* CM_CLKSEL_DSS */
+	clock@e40 {
+		compatible = "ti,clksel";
+		reg = <0xe40>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		dpll4_m3_ck: clock-dpll4-m3 {
+			#clock-cells = <0>;
+			compatible = "ti,divider-clock";
+			clock-output-names = "dpll4_m3_ck";
+			clocks = <&dpll4_ck>;
+			ti,bit-shift = <8>;
+			ti,max-div = <32>;
+			ti,index-starts-at-one;
+		};
+
+		dpll4_m4_ck: clock-dpll4-m4 {
+			#clock-cells = <0>;
+			compatible = "ti,divider-clock";
+			clock-output-names = "dpll4_m4_ck";
+			clocks = <&dpll4_ck>;
+			ti,max-div = <16>;
+			ti,index-starts-at-one;
+		};
 	};
 
 	dpll4_m3x2_mul_ck: dpll4_m3x2_mul_ck {
@@ -380,14 +510,6 @@
 		ti,set-bit-to-disable;
 	};
 
-	omap_54m_fck: omap_54m_fck@d40 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll4_m3x2_ck>, <&sys_altclk>;
-		ti,bit-shift = <5>;
-		reg = <0x0d40>;
-	};
-
 	cm_96m_d2_fck: cm_96m_d2_fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
@@ -396,14 +518,6 @@
 		clock-div = <2>;
 	};
 
-	omap_48m_fck: omap_48m_fck@d40 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&cm_96m_d2_fck>, <&sys_altclk>;
-		ti,bit-shift = <3>;
-		reg = <0x0d40>;
-	};
-
 	omap_12m_fck: omap_12m_fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
@@ -412,15 +526,6 @@
 		clock-div = <4>;
 	};
 
-	dpll4_m4_ck: dpll4_m4_ck@e40 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll4_ck>;
-		ti,max-div = <16>;
-		reg = <0x0e40>;
-		ti,index-starts-at-one;
-	};
-
 	dpll4_m4x2_mul_ck: dpll4_m4x2_mul_ck {
 		#clock-cells = <0>;
 		compatible = "ti,fixed-factor-clock";
@@ -468,16 +573,6 @@
 		ti,set-rate-parent;
 	};
 
-	dpll4_m6_ck: dpll4_m6_ck@1140 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll4_ck>;
-		ti,bit-shift = <24>;
-		ti,max-div = <63>;
-		reg = <0x1140>;
-		ti,index-starts-at-one;
-	};
-
 	dpll4_m6x2_mul_ck: dpll4_m6x2_mul_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
@@ -503,19 +598,37 @@
 		clock-div = <1>;
 	};
 
-	clkout2_src_gate_ck: clkout2_src_gate_ck@d70 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x0d70>;
-	};
-
-	clkout2_src_mux_ck: clkout2_src_mux_ck@d70 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&core_ck>, <&sys_ck>, <&cm_96m_fck>, <&omap_54m_fck>;
-		reg = <0x0d70>;
+	/* CM_CLKOUT_CTRL */
+	clock@d70 {
+		compatible = "ti,clksel";
+		reg = <0xd70>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		clkout2_src_gate_ck: clock-clkout2-src-gate {
+			#clock-cells = <0>;
+			compatible = "ti,composite-no-wait-gate-clock";
+			clock-output-names = "clkout2_src_gate_ck";
+			clocks = <&core_ck>;
+			ti,bit-shift = <7>;
+		};
+
+		clkout2_src_mux_ck: clock-clkout2-src-mux {
+			#clock-cells = <0>;
+			compatible = "ti,composite-mux-clock";
+			clock-output-names = "clkout2_src_mux_ck";
+			clocks = <&core_ck>, <&sys_ck>, <&cm_96m_fck>, <&omap_54m_fck>;
+		};
+
+		sys_clkout2: clock-sys-clkout2 {
+			#clock-cells = <0>;
+			compatible = "ti,divider-clock";
+			clock-output-names = "sys_clkout2";
+			clocks = <&clkout2_src_ck>;
+			ti,bit-shift = <3>;
+			ti,max-div = <64>;
+			ti,index-power-of-two;
+		};
 	};
 
 	clkout2_src_ck: clkout2_src_ck {
@@ -524,16 +637,6 @@
 		clocks = <&clkout2_src_gate_ck>, <&clkout2_src_mux_ck>;
 	};
 
-	sys_clkout2: sys_clkout2@d70 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&clkout2_src_ck>;
-		ti,bit-shift = <3>;
-		ti,max-div = <64>;
-		reg = <0x0d70>;
-		ti,index-power-of-two;
-	};
-
 	mpu_ck: mpu_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
@@ -558,49 +661,208 @@
 		clock-div = <1>;
 	};
 
-	l3_ick: l3_ick@a40 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&core_ck>;
-		ti,max-div = <3>;
-		reg = <0x0a40>;
-		ti,index-starts-at-one;
-	};
-
-	l4_ick: l4_ick@a40 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&l3_ick>;
-		ti,bit-shift = <2>;
-		ti,max-div = <3>;
-		reg = <0x0a40>;
-		ti,index-starts-at-one;
-	};
-
-	rm_ick: rm_ick@c40 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&l4_ick>;
-		ti,bit-shift = <1>;
-		ti,max-div = <3>;
-		reg = <0x0c40>;
-		ti,index-starts-at-one;
-	};
-
-	gpt10_gate_fck: gpt10_gate_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <11>;
-		reg = <0x0a00>;
-	};
-
-	gpt10_mux_fck: gpt10_mux_fck@a40 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <6>;
-		reg = <0x0a40>;
+	/* CM_CLKSEL_CORE */
+	clock@a40 {
+		compatible = "ti,clksel";
+		reg = <0xa40>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		l3_ick: clock-l3-ick {
+			#clock-cells = <0>;
+			compatible = "ti,divider-clock";
+			clock-output-names = "l3_ick";
+			clocks = <&core_ck>;
+			ti,max-div = <3>;
+			ti,index-starts-at-one;
+		};
+
+		l4_ick: clock-l4-ick {
+			#clock-cells = <0>;
+			compatible = "ti,divider-clock";
+			clock-output-names = "l4_ick";
+			clocks = <&l3_ick>;
+			ti,bit-shift = <2>;
+			ti,max-div = <3>;
+			ti,index-starts-at-one;
+		};
+
+		gpt10_mux_fck: clock-gpt10-mux-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-mux-clock";
+			clock-output-names = "gpt10_mux_fck";
+			clocks = <&omap_32k_fck>, <&sys_ck>;
+			ti,bit-shift = <6>;
+		};
+
+		gpt11_mux_fck: clock-gpt11-mux-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-mux-clock";
+			clock-output-names = "gpt11_mux_fck";
+			clocks = <&omap_32k_fck>, <&sys_ck>;
+			ti,bit-shift = <7>;
+		};
+	};
+
+	/* CM_CLKSEL_WKUP */
+	clock@c40 {
+		compatible = "ti,clksel";
+		reg = <0xc40>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		rm_ick: clock-rm-ick {
+			#clock-cells = <0>;
+			compatible = "ti,divider-clock";
+			clock-output-names = "rm_ick";
+			clocks = <&l4_ick>;
+			ti,bit-shift = <1>;
+			ti,max-div = <3>;
+			ti,index-starts-at-one;
+		};
+
+		gpt1_mux_fck: clock-gpt1-mux-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-mux-clock";
+			clock-output-names = "gpt1_mux_fck";
+			clocks = <&omap_32k_fck>, <&sys_ck>;
+		};
+	};
+
+	/* CM_FCLKEN1_CORE */
+	clock@a00 {
+		compatible = "ti,clksel";
+		reg = <0xa00>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		gpt10_gate_fck: clock-gpt10-gate-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-gate-clock";
+			clock-output-names = "gpt10_gate_fck";
+			clocks = <&sys_ck>;
+			ti,bit-shift = <11>;
+		};
+
+		gpt11_gate_fck: clock-gpt11-gate-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-gate-clock";
+			clock-output-names = "gpt11_gate_fck";
+			clocks = <&sys_ck>;
+			ti,bit-shift = <12>;
+		};
+
+		mmchs2_fck: clock-mmchs2-fck {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "mmchs2_fck";
+			clocks = <&core_96m_fck>;
+			ti,bit-shift = <25>;
+		};
+
+		mmchs1_fck: clock-mmchs1-fck {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "mmchs1_fck";
+			clocks = <&core_96m_fck>;
+			ti,bit-shift = <24>;
+		};
+
+		i2c3_fck: clock-i2c3-fck {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "i2c3_fck";
+			clocks = <&core_96m_fck>;
+			ti,bit-shift = <17>;
+		};
+
+		i2c2_fck: clock-i2c2-fck {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "i2c2_fck";
+			clocks = <&core_96m_fck>;
+			ti,bit-shift = <16>;
+		};
+
+		i2c1_fck: clock-i2c1-fck {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "i2c1_fck";
+			clocks = <&core_96m_fck>;
+			ti,bit-shift = <15>;
+		};
+
+		mcbsp5_gate_fck: clock-mcbsp5-gate-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-gate-clock";
+			clock-output-names = "mcbsp5_gate_fck";
+			clocks = <&mcbsp_clks>;
+			ti,bit-shift = <10>;
+		};
+
+		mcbsp1_gate_fck: clock-mcbsp1-gate-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-gate-clock";
+			clock-output-names = "mcbsp1_gate_fck";
+			clocks = <&mcbsp_clks>;
+			ti,bit-shift = <9>;
+		};
+
+		mcspi4_fck: clock-mcspi4-fck {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "mcspi4_fck";
+			clocks = <&core_48m_fck>;
+			ti,bit-shift = <21>;
+		};
+
+		mcspi3_fck: clock-mcspi3-fck {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "mcspi3_fck";
+			clocks = <&core_48m_fck>;
+			ti,bit-shift = <20>;
+		};
+
+		mcspi2_fck: clock-mcspi2-fck {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "mcspi2_fck";
+			clocks = <&core_48m_fck>;
+			ti,bit-shift = <19>;
+		};
+
+		mcspi1_fck: clock-mcspi1-fck {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "mcspi1_fck";
+			clocks = <&core_48m_fck>;
+			ti,bit-shift = <18>;
+		};
+
+		uart2_fck: clock-uart2-fck {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "uart2_fck";
+			clocks = <&core_48m_fck>;
+			ti,bit-shift = <14>;
+		};
+
+		uart1_fck: clock-uart1-fck {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "uart1_fck";
+			clocks = <&core_48m_fck>;
+			ti,bit-shift = <13>;
+		};
+
+		hdq_fck: clock-hdq-fck {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "hdq_fck";
+			clocks = <&core_12m_fck>;
+			ti,bit-shift = <22>;
+		};
 	};
 
 	gpt10_fck: gpt10_fck {
@@ -609,22 +871,6 @@
 		clocks = <&gpt10_gate_fck>, <&gpt10_mux_fck>;
 	};
 
-	gpt11_gate_fck: gpt11_gate_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <12>;
-		reg = <0x0a00>;
-	};
-
-	gpt11_mux_fck: gpt11_mux_fck@a40 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x0a40>;
-	};
-
 	gpt11_fck: gpt11_fck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
@@ -639,62 +885,6 @@
 		clock-div = <1>;
 	};
 
-	mmchs2_fck: mmchs2_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_96m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <25>;
-	};
-
-	mmchs1_fck: mmchs1_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_96m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <24>;
-	};
-
-	i2c3_fck: i2c3_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_96m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <17>;
-	};
-
-	i2c2_fck: i2c2_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_96m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <16>;
-	};
-
-	i2c1_fck: i2c1_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_96m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <15>;
-	};
-
-	mcbsp5_gate_fck: mcbsp5_gate_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&mcbsp_clks>;
-		ti,bit-shift = <10>;
-		reg = <0x0a00>;
-	};
-
-	mcbsp1_gate_fck: mcbsp1_gate_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&mcbsp_clks>;
-		ti,bit-shift = <9>;
-		reg = <0x0a00>;
-	};
-
 	core_48m_fck: core_48m_fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
@@ -703,54 +893,6 @@
 		clock-div = <1>;
 	};
 
-	mcspi4_fck: mcspi4_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <21>;
-	};
-
-	mcspi3_fck: mcspi3_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <20>;
-	};
-
-	mcspi2_fck: mcspi2_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <19>;
-	};
-
-	mcspi1_fck: mcspi1_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <18>;
-	};
-
-	uart2_fck: uart2_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <14>;
-	};
-
-	uart1_fck: uart1_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <13>;
-	};
-
 	core_12m_fck: core_12m_fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
@@ -759,14 +901,6 @@
 		clock-div = <1>;
 	};
 
-	hdq_fck: hdq_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_12m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <22>;
-	};
-
 	core_l3_ick: core_l3_ick {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
@@ -775,12 +909,172 @@
 		clock-div = <1>;
 	};
 
-	sdrc_ick: sdrc_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_l3_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <1>;
+	/* CM_ICLKEN1_CORE */
+	clock@a10 {
+		compatible = "ti,clksel";
+		reg = <0xa10>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		sdrc_ick: clock-sdrc-ick {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "sdrc_ick";
+			clocks = <&core_l3_ick>;
+			ti,bit-shift = <1>;
+		};
+
+		mmchs2_ick: clock-mmchs2-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "mmchs2_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <25>;
+		};
+
+		mmchs1_ick: clock-mmchs1-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "mmchs1_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <24>;
+		};
+
+		hdq_ick: clock-hdq-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "hdq_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <22>;
+		};
+
+		mcspi4_ick: clock-mcspi4-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "mcspi4_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <21>;
+		};
+
+		mcspi3_ick: clock-mcspi3-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "mcspi3_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <20>;
+		};
+
+		mcspi2_ick: clock-mcspi2-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "mcspi2_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <19>;
+		};
+
+		mcspi1_ick: clock-mcspi1-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "mcspi1_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <18>;
+		};
+
+		i2c3_ick: clock-i2c3-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "i2c3_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <17>;
+		};
+
+		i2c2_ick: clock-i2c2-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "i2c2_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <16>;
+		};
+
+		i2c1_ick: clock-i2c1-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "i2c1_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <15>;
+		};
+
+		uart2_ick: clock-uart2-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "uart2_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <14>;
+		};
+
+		uart1_ick: clock-uart1-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "uart1_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <13>;
+		};
+
+		gpt11_ick: clock-gpt11-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "gpt11_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <12>;
+		};
+
+		gpt10_ick: clock-gpt10-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "gpt10_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <11>;
+		};
+
+		mcbsp5_ick: clock-mcbsp5-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "mcbsp5_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <10>;
+		};
+
+		mcbsp1_ick: clock-mcbsp1-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "mcbsp1_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <9>;
+		};
+
+		omapctrl_ick: clock-omapctrl-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "omapctrl_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <6>;
+		};
+
+		aes2_ick: clock-aes2-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "aes2_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <28>;
+		};
+
+		sha12_ick: clock-sha12-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "sha12_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <27>;
+		};
 	};
 
 	gpmc_fck: gpmc_fck {
@@ -799,164 +1093,36 @@
 		clock-div = <1>;
 	};
 
-	mmchs2_ick: mmchs2_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <25>;
-	};
-
-	mmchs1_ick: mmchs1_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <24>;
-	};
-
-	hdq_ick: hdq_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <22>;
-	};
-
-	mcspi4_ick: mcspi4_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <21>;
-	};
-
-	mcspi3_ick: mcspi3_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <20>;
-	};
-
-	mcspi2_ick: mcspi2_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <19>;
-	};
-
-	mcspi1_ick: mcspi1_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <18>;
-	};
-
-	i2c3_ick: i2c3_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <17>;
-	};
-
-	i2c2_ick: i2c2_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <16>;
-	};
-
-	i2c1_ick: i2c1_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <15>;
-	};
-
-	uart2_ick: uart2_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <14>;
-	};
-
-	uart1_ick: uart1_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <13>;
-	};
-
-	gpt11_ick: gpt11_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <12>;
-	};
-
-	gpt10_ick: gpt10_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <11>;
-	};
-
-	mcbsp5_ick: mcbsp5_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <10>;
-	};
-
-	mcbsp1_ick: mcbsp1_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <9>;
-	};
-
-	omapctrl_ick: omapctrl_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <6>;
-	};
-
-	dss_tv_fck: dss_tv_fck@e00 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&omap_54m_fck>;
-		reg = <0x0e00>;
-		ti,bit-shift = <2>;
-	};
-
-	dss_96m_fck: dss_96m_fck@e00 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&omap_96m_fck>;
-		reg = <0x0e00>;
-		ti,bit-shift = <2>;
-	};
-
-	dss2_alwon_fck: dss2_alwon_fck@e00 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_ck>;
-		reg = <0x0e00>;
-		ti,bit-shift = <1>;
+	/* CM_FCLKEN_DSS */
+	clock@e00 {
+		compatible = "ti,clksel";
+		reg = <0xe00>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		dss_tv_fck: clock-dss-tv-fck {
+			#clock-cells = <0>;
+			compatible = "ti,gate-clock";
+			clock-output-names = "dss_tv_fck";
+			clocks = <&omap_54m_fck>;
+			ti,bit-shift = <2>;
+		};
+
+		dss_96m_fck: clock-dss-96m-fck {
+			#clock-cells = <0>;
+			compatible = "ti,gate-clock";
+			clock-output-names = "dss_96m_fck";
+			clocks = <&omap_96m_fck>;
+			ti,bit-shift = <2>;
+		};
+
+		dss2_alwon_fck: clock-dss2-alwon-fck {
+			#clock-cells = <0>;
+			compatible = "ti,gate-clock";
+			clock-output-names = "dss2_alwon_fck";
+			clocks = <&sys_ck>;
+			ti,bit-shift = <1>;
+		};
 	};
 
 	dummy_ck: dummy_ck {
@@ -965,19 +1131,36 @@
 		clock-frequency = <0>;
 	};
 
-	gpt1_gate_fck: gpt1_gate_fck@c00 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0c00>;
-	};
-
-	gpt1_mux_fck: gpt1_mux_fck@c40 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		reg = <0x0c40>;
+	/* CM_FCLKEN_WKUP */
+	clock@c00 {
+		compatible = "ti,clksel";
+		reg = <0xc00>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		gpt1_gate_fck: clock-gpt1-gate-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-gate-clock";
+			clock-output-names = "gpt1_gate_fck";
+			clocks = <&sys_ck>;
+			ti,bit-shift = <0>;
+		};
+
+		gpio1_dbck: clock-gpio1-dbck {
+			#clock-cells = <0>;
+			compatible = "ti,gate-clock";
+			clock-output-names = "gpio1_dbck";
+			clocks = <&wkup_32k_fck>;
+			ti,bit-shift = <3>;
+		};
+
+		wdt2_fck: clock-wdt2-fck {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "wdt2_fck";
+			clocks = <&wkup_32k_fck>;
+			ti,bit-shift = <5>;
+		};
 	};
 
 	gpt1_fck: gpt1_fck {
@@ -986,14 +1169,6 @@
 		clocks = <&gpt1_gate_fck>, <&gpt1_mux_fck>;
 	};
 
-	aes2_ick: aes2_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		ti,bit-shift = <28>;
-		reg = <0x0a10>;
-	};
-
 	wkup_32k_fck: wkup_32k_fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
@@ -1002,76 +1177,60 @@
 		clock-div = <1>;
 	};
 
-	gpio1_dbck: gpio1_dbck@c00 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&wkup_32k_fck>;
-		reg = <0x0c00>;
-		ti,bit-shift = <3>;
-	};
-
-	sha12_ick: sha12_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <27>;
-	};
-
-	wdt2_fck: wdt2_fck@c00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&wkup_32k_fck>;
-		reg = <0x0c00>;
-		ti,bit-shift = <5>;
-	};
-
-	wdt2_ick: wdt2_ick@c10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&wkup_l4_ick>;
-		reg = <0x0c10>;
-		ti,bit-shift = <5>;
-	};
-
-	wdt1_ick: wdt1_ick@c10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&wkup_l4_ick>;
-		reg = <0x0c10>;
-		ti,bit-shift = <4>;
-	};
-
-	gpio1_ick: gpio1_ick@c10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&wkup_l4_ick>;
-		reg = <0x0c10>;
-		ti,bit-shift = <3>;
-	};
-
-	omap_32ksync_ick: omap_32ksync_ick@c10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&wkup_l4_ick>;
-		reg = <0x0c10>;
-		ti,bit-shift = <2>;
-	};
-
-	gpt12_ick: gpt12_ick@c10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&wkup_l4_ick>;
-		reg = <0x0c10>;
-		ti,bit-shift = <1>;
-	};
-
-	gpt1_ick: gpt1_ick@c10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&wkup_l4_ick>;
-		reg = <0x0c10>;
-		ti,bit-shift = <0>;
+	/* CM_ICLKEN_WKUP */
+	clock@c10 {
+		compatible = "ti,clksel";
+		reg = <0xc10>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		wdt2_ick: clock-wdt2-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "wdt2_ick";
+			clocks = <&wkup_l4_ick>;
+			ti,bit-shift = <5>;
+		};
+
+		wdt1_ick: clock-wdt1-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "wdt1_ick";
+			clocks = <&wkup_l4_ick>;
+			ti,bit-shift = <4>;
+		};
+
+		gpio1_ick: clock-gpio1-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "gpio1_ick";
+			clocks = <&wkup_l4_ick>;
+			ti,bit-shift = <3>;
+		};
+
+		omap_32ksync_ick: clock-omap-32ksync-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "omap_32ksync_ick";
+			clocks = <&wkup_l4_ick>;
+			ti,bit-shift = <2>;
+		};
+
+		gpt12_ick: clock-gpt12-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "gpt12_ick";
+			clocks = <&wkup_l4_ick>;
+			ti,bit-shift = <1>;
+		};
+
+		gpt1_ick: clock-gpt1-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "gpt1_ick";
+			clocks = <&wkup_l4_ick>;
+			ti,bit-shift = <0>;
+		};
 	};
 
 	per_96m_fck: per_96m_fck {
@@ -1090,27 +1249,227 @@
 		clock-div = <1>;
 	};
 
-	uart3_fck: uart3_fck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&per_48m_fck>;
-		reg = <0x1000>;
-		ti,bit-shift = <11>;
-	};
-
-	gpt2_gate_fck: gpt2_gate_fck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <3>;
+	/* CM_FCLKEN_PER */
+	clock@1000 {
+		compatible = "ti,clksel";
 		reg = <0x1000>;
-	};
-
-	gpt2_mux_fck: gpt2_mux_fck@1040 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		uart3_fck: clock-uart3-fck {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "uart3_fck";
+			clocks = <&per_48m_fck>;
+			ti,bit-shift = <11>;
+		};
+
+		gpt2_gate_fck: clock-gpt2-gate-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-gate-clock";
+			clock-output-names = "gpt2_gate_fck";
+			clocks = <&sys_ck>;
+			ti,bit-shift = <3>;
+		};
+
+		gpt3_gate_fck: clock-gpt3-gate-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-gate-clock";
+			clock-output-names = "gpt3_gate_fck";
+			clocks = <&sys_ck>;
+			ti,bit-shift = <4>;
+		};
+
+		gpt4_gate_fck: clock-gpt4-gate-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-gate-clock";
+			clock-output-names = "gpt4_gate_fck";
+			clocks = <&sys_ck>;
+			ti,bit-shift = <5>;
+		};
+
+		gpt5_gate_fck: clock-gpt5-gate-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-gate-clock";
+			clock-output-names = "gpt5_gate_fck";
+			clocks = <&sys_ck>;
+			ti,bit-shift = <6>;
+		};
+
+		gpt6_gate_fck: clock-gpt6-gate-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-gate-clock";
+			clock-output-names = "gpt6_gate_fck";
+			clocks = <&sys_ck>;
+			ti,bit-shift = <7>;
+		};
+
+		gpt7_gate_fck: clock-gpt7-gate-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-gate-clock";
+			clock-output-names = "gpt7_gate_fck";
+			clocks = <&sys_ck>;
+			ti,bit-shift = <8>;
+		};
+
+		gpt8_gate_fck: clock-gpt8-gate-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-gate-clock";
+			clock-output-names = "gpt8_gate_fck";
+			clocks = <&sys_ck>;
+			ti,bit-shift = <9>;
+		};
+
+		gpt9_gate_fck: clock-gpt9-gate-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-gate-clock";
+			clock-output-names = "gpt9_gate_fck";
+			clocks = <&sys_ck>;
+			ti,bit-shift = <10>;
+		};
+
+		gpio6_dbck: clock-gpio6-dbck {
+			#clock-cells = <0>;
+			compatible = "ti,gate-clock";
+			clock-output-names = "gpio6_dbck";
+			clocks = <&per_32k_alwon_fck>;
+			ti,bit-shift = <17>;
+		};
+
+		gpio5_dbck: clock-gpio5-dbck {
+			#clock-cells = <0>;
+			compatible = "ti,gate-clock";
+			clock-output-names = "gpio5_dbck";
+			clocks = <&per_32k_alwon_fck>;
+			ti,bit-shift = <16>;
+		};
+
+		gpio4_dbck: clock-gpio4-dbck {
+			#clock-cells = <0>;
+			compatible = "ti,gate-clock";
+			clock-output-names = "gpio4_dbck";
+			clocks = <&per_32k_alwon_fck>;
+			ti,bit-shift = <15>;
+		};
+
+		gpio3_dbck: clock-gpio3-dbck {
+			#clock-cells = <0>;
+			compatible = "ti,gate-clock";
+			clock-output-names = "gpio3_dbck";
+			clocks = <&per_32k_alwon_fck>;
+			ti,bit-shift = <14>;
+		};
+
+		gpio2_dbck: clock-gpio2-dbck {
+			#clock-cells = <0>;
+			compatible = "ti,gate-clock";
+			clock-output-names = "gpio2_dbck";
+			clocks = <&per_32k_alwon_fck>;
+			ti,bit-shift = <13>;
+		};
+
+		wdt3_fck: clock-wdt3-fck {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "wdt3_fck";
+			clocks = <&per_32k_alwon_fck>;
+			ti,bit-shift = <12>;
+		};
+
+		mcbsp2_gate_fck: clock-mcbsp2-gate-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-gate-clock";
+			clock-output-names = "mcbsp2_gate_fck";
+			clocks = <&mcbsp_clks>;
+			ti,bit-shift = <0>;
+		};
+
+		mcbsp3_gate_fck: clock-mcbsp3-gate-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-gate-clock";
+			clock-output-names = "mcbsp3_gate_fck";
+			clocks = <&mcbsp_clks>;
+			ti,bit-shift = <1>;
+		};
+
+		mcbsp4_gate_fck: clock-mcbsp4-gate-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-gate-clock";
+			clock-output-names = "mcbsp4_gate_fck";
+			clocks = <&mcbsp_clks>;
+			ti,bit-shift = <2>;
+		};
+	};
+
+	/* CM_CLKSEL_PER */
+	clock@1040 {
+		compatible = "ti,clksel";
 		reg = <0x1040>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		gpt2_mux_fck: clock-gpt2-mux-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-mux-clock";
+			clock-output-names = "gpt2_mux_fck";
+			clocks = <&omap_32k_fck>, <&sys_ck>;
+		};
+
+		gpt3_mux_fck: clock-gpt3-mux-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-mux-clock";
+			clock-output-names = "gpt3_mux_fck";
+			clocks = <&omap_32k_fck>, <&sys_ck>;
+			ti,bit-shift = <1>;
+		};
+
+		gpt4_mux_fck: clock-gpt4-mux-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-mux-clock";
+			clock-output-names = "gpt4_mux_fck";
+			clocks = <&omap_32k_fck>, <&sys_ck>;
+			ti,bit-shift = <2>;
+		};
+
+		gpt5_mux_fck: clock-gpt5-mux-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-mux-clock";
+			clock-output-names = "gpt5_mux_fck";
+			clocks = <&omap_32k_fck>, <&sys_ck>;
+			ti,bit-shift = <3>;
+		};
+
+		gpt6_mux_fck: clock-gpt6-mux-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-mux-clock";
+			clock-output-names = "gpt6_mux_fck";
+			clocks = <&omap_32k_fck>, <&sys_ck>;
+			ti,bit-shift = <4>;
+		};
+
+		gpt7_mux_fck: clock-gpt7-mux-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-mux-clock";
+			clock-output-names = "gpt7_mux_fck";
+			clocks = <&omap_32k_fck>, <&sys_ck>;
+			ti,bit-shift = <5>;
+		};
+
+		gpt8_mux_fck: clock-gpt8-mux-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-mux-clock";
+			clock-output-names = "gpt8_mux_fck";
+			clocks = <&omap_32k_fck>, <&sys_ck>;
+			ti,bit-shift = <6>;
+		};
+
+		gpt9_mux_fck: clock-gpt9-mux-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-mux-clock";
+			clock-output-names = "gpt9_mux_fck";
+			clocks = <&omap_32k_fck>, <&sys_ck>;
+			ti,bit-shift = <7>;
+		};
 	};
 
 	gpt2_fck: gpt2_fck {
@@ -1119,154 +1478,42 @@
 		clocks = <&gpt2_gate_fck>, <&gpt2_mux_fck>;
 	};
 
-	gpt3_gate_fck: gpt3_gate_fck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <4>;
-		reg = <0x1000>;
-	};
-
-	gpt3_mux_fck: gpt3_mux_fck@1040 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x1040>;
-	};
-
 	gpt3_fck: gpt3_fck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
 		clocks = <&gpt3_gate_fck>, <&gpt3_mux_fck>;
 	};
 
-	gpt4_gate_fck: gpt4_gate_fck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <5>;
-		reg = <0x1000>;
-	};
-
-	gpt4_mux_fck: gpt4_mux_fck@1040 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x1040>;
-	};
-
 	gpt4_fck: gpt4_fck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
 		clocks = <&gpt4_gate_fck>, <&gpt4_mux_fck>;
 	};
 
-	gpt5_gate_fck: gpt5_gate_fck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <6>;
-		reg = <0x1000>;
-	};
-
-	gpt5_mux_fck: gpt5_mux_fck@1040 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <3>;
-		reg = <0x1040>;
-	};
-
 	gpt5_fck: gpt5_fck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
 		clocks = <&gpt5_gate_fck>, <&gpt5_mux_fck>;
 	};
 
-	gpt6_gate_fck: gpt6_gate_fck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x1000>;
-	};
-
-	gpt6_mux_fck: gpt6_mux_fck@1040 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <4>;
-		reg = <0x1040>;
-	};
-
 	gpt6_fck: gpt6_fck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
 		clocks = <&gpt6_gate_fck>, <&gpt6_mux_fck>;
 	};
 
-	gpt7_gate_fck: gpt7_gate_fck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1000>;
-	};
-
-	gpt7_mux_fck: gpt7_mux_fck@1040 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <5>;
-		reg = <0x1040>;
-	};
-
 	gpt7_fck: gpt7_fck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
 		clocks = <&gpt7_gate_fck>, <&gpt7_mux_fck>;
 	};
 
-	gpt8_gate_fck: gpt8_gate_fck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <9>;
-		reg = <0x1000>;
-	};
-
-	gpt8_mux_fck: gpt8_mux_fck@1040 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <6>;
-		reg = <0x1040>;
-	};
-
 	gpt8_fck: gpt8_fck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
 		clocks = <&gpt8_gate_fck>, <&gpt8_mux_fck>;
 	};
 
-	gpt9_gate_fck: gpt9_gate_fck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <10>;
-		reg = <0x1000>;
-	};
-
-	gpt9_mux_fck: gpt9_mux_fck@1040 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x1040>;
-	};
-
 	gpt9_fck: gpt9_fck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
@@ -1281,54 +1528,6 @@
 		clock-div = <1>;
 	};
 
-	gpio6_dbck: gpio6_dbck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&per_32k_alwon_fck>;
-		reg = <0x1000>;
-		ti,bit-shift = <17>;
-	};
-
-	gpio5_dbck: gpio5_dbck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&per_32k_alwon_fck>;
-		reg = <0x1000>;
-		ti,bit-shift = <16>;
-	};
-
-	gpio4_dbck: gpio4_dbck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&per_32k_alwon_fck>;
-		reg = <0x1000>;
-		ti,bit-shift = <15>;
-	};
-
-	gpio3_dbck: gpio3_dbck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&per_32k_alwon_fck>;
-		reg = <0x1000>;
-		ti,bit-shift = <14>;
-	};
-
-	gpio2_dbck: gpio2_dbck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&per_32k_alwon_fck>;
-		reg = <0x1000>;
-		ti,bit-shift = <13>;
-	};
-
-	wdt3_fck: wdt3_fck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&per_32k_alwon_fck>;
-		reg = <0x1000>;
-		ti,bit-shift = <12>;
-	};
-
 	per_l4_ick: per_l4_ick {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
@@ -1337,187 +1536,164 @@
 		clock-div = <1>;
 	};
 
-	gpio6_ick: gpio6_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <17>;
-	};
-
-	gpio5_ick: gpio5_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <16>;
-	};
-
-	gpio4_ick: gpio4_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <15>;
-	};
-
-	gpio3_ick: gpio3_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <14>;
-	};
-
-	gpio2_ick: gpio2_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <13>;
-	};
-
-	wdt3_ick: wdt3_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <12>;
-	};
-
-	uart3_ick: uart3_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <11>;
-	};
-
-	uart4_ick: uart4_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <18>;
-	};
-
-	gpt9_ick: gpt9_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <10>;
-	};
-
-	gpt8_ick: gpt8_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <9>;
-	};
-
-	gpt7_ick: gpt7_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <8>;
-	};
-
-	gpt6_ick: gpt6_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <7>;
-	};
-
-	gpt5_ick: gpt5_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <6>;
-	};
-
-	gpt4_ick: gpt4_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <5>;
-	};
-
-	gpt3_ick: gpt3_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <4>;
-	};
-
-	gpt2_ick: gpt2_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <3>;
-	};
-
-	mcbsp2_ick: mcbsp2_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <0>;
-	};
-
-	mcbsp3_ick: mcbsp3_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <1>;
-	};
-
-	mcbsp4_ick: mcbsp4_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
+	/* CM_ICLKEN_PER */
+	clock@1010 {
+		compatible = "ti,clksel";
 		reg = <0x1010>;
-		ti,bit-shift = <2>;
-	};
-
-	mcbsp2_gate_fck: mcbsp2_gate_fck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&mcbsp_clks>;
-		ti,bit-shift = <0>;
-		reg = <0x1000>;
-	};
-
-	mcbsp3_gate_fck: mcbsp3_gate_fck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&mcbsp_clks>;
-		ti,bit-shift = <1>;
-		reg = <0x1000>;
-	};
-
-	mcbsp4_gate_fck: mcbsp4_gate_fck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&mcbsp_clks>;
-		ti,bit-shift = <2>;
-		reg = <0x1000>;
-	};
-
-	emu_src_mux_ck: emu_src_mux_ck@1140 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>;
-		reg = <0x1140>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		gpio6_ick: clock-gpio6-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "gpio6_ick";
+			clocks = <&per_l4_ick>;
+			ti,bit-shift = <17>;
+		};
+
+		gpio5_ick: clock-gpio5-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "gpio5_ick";
+			clocks = <&per_l4_ick>;
+			ti,bit-shift = <16>;
+		};
+
+		gpio4_ick: clock-gpio4-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "gpio4_ick";
+			clocks = <&per_l4_ick>;
+			ti,bit-shift = <15>;
+		};
+
+		gpio3_ick: clock-gpio3-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "gpio3_ick";
+			clocks = <&per_l4_ick>;
+			ti,bit-shift = <14>;
+		};
+
+		gpio2_ick: clock-gpio2-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "gpio2_ick";
+			clocks = <&per_l4_ick>;
+			ti,bit-shift = <13>;
+		};
+
+		wdt3_ick: clock-wdt3-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "wdt3_ick";
+			clocks = <&per_l4_ick>;
+			ti,bit-shift = <12>;
+		};
+
+		uart3_ick: clock-uart3-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "uart3_ick";
+			clocks = <&per_l4_ick>;
+			ti,bit-shift = <11>;
+		};
+
+		uart4_ick: clock-uart4-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "uart4_ick";
+			clocks = <&per_l4_ick>;
+			ti,bit-shift = <18>;
+		};
+
+		gpt9_ick: clock-gpt9-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "gpt9_ick";
+			clocks = <&per_l4_ick>;
+			ti,bit-shift = <10>;
+		};
+
+		gpt8_ick: clock-gpt8-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "gpt8_ick";
+			clocks = <&per_l4_ick>;
+			ti,bit-shift = <9>;
+		};
+
+		gpt7_ick: clock-gpt7-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "gpt7_ick";
+			clocks = <&per_l4_ick>;
+			ti,bit-shift = <8>;
+		};
+
+		gpt6_ick: clock-gpt6-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "gpt6_ick";
+			clocks = <&per_l4_ick>;
+			ti,bit-shift = <7>;
+		};
+
+		gpt5_ick: clock-gpt5-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "gpt5_ick";
+			clocks = <&per_l4_ick>;
+			ti,bit-shift = <6>;
+		};
+
+		gpt4_ick: clock-gpt4-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "gpt4_ick";
+			clocks = <&per_l4_ick>;
+			ti,bit-shift = <5>;
+		};
+
+		gpt3_ick: clock-gpt3-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "gpt3_ick";
+			clocks = <&per_l4_ick>;
+			ti,bit-shift = <4>;
+		};
+
+		gpt2_ick: clock-gpt2-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "gpt2_ick";
+			clocks = <&per_l4_ick>;
+			ti,bit-shift = <3>;
+		};
+
+		mcbsp2_ick: clock-mcbsp2-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "mcbsp2_ick";
+			clocks = <&per_l4_ick>;
+			ti,bit-shift = <0>;
+		};
+
+		mcbsp3_ick: clock-mcbsp3-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "mcbsp3_ick";
+			clocks = <&per_l4_ick>;
+			ti,bit-shift = <1>;
+		};
+
+		mcbsp4_ick: clock-mcbsp4-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "mcbsp4_ick";
+			clocks = <&per_l4_ick>;
+			ti,bit-shift = <2>;
+		};
 	};
 
 	emu_src_ck: emu_src_ck {
@@ -1526,54 +1702,6 @@
 		clocks = <&emu_src_mux_ck>;
 	};
 
-	pclk_fck: pclk_fck@1140 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&emu_src_ck>;
-		ti,bit-shift = <8>;
-		ti,max-div = <7>;
-		reg = <0x1140>;
-		ti,index-starts-at-one;
-	};
-
-	pclkx2_fck: pclkx2_fck@1140 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&emu_src_ck>;
-		ti,bit-shift = <6>;
-		ti,max-div = <3>;
-		reg = <0x1140>;
-		ti,index-starts-at-one;
-	};
-
-	atclk_fck: atclk_fck@1140 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&emu_src_ck>;
-		ti,bit-shift = <4>;
-		ti,max-div = <3>;
-		reg = <0x1140>;
-		ti,index-starts-at-one;
-	};
-
-	traceclk_src_fck: traceclk_src_fck@1140 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x1140>;
-	};
-
-	traceclk_fck: traceclk_fck@1140 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&traceclk_src_fck>;
-		ti,bit-shift = <11>;
-		ti,max-div = <7>;
-		reg = <0x1140>;
-		ti,index-starts-at-one;
-	};
-
 	secure_32k_fck: secure_32k_fck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
diff --git a/arch/arm/boot/dts/omap4-cpu-thermal.dtsi b/arch/arm/boot/dts/omap4-cpu-thermal.dtsi
index 03d054b2bf9a..4d7eeb133dad 100644
--- a/arch/arm/boot/dts/omap4-cpu-thermal.dtsi
+++ b/arch/arm/boot/dts/omap4-cpu-thermal.dtsi
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for OMAP4/5 SoC CPU thermal
  *
  * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
  * Contact: Eduardo Valentin <eduardo.valentin@ti.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/thermal/thermal.h>
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 609a8dea946b..518652a599bd 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -558,7 +558,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ethernet: usbether@1 {
+		ethernet: ethernet@1 {
 			compatible = "usb424,ec00";
 			reg = <1>;
 		};
diff --git a/arch/arm/boot/dts/omap443x-clocks.dtsi b/arch/arm/boot/dts/omap443x-clocks.dtsi
index 39297868ec85..581e088231b5 100644
--- a/arch/arm/boot/dts/omap443x-clocks.dtsi
+++ b/arch/arm/boot/dts/omap443x-clocks.dtsi
@@ -8,6 +8,7 @@
 	bandgap_fclk: bandgap_fclk@1888 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "bandgap_fclk";
 		clocks = <&sys_32k_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x1888>;
diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi
index 8466161197ae..238aceb799f8 100644
--- a/arch/arm/boot/dts/omap443x.dtsi
+++ b/arch/arm/boot/dts/omap443x.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for OMAP443x SoC
  *
  * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include "omap4.dtsi"
diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi
index 3d6db1db94e0..1b27a862ae81 100644
--- a/arch/arm/boot/dts/omap4460.dtsi
+++ b/arch/arm/boot/dts/omap4460.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for OMAP4460 SoC
  *
  * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 #include "omap4.dtsi"
 
diff --git a/arch/arm/boot/dts/omap446x-clocks.dtsi b/arch/arm/boot/dts/omap446x-clocks.dtsi
index 0f41714cffbb..d9362fef6720 100644
--- a/arch/arm/boot/dts/omap446x-clocks.dtsi
+++ b/arch/arm/boot/dts/omap446x-clocks.dtsi
@@ -8,6 +8,7 @@
 	div_ts_ck: div_ts_ck@1888 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "div_ts_ck";
 		clocks = <&l4_wkup_clk_mux_ck>;
 		ti,bit-shift = <24>;
 		reg = <0x1888>;
@@ -17,6 +18,7 @@
 	bandgap_ts_fclk: bandgap_ts_fclk@1888 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "bandgap_ts_fclk";
 		clocks = <&div_ts_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x1888>;
diff --git a/arch/arm/boot/dts/omap44xx-clocks.dtsi b/arch/arm/boot/dts/omap44xx-clocks.dtsi
index 1f1c04d8f472..8df73d285638 100644
--- a/arch/arm/boot/dts/omap44xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap44xx-clocks.dtsi
@@ -8,18 +8,21 @@
 	extalt_clkin_ck: extalt_clkin_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "extalt_clkin_ck";
 		clock-frequency = <59000000>;
 	};
 
 	pad_clks_src_ck: pad_clks_src_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "pad_clks_src_ck";
 		clock-frequency = <12000000>;
 	};
 
 	pad_clks_ck: pad_clks_ck@108 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "pad_clks_ck";
 		clocks = <&pad_clks_src_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0108>;
@@ -28,24 +31,28 @@
 	pad_slimbus_core_clks_ck: pad_slimbus_core_clks_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "pad_slimbus_core_clks_ck";
 		clock-frequency = <12000000>;
 	};
 
 	secure_32k_clk_src_ck: secure_32k_clk_src_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "secure_32k_clk_src_ck";
 		clock-frequency = <32768>;
 	};
 
 	slimbus_src_clk: slimbus_src_clk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "slimbus_src_clk";
 		clock-frequency = <12000000>;
 	};
 
 	slimbus_clk: slimbus_clk@108 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "slimbus_clk";
 		clocks = <&slimbus_src_clk>;
 		ti,bit-shift = <10>;
 		reg = <0x0108>;
@@ -54,84 +61,98 @@
 	sys_32k_ck: sys_32k_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "sys_32k_ck";
 		clock-frequency = <32768>;
 	};
 
 	virt_12000000_ck: virt_12000000_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_12000000_ck";
 		clock-frequency = <12000000>;
 	};
 
 	virt_13000000_ck: virt_13000000_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_13000000_ck";
 		clock-frequency = <13000000>;
 	};
 
 	virt_16800000_ck: virt_16800000_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_16800000_ck";
 		clock-frequency = <16800000>;
 	};
 
 	virt_19200000_ck: virt_19200000_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_19200000_ck";
 		clock-frequency = <19200000>;
 	};
 
 	virt_26000000_ck: virt_26000000_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_26000000_ck";
 		clock-frequency = <26000000>;
 	};
 
 	virt_27000000_ck: virt_27000000_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_27000000_ck";
 		clock-frequency = <27000000>;
 	};
 
 	virt_38400000_ck: virt_38400000_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_38400000_ck";
 		clock-frequency = <38400000>;
 	};
 
 	tie_low_clock_ck: tie_low_clock_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "tie_low_clock_ck";
 		clock-frequency = <0>;
 	};
 
 	utmi_phy_clkout_ck: utmi_phy_clkout_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "utmi_phy_clkout_ck";
 		clock-frequency = <60000000>;
 	};
 
 	xclk60mhsp1_ck: xclk60mhsp1_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "xclk60mhsp1_ck";
 		clock-frequency = <60000000>;
 	};
 
 	xclk60mhsp2_ck: xclk60mhsp2_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "xclk60mhsp2_ck";
 		clock-frequency = <60000000>;
 	};
 
 	xclk60motg_ck: xclk60motg_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "xclk60motg_ck";
 		clock-frequency = <60000000>;
 	};
 
 	dpll_abe_ck: dpll_abe_ck@1e0 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-m4xen-clock";
+		clock-output-names = "dpll_abe_ck";
 		clocks = <&abe_dpll_refclk_mux_ck>, <&abe_dpll_bypass_clk_mux_ck>;
 		reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
 	};
@@ -139,6 +160,7 @@
 	dpll_abe_x2_ck: dpll_abe_x2_ck@1f0 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-x2-clock";
+		clock-output-names = "dpll_abe_x2_ck";
 		clocks = <&dpll_abe_ck>;
 		reg = <0x01f0>;
 	};
@@ -146,6 +168,7 @@
 	dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_abe_m2x2_ck";
 		clocks = <&dpll_abe_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -157,6 +180,7 @@
 	abe_24m_fclk: abe_24m_fclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "abe_24m_fclk";
 		clocks = <&dpll_abe_m2x2_ck>;
 		clock-mult = <1>;
 		clock-div = <8>;
@@ -165,6 +189,7 @@
 	abe_clk: abe_clk@108 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "abe_clk";
 		clocks = <&dpll_abe_m2x2_ck>;
 		ti,max-div = <4>;
 		reg = <0x0108>;
@@ -175,6 +200,7 @@
 	dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_abe_m3x2_ck";
 		clocks = <&dpll_abe_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -186,6 +212,7 @@
 	core_hsd_byp_clk_mux_ck: core_hsd_byp_clk_mux_ck@12c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "core_hsd_byp_clk_mux_ck";
 		clocks = <&sys_clkin_ck>, <&dpll_abe_m3x2_ck>;
 		ti,bit-shift = <23>;
 		reg = <0x012c>;
@@ -194,6 +221,7 @@
 	dpll_core_ck: dpll_core_ck@120 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-core-clock";
+		clock-output-names = "dpll_core_ck";
 		clocks = <&sys_clkin_ck>, <&core_hsd_byp_clk_mux_ck>;
 		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
 	};
@@ -201,12 +229,14 @@
 	dpll_core_x2_ck: dpll_core_x2_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-x2-clock";
+		clock-output-names = "dpll_core_x2_ck";
 		clocks = <&dpll_core_ck>;
 	};
 
 	dpll_core_m6x2_ck: dpll_core_m6x2_ck@140 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_m6x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -218,6 +248,7 @@
 	dpll_core_m2_ck: dpll_core_m2_ck@130 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_m2_ck";
 		clocks = <&dpll_core_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -229,6 +260,7 @@
 	ddrphy_ck: ddrphy_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "ddrphy_ck";
 		clocks = <&dpll_core_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
@@ -237,6 +269,7 @@
 	dpll_core_m5x2_ck: dpll_core_m5x2_ck@13c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_m5x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -248,6 +281,7 @@
 	div_core_ck: div_core_ck@100 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "div_core_ck";
 		clocks = <&dpll_core_m5x2_ck>;
 		reg = <0x0100>;
 		ti,max-div = <2>;
@@ -256,6 +290,7 @@
 	div_iva_hs_clk: div_iva_hs_clk@1dc {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "div_iva_hs_clk";
 		clocks = <&dpll_core_m5x2_ck>;
 		ti,max-div = <4>;
 		reg = <0x01dc>;
@@ -265,6 +300,7 @@
 	div_mpu_hs_clk: div_mpu_hs_clk@19c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "div_mpu_hs_clk";
 		clocks = <&dpll_core_m5x2_ck>;
 		ti,max-div = <4>;
 		reg = <0x019c>;
@@ -274,6 +310,7 @@
 	dpll_core_m4x2_ck: dpll_core_m4x2_ck@138 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_m4x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -285,6 +322,7 @@
 	dll_clk_div_ck: dll_clk_div_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dll_clk_div_ck";
 		clocks = <&dpll_core_m4x2_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
@@ -293,6 +331,7 @@
 	dpll_abe_m2_ck: dpll_abe_m2_ck@1f0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_abe_m2_ck";
 		clocks = <&dpll_abe_ck>;
 		ti,max-div = <31>;
 		reg = <0x01f0>;
@@ -302,6 +341,7 @@
 	dpll_core_m3x2_gate_ck: dpll_core_m3x2_gate_ck@134 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
+		clock-output-names = "dpll_core_m3x2_gate_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0134>;
@@ -310,6 +350,7 @@
 	dpll_core_m3x2_div_ck: dpll_core_m3x2_div_ck@134 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-divider-clock";
+		clock-output-names = "dpll_core_m3x2_div_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <31>;
 		reg = <0x0134>;
@@ -319,12 +360,14 @@
 	dpll_core_m3x2_ck: dpll_core_m3x2_ck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
+		clock-output-names = "dpll_core_m3x2_ck";
 		clocks = <&dpll_core_m3x2_gate_ck>, <&dpll_core_m3x2_div_ck>;
 	};
 
 	dpll_core_m7x2_ck: dpll_core_m7x2_ck@144 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_m7x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -336,6 +379,7 @@
 	iva_hsd_byp_clk_mux_ck: iva_hsd_byp_clk_mux_ck@1ac {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "iva_hsd_byp_clk_mux_ck";
 		clocks = <&sys_clkin_ck>, <&div_iva_hs_clk>;
 		ti,bit-shift = <23>;
 		reg = <0x01ac>;
@@ -344,6 +388,7 @@
 	dpll_iva_ck: dpll_iva_ck@1a0 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
+		clock-output-names = "dpll_iva_ck";
 		clocks = <&sys_clkin_ck>, <&iva_hsd_byp_clk_mux_ck>;
 		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
 		assigned-clocks = <&dpll_iva_ck>;
@@ -353,12 +398,14 @@
 	dpll_iva_x2_ck: dpll_iva_x2_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-x2-clock";
+		clock-output-names = "dpll_iva_x2_ck";
 		clocks = <&dpll_iva_ck>;
 	};
 
 	dpll_iva_m4x2_ck: dpll_iva_m4x2_ck@1b8 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_iva_m4x2_ck";
 		clocks = <&dpll_iva_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -372,6 +419,7 @@
 	dpll_iva_m5x2_ck: dpll_iva_m5x2_ck@1bc {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_iva_m5x2_ck";
 		clocks = <&dpll_iva_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -385,6 +433,7 @@
 	dpll_mpu_ck: dpll_mpu_ck@160 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
+		clock-output-names = "dpll_mpu_ck";
 		clocks = <&sys_clkin_ck>, <&div_mpu_hs_clk>;
 		reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
 	};
@@ -392,6 +441,7 @@
 	dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_mpu_m2_ck";
 		clocks = <&dpll_mpu_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -403,6 +453,7 @@
 	per_hs_clk_div_ck: per_hs_clk_div_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "per_hs_clk_div_ck";
 		clocks = <&dpll_abe_m3x2_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
@@ -411,6 +462,7 @@
 	usb_hs_clk_div_ck: usb_hs_clk_div_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "usb_hs_clk_div_ck";
 		clocks = <&dpll_abe_m3x2_ck>;
 		clock-mult = <1>;
 		clock-div = <3>;
@@ -419,6 +471,7 @@
 	l3_div_ck: l3_div_ck@100 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "l3_div_ck";
 		clocks = <&div_core_ck>;
 		ti,bit-shift = <4>;
 		ti,max-div = <2>;
@@ -428,6 +481,7 @@
 	l4_div_ck: l4_div_ck@100 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "l4_div_ck";
 		clocks = <&l3_div_ck>;
 		ti,bit-shift = <8>;
 		ti,max-div = <2>;
@@ -437,6 +491,7 @@
 	lp_clk_div_ck: lp_clk_div_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "lp_clk_div_ck";
 		clocks = <&dpll_abe_m2x2_ck>;
 		clock-mult = <1>;
 		clock-div = <16>;
@@ -445,6 +500,7 @@
 	mpu_periphclk: mpu_periphclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "mpu_periphclk";
 		clocks = <&dpll_mpu_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
@@ -453,6 +509,7 @@
 	ocp_abe_iclk: ocp_abe_iclk@528 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "ocp_abe_iclk";
 		clocks = <&abe_clkctrl OMAP4_AESS_CLKCTRL 24>;
 		ti,bit-shift = <24>;
 		reg = <0x0528>;
@@ -462,6 +519,7 @@
 	per_abe_24m_fclk: per_abe_24m_fclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "per_abe_24m_fclk";
 		clocks = <&dpll_abe_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <4>;
@@ -470,6 +528,7 @@
 	dummy_ck: dummy_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "dummy_ck";
 		clock-frequency = <0>;
 	};
 };
@@ -478,6 +537,7 @@
 	sys_clkin_ck: sys_clkin_ck@110 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "sys_clkin_ck";
 		clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
 		reg = <0x0110>;
 		ti,index-starts-at-one;
@@ -486,6 +546,7 @@
 	abe_dpll_bypass_clk_mux_ck: abe_dpll_bypass_clk_mux_ck@108 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "abe_dpll_bypass_clk_mux_ck";
 		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
 		ti,bit-shift = <24>;
 		reg = <0x0108>;
@@ -494,6 +555,7 @@
 	abe_dpll_refclk_mux_ck: abe_dpll_refclk_mux_ck@10c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "abe_dpll_refclk_mux_ck";
 		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
 		reg = <0x010c>;
 	};
@@ -501,6 +563,7 @@
 	dbgclk_mux_ck: dbgclk_mux_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dbgclk_mux_ck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
@@ -509,6 +572,7 @@
 	l4_wkup_clk_mux_ck: l4_wkup_clk_mux_ck@108 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "l4_wkup_clk_mux_ck";
 		clocks = <&sys_clkin_ck>, <&lp_clk_div_ck>;
 		reg = <0x0108>;
 	};
@@ -516,6 +580,7 @@
 	syc_clk_div_ck: syc_clk_div_ck@100 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "syc_clk_div_ck";
 		clocks = <&sys_clkin_ck>;
 		reg = <0x0100>;
 		ti,max-div = <2>;
@@ -524,6 +589,7 @@
 	usim_ck: usim_ck@1858 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "usim_ck";
 		clocks = <&dpll_per_m4x2_ck>;
 		ti,bit-shift = <24>;
 		reg = <0x1858>;
@@ -533,6 +599,7 @@
 	usim_fclk: usim_fclk@1858 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "usim_fclk";
 		clocks = <&usim_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x1858>;
@@ -541,6 +608,7 @@
 	trace_clk_div_ck: trace_clk_div_ck {
 		#clock-cells = <0>;
 		compatible = "ti,clkdm-gate-clock";
+		clock-output-names = "trace_clk_div_ck";
 		clocks = <&emu_sys_clkctrl OMAP4_DEBUGSS_CLKCTRL 24>;
 	};
 };
@@ -548,6 +616,7 @@
 &prm_clockdomains {
 	emu_sys_clkdm: emu_sys_clkdm {
 		compatible = "ti,clockdomain";
+		clock-output-names = "emu_sys_clkdm";
 		clocks = <&trace_clk_div_ck>;
 	};
 };
@@ -556,6 +625,7 @@
 	per_hsd_byp_clk_mux_ck: per_hsd_byp_clk_mux_ck@14c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "per_hsd_byp_clk_mux_ck";
 		clocks = <&sys_clkin_ck>, <&per_hs_clk_div_ck>;
 		ti,bit-shift = <23>;
 		reg = <0x014c>;
@@ -564,6 +634,7 @@
 	dpll_per_ck: dpll_per_ck@140 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
+		clock-output-names = "dpll_per_ck";
 		clocks = <&sys_clkin_ck>, <&per_hsd_byp_clk_mux_ck>;
 		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
 	};
@@ -571,6 +642,7 @@
 	dpll_per_m2_ck: dpll_per_m2_ck@150 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_m2_ck";
 		clocks = <&dpll_per_ck>;
 		ti,max-div = <31>;
 		reg = <0x0150>;
@@ -580,6 +652,7 @@
 	dpll_per_x2_ck: dpll_per_x2_ck@150 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-x2-clock";
+		clock-output-names = "dpll_per_x2_ck";
 		clocks = <&dpll_per_ck>;
 		reg = <0x0150>;
 	};
@@ -587,6 +660,7 @@
 	dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_m2x2_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -598,6 +672,7 @@
 	dpll_per_m3x2_gate_ck: dpll_per_m3x2_gate_ck@154 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
+		clock-output-names = "dpll_per_m3x2_gate_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0154>;
@@ -606,6 +681,7 @@
 	dpll_per_m3x2_div_ck: dpll_per_m3x2_div_ck@154 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-divider-clock";
+		clock-output-names = "dpll_per_m3x2_div_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <31>;
 		reg = <0x0154>;
@@ -615,12 +691,14 @@
 	dpll_per_m3x2_ck: dpll_per_m3x2_ck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
+		clock-output-names = "dpll_per_m3x2_ck";
 		clocks = <&dpll_per_m3x2_gate_ck>, <&dpll_per_m3x2_div_ck>;
 	};
 
 	dpll_per_m4x2_ck: dpll_per_m4x2_ck@158 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_m4x2_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -632,6 +710,7 @@
 	dpll_per_m5x2_ck: dpll_per_m5x2_ck@15c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_m5x2_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -643,6 +722,7 @@
 	dpll_per_m6x2_ck: dpll_per_m6x2_ck@160 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_m6x2_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -654,6 +734,7 @@
 	dpll_per_m7x2_ck: dpll_per_m7x2_ck@164 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_m7x2_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -665,6 +746,7 @@
 	dpll_usb_ck: dpll_usb_ck@180 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-j-type-clock";
+		clock-output-names = "dpll_usb_ck";
 		clocks = <&sys_clkin_ck>, <&usb_hs_clk_div_ck>;
 		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
 	};
@@ -672,6 +754,7 @@
 	dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck@1b4 {
 		#clock-cells = <0>;
 		compatible = "ti,fixed-factor-clock";
+		clock-output-names = "dpll_usb_clkdcoldo_ck";
 		clocks = <&dpll_usb_ck>;
 		ti,clock-div = <1>;
 		ti,autoidle-shift = <8>;
@@ -683,6 +766,7 @@
 	dpll_usb_m2_ck: dpll_usb_m2_ck@190 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_usb_m2_ck";
 		clocks = <&dpll_usb_ck>;
 		ti,max-div = <127>;
 		ti,autoidle-shift = <8>;
@@ -694,6 +778,7 @@
 	ducati_clk_mux_ck: ducati_clk_mux_ck@100 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "ducati_clk_mux_ck";
 		clocks = <&div_core_ck>, <&dpll_per_m6x2_ck>;
 		reg = <0x0100>;
 	};
@@ -701,6 +786,7 @@
 	func_12m_fclk: func_12m_fclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "func_12m_fclk";
 		clocks = <&dpll_per_m2x2_ck>;
 		clock-mult = <1>;
 		clock-div = <16>;
@@ -709,6 +795,7 @@
 	func_24m_clk: func_24m_clk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "func_24m_clk";
 		clocks = <&dpll_per_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <4>;
@@ -717,6 +804,7 @@
 	func_24mc_fclk: func_24mc_fclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "func_24mc_fclk";
 		clocks = <&dpll_per_m2x2_ck>;
 		clock-mult = <1>;
 		clock-div = <8>;
@@ -725,6 +813,7 @@
 	func_48m_fclk: func_48m_fclk@108 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "func_48m_fclk";
 		clocks = <&dpll_per_m2x2_ck>;
 		reg = <0x0108>;
 		ti,dividers = <4>, <8>;
@@ -733,6 +822,7 @@
 	func_48mc_fclk: func_48mc_fclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "func_48mc_fclk";
 		clocks = <&dpll_per_m2x2_ck>;
 		clock-mult = <1>;
 		clock-div = <4>;
@@ -741,6 +831,7 @@
 	func_64m_fclk: func_64m_fclk@108 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "func_64m_fclk";
 		clocks = <&dpll_per_m4x2_ck>;
 		reg = <0x0108>;
 		ti,dividers = <2>, <4>;
@@ -749,6 +840,7 @@
 	func_96m_fclk: func_96m_fclk@108 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "func_96m_fclk";
 		clocks = <&dpll_per_m2x2_ck>;
 		reg = <0x0108>;
 		ti,dividers = <2>, <4>;
@@ -757,6 +849,7 @@
 	init_60m_fclk: init_60m_fclk@104 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "init_60m_fclk";
 		clocks = <&dpll_usb_m2_ck>;
 		reg = <0x0104>;
 		ti,dividers = <1>, <8>;
@@ -765,6 +858,7 @@
 	per_abe_nc_fclk: per_abe_nc_fclk@108 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "per_abe_nc_fclk";
 		clocks = <&dpll_abe_m2_ck>;
 		reg = <0x0108>;
 		ti,max-div = <2>;
@@ -773,6 +867,7 @@
 	usb_phy_cm_clk32k: usb_phy_cm_clk32k@640 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "usb_phy_cm_clk32k";
 		clocks = <&sys_32k_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0640>;
@@ -782,6 +877,7 @@
 &cm2_clockdomains {
 	l3_init_clkdm: l3_init_clkdm {
 		compatible = "ti,clockdomain";
+		clock-output-names = "l3_init_clkdm";
 		clocks = <&dpll_usb_ck>;
 	};
 };
@@ -790,6 +886,7 @@
 	auxclk0_src_gate_ck: auxclk0_src_gate_ck@310 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
+		clock-output-names = "auxclk0_src_gate_ck";
 		clocks = <&dpll_core_m3x2_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0310>;
@@ -798,6 +895,7 @@
 	auxclk0_src_mux_ck: auxclk0_src_mux_ck@310 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
+		clock-output-names = "auxclk0_src_mux_ck";
 		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
 		ti,bit-shift = <1>;
 		reg = <0x0310>;
@@ -806,12 +904,14 @@
 	auxclk0_src_ck: auxclk0_src_ck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
+		clock-output-names = "auxclk0_src_ck";
 		clocks = <&auxclk0_src_gate_ck>, <&auxclk0_src_mux_ck>;
 	};
 
 	auxclk0_ck: auxclk0_ck@310 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "auxclk0_ck";
 		clocks = <&auxclk0_src_ck>;
 		ti,bit-shift = <16>;
 		ti,max-div = <16>;
@@ -821,6 +921,7 @@
 	auxclk1_src_gate_ck: auxclk1_src_gate_ck@314 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
+		clock-output-names = "auxclk1_src_gate_ck";
 		clocks = <&dpll_core_m3x2_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0314>;
@@ -829,6 +930,7 @@
 	auxclk1_src_mux_ck: auxclk1_src_mux_ck@314 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
+		clock-output-names = "auxclk1_src_mux_ck";
 		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
 		ti,bit-shift = <1>;
 		reg = <0x0314>;
@@ -837,12 +939,14 @@
 	auxclk1_src_ck: auxclk1_src_ck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
+		clock-output-names = "auxclk1_src_ck";
 		clocks = <&auxclk1_src_gate_ck>, <&auxclk1_src_mux_ck>;
 	};
 
 	auxclk1_ck: auxclk1_ck@314 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "auxclk1_ck";
 		clocks = <&auxclk1_src_ck>;
 		ti,bit-shift = <16>;
 		ti,max-div = <16>;
@@ -852,6 +956,7 @@
 	auxclk2_src_gate_ck: auxclk2_src_gate_ck@318 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
+		clock-output-names = "auxclk2_src_gate_ck";
 		clocks = <&dpll_core_m3x2_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0318>;
@@ -860,6 +965,7 @@
 	auxclk2_src_mux_ck: auxclk2_src_mux_ck@318 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
+		clock-output-names = "auxclk2_src_mux_ck";
 		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
 		ti,bit-shift = <1>;
 		reg = <0x0318>;
@@ -868,12 +974,14 @@
 	auxclk2_src_ck: auxclk2_src_ck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
+		clock-output-names = "auxclk2_src_ck";
 		clocks = <&auxclk2_src_gate_ck>, <&auxclk2_src_mux_ck>;
 	};
 
 	auxclk2_ck: auxclk2_ck@318 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "auxclk2_ck";
 		clocks = <&auxclk2_src_ck>;
 		ti,bit-shift = <16>;
 		ti,max-div = <16>;
@@ -883,6 +991,7 @@
 	auxclk3_src_gate_ck: auxclk3_src_gate_ck@31c {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
+		clock-output-names = "auxclk3_src_gate_ck";
 		clocks = <&dpll_core_m3x2_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x031c>;
@@ -891,6 +1000,7 @@
 	auxclk3_src_mux_ck: auxclk3_src_mux_ck@31c {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
+		clock-output-names = "auxclk3_src_mux_ck";
 		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
 		ti,bit-shift = <1>;
 		reg = <0x031c>;
@@ -899,12 +1009,14 @@
 	auxclk3_src_ck: auxclk3_src_ck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
+		clock-output-names = "auxclk3_src_ck";
 		clocks = <&auxclk3_src_gate_ck>, <&auxclk3_src_mux_ck>;
 	};
 
 	auxclk3_ck: auxclk3_ck@31c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "auxclk3_ck";
 		clocks = <&auxclk3_src_ck>;
 		ti,bit-shift = <16>;
 		ti,max-div = <16>;
@@ -914,6 +1026,7 @@
 	auxclk4_src_gate_ck: auxclk4_src_gate_ck@320 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
+		clock-output-names = "auxclk4_src_gate_ck";
 		clocks = <&dpll_core_m3x2_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0320>;
@@ -922,6 +1035,7 @@
 	auxclk4_src_mux_ck: auxclk4_src_mux_ck@320 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
+		clock-output-names = "auxclk4_src_mux_ck";
 		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
 		ti,bit-shift = <1>;
 		reg = <0x0320>;
@@ -930,12 +1044,14 @@
 	auxclk4_src_ck: auxclk4_src_ck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
+		clock-output-names = "auxclk4_src_ck";
 		clocks = <&auxclk4_src_gate_ck>, <&auxclk4_src_mux_ck>;
 	};
 
 	auxclk4_ck: auxclk4_ck@320 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "auxclk4_ck";
 		clocks = <&auxclk4_src_ck>;
 		ti,bit-shift = <16>;
 		ti,max-div = <16>;
@@ -945,6 +1061,7 @@
 	auxclk5_src_gate_ck: auxclk5_src_gate_ck@324 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
+		clock-output-names = "auxclk5_src_gate_ck";
 		clocks = <&dpll_core_m3x2_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0324>;
@@ -953,6 +1070,7 @@
 	auxclk5_src_mux_ck: auxclk5_src_mux_ck@324 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
+		clock-output-names = "auxclk5_src_mux_ck";
 		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
 		ti,bit-shift = <1>;
 		reg = <0x0324>;
@@ -961,12 +1079,14 @@
 	auxclk5_src_ck: auxclk5_src_ck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
+		clock-output-names = "auxclk5_src_ck";
 		clocks = <&auxclk5_src_gate_ck>, <&auxclk5_src_mux_ck>;
 	};
 
 	auxclk5_ck: auxclk5_ck@324 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "auxclk5_ck";
 		clocks = <&auxclk5_src_ck>;
 		ti,bit-shift = <16>;
 		ti,max-div = <16>;
@@ -976,6 +1096,7 @@
 	auxclkreq0_ck: auxclkreq0_ck@210 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "auxclkreq0_ck";
 		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
 		ti,bit-shift = <2>;
 		reg = <0x0210>;
@@ -984,6 +1105,7 @@
 	auxclkreq1_ck: auxclkreq1_ck@214 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "auxclkreq1_ck";
 		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
 		ti,bit-shift = <2>;
 		reg = <0x0214>;
@@ -992,6 +1114,7 @@
 	auxclkreq2_ck: auxclkreq2_ck@218 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "auxclkreq2_ck";
 		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
 		ti,bit-shift = <2>;
 		reg = <0x0218>;
@@ -1000,6 +1123,7 @@
 	auxclkreq3_ck: auxclkreq3_ck@21c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "auxclkreq3_ck";
 		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
 		ti,bit-shift = <2>;
 		reg = <0x021c>;
@@ -1008,6 +1132,7 @@
 	auxclkreq4_ck: auxclkreq4_ck@220 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "auxclkreq4_ck";
 		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
 		ti,bit-shift = <2>;
 		reg = <0x0220>;
@@ -1016,6 +1141,7 @@
 	auxclkreq5_ck: auxclkreq5_ck@224 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "auxclkreq5_ck";
 		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
 		ti,bit-shift = <2>;
 		reg = <0x0224>;
@@ -1025,6 +1151,7 @@
 &cm1 {
 	mpuss_cm: mpuss_cm@300 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "mpuss_cm";
 		reg = <0x300 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1032,6 +1159,7 @@
 
 		mpuss_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "mpuss_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
@@ -1039,6 +1167,7 @@
 
 	tesla_cm: tesla_cm@400 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "tesla_cm";
 		reg = <0x400 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1046,6 +1175,7 @@
 
 		tesla_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "tesla_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
@@ -1053,6 +1183,7 @@
 
 	abe_cm: abe_cm@500 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "abe_cm";
 		reg = <0x500 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1060,6 +1191,7 @@
 
 		abe_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "abe_clkctrl";
 			reg = <0x20 0x6c>;
 			#clock-cells = <2>;
 		};
@@ -1070,6 +1202,7 @@
 &cm2 {
 	l4_ao_cm: l4_ao_cm@600 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l4_ao_cm";
 		reg = <0x600 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1077,6 +1210,7 @@
 
 		l4_ao_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l4_ao_clkctrl";
 			reg = <0x20 0x1c>;
 			#clock-cells = <2>;
 		};
@@ -1084,6 +1218,7 @@
 
 	l3_1_cm: l3_1_cm@700 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l3_1_cm";
 		reg = <0x700 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1091,6 +1226,7 @@
 
 		l3_1_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3_1_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
@@ -1098,6 +1234,7 @@
 
 	l3_2_cm: l3_2_cm@800 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l3_2_cm";
 		reg = <0x800 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1105,6 +1242,7 @@
 
 		l3_2_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3_2_clkctrl";
 			reg = <0x20 0x14>;
 			#clock-cells = <2>;
 		};
@@ -1112,6 +1250,7 @@
 
 	ducati_cm: ducati_cm@900 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "ducati_cm";
 		reg = <0x900 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1119,6 +1258,7 @@
 
 		ducati_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "ducati_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
@@ -1126,6 +1266,7 @@
 
 	l3_dma_cm: l3_dma_cm@a00 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l3_dma_cm";
 		reg = <0xa00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1133,6 +1274,7 @@
 
 		l3_dma_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3_dma_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
@@ -1140,6 +1282,7 @@
 
 	l3_emif_cm: l3_emif_cm@b00 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l3_emif_cm";
 		reg = <0xb00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1147,6 +1290,7 @@
 
 		l3_emif_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3_emif_clkctrl";
 			reg = <0x20 0x1c>;
 			#clock-cells = <2>;
 		};
@@ -1154,6 +1298,7 @@
 
 	d2d_cm: d2d_cm@c00 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "d2d_cm";
 		reg = <0xc00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1161,6 +1306,7 @@
 
 		d2d_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "d2d_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
@@ -1168,6 +1314,7 @@
 
 	l4_cfg_cm: l4_cfg_cm@d00 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l4_cfg_cm";
 		reg = <0xd00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1175,6 +1322,7 @@
 
 		l4_cfg_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l4_cfg_clkctrl";
 			reg = <0x20 0x14>;
 			#clock-cells = <2>;
 		};
@@ -1182,6 +1330,7 @@
 
 	l3_instr_cm: l3_instr_cm@e00 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l3_instr_cm";
 		reg = <0xe00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1189,6 +1338,7 @@
 
 		l3_instr_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3_instr_clkctrl";
 			reg = <0x20 0x24>;
 			#clock-cells = <2>;
 		};
@@ -1196,6 +1346,7 @@
 
 	ivahd_cm: ivahd_cm@f00 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "ivahd_cm";
 		reg = <0xf00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1203,6 +1354,7 @@
 
 		ivahd_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "ivahd_clkctrl";
 			reg = <0x20 0xc>;
 			#clock-cells = <2>;
 		};
@@ -1210,6 +1362,7 @@
 
 	iss_cm: iss_cm@1000 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "iss_cm";
 		reg = <0x1000 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1217,6 +1370,7 @@
 
 		iss_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "iss_clkctrl";
 			reg = <0x20 0xc>;
 			#clock-cells = <2>;
 		};
@@ -1224,6 +1378,7 @@
 
 	l3_dss_cm: l3_dss_cm@1100 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l3_dss_cm";
 		reg = <0x1100 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1231,6 +1386,7 @@
 
 		l3_dss_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3_dss_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
@@ -1238,6 +1394,7 @@
 
 	l3_gfx_cm: l3_gfx_cm@1200 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l3_gfx_cm";
 		reg = <0x1200 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1245,6 +1402,7 @@
 
 		l3_gfx_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3_gfx_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
@@ -1252,6 +1410,7 @@
 
 	l3_init_cm: l3_init_cm@1300 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l3_init_cm";
 		reg = <0x1300 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1259,26 +1418,30 @@
 
 		l3_init_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3_init_clkctrl";
 			reg = <0x20 0xc4>;
 			#clock-cells = <2>;
 		};
 	};
 
-	l4_per_cm: l4_per_cm@1400 {
+	l4_per_cm: clock@1400 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l4_per_cm";
 		reg = <0x1400 0x200>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x1400 0x200>;
 
 		l4_per_clkctrl: clock@20 {
-			compatible = "ti,clkctrl-l4-per", "ti,clkctrl";
+			compatible = "ti,clkctrl";
+			clock-output-names = "l4_per_clkctrl";
 			reg = <0x20 0x144>;
 			#clock-cells = <2>;
 		};
 
 		l4_secure_clkctrl: clock@1a0 {
-			compatible = "ti,clkctrl-l4-secure", "ti,clkctrl";
+			compatible = "ti,clkctrl";
+			clock-output-names = "l4_secure_clkctrl";
 			reg = <0x1a0 0x3c>;
 			#clock-cells = <2>;
 		};
@@ -1288,6 +1451,7 @@
 &prm {
 	l4_wkup_cm: l4_wkup_cm@1800 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l4_wkup_cm";
 		reg = <0x1800 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1295,6 +1459,7 @@
 
 		l4_wkup_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l4_wkup_clkctrl";
 			reg = <0x20 0x5c>;
 			#clock-cells = <2>;
 		};
@@ -1302,6 +1467,7 @@
 
 	emu_sys_cm: emu_sys_cm@1a00 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "emu_sys_cm";
 		reg = <0x1a00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1309,6 +1475,7 @@
 
 		emu_sys_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "emu_sys_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
diff --git a/arch/arm/boot/dts/omap5-core-thermal.dtsi b/arch/arm/boot/dts/omap5-core-thermal.dtsi
index 02e76338bfbc..e0d8e39a0014 100644
--- a/arch/arm/boot/dts/omap5-core-thermal.dtsi
+++ b/arch/arm/boot/dts/omap5-core-thermal.dtsi
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for OMAP543x SoC CORE thermal
  *
  * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
  * Contact: Eduardo Valentin <eduardo.valentin@ti.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/thermal/thermal.h>
diff --git a/arch/arm/boot/dts/omap5-gpu-thermal.dtsi b/arch/arm/boot/dts/omap5-gpu-thermal.dtsi
index bf8fa9372e57..1b4b7d9136c8 100644
--- a/arch/arm/boot/dts/omap5-gpu-thermal.dtsi
+++ b/arch/arm/boot/dts/omap5-gpu-thermal.dtsi
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for OMAP543x SoC GPU thermal
  *
  * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
  * Contact: Eduardo Valentin <eduardo.valentin@ti.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/thermal/thermal.h>
diff --git a/arch/arm/boot/dts/omap5-igep0050.dts b/arch/arm/boot/dts/omap5-igep0050.dts
index 76e499d89d24..3851120857d7 100644
--- a/arch/arm/boot/dts/omap5-igep0050.dts
+++ b/arch/arm/boot/dts/omap5-igep0050.dts
@@ -128,7 +128,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ethernet: usbether@3 {
+		ethernet: ethernet@3 {
 			compatible = "usb424,7500";
 			reg = <3>;
 		};
diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi
index 06cc3a19ddaa..3b505fe415ed 100644
--- a/arch/arm/boot/dts/omap5-l4.dtsi
+++ b/arch/arm/boot/dts/omap5-l4.dtsi
@@ -482,7 +482,7 @@
 				clocks = <&usb_phy_cm_clk32k>,
 				<&sys_clkin>,
 				<&l3init_clkctrl OMAP5_USB_OTG_SS_CLKCTRL 8>;
-				clock-names =	"wkupclk",
+				clock-names = "wkupclk",
 				"sysclk",
 				"refclk";
 				#phy-cells = <0>;
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 51d5fcae5081..453da9f18a99 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -209,7 +209,7 @@
 		#size-cells = <0>;
 	};
 
-	ethernet: usbether@3 {
+	ethernet: ethernet@3 {
 		compatible = "usb424,9730";
 		reg = <3>;
 	};
diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi
index 42f2c447727d..5cf3b0e78c15 100644
--- a/arch/arm/boot/dts/omap54xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi
@@ -8,12 +8,14 @@
 	pad_clks_src_ck: pad_clks_src_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "pad_clks_src_ck";
 		clock-frequency = <12000000>;
 	};
 
 	pad_clks_ck: pad_clks_ck@108 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "pad_clks_ck";
 		clocks = <&pad_clks_src_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0108>;
@@ -22,18 +24,21 @@
 	secure_32k_clk_src_ck: secure_32k_clk_src_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "secure_32k_clk_src_ck";
 		clock-frequency = <32768>;
 	};
 
 	slimbus_src_clk: slimbus_src_clk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "slimbus_src_clk";
 		clock-frequency = <12000000>;
 	};
 
 	slimbus_clk: slimbus_clk@108 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "slimbus_clk";
 		clocks = <&slimbus_src_clk>;
 		ti,bit-shift = <10>;
 		reg = <0x0108>;
@@ -42,66 +47,77 @@
 	sys_32k_ck: sys_32k_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "sys_32k_ck";
 		clock-frequency = <32768>;
 	};
 
 	virt_12000000_ck: virt_12000000_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_12000000_ck";
 		clock-frequency = <12000000>;
 	};
 
 	virt_13000000_ck: virt_13000000_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_13000000_ck";
 		clock-frequency = <13000000>;
 	};
 
 	virt_16800000_ck: virt_16800000_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_16800000_ck";
 		clock-frequency = <16800000>;
 	};
 
 	virt_19200000_ck: virt_19200000_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_19200000_ck";
 		clock-frequency = <19200000>;
 	};
 
 	virt_26000000_ck: virt_26000000_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_26000000_ck";
 		clock-frequency = <26000000>;
 	};
 
 	virt_27000000_ck: virt_27000000_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_27000000_ck";
 		clock-frequency = <27000000>;
 	};
 
 	virt_38400000_ck: virt_38400000_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_38400000_ck";
 		clock-frequency = <38400000>;
 	};
 
 	xclk60mhsp1_ck: xclk60mhsp1_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "xclk60mhsp1_ck";
 		clock-frequency = <60000000>;
 	};
 
 	xclk60mhsp2_ck: xclk60mhsp2_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "xclk60mhsp2_ck";
 		clock-frequency = <60000000>;
 	};
 
 	dpll_abe_ck: dpll_abe_ck@1e0 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-m4xen-clock";
+		clock-output-names = "dpll_abe_ck";
 		clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>;
 		reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
 	};
@@ -109,12 +125,14 @@
 	dpll_abe_x2_ck: dpll_abe_x2_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-x2-clock";
+		clock-output-names = "dpll_abe_x2_ck";
 		clocks = <&dpll_abe_ck>;
 	};
 
 	dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_abe_m2x2_ck";
 		clocks = <&dpll_abe_x2_ck>;
 		ti,max-div = <31>;
 		reg = <0x01f0>;
@@ -124,6 +142,7 @@
 	abe_24m_fclk: abe_24m_fclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "abe_24m_fclk";
 		clocks = <&dpll_abe_m2x2_ck>;
 		clock-mult = <1>;
 		clock-div = <8>;
@@ -132,6 +151,7 @@
 	abe_clk: abe_clk@108 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "abe_clk";
 		clocks = <&dpll_abe_m2x2_ck>;
 		ti,max-div = <4>;
 		reg = <0x0108>;
@@ -141,6 +161,7 @@
 	abe_iclk: abe_iclk@528 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "abe_iclk";
 		clocks = <&aess_fclk>;
 		ti,bit-shift = <24>;
 		reg = <0x0528>;
@@ -150,6 +171,7 @@
 	abe_lp_clk_div: abe_lp_clk_div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "abe_lp_clk_div";
 		clocks = <&dpll_abe_m2x2_ck>;
 		clock-mult = <1>;
 		clock-div = <16>;
@@ -158,6 +180,7 @@
 	dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_abe_m3x2_ck";
 		clocks = <&dpll_abe_x2_ck>;
 		ti,max-div = <31>;
 		reg = <0x01f4>;
@@ -167,6 +190,7 @@
 	dpll_core_byp_mux: dpll_core_byp_mux@12c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "dpll_core_byp_mux";
 		clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>;
 		ti,bit-shift = <23>;
 		reg = <0x012c>;
@@ -175,6 +199,7 @@
 	dpll_core_ck: dpll_core_ck@120 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-core-clock";
+		clock-output-names = "dpll_core_ck";
 		clocks = <&sys_clkin>, <&dpll_core_byp_mux>;
 		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
 	};
@@ -182,12 +207,14 @@
 	dpll_core_x2_ck: dpll_core_x2_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-x2-clock";
+		clock-output-names = "dpll_core_x2_ck";
 		clocks = <&dpll_core_ck>;
 	};
 
 	dpll_core_h21x2_ck: dpll_core_h21x2_ck@150 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_h21x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <63>;
 		reg = <0x0150>;
@@ -197,6 +224,7 @@
 	c2c_fclk: c2c_fclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "c2c_fclk";
 		clocks = <&dpll_core_h21x2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
@@ -205,6 +233,7 @@
 	c2c_iclk: c2c_iclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "c2c_iclk";
 		clocks = <&c2c_fclk>;
 		clock-mult = <1>;
 		clock-div = <2>;
@@ -213,6 +242,7 @@
 	dpll_core_h11x2_ck: dpll_core_h11x2_ck@138 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_h11x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <63>;
 		reg = <0x0138>;
@@ -222,6 +252,7 @@
 	dpll_core_h12x2_ck: dpll_core_h12x2_ck@13c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_h12x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <63>;
 		reg = <0x013c>;
@@ -231,6 +262,7 @@
 	dpll_core_h13x2_ck: dpll_core_h13x2_ck@140 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_h13x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <63>;
 		reg = <0x0140>;
@@ -240,6 +272,7 @@
 	dpll_core_h14x2_ck: dpll_core_h14x2_ck@144 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_h14x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <63>;
 		reg = <0x0144>;
@@ -249,6 +282,7 @@
 	dpll_core_h22x2_ck: dpll_core_h22x2_ck@154 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_h22x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <63>;
 		reg = <0x0154>;
@@ -258,6 +292,7 @@
 	dpll_core_h23x2_ck: dpll_core_h23x2_ck@158 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_h23x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <63>;
 		reg = <0x0158>;
@@ -267,6 +302,7 @@
 	dpll_core_h24x2_ck: dpll_core_h24x2_ck@15c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_h24x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <63>;
 		reg = <0x015c>;
@@ -276,6 +312,7 @@
 	dpll_core_m2_ck: dpll_core_m2_ck@130 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_m2_ck";
 		clocks = <&dpll_core_ck>;
 		ti,max-div = <31>;
 		reg = <0x0130>;
@@ -285,6 +322,7 @@
 	dpll_core_m3x2_ck: dpll_core_m3x2_ck@134 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_m3x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <31>;
 		reg = <0x0134>;
@@ -294,6 +332,7 @@
 	iva_dpll_hs_clk_div: iva_dpll_hs_clk_div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "iva_dpll_hs_clk_div";
 		clocks = <&dpll_core_h12x2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
@@ -302,6 +341,7 @@
 	dpll_iva_byp_mux: dpll_iva_byp_mux@1ac {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "dpll_iva_byp_mux";
 		clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>;
 		ti,bit-shift = <23>;
 		reg = <0x01ac>;
@@ -310,6 +350,7 @@
 	dpll_iva_ck: dpll_iva_ck@1a0 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
+		clock-output-names = "dpll_iva_ck";
 		clocks = <&sys_clkin>, <&dpll_iva_byp_mux>;
 		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
 		assigned-clocks = <&dpll_iva_ck>;
@@ -319,12 +360,14 @@
 	dpll_iva_x2_ck: dpll_iva_x2_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-x2-clock";
+		clock-output-names = "dpll_iva_x2_ck";
 		clocks = <&dpll_iva_ck>;
 	};
 
 	dpll_iva_h11x2_ck: dpll_iva_h11x2_ck@1b8 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_iva_h11x2_ck";
 		clocks = <&dpll_iva_x2_ck>;
 		ti,max-div = <63>;
 		reg = <0x01b8>;
@@ -336,6 +379,7 @@
 	dpll_iva_h12x2_ck: dpll_iva_h12x2_ck@1bc {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_iva_h12x2_ck";
 		clocks = <&dpll_iva_x2_ck>;
 		ti,max-div = <63>;
 		reg = <0x01bc>;
@@ -347,6 +391,7 @@
 	mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "mpu_dpll_hs_clk_div";
 		clocks = <&dpll_core_h12x2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
@@ -355,6 +400,7 @@
 	dpll_mpu_ck: dpll_mpu_ck@160 {
 		#clock-cells = <0>;
 		compatible = "ti,omap5-mpu-dpll-clock";
+		clock-output-names = "dpll_mpu_ck";
 		clocks = <&sys_clkin>, <&mpu_dpll_hs_clk_div>;
 		reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
 	};
@@ -362,6 +408,7 @@
 	dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_mpu_m2_ck";
 		clocks = <&dpll_mpu_ck>;
 		ti,max-div = <31>;
 		reg = <0x0170>;
@@ -371,6 +418,7 @@
 	per_dpll_hs_clk_div: per_dpll_hs_clk_div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "per_dpll_hs_clk_div";
 		clocks = <&dpll_abe_m3x2_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
@@ -379,6 +427,7 @@
 	usb_dpll_hs_clk_div: usb_dpll_hs_clk_div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "usb_dpll_hs_clk_div";
 		clocks = <&dpll_abe_m3x2_ck>;
 		clock-mult = <1>;
 		clock-div = <3>;
@@ -387,6 +436,7 @@
 	l3_iclk_div: l3_iclk_div@100 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "l3_iclk_div";
 		ti,max-div = <2>;
 		ti,bit-shift = <4>;
 		reg = <0x100>;
@@ -397,6 +447,7 @@
 	gpu_l3_iclk: gpu_l3_iclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "gpu_l3_iclk";
 		clocks = <&l3_iclk_div>;
 		clock-mult = <1>;
 		clock-div = <1>;
@@ -405,6 +456,7 @@
 	l4_root_clk_div: l4_root_clk_div@100 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "l4_root_clk_div";
 		ti,max-div = <2>;
 		ti,bit-shift = <8>;
 		reg = <0x100>;
@@ -415,6 +467,7 @@
 	slimbus1_slimbus_clk: slimbus1_slimbus_clk@560 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "slimbus1_slimbus_clk";
 		clocks = <&slimbus_clk>;
 		ti,bit-shift = <11>;
 		reg = <0x0560>;
@@ -423,6 +476,7 @@
 	aess_fclk: aess_fclk@528 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "aess_fclk";
 		clocks = <&abe_clk>;
 		ti,bit-shift = <24>;
 		ti,max-div = <2>;
@@ -432,6 +486,7 @@
 	mcasp_sync_mux_ck: mcasp_sync_mux_ck@540 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "mcasp_sync_mux_ck";
 		clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>;
 		ti,bit-shift = <26>;
 		reg = <0x0540>;
@@ -440,6 +495,7 @@
 	mcasp_gfclk: mcasp_gfclk@540 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "mcasp_gfclk";
 		clocks = <&mcasp_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
 		ti,bit-shift = <24>;
 		reg = <0x0540>;
@@ -448,6 +504,7 @@
 	dummy_ck: dummy_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "dummy_ck";
 		clock-frequency = <0>;
 	};
 };
@@ -455,6 +512,7 @@
 	sys_clkin: sys_clkin@110 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "sys_clkin";
 		clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
 		reg = <0x0110>;
 		ti,index-starts-at-one;
@@ -463,6 +521,7 @@
 	abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux@108 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "abe_dpll_bypass_clk_mux";
 		clocks = <&sys_clkin>, <&sys_32k_ck>;
 		reg = <0x0108>;
 	};
@@ -470,6 +529,7 @@
 	abe_dpll_clk_mux: abe_dpll_clk_mux@10c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "abe_dpll_clk_mux";
 		clocks = <&sys_clkin>, <&sys_32k_ck>;
 		reg = <0x010c>;
 	};
@@ -477,6 +537,7 @@
 	custefuse_sys_gfclk_div: custefuse_sys_gfclk_div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "custefuse_sys_gfclk_div";
 		clocks = <&sys_clkin>;
 		clock-mult = <1>;
 		clock-div = <2>;
@@ -485,6 +546,7 @@
 	dss_syc_gfclk_div: dss_syc_gfclk_div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dss_syc_gfclk_div";
 		clocks = <&sys_clkin>;
 		clock-mult = <1>;
 		clock-div = <1>;
@@ -493,6 +555,7 @@
 	wkupaon_iclk_mux: wkupaon_iclk_mux@108 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "wkupaon_iclk_mux";
 		clocks = <&sys_clkin>, <&abe_lp_clk_div>;
 		reg = <0x0108>;
 	};
@@ -500,6 +563,7 @@
 	l3instr_ts_gclk_div: l3instr_ts_gclk_div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "l3instr_ts_gclk_div";
 		clocks = <&wkupaon_iclk_mux>;
 		clock-mult = <1>;
 		clock-div = <1>;
@@ -511,6 +575,7 @@
 	dpll_per_byp_mux: dpll_per_byp_mux@14c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "dpll_per_byp_mux";
 		clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>;
 		ti,bit-shift = <23>;
 		reg = <0x014c>;
@@ -519,6 +584,7 @@
 	dpll_per_ck: dpll_per_ck@140 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
+		clock-output-names = "dpll_per_ck";
 		clocks = <&sys_clkin>, <&dpll_per_byp_mux>;
 		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
 	};
@@ -526,12 +592,14 @@
 	dpll_per_x2_ck: dpll_per_x2_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-x2-clock";
+		clock-output-names = "dpll_per_x2_ck";
 		clocks = <&dpll_per_ck>;
 	};
 
 	dpll_per_h11x2_ck: dpll_per_h11x2_ck@158 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_h11x2_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <63>;
 		reg = <0x0158>;
@@ -541,6 +609,7 @@
 	dpll_per_h12x2_ck: dpll_per_h12x2_ck@15c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_h12x2_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <63>;
 		reg = <0x015c>;
@@ -550,6 +619,7 @@
 	dpll_per_h14x2_ck: dpll_per_h14x2_ck@164 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_h14x2_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <63>;
 		reg = <0x0164>;
@@ -559,6 +629,7 @@
 	dpll_per_m2_ck: dpll_per_m2_ck@150 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_m2_ck";
 		clocks = <&dpll_per_ck>;
 		ti,max-div = <31>;
 		reg = <0x0150>;
@@ -568,6 +639,7 @@
 	dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_m2x2_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <31>;
 		reg = <0x0150>;
@@ -577,6 +649,7 @@
 	dpll_per_m3x2_ck: dpll_per_m3x2_ck@154 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_m3x2_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <31>;
 		reg = <0x0154>;
@@ -586,6 +659,7 @@
 	dpll_unipro1_ck: dpll_unipro1_ck@200 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
+		clock-output-names = "dpll_unipro1_ck";
 		clocks = <&sys_clkin>, <&sys_clkin>;
 		reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>;
 	};
@@ -593,6 +667,7 @@
 	dpll_unipro1_clkdcoldo: dpll_unipro1_clkdcoldo {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dpll_unipro1_clkdcoldo";
 		clocks = <&dpll_unipro1_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
@@ -601,6 +676,7 @@
 	dpll_unipro1_m2_ck: dpll_unipro1_m2_ck@210 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_unipro1_m2_ck";
 		clocks = <&dpll_unipro1_ck>;
 		ti,max-div = <127>;
 		reg = <0x0210>;
@@ -610,6 +686,7 @@
 	dpll_unipro2_ck: dpll_unipro2_ck@1c0 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
+		clock-output-names = "dpll_unipro2_ck";
 		clocks = <&sys_clkin>, <&sys_clkin>;
 		reg = <0x01c0>, <0x01c4>, <0x01cc>, <0x01c8>;
 	};
@@ -617,6 +694,7 @@
 	dpll_unipro2_clkdcoldo: dpll_unipro2_clkdcoldo {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dpll_unipro2_clkdcoldo";
 		clocks = <&dpll_unipro2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
@@ -625,6 +703,7 @@
 	dpll_unipro2_m2_ck: dpll_unipro2_m2_ck@1d0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_unipro2_m2_ck";
 		clocks = <&dpll_unipro2_ck>;
 		ti,max-div = <127>;
 		reg = <0x01d0>;
@@ -634,6 +713,7 @@
 	dpll_usb_byp_mux: dpll_usb_byp_mux@18c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "dpll_usb_byp_mux";
 		clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>;
 		ti,bit-shift = <23>;
 		reg = <0x018c>;
@@ -642,6 +722,7 @@
 	dpll_usb_ck: dpll_usb_ck@180 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-j-type-clock";
+		clock-output-names = "dpll_usb_ck";
 		clocks = <&sys_clkin>, <&dpll_usb_byp_mux>;
 		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
 	};
@@ -649,6 +730,7 @@
 	dpll_usb_clkdcoldo: dpll_usb_clkdcoldo {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dpll_usb_clkdcoldo";
 		clocks = <&dpll_usb_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
@@ -657,6 +739,7 @@
 	dpll_usb_m2_ck: dpll_usb_m2_ck@190 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_usb_m2_ck";
 		clocks = <&dpll_usb_ck>;
 		ti,max-div = <127>;
 		reg = <0x0190>;
@@ -666,6 +749,7 @@
 	func_128m_clk: func_128m_clk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "func_128m_clk";
 		clocks = <&dpll_per_h11x2_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
@@ -674,6 +758,7 @@
 	func_12m_fclk: func_12m_fclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "func_12m_fclk";
 		clocks = <&dpll_per_m2x2_ck>;
 		clock-mult = <1>;
 		clock-div = <16>;
@@ -682,6 +767,7 @@
 	func_24m_clk: func_24m_clk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "func_24m_clk";
 		clocks = <&dpll_per_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <4>;
@@ -690,6 +776,7 @@
 	func_48m_fclk: func_48m_fclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "func_48m_fclk";
 		clocks = <&dpll_per_m2x2_ck>;
 		clock-mult = <1>;
 		clock-div = <4>;
@@ -698,6 +785,7 @@
 	func_96m_fclk: func_96m_fclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "func_96m_fclk";
 		clocks = <&dpll_per_m2x2_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
@@ -706,6 +794,7 @@
 	l3init_60m_fclk: l3init_60m_fclk@104 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "l3init_60m_fclk";
 		clocks = <&dpll_usb_m2_ck>;
 		reg = <0x0104>;
 		ti,dividers = <1>, <8>;
@@ -714,6 +803,7 @@
 	iss_ctrlclk: iss_ctrlclk@1320 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "iss_ctrlclk";
 		clocks = <&func_96m_fclk>;
 		ti,bit-shift = <8>;
 		reg = <0x1320>;
@@ -722,6 +812,7 @@
 	lli_txphy_clk: lli_txphy_clk@f20 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "lli_txphy_clk";
 		clocks = <&dpll_unipro1_clkdcoldo>;
 		ti,bit-shift = <8>;
 		reg = <0x0f20>;
@@ -730,6 +821,7 @@
 	lli_txphy_ls_clk: lli_txphy_ls_clk@f20 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "lli_txphy_ls_clk";
 		clocks = <&dpll_unipro1_m2_ck>;
 		ti,bit-shift = <9>;
 		reg = <0x0f20>;
@@ -738,6 +830,7 @@
 	usb_phy_cm_clk32k: usb_phy_cm_clk32k@640 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "usb_phy_cm_clk32k";
 		clocks = <&sys_32k_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0640>;
@@ -746,6 +839,7 @@
 	fdif_fclk: fdif_fclk@1328 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "fdif_fclk";
 		clocks = <&dpll_per_h11x2_ck>;
 		ti,bit-shift = <24>;
 		ti,max-div = <2>;
@@ -755,6 +849,7 @@
 	gpu_core_gclk_mux: gpu_core_gclk_mux@1520 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "gpu_core_gclk_mux";
 		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>;
 		ti,bit-shift = <24>;
 		reg = <0x1520>;
@@ -763,6 +858,7 @@
 	gpu_hyd_gclk_mux: gpu_hyd_gclk_mux@1520 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "gpu_hyd_gclk_mux";
 		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>;
 		ti,bit-shift = <25>;
 		reg = <0x1520>;
@@ -771,6 +867,7 @@
 	hsi_fclk: hsi_fclk@1638 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "hsi_fclk";
 		clocks = <&dpll_per_m2x2_ck>;
 		ti,bit-shift = <24>;
 		ti,max-div = <2>;
@@ -781,6 +878,7 @@
 &cm_core_clockdomains {
 	l3init_clkdm: l3init_clkdm {
 		compatible = "ti,clockdomain";
+		clock-output-names = "l3init_clkdm";
 		clocks = <&dpll_usb_ck>;
 	};
 };
@@ -789,6 +887,7 @@
 	auxclk0_src_gate_ck: auxclk0_src_gate_ck@310 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
+		clock-output-names = "auxclk0_src_gate_ck";
 		clocks = <&dpll_core_m3x2_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0310>;
@@ -797,6 +896,7 @@
 	auxclk0_src_mux_ck: auxclk0_src_mux_ck@310 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
+		clock-output-names = "auxclk0_src_mux_ck";
 		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
 		ti,bit-shift = <1>;
 		reg = <0x0310>;
@@ -805,12 +905,14 @@
 	auxclk0_src_ck: auxclk0_src_ck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
+		clock-output-names = "auxclk0_src_ck";
 		clocks = <&auxclk0_src_gate_ck>, <&auxclk0_src_mux_ck>;
 	};
 
 	auxclk0_ck: auxclk0_ck@310 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "auxclk0_ck";
 		clocks = <&auxclk0_src_ck>;
 		ti,bit-shift = <16>;
 		ti,max-div = <16>;
@@ -820,6 +922,7 @@
 	auxclk1_src_gate_ck: auxclk1_src_gate_ck@314 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
+		clock-output-names = "auxclk1_src_gate_ck";
 		clocks = <&dpll_core_m3x2_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0314>;
@@ -828,6 +931,7 @@
 	auxclk1_src_mux_ck: auxclk1_src_mux_ck@314 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
+		clock-output-names = "auxclk1_src_mux_ck";
 		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
 		ti,bit-shift = <1>;
 		reg = <0x0314>;
@@ -836,12 +940,14 @@
 	auxclk1_src_ck: auxclk1_src_ck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
+		clock-output-names = "auxclk1_src_ck";
 		clocks = <&auxclk1_src_gate_ck>, <&auxclk1_src_mux_ck>;
 	};
 
 	auxclk1_ck: auxclk1_ck@314 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "auxclk1_ck";
 		clocks = <&auxclk1_src_ck>;
 		ti,bit-shift = <16>;
 		ti,max-div = <16>;
@@ -851,6 +957,7 @@
 	auxclk2_src_gate_ck: auxclk2_src_gate_ck@318 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
+		clock-output-names = "auxclk2_src_gate_ck";
 		clocks = <&dpll_core_m3x2_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0318>;
@@ -859,6 +966,7 @@
 	auxclk2_src_mux_ck: auxclk2_src_mux_ck@318 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
+		clock-output-names = "auxclk2_src_mux_ck";
 		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
 		ti,bit-shift = <1>;
 		reg = <0x0318>;
@@ -867,12 +975,14 @@
 	auxclk2_src_ck: auxclk2_src_ck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
+		clock-output-names = "auxclk2_src_ck";
 		clocks = <&auxclk2_src_gate_ck>, <&auxclk2_src_mux_ck>;
 	};
 
 	auxclk2_ck: auxclk2_ck@318 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "auxclk2_ck";
 		clocks = <&auxclk2_src_ck>;
 		ti,bit-shift = <16>;
 		ti,max-div = <16>;
@@ -882,6 +992,7 @@
 	auxclk3_src_gate_ck: auxclk3_src_gate_ck@31c {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
+		clock-output-names = "auxclk3_src_gate_ck";
 		clocks = <&dpll_core_m3x2_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x031c>;
@@ -890,6 +1001,7 @@
 	auxclk3_src_mux_ck: auxclk3_src_mux_ck@31c {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
+		clock-output-names = "auxclk3_src_mux_ck";
 		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
 		ti,bit-shift = <1>;
 		reg = <0x031c>;
@@ -898,12 +1010,14 @@
 	auxclk3_src_ck: auxclk3_src_ck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
+		clock-output-names = "auxclk3_src_ck";
 		clocks = <&auxclk3_src_gate_ck>, <&auxclk3_src_mux_ck>;
 	};
 
 	auxclk3_ck: auxclk3_ck@31c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "auxclk3_ck";
 		clocks = <&auxclk3_src_ck>;
 		ti,bit-shift = <16>;
 		ti,max-div = <16>;
@@ -913,6 +1027,7 @@
 	auxclk4_src_gate_ck: auxclk4_src_gate_ck@320 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
+		clock-output-names = "auxclk4_src_gate_ck";
 		clocks = <&dpll_core_m3x2_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0320>;
@@ -921,6 +1036,7 @@
 	auxclk4_src_mux_ck: auxclk4_src_mux_ck@320 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
+		clock-output-names = "auxclk4_src_mux_ck";
 		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
 		ti,bit-shift = <1>;
 		reg = <0x0320>;
@@ -929,12 +1045,14 @@
 	auxclk4_src_ck: auxclk4_src_ck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
+		clock-output-names = "auxclk4_src_ck";
 		clocks = <&auxclk4_src_gate_ck>, <&auxclk4_src_mux_ck>;
 	};
 
 	auxclk4_ck: auxclk4_ck@320 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "auxclk4_ck";
 		clocks = <&auxclk4_src_ck>;
 		ti,bit-shift = <16>;
 		ti,max-div = <16>;
@@ -944,6 +1062,7 @@
 	auxclkreq0_ck: auxclkreq0_ck@210 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "auxclkreq0_ck";
 		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
 		ti,bit-shift = <2>;
 		reg = <0x0210>;
@@ -952,6 +1071,7 @@
 	auxclkreq1_ck: auxclkreq1_ck@214 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "auxclkreq1_ck";
 		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
 		ti,bit-shift = <2>;
 		reg = <0x0214>;
@@ -960,6 +1080,7 @@
 	auxclkreq2_ck: auxclkreq2_ck@218 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "auxclkreq2_ck";
 		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
 		ti,bit-shift = <2>;
 		reg = <0x0218>;
@@ -968,6 +1089,7 @@
 	auxclkreq3_ck: auxclkreq3_ck@21c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "auxclkreq3_ck";
 		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
 		ti,bit-shift = <2>;
 		reg = <0x021c>;
@@ -977,6 +1099,7 @@
 &cm_core_aon {
 	mpu_cm: mpu_cm@300 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "mpu_cm";
 		reg = <0x300 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -984,6 +1107,7 @@
 
 		mpu_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "mpu_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
@@ -991,6 +1115,7 @@
 
 	dsp_cm: dsp_cm@400 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "dsp_cm";
 		reg = <0x400 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -998,6 +1123,7 @@
 
 		dsp_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "dsp_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
@@ -1005,6 +1131,7 @@
 
 	abe_cm: abe_cm@500 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "abe_cm";
 		reg = <0x500 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1012,6 +1139,7 @@
 
 		abe_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "abe_clkctrl";
 			reg = <0x20 0x64>;
 			#clock-cells = <2>;
 		};
@@ -1022,6 +1150,7 @@
 &cm_core {
 	l3main1_cm: l3main1_cm@700 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l3main1_cm";
 		reg = <0x700 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1029,6 +1158,7 @@
 
 		l3main1_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3main1_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
@@ -1036,6 +1166,7 @@
 
 	l3main2_cm: l3main2_cm@800 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l3main2_cm";
 		reg = <0x800 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1043,6 +1174,7 @@
 
 		l3main2_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3main2_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
@@ -1050,6 +1182,7 @@
 
 	ipu_cm: ipu_cm@900 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "ipu_cm";
 		reg = <0x900 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1057,6 +1190,7 @@
 
 		ipu_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "ipu_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
@@ -1064,6 +1198,7 @@
 
 	dma_cm: dma_cm@a00 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "dma_cm";
 		reg = <0xa00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1071,6 +1206,7 @@
 
 		dma_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "dma_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
@@ -1078,6 +1214,7 @@
 
 	emif_cm: emif_cm@b00 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "emif_cm";
 		reg = <0xb00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1085,6 +1222,7 @@
 
 		emif_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "emif_clkctrl";
 			reg = <0x20 0x1c>;
 			#clock-cells = <2>;
 		};
@@ -1092,6 +1230,7 @@
 
 	l4cfg_cm: l4cfg_cm@d00 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l4cfg_cm";
 		reg = <0xd00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1099,6 +1238,7 @@
 
 		l4cfg_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l4cfg_clkctrl";
 			reg = <0x20 0x14>;
 			#clock-cells = <2>;
 		};
@@ -1106,6 +1246,7 @@
 
 	l3instr_cm: l3instr_cm@e00 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l3instr_cm";
 		reg = <0xe00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1113,26 +1254,30 @@
 
 		l3instr_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3instr_clkctrl";
 			reg = <0x20 0xc>;
 			#clock-cells = <2>;
 		};
 	};
 
-	l4per_cm: l4per_cm@1000 {
+	l4per_cm: clock@1000 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l4per_cm";
 		reg = <0x1000 0x200>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x1000 0x200>;
 
 		l4per_clkctrl: clock@20 {
-			compatible = "ti,clkctrl-l4per", "ti,clkctrl";
+			compatible = "ti,clkctrl";
+			clock-output-names = "l4per_clkctrl";
 			reg = <0x20 0x15c>;
 			#clock-cells = <2>;
 		};
 
 		l4sec_clkctrl: clock@1a0 {
-			compatible = "ti,clkctrl-l4sec", "ti,clkctrl";
+			compatible = "ti,clkctrl";
+			clock-output-names = "l4sec_clkctrl";
 			reg = <0x1a0 0x3c>;
 			#clock-cells = <2>;
 		};
@@ -1140,6 +1285,7 @@
 
 	dss_cm: dss_cm@1400 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "dss_cm";
 		reg = <0x1400 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1147,6 +1293,7 @@
 
 		dss_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "dss_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
@@ -1154,6 +1301,7 @@
 
 	gpu_cm: gpu_cm@1500 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "gpu_cm";
 		reg = <0x1500 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1161,6 +1309,7 @@
 
 		gpu_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "gpu_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
@@ -1168,6 +1317,7 @@
 
 	l3init_cm: l3init_cm@1600 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l3init_cm";
 		reg = <0x1600 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1175,6 +1325,7 @@
 
 		l3init_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3init_clkctrl";
 			reg = <0x20 0xd4>;
 			#clock-cells = <2>;
 		};
@@ -1184,6 +1335,7 @@
 &prm {
 	wkupaon_cm: wkupaon_cm@1900 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "wkupaon_cm";
 		reg = <0x1900 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1191,6 +1343,7 @@
 
 		wkupaon_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "wkupaon_clkctrl";
 			reg = <0x20 0x5c>;
 			#clock-cells = <2>;
 		};
@@ -1201,6 +1354,7 @@
 	fref_xtal_ck: fref_xtal_ck {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "fref_xtal_ck";
 		clocks = <&sys_clkin>;
 		ti,bit-shift = <28>;
 		reg = <0x14>;
diff --git a/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi b/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi
index 31f59de5190b..7af41361c480 100644
--- a/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi
+++ b/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi
@@ -28,7 +28,7 @@ partitions {
 		label = "rofs";
 	};
 
-	rwfs@6000000 {
+	rwfs@2a00000 {
 		reg = <0x2a00000 0x1600000>; // 22MB
 		label = "rwfs";
 	};
diff --git a/arch/arm/boot/dts/openbmc-flash-layout.dtsi b/arch/arm/boot/dts/openbmc-flash-layout.dtsi
index 6c26524e93e1..b47e14063c38 100644
--- a/arch/arm/boot/dts/openbmc-flash-layout.dtsi
+++ b/arch/arm/boot/dts/openbmc-flash-layout.dtsi
@@ -20,7 +20,7 @@ partitions {
 		label = "kernel";
 	};
 
-	rofs@c0000 {
+	rofs@4c0000 {
 		reg = <0x4c0000 0x1740000>;
 		label = "rofs";
 	};
diff --git a/arch/arm/boot/dts/orion5x-lacie-d2-network.dts b/arch/arm/boot/dts/orion5x-lacie-d2-network.dts
index 422958d13d42..03471d30bfd9 100644
--- a/arch/arm/boot/dts/orion5x-lacie-d2-network.dts
+++ b/arch/arm/boot/dts/orion5x-lacie-d2-network.dts
@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
index 0043e0040153..f17e25ac98dd 100644
--- a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
+++ b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
@@ -1,10 +1,5 @@
-/*
- * Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
 
 /*
  * TODO: add Orion USB device port init when kernel.org support is added.
diff --git a/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts b/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts
index 0ca6208a267d..d57859998350 100644
--- a/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts
+++ b/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts
@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  * Copyright (C) Sylver Bruneau <sylver.bruneau@googlemail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/orion5x-mv88f5181.dtsi b/arch/arm/boot/dts/orion5x-mv88f5181.dtsi
index f667012b26ca..819f9efb7058 100644
--- a/arch/arm/boot/dts/orion5x-mv88f5181.dtsi
+++ b/arch/arm/boot/dts/orion5x-mv88f5181.dtsi
@@ -1,10 +1,5 @@
-/*
- * Copyright (C) 2016 Jamie Lentin <jm@lentin.co.uk>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2016 Jamie Lentin <jm@lentin.co.uk>
 
 #include "orion5x.dtsi"
 
diff --git a/arch/arm/boot/dts/orion5x-mv88f5182.dtsi b/arch/arm/boot/dts/orion5x-mv88f5182.dtsi
index d1ed71c60209..86b87fb26dc9 100644
--- a/arch/arm/boot/dts/orion5x-mv88f5182.dtsi
+++ b/arch/arm/boot/dts/orion5x-mv88f5182.dtsi
@@ -1,10 +1,5 @@
-/*
- * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
 
 #include "orion5x.dtsi"
 
diff --git a/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts b/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts
index ea081afa469d..4f4888ec9138 100644
--- a/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts
+++ b/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts
@@ -1,10 +1,5 @@
-/*
- * Copyright (C) 2016 Jamie Lentin <jm@lentin.co.uk>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2016 Jamie Lentin <jm@lentin.co.uk>
 
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts b/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts
index 487324f7c54e..fd78aa02a3c5 100644
--- a/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts
+++ b/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts
@@ -1,10 +1,5 @@
-/*
- * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
 
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi
index 61e631b3fd8b..2d41f5c166ee 100644
--- a/arch/arm/boot/dts/orion5x.dtsi
+++ b/arch/arm/boot/dts/orion5x.dtsi
@@ -1,10 +1,5 @@
-/*
- * Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
 
 #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
 
diff --git a/arch/arm/boot/dts/ox810se-wd-mbwe.dts b/arch/arm/boot/dts/ox810se-wd-mbwe.dts
index 7e2fcb220aea..c59e06ff2423 100644
--- a/arch/arm/boot/dts/ox810se-wd-mbwe.dts
+++ b/arch/arm/boot/dts/ox810se-wd-mbwe.dts
@@ -103,6 +103,10 @@
 	};
 };
 
+&etha {
+	status = "okay";
+};
+
 &uart1 {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/ox810se.dtsi b/arch/arm/boot/dts/ox810se.dtsi
index 0755e5864c4a..96c0745f7b70 100644
--- a/arch/arm/boot/dts/ox810se.dtsi
+++ b/arch/arm/boot/dts/ox810se.dtsi
@@ -81,6 +81,24 @@
 		ranges;
 		interrupt-parent = <&intc>;
 
+		etha: ethernet@40400000 {
+			compatible = "oxsemi,ox810se-dwmac", "snps,dwmac";
+			reg = <0x40400000 0x2000>;
+			interrupts = <8>;
+			interrupt-names = "macirq";
+			mac-address = [000000000000]; /* Filled in by U-Boot */
+			phy-mode = "rgmii";
+
+			clocks = <&stdclk 6>, <&gmacclk>;
+			clock-names = "gmac", "stmmaceth";
+			resets = <&reset 6>;
+
+			/* Regmap for sys registers */
+			oxsemi,sys-ctrl = <&sys>;
+
+			status = "disabled";
+		};
+
 		apb-bridge@44000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm/boot/dts/ox820.dtsi b/arch/arm/boot/dts/ox820.dtsi
index 90846a7655b4..dde4364892bf 100644
--- a/arch/arm/boot/dts/ox820.dtsi
+++ b/arch/arm/boot/dts/ox820.dtsi
@@ -287,7 +287,7 @@
 				clocks = <&armclk>;
 			};
 
-			gic: gic@1000 {
+			gic: interrupt-controller@1000 {
 				compatible = "arm,arm11mp-gic";
 				interrupt-controller;
 				#interrupt-cells = <3>;
diff --git a/arch/arm/boot/dts/pxa25x.dtsi b/arch/arm/boot/dts/pxa25x.dtsi
index a248bf038033..5f8300e356ad 100644
--- a/arch/arm/boot/dts/pxa25x.dtsi
+++ b/arch/arm/boot/dts/pxa25x.dtsi
@@ -38,9 +38,12 @@
 			compatible = "marvell,pdma-1.0";
 			reg = <0x40000000 0x10000>;
 			interrupts = <25>;
-			#dma-channels = <16>;
 			#dma-cells = <2>;
+			/* For backwards compatibility: */
+			#dma-channels = <16>;
+			dma-channels = <16>;
 			#dma-requests = <40>;
+			dma-requests = <40>;
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi
index ccbecad9c5c7..a2cbfb3be609 100644
--- a/arch/arm/boot/dts/pxa27x.dtsi
+++ b/arch/arm/boot/dts/pxa27x.dtsi
@@ -12,9 +12,12 @@
 			compatible = "marvell,pdma-1.0";
 			reg = <0x40000000 0x10000>;
 			interrupts = <25>;
-			#dma-channels = <32>;
 			#dma-cells = <2>;
+			/* For backwards compatibility: */
+			#dma-channels = <32>;
+			dma-channels = <32>;
 			#dma-requests = <75>;
+			dma-requests = <75>;
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi b/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi
index 8a6721d436bd..147c99191dc2 100644
--- a/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi
+++ b/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi
@@ -189,31 +189,31 @@
 
 		regulators {
 			regulator-v3 {
-				regulator-compatible= "V3(DCDC)";
+				regulator-compatible = "V3(DCDC)";
 				regulator-min-microvolt = <725000>;
 				regulator-max-microvolt = <1800000>;
 			};
 
 			regulator-v4 {
-				regulator-compatible= "V4(DCDC)";
+				regulator-compatible = "V4(DCDC)";
 				regulator-min-microvolt = <725000>;
 				regulator-max-microvolt = <1800000>;
 			};
 
 			regulator-v5 {
-				regulator-compatible= "V5(LDO)";
+				regulator-compatible = "V5(LDO)";
 				regulator-min-microvolt = <1700000>;
 				regulator-max-microvolt = <2000000>;
 			};
 
 			reg_vcc_sdio: regulator-v6 {
-				regulator-compatible= "V6(LDO)";
+				regulator-compatible = "V6(LDO)";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			regulator-v7 {
-				regulator-compatible= "V7(LDO)";
+				regulator-compatible = "V7(LDO)";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 			};
diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi
index d19674812cd2..f9c216f91865 100644
--- a/arch/arm/boot/dts/pxa3xx.dtsi
+++ b/arch/arm/boot/dts/pxa3xx.dtsi
@@ -122,9 +122,12 @@
 			compatible = "marvell,pdma-1.0";
 			reg = <0x40000000 0x10000>;
 			interrupts = <25>;
-			#dma-channels = <32>;
 			#dma-cells = <2>;
+			/* For backwards compatibility: */
+			#dma-channels = <32>;
+			dma-channels = <32>;
 			#dma-requests = <100>;
+			dma-requests = <100>;
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts b/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts
new file mode 100644
index 000000000000..215613c65250
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts
@@ -0,0 +1,300 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Luca Weiss <luca@z3ntu.xyz>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "qcom-pm8226.dtsi"
+
+/delete-node/ &adsp_region;
+
+/ {
+	model = "ASUS ZenWatch 2";
+	compatible = "asus,sparrow", "qcom,apq8026";
+	chassis-type = "watch";
+	qcom,msm-id = <199 0x20000>;
+	qcom,board-id = <8 3005>;
+
+	reserved-memory {
+		sbl_region: sbl@2f00000 {
+			reg = <0x02f00000 0x100000>;
+			no-map;
+		};
+		external_image_region: external-image@3100000 {
+			reg = <0x3100000 0x200000>;
+			no-map;
+		};
+		peripheral_region: peripheral@3300000 {
+			reg = <0x3300000 0x600000>;
+			no-map;
+		};
+		adsp_region: adsp@3900000 {
+			reg = <0x3900000 0x1400000>;
+			no-map;
+		};
+		modem_region: modem@4d00000 {
+			reg = <0x4d00000 0x1b00000>;
+			no-map;
+		};
+		modem_efs_region: modem-efs@7f00000 {
+			reg = <0x7f00000 0x100000>;
+			no-map;
+		};
+	};
+
+	vreg_wlan: wlan-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "wl-reg";
+		regulator-min-microvolt = <2950000>;
+		regulator-max-microvolt = <2950000>;
+
+		gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_regulator_default_state>;
+	};
+};
+
+&adsp {
+	status = "okay";
+};
+
+&blsp1_uart1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&blsp1_uart1_default_state>;
+
+	bluetooth {
+		compatible = "brcm,bcm43430a1-bt";
+		max-speed = <3000000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bluetooth_default_state>;
+
+		host-wakeup-gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&tlmm 61 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&pm8226_vib {
+	status = "okay";
+};
+
+&rpm_requests {
+	pm8226-regulators {
+		compatible = "qcom,rpm-pm8226-regulators";
+
+		pm8226_s3: s3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+		};
+		pm8226_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2200000>;
+		};
+		pm8226_s5: s5 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+		pm8226_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+		pm8226_l3: l3 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1337500>;
+		};
+		pm8226_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+		pm8226_l5: l5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+		pm8226_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		pm8226_l7: l7 {
+			regulator-min-microvolt = <1900000>;
+			regulator-max-microvolt = <1900000>;
+		};
+		pm8226_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		pm8226_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		pm8226_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		pm8226_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		pm8226_l14: l14 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+		};
+		pm8226_l15: l15 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+		pm8226_l16: l16 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+		pm8226_l17: l17 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+		pm8226_l18: l18 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+		pm8226_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+		pm8226_l20: l20 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+		pm8226_l21: l21 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+		pm8226_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+		pm8226_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		pm8226_l24: l24 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1350000>;
+		};
+		pm8226_l25: l25 {
+			regulator-min-microvolt = <1775000>;
+			regulator-max-microvolt = <2125000>;
+		};
+		pm8226_l26: l26 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+		pm8226_l27: l27 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+		pm8226_l28: l28 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_lvs1: lvs1 {};
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	vmmc-supply = <&pm8226_l17>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	bus-width = <8>;
+	non-removable;
+};
+
+&sdhc_3 {
+	status = "okay";
+
+	max-frequency = <100000000>;
+	non-removable;
+
+	vmmc-supply = <&vreg_wlan>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	wifi@1 {
+		compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac";
+		reg = <1>;
+
+		interrupts-extended = <&tlmm 46 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "host-wake";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_hostwake_default_state>;
+	};
+};
+
+&smbb {
+	qcom,fast-charge-safe-current = <1500000>;
+	qcom,fast-charge-current-limit = <350000>;
+	qcom,fast-charge-safe-voltage = <4430000>;
+	qcom,fast-charge-high-threshold-voltage = <4400000>;
+	qcom,auto-recharge-threshold-voltage = <4300000>;
+	qcom,minimum-input-voltage = <4400000>;
+};
+
+&tlmm {
+	blsp1_uart1_default_state: blsp1-uart1-default-state {
+		pins = "gpio0", "gpio1", "gpio2", "gpio3";
+		function = "blsp_uart1";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	bluetooth_default_state: bluetooth-default-state {
+		pins = "gpio48", "gpio61";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+		input-enable;
+	};
+
+	wlan_hostwake_default_state: wlan-hostwake-default-state {
+		pins = "gpio46";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		input-enable;
+	};
+
+	wlan_regulator_default_state: wlan-regulator-default-state {
+		pins = "gpio35";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&usb {
+	status = "okay";
+	extcon = <&smbb>;
+	dr_mode = "peripheral";
+};
+
+&usb_hs_phy {
+	extcon = <&smbb>;
+	v1p8-supply = <&pm8226_l10>;
+	v3p3-supply = <&pm8226_l20>;
+};
diff --git a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
index f350c4e8c194..193569f0ca5f 100644
--- a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
+++ b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
@@ -8,6 +8,8 @@
 #include "qcom-msm8226.dtsi"
 #include "qcom-pm8226.dtsi"
 
+/delete-node/ &adsp_region;
+
 / {
 	model = "LG G Watch R";
 	compatible = "lg,lenok", "qcom,apq8026";
@@ -16,11 +18,46 @@
 
 	aliases {
 		serial0 = &blsp1_uart3;
+		serial1 = &blsp1_uart4;
 	};
 
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	reserved-memory {
+		adsp_region: adsp@3300000 {
+			reg = <0x03300000 0x1400000>;
+			no-map;
+		};
+	};
+
+	vreg_wlan: wlan-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "wl-reg";
+		regulator-min-microvolt = <2950000>;
+		regulator-max-microvolt = <2950000>;
+
+		gpio = <&tlmm 46 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_regulator_default_state>;
+	};
+};
+
+&adsp {
+	status = "okay";
+};
+
+&blsp1_i2c1 {
+	status = "okay";
+
+	fuel-gauge@55 {
+		compatible = "ti,bq27421";
+		reg = <0x55>;
+	};
 };
 
 &blsp1_i2c5 {
@@ -57,14 +94,30 @@
 	status = "okay";
 };
 
+&blsp1_uart4 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&blsp1_uart4_default_state>;
+
+	bluetooth {
+		compatible = "brcm,bcm43430a0-bt";
+
+		max-speed = <3000000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bluetooth_default_state>;
+
+		host-wakeup-gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
+	};
+};
+
 &rpm_requests {
 	pm8226-regulators {
 		compatible = "qcom,rpm-pm8226-regulators";
 
-		pm8226_s1: s1 {
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1275000>;
-		};
 		pm8226_s3: s3 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1350000>;
@@ -195,24 +248,55 @@
 
 	bus-width = <8>;
 	non-removable;
+};
 
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdhc1_pin_a>;
+&sdhc_3 {
+	status = "okay";
+
+	max-frequency = <100000000>;
+	non-removable;
+
+	vmmc-supply = <&vreg_wlan>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	wifi@1 {
+		compatible = "brcm,bcm43430a0-fmac", "brcm,bcm4329-fmac";
+		reg = <1>;
+
+		interrupts-extended = <&tlmm 37 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "host-wake";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_hostwake_default_state>;
+	};
+};
+
+&smbb {
+	qcom,fast-charge-safe-current = <450000>;
+	qcom,fast-charge-current-limit = <400000>;
+	qcom,fast-charge-safe-voltage = <4350000>;
+	qcom,fast-charge-high-threshold-voltage = <4350000>;
+	qcom,auto-recharge-threshold-voltage = <4240000>;
+	qcom,minimum-input-voltage = <4450000>;
 };
 
 &tlmm {
-	sdhc1_pin_a: sdhc1-pin-active {
-		clk {
-			pins = "sdc1_clk";
-			drive-strength = <10>;
-			bias-disable;
-		};
+	blsp1_uart4_default_state: blsp1-uart4-default-state {
+		pins = "gpio12", "gpio13", "gpio14", "gpio15";
+		function = "blsp_uart4";
+		drive-strength = <8>;
+		bias-disable;
+	};
 
-		cmd-data {
-			pins = "sdc1_cmd", "sdc1_data";
-			drive-strength = <10>;
-			bias-pull-up;
-		};
+	bluetooth_default_state: bluetooth-default-state {
+		pins = "gpio47", "gpio48";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		input-enable;
 	};
 
 	touch_pins: touch {
@@ -234,4 +318,31 @@
 			output-high;
 		};
 	};
+
+	wlan_hostwake_default_state: wlan-hostwake-default-state {
+		pins = "gpio37";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		input-enable;
+	};
+
+	wlan_regulator_default_state: wlan-regulator-default-state {
+		pins = "gpio46";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&usb {
+	status = "okay";
+	extcon = <&smbb>;
+	dr_mode = "peripheral";
+};
+
+&usb_hs_phy {
+	extcon = <&smbb>;
+	v1p8-supply = <&pm8226_l10>;
+	v3p3-supply = <&pm8226_l20>;
 };
diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
index d664ccd454c5..573e4dc66bb0 100644
--- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
 #include "qcom-msm8660.dtsi"
@@ -83,7 +84,7 @@
 
 	soc {
 		pinctrl@800000 {
-			/* eMMMC pins, all 8 data lines connected */
+			/* eMMC pins, all 8 data lines connected */
 			dragon_sdcc1_pins: sdcc1 {
 				mux {
 					pins = "gpio159", "gpio160", "gpio161",
@@ -158,6 +159,19 @@
 				};
 			};
 
+			dragon_gsbi3_i2c_pins: gsbi3_i2c {
+				mux {
+					pins = "gpio43", "gpio44";
+					function = "gsbi3";
+				};
+				pinconf {
+					pins = "gpio43", "gpio44";
+					drive-strength = <8>;
+					/* These have external pull-up 2.2kOhm to 1.8V */
+					bias-disable;
+				};
+			};
+
 			dragon_gsbi8_i2c_pins: gsbi8_i2c {
 				mux {
 					pins = "gpio64", "gpio65";
@@ -239,6 +253,22 @@
 					bias-pull-up;
 				};
 			};
+
+			dragon_tma340_gpios: tma340 {
+				reset {
+					/* RESET line, TS_ATTN, WAKE_CTP */
+					pins = "gpio58";
+					function = "gpio";
+					drive-strength = <6>;
+					bias-disable;
+				};
+				irq {
+					pins = "gpio61"; /* IRQ line */
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
 		};
 
 		qcom,ssbi@500000 {
@@ -273,7 +303,7 @@
 				};
 
 				gpio@150 {
-					dragon_ethernet_gpios: ethernet-gpios {
+					dragon_ethernet_gpios: ethernet-state {
 						pinconf {
 							pins = "gpio7";
 							function = "normal";
@@ -282,7 +312,7 @@
 							power-source = <PM8058_GPIO_S3>;
 						};
 					};
-					dragon_bmp085_gpios: bmp085-gpios {
+					dragon_bmp085_gpios: bmp085-state {
 						pinconf {
 							pins = "gpio16";
 							function = "normal";
@@ -291,7 +321,7 @@
 							power-source = <PM8058_GPIO_S3>;
 						};
 					};
-					dragon_mpu3050_gpios: mpu3050-gpios {
+					dragon_mpu3050_gpios: mpu3050-state {
 						pinconf {
 							pins = "gpio17";
 							function = "normal";
@@ -300,7 +330,7 @@
 							power-source = <PM8058_GPIO_S3>;
 						};
 					};
-					dragon_sdcc3_gpios: sdcc3-gpios {
+					dragon_sdcc3_gpios: sdcc3-state {
 						pinconf {
 							pins = "gpio22";
 							function = "normal";
@@ -309,7 +339,7 @@
 							power-source = <PM8058_GPIO_S3>;
 						};
 					};
-					dragon_sdcc5_gpios: sdcc5-gpios {
+					dragon_sdcc5_gpios: sdcc5-state {
 						pinconf {
 							pins = "gpio26";
 							function = "normal";
@@ -319,7 +349,7 @@
 							power-source = <PM8058_GPIO_S3>;
 						};
 					};
-					dragon_ak8975_gpios: ak8975-gpios {
+					dragon_ak8975_gpios: ak8975-state {
 						pinconf {
 							pins = "gpio33";
 							function = "normal";
@@ -328,9 +358,9 @@
 							power-source = <PM8058_GPIO_S3>;
 						};
 					};
-					dragon_cm3605_gpios: cm3605-gpios {
+					dragon_cm3605_gpios: cm3605-state {
 						/* Pin 34 connected to the proxy IRQ */
-						pinconf_gpio34 {
+						gpio34-pins {
 							pins = "gpio34";
 							function = "normal";
 							input-enable;
@@ -338,7 +368,7 @@
 							power-source = <PM8058_GPIO_S3>;
 						};
 						/* Pin 35 connected to ASET */
-						pinconf_gpio35 {
+						gpio35-pins {
 							pins = "gpio35";
 							function = "normal";
 							output-high;
@@ -346,7 +376,7 @@
 							power-source = <PM8058_GPIO_S3>;
 						};
 					};
-					dragon_veth_gpios: veth-gpios {
+					dragon_veth_gpios: veth-state {
 						pinconf {
 							pins = "gpio40";
 							function = "normal";
@@ -416,6 +446,7 @@
 					compatible = "qcom,pm8058-led";
 					reg = <0x131>;
 					label = "pm8058:red";
+					color = <LED_COLOR_ID_RED>;
 					default-state = "off";
 				};
 				led@132 {
@@ -426,6 +457,7 @@
 					compatible = "qcom,pm8058-led";
 					reg = <0x132>;
 					label = "pm8058:yellow";
+					color = <LED_COLOR_ID_YELLOW>;
 					default-state = "off";
 					linux,default-trigger = "mmc0";
 				};
@@ -433,12 +465,53 @@
 					compatible = "qcom,pm8058-led";
 					reg = <0x133>;
 					label = "pm8058:green";
+					function = LED_FUNCTION_HEARTBEAT;
+					color = <LED_COLOR_ID_GREEN>;
 					default-state = "on";
 					linux,default-trigger = "heartbeat";
 				};
 			};
 		};
 
+		gsbi@16200000 {
+			qcom,mode = <GSBI_PROT_I2C>;
+			status = "okay";
+
+			gsbi3_i2c: i2c@16280000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&dragon_gsbi3_i2c_pins>;
+				status = "okay";
+
+				touchscreen@24 {
+					compatible = "cypress,cy8ctma340";
+					reg = <0x24>;
+					/* Certainly we can do at least 400 kHz */
+					clock-frequency = <400000>;
+					/* IRQ on GPIO61 called /CTP_INT */
+					interrupt-parent = <&tlmm>;
+					interrupts = <61 IRQ_TYPE_EDGE_FALLING>;
+					/*
+					 * The I2C bus is using a PCA9306 level translator from L16A
+					 * to L2B so these two voltages are needed and L16A is
+					 * kind of the IO voltage, however L16Aisn't really fed to
+					 * the TMA340, which relies entirely on L2B (PM8901 L2).
+					 */
+					vcpin-supply = <&pm8058_l16>;
+					vdd-supply = <&pm8901_l2>;
+					/* GPIO58, called WAKE_CTP */
+					reset-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
+					touchscreen-size-x = <480>;
+					touchscreen-size-y = <800>;
+					active-interval-ms = <0>;
+					touch-timeout-ms = <255>;
+					lowpower-interval-ms = <10>;
+					bootloader-key = /bits/ 8 <0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&dragon_tma340_gpios>;
+				};
+			};
+		};
+
 		gsbi@19800000 {
 			status = "okay";
 			qcom,mode = <GSBI_PROT_I2C>;
@@ -629,7 +702,8 @@
 					bias-pull-down;
 				};
 				l2 {
-					regulator-min-microvolt = <2850000>;
+					/* TMA340 requires strictly 3.3V */
+					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
 					bias-pull-down;
 				};
@@ -674,14 +748,14 @@
 					bias-pull-down;
 				};
 
-				/* LVS0 thru 3 and mvs0 are just switches */
+				/* LVS0 thru 3 and mvs are just switches */
 				lvs0 {
 					regulator-always-on;
 				};
 				lvs1 { };
 				lvs2 { };
 				lvs3 { };
-				mvs0 {};
+				mvs { };
 
 			};
 
diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
index 9a835335bf78..fee278e32cb6 100644
--- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
@@ -24,9 +24,9 @@
 		ramoops@88d00000{
 			compatible = "ramoops";
 			reg = <0x88d00000 0x100000>;
-			record-size     = <0x00020000>;
-			console-size    = <0x00020000>;
-			ftrace-size     = <0x00020000>;
+			record-size = <0x00020000>;
+			console-size = <0x00020000>;
+			ftrace-size = <0x00020000>;
 		};
 	};
 
@@ -44,12 +44,12 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		volume_up {
+		key-volume-up {
 			label = "Volume Up";
 			gpios = <&pm8921_gpio 4 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_VOLUMEUP>;
 		};
-		volume_down {
+		key-volume-down {
 			label = "Volume Down";
 			gpios = <&pm8921_gpio 38 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_VOLUMEDOWN>;
@@ -98,8 +98,8 @@
 				 * tabla2x-slim-VDDIO_CDC
 				 */
 				s4 {
-					regulator-min-microvolt	= <1800000>;
-					regulator-max-microvolt	= <1800000>;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
 					qcom,switch-mode-frequency = <3200000>;
 					regulator-always-on;
 				};
@@ -212,13 +212,12 @@
 			};
 		};
 
-		dsi0: mdss_dsi@4700000 {
+		dsi0: dsi@4700000 {
 			status = "okay";
 			vdda-supply = <&pm8921_l2>;/*VDD_MIPI1 to 4*/
 			vdd-supply = <&pm8921_l8>;
 			vddio-supply = <&pm8921_lvs7>;
 			avdd-supply = <&pm8921_l11>;
-			vcss-supply = <&ext_3p3v>;
 
 			panel@0 {
 				reg = <0>;
@@ -342,17 +341,17 @@
 			};
 		};
 
-		imem@2a03f000 {
-			compatible = "syscon", "simple-mfd";
+		sram@2a03f000 {
+			compatible = "qcom,apq8064-imem", "syscon", "simple-mfd";
 			reg = <0x2a03f000 0x1000>;
 
 			reboot-mode {
 				compatible = "syscon-reboot-mode";
 				offset = <0x65c>;
 
-				mode-normal	= <0x77665501>;
-				mode-bootloader	= <0x77665500>;
-				mode-recovery	= <0x77665502>;
+				mode-normal = <0x77665501>;
+				mode-bootloader = <0x77665500>;
+				mode-recovery = <0x77665502>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
index e068a8d0adf0..529629a0a9dc 100644
--- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
@@ -82,8 +82,8 @@
 				};
 
 				s4 {
-					regulator-min-microvolt	= <1800000>;
-					regulator-max-microvolt	= <1800000>;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
 					qcom,switch-mode-frequency = <3200000>;
 				};
 
@@ -196,8 +196,8 @@
 		qcom,ssbi@500000 {
 			pmic@0 {
 				gpio@150 {
-					wlan_default_gpios: wlan-gpios {
-						pios {
+					wlan_default_gpios: wlan-gpios-state {
+						pinconf {
 							pins = "gpio43";
 							function = "normal";
 							bias-disable;
@@ -215,7 +215,7 @@
 			vdda_refclk-supply = <&v3p3_fixed>;
 			pinctrl-0 = <&pcie_pins>;
 			pinctrl-names = "default";
-			perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
+			perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
 		};
 
 		amba {
@@ -230,9 +230,9 @@
 			sdcc3: mmc@12180000 {
 				status = "okay";
 				vmmc-supply = <&v3p3_fixed>;
-				pinctrl-names	= "default";
-				pinctrl-0	= <&card_detect>;
-				cd-gpios	= <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&card_detect>;
+				cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
 			};
 			/* WLAN */
 			sdcc4: mmc@121c0000 {
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index 2638b380be20..a7f90217661b 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-apq8064-v2.0.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
 / {
@@ -39,6 +40,7 @@
 
 		led@1 {
 			label = "apq8064:green:user1";
+			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&pm8921_gpio 18 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
@@ -108,8 +110,8 @@
 				};
 
 				s4 {
-					regulator-min-microvolt	= <1800000>;
-					regulator-max-microvolt	= <1800000>;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
 					qcom,switch-mode-frequency = <3200000>;
 				};
 
@@ -240,8 +242,8 @@
 		};
 
 		sata0: sata@29000000 {
-			status		= "okay";
-			target-supply	= <&pm8921_s4>;
+			status = "okay";
+			target-supply = <&pm8921_s4>;
 		};
 
 		/* OTG */
@@ -285,14 +287,14 @@
 			vdda_refclk-supply = <&ext_3p3v>;
 			pinctrl-0 = <&pcie_pins>;
 			pinctrl-names = "default";
-			perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
+			perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
 		};
 
 		qcom,ssbi@500000 {
 			pmic@0 {
 				gpio@150 {
-					wlan_default_gpios: wlan-gpios {
-						pios {
+					wlan_default_gpios: wlan-gpios-state {
+						pinconf {
 							pins = "gpio43";
 							function = "normal";
 							bias-disable;
@@ -300,8 +302,8 @@
 						};
 					};
 
-					notify_led: nled {
-						pios {
+					notify_led: nled-state {
+						pinconf {
 							pins = "gpio18";
 							function = "normal";
 							bias-disable;
@@ -324,9 +326,9 @@
 			sdcc3: mmc@12180000 {
 				status = "okay";
 				vmmc-supply = <&pm8921_l6>;
-				pinctrl-names	= "default";
-				pinctrl-0	= <&card_detect>;
-				cd-gpios	= <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&card_detect>;
+				cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
 			};
 			/* WLAN */
 			sdcc4: mmc@121c0000 {
@@ -341,7 +343,6 @@
 			status = "okay";
 
 			core-vdda-supply = <&pm8921_hdmi_switch>;
-			hdmi-mux-supply = <&ext_3p3v>;
 
 			hpd-gpios = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>;
 
diff --git a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
index cbe42c4153a0..b4d286a6fab1 100644
--- a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
@@ -76,7 +76,7 @@
 		pinconf {
 			pins = "gpio20", "gpio21";
 			drive-strength = <2>;
-			bias-disable = <0>;
+			bias-disable;
 		};
 	};
 
@@ -116,7 +116,7 @@
 		pinconf {
 			pins = "gpio24", "gpio25";
 			drive-strength = <2>;
-			bias-disable = <0>;
+			bias-disable;
 		};
 	};
 
@@ -141,7 +141,7 @@
 		pinconf {
 			pins = "gpio8", "gpio9";
 			drive-strength = <2>;
-			bias-disable = <0>;
+			bias-disable;
 		};
 	};
 
@@ -166,7 +166,7 @@
 		pinconf {
 			pins = "gpio12", "gpio13";
 			drive-strength = <2>;
-			bias-disable = <0>;
+			bias-disable;
 		};
 	};
 
@@ -229,7 +229,7 @@
 		pinconf {
 			pins = "gpio16", "gpio17";
 			drive-strength = <2>;
-			bias-disable = <0>;
+			bias-disable;
 		};
 	};
 
@@ -282,7 +282,7 @@
 		pinconf {
 			pins = "gpio84", "gpio85";
 			drive-strength = <2>;
-			bias-disable = <0>;
+			bias-disable;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts
index 0cee62c7b8b0..c07c5474750d 100644
--- a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts
@@ -23,28 +23,28 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&gpio_keys_pin_a>;
 
-		camera-focus {
+		key-camera-focus {
 			label = "camera_focus";
 			gpios = <&pm8921_gpio 3 GPIO_ACTIVE_LOW>;
 			linux,input-type = <1>;
 			linux,code = <KEY_CAMERA_FOCUS>;
 		};
 
-		camera-snapshot {
+		key-camera-snapshot {
 			label = "camera_snapshot";
 			gpios = <&pm8921_gpio 4 GPIO_ACTIVE_LOW>;
 			linux,input-type = <1>;
 			linux,code = <KEY_CAMERA>;
 		};
 
-		volume-down {
+		key-volume-down {
 			label = "volume_down";
 			gpios = <&pm8921_gpio 29 GPIO_ACTIVE_LOW>;
 			linux,input-type = <1>;
 			linux,code = <KEY_VOLUMEDOWN>;
 		};
 
-		volume-up {
+		key-volume-up {
 			label = "volume_up";
 			gpios = <&pm8921_gpio 35 GPIO_ACTIVE_LOW>;
 			linux,input-type = <1>;
@@ -334,7 +334,7 @@
 		qcom,ssbi@500000 {
 			pmic@0 {
 				gpio@150 {
-					gpio_keys_pin_a: gpio-keys-pin-active {
+					gpio_keys_pin_a: gpio-keys-active-state {
 						pins = "gpio3", "gpio4", "gpio29", "gpio35";
 						function = "normal";
 
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 4d562c94c31c..942aa2278355 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -2,6 +2,7 @@
 /dts-v1/;
 
 #include <dt-bindings/clock/qcom,gcc-msm8960.h>
+#include <dt-bindings/clock/qcom,lcc-msm8960.h>
 #include <dt-bindings/reset/qcom,gcc-msm8960.h>
 #include <dt-bindings/clock/qcom,mmcc-msm8960.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
@@ -105,7 +106,7 @@
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
-			thermal-sensors = <&gcc 7>;
+			thermal-sensors = <&tsens 7>;
 			coefficients = <1199 0>;
 
 			trips {
@@ -126,7 +127,7 @@
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
-			thermal-sensors = <&gcc 8>;
+			thermal-sensors = <&tsens 8>;
 			coefficients = <1132 0>;
 
 			trips {
@@ -147,7 +148,7 @@
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
-			thermal-sensors = <&gcc 9>;
+			thermal-sensors = <&tsens 9>;
 			coefficients = <1199 0>;
 
 			trips {
@@ -168,7 +169,7 @@
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
-			thermal-sensors = <&gcc 10>;
+			thermal-sensors = <&tsens 10>;
 			coefficients = <1132 0>;
 
 			trips {
@@ -227,7 +228,7 @@
 	smd {
 		compatible = "qcom,smd";
 
-		modem@0 {
+		modem-edge {
 			interrupts = <0 37 IRQ_TYPE_EDGE_RISING>;
 
 			qcom,ipc = <&l2cc 8 3>;
@@ -236,7 +237,7 @@
 			status = "disabled";
 		};
 
-		q6@1 {
+		q6-edge {
 			interrupts = <0 90 IRQ_TYPE_EDGE_RISING>;
 
 			qcom,ipc = <&l2cc 8 15>;
@@ -245,7 +246,7 @@
 			status = "disabled";
 		};
 
-		dsps@3 {
+		dsps-edge {
 			interrupts = <0 138 IRQ_TYPE_EDGE_RISING>;
 
 			qcom,ipc = <&sps_sic_non_secure 0x4080 0>;
@@ -254,7 +255,7 @@
 			status = "disabled";
 		};
 
-		riva@6 {
+		riva-edge {
 			interrupts = <0 198 IRQ_TYPE_EDGE_RISING>;
 
 			qcom,ipc = <&l2cc 8 25>;
@@ -315,7 +316,7 @@
 
 	firmware {
 		scm {
-			compatible = "qcom,scm-apq8064";
+			compatible = "qcom,scm-apq8064", "qcom,scm";
 
 			clocks = <&rpmcc RPM_DAYTONA_FABRIC_CLK>;
 			clock-names = "core";
@@ -430,8 +431,8 @@
 		};
 
 		sps_sic_non_secure: sps-sic-non-secure@12100000 {
-			compatible	= "syscon";
-			reg		= <0x12100000 0x10000>;
+			compatible = "syscon";
+			reg = <0x12100000 0x10000>;
 		};
 
 		gsbi1: gsbi@12440000 {
@@ -796,27 +797,41 @@
 		};
 
 		qfprom: qfprom@700000 {
-			compatible	= "qcom,qfprom";
-			reg		= <0x00700000 0x1000>;
-			#address-cells	= <1>;
-			#size-cells	= <1>;
+			compatible = "qcom,apq8064-qfprom", "qcom,qfprom";
+			reg = <0x00700000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			ranges;
-			tsens_calib: calib {
+			tsens_calib: calib@404 {
 				reg = <0x404 0x10>;
 			};
-			tsens_backup: backup_calib {
+			tsens_backup: backup_calib@414 {
 				reg = <0x414 0x10>;
 			};
 		};
 
 		gcc: clock-controller@900000 {
-			compatible = "qcom,gcc-apq8064";
+			compatible = "qcom,gcc-apq8064", "syscon";
 			reg = <0x00900000 0x4000>;
-			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
-			nvmem-cell-names = "calib", "calib_backup";
 			#clock-cells = <1>;
+			#power-domain-cells = <1>;
 			#reset-cells = <1>;
-			#thermal-sensor-cells = <1>;
+			clocks = <&cxo_board>,
+				 <&pxo_board>,
+				 <&lcc PLL4>;
+			clock-names = "cxo", "pxo", "pll4";
+
+			tsens: thermal-sensor {
+				compatible = "qcom,msm8960-tsens";
+
+				nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+				nvmem-cell-names = "calib", "calib_backup";
+				interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "uplow";
+
+				#qcom,sensors = <11>;
+				#thermal-sensor-cells = <1>;
+			};
 		};
 
 		lcc: clock-controller@28000000 {
@@ -824,33 +839,66 @@
 			reg = <0x28000000 0x1000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
+			clocks = <&pxo_board>,
+				 <&gcc PLL4_VOTE>,
+				 <0>,
+				 <0>, <0>,
+				 <0>, <0>,
+				 <0>;
+			clock-names = "pxo",
+				      "pll4_vote",
+				      "mi2s_codec_clk",
+				      "codec_i2s_mic_codec_clk",
+				      "spare_i2s_mic_codec_clk",
+				      "codec_i2s_spkr_codec_clk",
+				      "spare_i2s_spkr_codec_clk",
+				      "pcm_codec_clk";
 		};
 
 		mmcc: clock-controller@4000000 {
 			compatible = "qcom,mmcc-apq8064";
 			reg = <0x4000000 0x1000>;
 			#clock-cells = <1>;
+			#power-domain-cells = <1>;
 			#reset-cells = <1>;
+			clocks = <&pxo_board>,
+				 <&gcc PLL3>,
+				 <&gcc PLL8_VOTE>,
+				 <&dsi0_phy 1>,
+				 <&dsi0_phy 0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			clock-names = "pxo",
+				      "pll3",
+				      "pll8_vote",
+				      "dsi1pll",
+				      "dsi1pllbyte",
+				      "dsi2pll",
+				      "dsi2pllbyte",
+				      "hdmipll";
 		};
 
 		l2cc: clock-controller@2011000 {
-			compatible	= "syscon";
-			reg		= <0x2011000 0x1000>;
+			compatible = "qcom,kpss-gcc", "syscon";
+			reg = <0x2011000 0x1000>;
 		};
 
 		rpm@108000 {
-			compatible	= "qcom,rpm-apq8064";
-			reg		= <0x108000 0x1000>;
-			qcom,ipc	= <&l2cc 0x8 2>;
+			compatible = "qcom,rpm-apq8064";
+			reg = <0x108000 0x1000>;
+			qcom,ipc = <&l2cc 0x8 2>;
 
-			interrupts	= <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
-					  <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
-					  <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names	= "ack", "err", "wakeup";
+			interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ack", "err", "wakeup";
 
 			rpmcc: clock-controller {
-				compatible	= "qcom,rpmcc-apq8064", "qcom,rpmcc";
+				compatible = "qcom,rpmcc-apq8064", "qcom,rpmcc";
 				#clock-cells = <1>;
+				clocks = <&pxo_board>, <&cxo_board>;
+				clock-names = "pxo", "cxo";
 			};
 
 			regulators {
@@ -1002,43 +1050,43 @@
 		};
 
 		sata_phy0: phy@1b400000 {
-			compatible	= "qcom,apq8064-sata-phy";
-			status		= "disabled";
-			reg		= <0x1b400000 0x200>;
-			reg-names	= "phy_mem";
-			clocks		= <&gcc SATA_PHY_CFG_CLK>;
-			clock-names	= "cfg";
-			#phy-cells	= <0>;
+			compatible = "qcom,apq8064-sata-phy";
+			status = "disabled";
+			reg = <0x1b400000 0x200>;
+			reg-names = "phy_mem";
+			clocks = <&gcc SATA_PHY_CFG_CLK>;
+			clock-names = "cfg";
+			#phy-cells = <0>;
 		};
 
 		sata0: sata@29000000 {
-			compatible		= "qcom,apq8064-ahci", "generic-ahci";
-			status			= "disabled";
-			reg			= <0x29000000 0x180>;
-			interrupts		= <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
-
-			clocks			= <&gcc SFAB_SATA_S_H_CLK>,
-						<&gcc SATA_H_CLK>,
-						<&gcc SATA_A_CLK>,
-						<&gcc SATA_RXOOB_CLK>,
-						<&gcc SATA_PMALIVE_CLK>;
-			clock-names		= "slave_iface",
-						"iface",
-						"bus",
-						"rxoob",
-						"core_pmalive";
-
-			assigned-clocks		= <&gcc SATA_RXOOB_CLK>,
-						<&gcc SATA_PMALIVE_CLK>;
-			assigned-clock-rates	= <100000000>, <100000000>;
-
-			phys			= <&sata_phy0>;
-			phy-names		= "sata-phy";
-			ports-implemented	= <0x1>;
+			compatible = "qcom,apq8064-ahci", "generic-ahci";
+			status	 = "disabled";
+			reg	 = <0x29000000 0x180>;
+			interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc SFAB_SATA_S_H_CLK>,
+				 <&gcc SATA_H_CLK>,
+				 <&gcc SATA_A_CLK>,
+				 <&gcc SATA_RXOOB_CLK>,
+				 <&gcc SATA_PMALIVE_CLK>;
+			clock-names = "slave_iface",
+				      "iface",
+				      "bus",
+				      "rxoob",
+				      "core_pmalive";
+
+			assigned-clocks = <&gcc SATA_RXOOB_CLK>,
+					  <&gcc SATA_PMALIVE_CLK>;
+			assigned-clock-rates = <100000000>, <100000000>;
+
+			phys = <&sata_phy0>;
+			phy-names = "sata-phy";
+			ports-implemented = <0x1>;
 		};
 
 		/* Temporary fixed regulator */
-		sdcc1bam:dma@12402000{
+		sdcc1bam: dma-controller@12402000{
 			compatible = "qcom,bam-v1.3.0";
 			reg = <0x12402000 0x8000>;
 			interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
@@ -1048,7 +1096,7 @@
 			qcom,ee = <0>;
 		};
 
-		sdcc3bam:dma@12182000{
+		sdcc3bam: dma-controller@12182000{
 			compatible = "qcom,bam-v1.3.0";
 			reg = <0x12182000 0x8000>;
 			interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
@@ -1058,7 +1106,7 @@
 			qcom,ee = <0>;
 		};
 
-		sdcc4bam:dma@121c2000{
+		sdcc4bam: dma-controller@121c2000{
 			compatible = "qcom,bam-v1.3.0";
 			reg = <0x121c2000 0x8000>;
 			interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
@@ -1074,18 +1122,18 @@
 			#size-cells = <1>;
 			ranges;
 			sdcc1: mmc@12400000 {
-				status		= "disabled";
-				compatible	= "arm,pl18x", "arm,primecell";
-				pinctrl-names	= "default";
-				pinctrl-0	= <&sdcc1_pins>;
+				status = "disabled";
+				compatible = "arm,pl18x", "arm,primecell";
+				pinctrl-names = "default";
+				pinctrl-0 = <&sdcc1_pins>;
 				arm,primecell-periphid = <0x00051180>;
-				reg		= <0x12400000 0x2000>;
-				interrupts	= <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names	= "cmd_irq";
-				clocks		= <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
-				clock-names	= "mclk", "apb_pclk";
-				bus-width	= <8>;
-				max-frequency	= <96000000>;
+				reg = <0x12400000 0x2000>;
+				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "cmd_irq";
+				clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+				clock-names = "mclk", "apb_pclk";
+				bus-width = <8>;
+				max-frequency = <96000000>;
 				non-removable;
 				cap-sd-highspeed;
 				cap-mmc-highspeed;
@@ -1094,36 +1142,36 @@
 			};
 
 			sdcc3: mmc@12180000 {
-				compatible	= "arm,pl18x", "arm,primecell";
+				compatible = "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
-				status		= "disabled";
-				reg		= <0x12180000 0x2000>;
-				interrupts	= <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names	= "cmd_irq";
-				clocks		= <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
-				clock-names	= "mclk", "apb_pclk";
-				bus-width	= <4>;
+				status = "disabled";
+				reg = <0x12180000 0x2000>;
+				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "cmd_irq";
+				clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+				clock-names = "mclk", "apb_pclk";
+				bus-width = <4>;
 				cap-sd-highspeed;
 				cap-mmc-highspeed;
-				max-frequency	= <192000000>;
+				max-frequency = <192000000>;
 				no-1-8-v;
 				dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
 				dma-names = "tx", "rx";
 			};
 
 			sdcc4: mmc@121c0000 {
-				compatible	= "arm,pl18x", "arm,primecell";
+				compatible = "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
-				status		= "disabled";
-				reg		= <0x121c0000 0x2000>;
-				interrupts	= <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names	= "cmd_irq";
-				clocks		= <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
-				clock-names	= "mclk", "apb_pclk";
-				bus-width	= <4>;
+				status = "disabled";
+				reg = <0x121c0000 0x2000>;
+				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "cmd_irq";
+				clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
+				clock-names = "mclk", "apb_pclk";
+				bus-width = <4>;
 				cap-sd-highspeed;
 				cap-mmc-highspeed;
-				max-frequency	= <48000000>;
+				max-frequency = <48000000>;
 				dmas = <&sdcc4bam 2>, <&sdcc4bam 1>;
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
@@ -1238,7 +1286,7 @@
 			reg = <0x5700000 0x70>;
 		};
 
-		dsi0: mdss_dsi@4700000 {
+		dsi0: dsi@4700000 {
 			compatible = "qcom,mdss-dsi-ctrl";
 			label = "MDSS DSI CTRL->0";
 			#address-cells = <1>;
@@ -1268,6 +1316,9 @@
 						<&dsi0_phy 1>;
 			syscon-sfpb = <&mmss_sfpb>;
 			phys = <&dsi0_phy>;
+			phy-names = "dsi";
+			status = "disabled";
+
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1296,9 +1347,10 @@
 				<0x04700300 0x200>,
 				<0x04700500 0x5c>;
 			reg-names = "dsi_pll", "dsi_phy", "dsi_phy_regulator";
-			clock-names = "iface_clk", "ref";
+			clock-names = "iface", "ref";
 			clocks = <&mmcc DSI_M_AHB_CLK>,
 				 <&pxo_board>;
+			status = "disabled";
 		};
 
 
@@ -1367,11 +1419,11 @@
 		};
 
 		pcie: pci@1b500000 {
-			compatible = "qcom,pcie-apq8064", "snps,dw-pcie";
-			reg = <0x1b500000 0x1000
-			       0x1b502000 0x80
-			       0x1b600000 0x100
-			       0x0ff00000 0x100000>;
+			compatible = "qcom,pcie-apq8064";
+			reg = <0x1b500000 0x1000>,
+			      <0x1b502000 0x80>,
+			      <0x1b600000 0x100>,
+			      <0x0ff00000 0x100000>;
 			reg-names = "dbi", "elbi", "parf", "config";
 			device_type = "pci";
 			linux,pci-domain = <0>;
@@ -1379,8 +1431,8 @@
 			num-lanes = <1>;
 			#address-cells = <3>;
 			#size-cells = <2>;
-			ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000   /* I/O */
-				  0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* memory */
+			ranges = <0x81000000 0 0          0x0fe00000 0 0x00100000>, /* I/O */
+				 <0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* mem */
 			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
@@ -1417,7 +1469,6 @@
 				      "slave_iface";
 
 			phys = <&hdmi_phy>;
-			phy-names = "hdmi-phy";
 
 			ports {
 				#address-cells = <1>;
@@ -1545,7 +1596,7 @@
 
 					qcom,mmio = <&riva>;
 
-					bt {
+					bluetooth {
 						compatible = "qcom,wcnss-bt";
 					};
 
diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
index 83793b835d40..91716298ec5e 100644
--- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
@@ -1,4 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/gpio/gpio.h>
 #include "qcom-msm8974.dtsi"
 #include "qcom-pm8841.dtsi"
 #include "qcom-pm8941.dtsi"
@@ -16,331 +17,293 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
 
-	soc {
-		serial@f991e000 {
+&blsp2_i2c5 {
+	status = "okay";
+	clock-frequency = <200000>;
+
+	eeprom: eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+		pagesize = <32>;
+		read-only;
+	};
+};
+
+&otg {
+	status = "okay";
+
+	phys = <&usb_hs2_phy>;
+	phy-select = <&tcsr 0xb000 1>;
+	extcon = <&smbb>, <&usb_id>;
+	vbus-supply = <&chg_otg>;
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+
+	ulpi {
+		phy@b {
 			status = "okay";
+			v3p3-supply = <&pm8941_l24>;
+			v1p8-supply = <&pm8941_l6>;
+			extcon = <&smbb>;
+			qcom,init-seq = /bits/ 8 <0x1 0x63>;
+		};
+	};
+};
+
+&rpm_requests {
+	pm8841-regulators {
+		compatible = "qcom,rpm-pm8841-regulators";
+
+		pm8841_s1: s1 {
+			regulator-min-microvolt = <675000>;
+			regulator-max-microvolt = <1050000>;
 		};
 
-		sdhci@f9824900 {
-			bus-width = <8>;
-			non-removable;
-			status = "okay";
+		pm8841_s2: s2 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
 
-			vmmc-supply = <&pm8941_l20>;
-			vqmmc-supply = <&pm8941_s3>;
+		pm8841_s3: s3 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
 
-			pinctrl-names = "default";
-			pinctrl-0 = <&sdhc1_pin_a>;
+		pm8841_s4: s4 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
 		};
+	};
 
-		sdhci@f98a4900 {
-			cd-gpios = <&msmgpio 62 0x1>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
-			bus-width = <4>;
-			status = "okay";
+	pm8941-regulators {
+		compatible = "qcom,rpm-pm8941-regulators";
+
+		vdd_l1_l3-supply = <&pm8941_s1>;
+		vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+		vdd_l4_l11-supply = <&pm8941_s1>;
+		vdd_l5_l7-supply = <&pm8941_s2>;
+		vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+		vin_5vs-supply = <&pm8941_5v>;
+
+		pm8941_s1: s1 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
 
-			vmmc-supply = <&pm8941_l21>;
-			vqmmc-supply = <&pm8941_l13>;
+		pm8941_s2: s2 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+			regulator-boot-on;
 		};
 
-		usb@f9a55000 {
-			status = "okay";
-			phys = <&usb_hs2_phy>;
-			phy-select = <&tcsr 0xb000 1>;
-			extcon = <&smbb>, <&usb_id>;
-			vbus-supply = <&chg_otg>;
-			hnp-disable;
-			srp-disable;
-			adp-disable;
-			ulpi {
-				phy@b {
-					status = "okay";
-					v3p3-supply = <&pm8941_l24>;
-					v1p8-supply = <&pm8941_l6>;
-					extcon = <&smbb>;
-					qcom,init-seq = /bits/ 8 <0x1 0x63>;
-				};
-			};
-		};
-
-
-		pinctrl@fd510000 {
-			i2c11_pins: i2c11 {
-				mux {
-					pins = "gpio83", "gpio84";
-					function = "blsp_i2c11";
-				};
-			};
-
-			spi8_default: spi8_default {
-				mosi {
-					pins = "gpio45";
-					function = "blsp_spi8";
-				};
-				miso {
-					pins = "gpio46";
-					function = "blsp_spi8";
-				};
-				cs {
-					pins = "gpio47";
-					function = "blsp_spi8";
-				};
-				clk {
-					pins = "gpio48";
-					function = "blsp_spi8";
-				};
-			};
-
-			sdhc1_pin_a: sdhc1-pin-active {
-				clk {
-					pins = "sdc1_clk";
-					drive-strength = <16>;
-					bias-disable;
-				};
-
-				cmd-data {
-					pins = "sdc1_cmd", "sdc1_data";
-					drive-strength = <10>;
-					bias-pull-up;
-				};
-			};
-
-			sdhc2_cd_pin_a: sdhc2-cd-pin-active {
-				pins = "gpio62";
-				function = "gpio";
-
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			sdhc2_pin_a: sdhc2-pin-active {
-				clk {
-					pins = "sdc2_clk";
-					drive-strength = <10>;
-					bias-disable;
-				};
-
-				cmd-data {
-					pins = "sdc2_cmd", "sdc2_data";
-					drive-strength = <6>;
-					bias-pull-up;
-				};
-			};
-		};
-
-		i2c@f9967000 {
-			status = "okay";
-			clock-frequency = <200000>;
-			pinctrl-0 = <&i2c11_pins>;
-			pinctrl-names = "default";
+		pm8941_s3: s3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8941_l3: l3 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8941_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8941_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
 
-			eeprom: eeprom@52 {
-				compatible = "atmel,24c128";
-				reg = <0x52>;
-				pagesize = <32>;
-				read-only;
-			};
+		pm8941_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8941_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8941_l11: l11 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8941_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l15: l15 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8941_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8941_l17: l17 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8941_l18: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8941_l19: l19 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		pm8941_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+			regulator-boot-on;
+		};
+
+		pm8941_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8941_l23: l23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8941_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+			regulator-boot-on;
 		};
 	};
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	vmmc-supply = <&pm8941_l20>;
+	vqmmc-supply = <&pm8941_s3>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_on>;
+	pinctrl-1 = <&sdc1_off>;
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&pm8941_l21>;
+	vqmmc-supply = <&pm8941_l13>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_on>;
+	pinctrl-1 = <&sdc2_off>;
+};
+
+&tlmm {
+	sdc1_on: sdc1-on {
+		clk {
+			pins = "sdc1_clk";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		cmd-data {
+			pins = "sdc1_cmd", "sdc1_data";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+	};
+
+	sdc2_on: sdc2-on {
+		clk {
+			pins = "sdc2_clk";
+			drive-strength = <10>;
+			bias-disable;
+		};
+
+		cmd-data {
+			pins = "sdc2_cmd", "sdc2_data";
+			drive-strength = <6>;
+			bias-pull-up;
+		};
 
-	smd {
-		rpm {
-			rpm_requests {
-				pm8841-regulators {
-					s1 {
-						regulator-min-microvolt = <675000>;
-						regulator-max-microvolt = <1050000>;
-					};
-
-					s2 {
-						regulator-min-microvolt = <500000>;
-						regulator-max-microvolt = <1050000>;
-					};
-
-					s3 {
-						regulator-min-microvolt = <500000>;
-						regulator-max-microvolt = <1050000>;
-					};
-
-					s4 {
-						regulator-min-microvolt = <500000>;
-						regulator-max-microvolt = <1050000>;
-					};
-				};
-
-				pm8941-regulators {
-					vdd_l1_l3-supply = <&pm8941_s1>;
-					vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
-					vdd_l4_l11-supply = <&pm8941_s1>;
-					vdd_l5_l7-supply = <&pm8941_s2>;
-					vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
-					vin_5vs-supply = <&pm8941_5v>;
-
-					s1 {
-						regulator-min-microvolt = <1300000>;
-						regulator-max-microvolt = <1300000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					s2 {
-						regulator-min-microvolt = <2150000>;
-						regulator-max-microvolt = <2150000>;
-						regulator-boot-on;
-					};
-
-					s3 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					l1 {
-						regulator-min-microvolt = <1225000>;
-						regulator-max-microvolt = <1225000>;
-
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					l2 {
-						regulator-min-microvolt = <1200000>;
-						regulator-max-microvolt = <1200000>;
-					};
-
-					l3 {
-						regulator-min-microvolt = <1225000>;
-						regulator-max-microvolt = <1225000>;
-					};
-
-					l4 {
-						regulator-min-microvolt = <1225000>;
-						regulator-max-microvolt = <1225000>;
-					};
-
-					l5 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					l6 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-
-						regulator-boot-on;
-					};
-
-					l7 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-
-						regulator-boot-on;
-					};
-
-					l8 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					l9 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <2950000>;
-					};
-
-					l10 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-						regulator-always-on;
-					};
-
-					l11 {
-						regulator-min-microvolt = <1300000>;
-						regulator-max-microvolt = <1300000>;
-					};
-
-					l12 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					l13 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <2950000>;
-
-						regulator-boot-on;
-					};
-
-					l14 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					l15 {
-						regulator-min-microvolt = <2050000>;
-						regulator-max-microvolt = <2050000>;
-					};
-
-					l16 {
-						regulator-min-microvolt = <2700000>;
-						regulator-max-microvolt = <2700000>;
-					};
-
-					l17 {
-						regulator-min-microvolt = <2700000>;
-						regulator-max-microvolt = <2700000>;
-					};
-
-					l18 {
-						regulator-min-microvolt = <2850000>;
-						regulator-max-microvolt = <2850000>;
-					};
-
-					l19 {
-						regulator-min-microvolt = <3300000>;
-						regulator-max-microvolt = <3300000>;
-						regulator-always-on;
-					};
-
-					l20 {
-						regulator-min-microvolt = <2950000>;
-						regulator-max-microvolt = <2950000>;
-
-						regulator-allow-set-load;
-						regulator-boot-on;
-						regulator-system-load = <200000>;
-					};
-
-					l21 {
-						regulator-min-microvolt = <2950000>;
-						regulator-max-microvolt = <2950000>;
-
-						regulator-boot-on;
-					};
-
-					l22 {
-						regulator-min-microvolt = <3000000>;
-						regulator-max-microvolt = <3000000>;
-					};
-
-					l23 {
-						regulator-min-microvolt = <3000000>;
-						regulator-max-microvolt = <3000000>;
-					};
-
-					l24 {
-						regulator-min-microvolt = <3075000>;
-						regulator-max-microvolt = <3075000>;
-
-						regulator-boot-on;
-					};
-				};
-			};
+		cd {
+			pins = "gpio62";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
index 52240fc7a1a6..f2fb7c975af8 100644
--- a/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -95,7 +95,7 @@
 
 	firmware {
 		scm {
-			compatible = "qcom,scm";
+			compatible = "qcom,scm-apq8084", "qcom,scm";
 			clocks = <&gcc GCC_CE1_CLK> , <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
 			clock-names = "core", "bus", "iface";
 		};
@@ -239,11 +239,16 @@
 			reg = <0xf9011000 0x1000>;
 		};
 
+		sram@fc190000 {
+			compatible = "qcom,apq8084-rpm-stats";
+			reg = <0xfc190000 0x10000>;
+		};
+
 		qfprom: qfprom@fc4bc000 {
+			compatible = "qcom,apq8084-qfprom", "qcom,qfprom";
+			reg = <0xfc4bc000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "qcom,qfprom";
-			reg = <0xfc4bc000 0x1000>;
 			tsens_calib: calib@d0 {
 				reg = <0xd0 0x18>;
 			};
@@ -383,14 +388,9 @@
 			reg = <0xfc400000 0x4000>;
 		};
 
-		tcsr_mutex_regs: syscon@fd484000 {
-			compatible = "syscon";
-			reg = <0xfd484000 0x2000>;
-		};
-
-		tcsr_mutex: hwlock {
-			compatible = "qcom,tcsr-mutex";
-			syscon = <&tcsr_mutex_regs 0 0x80>;
+		tcsr_mutex: hwlock@fd484000 {
+			compatible = "qcom,apq8084-tcsr-mutex", "qcom,tcsr-mutex";
+			reg = <0xfd484000 0x1000>;
 			#hwlock-cells = <1>;
 		};
 
@@ -419,29 +419,29 @@
 			status = "disabled";
 		};
 
-		sdhci@f9824900 {
+		mmc@f9824900 {
 			compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
-			reg-names = "hc_mem", "core_mem";
+			reg-names = "hc", "core";
 			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
-				 <&gcc GCC_SDCC1_AHB_CLK>,
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
 				 <&xo_board>;
-			clock-names = "core", "iface", "xo";
+			clock-names = "iface", "core", "xo";
 			status = "disabled";
 		};
 
-		sdhci@f98a4900 {
+		mmc@f98a4900 {
 			compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
-			reg-names = "hc_mem", "core_mem";
+			reg-names = "hc", "core";
 			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
-				 <&gcc GCC_SDCC2_AHB_CLK>,
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
 				 <&xo_board>;
-			clock-names = "core", "iface", "xo";
+			clock-names = "iface", "core", "xo";
 			status = "disabled";
 		};
 
@@ -470,7 +470,7 @@
 			qcom,ipc = <&apcs 8 0>;
 			qcom,smd-edge = <15>;
 
-			rpm_requests {
+			rpm-requests {
 				compatible = "qcom,rpm-apq8084";
 				qcom,smd-channels = "rpm_requests";
 
diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts
index 028ac8e24797..cf7da1ab177c 100644
--- a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts
+++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
+#include <dt-bindings/leds/common.h>
 #include "qcom-ipq4018-ap120c-ac.dtsi"
 
 / {
@@ -10,17 +11,22 @@
 
 		power {
 			label = "ap120c-ac:green:power";
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
 
 		wlan {
 			label = "ap120c-ac:green:wlan";
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
 		};
 
 		support {
 			label = "ap120c-ac:green:support";
+			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
 			panic-indicator;
 		};
diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
index b7916fc26d68..c4f89b712fd9 100644
--- a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
+++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
+#include <dt-bindings/leds/common.h>
 #include "qcom-ipq4018-ap120c-ac.dtsi"
 
 / {
@@ -8,18 +9,24 @@
 
 		status: status {
 			label = "ap120c-ac:blue:status";
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_BLUE>;
 			gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
 		};
 
 		wlan2g {
 			label = "ap120c-ac:green:wlan2g";
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "phy0tpt";
 		};
 
 		wlan5g {
 			label = "ap120c-ac:red:wlan5g";
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_RED>;
 			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "phy1tpt";
 		};
diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi
index 1f3b1ce82108..af9a26fb5d4a 100644
--- a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi
@@ -11,7 +11,7 @@
 	keys {
 		compatible = "gpio-keys";
 
-		reset {
+		key-reset {
 			label = "reset";
 			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_RESTART>;
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
index 0c10d9e096db..0505270cf508 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
@@ -14,6 +14,7 @@
  *
  */
 
+#include <dt-bindings/gpio/gpio.h>
 #include "qcom-ipq4019.dtsi"
 
 / {
@@ -64,7 +65,7 @@
 			};
 		};
 
-		blsp_dma: dma@7884000 {
+		blsp_dma: dma-controller@7884000 {
 			status = "okay";
 		};
 
@@ -72,7 +73,7 @@
 			pinctrl-0 = <&spi_0_pins>;
 			pinctrl-names = "default";
 			status = "okay";
-			cs-gpios = <&tlmm 54 0>;
+			cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
 
 			mx25l25635e@0 {
 				#address-cells = <1>;
@@ -89,7 +90,7 @@
 			status = "okay";
 		};
 
-		cryptobam: dma@8e04000 {
+		cryptobam: dma-controller@8e04000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
index a7b1201dd614..79b0c6318e52 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
@@ -8,7 +8,7 @@
 	compatible = "qcom,ipq4019-dk04.1-c1", "qcom,ipq4019";
 
 	soc {
-		dma@7984000 {
+		dma-controller@7984000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
index 7a337dc08741..a63b3778636d 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
@@ -79,7 +79,7 @@
 			status = "okay";
 		};
 
-		dma@7884000 {
+		dma-controller@7884000 {
 			status = "okay";
 		};
 
@@ -87,20 +87,20 @@
 			pinctrl-0 = <&spi_0_pins>;
 			pinctrl-names = "default";
 			status = "okay";
-			cs-gpios = <&tlmm 12 0>;
+			cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
 
-			m25p80@0 {
+			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				reg = <0>;
-				compatible = "n25q128a11";
+				compatible = "micron,n25q128a11", "jedec,spi-nor";
 				spi-max-frequency = <24000000>;
 			};
 		};
 
 		pci@40000000 {
 			status = "okay";
-			perst-gpio = <&tlmm 38 0x1>;
+			perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 		};
 
 		qpic-nand@79b0000 {
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
index 06f9f2cb2fe9..ea2987fcbff8 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 // Copyright (c) 2018, The Linux Foundation. All rights reserved.
 
+#include <dt-bindings/gpio/gpio.h>
 #include "qcom-ipq4019-ap.dk07.1.dtsi"
 
 / {
@@ -10,7 +11,7 @@
 	soc {
 		pci@40000000 {
 			status = "okay";
-			perst-gpio = <&tlmm 38 0x1>;
+			perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 		};
 
 		spi@78b6000 {
@@ -50,13 +51,13 @@
 			pinctrl-0 = <&spi_0_pins>;
 			pinctrl-names = "default";
 			status = "okay";
-			cs-gpios = <&tlmm 12 0>;
+			cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
 
-			m25p80@0 {
+			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				reg = <0>;
-				compatible = "n25q128a11";
+				compatible = "micron,n25q128a11", "jedec,spi-nor";
 				spi-max-frequency = <24000000>;
 			};
 		};
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
index 94872518b5a2..0107f552f520 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
@@ -52,7 +52,7 @@
 			status = "okay";
 		};
 
-		dma@7884000 {
+		dma-controller@7884000 {
 			status = "okay";
 		};
 
@@ -62,7 +62,7 @@
 			status = "okay";
 		};
 
-		dma@7984000 {
+		dma-controller@7984000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index 7dec0553636e..b23591110bd2 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -142,7 +142,8 @@
 	clocks {
 		sleep_clk: sleep_clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32768>;
+			clock-frequency = <32000>;
+			clock-output-names = "gcc_sleep_clk_src";
 			#clock-cells = <0>;
 		};
 
@@ -155,7 +156,7 @@
 
 	firmware {
 		scm {
-			compatible = "qcom,scm-ipq4019";
+			compatible = "qcom,scm-ipq4019", "qcom,scm";
 		};
 	};
 
@@ -186,6 +187,7 @@
 		gcc: clock-controller@1800000 {
 			compatible = "qcom,gcc-ipq4019";
 			#clock-cells = <1>;
+			#power-domain-cells = <1>;
 			#reset-cells = <1>;
 			reg = <0x1800000 0x60000>;
 		};
@@ -219,19 +221,20 @@
 			status = "disabled";
 		};
 
-		sdhci: sdhci@7824900 {
+		sdhci: mmc@7824900 {
 			compatible = "qcom,sdhci-msm-v4";
 			reg = <0x7824900 0x11c>, <0x7824000 0x800>;
+			reg-names = "hc", "core";
 			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hc_irq", "pwr_irq";
 			bus-width = <8>;
-			clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>,
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>, <&gcc GCC_SDCC1_APPS_CLK>,
 				 <&gcc GCC_DCD_XO_CLK>;
-			clock-names = "core", "iface", "xo";
+			clock-names = "iface", "core", "xo";
 			status = "disabled";
 		};
 
-		blsp_dma: dma@7884000 {
+		blsp_dma: dma-controller@7884000 {
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0x07884000 0x23000>;
 			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
@@ -251,8 +254,8 @@
 			clock-names = "core", "iface";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			dmas = <&blsp_dma 5>, <&blsp_dma 4>;
-			dma-names = "rx", "tx";
+			dmas = <&blsp_dma 4>, <&blsp_dma 5>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -265,8 +268,8 @@
 			clock-names = "core", "iface";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			dmas = <&blsp_dma 7>, <&blsp_dma 6>;
-			dma-names = "rx", "tx";
+			dmas = <&blsp_dma 6>, <&blsp_dma 7>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -274,13 +277,13 @@
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x78b7000 0x600>;
 			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
-				 <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>;
-			clock-names = "iface", "core";
+			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			dmas = <&blsp_dma 9>, <&blsp_dma 8>;
-			dma-names = "rx", "tx";
+			dmas = <&blsp_dma 8>, <&blsp_dma 9>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -288,17 +291,17 @@
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x78b8000 0x600>;
 			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
-				 <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
-			clock-names = "iface", "core";
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			dmas = <&blsp_dma 11>, <&blsp_dma 10>;
-			dma-names = "rx", "tx";
+			dmas = <&blsp_dma 10>, <&blsp_dma 11>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
-		cryptobam: dma@8e04000 {
+		cryptobam: dma-controller@8e04000 {
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0x08e04000 0x20000>;
 			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
@@ -380,8 +383,8 @@
 			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
 				<&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
-			dmas = <&blsp_dma 1>, <&blsp_dma 0>;
-			dma-names = "rx", "tx";
+			dmas = <&blsp_dma 0>, <&blsp_dma 1>;
+			dma-names = "tx", "rx";
 		};
 
 		blsp1_uart2: serial@78b0000 {
@@ -392,8 +395,8 @@
 			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
 				<&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
-			dmas = <&blsp_dma 3>, <&blsp_dma 2>;
-			dma-names = "rx", "tx";
+			dmas = <&blsp_dma 2>, <&blsp_dma 3>;
+			dma-names = "tx", "rx";
 		};
 
 		watchdog: watchdog@b017000 {
@@ -410,7 +413,7 @@
 		};
 
 		pcie0: pci@40000000 {
-			compatible = "qcom,pcie-ipq4019", "snps,dw-pcie";
+			compatible = "qcom,pcie-ipq4019";
 			reg =  <0x40000000 0xf1d
 				0x40000f20 0xa8
 				0x80000 0x2000
@@ -469,7 +472,7 @@
 			status = "disabled";
 		};
 
-		qpic_bam: dma@7984000 {
+		qpic_bam: dma-controller@7984000 {
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0x7984000 0x1a000>;
 			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
@@ -644,7 +647,7 @@
 			clocks = <&gcc GCC_USB3_MASTER_CLK>,
 				 <&gcc GCC_USB3_SLEEP_CLK>,
 				 <&gcc GCC_USB3_MOCK_UTMI_CLK>;
-			clock-names = "master", "sleep", "mock_utmi";
+			clock-names = "core", "sleep", "mock_utmi";
 			ranges;
 			status = "disabled";
 
diff --git a/arch/arm/boot/dts/qcom-ipq8062-smb208.dtsi b/arch/arm/boot/dts/qcom-ipq8062-smb208.dtsi
new file mode 100644
index 000000000000..9d06255104c7
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq8062-smb208.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "qcom-ipq8062.dtsi"
+
+&rpm {
+	smb208_regulators: regulators {
+		compatible = "qcom,rpm-smb208-regulators";
+
+		smb208_s1a: s1a {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1150000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s1b: s1b {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1150000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s2a: s2a {
+			regulator-min-microvolt = < 800000>;
+			regulator-max-microvolt = <1150000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s2b: s2b {
+			regulator-min-microvolt = < 800000>;
+			regulator-max-microvolt = <1150000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-ipq8062.dtsi b/arch/arm/boot/dts/qcom-ipq8062.dtsi
new file mode 100644
index 000000000000..5d3ebd3e2e51
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq8062.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "qcom-ipq8064-v2.0.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ8062";
+	compatible = "qcom,ipq8062", "qcom,ipq8064";
+};
diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
index b63d01d10189..a654d3c22c4f 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -7,12 +7,6 @@
 
 	soc {
 		pinmux@800000 {
-			i2c4_pins: i2c4_pinmux {
-				pins = "gpio12", "gpio13";
-				function = "gsbi4";
-				bias-disable;
-			};
-
 			buttons_pins: buttons_pins {
 				mux {
 					pins = "gpio54", "gpio65";
diff --git a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
index 596d129d4a95..5a65cce2500c 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-ipq8064.dtsi"
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 
 / {
 	model = "MikroTik RB3011UiAS-RM";
@@ -187,12 +188,12 @@
 			};
 		};
 
-		gpio_keys {
+		gpio-keys {
 			compatible = "gpio-keys";
 			pinctrl-0 = <&buttons_pins>;
 			pinctrl-names = "default";
 
-			button@1 {
+			button {
 				label = "reset";
 				linux,code = <KEY_RESTART>;
 				gpios = <&qcom_pinmux 66 GPIO_ACTIVE_LOW>;
@@ -208,6 +209,7 @@
 
 			led@7 {
 				label = "rb3011:green:user";
+				color = <LED_COLOR_ID_GREEN>;
 				gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>;
 				default-state = "off";
 			};
@@ -305,15 +307,6 @@
 		};
 	};
 
-	mdio0_pins: mdio0_pins {
-		mux {
-			pins = "gpio0", "gpio1";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
 	mdio1_pins: mdio1_pins {
 		mux {
 			pins = "gpio10", "gpio11";
diff --git a/arch/arm/boot/dts/qcom-ipq8064-smb208.dtsi b/arch/arm/boot/dts/qcom-ipq8064-smb208.dtsi
new file mode 100644
index 000000000000..ac9c44f0c164
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq8064-smb208.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "qcom-ipq8064.dtsi"
+
+&rpm {
+	smb208_regulators: regulators {
+		compatible = "qcom,rpm-smb208-regulators";
+
+		smb208_s1a: s1a {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1150000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s1b: s1b {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1150000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s2a: s2a {
+			regulator-min-microvolt = < 800000>;
+			regulator-max-microvolt = <1250000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s2b: s2b {
+			regulator-min-microvolt = < 800000>;
+			regulator-max-microvolt = <1250000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
index 65330065390a..411c8d63c38e 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-ipq8064.dtsi"
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ8064-v1.0";
@@ -36,7 +37,7 @@
 
 				cs-gpios = <&qcom_pinmux 20 0>;
 
-				flash: m25p80@0 {
+				flash: flash@0 {
 					compatible = "s25fl256s1";
 					#address-cells = <1>;
 					#size-cells = <1>;
@@ -65,19 +66,19 @@
 			status = "okay";
 		};
 
-		gpio_keys {
+		gpio-keys {
 			compatible = "gpio-keys";
 			pinctrl-0 = <&buttons_pins>;
 			pinctrl-names = "default";
 
-			button@1 {
+			button-1 {
 				label = "reset";
 				linux,code = <KEY_RESTART>;
 				gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
 				linux,input-type = <1>;
 				debounce-interval = <60>;
 			};
-			button@2 {
+			button-2 {
 				label = "wps";
 				linux,code = <KEY_WPS_BUTTON>;
 				gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
@@ -107,6 +108,7 @@
 
 			led@9 {
 				label = "status_led_fail";
+				function = LED_FUNCTION_STATUS;
 				gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
 				default-state = "off";
 			};
@@ -119,6 +121,7 @@
 
 			led@53 {
 				label = "status_led_pass";
+				function = LED_FUNCTION_STATUS;
 				gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
 				default-state = "off";
 			};
diff --git a/arch/arm/boot/dts/qcom-ipq8064-v2.0-smb208.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v2.0-smb208.dtsi
new file mode 100644
index 000000000000..0442580b22de
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq8064-v2.0-smb208.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "qcom-ipq8064-v2.0.dtsi"
+
+&rpm {
+	smb208_regulators: regulators {
+		compatible = "qcom,rpm-smb208-regulators";
+
+		smb208_s1a: s1a {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1150000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s1b: s1b {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1150000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s2a: s2a {
+			regulator-min-microvolt = < 800000>;
+			regulator-max-microvolt = <1250000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s2b: s2b {
+			regulator-min-microvolt = < 800000>;
+			regulator-max-microvolt = <1250000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi
new file mode 100644
index 000000000000..2f117d576daf
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "qcom-ipq8064.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ8064-v2.0";
+
+	aliases {
+		serial0 = &gsbi4_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		rsvd@41200000 {
+			reg = <0x41200000 0x300000>;
+			no-map;
+		};
+	};
+};
+
+&gsbi4 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+
+	serial@16340000 {
+		status = "okay";
+	};
+	/*
+	 * The i2c device on gsbi4 should not be enabled.
+	 * On ipq806x designs gsbi4 i2c is meant for exclusive
+	 * RPM usage. Turning this on in kernel manifests as
+	 * i2c failure for the RPM.
+	 */
+};
+
+&pcie0 {
+	compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&pcie1 {
+	compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&pcie2 {
+	compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&sata {
+	ports-implemented = <0x1>;
+};
+
+&ss_phy_0 {
+	qcom,rx-eq = <2>;
+	qcom,tx-deamp_3_5db = <32>;
+	qcom,mpll = <5>;
+};
+
+&ss_phy_1 {
+	qcom,rx-eq = <2>;
+	qcom,tx-deamp_3_5db = <32>;
+	qcom,mpll = <5>;
+};
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 996f4458d9fc..90c08b51680a 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -292,19 +292,22 @@
 		};
 
 		smem: smem@41000000 {
+			compatible = "qcom,smem";
 			reg = <0x41000000 0x200000>;
 			no-map;
+
+			hwlocks = <&sfpb_mutex 3>;
 		};
 	};
 
 	clocks {
-		cxo_board {
+		cxo_board: cxo_board {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <25000000>;
 		};
 
-		pxo_board {
+		pxo_board: pxo_board {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <25000000>;
@@ -329,24 +332,64 @@
 		ranges;
 		compatible = "simple-bus";
 
-		lpass@28100000 {
-			compatible = "qcom,lpass-cpu";
-			status = "disabled";
-			clocks = <&lcc AHBIX_CLK>,
-					<&lcc MI2S_OSR_CLK>,
-					<&lcc MI2S_BIT_CLK>;
-			clock-names = "ahbix-clk",
-					"mi2s-osr-clk",
-					"mi2s-bit-clk";
-			interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "lpass-irq-lpaif";
-			reg = <0x28100000 0x10000>;
-			reg-names = "lpass-lpaif";
+		stmmac_axi_setup: stmmac-axi-config {
+			snps,wr_osr_lmt = <7>;
+			snps,rd_osr_lmt = <7>;
+			snps,blen = <16 0 0 0 0 0 0>;
+		};
+
+		vsdcc_fixed: vsdcc-regulator {
+			compatible = "regulator-fixed";
+			regulator-name = "SDCC Power";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		rpm: rpm@108000 {
+			compatible = "qcom,rpm-ipq8064";
+			reg = <0x00108000 0x1000>;
+			qcom,ipc = <&l2cc 0x8 2>;
+
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ack", "err", "wakeup";
+
+			clocks = <&gcc RPM_MSG_RAM_H_CLK>;
+			clock-names = "ram";
+
+			rpmcc: clock-controller {
+				compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc";
+				#clock-cells = <1>;
+			};
+		};
+
+		qcom,ssbi@500000 {
+			compatible = "qcom,ssbi";
+			reg = <0x00500000 0x1000>;
+			qcom,controller-type = "pmic-arbiter";
+		};
+
+		qfprom: qfprom@700000 {
+			compatible = "qcom,ipq8064-qfprom", "qcom,qfprom";
+			reg = <0x00700000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			speedbin_efuse: speedbin@c0 {
+				reg = <0xc0 0x4>;
+			};
+			tsens_calib: calib@400 {
+				reg = <0x400 0xb>;
+			};
+			tsens_calib_backup: calib_backup@410 {
+				reg = <0x410 0xb>;
+			};
 		};
 
 		qcom_pinmux: pinmux@800000 {
 			compatible = "qcom,ipq8064-pinctrl";
-			reg = <0x800000 0x4000>;
+			reg = <0x00800000 0x4000>;
 
 			gpio-controller;
 			gpio-ranges = <&qcom_pinmux 0 0 69>;
@@ -382,6 +425,13 @@
 				};
 			};
 
+			i2c4_pins: i2c4-default {
+				pins = "gpio12", "gpio13";
+				function = "gsbi4";
+				drive-strength = <12>;
+				bias-disable;
+			};
+
 			spi_pins: spi_pins {
 				mux {
 					pins = "gpio18", "gpio19", "gpio21";
@@ -424,6 +474,8 @@
 
 				pullups {
 					pins = "gpio39";
+					function = "nand";
+					drive-strength = <10>;
 					bias-pull-up;
 				};
 
@@ -431,9 +483,61 @@
 					pins = "gpio40", "gpio41", "gpio42",
 					       "gpio43", "gpio44", "gpio45",
 					       "gpio46", "gpio47";
+					function = "nand";
+					drive-strength = <10>;
 					bias-bus-hold;
 				};
 			};
+
+			mdio0_pins: mdio0-pins {
+				mux {
+					pins = "gpio0", "gpio1";
+					function = "mdio";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
+
+			rgmii2_pins: rgmii2-pins {
+				mux {
+					pins = "gpio27", "gpio28", "gpio29",
+					       "gpio30", "gpio31", "gpio32",
+					       "gpio51", "gpio52", "gpio59",
+					       "gpio60", "gpio61", "gpio62";
+					function = "rgmii2";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
+		};
+
+		gcc: clock-controller@900000 {
+			compatible = "qcom,gcc-ipq8064", "syscon";
+			clocks = <&pxo_board>, <&cxo_board>;
+			clock-names = "pxo", "cxo";
+			reg = <0x00900000 0x4000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+
+			tsens: thermal-sensor@900000 {
+				compatible = "qcom,ipq8064-tsens";
+
+				nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
+				nvmem-cell-names = "calib", "calib_backup";
+				interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "uplow";
+
+				#qcom,sensors = <11>;
+				#thermal-sensor-cells = <1>;
+			};
+		};
+
+		sfpb_mutex: hwlock@1200600 {
+			compatible = "qcom,sfpb-mutex";
+			reg = <0x01200600 0x100>;
+
+			#hwlock-cells = <1>;
 		};
 
 		intc: interrupt-controller@2000000 {
@@ -465,46 +569,236 @@
 			cpu-offset = <0x80000>;
 		};
 
+		l2cc: clock-controller@2011000 {
+			compatible = "qcom,kpss-gcc", "syscon";
+			reg = <0x02011000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			clock-output-names = "acpu_l2_aux";
+		};
+
 		acc0: clock-controller@2088000 {
 			compatible = "qcom,kpss-acc-v1";
 			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
 		};
 
+		saw0: regulator@2089000 {
+			compatible = "qcom,saw2";
+			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
 		acc1: clock-controller@2098000 {
 			compatible = "qcom,kpss-acc-v1";
 			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
 		};
 
-		adm_dma: dma-controller@18300000 {
-			compatible = "qcom,adm";
-			reg = <0x18300000 0x100000>;
-			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
-			#dma-cells = <1>;
+		saw1: regulator@2099000 {
+			compatible = "qcom,saw2";
+			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
 
-			clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
-			clock-names = "core", "iface";
+		nss_common: syscon@03000000 {
+			compatible = "syscon";
+			reg = <0x03000000 0x0000FFFF>;
+		};
 
-			resets = <&gcc ADM0_RESET>,
-				 <&gcc ADM0_PBUS_RESET>,
-				 <&gcc ADM0_C0_RESET>,
-				 <&gcc ADM0_C1_RESET>,
-				 <&gcc ADM0_C2_RESET>;
-			reset-names = "clk", "pbus", "c0", "c1", "c2";
-			qcom,ee = <0>;
+		usb3_0: usb3@100f8800 {
+			compatible = "qcom,ipq8064-dwc3", "qcom,dwc3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x100f8800 0x8000>;
+			clocks = <&gcc USB30_0_MASTER_CLK>;
+			clock-names = "core";
+
+			ranges;
+
+			resets = <&gcc USB30_0_MASTER_RESET>;
+			reset-names = "master";
 
 			status = "disabled";
+
+			dwc3_0: dwc3@10000000 {
+				compatible = "snps,dwc3";
+				reg = <0x10000000 0xcd00>;
+				interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&hs_phy_0>, <&ss_phy_0>;
+				phy-names = "usb2-phy", "usb3-phy";
+				dr_mode = "host";
+				snps,dis_u3_susphy_quirk;
+			};
 		};
 
-		saw0: regulator@2089000 {
-			compatible = "qcom,saw2";
-			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
-			regulator;
+		hs_phy_0: phy@100f8800 {
+			compatible = "qcom,ipq806x-usb-phy-hs";
+			reg = <0x100f8800 0x30>;
+			clocks = <&gcc USB30_0_UTMI_CLK>;
+			clock-names = "ref";
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
-		saw1: regulator@2099000 {
-			compatible = "qcom,saw2";
-			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
-			regulator;
+		ss_phy_0: phy@100f8830 {
+			compatible = "qcom,ipq806x-usb-phy-ss";
+			reg = <0x100f8830 0x30>;
+			clocks = <&gcc USB30_0_MASTER_CLK>;
+			clock-names = "ref";
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb3_1: usb3@110f8800 {
+			compatible = "qcom,ipq8064-dwc3", "qcom,dwc3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x110f8800 0x8000>;
+			clocks = <&gcc USB30_1_MASTER_CLK>;
+			clock-names = "core";
+
+			ranges;
+
+			resets = <&gcc USB30_1_MASTER_RESET>;
+			reset-names = "master";
+
+			status = "disabled";
+
+			dwc3_1: dwc3@11000000 {
+				compatible = "snps,dwc3";
+				reg = <0x11000000 0xcd00>;
+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&hs_phy_1>, <&ss_phy_1>;
+				phy-names = "usb2-phy", "usb3-phy";
+				dr_mode = "host";
+				snps,dis_u3_susphy_quirk;
+			};
+		};
+
+		hs_phy_1: phy@110f8800 {
+			compatible = "qcom,ipq806x-usb-phy-hs";
+			reg = <0x110f8800 0x30>;
+			clocks = <&gcc USB30_1_UTMI_CLK>;
+			clock-names = "ref";
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		ss_phy_1: phy@110f8830 {
+			compatible = "qcom,ipq806x-usb-phy-ss";
+			reg = <0x110f8830 0x30>;
+			clocks = <&gcc USB30_1_MASTER_CLK>;
+			clock-names = "ref";
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		sdcc3bam: dma-controller@12182000 {
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12182000 0x8000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC3_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		sdcc1bam: dma-controller@12402000 {
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12402000 0x8000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC1_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		amba: amba {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sdcc3: mmc@12180000 {
+				compatible = "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				status = "disabled";
+				reg = <0x12180000 0x2000>;
+				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "cmd_irq";
+				clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+				clock-names = "mclk", "apb_pclk";
+				bus-width = <8>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				max-frequency = <192000000>;
+				sd-uhs-sdr104;
+				sd-uhs-ddr50;
+				vqmmc-supply = <&vsdcc_fixed>;
+				dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
+				dma-names = "tx", "rx";
+			};
+
+			sdcc1: mmc@12400000 {
+				status = "disabled";
+				compatible = "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				reg = <0x12400000 0x2000>;
+				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "cmd_irq";
+				clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+				clock-names = "mclk", "apb_pclk";
+				bus-width = <8>;
+				max-frequency = <96000000>;
+				non-removable;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				mmc-ddr-1_8v;
+				vmmc-supply = <&vsdcc_fixed>;
+				dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		gsbi1: gsbi@12440000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			reg = <0x12440000 0x100>;
+			cell-index = <1>;
+			clocks = <&gcc GSBI1_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon-tcsr = <&tcsr>;
+
+			status = "disabled";
+
+			gsbi1_serial: serial@12450000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x12450000 0x100>,
+				      <0x12400000 0x03>;
+				interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
+				clock-names = "core", "iface";
+
+				status = "disabled";
+			};
+
+			gsbi1_i2c: i2c@12460000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x12460000 0x1000>;
+				interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
+				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
 		};
 
 		gsbi2: gsbi@12480000 {
@@ -530,7 +824,7 @@
 				status = "disabled";
 			};
 
-			i2c@124a0000 {
+			gsbi2_i2c: i2c@124a0000 {
 				compatible = "qcom,i2c-qup-v1.1.1";
 				reg = <0x124a0000 0x1000>;
 				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
@@ -581,6 +875,106 @@
 			};
 		};
 
+		gsbi6: gsbi@16500000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			reg = <0x16500000 0x100>;
+			cell-index = <6>;
+			clocks = <&gcc GSBI6_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon-tcsr = <&tcsr>;
+
+			status = "disabled";
+
+			gsbi6_i2c: i2c@16580000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x16580000 0x1000>;
+				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>;
+				clock-names = "core", "iface";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			gsbi6_spi: spi@16580000 {
+				compatible = "qcom,spi-qup-v1.1.1";
+				reg = <0x16580000 0x1000>;
+				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>;
+				clock-names = "core", "iface";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		gsbi7: gsbi@16600000 {
+			status = "disabled";
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <7>;
+			reg = <0x16600000 0x100>;
+			clocks = <&gcc GSBI7_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			syscon-tcsr = <&tcsr>;
+
+			gsbi7_serial: serial@16640000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16640000 0x1000>,
+				      <0x16600000 0x1000>;
+				interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			gsbi7_i2c: i2c@16680000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x16680000 0x1000>;
+				interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>;
+				clock-names = "core", "iface";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		adm_dma: dma-controller@18300000 {
+			compatible = "qcom,adm";
+			reg = <0x18300000 0x100000>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+
+			clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
+			clock-names = "core", "iface";
+
+			resets = <&gcc ADM0_RESET>,
+				 <&gcc ADM0_PBUS_RESET>,
+				 <&gcc ADM0_C0_RESET>,
+				 <&gcc ADM0_C1_RESET>,
+				 <&gcc ADM0_C2_RESET>;
+			reset-names = "clk", "pbus", "c0", "c1", "c2";
+			qcom,ee = <0>;
+
+			status = "disabled";
+		};
+
 		gsbi5: gsbi@1a200000 {
 			compatible = "qcom,gsbi-v1.0.0";
 			cell-index = <5>;
@@ -588,6 +982,7 @@
 			clocks = <&gcc GSBI5_H_CLK>;
 			clock-names = "iface";
 			#address-cells = <1>;
+
 			#size-cells = <1>;
 			ranges;
 			status = "disabled";
@@ -631,27 +1026,9 @@
 			};
 		};
 
-		gsbi7: gsbi@16600000 {
-			status = "disabled";
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <7>;
-			reg = <0x16600000 0x100>;
-			clocks = <&gcc GSBI7_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			syscon-tcsr = <&tcsr>;
-
-			gsbi7_serial: serial@16640000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x16640000 0x1000>,
-				      <0x16600000 0x1000>;
-				interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
+		tcsr: syscon@1a400000 {
+			compatible = "qcom,tcsr-ipq8064", "syscon";
+			reg = <0x1a400000 0x100>;
 		};
 
 		rng@1a500000 {
@@ -661,17 +1038,6 @@
 			clock-names = "core";
 		};
 
-		sata_phy: sata-phy@1b400000 {
-			compatible = "qcom,ipq806x-sata-phy";
-			reg = <0x1b400000 0x200>;
-
-			clocks = <&gcc SATA_PHY_CFG_CLK>;
-			clock-names = "cfg";
-
-			#phy-cells = <0>;
-			status = "disabled";
-		};
-
 		nand: nand-controller@1ac00000 {
 			compatible = "qcom,ipq806x-nand";
 			reg = <0x1ac00000 0x800>;
@@ -694,106 +1060,17 @@
 			status = "disabled";
 		};
 
-		sata: sata@29000000 {
-			compatible = "qcom,ipq806x-ahci", "generic-ahci";
-			reg = <0x29000000 0x180>;
-
-			interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
-
-			clocks = <&gcc SFAB_SATA_S_H_CLK>,
-				 <&gcc SATA_H_CLK>,
-				 <&gcc SATA_A_CLK>,
-				 <&gcc SATA_RXOOB_CLK>,
-				 <&gcc SATA_PMALIVE_CLK>;
-			clock-names = "slave_face", "iface", "core",
-					"rxoob", "pmalive";
+		sata_phy: sata-phy@1b400000 {
+			compatible = "qcom,ipq806x-sata-phy";
+			reg = <0x1b400000 0x200>;
 
-			assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>;
-			assigned-clock-rates = <100000000>, <100000000>;
+			clocks = <&gcc SATA_PHY_CFG_CLK>;
+			clock-names = "cfg";
 
-			phys = <&sata_phy>;
-			phy-names = "sata-phy";
+			#phy-cells = <0>;
 			status = "disabled";
 		};
 
-		qcom,ssbi@500000 {
-			compatible = "qcom,ssbi";
-			reg = <0x00500000 0x1000>;
-			qcom,controller-type = "pmic-arbiter";
-		};
-
-		qfprom: qfprom@700000 {
-			compatible = "qcom,qfprom";
-			reg = <0x00700000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			tsens_calib: calib@400 {
-				reg = <0x400 0xb>;
-			};
-			tsens_calib_backup: calib_backup@410 {
-				reg = <0x410 0xb>;
-			};
-		};
-
-		gcc: clock-controller@900000 {
-			compatible = "qcom,gcc-ipq8064";
-			reg = <0x00900000 0x4000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-
-			tsens: thermal-sensor@900000 {
-				compatible = "qcom,ipq8064-tsens";
-
-				nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
-				nvmem-cell-names = "calib", "calib_backup";
-				interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "uplow";
-
-				#qcom,sensors = <11>;
-				#thermal-sensor-cells = <1>;
-			};
-		};
-
-		rpm: rpm@108000 {
-			compatible = "qcom,rpm-ipq8064";
-			reg = <0x108000 0x1000>;
-			qcom,ipc = <&l2cc 0x8 2>;
-
-			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "ack", "err", "wakeup";
-
-			clocks = <&gcc RPM_MSG_RAM_H_CLK>;
-			clock-names = "ram";
-
-			rpmcc: clock-controller {
-				compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc";
-				#clock-cells = <1>;
-			};
-		};
-
-		tcsr: syscon@1a400000 {
-			compatible = "qcom,tcsr-ipq8064", "syscon";
-			reg = <0x1a400000 0x100>;
-		};
-
-		l2cc: clock-controller@2011000 {
-			compatible = "qcom,kpss-gcc", "syscon";
-			reg = <0x2011000 0x1000>;
-			clocks = <&gcc PLL8_VOTE>, <&gcc PXO_SRC>;
-			clock-names = "pll8_vote", "pxo";
-			clock-output-names = "acpu_l2_aux";
-		};
-
-		lcc: clock-controller@28000000 {
-			compatible = "qcom,lcc-ipq8064";
-			reg = <0x28000000 0x1000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-		};
-
 		pcie0: pci@1b500000 {
 			compatible = "qcom,pcie-ipq8064";
 			reg = <0x1b500000 0x1000
@@ -808,7 +1085,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00100000   /* downstream I/O */
+			ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00010000   /* downstream I/O */
 				  0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */
 
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
@@ -842,7 +1119,7 @@
 			pinctrl-names = "default";
 
 			status = "disabled";
-			perst-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
+			perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
 		};
 
 		pcie1: pci@1b700000 {
@@ -859,7 +1136,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00100000   /* downstream I/O */
+			ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00010000   /* downstream I/O */
 				  0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */
 
 			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
@@ -893,7 +1170,7 @@
 			pinctrl-names = "default";
 
 			status = "disabled";
-			perst-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
+			perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
 		};
 
 		pcie2: pci@1b900000 {
@@ -910,7 +1187,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00100000   /* downstream I/O */
+			ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00010000   /* downstream I/O */
 				  0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */
 
 			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
@@ -944,12 +1221,7 @@
 			pinctrl-names = "default";
 
 			status = "disabled";
-			perst-gpio = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
-		};
-
-		nss_common: syscon@03000000 {
-			compatible = "syscon";
-			reg = <0x03000000 0x0000FFFF>;
+			perst-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
 		};
 
 		qsgmii_csr: syscon@1bb00000 {
@@ -957,22 +1229,60 @@
 			reg = <0x1bb00000 0x000001FF>;
 		};
 
-		stmmac_axi_setup: stmmac-axi-config {
-			snps,wr_osr_lmt = <7>;
-			snps,rd_osr_lmt = <7>;
-			snps,blen = <16 0 0 0 0 0 0>;
+		lcc: clock-controller@28000000 {
+			compatible = "qcom,lcc-ipq8064";
+			reg = <0x28000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		lpass@28100000 {
+			compatible = "qcom,lpass-cpu";
+			status = "disabled";
+			clocks = <&lcc AHBIX_CLK>,
+					<&lcc MI2S_OSR_CLK>,
+					<&lcc MI2S_BIT_CLK>;
+			clock-names = "ahbix-clk",
+					"mi2s-osr-clk",
+					"mi2s-bit-clk";
+			interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "lpass-irq-lpaif";
+			reg = <0x28100000 0x10000>;
+			reg-names = "lpass-lpaif";
+		};
+
+		sata: sata@29000000 {
+			compatible = "qcom,ipq806x-ahci", "generic-ahci";
+			reg = <0x29000000 0x180>;
+
+			interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc SFAB_SATA_S_H_CLK>,
+				 <&gcc SATA_H_CLK>,
+				 <&gcc SATA_A_CLK>,
+				 <&gcc SATA_RXOOB_CLK>,
+				 <&gcc SATA_PMALIVE_CLK>;
+			clock-names = "slave_face", "iface", "core",
+					"rxoob", "pmalive";
+
+			assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>;
+			assigned-clock-rates = <100000000>, <100000000>;
+
+			phys = <&sata_phy>;
+			phy-names = "sata-phy";
+			status = "disabled";
 		};
 
 		gmac0: ethernet@37000000 {
 			device_type = "network";
-			compatible = "qcom,ipq806x-gmac";
+			compatible = "qcom,ipq806x-gmac", "snps,dwmac";
 			reg = <0x37000000 0x200000>;
 			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "macirq";
 
 			snps,axi-config = <&stmmac_axi_setup>;
 			snps,pbl = <32>;
-			snps,aal = <1>;
+			snps,aal;
 
 			qcom,nss-common = <&nss_common>;
 			qcom,qsgmii-csr = <&qsgmii_csr>;
@@ -989,14 +1299,14 @@
 
 		gmac1: ethernet@37200000 {
 			device_type = "network";
-			compatible = "qcom,ipq806x-gmac";
+			compatible = "qcom,ipq806x-gmac", "snps,dwmac";
 			reg = <0x37200000 0x200000>;
 			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "macirq";
 
 			snps,axi-config = <&stmmac_axi_setup>;
 			snps,pbl = <32>;
-			snps,aal = <1>;
+			snps,aal;
 
 			qcom,nss-common = <&nss_common>;
 			qcom,qsgmii-csr = <&qsgmii_csr>;
@@ -1013,14 +1323,14 @@
 
 		gmac2: ethernet@37400000 {
 			device_type = "network";
-			compatible = "qcom,ipq806x-gmac";
+			compatible = "qcom,ipq806x-gmac", "snps,dwmac";
 			reg = <0x37400000 0x200000>;
 			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "macirq";
 
 			snps,axi-config = <&stmmac_axi_setup>;
 			snps,pbl = <32>;
-			snps,aal = <1>;
+			snps,aal;
 
 			qcom,nss-common = <&nss_common>;
 			qcom,qsgmii-csr = <&qsgmii_csr>;
@@ -1037,14 +1347,14 @@
 
 		gmac3: ethernet@37600000 {
 			device_type = "network";
-			compatible = "qcom,ipq806x-gmac";
+			compatible = "qcom,ipq806x-gmac", "snps,dwmac";
 			reg = <0x37600000 0x200000>;
 			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "macirq";
 
 			snps,axi-config = <&stmmac_axi_setup>;
 			snps,pbl = <32>;
-			snps,aal = <1>;
+			snps,aal;
 
 			qcom,nss-common = <&nss_common>;
 			qcom,qsgmii-csr = <&qsgmii_csr>;
@@ -1058,168 +1368,5 @@
 
 			status = "disabled";
 		};
-
-		hs_phy_0: phy@100f8800 {
-			compatible = "qcom,ipq806x-usb-phy-hs";
-			reg = <0x100f8800 0x30>;
-			clocks = <&gcc USB30_0_UTMI_CLK>;
-			clock-names = "ref";
-			#phy-cells = <0>;
-
-			status = "disabled";
-		};
-
-		ss_phy_0: phy@100f8830 {
-			compatible = "qcom,ipq806x-usb-phy-ss";
-			reg = <0x100f8830 0x30>;
-			clocks = <&gcc USB30_0_MASTER_CLK>;
-			clock-names = "ref";
-			#phy-cells = <0>;
-
-			status = "disabled";
-		};
-
-		usb3_0: usb3@100f8800 {
-			compatible = "qcom,ipq8064-dwc3", "qcom,dwc3";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x100f8800 0x8000>;
-			clocks = <&gcc USB30_0_MASTER_CLK>;
-			clock-names = "core";
-
-			ranges;
-
-			resets = <&gcc USB30_0_MASTER_RESET>;
-			reset-names = "master";
-
-			status = "disabled";
-
-			dwc3_0: dwc3@10000000 {
-				compatible = "snps,dwc3";
-				reg = <0x10000000 0xcd00>;
-				interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&hs_phy_0>, <&ss_phy_0>;
-				phy-names = "usb2-phy", "usb3-phy";
-				dr_mode = "host";
-				snps,dis_u3_susphy_quirk;
-			};
-		};
-
-		hs_phy_1: phy@110f8800 {
-			compatible = "qcom,ipq806x-usb-phy-hs";
-			reg = <0x110f8800 0x30>;
-			clocks = <&gcc USB30_1_UTMI_CLK>;
-			clock-names = "ref";
-			#phy-cells = <0>;
-		};
-
-		ss_phy_1: phy@110f8830 {
-			compatible = "qcom,ipq806x-usb-phy-ss";
-			reg = <0x110f8830 0x30>;
-			clocks = <&gcc USB30_1_MASTER_CLK>;
-			clock-names = "ref";
-			#phy-cells = <0>;
-		};
-
-		usb3_1: usb3@110f8800 {
-			compatible = "qcom,ipq8064-dwc3", "qcom,dwc3";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x110f8800 0x8000>;
-			clocks = <&gcc USB30_1_MASTER_CLK>;
-			clock-names = "core";
-
-			ranges;
-
-			resets = <&gcc USB30_1_MASTER_RESET>;
-			reset-names = "master";
-
-			status = "disabled";
-
-			dwc3_1: dwc3@11000000 {
-				compatible = "snps,dwc3";
-				reg = <0x11000000 0xcd00>;
-				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&hs_phy_1>, <&ss_phy_1>;
-				phy-names = "usb2-phy", "usb3-phy";
-				dr_mode = "host";
-				snps,dis_u3_susphy_quirk;
-			};
-		};
-
-		vsdcc_fixed: vsdcc-regulator {
-			compatible = "regulator-fixed";
-			regulator-name = "SDCC Power";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		sdcc1bam: dma@12402000 {
-			compatible = "qcom,bam-v1.3.0";
-			reg = <0x12402000 0x8000>;
-			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc SDC1_H_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-		};
-
-		sdcc3bam: dma@12182000 {
-			compatible = "qcom,bam-v1.3.0";
-			reg = <0x12182000 0x8000>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc SDC3_H_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-		};
-
-		amba: amba {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			sdcc1: mmc@12400000 {
-				status          = "disabled";
-				compatible      = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				reg             = <0x12400000 0x2000>;
-				interrupts      = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
-				clocks          = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
-				clock-names     = "mclk", "apb_pclk";
-				bus-width       = <8>;
-				max-frequency   = <96000000>;
-				non-removable;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				mmc-ddr-1_8v;
-				vmmc-supply = <&vsdcc_fixed>;
-				dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
-				dma-names = "tx", "rx";
-			};
-
-			sdcc3: mmc@12180000 {
-				compatible      = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				status          = "disabled";
-				reg             = <0x12180000 0x2000>;
-				interrupts      = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
-				clocks          = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
-				clock-names     = "mclk", "apb_pclk";
-				bus-width       = <8>;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				max-frequency   = <192000000>;
-				sd-uhs-sdr104;
-				sd-uhs-ddr50;
-				vqmmc-supply = <&vsdcc_fixed>;
-				dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
-				dma-names = "tx", "rx";
-			};
-		};
 	};
 };
diff --git a/arch/arm/boot/dts/qcom-ipq8065-smb208.dtsi b/arch/arm/boot/dts/qcom-ipq8065-smb208.dtsi
new file mode 100644
index 000000000000..803e6ff99ef8
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq8065-smb208.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "qcom-ipq8065.dtsi"
+
+&rpm {
+	smb208_regulators: regulators {
+		compatible = "qcom,rpm-smb208-regulators";
+
+		smb208_s1a: s1a {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1150000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s1b: s1b {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1150000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s2a: s2a {
+			regulator-min-microvolt = <775000>;
+			regulator-max-microvolt = <1275000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s2b: s2b {
+			regulator-min-microvolt = <775000>;
+			regulator-max-microvolt = <1275000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-ipq8065.dtsi b/arch/arm/boot/dts/qcom-ipq8065.dtsi
new file mode 100644
index 000000000000..ea49f6cc416d
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq8065.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "qcom-ipq8064-v2.0.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ8065";
+	compatible = "qcom,ipq8065", "qcom,ipq8064";
+};
diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
index 10ad929759ed..49de1821ac3a 100644
--- a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
@@ -114,7 +114,7 @@
 };
 
 &pmicgpio {
-	usb_vbus_5v_pins: usb_vbus_5v_pins {
+	usb_vbus_5v_pins: usb-vbus-5v-state {
 		pins = "gpio4";
 		function = "normal";
 		output-high;
diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi
index c32415f0e66d..b47c86412de2 100644
--- a/arch/arm/boot/dts/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi
@@ -139,6 +139,7 @@
 		gcc: clock-controller@900000 {
 			compatible = "qcom,gcc-mdm9615";
 			#clock-cells = <1>;
+			#power-domain-cells = <1>;
 			#reset-cells = <1>;
 			reg = <0x900000 0x4000>;
 		};
@@ -151,7 +152,7 @@
 		};
 
 		l2cc: clock-controller@2011000 {
-			compatible = "syscon";
+			compatible = "qcom,kpss-gcc", "syscon";
 			reg = <0x02011000 0x1000>;
 		};
 
@@ -320,6 +321,7 @@
 
 				pmicgpio: gpio@150 {
 					compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio";
+					reg = <0x150>;
 					interrupt-controller;
 					#interrupt-cells = <2>;
 					gpio-controller;
@@ -329,7 +331,7 @@
 			};
 		};
 
-		sdcc1bam: dma@12182000{
+		sdcc1bam: dma-controller@12182000{
 			compatible = "qcom,bam-v1.3.0";
 			reg = <0x12182000 0x8000>;
 			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
@@ -339,7 +341,7 @@
 			qcom,ee = <0>;
 		};
 
-		sdcc2bam: dma@12142000{
+		sdcc2bam: dma-controller@12142000{
 			compatible = "qcom,bam-v1.3.0";
 			reg = <0x12142000 0x8000>;
 			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
@@ -360,7 +362,7 @@
 				arm,primecell-periphid = <0x00051180>;
 				reg = <0x12180000 0x2000>;
 				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names	= "cmd_irq";
+				interrupt-names = "cmd_irq";
 				clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
 				clock-names = "mclk", "apb_pclk";
 				bus-width = <8>;
@@ -380,7 +382,7 @@
 				status = "disabled";
 				reg = <0x12140000 0x2000>;
 				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names	= "cmd_irq";
+				interrupt-names = "cmd_irq";
 				clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
 				clock-names = "mclk", "apb_pclk";
 				bus-width = <4>;
@@ -410,7 +412,7 @@
 			interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
 				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
 				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names	= "ack", "err", "wakeup";
+			interrupt-names = "ack", "err", "wakeup";
 
 			regulators {
 				compatible = "qcom,rpm-pm8018-regulators";
diff --git a/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts b/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts
index d159188c8b95..290e1df631f0 100644
--- a/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts
+++ b/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts
@@ -18,8 +18,6 @@
 	};
 };
 
-&soc {
-	serial@f991f000 {
-		status = "ok";
-	};
+&blsp1_uart3 {
+	status = "ok";
 };
diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi
index 7d48599502b3..cf2d56929428 100644
--- a/arch/arm/boot/dts/qcom-msm8226.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8226.dtsi
@@ -8,6 +8,8 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-msm8974.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/reset/qcom,gcc-msm8974.h>
 
 / {
 	#address-cells = <1>;
@@ -43,13 +45,6 @@
 		};
 	};
 
-	tcsr_mutex: hwlock {
-		compatible = "qcom,tcsr-mutex";
-		syscon = <&tcsr_mutex_block 0 0x80>;
-
-		#hwlock-cells = <1>;
-	};
-
 	reserved-memory {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -59,6 +54,11 @@
 			reg = <0x3000000 0x100000>;
 			no-map;
 		};
+
+		adsp_region: adsp@dc00000 {
+			reg = <0x0dc00000 0x1900000>;
+			no-map;
+		};
 	};
 
 	smd {
@@ -72,6 +72,35 @@
 			rpm_requests: rpm-requests {
 				compatible = "qcom,rpm-msm8226";
 				qcom,smd-channels = "rpm_requests";
+
+				rpmpd: power-controller {
+					compatible = "qcom,msm8226-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <1>;
+						};
+						rpmpd_opp_svs_krait: opp2 {
+							opp-level = <2>;
+						};
+						rpmpd_opp_svs_soc: opp3 {
+							opp-level = <3>;
+						};
+						rpmpd_opp_nom: opp4 {
+							opp-level = <4>;
+						};
+						rpmpd_opp_turbo: opp5 {
+							opp-level = <5>;
+						};
+						rpmpd_opp_super_turbo: opp6 {
+							opp-level = <6>;
+						};
+					};
+				};
 			};
 		};
 	};
@@ -85,6 +114,31 @@
 		hwlocks = <&tcsr_mutex 3>;
 	};
 
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+
+		qcom,ipc = <&apcs 8 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
 	soc: soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -104,45 +158,60 @@
 			reg = <0xf9011000 0x1000>;
 		};
 
-		sdhc_1: sdhci@f9824900 {
+		sdhc_1: mmc@f9824900 {
 			compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
-			reg-names = "hc_mem", "core_mem";
+			reg-names = "hc", "core";
 			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
-				 <&gcc GCC_SDCC1_AHB_CLK>,
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
 				 <&xo_board>;
-			clock-names = "core", "iface", "xo";
+			clock-names = "iface", "core", "xo";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdhc1_default_state>;
 			status = "disabled";
 		};
 
-		sdhc_2: sdhci@f98a4900 {
+		sdhc_2: mmc@f98a4900 {
 			compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
-			reg-names = "hc_mem", "core_mem";
+			reg-names = "hc", "core";
 			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
-				 <&gcc GCC_SDCC2_AHB_CLK>,
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
 				 <&xo_board>;
-			clock-names = "core", "iface", "xo";
+			clock-names = "iface", "core", "xo";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdhc2_default_state>;
 			status = "disabled";
 		};
 
-		sdhc_3: sdhci@f9864900 {
+		sdhc_3: mmc@f9864900 {
 			compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
-			reg-names = "hc_mem", "core_mem";
+			reg-names = "hc", "core";
 			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC3_APPS_CLK>,
-				 <&gcc GCC_SDCC3_AHB_CLK>,
+			clocks = <&gcc GCC_SDCC3_AHB_CLK>,
+				 <&gcc GCC_SDCC3_APPS_CLK>,
 				 <&xo_board>;
-			clock-names = "core", "iface", "xo";
+			clock-names = "iface", "core", "xo";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdhc3_default_state>;
+			status = "disabled";
+		};
+
+		blsp1_uart1: serial@f991d000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf991d000 0x1000>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
 			status = "disabled";
 		};
 
@@ -229,6 +298,44 @@
 			#size-cells = <0>;
 		};
 
+		usb: usb@f9a55000 {
+			compatible = "qcom,ci-hdrc";
+			reg = <0xf9a55000 0x200>,
+			      <0xf9a55200 0x200>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_USB_HS_AHB_CLK>,
+				 <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			clock-names = "iface", "core";
+			assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			assigned-clock-rates = <75000000>;
+			resets = <&gcc GCC_USB_HS_BCR>;
+			reset-names = "core";
+			phy_type = "ulpi";
+			dr_mode = "otg";
+			hnp-disable;
+			srp-disable;
+			adp-disable;
+			ahb-burst-config = <0>;
+			phy-names = "usb-phy";
+			phys = <&usb_hs_phy>;
+			status = "disabled";
+			#reset-cells = <1>;
+
+			ulpi {
+				usb_hs_phy: phy {
+					compatible = "qcom,usb-hs-phy-msm8226",
+						     "qcom,usb-hs-phy";
+					#phy-cells = <0>;
+					clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+					clock-names = "ref", "sleep";
+					resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
+					reset-names = "phy", "por";
+					qcom,init-seq = /bits/ 8 <0x0 0x44
+						0x1 0x68 0x2 0x24 0x3 0x13>;
+				};
+			};
+		};
+
 		gcc: clock-controller@fc400000 {
 			compatible = "qcom,gcc-msm8226";
 			reg = <0xfc400000 0x4000>;
@@ -281,6 +388,57 @@
 				drive-strength = <2>;
 				bias-disable;
 			};
+
+			sdhc1_default_state: sdhc1-default-state {
+				clk {
+					pins = "sdc1_clk";
+					drive-strength = <10>;
+					bias-disable;
+				};
+
+				cmd-data {
+					pins = "sdc1_cmd", "sdc1_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+
+			sdhc2_default_state: sdhc2-default-state {
+				clk {
+					pins = "sdc2_clk";
+					drive-strength = <10>;
+					bias-disable;
+				};
+
+				cmd-data {
+					pins = "sdc2_cmd", "sdc2_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+
+			sdhc3_default_state: sdhc3-default-state {
+				clk {
+					pins = "gpio44";
+					function = "sdc3";
+					drive-strength = <8>;
+					bias-disable;
+				};
+
+				cmd {
+					pins = "gpio43";
+					function = "sdc3";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+
+				data {
+					pins = "gpio39", "gpio40", "gpio41", "gpio42";
+					function = "sdc3";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+			};
 		};
 
 		restart@fc4ab000 {
@@ -374,9 +532,44 @@
 			reg = <0xfc428000 0x4000>;
 		};
 
-		tcsr_mutex_block: syscon@fd484000 {
-			compatible = "syscon";
-			reg = <0xfd484000 0x2000>;
+		tcsr_mutex: hwlock@fd484000 {
+			compatible = "qcom,msm8226-tcsr-mutex", "qcom,tcsr-mutex";
+			reg = <0xfd484000 0x1000>;
+			#hwlock-cells = <1>;
+		};
+
+		adsp: remoteproc@fe200000 {
+			compatible = "qcom,msm8226-adsp-pil";
+			reg = <0xfe200000 0x100>;
+
+			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+			power-domains = <&rpmpd MSM8226_VDDCX>;
+			power-domain-names = "cx";
+
+			clocks = <&xo_board>;
+			clock-names = "xo";
+
+			memory-region = <&adsp_region>;
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			smd-edge {
+				interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,ipc = <&apcs 8 8>;
+				qcom,smd-edge = <1>;
+
+				label = "lpass";
+			};
 		};
 	};
 
diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts
index 414280d9bdba..be18f1be29a1 100644
--- a/arch/arm/boot/dts/qcom-msm8660-surf.dts
+++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts
@@ -15,38 +15,23 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	soc {
-		gsbi@19c00000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-			serial@19c40000 {
-				status = "okay";
-			};
-		};
-
-		/* Temporary fixed regulator */
-		vsdcc_fixed: vsdcc-regulator {
-			compatible = "regulator-fixed";
-			regulator-name = "SDCC Power";
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-			regulator-always-on;
-		};
+	/* Temporary fixed regulator */
+	vsdcc_fixed: vsdcc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "SDCC Power";
+		regulator-min-microvolt = <2700000>;
+		regulator-max-microvolt = <2700000>;
+		regulator-always-on;
+	};
+};
 
-		amba {
-			/* eMMC */
-			sdcc1: mmc@12400000 {
-				status = "okay";
-				vmmc-supply = <&vsdcc_fixed>;
-			};
+&gsbi12 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+};
 
-			/* External micro SD card */
-			sdcc3: mmc@12180000 {
-				status = "okay";
-				vmmc-supply = <&vsdcc_fixed>;
-			};
-		};
-	};
+&gsbi12_serial {
+	status = "okay";
 };
 
 &pm8058 {
@@ -76,3 +61,15 @@
 		keypad,num-columns = <5>;
 	};
 };
+
+/* eMMC */
+&sdcc1 {
+	vmmc-supply = <&vsdcc_fixed>;
+	status = "okay";
+};
+
+/* External micro SD card */
+&sdcc3 {
+	vmmc-supply = <&vsdcc_fixed>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
index 1e8aab357f9c..ddce7d64ba99 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -50,22 +50,25 @@
 	};
 
 	clocks {
-		cxo_board {
+		cxo_board: cxo-board-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <19200000>;
+			clock-output-names = "cxo_board";
 		};
 
-		pxo_board {
+		pxo_board: pxo-board-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <27000000>;
+			clock-output-names = "pxo_board";
 		};
 
-		sleep_clk {
+		sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
+			clock-output-names = "sleep_clk";
 		};
 	};
 
@@ -126,8 +129,62 @@
 		gcc: clock-controller@900000 {
 			compatible = "qcom,gcc-msm8660";
 			#clock-cells = <1>;
+			#power-domain-cells = <1>;
 			#reset-cells = <1>;
 			reg = <0x900000 0x4000>;
+			clocks = <&pxo_board>, <&cxo_board>;
+			clock-names = "pxo", "cxo";
+		};
+
+		gsbi1: gsbi@16000000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <12>;
+			reg = <0x16000000 0x100>;
+			clocks = <&gcc GSBI1_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon-tcsr = <&tcsr>;
+
+			status = "disabled";
+
+			gsbi1_spi: spi@16080000 {
+				compatible = "qcom,spi-qup-v1.1.1";
+				reg = <0x16080000 0x1000>;
+				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
+				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		gsbi3: gsbi@16200000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <12>;
+			reg = <0x16200000 0x100>;
+			clocks = <&gcc GSBI3_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon-tcsr = <&tcsr>;
+			status = "disabled";
+
+			gsbi3_i2c: i2c@16280000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x16280000 0x1000>;
+				interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI3_QUP_CLK>, <&gcc GSBI3_H_CLK>;
+				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
 		};
 
 		gsbi6: gsbi@16500000 {
@@ -211,6 +268,7 @@
 			ranges;
 
 			syscon-tcsr = <&tcsr>;
+			status = "disabled";
 
 			gsbi8_i2c: i2c@19880000 {
 				compatible = "qcom,i2c-qup-v1.1.1";
@@ -390,25 +448,27 @@
 		};
 
 		l2cc: clock-controller@2082000 {
-			compatible	= "syscon";
-			reg		= <0x02082000 0x1000>;
+			compatible = "qcom,kpss-gcc", "syscon";
+			reg = <0x02082000 0x1000>;
 		};
 
 		rpm: rpm@104000 {
-			compatible	= "qcom,rpm-msm8660";
-			reg		= <0x00104000 0x1000>;
-			qcom,ipc	= <&l2cc 0x8 2>;
-
-			interrupts	= <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
-					  <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
-					  <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names	= "ack", "err", "wakeup";
+			compatible = "qcom,rpm-msm8660";
+			reg = <0x00104000 0x1000>;
+			qcom,ipc = <&l2cc 0x8 2>;
+
+			interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ack", "err", "wakeup";
 			clocks = <&gcc RPM_MSG_RAM_H_CLK>;
 			clock-names = "ram";
 
 			rpmcc: clock-controller {
-				compatible	= "qcom,rpmcc-msm8660", "qcom,rpmcc";
+				compatible = "qcom,rpmcc-msm8660", "qcom,rpmcc";
 				#clock-cells = <1>;
+				clocks = <&pxo_board>;
+				clock-names = "pxo";
 			};
 
 			pm8901-regulators {
@@ -484,80 +544,80 @@
 			#size-cells = <1>;
 			ranges;
 			sdcc1: mmc@12400000 {
-				status		= "disabled";
-				compatible	= "arm,pl18x", "arm,primecell";
+				status = "disabled";
+				compatible = "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
-				reg		= <0x12400000 0x8000>;
-				interrupts	= <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names	= "cmd_irq";
-				clocks		= <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
-				clock-names	= "mclk", "apb_pclk";
-				bus-width	= <8>;
-				max-frequency	= <48000000>;
+				reg = <0x12400000 0x8000>;
+				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "cmd_irq";
+				clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+				clock-names = "mclk", "apb_pclk";
+				bus-width = <8>;
+				max-frequency = <48000000>;
 				non-removable;
 				cap-sd-highspeed;
 				cap-mmc-highspeed;
 			};
 
 			sdcc2: mmc@12140000 {
-				status		= "disabled";
-				compatible	= "arm,pl18x", "arm,primecell";
+				status = "disabled";
+				compatible = "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
-				reg		= <0x12140000 0x8000>;
-				interrupts	= <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names	= "cmd_irq";
-				clocks		= <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
-				clock-names	= "mclk", "apb_pclk";
-				bus-width	= <8>;
-				max-frequency	= <48000000>;
+				reg = <0x12140000 0x8000>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "cmd_irq";
+				clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
+				clock-names = "mclk", "apb_pclk";
+				bus-width = <8>;
+				max-frequency = <48000000>;
 				cap-sd-highspeed;
 				cap-mmc-highspeed;
 			};
 
 			sdcc3: mmc@12180000 {
-				compatible	= "arm,pl18x", "arm,primecell";
+				compatible = "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
-				status		= "disabled";
-				reg		= <0x12180000 0x8000>;
-				interrupts	= <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names	= "cmd_irq";
-				clocks		= <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
-				clock-names	= "mclk", "apb_pclk";
-				bus-width	= <4>;
+				status = "disabled";
+				reg = <0x12180000 0x8000>;
+				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "cmd_irq";
+				clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+				clock-names = "mclk", "apb_pclk";
+				bus-width = <4>;
 				cap-sd-highspeed;
 				cap-mmc-highspeed;
-				max-frequency	= <48000000>;
+				max-frequency = <48000000>;
 				no-1-8-v;
 			};
 
 			sdcc4: mmc@121c0000 {
-				compatible	= "arm,pl18x", "arm,primecell";
+				compatible = "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
-				status		= "disabled";
-				reg		= <0x121c0000 0x8000>;
-				interrupts	= <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names	= "cmd_irq";
-				clocks		= <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
-				clock-names	= "mclk", "apb_pclk";
-				bus-width	= <4>;
-				max-frequency	= <48000000>;
+				status = "disabled";
+				reg = <0x121c0000 0x8000>;
+				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "cmd_irq";
+				clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
+				clock-names = "mclk", "apb_pclk";
+				bus-width = <4>;
+				max-frequency = <48000000>;
 				cap-sd-highspeed;
 				cap-mmc-highspeed;
 			};
 
 			sdcc5: mmc@12200000 {
-				compatible	= "arm,pl18x", "arm,primecell";
+				compatible = "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
-				status		= "disabled";
-				reg		= <0x12200000 0x8000>;
-				interrupts	= <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names	= "cmd_irq";
-				clocks		= <&gcc SDC5_CLK>, <&gcc SDC5_H_CLK>;
-				clock-names	= "mclk", "apb_pclk";
-				bus-width	= <4>;
+				status = "disabled";
+				reg = <0x12200000 0x8000>;
+				interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "cmd_irq";
+				clocks = <&gcc SDC5_CLK>, <&gcc SDC5_H_CLK>;
+				clock-names = "mclk", "apb_pclk";
+				bus-width = <4>;
 				cap-sd-highspeed;
 				cap-mmc-highspeed;
-				max-frequency	= <48000000>;
+				max-frequency = <48000000>;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/qcom-msm8916-samsung-e5.dts b/arch/arm/boot/dts/qcom-msm8916-samsung-e5.dts
new file mode 100644
index 000000000000..c8d34de8a71e
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8916-samsung-e5.dts
@@ -0,0 +1,3 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "arm64/qcom/msm8916-samsung-e5.dts"
+#include "qcom-msm8916-smp.dtsi"
diff --git a/arch/arm/boot/dts/qcom-msm8916-samsung-e7.dts b/arch/arm/boot/dts/qcom-msm8916-samsung-e7.dts
new file mode 100644
index 000000000000..85be286c8608
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8916-samsung-e7.dts
@@ -0,0 +1,3 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "arm64/qcom/msm8916-samsung-e7.dts"
+#include "qcom-msm8916-smp.dtsi"
diff --git a/arch/arm/boot/dts/qcom-msm8916-samsung-grandmax.dts b/arch/arm/boot/dts/qcom-msm8916-samsung-grandmax.dts
new file mode 100644
index 000000000000..d3abe0536238
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8916-samsung-grandmax.dts
@@ -0,0 +1,3 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "arm64/qcom/msm8916-samsung-grandmax.dts"
+#include "qcom-msm8916-smp.dtsi"
diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
index 4af01039c3b2..9157e3c4f48f 100644
--- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
@@ -15,318 +15,6 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	soc {
-		gsbi@16400000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-			serial@16440000 {
-				status = "okay";
-			};
-		};
-
-		amba {
-			/* eMMC */
-			sdcc1: mmc@12400000 {
-				status = "okay";
-			};
-
-			/* External micro SD card */
-			sdcc3: mmc@12180000 {
-				status = "okay";
-			};
-		};
-
-		rpm@108000 {
-			regulators {
-				compatible = "qcom,rpm-pm8921-regulators";
-				vin_lvs1_3_6-supply = <&pm8921_s4>;
-				vin_lvs2-supply = <&pm8921_s4>;
-				vin_lvs4_5_7-supply = <&pm8921_s4>;
-				vdd_ncp-supply = <&pm8921_l6>;
-				vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
-				vdd_l21_l23_l29-supply = <&pm8921_s8>;
-				vdd_l24-supply = <&pm8921_s1>;
-				vdd_l25-supply = <&pm8921_s1>;
-				vdd_l27-supply = <&pm8921_s7>;
-				vdd_l28-supply = <&pm8921_s7>;
-
-				/* Buck SMPS */
-				pm8921_s1: s1 {
-					regulator-always-on;
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1225000>;
-					qcom,switch-mode-frequency = <3200000>;
-					bias-pull-down;
-				};
-
-				pm8921_s2: s2 {
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				pm8921_s3: s3 {
-					regulator-min-microvolt = <500000>;
-					regulator-max-microvolt = <1150000>;
-					qcom,switch-mode-frequency = <4800000>;
-					bias-pull-down;
-				};
-
-				pm8921_s4: s4 {
-					regulator-always-on;
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-					qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
-				};
-
-				pm8921_s7: s7 {
-					regulator-min-microvolt = <1150000>;
-					regulator-max-microvolt = <1150000>;
-					qcom,switch-mode-frequency = <3200000>;
-					bias-pull-down;
-				};
-
-				pm8921_s8: s8 {
-					regulator-always-on;
-					regulator-min-microvolt = <2050000>;
-					regulator-max-microvolt = <2050000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				/* PMOS LDO */
-				pm8921_l1: l1 {
-					regulator-always-on;
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					bias-pull-down;
-				};
-
-				pm8921_l2: l2 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-
-				pm8921_l3: l3 {
-					regulator-min-microvolt = <3075000>;
-					regulator-max-microvolt = <3075000>;
-					bias-pull-down;
-				};
-
-				pm8921_l4: l4 {
-					regulator-always-on;
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				pm8921_l5: l5 {
-					regulator-min-microvolt = <2950000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				pm8921_l6: l6 {
-					regulator-min-microvolt = <2950000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				pm8921_l7: l7 {
-					regulator-always-on;
-					regulator-min-microvolt = <1850000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				pm8921_l8: l8 {
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <3000000>;
-					bias-pull-down;
-				};
-
-				pm8921_l9: l9 {
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					bias-pull-down;
-				};
-
-				pm8921_l10: l10 {
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					bias-pull-down;
-				};
-
-				pm8921_l11: l11 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-
-				pm8921_l12: l12 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-
-				pm8921_l14: l14 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				pm8921_l15: l15 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				pm8921_l16: l16 {
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					bias-pull-down;
-				};
-
-				pm8921_l17: l17 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				pm8921_l18: l18 {
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-					bias-pull-down;
-				};
-
-				pm8921_l21: l21 {
-					regulator-min-microvolt = <1900000>;
-					regulator-max-microvolt = <1900000>;
-					bias-pull-down;
-				};
-
-				pm8921_l22: l22 {
-					regulator-min-microvolt = <2750000>;
-					regulator-max-microvolt = <2750000>;
-					bias-pull-down;
-				};
-
-				pm8921_l23: l23 {
-					regulator-always-on;
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				pm8921_l24: l24 {
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt = <1150000>;
-					bias-pull-down;
-				};
-
-				pm8921_l25: l25 {
-					regulator-always-on;
-					regulator-min-microvolt = <1250000>;
-					regulator-max-microvolt = <1250000>;
-					bias-pull-down;
-				};
-
-				/* Low Voltage Switch */
-				pm8921_lvs1: lvs1 {
-					bias-pull-down;
-				};
-
-				pm8921_lvs2: lvs2 {
-					bias-pull-down;
-				};
-
-				pm8921_lvs3: lvs3 {
-					bias-pull-down;
-				};
-
-				pm8921_lvs4: lvs4 {
-					bias-pull-down;
-				};
-
-				pm8921_lvs5: lvs5 {
-					bias-pull-down;
-				};
-
-				pm8921_lvs6: lvs6 {
-					bias-pull-down;
-				};
-
-				pm8921_lvs7: lvs7 {
-					bias-pull-down;
-				};
-
-				pm8921_ncp: ncp {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,switch-mode-frequency = <1600000>;
-				};
-			};
-		};
-
-		gsbi@16000000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_SPI>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi1_default>;
-			spi@16080000 {
-				status = "okay";
-				eth@0 {
-					compatible = "micrel,ks8851";
-					reg = <0>;
-					interrupt-parent = <&msmgpio>;
-					interrupts = <90 8>;
-					spi-max-frequency = <5400000>;
-					vdd-supply = <&ext_l2>;
-					vdd-io-supply = <&pm8921_lvs6>;
-					reset-gpios = <&msmgpio 89 0>;
-				};
-			};
-		};
-
-		pinctrl@800000 {
-			spi1_default: spi1_default {
-				mux {
-					pins = "gpio6", "gpio7", "gpio9";
-					function = "gsbi1";
-				};
-
-				mosi {
-					pins = "gpio6";
-					drive-strength = <12>;
-					bias-disable;
-				};
-
-				miso {
-					pins = "gpio7";
-					drive-strength = <12>;
-					bias-disable;
-				};
-
-				cs {
-					pins = "gpio8";
-					drive-strength = <12>;
-					bias-disable;
-					output-low;
-				};
-
-				clk {
-					pins = "gpio9";
-					drive-strength = <12>;
-					bias-disable;
-				};
-			};
-		};
-	};
-
 	regulators {
 		compatible = "simple-bus";
 
@@ -340,6 +28,71 @@
 	};
 };
 
+&gsbi1 {
+	qcom,mode = <GSBI_PROT_SPI>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_default>;
+	status = "okay";
+};
+
+&gsbi1_spi {
+	status = "okay";
+
+	ethernet@0 {
+		compatible = "micrel,ks8851";
+		reg = <0>;
+		interrupt-parent = <&msmgpio>;
+		interrupts = <90 8>;
+		spi-max-frequency = <5400000>;
+		vdd-supply = <&ext_l2>;
+		vdd-io-supply = <&pm8921_lvs6>;
+		reset-gpios = <&msmgpio 89 0>;
+	};
+};
+
+&gsbi5 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+};
+
+&gsbi5_serial {
+	status = "okay";
+};
+
+&msmgpio {
+	spi1_default: spi1_default {
+		 mux {
+			pins = "gpio6", "gpio7", "gpio9";
+			function = "gsbi1";
+		 };
+
+		 mosi {
+			pins = "gpio6";
+			drive-strength = <12>;
+			bias-disable;
+		 };
+
+		 miso {
+			pins = "gpio7";
+			drive-strength = <12>;
+			bias-disable;
+		 };
+
+		 cs {
+			pins = "gpio8";
+			drive-strength = <12>;
+			bias-disable;
+			output-low;
+		 };
+
+		 clk {
+			pins = "gpio9";
+			drive-strength = <12>;
+			bias-disable;
+		 };
+	};
+};
+
 &pmicintc {
 	keypad@148 {
 		linux,keymap = <
@@ -352,3 +105,249 @@
 		keypad,num-columns = <5>;
 	};
 };
+
+&rpm {
+	regulators {
+		compatible = "qcom,rpm-pm8921-regulators";
+		vin_lvs1_3_6-supply = <&pm8921_s4>;
+		vin_lvs2-supply = <&pm8921_s4>;
+		vin_lvs4_5_7-supply = <&pm8921_s4>;
+		vdd_ncp-supply = <&pm8921_l6>;
+		vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+		vdd_l21_l23_l29-supply = <&pm8921_s8>;
+		vdd_l24-supply = <&pm8921_s1>;
+		vdd_l25-supply = <&pm8921_s1>;
+		vdd_l27-supply = <&pm8921_s7>;
+		vdd_l28-supply = <&pm8921_s7>;
+
+		/* Buck SMPS */
+		pm8921_s1: s1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			qcom,switch-mode-frequency = <3200000>;
+			bias-pull-down;
+		};
+
+		pm8921_s2: s2 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		pm8921_s3: s3 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1150000>;
+			qcom,switch-mode-frequency = <4800000>;
+			bias-pull-down;
+		};
+
+		pm8921_s4: s4 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+			qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+		};
+
+		pm8921_s7: s7 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+			qcom,switch-mode-frequency = <3200000>;
+			bias-pull-down;
+		};
+
+		pm8921_s8: s8 {
+			regulator-always-on;
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		/* PMOS LDO */
+		pm8921_l1: l1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			bias-pull-down;
+		};
+
+		pm8921_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		pm8921_l3: l3 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+			bias-pull-down;
+		};
+
+		pm8921_l4: l4 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8921_l5: l5 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l6: l6 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l7: l7 {
+			regulator-always-on;
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l8: l8 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		pm8921_l9: l9 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		pm8921_l10: l10 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		pm8921_l11: l11 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+
+		pm8921_l12: l12 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		pm8921_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8921_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l16: l16 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			bias-pull-down;
+		};
+
+		pm8921_l17: l17 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l18: l18 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			bias-pull-down;
+		};
+
+		pm8921_l21: l21 {
+			regulator-min-microvolt = <1900000>;
+			regulator-max-microvolt = <1900000>;
+			bias-pull-down;
+		};
+
+		pm8921_l22: l22 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+			bias-pull-down;
+		};
+
+		pm8921_l23: l23 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8921_l24: l24 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1150000>;
+			bias-pull-down;
+		};
+
+		pm8921_l25: l25 {
+			regulator-always-on;
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+			bias-pull-down;
+		};
+
+		/* Low Voltage Switch */
+		pm8921_lvs1: lvs1 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs2: lvs2 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs3: lvs3 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs4: lvs4 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs5: lvs5 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs6: lvs6 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs7: lvs7 {
+			bias-pull-down;
+		};
+
+		pm8921_ncp: ncp {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+		};
+	};
+};
+
+/* eMMC */
+&sdcc1 {
+	status = "okay";
+};
+
+/* External micro SD card */
+&sdcc3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
index 2a0ec97a264f..c5740da3754c 100644
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -3,6 +3,7 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-msm8960.h>
+#include <dt-bindings/clock/qcom,lcc-msm8960.h>
 #include <dt-bindings/mfd/qcom-rpm.h>
 #include <dt-bindings/soc/qcom,gsbi.h>
 
@@ -56,14 +57,14 @@
 	};
 
 	clocks {
-		cxo_board {
+		cxo_board: cxo_board {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <19200000>;
 			clock-output-names = "cxo_board";
 		};
 
-		pxo_board {
+		pxo_board: pxo_board {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <27000000>;
@@ -78,6 +79,15 @@
 		};
 	};
 
+	/* Temporary fixed regulator */
+	vsdcc_fixed: vsdcc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "SDCC Power";
+		regulator-min-microvolt = <2700000>;
+		regulator-max-microvolt = <2700000>;
+		regulator-always-on;
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -118,8 +128,13 @@
 		gcc: clock-controller@900000 {
 			compatible = "qcom,gcc-msm8960";
 			#clock-cells = <1>;
+			#power-domain-cells = <1>;
 			#reset-cells = <1>;
 			reg = <0x900000 0x4000>;
+			clocks = <&cxo_board>,
+				 <&pxo_board>,
+				 <&lcc PLL4>;
+			clock-names = "cxo", "pxo", "pll4";
 		};
 
 		lcc: clock-controller@28000000 {
@@ -127,27 +142,60 @@
 			reg = <0x28000000 0x1000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
+			clocks = <&pxo_board>,
+				 <&gcc PLL4_VOTE>,
+				 <0>,
+				 <0>, <0>,
+				 <0>, <0>,
+				 <0>;
+			clock-names = "pxo",
+				      "pll4_vote",
+				      "mi2s_codec_clk",
+				      "codec_i2s_mic_codec_clk",
+				      "spare_i2s_mic_codec_clk",
+				      "codec_i2s_spkr_codec_clk",
+				      "spare_i2s_spkr_codec_clk",
+				      "pcm_codec_clk";
 		};
 
 		clock-controller@4000000 {
 			compatible = "qcom,mmcc-msm8960";
 			reg = <0x4000000 0x1000>;
 			#clock-cells = <1>;
+			#power-domain-cells = <1>;
 			#reset-cells = <1>;
+			clocks = <&pxo_board>,
+				 <&gcc PLL3>,
+				 <&gcc PLL8_VOTE>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			clock-names = "pxo",
+				      "pll3",
+				      "pll8_vote",
+				      "dsi1pll",
+				      "dsi1pllbyte",
+				      "dsi2pll",
+				      "dsi2pllbyte",
+				      "hdmipll";
 		};
 
 		l2cc: clock-controller@2011000 {
-			compatible	= "syscon";
-			reg		= <0x2011000 0x1000>;
+			compatible = "qcom,kpss-gcc", "syscon";
+			reg = <0x2011000 0x1000>;
 		};
 
-		rpm@108000 {
-			compatible	= "qcom,rpm-msm8960";
-			reg		= <0x108000 0x1000>;
-			qcom,ipc	= <&l2cc 0x8 2>;
+		rpm: rpm@108000 {
+			compatible = "qcom,rpm-msm8960";
+			reg = <0x108000 0x1000>;
+			qcom,ipc = <&l2cc 0x8 2>;
 
-			interrupts	= <0 19 0>, <0 21 0>, <0 22 0>;
-			interrupt-names	= "ack", "err", "wakeup";
+			interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ack", "err", "wakeup";
 
 			regulators {
 				compatible = "qcom,rpm-pm8921-regulators";
@@ -192,7 +240,7 @@
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x16440000 0x1000>,
 				      <0x16400000 0x1000>;
-				interrupts = <0 154 0x0>;
+				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
 				clock-names = "core", "iface";
 				status = "disabled";
@@ -249,31 +297,22 @@
 			clock-names = "core";
 		};
 
-		/* Temporary fixed regulator */
-		vsdcc_fixed: vsdcc-regulator {
-			compatible = "regulator-fixed";
-			regulator-name = "SDCC Power";
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-			regulator-always-on;
-		};
-
 		amba {
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
 			sdcc1: mmc@12400000 {
-				status		= "disabled";
-				compatible	= "arm,pl18x", "arm,primecell";
+				status = "disabled";
+				compatible = "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
-				reg		= <0x12400000 0x8000>;
-				interrupts	= <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names	= "cmd_irq";
-				clocks		= <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
-				clock-names	= "mclk", "apb_pclk";
-				bus-width	= <8>;
-				max-frequency	= <96000000>;
+				reg = <0x12400000 0x8000>;
+				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "cmd_irq";
+				clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+				clock-names = "mclk", "apb_pclk";
+				bus-width = <8>;
+				max-frequency = <96000000>;
 				non-removable;
 				cap-sd-highspeed;
 				cap-mmc-highspeed;
@@ -281,18 +320,18 @@
 			};
 
 			sdcc3: mmc@12180000 {
-				compatible	= "arm,pl18x", "arm,primecell";
+				compatible = "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
-				status		= "disabled";
-				reg		= <0x12180000 0x8000>;
-				interrupts	= <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names	= "cmd_irq";
-				clocks		= <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
-				clock-names	= "mclk", "apb_pclk";
-				bus-width	= <4>;
+				status = "disabled";
+				reg = <0x12180000 0x8000>;
+				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "cmd_irq";
+				clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+				clock-names = "mclk", "apb_pclk";
+				bus-width = <4>;
 				cap-sd-highspeed;
 				cap-mmc-highspeed;
-				max-frequency	= <192000000>;
+				max-frequency = <192000000>;
 				no-1-8-v;
 				vmmc-supply = <&vsdcc_fixed>;
 			};
@@ -303,7 +342,7 @@
 			reg = <0x1a400000 0x100>;
 		};
 
-		gsbi@16000000 {
+		gsbi1: gsbi@16000000 {
 			compatible = "qcom,gsbi-v1.0.0";
 			cell-index = <1>;
 			reg = <0x16000000 0x100>;
@@ -313,12 +352,12 @@
 			#size-cells = <1>;
 			ranges;
 
-			spi@16080000 {
+			gsbi1_spi: spi@16080000 {
 				compatible = "qcom,spi-qup-v1.1.1";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x16080000 0x1000>;
-				interrupts = <0 147 0>;
+				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
 				spi-max-frequency = <24000000>;
 				cs-gpios = <&msmgpio 8 0>;
 
diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
deleted file mode 100644
index 6d77e0f8ca4d..000000000000
--- a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
+++ /dev/null
@@ -1,409 +0,0 @@
-#include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-
-
-/ {
-	model = "Fairphone 2";
-	compatible = "fairphone,fp2", "qcom,msm8974";
-
-	aliases {
-		serial0 = &blsp1_uart2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys_pin_a>;
-
-		camera-snapshot {
-			label = "camera_snapshot";
-			gpios = <&pm8941_gpios 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_CAMERA>;
-			wakeup-source;
-			debounce-interval = <15>;
-		};
-
-		volume-down {
-			label = "volume_down";
-			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			wakeup-source;
-			debounce-interval = <15>;
-		};
-
-		volume-up {
-			label = "volume_up";
-			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-			wakeup-source;
-			debounce-interval = <15>;
-		};
-	};
-
-	vibrator {
-		compatible = "gpio-vibrator";
-		enable-gpios = <&msmgpio 86 GPIO_ACTIVE_HIGH>;
-		vcc-supply = <&pm8941_l18>;
-	};
-
-	smd {
-		rpm {
-			rpm_requests {
-				pm8841-regulators {
-					s1 {
-						regulator-min-microvolt = <675000>;
-						regulator-max-microvolt = <1050000>;
-					};
-
-					s2 {
-						regulator-min-microvolt = <500000>;
-						regulator-max-microvolt = <1050000>;
-					};
-
-					s3 {
-						regulator-min-microvolt = <1050000>;
-						regulator-max-microvolt = <1050000>;
-					};
-				};
-
-				pm8941-regulators {
-					vdd_l1_l3-supply = <&pm8941_s1>;
-					vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
-					vdd_l4_l11-supply = <&pm8941_s1>;
-					vdd_l5_l7-supply = <&pm8941_s2>;
-					vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
-					vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
-					vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
-					vdd_l21-supply = <&vreg_boost>;
-
-					s1 {
-						regulator-min-microvolt = <1300000>;
-						regulator-max-microvolt = <1300000>;
-
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					s2 {
-						regulator-min-microvolt = <2150000>;
-						regulator-max-microvolt = <2150000>;
-
-						regulator-boot-on;
-					};
-
-					s3 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					l1 {
-						regulator-min-microvolt = <1225000>;
-						regulator-max-microvolt = <1225000>;
-
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					l2 {
-						regulator-min-microvolt = <1200000>;
-						regulator-max-microvolt = <1200000>;
-					};
-
-					l3 {
-						regulator-min-microvolt = <1225000>;
-						regulator-max-microvolt = <1225000>;
-					};
-
-					l4 {
-						regulator-min-microvolt = <1225000>;
-						regulator-max-microvolt = <1225000>;
-					};
-
-					l5 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					l6 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-
-						regulator-boot-on;
-					};
-
-					l7 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-
-						regulator-boot-on;
-					};
-
-					l8 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					l9 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <2950000>;
-					};
-
-					l10 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <2950000>;
-					};
-
-					l11 {
-						regulator-min-microvolt = <1225000>;
-						regulator-max-microvolt = <1350000>;
-					};
-
-					l12 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					l13 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <2950000>;
-
-						regulator-boot-on;
-					};
-
-					l14 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					l15 {
-						regulator-min-microvolt = <2050000>;
-						regulator-max-microvolt = <2050000>;
-					};
-
-					l16 {
-						regulator-min-microvolt = <2700000>;
-						regulator-max-microvolt = <2700000>;
-					};
-
-					l17 {
-						regulator-min-microvolt = <2850000>;
-						regulator-max-microvolt = <2850000>;
-					};
-
-					l18 {
-						regulator-min-microvolt = <2850000>;
-						regulator-max-microvolt = <2850000>;
-					};
-
-					l19 {
-						regulator-min-microvolt = <2900000>;
-						regulator-max-microvolt = <3350000>;
-					};
-
-					l20 {
-						regulator-min-microvolt = <2950000>;
-						regulator-max-microvolt = <2950000>;
-
-						regulator-boot-on;
-						regulator-system-load = <200000>;
-						regulator-allow-set-load;
-					};
-
-					l21 {
-						regulator-min-microvolt = <2950000>;
-						regulator-max-microvolt = <2950000>;
-
-						regulator-boot-on;
-					};
-
-					l22 {
-						regulator-min-microvolt = <3000000>;
-						regulator-max-microvolt = <3300000>;
-					};
-
-					l23 {
-						regulator-min-microvolt = <3000000>;
-						regulator-max-microvolt = <3000000>;
-					};
-
-					l24 {
-						regulator-min-microvolt = <3075000>;
-						regulator-max-microvolt = <3075000>;
-
-						regulator-boot-on;
-					};
-				};
-			};
-		};
-	};
-};
-
-&soc {
-	serial@f991e000 {
-		status = "okay";
-	};
-
-	remoteproc@fb21b000 {
-		status = "okay";
-
-		vddmx-supply = <&pm8841_s1>;
-		vddcx-supply = <&pm8841_s2>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&wcnss_pin_a>;
-
-		smd-edge {
-			qcom,remote-pid = <4>;
-			label = "pronto";
-
-			wcnss {
-				status = "okay";
-			};
-		};
-	};
-
-	pinctrl@fd510000 {
-		sdhc1_pin_a: sdhc1-pin-active {
-			clk {
-				pins = "sdc1_clk";
-				drive-strength = <16>;
-				bias-disable;
-			};
-
-			cmd-data {
-				pins = "sdc1_cmd", "sdc1_data";
-				drive-strength = <10>;
-				bias-pull-up;
-			};
-		};
-
-		sdhc2_pin_a: sdhc2-pin-active {
-			clk {
-				pins = "sdc2_clk";
-				drive-strength = <10>;
-				bias-disable;
-			};
-
-			cmd-data {
-				pins = "sdc2_cmd", "sdc2_data";
-				drive-strength = <6>;
-				bias-pull-up;
-			};
-		};
-
-		wcnss_pin_a: wcnss-pin-active {
-			wlan {
-				pins =  "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
-				function = "wlan";
-
-				drive-strength = <6>;
-				bias-pull-down;
-			};
-
-			bt {
-				pins = "gpio35", "gpio43", "gpio44";
-				function = "bt";
-
-				drive-strength = <2>;
-				bias-pull-down;
-			};
-
-			fm {
-				pins = "gpio41", "gpio42";
-				function = "fm";
-
-				drive-strength = <2>;
-				bias-pull-down;
-			};
-		};
-	};
-
-	sdhci@f9824900 {
-		status = "okay";
-
-		vmmc-supply = <&pm8941_l20>;
-		vqmmc-supply = <&pm8941_s3>;
-
-		bus-width = <8>;
-		non-removable;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdhc1_pin_a>;
-	};
-
-	sdhci@f98a4900 {
-		status = "okay";
-
-		vmmc-supply = <&pm8941_l21>;
-		vqmmc-supply = <&pm8941_l13>;
-
-		bus-width = <4>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdhc2_pin_a>;
-	};
-
-	usb@f9a55000 {
-		status = "okay";
-
-		phys = <&usb_hs1_phy>;
-		phy-select = <&tcsr 0xb000 0>;
-		extcon = <&smbb>, <&usb_id>;
-		vbus-supply = <&chg_otg>;
-
-		hnp-disable;
-		srp-disable;
-		adp-disable;
-
-		ulpi {
-			phy@a {
-				status = "okay";
-
-				v1p8-supply = <&pm8941_l6>;
-				v3p3-supply = <&pm8941_l24>;
-
-				extcon = <&smbb>;
-				qcom,init-seq = /bits/ 8 <0x1 0x64>;
-			};
-		};
-	};
-
-	imem@fe805000 {
-		status = "okay";
-
-		reboot-mode {
-			mode-normal	= <0x77665501>;
-			mode-bootloader	= <0x77665500>;
-			mode-recovery	= <0x77665502>;
-		};
-	};
-};
-
-&spmi_bus {
-	pm8941@0 {
-		gpios@c000 {
-			gpio_keys_pin_a: gpio-keys-active {
-				pins = "gpio1", "gpio2", "gpio5";
-				function = "normal";
-
-				bias-pull-up;
-				power-source = <PM8941_GPIO_S3>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
index 069136170198..6daceaa87802 100644
--- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -2,8 +2,8 @@
 #include "qcom-msm8974.dtsi"
 #include "qcom-pm8841.dtsi"
 #include "qcom-pm8941.dtsi"
-#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
 / {
@@ -12,213 +12,31 @@
 
 	aliases {
 		serial0 = &blsp1_uart1;
-		serial1 = &blsp2_uart10;
+		serial1 = &blsp2_uart4;
 	};
 
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
-	smd {
-		rpm {
-			rpm_requests {
-				pm8841-regulators {
-					s1 {
-						regulator-min-microvolt = <675000>;
-						regulator-max-microvolt = <1050000>;
-					};
-
-					s2 {
-						regulator-min-microvolt = <500000>;
-						regulator-max-microvolt = <1050000>;
-					};
-
-					s3 {
-						regulator-min-microvolt = <1050000>;
-						regulator-max-microvolt = <1050000>;
-					};
-
-					s4 {
-						regulator-min-microvolt = <815000>;
-						regulator-max-microvolt = <900000>;
-					};
-				};
-
-				pm8941-regulators {
-					vdd_l1_l3-supply = <&pm8941_s1>;
-					vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
-					vdd_l4_l11-supply = <&pm8941_s1>;
-					vdd_l5_l7-supply = <&pm8941_s2>;
-					vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
-					vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>;
-					vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
-					vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
-					vdd_l21-supply = <&vreg_boost>;
-
-					s1 {
-						regulator-min-microvolt = <1300000>;
-						regulator-max-microvolt = <1300000>;
-
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					s2 {
-						regulator-min-microvolt = <2150000>;
-						regulator-max-microvolt = <2150000>;
-
-						regulator-boot-on;
-					};
-
-					s3 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					l1 {
-						regulator-min-microvolt = <1225000>;
-						regulator-max-microvolt = <1225000>;
-
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					l2 {
-						regulator-min-microvolt = <1200000>;
-						regulator-max-microvolt = <1200000>;
-					};
-
-					l3 {
-						regulator-min-microvolt = <1225000>;
-						regulator-max-microvolt = <1225000>;
-					};
-
-					l4 {
-						regulator-min-microvolt = <1225000>;
-						regulator-max-microvolt = <1225000>;
-					};
-
-					l5 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					l6 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-
-						regulator-boot-on;
-					};
-
-					l7 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-
-						regulator-boot-on;
-					};
-
-					l8 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					l9 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <2950000>;
-					};
-
-					l10 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <2950000>;
-					};
-
-					l11 {
-						regulator-min-microvolt = <1300000>;
-						regulator-max-microvolt = <1300000>;
-					};
-
-					l12 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					l13 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <2950000>;
-
-						regulator-boot-on;
-					};
-
-					l14 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					l15 {
-						regulator-min-microvolt = <2050000>;
-						regulator-max-microvolt = <2050000>;
-					};
-
-					l16 {
-						regulator-min-microvolt = <2700000>;
-						regulator-max-microvolt = <2700000>;
-					};
-
-					l17 {
-						regulator-min-microvolt = <2850000>;
-						regulator-max-microvolt = <2850000>;
-					};
-
-					l18 {
-						regulator-min-microvolt = <2850000>;
-						regulator-max-microvolt = <2850000>;
-					};
-
-					l19 {
-						regulator-min-microvolt = <3000000>;
-						regulator-max-microvolt = <3300000>;
-					};
-
-					l20 {
-						regulator-min-microvolt = <2950000>;
-						regulator-max-microvolt = <2950000>;
-
-						regulator-boot-on;
-						regulator-system-load = <200000>;
-						regulator-allow-set-load;
-					};
-
-					l21 {
-						regulator-min-microvolt = <2950000>;
-						regulator-max-microvolt = <2950000>;
-
-						regulator-boot-on;
-					};
-
-					l22 {
-						regulator-min-microvolt = <3000000>;
-						regulator-max-microvolt = <3300000>;
-					};
-
-					l23 {
-						regulator-min-microvolt = <3000000>;
-						regulator-max-microvolt = <3000000>;
-					};
-
-					l24 {
-						regulator-min-microvolt = <3075000>;
-						regulator-max-microvolt = <3075000>;
-
-						regulator-boot-on;
-					};
-				};
-			};
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pin_a>;
+
+		key-volume-up {
+			label = "volume_up";
+			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		key-volume-down {
+			label = "volume_down";
+			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
 		};
 	};
 
@@ -229,7 +47,7 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 
-		gpio = <&msmgpio 26 GPIO_ACTIVE_HIGH>;
+		gpio = <&tlmm 26 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 
 		pinctrl-names = "default";
@@ -237,525 +55,599 @@
 	};
 };
 
-&soc {
-	serial@f991d000 {
-		status = "okay";
+&blsp1_i2c1 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	charger: bq24192@6b {
+		compatible = "ti,bq24192";
+		reg = <0x6b>;
+		interrupts-extended = <&spmi_bus 0 0xd5 0 IRQ_TYPE_EDGE_FALLING>;
+
+		omit-battery-class;
+
+		usb_otg_vbus: usb-otg-vbus { };
 	};
 
-	pinctrl@fd510000 {
-		sdhc1_pin_a: sdhc1-pin-active {
-			clk {
-				pins = "sdc1_clk";
-				drive-strength = <16>;
-				bias-disable;
-			};
+	fuelgauge: max17048@36 {
+		compatible = "maxim,max17048";
+		reg = <0x36>;
 
-			cmd-data {
-				pins = "sdc1_cmd", "sdc1_data";
-				drive-strength = <10>;
-				bias-pull-up;
-			};
-		};
+		maxim,double-soc;
+		maxim,rcomp = /bits/ 8 <0x4d>;
 
-		sdhc2_pin_a: sdhc2-pin-active {
-			clk {
-				pins = "sdc2_clk";
-				drive-strength = <6>;
-				bias-disable;
-			};
+		interrupt-parent = <&tlmm>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
 
-			cmd-data {
-				pins = "sdc2_cmd", "sdc2_data";
-				drive-strength = <6>;
-				bias-pull-up;
-			};
-		};
+		pinctrl-names = "default";
+		pinctrl-0 = <&fuelgauge_pin>;
 
-		i2c1_pins: i2c1 {
-			mux {
-				pins = "gpio2", "gpio3";
-				function = "blsp_i2c1";
+		maxim,alert-low-soc-level = <2>;
+	};
+};
 
-				drive-strength = <2>;
-				bias-disable;
-			};
-		};
+&blsp1_i2c2 {
+	status = "okay";
+	clock-frequency = <355000>;
 
-		i2c2_pins: i2c2 {
-			mux {
-				pins = "gpio6", "gpio7";
-				function = "blsp_i2c2";
+	synaptics@70 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x70>;
 
-				drive-strength = <2>;
-				bias-disable;
-			};
-		};
+		interrupts-extended = <&tlmm 5 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8941_l22>;
+		vio-supply = <&pm8941_lvs3>;
 
-		i2c3_pins: i2c3 {
-			mux {
-				pins = "gpio10", "gpio11";
-				function = "blsp_i2c3";
-				drive-strength = <2>;
-				bias-disable;
-			};
-		};
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_pin>;
 
-		i2c11_pins: i2c11 {
-			mux {
-				pins = "gpio83", "gpio84";
-				function = "blsp_i2c11";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-				drive-strength = <2>;
-				bias-disable;
-			};
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
 		};
 
-		i2c12_pins: i2c12 {
-			mux {
-				pins = "gpio87", "gpio88";
-				function = "blsp_i2c12";
-				drive-strength = <2>;
-				bias-disable;
-			};
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
 		};
+	};
+};
 
-		mpu6515_pin: mpu6515 {
-			irq {
-				pins = "gpio73";
-				function = "gpio";
-				bias-disable;
-				input-enable;
-			};
-		};
+&blsp1_i2c3 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	avago_apds993@39 {
+		compatible = "avago,apds9930";
+		reg = <0x39>;
+		interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8941_l17>;
+		vddio-supply = <&pm8941_lvs1>;
+		led-max-microamp = <100000>;
+		amstaos,proximity-diodes = <0>;
+	};
+};
 
-		touch_pin: touch {
-			int {
-				pins = "gpio5";
-				function = "gpio";
+&blsp2_i2c5 {
+	status = "okay";
+	clock-frequency = <355000>;
 
-				drive-strength = <2>;
-				bias-disable;
-				input-enable;
-			};
+	led-controller@38 {
+		compatible = "ti,lm3630a";
+		status = "okay";
+		reg = <0x38>;
 
-			reset {
-				pins = "gpio8";
-				function = "gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-				drive-strength = <2>;
-				bias-pull-up;
-			};
+		led@0 {
+			reg = <0>;
+			led-sources = <0 1>;
+			label = "lcd-backlight";
+			default-brightness = <200>;
 		};
+	};
+};
 
-		panel_pin: panel {
-			te {
-				pins = "gpio12";
-				function = "mdp_vsync";
+&blsp2_i2c6 {
+	status = "okay";
+	clock-frequency = <100000>;
 
-				drive-strength = <2>;
-				bias-disable;
-			};
-		};
+	mpu6515@68 {
+		compatible = "invensense,mpu6515";
+		reg = <0x68>;
+		interrupts-extended = <&tlmm 73 IRQ_TYPE_EDGE_FALLING>;
+		vddio-supply = <&pm8941_lvs1>;
 
-		bt_pin: bt {
-			hostwake {
-				pins = "gpio42";
-				function = "gpio";
-			};
+		pinctrl-names = "default";
+		pinctrl-0 = <&mpu6515_pin>;
 
-			devwake {
-				pins = "gpio62";
-				function = "gpio";
+		mount-matrix = "0", "-1", "0",
+				"-1", "0", "0",
+				"0", "0", "1";
+
+		i2c-gate {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ak8963@f {
+				compatible = "asahi-kasei,ak8963";
+				reg = <0x0f>;
+				gpios = <&tlmm 67 GPIO_ACTIVE_HIGH>;
+				vid-supply = <&pm8941_lvs1>;
+				vdd-supply = <&pm8941_l17>;
 			};
 
-			shutdown {
-				pins = "gpio41";
-				function = "gpio";
+			bmp280@76 {
+				compatible = "bosch,bmp280";
+				reg = <0x76>;
+				vdda-supply = <&pm8941_lvs1>;
+				vddd-supply = <&pm8941_l17>;
 			};
 		};
+	};
+};
 
-		blsp2_uart10_pin_a: blsp2-uart10-pin-active {
-			tx {
-				pins = "gpio53";
-				function = "blsp_uart10";
+&blsp1_uart1 {
+	status = "okay";
+};
 
-				drive-strength = <2>;
-				bias-disable;
-			};
+&blsp2_uart4 {
+	status = "okay";
 
-			rx {
-				pins = "gpio54";
-				function = "blsp_uart10";
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <3000000>;
 
-				drive-strength = <2>;
-				bias-pull-up;
-			};
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_pin>;
 
-			cts {
-				pins = "gpio55";
-				function = "blsp_uart10";
+		host-wakeup-gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&tlmm 62 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>;
+	};
+};
 
-				drive-strength = <2>;
-				bias-pull-up;
-			};
+&dsi0 {
+	status = "okay";
 
-			rts {
-				pins = "gpio56";
-				function = "blsp_uart10";
+	vdda-supply = <&pm8941_l2>;
+	vdd-supply = <&pm8941_lvs3>;
+	vddio-supply = <&pm8941_l12>;
 
-				drive-strength = <2>;
-				bias-disable;
+	panel: panel@0 {
+		reg = <0>;
+		compatible = "lg,acx467akm-7";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_pin>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi0_out>;
 			};
 		};
 	};
+};
 
-	sdhci@f9824900 {
-		status = "okay";
+&dsi0_out {
+	remote-endpoint = <&panel_in>;
+	data-lanes = <0 1 2 3>;
+};
 
-		vmmc-supply = <&pm8941_l20>;
-		vqmmc-supply = <&pm8941_s3>;
+&dsi0_phy {
+	status = "okay";
 
-		bus-width = <8>;
-		non-removable;
+	vddio-supply = <&pm8941_l12>;
+};
 
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdhc1_pin_a>;
-	};
+&mdss {
+	status = "okay";
+};
 
-	sdhci@f98a4900 {
-		status = "okay";
+&otg {
+	status = "okay";
 
-		max-frequency = <100000000>;
-		bus-width = <4>;
-		non-removable;
-		vmmc-supply = <&vreg_wlan>;
-		vqmmc-supply = <&pm8941_s3>;
+	phys = <&usb_hs1_phy>;
+	phy-select = <&tcsr 0xb000 0>;
 
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdhc2_pin_a>;
+	extcon = <&charger>, <&usb_id>;
+	vbus-supply = <&usb_otg_vbus>;
 
-		#address-cells = <1>;
-		#size-cells = <0>;
+	hnp-disable;
+	srp-disable;
+	adp-disable;
 
-		bcrmf@1 {
-			compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
-			reg = <1>;
+	ulpi {
+		phy@a {
+			status = "okay";
 
-			brcm,drive-strength = <10>;
+			v1p8-supply = <&pm8941_l6>;
+			v3p3-supply = <&pm8941_l24>;
 
-			pinctrl-names = "default";
-			pinctrl-0 = <&wlan_sleep_clk_pin>;
+			qcom,init-seq = /bits/ 8 <0x1 0x64>;
 		};
 	};
+};
 
-	gpio-keys {
-		compatible = "gpio-keys";
+&pm8941_gpios {
+	gpio_keys_pin_a: gpio-keys-active-state {
+		pins = "gpio2", "gpio3";
+		function = "normal";
 
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys_pin_a>;
+		bias-pull-up;
+		power-source = <PM8941_GPIO_S3>;
+	};
 
-		volume-up {
-			label = "volume_up";
-			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
+	fuelgauge_pin: fuelgauge-int-state {
+		pins = "gpio9";
+		function = "normal";
 
-		volume-down {
-			label = "volume_down";
-			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
+		bias-disable;
+		input-enable;
+		power-source = <PM8941_GPIO_S3>;
 	};
 
-	serial@f9960000 {
-		status = "okay";
+	wlan_sleep_clk_pin: wl-sleep-clk-state {
+		pins = "gpio16";
+		function = "func2";
 
-		pinctrl-names = "default";
-		pinctrl-0 = <&blsp2_uart10_pin_a>;
+		output-high;
+		power-source = <PM8941_GPIO_S3>;
+	};
 
-		bluetooth {
-			compatible = "brcm,bcm43438-bt";
-			max-speed = <3000000>;
+	wlan_regulator_pin: wl-reg-active-state {
+		pins = "gpio17";
+		function = "normal";
 
-			pinctrl-names = "default";
-			pinctrl-0 = <&bt_pin>;
+		bias-disable;
+		power-source = <PM8941_GPIO_S3>;
+	};
 
-			host-wakeup-gpios = <&msmgpio 42 GPIO_ACTIVE_HIGH>;
-			device-wakeup-gpios = <&msmgpio 62 GPIO_ACTIVE_HIGH>;
-			shutdown-gpios = <&msmgpio 41 GPIO_ACTIVE_HIGH>;
-		};
+	otg {
+		gpio-hog;
+		gpios = <35 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "otg-gpio";
 	};
+};
 
-	i2c@f9967000 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c11_pins>;
-		clock-frequency = <355000>;
-		qcom,src-freq = <50000000>;
+&pm8941_lpg {
+	status = "okay";
 
-		led-controller@38 {
-			compatible = "ti,lm3630a";
-			status = "okay";
-			reg = <0x38>;
+	qcom,power-source = <1>;
 
-			#address-cells = <1>;
-			#size-cells = <0>;
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
 
-			led@0 {
-				reg = <0>;
-				led-sources = <0 1>;
-				label = "lcd-backlight";
-				default-brightness = <200>;
-			};
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@7 {
+			reg = <7>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@5 {
+			reg = <5>;
+			color = <LED_COLOR_ID_BLUE>;
 		};
 	};
+};
 
-	i2c@f9968000 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c12_pins>;
-		clock-frequency = <100000>;
-		qcom,src-freq = <50000000>;
-
-		mpu6515@68 {
-			compatible = "invensense,mpu6515";
-			reg = <0x68>;
-			interrupts-extended = <&msmgpio 73 IRQ_TYPE_EDGE_FALLING>;
-			vddio-supply = <&pm8941_lvs1>;
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&mpu6515_pin>;
-
-			mount-matrix = "0", "-1", "0",
-				       "-1", "0", "0",
-				       "0", "0", "1";
-
-			i2c-gate {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				ak8963@f {
-					compatible = "asahi-kasei,ak8963";
-					reg = <0x0f>;
-					gpios = <&msmgpio 67 0>;
-					vid-supply = <&pm8941_lvs1>;
-					vdd-supply = <&pm8941_l17>;
-				};
-
-				bmp280@76 {
-					compatible = "bosch,bmp280";
-					reg = <0x76>;
-					vdda-supply = <&pm8941_lvs1>;
-					vddd-supply = <&pm8941_l17>;
-				};
-			};
+&rpm_requests {
+	pm8841-regulators {
+		compatible = "qcom,rpm-pm8841-regulators";
+
+		pm8841_s1: s1 {
+			regulator-min-microvolt = <675000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s2: s2 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s3: s3 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s4: s4 {
+			regulator-min-microvolt = <815000>;
+			regulator-max-microvolt = <900000>;
 		};
 	};
 
-	i2c@f9923000 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c1_pins>;
-		clock-frequency = <100000>;
-		qcom,src-freq = <50000000>;
+	pm8941-regulators {
+		compatible = "qcom,rpm-pm8941-regulators";
+
+		vdd_l1_l3-supply = <&pm8941_s1>;
+		vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+		vdd_l4_l11-supply = <&pm8941_s1>;
+		vdd_l5_l7-supply = <&pm8941_s2>;
+		vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+		vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>;
+		vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+		vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+		vdd_l21-supply = <&vreg_boost>;
+
+		pm8941_s1: s1 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
 
-		charger: bq24192@6b {
-			compatible = "ti,bq24192";
-			reg = <0x6b>;
-			interrupts-extended = <&spmi_bus 0 0xd5 0 IRQ_TYPE_EDGE_FALLING>;
+		pm8941_s2: s2 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+			regulator-boot-on;
+		};
 
-			omit-battery-class;
+		pm8941_s3: s3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
 
-			usb_otg_vbus: usb-otg-vbus { };
+		pm8941_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			regulator-always-on;
+			regulator-boot-on;
 		};
 
-		fuelgauge: max17048@36 {
-			compatible = "maxim,max17048";
-			reg = <0x36>;
+		pm8941_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
 
-			maxim,double-soc;
-			maxim,rcomp = /bits/ 8 <0x4d>;
+		pm8941_l3: l3 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
 
-			interrupt-parent = <&msmgpio>;
-			interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+		pm8941_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
 
-			pinctrl-names = "default";
-			pinctrl-0 = <&fuelgauge_pin>;
+		pm8941_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
 
-			maxim,alert-low-soc-level = <2>;
+		pm8941_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
 		};
-	};
 
-	i2c@f9924000 {
-		status = "okay";
+		pm8941_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
 
-		clock-frequency = <355000>;
-		qcom,src-freq = <50000000>;
+		pm8941_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
 
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c2_pins>;
+		pm8941_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
 
-		synaptics@70 {
-			compatible = "syna,rmi4-i2c";
-			reg = <0x70>;
+		pm8941_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
 
-			interrupts-extended = <&msmgpio 5 IRQ_TYPE_EDGE_FALLING>;
-			vdd-supply = <&pm8941_l22>;
-			vio-supply = <&pm8941_lvs3>;
+		pm8941_l11: l11 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
 
-			pinctrl-names = "default";
-			pinctrl-0 = <&touch_pin>;
+		pm8941_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
 
-			#address-cells = <1>;
-			#size-cells = <0>;
+		pm8941_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-boot-on;
+		};
 
-			rmi4-f01@1 {
-				reg = <0x1>;
-				syna,nosleep-mode = <1>;
-			};
+		pm8941_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
 
-			rmi4-f12@12 {
-				reg = <0x12>;
-				syna,sensor-type = <1>;
-			};
+		pm8941_l15: l15 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
 		};
-	};
 
-	i2c@f9925000 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c3_pins>;
-		clock-frequency = <100000>;
-		qcom,src-freq = <50000000>;
-
-		avago_apds993@39 {
-			compatible = "avago,apds9930";
-			reg = <0x39>;
-			interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>;
-			vdd-supply = <&pm8941_l17>;
-			vddio-supply = <&pm8941_lvs1>;
-			led-max-microamp = <100000>;
-			amstaos,proximity-diodes = <0>;
+		pm8941_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
 		};
-	};
 
-	usb@f9a55000 {
-		status = "okay";
+		pm8941_l17: l17 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
 
-		phys = <&usb_hs1_phy>;
-		phy-select = <&tcsr 0xb000 0>;
+		pm8941_l18: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
 
-		extcon = <&charger>, <&usb_id>;
-		vbus-supply = <&usb_otg_vbus>;
+		pm8941_l19: l19 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
 
-		hnp-disable;
-		srp-disable;
-		adp-disable;
+		pm8941_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+			regulator-boot-on;
+		};
 
-		ulpi {
-			phy@a {
-				status = "okay";
+		pm8941_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-boot-on;
+		};
 
-				v1p8-supply = <&pm8941_l6>;
-				v3p3-supply = <&pm8941_l24>;
+		pm8941_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
 
-				qcom,init-seq = /bits/ 8 <0x1 0x64>;
-			};
+		pm8941_l23: l23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8941_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+			regulator-boot-on;
 		};
+
+		pm8941_lvs1: lvs1 {};
+		pm8941_lvs3: lvs3 {};
 	};
+};
 
-	mdss@fd900000 {
-		status = "okay";
+&sdhc_1 {
+	status = "okay";
 
-		mdp@fd900000 {
-			status = "okay";
-		};
+	vmmc-supply = <&pm8941_l20>;
+	vqmmc-supply = <&pm8941_s3>;
 
-		dsi@fd922800 {
-			status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_on>;
+	pinctrl-1 = <&sdc1_off>;
+};
 
-			vdda-supply = <&pm8941_l2>;
-			vdd-supply = <&pm8941_lvs3>;
-			vddio-supply = <&pm8941_l12>;
+&sdhc_2 {
+	status = "okay";
 
-			#address-cells = <1>;
-			#size-cells = <0>;
+	max-frequency = <100000000>;
+	vmmc-supply = <&vreg_wlan>;
+	vqmmc-supply = <&pm8941_s3>;
+	non-removable;
 
-			ports {
-				port@1 {
-					endpoint {
-						remote-endpoint = <&panel_in>;
-						data-lanes = <0 1 2 3>;
-					};
-				};
-			};
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_on>;
+	pinctrl-1 = <&sdc2_off>;
 
-			panel: panel@0 {
-				reg = <0>;
-				compatible = "lg,acx467akm-7";
+	bcrmf@1 {
+		compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
+		reg = <1>;
 
-				pinctrl-names = "default";
-				pinctrl-0 = <&panel_pin>;
+		brcm,drive-strength = <10>;
 
-				port {
-					panel_in: endpoint {
-						remote-endpoint = <&dsi0_out>;
-					};
-				};
-			};
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_sleep_clk_pin>;
+	};
+};
+
+&tlmm {
+	sdc1_on: sdc1-on {
+		clk {
+			pins = "sdc1_clk";
+			drive-strength = <16>;
+			bias-disable;
 		};
 
-		dsi-phy@fd922a00 {
-			status = "okay";
+		cmd-data {
+			pins = "sdc1_cmd", "sdc1_data";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+	};
 
-			vddio-supply = <&pm8941_l12>;
+	sdc2_on: sdc2-on {
+		clk {
+			pins = "sdc2_clk";
+			drive-strength = <6>;
+			bias-disable;
+		};
+
+		cmd-data {
+			pins = "sdc2_cmd", "sdc2_data";
+			drive-strength = <6>;
+			bias-pull-up;
 		};
 	};
-};
 
-&spmi_bus {
-	pm8941@0 {
-		gpios@c000 {
-			gpio_keys_pin_a: gpio-keys-active {
-				pins = "gpio2", "gpio3";
-				function = "normal";
+	mpu6515_pin: mpu6515 {
+		pins = "gpio73";
+		function = "gpio";
+		bias-disable;
+		input-enable;
+	};
 
-				bias-pull-up;
-				power-source = <PM8941_GPIO_S3>;
-			};
+	touch_pin: touch {
+		int {
+			pins = "gpio5";
+			function = "gpio";
 
-			fuelgauge_pin: fuelgauge-int {
-				pins = "gpio9";
-				function = "normal";
+			drive-strength = <2>;
+			bias-disable;
+			input-enable;
+		};
 
-				bias-disable;
-				input-enable;
-				power-source = <PM8941_GPIO_S3>;
-			};
+		reset {
+			pins = "gpio8";
+			function = "gpio";
 
-			wlan_sleep_clk_pin: wl-sleep-clk {
-				pins = "gpio16";
-				function = "func2";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
 
-				output-high;
-				power-source = <PM8941_GPIO_S3>;
-			};
+	panel_pin: panel {
+		pins = "gpio12";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-disable;
+	};
 
-			wlan_regulator_pin: wl-reg-active {
-				pins = "gpio17";
-				function = "normal";
+	bt_pin: bt {
+		hostwake {
+			pins = "gpio42";
+			function = "gpio";
+		};
 
-				bias-disable;
-				power-source = <PM8941_GPIO_S3>;
-			};
+		devwake {
+			pins = "gpio62";
+			function = "gpio";
+		};
 
-			otg {
-				gpio-hog;
-				gpios = <35 GPIO_ACTIVE_HIGH>;
-				output-high;
-				line-name = "otg-gpio";
-			};
+		shutdown {
+			pins = "gpio41";
+			function = "gpio";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
deleted file mode 100644
index 96e1c978b878..000000000000
--- a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
+++ /dev/null
@@ -1,908 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-msm8974pro.dtsi"
-#include "qcom-pma8084.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
-	model = "Samsung Galaxy S5";
-	compatible = "samsung,klte", "qcom,msm8974";
-
-	aliases {
-		serial0 = &blsp1_uart1;
-		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
-		mmc1 = &sdhc_2; /* SDC2 SD card slot */
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	smd {
-		rpm {
-			rpm_requests {
-				pma8084-regulators {
-					compatible = "qcom,rpm-pma8084-regulators";
-					status = "okay";
-
-					pma8084_s1: s1 {
-						regulator-min-microvolt = <675000>;
-						regulator-max-microvolt = <1050000>;
-						regulator-always-on;
-					};
-
-					pma8084_s2: s2 {
-						regulator-min-microvolt = <500000>;
-						regulator-max-microvolt = <1050000>;
-					};
-
-					pma8084_s3: s3 {
-						regulator-min-microvolt = <1300000>;
-						regulator-max-microvolt = <1300000>;
-					};
-
-					pma8084_s4: s4 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					pma8084_s5: s5 {
-						regulator-min-microvolt = <2150000>;
-						regulator-max-microvolt = <2150000>;
-					};
-
-					pma8084_s6: s6 {
-						regulator-min-microvolt = <1050000>;
-						regulator-max-microvolt = <1050000>;
-					};
-
-					pma8084_l1: l1 {
-						regulator-min-microvolt = <1225000>;
-						regulator-max-microvolt = <1225000>;
-					};
-
-					pma8084_l2: l2 {
-						regulator-min-microvolt = <1200000>;
-						regulator-max-microvolt = <1200000>;
-					};
-
-					pma8084_l3: l3 {
-						regulator-min-microvolt = <1050000>;
-						regulator-max-microvolt = <1200000>;
-					};
-
-					pma8084_l4: l4 {
-						regulator-min-microvolt = <1200000>;
-						regulator-max-microvolt = <1225000>;
-					};
-
-					pma8084_l5: l5 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					pma8084_l6: l6 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					pma8084_l7: l7 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					pma8084_l8: l8 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					pma8084_l9: l9 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <2950000>;
-					};
-
-					pma8084_l10: l10 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <2950000>;
-					};
-
-					pma8084_l11: l11 {
-						regulator-min-microvolt = <1300000>;
-						regulator-max-microvolt = <1300000>;
-					};
-
-					pma8084_l12: l12 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-						regulator-always-on;
-					};
-
-					pma8084_l13: l13 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <2950000>;
-					};
-
-					pma8084_l14: l14 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					pma8084_l15: l15 {
-						regulator-min-microvolt = <2050000>;
-						regulator-max-microvolt = <2050000>;
-					};
-
-					pma8084_l16: l16 {
-						regulator-min-microvolt = <2700000>;
-						regulator-max-microvolt = <2700000>;
-					};
-
-					pma8084_l17: l17 {
-						regulator-min-microvolt = <2850000>;
-						regulator-max-microvolt = <2850000>;
-					};
-
-					pma8084_l18: l18 {
-						regulator-min-microvolt = <2850000>;
-						regulator-max-microvolt = <2850000>;
-					};
-
-					pma8084_l19: l19 {
-						regulator-min-microvolt = <3300000>;
-						regulator-max-microvolt = <3300000>;
-					};
-
-					pma8084_l20: l20 {
-						regulator-min-microvolt = <2950000>;
-						regulator-max-microvolt = <2950000>;
-
-						regulator-allow-set-load;
-						regulator-system-load = <200000>;
-					};
-
-					pma8084_l21: l21 {
-						regulator-min-microvolt = <2950000>;
-						regulator-max-microvolt = <2950000>;
-
-						regulator-allow-set-load;
-						regulator-system-load = <200000>;
-					};
-
-					pma8084_l22: l22 {
-						regulator-min-microvolt = <3000000>;
-						regulator-max-microvolt = <3300000>;
-					};
-
-					pma8084_l23: l23 {
-						regulator-min-microvolt = <3000000>;
-						regulator-max-microvolt = <3000000>;
-					};
-
-					pma8084_l24: l24 {
-						regulator-min-microvolt = <3075000>;
-						regulator-max-microvolt = <3075000>;
-					};
-
-					pma8084_l25: l25 {
-						regulator-min-microvolt = <2100000>;
-						regulator-max-microvolt = <2100000>;
-					};
-
-					pma8084_l26: l26 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <2050000>;
-					};
-
-					pma8084_l27: l27 {
-						regulator-min-microvolt = <1000000>;
-						regulator-max-microvolt = <1225000>;
-					};
-
-					pma8084_lvs1: lvs1 {};
-					pma8084_lvs2: lvs2 {};
-					pma8084_lvs3: lvs3 {};
-					pma8084_lvs4: lvs4 {};
-
-					pma8084_5vs1: 5vs1 {};
-				};
-			};
-		};
-	};
-
-	i2c-gpio-touchkey {
-		compatible = "i2c-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		sda-gpios = <&msmgpio 95 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&msmgpio 96 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c_touchkey_pins>;
-
-		touchkey@20 {
-			compatible = "cypress,tm2-touchkey";
-			reg = <0x20>;
-
-			interrupt-parent = <&pma8084_gpios>;
-			interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&touchkey_pin>;
-
-			vcc-supply = <&max77826_ldo15>;
-			vdd-supply = <&pma8084_l19>;
-
-			linux,keycodes = <KEY_APPSELECT KEY_BACK>;
-		};
-	};
-
-	i2c-gpio-led {
-		compatible = "i2c-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		scl-gpios = <&msmgpio 121 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		sda-gpios = <&msmgpio 120 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c_led_gpioex_pins>;
-
-		i2c-gpio,delay-us = <2>;
-
-		gpio_expander: gpio@20 {
-			compatible = "nxp,pcal6416";
-			reg = <0x20>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			vcc-supply = <&pma8084_s4>;
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&gpioex_pin>;
-
-			reset-gpios = <&msmgpio 145 GPIO_ACTIVE_LOW>;
-		};
-
-		led-controller@30 {
-			compatible = "panasonic,an30259a";
-			reg = <0x30>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			led@1 {
-				reg = <1>;
-				function = LED_FUNCTION_STATUS;
-				color = <LED_COLOR_ID_RED>;
-			};
-
-			led@2 {
-				reg = <2>;
-				function = LED_FUNCTION_STATUS;
-				color = <LED_COLOR_ID_GREEN>;
-			};
-
-			led@3 {
-				reg = <3>;
-				function = LED_FUNCTION_STATUS;
-				color = <LED_COLOR_ID_BLUE>;
-			};
-		};
-	};
-
-	vreg_wlan: wlan-regulator {
-		compatible = "regulator-fixed";
-
-		regulator-name = "wl-reg";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio_expander 8 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vreg_panel: panel-regulator {
-		compatible = "regulator-fixed";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&panel_en_pin>;
-
-		regulator-name = "panel-vddr-reg";
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-
-		gpio = <&pma8084_gpios 14 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	/delete-node/ vreg-boost;
-
-	adsp-pil {
-		cx-supply = <&pma8084_s2>;
-	};
-};
-
-&soc {
-	serial@f991e000 {
-		status = "okay";
-	};
-
-	/* blsp2_uart8 */
-	serial@f995e000 {
-		status = "okay";
-
-		pinctrl-names = "default", "sleep";
-		pinctrl-0 = <&blsp2_uart8_pins_active>;
-		pinctrl-1 = <&blsp2_uart8_pins_sleep>;
-
-		bluetooth {
-			compatible = "brcm,bcm43540-bt";
-			max-speed = <3000000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&bt_pins>;
-			device-wakeup-gpios = <&msmgpio 91 GPIO_ACTIVE_HIGH>;
-			shutdown-gpios = <&gpio_expander 9 GPIO_ACTIVE_HIGH>;
-			interrupt-parent = <&msmgpio>;
-			interrupts = <75 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "host-wakeup";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys_pin_a>;
-
-		volume-down {
-			label = "volume_down";
-			gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			debounce-interval = <15>;
-		};
-
-		home-key {
-			label = "home_key";
-			gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_HOMEPAGE>;
-			wakeup-source;
-			debounce-interval = <15>;
-		};
-
-		volume-up {
-			label = "volume_up";
-			gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEUP>;
-			debounce-interval = <15>;
-		};
-	};
-
-	pinctrl@fd510000 {
-		blsp2_uart8_pins_active: blsp2-uart8-pins-active {
-			pins = "gpio45", "gpio46", "gpio47", "gpio48";
-			function = "blsp_uart8";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		blsp2_uart8_pins_sleep: blsp2-uart8-pins-sleep {
-			pins = "gpio45", "gpio46", "gpio47", "gpio48";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-
-		bt_pins: bt-pins {
-			hostwake {
-				pins = "gpio75";
-				function = "gpio";
-				drive-strength = <16>;
-				input-enable;
-			};
-
-			devwake {
-				pins = "gpio91";
-				function = "gpio";
-				drive-strength = <2>;
-			};
-		};
-
-		sdhc1_pin_a: sdhc1-pin-active {
-			clk {
-				pins = "sdc1_clk";
-				drive-strength = <4>;
-				bias-disable;
-			};
-
-			cmd-data {
-				pins = "sdc1_cmd", "sdc1_data";
-				drive-strength = <4>;
-				bias-pull-up;
-			};
-		};
-
-		sdhc2_pin_a: sdhc2-pin-active {
-			clk-cmd-data {
-				pins = "gpio35", "gpio36", "gpio37", "gpio38",
-					"gpio39", "gpio40";
-				function = "sdc3";
-				drive-strength = <8>;
-				bias-disable;
-			};
-		};
-
-		sdhc2_cd_pin: sdhc2-cd {
-			pins = "gpio62";
-			function = "gpio";
-
-			drive-strength = <2>;
-			bias-disable;
-		};
-
-		sdhc3_pin_a: sdhc3-pin-active {
-			clk {
-				pins = "sdc2_clk";
-				drive-strength = <6>;
-				bias-disable;
-			};
-
-			cmd-data {
-				pins = "sdc2_cmd", "sdc2_data";
-				drive-strength = <6>;
-				bias-pull-up;
-			};
-		};
-
-		i2c2_pins: i2c2 {
-			mux {
-				pins = "gpio6", "gpio7";
-				function = "blsp_i2c2";
-
-				drive-strength = <2>;
-				bias-disable;
-			};
-		};
-
-		i2c6_pins: i2c6 {
-			mux {
-				pins = "gpio29", "gpio30";
-				function = "blsp_i2c6";
-
-				drive-strength = <2>;
-				bias-disable;
-			};
-		};
-
-		i2c12_pins: i2c12 {
-			mux {
-				pins = "gpio87", "gpio88";
-				function = "blsp_i2c12";
-
-				drive-strength = <2>;
-				bias-disable;
-			};
-		};
-
-		i2c_touchkey_pins: i2c-touchkey {
-			mux {
-				pins = "gpio95", "gpio96";
-				function = "gpio";
-				input-enable;
-				bias-pull-up;
-			};
-		};
-
-		i2c_led_gpioex_pins: i2c-led-gpioex {
-			mux {
-				pins = "gpio120", "gpio121";
-				function = "gpio";
-				input-enable;
-				bias-pull-down;
-			};
-		};
-
-		gpioex_pin: gpioex {
-			res {
-				pins = "gpio145";
-				function = "gpio";
-
-				bias-pull-up;
-				drive-strength = <2>;
-			};
-		};
-
-		wifi_pin: wifi {
-			int {
-				pins = "gpio92";
-				function = "gpio";
-
-				input-enable;
-				bias-pull-down;
-			};
-		};
-
-		panel_te_pin: panel {
-			te {
-				pins = "gpio12";
-				function = "mdp_vsync";
-
-				drive-strength = <2>;
-				bias-disable;
-			};
-		};
-	};
-
-	sdhc_1: sdhci@f9824900 {
-		status = "okay";
-
-		vmmc-supply = <&pma8084_l20>;
-		vqmmc-supply = <&pma8084_s4>;
-
-		bus-width = <8>;
-		non-removable;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdhc1_pin_a>;
-	};
-
-	sdhc_2: sdhci@f9864900 {
-		status = "okay";
-
-		max-frequency = <100000000>;
-
-		vmmc-supply = <&pma8084_l21>;
-		vqmmc-supply = <&pma8084_l13>;
-
-		bus-width = <4>;
-
-		/* cd-gpio is intentionally disabled. If enabled, an SD card
-		 * present during boot is not initialized correctly. Without
-		 * cd-gpios the driver resorts to polling, so hotplug works.
-		 */
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdhc2_pin_a /* &sdhc2_cd_pin */>;
-		// cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>;
-	};
-
-	sdhci@f98a4900 {
-		status = "okay";
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		max-frequency = <100000000>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdhc3_pin_a>;
-
-		vmmc-supply = <&vreg_wlan>;
-		vqmmc-supply = <&pma8084_s4>;
-
-		bus-width = <4>;
-		non-removable;
-
-		wifi@1 {
-			reg = <1>;
-			compatible = "brcm,bcm4329-fmac";
-
-			interrupt-parent = <&msmgpio>;
-			interrupts = <92 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "host-wake";
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&wlan_sleep_clk_pin &wifi_pin>;
-		};
-	};
-
-	usb@f9a55000 {
-		status = "okay";
-
-		phys = <&usb_hs1_phy>;
-		phy-select = <&tcsr 0xb000 0>;
-		/*extcon = <&smbb>, <&usb_id>;*/
-		/*vbus-supply = <&chg_otg>;*/
-
-		hnp-disable;
-		srp-disable;
-		adp-disable;
-
-		ulpi {
-			phy@a {
-				status = "okay";
-
-				v1p8-supply = <&pma8084_l6>;
-				v3p3-supply = <&pma8084_l24>;
-
-				/*extcon = <&smbb>;*/
-				qcom,init-seq = /bits/ 8 <0x1 0x64>;
-			};
-		};
-	};
-
-	i2c@f9924000 {
-		status = "okay";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c2_pins>;
-
-		touchscreen@20 {
-			compatible = "syna,rmi4-i2c";
-			reg = <0x20>;
-
-			interrupt-parent = <&pma8084_gpios>;
-			interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
-
-			vdd-supply = <&max77826_ldo13>;
-			vio-supply = <&pma8084_lvs2>;
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&touch_pin>;
-
-			syna,startup-delay-ms = <100>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			rmi4-f01@1 {
-				reg = <0x1>;
-				syna,nosleep-mode = <1>;
-			};
-
-			rmi4-f12@12 {
-				reg = <0x12>;
-				syna,sensor-type = <1>;
-			};
-		};
-	};
-
-	i2c@f9928000 {
-		status = "okay";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c6_pins>;
-
-		pmic@60 {
-			reg = <0x60>;
-			compatible = "maxim,max77826";
-
-			regulators {
-				max77826_ldo1: LDO1 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				max77826_ldo2: LDO2 {
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-				};
-
-				max77826_ldo3: LDO3 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				max77826_ldo4: LDO4 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				max77826_ldo5: LDO5 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				max77826_ldo6: LDO6 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				max77826_ldo7: LDO7 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				max77826_ldo8: LDO8 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				max77826_ldo9: LDO9 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				max77826_ldo10: LDO10 {
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2950000>;
-				};
-
-				max77826_ldo11: LDO11 {
-					regulator-min-microvolt = <2700000>;
-					regulator-max-microvolt = <2950000>;
-				};
-
-				max77826_ldo12: LDO12 {
-					regulator-min-microvolt = <2500000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				max77826_ldo13: LDO13 {
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				max77826_ldo14: LDO14 {
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				max77826_ldo15: LDO15 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				max77826_buck: BUCK {
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1225000>;
-				};
-
-				max77826_buckboost: BUCKBOOST {
-					regulator-min-microvolt = <3400000>;
-					regulator-max-microvolt = <3400000>;
-				};
-			};
-		};
-	};
-
-	i2c@f9968000 {
-		status = "okay";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c12_pins>;
-
-		fuelgauge@36 {
-			compatible = "maxim,max17048";
-			reg = <0x36>;
-
-			maxim,double-soc;
-			maxim,rcomp = /bits/ 8 <0x56>;
-
-			interrupt-parent = <&pma8084_gpios>;
-			interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&fuelgauge_pin>;
-		};
-	};
-
-	adreno@fdb00000 {
-		status = "ok";
-	};
-
-	mdss@fd900000 {
-		status = "ok";
-
-		mdp@fd900000 {
-			status = "ok";
-		};
-
-		dsi@fd922800 {
-			status = "ok";
-
-			vdda-supply = <&pma8084_l2>;
-			vdd-supply = <&pma8084_l22>;
-			vddio-supply = <&pma8084_l12>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			ports {
-				port@1 {
-					endpoint {
-						remote-endpoint = <&panel_in>;
-						data-lanes = <0 1 2 3>;
-					};
-				};
-			};
-
-			panel: panel@0 {
-				reg = <0>;
-				compatible = "samsung,s6e3fa2";
-
-				pinctrl-names = "default";
-				pinctrl-0 = <&panel_te_pin &panel_rst_pin>;
-
-				iovdd-supply = <&pma8084_lvs4>;
-				vddr-supply = <&vreg_panel>;
-
-				reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>;
-				te-gpios = <&msmgpio 12 GPIO_ACTIVE_HIGH>;
-
-				port {
-					panel_in: endpoint {
-						remote-endpoint = <&dsi0_out>;
-					};
-				};
-			};
-		};
-
-		dsi-phy@fd922a00 {
-			status = "ok";
-
-			vddio-supply = <&pma8084_l12>;
-		};
-	};
-
-	remoteproc@fc880000 {
-		cx-supply = <&pma8084_s2>;
-		mss-supply = <&pma8084_s6>;
-		mx-supply = <&pma8084_s1>;
-		pll-supply = <&pma8084_l12>;
-	};
-};
-
-&spmi_bus {
-	pma8084@0 {
-		gpios@c000 {
-			gpio_keys_pin_a: gpio-keys-active {
-				pins = "gpio2", "gpio3", "gpio5";
-				function = "normal";
-
-				bias-pull-up;
-				power-source = <PMA8084_GPIO_S4>;
-			};
-
-			touchkey_pin: touchkey-int-pin {
-				pins = "gpio6";
-				function = "normal";
-				bias-disable;
-				input-enable;
-				power-source = <PMA8084_GPIO_S4>;
-			};
-
-			touch_pin: touchscreen-int-pin {
-				pins = "gpio8";
-				function = "normal";
-				bias-disable;
-				input-enable;
-				power-source = <PMA8084_GPIO_S4>;
-			};
-
-			panel_en_pin: panel-en-pin {
-				pins = "gpio14";
-				function = "normal";
-				bias-pull-up;
-				power-source = <PMA8084_GPIO_S4>;
-				qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
-			};
-
-			wlan_sleep_clk_pin: wlan-sleep-clk-pin {
-				pins = "gpio16";
-				function = "func2";
-
-				output-high;
-				power-source = <PMA8084_GPIO_S4>;
-				qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
-			};
-
-			panel_rst_pin: panel-rst-pin {
-				pins = "gpio17";
-				function = "normal";
-				bias-disable;
-				power-source = <PMA8084_GPIO_S4>;
-				qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
-			};
-
-
-			fuelgauge_pin: fuelgauge-int-pin {
-				pins = "gpio21";
-				function = "normal";
-				bias-disable;
-				input-enable;
-				power-source = <PMA8084_GPIO_S4>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts
deleted file mode 100644
index 79e2cfbbb1ba..000000000000
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts
+++ /dev/null
@@ -1,435 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-
-/ {
-	model = "Sony Xperia Z1 Compact";
-	compatible = "sony,xperia-amami", "qcom,msm8974";
-
-	aliases {
-		serial0 = &blsp1_uart2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys_pin_a>;
-
-		volume-down {
-			label = "volume_down";
-			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-
-		camera-snapshot {
-			label = "camera_snapshot";
-			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_CAMERA>;
-		};
-
-		camera-focus {
-			label = "camera_focus";
-			gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_CAMERA_FOCUS>;
-		};
-
-		volume-up {
-			label = "volume_up";
-			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-	};
-
-	memory@0 {
-		reg = <0 0x40000000>, <0x40000000 0x40000000>;
-		device_type = "memory";
-	};
-
-	smd {
-		rpm {
-			rpm_requests {
-				pm8841-regulators {
-					s1 {
-						regulator-min-microvolt = <675000>;
-						regulator-max-microvolt = <1050000>;
-					};
-
-					s2 {
-						regulator-min-microvolt = <500000>;
-						regulator-max-microvolt = <1050000>;
-					};
-
-					s3 {
-						regulator-min-microvolt = <500000>;
-						regulator-max-microvolt = <1050000>;
-					};
-
-					s4 {
-						regulator-min-microvolt = <500000>;
-						regulator-max-microvolt = <1050000>;
-					};
-				};
-
-				pm8941-regulators {
-					vdd_l1_l3-supply = <&pm8941_s1>;
-					vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
-					vdd_l4_l11-supply = <&pm8941_s1>;
-					vdd_l5_l7-supply = <&pm8941_s2>;
-					vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
-					vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
-					vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
-					vdd_l21-supply = <&vreg_boost>;
-
-					s1 {
-						regulator-min-microvolt = <1300000>;
-						regulator-max-microvolt = <1300000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					s2 {
-						regulator-min-microvolt = <2150000>;
-						regulator-max-microvolt = <2150000>;
-						regulator-boot-on;
-					};
-
-					s3 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					s4 {
-						regulator-min-microvolt = <5000000>;
-						regulator-max-microvolt = <5000000>;
-					};
-
-					l1 {
-						regulator-min-microvolt = <1225000>;
-						regulator-max-microvolt = <1225000>;
-
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					l2 {
-						regulator-min-microvolt = <1200000>;
-						regulator-max-microvolt = <1200000>;
-					};
-
-					l3 {
-						regulator-min-microvolt = <1200000>;
-						regulator-max-microvolt = <1200000>;
-					};
-
-					l4 {
-						regulator-min-microvolt = <1225000>;
-						regulator-max-microvolt = <1225000>;
-					};
-
-					l5 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					l6 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-
-						regulator-boot-on;
-					};
-
-					l7 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-
-						regulator-boot-on;
-					};
-
-					l8 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					l9 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <2950000>;
-					};
-
-					l11 {
-						regulator-min-microvolt = <1300000>;
-						regulator-max-microvolt = <1350000>;
-					};
-
-					l12 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					l13 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <2950000>;
-
-						regulator-boot-on;
-					};
-
-					l14 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					l15 {
-						regulator-min-microvolt = <2050000>;
-						regulator-max-microvolt = <2050000>;
-					};
-
-					l16 {
-						regulator-min-microvolt = <2700000>;
-						regulator-max-microvolt = <2700000>;
-					};
-
-					l17 {
-						regulator-min-microvolt = <2700000>;
-						regulator-max-microvolt = <2700000>;
-					};
-
-					l18 {
-						regulator-min-microvolt = <2850000>;
-						regulator-max-microvolt = <2850000>;
-					};
-
-					l19 {
-						regulator-min-microvolt = <3300000>;
-						regulator-max-microvolt = <3300000>;
-					};
-
-					l20 {
-						regulator-min-microvolt = <2950000>;
-						regulator-max-microvolt = <2950000>;
-
-						regulator-allow-set-load;
-						regulator-boot-on;
-						regulator-system-load = <200000>;
-					};
-
-					l21 {
-						regulator-min-microvolt = <2950000>;
-						regulator-max-microvolt = <2950000>;
-
-						regulator-boot-on;
-					};
-
-					l22 {
-						regulator-min-microvolt = <3000000>;
-						regulator-max-microvolt = <3000000>;
-					};
-
-					l23 {
-						regulator-min-microvolt = <2800000>;
-						regulator-max-microvolt = <2800000>;
-					};
-
-					l24 {
-						regulator-min-microvolt = <3075000>;
-						regulator-max-microvolt = <3075000>;
-
-						regulator-boot-on;
-					};
-				};
-			};
-		};
-	};
-};
-
-&soc {
-	sdhci@f9824900 {
-		status = "okay";
-
-		vmmc-supply = <&pm8941_l20>;
-		vqmmc-supply = <&pm8941_s3>;
-
-		bus-width = <8>;
-		non-removable;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdhc1_pin_a>;
-	};
-
-	sdhci@f98a4900 {
-		status = "okay";
-
-		bus-width = <4>;
-
-		vmmc-supply = <&pm8941_l21>;
-		vqmmc-supply = <&pm8941_l13>;
-
-		cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
-	};
-
-	serial@f991e000 {
-		status = "okay";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&blsp1_uart2_pin_a>;
-	};
-
-
-	pinctrl@fd510000 {
-		blsp1_uart2_pin_a: blsp1-uart2-pin-active {
-			rx {
-				pins = "gpio5";
-				function = "blsp_uart2";
-
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-
-			tx {
-				pins = "gpio4";
-				function = "blsp_uart2";
-
-				drive-strength = <4>;
-				bias-disable;
-			};
-		};
-
-		i2c2_pins: i2c2 {
-			mux {
-				pins = "gpio6", "gpio7";
-				function = "blsp_i2c2";
-
-				drive-strength = <2>;
-				bias-disable;
-			};
-		};
-
-		sdhc1_pin_a: sdhc1-pin-active {
-			clk {
-				pins = "sdc1_clk";
-				drive-strength = <16>;
-				bias-disable;
-			};
-
-			cmd-data {
-				pins = "sdc1_cmd", "sdc1_data";
-				drive-strength = <10>;
-				bias-pull-up;
-			};
-		};
-
-		sdhc2_cd_pin_a: sdhc2-cd-pin-active {
-			pins = "gpio62";
-			function = "gpio";
-
-			drive-strength = <2>;
-			bias-disable;
-		 };
-
-		sdhc2_pin_a: sdhc2-pin-active {
-			clk {
-				pins = "sdc2_clk";
-				drive-strength = <10>;
-				bias-disable;
-			};
-
-			cmd-data {
-				pins = "sdc2_cmd", "sdc2_data";
-				drive-strength = <6>;
-				bias-pull-up;
-			};
-		};
-	};
-
-	dma-controller@f9944000 {
-		qcom,controlled-remotely;
-	};
-
-	usb@f9a55000 {
-		status = "okay";
-
-		phys = <&usb_hs1_phy>;
-		phy-select = <&tcsr 0xb000 0>;
-		extcon = <&smbb>, <&usb_id>;
-		vbus-supply = <&chg_otg>;
-
-		hnp-disable;
-		srp-disable;
-		adp-disable;
-
-		ulpi {
-			phy@a {
-				status = "okay";
-
-				v1p8-supply = <&pm8941_l6>;
-				v3p3-supply = <&pm8941_l24>;
-
-				extcon = <&smbb>;
-				qcom,init-seq = /bits/ 8 <0x1 0x64>;
-			};
-		};
-	};
-};
-
-&spmi_bus {
-	pm8941@0 {
-		charger@1000 {
-			qcom,fast-charge-safe-current = <1300000>;
-			qcom,fast-charge-current-limit = <1300000>;
-			qcom,dc-current-limit = <1300000>;
-			qcom,fast-charge-safe-voltage = <4400000>;
-			qcom,fast-charge-high-threshold-voltage = <4350000>;
-			qcom,fast-charge-low-threshold-voltage = <3400000>;
-			qcom,auto-recharge-threshold-voltage = <4200000>;
-			qcom,minimum-input-voltage = <4300000>;
-		};
-
-		gpios@c000 {
-			gpio_keys_pin_a: gpio-keys-active {
-				pins = "gpio2", "gpio3", "gpio4", "gpio5";
-				function = "normal";
-
-				bias-pull-up;
-				power-source = <PM8941_GPIO_S3>;
-			};
-		};
-
-		coincell@2800 {
-			status = "okay";
-			qcom,rset-ohms = <2100>;
-			qcom,vset-millivolts = <3000>;
-		};
-	};
-
-	pm8941@1 {
-		wled@d800 {
-			status = "okay";
-
-			qcom,cs-out;
-			qcom,current-limit = <20>;
-			qcom,current-boost-limit = <805>;
-			qcom,switching-freq = <1600>;
-			qcom,ovp = <29>;
-			qcom,num-strings = <2>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts
deleted file mode 100644
index e66937e3f7dd..000000000000
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts
+++ /dev/null
@@ -1,723 +0,0 @@
-#include "qcom-msm8974pro.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-
-/ {
-	model = "Sony Xperia Z2 Tablet";
-	compatible = "sony,xperia-castor", "qcom,msm8974";
-
-	aliases {
-		serial0 = &blsp1_uart2;
-		serial1 = &blsp2_uart7;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys_pin_a>;
-
-		volume-down {
-			label = "volume_down";
-			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-
-		camera-snapshot {
-			label = "camera_snapshot";
-			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_CAMERA>;
-		};
-
-		camera-focus {
-			label = "camera_focus";
-			gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_CAMERA_FOCUS>;
-		};
-
-		volume-up {
-			label = "volume_up";
-			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-	};
-
-	smd {
-		rpm {
-			rpm_requests {
-				pm8941-regulators {
-					vdd_l1_l3-supply = <&pm8941_s1>;
-					vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
-					vdd_l4_l11-supply = <&pm8941_s1>;
-					vdd_l5_l7-supply = <&pm8941_s2>;
-					vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
-					vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
-					vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
-					vdd_l21-supply = <&vreg_boost>;
-
-					s1 {
-						regulator-min-microvolt = <1300000>;
-						regulator-max-microvolt = <1300000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					s2 {
-						regulator-min-microvolt = <2150000>;
-						regulator-max-microvolt = <2150000>;
-						regulator-boot-on;
-					};
-
-					s3 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-						regulator-always-on;
-						regulator-boot-on;
-
-						regulator-system-load = <154000>;
-					};
-
-					s4 {
-						regulator-min-microvolt = <5000000>;
-						regulator-max-microvolt = <5000000>;
-					};
-
-					l1 {
-						regulator-min-microvolt = <1225000>;
-						regulator-max-microvolt = <1225000>;
-
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					l2 {
-						regulator-min-microvolt = <1200000>;
-						regulator-max-microvolt = <1200000>;
-					};
-
-					l3 {
-						regulator-min-microvolt = <1200000>;
-						regulator-max-microvolt = <1200000>;
-					};
-
-					l4 {
-						regulator-min-microvolt = <1225000>;
-						regulator-max-microvolt = <1225000>;
-					};
-
-					l5 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					l6 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-
-						regulator-boot-on;
-					};
-
-					l7 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-
-						regulator-boot-on;
-					};
-
-					l8 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					l9 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <2950000>;
-					};
-
-					l11 {
-						regulator-min-microvolt = <1300000>;
-						regulator-max-microvolt = <1350000>;
-					};
-
-					l12 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					l13 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <2950000>;
-
-						regulator-boot-on;
-					};
-
-					l14 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					l15 {
-						regulator-min-microvolt = <2050000>;
-						regulator-max-microvolt = <2050000>;
-					};
-
-					l16 {
-						regulator-min-microvolt = <2700000>;
-						regulator-max-microvolt = <2700000>;
-					};
-
-					l17 {
-						regulator-min-microvolt = <2700000>;
-						regulator-max-microvolt = <2700000>;
-					};
-
-					l18 {
-						regulator-min-microvolt = <2850000>;
-						regulator-max-microvolt = <2850000>;
-					};
-
-					l19 {
-						regulator-min-microvolt = <2850000>;
-						regulator-max-microvolt = <2850000>;
-					};
-
-					l20 {
-						regulator-min-microvolt = <2950000>;
-						regulator-max-microvolt = <2950000>;
-
-						regulator-allow-set-load;
-						regulator-boot-on;
-						regulator-allow-set-load;
-						regulator-system-load = <500000>;
-					};
-
-					l21 {
-						regulator-min-microvolt = <2950000>;
-						regulator-max-microvolt = <2950000>;
-
-						regulator-boot-on;
-					};
-
-					l22 {
-						regulator-min-microvolt = <3000000>;
-						regulator-max-microvolt = <3000000>;
-					};
-
-					l23 {
-						regulator-min-microvolt = <2800000>;
-						regulator-max-microvolt = <2800000>;
-					};
-
-					l24 {
-						regulator-min-microvolt = <3075000>;
-						regulator-max-microvolt = <3075000>;
-
-						regulator-boot-on;
-					};
-				};
-			};
-		};
-	};
-
-	vreg_bl_vddio: lcd-backlight-vddio {
-		compatible = "regulator-fixed";
-		regulator-name = "vreg_bl_vddio";
-		regulator-min-microvolt = <3150000>;
-		regulator-max-microvolt = <3150000>;
-
-		gpio = <&msmgpio 69 0>;
-		enable-active-high;
-
-		vin-supply = <&pm8941_s3>;
-		startup-delay-us = <70000>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_backlight_en_pin_a>;
-	};
-
-	vreg_vsp: lcd-dcdc-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vreg_vsp";
-		regulator-min-microvolt = <5600000>;
-		regulator-max-microvolt = <5600000>;
-
-		gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_dcdc_en_pin_a>;
-	};
-
-	vreg_wlan: wlan-regulator {
-		compatible = "regulator-fixed";
-
-		regulator-name = "wl-reg";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&wlan_regulator_pin>;
-	};
-};
-
-&soc {
-	sdhci@f9824900 {
-		status = "okay";
-
-		vmmc-supply = <&pm8941_l20>;
-		vqmmc-supply = <&pm8941_s3>;
-
-		bus-width = <8>;
-		non-removable;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdhc1_pin_a>;
-	};
-
-	sdhci@f9864900 {
-		status = "okay";
-
-		max-frequency = <100000000>;
-		non-removable;
-		vmmc-supply = <&vreg_wlan>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdhc3_pin_a>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		bcrmf@1 {
-			compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
-			reg = <1>;
-
-			brcm,drive-strength = <10>;
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&wlan_sleep_clk_pin>;
-		};
-	};
-
-	sdhci@f98a4900 {
-		status = "okay";
-
-		bus-width = <4>;
-
-		vmmc-supply = <&pm8941_l21>;
-		vqmmc-supply = <&pm8941_l13>;
-
-		cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
-	};
-
-	serial@f991e000 {
-		status = "okay";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&blsp1_uart2_pin_a>;
-	};
-
-	serial@f995d000 {
-		status = "ok";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&blsp2_uart7_pin_a>;
-
-		bluetooth {
-			compatible = "brcm,bcm43438-bt";
-			max-speed = <3000000>;
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&bt_host_wake_pin>,
-				    <&bt_dev_wake_pin>,
-				    <&bt_reg_on_pin>;
-
-			host-wakeup-gpios = <&msmgpio 95 GPIO_ACTIVE_HIGH>;
-			device-wakeup-gpios = <&msmgpio 96 GPIO_ACTIVE_HIGH>;
-			shutdown-gpios = <&pm8941_gpios 16 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	usb@f9a55000 {
-		status = "okay";
-
-		phys = <&usb_hs1_phy>;
-		phy-select = <&tcsr 0xb000 0>;
-		extcon = <&smbb>, <&usb_id>;
-		vbus-supply = <&chg_otg>;
-
-		hnp-disable;
-		srp-disable;
-		adp-disable;
-
-		ulpi {
-			phy@a {
-				status = "okay";
-
-				v1p8-supply = <&pm8941_l6>;
-				v3p3-supply = <&pm8941_l24>;
-
-				extcon = <&smbb>;
-				qcom,init-seq = /bits/ 8 <0x1 0x64>;
-			};
-		};
-	};
-
-	pinctrl@fd510000 {
-		blsp1_uart2_pin_a: blsp1-uart2-pin-active {
-			rx {
-				pins = "gpio5";
-				function = "blsp_uart2";
-
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-
-			tx {
-				pins = "gpio4";
-				function = "blsp_uart2";
-
-				drive-strength = <4>;
-				bias-disable;
-			};
-		};
-
-		blsp2_uart7_pin_a: blsp2-uart7-pin-active {
-			tx {
-				pins = "gpio41";
-				function = "blsp_uart7";
-
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			rx {
-				pins = "gpio42";
-				function = "blsp_uart7";
-
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-
-			cts {
-				pins = "gpio43";
-				function = "blsp_uart7";
-
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-
-			rts {
-				pins = "gpio44";
-				function = "blsp_uart7";
-
-				drive-strength = <2>;
-				bias-disable;
-			};
-		};
-
-		i2c8_pins: i2c8 {
-			mux {
-				pins = "gpio47", "gpio48";
-				function = "blsp_i2c8";
-
-				drive-strength = <2>;
-				bias-disable;
-			};
-		};
-
-		i2c11_pins: i2c11 {
-			mux {
-				pins = "gpio83", "gpio84";
-				function = "blsp_i2c11";
-
-				drive-strength = <2>;
-				bias-disable;
-			};
-		};
-
-		lcd_backlight_en_pin_a: lcd-backlight-vddio {
-			pins = "gpio69";
-			drive-strength = <10>;
-			output-low;
-			bias-disable;
-		};
-
-		sdhc1_pin_a: sdhc1-pin-active {
-			clk {
-				pins = "sdc1_clk";
-				drive-strength = <16>;
-				bias-disable;
-			};
-
-			cmd-data {
-				pins = "sdc1_cmd", "sdc1_data";
-				drive-strength = <10>;
-				bias-pull-up;
-			};
-		};
-
-		sdhc2_cd_pin_a: sdhc2-cd-pin-active {
-			pins = "gpio62";
-			function = "gpio";
-
-			drive-strength = <2>;
-			bias-disable;
-		 };
-
-		sdhc2_pin_a: sdhc2-pin-active {
-			clk {
-				pins = "sdc2_clk";
-				drive-strength = <6>;
-				bias-disable;
-			};
-
-			cmd-data {
-				pins = "sdc2_cmd", "sdc2_data";
-				drive-strength = <6>;
-				bias-pull-up;
-			};
-		};
-
-		sdhc3_pin_a: sdhc3-pin-active {
-			clk {
-				pins = "gpio40";
-				function = "sdc3";
-
-				drive-strength = <10>;
-				bias-disable;
-			};
-
-			cmd {
-				pins = "gpio39";
-				function = "sdc3";
-
-				drive-strength = <10>;
-				bias-pull-up;
-			};
-
-			data {
-				pins = "gpio35", "gpio36", "gpio37", "gpio38";
-				function = "sdc3";
-
-				drive-strength = <10>;
-				bias-pull-up;
-			};
-		};
-
-		ts_int_pin: synaptics {
-			pin {
-				pins = "gpio86";
-				function = "gpio";
-
-				drive-strength = <2>;
-				bias-disable;
-				input-enable;
-			};
-		};
-
-		bt_host_wake_pin: bt-host-wake {
-			pins = "gpio95";
-			function = "gpio";
-
-			drive-strength = <2>;
-			bias-disable;
-			output-low;
-		};
-
-		bt_dev_wake_pin: bt-dev-wake {
-			pins = "gpio96";
-			function = "gpio";
-
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
-	i2c@f9964000 {
-		status = "okay";
-
-		clock-frequency = <355000>;
-		qcom,src-freq = <50000000>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c8_pins>;
-
-		synaptics@2c {
-			compatible = "syna,rmi4-i2c";
-			reg = <0x2c>;
-
-			interrupt-parent = <&msmgpio>;
-			interrupts = <86 IRQ_TYPE_EDGE_FALLING>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			vdd-supply = <&pm8941_l22>;
-			vio-supply = <&pm8941_lvs3>;
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&ts_int_pin>;
-
-			syna,startup-delay-ms = <10>;
-
-			rmi-f01@1 {
-				reg = <0x1>;
-				syna,nosleep = <1>;
-			};
-
-			rmi-f11@11 {
-				reg = <0x11>;
-				syna,f11-flip-x = <1>;
-				syna,sensor-type = <1>;
-			};
-		};
-	};
-
-	i2c@f9967000 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c11_pins>;
-		clock-frequency = <355000>;
-		qcom,src-freq = <50000000>;
-
-		lp8566_wled: backlight@2c {
-			compatible = "ti,lp8556";
-			reg = <0x2c>;
-			power-supply = <&vreg_bl_vddio>;
-
-			bl-name = "backlight";
-			dev-ctrl = /bits/ 8 <0x05>;
-			init-brt = /bits/ 8 <0x3f>;
-			rom_a0h {
-				rom-addr = /bits/ 8 <0xa0>;
-				rom-val = /bits/ 8 <0xff>;
-			};
-			rom_a1h {
-				rom-addr = /bits/ 8 <0xa1>;
-				rom-val = /bits/ 8 <0x3f>;
-			};
-			rom_a2h {
-				rom-addr = /bits/ 8 <0xa2>;
-				rom-val = /bits/ 8 <0x20>;
-			};
-			rom_a3h {
-				rom-addr = /bits/ 8 <0xa3>;
-				rom-val = /bits/ 8 <0x5e>;
-			};
-			rom_a4h {
-				rom-addr = /bits/ 8 <0xa4>;
-				rom-val = /bits/ 8 <0x02>;
-			};
-			rom_a5h {
-				rom-addr = /bits/ 8 <0xa5>;
-				rom-val = /bits/ 8 <0x04>;
-			};
-			rom_a6h {
-				rom-addr = /bits/ 8 <0xa6>;
-				rom-val = /bits/ 8 <0x80>;
-			};
-			rom_a7h {
-				rom-addr = /bits/ 8 <0xa7>;
-				rom-val = /bits/ 8 <0xf7>;
-			};
-			rom_a9h {
-				rom-addr = /bits/ 8 <0xa9>;
-				rom-val = /bits/ 8 <0x80>;
-			};
-			rom_aah {
-				rom-addr = /bits/ 8 <0xaa>;
-				rom-val = /bits/ 8 <0x0f>;
-			};
-			rom_aeh {
-				rom-addr = /bits/ 8 <0xae>;
-				rom-val = /bits/ 8 <0x0f>;
-			};
-		};
-	};
-};
-
-&spmi_bus {
-	pm8941@0 {
-		charger@1000 {
-			qcom,fast-charge-safe-current = <1500000>;
-			qcom,fast-charge-current-limit = <1500000>;
-			qcom,dc-current-limit = <1800000>;
-			qcom,fast-charge-safe-voltage = <4400000>;
-			qcom,fast-charge-high-threshold-voltage = <4350000>;
-			qcom,fast-charge-low-threshold-voltage = <3400000>;
-			qcom,auto-recharge-threshold-voltage = <4200000>;
-			qcom,minimum-input-voltage = <4300000>;
-		};
-
-		gpios@c000 {
-			gpio_keys_pin_a: gpio-keys-active {
-				pins = "gpio2", "gpio5";
-				function = "normal";
-
-				bias-pull-up;
-				power-source = <PM8941_GPIO_S3>;
-			};
-
-			bt_reg_on_pin: bt-reg-on {
-				pins = "gpio16";
-				function = "normal";
-
-				output-low;
-				power-source = <PM8941_GPIO_S3>;
-			};
-
-			wlan_sleep_clk_pin: wl-sleep-clk {
-				pins = "gpio17";
-				function = "func2";
-
-				output-high;
-				power-source = <PM8941_GPIO_S3>;
-			};
-
-			wlan_regulator_pin: wl-reg-active {
-				pins = "gpio18";
-				function = "normal";
-
-				bias-disable;
-				power-source = <PM8941_GPIO_S3>;
-			};
-
-			lcd_dcdc_en_pin_a: lcd-dcdc-en-active {
-				pins = "gpio20";
-				function = "normal";
-
-				bias-disable;
-				power-source = <PM8941_GPIO_S3>;
-				input-disable;
-				output-low;
-			};
-
-		};
-
-		coincell@2800 {
-			status = "okay";
-			qcom,rset-ohms = <2100>;
-			qcom,vset-millivolts = <3000>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
deleted file mode 100644
index a62e5c25b23c..000000000000
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
+++ /dev/null
@@ -1,484 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-
-/ {
-	model = "Sony Xperia Z1";
-	compatible = "sony,xperia-honami", "qcom,msm8974";
-
-	aliases {
-		serial0 = &blsp1_uart2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys_pin_a>;
-
-		volume-down {
-			label = "volume_down";
-			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-
-		camera-snapshot {
-			label = "camera_snapshot";
-			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_CAMERA>;
-		};
-
-		camera-focus {
-			label = "camera_focus";
-			gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_CAMERA_FOCUS>;
-		};
-
-		volume-up {
-			label = "volume_up";
-			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-	};
-
-	memory@0 {
-		reg = <0 0x40000000>, <0x40000000 0x40000000>;
-		device_type = "memory";
-	};
-
-	smd {
-		rpm {
-			rpm_requests {
-				pm8841-regulators {
-					s1 {
-						regulator-min-microvolt = <675000>;
-						regulator-max-microvolt = <1050000>;
-					};
-
-					s2 {
-						regulator-min-microvolt = <500000>;
-						regulator-max-microvolt = <1050000>;
-					};
-
-					s3 {
-						regulator-min-microvolt = <500000>;
-						regulator-max-microvolt = <1050000>;
-					};
-
-					s4 {
-						regulator-min-microvolt = <500000>;
-						regulator-max-microvolt = <1050000>;
-					};
-				};
-
-				pm8941-regulators {
-					vdd_l1_l3-supply = <&pm8941_s1>;
-					vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
-					vdd_l4_l11-supply = <&pm8941_s1>;
-					vdd_l5_l7-supply = <&pm8941_s2>;
-					vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
-					vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
-					vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
-					vdd_l21-supply = <&vreg_boost>;
-
-					s1 {
-						regulator-min-microvolt = <1300000>;
-						regulator-max-microvolt = <1300000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					s2 {
-						regulator-min-microvolt = <2150000>;
-						regulator-max-microvolt = <2150000>;
-						regulator-boot-on;
-					};
-
-					s3 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					s4 {
-						regulator-min-microvolt = <5000000>;
-						regulator-max-microvolt = <5000000>;
-					};
-
-					l1 {
-						regulator-min-microvolt = <1225000>;
-						regulator-max-microvolt = <1225000>;
-
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					l2 {
-						regulator-min-microvolt = <1200000>;
-						regulator-max-microvolt = <1200000>;
-					};
-
-					l3 {
-						regulator-min-microvolt = <1200000>;
-						regulator-max-microvolt = <1200000>;
-					};
-
-					l4 {
-						regulator-min-microvolt = <1225000>;
-						regulator-max-microvolt = <1225000>;
-					};
-
-					l5 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					l6 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-
-						regulator-boot-on;
-					};
-
-					l7 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-
-						regulator-boot-on;
-					};
-
-					l8 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					l9 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <2950000>;
-					};
-
-					l11 {
-						regulator-min-microvolt = <1300000>;
-						regulator-max-microvolt = <1350000>;
-					};
-
-					l12 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					l13 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <2950000>;
-
-						regulator-boot-on;
-					};
-
-					l14 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					l15 {
-						regulator-min-microvolt = <2050000>;
-						regulator-max-microvolt = <2050000>;
-					};
-
-					l16 {
-						regulator-min-microvolt = <2700000>;
-						regulator-max-microvolt = <2700000>;
-					};
-
-					l17 {
-						regulator-min-microvolt = <2700000>;
-						regulator-max-microvolt = <2700000>;
-					};
-
-					l18 {
-						regulator-min-microvolt = <2850000>;
-						regulator-max-microvolt = <2850000>;
-					};
-
-					l19 {
-						regulator-min-microvolt = <3300000>;
-						regulator-max-microvolt = <3300000>;
-					};
-
-					l20 {
-						regulator-min-microvolt = <2950000>;
-						regulator-max-microvolt = <2950000>;
-
-						regulator-allow-set-load;
-						regulator-boot-on;
-						regulator-system-load = <200000>;
-					};
-
-					l21 {
-						regulator-min-microvolt = <2950000>;
-						regulator-max-microvolt = <2950000>;
-
-						regulator-boot-on;
-					};
-
-					l22 {
-						regulator-min-microvolt = <3000000>;
-						regulator-max-microvolt = <3000000>;
-					};
-
-					l23 {
-						regulator-min-microvolt = <2800000>;
-						regulator-max-microvolt = <2800000>;
-					};
-
-					l24 {
-						regulator-min-microvolt = <3075000>;
-						regulator-max-microvolt = <3075000>;
-
-						regulator-boot-on;
-					};
-				};
-			};
-		};
-	};
-};
-
-&soc {
-	usb@f9a55000 {
-		status = "okay";
-
-		phys = <&usb_hs1_phy>;
-		phy-select = <&tcsr 0xb000 0>;
-		extcon = <&smbb>, <&usb_id>;
-		vbus-supply = <&chg_otg>;
-
-		hnp-disable;
-		srp-disable;
-		adp-disable;
-
-		ulpi {
-			phy@a {
-				status = "okay";
-
-				v1p8-supply = <&pm8941_l6>;
-				v3p3-supply = <&pm8941_l24>;
-
-				extcon = <&smbb>;
-				qcom,init-seq = /bits/ 8 <0x1 0x64>;
-			};
-		};
-	};
-
-	sdhci@f9824900 {
-		status = "okay";
-
-		vmmc-supply = <&pm8941_l20>;
-		vqmmc-supply = <&pm8941_s3>;
-
-		bus-width = <8>;
-		non-removable;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdhc1_pin_a>;
-	};
-
-	sdhci@f98a4900 {
-		status = "okay";
-
-		bus-width = <4>;
-
-		vmmc-supply = <&pm8941_l21>;
-		vqmmc-supply = <&pm8941_l13>;
-
-		cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
-	};
-
-	serial@f991e000 {
-		status = "okay";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&blsp1_uart2_pin_a>;
-	};
-
-	i2c@f9924000 {
-		status = "okay";
-
-		clock-frequency = <355000>;
-		qcom,src-freq = <50000000>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c2_pins>;
-
-		synaptics@2c {
-			compatible = "syna,rmi4-i2c";
-			reg = <0x2c>;
-
-			interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			vdd-supply = <&pm8941_l22>;
-			vio-supply = <&pm8941_lvs3>;
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&ts_int_pin>;
-
-			syna,startup-delay-ms = <10>;
-
-			rmi4-f01@1 {
-				reg = <0x1>;
-				syna,nosleep-mode = <1>;
-			};
-
-			rmi4-f11@11 {
-				reg = <0x11>;
-				touchscreen-inverted-x;
-				syna,sensor-type = <1>;
-			};
-		};
-	};
-
-	pinctrl@fd510000 {
-		blsp1_uart2_pin_a: blsp1-uart2-pin-active {
-			rx {
-				pins = "gpio5";
-				function = "blsp_uart2";
-
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-
-			tx {
-				pins = "gpio4";
-				function = "blsp_uart2";
-
-				drive-strength = <4>;
-				bias-disable;
-			};
-		};
-
-		i2c2_pins: i2c2 {
-			mux {
-				pins = "gpio6", "gpio7";
-				function = "blsp_i2c2";
-
-				drive-strength = <2>;
-				bias-disable;
-			};
-		};
-
-		sdhc1_pin_a: sdhc1-pin-active {
-			clk {
-				pins = "sdc1_clk";
-				drive-strength = <16>;
-				bias-disable;
-			};
-
-			cmd-data {
-				pins = "sdc1_cmd", "sdc1_data";
-				drive-strength = <10>;
-				bias-pull-up;
-			};
-		};
-
-		sdhc2_cd_pin_a: sdhc2-cd-pin-active {
-			pins = "gpio62";
-			function = "gpio";
-
-			drive-strength = <2>;
-			bias-disable;
-		 };
-
-		sdhc2_pin_a: sdhc2-pin-active {
-			clk {
-				pins = "sdc2_clk";
-				drive-strength = <10>;
-				bias-disable;
-			};
-
-			cmd-data {
-				pins = "sdc2_cmd", "sdc2_data";
-				drive-strength = <6>;
-				bias-pull-up;
-			};
-		};
-
-		ts_int_pin: touch-int {
-			pin {
-				pins = "gpio61";
-				function = "gpio";
-
-				drive-strength = <2>;
-				bias-disable;
-				input-enable;
-			};
-		};
-	};
-
-	dma-controller@f9944000 {
-		qcom,controlled-remotely;
-	};
-};
-
-&spmi_bus {
-	pm8941@0 {
-		charger@1000 {
-			qcom,fast-charge-safe-current = <1500000>;
-			qcom,fast-charge-current-limit = <1500000>;
-			qcom,dc-current-limit = <1800000>;
-			qcom,fast-charge-safe-voltage = <4400000>;
-			qcom,fast-charge-high-threshold-voltage = <4350000>;
-			qcom,fast-charge-low-threshold-voltage = <3400000>;
-			qcom,auto-recharge-threshold-voltage = <4200000>;
-			qcom,minimum-input-voltage = <4300000>;
-		};
-
-		gpios@c000 {
-			gpio_keys_pin_a: gpio-keys-active {
-				pins = "gpio2", "gpio3", "gpio4", "gpio5";
-				function = "normal";
-
-				bias-pull-up;
-				power-source = <PM8941_GPIO_S3>;
-			};
-		};
-
-		coincell@2800 {
-			status = "okay";
-			qcom,rset-ohms = <2100>;
-			qcom,vset-millivolts = <3000>;
-		};
-	};
-
-	pm8941@1 {
-		wled@d800 {
-			status = "okay";
-
-			qcom,cs-out;
-			qcom,current-limit = <20>;
-			qcom,current-boost-limit = <805>;
-			qcom,switching-freq = <1600>;
-			qcom,ovp = <29>;
-			qcom,num-strings = <2>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-amami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-amami.dts
new file mode 100644
index 000000000000..68d5626bf491
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-amami.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974-sony-xperia-rhine.dtsi"
+
+/ {
+	model = "Sony Xperia Z1 Compact";
+	compatible = "sony,xperia-amami", "qcom,msm8974";
+};
+
+&smbb {
+	qcom,fast-charge-safe-current = <1300000>;
+	qcom,fast-charge-current-limit = <1300000>;
+	qcom,dc-current-limit = <1300000>;
+};
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-honami.dts
new file mode 100644
index 000000000000..ea6a941d8f8c
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-honami.dts
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974-sony-xperia-rhine.dtsi"
+
+/ {
+	model = "Sony Xperia Z1";
+	compatible = "sony,xperia-honami", "qcom,msm8974";
+};
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
new file mode 100644
index 000000000000..5a70683d9103
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
@@ -0,0 +1,487 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974.dtsi"
+#include "qcom-pm8841.dtsi"
+#include "qcom-pm8941.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pin_a>;
+
+		key-volume-down {
+			label = "volume_down";
+			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		key-camera-snapshot {
+			label = "camera_snapshot";
+			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA>;
+		};
+
+		key-camera-focus {
+			label = "camera_focus";
+			gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA_FOCUS>;
+		};
+
+		key-volume-up {
+			label = "volume_up";
+			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@3e8e0000 {
+			compatible = "ramoops";
+			reg = <0x3e8e0000 0x200000>;
+
+			console-size = <0x100000>;
+			record-size = <0x10000>;
+			ftrace-size = <0x10000>;
+			pmsg-size = <0x80000>;
+		};
+	};
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+	clock-frequency = <355000>;
+
+	synaptics@2c {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x2c>;
+
+		interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd-supply = <&pm8941_l22>;
+		vio-supply = <&pm8941_lvs3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_pin>;
+
+		syna,startup-delay-ms = <10>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			touchscreen-inverted-x;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_i2c6 {
+	status = "okay";
+	clock-frequency = <355000>;
+
+	nfc@28 {
+		compatible = "nxp,pn544-i2c";
+		reg = <0x28>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <59 IRQ_TYPE_EDGE_RISING>;
+
+		enable-gpios = <&pm8941_gpios 23 GPIO_ACTIVE_HIGH>;
+		firmware-gpios = <&tlmm 77 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&blsp2_dma {
+	qcom,controlled-remotely;
+};
+
+&blsp2_i2c5 {
+	status = "okay";
+	clock-frequency = <355000>;
+
+	/* sii8334 MHL HDMI bridge */
+};
+
+&otg {
+	status = "okay";
+
+	phys = <&usb_hs1_phy>;
+	phy-select = <&tcsr 0xb000 0>;
+	extcon = <&smbb>, <&usb_id>;
+	vbus-supply = <&chg_otg>;
+
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+
+	ulpi {
+		phy@a {
+			status = "okay";
+
+			v1p8-supply = <&pm8941_l6>;
+			v3p3-supply = <&pm8941_l24>;
+
+			extcon = <&smbb>;
+			qcom,init-seq = /bits/ 8 <0x1 0x64>;
+		};
+	};
+};
+
+&pm8941_coincell {
+	status = "okay";
+	qcom,rset-ohms = <2100>;
+	qcom,vset-millivolts = <3000>;
+};
+
+&pm8941_gpios {
+	gpio_keys_pin_a: gpio-keys-active-state {
+		pins = "gpio2", "gpio3", "gpio4", "gpio5";
+		function = "normal";
+
+		bias-pull-up;
+		power-source = <PM8941_GPIO_S3>;
+	};
+};
+
+&pm8941_lpg {
+	status = "okay";
+
+	qcom,power-source = <1>;
+
+	rgb-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@5 {
+			reg = <5>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+
+		led@6 {
+			reg = <6>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@7 {
+			reg = <7>;
+			color = <LED_COLOR_ID_RED>;
+		};
+	};
+};
+
+&pm8941_wled {
+	status = "okay";
+
+	qcom,cs-out;
+	qcom,current-limit = <20>;
+	qcom,current-boost-limit = <805>;
+	qcom,switching-freq = <1600>;
+	qcom,ovp = <29>;
+	qcom,num-strings = <2>;
+};
+
+&rpm_requests {
+	pm8841-regulators {
+		compatible = "qcom,rpm-pm8841-regulators";
+
+		pm8841_s1: s1 {
+			regulator-min-microvolt = <675000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s2: s2 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s3: s3 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s4: s4 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+	};
+
+	pm8941-regulators {
+		compatible = "qcom,rpm-pm8941-regulators";
+
+		vdd_l1_l3-supply = <&pm8941_s1>;
+		vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+		vdd_l4_l11-supply = <&pm8941_s1>;
+		vdd_l5_l7-supply = <&pm8941_s2>;
+		vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+		vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+		vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+		vdd_l21-supply = <&vreg_boost>;
+
+		pm8941_s1: s1 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_s2: s2 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+			regulator-boot-on;
+		};
+
+		pm8941_s3: s3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_s4: s4 {
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+		};
+
+		pm8941_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8941_l3: l3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8941_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8941_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8941_l11: l11 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8941_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l15: l15 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8941_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8941_l17: l17 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8941_l18: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8941_l19: l19 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8941_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+			regulator-boot-on;
+		};
+
+		pm8941_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8941_l23: l23 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8941_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+			regulator-boot-on;
+		};
+
+		pm8941_lvs3: lvs3 {};
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	vmmc-supply = <&pm8941_l20>;
+	vqmmc-supply = <&pm8941_s3>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_on>;
+	pinctrl-1 = <&sdc1_off>;
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	vmmc-supply = <&pm8941_l21>;
+	vqmmc-supply = <&pm8941_l13>;
+
+	cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_on>;
+	pinctrl-1 = <&sdc2_off>;
+};
+
+&smbb {
+	qcom,fast-charge-safe-current = <1500000>;
+	qcom,fast-charge-current-limit = <1500000>;
+	qcom,dc-current-limit = <1800000>;
+	qcom,fast-charge-safe-voltage = <4400000>;
+	qcom,fast-charge-high-threshold-voltage = <4350000>;
+	qcom,fast-charge-low-threshold-voltage = <3400000>;
+	qcom,auto-recharge-threshold-voltage = <4200000>;
+	qcom,minimum-input-voltage = <4300000>;
+};
+
+&tlmm {
+	ts_int_pin: touch-int {
+		pins = "gpio61";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		input-enable;
+	};
+
+	sdc1_on: sdc1-on {
+		clk {
+			pins = "sdc1_clk";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		cmd-data {
+			pins = "sdc1_cmd", "sdc1_data";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+	};
+
+	sdc2_on: sdc-on {
+		clk {
+			pins = "sdc2_clk";
+			drive-strength = <10>;
+			bias-disable;
+		};
+
+		cmd-data {
+			pins = "sdc2_cmd", "sdc2_data";
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+
+		cd {
+			pins = "gpio62";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 412d94736c35..7a9be0acf3f5 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -12,61 +12,19 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
-	model = "Qualcomm MSM8974";
-	compatible = "qcom,msm8974";
 	interrupt-parent = <&intc>;
 
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		mpss_region: mpss@8000000 {
-			reg = <0x08000000 0x5100000>;
-			no-map;
-		};
-
-		mba_region: mba@d100000 {
-			reg = <0x0d100000 0x100000>;
-			no-map;
-		};
-
-		wcnss_region: wcnss@d200000 {
-			reg = <0x0d200000 0xa00000>;
-			no-map;
-		};
-
-		adsp_region: adsp@dc00000 {
-			reg = <0x0dc00000 0x1900000>;
-			no-map;
-		};
-
-		venus@f500000 {
-			reg = <0x0f500000 0x500000>;
-			no-map;
-		};
-
-		smem_region: smem@fa00000 {
-			reg = <0xfa00000 0x200000>;
-			no-map;
-		};
-
-		tz@fc00000 {
-			reg = <0x0fc00000 0x160000>;
-			no-map;
-		};
-
-		rfsa@fd60000 {
-			reg = <0x0fd60000 0x20000>;
-			no-map;
+	clocks {
+		xo_board: xo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
 		};
 
-		rmtfs@fd80000 {
-			compatible = "qcom,rmtfs-mem";
-			reg = <0x0fd80000 0x180000>;
-			no-map;
-
-			qcom,client-id = <1>;
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
 		};
 	};
 
@@ -136,238 +94,75 @@
 		};
 	};
 
+	firmware {
+		scm {
+			compatible = "qcom,scm-msm8974", "qcom,scm";
+			clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
+			clock-names = "core", "bus", "iface";
+		};
+	};
+
 	memory {
 		device_type = "memory";
 		reg = <0x0 0x0>;
 	};
 
-	thermal-zones {
-		cpu0-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 5>;
-
-			trips {
-				cpu_alert0: trip0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu_crit0: trip1 {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu1-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 6>;
-
-			trips {
-				cpu_alert1: trip0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu_crit1: trip1 {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu2-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 7>;
-
-			trips {
-				cpu_alert2: trip0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu_crit2: trip1 {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu3-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 8>;
-
-			trips {
-				cpu_alert3: trip0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu_crit3: trip1 {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		q6-dsp-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+	pmu {
+		compatible = "qcom,krait-pmu";
+		interrupts = <GIC_PPI 7 0xf04>;
+	};
 
-			thermal-sensors = <&tsens 1>;
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
 
-			trips {
-				q6_dsp_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
+		mpss_region: mpss@8000000 {
+			reg = <0x08000000 0x5100000>;
+			no-map;
 		};
 
-		modemtx-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 2>;
-
-			trips {
-				modemtx_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
+		mba_region: mba@d100000 {
+			reg = <0x0d100000 0x100000>;
+			no-map;
 		};
 
-		video-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 3>;
-
-			trips {
-				video_alert0: trip-point0 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
+		wcnss_region: wcnss@d200000 {
+			reg = <0x0d200000 0xa00000>;
+			no-map;
 		};
 
-		wlan-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 4>;
-
-			trips {
-				wlan_alert0: trip-point0 {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
+		adsp_region: adsp@dc00000 {
+			reg = <0x0dc00000 0x1900000>;
+			no-map;
 		};
 
-		gpu-top-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 9>;
-
-			trips {
-				gpu1_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
+		venus_region: memory@f500000 {
+			reg = <0x0f500000 0x500000>;
+			no-map;
 		};
 
-		gpu-bottom-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 10>;
-
-			trips {
-				gpu2_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
+		smem_region: smem@fa00000 {
+			reg = <0xfa00000 0x200000>;
+			no-map;
 		};
-	};
-
-	cpu-pmu {
-		compatible = "qcom,krait-pmu";
-		interrupts = <GIC_PPI 7 0xf04>;
-	};
 
-	clocks {
-		xo_board: xo_board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <19200000>;
+		tz_region: memory@fc00000 {
+			reg = <0x0fc00000 0x160000>;
+			no-map;
 		};
 
-		sleep_clk: sleep_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
+		rfsa_mem: memory@fd60000 {
+			reg = <0x0fd60000 0x20000>;
+			no-map;
 		};
-	};
 
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 2 0xf08>,
-			     <GIC_PPI 3 0xf08>,
-			     <GIC_PPI 4 0xf08>,
-			     <GIC_PPI 1 0xf08>;
-		clock-frequency = <19200000>;
-	};
-
-	adsp-pil {
-		compatible = "qcom,msm8974-adsp-pil";
-
-		interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
-				      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
-				      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
-				      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
-				      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
-		interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
-
-		cx-supply = <&pm8841_s2>;
-
-		clocks = <&xo_board>;
-		clock-names = "xo";
-
-		memory-region = <&adsp_region>;
-
-		qcom,smem-states = <&adsp_smp2p_out 0>;
-		qcom,smem-state-names = "stop";
-
-		smd-edge {
-			interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
-
-			qcom,ipc = <&apcs 8 8>;
-			qcom,smd-edge = <1>;
+		rmtfs@fd80000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0fd80000 0x180000>;
+			no-map;
 
-			label = "lpass";
+			qcom,client-id = <1>;
 		};
 	};
 
@@ -497,11 +292,23 @@
 		};
 	};
 
-	firmware {
-		scm {
-			compatible = "qcom,scm";
-			clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
-			clock-names = "core", "bus", "iface";
+	smd {
+		compatible = "qcom,smd";
+
+		rpm {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests: rpm_requests {
+				compatible = "qcom,rpm-msm8974";
+				qcom,smd-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc";
+					#clock-cells = <1>;
+				};
+			};
 		};
 	};
 
@@ -524,31 +331,6 @@
 			reg = <0xf9011000 0x1000>;
 		};
 
-		qfprom: qfprom@fc4bc000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "qcom,qfprom";
-			reg = <0xfc4bc000 0x1000>;
-			tsens_calib: calib@d0 {
-				reg = <0xd0 0x18>;
-			};
-			tsens_backup: backup@440 {
-				reg = <0x440 0x10>;
-			};
-		};
-
-		tsens: thermal-sensor@fc4a9000 {
-			compatible = "qcom,msm8974-tsens";
-			reg = <0xfc4a9000 0x1000>, /* TM */
-			      <0xfc4a8000 0x1000>; /* SROT */
-			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
-			nvmem-cell-names = "calib", "calib_backup";
-			#qcom,sensors = <11>;
-			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "uplow";
-			#thermal-sensor-cells = <1>;
-		};
-
 		timer@f9020000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -654,47 +436,59 @@
 			reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
 		};
 
-		restart@fc4ab000 {
-			compatible = "qcom,pshold";
-			reg = <0xfc4ab000 0x4>;
-		};
+		sdhc_1: mmc@f9824900 {
+			compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
+			reg-names = "hc", "core";
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+			bus-width = <8>;
+			non-removable;
 
-		gcc: clock-controller@fc400000 {
-			compatible = "qcom,gcc-msm8974";
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-			reg = <0xfc400000 0x4000>;
+			status = "disabled";
 		};
 
-		tcsr: syscon@fd4a0000 {
-			compatible = "syscon";
-			reg = <0xfd4a0000 0x10000>;
-		};
+		sdhc_3: mmc@f9864900 {
+			compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
+			reg-names = "hc", "core";
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC3_AHB_CLK>,
+				 <&gcc GCC_SDCC3_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+			bus-width = <4>;
 
-		tcsr_mutex_block: syscon@fd484000 {
-			compatible = "syscon";
-			reg = <0xfd484000 0x2000>;
-		};
+			#address-cells = <1>;
+			#size-cells = <0>;
 
-		mmcc: clock-controller@fd8c0000 {
-			compatible = "qcom,mmcc-msm8974";
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-			reg = <0xfd8c0000 0x6000>;
+			status = "disabled";
 		};
 
-		tcsr_mutex: tcsr-mutex {
-			compatible = "qcom,tcsr-mutex";
-			syscon = <&tcsr_mutex_block 0 0x80>;
+		sdhc_2: mmc@f98a4900 {
+			compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
+			reg-names = "hc", "core";
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+			bus-width = <4>;
 
-			#hwlock-cells = <1>;
-		};
+			#address-cells = <1>;
+			#size-cells = <0>;
 
-		rpm_msg_ram: memory@fc428000 {
-			compatible = "qcom,rpm-msg-ram";
-			reg = <0xfc428000 0x4000>;
+			status = "disabled";
 		};
 
 		blsp1_uart1: serial@f991d000 {
@@ -712,19 +506,90 @@
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_uart2_default>;
+			status = "disabled";
+		};
+
+		blsp1_i2c1: i2c@f9923000 {
+			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9923000 0x1000>;
+			interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c1_default>;
+			pinctrl-1 = <&blsp1_i2c1_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp1_i2c2: i2c@f9924000 {
+			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9924000 0x1000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c2_default>;
+			pinctrl-1 = <&blsp1_i2c2_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp1_i2c3: i2c@f9925000 {
+			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9925000 0x1000>;
+			interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c3_default>;
+			pinctrl-1 = <&blsp1_i2c3_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp1_i2c6: i2c@f9928000 {
 			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9928000 0x1000>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c6_default>;
+			pinctrl-1 = <&blsp1_i2c6_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
-		blsp2_uart7: serial@f995d000 {
+		blsp2_dma: dma-controller@f9944000 {
+			compatible = "qcom,bam-v1.4.0";
+			reg = <0xf9944000 0x19000>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		blsp2_uart1: serial@f995d000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0xf995d000 0x1000>;
-			interrupts = <GIC_SPI 113 IRQ_TYPE_NONE>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
 			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_uart1_default>;
+			pinctrl-1 = <&blsp2_uart1_sleep>;
 			status = "disabled";
 		};
 
-		blsp2_uart8: serial@f995e000 {
+		blsp2_uart2: serial@f995e000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0xf995e000 0x1000>;
 			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
@@ -733,55 +598,59 @@
 			status = "disabled";
 		};
 
-		blsp2_uart10: serial@f9960000 {
+		blsp2_uart4: serial@f9960000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0xf9960000 0x1000>;
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP2_UART4_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
 			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp2_uart4_default>;
 			status = "disabled";
 		};
 
-		sdhci@f9824900 {
-			compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
-			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
-			reg-names = "hc_mem", "core_mem";
-			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
-				 <&gcc GCC_SDCC1_AHB_CLK>,
-				 <&xo_board>;
-			clock-names = "core", "iface", "xo";
+		blsp2_i2c2: i2c@f9964000 {
 			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9964000 0x1000>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c2_default>;
+			pinctrl-1 = <&blsp2_i2c2_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
-		sdhci@f9864900 {
-			compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
-			reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
-			reg-names = "hc_mem", "core_mem";
-			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC3_APPS_CLK>,
-				 <&gcc GCC_SDCC3_AHB_CLK>,
-				 <&xo_board>;
-			clock-names = "core", "iface", "xo";
+		blsp2_i2c5: i2c@f9967000 {
 			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9967000 0x1000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c5_default>;
+			pinctrl-1 = <&blsp2_i2c5_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
-		sdhci@f98a4900 {
-			compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
-			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
-			reg-names = "hc_mem", "core_mem";
-			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
-				 <&gcc GCC_SDCC2_AHB_CLK>,
-				 <&xo_board>;
-			clock-names = "core", "iface", "xo";
+		blsp2_i2c6: i2c@f9968000 {
 			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9968000 0x1000>;
+			interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c6_default>;
+			pinctrl-1 = <&blsp2_i2c6_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		otg: usb@f9a55000 {
@@ -835,55 +704,6 @@
 			clock-names = "core";
 		};
 
-		remoteproc@fc880000 {
-			compatible = "qcom,msm8974-mss-pil";
-			reg = <0xfc880000 0x100>, <0xfc820000 0x020>;
-			reg-names = "qdsp6", "rmb";
-
-			interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
-
-			clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
-				 <&gcc GCC_MSS_CFG_AHB_CLK>,
-				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
-				 <&xo_board>;
-			clock-names = "iface", "bus", "mem", "xo";
-
-			resets = <&gcc GCC_MSS_RESTART>;
-			reset-names = "mss_restart";
-
-			cx-supply = <&pm8841_s2>;
-			mss-supply = <&pm8841_s3>;
-			mx-supply = <&pm8841_s1>;
-			pll-supply = <&pm8941_l12>;
-
-			qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>;
-
-			qcom,smem-states = <&modem_smp2p_out 0>;
-			qcom,smem-state-names = "stop";
-
-			mba {
-				memory-region = <&mba_region>;
-			};
-
-			mpss {
-				memory-region = <&mpss_region>;
-			};
-
-			smd-edge {
-				interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
-
-				qcom,ipc = <&apcs 8 12>;
-				qcom,smd-edge = <0>;
-
-				label = "modem";
-			};
-		};
-
 		pronto: remoteproc@fb21b000 {
 			compatible = "qcom,pronto-v2-pil", "qcom,pronto";
 			reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>;
@@ -898,8 +718,6 @@
 					      <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
 
-			vddpx-supply = <&pm8941_s3>;
-
 			qcom,smem-states = <&wcnss_smp2p_out 0>;
 			qcom,smem-state-names = "stop";
 
@@ -910,11 +728,6 @@
 
 				clocks = <&rpmcc RPM_SMD_CXO_A2>;
 				clock-names = "xo";
-
-				vddxo-supply = <&pm8941_l6>;
-				vddrfa-supply = <&pm8941_l11>;
-				vddpa-supply = <&pm8941_l19>;
-				vdddig-supply = <&pm8941_s3>;
 			};
 
 			smd-edge {
@@ -942,139 +755,37 @@
 						interrupt-names = "tx", "rx";
 
 						qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
-						qcom,smem-state-names = "tx-enable", "tx-rings-empty";
+						qcom,smem-state-names = "tx-enable",
+									"tx-rings-empty";
 					};
 				};
 			};
 		};
 
-		msmgpio: pinctrl@fd510000 {
-			compatible = "qcom,msm8974-pinctrl";
-			reg = <0xfd510000 0x4000>;
-			gpio-controller;
-			gpio-ranges = <&msmgpio 0 0 146>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		i2c@f9923000 {
-			status = "disabled";
-			compatible = "qcom,i2c-qup-v2.1.1";
-			reg = <0xf9923000 0x1000>;
-			interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c@f9924000 {
-			status = "disabled";
-			compatible = "qcom,i2c-qup-v2.1.1";
-			reg = <0xf9924000 0x1000>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		blsp_i2c3: i2c@f9925000 {
-			status = "disabled";
-			compatible = "qcom,i2c-qup-v2.1.1";
-			reg = <0xf9925000 0x1000>;
-			interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		blsp_i2c6: i2c@f9928000 {
-			status = "disabled";
-			compatible = "qcom,i2c-qup-v2.1.1";
-			reg = <0xf9928000 0x1000>;
-			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		blsp_i2c8: i2c@f9964000 {
-			status = "disabled";
-			compatible = "qcom,i2c-qup-v2.1.1";
-			reg = <0xf9964000 0x1000>;
-			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
-			clock-names = "core", "iface";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		blsp_i2c11: i2c@f9967000 {
-			status = "disabled";
-			compatible = "qcom,i2c-qup-v2.1.1";
-			reg = <0xf9967000 0x1000>;
-			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
-			clock-names = "core", "iface";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
-			dma-names = "tx", "rx";
-		};
-
-		blsp_i2c12: i2c@f9968000 {
-			status = "disabled";
-			compatible = "qcom,i2c-qup-v2.1.1";
-			reg = <0xf9968000 0x1000>;
-			interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
-			clock-names = "core", "iface";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		spmi_bus: spmi@fc4cf000 {
-			compatible = "qcom,spmi-pmic-arb";
-			reg-names = "core", "intr", "cnfg";
-			reg = <0xfc4cf000 0x1000>,
-			      <0xfc4cb000 0x1000>,
-			      <0xfc4ca000 0x1000>;
-			interrupt-names = "periph_irq";
-			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,ee = <0>;
-			qcom,channel = <0>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-			interrupt-controller;
-			#interrupt-cells = <4>;
-		};
-
-		blsp2_dma: dma-controller@f9944000 {
-			compatible = "qcom,bam-v1.4.0";
-			reg = <0xf9944000 0x19000>;
-			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
+		sram@fc190000 {
+			compatible = "qcom,msm8974-rpm-stats";
+			reg = <0xfc190000 0x10000>;
 		};
 
-		etr@fc322000 {
+		etf@fc307000 {
 			compatible = "arm,coresight-tmc", "arm,primecell";
-			reg = <0xfc322000 0x1000>;
+			reg = <0xfc307000 0x1000>;
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
 
+			out-ports {
+				port {
+					etf_out: endpoint {
+						remote-endpoint = <&replicator_in>;
+					};
+				};
+			};
+
 			in-ports {
 				port {
-					etr_in: endpoint {
-						remote-endpoint = <&replicator_out0>;
+					etf_in: endpoint {
+						remote-endpoint = <&merger_out>;
 					};
 				};
 			};
@@ -1096,59 +807,39 @@
 			};
 		};
 
-		replicator@fc31c000 {
-			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
-			reg = <0xfc31c000 0x1000>;
+		funnel@fc31a000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0xfc31a000 0x1000>;
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
 
-			out-ports {
+			in-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@0 {
-					reg = <0>;
-					replicator_out0: endpoint {
-						remote-endpoint = <&etr_in>;
-					};
-				};
-				port@1 {
-					reg = <1>;
-					replicator_out1: endpoint {
-						remote-endpoint = <&tpiu_in>;
-					};
-				};
-			};
-
-			in-ports {
-				port {
-					replicator_in: endpoint {
-						remote-endpoint = <&etf_out>;
+				/*
+				 * Not described input ports:
+				 * 0 - not-connected
+				 * 1 - connected trought funnel to Multimedia CPU
+				 * 2 - connected to Wireless CPU
+				 * 3 - not-connected
+				 * 4 - not-connected
+				 * 6 - not-connected
+				 * 7 - connected to STM
+				 */
+				port@5 {
+					reg = <5>;
+					funnel1_in5: endpoint {
+						remote-endpoint = <&kpss_out>;
 					};
 				};
 			};
-		};
-
-		etf@fc307000 {
-			compatible = "arm,coresight-tmc", "arm,primecell";
-			reg = <0xfc307000 0x1000>;
-
-			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
 
 			out-ports {
 				port {
-					etf_out: endpoint {
-						remote-endpoint = <&replicator_in>;
-					};
-				};
-			};
-
-			in-ports {
-				port {
-					etf_in: endpoint {
-						remote-endpoint = <&merger_out>;
+					funnel1_out: endpoint {
+						remote-endpoint = <&merger_in1>;
 					};
 				};
 			};
@@ -1188,85 +879,51 @@
 			};
 		};
 
-		funnel@fc31a000 {
-			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0xfc31a000 0x1000>;
+		replicator@fc31c000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0xfc31c000 0x1000>;
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
 
-			in-ports {
+			out-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				/*
-				 * Not described input ports:
-				 * 0 - not-connected
-				 * 1 - connected trought funnel to Multimedia CPU
-				 * 2 - connected to Wireless CPU
-				 * 3 - not-connected
-				 * 4 - not-connected
-				 * 6 - not-connected
-				 * 7 - connected to STM
-				 */
-				port@5 {
-					reg = <5>;
-					funnel1_in5: endpoint {
-						remote-endpoint = <&kpss_out>;
+				port@0 {
+					reg = <0>;
+					replicator_out0: endpoint {
+						remote-endpoint = <&etr_in>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					replicator_out1: endpoint {
+						remote-endpoint = <&tpiu_in>;
 					};
 				};
 			};
 
-			out-ports {
+			in-ports {
 				port {
-					funnel1_out: endpoint {
-						remote-endpoint = <&merger_in1>;
+					replicator_in: endpoint {
+						remote-endpoint = <&etf_out>;
 					};
 				};
 			};
 		};
 
-		funnel@fc345000 { /* KPSS funnel only 4 inputs are used */
-			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0xfc345000 0x1000>;
+		etr@fc322000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0xfc322000 0x1000>;
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
 
 			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					kpss_in0: endpoint {
-						remote-endpoint = <&etm0_out>;
-					};
-				};
-				port@1 {
-					reg = <1>;
-					kpss_in1: endpoint {
-						remote-endpoint = <&etm1_out>;
-					};
-				};
-				port@2 {
-					reg = <2>;
-					kpss_in2: endpoint {
-						remote-endpoint = <&etm2_out>;
-					};
-				};
-				port@3 {
-					reg = <3>;
-					kpss_in3: endpoint {
-						remote-endpoint = <&etm3_out>;
-					};
-				};
-			};
-
-			out-ports {
 				port {
-					kpss_out: endpoint {
-						remote-endpoint = <&funnel1_in5>;
+					etr_in: endpoint {
+						remote-endpoint = <&replicator_out0>;
 					};
 				};
 			};
@@ -1344,25 +1001,66 @@
 			};
 		};
 
-		ocmem@fdd00000 {
-			compatible = "qcom,msm8974-ocmem";
-			reg = <0xfdd00000 0x2000>,
-			      <0xfec00000 0x180000>;
-			reg-names = "ctrl",
-			            "mem";
-			clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
-			         <&mmcc OCMEMCX_OCMEMNOC_CLK>;
-			clock-names = "core",
-			              "iface";
+		/* KPSS funnel, only 4 inputs are used */
+		funnel@fc345000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0xfc345000 0x1000>;
 
-			#address-cells = <1>;
-			#size-cells = <1>;
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
 
-			gmu_sram: gmu-sram@0 {
-				reg = <0x0 0x100000>;
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					kpss_in0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					kpss_in1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+				port@2 {
+					reg = <2>;
+					kpss_in2: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+				port@3 {
+					reg = <3>;
+					kpss_in3: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					kpss_out: endpoint {
+						remote-endpoint = <&funnel1_in5>;
+					};
+				};
 			};
 		};
 
+		gcc: clock-controller@fc400000 {
+			compatible = "qcom,gcc-msm8974";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0xfc400000 0x4000>;
+		};
+
+		rpm_msg_ram: memory@fc428000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0xfc428000 0x4000>;
+		};
+
 		bimc: interconnect@fc380000 {
 			reg = <0xfc380000 0x6a000>;
 			compatible = "qcom,msm8974-bimc";
@@ -1417,94 +1115,418 @@
 			         <&rpmcc RPM_SMD_CNOC_A_CLK>;
 		};
 
-		gpu: adreno@fdb00000 {
+		tsens: thermal-sensor@fc4a9000 {
+			compatible = "qcom,msm8974-tsens";
+			reg = <0xfc4a9000 0x1000>, /* TM */
+			      <0xfc4a8000 0x1000>; /* SROT */
+			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+			nvmem-cell-names = "calib", "calib_backup";
+			#qcom,sensors = <11>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
+			#thermal-sensor-cells = <1>;
+		};
+
+		restart@fc4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0xfc4ab000 0x4>;
+		};
+
+		qfprom: qfprom@fc4bc000 {
+			compatible = "qcom,msm8974-qfprom", "qcom,qfprom";
+			reg = <0xfc4bc000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			tsens_calib: calib@d0 {
+				reg = <0xd0 0x18>;
+			};
+			tsens_backup: backup@440 {
+				reg = <0x440 0x10>;
+			};
+		};
+
+		spmi_bus: spmi@fc4cf000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg-names = "core", "intr", "cnfg";
+			reg = <0xfc4cf000 0x1000>,
+			      <0xfc4cb000 0x1000>,
+			      <0xfc4ca000 0x1000>;
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		bam_dmux_dma: dma-controller@fc834000 {
+			compatible = "qcom,bam-v1.4.0";
+			reg = <0xfc834000 0x7000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+
+			num-channels = <6>;
+			qcom,num-ees = <1>;
+			qcom,powered-remotely;
+		};
+
+		remoteproc_mss: remoteproc@fc880000 {
+			compatible = "qcom,msm8974-mss-pil";
+			reg = <0xfc880000 0x100>, <0xfc820000 0x020>;
+			reg-names = "qdsp6", "rmb";
+
+			interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+			clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
+				 <&gcc GCC_MSS_CFG_AHB_CLK>,
+				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "bus", "mem", "xo";
+
+			resets = <&gcc GCC_MSS_RESTART>;
+			reset-names = "mss_restart";
+
+			qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>;
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
 			status = "disabled";
 
-			compatible = "qcom,adreno-330.1",
-				     "qcom,adreno";
-			reg = <0xfdb00000 0x10000>;
-			reg-names = "kgsl_3d0_reg_memory";
-			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "kgsl_3d0_irq";
-			clock-names = "core",
-				      "iface",
-				      "mem_iface";
-			clocks = <&mmcc OXILI_GFX3D_CLK>,
-				 <&mmcc OXILICX_AHB_CLK>,
-				 <&mmcc OXILICX_AXI_CLK>;
-			sram = <&gmu_sram>;
-			power-domains = <&mmcc OXILICX_GDSC>;
-			operating-points-v2 = <&gpu_opp_table>;
+			mba {
+				memory-region = <&mba_region>;
+			};
 
-			interconnects = <&mmssnoc MNOC_MAS_GRAPHICS_3D &bimc BIMC_SLV_EBI_CH0>,
-					<&ocmemnoc OCMEM_VNOC_MAS_GFX3D &ocmemnoc OCMEM_SLV_OCMEM>;
-			interconnect-names = "gfx-mem",
-					     "ocmem";
+			mpss {
+				memory-region = <&mpss_region>;
+			};
 
-			// iommus = <&gpu_iommu 0>;
+			bam_dmux: bam-dmux {
+				compatible = "qcom,bam-dmux";
 
-			gpu_opp_table: opp_table {
-				compatible = "operating-points-v2";
+				interrupt-parent = <&modem_smsm>;
+				interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>;
+				interrupt-names = "pc", "pc-ack";
 
-				opp-320000000 {
-					opp-hz = /bits/ 64 <320000000>;
+				qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>;
+				qcom,smem-state-names = "pc", "pc-ack";
+
+				dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>;
+				dma-names = "tx", "rx";
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,ipc = <&apcs 8 12>;
+				qcom,smd-edge = <0>;
+
+				label = "modem";
+			};
+		};
+
+		tcsr_mutex_block: syscon@fd484000 {
+			compatible = "syscon";
+			reg = <0xfd484000 0x2000>;
+		};
+
+		tcsr: syscon@fd4a0000 {
+			compatible = "syscon";
+			reg = <0xfd4a0000 0x10000>;
+		};
+
+		tlmm: pinctrl@fd510000 {
+			compatible = "qcom,msm8974-pinctrl";
+			reg = <0xfd510000 0x4000>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 146>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+			sdc1_off: sdc1-off {
+				clk {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <2>;
 				};
 
-				opp-200000000 {
-					opp-hz = /bits/ 64 <200000000>;
+				cmd {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
 				};
 
-				opp-27000000 {
-					opp-hz = /bits/ 64 <27000000>;
+				data {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+			};
+
+			sdc2_off: sdc2-off {
+				clk {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				cd {
+					pins = "gpio54";
+					bias-disable;
+					drive-strength = <2>;
+				};
+			};
+
+			blsp1_uart2_default: blsp1-uart2-default {
+				rx {
+					pins = "gpio5";
+					function = "blsp_uart2";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				tx {
+					pins = "gpio4";
+					function = "blsp_uart2";
+					drive-strength = <4>;
+					bias-disable;
+				};
+			};
+
+			blsp2_uart1_default: blsp2-uart1-default {
+				tx-rts {
+					pins = "gpio41", "gpio44";
+					function = "blsp_uart7";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				rx-cts {
+					pins = "gpio42", "gpio43";
+					function = "blsp_uart7";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			blsp2_uart1_sleep: blsp2-uart1-sleep {
+				pins = "gpio41", "gpio42", "gpio43", "gpio44";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp2_uart4_default: blsp2-uart4-default {
+				tx-rts {
+					pins = "gpio53", "gpio56";
+					function = "blsp_uart10";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				rx-cts {
+					pins = "gpio54", "gpio55";
+					function = "blsp_uart10";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			blsp1_i2c1_default: blsp1-i2c1-default {
+				pins = "gpio2", "gpio3";
+				function = "blsp_i2c1";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c1_sleep: blsp1-i2c1-sleep {
+				pins = "gpio2", "gpio3";
+				function = "blsp_i2c1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			blsp1_i2c2_default: blsp1-i2c2-default {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c2_sleep: blsp1-i2c2-sleep {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			blsp1_i2c3_default: blsp1-i2c3-default {
+				pins = "gpio10", "gpio11";
+				function = "blsp_i2c3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c3_sleep: blsp1-i2c3-sleep {
+				pins = "gpio10", "gpio11";
+				function = "blsp_i2c3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			/* BLSP1_I2C4 info is missing */
+
+			/* BLSP1_I2C5 info is missing */
+
+			blsp1_i2c6_default: blsp1-i2c6-default {
+				pins = "gpio29", "gpio30";
+				function = "blsp_i2c6";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c6_sleep: blsp1-i2c6-sleep {
+				pins = "gpio29", "gpio30";
+				function = "blsp_i2c6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+			/* 6 interfaces per QUP, BLSP2 indexes are numbered (n)+6 */
+
+			/* BLSP2_I2C1 info is missing */
+
+			blsp2_i2c2_default: blsp2-i2c2-default {
+				pins = "gpio47", "gpio48";
+				function = "blsp_i2c8";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c2_sleep: blsp2-i2c2-sleep {
+				pins = "gpio47", "gpio48";
+				function = "blsp_i2c8";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			/* BLSP2_I2C3 info is missing */
+
+			/* BLSP2_I2C4 info is missing */
+
+			blsp2_i2c5_default: blsp2-i2c5-default {
+				pins = "gpio83", "gpio84";
+				function = "blsp_i2c11";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c5_sleep: blsp2-i2c5-sleep {
+				pins = "gpio83", "gpio84";
+				function = "blsp_i2c11";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			blsp2_i2c6_default: blsp2-i2c6-default {
+				pins = "gpio87", "gpio88";
+				function = "blsp_i2c12";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c6_sleep: blsp2-i2c6-sleep {
+				pins = "gpio87", "gpio88";
+				function = "blsp_i2c12";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			spi8_default: spi8_default {
+				mosi {
+					pins = "gpio45";
+					function = "blsp_spi8";
+				};
+				miso {
+					pins = "gpio46";
+					function = "blsp_spi8";
+				};
+				cs {
+					pins = "gpio47";
+					function = "blsp_spi8";
+				};
+				clk {
+					pins = "gpio48";
+					function = "blsp_spi8";
 				};
 			};
 		};
 
-		mdss: mdss@fd900000 {
-			status = "disabled";
+		mmcc: clock-controller@fd8c0000 {
+			compatible = "qcom,mmcc-msm8974";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0xfd8c0000 0x6000>;
+		};
 
+		mdss: mdss@fd900000 {
 			compatible = "qcom,mdss";
-			reg = <0xfd900000 0x100>,
-			      <0xfd924000 0x1000>;
-			reg-names = "mdss_phys",
-			            "vbif_phys";
+			reg = <0xfd900000 0x100>, <0xfd924000 0x1000>;
+			reg-names = "mdss_phys", "vbif_phys";
 
 			power-domains = <&mmcc MDSS_GDSC>;
 
 			clocks = <&mmcc MDSS_AHB_CLK>,
-			         <&mmcc MDSS_AXI_CLK>,
-			         <&mmcc MDSS_VSYNC_CLK>;
-			clock-names = "iface",
-			              "bus",
-			              "vsync";
+				 <&mmcc MDSS_AXI_CLK>,
+				 <&mmcc MDSS_VSYNC_CLK>;
+			clock-names = "iface", "bus", "vsync";
 
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
+			status = "disabled";
+
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
 
 			mdp: mdp@fd900000 {
-				status = "disabled";
-
 				compatible = "qcom,mdp5";
 				reg = <0xfd900100 0x22000>;
 				reg-names = "mdp_phys";
 
 				interrupt-parent = <&mdss>;
-				interrupts = <0 0>;
+				interrupts = <0>;
 
 				clocks = <&mmcc MDSS_AHB_CLK>,
 					 <&mmcc MDSS_AXI_CLK>,
 					 <&mmcc MDSS_MDP_CLK>,
 					 <&mmcc MDSS_VSYNC_CLK>;
-				clock-names = "iface",
-				              "bus",
-				              "core",
-				              "vsync";
+				clock-names = "iface", "bus", "core", "vsync";
 
 				interconnects = <&mmssnoc MNOC_MAS_MDP_PORT0 &bimc BIMC_SLV_EBI_CH0>;
 				interconnect-names = "mdp0-mem";
@@ -1523,38 +1545,39 @@
 			};
 
 			dsi0: dsi@fd922800 {
-				status = "disabled";
-
 				compatible = "qcom,mdss-dsi-ctrl";
 				reg = <0xfd922800 0x1f8>;
 				reg-names = "dsi_ctrl";
 
 				interrupt-parent = <&mdss>;
-				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <4>;
 
-				assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
-				                  <&mmcc PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&dsi_phy0 0>,
-				                         <&dsi_phy0 1>;
+				assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
 
 				clocks = <&mmcc MDSS_MDP_CLK>,
-				         <&mmcc MDSS_AHB_CLK>,
-				         <&mmcc MDSS_AXI_CLK>,
-				         <&mmcc MDSS_BYTE0_CLK>,
-				         <&mmcc MDSS_PCLK0_CLK>,
-				         <&mmcc MDSS_ESC0_CLK>,
-				         <&mmcc MMSS_MISC_AHB_CLK>;
+					 <&mmcc MDSS_AHB_CLK>,
+					 <&mmcc MDSS_AXI_CLK>,
+					 <&mmcc MDSS_BYTE0_CLK>,
+					 <&mmcc MDSS_PCLK0_CLK>,
+					 <&mmcc MDSS_ESC0_CLK>,
+					 <&mmcc MMSS_MISC_AHB_CLK>;
 				clock-names = "mdp_core",
-				              "iface",
-				              "bus",
-				              "byte",
-				              "pixel",
-				              "core",
-				              "core_mmss";
-
-				phys = <&dsi_phy0>;
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core",
+					      "core_mmss";
+
+				phys = <&dsi0_phy>;
 				phy-names = "dsi-phy";
 
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
 				ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
@@ -1574,29 +1597,119 @@
 				};
 			};
 
-			dsi_phy0: dsi-phy@fd922a00 {
-				status = "disabled";
-
+			dsi0_phy: dsi-phy@fd922a00 {
 				compatible = "qcom,dsi-phy-28nm-hpm";
 				reg = <0xfd922a00 0xd4>,
 				      <0xfd922b00 0x280>,
 				      <0xfd922d80 0x30>;
 				reg-names = "dsi_pll",
-				            "dsi_phy",
-				            "dsi_phy_regulator";
+					    "dsi_phy",
+					    "dsi_phy_regulator";
 
 				#clock-cells = <1>;
 				#phy-cells = <0>;
-				qcom,dsi-phy-index = <0>;
 
 				clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>;
 				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+		};
+
+		gpu: adreno@fdb00000 {
+			compatible = "qcom,adreno-330.1", "qcom,adreno";
+			reg = <0xfdb00000 0x10000>;
+			reg-names = "kgsl_3d0_reg_memory";
+
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "kgsl_3d0_irq";
+
+			clocks = <&mmcc OXILI_GFX3D_CLK>,
+				 <&mmcc OXILICX_AHB_CLK>,
+				 <&mmcc OXILICX_AXI_CLK>;
+			clock-names = "core", "iface", "mem_iface";
+
+			sram = <&gmu_sram>;
+			power-domains = <&mmcc OXILICX_GDSC>;
+			operating-points-v2 = <&gpu_opp_table>;
+
+			interconnects = <&mmssnoc MNOC_MAS_GRAPHICS_3D &bimc BIMC_SLV_EBI_CH0>,
+					<&ocmemnoc OCMEM_VNOC_MAS_GFX3D &ocmemnoc OCMEM_SLV_OCMEM>;
+			interconnect-names = "gfx-mem", "ocmem";
+
+			// iommus = <&gpu_iommu 0>;
+
+			status = "disabled";
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-320000000 {
+					opp-hz = /bits/ 64 <320000000>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+				};
+
+				opp-27000000 {
+					opp-hz = /bits/ 64 <27000000>;
+				};
+			};
+		};
+
+		sram@fdd00000 {
+			compatible = "qcom,msm8974-ocmem";
+			reg = <0xfdd00000 0x2000>,
+			      <0xfec00000 0x180000>;
+			reg-names = "ctrl", "mem";
+			ranges = <0 0xfec00000 0x180000>;
+			clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
+				 <&mmcc OCMEMCX_OCMEMNOC_CLK>;
+			clock-names = "core", "iface";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			gmu_sram: gmu-sram@0 {
+				reg = <0x0 0x100000>;
 			};
 		};
 
-		imem@fe805000 {
+		remoteproc_adsp: remoteproc@fe200000 {
+			compatible = "qcom,msm8974-adsp-pil";
+			reg = <0xfe200000 0x100>;
+
+			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+					       <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					       <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					       <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					       <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+			clocks = <&xo_board>;
+			clock-names = "xo";
+
+			memory-region = <&adsp_region>;
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
 			status = "disabled";
-			compatible = "syscon", "simple-mfd";
+
+			smd-edge {
+				interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,ipc = <&apcs 8 8>;
+				qcom,smd-edge = <1>;
+				label = "lpass";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		imem: sram@fe805000 {
+			compatible = "qcom,msm8974-imem", "syscon", "simple-mfd";
 			reg = <0xfe805000 0x1000>;
 
 			reboot-mode {
@@ -1606,76 +1719,194 @@
 		};
 	};
 
-	smd {
-		compatible = "qcom,smd";
+	tcsr_mutex: tcsr-mutex {
+		compatible = "qcom,tcsr-mutex";
+		syscon = <&tcsr_mutex_block 0 0x80>;
 
-		rpm {
-			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
-			qcom,ipc = <&apcs 8 0>;
-			qcom,smd-edge = <15>;
+		#hwlock-cells = <1>;
+	};
 
-			rpm_requests {
-				compatible = "qcom,rpm-msm8974";
-				qcom,smd-channels = "rpm_requests";
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
 
-				rpmcc: clock-controller {
-					compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc";
-					#clock-cells = <1>;
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit0: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 6>;
+
+			trips {
+				cpu_alert1: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit1: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 7>;
+
+			trips {
+				cpu_alert2: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit2: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 8>;
+
+			trips {
+				cpu_alert3: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit3: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		q6-dsp-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 1>;
+
+			trips {
+				q6_dsp_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		modemtx-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 2>;
+
+			trips {
+				modemtx_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 3>;
+
+			trips {
+				video_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		wlan-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 4>;
+
+			trips {
+				wlan_alert0: trip-point0 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "hot";
 				};
+			};
+		};
+
+		gpu-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
 
-				pm8841-regulators {
-					compatible = "qcom,rpm-pm8841-regulators";
-
-					pm8841_s1: s1 {};
-					pm8841_s2: s2 {};
-					pm8841_s3: s3 {};
-					pm8841_s4: s4 {};
-					pm8841_s5: s5 {};
-					pm8841_s6: s6 {};
-					pm8841_s7: s7 {};
-					pm8841_s8: s8 {};
+			thermal-sensors = <&tsens 9>;
+
+			trips {
+				gpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
 				};
+			};
+		};
 
-				pm8941-regulators {
-					compatible = "qcom,rpm-pm8941-regulators";
-
-					pm8941_s1: s1 {};
-					pm8941_s2: s2 {};
-					pm8941_s3: s3 {};
-
-					pm8941_l1: l1 {};
-					pm8941_l2: l2 {};
-					pm8941_l3: l3 {};
-					pm8941_l4: l4 {};
-					pm8941_l5: l5 {};
-					pm8941_l6: l6 {};
-					pm8941_l7: l7 {};
-					pm8941_l8: l8 {};
-					pm8941_l9: l9 {};
-					pm8941_l10: l10 {};
-					pm8941_l11: l11 {};
-					pm8941_l12: l12 {};
-					pm8941_l13: l13 {};
-					pm8941_l14: l14 {};
-					pm8941_l15: l15 {};
-					pm8941_l16: l16 {};
-					pm8941_l17: l17 {};
-					pm8941_l18: l18 {};
-					pm8941_l19: l19 {};
-					pm8941_l20: l20 {};
-					pm8941_l21: l21 {};
-					pm8941_l22: l22 {};
-					pm8941_l23: l23 {};
-					pm8941_l24: l24 {};
-
-					pm8941_lvs1: lvs1 {};
-					pm8941_lvs2: lvs2 {};
-					pm8941_lvs3: lvs3 {};
+		gpu-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 10>;
+
+			trips {
+				gpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
 				};
 			};
 		};
 	};
 
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 2 0xf08>,
+			     <GIC_PPI 3 0xf08>,
+			     <GIC_PPI 4 0xf08>,
+			     <GIC_PPI 1 0xf08>;
+		clock-frequency = <19200000>;
+	};
+
 	vreg_boost: vreg-boost {
 		compatible = "regulator-fixed";
 
@@ -1692,6 +1923,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&boost_bypass_n_pin>;
 	};
+
 	vreg_vph_pwr: vreg-vph-pwr {
 		compatible = "regulator-fixed";
 		regulator-name = "vph-pwr";
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts
new file mode 100644
index 000000000000..ff6e0066768b
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts
@@ -0,0 +1,464 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974pro.dtsi"
+#include "qcom-pm8841.dtsi"
+#include "qcom-pm8941.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	model = "Fairphone 2";
+	compatible = "fairphone,fp2", "qcom,msm8974";
+
+	aliases {
+		mmc0 = &sdhc_1;
+		mmc1 = &sdhc_2;
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pin_a>;
+
+		key-camera-snapshot {
+			label = "camera_snapshot";
+			gpios = <&pm8941_gpios 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_CAMERA>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		key-volume-down {
+			label = "volume_down";
+			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		key-volume-up {
+			label = "volume_up";
+			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+	};
+
+	vibrator {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+		vcc-supply = <&pm8941_l18>;
+	};
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+
+	touchscreen@41 {
+		compatible = "ilitek,ili2120";
+		reg = <0x41>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&tlmm 55 GPIO_ACTIVE_LOW>;
+
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <1920>;
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&imem {
+	reboot-mode {
+		mode-normal = <0x77665501>;
+		mode-bootloader = <0x77665500>;
+		mode-recovery = <0x77665502>;
+	};
+};
+
+&otg {
+	status = "okay";
+
+	phys = <&usb_hs1_phy>;
+	phy-select = <&tcsr 0xb000 0>;
+	extcon = <&smbb>, <&usb_id>;
+	vbus-supply = <&chg_otg>;
+
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+
+	ulpi {
+		phy@a {
+			status = "okay";
+
+			v1p8-supply = <&pm8941_l6>;
+			v3p3-supply = <&pm8941_l24>;
+
+			extcon = <&smbb>;
+			qcom,init-seq = /bits/ 8 <0x1 0x64>;
+		};
+	};
+};
+
+&pm8941_gpios {
+	gpio_keys_pin_a: gpio-keys-active-state {
+		pins = "gpio1", "gpio2", "gpio5";
+		function = "normal";
+
+		bias-pull-up;
+		power-source = <PM8941_GPIO_S3>;
+	};
+};
+
+&pm8941_lpg {
+	status = "okay";
+
+	qcom,power-source = <1>;
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@7 {
+			reg = <7>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@5 {
+			reg = <5>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+};
+
+&pronto {
+	status = "okay";
+
+	vddmx-supply = <&pm8841_s1>;
+	vddcx-supply = <&pm8841_s2>;
+	vddpx-supply = <&pm8941_s3>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&wcnss_pin_a>;
+
+	iris {
+		vddxo-supply = <&pm8941_l6>;
+		vddrfa-supply = <&pm8941_l11>;
+		vddpa-supply = <&pm8941_l19>;
+		vdddig-supply = <&pm8941_s3>;
+	};
+
+	smd-edge {
+		qcom,remote-pid = <4>;
+		label = "pronto";
+
+		wcnss {
+			status = "okay";
+		};
+	};
+};
+
+&remoteproc_adsp {
+	status = "okay";
+	cx-supply = <&pm8841_s2>;
+};
+
+&remoteproc_mss {
+	status = "okay";
+	cx-supply = <&pm8841_s2>;
+	mss-supply = <&pm8841_s3>;
+	mx-supply = <&pm8841_s1>;
+	pll-supply = <&pm8941_l12>;
+};
+
+&rpm_requests {
+	pm8841-regulators {
+		compatible = "qcom,rpm-pm8841-regulators";
+
+		pm8841_s1: s1 {
+			regulator-min-microvolt = <675000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s2: s2 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s3: s3 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+	};
+
+	pm8941-regulators {
+		compatible = "qcom,rpm-pm8941-regulators";
+
+		vdd_l1_l3-supply = <&pm8941_s1>;
+		vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+		vdd_l4_l11-supply = <&pm8941_s1>;
+		vdd_l5_l7-supply = <&pm8941_s2>;
+		vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+		vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+		vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+		vdd_l21-supply = <&vreg_boost>;
+
+		pm8941_s1: s1 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_s2: s2 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+			regulator-boot-on;
+		};
+
+		pm8941_s3: s3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8941_l3: l3 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8941_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8941_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8941_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8941_l11: l11 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8941_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l15: l15 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8941_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8941_l17: l17 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8941_l18: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8941_l19: l19 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8941_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+			regulator-boot-on;
+		};
+
+		pm8941_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8941_l23: l23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8941_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+			regulator-boot-on;
+		};
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	vmmc-supply = <&pm8941_l20>;
+	vqmmc-supply = <&pm8941_s3>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_on>;
+	pinctrl-1 = <&sdc1_off>;
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	vmmc-supply = <&pm8941_l21>;
+	vqmmc-supply = <&pm8941_l13>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_on>;
+	pinctrl-1 = <&sdc2_off>;
+};
+
+&smbb {
+	usb-charge-current-limit = <1500000>;
+	qcom,fast-charge-safe-current = <1500000>;
+	qcom,fast-charge-current-limit = <1500000>;
+	qcom,fast-charge-safe-voltage = <4380000>;
+	qcom,fast-charge-high-threshold-voltage = <4350000>;
+	qcom,auto-recharge-threshold-voltage = <4240000>;
+	qcom,minimum-input-voltage = <4450000>;
+};
+
+&tlmm {
+	sdc1_on: sdc1-on {
+		clk {
+			pins = "sdc1_clk";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		cmd-data {
+			pins = "sdc1_cmd", "sdc1_data";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+	};
+
+	sdc2_on: sdc2-on {
+		clk {
+			pins = "sdc2_clk";
+			drive-strength = <10>;
+			bias-disable;
+		};
+
+		cmd-data {
+			pins = "sdc2_cmd", "sdc2_data";
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+	};
+
+	wcnss_pin_a: wcnss-pin-active {
+		wlan {
+			pins =  "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
+			function = "wlan";
+
+			drive-strength = <6>;
+			bias-pull-down;
+		};
+
+		bt {
+			pins = "gpio35", "gpio43", "gpio44";
+			function = "bt";
+
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		fm {
+			pins = "gpio41", "gpio42";
+			function = "fm";
+
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts
new file mode 100644
index 000000000000..983e10c3d863
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts
@@ -0,0 +1,815 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974pro.dtsi"
+#include "qcom-pma8084.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Samsung Galaxy S5";
+	compatible = "samsung,klte", "qcom,msm8974";
+
+	aliases {
+		serial0 = &blsp1_uart1;
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_3; /* SDC2 SD card slot */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pin_a>;
+
+		key-volume-down {
+			label = "volume_down";
+			gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <15>;
+		};
+
+		key-home {
+			label = "home_key";
+			gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		key-volume-up {
+			label = "volume_up";
+			gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	i2c-gpio-touchkey {
+		compatible = "i2c-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		sda-gpios = <&tlmm 95 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 96 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_touchkey_pins>;
+
+		touchkey@20 {
+			compatible = "cypress,tm2-touchkey";
+			reg = <0x20>;
+
+			interrupt-parent = <&pma8084_gpios>;
+			interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&touchkey_pin>;
+
+			vcc-supply = <&max77826_ldo15>;
+			vdd-supply = <&pma8084_l19>;
+
+			linux,keycodes = <KEY_APPSELECT KEY_BACK>;
+		};
+	};
+
+	i2c-gpio-led {
+		compatible = "i2c-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		scl-gpios = <&tlmm 121 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		sda-gpios = <&tlmm 120 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_led_gpioex_pins>;
+
+		i2c-gpio,delay-us = <2>;
+
+		gpio_expander: gpio@20 {
+			compatible = "nxp,pcal6416";
+			reg = <0x20>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			vcc-supply = <&pma8084_s4>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpioex_pin>;
+
+			reset-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+		};
+
+		led-controller@30 {
+			compatible = "panasonic,an30259a";
+			reg = <0x30>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@1 {
+				reg = <1>;
+				function = LED_FUNCTION_STATUS;
+				color = <LED_COLOR_ID_RED>;
+			};
+
+			led@2 {
+				reg = <2>;
+				function = LED_FUNCTION_STATUS;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@3 {
+				reg = <3>;
+				function = LED_FUNCTION_STATUS;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+		};
+	};
+
+	vreg_wlan: wlan-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "wl-reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio_expander 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vreg_panel: panel-regulator {
+		compatible = "regulator-fixed";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_en_pin>;
+
+		regulator-name = "panel-vddr-reg";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+
+		gpio = <&pma8084_gpios 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	/delete-node/ vreg-boost;
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+
+		interrupt-parent = <&pma8084_gpios>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		vdd-supply = <&max77826_ldo13>;
+		vio-supply = <&pma8084_lvs2>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_pin>;
+
+		syna,startup-delay-ms = <100>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_i2c6 {
+	status = "okay";
+
+	pmic@60 {
+		reg = <0x60>;
+		compatible = "maxim,max77826";
+
+		regulators {
+			max77826_ldo1: LDO1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			max77826_ldo2: LDO2 {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			max77826_ldo3: LDO3 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			max77826_ldo4: LDO4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			max77826_ldo5: LDO5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			max77826_ldo6: LDO6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			max77826_ldo7: LDO7 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			max77826_ldo8: LDO8 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			max77826_ldo9: LDO9 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			max77826_ldo10: LDO10 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2950000>;
+			};
+
+			max77826_ldo11: LDO11 {
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <2950000>;
+			};
+
+			max77826_ldo12: LDO12 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			max77826_ldo13: LDO13 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			max77826_ldo14: LDO14 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			max77826_ldo15: LDO15 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			max77826_buck: BUCK {
+				regulator-min-microvolt = <1225000>;
+				regulator-max-microvolt = <1225000>;
+			};
+
+			max77826_buckboost: BUCKBOOST {
+				regulator-min-microvolt = <3400000>;
+				regulator-max-microvolt = <3400000>;
+			};
+		};
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&blsp2_i2c6 {
+	status = "okay";
+
+	fuelgauge@36 {
+		compatible = "maxim,max17048";
+		reg = <0x36>;
+
+		maxim,double-soc;
+		maxim,rcomp = /bits/ 8 <0x56>;
+
+		interrupt-parent = <&pma8084_gpios>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&fuelgauge_pin>;
+	};
+};
+
+&blsp2_uart2 {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&blsp2_uart2_pins_active>;
+	pinctrl-1 = <&blsp2_uart2_pins_sleep>;
+
+	bluetooth {
+		compatible = "brcm,bcm43540-bt";
+		max-speed = <3000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_pins>;
+		device-wakeup-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio_expander 9 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <75 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wakeup";
+	};
+};
+
+&dsi0 {
+	status = "okay";
+
+	vdda-supply = <&pma8084_l2>;
+	vdd-supply = <&pma8084_l22>;
+	vddio-supply = <&pma8084_l12>;
+
+	panel: panel@0 {
+		reg = <0>;
+		compatible = "samsung,s6e3fa2";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_te_pin &panel_rst_pin>;
+
+		iovdd-supply = <&pma8084_lvs4>;
+		vddr-supply = <&vreg_panel>;
+
+		reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>;
+		te-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi0_out>;
+			};
+		};
+	};
+};
+
+&dsi0_out {
+	remote-endpoint = <&panel_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&dsi0_phy {
+	status = "okay";
+
+	vddio-supply = <&pma8084_l12>;
+};
+
+&gpu {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&otg {
+	status = "okay";
+
+	phys = <&usb_hs1_phy>;
+	phy-select = <&tcsr 0xb000 0>;
+
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+
+	ulpi {
+		phy@a {
+			status = "okay";
+
+			v1p8-supply = <&pma8084_l6>;
+			v3p3-supply = <&pma8084_l24>;
+
+			qcom,init-seq = /bits/ 8 <0x1 0x64>;
+		};
+	};
+};
+
+&pma8084_gpios {
+	gpio_keys_pin_a: gpio-keys-active-state {
+		pins = "gpio2", "gpio3", "gpio5";
+		function = "normal";
+
+		bias-pull-up;
+		power-source = <PMA8084_GPIO_S4>;
+	};
+
+	touchkey_pin: touchkey-int-state {
+		pins = "gpio6";
+		function = "normal";
+		bias-disable;
+		input-enable;
+		power-source = <PMA8084_GPIO_S4>;
+	};
+
+	touch_pin: touchscreen-int-state {
+		pins = "gpio8";
+		function = "normal";
+		bias-disable;
+		input-enable;
+		power-source = <PMA8084_GPIO_S4>;
+	};
+
+	panel_en_pin: panel-en-state {
+		pins = "gpio14";
+		function = "normal";
+		bias-pull-up;
+		power-source = <PMA8084_GPIO_S4>;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+	};
+
+	wlan_sleep_clk_pin: wlan-sleep-clk-state {
+		pins = "gpio16";
+		function = "func2";
+
+		output-high;
+		power-source = <PMA8084_GPIO_S4>;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+	};
+
+	panel_rst_pin: panel-rst-state {
+		pins = "gpio17";
+		function = "normal";
+		bias-disable;
+		power-source = <PMA8084_GPIO_S4>;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+	};
+
+	fuelgauge_pin: fuelgauge-int-state {
+		pins = "gpio21";
+		function = "normal";
+		bias-disable;
+		input-enable;
+		power-source = <PMA8084_GPIO_S4>;
+	};
+};
+
+&remoteproc_adsp {
+	status = "okay";
+	cx-supply = <&pma8084_s2>;
+};
+
+&remoteproc_mss {
+	status = "okay";
+	cx-supply = <&pma8084_s2>;
+	mss-supply = <&pma8084_s6>;
+	mx-supply = <&pma8084_s1>;
+	pll-supply = <&pma8084_l12>;
+};
+
+&rpm_requests {
+	pma8084-regulators {
+		compatible = "qcom,rpm-pma8084-regulators";
+
+		pma8084_s1: s1 {
+			regulator-min-microvolt = <675000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-always-on;
+		};
+
+		pma8084_s2: s2 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pma8084_s3: s3 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pma8084_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pma8084_s5: s5 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+		};
+
+		pma8084_s6: s6 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pma8084_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pma8084_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pma8084_l3: l3 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pma8084_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pma8084_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pma8084_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pma8084_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pma8084_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pma8084_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pma8084_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pma8084_l11: l11 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pma8084_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pma8084_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pma8084_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pma8084_l15: l15 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pma8084_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pma8084_l17: l17 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pma8084_l18: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pma8084_l19: l19 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pma8084_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+		};
+
+		pma8084_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+		};
+
+		pma8084_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pma8084_l23: l23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pma8084_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pma8084_l25: l25 {
+			regulator-min-microvolt = <2100000>;
+			regulator-max-microvolt = <2100000>;
+		};
+
+		pma8084_l26: l26 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pma8084_l27: l27 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pma8084_lvs1: lvs1 {};
+		pma8084_lvs2: lvs2 {};
+		pma8084_lvs3: lvs3 {};
+		pma8084_lvs4: lvs4 {};
+
+		pma8084_5vs1: 5vs1 {};
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	vmmc-supply = <&pma8084_l20>;
+	vqmmc-supply = <&pma8084_s4>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_on>;
+	pinctrl-1 = <&sdc1_off>;
+};
+
+&sdhc_2 {
+	status = "okay";
+	max-frequency = <100000000>;
+	vmmc-supply = <&vreg_wlan>;
+	vqmmc-supply = <&pma8084_s4>;
+	non-removable;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_on>;
+	pinctrl-1 = <&sdc2_off>;
+
+	wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <92 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_sleep_clk_pin &wifi_pin>;
+	};
+};
+
+&sdhc_3 {
+	status = "okay";
+	max-frequency = <100000000>;
+	vmmc-supply = <&pma8084_l21>;
+	vqmmc-supply = <&pma8084_l13>;
+
+	/*
+	 * cd-gpio is intentionally disabled. If enabled, an SD card
+	 * present during boot is not initialized correctly. Without
+	 * cd-gpios the driver resorts to polling, so hotplug works.
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdc3_on /* &sdhc3_cd_pin */>;
+	/* cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; */
+};
+
+&tlmm {
+	/* This seems suspicious, but somebody with this device should look into it. */
+	blsp2_uart2_pins_active: blsp2-uart2-pins-active {
+		pins = "gpio45", "gpio46", "gpio47", "gpio48";
+		function = "blsp_uart8";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	blsp2_uart2_pins_sleep: blsp2-uart2-pins-sleep {
+		pins = "gpio45", "gpio46", "gpio47", "gpio48";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	bt_pins: bt-pins {
+		hostwake {
+			pins = "gpio75";
+			function = "gpio";
+			drive-strength = <16>;
+			input-enable;
+		};
+
+		devwake {
+			pins = "gpio91";
+			function = "gpio";
+			drive-strength = <2>;
+		};
+	};
+
+	sdc1_on: sdhc1-on {
+		clk {
+			pins = "sdc1_clk";
+			drive-strength = <4>;
+			bias-disable;
+		};
+
+		cmd-data {
+			pins = "sdc1_cmd", "sdc1_data";
+			drive-strength = <4>;
+			bias-pull-up;
+		};
+	};
+
+	sdc3_on: sdc3-on {
+		pins = "gpio35", "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
+		function = "sdc3";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	sdhc3_cd_pin: sdc3-cd-on {
+		pins = "gpio62";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_on: sdhc2-on {
+		clk {
+			pins = "sdc2_clk";
+			drive-strength = <6>;
+			bias-disable;
+		};
+
+		cmd-data {
+			pins = "sdc2_cmd", "sdc2_data";
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+	};
+
+	i2c_touchkey_pins: i2c-touchkey {
+		pins = "gpio95", "gpio96";
+		function = "gpio";
+		input-enable;
+		bias-pull-up;
+	};
+
+	i2c_led_gpioex_pins: i2c-led-gpioex {
+		pins = "gpio120", "gpio121";
+		function = "gpio";
+		input-enable;
+		bias-pull-down;
+	};
+
+	gpioex_pin: gpioex {
+		pins = "gpio145";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+
+	wifi_pin: wifi {
+		pins = "gpio92";
+		function = "gpio";
+		input-enable;
+		bias-pull-down;
+	};
+
+	panel_te_pin: panel {
+		pins = "gpio12";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
new file mode 100644
index 000000000000..3f45f5c5d37b
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
@@ -0,0 +1,638 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974pro.dtsi"
+#include "qcom-pm8841.dtsi"
+#include "qcom-pm8941.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	model = "Sony Xperia Z2 Tablet";
+	compatible = "sony,xperia-castor", "qcom,msm8974";
+
+	aliases {
+		serial0 = &blsp1_uart2;
+		serial1 = &blsp2_uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pin_a>;
+
+		key-volume-down {
+			label = "volume_down";
+			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		key-camera-snapshot {
+			label = "camera_snapshot";
+			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA>;
+		};
+
+		key-camera-focus {
+			label = "camera_focus";
+			gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA_FOCUS>;
+		};
+
+		key-volume-up {
+			label = "volume_up";
+			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	vreg_bl_vddio: lcd-backlight-vddio {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_bl_vddio";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		gpio = <&tlmm 69 0>;
+		enable-active-high;
+
+		vin-supply = <&pm8941_s3>;
+		startup-delay-us = <70000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_backlight_en_pin_a>;
+	};
+
+	vreg_vsp: lcd-dcdc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_vsp";
+		regulator-min-microvolt = <5600000>;
+		regulator-max-microvolt = <5600000>;
+
+		gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_dcdc_en_pin_a>;
+	};
+
+	vreg_wlan: wlan-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "wl-reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_regulator_pin>;
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&blsp2_i2c2 {
+	status = "okay";
+	clock-frequency = <355000>;
+
+	synaptics@2c {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x2c>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <86 IRQ_TYPE_EDGE_FALLING>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd-supply = <&pm8941_l22>;
+		vio-supply = <&pm8941_lvs3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_pin>;
+
+		syna,startup-delay-ms = <10>;
+
+		rmi-f01@1 {
+			reg = <0x1>;
+			syna,nosleep = <1>;
+		};
+
+		rmi-f11@11 {
+			reg = <0x11>;
+			syna,f11-flip-x = <1>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp2_i2c5 {
+	status = "okay";
+	clock-frequency = <355000>;
+
+	lp8566_wled: backlight@2c {
+		compatible = "ti,lp8556";
+		reg = <0x2c>;
+		power-supply = <&vreg_bl_vddio>;
+
+		bl-name = "backlight";
+		dev-ctrl = /bits/ 8 <0x05>;
+		init-brt = /bits/ 8 <0x3f>;
+		rom_a0h {
+			rom-addr = /bits/ 8 <0xa0>;
+			rom-val = /bits/ 8 <0xff>;
+		};
+		rom_a1h {
+			rom-addr = /bits/ 8 <0xa1>;
+			rom-val = /bits/ 8 <0x3f>;
+		};
+		rom_a2h {
+			rom-addr = /bits/ 8 <0xa2>;
+			rom-val = /bits/ 8 <0x20>;
+		};
+		rom_a3h {
+			rom-addr = /bits/ 8 <0xa3>;
+			rom-val = /bits/ 8 <0x5e>;
+		};
+		rom_a4h {
+			rom-addr = /bits/ 8 <0xa4>;
+			rom-val = /bits/ 8 <0x02>;
+		};
+		rom_a5h {
+			rom-addr = /bits/ 8 <0xa5>;
+			rom-val = /bits/ 8 <0x04>;
+		};
+		rom_a6h {
+			rom-addr = /bits/ 8 <0xa6>;
+			rom-val = /bits/ 8 <0x80>;
+		};
+		rom_a7h {
+			rom-addr = /bits/ 8 <0xa7>;
+			rom-val = /bits/ 8 <0xf7>;
+		};
+		rom_a9h {
+			rom-addr = /bits/ 8 <0xa9>;
+			rom-val = /bits/ 8 <0x80>;
+		};
+		rom_aah {
+			rom-addr = /bits/ 8 <0xaa>;
+			rom-val = /bits/ 8 <0x0f>;
+		};
+		rom_aeh {
+			rom-addr = /bits/ 8 <0xae>;
+			rom-val = /bits/ 8 <0x0f>;
+		};
+	};
+};
+
+&blsp2_uart1 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <3000000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_pin>, <&bt_dev_wake_pin>, <&bt_reg_on_pin>;
+
+		host-wakeup-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&pm8941_gpios 16 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&otg {
+	status = "okay";
+
+	phys = <&usb_hs1_phy>;
+	phy-select = <&tcsr 0xb000 0>;
+	extcon = <&smbb>, <&usb_id>;
+	vbus-supply = <&chg_otg>;
+
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+
+	ulpi {
+		phy@a {
+			status = "okay";
+
+			v1p8-supply = <&pm8941_l6>;
+			v3p3-supply = <&pm8941_l24>;
+
+			extcon = <&smbb>;
+			qcom,init-seq = /bits/ 8 <0x1 0x64>;
+		};
+	};
+};
+
+&pm8941_coincell {
+	status = "okay";
+
+	qcom,rset-ohms = <2100>;
+	qcom,vset-millivolts = <3000>;
+};
+
+&pm8941_gpios {
+	gpio_keys_pin_a: gpio-keys-active-state {
+		pins = "gpio2", "gpio5";
+		function = "normal";
+
+		bias-pull-up;
+		power-source = <PM8941_GPIO_S3>;
+	};
+
+	bt_reg_on_pin: bt-reg-on-state {
+		pins = "gpio16";
+		function = "normal";
+
+		output-low;
+		power-source = <PM8941_GPIO_S3>;
+	};
+
+	wlan_sleep_clk_pin: wl-sleep-clk-state {
+		pins = "gpio17";
+		function = "func2";
+
+		output-high;
+		power-source = <PM8941_GPIO_S3>;
+	};
+
+	wlan_regulator_pin: wl-reg-active-state {
+		pins = "gpio18";
+		function = "normal";
+
+		bias-disable;
+		power-source = <PM8941_GPIO_S3>;
+	};
+
+	lcd_dcdc_en_pin_a: lcd-dcdc-en-active-state {
+		pins = "gpio20";
+		function = "normal";
+
+		bias-disable;
+		power-source = <PM8941_GPIO_S3>;
+		input-disable;
+		output-low;
+	};
+
+};
+
+&pm8941_lpg {
+	status = "okay";
+
+	qcom,power-source = <1>;
+
+	rgb-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@5 {
+			reg = <5>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+
+		led@6 {
+			reg = <6>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@7 {
+			reg = <7>;
+			color = <LED_COLOR_ID_RED>;
+		};
+	};
+};
+
+&rpm_requests {
+	pm8941-regulators {
+		compatible = "qcom,rpm-pm8941-regulators";
+
+		vdd_l1_l3-supply = <&pm8941_s1>;
+		vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+		vdd_l4_l11-supply = <&pm8941_s1>;
+		vdd_l5_l7-supply = <&pm8941_s2>;
+		vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+		vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+		vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+		vdd_l21-supply = <&vreg_boost>;
+
+		pm8941_s1: s1 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_s2: s2 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+			regulator-boot-on;
+		};
+
+		pm8941_s3: s3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-system-load = <154000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_s4: s4 {
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+		};
+
+		pm8941_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8941_l3: l3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8941_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8941_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8941_l11: l11 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8941_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l15: l15 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8941_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8941_l17: l17 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8941_l18: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8941_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8941_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <500000>;
+			regulator-allow-set-load;
+			regulator-boot-on;
+		};
+
+		pm8941_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8941_l23: l23 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8941_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+			regulator-boot-on;
+		};
+
+		pm8941_lvs3: lvs3 {};
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	vmmc-supply = <&pm8941_l20>;
+	vqmmc-supply = <&pm8941_s3>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_on>;
+	pinctrl-1 = <&sdc1_off>;
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	vmmc-supply = <&pm8941_l21>;
+	vqmmc-supply = <&pm8941_l13>;
+
+	cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_on>;
+	pinctrl-1 = <&sdc2_off>;
+};
+
+&sdhc_3 {
+	status = "okay";
+
+	max-frequency = <100000000>;
+	vmmc-supply = <&vreg_wlan>;
+	non-removable;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdc3_on>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bcrmf@1 {
+		compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
+		reg = <1>;
+
+		brcm,drive-strength = <10>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_sleep_clk_pin>;
+	};
+};
+
+&smbb {
+	qcom,fast-charge-safe-current = <1500000>;
+	qcom,fast-charge-current-limit = <1500000>;
+	qcom,dc-current-limit = <1800000>;
+	qcom,fast-charge-safe-voltage = <4400000>;
+	qcom,fast-charge-high-threshold-voltage = <4350000>;
+	qcom,fast-charge-low-threshold-voltage = <3400000>;
+	qcom,auto-recharge-threshold-voltage = <4200000>;
+	qcom,minimum-input-voltage = <4300000>;
+};
+
+&tlmm {
+	lcd_backlight_en_pin_a: lcd-backlight-vddio {
+		pins = "gpio69";
+		drive-strength = <10>;
+		output-low;
+		bias-disable;
+	};
+
+	sdc1_on: sdc1-on {
+		clk {
+			pins = "sdc1_clk";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		cmd-data {
+			pins = "sdc1_cmd", "sdc1_data";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+	};
+
+	sdc2_on: sdc2-on {
+		clk {
+			pins = "sdc2_clk";
+			drive-strength = <6>;
+			bias-disable;
+		};
+
+		cmd-data {
+			pins = "sdc2_cmd", "sdc2_data";
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+
+		cd {
+			pins = "gpio62";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	sdc3_on: sdc3-on {
+		clk {
+			pins = "gpio40";
+			function = "sdc3";
+			drive-strength = <10>;
+			bias-disable;
+		};
+
+		cmd {
+			pins = "gpio39";
+			function = "sdc3";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+
+		data {
+			pins = "gpio35", "gpio36", "gpio37", "gpio38";
+			function = "sdc3";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+	};
+
+	ts_int_pin: ts-int-pin {
+		pins = "gpio86";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		input-enable;
+	};
+
+	bt_host_wake_pin: bt-host-wake {
+		pins = "gpio95";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	bt_dev_wake_pin: bt-dev-wake {
+		pins = "gpio96";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-msm8974pro.dtsi b/arch/arm/boot/dts/qcom-msm8974pro.dtsi
index b64c28036dd0..58df6e75ab6d 100644
--- a/arch/arm/boot/dts/qcom-msm8974pro.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974pro.dtsi
@@ -1,23 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974.dtsi"
 
-/ {
-	soc {
-		sdhci@f9824900 {
-			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
-				 <&gcc GCC_SDCC1_AHB_CLK>,
-				 <&xo_board>,
-				 <&gcc GCC_SDCC1_CDCCAL_FF_CLK>,
-				 <&gcc GCC_SDCC1_CDCCAL_SLEEP_CLK>;
-			clock-names = "core", "iface", "xo", "cal", "sleep";
-		};
+&gcc {
+	compatible = "qcom,gcc-msm8974pro";
+};
 
-		clock-controller@fc400000 {
-				compatible = "qcom,gcc-msm8974pro";
-		};
+&gpu {
+	compatible = "qcom,adreno-330.2", "qcom,adreno";
+};
 
-		adreno@fdb00000 {
-			compatible = "qcom,adreno-330.2",
-				     "qcom,adreno";
-		};
-	};
+&sdhc_1 {
+	clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+		 <&gcc GCC_SDCC1_APPS_CLK>,
+		 <&xo_board>,
+		 <&gcc GCC_SDCC1_CDCCAL_FF_CLK>,
+		 <&gcc GCC_SDCC1_CDCCAL_SLEEP_CLK>;
+	clock-names = "iface", "core", "xo", "cal", "sleep";
 };
diff --git a/arch/arm/boot/dts/qcom-pm8226.dtsi b/arch/arm/boot/dts/qcom-pm8226.dtsi
index dddb5150dfd7..9b7d9d04ded6 100644
--- a/arch/arm/boot/dts/qcom-pm8226.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8226.dtsi
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: BSD-3-Clause
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
 
 &spmi_bus {
 	pm8226_0: pm8226@0 {
@@ -16,6 +17,79 @@
 			debounce = <15625>;
 			bias-pull-up;
 		};
+
+		smbb: charger@1000 {
+			compatible = "qcom,pm8226-charger";
+			reg = <0x1000>;
+			interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "chg-done",
+					  "chg-fast",
+					  "chg-trkl",
+					  "bat-temp-ok",
+					  "bat-present",
+					  "chg-gone",
+					  "usb-valid",
+					  "dc-valid";
+
+			chg_otg: otg-vbus { };
+		};
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pm8226_vadc: adc@3100 {
+			compatible = "qcom,spmi-vadc";
+			reg = <0x3100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			adc-chan@7 {
+				reg = <VADC_VSYS>;
+				qcom,pre-scaling = <1 3>;
+				label = "vph_pwr";
+			};
+			adc-chan@8 {
+				reg = <VADC_DIE_TEMP>;
+				label = "die_temp";
+			};
+			adc-chan@9 {
+				reg = <VADC_REF_625MV>;
+				label = "ref_625mv";
+			};
+			adc-chan@a {
+				reg = <VADC_REF_1250MV>;
+				label = "ref_1250mv";
+			};
+			adc-chan@e {
+				reg = <VADC_GND_REF>;
+			};
+			adc-chan@f {
+				reg = <VADC_VDD_VADC>;
+			};
+		};
+
+		pm8226_mpps: mpps@a000 {
+			compatible = "qcom,pm8226-mpp", "qcom,spmi-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8226_mpps 0 0 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
 	};
 
 	pm8226_1: pm8226@1 {
@@ -23,5 +97,15 @@
 		reg = <0x1 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+
+		pm8226_spmi_regulators: pm8226-regulators {
+			compatible = "qcom,pm8226-regulators";
+		};
+
+		pm8226_vib: vibrator@c000 {
+			compatible = "qcom,pm8916-vib";
+			reg = <0xc000>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/qcom-pm8841.dtsi b/arch/arm/boot/dts/qcom-pm8841.dtsi
index 2caf71eacb52..b5cdde034d18 100644
--- a/arch/arm/boot/dts/qcom-pm8841.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8841.dtsi
@@ -24,6 +24,7 @@
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0x2400>;
 			interrupts = <4 0x24 0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <0>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
index da00b8f5eecd..9cd49deb9fa7 100644
--- a/arch/arm/boot/dts/qcom-pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8941.dtsi
@@ -68,7 +68,7 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			boost_bypass_n_pin: boost-bypass {
+			boost_bypass_n_pin: boost-bypass-state {
 				pins = "gpio21";
 				function = "normal";
 			};
@@ -93,7 +93,7 @@
 			#thermal-sensor-cells = <0>;
 		};
 
-		pm8941_vadc: vadc@3100 {
+		pm8941_vadc: adc@3100 {
 			compatible = "qcom,spmi-vadc";
 			reg = <0x3100>;
 			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
@@ -131,7 +131,7 @@
 			qcom,external-resistor-micro-ohms = <10000>;
 		};
 
-		coincell@2800 {
+		pm8941_coincell: coincell@2800 {
 			compatible = "qcom,pm8941-coincell";
 			reg = <0x2800>;
 			status = "disabled";
@@ -144,6 +144,16 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pm8941_lpg: pwm {
+			compatible = "qcom,pm8941-lpg";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pwm-cells = <2>;
+
+			status = "disabled";
+		};
+
 		pm8941_wled: wled@d800 {
 			compatible = "qcom,pm8941-wled";
 			reg = <0xd800>;
diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi
index 7b8a8d9695da..e77602e9f95c 100644
--- a/arch/arm/boot/dts/qcom-pma8084.dtsi
+++ b/arch/arm/boot/dts/qcom-pma8084.dtsi
@@ -56,7 +56,7 @@
 			io-channel-names = "thermal";
 		};
 
-		pma8084_vadc: vadc@3100 {
+		pma8084_vadc: adc@3100 {
 			compatible = "qcom,spmi-vadc";
 			reg = <0x3100>;
 			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
diff --git a/arch/arm/boot/dts/qcom-pmx55.dtsi b/arch/arm/boot/dts/qcom-pmx55.dtsi
index 6571b88d018a..e1b869480bbd 100644
--- a/arch/arm/boot/dts/qcom-pmx55.dtsi
+++ b/arch/arm/boot/dts/qcom-pmx55.dtsi
@@ -16,7 +16,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		power-on@800 {
+		pon@800 {
 			compatible = "qcom,pm8916-pon";
 			reg = <0x0800>;
 
@@ -69,6 +69,7 @@
 			compatible = "qcom,pmx55-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
+			gpio-ranges = <&pmx55_gpios 0 0 11>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/qcom-pmx65.dtsi b/arch/arm/boot/dts/qcom-pmx65.dtsi
new file mode 100644
index 000000000000..abf229a8b75a
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-pmx65.dtsi
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pmic@1 {
+		compatible = "qcom,pmx65", "qcom,spmi-pmic";
+		reg = <1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmx65_temp: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmx65_gpios: pinctrl@8800 {
+			compatible = "qcom,pmx65-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmx65_gpios 0 0 16>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi
index 8ac0492c7659..c72540223fa9 100644
--- a/arch/arm/boot/dts/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx55.dtsi
@@ -206,7 +206,7 @@
 		blsp1_uart3: serial@831000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x00831000 0x200>;
-			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc 30>,
 				 <&gcc 9>;
 			clock-names = "core", "iface";
@@ -275,13 +275,6 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
-		ipa_virt: interconnect@1e00000 {
-			compatible = "qcom,sdx55-ipa-virt";
-			reg = <0x01e00000 0x100000>;
-			#interconnect-cells = <1>;
-			qcom,bcm-voters = <&apps_bcm_voter>;
-		};
-
 		qpic_bam: dma-controller@1b04000 {
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0x01b04000 0x1c000>;
@@ -395,7 +388,7 @@
 			reg = <0x01fc0000 0x1000>;
 		};
 
-		sdhc_1: sdhci@8804000 {
+		sdhc_1: mmc@8804000 {
 			compatible = "qcom,sdx55-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0x08804000 0x1000>;
 			interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
@@ -413,7 +406,7 @@
 			      <0x40000000 0xf1d>,
 			      <0x40000f20 0xc8>,
 			      <0x40001000 0x1000>,
-			      <0x40002000 0x10000>,
+			      <0x40200000 0x100000>,
 			      <0x01c03000 0x3000>;
 			reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
 				    "mmio";
@@ -490,10 +483,13 @@
 			clocks = <&gcc GCC_USB30_SLV_AHB_CLK>,
 				 <&gcc GCC_USB30_MASTER_CLK>,
 				 <&gcc GCC_USB30_MSTR_AXI_CLK>,
-				 <&gcc GCC_USB30_MOCK_UTMI_CLK>,
-				 <&gcc GCC_USB30_SLEEP_CLK>;
-			clock-names = "cfg_noc", "core", "iface", "mock_utmi",
-				      "sleep";
+				 <&gcc GCC_USB30_SLEEP_CLK>,
+				 <&gcc GCC_USB30_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
 
 			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
 					  <&gcc GCC_USB30_MASTER_CLK>;
@@ -536,7 +532,7 @@
 			reg = <0x0c264000 0x1000>;
 		};
 
-		spmi_bus: qcom,spmi@c440000 {
+		spmi_bus: spmi@c440000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0x0c440000 0x0000d00>,
 			      <0x0c600000 0x2000000>,
@@ -565,8 +561,8 @@
 			#interrupt-cells = <2>;
 		};
 
-		imem@1468f000 {
-			compatible = "simple-mfd";
+		sram@1468f000 {
+			compatible = "qcom,sdx55-imem", "syscon", "simple-mfd";
 			reg = <0x1468f000 0x1000>;
 
 			#address-cells = <1>;
@@ -770,7 +766,7 @@
 				};
 			};
 
-			apps_bcm_voter: bcm_voter {
+			apps_bcm_voter: bcm-voter {
 				compatible = "qcom,bcm-voter";
 			};
 		};
diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
index 59457da8e5f1..85ea02d8362d 100644
--- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts
+++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
@@ -5,6 +5,10 @@
 /dts-v1/;
 
 #include "qcom-sdx65.dtsi"
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <arm64/qcom/pmk8350.dtsi>
+#include <arm64/qcom/pm8150b.dtsi>
+#include "qcom-pmx65.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. SDX65 MTP";
@@ -18,8 +22,270 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mpss_dsm: memory@8c400000 {
+			no-map;
+			reg = <0x8c400000 0x3200000>;
+		};
+
+		ipa_fw_mem: memory@8fced000 {
+			no-map;
+			reg = <0x8fced000 0x10000>;
+		};
+
+		mpss_adsp_mem: memory@90800000 {
+			no-map;
+			reg = <0x90800000 0x10000000>;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	vreg_bob_3p3: pmx65_bob {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_bob_3p3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+};
+
+&apps_rsc {
+	pmx65-rpmh-regulators {
+		compatible = "qcom,pmx65-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-l1-supply = <&vreg_s2b_1p224>;
+		vdd-l2-l18-supply = <&vreg_s2b_1p224>;
+		vdd-l3-supply = <&vreg_s8b_0p824>;
+		vdd-l4-supply = <&vreg_s7b_0p936>;
+		vdd-l5-l6-l16-supply = <&vreg_s4b_1p824>;
+		vdd-l7-supply = <&vreg_s3b_0p776>;
+		vdd-l8-l9-supply = <&vreg_s8b_0p824>;
+		vdd-l10-supply = <&vreg_bob_3p3>;
+		vdd-l11-l13-supply = <&vreg_bob_3p3>;
+		vdd-l12-supply = <&vreg_s2b_1p224>;
+		vdd-l14-supply = <&vreg_s3b_0p776>;
+		vdd-l15-supply = <&vreg_s2b_1p224>;
+		vdd-l17-supply = <&vreg_s8b_0p824>;
+		vdd-l19-supply = <&vreg_s3b_0p776>;
+		vdd-l20-supply = <&vreg_s7b_0p936>;
+		vdd-l21-supply = <&vreg_s7b_0p936>;
+
+		vreg_s2b_1p224: smps2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1400000>;
+		};
+
+		vreg_s3b_0p776: smps3 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1040000>;
+		};
+
+		vreg_s4b_1p824: smps4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2024000>;
+		};
+
+		vreg_s7b_0p936: smps7 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1040000>;
+		};
+
+		vreg_s8b_0p824: smps8 {
+			regulator-min-microvolt = <304000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		vreg_l1b_1p2: ldo1 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo2 {
+			regulator-min-microvolt = <1128000>;
+			regulator-max-microvolt = <1128000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo3 {
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_0p88: ldo4 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_1p8: ldo5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo7 {
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <752000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo8 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo9 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10b_3p08: ldo10 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo11 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo12 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo13 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo14 {
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo15 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo16 {
+			regulator-min-microvolt = <1776000>;
+			regulator-max-microvolt = <1776000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo17 {
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo19 {
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <752000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo20 {
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo21 {
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
 };
 
 &blsp1_uart3 {
-	status = "ok";
+	status = "okay";
+};
+
+&qpic_bam {
+	status = "okay";
+};
+
+&qpic_nand {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <8>;
+		/* ico and efs2 partitions are secured */
+		secure-regions = /bits/ 64 <0x500000 0x500000
+					    0xa00000 0xb00000>;
+	};
+};
+
+&remoteproc_mpss {
+	status = "okay";
+	memory-region = <&mpss_adsp_mem>;
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_hsphy {
+	status = "okay";
+	vdda-pll-supply = <&vreg_l4b_0p88>;
+	vdda33-supply = <&vreg_l10b_3p08>;
+	vdda18-supply = <&vreg_l5b_1p8>;
+};
+
+&usb_qmpphy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l4b_0p88>;
+	vdda-pll-supply = <&vreg_l1b_1p2>;
 };
diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
index 796641d30e06..4cd405db5500 100644
--- a/arch/arm/boot/dts/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/clock/qcom,gcc-sdx65.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 
 / {
@@ -36,6 +37,12 @@
 			clock-output-names = "sleep_clk";
 			#clock-cells = <0>;
 		};
+
+		nand_clk_dummy: nand-clk-dummy {
+			compatible = "fixed-clock";
+			clock-frequency = <32764>;
+			#clock-cells = <0>;
+		};
 	};
 
 	cpus {
@@ -47,9 +54,50 @@
 			compatible = "arm,cortex-a7";
 			reg = <0x0>;
 			enable-method = "psci";
+			clocks = <&apcs>;
+			power-domains = <&rpmhpd SDX65_CX_AO>;
+			power-domain-names = "rpmhpd";
+			operating-points-v2 = <&cpu_opp_table>;
 		};
 	};
 
+	cpu_opp_table: cpu-opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-345600000 {
+			opp-hz = /bits/ 64 <345600000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+
+		opp-1094400000 {
+			opp-hz = /bits/ 64 <1094400000>;
+			required-opps = <&rpmhpd_opp_nom>;
+		};
+
+		opp-1497600000 {
+			opp-hz = /bits/ 64 <1497600000>;
+			required-opps = <&rpmhpd_opp_turbo>;
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-sdx65", "qcom,scm";
+		};
+	};
+
+	mc_virt: interconnect-mc-virt {
+		compatible = "qcom,sdx65-mc-virt";
+		#interconnect-cells = <1>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
@@ -60,11 +108,89 @@
 		#size-cells = <1>;
 		ranges;
 
+		tz_heap_mem: memory@8fcad000 {
+			no-map;
+			reg = <0x8fcad000 0x40000>;
+		};
+
+		secdata_mem: memory@8fcfd000 {
+			no-map;
+			reg = <0x8fcfd000 0x1000>;
+		};
+
+		hyp_mem: memory@8fd00000 {
+			no-map;
+			reg = <0x8fd00000 0x80000>;
+		};
+
+		access_control_mem: memory@8fd80000 {
+			no-map;
+			reg = <0x8fd80000 0x80000>;
+		};
+
+		aop_mem: memory@8fe00000 {
+			no-map;
+			reg = <0x8fe00000 0x20000>;
+		};
+
+		smem_mem: memory@8fe20000 {
+			compatible = "qcom,smem";
+			reg = <0x8fe20000 0xc0000>;
+			hwlocks = <&tcsr_mutex 3>;
+			no-map;
+		};
+
 		cmd_db: reserved-memory@8fee0000 {
 			compatible = "qcom,cmd-db";
 			reg = <0x8fee0000 0x20000>;
 			no-map;
 		};
+
+		tz_mem: memory@8ff00000 {
+			no-map;
+			reg = <0x8ff00000 0x100000>;
+		};
+
+		tz_apps_mem: memory@90000000 {
+			no-map;
+			reg = <0x90000000 0x500000>;
+		};
+
+		llcc_tcm_mem: memory@15800000 {
+			no-map;
+			reg = <0x15800000 0x800000>;
+		};
+	};
+
+	smp2p-mpss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+		interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&apcs 14>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		ipa_smp2p_out: ipa-ap-to-modem {
+			qcom,entry-name = "ipa";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		ipa_smp2p_in: ipa-modem-to-ap {
+			qcom,entry-name = "ipa";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
 	};
 
 	soc: soc {
@@ -78,6 +204,7 @@
 			reg = <0x00100000 0x001f7400>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>;
 			clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+			#power-domain-cells = <1>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 		};
@@ -91,6 +218,208 @@
 			status = "disabled";
 		};
 
+		usb_hsphy: phy@ff4000 {
+			compatible = "qcom,usb-snps-hs-7nm-phy";
+			reg = <0xff4000 0x120>;
+			#phy-cells = <0>;
+			status = "disabled";
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+			resets = <&gcc GCC_QUSB2PHY_BCR>;
+		};
+
+		usb_qmpphy: phy@ff6000 {
+			compatible = "qcom,sdx65-qmp-usb3-uni-phy";
+			reg = <0x00ff6000 0x1c8>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_EN>;
+			clock-names = "aux", "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_USB3PHY_PHY_BCR>,
+				 <&gcc GCC_USB3_PHY_BCR>;
+			reset-names = "phy", "common";
+
+			usb_ssphy: phy@ff6200 {
+				reg = <0x00ff6e00 0x160>,
+				      <0x00ff7000 0x1ec>,
+				      <0x00ff6200 0x1e00>;
+				#phy-cells = <0>;
+				#clock-cells = <0>;
+				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			};
+		};
+
+		system_noc: interconnect@1620000 {
+			compatible = "qcom,sdx65-system-noc";
+			reg = <0x01620000 0x31200>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		qpic_bam: dma-controller@1b04000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x01b04000 0x1c000>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rpmhcc RPMH_QPIC_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			status = "disabled";
+		};
+
+		qpic_nand: nand-controller@1b30000 {
+			compatible = "qcom,sdx55-nand";
+			reg = <0x01b30000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&rpmhcc RPMH_QPIC_CLK>,
+				 <&nand_clk_dummy>;
+			clock-names = "core", "aon";
+
+			dmas = <&qpic_bam 0>,
+			       <&qpic_bam 1>,
+			       <&qpic_bam 2>;
+			dma-names = "tx", "rx", "cmd";
+			status = "disabled";
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01f40000 0x40000>;
+			#hwlock-cells = <1>;
+		};
+
+		remoteproc_mpss: remoteproc@4080000 {
+			compatible = "qcom,sdx55-mpss-pas";
+			reg = <0x04080000 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SDX65_CX>,
+					<&rpmhpd SDX65_MSS>;
+			power-domain-names = "cx", "mss";
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 114 IRQ_TYPE_EDGE_RISING>;
+				label = "mpss";
+				qcom,remote-pid = <1>;
+				mboxes = <&apcs 15>;
+			};
+		};
+
+		sdhc_1: mmc@8804000 {
+			compatible = "qcom,sdx65-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x08804000 0x1000>;
+			reg-names = "hc";
+			interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&gcc GCC_SDCC1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		mem_noc: interconnect@9680000 {
+			compatible = "qcom,sdx65-mem-noc";
+			reg = <0x09680000 0x27200>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		usb: usb@a6f8800 {
+			compatible = "qcom,sdx65-dwc3", "qcom,dwc3";
+			reg = <0x0a6f8800 0x400>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_USB30_SLV_AHB_CLK>,
+				 <&gcc GCC_USB30_MASTER_CLK>,
+				 <&gcc GCC_USB30_MSTR_AXI_CLK>,
+				 <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB30_SLEEP_CLK>;
+			clock-names = "cfg_noc", "core", "iface", "mock_utmi",
+					"sleep";
+
+			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 76 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 18 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 19 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "hs_phy_irq",
+					  "ss_phy_irq",
+					  "dm_hs_phy_irq",
+					  "dp_hs_phy_irq";
+
+			power-domains = <&gcc USB30_GDSC>;
+
+			resets = <&gcc GCC_USB30_BCR>;
+
+			usb_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0x0a600000 0xcd00>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x1a0 0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_hsphy>, <&usb_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		restart@c264000 {
+			compatible = "qcom,pshold";
+			reg = <0x0c264000 0x1000>;
+		};
+
+		spmi_bus: qcom,spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0xc440000 0xd00>,
+				<0xc600000 0x2000000>,
+				<0xe600000 0x100000>,
+				<0xe700000 0xa0000>,
+				<0xc40a000 0x26000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "periph_irq";
+			interrupt-controller;
+			#interrupt-cells = <4>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			qcom,channel = <0>;
+			qcom,ee = <0>;
+		};
+
 		tlmm: pinctrl@f100000 {
 			compatible = "qcom,sdx65-tlmm";
 			reg = <0xf100000 0x300000>;
@@ -112,6 +441,59 @@
 			interrupt-controller;
 		};
 
+		imem@1468f000 {
+			compatible = "simple-mfd";
+			reg = <0x1468f000 0x1000>;
+			ranges = <0x0 0x1468f000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pil-reloc@94c {
+				compatible = "qcom,pil-reloc-info";
+				reg = <0x94c 0xc8>;
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sdx65-smmu-500", "arm,mmu-500";
+			reg = <0x15000000 0x40000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts =	<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		intc: interrupt-controller@17800000 {
 			compatible = "qcom,msm-qgic2";
 			interrupt-controller;
@@ -121,6 +503,29 @@
 			      <0x17802000 0x1000>;
 		};
 
+		a7pll: clock@17808000 {
+			compatible = "qcom,sdx55-a7pll";
+			reg = <0x17808000 0x1000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "bi_tcxo";
+			#clock-cells = <0>;
+		};
+
+		apcs: mailbox@17810000 {
+			compatible = "qcom,sdx55-apcs-gcc", "syscon";
+			reg = <0x17810000 0x2000>;
+			#mbox-cells = <1>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&a7pll>, <&gcc GPLL0>;
+			clock-names = "ref", "pll", "aux";
+			#clock-cells = <0>;
+		};
+
+		watchdog@17817000 {
+			compatible = "qcom,apss-wdt-sdx65", "qcom,kpss-wdt";
+			reg = <0x17817000 0x1000>;
+			clocks = <&sleep_clk>;
+		};
+
 		timer@17820000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -202,12 +607,67 @@
 				<WAKE_TCS    2>,
 				<CONTROL_TCS 1>;
 
-			rpmhcc: clock-controller@1 {
+			rpmhcc: clock-controller {
 				compatible = "qcom,sdx65-rpmh-clk";
 				#clock-cells = <1>;
 				clock-names = "xo";
 				clocks = <&xo_board>;
 			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sdx65-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp10 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
 		};
 	};
 
diff --git a/arch/arm/boot/dts/r7s9210-rza2mevb.dts b/arch/arm/boot/dts/r7s9210-rza2mevb.dts
index 9c0d9686fe01..69a5a44b8a2f 100644
--- a/arch/arm/boot/dts/r7s9210-rza2mevb.dts
+++ b/arch/arm/boot/dts/r7s9210-rza2mevb.dts
@@ -71,10 +71,10 @@
 	leds {
 		compatible = "gpio-leds";
 
-		red {
+		led-red {
 			gpios = <&pinctrl RZA2_PIN(PORT6, 0) GPIO_ACTIVE_HIGH>;
 		};
-		green {
+		led-green {
 			gpios = <&pinctrl RZA2_PIN(PORTC, 1) GPIO_ACTIVE_HIGH>;
 		};
 	};
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
index a01f3def1c69..0af63ddc4473 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
@@ -266,7 +266,7 @@
 		function = "lcd0";
 	};
 
-	lcd0_mux {
+	lcd0-mux-hog {
 		/* DBGMD/LCDC0/FSIA MUX */
 		gpio-hog;
 		gpios = <176 0>;
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
index 3c8a7c8b1fdd..4e58c54cde17 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
@@ -91,10 +91,10 @@
 
 &gpio0 {
 	/* Disable hogging GP0_18 to output LOW */
-	/delete-node/ qspi_en;
+	/delete-node/ qspi-en-hog;
 
 	/* Hog GP0_18 to output HIGH to enable VIN2 */
-	vin2_en {
+	vin2-en-hog {
 		gpio-hog;
 		gpios = <18 GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
index a5a79cdbcd0e..64102b664055 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
@@ -226,7 +226,7 @@
 };
 
 &gpio0 {
-	touch-interrupt {
+	touch-interrupt-hog {
 		gpio-hog;
 		gpios = <24 GPIO_ACTIVE_LOW>;
 		input;
@@ -234,7 +234,7 @@
 };
 
 &gpio1 {
-	can-trx-en-gpio{
+	can-trx-en-hog {
 		gpio-hog;
 		gpios = <28 GPIO_ACTIVE_HIGH>;
 		output-low;
diff --git a/arch/arm/boot/dts/r8a7742-iwg21m.dtsi b/arch/arm/boot/dts/r8a7742-iwg21m.dtsi
index 5621c9ed698f..b281a4d164b0 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21m.dtsi
+++ b/arch/arm/boot/dts/r8a7742-iwg21m.dtsi
@@ -37,7 +37,7 @@
 
 &gpio0 {
 	/* GP0_18 set low to select QSPI. Doing so will disable VIN2 */
-	qspi_en {
+	qspi-en-hog {
 		gpio-hog;
 		gpios = <18 GPIO_ACTIVE_HIGH>;
 		output-low;
diff --git a/arch/arm/boot/dts/r8a7742.dtsi b/arch/arm/boot/dts/r8a7742.dtsi
index 420e0b3259d4..758a1bf02fae 100644
--- a/arch/arm/boot/dts/r8a7742.dtsi
+++ b/arch/arm/boot/dts/r8a7742.dtsi
@@ -633,7 +633,7 @@
 			status = "disabled";
 		};
 
-		usbphy: usb-phy@e6590100 {
+		usbphy: usb-phy-controller@e6590100 {
 			compatible = "renesas,usb-phy-r8a7742",
 				     "renesas,rcar-gen2-usb-phy";
 			reg = <0 0xe6590100 0 0x100>;
@@ -645,11 +645,11 @@
 			resets = <&cpg 704>;
 			status = "disabled";
 
-			usb0: usb-channel@0 {
+			usb0: usb-phy@0 {
 				reg = <0>;
 				#phy-cells = <1>;
 			};
-			usb2: usb-channel@2 {
+			usb2: usb-phy@2 {
 				reg = <2>;
 				#phy-cells = <1>;
 			};
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index 3502b5dcc04f..20f1d98a048d 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -140,6 +140,7 @@
 			compatible = "renesas,r8a7743-wdt",
 				     "renesas,rcar-gen2-wdt";
 			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 402>;
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
 			resets = <&cpg 402>;
@@ -583,7 +584,7 @@
 			status = "disabled";
 		};
 
-		usbphy: usb-phy@e6590100 {
+		usbphy: usb-phy-controller@e6590100 {
 			compatible = "renesas,usb-phy-r8a7743",
 				     "renesas,rcar-gen2-usb-phy";
 			reg = <0 0xe6590100 0 0x100>;
@@ -595,11 +596,11 @@
 			resets = <&cpg 704>;
 			status = "disabled";
 
-			usb0: usb-channel@0 {
+			usb0: usb-phy@0 {
 				reg = <0>;
 				#phy-cells = <1>;
 			};
-			usb2: usb-channel@2 {
+			usb2: usb-phy@2 {
 				reg = <2>;
 				#phy-cells = <1>;
 			};
diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi
index f5d4b8b85b6d..96b2d5a4e8f6 100644
--- a/arch/arm/boot/dts/r8a7744.dtsi
+++ b/arch/arm/boot/dts/r8a7744.dtsi
@@ -140,6 +140,7 @@
 			compatible = "renesas,r8a7744-wdt",
 				     "renesas,rcar-gen2-wdt";
 			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 402>;
 			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
 			resets = <&cpg 402>;
@@ -583,7 +584,7 @@
 			status = "disabled";
 		};
 
-		usbphy: usb-phy@e6590100 {
+		usbphy: usb-phy-controller@e6590100 {
 			compatible = "renesas,usb-phy-r8a7744",
 				     "renesas,rcar-gen2-usb-phy";
 			reg = <0 0xe6590100 0 0x100>;
@@ -595,11 +596,11 @@
 			resets = <&cpg 704>;
 			status = "disabled";
 
-			usb0: usb-channel@0 {
+			usb0: usb-phy@0 {
 				reg = <0>;
 				#phy-cells = <1>;
 			};
-			usb2: usb-channel@2 {
+			usb2: usb-phy@2 {
 				reg = <2>;
 				#phy-cells = <1>;
 			};
diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index f877c51f769c..afc902e532d8 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -270,6 +270,7 @@
 		rwdt: watchdog@e6020000 {
 			compatible = "renesas,r8a7745-wdt",
 				     "renesas,rcar-gen2-wdt";
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0 0xe6020000 0 0x0c>;
 			clocks = <&cpg CPG_MOD 402>;
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
@@ -524,7 +525,7 @@
 			status = "disabled";
 		};
 
-		usbphy: usb-phy@e6590100 {
+		usbphy: usb-phy-controller@e6590100 {
 			compatible = "renesas,usb-phy-r8a7745",
 				     "renesas,rcar-gen2-usb-phy";
 			reg = <0 0xe6590100 0 0x100>;
@@ -536,11 +537,11 @@
 			resets = <&cpg 704>;
 			status = "disabled";
 
-			usb0: usb-channel@0 {
+			usb0: usb-phy@0 {
 				reg = <0>;
 				#phy-cells = <1>;
 			};
-			usb2: usb-channel@2 {
+			usb2: usb-phy@2 {
 				reg = <2>;
 				#phy-cells = <1>;
 			};
diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
index b024621c9981..644802285249 100644
--- a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
+++ b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
@@ -116,7 +116,7 @@
 };
 
 &gpio2 {
-	interrupt-fixup {
+	interrupt-fixup-hog {
 		gpio-hog;
 		gpios = <29 GPIO_ACTIVE_HIGH>;
 		line-name = "hdmi-hpd-int";
diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi
index 13ef1e9bf4d5..a5cf663a0118 100644
--- a/arch/arm/boot/dts/r8a77470.dtsi
+++ b/arch/arm/boot/dts/r8a77470.dtsi
@@ -91,6 +91,7 @@
 			compatible = "renesas,r8a77470-wdt",
 				     "renesas,rcar-gen2-wdt";
 			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 402>;
 			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
 			resets = <&cpg 402>;
@@ -356,7 +357,7 @@
 			status = "disabled";
 		};
 
-		usbphy0: usb-phy@e6590100 {
+		usbphy0: usb-phy-controller@e6590100 {
 			compatible = "renesas,usb-phy-r8a77470",
 				     "renesas,rcar-gen2-usb-phy";
 			reg = <0 0xe6590100 0 0x100>;
@@ -368,7 +369,7 @@
 			resets = <&cpg 704>;
 			status = "disabled";
 
-			usb0: usb-channel@0 {
+			usb0: usb-phy@0 {
 				reg = <0>;
 				#phy-cells = <1>;
 			};
@@ -392,7 +393,7 @@
 			status = "disabled";
 		};
 
-		usbphy1: usb-phy@e6598100 {
+		usbphy1: usb-phy-controller@e6598100 {
 			compatible = "renesas,usb-phy-r8a77470",
 				     "renesas,rcar-gen2-usb-phy";
 			reg = <0 0xe6598100 0 0x100>;
@@ -404,7 +405,7 @@
 			resets = <&cpg 706>;
 			status = "disabled";
 
-			usb1: usb-channel@0 {
+			usb1: usb-phy@0 {
 				reg = <0>;
 				#phy-cells = <1>;
 			};
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 57cd2fa72249..5ad5349a50dc 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -442,7 +442,7 @@
 				compatible = "dlg,da9063-rtc";
 			};
 
-			wdt {
+			watchdog {
 				compatible = "dlg,da9063-watchdog";
 			};
 		};
diff --git a/arch/arm/boot/dts/r8a7790-stout.dts b/arch/arm/boot/dts/r8a7790-stout.dts
index c802f9f13c18..fe14727eefe1 100644
--- a/arch/arm/boot/dts/r8a7790-stout.dts
+++ b/arch/arm/boot/dts/r8a7790-stout.dts
@@ -341,7 +341,7 @@
 			compatible = "dlg,da9063-rtc";
 		};
 
-		wdt {
+		watchdog {
 			compatible = "dlg,da9063-watchdog";
 		};
 	};
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index ed6dd4fcc503..db171e3c62f2 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -274,6 +274,7 @@
 			compatible = "renesas,r8a7790-wdt",
 				     "renesas,rcar-gen2-wdt";
 			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 402>;
 			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 			resets = <&cpg 402>;
@@ -653,7 +654,7 @@
 			status = "disabled";
 		};
 
-		usbphy: usb-phy@e6590100 {
+		usbphy: usb-phy-controller@e6590100 {
 			compatible = "renesas,usb-phy-r8a7790",
 				     "renesas,rcar-gen2-usb-phy";
 			reg = <0 0xe6590100 0 0x100>;
@@ -665,11 +666,11 @@
 			resets = <&cpg 704>;
 			status = "disabled";
 
-			usb0: usb-channel@0 {
+			usb0: usb-phy@0 {
 				reg = <0>;
 				#phy-cells = <1>;
 			};
-			usb2: usb-channel@2 {
+			usb2: usb-phy@2 {
 				reg = <2>;
 				#phy-cells = <1>;
 			};
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 6e691b6cac05..26a40782cc89 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -805,7 +805,7 @@
 			compatible = "dlg,da9063-rtc";
 		};
 
-		wdt {
+		watchdog {
 			compatible = "dlg,da9063-watchdog";
 		};
 	};
diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
index 38e2ab928707..ec0a20d5130d 100644
--- a/arch/arm/boot/dts/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -390,7 +390,7 @@
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 
-		wdt {
+		watchdog {
 			compatible = "dlg,da9063-watchdog";
 		};
 	};
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 0ccc162d3c2c..d8f91d9f42ae 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -161,6 +161,7 @@
 			compatible = "renesas,r8a7791-wdt",
 				     "renesas,rcar-gen2-wdt";
 			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 402>;
 			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 			resets = <&cpg 402>;
@@ -607,7 +608,7 @@
 			status = "disabled";
 		};
 
-		usbphy: usb-phy@e6590100 {
+		usbphy: usb-phy-controller@e6590100 {
 			compatible = "renesas,usb-phy-r8a7791",
 				     "renesas,rcar-gen2-usb-phy";
 			reg = <0 0xe6590100 0 0x100>;
@@ -619,11 +620,11 @@
 			resets = <&cpg 704>;
 			status = "disabled";
 
-			usb0: usb-channel@0 {
+			usb0: usb-phy@0 {
 				reg = <0>;
 				#phy-cells = <1>;
 			};
-			usb2: usb-channel@2 {
+			usb2: usb-phy@2 {
 				reg = <2>;
 				#phy-cells = <1>;
 			};
diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts b/arch/arm/boot/dts/r8a7792-blanche.dts
index 62aa9f61321b..c66de9dd12df 100644
--- a/arch/arm/boot/dts/r8a7792-blanche.dts
+++ b/arch/arm/boot/dts/r8a7792-blanche.dts
@@ -335,7 +335,7 @@
 			compatible = "dlg,da9063-rtc";
 		};
 
-		wdt {
+		watchdog {
 			compatible = "dlg,da9063-watchdog";
 		};
 	};
diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi
index 9cdb73894ac2..a6d9367f8fa0 100644
--- a/arch/arm/boot/dts/r8a7792.dtsi
+++ b/arch/arm/boot/dts/r8a7792.dtsi
@@ -111,6 +111,7 @@
 			compatible = "renesas,r8a7792-wdt",
 				     "renesas,rcar-gen2-wdt";
 			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 402>;
 			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
 			resets = <&cpg 402>;
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index c8978f4f62e9..79b537b24642 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -740,7 +740,7 @@
 			compatible = "dlg,da9063-rtc";
 		};
 
-		wdt {
+		watchdog {
 			compatible = "dlg,da9063-watchdog";
 		};
 	};
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index dea4b1e108af..9ebe7bfaf0ed 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -146,6 +146,7 @@
 			compatible = "renesas,r8a7793-wdt",
 				     "renesas,rcar-gen2-wdt";
 			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 402>;
 			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
 			resets = <&cpg 402>;
diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index 99d554fe3329..4d93319674c6 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -463,7 +463,7 @@
 			compatible = "dlg,da9063-rtc";
 		};
 
-		wdt {
+		watchdog {
 			compatible = "dlg,da9063-watchdog";
 		};
 	};
diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts
index 92a76164432a..b7af1befa126 100644
--- a/arch/arm/boot/dts/r8a7794-silk.dts
+++ b/arch/arm/boot/dts/r8a7794-silk.dts
@@ -433,7 +433,7 @@
 			compatible = "dlg,da9063-rtc";
 		};
 
-		wdt {
+		watchdog {
 			compatible = "dlg,da9063-watchdog";
 		};
 	};
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index eac9ed8df0be..7aa781ff3bff 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -128,6 +128,7 @@
 			compatible = "renesas,r8a7794-wdt",
 				     "renesas,rcar-gen2-wdt";
 			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 402>;
 			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 			resets = <&cpg 402>;
@@ -505,7 +506,7 @@
 			status = "disabled";
 		};
 
-		usbphy: usb-phy@e6590100 {
+		usbphy: usb-phy-controller@e6590100 {
 			compatible = "renesas,usb-phy-r8a7794",
 				     "renesas,rcar-gen2-usb-phy";
 			reg = <0 0xe6590100 0 0x100>;
@@ -517,11 +518,11 @@
 			resets = <&cpg 704>;
 			status = "disabled";
 
-			usb0: usb-channel@0 {
+			usb0: usb-phy@0 {
 				reg = <0>;
 				#phy-cells = <1>;
 			};
-			usb2: usb-channel@2 {
+			usb2: usb-phy@2 {
 				reg = <2>;
 				#phy-cells = <1>;
 			};
diff --git a/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi b/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi
deleted file mode 100644
index 79fce67ebb1c..000000000000
--- a/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi
+++ /dev/null
@@ -1,39 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Common file for the AA104XD12 panel connected to Renesas R-Car boards
- *
- * Copyright (C) 2014 Renesas Electronics Corp.
- */
-
-/ {
-	panel {
-		compatible = "mitsubishi,aa104xd12", "panel-lvds";
-
-		width-mm = <210>;
-		height-mm = <158>;
-		data-mapping = "jeida-18";
-
-		panel-timing {
-			/* 1024x768 @65Hz */
-			clock-frequency = <65000000>;
-			hactive = <1024>;
-			vactive = <768>;
-			hsync-len = <136>;
-			hfront-porch = <20>;
-			hback-porch = <160>;
-			vfront-porch = <3>;
-			vback-porch = <29>;
-			vsync-len = <6>;
-		};
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds_connector>;
-			};
-		};
-	};
-};
-
-&lvds_connector {
-	remote-endpoint = <&panel_in>;
-};
diff --git a/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts b/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts
index 4e57ae2688fc..c18bbd7141c4 100644
--- a/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts
+++ b/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts
@@ -8,6 +8,9 @@
 
 /dts-v1/;
 
+#include <dt-bindings/pinctrl/rzn1-pinctrl.h>
+#include <dt-bindings/net/pcs-rzn1-miic.h>
+
 #include "r9a06g032.dtsi"
 
 / {
@@ -23,6 +26,155 @@
 	};
 };
 
+&can0 {
+	pinctrl-0 = <&pins_can0>;
+	pinctrl-names = "default";
+
+	/* Assuming CN10/CN11 are wired for CAN1 */
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-0 = <&pins_can1>;
+	pinctrl-names = "default";
+
+	/* Please only enable can0 or can1, depending on CN10/CN11 */
+	/* status = "okay"; */
+};
+
+&eth_miic {
+	status = "okay";
+	renesas,miic-switch-portin = <MIIC_GMAC2_PORT>;
+};
+
+&gmac2 {
+	status = "okay";
+	phy-mode = "gmii";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&mii_conv4 {
+	renesas,miic-input = <MIIC_SWITCH_PORTB>;
+	status = "okay";
+};
+
+&mii_conv5 {
+	renesas,miic-input = <MIIC_SWITCH_PORTA>;
+	status = "okay";
+};
+
+&pinctrl{
+	pins_can0: pins_can0 {
+		pinmux = <RZN1_PINMUX(162, RZN1_FUNC_CAN)>,	/* CAN0_TXD */
+			 <RZN1_PINMUX(163, RZN1_FUNC_CAN)>;	/* CAN0_RXD */
+		drive-strength = <6>;
+	};
+
+	pins_can1: pins_can1 {
+		pinmux = <RZN1_PINMUX(109, RZN1_FUNC_CAN)>,	/* CAN1_TXD */
+			 <RZN1_PINMUX(110, RZN1_FUNC_CAN)>;	/* CAN1_RXD */
+		drive-strength = <6>;
+	};
+
+	pins_eth3: pins_eth3 {
+		pinmux = <RZN1_PINMUX(36, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(37, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(38, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(39, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(40, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(41, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(42, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(43, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(44, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(45, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(46, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(47, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>;
+		drive-strength = <6>;
+		bias-disable;
+	};
+
+	pins_eth4: pins_eth4 {
+		pinmux = <RZN1_PINMUX(48, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(49, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(50, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(51, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(52, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(53, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(54, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(55, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(56, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(57, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(58, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(59, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>;
+		drive-strength = <6>;
+		bias-disable;
+	};
+
+	pins_mdio1: pins_mdio1 {
+		pinmux = <RZN1_PINMUX(152, RZN1_FUNC_MDIO1_SWITCH)>,
+			 <RZN1_PINMUX(153, RZN1_FUNC_MDIO1_SWITCH)>;
+	};
+};
+
+&rtc0 {
+	status = "okay";
+};
+
+&switch {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_eth3>, <&pins_eth4>, <&pins_mdio1>;
+
+	dsa,member = <0 0>;
+
+	mdio {
+		clock-frequency = <2500000>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch0phy4: ethernet-phy@4 {
+			reg = <4>;
+			micrel,led-mode = <1>;
+		};
+
+		switch0phy5: ethernet-phy@5 {
+			reg = <5>;
+			micrel,led-mode = <1>;
+		};
+	};
+};
+
+&switch_port0 {
+	label = "lan0";
+	phy-mode = "mii";
+	phy-handle = <&switch0phy5>;
+	status = "okay";
+};
+
+&switch_port1 {
+	label = "lan1";
+	phy-mode = "mii";
+	phy-handle = <&switch0phy4>;
+	status = "okay";
+};
+
+&switch_port4 {
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };
+
+&wdt0 {
+	timeout-sec = <60>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/r9a06g032.dtsi
index c47896e4ab58..563024c9a4ae 100644
--- a/arch/arm/boot/dts/r9a06g032.dtsi
+++ b/arch/arm/boot/dts/r9a06g032.dtsi
@@ -66,15 +66,96 @@
 		interrupt-parent = <&gic>;
 		ranges;
 
+		rtc0: rtc@40006000 {
+			compatible = "renesas,r9a06g032-rtc", "renesas,rzn1-rtc";
+			reg = <0x40006000 0x1000>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 67 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "alarm", "timer", "pps";
+			clocks = <&sysctrl R9A06G032_HCLK_RTC>;
+			clock-names = "hclk";
+			power-domains = <&sysctrl>;
+			status = "disabled";
+		};
+
+		wdt0: watchdog@40008000 {
+			compatible = "renesas,r9a06g032-wdt", "renesas,rzn1-wdt";
+			reg = <0x40008000 0x1000>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&sysctrl R9A06G032_CLK_WATCHDOG>;
+			status = "disabled";
+		};
+
+		wdt1: watchdog@40009000 {
+			compatible = "renesas,r9a06g032-wdt", "renesas,rzn1-wdt";
+			reg = <0x40009000 0x1000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&sysctrl R9A06G032_CLK_WATCHDOG>;
+			status = "disabled";
+		};
+
 		sysctrl: system-controller@4000c000 {
 			compatible = "renesas,r9a06g032-sysctrl";
 			reg = <0x4000c000 0x1000>;
 			status = "okay";
 			#clock-cells = <1>;
+			#power-domain-cells = <0>;
 
 			clocks = <&ext_mclk>, <&ext_rtc_clk>,
 					<&ext_jtag_clk>, <&ext_rgmii_ref>;
 			clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			dmamux: dma-router@a0 {
+				compatible = "renesas,rzn1-dmamux";
+				reg = <0xa0 4>;
+				#dma-cells = <6>;
+				dma-requests = <32>;
+				dma-masters = <&dma0 &dma1>;
+			};
+		};
+
+		pci_usb: pci@40030000 {
+			compatible = "renesas,pci-r9a06g032", "renesas,pci-rzn1";
+			device_type = "pci";
+			clocks = <&sysctrl R9A06G032_HCLK_USBH>,
+				 <&sysctrl R9A06G032_HCLK_USBPM>,
+				 <&sysctrl R9A06G032_CLK_PCI_USB>;
+			clock-names = "hclkh", "hclkpm", "pciclk";
+			power-domains = <&sysctrl>;
+			reg = <0x40030000 0xc00>,
+			      <0x40020000 0x1100>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+
+			bus-range = <0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges = <0x02000000 0 0x40020000 0x40020000 0 0x00010000>;
+			/* Should map all possible DDR as inbound ranges, but
+			 * the IP only supports a 256MB, 512MB, or 1GB window.
+			 * flags, PCI addr (64-bit), CPU addr, PCI size (64-bit)
+			 */
+			dma-ranges = <0x42000000 0 0x80000000 0x80000000 0 0x40000000>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH
+					 0x0800 0 0 1 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH
+					 0x1000 0 0 2 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+
+			usb@1,0 {
+				reg = <0x800 0 0 0 0>;
+				phys = <&usbphy>;
+				phy-names = "usb";
+			};
+
+			usb@2,0 {
+				reg = <0x1000 0 0 0 0>;
+				phys = <&usbphy>;
+				phy-names = "usb";
+			};
 		};
 
 		uart0: serial@40060000 {
@@ -118,6 +199,8 @@
 			reg-io-width = <4>;
 			clocks = <&sysctrl R9A06G032_CLK_UART3>, <&sysctrl R9A06G032_HCLK_UART3>;
 			clock-names = "baudclk", "apb_pclk";
+			dmas =  <&dmamux 0 0 0 0 0 1>, <&dmamux 1 0 0 0 1 1>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -129,6 +212,8 @@
 			reg-io-width = <4>;
 			clocks = <&sysctrl R9A06G032_CLK_UART4>, <&sysctrl R9A06G032_HCLK_UART4>;
 			clock-names = "baudclk", "apb_pclk";
+			dmas =  <&dmamux 2 0 0 0 2 1>, <&dmamux 3 0 0 0 3 1>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -140,6 +225,8 @@
 			reg-io-width = <4>;
 			clocks = <&sysctrl R9A06G032_CLK_UART5>, <&sysctrl R9A06G032_HCLK_UART5>;
 			clock-names = "baudclk", "apb_pclk";
+			dmas =  <&dmamux 4 0 0 0 4 1>, <&dmamux 5 0 0 0 5 1>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -151,6 +238,8 @@
 			reg-io-width = <4>;
 			clocks = <&sysctrl R9A06G032_CLK_UART6>, <&sysctrl R9A06G032_HCLK_UART6>;
 			clock-names = "baudclk", "apb_pclk";
+			dmas =  <&dmamux 6 0 0 0 6 1>, <&dmamux 7 0 0 0 7 1>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -162,6 +251,8 @@
 			reg-io-width = <4>;
 			clocks = <&sysctrl R9A06G032_CLK_UART7>, <&sysctrl R9A06G032_HCLK_UART7>;
 			clock-names = "baudclk", "apb_pclk";
+			dmas =  <&dmamux 4 0 0 0 20 1>, <&dmamux 5 0 0 0 21 1>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -173,6 +264,154 @@
 			status = "okay";
 		};
 
+		nand_controller: nand-controller@40102000 {
+			compatible = "renesas,r9a06g032-nandc", "renesas,rzn1-nandc";
+			reg = <0x40102000 0x2000>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sysctrl R9A06G032_HCLK_NAND>, <&sysctrl R9A06G032_CLK_NAND>;
+			clock-names = "hclk", "eclk";
+			power-domains = <&sysctrl>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		dma0: dma-controller@40104000 {
+			compatible = "renesas,r9a06g032-dma", "renesas,rzn1-dma";
+			reg = <0x40104000 0x1000>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "hclk";
+			clocks = <&sysctrl R9A06G032_HCLK_DMA0>;
+			dma-channels = <8>;
+			dma-requests = <16>;
+			dma-masters = <1>;
+			#dma-cells = <3>;
+			block_size = <0xfff>;
+			data-width = <8>;
+		};
+
+		dma1: dma-controller@40105000 {
+			compatible = "renesas,r9a06g032-dma", "renesas,rzn1-dma";
+			reg = <0x40105000 0x1000>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "hclk";
+			clocks = <&sysctrl R9A06G032_HCLK_DMA1>;
+			dma-channels = <8>;
+			dma-requests = <16>;
+			dma-masters = <1>;
+			#dma-cells = <3>;
+			block_size = <0xfff>;
+			data-width = <8>;
+		};
+
+		gmac2: ethernet@44002000 {
+			compatible = "renesas,r9a06g032-gmac", "renesas,rzn1-gmac", "snps,dwmac";
+			reg = <0x44002000 0x2000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+			clocks = <&sysctrl R9A06G032_HCLK_GMAC1>;
+			clock-names = "stmmaceth";
+			power-domains = <&sysctrl>;
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <128>;
+			tx-fifo-depth = <2048>;
+			rx-fifo-depth = <4096>;
+			status = "disabled";
+		};
+
+		eth_miic: eth-miic@44030000 {
+			compatible = "renesas,r9a06g032-miic", "renesas,rzn1-miic";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x44030000 0x10000>;
+			clocks = <&sysctrl R9A06G032_CLK_MII_REF>,
+				 <&sysctrl R9A06G032_CLK_RGMII_REF>,
+				 <&sysctrl R9A06G032_CLK_RMII_REF>,
+				 <&sysctrl R9A06G032_HCLK_SWITCH_RG>;
+			clock-names = "mii_ref", "rgmii_ref", "rmii_ref", "hclk";
+			power-domains = <&sysctrl>;
+			status = "disabled";
+
+			mii_conv1: mii-conv@1 {
+				reg = <1>;
+				status = "disabled";
+			};
+
+			mii_conv2: mii-conv@2 {
+				reg = <2>;
+				status = "disabled";
+			};
+
+			mii_conv3: mii-conv@3 {
+				reg = <3>;
+				status = "disabled";
+			};
+
+			mii_conv4: mii-conv@4 {
+				reg = <4>;
+				status = "disabled";
+			};
+
+			mii_conv5: mii-conv@5 {
+				reg = <5>;
+				status = "disabled";
+			};
+		};
+
+		switch: switch@44050000 {
+			compatible = "renesas,r9a06g032-a5psw", "renesas,rzn1-a5psw";
+			reg = <0x44050000 0x10000>;
+			clocks = <&sysctrl R9A06G032_HCLK_SWITCH>,
+				 <&sysctrl R9A06G032_CLK_SWITCH>;
+			clock-names = "hclk", "clk";
+			power-domains = <&sysctrl>;
+			status = "disabled";
+
+			ethernet-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				switch_port0: port@0 {
+					reg = <0>;
+					pcs-handle = <&mii_conv5>;
+					status = "disabled";
+				};
+
+				switch_port1: port@1 {
+					reg = <1>;
+					pcs-handle = <&mii_conv4>;
+					status = "disabled";
+				};
+
+				switch_port2: port@2 {
+					reg = <2>;
+					pcs-handle = <&mii_conv3>;
+					status = "disabled";
+				};
+
+				switch_port3: port@3 {
+					reg = <3>;
+					pcs-handle = <&mii_conv2>;
+					status = "disabled";
+				};
+
+				switch_port4: port@4 {
+					reg = <4>;
+					ethernet = <&gmac2>;
+					label = "cpu";
+					phy-mode = "internal";
+					status = "disabled";
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+			};
+		};
+
 		gic: interrupt-controller@44101000 {
 			compatible = "arm,gic-400", "arm,cortex-a7-gic";
 			interrupt-controller;
@@ -184,11 +423,30 @@
 			interrupts =
 				<GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
+
+		can0: can@52104000 {
+			compatible = "renesas,r9a06g032-sja1000","renesas,rzn1-sja1000";
+			reg = <0x52104000 0x800>;
+			reg-io-width = <4>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sysctrl R9A06G032_HCLK_CAN0>;
+			power-domains = <&sysctrl>;
+			status = "disabled";
+		};
+
+		can1: can@52105000 {
+			compatible = "renesas,r9a06g032-sja1000", "renesas,rzn1-sja1000";
+			reg = <0x52105000 0x800>;
+			reg-io-width = <4>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sysctrl R9A06G032_HCLK_CAN1>;
+			power-domains = <&sysctrl>;
+			status = "disabled";
+		};
 	};
 
 	timer {
-		compatible = "arm,cortex-a7-timer",
-			     "arm,armv7-timer";
+		compatible = "arm,armv7-timer";
 		interrupt-parent = <&gic>;
 		arm,cpu-registers-not-fw-configured;
 		always-on;
@@ -198,4 +456,10 @@
 			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
 	};
+
+	usbphy: usb-phy {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+		status = "disabled";
+	};
 };
diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts
index 2a7e6624efb9..becdc0b664bf 100644
--- a/arch/arm/boot/dts/rk3036-evb.dts
+++ b/arch/arm/boot/dts/rk3036-evb.dts
@@ -15,27 +15,30 @@
 };
 
 &emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
 	phy = <&phy0>;
-	phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */
 	phy-reset-duration = <10>; /* millisecond */
-
+	phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
 	status = "okay";
 
-	phy0: ethernet-phy@0 {
-		reg = <0>;
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
 	};
 };
 
 &i2c1 {
 	status = "okay";
 
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "xin32k";
 	};
 };
diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts
index e817eba8c622..67e1e04139e7 100644
--- a/arch/arm/boot/dts/rk3036-kylin.dts
+++ b/arch/arm/boot/dts/rk3036-kylin.dts
@@ -80,16 +80,20 @@
 };
 
 &emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
 	phy = <&phy0>;
-	phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */
 	phy-reset-duration = <10>; /* millisecond */
-
+	phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
 	status = "okay";
 
-	phy0: ethernet-phy@0 {
-		reg = <0>;
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index ba2b8891bbb7..78686fc72ce6 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -225,11 +225,9 @@
 	};
 
 	emac: ethernet@10200000 {
-		compatible = "rockchip,rk3036-emac", "snps,arc-emac";
+		compatible = "rockchip,rk3036-emac";
 		reg = <0x10200000 0x4000>;
 		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 		rockchip,grf = <&grf>;
 		clocks = <&cru HCLK_MAC>, <&cru SCLK_MACREF>, <&cru SCLK_MAC>;
 		clock-names = "hclk", "macref", "macclk";
@@ -330,6 +328,8 @@
 	cru: clock-controller@20000000 {
 		compatible = "rockchip,rk3036-cru";
 		reg = <0x20000000 0x1000>;
+		clocks = <&xin24m>;
+		clock-names = "xin24m";
 		rockchip,grf = <&grf>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
@@ -556,7 +556,7 @@
 		status = "disabled";
 	};
 
-	pdma: pdma@20078000 {
+	pdma: dma-controller@20078000 {
 		compatible = "arm,pl330", "arm,primecell";
 		reg = <0x20078000 0x4000>;
 		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
@@ -614,7 +614,7 @@
 			#interrupt-cells = <2>;
 		};
 
-		pcfg_pull_default: pcfg_pull_default {
+		pcfg_pull_default: pcfg-pull-default {
 			bias-pull-pin-default;
 		};
 
diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
index 390aa33cd55a..962b4d1291db 100644
--- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts
+++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
@@ -48,7 +48,7 @@
 		compatible = "gpio-keys";
 		autorepeat;
 
-		power {
+		key-power {
 			gpios = <&gpio6 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */
 			linux,code = <KEY_POWER>;
 			label = "GPIO Key Power";
@@ -56,7 +56,7 @@
 			wakeup-source;
 			debounce-interval = <100>;
 		};
-		volume-down {
+		key-volume-down {
 			gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */
 			linux,code = <KEY_VOLUMEDOWN>;
 			label = "GPIO Key Vol-";
diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts b/arch/arm/boot/dts/rk3066a-marsboard.dts
index a66d915aa0f6..8beecd628282 100644
--- a/arch/arm/boot/dts/rk3066a-marsboard.dts
+++ b/arch/arm/boot/dts/rk3066a-marsboard.dts
@@ -150,18 +150,21 @@
 #include "tps65910.dtsi"
 
 &emac {
-	status = "okay";
-
 	phy = <&phy0>;
 	phy-supply = <&vcc_rmii>;
-
 	pinctrl-names = "default";
 	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/rk3066a-mk808.dts b/arch/arm/boot/dts/rk3066a-mk808.dts
index 667d57a4ff45..2db5ba706208 100644
--- a/arch/arm/boot/dts/rk3066a-mk808.dts
+++ b/arch/arm/boot/dts/rk3066a-mk808.dts
@@ -32,7 +32,7 @@
 		keyup-threshold-microvolt = <2500000>;
 		poll-interval = <100>;
 
-		recovery {
+		button-recovery {
 			label = "recovery";
 			linux,code = <KEY_VENDOR>;
 			press-threshold-microvolt = <0>;
@@ -160,6 +160,24 @@
 	status = "okay";
 };
 
+&nfc {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "rk-nand";
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-step-size = <1024>;
+		nand-ecc-strength = <40>;
+		nand-is-boot-medium;
+		rockchip,boot-blks = <8>;
+		rockchip,boot-ecc-strength = <24>;
+	};
+};
+
 &pinctrl {
 	usb-host {
 		host_drv: host-drv {
diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts
index 12b2e59aebc4..3eee42137b6d 100644
--- a/arch/arm/boot/dts/rk3066a-rayeager.dts
+++ b/arch/arm/boot/dts/rk3066a-rayeager.dts
@@ -32,7 +32,7 @@
 	keys: gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			wakeup-source;
 			gpios = <&gpio6 RK_PA2 GPIO_ACTIVE_LOW>;
 			label = "GPIO Power";
@@ -142,15 +142,20 @@
 };
 
 &emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&rmii_rst>;
 	phy = <&phy0>;
 	phy-supply = <&vcc_rmii>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&rmii_rst>;
 	status = "okay";
 
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-		reset-gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>;
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+			reset-gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index c25b9695db4b..de9915d946f7 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -202,8 +202,9 @@
 	cru: clock-controller@20000000 {
 		compatible = "rockchip,rk3066a-cru";
 		reg = <0x20000000 0x1000>;
+		clocks = <&xin24m>;
+		clock-names = "xin24m";
 		rockchip,grf = <&grf>;
-
 		#clock-cells = <1>;
 		#reset-cells = <1>;
 		assigned-clocks = <&cru PLL_CPLL>, <&cru PLL_GPLL>,
diff --git a/arch/arm/boot/dts/rk3188-bqedison2qc.dts b/arch/arm/boot/dts/rk3188-bqedison2qc.dts
index 85d3fce0142f..9312be362a7a 100644
--- a/arch/arm/boot/dts/rk3188-bqedison2qc.dts
+++ b/arch/arm/boot/dts/rk3188-bqedison2qc.dts
@@ -7,6 +7,7 @@
 /dts-v1/;
 #include <dt-bindings/i2c/i2c.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include "rk3188.dtsi"
 
 / {
@@ -36,7 +37,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwr_key &usb_int>;
 
-		power {
+		key-power {
 			gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			label = "GPIO Key Power";
@@ -45,7 +46,7 @@
 			wakeup-source;
 		};
 
-		wake_on_usb: wake-on-usb {
+		wake_on_usb: key-wake-on-usb {
 			label = "Wake-on-USB";
 			gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WAKEUP>;
@@ -485,7 +486,7 @@
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&gpio3>;
-		interrupts = <RK_PD2 GPIO_ACTIVE_HIGH>;
+		interrupts = <RK_PD2 IRQ_TYPE_NONE>;
 		interrupt-names = "host-wake";
 		brcm,drive-strength = <5>;
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts b/arch/arm/boot/dts/rk3188-px3-evb.dts
index 39c60426c9c9..0a1ae689b162 100644
--- a/arch/arm/boot/dts/rk3188-px3-evb.dts
+++ b/arch/arm/boot/dts/rk3188-px3-evb.dts
@@ -29,7 +29,7 @@
 		compatible = "gpio-keys";
 		autorepeat;
 
-		power {
+		key-power {
 			gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			label = "GPIO Key Power";
@@ -212,7 +212,7 @@
 				regulator-name = "wl_18";
 			};
 
-			lcd_33: SWITCH_REG1 {
+			lcd_33: SWITCH_REG {
 				regulator-name = "lcd_33";
 			};
 		};
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index 36c0945f43b2..118deacd38c4 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -24,7 +24,7 @@
 		compatible = "gpio-keys";
 		autorepeat;
 
-		power {
+		key-power {
 			gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			label = "GPIO Key Power";
@@ -71,7 +71,7 @@
 		#sound-dai-cells = <0>;
 	};
 
-	ir_recv: gpio-ir-receiver {
+	ir_recv: ir-receiver {
 		compatible = "gpio-ir-receiver";
 		gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
@@ -126,18 +126,21 @@
 };
 
 &emac {
-	status = "okay";
-
+	phy = <&phy0>;
+	phy-supply = <&vcc_rmii>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
+	status = "okay";
 
-	phy = <&phy0>;
-	phy-supply = <&vcc_rmii>;
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index a94321e90014..44b54af0bbf9 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -195,8 +195,9 @@
 	cru: clock-controller@20000000 {
 		compatible = "rockchip,rk3188-cru";
 		reg = <0x20000000 0x1000>;
+		clocks = <&xin24m>;
+		clock-names = "xin24m";
 		rockchip,grf = <&grf>;
-
 		#clock-cells = <1>;
 		#reset-cells = <1>;
 	};
@@ -378,7 +379,7 @@
 				rockchip,pins = <2 RK_PD3 1 &pcfg_pull_none>;
 			};
 
-			lcdc1_rgb24: ldcd1-rgb24 {
+			lcdc1_rgb24: lcdc1-rgb24 {
 				rockchip,pins = <2 RK_PA0 1 &pcfg_pull_none>,
 						<2 RK_PA1 1 &pcfg_pull_none>,
 						<2 RK_PA2 1 &pcfg_pull_none>,
@@ -606,7 +607,6 @@
 
 &global_timer {
 	interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
-	status = "disabled";
 };
 
 &local_timer {
diff --git a/arch/arm/boot/dts/rk3229-evb.dts b/arch/arm/boot/dts/rk3229-evb.dts
index 797476e8bef1..5c3d08e3eea3 100644
--- a/arch/arm/boot/dts/rk3229-evb.dts
+++ b/arch/arm/boot/dts/rk3229-evb.dts
@@ -107,7 +107,7 @@
 		regulator-boot-on;
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 		autorepeat;
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index 8eed9e3a92e9..ffc16d6b97e1 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -484,6 +484,8 @@
 	cru: clock-controller@110e0000 {
 		compatible = "rockchip,rk3228-cru";
 		reg = <0x110e0000 0x1000>;
+		clocks = <&xin24m>;
+		clock-names = "xin24m";
 		rockchip,grf = <&grf>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
@@ -501,7 +503,7 @@
 			<75000000>;
 	};
 
-	pdma: pdma@110f0000 {
+	pdma: dma-controller@110f0000 {
 		compatible = "arm,pl330", "arm,primecell";
 		reg = <0x110f0000 0x4000>;
 		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
@@ -718,8 +720,8 @@
 		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 		assigned-clocks = <&cru SCLK_HDMI_PHY>;
 		assigned-clock-parents = <&hdmi_phy>;
-		clocks = <&cru SCLK_HDMI_HDCP>, <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_CEC>;
-		clock-names = "isfr", "iahb", "cec";
+		clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>, <&cru SCLK_HDMI_CEC>;
+		clock-names = "iahb", "isfr", "cec";
 		pinctrl-names = "default";
 		pinctrl-0 = <&hdmii2c_xfer &hdmi_hpd &hdmi_cec>;
 		resets = <&cru SRST_HDMI_P>;
diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts
index be695b8c1f67..8a635c243127 100644
--- a/arch/arm/boot/dts/rk3288-evb-act8846.dts
+++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts
@@ -54,7 +54,7 @@
 		vin-supply = <&vcc_sys>;
 	};
 
-	hym8563@51 {
+	rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index c4ca73b40d4a..382d2839cf47 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -28,19 +28,19 @@
 			press-threshold-microvolt = <300000>;
 		};
 
-		menu {
+		button-menu {
 			label = "Menu";
 			linux,code = <KEY_MENU>;
 			press-threshold-microvolt = <640000>;
 		};
 
-		esc {
+		button-esc {
 			label = "Esc";
 			linux,code = <KEY_ESC>;
 			press-threshold-microvolt = <1000000>;
 		};
 
-		home  {
+		button-home  {
 			label = "Home";
 			linux,code = <KEY_HOME>;
 			press-threshold-microvolt = <1300000>;
@@ -118,7 +118,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwrbtn>;
 
-		power {
+		key-power {
 			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			label = "GPIO Key Power";
diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rk3288-firefly-reload.dts
index 9a4a9749c405..a5a0826341e6 100644
--- a/arch/arm/boot/dts/rk3288-firefly-reload.dts
+++ b/arch/arm/boot/dts/rk3288-firefly-reload.dts
@@ -27,7 +27,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			wakeup-source;
 			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
 			label = "GPIO Power";
diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi
index 7fb582302b32..3836c61cfb76 100644
--- a/arch/arm/boot/dts/rk3288-firefly.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly.dtsi
@@ -49,7 +49,7 @@
 	keys: gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			wakeup-source;
 			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
 			label = "GPIO Power";
@@ -233,11 +233,10 @@
 		vin-supply = <&vcc_sys>;
 	};
 
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "xin32k";
 		interrupt-parent = <&gpio7>;
 		interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts
index 713f55e143c6..db1eb648e0e1 100644
--- a/arch/arm/boot/dts/rk3288-miqi.dts
+++ b/arch/arm/boot/dts/rk3288-miqi.dts
@@ -162,11 +162,10 @@
 		vin-supply = <&vcc_sys>;
 	};
 
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "xin32k";
 	};
 
diff --git a/arch/arm/boot/dts/rk3288-phycore-rdk.dts b/arch/arm/boot/dts/rk3288-phycore-rdk.dts
index 1e33859de484..1a5156951492 100644
--- a/arch/arm/boot/dts/rk3288-phycore-rdk.dts
+++ b/arch/arm/boot/dts/rk3288-phycore-rdk.dts
@@ -20,14 +20,14 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&user_button_pins>;
 
-		button@0 {
+		button-0 {
 			label = "home";
 			linux,code = <KEY_HOME>;
 			gpios = <&gpio8 0 GPIO_ACTIVE_HIGH>;
 			wakeup-source;
 		};
 
-		button@1 {
+		button-1 {
 			label = "menu";
 			linux,code = <KEY_MENU>;
 			gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts
index 8c7376d64bc4..fd90f3b8fc32 100644
--- a/arch/arm/boot/dts/rk3288-popmetal.dts
+++ b/arch/arm/boot/dts/rk3288-popmetal.dts
@@ -30,7 +30,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwrbtn>;
 
-		power {
+		key-power {
 			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			label = "GPIO Key Power";
diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts
index 55467bc30fa6..633e5a032463 100644
--- a/arch/arm/boot/dts/rk3288-r89.dts
+++ b/arch/arm/boot/dts/rk3288-r89.dts
@@ -31,7 +31,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwrbtn>;
 
-		power {
+		key-power {
 			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			label = "GPIO Key Power";
diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts
index c4d1d142d8c6..13cfdaa95cc7 100644
--- a/arch/arm/boot/dts/rk3288-rock2-square.dts
+++ b/arch/arm/boot/dts/rk3288-rock2-square.dts
@@ -28,7 +28,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
 			label = "GPIO Power";
 			linux,code = <KEY_POWER>;
@@ -165,11 +165,10 @@
 };
 
 &i2c0 {
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "xin32k";
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
index 9c1e38c54eae..09618bb7d872 100644
--- a/arch/arm/boot/dts/rk3288-tinker.dtsi
+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
@@ -26,14 +26,12 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwrbtn>;
 
-		button@0 {
+		button {
 			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			label = "GPIO Key Power";
diff --git a/arch/arm/boot/dts/rk3288-veyron-broadcom-bluetooth.dtsi b/arch/arm/boot/dts/rk3288-veyron-broadcom-bluetooth.dtsi
index a10d25ac8f7b..f9dde0eef527 100644
--- a/arch/arm/boot/dts/rk3288-veyron-broadcom-bluetooth.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron-broadcom-bluetooth.dtsi
@@ -13,10 +13,10 @@
 			    <&bt_dev_wake>;
 
 		compatible = "brcm,bcm43540-bt";
-		host-wakeup-gpios	= <&gpio4 RK_PD7 GPIO_ACTIVE_HIGH>;
-		shutdown-gpios		= <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
-		device-wakeup-gpios	= <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
-		max-speed		= <3000000>;
-		brcm,bt-pcm-int-params	= [01 02 00 01 01];
+		host-wakeup-gpios = <&gpio4 RK_PD7 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+		max-speed = <3000000>;
+		brcm,bt-pcm-int-params = [01 02 00 01 01];
 	};
 };
diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
index 05112c25176d..700bb548d6b2 100644
--- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
@@ -32,7 +32,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&ap_lid_int_l>;
 
-		lid {
+		switch-lid {
 			label = "Lid";
 			gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
 			wakeup-source;
diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
index 82fc6fba9999..dcdcc55c4098 100644
--- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
@@ -21,14 +21,14 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&volum_down_l &volum_up_l>;
 
-		volum_down {
+		key-volum-down {
 			label = "Volum_down";
 			gpios = <&gpio5 RK_PB3 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
 			debounce-interval = <100>;
 		};
 
-		volum_up {
+		key-volum-up {
 			label = "Volum_up";
 			gpios = <&gpio5 RK_PB2 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
index 4e9fdb0f722d..e2a4e6232eb5 100644
--- a/arch/arm/boot/dts/rk3288-veyron-pinky.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
@@ -45,7 +45,7 @@
 &lid_switch {
 	pinctrl-0 = <&pwr_key_h &ap_lid_int_l>;
 
-	power {
+	key-power {
 		gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
 	};
 };
diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index 54a6838d73f5..e406c8c7c7e5 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -29,7 +29,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwr_key_l>;
 
-		power {
+		key-power {
 			label = "Power";
 			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
diff --git a/arch/arm/boot/dts/rk3288-vmarc-som.dtsi b/arch/arm/boot/dts/rk3288-vmarc-som.dtsi
index 0ae2bd150e37..793951655b73 100644
--- a/arch/arm/boot/dts/rk3288-vmarc-som.dtsi
+++ b/arch/arm/boot/dts/rk3288-vmarc-som.dtsi
@@ -241,7 +241,6 @@
 		interrupt-parent = <&gpio5>;
 		interrupts = <RK_PC3 IRQ_TYPE_LEVEL_LOW>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "hym8563";
 		pinctrl-names = "default";
 		pinctrl-0 = <&hym8563_int>;
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index aaaa61875701..487b0e03d4b4 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -862,6 +862,8 @@
 	cru: clock-controller@ff760000 {
 		compatible = "rockchip,rk3288-cru";
 		reg = <0x0 0xff760000 0x0 0x1000>;
+		clocks = <&xin24m>;
+		clock-names = "xin24m";
 		rockchip,grf = <&grf>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
@@ -971,7 +973,7 @@
 		status = "disabled";
 	};
 
-	crypto: cypto-controller@ff8a0000 {
+	crypto: crypto@ff8a0000 {
 		compatible = "rockchip,rk3288-crypto";
 		reg = <0x0 0xff8a0000 0x0 0x4000>;
 		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
@@ -980,7 +982,6 @@
 		clock-names = "aclk", "hclk", "sclk", "apb_pclk";
 		resets = <&cru SRST_CRYPTO>;
 		reset-names = "crypto-rst";
-		status = "okay";
 	};
 
 	iep_mmu: iommu@ff900800 {
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index 616a828e0c6e..cb4e42ede56a 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -76,6 +76,13 @@
 		reg = <0x1013c200 0x20>;
 		interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
 		clocks = <&cru CORE_PERI>;
+		status = "disabled";
+		/* The clock source and the sched_clock provided by the arm_global_timer
+		 * on Rockchip rk3066a/rk3188 are quite unstable because their rates
+		 * depend on the CPU frequency.
+		 * Keep the arm_global_timer disabled in order to have the
+		 * DW_APB_TIMER (rk3066a) or ROCKCHIP_TIMER (rk3188) selected by default.
+		 */
 	};
 
 	local_timer: local-timer@1013c600 {
@@ -186,8 +193,6 @@
 		compatible = "snps,arc-emac";
 		reg = <0x10204000 0x3c>;
 		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		rockchip,grf = <&grf>;
 
diff --git a/arch/arm/boot/dts/rv1108-elgin-r1.dts b/arch/arm/boot/dts/rv1108-elgin-r1.dts
index f62c9f7af79d..2d9994379eb2 100644
--- a/arch/arm/boot/dts/rv1108-elgin-r1.dts
+++ b/arch/arm/boot/dts/rv1108-elgin-r1.dts
@@ -72,6 +72,7 @@
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
 		rockchip,system-power-controller;
+		#clock-cells = <0>;
 
 		vcc1-supply = <&vcc_sys>;
 		vcc2-supply = <&vcc_sys>;
@@ -82,7 +83,7 @@
 
 		regulators {
 			vdd_core: DCDC_REG1 {
-				regulator-name= "vdd_core";
+				regulator-name = "vdd_core";
 				regulator-min-microvolt = <700000>;
 				regulator-max-microvolt = <1500000>;
 				regulator-always-on;
@@ -94,7 +95,7 @@
 			};
 
 			vdd_buck2: DCDC_REG2 {
-				regulator-name= "vdd_buck2";
+				regulator-name = "vdd_buck2";
 				regulator-min-microvolt = <2200000>;
 				regulator-max-microvolt = <2200000>;
 				regulator-always-on;
@@ -105,7 +106,7 @@
 			};
 
 			vcc_ddr: DCDC_REG3 {
-				regulator-name= "vcc_ddr";
+				regulator-name = "vcc_ddr";
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
@@ -114,7 +115,7 @@
 			};
 
 			vcc_io: DCDC_REG4 {
-				regulator-name= "vcc_io";
+				regulator-name = "vcc_io";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
@@ -126,7 +127,7 @@
 			};
 
 			vdd_10: LDO_REG1 {
-				regulator-name= "vdd_10";
+				regulator-name = "vdd_10";
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
 				regulator-always-on;
@@ -137,7 +138,7 @@
 			};
 
 			vcc_18: LDO_REG2 {
-				regulator-name= "vcc_18";
+				regulator-name = "vcc_18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
@@ -148,7 +149,7 @@
 			};
 
 			vdd10_pmu: LDO_REG3 {
-				regulator-name= "vdd10_pmu";
+				regulator-name = "vdd10_pmu";
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
 				regulator-always-on;
diff --git a/arch/arm/boot/dts/rv1108-evb.dts b/arch/arm/boot/dts/rv1108-evb.dts
index fe5fc9bf75c9..ef150f4ee99d 100644
--- a/arch/arm/boot/dts/rv1108-evb.dts
+++ b/arch/arm/boot/dts/rv1108-evb.dts
@@ -85,6 +85,7 @@
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
 		rockchip,system-power-controller;
+		#clock-cells = <0>;
 
 		vcc1-supply = <&vcc_sys>;
 		vcc2-supply = <&vcc_sys>;
@@ -95,7 +96,7 @@
 
 		regulators {
 			vdd_core: DCDC_REG1 {
-				regulator-name= "vdd_core";
+				regulator-name = "vdd_core";
 				regulator-min-microvolt = <700000>;
 				regulator-max-microvolt = <1500000>;
 				regulator-always-on;
@@ -107,7 +108,7 @@
 			};
 
 			vdd_cam: DCDC_REG2 {
-				regulator-name= "vdd_cam";
+				regulator-name = "vdd_cam";
 				regulator-min-microvolt = <700000>;
 				regulator-max-microvolt = <2000000>;
 				regulator-state-mem {
@@ -116,7 +117,7 @@
 			};
 
 			vcc_ddr: DCDC_REG3 {
-				regulator-name= "vcc_ddr";
+				regulator-name = "vcc_ddr";
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
@@ -125,7 +126,7 @@
 			};
 
 			vcc_io: DCDC_REG4 {
-				regulator-name= "vcc_io";
+				regulator-name = "vcc_io";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
@@ -137,7 +138,7 @@
 			};
 
 			vdd_10: LDO_REG1 {
-				regulator-name= "vdd_10";
+				regulator-name = "vdd_10";
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
 				regulator-always-on;
@@ -148,7 +149,7 @@
 			};
 
 			vcc_18: LDO_REG2 {
-				regulator-name= "vcc_18";
+				regulator-name = "vcc_18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
@@ -159,7 +160,7 @@
 			};
 
 			vdd10_pmu: LDO_REG3 {
-				regulator-name= "vdd10_pmu";
+				regulator-name = "vdd10_pmu";
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
 				regulator-always-on;
diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi
index 448254906452..abf3006f0a84 100644
--- a/arch/arm/boot/dts/rv1108.dtsi
+++ b/arch/arm/boot/dts/rv1108.dtsi
@@ -85,24 +85,6 @@
 		#clock-cells = <0>;
 	};
 
-	amba: bus {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		pdma: pdma@102a0000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x102a0000 0x4000>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
-			#dma-cells = <1>;
-			arm,pl330-broken-no-flushp;
-			arm,pl330-periph-burst;
-			clocks = <&cru ACLK_DMAC>;
-			clock-names = "apb_pclk";
-		};
-	};
-
 	bus_intmem: sram@10080000 {
 		compatible = "mmio-sram";
 		reg = <0x10080000 0x2000>;
@@ -259,6 +241,17 @@
 		status = "disabled";
 	};
 
+	pdma: dma-controller@102a0000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x102a0000 0x4000>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+		#dma-cells = <1>;
+		arm,pl330-broken-no-flushp;
+		arm,pl330-periph-burst;
+		clocks = <&cru ACLK_DMAC>;
+		clock-names = "apb_pclk";
+	};
+
 	grf: syscon@10300000 {
 		compatible = "rockchip,rv1108-grf", "syscon", "simple-mfd";
 		reg = <0x10300000 0x1000>;
@@ -456,6 +449,8 @@
 	cru: clock-controller@20200000 {
 		compatible = "rockchip,rv1108-cru";
 		reg = <0x20200000 0x1000>;
+		clocks = <&xin24m>;
+		clock-names = "xin24m";
 		rockchip,grf = <&grf>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
@@ -753,7 +748,7 @@
 
 		gmac {
 			rmii_pins: rmii-pins {
-				rockchip,pins =	<1 RK_PC5 2 &pcfg_pull_none>,
+				rockchip,pins = <1 RK_PC5 2 &pcfg_pull_none>,
 						<1 RK_PC3 2 &pcfg_pull_none>,
 						<1 RK_PC4 2 &pcfg_pull_none>,
 						<1 RK_PB2 3 &pcfg_pull_none_drv_12ma>,
diff --git a/arch/arm/boot/dts/s3c2410-pinctrl.h b/arch/arm/boot/dts/s3c2410-pinctrl.h
new file mode 100644
index 000000000000..76b6171ae149
--- /dev/null
+++ b/arch/arm/boot/dts/s3c2410-pinctrl.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Samsung S3C2410 DTS pinctrl constants
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2022 Linaro Ltd
+ * Author: Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#ifndef __DTS_ARM_SAMSUNG_S3C2410_PINCTRL_H__
+#define __DTS_ARM_SAMSUNG_S3C2410_PINCTRL_H__
+
+#define S3C2410_PIN_FUNC_INPUT		0
+#define S3C2410_PIN_FUNC_OUTPUT		1
+#define S3C2410_PIN_FUNC_2		2
+#define S3C2410_PIN_FUNC_3		3
+
+#endif /* __DTS_ARM_SAMSUNG_S3C2410_PINCTRL_H__ */
diff --git a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
index 92439ee5d7de..3268366bd8bc 100644
--- a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
+++ b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
@@ -5,73 +5,73 @@
  * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
  */
 
-#include <dt-bindings/pinctrl/samsung.h>
+#include "s3c2410-pinctrl.h"
 
 &pinctrl_0 {
 	/*
 	 * Pin banks
 	 */
 
-	gpa: gpa {
+	gpa: gpa-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpb: gpb {
+	gpb: gpb-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpc: gpc {
+	gpc: gpc-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpd: gpd {
+	gpd: gpd-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpe: gpe {
+	gpe: gpe-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpf: gpf {
+	gpf: gpf-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpg: gpg {
+	gpg: gpg-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gph: gph {
+	gph: gph-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpj: gpj {
+	gpj: gpj-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpk: gpk {
+	gpk: gpk-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpl: gpl {
+	gpl: gpl-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpm: gpm {
+	gpm: gpm-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
@@ -80,93 +80,93 @@
 	 * Pin groups
 	 */
 
-	uart0_data: uart0-data {
+	uart0_data: uart0-data-pins {
 		samsung,pins = "gph-0", "gph-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
 	};
 
-	uart0_fctl: uart0-fctl {
+	uart0_fctl: uart0-fctl-pins {
 		samsung,pins = "gph-8", "gph-9";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
 	};
 
-	uart1_data: uart1-data {
+	uart1_data: uart1-data-pins {
 		samsung,pins = "gph-2", "gph-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
 	};
 
-	uart1_fctl: uart1-fctl {
+	uart1_fctl: uart1-fctl-pins {
 		samsung,pins = "gph-10", "gph-11";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
 	};
 
-	uart2_data: uart2-data {
+	uart2_data: uart2-data-pins {
 		samsung,pins = "gph-4", "gph-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
 	};
 
-	uart2_fctl: uart2-fctl {
+	uart2_fctl: uart2-fctl-pins {
 		samsung,pins = "gph-6", "gph-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
 	};
 
-	uart3_data: uart3-data {
+	uart3_data: uart3-data-pins {
 		samsung,pins = "gph-6", "gph-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
 	};
 
-	extuart_clk: extuart-clk {
+	extuart_clk: extuart-clk-pins {
 		samsung,pins = "gph-12";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
 	};
 
-	i2c0_bus: i2c0-bus {
+	i2c0_bus: i2c0-bus-pins {
 		samsung,pins = "gpe-14", "gpe-15";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
 	};
 
-	spi0_bus: spi0-bus {
+	spi0_bus: spi0-bus-pins {
 		samsung,pins = "gpe-11", "gpe-12", "gpe-13";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
 	};
 
-	sd0_clk: sd0-clk {
+	sd0_clk: sd0-clk-pins {
 		samsung,pins = "gpe-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
 	};
 
-	sd0_cmd: sd0-cmd {
+	sd0_cmd: sd0-cmd-pins {
 		samsung,pins = "gpe-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
 	};
 
-	sd0_bus1: sd0-bus1 {
+	sd0_bus1: sd0-bus1-pins {
 		samsung,pins = "gpe-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
 	};
 
-	sd0_bus4: sd0-bus4 {
+	sd0_bus4: sd0-bus4-pins {
 		samsung,pins = "gpe-8", "gpe-9", "gpe-10";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
 	};
 
-	sd1_cmd: sd1-cmd {
+	sd1_cmd: sd1-cmd-pins {
 		samsung,pins = "gpl-8";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
 	};
 
-	sd1_clk: sd1-clk {
+	sd1_clk: sd1-clk-pins {
 		samsung,pins = "gpl-9";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
 	};
 
-	sd1_bus1: sd1-bus1 {
+	sd1_bus1: sd1-bus1-pins {
 		samsung,pins = "gpl-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
 	};
 
-	sd1_bus4: sd1-bus4 {
+	sd1_bus4: sd1-bus4-pins {
 		samsung,pins = "gpl-1", "gpl-2", "gpl-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
 	};
 };
diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi
index 4f084f4fe44f..4660751cb207 100644
--- a/arch/arm/boot/dts/s3c2416.dtsi
+++ b/arch/arm/boot/dts/s3c2416.dtsi
@@ -45,7 +45,7 @@
 		status = "disabled";
 	};
 
-	sdhci_1: sdhci@4ac00000 {
+	sdhci_1: mmc@4ac00000 {
 		compatible = "samsung,s3c6410-sdhci";
 		reg = <0x4AC00000 0x100>;
 		interrupts = <0 0 21 3>;
@@ -56,7 +56,7 @@
 		status = "disabled";
 	};
 
-	sdhci_0: sdhci@4a800000 {
+	sdhci_0: mmc@4a800000 {
 		compatible = "samsung,s3c6410-sdhci";
 		reg = <0x4A800000 0x100>;
 		interrupts = <0 0 20 3>;
diff --git a/arch/arm/boot/dts/s3c6410-mini6410.dts b/arch/arm/boot/dts/s3c6410-mini6410.dts
index 285555b9ed94..17097da36f5e 100644
--- a/arch/arm/boot/dts/s3c6410-mini6410.dts
+++ b/arch/arm/boot/dts/s3c6410-mini6410.dts
@@ -193,12 +193,12 @@
 };
 
 &pinctrl0 {
-	gpio_leds: gpio-leds {
+	gpio_leds: gpio-leds-pins {
 		samsung,pins = "gpk-4", "gpk-5", "gpk-6", "gpk-7";
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	gpio_keys: gpio-keys {
+	gpio_keys: gpio-keys-pins {
 		samsung,pins = "gpn-0", "gpn-1", "gpn-2", "gpn-3",
 				"gpn-4", "gpn-5", "gpl-11", "gpl-12";
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
index 8e9594d64b57..f53959b7d031 100644
--- a/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
+++ b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
@@ -9,118 +9,118 @@
  * listed as device tree nodes in this file.
  */
 
-#include <dt-bindings/pinctrl/samsung.h>
+#include "s3c64xx-pinctrl.h"
 
 &pinctrl0 {
 	/*
 	 * Pin banks
 	 */
 
-	gpa: gpa {
+	gpa: gpa-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpb: gpb {
+	gpb: gpb-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpc: gpc {
+	gpc: gpc-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpd: gpd {
+	gpd: gpd-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpe: gpe {
+	gpe: gpe-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpf: gpf {
+	gpf: gpf-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpg: gpg {
+	gpg: gpg-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gph: gph {
+	gph: gph-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpi: gpi {
+	gpi: gpi-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpj: gpj {
+	gpj: gpj-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpk: gpk {
+	gpk: gpk-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpl: gpl {
+	gpl: gpl-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpm: gpm {
+	gpm: gpm-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpn: gpn {
+	gpn: gpn-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpo: gpo {
+	gpo: gpo-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpp: gpp {
+	gpp: gpp-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpq: gpq {
+	gpq: gpq-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
@@ -131,552 +131,552 @@
 	 * Pin groups
 	 */
 
-	uart0_data: uart0-data {
+	uart0_data: uart0-data-pins {
 		samsung,pins = "gpa-0", "gpa-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	uart0_fctl: uart0-fctl {
+	uart0_fctl: uart0-fctl-pins {
 		samsung,pins = "gpa-2", "gpa-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	uart1_data: uart1-data {
+	uart1_data: uart1-data-pins {
 		samsung,pins = "gpa-4", "gpa-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	uart1_fctl: uart1-fctl {
+	uart1_fctl: uart1-fctl-pins {
 		samsung,pins = "gpa-6", "gpa-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	uart2_data: uart2-data {
+	uart2_data: uart2-data-pins {
 		samsung,pins = "gpb-0", "gpb-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	uart3_data: uart3-data {
+	uart3_data: uart3-data-pins {
 		samsung,pins = "gpb-2", "gpb-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	ext_dma_0: ext-dma-0 {
+	ext_dma_0: ext-dma-0-pins {
 		samsung,pins = "gpb-0", "gpb-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	ext_dma_1: ext-dma-1 {
+	ext_dma_1: ext-dma-1-pins {
 		samsung,pins = "gpb-2", "gpb-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	irda_data_0: irda-data-0 {
+	irda_data_0: irda-data-0-pins {
 		samsung,pins = "gpb-0", "gpb-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	irda_data_1: irda-data-1 {
+	irda_data_1: irda-data-1-pins {
 		samsung,pins = "gpb-2", "gpb-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	irda_sdbw: irda-sdbw {
+	irda_sdbw: irda-sdbw-pins {
 		samsung,pins = "gpb-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	i2c0_bus: i2c0-bus {
+	i2c0_bus: i2c0-bus-pins {
 		samsung,pins = "gpb-5", "gpb-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 	};
 
-	i2c1_bus: i2c1-bus {
+	i2c1_bus: i2c1-bus-pins {
 		/* S3C6410-only */
 		samsung,pins = "gpb-2", "gpb-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_6>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_6>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 	};
 
-	spi0_bus: spi0-bus {
+	spi0_bus: spi0-bus-pins {
 		samsung,pins = "gpc-0", "gpc-1", "gpc-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 	};
 
-	spi0_cs: spi0-cs {
+	spi0_cs: spi0-cs-pins {
 		samsung,pins = "gpc-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	spi1_bus: spi1-bus {
+	spi1_bus: spi1-bus-pins {
 		samsung,pins = "gpc-4", "gpc-5", "gpc-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 	};
 
-	spi1_cs: spi1-cs {
+	spi1_cs: spi1-cs-pins {
 		samsung,pins = "gpc-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd0_cmd: sd0-cmd {
+	sd0_cmd: sd0-cmd-pins {
 		samsung,pins = "gpg-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd0_clk: sd0-clk {
+	sd0_clk: sd0-clk-pins {
 		samsung,pins = "gpg-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd0_bus1: sd0-bus1 {
+	sd0_bus1: sd0-bus1-pins {
 		samsung,pins = "gpg-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd0_bus4: sd0-bus4 {
+	sd0_bus4: sd0-bus4-pins {
 		samsung,pins = "gpg-2", "gpg-3", "gpg-4", "gpg-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd0_cd: sd0-cd {
+	sd0_cd: sd0-cd-pins {
 		samsung,pins = "gpg-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 	};
 
-	sd1_cmd: sd1-cmd {
+	sd1_cmd: sd1-cmd-pins {
 		samsung,pins = "gph-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd1_clk: sd1-clk {
+	sd1_clk: sd1-clk-pins {
 		samsung,pins = "gph-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd1_bus1: sd1-bus1 {
+	sd1_bus1: sd1-bus1-pins {
 		samsung,pins = "gph-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd1_bus4: sd1-bus4 {
+	sd1_bus4: sd1-bus4-pins {
 		samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd1_bus8: sd1-bus8 {
+	sd1_bus8: sd1-bus8-pins {
 		samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5",
 				"gph-6", "gph-7", "gph-8", "gph-9";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd1_cd: sd1-cd {
+	sd1_cd: sd1-cd-pins {
 		samsung,pins = "gpg-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 	};
 
-	sd2_cmd: sd2-cmd {
+	sd2_cmd: sd2-cmd-pins {
 		samsung,pins = "gpc-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd2_clk: sd2-clk {
+	sd2_clk: sd2-clk-pins {
 		samsung,pins = "gpc-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd2_bus1: sd2-bus1 {
+	sd2_bus1: sd2-bus1-pins {
 		samsung,pins = "gph-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd2_bus4: sd2-bus4 {
+	sd2_bus4: sd2-bus4-pins {
 		samsung,pins = "gph-6", "gph-7", "gph-8", "gph-9";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	i2s0_bus: i2s0-bus {
+	i2s0_bus: i2s0-bus-pins {
 		samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	i2s0_cdclk: i2s0-cdclk {
+	i2s0_cdclk: i2s0-cdclk-pins {
 		samsung,pins = "gpd-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	i2s1_bus: i2s1-bus {
+	i2s1_bus: i2s1-bus-pins {
 		samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	i2s1_cdclk: i2s1-cdclk {
+	i2s1_cdclk: i2s1-cdclk-pins {
 		samsung,pins = "gpe-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	i2s2_bus: i2s2-bus {
+	i2s2_bus: i2s2-bus-pins {
 		/* S3C6410-only */
 		samsung,pins = "gpc-4", "gpc-5", "gpc-6", "gph-6",
 				"gph-8", "gph-9";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_5>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	i2s2_cdclk: i2s2-cdclk {
+	i2s2_cdclk: i2s2-cdclk-pins {
 		/* S3C6410-only */
 		samsung,pins = "gph-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_5>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	pcm0_bus: pcm0-bus {
+	pcm0_bus: pcm0-bus-pins {
 		samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	pcm0_extclk: pcm0-extclk {
+	pcm0_extclk: pcm0-extclk-pins {
 		samsung,pins = "gpd-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	pcm1_bus: pcm1-bus {
+	pcm1_bus: pcm1-bus-pins {
 		samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	pcm1_extclk: pcm1-extclk {
+	pcm1_extclk: pcm1-extclk-pins {
 		samsung,pins = "gpe-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	ac97_bus_0: ac97-bus-0 {
+	ac97_bus_0: ac97-bus-0-pins {
 		samsung,pins = "gpd-0", "gpd-1", "gpd-2", "gpd-3", "gpd-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	ac97_bus_1: ac97-bus-1 {
+	ac97_bus_1: ac97-bus-1-pins {
 		samsung,pins = "gpe-0", "gpe-1", "gpe-2", "gpe-3", "gpe-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	cam_port: cam-port {
+	cam_port: cam-port-pins {
 		samsung,pins = "gpf-0", "gpf-1", "gpf-2", "gpf-4",
 				"gpf-5", "gpf-6", "gpf-7", "gpf-8",
 				"gpf-9", "gpf-10", "gpf-11", "gpf-12";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	cam_rst: cam-rst {
+	cam_rst: cam-rst-pins {
 		samsung,pins = "gpf-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	cam_field: cam-field {
+	cam_field: cam-field-pins {
 		/* S3C6410-only */
 		samsung,pins = "gpb-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	pwm_extclk: pwm-extclk {
+	pwm_extclk: pwm-extclk-pins {
 		samsung,pins = "gpf-13";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	pwm0_out: pwm0-out {
+	pwm0_out: pwm0-out-pins {
 		samsung,pins = "gpf-14";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	pwm1_out: pwm1-out {
+	pwm1_out: pwm1-out-pins {
 		samsung,pins = "gpf-15";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	clkout0: clkout-0 {
+	clkout0: clkout-0-pins {
 		samsung,pins = "gpf-14";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col0_0: keypad-col0-0 {
+	keypad_col0_0: keypad-col0-0-pins {
 		samsung,pins = "gph-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col1_0: keypad-col1-0 {
+	keypad_col1_0: keypad-col1-0-pins {
 		samsung,pins = "gph-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col2_0: keypad-col2-0 {
+	keypad_col2_0: keypad-col2-0-pins {
 		samsung,pins = "gph-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col3_0: keypad-col3-0 {
+	keypad_col3_0: keypad-col3-0-pins {
 		samsung,pins = "gph-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col4_0: keypad-col4-0 {
+	keypad_col4_0: keypad-col4-0-pins {
 		samsung,pins = "gph-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col5_0: keypad-col5-0 {
+	keypad_col5_0: keypad-col5-0-pins {
 		samsung,pins = "gph-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col6_0: keypad-col6-0 {
+	keypad_col6_0: keypad-col6-0-pins {
 		samsung,pins = "gph-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col7_0: keypad-col7-0 {
+	keypad_col7_0: keypad-col7-0-pins {
 		samsung,pins = "gph-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col0_1: keypad-col0-1 {
+	keypad_col0_1: keypad-col0-1-pins {
 		samsung,pins = "gpl-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col1_1: keypad-col1-1 {
+	keypad_col1_1: keypad-col1-1-pins {
 		samsung,pins = "gpl-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col2_1: keypad-col2-1 {
+	keypad_col2_1: keypad-col2-1-pins {
 		samsung,pins = "gpl-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col3_1: keypad-col3-1 {
+	keypad_col3_1: keypad-col3-1-pins {
 		samsung,pins = "gpl-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col4_1: keypad-col4-1 {
+	keypad_col4_1: keypad-col4-1-pins {
 		samsung,pins = "gpl-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col5_1: keypad-col5-1 {
+	keypad_col5_1: keypad-col5-1-pins {
 		samsung,pins = "gpl-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col6_1: keypad-col6-1 {
+	keypad_col6_1: keypad-col6-1-pins {
 		samsung,pins = "gpl-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col7_1: keypad-col7-1 {
+	keypad_col7_1: keypad-col7-1-pins {
 		samsung,pins = "gpl-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row0_0: keypad-row0-0 {
+	keypad_row0_0: keypad-row0-0-pins {
 		samsung,pins = "gpk-8";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row1_0: keypad-row1-0 {
+	keypad_row1_0: keypad-row1-0-pins {
 		samsung,pins = "gpk-9";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row2_0: keypad-row2-0 {
+	keypad_row2_0: keypad-row2-0-pins {
 		samsung,pins = "gpk-10";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row3_0: keypad-row3-0 {
+	keypad_row3_0: keypad-row3-0-pins {
 		samsung,pins = "gpk-11";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row4_0: keypad-row4-0 {
+	keypad_row4_0: keypad-row4-0-pins {
 		samsung,pins = "gpk-12";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row5_0: keypad-row5-0 {
+	keypad_row5_0: keypad-row5-0-pins {
 		samsung,pins = "gpk-13";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row6_0: keypad-row6-0 {
+	keypad_row6_0: keypad-row6-0-pins {
 		samsung,pins = "gpk-14";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row7_0: keypad-row7-0 {
+	keypad_row7_0: keypad-row7-0-pins {
 		samsung,pins = "gpk-15";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row0_1: keypad-row0-1 {
+	keypad_row0_1: keypad-row0-1-pins {
 		samsung,pins = "gpn-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row1_1: keypad-row1-1 {
+	keypad_row1_1: keypad-row1-1-pins {
 		samsung,pins = "gpn-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row2_1: keypad-row2-1 {
+	keypad_row2_1: keypad-row2-1-pins {
 		samsung,pins = "gpn-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row3_1: keypad-row3-1 {
+	keypad_row3_1: keypad-row3-1-pins {
 		samsung,pins = "gpn-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row4_1: keypad-row4-1 {
+	keypad_row4_1: keypad-row4-1-pins {
 		samsung,pins = "gpn-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row5_1: keypad-row5-1 {
+	keypad_row5_1: keypad-row5-1-pins {
 		samsung,pins = "gpn-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row6_1: keypad-row6-1 {
+	keypad_row6_1: keypad-row6-1-pins {
 		samsung,pins = "gpn-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row7_1: keypad-row7-1 {
+	keypad_row7_1: keypad-row7-1-pins {
 		samsung,pins = "gpn-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	lcd_ctrl: lcd-ctrl {
+	lcd_ctrl: lcd-ctrl-pins {
 		samsung,pins = "gpj-8", "gpj-9", "gpj-10", "gpj-11";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	lcd_data16: lcd-data-width16 {
+	lcd_data16: lcd-data-width16-pins {
 		samsung,pins = "gpi-3", "gpi-4", "gpi-5", "gpi-6",
 				"gpi-7", "gpi-10", "gpi-11", "gpi-12",
 				"gpi-13", "gpi-14", "gpi-15", "gpj-3",
 				"gpj-4", "gpj-5", "gpj-6", "gpj-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	lcd_data18: lcd-data-width18 {
+	lcd_data18: lcd-data-width18-pins {
 		samsung,pins = "gpi-2", "gpi-3", "gpi-4", "gpi-5",
 				"gpi-6", "gpi-7", "gpi-10", "gpi-11",
 				"gpi-12", "gpi-13", "gpi-14", "gpi-15",
 				"gpj-2", "gpj-3", "gpj-4", "gpj-5",
 				"gpj-6", "gpj-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	lcd_data24: lcd-data-width24 {
+	lcd_data24: lcd-data-width24-pins {
 		samsung,pins = "gpi-0", "gpi-1", "gpi-2", "gpi-3",
 				"gpi-4", "gpi-5", "gpi-6", "gpi-7",
 				"gpi-8", "gpi-9", "gpi-10", "gpi-11",
 				"gpi-12", "gpi-13", "gpi-14", "gpi-15",
 				"gpj-0", "gpj-1", "gpj-2", "gpj-3",
 				"gpj-4", "gpj-5", "gpj-6", "gpj-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	hsi_bus: hsi-bus {
+	hsi_bus: hsi-bus-pins {
 		samsung,pins = "gpk-0", "gpk-1", "gpk-2", "gpk-3",
 				"gpk-4", "gpk-5", "gpk-6", "gpk-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 };
diff --git a/arch/arm/boot/dts/s3c64xx-pinctrl.h b/arch/arm/boot/dts/s3c64xx-pinctrl.h
new file mode 100644
index 000000000000..645c591db357
--- /dev/null
+++ b/arch/arm/boot/dts/s3c64xx-pinctrl.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Samsung S3C64xx DTS pinctrl constants
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2022 Linaro Ltd
+ * Author: Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#ifndef __DTS_ARM_SAMSUNG_S3C64XX_PINCTRL_H__
+#define __DTS_ARM_SAMSUNG_S3C64XX_PINCTRL_H__
+
+#define S3C64XX_PIN_PULL_NONE		0
+#define S3C64XX_PIN_PULL_DOWN		1
+#define S3C64XX_PIN_PULL_UP		2
+
+#define S3C64XX_PIN_FUNC_INPUT		0
+#define S3C64XX_PIN_FUNC_OUTPUT		1
+#define S3C64XX_PIN_FUNC_2		2
+#define S3C64XX_PIN_FUNC_3		3
+#define S3C64XX_PIN_FUNC_4		4
+#define S3C64XX_PIN_FUNC_5		5
+#define S3C64XX_PIN_FUNC_6		6
+#define S3C64XX_PIN_FUNC_EINT		7
+
+#endif /* __DTS_ARM_SAMSUNG_S3C64XX_PINCTRL_H__ */
diff --git a/arch/arm/boot/dts/s3c64xx.dtsi b/arch/arm/boot/dts/s3c64xx.dtsi
index cb11a87dbc42..c03df6355500 100644
--- a/arch/arm/boot/dts/s3c64xx.dtsi
+++ b/arch/arm/boot/dts/s3c64xx.dtsi
@@ -59,7 +59,7 @@
 			#interrupt-cells = <1>;
 		};
 
-		sdhci0: sdhci@7c200000 {
+		sdhci0: mmc@7c200000 {
 			compatible = "samsung,s3c6410-sdhci";
 			reg = <0x7c200000 0x100>;
 			interrupt-parent = <&vic1>;
@@ -70,7 +70,7 @@
 			status = "disabled";
 		};
 
-		sdhci1: sdhci@7c300000 {
+		sdhci1: mmc@7c300000 {
 			compatible = "samsung,s3c6410-sdhci";
 			reg = <0x7c300000 0x100>;
 			interrupt-parent = <&vic1>;
@@ -81,7 +81,7 @@
 			status = "disabled";
 		};
 
-		sdhci2: sdhci@7c400000 {
+		sdhci2: mmc@7c400000 {
 			compatible = "samsung,s3c6410-sdhci";
 			reg = <0x7c400000 0x100>;
 			interrupt-parent = <&vic1>;
@@ -178,20 +178,12 @@
 			interrupt-parent = <&vic1>;
 			interrupts = <21>;
 
-			pctrl_int_map: pinctrl-interrupt-map {
-				interrupt-map = <0 &vic0 0>,
-						<1 &vic0 1>,
-						<2 &vic1 0>,
-						<3 &vic1 1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				#interrupt-cells = <1>;
-			};
-
 			wakeup-interrupt-controller {
 				compatible = "samsung,s3c64xx-wakeup-eint";
-				interrupts = <0>, <1>, <2>, <3>;
-				interrupt-parent = <&pctrl_int_map>;
+				interrupts-extended = <&vic0 0>,
+						      <&vic0 1>,
+						      <&vic1 0>,
+						      <&vic1 1>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/s5pv210-aquila.dts b/arch/arm/boot/dts/s5pv210-aquila.dts
index 6423348034b6..0f5c6cd0f3a1 100644
--- a/arch/arm/boot/dts/s5pv210-aquila.dts
+++ b/arch/arm/boot/dts/s5pv210-aquila.dts
@@ -29,8 +29,7 @@
 
 	memory@30000000 {
 		device_type = "memory";
-		reg = <0x30000000 0x05000000
-			0x40000000 0x18000000>;
+		reg = <0x30000000 0x05000000>, <0x40000000 0x18000000>;
 	};
 
 	pmic_ap_clk: clock-0 {
@@ -391,9 +390,9 @@
 };
 
 &pinctrl0 {
-	t_flash_detect: t-flash-detect {
+	t_flash_detect: t-flash-detect-pins {
 		samsung,pins = "gph3-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
 	};
 };
diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi
index 160f8cd9a68d..964c5fe51755 100644
--- a/arch/arm/boot/dts/s5pv210-aries.dtsi
+++ b/arch/arm/boot/dts/s5pv210-aries.dtsi
@@ -24,9 +24,9 @@
 
 	memory@30000000 {
 		device_type = "memory";
-		reg = <0x30000000 0x05000000
-			0x40000000 0x10000000
-			0x50000000 0x08000000>;
+		reg = <0x30000000 0x05000000>,
+			<0x40000000 0x10000000>,
+			<0x50000000 0x08000000>;
 	};
 
 	reserved-memory {
@@ -564,7 +564,6 @@
 			reset-gpios = <&mp05 5 GPIO_ACTIVE_LOW>;
 			vdd3-supply = <&ldo7_reg>;
 			vci-supply = <&ldo17_reg>;
-			spi-cs-high;
 			spi-max-frequency = <1200000>;
 
 			pinctrl-names = "default";
@@ -636,7 +635,7 @@
 };
 
 &i2s0 {
-	dmas = <&pdma0 9>, <&pdma0 10>, <&pdma0 11>;
+	dmas = <&pdma0 10>, <&pdma0 9>, <&pdma0 11>;
 	status = "okay";
 };
 
@@ -645,185 +644,185 @@
 };
 
 &pinctrl0 {
-	bt_reset: bt-reset {
+	bt_reset: bt-reset-pins {
 		samsung,pins = "gpb-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	wlan_bt_en: wlan-bt-en {
+	wlan_bt_en: wlan-bt-en-pins {
 		samsung,pins = "gpb-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
 		samsung,pin-val = <1>;
 	};
 
-	codec_ldo: codec-ldo {
+	codec_ldo: codec-ldo-pins {
 		samsung,pins = "gpf3-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
 	};
 
 	prox_i2c_pins: gp2a-i2c-pins {
 		samsung,pins = "gpg0-2", "gpg2-2";
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	wlan_gpio_rst: wlan-gpio-rst {
+	wlan_gpio_rst: wlan-gpio-rst-pins {
 		samsung,pins = "gpg1-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
 	};
 
-	bt_wake: bt-wake {
+	bt_wake: bt-wake-pins {
 		samsung,pins = "gpg3-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
 	};
 
-	gp2a_irq: gp2a-irq {
+	gp2a_irq: gp2a-irq-pins {
 		samsung,pins = "gph0-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_F>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_DOWN>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
 	pmic_dvs_pins: pmic-dvs-pins {
 		samsung,pins = "gph0-3", "gph0-4", "gph0-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 		samsung,pin-val = <0>;
 	};
 
-	pmic_irq: pmic-irq {
+	pmic_irq: pmic-irq-pins {
 		samsung,pins = "gph0-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_F>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	wifi_host_wake: wifi-host-wake {
+	wifi_host_wake: wifi-host-wake-pins {
 		samsung,pins = "gph2-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_DOWN>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	bt_host_wake: bt-host-wake {
+	bt_host_wake: bt-host-wake-pins {
 		samsung,pins = "gph2-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_DOWN>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	musb_irq: musq-irq {
+	musb_irq: musq-irq-pins {
 		samsung,pins = "gph2-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	tf_detect: tf-detect {
+	tf_detect: tf-detect-pins {
 		samsung,pins = "gph3-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_DOWN>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	wifi_wake: wifi-wake {
+	wifi_wake: wifi-wake-pins {
 		samsung,pins = "gph3-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
 	};
 
 	magnetometer_i2c_pins: yas529-i2c-pins {
 		samsung,pins = "gpj0-0", "gpj0-1";
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	ts_irq: ts-irq {
+	ts_irq: ts-irq-pins {
 		samsung,pins = "gpj0-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	vibrator_ena: vibrator-ena {
+	vibrator_ena: vibrator-ena-pins {
 		samsung,pins = "gpj1-1";
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	gp2a_power: gp2a-power {
+	gp2a_power: gp2a-power-pins {
 		samsung,pins = "gpj1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
 	touchkey_i2c_pins: touchkey-i2c-pins {
 		samsung,pins = "gpj3-0", "gpj3-1";
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	touchkey_vdd_ena: touchkey-vdd-ena {
+	touchkey_vdd_ena: touchkey-vdd-ena-pins {
 		samsung,pins = "gpj3-2";
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
 	musb_i2c_pins: musb-i2c-pins {
 		samsung,pins = "gpj3-4", "gpj3-5";
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
 	accel_i2c_pins: accel-i2c-pins {
 		samsung,pins = "gpj3-6", "gpj3-7";
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
 	pmic_i2c_pins: pmic-i2c-pins {
 		samsung,pins = "gpj4-0", "gpj4-3";
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	touchkey_irq: touchkey-irq {
+	touchkey_irq: touchkey-irq-pins {
 		samsung,pins = "gpj4-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
 	lcd_spi_pins: spi-lcd-pins {
 		samsung,pins = "mp01-1", "mp04-1", "mp04-3";
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
 	fg_i2c_pins: fg-i2c-pins {
 		samsung,pins = "mp05-0", "mp05-1";
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
 	sound_i2c_pins: sound-i2c-pins {
 		samsung,pins = "mp05-2", "mp05-3";
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	panel_rst: panel-rst {
+	panel_rst: panel-rst-pins {
 		samsung,pins = "mp05-5";
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 };
 
@@ -895,7 +894,7 @@
 		device-wakeup-gpios = <&gpg3 4 GPIO_ACTIVE_HIGH>;
 		interrupt-parent = <&gph2>;
 		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "host-wake";
+		interrupt-names = "host-wakeup";
 	};
 };
 
diff --git a/arch/arm/boot/dts/s5pv210-fascinate4g.dts b/arch/arm/boot/dts/s5pv210-fascinate4g.dts
index 7427c84f1126..eaa7c4f0e257 100644
--- a/arch/arm/boot/dts/s5pv210-fascinate4g.dts
+++ b/arch/arm/boot/dts/s5pv210-fascinate4g.dts
@@ -17,20 +17,20 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "power";
 			gpios = <&gph2 6 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			wakeup-source;
 		};
 
-		vol-down {
+		key-vol-down {
 			label = "volume_down";
 			gpios = <&gph3 2 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
 		};
 
-		vol-up {
+		key-vol-up {
 			label = "volume_up";
 			gpios = <&gph3 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
@@ -126,39 +126,39 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sleep_cfg>;
 
-	headset_det: headset-det {
+	headset_det: headset-det-pins {
 		samsung,pins = "gph0-6", "gph3-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_F>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
 	};
 
-	fg_irq: fg-irq {
+	fg_irq: fg-irq-pins {
 		samsung,pins = "gph3-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_F>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	headset_micbias_ena: headset-micbias-ena {
+	headset_micbias_ena: headset-micbias-ena-pins {
 		samsung,pins = "gpj2-5";
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	earpath_sel: earpath-sel {
+	earpath_sel: earpath-sel-pins {
 		samsung,pins = "gpj2-6";
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	main_micbias_ena: main-micbias-ena {
+	main_micbias_ena: main-micbias-ena-pins {
 		samsung,pins = "gpj4-2";
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
 	/* Based on vendor kernel v2.6.35.7 */
-	sleep_cfg: sleep-cfg {
+	sleep_cfg: sleep-state {
 		PIN_SLP(gpa0-0, PREV, NONE);
 		PIN_SLP(gpa0-1, PREV, NONE);
 		PIN_SLP(gpa0-2, PREV, NONE);
diff --git a/arch/arm/boot/dts/s5pv210-galaxys.dts b/arch/arm/boot/dts/s5pv210-galaxys.dts
index eeec2bdece11..532d3f5bceb1 100644
--- a/arch/arm/boot/dts/s5pv210-galaxys.dts
+++ b/arch/arm/boot/dts/s5pv210-galaxys.dts
@@ -24,26 +24,26 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "power";
 			gpios = <&gph2 6 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			wakeup-source;
 		};
 
-		vol-down {
+		key-vol-down {
 			label = "volume_down";
 			gpios = <&gph3 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
 		};
 
-		vol-up {
+		key-vol-up {
 			label = "volume_up";
 			gpios = <&gph3 2 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
 		};
 
-		home {
+		key-home {
 			label = "home";
 			gpios = <&gph3 5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
@@ -152,51 +152,51 @@
 
 	fm_i2c_pins: fm-i2c-pins {
 		samsung,pins = "gpd1-2", "gpd1-3";
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	headset_det: headset-det {
+	headset_det: headset-det-pins {
 		samsung,pins = "gph0-6", "gph3-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_F>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
 	};
 
-	fm_irq: fm-irq {
+	fm_irq: fm-irq-pins {
 		samsung,pins = "gpj2-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	fm_rst: fm-rst {
+	fm_rst: fm-rst-pins {
 		samsung,pins = "gpj2-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	earpath_sel: earpath-sel {
+	earpath_sel: earpath-sel-pins {
 		samsung,pins = "gpj2-6";
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	massmemory_en: massmemory-en {
+	massmemory_en: massmemory-en-pins {
 		samsung,pins = "gpj2-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	micbias_reg_ena: micbias-reg-ena {
+	micbias_reg_ena: micbias-reg-ena-pins {
 		samsung,pins = "gpj4-2";
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
 	/* Based on CyanogenMod 3.0.101 kernel */
-	sleep_cfg: sleep-cfg {
+	sleep_cfg: sleep-state {
 		PIN_SLP(gpa0-0, PREV, NONE);
 		PIN_SLP(gpa0-1, PREV, NONE);
 		PIN_SLP(gpa0-2, PREV, NONE);
diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/s5pv210-goni.dts
index c6f39147cb96..d32f42dd1bf5 100644
--- a/arch/arm/boot/dts/s5pv210-goni.dts
+++ b/arch/arm/boot/dts/s5pv210-goni.dts
@@ -30,9 +30,9 @@
 
 	memory@30000000 {
 		device_type = "memory";
-		reg = <0x30000000 0x05000000
-			0x40000000 0x10000000
-			0x50000000 0x08000000>;
+		reg = <0x30000000 0x05000000>,
+			<0x40000000 0x10000000>,
+			<0x50000000 0x08000000>;
 	};
 
 	pmic_ap_clk: clock-0 {
diff --git a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
index b8c5172c31dd..6d6daef9fb7a 100644
--- a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
+++ b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
@@ -16,17 +16,17 @@
  * nodes can be added to this file.
  */
 
-#include <dt-bindings/pinctrl/samsung.h>
+#include "s5pv210-pinctrl.h"
 
 #define PIN_SLP(_pin, _mode, _pull)					\
 	_pin {								\
 		samsung,pins = #_pin;					\
-		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_ ##_mode>;	\
-		samsung,pin-pud-pdn = <S3C64XX_PIN_PULL_ ##_pull>;	\
+		samsung,pin-con-pdn = <S5PV210_PIN_PDN_ ##_mode>;	\
+		samsung,pin-pud-pdn = <S5PV210_PIN_PULL_ ##_pull>;	\
 	}
 
 &pinctrl0 {
-	gpa0: gpa0 {
+	gpa0: gpa0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -34,7 +34,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpa1: gpa1 {
+	gpa1: gpa1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -42,7 +42,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb: gpb {
+	gpb: gpb-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -50,7 +50,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc0: gpc0 {
+	gpc0: gpc0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -58,7 +58,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc1: gpc1 {
+	gpc1: gpc1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -66,7 +66,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd0: gpd0 {
+	gpd0: gpd0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -74,7 +74,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd1: gpd1 {
+	gpd1: gpd1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -82,7 +82,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpe0: gpe0 {
+	gpe0: gpe0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -90,7 +90,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpe1: gpe1 {
+	gpe1: gpe1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -98,7 +98,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf0: gpf0 {
+	gpf0: gpf0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -106,7 +106,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf1: gpf1 {
+	gpf1: gpf1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -114,7 +114,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf2: gpf2 {
+	gpf2: gpf2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -122,7 +122,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf3: gpf3 {
+	gpf3: gpf3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -130,7 +130,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg0: gpg0 {
+	gpg0: gpg0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -138,7 +138,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg1: gpg1 {
+	gpg1: gpg1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -146,7 +146,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg2: gpg2 {
+	gpg2: gpg2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -154,7 +154,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg3: gpg3 {
+	gpg3: gpg3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -162,7 +162,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpj0: gpj0 {
+	gpj0: gpj0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -170,7 +170,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpj1: gpj1 {
+	gpj1: gpj1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -178,7 +178,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpj2: gpj2 {
+	gpj2: gpj2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -186,7 +186,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpj3: gpj3 {
+	gpj3: gpj3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -194,7 +194,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpj4: gpj4 {
+	gpj4: gpj4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -202,47 +202,47 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpi: gpi {
+	gpi: gpi-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	mp01: mp01 {
+	mp01: mp01-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	mp02: mp02 {
+	mp02: mp02-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	mp03: mp03 {
+	mp03: mp03-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	mp04: mp04 {
+	mp04: mp04-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	mp05: mp05 {
+	mp05: mp05-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	mp06: mp06 {
+	mp06: mp06-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	mp07: mp07 {
+	mp07: mp07-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gph0: gph0 {
+	gph0: gph0-gpio-bank {
 		gpio-controller;
 		interrupt-controller;
 		interrupt-parent = <&vic0>;
@@ -252,7 +252,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gph1: gph1 {
+	gph1: gph1-gpio-bank {
 		gpio-controller;
 		interrupt-controller;
 		interrupt-parent = <&vic0>;
@@ -262,7 +262,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gph2: gph2 {
+	gph2: gph2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -270,7 +270,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gph3: gph3 {
+	gph3: gph3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -278,572 +278,572 @@
 		#interrupt-cells = <2>;
 	};
 
-	uart0_data: uart0-data {
+	uart0_data: uart0-data-pins {
 		samsung,pins = "gpa0-0", "gpa0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	uart0_fctl: uart0-fctl {
+	uart0_fctl: uart0-fctl-pins {
 		samsung,pins = "gpa0-2", "gpa0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	uart1_data: uart1-data {
+	uart1_data: uart1-data-pins {
 		samsung,pins = "gpa0-4", "gpa0-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	uart1_fctl: uart1-fctl {
+	uart1_fctl: uart1-fctl-pins {
 		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	uart2_data: uart2-data {
+	uart2_data: uart2-data-pins {
 		samsung,pins = "gpa1-0", "gpa1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	uart2_fctl: uart2-fctl {
+	uart2_fctl: uart2-fctl-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	uart3_data: uart3-data {
+	uart3_data: uart3-data-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	uart_audio: uart-audio {
+	uart_audio: uart-audio-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_4>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	spi0_bus: spi0-bus {
+	spi0_bus: spi0-bus-pins {
 		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	spi1_bus: spi1-bus {
+	spi1_bus: spi1-bus-pins {
 		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	i2s0_bus: i2s0-bus {
+	i2s0_bus: i2s0-bus-pins {
 		samsung,pins = "gpi-0", "gpi-1", "gpi-2", "gpi-3",
 				"gpi-4", "gpi-5", "gpi-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	i2s1_bus: i2s1-bus {
+	i2s1_bus: i2s1-bus-pins {
 		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 				"gpc0-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	i2s2_bus: i2s2-bus {
+	i2s2_bus: i2s2-bus-pins {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_4>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	pcm1_bus: pcm1-bus {
+	pcm1_bus: pcm1-bus-pins {
 		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 				"gpc0-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	ac97_bus: ac97-bus {
+	ac97_bus: ac97-bus-pins {
 		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 				"gpc0-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_4>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	i2s2_bus: i2s2-bus {
+	i2s2_bus: i2s2-bus-pins {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	pcm2_bus: pcm2-bus {
+	pcm2_bus: pcm2-bus-pins {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	spdif_bus: spdif-bus {
+	spdif_bus: spdif-bus-pins {
 		samsung,pins = "gpc1-0", "gpc1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_4>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	spi2_bus: spi2-bus {
+	spi2_bus: spi2-bus-pins {
 		samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_5>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	i2c0_bus: i2c0-bus {
+	i2c0_bus: i2c0-bus-pins {
 		samsung,pins = "gpd1-0", "gpd1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	i2c1_bus: i2c1-bus {
+	i2c1_bus: i2c1-bus-pins {
 		samsung,pins = "gpd1-2", "gpd1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	i2c2_bus: i2c2-bus {
+	i2c2_bus: i2c2-bus-pins {
 		samsung,pins = "gpd1-4", "gpd1-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	pwm0_out: pwm0-out {
+	pwm0_out: pwm0-out-pins {
 		samsung,pins = "gpd0-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	pwm1_out: pwm1-out {
+	pwm1_out: pwm1-out-pins {
 		samsung,pins = "gpd0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	pwm2_out: pwm2-out {
+	pwm2_out: pwm2-out-pins {
 		samsung,pins = "gpd0-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	pwm3_out: pwm3-out {
+	pwm3_out: pwm3-out-pins {
 		samsung,pins = "gpd0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	keypad_row0: keypad-row-0 {
+	keypad_row0: keypad-row-0-pins {
 		samsung,pins = "gph3-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	keypad_row1: keypad-row-1 {
+	keypad_row1: keypad-row-1-pins {
 		samsung,pins = "gph3-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	keypad_row2: keypad-row-2 {
+	keypad_row2: keypad-row-2-pins {
 		samsung,pins = "gph3-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	keypad_row3: keypad-row-3 {
+	keypad_row3: keypad-row-3-pins {
 		samsung,pins = "gph3-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	keypad_row4: keypad-row-4 {
+	keypad_row4: keypad-row-4-pins {
 		samsung,pins = "gph3-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	keypad_row5: keypad-row-5 {
+	keypad_row5: keypad-row-5-pins {
 		samsung,pins = "gph3-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	keypad_row6: keypad-row-6 {
+	keypad_row6: keypad-row-6-pins {
 		samsung,pins = "gph3-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	keypad_row7: keypad-row-7 {
+	keypad_row7: keypad-row-7-pins {
 		samsung,pins = "gph3-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	keypad_col0: keypad-col-0 {
+	keypad_col0: keypad-col-0-pins {
 		samsung,pins = "gph2-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	keypad_col1: keypad-col-1 {
+	keypad_col1: keypad-col-1-pins {
 		samsung,pins = "gph2-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	keypad_col2: keypad-col-2 {
+	keypad_col2: keypad-col-2-pins {
 		samsung,pins = "gph2-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	keypad_col3: keypad-col-3 {
+	keypad_col3: keypad-col-3-pins {
 		samsung,pins = "gph2-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	keypad_col4: keypad-col-4 {
+	keypad_col4: keypad-col-4-pins {
 		samsung,pins = "gph2-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	keypad_col5: keypad-col-5 {
+	keypad_col5: keypad-col-5-pins {
 		samsung,pins = "gph2-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	keypad_col6: keypad-col-6 {
+	keypad_col6: keypad-col-6-pins {
 		samsung,pins = "gph2-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	keypad_col7: keypad-col-7 {
+	keypad_col7: keypad-col-7-pins {
 		samsung,pins = "gph2-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	sd0_clk: sd0-clk {
+	sd0_clk: sd0-clk-pins {
 		samsung,pins = "gpg0-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	sd0_cmd: sd0-cmd {
+	sd0_cmd: sd0-cmd-pins {
 		samsung,pins = "gpg0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	sd0_cd: sd0-cd {
+	sd0_cd: sd0-cd-pins {
 		samsung,pins = "gpg0-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	sd0_bus1: sd0-bus-width1 {
+	sd0_bus1: sd0-bus-width1-pins {
 		samsung,pins = "gpg0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	sd0_bus4: sd0-bus-width4 {
+	sd0_bus4: sd0-bus-width4-pins {
 		samsung,pins = "gpg0-3", "gpg0-4", "gpg0-5", "gpg0-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	sd0_bus8: sd0-bus-width8 {
+	sd0_bus8: sd0-bus-width8-pins {
 		samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	sd1_clk: sd1-clk {
+	sd1_clk: sd1-clk-pins {
 		samsung,pins = "gpg1-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	sd1_cmd: sd1-cmd {
+	sd1_cmd: sd1-cmd-pins {
 		samsung,pins = "gpg1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	sd1_cd: sd1-cd {
+	sd1_cd: sd1-cd-pins {
 		samsung,pins = "gpg1-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	sd1_bus1: sd1-bus-width1 {
+	sd1_bus1: sd1-bus-width1-pins {
 		samsung,pins = "gpg1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	sd1_bus4: sd1-bus-width4 {
+	sd1_bus4: sd1-bus-width4-pins {
 		samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	sd2_clk: sd2-clk {
+	sd2_clk: sd2-clk-pins {
 		samsung,pins = "gpg2-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	sd2_cmd: sd2-cmd {
+	sd2_cmd: sd2-cmd-pins {
 		samsung,pins = "gpg2-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	sd2_cd: sd2-cd {
+	sd2_cd: sd2-cd-pins {
 		samsung,pins = "gpg2-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	sd2_bus1: sd2-bus-width1 {
+	sd2_bus1: sd2-bus-width1-pins {
 		samsung,pins = "gpg2-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	sd2_bus4: sd2-bus-width4 {
+	sd2_bus4: sd2-bus-width4-pins {
 		samsung,pins = "gpg2-3", "gpg2-4", "gpg2-5", "gpg2-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	sd2_bus8: sd2-bus-width8 {
+	sd2_bus8: sd2-bus-width8-pins {
 		samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	sd3_clk: sd3-clk {
+	sd3_clk: sd3-clk-pins {
 		samsung,pins = "gpg3-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	sd3_cmd: sd3-cmd {
+	sd3_cmd: sd3-cmd-pins {
 		samsung,pins = "gpg3-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	sd3_cd: sd3-cd {
+	sd3_cd: sd3-cd-pins {
 		samsung,pins = "gpg3-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	sd3_bus1: sd3-bus-width1 {
+	sd3_bus1: sd3-bus-width1-pins {
 		samsung,pins = "gpg3-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	sd3_bus4: sd3-bus-width4 {
+	sd3_bus4: sd3-bus-width4-pins {
 		samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	eint0: ext-int0 {
+	eint0: ext-int0-pins {
 		samsung,pins = "gph0-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_F>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	eint8: ext-int8 {
+	eint8: ext-int8-pins {
 		samsung,pins = "gph1-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_F>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	eint15: ext-int15 {
+	eint15: ext-int15-pins {
 		samsung,pins = "gph1-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_F>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	eint16: ext-int16 {
+	eint16: ext-int16-pins {
 		samsung,pins = "gph2-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_F>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	eint31: ext-int31 {
+	eint31: ext-int31-pins {
 		samsung,pins = "gph3-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_F>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	cam_port_a_io: cam-port-a-io {
+	cam_port_a_io: cam-port-a-io-pins {
 		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
 				"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
 				"gpe1-0", "gpe1-1", "gpe1-2", "gpe1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	cam_port_a_clk_active: cam-port-a-clk-active {
+	cam_port_a_clk_active: cam-port-a-clk-active-pins {
 		samsung,pins = "gpe1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	cam_port_a_clk_idle: cam-port-a-clk-idle {
+	cam_port_a_clk_idle: cam-port-a-clk-idle-pins {
 		samsung,pins = "gpe1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_DOWN>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	cam_port_b_io: cam-port-b-io {
+	cam_port_b_io: cam-port-b-io-pins {
 		samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
 				"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
 				"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	cam_port_b_clk_active: cam-port-b-clk-active {
+	cam_port_b_clk_active: cam-port-b-clk-active-pins {
 		samsung,pins = "gpj1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	cam_port_b_clk_idle: cam-port-b-clk-idle {
+	cam_port_b_clk_idle: cam-port-b-clk-idle-pins {
 		samsung,pins = "gpj1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_DOWN>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-		lcd_ctrl: lcd-ctrl {
+	lcd_ctrl: lcd-ctrl-pins {
 		samsung,pins = "gpd0-0", "gpd0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	lcd_sync: lcd-sync {
+	lcd_sync: lcd-sync-pins {
 		samsung,pins = "gpf0-0", "gpf0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	lcd_clk: lcd-clk {
+	lcd_clk: lcd-clk-pins {
 		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	lcd_data24: lcd-data-width24 {
+	lcd_data24: lcd-data-width24-pins {
 		samsung,pins =  "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
 				"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
 				"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
 				"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
 				"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
 				"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 };
diff --git a/arch/arm/boot/dts/s5pv210-pinctrl.h b/arch/arm/boot/dts/s5pv210-pinctrl.h
new file mode 100644
index 000000000000..29bdf376d8f1
--- /dev/null
+++ b/arch/arm/boot/dts/s5pv210-pinctrl.h
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Samsung S5PV210 DTS pinctrl constants
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2022 Linaro Ltd
+ * Author: Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#ifndef __DTS_ARM_SAMSUNG_S5PV210_PINCTRL_H__
+#define __DTS_ARM_SAMSUNG_S5PV210_PINCTRL_H__
+
+#define S5PV210_PIN_PULL_NONE		0
+#define S5PV210_PIN_PULL_DOWN		1
+#define S5PV210_PIN_PULL_UP		2
+
+/* Pin function in power down mode */
+#define S5PV210_PIN_PDN_OUT0		0
+#define S5PV210_PIN_PDN_OUT1		1
+#define S5PV210_PIN_PDN_INPUT		2
+#define S5PV210_PIN_PDN_PREV		3
+
+#define S5PV210_PIN_DRV_LV1		0
+#define S5PV210_PIN_DRV_LV2		2
+#define S5PV210_PIN_DRV_LV3		1
+#define S5PV210_PIN_DRV_LV4		3
+
+#define S5PV210_PIN_FUNC_INPUT		0
+#define S5PV210_PIN_FUNC_OUTPUT		1
+#define S5PV210_PIN_FUNC_2		2
+#define S5PV210_PIN_FUNC_3		3
+#define S5PV210_PIN_FUNC_4		4
+#define S5PV210_PIN_FUNC_5		5
+#define S5PV210_PIN_FUNC_6		6
+#define S5PV210_PIN_FUNC_EINT		0xf
+#define S5PV210_PIN_FUNC_F		S5PV210_PIN_FUNC_EINT
+
+#endif /* __DTS_ARM_SAMSUNG_S5PV210_PINCTRL_H__ */
diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
index 353ba7b09a0c..12e90a1cc6a1 100644
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -117,7 +117,7 @@
 			};
 		};
 
-		pdma0: dma@e0900000 {
+		pdma0: dma-controller@e0900000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0xe0900000 0x1000>;
 			interrupt-parent = <&vic0>;
@@ -125,11 +125,9 @@
 			clocks = <&clocks CLK_PDMA0>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
 		};
 
-		pdma1: dma@e0a00000 {
+		pdma1: dma-controller@e0a00000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0xe0a00000 0x1000>;
 			interrupt-parent = <&vic0>;
@@ -137,8 +135,6 @@
 			clocks = <&clocks CLK_PDMA1>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
 		};
 
 		adc: adc@e1700000 {
@@ -239,8 +235,8 @@
 			reg = <0xeee30000 0x1000>;
 			interrupt-parent = <&vic2>;
 			interrupts = <16>;
-			dma-names = "rx", "tx", "tx-sec";
-			dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>;
+			dma-names = "tx", "rx", "tx-sec";
+			dmas = <&pdma1 10>, <&pdma1 9>, <&pdma1 11>;
 			clock-names = "iis",
 				      "i2s_opclk0",
 				      "i2s_opclk1";
@@ -259,8 +255,8 @@
 			reg = <0xe2100000 0x1000>;
 			interrupt-parent = <&vic2>;
 			interrupts = <17>;
-			dma-names = "rx", "tx";
-			dmas = <&pdma1 12>, <&pdma1 13>;
+			dma-names = "tx", "rx";
+			dmas = <&pdma1 13>, <&pdma1 12>;
 			clock-names = "iis", "i2s_opclk0";
 			clocks = <&clocks CLK_I2S1>, <&clocks SCLK_AUDIO1>;
 			pinctrl-names = "default";
@@ -274,8 +270,8 @@
 			reg = <0xe2a00000 0x1000>;
 			interrupt-parent = <&vic2>;
 			interrupts = <18>;
-			dma-names = "rx", "tx";
-			dmas = <&pdma1 14>, <&pdma1 15>;
+			dma-names = "tx", "rx";
+			dmas = <&pdma1 15>, <&pdma1 14>;
 			clock-names = "iis", "i2s_opclk0";
 			clocks = <&clocks CLK_I2S2>, <&clocks SCLK_AUDIO2>;
 			pinctrl-names = "default";
@@ -361,7 +357,7 @@
 			status = "disabled";
 		};
 
-		sdhci0: sdhci@eb000000 {
+		sdhci0: mmc@eb000000 {
 			compatible = "samsung,s3c6410-sdhci";
 			reg = <0xeb000000 0x100000>;
 			interrupt-parent = <&vic1>;
@@ -372,7 +368,7 @@
 			status = "disabled";
 		};
 
-		sdhci1: sdhci@eb100000 {
+		sdhci1: mmc@eb100000 {
 			compatible = "samsung,s3c6410-sdhci";
 			reg = <0xeb100000 0x100000>;
 			interrupt-parent = <&vic1>;
@@ -383,7 +379,7 @@
 			status = "disabled";
 		};
 
-		sdhci2: sdhci@eb200000 {
+		sdhci2: mmc@eb200000 {
 			compatible = "samsung,s3c6410-sdhci";
 			reg = <0xeb200000 0x100000>;
 			interrupt-parent = <&vic1>;
@@ -394,7 +390,7 @@
 			status = "disabled";
 		};
 
-		sdhci3: sdhci@eb300000 {
+		sdhci3: mmc@eb300000 {
 			compatible = "samsung,s3c6410-sdhci";
 			reg = <0xeb300000 0x100000>;
 			interrupt-parent = <&vic3>;
@@ -427,38 +423,28 @@
 			status = "disabled";
 		};
 
-		ehci: ehci@ec200000 {
+		ehci: usb@ec200000 {
 			compatible = "samsung,exynos4210-ehci";
 			reg = <0xec200000 0x100>;
 			interrupts = <23>;
 			interrupt-parent = <&vic1>;
 			clocks = <&clocks CLK_USB_HOST>;
 			clock-names = "usbhost";
-			#address-cells = <1>;
-			#size-cells = <0>;
+			phys = <&usbphy 1>;
+			phy-names = "host";
 			status = "disabled";
-
-			port@0 {
-				reg = <0>;
-				phys = <&usbphy 1>;
-			};
 		};
 
-		ohci: ohci@ec300000 {
+		ohci: usb@ec300000 {
 			compatible = "samsung,exynos4210-ohci";
 			reg = <0xec300000 0x100>;
 			interrupts = <23>;
 			interrupt-parent = <&vic1>;
 			clocks = <&clocks CLK_USB_HOST>;
 			clock-names = "usbhost";
-			#address-cells = <1>;
-			#size-cells = <0>;
+			phys = <&usbphy 1>;
+			phy-names = "host";
 			status = "disabled";
-
-			port@0 {
-				reg = <0>;
-				phys = <&usbphy 1>;
-			};
 		};
 
 		mfc: codec@f1700000 {
@@ -528,7 +514,7 @@
 			clock-names = "sclk_fimg2d", "fimg2d";
 		};
 
-		mdma1: mdma@fa200000 {
+		mdma1: dma-controller@fa200000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0xfa200000 0x1000>;
 			interrupt-parent = <&vic0>;
@@ -536,8 +522,6 @@
 			clocks = <&clocks CLK_MDMA>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <1>;
 		};
 
 		rotator: rotator@fa300000 {
diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi
index ec45ced3cde6..8f5477e307dd 100644
--- a/arch/arm/boot/dts/sam9x60.dtsi
+++ b/arch/arm/boot/dts/sam9x60.dtsi
@@ -12,6 +12,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 #include <dt-bindings/mfd/atmel-flexcom.h>
 
 / {
@@ -270,7 +271,7 @@
 				clock-names = "pclk", "gclk";
 			};
 
-			sha: sha@f002c000 {
+			sha: crypto@f002c000 {
 				compatible = "atmel,at91sam9g46-sha";
 				reg = <0xf002c000 0x100>;
 				interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -280,7 +281,6 @@
 				dma-names = "tx";
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
 				clock-names = "sha_clk";
-				status = "okay";
 			};
 
 			trng: trng@f0030000 {
@@ -288,10 +288,9 @@
 				reg = <0xf0030000 0x100>;
 				interrupts = <38 IRQ_TYPE_LEVEL_HIGH 0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
-				status = "okay";
 			};
 
-			aes: aes@f0034000 {
+			aes: crypto@f0034000 {
 				compatible = "atmel,at91sam9g46-aes";
 				reg = <0xf0034000 0x100>;
 				interrupts = <39 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -304,10 +303,9 @@
 				dma-names = "tx", "rx";
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
 				clock-names = "aes_clk";
-				status = "okay";
 			};
 
-			tdes: tdes@f0038000 {
+			tdes: crypto@f0038000 {
 				compatible = "atmel,at91sam9g46-tdes";
 				reg = <0xf0038000 0x100>;
 				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -320,7 +318,6 @@
 				dma-names = "tx", "rx";
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
 				clock-names = "tdes_clk";
-				status = "okay";
 			};
 
 			classd: classd@f003c000 {
@@ -468,7 +465,7 @@
 				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
 				#pwm-cells = <3>;
-				status="disabled";
+				status = "disabled";
 			};
 
 			hlcdc: hlcdc@f8038000 {
@@ -587,6 +584,7 @@
 			dbgu: serial@fffff200 {
 				compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <47 IRQ_TYPE_LEVEL_HIGH 7>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
@@ -671,7 +669,7 @@
 				clock-names = "td_slck", "md_slck", "main_xtal";
 			};
 
-			reset_controller: rstc@fffffe00 {
+			reset_controller: reset-controller@fffffe00 {
 				compatible = "microchip,sam9x60-rstc";
 				reg = <0xfffffe00 0x10>;
 				clocks = <&clk32k 0>;
@@ -688,7 +686,7 @@
 				status = "disabled";
 			};
 
-			rtt: rtt@fffffe20 {
+			rtt: rtc@fffffe20 {
 				compatible = "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt";
 				reg = <0xfffffe20 0x20>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 09c741e8ecb8..14c35c12a115 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/dma/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 #include <dt-bindings/iio/adc/at91-sama5d2_adc.h>
 
 / {
@@ -99,6 +100,16 @@
 		ranges = <0 0x00200000 0x20000>;
 	};
 
+	resistive_touch: resistive-touch {
+		compatible = "resistive-adc-touch";
+		io-channels = <&adc AT91_SAMA5D2_ADC_X_CHANNEL>,
+			      <&adc AT91_SAMA5D2_ADC_Y_CHANNEL>,
+			      <&adc AT91_SAMA5D2_ADC_P_CHANNEL>;
+		io-channel-names = "x", "y", "pressure";
+		touchscreen-min-pressure = <50000>;
+		status = "disabled";
+	};
+
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -306,7 +317,7 @@
 				status = "disabled";
 			};
 
-			sha@f0028000 {
+			sha: crypto@f0028000 {
 				compatible = "atmel,at91sam9g46-sha";
 				reg = <0xf0028000 0x100>;
 				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -316,10 +327,9 @@
 				dma-names = "tx";
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
 				clock-names = "sha_clk";
-				status = "okay";
 			};
 
-			aes@f002c000 {
+			aes: crypto@f002c000 {
 				compatible = "atmel,at91sam9g46-aes";
 				reg = <0xf002c000 0x100>;
 				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -332,7 +342,6 @@
 				dma-names = "tx", "rx";
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
 				clock-names = "aes_clk";
-				status = "okay";
 			};
 
 			spi0: spi@f8000000 {
@@ -376,8 +385,6 @@
 				interrupts = <5  IRQ_TYPE_LEVEL_HIGH 3		/* Queue 0 */
 					      66 IRQ_TYPE_LEVEL_HIGH 3          /* Queue 1 */
 					      67 IRQ_TYPE_LEVEL_HIGH 3>;        /* Queue 2 */
-				#address-cells = <1>;
-				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>, <&pmc PMC_TYPE_PERIPHERAL 5>;
 				clock-names = "hclk", "pclk";
 				status = "disabled";
@@ -415,7 +422,7 @@
 				pmecc: ecc-engine@f8014070 {
 					compatible = "atmel,sama5d2-pmecc";
 					reg = <0xf8014070 0x490>,
-					      <0xf8014500 0x100>;
+					      <0xf8014500 0x200>;
 				};
 			};
 
@@ -435,6 +442,7 @@
 			uart0: serial@f801c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf801c000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 7>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
@@ -451,6 +459,7 @@
 			uart1: serial@f8020000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8020000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 7>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
@@ -467,6 +476,7 @@
 			uart2: serial@f8024000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8024000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 7>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
@@ -524,6 +534,7 @@
 				uart5: serial@200 {
 					compatible = "atmel,at91sam9260-usart";
 					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
 					clock-names = "usart";
@@ -594,6 +605,7 @@
 				uart6: serial@200 {
 					compatible = "atmel,at91sam9260-usart";
 					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
 					clock-names = "usart";
@@ -662,7 +674,7 @@
 				ranges = <0 0xf8044000 0x1420>;
 			};
 
-			reset_controller: rstc@f8048000 {
+			reset_controller: reset-controller@f8048000 {
 				compatible = "atmel,sama5d3-rstc";
 				reg = <0xf8048000 0x10>;
 				clocks = <&clk32k>;
@@ -763,6 +775,7 @@
 			uart3: serial@fc008000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfc008000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 7>;
 				dmas = <&dma1
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
@@ -779,6 +792,7 @@
 			uart4: serial@fc00c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfc00c000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
 					 AT91_XDMAC_DT_PERID(43))>,
@@ -804,6 +818,7 @@
 				uart7: serial@200 {
 					compatible = "atmel,at91sam9260-usart";
 					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					interrupts = <21 IRQ_TYPE_LEVEL_HIGH 7>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
 					clock-names = "usart";
@@ -874,6 +889,7 @@
 				uart8: serial@200 {
 					compatible = "atmel,at91sam9260-usart";
 					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
 					clock-names = "usart";
@@ -945,6 +961,7 @@
 				uart9: serial@200 {
 					compatible = "atmel,at91sam9260-usart";
 					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
 					clock-names = "usart";
@@ -1052,16 +1069,6 @@
 				status = "disabled";
 			};
 
-			resistive_touch: resistive-touch {
-				compatible = "resistive-adc-touch";
-				io-channels = <&adc AT91_SAMA5D2_ADC_X_CHANNEL>,
-					      <&adc AT91_SAMA5D2_ADC_Y_CHANNEL>,
-					      <&adc AT91_SAMA5D2_ADC_P_CHANNEL>;
-				io-channel-names = "x", "y", "pressure";
-				touchscreen-min-pressure = <50000>;
-				status = "disabled";
-			};
-
 			pioA: pinctrl@fc038000 {
 				compatible = "atmel,sama5d2-pinctrl";
 				reg = <0xfc038000 0x600>;
@@ -1084,7 +1091,7 @@
 				#gpio-cells = <2>;
 			};
 
-			tdes@fc044000 {
+			tdes: crypto@fc044000 {
 				compatible = "atmel,at91sam9g46-tdes";
 				reg = <0xfc044000 0x100>;
 				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -1097,7 +1104,6 @@
 				dma-names = "tx", "rx";
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
 				clock-names = "tdes_clk";
-				status = "okay";
 			};
 
 			classd: classd@fc048000 {
@@ -1127,7 +1133,7 @@
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 55>, <&pmc PMC_TYPE_GCK 55>;
 				clock-names = "pclk", "gclk";
 				assigned-clocks = <&pmc PMC_TYPE_CORE PMC_I2S1_MUX>;
-				assigned-parrents = <&pmc PMC_TYPE_GCK 55>;
+				assigned-clock-parents = <&pmc PMC_TYPE_GCK 55>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index d1841bffe3c5..bde8e92d60bb 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -12,6 +12,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	#address-cells = <1>;
@@ -194,6 +195,7 @@
 			usart0: serial@f001c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf001c000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
 				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>,
 				       <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
@@ -208,6 +210,7 @@
 			usart1: serial@f0020000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf0020000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>;
 				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(5)>,
 				       <&dma0 2 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
@@ -222,6 +225,7 @@
 			uart0: serial@f0024000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf0024000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart0>;
@@ -356,6 +360,7 @@
 			usart2: serial@f8020000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8020000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
 				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(7)>,
 				       <&dma1 2 (AT91_DMA_CFG_PER_ID(8) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
@@ -370,6 +375,7 @@
 			usart3: serial@f8024000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8024000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
 				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(9)>,
 				       <&dma1 2 (AT91_DMA_CFG_PER_ID(10) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
@@ -381,7 +387,7 @@
 				status = "disabled";
 			};
 
-			sha@f8034000 {
+			sha: crypto@f8034000 {
 				compatible = "atmel,at91sam9g46-sha";
 				reg = <0xf8034000 0x100>;
 				interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -391,7 +397,7 @@
 				clock-names = "sha_clk";
 			};
 
-			aes@f8038000 {
+			aes: crypto@f8038000 {
 				compatible = "atmel,at91sam9g46-aes";
 				reg = <0xf8038000 0x100>;
 				interrupts = <43 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -402,7 +408,7 @@
 				clock-names = "aes_clk";
 			};
 
-			tdes@f803c000 {
+			tdes: crypto@f803c000 {
 				compatible = "atmel,at91sam9g46-tdes";
 				reg = <0xf803c000 0x100>;
 				interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -464,6 +470,7 @@
 			dbgu: serial@ffffee00 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xffffee00 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
 				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(13)>,
 				       <&dma1 2 (AT91_DMA_CFG_PER_ID(14) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
@@ -1003,7 +1010,7 @@
 				clock-names = "slow_clk", "main_xtal";
 			};
 
-			reset_controller: rstc@fffffe00 {
+			reset_controller: reset-controller@fffffe00 {
 				compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
 				reg = <0xfffffe00 0x10>;
 				clocks = <&clk32k>;
diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi
index a3eaba995cf4..44d1173f2ffb 100644
--- a/arch/arm/boot/dts/sama5d3_uart.dtsi
+++ b/arch/arm/boot/dts/sama5d3_uart.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	aliases {
@@ -39,6 +40,7 @@
 			uart0: serial@f0024000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf0024000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart0>;
@@ -50,6 +52,7 @@
 			uart1: serial@f8028000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8028000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart1>;
diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi
index a499de8a7a64..3652c9e24124 100644
--- a/arch/arm/boot/dts/sama5d3xmb.dtsi
+++ b/arch/arm/boot/dts/sama5d3xmb.dtsi
@@ -26,7 +26,7 @@
 			spi0: spi@f0004000 {
 				dmas = <0>, <0>;	/*  Do not use DMA for spi0 */
 
-				m25p80@0 {
+				flash@0 {
 					compatible = "atmel,at25df321a";
 					spi-max-frequency = <50000000>;
 					reg = <0>;
diff --git a/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi b/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi
index fa9e5e2a745d..5d9e97fecf83 100644
--- a/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi
+++ b/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi
@@ -25,7 +25,7 @@
 			spi0: spi@f0004000 {
 				dmas = <0>, <0>;	/*  Do not use DMA for spi0 */
 
-				m25p80@0 {
+				flash@0 {
 					compatible = "atmel,at25df321a";
 					spi-max-frequency = <50000000>;
 					reg = <0>;
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index f6e3e6f57252..af62157ae214 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -8,6 +8,7 @@
 
 #include <dt-bindings/clock/at91.h>
 #include <dt-bindings/dma/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
@@ -278,6 +279,7 @@
 			uart0: serial@f8004000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8004000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 5>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
@@ -437,6 +439,7 @@
 			usart0: serial@f802c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf802c000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
@@ -455,6 +458,7 @@
 			usart1: serial@f8030000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8030000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
@@ -490,6 +494,7 @@
 			uart1: serial@fc004000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfc004000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
@@ -508,6 +513,7 @@
 			usart2: serial@fc008000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfc008000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>;
 				dmas = <&dma1
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
@@ -526,6 +532,7 @@
 			usart3: serial@fc00c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfc00c000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 5>;
 				dmas = <&dma1
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
@@ -544,6 +551,7 @@
 			usart4: serial@fc010000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfc010000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <31 IRQ_TYPE_LEVEL_HIGH 5>;
 				dmas = <&dma1
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
@@ -673,7 +681,7 @@
 				status = "disabled";
 			};
 
-			aes@fc044000 {
+			aes: crypto@fc044000 {
 				compatible = "atmel,at91sam9g46-aes";
 				reg = <0xfc044000 0x100>;
 				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -684,10 +692,9 @@
 				dma-names = "tx", "rx";
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
 				clock-names = "aes_clk";
-				status = "okay";
 			};
 
-			tdes@fc04c000 {
+			tdes: crpyto@fc04c000 {
 				compatible = "atmel,at91sam9g46-tdes";
 				reg = <0xfc04c000 0x100>;
 				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -698,10 +705,9 @@
 				dma-names = "tx", "rx";
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
 				clock-names = "tdes_clk";
-				status = "okay";
 			};
 
-			sha@fc050000 {
+			sha: crypto@fc050000 {
 				compatible = "atmel,at91sam9g46-sha";
 				reg = <0xfc050000 0x100>;
 				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -710,7 +716,6 @@
 				dma-names = "tx";
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
 				clock-names = "sha_clk";
-				status = "okay";
 			};
 
 			hsmc: smc@fc05c000 {
@@ -729,7 +734,7 @@
 				};
 			};
 
-			reset_controller: rstc@fc068600 {
+			reset_controller: reset-controller@fc068600 {
 				compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
 				reg = <0xfc068600 0x10>;
 				clocks = <&clk32k>;
@@ -773,6 +778,7 @@
 			dbgu: serial@fc069000 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfc069000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
diff --git a/arch/arm/boot/dts/sama7g5-pinfunc.h b/arch/arm/boot/dts/sama7g5-pinfunc.h
index 4eb30445d205..6e87f0d4b8fc 100644
--- a/arch/arm/boot/dts/sama7g5-pinfunc.h
+++ b/arch/arm/boot/dts/sama7g5-pinfunc.h
@@ -261,7 +261,7 @@
 #define PIN_PB2__FLEXCOM6_IO0		PINMUX_PIN(PIN_PB2, 2, 1)
 #define PIN_PB2__ADTRG			PINMUX_PIN(PIN_PB2, 3, 1)
 #define PIN_PB2__A20			PINMUX_PIN(PIN_PB2, 4, 1)
-#define PIN_PB2__FLEXCOM11_IO0		PINMUX_PIN(PIN_PB2, 6, 3)
+#define PIN_PB2__FLEXCOM11_IO1		PINMUX_PIN(PIN_PB2, 6, 3)
 #define PIN_PB3				35
 #define PIN_PB3__GPIO			PINMUX_PIN(PIN_PB3, 0, 0)
 #define PIN_PB3__RF1			PINMUX_PIN(PIN_PB3, 1, 1)
diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi
index eddcfbf4d223..7bd8ae8e8d38 100644
--- a/arch/arm/boot/dts/sama7g5.dtsi
+++ b/arch/arm/boot/dts/sama7g5.dtsi
@@ -14,6 +14,7 @@
 #include <dt-bindings/clock/at91.h>
 #include <dt-bindings/dma/at91.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	model = "Microchip SAMA7G5 family SoC";
@@ -30,6 +31,44 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x0>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_CPUPLL>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu_opp_table>;
+		};
+	};
+
+	cpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-90000000 {
+			opp-hz = /bits/ 64 <90000000>;
+			opp-microvolt = <1050000 1050000 1225000>;
+			clock-latency-ns = <320000>;
+		};
+
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <1050000 1050000 1225000>;
+			clock-latency-ns = <320000>;
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1050000 1050000 1225000>;
+			clock-latency-ns = <320000>;
+			opp-suspend;
+		};
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1150000 1125000 1225000>;
+			clock-latency-ns = <320000>;
+		};
+
+		opp-1000000002 {
+			opp-hz = /bits/ 64 <1000000002>;
+			opp-microvolt = <1250000 1225000 1300000>;
+			clock-latency-ns = <320000>;
 		};
 	};
 
@@ -75,6 +114,45 @@
 		#size-cells = <1>;
 		ranges;
 
+		nfc_sram: sram@600000 {
+			compatible = "mmio-sram";
+			no-memory-wc;
+			reg = <0x00600000 0x2400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x00600000 0x2400>;
+		};
+
+		nfc_io: nfc-io@10000000 {
+			compatible = "atmel,sama5d3-nfc-io", "syscon";
+			reg = <0x10000000 0x8000000>;
+		};
+
+		ebi: ebi@40000000 {
+			compatible = "atmel,sama5d3-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&hsmc>;
+			reg = <0x40000000 0x20000000>;
+			ranges = <0x0 0x0 0x40000000 0x8000000
+				  0x1 0x0 0x48000000 0x8000000
+				  0x2 0x0 0x50000000 0x8000000
+				  0x3 0x0 0x58000000 0x8000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK1>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,sama5d3-nand-controller";
+				atmel,nfc-sram = <&nfc_sram>;
+				atmel,nfc-io = <&nfc_io>;
+				ecc-engine = <&pmecc>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+
 		securam: securam@e0000000 {
 			compatible = "microchip,sama7g5-securam", "atmel,sama5d2-securam", "mmio-sram";
 			reg = <0xe0000000 0x4000>;
@@ -83,7 +161,6 @@
 			#size-cells = <1>;
 			ranges = <0 0xe0000000 0x4000>;
 			no-memory-wc;
-			status = "okay";
 		};
 
 		secumod: secumod@e0004000 {
@@ -122,6 +199,13 @@
 			clock-names = "td_slck", "md_slck", "main_xtal";
 		};
 
+		reset_controller: reset-controller@e001d000 {
+			compatible = "microchip,sama7g5-rstc";
+			reg = <0xe001d000 0xc>, <0xe001d0e4 0x4>;
+			#reset-cells = <1>;
+			clocks = <&clk32k 0>;
+		};
+
 		shdwc: shdwc@e001d010 {
 			compatible = "microchip,sama7g5-shdwc", "syscon";
 			reg = <0xe001d010 0x10>;
@@ -133,7 +217,7 @@
 			status = "disabled";
 		};
 
-		rtt: rtt@e001d020 {
+		rtt: rtc@e001d020 {
 			compatible = "microchip,sama7g5-rtt", "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt";
 			reg = <0xe001d020 0x30>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
@@ -181,6 +265,22 @@
 			clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 		};
 
+		hsmc: hsmc@e0808000 {
+			compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd";
+			reg = <0xe0808000 0x1000>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pmecc: ecc-engine@e0808070 {
+				compatible = "atmel,sama5d2-pmecc";
+				reg = <0xe0808070 0x490>,
+				      <0xe0808500 0x200>;
+			};
+		};
+
 		qspi0: spi@e080c000 {
 			compatible = "microchip,sama7g5-ospi";
 			reg = <0xe080c000 0x400>, <0x20000000 0x10000000>;
@@ -211,6 +311,102 @@
 			status = "disabled";
 		};
 
+		can0: can@e0828000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0828000 0x100>, <0x100000 0x7800>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 61>, <&pmc PMC_TYPE_GCK 61>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 61>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x3400 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can1: can@e082c000 {
+			compatible = "bosch,m_can";
+			reg = <0xe082c000 0x100>, <0x100000 0xbc00>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 62>, <&pmc PMC_TYPE_GCK 62>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 62>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x7800 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can2: can@e0830000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0830000 0x100>, <0x100000 0x10000>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 63>, <&pmc PMC_TYPE_GCK 63>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 63>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0xbc00 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can3: can@e0834000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0834000 0x100>, <0x110000 0x4400>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 64>, <&pmc PMC_TYPE_GCK 64>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 64>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can4: can@e0838000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0838000 0x100>, <0x110000 0x8800>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 65>, <&pmc PMC_TYPE_GCK 65>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 65>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x4400 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can5: can@e083c000 {
+			compatible = "bosch,m_can";
+			reg = <0xe083c000 0x100>, <0x110000 0xcc00>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 66>, <&pmc PMC_TYPE_GCK 66>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 66>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x8800 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
 		adc: adc@e1000000 {
 			compatible = "microchip,sama7g5-adc";
 			reg = <0xe1000000 0x200>;
@@ -275,6 +471,30 @@
 			status = "disabled";
 		};
 
+		pdmc0: sound@e1608000 {
+			compatible = "microchip,sama7g5-pdmc";
+			reg = <0xe1608000 0x1000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			#sound-dai-cells = <0>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(37)>;
+			dma-names = "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 68>, <&pmc PMC_TYPE_GCK 68>;
+			clock-names = "pclk", "gclk";
+			status = "disabled";
+		};
+
+		pdmc1: sound@e160c000 {
+			compatible = "microchip,sama7g5-pdmc";
+			reg = <0xe160c000 0x1000>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			#sound-dai-cells = <0>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(38)>;
+			dma-names = "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 69>, <&pmc PMC_TYPE_GCK 69>;
+			clock-names = "pclk", "gclk";
+			status = "disabled";
+		};
+
 		spdifrx: spdifrx@e1614000 {
 			#sound-dai-cells = <0>;
 			compatible = "microchip,sama7g5-spdifrx";
@@ -322,6 +542,19 @@
 			status = "disabled";
 		};
 
+		eic: interrupt-controller@e1628000 {
+			compatible = "microchip,sama7g5-eic";
+			reg = <0xe1628000 0xec>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
+			clock-names = "pclk";
+			status = "disabled";
+		};
+
 		pit64b0: timer@e1800000 {
 			compatible = "microchip,sama7g5-pit64b", "microchip,sam9x60-pit64b";
 			reg = <0xe1800000 0x4000>;
@@ -338,6 +571,27 @@
 			clock-names = "pclk", "gclk";
 		};
 
+		aes: crypto@e1810000 {
+			compatible = "atmel,at91sam9g46-aes";
+			reg = <0xe1810000 0x100>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
+			clock-names = "aes_clk";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(1)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(2)>;
+			dma-names = "tx", "rx";
+		};
+
+		sha: crypto@e1814000 {
+			compatible = "atmel,at91sam9g46-sha";
+			reg = <0xe1814000 0x100>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 83>;
+			clock-names = "sha_clk";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(48)>;
+			dma-names = "tx";
+		};
+
 		flx0: flexcom@e1818000 {
 			compatible = "atmel,sama5d2-flexcom";
 			reg = <0xe1818000 0x200>;
@@ -350,6 +604,7 @@
 			uart0: serial@200 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0x200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
 				clock-names = "usart";
@@ -379,11 +634,9 @@
 				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
 				atmel,fifo-size = <32>;
-				dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
-					<&dma0 AT91_XDMAC_DT_PERID(8)>;
-				dma-names = "rx", "tx";
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>,
+					<&dma0 AT91_XDMAC_DT_PERID(7)>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 		};
@@ -400,6 +653,7 @@
 			uart3: serial@200 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0x200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
 				clock-names = "usart";
@@ -420,6 +674,17 @@
 			status = "disabled";
 		};
 
+		tdes: crypto@e2014000 {
+			compatible = "atmel,at91sam9g46-tdes";
+			reg = <0xe2014000 0x100>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 96>;
+			clock-names = "tdes_clk";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(54)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(53)>;
+			dma-names = "tx", "rx";
+		};
+
 		flx4: flexcom@e2018000 {
 			compatible = "atmel,sama5d2-flexcom";
 			reg = <0xe2018000 0x200>;
@@ -432,6 +697,7 @@
 			uart4: serial@200 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0x200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
 				clock-names = "usart";
@@ -457,6 +723,7 @@
 			uart7: serial@200 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0x200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
 				clock-names = "usart";
@@ -555,11 +822,9 @@
 				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
 				atmel,fifo-size = <32>;
-				dmas = <&dma0 AT91_XDMAC_DT_PERID(21)>,
-					<&dma0 AT91_XDMAC_DT_PERID(22)>;
-				dma-names = "rx", "tx";
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(22)>,
+					<&dma0 AT91_XDMAC_DT_PERID(21)>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 		};
@@ -581,11 +846,9 @@
 				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
 				atmel,fifo-size = <32>;
-				dmas = <&dma0 AT91_XDMAC_DT_PERID(23)>,
-					<&dma0 AT91_XDMAC_DT_PERID(24)>;
-				dma-names = "rx", "tx";
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(24)>,
+					<&dma0 AT91_XDMAC_DT_PERID(23)>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 		};
@@ -608,9 +871,9 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				atmel,fifo-size = <32>;
-				dmas = <&dma0 AT91_XDMAC_DT_PERID(27)>,
-					    <&dma0 AT91_XDMAC_DT_PERID(28)>;
-				dma-names = "rx", "tx";
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(28)>,
+					    <&dma0 AT91_XDMAC_DT_PERID(27)>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 		};
@@ -618,13 +881,11 @@
 		uddrc: uddrc@e3800000 {
 			compatible = "microchip,sama7g5-uddrc";
 			reg = <0xe3800000 0x4000>;
-			status = "okay";
 		};
 
 		ddr3phy: ddr3phy@e3804000 {
 			compatible = "microchip,sama7g5-ddr3phy";
 			reg = <0xe3804000 0x1000>;
-			status = "okay";
 		};
 
 		gic: interrupt-controller@e8c11000 {
@@ -632,7 +893,6 @@
 			#interrupt-cells = <3>;
 			#address-cells = <0>;
 			interrupt-controller;
-			interrupt-parent;
 			reg = <0xe8c11000 0x1000>,
 				<0xe8c12000 0x2000>;
 		};
diff --git a/arch/arm/boot/dts/sd5203.dts b/arch/arm/boot/dts/sd5203.dts
index a61a078ea042..69381819e07b 100644
--- a/arch/arm/boot/dts/sd5203.dts
+++ b/arch/arm/boot/dts/sd5203.dts
@@ -15,7 +15,7 @@
 	#size-cells = <1>;
 
 	chosen {
-		bootargs="console=ttyS0,9600 earlycon=uart8250,mmio32,0x1600d000";
+		bootargs = "console=ttyS0,9600 earlycon=uart8250,mmio32,0x1600d000";
 	};
 
 	aliases {
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index 7c1d6423d7f8..2459f3cd7dd9 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -46,7 +46,7 @@
 		      <0xff113000 0x1000>;
 	};
 
-	intc: intc@fffed000 {
+	intc: interrupt-controller@fffed000 {
 		compatible = "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
 		interrupt-controller;
@@ -80,8 +80,6 @@
 					     <0 110 4>,
 					     <0 111 4>;
 				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
 				clocks = <&l4_main_clk>;
 				clock-names = "apb_pclk";
 				resets = <&rst DMA_RESET>;
@@ -563,6 +561,12 @@
 			interrupts = <0 175 4>;
 		};
 
+		socfpga_axi_setup: stmmac-axi-config {
+			snps,wr_osr_lmt = <0xf>;
+			snps,rd_osr_lmt = <0xf>;
+			snps,blen = <0 0 0 0 16 0 0>;
+		};
+
 		gmac0: ethernet@ff700000 {
 			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
 			altr,sysmgr-syscon = <&sysmgr 0x60 0>;
@@ -578,6 +582,7 @@
 			snps,perfect-filter-entries = <128>;
 			tx-fifo-depth = <4096>;
 			rx-fifo-depth = <4096>;
+			snps,axi-config = <&socfpga_axi_setup>;
 			status = "disabled";
 		};
 
@@ -596,6 +601,7 @@
 			snps,perfect-filter-entries = <128>;
 			tx-fifo-depth = <4096>;
 			rx-fifo-depth = <4096>;
+			snps,axi-config = <&socfpga_axi_setup>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi
index 3ba431dfa8c9..4370e3cbbb4b 100644
--- a/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10.dtsi
@@ -38,7 +38,7 @@
 		      <0xff113000 0x1000>;
 	};
 
-	intc: intc@ffffd000 {
+	intc: interrupt-controller@ffffd000 {
 		compatible = "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
 		interrupt-controller;
@@ -73,8 +73,6 @@
 					     <0 90 IRQ_TYPE_LEVEL_HIGH>,
 					     <0 91 IRQ_TYPE_LEVEL_HIGH>;
 				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
 				clocks = <&l4_main_clk>;
 				clock-names = "apb_pclk";
 				resets = <&rst DMA_RESET>, <&rst DMA_OCP_RESET>;
@@ -738,6 +736,16 @@
 					     <37 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
+			sdmmca-ecc@ff8c2c00 {
+				compatible = "altr,socfpga-sdmmc-ecc";
+				reg = <0xff8c2c00 0x400>;
+				altr,ecc-parent = <&mmc>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
+					     <47 IRQ_TYPE_LEVEL_HIGH>,
+					     <16 IRQ_TYPE_LEVEL_HIGH>,
+					     <48 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
 			dma-ecc@ff8c8000 {
 				compatible = "altr,socfpga-dma-ecc";
 				reg = <0xff8c8000 0x400>;
diff --git a/arch/arm/boot/dts/socfpga_arria10_chameleonv3.dts b/arch/arm/boot/dts/socfpga_arria10_chameleonv3.dts
new file mode 100644
index 000000000000..422d00cd4c74
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_arria10_chameleonv3.dts
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2022 Google LLC
+ */
+/dts-v1/;
+#include "socfpga_arria10_mercury_aa1.dtsi"
+
+/ {
+	model = "Google Chameleon V3";
+	compatible = "google,chameleon-v3", "enclustra,mercury-aa1",
+		     "altr,socfpga-arria10", "altr,socfpga";
+
+	aliases {
+		serial0 = &uart0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+	};
+};
+
+&gmac0 {
+	status = "okay";
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	ssm2603: audio-codec@1a {
+		compatible = "adi,ssm2603";
+		reg = <0x1a>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	u80: gpio@21 {
+		compatible = "nxp,pca9535";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"SOM_AUD_MUTE",
+			"DP1_OUT_CEC_EN",
+			"DP2_OUT_CEC_EN",
+			"DP1_SOM_PS8469_CAD",
+			"DPD_SOM_PS8469_CAD",
+			"DP_OUT_PWR_EN",
+			"STM32_RST_L",
+			"STM32_BOOT0",
+
+			"FPGA_PROT",
+			"STM32_FPGA_COMM0",
+			"TP119",
+			"TP120",
+			"TP121",
+			"TP122",
+			"TP123",
+			"TP124";
+	};
+};
+
+&mmc {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts b/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dtsi
index 2a3364b26361..ad7cd14de6b6 100644
--- a/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts
+++ b/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dtsi
@@ -1,18 +1,18 @@
 // SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
+/*
+ * Copyright 2022 Google LLC
+ */
 
 #include "socfpga_arria10.dtsi"
 
 / {
 
 	model = "Enclustra Mercury AA1";
-	compatible = "altr,socfpga-arria10", "altr,socfpga";
+	compatible = "enclustra,mercury-aa1", "altr,socfpga-arria10", "altr,socfpga";
 
 	aliases {
 		ethernet0 = &gmac0;
 		serial1 = &uart1;
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
 	};
 
 	memory@0 {
@@ -26,24 +26,11 @@
 	};
 };
 
-&eccmgr {
-	sdmmca-ecc@ff8c2c00 {
-		compatible = "altr,socfpga-sdmmc-ecc";
-		reg = <0xff8c2c00 0x400>;
-		altr,ecc-parent = <&mmc>;
-		interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
-			     <47 IRQ_TYPE_LEVEL_HIGH>,
-			     <16 IRQ_TYPE_LEVEL_HIGH>,
-			     <48 IRQ_TYPE_LEVEL_HIGH>;
-	};
-};
-
 &gmac0 {
 	phy-mode = "rgmii";
 	phy-addr = <0xffffffff>; /* probe for phy addr */
 
 	max-frame-size = <3800>;
-	status = "okay";
 
 	phy-handle = <&phy3>;
 
@@ -69,22 +56,13 @@
 	};
 };
 
-&gpio0 {
-	status = "okay";
-};
-
-&gpio1 {
-	status = "okay";
-};
-
-&gpio2 {
-	status = "okay";
-};
-
 &i2c1 {
-	status = "okay";
+	atsha204a: crypto@64 {
+		compatible = "atmel,atsha204a";
+		reg = <0x64>;
+	};
+
 	isl12022: isl12022@6f {
-		status = "okay";
 		compatible = "isil,isl12022";
 		reg = <0x6f>;
 	};
@@ -92,7 +70,6 @@
 
 /* Following mappings are taken from arria10 socdk dts */
 &mmc {
-	status = "okay";
 	cap-sd-highspeed;
 	broken-cd;
 	bus-width = <4>;
@@ -101,12 +78,3 @@
 &osc1 {
 	clock-frequency = <33330000>;
 };
-
-&uart1 {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	dr_mode = "host";
-};
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
index 7edebe20e859..ec7365444a3b 100644
--- a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
@@ -6,7 +6,7 @@
 
 / {
 	model = "Altera SOCFPGA Arria 10";
-	compatible = "altr,socfpga-arria10", "altr,socfpga";
+	compatible = "altr,socfpga-arria10-socdk", "altr,socfpga-arria10", "altr,socfpga";
 
 	aliases {
 		ethernet0 = &gmac0;
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts
index 2a745522404d..11ccdc6c2dc6 100644
--- a/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts
@@ -9,7 +9,7 @@
 &qspi {
 	status = "okay";
 
-	flash0: n25q00@0 {
+	flash0: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "micron,mt25qu02g", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
index 1b02d46496a8..7f5458d8fccc 100644
--- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
@@ -7,7 +7,7 @@
 
 / {
 	model = "Altera SOCFPGA Arria V SoC Development Kit";
-	compatible = "altr,socfpga-arria5", "altr,socfpga";
+	compatible = "altr,socfpga-arria5-socdk", "altr,socfpga-arria5", "altr,socfpga";
 
 	chosen {
 		bootargs = "earlyprintk";
@@ -50,7 +50,7 @@
 		};
 	};
 
-	regulator_3_3v: 3-3-v-regulator {
+	regulator_3_3v: regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "3.3V";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_chameleon96.dts b/arch/arm/boot/dts/socfpga_cyclone5_chameleon96.dts
index f6561766d83f..76262f1e5e03 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_chameleon96.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_chameleon96.dts
@@ -24,7 +24,7 @@
 		reg = <0x0 0x20000000>; /* 512MB */
 	};
 
-	regulator_3_3v: 3-3-v-regulator {
+	regulator_3_3v: regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "3.3V";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts b/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts
index 67076e1b1c7f..c8f051fb2bf6 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts
@@ -24,7 +24,7 @@
 		ethernet0 = &gmac1;
 	};
 
-	regulator_3_3v: 3-3-v-regulator {
+	regulator_3_3v: regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "3.3V";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
index 51bb436784e2..b2241205c7a9 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
@@ -50,7 +50,7 @@
 		};
 	};
 
-	regulator_3_3v: 3-3-v-regulator {
+	regulator_3_3v: regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "3.3V";
 		regulator-min-microvolt = <3300000>;
@@ -121,7 +121,7 @@
 &qspi {
 	status = "okay";
 
-	flash0: n25q00@0 {
+	flash0: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "micron,mt25qu02g", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
index cae9ddd5ed38..3dd99c7c95e0 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
@@ -111,7 +111,7 @@
 		};
 	};
 
-	regulator_3_3v: vcc3p3-regulator {
+	regulator_3_3v: regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC3P3";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts b/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts
index 3f7aa7bf0863..2564671fc1c6 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts
@@ -26,7 +26,7 @@
 		ethernet0 = &gmac1;
 	};
 
-	regulator_3_3v: 3-3-v-regulator {
+	regulator_3_3v: regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "3.3V";
 		regulator-min-microvolt = <3300000>;
@@ -113,7 +113,7 @@
 &qspi {
 	status = "okay";
 
-	flash0: n25q512a@0 {
+	flash0: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "micron,n25q512a", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
index 25874e1b9c82..f24f17c2f5ee 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
@@ -221,7 +221,7 @@
 &qspi {
 	status = "okay";
 
-	n25q128@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "micron,n25q128", "jedec,spi-nor";
@@ -238,7 +238,7 @@
 		cdns,tslch-ns = <4>;
 	};
 
-	n25q00@1 {
+	flash@1 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "micron,mt25qu02g", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts
index 4cbadcb41084..05408df38203 100644
--- a/arch/arm/boot/dts/spear1310-evb.dts
+++ b/arch/arm/boot/dts/spear1310-evb.dts
@@ -170,7 +170,7 @@
 
 		smi: flash@ea000000 {
 			status = "okay";
-			clock-rate=<50000000>;
+			clock-rate = <50000000>;
 
 			flash@e6000000 {
 				#address-cells = <1>;
@@ -379,7 +379,7 @@
 					};
 				};
 
-				m25p80@1 {
+				flash@1 {
 					compatible = "st,m25p80";
 					reg = <1>;
 					spi-max-frequency = <12000000>;
diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts
index fd194ebeedc9..7700f2afc128 100644
--- a/arch/arm/boot/dts/spear1340-evb.dts
+++ b/arch/arm/boot/dts/spear1340-evb.dts
@@ -168,7 +168,7 @@
 
 		smi: flash@ea000000 {
 			status = "okay";
-			clock-rate=<50000000>;
+			clock-rate = <50000000>;
 
 			flash@e6000000 {
 				#address-cells = <1>;
@@ -439,7 +439,7 @@
 				cs-gpios = <&gpiopinctrl 80 0>, <&gpiopinctrl 24 0>,
 					   <&gpiopinctrl 85 0>;
 
-				m25p80@0 {
+				flash@0 {
 					compatible = "m25p80";
 					reg = <0>;
 					spi-max-frequency = <12000000>;
diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi
index 827e887afbda..818886e11713 100644
--- a/arch/arm/boot/dts/spear1340.dtsi
+++ b/arch/arm/boot/dts/spear1340.dtsi
@@ -88,7 +88,7 @@
 		};
 
 		pwm: pwm@e0180000 {
-			compatible ="st,spear13xx-pwm";
+			compatible = "st,spear13xx-pwm";
 			reg = <0xe0180000 0x1000>;
 			#pwm-cells = <2>;
 			status = "disabled";
@@ -134,9 +134,9 @@
 				reg = <0xb4100000 0x1000>;
 				interrupts = <0 105 0x4>;
 				status = "disabled";
-				dmas = <&dwdma0 12 0 1>,
-					<&dwdma0 13 1 0>;
-				dma-names = "tx", "rx";
+				dmas = <&dwdma0 13 0 1>,
+					<&dwdma0 12 1 0>;
+				dma-names = "rx", "tx";
 			};
 
 			thermal@e07008c4 {
diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi
index c87b881b2c8b..913553367687 100644
--- a/arch/arm/boot/dts/spear13xx.dtsi
+++ b/arch/arm/boot/dts/spear13xx.dtsi
@@ -284,9 +284,9 @@
 				#size-cells = <0>;
 				interrupts = <0 31 0x4>;
 				status = "disabled";
-				dmas = <&dwdma0 4 0 0>,
-					<&dwdma0 5 0 0>;
-				dma-names = "tx", "rx";
+				dmas = <&dwdma0 5 0 0>,
+					<&dwdma0 4 0 0>;
+				dma-names = "rx", "tx";
 			};
 
 			rtc@e0580000 {
diff --git a/arch/arm/boot/dts/spear300-evb.dts b/arch/arm/boot/dts/spear300-evb.dts
index 2beb30ca2cba..303ef29fb805 100644
--- a/arch/arm/boot/dts/spear300-evb.dts
+++ b/arch/arm/boot/dts/spear300-evb.dts
@@ -80,7 +80,7 @@
 
 		smi: flash@fc000000 {
 			status = "okay";
-			clock-rate=<50000000>;
+			clock-rate = <50000000>;
 
 			flash@f8000000 {
 				#address-cells = <1>;
diff --git a/arch/arm/boot/dts/spear310-evb.dts b/arch/arm/boot/dts/spear310-evb.dts
index 1c41e4a40334..ea0b53036f7b 100644
--- a/arch/arm/boot/dts/spear310-evb.dts
+++ b/arch/arm/boot/dts/spear310-evb.dts
@@ -94,7 +94,7 @@
 
 		smi: flash@fc000000 {
 			status = "okay";
-			clock-rate=<50000000>;
+			clock-rate = <50000000>;
 
 			flash@f8000000 {
 				#address-cells = <1>;
diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts
index c322407a0ade..3c026d021c92 100644
--- a/arch/arm/boot/dts/spear320-evb.dts
+++ b/arch/arm/boot/dts/spear320-evb.dts
@@ -95,7 +95,7 @@
 
 		smi: flash@fc000000 {
 			status = "okay";
-			clock-rate=<50000000>;
+			clock-rate = <50000000>;
 
 			flash@f8000000 {
 				#address-cells = <1>;
diff --git a/arch/arm/boot/dts/spear320-hmi.dts b/arch/arm/boot/dts/spear320-hmi.dts
index 367ba48aac3e..34503ac9c51c 100644
--- a/arch/arm/boot/dts/spear320-hmi.dts
+++ b/arch/arm/boot/dts/spear320-hmi.dts
@@ -167,7 +167,7 @@
 
 		smi: flash@fc000000 {
 			status = "okay";
-			clock-rate=<50000000>;
+			clock-rate = <50000000>;
 
 			flash@f8000000 {
 				#address-cells = <1>;
@@ -235,7 +235,6 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 					reg = <0x41>;
-					irq-over-gpio;
 					irq-gpios = <&gpiopinctrl 29 0x4>;
 					id = <0>;
 					blocks = <0x5>;
diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi
index 47ac4474ed96..b12474446a48 100644
--- a/arch/arm/boot/dts/spear320.dtsi
+++ b/arch/arm/boot/dts/spear320.dtsi
@@ -78,7 +78,7 @@
 		};
 
 		pwm: pwm@a8000000 {
-			compatible ="st,spear-pwm";
+			compatible = "st,spear-pwm";
 			reg = <0xa8000000 0x1000>;
 			#pwm-cells = <2>;
 			status = "disabled";
diff --git a/arch/arm/boot/dts/ste-ab8500.dtsi b/arch/arm/boot/dts/ste-ab8500.dtsi
index 2cf19386a525..dd30d08ccb9b 100644
--- a/arch/arm/boot/dts/ste-ab8500.dtsi
+++ b/arch/arm/boot/dts/ste-ab8500.dtsi
@@ -28,26 +28,28 @@
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 
 				ab8500_clock: clock-controller {
 					compatible = "stericsson,ab8500-clk";
 					#clock-cells = <1>;
 				};
 
-				ab8500_gpio: ab8500-gpiocontroller {
+				ab8500_gpio: gpio {
 					compatible = "stericsson,ab8500-gpio";
 					gpio-controller;
 					#gpio-cells = <2>;
 				};
 
-				ab8500-rtc {
+				rtc {
 					compatible = "stericsson,ab8500-rtc";
 					interrupts = <17 IRQ_TYPE_LEVEL_HIGH>,
 						     <18 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "60S", "ALARM";
 				};
 
-				gpadc: ab8500-gpadc {
+				gpadc: adc {
 					compatible = "stericsson,ab8500-gpadc";
 					interrupts = <32 IRQ_TYPE_LEVEL_HIGH>,
 						     <39 IRQ_TYPE_LEVEL_HIGH>;
@@ -120,13 +122,10 @@
 					};
 				};
 
-				ab8500_temp {
+				thermal {
 					compatible = "stericsson,abx500-temp";
 					interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "ABX500_TEMP_WARM";
-					io-channels = <&gpadc 0x06>,
-						      <&gpadc 0x07>;
-					io-channel-names = "aux1", "aux2";
 				};
 
 				ab8500_fg {
@@ -196,7 +195,7 @@
 							  "CH_WD_EXP",
 							  "VBUS_CH_DROP_END";
 					monitored-battery = <&battery>;
-					vddadc-supply	= <&ab8500_ldo_tvout_reg>;
+					vddadc-supply = <&ab8500_ldo_tvout_reg>;
 					io-channels = <&gpadc 0x03>,
 						      <&gpadc 0x0a>,
 						      <&gpadc 0x09>,
@@ -208,11 +207,11 @@
 				};
 
 				ab8500_chargalg {
-					compatible	= "stericsson,ab8500-chargalg";
-					monitored-battery	= <&battery>;
+					compatible = "stericsson,ab8500-chargalg";
+					monitored-battery = <&battery>;
 				};
 
-				ab8500_usb: ab8500_usb {
+				ab8500_usb: phy {
 					compatible = "stericsson,ab8500-usb";
 					interrupts = <90 IRQ_TYPE_LEVEL_HIGH>,
 						     <96 IRQ_TYPE_LEVEL_HIGH>,
@@ -236,7 +235,7 @@
 					#phy-cells = <0>;
 				};
 
-				ab8500-ponkey {
+				key {
 					compatible = "stericsson,ab8500-poweron-key";
 					interrupts = <6 IRQ_TYPE_LEVEL_HIGH>,
 						     <7 IRQ_TYPE_LEVEL_HIGH>;
@@ -247,29 +246,31 @@
 					compatible = "stericsson,ab8500-sysctrl";
 				};
 
-				ab8500-pwm-1 {
+				pwm@1 {
 					compatible = "stericsson,ab8500-pwm";
+					reg = <1>;
 					clocks = <&ab8500_clock AB8500_SYSCLK_INT>;
 					clock-names = "intclk";
+					#pwm-cells = <1>;
 				};
 
-				ab8500-pwm-2 {
+				pwm@2 {
 					compatible = "stericsson,ab8500-pwm";
+					reg = <2>;
 					clocks = <&ab8500_clock AB8500_SYSCLK_INT>;
 					clock-names = "intclk";
+					#pwm-cells = <1>;
 				};
 
-				ab8500-pwm-3 {
+				pwm@3 {
 					compatible = "stericsson,ab8500-pwm";
+					reg = <3>;
 					clocks = <&ab8500_clock AB8500_SYSCLK_INT>;
 					clock-names = "intclk";
+					#pwm-cells = <1>;
 				};
 
-				ab8500-debugfs {
-					compatible = "stericsson,ab8500-debug";
-				};
-
-				codec: ab8500-codec {
+				codec: codec {
 					compatible = "stericsson,ab8500-codec";
 
 					V-AUD-supply = <&ab8500_ldo_audio_reg>;
@@ -283,7 +284,7 @@
 					stericsson,earpeice-cmv = <950>; /* Units in mV. */
 				};
 
-				ext_regulators: ab8500-ext-regulators {
+				ext_regulators: regulator-external {
 					compatible = "stericsson,ab8500-ext-regulator";
 
 					ab8500_ext1_reg: ab8500_ext1 {
@@ -307,7 +308,7 @@
 					};
 				};
 
-				ab8500-regulators {
+				regulator {
 					compatible = "stericsson,ab8500-regulator";
 					vin-supply = <&ab8500_ext3_reg>;
 
diff --git a/arch/arm/boot/dts/ste-ab8505.dtsi b/arch/arm/boot/dts/ste-ab8505.dtsi
index e98335e9d1cb..131c82508e82 100644
--- a/arch/arm/boot/dts/ste-ab8505.dtsi
+++ b/arch/arm/boot/dts/ste-ab8505.dtsi
@@ -25,26 +25,28 @@
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 
 				ab8500_clock: clock-controller {
 					compatible = "stericsson,ab8500-clk";
 					#clock-cells = <1>;
 				};
 
-				ab8505_gpio: ab8505-gpiocontroller {
+				ab8505_gpio: gpio {
 					compatible = "stericsson,ab8505-gpio";
 					gpio-controller;
 					#gpio-cells = <2>;
 				};
 
-				ab8500-rtc {
+				rtc {
 					compatible = "stericsson,ab8500-rtc";
 					interrupts = <17 IRQ_TYPE_LEVEL_HIGH>,
 						     <18 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "60S", "ALARM";
 				};
 
-				gpadc: ab8500-gpadc {
+				gpadc: adc {
 					compatible = "stericsson,ab8500-gpadc";
 					interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "SW_CONV_END";
@@ -92,8 +94,13 @@
 					};
 				};
 
+				thermal {
+					compatible = "stericsson,abx500-temp";
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "ABX500_TEMP_WARM";
+				};
+
 				ab8500_fg {
-					status = "disabled";
 					compatible = "stericsson,ab8500-fg";
 					interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
 						     <8 IRQ_TYPE_LEVEL_HIGH>,
@@ -111,7 +118,6 @@
 				};
 
 				ab8500_btemp {
-					status = "disabled";
 					compatible = "stericsson,ab8500-btemp";
 					interrupts = <20 IRQ_TYPE_LEVEL_HIGH>,
 						     <80 IRQ_TYPE_LEVEL_HIGH>,
@@ -131,7 +137,6 @@
 				};
 
 				ab8500_charger {
-					status = "disabled";
 					compatible = "stericsson,ab8500-charger";
 					interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
 						     <11 IRQ_TYPE_LEVEL_HIGH>,
@@ -170,12 +175,11 @@
 				};
 
 				ab8500_chargalg {
-					status = "disabled";
 					compatible = "stericsson,ab8500-chargalg";
 					monitored-battery = <&battery>;
 				};
 
-				ab8500_usb: ab8500_usb {
+				ab8500_usb: phy {
 					compatible = "stericsson,ab8500-usb";
 					interrupts = <90 IRQ_TYPE_LEVEL_HIGH>,
 						     <96 IRQ_TYPE_LEVEL_HIGH>,
@@ -199,7 +203,7 @@
 					#phy-cells = <0>;
 				};
 
-				ab8500-ponkey {
+				key {
 					compatible = "stericsson,ab8500-poweron-key";
 					interrupts = <6 IRQ_TYPE_LEVEL_HIGH>,
 						     <7 IRQ_TYPE_LEVEL_HIGH>;
@@ -210,17 +214,15 @@
 					compatible = "stericsson,ab8500-sysctrl";
 				};
 
-				ab8500-pwm {
+				pwm@1 {
 					compatible = "stericsson,ab8500-pwm";
+					reg = <1>;
 					clocks = <&ab8500_clock AB8500_SYSCLK_INT>;
 					clock-names = "intclk";
+					#pwm-cells = <1>;
 				};
 
-				ab8500-debugfs {
-					compatible = "stericsson,ab8500-debug";
-				};
-
-				codec: ab8500-codec {
+				codec: codec {
 					compatible = "stericsson,ab8500-codec";
 
 					V-AUD-supply = <&ab8500_ldo_audio_reg>;
@@ -233,7 +235,7 @@
 					stericsson,earpeice-cmv = <950>; /* Units in mV. */
 				};
 
-				ab8505-regulators {
+				regulator {
 					compatible = "stericsson,ab8505-regulator";
 
 					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index dc0bcc7020f1..9afe8301bd47 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -661,7 +661,6 @@
 
 			#address-cells = <1>;
 			#size-cells = <0>;
-			v-i2c-supply = <&db8500_vape_reg>;
 
 			clock-frequency = <400000>;
 			clocks = <&prcc_kclk 3 3>, <&prcc_pclk 3 3>;
@@ -679,7 +678,6 @@
 
 			#address-cells = <1>;
 			#size-cells = <0>;
-			v-i2c-supply = <&db8500_vape_reg>;
 
 			clock-frequency = <400000>;
 
@@ -698,7 +696,6 @@
 
 			#address-cells = <1>;
 			#size-cells = <0>;
-			v-i2c-supply = <&db8500_vape_reg>;
 
 			clock-frequency = <400000>;
 
@@ -717,7 +714,6 @@
 
 			#address-cells = <1>;
 			#size-cells = <0>;
-			v-i2c-supply = <&db8500_vape_reg>;
 
 			clock-frequency = <400000>;
 
@@ -736,7 +732,6 @@
 
 			#address-cells = <1>;
 			#size-cells = <0>;
-			v-i2c-supply = <&db8500_vape_reg>;
 
 			clock-frequency = <400000>;
 
@@ -755,7 +750,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&prcc_kclk 3 1>, <&prcc_pclk 3 1>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 			dmas = <&dma 8 0 0x2>, /* Logical - DevToMem */
 			       <&dma 8 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
@@ -772,7 +767,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&prcc_kclk 3 2>, <&prcc_pclk 3 2>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 			dmas = <&dma 9 0 0x2>, /* Logical - DevToMem */
 			       <&dma 9 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
@@ -790,7 +785,7 @@
 			#size-cells = <0>;
 			/* Same clock wired to kernel and pclk */
 			clocks = <&prcc_pclk 2 8>, <&prcc_pclk 2 8>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 			dmas = <&dma 0 0 0x2>, /* Logical - DevToMem */
 			       <&dma 0 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
@@ -807,7 +802,7 @@
 			#size-cells = <0>;
 			/* Same clock wired to kernel and pclk */
 			clocks = <&prcc_pclk 2 2>, <&prcc_pclk 2 2>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 			dmas = <&dma 35 0 0x2>, /* Logical - DevToMem */
 			       <&dma 35 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
@@ -824,7 +819,7 @@
 			#size-cells = <0>;
 			/* Same clock wired to kernel and pclk */
 			clocks = <&prcc_pclk 2 1>, <&prcc_pclk 2 1>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 			dmas = <&dma 33 0 0x2>, /* Logical - DevToMem */
 			       <&dma 33 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
@@ -841,7 +836,7 @@
 			#size-cells = <0>;
 			/* Same clock wired to kernel and pclk */
 			clocks = <&prcc_pclk 1 7>, <&prcc_pclk 1 7>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 			dmas = <&dma 40 0 0x2>, /* Logical - DevToMem */
 			       <&dma 40 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
diff --git a/arch/arm/boot/dts/ste-href-ab8500.dtsi b/arch/arm/boot/dts/ste-href-ab8500.dtsi
index 3ccb7b5c7162..9fa024900d53 100644
--- a/arch/arm/boot/dts/ste-href-ab8500.dtsi
+++ b/arch/arm/boot/dts/ste-href-ab8500.dtsi
@@ -9,7 +9,7 @@
 	soc {
 		prcmu@80157000 {
 			ab8500 {
-				ab8500-gpiocontroller {
+				gpio {
 					/* Hog a few default settings */
 					pinctrl-names = "default";
 					pinctrl-0 = <&gpio2_default_mode>,
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 718752a0248e..8f1bb78fc1e4 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -16,7 +16,32 @@
 	battery: battery {
 		compatible = "simple-battery";
 		battery-type = "lithium-ion-polymer";
-		thermistor-on-batctrl;
+	};
+
+	thermal-zones {
+		battery-thermal {
+			/* This zone will be polled by the battery temperature code */
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	bat_therm: thermistor {
+		compatible = "murata,ncp18wb473";
+		io-channels = <&gpadc 0x02>; /* BatTemp */
+		pullup-uv = <1800000>;
+		pullup-ohm = <230000>;
+		pulldown-ohm = <0>;
+		#thermal-sensor-cells = <0>;
 	};
 
 	soc {
@@ -219,16 +244,16 @@
 
 		prcmu@80157000 {
 			ab8500 {
-				ab8500-gpiocontroller {
+				gpio {
 				};
 
-				ab8500_usb {
+				phy {
 					pinctrl-names = "default", "sleep";
 					pinctrl-0 = <&usb_a_1_default>;
 					pinctrl-1 = <&usb_a_1_sleep>;
 				};
 
-				ab8500-regulators {
+				regulator {
 					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
 						regulator-name = "V-DISPLAY";
 					};
diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
index 8f504edefd3f..e66fa59c2de6 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi
+++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
@@ -353,11 +353,11 @@
 					 * Drive DISP1 reset high (not reset), driver DISP2 reset low (reset)
 					 */
 					hrefv60_cfg1 {
-						pins ="GPIO65_F1";
+						pins = "GPIO65_F1";
 						ste,config = <&gpio_out_hi>;
 					};
 					hrefv60_cfg2 {
-						pins ="GPIO66_G3";
+						pins = "GPIO66_G3";
 						ste,config = <&gpio_out_lo>;
 					};
 				};
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index fb719c8a8eb2..e2f0cdacba7d 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -20,7 +20,32 @@
 	battery: battery {
 		compatible = "simple-battery";
 		battery-type = "lithium-ion-polymer";
-		thermistor-on-batctrl;
+	};
+
+	thermal-zones {
+		battery-thermal {
+			/* This zone will be polled by the battery temperature code */
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	bat_therm: thermistor {
+		compatible = "murata,ncp18wb473";
+		io-channels = <&gpadc 0x02>; /* BatTemp */
+		pullup-uv = <1800000>;
+		pullup-ohm = <230000>;
+		pulldown-ohm = <0>;
+		#thermal-sensor-cells = <0>;
 	};
 
 	en_3v3_reg: en_3v3 {
@@ -384,7 +409,7 @@
 
 		prcmu@80157000 {
 			ab8500 {
-				ab8500-gpiocontroller {
+				gpio {
 					/*
 					 * AB8500 GPIOs are numbered starting from 1, so the first
 					 * index 0 is what in the datasheet is called "GPIO1", and
@@ -406,13 +431,13 @@
 						     "PM_GPIO42"; /* AB8500 GPIO42 */
 				};
 
-				ab8500_usb {
+				phy {
 					pinctrl-names = "default", "sleep";
 					pinctrl-0 = <&usb_a_1_default>;
 					pinctrl-1 = <&usb_a_1_sleep>;
 				};
 
-				ext_regulators: ab8500-ext-regulators {
+				ext_regulators: regulator-external {
 					ab8500_ext1_reg: ab8500_ext1 {
 						regulator-name = "ab8500-ext-supply1";
 					};
@@ -426,7 +451,7 @@
 					};
 				};
 
-				ab8500-regulators {
+				regulator {
 					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
 						regulator-name = "V-DISPLAY";
 					};
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts b/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts
new file mode 100644
index 000000000000..27a3ab7e25e1
--- /dev/null
+++ b/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts
@@ -0,0 +1,793 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Devicetree for the Samsung Galaxy Exhibit SGH-T599 also known as Codina-TMO,
+ * the "TMO" shall be read "T-Mobile" as this phone was produced exlusively
+ * for T-Mobile in the United States.
+ *
+ * This phone is closely related to the Codina, but has:
+ * - No CPU speed cap, full ~1GHz rate
+ * - Different power management IC, AB8505
+ * - As AB8505 has a micro USB phy, no TI TSU6111
+ * - Different power routing such as the removal of the external LDO for the
+ *   touchscreen in favor of using the AB8505
+ * - Using a regulator for the key backlight LED
+ * - Using the Samsung S6D27A1 panel by default
+ * - The panel is using one of the ordinary AB8505 regulators for 1.8V
+ * - WiFi/Bluetooth combi chip upgraded to BCM4334
+ * - GPIO for backlight control moved from 68 to 69
+ */
+
+/dts-v1/;
+#include "ste-db8500.dtsi"
+#include "ste-ab8505.dtsi"
+#include "ste-dbx5x0-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Samsung Galaxy Exhibit (SGH-T599)";
+	compatible = "samsung,codina-tmo", "st-ericsson,u8500";
+
+	chosen {
+		stdout-path = &serial2;
+	};
+
+	battery: battery {
+		compatible = "samsung,eb425161lu";
+	};
+
+	thermal-zones {
+		battery-thermal {
+			/* This zone will be polled by the battery temperature code */
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	bat_therm: thermistor {
+		compatible = "samsung,1404-001221";
+		io-channels = <&gpadc 0x02>; /* BatTemp */
+		pullup-uv = <1800000>;
+		pullup-ohm = <230000>;
+		pulldown-ohm = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	/* TI TXS0206 level translator for 2.9 V */
+	sd_level_translator: regulator-gpio {
+		compatible = "regulator-fixed";
+
+		/* GPIO87 EN */
+		gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		regulator-name = "sd-level-translator";
+		regulator-min-microvolt = <2900000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-type = "voltage";
+
+		startup-delay-us = <200>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd_level_translator_default>;
+	};
+
+	/* External LDO MIC5366-3.3YMT for eMMC */
+	ldo_3v3_reg: regulator-gpio-ldo-3v3 {
+		compatible = "regulator-fixed";
+		/* Supplied in turn by VBAT */
+		regulator-name = "VMEM_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <5000>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&emmc_ldo_en_default_mode>;
+	};
+
+	/*
+	 * External Ricoh RP152L010B-TR LCD LDO regulator for the display.
+	 * LCD_PWR_EN controls both the 3.0V output.
+	 */
+	lcd_3v0_reg: regulator-gpio-lcd-3v0 {
+		compatible = "regulator-fixed";
+		/* Supplied in turn by VBAT */
+		regulator-name = "VREG_LCD_3.0V";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		/* GPIO219 controls this regulator */
+		gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pwr_en_default_mode>;
+	};
+
+	/*
+	 * This regulator is a GPIO line that drives the Broadcom WLAN
+	 * line WL_REG_ON high and enables the internal regulators
+	 * inside the chip. Unfortunatley it is erroneously named
+	 * WLAN_RST_N on the schematic but it is not a reset line.
+	 *
+	 * The voltage specified here is only used to determine the OCR mask,
+	 * the for the SDIO connector, the chip is actually connected
+	 * directly to VBAT.
+	 */
+	wl_reg: regulator-gpio-wlan {
+		compatible = "regulator-fixed";
+		regulator-name = "WL_REG_ON";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		startup-delay-us = <100000>;
+		/* GPIO215 (WLAN_RST_N to WL_REG_ON) */
+		gpio = <&gpio6 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_ldo_en_default>;
+	};
+
+	vibrator {
+		compatible = "gpio-vibrator";
+		/* GPIO195 "MOT_EN" */
+		enable-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vibrator_default>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default_mode>;
+
+		button-home {
+			linux,code = <KEY_HOME>;
+			label = "HOME";
+			/* GPIO91 */
+			gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
+		};
+		button-volup {
+			linux,code = <KEY_VOLUMEUP>;
+			label = "VOL+";
+			/* GPIO67 */
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+		};
+		button-voldown {
+			linux,code = <KEY_VOLUMEDOWN>;
+			label = "VOL-";
+			/* GPIO92 */
+			gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	led-touchkeys {
+		compatible = "regulator-led";
+		vled-supply = <&ab8500_ldo_aux4_reg>; // 3.3V
+		default-state = "on";
+		function = LED_FUNCTION_KBD_BACKLIGHT;
+		color = <LED_COLOR_ID_WHITE>;
+	};
+
+	ktd253: backlight {
+		compatible = "kinetic,ktd253";
+		/* GPIO69 is used on Codina R0.4 and Codina TMO */
+		enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+		/* Default to 13/32 brightness */
+		default-brightness = <13>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ktd253_backlight_default_mode>;
+	};
+
+	/* Richtek RT8515GQW Flash LED Driver IC */
+	flash {
+		compatible = "richtek,rt8515";
+		/* GPIO 140 */
+		enf-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+		/* GPIO 141 */
+		ent-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+		/*
+		 * RFS is 16 kOhm and RTS is 100 kOhm giving
+		 * the flash max current 343mA and torch max
+		 * current 55 mA.
+		 */
+		richtek,rfs-ohms = <16000>;
+		richtek,rts-ohms = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_flash_default_mode>;
+
+		led {
+			function = LED_FUNCTION_FLASH;
+			color = <LED_COLOR_ID_WHITE>;
+			flash-max-timeout-us = <250000>;
+			flash-max-microamp = <343750>;
+			led-max-microamp = <55000>;
+		};
+	};
+
+	/* Bit-banged I2C on GPIO143 and GPIO144 also called "SUBPMU I2C" */
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio4 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio4 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_gpio_0_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* TODO: this should also be used by the SM5103 Camera power management unit */
+	};
+
+	/* Bit-banged I2C on GPIO151 and GPIO152 also called "COMP I2C" */
+	i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio4 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio4 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_gpio_1_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		magnetometer@c {
+			compatible = "alps,hscdtd008a";
+			reg = <0x0c>;
+			clock-frequency = <400000>;
+
+			avdd-supply = <&ab8500_ldo_aux1_reg>; // 3V
+			dvdd-supply = <&ab8500_ldo_aux8_reg>; // 1.8V
+		};
+	};
+
+	spi-gpio-0 {
+		compatible = "spi-gpio";
+		/* Clock on GPIO220, pin SCL */
+		sck-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>;
+		/* MOSI on GPIO224, pin SDI "slave data in" */
+		mosi-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+		/* MISO on GPIO225, pin SDO "slave data out" */
+		miso-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+		/* Chip select on GPIO201 */
+		cs-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi_gpio_0_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		panel@0 {
+			compatible = "samsung,s6d27a1";
+			spi-max-frequency = <1200000>;
+			/* TYPE 3: inverse clock polarity and phase */
+			spi-cpha;
+			spi-cpol;
+
+			reg = <0>;
+			vci-supply = <&lcd_3v0_reg>;
+			vccio-supply = <&ab8500_ldo_aux6_reg>;
+
+			/* Reset on GPIO139 */
+			reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+			/* LCD_VGH/LCD_DETECT, ESD IRQ on GPIO93 */
+			interrupt-parent = <&gpio2>;
+			interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&panel_default_mode>;
+			backlight = <&ktd253>;
+
+			port {
+				panel_in: endpoint {
+					remote-endpoint = <&display_out>;
+				};
+			};
+		};
+	};
+
+	soc {
+		/* External Micro SD slot */
+		mmc@80126000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			st,sig-pin-fbclk;
+			full-pwr-cycle;
+			/* MMC is powered by AUX3 1.2V .. 2.91V */
+			vmmc-supply = <&ab8500_ldo_aux3_reg>;
+			/* 2.9 V level translator is using AUX3 at 2.9 V as well */
+			vqmmc-supply = <&sd_level_translator>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc0_a_2_default>;
+			pinctrl-1 = <&mc0_a_2_sleep>;
+			cd-gpios  = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
+			status = "okay";
+		};
+
+		/* WLAN SDIO channel */
+		mmc@80118000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <4>;
+			non-removable;
+			cap-sd-highspeed;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc1_a_2_default>;
+			pinctrl-1 = <&mc1_a_2_sleep>;
+			/*
+			 * GPIO-controlled voltage enablement: this drives
+			 * the WL_REG_ON line high when we use this device.
+			 * Represented as regulator to fill OCR mask.
+			 */
+			vmmc-supply = <&wl_reg>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			wifi@1 {
+				compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac";
+				reg = <1>;
+				/* GPIO216 WL_HOST_WAKE */
+				interrupt-parent = <&gpio6>;
+				interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+				interrupt-names = "host-wake";
+				pinctrl-names = "default";
+				pinctrl-0 = <&wlan_default_mode>;
+			};
+		};
+
+		/* eMMC */
+		mmc@80005000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <8>;
+			non-removable;
+			cap-mmc-highspeed;
+			mmc-ddr-1_8v;
+			no-sdio;
+			no-sd;
+			vmmc-supply = <&ldo_3v3_reg>;
+			pinctrl-names = "default", "sleep";
+			/*
+			 * GPIO130 will be set to input no pull-up resulting in a resistor
+			 * pulling the reset high and taking the memory out of reset.
+			 */
+			pinctrl-0 = <&mc2_a_1_default>;
+			pinctrl-1 = <&mc2_a_1_sleep>;
+			status = "okay";
+		};
+
+		/* GBF (Bluetooth) UART */
+		uart@80120000 {
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u0_a_1_default>;
+			pinctrl-1 = <&u0_a_1_sleep>;
+			status = "okay";
+
+			bluetooth {
+				/* BCM4334B0 actually */
+				compatible = "brcm,bcm4330-bt";
+				/* GPIO222 rail BT_VREG_EN to BT_REG_ON */
+				shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
+				/* BT_WAKE on GPIO199 */
+				device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+				/* BT_HOST_WAKE on GPIO97 */
+				/* FIXME: convert to interrupt */
+				host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+				/* BT_RST_N on GPIO209 */
+				reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&bluetooth_default_mode>;
+			};
+		};
+
+		/* GPS UART */
+		uart@80121000 {
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			/* CTS/RTS is not used, CTS is repurposed as GPIO */
+			pinctrl-0 = <&u1rxtx_a_1_default>;
+			pinctrl-1 = <&u1rxtx_a_1_sleep>;
+			/* FIXME: add a device for the GPS here */
+		};
+
+		/* Debugging console UART connected to AB8505 */
+		uart@80007000 {
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u2rxtx_c_1_default>;
+			pinctrl-1 = <&u2rxtx_c_1_sleep>;
+		};
+
+		prcmu@80157000 {
+			ab8505 {
+				phy {
+					pinctrl-names = "default", "sleep";
+					pinctrl-0 = <&usb_a_1_default>;
+					pinctrl-1 = <&usb_a_1_sleep>;
+				};
+
+				ab8500_fg {
+					line-impedance-micro-ohms = <36000>;
+				};
+
+				/* This is mostly identical to the Codina v0.4 regulators */
+				regulator {
+					ab8500_ldo_aux1 {
+						regulator-name = "v-sensors-vdd";
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux2 {
+						regulator-name = "v-aux2";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux3 {
+						regulator-name = "v-mmc-sd";
+					};
+
+					ab8500_ldo_aux4 {
+						regulator-name = "v-aux4";
+						/*
+						 * Providing some span here makes the touchkey
+						 * LEDs actually dimmable.
+						 */
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux5 {
+						regulator-name = "v-aux5";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					ab8500_ldo_aux6 {
+						/* 1.8 V to the display */
+						regulator-name = "v-aux6";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					ab8500_ldo_aux8 {
+						regulator-name = "v-sensors-vio";
+					};
+				};
+			};
+		};
+
+		/* I2C0 also known as "AGC I2C" */
+		i2c@80004000 {
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c0_a_1_default>;
+			pinctrl-1 = <&i2c0_a_1_sleep>;
+
+			proximity@39 {
+				/* Codina has the Amstaos TMD2672 */
+				compatible = "amstaos,tmd2672";
+				clock-frequency = <400000>;
+				reg = <0x39>;
+
+				/* IRQ on GPIO146 "PS_INT" */
+				interrupt-parent = <&gpio4>;
+				interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&ab8500_ldo_aux8_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&tmd2672_codina_default>;
+			};
+		};
+
+		/* I2C2 on GPIO10 and GPIO11 also called "SENSORS I2C" */
+		i2c@80128000 {
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c2_b_2_default>;
+			pinctrl-1 = <&i2c2_b_2_sleep>;
+
+			/* Bosch BMA254 accelerometer */
+			accelerometer@18 {
+				compatible = "bosch,bma254";
+				reg = <0x18>;
+				mount-matrix = "0", "1", "0",
+					       "-1", "0", "0",
+					       "0", "0", "1";
+				vddio-supply = <&ab8500_ldo_aux8_reg>; // 1.8V
+				vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V
+			};
+		};
+
+		/* I2C3 */
+		i2c@80110000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c3_c_2_default>;
+			pinctrl-1 = <&i2c3_c_2_sleep>;
+
+			/* TODO: write bindings and driver for this touchscreen */
+
+			/* Zinitix BT404 ISP part */
+			isp@50 {
+				compatible = "zinitix,bt404-isp";
+				reg = <0x50>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&tsp_default>;
+			};
+
+			/* Zinitix BT404 touchscreen, also has the touchkeys for menu and back */
+			touchscreen@20 {
+				compatible = "zinitix,bt404";
+				reg = <0x20>;
+				/* GPIO218 (TSP_INT_1V8) */
+				interrupt-parent = <&gpio6>;
+				interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+				vcca-supply = <&ab8500_ldo_aux2_reg>; // 3.3V
+				vdd-supply = <&ab8500_ldo_aux5_reg>; // 1.8V
+				zinitix,mode = <2>;
+				touchscreen-size-x = <480>;
+				touchscreen-size-y = <800>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&tsp_default>;
+			};
+		};
+
+		mcde@a0350000 {
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&dpi_default_mode>;
+
+			port {
+				display_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	/*
+	 * This extends the MC0_A_2 default config to include
+	 * the card detect GPIO217 line.
+	 */
+	sdi0 {
+		mc0_a_2_default {
+			default_cfg4 {
+				pins = "GPIO217_AH12"; /* card detect */
+				ste,config = <&gpio_in_pd>;
+			};
+		};
+	};
+	sdi2 {
+		/*
+		 * GPIO130 should be set in GPIO mode and
+		 * pulled down. (Not connected.)
+		 */
+		mc2_a_1_default {
+			default_cfg2 {
+				pins = "GPIO130_C8"; /* FBCLK */
+				ste,config = <&gpio_in_pd>;
+			};
+		};
+	};
+	/* GPIO that enables the 2.9V SD card level translator */
+	sd-level-translator {
+		sd_level_translator_default: sd_level_translator_default {
+			/* level shifter on GPIO87 */
+			codina_cfg1 {
+				pins = "GPIO87_B3";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	/* GPIO that enables the LDO regulator for the eMMC */
+	emmc-ldo {
+		emmc_ldo_en_default_mode: emmc_ldo_default {
+			/* LDO enable on GPIO223 */
+			codina_cfg1 {
+				pins = "GPIO223_AH9";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	/* GPIOs for panel control */
+	panel {
+		panel_default_mode: panel_default {
+			codina_cfg1 {
+				/* Reset line */
+				pins = "GPIO139_C9";
+				ste,config = <&gpio_out_lo>;
+			};
+			codina_cfg2 {
+				/* ESD IRQ line "LCD detect" */
+				pins = "GPIO93_B7";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	/* GPIO that enables the LDO regulator for the LCD display */
+	lcd-ldo {
+		lcd_pwr_en_default_mode: lcd_pwr_en_default {
+			/* LCD_PWR_EN on GPIO219 */
+			codina_cfg1 {
+				pins = "GPIO219_AG10";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	/* GPIO that enables the WLAN internal LDO regulators */
+	wlan-ldo {
+		wlan_ldo_en_default: wlan_ldo_default {
+			/* GPIO215 named WLAN_RST_N */
+			codina_cfg1 {
+				pins = "GPIO215_AH13";
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	/* Backlight GPIO */
+	backlight {
+		ktd253_backlight_default_mode: backlight_default {
+			skomer_cfg1 {
+				pins = "GPIO69_E2"; /* LCD_BL_CTRL */
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	/* Flash and torch */
+	flash {
+		gpio_flash_default_mode: flash_default {
+			codina_cfg1 {
+				pins = "GPIO140_B11", "GPIO141_C12";
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	/* GPIO keys */
+	gpio-keys {
+		gpio_keys_default_mode: gpio_keys_default {
+			skomer_cfg1 {
+				pins = "GPIO67_G2", /* VOL UP */
+				       "GPIO91_B6", /* HOME */
+				       "GPIO92_D6"; /* VOL DOWN */
+				ste,config = <&gpio_in_pu>;
+			};
+		};
+	};
+	/* Interrupt line for the Zinitix BT404 touchscreen */
+	tsp {
+		tsp_default: tsp_default {
+			codina_cfg1 {
+				pins = "GPIO218_AH11";	/* TSP_INT_1V8 */
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	/* Interrupt line for light/proximity sensor TMD2672 */
+	tmd2672 {
+		tmd2672_codina_default: tmd2672_codina {
+			codina_cfg1 {
+				pins = "GPIO146_D13";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	/* GPIO-based I2C bus for subpmu */
+	i2c-gpio-0 {
+		i2c_gpio_0_default: i2c_gpio_0 {
+			codina_cfg1 {
+				pins = "GPIO143_D12", "GPIO144_B13";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	/* GPIO-based I2C bus for the NFC */
+	i2c-gpio-1 {
+		i2c_gpio_1_default: i2c_gpio_1 {
+			codina_cfg1 {
+				pins = "GPIO151_D17", "GPIO152_D16";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	/* GPIO-based SPI bus for the display */
+	spi-gpio-0 {
+		spi_gpio_0_default: spi_gpio_0_d {
+			codina_cfg1 {
+				pins = "GPIO220_AH10", "GPIO201_AF24", "GPIO224_AG9";
+				ste,config = <&gpio_out_hi>;
+			};
+			codina_cfg2 {
+				pins = "GPIO225_AG8";
+				/* Needs pull down, no pull down resistor on board */
+				ste,config = <&gpio_in_pd>;
+			};
+		};
+		spi_gpio_0_sleep: spi_gpio_0_s {
+			codina_cfg1 {
+				pins = "GPIO220_AH10", "GPIO201_AF24",
+				       "GPIO224_AG9", "GPIO225_AG8";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	wlan {
+		wlan_default_mode: wlan_default {
+			/* GPIO216 for WL_HOST_WAKE */
+			codina_cfg2 {
+				pins = "GPIO216_AG12";
+				ste,config = <&gpio_in_pd>;
+			};
+		};
+	};
+	bluetooth {
+		bluetooth_default_mode: bluetooth_default {
+			/* GPIO199 BT_WAKE and GPIO222 BT_VREG_ON */
+			codina_cfg1 {
+				pins = "GPIO199_AH23", "GPIO222_AJ9";
+				ste,config = <&gpio_out_lo>;
+			};
+			/* GPIO97 BT_HOST_WAKE */
+			codina_cfg2 {
+				pins = "GPIO97_D9";
+				ste,config = <&gpio_in_nopull>;
+			};
+			/* GPIO209 BT_RST_N */
+			codina_cfg3 {
+				pins = "GPIO209_AG15";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	vibrator {
+		vibrator_default: vibrator_default {
+			codina_cfg1 {
+				pins = "GPIO195_AG28";	/* MOT_EN */
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	mcde {
+		dpi_default_mode: dpi_default {
+			default_mux1 {
+				/* Mux in all the data lines */
+				function = "lcd";
+				groups =
+					/* Data lines D0-D7 GPIO70..GPIO77 */
+					"lcd_d0_d7_a_1",
+					/* Data lines D8-D11 GPIO78..GPIO81 */
+					"lcd_d8_d11_a_1",
+					/* Data lines D12-D15 GPIO82..GPIO85 */
+					"lcd_d12_d15_a_1",
+					/* Data lines D16-D23 GPIO161..GPIO168 */
+					"lcd_d16_d23_b_1";
+			};
+			default_mux2 {
+				function = "lcda";
+				/* Clock line on GPIO150, DE, VSO, HSO on GPIO169..GPIO171 */
+				groups = "lcdaclk_b_1", "lcda_b_1";
+			};
+			/* Input, no pull-up is the default state for pins used for an alt function */
+			default_cfg1 {
+				pins = "GPIO150_C14", "GPIO169_D22", "GPIO170_C23", "GPIO171_D23";
+				ste,config = <&in_nopull>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
index fbd60065542d..b88f0c07873d 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
@@ -9,9 +9,13 @@
  * the boot loader.
  *
  * The Samsung tree further talks about GT-I8160P and GT-I8160chn (China).
- * The GT-I8160 plain is knonw as the "europe" variant.
- * The GT-I8160P appears to not use the ST Microelectronics accelerometer.
+ * The GT-I8160 plain is known as the "europe" variant.
+ * The GT-I8160P is the CDMA version and it appears to not use the ST
+ * Microelectronics accelerometer and reportedly has NFC mounted.
  * The GT-I8160chn appears to be the same as the europe variant.
+ *
+ * There is also the Codina-TMO, Samsung SGH-T599, which has its own device
+ * tree.
  */
 
 /dts-v1/;
@@ -47,6 +51,32 @@
 		compatible = "samsung,eb425161lu";
 	};
 
+	thermal-zones {
+		battery-thermal {
+			/* This zone will be polled by the battery temperature code */
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	bat_therm: thermistor {
+		compatible = "samsung,1404-001221";
+		io-channels = <&gpadc 0x02>; /* BatTemp */
+		pullup-uv = <1800000>;
+		pullup-ohm = <230000>;
+		pulldown-ohm = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+
 	/* TI TXS0206 level translator for 2.9 V */
 	sd_level_translator: regulator-gpio {
 		compatible = "regulator-fixed";
@@ -285,7 +315,22 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		/* TODO: add the NFC chip here */
+		nfc@2b {
+			/* NXP NFC circuit PN544 C1 marked NXP 44501  */
+			compatible = "nxp,pn544-i2c";
+			/* IF0, IF1 high, gives I2C address 0x2B */
+			reg = <0x2b>;
+			clock-frequency = <400000>;
+			/* NFC IRQ on GPIO32 */
+			interrupt-parent = <&gpio1>;
+			interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+			/* GPIO 31 */
+			firmware-gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+			/* GPIO88 */
+			enable-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pn544_codina_default>;
+		};
 	};
 
 	spi-gpio-0 {
@@ -443,10 +488,20 @@
 		uart@80121000 {
 			status = "okay";
 			pinctrl-names = "default", "sleep";
-			/* CTS/RTS is not used, CTS is repurposed as GPIO */
-			pinctrl-0 = <&u1rxtx_a_1_default>;
-			pinctrl-1 = <&u1rxtx_a_1_sleep>;
-			/* FIXME: add a device for the GPS here */
+			pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>;
+			pinctrl-1 = <&u1rxtx_a_1_sleep &u1ctsrts_a_1_sleep>;
+
+			gnss {
+				compatible = "brcm,bcm4751";
+				/* GPS_RSTN on GPIO21 */
+				reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+				/* GPS_ON_OFF on GPIO86 */
+				enable-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+				/* GPS_1V8 (VSMPS2) */
+				vddio-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&bcm4751_codina_default>;
+			};
 		};
 
 		/* Debugging console UART connected to TSU6111RSVR (FSA880) */
@@ -459,13 +514,17 @@
 
 		prcmu@80157000 {
 			ab8500 {
-				ab8500_usb {
+				phy {
 					pinctrl-names = "default", "sleep";
 					pinctrl-0 = <&usb_a_1_default>;
 					pinctrl-1 = <&usb_a_1_sleep>;
 				};
 
-				ab8500-regulators {
+				ab8500_fg {
+					line-impedance-micro-ohms = <36000>;
+				};
+
+				regulator {
 					ab8500_ldo_aux1 {
 						/* Used for VDD for sensors */
 						regulator-name = "V-SENSORS-VDD";
@@ -497,10 +556,9 @@
 			pinctrl-0 = <&i2c0_a_1_default>;
 			pinctrl-1 = <&i2c0_a_1_sleep>;
 
-			/* TODO: write bindings and driver for this proximity sensor */
 			proximity@39 {
-				/* Codina has the Mouser TMD2672 */
-				compatible = "mouser,tmd2672";
+				/* Codina has the Amstaos TMD2672 */
+				compatible = "amstaos,tmd2672";
 				clock-frequency = <400000>;
 				reg = <0x39>;
 
@@ -548,8 +606,8 @@
 				reg = <0x19>;
 				vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V
 				vddio-supply = <&ab8500_ldo_aux2_reg>; // 1.8V
-				mount-matrix = "0", "-1", "0",
-					       "1", "0", "0",
+				mount-matrix = "0", "1", "0",
+					       "-1", "0", "0",
 					       "0", "0", "1";
 			};
 		};
@@ -829,6 +887,34 @@
 			};
 		};
 	};
+	nfc {
+		pn544_codina_default: pn544_codina {
+			/* Interrupt line */
+			codina_cfg1 {
+				pins = "GPIO32_V2";
+				ste,config = <&gpio_in_nopull>;
+			};
+			/* Enable and firmware GPIOs */
+			codina_cfg2 {
+				pins = "GPIO31_V3", "GPIO88_C4";
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	bcm4751 {
+		bcm4751_codina_default: bcm4751_codina {
+			/* Reset line, start out asserted */
+			codina_cfg1 {
+				pins = "GPIO21_AB3";
+				ste,config = <&gpio_out_lo>;
+			};
+			/* GPS_ON_OFF, start out deasserted (off) */
+			codina_cfg2 {
+				pins = "GPIO86_C6";
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
 	vibrator {
 		vibrator_default: vibrator_default {
 			codina_cfg1 {
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts
index 1c0e5cfeddac..7231bc745200 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts
@@ -24,6 +24,32 @@
 		compatible = "samsung,eb585157lu";
 	};
 
+	thermal-zones {
+		battery-thermal {
+			/* This zone will be polled by the battery temperature code */
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	bat_therm: thermistor {
+		compatible = "samsung,1404-001221";
+		io-channels = <&gpadc 0x02>; /* BatTemp */
+		pullup-uv = <1800000>;
+		pullup-ohm = <230000>;
+		pulldown-ohm = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+
 	/* TI TXS0206 level translator for 2.9 V */
 	sd_level_translator: regulator-gpio {
 		compatible = "regulator-fixed";
@@ -432,13 +458,17 @@
 
 		prcmu@80157000 {
 			ab8500 {
-				ab8500_usb {
+				phy {
 					pinctrl-names = "default", "sleep";
 					pinctrl-0 = <&usb_a_1_default>;
 					pinctrl-1 = <&usb_a_1_sleep>;
 				};
 
-				ab8500-regulators {
+				ab8500_fg {
+					line-impedance-micro-ohms = <43000>;
+				};
+
+				regulator {
 					ab8500_ldo_aux1 {
 						/* Used for VDD for sensors */
 						regulator-name = "V-SENSORS-VDD";
@@ -505,8 +535,8 @@
 					accelerometer@18 {
 						compatible = "bosch,bma222e";
 						reg = <0x18>;
-						mount-matrix = "0", "1", "0",
-							       "-1", "0", "0",
+						mount-matrix = "0", "-1", "0",
+							       "1", "0", "0",
 							       "0", "0", "1";
 						vddio-supply = <&ab8500_ldo_aux2_reg>; // 1.8V
 						vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
index fc4c5166d85b..9604695edf53 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
@@ -29,6 +29,32 @@
 		compatible = "samsung,eb-l1m7flu";
 	};
 
+	thermal-zones {
+		battery-thermal {
+			/* This zone will be polled by the battery temperature code */
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	bat_therm: thermistor {
+		compatible = "samsung,1404-001221";
+		io-channels = <&gpadc 0x02>; /* BatTemp */
+		pullup-uv = <1800000>;
+		pullup-ohm = <230000>;
+		pulldown-ohm = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+
 	i2c-gpio-0 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpio2 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
@@ -280,13 +306,17 @@
 
 		prcmu@80157000 {
 			ab8505 {
-				ab8500_usb {
+				phy {
 					pinctrl-names = "default", "sleep";
 					pinctrl-0 = <&usb_a_1_default>;
 					pinctrl-1 = <&usb_a_1_sleep>;
 				};
 
-				ab8505-regulators {
+				ab8500_fg {
+					line-impedance-micro-ohms = <36000>;
+				};
+
+				regulator {
 					ab8500_ldo_aux1 {
 						regulator-name = "sensor_3v";
 						regulator-min-microvolt = <3000000>;
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
index 5ddcbc1a855d..69387e8754a9 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
@@ -24,6 +24,32 @@
 		compatible = "samsung,eb535151vu";
 	};
 
+	thermal-zones {
+		battery-thermal {
+			/* This zone will be polled by the battery temperature code */
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	bat_therm: thermistor {
+		compatible = "samsung,1404-001221";
+		io-channels = <&gpadc 0x02>; /* BatTemp */
+		pullup-uv = <1800000>;
+		pullup-ohm = <230000>;
+		pulldown-ohm = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+
 	/* External LDO for eMMC LDO VMEM_3V3 controlled by GPIO6 */
 	ldo_3v3_reg: regulator-gpio-ldo-3v3 {
 		compatible = "regulator-fixed";
@@ -467,7 +493,26 @@
 			/* CTS/RTS is not used, CTS is repurposed as GPIO */
 			pinctrl-0 = <&u1rxtx_a_1_default>;
 			pinctrl-1 = <&u1rxtx_a_1_sleep>;
-			/* FIXME: add a device for the GPS here */
+
+			gnss {
+				/*
+				 * The Low Noise Amplifier (LNA) power and enablement is controlled
+				 * autonomously by the GSD4t.
+				 * Janice has a SiRFstarIV-based GSD4t
+				 * Golden has a SiRFstarV 5t-based CSRG05TA03-ICJE-R.
+				 */
+				compatible = "csr,gsd4t";
+				/* GPS_RSTN on GPIO21 */
+				reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+				/* GPS_ON_OFF on GPIO96 */
+				sirf,onoff-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+				/* GPS_1V8 (VSMPS2) */
+				vcc-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&gsd4t_janice_default>;
+				/* According to /etc/sirfgps.conf */
+				current-speed = <460800>;
+			};
 		};
 
 		/* Debugging console UART connected to TSU6111RSVR (FSA880) */
@@ -480,13 +525,17 @@
 
 		prcmu@80157000 {
 			ab8500 {
-				ab8500_usb {
+				phy {
 					pinctrl-names = "default", "sleep";
 					pinctrl-0 = <&usb_a_1_default>;
 					pinctrl-1 = <&usb_a_1_sleep>;
 				};
 
-				ab8500-regulators {
+				ab8500_fg {
+					line-impedance-micro-ohms = <15000>;
+				};
+
+				regulator {
 					ab8500_ldo_aux1 {
 						/* Used for VDD for sensors */
 						regulator-name = "V-SENSORS-VDD";
@@ -592,9 +641,9 @@
 					accelerometer@8 {
 						compatible = "bosch,bma222";
 						reg = <0x08>;
-						mount-matrix = "0", "1", "0",
-							       "-1", "0", "0",
-							       "0", "0", "-1";
+						mount-matrix = "0", "-1", "0",
+							       "1", "0", "0",
+							       "0", "0", "1";
 						vddio-supply = <&ab8500_ldo_aux2_reg>; // 1.8V
 						vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V
 					};
@@ -923,4 +972,23 @@
 			};
 		};
 	};
+	gsd4t {
+		gsd4t_janice_default: gsd4t_janice {
+			/* Reset line, start out asserted */
+			janice_cfg1 {
+				pins = "GPIO21_AB3";
+				ste,config = <&gpio_out_lo>;
+			};
+			/* GPS_ON_OFF, start out deasserted (off) */
+			janice_cfg2 {
+				pins = "GPIO96_D8";
+				ste,config = <&gpio_out_lo>;
+			};
+			/* Unused power enablement line, used in R0.0 and R0.1 boards */
+			janice_cfg3 {
+				pins = "GPIO86_C6";
+				ste,config = <&gpio_in_pd>;
+			};
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts b/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts
index 9ec3f85b1a18..167846df3104 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts
@@ -28,6 +28,32 @@
 		compatible = "samsung,eb425161la";
 	};
 
+	thermal-zones {
+		battery-thermal {
+			/* This zone will be polled by the battery temperature code */
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	bat_therm: thermistor {
+		compatible = "samsung,1404-001221";
+		io-channels = <&gpadc 0x02>; /* BatTemp */
+		pullup-uv = <1800000>;
+		pullup-ohm = <230000>;
+		pulldown-ohm = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+
 	/* TI TXS0206 level translator for 2.9 V */
 	sd_level_translator: regulator-gpio {
 		compatible = "regulator-fixed";
@@ -301,13 +327,17 @@
 
 		prcmu@80157000 {
 			ab8505 {
-				ab8500_usb {
+				phy {
 					pinctrl-names = "default", "sleep";
 					pinctrl-0 = <&usb_a_1_default>;
 					pinctrl-1 = <&usb_a_1_sleep>;
 				};
 
-				ab8505-regulators {
+				ab8500_fg {
+					line-impedance-micro-ohms = <36000>;
+				};
+
+				regulator {
 					ab8500_ldo_aux1 {
 						/* Used for VDD for sensors */
 						regulator-name = "AUX1";
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
index 580ca497f312..93e5f5ed888d 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
@@ -24,6 +24,32 @@
 		compatible = "samsung,eb485159lu";
 	};
 
+	thermal-zones {
+		battery-thermal {
+			/* This zone will be polled by the battery temperature code */
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	bat_therm: thermistor {
+		compatible = "samsung,1404-001221";
+		io-channels = <&gpadc 0x02>; /* BatTemp */
+		pullup-uv = <1800000>;
+		pullup-ohm = <230000>;
+		pulldown-ohm = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+
 	/* TI TXS0206 level translator for 2.9 V */
 	sd_level_translator: regulator-gpio {
 		compatible = "regulator-fixed";
@@ -185,10 +211,6 @@
 			cap-sd-highspeed;
 			cap-mmc-highspeed;
 			/* All direction control is used */
-			st,sig-dir-cmd;
-			st,sig-dir-dat0;
-			st,sig-dir-dat2;
-			st,sig-dir-dat31;
 			st,sig-pin-fbclk;
 			full-pwr-cycle;
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;
@@ -267,12 +289,27 @@
 			};
 		};
 
-		/* GPF UART */
+		/* GPS UART */
 		uart@80121000 {
 			status = "okay";
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>;
 			pinctrl-1 = <&u1rxtx_a_1_sleep &u1ctsrts_a_1_sleep>;
+
+			gnss {
+				/* The CSRG05TA03-ICJE-R is a SirfStarV 5t chip */
+				compatible = "csr,csrg05ta03-icje-r";
+				/* GPS_RSTN on GPIO209 */
+				reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>;
+				/* GPS_ON_OFF on GPIO86 */
+				sirf,onoff-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+				/* GPS_1V8 (VSMPS2) */
+				vcc-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&g05ta03_skomer_default>;
+				/* According to /etc/sirfgps.conf */
+				current-speed = <460800>;
+			};
 		};
 
 		/* Debugging console UART connected to AB8505 USB */
@@ -285,13 +322,17 @@
 
 		prcmu@80157000 {
 			ab8505 {
-				ab8500_usb {
+				phy {
 					pinctrl-names = "default", "sleep";
 					pinctrl-0 = <&usb_a_1_default>;
 					pinctrl-1 = <&usb_a_1_sleep>;
 				};
 
-				ab8505-regulators {
+				ab8500_fg {
+					line-impedance-micro-ohms = <16000>;
+				};
+
+				regulator {
 					ab8500_ldo_aux1 {
 						/* Used for VDD for sensors */
 						regulator-name = "AUX1";
@@ -635,6 +676,20 @@
 			};
 		};
 	};
+	g05ta03 {
+		g05ta03_skomer_default: g05ta03 {
+			/* Reset line, start out de-asserted */
+			skomer_cfg1 {
+				pins = "GPIO209_AG15";
+				ste,config = <&gpio_out_hi>;
+			};
+			/* GPS_ON_OFF, start out deasserted (off) */
+			skomer_cfg2 {
+				pins = "GPIO86_C6";
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
 };
 
 &ab8505_gpio {
diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi
index 9cce9541e26b..350bcfcf498b 100644
--- a/arch/arm/boot/dts/stih407-clock.dtsi
+++ b/arch/arm/boot/dts/stih407-clock.dtsi
@@ -29,7 +29,7 @@
 		 */
 		clockgen-a9@92b0000 {
 			compatible = "st,clkgen-c32";
-			reg = <0x92b0000 0xffff>;
+			reg = <0x92b0000 0x10000>;
 
 			clockgen_a9_pll: clockgen-a9-pll {
 				#clock-cells = <1>;
@@ -37,32 +37,27 @@
 
 				clocks = <&clk_sysin>;
 			};
-		};
 
-		/*
-		 * ARM CPU related clocks.
-		 */
-		clk_m_a9: clk-m-a9@92b0000 {
-			#clock-cells = <0>;
-			compatible = "st,stih407-clkgen-a9-mux";
-			reg = <0x92b0000 0x10000>;
-
-			clocks = <&clockgen_a9_pll 0>,
-				 <&clockgen_a9_pll 0>,
-				 <&clk_s_c0_flexgen 13>,
-				 <&clk_m_a9_ext2f_div2>;
+			clk_m_a9: clk-m-a9 {
+				#clock-cells = <0>;
+				compatible = "st,stih407-clkgen-a9-mux";
 
+				clocks = <&clockgen_a9_pll 0>,
+					 <&clockgen_a9_pll 0>,
+					 <&clk_s_c0_flexgen 13>,
+					 <&clk_m_a9_ext2f_div2>;
 
-			/*
-			 * ARM Peripheral clock for timers
-			 */
-			arm_periph_clk: clk-m-a9-periphs {
-				#clock-cells = <0>;
-				compatible = "fixed-factor-clock";
+				/*
+				 * ARM Peripheral clock for timers
+				 */
+				arm_periph_clk: clk-m-a9-periphs {
+					#clock-cells = <0>;
+					compatible = "fixed-factor-clock";
 
-				clocks = <&clk_m_a9>;
-				clock-div = <2>;
-				clock-mult = <1>;
+					clocks = <&clk_m_a9>;
+					clock-div = <2>;
+					clock-mult = <1>;
+				};
 			};
 		};
 
@@ -87,14 +82,6 @@
 			};
 		};
 
-		clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
-			#clock-cells = <1>;
-			compatible = "st,quadfs-pll";
-			reg = <0x9103000 0x1000>;
-
-			clocks = <&clk_sysin>;
-		};
-
 		clk_s_c0: clockgen-c@9103000 {
 			compatible = "st,clkgen-c32";
 			reg = <0x9103000 0x1000>;
@@ -113,6 +100,13 @@
 				clocks = <&clk_sysin>;
 			};
 
+			clk_s_c0_quadfs: clk-s-c0-quadfs {
+				#clock-cells = <1>;
+				compatible = "st,quadfs-pll";
+
+				clocks = <&clk_sysin>;
+			};
+
 			clk_s_c0_flexgen: clk-s-c0-flexgen {
 				#clock-cells = <1>;
 				compatible = "st,flexgen", "st,flexgen-stih407-c0";
@@ -142,18 +136,17 @@
 			};
 		};
 
-		clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
-			#clock-cells = <1>;
-			compatible = "st,quadfs-d0";
-			reg = <0x9104000 0x1000>;
-
-			clocks = <&clk_sysin>;
-		};
-
 		clockgen-d0@9104000 {
 			compatible = "st,clkgen-c32";
 			reg = <0x9104000 0x1000>;
 
+			clk_s_d0_quadfs: clk-s-d0-quadfs {
+				#clock-cells = <1>;
+				compatible = "st,quadfs-d0";
+
+				clocks = <&clk_sysin>;
+			};
+
 			clk_s_d0_flexgen: clk-s-d0-flexgen {
 				#clock-cells = <1>;
 				compatible = "st,flexgen", "st,flexgen-stih407-d0";
@@ -166,18 +159,17 @@
 			};
 		};
 
-		clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
-			#clock-cells = <1>;
-			compatible = "st,quadfs-d2";
-			reg = <0x9106000 0x1000>;
-
-			clocks = <&clk_sysin>;
-		};
-
 		clockgen-d2@9106000 {
 			compatible = "st,clkgen-c32";
 			reg = <0x9106000 0x1000>;
 
+			clk_s_d2_quadfs: clk-s-d2-quadfs {
+				#clock-cells = <1>;
+				compatible = "st,quadfs-d2";
+
+				clocks = <&clk_sysin>;
+			};
+
 			clk_s_d2_flexgen: clk-s-d2-flexgen {
 				#clock-cells = <1>;
 				compatible = "st,flexgen", "st,flexgen-stih407-d2";
@@ -192,18 +184,17 @@
 			};
 		};
 
-		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
-			#clock-cells = <1>;
-			compatible = "st,quadfs-d3";
-			reg = <0x9107000 0x1000>;
-
-			clocks = <&clk_sysin>;
-		};
-
 		clockgen-d3@9107000 {
 			compatible = "st,clkgen-c32";
 			reg = <0x9107000 0x1000>;
 
+			clk_s_d3_quadfs: clk-s-d3-quadfs {
+				#clock-cells = <1>;
+				compatible = "st,quadfs-d3";
+
+				clocks = <&clk_sysin>;
+			};
+
 			clk_s_d3_flexgen: clk-s-d3-flexgen {
 				#clock-cells = <1>;
 				compatible = "st,flexgen", "st,flexgen-stih407-d3";
diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index 21f3347a91d6..5ebb77947fd9 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -115,37 +115,140 @@
 		status = "okay";
 	};
 
-	soc {
+	restart: restart-controller {
+		compatible = "st,stih407-restart";
+		st,syscfg = <&syscfg_sbc_reg>;
+		status = "okay";
+	};
+
+	powerdown: powerdown-controller {
+		compatible = "st,stih407-powerdown";
+		#reset-cells = <1>;
+	};
+
+	softreset: softreset-controller {
+		compatible = "st,stih407-softreset";
+		#reset-cells = <1>;
+	};
+
+	picophyreset: picophyreset-controller {
+		compatible = "st,stih407-picophyreset";
+		#reset-cells = <1>;
+	};
+
+	irq-syscfg {
+		compatible = "st,stih407-irq-syscfg";
+		st,syscfg = <&syscfg_core>;
+		st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
+				<ST_IRQ_SYSCFG_PMU_1>;
+		st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
+				<ST_IRQ_SYSCFG_DISABLED>;
+	};
+
+	usb2_picophy0: phy1 {
+		compatible = "st,stih407-usb2-phy";
+		#phy-cells = <0>;
+		st,syscfg = <&syscfg_core 0x100 0xf4>;
+		resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+			 <&picophyreset STIH407_PICOPHY2_RESET>;
+		reset-names = "global", "port";
+	};
+
+	miphy28lp_phy: miphy28lp {
+		compatible = "st,miphy28lp-phy";
+		st,syscfg = <&syscfg_core>;
 		#address-cells = <1>;
 		#size-cells = <1>;
-		interrupt-parent = <&intc>;
 		ranges;
-		compatible = "simple-bus";
 
-		restart: restart-controller@0 {
-			compatible = "st,stih407-restart";
-			reg = <0 0>;
-			st,syscfg = <&syscfg_sbc_reg>;
-			status = "okay";
-		};
+		phy_port0: port@9b22000 {
+			reg = <0x9b22000 0xff>,
+			      <0x9b09000 0xff>,
+			      <0x9b04000 0xff>;
+			reg-names = "sata-up",
+				    "pcie-up",
+				    "pipew";
+
+			st,syscfg = <0x114 0x818 0xe0 0xec>;
+			#phy-cells = <1>;
 
-		powerdown: powerdown-controller@0 {
-			compatible = "st,stih407-powerdown";
-			reg = <0 0>;
-			#reset-cells = <1>;
+			reset-names = "miphy-sw-rst";
+			resets = <&softreset STIH407_MIPHY0_SOFTRESET>;
 		};
 
-		softreset: softreset-controller@0 {
-			compatible = "st,stih407-softreset";
-			reg = <0 0>;
-			#reset-cells = <1>;
+		phy_port1: port@9b2a000 {
+			reg = <0x9b2a000 0xff>,
+			      <0x9b19000 0xff>,
+			      <0x9b14000 0xff>;
+			reg-names = "sata-up",
+				    "pcie-up",
+				    "pipew";
+
+			st,syscfg = <0x118 0x81c 0xe4 0xf0>;
+
+			#phy-cells = <1>;
+
+			reset-names = "miphy-sw-rst";
+			resets = <&softreset STIH407_MIPHY1_SOFTRESET>;
 		};
 
-		picophyreset: picophyreset-controller@0 {
-			compatible = "st,stih407-picophyreset";
-			reg = <0 0>;
-			#reset-cells = <1>;
+		phy_port2: port@8f95000 {
+			reg = <0x8f95000 0xff>,
+			      <0x8f90000 0xff>;
+			reg-names = "pipew",
+				    "usb3-up";
+
+			st,syscfg = <0x11c 0x820>;
+
+			#phy-cells = <1>;
+
+			reset-names = "miphy-sw-rst";
+			resets = <&softreset STIH407_MIPHY2_SOFTRESET>;
 		};
+	};
+
+	st231_gp0: st231-gp0 {
+		compatible = "st,st231-rproc";
+		memory-region = <&gp0_reserved>;
+		resets = <&softreset STIH407_ST231_GP0_SOFTRESET>;
+		reset-names = "sw_reset";
+		clocks = <&clk_s_c0_flexgen CLK_ST231_GP_0>;
+		clock-frequency = <600000000>;
+		st,syscfg = <&syscfg_core 0x22c>;
+		#mbox-cells = <1>;
+		mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
+		mboxes = <&mailbox0 0 2>, <&mailbox2 0 1>, <&mailbox0 0 3>, <&mailbox2 0 0>;
+	};
+
+	st231_delta: st231-delta {
+		compatible = "st,st231-rproc";
+		memory-region = <&delta_reserved>;
+		resets = <&softreset STIH407_ST231_DMU_SOFTRESET>;
+		reset-names = "sw_reset";
+		clocks = <&clk_s_c0_flexgen CLK_ST231_DMU>;
+		clock-frequency = <600000000>;
+		st,syscfg = <&syscfg_core 0x224>;
+		#mbox-cells = <1>;
+		mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
+		mboxes = <&mailbox0 0 0>, <&mailbox3 0 1>, <&mailbox0 0 1>, <&mailbox3 0 0>;
+	};
+
+	delta0 {
+		compatible = "st,st-delta";
+		clock-names = "delta",
+			      "delta-st231",
+			      "delta-flash-promip";
+		clocks = <&clk_s_c0_flexgen CLK_VID_DMU>,
+			 <&clk_s_c0_flexgen CLK_ST231_DMU>,
+			 <&clk_s_c0_flexgen CLK_FLASH_PROMIP>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&intc>;
+		ranges;
+		compatible = "simple-bus";
 
 		syscfg_sbc: sbc-syscfg@9620000 {
 			compatible = "st,stih407-sbc-syscfg", "syscon";
@@ -189,16 +292,6 @@
 			reg = <0x94b5100 0x1000>;
 		};
 
-		irq-syscfg@0 {
-			compatible    = "st,stih407-irq-syscfg";
-			reg = <0 0>;
-			st,syscfg     = <&syscfg_core>;
-			st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
-					<ST_IRQ_SYSCFG_PMU_1>;
-			st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
-					<ST_IRQ_SYSCFG_DISABLED>;
-		};
-
 		/* Display */
 		vtg_main: sti-vtg-main@8d02800 {
 			compatible = "st,vtg";
@@ -389,70 +482,6 @@
 			status = "disabled";
 		};
 
-		usb2_picophy0: phy1@0 {
-			compatible = "st,stih407-usb2-phy";
-			reg = <0 0>;
-			#phy-cells = <0>;
-			st,syscfg = <&syscfg_core 0x100 0xf4>;
-			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
-				 <&picophyreset STIH407_PICOPHY2_RESET>;
-			reset-names = "global", "port";
-		};
-
-		miphy28lp_phy: miphy28lp@0 {
-			compatible = "st,miphy28lp-phy";
-			st,syscfg = <&syscfg_core>;
-			#address-cells	= <1>;
-			#size-cells	= <1>;
-			ranges;
-			reg = <0 0>;
-
-			phy_port0: port@9b22000 {
-				reg = <0x9b22000 0xff>,
-				      <0x9b09000 0xff>,
-				      <0x9b04000 0xff>;
-				reg-names = "sata-up",
-					    "pcie-up",
-					    "pipew";
-
-				st,syscfg = <0x114 0x818 0xe0 0xec>;
-				#phy-cells = <1>;
-
-				reset-names = "miphy-sw-rst";
-				resets = <&softreset STIH407_MIPHY0_SOFTRESET>;
-			};
-
-			phy_port1: port@9b2a000 {
-				reg = <0x9b2a000 0xff>,
-				      <0x9b19000 0xff>,
-				      <0x9b14000 0xff>;
-				reg-names = "sata-up",
-					    "pcie-up",
-					    "pipew";
-
-				st,syscfg = <0x118 0x81c 0xe4 0xf0>;
-
-				#phy-cells = <1>;
-
-				reset-names = "miphy-sw-rst";
-				resets = <&softreset STIH407_MIPHY1_SOFTRESET>;
-			};
-
-			phy_port2: port@8f95000 {
-				reg = <0x8f95000 0xff>,
-				      <0x8f90000 0xff>;
-				reg-names = "pipew",
-					    "usb3-up";
-
-				st,syscfg = <0x11c 0x820>;
-
-				#phy-cells = <1>;
-
-				reset-names = "miphy-sw-rst";
-				resets = <&softreset STIH407_MIPHY2_SOFTRESET>;
-			};
-		};
-
 		spi@9840000 {
 			compatible = "st,comms-ssc4-spi";
 			reg = <0x9840000 0x110>;
@@ -681,78 +710,78 @@
 
 
 		st_dwc3: dwc3@8f94000 {
-			compatible	= "st,stih407-dwc3";
-			reg		= <0x08f94000 0x1000>, <0x110 0x4>;
-			reg-names	= "reg-glue", "syscfg-reg";
-			st,syscfg	= <&syscfg_core>;
-			resets		= <&powerdown STIH407_USB3_POWERDOWN>,
-					  <&softreset STIH407_MIPHY2_SOFTRESET>;
-			reset-names	= "powerdown", "softreset";
-			#address-cells	= <1>;
-			#size-cells	= <1>;
-			pinctrl-names	= "default";
-			pinctrl-0	= <&pinctrl_usb3>;
+			compatible = "st,stih407-dwc3";
+			reg = <0x08f94000 0x1000>, <0x110 0x4>;
+			reg-names = "reg-glue", "syscfg-reg";
+			st,syscfg = <&syscfg_core>;
+			resets = <&powerdown STIH407_USB3_POWERDOWN>,
+				 <&softreset STIH407_MIPHY2_SOFTRESET>;
+			reset-names = "powerdown", "softreset";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb3>;
 			ranges;
 
 			status = "disabled";
 
-			dwc3: dwc3@9900000 {
-				compatible	= "snps,dwc3";
-				reg		= <0x09900000 0x100000>;
-				interrupts	= <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
-				dr_mode		= "host";
-				phy-names	= "usb2-phy", "usb3-phy";
-				phys		= <&usb2_picophy0>,
-						  <&phy_port2 PHY_TYPE_USB3>;
+			dwc3: usb@9900000 {
+				compatible = "snps,dwc3";
+				reg = <0x09900000 0x100000>;
+				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				phy-names = "usb2-phy", "usb3-phy";
+				phys = <&usb2_picophy0>,
+				       <&phy_port2 PHY_TYPE_USB3>;
 				snps,dis_u3_susphy_quirk;
 			};
 		};
 
 		/* COMMS PWM Module */
 		pwm0: pwm@9810000 {
-			compatible	= "st,sti-pwm";
-			#pwm-cells	= <2>;
-			reg		= <0x9810000 0x68>;
-			interrupts      = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
-			pinctrl-names	= "default";
-			pinctrl-0	= <&pinctrl_pwm0_chan0_default>;
-			clock-names	= "pwm";
-			clocks		= <&clk_sysin>;
+			compatible = "st,sti-pwm";
+			#pwm-cells = <2>;
+			reg = <0x9810000 0x68>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_pwm0_chan0_default>;
+			clock-names = "pwm";
+			clocks = <&clk_sysin>;
 			st,pwm-num-chan = <1>;
 
-			status		= "disabled";
+			status = "disabled";
 		};
 
 		/* SBC PWM Module */
 		pwm1: pwm@9510000 {
-			compatible	= "st,sti-pwm";
-			#pwm-cells	= <2>;
-			reg		= <0x9510000 0x68>;
-			interrupts      = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
-			pinctrl-names	= "default";
-			pinctrl-0	= <&pinctrl_pwm1_chan0_default
-					&pinctrl_pwm1_chan1_default
-					&pinctrl_pwm1_chan2_default
-					&pinctrl_pwm1_chan3_default>;
-			clock-names	= "pwm";
-			clocks		= <&clk_sysin>;
+			compatible = "st,sti-pwm";
+			#pwm-cells = <2>;
+			reg = <0x9510000 0x68>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_pwm1_chan0_default
+				     &pinctrl_pwm1_chan1_default
+				     &pinctrl_pwm1_chan2_default
+				     &pinctrl_pwm1_chan3_default>;
+			clock-names = "pwm";
+			clocks = <&clk_sysin>;
 			st,pwm-num-chan = <4>;
 
-			status		= "disabled";
+			status = "disabled";
 		};
 
 		rng10: rng@8a89000 {
-			compatible      = "st,rng";
-			reg		= <0x08a89000 0x1000>;
-			clocks          = <&clk_sysin>;
-			status		= "okay";
+			compatible = "st,rng";
+			reg = <0x08a89000 0x1000>;
+			clocks = <&clk_sysin>;
+			status = "okay";
 		};
 
 		rng11: rng@8a8a000 {
-			compatible      = "st,rng";
-			reg		= <0x08a8a000 0x1000>;
-			clocks          = <&clk_sysin>;
-			status		= "okay";
+			compatible = "st,rng";
+			reg = <0x08a8a000 0x1000>;
+			clocks = <&clk_sysin>;
+			status = "okay";
 		};
 
 		ethernet0: dwmac@9630000 {
@@ -783,64 +812,36 @@
 		};
 
 		mailbox0: mailbox@8f00000  {
-			compatible	= "st,stih407-mailbox";
-			reg		= <0x8f00000 0x1000>;
-			interrupts	= <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-			#mbox-cells	= <2>;
-			mbox-name	= "a9";
-			status		= "okay";
+			compatible = "st,stih407-mailbox";
+			reg = <0x8f00000 0x1000>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+			mbox-name = "a9";
+			status = "okay";
 		};
 
 		mailbox1: mailbox@8f01000 {
-			compatible	= "st,stih407-mailbox";
-			reg		= <0x8f01000 0x1000>;
-			#mbox-cells	= <2>;
-			mbox-name	= "st231_gp_1";
-			status		= "okay";
+			compatible = "st,stih407-mailbox";
+			reg = <0x8f01000 0x1000>;
+			#mbox-cells = <2>;
+			mbox-name = "st231_gp_1";
+			status = "okay";
 		};
 
 		mailbox2: mailbox@8f02000 {
-			compatible	= "st,stih407-mailbox";
-			reg		= <0x8f02000 0x1000>;
-			#mbox-cells	= <2>;
-			mbox-name	= "st231_gp_0";
-			status		= "okay";
+			compatible = "st,stih407-mailbox";
+			reg = <0x8f02000 0x1000>;
+			#mbox-cells = <2>;
+			mbox-name = "st231_gp_0";
+			status = "okay";
 		};
 
 		mailbox3: mailbox@8f03000 {
-			compatible	= "st,stih407-mailbox";
-			reg		= <0x8f03000 0x1000>;
-			#mbox-cells	= <2>;
-			mbox-name	= "st231_audio_video";
-			status		= "okay";
-		};
-
-		st231_gp0: st231-gp0@0 {
-			compatible	= "st,st231-rproc";
-			reg		= <0 0>;
-			memory-region	= <&gp0_reserved>;
-			resets		= <&softreset STIH407_ST231_GP0_SOFTRESET>;
-			reset-names	= "sw_reset";
-			clocks		= <&clk_s_c0_flexgen CLK_ST231_GP_0>;
-			clock-frequency	= <600000000>;
-			st,syscfg	= <&syscfg_core 0x22c>;
-			#mbox-cells = <1>;
-			mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
-			mboxes = <&mailbox0 0 2>, <&mailbox2 0 1>, <&mailbox0 0 3>, <&mailbox2 0 0>;
-		};
-
-		st231_delta: st231-delta@0 {
-			compatible	= "st,st231-rproc";
-			reg		= <0 0>;
-			memory-region	= <&delta_reserved>;
-			resets		= <&softreset STIH407_ST231_DMU_SOFTRESET>;
-			reset-names	= "sw_reset";
-			clocks		= <&clk_s_c0_flexgen CLK_ST231_DMU>;
-			clock-frequency	= <600000000>;
-			st,syscfg	= <&syscfg_core 0x224>;
-			#mbox-cells = <1>;
-			mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
-			mboxes = <&mailbox0 0 0>, <&mailbox3 0 1>, <&mailbox0 0 1>, <&mailbox3 0 0>;
+			compatible = "st,stih407-mailbox";
+			reg = <0x8f03000 0x1000>;
+			#mbox-cells = <2>;
+			mbox-name = "st231_audio_video";
+			status = "okay";
 		};
 
 		/* fdma audio */
@@ -912,7 +913,7 @@
 			dmas = <&fdma0 2 0 1>;
 			dma-names = "tx";
 
-			status		= "disabled";
+			status = "disabled";
 		};
 
 		sti_uni_player1: sti-uni-player@8d81000 {
@@ -986,16 +987,5 @@
 
 			status = "disabled";
 		};
-
-		delta0@0 {
-			compatible = "st,st-delta";
-			reg = <0 0>;
-			clock-names = "delta",
-				      "delta-st231",
-				      "delta-flash-promip";
-			clocks = <&clk_s_c0_flexgen CLK_VID_DMU>,
-				 <&clk_s_c0_flexgen CLK_ST231_DMU>,
-				 <&clk_s_c0_flexgen CLK_FLASH_PROMIP>;
-		};
 	};
 };
diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
index 9e212b0af89d..aca43d2bdaad 100644
--- a/arch/arm/boot/dts/stih407.dtsi
+++ b/arch/arm/boot/dts/stih407.dtsi
@@ -13,7 +13,7 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0 0>;
-			assigned-clocks	= <&clk_s_d2_quadfs 0>,
+			assigned-clocks = <&clk_s_d2_quadfs 0>,
 					  <&clk_s_d2_quadfs 1>,
 					  <&clk_s_c0_pll1 0>,
 					  <&clk_s_c0_flexgen CLK_COMPO_DVP>,
@@ -106,7 +106,7 @@
 				reg-names = "hdmi-reg";
 				#sound-dai-cells = <0>;
 				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names	= "irq";
+				interrupt-names = "irq";
 				clock-names = "pix",
 					      "tmds",
 					      "phy",
diff --git a/arch/arm/boot/dts/stih410-b2120.dts b/arch/arm/boot/dts/stih410-b2120.dts
index 9d3b118f5f0f..538ff98ca1b1 100644
--- a/arch/arm/boot/dts/stih410-b2120.dts
+++ b/arch/arm/boot/dts/stih410-b2120.dts
@@ -24,6 +24,14 @@
 		ethernet0 = &ethernet0;
 	};
 
+	usb2_picophy1: phy2 {
+		status = "okay";
+	};
+
+	usb2_picophy2: phy3 {
+		status = "okay";
+	};
+
 	soc {
 
 		mmc0: sdhci@9060000 {
@@ -33,14 +41,6 @@
 			sd-uhs-ddr50;
 		};
 
-		usb2_picophy1: phy2@0 {
-			status = "okay";
-		};
-
-		usb2_picophy2: phy3@0 {
-			status = "okay";
-		};
-
 		ohci0: usb@9a03c00 {
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts
index 9d579c16c295..26d93f26f6d0 100644
--- a/arch/arm/boot/dts/stih410-b2260.dts
+++ b/arch/arm/boot/dts/stih410-b2260.dts
@@ -75,6 +75,21 @@
 		};
 	};
 
+	miphy28lp_phy: miphy28lp {
+
+		phy_port1: port@9b2a000 {
+			st,osc-force-ext;
+		};
+	};
+
+	usb2_picophy1: phy2 {
+		status = "okay";
+	};
+
+	usb2_picophy2: phy3 {
+		status = "okay";
+	};
+
 	soc {
 		/* Low speed expansion connector */
 		uart0: serial@9830000 {
@@ -145,14 +160,6 @@
 			status = "okay";
 		};
 
-		usb2_picophy1: phy2@0 {
-			status = "okay";
-		};
-
-		usb2_picophy2: phy3@0 {
-			status = "okay";
-		};
-
 		ohci0: usb@9a03c00 {
 			status = "okay";
 		};
@@ -196,13 +203,6 @@
 			status = "okay";
 		};
 
-		miphy28lp_phy: miphy28lp@0 {
-
-			phy_port1: port@9b2a000 {
-				st,osc-force-ext;
-			};
-		};
-
 		sata1: sata@9b28000 {
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/stih410-clock.dtsi b/arch/arm/boot/dts/stih410-clock.dtsi
index 6b0e6d4477a3..abac98a1810b 100644
--- a/arch/arm/boot/dts/stih410-clock.dtsi
+++ b/arch/arm/boot/dts/stih410-clock.dtsi
@@ -32,7 +32,7 @@
 		 */
 		clockgen-a9@92b0000 {
 			compatible = "st,clkgen-c32";
-			reg = <0x92b0000 0xffff>;
+			reg = <0x92b0000 0x10000>;
 
 			clockgen_a9_pll: clockgen-a9-pll {
 				#clock-cells = <1>;
@@ -40,29 +40,29 @@
 
 				clocks = <&clk_sysin>;
 			};
-		};
 
-		/*
-		 * ARM CPU related clocks.
-		 */
-		clk_m_a9: clk-m-a9@92b0000 {
-			#clock-cells = <0>;
-			compatible = "st,stih407-clkgen-a9-mux", "st,clkgen-mux";
-			reg = <0x92b0000 0x10000>;
-
-			clocks = <&clockgen_a9_pll 0>,
-				 <&clockgen_a9_pll 0>,
-				 <&clk_s_c0_flexgen 13>,
-				 <&clk_m_a9_ext2f_div2>;
 			/*
-			 * ARM Peripheral clock for timers
+			 * ARM CPU related clocks.
 			 */
-			arm_periph_clk: clk-m-a9-periphs {
+			clk_m_a9: clk-m-a9 {
 				#clock-cells = <0>;
-				compatible = "fixed-factor-clock";
-				clocks = <&clk_m_a9>;
-				clock-div = <2>;
-				clock-mult = <1>;
+				compatible = "st,stih407-clkgen-a9-mux", "st,clkgen-mux";
+
+				clocks = <&clockgen_a9_pll 0>,
+					 <&clockgen_a9_pll 0>,
+					 <&clk_s_c0_flexgen 13>,
+					 <&clk_m_a9_ext2f_div2>;
+
+				/*
+				 * ARM Peripheral clock for timers
+				 */
+				arm_periph_clk: clk-m-a9-periphs {
+					#clock-cells = <0>;
+					compatible = "fixed-factor-clock";
+					clocks = <&clk_m_a9>;
+					clock-div = <2>;
+					clock-mult = <1>;
+				};
 			};
 		};
 
@@ -87,14 +87,6 @@
 			};
 		};
 
-		clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
-			#clock-cells = <1>;
-			compatible = "st,quadfs-pll";
-			reg = <0x9103000 0x1000>;
-
-			clocks = <&clk_sysin>;
-		};
-
 		clk_s_c0: clockgen-c@9103000 {
 			compatible = "st,clkgen-c32";
 			reg = <0x9103000 0x1000>;
@@ -113,6 +105,13 @@
 				clocks = <&clk_sysin>;
 			};
 
+			clk_s_c0_quadfs: clk-s-c0-quadfs {
+				#clock-cells = <1>;
+				compatible = "st,quadfs-pll";
+
+				clocks = <&clk_sysin>;
+			};
+
 			clk_s_c0_flexgen: clk-s-c0-flexgen {
 				#clock-cells = <1>;
 				compatible = "st,flexgen", "st,flexgen-stih410-c0";
@@ -142,18 +141,17 @@
 			};
 		};
 
-		clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
-			#clock-cells = <1>;
-			compatible = "st,quadfs-d0";
-			reg = <0x9104000 0x1000>;
-
-			clocks = <&clk_sysin>;
-		};
-
 		clockgen-d0@9104000 {
 			compatible = "st,clkgen-c32";
 			reg = <0x9104000 0x1000>;
 
+			clk_s_d0_quadfs: clk-s-d0-quadfs {
+				#clock-cells = <1>;
+				compatible = "st,quadfs-d0";
+
+				clocks = <&clk_sysin>;
+			};
+
 			clk_s_d0_flexgen: clk-s-d0-flexgen {
 				#clock-cells = <1>;
 				compatible = "st,flexgen", "st,flexgen-stih410-d0";
@@ -166,18 +164,17 @@
 			};
 		};
 
-		clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
-			#clock-cells = <1>;
-			compatible = "st,quadfs-d2";
-			reg = <0x9106000 0x1000>;
-
-			clocks = <&clk_sysin>;
-		};
-
 		clockgen-d2@9106000 {
 			compatible = "st,clkgen-c32";
 			reg = <0x9106000 0x1000>;
 
+			clk_s_d2_quadfs: clk-s-d2-quadfs {
+				#clock-cells = <1>;
+				compatible = "st,quadfs-d2";
+
+				clocks = <&clk_sysin>;
+			};
+
 			clk_s_d2_flexgen: clk-s-d2-flexgen {
 				#clock-cells = <1>;
 				compatible = "st,flexgen", "st,flexgen-stih407-d2";
@@ -192,18 +189,17 @@
 			};
 		};
 
-		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
-			#clock-cells = <1>;
-			compatible = "st,quadfs-d3";
-			reg = <0x9107000 0x1000>;
-
-			clocks = <&clk_sysin>;
-		};
-
 		clockgen-d3@9107000 {
 			compatible = "st,clkgen-c32";
 			reg = <0x9107000 0x1000>;
 
+			clk_s_d3_quadfs: clk-s-d3-quadfs {
+				#clock-cells = <1>;
+				compatible = "st,quadfs-d3";
+
+				clocks = <&clk_sysin>;
+			};
+
 			clk_s_d3_flexgen: clk-s-d3-flexgen {
 				#clock-cells = <1>;
 				compatible = "st,flexgen", "st,flexgen-stih407-d3";
diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index 6d847019c554..a39dd5f7bcae 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -12,31 +12,29 @@
 		bdisp0 = &bdisp0;
 	};
 
-	soc {
-		usb2_picophy1: phy2@0 {
-			compatible = "st,stih407-usb2-phy";
-			reg = <0 0>;
-			#phy-cells = <0>;
-			st,syscfg = <&syscfg_core 0xf8 0xf4>;
-			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
-				 <&picophyreset STIH407_PICOPHY0_RESET>;
-			reset-names = "global", "port";
-
-			status = "disabled";
-		};
+	usb2_picophy1: phy2 {
+		compatible = "st,stih407-usb2-phy";
+		#phy-cells = <0>;
+		st,syscfg = <&syscfg_core 0xf8 0xf4>;
+		resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+			 <&picophyreset STIH407_PICOPHY0_RESET>;
+		reset-names = "global", "port";
+
+		status = "disabled";
+	};
 
-		usb2_picophy2: phy3@0 {
-			compatible = "st,stih407-usb2-phy";
-			reg = <0 0>;
-			#phy-cells = <0>;
-			st,syscfg = <&syscfg_core 0xfc 0xf4>;
-			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
-				 <&picophyreset STIH407_PICOPHY1_RESET>;
-			reset-names = "global", "port";
+	usb2_picophy2: phy3 {
+		compatible = "st,stih407-usb2-phy";
+		#phy-cells = <0>;
+		st,syscfg = <&syscfg_core 0xfc 0xf4>;
+		resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+			 <&picophyreset STIH407_PICOPHY1_RESET>;
+		reset-names = "global", "port";
 
-			status = "disabled";
-		};
+		status = "disabled";
+	};
 
+	soc {
 		ohci0: usb@9a03c00 {
 			compatible = "st,st-ohci-300x";
 			reg = <0x9a03c00 0x100>;
@@ -107,7 +105,7 @@
 			#size-cells = <1>;
 
 			reg = <0 0>;
-			assigned-clocks	= <&clk_s_d2_quadfs 0>,
+			assigned-clocks = <&clk_s_d2_quadfs 0>,
 					  <&clk_s_d2_quadfs 1>,
 					  <&clk_s_c0_pll1 0>,
 					  <&clk_s_c0_flexgen CLK_COMPO_DVP>,
@@ -200,7 +198,7 @@
 				reg-names = "hdmi-reg";
 				#sound-dai-cells = <0>;
 				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names	= "irq";
+				interrupt-names = "irq";
 				clock-names = "pix",
 					      "tmds",
 					      "phy",
@@ -274,16 +272,6 @@
 			interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
 		};
 
-		delta0@0 {
-			compatible = "st,st-delta";
-			clock-names = "delta",
-				      "delta-st231",
-				      "delta-flash-promip";
-			clocks = <&clk_s_c0_flexgen CLK_VID_DMU>,
-				 <&clk_s_c0_flexgen CLK_ST231_DMU>,
-				 <&clk_s_c0_flexgen CLK_FLASH_PROMIP>;
-		};
-
 		sti-cec@94a087c {
 			compatible = "st,stih-cec";
 			reg = <0x94a087c 0x64>;
diff --git a/arch/arm/boot/dts/stih418-b2199.dts b/arch/arm/boot/dts/stih418-b2199.dts
index b66e2b29edea..d21bcc7c1271 100644
--- a/arch/arm/boot/dts/stih418-b2199.dts
+++ b/arch/arm/boot/dts/stih418-b2199.dts
@@ -37,6 +37,17 @@
 		};
 	};
 
+	miphy28lp_phy: miphy28lp {
+
+		phy_port0: port@9b22000 {
+			st,osc-rdy;
+		};
+
+		phy_port1: port@9b2a000 {
+			st,osc-force-ext;
+		};
+	};
+
 	soc {
 		sbc_serial0: serial@9530000 {
 			status = "okay";
@@ -84,17 +95,6 @@
 			non-removable;
 		};
 
-		miphy28lp_phy: miphy28lp@0 {
-
-			phy_port0: port@9b22000 {
-				st,osc-rdy;
-			};
-
-			phy_port1: port@9b2a000 {
-				st,osc-force-ext;
-			};
-		};
-
 		st_dwc3: dwc3@8f94000 {
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/stih418-clock.dtsi b/arch/arm/boot/dts/stih418-clock.dtsi
index e84c476b83ed..e1749e92a2e7 100644
--- a/arch/arm/boot/dts/stih418-clock.dtsi
+++ b/arch/arm/boot/dts/stih418-clock.dtsi
@@ -32,7 +32,7 @@
 		 */
 		clockgen-a9@92b0000 {
 			compatible = "st,clkgen-c32";
-			reg = <0x92b0000 0xffff>;
+			reg = <0x92b0000 0x10000>;
 
 			clockgen_a9_pll: clockgen-a9-pll {
 				#clock-cells = <1>;
@@ -40,30 +40,29 @@
 
 				clocks = <&clk_sysin>;
 			};
-		};
-
-		/*
-		 * ARM CPU related clocks.
-		 */
-		clk_m_a9: clk-m-a9@92b0000 {
-			#clock-cells = <0>;
-			compatible = "st,stih407-clkgen-a9-mux", "st,clkgen-mux";
-			reg = <0x92b0000 0x10000>;
-
-			clocks = <&clockgen_a9_pll 0>,
-				 <&clockgen_a9_pll 0>,
-				 <&clk_s_c0_flexgen 13>,
-				 <&clk_m_a9_ext2f_div2>;
 
 			/*
-			 * ARM Peripheral clock for timers
+			 * ARM CPU related clocks.
 			 */
-			arm_periph_clk: clk-m-a9-periphs {
+			clk_m_a9: clk-m-a9 {
 				#clock-cells = <0>;
-				compatible = "fixed-factor-clock";
-				clocks = <&clk_m_a9>;
-				clock-div = <2>;
-				clock-mult = <1>;
+				compatible = "st,stih407-clkgen-a9-mux", "st,clkgen-mux";
+
+				clocks = <&clockgen_a9_pll 0>,
+					 <&clockgen_a9_pll 0>,
+					 <&clk_s_c0_flexgen 13>,
+					 <&clk_m_a9_ext2f_div2>;
+
+				/*
+				 * ARM Peripheral clock for timers
+				 */
+				arm_periph_clk: clk-m-a9-periphs {
+					#clock-cells = <0>;
+					compatible = "fixed-factor-clock";
+					clocks = <&clk_m_a9>;
+					clock-div = <2>;
+					clock-mult = <1>;
+				};
 			};
 		};
 
@@ -88,14 +87,6 @@
 			};
 		};
 
-		clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
-			#clock-cells = <1>;
-			compatible = "st,quadfs-pll";
-			reg = <0x9103000 0x1000>;
-
-			clocks = <&clk_sysin>;
-		};
-
 		clk_s_c0: clockgen-c@9103000 {
 			compatible = "st,clkgen-c32";
 			reg = <0x9103000 0x1000>;
@@ -114,6 +105,13 @@
 				clocks = <&clk_sysin>;
 			};
 
+			clk_s_c0_quadfs: clk-s-c0-quadfs {
+				#clock-cells = <1>;
+				compatible = "st,quadfs-pll";
+
+				clocks = <&clk_sysin>;
+			};
+
 			clk_s_c0_flexgen: clk-s-c0-flexgen {
 				#clock-cells = <1>;
 				compatible = "st,flexgen", "st,flexgen-stih418-c0";
@@ -143,18 +141,17 @@
 			};
 		};
 
-		clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
-			#clock-cells = <1>;
-			compatible = "st,quadfs-d0";
-			reg = <0x9104000 0x1000>;
-
-			clocks = <&clk_sysin>;
-		};
-
 		clockgen-d0@9104000 {
 			compatible = "st,clkgen-c32";
 			reg = <0x9104000 0x1000>;
 
+			clk_s_d0_quadfs: clk-s-d0-quadfs {
+				#clock-cells = <1>;
+				compatible = "st,quadfs-d0";
+
+				clocks = <&clk_sysin>;
+			};
+
 			clk_s_d0_flexgen: clk-s-d0-flexgen {
 				#clock-cells = <1>;
 				compatible = "st,flexgen", "st,flexgen-stih410-d0";
@@ -167,18 +164,17 @@
 			};
 		};
 
-		clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
-			#clock-cells = <1>;
-			compatible = "st,quadfs-d2";
-			reg = <0x9106000 0x1000>;
-
-			clocks = <&clk_sysin>;
-		};
-
 		clockgen-d2@9106000 {
 			compatible = "st,clkgen-c32";
 			reg = <0x9106000 0x1000>;
 
+			clk_s_d2_quadfs: clk-s-d2-quadfs {
+				#clock-cells = <1>;
+				compatible = "st,quadfs-d2";
+
+				clocks = <&clk_sysin>;
+			};
+
 			clk_s_d2_flexgen: clk-s-d2-flexgen {
 				#clock-cells = <1>;
 				compatible = "st,flexgen", "st,flexgen-stih418-d2";
@@ -193,18 +189,17 @@
 			};
 		};
 
-		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
-			#clock-cells = <1>;
-			compatible = "st,quadfs-d3";
-			reg = <0x9107000 0x1000>;
-
-			clocks = <&clk_sysin>;
-		};
-
 		clockgen-d3@9107000 {
 			compatible = "st,clkgen-c32";
 			reg = <0x9107000 0x1000>;
 
+			clk_s_d3_quadfs: clk-s-d3-quadfs {
+				#clock-cells = <1>;
+				compatible = "st,quadfs-d3";
+
+				clocks = <&clk_sysin>;
+			};
+
 			clk_s_d3_flexgen: clk-s-d3-flexgen {
 				#clock-cells = <1>;
 				compatible = "st,flexgen", "st,flexgen-stih407-d3";
diff --git a/arch/arm/boot/dts/stih418.dtsi b/arch/arm/boot/dts/stih418.dtsi
index 97eda4392fbe..b35b9b7a7ccc 100644
--- a/arch/arm/boot/dts/stih418.dtsi
+++ b/arch/arm/boot/dts/stih418.dtsi
@@ -26,31 +26,29 @@
 		};
 	};
 
+	usb2_picophy1: phy2 {
+		compatible = "st,stih407-usb2-phy";
+		#phy-cells = <0>;
+		st,syscfg = <&syscfg_core 0xf8 0xf4>;
+		resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+			 <&picophyreset STIH407_PICOPHY0_RESET>;
+		reset-names = "global", "port";
+	};
+
+	usb2_picophy2: phy3 {
+		compatible = "st,stih407-usb2-phy";
+		#phy-cells = <0>;
+		st,syscfg = <&syscfg_core 0xfc 0xf4>;
+		resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+			 <&picophyreset STIH407_PICOPHY1_RESET>;
+		reset-names = "global", "port";
+	};
+
 	soc {
 		rng11: rng@8a8a000 {
 			status = "disabled";
 		};
 
-		usb2_picophy1: phy2@0 {
-			compatible = "st,stih407-usb2-phy";
-			reg = <0 0>;
-			#phy-cells = <0>;
-			st,syscfg = <&syscfg_core 0xf8 0xf4>;
-			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
-				 <&picophyreset STIH407_PICOPHY0_RESET>;
-			reset-names = "global", "port";
-		};
-
-		usb2_picophy2: phy3@0 {
-			compatible = "st,stih407-usb2-phy";
-			reg = <0 0>;
-			#phy-cells = <0>;
-			st,syscfg = <&syscfg_core 0xfc 0xf4>;
-			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
-				 <&picophyreset STIH407_PICOPHY1_RESET>;
-			reset-names = "global", "port";
-		};
-
 		ohci0: usb@9a03c00 {
 			compatible = "st,st-ohci-300x";
 			reg = <0x9a03c00 0x100>;
diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
index d051f080e52e..2aa94605d3d4 100644
--- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -71,6 +71,17 @@
 		};
 	};
 
+	miphy28lp_phy: miphy28lp {
+
+		phy_port0: port@9b22000 {
+			st,osc-rdy;
+		};
+
+		phy_port1: port@9b2a000 {
+			st,osc-force-ext;
+		};
+	};
+
 	soc {
 		sbc_serial0: serial@9530000 {
 			status = "okay";
@@ -128,17 +139,6 @@
 			st,i2c-min-sda-pulse-width-us = <5>;
 		};
 
-		miphy28lp_phy: miphy28lp@0 {
-
-			phy_port0: port@9b22000 {
-				st,osc-rdy;
-			};
-
-			phy_port1: port@9b2a000 {
-				st,osc-force-ext;
-			};
-		};
-
 		st_dwc3: dwc3@8f94000 {
 			status = "okay";
 		};
@@ -175,11 +175,11 @@
 
 			/* tsin0 is TSA on NIMA */
 			tsin0: port {
-				tsin-num	= <0>;
+				tsin-num = <0>;
 				serial-not-parallel;
-				i2c-bus		= <&ssc2>;
-				reset-gpios	= <&pio15 4 GPIO_ACTIVE_HIGH>;
-				dvb-card	= <STV0367_TDA18212_NIMA_1>;
+				i2c-bus = <&ssc2>;
+				reset-gpios = <&pio15 4 GPIO_ACTIVE_HIGH>;
+				dvb-card = <STV0367_TDA18212_NIMA_1>;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index cb46326a8c75..3de0e9dbe030 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -251,10 +251,10 @@
 
 &mac {
 	status = "okay";
-	pinctrl-0	= <&ethernet_mii>;
-	pinctrl-names	= "default";
-	phy-mode	= "mii";
-	phy-handle	= <&phy1>;
+	pinctrl-0 = <&ethernet_mii>;
+	pinctrl-names = "default";
+	phy-mode = "mii";
+	phy-handle = <&phy1>;
 	mdio0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -308,6 +308,18 @@
 	};
 };
 
+&timers5 {
+	/* Override timer5 to act as clockevent */
+	compatible = "st,stm32-timer";
+	interrupts = <50>;
+	status = "okay";
+	/delete-property/#address-cells;
+	/delete-property/#size-cells;
+	/delete-property/clock-names;
+	/delete-node/pwm;
+	/delete-node/timer@4;
+};
+
 &usart1 {
 	pinctrl-0 = <&usart1_pins_a>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/stm32746g-eval.dts b/arch/arm/boot/dts/stm32746g-eval.dts
index 327613fd9666..a293e65141c6 100644
--- a/arch/arm/boot/dts/stm32746g-eval.dts
+++ b/arch/arm/boot/dts/stm32746g-eval.dts
@@ -194,6 +194,18 @@
 	bus-width = <4>;
 };
 
+&timers5 {
+	/* Override timer5 to act as clockevent */
+	compatible = "st,stm32-timer";
+	interrupts = <50>;
+	status = "okay";
+	/delete-property/#address-cells;
+	/delete-property/#size-cells;
+	/delete-property/clock-names;
+	/delete-node/pwm;
+	/delete-node/timer@4;
+};
+
 &usart1 {
 	pinctrl-0 = <&usart1_pins_a>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
index 155d9ffacc83..500bcc302d42 100644
--- a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
@@ -45,7 +45,7 @@
 
 / {
 	soc {
-		pinctrl: pin-controller@40020000 {
+		pinctrl: pinctrl@40020000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x40020000 0x3000>;
diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts
index 6435e099c632..3b81228d46a2 100644
--- a/arch/arm/boot/dts/stm32f429-disco.dts
+++ b/arch/arm/boot/dts/stm32f429-disco.dts
@@ -205,6 +205,18 @@
 	};
 };
 
+&timers5 {
+	/* Override timer5 to act as clockevent */
+	compatible = "st,stm32-timer";
+	interrupts = <50>;
+	status = "okay";
+	/delete-property/#address-cells;
+	/delete-property/#size-cells;
+	/delete-property/clock-names;
+	/delete-node/pwm;
+	/delete-node/timer@4;
+};
+
 &usart1 {
 	pinctrl-0 = <&usart1_pins_a>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index 8748d5850298..c31ceb821231 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -93,14 +93,6 @@
 			};
 		};
 
-		timer2: timer@40000000 {
-			compatible = "st,stm32-timer";
-			reg = <0x40000000 0x400>;
-			interrupts = <28>;
-			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM2)>;
-			status = "disabled";
-		};
-
 		timers2: timers@40000000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -123,14 +115,6 @@
 			};
 		};
 
-		timer3: timer@40000400 {
-			compatible = "st,stm32-timer";
-			reg = <0x40000400 0x400>;
-			interrupts = <29>;
-			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM3)>;
-			status = "disabled";
-		};
-
 		timers3: timers@40000400 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -153,14 +137,6 @@
 			};
 		};
 
-		timer4: timer@40000800 {
-			compatible = "st,stm32-timer";
-			reg = <0x40000800 0x400>;
-			interrupts = <30>;
-			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM4)>;
-			status = "disabled";
-		};
-
 		timers4: timers@40000800 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -183,13 +159,6 @@
 			};
 		};
 
-		timer5: timer@40000c00 {
-			compatible = "st,stm32-timer";
-			reg = <0x40000c00 0x400>;
-			interrupts = <50>;
-			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM5)>;
-		};
-
 		timers5: timers@40000c00 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -212,14 +181,6 @@
 			};
 		};
 
-		timer6: timer@40001000 {
-			compatible = "st,stm32-timer";
-			reg = <0x40001000 0x400>;
-			interrupts = <54>;
-			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM6)>;
-			status = "disabled";
-		};
-
 		timers6: timers@40001000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -236,14 +197,6 @@
 			};
 		};
 
-		timer7: timer@40001400 {
-			compatible = "st,stm32-timer";
-			reg = <0x40001400 0x400>;
-			interrupts = <55>;
-			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM7)>;
-			status = "disabled";
-		};
-
 		timers7: timers@40001400 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -759,6 +712,16 @@
 			status = "disabled";
 		};
 
+		dma2d: dma2d@4002b000 {
+			compatible = "st,stm32-dma2d";
+			reg = <0x4002b000 0xc00>;
+			interrupts = <90>;
+			resets = <&rcc STM32F4_AHB1_RESET(DMA2D)>;
+			clocks = <&rcc 0 STM32F4_AHB1_CLOCK(DMA2D)>;
+			clock-names = "dma2d";
+			status = "disabled";
+		};
+
 		usbotg_hs: usb@40040000 {
 			compatible = "snps,dwc2";
 			reg = <0x40040000 0x40000>;
diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
index 30905ce672a0..5a0daf8e8b11 100644
--- a/arch/arm/boot/dts/stm32f469-disco.dts
+++ b/arch/arm/boot/dts/stm32f469-disco.dts
@@ -132,6 +132,10 @@
 	clock-frequency = <8000000>;
 };
 
+&dma2d {
+	status = "okay";
+};
+
 &dsi {
 	#address-cells = <1>;
 	#size-cells = <0>;
@@ -224,6 +228,18 @@
 	bus-width = <4>;
 };
 
+&timers5 {
+	/* Override timer5 to act as clockevent */
+	compatible = "st,stm32-timer";
+	interrupts = <50>;
+	status = "okay";
+	/delete-property/#address-cells;
+	/delete-property/#size-cells;
+	/delete-property/clock-names;
+	/delete-node/pwm;
+	/delete-node/timer@4;
+};
+
 &usart3 {
 	pinctrl-0 = <&usart3_pins_a>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
index 1cf8a23c2644..8f37aefa7315 100644
--- a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
@@ -9,7 +9,7 @@
 
 / {
 	soc {
-		pinctrl: pin-controller@40020000 {
+		pinctrl: pinctrl@40020000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x40020000 0x3000>;
diff --git a/arch/arm/boot/dts/stm32f746-disco.dts b/arch/arm/boot/dts/stm32f746-disco.dts
index 569d23cc61e5..c11616ed5fc6 100644
--- a/arch/arm/boot/dts/stm32f746-disco.dts
+++ b/arch/arm/boot/dts/stm32f746-disco.dts
@@ -109,6 +109,18 @@
 	bus-width = <4>;
 };
 
+&timers5 {
+	/* Override timer5 to act as clockevent */
+	compatible = "st,stm32-timer";
+	interrupts = <50>;
+	status = "okay";
+	/delete-property/#address-cells;
+	/delete-property/#size-cells;
+	/delete-property/clock-names;
+	/delete-node/pwm;
+	/delete-node/timer@4;
+};
+
 &usart1 {
 	pinctrl-0 = <&usart1_pins_b>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index 014b416f57e6..dc868e6da40e 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -75,14 +75,6 @@
 	};
 
 	soc {
-		timer2: timer@40000000 {
-			compatible = "st,stm32-timer";
-			reg = <0x40000000 0x400>;
-			interrupts = <28>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM2)>;
-			status = "disabled";
-		};
-
 		timers2: timers@40000000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -105,14 +97,6 @@
 			};
 		};
 
-		timer3: timer@40000400 {
-			compatible = "st,stm32-timer";
-			reg = <0x40000400 0x400>;
-			interrupts = <29>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM3)>;
-			status = "disabled";
-		};
-
 		timers3: timers@40000400 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -135,14 +119,6 @@
 			};
 		};
 
-		timer4: timer@40000800 {
-			compatible = "st,stm32-timer";
-			reg = <0x40000800 0x400>;
-			interrupts = <30>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM4)>;
-			status = "disabled";
-		};
-
 		timers4: timers@40000800 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -165,13 +141,6 @@
 			};
 		};
 
-		timer5: timer@40000c00 {
-			compatible = "st,stm32-timer";
-			reg = <0x40000c00 0x400>;
-			interrupts = <50>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM5)>;
-		};
-
 		timers5: timers@40000c00 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -194,14 +163,6 @@
 			};
 		};
 
-		timer6: timer@40001000 {
-			compatible = "st,stm32-timer";
-			reg = <0x40001000 0x400>;
-			interrupts = <54>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM6)>;
-			status = "disabled";
-		};
-
 		timers6: timers@40001000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -218,14 +179,6 @@
 			};
 		};
 
-		timer7: timer@40001400 {
-			compatible = "st,stm32-timer";
-			reg = <0x40001400 0x400>;
-			interrupts = <55>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM7)>;
-			status = "disabled";
-		};
-
 		timers7: timers@40001400 {
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm/boot/dts/stm32f769-disco.dts b/arch/arm/boot/dts/stm32f769-disco.dts
index be943b701980..b038d0ed39e8 100644
--- a/arch/arm/boot/dts/stm32f769-disco.dts
+++ b/arch/arm/boot/dts/stm32f769-disco.dts
@@ -137,6 +137,18 @@
 	bus-width = <4>;
 };
 
+&timers5 {
+	/* Override timer5 to act as clockevent */
+	compatible = "st,stm32-timer";
+	interrupts = <50>;
+	status = "okay";
+	/delete-property/#address-cells;
+	/delete-property/#size-cells;
+	/delete-property/clock-names;
+	/delete-node/pwm;
+	/delete-node/timer@4;
+};
+
 &usart1 {
 	pinctrl-0 = <&usart1_pins_a>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi
index 6e42ca2dada2..2059593da21d 100644
--- a/arch/arm/boot/dts/stm32h743.dtsi
+++ b/arch/arm/boot/dts/stm32h743.dtsi
@@ -375,7 +375,7 @@
 			arm,primecell-periphid = <0x10153180>;
 			reg = <0x52007000 0x1000>;
 			interrupts = <49>;
-			interrupt-names	= "cmd_irq";
+			interrupt-names = "cmd_irq";
 			clocks = <&rcc SDMMC1_CK>;
 			clock-names = "apb_pclk";
 			resets = <&rcc STM32H7_AHB3_RESET(SDMMC1)>;
@@ -389,7 +389,7 @@
 			arm,primecell-periphid = <0x10153180>;
 			reg = <0x48022400 0x400>;
 			interrupts = <124>;
-			interrupt-names	= "cmd_irq";
+			interrupt-names = "cmd_irq";
 			clocks = <&rcc SDMMC2_CK>;
 			clock-names = "apb_pclk";
 			resets = <&rcc STM32H7_AHB2_RESET(SDMMC2)>;
@@ -583,7 +583,7 @@
 			status = "disabled";
 		};
 
-		pinctrl: pin-controller@58020000 {
+		pinctrl: pinctrl@58020000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "st,stm32h743-pinctrl";
diff --git a/arch/arm/boot/dts/stm32h743i-disco.dts b/arch/arm/boot/dts/stm32h743i-disco.dts
index 59e01ce10318..2b452883a708 100644
--- a/arch/arm/boot/dts/stm32h743i-disco.dts
+++ b/arch/arm/boot/dts/stm32h743i-disco.dts
@@ -77,10 +77,10 @@
 
 &mac {
 	status = "disabled";
-	pinctrl-0	= <&ethernet_rmii>;
-	pinctrl-names	= "default";
-	phy-mode	= "rmii";
-	phy-handle	= <&phy0>;
+	pinctrl-0 = <&ethernet_rmii>;
+	pinctrl-names = "default";
+	phy-mode = "rmii";
+	phy-handle = <&phy0>;
 
 	mdio0 {
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/stm32h743i-eval.dts b/arch/arm/boot/dts/stm32h743i-eval.dts
index 38cc7faf6884..5c5d8059bdc7 100644
--- a/arch/arm/boot/dts/stm32h743i-eval.dts
+++ b/arch/arm/boot/dts/stm32h743i-eval.dts
@@ -115,10 +115,10 @@
 
 &mac {
 	status = "disabled";
-	pinctrl-0	= <&ethernet_rmii>;
-	pinctrl-names	= "default";
-	phy-mode	= "rmii";
-	phy-handle	= <&phy0>;
+	pinctrl-0 = <&ethernet_rmii>;
+	pinctrl-names = "default";
+	phy-mode = "rmii";
+	phy-handle = <&phy0>;
 
 	mdio0 {
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/stm32h750i-art-pi.dts b/arch/arm/boot/dts/stm32h750i-art-pi.dts
index 9bb73bb61901..f3e70d3b65ac 100644
--- a/arch/arm/boot/dts/stm32h750i-art-pi.dts
+++ b/arch/arm/boot/dts/stm32h750i-art-pi.dts
@@ -126,10 +126,10 @@
 
 &mac {
 	status = "disabled";
-	pinctrl-0	= <&ethernet_rmii>;
-	pinctrl-names	= "default";
-	phy-mode	= "rmii";
-	phy-handle	= <&phy0>;
+	pinctrl-0 = <&ethernet_rmii>;
+	pinctrl-names = "default";
+	phy-mode = "rmii";
+	phy-handle = <&phy0>;
 
 	mdio0 {
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi
index 069f95f2b628..efdd163eba30 100644
--- a/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi
@@ -6,8 +6,42 @@
 #include <dt-bindings/pinctrl/stm32-pinfunc.h>
 
 &pinctrl {
+	i2c1_pins_a: i2c1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
+				 <STM32_PINMUX('E', 8, AF5)>; /* I2C1_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c1_sleep_pins_a: i2c1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */
+				 <STM32_PINMUX('E', 8, ANALOG)>; /* I2C1_SDA */
+		};
+	};
+
+	i2c5_pins_a: i2c5-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 1, AF4)>, /* I2C5_SCL */
+				 <STM32_PINMUX('H', 6, AF4)>; /* I2C5_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c5_sleep_pins_a: i2c5-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* I2C5_SCL */
+				 <STM32_PINMUX('H', 6, ANALOG)>; /* I2C5_SDA */
+		};
+	};
+
 	sdmmc1_b4_pins_a: sdmmc1-b4-0 {
-		pins1 {
+		pins {
 			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
 				 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
 				 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
@@ -17,12 +51,6 @@
 			drive-push-pull;
 			bias-disable;
 		};
-		pins2 {
-			pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
-			slew-rate = <2>;
-			drive-push-pull;
-			bias-disable;
-		};
 	};
 
 	sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
@@ -36,16 +64,104 @@
 			bias-disable;
 		};
 		pins2 {
+			pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+			slew-rate = <1>;
+			drive-open-drain;
+			bias-disable;
+		};
+	};
+
+	sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
+				 <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
+		};
+	};
+
+	sdmmc1_clk_pins_a: sdmmc1-clk-0 {
+		pins {
 			pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
-			slew-rate = <2>;
+			slew-rate = <1>;
 			drive-push-pull;
 			bias-disable;
 		};
-		pins3 {
-			pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+	};
+
+	sdmmc2_b4_pins_a: sdmmc2-b4-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 14, AF10)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 15, AF10)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, AF10)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, AF10)>, /* SDMMC2_D3 */
+				 <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 14, AF10)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 15, AF10)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, AF10)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, AF10)>; /* SDMMC2_D3 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
 			slew-rate = <1>;
 			drive-open-drain;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 15, ANALOG)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */
+				 <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */
+				 <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */
+		};
+	};
+
+	sdmmc2_clk_pins_a: sdmmc2-clk-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 3, AF10)>; /* SDMMC2_CK */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	spi5_pins_a: spi5-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('H', 7, AF6)>, /* SPI5_SCK */
+				 <STM32_PINMUX('H', 3, AF5)>; /* SPI5_MOSI */
 			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 8, AF5)>; /* SPI5_MISO */
+			bias-disable;
+		};
+	};
+
+	spi5_sleep_pins_a: spi5-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 7, ANALOG)>, /* SPI5_SCK */
+				 <STM32_PINMUX('A', 8, ANALOG)>, /* SPI5_MISO */
+				 <STM32_PINMUX('H', 3, ANALOG)>; /* SPI5_MOSI */
 		};
 	};
 
diff --git a/arch/arm/boot/dts/stm32mp131.dtsi b/arch/arm/boot/dts/stm32mp131.dtsi
index 86126dc0d898..dd35a607073d 100644
--- a/arch/arm/boot/dts/stm32mp131.dtsi
+++ b/arch/arm/boot/dts/stm32mp131.dtsi
@@ -4,6 +4,8 @@
  * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
  */
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/stm32mp13-clks.h>
+#include <dt-bindings/reset/stm32mp13-resets.h>
 
 / {
 	#address-cells = <1>;
@@ -27,53 +29,28 @@
 		interrupt-parent = <&intc>;
 	};
 
-	clocks {
-		clk_axi: clk-axi {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <266500000>;
+	firmware {
+		optee {
+			method = "smc";
+			compatible = "linaro,optee-tz";
 		};
 
-		clk_hse: clk-hse {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <24000000>;
-		};
-
-		clk_hsi: clk-hsi {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <64000000>;
-		};
-
-		clk_lsi: clk-lsi {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32000>;
-		};
-
-		clk_pclk3: clk-pclk3 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <104438965>;
-		};
-
-		clk_pclk4: clk-pclk4 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <133250000>;
-		};
+		scmi: scmi {
+			compatible = "linaro,scmi-optee";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			linaro,optee-channel-id = <0>;
+			shmem = <&scmi_shm>;
 
-		clk_pll4_p: clk-pll4_p {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <50000000>;
-		};
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
 
-		clk_pll4_r: clk-pll4_r {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <99000000>;
+			scmi_reset: protocol@16 {
+				reg = <0x16>;
+				#reset-cells = <1>;
+			};
 		};
 	};
 
@@ -92,10 +69,10 @@
 
 	timer {
 		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
 		interrupt-parent = <&intc>;
 		always-on;
 	};
@@ -107,42 +84,319 @@
 		interrupt-parent = <&intc>;
 		ranges;
 
+		scmi_sram: sram@2ffff000 {
+			compatible = "mmio-sram";
+			reg = <0x2ffff000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x2ffff000 0x1000>;
+
+			scmi_shm: scmi-sram@0 {
+				compatible = "arm,scmi-shmem";
+				reg = <0 0x80>;
+			};
+		};
+
+		spi2: spi@4000b000 {
+			compatible = "st,stm32h7-spi";
+			reg = <0x4000b000 0x400>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI2_K>;
+			resets = <&rcc SPI2_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&dmamux1 39 0x400 0x01>,
+			       <&dmamux1 40 0x400 0x01>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		spi3: spi@4000c000 {
+			compatible = "st,stm32h7-spi";
+			reg = <0x4000c000 0x400>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI3_K>;
+			resets = <&rcc SPI3_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&dmamux1 61 0x400 0x01>,
+			       <&dmamux1 62 0x400 0x01>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		uart4: serial@40010000 {
 			compatible = "st,stm32h7-uart";
 			reg = <0x40010000 0x400>;
 			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_hsi>;
+			clocks = <&rcc UART4_K>;
+			resets = <&rcc UART4_R>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@40012000 {
+			compatible = "st,stm32mp13-i2c";
+			reg = <0x40012000 0x400>;
+			interrupt-names = "event", "error";
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc I2C1_K>;
+			resets = <&rcc I2C1_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&dmamux1 33 0x400 0x1>,
+			       <&dmamux1 34 0x400 0x1>;
+			dma-names = "rx", "tx";
+			st,syscfg-fmp = <&syscfg 0x4 0x1>;
+			i2c-analog-filter;
 			status = "disabled";
 		};
 
+		i2c2: i2c@40013000 {
+			compatible = "st,stm32mp13-i2c";
+			reg = <0x40013000 0x400>;
+			interrupt-names = "event", "error";
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc I2C2_K>;
+			resets = <&rcc I2C2_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&dmamux1 35 0x400 0x1>,
+			       <&dmamux1 36 0x400 0x1>;
+			dma-names = "rx", "tx";
+			st,syscfg-fmp = <&syscfg 0x4 0x2>;
+			i2c-analog-filter;
+			status = "disabled";
+		};
+
+		spi1: spi@44004000 {
+			compatible = "st,stm32h7-spi";
+			reg = <0x44004000 0x400>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI1_K>;
+			resets = <&rcc SPI1_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&dmamux1 37 0x400 0x01>,
+			       <&dmamux1 38 0x400 0x01>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		dma1: dma-controller@48000000 {
+			compatible = "st,stm32-dma";
+			reg = <0x48000000 0x400>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc DMA1>;
+			resets = <&rcc DMA1_R>;
+			#dma-cells = <4>;
+			st,mem2mem;
+			dma-requests = <8>;
+		};
+
+		dma2: dma-controller@48001000 {
+			compatible = "st,stm32-dma";
+			reg = <0x48001000 0x400>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc DMA2>;
+			resets = <&rcc DMA2_R>;
+			#dma-cells = <4>;
+			st,mem2mem;
+			dma-requests = <8>;
+		};
+
+		dmamux1: dma-router@48002000 {
+			compatible = "st,stm32h7-dmamux";
+			reg = <0x48002000 0x40>;
+			clocks = <&rcc DMAMUX1>;
+			resets = <&rcc DMAMUX1_R>;
+			#dma-cells = <3>;
+			dma-masters = <&dma1 &dma2>;
+			dma-requests = <128>;
+			dma-channels = <16>;
+		};
+
+		spi4: spi@4c002000 {
+			compatible = "st,stm32h7-spi";
+			reg = <0x4c002000 0x400>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI4_K>;
+			resets = <&rcc SPI4_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&dmamux1 83 0x400 0x01>,
+			       <&dmamux1 84 0x400 0x01>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		spi5: spi@4c003000 {
+			compatible = "st,stm32h7-spi";
+			reg = <0x4c003000 0x400>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI5_K>;
+			resets = <&rcc SPI5_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&dmamux1 85 0x400 0x01>,
+			       <&dmamux1 86 0x400 0x01>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2c3: i2c@4c004000 {
+			compatible = "st,stm32mp13-i2c";
+			reg = <0x4c004000 0x400>;
+			interrupt-names = "event", "error";
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc I2C3_K>;
+			resets = <&rcc I2C3_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&dmamux1 73 0x400 0x1>,
+			       <&dmamux1 74 0x400 0x1>;
+			dma-names = "rx", "tx";
+			st,syscfg-fmp = <&syscfg 0x4 0x4>;
+			i2c-analog-filter;
+			status = "disabled";
+		};
+
+		i2c4: i2c@4c005000 {
+			compatible = "st,stm32mp13-i2c";
+			reg = <0x4c005000 0x400>;
+			interrupt-names = "event", "error";
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc I2C4_K>;
+			resets = <&rcc I2C4_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&dmamux1 75 0x400 0x1>,
+			       <&dmamux1 76 0x400 0x1>;
+			dma-names = "rx", "tx";
+			st,syscfg-fmp = <&syscfg 0x4 0x8>;
+			i2c-analog-filter;
+			status = "disabled";
+		};
+
+		i2c5: i2c@4c006000 {
+			compatible = "st,stm32mp13-i2c";
+			reg = <0x4c006000 0x400>;
+			interrupt-names = "event", "error";
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc I2C5_K>;
+			resets = <&rcc I2C5_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&dmamux1 115 0x400 0x1>,
+			       <&dmamux1 116 0x400 0x1>;
+			dma-names = "rx", "tx";
+			st,syscfg-fmp = <&syscfg 0x4 0x10>;
+			i2c-analog-filter;
+			status = "disabled";
+		};
+
+		rcc: rcc@50000000 {
+			compatible = "st,stm32mp13-rcc", "syscon";
+			reg = <0x50000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			clock-names = "hse", "hsi", "csi", "lse", "lsi";
+			clocks = <&scmi_clk CK_SCMI_HSE>,
+				 <&scmi_clk CK_SCMI_HSI>,
+				 <&scmi_clk CK_SCMI_CSI>,
+				 <&scmi_clk CK_SCMI_LSE>,
+				 <&scmi_clk CK_SCMI_LSI>;
+		};
+
+		exti: interrupt-controller@5000d000 {
+			compatible = "st,stm32mp13-exti", "syscon";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x5000d000 0x400>;
+		};
+
 		syscfg: syscon@50020000 {
 			compatible = "st,stm32mp157-syscfg", "syscon";
 			reg = <0x50020000 0x400>;
-			clocks = <&clk_pclk3>;
+			clocks = <&rcc SYSCFG>;
+		};
+
+		mdma: dma-controller@58000000 {
+			compatible = "st,stm32h7-mdma";
+			reg = <0x58000000 0x1000>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc MDMA>;
+			#dma-cells = <5>;
+			dma-channels = <32>;
+			dma-requests = <48>;
 		};
 
 		sdmmc1: mmc@58005000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			arm,primecell-periphid = <0x00253180>;
+			compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x20253180>;
 			reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
 			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "cmd_irq";
-			clocks = <&clk_pll4_p>;
+			clocks = <&rcc SDMMC1_K>;
 			clock-names = "apb_pclk";
+			resets = <&rcc SDMMC1_R>;
 			cap-sd-highspeed;
 			cap-mmc-highspeed;
-			max-frequency = <120000000>;
+			max-frequency = <130000000>;
+			status = "disabled";
+		};
+
+		sdmmc2: mmc@58007000 {
+			compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x20253180>;
+			reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cmd_irq";
+			clocks = <&rcc SDMMC2_K>;
+			clock-names = "apb_pclk";
+			resets = <&rcc SDMMC2_R>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <130000000>;
 			status = "disabled";
 		};
 
 		iwdg2: watchdog@5a002000 {
 			compatible = "st,stm32mp1-iwdg";
 			reg = <0x5a002000 0x400>;
-			clocks = <&clk_pclk4>, <&clk_lsi>;
+			clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>;
 			clock-names = "pclk", "lsi";
 			status = "disabled";
 		};
 
+		rtc: rtc@5c004000 {
+			compatible = "st,stm32mp1-rtc";
+			reg = <0x5c004000 0x400>;
+			interrupts-extended = <&exti 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk CK_SCMI_RTCAPB>,
+				 <&scmi_clk CK_SCMI_RTC>;
+			clock-names = "pclk", "rtc_ck";
+			status = "disabled";
+		};
+
 		bsec: efuse@5c005000 {
 			compatible = "st,stm32mp15-bsec";
 			reg = <0x5c005000 0x400>;
@@ -164,11 +418,13 @@
 		 * Break node order to solve dependency probe issue between
 		 * pinctrl and exti.
 		 */
-		pinctrl: pin-controller@50002000 {
+		pinctrl: pinctrl@50002000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "st,stm32mp135-pinctrl";
 			ranges = <0 0x50002000 0x8400>;
+			interrupt-parent = <&exti>;
+			st,syscfg = <&exti 0x60 0xff>;
 			pins-are-numbered;
 
 			gpioa: gpio@50002000 {
@@ -177,7 +433,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x0 0x400>;
-				clocks = <&clk_pclk4>;
+				clocks = <&rcc GPIOA>;
 				st,bank-name = "GPIOA";
 				ngpios = <16>;
 				gpio-ranges = <&pinctrl 0 0 16>;
@@ -189,7 +445,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x1000 0x400>;
-				clocks = <&clk_pclk4>;
+				clocks = <&rcc GPIOB>;
 				st,bank-name = "GPIOB";
 				ngpios = <16>;
 				gpio-ranges = <&pinctrl 0 16 16>;
@@ -201,7 +457,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x2000 0x400>;
-				clocks = <&clk_pclk4>;
+				clocks = <&rcc GPIOC>;
 				st,bank-name = "GPIOC";
 				ngpios = <16>;
 				gpio-ranges = <&pinctrl 0 32 16>;
@@ -213,7 +469,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x3000 0x400>;
-				clocks = <&clk_pclk4>;
+				clocks = <&rcc GPIOD>;
 				st,bank-name = "GPIOD";
 				ngpios = <16>;
 				gpio-ranges = <&pinctrl 0 48 16>;
@@ -225,7 +481,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x4000 0x400>;
-				clocks = <&clk_pclk4>;
+				clocks = <&rcc GPIOE>;
 				st,bank-name = "GPIOE";
 				ngpios = <16>;
 				gpio-ranges = <&pinctrl 0 64 16>;
@@ -237,7 +493,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x5000 0x400>;
-				clocks = <&clk_pclk4>;
+				clocks = <&rcc GPIOF>;
 				st,bank-name = "GPIOF";
 				ngpios = <16>;
 				gpio-ranges = <&pinctrl 0 80 16>;
@@ -249,7 +505,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x6000 0x400>;
-				clocks = <&clk_pclk4>;
+				clocks = <&rcc GPIOG>;
 				st,bank-name = "GPIOG";
 				ngpios = <16>;
 				gpio-ranges = <&pinctrl 0 96 16>;
@@ -261,7 +517,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x7000 0x400>;
-				clocks = <&clk_pclk4>;
+				clocks = <&rcc GPIOH>;
 				st,bank-name = "GPIOH";
 				ngpios = <15>;
 				gpio-ranges = <&pinctrl 0 112 15>;
@@ -273,7 +529,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x8000 0x400>;
-				clocks = <&clk_pclk4>;
+				clocks = <&rcc GPIOI>;
 				st,bank-name = "GPIOI";
 				ngpios = <8>;
 				gpio-ranges = <&pinctrl 0 128 8>;
diff --git a/arch/arm/boot/dts/stm32mp133.dtsi b/arch/arm/boot/dts/stm32mp133.dtsi
index 0fb1386257cf..531c263c9f46 100644
--- a/arch/arm/boot/dts/stm32mp133.dtsi
+++ b/arch/arm/boot/dts/stm32mp133.dtsi
@@ -15,7 +15,7 @@
 			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "int0", "int1";
-			clocks = <&clk_hse>, <&clk_pll4_r>;
+			clocks = <&scmi_clk CK_SCMI_HSE>, <&rcc FDCAN_K>;
 			clock-names = "hclk", "cclk";
 			bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
 			status = "disabled";
@@ -28,7 +28,7 @@
 			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "int0", "int1";
-			clocks = <&clk_hse>, <&clk_pll4_r>;
+			clocks = <&scmi_clk CK_SCMI_HSE>, <&rcc FDCAN_K>;
 			clock-names = "hclk", "cclk";
 			bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
 			status = "disabled";
diff --git a/arch/arm/boot/dts/stm32mp135f-dk.dts b/arch/arm/boot/dts/stm32mp135f-dk.dts
index 7e96d9e36217..de341d17e87d 100644
--- a/arch/arm/boot/dts/stm32mp135f-dk.dts
+++ b/arch/arm/boot/dts/stm32mp135f-dk.dts
@@ -6,6 +6,9 @@
 
 /dts-v1/;
 
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 #include "stm32mp135.dtsi"
 #include "stm32mp13xf.dtsi"
 #include "stm32mp13-pinctrl.dtsi"
@@ -23,6 +26,39 @@
 		reg = <0xc0000000 0x20000000>;
 	};
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		optee@dd000000 {
+			reg = <0xdd000000 0x3000000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-pa13 {
+			label = "User-PA13";
+			linux,code = <BTN_1>;
+			gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
 	vdd_sd: vdd-sd {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_sd";
@@ -32,15 +68,46 @@
 	};
 };
 
+&i2c1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c1_pins_a>;
+	pinctrl-1 = <&i2c1_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <96>;
+	i2c-scl-falling-time-ns = <3>;
+	clock-frequency = <1000000>;
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&i2c5 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c5_pins_a>;
+	pinctrl-1 = <&i2c5_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <170>;
+	i2c-scl-falling-time-ns = <5>;
+	clock-frequency = <400000>;
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
 &iwdg2 {
 	timeout-sec = <32>;
 	status = "okay";
 };
 
+&rtc {
+	status = "okay";
+};
+
 &sdmmc1 {
-	pinctrl-names = "default", "opendrain";
-	pinctrl-0 = <&sdmmc1_b4_pins_a>;
-	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_clk_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_clk_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
 	broken-cd;
 	disable-wp;
 	st,neg-edge;
@@ -49,6 +116,13 @@
 	status = "okay";
 };
 
+&spi5 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&spi5_pins_a>;
+	pinctrl-1 = <&spi5_sleep_pins_a>;
+	status = "disabled";
+};
+
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart4_pins_a>;
diff --git a/arch/arm/boot/dts/stm32mp13xc.dtsi b/arch/arm/boot/dts/stm32mp13xc.dtsi
index fa6889e30591..4d00e7592882 100644
--- a/arch/arm/boot/dts/stm32mp13xc.dtsi
+++ b/arch/arm/boot/dts/stm32mp13xc.dtsi
@@ -10,7 +10,8 @@
 			compatible = "st,stm32mp1-cryp";
 			reg = <0x54002000 0x400>;
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_axi>;
+			clocks = <&rcc CRYP1>;
+			resets = <&rcc CRYP1_R>;
 			status = "disabled";
 		};
 	};
diff --git a/arch/arm/boot/dts/stm32mp13xf.dtsi b/arch/arm/boot/dts/stm32mp13xf.dtsi
index fa6889e30591..4d00e7592882 100644
--- a/arch/arm/boot/dts/stm32mp13xf.dtsi
+++ b/arch/arm/boot/dts/stm32mp13xf.dtsi
@@ -10,7 +10,8 @@
 			compatible = "st,stm32mp1-cryp";
 			reg = <0x54002000 0x400>;
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_axi>;
+			clocks = <&rcc CRYP1>;
+			resets = <&rcc CRYP1_R>;
 			status = "disabled";
 		};
 	};
diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
index 3b65130affec..a9d2bec99014 100644
--- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -151,6 +151,43 @@
 		};
 	};
 
+	dcmi_pins_c: dcmi-2 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 4,  AF13)>,/* DCMI_HSYNC */
+				 <STM32_PINMUX('B', 7,  AF13)>,/* DCMI_VSYNC */
+				 <STM32_PINMUX('A', 6,  AF13)>,/* DCMI_PIXCLK */
+				 <STM32_PINMUX('A', 9,  AF13)>,/* DCMI_D0 */
+				 <STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */
+				 <STM32_PINMUX('E', 0, AF13)>,/* DCMI_D2 */
+				 <STM32_PINMUX('E', 1, AF13)>,/* DCMI_D3 */
+				 <STM32_PINMUX('H', 14, AF13)>,/* DCMI_D4 */
+				 <STM32_PINMUX('I', 4,  AF13)>,/* DCMI_D5 */
+				 <STM32_PINMUX('I', 6,  AF13)>,/* DCMI_D6 */
+				 <STM32_PINMUX('E', 6,  AF13)>,/* DCMI_D7 */
+				 <STM32_PINMUX('I', 1,  AF13)>,/* DCMI_D8 */
+				 <STM32_PINMUX('H', 7,  AF13)>;/* DCMI_D9 */
+			bias-pull-up;
+		};
+	};
+
+	dcmi_sleep_pins_c: dcmi-sleep-2 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 4,  ANALOG)>,/* DCMI_HSYNC */
+				 <STM32_PINMUX('B', 7,  ANALOG)>,/* DCMI_VSYNC */
+				 <STM32_PINMUX('A', 6,  ANALOG)>,/* DCMI_PIXCLK */
+				 <STM32_PINMUX('A', 9,  ANALOG)>,/* DCMI_D0 */
+				 <STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */
+				 <STM32_PINMUX('E', 0, ANALOG)>,/* DCMI_D2 */
+				 <STM32_PINMUX('E', 1, ANALOG)>,/* DCMI_D3 */
+				 <STM32_PINMUX('H', 14, ANALOG)>,/* DCMI_D4 */
+				 <STM32_PINMUX('I', 4,  ANALOG)>,/* DCMI_D5 */
+				 <STM32_PINMUX('I', 6,  ANALOG)>,/* DCMI_D6 */
+				 <STM32_PINMUX('E', 6,  ANALOG)>,/* DCMI_D7 */
+				 <STM32_PINMUX('I', 1,  ANALOG)>,/* DCMI_D8 */
+				 <STM32_PINMUX('H', 7,  ANALOG)>;/* DCMI_D9 */
+		};
+	};
+
 	ethernet0_rgmii_pins_a: rgmii-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
@@ -338,6 +375,81 @@
 		};
 	};
 
+	ethernet0_rmii_pins_b: rmii-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 5, AF0)>, /* ETH1_CLK */
+				<STM32_PINMUX('C', 1, AF11)>, /* ETH1_MDC */
+				<STM32_PINMUX('G', 13, AF11)>, /* ETH1_TXD0 */
+				<STM32_PINMUX('G', 14, AF11)>; /* ETH1_TXD1 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH1_MDIO */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('A', 7, AF11)>, /* ETH1_CRS_DV */
+				<STM32_PINMUX('C', 4, AF11)>, /* ETH1_RXD0 */
+				<STM32_PINMUX('C', 5, AF11)>; /* ETH1_RXD1 */
+			bias-disable;
+		};
+		pins4 {
+			pinmux = <STM32_PINMUX('B', 11, AF11)>; /* ETH1_TX_EN */
+		};
+	};
+
+	ethernet0_rmii_sleep_pins_b: rmii-sleep-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 2, ANALOG)>, /* ETH1_MDIO */
+				<STM32_PINMUX('A', 7, ANALOG)>, /* ETH1_CRS_DV */
+				<STM32_PINMUX('B', 5, ANALOG)>, /* ETH1_CLK */
+				<STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_TX_EN */
+				<STM32_PINMUX('C', 1, ANALOG)>, /* ETH1_MDC */
+				<STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RXD0 */
+				<STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RXD1 */
+				<STM32_PINMUX('G', 13, ANALOG)>, /* ETH1_TXD0 */
+				<STM32_PINMUX('G', 14, ANALOG)>; /* ETH1_TXD1 */
+		};
+	};
+
+	ethernet0_rmii_pins_c: rmii-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH1_RMII_TXD0 */
+				 <STM32_PINMUX('G', 14, AF11)>, /* ETH1_RMII_TXD1 */
+				 <STM32_PINMUX('B', 11, AF11)>, /* ETH1_RMII_TX_EN */
+				 <STM32_PINMUX('A', 1, AF11)>,  /* ETH1_RMII_REF_CLK */
+				 <STM32_PINMUX('A', 2, AF11)>,  /* ETH1_MDIO */
+				 <STM32_PINMUX('C', 1, AF11)>;  /* ETH1_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 4, AF11)>,  /* ETH1_RMII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>,  /* ETH1_RMII_RXD1 */
+				 <STM32_PINMUX('A', 7, AF11)>;  /* ETH1_RMII_CRS_DV */
+			bias-disable;
+		};
+	};
+
+	ethernet0_rmii_sleep_pins_c: rmii-sleep-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH1_RMII_TXD0 */
+				 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH1_RMII_TXD1 */
+				 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */
+				 <STM32_PINMUX('A', 2, ANALOG)>,  /* ETH1_MDIO */
+				 <STM32_PINMUX('C', 1, ANALOG)>,  /* ETH1_MDC */
+				 <STM32_PINMUX('C', 4, ANALOG)>,  /* ETH1_RMII_RXD0 */
+				 <STM32_PINMUX('C', 5, ANALOG)>,  /* ETH1_RMII_RXD1 */
+				 <STM32_PINMUX('A', 1, ANALOG)>,  /* ETH1_RMII_REF_CLK */
+				 <STM32_PINMUX('A', 7, ANALOG)>;  /* ETH1_RMII_CRS_DV */
+		};
+	};
+
 	fmc_pins_a: fmc-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
@@ -848,6 +960,36 @@
 		};
 	};
 
+	mco1_pins_a: mco1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 13, AF2)>; /* MCO1 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	mco1_sleep_pins_a: mco1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 13, ANALOG)>; /* MCO1 */
+		};
+	};
+
+	mco2_pins_a: mco2-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 2, AF1)>; /* MCO2 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+	};
+
+	mco2_sleep_pins_a: mco2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 2, ANALOG)>; /* MCO2 */
+		};
+	};
+
 	m_can1_pins_a: m-can1-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */
@@ -888,6 +1030,26 @@
 		};
 	};
 
+	m_can1_pins_c: m-can1-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('H', 14, AF9)>; /* CAN1_RX */
+			bias-disable;
+		};
+	};
+
+	m_can1_sleep_pins_c: m_can1-sleep-2 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 13, ANALOG)>, /* CAN1_TX */
+				 <STM32_PINMUX('H', 14, ANALOG)>; /* CAN1_RX */
+		};
+	};
+
 	m_can2_pins_a: m-can2-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('B', 13, AF9)>; /* CAN2_TX */
@@ -927,6 +1089,21 @@
 		};
 	};
 
+	pwm1_pins_b: pwm1-1 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 9, AF1)>; /* TIM1_CH1 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm1_sleep_pins_b: pwm1-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 9, ANALOG)>; /* TIM1_CH1 */
+		};
+	};
+
 	pwm2_pins_a: pwm2-0 {
 		pins {
 			pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */
@@ -1084,7 +1261,7 @@
 	};
 
 	qspi_bk1_pins_a: qspi-bk1-0 {
-		pins1 {
+		pins {
 			pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
 				 <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */
 				 <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */
@@ -1093,12 +1270,6 @@
 			drive-push-pull;
 			slew-rate = <1>;
 		};
-		pins2 {
-			pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */
-			bias-pull-up;
-			drive-push-pull;
-			slew-rate = <1>;
-		};
 	};
 
 	qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 {
@@ -1106,13 +1277,12 @@
 			pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* QSPI_BK1_IO0 */
 				 <STM32_PINMUX('F', 9, ANALOG)>, /* QSPI_BK1_IO1 */
 				 <STM32_PINMUX('F', 7, ANALOG)>, /* QSPI_BK1_IO2 */
-				 <STM32_PINMUX('F', 6, ANALOG)>, /* QSPI_BK1_IO3 */
-				 <STM32_PINMUX('B', 6, ANALOG)>; /* QSPI_BK1_NCS */
+				 <STM32_PINMUX('F', 6, ANALOG)>; /* QSPI_BK1_IO3 */
 		};
 	};
 
 	qspi_bk2_pins_a: qspi-bk2-0 {
-		pins1 {
+		pins {
 			pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */
 				 <STM32_PINMUX('H', 3, AF9)>, /* QSPI_BK2_IO1 */
 				 <STM32_PINMUX('G', 10, AF11)>, /* QSPI_BK2_IO2 */
@@ -1121,7 +1291,34 @@
 			drive-push-pull;
 			slew-rate = <1>;
 		};
-		pins2 {
+	};
+
+	qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* QSPI_BK2_IO0 */
+				 <STM32_PINMUX('H', 3, ANALOG)>, /* QSPI_BK2_IO1 */
+				 <STM32_PINMUX('G', 10, ANALOG)>, /* QSPI_BK2_IO2 */
+				 <STM32_PINMUX('G', 7, ANALOG)>; /* QSPI_BK2_IO3 */
+		};
+	};
+
+	qspi_cs1_pins_a: qspi-cs1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */
+			bias-pull-up;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	qspi_cs1_sleep_pins_a: qspi-cs1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 6, ANALOG)>; /* QSPI_BK1_NCS */
+		};
+	};
+
+	qspi_cs2_pins_a: qspi-cs2-0 {
+		pins {
 			pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */
 			bias-pull-up;
 			drive-push-pull;
@@ -1129,13 +1326,9 @@
 		};
 	};
 
-	qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 {
+	qspi_cs2_sleep_pins_a: qspi-cs2-sleep-0 {
 		pins {
-			pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* QSPI_BK2_IO0 */
-				 <STM32_PINMUX('H', 3, ANALOG)>, /* QSPI_BK2_IO1 */
-				 <STM32_PINMUX('G', 10, ANALOG)>, /* QSPI_BK2_IO2 */
-				 <STM32_PINMUX('G', 7, ANALOG)>, /* QSPI_BK2_IO3 */
-				 <STM32_PINMUX('C', 0, ANALOG)>; /* QSPI_BK2_NCS */
+			pinmux = <STM32_PINMUX('C', 0, ANALOG)>; /* QSPI_BK2_NCS */
 		};
 	};
 
@@ -1190,7 +1383,7 @@
 		};
 	};
 
-	sai2a_sleep_pins_c: sai2a-2 {
+	sai2a_sleep_pins_c: sai2a-sleep-2 {
 		pins {
 			pinmux = <STM32_PINMUX('D', 13, ANALOG)>, /* SAI2_SCK_A */
 				 <STM32_PINMUX('D', 11, ANALOG)>, /* SAI2_SD_A */
@@ -1689,15 +1882,30 @@
 
 	spi2_pins_a: spi2-0 {
 		pins1 {
-			pinmux = <STM32_PINMUX('B', 10, AF5)>, /* SPI1_SCK */
-				 <STM32_PINMUX('I', 3, AF5)>; /* SPI1_MOSI */
+			pinmux = <STM32_PINMUX('B', 10, AF5)>, /* SPI2_SCK */
+				 <STM32_PINMUX('I', 3, AF5)>; /* SPI2_MOSI */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI2_MISO */
+			bias-disable;
+		};
+	};
+
+	spi2_pins_b: spi2-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('I', 1, AF5)>, /* SPI2_SCK */
+				 <STM32_PINMUX('I', 3, AF5)>; /* SPI2_MOSI */
 			bias-disable;
 			drive-push-pull;
 			slew-rate = <1>;
 		};
 
 		pins2 {
-			pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI1_MISO */
+			pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI2_MISO */
 			bias-disable;
 		};
 	};
@@ -1779,6 +1987,49 @@
 		};
 	};
 
+	uart4_pins_d: uart4-3 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 13, AF8)>; /* UART4_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	uart4_idle_pins_d: uart4-idle-3 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 13, ANALOG)>; /* UART4_TX */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	uart4_sleep_pins_d: uart4-sleep-3 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 13, ANALOG)>, /* UART4_TX */
+				 <STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */
+		};
+	};
+
+	uart5_pins_a: uart5-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 13, AF14)>; /* UART5_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 5, AF12)>; /* UART5_RX */
+			bias-disable;
+		};
+	};
+
 	uart7_pins_a: uart7-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART7_TX */
@@ -2042,6 +2293,83 @@
 		};
 	};
 
+	usart3_pins_d: usart3-3 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 9, AF7)>, /* USART3_RX */
+				 <STM32_PINMUX('D', 11, AF7)>; /* USART3_CTS_NSS */
+			bias-disable;
+		};
+	};
+
+	usart3_idle_pins_d: usart3-idle-3 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
+				 <STM32_PINMUX('D', 11, ANALOG)>; /* USART3_CTS_NSS */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 9, AF7)>; /* USART3_RX */
+			bias-disable;
+		};
+	};
+
+	usart3_sleep_pins_d: usart3-sleep-3 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
+				 <STM32_PINMUX('D', 11, ANALOG)>, /* USART3_CTS_NSS */
+				 <STM32_PINMUX('D', 9, ANALOG)>; /* USART3_RX */
+		};
+	};
+
+	usart3_pins_e: usart3-4 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 11, AF7)>, /* USART3_RX */
+				 <STM32_PINMUX('D', 11, AF7)>; /* USART3_CTS_NSS */
+			bias-pull-up;
+		};
+	};
+
+	usart3_idle_pins_e: usart3-idle-4 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+				 <STM32_PINMUX('D', 11, ANALOG)>; /* USART3_CTS_NSS */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('B', 11, AF7)>; /* USART3_RX */
+			bias-pull-up;
+		};
+	};
+
+	usart3_sleep_pins_e: usart3-sleep-4 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
+				 <STM32_PINMUX('D', 11, ANALOG)>, /* USART3_CTS_NSS */
+				 <STM32_PINMUX('B', 11, ANALOG)>; /* USART3_RX */
+		};
+	};
+
 	usbotg_hs_pins_a: usbotg-hs-0 {
 		pins {
 			pinmux = <STM32_PINMUX('A', 10, ANALOG)>; /* OTG_ID */
@@ -2120,4 +2448,19 @@
 			bias-disable;
 		};
 	};
+
+	spi1_pins_b: spi1-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 5, AF5)>, /* SPI1_SCK */
+				 <STM32_PINMUX('B', 5, AF5)>; /* SPI1_MOSI */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 6, AF5)>; /* SPI1_MISO */
+			bias-disable;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/stm32mp15-scmi.dtsi b/arch/arm/boot/dts/stm32mp15-scmi.dtsi
new file mode 100644
index 000000000000..543f24c2f4f6
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp15-scmi.dtsi
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2022 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/ {
+	firmware {
+		optee: optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		scmi: scmi {
+			compatible = "linaro,scmi-optee";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			linaro,optee-channel-id = <0>;
+			shmem = <&scmi_shm>;
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+
+			scmi_reset: protocol@16 {
+				reg = <0x16>;
+				#reset-cells = <1>;
+			};
+
+			scmi_voltd: protocol@17 {
+				reg = <0x17>;
+
+				scmi_reguls: regulators {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					scmi_reg11: reg11@0 {
+						reg = <0>;
+						regulator-name = "reg11";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <1100000>;
+					};
+
+					scmi_reg18: reg18@1 {
+						voltd-name = "reg18";
+						reg = <1>;
+						regulator-name = "reg18";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					scmi_usb33: usb33@2 {
+						reg = <2>;
+						regulator-name = "usb33";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+				};
+			};
+		};
+	};
+
+	soc {
+		scmi_sram: sram@2ffff000 {
+			compatible = "mmio-sram";
+			reg = <0x2ffff000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x2ffff000 0x1000>;
+
+			scmi_shm: scmi-sram@0 {
+				compatible = "arm,scmi-shmem";
+				reg = <0 0x80>;
+			};
+		};
+	};
+};
+
+&reg11 {
+	status = "disabled";
+};
+
+&reg18 {
+	status = "disabled";
+};
+
+&usb33 {
+	status = "disabled";
+};
+
+&usbotg_hs {
+	usb33d-supply = <&scmi_usb33>;
+};
+
+&usbphyc {
+	vdda1v1-supply = <&scmi_reg11>;
+	vdda1v8-supply = <&scmi_reg18>;
+};
+
+/delete-node/ &clk_hse;
+/delete-node/ &clk_hsi;
+/delete-node/ &clk_lse;
+/delete-node/ &clk_lsi;
+/delete-node/ &clk_csi;
diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
index 1cfc2f011e70..e02b3f5d44cb 100644
--- a/arch/arm/boot/dts/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@@ -45,10 +45,10 @@
 
 	timer {
 		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
 		interrupt-parent = <&intc>;
 	};
 
@@ -127,6 +127,8 @@
 			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40000000 0x400>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global";
 			clocks = <&rcc TIM2_K>;
 			clock-names = "int";
 			dmas = <&dmamux1 18 0x400 0x1>,
@@ -160,6 +162,8 @@
 			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40001000 0x400>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global";
 			clocks = <&rcc TIM3_K>;
 			clock-names = "int";
 			dmas = <&dmamux1 23 0x400 0x1>,
@@ -194,6 +198,8 @@
 			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40002000 0x400>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global";
 			clocks = <&rcc TIM4_K>;
 			clock-names = "int";
 			dmas = <&dmamux1 29 0x400 0x1>,
@@ -226,6 +232,8 @@
 			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40003000 0x400>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global";
 			clocks = <&rcc TIM5_K>;
 			clock-names = "int";
 			dmas = <&dmamux1 55 0x400 0x1>,
@@ -260,6 +268,8 @@
 			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40004000 0x400>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global";
 			clocks = <&rcc TIM6_K>;
 			clock-names = "int";
 			dmas = <&dmamux1 69 0x400 0x1>;
@@ -278,6 +288,8 @@
 			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40005000 0x400>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global";
 			clocks = <&rcc TIM7_K>;
 			clock-names = "int";
 			dmas = <&dmamux1 70 0x400 0x1>;
@@ -296,6 +308,8 @@
 			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40006000 0x400>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global";
 			clocks = <&rcc TIM12_K>;
 			clock-names = "int";
 			status = "disabled";
@@ -318,6 +332,8 @@
 			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40007000 0x400>;
+			interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global";
 			clocks = <&rcc TIM13_K>;
 			clock-names = "int";
 			status = "disabled";
@@ -340,6 +356,8 @@
 			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40008000 0x400>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global";
 			clocks = <&rcc TIM14_K>;
 			clock-names = "int";
 			status = "disabled";
@@ -455,6 +473,9 @@
 			interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc USART2_K>;
 			wakeup-source;
+			dmas = <&dmamux1 43 0x400 0x15>,
+			       <&dmamux1 44 0x400 0x11>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -464,6 +485,9 @@
 			interrupts-extended = <&exti 28 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc USART3_K>;
 			wakeup-source;
+			dmas = <&dmamux1 45 0x400 0x15>,
+			       <&dmamux1 46 0x400 0x11>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -473,6 +497,9 @@
 			interrupts-extended = <&exti 30 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc UART4_K>;
 			wakeup-source;
+			dmas = <&dmamux1 63 0x400 0x15>,
+			       <&dmamux1 64 0x400 0x11>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -482,6 +509,9 @@
 			interrupts-extended = <&exti 31 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc UART5_K>;
 			wakeup-source;
+			dmas = <&dmamux1 65 0x400 0x15>,
+			       <&dmamux1 66 0x400 0x11>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -553,7 +583,7 @@
 			compatible = "st,stm32-cec";
 			reg = <0x40016000 0x400>;
 			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc CEC_K>, <&clk_lse>;
+			clocks = <&rcc CEC_K>, <&rcc CEC>;
 			clock-names = "cec", "hdmi-cec";
 			status = "disabled";
 		};
@@ -588,6 +618,9 @@
 			interrupts-extended = <&exti 32 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc UART7_K>;
 			wakeup-source;
+			dmas = <&dmamux1 79 0x400 0x15>,
+			       <&dmamux1 80 0x400 0x11>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -597,6 +630,9 @@
 			interrupts-extended = <&exti 33 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc UART8_K>;
 			wakeup-source;
+			dmas = <&dmamux1 81 0x400 0x15>,
+			       <&dmamux1 82 0x400 0x11>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -605,6 +641,11 @@
 			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x44000000 0x400>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "brk", "up", "trg-com", "cc";
 			clocks = <&rcc TIM1_K>;
 			clock-names = "int";
 			dmas = <&dmamux1 11 0x400 0x1>,
@@ -641,6 +682,11 @@
 			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x44001000 0x400>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "brk", "up", "trg-com", "cc";
 			clocks = <&rcc TIM8_K>;
 			clock-names = "int";
 			dmas = <&dmamux1 47 0x400 0x1>,
@@ -678,6 +724,9 @@
 			interrupts-extended = <&exti 29 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc USART6_K>;
 			wakeup-source;
+			dmas = <&dmamux1 71 0x400 0x15>,
+			       <&dmamux1 72 0x400 0x11>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -725,6 +774,8 @@
 			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x44006000 0x400>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global";
 			clocks = <&rcc TIM15_K>;
 			clock-names = "int";
 			dmas = <&dmamux1 105 0x400 0x1>,
@@ -752,6 +803,8 @@
 			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x44007000 0x400>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global";
 			clocks = <&rcc TIM16_K>;
 			clock-names = "int";
 			dmas = <&dmamux1 109 0x400 0x1>,
@@ -776,6 +829,8 @@
 			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x44008000 0x400>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global";
 			clocks = <&rcc TIM17_K>;
 			clock-names = "int";
 			dmas = <&dmamux1 111 0x400 0x1>,
@@ -1059,7 +1114,7 @@
 		};
 
 		sdmmc3: mmc@48004000 {
-			compatible = "arm,pl18x", "arm,primecell";
+			compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
 			arm,primecell-periphid = <0x00253180>;
 			reg = <0x48004000 0x400>;
 			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
@@ -1096,10 +1151,9 @@
 			reg = <0x4c001000 0x400>;
 			st,proc-id = <0>;
 			interrupts-extended =
-				<&intc GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
-				<&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
-				<&exti 61 1>;
-			interrupt-names = "rx", "tx", "wakeup";
+				<&exti 61 1>,
+				<&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "rx", "tx";
 			clocks = <&rcc IPCC>;
 			wakeup-source;
 			status = "disabled";
@@ -1381,7 +1435,7 @@
 		};
 
 		sdmmc1: mmc@58005000 {
-			compatible = "arm,pl18x", "arm,primecell";
+			compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
 			arm,primecell-periphid = <0x00253180>;
 			reg = <0x58005000 0x1000>;
 			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
@@ -1396,7 +1450,7 @@
 		};
 
 		sdmmc2: mmc@58007000 {
-			compatible = "arm,pl18x", "arm,primecell";
+			compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
 			arm,primecell-periphid = <0x00253180>;
 			reg = <0x58007000 0x1000>;
 			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
@@ -1453,7 +1507,7 @@
 		usbh_ohci: usb@5800c000 {
 			compatible = "generic-ohci";
 			reg = <0x5800c000 0x1000>;
-			clocks = <&rcc USBH>, <&usbphyc>;
+			clocks = <&usbphyc>, <&rcc USBH>;
 			resets = <&rcc USBH_R>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -1462,7 +1516,7 @@
 		usbh_ehci: usb@5800d000 {
 			compatible = "generic-ehci";
 			reg = <0x5800d000 0x1000>;
-			clocks = <&rcc USBH>;
+			clocks = <&usbphyc>, <&rcc USBH>;
 			resets = <&rcc USBH_R>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 			companion = <&usbh_ohci>;
@@ -1560,7 +1614,7 @@
 			reg = <0x5c004000 0x400>;
 			clocks = <&rcc RTCAPB>, <&rcc RTC>;
 			clock-names = "pclk", "rtc_ck";
-			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&exti 19 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
 
@@ -1602,7 +1656,7 @@
 		 * Break node order to solve dependency probe issue between
 		 * pinctrl and exti.
 		 */
-		pinctrl: pin-controller@50002000 {
+		pinctrl: pinctrl@50002000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "st,stm32mp157-pinctrl";
@@ -1733,7 +1787,7 @@
 			};
 		};
 
-		pinctrl_z: pin-controller-z@54004000 {
+		pinctrl_z: pinctrl@54004000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "st,stm32mp157-z-pinctrl";
diff --git a/arch/arm/boot/dts/stm32mp151a-prtt1a.dts b/arch/arm/boot/dts/stm32mp151a-prtt1a.dts
new file mode 100644
index 000000000000..75874eafde11
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp151a-prtt1a.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) Protonic Holland
+ * Author: David Jander <david@protonic.nl>
+ */
+/dts-v1/;
+
+#include "stm32mp151a-prtt1l.dtsi"
+
+/ {
+	model = "Protonic PRTT1A";
+	compatible = "prt,prtt1a", "st,stm32mp151";
+};
+
+&ethernet0 {
+	phy-handle = <&phy0>;
+};
+
+&mdio0 {
+	/* TI DP83TD510E */
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id2000.0181";
+		reg = <0>;
+		interrupts-extended = <&gpioa 4 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpioa 3 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10>;
+		reset-deassert-us = <35>;
+	};
+};
+
+&pwm5_pins_a {
+	pins {
+		pinmux = <STM32_PINMUX('A', 0, AF2)>; /* TIM5_CH1 */
+	};
+};
+
+&pwm5_sleep_pins_a {
+	pins {
+		pinmux = <STM32_PINMUX('A', 0, ANALOG)>; /* TIM5_CH1 */
+	};
+};
+
+&timers5 {
+	status = "okay";
+
+	pwm {
+		pinctrl-0 = <&pwm5_pins_a>;
+		pinctrl-1 = <&pwm5_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/stm32mp151a-prtt1c.dts b/arch/arm/boot/dts/stm32mp151a-prtt1c.dts
new file mode 100644
index 000000000000..7ecf31263abc
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp151a-prtt1c.dts
@@ -0,0 +1,304 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) Protonic Holland
+ * Author: David Jander <david@protonic.nl>
+ */
+/dts-v1/;
+
+#include "stm32mp151a-prtt1l.dtsi"
+
+/ {
+	model = "Protonic PRTT1C";
+	compatible = "prt,prtt1c", "st,stm32mp151";
+
+	clock_ksz9031: clock-ksz9031 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	clock_sja1105: clock-sja1105 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpios = <&gpioc 1 GPIO_ACTIVE_HIGH
+			 &gpioa 2 GPIO_ACTIVE_HIGH>;
+
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpiod 8 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&ethernet0 {
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+};
+
+&gpioa {
+	gpio-line-names =
+		"", "", "", "PHY0_nRESET", "PHY0_nINT", "", "", "",
+		"", "", "", "", "", "", "", "SPI1_nSS";
+};
+
+&gpiod {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"WFM_RESET", "", "", "", "", "", "", "";
+};
+
+&gpioe {
+	gpio-line-names =
+		"SDMMC2_nRESET", "", "", "", "", "", "SPI1_nRESET", "",
+		"", "", "", "", "WFM_nIRQ", "", "", "";
+};
+
+&gpiog {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "PHY3_nINT",
+		"PHY1_nINT", "PHY3_nRESET", "PHY2_nINT", "PHY2_nRESET",
+		"PHY1_nRESET", "SPE1_PWR", "SPE0_PWR", "";
+};
+
+&mdio0 {
+	/* All this DP83TD510E PHYs can't be probed before switch@0 is
+	 * probed so we need to use compatible with PHYid
+	 */
+	/* TI DP83TD510E */
+	t1l0_phy: ethernet-phy@6 {
+		compatible = "ethernet-phy-id2000.0181";
+		reg = <6>;
+		interrupts-extended = <&gpioa 4 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpioa 3 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10>;
+		reset-deassert-us = <35>;
+	};
+
+	/* TI DP83TD510E */
+	t1l1_phy: ethernet-phy@7 {
+		compatible = "ethernet-phy-id2000.0181";
+		reg = <7>;
+		interrupts-extended = <&gpiog 8 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpiog 12 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10>;
+		reset-deassert-us = <35>;
+	};
+
+	/* TI DP83TD510E */
+	t1l2_phy: ethernet-phy@10 {
+		compatible = "ethernet-phy-id2000.0181";
+		reg = <10>;
+		interrupts-extended = <&gpiog 10 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpiog 11 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10>;
+		reset-deassert-us = <35>;
+	};
+
+	/* Micrel KSZ9031 */
+	rj45_phy: ethernet-phy@2 {
+		reg = <2>;
+		interrupts-extended = <&gpiog 7 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <1000>;
+
+		clocks = <&clock_ksz9031>;
+	};
+};
+
+&qspi {
+	status = "disabled";
+};
+
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	no-1-8-v;
+	st,neg-edge;
+	bus-width = <8>;
+	vmmc-supply = <&reg_3v3>;
+	vqmmc-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&sdmmc2_b4_od_pins_a {
+	pins1 {
+		pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+			 <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */
+			 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+			 <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */
+	};
+};
+
+&sdmmc2_b4_pins_a {
+	pins1 {
+		pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+			 <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */
+			 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+			 <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
+			 <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+	};
+};
+
+&sdmmc2_b4_sleep_pins_a {
+	pins {
+		pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */
+			 <STM32_PINMUX('B', 7, ANALOG)>, /* SDMMC2_D1 */
+			 <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */
+			 <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */
+			 <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */
+			 <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */
+	};
+};
+
+&sdmmc2_d47_pins_a {
+	pins {
+		pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
+			 <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
+			 <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */
+			 <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
+	};
+};
+
+&sdmmc2_d47_sleep_pins_a {
+	pins {
+		pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
+			 <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
+			 <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */
+			 <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */
+	};
+};
+
+&sdmmc3 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc3_b4_pins_b>;
+	pinctrl-1 = <&sdmmc3_b4_od_pins_b>;
+	pinctrl-2 = <&sdmmc3_b4_sleep_pins_b>;
+	non-removable;
+	no-1-8-v;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3v3>;
+	vqmmc-supply = <&reg_3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	mmc@1 {
+		compatible = "prt,prtt1c-wfm200", "silabs,wf200";
+		reg = <1>;
+	};
+};
+
+&sdmmc3_b4_od_pins_b {
+	pins1 {
+		pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */
+			 <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */
+			 <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
+			 <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */
+	};
+};
+
+&sdmmc3_b4_pins_b {
+	pins1 {
+		pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */
+			 <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */
+			 <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
+			 <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */
+			 <STM32_PINMUX('D', 0, AF10)>; /* SDMMC3_CMD */
+	};
+};
+
+&sdmmc3_b4_sleep_pins_b {
+	pins {
+		pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* SDMMC3_D0 */
+			 <STM32_PINMUX('D', 4, ANALOG)>, /* SDMMC3_D1 */
+			 <STM32_PINMUX('D', 5, ANALOG)>, /* SDMMC3_D2 */
+			 <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */
+			 <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */
+			 <STM32_PINMUX('D', 0, ANALOG)>; /* SDMMC3_CMD */
+	};
+};
+
+&spi1 {
+	pinctrl-0 = <&spi1_pins_b>;
+	pinctrl-names = "default";
+	cs-gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+
+	switch@0 {
+		compatible = "nxp,sja1105q";
+		reg = <0>;
+		spi-max-frequency = <4000000>;
+		spi-rx-delay-us = <1>;
+		spi-tx-delay-us = <1>;
+		spi-cpha;
+
+		reset-gpios = <&gpioe 6 GPIO_ACTIVE_LOW>;
+
+		clocks = <&clock_sja1105>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "t1l0";
+				phy-mode = "rmii";
+				phy-handle = <&t1l0_phy>;
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "t1l1";
+				phy-mode = "rmii";
+				phy-handle = <&t1l1_phy>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "t1l2";
+				phy-mode = "rmii";
+				phy-handle = <&t1l2_phy>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "rj45";
+				phy-handle = <&rj45_phy>;
+				phy-mode = "rgmii-id";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "cpu";
+				ethernet = <&ethernet0>;
+				phy-mode = "rmii";
+
+				fixed-link {
+					speed = <100>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi b/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi
new file mode 100644
index 000000000000..d865ab5d866b
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi
@@ -0,0 +1,229 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) Protonic Holland
+ * Author: David Jander <david@protonic.nl>
+ */
+/dts-v1/;
+
+#include "stm32mp151.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxad-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		ethernet0 = &ethernet0;
+		mdio-gpio0 = &mdio0;
+		serial0 = &uart4;
+	};
+
+	led-controller-0 {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_INDICATOR;
+			gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+
+	/* DP83TD510E PHYs have max MDC rate of 1.75MHz. Since we can't reduce
+	 * stmmac MDC clock without reducing system bus rate, we need to use
+	 * gpio based MDIO bus.
+	 */
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpios = <&gpioc 1 GPIO_ACTIVE_HIGH
+			 &gpioa 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&dts {
+	status = "okay";
+};
+
+&ethernet0 {
+	pinctrl-0 = <&ethernet0_rmii_pins_a>;
+	pinctrl-1 = <&ethernet0_rmii_sleep_pins_a>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&ethernet0_rmii_pins_a {
+	pins1 {
+		pinmux = <STM32_PINMUX('B', 12, AF11)>, /* ETH1_RMII_TXD0 */
+			 <STM32_PINMUX('B', 13, AF11)>, /* ETH1_RMII_TXD1 */
+			 <STM32_PINMUX('B', 11, AF11)>; /* ETH1_RMII_TX_EN */
+	};
+	pins2 {
+		pinmux = <STM32_PINMUX('C', 4, AF11)>,  /* ETH1_RMII_RXD0 */
+			 <STM32_PINMUX('C', 5, AF11)>,  /* ETH1_RMII_RXD1 */
+			 <STM32_PINMUX('A', 1, AF11)>,  /* ETH1_RMII_REF_CLK input */
+			 <STM32_PINMUX('A', 7, AF11)>;  /* ETH1_RMII_CRS_DV */
+	};
+};
+
+&ethernet0_rmii_sleep_pins_a {
+	pins1 {
+		pinmux = <STM32_PINMUX('B', 12, ANALOG)>, /* ETH1_RMII_TXD0 */
+			 <STM32_PINMUX('B', 13, ANALOG)>, /* ETH1_RMII_TXD1 */
+			 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */
+			 <STM32_PINMUX('C', 4, ANALOG)>,  /* ETH1_RMII_RXD0 */
+			 <STM32_PINMUX('C', 5, ANALOG)>,  /* ETH1_RMII_RXD1 */
+			 <STM32_PINMUX('A', 1, ANALOG)>,  /* ETH1_RMII_REF_CLK */
+			 <STM32_PINMUX('A', 7, ANALOG)>;  /* ETH1_RMII_CRS_DV */
+	};
+};
+
+&iwdg2 {
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>;
+	reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <104000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&qspi_bk1_pins_a {
+	pins1 {
+		bias-pull-up;
+		drive-push-pull;
+		slew-rate = <1>;
+	};
+};
+
+&rng1 {
+	status = "okay";
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	broken-cd;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3v3>;
+	vqmmc-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&sdmmc1_b4_od_pins_a {
+	pins1 {
+		bias-pull-up;
+	};
+	pins2 {
+		bias-pull-up;
+	};
+};
+
+&sdmmc1_b4_pins_a {
+	pins1 {
+		bias-pull-up;
+	};
+	pins2 {
+		bias-pull-up;
+	};
+};
+
+&uart4 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart4_pins_a>;
+	pinctrl-1 = <&uart4_sleep_pins_a>;
+	pinctrl-2 = <&uart4_idle_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&uart4_idle_pins_a {
+	pins1 {
+		pinmux = <STM32_PINMUX('B', 9, ANALOG)>; /* UART4_TX */
+	};
+	pins2 {
+		pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+		bias-pull-up;
+	};
+};
+
+&uart4_pins_a {
+	pins1 {
+		pinmux = <STM32_PINMUX('B', 9, AF8)>; /* UART4_TX */
+		bias-disable;
+		drive-push-pull;
+		slew-rate = <0>;
+	};
+	pins2 {
+		pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+		bias-pull-up;
+	};
+};
+
+&uart4_sleep_pins_a {
+	pins {
+		pinmux = <STM32_PINMUX('B', 9, ANALOG)>, /* UART4_TX */
+			<STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */
+	};
+};
+
+&usbh_ehci {
+	phys = <&usbphyc_port0>;
+	phy-names = "usb";
+	status = "okay";
+};
+
+&usbotg_hs {
+	dr_mode = "host";
+	pinctrl-0 = <&usbotg_hs_pins_a>;
+	pinctrl-names = "default";
+	phys = <&usbphyc_port1 0>;
+	phy-names = "usb2-phy";
+	status = "okay";
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&reg_3v3>;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&reg_3v3>;
+};
diff --git a/arch/arm/boot/dts/stm32mp151a-prtt1s.dts b/arch/arm/boot/dts/stm32mp151a-prtt1s.dts
new file mode 100644
index 000000000000..ad25929e64e6
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp151a-prtt1s.dts
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) Protonic Holland
+ * Author: David Jander <david@protonic.nl>
+ */
+/dts-v1/;
+
+#include "stm32mp151a-prtt1l.dtsi"
+
+/ {
+	model = "Protonic PRTT1S";
+	compatible = "prt,prtt1s", "st,stm32mp151";
+};
+
+&ethernet0 {
+	phy-handle = <&phy0>;
+};
+
+&i2c1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c1_pins_a>;
+	pinctrl-1 = <&i2c1_sleep_pins_a>;
+	clock-frequency = <100000>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+
+	humidity-sensor@40 {
+		compatible = "ti,hdc1080";
+		reg = <0x40>;
+	};
+
+	co2-sensor@62 {
+		compatible = "sensirion,scd41";
+		reg = <0x62>;
+	};
+};
+
+&i2c1_pins_a {
+	pins {
+		pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
+			 <STM32_PINMUX('D', 13, AF5)>; /* I2C1_SDA */
+	};
+};
+
+&i2c1_sleep_pins_a {
+	pins {
+		pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */
+			 <STM32_PINMUX('D', 13, ANALOG)>; /* I2C1_SDA */
+	};
+};
+
+&mdio0 {
+	/* TI DP83TD510E */
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id2000.0181";
+		reg = <0>;
+		interrupts-extended = <&gpioa 4 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpioa 3 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10>;
+		reset-deassert-us = <35>;
+	};
+};
diff --git a/arch/arm/boot/dts/stm32mp153.dtsi b/arch/arm/boot/dts/stm32mp153.dtsi
index 1c1889b194cf..486084e0b80b 100644
--- a/arch/arm/boot/dts/stm32mp153.dtsi
+++ b/arch/arm/boot/dts/stm32mp153.dtsi
@@ -22,6 +22,13 @@
 		interrupt-affinity = <&cpu0>, <&cpu1>;
 	};
 
+	timer {
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
 	soc {
 		m_can1: can@4400e000 {
 			compatible = "bosch,m_can";
diff --git a/arch/arm/boot/dts/stm32mp153c-dhcor-drc-compact.dts b/arch/arm/boot/dts/stm32mp153c-dhcor-drc-compact.dts
new file mode 100644
index 000000000000..c8b9818499ea
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp153c-dhcor-drc-compact.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (C) 2022 Marek Vasut <marex@denx.de>
+ *
+ * DHCOR STM32MP1 variant:
+ * DHCR-STM32MP153C-C065-R051-V33-SPI-I-01LG
+ * DHCOR PCB number: 586-100 or newer
+ * DRC Compact PCB number: 627-100 or newer
+ */
+
+/dts-v1/;
+
+#include "stm32mp153.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15xx-dhcor-som.dtsi"
+#include "stm32mp15xx-dhcor-drc-compact.dtsi"
+
+/ {
+	model = "DH electronics STM32MP153C DHCOR DRC Compact";
+	compatible = "dh,stm32mp153c-dhcor-drc-compact",
+		     "dh,stm32mp153c-dhcor-som",
+		     "st,stm32mp153";
+};
+
+&m_can1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&m_can1_pins_c>;
+	pinctrl-1 = <&m_can1_sleep_pins_c>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts b/arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts
new file mode 100644
index 000000000000..e539cc80bef8
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2022 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+
+#include "stm32mp157a-dk1.dts"
+#include "stm32mp15-scmi.dtsi"
+
+/ {
+	model = "STMicroelectronics STM32MP157A-DK1 SCMI Discovery Board";
+	compatible = "st,stm32mp157a-dk1-scmi", "st,stm32mp157a-dk1", "st,stm32mp157";
+
+	reserved-memory {
+		optee@de000000 {
+			reg = <0xde000000 0x2000000>;
+			no-map;
+		};
+	};
+};
+
+&cpu0 {
+	clocks = <&scmi_clk CK_SCMI_MPU>;
+};
+
+&cpu1 {
+	clocks = <&scmi_clk CK_SCMI_MPU>;
+};
+
+&dsi {
+	clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
+};
+
+&gpioz {
+	clocks = <&scmi_clk CK_SCMI_GPIOZ>;
+};
+
+&hash1 {
+	clocks = <&scmi_clk CK_SCMI_HASH1>;
+	resets = <&scmi_reset RST_SCMI_HASH1>;
+};
+
+&i2c4 {
+	clocks = <&scmi_clk CK_SCMI_I2C4>;
+	resets = <&scmi_reset RST_SCMI_I2C4>;
+};
+
+&iwdg2 {
+	clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>;
+};
+
+&mdma1 {
+	resets = <&scmi_reset RST_SCMI_MDMA>;
+};
+
+&mlahb {
+	resets = <&scmi_reset RST_SCMI_MCU>;
+};
+
+&rcc {
+	compatible = "st,stm32mp1-rcc-secure", "syscon";
+	clock-names = "hse", "hsi", "csi", "lse", "lsi";
+	clocks = <&scmi_clk CK_SCMI_HSE>,
+		 <&scmi_clk CK_SCMI_HSI>,
+		 <&scmi_clk CK_SCMI_CSI>,
+		 <&scmi_clk CK_SCMI_LSE>,
+		 <&scmi_clk CK_SCMI_LSI>;
+};
+
+&rng1 {
+	clocks = <&scmi_clk CK_SCMI_RNG1>;
+	resets = <&scmi_reset RST_SCMI_RNG1>;
+};
+
+&rtc {
+	clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
+};
diff --git a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts
index 2a2829283456..9a2a4bc7d079 100644
--- a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts
+++ b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts
@@ -2,7 +2,7 @@
 /*
  * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
  * Copyright (c) 2020 Engicam srl
- * Copyright (c) 2020 Amarula Solutons(India)
+ * Copyright (c) 2020 Amarula Solutions(India)
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts
index d3058a036c74..60ce4425a7fd 100644
--- a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts
+++ b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts
@@ -2,7 +2,7 @@
 /*
  * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
  * Copyright (c) 2020 Engicam srl
- * Copyright (c) 2020 Amarula Solutons(India)
+ * Copyright (c) 2020 Amarula Solutions(India)
  */
 
 /dts-v1/;
@@ -43,5 +43,7 @@
 	pinctrl-0 = <&uart4_pins_a>;
 	pinctrl-1 = <&uart4_sleep_pins_a>;
 	pinctrl-2 = <&uart4_idle_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts
index a797eaa917b7..390ee8c05754 100644
--- a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts
+++ b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts
@@ -2,7 +2,7 @@
 /*
  * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
  * Copyright (c) 2020 Engicam srl
- * Copyright (c) 2020 Amarula Solutons(India)
+ * Copyright (c) 2020 Amarula Solutions(India)
  */
 
 /dts-v1/;
@@ -128,5 +128,7 @@
 	pinctrl-0 = <&uart4_pins_a>;
 	pinctrl-1 = <&uart4_sleep_pins_a>;
 	pinctrl-2 = <&uart4_idle_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1.dtsi b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1.dtsi
index 01166ccacf2b..9de893101b40 100644
--- a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1.dtsi
+++ b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1.dtsi
@@ -2,7 +2,7 @@
 /*
  * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
  * Copyright (c) 2020 Engicam srl
- * Copyright (c) 2020 Amarula Solutons(India)
+ * Copyright (c) 2020 Amarula Solutions(India)
  */
 
 / {
diff --git a/arch/arm/boot/dts/stm32mp157a-iot-box.dts b/arch/arm/boot/dts/stm32mp157a-iot-box.dts
index 70f394b4d3c0..6a5a4af25bd9 100644
--- a/arch/arm/boot/dts/stm32mp157a-iot-box.dts
+++ b/arch/arm/boot/dts/stm32mp157a-iot-box.dts
@@ -58,6 +58,8 @@
 	/delete-property/st,hw-flow-ctrl;
 	cts-gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
 	rts-gpios = <&gpiob 0 GPIO_ACTIVE_LOW>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 
 	bluetooth {
diff --git a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
index 5670b23812a2..0d7560ba2950 100644
--- a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
+++ b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
@@ -2,7 +2,7 @@
 /*
  * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
  * Copyright (c) 2020 Engicam srl
- * Copyright (c) 2020 Amarula Solutons(India)
+ * Copyright (c) 2020 Amarula Solutions(India)
  */
 
 /dts-v1/;
@@ -143,6 +143,8 @@
 	pinctrl-0 = <&uart4_pins_a>;
 	pinctrl-1 = <&uart4_sleep_pins_a>;
 	pinctrl-2 = <&uart4_idle_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
@@ -150,5 +152,7 @@
 &uart8 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart8_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts
index 7a75868164dc..d949559be020 100644
--- a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts
+++ b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts
@@ -2,7 +2,7 @@
 /*
  * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
  * Copyright (c) 2020 Engicam srl
- * Copyright (c) 2020 Amarula Solutons(India)
+ * Copyright (c) 2020 Amarula Solutions(India)
  */
 
 /dts-v1/;
@@ -44,6 +44,8 @@
 	pinctrl-0 = <&uart4_pins_a>;
 	pinctrl-1 = <&uart4_sleep_pins_a>;
 	pinctrl-2 = <&uart4_idle_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
@@ -51,5 +53,7 @@
 &uart8 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart8_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi
index 0b85175f151e..fb4600a59869 100644
--- a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi
+++ b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi
@@ -2,7 +2,7 @@
 /*
  * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
  * Copyright (c) 2020 Engicam srl
- * Copyright (c) 2020 Amarula Solutons(India)
+ * Copyright (c) 2020 Amarula Solutions(India)
  */
 
 / {
diff --git a/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
index a4b14ef3caee..3a36f7fe0a2c 100644
--- a/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
+++ b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
@@ -288,6 +288,8 @@
 	pinctrl-0 = <&usart2_pins_b>;
 	pinctrl-1 = <&usart2_sleep_pins_b>;
 	st,hw-flow-ctrl;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
@@ -296,6 +298,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart4_pins_c>;
 	st,hw-flow-ctrl;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
@@ -303,6 +307,8 @@
 &uart7 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart7_pins_b>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts b/arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts
new file mode 100644
index 000000000000..97e4f94b0a24
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2022 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+
+#include "stm32mp157c-dk2.dts"
+#include "stm32mp15-scmi.dtsi"
+
+/ {
+	model = "STMicroelectronics STM32MP157C-DK2 SCMI Discovery Board";
+	compatible = "st,stm32mp157c-dk2-scmi", "st,stm32mp157c-dk2", "st,stm32mp157";
+
+	reserved-memory {
+		optee@de000000 {
+			reg = <0xde000000 0x2000000>;
+			no-map;
+		};
+	};
+};
+
+&cpu0 {
+	clocks = <&scmi_clk CK_SCMI_MPU>;
+};
+
+&cpu1 {
+	clocks = <&scmi_clk CK_SCMI_MPU>;
+};
+
+&cryp1 {
+	clocks = <&scmi_clk CK_SCMI_CRYP1>;
+	resets = <&scmi_reset RST_SCMI_CRYP1>;
+};
+
+&dsi {
+	phy-dsi-supply = <&scmi_reg18>;
+	clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
+};
+
+&gpioz {
+	clocks = <&scmi_clk CK_SCMI_GPIOZ>;
+};
+
+&hash1 {
+	clocks = <&scmi_clk CK_SCMI_HASH1>;
+	resets = <&scmi_reset RST_SCMI_HASH1>;
+};
+
+&i2c4 {
+	clocks = <&scmi_clk CK_SCMI_I2C4>;
+	resets = <&scmi_reset RST_SCMI_I2C4>;
+};
+
+&iwdg2 {
+	clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>;
+};
+
+&mdma1 {
+	resets = <&scmi_reset RST_SCMI_MDMA>;
+};
+
+&mlahb {
+	resets = <&scmi_reset RST_SCMI_MCU>;
+};
+
+&rcc {
+	compatible = "st,stm32mp1-rcc-secure", "syscon";
+	clock-names = "hse", "hsi", "csi", "lse", "lsi";
+	clocks = <&scmi_clk CK_SCMI_HSE>,
+		 <&scmi_clk CK_SCMI_HSI>,
+		 <&scmi_clk CK_SCMI_CSI>,
+		 <&scmi_clk CK_SCMI_LSE>,
+		 <&scmi_clk CK_SCMI_LSI>;
+};
+
+&rng1 {
+	clocks = <&scmi_clk CK_SCMI_RNG1>;
+	resets = <&scmi_reset RST_SCMI_RNG1>;
+};
+
+&rtc {
+	clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
+};
diff --git a/arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts b/arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts
new file mode 100644
index 000000000000..9cf0a44d2f47
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2022 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+
+#include "stm32mp157c-ed1.dts"
+#include "stm32mp15-scmi.dtsi"
+
+/ {
+	model = "STMicroelectronics STM32MP157C-ED1 SCMI eval daughter";
+	compatible = "st,stm32mp157c-ed1-scmi", "st,stm32mp157c-ed1", "st,stm32mp157";
+
+	reserved-memory {
+		optee@fe000000 {
+			reg = <0xfe000000 0x2000000>;
+			no-map;
+		};
+	};
+};
+
+&cpu0 {
+	clocks = <&scmi_clk CK_SCMI_MPU>;
+};
+
+&cpu1 {
+	clocks = <&scmi_clk CK_SCMI_MPU>;
+};
+
+&cryp1 {
+	clocks = <&scmi_clk CK_SCMI_CRYP1>;
+	resets = <&scmi_reset RST_SCMI_CRYP1>;
+};
+
+&dsi {
+	clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
+};
+
+&gpioz {
+	clocks = <&scmi_clk CK_SCMI_GPIOZ>;
+};
+
+&hash1 {
+	clocks = <&scmi_clk CK_SCMI_HASH1>;
+	resets = <&scmi_reset RST_SCMI_HASH1>;
+};
+
+&i2c4 {
+	clocks = <&scmi_clk CK_SCMI_I2C4>;
+	resets = <&scmi_reset RST_SCMI_I2C4>;
+};
+
+&iwdg2 {
+	clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>;
+};
+
+&mdma1 {
+	resets = <&scmi_reset RST_SCMI_MDMA>;
+};
+
+&mlahb {
+	resets = <&scmi_reset RST_SCMI_MCU>;
+};
+
+&rcc {
+	compatible = "st,stm32mp1-rcc-secure", "syscon";
+	clock-names = "hse", "hsi", "csi", "lse", "lsi";
+	clocks = <&scmi_clk CK_SCMI_HSE>,
+		 <&scmi_clk CK_SCMI_HSI>,
+		 <&scmi_clk CK_SCMI_CSI>,
+		 <&scmi_clk CK_SCMI_LSE>,
+		 <&scmi_clk CK_SCMI_LSI>;
+};
+
+&rng1 {
+	clocks = <&scmi_clk CK_SCMI_RNG1>;
+	resets = <&scmi_reset RST_SCMI_RNG1>;
+};
+
+&rtc {
+	clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
+};
diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts
index 46b471d09c50..b1eb688a278a 100644
--- a/arch/arm/boot/dts/stm32mp157c-ed1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts
@@ -384,6 +384,8 @@
 	pinctrl-0 = <&uart4_pins_a>;
 	pinctrl-1 = <&uart4_sleep_pins_a>;
 	pinctrl-2 = <&uart4_idle_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/stm32mp157c-emsbc-argon.dts b/arch/arm/boot/dts/stm32mp157c-emsbc-argon.dts
new file mode 100644
index 000000000000..33b3f11d24bb
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-emsbc-argon.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+//
+// Copyright (c) 2021 emtrion GmbH
+// Author: Reinhold Müller <reinhold.mueller@emtrion.de>.
+//
+
+/dts-v1/;
+
+#include "stm32mp157c-emstamp-argon.dtsi"
+
+/ {
+	model = "emtrion STM32MP157C emSBC-Argon Developer Board";
+	compatible = "emtrion,stm32mp157c-emsbc-argon", "emtrion,stm32mp157c-emstamp-argon",
+			"st,stm32mp157";
+
+	led: gpio_leds {
+		compatible = "gpio-leds";
+		led-2 {
+			label = "red";
+			gpios = <&gpiof 12 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+			default-state = "off";
+		};
+		led-3 {
+			label = "green";
+			gpios = <&gpioe 7 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+			default-state = "off";
+		};
+	};
+};
+
+&dac {
+	status = "okay";
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	cd-gpios = <&gpiob 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	disable-wp;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&vdd_sd>;
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi b/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi
new file mode 100644
index 000000000000..30156b7546ed
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi
@@ -0,0 +1,546 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+//
+// Copyright (c) 2021 emtrion GmbH
+// Author: Reinhold Müller <reinhold.mueller@emtrion.de>.
+//
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/st,stpmic1.h>
+
+/ {
+	aliases {
+		ethernet0 = &ethernet0;
+		serial0 = &uart4;
+		serial1 = &usart2;
+		serial2 = &usart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xc0000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mcuram2: mcuram2@10000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10000000 0x40000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@10040000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10040000 0x2000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@10042000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10042000 0x2000>;
+			no-map;
+		};
+
+		vdev0buffer: vdev0buffer@10044000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10044000 0x4000>;
+			no-map;
+		};
+
+		mcuram: mcuram@30000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x30000000 0x40000>;
+			no-map;
+		};
+
+		retram: retram@38000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x38000000 0x10000>;
+			no-map;
+		};
+
+		gpu_reserved: gpu@dc000000 {
+			reg = <0xdc000000 0x4000000>;
+			no-map;
+		};
+	};
+
+	led: gpio_leds {
+		compatible = "gpio-leds";
+		led-0 {
+			label = "panic";
+			gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+			default-state = "off";
+			panic-indicator;
+		};
+		led-1 {
+			label = "heartbeat";
+			gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+	};
+};
+
+&adc {
+	vdd-supply = <&vdd>;
+	vdda-supply = <&vdd>;
+	vref-supply = <&vrefbuf>;
+	status = "okay";
+
+	adc1: adc@0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&adc1_in6_pins_a>;
+		st,min-sample-time-nsecs = <5000>;
+		st,adc-channels = <6>;
+		status = "disabled";
+	};
+
+	adc2: adc@100 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		channel@12 {
+			reg = <12>;
+			label = "sense_temp";
+			st,min-sample-time-ns = <9000>;
+		};
+		channel@15 {
+			reg = <15>;
+			label = "vbat";
+			st,min-sample-time-ns = <9000>;
+		};
+		channel@16 {
+			reg = <16>;
+			label = "dac_out1";
+			st,min-sample-time-ns = <9000>;
+		};
+		channel@17 {
+			reg = <17>;
+			label = "dac_out1";
+			st,min-sample-time-ns = <9000>;
+		};
+	};
+};
+
+&crc1 {
+	status = "okay";
+};
+
+&cryp1 {
+	status = "okay";
+};
+
+&dac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>;
+	vref-supply = <&vdda>;
+	status = "disabled";
+
+	dac1: dac@1 {
+		status = "okay";
+	};
+	dac2: dac@2 {
+		status = "okay";
+	};
+};
+
+&dts {
+	status = "okay";
+};
+
+&ethernet0 {
+	status = "okay";
+	snps,reset-gpio = <&gpioa 1 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 30000 50000>;
+	pinctrl-0 = <&ethernet0_rmii_pins_b>;
+	pinctrl-1 = <&ethernet0_rmii_sleep_pins_b>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rmii";
+	max-speed = <100>;
+	phy-handle = <&phy0>;
+	st,eth-ref-clk-sel;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&gpu {
+	contiguous-area = <&gpu_reserved>;
+};
+
+&hash1 {
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c1_pins_a>;
+	pinctrl-1 = <&i2c1_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <100>;
+	i2c-scl-falling-time-ns = <7>;
+	status = "disabled";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&i2c4 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c4_pins_a>;
+	pinctrl-1 = <&i2c4_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	pmic: stpmic@33 {
+		compatible = "st,stpmic1";
+		reg = <0x33>;
+		interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		status = "okay";
+
+		regulators {
+			compatible = "st,stpmic1-regulators";
+
+			ldo1-supply = <&v3v3>;
+			ldo3-supply = <&vdd_ddr>;
+			ldo6-supply = <&v3v3>;
+			pwr_sw1-supply = <&bst_out>;
+			pwr_sw2-supply = <&bst_out>;
+
+			vddcore: buck1 {
+				regulator-name = "vddcore";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd_ddr: buck2 {
+				regulator-name = "vdd_ddr";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd: buck3 {
+				regulator-name = "vdd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				st,mask-reset;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			v3v3: buck4 {
+				regulator-name = "v3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+				regulator-initial-mode = <0>;
+			};
+
+			v1v8_audio: ldo1 {
+				regulator-name = "v1v8_audio";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO1 0>;
+			};
+
+			v3v3_hdmi: ldo2 {
+				regulator-name = "v3v3_hdmi";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO2 0>;
+			};
+
+			vtt_ddr: ldo3 {
+				regulator-name = "vtt_ddr";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <750000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			vdd_usb: ldo4 {
+				regulator-name = "vdd_usb";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				interrupts = <IT_CURLIM_LDO4 0>;
+			};
+
+			vdd_sd: ldo5 {
+				regulator-name = "vdd_sd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				interrupts = <IT_CURLIM_LDO5 0>;
+				regulator-always-on;
+			};
+
+			vdda: ldo6 {
+				regulator-name = "vdda";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO6 0>;
+				regulator-boot-on;
+			};
+
+			vref_ddr: vref_ddr {
+				regulator-name = "vref_ddr";
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			bst_out: boost {
+				regulator-name = "bst_out";
+				interrupts = <IT_OCP_BOOST 0>;
+			};
+
+			vbus_otg: pwr_sw1 {
+				regulator-name = "vbus_otg";
+				interrupts = <IT_OCP_OTG 0>;
+				regulator-active-discharge;
+			};
+
+			vbus_usbh: pwr_sw2 {
+				regulator-name = "usbh_vbus";
+				interrupts = <IT_OCP_SWOUT 0>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+
+		onkey {
+			compatible = "st,stpmic1-onkey";
+			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>;
+			interrupt-names = "onkey-falling", "onkey-rising";
+			status = "okay";
+		};
+
+		watchdog {
+			compatible = "st,stpmic1-wdt";
+			status = "disabled";
+		};
+	};
+};
+
+&i2c5 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c5_pins_a>;
+	pinctrl-1 = <&i2c5_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&ipcc {
+	status = "okay";
+};
+
+&iwdg2 {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&m4_rproc {
+	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
+			<&vdev0vring1>, <&vdev0buffer>;
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
+	mbox-names = "vq0", "vq1", "shutdown";
+	interrupt-parent = <&exti>;
+	interrupts = <68 1>;
+	interrupt-names = "wdg";
+	recovery;
+	status = "okay";
+};
+
+&pwr_regulators {
+	vdd-supply = <&vdd>;
+	vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&qspi {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>;
+	reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <133000000>;
+		spi-rx-bus-width = <1>;
+		spi-tx-bus-width = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&rng1 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sdmmc2 {
+	arm,primecell-periphid = <0x10153180>;
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_b>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_b>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a>;
+	non-removable;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins_a>;
+	cs-gpios = <&gpioz 3 0>;
+	status = "disabled";
+};
+
+&timers1 {
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	pwm {
+		pinctrl-0 = <&pwm1_pins_b>;
+		pinctrl-1 = <&pwm1_sleep_pins_b>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@0 {
+		status = "okay";
+	};
+};
+
+&timers4 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	pwm {
+		pinctrl-0 = <&pwm4_pins_b>;
+		pinctrl-1 = <&pwm4_sleep_pins_b>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@3 {
+		status = "okay";
+	};
+};
+
+&timers5 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	pwm {
+		pinctrl-0 = <&pwm5_pins_a>;
+		pinctrl-1 = <&pwm5_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@4 {
+		status = "okay";
+	};
+};
+
+&uart4 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart4_pins_a>;
+	pinctrl-1 = <&uart4_sleep_pins_a>;
+	pinctrl-2 = <&uart4_idle_pins_a>;
+	status = "okay";
+};
+
+&usart2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&usart2_pins_a>;
+	pinctrl-1 = <&usart2_sleep_pins_a>;
+	status = "okay";
+};
+
+&usart3 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&usart3_pins_d>;
+	pinctrl-1 = <&usart3_sleep_pins_d>;
+	pinctrl-2 = <&usart3_idle_pins_d>;
+	status = "okay";
+};
+
+&usbh_ehci {
+	phys = <&usbphyc_port0>;
+	phy-names = "usb";
+	status = "okay";
+};
+
+&usbh_ohci {
+	phys = <&usbphyc_port0>;
+	phy-names = "usb";
+	status = "okay";
+};
+
+&usbotg_hs {
+	dr_mode = "peripheral";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usbotg_hs_pins_a>;
+	phy-names = "usb2-phy";
+	phys = <&usbphyc_port1 0>;
+	vbus-supply = <&vbus_otg>;
+	status = "okay";
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+};
+
+&vrefbuf {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	vdda-supply = <&vdd>;
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts b/arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts
new file mode 100644
index 000000000000..3b9dd6f4ccc9
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2022 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+
+#include "stm32mp157c-ev1.dts"
+#include "stm32mp15-scmi.dtsi"
+
+/ {
+	model = "STMicroelectronics STM32MP157C-EV1 SCMI eval daughter on eval mother";
+	compatible = "st,stm32mp157c-ev1-scmi", "st,stm32mp157c-ev1", "st,stm32mp157c-ed1",
+		     "st,stm32mp157";
+
+	reserved-memory {
+		optee@fe000000 {
+			reg = <0xfe000000 0x2000000>;
+			no-map;
+		};
+	};
+};
+
+&cpu0 {
+	clocks = <&scmi_clk CK_SCMI_MPU>;
+};
+
+&cpu1 {
+	clocks = <&scmi_clk CK_SCMI_MPU>;
+};
+
+&cryp1 {
+	clocks = <&scmi_clk CK_SCMI_CRYP1>;
+	resets = <&scmi_reset RST_SCMI_CRYP1>;
+};
+
+&dsi {
+	phy-dsi-supply = <&scmi_reg18>;
+	clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
+};
+
+&gpioz {
+	clocks = <&scmi_clk CK_SCMI_GPIOZ>;
+};
+
+&hash1 {
+	clocks = <&scmi_clk CK_SCMI_HASH1>;
+	resets = <&scmi_reset RST_SCMI_HASH1>;
+};
+
+&i2c4 {
+	clocks = <&scmi_clk CK_SCMI_I2C4>;
+	resets = <&scmi_reset RST_SCMI_I2C4>;
+};
+
+&iwdg2 {
+	clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>;
+};
+
+&m_can1 {
+	clocks = <&scmi_clk CK_SCMI_HSE>, <&rcc FDCAN_K>;
+};
+
+&mdma1 {
+	resets = <&scmi_reset RST_SCMI_MDMA>;
+};
+
+&mlahb {
+	resets = <&scmi_reset RST_SCMI_MCU>;
+};
+
+&rcc {
+	compatible = "st,stm32mp1-rcc-secure", "syscon";
+	clock-names = "hse", "hsi", "csi", "lse", "lsi";
+	clocks = <&scmi_clk CK_SCMI_HSE>,
+		 <&scmi_clk CK_SCMI_HSI>,
+		 <&scmi_clk CK_SCMI_CSI>,
+		 <&scmi_clk CK_SCMI_LSE>,
+		 <&scmi_clk CK_SCMI_LSI>;
+};
+
+&rng1 {
+	clocks = <&scmi_clk CK_SCMI_RNG1>;
+	resets = <&scmi_reset RST_SCMI_RNG1>;
+};
+
+&rtc {
+	clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
+};
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index e222d2d2cb44..050c3c27a420 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -255,14 +255,22 @@
 
 &qspi {
 	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>;
-	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a &qspi_bk2_sleep_pins_a>;
+	pinctrl-0 = <&qspi_clk_pins_a
+		     &qspi_bk1_pins_a
+		     &qspi_cs1_pins_a
+		     &qspi_bk2_pins_a
+		     &qspi_cs2_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a
+		     &qspi_bk1_sleep_pins_a
+		     &qspi_cs1_sleep_pins_a
+		     &qspi_bk2_sleep_pins_a
+		     &qspi_cs2_sleep_pins_a>;
 	reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
 	#address-cells = <1>;
 	#size-cells = <0>;
 	status = "okay";
 
-	flash0: mx66l51235l@0 {
+	flash0: flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-rx-bus-width = <4>;
@@ -271,7 +279,7 @@
 		#size-cells = <1>;
 	};
 
-	flash1: mx66l51235l@1 {
+	flash1: flash@1 {
 		compatible = "jedec,spi-nor";
 		reg = <1>;
 		spi-rx-bus-width = <4>;
diff --git a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
index 1e9bf7eea0f1..e8d2ec41d537 100644
--- a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
@@ -248,5 +248,7 @@
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart4_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey.dts b/arch/arm/boot/dts/stm32mp157c-odyssey.dts
index 554f5d3bcdc3..ed66d25b8bf3 100644
--- a/arch/arm/boot/dts/stm32mp157c-odyssey.dts
+++ b/arch/arm/boot/dts/stm32mp157c-odyssey.dts
@@ -81,6 +81,8 @@
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart4_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi
index 4b10b013ffd5..35b1034aa3cf 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi
@@ -131,6 +131,8 @@
 &usart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usart3_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
@@ -144,6 +146,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart8_pins_a>;
 	rts-gpios = <&gpioe 6 GPIO_ACTIVE_HIGH>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
index fbf3826933e4..5f586f024060 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
@@ -287,6 +287,8 @@
 &usart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usart3_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
@@ -294,6 +296,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart8_pins_a &uart8_rtscts_pins_a>;
 	uart-has-rtscts;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi
index ba816ef8b9b2..abc595350e71 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi
@@ -105,12 +105,16 @@
 &usart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usart3_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
 &uart8 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart8_pins_a &uart8_rtscts_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
index 8c41f819f776..238a611192e7 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
@@ -118,13 +118,12 @@
 
 &ethernet0 {
 	status = "okay";
-	pinctrl-0 = <&ethernet0_rmii_pins_a>;
-	pinctrl-1 = <&ethernet0_rmii_sleep_pins_a>;
+	pinctrl-0 = <&ethernet0_rmii_pins_c &mco2_pins_a>;
+	pinctrl-1 = <&ethernet0_rmii_sleep_pins_c &mco2_sleep_pins_a>;
 	pinctrl-names = "default", "sleep";
 	phy-mode = "rmii";
 	max-speed = <100>;
 	phy-handle = <&phy0>;
-	st,eth-ref-clk-sel;
 
 	mdio0 {
 		#address-cells = <1>;
@@ -136,7 +135,7 @@
 			/* LAN8710Ai */
 			compatible = "ethernet-phy-id0007.c0f0",
 				     "ethernet-phy-ieee802.3-c22";
-			clocks = <&rcc ETHCK_K>;
+			clocks = <&rcc CK_MCO2>;
 			reset-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <500>;
 			reset-deassert-us = <500>;
@@ -196,7 +195,6 @@
 			  "", "", "DHCOM-E", "",
 			  "", "", "", "",
 			  "", "", "", "";
-	status = "okay";
 };
 
 &gpiod {
@@ -447,6 +445,21 @@
 	};
 };
 
+&rcc {
+	/* Connect MCO2 output to ETH_RX_CLK input via pad-pad connection */
+	clocks = <&rcc CK_MCO2>;
+	clock-names = "ETH_RX_CLK/ETH_REF_CLK";
+
+	/*
+	 * Set PLL4P output to 100 MHz to supply SDMMC with faster clock,
+	 * set MCO2 output to 50 MHz to supply ETHRX clock with PLL4P/2,
+	 * so that MCO2 behaves as a divider for the ETHRX clock here.
+	 */
+	assigned-clocks = <&rcc CK_MCO2>, <&rcc PLL4_P>;
+	assigned-clock-parents = <&rcc PLL4_P>;
+	assigned-clock-rates = <50000000>, <100000000>;
+};
+
 &rng1 {
 	status = "okay";
 };
@@ -521,5 +534,7 @@
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart4_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
index 6885948f3024..90933077d66d 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
@@ -126,6 +126,22 @@
 	};
 };
 
+&dcmi {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&dcmi_pins_c>;
+	pinctrl-1 = <&dcmi_sleep_pins_c>;
+	status = "disabled";
+
+	port {
+		dcmi_0: endpoint {
+			remote-endpoint = <&stmipi_2>;
+			bus-type = <5>;
+			bus-width = <8>;
+			pclk-sample = <0>;
+		};
+	};
+};
+
 &ethernet0 {
 	status = "okay";
 	pinctrl-0 = <&ethernet0_rgmii_pins_c>;
@@ -141,6 +157,7 @@
 		compatible = "snps,dwmac-mdio";
 		reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>;
 		reset-delay-us = <1000>;
+		reset-post-delay-us = <1000>;
 
 		phy0: ethernet-phy@7 {
 			reg = <7>;
@@ -218,6 +235,45 @@
 };
 
 &i2c4 {
+	stmipi: stmipi@14 {
+		compatible = "st,st-mipid02";
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&mco1_pins_a>;
+		pinctrl-1 = <&mco1_sleep_pins_a>;
+		reg = <0x14>;
+		clocks = <&rcc CK_MCO1>;
+		clock-names = "xclk";
+		assigned-clocks = <&rcc CK_MCO1>;
+		assigned-clock-parents = <&rcc CK_HSE>;
+		assigned-clock-rates = <24000000>;
+		VDDE-supply = <&v1v8>;
+		VDDIN-supply = <&v1v8>;
+		reset-gpios = <&gpioz 0 GPIO_ACTIVE_LOW>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				stmipi_0: endpoint {
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				stmipi_2: endpoint {
+					bus-width = <8>;
+					hsync-active = <0>;
+					vsync-active = <0>;
+					pclk-sample = <0>;
+					remote-endpoint = <&dcmi_0>;
+				};
+			};
+		};
+	};
+
 	hdmi-transmitter@3d {
 		compatible = "adi,adv7513";
 		reg = <0x3d>, <0x4d>, <0x2d>, <0x5d>;
@@ -376,6 +432,8 @@
 	label = "LS-UART1";
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart4_pins_b>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
@@ -385,6 +443,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart7_pins_a>;
 	uart-has-rtscts;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
@@ -394,6 +454,8 @@
 	pinctrl-0 = <&usart2_pins_a>;
 	pinctrl-1 = <&usart2_sleep_pins_a>;
 	st,hw-flow-ctrl;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 
 	bluetooth {
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi
new file mode 100644
index 000000000000..27477bb219de
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi
@@ -0,0 +1,322 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (C) 2022 Marek Vasut <marex@denx.de>
+ */
+
+/ {
+	aliases {
+		ethernet0 = &ethernet0;
+		ethernet1 = &ksz8851;
+		mmc0 = &sdmmc1;
+		rtc0 = &hwrtc;
+		rtc1 = &rtc;
+		serial0 = &uart4;
+		serial1 = &uart8;
+		serial2 = &usart3;
+		serial3 = &uart5;
+		spi0 = &qspi;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	led {
+		compatible = "gpio-leds";
+		led1 {
+			label = "yellow:user0";
+			gpios = <&gpioz 6 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led2 {
+			label = "red:user1";
+			gpios = <&gpioz 3 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	ethernet_vio: vioregulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vio";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpioh 2 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd>;
+	};
+};
+
+&adc {	/* X11 ADC inputs */
+	pinctrl-names = "default";
+	pinctrl-0 = <&adc12_ain_pins_b>;
+	vdd-supply = <&vdd>;
+	vdda-supply = <&vdda>;
+	vref-supply = <&vdda>;
+	status = "okay";
+
+	adc1: adc@0 {
+		st,adc-channels = <0 1 6>;
+		st,min-sample-time-nsecs = <5000>;
+		status = "okay";
+	};
+
+	adc2: adc@100 {
+		st,adc-channels = <0 1 2>;
+		st,min-sample-time-nsecs = <5000>;
+		status = "okay";
+	};
+};
+
+&ethernet0 {
+	status = "okay";
+	pinctrl-0 = <&ethernet0_rgmii_pins_c>;
+	pinctrl-1 = <&ethernet0_rgmii_sleep_pins_c>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rgmii";
+	max-speed = <1000>;
+	phy-handle = <&phy0>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>;
+		reset-delay-us = <1000>;
+		reset-post-delay-us = <1000>;
+
+		phy0: ethernet-phy@7 {
+			reg = <7>;
+
+			rxc-skew-ps = <1500>;
+			rxdv-skew-ps = <540>;
+			rxd0-skew-ps = <420>;
+			rxd1-skew-ps = <420>;
+			rxd2-skew-ps = <420>;
+			rxd3-skew-ps = <420>;
+
+			txc-skew-ps = <1440>;
+			txen-skew-ps = <540>;
+			txd0-skew-ps = <420>;
+			txd1-skew-ps = <420>;
+			txd2-skew-ps = <420>;
+			txd3-skew-ps = <420>;
+		};
+	};
+};
+
+&fmc {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&fmc_pins_b>;
+	pinctrl-1 = <&fmc_sleep_pins_b>;
+	status = "okay";
+
+	ksz8851: ethernet@1,0 {
+		compatible = "micrel,ks8851-mll";
+		reg = <1 0x0 0x2>, <1 0x2 0x20000>;
+		interrupt-parent = <&gpioc>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		bank-width = <2>;
+
+		/* Timing values are in nS */
+		st,fmc2-ebi-cs-mux-enable;
+		st,fmc2-ebi-cs-transaction-type = <4>;
+		st,fmc2-ebi-cs-buswidth = <16>;
+		st,fmc2-ebi-cs-address-setup-ns = <5>;
+		st,fmc2-ebi-cs-address-hold-ns = <5>;
+		st,fmc2-ebi-cs-bus-turnaround-ns = <5>;
+		st,fmc2-ebi-cs-data-setup-ns = <45>;
+		st,fmc2-ebi-cs-data-hold-ns = <1>;
+		st,fmc2-ebi-cs-write-address-setup-ns = <5>;
+		st,fmc2-ebi-cs-write-address-hold-ns = <5>;
+		st,fmc2-ebi-cs-write-bus-turnaround-ns = <5>;
+		st,fmc2-ebi-cs-write-data-setup-ns = <45>;
+		st,fmc2-ebi-cs-write-data-hold-ns = <1>;
+	};
+};
+
+&gpioa {
+	gpio-line-names = "", "", "", "",
+			  "DRCC-VAR2", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpioe {
+	gpio-line-names = "", "", "", "",
+			  "", "DRCC-GPIO0", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpiog {
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "DRCC-GPIO5", "", "", "";
+};
+
+&gpioh {
+	gpio-line-names = "", "", "", "DRCC-HW2",
+			  "DRCC-GPIO4", "", "", "",
+			  "DRCC-HW1", "DRCC-HW0", "", "DRCC-VAR1",
+			  "DRCC-VAR0", "", "", "DRCC-GPIO6";
+};
+
+&gpioi {
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "DRCC-GPIO2",
+			  "", "DRCC-GPIO1", "", "",
+			  "", "", "", "";
+};
+
+&i2c1 {	/* X11 I2C1 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_b>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&i2c4 {
+	hwrtc: rtc@32 {
+		compatible = "microcrystal,rv8803";
+		reg = <0x32>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&sdmmc1 {	/* MicroSD */
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	cd-gpios = <&gpioi 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	disable-wp;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&vdd>;
+	vqmmc-supply = <&vdd>;
+	status = "okay";
+};
+
+&sdmmc2 {	/* eMMC */
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_c>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_c>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_c>;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	st,neg-edge;
+	vmmc-supply = <&v3v3>;
+	vqmmc-supply = <&vdd>;
+	status = "okay";
+};
+
+&sdmmc3 {	/* SDIO Wi-Fi */
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc3_b4_pins_a>;
+	pinctrl-1 = <&sdmmc3_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>;
+	broken-cd;
+	bus-width = <4>;
+	mmc-ddr-3_3v;
+	st,neg-edge;
+	vmmc-supply = <&v3v3>;
+	vqmmc-supply = <&v3v3>;
+	status = "okay";
+};
+
+&spi2 {	/* X11 SPI */
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_b>;
+	cs-gpios = <&gpioi 0 0>;
+	status = "disabled";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&uart4 {
+	label = "UART0";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins_d>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&uart5 {	/* X11 UART */
+	label = "X11-UART5";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart5_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&uart8 {
+	label = "RS485-1";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart8_pins_a &uart8_rtscts_pins_a>;
+	uart-has-rtscts;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&usart3 {	/* RS485 or RS232 */
+	label = "RS485-2";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&usart3_pins_e>;
+	pinctrl-1 = <&usart3_sleep_pins_e>;
+	uart-has-rtscts;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&usbh_ehci {
+	phys = <&usbphyc_port0>;
+	status = "okay";
+};
+
+&usbh_ohci {
+	phys = <&usbphyc_port0>;
+	status = "okay";
+};
+
+&usbotg_hs {
+	dr_mode = "otg";
+	pinctrl-0 = <&usbotg_hs_pins_a>;
+	pinctrl-names = "default";
+	phy-names = "usb2-phy";
+	phys = <&usbphyc_port1 0>;
+	vbus-supply = <&vbus_otg>;
+	status = "okay";
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+	connector {
+		compatible = "usb-a-connector";
+		vbus-supply = <&vbus_sw>;
+	};
+};
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-io1v8.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-io1v8.dtsi
index 75172314d7af..9937b28548c2 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcor-io1v8.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-io1v8.dtsi
@@ -18,6 +18,11 @@
 	};
 };
 
+&vdd {
+	regulator-min-microvolt = <2900000>;
+	regulator-max-microvolt = <2900000>;
+};
+
 &pwr_regulators {
 	vdd-supply = <&vdd_io>;
 };
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
index 44ecc4708587..134a798ad3f2 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
@@ -19,6 +19,48 @@
 		device_type = "memory";
 		reg = <0xc0000000 0x40000000>;
 	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mcuram2: mcuram2@10000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10000000 0x40000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@10040000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10040000 0x1000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@10041000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10041000 0x1000>;
+			no-map;
+		};
+
+		vdev0buffer: vdev0buffer@10042000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10042000 0x4000>;
+			no-map;
+		};
+
+		mcuram: mcuram@30000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x30000000 0x40000>;
+			no-map;
+		};
+
+		retram: retram@38000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x38000000 0x10000>;
+			no-map;
+		};
+	};
 };
 
 &crc1 {
@@ -77,8 +119,8 @@
 
 			vdd: buck3 {
 				regulator-name = "vdd";
-				regulator-min-microvolt = <2900000>;
-				regulator-max-microvolt = <2900000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
 				regulator-initial-mode = <0>;
 				regulator-over-current-protection;
@@ -179,11 +221,25 @@
 	};
 };
 
+&ipcc {
+	status = "okay";
+};
+
 &iwdg2 {
 	timeout-sec = <32>;
 	status = "okay";
 };
 
+&m4_rproc {
+	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
+			<&vdev0vring1>, <&vdev0buffer>;
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
+	mbox-names = "vq0", "vq1", "shutdown";
+	interrupt-parent = <&exti>;
+	interrupts = <68 1>;
+	status = "okay";
+};
+
 &pwr_regulators {
 	vdd-supply = <&vdd>;
 	vdd_3v3_usbfs-supply = <&vdd_usb>;
diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
index 6caeb448c190..8b48d3c89a04 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
@@ -650,6 +650,8 @@
 	pinctrl-0 = <&uart4_pins_a>;
 	pinctrl-1 = <&uart4_sleep_pins_a>;
 	pinctrl-2 = <&uart4_idle_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
@@ -658,6 +660,8 @@
 	pinctrl-0 = <&uart7_pins_c>;
 	pinctrl-1 = <&uart7_sleep_pins_c>;
 	pinctrl-2 = <&uart7_idle_pins_c>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "disabled";
 };
 
@@ -673,6 +677,14 @@
 &usbh_ehci {
 	phys = <&usbphyc_port0>;
 	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	/* onboard HUB */
+	hub@1 {
+		compatible = "usb424,2514";
+		reg = <1>;
+		vdd-supply = <&v3v3>;
+	};
 };
 
 &usbotg_hs {
diff --git a/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi b/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi
index 6706d8311a66..935b7084b5a2 100644
--- a/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi
@@ -50,12 +50,6 @@
 			no-map;
 		};
 	};
-
-	reg_sip_eeprom: regulator_eeprom {
-		compatible = "regulator-fixed";
-		regulator-name = "sip_eeprom";
-		regulator-always-on;
-	};
 };
 
 &i2c4 {
@@ -78,6 +72,7 @@
 			compatible = "st,stpmic1-regulators";
 
 			ldo1-supply = <&v3v3>;
+			ldo3-supply = <&vdd_ddr>;
 			ldo6-supply = <&v3v3>;
 			pwr_sw1-supply = <&bst_out>;
 
@@ -203,7 +198,7 @@
 
 	sip_eeprom: eeprom@50 {
 		compatible = "atmel,24c32";
-		vcc-supply = <&reg_sip_eeprom>;
+		vcc-supply = <&vdd>;
 		reg = <0x50>;
 	};
 };
diff --git a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
index 0a562b2cc5bc..62e7aa587f89 100644
--- a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
+++ b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
@@ -63,7 +63,7 @@
 		compatible = "gpio-keys-polled";
 		poll-interval = <20>;
 
-		left-joystick-left {
+		event-left-joystick-left {
 			label = "Left Joystick Left";
 			linux,code = <ABS_X>;
 			linux,input-type = <EV_ABS>;
@@ -71,7 +71,7 @@
 			gpios = <&pio 0 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA6 */
 		};
 
-		left-joystick-right {
+		event-left-joystick-right {
 			label = "Left Joystick Right";
 			linux,code = <ABS_X>;
 			linux,input-type = <EV_ABS>;
@@ -79,7 +79,7 @@
 			gpios = <&pio 0 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA5 */
 		};
 
-		left-joystick-up {
+		event-left-joystick-up {
 			label = "Left Joystick Up";
 			linux,code = <ABS_Y>;
 			linux,input-type = <EV_ABS>;
@@ -87,7 +87,7 @@
 			gpios = <&pio 0 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA8 */
 		};
 
-		left-joystick-down {
+		event-left-joystick-down {
 			label = "Left Joystick Down";
 			linux,code = <ABS_Y>;
 			linux,input-type = <EV_ABS>;
@@ -95,7 +95,7 @@
 			gpios = <&pio 0 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA9 */
 		};
 
-		right-joystick-left {
+		event-right-joystick-left {
 			label = "Right Joystick Left";
 			linux,code = <ABS_Z>;
 			linux,input-type = <EV_ABS>;
@@ -103,7 +103,7 @@
 			gpios = <&pio 0 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA1 */
 		};
 
-		right-joystick-right {
+		event-right-joystick-right {
 			label = "Right Joystick Right";
 			linux,code = <ABS_Z>;
 			linux,input-type = <EV_ABS>;
@@ -111,7 +111,7 @@
 			gpios = <&pio 0 0 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA0 */
 		};
 
-		right-joystick-up {
+		event-right-joystick-up {
 			label = "Right Joystick Up";
 			linux,code = <ABS_RZ>;
 			linux,input-type = <EV_ABS>;
@@ -119,7 +119,7 @@
 			gpios = <&pio 0 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA3 */
 		};
 
-		right-joystick-down {
+		event-right-joystick-down {
 			label = "Right Joystick Down";
 			linux,code = <ABS_RZ>;
 			linux,input-type = <EV_ABS>;
@@ -127,7 +127,7 @@
 			gpios = <&pio 0 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA4 */
 		};
 
-		dpad-left {
+		event-dpad-left {
 			label = "DPad Left";
 			linux,code = <ABS_HAT0X>;
 			linux,input-type = <EV_ABS>;
@@ -135,7 +135,7 @@
 			gpios = <&pio 7 23 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH23 */
 		};
 
-		dpad-right {
+		event-dpad-right {
 			label = "DPad Right";
 			linux,code = <ABS_HAT0X>;
 			linux,input-type = <EV_ABS>;
@@ -143,7 +143,7 @@
 			gpios = <&pio 7 24 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH24 */
 		};
 
-		dpad-up {
+		event-dpad-up {
 			label = "DPad Up";
 			linux,code = <ABS_HAT0Y>;
 			linux,input-type = <EV_ABS>;
@@ -151,7 +151,7 @@
 			gpios = <&pio 7 25 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH25 */
 		};
 
-		dpad-down {
+		event-dpad-down {
 			label = "DPad Down";
 			linux,code = <ABS_HAT0Y>;
 			linux,input-type = <EV_ABS>;
@@ -159,49 +159,49 @@
 			gpios = <&pio 7 26 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH26 */
 		};
 
-		x {
+		event-x {
 			label = "Button X";
 			linux,code = <BTN_X>;
 			gpios = <&pio 0 16 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA16 */
 		};
 
-		y {
+		event-y {
 			label = "Button Y";
 			linux,code = <BTN_Y>;
 			gpios = <&pio 0 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA14 */
 		};
 
-		a {
+		event-a {
 			label = "Button A";
 			linux,code = <BTN_A>;
 			gpios = <&pio 0 17 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA17 */
 		};
 
-		b {
+		event-b {
 			label = "Button B";
 			linux,code = <BTN_B>;
 			gpios = <&pio 0 15 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA15 */
 		};
 
-		select {
+		event-select {
 			label = "Select Button";
 			linux,code = <BTN_SELECT>;
 			gpios = <&pio 0 11 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA11 */
 		};
 
-		start {
+		event-start {
 			label = "Start Button";
 			linux,code = <BTN_START>;
 			gpios = <&pio 0 12 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA12 */
 		};
 
-		top-left {
+		event-top-left {
 			label = "Top Left Button";
 			linux,code = <BTN_TL>;
 			gpios = <&pio 7 22 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH22 */
 		};
 
-		top-right {
+		event-top-right {
 			label = "Top Right Button";
 			linux,code = <BTN_TR>;
 			gpios = <&pio 0 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA13 */
diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
index 1ac82376baef..a332d61fd561 100644
--- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts
+++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
@@ -77,19 +77,19 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		back {
+		key-back {
 			label = "Key Back";
 			linux,code = <KEY_BACK>;
 			gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;
 		};
 
-		home {
+		key-home {
 			label = "Key Home";
 			linux,code = <KEY_HOME>;
 			gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;
 		};
 
-		menu {
+		key-menu {
 			label = "Key Menu";
 			linux,code = <KEY_MENU>;
 			gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts b/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts
index 2ce361f8fede..3a6c4bd0a44f 100644
--- a/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts
+++ b/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts
@@ -67,18 +67,18 @@
 		compatible = "gpio-leds";
 
 		led-0 {
-			label ="licheepi:red:usr";
+			label = "licheepi:red:usr";
 			gpios = <&pio 2 5 GPIO_ACTIVE_LOW>;
 		};
 
 		led-1 {
-			label ="licheepi:green:usr";
+			label = "licheepi:green:usr";
 			gpios = <&pio 2 19 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
 
 		led-2 {
-			label ="licheepi:blue:usr";
+			label = "licheepi:blue:usr";
 			gpios = <&pio 2 4 GPIO_ACTIVE_LOW>;
 		};
 
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 715d74854449..6cdadba6a3ac 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -46,6 +46,7 @@
 #include <dt-bindings/thermal/thermal.h>
 
 #include <dt-bindings/clock/sun6i-a31-ccu.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
 #include <dt-bindings/reset/sun6i-a31-ccu.h>
 
 / {
@@ -598,7 +599,7 @@
 		ccu: clock@1c20000 {
 			compatible = "allwinner,sun6i-a31-ccu";
 			reg = <0x01c20000 0x400>;
-			clocks = <&osc24M>, <&rtc 0>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
 			clock-names = "hosc", "losc";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -612,7 +613,8 @@
 				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_APB1_PIO>, <&osc24M>, <&rtc 0>;
+			clocks = <&ccu CLK_APB1_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
@@ -1319,7 +1321,7 @@
 			ar100: ar100_clk {
 				compatible = "allwinner,sun6i-a31-ar100-clk";
 				#clock-cells = <0>;
-				clocks = <&rtc 0>, <&osc24M>,
+				clocks = <&rtc CLK_OSC32K>, <&osc24M>,
 					 <&ccu CLK_PLL_PERIPH>,
 					 <&ccu CLK_PLL_PERIPH>;
 				clock-output-names = "ar100";
@@ -1354,7 +1356,7 @@
 			ir_clk: ir_clk {
 				#clock-cells = <0>;
 				compatible = "allwinner,sun4i-a10-mod0-clk";
-				clocks = <&rtc 0>, <&osc24M>;
+				clocks = <&rtc CLK_OSC32K>, <&osc24M>;
 				clock-output-names = "ir";
 			};
 
@@ -1385,9 +1387,8 @@
 			interrupt-parent = <&r_intc>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb0_gates 0>, <&osc24M>, <&rtc 0>;
+			clocks = <&apb0_gates 0>, <&osc24M>, <&rtc CLK_OSC32K>;
 			clock-names = "apb", "hosc", "losc";
-			resets = <&apb0_rst 0>;
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
diff --git a/arch/arm/boot/dts/sun7i-a20-haoyu-marsboard.dts b/arch/arm/boot/dts/sun7i-a20-haoyu-marsboard.dts
new file mode 100644
index 000000000000..097e479c2772
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-haoyu-marsboard.dts
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 Conley Lee
+ * Conley Lee <conleylee@foxmail.com>
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "HAOYU Electronics Marsboard A20";
+	compatible = "haoyu,a20-marsboard", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>, <&gmac_txerr>;
+	phy-handle = <&phy0>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	gmac_txerr: gmac-txerr-pin {
+		pins = "PA17";
+		function = "gmac";
+	};
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
index 4f8d55d3ba79..928b86a95f34 100644
--- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
+++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
@@ -78,19 +78,19 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		back {
+		key-back {
 			label = "Key Back";
 			linux,code = <KEY_BACK>;
 			gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;
 		};
 
-		home {
+		key-home {
 			label = "Key Home";
 			linux,code = <KEY_HOME>;
 			gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;
 		};
 
-		menu {
+		key-menu {
 			label = "Key Menu";
 			linux,code = <KEY_MENU>;
 			gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
index 4461d5098b20..f630ab55bb6a 100644
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@@ -44,6 +44,7 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
+#include <dt-bindings/clock/sun6i-rtc.h>
 #include <dt-bindings/clock/sun8i-a23-a33-ccu.h>
 #include <dt-bindings/reset/sun8i-a23-a33-ccu.h>
 
@@ -329,7 +330,7 @@
 
 		ccu: clock@1c20000 {
 			reg = <0x01c20000 0x400>;
-			clocks = <&osc24M>, <&rtc 0>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
 			clock-names = "hosc", "losc";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -340,7 +341,8 @@
 			reg = <0x01c20800 0x400>;
 			interrupt-parent = <&r_intc>;
 			/* interrupts get set in SoC specific dtsi file */
-			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
@@ -810,9 +812,8 @@
 			reg = <0x01f02c00 0x400>;
 			interrupt-parent = <&r_intc>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb0_gates 0>, <&osc24M>, <&rtc 0>;
+			clocks = <&apb0_gates 0>, <&osc24M>, <&rtc CLK_OSC32K>;
 			clock-names = "apb", "hosc", "losc";
-			resets = <&apb0_rst 0>;
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
index d5c7b7984d85..d729b7c705db 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
+++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
@@ -47,10 +47,10 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		sw4 {
+		switch-4 {
 			label = "power";
 			linux,code = <KEY_POWER>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
@@ -106,7 +106,7 @@
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";
 	};
 };
@@ -181,7 +181,7 @@
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
 		max-speed = <1500000>;
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "lpo";
 		vbat-supply = <&reg_vcc3v3>;
 		vddio-supply = <&reg_vcc3v3>;
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
index f19ed981da9d..3706216ffb40 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
+++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
@@ -169,7 +169,7 @@
 	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "mxicy,mx25l1606e", "winbond,w25q128";
+		compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <40000000>;
 	};
diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
index cd9f655e4f92..27a0d51289dd 100644
--- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
@@ -93,10 +93,10 @@
 		};
 	};
 
-	r-gpio-keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "power";
 			linux,code = <KEY_POWER>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
@@ -125,7 +125,7 @@
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";
 	};
 };
diff --git a/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts b/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts
index ff0a7a952e0c..f5c8ccc5b872 100644
--- a/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts
+++ b/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts
@@ -39,16 +39,16 @@
 		};
 	};
 
-	r_gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "power";
 			linux,code = <KEY_POWER>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; /* PL3 */
 		};
 
-		user {
+		key-user {
 			label = "user";
 			linux,code = <BTN_0>;
 			gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
index 8e7dfcffe1fb..43641cb82398 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
@@ -37,10 +37,10 @@
 		};
 	};
 
-	r_gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		k1 {
+		key-0 {
 			label = "k1";
 			linux,code = <BTN_0>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; /* PL3 */
@@ -90,7 +90,7 @@
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";
 	};
 
@@ -151,7 +151,7 @@
 
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "lpo";
 		vbat-supply = <&reg_vcc3v3>;
 		vddio-supply = <&reg_vcc3v3>;
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
index be49eabbff94..9e1a33f94cad 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
@@ -103,12 +103,40 @@
 	};
 };
 
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pa_pins>;
 	status = "okay";
 };
 
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>, <&uart3_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_vcc3v3>;
+		vddio-supply = <&reg_vcc3v3>;
+		device-wakeup-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+		host-wakeup-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
+		shutdown-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+	};
+};
+
 &usbphy {
 	/* USB VBUS is always on */
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
index 9f33f6fae595..df71fab3cf4e 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
@@ -45,6 +45,10 @@
 / {
 	model = "FriendlyARM NanoPi NEO";
 	compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3";
+
+	aliases {
+		ethernet0 = &emac;
+	};
 };
 
 &ehci0 {
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
index 26e2e6172e0d..42cd1131adf3 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
@@ -46,7 +46,7 @@
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";
 	};
 
@@ -147,7 +147,7 @@
 
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "lpo";
 		vbat-supply = <&reg_vcc3v3>;
 		vddio-supply = <&reg_vcc3v3>;
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
index fc45d5aaa67f..cf8413fba6c1 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
@@ -73,11 +73,10 @@
 		};
 	};
 
-	r_gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		input-name = "k1";
 
-		k1 {
+		key-0 {
 			label = "k1";
 			linux,code = <KEY_POWER>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
index 9daffd90c12f..f1f9dbead32a 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
@@ -88,16 +88,16 @@
 		};
 	};
 
-	r_gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		sw2 {
+		switch-2 {
 			label = "sw2";
 			linux,code = <BTN_1>;
 			gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>;
 		};
 
-		sw4 {
+		switch-4 {
 			label = "sw4";
 			linux,code = <KEY_POWER>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts
index 6f9c97add54e..305b34a321f5 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts
@@ -87,10 +87,10 @@
 		};
 	};
 
-	r_gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		sw4 {
+		switch-4 {
 			label = "sw4";
 			linux,code = <BTN_0>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
index 4759ba3f2986..59f6f6d5e7ca 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
@@ -86,10 +86,10 @@
 		};
 	};
 
-	r_gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		sw4 {
+		switch-4 {
 			label = "sw4";
 			linux,code = <BTN_0>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
index 90f75fa85e68..b96e015f54ee 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
@@ -86,10 +86,10 @@
 		};
 	};
 
-	r_gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		sw4 {
+		switch-4 {
 			label = "sw4";
 			linux,code = <KEY_POWER>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 845f25235407..eac2349a2380 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -245,7 +245,7 @@
 		cpu_thermal: cpu-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
-			thermal-sensors = <&ths 0>;
+			thermal-sensors = <&ths>;
 
 			trips {
 				cpu_hot_trip: cpu-hot {
diff --git a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts b/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts
index bf5b5e2f6168..bc394686fedb 100644
--- a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts
+++ b/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts
@@ -91,7 +91,7 @@
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";
 	};
 };
@@ -283,7 +283,7 @@
 
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "lpo";
 		vbat-supply = <&reg_dldo1>;
 		vddio-supply = <&reg_aldo3>;
diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
index a6a1087a0c9b..28197bbcb1d5 100644
--- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
+++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
@@ -43,6 +43,7 @@
 
 /dts-v1/;
 #include "sun8i-r40.dtsi"
+#include "sun8i-r40-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 
@@ -113,6 +114,10 @@
 	status = "okay";
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &de {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun8i-r40-cpu-opp.dtsi b/arch/arm/boot/dts/sun8i-r40-cpu-opp.dtsi
new file mode 100644
index 000000000000..649928b361af
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-r40-cpu-opp.dtsi
@@ -0,0 +1,52 @@
+/{
+	cpu0_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <1000000 1000000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+
+		opp-912000000 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-microvolt = <1100000 1100000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1160000 1160000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+
+		opp-1104000000 {
+			opp-hz = /bits/ 64 <1104000000>;
+			opp-microvolt = <1240000 1240000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1300000 1300000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+	};
+};
+
+&cpu0 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu1 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu2 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu3 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
diff --git a/arch/arm/boot/dts/sun8i-r40-feta40i.dtsi b/arch/arm/boot/dts/sun8i-r40-feta40i.dtsi
index 265e0fa57a32..9f39b5a2bb35 100644
--- a/arch/arm/boot/dts/sun8i-r40-feta40i.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40-feta40i.dtsi
@@ -5,6 +5,11 @@
 //  Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
 
 #include "sun8i-r40.dtsi"
+#include "sun8i-r40-cpu-opp.dtsi"
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
 
 &i2c0 {
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index 03d3e5f45a09..4ef26d8f5340 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -42,6 +42,7 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
 #include <dt-bindings/clock/sun8i-de2.h>
 #include <dt-bindings/clock/sun8i-r40-ccu.h>
 #include <dt-bindings/clock/sun8i-tcon-top.h>
@@ -84,24 +85,36 @@
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <0>;
+			clocks = <&ccu CLK_CPU>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <1>;
+			clocks = <&ccu CLK_CPU>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@2 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <2>;
+			clocks = <&ccu CLK_CPU>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@3 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <3>;
+			clocks = <&ccu CLK_CPU>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
 		};
 	};
 
@@ -117,6 +130,30 @@
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&ths 0>;
+
+			trips {
+				cpu_hot_trip: cpu-hot {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_very_hot_trip: cpu-very-hot {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				cpu-hot-limit {
+					trip = <&cpu_hot_trip>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		gpu_thermal: gpu-thermal {
@@ -485,7 +522,7 @@
 		ccu: clock@1c20000 {
 			compatible = "allwinner,sun8i-r40-ccu";
 			reg = <0x01c20000 0x400>;
-			clocks = <&osc24M>, <&rtc 0>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
 			clock-names = "hosc", "losc";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -504,7 +541,8 @@
 			compatible = "allwinner,sun8i-r40-pinctrl";
 			reg = <0x01c20800 0x400>;
 			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
@@ -1231,7 +1269,7 @@
 			reg-io-width = <1>;
 			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_HDMI0>, <&ccu CLK_HDMI_SLOW>,
-				 <&ccu CLK_HDMI>, <&rtc 0>;
+				 <&ccu CLK_HDMI>, <&rtc CLK_OSC32K>;
 			clock-names = "iahb", "isfr", "tmds", "cec";
 			resets = <&ccu RST_BUS_HDMI1>;
 			reset-names = "ctrl";
diff --git a/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts b/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts
index 6931aaab2382..9f472521f4a4 100644
--- a/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts
+++ b/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts
@@ -45,6 +45,7 @@
 
 /dts-v1/;
 #include "sun8i-r40.dtsi"
+#include "sun8i-r40-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 
@@ -88,6 +89,10 @@
 	status = "okay";
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &de {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi
index b30bc1a25ebb..db194c606fdc 100644
--- a/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
@@ -42,6 +42,7 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
 #include <dt-bindings/clock/sun8i-v3s-ccu.h>
 #include <dt-bindings/reset/sun8i-v3s-ccu.h>
 #include <dt-bindings/clock/sun8i-de2.h>
@@ -321,7 +322,7 @@
 		ccu: clock@1c20000 {
 			compatible = "allwinner,sun8i-v3s-ccu";
 			reg = <0x01c20000 0x400>;
-			clocks = <&osc24M>, <&rtc 0>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
 			clock-names = "hosc", "losc";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -342,7 +343,8 @@
 			reg = <0x01c20800 0x400>;
 			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			#gpio-cells = <3>;
@@ -593,6 +595,17 @@
 			#size-cells = <0>;
 		};
 
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
 		csi1: camera@1cb4000 {
 			compatible = "allwinner,sun8i-v3s-csi";
 			reg = <0x01cb4000 0x3000>;
@@ -604,16 +617,5 @@
 			resets = <&ccu RST_BUS_CSI>;
 			status = "disabled";
 		};
-
-		gic: interrupt-controller@1c81000 {
-			compatible = "arm,gic-400";
-			reg = <0x01c81000 0x1000>,
-			      <0x01c82000 0x2000>,
-			      <0x01c84000 0x2000>,
-			      <0x01c86000 0x2000>;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-		};
 	};
 };
diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
index 47954551f573..434871040aca 100644
--- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
+++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
@@ -42,6 +42,7 @@
 
 /dts-v1/;
 #include "sun8i-r40.dtsi"
+#include "sun8i-r40-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 
@@ -107,6 +108,10 @@
 	status = "okay";
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &de {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index ce4fa6706d06..7d3f3300f431 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -1218,7 +1218,6 @@
 				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&apbs_gates 0>, <&osc24M>, <&osc32k>;
 			clock-names = "apb", "hosc", "losc";
-			resets = <&apbs_rst 0>;
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
diff --git a/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts
index a1154e6c7cb5..04e59b8381cb 100644
--- a/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts
+++ b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts
@@ -11,12 +11,43 @@
 	compatible = "licheepi,licheepi-nano", "allwinner,suniv-f1c100s";
 
 	aliases {
+		mmc0 = &mmc0;
 		serial0 = &uart0;
+		spi0 = &spi0;
 	};
 
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&mmc0 {
+	broken-cd;
+	bus-width = <4>;
+	disable-wp;
+	status = "okay";
+	vmmc-supply = <&reg_vcc3v3>;
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pc_pins>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q128", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
 };
 
 &uart0 {
diff --git a/arch/arm/boot/dts/suniv-f1c100s.dtsi b/arch/arm/boot/dts/suniv-f1c100s.dtsi
index 6100d3b75f61..0edc1724407b 100644
--- a/arch/arm/boot/dts/suniv-f1c100s.dtsi
+++ b/arch/arm/boot/dts/suniv-f1c100s.dtsi
@@ -4,6 +4,9 @@
  * Copyright 2018 Mesih Kilinc <mesihkilinc@gmail.com>
  */
 
+#include <dt-bindings/clock/suniv-ccu-f1c100s.h>
+#include <dt-bindings/reset/suniv-ccu-f1c100s.h>
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -26,9 +29,13 @@
 	};
 
 	cpus {
-		cpu {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
 			compatible = "arm,arm926ej-s";
 			device_type = "cpu";
+			reg = <0x0>;
 		};
 	};
 
@@ -62,6 +69,70 @@
 			};
 		};
 
+		spi0: spi@1c05000 {
+			compatible = "allwinner,suniv-f1c100s-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <10>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_BUS_SPI0>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@1c06000 {
+			compatible = "allwinner,suniv-f1c100s-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <11>;
+			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_BUS_SPI1>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI1>;
+			status = "disabled";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,suniv-f1c100s-mmc",
+				     "allwinner,sun7i-a20-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>,
+				 <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <23>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,suniv-f1c100s-mmc",
+				     "allwinner,sun7i-a20-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>,
+				 <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <24>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		ccu: clock@1c20000 {
 			compatible = "allwinner,suniv-f1c100s-ccu";
 			reg = <0x01c20000 0x400>;
@@ -82,13 +153,24 @@
 			compatible = "allwinner,suniv-f1c100s-pinctrl";
 			reg = <0x01c20800 0x400>;
 			interrupts = <38>, <39>, <40>;
-			clocks = <&ccu 37>, <&osc24M>, <&osc32k>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
 			#gpio-cells = <3>;
 
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+			};
+
+			spi0_pc_pins: spi0-pc-pins {
+				pins = "PC0", "PC1", "PC2", "PC3";
+				function = "spi0";
+			};
+
 			uart0_pe_pins: uart0-pe-pins {
 				pins = "PE0", "PE1";
 				function = "uart0";
@@ -98,14 +180,16 @@
 		timer@1c20c00 {
 			compatible = "allwinner,suniv-f1c100s-timer";
 			reg = <0x01c20c00 0x90>;
-			interrupts = <13>;
+			interrupts = <13>, <14>, <15>;
 			clocks = <&osc24M>;
 		};
 
 		wdt: watchdog@1c20ca0 {
 			compatible = "allwinner,suniv-f1c100s-wdt",
-				     "allwinner,sun4i-a10-wdt";
+				     "allwinner,sun6i-a31-wdt";
 			reg = <0x01c20ca0 0x20>;
+			interrupts = <16>;
+			clocks = <&osc32k>;
 		};
 
 		uart0: serial@1c25000 {
@@ -114,8 +198,8 @@
 			interrupts = <1>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&ccu 38>;
-			resets = <&ccu 24>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
 			status = "disabled";
 		};
 
@@ -125,8 +209,8 @@
 			interrupts = <2>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&ccu 39>;
-			resets = <&ccu 25>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
 			status = "disabled";
 		};
 
@@ -136,8 +220,8 @@
 			interrupts = <3>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&ccu 40>;
-			resets = <&ccu 26>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
 			status = "disabled";
 		};
 	};
diff --git a/arch/arm/boot/dts/sunplus-sp7021-achip.dtsi b/arch/arm/boot/dts/sunplus-sp7021-achip.dtsi
new file mode 100644
index 000000000000..493d32357e4e
--- /dev/null
+++ b/arch/arm/boot/dts/sunplus-sp7021-achip.dtsi
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for Sunplus SP7021
+ *
+ * Copyright (C) 2021 Sunplus Technology Co.
+ */
+
+#include "sunplus-sp7021.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "sunplus,sp7021-achip", "sunplus,sp7021";
+	model = "Sunplus SP7021 (CA7)";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clock-frequency = <931000000>;
+		};
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+			clock-frequency = <931000000>;
+		};
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <2>;
+			clock-frequency = <931000000>;
+		};
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <3>;
+			clock-frequency = <931000000>;
+		};
+	};
+
+	gic: interrupt-controller@9f101000 {
+		compatible = "arm,cortex-a7-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0x9f101000 0x1000>,
+		      <0x9f102000 0x2000>,
+		      <0x9f104000 0x2000>,
+		      <0x9f106000 0x2000>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <XTAL>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	soc@9c000000 {
+		intc: interrupt-controller@780 {
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, /* EXT_INT0 */
+				     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; /* EXT_INT1 */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sunplus-sp7021-demo-v3.dts b/arch/arm/boot/dts/sunplus-sp7021-demo-v3.dts
new file mode 100644
index 000000000000..d5c5ffc20565
--- /dev/null
+++ b/arch/arm/boot/dts/sunplus-sp7021-demo-v3.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for Sunplus SP7021 Demo V3 SBC board
+ *
+ * Copyright (C) Sunplus Technology Co.
+ */
+
+/dts-v1/;
+
+#include "sunplus-sp7021-achip.dtsi"
+
+/ {
+	compatible = "sunplus,sp7021-demo-v3", "sunplus,sp7021";
+	model = "Sunplus SP7021/CA7/Demo_V3";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/sunplus-sp7021.dtsi b/arch/arm/boot/dts/sunplus-sp7021.dtsi
new file mode 100644
index 000000000000..7dc4ce3619c7
--- /dev/null
+++ b/arch/arm/boot/dts/sunplus-sp7021.dtsi
@@ -0,0 +1,310 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for Sunplus SP7021
+ *
+ * Copyright (C) 2021 Sunplus Technology Co.
+ */
+
+#include <dt-bindings/clock/sunplus,sp7021-clkc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/reset/sunplus,sp7021-reset.h>
+#include <dt-bindings/pinctrl/sppctl-sp7021.h>
+#include <dt-bindings/gpio/gpio.h>
+
+#define XTAL	27000000
+
+/ {
+	compatible = "sunplus,sp7021";
+	model = "Sunplus SP7021";
+
+	clocks {
+		extclk: osc0 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <XTAL>;
+			clock-output-names = "extclk";
+		};
+	};
+
+	soc@9c000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x9c000000 0x400000>;
+		interrupt-parent = <&intc>;
+
+		clkc: clock-controller@4 {
+			compatible = "sunplus,sp7021-clkc";
+			reg = <0x4 0x28>,
+			      <0x200 0x44>,
+			      <0x268 0x04>;
+			clocks = <&extclk>;
+			#clock-cells = <1>;
+		};
+
+		intc: interrupt-controller@780 {
+			compatible = "sunplus,sp7021-intc";
+			reg = <0x780 0x80>, <0xa80 0x80>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		otp: otp@af00 {
+			compatible = "sunplus,sp7021-ocotp";
+			reg = <0xaf00 0x34>, <0xaf80 0x58>;
+			reg-names = "hb_gpio", "otprx";
+			clocks = <&clkc CLK_OTPRX>;
+			resets = <&rstc RST_OTPRX>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			therm_calib: thermal-calibration@14 {
+				reg = <0x14 0x3>;
+			};
+			disc_vol: disconnect-voltage@18 {
+				reg = <0x18 0x2>;
+			};
+			mac_addr0: mac-address0@34 {
+				reg = <0x34 0x6>;
+			};
+			mac_addr1: mac-address1@3a {
+				reg = <0x3a 0x6>;
+			};
+		};
+
+		pctl: pinctrl@100 {
+			compatible = "sunplus,sp7021-pctl";
+			reg = <0x100 0x100>,
+			      <0x300 0x100>,
+			      <0x32e4 0x1C>,
+			      <0x80 0x20>;
+			reg-names = "moon2", "gpioxt", "first", "moon1";
+			gpio-controller;
+			#gpio-cells = <2>;
+			clocks = <&clkc CLK_GPIO>;
+			resets = <&rstc RST_GPIO>;
+
+			emac_pins: pinmux-emac-pins {
+				sunplus,pins = <
+					SPPCTL_IOPAD(49,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_CLK_OUT,0)
+					SPPCTL_IOPAD(44,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_MAC_SMI_MDC,0)
+					SPPCTL_IOPAD(43,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_MAC_SMI_MDIO,0)
+					SPPCTL_IOPAD(52,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXEN,0)
+					SPPCTL_IOPAD(50,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXD0,0)
+					SPPCTL_IOPAD(51,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXD1,0)
+					SPPCTL_IOPAD(46,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_CRSDV,0)
+					SPPCTL_IOPAD(47,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXD0,0)
+					SPPCTL_IOPAD(48,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXD1,0)
+					SPPCTL_IOPAD(45,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXER,0)
+					SPPCTL_IOPAD(59,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_TXEN,0)
+					SPPCTL_IOPAD(57,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_TXD0,0)
+					SPPCTL_IOPAD(58,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_TXD1,0)
+					SPPCTL_IOPAD(54,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_CRSDV,0)
+					SPPCTL_IOPAD(55,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_RXD0,0)
+					SPPCTL_IOPAD(56,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_RXD1,0)
+					SPPCTL_IOPAD(53,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_RXER,0)
+				>;
+				sunplus,zerofunc = <
+					MUXF_L2SW_LED_FLASH0
+					MUXF_L2SW_LED_FLASH1
+					MUXF_L2SW_LED_ON0
+					MUXF_L2SW_LED_ON1
+					MUXF_DAISY_MODE
+				>;
+			};
+
+			emmc_pins: pinmux-emmc-pins {
+				function = "CARD0_EMMC";
+				groups = "CARD0_EMMC";
+			};
+
+			leds_pins: pinmux-leds-pins {
+				sunplus,pins = < SPPCTL_IOPAD(0,SPPCTL_PCTL_G_GPIO,0,SPPCTL_PCTL_L_OUT) >;
+			};
+
+			sdcard_pins: pinmux-sdcard-pins {
+				function = "SD_CARD";
+				groups = "SD_CARD";
+				sunplus,pins = < SPPCTL_IOPAD(91, SPPCTL_PCTL_G_GPIO, 0, 0) >;
+			};
+
+			spi0_pins: pinmux-spi0-pins {
+				sunplus,pins = <
+					SPPCTL_IOPAD(26,SPPCTL_PCTL_G_GPIO,0,0)
+					SPPCTL_IOPAD(28,SPPCTL_PCTL_G_GPIO,0,0)
+					SPPCTL_IOPAD(23,SPPCTL_PCTL_G_PMUX,MUXF_SPI0S_DO,0)
+					SPPCTL_IOPAD(25,SPPCTL_PCTL_G_PMUX,MUXF_SPI0S_DI,0)
+					SPPCTL_IOPAD(27,SPPCTL_PCTL_G_PMUX,MUXF_SPI0S_CLK,0)
+				>;
+			};
+
+			uart0_pins: pinmux-uart0-pins {
+				function = "UA0";
+				groups = "UA0";
+			};
+
+			uart1_pins: pinmux-uart1-pins {
+				sunplus,pins = <
+					SPPCTL_IOPAD(14,SPPCTL_PCTL_G_PMUX,MUXF_UA4_TX,0)
+					SPPCTL_IOPAD(16,SPPCTL_PCTL_G_PMUX,MUXF_UA4_RX,0)
+				>;
+			};
+
+			uart2_pins: pinmux-uart2-pins {
+				sunplus,pins = <
+					SPPCTL_IOPAD(16,SPPCTL_PCTL_G_PMUX,MUXF_UA2_TX,0)
+					SPPCTL_IOPAD(17,SPPCTL_PCTL_G_PMUX,MUXF_UA2_RX,0)
+					SPPCTL_IOPAD(18,SPPCTL_PCTL_G_PMUX,MUXF_UA2_RTS,0)
+					SPPCTL_IOPAD(19,SPPCTL_PCTL_G_PMUX,MUXF_UA2_CTS,0)
+				>;
+			};
+
+			uart4_pins: pinmux-uart4-pins {
+				sunplus,pins = <
+					SPPCTL_IOPAD(22,SPPCTL_PCTL_G_PMUX,MUXF_UA4_TX,0)
+					SPPCTL_IOPAD(20,SPPCTL_PCTL_G_PMUX,MUXF_UA4_RX,0)
+					SPPCTL_IOPAD(23,SPPCTL_PCTL_G_PMUX,MUXF_UA4_RTS,0)
+					SPPCTL_IOPAD(21,SPPCTL_PCTL_G_PMUX,MUXF_UA4_CTS,0)
+				>;
+			};
+		};
+
+		rstc: reset@54 {
+			compatible = "sunplus,sp7021-reset";
+			reg = <0x54 0x28>;
+			#reset-cells = <1>;
+		};
+
+		rtc: rtc@3a00 {
+			compatible = "sunplus,sp7021-rtc";
+			reg = <0x3a00 0x80>;
+			reg-names = "rtc";
+			clocks = <&clkc CLK_RTC>;
+			resets = <&rstc RST_RTC>;
+			interrupts = <163 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		spi_controller0: spi@2d80 {
+			compatible = "sunplus,sp7021-spi";
+			reg = <0x2d80 0x80>, <0x2e00 0x80>;
+			reg-names = "master", "slave";
+			interrupts = <144 IRQ_TYPE_LEVEL_HIGH>,
+				     <146 IRQ_TYPE_LEVEL_HIGH>,
+				     <145 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dma_w", "master_risc", "slave_risc";
+			clocks = <&clkc CLK_SPI_COMBO_0>;
+			resets = <&rstc RST_SPI_COMBO_0>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_pins>;
+			cs-gpios = <&pctl 26 GPIO_ACTIVE_LOW>,
+				   <&pctl 28 GPIO_ACTIVE_LOW>;
+		};
+
+		spi_controller1: spi@f480 {
+			compatible = "sunplus,sp7021-spi";
+			reg = <0xf480 0x80>, <0xf500 0x80>;
+			reg-names = "master", "slave";
+			interrupts = <67 IRQ_TYPE_LEVEL_HIGH>,
+				     <69 IRQ_TYPE_LEVEL_HIGH>,
+				     <68 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dma_w", "master_risc", "slave_risc";
+			clocks = <&clkc CLK_SPI_COMBO_1>;
+			resets = <&rstc RST_SPI_COMBO_1>;
+			spi-max-frequency = <25000000>;
+			status = "disabled";
+		};
+
+		spi_controller2: spi@f600 {
+			compatible = "sunplus,sp7021-spi";
+			reg = <0xf600 0x80>, <0xf680 0x80>;
+			reg-names = "master", "slave";
+			interrupts = <70 IRQ_TYPE_LEVEL_HIGH>,
+				     <72 IRQ_TYPE_LEVEL_HIGH>,
+				     <71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dma_w", "master_risc", "slave_risc";
+			clocks = <&clkc CLK_SPI_COMBO_2>;
+			resets = <&rstc RST_SPI_COMBO_2>;
+			spi-max-frequency = <25000000>;
+			status = "disabled";
+		};
+
+		spi_controller3: spi@f780 {
+			compatible = "sunplus,sp7021-spi";
+			reg = <0xf780 0x80>, <0xf800 0x80>;
+			reg-names = "master", "slave";
+			interrupts = <73 IRQ_TYPE_LEVEL_HIGH>,
+				     <75 IRQ_TYPE_LEVEL_HIGH>,
+				     <74 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dma_w", "master_risc", "slave_risc";
+			clocks = <&clkc CLK_SPI_COMBO_3>;
+			resets = <&rstc RST_SPI_COMBO_3>;
+			spi-max-frequency = <25000000>;
+			status = "disabled";
+		};
+
+		uart0: serial@900 {
+			compatible = "sunplus,sp7021-uart";
+			reg = <0x900 0x80>;
+			interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkc CLK_UA0>;
+			resets = <&rstc RST_UA0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins>;
+		};
+
+		uart1: serial@980 {
+			compatible = "sunplus,sp7021-uart";
+			reg = <0x980 0x80>;
+			interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkc CLK_UA1>;
+			resets = <&rstc RST_UA1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_pins>;
+			status = "disabled";
+		};
+
+		uart2: serial@800 {
+			compatible = "sunplus,sp7021-uart";
+			reg = <0x800 0x80>;
+			interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkc CLK_UA2>;
+			resets = <&rstc RST_UA2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_pins>;
+			status = "disabled";
+		};
+
+		uart3: serial@880 {
+			compatible = "sunplus,sp7021-uart";
+			reg = <0x880 0x80>;
+			interrupts = <56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkc CLK_UA3>;
+			resets = <&rstc RST_UA3>;
+			status = "disabled";
+		};
+
+		uart4: serial@8780 {
+			compatible = "sunplus,sp7021-uart";
+			reg = <0x8780 0x80>;
+			interrupts = <134 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkc CLK_UA4>;
+			resets = <&rstc RST_UA4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart4_pins>;
+			status = "disabled";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins>;
+		system-led {
+			label = "system-led";
+			gpios = <&pctl 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
index d03f5853ef7b..e899d14f38c3 100644
--- a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
+++ b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
@@ -77,10 +77,10 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		sw4 {
+		switch-4 {
 			label = "power";
 			linux,code = <KEY_POWER>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
@@ -101,7 +101,7 @@
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";
 	};
 };
@@ -221,7 +221,7 @@
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
 		max-speed = <1500000>;
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "lpo";
 		vbat-supply = <&reg_vcc3v3>;
 		vddio-supply = <&reg_vcc3v3>;
diff --git a/arch/arm/boot/dts/sunxi-h3-h5-emlid-neutis.dtsi b/arch/arm/boot/dts/sunxi-h3-h5-emlid-neutis.dtsi
index fc67e30fe212..60804b0e6c56 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5-emlid-neutis.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5-emlid-neutis.dtsi
@@ -22,7 +22,7 @@
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */
 		post-power-on-delay-ms = <200>;
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";
 	};
 };
@@ -124,7 +124,7 @@
 
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "lpo";
 		vbat-supply = <&reg_vcc3v3>;
 		vddio-supply = <&reg_vcc3v3>;
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 4aeca9e7e30d..09aefb4e90f8 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -40,6 +40,7 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
+#include <dt-bindings/clock/sun6i-rtc.h>
 #include <dt-bindings/clock/sun8i-de2.h>
 #include <dt-bindings/clock/sun8i-h3-ccu.h>
 #include <dt-bindings/clock/sun8i-r-ccu.h>
@@ -386,7 +387,7 @@
 		ccu: clock@1c20000 {
 			/* compatible is in per SoC .dtsi file */
 			reg = <0x01c20000 0x400>;
-			clocks = <&osc24M>, <&rtc 0>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
 			clock-names = "hosc", "losc";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -398,7 +399,8 @@
 			interrupt-parent = <&r_intc>;
 			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			#gpio-cells = <3>;
@@ -818,7 +820,7 @@
 			reg-io-width = <1>;
 			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
-				 <&ccu CLK_HDMI>, <&rtc 0>;
+				 <&ccu CLK_HDMI>, <&rtc CLK_OSC32K>;
 			clock-names = "iahb", "isfr", "tmds", "cec";
 			resets = <&ccu RST_BUS_HDMI1>;
 			reset-names = "ctrl";
@@ -878,7 +880,7 @@
 		r_ccu: clock@1f01400 {
 			compatible = "allwinner,sun8i-h3-r-ccu";
 			reg = <0x01f01400 0x100>;
-			clocks = <&osc24M>, <&rtc 0>, <&rtc 2>,
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>,
 				 <&ccu CLK_PLL_PERIPH0>;
 			clock-names = "hosc", "losc", "iosc", "pll-periph";
 			#clock-cells = <1>;
@@ -913,12 +915,26 @@
 			#size-cells = <0>;
 		};
 
+		r_uart: serial@1f02800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01f02800 0x400>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&r_ccu CLK_APB0_UART>;
+			resets = <&r_ccu RST_APB0_UART>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_uart_pins>;
+			status = "disabled";
+		};
+
 		r_pio: pinctrl@1f02c00 {
 			compatible = "allwinner,sun8i-h3-r-pinctrl";
 			reg = <0x01f02c00 0x400>;
 			interrupt-parent = <&r_intc>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&rtc 0>;
+			clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			#gpio-cells = <3>;
@@ -939,6 +955,11 @@
 				pins = "PL10";
 				function = "s_pwm";
 			};
+
+			r_uart_pins: r-uart-pins {
+				pins = "PL2", "PL3";
+				function = "s_uart";
+			};
 		};
 
 		r_pwm: pwm@1f03800 {
diff --git a/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi b/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi
index 9e14fe5fdcde..89731bb34c6b 100644
--- a/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi
+++ b/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi
@@ -42,10 +42,10 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "power";
 			linux,code = <KEY_POWER>;
 			gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
diff --git a/arch/arm/boot/dts/tegra114-asus-tf701t.dts b/arch/arm/boot/dts/tegra114-asus-tf701t.dts
index b791ce97424b..284209b0bd96 100644
--- a/arch/arm/boot/dts/tegra114-asus-tf701t.dts
+++ b/arch/arm/boot/dts/tegra114-asus-tf701t.dts
@@ -684,7 +684,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&gpio_keys_default>;
 
-		power {
+		button-power {
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
@@ -692,14 +692,14 @@
 			wakeup-source;
 		};
 
-		volume-up {
+		button-volume-up {
 			label = "Volume Up";
 			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
 			debounce-interval = <10>;
 		};
 
-		volume-down {
+		button-volume-down {
 			label = "Volume Down";
 			gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
@@ -715,7 +715,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&gpio_hall_sensor_default>;
 
-		hall-sensor {
+		switch-hall-sensor {
 			label = "Hall Effect Sensor";
 			gpios = <&gpio TEGRA_GPIO(O, 5) GPIO_ACTIVE_LOW>;
 			linux,input-type = <EV_SW>;
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index 658edfb8d7fa..fffd62bcea6a 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -1161,26 +1161,26 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		home {
+		key-home {
 			label = "Home";
 			gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
 		};
 
-		power {
+		key-power {
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			wakeup-source;
 		};
 
-		volume_down {
+		key-volume-down {
 			label = "Volume Down";
 			gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
 		};
 
-		volume_up {
+		key-volume-up {
 			label = "Volume Up";
 			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
diff --git a/arch/arm/boot/dts/tegra114-roth.dts b/arch/arm/boot/dts/tegra114-roth.dts
index 2498cf18fd39..b9d00009d1f4 100644
--- a/arch/arm/boot/dts/tegra114-roth.dts
+++ b/arch/arm/boot/dts/tegra114-roth.dts
@@ -1025,19 +1025,19 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		back {
+		key-back {
 			label = "Back";
 			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_BACK>;
 		};
 
-		home {
+		key-home {
 			label = "Home";
 			gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
 		};
 
-		power {
+		key-power {
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
diff --git a/arch/arm/boot/dts/tegra114-tn7.dts b/arch/arm/boot/dts/tegra114-tn7.dts
index ef8f722dd9cb..f02d8c79eee7 100644
--- a/arch/arm/boot/dts/tegra114-tn7.dts
+++ b/arch/arm/boot/dts/tegra114-tn7.dts
@@ -282,20 +282,20 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			wakeup-source;
 		};
 
-		volume_down {
+		key-volume-down {
 			label = "Volume Down";
 			gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
 		};
 
-		volume_up {
+		key-volume-up {
 			label = "Volume Up";
 			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
diff --git a/arch/arm/boot/dts/tegra124-apalis-eval.dts b/arch/arm/boot/dts/tegra124-apalis-eval.dts
index 3209554ec7e6..bce12b3411fc 100644
--- a/arch/arm/boot/dts/tegra124-apalis-eval.dts
+++ b/arch/arm/boot/dts/tegra124-apalis-eval.dts
@@ -191,7 +191,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wakeup {
+		key-wakeup {
 			label = "WAKE1_MICO";
 			gpios = <&gpio TEGRA_GPIO(DD, 3) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WAKEUP>;
diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts b/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts
index 814257c79bf1..800283ad6bdc 100644
--- a/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts
+++ b/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts
@@ -193,7 +193,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wakeup {
+		key-wakeup {
 			label = "WAKE1_MICO";
 			gpios = <&gpio TEGRA_GPIO(DD, 3) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WAKEUP>;
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index 28b889e4e33b..f41dd4039c07 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -1886,7 +1886,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
diff --git a/arch/arm/boot/dts/tegra124-nyan-big-fhd.dts b/arch/arm/boot/dts/tegra124-nyan-big-fhd.dts
index d35fb79d2f51..4db43324dafa 100644
--- a/arch/arm/boot/dts/tegra124-nyan-big-fhd.dts
+++ b/arch/arm/boot/dts/tegra124-nyan-big-fhd.dts
@@ -5,7 +5,13 @@
 
 / {
 	/* Version of Nyan Big with 1080p panel */
-	panel {
-		compatible = "auo,b133htn01";
+	host1x@50000000 {
+		dpaux@545c0000 {
+			aux-bus {
+				panel: panel {
+					compatible = "auo,b133htn01";
+				};
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/tegra124-nyan-big.dts b/arch/arm/boot/dts/tegra124-nyan-big.dts
index 1d2aac2cb6d0..fdc1d64dfff9 100644
--- a/arch/arm/boot/dts/tegra124-nyan-big.dts
+++ b/arch/arm/boot/dts/tegra124-nyan-big.dts
@@ -13,12 +13,15 @@
 		     "google,nyan-big-rev1", "google,nyan-big-rev0",
 		     "google,nyan-big", "google,nyan", "nvidia,tegra124";
 
-	panel: panel {
-		compatible = "auo,b133xtn01";
-
-		power-supply = <&vdd_3v3_panel>;
-		backlight = <&backlight>;
-		ddc-i2c-bus = <&dpaux>;
+	host1x@50000000 {
+		dpaux@545c0000 {
+			aux-bus {
+				panel: panel {
+					compatible = "auo,b133xtn01";
+					backlight = <&backlight>;
+				};
+			};
+		};
 	};
 
 	mmc@700b0400 { /* SD Card on this bus */
diff --git a/arch/arm/boot/dts/tegra124-nyan-blaze.dts b/arch/arm/boot/dts/tegra124-nyan-blaze.dts
index 677babde6460..abdf4456826f 100644
--- a/arch/arm/boot/dts/tegra124-nyan-blaze.dts
+++ b/arch/arm/boot/dts/tegra124-nyan-blaze.dts
@@ -15,12 +15,15 @@
 		     "google,nyan-blaze-rev0", "google,nyan-blaze",
 		     "google,nyan", "nvidia,tegra124";
 
-	panel: panel {
-		compatible = "samsung,ltn140at29-301";
-
-		power-supply = <&vdd_3v3_panel>;
-		backlight = <&backlight>;
-		ddc-i2c-bus = <&dpaux>;
+	host1x@50000000 {
+		dpaux@545c0000 {
+			aux-bus {
+				panel: panel {
+					compatible = "samsung,ltn140at29-301";
+					backlight = <&backlight>;
+				};
+			};
+		};
 	};
 
 	sound {
diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi
index a93cfb492ba1..13061ab5247b 100644
--- a/arch/arm/boot/dts/tegra124-nyan.dtsi
+++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
@@ -603,7 +603,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		lid {
+		switch-lid {
 			label = "Lid";
 			gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;
 			linux,input-type = <5>;
@@ -612,7 +612,7 @@
 			wakeup-source;
 		};
 
-		power {
+		key-power {
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts
index 232c90604df9..8f40fcfc11b0 100644
--- a/arch/arm/boot/dts/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -48,6 +48,13 @@
 		dpaux@545c0000 {
 			vdd-supply = <&vdd_3v3_panel>;
 			status = "okay";
+
+			aux-bus {
+				panel: panel {
+					compatible = "lg,lp129qe";
+					backlight = <&backlight>;
+				};
+			};
 		};
 	};
 
@@ -1071,7 +1078,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
@@ -1080,13 +1087,6 @@
 		};
 	};
 
-	panel: panel {
-		compatible = "lg,lp129qe";
-		power-supply = <&vdd_3v3_panel>;
-		backlight = <&backlight>;
-		ddc-i2c-bus = <&dpaux>;
-	};
-
 	vdd_mux: regulator-mux {
 		compatible = "regulator-fixed";
 		regulator-name = "+VDD_MUX";
diff --git a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
index a170a4ba36c1..dac6d02a1b15 100644
--- a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
+++ b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
@@ -417,7 +417,7 @@
 			vddio-supply = <&vdd_1v8_sys>;
 
 			device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
-			shutdown-gpios =      <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
+			shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
 		};
 	};
 
@@ -905,7 +905,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_POWER>;
@@ -914,7 +914,7 @@
 			wakeup-source;
 		};
 
-		rotation-lock {
+		key-rotation-lock {
 			label = "Rotate-lock";
 			gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_HIGH>;
 			linux,code = <SW_ROTATE_LOCK>;
@@ -922,7 +922,7 @@
 			debounce-interval = <10>;
 		};
 
-		volume-up {
+		key-volume-up {
 			label = "Volume Up";
 			gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
@@ -931,7 +931,7 @@
 			wakeup-source;
 		};
 
-		volume-down {
+		key-volume-down {
 			label = "Volume Down";
 			gpios = <&gpio TEGRA_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
diff --git a/arch/arm/boot/dts/tegra20-asus-tf101.dts b/arch/arm/boot/dts/tegra20-asus-tf101.dts
index 020172ee7340..bf797a1f27ea 100644
--- a/arch/arm/boot/dts/tegra20-asus-tf101.dts
+++ b/arch/arm/boot/dts/tegra20-asus-tf101.dts
@@ -436,17 +436,27 @@
 		};
 	};
 
+	spdif@70002400 {
+		status = "okay";
+
+		nvidia,fixed-parent-rate;
+	};
+
 	i2s@70002800 {
 		status = "okay";
+
+		nvidia,fixed-parent-rate;
 	};
 
 	serial@70006040 {
 		compatible = "nvidia,tegra20-hsuart";
+		/delete-property/ reg-shift;
 		/* GPS BCM4751 */
 	};
 
 	serial@70006200 {
 		compatible = "nvidia,tegra20-hsuart";
+		/delete-property/ reg-shift;
 		status = "okay";
 
 		/* Azurewave AW-NH615 BCM4329B1 */
@@ -467,7 +477,7 @@
 			vddio-supply = <&vdd_1v8_sys>;
 
 			device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
-			shutdown-gpios =      <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
+			shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
 		};
 	};
 
@@ -756,7 +766,7 @@
 
 			lpddr2 {
 				compatible = "elpida,B8132B2PB-6D-F", "jedec,lpddr2-s4";
-				revision-id1 = <1>;
+				revision-id = <1 0>;
 				density = <2048>;
 				io-width = <16>;
 			};
@@ -970,7 +980,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		dock-hall-sensor {
+		switch-dock-hall-sensor {
 			label = "Lid";
 			gpios = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_LOW>;
 			linux,input-type = <EV_SW>;
@@ -980,7 +990,7 @@
 			wakeup-source;
 		};
 
-		power {
+		key-power {
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
@@ -989,7 +999,7 @@
 			wakeup-source;
 		};
 
-		volume-up {
+		key-volume-up {
 			label = "Volume Up";
 			gpios = <&gpio TEGRA_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
@@ -998,7 +1008,7 @@
 			wakeup-source;
 		};
 
-		volume-down {
+		key-volume-down {
 			label = "Volume Down";
 			gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
diff --git a/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts
index d2a3bf9d28bd..cb1190b77db3 100644
--- a/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts
@@ -209,7 +209,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wakeup {
+		key-wakeup {
 			label = "SODIMM pin 45 wakeup";
 			gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_WAKEUP>;
diff --git a/arch/arm/boot/dts/tegra20-colibri-iris.dts b/arch/arm/boot/dts/tegra20-colibri-iris.dts
index 00ecbbd5e9e1..53487cc21513 100644
--- a/arch/arm/boot/dts/tegra20-colibri-iris.dts
+++ b/arch/arm/boot/dts/tegra20-colibri-iris.dts
@@ -191,7 +191,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wakeup {
+		key-wakeup {
 			label = "SODIMM pin 45 wakeup";
 			gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_WAKEUP>;
diff --git a/arch/arm/boot/dts/tegra20-colibri.dtsi b/arch/arm/boot/dts/tegra20-colibri.dtsi
index 1eefb9ee4ac8..8ebd8afc857d 100644
--- a/arch/arm/boot/dts/tegra20-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra20-colibri.dtsi
@@ -691,7 +691,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		asix@1 {
+		ethernet@1 {
 			compatible = "usbb95,772b";
 			reg = <1>;
 			local-mac-address = [00 00 00 00 00 00];
diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts
index 79b6b79fab65..11f21aeba8e9 100644
--- a/arch/arm/boot/dts/tegra20-harmony.dts
+++ b/arch/arm/boot/dts/tegra20-harmony.dts
@@ -648,7 +648,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
index d53a175dc17a..48fe628c6d87 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -13,6 +13,8 @@
 	compatible = "compal,paz00", "nvidia,tegra20";
 
 	aliases {
+		mmc0 = &sdmmc4; /* eMMC */
+		mmc1 = &sdmmc1; /* MicroSD */
 		rtc0 = "/i2c@7000d000/tps6586x@34";
 		rtc1 = "/rtc@7000e000";
 		serial0 = &uarta;
@@ -558,7 +560,7 @@
 		status = "okay";
 	};
 
-	mmc@c8000000 {
+	sdmmc1: mmc@c8000000 {
 		status = "okay";
 		cd-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_LOW>;
 		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
@@ -566,7 +568,7 @@
 		bus-width = <4>;
 	};
 
-	mmc@c8000600 {
+	sdmmc4: mmc@c8000600 {
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
@@ -594,7 +596,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wakeup {
+		key-wakeup {
 			label = "Wakeup";
 			gpios = <&gpio TEGRA_GPIO(J, 7) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WAKEUP>;
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index c4a6a6a94559..5b4c5ef30996 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -800,14 +800,14 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			wakeup-source;
 		};
 
-		lid {
+		switch-lid {
 			label = "Lid";
 			gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
 			linux,input-type = <5>; /* EV_SW */
diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi
index de39c5465c0a..0e19bd0a847c 100644
--- a/arch/arm/boot/dts/tegra20-tamonten.dtsi
+++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi
@@ -183,8 +183,8 @@
 			};
 			conf_ata {
 				nvidia,pins = "ata", "atb", "atc", "atd", "ate",
-					"cdev1", "cdev2", "dap1", "dtb", "gma",
-					"gmb", "gmc", "gmd", "gme", "gpu7",
+					"cdev1", "cdev2", "dap1", "dtb", "dtf",
+					"gma", "gmb", "gmc", "gmd", "gme", "gpu7",
 					"gpv", "i2cp", "irrx", "irtx", "pta",
 					"rm", "slxa", "slxk", "spia", "spib",
 					"uac";
@@ -203,7 +203,7 @@
 			};
 			conf_crtp {
 				nvidia,pins = "crtp", "dap2", "dap3", "dap4",
-					"dtc", "dte", "dtf", "gpu", "sdio1",
+					"dtc", "dte", "gpu", "sdio1",
 					"slxc", "slxd", "spdi", "spdo", "spig",
 					"uda";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts
index 9d0c86711de2..dc51835423a9 100644
--- a/arch/arm/boot/dts/tegra20-trimslice.dts
+++ b/arch/arm/boot/dts/tegra20-trimslice.dts
@@ -388,7 +388,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(X, 6) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index b0a00970b61c..caa17e876e41 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -628,7 +628,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/tegra30-apalis-eval.dts
index 93b83b3c5655..ad968ff968d7 100644
--- a/arch/arm/boot/dts/tegra30-apalis-eval.dts
+++ b/arch/arm/boot/dts/tegra30-apalis-eval.dts
@@ -181,7 +181,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wakeup {
+		key-wakeup {
 			label = "WAKE1_MICO";
 			gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WAKEUP>;
diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts b/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
index fbfa75e53f32..c172fdb5e1ae 100644
--- a/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
+++ b/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
@@ -182,7 +182,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wakeup {
+		key-wakeup {
 			label = "WAKE1_MICO";
 			gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WAKEUP>;
diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
index 380f22a35821..a1bcd67fa505 100644
--- a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
@@ -993,7 +993,7 @@
 		touchscreen@41 {
 			compatible = "st,stmpe811";
 			reg = <0x41>;
-			irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
+			irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
 			interrupt-controller;
 			id = <0>;
 			blocks = <0x5>;
diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
index 9bdc4cb71449..99d7dad72d29 100644
--- a/arch/arm/boot/dts/tegra30-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
@@ -976,7 +976,7 @@
 		touchscreen@41 {
 			compatible = "st,stmpe811";
 			reg = <0x41>;
-			irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
+			irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
 			interrupt-controller;
 			id = <0>;
 			blocks = <0x5>;
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi
index 2c2ad2a38f04..ee683c5a9c62 100644
--- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi
+++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi
@@ -63,7 +63,7 @@
 	gpio@6000d000 {
 		init-mode-hog {
 			gpio-hog;
-			gpios =	<TEGRA_GPIO(DD, 7) GPIO_ACTIVE_HIGH>,
+			gpios = <TEGRA_GPIO(DD, 7) GPIO_ACTIVE_HIGH>,
 				<TEGRA_GPIO(CC, 6) GPIO_ACTIVE_HIGH>,
 				<TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
 			output-low;
@@ -820,7 +820,7 @@
 			vddio-supply = <&vdd_1v8>;
 
 			device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
-			shutdown-gpios =      <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
+			shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
 		};
 	};
 
@@ -833,7 +833,7 @@
 		status = "okay";
 
 		touchscreen@10 {
-			compatible ="elan,ektf3624";
+			compatible = "elan,ektf3624";
 			reg = <0x10>;
 
 			interrupt-parent = <&gpio>;
@@ -1124,7 +1124,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		hall-sensor {
+		switch-hall-sensor {
 			label = "Lid";
 			gpios = <&gpio TEGRA_GPIO(S, 6) GPIO_ACTIVE_LOW>;
 			linux,input-type = <EV_SW>;
@@ -1134,7 +1134,7 @@
 			wakeup-source;
 		};
 
-		power {
+		key-power {
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
@@ -1143,7 +1143,7 @@
 			wakeup-source;
 		};
 
-		volume-up {
+		key-volume-up {
 			label = "Volume Up";
 			gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
@@ -1152,7 +1152,7 @@
 			wakeup-source;
 		};
 
-		volume-down {
+		key-volume-down {
 			label = "Volume Down";
 			gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia.dtsi
index cd63e0ef7445..1b241f0542b8 100644
--- a/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia.dtsi
+++ b/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia.dtsi
@@ -25,7 +25,7 @@
 	gpio@6000d000 {
 		init-mode-3g-hog {
 			gpio-hog;
-			gpios =	<TEGRA_GPIO(D, 2) GPIO_ACTIVE_HIGH>,
+			gpios = <TEGRA_GPIO(D, 2) GPIO_ACTIVE_HIGH>,
 				<TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>,
 				<TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>,
 				<TEGRA_GPIO(P, 1) GPIO_ACTIVE_HIGH>,
diff --git a/arch/arm/boot/dts/tegra30-asus-tf700t.dts b/arch/arm/boot/dts/tegra30-asus-tf700t.dts
index 18a9bfa5e97b..1a331dec3cfe 100644
--- a/arch/arm/boot/dts/tegra30-asus-tf700t.dts
+++ b/arch/arm/boot/dts/tegra30-asus-tf700t.dts
@@ -742,7 +742,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			dsi-bridge@7 {
+			dsi@7 {
 				compatible = "toshiba,tc358768";
 				reg = <0x7>;
 
diff --git a/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi b/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi
index 85b43a86a26d..c27e70d8bf2b 100644
--- a/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi
+++ b/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi
@@ -1080,6 +1080,7 @@
 
 	serial@70006040 {
 		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 		status = "okay";
 
 		/* Broadcom GPS BCM47511 */
@@ -1087,6 +1088,7 @@
 
 	serial@70006200 {
 		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 		status = "okay";
 
 		nvidia,adjust-baud-rates = <0 9600 100>,
@@ -1509,7 +1511,7 @@
 		compatible = "gpio-keys";
 		interrupt-parent = <&gpio>;
 
-		dock-hall-sensor {
+		switch-dock-hall-sensor {
 			label = "Lid sensor";
 			gpios = <&gpio TEGRA_GPIO(S, 6) GPIO_ACTIVE_LOW>;
 			linux,input-type = <EV_SW>;
@@ -1519,7 +1521,7 @@
 			wakeup-source;
 		};
 
-		lineout-detect {
+		switch-lineout-detect {
 			label = "Audio dock line-out detect";
 			gpios = <&gpio TEGRA_GPIO(X, 3) GPIO_ACTIVE_LOW>;
 			linux,input-type = <EV_SW>;
@@ -1542,7 +1544,7 @@
 		compatible = "gpio-keys";
 		interrupt-parent = <&gpio>;
 
-		power {
+		key-power {
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
@@ -1551,7 +1553,7 @@
 			wakeup-source;
 		};
 
-		volume-up {
+		key-volume-up {
 			label = "Volume Up";
 			gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
@@ -1560,7 +1562,7 @@
 			wakeup-source;
 		};
 
-		volume-down {
+		key-volume-down {
 			label = "Volume Down";
 			gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index ba257ed36d9c..540530c983ff 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -685,7 +685,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "Power";
 			interrupt-parent = <&pmic>;
 			interrupts = <2 0>;
@@ -694,14 +694,14 @@
 			wakeup-source;
 		};
 
-		volume-down {
+		key-volume-down {
 			label = "Volume Down";
 			gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
 			debounce-interval = <10>;
 		};
 
-		volume-up {
+		key-volume-up {
 			label = "Volume Up";
 			gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
index 7d4a6ca4936a..8dbc15f9a9e4 100644
--- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
@@ -145,7 +145,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wakeup {
+		key-wakeup {
 			label = "SODIMM pin 45 wakeup";
 			gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_WAKEUP>;
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index be691a1c33a1..2867a138e011 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -239,7 +239,7 @@
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
 			spdif-in-pk6 {
-				nvidia,pins =	"spdif_in_pk6";
+				nvidia,pins = "spdif_in_pk6";
 				nvidia,function = "hda";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -364,7 +364,7 @@
 			};
 			/* Multiplexed and therefore disabled */
 			cam-mclk-pcc0 {
-				nvidia,pins =	"cam_mclk_pcc0";
+				nvidia,pins = "cam_mclk_pcc0";
 				nvidia,function = "vi_alt3";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
@@ -511,7 +511,7 @@
 
 			/* Colibri USBC_DET */
 			spdif-out-pk5 {
-				nvidia,pins =	"spdif_out_pk5";
+				nvidia,pins = "spdif_out_pk5";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -849,7 +849,7 @@
 		touchscreen@41 {
 			compatible = "st,stmpe811";
 			reg = <0x41>;
-			irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
+			irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
 			interrupt-controller;
 			id = <0>;
 			blocks = <0x5>;
@@ -960,7 +960,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		asix@1 {
+		ethernet@1 {
 			compatible = "usbb95,772b";
 			reg = <1>;
 			local-mac-address = [00 00 00 00 00 00];
diff --git a/arch/arm/boot/dts/tegra30-ouya.dts b/arch/arm/boot/dts/tegra30-ouya.dts
index a5cfbab5f565..b7acea39b942 100644
--- a/arch/arm/boot/dts/tegra30-ouya.dts
+++ b/arch/arm/boot/dts/tegra30-ouya.dts
@@ -4553,7 +4553,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		smsc@2 { /* SMSC 10/100T Ethernet Controller */
+		ethernet@2 { /* SMSC 10/100T Ethernet Controller */
 			compatible = "usb424,9e00";
 			reg = <2>;
 			local-mac-address = [00 11 22 33 44 55];
@@ -4764,7 +4764,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
 			debounce-interval = <10>;
 			linux,code = <KEY_POWER>;
diff --git a/arch/arm/boot/dts/tegra30-pegatron-chagall.dts b/arch/arm/boot/dts/tegra30-pegatron-chagall.dts
index f4b2d4218849..7c81f0205549 100644
--- a/arch/arm/boot/dts/tegra30-pegatron-chagall.dts
+++ b/arch/arm/boot/dts/tegra30-pegatron-chagall.dts
@@ -1103,6 +1103,7 @@
 
 	uartb: serial@70006040 {
 		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 		status = "okay";
 
 		/* Broadcom GPS BCM47511 */
@@ -1110,6 +1111,7 @@
 
 	uartc: serial@70006200 {
 		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 		status = "okay";
 
 		nvidia,adjust-baud-rates = <0 9600 100>,
@@ -2653,7 +2655,7 @@
 		compatible = "gpio-keys";
 		interrupt-parent = <&gpio>;
 
-		dock-insert {
+		switch-dock-insert {
 			label = "Chagall Dock";
 			gpios = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_LOW>;
 			linux,input-type = <EV_SW>;
@@ -2663,7 +2665,7 @@
 			wakeup-source;
 		};
 
-		lineout-detect {
+		switch-lineout-detect {
 			label = "Audio dock line-out detect";
 			gpios = <&gpio TEGRA_GPIO(S, 3) GPIO_ACTIVE_LOW>;
 			linux,input-type = <EV_SW>;
@@ -2686,7 +2688,7 @@
 		compatible = "gpio-keys";
 		interrupt-parent = <&gpio>;
 
-		power {
+		key-power {
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
@@ -2695,7 +2697,7 @@
 			wakeup-source;
 		};
 
-		volume-up {
+		key-volume-up {
 			label = "Volume Up";
 			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
@@ -2704,7 +2706,7 @@
 			wakeup-source;
 		};
 
-		volume-down {
+		key-volume-down {
 			label = "Volume Down";
 			gpios = <&gpio TEGRA_GPIO(Q, 1) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
diff --git a/arch/arm/boot/dts/uniphier-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ld4-ref.dts
index c46c2e8a10a7..e007db084787 100644
--- a/arch/arm/boot/dts/uniphier-ld4-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ld4-ref.dts
@@ -36,11 +36,11 @@
 };
 
 &ethsc {
-	interrupts = <1 8>;
+	interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 };
 
 &serialsc {
-	interrupts = <1 8>;
+	interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 };
 
 &serial0 {
@@ -56,7 +56,7 @@
 };
 
 &gpio {
-	xirq1 {
+	xirq1-hog {
 		gpio-hog;
 		gpios = <UNIPHIER_GPIO_IRQ(1) 0>;
 		input;
diff --git a/arch/arm/boot/dts/uniphier-ld4.dtsi b/arch/arm/boot/dts/uniphier-ld4.dtsi
index b52957ccda0d..9dceff12a633 100644
--- a/arch/arm/boot/dts/uniphier-ld4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ld4.dtsi
@@ -6,6 +6,7 @@
 //   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
 
 #include <dt-bindings/gpio/uniphier-gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
 	compatible = "socionext,uniphier-ld4";
@@ -55,7 +56,8 @@
 			compatible = "socionext,uniphier-system-cache";
 			reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
 			      <0x506c0000 0x400>;
-			interrupts = <0 174 4>, <0 175 4>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
 			cache-unified;
 			cache-size = <(512 * 1024)>;
 			cache-sets = <256>;
@@ -69,7 +71,7 @@
 			reg = <0x54006000 0x100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 39 4>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_spi0>;
 			clocks = <&peri_clk 11>;
@@ -80,7 +82,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006800 0x40>;
-			interrupts = <0 33 4>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart0>;
 			clocks = <&peri_clk 0>;
@@ -91,7 +93,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006900 0x40>;
-			interrupts = <0 35 4>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart1>;
 			clocks = <&peri_clk 1>;
@@ -102,7 +104,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006a00 0x40>;
-			interrupts = <0 37 4>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart2>;
 			clocks = <&peri_clk 2>;
@@ -113,7 +115,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006b00 0x40>;
-			interrupts = <0 29 4>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart3>;
 			clocks = <&peri_clk 3>;
@@ -140,7 +142,7 @@
 			reg = <0x58400000 0x40>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 41 1>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_EDGE_RISING>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c0>;
 			clocks = <&peri_clk 4>;
@@ -154,7 +156,7 @@
 			reg = <0x58480000 0x40>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 42 1>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_EDGE_RISING>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c1>;
 			clocks = <&peri_clk 5>;
@@ -168,7 +170,7 @@
 			reg = <0x58500000 0x40>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 43 1>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_EDGE_RISING>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c2>;
 			clocks = <&peri_clk 6>;
@@ -182,7 +184,7 @@
 			reg = <0x58580000 0x40>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 44 1>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c3>;
 			clocks = <&peri_clk 7>;
@@ -240,8 +242,13 @@
 		dmac: dma-controller@5a000000 {
 			compatible = "socionext,uniphier-mio-dmac";
 			reg = <0x5a000000 0x1000>;
-			interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>,
-				     <0 71 4>, <0 72 4>, <0 73 4>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&mio_clk 7>;
 			resets = <&mio_rst 7>;
 			#dma-cells = <1>;
@@ -251,7 +258,7 @@
 			compatible = "socionext,uniphier-sd-v2.91";
 			status = "disabled";
 			reg = <0x5a400000 0x200>;
-			interrupts = <0 76 4>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default", "uhs";
 			pinctrl-0 = <&pinctrl_sd>;
 			pinctrl-1 = <&pinctrl_sd_uhs>;
@@ -271,7 +278,7 @@
 			compatible = "socionext,uniphier-sd-v2.91";
 			status = "disabled";
 			reg = <0x5a500000 0x200>;
-			interrupts = <0 78 4>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_emmc>;
 			clocks = <&mio_clk 1>;
@@ -289,7 +296,7 @@
 			compatible = "socionext,uniphier-ehci", "generic-ehci";
 			status = "disabled";
 			reg = <0x5a800100 0x100>;
-			interrupts = <0 80 4>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb0>;
 			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>,
@@ -303,7 +310,7 @@
 			compatible = "socionext,uniphier-ehci", "generic-ehci";
 			status = "disabled";
 			reg = <0x5a810100 0x100>;
-			interrupts = <0 81 4>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb1>;
 			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>,
@@ -317,7 +324,7 @@
 			compatible = "socionext,uniphier-ehci", "generic-ehci";
 			status = "disabled";
 			reg = <0x5a820100 0x100>;
-			interrupts = <0 82 4>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb2>;
 			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 10>,
@@ -358,14 +365,16 @@
 		timer@60000200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x60000200 0x20>;
-			interrupts = <1 11 0x104>;
+			interrupts = <GIC_PPI 11
+				(GIC_CPU_MASK_RAW(1) | IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&arm_timer_clk>;
 		};
 
 		timer@60000600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x60000600 0x20>;
-			interrupts = <1 13 0x104>;
+			interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_RAW(1) | IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&arm_timer_clk>;
 		};
 
@@ -407,7 +416,7 @@
 			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 65 4>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand>;
 			clock-names = "nand", "nand_x", "ecc";
diff --git a/arch/arm/boot/dts/uniphier-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ld6b-ref.dts
index 5bc7fe11b517..223a78b4a761 100644
--- a/arch/arm/boot/dts/uniphier-ld6b-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ld6b-ref.dts
@@ -40,11 +40,11 @@
 };
 
 &ethsc {
-	interrupts = <4 8>;
+	interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 };
 
 &serialsc {
-	interrupts = <4 8>;
+	interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 };
 
 &serial0 {
@@ -60,7 +60,7 @@
 };
 
 &gpio {
-	xirq4 {
+	xirq4-hog {
 		gpio-hog;
 		gpios = <UNIPHIER_GPIO_IRQ(4) 0>;
 		input;
diff --git a/arch/arm/boot/dts/uniphier-pinctrl.dtsi b/arch/arm/boot/dts/uniphier-pinctrl.dtsi
index c0fd029b37e5..f909ec2e5333 100644
--- a/arch/arm/boot/dts/uniphier-pinctrl.dtsi
+++ b/arch/arm/boot/dts/uniphier-pinctrl.dtsi
@@ -196,11 +196,21 @@
 		function = "usb0";
 	};
 
+	pinctrl_usb0_device: usb0-device {
+		groups = "usb0_device";
+		function = "usb0";
+	};
+
 	pinctrl_usb1: usb1 {
 		groups = "usb1";
 		function = "usb1";
 	};
 
+	pinctrl_usb1_device: usb1-device {
+		groups = "usb1_device";
+		function = "usb1";
+	};
+
 	pinctrl_usb2: usb2 {
 		groups = "usb2";
 		function = "usb2";
diff --git a/arch/arm/boot/dts/uniphier-pro4-ace.dts b/arch/arm/boot/dts/uniphier-pro4-ace.dts
index 27ff2b7b9d0e..6baee4410d9c 100644
--- a/arch/arm/boot/dts/uniphier-pro4-ace.dts
+++ b/arch/arm/boot/dts/uniphier-pro4-ace.dts
@@ -99,3 +99,11 @@
 &usb1 {
 	status = "okay";
 };
+
+&ahci0 {
+	status = "okay";
+};
+
+&ahci1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-pro4-ref.dts b/arch/arm/boot/dts/uniphier-pro4-ref.dts
index 3b9b61314d01..d2ce5c039865 100644
--- a/arch/arm/boot/dts/uniphier-pro4-ref.dts
+++ b/arch/arm/boot/dts/uniphier-pro4-ref.dts
@@ -39,11 +39,11 @@
 };
 
 &ethsc {
-	interrupts = <2 8>;
+	interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 };
 
 &serialsc {
-	interrupts = <2 8>;
+	interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 };
 
 &serial0 {
@@ -59,7 +59,7 @@
 };
 
 &gpio {
-	xirq2 {
+	xirq2-hog {
 		gpio-hog;
 		gpios = <UNIPHIER_GPIO_IRQ(2) 0>;
 		input;
@@ -108,3 +108,11 @@
 		reg = <0>;
 	};
 };
+
+&ahci0 {
+	status = "okay";
+};
+
+&ahci1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi
index a53b73ee93e9..a309e64c57c8 100644
--- a/arch/arm/boot/dts/uniphier-pro4.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro4.dtsi
@@ -6,6 +6,7 @@
 //   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
 
 #include <dt-bindings/gpio/uniphier-gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
 	compatible = "socionext,uniphier-pro4";
@@ -63,7 +64,8 @@
 			compatible = "socionext,uniphier-system-cache";
 			reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
 			      <0x506c0000 0x400>;
-			interrupts = <0 174 4>, <0 175 4>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
 			cache-unified;
 			cache-size = <(768 * 1024)>;
 			cache-sets = <256>;
@@ -77,7 +79,7 @@
 			reg = <0x54006000 0x100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 39 4>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_spi0>;
 			clocks = <&peri_clk 11>;
@@ -88,7 +90,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006800 0x40>;
-			interrupts = <0 33 4>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart0>;
 			clocks = <&peri_clk 0>;
@@ -99,7 +101,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006900 0x40>;
-			interrupts = <0 35 4>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart1>;
 			clocks = <&peri_clk 1>;
@@ -110,7 +112,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006a00 0x40>;
-			interrupts = <0 37 4>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart2>;
 			clocks = <&peri_clk 2>;
@@ -121,7 +123,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006b00 0x40>;
-			interrupts = <0 177 4>;
+			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart3>;
 			clocks = <&peri_clk 3>;
@@ -148,7 +150,7 @@
 			reg = <0x58780000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 41 4>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c0>;
 			clocks = <&peri_clk 4>;
@@ -162,7 +164,7 @@
 			reg = <0x58781000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 42 4>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c1>;
 			clocks = <&peri_clk 5>;
@@ -176,7 +178,7 @@
 			reg = <0x58782000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 43 4>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c2>;
 			clocks = <&peri_clk 6>;
@@ -190,7 +192,7 @@
 			reg = <0x58783000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 44 4>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c3>;
 			clocks = <&peri_clk 7>;
@@ -206,7 +208,7 @@
 			reg = <0x58785000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 25 4>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&peri_clk 9>;
 			resets = <&peri_rst 9>;
 			clock-frequency = <400000>;
@@ -218,7 +220,7 @@
 			reg = <0x58786000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 26 4>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&peri_clk 10>;
 			resets = <&peri_rst 10>;
 			clock-frequency = <400000>;
@@ -274,8 +276,14 @@
 		dmac: dma-controller@5a000000 {
 			compatible = "socionext,uniphier-mio-dmac";
 			reg = <0x5a000000 0x1000>;
-			interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>,
-				     <0 71 4>, <0 72 4>, <0 73 4>, <0 74 4>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&mio_clk 7>;
 			resets = <&mio_rst 7>;
 			#dma-cells = <1>;
@@ -285,7 +293,7 @@
 			compatible = "socionext,uniphier-sd-v2.91";
 			status = "disabled";
 			reg = <0x5a400000 0x200>;
-			interrupts = <0 76 4>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default", "uhs";
 			pinctrl-0 = <&pinctrl_sd>;
 			pinctrl-1 = <&pinctrl_sd_uhs>;
@@ -305,7 +313,7 @@
 			compatible = "socionext,uniphier-sd-v2.91";
 			status = "disabled";
 			reg = <0x5a500000 0x200>;
-			interrupts = <0 78 4>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_emmc>;
 			clocks = <&mio_clk 1>;
@@ -323,7 +331,7 @@
 			compatible = "socionext,uniphier-sd-v2.91";
 			status = "disabled";
 			reg = <0x5a600000 0x200>;
-			interrupts = <0 85 4>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_sd1>;
 			clocks = <&mio_clk 2>;
@@ -339,7 +347,7 @@
 			compatible = "socionext,uniphier-ehci", "generic-ehci";
 			status = "disabled";
 			reg = <0x5a800100 0x100>;
-			interrupts = <0 80 4>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb2>;
 			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>,
@@ -355,7 +363,7 @@
 			compatible = "socionext,uniphier-ehci", "generic-ehci";
 			status = "disabled";
 			reg = <0x5a810100 0x100>;
-			interrupts = <0 81 4>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb3>;
 			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>,
@@ -376,7 +384,7 @@
 				compatible = "socionext,uniphier-pro4-pinctrl";
 			};
 
-			usb-phy {
+			usb-controller {
 				compatible = "socionext,uniphier-pro4-usb2-phy";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -403,6 +411,11 @@
 					vbus-supply = <&usb1_vbus>;
 				};
 			};
+
+			sg_clk: clock {
+				compatible = "socionext,uniphier-pro4-sg-clock";
+				#clock-cells = <1>;
+			};
 		};
 
 		soc-glue@5f900000 {
@@ -431,7 +444,7 @@
 		xdmac: dma-controller@5fc10000 {
 			compatible = "socionext,uniphier-xdmac";
 			reg = <0x5fc10000 0x5300>;
-			interrupts = <0 188 4>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
 			dma-channels = <16>;
 			#dma-cells = <2>;
 		};
@@ -446,14 +459,16 @@
 		timer@60000200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x60000200 0x20>;
-			interrupts = <1 11 0x304>;
+			interrupts = <GIC_PPI 11
+				(GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&arm_timer_clk>;
 		};
 
 		timer@60000600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x60000600 0x20>;
-			interrupts = <1 13 0x304>;
+			interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&arm_timer_clk>;
 		};
 
@@ -485,7 +500,7 @@
 			compatible = "socionext,uniphier-pro4-ave4";
 			status = "disabled";
 			reg = <0x65000000 0x8500>;
-			interrupts = <0 66 4>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_ether_rgmii>;
 			clock-names = "gio", "ether", "ether-gb", "ether-phy";
@@ -503,12 +518,105 @@
 			};
 		};
 
+		ahci0: sata@65600000 {
+			compatible = "socionext,uniphier-pro4-ahci",
+				     "generic-ahci";
+			status = "disabled";
+			reg = <0x65600000 0x10000>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sys_clk 12>, <&sys_clk 28>;
+			resets = <&sys_rst 12>, <&sys_rst 28>, <&ahci0_rst 3>;
+			ports-implemented = <1>;
+			phys = <&ahci0_phy>;
+			assigned-clocks = <&sg_clk 0>;
+			assigned-clock-rates = <25000000>;
+		};
+
+		sata-controller@65700000 {
+			compatible = "socionext,uniphier-pxs2-ahci-glue",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65700000 0x100>;
+
+			ahci0_rst: reset-controller@0 {
+				compatible = "socionext,uniphier-pro4-ahci-reset";
+				reg = <0x0 0x4>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 28>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 28>;
+				#reset-cells = <1>;
+			};
+
+			ahci0_phy: sata-phy@10 {
+				compatible = "socionext,uniphier-pro4-ahci-phy";
+				reg = <0x10 0x40>;
+				clock-names = "link", "gio";
+				clocks = <&sys_clk 28>, <&sys_clk 12>;
+				reset-names = "link", "gio", "phy",
+					      "pm", "tx", "rx";
+				resets = <&sys_rst 28>, <&sys_rst 12>,
+					 <&sys_rst 30>,
+					 <&ahci0_rst 0>, <&ahci0_rst 1>,
+					 <&ahci0_rst 2>;
+				#phy-cells = <0>;
+			};
+		};
+
+		ahci1: sata@65800000 {
+			compatible = "socionext,uniphier-pro4-ahci",
+				     "generic-ahci";
+			status = "disabled";
+			reg = <0x65800000 0x10000>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sys_clk 12>, <&sys_clk 29>;
+			resets = <&sys_rst 12>, <&sys_rst 29>, <&ahci1_rst 3>;
+			ports-implemented = <1>;
+			phys = <&ahci1_phy>;
+			assigned-clocks = <&sg_clk 0>;
+			assigned-clock-rates = <25000000>;
+		};
+
+		sata-controller@65900000 {
+			compatible = "socionext,uniphier-pro4-ahci-glue",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65900000 0x100>;
+
+			ahci1_rst: reset-controller@0 {
+				compatible = "socionext,uniphier-pro4-ahci-reset";
+				reg = <0x0 0x4>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 29>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 29>;
+				#reset-cells = <1>;
+			};
+
+			ahci1_phy: sata-phy@10 {
+				compatible = "socionext,uniphier-pro4-ahci-phy";
+				reg = <0x10 0x40>;
+				clock-names = "link", "gio";
+				clocks = <&sys_clk 29>, <&sys_clk 12>;
+				reset-names = "link", "gio", "phy",
+					      "pm", "tx", "rx";
+				resets = <&sys_rst 29>, <&sys_rst 12>,
+					 <&sys_rst 30>,
+					 <&ahci1_rst 0>, <&ahci1_rst 1>,
+					 <&ahci1_rst 2>;
+				#phy-cells = <0>;
+			};
+		};
+
 		usb0: usb@65a00000 {
 			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
 			status = "disabled";
 			reg = <0x65a00000 0xcd00>;
 			interrupt-names = "host", "peripheral";
-			interrupts = <0 134 4>, <0 135 4>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb0>;
 			clock-names = "ref", "bus_early", "suspend";
@@ -518,7 +626,7 @@
 			dr_mode = "host";
 		};
 
-		usb-glue@65b00000 {
+		usb-controller@65b00000 {
 			compatible = "socionext,uniphier-pro4-dwc3-glue",
 				     "simple-mfd";
 			#address-cells = <1>;
@@ -561,7 +669,8 @@
 			status = "disabled";
 			reg = <0x65c00000 0xcd00>;
 			interrupt-names = "host", "peripheral";
-			interrupts = <0 137 4>, <0 138 4>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb1>;
 			clock-names = "ref", "bus_early", "suspend";
@@ -571,7 +680,7 @@
 			dr_mode = "host";
 		};
 
-		usb-glue@65d00000 {
+		usb-controller@65d00000 {
 			compatible = "socionext,uniphier-pro4-dwc3-glue",
 				     "simple-mfd";
 			#address-cells = <1>;
@@ -605,7 +714,7 @@
 			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 65 4>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand>;
 			clock-names = "nand", "nand_x", "ecc";
diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi
index 3525125832dd..100edd7438d8 100644
--- a/arch/arm/boot/dts/uniphier-pro5.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro5.dtsi
@@ -5,6 +5,8 @@
 // Copyright (C) 2015-2016 Socionext Inc.
 //   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
 
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
 / {
 	compatible = "socionext,uniphier-pro5";
 	#address-cells = <1>;
@@ -135,7 +137,8 @@
 			compatible = "socionext,uniphier-system-cache";
 			reg = <0x500c0000 0x2000>, <0x503c0100 0x8>,
 			      <0x506c0000 0x400>;
-			interrupts = <0 190 4>, <0 191 4>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
 			cache-unified;
 			cache-size = <(2 * 1024 * 1024)>;
 			cache-sets = <512>;
@@ -148,7 +151,8 @@
 			compatible = "socionext,uniphier-system-cache";
 			reg = <0x500c8000 0x2000>, <0x503c8100 0x8>,
 			      <0x506c8000 0x400>;
-			interrupts = <0 174 4>, <0 175 4>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
 			cache-unified;
 			cache-size = <(2 * 1024 * 1024)>;
 			cache-sets = <512>;
@@ -162,7 +166,7 @@
 			reg = <0x54006000 0x100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 39 4>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_spi0>;
 			clocks = <&peri_clk 11>;
@@ -175,7 +179,7 @@
 			reg = <0x54006100 0x100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 216 4>;
+			interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_spi1>;
 			clocks = <&peri_clk 11>;	/* common with spi0 */
@@ -186,7 +190,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006800 0x40>;
-			interrupts = <0 33 4>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart0>;
 			clocks = <&peri_clk 0>;
@@ -197,7 +201,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006900 0x40>;
-			interrupts = <0 35 4>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart1>;
 			clocks = <&peri_clk 1>;
@@ -208,7 +212,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006a00 0x40>;
-			interrupts = <0 37 4>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart2>;
 			clocks = <&peri_clk 2>;
@@ -219,7 +223,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006b00 0x40>;
-			interrupts = <0 177 4>;
+			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart3>;
 			clocks = <&peri_clk 3>;
@@ -246,7 +250,7 @@
 			reg = <0x58780000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 41 4>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c0>;
 			clocks = <&peri_clk 4>;
@@ -260,7 +264,7 @@
 			reg = <0x58781000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 42 4>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c1>;
 			clocks = <&peri_clk 5>;
@@ -274,7 +278,7 @@
 			reg = <0x58782000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 43 4>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c2>;
 			clocks = <&peri_clk 6>;
@@ -288,7 +292,7 @@
 			reg = <0x58783000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 44 4>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c3>;
 			clocks = <&peri_clk 7>;
@@ -304,7 +308,7 @@
 			reg = <0x58785000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 25 4>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&peri_clk 9>;
 			resets = <&peri_rst 9>;
 			clock-frequency = <400000>;
@@ -316,7 +320,7 @@
 			reg = <0x58786000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 26 4>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&peri_clk 10>;
 			resets = <&peri_rst 10>;
 			clock-frequency = <400000>;
@@ -415,7 +419,7 @@
 		xdmac: dma-controller@5fc10000 {
 			compatible = "socionext,uniphier-xdmac";
 			reg = <0x5fc10000 0x5300>;
-			interrupts = <0 188 4>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
 			dma-channels = <16>;
 			#dma-cells = <2>;
 		};
@@ -430,14 +434,16 @@
 		timer@60000200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x60000200 0x20>;
-			interrupts = <1 11 0x304>;
+			interrupts = <GIC_PPI 11
+				(GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&arm_timer_clk>;
 		};
 
 		timer@60000600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x60000600 0x20>;
-			interrupts = <1 13 0x304>;
+			interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&arm_timer_clk>;
 		};
 
@@ -470,7 +476,7 @@
 			status = "disabled";
 			reg = <0x65a00000 0xcd00>;
 			interrupt-names = "host";
-			interrupts = <0 134 4>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb0>;
 			clock-names = "ref", "bus_early", "suspend";
@@ -480,7 +486,7 @@
 			dr_mode = "host";
 		};
 
-		usb-glue@65b00000 {
+		usb-controller@65b00000 {
 			compatible = "socionext,uniphier-pro5-dwc3-glue",
 				     "simple-mfd";
 			#address-cells = <1>;
@@ -534,7 +540,7 @@
 			status = "disabled";
 			reg = <0x65c00000 0xcd00>;
 			interrupt-names = "host";
-			interrupts = <0 137 4>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb2>;
 			clock-names = "ref", "bus_early", "suspend";
@@ -544,7 +550,7 @@
 			dr_mode = "host";
 		};
 
-		usb-glue@65d00000 {
+		usb-controller@65d00000 {
 			compatible = "socionext,uniphier-pro5-dwc3-glue",
 				     "simple-mfd";
 			#address-cells = <1>;
@@ -614,8 +620,7 @@
 		};
 
 		pcie_ep: pcie-ep@66000000 {
-			compatible = "socionext,uniphier-pro5-pcie-ep",
-				     "snps,dw-pcie-ep";
+			compatible = "socionext,uniphier-pro5-pcie-ep";
 			status = "disabled";
 			reg-names = "dbi", "dbi2", "link", "addr_space";
 			reg = <0x66000000 0x1000>, <0x66001000 0x1000>,
@@ -650,7 +655,7 @@
 			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 65 4>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand>;
 			clock-names = "nand", "nand_x", "ecc";
@@ -663,7 +668,7 @@
 			compatible = "socionext,uniphier-sd-v3.1";
 			status = "disabled";
 			reg = <0x68400000 0x800>;
-			interrupts = <0 78 4>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_emmc>;
 			clocks = <&sd_clk 1>;
@@ -679,7 +684,7 @@
 			compatible = "socionext,uniphier-sd-v3.1";
 			status = "disabled";
 			reg = <0x68800000 0x800>;
-			interrupts = <0 76 4>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default", "uhs";
 			pinctrl-0 = <&pinctrl_sd>;
 			pinctrl-1 = <&pinctrl_sd_uhs>;
diff --git a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts
index 759384b60663..5f18b926c50a 100644
--- a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts
+++ b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts
@@ -99,3 +99,7 @@
 &usb1 {
 	status = "okay";
 };
+
+&ahci {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi
index e81e5937a60a..ca4dccf56a67 100644
--- a/arch/arm/boot/dts/uniphier-pxs2.dtsi
+++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi
@@ -6,6 +6,7 @@
 //   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
 
 #include <dt-bindings/gpio/uniphier-gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -161,7 +162,10 @@
 			compatible = "socionext,uniphier-system-cache";
 			reg = <0x500c0000 0x2000>, <0x503c0100 0x8>,
 			      <0x506c0000 0x400>;
-			interrupts = <0 174 4>, <0 175 4>, <0 190 4>, <0 191 4>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
 			cache-unified;
 			cache-size = <(1280 * 1024)>;
 			cache-sets = <512>;
@@ -175,7 +179,7 @@
 			reg = <0x54006000 0x100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 39 4>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_spi0>;
 			clocks = <&peri_clk 11>;
@@ -188,7 +192,7 @@
 			reg = <0x54006100 0x100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 216 4>;
+			interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_spi1>;
 			clocks = <&peri_clk 12>;
@@ -199,7 +203,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006800 0x40>;
-			interrupts = <0 33 4>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart0>;
 			clocks = <&peri_clk 0>;
@@ -210,7 +214,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006900 0x40>;
-			interrupts = <0 35 4>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart1>;
 			clocks = <&peri_clk 1>;
@@ -221,7 +225,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006a00 0x40>;
-			interrupts = <0 37 4>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart2>;
 			clocks = <&peri_clk 2>;
@@ -232,7 +236,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006b00 0x40>;
-			interrupts = <0 177 4>;
+			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart3>;
 			clocks = <&peri_clk 3>;
@@ -259,7 +263,7 @@
 		audio@56000000 {
 			compatible = "socionext,uniphier-pxs2-aio";
 			reg = <0x56000000 0x80000>;
-			interrupts = <0 144 4>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_ain1>,
 				    <&pinctrl_ain2>,
@@ -317,7 +321,7 @@
 			reg = <0x58780000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 41 4>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c0>;
 			clocks = <&peri_clk 4>;
@@ -331,7 +335,7 @@
 			reg = <0x58781000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 42 4>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c1>;
 			clocks = <&peri_clk 5>;
@@ -345,7 +349,7 @@
 			reg = <0x58782000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 43 4>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c2>;
 			clocks = <&peri_clk 6>;
@@ -359,7 +363,7 @@
 			reg = <0x58783000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 44 4>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c3>;
 			clocks = <&peri_clk 7>;
@@ -373,7 +377,7 @@
 			reg = <0x58784000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 45 4>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&peri_clk 8>;
 			resets = <&peri_rst 8>;
 			clock-frequency = <400000>;
@@ -385,7 +389,7 @@
 			reg = <0x58785000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 25 4>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&peri_clk 9>;
 			resets = <&peri_rst 9>;
 			clock-frequency = <400000>;
@@ -397,7 +401,7 @@
 			reg = <0x58786000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 26 4>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&peri_clk 10>;
 			resets = <&peri_rst 10>;
 			clock-frequency = <400000>;
@@ -454,7 +458,7 @@
 			compatible = "socionext,uniphier-sd-v3.1.1";
 			status = "disabled";
 			reg = <0x5a000000 0x800>;
-			interrupts = <0 78 4>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_emmc>;
 			clocks = <&sd_clk 1>;
@@ -470,7 +474,7 @@
 			compatible = "socionext,uniphier-sd-v3.1.1";
 			status = "disabled";
 			reg = <0x5a400000 0x800>;
-			interrupts = <0 76 4>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default", "uhs";
 			pinctrl-0 = <&pinctrl_sd>;
 			pinctrl-1 = <&pinctrl_sd_uhs>;
@@ -515,7 +519,7 @@
 		xdmac: dma-controller@5fc10000 {
 			compatible = "socionext,uniphier-xdmac";
 			reg = <0x5fc10000 0x5300>;
-			interrupts = <0 188 4>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
 			dma-channels = <16>;
 			#dma-cells = <2>;
 		};
@@ -530,14 +534,16 @@
 		timer@60000200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x60000200 0x20>;
-			interrupts = <1 11 0xf04>;
+			interrupts = <GIC_PPI 11
+				(GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&arm_timer_clk>;
 		};
 
 		timer@60000600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x60000600 0x20>;
-			interrupts = <1 13 0xf04>;
+			interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&arm_timer_clk>;
 		};
 
@@ -564,9 +570,9 @@
 				#reset-cells = <1>;
 			};
 
-			pvtctl: pvtctl {
+			pvtctl: thermal-sensor {
 				compatible = "socionext,uniphier-pxs2-thermal";
-				interrupts = <0 3 4>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 				#thermal-sensor-cells = <0>;
 				socionext,tmod-calibration = <0x0f86 0x6844>;
 			};
@@ -576,7 +582,7 @@
 			compatible = "socionext,uniphier-pxs2-ave4";
 			status = "disabled";
 			reg = <0x65000000 0x8500>;
-			interrupts = <0 66 4>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_ether_rgmii>;
 			clock-names = "ether";
@@ -593,12 +599,52 @@
 			};
 		};
 
+		ahci: sata@65600000 {
+			compatible = "socionext,uniphier-pxs2-ahci",
+				     "generic-ahci";
+			status = "disabled";
+			reg = <0x65600000 0x10000>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sys_clk 28>;
+			resets = <&sys_rst 28>, <&ahci_rst 0>;
+			ports-implemented = <1>;
+			phys = <&ahci_phy>;
+		};
+
+		sata-controller@65700000 {
+			compatible = "socionext,uniphier-pxs2-ahci-glue",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65700000 0x100>;
+
+			ahci_rst: reset-controller@0 {
+				compatible = "socionext,uniphier-pxs2-ahci-reset";
+				reg = <0x0 0x4>;
+				clock-names = "link";
+				clocks = <&sys_clk 28>;
+				reset-names = "link";
+				resets = <&sys_rst 28>;
+				#reset-cells = <1>;
+			};
+
+			ahci_phy: sata-phy@10 {
+				compatible = "socionext,uniphier-pxs2-ahci-phy";
+				reg = <0x10 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 28>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 28>, <&sys_rst 30>;
+				#phy-cells = <0>;
+			};
+		};
+
 		usb0: usb@65a00000 {
 			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
 			status = "disabled";
 			reg = <0x65a00000 0xcd00>;
-			interrupt-names = "host", "peripheral";
-			interrupts = <0 134 4>, <0 135 4>;
+			interrupt-names = "dwc_usb3";
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>;
 			clock-names = "ref", "bus_early", "suspend";
@@ -609,7 +655,7 @@
 			dr_mode = "host";
 		};
 
-		usb-glue@65b00000 {
+		usb-controller@65b00000 {
 			compatible = "socionext,uniphier-pxs2-dwc3-glue",
 				     "simple-mfd";
 			#address-cells = <1>;
@@ -693,8 +739,8 @@
 			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
 			status = "disabled";
 			reg = <0x65c00000 0xcd00>;
-			interrupt-names = "host", "peripheral";
-			interrupts = <0 137 4>, <0 138 4>;
+			interrupt-names = "dwc_usb3";
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>;
 			clock-names = "ref", "bus_early", "suspend";
@@ -704,7 +750,7 @@
 			dr_mode = "host";
 		};
 
-		usb-glue@65d00000 {
+		usb-controller@65d00000 {
 			compatible = "socionext,uniphier-pxs2-dwc3-glue",
 				     "simple-mfd";
 			#address-cells = <1>;
@@ -780,7 +826,7 @@
 			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 65 4>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand>;
 			clock-names = "nand", "nand_x", "ecc";
diff --git a/arch/arm/boot/dts/uniphier-sld8-ref.dts b/arch/arm/boot/dts/uniphier-sld8-ref.dts
index 6db949ec7411..2446f9e15360 100644
--- a/arch/arm/boot/dts/uniphier-sld8-ref.dts
+++ b/arch/arm/boot/dts/uniphier-sld8-ref.dts
@@ -36,11 +36,11 @@
 };
 
 &ethsc {
-	interrupts = <0 8>;
+	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 };
 
 &serialsc {
-	interrupts = <0 8>;
+	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 };
 
 &serial0 {
@@ -56,7 +56,7 @@
 };
 
 &gpio {
-	xirq0 {
+	xirq0-hog {
 		gpio-hog;
 		gpios = <UNIPHIER_GPIO_IRQ(0) 0>;
 		input;
diff --git a/arch/arm/boot/dts/uniphier-sld8.dtsi b/arch/arm/boot/dts/uniphier-sld8.dtsi
index 96a766deb8d1..67b12dfe513b 100644
--- a/arch/arm/boot/dts/uniphier-sld8.dtsi
+++ b/arch/arm/boot/dts/uniphier-sld8.dtsi
@@ -6,6 +6,7 @@
 //   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
 
 #include <dt-bindings/gpio/uniphier-gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
 	compatible = "socionext,uniphier-sld8";
@@ -55,7 +56,8 @@
 			compatible = "socionext,uniphier-system-cache";
 			reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
 			      <0x506c0000 0x400>;
-			interrupts = <0 174 4>, <0 175 4>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
 			cache-unified;
 			cache-size = <(256 * 1024)>;
 			cache-sets = <256>;
@@ -69,7 +71,7 @@
 			reg = <0x54006000 0x100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 39 4>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_spi0>;
 			clocks = <&peri_clk 11>;
@@ -80,7 +82,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006800 0x40>;
-			interrupts = <0 33 4>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart0>;
 			clocks = <&peri_clk 0>;
@@ -91,7 +93,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006900 0x40>;
-			interrupts = <0 35 4>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart1>;
 			clocks = <&peri_clk 1>;
@@ -102,7 +104,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006a00 0x40>;
-			interrupts = <0 37 4>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart2>;
 			clocks = <&peri_clk 2>;
@@ -113,7 +115,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006b00 0x40>;
-			interrupts = <0 29 4>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart3>;
 			clocks = <&peri_clk 3>;
@@ -144,7 +146,7 @@
 			reg = <0x58400000 0x40>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 41 1>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_EDGE_RISING>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c0>;
 			clocks = <&peri_clk 4>;
@@ -158,7 +160,7 @@
 			reg = <0x58480000 0x40>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 42 1>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_EDGE_RISING>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c1>;
 			clocks = <&peri_clk 5>;
@@ -172,7 +174,7 @@
 			reg = <0x58500000 0x40>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 43 1>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_EDGE_RISING>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c2>;
 			clocks = <&peri_clk 6>;
@@ -186,7 +188,7 @@
 			reg = <0x58580000 0x40>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 44 1>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c3>;
 			clocks = <&peri_clk 7>;
@@ -244,8 +246,13 @@
 		dmac: dma-controller@5a000000 {
 			compatible = "socionext,uniphier-mio-dmac";
 			reg = <0x5a000000 0x1000>;
-			interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>,
-				     <0 71 4>, <0 72 4>, <0 73 4>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&mio_clk 7>;
 			resets = <&mio_rst 7>;
 			#dma-cells = <1>;
@@ -255,7 +262,7 @@
 			compatible = "socionext,uniphier-sd-v2.91";
 			status = "disabled";
 			reg = <0x5a400000 0x200>;
-			interrupts = <0 76 4>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default", "uhs";
 			pinctrl-0 = <&pinctrl_sd>;
 			pinctrl-1 = <&pinctrl_sd_uhs>;
@@ -275,7 +282,7 @@
 			compatible = "socionext,uniphier-sd-v2.91";
 			status = "disabled";
 			reg = <0x5a500000 0x200>;
-			interrupts = <0 78 4>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_emmc>;
 			clocks = <&mio_clk 1>;
@@ -293,7 +300,7 @@
 			compatible = "socionext,uniphier-ehci", "generic-ehci";
 			status = "disabled";
 			reg = <0x5a800100 0x100>;
-			interrupts = <0 80 4>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb0>;
 			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>,
@@ -307,7 +314,7 @@
 			compatible = "socionext,uniphier-ehci", "generic-ehci";
 			status = "disabled";
 			reg = <0x5a810100 0x100>;
-			interrupts = <0 81 4>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb1>;
 			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>,
@@ -321,7 +328,7 @@
 			compatible = "socionext,uniphier-ehci", "generic-ehci";
 			status = "disabled";
 			reg = <0x5a820100 0x100>;
-			interrupts = <0 82 4>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb2>;
 			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 10>,
@@ -362,14 +369,16 @@
 		timer@60000200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x60000200 0x20>;
-			interrupts = <1 11 0x104>;
+			interrupts = <GIC_PPI 11
+				(GIC_CPU_MASK_RAW(1) | IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&arm_timer_clk>;
 		};
 
 		timer@60000600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x60000600 0x20>;
-			interrupts = <1 13 0x104>;
+			interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_RAW(1) | IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&arm_timer_clk>;
 		};
 
@@ -411,7 +420,7 @@
 			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 65 4>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand>;
 			clock-names = "nand", "nand_x", "ecc";
diff --git a/arch/arm/boot/dts/uniphier-support-card.dtsi b/arch/arm/boot/dts/uniphier-support-card.dtsi
index 444802fee9fb..97e7d5db8eb8 100644
--- a/arch/arm/boot/dts/uniphier-support-card.dtsi
+++ b/arch/arm/boot/dts/uniphier-support-card.dtsi
@@ -8,13 +8,13 @@
 &system_bus {
 	status = "okay";
 	ranges = <1 0x00000000 0x42000000 0x02000000>;
-	interrupt-parent = <&gpio>;
 
 	ethsc: ethernet@1,1f00000 {
 		compatible = "smsc,lan9118", "smsc,lan9115";
 		reg = <1 0x01f00000 0x1000>;
 		phy-mode = "mii";
 		reg-io-width = <4>;
+		interrupt-parent = <&gpio>;
 	};
 
 	serialsc: serial@1,1fb0000 {
@@ -22,5 +22,6 @@
 		reg = <1 0x01fb0000 0x20>;
 		clock-frequency = <12288000>;
 		reg-shift = <1>;
+		interrupt-parent = <&gpio>;
 	};
 };
diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts
index 8a0cfbfd0c45..b6cb9cdf8197 100644
--- a/arch/arm/boot/dts/usb_a9263.dts
+++ b/arch/arm/boot/dts/usb_a9263.dts
@@ -60,7 +60,7 @@
 			spi0: spi@fffa4000 {
 				cs-gpios = <&pioB 15 GPIO_ACTIVE_HIGH>;
 				status = "okay";
-				mtd_dataflash@0 {
+				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					reg = <0>;
 					spi-max-frequency = <15000000>;
diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts
index 79f7cc241282..a520615f4d8d 100644
--- a/arch/arm/boot/dts/versatile-ab.dts
+++ b/arch/arm/boot/dts/versatile-ab.dts
@@ -391,7 +391,7 @@
 			reg = <0x101f4000 0x1000>;
 			interrupts = <11>;
 			clocks = <&xtal24mhz>, <&pclk>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 		};
 
 		fpga {
diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
index c12a1b8bc086..14c411f146f5 100644
--- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
@@ -103,7 +103,7 @@
 	status = "okay";
 
 	/* M41T0M6 real time clock on carrier board */
-	rtc: m41t0m6@68 {
+	rtc: rtc@68 {
 		compatible = "st,m41t0";
 		reg = <0x68>;
 	};
diff --git a/arch/arm/boot/dts/vf610-bk4.dts b/arch/arm/boot/dts/vf610-bk4.dts
index 830c85476b3d..551a4c3ff4fa 100644
--- a/arch/arm/boot/dts/vf610-bk4.dts
+++ b/arch/arm/boot/dts/vf610-bk4.dts
@@ -61,7 +61,7 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
-	spi-gpio {
+	spi {
 		compatible = "spi-gpio";
 		pinctrl-0 = <&pinctrl_gpio_spi>;
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/vf610-pinfunc.h b/arch/arm/boot/dts/vf610-pinfunc.h
index f1e5a7cf58a9..b7b7322a2d1b 100644
--- a/arch/arm/boot/dts/vf610-pinfunc.h
+++ b/arch/arm/boot/dts/vf610-pinfunc.h
@@ -420,7 +420,7 @@
 #define VF610_PAD_PTD29__FTM3_CH2		0x104 0x000 ALT4 0x0
 #define VF610_PAD_PTD29__DSPI2_SIN		0x104 0x000 ALT5 0x0
 #define VF610_PAD_PTD29__DEBUG_OUT11		0x104 0x000 ALT7 0x0
-#define VF610_PAD_PTD28__GPIO_66	 	0x108 0x000 ALT0 0x0
+#define VF610_PAD_PTD28__GPIO_66		0x108 0x000 ALT0 0x0
 #define VF610_PAD_PTD28__FB_AD28		0x108 0x000 ALT1 0x0
 #define VF610_PAD_PTD28__NF_IO12		0x108 0x000 ALT2 0x0
 #define VF610_PAD_PTD28__I2C2_SCL		0x108 0x34C ALT3 0x1
@@ -802,5 +802,55 @@
 #define VF610_PAD_PTE28__EWM_OUT		0x214 0x000 ALT7 0x0
 #define VF610_PAD_PTA7__GPIO_134		0x218 0x000 ALT0 0x0
 #define VF610_PAD_PTA7__VIU_PIX_CLK		0x218 0x3AC ALT1 0x1
+#define VF610_PAD_DDR_RESETB			0x21c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A15__DDR_A_15		0x220 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A14__DDR_A_14		0x224 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A13__DDR_A_13		0x228 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A12__DDR_A_12		0x22c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A11__DDR_A_11		0x230 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A10__DDR_A_10		0x234 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A9__DDR_A_9		0x238 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A8__DDR_A_8		0x23c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A7__DDR_A_7		0x240 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A6__DDR_A_6		0x244 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A5__DDR_A_5		0x248 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A4__DDR_A_4		0x24c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A3__DDR_A_3		0x250 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A2__DDR_A_2		0x254 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A1__DDR_A_1		0x258 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A0__DDR_A_0		0x25c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_BA2__DDR_BA_2		0x260 0x000 ALT0 0x0
+#define VF610_PAD_DDR_BA1__DDR_BA_1		0x264 0x000 ALT0 0x0
+#define VF610_PAD_DDR_BA0__DDR_BA_0		0x268 0x000 ALT0 0x0
+#define VF610_PAD_DDR_CAS__DDR_CAS_B		0x26c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_CKE__DDR_CKE_0		0x270 0x000 ALT0 0x0
+#define VF610_PAD_DDR_CLK__DDR_CLK_0		0x274 0x000 ALT0 0x0
+#define VF610_PAD_DDR_CS__DDR_CS_B_0		0x278 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D15__DDR_D_15		0x27c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D14__DDR_D_14		0x280 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D13__DDR_D_13		0x284 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D12__DDR_D_12		0x288 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D11__DDR_D_11		0x28c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D10__DDR_D_10		0x290 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D9__DDR_D_9		0x294 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D8__DDR_D_8		0x298 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D7__DDR_D_7		0x29c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D6__DDR_D_6		0x2a0 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D5__DDR_D_5		0x2a4 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D4__DDR_D_4		0x2a8 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D3__DDR_D_3		0x2ac 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D2__DDR_D_2		0x2b0 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D1__DDR_D_1		0x2b4 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D0__DDR_D_0		0x2b8 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DQM1__DDR_DQM_1		0x2bc 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DQM0__DDR_DQM_0		0x2c0 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DQS1__DDR_DQS_1		0x2c4 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DQS0__DDR_DQS_0		0x2c8 0x000 ALT0 0x0
+#define VF610_PAD_DDR_RAS__DDR_RAS_B		0x2cc 0x000 ALT0 0x0
+#define VF610_PAD_DDR_WE__DDR_WE_B		0x2d0 0x000 ALT0 0x0
+#define VF610_PAD_DDR_ODT1__DDR_ODT_0		0x2d4 0x000 ALT0 0x0
+#define VF610_PAD_DDR_ODT0__DDR_ODT_1		0x2d8 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DDRBYTE1__DDR_DDRBYTE1	0x2dc 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DDRBYTE2__DDR_DDRBYTE2	0x2e0 0x000 ALT0 0x0
 
 #endif
diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts
index dbb5ffcdcec4..6c246d5aa032 100644
--- a/arch/arm/boot/dts/vf610-twr.dts
+++ b/arch/arm/boot/dts/vf610-twr.dts
@@ -169,7 +169,7 @@
 	       VDDA-supply = <&reg_3p3v>;
 	       VDDIO-supply = <&reg_3p3v>;
 	       clocks = <&clks VF610_CLK_SAI2>;
-       };
+	};
 };
 
 &iomuxc {
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
index 1f9686c33a84..42ed4a04a12e 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
@@ -288,7 +288,7 @@
 		};
 	};
 
-	spi0 {
+	spi-0 {
 		compatible = "spi-gpio";
 		pinctrl-0 = <&pinctrl_gpio_spi0>;
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi
index 956182d08e74..2fba923821d0 100644
--- a/arch/arm/boot/dts/vf610.dtsi
+++ b/arch/arm/boot/dts/vf610.dtsi
@@ -2,7 +2,6 @@
 //
 // Copyright 2013 Freescale Semiconductor, Inc.
 
-
 #include "vf500.dtsi"
 
 &a5_cpu {
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index 47c2a4b14c06..c193264a86ff 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -343,8 +343,6 @@
 			             <0 40 4>, <0 41 4>,
 			             <0 42 4>, <0 43 4>;
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <4>;
 			clocks = <&clkc 27>;
 			clock-names = "apb_pclk";
 		};
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index cf70aff26c66..d23201ba8cd7 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -30,14 +30,14 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 		autorepeat;
-		sw14 {
+		switch-14 {
 			label = "sw14";
 			gpios = <&gpio0 12 0>;
 			linux,code = <108>; /* down */
 			wakeup-source;
 			autorepeat;
 		};
-		sw13 {
+		switch-13 {
 			label = "sw13";
 			gpios = <&gpio0 14 0>;
 			linux,code = <103>; /* up */
diff --git a/arch/arm/boot/dts/zynq-zturn-common.dtsi b/arch/arm/boot/dts/zynq-zturn-common.dtsi
index bf5d1c4568b0..dfb1fbafe3aa 100644
--- a/arch/arm/boot/dts/zynq-zturn-common.dtsi
+++ b/arch/arm/boot/dts/zynq-zturn-common.dtsi
@@ -49,7 +49,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 		autorepeat;
-		K1 {
+		key {
 			label = "K1";
 			gpios = <&gpio0 0x32 0x1>;
 			linux,code = <0x66>;
diff --git a/arch/arm/boot/install.sh b/arch/arm/boot/install.sh
index 2a45092a40e3..9ec11fac7d8d 100644..100755
--- a/arch/arm/boot/install.sh
+++ b/arch/arm/boot/install.sh
@@ -1,7 +1,5 @@
 #!/bin/sh
 #
-# arch/arm/boot/install.sh
-#
 # This file is subject to the terms and conditions of the GNU General Public
 # License.  See the file "COPYING" in the main directory of this archive
 # for more details.
@@ -18,25 +16,6 @@
 #   $2 - kernel image file
 #   $3 - kernel map file
 #   $4 - default install path (blank if root directory)
-#
-
-verify () {
-	if [ ! -f "$1" ]; then
-		echo ""                                                   1>&2
-		echo " *** Missing file: $1"                              1>&2
-		echo ' *** You need to run "make" before "make install".' 1>&2
-		echo ""                                                   1>&2
-		exit 1
-	fi
-}
-
-# Make sure the files actually exist
-verify "$2"
-verify "$3"
-
-# User may have a custom install script
-if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
 
 if [ "$(basename $2)" = "zImage" ]; then
 # Compressed install
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index c8e198631d41..d2fdb1796f48 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -1,11 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 config SA1111
 	bool
-	select DMABOUNCE if !ARCH_PXA
-
-config DMABOUNCE
-	bool
-	select ZONE_DMA
+	select ZONE_DMA if ARCH_SA1100
 
 config KRAIT_L2_ACCESSORS
 	bool
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index 8cd574be94cf..7bae8cbaafe7 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -6,7 +6,6 @@
 obj-y				+= firmware.o
 
 obj-$(CONFIG_SA1111)		+= sa1111.o
-obj-$(CONFIG_DMABOUNCE)		+= dmabounce.o
 obj-$(CONFIG_KRAIT_L2_ACCESSORS) += krait-l2-accessors.o
 obj-$(CONFIG_SHARP_LOCOMO)	+= locomo.o
 obj-$(CONFIG_SHARP_PARAM)	+= sharpsl_param.o
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
deleted file mode 100644
index 7996c04393d5..000000000000
--- a/arch/arm/common/dmabounce.c
+++ /dev/null
@@ -1,582 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  arch/arm/common/dmabounce.c
- *
- *  Special dma_{map/unmap/dma_sync}_* routines for systems that have
- *  limited DMA windows. These functions utilize bounce buffers to
- *  copy data to/from buffers located outside the DMA region. This
- *  only works for systems in which DMA memory is at the bottom of
- *  RAM, the remainder of memory is at the top and the DMA memory
- *  can be marked as ZONE_DMA. Anything beyond that such as discontiguous
- *  DMA windows will require custom implementations that reserve memory
- *  areas at early bootup.
- *
- *  Original version by Brad Parker (brad@heeltoe.com)
- *  Re-written by Christopher Hoover <ch@murgatroid.com>
- *  Made generic by Deepak Saxena <dsaxena@plexity.net>
- *
- *  Copyright (C) 2002 Hewlett Packard Company.
- *  Copyright (C) 2004 MontaVista Software, Inc.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/page-flags.h>
-#include <linux/device.h>
-#include <linux/dma-direct.h>
-#include <linux/dma-map-ops.h>
-#include <linux/dmapool.h>
-#include <linux/list.h>
-#include <linux/scatterlist.h>
-
-#include <asm/cacheflush.h>
-#include <asm/dma-iommu.h>
-
-#undef STATS
-
-#ifdef STATS
-#define DO_STATS(X) do { X ; } while (0)
-#else
-#define DO_STATS(X) do { } while (0)
-#endif
-
-/* ************************************************** */
-
-struct safe_buffer {
-	struct list_head node;
-
-	/* original request */
-	void		*ptr;
-	size_t		size;
-	int		direction;
-
-	/* safe buffer info */
-	struct dmabounce_pool *pool;
-	void		*safe;
-	dma_addr_t	safe_dma_addr;
-};
-
-struct dmabounce_pool {
-	unsigned long	size;
-	struct dma_pool	*pool;
-#ifdef STATS
-	unsigned long	allocs;
-#endif
-};
-
-struct dmabounce_device_info {
-	struct device *dev;
-	struct list_head safe_buffers;
-#ifdef STATS
-	unsigned long total_allocs;
-	unsigned long map_op_count;
-	unsigned long bounce_count;
-	int attr_res;
-#endif
-	struct dmabounce_pool	small;
-	struct dmabounce_pool	large;
-
-	rwlock_t lock;
-
-	int (*needs_bounce)(struct device *, dma_addr_t, size_t);
-};
-
-#ifdef STATS
-static ssize_t dmabounce_show(struct device *dev, struct device_attribute *attr,
-			      char *buf)
-{
-	struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
-	return sprintf(buf, "%lu %lu %lu %lu %lu %lu\n",
-		device_info->small.allocs,
-		device_info->large.allocs,
-		device_info->total_allocs - device_info->small.allocs -
-			device_info->large.allocs,
-		device_info->total_allocs,
-		device_info->map_op_count,
-		device_info->bounce_count);
-}
-
-static DEVICE_ATTR(dmabounce_stats, 0400, dmabounce_show, NULL);
-#endif
-
-
-/* allocate a 'safe' buffer and keep track of it */
-static inline struct safe_buffer *
-alloc_safe_buffer(struct dmabounce_device_info *device_info, void *ptr,
-		  size_t size, enum dma_data_direction dir)
-{
-	struct safe_buffer *buf;
-	struct dmabounce_pool *pool;
-	struct device *dev = device_info->dev;
-	unsigned long flags;
-
-	dev_dbg(dev, "%s(ptr=%p, size=%d, dir=%d)\n",
-		__func__, ptr, size, dir);
-
-	if (size <= device_info->small.size) {
-		pool = &device_info->small;
-	} else if (size <= device_info->large.size) {
-		pool = &device_info->large;
-	} else {
-		pool = NULL;
-	}
-
-	buf = kmalloc(sizeof(struct safe_buffer), GFP_ATOMIC);
-	if (buf == NULL) {
-		dev_warn(dev, "%s: kmalloc failed\n", __func__);
-		return NULL;
-	}
-
-	buf->ptr = ptr;
-	buf->size = size;
-	buf->direction = dir;
-	buf->pool = pool;
-
-	if (pool) {
-		buf->safe = dma_pool_alloc(pool->pool, GFP_ATOMIC,
-					   &buf->safe_dma_addr);
-	} else {
-		buf->safe = dma_alloc_coherent(dev, size, &buf->safe_dma_addr,
-					       GFP_ATOMIC);
-	}
-
-	if (buf->safe == NULL) {
-		dev_warn(dev,
-			 "%s: could not alloc dma memory (size=%d)\n",
-			 __func__, size);
-		kfree(buf);
-		return NULL;
-	}
-
-#ifdef STATS
-	if (pool)
-		pool->allocs++;
-	device_info->total_allocs++;
-#endif
-
-	write_lock_irqsave(&device_info->lock, flags);
-	list_add(&buf->node, &device_info->safe_buffers);
-	write_unlock_irqrestore(&device_info->lock, flags);
-
-	return buf;
-}
-
-/* determine if a buffer is from our "safe" pool */
-static inline struct safe_buffer *
-find_safe_buffer(struct dmabounce_device_info *device_info, dma_addr_t safe_dma_addr)
-{
-	struct safe_buffer *b, *rb = NULL;
-	unsigned long flags;
-
-	read_lock_irqsave(&device_info->lock, flags);
-
-	list_for_each_entry(b, &device_info->safe_buffers, node)
-		if (b->safe_dma_addr <= safe_dma_addr &&
-		    b->safe_dma_addr + b->size > safe_dma_addr) {
-			rb = b;
-			break;
-		}
-
-	read_unlock_irqrestore(&device_info->lock, flags);
-	return rb;
-}
-
-static inline void
-free_safe_buffer(struct dmabounce_device_info *device_info, struct safe_buffer *buf)
-{
-	unsigned long flags;
-
-	dev_dbg(device_info->dev, "%s(buf=%p)\n", __func__, buf);
-
-	write_lock_irqsave(&device_info->lock, flags);
-
-	list_del(&buf->node);
-
-	write_unlock_irqrestore(&device_info->lock, flags);
-
-	if (buf->pool)
-		dma_pool_free(buf->pool->pool, buf->safe, buf->safe_dma_addr);
-	else
-		dma_free_coherent(device_info->dev, buf->size, buf->safe,
-				    buf->safe_dma_addr);
-
-	kfree(buf);
-}
-
-/* ************************************************** */
-
-static struct safe_buffer *find_safe_buffer_dev(struct device *dev,
-		dma_addr_t dma_addr, const char *where)
-{
-	if (!dev || !dev->archdata.dmabounce)
-		return NULL;
-	if (dma_mapping_error(dev, dma_addr)) {
-		dev_err(dev, "Trying to %s invalid mapping\n", where);
-		return NULL;
-	}
-	return find_safe_buffer(dev->archdata.dmabounce, dma_addr);
-}
-
-static int needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
-{
-	if (!dev || !dev->archdata.dmabounce)
-		return 0;
-
-	if (dev->dma_mask) {
-		unsigned long limit, mask = *dev->dma_mask;
-
-		limit = (mask + 1) & ~mask;
-		if (limit && size > limit) {
-			dev_err(dev, "DMA mapping too big (requested %#x "
-				"mask %#Lx)\n", size, *dev->dma_mask);
-			return -E2BIG;
-		}
-
-		/* Figure out if we need to bounce from the DMA mask. */
-		if ((dma_addr | (dma_addr + size - 1)) & ~mask)
-			return 1;
-	}
-
-	return !!dev->archdata.dmabounce->needs_bounce(dev, dma_addr, size);
-}
-
-static inline dma_addr_t map_single(struct device *dev, void *ptr, size_t size,
-				    enum dma_data_direction dir,
-				    unsigned long attrs)
-{
-	struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
-	struct safe_buffer *buf;
-
-	if (device_info)
-		DO_STATS ( device_info->map_op_count++ );
-
-	buf = alloc_safe_buffer(device_info, ptr, size, dir);
-	if (buf == NULL) {
-		dev_err(dev, "%s: unable to map unsafe buffer %p!\n",
-		       __func__, ptr);
-		return DMA_MAPPING_ERROR;
-	}
-
-	dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
-		__func__, buf->ptr, virt_to_dma(dev, buf->ptr),
-		buf->safe, buf->safe_dma_addr);
-
-	if ((dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL) &&
-	    !(attrs & DMA_ATTR_SKIP_CPU_SYNC)) {
-		dev_dbg(dev, "%s: copy unsafe %p to safe %p, size %d\n",
-			__func__, ptr, buf->safe, size);
-		memcpy(buf->safe, ptr, size);
-	}
-
-	return buf->safe_dma_addr;
-}
-
-static inline void unmap_single(struct device *dev, struct safe_buffer *buf,
-				size_t size, enum dma_data_direction dir,
-				unsigned long attrs)
-{
-	BUG_ON(buf->size != size);
-	BUG_ON(buf->direction != dir);
-
-	dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
-		__func__, buf->ptr, virt_to_dma(dev, buf->ptr),
-		buf->safe, buf->safe_dma_addr);
-
-	DO_STATS(dev->archdata.dmabounce->bounce_count++);
-
-	if ((dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) &&
-	    !(attrs & DMA_ATTR_SKIP_CPU_SYNC)) {
-		void *ptr = buf->ptr;
-
-		dev_dbg(dev, "%s: copy back safe %p to unsafe %p size %d\n",
-			__func__, buf->safe, ptr, size);
-		memcpy(ptr, buf->safe, size);
-
-		/*
-		 * Since we may have written to a page cache page,
-		 * we need to ensure that the data will be coherent
-		 * with user mappings.
-		 */
-		__cpuc_flush_dcache_area(ptr, size);
-	}
-	free_safe_buffer(dev->archdata.dmabounce, buf);
-}
-
-/* ************************************************** */
-
-/*
- * see if a buffer address is in an 'unsafe' range.  if it is
- * allocate a 'safe' buffer and copy the unsafe buffer into it.
- * substitute the safe buffer for the unsafe one.
- * (basically move the buffer from an unsafe area to a safe one)
- */
-static dma_addr_t dmabounce_map_page(struct device *dev, struct page *page,
-		unsigned long offset, size_t size, enum dma_data_direction dir,
-		unsigned long attrs)
-{
-	dma_addr_t dma_addr;
-	int ret;
-
-	dev_dbg(dev, "%s(page=%p,off=%#lx,size=%zx,dir=%x)\n",
-		__func__, page, offset, size, dir);
-
-	dma_addr = pfn_to_dma(dev, page_to_pfn(page)) + offset;
-
-	ret = needs_bounce(dev, dma_addr, size);
-	if (ret < 0)
-		return DMA_MAPPING_ERROR;
-
-	if (ret == 0) {
-		arm_dma_ops.sync_single_for_device(dev, dma_addr, size, dir);
-		return dma_addr;
-	}
-
-	if (PageHighMem(page)) {
-		dev_err(dev, "DMA buffer bouncing of HIGHMEM pages is not supported\n");
-		return DMA_MAPPING_ERROR;
-	}
-
-	return map_single(dev, page_address(page) + offset, size, dir, attrs);
-}
-
-/*
- * see if a mapped address was really a "safe" buffer and if so, copy
- * the data from the safe buffer back to the unsafe buffer and free up
- * the safe buffer.  (basically return things back to the way they
- * should be)
- */
-static void dmabounce_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size,
-		enum dma_data_direction dir, unsigned long attrs)
-{
-	struct safe_buffer *buf;
-
-	dev_dbg(dev, "%s(dma=%#x,size=%d,dir=%x)\n",
-		__func__, dma_addr, size, dir);
-
-	buf = find_safe_buffer_dev(dev, dma_addr, __func__);
-	if (!buf) {
-		arm_dma_ops.sync_single_for_cpu(dev, dma_addr, size, dir);
-		return;
-	}
-
-	unmap_single(dev, buf, size, dir, attrs);
-}
-
-static int __dmabounce_sync_for_cpu(struct device *dev, dma_addr_t addr,
-		size_t sz, enum dma_data_direction dir)
-{
-	struct safe_buffer *buf;
-	unsigned long off;
-
-	dev_dbg(dev, "%s(dma=%#x,sz=%zx,dir=%x)\n",
-		__func__, addr, sz, dir);
-
-	buf = find_safe_buffer_dev(dev, addr, __func__);
-	if (!buf)
-		return 1;
-
-	off = addr - buf->safe_dma_addr;
-
-	BUG_ON(buf->direction != dir);
-
-	dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x off=%#lx) mapped to %p (dma=%#x)\n",
-		__func__, buf->ptr, virt_to_dma(dev, buf->ptr), off,
-		buf->safe, buf->safe_dma_addr);
-
-	DO_STATS(dev->archdata.dmabounce->bounce_count++);
-
-	if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) {
-		dev_dbg(dev, "%s: copy back safe %p to unsafe %p size %d\n",
-			__func__, buf->safe + off, buf->ptr + off, sz);
-		memcpy(buf->ptr + off, buf->safe + off, sz);
-	}
-	return 0;
-}
-
-static void dmabounce_sync_for_cpu(struct device *dev,
-		dma_addr_t handle, size_t size, enum dma_data_direction dir)
-{
-	if (!__dmabounce_sync_for_cpu(dev, handle, size, dir))
-		return;
-
-	arm_dma_ops.sync_single_for_cpu(dev, handle, size, dir);
-}
-
-static int __dmabounce_sync_for_device(struct device *dev, dma_addr_t addr,
-		size_t sz, enum dma_data_direction dir)
-{
-	struct safe_buffer *buf;
-	unsigned long off;
-
-	dev_dbg(dev, "%s(dma=%#x,sz=%zx,dir=%x)\n",
-		__func__, addr, sz, dir);
-
-	buf = find_safe_buffer_dev(dev, addr, __func__);
-	if (!buf)
-		return 1;
-
-	off = addr - buf->safe_dma_addr;
-
-	BUG_ON(buf->direction != dir);
-
-	dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x off=%#lx) mapped to %p (dma=%#x)\n",
-		__func__, buf->ptr, virt_to_dma(dev, buf->ptr), off,
-		buf->safe, buf->safe_dma_addr);
-
-	DO_STATS(dev->archdata.dmabounce->bounce_count++);
-
-	if (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL) {
-		dev_dbg(dev, "%s: copy out unsafe %p to safe %p, size %d\n",
-			__func__,buf->ptr + off, buf->safe + off, sz);
-		memcpy(buf->safe + off, buf->ptr + off, sz);
-	}
-	return 0;
-}
-
-static void dmabounce_sync_for_device(struct device *dev,
-		dma_addr_t handle, size_t size, enum dma_data_direction dir)
-{
-	if (!__dmabounce_sync_for_device(dev, handle, size, dir))
-		return;
-
-	arm_dma_ops.sync_single_for_device(dev, handle, size, dir);
-}
-
-static int dmabounce_dma_supported(struct device *dev, u64 dma_mask)
-{
-	if (dev->archdata.dmabounce)
-		return 0;
-
-	return arm_dma_ops.dma_supported(dev, dma_mask);
-}
-
-static const struct dma_map_ops dmabounce_ops = {
-	.alloc			= arm_dma_alloc,
-	.free			= arm_dma_free,
-	.mmap			= arm_dma_mmap,
-	.get_sgtable		= arm_dma_get_sgtable,
-	.map_page		= dmabounce_map_page,
-	.unmap_page		= dmabounce_unmap_page,
-	.sync_single_for_cpu	= dmabounce_sync_for_cpu,
-	.sync_single_for_device	= dmabounce_sync_for_device,
-	.map_sg			= arm_dma_map_sg,
-	.unmap_sg		= arm_dma_unmap_sg,
-	.sync_sg_for_cpu	= arm_dma_sync_sg_for_cpu,
-	.sync_sg_for_device	= arm_dma_sync_sg_for_device,
-	.dma_supported		= dmabounce_dma_supported,
-};
-
-static int dmabounce_init_pool(struct dmabounce_pool *pool, struct device *dev,
-		const char *name, unsigned long size)
-{
-	pool->size = size;
-	DO_STATS(pool->allocs = 0);
-	pool->pool = dma_pool_create(name, dev, size,
-				     0 /* byte alignment */,
-				     0 /* no page-crossing issues */);
-
-	return pool->pool ? 0 : -ENOMEM;
-}
-
-int dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size,
-		unsigned long large_buffer_size,
-		int (*needs_bounce_fn)(struct device *, dma_addr_t, size_t))
-{
-	struct dmabounce_device_info *device_info;
-	int ret;
-
-	device_info = kmalloc(sizeof(struct dmabounce_device_info), GFP_ATOMIC);
-	if (!device_info) {
-		dev_err(dev,
-			"Could not allocated dmabounce_device_info\n");
-		return -ENOMEM;
-	}
-
-	ret = dmabounce_init_pool(&device_info->small, dev,
-				  "small_dmabounce_pool", small_buffer_size);
-	if (ret) {
-		dev_err(dev,
-			"dmabounce: could not allocate DMA pool for %ld byte objects\n",
-			small_buffer_size);
-		goto err_free;
-	}
-
-	if (large_buffer_size) {
-		ret = dmabounce_init_pool(&device_info->large, dev,
-					  "large_dmabounce_pool",
-					  large_buffer_size);
-		if (ret) {
-			dev_err(dev,
-				"dmabounce: could not allocate DMA pool for %ld byte objects\n",
-				large_buffer_size);
-			goto err_destroy;
-		}
-	}
-
-	device_info->dev = dev;
-	INIT_LIST_HEAD(&device_info->safe_buffers);
-	rwlock_init(&device_info->lock);
-	device_info->needs_bounce = needs_bounce_fn;
-
-#ifdef STATS
-	device_info->total_allocs = 0;
-	device_info->map_op_count = 0;
-	device_info->bounce_count = 0;
-	device_info->attr_res = device_create_file(dev, &dev_attr_dmabounce_stats);
-#endif
-
-	dev->archdata.dmabounce = device_info;
-	set_dma_ops(dev, &dmabounce_ops);
-
-	dev_info(dev, "dmabounce: registered device\n");
-
-	return 0;
-
- err_destroy:
-	dma_pool_destroy(device_info->small.pool);
- err_free:
-	kfree(device_info);
-	return ret;
-}
-EXPORT_SYMBOL(dmabounce_register_dev);
-
-void dmabounce_unregister_dev(struct device *dev)
-{
-	struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
-
-	dev->archdata.dmabounce = NULL;
-	set_dma_ops(dev, NULL);
-
-	if (!device_info) {
-		dev_warn(dev,
-			 "Never registered with dmabounce but attempting"
-			 "to unregister!\n");
-		return;
-	}
-
-	if (!list_empty(&device_info->safe_buffers)) {
-		dev_err(dev,
-			"Removing from dmabounce with pending buffers!\n");
-		BUG();
-	}
-
-	if (device_info->small.pool)
-		dma_pool_destroy(device_info->small.pool);
-	if (device_info->large.pool)
-		dma_pool_destroy(device_info->large.pool);
-
-#ifdef STATS
-	if (device_info->attr_res == 0)
-		device_remove_file(dev, &dev_attr_dmabounce_stats);
-#endif
-
-	kfree(device_info);
-
-	dev_info(dev, "dmabounce: device unregistered\n");
-}
-EXPORT_SYMBOL(dmabounce_unregister_dev);
-
-MODULE_AUTHOR("Christopher Hoover <ch@hpl.hp.com>, Deepak Saxena <dsaxena@plexity.net>");
-MODULE_DESCRIPTION("Special dma_{map/unmap/dma_sync}_* routines for systems with limited DMA windows");
-MODULE_LICENSE("GPL");
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index 24d21ba63030..da30a4d4f35c 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -23,7 +23,6 @@
 #include <linux/spinlock.h>
 #include <linux/io.h>
 
-#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index 5367f03beb46..f5e6990b8856 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -26,13 +26,16 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <mach/hardware.h>
 #include <asm/mach/irq.h>
 #include <asm/mach-types.h>
 #include <linux/sizes.h>
 
 #include <asm/hardware/sa1111.h>
 
+#ifdef CONFIG_ARCH_SA1100
+#include <mach/hardware.h>
+#endif
+
 /* SA1111 IRQs */
 #define IRQ_GPAIN0		(0)
 #define IRQ_GPAIN1		(1)
@@ -1386,70 +1389,9 @@ void sa1111_driver_unregister(struct sa1111_driver *driver)
 }
 EXPORT_SYMBOL(sa1111_driver_unregister);
 
-#ifdef CONFIG_DMABOUNCE
-/*
- * According to the "Intel StrongARM SA-1111 Microprocessor Companion
- * Chip Specification Update" (June 2000), erratum #7, there is a
- * significant bug in the SA1111 SDRAM shared memory controller.  If
- * an access to a region of memory above 1MB relative to the bank base,
- * it is important that address bit 10 _NOT_ be asserted. Depending
- * on the configuration of the RAM, bit 10 may correspond to one
- * of several different (processor-relative) address bits.
- *
- * This routine only identifies whether or not a given DMA address
- * is susceptible to the bug.
- *
- * This should only get called for sa1111_device types due to the
- * way we configure our device dma_masks.
- */
-static int sa1111_needs_bounce(struct device *dev, dma_addr_t addr, size_t size)
-{
-	/*
-	 * Section 4.6 of the "Intel StrongARM SA-1111 Development Module
-	 * User's Guide" mentions that jumpers R51 and R52 control the
-	 * target of SA-1111 DMA (either SDRAM bank 0 on Assabet, or
-	 * SDRAM bank 1 on Neponset). The default configuration selects
-	 * Assabet, so any address in bank 1 is necessarily invalid.
-	 */
-	return (machine_is_assabet() || machine_is_pfs168()) &&
-		(addr >= 0xc8000000 || (addr + size) >= 0xc8000000);
-}
-
-static int sa1111_notifier_call(struct notifier_block *n, unsigned long action,
-	void *data)
-{
-	struct sa1111_dev *dev = to_sa1111_device(data);
-
-	switch (action) {
-	case BUS_NOTIFY_ADD_DEVICE:
-		if (dev->dev.dma_mask && dev->dma_mask < 0xffffffffUL) {
-			int ret = dmabounce_register_dev(&dev->dev, 1024, 4096,
-					sa1111_needs_bounce);
-			if (ret)
-				dev_err(&dev->dev, "failed to register with dmabounce: %d\n", ret);
-		}
-		break;
-
-	case BUS_NOTIFY_DEL_DEVICE:
-		if (dev->dev.dma_mask && dev->dma_mask < 0xffffffffUL)
-			dmabounce_unregister_dev(&dev->dev);
-		break;
-	}
-	return NOTIFY_OK;
-}
-
-static struct notifier_block sa1111_bus_notifier = {
-	.notifier_call = sa1111_notifier_call,
-};
-#endif
-
 static int __init sa1111_init(void)
 {
 	int ret = bus_register(&sa1111_bus_type);
-#ifdef CONFIG_DMABOUNCE
-	if (ret == 0)
-		bus_register_notifier(&sa1111_bus_type, &sa1111_bus_notifier);
-#endif
 	if (ret == 0)
 		platform_driver_register(&sa1111_device_driver);
 	return ret;
@@ -1458,9 +1400,6 @@ static int __init sa1111_init(void)
 static void __exit sa1111_exit(void)
 {
 	platform_driver_unregister(&sa1111_device_driver);
-#ifdef CONFIG_DMABOUNCE
-	bus_unregister_notifier(&sa1111_bus_type, &sa1111_bus_notifier);
-#endif
 	bus_unregister(&sa1111_bus_type);
 }
 
diff --git a/arch/arm/configs/am200epdkit_defconfig b/arch/arm/configs/am200epdkit_defconfig
index 4e49d6cb2f62..3f633eaf9770 100644
--- a/arch/arm/configs/am200epdkit_defconfig
+++ b/arch/arm/configs/am200epdkit_defconfig
@@ -1,24 +1,22 @@
 CONFIG_LOCALVERSION="gum"
-# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_PREEMPT=y
 CONFIG_EXPERT=y
 # CONFIG_EPOLL is not set
 # CONFIG_SHMEM is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_PXA=y
 CONFIG_ARCH_GUMSTIX=y
-CONFIG_PCCARD=y
-CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200n8 root=1f01 rootfstype=jffs2"
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_SWAP is not set
+CONFIG_SLAB=y
+# CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_NET=y
 CONFIG_PACKET=m
 CONFIG_UNIX=y
@@ -34,6 +32,7 @@ CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=m
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
+CONFIG_PCCARD=y
 CONFIG_MTD=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
@@ -47,14 +46,15 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PXA2XX=y
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_SD=m
+# CONFIG_BLK_DEV_BSG is not set
 CONFIG_ATA=m
 CONFIG_PATA_PCMCIA=m
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_SMC91X=m
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
@@ -83,16 +83,15 @@ CONFIG_VFAT_FS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
 CONFIG_JFFS2_RUBIN=y
-CONFIG_PARTITION_ADVANCED=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_USER=y
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_CBC=m
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_ARC4=m
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_PREEMPT is not set
+CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/aspeed_g4_defconfig b/arch/arm/configs/aspeed_g4_defconfig
index 5d20057bdc43..a5c65d28ca63 100644
--- a/arch/arm/configs/aspeed_g4_defconfig
+++ b/arch/arm/configs/aspeed_g4_defconfig
@@ -1,5 +1,4 @@
 CONFIG_KERNEL_XZ=y
-# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -8,6 +7,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_CGROUPS=y
+CONFIG_NAMESPACES=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZO is not set
@@ -17,9 +17,6 @@ CONFIG_BLK_DEV_INITRD=y
 # CONFIG_AIO is not set
 CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB_FREELIST_RANDOM=y
-CONFIG_SLAB_FREELIST_HARDENED=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_ASPEED=y
 CONFIG_MACH_ASPEED_G4=y
@@ -27,17 +24,17 @@ CONFIG_VMSPLIT_2G=y
 CONFIG_AEABI=y
 CONFIG_UACCESS_WITH_MEMCPY=y
 # CONFIG_ATAGS is not set
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_KEXEC=y
-CONFIG_FIRMWARE_MEMMAP=y
 CONFIG_JUMP_LABEL=y
 CONFIG_STRICT_KERNEL_RWX=y
-# CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEBUG_FS is not set
 # CONFIG_MQ_IOSCHED_DEADLINE is not set
 # CONFIG_MQ_IOSCHED_KYBER is not set
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_SWAP is not set
+CONFIG_SLAB_FREELIST_RANDOM=y
+CONFIG_SLAB_FREELIST_HARDENED=y
+# CONFIG_COMPAT_BRK is not set
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -48,7 +45,11 @@ CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_SYN_COOKIES=y
 # CONFIG_INET_DIAG is not set
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
 # CONFIG_IPV6_SIT is not set
+CONFIG_IPV6_MULTIPLE_TABLES=y
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_ADVANCED is not set
 CONFIG_VLAN_8021Q=y
@@ -57,16 +58,17 @@ CONFIG_NET_NCSI=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FIRMWARE_MEMMAP=y
 CONFIG_MTD=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_PARTITIONED_MASTER=y
 CONFIG_MTD_SPI_NOR=y
 # CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
-CONFIG_SPI_ASPEED_SMC=y
 CONFIG_MTD_UBI=y
 CONFIG_MTD_UBI_FASTMAP=y
 CONFIG_MTD_UBI_BLOCK=y
 CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_NBD=y
 CONFIG_EEPROM_AT24=y
 CONFIG_NETDEVICES=y
 CONFIG_NETCONSOLE=y
@@ -88,9 +90,9 @@ CONFIG_FTGMAC100=y
 # CONFIG_NET_VENDOR_MELLANOX is not set
 # CONFIG_NET_VENDOR_MICREL is not set
 # CONFIG_NET_VENDOR_MICROSEMI is not set
+# CONFIG_NET_VENDOR_NI is not set
 # CONFIG_NET_VENDOR_NATSEMI is not set
 # CONFIG_NET_VENDOR_NETRONOME is not set
-# CONFIG_NET_VENDOR_NI is not set
 # CONFIG_NET_VENDOR_QUALCOMM is not set
 # CONFIG_NET_VENDOR_RENESAS is not set
 # CONFIG_NET_VENDOR_ROCKER is not set
@@ -134,6 +136,7 @@ CONFIG_I2C_MUX_PCA954x=y
 CONFIG_I2C_ASPEED=y
 CONFIG_I2C_FSI=y
 CONFIG_SPI=y
+CONFIG_SPI_ASPEED_SMC=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_ASPEED=y
@@ -145,6 +148,7 @@ CONFIG_SENSORS_ASPEED=y
 CONFIG_SENSORS_IIO_HWMON=y
 CONFIG_SENSORS_LM75=y
 CONFIG_SENSORS_NCT7904=y
+CONFIG_SENSORS_OCC_P8_I2C=y
 CONFIG_PMBUS=y
 CONFIG_SENSORS_ADM1275=y
 CONFIG_SENSORS_IBM_CFFPS=y
@@ -244,9 +248,8 @@ CONFIG_CRYPTO_USER_API_HASH=y
 # CONFIG_XZ_DEC_SPARC is not set
 CONFIG_PRINTK_TIME=y
 CONFIG_DYNAMIC_DEBUG=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_INFO_REDUCED=y
 CONFIG_DEBUG_INFO_DWARF4=y
+CONFIG_DEBUG_INFO_REDUCED=y
 CONFIG_GDB_SCRIPTS=y
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_FS=y
diff --git a/arch/arm/configs/aspeed_g5_defconfig b/arch/arm/configs/aspeed_g5_defconfig
index ae4f3c56ae6b..c7c11cbaa39d 100644
--- a/arch/arm/configs/aspeed_g5_defconfig
+++ b/arch/arm/configs/aspeed_g5_defconfig
@@ -1,5 +1,4 @@
 CONFIG_KERNEL_XZ=y
-# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -8,6 +7,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_CGROUPS=y
+CONFIG_NAMESPACES=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZO is not set
@@ -17,9 +17,6 @@ CONFIG_BLK_DEV_INITRD=y
 # CONFIG_AIO is not set
 CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB_FREELIST_RANDOM=y
-CONFIG_SLAB_FREELIST_HARDENED=y
 CONFIG_ARCH_MULTI_V6=y
 CONFIG_ARCH_ASPEED=y
 CONFIG_MACH_ASPEED_G5=y
@@ -36,13 +33,15 @@ CONFIG_KEXEC=y
 CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_KERNEL_MODE_NEON=y
-CONFIG_FIRMWARE_MEMMAP=y
 CONFIG_JUMP_LABEL=y
-# CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEBUG_FS is not set
 # CONFIG_MQ_IOSCHED_DEADLINE is not set
 # CONFIG_MQ_IOSCHED_KYBER is not set
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_SWAP is not set
+CONFIG_SLAB_FREELIST_RANDOM=y
+CONFIG_SLAB_FREELIST_HARDENED=y
+# CONFIG_COMPAT_BRK is not set
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -66,16 +65,17 @@ CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_ADVANCED is not set
 CONFIG_VLAN_8021Q=y
 CONFIG_NET_NCSI=y
+CONFIG_MCTP=y
 # CONFIG_WIRELESS is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FIRMWARE_MEMMAP=y
 CONFIG_MTD=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_PARTITIONED_MASTER=y
 CONFIG_MTD_SPI_NOR=y
 # CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
-CONFIG_SPI_ASPEED_SMC=y
 CONFIG_MTD_UBI=y
 CONFIG_MTD_UBI_FASTMAP=y
 CONFIG_MTD_UBI_BLOCK=y
@@ -83,6 +83,8 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=y
 CONFIG_EEPROM_AT24=y
 CONFIG_EEPROM_AT25=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y
 CONFIG_NETCONSOLE=y
 # CONFIG_NET_VENDOR_ALACRITECH is not set
@@ -103,9 +105,9 @@ CONFIG_FTGMAC100=y
 # CONFIG_NET_VENDOR_MELLANOX is not set
 # CONFIG_NET_VENDOR_MICREL is not set
 # CONFIG_NET_VENDOR_MICROSEMI is not set
+# CONFIG_NET_VENDOR_NI is not set
 # CONFIG_NET_VENDOR_NATSEMI is not set
 # CONFIG_NET_VENDOR_NETRONOME is not set
-# CONFIG_NET_VENDOR_NI is not set
 # CONFIG_NET_VENDOR_QUALCOMM is not set
 # CONFIG_NET_VENDOR_RENESAS is not set
 # CONFIG_NET_VENDOR_ROCKER is not set
@@ -120,6 +122,8 @@ CONFIG_FTGMAC100=y
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_BROADCOM_PHY=y
 CONFIG_REALTEK_PHY=y
+CONFIG_MCTP_SERIAL=y
+CONFIG_MCTP_TRANSPORT_I2C=y
 # CONFIG_USB_NET_DRIVERS is not set
 # CONFIG_WLAN is not set
 CONFIG_INPUT_EVDEV=y
@@ -147,6 +151,8 @@ CONFIG_IPMI_KCS_BMC_CDEV_IPMI=y
 CONFIG_IPMI_KCS_BMC_SERIO=y
 CONFIG_ASPEED_BT_IPMI_BMC=y
 CONFIG_HW_RANDOM_TIMERIOMEM=y
+CONFIG_TCG_TPM=y
+CONFIG_TCG_TIS_I2C=y
 # CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MUX_GPIO=y
@@ -156,6 +162,7 @@ CONFIG_I2C_ASPEED=y
 CONFIG_I2C_FSI=y
 CONFIG_I2C_SLAVE=y
 CONFIG_SPI=y
+CONFIG_SPI_ASPEED_SMC=y
 CONFIG_SPI_FSI=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
@@ -180,6 +187,7 @@ CONFIG_SENSORS_IR38064=y
 CONFIG_SENSORS_ISL68137=y
 CONFIG_SENSORS_LM25066=y
 CONFIG_SENSORS_MAX31785=y
+CONFIG_SENSORS_MP5023=y
 CONFIG_SENSORS_UCD9000=y
 CONFIG_SENSORS_UCD9200=y
 CONFIG_SENSORS_SBTSI=y
@@ -200,6 +208,9 @@ CONFIG_USB_DYNAMIC_MINORS=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_PL2303=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_ASPEED_VHUB=y
 CONFIG_USB_CONFIGFS=y
@@ -243,9 +254,13 @@ CONFIG_FSI_MASTER_ASPEED=y
 CONFIG_FSI_SCOM=y
 CONFIG_FSI_SBEFIFO=y
 CONFIG_FSI_OCC=y
+CONFIG_PECI=y
+CONFIG_PECI_CPU=y
+CONFIG_PECI_ASPEED=y
 CONFIG_EXT4_FS=y
 CONFIG_FANOTIFY=y
 CONFIG_OVERLAY_FS=y
+CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
 # CONFIG_JFFS2_FS_WRITEBUFFER is not set
@@ -261,6 +276,9 @@ CONFIG_PSTORE_PMSG=y
 CONFIG_PSTORE_FTRACE=y
 CONFIG_PSTORE_RAM=y
 # CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_SECURITYFS is not set
 CONFIG_HARDENED_USERCOPY=y
 CONFIG_FORTIFY_SOURCE=y
 CONFIG_CRYPTO_HMAC=y
@@ -273,9 +291,8 @@ CONFIG_CRYPTO_USER_API_HASH=y
 # CONFIG_XZ_DEC_SPARC is not set
 CONFIG_PRINTK_TIME=y
 CONFIG_DYNAMIC_DEBUG=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_INFO_REDUCED=y
 CONFIG_DEBUG_INFO_DWARF4=y
+CONFIG_DEBUG_INFO_REDUCED=y
 CONFIG_GDB_SCRIPTS=y
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_FS=y
diff --git a/arch/arm/configs/assabet_defconfig b/arch/arm/configs/assabet_defconfig
index 04c86ff558da..8ba8eb7a4adf 100644
--- a/arch/arm/configs/assabet_defconfig
+++ b/arch/arm/configs/assabet_defconfig
@@ -1,25 +1,21 @@
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
+CONFIG_ARCH_MULTI_V4=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_SA1100=y
 CONFIG_SA1100_ASSABET=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_SA1100=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttySA0,38400n8 initrd=0xc0800000,3M root=/dev/ram"
 CONFIG_FPE_NWFPE=y
 CONFIG_PM=y
+CONFIG_MODULES=y
+CONFIG_PARTITION_ADVANCED=y
 CONFIG_NET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
 # CONFIG_IPV6 is not set
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_SA1100_FIR=m
+CONFIG_PCCARD=y
+CONFIG_PCMCIA_SA1100=y
 CONFIG_MTD=y
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_BLOCK=y
@@ -46,11 +42,14 @@ CONFIG_FB=y
 CONFIG_FB_SA1100=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_SOUND=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_CPU=y
 CONFIG_EXT2_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_NFS_FS=y
-CONFIG_PARTITION_ADVANCED=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index 549d01be0b47..9ea08337b174 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -1,14 +1,13 @@
 # CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
 CONFIG_ARCH_MULTI_V4T=y
 CONFIG_ARCH_MULTI_V5=y
 # CONFIG_ARCH_MULTI_V7 is not set
@@ -26,8 +25,9 @@ CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 r
 CONFIG_KEXEC=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_SWAP is not set
+CONFIG_SLAB=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -40,7 +40,6 @@ CONFIG_IP_PNP_RARP=y
 # CONFIG_INET_DIAG is not set
 CONFIG_IPV6_SIT_6RD=y
 CONFIG_CAN=y
-CONFIG_CAN_AT91=y
 CONFIG_CFG80211=y
 CONFIG_MAC80211=y
 CONFIG_DEVTMPFS=y
@@ -50,13 +49,13 @@ CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
 CONFIG_MTD_TESTS=m
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
 CONFIG_MTD_DATAFLASH=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_ATMEL=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_UBI=y
 CONFIG_MTD_UBI_FASTMAP=y
+CONFIG_MTD_UBI_BLOCK=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=4
@@ -65,6 +64,7 @@ CONFIG_ATMEL_SSC=y
 CONFIG_EEPROM_AT24=m
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -80,6 +80,7 @@ CONFIG_DM9000=y
 # CONFIG_NET_VENDOR_STMICRO is not set
 CONFIG_DAVICOM_PHY=y
 CONFIG_MICREL_PHY=y
+CONFIG_CAN_AT91=y
 CONFIG_LIBERTAS=m
 CONFIG_LIBERTAS_SDIO=m
 CONFIG_LIBERTAS_SPI=m
@@ -138,9 +139,9 @@ CONFIG_MEDIA_USB_SUPPORT=y
 CONFIG_USB_VIDEO_CLASS=m
 CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_VIDEO_ATMEL_ISI=y
+CONFIG_VIDEO_MT9V032=m
 CONFIG_VIDEO_OV2640=m
 CONFIG_VIDEO_OV7740=m
-CONFIG_VIDEO_MT9V032=m
 CONFIG_DRM=y
 CONFIG_DRM_ATMEL_HLCDC=y
 CONFIG_DRM_PANEL_SIMPLE=y
@@ -195,7 +196,6 @@ CONFIG_RTC_DRV_AT91SAM9=y
 CONFIG_DMADEVICES=y
 CONFIG_AT_HDMAC=y
 CONFIG_AT_XDMAC=y
-CONFIG_MICROCHIP_PIT64B=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_IIO=y
 CONFIG_AT91_ADC=y
@@ -206,6 +206,7 @@ CONFIG_PWM_ATMEL_HLCDC_PWM=y
 CONFIG_PWM_ATMEL_TCB=y
 CONFIG_EXT4_FS=y
 CONFIG_FANOTIFY=y
+CONFIG_AUTOFS_FS=m
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_UBIFS_FS=y
diff --git a/arch/arm/configs/axm55xx_defconfig b/arch/arm/configs/axm55xx_defconfig
index 46075216ee6d..bfbaa2df3be5 100644
--- a/arch/arm/configs/axm55xx_defconfig
+++ b/arch/arm/configs/axm55xx_defconfig
@@ -3,6 +3,7 @@ CONFIG_POSIX_MQUEUE=y
 CONFIG_FHANDLE=y
 CONFIG_AUDIT=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_TASKSTATS=y
@@ -21,12 +22,8 @@ CONFIG_SCHED_AUTOGROUP=y
 CONFIG_RELAY=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
-# CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
 CONFIG_ARCH_AXXIA=y
-CONFIG_GPIO_PCA953X=y
 CONFIG_ARM_LPAE=y
 CONFIG_ARM_THUMBEE=y
 CONFIG_ARM_ERRATA_430973=y
@@ -37,26 +34,24 @@ CONFIG_ARM_ERRATA_754327=y
 CONFIG_ARM_ERRATA_764369=y
 CONFIG_ARM_ERRATA_775420=y
 CONFIG_ARM_ERRATA_798181=y
-CONFIG_PCI=y
-CONFIG_PCI_MSI=y
 CONFIG_PCIE_AXXIA=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=16
 CONFIG_HOTPLUG_CPU=y
-CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
 CONFIG_HIGHMEM=y
-CONFIG_KSM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_VFP=y
 CONFIG_NEON=y
+# CONFIG_SUSPEND is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_BINFMT_MISC=y
-# CONFIG_SUSPEND is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_KSM=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -76,6 +71,8 @@ CONFIG_INET_IPCOMP=y
 CONFIG_NETWORK_PHY_TIMESTAMPING=y
 CONFIG_BRIDGE=y
 # CONFIG_WIRELESS is not set
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
@@ -142,9 +139,10 @@ CONFIG_DP83640_PHY=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_PL061=y
-CONFIG_POWER_SUPPLY=y
+CONFIG_GPIO_PCA953X=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_AXXIA=y
+CONFIG_POWER_SUPPLY=y
 CONFIG_SENSORS_ADT7475=y
 CONFIG_SENSORS_JC42=y
 CONFIG_SENSORS_LM75=y
@@ -224,8 +222,9 @@ CONFIG_NFS_FSCACHE=y
 CONFIG_SUNRPC_DEBUG=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
+CONFIG_CRYPTO_XCBC=y
 CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_DEBUG_FS=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_SCHED_DEBUG is not set
@@ -233,6 +232,5 @@ CONFIG_RCU_CPU_STALL_TIMEOUT=60
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_USER=y
 CONFIG_CRYPTO_GCM=y
-CONFIG_CRYPTO_XCBC=y
 CONFIG_CRYPTO_SHA256=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig
index d9119da65f48..337e5c9718ae 100644
--- a/arch/arm/configs/badge4_defconfig
+++ b/arch/arm/configs/badge4_defconfig
@@ -1,26 +1,22 @@
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_EXPERT=y
-CONFIG_MODULES=y
-CONFIG_MODVERSIONS=y
+CONFIG_ARCH_MULTI_V4=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_SA1100=y
 CONFIG_SA1100_BADGE4=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="init=/linuxrc root=/dev/mtdblock3"
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=m
+CONFIG_MODULES=y
+CONFIG_MODVERSIONS=y
+CONFIG_PARTITION_ADVANCED=y
 CONFIG_BINFMT_MISC=m
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
 # CONFIG_IPV6 is not set
-CONFIG_IRDA=y
-CONFIG_IRLAN=y
-CONFIG_IRCOMM=y
-CONFIG_IRDA_ULTRA=y
-CONFIG_SA1100_FIR=y
 CONFIG_BT=m
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIVHCI=m
@@ -101,10 +97,9 @@ CONFIG_MINIX_FS=m
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 CONFIG_SMB_FS=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
index a9ed79b7f871..a51babd178c2 100644
--- a/arch/arm/configs/bcm2835_defconfig
+++ b/arch/arm/configs/bcm2835_defconfig
@@ -1,7 +1,8 @@
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_LOG_BUF_SHIFT=18
@@ -19,19 +20,12 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
-# CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
-CONFIG_JUMP_LABEL=y
 CONFIG_CC_STACKPROTECTOR_REGULAR=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
 CONFIG_ARCH_MULTI_V6=y
 CONFIG_ARCH_BCM=y
 CONFIG_ARCH_BCM2835=y
-CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_AEABI=y
-CONFIG_KSM=y
-CONFIG_CMA=y
 CONFIG_SECCOMP=y
 CONFIG_KEXEC=y
 CONFIG_CRASH_DUMP=y
@@ -44,9 +38,15 @@ CONFIG_CPU_FREQ_GOV_ONDEMAND=y
 CONFIG_CPUFREQ_DT=y
 CONFIG_ARM_RASPBERRYPI_CPUFREQ=y
 CONFIG_VFP=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_SUSPEND is not set
 CONFIG_PM=y
+CONFIG_JUMP_LABEL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_KSM=y
+CONFIG_CMA=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -63,8 +63,7 @@ CONFIG_MAC80211=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_STANDALONE is not set
-CONFIG_DMA_CMA=y
-CONFIG_CMA_SIZE_MBYTES=32
+CONFIG_RASPBERRYPI_FIRMWARE=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_CONSTANTS=y
@@ -106,6 +105,7 @@ CONFIG_REGULATOR_GPIO=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_DRM=y
+CONFIG_DRM_V3D=y
 CONFIG_DRM_VC4=y
 CONFIG_FB_SIMPLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
@@ -151,7 +151,6 @@ CONFIG_BCM2835_MBOX=y
 CONFIG_RASPBERRYPI_POWER=y
 CONFIG_PWM=y
 CONFIG_PWM_BCM2835=y
-CONFIG_RASPBERRYPI_FIRMWARE=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
@@ -170,20 +169,22 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
+# CONFIG_XZ_DEC_ARM is not set
+# CONFIG_XZ_DEC_ARMTHUMB is not set
+CONFIG_DMA_CMA=y
+CONFIG_CMA_SIZE_MBYTES=32
 CONFIG_PRINTK_TIME=y
 CONFIG_BOOT_PRINTK_DELAY=y
 CONFIG_DYNAMIC_DEBUG=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_LOCKUP_DETECTOR=y
-CONFIG_SCHED_TRACER=y
-CONFIG_STACK_TRACER=y
-CONFIG_FUNCTION_PROFILER=y
-CONFIG_TEST_KSTRTOX=y
 CONFIG_DEBUG_FS=y
 CONFIG_KGDB=y
 CONFIG_KGDB_KDB=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_FUNCTION_PROFILER=y
+CONFIG_STACK_TRACER=y
+CONFIG_SCHED_TRACER=y
 CONFIG_STRICT_DEVMEM=y
-# CONFIG_XZ_DEC_ARM is not set
-# CONFIG_XZ_DEC_ARMTHUMB is not set
+CONFIG_TEST_KSTRTOX=y
diff --git a/arch/arm/configs/cerfcube_defconfig b/arch/arm/configs/cerfcube_defconfig
index 3f910bbf1bfd..9ada868e2648 100644
--- a/arch/arm/configs/cerfcube_defconfig
+++ b/arch/arm/configs/cerfcube_defconfig
@@ -1,23 +1,21 @@
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_ARCH_MULTI_V4=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_SA1100=y
 CONFIG_SA1100_CERF=y
 CONFIG_SA1100_CERF_FLASH_16MB=y
-CONFIG_PCCARD=m
-CONFIG_PCMCIA_SA1100=m
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="console=ttySA0,38400 root=/dev/mtdblock3 rootfstype=jffs2 rw mem=32M init=/linuxrc"
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=m
 CONFIG_FPE_FASTFPE=y
 CONFIG_PM=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -27,9 +25,11 @@ CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
 # CONFIG_IPV6 is not set
+CONFIG_PCCARD=m
+CONFIG_PCMCIA_SA1100=m
 CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
@@ -47,6 +47,10 @@ CONFIG_SERIAL_SA1100_CONSOLE=y
 CONFIG_WATCHDOG=y
 CONFIG_SA1100_WATCHDOG=m
 # CONFIG_VGA_CONSOLE is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_CPU=y
 CONFIG_EXT2_FS=m
 CONFIG_EXT3_FS=m
 CONFIG_MSDOS_FS=m
@@ -60,11 +64,10 @@ CONFIG_NFS_V4=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V4=y
 CONFIG_SMB_FS=m
-CONFIG_PARTITION_ADVANCED=y
 CONFIG_NLS=y
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_ISO8859_1=m
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/clps711x_defconfig b/arch/arm/configs/clps711x_defconfig
index 63a153f5cf68..92481b2a88fa 100644
--- a/arch/arm/configs/clps711x_defconfig
+++ b/arch/arm/configs/clps711x_defconfig
@@ -4,7 +4,6 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_RD_LZMA=y
 CONFIG_EMBEDDED=y
-CONFIG_SLOB=y
 CONFIG_JUMP_LABEL=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARCH_CLPS711X=y
@@ -14,16 +13,13 @@ CONFIG_ARCH_CLEP7312=y
 CONFIG_ARCH_EDB7211=y
 CONFIG_ARCH_P720T=y
 CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 # CONFIG_COREDUMP is not set
+CONFIG_SLOB=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
 # CONFIG_IPV6 is not set
-CONFIG_IRDA=y
-CONFIG_IRTTY_SIR=y
 # CONFIG_WIRELESS is not set
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig
index 45769d0ddd4e..95144e380b4b 100644
--- a/arch/arm/configs/cm_x300_defconfig
+++ b/arch/arm/configs/cm_x300_defconfig
@@ -1,28 +1,27 @@
 CONFIG_LOCALVERSION="-cm-x300"
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=18
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_PXA=y
-CONFIG_GPIO_PCA953X=y
 CONFIG_MACH_CM_X300=y
-CONFIG_NO_HZ=y
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="root=/dev/mtdblock5 rootfstype=ubifs console=ttyS2,38400"
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_FPE_NWFPE=y
 CONFIG_APM_EMULATION=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -54,6 +53,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_DM9000=y
@@ -79,6 +79,7 @@ CONFIG_I2C_PXA=y
 CONFIG_SPI=y
 CONFIG_SPI_GPIO=y
 CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_PCA953X=y
 # CONFIG_HWMON is not set
 CONFIG_PMIC_DA903X=y
 CONFIG_REGULATOR=y
@@ -90,8 +91,6 @@ CONFIG_LCD_TDO24M=y
 CONFIG_BACKLIGHT_DA903X=m
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_FONTS=y
-CONFIG_FONT_6x11=y
 CONFIG_LOGO=y
 CONFIG_SOUND=m
 CONFIG_SND=m
@@ -146,18 +145,19 @@ CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
 CONFIG_CIFS=m
-CONFIG_PARTITION_ADVANCED=y
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_ISO8859_1=m
-CONFIG_DEBUG_FS=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_T10DIF=y
+CONFIG_FONTS=y
+CONFIG_FONT_6x11=y
 CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_FS=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
 CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_AES=m
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_T10DIF=y
diff --git a/arch/arm/configs/cns3420vb_defconfig b/arch/arm/configs/cns3420vb_defconfig
index 63fa2eb21b75..b3aab97c0728 100644
--- a/arch/arm/configs/cns3420vb_defconfig
+++ b/arch/arm/configs/cns3420vb_defconfig
@@ -1,5 +1,4 @@
 # CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
@@ -9,23 +8,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_PERF_EVENTS is not set
-CONFIG_SLAB=y
 CONFIG_PROFILING=y
+CONFIG_ARCH_MULTI_V6=y
+CONFIG_ARCH_CNS3XXX=y
+CONFIG_MACH_CNS3420VB=y
+CONFIG_UNUSED_BOARD_FILES=y
+CONFIG_CMDLINE="console=ttyS0,38400 mem=128M root=/dev/mmcblk0p1 ro rootwait"
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
 CONFIG_IOSCHED_BFQ=m
-CONFIG_ARCH_MULTI_V6=y
 #CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_CNS3XXX=y
-CONFIG_MACH_CNS3420VB=y
 CONFIG_DEBUG_CNS3XXX=y
 CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,38400 mem=128M root=/dev/mmcblk0p1 ro rootwait"
+# CONFIG_SWAP is not set
+CONFIG_SLAB=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
@@ -36,6 +34,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=20000
 CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
 CONFIG_ATA=y
 # CONFIG_SATA_PMP is not set
 # CONFIG_ATA_SFF is not set
@@ -43,9 +42,9 @@ CONFIG_ATA=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
+CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
 # CONFIG_VGA_CONSOLE is not set
@@ -59,6 +58,6 @@ CONFIG_AUTOFS4_FS=y
 CONFIG_FSCACHE=y
 CONFIG_TMPFS=y
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
 # CONFIG_ARM_UNWIND is not set
 CONFIG_CRC_CCITT=y
+CONFIG_DEBUG_FS=y
diff --git a/arch/arm/configs/colibri_pxa270_defconfig b/arch/arm/configs/colibri_pxa270_defconfig
index 52bad9a544a0..8357d721c69c 100644
--- a/arch/arm/configs/colibri_pxa270_defconfig
+++ b/arch/arm/configs/colibri_pxa270_defconfig
@@ -1,5 +1,6 @@
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_PREEMPT=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_IKCONFIG=y
@@ -9,19 +10,20 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
+# CONFIG_ARCH_MULTI_V7 is not set
+CONFIG_ARCH_PXA=y
+CONFIG_MACH_COLIBRI=y
+CONFIG_AEABI=y
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_COLIBRI=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
 CONFIG_FPE_NWFPE=y
 CONFIG_PM=y
+CONFIG_SLAB=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -34,13 +36,6 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
 CONFIG_VLAN_8021Q=m
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRCOMM=m
-CONFIG_IRDA_ULTRA=y
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-CONFIG_IRTTY_SIR=m
 CONFIG_BT=m
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
@@ -63,22 +58,22 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PXA2XX=y
 CONFIG_MTD_BLOCK2MTD=y
+CONFIG_MTD_ONENAND=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_DISKONCHIP=y
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
 CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
-CONFIG_MTD_ONENAND=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=8
 CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
 CONFIG_NET_ETHERNET=y
 CONFIG_DM9000=y
+CONFIG_PHYLIB=y
 CONFIG_HOSTAP=y
 CONFIG_HOSTAP_FIRMWARE=y
 CONFIG_HOSTAP_FIRMWARE_NVRAM=y
@@ -106,9 +101,6 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_USB_HID is not set
 CONFIG_USB=y
@@ -142,13 +134,8 @@ CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=m
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_UTF8=m
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_KEYS=y
 CONFIG_SECURITY=y
 CONFIG_CRYPTO_PCBC=m
@@ -160,3 +147,11 @@ CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
 CONFIG_LIBCRC32C=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_PRINTK_TIME=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/colibri_pxa300_defconfig b/arch/arm/configs/colibri_pxa300_defconfig
index 26e5a67f8e2d..42adfefdb6dc 100644
--- a/arch/arm/configs/colibri_pxa300_defconfig
+++ b/arch/arm/configs/colibri_pxa300_defconfig
@@ -1,12 +1,13 @@
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_PXA=y
 CONFIG_MACH_COLIBRI300=y
 CONFIG_AEABI=y
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="console=ttyS0,115200 rw"
 CONFIG_CPU_IDLE=y
 CONFIG_FPE_NWFPE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
 CONFIG_NET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
@@ -17,6 +18,7 @@ CONFIG_IPV6=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_SG=y
+# CONFIG_BLK_DEV_BSG is not set
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_AX88796=y
@@ -47,12 +49,12 @@ CONFIG_EXT3_FS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_AES=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_ARC4=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig
index 36384fd575f8..2a2d2cb3ce2e 100644
--- a/arch/arm/configs/collie_defconfig
+++ b/arch/arm/configs/collie_defconfig
@@ -1,4 +1,3 @@
-# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
@@ -6,22 +5,23 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 # CONFIG_BASE_FULL is not set
 # CONFIG_EPOLL is not set
-CONFIG_SLOB=y
+CONFIG_ARCH_MULTI_V4=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_SA1100=y
 CONFIG_SA1100_COLLIE=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_SA1100=y
-CONFIG_PCMCIA_DEBUG=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="noinitrd root=/dev/mtdblock2 rootfstype=jffs2 fbcon=rotate:1"
 CONFIG_FPE_NWFPE=y
 CONFIG_PM=y
+# CONFIG_SWAP is not set
+CONFIG_SLOB=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
 # CONFIG_IPV6 is not set
+CONFIG_PCCARD=y
+CONFIG_PCMCIA_SA1100=y
+CONFIG_PCMCIA_DEBUG=y
 CONFIG_MTD=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
@@ -48,12 +48,12 @@ CONFIG_KEYBOARD_LOCOMO=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_SERIO_SERPORT is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CS=y
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HWMON is not set
 CONFIG_MCP_SA11X0=y
 CONFIG_MCP_UCB1200=y
@@ -64,8 +64,6 @@ CONFIG_FB_SA1100=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_MINI_4x6=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_LOCOMO=y
@@ -80,9 +78,11 @@ CONFIG_ROMFS_FS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
+CONFIG_CRC_CCITT=y
+CONFIG_FONTS=y
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DETECT_SOFTLOCKUP is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig
index 15b749f6996d..df84640f4f57 100644
--- a/arch/arm/configs/corgi_defconfig
+++ b/arch/arm/configs/corgi_defconfig
@@ -1,28 +1,25 @@
 CONFIG_SYSVIPC=y
+CONFIG_PREEMPT=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
 CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_PXA=y
 CONFIG_PXA_SHARPSL=y
 CONFIG_MACH_POODLE=y
 CONFIG_MACH_CORGI=y
 CONFIG_MACH_SHEPHERD=y
 CONFIG_MACH_HUSKY=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_PXA2XX=y
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   debug"
 CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=m
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
 CONFIG_BINFMT_MISC=m
 CONFIG_PM=y
 CONFIG_NET=y
@@ -57,11 +54,6 @@ CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-CONFIG_PXA_FICP=m
 CONFIG_BT=m
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
@@ -80,6 +72,8 @@ CONFIG_BT_HCIBT3C=m
 CONFIG_BT_HCIBLUECARD=m
 CONFIG_BT_HCIBTUART=m
 CONFIG_BT_HCIVHCI=m
+CONFIG_PCCARD=y
+CONFIG_PCMCIA_PXA2XX=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
@@ -94,10 +88,15 @@ CONFIG_CHR_DEV_OSST=m
 CONFIG_BLK_DEV_SR=m
 CONFIG_CHR_DEV_SG=m
 CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_BLK_DEV_BSG is not set
 CONFIG_ATA=y
 CONFIG_PATA_PCMCIA=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
+CONFIG_PCMCIA_PCNET=m
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_ASYNC=m
 CONFIG_USB_CATC=m
 CONFIG_USB_KAWETH=m
 CONFIG_USB_PEGASUS=m
@@ -105,10 +104,6 @@ CONFIG_USB_RTL8150=m
 CONFIG_USB_USBNET=m
 # CONFIG_USB_NET_CDC_SUBSET is not set
 CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_BSDCOMP=m
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=y
@@ -119,11 +114,11 @@ CONFIG_TOUCHSCREEN_ADS7846=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_UINPUT=m
 # CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=m
 CONFIG_SERIAL_8250_CS=m
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 CONFIG_I2C=y
 CONFIG_I2C_PXA=y
 CONFIG_SPI=y
@@ -135,13 +130,8 @@ CONFIG_LCD_CORGI=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_SOUND=y
 CONFIG_SOUND_PRIME=y
-CONFIG_USB_KBD=m
-CONFIG_USB_MOUSE=m
 CONFIG_HID_A4TECH=m
 CONFIG_HID_APPLE=m
 CONFIG_HID_BELKIN=m
@@ -158,6 +148,8 @@ CONFIG_HID_PETALYNX=m
 CONFIG_HID_SAMSUNG=m
 CONFIG_HID_SONY=m
 CONFIG_HID_SUNPLUS=m
+CONFIG_USB_KBD=m
+CONFIG_USB_MOUSE=m
 CONFIG_USB=m
 CONFIG_USB_MON=m
 CONFIG_USB_SL811_HCD=m
@@ -219,16 +211,12 @@ CONFIG_NFS_V3=y
 CONFIG_NFS_V4=y
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_PARTITION_ADVANCED=y
+CONFIG_NFS_V4=m
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_LL=y
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_ECB=m
@@ -251,3 +239,9 @@ CONFIG_CRYPTO_TWOFISH=m
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRC_CCITT=y
 CONFIG_LIBCRC32C=m
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_FTRACE is not set
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index e849367c0566..821d966c95a5 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -1,8 +1,8 @@
-# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -10,34 +10,16 @@ CONFIG_CGROUPS=y
 CONFIG_CHECKPOINT_RESTORE=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V7=n
 CONFIG_ARCH_MULTI_V5=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_DAVINCI=y
-CONFIG_ARCH_DAVINCI_DM644x=y
-CONFIG_ARCH_DAVINCI_DM355=y
-CONFIG_ARCH_DAVINCI_DM646x=y
 CONFIG_ARCH_DAVINCI_DA830=y
 CONFIG_ARCH_DAVINCI_DA850=y
-CONFIG_ARCH_DAVINCI_DM365=y
-CONFIG_MACH_SFFSDR=y
-CONFIG_MACH_NEUROS_OSD2=y
-CONFIG_MACH_DM355_LEOPARD=y
-CONFIG_MACH_MITYOMAPL138=y
-CONFIG_MACH_OMAPL138_HAWKBOARD=y
 CONFIG_DAVINCI_MUX_DEBUG=y
 CONFIG_DAVINCI_MUX_WARNINGS=y
-CONFIG_PREEMPT=y
 CONFIG_AEABI=y
-CONFIG_CMA=y
 CONFIG_SECCOMP=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_AUTO_ZRELADDR=y
@@ -48,6 +30,13 @@ CONFIG_CPU_FREQ_GOV_POWERSAVE=m
 CONFIG_CPU_FREQ_GOV_ONDEMAND=m
 CONFIG_CPUFREQ_DT=m
 CONFIG_CPU_IDLE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_SWAP is not set
+CONFIG_CMA=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -65,7 +54,6 @@ CONFIG_BT_HCIUART_LL=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_FW_LOADER=m
-CONFIG_DMA_CMA=y
 CONFIG_DA8XX_MSTPRI=y
 CONFIG_MTD=m
 CONFIG_MTD_TESTS=m
@@ -95,8 +83,8 @@ CONFIG_NETCONSOLE=y
 CONFIG_TUN=m
 CONFIG_DM9000=y
 CONFIG_TI_DAVINCI_EMAC=y
-CONFIG_LSI_ET1011C_PHY=y
 CONFIG_LXT_PHY=y
+CONFIG_LSI_ET1011C_PHY=y
 CONFIG_SMSC_PHY=y
 CONFIG_PPP=m
 CONFIG_PPP_DEFLATE=m
@@ -113,7 +101,6 @@ CONFIG_KEYBOARD_XTKBD=m
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_PWM_BEEPER=m
-CONFIG_INPUT_DM355EVM=m
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_VT_CONSOLE is not set
 CONFIG_SERIAL_8250=y
@@ -141,7 +128,6 @@ CONFIG_SYSCON_REBOOT_MODE=m
 CONFIG_BATTERY_LEGO_EV3=m
 CONFIG_WATCHDOG=y
 CONFIG_DAVINCI_WATCHDOG=y
-CONFIG_MFD_DM355EVM_MSP=y
 CONFIG_TPS6507X=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
@@ -258,15 +244,15 @@ CONFIG_MINIX_FS=m
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=m
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=m
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_T10DIF=m
+CONFIG_DMA_CMA=y
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_RT_MUTEXES=y
 CONFIG_DEBUG_MUTEXES=y
 # CONFIG_ARM_UNWIND is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_T10DIF=m
diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig
index 33074fdab2ea..ff37f46c82fb 100644
--- a/arch/arm/configs/dove_defconfig
+++ b/arch/arm/configs/dove_defconfig
@@ -1,27 +1,23 @@
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ARCH_MULTI_V6 is not set
+CONFIG_ARCH_MULTI_V7=y
 CONFIG_ARCH_DOVE=y
 CONFIG_MACH_DOVE_DB=y
 CONFIG_MACH_CM_A510=y
 CONFIG_MACH_DOVE_DT=y
-CONFIG_PCI=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MVEBU=y
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_VFP=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_SLAB=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -31,6 +27,9 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IPV6 is not set
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_MVEBU=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
@@ -51,6 +50,7 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=1
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_ATA=y
 CONFIG_SATA_MV=y
@@ -115,14 +115,7 @@ CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
 CONFIG_NLS_UTF8=y
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-# CONFIG_SCHED_DEBUG is not set
 CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
 CONFIG_CRYPTO_NULL=y
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_PCBC=m
@@ -140,3 +133,10 @@ CONFIG_CRYPTO_LZO=y
 CONFIG_CRYPTO_DEV_MARVELL_CESA=y
 CONFIG_CRC_CCITT=y
 CONFIG_LIBCRC32C=y
+CONFIG_PRINTK_TIME=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig
index 88d5ecc2121e..3154125321c5 100644
--- a/arch/arm/configs/ep93xx_defconfig
+++ b/arch/arm/configs/ep93xx_defconfig
@@ -5,14 +5,9 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
+CONFIG_ARCH_MULTI_V4T=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_EP93XX=y
-CONFIG_MACH_ADSSPHERE=y
 CONFIG_MACH_EDB9301=y
 CONFIG_MACH_EDB9302=y
 CONFIG_MACH_EDB9302A=y
@@ -21,19 +16,15 @@ CONFIG_MACH_EDB9307A=y
 CONFIG_MACH_EDB9312=y
 CONFIG_MACH_EDB9315=y
 CONFIG_MACH_EDB9315A=y
-CONFIG_MACH_GESBC9312=y
-CONFIG_MACH_MICRO9H=y
-CONFIG_MACH_MICRO9M=y
-CONFIG_MACH_MICRO9L=y
-CONFIG_MACH_MICRO9S=y
-CONFIG_MACH_SIM_ONE=y
-CONFIG_MACH_SNAPPER_CL15=y
 CONFIG_MACH_TS72XX=y
 CONFIG_MACH_VISION_EP9307=y
 CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/nfs ip=bootp"
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_SLAB=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -50,8 +41,8 @@ CONFIG_IPV6=y
 # CONFIG_IPV6_SIT is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
@@ -66,6 +57,7 @@ CONFIG_EEPROM_LEGACY=y
 CONFIG_SCSI=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
 CONFIG_NETDEVICES=y
 CONFIG_EP93XX_ETH=y
 CONFIG_USB_RTL8150=y
@@ -122,6 +114,7 @@ CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
+CONFIG_LIBCRC32C=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_SLAB=y
 CONFIG_DEBUG_SPINLOCK=y
@@ -129,4 +122,3 @@ CONFIG_DEBUG_MUTEXES=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/eseries_pxa_defconfig b/arch/arm/configs/eseries_pxa_defconfig
index 046f4dc2e18e..b4c2e6457e04 100644
--- a/arch/arm/configs/eseries_pxa_defconfig
+++ b/arch/arm/configs/eseries_pxa_defconfig
@@ -3,41 +3,33 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_PXA=y
 CONFIG_ARCH_PXA_ESERIES=y
-# CONFIG_ARM_THUMB is not set
 CONFIG_IWMMXT=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_PXA2XX=m
 CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_KEXEC=y
 CONFIG_FPE_NWFPE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
 CONFIG_BINFMT_MISC=y
 CONFIG_PM=y
+CONFIG_SLAB=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_NET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
 # CONFIG_IPV6 is not set
-CONFIG_IRDA=y
-CONFIG_IRLAN=m
-CONFIG_IRCOMM=m
-CONFIG_IRDA_ULTRA=y
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-CONFIG_PXA_FICP=y
 CONFIG_CFG80211=m
 CONFIG_MAC80211=m
 CONFIG_MAC80211_RC_PID=y
 # CONFIG_MAC80211_RC_MINSTREL is not set
+CONFIG_PCCARD=y
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_PXA2XX=m
 # CONFIG_STANDALONE is not set
 CONFIG_MTD=m
 CONFIG_MTD_RAW_NAND=m
@@ -45,6 +37,7 @@ CONFIG_MTD_NAND_TMIO=m
 CONFIG_BLK_DEV_LOOP=m
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=m
+# CONFIG_BLK_DEV_BSG is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_ATA=m
 # CONFIG_SATA_PMP is not set
@@ -61,8 +54,8 @@ CONFIG_KEYBOARD_GPIO=m
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_WM97XX=m
 # CONFIG_SERIO is not set
-CONFIG_SERIAL_PXA=y
 # CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_PXA=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
 CONFIG_MFD_T7L66XB=y
@@ -75,8 +68,6 @@ CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_MINI_4x6=y
 CONFIG_SOUND=y
 CONFIG_SND=m
 CONFIG_SND_MIXER_OSS=m
@@ -96,10 +87,11 @@ CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-CONFIG_PARTITION_ADVANCED=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_CRYPTO_CBC=m
 CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_FONTS=y
+CONFIG_FONT_MINI_4x6=y
diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
index cae09010a799..31e8e0c0ee1b 100644
--- a/arch/arm/configs/exynos_defconfig
+++ b/arch/arm/configs/exynos_defconfig
@@ -1,5 +1,5 @@
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_CGROUPS=y
@@ -13,12 +13,9 @@ CONFIG_BIG_LITTLE=y
 CONFIG_NR_CPUS=8
 CONFIG_HIGHMEM=y
 CONFIG_SECCOMP=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M"
-CONFIG_ENERGY_MODEL=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
@@ -34,7 +31,7 @@ CONFIG_NEON=y
 CONFIG_KERNEL_MODE_NEON=y
 CONFIG_PM_DEBUG=y
 CONFIG_PM_ADVANCED_DEBUG=y
-CONFIG_ARM_CRYPTO=y
+CONFIG_ENERGY_MODEL=y
 CONFIG_CRYPTO_SHA1_ARM_NEON=m
 CONFIG_CRYPTO_SHA256_ARM=m
 CONFIG_CRYPTO_SHA512_ARM=m
@@ -158,6 +155,7 @@ CONFIG_CHARGER_MAX14577=y
 CONFIG_CHARGER_MAX77693=y
 CONFIG_CHARGER_MAX8997=y
 CONFIG_CHARGER_MAX8998=y
+CONFIG_CHARGER_SMB347=y
 CONFIG_CHARGER_TPS65090=y
 CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_NTC_THERMISTOR=y
@@ -169,8 +167,6 @@ CONFIG_THERMAL_EMULATION=y
 CONFIG_WATCHDOG=y
 CONFIG_S3C2410_WATCHDOG=y
 CONFIG_MFD_CROS_EC_DEV=y
-CONFIG_CHROME_PLATFORMS=y
-CONFIG_CROS_EC=y
 CONFIG_MFD_MAX14577=y
 CONFIG_MFD_MAX77686=y
 CONFIG_MFD_MAX77693=y
@@ -206,19 +202,19 @@ CONFIG_MEDIA_PLATFORM_SUPPORT=y
 CONFIG_MEDIA_USB_SUPPORT=y
 CONFIG_USB_VIDEO_CLASS=m
 CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m
 CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS=m
 CONFIG_VIDEO_S5P_FIMC=m
 CONFIG_VIDEO_S5P_MIPI_CSIS=m
 CONFIG_VIDEO_EXYNOS_FIMC_LITE=m
 CONFIG_VIDEO_EXYNOS4_FIMC_IS=m
-CONFIG_V4L_MEM2MEM_DRIVERS=y
 CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m
 CONFIG_VIDEO_SAMSUNG_S5P_MFC=m
-CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m
 CONFIG_V4L_TEST_DRIVERS=y
 CONFIG_VIDEO_VIVID=m
-CONFIG_VIDEO_S5K6A3=m
 CONFIG_VIDEO_S5C73M3=m
+CONFIG_VIDEO_S5K6A3=m
 CONFIG_DRM=y
 CONFIG_DRM_EXYNOS=y
 CONFIG_DRM_EXYNOS_FIMD=y
@@ -294,11 +290,11 @@ CONFIG_MMC_DW_EXYNOS=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_CLASS_FLASH=y
-CONFIG_LEDS_AAT1290=y
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_PWM=y
-CONFIG_LEDS_MAX77693=y
 CONFIG_LEDS_MAX8997=y
+CONFIG_LEDS_AAT1290=y
+CONFIG_LEDS_MAX77693=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_MAX8998=y
@@ -308,6 +304,8 @@ CONFIG_RTC_DRV_S5M=y
 CONFIG_RTC_DRV_S3C=y
 CONFIG_DMADEVICES=y
 CONFIG_PL330_DMA=y
+CONFIG_CHROME_PLATFORMS=y
+CONFIG_CROS_EC=y
 CONFIG_CROS_EC_I2C=y
 CONFIG_CROS_EC_SPI=y
 CONFIG_COMMON_CLK_MAX77686=y
@@ -318,12 +316,12 @@ CONFIG_DEVFREQ_GOV_PERFORMANCE=y
 CONFIG_DEVFREQ_GOV_POWERSAVE=y
 CONFIG_DEVFREQ_GOV_USERSPACE=y
 CONFIG_ARM_EXYNOS_BUS_DEVFREQ=y
-CONFIG_EXYNOS5422_DMC=y
 CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP=y
 CONFIG_EXTCON=y
 CONFIG_EXTCON_MAX14577=y
 CONFIG_EXTCON_MAX77693=y
 CONFIG_EXTCON_MAX8997=y
+CONFIG_EXYNOS5422_DMC=y
 CONFIG_IIO=y
 CONFIG_EXYNOS_ADC=y
 CONFIG_STMPE_ADC=y
@@ -375,10 +373,10 @@ CONFIG_FONTS=y
 CONFIG_FONT_7x14=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DYNAMIC_DEBUG=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
 # CONFIG_DETECT_HUNG_TASK is not set
 CONFIG_PROVE_LOCKING=y
diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig
index ec84d80096b1..ef7b0a0aee3a 100644
--- a/arch/arm/configs/ezx_defconfig
+++ b/arch/arm/configs/ezx_defconfig
@@ -1,27 +1,21 @@
 CONFIG_LOCALVERSION="-ezx200910312315"
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_RD_BZIP2=y
 CONFIG_RD_LZMA=y
 CONFIG_EXPERT=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_PXA=y
 CONFIG_PXA_EZX=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
 CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug"
 CONFIG_KEXEC=y
 CONFIG_CPU_FREQ=y
@@ -31,10 +25,15 @@ CONFIG_CPU_FREQ_GOV_ONDEMAND=m
 CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
 CONFIG_CPU_IDLE=y
 CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
 CONFIG_PM=y
 CONFIG_APM_EMULATION=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_BINFMT_MISC=m
+CONFIG_SLAB=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -71,6 +70,7 @@ CONFIG_NF_CONNTRACK_SANE=m
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NF_CT_NETLINK=m
+CONFIG_NF_NAT=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_LED=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
@@ -112,7 +112,6 @@ CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_NF_NAT=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
@@ -178,15 +177,15 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-# CONFIG_WLAN is not set
 CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_FILTER=y
+CONFIG_PPP_MULTILINK=y
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
 # CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_WLAN is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
 CONFIG_KEYBOARD_GPIO=y
@@ -198,9 +197,9 @@ CONFIG_INPUT_MISC=y
 CONFIG_INPUT_UINPUT=y
 CONFIG_INPUT_PCAP=y
 # CONFIG_SERIO is not set
+CONFIG_LEGACY_PTY_COUNT=8
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=8
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
@@ -217,27 +216,27 @@ CONFIG_REGULATOR_PCAP=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_VIDEO_DEV=y
 CONFIG_MEDIA_TUNER_CUSTOMISE=y
+CONFIG_RADIO_TEA5764=y
+# CONFIG_MEDIA_TUNER_MC44S803 is not set
+# CONFIG_MEDIA_TUNER_MT2060 is not set
+# CONFIG_MEDIA_TUNER_MT20XX is not set
+# CONFIG_MEDIA_TUNER_MT2131 is not set
+# CONFIG_MEDIA_TUNER_MT2266 is not set
+# CONFIG_MEDIA_TUNER_MXL5005S is not set
+# CONFIG_MEDIA_TUNER_MXL5007T is not set
+# CONFIG_MEDIA_TUNER_QT1010 is not set
 # CONFIG_MEDIA_TUNER_SIMPLE is not set
-# CONFIG_MEDIA_TUNER_TDA8290 is not set
-# CONFIG_MEDIA_TUNER_TDA827X is not set
 # CONFIG_MEDIA_TUNER_TDA18271 is not set
+# CONFIG_MEDIA_TUNER_TDA827X is not set
+# CONFIG_MEDIA_TUNER_TDA8290 is not set
 # CONFIG_MEDIA_TUNER_TDA9887 is not set
 # CONFIG_MEDIA_TUNER_TEA5761 is not set
 # CONFIG_MEDIA_TUNER_TEA5767 is not set
-# CONFIG_MEDIA_TUNER_MT20XX is not set
-# CONFIG_MEDIA_TUNER_MT2060 is not set
-# CONFIG_MEDIA_TUNER_MT2266 is not set
-# CONFIG_MEDIA_TUNER_MT2131 is not set
-# CONFIG_MEDIA_TUNER_QT1010 is not set
 # CONFIG_MEDIA_TUNER_XC2028 is not set
 # CONFIG_MEDIA_TUNER_XC5000 is not set
-# CONFIG_MEDIA_TUNER_MXL5005S is not set
-# CONFIG_MEDIA_TUNER_MXL5007T is not set
-# CONFIG_MEDIA_TUNER_MC44S803 is not set
 # CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
 CONFIG_VIDEO_PXA27x=y
 # CONFIG_V4L_USB_DRIVERS is not set
-CONFIG_RADIO_TEA5764=y
 CONFIG_FB=y
 CONFIG_FB_PXA=y
 CONFIG_FB_PXA_OVERLAY=y
@@ -247,8 +246,6 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_PWM=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_MINI_4x6=y
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_MIXER_OSS=y
@@ -259,8 +256,8 @@ CONFIG_SND_PCM_OSS=y
 # CONFIG_SND_USB is not set
 CONFIG_SND_SOC=y
 CONFIG_SND_PXA2XX_SOC=y
-# CONFIG_USB_HID is not set
 CONFIG_HID_APPLE=m
+# CONFIG_USB_HID is not set
 CONFIG_USB=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_GADGET=y
@@ -309,7 +306,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_SMB_FS=m
 CONFIG_CIFS=m
@@ -354,14 +350,8 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
 CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_PROVE_LOCKING=y
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_TEST=m
@@ -389,3 +379,11 @@ CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_FONTS=y
+CONFIG_FONT_MINI_4x6=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_FS=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_PROVE_LOCKING=y
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/footbridge_defconfig b/arch/arm/configs/footbridge_defconfig
index 7a32de51f0fa..87c489337d0e 100644
--- a/arch/arm/configs/footbridge_defconfig
+++ b/arch/arm/configs/footbridge_defconfig
@@ -4,18 +4,17 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 # CONFIG_HOTPLUG is not set
-CONFIG_MODULES=y
+CONFIG_ARCH_MULTI_V4=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_FOOTBRIDGE=y
-CONFIG_ARCH_CATS=y
 CONFIG_ARCH_EBSA285_HOST=y
 CONFIG_ARCH_NETWINDER=y
-CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
-CONFIG_BINFMT_AOUT=y
+CONFIG_MODULES=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_ACORN_PARTITION=y
+CONFIG_ACORN_PARTITION_ADFS=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -26,15 +25,6 @@ CONFIG_IP_PNP_BOOTP=y
 CONFIG_SYN_COOKIES=y
 # CONFIG_IPV6 is not set
 CONFIG_ATM=y
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-CONFIG_IRDA_ULTRA=y
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-CONFIG_IRDA_DEBUG=y
-CONFIG_WINBOND_FIR=m
 CONFIG_PARPORT=y
 CONFIG_PARPORT_PC=y
 CONFIG_PARPORT_PC_FIFO=y
@@ -71,17 +61,17 @@ CONFIG_VORTEX=y
 CONFIG_NET_PCI=y
 CONFIG_NE2K_PCI=y
 CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
 CONFIG_PPPOE=m
+CONFIG_PPP_ASYNC=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SERIAL_NONSTANDARD=y
 CONFIG_SERIAL_21285=y
 CONFIG_SERIAL_21285_CONSOLE=y
+CONFIG_SERIAL_NONSTANDARD=y
 CONFIG_PRINTER=m
 CONFIG_DS1620=y
 CONFIG_NWBUTTON=y
@@ -99,6 +89,10 @@ CONFIG_SOUND=m
 CONFIG_USB=m
 CONFIG_USB_MON=m
 CONFIG_USB_PRINTER=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_EXT2_FS=y
 CONFIG_AUTOFS4_FS=y
 CONFIG_ISO9660_FS=m
@@ -109,9 +103,6 @@ CONFIG_ADFS_FS=m
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_ACORN_PARTITION=y
-CONFIG_ACORN_PARTITION_ADFS=y
 CONFIG_NLS=y
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_850=m
diff --git a/arch/arm/configs/gemini_defconfig b/arch/arm/configs/gemini_defconfig
index a7acfee11ffc..a80bc8a43091 100644
--- a/arch/arm/configs/gemini_defconfig
+++ b/arch/arm/configs/gemini_defconfig
@@ -49,11 +49,13 @@ CONFIG_ATA=y
 CONFIG_PATA_FTIDE010=y
 CONFIG_NETDEVICES=y
 CONFIG_TUN=y
+CONFIG_NET_DSA_REALTEK=y
 CONFIG_NET_DSA_REALTEK_SMI=y
+CONFIG_NET_DSA_REALTEK_RTL8366RB=y
 CONFIG_GEMINI_ETHERNET=y
+CONFIG_MARVELL_PHY=y
 CONFIG_MDIO_BITBANG=y
 CONFIG_MDIO_GPIO=y
-CONFIG_MARVELL_PHY=y
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
@@ -66,6 +68,7 @@ CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_I2C_GPIO=y
 CONFIG_SPI=y
 CONFIG_SPI_GPIO=y
+CONFIG_SENSORS_DRIVETEMP=y
 CONFIG_SENSORS_GPIO_FAN=y
 CONFIG_SENSORS_LM75=y
 CONFIG_THERMAL=y
diff --git a/arch/arm/configs/h3600_defconfig b/arch/arm/configs/h3600_defconfig
index c02b3e409610..4e272875c797 100644
--- a/arch/arm/configs/h3600_defconfig
+++ b/arch/arm/configs/h3600_defconfig
@@ -1,28 +1,23 @@
 CONFIG_SYSVIPC=y
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_MULTI_V4=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_SA1100=y
 CONFIG_SA1100_H3600=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_SA1100=y
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 # CONFIG_CPU_FREQ_STAT is not set
 CONFIG_FPE_NWFPE=y
+CONFIG_MODULES=y
 CONFIG_NET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
 # CONFIG_IPV6 is not set
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PCCARD=y
+CONFIG_PCMCIA_SA1100=y
 CONFIG_MTD=y
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_BLOCK=y
@@ -36,6 +31,7 @@ CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
 CONFIG_ATA=y
 CONFIG_PATA_PCMCIA=y
 CONFIG_NETDEVICES=y
diff --git a/arch/arm/configs/h5000_defconfig b/arch/arm/configs/h5000_defconfig
index f5a338fefda8..d01f1a6bd04d 100644
--- a/arch/arm/configs/h5000_defconfig
+++ b/arch/arm/configs/h5000_defconfig
@@ -5,21 +5,21 @@ CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
 # CONFIG_UID16 is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_PXA=y
 CONFIG_MACH_H5000=y
 CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="keepinitrd"
 CONFIG_KEXEC=y
 CONFIG_FPE_NWFPE=y
 CONFIG_PM=y
 CONFIG_APM_EMULATION=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_SLAB=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -42,9 +42,9 @@ CONFIG_MTD_PHYSMAP=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
+CONFIG_LEGACY_PTY_COUNT=32
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=32
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
 # CONFIG_VGA_CONSOLE is not set
@@ -59,11 +59,7 @@ CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
 # CONFIG_NETWORK_FILESYSTEMS is not set
-CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_FTRACE is not set
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_MD5=y
@@ -72,3 +68,7 @@ CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_DEFLATE=y
 # CONFIG_CRYPTO_HW is not set
 CONFIG_CRC_CCITT=y
+CONFIG_PRINTK_TIME=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_FTRACE is not set
diff --git a/arch/arm/configs/hackkit_defconfig b/arch/arm/configs/hackkit_defconfig
index 742d18cdabde..3c91a851fd08 100644
--- a/arch/arm/configs/hackkit_defconfig
+++ b/arch/arm/configs/hackkit_defconfig
@@ -1,17 +1,15 @@
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
+CONFIG_ARCH_MULTI_V4=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_SA1100=y
 CONFIG_SA1100_HACKKIT=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="console=ttySA0,115200 root=/dev/ram0 initrd=0xc0400000,8M init=/rootshell"
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=y
+CONFIG_MODULES=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -33,13 +31,17 @@ CONFIG_DUMMY=y
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
 # CONFIG_VGA_CONSOLE is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_CPU=y
 CONFIG_EXT2_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/hisi_defconfig b/arch/arm/configs/hisi_defconfig
index 74d611e41e02..0376a65e8bc1 100644
--- a/arch/arm/configs/hisi_defconfig
+++ b/arch/arm/configs/hisi_defconfig
@@ -1,24 +1,25 @@
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_RD_LZMA=y
 CONFIG_ARCH_HISI=y
 CONFIG_ARCH_HI3xxx=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_CMDLINE_PARTITION=y
-CONFIG_ARCH_HIX5HD2=y
 CONFIG_ARCH_HIP01=y
 CONFIG_ARCH_HIP04=y
+CONFIG_ARCH_HIX5HD2=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=16
-CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
 CONFIG_PM=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_CMDLINE_PARTITION=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -39,20 +40,20 @@ CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=2
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 CONFIG_SPI=y
 CONFIG_SPI_PL022=y
 CONFIG_PINCTRL_SINGLE=y
-CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIOLIB=y
-CONFIG_GPIO_GENERIC_PLATFORM=y
 CONFIG_REGULATOR_GPIO=y
+CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_DWAPB=y
 CONFIG_MFD_SYSCON=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
 CONFIG_POWER_RESET_SYSCON=y
 CONFIG_DRM=y
 CONFIG_FB_SIMPLE=y
@@ -66,13 +67,13 @@ CONFIG_USB_OHCI_HCD_PLATFORM=y
 CONFIG_USB_STORAGE=y
 CONFIG_NOP_USB_XCEIV=y
 CONFIG_MMC=y
-CONFIG_RTC_CLASS=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_DW_PLTFM=y
+CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_PL031=y
 CONFIG_DMADEVICES=y
-CONFIG_DW_DMAC=y
 CONFIG_PL330_DMA=y
+CONFIG_DW_DMAC=y
 CONFIG_PWM=y
 CONFIG_PHY_HIX5HD2_SATA=y
 CONFIG_EXT4_FS=y
@@ -81,11 +82,10 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_FS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOCKUP_DETECTOR=y
-CONFIG_VFP=y
 CONFIG_VFPv3=y
+CONFIG_DEBUG_FS=y
diff --git a/arch/arm/configs/imote2_defconfig b/arch/arm/configs/imote2_defconfig
deleted file mode 100644
index 6db871d4e077..000000000000
--- a/arch/arm/configs/imote2_defconfig
+++ /dev/null
@@ -1,366 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_EXPERT=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_INTELMOTE2=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=jffs2 console=ttyS2,115200 mem=32M"
-CONFIG_KEXEC=y
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-CONFIG_PM=y
-CONFIG_APM_EMULATION=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_IPV6_SUBTREES=y
-CONFIG_NETFILTER=y
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_SCTP=y
-CONFIG_NF_CT_PROTO_UDPLITE=y
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_LED=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_NF_NAT=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_BRIDGE=m
-# CONFIG_BRIDGE_IGMP_SNOOPING is not set
-CONFIG_IEEE802154=y
-# CONFIG_WIRELESS is not set
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_FW_LOADER=m
-CONFIG_CONNECTOR=m
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_AFS_PARTS=y
-CONFIG_MTD_AR7_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_CFI_I2 is not set
-CONFIG_MTD_OTP=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PXA2XX=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-# CONFIG_WLAN is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_PXA27x=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=y
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=8
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_PXA=y
-CONFIG_SPI=y
-CONFIG_SPI_PXA2XX=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_POWER_SUPPLY=y
-# CONFIG_HWMON is not set
-CONFIG_PMIC_DA903X=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_DEBUG=y
-CONFIG_REGULATOR_DA903X=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_DEV=y
-CONFIG_MEDIA_TUNER_CUSTOMISE=y
-# CONFIG_MEDIA_TUNER_SIMPLE is not set
-# CONFIG_MEDIA_TUNER_TDA8290 is not set
-# CONFIG_MEDIA_TUNER_TDA827X is not set
-# CONFIG_MEDIA_TUNER_TDA18271 is not set
-# CONFIG_MEDIA_TUNER_TDA9887 is not set
-# CONFIG_MEDIA_TUNER_TEA5761 is not set
-# CONFIG_MEDIA_TUNER_TEA5767 is not set
-# CONFIG_MEDIA_TUNER_MT20XX is not set
-# CONFIG_MEDIA_TUNER_MT2060 is not set
-# CONFIG_MEDIA_TUNER_MT2266 is not set
-# CONFIG_MEDIA_TUNER_MT2131 is not set
-# CONFIG_MEDIA_TUNER_QT1010 is not set
-# CONFIG_MEDIA_TUNER_XC2028 is not set
-# CONFIG_MEDIA_TUNER_XC5000 is not set
-# CONFIG_MEDIA_TUNER_MXL5005S is not set
-# CONFIG_MEDIA_TUNER_MXL5007T is not set
-# CONFIG_MEDIA_TUNER_MC44S803 is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-CONFIG_VIDEO_PXA27x=y
-# CONFIG_V4L_USB_DRIVERS is not set
-# CONFIG_RADIO_ADAPTERS is not set
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-CONFIG_FB_PXA_OVERLAY=y
-CONFIG_FB_PXA_PARAMETERS=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_MINI_4x6=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_PXA2XX_SOC=y
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_PXA27X=y
-CONFIG_USB_ETH=m
-# CONFIG_USB_ETH_RNDIS is not set
-CONFIG_MMC=y
-CONFIG_SDIO_UART=m
-CONFIG_MMC_PXA=y
-CONFIG_MMC_SPI=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_LP3944=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PXA=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=m
-CONFIG_AUTOFS4_FS=y
-CONFIG_FUSE_FS=m
-CONFIG_CUSE=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_WBUF_VERIFY=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-CONFIG_ROMFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
-CONFIG_SMB_FS=m
-CONFIG_CIFS=m
-CONFIG_CIFS_STATS=y
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_PROVE_LOCKING=y
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_VMAC=m
-CONFIG_CRYPTO_GHASH=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC16=y
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index 1d9fa77bbafc..711a79e9be00 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -1,15 +1,12 @@
-# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
 CONFIG_PROFILING=y
 CONFIG_ARCH_MULTI_V4T=y
 CONFIG_ARCH_MULTI_V5=y
@@ -24,13 +21,13 @@ CONFIG_SOC_IMX1=y
 CONFIG_SOC_IMX25=y
 CONFIG_SOC_IMX27=y
 CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_PM_DEBUG=y
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_SWAP is not set
+CONFIG_SLAB=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -63,6 +60,7 @@ CONFIG_MTD_UBI=y
 CONFIG_EEPROM_AT24=y
 CONFIG_EEPROM_AT25=y
 CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
 CONFIG_ATA=y
 CONFIG_PATA_IMX=y
 CONFIG_NETDEVICES=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index f7498df08dfe..078d61b758a9 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -1,6 +1,6 @@
 CONFIG_KERNEL_LZO=y
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BPF_SYSCALL=y
 CONFIG_PREEMPT_VOLUNTARY=y
@@ -13,8 +13,6 @@ CONFIG_RELAY=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_COMPAT_BRK is not set
 CONFIG_ARCH_MULTI_V6=y
 CONFIG_ARCH_MXC=y
 CONFIG_SOC_IMX31=y
@@ -33,7 +31,7 @@ CONFIG_SOC_VF610=y
 CONFIG_SMP=y
 CONFIG_ARM_PSCI=y
 CONFIG_HIGHMEM=y
-CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_ARCH_FORCE_MAX_ORDER=14
 CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
 CONFIG_KEXEC=y
 CONFIG_CPU_FREQ=y
@@ -58,6 +56,7 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_BINFMT_MISC=m
+# CONFIG_COMPAT_BRK is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -66,7 +65,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_NETFILTER=y
 CONFIG_CAN=y
-CONFIG_CAN_FLEXCAN=y
 CONFIG_BT=y
 CONFIG_BT_BNEP=m
 CONFIG_BT_HCIUART=y
@@ -137,6 +135,7 @@ CONFIG_SMSC911X=y
 # CONFIG_NET_VENDOR_STMICRO is not set
 CONFIG_MICREL_PHY=y
 CONFIG_AT803X_PHY=y
+CONFIG_CAN_FLEXCAN=y
 CONFIG_USB_PEGASUS=m
 CONFIG_USB_RTL8150=m
 CONFIG_USB_RTL8152=y
@@ -258,14 +257,14 @@ CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_USB_SUPPORT=y
 CONFIG_USB_VIDEO_CLASS=m
 CONFIG_V4L_PLATFORM_DRIVERS=y
-CONFIG_VIDEO_MUX=y
 CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_MUX=y
 CONFIG_VIDEO_CODA=m
 CONFIG_VIDEO_IMX_PXP=y
-CONFIG_VIDEO_ADV7180=m
 CONFIG_VIDEO_OV2680=m
 CONFIG_VIDEO_OV5640=m
 CONFIG_VIDEO_OV5645=m
+CONFIG_VIDEO_ADV7180=m
 CONFIG_IMX_IPUV3_CORE=y
 CONFIG_DRM=y
 CONFIG_DRM_MSM=y
@@ -402,6 +401,7 @@ CONFIG_IIO=y
 CONFIG_MMA8452=y
 CONFIG_IMX7D_ADC=y
 CONFIG_RN5T618_ADC=y
+CONFIG_STMPE_ADC=y
 CONFIG_VF610_ADC=y
 CONFIG_SENSORS_ISL29018=y
 CONFIG_MAG3110=y
@@ -467,6 +467,7 @@ CONFIG_PRINTK_TIME=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
+# CONFIG_SLUB_DEBUG is not set
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_PROVE_LOCKING=y
 # CONFIG_FTRACE is not set
diff --git a/arch/arm/configs/imxrt_defconfig b/arch/arm/configs/imxrt_defconfig
new file mode 100644
index 000000000000..52dba3762996
--- /dev/null
+++ b/arch/arm/configs/imxrt_defconfig
@@ -0,0 +1,35 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_BPF_SYSCALL=y
+CONFIG_SCHED_AUTOGROUP=y
+# CONFIG_MMU is not set
+CONFIG_ARCH_MXC=y
+CONFIG_SOC_IMXRT=y
+CONFIG_SET_MEM_PARAM=y
+CONFIG_DRAM_BASE=0x80000000
+CONFIG_DRAM_SIZE=0x02000000
+CONFIG_BINFMT_FLAT=y
+CONFIG_UEVENT_HELPER=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_IMX_WEIM=y
+CONFIG_LEGACY_PTY_COUNT=2
+CONFIG_SERIAL_FSL_LPUART=y
+CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
+CONFIG_SERIAL_DEV_BUS=y
+CONFIG_PINCTRL_IMXRT1050=y
+CONFIG_GPIO_MXC=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_ESDHC_IMX=y
+CONFIG_DMADEVICES=y
+CONFIG_FSL_EDMA=y
+CONFIG_CLK_IMXRT1050=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_UTF8=y
+CONFIG_EXFAT_FS=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_UTF8=y
diff --git a/arch/arm/configs/integrator_defconfig b/arch/arm/configs/integrator_defconfig
index 4dfe321a79f6..61711d4bbf74 100644
--- a/arch/arm/configs/integrator_defconfig
+++ b/arch/arm/configs/integrator_defconfig
@@ -1,5 +1,5 @@
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_IKCONFIG=y
@@ -79,8 +79,7 @@ CONFIG_CRAMFS=y
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig
index 18a21faa834c..19e30e790d35 100644
--- a/arch/arm/configs/iop32x_defconfig
+++ b/arch/arm/configs/iop32x_defconfig
@@ -3,21 +3,19 @@ CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_IOP32X=y
 CONFIG_MACH_GLANTANK=y
 CONFIG_ARCH_IQ80321=y
 CONFIG_ARCH_IQ31244=y
 CONFIG_MACH_N2100=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp cachepolicy=writealloc"
 CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_SLAB=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -44,6 +42,7 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_SG=y
+# CONFIG_BLK_DEV_BSG is not set
 CONFIG_ATA=y
 CONFIG_SATA_SIL=y
 CONFIG_SATA_VITESSE=y
@@ -94,13 +93,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_UART_8250=y
 CONFIG_KEYS=y
 CONFIG_CRYPTO_NULL=y
 CONFIG_CRYPTO_LRW=y
@@ -127,3 +119,8 @@ CONFIG_CRYPTO_TEA=y
 CONFIG_CRYPTO_TWOFISH=y
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_LIBCRC32C=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_LL_UART_8250=y
diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig
index 9a7667383df9..3cb995b9616a 100644
--- a/arch/arm/configs/ixp4xx_defconfig
+++ b/arch/arm/configs/ixp4xx_defconfig
@@ -1,36 +1,21 @@
+CONFIG_KERNEL_XZ=y
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_COMPRESSION_XZ=y
 CONFIG_EXPERT=y
-CONFIG_MODULES=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_IXP4XX=y
-CONFIG_MACH_NSLU2=y
-CONFIG_MACH_AVILA=y
-CONFIG_MACH_LOFT=y
-CONFIG_ARCH_ADI_COYOTE=y
-CONFIG_MACH_GATEWAY7001=y
-CONFIG_MACH_WG302V2=y
-CONFIG_ARCH_IXDP425=y
-CONFIG_MACH_IXDPG425=y
-CONFIG_MACH_IXDP465=y
-CONFIG_MACH_KIXRP435=y
-CONFIG_ARCH_PRPMC1100=y
-CONFIG_MACH_NAS100D=y
-CONFIG_MACH_DSMG600=y
-CONFIG_MACH_FSG=y
-CONFIG_MACH_GTWX5715=y
-CONFIG_IXP4XX_QMGR=y
-CONFIG_IXP4XX_NPE=y
-# CONFIG_ARM_THUMB is not set
 CONFIG_CPU_BIG_ENDIAN=y
 CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 ip=bootp root=/dev/nfs"
-CONFIG_FPE_NWFPE=y
+CONFIG_CMDLINE="console=ttyS0,115200"
+CONFIG_STRICT_KERNEL_RWX=y
+CONFIG_STRICT_MODULE_RWX=y
+CONFIG_MODULES=y
+CONFIG_MODVERSIONS=y
+CONFIG_PARTITION_ADVANCED=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -43,8 +28,6 @@ CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-CONFIG_NET_IPGRE=m
-CONFIG_NET_IPGRE_BROADCAST=y
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
@@ -65,7 +48,6 @@ CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
@@ -76,14 +58,12 @@ CONFIG_ATM_MPOA=m
 CONFIG_ATM_BR2684=m
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
-CONFIG_IPX=m
 CONFIG_ATALK=m
 CONFIG_DEV_APPLETALK=m
 CONFIG_IPDDP=m
 CONFIG_IPDDP_ENCAP=y
 CONFIG_X25=m
 CONFIG_LAPB=m
-CONFIG_WAN_ROUTER=m
 CONFIG_NET_SCHED=y
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
@@ -104,91 +84,92 @@ CONFIG_NET_CLS_RSVP6=m
 CONFIG_NET_CLS_ACT=y
 CONFIG_NET_ACT_POLICE=y
 CONFIG_NET_PKTGEN=m
+CONFIG_DEVTMPFS=y
 CONFIG_MTD=y
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_IXP4XX=y
+CONFIG_MTD_PHYSMAP_IXP4XX=y
 CONFIG_MTD_RAW_NAND=m
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_EEPROM_LEGACY=y
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_ATA=y
-CONFIG_SATA_VIA=y
-CONFIG_PATA_ARTOP=y
-CONFIG_PATA_CMD64X=y
-CONFIG_PATA_HPT366=y
-CONFIG_PATA_HPT37X=y
-CONFIG_PATA_HPT3X2N=y
-CONFIG_PATA_PDC2027X=y
 CONFIG_PATA_IXP4XX_CF=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
+CONFIG_ATM_TCP=m
 CONFIG_IXP4XX_ETH=y
-CONFIG_NET_PCI=y
 CONFIG_WAN=y
-CONFIG_HDLC=m
+CONFIG_HDLC=y
 CONFIG_HDLC_RAW=m
 CONFIG_HDLC_CISCO=m
 CONFIG_HDLC_FR=m
 CONFIG_HDLC_PPP=m
-CONFIG_HDLC_X25=m
-CONFIG_WAN_ROUTER_DRIVERS=m
-CONFIG_ATM_TCP=m
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_IXP4XX_HSS=m
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_MISC=y
-CONFIG_INPUT_IXP4XX_BEEPER=y
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_I2C=y
+CONFIG_HW_RANDOM=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_GPIO=y
+CONFIG_GPIO_GW_PLD=y
+CONFIG_GPIO_PCA953X=y
+CONFIG_SENSORS_AD7418=y
 CONFIG_SENSORS_W83781D=y
 CONFIG_WATCHDOG=y
 CONFIG_IXP4XX_WATCHDOG=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_UHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_FSG=y
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_DISK=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1672=y
 CONFIG_RTC_DRV_ISL1208=y
 CONFIG_RTC_DRV_X1205=y
 CONFIG_RTC_DRV_PCF8563=y
+CONFIG_IXP4XX_QMGR=y
+CONFIG_IXP4XX_NPE=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_OVERLAY_FS=y
 CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_JFFS2_FS=y
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_XZ=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
+CONFIG_CRYPTO_DEV_IXP4XX=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_LL=y
 CONFIG_DEBUG_LL_UART_8250=y
diff --git a/arch/arm/configs/jornada720_defconfig b/arch/arm/configs/jornada720_defconfig
index 069f60ffdcd8..ae1d68da4f2a 100644
--- a/arch/arm/configs/jornada720_defconfig
+++ b/arch/arm/configs/jornada720_defconfig
@@ -1,18 +1,15 @@
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_MULTI_V4=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_SA1100=y
 CONFIG_SA1100_JORNADA720=y
 CONFIG_SA1100_JORNADA720_SSP=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_SA1100=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=y
 CONFIG_PM=y
+CONFIG_MODULES=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -20,13 +17,12 @@ CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRCOMM=m
-CONFIG_SA1100_FIR=m
+CONFIG_PCCARD=y
+CONFIG_PCMCIA_SA1100=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
 CONFIG_ATA=y
 CONFIG_PATA_PCMCIA=y
 CONFIG_NETDEVICES=y
@@ -40,9 +36,9 @@ CONFIG_KEYBOARD_HP7XX=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_HP7XX=y
+CONFIG_LEGACY_PTY_COUNT=32
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=32
 # CONFIG_HWMON is not set
 CONFIG_FB=y
 CONFIG_FB_S1D13XXX=y
diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig
index 33c917df7b32..4a5b9adbf2a1 100644
--- a/arch/arm/configs/keystone_defconfig
+++ b/arch/arm/configs/keystone_defconfig
@@ -1,43 +1,41 @@
-# CONFIG_SWAP is not set
 CONFIG_POSIX_MQUEUE=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CGROUPS=y
+CONFIG_BLK_CGROUP=y
+CONFIG_CGROUP_SCHED=y
 CONFIG_CGROUP_FREEZER=y
 CONFIG_CGROUP_DEVICE=y
 CONFIG_CGROUP_CPUACCT=y
-CONFIG_CGROUP_SCHED=y
-CONFIG_BLK_CGROUP=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
 # CONFIG_ELF_CORE is not set
 # CONFIG_BASE_FULL is not set
+CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
 CONFIG_PROFILING=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
 CONFIG_ARCH_KEYSTONE=y
 CONFIG_ARM_LPAE=y
-CONFIG_PCI=y
-CONFIG_PCI_MSI=y
 CONFIG_PCI_KEYSTONE=y
 CONFIG_SMP=y
 CONFIG_HOTPLUG_CPU=y
 CONFIG_ARM_PSCI=y
-CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
-CONFIG_CMA=y
 CONFIG_VFP=y
 CONFIG_NEON=y
 # CONFIG_SUSPEND is not set
 CONFIG_PM=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_SWAP is not set
+CONFIG_CMA=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -111,11 +109,11 @@ CONFIG_IP6_NF_IPTABLES=m
 CONFIG_IP_SCTP=y
 CONFIG_VLAN_8021Q=y
 CONFIG_CAN=m
-CONFIG_CAN_C_CAN=m
-CONFIG_CAN_C_CAN_PLATFORM=m
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_DMA_CMA=y
+CONFIG_TI_SCI_PROTOCOL=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
@@ -131,10 +129,17 @@ CONFIG_EEPROM_AT24=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y
+CONFIG_TI_CPTS=y
 CONFIG_TI_KEYSTONE_NETCP=y
 CONFIG_TI_KEYSTONE_NETCP_ETHSS=y
-CONFIG_TI_CPTS=y
 CONFIG_MARVELL_PHY=y
+CONFIG_MICREL_PHY=y
+CONFIG_DP83867_PHY=y
+CONFIG_CAN_C_CAN=m
+CONFIG_CAN_C_CAN_PLATFORM=m
+CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_GPIO_DECODER=m
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_OF_PLATFORM=y
@@ -144,17 +149,18 @@ CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_DAVINCI=y
 CONFIG_SPI=y
+CONFIG_SPI_CADENCE_QUADSPI=y
 CONFIG_SPI_DAVINCI=y
 CONFIG_SPI_SPIDEV=y
-CONFIG_PTP_1588_CLOCK=y
 CONFIG_PINCTRL_SINGLE=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_DAVINCI=y
 CONFIG_GPIO_SYSCON=y
-CONFIG_POWER_SUPPLY=y
+CONFIG_GPIO_PCA953X=m
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_KEYSTONE=y
+CONFIG_POWER_SUPPLY=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_DAVINCI_WATCHDOG=y
@@ -166,8 +172,8 @@ CONFIG_USB_MON=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_DWC3=y
-CONFIG_NOP_USB_XCEIV=y
 CONFIG_KEYSTONE_USB_PHY=y
+CONFIG_NOP_USB_XCEIV=y
 CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
@@ -180,6 +186,8 @@ CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_ONESHOT=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_ACTIVITY=y
 CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_DMADEVICES=y
 CONFIG_TI_EDMA=y
@@ -196,7 +204,6 @@ CONFIG_PWM_TIECAP=m
 CONFIG_KEYSTONE_IRQ=y
 CONFIG_RESET_TI_SCI=m
 CONFIG_RESET_TI_SYSCON=m
-CONFIG_TI_SCI_PROTOCOL=y
 CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_FANOTIFY=y
@@ -213,14 +220,9 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_SHIRQ=y
-CONFIG_DEBUG_USER=y
 CONFIG_CRYPTO_USER=y
 CONFIG_CRYPTO_AUTHENC=y
 CONFIG_CRYPTO_CBC=y
@@ -230,12 +232,8 @@ CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_ANSI_CPRNG=y
 CONFIG_CRYPTO_USER_API_HASH=y
 CONFIG_CRYPTO_USER_API_SKCIPHER=y
-CONFIG_SPI_CADENCE_QUADSPI=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_EVDEV=m
-CONFIG_INPUT_GPIO_DECODER=m
-CONFIG_GPIO_PCA953X=m
-CONFIG_LEDS_TRIGGER_ACTIVITY=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_MICREL_PHY=y
-CONFIG_DP83867_PHY=y
+CONFIG_DMA_CMA=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/lart_defconfig b/arch/arm/configs/lart_defconfig
index b6ddb9884326..916177d07a39 100644
--- a/arch/arm/configs/lart_defconfig
+++ b/arch/arm/configs/lart_defconfig
@@ -1,32 +1,23 @@
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
+CONFIG_ARCH_MULTI_V4=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_SA1100=y
 CONFIG_SA1100_LART=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="console=ttySA0,9600 root=/dev/ram"
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=y
 CONFIG_PM=y
+CONFIG_MODULES=y
 CONFIG_NET=y
 CONFIG_PACKET=m
 CONFIG_UNIX=y
 CONFIG_INET=y
 CONFIG_SYN_COOKIES=y
 # CONFIG_IPV6 is not set
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_DEBUG=y
-CONFIG_SA1100_FIR=m
 CONFIG_MTD=y
 CONFIG_MTD_DEBUG=y
 CONFIG_MTD_DEBUG_VERBOSE=1
@@ -37,15 +28,19 @@ CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_NET_ETHERNET=y
 CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_ASYNC=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_SOUND=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_CPU=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=m
 CONFIG_REISERFS_FS=m
@@ -59,7 +54,6 @@ CONFIG_CRAMFS=m
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_NLS=y
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_850=m
diff --git a/arch/arm/configs/lpc18xx_defconfig b/arch/arm/configs/lpc18xx_defconfig
index be882ea0eee4..56eae6a0a311 100644
--- a/arch/arm/configs/lpc18xx_defconfig
+++ b/arch/arm/configs/lpc18xx_defconfig
@@ -15,8 +15,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
 CONFIG_EMBEDDED=y
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_SLUB_DEBUG is not set
 # CONFIG_MMU is not set
 CONFIG_ARCH_LPC18XX=y
 CONFIG_SET_MEM_PARAM=y
@@ -24,14 +22,11 @@ CONFIG_DRAM_BASE=0x28000000
 CONFIG_DRAM_SIZE=0x02000000
 CONFIG_FLASH_MEM_BASE=0x1b000000
 CONFIG_FLASH_SIZE=0x00080000
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
-# CONFIG_BLK_DEV_BSG is not set
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
-CONFIG_BINFMT_SHARED_FLAT=y
 # CONFIG_COREDUMP is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -61,6 +56,7 @@ CONFIG_SRAM=y
 CONFIG_EEPROM_AT24=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_ARC is not set
@@ -93,11 +89,11 @@ CONFIG_KEYBOARD_GPIO_POLLED=y
 # CONFIG_VT is not set
 # CONFIG_UNIX98_PTYS is not set
 # CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_NONSTANDARD=y
 CONFIG_SERIAL_8250=y
 # CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C_LPC2K=y
 CONFIG_SPI=y
@@ -154,11 +150,12 @@ CONFIG_JFFS2_FS=y
 CONFIG_CRC_ITU_T=y
 CONFIG_CRC7=y
 CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+# CONFIG_SLUB_DEBUG is not set
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_LL=y
 CONFIG_EARLY_PRINTK=y
diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig
index 6c3e4a141963..fabb66a53350 100644
--- a/arch/arm/configs/lpc32xx_defconfig
+++ b/arch/arm/configs/lpc32xx_defconfig
@@ -1,5 +1,5 @@
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_IKCONFIG=y
@@ -10,12 +10,9 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_LPC32XX=y
 CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CMDLINE="console=ttyS0,115200n81 root=/dev/ram0"
@@ -24,9 +21,9 @@ CONFIG_VFP=y
 CONFIG_JUMP_LABEL=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_SLAB=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -60,6 +57,7 @@ CONFIG_EEPROM_AT24=y
 CONFIG_EEPROM_AT25=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
 CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_BROADCOM is not set
 # CONFIG_NET_VENDOR_CIRRUS is not set
@@ -93,11 +91,11 @@ CONFIG_SERIAL_HS_LPC32XX_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_PNX=y
-CONFIG_GPIO_LPC32XX=y
 CONFIG_SPI=y
 CONFIG_SPI_PL022=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_GENERIC_PLATFORM=y
+CONFIG_GPIO_LPC32XX=y
 CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCF857X=y
 CONFIG_SENSORS_DS620=y
@@ -187,10 +185,10 @@ CONFIG_CRYPTO_ANSI_CPRNG=y
 CONFIG_CRC_CCITT=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DYNAMIC_DEBUG=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_GDB_SCRIPTS=y
-CONFIG_DEBUG_FS=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
 CONFIG_PANIC_ON_OOPS=y
 CONFIG_PANIC_TIMEOUT=5
 # CONFIG_SCHED_DEBUG is not set
diff --git a/arch/arm/configs/lpd270_defconfig b/arch/arm/configs/lpd270_defconfig
index 3a4d0e64cd6e..b0c21a99a0a8 100644
--- a/arch/arm/configs/lpd270_defconfig
+++ b/arch/arm/configs/lpd270_defconfig
@@ -1,14 +1,13 @@
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SLAB=y
-CONFIG_MODULES=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_PXA=y
 CONFIG_MACH_LOGICPD_PXA270=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M"
 CONFIG_FPE_NWFPE=y
+CONFIG_MODULES=y
+CONFIG_SLAB=y
 CONFIG_NET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
@@ -52,8 +51,8 @@ CONFIG_JFFS2_FS=y
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/lubbock_defconfig b/arch/arm/configs/lubbock_defconfig
index 4ce2da2e76fa..4fc744c96196 100644
--- a/arch/arm/configs/lubbock_defconfig
+++ b/arch/arm/configs/lubbock_defconfig
@@ -1,23 +1,20 @@
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_MODULES=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_PXA=y
 CONFIG_ARCH_LUBBOCK=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_PXA2XX=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M"
 CONFIG_FPE_NWFPE=y
+CONFIG_MODULES=y
 CONFIG_NET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IPV6 is not set
+CONFIG_PCCARD=y
+CONFIG_PCMCIA_PXA2XX=y
 CONFIG_MTD=y
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_BLOCK=y
@@ -28,9 +25,9 @@ CONFIG_MTD_CFI_GEOMETRY=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
 CONFIG_NET_PCMCIA=y
 CONFIG_PCMCIA_PCNET=y
+CONFIG_SMC91X=y
 CONFIG_INPUT_EVDEV=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_SA1111=y
@@ -39,14 +36,18 @@ CONFIG_SERIAL_PXA_CONSOLE=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_USB_GADGET=y
 CONFIG_USB_G_SERIAL=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_CPU=y
 CONFIG_EXT2_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_JFFS2_FS=y
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig
index abde1fb23b20..5a8776f6aba3 100644
--- a/arch/arm/configs/magician_defconfig
+++ b/arch/arm/configs/magician_defconfig
@@ -1,28 +1,28 @@
 CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_PREEMPT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 # CONFIG_UID16 is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_PXA=y
 CONFIG_MACH_H4700=y
 CONFIG_MACH_MAGICIAN=y
-CONFIG_NO_HZ=y
-CONFIG_PREEMPT=y
 CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="keepinitrd"
 CONFIG_KEXEC=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
 CONFIG_FPE_NWFPE=y
 CONFIG_PM=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_SLAB=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -34,15 +34,6 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRCOMM=m
-CONFIG_IRDA_ULTRA=y
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-CONFIG_IRDA_DEBUG=y
-CONFIG_IRTTY_SIR=m
-CONFIG_PXA_FICP=m
 CONFIG_BT=m
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
@@ -59,11 +50,11 @@ CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_NETDEVICES=y
 CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_MPPE=m
 # CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_PPP_ASYNC=m
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
 CONFIG_KEYBOARD_GPIO=y
@@ -72,19 +63,19 @@ CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_UINPUT=m
 # CONFIG_SERIO is not set
-CONFIG_SERIAL_PXA=y
 # CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_PXA=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=m
 CONFIG_I2C_PXA=y
 CONFIG_W1_MASTER_DS1WM=y
+CONFIG_HTC_EGPIO=y
 CONFIG_POWER_SUPPLY=y
 CONFIG_PDA_POWER=y
 CONFIG_BATTERY_DS2760=y
 # CONFIG_HWMON is not set
 CONFIG_MFD_ASIC3=y
-CONFIG_HTC_EGPIO=y
 CONFIG_HTC_PASIC3=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_GPIO=y
@@ -98,8 +89,6 @@ CONFIG_BACKLIGHT_PWM=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_MINI_4x6=y
 CONFIG_SOUND=y
 CONFIG_SND=m
 CONFIG_SND_MIXER_OSS=m
@@ -111,6 +100,7 @@ CONFIG_SND_PXA2XX_SOC=m
 CONFIG_USB=y
 CONFIG_USB_MON=m
 CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_GPIO_VBUS=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_VBUS_DRAW=500
 CONFIG_USB_PXA27X=y
@@ -120,7 +110,6 @@ CONFIG_USB_GADGETFS=m
 CONFIG_USB_MASS_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_USB_CDC_COMPOSITE=m
-CONFIG_USB_GPIO_VBUS=y
 CONFIG_MMC=y
 CONFIG_SDIO_UART=m
 CONFIG_MMC_PXA=y
@@ -147,6 +136,11 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_1251=m
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_CCITT=y
+CONFIG_FONTS=y
+CONFIG_FONT_MINI_4x6=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
@@ -154,7 +148,4 @@ CONFIG_TIMER_STATS=y
 # CONFIG_DEBUG_PREEMPT is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/mainstone_defconfig b/arch/arm/configs/mainstone_defconfig
index 26499b697f9f..096cd7bc667a 100644
--- a/arch/arm/configs/mainstone_defconfig
+++ b/arch/arm/configs/mainstone_defconfig
@@ -1,15 +1,12 @@
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_MODULES=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_PXA=y
 CONFIG_MACH_MAINSTONE=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M"
 CONFIG_FPE_NWFPE=y
+CONFIG_MODULES=y
 CONFIG_NET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
@@ -37,14 +34,18 @@ CONFIG_FB_PXA=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_CPU=y
 CONFIG_EXT2_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_JFFS2_FS=y
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/milbeaut_m10v_defconfig b/arch/arm/configs/milbeaut_m10v_defconfig
index 7c07f9893a0f..a2e25bf843cc 100644
--- a/arch/arm/configs/milbeaut_m10v_defconfig
+++ b/arch/arm/configs/milbeaut_m10v_defconfig
@@ -1,5 +1,5 @@
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
@@ -26,7 +26,7 @@ CONFIG_THUMB2_KERNEL=y
 # CONFIG_THUMB2_AVOID_R_ARM_THM_JUMP11 is not set
 # CONFIG_ARM_PATCH_IDIV is not set
 CONFIG_HIGHMEM=y
-CONFIG_FORCE_MAX_ZONEORDER=12
+CONFIG_ARCH_FORCE_MAX_ORDER=12
 CONFIG_SECCOMP=y
 CONFIG_KEXEC=y
 CONFIG_EFI=y
@@ -44,9 +44,6 @@ CONFIG_ARM_CPUIDLE=y
 CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_KERNEL_MODE_NEON=y
-CONFIG_EFI_VARS=m
-CONFIG_EFI_CAPSULE_LOADER=m
-CONFIG_ARM_CRYPTO=y
 CONFIG_CRYPTO_SHA1_ARM_NEON=m
 CONFIG_CRYPTO_SHA1_ARM_CE=m
 CONFIG_CRYPTO_SHA2_ARM_CE=m
@@ -64,8 +61,7 @@ CONFIG_CMDLINE_PARTITION=y
 CONFIG_CMA=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_DMA_CMA=y
-CONFIG_CMA_SIZE_MBYTES=64
+CONFIG_EFI_CAPSULE_LOADER=m
 CONFIG_OF_OVERLAY=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
@@ -115,5 +111,7 @@ CONFIG_CRYPTO_AES=y
 # CONFIG_CRYPTO_HW is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC_ITU_T=m
+CONFIG_DMA_CMA=y
+CONFIG_CMA_SIZE_MBYTES=64
 CONFIG_PRINTK_TIME=y
 CONFIG_MAGIC_SYSRQ=y
diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig
index 898490aaa39e..86e00f684e16 100644
--- a/arch/arm/configs/mini2440_defconfig
+++ b/arch/arm/configs/mini2440_defconfig
@@ -3,14 +3,15 @@ CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_RELAY=y
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_ARCH_MULTI_V4T=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_S3C24XX=y
 CONFIG_S3C_ADC=y
-CONFIG_S3C24XX_PWM=y
 # CONFIG_CPU_S3C2410 is not set
 CONFIG_CPU_S3C2440=y
 CONFIG_MACH_MINI2440=y
 CONFIG_AEABI=y
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_KEXEC=y
 CONFIG_CPU_IDLE=y
 CONFIG_APM_EMULATION=y
@@ -18,7 +19,6 @@ CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
 CONFIG_BLK_DEV_INTEGRITY=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_BSD_DISKLABEL=y
@@ -27,6 +27,7 @@ CONFIG_SOLARIS_X86_PARTITION=y
 CONFIG_UNIXWARE_DISKLABEL=y
 CONFIG_LDM_PARTITION=y
 CONFIG_BINFMT_MISC=m
+# CONFIG_COMPAT_BRK is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -103,6 +104,7 @@ CONFIG_SCSI=m
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=m
 CONFIG_CHR_DEV_SG=m
+# CONFIG_BLK_DEV_BSG is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
 CONFIG_TUN=m
@@ -228,6 +230,8 @@ CONFIG_RTC_INTF_DEV_UIE_EMUL=y
 CONFIG_RTC_DRV_S3C=y
 CONFIG_DMADEVICES=y
 CONFIG_S3C24XX_DMAC=y
+CONFIG_PWM=y
+CONFIG_PWM_SAMSUNG=y
 CONFIG_EXT2_FS=m
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
@@ -325,10 +329,10 @@ CONFIG_LIBCRC32C=m
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_MINI_4x6=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 # CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/mmp2_defconfig b/arch/arm/configs/mmp2_defconfig
index a5e8d2235a1a..7984640e994e 100644
--- a/arch/arm/configs/mmp2_defconfig
+++ b/arch/arm/configs/mmp2_defconfig
@@ -1,22 +1,18 @@
 CONFIG_SYSVIPC=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_MMP=y
-CONFIG_MACH_BROWNSTONE=y
-CONFIG_MACH_FLINT=y
-CONFIG_MACH_MARVELL_JASPER=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
 CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_MACH_MMP2_DT=y
 CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS2,38400 mem=128M user_debug=255 earlyprintk"
 CONFIG_VFP=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_SLAB=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -28,9 +24,9 @@ CONFIG_IP_PNP=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
-CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_GENERIC=y
+CONFIG_MTD_RAW_NAND=y
 # CONFIG_BLK_DEV is not set
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
@@ -39,9 +35,9 @@ CONFIG_SMC91X=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_PXA=y
@@ -55,17 +51,18 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_MAX8925=y
 # CONFIG_VGA_CONSOLE is not set
 # CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_MAX8925=y
-CONFIG_MMC=y
-# CONFIG_DNOTIFY is not set
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_RESET_CONTROLLER is not set
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 CONFIG_EXT4_FS=y
+# CONFIG_DNOTIFY is not set
 CONFIG_MSDOS_FS=y
 CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_JFFS2_FS=y
 CONFIG_CRAMFS=y
 CONFIG_NFS_FS=y
@@ -73,16 +70,16 @@ CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
+CONFIG_CRC_CCITT=y
 CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_INFO=y
 # CONFIG_DYNAMIC_DEBUG is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
 CONFIG_DEBUG_MMP_UART3=y
 CONFIG_EARLY_PRINTK=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/moxart_defconfig b/arch/arm/configs/moxart_defconfig
index eacc089d86c5..ea31f116d577 100644
--- a/arch/arm/configs/moxart_defconfig
+++ b/arch/arm/configs/moxart_defconfig
@@ -1,7 +1,7 @@
 # CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_PREEMPT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_ELF_CORE is not set
@@ -11,18 +11,17 @@ CONFIG_IKCONFIG_PROC=y
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
 CONFIG_EMBEDDED=y
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_COMPAT_BRK is not set
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_MULTI_V4=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_MOXART=y
 CONFIG_MACH_UC7112LX=y
-CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 # CONFIG_ATAGS is not set
 CONFIG_ARM_APPENDED_DTB=y
+# CONFIG_SWAP is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -118,10 +117,15 @@ CONFIG_EXT3_FS=y
 CONFIG_TMPFS=y
 CONFIG_CONFIGFS_FS=y
 CONFIG_JFFS2_FS=y
+CONFIG_KEYS=y
+CONFIG_CRC32_BIT=y
+CONFIG_DMA_API_DEBUG=y
 CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 # CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_KGDB=y
 CONFIG_DEBUG_PAGEALLOC=y
+# CONFIG_SLUB_DEBUG is not set
 CONFIG_DEBUG_OBJECTS=y
 CONFIG_DEBUG_KMEMLEAK=y
 CONFIG_DEBUG_STACK_USAGE=y
@@ -131,12 +135,8 @@ CONFIG_DETECT_HUNG_TASK=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set
 CONFIG_PROVE_LOCKING=y
-CONFIG_DMA_API_DEBUG=y
-CONFIG_KGDB=y
 CONFIG_DEBUG_LL=y
 CONFIG_DEBUG_LL_UART_8250=y
 CONFIG_DEBUG_UART_PHYS=0x98200000
 CONFIG_DEBUG_UART_VIRT=0xf9820000
 CONFIG_EARLY_PRINTK=y
-CONFIG_KEYS=y
-CONFIG_CRC32_BIT=y
diff --git a/arch/arm/configs/mps2_defconfig b/arch/arm/configs/mps2_defconfig
index 89f4a6ff30bd..3ed73f184d83 100644
--- a/arch/arm/configs/mps2_defconfig
+++ b/arch/arm/configs/mps2_defconfig
@@ -1,5 +1,6 @@
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_EXPERT=y
@@ -10,22 +11,17 @@ CONFIG_EXPERT=y
 # CONFIG_SIGNALFD is not set
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_BLOCK is not set
 # CONFIG_MMU is not set
 CONFIG_ARCH_MPS2=y
 CONFIG_SET_MEM_PARAM=y
 CONFIG_DRAM_BASE=0x21000000
 CONFIG_DRAM_SIZE=0x1000000
-CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_ATAGS is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+# CONFIG_SUSPEND is not set
+# CONFIG_BLOCK is not set
 CONFIG_BINFMT_FLAT=y
-CONFIG_BINFMT_SHARED_FLAT=y
 # CONFIG_COREDUMP is not set
-# CONFIG_SUSPEND is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -68,9 +64,9 @@ CONFIG_SMSC911X=y
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
 # CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_NONSTANDARD=y
 CONFIG_SERIAL_MPS2_UART_CONSOLE=y
 CONFIG_SERIAL_MPS2_UART=y
+CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
@@ -98,9 +94,10 @@ CONFIG_NFS_V4_2=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS=y
 CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
 # CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_DEBUG_FS=y
+# CONFIG_SLUB_DEBUG is not set
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_MEMTEST=y
diff --git a/arch/arm/configs/multi_v4t_defconfig b/arch/arm/configs/multi_v4t_defconfig
index e530107be412..e2fd822f741a 100644
--- a/arch/arm/configs/multi_v4t_defconfig
+++ b/arch/arm/configs/multi_v4t_defconfig
@@ -3,7 +3,6 @@ CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
-CONFIG_SLOB=y
 CONFIG_ARCH_MULTI_V4T=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_AT91=y
@@ -11,23 +10,22 @@ CONFIG_SOC_AT91RM9200=y
 CONFIG_ARCH_CLPS711X=y
 CONFIG_ARCH_MXC=y
 CONFIG_SOC_IMX1=y
+CONFIG_ARCH_NSPIRE=y
 CONFIG_ARCH_INTEGRATOR=y
 CONFIG_ARCH_INTEGRATOR_AP=y
 CONFIG_INTEGRATOR_IMPD1=y
 CONFIG_INTEGRATOR_CM720T=y
 CONFIG_INTEGRATOR_CM920T=y
 CONFIG_INTEGRATOR_CM922T_XA10=y
-CONFIG_ARCH_NSPIRE=y
 CONFIG_AEABI=y
 # CONFIG_ATAGS is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CPU_IDLE=y
 CONFIG_ARM_CPUIDLE=y
 CONFIG_ARM_CLPS711X_CPUIDLE=y
 CONFIG_JUMP_LABEL=y
 CONFIG_PARTITION_ADVANCED=y
 # CONFIG_COREDUMP is not set
+CONFIG_SLOB=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
@@ -73,8 +71,6 @@ CONFIG_POWER_RESET_SYSCON_POWEROFF=y
 CONFIG_WATCHDOG=y
 CONFIG_GPIO_WATCHDOG=y
 CONFIG_AT91RM9200_WATCHDOG=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_GPIO=y
 CONFIG_FB=y
 CONFIG_FB_CLPS711X=y
diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig
index fe8d760256a4..60fc52b95690 100644
--- a/arch/arm/configs/multi_v5_defconfig
+++ b/arch/arm/configs/multi_v5_defconfig
@@ -1,5 +1,5 @@
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_LOG_BUF_SHIFT=19
@@ -12,23 +12,9 @@ CONFIG_MACH_ASPEED_G4=y
 CONFIG_ARCH_AT91=y
 CONFIG_SOC_AT91SAM9=y
 CONFIG_ARCH_DAVINCI=y
-CONFIG_ARCH_DAVINCI_DM644x=y
-CONFIG_ARCH_DAVINCI_DM355=y
-CONFIG_ARCH_DAVINCI_DM646x=y
 CONFIG_ARCH_DAVINCI_DA830=y
 CONFIG_ARCH_DAVINCI_DA850=y
-CONFIG_ARCH_DAVINCI_DM365=y
-CONFIG_MACH_SFFSDR=y
-CONFIG_MACH_NEUROS_OSD2=y
-CONFIG_MACH_DM355_LEOPARD=y
-CONFIG_MACH_MITYOMAPL138=y
-CONFIG_MACH_OMAPL138_HAWKBOARD=y
 CONFIG_ARCH_MXC=y
-CONFIG_MACH_MX21ADS=y
-CONFIG_MACH_MX27ADS=y
-CONFIG_MACH_MX27_3DS=y
-CONFIG_MACH_IMX27_VISSTRIM_M10=y
-CONFIG_MACH_PCA100=y
 CONFIG_SOC_IMX25=y
 CONFIG_SOC_IMX27=y
 CONFIG_ARCH_MVEBU=y
@@ -36,8 +22,6 @@ CONFIG_MACH_KIRKWOOD=y
 CONFIG_ARCH_NPCM=y
 CONFIG_ARCH_WPCM450=y
 CONFIG_ARCH_ORION5X=y
-CONFIG_MACH_DB88F5281=y
-CONFIG_MACH_RD88F5182=y
 CONFIG_MACH_RD88F5182_DT=y
 CONFIG_MACH_KUROBOX_PRO=y
 CONFIG_MACH_DNS323=y
@@ -45,23 +29,16 @@ CONFIG_MACH_TS209=y
 CONFIG_MACH_TERASTATION_PRO2=y
 CONFIG_MACH_LINKSTATION_PRO=y
 CONFIG_MACH_LINKSTATION_MINI=y
-CONFIG_MACH_LINKSTATION_LS_HGL=y
 CONFIG_MACH_TS409=y
-CONFIG_MACH_WRT350N_V2=y
 CONFIG_MACH_TS78XX=y
 CONFIG_MACH_MV2120=y
 CONFIG_MACH_D2NET_DT=y
 CONFIG_MACH_NET2BIG=y
 CONFIG_MACH_MSS2_DT=y
-CONFIG_MACH_WNR854T=y
-CONFIG_MACH_RD88F5181L_GE=y
-CONFIG_MACH_RD88F5181L_FXO=y
-CONFIG_MACH_RD88F6183AP_GE=y
-CONFIG_ARCH_U300=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_ARCH_VERSATILE=y
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CPU_FREQ=y
@@ -85,6 +62,7 @@ CONFIG_NET_PKTGEN=m
 CONFIG_CFG80211=y
 CONFIG_MAC80211=y
 CONFIG_PCI_MVEBU=y
+CONFIG_PCI_VERSATILE=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_IMX_WEIM=y
@@ -103,9 +81,9 @@ CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_ATMEL=y
 CONFIG_MTD_NAND_ORION=y
 CONFIG_MTD_SPI_NOR=y
-CONFIG_SPI_ASPEED_SMC=y
 CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
+CONFIG_VIRTIO_BLK=y
 CONFIG_ATMEL_SSC=m
 CONFIG_EEPROM_AT24=y
 # CONFIG_SCSI_PROC_FS is not set
@@ -143,7 +121,10 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=6
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_ASPEED_VUART=m
+CONFIG_SERIAL_8250_DW=y
 CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
 CONFIG_SERIAL_ATMEL_TTYAT=y
@@ -159,15 +140,15 @@ CONFIG_I2C_ASPEED=m
 CONFIG_I2C_AT91=y
 CONFIG_I2C_IMX=y
 CONFIG_I2C_MV64XXX=y
-CONFIG_I2C_NOMADIK=y
 CONFIG_SPI=y
+CONFIG_SPI_ASPEED_SMC=y
 CONFIG_SPI_ATMEL=y
 CONFIG_SPI_IMX=y
 CONFIG_SPI_ORION=y
+CONFIG_SPI_SUN6I=y
 CONFIG_GPIO_ASPEED=m
 CONFIG_GPIO_ASPEED_SGPIO=y
 CONFIG_GPIO_MXC=y
-CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_GPIO=y
 CONFIG_POWER_RESET_QNAP=y
 CONFIG_SENSORS_ADT7475=y
@@ -180,14 +161,15 @@ CONFIG_THERMAL=y
 CONFIG_KIRKWOOD_THERMAL=y
 CONFIG_AT91SAM9X_WATCHDOG=y
 CONFIG_ORION_WATCHDOG=y
+CONFIG_SUNXI_WATCHDOG=y
 CONFIG_NPCM7XX_WATCHDOG=y
 CONFIG_IMX2_WDT=y
 CONFIG_MFD_ATMEL_HLCDC=y
-# CONFIG_ABX500_CORE is not set
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_PLATFORM_SUPPORT=y
 CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_VIDEO_ASPEED=m
 CONFIG_VIDEO_ATMEL_ISI=m
@@ -196,6 +178,7 @@ CONFIG_DRM_ATMEL_HLCDC=m
 CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_DRM_PANEL_EDP=y
 CONFIG_DRM_ASPEED_GFX=m
+CONFIG_FB=y
 CONFIG_FB_IMX=y
 CONFIG_FB_ATMEL=y
 CONFIG_BACKLIGHT_ATMEL_LCDC=y
@@ -208,7 +191,8 @@ CONFIG_SND_ATMEL_SOC_WM8904=m
 CONFIG_SND_AT91_SOC_SAM9X5_WM8731=m
 CONFIG_SND_KIRKWOOD_SOC=y
 CONFIG_SND_SOC_ALC5623=y
-CONFIG_SND_SOC_WM8731=y
+CONFIG_SND_SOC_WM8731_I2C=y
+CONFIG_SND_SOC_WM8731_SPI=y
 CONFIG_SND_SIMPLE_CARD=y
 CONFIG_HID_DRAGONRISE=y
 CONFIG_HID_GYRATION=y
@@ -249,6 +233,7 @@ CONFIG_MMC_SDHCI_PLTFM=m
 CONFIG_MMC_SDHCI_OF_ASPEED=m
 CONFIG_MMC_ATMELMCI=y
 CONFIG_MMC_MVSDIO=y
+CONFIG_MMC_SUNXI=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
@@ -268,6 +253,8 @@ CONFIG_RTC_DRV_ASPEED=m
 CONFIG_DMADEVICES=y
 CONFIG_AT_HDMAC=y
 CONFIG_MV_XOR=y
+CONFIG_VIRTIO_PCI=y
+CONFIG_VIRTIO_MMIO=y
 CONFIG_STAGING=y
 CONFIG_ASPEED_LPC_CTRL=m
 CONFIG_ASPEED_LPC_SNOOP=m
@@ -302,10 +289,10 @@ CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_DEV_MARVELL_CESA=y
 CONFIG_CRC_CCITT=y
 CONFIG_LIBCRC32C=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_FS=y
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_FTRACE is not set
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 8863fa969ede..b61b2e3d116b 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -1,11 +1,12 @@
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
 CONFIG_ARCH_VIRT=y
+CONFIG_ARCH_AIROHA=y
 CONFIG_ARCH_ACTIONS=y
 CONFIG_ARCH_ALPINE=y
 CONFIG_ARCH_ARTPEC=y
@@ -17,6 +18,7 @@ CONFIG_SOC_SAMA5D2=y
 CONFIG_SOC_SAMA5D3=y
 CONFIG_SOC_SAMA5D4=y
 CONFIG_SOC_SAMA7G5=y
+CONFIG_SOC_LAN966=y
 CONFIG_ARCH_BCM=y
 CONFIG_ARCH_BCM_CYGNUS=y
 CONFIG_ARCH_BCM_HR2=y
@@ -24,9 +26,14 @@ CONFIG_ARCH_BCM_NSP=y
 CONFIG_ARCH_BCM_5301X=y
 CONFIG_ARCH_BCM_281XX=y
 CONFIG_ARCH_BCM_21664=y
+CONFIG_ARCH_BCM_23550=y
 CONFIG_ARCH_BCM2835=y
-CONFIG_ARCH_BCM_63XX=y
+CONFIG_ARCH_BCM_53573=y
 CONFIG_ARCH_BRCMSTB=y
+CONFIG_ARCH_BCMBCA=y
+CONFIG_ARCH_BCMBCA_CORTEXA7=y
+CONFIG_ARCH_BCMBCA_CORTEXA9=y
+CONFIG_ARCH_BCMBCA_BRAHMAB15=y
 CONFIG_ARCH_BERLIN=y
 CONFIG_MACH_BERLIN_BG2=y
 CONFIG_MACH_BERLIN_BG2CD=y
@@ -39,6 +46,8 @@ CONFIG_ARCH_HI3xxx=y
 CONFIG_ARCH_HIP01=y
 CONFIG_ARCH_HIP04=y
 CONFIG_ARCH_HIX5HD2=y
+CONFIG_ARCH_HPE=y
+CONFIG_ARCH_HPE_GXP=y
 CONFIG_ARCH_MXC=y
 CONFIG_SOC_IMX50=y
 CONFIG_SOC_IMX51=y
@@ -75,6 +84,7 @@ CONFIG_SOC_AM43XX=y
 CONFIG_SOC_DRA7XX=y
 CONFIG_ARCH_QCOM=y
 CONFIG_ARCH_MSM8X60=y
+CONFIG_ARCH_MSM8916=y
 CONFIG_ARCH_MSM8960=y
 CONFIG_ARCH_MSM8974=y
 CONFIG_ARCH_ROCKCHIP=y
@@ -86,6 +96,7 @@ CONFIG_MACH_SPEAR1310=y
 CONFIG_MACH_SPEAR1340=y
 CONFIG_ARCH_STI=y
 CONFIG_ARCH_STM32=y
+CONFIG_ARCH_SUNPLUS=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_ARCH_TEGRA=y
 CONFIG_ARCH_UNIPHIER=y
@@ -109,23 +120,18 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
 CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
 CONFIG_CPUFREQ_DT=y
 CONFIG_ARM_IMX6Q_CPUFREQ=y
+CONFIG_ARM_QCOM_CPUFREQ_NVMEM=y
 CONFIG_ARM_RASPBERRYPI_CPUFREQ=y
 CONFIG_ARM_SCMI_CPUFREQ=y
 CONFIG_QORIQ_CPUFREQ=y
 CONFIG_CPU_IDLE=y
 CONFIG_ARM_CPUIDLE=y
+CONFIG_ARM_PSCI_CPUIDLE=y
 CONFIG_ARM_ZYNQ_CPUIDLE=y
 CONFIG_ARM_EXYNOS_CPUIDLE=y
 CONFIG_ARM_TEGRA_CPUIDLE=y
 CONFIG_ARM_QCOM_SPM_CPUIDLE=y
 CONFIG_KERNEL_MODE_NEON=y
-CONFIG_ARM_SCMI_PROTOCOL=y
-CONFIG_RASPBERRYPI_FIRMWARE=y
-CONFIG_TRUSTED_FOUNDATIONS=y
-CONFIG_BCM47XX_NVRAM=y
-CONFIG_BCM47XX_SPROM=y
-CONFIG_EFI_CAPSULE_LOADER=m
-CONFIG_ARM_CRYPTO=y
 CONFIG_CRYPTO_SHA1_ARM_NEON=m
 CONFIG_CRYPTO_SHA1_ARM_CE=m
 CONFIG_CRYPTO_SHA2_ARM_CE=m
@@ -157,18 +163,15 @@ CONFIG_IPV6_MIP6=m
 CONFIG_IPV6_TUNNEL=m
 CONFIG_IPV6_MULTIPLE_TABLES=y
 CONFIG_NET_DSA=m
+CONFIG_QRTR=m
+CONFIG_QRTR_SMD=m
 CONFIG_CAN=y
-CONFIG_CAN_AT91=m
-CONFIG_CAN_FLEXCAN=m
-CONFIG_CAN_SUN4I=y
-CONFIG_CAN_XILINXCAN=y
-CONFIG_CAN_RCAR=m
-CONFIG_CAN_MCP251X=y
 CONFIG_BT=m
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_BCM=y
 CONFIG_BT_MRVL=m
 CONFIG_BT_MRVL_SDIO=m
+CONFIG_BT_QCOMSMD=m
 CONFIG_CFG80211=m
 CONFIG_MAC80211=m
 CONFIG_RFKILL=y
@@ -194,6 +197,12 @@ CONFIG_PCI_EPF_TEST=m
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_OMAP_OCP2SCP=y
+CONFIG_ARM_SCMI_PROTOCOL=y
+CONFIG_RASPBERRYPI_FIRMWARE=y
+CONFIG_TRUSTED_FOUNDATIONS=y
+CONFIG_BCM47XX_NVRAM=y
+CONFIG_BCM47XX_SPROM=y
+CONFIG_EFI_CAPSULE_LOADER=m
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
@@ -214,7 +223,6 @@ CONFIG_MTD_NAND_DAVINCI=y
 CONFIG_MTD_NAND_STM32_FMC2=y
 CONFIG_MTD_NAND_PL35X=y
 CONFIG_MTD_SPI_NOR=y
-CONFIG_SPI_ASPEED_SMC=m
 CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
@@ -225,6 +233,7 @@ CONFIG_AD525X_DPOT_I2C=y
 CONFIG_ICS932S401=y
 CONFIG_ATMEL_SSC=m
 CONFIG_QCOM_COINCELL=m
+CONFIG_QCOM_FASTRPC=m
 CONFIG_APDS9802ALS=y
 CONFIG_ISL29003=y
 CONFIG_PCI_ENDPOINT_TEST=m
@@ -244,14 +253,13 @@ CONFIG_SATA_HIGHBANK=y
 CONFIG_SATA_MV=y
 CONFIG_SATA_RCAR=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_VENDOR_ASIX=y
-CONFIG_SPI_AX88796C=m
 CONFIG_VIRTIO_NET=y
 CONFIG_B53_SPI_DRIVER=m
 CONFIG_B53_MDIO_DRIVER=m
 CONFIG_B53_MMAP_DRIVER=m
 CONFIG_NET_DSA_BCM_SF2=m
 CONFIG_SUN4I_EMAC=y
+CONFIG_SPI_AX88796C=m
 CONFIG_BCMGENET=m
 CONFIG_BGMAC_BCMA=y
 CONFIG_SYSTEMPORT=m
@@ -266,6 +274,7 @@ CONFIG_MV643XX_ETH=y
 CONFIG_MVNETA=y
 CONFIG_PXA168_ETH=m
 CONFIG_KS8851=y
+CONFIG_LAN966X_SWITCH=m
 CONFIG_R8169=y
 CONFIG_SH_ETH=y
 CONFIG_SMSC911X=y
@@ -276,18 +285,27 @@ CONFIG_TI_CPSW=y
 CONFIG_TI_CPSW_SWITCHDEV=y
 CONFIG_TI_CPTS=y
 CONFIG_XILINX_EMACLITE=y
+CONFIG_SFP=m
 CONFIG_BROADCOM_PHY=y
 CONFIG_ICPLUS_PHY=y
 CONFIG_MARVELL_PHY=y
 CONFIG_AT803X_PHY=y
 CONFIG_ROCKCHIP_PHY=y
 CONFIG_DP83867_PHY=y
+CONFIG_CAN_AT91=m
+CONFIG_CAN_FLEXCAN=m
+CONFIG_CAN_SUN4I=y
+CONFIG_CAN_XILINXCAN=y
+CONFIG_CAN_RCAR=m
+CONFIG_CAN_MCP251X=y
+CONFIG_MDIO_MSCC_MIIM=m
 CONFIG_USB_PEGASUS=y
 CONFIG_USB_RTL8152=m
 CONFIG_USB_LAN78XX=m
 CONFIG_USB_USBNET=y
 CONFIG_USB_NET_SMSC75XX=y
 CONFIG_USB_NET_SMSC95XX=y
+CONFIG_WCN36XX=m
 CONFIG_BRCMFMAC=m
 CONFIG_MWIFIEX=m
 CONFIG_MWIFIEX_SDIO=m
@@ -316,6 +334,7 @@ CONFIG_TOUCHSCREEN_ST1232=m
 CONFIG_TOUCHSCREEN_STMPE=y
 CONFIG_TOUCHSCREEN_SUN4I=y
 CONFIG_INPUT_MISC=y
+CONFIG_INPUT_PM8941_PWRKEY=y
 CONFIG_INPUT_MAX77693_HAPTIC=m
 CONFIG_INPUT_MAX8997_HAPTIC=m
 CONFIG_INPUT_CPCAP_PWRBUTTON=m
@@ -357,8 +376,6 @@ CONFIG_SERIAL_MSM=y
 CONFIG_SERIAL_MSM_CONSOLE=y
 CONFIG_SERIAL_VT8500=y
 CONFIG_SERIAL_VT8500_CONSOLE=y
-CONFIG_SERIAL_OMAP=y
-CONFIG_SERIAL_OMAP_CONSOLE=y
 CONFIG_SERIAL_BCM63XX=y
 CONFIG_SERIAL_BCM63XX_CONSOLE=y
 CONFIG_SERIAL_XILINX_PS_UART=y
@@ -398,6 +415,8 @@ CONFIG_I2C_IMX=y
 CONFIG_I2C_MESON=y
 CONFIG_I2C_MV64XXX=y
 CONFIG_I2C_OWL=y
+CONFIG_I2C_QCOM_CCI=m
+CONFIG_I2C_QUP=y
 CONFIG_I2C_RIIC=y
 CONFIG_I2C_RK3X=y
 CONFIG_I2C_S3C2410=y
@@ -413,7 +432,9 @@ CONFIG_I2C_RCAR=y
 CONFIG_I2C_CROS_EC_TUNNEL=m
 CONFIG_I2C_SLAVE_EEPROM=y
 CONFIG_SPI=y
+CONFIG_SPI_ASPEED_SMC=m
 CONFIG_SPI_ATMEL=m
+CONFIG_SPI_ATMEL_QUADSPI=m
 CONFIG_SPI_BCM2835=y
 CONFIG_SPI_BCM2835AUX=y
 CONFIG_SPI_CADENCE=y
@@ -426,6 +447,7 @@ CONFIG_SPI_ORION=y
 CONFIG_SPI_PL022=y
 CONFIG_SPI_ROCKCHIP=m
 CONFIG_SPI_RSPI=y
+CONFIG_SPI_QUP=m
 CONFIG_SPI_S3C64XX=m
 CONFIG_SPI_SH_MSIOF=m
 CONFIG_SPI_SH_HSPI=y
@@ -439,10 +461,11 @@ CONFIG_SPI_TEGRA20_SLINK=y
 CONFIG_SPI_XILINX=y
 CONFIG_SPI_SPIDEV=y
 CONFIG_SPMI=y
-CONFIG_PTP_1588_CLOCK=y
 CONFIG_PINCTRL_AS3722=y
-CONFIG_PINCTRL_STMFX=y
+CONFIG_PINCTRL_MICROCHIP_SGPIO=y
+CONFIG_PINCTRL_OCELOT=y
 CONFIG_PINCTRL_PALMAS=y
+CONFIG_PINCTRL_STMFX=y
 CONFIG_PINCTRL_OWL=y
 CONFIG_PINCTRL_S500=y
 CONFIG_PINCTRL_MSM=y
@@ -476,6 +499,8 @@ CONFIG_GPIO_TWL4030=y
 CONFIG_POWER_RESET_AS3722=y
 CONFIG_POWER_RESET_GPIO=y
 CONFIG_POWER_RESET_GPIO_RESTART=y
+CONFIG_POWER_RESET_MSM=y
+CONFIG_POWER_RESET_QCOM_PON=y
 CONFIG_POWER_RESET_ST=y
 CONFIG_POWER_RESET_KEYSTONE=y
 CONFIG_POWER_RESET_RMOBILE=y
@@ -483,7 +508,6 @@ CONFIG_BATTERY_ACT8945A=y
 CONFIG_BATTERY_CPCAP=m
 CONFIG_BATTERY_SBS=y
 CONFIG_BATTERY_BQ27XXX=m
-CONFIG_BATTERY_ACER_A500=m
 CONFIG_AXP20X_POWER=m
 CONFIG_BATTERY_MAX17040=m
 CONFIG_BATTERY_MAX17042=m
@@ -493,10 +517,13 @@ CONFIG_CHARGER_MAX14577=m
 CONFIG_CHARGER_MAX77693=m
 CONFIG_CHARGER_MAX8997=m
 CONFIG_CHARGER_MAX8998=m
+CONFIG_CHARGER_SMB347=m
 CONFIG_CHARGER_TPS65090=y
+CONFIG_BATTERY_ACER_A500=m
 CONFIG_SENSORS_ARM_SCMI=y
 CONFIG_SENSORS_ASPEED=m
 CONFIG_SENSORS_IIO_HWMON=y
+CONFIG_SENSORS_LAN966X=m
 CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_LM95245=y
 CONFIG_SENSORS_NTC_THERMISTOR=m
@@ -516,6 +543,7 @@ CONFIG_ST_THERMAL_MEMMAP=y
 CONFIG_TEGRA_SOCTHERM=m
 CONFIG_TEGRA30_TSENSOR=m
 CONFIG_GENERIC_ADC_THERMAL=m
+CONFIG_QCOM_TSENS=y
 CONFIG_UNIPHIER_THERMAL=y
 CONFIG_DA9063_WATCHDOG=m
 CONFIG_XILINX_WATCHDOG=y
@@ -531,19 +559,21 @@ CONFIG_SUNXI_WATCHDOG=y
 CONFIG_IMX2_WDT=y
 CONFIG_ST_LPC_WATCHDOG=y
 CONFIG_TEGRA_WATCHDOG=m
+CONFIG_QCOM_WDT=m
 CONFIG_MESON_WATCHDOG=y
 CONFIG_DIGICOLOR_WATCHDOG=y
 CONFIG_RENESAS_WDT=m
 CONFIG_RENESAS_RZAWDT=m
 CONFIG_STPMIC1_WATCHDOG=y
+CONFIG_PM8916_WATCHDOG=m
 CONFIG_BCM47XX_WDT=y
 CONFIG_BCM2835_WDT=y
 CONFIG_BCM_KONA_WDT=y
 CONFIG_BCM7038_WDT=m
+CONFIG_GXP_WATCHDOG=y
 CONFIG_BCMA_HOST_SOC=y
 CONFIG_BCMA_DRIVER_GMAC_CMN=y
 CONFIG_BCMA_DRIVER_GPIO=y
-CONFIG_MFD_ACER_A500_EC=m
 CONFIG_MFD_ACT8945A=y
 CONFIG_MFD_AS3711=y
 CONFIG_MFD_AS3722=y
@@ -576,6 +606,7 @@ CONFIG_MFD_TPS6586X=y
 CONFIG_MFD_TPS65910=y
 CONFIG_MFD_STM32_LPTIMER=m
 CONFIG_MFD_STPMIC1=y
+CONFIG_MFD_ACER_A500_EC=m
 CONFIG_REGULATOR_ACT8865=y
 CONFIG_REGULATOR_ACT8945A=y
 CONFIG_REGULATOR_ANATOP=y
@@ -602,7 +633,8 @@ CONFIG_REGULATOR_PALMAS=y
 CONFIG_REGULATOR_PBIAS=y
 CONFIG_REGULATOR_PWM=y
 CONFIG_REGULATOR_QCOM_RPM=y
-CONFIG_REGULATOR_QCOM_SMD_RPM=m
+CONFIG_REGULATOR_QCOM_SMD_RPM=y
+CONFIG_REGULATOR_QCOM_SPMI=y
 CONFIG_REGULATOR_RK808=y
 CONFIG_REGULATOR_RN5T618=y
 CONFIG_REGULATOR_S2MPA01=m
@@ -629,27 +661,31 @@ CONFIG_MEDIA_SUPPORT=m
 CONFIG_MEDIA_USB_SUPPORT=y
 CONFIG_USB_VIDEO_CLASS=m
 CONFIG_V4L_PLATFORM_DRIVERS=y
-CONFIG_VIDEO_MMP_CAMERA=m
+CONFIG_V4L_MEM2MEM_DRIVERS=y
 CONFIG_VIDEO_ASPEED=m
-CONFIG_VIDEO_STM32_DCMI=m
+CONFIG_VIDEO_ATMEL_ISC=m
+CONFIG_VIDEO_ATMEL_XISC=m
+CONFIG_VIDEO_ATMEL_ISI=m
+CONFIG_VIDEO_MICROCHIP_CSI2DC=m
+CONFIG_VIDEO_MMP_CAMERA=m
+CONFIG_VIDEO_TEGRA_VDE=m
 CONFIG_VIDEO_RENESAS_CEU=m
+CONFIG_VIDEO_RCAR_VIN=m
+CONFIG_VIDEO_RENESAS_FDP1=m
+CONFIG_VIDEO_RENESAS_JPU=m
+CONFIG_VIDEO_RENESAS_VSP1=m
+CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m
 CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS=m
 CONFIG_VIDEO_S5P_FIMC=m
 CONFIG_VIDEO_S5P_MIPI_CSIS=m
 CONFIG_VIDEO_EXYNOS_FIMC_LITE=m
 CONFIG_VIDEO_EXYNOS4_FIMC_IS=m
-CONFIG_VIDEO_RCAR_VIN=m
-CONFIG_VIDEO_ATMEL_ISI=m
-CONFIG_V4L_MEM2MEM_DRIVERS=y
 CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m
 CONFIG_VIDEO_SAMSUNG_S5P_MFC=m
-CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m
 CONFIG_VIDEO_STI_BDISP=m
-CONFIG_VIDEO_STI_HVA=m
 CONFIG_VIDEO_STI_DELTA=m
-CONFIG_VIDEO_RENESAS_FDP1=m
-CONFIG_VIDEO_RENESAS_JPU=m
-CONFIG_VIDEO_RENESAS_VSP1=m
+CONFIG_VIDEO_STI_HVA=m
+CONFIG_VIDEO_STM32_DCMI=m
 CONFIG_V4L_TEST_DRIVERS=y
 CONFIG_VIDEO_VIVID=m
 CONFIG_VIDEO_ADV7180=m
@@ -660,6 +696,7 @@ CONFIG_IMX_IPUV3_CORE=m
 CONFIG_DRM=y
 # CONFIG_DRM_I2C_CH7006 is not set
 # CONFIG_DRM_I2C_SIL164 is not set
+CONFIG_DRM_I2C_NXP_TDA998X=m
 CONFIG_DRM_NOUVEAU=m
 CONFIG_DRM_EXYNOS=m
 CONFIG_DRM_EXYNOS_FIMD=y
@@ -674,7 +711,6 @@ CONFIG_ROCKCHIP_DW_MIPI_DSI=y
 CONFIG_ROCKCHIP_INNO_HDMI=y
 CONFIG_DRM_ATMEL_HLCDC=m
 CONFIG_DRM_RCAR_DU=m
-CONFIG_DRM_RCAR_LVDS=y
 CONFIG_DRM_SUN4I=m
 CONFIG_DRM_MSM=m
 CONFIG_DRM_FSL_DCU=m
@@ -685,11 +721,12 @@ CONFIG_DRM_PANEL_LVDS=m
 CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_DRM_PANEL_EDP=y
 CONFIG_DRM_PANEL_SAMSUNG_LD9040=m
-CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=m
 CONFIG_DRM_PANEL_ORISETECH_OTM8009A=m
 CONFIG_DRM_PANEL_RAYDIUM_RM68200=m
 CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03=m
 CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m
+CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=m
+CONFIG_DRM_DISPLAY_CONNECTOR=m
 CONFIG_DRM_LVDS_CODEC=m
 CONFIG_DRM_NXP_PTN3460=m
 CONFIG_DRM_PARADE_PS8622=m
@@ -706,6 +743,7 @@ CONFIG_DRM_IMX_PARALLEL_DISPLAY=m
 CONFIG_DRM_IMX_TVE=m
 CONFIG_DRM_IMX_LDB=m
 CONFIG_DRM_IMX_HDMI=m
+CONFIG_DRM_V3D=m
 CONFIG_DRM_VC4=m
 CONFIG_DRM_ETNAVIV=m
 CONFIG_DRM_MXSFB=m
@@ -737,10 +775,13 @@ CONFIG_SND_ATMEL_SOC_WM8904=m
 CONFIG_SND_ATMEL_SOC_PDMIC=m
 CONFIG_SND_ATMEL_SOC_I2S=m
 CONFIG_SND_BCM2835_SOC_I2S=m
-CONFIG_SND_SOC_FSL_SAI=m
+CONFIG_SND_IMX_SOC=m
+CONFIG_SND_SOC_FSL_ASOC_CARD=m
 CONFIG_SND_PXA_SOC_SSP=m
 CONFIG_SND_MMP_SOC_SSPA=m
 CONFIG_SND_PXA910_SOC=m
+CONFIG_SND_SOC_QCOM=m
+CONFIG_SND_SOC_APQ8016_SBC=m
 CONFIG_SND_SOC_ROCKCHIP=m
 CONFIG_SND_SOC_ROCKCHIP_SPDIF=m
 CONFIG_SND_SOC_ROCKCHIP_MAX98090=m
@@ -771,9 +812,13 @@ CONFIG_SND_SOC_TEGRA_WM9712=m
 CONFIG_SND_SOC_TEGRA_TRIMSLICE=m
 CONFIG_SND_SOC_TEGRA_ALC5632=m
 CONFIG_SND_SOC_TEGRA_MAX98090=m
+CONFIG_SND_SOC_DAVINCI_MCASP=m
+CONFIG_SND_SOC_AC97_CODEC=m
 CONFIG_SND_SOC_AK4642=m
 CONFIG_SND_SOC_CPCAP=m
 CONFIG_SND_SOC_CS42L51_I2C=m
+CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m
+CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m
 CONFIG_SND_SOC_SGTL5000=m
 CONFIG_SND_SOC_STI_SAS=m
 CONFIG_SND_SOC_WM8978=m
@@ -783,6 +828,7 @@ CONFIG_USB_OTG=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_MVEBU=y
 CONFIG_USB_XHCI_TEGRA=m
+CONFIG_USB_BRCMSTB=m
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_HCD_STI=y
 CONFIG_USB_EHCI_EXYNOS=m
@@ -812,6 +858,7 @@ CONFIG_USB_CHIPIDEA_UDC=y
 CONFIG_USB_CHIPIDEA_HOST=y
 CONFIG_USB_ISP1760=y
 CONFIG_USB_HSIC_USB3503=y
+CONFIG_USB_ONBOARD_HUB=m
 CONFIG_AB8500_USB=y
 CONFIG_KEYSTONE_USB_PHY=m
 CONFIG_NOP_USB_XCEIV=y
@@ -821,7 +868,6 @@ CONFIG_USB_GPIO_VBUS=y
 CONFIG_USB_ISP1301=y
 CONFIG_USB_MXS_PHY=y
 CONFIG_USB_GADGET=y
-CONFIG_USB_FSL_USB2=y
 CONFIG_USB_RENESAS_USBHS_UDC=m
 CONFIG_USB_ASPEED_VHUB=m
 CONFIG_USB_CONFIGFS=m
@@ -887,10 +933,10 @@ CONFIG_LEDS_CLASS_FLASH=m
 CONFIG_LEDS_CPCAP=m
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_PWM=y
-CONFIG_LEDS_MAX77693=m
 CONFIG_LEDS_MAX8997=m
 CONFIG_LEDS_ACER_A500=m
 CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_MAX77693=m
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_ONESHOT=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
@@ -936,6 +982,7 @@ CONFIG_RTC_DRV_AT91SAM9=m
 CONFIG_RTC_DRV_VT8500=y
 CONFIG_RTC_DRV_SUNXI=y
 CONFIG_RTC_DRV_MV=y
+CONFIG_RTC_DRV_PM8XXX=m
 CONFIG_RTC_DRV_TEGRA=y
 CONFIG_RTC_DRV_ST_LPC=y
 CONFIG_RTC_DRV_STM32=y
@@ -981,29 +1028,54 @@ CONFIG_CROS_EC_SPI=m
 CONFIG_COMMON_CLK_MAX77686=y
 CONFIG_COMMON_CLK_RK808=m
 CONFIG_COMMON_CLK_SCMI=y
+CONFIG_COMMON_CLK_LAN966X=y
 CONFIG_COMMON_CLK_S2MPS11=m
 CONFIG_CLK_RASPBERRYPI=y
 CONFIG_COMMON_CLK_QCOM=y
+CONFIG_QCOM_A53PLL=y
+CONFIG_QCOM_CLK_APCS_MSM8916=y
 CONFIG_QCOM_CLK_RPM=y
+CONFIG_QCOM_CLK_SMD_RPM=y
 CONFIG_APQ_MMCC_8084=y
 CONFIG_MSM_GCC_8660=y
+CONFIG_MSM_GCC_8916=y
 CONFIG_MSM_MMCC_8960=y
 CONFIG_MSM_MMCC_8974=y
-CONFIG_MICROCHIP_PIT64B=y
+CONFIG_HWSPINLOCK=y
+CONFIG_HWSPINLOCK_QCOM=y
 CONFIG_BCM2835_MBOX=y
+CONFIG_QCOM_APCS_IPC=y
+CONFIG_QCOM_IPCC=y
 CONFIG_ROCKCHIP_IOMMU=y
 CONFIG_TEGRA_IOMMU_GART=y
 CONFIG_TEGRA_IOMMU_SMMU=y
 CONFIG_EXYNOS_IOMMU=y
+CONFIG_QCOM_IOMMU=y
 CONFIG_REMOTEPROC=y
+CONFIG_QCOM_Q6V5_MSS=m
+CONFIG_QCOM_SYSMON=m
+CONFIG_QCOM_WCNSS_PIL=m
 CONFIG_ST_REMOTEPROC=m
+CONFIG_RPMSG_QCOM_SMD=y
 CONFIG_RPMSG_VIRTIO=m
 CONFIG_ASPEED_LPC_CTRL=m
 CONFIG_ASPEED_LPC_SNOOP=m
 CONFIG_ASPEED_P2A_CTRL=m
 CONFIG_RASPBERRYPI_POWER=y
+CONFIG_QCOM_COMMAND_DB=m
+CONFIG_QCOM_CPR=y
 CONFIG_QCOM_GSBI=y
-CONFIG_QCOM_SMD_RPM=m
+CONFIG_QCOM_OCMEM=m
+CONFIG_QCOM_RMTFS_MEM=m
+CONFIG_QCOM_RPMH=y
+CONFIG_QCOM_RPMHPD=y
+CONFIG_QCOM_RPMPD=y
+CONFIG_QCOM_SMEM=y
+CONFIG_QCOM_SMD_RPM=y
+CONFIG_QCOM_SMP2P=y
+CONFIG_QCOM_SMSM=y
+CONFIG_QCOM_SOCINFO=m
+CONFIG_QCOM_STATS=m
 CONFIG_QCOM_WCNSS_CTRL=m
 CONFIG_ARCH_EMEV2=y
 CONFIG_ARCH_R8A7794=y
@@ -1036,6 +1108,7 @@ CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP=m
 CONFIG_EXTCON_MAX14577=m
 CONFIG_EXTCON_MAX77693=m
 CONFIG_EXTCON_MAX8997=m
+CONFIG_EXTCON_USB_GPIO=y
 CONFIG_TI_AEMIF=y
 CONFIG_STM32_FMC2_EBI=y
 CONFIG_EXYNOS5422_DMC=m
@@ -1048,6 +1121,7 @@ CONFIG_BERLIN2_ADC=m
 CONFIG_CPCAP_ADC=m
 CONFIG_EXYNOS_ADC=m
 CONFIG_MESON_SARADC=m
+CONFIG_QCOM_SPMI_VADC=m
 CONFIG_ROCKCHIP_SARADC=m
 CONFIG_STM32_ADC_CORE=m
 CONFIG_STM32_ADC=m
@@ -1085,14 +1159,18 @@ CONFIG_PWM_SUN4I=y
 CONFIG_PWM_TEGRA=y
 CONFIG_PWM_VT8500=y
 CONFIG_KEYSTONE_IRQ=y
+CONFIG_RESET_MCHP_SPARX5=y
 CONFIG_PHY_SUN4I_USB=y
 CONFIG_PHY_SUN9I_USB=y
+CONFIG_PHY_BRCM_USB=m
 CONFIG_PHY_HIX5HD2_SATA=y
 CONFIG_PHY_BERLIN_SATA=y
 CONFIG_PHY_BERLIN_USB=y
 CONFIG_PHY_MMP3_USB=m
+CONFIG_PHY_LAN966X_SERDES=m
 CONFIG_PHY_CPCAP_USB=m
 CONFIG_PHY_QCOM_APQ8064_SATA=m
+CONFIG_PHY_QCOM_USB_HS=y
 CONFIG_PHY_RCAR_GEN2=m
 CONFIG_PHY_ROCKCHIP_DP=m
 CONFIG_PHY_ROCKCHIP_USB=y
@@ -1110,10 +1188,11 @@ CONFIG_TI_PIPE3=y
 CONFIG_TWL4030_USB=m
 CONFIG_RAS=y
 CONFIG_NVMEM_IMX_OCOTP=y
-CONFIG_ROCKCHIP_EFUSE=m
+CONFIG_NVMEM_QCOM_QFPROM=y
+CONFIG_NVMEM_ROCKCHIP_EFUSE=m
 CONFIG_NVMEM_SUNXI_SID=y
 CONFIG_NVMEM_VF610_OCOTP=y
-CONFIG_MESON_MX_EFUSE=m
+CONFIG_NVMEM_MESON_MX_EFUSE=m
 CONFIG_NVMEM_RMEM=m
 CONFIG_FSI=m
 CONFIG_FSI_MASTER_GPIO=m
@@ -1122,6 +1201,8 @@ CONFIG_FSI_MASTER_ASPEED=m
 CONFIG_FSI_SCOM=m
 CONFIG_FSI_SBEFIFO=m
 CONFIG_FSI_OCC=m
+CONFIG_INTERCONNECT_QCOM=y
+CONFIG_INTERCONNECT_QCOM_MSM8916=y
 CONFIG_COUNTER=m
 CONFIG_STM32_TIMER_CNT=m
 CONFIG_STM32_LPTIMER_CNT=m
@@ -1161,6 +1242,8 @@ CONFIG_CRYPTO_DEV_ATMEL_AES=m
 CONFIG_CRYPTO_DEV_ATMEL_TDES=m
 CONFIG_CRYPTO_DEV_ATMEL_SHA=m
 CONFIG_CRYPTO_DEV_MARVELL_CESA=m
+CONFIG_CRYPTO_DEV_QCE=m
+CONFIG_CRYPTO_DEV_QCOM_RNG=m
 CONFIG_CRYPTO_DEV_ROCKCHIP=m
 CONFIG_CRYPTO_DEV_STM32_CRC=m
 CONFIG_CRYPTO_DEV_STM32_HASH=m
diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig
index cd703c15798f..877c5150a987 100644
--- a/arch/arm/configs/mv78xx0_defconfig
+++ b/arch/arm/configs/mv78xx0_defconfig
@@ -1,14 +1,12 @@
 CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_SLUB_DEBUG is not set
 CONFIG_PROFILING=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_MULTI_V5=y
 # CONFIG_ARCH_MULTI_V6 is not set
 # CONFIG_ARCH_MULTI_V7 is not set
@@ -16,15 +14,16 @@ CONFIG_ARCH_MV78XX0=y
 CONFIG_MACH_DB78X00_BP=y
 CONFIG_MACH_RD78X00_MASA=y
 CONFIG_MACH_TERASTATION_WXL=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_FPE_NWFPE=y
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_VFP=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_BSD_DISKLABEL=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -52,25 +51,26 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=m
 CONFIG_CHR_DEV_SG=m
+# CONFIG_BLK_DEV_BSG is not set
 CONFIG_ATA=y
 CONFIG_SATA_MV=y
 CONFIG_NETDEVICES=y
-CONFIG_MARVELL_PHY=y
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_NET_PCI=y
 CONFIG_MV643XX_ETH=y
 # CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_MARVELL_PHY=y
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
+CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
@@ -110,21 +110,20 @@ CONFIG_CRAMFS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BSD_DISKLABEL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
+# CONFIG_SLUB_DEBUG is not set
 CONFIG_SCHEDSTATS=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/configs/mvebu_v5_defconfig b/arch/arm/configs/mvebu_v5_defconfig
index d57ff30dabff..2467afd32146 100644
--- a/arch/arm/configs/mvebu_v5_defconfig
+++ b/arch/arm/configs/mvebu_v5_defconfig
@@ -1,19 +1,14 @@
 CONFIG_SYSVIPC=y
 CONFIG_FHANDLE=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
 CONFIG_LOG_BUF_SHIFT=19
 CONFIG_PROFILING=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_MVEBU=y
 CONFIG_MACH_KIRKWOOD=y
 CONFIG_ARCH_ORION5X=y
-CONFIG_MACH_DB88F5281=y
-CONFIG_MACH_RD88F5182=y
 CONFIG_MACH_RD88F5182_DT=y
 CONFIG_MACH_KUROBOX_PRO=y
 CONFIG_MACH_DNS323=y
@@ -22,24 +17,14 @@ CONFIG_MACH_TERASTATION_PRO2=y
 CONFIG_MACH_LINKSTATION_PRO=y
 CONFIG_MACH_LINKSTATION_LSCHL=y
 CONFIG_MACH_LINKSTATION_MINI=y
-CONFIG_MACH_LINKSTATION_LS_HGL=y
 CONFIG_MACH_TS409=y
-CONFIG_MACH_WRT350N_V2=y
 CONFIG_MACH_TS78XX=y
 CONFIG_MACH_MV2120=y
 CONFIG_MACH_D2NET_DT=y
 CONFIG_MACH_NET2BIG=y
 CONFIG_MACH_MSS2_DT=y
-CONFIG_MACH_WNR854T=y
-CONFIG_MACH_RD88F5181L_GE=y
-CONFIG_MACH_RD88F5181L_FXO=y
-CONFIG_MACH_RD88F6183AP_GE=y
-CONFIG_PCI_MVEBU=y
-CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CPU_FREQ=y
@@ -47,6 +32,9 @@ CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_IDLE=y
 CONFIG_ARM_KIRKWOOD_CPUIDLE=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -61,6 +49,7 @@ CONFIG_NET_SWITCHDEV=y
 CONFIG_NET_PKTGEN=m
 CONFIG_CFG80211=y
 CONFIG_MAC80211=y
+CONFIG_PCI_MVEBU=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
@@ -84,6 +73,7 @@ CONFIG_EEPROM_AT24=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=m
 CONFIG_CHR_DEV_SG=m
+# CONFIG_BLK_DEV_BSG is not set
 CONFIG_ATA=y
 CONFIG_SATA_AHCI=y
 CONFIG_SATA_MV=y
@@ -93,9 +83,9 @@ CONFIG_NET_DSA_MV88E6XXX=y
 CONFIG_MV643XX_ETH=y
 CONFIG_R8169=y
 CONFIG_MARVELL_PHY=y
-CONFIG_MWL8K=m
 CONFIG_LIBERTAS=y
 CONFIG_LIBERTAS_SDIO=y
+CONFIG_MWL8K=m
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
@@ -194,16 +184,16 @@ CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
 CONFIG_NLS_UTF8=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_FS=y
-CONFIG_MAGIC_SYSRQ=y
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_DEV_MARVELL_CESA=y
+CONFIG_CRC_CCITT=y
+CONFIG_LIBCRC32C=y
 CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_USER=y
-CONFIG_CRYPTO_DEV_MARVELL_CESA=y
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRC_CCITT=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/mvebu_v7_defconfig b/arch/arm/configs/mvebu_v7_defconfig
index 7b713c083a2a..68a18264f31b 100644
--- a/arch/arm/configs/mvebu_v7_defconfig
+++ b/arch/arm/configs/mvebu_v7_defconfig
@@ -4,7 +4,6 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
-CONFIG_SLAB=y
 CONFIG_ARCH_MVEBU=y
 CONFIG_MACH_ARMADA_370=y
 CONFIG_MACH_ARMADA_375=y
@@ -24,6 +23,7 @@ CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
+CONFIG_SLAB=y
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -147,7 +147,7 @@ CONFIG_NLS_UTF8=y
 CONFIG_CRYPTO_DEV_MARVELL_CESA=y
 CONFIG_PRINTK_TIME=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index ca32446b187f..feb38a94c1a7 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -1,5 +1,5 @@
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_TASKSTATS=y
@@ -15,7 +15,6 @@ CONFIG_CGROUPS=y
 # CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_PERF_EVENTS=y
-# CONFIG_COMPAT_BRK is not set
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_MXS=y
 CONFIG_AEABI=y
@@ -25,6 +24,7 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_BLK_DEV_INTEGRITY=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -38,7 +38,6 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 CONFIG_CAN=m
-CONFIG_CAN_FLEXCAN=m
 # CONFIG_WIRELESS is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@@ -62,6 +61,7 @@ CONFIG_ICPLUS_PHY=y
 CONFIG_MICREL_PHY=y
 CONFIG_REALTEK_PHY=y
 CONFIG_SMSC_PHY=y
+CONFIG_CAN_FLEXCAN=m
 CONFIG_USB_USBNET=y
 CONFIG_USB_NET_SMSC95XX=y
 # CONFIG_WLAN is not set
@@ -93,6 +93,7 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_DRM=y
 CONFIG_DRM_PANEL_SEIKO_43WVF1G=y
 CONFIG_DRM_MXSFB=y
+CONFIG_FB=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
@@ -162,10 +163,10 @@ CONFIG_CRC_ITU_T=m
 CONFIG_CRC7=m
 CONFIG_FONTS=y
 CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_PROVE_LOCKING=y
 CONFIG_BLK_DEV_IO_TRACE=y
diff --git a/arch/arm/configs/neponset_defconfig b/arch/arm/configs/neponset_defconfig
index 018a1092d0e7..c333406ce5e3 100644
--- a/arch/arm/configs/neponset_defconfig
+++ b/arch/arm/configs/neponset_defconfig
@@ -1,31 +1,32 @@
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
+CONFIG_ARCH_MULTI_V4=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_SA1100=y
 CONFIG_SA1100_ASSABET=y
 CONFIG_ASSABET_NEPONSET=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_SA1100=y
-CONFIG_PCMCIA_SA1111=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
 CONFIG_ZBOOT_ROM_TEXT=0x80000
 CONFIG_ZBOOT_ROM_BSS=0xc1000000
 CONFIG_ZBOOT_ROM=y
 CONFIG_CMDLINE="console=ttySA0,38400n8 cpufreq=221200 rw root=/dev/mtdblock2 mtdparts=sa1100:512K(boot),1M(kernel),2560K(initrd),4M(root) load_ramdisk=1 prompt_ramdisk=0 mem=32M noinitrd initrd=0xc0800000,3M"
 CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=y
 CONFIG_PM=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_MSDOS_PARTITION is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
 # CONFIG_IPV6 is not set
+CONFIG_PCCARD=y
+CONFIG_PCMCIA_SA1100=y
+CONFIG_PCMCIA_SA1111=y
 CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
@@ -39,20 +40,20 @@ CONFIG_BLK_DEV_SD=m
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_NET_VENDOR_SMC=y
+CONFIG_PCMCIA_PCNET=y
 CONFIG_SMC9194=y
 CONFIG_SMC91X=y
 CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_PCNET=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_SERIO_SERPORT=m
 CONFIG_SERIO_SA1111=y
-CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_LEGACY_PTY_COUNT=64
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CS=y
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=64
+CONFIG_SERIAL_NONSTANDARD=y
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_WATCHDOG=y
@@ -68,17 +69,19 @@ CONFIG_USB=m
 CONFIG_USB_MON=m
 CONFIG_USB_OHCI_HCD=m
 CONFIG_USB_STORAGE=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_CPU=y
 CONFIG_EXT2_FS=y
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
 CONFIG_JFFS2_FS=y
 CONFIG_NFS_FS=y
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_MSDOS_PARTITION is not set
 CONFIG_NLS=y
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_ISO8859_1=m
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/netwinder_defconfig b/arch/arm/configs/netwinder_defconfig
index 2e3b20ef0db1..30ff6fbce5a3 100644
--- a/arch/arm/configs/netwinder_defconfig
+++ b/arch/arm/configs/netwinder_defconfig
@@ -1,15 +1,13 @@
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
+CONFIG_ARCH_MULTI_V4=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_FOOTBRIDGE=y
 CONFIG_ARCH_NETWINDER=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
 CONFIG_DEPRECATED_PARAM_STRUCT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=0x801"
 CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=y
+CONFIG_PARTITION_ADVANCED=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -51,9 +49,6 @@ CONFIG_977_WATCHDOG=y
 CONFIG_FB=y
 CONFIG_FB_CYBER2000=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 CONFIG_SOUND=y
 CONFIG_SOUND_PRIME=y
@@ -62,6 +57,10 @@ CONFIG_SOUND_TRACEINIT=y
 CONFIG_SOUND_DMAP=y
 CONFIG_SOUND_YM3812=y
 CONFIG_SOUND_WAVEARTIST=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_CPU=y
 CONFIG_EXT2_FS=y
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
@@ -71,9 +70,7 @@ CONFIG_NFS_V3=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
 CONFIG_SMB_FS=y
-CONFIG_PARTITION_ADVANCED=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_CODEPAGE_852=y
@@ -81,6 +78,9 @@ CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
 CONFIG_NLS_ISO8859_15=y
 CONFIG_NLS_UTF8=y
-CONFIG_MAGIC_SYSRQ=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
 CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig
index 907d6512821a..d5881de42018 100644
--- a/arch/arm/configs/nhk8815_defconfig
+++ b/arch/arm/configs/nhk8815_defconfig
@@ -1,5 +1,4 @@
 # CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -10,14 +9,14 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_SLAB=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_NOMADIK=y
 CONFIG_MACH_NOMADIK_8815NHK=y
 CONFIG_AEABI=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_SWAP is not set
+CONFIG_SLAB=y
 CONFIG_CMA=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -59,6 +58,7 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_SG=y
+# CONFIG_BLK_DEV_BSG is not set
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SCAN_ASYNC=y
@@ -135,7 +135,7 @@ CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_DES=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_DEBUG_FS=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set
diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig
index 3148567b66b6..70511fe4b3ec 100644
--- a/arch/arm/configs/omap1_defconfig
+++ b/arch/arm/configs/omap1_defconfig
@@ -1,61 +1,49 @@
-# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_IKCONFIG=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
-# CONFIG_KALLSYMS is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_BASE_FULL is not set
 # CONFIG_SHMEM is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLOB=y
+# CONFIG_KALLSYMS is not set
 CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_MULTI_V4T=y
+CONFIG_ARCH_MULTI_V5=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_OMAP=y
 CONFIG_ARCH_OMAP1=y
-CONFIG_OMAP_RESET_CLOCKS=y
-# CONFIG_OMAP_MUX is not set
 CONFIG_OMAP_32K_TIMER=y
 CONFIG_OMAP_DM_TIMER=y
 CONFIG_ARCH_OMAP730=y
 CONFIG_ARCH_OMAP850=y
 CONFIG_ARCH_OMAP16XX=y
-CONFIG_MACH_OMAP_INNOVATOR=y
-CONFIG_MACH_OMAP_H2=y
-CONFIG_MACH_OMAP_H3=y
-CONFIG_MACH_HERALD=y
+# CONFIG_OMAP_MUX is not set
+CONFIG_OMAP_RESET_CLOCKS=y
 CONFIG_MACH_OMAP_OSK=y
-CONFIG_MACH_OMAP_PERSEUS2=y
-CONFIG_MACH_OMAP_FSAMPLE=y
-CONFIG_MACH_VOICEBLUE=y
 CONFIG_MACH_OMAP_PALMTE=y
-CONFIG_MACH_OMAP_PALMZ71=y
-CONFIG_MACH_OMAP_PALMTT=y
 CONFIG_MACH_SX1=y
 CONFIG_MACH_NOKIA770=y
 CONFIG_MACH_AMS_DELTA=y
 CONFIG_MACH_OMAP_GENERIC=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PCCARD=y
-CONFIG_OMAP_CF=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
 CONFIG_AEABI=y
-CONFIG_LEDS=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=1f03 rootfstype=jffs2"
 CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
 # CONFIG_SUSPEND is not set
+CONFIG_PM=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_BINFMT_MISC=y
+# CONFIG_SWAP is not set
+CONFIG_SLOB=y
+# CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -76,6 +64,8 @@ CONFIG_BT_RFCOMM=y
 CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=y
 CONFIG_BT_HIDP=y
+CONFIG_PCCARD=y
+CONFIG_OMAP_CF=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_CONNECTOR=y
@@ -96,12 +86,21 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
 CONFIG_BLK_DEV_SR=y
 CONFIG_CHR_DEV_SG=y
+# CONFIG_BLK_DEV_BSG is not set
 CONFIG_ATA=m
 CONFIG_PATA_PCMCIA=m
 CONFIG_NETDEVICES=y
 CONFIG_TUN=y
 CONFIG_PHYLIB=y
 CONFIG_SMC91X=y
+CONFIG_PPP=y
+CONFIG_PPP_BSDCOMP=y
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_ASYNC=y
+CONFIG_SLIP=y
+CONFIG_SLIP_COMPRESSED=y
 CONFIG_USB_CATC=y
 CONFIG_USB_KAWETH=y
 CONFIG_USB_PEGASUS=y
@@ -109,14 +108,6 @@ CONFIG_USB_RTL8150=y
 CONFIG_USB_USBNET=y
 # CONFIG_USB_NET_AX8817X is not set
 # CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_PPP=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=y
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=y
-CONFIG_SLIP=y
-CONFIG_SLIP_COMPRESSED=y
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_EVBUG=y
@@ -127,11 +118,11 @@ CONFIG_TOUCHSCREEN_ADS7846=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_UINPUT=y
 # CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=3
 CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-# CONFIG_LEGACY_PTYS is not set
 CONFIG_HW_RANDOM=y
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
@@ -153,11 +144,6 @@ CONFIG_FB_OMAP_LCD_MIPID=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_FONT_6x11=y
-CONFIG_FONT_MINI_4x6=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
@@ -219,7 +205,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_CODEPAGE_852=y
@@ -232,13 +217,7 @@ CONFIG_NLS_ISO8859_15=y
 CONFIG_NLS_KOI8_R=y
 CONFIG_NLS_UTF8=y
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
 CONFIG_SECURITY=y
 CONFIG_CRYPTO_ECB=y
 CONFIG_CRYPTO_PCBC=y
@@ -246,3 +225,14 @@ CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_LZO=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_LIBCRC32C=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_FONT_6x11=y
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index d933b787d934..2a66850d3288 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -2,7 +2,7 @@ CONFIG_KERNEL_LZMA=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_AUDIT=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_IKCONFIG=y
@@ -22,11 +22,8 @@ CONFIG_CGROUP_PERF=y
 CONFIG_NAMESPACES=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
-CONFIG_SLAB=y
 CONFIG_PROFILING=y
 CONFIG_ARCH_MULTI_V6=y
-CONFIG_POWER_AVS_OMAP=y
-CONFIG_POWER_AVS_OMAP_CLASS3=y
 CONFIG_OMAP_RESET_CLOCKS=y
 CONFIG_ARCH_OMAP2=y
 CONFIG_ARCH_OMAP3=y
@@ -35,6 +32,8 @@ CONFIG_SOC_OMAP5=y
 CONFIG_SOC_AM33XX=y
 CONFIG_SOC_AM43XX=y
 CONFIG_SOC_DRA7XX=y
+CONFIG_POWER_AVS_OMAP=y
+CONFIG_POWER_AVS_OMAP_CLASS3=y
 CONFIG_ARM_THUMBEE=y
 CONFIG_ARM_ERRATA_411920=y
 CONFIG_SMP=y
@@ -54,7 +53,6 @@ CONFIG_CPU_IDLE=y
 CONFIG_ARM_CPUIDLE=y
 CONFIG_KERNEL_MODE_NEON=y
 CONFIG_PM_DEBUG=y
-CONFIG_ARM_CRYPTO=y
 CONFIG_CRYPTO_SHA1_ARM_NEON=m
 CONFIG_CRYPTO_SHA256_ARM=m
 CONFIG_CRYPTO_SHA512_ARM=m
@@ -69,9 +67,9 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_BINFMT_MISC=y
+CONFIG_SLAB=y
 CONFIG_CMA=y
 CONFIG_ZSMALLOC=m
 CONFIG_NET=y
@@ -250,8 +248,6 @@ CONFIG_NET_ACT_POLICE=m
 CONFIG_NET_ACT_GACT=m
 CONFIG_NET_SWITCHDEV=y
 CONFIG_CAN=m
-CONFIG_CAN_C_CAN=m
-CONFIG_CAN_C_CAN_PLATFORM=m
 CONFIG_BT=m
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
@@ -316,6 +312,7 @@ CONFIG_PCI_ENDPOINT_TEST=m
 CONFIG_EEPROM_AT24=m
 CONFIG_EEPROM_AT25=m
 CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
 CONFIG_SCSI_SCAN_ASYNC=y
 CONFIG_ATA=y
 CONFIG_SATA_AHCI_PLATFORM=y
@@ -350,6 +347,8 @@ CONFIG_AT803X_PHY=y
 CONFIG_SMSC_PHY=y
 CONFIG_DP83848_PHY=y
 CONFIG_DP83867_PHY=y
+CONFIG_CAN_C_CAN=m
+CONFIG_CAN_C_CAN_PLATFORM=m
 CONFIG_PPP=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_DEFLATE=m
@@ -419,8 +418,6 @@ CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
 CONFIG_SERIAL_8250_OMAP=y
 CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIAL_OMAP=y
-CONFIG_SERIAL_OMAP_CONSOLE=y
 CONFIG_SERIAL_DEV_BUS=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_SPI=y
@@ -430,7 +427,6 @@ CONFIG_SPI_TI_QSPI=m
 CONFIG_HSI=m
 CONFIG_OMAP_SSI=m
 CONFIG_SSI_PROTOCOL=m
-CONFIG_PTP_1588_CLOCK=y
 CONFIG_PINCTRL_SINGLE=y
 CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
@@ -494,15 +490,15 @@ CONFIG_REGULATOR_TWL4030=y
 CONFIG_RC_CORE=m
 CONFIG_LIRC=y
 CONFIG_RC_DEVICES=y
-CONFIG_IR_SPI=m
-CONFIG_IR_RX51=m
 CONFIG_IR_GPIO_TX=m
 CONFIG_IR_PWM_TX=m
+CONFIG_IR_RX51=m
+CONFIG_IR_SPI=m
 CONFIG_MEDIA_SUPPORT=m
 CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_VIDEO_OMAP3=m
-CONFIG_VIDEO_TVP5150=m
 CONFIG_VIDEO_MT9P031=m
+CONFIG_VIDEO_TVP5150=m
 CONFIG_DRM=m
 CONFIG_DRM_OMAP=m
 CONFIG_OMAP5_DSS_HDMI=y
@@ -553,6 +549,8 @@ CONFIG_SND_SOC_OMAP_ABE_TWL6040=m
 CONFIG_SND_SOC_OMAP_HDMI=m
 CONFIG_SND_SOC_CPCAP=m
 CONFIG_SND_SOC_TLV320AIC23_I2C=m
+CONFIG_SND_SOC_TLV320AIC3X=m
+CONFIG_SND_SOC_TLV320AIC3X_I2C=m
 CONFIG_SND_SIMPLE_CARD=m
 CONFIG_SND_AUDIO_GRAPH_CARD=m
 CONFIG_HID_GENERIC=m
@@ -576,6 +574,7 @@ CONFIG_USB_INVENTRA_DMA=y
 CONFIG_USB_TI_CPPI41_DMA=y
 CONFIG_USB_TUSB_OMAP_DMA=y
 CONFIG_USB_DWC3=m
+CONFIG_USB_ISP1760=m
 CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_GENERIC=y
 CONFIG_USB_SERIAL_SIMPLE=m
@@ -723,9 +722,8 @@ CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
 CONFIG_PRINTK_TIME=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_INFO_SPLIT=y
 CONFIG_DEBUG_INFO_DWARF4=y
+CONFIG_DEBUG_INFO_SPLIT=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 CONFIG_SCHEDSTATS=y
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index b9e3b647e732..0629b088a584 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -1,23 +1,14 @@
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_EXPERT=y
-# CONFIG_SLUB_DEBUG is not set
 CONFIG_PROFILING=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BSD_DISKLABEL=y
 CONFIG_ARCH_MULTI_V5=y
 # CONFIG_ARCH_MULTI_V6 is not set
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_ORION5X=y
-CONFIG_ARCH_ORION5X_DT=y
-CONFIG_MACH_DB88F5281=y
-CONFIG_MACH_RD88F5182=y
 CONFIG_MACH_RD88F5182_DT=y
 CONFIG_MACH_KUROBOX_PRO=y
 CONFIG_MACH_DNS323=y
@@ -25,28 +16,20 @@ CONFIG_MACH_TS209=y
 CONFIG_MACH_TERASTATION_PRO2=y
 CONFIG_MACH_LINKSTATION_PRO=y
 CONFIG_MACH_LINKSTATION_MINI=y
-CONFIG_MACH_LINKSTATION_LS_HGL=y
 CONFIG_MACH_TS409=y
-CONFIG_MACH_WRT350N_V2=y
 CONFIG_MACH_TS78XX=y
 CONFIG_MACH_MV2120=y
-CONFIG_MACH_EDMINI_V2_DT=y
-CONFIG_MACH_D2NET=y
-CONFIG_MACH_BIGDISK=y
 CONFIG_MACH_NET2BIG=y
-CONFIG_MACH_MSS2=y
-CONFIG_MACH_WNR854T=y
-CONFIG_MACH_RD88F5181L_GE=y
-CONFIG_MACH_RD88F5181L_FXO=y
-CONFIG_MACH_RD88F6183AP_GE=y
-CONFIG_PREEMPT=y
 CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_FPE_NWFPE=y
 CONFIG_VFP=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_BSD_DISKLABEL=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -58,6 +41,7 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IPV6 is not set
 CONFIG_NET_DSA=y
 CONFIG_NET_PKTGEN=m
+# CONFIG_VGA_ARB is not set
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
@@ -69,13 +53,14 @@ CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_NAND_PLATFORM=y
 CONFIG_MTD_NAND_ORION=y
+CONFIG_MTD_NAND_PLATFORM=y
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=m
 CONFIG_CHR_DEV_SG=m
+# CONFIG_BLK_DEV_BSG is not set
 CONFIG_ATA=y
 CONFIG_SATA_MV=y
 CONFIG_NETDEVICES=y
@@ -103,7 +88,6 @@ CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MV64XXX=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_SENSORS_LM75=y
-# CONFIG_VGA_ARB is not set
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
@@ -148,17 +132,18 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_DEV_MARVELL_CESA=y
+CONFIG_CRC_T10DIF=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
+# CONFIG_SLUB_DEBUG is not set
 CONFIG_LATENCYTOP=y
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_DEV_MARVELL_CESA=y
-CONFIG_CRC_T10DIF=y
diff --git a/arch/arm/configs/oxnas_v6_defconfig b/arch/arm/configs/oxnas_v6_defconfig
index de37f7e90999..70a67b3fc91b 100644
--- a/arch/arm/configs/oxnas_v6_defconfig
+++ b/arch/arm/configs/oxnas_v6_defconfig
@@ -1,5 +1,5 @@
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
@@ -7,17 +7,12 @@ CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
 CONFIG_STRICT_KERNEL_RWX=y
 CONFIG_STRICT_MODULE_RWX=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_CMDLINE_PARTITION=y
 CONFIG_ARCH_MULTI_V6=y
 CONFIG_ARCH_OXNAS=y
 CONFIG_MACH_OX820=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=16
-CONFIG_CMA=y
-CONFIG_FORCE_MAX_ZONEORDER=12
+CONFIG_ARCH_FORCE_MAX_ORDER=12
 CONFIG_SECCOMP=y
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
@@ -26,6 +21,11 @@ CONFIG_EFI=y
 CONFIG_CPU_IDLE=y
 CONFIG_ARM_CPUIDLE=y
 CONFIG_VFP=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_CMDLINE_PARTITION=y
+CONFIG_CMA=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -44,8 +44,6 @@ CONFIG_IPV6_TUNNEL=m
 CONFIG_IPV6_MULTIPLE_TABLES=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_DMA_CMA=y
-CONFIG_CMA_SIZE_MBYTES=64
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
@@ -88,5 +86,7 @@ CONFIG_PSTORE_RAM=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
+CONFIG_DMA_CMA=y
+CONFIG_CMA_SIZE_MBYTES=64
 CONFIG_PRINTK_TIME=y
 CONFIG_MAGIC_SYSRQ=y
diff --git a/arch/arm/configs/palmz72_defconfig b/arch/arm/configs/palmz72_defconfig
index b47c8abe85bc..a9a808bc2f70 100644
--- a/arch/arm/configs/palmz72_defconfig
+++ b/arch/arm/configs/palmz72_defconfig
@@ -1,23 +1,23 @@
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
+CONFIG_PREEMPT=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_PXA=y
 CONFIG_ARCH_PXA_PALM=y
 # CONFIG_MACH_PALMTX is not set
-CONFIG_PREEMPT=y
 CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="mem=32M console=tty root=/dev/mmcblk0"
 CONFIG_FPE_NWFPE=y
 CONFIG_PM=y
 CONFIG_APM_EMULATION=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_SLAB=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -51,8 +51,6 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_PWM=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
 CONFIG_MMC_DEBUG=y
@@ -71,5 +69,7 @@ CONFIG_TMPFS=y
 CONFIG_NLS_DEFAULT="utf8"
 CONFIG_NLS_CODEPAGE_866=y
 CONFIG_NLS_UTF8=y
-CONFIG_DEBUG_USER=y
 CONFIG_CRC_T10DIF=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/pcm027_defconfig b/arch/arm/configs/pcm027_defconfig
index e97a158081fc..a392312a13ce 100644
--- a/arch/arm/configs/pcm027_defconfig
+++ b/arch/arm/configs/pcm027_defconfig
@@ -1,6 +1,8 @@
-# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
@@ -8,21 +10,19 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
 # CONFIG_KALLSYMS is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_PXA=y
 CONFIG_MACH_PCM027=y
 CONFIG_MACH_PCM990_BASEBOARD=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_SWAP is not set
+CONFIG_SLAB=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -42,6 +42,7 @@ CONFIG_MTD_PHYSMAP=y
 # CONFIG_BLK_DEV is not set
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
@@ -50,9 +51,9 @@ CONFIG_SMC91X=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
@@ -83,7 +84,6 @@ CONFIG_JFFS2_FS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
 CONFIG_NLS_DEFAULT="iso8859-15"
 CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_ISO8859_15=y
diff --git a/arch/arm/configs/pleb_defconfig b/arch/arm/configs/pleb_defconfig
index 2170148b975c..fd2667873273 100644
--- a/arch/arm/configs/pleb_defconfig
+++ b/arch/arm/configs/pleb_defconfig
@@ -1,19 +1,20 @@
-# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 # CONFIG_HOTPLUG is not set
 # CONFIG_SHMEM is not set
-CONFIG_MODULES=y
+CONFIG_ARCH_MULTI_V4=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_SA1100=y
 CONFIG_SA1100_PLEB=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="console=ttySA0,9600 mem=16M@0xc0000000 mem=16M@0xc8000000 root=/dev/ram initrd=0xc0400000,4M"
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
 CONFIG_FPE_NWFPE=y
+CONFIG_MODULES=y
+# CONFIG_SWAP is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -21,9 +22,9 @@ CONFIG_INET=y
 CONFIG_SYN_COOKIES=y
 # CONFIG_IPV6 is not set
 CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
diff --git a/arch/arm/configs/pxa168_defconfig b/arch/arm/configs/pxa168_defconfig
index 0947f022954d..826ebbef2e3c 100644
--- a/arch/arm/configs/pxa168_defconfig
+++ b/arch/arm/configs/pxa168_defconfig
@@ -1,23 +1,21 @@
 CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_MMP=y
 CONFIG_MACH_ASPENITE=y
 CONFIG_MACH_ZYLONITE2=y
 CONFIG_MACH_AVENGERS_LITE=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_ARCH_MMP=y
 CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M"
 CONFIG_FPE_NWFPE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_SLAB=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -34,9 +32,9 @@ CONFIG_SMC91X=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
 # CONFIG_VGA_CONSOLE is not set
@@ -49,12 +47,12 @@ CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
+CONFIG_CRC_CCITT=y
 CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_MAGIC_SYSRQ=y
 # CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/pxa255-idp_defconfig b/arch/arm/configs/pxa255-idp_defconfig
index 4a383afa5e87..ae0444949a87 100644
--- a/arch/arm/configs/pxa255-idp_defconfig
+++ b/arch/arm/configs/pxa255-idp_defconfig
@@ -1,15 +1,12 @@
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_MODULES=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_PXA=y
 CONFIG_ARCH_PXA_IDP=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="root=/dev/nfs ip=dhcp console=ttyS0,115200 mem=64M"
 CONFIG_FPE_NWFPE=y
+CONFIG_MODULES=y
 CONFIG_NET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
@@ -37,18 +34,22 @@ CONFIG_FB=y
 CONFIG_FB_PXA=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_CPU=y
 CONFIG_EXT2_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_JFFS2_FS=y
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
 CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/pxa3xx_defconfig b/arch/arm/configs/pxa3xx_defconfig
index f0c34017f2aa..d1e83b52e03a 100644
--- a/arch/arm/configs/pxa3xx_defconfig
+++ b/arch/arm/configs/pxa3xx_defconfig
@@ -1,21 +1,18 @@
 CONFIG_SYSVIPC=y
+CONFIG_PREEMPT=y
 CONFIG_LOG_BUF_SHIFT=18
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_KALLSYMS_ALL=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_PXA=y
-CONFIG_MACH_LITTLETON=y
-CONFIG_MACH_TAVOREVB=y
-CONFIG_MACH_SAAR=y
-CONFIG_PREEMPT=y
+CONFIG_MACH_PXA3XX_DT=y
 CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=64M debug"
 CONFIG_FPE_NWFPE=y
+CONFIG_MODULES=y
+CONFIG_SLAB=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -30,11 +27,11 @@ CONFIG_IP_PNP=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_MTD=y
 CONFIG_MTD_BLOCK=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_NAND_MARVELL=y
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_VERIFY_WRITE=y
 CONFIG_MTD_ONENAND_GENERIC=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_MTD_NAND_MARVELL=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_NETDEVICES=y
@@ -44,12 +41,10 @@ CONFIG_SMC91X=y
 # CONFIG_KEYBOARD_ATKBD is not set
 CONFIG_KEYBOARD_GPIO=y
 CONFIG_KEYBOARD_PXA27x=y
-CONFIG_KEYBOARD_PXA930_ROTARY=y
-CONFIG_MOUSE_PXA930_TRKBALL=y
 CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 # CONFIG_I2C_HELPER_AUTO is not set
@@ -60,7 +55,6 @@ CONFIG_GPIO_MAX732X=y
 CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCF857X=y
 CONFIG_GPIO_MAX7301=y
-CONFIG_POWER_SUPPLY=y
 CONFIG_POWER_SUPPLY_DEBUG=y
 CONFIG_PDA_POWER=y
 CONFIG_BATTERY_DA9030=y
@@ -78,8 +72,6 @@ CONFIG_BACKLIGHT_DA903X=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_FONTS=y
-CONFIG_FONT_6x11=y
 CONFIG_LOGO=y
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
@@ -105,9 +97,11 @@ CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS=y
+CONFIG_FONTS=y
+CONFIG_FONT_6x11=y
 CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
 # CONFIG_SCHED_DEBUG is not set
diff --git a/arch/arm/configs/pxa910_defconfig b/arch/arm/configs/pxa910_defconfig
index b21196372158..353008de5678 100644
--- a/arch/arm/configs/pxa910_defconfig
+++ b/arch/arm/configs/pxa910_defconfig
@@ -1,23 +1,21 @@
 CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
+CONFIG_ARCH_MMP=y
+CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M earlyprintk"
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_MMP=y
 CONFIG_MACH_TAVOREVB=y
 CONFIG_MACH_TTC_DKB=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
 CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M earlyprintk"
 CONFIG_FPE_NWFPE=y
+CONFIG_SLAB=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -34,9 +32,12 @@ CONFIG_SMC91X=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
 CONFIG_SPI=y
+# CONFIG_HWMON is not set
 CONFIG_FB=y
 CONFIG_MMP_DISP=y
 CONFIG_MMP_DISP_CONTROLLER=y
@@ -44,9 +45,6 @@ CONFIG_MMP_SPI=y
 CONFIG_MMP_PANEL_TPOHVGA=y
 CONFIG_MMP_FB=y
 CONFIG_LOGO=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
 # CONFIG_VGA_CONSOLE is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_TMPFS=y
@@ -57,14 +55,14 @@ CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
+CONFIG_CRC_CCITT=y
 CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_MAGIC_SYSRQ=y
 # CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
 CONFIG_DEBUG_MMP_UART2=y
 CONFIG_EARLY_PRINTK=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig
index dedaaae3d0d8..d60cc9cc4c21 100644
--- a/arch/arm/configs/pxa_defconfig
+++ b/arch/arm/configs/pxa_defconfig
@@ -1,8 +1,9 @@
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_FHANDLE=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_IKCONFIG=y
@@ -11,82 +12,16 @@ CONFIG_LOG_BUF_SHIFT=13
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
-CONFIG_SLOB=y
 CONFIG_PROFILING=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_LDM_PARTITION=y
-CONFIG_CMDLINE_PARTITION=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_PXA=y
-CONFIG_ARCH_LUBBOCK=y
-CONFIG_MACH_MAINSTONE=y
-CONFIG_MACH_ZYLONITE300=y
-CONFIG_MACH_ZYLONITE320=y
-CONFIG_MACH_LITTLETON=y
-CONFIG_MACH_TAVOREVB=y
-CONFIG_MACH_SAAR=y
-CONFIG_ARCH_PXA_IDP=y
-CONFIG_ARCH_VIPER=y
-CONFIG_MACH_ARCOM_ZEUS=y
-CONFIG_MACH_BALLOON3=y
-CONFIG_MACH_CSB726=y
-CONFIG_CSB726_CSB701=y
-CONFIG_MACH_EXEDA=y
-CONFIG_MACH_CM_X300=y
-CONFIG_MACH_CAPC7117=y
 CONFIG_ARCH_GUMSTIX=y
-CONFIG_MACH_INTELMOTE2=y
-CONFIG_MACH_STARGATE2=y
-CONFIG_MACH_XCEP=y
-CONFIG_TRIZEPS_PXA=y
-CONFIG_MACH_TRIZEPS4WL=y
-CONFIG_MACH_LOGICPD_PXA270=y
-CONFIG_MACH_PCM027=y
-CONFIG_MACH_PCM990_BASEBOARD=y
-CONFIG_MACH_COLIBRI=y
-CONFIG_MACH_COLIBRI_PXA270_INCOME=y
-CONFIG_MACH_COLIBRI300=y
-CONFIG_MACH_COLIBRI320=y
-CONFIG_MACH_COLIBRI_EVALBOARD=y
-CONFIG_MACH_VPAC270=y
-CONFIG_MACH_H4700=y
-CONFIG_MACH_H5000=y
-CONFIG_MACH_HIMALAYA=y
-CONFIG_MACH_MAGICIAN=y
-CONFIG_MACH_MIOA701=y
-CONFIG_PXA_EZX=y
-CONFIG_MACH_MP900C=y
-CONFIG_ARCH_PXA_PALM=y
 CONFIG_PXA_SHARPSL=y
-CONFIG_MACH_POODLE=y
-CONFIG_MACH_CORGI=y
-CONFIG_MACH_SHEPHERD=y
-CONFIG_MACH_HUSKY=y
 CONFIG_MACH_AKITA=y
 CONFIG_MACH_BORZOI=y
-CONFIG_MACH_TOSA=y
-CONFIG_TOSA_BT=m
-CONFIG_TOSA_USE_EXT_KEYCODES=y
-CONFIG_MACH_ICONTROL=y
-CONFIG_ARCH_PXA_ESERIES=y
-CONFIG_MACH_ZIPIT2=y
-CONFIG_PCI=y
-CONFIG_PCI_MSI=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCCARD=m
-CONFIG_YENTA=m
-CONFIG_PCMCIA_PXA2XX=m
-CONFIG_PREEMPT=y
+CONFIG_PXA_SYSTEMS_CPLDS=y
 CONFIG_AEABI=y
-# CONFIG_COMPACTION is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARCH_FORCE_MAX_ORDER=9
 CONFIG_CMDLINE="root=/dev/ram0 ro"
 CONFIG_KEXEC=y
 CONFIG_CPU_FREQ=y
@@ -99,7 +34,23 @@ CONFIG_CPUFREQ_DT=m
 CONFIG_ARM_PXA2xx_CPUFREQ=m
 CONFIG_CPU_IDLE=y
 CONFIG_ARM_CPUIDLE=y
+CONFIG_CRYPTO_SHA1_ARM=m
+CONFIG_CRYPTO_SHA256_ARM=m
+CONFIG_CRYPTO_SHA512_ARM=m
+CONFIG_CRYPTO_AES_ARM=m
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_LDM_PARTITION=y
+CONFIG_CMDLINE_PARTITION=y
 CONFIG_BINFMT_MISC=y
+CONFIG_SLOB=y
+# CONFIG_COMPACTION is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -117,16 +68,6 @@ CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
 CONFIG_IEEE802154=y
 CONFIG_DNS_RESOLVER=y
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-CONFIG_IRDA_ULTRA=y
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-CONFIG_IRDA_DEBUG=y
-CONFIG_IRTTY_SIR=m
-CONFIG_PXA_FICP=m
 CONFIG_BT=m
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
@@ -153,51 +94,60 @@ CONFIG_MAC80211=m
 CONFIG_RFKILL=y
 CONFIG_RFKILL_INPUT=y
 CONFIG_RFKILL_GPIO=m
+CONFIG_PCI=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCI_MSI=y
+CONFIG_PCCARD=m
+CONFIG_YENTA=m
+CONFIG_PCMCIA_PXA2XX=m
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_CONNECTOR=y
+CONFIG_MTD=y
+CONFIG_MTD_AR7_PARTS=m
+CONFIG_MTD_CMDLINE_PARTS=m
+CONFIG_MTD_OF_PARTS=m
+CONFIG_MTD_AFS_PARTS=m
 CONFIG_MTD_REDBOOT_PARTS=m
 CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=0
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
 CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-CONFIG_MTD_CMDLINE_PARTS=m
-CONFIG_MTD_AFS_PARTS=m
-CONFIG_MTD_OF_PARTS=m
-CONFIG_MTD_AR7_PARTS=m
 CONFIG_MTD_BLOCK=m
 CONFIG_NFTL=m
 CONFIG_NFTL_RW=y
+CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=m
 CONFIG_MTD_CFI_ADV_OPTIONS=y
 CONFIG_MTD_CFI_LE_BYTE_SWAP=y
 CONFIG_MTD_CFI_GEOMETRY=y
 CONFIG_MTD_OTP=y
+CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=m
 CONFIG_MTD_CFI_STAA=m
 CONFIG_MTD_RAM=m
 CONFIG_MTD_ROM=m
 CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PXA2XX=m
 CONFIG_MTD_M25P80=m
 CONFIG_MTD_BLOCK2MTD=y
 CONFIG_MTD_DOCG3=m
+CONFIG_MTD_ONENAND=m
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=m
 CONFIG_MTD_RAW_NAND=m
-CONFIG_MTD_NAND_ECC_SW_BCH=y
+CONFIG_MTD_NAND_SHARPSL=m
+CONFIG_MTD_NAND_TMIO=m
+CONFIG_MTD_NAND_BRCMNAND=m
 CONFIG_MTD_NAND_GPIO=m
+CONFIG_MTD_NAND_PLATFORM=m
 CONFIG_MTD_NAND_DISKONCHIP=m
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
 CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
-CONFIG_MTD_NAND_SHARPSL=m
-CONFIG_MTD_NAND_MARVELL=m
 CONFIG_MTD_NAND_CM_X270=m
-CONFIG_MTD_NAND_TMIO=m
-CONFIG_MTD_NAND_BRCMNAND=m
-CONFIG_MTD_NAND_PLATFORM=m
-CONFIG_MTD_ONENAND=m
-CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-CONFIG_MTD_ONENAND_GENERIC=m
+CONFIG_MTD_NAND_ECC_SW_BCH=y
 CONFIG_MTD_SPI_NOR=m
 CONFIG_MTD_UBI=m
 CONFIG_MTD_UBI_BLOCK=y
@@ -211,8 +161,6 @@ CONFIG_AD525X_DPOT_I2C=m
 CONFIG_ICS932S401=m
 CONFIG_APDS9802ALS=m
 CONFIG_ISL29003=m
-CONFIG_IIO=m
-CONFIG_AD5446=m
 CONFIG_EEPROM_AT24=m
 CONFIG_SENSORS_LIS3_SPI=m
 CONFIG_SCSI=y
@@ -243,13 +191,13 @@ CONFIG_SMC91X=m
 CONFIG_SMSC911X=m
 CONFIG_STMMAC_ETH=m
 CONFIG_PHYLIB=y
-CONFIG_AT803X_PHY=m
-CONFIG_MARVELL_PHY=m
 CONFIG_SMSC_PHY=m
 CONFIG_BROADCOM_PHY=y
 CONFIG_ICPLUS_PHY=m
 CONFIG_MICREL_PHY=m
 CONFIG_FIXED_PHY=m
+CONFIG_MARVELL_PHY=m
+CONFIG_AT803X_PHY=m
 CONFIG_MDIO_BITBANG=y
 CONFIG_PPP=m
 CONFIG_PPP_BSDCOMP=m
@@ -273,16 +221,16 @@ CONFIG_HOSTAP=m
 CONFIG_HOSTAP_FIRMWARE=y
 CONFIG_HOSTAP_FIRMWARE_NVRAM=y
 CONFIG_HOSTAP_CS=m
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_SDIO=m
 CONFIG_HERMES=m
 CONFIG_PCMCIA_HERMES=m
 CONFIG_PCMCIA_SPECTRUM=m
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
 CONFIG_RT2X00=m
 CONFIG_RT73USB=m
 CONFIG_RT2800USB=m
-CONFIG_MWIFIEX=m
-CONFIG_MWIFIEX_SDIO=m
 CONFIG_INPUT_FF_MEMLESS=m
 CONFIG_INPUT_MATRIXKMAP=y
 CONFIG_INPUT_MOUSEDEV=m
@@ -295,14 +243,12 @@ CONFIG_KEYBOARD_ATKBD=m
 CONFIG_KEYBOARD_QT1070=m
 CONFIG_KEYBOARD_GPIO=m
 CONFIG_KEYBOARD_PXA27x=m
-CONFIG_KEYBOARD_PXA930_ROTARY=m
 CONFIG_KEYBOARD_CROS_EC=m
 CONFIG_MOUSE_PS2=m
 CONFIG_MOUSE_PS2_ELANTECH=y
 CONFIG_MOUSE_SERIAL=m
 CONFIG_MOUSE_CYAPA=m
 CONFIG_MOUSE_ELAN_I2C=m
-CONFIG_MOUSE_PXA930_TRKBALL=m
 CONFIG_MOUSE_NAVPOINT_PXA27x=m
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=m
@@ -313,12 +259,9 @@ CONFIG_TOUCHSCREEN_FUJITSU=m
 CONFIG_TOUCHSCREEN_ELO=m
 CONFIG_TOUCHSCREEN_MTOUCH=m
 CONFIG_TOUCHSCREEN_INEXIO=m
-CONFIG_TOUCHSCREEN_HTCPEN=m
 CONFIG_TOUCHSCREEN_PENMOUNT=m
 CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
 CONFIG_TOUCHSCREEN_TOUCHWIN=m
-CONFIG_TOUCHSCREEN_UCB1400=m
-CONFIG_TOUCHSCREEN_WM97XX=m
 CONFIG_TOUCHSCREEN_TOUCHIT213=m
 CONFIG_TOUCHSCREEN_PCAP=m
 CONFIG_TOUCHSCREEN_ST1232=m
@@ -329,7 +272,6 @@ CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
 CONFIG_INPUT_PCAP=m
 CONFIG_INPUT_ADXL34X=m
 CONFIG_SERIO=m
-CONFIG_SERIO_SA1111=m
 CONFIG_LEGACY_PTY_COUNT=8
 CONFIG_SERIAL_8250=m
 CONFIG_SERIAL_8250_CS=m
@@ -342,6 +284,7 @@ CONFIG_I2C_CHARDEV=m
 CONFIG_I2C_MUX_PCA954x=m
 CONFIG_I2C_MUX_PINCTRL=m
 CONFIG_I2C_DESIGNWARE_PLATFORM=m
+CONFIG_I2C_GPIO=y
 CONFIG_I2C_PXA_SLAVE=y
 CONFIG_I2C_XILINX=m
 CONFIG_I2C_CROS_EC_TUNNEL=m
@@ -355,16 +298,17 @@ CONFIG_SPI_XILINX=m
 CONFIG_SPI_SPIDEV=m
 CONFIG_PPS=y
 CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_DWAPB=m
 CONFIG_GPIO_GENERIC_PLATFORM=m
 CONFIG_GPIO_MAX732X=m
 CONFIG_GPIO_PCA953X=m
 CONFIG_GPIO_PCF857X=m
+CONFIG_HTC_EGPIO=y
 CONFIG_GPIO_PALMAS=y
 CONFIG_GPIO_TPS6586X=y
 CONFIG_GPIO_TPS65910=y
 CONFIG_GPIO_MAX7301=m
-CONFIG_GPIO_SYSFS=y
 CONFIG_POWER_SUPPLY_DEBUG=y
 CONFIG_PDA_POWER=m
 CONFIG_BATTERY_SBS=m
@@ -388,13 +332,8 @@ CONFIG_MFD_AS3711=y
 CONFIG_MFD_BCM590XX=m
 CONFIG_MFD_AXP20X=y
 CONFIG_MFD_CROS_EC_DEV=m
-CONFIG_CHROME_PLATFORMS=y
-CONFIG_CROS_EC=m
-CONFIG_CROS_EC_I2C=m
-CONFIG_CROS_EC_SPI=m
 CONFIG_MFD_ASIC3=y
 CONFIG_PMIC_DA903X=y
-CONFIG_HTC_EGPIO=y
 CONFIG_HTC_PASIC3=m
 CONFIG_MFD_MAX14577=y
 CONFIG_MFD_MAX77693=y
@@ -442,11 +381,13 @@ CONFIG_VIDEO_V4L2_SUBDEV_API=y
 CONFIG_MEDIA_USB_SUPPORT=y
 CONFIG_USB_VIDEO_CLASS=m
 CONFIG_V4L_PLATFORM_DRIVERS=y
-CONFIG_VIDEO_PXA27x=m
 CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_PXA27x=m
 CONFIG_DRM=m
+CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_TILEBLITTING=y
+CONFIG_FB_PXA=y
 CONFIG_FB_PXA_OVERLAY=y
 CONFIG_FB_PXA_PARAMETERS=y
 CONFIG_PXA3XX_GCU=m
@@ -463,32 +404,20 @@ CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_LOGO=y
 CONFIG_SOUND=m
 CONFIG_SND=m
-CONFIG_SND_SEQUENCER=m
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
 CONFIG_SND_DYNAMIC_MINORS=y
 CONFIG_SND_VERBOSE_PRINTK=y
 CONFIG_SND_DEBUG=y
+CONFIG_SND_SEQUENCER=m
 CONFIG_SND_USB_AUDIO=m
 CONFIG_SND_SOC=m
 CONFIG_SND_ATMEL_SOC=m
 CONFIG_SND_PXA2XX_SOC=m
-CONFIG_SND_PXA2XX_SOC_CORGI=m
+CONFIG_SND_PXA_SOC_SSP=m
 CONFIG_SND_PXA2XX_SOC_SPITZ=m
-CONFIG_SND_PXA2XX_SOC_Z2=m
-CONFIG_SND_PXA2XX_SOC_POODLE=m
-CONFIG_SND_PXA2XX_SOC_TOSA=m
-CONFIG_SND_PXA2XX_SOC_E740=m
-CONFIG_SND_PXA2XX_SOC_E750=m
-CONFIG_SND_PXA2XX_SOC_E800=m
-CONFIG_SND_PXA2XX_SOC_EM_X270=m
-CONFIG_SND_PXA2XX_SOC_PALM27X=y
-CONFIG_SND_SOC_ZYLONITE=m
-CONFIG_SND_PXA2XX_SOC_HX4700=m
-CONFIG_SND_PXA2XX_SOC_MAGICIAN=m
-CONFIG_SND_PXA2XX_SOC_MIOA701=m
-CONFIG_SND_PXA2XX_SOC_IMOTE2=m
 CONFIG_SND_SOC_AK4642=m
+CONFIG_SND_SOC_WM8731_I2C=m
 CONFIG_SND_SOC_WM8978=m
 CONFIG_SND_SIMPLE_CARD=m
 CONFIG_SOUND_PRIME=m
@@ -577,6 +506,7 @@ CONFIG_USB_LCD=m
 CONFIG_USB_CYTHERM=m
 CONFIG_USB_IDMOUSE=m
 CONFIG_USB_GPIO_VBUS=y
+CONFIG_USB_GPIO_VBUS=m
 CONFIG_USB_ISP1301=m
 CONFIG_USB_GADGET=m
 CONFIG_USB_GADGET_VBUS_DRAW=500
@@ -623,9 +553,9 @@ CONFIG_RTC_DRV_DS1307=m
 CONFIG_RTC_DRV_MAX8907=m
 CONFIG_RTC_DRV_RS5C372=m
 CONFIG_RTC_DRV_ISL1208=m
-CONFIG_RTC_DRV_PALMAS=m
 CONFIG_RTC_DRV_PCF8563=m
 CONFIG_RTC_DRV_PCF8583=m
+CONFIG_RTC_DRV_PALMAS=m
 CONFIG_RTC_DRV_TPS6586X=m
 CONFIG_RTC_DRV_TPS65910=m
 CONFIG_RTC_DRV_S35390A=m
@@ -640,10 +570,16 @@ CONFIG_PXA_DMA=y
 CONFIG_DW_DMAC=m
 CONFIG_UIO=y
 CONFIG_CROS_EC_CHARDEV=m
+CONFIG_CHROME_PLATFORMS=y
+CONFIG_CROS_EC=m
+CONFIG_CROS_EC_I2C=m
+CONFIG_CROS_EC_SPI=m
 CONFIG_COMMON_CLK_S2MPS11=m
 CONFIG_PM_DEVFREQ=y
 CONFIG_EXTCON=y
 CONFIG_MEMORY=y
+CONFIG_IIO=m
+CONFIG_AD5446=m
 CONFIG_PWM=y
 CONFIG_PWM_PXA=m
 CONFIG_PHY_SAMSUNG_USB2=m
@@ -709,17 +645,7 @@ CONFIG_NLS_ASCII=m
 CONFIG_NLS_ISO8859_1=m
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_UTF8=m
-CONFIG_PRINTK_TIME=y
-CONFIG_DYNAMIC_DEBUG=y
-CONFIG_DEBUG_INFO=y
-CONFIG_FRAME_WARN=0
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_SHIRQ=y
 CONFIG_TIMER_STATS=y
-CONFIG_FUNCTION_TRACER=y
-CONFIG_FTRACE_SYSCALLS=y
-CONFIG_DEBUG_USER=y
 CONFIG_SECURITY=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_CRYPTD=m
@@ -745,11 +671,6 @@ CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_LZO=y
-CONFIG_ARM_CRYPTO=y
-CONFIG_CRYPTO_SHA1_ARM=m
-CONFIG_CRYPTO_SHA256_ARM=m
-CONFIG_CRYPTO_SHA512_ARM=m
-CONFIG_CRYPTO_AES_ARM=m
 CONFIG_CRC_CCITT=y
 CONFIG_CRC_T10DIF=m
 CONFIG_FONTS=y
@@ -757,3 +678,12 @@ CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
 CONFIG_FONT_6x11=y
 CONFIG_FONT_MINI_4x6=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_FRAME_WARN=0
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_FUNCTION_TRACER=y
+CONFIG_FTRACE_SYSCALLS=y
diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig
index 9981566f2096..7d8b6884fd00 100644
--- a/arch/arm/configs/qcom_defconfig
+++ b/arch/arm/configs/qcom_defconfig
@@ -1,39 +1,38 @@
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARCH_QCOM=y
 CONFIG_ARCH_MSM8X60=y
 CONFIG_ARCH_MSM8960=y
 CONFIG_ARCH_MSM8974=y
 CONFIG_ARCH_MDM9615=y
-CONFIG_PCI=y
-CONFIG_PCI_MSI=y
-CONFIG_PCIE_QCOM=y
 CONFIG_SMP=y
-CONFIG_PREEMPT=y
+CONFIG_ARM_PSCI=y
 CONFIG_HIGHMEM=y
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPUFREQ_DT=y
 CONFIG_CPU_IDLE=y
 CONFIG_ARM_CPUIDLE=y
 CONFIG_VFP=y
 CONFIG_NEON=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_PARTITION_ADVANCED=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_COMPAT_BRK is not set
 CONFIG_CMA=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -56,15 +55,18 @@ CONFIG_BT_HCIUART_BCM=y
 CONFIG_CFG80211=m
 CONFIG_MAC80211=m
 CONFIG_RFKILL=y
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCIE_QCOM=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
+CONFIG_MTD_QCOMSMEM_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_M25P80=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_QCOM=y
 CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_QCOMSMEM_PARTS=y
 CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
@@ -133,10 +135,10 @@ CONFIG_PINCTRL_MSM8660=y
 CONFIG_PINCTRL_MSM8960=y
 CONFIG_PINCTRL_MDM9615=y
 CONFIG_PINCTRL_MSM8X74=y
-CONFIG_PINCTRL_SDX55=y
 CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
 CONFIG_PINCTRL_QCOM_SSBI_PMIC=y
 CONFIG_GPIOLIB=y
+CONFIG_PINCTRL_SDX55=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_MSM=y
@@ -144,15 +146,17 @@ CONFIG_CHARGER_QCOM_SMBB=y
 CONFIG_CHARGER_BQ24190=m
 CONFIG_THERMAL=y
 CONFIG_QCOM_TSENS=y
+CONFIG_WATCHDOG=y
+CONFIG_QCOM_WDT=y
 CONFIG_MFD_PM8XXX=y
 CONFIG_MFD_QCOM_RPM=y
 CONFIG_MFD_SPMI_PMIC=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_QCOM_RPM=y
+CONFIG_REGULATOR_QCOM_RPMH=y
 CONFIG_REGULATOR_QCOM_SMD_RPM=y
 CONFIG_REGULATOR_QCOM_SPMI=y
-CONFIG_REGULATOR_QCOM_RPMH=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_DRM=y
 CONFIG_DRM_MSM=m
@@ -160,11 +164,11 @@ CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_DRM_PANEL_EDP=y
 CONFIG_DRM_ANALOGIX_ANX78XX=m
 CONFIG_FB=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_LM3630A=y
 CONFIG_BACKLIGHT_LP855X=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_DYNAMIC_MINORS=y
@@ -180,6 +184,7 @@ CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_MSM=y
 CONFIG_USB_ACM=y
+CONFIG_USB_DWC3=y
 CONFIG_USB_CHIPIDEA=y
 CONFIG_USB_CHIPIDEA_UDC=y
 CONFIG_USB_CHIPIDEA_HOST=y
@@ -196,7 +201,6 @@ CONFIG_USB_CONFIGFS_ECM=y
 CONFIG_USB_CONFIGFS_F_FS=y
 CONFIG_USB_ULPI_BUS=y
 CONFIG_USB_ETH=m
-CONFIG_USB_DWC3=y
 CONFIG_MMC=y
 CONFIG_MMC_BLOCK_MINORS=32
 CONFIG_MMC_ARMMMCI=y
@@ -218,8 +222,8 @@ CONFIG_COMMON_CLK_QCOM=y
 CONFIG_QCOM_A7PLL=y
 CONFIG_QCOM_CLK_APCS_SDX55=y
 CONFIG_QCOM_CLK_RPM=y
-CONFIG_QCOM_CLK_RPMH=y
 CONFIG_QCOM_CLK_SMD_RPM=y
+CONFIG_QCOM_CLK_RPMH=y
 CONFIG_APQ_MMCC_8084=y
 CONFIG_IPQ_GCC_4019=y
 CONFIG_IPQ_LCC_806X=y
@@ -229,30 +233,35 @@ CONFIG_MDM_LCC_9615=y
 CONFIG_MSM_MMCC_8960=y
 CONFIG_MSM_MMCC_8974=y
 CONFIG_SDX_GCC_55=y
-CONFIG_MSM_IOMMU=y
-CONFIG_ARM_SMMU=y
 CONFIG_HWSPINLOCK=y
 CONFIG_HWSPINLOCK_QCOM=y
 CONFIG_MAILBOX=y
 CONFIG_QCOM_APCS_IPC=y
+CONFIG_MSM_IOMMU=y
+CONFIG_ARM_SMMU=y
 CONFIG_REMOTEPROC=y
 CONFIG_QCOM_ADSP_PIL=y
 CONFIG_QCOM_Q6V5_PAS=y
 CONFIG_QCOM_Q6V5_PIL=y
 CONFIG_QCOM_WCNSS_PIL=y
 CONFIG_RPMSG_CHAR=y
+CONFIG_RPMSG_CTRL=y
 CONFIG_RPMSG_QCOM_GLINK_SMEM=y
 CONFIG_RPMSG_QCOM_SMD=y
 CONFIG_QCOM_COMMAND_DB=y
 CONFIG_QCOM_GSBI=y
 CONFIG_QCOM_OCMEM=y
 CONFIG_QCOM_PM=y
+CONFIG_QCOM_RPMH=y
+CONFIG_QCOM_RPMHPD=y
+CONFIG_QCOM_RMTFS_MEM=y
+CONFIG_QCOM_RPMPD=y
 CONFIG_QCOM_SMEM=y
 CONFIG_QCOM_SMD_RPM=y
 CONFIG_QCOM_SMP2P=y
 CONFIG_QCOM_SMSM=y
-CONFIG_QCOM_RPMH=y
-CONFIG_QCOM_RPMHPD=y
+CONFIG_QCOM_SOCINFO=y
+CONFIG_QCOM_STATS=y
 CONFIG_QCOM_WCNSS_CTRL=y
 CONFIG_EXTCON_QCOM_SPMI_MISC=y
 CONFIG_IIO=y
@@ -270,11 +279,11 @@ CONFIG_BMP280=y
 CONFIG_PWM=y
 CONFIG_PHY_QCOM_APQ8064_SATA=y
 CONFIG_PHY_QCOM_IPQ806X_SATA=y
-CONFIG_PHY_QCOM_USB_HS=y
-CONFIG_PHY_QCOM_USB_HSIC=y
 CONFIG_PHY_QCOM_QMP=y
+CONFIG_PHY_QCOM_USB_HS=y
 CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=y
-CONFIG_QCOM_QFPROM=y
+CONFIG_PHY_QCOM_USB_HSIC=y
+CONFIG_NVMEM_QCOM_QFPROM=y
 CONFIG_INTERCONNECT=y
 CONFIG_INTERCONNECT_QCOM=y
 CONFIG_INTERCONNECT_QCOM_MSM8974=m
@@ -295,15 +304,19 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
+CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_USER_API=m
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_CRYPTO_USER_API_RNG=m
+CONFIG_CRYPTO_USER_API_AEAD=m
+CONFIG_CRYPTO_DEV_QCOM_RNG=m
 CONFIG_DMA_CMA=y
 CONFIG_CMA_SIZE_MBYTES=64
 CONFIG_PRINTK_TIME=y
 CONFIG_DYNAMIC_DEBUG=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+# CONFIG_SLUB_DEBUG is not set
 # CONFIG_SCHED_DEBUG is not set
-CONFIG_WATCHDOG=y
-CONFIG_QCOM_WDT=y
-CONFIG_ARM_PSCI=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPUFREQ_DT=y
diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig
index 3ef3521c19db..92f803c2805c 100644
--- a/arch/arm/configs/realview_defconfig
+++ b/arch/arm/configs/realview_defconfig
@@ -1,10 +1,8 @@
-# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_NO_HZ_FULL=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_PERF_EVENTS=y
-CONFIG_SLAB=y
 CONFIG_ARCH_MULTI_V6=y
 CONFIG_ARCH_REALVIEW=y
 CONFIG_MACH_REALVIEW_EB=y
@@ -21,7 +19,8 @@ CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=tt
 CONFIG_VFP=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_SWAP is not set
+CONFIG_SLAB=y
 CONFIG_CMA=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -43,6 +42,7 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
 CONFIG_NETDEVICES=y
 CONFIG_SMC91X=y
 CONFIG_SMSC911X=y
@@ -95,9 +95,9 @@ CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/rpc_defconfig b/arch/arm/configs/rpc_defconfig
index c090643b1ecb..210974364d61 100644
--- a/arch/arm/configs/rpc_defconfig
+++ b/arch/arm/configs/rpc_defconfig
@@ -2,16 +2,16 @@
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_MULTI_V4=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_RPC=y
 CONFIG_CPU_SA110=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_SLAB=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -33,6 +33,7 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
 CONFIG_BLK_DEV_SR=y
 CONFIG_CHR_DEV_SG=y
+# CONFIG_BLK_DEV_BSG is not set
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_ARXESCSI=m
@@ -55,12 +56,12 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_MOUSE_PS2 is not set
 CONFIG_MOUSE_RISCPC=y
 # CONFIG_SERIO_SERPORT is not set
+CONFIG_LEGACY_PTY_COUNT=64
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=16
 CONFIG_SERIAL_8250_RUNTIME_UARTS=8
 CONFIG_SERIAL_8250_ACORN=y
-CONFIG_LEGACY_PTY_COUNT=64
 CONFIG_PRINTER=m
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
@@ -69,9 +70,6 @@ CONFIG_I2C_CHARDEV=y
 CONFIG_FB=y
 CONFIG_FB_ACORN=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x16=y
-CONFIG_FONT_ACORN_8x8=y
 CONFIG_LOGO=y
 CONFIG_SOUND=m
 CONFIG_SOUND_PRIME=m
@@ -89,10 +87,8 @@ CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
 CONFIG_ADFS_FS=y
 CONFIG_NFS_FS=y
-CONFIG_PARTITION_ADVANCED=y
 # CONFIG_ACORN_PARTITION_CUMANA is not set
 # CONFIG_ACORN_PARTITION_EESOX is not set
-CONFIG_BSD_DISKLABEL=y
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -120,8 +116,11 @@ CONFIG_NLS_ISO8859_6=m
 CONFIG_NLS_ISO8859_7=m
 CONFIG_NLS_ISO8859_9=m
 CONFIG_NLS_KOI8_R=m
-CONFIG_MAGIC_SYSRQ=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x16=y
+CONFIG_FONT_ACORN_8x8=y
 CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
 CONFIG_DEBUG_LL_UART_8250=y
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 153009130dab..41b40863a78e 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -3,7 +3,9 @@ CONFIG_IKCONFIG=m
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
+CONFIG_ARCH_MULTI_V4T=y
+CONFIG_ARCH_MULTI_V5=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_S3C24XX=y
 CONFIG_S3C_ADC=y
 CONFIG_CPU_S3C2412=y
@@ -35,18 +37,17 @@ CONFIG_ARCH_S3C2440=y
 CONFIG_MACH_NEO1973_GTA02=y
 CONFIG_MACH_RX1950=y
 CONFIG_MACH_SMDK2443=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0"
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
 CONFIG_APM_EMULATION=m
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_BSD_DISKLABEL=y
 CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_SLAB=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -203,6 +204,7 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
 CONFIG_BLK_DEV_SR=y
 CONFIG_CHR_DEV_SG=y
+# CONFIG_BLK_DEV_BSG is not set
 CONFIG_CHR_DEV_SCH=m
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SCAN_ASYNC=y
@@ -249,7 +251,6 @@ CONFIG_INPUT_YEALINK=m
 CONFIG_INPUT_CM109=m
 CONFIG_INPUT_UINPUT=m
 CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
-CONFIG_SERIAL_NONSTANDARD=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=8
@@ -258,6 +259,7 @@ CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_SAMSUNG=y
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_NONSTANDARD=y
 CONFIG_SERIAL_DEV_BUS=m
 CONFIG_PRINTER=y
 CONFIG_PPDEV=y
@@ -358,6 +360,8 @@ CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_S3C=y
 CONFIG_DMADEVICES=y
 CONFIG_S3C24XX_DMAC=y
+CONFIG_PWM=y
+CONFIG_PWM_SAMSUNG=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
@@ -425,9 +429,9 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-CONFIG_DEBUG_INFO=y
-CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_MUTEXES=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig
index 59a258d504aa..93258d5b57ff 100644
--- a/arch/arm/configs/s3c6400_defconfig
+++ b/arch/arm/configs/s3c6400_defconfig
@@ -5,15 +5,6 @@ CONFIG_KALLSYMS_ALL=y
 CONFIG_ARCH_MULTI_V6=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_S3C64XX=y
-CONFIG_MACH_SMDK6400=y
-CONFIG_MACH_ANW6410=y
-CONFIG_MACH_MINI6410=y
-CONFIG_MACH_REAL6410=y
-CONFIG_MACH_SMDK6410=y
-CONFIG_MACH_NCP=y
-CONFIG_MACH_HMT=y
-CONFIG_MACH_SMARTQ5=y
-CONFIG_MACH_SMARTQ7=y
 CONFIG_MACH_WLF_CRAGG_6410=y
 CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/linuxrc initrd=0x51000000,6M ramdisk_size=6144"
 CONFIG_VFP=y
@@ -71,9 +62,9 @@ CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_CRAMFS=y
 CONFIG_ROMFS_FS=y
-CONFIG_DEBUG_INFO=y
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_RT_MUTEXES=y
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
diff --git a/arch/arm/configs/s5pv210_defconfig b/arch/arm/configs/s5pv210_defconfig
index 70919716f815..4c1e480b5bbd 100644
--- a/arch/arm/configs/s5pv210_defconfig
+++ b/arch/arm/configs/s5pv210_defconfig
@@ -1,5 +1,5 @@
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_CGROUPS=y
@@ -21,7 +21,6 @@ CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_BSD_DISKLABEL=y
 CONFIG_SOLARIS_X86_PARTITION=y
@@ -48,6 +47,7 @@ CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_SG=y
+# CONFIG_BLK_DEV_BSG is not set
 CONFIG_NETDEVICES=y
 CONFIG_BRCMFMAC=m
 CONFIG_INPUT_EVDEV=y
@@ -115,9 +115,9 @@ CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
 CONFIG_CRC_CCITT=y
-CONFIG_DEBUG_INFO=y
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_MAGIC_SYSRQ=y
 # CONFIG_DEBUG_PREEMPT is not set
 CONFIG_DEBUG_RT_MUTEXES=y
 CONFIG_DEBUG_SPINLOCK=y
diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig
index 03dd80c2a19e..877bbe7b777e 100644
--- a/arch/arm/configs/sama5_defconfig
+++ b/arch/arm/configs/sama5_defconfig
@@ -1,5 +1,4 @@
 # CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -7,7 +6,6 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
 CONFIG_ARCH_AT91=y
 CONFIG_SOC_SAMA5D2=y
 CONFIG_SOC_SAMA5D3=y
@@ -26,8 +24,9 @@ CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_SWAP is not set
+CONFIG_SLAB=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -44,9 +43,6 @@ CONFIG_BRIDGE_VLAN_FILTERING=y
 CONFIG_NET_DSA=m
 CONFIG_VLAN_8021Q=m
 CONFIG_CAN=y
-CONFIG_CAN_AT91=y
-CONFIG_CAN_M_CAN=y
-CONFIG_CAN_M_CAN_PLATFORM=y
 CONFIG_CFG80211=y
 CONFIG_MAC80211=y
 CONFIG_MAC80211_LEDS=y
@@ -57,13 +53,13 @@ CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
 CONFIG_MTD_TESTS=m
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_ATMEL=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_UBI=y
 CONFIG_MTD_UBI_FASTMAP=y
+CONFIG_MTD_UBI_BLOCK=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=4
@@ -72,6 +68,7 @@ CONFIG_ATMEL_SSC=y
 CONFIG_EEPROM_AT24=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
 CONFIG_NET_DSA_MICROCHIP_KSZ9477=m
@@ -90,6 +87,9 @@ CONFIG_MACB=y
 # CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_MICREL_PHY=y
+CONFIG_CAN_AT91=y
+CONFIG_CAN_M_CAN=y
+CONFIG_CAN_M_CAN_PLATFORM=y
 CONFIG_USB_LAN78XX=m
 CONFIG_LIBERTAS_THINFIRM=m
 CONFIG_LIBERTAS_THINFIRM_USB=m
@@ -152,11 +152,11 @@ CONFIG_USB_VIDEO_CLASS=m
 CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_VIDEO_ATMEL_ISC=y
 CONFIG_VIDEO_ATMEL_ISI=y
+CONFIG_VIDEO_MT9V032=m
 CONFIG_VIDEO_OV2640=m
 CONFIG_VIDEO_OV5640=m
 CONFIG_VIDEO_OV7670=m
 CONFIG_VIDEO_OV7740=m
-CONFIG_VIDEO_MT9V032=m
 CONFIG_DRM=y
 CONFIG_DRM_ATMEL_HLCDC=y
 CONFIG_DRM_PANEL_SIMPLE=y
@@ -222,6 +222,7 @@ CONFIG_PWM_ATMEL_HLCDC_PWM=y
 CONFIG_PWM_ATMEL_TCB=y
 CONFIG_EXT4_FS=y
 CONFIG_FANOTIFY=y
+CONFIG_AUTOFS_FS=m
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_UBIFS_FS=y
diff --git a/arch/arm/configs/sama7_defconfig b/arch/arm/configs/sama7_defconfig
index 0368068e04d9..8f28c9d443f0 100644
--- a/arch/arm/configs/sama7_defconfig
+++ b/arch/arm/configs/sama7_defconfig
@@ -1,5 +1,4 @@
 # CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -14,18 +13,23 @@ CONFIG_BLK_DEV_INITRD=y
 # CONFIG_IO_URING is not set
 CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
-# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
 CONFIG_ARCH_AT91=y
 CONFIG_SOC_SAMA7G5=y
 CONFIG_ATMEL_CLOCKSOURCE_TCB=y
 # CONFIG_CACHE_L2X0 is not set
 # CONFIG_ARM_PATCH_IDIV is not set
 # CONFIG_CPU_SW_DOMAIN_PAN is not set
-CONFIG_FORCE_MAX_ZONEORDER=15
+CONFIG_ARCH_FORCE_MAX_ORDER=15
 CONFIG_UACCESS_WITH_MEMCPY=y
 # CONFIG_ATAGS is not set
 CONFIG_CMDLINE="console=ttyS0,115200 earlyprintk ignore_loglevel"
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPUFREQ_DT=y
+CONFIG_CPU_IDLE=y
 CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_KERNEL_MODE_NEON=y
@@ -36,8 +40,11 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_COREDUMP is not set
+# CONFIG_SWAP is not set
+CONFIG_SLAB=y
 # CONFIG_COMPACTION is not set
 CONFIG_CMA=y
+# CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -52,8 +59,6 @@ CONFIG_BRIDGE_VLAN_FILTERING=y
 CONFIG_NET_DSA=m
 CONFIG_VLAN_8021Q=m
 CONFIG_CAN=y
-CONFIG_CAN_M_CAN=y
-CONFIG_CAN_M_CAN_PLATFORM=y
 CONFIG_BT=y
 CONFIG_BT_RFCOMM=y
 CONFIG_BT_RFCOMM_TTY=y
@@ -82,7 +87,13 @@ CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
 CONFIG_MTD_TESTS=m
 CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+# CONFIG_MTD_NAND_ECC_SW_HAMMING is not set
 CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_FASTMAP=y
+CONFIG_MTD_UBI_BLOCK=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=1
@@ -94,6 +105,8 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y
 CONFIG_MACB=y
 CONFIG_MICREL_PHY=y
+CONFIG_CAN_M_CAN=y
+CONFIG_CAN_M_CAN_PLATFORM=y
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
@@ -127,6 +140,8 @@ CONFIG_MEDIA_SUPPORT_FILTER=y
 CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_MEDIA_PLATFORM_SUPPORT=y
 CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_VIDEO_ATMEL_XISC=y
+CONFIG_VIDEO_MICROCHIP_CSI2DC=y
 CONFIG_VIDEO_IMX219=m
 CONFIG_VIDEO_IMX274=m
 CONFIG_VIDEO_OV5647=m
@@ -138,6 +153,8 @@ CONFIG_SND_SOC_MIKROE_PROTO=m
 CONFIG_SND_MCHP_SOC_I2S_MCC=y
 CONFIG_SND_MCHP_SOC_SPDIFTX=y
 CONFIG_SND_MCHP_SOC_SPDIFRX=y
+CONFIG_SND_MCHP_SOC_PDMC=y
+CONFIG_SND_SOC_DMIC=y
 CONFIG_SND_SOC_PCM5102A=y
 CONFIG_SND_SOC_SPDIF=y
 CONFIG_SND_SIMPLE_CARD=y
@@ -170,21 +187,22 @@ CONFIG_RTC_DRV_AT91RM9200=y
 CONFIG_RTC_DRV_AT91SAM9=y
 CONFIG_DMADEVICES=y
 CONFIG_AT_XDMAC=y
-CONFIG_DMATEST=y
 CONFIG_STAGING=y
-CONFIG_MICROCHIP_PIT64B=y
 # CONFIG_IOMMU_SUPPORT is not set
-# CONFIG_ATMEL_EBI is not set
 CONFIG_IIO=y
 CONFIG_IIO_SW_TRIGGER=y
 CONFIG_AT91_SAMA5D2_ADC=y
 CONFIG_PWM=y
 CONFIG_PWM_ATMEL=y
+CONFIG_MCHP_EIC=y
+CONFIG_RESET_CONTROLLER=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 CONFIG_FANOTIFY=y
+CONFIG_AUTOFS_FS=m
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
+CONFIG_UBIFS_FS=y
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
@@ -192,17 +210,27 @@ CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
 CONFIG_LSM="N"
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
-# CONFIG_CRYPTO_HW is not set
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CFB=y
+CONFIG_CRYPTO_OFB=y
+CONFIG_CRYPTO_XTS=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_CRYPTO_DEV_ATMEL_AES=y
+CONFIG_CRYPTO_DEV_ATMEL_TDES=y
+CONFIG_CRYPTO_DEV_ATMEL_SHA=y
 CONFIG_CRC_CCITT=y
 CONFIG_CRC_ITU_T=y
 CONFIG_DMA_CMA=y
 CONFIG_CMA_SIZE_MBYTES=32
 CONFIG_CMA_ALIGNMENT=9
+# CONFIG_DEBUG_MISC is not set
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_DEBUG_MISC is not set
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_STACKTRACE=y
 # CONFIG_FTRACE is not set
diff --git a/arch/arm/configs/shannon_defconfig b/arch/arm/configs/shannon_defconfig
index de33abdeb6fa..dfcea70b8034 100644
--- a/arch/arm/configs/shannon_defconfig
+++ b/arch/arm/configs/shannon_defconfig
@@ -1,20 +1,22 @@
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
+CONFIG_ARCH_MULTI_V4=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_SA1100=y
 CONFIG_SA1100_SHANNON=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_SA1100=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="console=ttySA0,9600 console=tty1 root=/dev/mtdblock2 init=/linuxrc"
 CONFIG_FPE_NWFPE=y
+CONFIG_MODULES=y
+CONFIG_PARTITION_ADVANCED=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
 # CONFIG_IPV6 is not set
+CONFIG_PCCARD=y
+CONFIG_PCMCIA_SA1100=y
 CONFIG_MTD=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
@@ -40,5 +42,4 @@ CONFIG_VFAT_FS=y
 CONFIG_JFFS2_FS=y
 CONFIG_MINIX_FS=y
 CONFIG_NFS_FS=y
-CONFIG_PARTITION_ADVANCED=y
 CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig
index 2c2702ec6d02..452aef74cc5c 100644
--- a/arch/arm/configs/shmobile_defconfig
+++ b/arch/arm/configs/shmobile_defconfig
@@ -1,12 +1,11 @@
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_PERF_EVENTS=y
-CONFIG_SLAB=y
 CONFIG_ARCH_RENESAS=y
 CONFIG_PL310_ERRATA_588369=y
 CONFIG_SMP=y
@@ -25,6 +24,7 @@ CONFIG_CPUFREQ_DT=y
 CONFIG_VFP=y
 CONFIG_NEON=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_SLAB=y
 CONFIG_CMA=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -32,8 +32,8 @@ CONFIG_UNIX=y
 CONFIG_INET=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
+CONFIG_NET_DSA=y
 CONFIG_CAN=y
-CONFIG_CAN_RCAR=y
 CONFIG_PCI=y
 CONFIG_PCI_MSI=y
 CONFIG_PCI_RCAR_GEN2=y
@@ -52,11 +52,14 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_ATA=y
 CONFIG_SATA_RCAR=y
 CONFIG_NETDEVICES=y
+CONFIG_NET_DSA_RZN1_A5PSW=y
 CONFIG_SH_ETH=y
 CONFIG_RAVB=y
 CONFIG_SMSC911X=y
+CONFIG_STMMAC_ETH=y
 CONFIG_MICREL_PHY=y
 CONFIG_SMSC_PHY=y
+CONFIG_CAN_RCAR=y
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
@@ -69,9 +72,13 @@ CONFIG_INPUT_DA9063_ONKEY=y
 CONFIG_INPUT_ADXL34X=y
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+# CONFIG_SERIAL_8250_16550A_VARIANTS is not set
 CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
 CONFIG_SERIAL_8250_DW=y
 CONFIG_SERIAL_8250_EM=y
+# CONFIG_SERIAL_8250_PERICOM is not set
 CONFIG_SERIAL_SH_SCI=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_DEMUX_PINCTRL=y
@@ -87,6 +94,7 @@ CONFIG_SPI_SH_MSIOF=y
 CONFIG_SPI_SH_HSPI=y
 CONFIG_PINCTRL_RZA1=y
 CONFIG_PINCTRL_RZA2=y
+CONFIG_PINCTRL_RZN1=y
 CONFIG_GPIO_EM=y
 CONFIG_GPIO_RCAR=y
 CONFIG_GPIO_PCA953X=y
@@ -102,6 +110,7 @@ CONFIG_WATCHDOG=y
 CONFIG_DA9063_WATCHDOG=y
 CONFIG_RENESAS_WDT=y
 CONFIG_RENESAS_RZAWDT=y
+CONFIG_RENESAS_RZN1WDT=y
 CONFIG_MFD_AS3711=y
 CONFIG_MFD_DA9063=y
 CONFIG_MFD_STMPE=y
@@ -115,9 +124,9 @@ CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_MEDIA_PLATFORM_SUPPORT=y
 CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_V4L_MEM2MEM_DRIVERS=y
 CONFIG_VIDEO_RENESAS_CEU=y
 CONFIG_VIDEO_RCAR_VIN=y
-CONFIG_V4L_MEM2MEM_DRIVERS=y
 CONFIG_VIDEO_RENESAS_FDP1=y
 CONFIG_VIDEO_RENESAS_JPU=y
 CONFIG_VIDEO_RENESAS_VSP1=y
@@ -173,7 +182,10 @@ CONFIG_RTC_DRV_S35390A=y
 CONFIG_RTC_DRV_RX8581=y
 CONFIG_RTC_DRV_DA9063=y
 CONFIG_RTC_DRV_SH=y
+CONFIG_RTC_DRV_RZN1=y
 CONFIG_DMADEVICES=y
+CONFIG_DW_DMAC=y
+CONFIG_RZN1_DMAMUX=y
 CONFIG_RCAR_DMAC=y
 CONFIG_RENESAS_USB_DMAC=y
 CONFIG_STAGING=y
@@ -220,5 +232,5 @@ CONFIG_NLS_ISO8859_1=y
 CONFIG_DMA_CMA=y
 CONFIG_CMA_SIZE_MBYTES=64
 CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_FS=y
diff --git a/arch/arm/configs/simpad_defconfig b/arch/arm/configs/simpad_defconfig
index 28d99d8895f9..4e00a4c2c287 100644
--- a/arch/arm/configs/simpad_defconfig
+++ b/arch/arm/configs/simpad_defconfig
@@ -1,20 +1,18 @@
 CONFIG_LOCALVERSION="oe1"
 CONFIG_SYSVIPC=y
+CONFIG_PREEMPT=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_MODULES=y
+CONFIG_ARCH_MULTI_V4=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_SA1100=y
 CONFIG_SA1100_SIMPAD=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_SA1100=y
-CONFIG_PREEMPT=y
-CONFIG_LEDS=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="mtdparts=sa1100:512k(boot),1m(kernel),-(root) console=ttySA0 root=1f02 noinitrd mem=64M jffs2_orphaned_inodes=delete rootfstype=jffs2"
 CONFIG_FPE_NWFPE=y
+CONFIG_MODULES=y
 CONFIG_BINFMT_MISC=m
 CONFIG_PM=y
 CONFIG_NET=y
@@ -25,18 +23,14 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IPV6 is not set
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-CONFIG_IRTTY_SIR=m
-CONFIG_SA1100_FIR=m
 CONFIG_BT=m
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=m
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_PCCARD=y
+CONFIG_PCMCIA_SA1100=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
@@ -56,19 +50,19 @@ CONFIG_DUMMY=y
 CONFIG_NET_ETHERNET=y
 CONFIG_NET_PCI=y
 CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C589=m
 CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_3C589=m
 CONFIG_PCMCIA_PCNET=m
 CONFIG_PCMCIA_SMC91C92=m
 CONFIG_PCMCIA_XIRC2PS=m
 CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_FILTER=y
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOE=m
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=800
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=600
 CONFIG_INPUT_EVDEV=m
@@ -83,6 +77,8 @@ CONFIG_FB=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 CONFIG_SOUND=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
 CONFIG_EXT2_FS=m
 CONFIG_EXT3_FS=m
 CONFIG_REISERFS_FS=m
diff --git a/arch/arm/configs/socfpga_defconfig b/arch/arm/configs/socfpga_defconfig
index 2d9404ea52c6..70739e09d0f4 100644
--- a/arch/arm/configs/socfpga_defconfig
+++ b/arch/arm/configs/socfpga_defconfig
@@ -14,13 +14,10 @@ CONFIG_ARM_THUMBEE=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_HIGHMEM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -36,9 +33,6 @@ CONFIG_NETWORK_PHY_TIMESTAMPING=y
 CONFIG_VLAN_8021Q=y
 CONFIG_VLAN_8021Q_GVRP=y
 CONFIG_CAN=y
-CONFIG_CAN_C_CAN=y
-CONFIG_CAN_C_CAN_PLATFORM=y
-CONFIG_CAN_DEBUG_DEVICES=y
 CONFIG_PCI=y
 CONFIG_PCI_MSI=y
 CONFIG_PCIE_ALTERA=y
@@ -52,7 +46,6 @@ CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_DENALI_DT=y
 CONFIG_MTD_SPI_NOR=y
 # CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
-CONFIG_SPI_CADENCE_QUADSPI=y
 CONFIG_OF_OVERLAY=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
@@ -64,6 +57,7 @@ CONFIG_EEPROM_AT24=y
 CONFIG_SCSI=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
 CONFIG_ALTERA_TSE=m
@@ -73,6 +67,9 @@ CONFIG_IXGBE=m
 CONFIG_STMMAC_ETH=y
 CONFIG_MARVELL_PHY=y
 CONFIG_MICREL_PHY=y
+CONFIG_CAN_C_CAN=y
+CONFIG_CAN_C_CAN_PLATFORM=y
+CONFIG_CAN_DEBUG_DEVICES=y
 CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_STMPE=y
@@ -88,6 +85,7 @@ CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 CONFIG_SPI=y
+CONFIG_SPI_CADENCE_QUADSPI=y
 CONFIG_SPI_DESIGNWARE=y
 CONFIG_SPI_DW_MMIO=y
 CONFIG_SPI_SPIDEV=y
@@ -154,7 +152,7 @@ CONFIG_NFSD_V4=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 CONFIG_DETECT_HUNG_TASK=y
diff --git a/arch/arm/configs/sp7021_defconfig b/arch/arm/configs/sp7021_defconfig
new file mode 100644
index 000000000000..5bca2eb59b86
--- /dev/null
+++ b/arch/arm/configs/sp7021_defconfig
@@ -0,0 +1,59 @@
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_RD_GZIP is not set
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_XZ is not set
+# CONFIG_RD_LZO is not set
+# CONFIG_RD_LZ4 is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_PERF_EVENTS=y
+CONFIG_ARCH_SUNPLUS=y
+# CONFIG_VDSO is not set
+CONFIG_SMP=y
+CONFIG_THUMB2_KERNEL=y
+CONFIG_ARCH_FORCE_MAX_ORDER=12
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_SLAB=y
+CONFIG_UEVENT_HELPER=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_INPUT_SPARSEKMAP=y
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_RESET_CONTROLLER=y
+CONFIG_EXT4_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_FANOTIFY=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
+CONFIG_EXFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/spear13xx_defconfig b/arch/arm/configs/spear13xx_defconfig
index 065553326b39..bfde0c86cdc5 100644
--- a/arch/arm/configs/spear13xx_defconfig
+++ b/arch/arm/configs/spear13xx_defconfig
@@ -1,18 +1,11 @@
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_PARTITION_ADVANCED=y
 CONFIG_PLAT_SPEAR=y
 CONFIG_ARCH_SPEAR13XX=y
 CONFIG_MACH_SPEAR1310=y
 CONFIG_MACH_SPEAR1340=y
 # CONFIG_SWP_EMULATE is not set
-CONFIG_PCI=y
-CONFIG_PCI_MSI=y
-CONFIG_PCIE_SPEAR13XX=y
 CONFIG_SMP=y
 # CONFIG_SMP_ON_UP is not set
 # CONFIG_ARM_CPU_TOPOLOGY is not set
@@ -20,6 +13,10 @@ CONFIG_AEABI=y
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_VFP=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_PARTITION_ADVANCED=y
 CONFIG_BINFMT_MISC=y
 CONFIG_NET=y
 CONFIG_UNIX=y
@@ -28,6 +25,9 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_NET_IPIP=y
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCIE_SPEAR13XX=y
 CONFIG_MTD=y
 CONFIG_MTD_OF_PARTS=y
 CONFIG_MTD_BLOCK=y
@@ -97,8 +97,8 @@ CONFIG_ROOT_NFS=y
 CONFIG_NLS_DEFAULT="utf8"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=m
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_INFO=y
diff --git a/arch/arm/configs/spear3xx_defconfig b/arch/arm/configs/spear3xx_defconfig
index afca722d6605..a96ed5cf778e 100644
--- a/arch/arm/configs/spear3xx_defconfig
+++ b/arch/arm/configs/spear3xx_defconfig
@@ -1,16 +1,16 @@
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_PARTITION_ADVANCED=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_PLAT_SPEAR=y
 CONFIG_ARCH_SPEAR3XX=y
 CONFIG_MACH_SPEAR300=y
 CONFIG_MACH_SPEAR310=y
 CONFIG_MACH_SPEAR320=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_PARTITION_ADVANCED=y
 CONFIG_BINFMT_MISC=y
 CONFIG_NET=y
 CONFIG_MTD=y
@@ -77,8 +77,8 @@ CONFIG_JFFS2_FS=y
 CONFIG_NLS_DEFAULT="utf8"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=m
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_INFO=y
diff --git a/arch/arm/configs/spear6xx_defconfig b/arch/arm/configs/spear6xx_defconfig
index bc32c02cb86b..3d631b1f3cfa 100644
--- a/arch/arm/configs/spear6xx_defconfig
+++ b/arch/arm/configs/spear6xx_defconfig
@@ -1,13 +1,13 @@
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BLK_DEV_INITRD=y
+# CONFIG_ARCH_MULTI_V7 is not set
+CONFIG_PLAT_SPEAR=y
+CONFIG_ARCH_SPEAR6XX=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_PLAT_SPEAR=y
-CONFIG_ARCH_SPEAR6XX=y
 CONFIG_BINFMT_MISC=y
 CONFIG_NET=y
 CONFIG_MTD=y
@@ -66,8 +66,8 @@ CONFIG_JFFS2_FS=y
 CONFIG_NLS_DEFAULT="utf8"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=m
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_INFO=y
diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig
index f42c7a502b6e..66d74653f3fb 100644
--- a/arch/arm/configs/spitz_defconfig
+++ b/arch/arm/configs/spitz_defconfig
@@ -1,26 +1,22 @@
 CONFIG_SYSVIPC=y
+CONFIG_PREEMPT=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
 CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_PXA=y
 CONFIG_PXA_SHARPSL=y
 CONFIG_MACH_AKITA=y
 CONFIG_MACH_BORZOI=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_PXA2XX=y
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   debug"
 CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=m
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
 CONFIG_BINFMT_MISC=m
 CONFIG_PM=y
 CONFIG_NET=y
@@ -54,11 +50,6 @@ CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-CONFIG_PXA_FICP=m
 CONFIG_BT=m
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
@@ -77,6 +68,8 @@ CONFIG_BT_HCIBT3C=m
 CONFIG_BT_HCIBLUECARD=m
 CONFIG_BT_HCIBTUART=m
 CONFIG_BT_HCIVHCI=m
+CONFIG_PCCARD=y
+CONFIG_PCMCIA_PXA2XX=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
@@ -90,10 +83,15 @@ CONFIG_CHR_DEV_ST=m
 CONFIG_CHR_DEV_OSST=m
 CONFIG_BLK_DEV_SR=m
 CONFIG_CHR_DEV_SG=m
+# CONFIG_BLK_DEV_BSG is not set
 CONFIG_ATA=y
 CONFIG_PATA_PCMCIA=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
+CONFIG_PCMCIA_PCNET=m
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_ASYNC=m
 CONFIG_USB_CATC=m
 CONFIG_USB_KAWETH=m
 CONFIG_USB_PEGASUS=m
@@ -101,10 +99,6 @@ CONFIG_USB_RTL8150=m
 CONFIG_USB_USBNET=m
 # CONFIG_USB_NET_CDC_SUBSET is not set
 CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_BSDCOMP=m
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=y
@@ -115,11 +109,11 @@ CONFIG_TOUCHSCREEN_ADS7846=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_UINPUT=m
 # CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=m
 CONFIG_SERIAL_8250_CS=m
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 CONFIG_SPI=y
 CONFIG_SPI_PXA2XX=y
 CONFIG_FB=y
@@ -130,11 +124,6 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_USB_KBD=m
-CONFIG_USB_MOUSE=m
 CONFIG_HID_A4TECH=m
 CONFIG_HID_APPLE=m
 CONFIG_HID_BELKIN=m
@@ -151,6 +140,8 @@ CONFIG_HID_PETALYNX=m
 CONFIG_HID_SAMSUNG=m
 CONFIG_HID_SONY=m
 CONFIG_HID_SUNPLUS=m
+CONFIG_USB_KBD=m
+CONFIG_USB_MOUSE=m
 CONFIG_USB=m
 CONFIG_USB_MON=m
 CONFIG_USB_OHCI_HCD=m
@@ -219,16 +210,12 @@ CONFIG_NFS_V3=y
 CONFIG_NFS_V4=y
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_PARTITION_ADVANCED=y
+CONFIG_NFS_V4=m
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_LL=y
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_ECB=m
@@ -251,3 +238,9 @@ CONFIG_CRYPTO_TWOFISH=m
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRC_CCITT=y
 CONFIG_LIBCRC32C=m
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_FTRACE is not set
diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig
index 551db328009d..dc1a32f50b7e 100644
--- a/arch/arm/configs/stm32_defconfig
+++ b/arch/arm/configs/stm32_defconfig
@@ -1,5 +1,6 @@
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -11,8 +12,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
 CONFIG_EMBEDDED=y
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_SLUB_DEBUG is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_MMU is not set
 CONFIG_ARCH_STM32=y
@@ -21,15 +20,12 @@ CONFIG_SET_MEM_PARAM=y
 CONFIG_DRAM_BASE=0x90000000
 CONFIG_FLASH_MEM_BASE=0x08000000
 CONFIG_FLASH_SIZE=0x00200000
-CONFIG_PREEMPT=y
 # CONFIG_ATAGS is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_XIP_KERNEL=y
 CONFIG_XIP_PHYS_ADDR=0x08008000
 CONFIG_BINFMT_FLAT=y
-CONFIG_BINFMT_SHARED_FLAT=y
 # CONFIG_COREDUMP is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_FW_LOADER is not set
@@ -39,9 +35,9 @@ CONFIG_KEYBOARD_GPIO=y
 # CONFIG_VT is not set
 # CONFIG_UNIX98_PTYS is not set
 # CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_NONSTANDARD=y
 CONFIG_SERIAL_STM32=y
 CONFIG_SERIAL_STM32_CONSOLE=y
+CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
@@ -75,12 +71,13 @@ CONFIG_EXT3_FS=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY_USER is not set
 CONFIG_NLS=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC7=y
 CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
 # CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_SLUB_DEBUG is not set
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_CRYPTO=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC7=y
diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig
index 8ba7935bd039..bddc82f78942 100644
--- a/arch/arm/configs/sunxi_defconfig
+++ b/arch/arm/configs/sunxi_defconfig
@@ -1,4 +1,4 @@
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
@@ -26,7 +26,6 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 CONFIG_CAN=y
-CONFIG_CAN_SUN4I=y
 # CONFIG_WIRELESS is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@@ -52,6 +51,7 @@ CONFIG_STMMAC_ETH=y
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_MICREL_PHY=y
 CONFIG_REALTEK_PHY=y
+CONFIG_CAN_SUN4I=y
 # CONFIG_WLAN is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_SUN4I_LRADC=y
@@ -97,9 +97,9 @@ CONFIG_IR_SUNXI=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_PLATFORM_SUPPORT=y
 CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_V4L_MEM2MEM_DRIVERS=y
 CONFIG_VIDEO_SUN4I_CSI=y
 CONFIG_VIDEO_SUN6I_CSI=y
-CONFIG_V4L_MEM2MEM_DRIVERS=y
 CONFIG_VIDEO_SUN8I_DEINTERLACE=y
 CONFIG_VIDEO_SUN8I_ROTATE=y
 CONFIG_DRM=y
diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig
index 3a9503fe84cb..3b29ae1fb750 100644
--- a/arch/arm/configs/tct_hammer_defconfig
+++ b/arch/arm/configs/tct_hammer_defconfig
@@ -1,24 +1,25 @@
 # CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
-# CONFIG_KALLSYMS is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_SHMEM is not set
-CONFIG_SLOB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_KALLSYMS is not set
+CONFIG_ARCH_MULTI_V4T=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_S3C24XX=y
 CONFIG_MACH_TCT_HAMMER=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="mem=64M root=/dev/ram0 init=/linuxrc rw"
 CONFIG_FPE_NWFPE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_SWAP is not set
+CONFIG_SLOB=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -53,5 +54,5 @@ CONFIG_JFFS2_FS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_LL=y
 CONFIG_CRC_CCITT=y
+CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index 289d022acc4b..f32047e24b63 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -1,5 +1,5 @@
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_IKCONFIG=y
@@ -16,7 +16,6 @@ CONFIG_BLK_DEV_INITRD=y
 # CONFIG_ELF_CORE is not set
 CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
-CONFIG_SLAB=y
 CONFIG_ARCH_TEGRA=y
 CONFIG_SMP=y
 CONFIG_HIGHMEM=y
@@ -29,12 +28,11 @@ CONFIG_CPU_IDLE=y
 CONFIG_ARM_TEGRA_CPUIDLE=y
 CONFIG_VFP=y
 CONFIG_NEON=y
-CONFIG_TRUSTED_FOUNDATIONS=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
+CONFIG_SLAB=y
 CONFIG_CMA=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -56,7 +54,6 @@ CONFIG_IPV6_MIP6=y
 CONFIG_IPV6_TUNNEL=y
 CONFIG_IPV6_MULTIPLE_TABLES=y
 CONFIG_CAN=y
-CONFIG_CAN_MCP251X=y
 CONFIG_BT=y
 CONFIG_BT_RFCOMM=y
 CONFIG_BT_BNEP=y
@@ -80,6 +77,7 @@ CONFIG_PCI_TEGRA=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_TEGRA_GMI=y
+CONFIG_TRUSTED_FOUNDATIONS=y
 CONFIG_MTD=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_BLK_DEV_LOOP=y
@@ -91,6 +89,7 @@ CONFIG_ISL29003=y
 CONFIG_EEPROM_AT24=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_BSG is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_ATA=y
 CONFIG_SATA_AHCI=y
@@ -99,6 +98,7 @@ CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
 CONFIG_IGB=y
 CONFIG_R8169=y
+CONFIG_CAN_MCP251X=y
 CONFIG_USB_PEGASUS=y
 CONFIG_USB_USBNET=y
 CONFIG_USB_NET_SMSC75XX=y
@@ -114,9 +114,9 @@ CONFIG_KEYBOARD_GPIO=y
 CONFIG_KEYBOARD_TEGRA=y
 CONFIG_KEYBOARD_CROS_EC=y
 CONFIG_KEYBOARD_CAP11XX=y
+CONFIG_MOUSE_PS2_ELANTECH=y
 CONFIG_MOUSE_ELAN_I2C=m
 CONFIG_MOUSE_ELAN_I2C_SMBUS=y
-CONFIG_MOUSE_PS2_ELANTECH=y
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ATMEL_MXT=y
 CONFIG_TOUCHSCREEN_ELAN=y
@@ -139,6 +139,7 @@ CONFIG_I2C_MUX_GPIO=y
 CONFIG_I2C_MUX_PCA954x=y
 CONFIG_I2C_MUX_PINCTRL=y
 CONFIG_I2C_TEGRA=y
+CONFIG_I2C_CROS_EC_TUNNEL=m
 CONFIG_SPI=y
 CONFIG_SPI_TEGRA114=y
 CONFIG_SPI_TEGRA20_SFLASH=y
@@ -158,9 +159,9 @@ CONFIG_POWER_RESET_AS3722=y
 CONFIG_POWER_RESET_GPIO=y
 CONFIG_POWER_RESET_GPIO_RESTART=y
 CONFIG_BATTERY_SBS=y
-CONFIG_CHARGER_BQ24735=y
 CONFIG_BATTERY_BQ27XXX=y
 CONFIG_CHARGER_GPIO=y
+CONFIG_CHARGER_BQ24735=y
 CONFIG_CHARGER_SMB347=y
 CONFIG_CHARGER_TPS65090=y
 CONFIG_BATTERY_ACER_A500=y
@@ -198,8 +199,10 @@ CONFIG_REGULATOR_TPS6586X=y
 CONFIG_REGULATOR_TPS65910=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_USB_SUPPORT=y
-CONFIG_USB_VIDEO_CLASS=y
 CONFIG_USB_GSPCA=y
+CONFIG_USB_VIDEO_CLASS=y
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_TEGRA_VDE=y
 CONFIG_DRM=y
 CONFIG_DRM_NOUVEAU=m
 CONFIG_DRM_TEGRA=y
@@ -286,12 +289,10 @@ CONFIG_SERIO_NVEC_PS2=y
 CONFIG_NVEC_POWER=y
 CONFIG_NVEC_PAZ00=y
 CONFIG_STAGING_MEDIA=y
-CONFIG_TEGRA_VDE=y
 CONFIG_CHROME_PLATFORMS=y
 CONFIG_CROS_EC=y
 CONFIG_CROS_EC_I2C=m
 CONFIG_CROS_EC_SPI=m
-CONFIG_I2C_CROS_EC_TUNNEL=m
 CONFIG_TEGRA_IOMMU_GART=y
 CONFIG_TEGRA_IOMMU_SMMU=y
 CONFIG_ARCH_TEGRA_2x_SOC=y
@@ -342,7 +343,7 @@ CONFIG_CRYPTO_TWOFISH=y
 CONFIG_DMA_CMA=y
 CONFIG_CMA_SIZE_MBYTES=64
 CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_SLAB=y
 CONFIG_DEBUG_VM=y
diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig
index d66f0c287d41..009abe1e49ef 100644
--- a/arch/arm/configs/trizeps4_defconfig
+++ b/arch/arm/configs/trizeps4_defconfig
@@ -1,5 +1,6 @@
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_PREEMPT=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_IKCONFIG=y
@@ -8,24 +9,24 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_PXA=y
 CONFIG_TRIZEPS_PXA=y
 CONFIG_MACH_TRIZEPS4=y
-CONFIG_PCCARD=y
-# CONFIG_PCMCIA_LOAD_CIS is not set
-CONFIG_PCMCIA_PXA2XX=y
-CONFIG_PREEMPT=y
 CONFIG_AEABI=y
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="root=fe01 console=ttyS0,38400n8 loglevel=5"
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
 CONFIG_PM=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_LDM_PARTITION=y
+CONFIG_SLAB=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -38,14 +39,6 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
 CONFIG_VLAN_8021Q=m
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-CONFIG_IRDA_ULTRA=y
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-CONFIG_IRTTY_SIR=m
 CONFIG_BT=m
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
@@ -54,6 +47,9 @@ CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
 CONFIG_CFG80211=y
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_LOAD_CIS is not set
+CONFIG_PCMCIA_PXA2XX=y
 CONFIG_CONNECTOR=y
 CONFIG_MTD=y
 CONFIG_MTD_REDBOOT_PARTS=y
@@ -76,13 +72,13 @@ CONFIG_MTD_DOC2001PLUS=y
 CONFIG_MTD_DOCPROBE_ADVANCED=y
 CONFIG_MTD_DOCPROBE_ADDRESS=0x4000000
 CONFIG_MTD_DOCPROBE_HIGH=y
+CONFIG_MTD_ONENAND=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_DISKONCHIP=y
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
 CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
-CONFIG_MTD_ONENAND=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=y
@@ -96,9 +92,17 @@ CONFIG_ATA=m
 CONFIG_PATA_PCMCIA=m
 CONFIG_PATA_PLATFORM=m
 CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
 CONFIG_NET_ETHERNET=y
 CONFIG_DM9000=y
+CONFIG_PHYLIB=y
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
 CONFIG_HOSTAP=y
 CONFIG_HOSTAP_FIRMWARE=y
 CONFIG_HOSTAP_FIRMWARE_NVRAM=y
@@ -106,14 +110,6 @@ CONFIG_HOSTAP_CS=y
 CONFIG_HERMES=y
 CONFIG_PCMCIA_HERMES=y
 CONFIG_PCMCIA_SPECTRUM=y
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
 CONFIG_INPUT_EVDEV=y
@@ -141,17 +137,14 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 CONFIG_SOUND=y
 CONFIG_SND=y
-CONFIG_SND_SEQUENCER=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
 CONFIG_SND_VERBOSE_PRINTK=y
 CONFIG_SND_DEBUG=y
+CONFIG_SND_SEQUENCER=y
 CONFIG_SND_PXA2XX_AC97=y
 CONFIG_SND_USB_AUDIO=m
 # CONFIG_USB_HID is not set
@@ -190,8 +183,6 @@ CONFIG_NFSD=y
 CONFIG_NFSD_V4=y
 CONFIG_SMB_FS=m
 CONFIG_CIFS=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_LDM_PARTITION=y
 CONFIG_NLS_DEFAULT="iso8859-15"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_850=y
@@ -199,9 +190,6 @@ CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=m
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_UTF8=m
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_USER=y
 CONFIG_KEYS=y
 CONFIG_SECURITY=y
 CONFIG_CRYPTO_PCBC=m
@@ -211,3 +199,9 @@ CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
 CONFIG_LIBCRC32C=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index 3b30913d7d8d..3bdc217667a6 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -1,4 +1,3 @@
-# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -20,8 +19,8 @@ CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
+# CONFIG_SWAP is not set
 CONFIG_CMA=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -41,6 +40,8 @@ CONFIG_MAC80211_LEDS=y
 CONFIG_CAIF=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_GNSS=y
+CONFIG_GNSS_SIRF_SERIAL=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=65536
 CONFIG_NETDEVICES=y
@@ -83,6 +84,8 @@ CONFIG_SPI_GPIO=y
 CONFIG_SPI_PL022=y
 CONFIG_GPIO_STMPE=y
 CONFIG_GPIO_TC3589X=y
+CONFIG_BATTERY_SAMSUNG_SDI=y
+CONFIG_AB8500_BM=y
 CONFIG_SENSORS_IIO_HWMON=y
 CONFIG_SENSORS_NTC_THERMISTOR=y
 CONFIG_THERMAL=y
@@ -98,10 +101,13 @@ CONFIG_VIDEO_V4L2_SUBDEV_API=y
 CONFIG_V4L2_FLASH_LED_CLASS=y
 CONFIG_DRM=y
 CONFIG_DRM_PANEL_NOVATEK_NT35510=y
+CONFIG_DRM_PANEL_NOVATEK_NT35560=y
+CONFIG_DRM_PANEL_SAMSUNG_DB7430=y
 CONFIG_DRM_PANEL_SAMSUNG_S6D16D0=y
+CONFIG_DRM_PANEL_SAMSUNG_S6D27A1=y
 CONFIG_DRM_PANEL_SAMSUNG_S6E63M0=y
 CONFIG_DRM_PANEL_SAMSUNG_S6E63M0_DSI=y
-CONFIG_DRM_PANEL_SONY_ACX424AKP=y
+CONFIG_DRM_PANEL_WIDECHIPS_WS2401=y
 CONFIG_DRM_LIMA=y
 CONFIG_DRM_MCDE=y
 CONFIG_FB=y
@@ -129,6 +135,7 @@ CONFIG_LEDS_LM3530=y
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_LP55XX_COMMON=y
 CONFIG_LEDS_LP5521=y
+CONFIG_LEDS_REGULATOR=y
 CONFIG_LEDS_RT8515=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
@@ -144,17 +151,22 @@ CONFIG_IIO_SW_TRIGGER=y
 CONFIG_BMA180=y
 CONFIG_BMC150_ACCEL=y
 CONFIG_IIO_ST_ACCEL_3AXIS=y
+# CONFIG_IIO_ST_ACCEL_SPI_3AXIS is not set
 CONFIG_IIO_RESCALE=y
 CONFIG_MPU3050_I2C=y
 CONFIG_IIO_ST_GYRO_3AXIS=y
+# CONFIG_IIO_ST_GYRO_SPI_3AXIS is not set
 CONFIG_INV_MPU6050_I2C=y
 CONFIG_BH1780=y
 CONFIG_GP2AP002=y
+CONFIG_TSL2772=y
 CONFIG_AK8974=y
 CONFIG_IIO_ST_MAGN_3AXIS=y
+# CONFIG_IIO_ST_MAGN_SPI_3AXIS is not set
 CONFIG_YAMAHA_YAS530=y
 CONFIG_IIO_HRTIMER_TRIGGER=y
 CONFIG_IIO_ST_PRESS=y
+# CONFIG_IIO_ST_PRESS_SPI is not set
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
@@ -173,10 +185,9 @@ CONFIG_CRYPTO_DEV_UX500_CRYP=y
 CONFIG_CRYPTO_DEV_UX500_HASH=y
 CONFIG_CRYPTO_DEV_UX500_DEBUG=y
 CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig
index d06aa64e05a1..67e3f9138306 100644
--- a/arch/arm/configs/versatile_defconfig
+++ b/arch/arm/configs/versatile_defconfig
@@ -4,7 +4,6 @@ CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_VERSATILE=y
 CONFIG_AEABI=y
@@ -15,6 +14,7 @@ CONFIG_VFP=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
+CONFIG_SLAB=y
 CONFIG_CMA=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -86,11 +86,10 @@ CONFIG_ROMFS_FS=y
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
 CONFIG_NLS_CODEPAGE_850=m
 CONFIG_NLS_ISO8859_1=m
+CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/vexpress_defconfig b/arch/arm/configs/vexpress_defconfig
index 947987730eb7..ac3fd7523698 100644
--- a/arch/arm/configs/vexpress_defconfig
+++ b/arch/arm/configs/vexpress_defconfig
@@ -20,15 +20,12 @@ CONFIG_MCPM=y
 CONFIG_VMSPLIT_2G=y
 CONFIG_NR_CPUS=8
 CONFIG_ARM_PSCI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyAMA0"
 CONFIG_CPU_IDLE=y
 CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_CMA=y
 CONFIG_NET=y
@@ -56,6 +53,7 @@ CONFIG_MTD_UBI=y
 CONFIG_VIRTIO_BLK=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
 CONFIG_SCSI_VIRTIO=y
 CONFIG_ATA=y
 CONFIG_NETDEVICES=y
@@ -135,9 +133,9 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 # CONFIG_CRYPTO_HW is not set
 CONFIG_DMA_CMA=y
-CONFIG_DEBUG_INFO=y
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DETECT_HUNG_TASK=y
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/vf610m4_defconfig b/arch/arm/configs/vf610m4_defconfig
index a89f035c3b01..2e47cc57a928 100644
--- a/arch/arm/configs/vf610m4_defconfig
+++ b/arch/arm/configs/vf610m4_defconfig
@@ -16,10 +16,9 @@ CONFIG_FLASH_SIZE=0x01000000
 CONFIG_CMDLINE="console=/dev/ttyLP2"
 CONFIG_XIP_KERNEL=y
 CONFIG_XIP_PHYS_ADDR=0x0f000080
+# CONFIG_SUSPEND is not set
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
-CONFIG_BINFMT_SHARED_FLAT=y
-# CONFIG_SUSPEND is not set
 # CONFIG_UEVENT_HELPER is not set
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig
index 989599ce5300..02f9849893b2 100644
--- a/arch/arm/configs/viper_defconfig
+++ b/arch/arm/configs/viper_defconfig
@@ -1,22 +1,15 @@
-# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=13
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_EXPERT=y
 # CONFIG_ELF_CORE is not set
 # CONFIG_SHMEM is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_PXA=y
 CONFIG_ARCH_VIPER=y
 CONFIG_IWMMXT=y
-CONFIG_PCCARD=m
-CONFIG_PCMCIA_PXA2XX=m
 CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="root=31:02 rootfstype=jffs2 ro console=ttyS0,115200"
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=m
@@ -25,6 +18,11 @@ CONFIG_CPU_FREQ_GOV_ONDEMAND=m
 CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
 CONFIG_FPE_FASTFPE=y
 CONFIG_PM=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_SWAP is not set
+CONFIG_SLAB=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -40,6 +38,8 @@ CONFIG_BT_BNEP=m
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
+CONFIG_PCCARD=m
+CONFIG_PCMCIA_PXA2XX=m
 CONFIG_FW_LOADER=m
 CONFIG_MTD=y
 CONFIG_MTD_REDBOOT_PARTS=y
@@ -60,20 +60,21 @@ CONFIG_MTD_PXA2XX=y
 CONFIG_BLK_DEV_LOOP=m
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=m
+# CONFIG_BLK_DEV_BSG is not set
 CONFIG_ATA=m
 # CONFIG_SATA_PMP is not set
 CONFIG_PATA_PCMCIA=m
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_SMC91X=y
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_ASYNC=m
 CONFIG_USB_PEGASUS=m
 CONFIG_USB_USBNET=m
 # CONFIG_USB_NET_CDC_SUBSET is not set
 CONFIG_NET_PCMCIA=y
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
 CONFIG_INPUT_MOUSEDEV=m
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_EVDEV=m
@@ -93,12 +94,12 @@ CONFIG_INPUT_MISC=y
 CONFIG_INPUT_UINPUT=m
 # CONFIG_CONSOLE_TRANSLATIONS is not set
 # CONFIG_VT_CONSOLE is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=m
 CONFIG_SERIAL_8250_NR_UARTS=5
 CONFIG_SERIAL_8250_RUNTIME_UARTS=5
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 # CONFIG_I2C_HELPER_AUTO is not set
@@ -145,17 +146,15 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-CONFIG_PARTITION_ADVANCED=y
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_850=m
 CONFIG_NLS_ISO8859_1=m
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_UTF8=m
+CONFIG_CRC_T10DIF=m
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_MUTEXES=y
 # CONFIG_FTRACE is not set
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_ARC4=m
-CONFIG_CRC_T10DIF=m
diff --git a/arch/arm/configs/vt8500_v6_v7_defconfig b/arch/arm/configs/vt8500_v6_v7_defconfig
index 9b85326ba287..41607a84abc8 100644
--- a/arch/arm/configs/vt8500_v6_v7_defconfig
+++ b/arch/arm/configs/vt8500_v6_v7_defconfig
@@ -1,4 +1,4 @@
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_ARCH_MULTI_V6=y
@@ -50,8 +50,8 @@ CONFIG_I2C_WMT=y
 CONFIG_PINCTRL_SINGLE=y
 CONFIG_PINCTRL_WM8750=y
 CONFIG_GPIO_GENERIC_PLATFORM=y
-CONFIG_POWER_SUPPLY=y
 CONFIG_POWER_RESET=y
+CONFIG_POWER_SUPPLY=y
 CONFIG_MFD_SYSCON=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
diff --git a/arch/arm/configs/xcep_defconfig b/arch/arm/configs/xcep_defconfig
index 4d8e7f2eaef7..ea59e4b6bfc5 100644
--- a/arch/arm/configs/xcep_defconfig
+++ b/arch/arm/configs/xcep_defconfig
@@ -1,6 +1,8 @@
 CONFIG_LOCALVERSION=".xcep-itech"
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
@@ -10,25 +12,23 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 # CONFIG_UID16 is not set
 # CONFIG_SHMEM is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLOB=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLOCK is not set
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_PXA=y
 CONFIG_MACH_XCEP=y
 CONFIG_IWMMXT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
 CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="root=mtd4 rootfstype=jffs2 ro console=ttyS0,115200"
 CONFIG_FPE_NWFPE=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLOCK is not set
+CONFIG_SLOB=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_NET=y
 CONFIG_PACKET=m
 CONFIG_UNIX=y
@@ -53,9 +53,9 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=m
 CONFIG_I2C_CHARDEV=m
@@ -77,13 +77,13 @@ CONFIG_NFS_V3=y
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="utf8"
 CONFIG_NLS_UTF8=m
+# CONFIG_CRYPTO_HW is not set
+CONFIG_LIBCRC32C=m
 CONFIG_PRINTK_TIME=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_FTRACE is not set
 # CONFIG_ARM_UNWIND is not set
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_LIBCRC32C=m
diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig
index d3b98c4d225b..c4535315e216 100644
--- a/arch/arm/configs/zeus_defconfig
+++ b/arch/arm/configs/zeus_defconfig
@@ -1,16 +1,11 @@
 CONFIG_SYSVIPC=y
 CONFIG_TINY_RCU=y
 CONFIG_LOG_BUF_SHIFT=13
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_PXA=y
 CONFIG_MACH_ARCOM_ZEUS=y
-CONFIG_PCCARD=m
-CONFIG_PCMCIA_PXA2XX=m
 CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_CMDLINE="root=31:02 rootfstype=jffs2 ro console=ttyS0,115200"
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=m
@@ -20,6 +15,9 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
 CONFIG_FPE_NWFPE=y
 CONFIG_PM=y
 CONFIG_APM_EMULATION=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -38,6 +36,8 @@ CONFIG_BT_HCIUART_BCSP=y
 CONFIG_CFG80211=m
 CONFIG_LIB80211=m
 CONFIG_MAC80211=m
+CONFIG_PCCARD=m
+CONFIG_PCMCIA_PXA2XX=m
 CONFIG_MTD=y
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_PARTS_READONLY=y
@@ -58,21 +58,22 @@ CONFIG_BLK_DEV_LOOP=m
 CONFIG_EEPROM_AT24=m
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=m
+# CONFIG_BLK_DEV_BSG is not set
 CONFIG_ATA=m
 # CONFIG_SATA_PMP is not set
 CONFIG_PATA_PCMCIA=m
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_DM9000=y
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_ASYNC=m
 CONFIG_HERMES=m
 CONFIG_PCMCIA_HERMES=m
 CONFIG_RT2X00=m
 CONFIG_RT73USB=m
 CONFIG_NET_PCMCIA=y
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_KEYBOARD is not set
@@ -89,11 +90,11 @@ CONFIG_TOUCHSCREEN_TOUCHWIN=m
 CONFIG_TOUCHSCREEN_TOUCHIT213=m
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_UINPUT=m
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=7
 CONFIG_SERIAL_8250_RUNTIME_UARTS=7
-# CONFIG_LEGACY_PTYS is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 # CONFIG_I2C_HELPER_AUTO is not set
@@ -160,15 +161,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-CONFIG_PARTITION_ADVANCED=y
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_850=m
 CONFIG_NLS_ISO8859_1=m
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_UTF8=m
-CONFIG_MAGIC_SYSRQ=y
+CONFIG_CRC_T10DIF=m
 CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_MUTEXES=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=m
diff --git a/arch/arm/crypto/Kconfig b/arch/arm/crypto/Kconfig
index 2b575792363e..3858c4d4cb98 100644
--- a/arch/arm/crypto/Kconfig
+++ b/arch/arm/crypto/Kconfig
@@ -1,92 +1,156 @@
 # SPDX-License-Identifier: GPL-2.0
 
-menuconfig ARM_CRYPTO
-	bool "ARM Accelerated Cryptographic Algorithms"
-	depends on ARM
+menu "Accelerated Cryptographic Algorithms for CPU (arm)"
+
+config CRYPTO_CURVE25519_NEON
+	tristate "Public key crypto: Curve25519 (NEON)"
+	depends on KERNEL_MODE_NEON
+	select CRYPTO_LIB_CURVE25519_GENERIC
+	select CRYPTO_ARCH_HAVE_LIB_CURVE25519
+	help
+	  Curve25519 algorithm
+
+	  Architecture: arm with
+	  - NEON (Advanced SIMD) extensions
+
+config CRYPTO_GHASH_ARM_CE
+	tristate "Hash functions: GHASH (PMULL/NEON/ARMv8 Crypto Extensions)"
+	depends on KERNEL_MODE_NEON
+	select CRYPTO_HASH
+	select CRYPTO_CRYPTD
+	select CRYPTO_GF128MUL
 	help
-	  Say Y here to choose from a selection of cryptographic algorithms
-	  implemented using ARM specific CPU features or instructions.
+	  GCM GHASH function (NIST SP800-38D)
 
-if ARM_CRYPTO
+	  Architecture: arm using
+	  - PMULL (Polynomial Multiply Long) instructions
+	  - NEON (Advanced SIMD) extensions
+	  - ARMv8 Crypto Extensions
+
+	  Use an implementation of GHASH (used by the GCM AEAD chaining mode)
+	  that uses the 64x64 to 128 bit polynomial multiplication (vmull.p64)
+	  that is part of the ARMv8 Crypto Extensions, or a slower variant that
+	  uses the vmull.p8 instruction that is part of the basic NEON ISA.
+
+config CRYPTO_NHPOLY1305_NEON
+	tristate "Hash functions: NHPoly1305 (NEON)"
+	depends on KERNEL_MODE_NEON
+	select CRYPTO_NHPOLY1305
+	help
+	  NHPoly1305 hash function (Adiantum)
+
+	  Architecture: arm using:
+	  - NEON (Advanced SIMD) extensions
+
+config CRYPTO_POLY1305_ARM
+	tristate "Hash functions: Poly1305 (NEON)"
+	select CRYPTO_HASH
+	select CRYPTO_ARCH_HAVE_LIB_POLY1305
+	help
+	  Poly1305 authenticator algorithm (RFC7539)
+
+	  Architecture: arm optionally using
+	  - NEON (Advanced SIMD) extensions
+
+config CRYPTO_BLAKE2S_ARM
+	bool "Hash functions: BLAKE2s"
+	select CRYPTO_ARCH_HAVE_LIB_BLAKE2S
+	help
+	  BLAKE2s cryptographic hash function (RFC 7693)
+
+	  Architecture: arm
+
+	  This is faster than the generic implementations of BLAKE2s and
+	  BLAKE2b, but slower than the NEON implementation of BLAKE2b.
+	  There is no NEON implementation of BLAKE2s, since NEON doesn't
+	  really help with it.
+
+config CRYPTO_BLAKE2B_NEON
+	tristate "Hash functions: BLAKE2b (NEON)"
+	depends on KERNEL_MODE_NEON
+	select CRYPTO_BLAKE2B
+	help
+	  BLAKE2b cryptographic hash function (RFC 7693)
+
+	  Architecture: arm using
+	  - NEON (Advanced SIMD) extensions
+
+	  BLAKE2b digest algorithm optimized with ARM NEON instructions.
+	  On ARM processors that have NEON support but not the ARMv8
+	  Crypto Extensions, typically this BLAKE2b implementation is
+	  much faster than the SHA-2 family and slightly faster than
+	  SHA-1.
 
 config CRYPTO_SHA1_ARM
-	tristate "SHA1 digest algorithm (ARM-asm)"
+	tristate "Hash functions: SHA-1"
 	select CRYPTO_SHA1
 	select CRYPTO_HASH
 	help
-	  SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented
-	  using optimized ARM assembler.
+	  SHA-1 secure hash algorithm (FIPS 180)
+
+	  Architecture: arm
 
 config CRYPTO_SHA1_ARM_NEON
-	tristate "SHA1 digest algorithm (ARM NEON)"
+	tristate "Hash functions: SHA-1 (NEON)"
 	depends on KERNEL_MODE_NEON
 	select CRYPTO_SHA1_ARM
 	select CRYPTO_SHA1
 	select CRYPTO_HASH
 	help
-	  SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented
-	  using optimized ARM NEON assembly, when NEON instructions are
-	  available.
+	  SHA-1 secure hash algorithm (FIPS 180)
+
+	  Architecture: arm using
+	  - NEON (Advanced SIMD) extensions
 
 config CRYPTO_SHA1_ARM_CE
-	tristate "SHA1 digest algorithm (ARM v8 Crypto Extensions)"
+	tristate "Hash functions: SHA-1 (ARMv8 Crypto Extensions)"
 	depends on KERNEL_MODE_NEON
 	select CRYPTO_SHA1_ARM
 	select CRYPTO_HASH
 	help
-	  SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented
-	  using special ARMv8 Crypto Extensions.
+	  SHA-1 secure hash algorithm (FIPS 180)
+
+	  Architecture: arm using ARMv8 Crypto Extensions
 
 config CRYPTO_SHA2_ARM_CE
-	tristate "SHA-224/256 digest algorithm (ARM v8 Crypto Extensions)"
+	tristate "Hash functions: SHA-224 and SHA-256 (ARMv8 Crypto Extensions)"
 	depends on KERNEL_MODE_NEON
 	select CRYPTO_SHA256_ARM
 	select CRYPTO_HASH
 	help
-	  SHA-256 secure hash standard (DFIPS 180-2) implemented
-	  using special ARMv8 Crypto Extensions.
+	  SHA-224 and SHA-256 secure hash algorithms (FIPS 180)
+
+	  Architecture: arm using
+	  - ARMv8 Crypto Extensions
 
 config CRYPTO_SHA256_ARM
-	tristate "SHA-224/256 digest algorithm (ARM-asm and NEON)"
+	tristate "Hash functions: SHA-224 and SHA-256 (NEON)"
 	select CRYPTO_HASH
 	depends on !CPU_V7M
 	help
-	  SHA-256 secure hash standard (DFIPS 180-2) implemented
-	  using optimized ARM assembler and NEON, when available.
+	  SHA-224 and SHA-256 secure hash algorithms (FIPS 180)
+
+	  Architecture: arm using
+	  - NEON (Advanced SIMD) extensions
 
 config CRYPTO_SHA512_ARM
-	tristate "SHA-384/512 digest algorithm (ARM-asm and NEON)"
+	tristate "Hash functions: SHA-384 and SHA-512 (NEON)"
 	select CRYPTO_HASH
 	depends on !CPU_V7M
 	help
-	  SHA-512 secure hash standard (DFIPS 180-2) implemented
-	  using optimized ARM assembler and NEON, when available.
+	  SHA-384 and SHA-512 secure hash algorithms (FIPS 180)
 
-config CRYPTO_BLAKE2S_ARM
-	tristate "BLAKE2s digest algorithm (ARM)"
-	select CRYPTO_ARCH_HAVE_LIB_BLAKE2S
-	help
-	  BLAKE2s digest algorithm optimized with ARM scalar instructions.  This
-	  is faster than the generic implementations of BLAKE2s and BLAKE2b, but
-	  slower than the NEON implementation of BLAKE2b.  (There is no NEON
-	  implementation of BLAKE2s, since NEON doesn't really help with it.)
-
-config CRYPTO_BLAKE2B_NEON
-	tristate "BLAKE2b digest algorithm (ARM NEON)"
-	depends on KERNEL_MODE_NEON
-	select CRYPTO_BLAKE2B
-	help
-	  BLAKE2b digest algorithm optimized with ARM NEON instructions.
-	  On ARM processors that have NEON support but not the ARMv8
-	  Crypto Extensions, typically this BLAKE2b implementation is
-	  much faster than SHA-2 and slightly faster than SHA-1.
+	  Architecture: arm using
+	  - NEON (Advanced SIMD) extensions
 
 config CRYPTO_AES_ARM
-	tristate "Scalar AES cipher for ARM"
+	tristate "Ciphers: AES"
 	select CRYPTO_ALGAPI
 	select CRYPTO_AES
 	help
-	  Use optimized AES assembler routines for ARM platforms.
+	  Block ciphers: AES cipher algorithms (FIPS-197)
+
+	  Architecture: arm
 
 	  On ARM processors without the Crypto Extensions, this is the
 	  fastest AES implementation for single blocks.  For multiple
@@ -98,14 +162,21 @@ config CRYPTO_AES_ARM
 	  such attacks very difficult.
 
 config CRYPTO_AES_ARM_BS
-	tristate "Bit sliced AES using NEON instructions"
+	tristate "Ciphers: AES, modes: ECB/CBC/CTR/XTS (bit-sliced NEON)"
 	depends on KERNEL_MODE_NEON
 	select CRYPTO_SKCIPHER
 	select CRYPTO_LIB_AES
+	select CRYPTO_AES
+	select CRYPTO_CBC
 	select CRYPTO_SIMD
 	help
-	  Use a faster and more secure NEON based implementation of AES in CBC,
-	  CTR and XTS modes
+	  Length-preserving ciphers: AES cipher algorithms (FIPS-197)
+	  with block cipher modes:
+	   - ECB (Electronic Codebook) mode (NIST SP800-38A)
+	   - CBC (Cipher Block Chaining) mode (NIST SP800-38A)
+	   - CTR (Counter) mode (NIST SP800-38A)
+	   - XTS (XOR Encrypt XOR with ciphertext stealing) mode (NIST SP800-38E
+	     and IEEE 1619)
 
 	  Bit sliced AES gives around 45% speedup on Cortex-A15 for CTR mode
 	  and for XTS mode encryption, CBC and XTS mode decryption speedup is
@@ -114,58 +185,59 @@ config CRYPTO_AES_ARM_BS
 	  believed to be invulnerable to cache timing attacks.
 
 config CRYPTO_AES_ARM_CE
-	tristate "Accelerated AES using ARMv8 Crypto Extensions"
+	tristate "Ciphers: AES, modes: ECB/CBC/CTS/CTR/XTS (ARMv8 Crypto Extensions)"
 	depends on KERNEL_MODE_NEON
 	select CRYPTO_SKCIPHER
 	select CRYPTO_LIB_AES
 	select CRYPTO_SIMD
 	help
-	  Use an implementation of AES in CBC, CTR and XTS modes that uses
-	  ARMv8 Crypto Extensions
+	  Length-preserving ciphers: AES cipher algorithms (FIPS-197)
+	   with block cipher modes:
+	   - ECB (Electronic Codebook) mode (NIST SP800-38A)
+	   - CBC (Cipher Block Chaining) mode (NIST SP800-38A)
+	   - CTR (Counter) mode (NIST SP800-38A)
+	   - CTS (Cipher Text Stealing) mode (NIST SP800-38A)
+	   - XTS (XOR Encrypt XOR with ciphertext stealing) mode (NIST SP800-38E
+	     and IEEE 1619)
+
+	  Architecture: arm using:
+	  - ARMv8 Crypto Extensions
 
-config CRYPTO_GHASH_ARM_CE
-	tristate "PMULL-accelerated GHASH using NEON/ARMv8 Crypto Extensions"
-	depends on KERNEL_MODE_NEON
-	select CRYPTO_HASH
-	select CRYPTO_CRYPTD
-	select CRYPTO_GF128MUL
+config CRYPTO_CHACHA20_NEON
+	tristate "Ciphers: ChaCha20, XChaCha20, XChaCha12 (NEON)"
+	select CRYPTO_SKCIPHER
+	select CRYPTO_ARCH_HAVE_LIB_CHACHA
 	help
-	  Use an implementation of GHASH (used by the GCM AEAD chaining mode)
-	  that uses the 64x64 to 128 bit polynomial multiplication (vmull.p64)
-	  that is part of the ARMv8 Crypto Extensions, or a slower variant that
-	  uses the vmull.p8 instruction that is part of the basic NEON ISA.
+	  Length-preserving ciphers: ChaCha20, XChaCha20, and XChaCha12
+	  stream cipher algorithms
 
-config CRYPTO_CRCT10DIF_ARM_CE
-	tristate "CRCT10DIF digest algorithm using PMULL instructions"
-	depends on KERNEL_MODE_NEON
-	depends on CRC_T10DIF
-	select CRYPTO_HASH
+	  Architecture: arm using:
+	  - NEON (Advanced SIMD) extensions
 
 config CRYPTO_CRC32_ARM_CE
-	tristate "CRC32(C) digest algorithm using CRC and/or PMULL instructions"
+	tristate "CRC32C and CRC32"
 	depends on KERNEL_MODE_NEON
 	depends on CRC32
 	select CRYPTO_HASH
+	help
+	  CRC32c CRC algorithm with the iSCSI polynomial (RFC 3385 and RFC 3720)
+	  and CRC32 CRC algorithm (IEEE 802.3)
 
-config CRYPTO_CHACHA20_NEON
-	tristate "NEON and scalar accelerated ChaCha stream cipher algorithms"
-	select CRYPTO_SKCIPHER
-	select CRYPTO_ARCH_HAVE_LIB_CHACHA
+	  Architecture: arm using:
+	  - CRC and/or PMULL instructions
 
-config CRYPTO_POLY1305_ARM
-	tristate "Accelerated scalar and SIMD Poly1305 hash implementations"
-	select CRYPTO_HASH
-	select CRYPTO_ARCH_HAVE_LIB_POLY1305
+	  Drivers: crc32-arm-ce and crc32c-arm-ce
 
-config CRYPTO_NHPOLY1305_NEON
-	tristate "NEON accelerated NHPoly1305 hash function (for Adiantum)"
+config CRYPTO_CRCT10DIF_ARM_CE
+	tristate "CRCT10DIF"
 	depends on KERNEL_MODE_NEON
-	select CRYPTO_NHPOLY1305
+	depends on CRC_T10DIF
+	select CRYPTO_HASH
+	help
+	  CRC16 CRC algorithm used for the T10 (SCSI) Data Integrity Field (DIF)
 
-config CRYPTO_CURVE25519_NEON
-	tristate "NEON accelerated Curve25519 scalar multiplication library"
-	depends on KERNEL_MODE_NEON
-	select CRYPTO_LIB_CURVE25519_GENERIC
-	select CRYPTO_ARCH_HAVE_LIB_CURVE25519
+	  Architecture: arm using:
+	  - PMULL (Polynomial Multiply Long) instructions
+
+endmenu
 
-endif
diff --git a/arch/arm/crypto/Makefile b/arch/arm/crypto/Makefile
index 0274f81cc8ea..971e74546fb1 100644
--- a/arch/arm/crypto/Makefile
+++ b/arch/arm/crypto/Makefile
@@ -9,8 +9,7 @@ obj-$(CONFIG_CRYPTO_SHA1_ARM) += sha1-arm.o
 obj-$(CONFIG_CRYPTO_SHA1_ARM_NEON) += sha1-arm-neon.o
 obj-$(CONFIG_CRYPTO_SHA256_ARM) += sha256-arm.o
 obj-$(CONFIG_CRYPTO_SHA512_ARM) += sha512-arm.o
-obj-$(CONFIG_CRYPTO_BLAKE2S_ARM) += blake2s-arm.o
-obj-$(if $(CONFIG_CRYPTO_BLAKE2S_ARM),y) += libblake2s-arm.o
+obj-$(CONFIG_CRYPTO_BLAKE2S_ARM) += libblake2s-arm.o
 obj-$(CONFIG_CRYPTO_BLAKE2B_NEON) += blake2b-neon.o
 obj-$(CONFIG_CRYPTO_CHACHA20_NEON) += chacha-neon.o
 obj-$(CONFIG_CRYPTO_POLY1305_ARM) += poly1305-arm.o
@@ -32,7 +31,6 @@ sha256-arm-neon-$(CONFIG_KERNEL_MODE_NEON) := sha256_neon_glue.o
 sha256-arm-y	:= sha256-core.o sha256_glue.o $(sha256-arm-neon-y)
 sha512-arm-neon-$(CONFIG_KERNEL_MODE_NEON) := sha512-neon-glue.o
 sha512-arm-y	:= sha512-core.o sha512-glue.o $(sha512-arm-neon-y)
-blake2s-arm-y   := blake2s-shash.o
 libblake2s-arm-y:= blake2s-core.o blake2s-glue.o
 blake2b-neon-y  := blake2b-neon-core.o blake2b-neon-glue.o
 sha1-arm-ce-y	:= sha1-ce-core.o sha1-ce-glue.o
diff --git a/arch/arm/crypto/aes-neonbs-core.S b/arch/arm/crypto/aes-neonbs-core.S
index 7d0cc7f226a5..7b61032f29fa 100644
--- a/arch/arm/crypto/aes-neonbs-core.S
+++ b/arch/arm/crypto/aes-neonbs-core.S
@@ -758,29 +758,24 @@ ENTRY(aesbs_cbc_decrypt)
 ENDPROC(aesbs_cbc_decrypt)
 
 	.macro		next_ctr, q
-	vmov.32		\q\()h[1], r10
+	vmov		\q\()h, r9, r10
 	adds		r10, r10, #1
-	vmov.32		\q\()h[0], r9
 	adcs		r9, r9, #0
-	vmov.32		\q\()l[1], r8
+	vmov		\q\()l, r7, r8
 	adcs		r8, r8, #0
-	vmov.32		\q\()l[0], r7
 	adc		r7, r7, #0
 	vrev32.8	\q, \q
 	.endm
 
 	/*
 	 * aesbs_ctr_encrypt(u8 out[], u8 const in[], u8 const rk[],
-	 *		     int rounds, int blocks, u8 ctr[], u8 final[])
+	 *		     int rounds, int bytes, u8 ctr[])
 	 */
 ENTRY(aesbs_ctr_encrypt)
 	mov		ip, sp
 	push		{r4-r10, lr}
 
-	ldm		ip, {r5-r7}		// load args 4-6
-	teq		r7, #0
-	addne		r5, r5, #1		// one extra block if final != 0
-
+	ldm		ip, {r5, r6}		// load args 4-5
 	vld1.8		{q0}, [r6]		// load counter
 	vrev32.8	q1, q0
 	vmov		r9, r10, d3
@@ -792,20 +787,19 @@ ENTRY(aesbs_ctr_encrypt)
 	adc		r7, r7, #0
 
 99:	vmov		q1, q0
+	sub		lr, r5, #1
 	vmov		q2, q0
+	adr		ip, 0f
 	vmov		q3, q0
+	and		lr, lr, #112
 	vmov		q4, q0
+	cmp		r5, #112
 	vmov		q5, q0
+	sub		ip, ip, lr, lsl #1
 	vmov		q6, q0
+	add		ip, ip, lr, lsr #2
 	vmov		q7, q0
-
-	adr		ip, 0f
-	sub		lr, r5, #1
-	and		lr, lr, #7
-	cmp		r5, #8
-	sub		ip, ip, lr, lsl #5
-	sub		ip, ip, lr, lsl #2
-	movlt		pc, ip			// computed goto if blocks < 8
+	movle		pc, ip			// computed goto if bytes < 112
 
 	next_ctr	q1
 	next_ctr	q2
@@ -820,12 +814,14 @@ ENTRY(aesbs_ctr_encrypt)
 	bl		aesbs_encrypt8
 
 	adr		ip, 1f
-	and		lr, r5, #7
-	cmp		r5, #8
-	movgt		r4, #0
-	ldrle		r4, [sp, #40]		// load final in the last round
-	sub		ip, ip, lr, lsl #2
-	movlt		pc, ip			// computed goto if blocks < 8
+	sub		lr, r5, #1
+	cmp		r5, #128
+	bic		lr, lr, #15
+	ands		r4, r5, #15		// preserves C flag
+	teqcs		r5, r5			// set Z flag if not last iteration
+	sub		ip, ip, lr, lsr #2
+	rsb		r4, r4, #16
+	movcc		pc, ip			// computed goto if bytes < 128
 
 	vld1.8		{q8}, [r1]!
 	vld1.8		{q9}, [r1]!
@@ -834,46 +830,70 @@ ENTRY(aesbs_ctr_encrypt)
 	vld1.8		{q12}, [r1]!
 	vld1.8		{q13}, [r1]!
 	vld1.8		{q14}, [r1]!
-	teq		r4, #0			// skip last block if 'final'
-1:	bne		2f
+1:	subne		r1, r1, r4
 	vld1.8		{q15}, [r1]!
 
-2:	adr		ip, 3f
-	cmp		r5, #8
-	sub		ip, ip, lr, lsl #3
-	movlt		pc, ip			// computed goto if blocks < 8
+	add		ip, ip, #2f - 1b
 
 	veor		q0, q0, q8
-	vst1.8		{q0}, [r0]!
 	veor		q1, q1, q9
-	vst1.8		{q1}, [r0]!
 	veor		q4, q4, q10
-	vst1.8		{q4}, [r0]!
 	veor		q6, q6, q11
-	vst1.8		{q6}, [r0]!
 	veor		q3, q3, q12
-	vst1.8		{q3}, [r0]!
 	veor		q7, q7, q13
-	vst1.8		{q7}, [r0]!
 	veor		q2, q2, q14
+	bne		3f
+	veor		q5, q5, q15
+
+	movcc		pc, ip			// computed goto if bytes < 128
+
+	vst1.8		{q0}, [r0]!
+	vst1.8		{q1}, [r0]!
+	vst1.8		{q4}, [r0]!
+	vst1.8		{q6}, [r0]!
+	vst1.8		{q3}, [r0]!
+	vst1.8		{q7}, [r0]!
 	vst1.8		{q2}, [r0]!
-	teq		r4, #0			// skip last block if 'final'
-	W(bne)		5f
-3:	veor		q5, q5, q15
+2:	subne		r0, r0, r4
 	vst1.8		{q5}, [r0]!
 
-4:	next_ctr	q0
+	next_ctr	q0
 
-	subs		r5, r5, #8
+	subs		r5, r5, #128
 	bgt		99b
 
 	vst1.8		{q0}, [r6]
 	pop		{r4-r10, pc}
 
-5:	vst1.8		{q5}, [r4]
-	b		4b
+3:	adr		lr, .Lpermute_table + 16
+	cmp		r5, #16			// Z flag remains cleared
+	sub		lr, lr, r4
+	vld1.8		{q8-q9}, [lr]
+	vtbl.8		d16, {q5}, d16
+	vtbl.8		d17, {q5}, d17
+	veor		q5, q8, q15
+	bcc		4f			// have to reload prev if R5 < 16
+	vtbx.8		d10, {q2}, d18
+	vtbx.8		d11, {q2}, d19
+	mov		pc, ip			// branch back to VST sequence
+
+4:	sub		r0, r0, r4
+	vshr.s8		q9, q9, #7		// create mask for VBIF
+	vld1.8		{q8}, [r0]		// reload
+	vbif		q5, q8, q9
+	vst1.8		{q5}, [r0]
+	pop		{r4-r10, pc}
 ENDPROC(aesbs_ctr_encrypt)
 
+	.align		6
+.Lpermute_table:
+	.byte		0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+	.byte		0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+	.byte		0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07
+	.byte		0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f
+	.byte		0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+	.byte		0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+
 	.macro		next_tweak, out, in, const, tmp
 	vshr.s64	\tmp, \in, #63
 	vand		\tmp, \tmp, \const
@@ -888,6 +908,7 @@ ENDPROC(aesbs_ctr_encrypt)
 	 * aesbs_xts_decrypt(u8 out[], u8 const in[], u8 const rk[], int rounds,
 	 *		     int blocks, u8 iv[], int reorder_last_tweak)
 	 */
+	.align		6
 __xts_prepare8:
 	vld1.8		{q14}, [r7]		// load iv
 	vmov.i32	d30, #0x87		// compose tweak mask vector
diff --git a/arch/arm/crypto/aes-neonbs-glue.c b/arch/arm/crypto/aes-neonbs-glue.c
index 5c6cd3c63cbc..f00f042ef357 100644
--- a/arch/arm/crypto/aes-neonbs-glue.c
+++ b/arch/arm/crypto/aes-neonbs-glue.c
@@ -37,7 +37,7 @@ asmlinkage void aesbs_cbc_decrypt(u8 out[], u8 const in[], u8 const rk[],
 				  int rounds, int blocks, u8 iv[]);
 
 asmlinkage void aesbs_ctr_encrypt(u8 out[], u8 const in[], u8 const rk[],
-				  int rounds, int blocks, u8 ctr[], u8 final[]);
+				  int rounds, int blocks, u8 ctr[]);
 
 asmlinkage void aesbs_xts_encrypt(u8 out[], u8 const in[], u8 const rk[],
 				  int rounds, int blocks, u8 iv[], int);
@@ -243,32 +243,25 @@ static int ctr_encrypt(struct skcipher_request *req)
 	err = skcipher_walk_virt(&walk, req, false);
 
 	while (walk.nbytes > 0) {
-		unsigned int blocks = walk.nbytes / AES_BLOCK_SIZE;
-		u8 *final = (walk.total % AES_BLOCK_SIZE) ? buf : NULL;
+		const u8 *src = walk.src.virt.addr;
+		u8 *dst = walk.dst.virt.addr;
+		int bytes = walk.nbytes;
 
-		if (walk.nbytes < walk.total) {
-			blocks = round_down(blocks,
-					    walk.stride / AES_BLOCK_SIZE);
-			final = NULL;
-		}
+		if (unlikely(bytes < AES_BLOCK_SIZE))
+			src = dst = memcpy(buf + sizeof(buf) - bytes,
+					   src, bytes);
+		else if (walk.nbytes < walk.total)
+			bytes &= ~(8 * AES_BLOCK_SIZE - 1);
 
 		kernel_neon_begin();
-		aesbs_ctr_encrypt(walk.dst.virt.addr, walk.src.virt.addr,
-				  ctx->rk, ctx->rounds, blocks, walk.iv, final);
+		aesbs_ctr_encrypt(dst, src, ctx->rk, ctx->rounds, bytes, walk.iv);
 		kernel_neon_end();
 
-		if (final) {
-			u8 *dst = walk.dst.virt.addr + blocks * AES_BLOCK_SIZE;
-			u8 *src = walk.src.virt.addr + blocks * AES_BLOCK_SIZE;
+		if (unlikely(bytes < AES_BLOCK_SIZE))
+			memcpy(walk.dst.virt.addr,
+			       buf + sizeof(buf) - bytes, bytes);
 
-			crypto_xor_cpy(dst, src, final,
-				       walk.total % AES_BLOCK_SIZE);
-
-			err = skcipher_walk_done(&walk, 0);
-			break;
-		}
-		err = skcipher_walk_done(&walk,
-					 walk.nbytes - blocks * AES_BLOCK_SIZE);
+		err = skcipher_walk_done(&walk, walk.nbytes - bytes);
 	}
 
 	return err;
diff --git a/arch/arm/crypto/blake2s-shash.c b/arch/arm/crypto/blake2s-shash.c
deleted file mode 100644
index 17c1c3bfe2f5..000000000000
--- a/arch/arm/crypto/blake2s-shash.c
+++ /dev/null
@@ -1,75 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * BLAKE2s digest algorithm, ARM scalar implementation
- *
- * Copyright 2020 Google LLC
- */
-
-#include <crypto/internal/blake2s.h>
-#include <crypto/internal/hash.h>
-
-#include <linux/module.h>
-
-static int crypto_blake2s_update_arm(struct shash_desc *desc,
-				     const u8 *in, unsigned int inlen)
-{
-	return crypto_blake2s_update(desc, in, inlen, blake2s_compress);
-}
-
-static int crypto_blake2s_final_arm(struct shash_desc *desc, u8 *out)
-{
-	return crypto_blake2s_final(desc, out, blake2s_compress);
-}
-
-#define BLAKE2S_ALG(name, driver_name, digest_size)			\
-	{								\
-		.base.cra_name		= name,				\
-		.base.cra_driver_name	= driver_name,			\
-		.base.cra_priority	= 200,				\
-		.base.cra_flags		= CRYPTO_ALG_OPTIONAL_KEY,	\
-		.base.cra_blocksize	= BLAKE2S_BLOCK_SIZE,		\
-		.base.cra_ctxsize	= sizeof(struct blake2s_tfm_ctx), \
-		.base.cra_module	= THIS_MODULE,			\
-		.digestsize		= digest_size,			\
-		.setkey			= crypto_blake2s_setkey,	\
-		.init			= crypto_blake2s_init,		\
-		.update			= crypto_blake2s_update_arm,	\
-		.final			= crypto_blake2s_final_arm,	\
-		.descsize		= sizeof(struct blake2s_state),	\
-	}
-
-static struct shash_alg blake2s_arm_algs[] = {
-	BLAKE2S_ALG("blake2s-128", "blake2s-128-arm", BLAKE2S_128_HASH_SIZE),
-	BLAKE2S_ALG("blake2s-160", "blake2s-160-arm", BLAKE2S_160_HASH_SIZE),
-	BLAKE2S_ALG("blake2s-224", "blake2s-224-arm", BLAKE2S_224_HASH_SIZE),
-	BLAKE2S_ALG("blake2s-256", "blake2s-256-arm", BLAKE2S_256_HASH_SIZE),
-};
-
-static int __init blake2s_arm_mod_init(void)
-{
-	return IS_REACHABLE(CONFIG_CRYPTO_HASH) ?
-		crypto_register_shashes(blake2s_arm_algs,
-					ARRAY_SIZE(blake2s_arm_algs)) : 0;
-}
-
-static void __exit blake2s_arm_mod_exit(void)
-{
-	if (IS_REACHABLE(CONFIG_CRYPTO_HASH))
-		crypto_unregister_shashes(blake2s_arm_algs,
-					  ARRAY_SIZE(blake2s_arm_algs));
-}
-
-module_init(blake2s_arm_mod_init);
-module_exit(blake2s_arm_mod_exit);
-
-MODULE_DESCRIPTION("BLAKE2s digest algorithm, ARM scalar implementation");
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Eric Biggers <ebiggers@google.com>");
-MODULE_ALIAS_CRYPTO("blake2s-128");
-MODULE_ALIAS_CRYPTO("blake2s-128-arm");
-MODULE_ALIAS_CRYPTO("blake2s-160");
-MODULE_ALIAS_CRYPTO("blake2s-160-arm");
-MODULE_ALIAS_CRYPTO("blake2s-224");
-MODULE_ALIAS_CRYPTO("blake2s-224-arm");
-MODULE_ALIAS_CRYPTO("blake2s-256");
-MODULE_ALIAS_CRYPTO("blake2s-256-arm");
diff --git a/arch/arm/include/asm/arch_gicv3.h b/arch/arm/include/asm/arch_gicv3.h
index 413abfb42989..f82a819eb0db 100644
--- a/arch/arm/include/asm/arch_gicv3.h
+++ b/arch/arm/include/asm/arch_gicv3.h
@@ -48,6 +48,7 @@ static inline u32 read_ ## a64(void)		\
 	return read_sysreg(a32); 		\
 }						\
 
+CPUIF_MAP(ICC_EOIR1, ICC_EOIR1_EL1)
 CPUIF_MAP(ICC_PMR, ICC_PMR_EL1)
 CPUIF_MAP(ICC_AP0R0, ICC_AP0R0_EL1)
 CPUIF_MAP(ICC_AP0R1, ICC_AP0R1_EL1)
@@ -63,12 +64,6 @@ CPUIF_MAP(ICC_AP1R3, ICC_AP1R3_EL1)
 
 /* Low-level accessors */
 
-static inline void gic_write_eoir(u32 irq)
-{
-	write_sysreg(irq, ICC_EOIR1);
-	isb();
-}
-
 static inline void gic_write_dir(u32 val)
 {
 	write_sysreg(val, ICC_DIR);
diff --git a/arch/arm/include/asm/archrandom.h b/arch/arm/include/asm/archrandom.h
index a8e84ca5c2ee..cc4714eb1a75 100644
--- a/arch/arm/include/asm/archrandom.h
+++ b/arch/arm/include/asm/archrandom.h
@@ -7,4 +7,6 @@ static inline bool __init smccc_probe_trng(void)
 	return false;
 }
 
+#include <asm-generic/archrandom.h>
+
 #endif /* _ASM_ARCHRANDOM_H */
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 6fe67963ba5a..90fbe4a3f9c8 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -86,6 +86,10 @@
 
 #define IMM12_MASK 0xfff
 
+/* the frame pointer used for stack unwinding */
+ARM(	fpreg	.req	r11	)
+THUMB(	fpreg	.req	r7	)
+
 /*
  * Enable and disable interrupts
  */
@@ -107,6 +111,16 @@
 	.endm
 #endif
 
+#if __LINUX_ARM_ARCH__ < 7
+	.macro	dsb, args
+	mcr	p15, 0, r0, c7, c10, 4
+	.endm
+
+	.macro	isb, args
+	mcr	p15, 0, r0, c7, c5, 4
+	.endm
+#endif
+
 	.macro asm_trace_hardirqs_off, save=1
 #if defined(CONFIG_TRACE_IRQFLAGS)
 	.if \save
@@ -199,43 +213,12 @@
 	.endm
 	.endr
 
-	.macro	get_current, rd
-#ifdef CONFIG_CURRENT_POINTER_IN_TPIDRURO
-	mrc	p15, 0, \rd, c13, c0, 3		@ get TPIDRURO register
-#else
-	get_thread_info \rd
-	ldr	\rd, [\rd, #TI_TASK]
-#endif
-	.endm
-
-	.macro	set_current, rn
-#ifdef CONFIG_CURRENT_POINTER_IN_TPIDRURO
-	mcr	p15, 0, \rn, c13, c0, 3		@ set TPIDRURO register
-#endif
-	.endm
-
-	.macro	reload_current, t1:req, t2:req
-#ifdef CONFIG_CURRENT_POINTER_IN_TPIDRURO
-	adr_l	\t1, __entry_task		@ get __entry_task base address
-	mrc	p15, 0, \t2, c13, c0, 4		@ get per-CPU offset
-	ldr	\t1, [\t1, \t2]			@ load variable
-	mcr	p15, 0, \t1, c13, c0, 3		@ store in TPIDRURO
-#endif
-	.endm
-
 /*
  * Get current thread_info.
  */
 	.macro	get_thread_info, rd
-#ifdef CONFIG_THREAD_INFO_IN_TASK
 	/* thread_info is the first member of struct task_struct */
 	get_current \rd
-#else
- ARM(	mov	\rd, sp, lsr #THREAD_SIZE_ORDER + PAGE_SHIFT	)
- THUMB(	mov	\rd, sp			)
- THUMB(	lsr	\rd, \rd, #THREAD_SIZE_ORDER + PAGE_SHIFT	)
-	mov	\rd, \rd, lsl #THREAD_SIZE_ORDER + PAGE_SHIFT
-#endif
 	.endm
 
 /*
@@ -310,6 +293,80 @@
 #define ALT_UP_B(label) b label
 #endif
 
+	/*
+	 * this_cpu_offset - load the per-CPU offset of this CPU into
+	 * 		     register 'rd'
+	 */
+	.macro		this_cpu_offset, rd:req
+#ifdef CONFIG_SMP
+ALT_SMP(mrc		p15, 0, \rd, c13, c0, 4)
+#ifdef CONFIG_CPU_V6
+ALT_UP_B(.L1_\@)
+.L0_\@:
+	.subsection	1
+.L1_\@: ldr_va		\rd, __per_cpu_offset
+	b		.L0_\@
+	.previous
+#endif
+#else
+	mov		\rd, #0
+#endif
+	.endm
+
+	/*
+	 * set_current - store the task pointer of this CPU's current task
+	 */
+	.macro		set_current, rn:req, tmp:req
+#if defined(CONFIG_CURRENT_POINTER_IN_TPIDRURO) || defined(CONFIG_SMP)
+9998:	mcr		p15, 0, \rn, c13, c0, 3		@ set TPIDRURO register
+#ifdef CONFIG_CPU_V6
+ALT_UP_B(.L0_\@)
+	.subsection	1
+.L0_\@: str_va		\rn, __current, \tmp
+	b		.L1_\@
+	.previous
+.L1_\@:
+#endif
+#else
+	str_va		\rn, __current, \tmp
+#endif
+	.endm
+
+	/*
+	 * get_current - load the task pointer of this CPU's current task
+	 */
+	.macro		get_current, rd:req
+#if defined(CONFIG_CURRENT_POINTER_IN_TPIDRURO) || defined(CONFIG_SMP)
+9998:	mrc		p15, 0, \rd, c13, c0, 3		@ get TPIDRURO register
+#ifdef CONFIG_CPU_V6
+ALT_UP_B(.L0_\@)
+	.subsection	1
+.L0_\@: ldr_va		\rd, __current
+	b		.L1_\@
+	.previous
+.L1_\@:
+#endif
+#else
+	ldr_va		\rd, __current
+#endif
+	.endm
+
+	/*
+	 * reload_current - reload the task pointer of this CPU's current task
+	 *		    into the TLS register
+	 */
+	.macro		reload_current, t1:req, t2:req
+#if defined(CONFIG_CURRENT_POINTER_IN_TPIDRURO) || defined(CONFIG_SMP)
+#ifdef CONFIG_CPU_V6
+ALT_SMP(nop)
+ALT_UP_B(.L0_\@)
+#endif
+	ldr_this_cpu	\t1, __entry_task, \t1, \t2
+	mcr		p15, 0, \t1, c13, c0, 3		@ store in TPIDRURO
+.L0_\@:
+#endif
+	.endm
+
 /*
  * Instruction barrier
  */
@@ -566,12 +623,12 @@ THUMB(	orr	\reg , \reg , #PSR_T_BIT	)
 	/*
 	 * mov_l - move a constant value or [relocated] address into a register
 	 */
-	.macro		mov_l, dst:req, imm:req
+	.macro		mov_l, dst:req, imm:req, cond
 	.if		__LINUX_ARM_ARCH__ < 7
-	ldr		\dst, =\imm
+	ldr\cond	\dst, =\imm
 	.else
-	movw		\dst, #:lower16:\imm
-	movt		\dst, #:upper16:\imm
+	movw\cond	\dst, #:lower16:\imm
+	movt\cond	\dst, #:upper16:\imm
 	.endif
 	.endm
 
@@ -609,6 +666,84 @@ THUMB(	orr	\reg , \reg , #PSR_T_BIT	)
 	__adldst_l	str, \src, \sym, \tmp, \cond
 	.endm
 
+	.macro		__ldst_va, op, reg, tmp, sym, cond, offset
+#if __LINUX_ARM_ARCH__ >= 7 || \
+    !defined(CONFIG_ARM_HAS_GROUP_RELOCS) || \
+    (defined(MODULE) && defined(CONFIG_ARM_MODULE_PLTS))
+	mov_l		\tmp, \sym, \cond
+#else
+	/*
+	 * Avoid a literal load, by emitting a sequence of ADD/LDR instructions
+	 * with the appropriate relocations. The combined sequence has a range
+	 * of -/+ 256 MiB, which should be sufficient for the core kernel and
+	 * for modules loaded into the module region.
+	 */
+	.globl		\sym
+	.reloc		.L0_\@, R_ARM_ALU_PC_G0_NC, \sym
+	.reloc		.L1_\@, R_ARM_ALU_PC_G1_NC, \sym
+	.reloc		.L2_\@, R_ARM_LDR_PC_G2, \sym
+.L0_\@: sub\cond	\tmp, pc, #8 - \offset
+.L1_\@: sub\cond	\tmp, \tmp, #4 - \offset
+.L2_\@:
+#endif
+	\op\cond	\reg, [\tmp, #\offset]
+	.endm
+
+	/*
+	 * ldr_va - load a 32-bit word from the virtual address of \sym
+	 */
+	.macro		ldr_va, rd:req, sym:req, cond, tmp, offset=0
+	.ifnb		\tmp
+	__ldst_va	ldr, \rd, \tmp, \sym, \cond, \offset
+	.else
+	__ldst_va	ldr, \rd, \rd, \sym, \cond, \offset
+	.endif
+	.endm
+
+	/*
+	 * str_va - store a 32-bit word to the virtual address of \sym
+	 */
+	.macro		str_va, rn:req, sym:req, tmp:req, cond
+	__ldst_va	str, \rn, \tmp, \sym, \cond, 0
+	.endm
+
+	/*
+	 * ldr_this_cpu_armv6 - Load a 32-bit word from the per-CPU variable 'sym',
+	 *			without using a temp register. Supported in ARM mode
+	 *			only.
+	 */
+	.macro		ldr_this_cpu_armv6, rd:req, sym:req
+	this_cpu_offset	\rd
+	.globl		\sym
+	.reloc		.L0_\@, R_ARM_ALU_PC_G0_NC, \sym
+	.reloc		.L1_\@, R_ARM_ALU_PC_G1_NC, \sym
+	.reloc		.L2_\@, R_ARM_LDR_PC_G2, \sym
+	add		\rd, \rd, pc
+.L0_\@: sub		\rd, \rd, #4
+.L1_\@: sub		\rd, \rd, #0
+.L2_\@: ldr		\rd, [\rd, #4]
+	.endm
+
+	/*
+	 * ldr_this_cpu - Load a 32-bit word from the per-CPU variable 'sym'
+	 *		  into register 'rd', which may be the stack pointer,
+	 *		  using 't1' and 't2' as general temp registers. These
+	 *		  are permitted to overlap with 'rd' if != sp
+	 */
+	.macro		ldr_this_cpu, rd:req, sym:req, t1:req, t2:req
+#ifndef CONFIG_SMP
+	ldr_va		\rd, \sym, tmp=\t1
+#elif __LINUX_ARM_ARCH__ >= 7 || \
+      !defined(CONFIG_ARM_HAS_GROUP_RELOCS) || \
+      (defined(MODULE) && defined(CONFIG_ARM_MODULE_PLTS))
+	this_cpu_offset	\t1
+	mov_l		\t2, \sym
+	ldr		\rd, [\t1, \t2]
+#else
+	ldr_this_cpu_armv6 \rd, \sym
+#endif
+	.endm
+
 	/*
 	 * rev_l - byte-swap a 32-bit value
 	 *
@@ -626,4 +761,19 @@ THUMB(	orr	\reg , \reg , #PSR_T_BIT	)
 	.endif
 	.endm
 
+	/*
+	 * bl_r - branch and link to register
+	 *
+	 * @dst: target to branch to
+	 * @c: conditional opcode suffix
+	 */
+	.macro		bl_r, dst:req, c
+	.if		__LINUX_ARM_ARCH__ < 6
+	mov\c		lr, pc
+	mov\c		pc, \dst
+	.else
+	blx\c		\dst
+	.endif
+	.endm
+
 #endif /* __ASM_ASSEMBLER_H__ */
diff --git a/arch/arm/include/asm/bitops.h b/arch/arm/include/asm/bitops.h
index 8e94fe7ab5eb..714440fa2fc6 100644
--- a/arch/arm/include/asm/bitops.h
+++ b/arch/arm/include/asm/bitops.h
@@ -160,18 +160,20 @@ extern int _test_and_change_bit(int nr, volatile unsigned long * p);
 /*
  * Little endian assembly bitops.  nr = 0 -> byte 0 bit 0.
  */
-extern int _find_first_zero_bit_le(const unsigned long *p, unsigned size);
-extern int _find_next_zero_bit_le(const unsigned long *p, int size, int offset);
-extern int _find_first_bit_le(const unsigned long *p, unsigned size);
-extern int _find_next_bit_le(const unsigned long *p, int size, int offset);
+unsigned long _find_first_zero_bit_le(const unsigned long *p, unsigned long size);
+unsigned long _find_next_zero_bit_le(const unsigned long *p,
+				     unsigned long size, unsigned long offset);
+unsigned long _find_first_bit_le(const unsigned long *p, unsigned long size);
+unsigned long _find_next_bit_le(const unsigned long *p, unsigned long size, unsigned long offset);
 
 /*
  * Big endian assembly bitops.  nr = 0 -> byte 3 bit 0.
  */
-extern int _find_first_zero_bit_be(const unsigned long *p, unsigned size);
-extern int _find_next_zero_bit_be(const unsigned long *p, int size, int offset);
-extern int _find_first_bit_be(const unsigned long *p, unsigned size);
-extern int _find_next_bit_be(const unsigned long *p, int size, int offset);
+unsigned long _find_first_zero_bit_be(const unsigned long *p, unsigned long size);
+unsigned long _find_next_zero_bit_be(const unsigned long *p,
+				     unsigned long size, unsigned long offset);
+unsigned long _find_first_bit_be(const unsigned long *p, unsigned long size);
+unsigned long _find_next_bit_be(const unsigned long *p, unsigned long size, unsigned long offset);
 
 #ifndef CONFIG_SMP
 /*
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index 5e56288e343b..a094f964c869 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -445,15 +445,10 @@ static inline void __sync_cache_range_r(volatile void *p, size_t size)
  *   however some exceptions may exist.  Caveat emptor.
  *
  * - The clobber list is dictated by the call to v7_flush_dcache_*.
- *   fp is preserved to the stack explicitly prior disabling the cache
- *   since adding it to the clobber list is incompatible with having
- *   CONFIG_FRAME_POINTER=y.  ip is saved as well if ever r12-clobbering
- *   trampoline are inserted by the linker and to keep sp 64-bit aligned.
  */
 #define v7_exit_coherency_flush(level) \
 	asm volatile( \
 	".arch	armv7-a \n\t" \
-	"stmfd	sp!, {fp, ip} \n\t" \
 	"mrc	p15, 0, r0, c1, c0, 0	@ get SCTLR \n\t" \
 	"bic	r0, r0, #"__stringify(CR_C)" \n\t" \
 	"mcr	p15, 0, r0, c1, c0, 0	@ set SCTLR \n\t" \
@@ -463,10 +458,9 @@ static inline void __sync_cache_range_r(volatile void *p, size_t size)
 	"bic	r0, r0, #(1 << 6)	@ disable local coherency \n\t" \
 	"mcr	p15, 0, r0, c1, c0, 1	@ set ACTLR \n\t" \
 	"isb	\n\t" \
-	"dsb	\n\t" \
-	"ldmfd	sp!, {fp, ip}" \
-	: : : "r0","r1","r2","r3","r4","r5","r6","r7", \
-	      "r9","r10","lr","memory" )
+	"dsb" \
+	: : : "r0","r1","r2","r3","r4","r5","r6", \
+	      "r9","r10","ip","lr","memory" )
 
 void flush_uprobe_xol_access(struct page *page, unsigned long uaddr,
 			     void *kaddr, unsigned long len);
diff --git a/arch/arm/include/asm/current.h b/arch/arm/include/asm/current.h
index 6bf0aad672c3..1e1178bf176d 100644
--- a/arch/arm/include/asm/current.h
+++ b/arch/arm/include/asm/current.h
@@ -8,25 +8,18 @@
 #define _ASM_ARM_CURRENT_H
 
 #ifndef __ASSEMBLY__
+#include <asm/insn.h>
 
 struct task_struct;
 
-static inline void set_current(struct task_struct *cur)
-{
-	if (!IS_ENABLED(CONFIG_CURRENT_POINTER_IN_TPIDRURO))
-		return;
-
-	/* Set TPIDRURO */
-	asm("mcr p15, 0, %0, c13, c0, 3" :: "r"(cur) : "memory");
-}
-
-#ifdef CONFIG_CURRENT_POINTER_IN_TPIDRURO
+extern struct task_struct *__current;
 
-static inline struct task_struct *get_current(void)
+static __always_inline __attribute_const__ struct task_struct *get_current(void)
 {
 	struct task_struct *cur;
 
 #if __has_builtin(__builtin_thread_pointer) && \
+    defined(CONFIG_CURRENT_POINTER_IN_TPIDRURO) && \
     !(defined(CONFIG_THUMB2_KERNEL) && \
       defined(CONFIG_CC_IS_CLANG) && CONFIG_CLANG_VERSION < 130001)
 	/*
@@ -39,16 +32,39 @@ static inline struct task_struct *get_current(void)
 	 * https://github.com/ClangBuiltLinux/linux/issues/1485
 	 */
 	cur = __builtin_thread_pointer();
+#elif defined(CONFIG_CURRENT_POINTER_IN_TPIDRURO) || defined(CONFIG_SMP)
+	asm("0:	mrc p15, 0, %0, c13, c0, 3			\n\t"
+#ifdef CONFIG_CPU_V6
+	    "1:							\n\t"
+	    "	.subsection 1					\n\t"
+#if defined(CONFIG_ARM_HAS_GROUP_RELOCS) && \
+    !(defined(MODULE) && defined(CONFIG_ARM_MODULE_PLTS))
+	    "2: " LOAD_SYM_ARMV6(%0, __current) "		\n\t"
+	    "	b	1b					\n\t"
 #else
-	asm("mrc p15, 0, %0, c13, c0, 3" : "=r"(cur));
+	    "2:	ldr	%0, 3f					\n\t"
+	    "	ldr	%0, [%0]				\n\t"
+	    "	b	1b					\n\t"
+	    "3:	.long	__current				\n\t"
+#endif
+	    "	.previous					\n\t"
+	    "	.pushsection \".alt.smp.init\", \"a\"		\n\t"
+	    "	.long	0b - .					\n\t"
+	    "	b	. + (2b - 0b)				\n\t"
+	    "	.popsection					\n\t"
+#endif
+	    : "=r"(cur));
+#elif __LINUX_ARM_ARCH__>= 7 || \
+      !defined(CONFIG_ARM_HAS_GROUP_RELOCS) || \
+      (defined(MODULE) && defined(CONFIG_ARM_MODULE_PLTS))
+	cur = __current;
+#else
+	asm(LOAD_SYM_ARMV6(%0, __current) : "=r"(cur));
 #endif
 	return cur;
 }
 
 #define current get_current()
-#else
-#include <asm-generic/current.h>
-#endif /* CONFIG_CURRENT_POINTER_IN_TPIDRURO */
 
 #endif /* __ASSEMBLY__ */
 
diff --git a/arch/arm/include/asm/device.h b/arch/arm/include/asm/device.h
index be666f58bf7a..c6beb1708c64 100644
--- a/arch/arm/include/asm/device.h
+++ b/arch/arm/include/asm/device.h
@@ -6,13 +6,9 @@
 #define ASMARM_DEVICE_H
 
 struct dev_archdata {
-#ifdef CONFIG_DMABOUNCE
-	struct dmabounce_device_info *dmabounce;
-#endif
 #ifdef CONFIG_ARM_DMA_USE_IOMMU
 	struct dma_iommu_mapping	*mapping;
 #endif
-	unsigned int dma_coherent:1;
 	unsigned int dma_ops_setup:1;
 };
 
diff --git a/arch/arm/include/asm/dma-direct.h b/arch/arm/include/asm/dma-direct.h
deleted file mode 100644
index 77fcb7ee5ec9..000000000000
--- a/arch/arm/include/asm/dma-direct.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef ASM_ARM_DMA_DIRECT_H
-#define ASM_ARM_DMA_DIRECT_H 1
-
-#include <asm/memory.h>
-
-/*
- * dma_to_pfn/pfn_to_dma/virt_to_dma are architecture private
- * functions used internally by the DMA-mapping API to provide DMA
- * addresses. They must not be used by drivers.
- */
-static inline dma_addr_t pfn_to_dma(struct device *dev, unsigned long pfn)
-{
-	if (dev && dev->dma_range_map)
-		pfn = PFN_DOWN(translate_phys_to_dma(dev, PFN_PHYS(pfn)));
-	return (dma_addr_t)__pfn_to_bus(pfn);
-}
-
-static inline unsigned long dma_to_pfn(struct device *dev, dma_addr_t addr)
-{
-	unsigned long pfn = __bus_to_pfn(addr);
-
-	if (dev && dev->dma_range_map)
-		pfn = PFN_DOWN(translate_dma_to_phys(dev, PFN_PHYS(pfn)));
-	return pfn;
-}
-
-static inline dma_addr_t virt_to_dma(struct device *dev, void *addr)
-{
-	if (dev)
-		return pfn_to_dma(dev, virt_to_pfn(addr));
-
-	return (dma_addr_t)__virt_to_bus((unsigned long)(addr));
-}
-
-static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
-{
-	unsigned int offset = paddr & ~PAGE_MASK;
-	return pfn_to_dma(dev, __phys_to_pfn(paddr)) + offset;
-}
-
-static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t dev_addr)
-{
-	unsigned int offset = dev_addr & ~PAGE_MASK;
-	return __pfn_to_phys(dma_to_pfn(dev, dev_addr)) + offset;
-}
-
-#endif /* ASM_ARM_DMA_DIRECT_H */
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
deleted file mode 100644
index 77082246a5e1..000000000000
--- a/arch/arm/include/asm/dma-mapping.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef ASMARM_DMA_MAPPING_H
-#define ASMARM_DMA_MAPPING_H
-
-#ifdef __KERNEL__
-
-#include <linux/mm_types.h>
-#include <linux/scatterlist.h>
-
-#include <xen/xen.h>
-#include <asm/xen/hypervisor.h>
-
-extern const struct dma_map_ops arm_dma_ops;
-extern const struct dma_map_ops arm_coherent_dma_ops;
-
-static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
-{
-	if (IS_ENABLED(CONFIG_MMU) && !IS_ENABLED(CONFIG_ARM_LPAE))
-		return &arm_dma_ops;
-	return NULL;
-}
-
-/**
- * arm_dma_alloc - allocate consistent memory for DMA
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @size: required memory size
- * @handle: bus-specific DMA address
- * @attrs: optinal attributes that specific mapping properties
- *
- * Allocate some memory for a device for performing DMA.  This function
- * allocates pages, and will return the CPU-viewed address, and sets @handle
- * to be the device-viewed address.
- */
-extern void *arm_dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
-			   gfp_t gfp, unsigned long attrs);
-
-/**
- * arm_dma_free - free memory allocated by arm_dma_alloc
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @size: size of memory originally requested in dma_alloc_coherent
- * @cpu_addr: CPU-view address returned from dma_alloc_coherent
- * @handle: device-view address returned from dma_alloc_coherent
- * @attrs: optinal attributes that specific mapping properties
- *
- * Free (and unmap) a DMA buffer previously allocated by
- * arm_dma_alloc().
- *
- * References to memory and mappings associated with cpu_addr/handle
- * during and after this call executing are illegal.
- */
-extern void arm_dma_free(struct device *dev, size_t size, void *cpu_addr,
-			 dma_addr_t handle, unsigned long attrs);
-
-/**
- * arm_dma_mmap - map a coherent DMA allocation into user space
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @vma: vm_area_struct describing requested user mapping
- * @cpu_addr: kernel CPU-view address returned from dma_alloc_coherent
- * @handle: device-view address returned from dma_alloc_coherent
- * @size: size of memory originally requested in dma_alloc_coherent
- * @attrs: optinal attributes that specific mapping properties
- *
- * Map a coherent DMA buffer previously allocated by dma_alloc_coherent
- * into user space.  The coherent DMA buffer must not be freed by the
- * driver until the user space mapping has been released.
- */
-extern int arm_dma_mmap(struct device *dev, struct vm_area_struct *vma,
-			void *cpu_addr, dma_addr_t dma_addr, size_t size,
-			unsigned long attrs);
-
-/*
- * For SA-1111, IXP425, and ADI systems  the dma-mapping functions are "magic"
- * and utilize bounce buffers as needed to work around limited DMA windows.
- *
- * On the SA-1111, a bug limits DMA to only certain regions of RAM.
- * On the IXP425, the PCI inbound window is 64MB (256MB total RAM)
- * On some ADI engineering systems, PCI inbound window is 32MB (12MB total RAM)
- *
- * The following are helper functions used by the dmabounce subystem
- *
- */
-
-/**
- * dmabounce_register_dev
- *
- * @dev: valid struct device pointer
- * @small_buf_size: size of buffers to use with small buffer pool
- * @large_buf_size: size of buffers to use with large buffer pool (can be 0)
- * @needs_bounce_fn: called to determine whether buffer needs bouncing
- *
- * This function should be called by low-level platform code to register
- * a device as requireing DMA buffer bouncing. The function will allocate
- * appropriate DMA pools for the device.
- */
-extern int dmabounce_register_dev(struct device *, unsigned long,
-		unsigned long, int (*)(struct device *, dma_addr_t, size_t));
-
-/**
- * dmabounce_unregister_dev
- *
- * @dev: valid struct device pointer
- *
- * This function should be called by low-level platform code when device
- * that was previously registered with dmabounce_register_dev is removed
- * from the system.
- *
- */
-extern void dmabounce_unregister_dev(struct device *);
-
-
-
-/*
- * The scatter list versions of the above methods.
- */
-extern int arm_dma_map_sg(struct device *, struct scatterlist *, int,
-		enum dma_data_direction, unsigned long attrs);
-extern void arm_dma_unmap_sg(struct device *, struct scatterlist *, int,
-		enum dma_data_direction, unsigned long attrs);
-extern void arm_dma_sync_sg_for_cpu(struct device *, struct scatterlist *, int,
-		enum dma_data_direction);
-extern void arm_dma_sync_sg_for_device(struct device *, struct scatterlist *, int,
-		enum dma_data_direction);
-extern int arm_dma_get_sgtable(struct device *dev, struct sg_table *sgt,
-		void *cpu_addr, dma_addr_t dma_addr, size_t size,
-		unsigned long attrs);
-
-#endif /* __KERNEL__ */
-#endif
diff --git a/arch/arm/include/asm/dma.h b/arch/arm/include/asm/dma.h
index a81dda65c576..c6aded1b069c 100644
--- a/arch/arm/include/asm/dma.h
+++ b/arch/arm/include/asm/dma.h
@@ -10,7 +10,7 @@
 #else
 #define MAX_DMA_ADDRESS	({ \
 	extern phys_addr_t arm_dma_zone_size; \
-	arm_dma_zone_size && arm_dma_zone_size < (0x10000000 - PAGE_OFFSET) ? \
+	arm_dma_zone_size && arm_dma_zone_size < (0x100000000ULL - PAGE_OFFSET) ? \
 		(PAGE_OFFSET + arm_dma_zone_size) : 0xffffffffUL; })
 #endif
 
@@ -106,7 +106,7 @@ extern void set_dma_sg(unsigned int chan, struct scatterlist *sg, int nr_sg);
  */
 extern void __set_dma_addr(unsigned int chan, void *addr);
 #define set_dma_addr(chan, addr)				\
-	__set_dma_addr(chan, (void *)__bus_to_virt(addr))
+	__set_dma_addr(chan, (void *)isa_bus_to_virt(addr))
 
 /* Set the DMA byte count for this channel
  *
@@ -143,10 +143,4 @@ extern int  get_dma_residue(unsigned int chan);
 
 #endif /* CONFIG_ISA_DMA_API */
 
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy    (0)
-#endif
-
 #endif /* __ASM_ARM_DMA_H */
diff --git a/arch/arm/include/asm/domain.h b/arch/arm/include/asm/domain.h
index f1d0a7807cd0..41536feb4392 100644
--- a/arch/arm/include/asm/domain.h
+++ b/arch/arm/include/asm/domain.h
@@ -112,19 +112,6 @@ static __always_inline void set_domain(unsigned int val)
 }
 #endif
 
-#ifdef CONFIG_CPU_USE_DOMAINS
-#define modify_domain(dom,type)					\
-	do {							\
-		unsigned int domain = get_domain();		\
-		domain &= ~domain_mask(dom);			\
-		domain = domain | domain_val(dom, type);	\
-		set_domain(domain);				\
-	} while (0)
-
-#else
-static inline void modify_domain(unsigned dom, unsigned type)	{ }
-#endif
-
 /*
  * Generate the T (user) versions of the LDR/STR and related
  * instructions (inline assembly)
diff --git a/arch/arm/include/asm/efi.h b/arch/arm/include/asm/efi.h
index 27218eabbf9a..4bdd930167c0 100644
--- a/arch/arm/include/asm/efi.h
+++ b/arch/arm/include/asm/efi.h
@@ -17,6 +17,7 @@
 
 #ifdef CONFIG_EFI
 void efi_init(void);
+void arm_efi_init(void);
 
 int efi_create_mapping(struct mm_struct *mm, efi_memory_desc_t *md);
 int efi_set_mapping_permissions(struct mm_struct *mm, efi_memory_desc_t *md);
@@ -24,13 +25,6 @@ int efi_set_mapping_permissions(struct mm_struct *mm, efi_memory_desc_t *md);
 #define arch_efi_call_virt_setup()	efi_virtmap_load()
 #define arch_efi_call_virt_teardown()	efi_virtmap_unload()
 
-#define arch_efi_call_virt(p, f, args...)				\
-({									\
-	efi_##f##_t *__f;						\
-	__f = p->f;							\
-	__f(args);							\
-})
-
 #define ARCH_EFI_IRQ_FLAGS_MASK \
 	(PSR_J_BIT | PSR_E_BIT | PSR_A_BIT | PSR_I_BIT | PSR_F_BIT | \
 	 PSR_T_BIT | MODE_MASK)
@@ -44,7 +38,7 @@ void efi_virtmap_load(void);
 void efi_virtmap_unload(void);
 
 #else
-#define efi_init()
+#define arm_efi_init()
 #endif /* CONFIG_EFI */
 
 /* arch specific definitions used by the stub code */
diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index b8102a6ddf16..d68101655b74 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -61,6 +61,9 @@ typedef struct user_fp elf_fpregset_t;
 #define R_ARM_MOVT_ABS		44
 #define R_ARM_MOVW_PREL_NC	45
 #define R_ARM_MOVT_PREL		46
+#define R_ARM_ALU_PC_G0_NC	57
+#define R_ARM_ALU_PC_G1_NC	59
+#define R_ARM_LDR_PC_G2		63
 
 #define R_ARM_THM_CALL		10
 #define R_ARM_THM_JUMP24	30
diff --git a/arch/arm/include/asm/entry-macro-multi.S b/arch/arm/include/asm/entry-macro-multi.S
deleted file mode 100644
index dfc6bfa43012..000000000000
--- a/arch/arm/include/asm/entry-macro-multi.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <asm/assembler.h>
-
-/*
- * Interrupt handling.  Preserves r7, r8, r9
- */
-	.macro	arch_irq_handler_default
-	get_irqnr_preamble r6, lr
-1:	get_irqnr_and_base r0, r2, r6, lr
-	movne	r1, sp
-	@
-	@ routine called with r0 = irq number, r1 = struct pt_regs *
-	@
-	badrne	lr, 1b
-	bne	asm_do_IRQ
-
-#ifdef CONFIG_SMP
-	/*
-	 * XXX
-	 *
-	 * this macro assumes that irqstat (r2) and base (r6) are
-	 * preserved from get_irqnr_and_base above
-	 */
-	ALT_SMP(test_for_ipi r0, r2, r6, lr)
-	ALT_UP_B(9997f)
-	movne	r1, sp
-	badrne	lr, 1b
-	bne	do_IPI
-#endif
-9997:
-	.endm
-
-	.macro	arch_irq_handler, symbol_name
-	.align	5
-	.global \symbol_name
-\symbol_name:
-	mov	r8, lr
-	arch_irq_handler_default
-	ret	r8
-	.endm
diff --git a/arch/arm/include/asm/fpstate.h b/arch/arm/include/asm/fpstate.h
index ca42fd9ae0b3..e29d9c7a5238 100644
--- a/arch/arm/include/asm/fpstate.h
+++ b/arch/arm/include/asm/fpstate.h
@@ -46,9 +46,6 @@ union vfp_state {
 	struct vfp_hard_struct	hard;
 };
 
-extern void vfp_flush_thread(union vfp_state *);
-extern void vfp_release_thread(union vfp_state *);
-
 #define FP_HARD_SIZE 35
 
 struct fp_hard_struct {
diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h
index a4dbac07e4ef..7e9251ca29fe 100644
--- a/arch/arm/include/asm/ftrace.h
+++ b/arch/arm/include/asm/ftrace.h
@@ -2,6 +2,8 @@
 #ifndef _ASM_ARM_FTRACE
 #define _ASM_ARM_FTRACE
 
+#define HAVE_FUNCTION_GRAPH_FP_TEST
+
 #ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
 #define ARCH_SUPPORTS_FTRACE_OPS 1
 #endif
@@ -48,7 +50,7 @@ void *return_address(unsigned int);
 
 static inline void *return_address(unsigned int level)
 {
-	return NULL;
+       return NULL;
 }
 
 #endif
diff --git a/arch/arm/include/asm/hardware/cache-aurora-l2.h b/arch/arm/include/asm/hardware/cache-aurora-l2.h
index 39769ffa0051..9694808ee97c 100644
--- a/arch/arm/include/asm/hardware/cache-aurora-l2.h
+++ b/arch/arm/include/asm/hardware/cache-aurora-l2.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * AURORA shared L2 cache controller support
  *
@@ -5,10 +6,6 @@
  *
  * Yehuda Yitschak <yehuday@marvell.com>
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #ifndef __ASM_ARM_HARDWARE_AURORA_L2_H
diff --git a/arch/arm/include/asm/hardware/cache-feroceon-l2.h b/arch/arm/include/asm/hardware/cache-feroceon-l2.h
index 12e1588dc4f1..eb2e7b7f70a8 100644
--- a/arch/arm/include/asm/hardware/cache-feroceon-l2.h
+++ b/arch/arm/include/asm/hardware/cache-feroceon-l2.h
@@ -1,13 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * arch/arm/include/asm/hardware/cache-feroceon-l2.h
  *
  * Copyright (C) 2008 Marvell Semiconductor
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 extern void __init feroceon_l2_init(int l2_wt_override);
 extern int __init feroceon_of_init(void);
-
diff --git a/arch/arm/include/asm/hardware/cache-tauros2.h b/arch/arm/include/asm/hardware/cache-tauros2.h
index 295e2e40151b..4e493facaa31 100644
--- a/arch/arm/include/asm/hardware/cache-tauros2.h
+++ b/arch/arm/include/asm/hardware/cache-tauros2.h
@@ -1,11 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * arch/arm/include/asm/hardware/cache-tauros2.h
  *
  * Copyright (C) 2008 Marvell Semiconductor
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #define CACHE_TAUROS2_PREFETCH_ON	(1 << 0)
diff --git a/arch/arm/include/asm/hardware/dec21285.h b/arch/arm/include/asm/hardware/dec21285.h
index 3f18a56a025d..894f2a635cbb 100644
--- a/arch/arm/include/asm/hardware/dec21285.h
+++ b/arch/arm/include/asm/hardware/dec21285.h
@@ -22,6 +22,13 @@
 #define DC21285_IO(x)		(x)
 #endif
 
+/*
+ * The footbridge is programmed to expose the system RAM at 0xe0000000.
+ * The requirement is that the RAM isn't placed at bus address 0, which
+ * would clash with VGA cards.
+ */
+#define BUS_OFFSET 0xe0000000
+
 #define CSR_PCICMD		DC21285_IO(0x0004)
 #define CSR_CLASSREV		DC21285_IO(0x0008)
 #define CSR_PCICACHELINESIZE	DC21285_IO(0x000c)
@@ -81,19 +88,6 @@
 #define SA110_CNTL_XCSDIR(x)		((x)<<28)
 #define SA110_CNTL_PCICFN		(1 << 31)
 
-/*
- * footbridge_cfn_mode() is used when we want
- * to check whether we are the central function
- */
-#define __footbridge_cfn_mode() (*CSR_SA110_CNTL & SA110_CNTL_PCICFN)
-#if defined(CONFIG_FOOTBRIDGE_HOST) && defined(CONFIG_FOOTBRIDGE_ADDIN)
-#define footbridge_cfn_mode() __footbridge_cfn_mode()
-#elif defined(CONFIG_FOOTBRIDGE_HOST)
-#define footbridge_cfn_mode() (1)
-#else
-#define footbridge_cfn_mode() (0)
-#endif
-
 #define CSR_PCIADDR_EXTN	DC21285_IO(0x0140)
 #define CSR_PREFETCHMEMRANGE	DC21285_IO(0x0144)
 #define CSR_XBUS_CYCLE		DC21285_IO(0x0148)
diff --git a/arch/arm/include/asm/hardware/entry-macro-iomd.S b/arch/arm/include/asm/hardware/entry-macro-iomd.S
deleted file mode 100644
index f7692731e514..000000000000
--- a/arch/arm/include/asm/hardware/entry-macro-iomd.S
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * arch/arm/include/asm/hardware/entry-macro-iomd.S
- *
- * Low-level IRQ helper macros for IOC/IOMD based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/* IOC / IOMD based hardware */
-#include <asm/hardware/iomd.h>
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldrb	\irqstat, [\base, #IOMD_IRQREQB]	@ get high priority first
-		ldr	\tmp, =irq_prio_h
-		teq	\irqstat, #0
-#ifdef IOMD_BASE
-		ldrbeq	\irqstat, [\base, #IOMD_DMAREQ]	@ get dma
-		addeq	\tmp, \tmp, #256		@ irq_prio_h table size
-		teqeq	\irqstat, #0
-		bne	2406f
-#endif
-		ldrbeq	\irqstat, [\base, #IOMD_IRQREQA]	@ get low priority
-		addeq	\tmp, \tmp, #256		@ irq_prio_d table size
-		teqeq	\irqstat, #0
-#ifdef IOMD_IRQREQC
-		ldrbeq	\irqstat, [\base, #IOMD_IRQREQC]
-		addeq	\tmp, \tmp, #256		@ irq_prio_l table size
-		teqeq	\irqstat, #0
-#endif
-#ifdef IOMD_IRQREQD
-		ldrbeq	\irqstat, [\base, #IOMD_IRQREQD]
-		addeq	\tmp, \tmp, #256		@ irq_prio_lc table size
-		teqeq	\irqstat, #0
-#endif
-2406:		ldrbne	\irqnr, [\tmp, \irqstat]	@ get IRQ number
-		.endm
-
-/*
- * Interrupt table (incorporates priority).  Please note that we
- * rely on the order of these tables (see above code).
- */
-		.align	5
-irq_prio_h:	.byte	 0, 8, 9, 8,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	12, 8, 9, 8,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	14,14,14,14,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	14,14,14,14,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
-#ifdef IOMD_BASE
-irq_prio_d:	.byte	 0,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	20,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	23,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	23,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-#endif
-irq_prio_l:	.byte	 0, 0, 1, 0, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3
-		.byte	 4, 0, 1, 0, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3
-		.byte	 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5
-		.byte	 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5
-		.byte	 6, 6, 6, 6, 6, 6, 6, 6, 3, 3, 3, 3, 3, 3, 3, 3
-		.byte	 6, 6, 6, 6, 6, 6, 6, 6, 3, 3, 3, 3, 3, 3, 3, 3
-		.byte	 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5
-		.byte	 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5
-		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
-		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
-		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
-		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
-		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
-		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
-		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
-		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
-#ifdef IOMD_IRQREQC
-irq_prio_lc:	.byte	24,24,25,24,26,26,26,26,27,27,27,27,27,27,27,27
-		.byte	28,24,25,24,26,26,26,26,27,27,27,27,27,27,27,27
-		.byte	29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29
-		.byte	29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29
-		.byte	30,30,30,30,30,30,30,30,27,27,27,27,27,27,27,27
-		.byte	30,30,30,30,30,30,30,30,27,27,27,27,27,27,27,27
-		.byte	29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29
-		.byte	29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29
-		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
-		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
-		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
-		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
-		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
-		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
-		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
-		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
-#endif
-#ifdef IOMD_IRQREQD
-irq_prio_ld:	.byte	40,40,41,40,42,42,42,42,43,43,43,43,43,43,43,43
-		.byte	44,40,41,40,42,42,42,42,43,43,43,43,43,43,43,43
-		.byte	45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45
-		.byte	45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45
-		.byte	46,46,46,46,46,46,46,46,43,43,43,43,43,43,43,43
-		.byte	46,46,46,46,46,46,46,46,43,43,43,43,43,43,43,43
-		.byte	45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45
-		.byte	45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45
-		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
-		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
-		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
-		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
-		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
-		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
-		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
-		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
-#endif
-
diff --git a/arch/arm/include/asm/hardware/sa1111.h b/arch/arm/include/asm/hardware/sa1111.h
index 2e70db6f22ea..d8c6f8a99dfa 100644
--- a/arch/arm/include/asm/hardware/sa1111.h
+++ b/arch/arm/include/asm/hardware/sa1111.h
@@ -13,8 +13,6 @@
 #ifndef _ASM_ARCH_SA1111
 #define _ASM_ARCH_SA1111
 
-#include <mach/bitfield.h>
-
 /*
  * Don't ask the (SAC) DMA engines to move less than this amount.
  */
diff --git a/arch/arm/include/asm/insn.h b/arch/arm/include/asm/insn.h
index 5475cbf9fb6b..faf3d1c28368 100644
--- a/arch/arm/include/asm/insn.h
+++ b/arch/arm/include/asm/insn.h
@@ -2,6 +2,23 @@
 #ifndef __ASM_ARM_INSN_H
 #define __ASM_ARM_INSN_H
 
+#include <linux/types.h>
+
+/*
+ * Avoid a literal load by emitting a sequence of ADD/LDR instructions with the
+ * appropriate relocations. The combined sequence has a range of -/+ 256 MiB,
+ * which should be sufficient for the core kernel as well as modules loaded
+ * into the module region. (Not supported by LLD before release 14)
+ */
+#define LOAD_SYM_ARMV6(reg, sym)					\
+	"	.globl	" #sym "				\n\t"	\
+	"	.reloc	10f, R_ARM_ALU_PC_G0_NC, " #sym "	\n\t"	\
+	"	.reloc	11f, R_ARM_ALU_PC_G1_NC, " #sym "	\n\t"	\
+	"	.reloc	12f, R_ARM_LDR_PC_G2, " #sym "		\n\t"	\
+	"10:	sub	" #reg ", pc, #8			\n\t"	\
+	"11:	sub	" #reg ", " #reg ", #4			\n\t"	\
+	"12:	ldr	" #reg ", [" #reg ", #0]		\n\t"
+
 static inline unsigned long
 arm_gen_nop(void)
 {
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index 0c70eb688a00..7fcdc785366c 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -139,11 +139,9 @@ extern void __iomem *__arm_ioremap_caller(phys_addr_t, size_t, unsigned int,
 extern void __iomem *__arm_ioremap_pfn(unsigned long, unsigned long, size_t, unsigned int);
 extern void __iomem *__arm_ioremap_exec(phys_addr_t, size_t, bool cached);
 void __arm_iomem_set_ro(void __iomem *ptr, size_t size);
-extern void __iounmap(volatile void __iomem *addr);
 
 extern void __iomem * (*arch_ioremap_caller)(phys_addr_t, size_t,
 	unsigned int, void *);
-extern void (*arch_iounmap)(volatile void __iomem *);
 
 /*
  * Bad read/write accesses...
@@ -174,7 +172,7 @@ static inline void __iomem *__typesafe_io(unsigned long addr)
 #define PCI_IO_VIRT_BASE	0xfee00000
 #define PCI_IOBASE		((void __iomem *)PCI_IO_VIRT_BASE)
 
-#if defined(CONFIG_PCI)
+#if defined(CONFIG_PCI) || IS_ENABLED(CONFIG_PCMCIA)
 void pci_ioremap_set_mem_type(int mem_type);
 #else
 static inline void pci_ioremap_set_mem_type(int mem_type) {}
@@ -200,32 +198,13 @@ void __iomem *pci_remap_cfgspace(resource_size_t res_cookie, size_t size);
  */
 #ifdef CONFIG_NEED_MACH_IO_H
 #include <mach/io.h>
-#elif defined(CONFIG_PCI)
-#define IO_SPACE_LIMIT	((resource_size_t)0xfffff)
-#define __io(a)		__typesafe_io(PCI_IO_VIRT_BASE + ((a) & IO_SPACE_LIMIT))
 #else
-#define __io(a)		__typesafe_io((a) & IO_SPACE_LIMIT)
-#endif
-
-/*
- * This is the limit of PC card/PCI/ISA IO space, which is by default
- * 64K if we have PC card, PCI or ISA support.  Otherwise, default to
- * zero to prevent ISA/PCI drivers claiming IO space (and potentially
- * oopsing.)
- *
- * Only set this larger if you really need inb() et.al. to operate over
- * a larger address space.  Note that SOC_COMMON ioremaps each sockets
- * IO space area, and so inb() et.al. must be defined to operate as per
- * readb() et.al. on such platforms.
- */
-#ifndef IO_SPACE_LIMIT
-#if defined(CONFIG_PCMCIA_SOC_COMMON) || defined(CONFIG_PCMCIA_SOC_COMMON_MODULE)
-#define IO_SPACE_LIMIT ((resource_size_t)0xffffffff)
-#elif defined(CONFIG_PCI) || defined(CONFIG_ISA) || defined(CONFIG_PCCARD)
-#define IO_SPACE_LIMIT ((resource_size_t)0xffff)
+#if IS_ENABLED(CONFIG_PCMCIA) || defined(CONFIG_PCI)
+#define IO_SPACE_LIMIT	((resource_size_t)0xfffff)
 #else
 #define IO_SPACE_LIMIT ((resource_size_t)0)
 #endif
+#define __io(a)		__typesafe_io(PCI_IO_VIRT_BASE + ((a) & IO_SPACE_LIMIT))
 #endif
 
 /*
@@ -399,7 +378,7 @@ void __iomem *ioremap_wc(resource_size_t res_cookie, size_t size);
 #define ioremap_wc ioremap_wc
 #define ioremap_wt ioremap_wc
 
-void iounmap(volatile void __iomem *iomem_cookie);
+void iounmap(volatile void __iomem *io_addr);
 #define iounmap iounmap
 
 void *arch_memremap_wb(phys_addr_t phys_addr, size_t size);
@@ -440,6 +419,9 @@ extern void pci_iounmap(struct pci_dev *dev, void __iomem *addr);
 #define ARCH_HAS_VALID_PHYS_ADDR_RANGE
 extern int valid_phys_addr_range(phys_addr_t addr, size_t size);
 extern int valid_mmap_phys_addr_range(unsigned long pfn, size_t size);
+extern bool arch_memremap_can_ram_remap(resource_size_t offset, size_t size,
+					unsigned long flags);
+#define arch_memremap_can_ram_remap arch_memremap_can_ram_remap
 #endif
 
 /*
diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h
index 1cbcc462b07e..a7c2337b0c7d 100644
--- a/arch/arm/include/asm/irq.h
+++ b/arch/arm/include/asm/irq.h
@@ -26,7 +26,6 @@
 struct irqaction;
 struct pt_regs;
 
-extern void asm_do_IRQ(unsigned int, struct pt_regs *);
 void handle_IRQ(unsigned int, struct pt_regs *);
 void init_IRQ(void);
 
diff --git a/arch/arm/include/asm/irq_work.h b/arch/arm/include/asm/irq_work.h
index 8895999834cc..3149e4dc1b54 100644
--- a/arch/arm/include/asm/irq_work.h
+++ b/arch/arm/include/asm/irq_work.h
@@ -9,4 +9,6 @@ static inline bool arch_irq_work_has_interrupt(void)
 	return is_smp();
 }
 
+extern void arch_irq_work_raise(void);
+
 #endif /* _ASM_ARM_IRQ_WORK_H */
diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index eec0c0bda766..9349e7a82c9c 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -56,9 +56,7 @@ struct machine_desc {
 	void			(*init_time)(void);
 	void			(*init_machine)(void);
 	void			(*init_late)(void);
-#ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER
 	void			(*handle_irq)(struct pt_regs *);
-#endif
 	void			(*restart)(enum reboot_mode, const char *);
 };
 
diff --git a/arch/arm/include/asm/mach/dma.h b/arch/arm/include/asm/mach/dma.h
index 1506422af383..5ec11d7f0d04 100644
--- a/arch/arm/include/asm/mach/dma.h
+++ b/arch/arm/include/asm/mach/dma.h
@@ -44,8 +44,3 @@ struct dma_struct {
  * isa_dma_add - add an ISA-style DMA channel
  */
 extern int isa_dma_add(unsigned int, dma_t *dma);
-
-/*
- * Add the ISA DMA controller.  Always takes channels 0-7.
- */
-extern void isa_init_dma(void);
diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h
index 92282558caf7..2b8970d8e5a2 100644
--- a/arch/arm/include/asm/mach/map.h
+++ b/arch/arm/include/asm/mach/map.h
@@ -27,6 +27,7 @@ enum {
 	MT_HIGH_VECTORS,
 	MT_MEMORY_RWX,
 	MT_MEMORY_RW,
+	MT_MEMORY_RO,
 	MT_ROM,
 	MT_MEMORY_RWX_NONCACHED,
 	MT_MEMORY_RW_DTCM,
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index f673e13e0f94..d8eef4bd8c71 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -370,19 +370,6 @@ static inline unsigned long __virt_to_idmap(unsigned long x)
 #define virt_to_idmap(x)	__virt_to_idmap((unsigned long)(x))
 
 /*
- * Virtual <-> DMA view memory address translations
- * Again, these are *only* valid on the kernel direct mapped RAM
- * memory.  Use of these is *deprecated* (and that doesn't mean
- * use the __ prefixed forms instead.)  See dma-mapping.h.
- */
-#ifndef __virt_to_bus
-#define __virt_to_bus	__virt_to_phys
-#define __bus_to_virt	__phys_to_virt
-#define __pfn_to_bus(x)	__pfn_to_phys(x)
-#define __bus_to_pfn(x)	__phys_to_pfn(x)
-#endif
-
-/*
  * Conversion between a struct page and a physical address.
  *
  *  page_to_pfn(page)	convert a struct page * to a PFN number
diff --git a/arch/arm/include/asm/mmu.h b/arch/arm/include/asm/mmu.h
index 1592a4264488..e049723840d3 100644
--- a/arch/arm/include/asm/mmu.h
+++ b/arch/arm/include/asm/mmu.h
@@ -10,7 +10,7 @@ typedef struct {
 #else
 	int		switch_pending;
 #endif
-	unsigned int	vmalloc_seq;
+	atomic_t	vmalloc_seq;
 	unsigned long	sigpage;
 #ifdef CONFIG_VDSO
 	unsigned long	vdso;
diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h
index 84e58956fcab..db2cb06aa8cf 100644
--- a/arch/arm/include/asm/mmu_context.h
+++ b/arch/arm/include/asm/mmu_context.h
@@ -23,6 +23,16 @@
 
 void __check_vmalloc_seq(struct mm_struct *mm);
 
+#ifdef CONFIG_MMU
+static inline void check_vmalloc_seq(struct mm_struct *mm)
+{
+	if (!IS_ENABLED(CONFIG_ARM_LPAE) &&
+	    unlikely(atomic_read(&mm->context.vmalloc_seq) !=
+		     atomic_read(&init_mm.context.vmalloc_seq)))
+		__check_vmalloc_seq(mm);
+}
+#endif
+
 #ifdef CONFIG_CPU_HAS_ASID
 
 void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk);
@@ -52,8 +62,7 @@ static inline void a15_erratum_get_cpumask(int this_cpu, struct mm_struct *mm,
 static inline void check_and_switch_context(struct mm_struct *mm,
 					    struct task_struct *tsk)
 {
-	if (unlikely(mm->context.vmalloc_seq != init_mm.context.vmalloc_seq))
-		__check_vmalloc_seq(mm);
+	check_vmalloc_seq(mm);
 
 	if (irqs_disabled())
 		/*
@@ -129,6 +138,15 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next,
 #endif
 }
 
+#ifdef CONFIG_VMAP_STACK
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+	if (mm != &init_mm)
+		check_vmalloc_seq(mm);
+}
+#define enter_lazy_tlb enter_lazy_tlb
+#endif
+
 #include <asm-generic/mmu_context.h>
 
 #endif
diff --git a/arch/arm/include/asm/module.h b/arch/arm/include/asm/module.h
index cfffae67c04e..5546c9751478 100644
--- a/arch/arm/include/asm/module.h
+++ b/arch/arm/include/asm/module.h
@@ -3,20 +3,10 @@
 #define _ASM_ARM_MODULE_H
 
 #include <asm-generic/module.h>
-
-struct unwind_table;
+#include <asm/unwind.h>
 
 #ifdef CONFIG_ARM_UNWIND
-enum {
-	ARM_SEC_INIT,
-	ARM_SEC_DEVINIT,
-	ARM_SEC_CORE,
-	ARM_SEC_EXIT,
-	ARM_SEC_DEVEXIT,
-	ARM_SEC_HOT,
-	ARM_SEC_UNLIKELY,
-	ARM_SEC_MAX,
-};
+#define ELF_SECTION_UNWIND 0x70000001
 #endif
 
 #define PLT_ENT_STRIDE		L1_CACHE_BYTES
@@ -36,7 +26,8 @@ struct mod_plt_sec {
 
 struct mod_arch_specific {
 #ifdef CONFIG_ARM_UNWIND
-	struct unwind_table *unwind[ARM_SEC_MAX];
+	struct list_head unwind_list;
+	struct unwind_table *init_table;
 #endif
 #ifdef CONFIG_ARM_MODULE_PLTS
 	struct mod_plt_sec	core;
diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
index 11b058a72a5b..5fcc8a600e36 100644
--- a/arch/arm/include/asm/page.h
+++ b/arch/arm/include/asm/page.h
@@ -147,6 +147,9 @@ extern void copy_page(void *to, const void *from);
 #include <asm/pgtable-3level-types.h>
 #else
 #include <asm/pgtable-2level-types.h>
+#ifdef CONFIG_VMAP_STACK
+#define ARCH_PAGE_TABLE_SYNC_MASK	PGTBL_PMD_MODIFIED
+#endif
 #endif
 
 #endif /* CONFIG_MMU */
diff --git a/arch/arm/include/asm/paravirt_api_clock.h b/arch/arm/include/asm/paravirt_api_clock.h
new file mode 100644
index 000000000000..65ac7cee0dad
--- /dev/null
+++ b/arch/arm/include/asm/paravirt_api_clock.h
@@ -0,0 +1 @@
+#include <asm/paravirt.h>
diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h
index 68e6f25784a4..5916b88d4c94 100644
--- a/arch/arm/include/asm/pci.h
+++ b/arch/arm/include/asm/pci.h
@@ -22,11 +22,6 @@ static inline int pci_proc_domain(struct pci_bus *bus)
 #define HAVE_PCI_MMAP
 #define ARCH_GENERIC_PCI_MMAP_RESOURCE
 
-static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
-{
-	return channel ? 15 : 14;
-}
-
 extern void pcibios_report_status(unsigned int status_mask, int warn);
 
 #endif /* __KERNEL__ */
diff --git a/arch/arm/include/asm/percpu.h b/arch/arm/include/asm/percpu.h
index e2fcb3cfd3de..7545c87c251f 100644
--- a/arch/arm/include/asm/percpu.h
+++ b/arch/arm/include/asm/percpu.h
@@ -5,20 +5,27 @@
 #ifndef _ASM_ARM_PERCPU_H_
 #define _ASM_ARM_PERCPU_H_
 
+#include <asm/insn.h>
+
 register unsigned long current_stack_pointer asm ("sp");
 
 /*
  * Same as asm-generic/percpu.h, except that we store the per cpu offset
  * in the TPIDRPRW. TPIDRPRW only exists on V6K and V7
  */
-#if defined(CONFIG_SMP) && !defined(CONFIG_CPU_V6)
+#ifdef CONFIG_SMP
 static inline void set_my_cpu_offset(unsigned long off)
 {
+	extern unsigned int smp_on_up;
+
+	if (IS_ENABLED(CONFIG_CPU_V6) && !smp_on_up)
+		return;
+
 	/* Set TPIDRPRW */
 	asm volatile("mcr p15, 0, %0, c13, c0, 4" : : "r" (off) : "memory");
 }
 
-static inline unsigned long __my_cpu_offset(void)
+static __always_inline unsigned long __my_cpu_offset(void)
 {
 	unsigned long off;
 
@@ -27,8 +34,28 @@ static inline unsigned long __my_cpu_offset(void)
 	 * We want to allow caching the value, so avoid using volatile and
 	 * instead use a fake stack read to hazard against barrier().
 	 */
-	asm("mrc p15, 0, %0, c13, c0, 4" : "=r" (off)
-		: "Q" (*(const unsigned long *)current_stack_pointer));
+	asm("0:	mrc p15, 0, %0, c13, c0, 4			\n\t"
+#ifdef CONFIG_CPU_V6
+	    "1:							\n\t"
+	    "	.subsection 1					\n\t"
+#if defined(CONFIG_ARM_HAS_GROUP_RELOCS) && \
+    !(defined(MODULE) && defined(CONFIG_ARM_MODULE_PLTS))
+	    "2: " LOAD_SYM_ARMV6(%0, __per_cpu_offset) "	\n\t"
+	    "	b	1b					\n\t"
+#else
+	    "2: ldr	%0, 3f					\n\t"
+	    "	ldr	%0, [%0]				\n\t"
+	    "	b	1b					\n\t"
+	    "3:	.long	__per_cpu_offset			\n\t"
+#endif
+	    "	.previous					\n\t"
+	    "	.pushsection \".alt.smp.init\", \"a\"		\n\t"
+	    "	.long	0b - .					\n\t"
+	    "	b	. + (2b - 0b)				\n\t"
+	    "	.popsection					\n\t"
+#endif
+	     : "=r" (off)
+	     : "Q" (*(const unsigned long *)current_stack_pointer));
 
 	return off;
 }
diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h
index fe87397c3d8c..bdbc1e590891 100644
--- a/arch/arm/include/asm/perf_event.h
+++ b/arch/arm/include/asm/perf_event.h
@@ -17,7 +17,7 @@ extern unsigned long perf_misc_flags(struct pt_regs *regs);
 
 #define perf_arch_fetch_caller_regs(regs, __ip) { \
 	(regs)->ARM_pc = (__ip); \
-	(regs)->ARM_fp = (unsigned long) __builtin_frame_address(0); \
+	frame_pointer((regs)) = (unsigned long) __builtin_frame_address(0); \
 	(regs)->ARM_sp = current_stack_pointer; \
 	(regs)->ARM_cpsr = SVC_MODE; \
 }
diff --git a/arch/arm/include/asm/pgtable-2level.h b/arch/arm/include/asm/pgtable-2level.h
index 70fe69bdcce2..92abd4cd8ca2 100644
--- a/arch/arm/include/asm/pgtable-2level.h
+++ b/arch/arm/include/asm/pgtable-2level.h
@@ -208,6 +208,8 @@ static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr)
 }
 #define pmd_offset pmd_offset
 
+#define pmd_pfn(pmd)		(__phys_to_pfn(pmd_val(pmd) & PHYS_MASK))
+
 #define pmd_large(pmd)		(pmd_val(pmd) & 2)
 #define pmd_leaf(pmd)		(pmd_val(pmd) & 2)
 #define pmd_bad(pmd)		(pmd_val(pmd) & 2)
diff --git a/arch/arm/include/asm/pgtable-nommu.h b/arch/arm/include/asm/pgtable-nommu.h
index d16aba48fa0a..090011394477 100644
--- a/arch/arm/include/asm/pgtable-nommu.h
+++ b/arch/arm/include/asm/pgtable-nommu.h
@@ -45,12 +45,6 @@
 typedef pte_t *pte_addr_t;
 
 /*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-#define ZERO_PAGE(vaddr)	(virt_to_page(0))
-
-/*
  * Mark the prot value as uncacheable and unbufferable.
  */
 #define pgprot_noncached(prot)	(prot)
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index cd1f84bb40ae..ef48a55e9af8 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -10,6 +10,15 @@
 #include <linux/const.h>
 #include <asm/proc-fns.h>
 
+#ifndef __ASSEMBLY__
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern struct page *empty_zero_page;
+#define ZERO_PAGE(vaddr)	(empty_zero_page)
+#endif
+
 #ifndef CONFIG_MMU
 
 #include <asm-generic/pgtable-nopud.h>
@@ -137,32 +146,8 @@ extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
  *  2) If we could do execute protection, then read is implied
  *  3) write implies read permissions
  */
-#define __P000  __PAGE_NONE
-#define __P001  __PAGE_READONLY
-#define __P010  __PAGE_COPY
-#define __P011  __PAGE_COPY
-#define __P100  __PAGE_READONLY_EXEC
-#define __P101  __PAGE_READONLY_EXEC
-#define __P110  __PAGE_COPY_EXEC
-#define __P111  __PAGE_COPY_EXEC
-
-#define __S000  __PAGE_NONE
-#define __S001  __PAGE_READONLY
-#define __S010  __PAGE_SHARED
-#define __S011  __PAGE_SHARED
-#define __S100  __PAGE_READONLY_EXEC
-#define __S101  __PAGE_READONLY_EXEC
-#define __S110  __PAGE_SHARED_EXEC
-#define __S111  __PAGE_SHARED_EXEC
 
 #ifndef __ASSEMBLY__
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-extern struct page *empty_zero_page;
-#define ZERO_PAGE(vaddr)	(empty_zero_page)
-
 
 extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 
diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
index bdc35c0e8dfb..326864f79d18 100644
--- a/arch/arm/include/asm/processor.h
+++ b/arch/arm/include/asm/processor.h
@@ -81,9 +81,6 @@ static inline void arch_thread_struct_whitelist(unsigned long *offset,
 /* Forward declaration, a strange C thing */
 struct task_struct;
 
-/* Free all resources held by a thread. */
-extern void release_thread(struct task_struct *);
-
 unsigned long __get_wchan(struct task_struct *p);
 
 #define task_pt_regs(p) \
diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h
index 93051e2f402c..1408a6a15d0e 100644
--- a/arch/arm/include/asm/ptrace.h
+++ b/arch/arm/include/asm/ptrace.h
@@ -163,5 +163,31 @@ static inline unsigned long user_stack_pointer(struct pt_regs *regs)
 		((current_stack_pointer | (THREAD_SIZE - 1)) - 7) - 1;	\
 })
 
+
+/*
+ * Update ITSTATE after normal execution of an IT block instruction.
+ *
+ * The 8 IT state bits are split into two parts in CPSR:
+ *	ITSTATE<1:0> are in CPSR<26:25>
+ *	ITSTATE<7:2> are in CPSR<15:10>
+ */
+static inline unsigned long it_advance(unsigned long cpsr)
+{
+	if ((cpsr & 0x06000400) == 0) {
+		/* ITSTATE<2:0> == 0 means end of IT block, so clear IT state */
+		cpsr &= ~PSR_IT_MASK;
+	} else {
+		/* We need to shift left ITSTATE<4:0> */
+		const unsigned long mask = 0x06001c00;  /* Mask ITSTATE<4:0> */
+		unsigned long it = cpsr & mask;
+		it <<= 1;
+		it |= it >> (27 - 10);  /* Carry ITSTATE<2> to correct place */
+		it &= mask;
+		cpsr &= ~mask;
+		cpsr |= it;
+	}
+	return cpsr;
+}
+
 #endif /* __ASSEMBLY__ */
 #endif
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index f16cbbd5cda4..7c1c90d9f582 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -25,11 +25,6 @@ struct seq_file;
 extern void show_ipi_list(struct seq_file *, int);
 
 /*
- * Called from assembly code, this handles an IPI.
- */
-asmlinkage void do_IPI(int ipinr, struct pt_regs *regs);
-
-/*
  * Called from C code, this handles an IPI.
  */
 void handle_IPI(int ipinr, struct pt_regs *regs);
diff --git a/arch/arm/include/asm/spectre.h b/arch/arm/include/asm/spectre.h
new file mode 100644
index 000000000000..85f9e538fb32
--- /dev/null
+++ b/arch/arm/include/asm/spectre.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __ASM_SPECTRE_H
+#define __ASM_SPECTRE_H
+
+enum {
+	SPECTRE_UNAFFECTED,
+	SPECTRE_MITIGATED,
+	SPECTRE_VULNERABLE,
+};
+
+enum {
+	__SPECTRE_V2_METHOD_BPIALL,
+	__SPECTRE_V2_METHOD_ICIALLU,
+	__SPECTRE_V2_METHOD_SMC,
+	__SPECTRE_V2_METHOD_HVC,
+	__SPECTRE_V2_METHOD_LOOP8,
+};
+
+enum {
+	SPECTRE_V2_METHOD_BPIALL = BIT(__SPECTRE_V2_METHOD_BPIALL),
+	SPECTRE_V2_METHOD_ICIALLU = BIT(__SPECTRE_V2_METHOD_ICIALLU),
+	SPECTRE_V2_METHOD_SMC = BIT(__SPECTRE_V2_METHOD_SMC),
+	SPECTRE_V2_METHOD_HVC = BIT(__SPECTRE_V2_METHOD_HVC),
+	SPECTRE_V2_METHOD_LOOP8 = BIT(__SPECTRE_V2_METHOD_LOOP8),
+};
+
+#ifdef CONFIG_GENERIC_CPU_VULNERABILITIES
+void spectre_v2_update_state(unsigned int state, unsigned int methods);
+#else
+static inline void spectre_v2_update_state(unsigned int state,
+					   unsigned int methods)
+{}
+#endif
+
+int spectre_bhb_update_vectors(unsigned int method);
+
+#endif
diff --git a/arch/arm/include/asm/stacktrace.h b/arch/arm/include/asm/stacktrace.h
index 8f54f9ad8a9b..36b2ff44fcbb 100644
--- a/arch/arm/include/asm/stacktrace.h
+++ b/arch/arm/include/asm/stacktrace.h
@@ -14,10 +14,16 @@ struct stackframe {
 	unsigned long sp;
 	unsigned long lr;
 	unsigned long pc;
+
+	/* address of the LR value on the stack */
+	unsigned long *lr_addr;
 #ifdef CONFIG_KRETPROBES
 	struct llist_node *kr_cur;
 	struct task_struct *tsk;
 #endif
+#ifdef CONFIG_UNWINDER_FRAME_POINTER
+	bool ex_frame;
+#endif
 };
 
 static __always_inline
@@ -31,10 +37,17 @@ void arm_get_current_stackframe(struct pt_regs *regs, struct stackframe *frame)
 		frame->kr_cur = NULL;
 		frame->tsk = current;
 #endif
+#ifdef CONFIG_UNWINDER_FRAME_POINTER
+		frame->ex_frame = in_entry_text(frame->pc);
+#endif
 }
 
 extern int unwind_frame(struct stackframe *frame);
 extern void walk_stackframe(struct stackframe *frame,
 			    int (*fn)(struct stackframe *, void *), void *data);
+extern void dump_mem(const char *lvl, const char *str, unsigned long bottom,
+		     unsigned long top);
+extern void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk,
+			   const char *loglvl);
 
 #endif	/* __ASM_STACKTRACE_H */
diff --git a/arch/arm/include/asm/switch_to.h b/arch/arm/include/asm/switch_to.h
index 61e4a3c4ca6e..9372348516ce 100644
--- a/arch/arm/include/asm/switch_to.h
+++ b/arch/arm/include/asm/switch_to.h
@@ -3,6 +3,7 @@
 #define __ASM_ARM_SWITCH_TO_H
 
 #include <linux/thread_info.h>
+#include <asm/smp_plat.h>
 
 /*
  * For v7 SMP cores running a preemptible kernel we may be pre-empted
@@ -26,7 +27,7 @@ extern struct task_struct *__switch_to(struct task_struct *, struct thread_info
 #define switch_to(prev,next,last)					\
 do {									\
 	__complete_pending_tlbi();					\
-	if (IS_ENABLED(CONFIG_CURRENT_POINTER_IN_TPIDRURO))		\
+	if (IS_ENABLED(CONFIG_CURRENT_POINTER_IN_TPIDRURO) || is_smp())	\
 		__this_cpu_write(__entry_task, next);			\
 	last = __switch_to(prev,task_thread_info(prev), task_thread_info(next));	\
 } while (0)
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index 164e15f26485..aecc403b2880 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -25,6 +25,14 @@
 #define THREAD_SIZE		(PAGE_SIZE << THREAD_SIZE_ORDER)
 #define THREAD_START_SP		(THREAD_SIZE - 8)
 
+#ifdef CONFIG_VMAP_STACK
+#define THREAD_ALIGN		(2 * THREAD_SIZE)
+#else
+#define THREAD_ALIGN		THREAD_SIZE
+#endif
+
+#define OVERFLOW_STACK_SIZE	SZ_4K
+
 #ifndef __ASSEMBLY__
 
 struct task_struct;
@@ -54,9 +62,6 @@ struct cpu_context_save {
 struct thread_info {
 	unsigned long		flags;		/* low level flags */
 	int			preempt_count;	/* 0 => preemptable, <0 => bug */
-#ifndef CONFIG_THREAD_INFO_IN_TASK
-	struct task_struct	*task;		/* main task structure */
-#endif
 	__u32			cpu;		/* cpu */
 	__u32			cpu_domain;	/* cpu domain */
 	struct cpu_context_save	cpu_context;	/* cpu context */
@@ -72,39 +77,15 @@ struct thread_info {
 
 #define INIT_THREAD_INFO(tsk)						\
 {									\
-	INIT_THREAD_INFO_TASK(tsk)					\
 	.flags		= 0,						\
 	.preempt_count	= INIT_PREEMPT_COUNT,				\
 }
 
-#ifdef CONFIG_THREAD_INFO_IN_TASK
-#define INIT_THREAD_INFO_TASK(tsk)
-
 static inline struct task_struct *thread_task(struct thread_info* ti)
 {
 	return (struct task_struct *)ti;
 }
 
-#else
-#define INIT_THREAD_INFO_TASK(tsk)	.task = &(tsk),
-
-static inline struct task_struct *thread_task(struct thread_info* ti)
-{
-	return ti->task;
-}
-
-/*
- * how to get the thread information struct from C
- */
-static inline struct thread_info *current_thread_info(void) __attribute_const__;
-
-static inline struct thread_info *current_thread_info(void)
-{
-	return (struct thread_info *)
-		(current_stack_pointer & ~(THREAD_SIZE - 1));
-}
-#endif
-
 #define thread_saved_pc(tsk)	\
 	((unsigned long)(task_thread_info(tsk)->cpu_context.pc))
 #define thread_saved_sp(tsk)	\
diff --git a/arch/arm/include/asm/timex.h b/arch/arm/include/asm/timex.h
index 7c3b3671d6c2..6d1337c169cd 100644
--- a/arch/arm/include/asm/timex.h
+++ b/arch/arm/include/asm/timex.h
@@ -11,5 +11,6 @@
 
 typedef unsigned long cycles_t;
 #define get_cycles()	({ cycles_t c; read_current_timer(&c) ? 0 : c; })
+#define random_get_entropy() (((unsigned long)get_cycles()) ?: random_get_entropy_fallback())
 
 #endif
diff --git a/arch/arm/include/asm/tls.h b/arch/arm/include/asm/tls.h
index c3296499176c..3dcd0f71a0da 100644
--- a/arch/arm/include/asm/tls.h
+++ b/arch/arm/include/asm/tls.h
@@ -18,21 +18,32 @@
 	.endm
 
 	.macro switch_tls_v6, base, tp, tpuser, tmp1, tmp2
-	ldr	\tmp1, =elf_hwcap
-	ldr	\tmp1, [\tmp1, #0]
+#ifdef CONFIG_SMP
+ALT_SMP(nop)
+ALT_UP_B(.L0_\@)
+	.subsection 1
+#endif
+.L0_\@:
+	ldr_va	\tmp1, elf_hwcap
 	mov	\tmp2, #0xffff0fff
 	tst	\tmp1, #HWCAP_TLS		@ hardware TLS available?
 	streq	\tp, [\tmp2, #-15]		@ set TLS value at 0xffff0ff0
-	mrcne	p15, 0, \tmp2, c13, c0, 2	@ get the user r/w register
-	mcrne	p15, 0, \tp, c13, c0, 3		@ yes, set TLS register
-	mcrne	p15, 0, \tpuser, c13, c0, 2	@ set user r/w register
-	strne	\tmp2, [\base, #TI_TP_VALUE + 4] @ save it
+	beq	.L2_\@
+	mcr	p15, 0, \tp, c13, c0, 3		@ yes, set TLS register
+#ifdef CONFIG_SMP
+	b	.L1_\@
+	.previous
+#endif
+.L1_\@: switch_tls_v6k \base, \tp, \tpuser, \tmp1, \tmp2
+.L2_\@:
 	.endm
 
 	.macro switch_tls_software, base, tp, tpuser, tmp1, tmp2
 	mov	\tmp1, #0xffff0fff
 	str	\tp, [\tmp1, #-15]		@ set TLS value at 0xffff0ff0
 	.endm
+#else
+#include <asm/smp_plat.h>
 #endif
 
 #ifdef CONFIG_TLS_REG_EMUL
@@ -43,7 +54,7 @@
 #elif defined(CONFIG_CPU_V6)
 #define tls_emu		0
 #define has_tls_reg		(elf_hwcap & HWCAP_TLS)
-#define defer_tls_reg_update	0
+#define defer_tls_reg_update	is_smp()
 #define switch_tls	switch_tls_v6
 #elif defined(CONFIG_CPU_32v6K)
 #define tls_emu		0
@@ -81,11 +92,11 @@ static inline void set_tls(unsigned long val)
 	 */
 	barrier();
 
-	if (!tls_emu && !defer_tls_reg_update) {
-		if (has_tls_reg) {
+	if (!tls_emu) {
+		if (has_tls_reg && !defer_tls_reg_update) {
 			asm("mcr p15, 0, %0, c13, c0, 3"
 			    : : "r" (val));
-		} else {
+		} else if (!has_tls_reg) {
 #ifdef CONFIG_KUSER_HELPERS
 			/*
 			 * User space must never try to access this
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index 32dbfd81f42a..2fcbec9c306c 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -56,21 +56,6 @@ extern int __put_user_bad(void);
 #ifdef CONFIG_MMU
 
 /*
- * We use 33-bit arithmetic here.  Success returns zero, failure returns
- * addr_limit.  We take advantage that addr_limit will be zero for KERNEL_DS,
- * so this will always return success in that case.
- */
-#define __range_ok(addr, size) ({ \
-	unsigned long flag, roksum; \
-	__chk_user_ptr(addr);	\
-	__asm__(".syntax unified\n" \
-		"adds %1, %2, %3; sbcscc %1, %1, %0; movcc %0, #0" \
-		: "=&r" (flag), "=&r" (roksum) \
-		: "r" (addr), "Ir" (size), "0" (TASK_SIZE) \
-		: "cc"); \
-	flag; })
-
-/*
  * This is a type: either unsigned long, if the argument fits into
  * that type, or otherwise unsigned long long.
  */
@@ -241,15 +226,12 @@ extern int __put_user_8(void *, unsigned long long);
 
 #else /* CONFIG_MMU */
 
-#define __addr_ok(addr)		((void)(addr), 1)
-#define __range_ok(addr, size)	((void)(addr), 0)
-
 #define get_user(x, p)	__get_user(x, p)
 #define __put_user_check __put_user_nocheck
 
 #endif /* CONFIG_MMU */
 
-#define access_ok(addr, size)	(__range_ok(addr, size) == 0)
+#include <asm-generic/access_ok.h>
 
 #ifdef CONFIG_CPU_SPECTRE
 /*
@@ -476,8 +458,6 @@ do {									\
 	: "r" (x), "i" (-EFAULT)				\
 	: "cc")
 
-#define HAVE_GET_KERNEL_NOFAULT
-
 #define __get_kernel_nofault(dst, src, type, err_label)			\
 do {									\
 	const type *__pk_ptr = (src);					\
diff --git a/arch/arm/include/asm/unwind.h b/arch/arm/include/asm/unwind.h
index 0f8a3439902d..b51f85417f58 100644
--- a/arch/arm/include/asm/unwind.h
+++ b/arch/arm/include/asm/unwind.h
@@ -24,6 +24,7 @@ struct unwind_idx {
 
 struct unwind_table {
 	struct list_head list;
+	struct list_head mod_list;
 	const struct unwind_idx *start;
 	const struct unwind_idx *origin;
 	const struct unwind_idx *stop;
diff --git a/arch/arm/include/asm/user.h b/arch/arm/include/asm/user.h
index c799a3c49342..167d44b550f4 100644
--- a/arch/arm/include/asm/user.h
+++ b/arch/arm/include/asm/user.h
@@ -77,10 +77,6 @@ struct user{
   struct user_fp_struct * u_fp0;/* Used by gdb to help find the values for */
   				/* the FP registers. */
 };
-#define NBPG PAGE_SIZE
-#define UPAGES 1
-#define HOST_TEXT_START_ADDR (u.start_code)
-#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
 
 /*
  * User specific VFP registers. If only VFPv2 is present, registers 16 to 31
diff --git a/arch/arm/include/asm/v7m.h b/arch/arm/include/asm/v7m.h
index 2cb00d15831b..4512f7e1918f 100644
--- a/arch/arm/include/asm/v7m.h
+++ b/arch/arm/include/asm/v7m.h
@@ -13,6 +13,7 @@
 #define V7M_SCB_ICSR_PENDSVSET			(1 << 28)
 #define V7M_SCB_ICSR_PENDSVCLR			(1 << 27)
 #define V7M_SCB_ICSR_RETTOBASE			(1 << 11)
+#define V7M_SCB_ICSR_VECTACTIVE			0x000001ff
 
 #define V7M_SCB_VTOR			0x08
 
@@ -38,7 +39,7 @@
 #define V7M_SCB_SHCSR_MEMFAULTENA		(1 << 16)
 
 #define V7M_xPSR_FRAMEPTRALIGN			0x00000200
-#define V7M_xPSR_EXCEPTIONNO			0x000001ff
+#define V7M_xPSR_EXCEPTIONNO			V7M_SCB_ICSR_VECTACTIVE
 
 /*
  * When branching to an address that has bits [31:28] == 0xf an exception return
diff --git a/arch/arm/include/asm/vmlinux.lds.h b/arch/arm/include/asm/vmlinux.lds.h
index 4a91428c324d..fad45c884e98 100644
--- a/arch/arm/include/asm/vmlinux.lds.h
+++ b/arch/arm/include/asm/vmlinux.lds.h
@@ -26,6 +26,19 @@
 #define ARM_MMU_DISCARD(x)	x
 #endif
 
+/*
+ * ld.lld does not support NOCROSSREFS:
+ * https://github.com/ClangBuiltLinux/linux/issues/1609
+ */
+#ifdef CONFIG_LD_IS_LLD
+#define NOCROSSREFS
+#endif
+
+/* Set start/end symbol names to the LMA for the section */
+#define ARM_LMA(sym, section)						\
+	sym##_start = LOADADDR(section);				\
+	sym##_end = LOADADDR(section) + SIZEOF(section)
+
 #define PROC_INFO							\
 		. = ALIGN(4);						\
 		__proc_info_begin = .;					\
@@ -110,19 +123,31 @@
  * only thing that matters is their relative offsets
  */
 #define ARM_VECTORS							\
-	__vectors_start = .;						\
-	.vectors 0xffff0000 : AT(__vectors_start) {			\
-		*(.vectors)						\
+	__vectors_lma = .;						\
+	OVERLAY 0xffff0000 : NOCROSSREFS AT(__vectors_lma) {		\
+		.vectors {						\
+			*(.vectors)					\
+		}							\
+		.vectors.bhb.loop8 {					\
+			*(.vectors.bhb.loop8)				\
+		}							\
+		.vectors.bhb.bpiall {					\
+			*(.vectors.bhb.bpiall)				\
+		}							\
 	}								\
-	. = __vectors_start + SIZEOF(.vectors);				\
-	__vectors_end = .;						\
+	ARM_LMA(__vectors, .vectors);					\
+	ARM_LMA(__vectors_bhb_loop8, .vectors.bhb.loop8);		\
+	ARM_LMA(__vectors_bhb_bpiall, .vectors.bhb.bpiall);		\
+	. = __vectors_lma + SIZEOF(.vectors) +				\
+		SIZEOF(.vectors.bhb.loop8) +				\
+		SIZEOF(.vectors.bhb.bpiall);				\
 									\
-	__stubs_start = .;						\
-	.stubs ADDR(.vectors) + 0x1000 : AT(__stubs_start) {		\
+	__stubs_lma = .;						\
+	.stubs ADDR(.vectors) + 0x1000 : AT(__stubs_lma) {		\
 		*(.stubs)						\
 	}								\
-	. = __stubs_start + SIZEOF(.stubs);				\
-	__stubs_end = .;						\
+	ARM_LMA(__stubs, .stubs);					\
+	. = __stubs_lma + SIZEOF(.stubs);				\
 									\
 	PROVIDE(vector_fiq_offset = vector_fiq - ADDR(.vectors));
 
diff --git a/arch/arm/include/asm/xen/page-coherent.h b/arch/arm/include/asm/xen/xen-ops.h
index 27e984977402..7ebb7eb0bd93 100644
--- a/arch/arm/include/asm/xen/page-coherent.h
+++ b/arch/arm/include/asm/xen/xen-ops.h
@@ -1,2 +1,2 @@
 /* SPDX-License-Identifier: GPL-2.0 */
-#include <xen/arm/page-coherent.h>
+#include <xen/arm/xen-ops.h>
diff --git a/arch/arm/include/asm/xor.h b/arch/arm/include/asm/xor.h
index aefddec79286..669cad5194d3 100644
--- a/arch/arm/include/asm/xor.h
+++ b/arch/arm/include/asm/xor.h
@@ -44,7 +44,8 @@
 		: "0" (dst), "r" (a1), "r" (a2), "r" (a3), "r" (a4))
 
 static void
-xor_arm4regs_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+xor_arm4regs_2(unsigned long bytes, unsigned long * __restrict p1,
+	       const unsigned long * __restrict p2)
 {
 	unsigned int lines = bytes / sizeof(unsigned long) / 4;
 	register unsigned int a1 __asm__("r4");
@@ -64,8 +65,9 @@ xor_arm4regs_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
 }
 
 static void
-xor_arm4regs_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-		unsigned long *p3)
+xor_arm4regs_3(unsigned long bytes, unsigned long * __restrict p1,
+	       const unsigned long * __restrict p2,
+	       const unsigned long * __restrict p3)
 {
 	unsigned int lines = bytes / sizeof(unsigned long) / 4;
 	register unsigned int a1 __asm__("r4");
@@ -86,8 +88,10 @@ xor_arm4regs_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
 }
 
 static void
-xor_arm4regs_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-		unsigned long *p3, unsigned long *p4)
+xor_arm4regs_4(unsigned long bytes, unsigned long * __restrict p1,
+	       const unsigned long * __restrict p2,
+	       const unsigned long * __restrict p3,
+	       const unsigned long * __restrict p4)
 {
 	unsigned int lines = bytes / sizeof(unsigned long) / 2;
 	register unsigned int a1 __asm__("r8");
@@ -105,8 +109,11 @@ xor_arm4regs_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
 }
 
 static void
-xor_arm4regs_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-		unsigned long *p3, unsigned long *p4, unsigned long *p5)
+xor_arm4regs_5(unsigned long bytes, unsigned long * __restrict p1,
+	       const unsigned long * __restrict p2,
+	       const unsigned long * __restrict p3,
+	       const unsigned long * __restrict p4,
+	       const unsigned long * __restrict p5)
 {
 	unsigned int lines = bytes / sizeof(unsigned long) / 2;
 	register unsigned int a1 __asm__("r8");
@@ -146,7 +153,8 @@ static struct xor_block_template xor_block_arm4regs = {
 extern struct xor_block_template const xor_block_neon_inner;
 
 static void
-xor_neon_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+xor_neon_2(unsigned long bytes, unsigned long * __restrict p1,
+	   const unsigned long * __restrict p2)
 {
 	if (in_interrupt()) {
 		xor_arm4regs_2(bytes, p1, p2);
@@ -158,8 +166,9 @@ xor_neon_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
 }
 
 static void
-xor_neon_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-		unsigned long *p3)
+xor_neon_3(unsigned long bytes, unsigned long * __restrict p1,
+	   const unsigned long * __restrict p2,
+	   const unsigned long * __restrict p3)
 {
 	if (in_interrupt()) {
 		xor_arm4regs_3(bytes, p1, p2, p3);
@@ -171,8 +180,10 @@ xor_neon_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
 }
 
 static void
-xor_neon_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-		unsigned long *p3, unsigned long *p4)
+xor_neon_4(unsigned long bytes, unsigned long * __restrict p1,
+	   const unsigned long * __restrict p2,
+	   const unsigned long * __restrict p3,
+	   const unsigned long * __restrict p4)
 {
 	if (in_interrupt()) {
 		xor_arm4regs_4(bytes, p1, p2, p3, p4);
@@ -184,8 +195,11 @@ xor_neon_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
 }
 
 static void
-xor_neon_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-		unsigned long *p3, unsigned long *p4, unsigned long *p5)
+xor_neon_5(unsigned long bytes, unsigned long * __restrict p1,
+	   const unsigned long * __restrict p2,
+	   const unsigned long * __restrict p3,
+	   const unsigned long * __restrict p4,
+	   const unsigned long * __restrict p5)
 {
 	if (in_interrupt()) {
 		xor_arm4regs_5(bytes, p1, p2, p3, p4, p5);
diff --git a/arch/arm/include/debug/brcmstb.S b/arch/arm/include/debug/brcmstb.S
index f684e3a815f6..f6175e6e28cd 100644
--- a/arch/arm/include/debug/brcmstb.S
+++ b/arch/arm/include/debug/brcmstb.S
@@ -1,15 +1,5 @@
-/*
- * Copyright (C) 2016 Broadcom
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright (C) 2016 Broadcom */
 #include <linux/serial_reg.h>
 #include <asm/cputype.h>
 
diff --git a/arch/arm/include/uapi/asm/signal.h b/arch/arm/include/uapi/asm/signal.h
index c9a3ea1d8d41..9e2178420db2 100644
--- a/arch/arm/include/uapi/asm/signal.h
+++ b/arch/arm/include/uapi/asm/signal.h
@@ -93,7 +93,7 @@ struct sigaction {
 typedef struct sigaltstack {
 	void __user *ss_sp;
 	int ss_flags;
-	size_t ss_size;
+	__kernel_size_t ss_size;
 } stack_t;
 
 
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index ae295a3bcfef..48737ec800eb 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -10,6 +10,7 @@ ifdef CONFIG_FUNCTION_TRACER
 CFLAGS_REMOVE_ftrace.o = -pg
 CFLAGS_REMOVE_insn.o = -pg
 CFLAGS_REMOVE_patch.o = -pg
+CFLAGS_REMOVE_unwind.o = -pg
 endif
 
 CFLAGS_REMOVE_return_address.o = -pg
@@ -44,7 +45,6 @@ obj-$(CONFIG_ISA_DMA_API)	+= dma.o
 obj-$(CONFIG_FIQ)		+= fiq.o fiqasm.o
 obj-$(CONFIG_MODULES)		+= armksyms.o module.o
 obj-$(CONFIG_ARM_MODULE_PLTS)	+= module-plts.o
-obj-$(CONFIG_ISA_DMA)		+= dma-isa.o
 obj-$(CONFIG_PCI)		+= bios32.o isa.o
 obj-$(CONFIG_ARM_CPU_SUSPEND)	+= sleep.o suspend.o
 obj-$(CONFIG_HIBERNATION)	+= hibernate.o
@@ -88,7 +88,7 @@ obj-$(CONFIG_VDSO)		+= vdso.o
 obj-$(CONFIG_EFI)		+= efi.o
 obj-$(CONFIG_PARAVIRT)	+= paravirt.o
 
-head-y			:= head$(MMUEXT).o
+obj-y			+= head$(MMUEXT).o
 obj-$(CONFIG_DEBUG_LL)	+= debug.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 obj-$(CONFIG_ARM_PATCH_PHYS_VIRT)	+= phys2virt.o
@@ -106,4 +106,6 @@ endif
 
 obj-$(CONFIG_HAVE_ARM_SMCCC)	+= smccc-call.o
 
-extra-y := $(head-y) vmlinux.lds
+obj-$(CONFIG_GENERIC_CPU_VULNERABILITIES) += spectre.o
+
+extra-y := vmlinux.lds
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c
index 645845e4982a..2c8d76fd7c66 100644
--- a/arch/arm/kernel/asm-offsets.c
+++ b/arch/arm/kernel/asm-offsets.c
@@ -43,9 +43,6 @@ int main(void)
   BLANK();
   DEFINE(TI_FLAGS,		offsetof(struct thread_info, flags));
   DEFINE(TI_PREEMPT,		offsetof(struct thread_info, preempt_count));
-#ifndef CONFIG_THREAD_INFO_IN_TASK
-  DEFINE(TI_TASK,		offsetof(struct thread_info, task));
-#endif
   DEFINE(TI_CPU,		offsetof(struct thread_info, cpu));
   DEFINE(TI_CPU_DOMAIN,		offsetof(struct thread_info, cpu_domain));
   DEFINE(TI_CPU_SAVE,		offsetof(struct thread_info, cpu_context));
diff --git a/arch/arm/kernel/crash_dump.c b/arch/arm/kernel/crash_dump.c
index 53cb92435392..938bd932df9a 100644
--- a/arch/arm/kernel/crash_dump.c
+++ b/arch/arm/kernel/crash_dump.c
@@ -14,22 +14,10 @@
 #include <linux/crash_dump.h>
 #include <linux/uaccess.h>
 #include <linux/io.h>
+#include <linux/uio.h>
 
-/**
- * copy_oldmem_page() - copy one page from old kernel memory
- * @pfn: page frame number to be copied
- * @buf: buffer where the copied page is placed
- * @csize: number of bytes to copy
- * @offset: offset in bytes into the page
- * @userbuf: if set, @buf is int he user address space
- *
- * This function copies one page from old kernel memory into buffer pointed by
- * @buf. If @buf is in userspace, set @userbuf to %1. Returns number of bytes
- * copied or negative error in case of failure.
- */
-ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
-			 size_t csize, unsigned long offset,
-			 int userbuf)
+ssize_t copy_oldmem_page(struct iov_iter *iter, unsigned long pfn,
+			 size_t csize, unsigned long offset)
 {
 	void *vaddr;
 
@@ -40,14 +28,7 @@ ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
 	if (!vaddr)
 		return -ENOMEM;
 
-	if (userbuf) {
-		if (copy_to_user(buf, vaddr + offset, csize)) {
-			iounmap(vaddr);
-			return -EFAULT;
-		}
-	} else {
-		memcpy(buf, vaddr + offset, csize);
-	}
+	csize = copy_to_iter(vaddr + offset, csize, iter);
 
 	iounmap(vaddr);
 	return csize;
diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c
index 02839d8b6202..264827281113 100644
--- a/arch/arm/kernel/devtree.c
+++ b/arch/arm/kernel/devtree.c
@@ -194,14 +194,12 @@ const struct machine_desc * __init setup_machine_fdt(void *dt_virt)
 {
 	const struct machine_desc *mdesc, *mdesc_best = NULL;
 
-#if defined(CONFIG_ARCH_MULTIPLATFORM) || defined(CONFIG_ARM_SINGLE_ARMV7M)
 	DT_MACHINE_START(GENERIC_DT, "Generic DT based system")
 		.l2c_aux_val = 0x0,
 		.l2c_aux_mask = ~0x0,
 	MACHINE_END
 
 	mdesc_best = &__mach_desc_GENERIC_DT;
-#endif
 
 	if (!dt_virt || !early_init_dt_verify(dt_virt))
 		return NULL;
diff --git a/arch/arm/kernel/efi.c b/arch/arm/kernel/efi.c
index e57dbcc89123..e50ad7eefc02 100644
--- a/arch/arm/kernel/efi.c
+++ b/arch/arm/kernel/efi.c
@@ -4,6 +4,7 @@
  */
 
 #include <linux/efi.h>
+#include <linux/memblock.h>
 #include <asm/efi.h>
 #include <asm/mach/map.h>
 #include <asm/mmu_context.h>
@@ -73,3 +74,81 @@ int __init efi_create_mapping(struct mm_struct *mm, efi_memory_desc_t *md)
 		return efi_set_mapping_permissions(mm, md);
 	return 0;
 }
+
+static unsigned long __initdata screen_info_table = EFI_INVALID_TABLE_ADDR;
+static unsigned long __initdata cpu_state_table = EFI_INVALID_TABLE_ADDR;
+
+const efi_config_table_type_t efi_arch_tables[] __initconst = {
+	{LINUX_EFI_ARM_SCREEN_INFO_TABLE_GUID, &screen_info_table},
+	{LINUX_EFI_ARM_CPU_STATE_TABLE_GUID, &cpu_state_table},
+	{}
+};
+
+static void __init load_screen_info_table(void)
+{
+	struct screen_info *si;
+
+	if (screen_info_table != EFI_INVALID_TABLE_ADDR) {
+		si = early_memremap_ro(screen_info_table, sizeof(*si));
+		if (!si) {
+			pr_err("Could not map screen_info config table\n");
+			return;
+		}
+		screen_info = *si;
+		early_memunmap(si, sizeof(*si));
+
+		/* dummycon on ARM needs non-zero values for columns/lines */
+		screen_info.orig_video_cols = 80;
+		screen_info.orig_video_lines = 25;
+
+		if (memblock_is_map_memory(screen_info.lfb_base))
+			memblock_mark_nomap(screen_info.lfb_base,
+					    screen_info.lfb_size);
+	}
+}
+
+static void __init load_cpu_state_table(void)
+{
+	if (cpu_state_table != EFI_INVALID_TABLE_ADDR) {
+		struct efi_arm_entry_state *state;
+		bool dump_state = true;
+
+		state = early_memremap_ro(cpu_state_table,
+					  sizeof(struct efi_arm_entry_state));
+		if (state == NULL) {
+			pr_warn("Unable to map CPU entry state table.\n");
+			return;
+		}
+
+		if ((state->sctlr_before_ebs & 1) == 0)
+			pr_warn(FW_BUG "EFI stub was entered with MMU and Dcache disabled, please fix your firmware!\n");
+		else if ((state->sctlr_after_ebs & 1) == 0)
+			pr_warn(FW_BUG "ExitBootServices() returned with MMU and Dcache disabled, please fix your firmware!\n");
+		else
+			dump_state = false;
+
+		if (dump_state || efi_enabled(EFI_DBG)) {
+			pr_info("CPSR at EFI stub entry        : 0x%08x\n",
+				state->cpsr_before_ebs);
+			pr_info("SCTLR at EFI stub entry       : 0x%08x\n",
+				state->sctlr_before_ebs);
+			pr_info("CPSR after ExitBootServices() : 0x%08x\n",
+				state->cpsr_after_ebs);
+			pr_info("SCTLR after ExitBootServices(): 0x%08x\n",
+				state->sctlr_after_ebs);
+		}
+		early_memunmap(state, sizeof(struct efi_arm_entry_state));
+	}
+}
+
+void __init arm_efi_init(void)
+{
+	efi_init();
+
+	load_screen_info_table();
+
+	/* ARM does not permit early mappings to persist across paging_init() */
+	efi_memmap_unmap();
+
+	load_cpu_state_table();
+}
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 5cd057859fe9..c39303e5c234 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -19,9 +19,6 @@
 #include <asm/glue-df.h>
 #include <asm/glue-pf.h>
 #include <asm/vfpmacros.h>
-#ifndef CONFIG_GENERIC_IRQ_MULTI_HANDLER
-#include <mach/entry-macro.S>
-#endif
 #include <asm/thread_notify.h>
 #include <asm/unwind.h>
 #include <asm/unistd.h>
@@ -30,27 +27,42 @@
 #include <asm/uaccess-asm.h>
 
 #include "entry-header.S"
-#include <asm/entry-macro-multi.S>
 #include <asm/probes.h>
 
 /*
  * Interrupt handling.
  */
-	.macro	irq_handler
-#ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER
-	mov	r0, sp
-	bl	generic_handle_arch_irq
-#else
-	arch_irq_handler_default
+	.macro	irq_handler, from_user:req
+	mov	r1, sp
+	ldr_this_cpu r2, irq_stack_ptr, r2, r3
+	.if	\from_user == 0
+	@
+	@ If we took the interrupt while running in the kernel, we may already
+	@ be using the IRQ stack, so revert to the original value in that case.
+	@
+	subs	r3, r2, r1		@ SP above bottom of IRQ stack?
+	rsbscs	r3, r3, #THREAD_SIZE	@ ... and below the top?
+#ifdef CONFIG_VMAP_STACK
+	ldr_va	r3, high_memory, cc	@ End of the linear region
+	cmpcc	r3, r1			@ Stack pointer was below it?
 #endif
+	bcc	0f			@ If not, switch to the IRQ stack
+	mov	r0, r1
+	bl	generic_handle_arch_irq
+	b	1f
+0:
+	.endif
+
+	mov_l	r0, generic_handle_arch_irq
+	bl	call_with_stack
+1:
 	.endm
 
 	.macro	pabt_helper
 	@ PABORT handler takes pt_regs in r2, fault address in r4 and psr in r5
 #ifdef MULTI_PABORT
-	ldr	ip, .LCprocfns
-	mov	lr, pc
-	ldr	pc, [ip, #PROCESSOR_PABT_FUNC]
+	ldr_va	ip, processor, offset=PROCESSOR_PABT_FUNC
+	bl_r	ip
 #else
 	bl	CPU_PABORT_HANDLER
 #endif
@@ -69,9 +81,8 @@
 	@ the fault status register in r1.  r9 must be preserved.
 	@
 #ifdef MULTI_DABORT
-	ldr	ip, .LCprocfns
-	mov	lr, pc
-	ldr	pc, [ip, #PROCESSOR_DABT_FUNC]
+	ldr_va	ip, processor, offset=PROCESSOR_DABT_FUNC
+	bl_r	ip
 #else
 	bl	CPU_DABORT_HANDLER
 #endif
@@ -140,27 +151,35 @@ ENDPROC(__und_invalid)
 #define SPFIX(code...)
 #endif
 
-	.macro	svc_entry, stack_hole=0, trace=1, uaccess=1
+	.macro	svc_entry, stack_hole=0, trace=1, uaccess=1, overflow_check=1
  UNWIND(.fnstart		)
- UNWIND(.save {r0 - pc}		)
-	sub	sp, sp, #(SVC_REGS_SIZE + \stack_hole - 4)
+	sub	sp, sp, #(SVC_REGS_SIZE + \stack_hole)
+ THUMB(	add	sp, r1		)	@ get SP in a GPR without
+ THUMB(	sub	r1, sp, r1	)	@ using a temp register
+
+	.if	\overflow_check
+ UNWIND(.save	{r0 - pc}	)
+	do_overflow_check (SVC_REGS_SIZE + \stack_hole)
+	.endif
+
 #ifdef CONFIG_THUMB2_KERNEL
- SPFIX(	str	r0, [sp]	)	@ temporarily saved
- SPFIX(	mov	r0, sp		)
- SPFIX(	tst	r0, #4		)	@ test original stack alignment
- SPFIX(	ldr	r0, [sp]	)	@ restored
+	tst	r1, #4			@ test stack pointer alignment
+	sub	r1, sp, r1		@ restore original R1
+	sub	sp, r1			@ restore original SP
 #else
  SPFIX(	tst	sp, #4		)
 #endif
- SPFIX(	subeq	sp, sp, #4	)
-	stmia	sp, {r1 - r12}
+ SPFIX(	subne	sp, sp, #4	)
+
+ ARM(	stmib	sp, {r1 - r12}	)
+ THUMB(	stmia	sp, {r0 - r12}	)	@ No STMIB in Thumb-2
 
 	ldmia	r0, {r3 - r5}
-	add	r7, sp, #S_SP - 4	@ here for interlock avoidance
+	add	r7, sp, #S_SP		@ here for interlock avoidance
 	mov	r6, #-1			@  ""  ""      ""       ""
-	add	r2, sp, #(SVC_REGS_SIZE + \stack_hole - 4)
- SPFIX(	addeq	r2, r2, #4	)
-	str	r3, [sp, #-4]!		@ save the "real" r0 copied
+	add	r2, sp, #(SVC_REGS_SIZE + \stack_hole)
+ SPFIX(	addne	r2, r2, #4	)
+	str	r3, [sp]		@ save the "real" r0 copied
 					@ from the exception stack
 
 	mov	r3, lr
@@ -199,7 +218,7 @@ ENDPROC(__dabt_svc)
 	.align	5
 __irq_svc:
 	svc_entry
-	irq_handler
+	irq_handler from_user=0
 
 #ifdef CONFIG_PREEMPTION
 	ldr	r8, [tsk, #TI_PREEMPT]		@ get preempt count
@@ -281,16 +300,6 @@ __fiq_svc:
  UNWIND(.fnend		)
 ENDPROC(__fiq_svc)
 
-	.align	5
-.LCcralign:
-	.word	cr_alignment
-#ifdef MULTI_DABORT
-.LCprocfns:
-	.word	processor
-#endif
-.LCfp:
-	.word	fp_enter
-
 /*
  * Abort mode handlers
  */
@@ -349,7 +358,7 @@ ENDPROC(__fiq_abt)
  THUMB(	stmia	sp, {r0 - r12}	)
 
  ATRAP(	mrc	p15, 0, r7, c1, c0, 0)
- ATRAP(	ldr	r8, .LCcralign)
+ ATRAP(	ldr_va	r8, cr_alignment)
 
 	ldmia	r0, {r3 - r5}
 	add	r0, sp, #S_PC		@ here for interlock avoidance
@@ -358,8 +367,6 @@ ENDPROC(__fiq_abt)
 	str	r3, [sp]		@ save the "real" r0 copied
 					@ from the exception stack
 
- ATRAP(	ldr	r8, [r8, #0])
-
 	@
 	@ We are now ready to fill in the remaining blanks on the stack:
 	@
@@ -426,7 +433,7 @@ ENDPROC(__dabt_usr)
 __irq_usr:
 	usr_entry
 	kuser_cmpxchg_check
-	irq_handler
+	irq_handler from_user=1
 	get_thread_info tsk
 	mov	why, #0
 	b	ret_to_user_from_irq
@@ -484,9 +491,7 @@ __und_usr_thumb:
  */
 #if __LINUX_ARM_ARCH__ < 7
 /* If the target CPU may not be Thumb-2-capable, a run-time check is needed: */
-#define NEED_CPU_ARCHITECTURE
-	ldr	r5, .LCcpu_architecture
-	ldr	r5, [r5]
+	ldr_va	r5, cpu_architecture
 	cmp	r5, #CPU_ARCH_ARMv7
 	blo	__und_usr_fault_16		@ 16bit undefined instruction
 /*
@@ -633,12 +638,6 @@ call_fpe:
 	ret.w	lr				@ CP#14 (Debug)
 	ret.w	lr				@ CP#15 (Control)
 
-#ifdef NEED_CPU_ARCHITECTURE
-	.align	2
-.LCcpu_architecture:
-	.word	__cpu_architecture
-#endif
-
 #ifdef CONFIG_NEON
 	.align	6
 
@@ -664,9 +663,8 @@ call_fpe:
 #endif
 
 do_fpe:
-	ldr	r4, .LCfp
 	add	r10, r10, #TI_FPSTATE		@ r10 = workspace
-	ldr	pc, [r4]			@ Call FP module USR entry point
+	ldr_va	pc, fp_enter, tmp=r4		@ Call FP module USR entry point
 
 /*
  * The FP module is called with these registers set:
@@ -752,16 +750,17 @@ ENTRY(__switch_to)
 	ldr	r6, [r2, #TI_CPU_DOMAIN]
 #endif
 	switch_tls r1, r4, r5, r3, r7
-#if defined(CONFIG_STACKPROTECTOR) && !defined(CONFIG_SMP)
-	ldr	r7, [r2, #TI_TASK]
+#if defined(CONFIG_STACKPROTECTOR) && !defined(CONFIG_SMP) && \
+    !defined(CONFIG_STACKPROTECTOR_PER_TASK)
 	ldr	r8, =__stack_chk_guard
 	.if (TSK_STACK_CANARY > IMM12_MASK)
-	add	r7, r7, #TSK_STACK_CANARY & ~IMM12_MASK
+	add	r9, r2, #TSK_STACK_CANARY & ~IMM12_MASK
+	ldr	r9, [r9, #TSK_STACK_CANARY & IMM12_MASK]
+	.else
+	ldr	r9, [r2, #TSK_STACK_CANARY & IMM12_MASK]
 	.endif
-	ldr	r7, [r7, #TSK_STACK_CANARY & IMM12_MASK]
-#elif defined(CONFIG_CURRENT_POINTER_IN_TPIDRURO)
-	mov	r7, r2				@ Preserve 'next'
 #endif
+	mov	r7, r2				@ Preserve 'next'
 #ifdef CONFIG_CPU_USE_DOMAINS
 	mcr	p15, 0, r6, c3, c0, 0		@ Set domain register
 #endif
@@ -770,19 +769,102 @@ ENTRY(__switch_to)
 	ldr	r0, =thread_notify_head
 	mov	r1, #THREAD_NOTIFY_SWITCH
 	bl	atomic_notifier_call_chain
-#if defined(CONFIG_STACKPROTECTOR) && !defined(CONFIG_SMP)
-	str	r7, [r8]
+#if defined(CONFIG_STACKPROTECTOR) && !defined(CONFIG_SMP) && \
+    !defined(CONFIG_STACKPROTECTOR_PER_TASK)
+	str	r9, [r8]
 #endif
- THUMB(	mov	ip, r4			   )
 	mov	r0, r5
-	set_current r7
- ARM(	ldmia	r4, {r4 - sl, fp, sp, pc}  )	@ Load all regs saved previously
- THUMB(	ldmia	ip!, {r4 - sl, fp}	   )	@ Load all regs saved previously
- THUMB(	ldr	sp, [ip], #4		   )
- THUMB(	ldr	pc, [ip]		   )
+#if !defined(CONFIG_THUMB2_KERNEL) && !defined(CONFIG_VMAP_STACK)
+	set_current r7, r8
+	ldmia	r4, {r4 - sl, fp, sp, pc}	@ Load all regs saved previously
+#else
+	mov	r1, r7
+	ldmia	r4, {r4 - sl, fp, ip, lr}	@ Load all regs saved previously
+#ifdef CONFIG_VMAP_STACK
+	@
+	@ Do a dummy read from the new stack while running from the old one so
+	@ that we can rely on do_translation_fault() to fix up any stale PMD
+	@ entries covering the vmalloc region.
+	@
+	ldr	r2, [ip]
+#endif
+
+	@ When CONFIG_THREAD_INFO_IN_TASK=n, the update of SP itself is what
+	@ effectuates the task switch, as that is what causes the observable
+	@ values of current and current_thread_info to change. When
+	@ CONFIG_THREAD_INFO_IN_TASK=y, setting current (and therefore
+	@ current_thread_info) is done explicitly, and the update of SP just
+	@ switches us to another stack, with few other side effects. In order
+	@ to prevent this distinction from causing any inconsistencies, let's
+	@ keep the 'set_current' call as close as we can to the update of SP.
+	set_current r1, r2
+	mov	sp, ip
+	ret	lr
+#endif
  UNWIND(.fnend		)
 ENDPROC(__switch_to)
 
+#ifdef CONFIG_VMAP_STACK
+	.text
+	.align	2
+__bad_stack:
+	@
+	@ We've just detected an overflow. We need to load the address of this
+	@ CPU's overflow stack into the stack pointer register. We have only one
+	@ scratch register so let's use a sequence of ADDs including one
+	@ involving the PC, and decorate them with PC-relative group
+	@ relocations. As these are ARM only, switch to ARM mode first.
+	@
+	@ We enter here with IP clobbered and its value stashed on the mode
+	@ stack.
+	@
+THUMB(	bx	pc		)
+THUMB(	nop			)
+THUMB(	.arm			)
+	ldr_this_cpu_armv6 ip, overflow_stack_ptr
+
+	str	sp, [ip, #-4]!			@ Preserve original SP value
+	mov	sp, ip				@ Switch to overflow stack
+	pop	{ip}				@ Original SP in IP
+
+#if defined(CONFIG_UNWINDER_FRAME_POINTER) && defined(CONFIG_CC_IS_GCC)
+	mov	ip, ip				@ mov expected by unwinder
+	push	{fp, ip, lr, pc}		@ GCC flavor frame record
+#else
+	str	ip, [sp, #-8]!			@ store original SP
+	push	{fpreg, lr}			@ Clang flavor frame record
+#endif
+UNWIND( ldr	ip, [r0, #4]	)		@ load exception LR
+UNWIND( str	ip, [sp, #12]	)		@ store in the frame record
+	ldr	ip, [r0, #12]			@ reload IP
+
+	@ Store the original GPRs to the new stack.
+	svc_entry uaccess=0, overflow_check=0
+
+UNWIND( .save   {sp, pc}	)
+UNWIND( .save   {fpreg, lr}	)
+UNWIND( .setfp  fpreg, sp	)
+
+	ldr	fpreg, [sp, #S_SP]		@ Add our frame record
+						@ to the linked list
+#if defined(CONFIG_UNWINDER_FRAME_POINTER) && defined(CONFIG_CC_IS_GCC)
+	ldr	r1, [fp, #4]			@ reload SP at entry
+	add	fp, fp, #12
+#else
+	ldr	r1, [fpreg, #8]
+#endif
+	str	r1, [sp, #S_SP]			@ store in pt_regs
+
+	@ Stash the regs for handle_bad_stack
+	mov	r0, sp
+
+	@ Time to die
+	bl	handle_bad_stack
+	nop
+UNWIND( .fnend			)
+ENDPROC(__bad_stack)
+#endif
+
 	__INIT
 
 /*
@@ -996,17 +1078,23 @@ __kuser_helper_end:
  */
 	.macro	vector_stub, name, mode, correction=0
 	.align	5
+#ifdef CONFIG_HARDEN_BRANCH_HISTORY
+vector_bhb_bpiall_\name:
+	mcr	p15, 0, r0, c7, c5, 6	@ BPIALL
+	@ isb not needed due to "movs pc, lr" in the vector stub
+	@ which gives a "context synchronisation".
+#endif
 
 vector_\name:
 	.if \correction
 	sub	lr, lr, #\correction
 	.endif
 
-	@
-	@ Save r0, lr_<exception> (parent PC) and spsr_<exception>
-	@ (parent CPSR)
-	@
+	@ Save r0, lr_<exception> (parent PC)
 	stmia	sp, {r0, lr}		@ save r0, lr
+
+	@ Save spsr_<exception> (parent CPSR)
+.Lvec_\name:
 	mrs	lr, spsr
 	str	lr, [sp, #8]		@ save spsr
 
@@ -1028,14 +1116,47 @@ vector_\name:
 	movs	pc, lr			@ branch to handler in SVC mode
 ENDPROC(vector_\name)
 
+#ifdef CONFIG_HARDEN_BRANCH_HISTORY
+	.subsection 1
+	.align 5
+vector_bhb_loop8_\name:
+	.if \correction
+	sub	lr, lr, #\correction
+	.endif
+
+	@ Save r0, lr_<exception> (parent PC)
+	stmia	sp, {r0, lr}
+
+	@ bhb workaround
+	mov	r0, #8
+3:	W(b)	. + 4
+	subs	r0, r0, #1
+	bne	3b
+	dsb	nsh
+	@ isb not needed due to "movs pc, lr" in the vector stub
+	@ which gives a "context synchronisation".
+	b	.Lvec_\name
+ENDPROC(vector_bhb_loop8_\name)
+	.previous
+#endif
+
 	.align	2
 	@ handler addresses follow this label
 1:
 	.endm
 
 	.section .stubs, "ax", %progbits
-	@ This must be the first word
+	@ These need to remain at the start of the section so that
+	@ they are in range of the 'SWI' entries in the vector tables
+	@ located 4k down.
+.L__vector_swi:
 	.word	vector_swi
+#ifdef CONFIG_HARDEN_BRANCH_HISTORY
+.L__vector_bhb_loop8_swi:
+	.word	vector_bhb_loop8_swi
+.L__vector_bhb_bpiall_swi:
+	.word	vector_bhb_bpiall_swi
+#endif
 
 vector_rst:
  ARM(	swi	SYS_ERROR0	)
@@ -1150,8 +1271,10 @@ vector_addrexcptn:
  * FIQ "NMI" handler
  *-----------------------------------------------------------------------------
  * Handle a FIQ using the SVC stack allowing FIQ act like NMI on x86
- * systems.
+ * systems. This must be the last vector stub, so lets place it in its own
+ * subsection.
  */
+	.subsection 2
 	vector_stub	fiq, FIQ_MODE, 4
 
 	.long	__fiq_usr			@  0  (USR_26 / USR_32)
@@ -1174,16 +1297,43 @@ vector_addrexcptn:
 	.globl	vector_fiq
 
 	.section .vectors, "ax", %progbits
-.L__vectors_start:
 	W(b)	vector_rst
 	W(b)	vector_und
-	W(ldr)	pc, .L__vectors_start + 0x1000
+ARM(	.reloc	., R_ARM_LDR_PC_G0, .L__vector_swi		)
+THUMB(	.reloc	., R_ARM_THM_PC12, .L__vector_swi		)
+	W(ldr)	pc, .
 	W(b)	vector_pabt
 	W(b)	vector_dabt
 	W(b)	vector_addrexcptn
 	W(b)	vector_irq
 	W(b)	vector_fiq
 
+#ifdef CONFIG_HARDEN_BRANCH_HISTORY
+	.section .vectors.bhb.loop8, "ax", %progbits
+	W(b)	vector_rst
+	W(b)	vector_bhb_loop8_und
+ARM(	.reloc	., R_ARM_LDR_PC_G0, .L__vector_bhb_loop8_swi	)
+THUMB(	.reloc	., R_ARM_THM_PC12, .L__vector_bhb_loop8_swi	)
+	W(ldr)	pc, .
+	W(b)	vector_bhb_loop8_pabt
+	W(b)	vector_bhb_loop8_dabt
+	W(b)	vector_addrexcptn
+	W(b)	vector_bhb_loop8_irq
+	W(b)	vector_bhb_loop8_fiq
+
+	.section .vectors.bhb.bpiall, "ax", %progbits
+	W(b)	vector_rst
+	W(b)	vector_bhb_bpiall_und
+ARM(	.reloc	., R_ARM_LDR_PC_G0, .L__vector_bhb_bpiall_swi	)
+THUMB(	.reloc	., R_ARM_THM_PC12, .L__vector_bhb_bpiall_swi	)
+	W(ldr)	pc, .
+	W(b)	vector_bhb_bpiall_pabt
+	W(b)	vector_bhb_bpiall_dabt
+	W(b)	vector_addrexcptn
+	W(b)	vector_bhb_bpiall_irq
+	W(b)	vector_bhb_bpiall_fiq
+#endif
+
 	.data
 	.align	2
 
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index ac86c34682bb..405a607b754f 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -16,17 +16,19 @@
 
 	.equ	NR_syscalls, __NR_syscalls
 
-#ifdef CONFIG_NEED_RET_TO_USER
-#include <mach/entry-macro.S>
-#else
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
+	.macro  arch_ret_to_user, tmp
+#ifdef CONFIG_ARCH_IOP32X
+	mrc	p15, 0, \tmp, c15, c1, 0
+	tst	\tmp, #(1 << 6)
+	bicne	\tmp, \tmp, #(1 << 6)
+	mcrne	p15, 0, \tmp, c15, c1, 0	@ Disable cp6 access
 #endif
+	.endm
 
 #include "entry-header.S"
 
 saved_psr	.req	r8
-#if defined(CONFIG_TRACE_IRQFLAGS) || defined(CONFIG_CONTEXT_TRACKING)
+#if defined(CONFIG_TRACE_IRQFLAGS) || defined(CONFIG_CONTEXT_TRACKING_USER)
 saved_pc	.req	r9
 #define TRACE(x...) x
 #else
@@ -36,7 +38,7 @@ saved_pc	.req	lr
 
 	.section .entry.text,"ax",%progbits
 	.align	5
-#if !(IS_ENABLED(CONFIG_TRACE_IRQFLAGS) || IS_ENABLED(CONFIG_CONTEXT_TRACKING) || \
+#if !(IS_ENABLED(CONFIG_TRACE_IRQFLAGS) || IS_ENABLED(CONFIG_CONTEXT_TRACKING_USER) || \
 	IS_ENABLED(CONFIG_DEBUG_RSEQ))
 /*
  * This is the fast syscall return path.  We do as little as possible here,
@@ -55,7 +57,7 @@ __ret_fast_syscall:
 
 
 	/* perform architecture specific actions before user return */
-	arch_ret_to_user r1, lr
+	arch_ret_to_user r1
 
 	restore_user_regs fast = 1, offset = S_OFF
  UNWIND(.fnend		)
@@ -128,7 +130,7 @@ no_work_pending:
 	asm_trace_hardirqs_on save = 0
 
 	/* perform architecture specific actions before user return */
-	arch_ret_to_user r1, lr
+	arch_ret_to_user r1
 	ct_user_enter save = 0
 
 	restore_user_regs fast = 0, offset = 0
@@ -154,12 +156,36 @@ ENDPROC(ret_from_fork)
  */
 
 	.align	5
+#ifdef CONFIG_HARDEN_BRANCH_HISTORY
+ENTRY(vector_bhb_loop8_swi)
+	sub	sp, sp, #PT_REGS_SIZE
+	stmia	sp, {r0 - r12}
+	mov	r8, #8
+1:	b	2f
+2:	subs	r8, r8, #1
+	bne	1b
+	dsb	nsh
+	isb
+	b	3f
+ENDPROC(vector_bhb_loop8_swi)
+
+	.align	5
+ENTRY(vector_bhb_bpiall_swi)
+	sub	sp, sp, #PT_REGS_SIZE
+	stmia	sp, {r0 - r12}
+	mcr	p15, 0, r8, c7, c5, 6	@ BPIALL
+	isb
+	b	3f
+ENDPROC(vector_bhb_bpiall_swi)
+#endif
+	.align	5
 ENTRY(vector_swi)
 #ifdef CONFIG_CPU_V7M
 	v7m_exception_entry
 #else
 	sub	sp, sp, #PT_REGS_SIZE
 	stmia	sp, {r0 - r12}			@ Calling r0 - r12
+3:
  ARM(	add	r8, sp, #S_PC		)
  ARM(	stmdb	r8, {sp, lr}^		)	@ Calling sp, lr
  THUMB(	mov	r8, sp			)
@@ -172,7 +198,7 @@ ENTRY(vector_swi)
 #endif
 	reload_current r10, ip
 	zero_fp
-	alignment_trap r10, ip, __cr_alignment
+	alignment_trap r10, ip, cr_alignment
 	asm_trace_hardirqs_on save=0
 	enable_irq_notrace
 	ct_user_exit save=0
@@ -276,6 +302,7 @@ local_restart:
 	b	ret_fast_syscall
 #endif
 ENDPROC(vector_swi)
+	.ltorg
 
 	/*
 	 * This is the really slow path.  We're going to be doing
@@ -302,14 +329,6 @@ __sys_trace_return:
 	bl	syscall_trace_exit
 	b	ret_slow_syscall
 
-	.align	5
-#ifdef CONFIG_ALIGNMENT_TRAP
-	.type	__cr_alignment, #object
-__cr_alignment:
-	.word	cr_alignment
-#endif
-	.ltorg
-
 	.macro	syscall_table_start, sym
 	.equ	__sys_nr, 0
 	.type	\sym, #object
diff --git a/arch/arm/kernel/entry-ftrace.S b/arch/arm/kernel/entry-ftrace.S
index a74289ebc803..3e7bcaca5e07 100644
--- a/arch/arm/kernel/entry-ftrace.S
+++ b/arch/arm/kernel/entry-ftrace.S
@@ -22,12 +22,9 @@
  * mcount can be thought of as a function called in the middle of a subroutine
  * call.  As such, it needs to be transparent for both the caller and the
  * callee: the original lr needs to be restored when leaving mcount, and no
- * registers should be clobbered.  (In the __gnu_mcount_nc implementation, we
- * clobber the ip register.  This is OK because the ARM calling convention
- * allows it to be clobbered in subroutines and doesn't use it to hold
- * parameters.)
+ * registers should be clobbered.
  *
- * When using dynamic ftrace, we patch out the mcount call by a "pop {lr}"
+ * When using dynamic ftrace, we patch out the mcount call by a "add sp, #4"
  * instead of the __gnu_mcount_nc call (see arch/arm/kernel/ftrace.c).
  */
 
@@ -38,23 +35,20 @@
 
 .macro __mcount suffix
 	mcount_enter
-	ldr	r0, =ftrace_trace_function
-	ldr	r2, [r0]
-	adr	r0, .Lftrace_stub
+	ldr_va	r2, ftrace_trace_function
+	badr	r0, .Lftrace_stub
 	cmp	r0, r2
 	bne	1f
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	ldr     r1, =ftrace_graph_return
-	ldr     r2, [r1]
-	cmp     r0, r2
-	bne     ftrace_graph_caller\suffix
-
-	ldr     r1, =ftrace_graph_entry
-	ldr     r2, [r1]
-	ldr     r0, =ftrace_graph_entry_stub
-	cmp     r0, r2
-	bne     ftrace_graph_caller\suffix
+	ldr_va	r2, ftrace_graph_return
+	cmp	r0, r2
+	bne	ftrace_graph_caller\suffix
+
+	ldr_va	r2, ftrace_graph_entry
+	mov_l	r0, ftrace_graph_entry_stub
+	cmp	r0, r2
+	bne	ftrace_graph_caller\suffix
 #endif
 
 	mcount_exit
@@ -70,29 +64,27 @@
 
 .macro __ftrace_regs_caller
 
-	sub	sp, sp, #8	@ space for PC and CPSR OLD_R0,
+	str	lr, [sp, #-8]!	@ store LR as PC and make space for CPSR/OLD_R0,
 				@ OLD_R0 will overwrite previous LR
 
-	add 	ip, sp, #12	@ move in IP the value of SP as it was
-				@ before the push {lr} of the mcount mechanism
+	ldr	lr, [sp, #8]    @ get previous LR
 
-	str     lr, [sp, #0]    @ store LR instead of PC
+	str	r0, [sp, #8]	@ write r0 as OLD_R0 over previous LR
 
-	ldr     lr, [sp, #8]    @ get previous LR
+	str	lr, [sp, #-4]!	@ store previous LR as LR
 
-	str	r0, [sp, #8]	@ write r0 as OLD_R0 over previous LR
+	add 	lr, sp, #16	@ move in LR the value of SP as it was
+				@ before the push {lr} of the mcount mechanism
 
-	stmdb   sp!, {ip, lr}
-	stmdb   sp!, {r0-r11, lr}
+	push	{r0-r11, ip, lr}
 
 	@ stack content at this point:
 	@ 0  4          48   52       56            60   64    68       72
-	@ R0 | R1 | ... | LR | SP + 4 | previous LR | LR | PSR | OLD_R0 |
+	@ R0 | R1 | ... | IP | SP + 4 | previous LR | LR | PSR | OLD_R0 |
 
-	mov r3, sp				@ struct pt_regs*
+	mov	r3, sp				@ struct pt_regs*
 
-	ldr r2, =function_trace_op
-	ldr r2, [r2]				@ pointer to the current
+	ldr_va	r2, function_trace_op		@ pointer to the current
 						@ function tracing op
 
 	ldr	r1, [sp, #S_LR]			@ lr of instrumented func
@@ -108,35 +100,37 @@ ftrace_regs_call:
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 	.globl ftrace_graph_regs_call
 ftrace_graph_regs_call:
-	mov	r0, r0
+ARM(	mov	r0, r0	)
+THUMB(	nop.w		)
 #endif
 
 	@ pop saved regs
-	ldmia   sp!, {r0-r12}			@ restore r0 through r12
-	ldr	ip, [sp, #8]			@ restore PC
-	ldr	lr, [sp, #4]			@ restore LR
-	ldr	sp, [sp, #0]			@ restore SP
-	mov	pc, ip				@ return
+	pop	{r0-r11, ip, lr}		@ restore r0 through r12
+	ldr	lr, [sp], #4			@ restore LR
+	ldr	pc, [sp], #12
 .endm
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 .macro __ftrace_graph_regs_caller
 
-	sub     r0, fp, #4              @ lr of instrumented routine (parent)
+#ifdef CONFIG_UNWINDER_FRAME_POINTER
+	sub	r0, fp, #4		@ lr of instrumented routine (parent)
+#else
+	add	r0, sp, #S_LR
+#endif
 
 	@ called from __ftrace_regs_caller
-	ldr     r1, [sp, #S_PC]		@ instrumented routine (func)
+	ldr	r1, [sp, #S_PC]		@ instrumented routine (func)
 	mcount_adjust_addr	r1, r1
 
-	mov	r2, fp			@ frame pointer
+	mov	r2, fpreg		@ frame pointer
+	add	r3, sp, #PT_REGS_SIZE
 	bl	prepare_ftrace_return
 
 	@ pop registers saved in ftrace_regs_caller
-	ldmia   sp!, {r0-r12}			@ restore r0 through r12
-	ldr	ip, [sp, #8]			@ restore PC
-	ldr	lr, [sp, #4]			@ restore LR
-	ldr	sp, [sp, #0]			@ restore SP
-	mov	pc, ip				@ return
+	pop	{r0-r11, ip, lr}		@ restore r0 through r12
+	ldr	lr, [sp], #4			@ restore LR
+	ldr	pc, [sp], #12
 
 .endm
 #endif
@@ -149,8 +143,7 @@ ftrace_graph_regs_call:
 	mcount_adjust_addr	r0, lr		@ instrumented function
 
 #ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
-	ldr r2, =function_trace_op
-	ldr r2, [r2]				@ pointer to the current
+	ldr_va	r2, function_trace_op		@ pointer to the current
 						@ function tracing op
 	mov r3, #0				@ regs is NULL
 #endif
@@ -162,14 +155,19 @@ ftrace_call\suffix:
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 	.globl ftrace_graph_call\suffix
 ftrace_graph_call\suffix:
-	mov	r0, r0
+ARM(	mov	r0, r0	)
+THUMB(	nop.w		)
 #endif
 
 	mcount_exit
 .endm
 
 .macro __ftrace_graph_caller
+#ifdef CONFIG_UNWINDER_FRAME_POINTER
 	sub	r0, fp, #4		@ &lr of instrumented routine (&parent)
+#else
+	add	r0, sp, #20
+#endif
 #ifdef CONFIG_DYNAMIC_FTRACE
 	@ called from __ftrace_caller, saved in mcount_enter
 	ldr	r1, [sp, #16]		@ instrumented routine (func)
@@ -178,7 +176,8 @@ ftrace_graph_call\suffix:
 	@ called from __mcount, untouched in lr
 	mcount_adjust_addr	r1, lr	@ instrumented routine (func)
 #endif
-	mov	r2, fp			@ frame pointer
+	mov	r2, fpreg		@ frame pointer
+	add	r3, sp, #24
 	bl	prepare_ftrace_return
 	mcount_exit
 .endm
@@ -202,16 +201,17 @@ ftrace_graph_call\suffix:
 .endm
 
 .macro mcount_exit
-	ldmia	sp!, {r0-r3, ip, lr}
-	ret	ip
+	ldmia	sp!, {r0-r3}
+	ldr	lr, [sp, #4]
+	ldr	pc, [sp], #8
 .endm
 
 ENTRY(__gnu_mcount_nc)
 UNWIND(.fnstart)
 #ifdef CONFIG_DYNAMIC_FTRACE
-	mov	ip, lr
-	ldmia	sp!, {lr}
-	ret	ip
+	push	{lr}
+	ldr	lr, [sp, #4]
+	ldr	pc, [sp], #8
 #else
 	__mcount
 #endif
@@ -256,17 +256,33 @@ ENDPROC(ftrace_graph_regs_caller)
 .purgem mcount_exit
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	.globl return_to_handler
-return_to_handler:
+ENTRY(return_to_handler)
 	stmdb	sp!, {r0-r3}
-	mov	r0, fp			@ frame pointer
+	add	r0, sp, #16		@ sp at exit of instrumented routine
 	bl	ftrace_return_to_handler
 	mov	lr, r0			@ r0 has real ret addr
 	ldmia	sp!, {r0-r3}
 	ret	lr
+ENDPROC(return_to_handler)
 #endif
 
 ENTRY(ftrace_stub)
 .Lftrace_stub:
 	ret	lr
 ENDPROC(ftrace_stub)
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+
+	__INIT
+
+	.macro	init_tramp, dst:req
+ENTRY(\dst\()_from_init)
+	ldr	pc, =\dst
+ENDPROC(\dst\()_from_init)
+	.endm
+
+	init_tramp	ftrace_caller
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
+	init_tramp	ftrace_regs_caller
+#endif
+#endif
diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S
index ae24dd54e9ef..99411fa91350 100644
--- a/arch/arm/kernel/entry-header.S
+++ b/arch/arm/kernel/entry-header.S
@@ -48,8 +48,7 @@
 	.macro	alignment_trap, rtmp1, rtmp2, label
 #ifdef CONFIG_ALIGNMENT_TRAP
 	mrc	p15, 0, \rtmp2, c1, c0, 0
-	ldr	\rtmp1, \label
-	ldr	\rtmp1, [\rtmp1]
+	ldr_va	\rtmp1, \label
 	teq	\rtmp1, \rtmp2
 	mcrne	p15, 0, \rtmp1, c1, c0, 0
 #endif
@@ -292,12 +291,18 @@
 
 
 	.macro	restore_user_regs, fast = 0, offset = 0
-#if defined(CONFIG_CPU_32v6K) && !defined(CONFIG_CPU_V6)
+#if defined(CONFIG_CPU_32v6K) && \
+    (!defined(CONFIG_CPU_V6) || defined(CONFIG_SMP))
+#ifdef CONFIG_CPU_V6
+ALT_SMP(nop)
+ALT_UP_B(.L1_\@)
+#endif
 	@ The TLS register update is deferred until return to user space so we
 	@ can use it for other things while running in the kernel
-	get_thread_info r1
+	mrc	p15, 0, r1, c13, c0, 3		@ get current_thread_info pointer
 	ldr	r1, [r1, #TI_TP_VALUE]
 	mcr	p15, 0, r1, c13, c0, 3		@ set TLS register
+.L1_\@:
 #endif
 
 	uaccess_enable r1, isb=0
@@ -361,25 +366,25 @@
  * between user and kernel mode.
  */
 	.macro ct_user_exit, save = 1
-#ifdef CONFIG_CONTEXT_TRACKING
+#ifdef CONFIG_CONTEXT_TRACKING_USER
 	.if	\save
 	stmdb   sp!, {r0-r3, ip, lr}
-	bl	context_tracking_user_exit
+	bl	user_exit_callable
 	ldmia	sp!, {r0-r3, ip, lr}
 	.else
-	bl	context_tracking_user_exit
+	bl	user_exit_callable
 	.endif
 #endif
 	.endm
 
 	.macro ct_user_enter, save = 1
-#ifdef CONFIG_CONTEXT_TRACKING
+#ifdef CONFIG_CONTEXT_TRACKING_USER
 	.if	\save
 	stmdb   sp!, {r0-r3, ip, lr}
-	bl	context_tracking_user_enter
+	bl	user_enter_callable
 	ldmia	sp!, {r0-r3, ip, lr}
 	.else
-	bl	context_tracking_user_enter
+	bl	user_enter_callable
 	.endif
 #endif
 	.endm
@@ -423,3 +428,40 @@ scno	.req	r7		@ syscall number
 tbl	.req	r8		@ syscall table pointer
 why	.req	r8		@ Linux syscall (!= 0)
 tsk	.req	r9		@ current thread_info
+
+	.macro	do_overflow_check, frame_size:req
+#ifdef CONFIG_VMAP_STACK
+	@
+	@ Test whether the SP has overflowed. Task and IRQ stacks are aligned
+	@ so that SP & BIT(THREAD_SIZE_ORDER + PAGE_SHIFT) should always be
+	@ zero.
+	@
+ARM(	tst	sp, #1 << (THREAD_SIZE_ORDER + PAGE_SHIFT)	)
+THUMB(	tst	r1, #1 << (THREAD_SIZE_ORDER + PAGE_SHIFT)	)
+THUMB(	it	ne						)
+	bne	.Lstack_overflow_check\@
+
+	.pushsection	.text
+.Lstack_overflow_check\@:
+	@
+	@ The stack pointer is not pointing to a valid vmap'ed stack, but it
+	@ may be pointing into the linear map instead, which may happen if we
+	@ are already running from the overflow stack. We cannot detect overflow
+	@ in such cases so just carry on.
+	@
+	str	ip, [r0, #12]			@ Stash IP on the mode stack
+	ldr_va	ip, high_memory			@ Start of VMALLOC space
+ARM(	cmp	sp, ip			)	@ SP in vmalloc space?
+THUMB(	cmp	r1, ip			)
+THUMB(	itt	lo			)
+	ldrlo	ip, [r0, #12]			@ Restore IP
+	blo	.Lout\@				@ Carry on
+
+THUMB(	sub	r1, sp, r1		)	@ Restore original R1
+THUMB(	sub	sp, r1			)	@ Restore original SP
+	add	sp, sp, #\frame_size		@ Undo svc_entry's SP change
+	b	__bad_stack			@ Handle VMAP stack overflow
+	.popsection
+.Lout\@:
+#endif
+	.endm
diff --git a/arch/arm/kernel/entry-v7m.S b/arch/arm/kernel/entry-v7m.S
index 7bde93c10962..de8a60363c85 100644
--- a/arch/arm/kernel/entry-v7m.S
+++ b/arch/arm/kernel/entry-v7m.S
@@ -39,16 +39,25 @@ __irq_entry:
 	@
 	@ Invoke the IRQ handler
 	@
-	mrs	r0, ipsr
-	ldr	r1, =V7M_xPSR_EXCEPTIONNO
-	and	r0, r1
-	sub	r0, #16
-	mov	r1, sp
-	stmdb	sp!, {lr}
-	@ routine called with r0 = irq number, r1 = struct pt_regs *
-	bl	nvic_handle_irq
-
-	pop	{lr}
+	mov	r0, sp
+	ldr_this_cpu sp, irq_stack_ptr, r1, r2
+
+	@
+	@ If we took the interrupt while running in the kernel, we may already
+	@ be using the IRQ stack, so revert to the original value in that case.
+	@
+	subs	r2, sp, r0		@ SP above bottom of IRQ stack?
+	rsbscs	r2, r2, #THREAD_SIZE	@ ... and below the top?
+	movcs	sp, r0
+
+	push	{r0, lr}		@ preserve LR and original SP
+
+	@ routine called with r0 = struct pt_regs *
+	bl	generic_handle_arch_irq
+
+	pop	{r0, lr}
+	mov	sp, r0
+
 	@
 	@ Check for any pending work if returning to user
 	@
@@ -101,15 +110,17 @@ ENTRY(__switch_to)
 	str	sp, [ip], #4
 	str	lr, [ip], #4
 	mov	r5, r0
+	mov	r6, r2			@ Preserve 'next'
 	add	r4, r2, #TI_CPU_SAVE
 	ldr	r0, =thread_notify_head
 	mov	r1, #THREAD_NOTIFY_SWITCH
 	bl	atomic_notifier_call_chain
-	mov	ip, r4
 	mov	r0, r5
-	ldmia	ip!, {r4 - r11}		@ Load all regs saved previously
-	ldr	sp, [ip]
-	ldr	pc, [ip, #4]!
+	mov	r1, r6
+	ldmia	r4, {r4 - r12, lr}	@ Load all regs saved previously
+	set_current r1, r2
+	mov	sp, ip
+	bx	lr
 	.fnend
 ENDPROC(__switch_to)
 
diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c
index a006585e1c09..a0b6d1e3812f 100644
--- a/arch/arm/kernel/ftrace.c
+++ b/arch/arm/kernel/ftrace.c
@@ -22,12 +22,24 @@
 #include <asm/ftrace.h>
 #include <asm/insn.h>
 #include <asm/set_memory.h>
+#include <asm/stacktrace.h>
 #include <asm/patch.h>
 
+/*
+ * The compiler emitted profiling hook consists of
+ *
+ *   PUSH    {LR}
+ *   BL	     __gnu_mcount_nc
+ *
+ * To turn this combined sequence into a NOP, we need to restore the value of
+ * SP before the PUSH. Let's use an ADD rather than a POP into LR, as LR is not
+ * modified anyway, and reloading LR from memory is highly likely to be less
+ * efficient.
+ */
 #ifdef CONFIG_THUMB2_KERNEL
-#define	NOP		0xf85deb04	/* pop.w {lr} */
+#define	NOP		0xf10d0d04	/* add.w sp, sp, #4 */
 #else
-#define	NOP		0xe8bd4000	/* pop {lr} */
+#define	NOP		0xe28dd004	/* add   sp, sp, #4 */
 #endif
 
 #ifdef CONFIG_DYNAMIC_FTRACE
@@ -51,21 +63,30 @@ static unsigned long ftrace_nop_replace(struct dyn_ftrace *rec)
 	return NOP;
 }
 
-static unsigned long adjust_address(struct dyn_ftrace *rec, unsigned long addr)
+void ftrace_caller_from_init(void);
+void ftrace_regs_caller_from_init(void);
+
+static unsigned long __ref adjust_address(struct dyn_ftrace *rec,
+					  unsigned long addr)
 {
-	return addr;
+	if (!IS_ENABLED(CONFIG_DYNAMIC_FTRACE) ||
+	    system_state >= SYSTEM_FREEING_INITMEM ||
+	    likely(!is_kernel_inittext(rec->ip)))
+		return addr;
+	if (!IS_ENABLED(CONFIG_DYNAMIC_FTRACE_WITH_REGS) ||
+	    addr == (unsigned long)&ftrace_caller)
+		return (unsigned long)&ftrace_caller_from_init;
+	return (unsigned long)&ftrace_regs_caller_from_init;
 }
 
-int ftrace_arch_code_modify_prepare(void)
+void ftrace_arch_code_modify_prepare(void)
 {
-	return 0;
 }
 
-int ftrace_arch_code_modify_post_process(void)
+void ftrace_arch_code_modify_post_process(void)
 {
 	/* Make sure any TLB misses during machine stop are cleared. */
 	flush_tlb_all();
-	return 0;
 }
 
 static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr,
@@ -189,15 +210,23 @@ int ftrace_make_nop(struct module *mod,
 #endif
 
 	new = ftrace_nop_replace(rec);
-	ret = ftrace_modify_code(ip, old, new, true);
+	/*
+	 * Locations in .init.text may call __gnu_mcount_mc via a linker
+	 * emitted veneer if they are too far away from its implementation, and
+	 * so validation may fail spuriously in such cases. Let's work around
+	 * this by omitting those from validation.
+	 */
+	ret = ftrace_modify_code(ip, old, new, !is_kernel_inittext(ip));
 
 	return ret;
 }
 #endif /* CONFIG_DYNAMIC_FTRACE */
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
+asmlinkage
 void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
-			   unsigned long frame_pointer)
+			   unsigned long frame_pointer,
+			   unsigned long stack_pointer)
 {
 	unsigned long return_hooker = (unsigned long) &return_to_handler;
 	unsigned long old;
@@ -205,6 +234,23 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 	if (unlikely(atomic_read(&current->tracing_graph_pause)))
 		return;
 
+	if (IS_ENABLED(CONFIG_UNWINDER_FRAME_POINTER)) {
+		/* FP points one word below parent's top of stack */
+		frame_pointer += 4;
+	} else {
+		struct stackframe frame = {
+			.fp = frame_pointer,
+			.sp = stack_pointer,
+			.lr = self_addr,
+			.pc = self_addr,
+		};
+		if (unwind_frame(&frame) < 0)
+			return;
+		if (frame.lr != self_addr)
+			parent = frame.lr_addr;
+		frame_pointer = frame.sp;
+	}
+
 	old = *parent;
 	*parent = return_hooker;
 
@@ -225,7 +271,7 @@ static int __ftrace_modify_caller(unsigned long *callsite,
 	unsigned long caller_fn = (unsigned long) func;
 	unsigned long pc = (unsigned long) callsite;
 	unsigned long branch = arm_gen_branch(pc, caller_fn);
-	unsigned long nop = 0xe1a00000;	/* mov r0, r0 */
+	unsigned long nop = arm_gen_nop();
 	unsigned long old = enable ? nop : branch;
 	unsigned long new = enable ? branch : nop;
 
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index da18e0a17dc2..42cae73fcc19 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -105,10 +105,8 @@ __mmap_switched:
 	mov	r1, #0
 	bl	__memset			@ clear .bss
 
-#ifdef CONFIG_CURRENT_POINTER_IN_TPIDRURO
 	adr_l	r0, init_task			@ get swapper task_struct
-	set_current r0
-#endif
+	set_current r0, r1
 
 	ldmia	r4, {r0, r1, r2, r3}
 	str	r9, [r0]			@ Save processor ID
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index c04dd94630c7..29e2900178a1 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -38,10 +38,10 @@
 #ifdef CONFIG_ARM_LPAE
 	/* LPAE requires an additional page for the PGD */
 #define PG_DIR_SIZE	0x5000
-#define PMD_ORDER	3
+#define PMD_ENTRY_ORDER	3	/* PMD entry size is 2^PMD_ENTRY_ORDER */
 #else
 #define PG_DIR_SIZE	0x4000
-#define PMD_ORDER	2
+#define PMD_ENTRY_ORDER	2
 #endif
 
 	.globl	swapper_pg_dir
@@ -240,7 +240,7 @@ __create_page_tables:
 	mov	r6, r6, lsr #SECTION_SHIFT
 
 1:	orr	r3, r7, r5, lsl #SECTION_SHIFT	@ flags + kernel base
-	str	r3, [r4, r5, lsl #PMD_ORDER]	@ identity mapping
+	str	r3, [r4, r5, lsl #PMD_ENTRY_ORDER]	@ identity mapping
 	cmp	r5, r6
 	addlo	r5, r5, #1			@ next section
 	blo	1b
@@ -250,7 +250,7 @@ __create_page_tables:
 	 * set two variables to indicate the physical start and end of the
 	 * kernel.
 	 */
-	add	r0, r4, #KERNEL_OFFSET >> (SECTION_SHIFT - PMD_ORDER)
+	add	r0, r4, #KERNEL_OFFSET >> (SECTION_SHIFT - PMD_ENTRY_ORDER)
 	ldr	r6, =(_end - 1)
 	adr_l	r5, kernel_sec_start		@ _pa(kernel_sec_start)
 #if defined CONFIG_CPU_ENDIAN_BE8 || defined CONFIG_CPU_ENDIAN_BE32
@@ -259,8 +259,8 @@ __create_page_tables:
 	str	r8, [r5]			@ Save physical start of kernel (LE)
 #endif
 	orr	r3, r8, r7			@ Add the MMU flags
-	add	r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ORDER)
-1:	str	r3, [r0], #1 << PMD_ORDER
+	add	r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ENTRY_ORDER)
+1:	str	r3, [r0], #1 << PMD_ENTRY_ORDER
 	add	r3, r3, #1 << SECTION_SHIFT
 	cmp	r0, r6
 	bls	1b
@@ -280,14 +280,14 @@ __create_page_tables:
 	mov	r3, pc
 	mov	r3, r3, lsr #SECTION_SHIFT
 	orr	r3, r7, r3, lsl #SECTION_SHIFT
-	add	r0, r4,  #(XIP_START & 0xff000000) >> (SECTION_SHIFT - PMD_ORDER)
-	str	r3, [r0, #((XIP_START & 0x00f00000) >> SECTION_SHIFT) << PMD_ORDER]!
+	add	r0, r4,  #(XIP_START & 0xff000000) >> (SECTION_SHIFT - PMD_ENTRY_ORDER)
+	str	r3, [r0, #((XIP_START & 0x00f00000) >> SECTION_SHIFT) << PMD_ENTRY_ORDER]!
 	ldr	r6, =(_edata_loc - 1)
-	add	r0, r0, #1 << PMD_ORDER
-	add	r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ORDER)
+	add	r0, r0, #1 << PMD_ENTRY_ORDER
+	add	r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ENTRY_ORDER)
 1:	cmp	r0, r6
 	add	r3, r3, #1 << SECTION_SHIFT
-	strls	r3, [r0], #1 << PMD_ORDER
+	strls	r3, [r0], #1 << PMD_ENTRY_ORDER
 	bls	1b
 #endif
 
@@ -297,10 +297,10 @@ __create_page_tables:
 	 */
 	mov	r0, r2, lsr #SECTION_SHIFT
 	cmp	r2, #0
-	ldrne	r3, =FDT_FIXED_BASE >> (SECTION_SHIFT - PMD_ORDER)
+	ldrne	r3, =FDT_FIXED_BASE >> (SECTION_SHIFT - PMD_ENTRY_ORDER)
 	addne	r3, r3, r4
 	orrne	r6, r7, r0, lsl #SECTION_SHIFT
-	strne	r6, [r3], #1 << PMD_ORDER
+	strne	r6, [r3], #1 << PMD_ENTRY_ORDER
 	addne	r6, r6, #1 << SECTION_SHIFT
 	strne	r6, [r3]
 
@@ -319,7 +319,7 @@ __create_page_tables:
 	addruart r7, r3, r0
 
 	mov	r3, r3, lsr #SECTION_SHIFT
-	mov	r3, r3, lsl #PMD_ORDER
+	mov	r3, r3, lsl #PMD_ENTRY_ORDER
 
 	add	r0, r4, r3
 	mov	r3, r7, lsr #SECTION_SHIFT
@@ -349,7 +349,7 @@ __create_page_tables:
 	 * If we're using the NetWinder or CATS, we also need to map
 	 * in the 16550-type serial port for the debug messages
 	 */
-	add	r0, r4, #0xff000000 >> (SECTION_SHIFT - PMD_ORDER)
+	add	r0, r4, #0xff000000 >> (SECTION_SHIFT - PMD_ENTRY_ORDER)
 	orr	r3, r7, #0x7c000000
 	str	r3, [r0]
 #endif
@@ -359,10 +359,10 @@ __create_page_tables:
 	 * Similar reasons here - for debug.  This is
 	 * only for Acorn RiscPC architectures.
 	 */
-	add	r0, r4, #0x02000000 >> (SECTION_SHIFT - PMD_ORDER)
+	add	r0, r4, #0x02000000 >> (SECTION_SHIFT - PMD_ENTRY_ORDER)
 	orr	r3, r7, #0x02000000
 	str	r3, [r0]
-	add	r0, r4, #0xd8000000 >> (SECTION_SHIFT - PMD_ORDER)
+	add	r0, r4, #0xd8000000 >> (SECTION_SHIFT - PMD_ENTRY_ORDER)
 	str	r3, [r0]
 #endif
 #endif
@@ -424,6 +424,13 @@ ENDPROC(secondary_startup)
 ENDPROC(secondary_startup_arm)
 
 ENTRY(__secondary_switched)
+#if defined(CONFIG_VMAP_STACK) && !defined(CONFIG_ARM_LPAE)
+	@ Before using the vmap'ed stack, we have to switch to swapper_pg_dir
+	@ as the ID map does not cover the vmalloc region.
+	mrc	p15, 0, ip, c2, c0, 1	@ read TTBR1
+	mcr	p15, 0, ip, c2, c0, 0	@ set TTBR0
+	instr_sync
+#endif
 	adr_l	r7, secondary_data + 12		@ get secondary_data.stack
 	ldr	sp, [r7]
 	ldr	r0, [r7, #4]			@ get secondary_data.task
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index b1423fb130ea..054e9199f30d 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -941,6 +941,23 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr,
 	return ret;
 }
 
+#ifdef CONFIG_ARM_ERRATA_764319
+static int oslsr_fault;
+
+static int debug_oslsr_trap(struct pt_regs *regs, unsigned int instr)
+{
+	oslsr_fault = 1;
+	instruction_pointer(regs) += 4;
+	return 0;
+}
+
+static struct undef_hook debug_oslsr_hook = {
+	.instr_mask  = 0xffffffff,
+	.instr_val = 0xee115e91,
+	.fn = debug_oslsr_trap,
+};
+#endif
+
 /*
  * One-time initialisation.
  */
@@ -974,7 +991,16 @@ static bool core_has_os_save_restore(void)
 	case ARM_DEBUG_ARCH_V7_1:
 		return true;
 	case ARM_DEBUG_ARCH_V7_ECP14:
+#ifdef CONFIG_ARM_ERRATA_764319
+		oslsr_fault = 0;
+		register_undef_hook(&debug_oslsr_hook);
 		ARM_DBG_READ(c1, c1, 4, oslsr);
+		unregister_undef_hook(&debug_oslsr_hook);
+		if (oslsr_fault)
+			return false;
+#else
+		ARM_DBG_READ(c1, c1, 4, oslsr);
+#endif
 		if (oslsr & ARM_OSLSR_OSLM0)
 			return true;
 		fallthrough;
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index b79975bd988c..fe28fc1f759d 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -36,13 +36,54 @@
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/hardware/cache-uniphier.h>
 #include <asm/outercache.h>
+#include <asm/softirq_stack.h>
 #include <asm/exception.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
+#include "reboot.h"
+
 unsigned long irq_err_count;
 
+#ifdef CONFIG_IRQSTACKS
+
+asmlinkage DEFINE_PER_CPU_READ_MOSTLY(u8 *, irq_stack_ptr);
+
+static void __init init_irq_stacks(void)
+{
+	u8 *stack;
+	int cpu;
+
+	for_each_possible_cpu(cpu) {
+		if (!IS_ENABLED(CONFIG_VMAP_STACK))
+			stack = (u8 *)__get_free_pages(GFP_KERNEL,
+						       THREAD_SIZE_ORDER);
+		else
+			stack = __vmalloc_node(THREAD_SIZE, THREAD_ALIGN,
+					       THREADINFO_GFP, NUMA_NO_NODE,
+					       __builtin_return_address(0));
+
+		if (WARN_ON(!stack))
+			break;
+		per_cpu(irq_stack_ptr, cpu) = &stack[THREAD_SIZE];
+	}
+}
+
+#ifdef CONFIG_SOFTIRQ_ON_OWN_STACK
+static void ____do_softirq(void *arg)
+{
+	__do_softirq();
+}
+
+void do_softirq_own_stack(void)
+{
+	call_with_stack(____do_softirq, NULL,
+			__this_cpu_read(irq_stack_ptr));
+}
+#endif
+#endif
+
 int arch_show_interrupts(struct seq_file *p, int prec)
 {
 #ifdef CONFIG_FIQ
@@ -80,27 +121,14 @@ void handle_IRQ(unsigned int irq, struct pt_regs *regs)
 		ack_bad_irq(irq);
 }
 
-/*
- * asm_do_IRQ is the interface to be used from assembly code.
- */
-asmlinkage void __exception_irq_entry
-asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
-{
-	struct pt_regs *old_regs;
-
-	irq_enter();
-	old_regs = set_irq_regs(regs);
-
-	handle_IRQ(irq, regs);
-
-	set_irq_regs(old_regs);
-	irq_exit();
-}
-
 void __init init_IRQ(void)
 {
 	int ret;
 
+#ifdef CONFIG_IRQSTACKS
+	init_irq_stacks();
+#endif
+
 	if (IS_ENABLED(CONFIG_OF) && !machine_desc->init_irq)
 		irqchip_init();
 	else
diff --git a/arch/arm/kernel/jump_label.c b/arch/arm/kernel/jump_label.c
index 303b3ab87f7e..eb9c24b6e8e2 100644
--- a/arch/arm/kernel/jump_label.c
+++ b/arch/arm/kernel/jump_label.c
@@ -27,9 +27,3 @@ void arch_jump_label_transform(struct jump_entry *entry,
 {
 	__arch_jump_label_transform(entry, type, false);
 }
-
-void arch_jump_label_transform_static(struct jump_entry *entry,
-				      enum jump_label_type type)
-{
-	__arch_jump_label_transform(entry, type, true);
-}
diff --git a/arch/arm/kernel/kgdb.c b/arch/arm/kernel/kgdb.c
index 7bd30c0a4280..22f937e6f3ff 100644
--- a/arch/arm/kernel/kgdb.c
+++ b/arch/arm/kernel/kgdb.c
@@ -154,22 +154,38 @@ static int kgdb_compiled_brk_fn(struct pt_regs *regs, unsigned int instr)
 	return 0;
 }
 
-static struct undef_hook kgdb_brkpt_hook = {
+static struct undef_hook kgdb_brkpt_arm_hook = {
 	.instr_mask		= 0xffffffff,
 	.instr_val		= KGDB_BREAKINST,
-	.cpsr_mask		= MODE_MASK,
+	.cpsr_mask		= PSR_T_BIT | MODE_MASK,
 	.cpsr_val		= SVC_MODE,
 	.fn			= kgdb_brk_fn
 };
 
-static struct undef_hook kgdb_compiled_brkpt_hook = {
+static struct undef_hook kgdb_brkpt_thumb_hook = {
+	.instr_mask		= 0xffff,
+	.instr_val		= KGDB_BREAKINST & 0xffff,
+	.cpsr_mask		= PSR_T_BIT | MODE_MASK,
+	.cpsr_val		= PSR_T_BIT | SVC_MODE,
+	.fn			= kgdb_brk_fn
+};
+
+static struct undef_hook kgdb_compiled_brkpt_arm_hook = {
 	.instr_mask		= 0xffffffff,
 	.instr_val		= KGDB_COMPILED_BREAK,
-	.cpsr_mask		= MODE_MASK,
+	.cpsr_mask		= PSR_T_BIT | MODE_MASK,
 	.cpsr_val		= SVC_MODE,
 	.fn			= kgdb_compiled_brk_fn
 };
 
+static struct undef_hook kgdb_compiled_brkpt_thumb_hook = {
+	.instr_mask		= 0xffff,
+	.instr_val		= KGDB_COMPILED_BREAK & 0xffff,
+	.cpsr_mask		= PSR_T_BIT | MODE_MASK,
+	.cpsr_val		= PSR_T_BIT | SVC_MODE,
+	.fn			= kgdb_compiled_brk_fn
+};
+
 static int __kgdb_notify(struct die_args *args, unsigned long cmd)
 {
 	struct pt_regs *regs = args->regs;
@@ -210,8 +226,10 @@ int kgdb_arch_init(void)
 	if (ret != 0)
 		return ret;
 
-	register_undef_hook(&kgdb_brkpt_hook);
-	register_undef_hook(&kgdb_compiled_brkpt_hook);
+	register_undef_hook(&kgdb_brkpt_arm_hook);
+	register_undef_hook(&kgdb_brkpt_thumb_hook);
+	register_undef_hook(&kgdb_compiled_brkpt_arm_hook);
+	register_undef_hook(&kgdb_compiled_brkpt_thumb_hook);
 
 	return 0;
 }
@@ -224,8 +242,10 @@ int kgdb_arch_init(void)
  */
 void kgdb_arch_exit(void)
 {
-	unregister_undef_hook(&kgdb_brkpt_hook);
-	unregister_undef_hook(&kgdb_compiled_brkpt_hook);
+	unregister_undef_hook(&kgdb_brkpt_arm_hook);
+	unregister_undef_hook(&kgdb_brkpt_thumb_hook);
+	unregister_undef_hook(&kgdb_compiled_brkpt_arm_hook);
+	unregister_undef_hook(&kgdb_compiled_brkpt_thumb_hook);
 	unregister_die_notifier(&kgdb_notifier);
 }
 
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index beac45e89ba6..d59c36dc0494 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -68,6 +68,44 @@ bool module_exit_section(const char *name)
 		strstarts(name, ".ARM.exidx.exit");
 }
 
+#ifdef CONFIG_ARM_HAS_GROUP_RELOCS
+/*
+ * This implements the partitioning algorithm for group relocations as
+ * documented in the ARM AArch32 ELF psABI (IHI 0044).
+ *
+ * A single PC-relative symbol reference is divided in up to 3 add or subtract
+ * operations, where the final one could be incorporated into a load/store
+ * instruction with immediate offset. E.g.,
+ *
+ *   ADD	Rd, PC, #...		or	ADD	Rd, PC, #...
+ *   ADD	Rd, Rd, #...			ADD	Rd, Rd, #...
+ *   LDR	Rd, [Rd, #...]			ADD	Rd, Rd, #...
+ *
+ * The latter has a guaranteed range of only 16 MiB (3x8 == 24 bits), so it is
+ * of limited use in the kernel. However, the ADD/ADD/LDR combo has a range of
+ * -/+ 256 MiB, (2x8 + 12 == 28 bits), which means it has sufficient range for
+ * any in-kernel symbol reference (unless module PLTs are being used).
+ *
+ * The main advantage of this approach over the typical pattern using a literal
+ * load is that literal loads may miss in the D-cache, and generally lead to
+ * lower cache efficiency for variables that are referenced often from many
+ * different places in the code.
+ */
+static u32 get_group_rem(u32 group, u32 *offset)
+{
+	u32 val = *offset;
+	u32 shift;
+	do {
+		shift = val ? (31 - __fls(val)) & ~1 : 32;
+		*offset = val;
+		if (!val)
+			break;
+		val &= 0xffffff >> shift;
+	} while (group--);
+	return shift;
+}
+#endif
+
 int
 apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 	       unsigned int relindex, struct module *module)
@@ -82,6 +120,9 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 		unsigned long loc;
 		Elf32_Sym *sym;
 		const char *symname;
+#ifdef CONFIG_ARM_HAS_GROUP_RELOCS
+		u32 shift, group = 1;
+#endif
 		s32 offset;
 		u32 tmp;
 #ifdef CONFIG_THUMB2_KERNEL
@@ -212,6 +253,55 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 			*(u32 *)loc = __opcode_to_mem_arm(tmp);
 			break;
 
+#ifdef CONFIG_ARM_HAS_GROUP_RELOCS
+		case R_ARM_ALU_PC_G0_NC:
+			group = 0;
+			fallthrough;
+		case R_ARM_ALU_PC_G1_NC:
+			tmp = __mem_to_opcode_arm(*(u32 *)loc);
+			offset = ror32(tmp & 0xff, (tmp & 0xf00) >> 7);
+			if (tmp & BIT(22))
+				offset = -offset;
+			offset += sym->st_value - loc;
+			if (offset < 0) {
+				offset = -offset;
+				tmp = (tmp & ~BIT(23)) | BIT(22); // SUB opcode
+			} else {
+				tmp = (tmp & ~BIT(22)) | BIT(23); // ADD opcode
+			}
+
+			shift = get_group_rem(group, &offset);
+			if (shift < 24) {
+				offset >>= 24 - shift;
+				offset |= (shift + 8) << 7;
+			}
+			*(u32 *)loc = __opcode_to_mem_arm((tmp & ~0xfff) | offset);
+			break;
+
+		case R_ARM_LDR_PC_G2:
+			tmp = __mem_to_opcode_arm(*(u32 *)loc);
+			offset = tmp & 0xfff;
+			if (~tmp & BIT(23))		// U bit cleared?
+				offset = -offset;
+			offset += sym->st_value - loc;
+			if (offset < 0) {
+				offset = -offset;
+				tmp &= ~BIT(23);	// clear U bit
+			} else {
+				tmp |= BIT(23);		// set U bit
+			}
+			get_group_rem(2, &offset);
+
+			if (offset > 0xfff) {
+				pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n",
+				       module->name, relindex, i, symname,
+				       ELF32_R_TYPE(rel->r_info), loc,
+				       sym->st_value);
+				return -ENOEXEC;
+			}
+			*(u32 *)loc = __opcode_to_mem_arm((tmp & ~0xfff) | offset);
+			break;
+#endif
 #ifdef CONFIG_THUMB2_KERNEL
 		case R_ARM_THM_CALL:
 		case R_ARM_THM_JUMP24:
@@ -369,46 +459,40 @@ int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs,
 #ifdef CONFIG_ARM_UNWIND
 	const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
 	const Elf_Shdr *sechdrs_end = sechdrs + hdr->e_shnum;
-	struct mod_unwind_map maps[ARM_SEC_MAX];
-	int i;
+	struct list_head *unwind_list = &mod->arch.unwind_list;
 
-	memset(maps, 0, sizeof(maps));
+	INIT_LIST_HEAD(unwind_list);
+	mod->arch.init_table = NULL;
 
 	for (s = sechdrs; s < sechdrs_end; s++) {
 		const char *secname = secstrs + s->sh_name;
+		const char *txtname;
+		const Elf_Shdr *txt_sec;
 
-		if (!(s->sh_flags & SHF_ALLOC))
+		if (!(s->sh_flags & SHF_ALLOC) ||
+		    s->sh_type != ELF_SECTION_UNWIND)
 			continue;
 
-		if (strcmp(".ARM.exidx.init.text", secname) == 0)
-			maps[ARM_SEC_INIT].unw_sec = s;
-		else if (strcmp(".ARM.exidx", secname) == 0)
-			maps[ARM_SEC_CORE].unw_sec = s;
-		else if (strcmp(".ARM.exidx.exit.text", secname) == 0)
-			maps[ARM_SEC_EXIT].unw_sec = s;
-		else if (strcmp(".ARM.exidx.text.unlikely", secname) == 0)
-			maps[ARM_SEC_UNLIKELY].unw_sec = s;
-		else if (strcmp(".ARM.exidx.text.hot", secname) == 0)
-			maps[ARM_SEC_HOT].unw_sec = s;
-		else if (strcmp(".init.text", secname) == 0)
-			maps[ARM_SEC_INIT].txt_sec = s;
-		else if (strcmp(".text", secname) == 0)
-			maps[ARM_SEC_CORE].txt_sec = s;
-		else if (strcmp(".exit.text", secname) == 0)
-			maps[ARM_SEC_EXIT].txt_sec = s;
-		else if (strcmp(".text.unlikely", secname) == 0)
-			maps[ARM_SEC_UNLIKELY].txt_sec = s;
-		else if (strcmp(".text.hot", secname) == 0)
-			maps[ARM_SEC_HOT].txt_sec = s;
-	}
+		if (!strcmp(".ARM.exidx", secname))
+			txtname = ".text";
+		else
+			txtname = secname + strlen(".ARM.exidx");
+		txt_sec = find_mod_section(hdr, sechdrs, txtname);
+
+		if (txt_sec) {
+			struct unwind_table *table =
+				unwind_table_add(s->sh_addr,
+						s->sh_size,
+						txt_sec->sh_addr,
+						txt_sec->sh_size);
+
+			list_add(&table->mod_list, unwind_list);
 
-	for (i = 0; i < ARM_SEC_MAX; i++)
-		if (maps[i].unw_sec && maps[i].txt_sec)
-			mod->arch.unwind[i] =
-				unwind_table_add(maps[i].unw_sec->sh_addr,
-					         maps[i].unw_sec->sh_size,
-					         maps[i].txt_sec->sh_addr,
-					         maps[i].txt_sec->sh_size);
+			/* save init table for module_arch_freeing_init */
+			if (strcmp(".ARM.exidx.init.text", secname) == 0)
+				mod->arch.init_table = table;
+		}
+	}
 #endif
 #ifdef CONFIG_ARM_PATCH_PHYS_VIRT
 	s = find_mod_section(hdr, sechdrs, ".pv_table");
@@ -429,19 +513,27 @@ void
 module_arch_cleanup(struct module *mod)
 {
 #ifdef CONFIG_ARM_UNWIND
-	int i;
+	struct unwind_table *tmp;
+	struct unwind_table *n;
 
-	for (i = 0; i < ARM_SEC_MAX; i++) {
-		unwind_table_del(mod->arch.unwind[i]);
-		mod->arch.unwind[i] = NULL;
+	list_for_each_entry_safe(tmp, n,
+			&mod->arch.unwind_list, mod_list) {
+		list_del(&tmp->mod_list);
+		unwind_table_del(tmp);
 	}
+	mod->arch.init_table = NULL;
 #endif
 }
 
 void __weak module_arch_freeing_init(struct module *mod)
 {
 #ifdef CONFIG_ARM_UNWIND
-	unwind_table_del(mod->arch.unwind[ARM_SEC_INIT]);
-	mod->arch.unwind[ARM_SEC_INIT] = NULL;
+	struct unwind_table *init = mod->arch.init_table;
+
+	if (init) {
+		mod->arch.init_table = NULL;
+		list_del(&init->mod_list);
+		unwind_table_del(init);
+	}
 #endif
 }
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index d47159f3791c..a2b31d91a1b6 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -36,7 +36,7 @@
 
 #include "signal.h"
 
-#ifdef CONFIG_CURRENT_POINTER_IN_TPIDRURO
+#if defined(CONFIG_CURRENT_POINTER_IN_TPIDRURO) || defined(CONFIG_SMP)
 DEFINE_PER_CPU(struct task_struct *, __entry_task);
 #endif
 
@@ -46,6 +46,11 @@ unsigned long __stack_chk_guard __read_mostly;
 EXPORT_SYMBOL(__stack_chk_guard);
 #endif
 
+#ifndef CONFIG_CURRENT_POINTER_IN_TPIDRURO
+asmlinkage struct task_struct *__current;
+EXPORT_SYMBOL(__current);
+#endif
+
 static const char *processor_modes[] __maybe_unused = {
   "USER_26", "FIQ_26" , "IRQ_26" , "SVC_26" , "UK4_26" , "UK5_26" , "UK6_26" , "UK7_26" ,
   "UK8_26" , "UK9_26" , "UK10_26", "UK11_26", "UK12_26", "UK13_26", "UK14_26", "UK15_26",
@@ -196,7 +201,7 @@ void __show_regs(struct pt_regs *regs)
 void show_regs(struct pt_regs * regs)
 {
 	__show_regs(regs);
-	dump_stack();
+	dump_backtrace(regs, NULL, KERN_DEFAULT);
 }
 
 ATOMIC_NOTIFIER_HEAD(thread_notify_head);
@@ -227,15 +232,13 @@ void flush_thread(void)
 	thread_notify(THREAD_NOTIFY_FLUSH, thread);
 }
 
-void release_thread(struct task_struct *dead_task)
-{
-}
-
 asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
 
-int copy_thread(unsigned long clone_flags, unsigned long stack_start,
-		unsigned long stk_sz, struct task_struct *p, unsigned long tls)
+int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 {
+	unsigned long clone_flags = args->flags;
+	unsigned long stack_start = args->stack;
+	unsigned long tls = args->tls;
 	struct thread_info *thread = task_thread_info(p);
 	struct pt_regs *childregs = task_pt_regs(p);
 
@@ -251,15 +254,15 @@ int copy_thread(unsigned long clone_flags, unsigned long stack_start,
 	thread->cpu_domain = get_domain();
 #endif
 
-	if (likely(!(p->flags & (PF_KTHREAD | PF_IO_WORKER)))) {
+	if (likely(!args->fn)) {
 		*childregs = *current_pt_regs();
 		childregs->ARM_r0 = 0;
 		if (stack_start)
 			childregs->ARM_sp = stack_start;
 	} else {
 		memset(childregs, 0, sizeof(struct pt_regs));
-		thread->cpu_context.r4 = stk_sz;
-		thread->cpu_context.r5 = stack_start;
+		thread->cpu_context.r4 = (unsigned long)args->fn_arg;
+		thread->cpu_context.r5 = (unsigned long)args->fn;
 		childregs->ARM_cpsr = SVC_MODE;
 	}
 	thread->cpu_context.pc = (unsigned long)ret_from_fork;
@@ -368,7 +371,7 @@ static unsigned long sigpage_addr(const struct mm_struct *mm,
 
 	slots = ((last - first) >> PAGE_SHIFT) + 1;
 
-	offset = get_random_int() % slots;
+	offset = prandom_u32_max(slots);
 
 	addr = first + (offset << PAGE_SHIFT);
 
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index 43b963ea4a0e..bfe88c6e60d5 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -22,7 +22,6 @@
 #include <linux/hw_breakpoint.h>
 #include <linux/regset.h>
 #include <linux/audit.h>
-#include <linux/tracehook.h>
 #include <linux/unistd.h>
 
 #include <asm/syscall.h>
@@ -831,8 +830,7 @@ enum ptrace_syscall_dir {
 	PTRACE_SYSCALL_EXIT,
 };
 
-static void tracehook_report_syscall(struct pt_regs *regs,
-				    enum ptrace_syscall_dir dir)
+static void report_syscall(struct pt_regs *regs, enum ptrace_syscall_dir dir)
 {
 	unsigned long ip;
 
@@ -844,8 +842,8 @@ static void tracehook_report_syscall(struct pt_regs *regs,
 	regs->ARM_ip = dir;
 
 	if (dir == PTRACE_SYSCALL_EXIT)
-		tracehook_report_syscall_exit(regs, 0);
-	else if (tracehook_report_syscall_entry(regs))
+		ptrace_report_syscall_exit(regs, 0);
+	else if (ptrace_report_syscall_entry(regs))
 		current_thread_info()->abi_syscall = -1;
 
 	regs->ARM_ip = ip;
@@ -856,7 +854,7 @@ asmlinkage int syscall_trace_enter(struct pt_regs *regs)
 	int scno;
 
 	if (test_thread_flag(TIF_SYSCALL_TRACE))
-		tracehook_report_syscall(regs, PTRACE_SYSCALL_ENTER);
+		report_syscall(regs, PTRACE_SYSCALL_ENTER);
 
 	/* Do seccomp after ptrace; syscall may have changed. */
 #ifdef CONFIG_HAVE_ARCH_SECCOMP_FILTER
@@ -897,5 +895,5 @@ asmlinkage void syscall_trace_exit(struct pt_regs *regs)
 		trace_sys_exit(regs, regs_return_value(regs));
 
 	if (test_thread_flag(TIF_SYSCALL_TRACE))
-		tracehook_report_syscall(regs, PTRACE_SYSCALL_EXIT);
+		report_syscall(regs, PTRACE_SYSCALL_EXIT);
 }
diff --git a/arch/arm/kernel/reboot.c b/arch/arm/kernel/reboot.c
index 3044fcb8d073..3f0d5c3dae11 100644
--- a/arch/arm/kernel/reboot.c
+++ b/arch/arm/kernel/reboot.c
@@ -10,6 +10,7 @@
 #include <asm/cacheflush.h>
 #include <asm/idmap.h>
 #include <asm/virt.h>
+#include <asm/system_misc.h>
 
 #include "reboot.h"
 
@@ -116,9 +117,7 @@ void machine_power_off(void)
 {
 	local_irq_disable();
 	smp_send_stop();
-
-	if (pm_power_off)
-		pm_power_off();
+	do_kernel_power_off();
 }
 
 /*
diff --git a/arch/arm/kernel/return_address.c b/arch/arm/kernel/return_address.c
index 00c11579406c..38f1ea9c724d 100644
--- a/arch/arm/kernel/return_address.c
+++ b/arch/arm/kernel/return_address.c
@@ -41,11 +41,13 @@ void *return_address(unsigned int level)
 	frame.fp = (unsigned long)__builtin_frame_address(0);
 	frame.sp = current_stack_pointer;
 	frame.lr = (unsigned long)__builtin_return_address(0);
-	frame.pc = (unsigned long)return_address;
+here:
+	frame.pc = (unsigned long)&&here;
 #ifdef CONFIG_KRETPROBES
 	frame.kr_cur = NULL;
 	frame.tsk = current;
 #endif
+	frame.ex_frame = false;
 
 	walk_stackframe(&frame, save_return_addr, &data);
 
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 284a80c0b6e1..cb88c6e69377 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -141,10 +141,10 @@ EXPORT_SYMBOL(outer_cache);
 int __cpu_architecture __read_mostly = CPU_ARCH_UNKNOWN;
 
 struct stack {
-	u32 irq[3];
-	u32 abt[3];
-	u32 und[3];
-	u32 fiq[3];
+	u32 irq[4];
+	u32 abt[4];
+	u32 und[4];
+	u32 fiq[4];
 } ____cacheline_aligned;
 
 #ifndef CONFIG_CPU_V7M
@@ -1004,7 +1004,8 @@ static void __init reserve_crashkernel(void)
 	total_mem = get_total_mem();
 	ret = parse_crashkernel(boot_command_line, total_mem,
 				&crash_size, &crash_base);
-	if (ret)
+	/* invalid value specified or crashkernel=0 */
+	if (ret || !crash_size)
 		return;
 
 	if (crash_base <= 0) {
@@ -1140,7 +1141,7 @@ void __init setup_arch(char **cmdline_p)
 #endif
 	setup_dma_zone(mdesc);
 	xen_early_init();
-	efi_init();
+	arm_efi_init();
 	/*
 	 * Make sure the calculation for lowmem/highmem is set appropriately
 	 * before reserving/allocating any memory
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index c532a6041066..e07f359254c3 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -9,7 +9,7 @@
 #include <linux/signal.h>
 #include <linux/personality.h>
 #include <linux/uaccess.h>
-#include <linux/tracehook.h>
+#include <linux/resume_user_mode.h>
 #include <linux/uprobes.h>
 #include <linux/syscalls.h>
 
@@ -627,7 +627,7 @@ do_work_pending(struct pt_regs *regs, unsigned int thread_flags, int syscall)
 			} else if (thread_flags & _TIF_UPROBE) {
 				uprobe_notify_resume(regs);
 			} else {
-				tracehook_notify_resume(regs);
+				resume_user_mode_work(regs);
 			}
 		}
 		local_irq_disable();
@@ -655,7 +655,7 @@ struct page *get_signal_page(void)
 		 PAGE_SIZE / sizeof(u32));
 
 	/* Give the signal return code some randomness */
-	offset = 0x200 + (get_random_int() & 0x7fc);
+	offset = 0x200 + (get_random_u16() & 0x7fc);
 	signal_return_offset = offset;
 
 	/* Copy signal return handlers into the page */
@@ -708,6 +708,7 @@ static_assert(offsetof(siginfo_t, si_upper)	== 0x18);
 static_assert(offsetof(siginfo_t, si_pkey)	== 0x14);
 static_assert(offsetof(siginfo_t, si_perf_data)	== 0x10);
 static_assert(offsetof(siginfo_t, si_perf_type)	== 0x14);
+static_assert(offsetof(siginfo_t, si_perf_flags) == 0x18);
 static_assert(offsetof(siginfo_t, si_band)	== 0x0c);
 static_assert(offsetof(siginfo_t, si_fd)	== 0x10);
 static_assert(offsetof(siginfo_t, si_call_addr)	== 0x0c);
diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S
index 43077e11dafd..a86a1d4f3461 100644
--- a/arch/arm/kernel/sleep.S
+++ b/arch/arm/kernel/sleep.S
@@ -67,6 +67,12 @@ ENTRY(__cpu_suspend)
 	ldr	r4, =cpu_suspend_size
 #endif
 	mov	r5, sp			@ current virtual SP
+#ifdef CONFIG_VMAP_STACK
+	@ Run the suspend code from the overflow stack so we don't have to rely
+	@ on vmalloc-to-phys conversions anywhere in the arch suspend code.
+	@ The original SP value captured in R5 will be restored on the way out.
+	ldr_this_cpu sp, overflow_stack_ptr, r6, r7
+#endif
 	add	r4, r4, #12		@ Space for pgd, virt sp, phys resume fn
 	sub	sp, sp, r4		@ allocate CPU state on stack
 	ldr	r3, =sleep_save_sp
@@ -113,6 +119,13 @@ ENTRY(cpu_resume_mmu)
 ENDPROC(cpu_resume_mmu)
 	.popsection
 cpu_resume_after_mmu:
+#if defined(CONFIG_VMAP_STACK) && !defined(CONFIG_ARM_LPAE)
+	@ Before using the vmap'ed stack, we have to switch to swapper_pg_dir
+	@ as the ID map does not cover the vmalloc region.
+	mrc	p15, 0, ip, c2, c0, 1	@ read TTBR1
+	mcr	p15, 0, ip, c2, c0, 0	@ set TTBR0
+	instr_sync
+#endif
 	bl	cpu_init		@ restore the und/abt/irq banked regs
 	mov	r0, #0			@ return zero on success
 	ldmfd	sp!, {r4 - r11, pc}
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 97ee6b1567e9..978db2d96b44 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -400,6 +400,12 @@ static void smp_store_cpu_info(unsigned int cpuid)
 	check_cpu_icache_size(cpuid);
 }
 
+static void set_current(struct task_struct *cur)
+{
+	/* Set TPIDRURO */
+	asm("mcr p15, 0, %0, c13, c0, 3" :: "r"(cur) : "memory");
+}
+
 /*
  * This is the secondary CPU boot entry.  We're using this CPUs
  * idle thread stack, but a set of temporary page tables.
@@ -628,11 +634,6 @@ static void ipi_complete(unsigned int cpu)
 /*
  * Main handler for inter-processor interrupts
  */
-asmlinkage void __exception_irq_entry do_IPI(int ipinr, struct pt_regs *regs)
-{
-	handle_IPI(ipinr, regs);
-}
-
 static void do_handle_IPI(int ipinr)
 {
 	unsigned int cpu = smp_processor_id();
@@ -786,14 +787,6 @@ void panic_smp_self_stop(void)
 		cpu_relax();
 }
 
-/*
- * not supported here
- */
-int setup_profiling_timer(unsigned int multiplier)
-{
-	return -EINVAL;
-}
-
 #ifdef CONFIG_CPU_FREQ
 
 static DEFINE_PER_CPU(unsigned long, l_p_j_ref);
diff --git a/arch/arm/kernel/spectre.c b/arch/arm/kernel/spectre.c
new file mode 100644
index 000000000000..0dcefc36fb7a
--- /dev/null
+++ b/arch/arm/kernel/spectre.c
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/bpf.h>
+#include <linux/cpu.h>
+#include <linux/device.h>
+
+#include <asm/spectre.h>
+
+static bool _unprivileged_ebpf_enabled(void)
+{
+#ifdef CONFIG_BPF_SYSCALL
+	return !sysctl_unprivileged_bpf_disabled;
+#else
+	return false;
+#endif
+}
+
+ssize_t cpu_show_spectre_v1(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	return sprintf(buf, "Mitigation: __user pointer sanitization\n");
+}
+
+static unsigned int spectre_v2_state;
+static unsigned int spectre_v2_methods;
+
+void spectre_v2_update_state(unsigned int state, unsigned int method)
+{
+	if (state > spectre_v2_state)
+		spectre_v2_state = state;
+	spectre_v2_methods |= method;
+}
+
+ssize_t cpu_show_spectre_v2(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	const char *method;
+
+	if (spectre_v2_state == SPECTRE_UNAFFECTED)
+		return sprintf(buf, "%s\n", "Not affected");
+
+	if (spectre_v2_state != SPECTRE_MITIGATED)
+		return sprintf(buf, "%s\n", "Vulnerable");
+
+	if (_unprivileged_ebpf_enabled())
+		return sprintf(buf, "Vulnerable: Unprivileged eBPF enabled\n");
+
+	switch (spectre_v2_methods) {
+	case SPECTRE_V2_METHOD_BPIALL:
+		method = "Branch predictor hardening";
+		break;
+
+	case SPECTRE_V2_METHOD_ICIALLU:
+		method = "I-cache invalidation";
+		break;
+
+	case SPECTRE_V2_METHOD_SMC:
+	case SPECTRE_V2_METHOD_HVC:
+		method = "Firmware call";
+		break;
+
+	case SPECTRE_V2_METHOD_LOOP8:
+		method = "History overwrite";
+		break;
+
+	default:
+		method = "Multiple mitigations";
+		break;
+	}
+
+	return sprintf(buf, "Mitigation: %s\n", method);
+}
diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c
index 75e905508f27..85443b5d1922 100644
--- a/arch/arm/kernel/stacktrace.c
+++ b/arch/arm/kernel/stacktrace.c
@@ -9,6 +9,8 @@
 #include <asm/stacktrace.h>
 #include <asm/traps.h>
 
+#include "reboot.h"
+
 #if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND)
 /*
  * Unwind the current stack frame and store the new register values in the
@@ -39,32 +41,77 @@
  * Note that with framepointer enabled, even the leaf functions have the same
  * prologue and epilogue, therefore we can ignore the LR value in this case.
  */
-int notrace unwind_frame(struct stackframe *frame)
+
+extern unsigned long call_with_stack_end;
+
+static int frame_pointer_check(struct stackframe *frame)
 {
 	unsigned long high, low;
 	unsigned long fp = frame->fp;
+	unsigned long pc = frame->pc;
+
+	/*
+	 * call_with_stack() is the only place we allow SP to jump from one
+	 * stack to another, with FP and SP pointing to different stacks,
+	 * skipping the FP boundary check at this point.
+	 */
+	if (pc >= (unsigned long)&call_with_stack &&
+			pc < (unsigned long)&call_with_stack_end)
+		return 0;
 
 	/* only go to a higher address on the stack */
 	low = frame->sp;
 	high = ALIGN(low, THREAD_SIZE);
 
-#ifdef CONFIG_CC_IS_CLANG
 	/* check current frame pointer is within bounds */
+#ifdef CONFIG_CC_IS_CLANG
 	if (fp < low + 4 || fp > high - 4)
 		return -EINVAL;
-
-	frame->sp = frame->fp;
-	frame->fp = *(unsigned long *)(fp);
-	frame->pc = *(unsigned long *)(fp + 4);
 #else
-	/* check current frame pointer is within bounds */
 	if (fp < low + 12 || fp > high - 4)
 		return -EINVAL;
+#endif
+
+	return 0;
+}
+
+int notrace unwind_frame(struct stackframe *frame)
+{
+	unsigned long fp = frame->fp;
+
+	if (frame_pointer_check(frame))
+		return -EINVAL;
+
+	/*
+	 * When we unwind through an exception stack, include the saved PC
+	 * value into the stack trace.
+	 */
+	if (frame->ex_frame) {
+		struct pt_regs *regs = (struct pt_regs *)frame->sp;
+
+		/*
+		 * We check that 'regs + sizeof(struct pt_regs)' (that is,
+		 * &regs[1]) does not exceed the bottom of the stack to avoid
+		 * accessing data outside the task's stack. This may happen
+		 * when frame->ex_frame is a false positive.
+		 */
+		if ((unsigned long)&regs[1] > ALIGN(frame->sp, THREAD_SIZE))
+			return -EINVAL;
+
+		frame->pc = regs->ARM_pc;
+		frame->ex_frame = false;
+		return 0;
+	}
 
 	/* restore the registers from the stack frame */
-	frame->fp = *(unsigned long *)(fp - 12);
-	frame->sp = *(unsigned long *)(fp - 8);
-	frame->pc = *(unsigned long *)(fp - 4);
+#ifdef CONFIG_CC_IS_CLANG
+	frame->sp = frame->fp;
+	frame->fp = READ_ONCE_NOCHECK(*(unsigned long *)(fp));
+	frame->pc = READ_ONCE_NOCHECK(*(unsigned long *)(fp + 4));
+#else
+	frame->fp = READ_ONCE_NOCHECK(*(unsigned long *)(fp - 12));
+	frame->sp = READ_ONCE_NOCHECK(*(unsigned long *)(fp - 8));
+	frame->pc = READ_ONCE_NOCHECK(*(unsigned long *)(fp - 4));
 #endif
 #ifdef CONFIG_KRETPROBES
 	if (is_kretprobe_trampoline(frame->pc))
@@ -72,6 +119,9 @@ int notrace unwind_frame(struct stackframe *frame)
 					(void *)frame->fp, &frame->kr_cur);
 #endif
 
+	if (in_entry_text(frame->pc))
+		frame->ex_frame = true;
+
 	return 0;
 }
 #endif
@@ -102,7 +152,6 @@ static int save_trace(struct stackframe *frame, void *d)
 {
 	struct stack_trace_data *data = d;
 	struct stack_trace *trace = data->trace;
-	struct pt_regs *regs;
 	unsigned long addr = frame->pc;
 
 	if (data->no_sched_functions && in_sched_functions(addr))
@@ -113,19 +162,6 @@ static int save_trace(struct stackframe *frame, void *d)
 	}
 
 	trace->entries[trace->nr_entries++] = addr;
-
-	if (trace->nr_entries >= trace->max_entries)
-		return 1;
-
-	if (!in_entry_text(frame->pc))
-		return 0;
-
-	regs = (struct pt_regs *)frame->sp;
-	if ((unsigned long)&regs[1] > ALIGN(frame->sp, THREAD_SIZE))
-		return 0;
-
-	trace->entries[trace->nr_entries++] = regs->ARM_pc;
-
 	return trace->nr_entries >= trace->max_entries;
 }
 
@@ -160,12 +196,16 @@ static noinline void __save_stack_trace(struct task_struct *tsk,
 		frame.fp = (unsigned long)__builtin_frame_address(0);
 		frame.sp = current_stack_pointer;
 		frame.lr = (unsigned long)__builtin_return_address(0);
-		frame.pc = (unsigned long)__save_stack_trace;
+here:
+		frame.pc = (unsigned long)&&here;
 	}
 #ifdef CONFIG_KRETPROBES
 	frame.kr_cur = NULL;
 	frame.tsk = tsk;
 #endif
+#ifdef CONFIG_UNWINDER_FRAME_POINTER
+	frame.ex_frame = false;
+#endif
 
 	walk_stackframe(&frame, save_trace, &data);
 }
@@ -187,6 +227,9 @@ void save_stack_trace_regs(struct pt_regs *regs, struct stack_trace *trace)
 	frame.kr_cur = NULL;
 	frame.tsk = current;
 #endif
+#ifdef CONFIG_UNWINDER_FRAME_POINTER
+	frame.ex_frame = in_entry_text(frame.pc);
+#endif
 
 	walk_stackframe(&frame, save_trace, &data);
 }
diff --git a/arch/arm/kernel/swp_emulate.c b/arch/arm/kernel/swp_emulate.c
index 6166ba38bf99..b74bfcf94fb1 100644
--- a/arch/arm/kernel/swp_emulate.c
+++ b/arch/arm/kernel/swp_emulate.c
@@ -195,7 +195,7 @@ static int swp_handler(struct pt_regs *regs, unsigned int instr)
 		 destreg, EXTRACT_REG_NUM(instr, RT2_OFFSET), data);
 
 	/* Check access in reasonable access range for both SWP and SWPB */
-	if (!access_ok((address & ~3), 4)) {
+	if (!access_ok((void __user *)(address & ~3), 4)) {
 		pr_debug("SWP{B} emulation: access to %p not allowed!\n",
 			 (void *)address);
 		res = -EFAULT;
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index da04ed85855a..20b2db6dcd1c 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -30,11 +30,13 @@
 #include <linux/atomic.h>
 #include <asm/cacheflush.h>
 #include <asm/exception.h>
+#include <asm/spectre.h>
 #include <asm/unistd.h>
 #include <asm/traps.h>
 #include <asm/ptrace.h>
 #include <asm/unwind.h>
 #include <asm/tls.h>
+#include <asm/stacktrace.h>
 #include <asm/system_misc.h>
 #include <asm/opcodes.h>
 
@@ -60,13 +62,24 @@ static int __init user_debug_setup(char *str)
 __setup("user_debug=", user_debug_setup);
 #endif
 
-static void dump_mem(const char *, const char *, unsigned long, unsigned long);
-
 void dump_backtrace_entry(unsigned long where, unsigned long from,
 			  unsigned long frame, const char *loglvl)
 {
 	unsigned long end = frame + 4 + sizeof(struct pt_regs);
 
+	if (IS_ENABLED(CONFIG_UNWINDER_FRAME_POINTER) &&
+	    IS_ENABLED(CONFIG_CC_IS_GCC) &&
+	    end > ALIGN(frame, THREAD_SIZE)) {
+		/*
+		 * If we are walking past the end of the stack, it may be due
+		 * to the fact that we are on an IRQ or overflow stack. In this
+		 * case, we can load the address of the other stack from the
+		 * frame record.
+		 */
+		frame = ((unsigned long *)frame)[-2] - 4;
+		end = frame + 4 + sizeof(struct pt_regs);
+	}
+
 #ifndef CONFIG_KALLSYMS
 	printk("%sFunction entered at [<%08lx>] from [<%08lx>]\n",
 		loglvl, where, from);
@@ -110,7 +123,8 @@ void dump_backtrace_stm(u32 *stack, u32 instruction, const char *loglvl)
 static int verify_stack(unsigned long sp)
 {
 	if (sp < PAGE_OFFSET ||
-	    (sp > (unsigned long)high_memory && high_memory != NULL))
+	    (!IS_ENABLED(CONFIG_VMAP_STACK) &&
+	     sp > (unsigned long)high_memory && high_memory != NULL))
 		return -EFAULT;
 
 	return 0;
@@ -120,8 +134,8 @@ static int verify_stack(unsigned long sp)
 /*
  * Dump out the contents of some memory nicely...
  */
-static void dump_mem(const char *lvl, const char *str, unsigned long bottom,
-		     unsigned long top)
+void dump_mem(const char *lvl, const char *str, unsigned long bottom,
+	      unsigned long top)
 {
 	unsigned long first;
 	int i;
@@ -191,14 +205,14 @@ static void dump_instr(const char *lvl, struct pt_regs *regs)
 }
 
 #ifdef CONFIG_ARM_UNWIND
-static inline void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk,
-				  const char *loglvl)
+void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk,
+		    const char *loglvl)
 {
 	unwind_backtrace(regs, tsk, loglvl);
 }
 #else
-static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk,
-			   const char *loglvl)
+void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk,
+		    const char *loglvl)
 {
 	unsigned int fp, mode;
 	int ok = 1;
@@ -280,7 +294,8 @@ static int __die(const char *str, int err, struct pt_regs *regs)
 
 	if (!user_mode(regs) || in_interrupt()) {
 		dump_mem(KERN_EMERG, "Stack: ", regs->ARM_sp,
-			 THREAD_SIZE + (unsigned long)task_stack_page(tsk));
+			 ALIGN(regs->ARM_sp - THREAD_SIZE, THREAD_ALIGN)
+			 + THREAD_SIZE);
 		dump_backtrace(regs, tsk, KERN_EMERG);
 		dump_instr(KERN_EMERG, regs);
 	}
@@ -472,7 +487,7 @@ asmlinkage void do_undefinstr(struct pt_regs *regs)
 die_sig:
 #ifdef CONFIG_DEBUG_USER
 	if (user_debug & UDBG_UNDEFINED) {
-		pr_info("%s (%d): undefined instruction: pc=%p\n",
+		pr_info("%s (%d): undefined instruction: pc=%px\n",
 			current->comm, task_pid_nr(current), pc);
 		__show_regs(regs);
 		dump_instr(KERN_INFO, regs);
@@ -576,7 +591,7 @@ do_cache_op(unsigned long start, unsigned long end, int flags)
 	if (end < start || flags)
 		return -EINVAL;
 
-	if (!access_ok(start, end - start))
+	if (!access_ok((void __user *)start, end - start))
 		return -EFAULT;
 
 	return __do_cache_op(start, end);
@@ -789,10 +804,59 @@ static inline void __init kuser_init(void *vectors)
 }
 #endif
 
+#ifndef CONFIG_CPU_V7M
+static void copy_from_lma(void *vma, void *lma_start, void *lma_end)
+{
+	memcpy(vma, lma_start, lma_end - lma_start);
+}
+
+static void flush_vectors(void *vma, size_t offset, size_t size)
+{
+	unsigned long start = (unsigned long)vma + offset;
+	unsigned long end = start + size;
+
+	flush_icache_range(start, end);
+}
+
+#ifdef CONFIG_HARDEN_BRANCH_HISTORY
+int spectre_bhb_update_vectors(unsigned int method)
+{
+	extern char __vectors_bhb_bpiall_start[], __vectors_bhb_bpiall_end[];
+	extern char __vectors_bhb_loop8_start[], __vectors_bhb_loop8_end[];
+	void *vec_start, *vec_end;
+
+	if (system_state >= SYSTEM_FREEING_INITMEM) {
+		pr_err("CPU%u: Spectre BHB workaround too late - system vulnerable\n",
+		       smp_processor_id());
+		return SPECTRE_VULNERABLE;
+	}
+
+	switch (method) {
+	case SPECTRE_V2_METHOD_LOOP8:
+		vec_start = __vectors_bhb_loop8_start;
+		vec_end = __vectors_bhb_loop8_end;
+		break;
+
+	case SPECTRE_V2_METHOD_BPIALL:
+		vec_start = __vectors_bhb_bpiall_start;
+		vec_end = __vectors_bhb_bpiall_end;
+		break;
+
+	default:
+		pr_err("CPU%u: unknown Spectre BHB state %d\n",
+		       smp_processor_id(), method);
+		return SPECTRE_VULNERABLE;
+	}
+
+	copy_from_lma(vectors_page, vec_start, vec_end);
+	flush_vectors(vectors_page, 0, vec_end - vec_start);
+
+	return SPECTRE_MITIGATED;
+}
+#endif
+
 void __init early_trap_init(void *vectors_base)
 {
-#ifndef CONFIG_CPU_V7M
-	unsigned long vectors = (unsigned long)vectors_base;
 	extern char __stubs_start[], __stubs_end[];
 	extern char __vectors_start[], __vectors_end[];
 	unsigned i;
@@ -813,17 +877,87 @@ void __init early_trap_init(void *vectors_base)
 	 * into the vector page, mapped at 0xffff0000, and ensure these
 	 * are visible to the instruction stream.
 	 */
-	memcpy((void *)vectors, __vectors_start, __vectors_end - __vectors_start);
-	memcpy((void *)vectors + 0x1000, __stubs_start, __stubs_end - __stubs_start);
+	copy_from_lma(vectors_base, __vectors_start, __vectors_end);
+	copy_from_lma(vectors_base + 0x1000, __stubs_start, __stubs_end);
 
 	kuser_init(vectors_base);
 
-	flush_icache_range(vectors, vectors + PAGE_SIZE * 2);
+	flush_vectors(vectors_base, 0, PAGE_SIZE * 2);
+}
 #else /* ifndef CONFIG_CPU_V7M */
+void __init early_trap_init(void *vectors_base)
+{
 	/*
 	 * on V7-M there is no need to copy the vector table to a dedicated
 	 * memory area. The address is configurable and so a table in the kernel
 	 * image can be used.
 	 */
+}
+#endif
+
+#ifdef CONFIG_VMAP_STACK
+
+DECLARE_PER_CPU(u8 *, irq_stack_ptr);
+
+asmlinkage DEFINE_PER_CPU(u8 *, overflow_stack_ptr);
+
+static int __init allocate_overflow_stacks(void)
+{
+	u8 *stack;
+	int cpu;
+
+	for_each_possible_cpu(cpu) {
+		stack = (u8 *)__get_free_page(GFP_KERNEL);
+		if (WARN_ON(!stack))
+			return -ENOMEM;
+		per_cpu(overflow_stack_ptr, cpu) = &stack[OVERFLOW_STACK_SIZE];
+	}
+	return 0;
+}
+early_initcall(allocate_overflow_stacks);
+
+asmlinkage void handle_bad_stack(struct pt_regs *regs)
+{
+	unsigned long tsk_stk = (unsigned long)current->stack;
+#ifdef CONFIG_IRQSTACKS
+	unsigned long irq_stk = (unsigned long)raw_cpu_read(irq_stack_ptr);
 #endif
+	unsigned long ovf_stk = (unsigned long)raw_cpu_read(overflow_stack_ptr);
+
+	console_verbose();
+	pr_emerg("Insufficient stack space to handle exception!");
+
+	pr_emerg("Task stack:     [0x%08lx..0x%08lx]\n",
+		 tsk_stk, tsk_stk + THREAD_SIZE);
+#ifdef CONFIG_IRQSTACKS
+	pr_emerg("IRQ stack:      [0x%08lx..0x%08lx]\n",
+		 irq_stk - THREAD_SIZE, irq_stk);
+#endif
+	pr_emerg("Overflow stack: [0x%08lx..0x%08lx]\n",
+		 ovf_stk - OVERFLOW_STACK_SIZE, ovf_stk);
+
+	die("kernel stack overflow", regs, 0);
+}
+
+#ifndef CONFIG_ARM_LPAE
+/*
+ * Normally, we rely on the logic in do_translation_fault() to update stale PMD
+ * entries covering the vmalloc space in a task's page tables when it first
+ * accesses the region in question. Unfortunately, this is not sufficient when
+ * the task stack resides in the vmalloc region, as do_translation_fault() is a
+ * C function that needs a stack to run.
+ *
+ * So we need to ensure that these PMD entries are up to date *before* the MM
+ * switch. As we already have some logic in the MM switch path that takes care
+ * of this, let's trigger it by bumping the counter every time the core vmalloc
+ * code modifies a PMD entry in the vmalloc region. Use release semantics on
+ * the store so that other CPUs observing the counter's new value are
+ * guaranteed to see the updated page table entries as well.
+ */
+void arch_sync_kernel_mappings(unsigned long start, unsigned long end)
+{
+	if (start < VMALLOC_END && end > VMALLOC_START)
+		atomic_inc_return_release(&init_mm.context.vmalloc_seq);
 }
+#endif
+#endif
diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c
index 59fdf257bf8b..a37ea6c772cd 100644
--- a/arch/arm/kernel/unwind.c
+++ b/arch/arm/kernel/unwind.c
@@ -33,6 +33,8 @@
 #include <asm/traps.h>
 #include <asm/unwind.h>
 
+#include "reboot.h"
+
 /* Dummy functions to avoid linker complaints */
 void __aeabi_unwind_cpp_pr0(void)
 {
@@ -53,6 +55,7 @@ struct unwind_ctrl_block {
 	unsigned long vrs[16];		/* virtual register set */
 	const unsigned long *insn;	/* pointer to the current instructions word */
 	unsigned long sp_high;		/* highest value of sp allowed */
+	unsigned long *lr_addr;		/* address of LR value on the stack */
 	/*
 	 * 1 : check for stack overflow for each register pop.
 	 * 0 : save overhead if there is plenty of stack remaining.
@@ -237,6 +240,8 @@ static int unwind_pop_register(struct unwind_ctrl_block *ctrl,
 	 * from being tracked by KASAN.
 	 */
 	ctrl->vrs[reg] = READ_ONCE_NOCHECK(*(*vsp));
+	if (reg == 14)
+		ctrl->lr_addr = *vsp;
 	(*vsp)++;
 	return URC_OK;
 }
@@ -256,8 +261,9 @@ static int unwind_exec_pop_subset_r4_to_r13(struct unwind_ctrl_block *ctrl,
 		mask >>= 1;
 		reg++;
 	}
-	if (!load_sp)
+	if (!load_sp) {
 		ctrl->vrs[SP] = (unsigned long)vsp;
+	}
 
 	return URC_OK;
 }
@@ -313,9 +319,9 @@ static int unwind_exec_insn(struct unwind_ctrl_block *ctrl)
 
 	if ((insn & 0xc0) == 0x00)
 		ctrl->vrs[SP] += ((insn & 0x3f) << 2) + 4;
-	else if ((insn & 0xc0) == 0x40)
+	else if ((insn & 0xc0) == 0x40) {
 		ctrl->vrs[SP] -= ((insn & 0x3f) << 2) + 4;
-	else if ((insn & 0xf0) == 0x80) {
+	} else if ((insn & 0xf0) == 0x80) {
 		unsigned long mask;
 
 		insn = (insn << 8) | unwind_get_byte(ctrl);
@@ -330,9 +336,9 @@ static int unwind_exec_insn(struct unwind_ctrl_block *ctrl)
 		if (ret)
 			goto error;
 	} else if ((insn & 0xf0) == 0x90 &&
-		   (insn & 0x0d) != 0x0d)
+		   (insn & 0x0d) != 0x0d) {
 		ctrl->vrs[SP] = ctrl->vrs[insn & 0x0f];
-	else if ((insn & 0xf0) == 0xa0) {
+	} else if ((insn & 0xf0) == 0xa0) {
 		ret = unwind_exec_pop_r4_to_rN(ctrl, insn);
 		if (ret)
 			goto error;
@@ -375,23 +381,22 @@ error:
  */
 int unwind_frame(struct stackframe *frame)
 {
-	unsigned long low;
 	const struct unwind_idx *idx;
 	struct unwind_ctrl_block ctrl;
+	unsigned long sp_low;
 
 	/* store the highest address on the stack to avoid crossing it*/
-	low = frame->sp;
-	ctrl.sp_high = ALIGN(low, THREAD_SIZE);
+	sp_low = frame->sp;
+	ctrl.sp_high = ALIGN(sp_low - THREAD_SIZE, THREAD_ALIGN)
+		       + THREAD_SIZE;
 
 	pr_debug("%s(pc = %08lx lr = %08lx sp = %08lx)\n", __func__,
 		 frame->pc, frame->lr, frame->sp);
 
-	if (!kernel_text_address(frame->pc))
-		return -URC_FAILURE;
-
 	idx = unwind_find_idx(frame->pc);
 	if (!idx) {
-		pr_warn("unwind: Index not found %08lx\n", frame->pc);
+		if (frame->pc && kernel_text_address(frame->pc))
+			pr_warn("unwind: Index not found %08lx\n", frame->pc);
 		return -URC_FAILURE;
 	}
 
@@ -403,7 +408,20 @@ int unwind_frame(struct stackframe *frame)
 	if (idx->insn == 1)
 		/* can't unwind */
 		return -URC_FAILURE;
-	else if ((idx->insn & 0x80000000) == 0)
+	else if (frame->pc == prel31_to_addr(&idx->addr_offset)) {
+		/*
+		 * Unwinding is tricky when we're halfway through the prologue,
+		 * since the stack frame that the unwinder expects may not be
+		 * fully set up yet. However, one thing we do know for sure is
+		 * that if we are unwinding from the very first instruction of
+		 * a function, we are still effectively in the stack frame of
+		 * the caller, and the unwind info has no relevance yet.
+		 */
+		if (frame->pc == frame->lr)
+			return -URC_FAILURE;
+		frame->pc = frame->lr;
+		return URC_OK;
+	} else if ((idx->insn & 0x80000000) == 0)
 		/* prel31 to the unwind table */
 		ctrl.insn = (unsigned long *)prel31_to_addr(&idx->insn);
 	else if ((idx->insn & 0xff000000) == 0x80000000)
@@ -430,6 +448,16 @@ int unwind_frame(struct stackframe *frame)
 
 	ctrl.check_each_pop = 0;
 
+	if (prel31_to_addr(&idx->addr_offset) == (u32)&call_with_stack) {
+		/*
+		 * call_with_stack() is the only place where we permit SP to
+		 * jump from one stack to another, and since we know it is
+		 * guaranteed to happen, set up the SP bounds accordingly.
+		 */
+		sp_low = frame->fp;
+		ctrl.sp_high = ALIGN(frame->fp, THREAD_SIZE);
+	}
+
 	while (ctrl.entries > 0) {
 		int urc;
 		if ((ctrl.sp_high - ctrl.vrs[SP]) < sizeof(ctrl.vrs))
@@ -437,7 +465,7 @@ int unwind_frame(struct stackframe *frame)
 		urc = unwind_exec_insn(&ctrl);
 		if (urc < 0)
 			return urc;
-		if (ctrl.vrs[SP] < low || ctrl.vrs[SP] >= ctrl.sp_high)
+		if (ctrl.vrs[SP] < sp_low || ctrl.vrs[SP] > ctrl.sp_high)
 			return -URC_FAILURE;
 	}
 
@@ -452,6 +480,7 @@ int unwind_frame(struct stackframe *frame)
 	frame->sp = ctrl.vrs[SP];
 	frame->lr = ctrl.vrs[LR];
 	frame->pc = ctrl.vrs[PC];
+	frame->lr_addr = ctrl.lr_addr;
 
 	return URC_OK;
 }
@@ -475,7 +504,12 @@ void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk,
 		frame.fp = (unsigned long)__builtin_frame_address(0);
 		frame.sp = current_stack_pointer;
 		frame.lr = (unsigned long)__builtin_return_address(0);
-		frame.pc = (unsigned long)unwind_backtrace;
+		/* We are saving the stack and execution state at this
+		 * point, so we should ensure that frame.pc is within
+		 * this block of code.
+		 */
+here:
+		frame.pc = (unsigned long)&&here;
 	} else {
 		/* task blocked in __switch_to */
 		frame.fp = thread_saved_fp(tsk);
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index f02d617e3359..aa12b65a7fd6 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -138,12 +138,12 @@ SECTIONS
 #ifdef CONFIG_STRICT_KERNEL_RWX
 	. = ALIGN(1<<SECTION_SHIFT);
 #else
-	. = ALIGN(THREAD_SIZE);
+	. = ALIGN(THREAD_ALIGN);
 #endif
 	__init_end = .;
 
 	_sdata = .;
-	RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
+	RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_ALIGN)
 	_edata = .;
 
 	BSS_SECTION(0, 0, 0)
diff --git a/arch/arm/lib/backtrace-clang.S b/arch/arm/lib/backtrace-clang.S
index 5b2cdb1003e3..290c52a60fc6 100644
--- a/arch/arm/lib/backtrace-clang.S
+++ b/arch/arm/lib/backtrace-clang.S
@@ -144,7 +144,7 @@ for_each_frame:	tst	frame, mask		@ Check for address exceptions
  */
 1003:		ldr	sv_lr, [sv_fp, #4]	@ get saved lr from next frame
 
-		ldr	r0, [sv_lr, #-4]	@ get call instruction
+1004:		ldr	r0, [sv_lr, #-4]	@ get call instruction
 		ldr	r3, .Lopcode+4
 		and	r2, r3, r0		@ is this a bl call
 		teq	r2, r3
@@ -164,7 +164,7 @@ finished_setup:
 /*
  * Print the function (sv_pc) and where it was called from (sv_lr).
  */
-1004:		mov	r0, sv_pc
+		mov	r0, sv_pc
 
 		mov	r1, sv_lr
 		mov	r2, frame
@@ -197,6 +197,14 @@ finished_setup:
 
 		cmp	sv_fp, frame		@ next frame must be
 		mov	frame, sv_fp		@ above the current frame
+#ifdef CONFIG_IRQSTACKS
+		@
+		@ Kernel stacks may be discontiguous in memory. If the next
+		@ frame is below the previous frame, accept it as long as it
+		@ lives in kernel memory.
+		@
+		cmpls	sv_fp, #PAGE_OFFSET
+#endif
 		bhi	for_each_frame
 
 1006:		adr	r0, .Lbad
@@ -210,7 +218,7 @@ ENDPROC(c_backtrace)
 		.long	1001b, 1006b
 		.long	1002b, 1006b
 		.long	1003b, 1006b
-		.long	1004b, 1006b
+		.long	1004b, finished_setup
 		.long   1005b, 1006b
 		.popsection
 
diff --git a/arch/arm/lib/backtrace.S b/arch/arm/lib/backtrace.S
index e8408f22d4dc..293a2716bd20 100644
--- a/arch/arm/lib/backtrace.S
+++ b/arch/arm/lib/backtrace.S
@@ -98,6 +98,14 @@ for_each_frame:	tst	frame, mask		@ Check for address exceptions
 
 		cmp	sv_fp, frame		@ next frame must be
 		mov	frame, sv_fp		@ above the current frame
+#ifdef CONFIG_IRQSTACKS
+		@
+		@ Kernel stacks may be discontiguous in memory. If the next
+		@ frame is below the previous frame, accept it as long as it
+		@ lives in kernel memory.
+		@
+		cmpls	sv_fp, #PAGE_OFFSET
+#endif
 		bhi	for_each_frame
 
 1006:		adr	r0, .Lbad
diff --git a/arch/arm/lib/call_with_stack.S b/arch/arm/lib/call_with_stack.S
index 28b0341ae786..5030d4e8d126 100644
--- a/arch/arm/lib/call_with_stack.S
+++ b/arch/arm/lib/call_with_stack.S
@@ -8,25 +8,44 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
+#include <asm/unwind.h>
 
 /*
  * void call_with_stack(void (*fn)(void *), void *arg, void *sp)
  *
  * Change the stack to that pointed at by sp, then invoke fn(arg) with
  * the new stack.
+ *
+ * The sequence below follows the APCS frame convention for frame pointer
+ * unwinding, and implements the unwinder annotations needed by the EABI
+ * unwinder.
  */
-ENTRY(call_with_stack)
-	str	sp, [r2, #-4]!
-	str	lr, [r2, #-4]!
 
+ENTRY(call_with_stack)
+#if defined(CONFIG_UNWINDER_FRAME_POINTER) && defined(CONFIG_CC_IS_GCC)
+	mov	ip, sp
+	push	{fp, ip, lr, pc}
+	sub	fp, ip, #4
+#else
+UNWIND( .fnstart		)
+UNWIND( .save	{fpreg, lr}	)
+	push	{fpreg, lr}
+UNWIND( .setfp	fpreg, sp	)
+	mov	fpreg, sp
+#endif
 	mov	sp, r2
 	mov	r2, r0
 	mov	r0, r1
 
-	badr	lr, 1f
-	ret	r2
+	bl_r	r2
 
-1:	ldr	lr, [sp]
-	ldr	sp, [sp, #4]
-	ret	lr
+#if defined(CONFIG_UNWINDER_FRAME_POINTER) && defined(CONFIG_CC_IS_GCC)
+	ldmdb	fp, {fp, sp, pc}
+#else
+	mov	sp, fpreg
+	pop	{fpreg, pc}
+UNWIND( .fnend			)
+#endif
+	.globl call_with_stack_end
+call_with_stack_end:
 ENDPROC(call_with_stack)
diff --git a/arch/arm/lib/copy_from_user.S b/arch/arm/lib/copy_from_user.S
index 480a20766137..270de7debd0f 100644
--- a/arch/arm/lib/copy_from_user.S
+++ b/arch/arm/lib/copy_from_user.S
@@ -91,18 +91,15 @@
 	strb\cond \reg, [\ptr], #1
 	.endm
 
-	.macro enter reg1 reg2
+	.macro enter regs:vararg
 	mov	r3, #0
-	stmdb	sp!, {r0, r2, r3, \reg1, \reg2}
+UNWIND( .save	{r0, r2, r3, \regs}		)
+	stmdb	sp!, {r0, r2, r3, \regs}
 	.endm
 
-	.macro usave reg1 reg2
-	UNWIND(	.save {r0, r2, r3, \reg1, \reg2}	)
-	.endm
-
-	.macro exit reg1 reg2
+	.macro exit regs:vararg
 	add	sp, sp, #8
-	ldmfd	sp!, {r0, \reg1, \reg2}
+	ldmfd	sp!, {r0, \regs}
 	.endm
 
 	.text
diff --git a/arch/arm/lib/copy_template.S b/arch/arm/lib/copy_template.S
index 810a805d36dc..8fbafb074fe9 100644
--- a/arch/arm/lib/copy_template.S
+++ b/arch/arm/lib/copy_template.S
@@ -69,13 +69,10 @@
  *	than one 32bit instruction in Thumb-2)
  */
 
-
-	UNWIND(	.fnstart			)
-		enter	r4, lr
-	UNWIND(	.fnend				)
-
 	UNWIND(	.fnstart			)
-		usave	r4, lr			  @ in first stmdb block
+		enter	r4, UNWIND(fpreg,) lr
+	UNWIND(	.setfp	fpreg, sp		)
+	UNWIND(	mov	fpreg, sp		)
 
 		subs	r2, r2, #4
 		blt	8f
@@ -86,12 +83,7 @@
 		bne	10f
 
 1:		subs	r2, r2, #(28)
-		stmfd	sp!, {r5 - r8}
-	UNWIND(	.fnend				)
-
-	UNWIND(	.fnstart			)
-		usave	r4, lr
-	UNWIND(	.save	{r5 - r8}		) @ in second stmfd block
+		stmfd	sp!, {r5, r6, r8, r9}
 		blt	5f
 
 	CALGN(	ands	ip, r0, #31		)
@@ -110,9 +102,9 @@
 	PLD(	pld	[r1, #92]		)
 
 3:	PLD(	pld	[r1, #124]		)
-4:		ldr8w	r1, r3, r4, r5, r6, r7, r8, ip, lr, abort=20f
+4:		ldr8w	r1, r3, r4, r5, r6, r8, r9, ip, lr, abort=20f
 		subs	r2, r2, #32
-		str8w	r0, r3, r4, r5, r6, r7, r8, ip, lr, abort=20f
+		str8w	r0, r3, r4, r5, r6, r8, r9, ip, lr, abort=20f
 		bge	3b
 	PLD(	cmn	r2, #96			)
 	PLD(	bge	4b			)
@@ -132,8 +124,8 @@
 		ldr1w	r1, r4, abort=20f
 		ldr1w	r1, r5, abort=20f
 		ldr1w	r1, r6, abort=20f
-		ldr1w	r1, r7, abort=20f
 		ldr1w	r1, r8, abort=20f
+		ldr1w	r1, r9, abort=20f
 		ldr1w	r1, lr, abort=20f
 
 #if LDR1W_SHIFT < STR1W_SHIFT
@@ -150,17 +142,14 @@
 		str1w	r0, r4, abort=20f
 		str1w	r0, r5, abort=20f
 		str1w	r0, r6, abort=20f
-		str1w	r0, r7, abort=20f
 		str1w	r0, r8, abort=20f
+		str1w	r0, r9, abort=20f
 		str1w	r0, lr, abort=20f
 
 	CALGN(	bcs	2b			)
 
-7:		ldmfd	sp!, {r5 - r8}
-	UNWIND(	.fnend				) @ end of second stmfd block
+7:		ldmfd	sp!, {r5, r6, r8, r9}
 
-	UNWIND(	.fnstart			)
-		usave	r4, lr			  @ still in first stmdb block
 8:		movs	r2, r2, lsl #31
 		ldr1b	r1, r3, ne, abort=21f
 		ldr1b	r1, r4, cs, abort=21f
@@ -169,7 +158,7 @@
 		str1b	r0, r4, cs, abort=21f
 		str1b	r0, ip, cs, abort=21f
 
-		exit	r4, pc
+		exit	r4, UNWIND(fpreg,) pc
 
 9:		rsb	ip, ip, #4
 		cmp	ip, #2
@@ -189,13 +178,10 @@
 		ldr1w	r1, lr, abort=21f
 		beq	17f
 		bgt	18f
-	UNWIND(	.fnend				)
 
 
 		.macro	forward_copy_shift pull push
 
-	UNWIND(	.fnstart			)
-		usave	r4, lr			  @ still in first stmdb block
 		subs	r2, r2, #28
 		blt	14f
 
@@ -205,12 +191,8 @@
 	CALGN(	subcc	r2, r2, ip		)
 	CALGN(	bcc	15f			)
 
-11:		stmfd	sp!, {r5 - r9}
-	UNWIND(	.fnend				)
+11:		stmfd	sp!, {r5, r6, r8 - r10}
 
-	UNWIND(	.fnstart			)
-		usave	r4, lr
-	UNWIND(	.save	{r5 - r9}		) @ in new second stmfd block
 	PLD(	pld	[r1, #0]		)
 	PLD(	subs	r2, r2, #96		)
 	PLD(	pld	[r1, #28]		)
@@ -219,35 +201,32 @@
 	PLD(	pld	[r1, #92]		)
 
 12:	PLD(	pld	[r1, #124]		)
-13:		ldr4w	r1, r4, r5, r6, r7, abort=19f
+13:		ldr4w	r1, r4, r5, r6, r8, abort=19f
 		mov	r3, lr, lspull #\pull
 		subs	r2, r2, #32
-		ldr4w	r1, r8, r9, ip, lr, abort=19f
+		ldr4w	r1, r9, r10, ip, lr, abort=19f
 		orr	r3, r3, r4, lspush #\push
 		mov	r4, r4, lspull #\pull
 		orr	r4, r4, r5, lspush #\push
 		mov	r5, r5, lspull #\pull
 		orr	r5, r5, r6, lspush #\push
 		mov	r6, r6, lspull #\pull
-		orr	r6, r6, r7, lspush #\push
-		mov	r7, r7, lspull #\pull
-		orr	r7, r7, r8, lspush #\push
+		orr	r6, r6, r8, lspush #\push
 		mov	r8, r8, lspull #\pull
 		orr	r8, r8, r9, lspush #\push
 		mov	r9, r9, lspull #\pull
-		orr	r9, r9, ip, lspush #\push
+		orr	r9, r9, r10, lspush #\push
+		mov	r10, r10, lspull #\pull
+		orr	r10, r10, ip, lspush #\push
 		mov	ip, ip, lspull #\pull
 		orr	ip, ip, lr, lspush #\push
-		str8w	r0, r3, r4, r5, r6, r7, r8, r9, ip, abort=19f
+		str8w	r0, r3, r4, r5, r6, r8, r9, r10, ip, abort=19f
 		bge	12b
 	PLD(	cmn	r2, #96			)
 	PLD(	bge	13b			)
 
-		ldmfd	sp!, {r5 - r9}
-	UNWIND(	.fnend				) @ end of the second stmfd block
+		ldmfd	sp!, {r5, r6, r8 - r10}
 
-	UNWIND(	.fnstart			)
-		usave	r4, lr			  @ still in first stmdb block
 14:		ands	ip, r2, #28
 		beq	16f
 
@@ -262,7 +241,6 @@
 
 16:		sub	r1, r1, #(\push / 8)
 		b	8b
-	UNWIND(	.fnend				)
 
 		.endm
 
@@ -273,6 +251,7 @@
 
 18:		forward_copy_shift	pull=24	push=8
 
+	UNWIND(	.fnend				)
 
 /*
  * Abort preamble and completion macros.
@@ -282,13 +261,13 @@
  */
 
 	.macro	copy_abort_preamble
-19:	ldmfd	sp!, {r5 - r9}
+19:	ldmfd	sp!, {r5, r6, r8 - r10}
 	b	21f
-20:	ldmfd	sp!, {r5 - r8}
+20:	ldmfd	sp!, {r5, r6, r8, r9}
 21:
 	.endm
 
 	.macro	copy_abort_end
-	ldmfd	sp!, {r4, pc}
+	ldmfd	sp!, {r4, UNWIND(fpreg,) pc}
 	.endm
 
diff --git a/arch/arm/lib/copy_to_user.S b/arch/arm/lib/copy_to_user.S
index 842ea5ede485..fac49e57cc0b 100644
--- a/arch/arm/lib/copy_to_user.S
+++ b/arch/arm/lib/copy_to_user.S
@@ -90,18 +90,15 @@
 	strusr	\reg, \ptr, 1, \cond, abort=\abort
 	.endm
 
-	.macro enter reg1 reg2
+	.macro enter regs:vararg
 	mov	r3, #0
-	stmdb	sp!, {r0, r2, r3, \reg1, \reg2}
+UNWIND( .save	{r0, r2, r3, \regs}		)
+	stmdb	sp!, {r0, r2, r3, \regs}
 	.endm
 
-	.macro usave reg1 reg2
-	UNWIND(	.save {r0, r2, r3, \reg1, \reg2}	)
-	.endm
-
-	.macro exit reg1 reg2
+	.macro exit regs:vararg
 	add	sp, sp, #8
-	ldmfd	sp!, {r0, \reg1, \reg2}
+	ldmfd	sp!, {r0, \regs}
 	.endm
 
 	.text
diff --git a/arch/arm/lib/findbit.S b/arch/arm/lib/findbit.S
index b5e8b9ae4c7d..7fd3600db8ef 100644
--- a/arch/arm/lib/findbit.S
+++ b/arch/arm/lib/findbit.S
@@ -40,8 +40,8 @@ ENDPROC(_find_first_zero_bit_le)
  * Prototype: int find_next_zero_bit(void *addr, unsigned int maxbit, int offset)
  */
 ENTRY(_find_next_zero_bit_le)
-		teq	r1, #0
-		beq	3b
+		cmp	r2, r1
+		bhs	3b
 		ands	ip, r2, #7
 		beq	1b			@ If new byte, goto old routine
  ARM(		ldrb	r3, [r0, r2, lsr #3]	)
@@ -81,8 +81,8 @@ ENDPROC(_find_first_bit_le)
  * Prototype: int find_next_zero_bit(void *addr, unsigned int maxbit, int offset)
  */
 ENTRY(_find_next_bit_le)
-		teq	r1, #0
-		beq	3b
+		cmp	r2, r1
+		bhs	3b
 		ands	ip, r2, #7
 		beq	1b			@ If new byte, goto old routine
  ARM(		ldrb	r3, [r0, r2, lsr #3]	)
@@ -115,8 +115,8 @@ ENTRY(_find_first_zero_bit_be)
 ENDPROC(_find_first_zero_bit_be)
 
 ENTRY(_find_next_zero_bit_be)
-		teq	r1, #0
-		beq	3b
+		cmp	r2, r1
+		bhs	3b
 		ands	ip, r2, #7
 		beq	1b			@ If new byte, goto old routine
 		eor	r3, r2, #0x18		@ big endian byte ordering
@@ -149,8 +149,8 @@ ENTRY(_find_first_bit_be)
 ENDPROC(_find_first_bit_be)
 
 ENTRY(_find_next_bit_be)
-		teq	r1, #0
-		beq	3b
+		cmp	r2, r1
+		bhs	3b
 		ands	ip, r2, #7
 		beq	1b			@ If new byte, goto old routine
 		eor	r3, r2, #0x18		@ big endian byte ordering
diff --git a/arch/arm/lib/memcpy.S b/arch/arm/lib/memcpy.S
index e4caf48c089f..90f2b645aa0d 100644
--- a/arch/arm/lib/memcpy.S
+++ b/arch/arm/lib/memcpy.S
@@ -42,16 +42,13 @@
 	strb\cond \reg, [\ptr], #1
 	.endm
 
-	.macro enter reg1 reg2
-	stmdb sp!, {r0, \reg1, \reg2}
+	.macro enter regs:vararg
+UNWIND( .save	{r0, \regs}		)
+	stmdb sp!, {r0, \regs}
 	.endm
 
-	.macro usave reg1 reg2
-	UNWIND(	.save	{r0, \reg1, \reg2}	)
-	.endm
-
-	.macro exit reg1 reg2
-	ldmfd sp!, {r0, \reg1, \reg2}
+	.macro exit regs:vararg
+	ldmfd sp!, {r0, \regs}
 	.endm
 
 	.text
diff --git a/arch/arm/lib/memmove.S b/arch/arm/lib/memmove.S
index 6fecc12a1f51..6410554039fd 100644
--- a/arch/arm/lib/memmove.S
+++ b/arch/arm/lib/memmove.S
@@ -31,12 +31,13 @@ WEAK(memmove)
 		subs	ip, r0, r1
 		cmphi	r2, ip
 		bls	__memcpy
-
-		stmfd	sp!, {r0, r4, lr}
 	UNWIND(	.fnend				)
 
 	UNWIND(	.fnstart			)
-	UNWIND(	.save	{r0, r4, lr}		) @ in first stmfd block
+	UNWIND(	.save	{r0, r4, fpreg, lr}	)
+		stmfd	sp!, {r0, r4, UNWIND(fpreg,) lr}
+	UNWIND(	.setfp	fpreg, sp		)
+	UNWIND(	mov	fpreg, sp		)
 		add	r1, r1, r2
 		add	r0, r0, r2
 		subs	r2, r2, #4
@@ -48,12 +49,7 @@ WEAK(memmove)
 		bne	10f
 
 1:		subs	r2, r2, #(28)
-		stmfd	sp!, {r5 - r8}
-	UNWIND(	.fnend				)
-
-	UNWIND(	.fnstart			)
-	UNWIND(	.save	{r0, r4, lr}		)
-	UNWIND(	.save	{r5 - r8}		) @ in second stmfd block
+		stmfd	sp!, {r5, r6, r8, r9}
 		blt	5f
 
 	CALGN(	ands	ip, r0, #31		)
@@ -72,9 +68,9 @@ WEAK(memmove)
 	PLD(	pld	[r1, #-96]		)
 
 3:	PLD(	pld	[r1, #-128]		)
-4:		ldmdb	r1!, {r3, r4, r5, r6, r7, r8, ip, lr}
+4:		ldmdb	r1!, {r3, r4, r5, r6, r8, r9, ip, lr}
 		subs	r2, r2, #32
-		stmdb	r0!, {r3, r4, r5, r6, r7, r8, ip, lr}
+		stmdb	r0!, {r3, r4, r5, r6, r8, r9, ip, lr}
 		bge	3b
 	PLD(	cmn	r2, #96			)
 	PLD(	bge	4b			)
@@ -88,8 +84,8 @@ WEAK(memmove)
 		W(ldr)	r4, [r1, #-4]!
 		W(ldr)	r5, [r1, #-4]!
 		W(ldr)	r6, [r1, #-4]!
-		W(ldr)	r7, [r1, #-4]!
 		W(ldr)	r8, [r1, #-4]!
+		W(ldr)	r9, [r1, #-4]!
 		W(ldr)	lr, [r1, #-4]!
 
 		add	pc, pc, ip
@@ -99,17 +95,13 @@ WEAK(memmove)
 		W(str)	r4, [r0, #-4]!
 		W(str)	r5, [r0, #-4]!
 		W(str)	r6, [r0, #-4]!
-		W(str)	r7, [r0, #-4]!
 		W(str)	r8, [r0, #-4]!
+		W(str)	r9, [r0, #-4]!
 		W(str)	lr, [r0, #-4]!
 
 	CALGN(	bcs	2b			)
 
-7:		ldmfd	sp!, {r5 - r8}
-	UNWIND(	.fnend				) @ end of second stmfd block
-
-	UNWIND(	.fnstart			)
-	UNWIND(	.save	{r0, r4, lr}		) @ still in first stmfd block
+7:		ldmfd	sp!, {r5, r6, r8, r9}
 
 8:		movs	r2, r2, lsl #31
 		ldrbne	r3, [r1, #-1]!
@@ -118,7 +110,7 @@ WEAK(memmove)
 		strbne	r3, [r0, #-1]!
 		strbcs	r4, [r0, #-1]!
 		strbcs	ip, [r0, #-1]
-		ldmfd	sp!, {r0, r4, pc}
+		ldmfd	sp!, {r0, r4, UNWIND(fpreg,) pc}
 
 9:		cmp	ip, #2
 		ldrbgt	r3, [r1, #-1]!
@@ -137,13 +129,10 @@ WEAK(memmove)
 		ldr	r3, [r1, #0]
 		beq	17f
 		blt	18f
-	UNWIND(	.fnend				)
 
 
 		.macro	backward_copy_shift push pull
 
-	UNWIND(	.fnstart			)
-	UNWIND(	.save	{r0, r4, lr}		) @ still in first stmfd block
 		subs	r2, r2, #28
 		blt	14f
 
@@ -152,12 +141,7 @@ WEAK(memmove)
 	CALGN(	subcc	r2, r2, ip		)
 	CALGN(	bcc	15f			)
 
-11:		stmfd	sp!, {r5 - r9}
-	UNWIND(	.fnend				)
-
-	UNWIND(	.fnstart			)
-	UNWIND(	.save	{r0, r4, lr}		)
-	UNWIND(	.save	{r5 - r9}		) @ in new second stmfd block
+11:		stmfd	sp!, {r5, r6, r8 - r10}
 
 	PLD(	pld	[r1, #-4]		)
 	PLD(	subs	r2, r2, #96		)
@@ -167,35 +151,31 @@ WEAK(memmove)
 	PLD(	pld	[r1, #-96]		)
 
 12:	PLD(	pld	[r1, #-128]		)
-13:		ldmdb   r1!, {r7, r8, r9, ip}
+13:		ldmdb   r1!, {r8, r9, r10, ip}
 		mov     lr, r3, lspush #\push
 		subs    r2, r2, #32
 		ldmdb   r1!, {r3, r4, r5, r6}
 		orr     lr, lr, ip, lspull #\pull
 		mov     ip, ip, lspush #\push
-		orr     ip, ip, r9, lspull #\pull
+		orr     ip, ip, r10, lspull #\pull
+		mov     r10, r10, lspush #\push
+		orr     r10, r10, r9, lspull #\pull
 		mov     r9, r9, lspush #\push
 		orr     r9, r9, r8, lspull #\pull
 		mov     r8, r8, lspush #\push
-		orr     r8, r8, r7, lspull #\pull
-		mov     r7, r7, lspush #\push
-		orr     r7, r7, r6, lspull #\pull
+		orr     r8, r8, r6, lspull #\pull
 		mov     r6, r6, lspush #\push
 		orr     r6, r6, r5, lspull #\pull
 		mov     r5, r5, lspush #\push
 		orr     r5, r5, r4, lspull #\pull
 		mov     r4, r4, lspush #\push
 		orr     r4, r4, r3, lspull #\pull
-		stmdb   r0!, {r4 - r9, ip, lr}
+		stmdb   r0!, {r4 - r6, r8 - r10, ip, lr}
 		bge	12b
 	PLD(	cmn	r2, #96			)
 	PLD(	bge	13b			)
 
-		ldmfd	sp!, {r5 - r9}
-	UNWIND(	.fnend				) @ end of the second stmfd block
-
-	UNWIND(	.fnstart			)
-	UNWIND(	.save {r0, r4, lr}		) @ still in first stmfd block
+		ldmfd	sp!, {r5, r6, r8 - r10}
 
 14:		ands	ip, r2, #28
 		beq	16f
@@ -211,7 +191,6 @@ WEAK(memmove)
 
 16:		add	r1, r1, #(\pull / 8)
 		b	8b
-	UNWIND(	.fnend				)
 
 		.endm
 
@@ -222,5 +201,6 @@ WEAK(memmove)
 
 18:		backward_copy_shift	push=24	pull=8
 
+	UNWIND(	.fnend				)
 ENDPROC(memmove)
 ENDPROC(__memmove)
diff --git a/arch/arm/lib/memset.S b/arch/arm/lib/memset.S
index 9817cb258c1a..d71ab61430b2 100644
--- a/arch/arm/lib/memset.S
+++ b/arch/arm/lib/memset.S
@@ -28,16 +28,16 @@ UNWIND( .fnstart         )
 	mov	r3, r1
 7:	cmp	r2, #16
 	blt	4f
+UNWIND( .fnend              )
 
 #if ! CALGN(1)+0
 
 /*
  * We need 2 extra registers for this loop - use r8 and the LR
  */
-	stmfd	sp!, {r8, lr}
-UNWIND( .fnend              )
 UNWIND( .fnstart            )
 UNWIND( .save {r8, lr}      )
+	stmfd	sp!, {r8, lr}
 	mov	r8, r1
 	mov	lr, r3
 
@@ -66,10 +66,9 @@ UNWIND( .fnend              )
  * whole cache lines at once.
  */
 
-	stmfd	sp!, {r4-r8, lr}
-UNWIND( .fnend                 )
 UNWIND( .fnstart               )
 UNWIND( .save {r4-r8, lr}      )
+	stmfd	sp!, {r4-r8, lr}
 	mov	r4, r1
 	mov	r5, r3
 	mov	r6, r1
diff --git a/arch/arm/lib/uaccess_with_memcpy.c b/arch/arm/lib/uaccess_with_memcpy.c
index 106f83a5ea6d..14eecaaf295f 100644
--- a/arch/arm/lib/uaccess_with_memcpy.c
+++ b/arch/arm/lib/uaccess_with_memcpy.c
@@ -92,11 +92,6 @@ __copy_to_user_memcpy(void __user *to, const void *from, unsigned long n)
 	unsigned long ua_flags;
 	int atomic;
 
-	if (uaccess_kernel()) {
-		memcpy((void *)to, from, n);
-		return 0;
-	}
-
 	/* the mmap semaphore is taken only if not in an atomic context */
 	atomic = faulthandler_disabled();
 
@@ -165,11 +160,6 @@ __clear_user_memset(void __user *addr, unsigned long n)
 {
 	unsigned long ua_flags;
 
-	if (uaccess_kernel()) {
-		memset((void *)addr, 0, n);
-		return 0;
-	}
-
 	mmap_read_lock(current->mm);
 	while (n) {
 		pte_t *pte;
@@ -247,7 +237,7 @@ static int __init test_size_treshold(void)
 	if (!dst_page)
 		goto no_dst;
 	kernel_ptr = page_address(src_page);
-	user_ptr = vmap(&dst_page, 1, VM_IOREMAP, __pgprot(__P010));
+	user_ptr = vmap(&dst_page, 1, VM_IOREMAP, __pgprot(__PAGE_COPY));
 	if (!user_ptr)
 		goto no_vmap;
 
diff --git a/arch/arm/lib/xor-neon.c b/arch/arm/lib/xor-neon.c
index b99dd8e1c93f..522510baed49 100644
--- a/arch/arm/lib/xor-neon.c
+++ b/arch/arm/lib/xor-neon.c
@@ -17,17 +17,11 @@ MODULE_LICENSE("GPL");
 /*
  * Pull in the reference implementations while instructing GCC (through
  * -ftree-vectorize) to attempt to exploit implicit parallelism and emit
- * NEON instructions.
+ * NEON instructions. Clang does this by default at O2 so no pragma is
+ * needed.
  */
-#if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 6)
+#ifdef CONFIG_CC_IS_GCC
 #pragma GCC optimize "tree-vectorize"
-#else
-/*
- * While older versions of GCC do not generate incorrect code, they fail to
- * recognize the parallel nature of these functions, and emit plain ARM code,
- * which is known to be slower than the optimized ARM code in asm-arm/xor.h.
- */
-#warning This code requires at least version 4.6 of GCC
 #endif
 
 #pragma GCC diagnostic ignored "-Wunused-variable"
diff --git a/arch/arm/mach-pxa/Makefile.boot b/arch/arm/mach-airoha/Makefile
index bb6e353ecf06..a5857d0d02eb 100644
--- a/arch/arm/mach-pxa/Makefile.boot
+++ b/arch/arm/mach-airoha/Makefile
@@ -1,3 +1,2 @@
 # SPDX-License-Identifier: GPL-2.0-only
-   zreladdr-y	+= 0xa0008000
-
+obj-y			+= airoha.o
diff --git a/arch/arm/mach-airoha/airoha.c b/arch/arm/mach-airoha/airoha.c
new file mode 100644
index 000000000000..ea23b5abb478
--- /dev/null
+++ b/arch/arm/mach-airoha/airoha.c
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Device Tree support for Airoha SoCs
+ *
+ * Copyright (c) 2022 Felix Fietkau <nbd@nbd.name>
+ */
+#include <asm/mach/arch.h>
+
+static const char * const airoha_board_dt_compat[] = {
+	"airoha,en7523",
+	NULL,
+};
+
+DT_MACHINE_START(MEDIATEK_DT, "Airoha Cortex-A53 (Device Tree)")
+	.dt_compat	= airoha_board_dt_compat,
+MACHINE_END
diff --git a/arch/arm/mach-asm9260/Kconfig b/arch/arm/mach-asm9260/Kconfig
index a2e1d0aaf252..74e0f61c74c8 100644
--- a/arch/arm/mach-asm9260/Kconfig
+++ b/arch/arm/mach-asm9260/Kconfig
@@ -2,6 +2,7 @@
 config MACH_ASM9260
 	bool "Alphascale ASM9260"
 	depends on ARCH_MULTI_V5
+	depends on CPU_LITTLE_ENDIAN
 	select CPU_ARM926T
 	select ASM9260_TIMER
 	help
diff --git a/arch/arm/mach-aspeed/Kconfig b/arch/arm/mach-aspeed/Kconfig
index ea96d11b8502..080019aa6fcd 100644
--- a/arch/arm/mach-aspeed/Kconfig
+++ b/arch/arm/mach-aspeed/Kconfig
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 menuconfig ARCH_ASPEED
 	bool "Aspeed BMC architectures"
-	depends on ARCH_MULTI_V5 || ARCH_MULTI_V6 || ARCH_MULTI_V7
+	depends on (CPU_LITTLE_ENDIAN && ARCH_MULTI_V5) || ARCH_MULTI_V6 || ARCH_MULTI_V7
 	select SRAM
 	select WATCHDOG
 	select ASPEED_WATCHDOG
@@ -19,9 +19,9 @@ config MACH_ASPEED_G4
 	select PINCTRL_ASPEED_G4
 	select FTTMR010_TIMER
 	help
-	 Say yes if you intend to run on an Aspeed ast2400 or similar
-	 fourth generation BMCs, such as those used by OpenPower Power8
-	 systems.
+	  Say yes if you intend to run on an Aspeed ast2400 or similar
+	  fourth generation BMCs, such as those used by OpenPower Power8
+	  systems.
 
 config MACH_ASPEED_G5
 	bool "Aspeed SoC 5th Generation"
@@ -29,8 +29,8 @@ config MACH_ASPEED_G5
 	select PINCTRL_ASPEED_G5
 	select FTTMR010_TIMER
 	help
-	 Say yes if you intend to run on an Aspeed ast2500 or similar
-	 fifth generation Aspeed BMCs.
+	  Say yes if you intend to run on an Aspeed ast2500 or similar
+	  fifth generation Aspeed BMCs.
 
 config MACH_ASPEED_G6
 	bool "Aspeed SoC 6th Generation"
@@ -40,7 +40,7 @@ config MACH_ASPEED_G6
 	select ARM_GIC
 	select HAVE_ARM_ARCH_TIMER
 	help
-	 Say yes if you intend to run on an Aspeed ast2600 or similar
-	 sixth generation Aspeed BMCs.
+	  Say yes if you intend to run on an Aspeed ast2600 or similar
+	  sixth generation Aspeed BMCs.
 
 endif
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 02f6b108fd5d..3dd9e718661b 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -1,7 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0-only
 menuconfig ARCH_AT91
 	bool "AT91/Microchip SoCs"
-	depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M
+	depends on (CPU_LITTLE_ENDIAN && (ARCH_MULTI_V4T || ARCH_MULTI_V5)) || \
+		ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M
 	select ARM_CPU_SUSPEND if PM && ARCH_MULTI_V7
 	select COMMON_CLK_AT91
 	select GPIOLIB
@@ -63,6 +64,7 @@ config SOC_SAMA7G5
 	select HAVE_AT91_GENERATED_CLK
 	select HAVE_AT91_SAM9X60_PLL
 	select HAVE_AT91_UTMI
+	select PM_OPP
 	select SOC_SAMA7
 	help
 	  Select this if you are using one of Microchip's SAMA7G5 family SoC.
@@ -164,6 +166,15 @@ config ATMEL_CLOCKSOURCE_TCB
 	  to make a single 32-bit timer.
 	  It can also be used as a clock event device supporting oneshot mode.
 
+config MICROCHIP_CLOCKSOURCE_PIT64B
+	bool "64-bit Periodic Interval Timer (PIT64B) support"
+	default SOC_SAM9X60 || SOC_SAMA7
+	select MICROCHIP_PIT64B
+	help
+	  Select this to get a high resolution clockevent (SAM9X60) or
+	  clocksource and clockevent (SAMA7G5) based on Microchip 64-bit
+	  Periodic Interval Timer.
+
 config HAVE_AT91_UTMI
 	bool
 
@@ -210,6 +221,15 @@ config SOC_SAMA5
 config ATMEL_PM
 	bool
 
+config ATMEL_SECURE_PM
+	bool "Atmel Secure PM support"
+	depends on SOC_SAMA5D2 && ATMEL_PM
+	select ARM_PSCI
+	help
+	  When running under a TEE, the suspend mode must be requested to be set
+	  at TEE level. When enable, this option will use secure monitor calls
+	  to set the suspend level. PSCI is then used to enter suspend.
+
 config SOC_SAMA7
 	bool
 	select ARM_GIC
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 522b680b6446..0dcc37180588 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -7,7 +7,7 @@
 obj-$(CONFIG_SOC_AT91RM9200)	+= at91rm9200.o
 obj-$(CONFIG_SOC_AT91SAM9)	+= at91sam9.o
 obj-$(CONFIG_SOC_SAM9X60)	+= sam9x60.o
-obj-$(CONFIG_SOC_SAMA5)		+= sama5.o
+obj-$(CONFIG_SOC_SAMA5)		+= sama5.o sam_secure.o
 obj-$(CONFIG_SOC_SAMA7)		+= sama7.o
 obj-$(CONFIG_SOC_SAMV7)		+= samv7.o
 
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
deleted file mode 100644
index 5dde7328a7a9..000000000000
--- a/arch/arm/mach-at91/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-# Empty file waiting for deletion once Makefile.boot isn't needed any more.
-# Patch waits for application at
-# https://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=7889/1 .
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index dd6f4ce3f766..60dc56d8acfb 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -15,11 +15,10 @@
 #include <linux/parser.h>
 #include <linux/suspend.h>
 
+#include <linux/clk.h>
 #include <linux/clk/at91_pmc.h>
 #include <linux/platform_data/atmel.h>
 
-#include <soc/at91/pm.h>
-
 #include <asm/cacheflush.h>
 #include <asm/fncpy.h>
 #include <asm/system_misc.h>
@@ -27,6 +26,7 @@
 
 #include "generic.h"
 #include "pm.h"
+#include "sam_secure.h"
 
 #define BACKUP_DDR_PHY_CALIBRATION	(9)
 
@@ -47,8 +47,8 @@ struct at91_pm_bu {
 	unsigned long ddr_phy_calibration[BACKUP_DDR_PHY_CALIBRATION];
 };
 
-/*
- * struct at91_pm_sfrbu_offsets: registers mapping for SFRBU
+/**
+ * struct at91_pm_sfrbu_regs - registers mapping for SFRBU
  * @pswbu: power switch BU control registers
  */
 struct at91_pm_sfrbu_regs {
@@ -61,13 +61,64 @@ struct at91_pm_sfrbu_regs {
 };
 
 /**
+ * enum at91_pm_eth_clk - Ethernet clock indexes
+ * @AT91_PM_ETH_PCLK: pclk index
+ * @AT91_PM_ETH_HCLK: hclk index
+ * @AT91_PM_ETH_MAX_CLK: max index
+ */
+enum at91_pm_eth_clk {
+	AT91_PM_ETH_PCLK,
+	AT91_PM_ETH_HCLK,
+	AT91_PM_ETH_MAX_CLK,
+};
+
+/**
+ * enum at91_pm_eth - Ethernet controller indexes
+ * @AT91_PM_G_ETH: gigabit Ethernet controller index
+ * @AT91_PM_E_ETH: megabit Ethernet controller index
+ * @AT91_PM_MAX_ETH: max index
+ */
+enum at91_pm_eth {
+	AT91_PM_G_ETH,
+	AT91_PM_E_ETH,
+	AT91_PM_MAX_ETH,
+};
+
+/**
+ * struct at91_pm_quirk_eth - AT91 PM Ethernet quirks
+ * @dev: Ethernet device
+ * @np: Ethernet device node
+ * @clks: Ethernet clocks
+ * @modes: power management mode that this quirk applies to
+ * @dns_modes: do not suspend modes: stop suspending if Ethernet is configured
+ *	       as wakeup source but buggy and no other wakeup source is
+ *	       available
+ */
+struct at91_pm_quirk_eth {
+	struct device *dev;
+	struct device_node *np;
+	struct clk_bulk_data clks[AT91_PM_ETH_MAX_CLK];
+	u32 modes;
+	u32 dns_modes;
+};
+
+/**
+ * struct at91_pm_quirks - AT91 PM quirks
+ * @eth: Ethernet quirks
+ */
+struct at91_pm_quirks {
+	struct at91_pm_quirk_eth eth[AT91_PM_MAX_ETH];
+};
+
+/**
  * struct at91_soc_pm - AT91 SoC power management data structure
  * @config_shdwc_ws: wakeup sources configuration function for SHDWC
  * @config_pmc_ws: wakeup srouces configuration function for PMC
  * @ws_ids: wakup sources of_device_id array
+ * @bu: backup unit mapped data (for backup mode)
+ * @quirks: PM quirks
  * @data: PM data to be used on last phase of suspend
  * @sfrbu_regs: SFRBU registers mapping
- * @bu: backup unit mapped data (for backup mode)
  * @memcs: memory chip select
  */
 struct at91_soc_pm {
@@ -75,19 +126,22 @@ struct at91_soc_pm {
 	int (*config_pmc_ws)(void __iomem *pmc, u32 mode, u32 polarity);
 	const struct of_device_id *ws_ids;
 	struct at91_pm_bu *bu;
+	struct at91_pm_quirks quirks;
 	struct at91_pm_data data;
 	struct at91_pm_sfrbu_regs sfrbu_regs;
 	void *memcs;
 };
 
 /**
- * enum at91_pm_iomaps:	IOs that needs to be mapped for different PM modes
+ * enum at91_pm_iomaps - IOs that needs to be mapped for different PM modes
  * @AT91_PM_IOMAP_SHDWC:	SHDWC controller
  * @AT91_PM_IOMAP_SFRBU:	SFRBU controller
+ * @AT91_PM_IOMAP_ETHC:		Ethernet controller
  */
 enum at91_pm_iomaps {
 	AT91_PM_IOMAP_SHDWC,
 	AT91_PM_IOMAP_SFRBU,
+	AT91_PM_IOMAP_ETHC,
 };
 
 #define AT91_PM_IOMAP(name)	BIT(AT91_PM_IOMAP_##name)
@@ -146,7 +200,7 @@ static const struct wakeup_source_info ws_info[] = {
 
 static const struct of_device_id sama5d2_ws_ids[] = {
 	{ .compatible = "atmel,sama5d2-gem",		.data = &ws_info[0] },
-	{ .compatible = "atmel,at91rm9200-rtc",		.data = &ws_info[1] },
+	{ .compatible = "atmel,sama5d2-rtc",		.data = &ws_info[1] },
 	{ .compatible = "atmel,sama5d3-udc",		.data = &ws_info[2] },
 	{ .compatible = "atmel,at91rm9200-ohci",	.data = &ws_info[2] },
 	{ .compatible = "usb-ohci",			.data = &ws_info[2] },
@@ -157,24 +211,24 @@ static const struct of_device_id sama5d2_ws_ids[] = {
 };
 
 static const struct of_device_id sam9x60_ws_ids[] = {
-	{ .compatible = "atmel,at91sam9x5-rtc",		.data = &ws_info[1] },
+	{ .compatible = "microchip,sam9x60-rtc",	.data = &ws_info[1] },
 	{ .compatible = "atmel,at91rm9200-ohci",	.data = &ws_info[2] },
 	{ .compatible = "usb-ohci",			.data = &ws_info[2] },
 	{ .compatible = "atmel,at91sam9g45-ehci",	.data = &ws_info[2] },
 	{ .compatible = "usb-ehci",			.data = &ws_info[2] },
-	{ .compatible = "atmel,at91sam9260-rtt",	.data = &ws_info[4] },
+	{ .compatible = "microchip,sam9x60-rtt",	.data = &ws_info[4] },
 	{ .compatible = "cdns,sam9x60-macb",		.data = &ws_info[5] },
 	{ /* sentinel */ }
 };
 
 static const struct of_device_id sama7g5_ws_ids[] = {
-	{ .compatible = "atmel,at91sam9x5-rtc",		.data = &ws_info[1] },
+	{ .compatible = "microchip,sama7g5-rtc",	.data = &ws_info[1] },
 	{ .compatible = "microchip,sama7g5-ohci",	.data = &ws_info[2] },
 	{ .compatible = "usb-ohci",			.data = &ws_info[2] },
 	{ .compatible = "atmel,at91sam9g45-ehci",	.data = &ws_info[2] },
 	{ .compatible = "usb-ehci",			.data = &ws_info[2] },
 	{ .compatible = "microchip,sama7g5-sdhci",	.data = &ws_info[3] },
-	{ .compatible = "atmel,at91sam9260-rtt",	.data = &ws_info[4] },
+	{ .compatible = "microchip,sama7g5-rtt",	.data = &ws_info[4] },
 	{ /* sentinel */ }
 };
 
@@ -263,6 +317,141 @@ static int at91_sam9x60_config_pmc_ws(void __iomem *pmc, u32 mode, u32 polarity)
 	return 0;
 }
 
+static bool at91_pm_eth_quirk_is_valid(struct at91_pm_quirk_eth *eth)
+{
+	struct platform_device *pdev;
+
+	/* Interface NA in DT. */
+	if (!eth->np)
+		return false;
+
+	/* No quirks for this interface and current suspend mode. */
+	if (!(eth->modes & BIT(soc_pm.data.mode)))
+		return false;
+
+	if (!eth->dev) {
+		/* Driver not probed. */
+		pdev = of_find_device_by_node(eth->np);
+		if (!pdev)
+			return false;
+		eth->dev = &pdev->dev;
+	}
+
+	/* No quirks if device isn't a wakeup source. */
+	if (!device_may_wakeup(eth->dev)) {
+		put_device(eth->dev);
+		return false;
+	}
+
+	/* put_device(eth->dev) is called at the end of suspend. */
+	return true;
+}
+
+static int at91_pm_config_quirks(bool suspend)
+{
+	struct at91_pm_quirk_eth *eth;
+	int i, j, ret, tmp;
+
+	/*
+	 * Ethernet IPs who's device_node pointers are stored into
+	 * soc_pm.quirks.eth[].np cannot handle WoL packets while in ULP0, ULP1
+	 * or both due to a hardware bug. If they receive WoL packets while in
+	 * ULP0 or ULP1 IPs could stop working or the whole system could stop
+	 * working. We cannot handle this scenario in the ethernet driver itself
+	 * as the driver is common to multiple vendors and also we only know
+	 * here, in this file, if we suspend to ULP0 or ULP1 mode. Thus handle
+	 * these scenarios here, as quirks.
+	 */
+	for (i = 0; i < AT91_PM_MAX_ETH; i++) {
+		eth = &soc_pm.quirks.eth[i];
+
+		if (!at91_pm_eth_quirk_is_valid(eth))
+			continue;
+
+		/*
+		 * For modes in dns_modes mask the system blocks if quirk is not
+		 * applied but if applied the interface doesn't act at WoL
+		 * events. Thus take care to avoid suspending if this interface
+		 * is the only configured wakeup source.
+		 */
+		if (suspend && eth->dns_modes & BIT(soc_pm.data.mode)) {
+			int ws_count = 0;
+#ifdef CONFIG_PM_SLEEP
+			struct wakeup_source *ws;
+
+			for_each_wakeup_source(ws) {
+				if (ws->dev == eth->dev)
+					continue;
+
+				ws_count++;
+				break;
+			}
+#endif
+
+			/*
+			 * Checking !ws is good for all platforms with issues
+			 * even when both G_ETH and E_ETH are available as dns_modes
+			 * is populated only on G_ETH interface.
+			 */
+			if (!ws_count) {
+				pr_err("AT91: PM: Ethernet cannot resume from WoL!");
+				ret = -EPERM;
+				put_device(eth->dev);
+				eth->dev = NULL;
+				/* No need to revert clock settings for this eth. */
+				i--;
+				goto clk_unconfigure;
+			}
+		}
+
+		if (suspend) {
+			clk_bulk_disable_unprepare(AT91_PM_ETH_MAX_CLK, eth->clks);
+		} else {
+			ret = clk_bulk_prepare_enable(AT91_PM_ETH_MAX_CLK,
+						      eth->clks);
+			if (ret)
+				goto clk_unconfigure;
+			/*
+			 * Release the reference to eth->dev taken in
+			 * at91_pm_eth_quirk_is_valid().
+			 */
+			put_device(eth->dev);
+			eth->dev = NULL;
+		}
+	}
+
+	return 0;
+
+clk_unconfigure:
+	/*
+	 * In case of resume we reach this point if clk_prepare_enable() failed.
+	 * we don't want to revert the previous clk_prepare_enable() for the
+	 * other IP.
+	 */
+	for (j = i; j >= 0; j--) {
+		eth = &soc_pm.quirks.eth[j];
+		if (suspend) {
+			if (!at91_pm_eth_quirk_is_valid(eth))
+				continue;
+
+			tmp = clk_bulk_prepare_enable(AT91_PM_ETH_MAX_CLK, eth->clks);
+			if (tmp) {
+				pr_err("AT91: PM: failed to enable %s clocks\n",
+				       j == AT91_PM_G_ETH ? "geth" : "eth");
+			}
+		} else {
+			/*
+			 * Release the reference to eth->dev taken in
+			 * at91_pm_eth_quirk_is_valid().
+			 */
+			put_device(eth->dev);
+			eth->dev = NULL;
+		}
+	}
+
+	return ret;
+}
+
 /*
  * Called after processes are frozen, but before we shutdown devices.
  */
@@ -350,10 +539,42 @@ extern u32 at91_pm_suspend_in_sram_sz;
 
 static int at91_suspend_finish(unsigned long val)
 {
+	unsigned char modified_gray_code[] = {
+		0x00, 0x01, 0x02, 0x03, 0x06, 0x07, 0x04, 0x05, 0x0c, 0x0d,
+		0x0e, 0x0f, 0x0a, 0x0b, 0x08, 0x09, 0x18, 0x19, 0x1a, 0x1b,
+		0x1e, 0x1f, 0x1c, 0x1d, 0x14, 0x15, 0x16, 0x17, 0x12, 0x13,
+		0x10, 0x11,
+	};
+	unsigned int tmp, index;
 	int i;
 
 	if (soc_pm.data.mode == AT91_PM_BACKUP && soc_pm.data.ramc_phy) {
 		/*
+		 * Bootloader will perform DDR recalibration and will try to
+		 * restore the ZQ0SR0 with the value saved here. But the
+		 * calibration is buggy and restoring some values from ZQ0SR0
+		 * is forbidden and risky thus we need to provide processed
+		 * values for these (modified gray code values).
+		 */
+		tmp = readl(soc_pm.data.ramc_phy + DDR3PHY_ZQ0SR0);
+
+		/* Store pull-down output impedance select. */
+		index = (tmp >> DDR3PHY_ZQ0SR0_PDO_OFF) & 0x1f;
+		soc_pm.bu->ddr_phy_calibration[0] = modified_gray_code[index];
+
+		/* Store pull-up output impedance select. */
+		index = (tmp >> DDR3PHY_ZQ0SR0_PUO_OFF) & 0x1f;
+		soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index];
+
+		/* Store pull-down on-die termination impedance select. */
+		index = (tmp >> DDR3PHY_ZQ0SR0_PDODT_OFF) & 0x1f;
+		soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index];
+
+		/* Store pull-up on-die termination impedance select. */
+		index = (tmp >> DDR3PHY_ZQ0SRO_PUODT_OFF) & 0x1f;
+		soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index];
+
+		/*
 		 * The 1st 8 words of memory might get corrupted in the process
 		 * of DDR PHY recalibration; it is saved here in securam and it
 		 * will be restored later, after recalibration, by bootloader
@@ -427,15 +648,11 @@ static void at91_pm_suspend(suspend_state_t state)
  */
 static int at91_pm_enter(suspend_state_t state)
 {
-#ifdef CONFIG_PINCTRL_AT91
-	/*
-	 * FIXME: this is needed to communicate between the pinctrl driver and
-	 * the PM implementation in the machine. Possibly part of the PM
-	 * implementation should be moved down into the pinctrl driver and get
-	 * called as part of the generic suspend/resume path.
-	 */
-	at91_pinctrl_gpio_suspend();
-#endif
+	int ret;
+
+	ret = at91_pm_config_quirks(true);
+	if (ret)
+		return ret;
 
 	switch (state) {
 	case PM_SUSPEND_MEM:
@@ -461,9 +678,7 @@ static int at91_pm_enter(suspend_state_t state)
 	}
 
 error:
-#ifdef CONFIG_PINCTRL_AT91
-	at91_pinctrl_gpio_resume();
-#endif
+	at91_pm_config_quirks(false);
 	return 0;
 }
 
@@ -605,6 +820,30 @@ static void at91sam9_sdram_standby(void)
 		at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1);
 }
 
+static void sama7g5_standby(void)
+{
+	int pwrtmg, ratio;
+
+	pwrtmg = readl(soc_pm.data.ramc[0] + UDDRC_PWRCTL);
+	ratio = readl(soc_pm.data.pmc + AT91_PMC_RATIO);
+
+	/*
+	 * Place RAM into self-refresh after a maximum idle clocks. The maximum
+	 * idle clocks is configured by bootloader in
+	 * UDDRC_PWRMGT.SELFREF_TO_X32.
+	 */
+	writel(pwrtmg | UDDRC_PWRCTL_SELFREF_EN,
+	       soc_pm.data.ramc[0] + UDDRC_PWRCTL);
+	/* Divide CPU clock by 16. */
+	writel(ratio & ~AT91_PMC_RATIO_RATIO, soc_pm.data.pmc + AT91_PMC_RATIO);
+
+	cpu_do_idle();
+
+	/* Restore previous configuration. */
+	writel(ratio, soc_pm.data.pmc + AT91_PMC_RATIO);
+	writel(pwrtmg, soc_pm.data.ramc[0] + UDDRC_PWRCTL);
+}
+
 struct ramc_info {
 	void (*idle)(void);
 	unsigned int memctrl;
@@ -615,6 +854,7 @@ static const struct ramc_info ramc_infos[] __initconst = {
 	{ .idle = at91sam9_sdram_standby, .memctrl = AT91_MEMCTRL_SDRAMC},
 	{ .idle = at91_ddr_standby, .memctrl = AT91_MEMCTRL_DDRSDR},
 	{ .idle = sama5d3_ddr_standby, .memctrl = AT91_MEMCTRL_DDRSDR},
+	{ .idle = sama7g5_standby, },
 };
 
 static const struct of_device_id ramc_ids[] __initconst = {
@@ -622,7 +862,7 @@ static const struct of_device_id ramc_ids[] __initconst = {
 	{ .compatible = "atmel,at91sam9260-sdramc", .data = &ramc_infos[1] },
 	{ .compatible = "atmel,at91sam9g45-ddramc", .data = &ramc_infos[2] },
 	{ .compatible = "atmel,sama5d3-ddramc", .data = &ramc_infos[3] },
-	{ .compatible = "microchip,sama7g5-uddrc", },
+	{ .compatible = "microchip,sama7g5-uddrc", .data = &ramc_infos[4], },
 	{ /*sentinel*/ }
 };
 
@@ -843,10 +1083,6 @@ static int __init at91_pm_backup_init(void)
 		of_scan_flat_dt(at91_pm_backup_scan_memcs, &located);
 		if (!located)
 			goto securam_fail;
-
-		/* DDR3PHY_ZQ0SR0 */
-		soc_pm.bu->ddr_phy_calibration[0] = readl(soc_pm.data.ramc_phy +
-							  0x188);
 	}
 
 	return 0;
@@ -856,6 +1092,35 @@ securam_fail:
 	return ret;
 }
 
+static void __init at91_pm_secure_init(void)
+{
+	int suspend_mode;
+	struct arm_smccc_res res;
+
+	suspend_mode = soc_pm.data.suspend_mode;
+
+	res = sam_smccc_call(SAMA5_SMC_SIP_SET_SUSPEND_MODE,
+			     suspend_mode, 0);
+	if (res.a0 == 0) {
+		pr_info("AT91: Secure PM: suspend mode set to %s\n",
+			pm_modes[suspend_mode].pattern);
+		return;
+	}
+
+	pr_warn("AT91: Secure PM: %s mode not supported !\n",
+		pm_modes[suspend_mode].pattern);
+
+	res = sam_smccc_call(SAMA5_SMC_SIP_GET_SUSPEND_MODE, 0, 0);
+	if (res.a0 == 0) {
+		pr_warn("AT91: Secure PM: failed to get default mode\n");
+		return;
+	}
+
+	pr_info("AT91: Secure PM: using default suspend mode %s\n",
+		pm_modes[suspend_mode].pattern);
+
+	soc_pm.data.suspend_mode = res.a1;
+}
 static const struct of_device_id atmel_shdwc_ids[] = {
 	{ .compatible = "atmel,sama5d2-shdwc" },
 	{ .compatible = "microchip,sam9x60-shdwc" },
@@ -863,10 +1128,99 @@ static const struct of_device_id atmel_shdwc_ids[] = {
 	{ /* sentinel. */ }
 };
 
+static const struct of_device_id gmac_ids[] __initconst = {
+	{ .compatible = "atmel,sama5d3-gem" },
+	{ .compatible = "atmel,sama5d2-gem" },
+	{ .compatible = "atmel,sama5d29-gem" },
+	{ .compatible = "microchip,sama7g5-gem" },
+	{ },
+};
+
+static const struct of_device_id emac_ids[] __initconst = {
+	{ .compatible = "atmel,sama5d3-macb" },
+	{ .compatible = "microchip,sama7g5-emac" },
+	{ },
+};
+
+/*
+ * Replaces _mode_to_replace with a supported mode that doesn't depend
+ * on controller pointed by _map_bitmask
+ * @_maps: u32 array containing AT91_PM_IOMAP() flags and indexed by AT91
+ * PM mode
+ * @_map_bitmask: AT91_PM_IOMAP() bitmask; if _mode_to_replace depends on
+ * controller represented by _map_bitmask, _mode_to_replace needs to be
+ * updated
+ * @_mode_to_replace: standby_mode or suspend_mode that need to be
+ * updated
+ * @_mode_to_check: standby_mode or suspend_mode; this is needed here
+ * to avoid having standby_mode and suspend_mode set with the same AT91
+ * PM mode
+ */
+#define AT91_PM_REPLACE_MODE(_maps, _map_bitmask, _mode_to_replace,	\
+			     _mode_to_check)				\
+	do {								\
+		if (((_maps)[(_mode_to_replace)]) & (_map_bitmask)) {	\
+			int _mode_to_use, _mode_complementary;		\
+			/* Use ULP0 if it doesn't need _map_bitmask. */	\
+			if (!((_maps)[AT91_PM_ULP0] & (_map_bitmask))) {\
+				_mode_to_use = AT91_PM_ULP0;		\
+				_mode_complementary = AT91_PM_STANDBY;	\
+			} else {					\
+				_mode_to_use = AT91_PM_STANDBY;		\
+				_mode_complementary = AT91_PM_STANDBY;	\
+			}						\
+									\
+			if ((_mode_to_check) != _mode_to_use)		\
+				(_mode_to_replace) = _mode_to_use;	\
+			else						\
+				(_mode_to_replace) = _mode_complementary;\
+		}							\
+	} while (0)
+
+/*
+ * Replaces standby and suspend modes with default supported modes:
+ * ULP0 and STANDBY.
+ * @_maps: u32 array indexed by AT91 PM mode containing AT91_PM_IOMAP()
+ * flags
+ * @_map: controller specific name; standby and suspend mode need to be
+ * replaced in order to not depend on this controller
+ */
+#define AT91_PM_REPLACE_MODES(_maps, _map)				\
+	do {								\
+		AT91_PM_REPLACE_MODE((_maps), BIT(AT91_PM_IOMAP_##_map),\
+				     (soc_pm.data.standby_mode),	\
+				     (soc_pm.data.suspend_mode));	\
+		AT91_PM_REPLACE_MODE((_maps), BIT(AT91_PM_IOMAP_##_map),\
+				     (soc_pm.data.suspend_mode),	\
+				     (soc_pm.data.standby_mode));	\
+	} while (0)
+
+static int __init at91_pm_get_eth_clks(struct device_node *np,
+				       struct clk_bulk_data *clks)
+{
+	clks[AT91_PM_ETH_PCLK].clk = of_clk_get_by_name(np, "pclk");
+	if (IS_ERR(clks[AT91_PM_ETH_PCLK].clk))
+		return PTR_ERR(clks[AT91_PM_ETH_PCLK].clk);
+
+	clks[AT91_PM_ETH_HCLK].clk = of_clk_get_by_name(np, "hclk");
+	if (IS_ERR(clks[AT91_PM_ETH_HCLK].clk))
+		return PTR_ERR(clks[AT91_PM_ETH_HCLK].clk);
+
+	return 0;
+}
+
+static int __init at91_pm_eth_clks_empty(struct clk_bulk_data *clks)
+{
+	return IS_ERR(clks[AT91_PM_ETH_PCLK].clk) ||
+	       IS_ERR(clks[AT91_PM_ETH_HCLK].clk);
+}
+
 static void __init at91_pm_modes_init(const u32 *maps, int len)
 {
+	struct at91_pm_quirk_eth *gmac = &soc_pm.quirks.eth[AT91_PM_G_ETH];
+	struct at91_pm_quirk_eth *emac = &soc_pm.quirks.eth[AT91_PM_E_ETH];
 	struct device_node *np;
-	int ret, mode;
+	int ret;
 
 	ret = at91_pm_backup_init();
 	if (ret) {
@@ -881,17 +1235,7 @@ static void __init at91_pm_modes_init(const u32 *maps, int len)
 		np = of_find_matching_node(NULL, atmel_shdwc_ids);
 		if (!np) {
 			pr_warn("%s: failed to find shdwc!\n", __func__);
-
-			/* Use ULP0 if it doesn't needs SHDWC.*/
-			if (!(maps[AT91_PM_ULP0] & AT91_PM_IOMAP(SHDWC)))
-				mode = AT91_PM_ULP0;
-			else
-				mode = AT91_PM_STANDBY;
-
-			if (maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SHDWC))
-				soc_pm.data.standby_mode = mode;
-			if (maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(SHDWC))
-				soc_pm.data.suspend_mode = mode;
+			AT91_PM_REPLACE_MODES(maps, SHDWC);
 		} else {
 			soc_pm.data.shdwc = of_iomap(np, 0);
 			of_node_put(np);
@@ -903,27 +1247,48 @@ static void __init at91_pm_modes_init(const u32 *maps, int len)
 		np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-sfrbu");
 		if (!np) {
 			pr_warn("%s: failed to find sfrbu!\n", __func__);
-
-			/*
-			 * Use ULP0 if it doesn't need SHDWC or if SHDWC
-			 * was already located.
-			 */
-			if (!(maps[AT91_PM_ULP0] & AT91_PM_IOMAP(SHDWC)) ||
-			    soc_pm.data.shdwc)
-				mode = AT91_PM_ULP0;
-			else
-				mode = AT91_PM_STANDBY;
-
-			if (maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SFRBU))
-				soc_pm.data.standby_mode = mode;
-			if (maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(SFRBU))
-				soc_pm.data.suspend_mode = mode;
+			AT91_PM_REPLACE_MODES(maps, SFRBU);
 		} else {
 			soc_pm.data.sfrbu = of_iomap(np, 0);
 			of_node_put(np);
 		}
 	}
 
+	if ((at91_is_pm_mode_active(AT91_PM_ULP1) ||
+	     at91_is_pm_mode_active(AT91_PM_ULP0) ||
+	     at91_is_pm_mode_active(AT91_PM_ULP0_FAST)) &&
+	    (maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(ETHC) ||
+	     maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(ETHC))) {
+		np = of_find_matching_node(NULL, gmac_ids);
+		if (!np) {
+			np = of_find_matching_node(NULL, emac_ids);
+			if (np)
+				goto get_emac_clks;
+			AT91_PM_REPLACE_MODES(maps, ETHC);
+			goto unmap_unused_nodes;
+		} else {
+			gmac->np = np;
+			at91_pm_get_eth_clks(np, gmac->clks);
+		}
+
+		np = of_find_matching_node(NULL, emac_ids);
+		if (!np) {
+			if (at91_pm_eth_clks_empty(gmac->clks))
+				AT91_PM_REPLACE_MODES(maps, ETHC);
+		} else {
+get_emac_clks:
+			emac->np = np;
+			ret = at91_pm_get_eth_clks(np, emac->clks);
+			if (ret && at91_pm_eth_clks_empty(gmac->clks)) {
+				of_node_put(gmac->np);
+				of_node_put(emac->np);
+				gmac->np = NULL;
+				emac->np = NULL;
+			}
+		}
+	}
+
+unmap_unused_nodes:
 	/* Unmap all unnecessary. */
 	if (soc_pm.data.shdwc &&
 	    !(maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SHDWC) ||
@@ -1159,17 +1524,30 @@ void __init sama5_pm_init(void)
 	static const int modes[] __initconst = {
 		AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP0_FAST,
 	};
+	static const u32 iomaps[] __initconst = {
+		[AT91_PM_ULP0]		= AT91_PM_IOMAP(ETHC),
+		[AT91_PM_ULP0_FAST]	= AT91_PM_IOMAP(ETHC),
+	};
 	int ret;
 
 	if (!IS_ENABLED(CONFIG_SOC_SAMA5))
 		return;
 
 	at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
+	at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps));
 	ret = at91_dt_ramc(false);
 	if (ret)
 		return;
 
 	at91_pm_init(NULL);
+
+	/* Quirks applies to ULP0, ULP0 fast and ULP1 modes. */
+	soc_pm.quirks.eth[AT91_PM_G_ETH].modes = BIT(AT91_PM_ULP0) |
+						 BIT(AT91_PM_ULP0_FAST) |
+						 BIT(AT91_PM_ULP1);
+	/* Do not suspend in ULP0, ULP0 fast if GETH is the only wakeup source. */
+	soc_pm.quirks.eth[AT91_PM_G_ETH].dns_modes = BIT(AT91_PM_ULP0) |
+						     BIT(AT91_PM_ULP0_FAST);
 }
 
 void __init sama5d2_pm_init(void)
@@ -1179,7 +1557,10 @@ void __init sama5d2_pm_init(void)
 		AT91_PM_BACKUP,
 	};
 	static const u32 iomaps[] __initconst = {
-		[AT91_PM_ULP1]		= AT91_PM_IOMAP(SHDWC),
+		[AT91_PM_ULP0]		= AT91_PM_IOMAP(ETHC),
+		[AT91_PM_ULP0_FAST]	= AT91_PM_IOMAP(ETHC),
+		[AT91_PM_ULP1]		= AT91_PM_IOMAP(SHDWC) |
+					  AT91_PM_IOMAP(ETHC),
 		[AT91_PM_BACKUP]	= AT91_PM_IOMAP(SHDWC) |
 					  AT91_PM_IOMAP(SFRBU),
 	};
@@ -1188,6 +1569,12 @@ void __init sama5d2_pm_init(void)
 	if (!IS_ENABLED(CONFIG_SOC_SAMA5D2))
 		return;
 
+	if (IS_ENABLED(CONFIG_ATMEL_SECURE_PM)) {
+		pr_warn("AT91: Secure PM: ignoring standby mode\n");
+		at91_pm_secure_init();
+		return;
+	}
+
 	at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
 	at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps));
 	ret = at91_dt_ramc(false);
@@ -1204,6 +1591,17 @@ void __init sama5d2_pm_init(void)
 	soc_pm.sfrbu_regs.pswbu.ctrl = BIT(0);
 	soc_pm.sfrbu_regs.pswbu.softsw = BIT(1);
 	soc_pm.sfrbu_regs.pswbu.state = BIT(3);
+
+	/* Quirk applies to ULP0, ULP0 fast and ULP1 modes. */
+	soc_pm.quirks.eth[AT91_PM_G_ETH].modes = BIT(AT91_PM_ULP0) |
+						 BIT(AT91_PM_ULP0_FAST) |
+						 BIT(AT91_PM_ULP1);
+	/*
+	 * Do not suspend in ULP0, ULP0 fast if GETH is the only wakeup
+	 * source.
+	 */
+	soc_pm.quirks.eth[AT91_PM_G_ETH].dns_modes = BIT(AT91_PM_ULP0) |
+						     BIT(AT91_PM_ULP0_FAST);
 }
 
 void __init sama7_pm_init(void)
@@ -1214,7 +1612,8 @@ void __init sama7_pm_init(void)
 	static const u32 iomaps[] __initconst = {
 		[AT91_PM_ULP0]		= AT91_PM_IOMAP(SFRBU),
 		[AT91_PM_ULP1]		= AT91_PM_IOMAP(SFRBU) |
-					  AT91_PM_IOMAP(SHDWC),
+					  AT91_PM_IOMAP(SHDWC) |
+					  AT91_PM_IOMAP(ETHC),
 		[AT91_PM_BACKUP]	= AT91_PM_IOMAP(SFRBU) |
 					  AT91_PM_IOMAP(SHDWC),
 	};
@@ -1239,6 +1638,10 @@ void __init sama7_pm_init(void)
 	soc_pm.sfrbu_regs.pswbu.ctrl = BIT(0);
 	soc_pm.sfrbu_regs.pswbu.softsw = BIT(1);
 	soc_pm.sfrbu_regs.pswbu.state = BIT(2);
+
+	/* Quirks applies to ULP1 for both Ethernet interfaces. */
+	soc_pm.quirks.eth[AT91_PM_E_ETH].modes = BIT(AT91_PM_ULP1);
+	soc_pm.quirks.eth[AT91_PM_G_ETH].modes = BIT(AT91_PM_ULP1);
 }
 
 static int __init at91_pm_modes_select(char *str)
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
index fdb4f63ecde4..e4904faf1753 100644
--- a/arch/arm/mach-at91/pm_suspend.S
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -159,7 +159,7 @@ sr_ena_1:
 
 	/* Switch to self-refresh. */
 	ldr	tmp1, [r2, #UDDRC_PWRCTL]
-	orr	tmp1, tmp1, #UDDRC_PWRCTRL_SELFREF_SW
+	orr	tmp1, tmp1, #UDDRC_PWRCTL_SELFREF_SW
 	str	tmp1, [r2, #UDDRC_PWRCTL]
 
 sr_ena_2:
@@ -169,12 +169,23 @@ sr_ena_2:
 	cmp	tmp1, #UDDRC_STAT_SELFREF_TYPE_SW
 	bne	sr_ena_2
 
-	/* Put DDR PHY's DLL in bypass mode for non-backup modes. */
+	/* Disable DX DLLs for non-backup modes. */
 	cmp	r7, #AT91_PM_BACKUP
 	beq	sr_ena_3
-	ldr	tmp1, [r3, #DDR3PHY_PIR]
-	orr	tmp1, tmp1, #DDR3PHY_PIR_DLLBYP
-	str	tmp1, [r3, #DDR3PHY_PIR]
+
+	/* Do not soft reset the AC DLL. */
+	ldr	tmp1, [r3, DDR3PHY_ACDLLCR]
+	bic	tmp1, tmp1, DDR3PHY_ACDLLCR_DLLSRST
+	str	tmp1, [r3, DDR3PHY_ACDLLCR]
+
+	/* Disable DX DLLs. */
+	ldr	tmp1, [r3, #DDR3PHY_DX0DLLCR]
+	orr	tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS
+	str	tmp1, [r3, #DDR3PHY_DX0DLLCR]
+
+	ldr	tmp1, [r3, #DDR3PHY_DX1DLLCR]
+	orr	tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS
+	str	tmp1, [r3, #DDR3PHY_DX1DLLCR]
 
 sr_ena_3:
 	/* Power down DDR PHY data receivers. */
@@ -221,10 +232,14 @@ sr_ena_3:
 	bic	tmp1, tmp1, #DDR3PHY_DSGCR_ODTPDD_ODT0
 	str	tmp1, [r3, #DDR3PHY_DSGCR]
 
-	/* Take DDR PHY's DLL out of bypass mode. */
-	ldr	tmp1, [r3, #DDR3PHY_PIR]
-	bic	tmp1, tmp1, #DDR3PHY_PIR_DLLBYP
-	str	tmp1, [r3, #DDR3PHY_PIR]
+	/* Enable DX DLLs. */
+	ldr	tmp1, [r3, #DDR3PHY_DX0DLLCR]
+	bic	tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS
+	str	tmp1, [r3, #DDR3PHY_DX0DLLCR]
+
+	ldr	tmp1, [r3, #DDR3PHY_DX1DLLCR]
+	bic	tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS
+	str	tmp1, [r3, #DDR3PHY_DX1DLLCR]
 
 	/* Enable quasi-dynamic programming. */
 	mov	tmp1, #0
@@ -276,7 +291,7 @@ sr_dis_5:
 
 	/* Trigger self-refresh exit. */
 	ldr	tmp1, [r2, #UDDRC_PWRCTL]
-	bic	tmp1, tmp1, #UDDRC_PWRCTRL_SELFREF_SW
+	bic	tmp1, tmp1, #UDDRC_PWRCTL_SELFREF_SW
 	str	tmp1, [r2, #UDDRC_PWRCTL]
 
 sr_dis_6:
diff --git a/arch/arm/mach-at91/sam_secure.c b/arch/arm/mach-at91/sam_secure.c
new file mode 100644
index 000000000000..f7789cbe289f
--- /dev/null
+++ b/arch/arm/mach-at91/sam_secure.c
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2022, Microchip
+ */
+
+#include <linux/arm-smccc.h>
+#include <linux/of.h>
+
+#include "sam_secure.h"
+
+static bool optee_available;
+
+#define SAM_SIP_SMC_STD_CALL_VAL(func_num) \
+	ARM_SMCCC_CALL_VAL(ARM_SMCCC_STD_CALL, ARM_SMCCC_SMC_32, \
+	ARM_SMCCC_OWNER_SIP, (func_num))
+
+struct arm_smccc_res sam_smccc_call(u32 fn, u32 arg0, u32 arg1)
+{
+	struct arm_smccc_res res = {.a0 = -1};
+
+	if (WARN_ON(!optee_available))
+		return res;
+
+	arm_smccc_smc(SAM_SIP_SMC_STD_CALL_VAL(fn), arg0, arg1, 0, 0, 0, 0, 0,
+		      &res);
+
+	return res;
+}
+
+bool sam_linux_is_optee_available(void)
+{
+	/* If optee has been detected, then we are running in normal world */
+	return optee_available;
+}
+
+void __init sam_secure_init(void)
+{
+	struct device_node *np;
+
+	/*
+	 * We only check that the OP-TEE node is present and available. The
+	 * OP-TEE kernel driver is not needed for the type of interaction made
+	 * with OP-TEE here so the driver's status is not checked.
+	 */
+	np = of_find_node_by_path("/firmware/optee");
+	if (np && of_device_is_available(np))
+		optee_available = true;
+	of_node_put(np);
+
+	if (optee_available)
+		pr_info("Running under OP-TEE firmware\n");
+}
diff --git a/arch/arm/mach-at91/sam_secure.h b/arch/arm/mach-at91/sam_secure.h
new file mode 100644
index 000000000000..1a0b5ebbfc39
--- /dev/null
+++ b/arch/arm/mach-at91/sam_secure.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2022, Microchip
+ */
+
+#ifndef SAM_SECURE_H
+#define SAM_SECURE_H
+
+#include <linux/arm-smccc.h>
+
+/* Secure Monitor mode APIs */
+#define SAMA5_SMC_SIP_SET_SUSPEND_MODE	0x400
+#define SAMA5_SMC_SIP_GET_SUSPEND_MODE	0x401
+
+void __init sam_secure_init(void);
+struct arm_smccc_res sam_smccc_call(u32 fn, u32 arg0, u32 arg1);
+bool sam_linux_is_optee_available(void);
+
+#endif /* SAM_SECURE_H */
diff --git a/arch/arm/mach-at91/sama5.c b/arch/arm/mach-at91/sama5.c
index 89dab7cf01e8..bf2b5c6a18c6 100644
--- a/arch/arm/mach-at91/sama5.c
+++ b/arch/arm/mach-at91/sama5.c
@@ -9,11 +9,26 @@
 #include <linux/of.h>
 #include <linux/of_platform.h>
 
+#include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+#include <asm/outercache.h>
 #include <asm/system_misc.h>
 
 #include "generic.h"
+#include "sam_secure.h"
+
+static void sama5_l2c310_write_sec(unsigned long val, unsigned reg)
+{
+	/* OP-TEE configures the L2 cache and does not allow modifying it yet */
+}
+
+static void __init sama5_secure_cache_init(void)
+{
+	sam_secure_init();
+	if (IS_ENABLED(CONFIG_OUTER_CACHE) && sam_linux_is_optee_available())
+		outer_cache.write_sec = sama5_l2c310_write_sec;
+}
 
 static void __init sama5_dt_device_init(void)
 {
@@ -58,6 +73,7 @@ static const char *const sama5d2_compat[] __initconst = {
 DT_MACHINE_START(sama5d2, "Atmel SAMA5")
 	/* Maintainer: Atmel */
 	.init_machine	= sama5d2_init,
+	.init_early	= sama5_secure_cache_init,
 	.dt_compat	= sama5d2_compat,
 	.l2c_aux_mask	= ~0UL,
 MACHINE_END
diff --git a/arch/arm/mach-axxia/platsmp.c b/arch/arm/mach-axxia/platsmp.c
index 512943eae30a..2e203626eda5 100644
--- a/arch/arm/mach-axxia/platsmp.c
+++ b/arch/arm/mach-axxia/platsmp.c
@@ -39,6 +39,7 @@ static int axxia_boot_secondary(unsigned int cpu, struct task_struct *idle)
 		return -ENOENT;
 
 	syscon = of_iomap(syscon_np, 0);
+	of_node_put(syscon_np);
 	if (!syscon)
 		return -ENOMEM;
 
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index bd3f82788ebc..8789d93a7c04 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -54,8 +54,6 @@ config ARCH_BCM_NSP
 	select ARM_ERRATA_775420
 	select ARM_ERRATA_764369 if SMP
 	select ARM_TIMER_SP804
-	select THERMAL
-	select THERMAL_OF
 	help
 	  Support for Broadcom Northstar Plus SoC.
 	  Broadcom Northstar Plus family of SoCs are used for switching control
@@ -182,24 +180,6 @@ config ARCH_BCM_53573
 	  The base chip is BCM53573 and there are some packaging modifications
 	  like BCM47189 and BCM47452.
 
-config ARCH_BCM_63XX
-	bool "Broadcom BCM63xx DSL SoC"
-	depends on ARCH_MULTI_V7
-	depends on MMU
-	select ARCH_HAS_RESET_CONTROLLER
-	select ARM_ERRATA_754322
-	select ARM_ERRATA_764369 if SMP
-	select ARM_GIC
-	select ARM_GLOBAL_TIMER
-	select CACHE_L2X0
-	select HAVE_ARM_ARCH_TIMER
-	select HAVE_ARM_TWD if SMP
-	select HAVE_ARM_SCU if SMP
-	help
-	  This enables support for systems based on Broadcom DSL SoCs.
-	  It currently supports the 'BCM63XX' ARM-based family, which includes
-	  the BCM63138 variant.
-
 config ARCH_BRCMSTB
 	bool "Broadcom BCM7XXX based boards"
 	depends on ARCH_MULTI_V7
@@ -219,4 +199,58 @@ config ARCH_BRCMSTB
 	  This enables support for Broadcom ARM-based set-top box chipsets,
 	  including the 7445 family of chips.
 
+menuconfig ARCH_BCMBCA
+	bool "Broadcom Broadband Carrier Access (BCA) origin SoC"
+	depends on ARCH_MULTI_V7
+	select ARM_AMBA
+	select ARM_GIC
+	select HAVE_ARM_ARCH_TIMER
+	help
+	  Say Y if you intend to run the kernel on a Broadcom Broadband ARM-based
+	  BCA chipset.
+
+	  This enables support for Broadcom BCA ARM-based broadband chipsets,
+	  including the DSL, PON and Wireless family of chips.
+
+comment "BCMBCA sub platforms"
+
+if ARCH_BCMBCA
+
+config ARCH_BCMBCA_CORTEXA7
+	bool "Cortex-A7 SoCs"
+	help
+	  Say Y if you intend to run the kernel on a Broadcom Broadband ARM A7
+	  based chipset.
+
+	  This enables support for Broadcom BCA ARM A7 broadband chipsets,
+	  including various DSL, PON and Wireless family of chips.
+
+config ARCH_BCMBCA_CORTEXA9
+	bool "Cortex-A9 SoCS"
+	select ARM_ERRATA_754322
+	select ARM_ERRATA_764369 if SMP
+	select ARCH_HAS_RESET_CONTROLLER
+	select ARM_GLOBAL_TIMER
+	select CACHE_L2X0
+	select HAVE_ARM_TWD if SMP
+	select HAVE_ARM_SCU if SMP
+	help
+	  Say Y if you intend to run the kernel on a Broadcom Broadband ARM A9
+	  based BCA chipset.
+
+	  This enables support for Broadcom BCA ARM A9 broadband chipset. Currently
+	  only DSL chip BCM63138.
+
+config ARCH_BCMBCA_BRAHMAB15
+	bool "Brahma-B15 SoCs"
+	select ARM_ERRATA_798181 if SMP
+	help
+	  Say Y if you intend to run the kernel on a Broadcom Broadband ARM B15
+	  based BCA chipset.
+
+	  This enables support for Broadcom BCA ARM B15 broadband chipset. Currently
+	  only DSL chip BCM63148.
+
+endif
+
 endif
diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
index 7baa8c9427d5..2e523f29ec3b 100644
--- a/arch/arm/mach-bcm/Makefile
+++ b/arch/arm/mach-bcm/Makefile
@@ -1,14 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0-only
 #
 # Copyright (C) 2012-2015 Broadcom Corporation
 #
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation version 2.
-#
-# This program is distributed "as is" WITHOUT ANY WARRANTY of any
-# kind, whether express or implied; without even the implied warranty
-# of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
 
 # Cygnus
 obj-$(CONFIG_ARCH_BCM_CYGNUS) +=  bcm_cygnus.o
@@ -40,6 +33,7 @@ obj-$(CONFIG_ARCH_BCM_MOBILE_L2_CACHE) += kona_l2_cache.o
 
 # Support for secure monitor traps
 obj-$(CONFIG_ARCH_BCM_MOBILE_SMC) += bcm_kona_smc.o
+CFLAGS_REMOVE_bcm_kona_smc.o += $(CC_FLAGS_FTRACE)
 
 # BCM2835
 ifeq ($(CONFIG_ARCH_BCM2835),y)
@@ -56,14 +50,13 @@ ifeq ($(CONFIG_ARCH_BCM_5301X),y)
 obj-$(CONFIG_SMP)		+= platsmp.o
 endif
 
-# BCM63XXx
-ifeq ($(CONFIG_ARCH_BCM_63XX),y)
-obj-y				+= bcm63xx.o
-obj-$(CONFIG_SMP)		+= bcm63xx_smp.o bcm63xx_pmb.o
-endif
-
 ifeq ($(CONFIG_ARCH_BRCMSTB),y)
 CFLAGS_platsmp-brcmstb.o	+= -march=armv7-a
 obj-y				+= brcmstb.o
 obj-$(CONFIG_SMP)		+= platsmp-brcmstb.o
 endif
+
+# BCMBCA
+ifeq ($(CONFIG_ARCH_BCMBCA),y)
+obj-$(CONFIG_SMP)		+= bcm63xx_smp.o bcm63xx_pmb.o
+endif
diff --git a/arch/arm/mach-bcm/bcm63xx.c b/arch/arm/mach-bcm/bcm63xx.c
deleted file mode 100644
index c4c66ae51308..000000000000
--- a/arch/arm/mach-bcm/bcm63xx.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright (C) 2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/of_platform.h>
-
-#include <asm/mach/arch.h>
-
-static const char * const bcm63xx_dt_compat[] = {
-	"brcm,bcm63138",
-	NULL
-};
-
-DT_MACHINE_START(BCM63XXX_DT, "BCM63xx DSL SoC")
-	.dt_compat	= bcm63xx_dt_compat,
-	.l2c_aux_val	= 0,
-	.l2c_aux_mask	= ~0,
-MACHINE_END
diff --git a/arch/arm/mach-bcm/bcm_cygnus.c b/arch/arm/mach-bcm/bcm_cygnus.c
index 7ae894c7849b..2469b66cc59e 100644
--- a/arch/arm/mach-bcm/bcm_cygnus.c
+++ b/arch/arm/mach-bcm/bcm_cygnus.c
@@ -1,15 +1,5 @@
-/*
- * Copyright (C) 2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2014 Broadcom Corporation
 
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-bcm/bcm_hr2.c b/arch/arm/mach-bcm/bcm_hr2.c
index c104f28995d7..a19cc206ec76 100644
--- a/arch/arm/mach-bcm/bcm_hr2.c
+++ b/arch/arm/mach-bcm/bcm_hr2.c
@@ -1,15 +1,5 @@
-/*
- * Copyright (C) 2017 Broadcom
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2017 Broadcom
 
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-bcm/bcm_kona_smc.c b/arch/arm/mach-bcm/bcm_kona_smc.c
index 43829e49ad93..185335843bbd 100644
--- a/arch/arm/mach-bcm/bcm_kona_smc.c
+++ b/arch/arm/mach-bcm/bcm_kona_smc.c
@@ -1,15 +1,5 @@
-/*
- * Copyright (C) 2013 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2013 Broadcom Corporation
 #include <linux/smp.h>
 #include <linux/io.h>
 #include <linux/ioport.h>
@@ -52,6 +42,7 @@ int __init bcm_kona_smc_init(void)
 		return -ENODEV;
 
 	prop_val = of_get_address(node, 0, &prop_size, NULL);
+	of_node_put(node);
 	if (!prop_val)
 		return -EINVAL;
 
diff --git a/arch/arm/mach-bcm/bcm_kona_smc.h b/arch/arm/mach-bcm/bcm_kona_smc.h
index 2e29ec67e414..17f3811fa543 100644
--- a/arch/arm/mach-bcm/bcm_kona_smc.h
+++ b/arch/arm/mach-bcm/bcm_kona_smc.h
@@ -1,15 +1,5 @@
-/*
- * Copyright (C) 2013 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright (C) 2013 Broadcom Corporation */
 
 #ifndef BCM_KONA_SMC_H
 #define BCM_KONA_SMC_H
diff --git a/arch/arm/mach-bcm/bcm_nsp.c b/arch/arm/mach-bcm/bcm_nsp.c
index a1101a3d318e..65ed9f8a518a 100644
--- a/arch/arm/mach-bcm/bcm_nsp.c
+++ b/arch/arm/mach-bcm/bcm_nsp.c
@@ -1,15 +1,5 @@
-/*
- * Copyright (C) 2015 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2015 Broadcom Corporation
 
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-bcm/board_bcm21664.c b/arch/arm/mach-bcm/board_bcm21664.c
index c5bf01641172..9ce9ed092b09 100644
--- a/arch/arm/mach-bcm/board_bcm21664.c
+++ b/arch/arm/mach-bcm/board_bcm21664.c
@@ -1,15 +1,5 @@
-/*
- * Copyright (C) 2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2014 Broadcom Corporation
 
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-bcm/board_bcm23550.c b/arch/arm/mach-bcm/board_bcm23550.c
index 0ac01debd077..dd6e9cb785e0 100644
--- a/arch/arm/mach-bcm/board_bcm23550.c
+++ b/arch/arm/mach-bcm/board_bcm23550.c
@@ -1,15 +1,5 @@
-/*
- * Copyright (C) 2016 Broadcom
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2016 Broadcom
 
 #include <linux/of_platform.h>
 
diff --git a/arch/arm/mach-bcm/board_bcm281xx.c b/arch/arm/mach-bcm/board_bcm281xx.c
index 1238ac801530..91f6d633ee8e 100644
--- a/arch/arm/mach-bcm/board_bcm281xx.c
+++ b/arch/arm/mach-bcm/board_bcm281xx.c
@@ -1,15 +1,5 @@
-/*
- * Copyright (C) 2012-2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2012-2014 Broadcom Corporation
 
 #include <linux/clocksource.h>
 #include <linux/of_address.h>
diff --git a/arch/arm/mach-bcm/brcmstb.c b/arch/arm/mach-bcm/brcmstb.c
index 5f127d5f1045..2e3385ced82a 100644
--- a/arch/arm/mach-bcm/brcmstb.c
+++ b/arch/arm/mach-bcm/brcmstb.c
@@ -1,15 +1,5 @@
-/*
- * Copyright (C) 2013-2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2013-2014 Broadcom Corporation
 
 #include <linux/init.h>
 #include <linux/irqchip.h>
diff --git a/arch/arm/mach-bcm/kona_l2_cache.c b/arch/arm/mach-bcm/kona_l2_cache.c
index 59ad86304092..457c66e1d7ae 100644
--- a/arch/arm/mach-bcm/kona_l2_cache.c
+++ b/arch/arm/mach-bcm/kona_l2_cache.c
@@ -1,15 +1,5 @@
-/*
- * Copyright (C) 2012-2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2012-2014 Broadcom Corporation
 
 
 #include <linux/init.h>
diff --git a/arch/arm/mach-bcm/kona_l2_cache.h b/arch/arm/mach-bcm/kona_l2_cache.h
index 46f84a95ab1c..77c5dc033910 100644
--- a/arch/arm/mach-bcm/kona_l2_cache.h
+++ b/arch/arm/mach-bcm/kona_l2_cache.h
@@ -1,15 +1,5 @@
-/*
- * Copyright (C) 2012-2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright (C) 2012-2014 Broadcom Corporation */
 
 #ifdef CONFIG_ARCH_BCM_MOBILE_L2_CACHE
 void	kona_l2_cache_init(void);
diff --git a/arch/arm/mach-bcm/platsmp-brcmstb.c b/arch/arm/mach-bcm/platsmp-brcmstb.c
index 4555f21e7077..8989299ebdd6 100644
--- a/arch/arm/mach-bcm/platsmp-brcmstb.c
+++ b/arch/arm/mach-bcm/platsmp-brcmstb.c
@@ -1,16 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Broadcom STB CPU SMP and hotplug support for ARM
  *
  * Copyright (C) 2013-2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/delay.h>
@@ -59,7 +51,7 @@ static u32 hif_cont_reg;
 /*
  * We must quiesce a dying CPU before it can be killed by the boot CPU. Because
  * one or more cache may be disabled, we must flush to ensure coherency. We
- * cannot use traditionl completion structures or spinlocks as they rely on
+ * cannot use traditional completion structures or spinlocks as they rely on
  * coherency.
  */
 static DEFINE_PER_CPU_ALIGNED(int, per_cpu_sw_state);
diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig
index 314de9477b84..fd32e576ecd0 100644
--- a/arch/arm/mach-clps711x/Kconfig
+++ b/arch/arm/mach-clps711x/Kconfig
@@ -2,6 +2,7 @@
 menuconfig ARCH_CLPS711X
 	bool "Cirrus Logic EP721x/EP731x-based"
 	depends on ARCH_MULTI_V4T
+	depends on CPU_LITTLE_ENDIAN
 	select CLPS711X_TIMER
 	select CPU_ARM720T
 	select GPIOLIB
diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig
index 1ecf5466931e..1f85deff2486 100644
--- a/arch/arm/mach-cns3xxx/Kconfig
+++ b/arch/arm/mach-cns3xxx/Kconfig
@@ -2,6 +2,7 @@
 menuconfig ARCH_CNS3XXX
 	bool "Cavium Networks CNS3XXX family"
 	depends on ARCH_MULTI_V6
+	depends on ATAGS && UNUSED_BOARD_FILES
 	select ARM_GIC
 	help
 	  Support for Cavium Networks CNS3XXX platform.
diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c
index e4f4b20b83a2..3fc4ec830e3a 100644
--- a/arch/arm/mach-cns3xxx/core.c
+++ b/arch/arm/mach-cns3xxx/core.c
@@ -372,6 +372,7 @@ static void __init cns3xxx_init(void)
 		/* De-Asscer SATA Reset */
 		cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SATA));
 	}
+	of_node_put(dn);
 
 	dn = of_find_compatible_node(NULL, NULL, "cavium,cns3420-sdhci");
 	if (of_device_is_available(dn)) {
@@ -385,6 +386,7 @@ static void __init cns3xxx_init(void)
 		cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SDIO));
 		cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SDIO));
 	}
+	of_node_put(dn);
 
 	pm_power_off = cns3xxx_power_off;
 
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index 1d3aef84287d..c8cbd9a30791 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -3,6 +3,7 @@
 menuconfig ARCH_DAVINCI
 	bool "TI DaVinci"
 	depends on ARCH_MULTI_V5
+	depends on CPU_LITTLE_ENDIAN
 	select DAVINCI_TIMER
 	select ZONE_DMA
 	select PM_GENERIC_DOMAINS if PM
@@ -18,24 +19,16 @@ config ARCH_DAVINCI_DMx
 
 comment "DaVinci Core Type"
 
-config ARCH_DAVINCI_DM644x
-	bool "DaVinci 644x based system"
-	select DAVINCI_AINTC
-	select ARCH_DAVINCI_DMx
-
 config ARCH_DAVINCI_DM355
 	bool "DaVinci 355 based system"
-	select DAVINCI_AINTC
-	select ARCH_DAVINCI_DMx
-
-config ARCH_DAVINCI_DM646x
-	bool "DaVinci 646x based system"
+	depends on ATAGS && UNUSED_BOARD_FILES
 	select DAVINCI_AINTC
 	select ARCH_DAVINCI_DMx
 
 config ARCH_DAVINCI_DA830
 	bool "DA830/OMAP-L137/AM17x based system"
 	depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT)
+	depends on ATAGS
 	select ARCH_DAVINCI_DA8XX
 	# needed on silicon revs 1.0, 1.1:
 	select CPU_DCACHE_WRITETHROUGH if !CPU_DCACHE_DISABLE
@@ -44,6 +37,7 @@ config ARCH_DAVINCI_DA830
 config ARCH_DAVINCI_DA850
 	bool "DA850/OMAP-L138/AM18x based system"
 	depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT)
+	depends on ATAGS
 	select ARCH_DAVINCI_DA8XX
 	select DAVINCI_CP_INTC
 
@@ -52,6 +46,7 @@ config ARCH_DAVINCI_DA8XX
 
 config ARCH_DAVINCI_DM365
 	bool "DaVinci 365 based system"
+	depends on ATAGS && UNUSED_BOARD_FILES
 	select DAVINCI_AINTC
 	select ARCH_DAVINCI_DMx
 
@@ -66,28 +61,6 @@ config MACH_DA8XX_DT
 	  Say y here to include support for TI DaVinci DA850 based using
 	  Flattened Device Tree. More information at Documentation/devicetree
 
-config MACH_DAVINCI_EVM
-	bool "TI DM644x EVM"
-	default ARCH_DAVINCI_DM644x
-	depends on ARCH_DAVINCI_DM644x
-	help
-	  Configure this option to specify the whether the board used
-	  for development is a DM644x EVM
-
-config MACH_SFFSDR
-	bool "Lyrtech SFFSDR"
-	depends on ARCH_DAVINCI_DM644x
-	help
-	  Say Y here to select the Lyrtech Small Form Factor
-	  Software Defined Radio (SFFSDR) board.
-
-config MACH_NEUROS_OSD2
-	bool "Neuros OSD2 Open Television Set Top Box"
-	depends on ARCH_DAVINCI_DM644x
-	help
-	  Configure this option to specify the whether the board used
-	  for development is a Neuros OSD2 Open Set Top Box.
-
 config MACH_DAVINCI_DM355_EVM
 	bool "TI DM355 EVM"
 	default ARCH_DAVINCI_DM355
@@ -103,18 +76,6 @@ config MACH_DM355_LEOPARD
 	  Configure this option to specify the whether the board used
 	  for development is a DM355 Leopard board.
 
-config MACH_DAVINCI_DM6467_EVM
-	bool "TI DM6467 EVM"
-	default ARCH_DAVINCI_DM646x
-	depends on ARCH_DAVINCI_DM646x
-	select MACH_DAVINCI_DM6467TEVM
-	help
-	  Configure this option to specify the whether the board used
-	  for development is a DM6467 EVM
-
-config MACH_DAVINCI_DM6467TEVM
-	bool
-
 config MACH_DAVINCI_DM365_EVM
 	bool "TI DM365 EVM"
 	default ARCH_DAVINCI_DM365
@@ -126,6 +87,7 @@ config MACH_DAVINCI_DM365_EVM
 config MACH_DAVINCI_DA830_EVM
 	bool "TI DA830/OMAP-L137/AM17x Reference Platform"
 	default ARCH_DAVINCI_DA830
+	depends on ATAGS && UNUSED_BOARD_FILES
 	depends on ARCH_DAVINCI_DA830
 	select GPIO_PCF857X if I2C
 	help
@@ -155,6 +117,7 @@ endchoice
 
 config MACH_DAVINCI_DA850_EVM
 	bool "TI DA850/OMAP-L138/AM18x Reference Platform"
+	depends on ATAGS && UNUSED_BOARD_FILES
 	default ARCH_DAVINCI_DA850
 	depends on ARCH_DAVINCI_DA850
 	help
@@ -196,6 +159,7 @@ endchoice
 config MACH_MITYOMAPL138
 	bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
 	depends on ARCH_DAVINCI_DA850
+	depends on ATAGS && UNUSED_BOARD_FILES
 	help
 	  Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
 	  System on Module.  Information on this SoM may be found at
@@ -204,6 +168,7 @@ config MACH_MITYOMAPL138
 config MACH_OMAPL138_HAWKBOARD
 	bool "TI AM1808 / OMAPL-138 Hawkboard platform"
 	depends on ARCH_DAVINCI_DA850
+	depends on ATAGS && UNUSED_BOARD_FILES
 	help
 	  Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform .
 
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 58838a9de651..3f4894aa7528 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -3,30 +3,22 @@
 # Makefile for the linux kernel.
 #
 #
-
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
-
+#
 # Common objects
 obj-y 					:= serial.o usb.o common.o sram.o
 
 obj-$(CONFIG_DAVINCI_MUX)		+= mux.o
 
 # Chip specific
-obj-$(CONFIG_ARCH_DAVINCI_DM644x)       += dm644x.o devices.o
 obj-$(CONFIG_ARCH_DAVINCI_DM355)        += dm355.o devices.o
-obj-$(CONFIG_ARCH_DAVINCI_DM646x)       += dm646x.o devices.o
 obj-$(CONFIG_ARCH_DAVINCI_DM365)	+= dm365.o devices.o
 obj-$(CONFIG_ARCH_DAVINCI_DA830)	+= da830.o devices-da8xx.o usb-da8xx.o
 obj-$(CONFIG_ARCH_DAVINCI_DA850)	+= da850.o devices-da8xx.o usb-da8xx.o
 
 # Board specific
 obj-$(CONFIG_MACH_DA8XX_DT)		+= da8xx-dt.o pdata-quirks.o
-obj-$(CONFIG_MACH_DAVINCI_EVM)  	+= board-dm644x-evm.o
-obj-$(CONFIG_MACH_SFFSDR)		+= board-sffsdr.o
-obj-$(CONFIG_MACH_NEUROS_OSD2)		+= board-neuros-osd2.o
 obj-$(CONFIG_MACH_DAVINCI_DM355_EVM)	+= board-dm355-evm.o
 obj-$(CONFIG_MACH_DM355_LEOPARD)	+= board-dm355-leopard.o
-obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM)	+= board-dm646x-evm.o
 obj-$(CONFIG_MACH_DAVINCI_DM365_EVM)	+= board-dm365-evm.o
 obj-$(CONFIG_MACH_DAVINCI_DA830_EVM)	+= board-da830-evm.o
 obj-$(CONFIG_MACH_DAVINCI_DA850_EVM)	+= board-da850-evm.o
diff --git a/arch/arm/mach-davinci/Makefile.boot b/arch/arm/mach-davinci/Makefile.boot
deleted file mode 100644
index d36b251f325b..000000000000
--- a/arch/arm/mach-davinci/Makefile.boot
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-zreladdr-$(CONFIG_ARCH_DAVINCI_DA8XX)		+= 0xc0008000
-params_phys-$(CONFIG_ARCH_DAVINCI_DA8XX)	:= 0xc0000100
-initrd_phys-$(CONFIG_ARCH_DAVINCI_DA8XX)	:= 0xc0800000
-
-zreladdr-$(CONFIG_ARCH_DAVINCI_DMx)		+= 0x80008000
-params_phys-$(CONFIG_ARCH_DAVINCI_DMx)		:= 0x80000100
-initrd_phys-$(CONFIG_ARCH_DAVINCI_DMx)		:= 0x80800000
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 823c9cc98f18..6299e5c8f4ea 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -1,13 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * TI DA830/OMAP L137 EVM board
  *
  * Author: Mark A. Greer <mgreer@mvista.com>
  * Derived from: arch/arm/mach-davinci/board-dm644x-evm.c
  *
- * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
+ * 2007, 2009 (c) MontaVista Software, Inc.
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -36,10 +34,9 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/common.h>
-#include <mach/mux.h>
-#include <mach/da8xx.h>
-
+#include "common.h"
+#include "mux.h"
+#include "da8xx.h"
 #include "irqs.h"
 
 #define DA830_EVM_PHY_ID		""
@@ -473,11 +470,10 @@ static int __init da830_evm_ui_expander_setup(struct i2c_client *client,
 	return 0;
 }
 
-static int da830_evm_ui_expander_teardown(struct i2c_client *client, int gpio,
+static void da830_evm_ui_expander_teardown(struct i2c_client *client, int gpio,
 		unsigned ngpio, void *context)
 {
 	gpio_free(gpio + 6);
-	return 0;
 }
 
 static struct pcf857x_platform_data __initdata da830_evm_ui_expander_info = {
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 428012687a80..d752ee2b30ff 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * TI DA850/OMAP-L138 EVM board
  *
@@ -6,10 +7,7 @@
  * Derived from: arch/arm/mach-davinci/board-da830-evm.c
  * Original Copyrights follow:
  *
- * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
+ * 2007, 2009 (c) MontaVista Software, Inc.
  */
 #include <linux/console.h>
 #include <linux/delay.h>
@@ -43,10 +41,9 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 
-#include <mach/common.h>
-#include <mach/da8xx.h>
-#include <mach/mux.h>
-
+#include "common.h"
+#include "da8xx.h"
+#include "mux.h"
 #include "irqs.h"
 #include "sram.h"
 
@@ -519,8 +516,8 @@ exp_setup_sela_fail:
 	return ret;
 }
 
-static int da850_evm_ui_expander_teardown(struct i2c_client *client,
-					unsigned gpio, unsigned ngpio, void *c)
+static void da850_evm_ui_expander_teardown(struct i2c_client *client,
+					   unsigned gpio, unsigned ngpio, void *c)
 {
 	platform_device_unregister(&da850_evm_ui_keys_device);
 
@@ -532,8 +529,6 @@ static int da850_evm_ui_expander_teardown(struct i2c_client *client,
 	gpio_free(gpio + DA850_EVM_UI_EXP_SEL_C);
 	gpio_free(gpio + DA850_EVM_UI_EXP_SEL_B);
 	gpio_free(gpio + DA850_EVM_UI_EXP_SEL_A);
-
-	return 0;
 }
 
 /* assign the baseboard expander's GPIOs after the UI board's */
@@ -700,13 +695,11 @@ io_exp_setup_sw_fail:
 	return ret;
 }
 
-static int da850_evm_bb_expander_teardown(struct i2c_client *client,
-					unsigned gpio, unsigned ngpio, void *c)
+static void da850_evm_bb_expander_teardown(struct i2c_client *client,
+					   unsigned gpio, unsigned ngpio, void *c)
 {
 	platform_device_unregister(&da850_evm_bb_leds_device);
 	platform_device_unregister(&da850_evm_bb_keys_device);
-
-	return 0;
 }
 
 static struct pca953x_platform_data da850_evm_ui_expander_info = {
@@ -1101,11 +1094,13 @@ static int __init da850_evm_config_emac(void)
 	int ret;
 	u32 val;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	u8 rmii_en = soc_info->emac_pdata->rmii_en;
+	u8 rmii_en;
 
 	if (!machine_is_davinci_da850_evm())
 		return 0;
 
+	rmii_en = soc_info->emac_pdata->rmii_en;
+
 	cfg_chip3_base = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);
 
 	val = __raw_readl(cfg_chip3_base);
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 3c5a9e3c128a..b48ab1c3e48b 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -1,12 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * TI DaVinci EVM board support
  *
  * Author: Kevin Hilman, Deep Root Systems, LLC
  *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
+ * 2007 (c) MontaVista Software, Inc.
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -33,9 +31,8 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/serial.h>
-#include <mach/common.h>
-
+#include "serial.h"
+#include "common.h"
 #include "davinci.h"
 
 /* NOTE:  this is geared for the standard config, with a socketed
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index e475b2113e70..32b9d607d025 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * DM355 leopard board support
  *
  * Based on board-dm355-evm.c
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -27,9 +24,8 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/common.h>
-#include <mach/serial.h>
-
+#include "common.h"
+#include "serial.h"
 #include "davinci.h"
 
 /* NOTE:  this is geared for the standard config, with a socketed
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index b3bef74c982a..d8c6c360818b 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -1,16 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * TI DaVinci DM365 EVM board support
  *
  * Copyright (C) 2009 Texas Instruments Incorporated
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -36,10 +28,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/mux.h>
-#include <mach/common.h>
 #include <linux/platform_data/i2c-davinci.h>
-#include <mach/serial.h>
 #include <linux/platform_data/mmc-davinci.h>
 #include <linux/platform_data/mtd-davinci.h>
 #include <linux/platform_data/keyscan-davinci.h>
@@ -47,6 +36,9 @@
 #include <media/i2c/ths7303.h>
 #include <media/i2c/tvp514x.h>
 
+#include "mux.h"
+#include "common.h"
+#include "serial.h"
 #include "davinci.h"
 
 static inline int have_imager(void)
@@ -861,4 +853,3 @@ MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
 	.init_late	= davinci_init_late,
 	.dma_zone_size	= SZ_128M,
 MACHINE_END
-
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
deleted file mode 100644
index cce3a621eb20..000000000000
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ /dev/null
@@ -1,932 +0,0 @@
-/*
- * TI DaVinci EVM board support
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/pcf857x.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/property.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/nvmem-provider.h>
-#include <linux/phy.h>
-#include <linux/clk.h>
-#include <linux/videodev2.h>
-#include <linux/v4l2-dv-timings.h>
-#include <linux/export.h>
-#include <linux/leds.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-
-#include <media/i2c/tvp514x.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/common.h>
-#include <mach/mux.h>
-#include <mach/serial.h>
-
-#include <linux/platform_data/i2c-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/usb-davinci.h>
-#include <linux/platform_data/mtd-davinci-aemif.h>
-#include <linux/platform_data/ti-aemif.h>
-
-#include "davinci.h"
-#include "irqs.h"
-
-#define DM644X_EVM_PHY_ID		"davinci_mdio-0:01"
-#define LXT971_PHY_ID	(0x001378e2)
-#define LXT971_PHY_MASK	(0xfffffff0)
-
-static struct mtd_partition davinci_evm_norflash_partitions[] = {
-	/* bootloader (UBL, U-Boot, etc) in first 5 sectors */
-	{
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= 5 * SZ_64K,
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-	/* bootloader params in the next 1 sectors */
-	{
-		.name		= "params",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_64K,
-		.mask_flags	= 0,
-	},
-	/* kernel */
-	{
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_2M,
-		.mask_flags	= 0
-	},
-	/* file system */
-	{
-		.name		= "filesystem",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0
-	}
-};
-
-static struct physmap_flash_data davinci_evm_norflash_data = {
-	.width		= 2,
-	.parts		= davinci_evm_norflash_partitions,
-	.nr_parts	= ARRAY_SIZE(davinci_evm_norflash_partitions),
-};
-
-/* NOTE: CFI probe will correctly detect flash part as 32M, but EMIF
- * limits addresses to 16M, so using addresses past 16M will wrap */
-static struct resource davinci_evm_norflash_resource = {
-	.start		= DM644X_ASYNC_EMIF_DATA_CE0_BASE,
-	.end		= DM644X_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device davinci_evm_norflash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &davinci_evm_norflash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &davinci_evm_norflash_resource,
-};
-
-/* DM644x EVM includes a 64 MByte small-page NAND flash (16K blocks).
- * It may used instead of the (default) NOR chip to boot, using TI's
- * tools to install the secondary boot loader (UBL) and U-Boot.
- */
-static struct mtd_partition davinci_evm_nandflash_partition[] = {
-	/* Bootloader layout depends on whose u-boot is installed, but we
-	 * can hide all the details.
-	 *  - block 0 for u-boot environment ... in mainline u-boot
-	 *  - block 1 for UBL (plus up to four backup copies in blocks 2..5)
-	 *  - blocks 6...? for u-boot
-	 *  - blocks 16..23 for u-boot environment ... in TI's u-boot
-	 */
-	{
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= SZ_256K + SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	/* Kernel */
-	{
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_4M,
-		.mask_flags	= 0,
-	},
-	/* File system (older GIT kernels started this on the 5MB mark) */
-	{
-		.name		= "filesystem",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	}
-	/* A few blocks at end hold a flash BBT ... created by TI's CCS
-	 * using flashwriter_nand.out, but ignored by TI's versions of
-	 * Linux and u-boot.  We boot faster by using them.
-	 */
-};
-
-static struct davinci_aemif_timing davinci_evm_nandflash_timing = {
-	.wsetup		= 20,
-	.wstrobe	= 40,
-	.whold		= 20,
-	.rsetup		= 10,
-	.rstrobe	= 40,
-	.rhold		= 10,
-	.ta		= 40,
-};
-
-static struct davinci_nand_pdata davinci_evm_nandflash_data = {
-	.core_chipsel	= 0,
-	.parts		= davinci_evm_nandflash_partition,
-	.nr_parts	= ARRAY_SIZE(davinci_evm_nandflash_partition),
-	.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST,
-	.ecc_bits	= 1,
-	.bbt_options	= NAND_BBT_USE_FLASH,
-	.timing		= &davinci_evm_nandflash_timing,
-};
-
-static struct resource davinci_evm_nandflash_resource[] = {
-	{
-		.start		= DM644X_ASYNC_EMIF_DATA_CE0_BASE,
-		.end		= DM644X_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= DM644X_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DM644X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct resource davinci_evm_aemif_resource[] = {
-	{
-		.start		= DM644X_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DM644X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct aemif_abus_data davinci_evm_aemif_abus_data[] = {
-	{
-		.cs		= 1,
-	},
-};
-
-static struct platform_device davinci_evm_nandflash_devices[] = {
-	{
-		.name		= "davinci_nand",
-		.id		= 0,
-		.dev		= {
-			.platform_data	= &davinci_evm_nandflash_data,
-		},
-		.num_resources	= ARRAY_SIZE(davinci_evm_nandflash_resource),
-		.resource	= davinci_evm_nandflash_resource,
-	},
-};
-
-static struct aemif_platform_data davinci_evm_aemif_pdata = {
-	.abus_data = davinci_evm_aemif_abus_data,
-	.num_abus_data = ARRAY_SIZE(davinci_evm_aemif_abus_data),
-	.sub_devices = davinci_evm_nandflash_devices,
-	.num_sub_devices = ARRAY_SIZE(davinci_evm_nandflash_devices),
-};
-
-static struct platform_device davinci_evm_aemif_device = {
-	.name			= "ti-aemif",
-	.id			= -1,
-	.dev = {
-		.platform_data	= &davinci_evm_aemif_pdata,
-	},
-	.resource		= davinci_evm_aemif_resource,
-	.num_resources		= ARRAY_SIZE(davinci_evm_aemif_resource),
-};
-
-static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device davinci_fb_device = {
-	.name		= "davincifb",
-	.id		= -1,
-	.dev = {
-		.dma_mask		= &davinci_fb_dma_mask,
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-	},
-	.num_resources = 0,
-};
-
-static struct tvp514x_platform_data dm644xevm_tvp5146_pdata = {
-	.clk_polarity = 0,
-	.hs_polarity = 1,
-	.vs_polarity = 1
-};
-
-#define TVP514X_STD_ALL	(V4L2_STD_NTSC | V4L2_STD_PAL)
-/* Inputs available at the TVP5146 */
-static struct v4l2_input dm644xevm_tvp5146_inputs[] = {
-	{
-		.index = 0,
-		.name = "Composite",
-		.type = V4L2_INPUT_TYPE_CAMERA,
-		.std = TVP514X_STD_ALL,
-	},
-	{
-		.index = 1,
-		.name = "S-Video",
-		.type = V4L2_INPUT_TYPE_CAMERA,
-		.std = TVP514X_STD_ALL,
-	},
-};
-
-/*
- * this is the route info for connecting each input to decoder
- * ouput that goes to vpfe. There is a one to one correspondence
- * with tvp5146_inputs
- */
-static struct vpfe_route dm644xevm_tvp5146_routes[] = {
-	{
-		.input = INPUT_CVBS_VI2B,
-		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
-	},
-	{
-		.input = INPUT_SVIDEO_VI2C_VI1C,
-		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
-	},
-};
-
-static struct vpfe_subdev_info dm644xevm_vpfe_sub_devs[] = {
-	{
-		.name = "tvp5146",
-		.grp_id = 0,
-		.num_inputs = ARRAY_SIZE(dm644xevm_tvp5146_inputs),
-		.inputs = dm644xevm_tvp5146_inputs,
-		.routes = dm644xevm_tvp5146_routes,
-		.can_route = 1,
-		.ccdc_if_params = {
-			.if_type = VPFE_BT656,
-			.hdpol = VPFE_PINPOL_POSITIVE,
-			.vdpol = VPFE_PINPOL_POSITIVE,
-		},
-		.board_info = {
-			I2C_BOARD_INFO("tvp5146", 0x5d),
-			.platform_data = &dm644xevm_tvp5146_pdata,
-		},
-	},
-};
-
-static struct vpfe_config dm644xevm_capture_cfg = {
-	.num_subdevs = ARRAY_SIZE(dm644xevm_vpfe_sub_devs),
-	.i2c_adapter_id = 1,
-	.sub_devs = dm644xevm_vpfe_sub_devs,
-	.card_name = "DM6446 EVM",
-	.ccdc = "DM6446 CCDC",
-};
-
-static struct platform_device rtc_dev = {
-	.name           = "rtc_davinci_evm",
-	.id             = -1,
-};
-
-/*----------------------------------------------------------------------*/
-#ifdef CONFIG_I2C
-/*
- * I2C GPIO expanders
- */
-
-#define PCF_Uxx_BASE(x)	(DAVINCI_N_GPIO + ((x) * 8))
-
-
-/* U2 -- LEDs */
-
-static struct gpio_led evm_leds[] = {
-	{ .name = "DS8", .active_low = 1,
-		.default_trigger = "heartbeat", },
-	{ .name = "DS7", .active_low = 1, },
-	{ .name = "DS6", .active_low = 1, },
-	{ .name = "DS5", .active_low = 1, },
-	{ .name = "DS4", .active_low = 1, },
-	{ .name = "DS3", .active_low = 1, },
-	{ .name = "DS2", .active_low = 1,
-		.default_trigger = "mmc0", },
-	{ .name = "DS1", .active_low = 1,
-		.default_trigger = "disk-activity", },
-};
-
-static const struct gpio_led_platform_data evm_led_data = {
-	.num_leds	= ARRAY_SIZE(evm_leds),
-	.leds		= evm_leds,
-};
-
-static struct platform_device *evm_led_dev;
-
-static int
-evm_led_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
-{
-	struct gpio_led *leds = evm_leds;
-	int status;
-
-	while (ngpio--) {
-		leds->gpio = gpio++;
-		leds++;
-	}
-
-	/* what an extremely annoying way to be forced to handle
-	 * device unregistration ...
-	 */
-	evm_led_dev = platform_device_alloc("leds-gpio", 0);
-	platform_device_add_data(evm_led_dev,
-			&evm_led_data, sizeof evm_led_data);
-
-	evm_led_dev->dev.parent = &client->dev;
-	status = platform_device_add(evm_led_dev);
-	if (status < 0) {
-		platform_device_put(evm_led_dev);
-		evm_led_dev = NULL;
-	}
-	return status;
-}
-
-static int
-evm_led_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
-{
-	if (evm_led_dev) {
-		platform_device_unregister(evm_led_dev);
-		evm_led_dev = NULL;
-	}
-	return 0;
-}
-
-static struct pcf857x_platform_data pcf_data_u2 = {
-	.gpio_base	= PCF_Uxx_BASE(0),
-	.setup		= evm_led_setup,
-	.teardown	= evm_led_teardown,
-};
-
-
-/* U18 - A/V clock generator and user switch */
-
-static int sw_gpio;
-
-static ssize_t
-sw_show(struct device *d, struct device_attribute *a, char *buf)
-{
-	char *s = gpio_get_value_cansleep(sw_gpio) ? "on\n" : "off\n";
-
-	strcpy(buf, s);
-	return strlen(s);
-}
-
-static DEVICE_ATTR(user_sw, S_IRUGO, sw_show, NULL);
-
-static int
-evm_u18_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
-{
-	int	status;
-
-	/* export dip switch option */
-	sw_gpio = gpio + 7;
-	status = gpio_request(sw_gpio, "user_sw");
-	if (status == 0)
-		status = gpio_direction_input(sw_gpio);
-	if (status == 0)
-		status = device_create_file(&client->dev, &dev_attr_user_sw);
-	else
-		gpio_free(sw_gpio);
-	if (status != 0)
-		sw_gpio = -EINVAL;
-
-	/* audio PLL:  48 kHz (vs 44.1 or 32), single rate (vs double) */
-	gpio_request(gpio + 3, "pll_fs2");
-	gpio_direction_output(gpio + 3, 0);
-
-	gpio_request(gpio + 2, "pll_fs1");
-	gpio_direction_output(gpio + 2, 0);
-
-	gpio_request(gpio + 1, "pll_sr");
-	gpio_direction_output(gpio + 1, 0);
-
-	return 0;
-}
-
-static int
-evm_u18_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
-{
-	gpio_free(gpio + 1);
-	gpio_free(gpio + 2);
-	gpio_free(gpio + 3);
-
-	if (sw_gpio > 0) {
-		device_remove_file(&client->dev, &dev_attr_user_sw);
-		gpio_free(sw_gpio);
-	}
-	return 0;
-}
-
-static struct pcf857x_platform_data pcf_data_u18 = {
-	.gpio_base	= PCF_Uxx_BASE(1),
-	.n_latch	= (1 << 3) | (1 << 2) | (1 << 1),
-	.setup		= evm_u18_setup,
-	.teardown	= evm_u18_teardown,
-};
-
-
-/* U35 - various I/O signals used to manage USB, CF, ATA, etc */
-
-static int
-evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
-{
-	/* p0 = nDRV_VBUS (initial:  don't supply it) */
-	gpio_request(gpio + 0, "nDRV_VBUS");
-	gpio_direction_output(gpio + 0, 1);
-
-	/* p1 = VDDIMX_EN */
-	gpio_request(gpio + 1, "VDDIMX_EN");
-	gpio_direction_output(gpio + 1, 1);
-
-	/* p2 = VLYNQ_EN */
-	gpio_request(gpio + 2, "VLYNQ_EN");
-	gpio_direction_output(gpio + 2, 1);
-
-	/* p3 = n3V3_CF_RESET (initial: stay in reset) */
-	gpio_request(gpio + 3, "nCF_RESET");
-	gpio_direction_output(gpio + 3, 0);
-
-	/* (p4 unused) */
-
-	/* p5 = 1V8_WLAN_RESET (initial: stay in reset) */
-	gpio_request(gpio + 5, "WLAN_RESET");
-	gpio_direction_output(gpio + 5, 1);
-
-	/* p6 = nATA_SEL (initial: select) */
-	gpio_request(gpio + 6, "nATA_SEL");
-	gpio_direction_output(gpio + 6, 0);
-
-	/* p7 = nCF_SEL (initial: deselect) */
-	gpio_request(gpio + 7, "nCF_SEL");
-	gpio_direction_output(gpio + 7, 1);
-
-	return 0;
-}
-
-static int
-evm_u35_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
-{
-	gpio_free(gpio + 7);
-	gpio_free(gpio + 6);
-	gpio_free(gpio + 5);
-	gpio_free(gpio + 3);
-	gpio_free(gpio + 2);
-	gpio_free(gpio + 1);
-	gpio_free(gpio + 0);
-	return 0;
-}
-
-static struct pcf857x_platform_data pcf_data_u35 = {
-	.gpio_base	= PCF_Uxx_BASE(2),
-	.setup		= evm_u35_setup,
-	.teardown	= evm_u35_teardown,
-};
-
-/*----------------------------------------------------------------------*/
-
-/* Most of this EEPROM is unused, but U-Boot uses some data:
- *  - 0x7f00, 6 bytes Ethernet Address
- *  - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL)
- *  - ... newer boards may have more
- */
-
-static struct nvmem_cell_info dm644evm_nvmem_cells[] = {
-	{
-		.name		= "macaddr",
-		.offset		= 0x7f00,
-		.bytes		= ETH_ALEN,
-	}
-};
-
-static struct nvmem_cell_table dm644evm_nvmem_cell_table = {
-	.nvmem_name	= "1-00500",
-	.cells		= dm644evm_nvmem_cells,
-	.ncells		= ARRAY_SIZE(dm644evm_nvmem_cells),
-};
-
-static struct nvmem_cell_lookup dm644evm_nvmem_cell_lookup = {
-	.nvmem_name	= "1-00500",
-	.cell_name	= "macaddr",
-	.dev_id		= "davinci_emac.1",
-	.con_id		= "mac-address",
-};
-
-static const struct property_entry eeprom_properties[] = {
-	PROPERTY_ENTRY_U32("pagesize", 64),
-	{ }
-};
-
-static const struct software_node eeprom_node = {
-	.properties = eeprom_properties,
-};
-
-/*
- * MSP430 supports RTC, card detection, input from IR remote, and
- * a bit more.  It triggers interrupts on GPIO(7) from pressing
- * buttons on the IR remote, and for card detect switches.
- */
-static struct i2c_client *dm6446evm_msp;
-
-static int dm6446evm_msp_probe(struct i2c_client *client)
-{
-	dm6446evm_msp = client;
-	return 0;
-}
-
-static int dm6446evm_msp_remove(struct i2c_client *client)
-{
-	dm6446evm_msp = NULL;
-	return 0;
-}
-
-static const struct i2c_device_id dm6446evm_msp_ids[] = {
-	{ "dm6446evm_msp", 0, },
-	{ /* end of list */ },
-};
-
-static struct i2c_driver dm6446evm_msp_driver = {
-	.driver.name	= "dm6446evm_msp",
-	.id_table	= dm6446evm_msp_ids,
-	.probe_new	= dm6446evm_msp_probe,
-	.remove		= dm6446evm_msp_remove,
-};
-
-static int dm6444evm_msp430_get_pins(void)
-{
-	static const char txbuf[2] = { 2, 4, };
-	char buf[4];
-	struct i2c_msg msg[2] = {
-		{
-			.flags = 0,
-			.len = 2,
-			.buf = (void __force *)txbuf,
-		},
-		{
-			.flags = I2C_M_RD,
-			.len = 4,
-			.buf = buf,
-		},
-	};
-	int status;
-
-	if (!dm6446evm_msp)
-		return -ENXIO;
-
-	msg[0].addr = dm6446evm_msp->addr;
-	msg[1].addr = dm6446evm_msp->addr;
-
-	/* Command 4 == get input state, returns port 2 and port3 data
-	 *   S Addr W [A] len=2 [A] cmd=4 [A]
-	 *   RS Addr R [A] [len=4] A [cmd=4] A [port2] A [port3] N P
-	 */
-	status = i2c_transfer(dm6446evm_msp->adapter, msg, 2);
-	if (status < 0)
-		return status;
-
-	dev_dbg(&dm6446evm_msp->dev, "PINS: %4ph\n", buf);
-
-	return (buf[3] << 8) | buf[2];
-}
-
-static int dm6444evm_mmc_get_cd(int module)
-{
-	int status = dm6444evm_msp430_get_pins();
-
-	return (status < 0) ? status : !(status & BIT(1));
-}
-
-static int dm6444evm_mmc_get_ro(int module)
-{
-	int status = dm6444evm_msp430_get_pins();
-
-	return (status < 0) ? status : status & BIT(6 + 8);
-}
-
-static struct davinci_mmc_config dm6446evm_mmc_config = {
-	.get_cd		= dm6444evm_mmc_get_cd,
-	.get_ro		= dm6444evm_mmc_get_ro,
-	.wires		= 4,
-};
-
-static struct i2c_board_info __initdata i2c_info[] =  {
-	{
-		I2C_BOARD_INFO("dm6446evm_msp", 0x23),
-	},
-	{
-		I2C_BOARD_INFO("pcf8574", 0x38),
-		.platform_data	= &pcf_data_u2,
-	},
-	{
-		I2C_BOARD_INFO("pcf8574", 0x39),
-		.platform_data	= &pcf_data_u18,
-	},
-	{
-		I2C_BOARD_INFO("pcf8574", 0x3a),
-		.platform_data	= &pcf_data_u35,
-	},
-	{
-		I2C_BOARD_INFO("24c256", 0x50),
-		.swnode = &eeprom_node,
-	},
-	{
-		I2C_BOARD_INFO("tlv320aic33", 0x1b),
-	},
-};
-
-#define DM644X_I2C_SDA_PIN	GPIO_TO_PIN(2, 12)
-#define DM644X_I2C_SCL_PIN	GPIO_TO_PIN(2, 11)
-
-static struct gpiod_lookup_table i2c_recovery_gpiod_table = {
-	.dev_id = "i2c_davinci.1",
-	.table = {
-		GPIO_LOOKUP("davinci_gpio", DM644X_I2C_SDA_PIN, "sda",
-			    GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-		GPIO_LOOKUP("davinci_gpio", DM644X_I2C_SCL_PIN, "scl",
-			    GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-		{ }
-	},
-};
-
-/* The msp430 uses a slow bitbanged I2C implementation (ergo 20 KHz),
- * which requires 100 usec of idle bus after i2c writes sent to it.
- */
-static struct davinci_i2c_platform_data i2c_pdata = {
-	.bus_freq	= 20 /* kHz */,
-	.bus_delay	= 100 /* usec */,
-	.gpio_recovery	= true,
-};
-
-static void __init evm_init_i2c(void)
-{
-	gpiod_add_lookup_table(&i2c_recovery_gpiod_table);
-	davinci_init_i2c(&i2c_pdata);
-	i2c_add_driver(&dm6446evm_msp_driver);
-	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
-}
-#endif
-
-/* Fixed regulator support */
-static struct regulator_consumer_supply fixed_supplies_3_3v[] = {
-	/* Baseboard 3.3V: 5V -> TPS54310PWP -> 3.3V */
-	REGULATOR_SUPPLY("AVDD", "1-001b"),
-	REGULATOR_SUPPLY("DRVDD", "1-001b"),
-};
-
-static struct regulator_consumer_supply fixed_supplies_1_8v[] = {
-	/* Baseboard 1.8V: 5V -> TPS54310PWP -> 1.8V */
-	REGULATOR_SUPPLY("IOVDD", "1-001b"),
-	REGULATOR_SUPPLY("DVDD", "1-001b"),
-};
-
-#define VENC_STD_ALL	(V4L2_STD_NTSC | V4L2_STD_PAL)
-
-/* venc standard timings */
-static struct vpbe_enc_mode_info dm644xevm_enc_std_timing[] = {
-	{
-		.name		= "ntsc",
-		.timings_type	= VPBE_ENC_STD,
-		.std_id		= V4L2_STD_NTSC,
-		.interlaced	= 1,
-		.xres		= 720,
-		.yres		= 480,
-		.aspect		= {11, 10},
-		.fps		= {30000, 1001},
-		.left_margin	= 0x79,
-		.upper_margin	= 0x10,
-	},
-	{
-		.name		= "pal",
-		.timings_type	= VPBE_ENC_STD,
-		.std_id		= V4L2_STD_PAL,
-		.interlaced	= 1,
-		.xres		= 720,
-		.yres		= 576,
-		.aspect		= {54, 59},
-		.fps		= {25, 1},
-		.left_margin	= 0x7e,
-		.upper_margin	= 0x16,
-	},
-};
-
-/* venc dv preset timings */
-static struct vpbe_enc_mode_info dm644xevm_enc_preset_timing[] = {
-	{
-		.name		= "480p59_94",
-		.timings_type	= VPBE_ENC_DV_TIMINGS,
-		.dv_timings	= V4L2_DV_BT_CEA_720X480P59_94,
-		.interlaced	= 0,
-		.xres		= 720,
-		.yres		= 480,
-		.aspect		= {1, 1},
-		.fps		= {5994, 100},
-		.left_margin	= 0x80,
-		.upper_margin	= 0x20,
-	},
-	{
-		.name		= "576p50",
-		.timings_type	= VPBE_ENC_DV_TIMINGS,
-		.dv_timings	= V4L2_DV_BT_CEA_720X576P50,
-		.interlaced	= 0,
-		.xres		= 720,
-		.yres		= 576,
-		.aspect		= {1, 1},
-		.fps		= {50, 1},
-		.left_margin	= 0x7e,
-		.upper_margin	= 0x30,
-	},
-};
-
-/*
- * The outputs available from VPBE + encoders. Keep the order same
- * as that of encoders. First those from venc followed by that from
- * encoders. Index in the output refers to index on a particular encoder.
- * Driver uses this index to pass it to encoder when it supports more
- * than one output. Userspace applications use index of the array to
- * set an output.
- */
-static struct vpbe_output dm644xevm_vpbe_outputs[] = {
-	{
-		.output		= {
-			.index		= 0,
-			.name		= "Composite",
-			.type		= V4L2_OUTPUT_TYPE_ANALOG,
-			.std		= VENC_STD_ALL,
-			.capabilities	= V4L2_OUT_CAP_STD,
-		},
-		.subdev_name	= DM644X_VPBE_VENC_SUBDEV_NAME,
-		.default_mode	= "ntsc",
-		.num_modes	= ARRAY_SIZE(dm644xevm_enc_std_timing),
-		.modes		= dm644xevm_enc_std_timing,
-	},
-	{
-		.output		= {
-			.index		= 1,
-			.name		= "Component",
-			.type		= V4L2_OUTPUT_TYPE_ANALOG,
-			.capabilities	= V4L2_OUT_CAP_DV_TIMINGS,
-		},
-		.subdev_name	= DM644X_VPBE_VENC_SUBDEV_NAME,
-		.default_mode	= "480p59_94",
-		.num_modes	= ARRAY_SIZE(dm644xevm_enc_preset_timing),
-		.modes		= dm644xevm_enc_preset_timing,
-	},
-};
-
-static struct vpbe_config dm644xevm_display_cfg = {
-	.module_name	= "dm644x-vpbe-display",
-	.i2c_adapter_id	= 1,
-	.osd		= {
-		.module_name	= DM644X_VPBE_OSD_SUBDEV_NAME,
-	},
-	.venc		= {
-		.module_name	= DM644X_VPBE_VENC_SUBDEV_NAME,
-	},
-	.num_outputs	= ARRAY_SIZE(dm644xevm_vpbe_outputs),
-	.outputs	= dm644xevm_vpbe_outputs,
-};
-
-static struct platform_device *davinci_evm_devices[] __initdata = {
-	&davinci_fb_device,
-	&rtc_dev,
-};
-
-static void __init
-davinci_evm_map_io(void)
-{
-	dm644x_init();
-}
-
-static int davinci_phy_fixup(struct phy_device *phydev)
-{
-	unsigned int control;
-	/* CRITICAL: Fix for increasing PHY signal drive strength for
-	 * TX lockup issue. On DaVinci EVM, the Intel LXT971 PHY
-	 * signal strength was low causing  TX to fail randomly. The
-	 * fix is to Set bit 11 (Increased MII drive strength) of PHY
-	 * register 26 (Digital Config register) on this phy. */
-	control = phy_read(phydev, 26);
-	phy_write(phydev, 26, (control | 0x800));
-	return 0;
-}
-
-#define HAS_ATA		(IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
-			 IS_ENABLED(CONFIG_PATA_BK3710))
-
-#define HAS_NOR		IS_ENABLED(CONFIG_MTD_PHYSMAP)
-
-#define HAS_NAND	IS_ENABLED(CONFIG_MTD_NAND_DAVINCI)
-
-#define GPIO_nVBUS_DRV		160
-
-static struct gpiod_lookup_table dm644evm_usb_gpio_table = {
-	.dev_id = "musb-davinci",
-	.table = {
-		GPIO_LOOKUP("davinci_gpio", GPIO_nVBUS_DRV, NULL,
-			    GPIO_ACTIVE_HIGH),
-		{ }
-	},
-};
-
-static __init void davinci_evm_init(void)
-{
-	int ret;
-	struct clk *aemif_clk;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	dm644x_register_clocks();
-
-	regulator_register_always_on(0, "fixed-dummy", fixed_supplies_1_8v,
-				     ARRAY_SIZE(fixed_supplies_1_8v), 1800000);
-	regulator_register_always_on(1, "fixed-dummy", fixed_supplies_3_3v,
-				     ARRAY_SIZE(fixed_supplies_3_3v), 3300000);
-
-	dm644x_init_devices();
-
-	ret = dm644x_gpio_register();
-	if (ret)
-		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
-
-	aemif_clk = clk_get(NULL, "aemif");
-	clk_prepare_enable(aemif_clk);
-
-	if (HAS_ATA) {
-		if (HAS_NAND || HAS_NOR)
-			pr_warn("WARNING: both IDE and Flash are enabled, but they share AEMIF pins\n"
-				"\tDisable IDE for NAND/NOR support\n");
-		davinci_init_ide();
-	} else if (HAS_NAND || HAS_NOR) {
-		davinci_cfg_reg(DM644X_HPIEN_DISABLE);
-		davinci_cfg_reg(DM644X_ATAEN_DISABLE);
-
-		/* only one device will be jumpered and detected */
-		if (HAS_NAND) {
-			platform_device_register(&davinci_evm_aemif_device);
-#ifdef CONFIG_I2C
-			evm_leds[7].default_trigger = "nand-disk";
-#endif
-			if (HAS_NOR)
-				pr_warn("WARNING: both NAND and NOR flash are enabled; disable one of them.\n");
-		} else if (HAS_NOR)
-			platform_device_register(&davinci_evm_norflash_device);
-	}
-
-	platform_add_devices(davinci_evm_devices,
-			     ARRAY_SIZE(davinci_evm_devices));
-#ifdef CONFIG_I2C
-	nvmem_add_cell_table(&dm644evm_nvmem_cell_table);
-	nvmem_add_cell_lookups(&dm644evm_nvmem_cell_lookup, 1);
-	evm_init_i2c();
-	davinci_setup_mmc(0, &dm6446evm_mmc_config);
-#endif
-	dm644x_init_video(&dm644xevm_capture_cfg, &dm644xevm_display_cfg);
-
-	davinci_serial_init(dm644x_serial_device);
-	dm644x_init_asp();
-
-	/* irlml6401 switches over 1A, in under 8 msec */
-	gpiod_add_lookup_table(&dm644evm_usb_gpio_table);
-	davinci_setup_usb(1000, 8);
-
-	if (IS_BUILTIN(CONFIG_PHYLIB)) {
-		soc_info->emac_pdata->phy_id = DM644X_EVM_PHY_ID;
-		/* Register the fixup for PHY on DaVinci */
-		phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK,
-						davinci_phy_fixup);
-	}
-}
-
-MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
-	/* Maintainer: MontaVista Software <source@mvista.com> */
-	.atag_offset  = 0x100,
-	.map_io	      = davinci_evm_map_io,
-	.init_irq     = dm644x_init_irq,
-	.init_time	= dm644x_init_time,
-	.init_machine = davinci_evm_init,
-	.init_late	= davinci_init_late,
-	.dma_zone_size	= SZ_128M,
-MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
deleted file mode 100644
index ee91d81ebbfd..000000000000
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ /dev/null
@@ -1,876 +0,0 @@
-/*
- * TI DaVinci DM646X EVM board
- *
- * Derived from: arch/arm/mach-davinci/board-evm.c
- * Copyright (C) 2006 Texas Instruments.
- *
- * (C) 2007-2008, MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- *
- */
-
-/**************************************************************************
- * Included Files
- **************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/property.h>
-#include <linux/platform_data/pcf857x.h>
-#include <linux/platform_data/ti-aemif.h>
-
-#include <media/i2c/tvp514x.h>
-#include <media/i2c/adv7343.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/nvmem-provider.h>
-#include <linux/clk.h>
-#include <linux/export.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/platform_data/i2c-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mtd-davinci-aemif.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/common.h>
-#include <mach/serial.h>
-
-#include "davinci.h"
-#include "irqs.h"
-
-#define NAND_BLOCK_SIZE		SZ_128K
-
-/* Note: We are setting first partition as 'bootloader' constituting UBL, U-Boot
- * and U-Boot environment this avoids dependency on any particular combination
- * of UBL, U-Boot or flashing tools etc.
- */
-static struct mtd_partition davinci_nand_partitions[] = {
-	{
-		/* UBL, U-Boot with environment */
-		.name		= "bootloader",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 16 * NAND_BLOCK_SIZE,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	}, {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_4M,
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	}
-};
-
-static struct davinci_aemif_timing dm6467tevm_nandflash_timing = {
-	.wsetup		= 29,
-	.wstrobe	= 24,
-	.whold		= 14,
-	.rsetup		= 19,
-	.rstrobe	= 33,
-	.rhold		= 0,
-	.ta		= 29,
-};
-
-static struct davinci_nand_pdata davinci_nand_data = {
-	.core_chipsel		= 0,
-	.mask_cle 		= 0x80000,
-	.mask_ale 		= 0x40000,
-	.parts			= davinci_nand_partitions,
-	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
-	.engine_type		= NAND_ECC_ENGINE_TYPE_ON_HOST,
-	.ecc_bits		= 1,
-	.options		= 0,
-};
-
-static struct resource davinci_nand_resources[] = {
-	{
-		.start		= DM646X_ASYNC_EMIF_CS2_SPACE_BASE,
-		.end		= DM646X_ASYNC_EMIF_CS2_SPACE_BASE + SZ_32M - 1,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= DM646X_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DM646X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device davinci_aemif_devices[] = {
-	{
-		.name		= "davinci_nand",
-		.id		= 0,
-		.num_resources	= ARRAY_SIZE(davinci_nand_resources),
-		.resource	= davinci_nand_resources,
-		.dev		= {
-			.platform_data	= &davinci_nand_data,
-		},
-	},
-};
-
-static struct resource davinci_aemif_resources[] = {
-	{
-		.start	= DM646X_ASYNC_EMIF_CONTROL_BASE,
-		.end	= DM646X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct aemif_abus_data davinci_aemif_abus_data[] = {
-	{
-		.cs	= 1,
-	},
-};
-
-static struct aemif_platform_data davinci_aemif_pdata = {
-	.abus_data		= davinci_aemif_abus_data,
-	.num_abus_data		= ARRAY_SIZE(davinci_aemif_abus_data),
-	.sub_devices		= davinci_aemif_devices,
-	.num_sub_devices	= ARRAY_SIZE(davinci_aemif_devices),
-};
-
-static struct platform_device davinci_aemif_device = {
-	.name		= "ti-aemif",
-	.id		= -1,
-	.dev = {
-		.platform_data	= &davinci_aemif_pdata,
-	},
-	.resource	= davinci_aemif_resources,
-	.num_resources	= ARRAY_SIZE(davinci_aemif_resources),
-};
-
-#define HAS_ATA		(IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
-			 IS_ENABLED(CONFIG_PATA_BK3710))
-
-#ifdef CONFIG_I2C
-/* CPLD Register 0 bits to control ATA */
-#define DM646X_EVM_ATA_RST		BIT(0)
-#define DM646X_EVM_ATA_PWD		BIT(1)
-
-/* CPLD Register 0 Client: used for I/O Control */
-static int cpld_reg0_probe(struct i2c_client *client)
-{
-	if (HAS_ATA) {
-		u8 data;
-		struct i2c_msg msg[2] = {
-			{
-				.addr = client->addr,
-				.flags = I2C_M_RD,
-				.len = 1,
-				.buf = &data,
-			},
-			{
-				.addr = client->addr,
-				.flags = 0,
-				.len = 1,
-				.buf = &data,
-			},
-		};
-
-		/* Clear ATA_RSTn and ATA_PWD bits to enable ATA operation. */
-		i2c_transfer(client->adapter, msg, 1);
-		data &= ~(DM646X_EVM_ATA_RST | DM646X_EVM_ATA_PWD);
-		i2c_transfer(client->adapter, msg + 1, 1);
-	}
-
-	return 0;
-}
-
-static const struct i2c_device_id cpld_reg_ids[] = {
-	{ "cpld_reg0", 0, },
-	{ },
-};
-
-static struct i2c_driver dm6467evm_cpld_driver = {
-	.driver.name	= "cpld_reg0",
-	.id_table	= cpld_reg_ids,
-	.probe_new	= cpld_reg0_probe,
-};
-
-/* LEDS */
-
-static struct gpio_led evm_leds[] = {
-	{ .name = "DS1", .active_low = 1, },
-	{ .name = "DS2", .active_low = 1, },
-	{ .name = "DS3", .active_low = 1, },
-	{ .name = "DS4", .active_low = 1, },
-};
-
-static const struct gpio_led_platform_data evm_led_data = {
-	.num_leds = ARRAY_SIZE(evm_leds),
-	.leds     = evm_leds,
-};
-
-static struct platform_device *evm_led_dev;
-
-static int evm_led_setup(struct i2c_client *client, int gpio,
-			unsigned int ngpio, void *c)
-{
-	struct gpio_led *leds = evm_leds;
-	int status;
-
-	while (ngpio--) {
-		leds->gpio = gpio++;
-		leds++;
-	}
-
-	evm_led_dev = platform_device_alloc("leds-gpio", 0);
-	platform_device_add_data(evm_led_dev, &evm_led_data,
-				sizeof(evm_led_data));
-
-	evm_led_dev->dev.parent = &client->dev;
-	status = platform_device_add(evm_led_dev);
-	if (status < 0) {
-		platform_device_put(evm_led_dev);
-		evm_led_dev = NULL;
-	}
-	return status;
-}
-
-static int evm_led_teardown(struct i2c_client *client, int gpio,
-				unsigned ngpio, void *c)
-{
-	if (evm_led_dev) {
-		platform_device_unregister(evm_led_dev);
-		evm_led_dev = NULL;
-	}
-	return 0;
-}
-
-static int evm_sw_gpio[4] = { -EINVAL, -EINVAL, -EINVAL, -EINVAL };
-
-static int evm_sw_setup(struct i2c_client *client, int gpio,
-			unsigned ngpio, void *c)
-{
-	int status;
-	int i;
-	char label[10];
-
-	for (i = 0; i < 4; ++i) {
-		snprintf(label, 10, "user_sw%d", i);
-		status = gpio_request(gpio, label);
-		if (status)
-			goto out_free;
-		evm_sw_gpio[i] = gpio++;
-
-		status = gpio_direction_input(evm_sw_gpio[i]);
-		if (status)
-			goto out_free;
-
-		status = gpio_export(evm_sw_gpio[i], 0);
-		if (status)
-			goto out_free;
-	}
-	return 0;
-
-out_free:
-	for (i = 0; i < 4; ++i) {
-		if (evm_sw_gpio[i] != -EINVAL) {
-			gpio_free(evm_sw_gpio[i]);
-			evm_sw_gpio[i] = -EINVAL;
-		}
-	}
-	return status;
-}
-
-static int evm_sw_teardown(struct i2c_client *client, int gpio,
-			unsigned ngpio, void *c)
-{
-	int i;
-
-	for (i = 0; i < 4; ++i) {
-		if (evm_sw_gpio[i] != -EINVAL) {
-			gpio_unexport(evm_sw_gpio[i]);
-			gpio_free(evm_sw_gpio[i]);
-			evm_sw_gpio[i] = -EINVAL;
-		}
-	}
-	return 0;
-}
-
-static int evm_pcf_setup(struct i2c_client *client, int gpio,
-			unsigned int ngpio, void *c)
-{
-	int status;
-
-	if (ngpio < 8)
-		return -EINVAL;
-
-	status = evm_sw_setup(client, gpio, 4, c);
-	if (status)
-		return status;
-
-	return evm_led_setup(client, gpio+4, 4, c);
-}
-
-static int evm_pcf_teardown(struct i2c_client *client, int gpio,
-			unsigned int ngpio, void *c)
-{
-	BUG_ON(ngpio < 8);
-
-	evm_sw_teardown(client, gpio, 4, c);
-	evm_led_teardown(client, gpio+4, 4, c);
-
-	return 0;
-}
-
-static struct pcf857x_platform_data pcf_data = {
-	.gpio_base	= DAVINCI_N_GPIO+1,
-	.setup		= evm_pcf_setup,
-	.teardown	= evm_pcf_teardown,
-};
-
-/* Most of this EEPROM is unused, but U-Boot uses some data:
- *  - 0x7f00, 6 bytes Ethernet Address
- *  - ... newer boards may have more
- */
-
-static struct nvmem_cell_info dm646x_evm_nvmem_cells[] = {
-	{
-		.name		= "macaddr",
-		.offset		= 0x7f00,
-		.bytes		= ETH_ALEN,
-	}
-};
-
-static struct nvmem_cell_table dm646x_evm_nvmem_cell_table = {
-	.nvmem_name	= "1-00500",
-	.cells		= dm646x_evm_nvmem_cells,
-	.ncells		= ARRAY_SIZE(dm646x_evm_nvmem_cells),
-};
-
-static struct nvmem_cell_lookup dm646x_evm_nvmem_cell_lookup = {
-	.nvmem_name	= "1-00500",
-	.cell_name	= "macaddr",
-	.dev_id		= "davinci_emac.1",
-	.con_id		= "mac-address",
-};
-
-static const struct property_entry eeprom_properties[] = {
-	PROPERTY_ENTRY_U32("pagesize", 64),
-	{ }
-};
-
-static const struct software_node eeprom_node = {
-	.properties = eeprom_properties,
-};
-#endif
-
-static u8 dm646x_iis_serializer_direction[] = {
-       TX_MODE, RX_MODE, INACTIVE_MODE, INACTIVE_MODE,
-};
-
-static u8 dm646x_dit_serializer_direction[] = {
-       TX_MODE,
-};
-
-static struct snd_platform_data dm646x_evm_snd_data[] = {
-	{
-		.tx_dma_offset  = 0x400,
-		.rx_dma_offset  = 0x400,
-		.op_mode        = DAVINCI_MCASP_IIS_MODE,
-		.num_serializer = ARRAY_SIZE(dm646x_iis_serializer_direction),
-		.tdm_slots      = 2,
-		.serial_dir     = dm646x_iis_serializer_direction,
-		.asp_chan_q     = EVENTQ_0,
-	},
-	{
-		.tx_dma_offset  = 0x400,
-		.rx_dma_offset  = 0,
-		.op_mode        = DAVINCI_MCASP_DIT_MODE,
-		.num_serializer = ARRAY_SIZE(dm646x_dit_serializer_direction),
-		.tdm_slots      = 32,
-		.serial_dir     = dm646x_dit_serializer_direction,
-		.asp_chan_q     = EVENTQ_0,
-	},
-};
-
-#ifdef CONFIG_I2C
-static struct i2c_client *cpld_client;
-
-static int cpld_video_probe(struct i2c_client *client)
-{
-	cpld_client = client;
-	return 0;
-}
-
-static int cpld_video_remove(struct i2c_client *client)
-{
-	cpld_client = NULL;
-	return 0;
-}
-
-static const struct i2c_device_id cpld_video_id[] = {
-	{ "cpld_video", 0 },
-	{ }
-};
-
-static struct i2c_driver cpld_video_driver = {
-	.driver = {
-		.name	= "cpld_video",
-	},
-	.probe_new	= cpld_video_probe,
-	.remove		= cpld_video_remove,
-	.id_table	= cpld_video_id,
-};
-
-static void evm_init_cpld(void)
-{
-	i2c_add_driver(&cpld_video_driver);
-}
-
-static struct i2c_board_info __initdata i2c_info[] =  {
-	{
-		I2C_BOARD_INFO("24c256", 0x50),
-		.swnode = &eeprom_node,
-	},
-	{
-		I2C_BOARD_INFO("pcf8574a", 0x38),
-		.platform_data	= &pcf_data,
-	},
-	{
-		I2C_BOARD_INFO("cpld_reg0", 0x3a),
-	},
-	{
-		I2C_BOARD_INFO("tlv320aic33", 0x18),
-	},
-	{
-		I2C_BOARD_INFO("cpld_video", 0x3b),
-	},
-};
-
-static struct davinci_i2c_platform_data i2c_pdata = {
-	.bus_freq       = 100 /* kHz */,
-	.bus_delay      = 0 /* usec */,
-};
-
-#define VCH2CLK_MASK		(BIT_MASK(10) | BIT_MASK(9) | BIT_MASK(8))
-#define VCH2CLK_SYSCLK8		(BIT(9))
-#define VCH2CLK_AUXCLK		(BIT(9) | BIT(8))
-#define VCH3CLK_MASK		(BIT_MASK(14) | BIT_MASK(13) | BIT_MASK(12))
-#define VCH3CLK_SYSCLK8		(BIT(13))
-#define VCH3CLK_AUXCLK		(BIT(14) | BIT(13))
-
-#define VIDCH2CLK		(BIT(10))
-#define VIDCH3CLK		(BIT(11))
-#define VIDCH1CLK		(BIT(4))
-#define TVP7002_INPUT		(BIT(4))
-#define TVP5147_INPUT		(~BIT(4))
-#define VPIF_INPUT_ONE_CHANNEL	(BIT(5))
-#define VPIF_INPUT_TWO_CHANNEL	(~BIT(5))
-#define TVP5147_CH0		"tvp514x-0"
-#define TVP5147_CH1		"tvp514x-1"
-
-/* spin lock for updating above registers */
-static spinlock_t vpif_reg_lock;
-
-static int set_vpif_clock(int mux_mode, int hd)
-{
-	unsigned long flags;
-	unsigned int value;
-	int val = 0;
-	int err = 0;
-
-	if (!cpld_client)
-		return -ENXIO;
-
-	/* disable the clock */
-	spin_lock_irqsave(&vpif_reg_lock, flags);
-	value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS));
-	value |= (VIDCH3CLK | VIDCH2CLK);
-	__raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS));
-	spin_unlock_irqrestore(&vpif_reg_lock, flags);
-
-	val = i2c_smbus_read_byte(cpld_client);
-	if (val < 0)
-		return val;
-
-	if (mux_mode == 1)
-		val &= ~0x40;
-	else
-		val |= 0x40;
-
-	err = i2c_smbus_write_byte(cpld_client, val);
-	if (err)
-		return err;
-
-	value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL));
-	value &= ~(VCH2CLK_MASK);
-	value &= ~(VCH3CLK_MASK);
-
-	if (hd >= 1)
-		value |= (VCH2CLK_SYSCLK8 | VCH3CLK_SYSCLK8);
-	else
-		value |= (VCH2CLK_AUXCLK | VCH3CLK_AUXCLK);
-
-	__raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL));
-
-	spin_lock_irqsave(&vpif_reg_lock, flags);
-	value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS));
-	/* enable the clock */
-	value &= ~(VIDCH3CLK | VIDCH2CLK);
-	__raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS));
-	spin_unlock_irqrestore(&vpif_reg_lock, flags);
-
-	return 0;
-}
-
-static struct vpif_subdev_info dm646x_vpif_subdev[] = {
-	{
-		.name	= "adv7343",
-		.board_info = {
-			I2C_BOARD_INFO("adv7343", 0x2a),
-		},
-	},
-	{
-		.name	= "ths7303",
-		.board_info = {
-			I2C_BOARD_INFO("ths7303", 0x2c),
-		},
-	},
-};
-
-static const struct vpif_output dm6467_ch0_outputs[] = {
-	{
-		.output = {
-			.index = 0,
-			.name = "Composite",
-			.type = V4L2_OUTPUT_TYPE_ANALOG,
-			.capabilities = V4L2_OUT_CAP_STD,
-			.std = V4L2_STD_ALL,
-		},
-		.subdev_name = "adv7343",
-		.output_route = ADV7343_COMPOSITE_ID,
-	},
-	{
-		.output = {
-			.index = 1,
-			.name = "Component",
-			.type = V4L2_OUTPUT_TYPE_ANALOG,
-			.capabilities = V4L2_OUT_CAP_DV_TIMINGS,
-		},
-		.subdev_name = "adv7343",
-		.output_route = ADV7343_COMPONENT_ID,
-	},
-	{
-		.output = {
-			.index = 2,
-			.name = "S-Video",
-			.type = V4L2_OUTPUT_TYPE_ANALOG,
-			.capabilities = V4L2_OUT_CAP_STD,
-			.std = V4L2_STD_ALL,
-		},
-		.subdev_name = "adv7343",
-		.output_route = ADV7343_SVIDEO_ID,
-	},
-};
-
-static struct vpif_display_config dm646x_vpif_display_config = {
-	.set_clock	= set_vpif_clock,
-	.subdevinfo	= dm646x_vpif_subdev,
-	.subdev_count	= ARRAY_SIZE(dm646x_vpif_subdev),
-	.i2c_adapter_id = 1,
-	.chan_config[0] = {
-		.outputs = dm6467_ch0_outputs,
-		.output_count = ARRAY_SIZE(dm6467_ch0_outputs),
-	},
-	.card_name	= "DM646x EVM Video Display",
-};
-
-/**
- * setup_vpif_input_path()
- * @channel: channel id (0 - CH0, 1 - CH1)
- * @sub_dev_name: ptr sub device name
- *
- * This will set vpif input to capture data from tvp514x or
- * tvp7002.
- */
-static int setup_vpif_input_path(int channel, const char *sub_dev_name)
-{
-	int err = 0;
-	int val;
-
-	/* for channel 1, we don't do anything */
-	if (channel != 0)
-		return 0;
-
-	if (!cpld_client)
-		return -ENXIO;
-
-	val = i2c_smbus_read_byte(cpld_client);
-	if (val < 0)
-		return val;
-
-	if (!strcmp(sub_dev_name, TVP5147_CH0) ||
-	    !strcmp(sub_dev_name, TVP5147_CH1))
-		val &= TVP5147_INPUT;
-	else
-		val |= TVP7002_INPUT;
-
-	err = i2c_smbus_write_byte(cpld_client, val);
-	if (err)
-		return err;
-	return 0;
-}
-
-/**
- * setup_vpif_input_channel_mode()
- * @mux_mode:  mux mode. 0 - 1 channel or (1) - 2 channel
- *
- * This will setup input mode to one channel (TVP7002) or 2 channel (TVP5147)
- */
-static int setup_vpif_input_channel_mode(int mux_mode)
-{
-	unsigned long flags;
-	int err = 0;
-	int val;
-	u32 value;
-
-	if (!cpld_client)
-		return -ENXIO;
-
-	val = i2c_smbus_read_byte(cpld_client);
-	if (val < 0)
-		return val;
-
-	spin_lock_irqsave(&vpif_reg_lock, flags);
-	value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL));
-	if (mux_mode) {
-		val &= VPIF_INPUT_TWO_CHANNEL;
-		value |= VIDCH1CLK;
-	} else {
-		val |= VPIF_INPUT_ONE_CHANNEL;
-		value &= ~VIDCH1CLK;
-	}
-	__raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL));
-	spin_unlock_irqrestore(&vpif_reg_lock, flags);
-
-	err = i2c_smbus_write_byte(cpld_client, val);
-	if (err)
-		return err;
-
-	return 0;
-}
-
-static struct tvp514x_platform_data tvp5146_pdata = {
-	.clk_polarity = 0,
-	.hs_polarity = 1,
-	.vs_polarity = 1
-};
-
-#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
-
-static struct vpif_subdev_info vpif_capture_sdev_info[] = {
-	{
-		.name	= TVP5147_CH0,
-		.board_info = {
-			I2C_BOARD_INFO("tvp5146", 0x5d),
-			.platform_data = &tvp5146_pdata,
-		},
-	},
-	{
-		.name	= TVP5147_CH1,
-		.board_info = {
-			I2C_BOARD_INFO("tvp5146", 0x5c),
-			.platform_data = &tvp5146_pdata,
-		},
-	},
-};
-
-static struct vpif_input dm6467_ch0_inputs[] = {
-	{
-		.input = {
-			.index = 0,
-			.name = "Composite",
-			.type = V4L2_INPUT_TYPE_CAMERA,
-			.capabilities = V4L2_IN_CAP_STD,
-			.std = TVP514X_STD_ALL,
-		},
-		.subdev_name = TVP5147_CH0,
-		.input_route = INPUT_CVBS_VI2B,
-		.output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC,
-	},
-};
-
-static struct vpif_input dm6467_ch1_inputs[] = {
-       {
-		.input = {
-			.index = 0,
-			.name = "S-Video",
-			.type = V4L2_INPUT_TYPE_CAMERA,
-			.capabilities = V4L2_IN_CAP_STD,
-			.std = TVP514X_STD_ALL,
-		},
-		.subdev_name = TVP5147_CH1,
-		.input_route = INPUT_SVIDEO_VI2C_VI1C,
-		.output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC,
-	},
-};
-
-static struct vpif_capture_config dm646x_vpif_capture_cfg = {
-	.setup_input_path = setup_vpif_input_path,
-	.setup_input_channel_mode = setup_vpif_input_channel_mode,
-	.subdev_info = vpif_capture_sdev_info,
-	.subdev_count = ARRAY_SIZE(vpif_capture_sdev_info),
-	.i2c_adapter_id = 1,
-	.chan_config[0] = {
-		.inputs = dm6467_ch0_inputs,
-		.input_count = ARRAY_SIZE(dm6467_ch0_inputs),
-		.vpif_if = {
-			.if_type = VPIF_IF_BT656,
-			.hd_pol = 1,
-			.vd_pol = 1,
-			.fid_pol = 0,
-		},
-	},
-	.chan_config[1] = {
-		.inputs = dm6467_ch1_inputs,
-		.input_count = ARRAY_SIZE(dm6467_ch1_inputs),
-		.vpif_if = {
-			.if_type = VPIF_IF_BT656,
-			.hd_pol = 1,
-			.vd_pol = 1,
-			.fid_pol = 0,
-		},
-	},
-	.card_name = "DM646x EVM Video Capture",
-};
-
-static void __init evm_init_video(void)
-{
-	spin_lock_init(&vpif_reg_lock);
-
-	dm646x_setup_vpif(&dm646x_vpif_display_config,
-			  &dm646x_vpif_capture_cfg);
-}
-
-static void __init evm_init_i2c(void)
-{
-	davinci_init_i2c(&i2c_pdata);
-	i2c_add_driver(&dm6467evm_cpld_driver);
-	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
-	evm_init_cpld();
-	evm_init_video();
-}
-#endif
-
-#define DM646X_REF_FREQ			27000000
-#define DM646X_AUX_FREQ			24000000
-#define DM6467T_EVM_REF_FREQ		33000000
-
-static void __init davinci_map_io(void)
-{
-	dm646x_init();
-}
-
-static void __init dm646x_evm_init_time(void)
-{
-	dm646x_init_time(DM646X_REF_FREQ, DM646X_AUX_FREQ);
-}
-
-static void __init dm6467t_evm_init_time(void)
-{
-	dm646x_init_time(DM6467T_EVM_REF_FREQ, DM646X_AUX_FREQ);
-}
-
-#define DM646X_EVM_PHY_ID		"davinci_mdio-0:01"
-/*
- * The following EDMA channels/slots are not being used by drivers (for
- * example: Timer, GPIO, UART events etc) on dm646x, hence they are being
- * reserved for codecs on the DSP side.
- */
-static const s16 dm646x_dma_rsv_chans[][2] = {
-	/* (offset, number) */
-	{ 0,  4},
-	{13,  3},
-	{24,  4},
-	{30,  2},
-	{54,  3},
-	{-1, -1}
-};
-
-static const s16 dm646x_dma_rsv_slots[][2] = {
-	/* (offset, number) */
-	{ 0,  4},
-	{13,  3},
-	{24,  4},
-	{30,  2},
-	{54,  3},
-	{128, 384},
-	{-1, -1}
-};
-
-static struct edma_rsv_info dm646x_edma_rsv[] = {
-	{
-		.rsv_chans	= dm646x_dma_rsv_chans,
-		.rsv_slots	= dm646x_dma_rsv_slots,
-	},
-};
-
-static __init void evm_init(void)
-{
-	int ret;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	dm646x_register_clocks();
-
-	ret = dm646x_gpio_register();
-	if (ret)
-		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
-
-#ifdef CONFIG_I2C
-	nvmem_add_cell_table(&dm646x_evm_nvmem_cell_table);
-	nvmem_add_cell_lookups(&dm646x_evm_nvmem_cell_lookup, 1);
-	evm_init_i2c();
-#endif
-
-	davinci_serial_init(dm646x_serial_device);
-	dm646x_init_mcasp0(&dm646x_evm_snd_data[0]);
-	dm646x_init_mcasp1(&dm646x_evm_snd_data[1]);
-
-	if (machine_is_davinci_dm6467tevm())
-		davinci_nand_data.timing = &dm6467tevm_nandflash_timing;
-
-	if (platform_device_register(&davinci_aemif_device))
-		pr_warn("%s: Cannot register AEMIF device.\n", __func__);
-
-	dm646x_init_edma(dm646x_edma_rsv);
-
-	if (HAS_ATA)
-		davinci_init_ide();
-
-	soc_info->emac_pdata->phy_id = DM646X_EVM_PHY_ID;
-}
-
-MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
-	.atag_offset  = 0x100,
-	.map_io       = davinci_map_io,
-	.init_irq     = dm646x_init_irq,
-	.init_time	= dm646x_evm_init_time,
-	.init_machine = evm_init,
-	.init_late	= davinci_init_late,
-	.dma_zone_size	= SZ_128M,
-MACHINE_END
-
-MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM")
-	.atag_offset  = 0x100,
-	.map_io       = davinci_map_io,
-	.init_irq     = dm646x_init_irq,
-	.init_time	= dm6467t_evm_init_time,
-	.init_machine = evm_init,
-	.init_late	= davinci_init_late,
-	.dma_zone_size	= SZ_128M,
-MACHINE_END
-
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index 2127969beb96..a46e7b9ff8e0 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Critical Link MityOMAP-L138 SoM
  *
  * Copyright (C) 2010 Critical Link LLC - https://www.criticallink.com
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of
- * any kind, whether express or implied.
  */
 
 #define pr_fmt(fmt) "MityOMAPL138: " fmt
@@ -28,12 +25,14 @@
 #include <asm/io.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/common.h>
-#include <mach/da8xx.h>
+
+#include "common.h"
+#include "da8xx.h"
+#include "mux.h"
+
 #include <linux/platform_data/mtd-davinci.h>
 #include <linux/platform_data/mtd-davinci-aemif.h>
 #include <linux/platform_data/ti-aemif.h>
-#include <mach/mux.h>
 #include <linux/platform_data/spi-davinci.h>
 
 #define MITYOMAPL138_PHY_ID		""
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
deleted file mode 100644
index b4843f68bb57..000000000000
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ /dev/null
@@ -1,239 +0,0 @@
-/*
- * Neuros Technologies OSD2 board support
- *
- * Modified from original 644X-EVM board support.
- * 2008 (c) Neuros Technology, LLC.
- * 2009 (c) Jorge Luis Zapata Muga <jorgeluis.zapata@gmail.com>
- * 2009 (c) Andrey A. Porodko <Andrey.Porodko@gmail.com>
- *
- * The Neuros OSD 2.0 is the hardware component of the Neuros Open
- * Internet Television Platform. Hardware is very close to TI
- * DM644X-EVM board. It has:
- * 	DM6446M02 module with 256MB NAND, 256MB RAM, TLV320AIC32 AIC,
- * 	USB, Ethernet, SD/MMC, UART, THS8200, TVP7000 for video.
- * 	Additionally realtime clock, IR remote control receiver,
- * 	IR Blaster based on MSP430 (firmware although is different
- * 	from used in DM644X-EVM), internal ATA-6 3.5” HDD drive
- * 	with PATA interface, two muxed red-green leds.
- *
- * For more information please refer to
- * 		http://wiki.neurostechnology.com/index.php/OSD_2.0_HD
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/platform_data/i2c-davinci.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/usb-davinci.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/common.h>
-#include <mach/serial.h>
-#include <mach/mux.h>
-
-#include "davinci.h"
-
-#define NEUROS_OSD2_PHY_ID		"davinci_mdio-0:01"
-#define LXT971_PHY_ID			0x001378e2
-#define LXT971_PHY_MASK			0xfffffff0
-
-#define	NTOSD2_AUDIOSOC_I2C_ADDR	0x18
-#define	NTOSD2_MSP430_I2C_ADDR		0x59
-#define	NTOSD2_MSP430_IRQ		2
-
-/* Neuros OSD2 has a Samsung 256 MByte NAND flash (Dev ID of 0xAA,
- * 2048 blocks in the device, 64 pages per block, 2048 bytes per
- * page.
- */
-
-#define NAND_BLOCK_SIZE		SZ_128K
-
-static struct mtd_partition davinci_ntosd2_nandflash_partition[] = {
-	{
-		/* UBL (a few copies) plus U-Boot */
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= 15 * NAND_BLOCK_SIZE,
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-	}, {
-		/* U-Boot environment */
-		.name		= "params",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 1 * NAND_BLOCK_SIZE,
-		.mask_flags	= 0,
-	}, {
-		/* Kernel */
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_4M,
-		.mask_flags	= 0,
-	}, {
-		/* File System */
-		.name		= "filesystem",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	}
-	/* A few blocks at end hold a flash Bad Block Table. */
-};
-
-static struct davinci_nand_pdata davinci_ntosd2_nandflash_data = {
-	.core_chipsel	= 0,
-	.parts		= davinci_ntosd2_nandflash_partition,
-	.nr_parts	= ARRAY_SIZE(davinci_ntosd2_nandflash_partition),
-	.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST,
-	.ecc_bits	= 1,
-	.bbt_options	= NAND_BBT_USE_FLASH,
-};
-
-static struct resource davinci_ntosd2_nandflash_resource[] = {
-	{
-		.start		= DM644X_ASYNC_EMIF_DATA_CE0_BASE,
-		.end		= DM644X_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= DM644X_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DM644X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device davinci_ntosd2_nandflash_device = {
-	.name		= "davinci_nand",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &davinci_ntosd2_nandflash_data,
-	},
-	.num_resources	= ARRAY_SIZE(davinci_ntosd2_nandflash_resource),
-	.resource	= davinci_ntosd2_nandflash_resource,
-};
-
-static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device davinci_fb_device = {
-	.name		= "davincifb",
-	.id		= -1,
-	.dev = {
-		.dma_mask		= &davinci_fb_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.num_resources = 0,
-};
-
-static const struct gpio_led ntosd2_leds[] = {
-	{ .name = "led1_green", .gpio = 10, },
-	{ .name = "led1_red",   .gpio = 11, },
-	{ .name = "led2_green", .gpio = 12, },
-	{ .name = "led2_red",   .gpio = 13, },
-};
-
-static struct gpio_led_platform_data ntosd2_leds_data = {
-	.num_leds	= ARRAY_SIZE(ntosd2_leds),
-	.leds		= ntosd2_leds,
-};
-
-static struct platform_device ntosd2_leds_dev = {
-	.name = "leds-gpio",
-	.id   = -1,
-	.dev = {
-		.platform_data 		= &ntosd2_leds_data,
-	},
-};
-
-
-static struct platform_device *davinci_ntosd2_devices[] __initdata = {
-	&davinci_fb_device,
-	&ntosd2_leds_dev,
-};
-
-static void __init davinci_ntosd2_map_io(void)
-{
-	dm644x_init();
-}
-
-static struct davinci_mmc_config davinci_ntosd2_mmc_config = {
-	.wires		= 4,
-};
-
-#define HAS_ATA		(IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
-			 IS_ENABLED(CONFIG_PATA_BK3710))
-
-#define HAS_NAND	IS_ENABLED(CONFIG_MTD_NAND_DAVINCI)
-
-static __init void davinci_ntosd2_init(void)
-{
-	int ret;
-	struct clk *aemif_clk;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	dm644x_register_clocks();
-
-	dm644x_init_devices();
-
-	ret = dm644x_gpio_register();
-	if (ret)
-		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
-
-	aemif_clk = clk_get(NULL, "aemif");
-	clk_prepare_enable(aemif_clk);
-
-	if (HAS_ATA) {
-		if (HAS_NAND)
-			pr_warn("WARNING: both IDE and Flash are enabled, but they share AEMIF pins\n"
-				"\tDisable IDE for NAND/NOR support\n");
-		davinci_init_ide();
-	} else if (HAS_NAND) {
-		davinci_cfg_reg(DM644X_HPIEN_DISABLE);
-		davinci_cfg_reg(DM644X_ATAEN_DISABLE);
-
-		/* only one device will be jumpered and detected */
-		if (HAS_NAND)
-			platform_device_register(
-					&davinci_ntosd2_nandflash_device);
-	}
-
-	platform_add_devices(davinci_ntosd2_devices,
-				ARRAY_SIZE(davinci_ntosd2_devices));
-
-	davinci_serial_init(dm644x_serial_device);
-	dm644x_init_asp();
-
-	soc_info->emac_pdata->phy_id = NEUROS_OSD2_PHY_ID;
-
-	davinci_setup_usb(1000, 8);
-	/*
-	 * Mux the pins to be GPIOs, VLYNQEN is already done at startup.
-	 * The AEAWx are five new AEAW pins that can be muxed by separately.
-	 * They are a bitmask for GPIO management. According TI
-	 * documentation (https://www.ti.com/lit/gpn/tms320dm6446) to employ
-	 * gpio(10,11,12,13) for leds any combination of bits works except
-	 * four last. So we are to reset all five.
-	 */
-	davinci_cfg_reg(DM644X_AEAW0);
-	davinci_cfg_reg(DM644X_AEAW1);
-	davinci_cfg_reg(DM644X_AEAW2);
-	davinci_cfg_reg(DM644X_AEAW3);
-	davinci_cfg_reg(DM644X_AEAW4);
-
-	davinci_setup_mmc(0, &davinci_ntosd2_mmc_config);
-}
-
-MACHINE_START(NEUROS_OSD2, "Neuros OSD2")
-	/* Maintainer: Neuros Technologies <neuros@groups.google.com> */
-	.atag_offset	= 0x100,
-	.map_io		 = davinci_ntosd2_map_io,
-	.init_irq	= dm644x_init_irq,
-	.init_time	= dm644x_init_time,
-	.init_machine = davinci_ntosd2_init,
-	.init_late	= davinci_init_late,
-	.dma_zone_size	= SZ_128M,
-MACHINE_END
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index 88df8011a4e6..8a80115999ad 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Hawkboard.org based on TI's OMAP-L138 Platform
  *
  * Initial code: Syed Mohammed Khasim
  *
  * Copyright (C) 2009 Texas Instruments Incorporated - https://www.ti.com
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of
- * any kind, whether express or implied.
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -27,9 +24,9 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/common.h>
-#include <mach/da8xx.h>
-#include <mach/mux.h>
+#include "common.h"
+#include "da8xx.h"
+#include "mux.h"
 
 #define HAWKBOARD_PHY_ID		"davinci_mdio-0:07"
 
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
deleted file mode 100644
index 6930b2f485d1..000000000000
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ /dev/null
@@ -1,151 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Lyrtech SFFSDR board support.
- *
- * Copyright (C) 2008 Philip Balister, OpenSDR <philip@opensdr.com>
- * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
- *
- * Based on DV-EVM platform, original copyright follows:
- *
- * Copyright (C) 2007 MontaVista Software, Inc.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/property.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-#include <mach/common.h>
-#include <linux/platform_data/i2c-davinci.h>
-#include <mach/serial.h>
-#include <mach/mux.h>
-#include <linux/platform_data/usb-davinci.h>
-
-#include "davinci.h"
-
-#define SFFSDR_PHY_ID		"davinci_mdio-0:01"
-static struct mtd_partition davinci_sffsdr_nandflash_partition[] = {
-	/* U-Boot Environment: Block 0
-	 * UBL:                Block 1
-	 * U-Boot:             Blocks 6-7 (256 kb)
-	 * Integrity Kernel:   Blocks 8-31 (3 Mb)
-	 * Integrity Data:     Blocks 100-END
-	 */
-	{
-		.name		= "Linux Kernel",
-		.offset		= 32 * SZ_128K,
-		.size		= 16 * SZ_128K, /* 2 Mb */
-		.mask_flags	= MTD_WRITEABLE, /* Force read-only */
-	},
-	{
-		.name		= "Linux ROOT",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 256 * SZ_128K, /* 32 Mb */
-		.mask_flags	= 0, /* R/W */
-	},
-};
-
-static struct flash_platform_data davinci_sffsdr_nandflash_data = {
-	.parts		= davinci_sffsdr_nandflash_partition,
-	.nr_parts	= ARRAY_SIZE(davinci_sffsdr_nandflash_partition),
-};
-
-static struct resource davinci_sffsdr_nandflash_resource[] = {
-	{
-		.start		= DM644X_ASYNC_EMIF_DATA_CE0_BASE,
-		.end		= DM644X_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= DM644X_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DM644X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device davinci_sffsdr_nandflash_device = {
-	.name		= "davinci_nand", /* Name of driver */
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &davinci_sffsdr_nandflash_data,
-	},
-	.num_resources	= ARRAY_SIZE(davinci_sffsdr_nandflash_resource),
-	.resource	= davinci_sffsdr_nandflash_resource,
-};
-
-static const struct property_entry eeprom_properties[] = {
-	PROPERTY_ENTRY_U32("pagesize", 32),
-	{ }
-};
-
-static const struct software_node eeprom_node = {
-	.properties = eeprom_properties,
-};
-
-static struct i2c_board_info __initdata i2c_info[] =  {
-	{
-		I2C_BOARD_INFO("24c64", 0x50),
-		.swnode = &eeprom_node,
-	},
-	/* Other I2C devices:
-	 * MSP430,  addr 0x23 (not used)
-	 * PCA9543, addr 0x70 (setup done by U-Boot)
-	 * ADS7828, addr 0x48 (ADC for voltage monitoring.)
-	 */
-};
-
-static struct davinci_i2c_platform_data i2c_pdata = {
-	.bus_freq	= 20 /* kHz */,
-	.bus_delay	= 100 /* usec */,
-};
-
-static void __init sffsdr_init_i2c(void)
-{
-	davinci_init_i2c(&i2c_pdata);
-	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
-}
-
-static struct platform_device *davinci_sffsdr_devices[] __initdata = {
-	&davinci_sffsdr_nandflash_device,
-};
-
-static void __init davinci_sffsdr_map_io(void)
-{
-	dm644x_init();
-}
-
-static __init void davinci_sffsdr_init(void)
-{
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	dm644x_register_clocks();
-
-	dm644x_init_devices();
-
-	platform_add_devices(davinci_sffsdr_devices,
-			     ARRAY_SIZE(davinci_sffsdr_devices));
-	sffsdr_init_i2c();
-	davinci_serial_init(dm644x_serial_device);
-	soc_info->emac_pdata->phy_id = SFFSDR_PHY_ID;
-	davinci_setup_usb(0, 0); /* We support only peripheral mode. */
-
-	/* mux VLYNQ pins */
-	davinci_cfg_reg(DM644X_VLYNQEN);
-	davinci_cfg_reg(DM644X_VLYNQWD);
-}
-
-MACHINE_START(SFFSDR, "Lyrtech SFFSDR")
-	.atag_offset  = 0x100,
-	.map_io	      = davinci_sffsdr_map_io,
-	.init_irq     = dm644x_init_irq,
-	.init_time	= dm644x_init_time,
-	.init_machine = davinci_sffsdr_init,
-	.init_late	= davinci_init_late,
-	.dma_zone_size	= SZ_128M,
-MACHINE_END
diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c
index ae61d19f9b3a..c1ce6b2a8d48 100644
--- a/arch/arm/mach-davinci/common.c
+++ b/arch/arm/mach-davinci/common.c
@@ -1,12 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Code commons to all DaVinci SoCs.
  *
  * Author: Mark A. Greer <mgreer@mvista.com>
  *
- * 2009 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
+ * 2009 (c) MontaVista Software, Inc.
  */
 #include <linux/module.h>
 #include <linux/io.h>
@@ -17,8 +15,8 @@
 #include <asm/tlb.h>
 #include <asm/mach/map.h>
 
-#include <mach/common.h>
-#include <mach/cputype.h>
+#include "common.h"
+#include "cputype.h"
 
 struct davinci_soc_info davinci_soc_info;
 EXPORT_SYMBOL(davinci_soc_info);
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/common.h
index 139b83de011d..772b51e0ac5e 100644
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/common.h
@@ -1,12 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Header for code common to all DaVinci machines.
  *
  * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
  *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
+ * 2007 (c) MontaVista Software, Inc.
  */
 
 #ifndef __ARCH_ARM_MACH_DAVINCI_COMMON_H
diff --git a/arch/arm/mach-davinci/cpuidle.h b/arch/arm/mach-davinci/cpuidle.h
index 0d9193aefab5..976d43073597 100644
--- a/arch/arm/mach-davinci/cpuidle.h
+++ b/arch/arm/mach-davinci/cpuidle.h
@@ -1,11 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * TI DaVinci cpuidle platform support
  *
  * 2009 (C) Texas Instruments, Inc. https://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 #ifndef _MACH_DAVINCI_CPUIDLE_H
 #define _MACH_DAVINCI_CPUIDLE_H
diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/cputype.h
index 1fc84e21664d..4590afdbe449 100644
--- a/arch/arm/mach-davinci/include/mach/cputype.h
+++ b/arch/arm/mach-davinci/cputype.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * DaVinci CPU type detection
  *
@@ -8,15 +9,12 @@
  * compiled in to the kernel, the macros return 0 so that
  * resulting code can be optimized out.
  *
- * 2009 (c) Deep Root Systems, LLC. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
+ * 2009 (c) Deep Root Systems, LLC.
  */
 #ifndef _ASM_ARCH_CPU_H
 #define _ASM_ARCH_CPU_H
 
-#include <mach/common.h>
+#include "common.h"
 
 struct davinci_id {
 	u8	variant;	/* JTAG ID bits 31:28 */
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index 018ab4b549f1..eab5fac18806 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -1,12 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * TI DA830/OMAP L137 chip specific setup
  *
  * Author: Mark A. Greer <mgreer@mvista.com>
  *
- * 2009 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
+ * 2009 (c) MontaVista Software, Inc.
  */
 #include <linux/clk-provider.h>
 #include <linux/clk/davinci.h>
@@ -16,14 +14,13 @@
 #include <linux/irqchip/irq-davinci-cp-intc.h>
 #include <linux/platform_data/gpio-davinci.h>
 
-#include <asm/mach/map.h>
-
-#include <mach/common.h>
-#include <mach/cputype.h>
-#include <mach/da8xx.h>
-
 #include <clocksource/timer-davinci.h>
 
+#include <asm/mach/map.h>
+
+#include "common.h"
+#include "cputype.h"
+#include "da8xx.h"
 #include "irqs.h"
 #include "mux.h"
 
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 68156e7239a6..635e88daf5dd 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * TI DA850/OMAP-L138 chip specific setup
  *
@@ -6,10 +7,7 @@
  * Derived from: arch/arm/mach-davinci/da830.c
  * Original Copyrights follow:
  *
- * 2009 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
+ * 2009 (c) MontaVista Software, Inc.
  */
 
 #include <linux/clk-provider.h>
@@ -28,16 +26,14 @@
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
+#include <clocksource/timer-davinci.h>
 
 #include <asm/mach/map.h>
 
-#include <mach/common.h>
-#include <mach/cputype.h>
-#include <mach/da8xx.h>
-#include <mach/pm.h>
-
-#include <clocksource/timer-davinci.h>
-
+#include "common.h"
+#include "cputype.h"
+#include "da8xx.h"
+#include "pm.h"
 #include "irqs.h"
 #include "mux.h"
 
diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
index 0cd2f30aeb9c..45763a9b37ee 100644
--- a/arch/arm/mach-davinci/da8xx-dt.c
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -7,8 +7,8 @@
 
 #include <asm/mach/arch.h>
 
-#include <mach/common.h>
-#include <mach/da8xx.h>
+#include "common.h"
+#include "da8xx.h"
 
 #ifdef CONFIG_ARCH_DAVINCI_DA850
 
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/da8xx.h
index 1618b30661a9..382811dbbc3b 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/da8xx.h
@@ -1,12 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Chip specific defines for DA8XX/OMAP L1XX SoC
  *
  * Author: Mark A. Greer <mgreer@mvista.com>
  *
- * 2007, 2009-2010 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
+ * 2007, 2009-2010 (c) MontaVista Software, Inc.
  */
 #ifndef __ASM_ARCH_DAVINCI_DA8XX_H
 #define __ASM_ARCH_DAVINCI_DA8XX_H
@@ -21,8 +19,9 @@
 #include <linux/regmap.h>
 #include <linux/videodev2.h>
 
-#include <mach/serial.h>
-#include <mach/pm.h>
+#include "serial.h"
+#include "pm.h"
+
 #include <linux/platform_data/edma.h>
 #include <linux/platform_data/i2c-davinci.h>
 #include <linux/platform_data/mmc-davinci.h>
diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h
index 208d7a4d3597..b7172797692b 100644
--- a/arch/arm/mach-davinci/davinci.h
+++ b/arch/arm/mach-davinci/davinci.h
@@ -1,18 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * This file contains the processor specific definitions
  * of the TI DM644x, DM355, DM365, and DM646x.
  *
  * Copyright (C) 2011 Texas Instruments Incorporated
  * Copyright (c) 2007 Deep Root Systems, LLC
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 #ifndef __DAVINCI_H
 #define __DAVINCI_H
@@ -25,7 +17,8 @@
 #include <linux/platform_data/davinci_asp.h>
 #include <linux/platform_data/edma.h>
 #include <linux/platform_data/keyscan-davinci.h>
-#include <mach/hardware.h>
+
+#include "hardware.h"
 
 #include <media/davinci/vpfe_capture.h>
 #include <media/davinci/vpif_types.h>
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index bb368938fc49..ef9593558e5f 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -18,10 +18,9 @@
 #include <linux/reboot.h>
 #include <linux/serial_8250.h>
 
-#include <mach/common.h>
-#include <mach/cputype.h>
-#include <mach/da8xx.h>
-
+#include "common.h"
+#include "cputype.h"
+#include "da8xx.h"
 #include "asp.h"
 #include "cpuidle.h"
 #include "irqs.h"
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index 849e811fade7..199c26d9a2b6 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -14,10 +14,9 @@
 #include <linux/io.h>
 #include <linux/reboot.h>
 
-#include <mach/hardware.h>
-#include <mach/cputype.h>
-#include <mach/mux.h>
-
+#include "hardware.h"
+#include "cputype.h"
+#include "mux.h"
 #include "davinci.h"
 #include "irqs.h"
 
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 5de72d2fa8f0..a12ba859beca 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -1,12 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * TI DaVinci DM355 chip specific setup
  *
  * Author: Kevin Hilman, Deep Root Systems, LLC
  *
- * 2007 (c) Deep Root Systems, LLC. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
+ * 2007 (c) Deep Root Systems, LLC.
  */
 
 #include <linux/clk-provider.h>
@@ -24,15 +22,13 @@
 #include <linux/serial_8250.h>
 #include <linux/spi/spi.h>
 
-#include <asm/mach/map.h>
-
-#include <mach/common.h>
-#include <mach/cputype.h>
-#include <mach/mux.h>
-#include <mach/serial.h>
-
 #include <clocksource/timer-davinci.h>
 
+#include <asm/mach/map.h>
+
+#include "common.h"
+#include "cputype.h"
+#include "serial.h"
 #include "asp.h"
 #include "davinci.h"
 #include "irqs.h"
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index c1e0d46996e4..7538bb87f373 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -1,16 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * TI DaVinci DM365 chip specific setup
  *
  * Copyright (C) 2009 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/clk-provider.h>
@@ -29,15 +21,13 @@
 #include <linux/serial_8250.h>
 #include <linux/spi/spi.h>
 
-#include <asm/mach/map.h>
-
-#include <mach/common.h>
-#include <mach/cputype.h>
-#include <mach/mux.h>
-#include <mach/serial.h>
-
 #include <clocksource/timer-davinci.h>
 
+#include <asm/mach/map.h>
+
+#include "common.h"
+#include "cputype.h"
+#include "serial.h"
 #include "asp.h"
 #include "davinci.h"
 #include "irqs.h"
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
deleted file mode 100644
index 24988939ae46..000000000000
--- a/arch/arm/mach-davinci/dm644x.c
+++ /dev/null
@@ -1,767 +0,0 @@
-/*
- * TI DaVinci DM644x chip specific setup
- *
- * Author: Kevin Hilman, Deep Root Systems, LLC
- *
- * 2007 (c) Deep Root Systems, LLC. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/clk-provider.h>
-#include <linux/clk/davinci.h>
-#include <linux/clkdev.h>
-#include <linux/dmaengine.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irqchip/irq-davinci-aintc.h>
-#include <linux/platform_data/edma.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/common.h>
-#include <mach/cputype.h>
-#include <mach/mux.h>
-#include <mach/serial.h>
-
-#include <clocksource/timer-davinci.h>
-
-#include "asp.h"
-#include "davinci.h"
-#include "irqs.h"
-#include "mux.h"
-
-/*
- * Device specific clocks
- */
-#define DM644X_REF_FREQ		27000000
-
-#define DM644X_EMAC_BASE		0x01c80000
-#define DM644X_EMAC_MDIO_BASE		(DM644X_EMAC_BASE + 0x4000)
-#define DM644X_EMAC_CNTRL_OFFSET	0x0000
-#define DM644X_EMAC_CNTRL_MOD_OFFSET	0x1000
-#define DM644X_EMAC_CNTRL_RAM_OFFSET	0x2000
-#define DM644X_EMAC_CNTRL_RAM_SIZE	0x2000
-
-static struct emac_platform_data dm644x_emac_pdata = {
-	.ctrl_reg_offset	= DM644X_EMAC_CNTRL_OFFSET,
-	.ctrl_mod_reg_offset	= DM644X_EMAC_CNTRL_MOD_OFFSET,
-	.ctrl_ram_offset	= DM644X_EMAC_CNTRL_RAM_OFFSET,
-	.ctrl_ram_size		= DM644X_EMAC_CNTRL_RAM_SIZE,
-	.version		= EMAC_VERSION_1,
-};
-
-static struct resource dm644x_emac_resources[] = {
-	{
-		.start	= DM644X_EMAC_BASE,
-		.end	= DM644X_EMAC_BASE + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start = DAVINCI_INTC_IRQ(IRQ_EMACINT),
-		.end   = DAVINCI_INTC_IRQ(IRQ_EMACINT),
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dm644x_emac_device = {
-       .name		= "davinci_emac",
-       .id		= 1,
-       .dev = {
-	       .platform_data	= &dm644x_emac_pdata,
-       },
-       .num_resources	= ARRAY_SIZE(dm644x_emac_resources),
-       .resource	= dm644x_emac_resources,
-};
-
-static struct resource dm644x_mdio_resources[] = {
-	{
-		.start	= DM644X_EMAC_MDIO_BASE,
-		.end	= DM644X_EMAC_MDIO_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device dm644x_mdio_device = {
-	.name		= "davinci_mdio",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(dm644x_mdio_resources),
-	.resource	= dm644x_mdio_resources,
-};
-
-/*
- * Device specific mux setup
- *
- *	soc	description	mux  mode   mode  mux	 dbg
- *				reg  offset mask  mode
- */
-static const struct mux_config dm644x_pins[] = {
-#ifdef CONFIG_DAVINCI_MUX
-MUX_CFG(DM644X, HDIREN,		0,   16,    1,	  1,	 true)
-MUX_CFG(DM644X, ATAEN,		0,   17,    1,	  1,	 true)
-MUX_CFG(DM644X, ATAEN_DISABLE,	0,   17,    1,	  0,	 true)
-
-MUX_CFG(DM644X, HPIEN_DISABLE,	0,   29,    1,	  0,	 true)
-
-MUX_CFG(DM644X, AEAW,		0,   0,     31,	  31,	 true)
-MUX_CFG(DM644X, AEAW0,		0,   0,     1,	  0,	 true)
-MUX_CFG(DM644X, AEAW1,		0,   1,     1,	  0,	 true)
-MUX_CFG(DM644X, AEAW2,		0,   2,     1,	  0,	 true)
-MUX_CFG(DM644X, AEAW3,		0,   3,     1,	  0,	 true)
-MUX_CFG(DM644X, AEAW4,		0,   4,     1,	  0,	 true)
-
-MUX_CFG(DM644X, MSTK,		1,   9,     1,	  0,	 false)
-
-MUX_CFG(DM644X, I2C,		1,   7,     1,	  1,	 false)
-
-MUX_CFG(DM644X, MCBSP,		1,   10,    1,	  1,	 false)
-
-MUX_CFG(DM644X, UART1,		1,   1,     1,	  1,	 true)
-MUX_CFG(DM644X, UART2,		1,   2,     1,	  1,	 true)
-
-MUX_CFG(DM644X, PWM0,		1,   4,     1,	  1,	 false)
-
-MUX_CFG(DM644X, PWM1,		1,   5,     1,	  1,	 false)
-
-MUX_CFG(DM644X, PWM2,		1,   6,     1,	  1,	 false)
-
-MUX_CFG(DM644X, VLYNQEN,	0,   15,    1,	  1,	 false)
-MUX_CFG(DM644X, VLSCREN,	0,   14,    1,	  1,	 false)
-MUX_CFG(DM644X, VLYNQWD,	0,   12,    3,	  3,	 false)
-
-MUX_CFG(DM644X, EMACEN,		0,   31,    1,	  1,	 true)
-
-MUX_CFG(DM644X, GPIO3V,		0,   31,    1,	  0,	 true)
-
-MUX_CFG(DM644X, GPIO0,		0,   24,    1,	  0,	 true)
-MUX_CFG(DM644X, GPIO3,		0,   25,    1,	  0,	 false)
-MUX_CFG(DM644X, GPIO43_44,	1,   7,     1,	  0,	 false)
-MUX_CFG(DM644X, GPIO46_47,	0,   22,    1,	  0,	 true)
-
-MUX_CFG(DM644X, RGB666,		0,   22,    1,	  1,	 true)
-
-MUX_CFG(DM644X, LOEEN,		0,   24,    1,	  1,	 true)
-MUX_CFG(DM644X, LFLDEN,		0,   25,    1,	  1,	 false)
-#endif
-};
-
-/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
-static u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
-	[IRQ_VDINT0]		= 2,
-	[IRQ_VDINT1]		= 6,
-	[IRQ_VDINT2]		= 6,
-	[IRQ_HISTINT]		= 6,
-	[IRQ_H3AINT]		= 6,
-	[IRQ_PRVUINT]		= 6,
-	[IRQ_RSZINT]		= 6,
-	[7]			= 7,
-	[IRQ_VENCINT]		= 6,
-	[IRQ_ASQINT]		= 6,
-	[IRQ_IMXINT]		= 6,
-	[IRQ_VLCDINT]		= 6,
-	[IRQ_USBINT]		= 4,
-	[IRQ_EMACINT]		= 4,
-	[14]			= 7,
-	[15]			= 7,
-	[IRQ_CCINT0]		= 5,	/* dma */
-	[IRQ_CCERRINT]		= 5,	/* dma */
-	[IRQ_TCERRINT0]		= 5,	/* dma */
-	[IRQ_TCERRINT]		= 5,	/* dma */
-	[IRQ_PSCIN]		= 7,
-	[21]			= 7,
-	[IRQ_IDE]		= 4,
-	[23]			= 7,
-	[IRQ_MBXINT]		= 7,
-	[IRQ_MBRINT]		= 7,
-	[IRQ_MMCINT]		= 7,
-	[IRQ_SDIOINT]		= 7,
-	[28]			= 7,
-	[IRQ_DDRINT]		= 7,
-	[IRQ_AEMIFINT]		= 7,
-	[IRQ_VLQINT]		= 4,
-	[IRQ_TINT0_TINT12]	= 2,	/* clockevent */
-	[IRQ_TINT0_TINT34]	= 2,	/* clocksource */
-	[IRQ_TINT1_TINT12]	= 7,	/* DSP timer */
-	[IRQ_TINT1_TINT34]	= 7,	/* system tick */
-	[IRQ_PWMINT0]		= 7,
-	[IRQ_PWMINT1]		= 7,
-	[IRQ_PWMINT2]		= 7,
-	[IRQ_I2C]		= 3,
-	[IRQ_UARTINT0]		= 3,
-	[IRQ_UARTINT1]		= 3,
-	[IRQ_UARTINT2]		= 3,
-	[IRQ_SPINT0]		= 3,
-	[IRQ_SPINT1]		= 3,
-	[45]			= 7,
-	[IRQ_DSP2ARM0]		= 4,
-	[IRQ_DSP2ARM1]		= 4,
-	[IRQ_GPIO0]		= 7,
-	[IRQ_GPIO1]		= 7,
-	[IRQ_GPIO2]		= 7,
-	[IRQ_GPIO3]		= 7,
-	[IRQ_GPIO4]		= 7,
-	[IRQ_GPIO5]		= 7,
-	[IRQ_GPIO6]		= 7,
-	[IRQ_GPIO7]		= 7,
-	[IRQ_GPIOBNK0]		= 7,
-	[IRQ_GPIOBNK1]		= 7,
-	[IRQ_GPIOBNK2]		= 7,
-	[IRQ_GPIOBNK3]		= 7,
-	[IRQ_GPIOBNK4]		= 7,
-	[IRQ_COMMTX]		= 7,
-	[IRQ_COMMRX]		= 7,
-	[IRQ_EMUINT]		= 7,
-};
-
-/*----------------------------------------------------------------------*/
-
-static s8 queue_priority_mapping[][2] = {
-	/* {event queue no, Priority} */
-	{0, 3},
-	{1, 7},
-	{-1, -1},
-};
-
-static const struct dma_slave_map dm644x_edma_map[] = {
-	{ "davinci-mcbsp", "tx", EDMA_FILTER_PARAM(0, 2) },
-	{ "davinci-mcbsp", "rx", EDMA_FILTER_PARAM(0, 3) },
-	{ "spi_davinci", "tx", EDMA_FILTER_PARAM(0, 16) },
-	{ "spi_davinci", "rx", EDMA_FILTER_PARAM(0, 17) },
-	{ "dm6441-mmc.0", "rx", EDMA_FILTER_PARAM(0, 26) },
-	{ "dm6441-mmc.0", "tx", EDMA_FILTER_PARAM(0, 27) },
-};
-
-static struct edma_soc_info dm644x_edma_pdata = {
-	.queue_priority_mapping	= queue_priority_mapping,
-	.default_queue		= EVENTQ_1,
-	.slave_map		= dm644x_edma_map,
-	.slavecnt		= ARRAY_SIZE(dm644x_edma_map),
-};
-
-static struct resource edma_resources[] = {
-	{
-		.name	= "edma3_cc",
-		.start	= 0x01c00000,
-		.end	= 0x01c00000 + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc0",
-		.start	= 0x01c10000,
-		.end	= 0x01c10000 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc1",
-		.start	= 0x01c10400,
-		.end	= 0x01c10400 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_ccint",
-		.start	= DAVINCI_INTC_IRQ(IRQ_CCINT0),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "edma3_ccerrint",
-		.start	= DAVINCI_INTC_IRQ(IRQ_CCERRINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-	/* not using TC*_ERR */
-};
-
-static const struct platform_device_info dm644x_edma_device __initconst = {
-	.name		= "edma",
-	.id		= 0,
-	.dma_mask	= DMA_BIT_MASK(32),
-	.res		= edma_resources,
-	.num_res	= ARRAY_SIZE(edma_resources),
-	.data		= &dm644x_edma_pdata,
-	.size_data	= sizeof(dm644x_edma_pdata),
-};
-
-/* DM6446 EVM uses ASP0; line-out is a pair of RCA jacks */
-static struct resource dm644x_asp_resources[] = {
-	{
-		.name	= "mpu",
-		.start	= DAVINCI_ASP0_BASE,
-		.end	= DAVINCI_ASP0_BASE + SZ_8K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DAVINCI_DMA_ASP0_TX,
-		.end	= DAVINCI_DMA_ASP0_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	{
-		.start	= DAVINCI_DMA_ASP0_RX,
-		.end	= DAVINCI_DMA_ASP0_RX,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device dm644x_asp_device = {
-	.name		= "davinci-mcbsp",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm644x_asp_resources),
-	.resource	= dm644x_asp_resources,
-};
-
-#define DM644X_VPSS_BASE	0x01c73400
-
-static struct resource dm644x_vpss_resources[] = {
-	{
-		/* VPSS Base address */
-		.name		= "vpss",
-		.start		= DM644X_VPSS_BASE,
-		.end		= DM644X_VPSS_BASE + 0xff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device dm644x_vpss_device = {
-	.name			= "vpss",
-	.id			= -1,
-	.dev.platform_data	= "dm644x_vpss",
-	.num_resources		= ARRAY_SIZE(dm644x_vpss_resources),
-	.resource		= dm644x_vpss_resources,
-};
-
-static struct resource dm644x_vpfe_resources[] = {
-	{
-		.start          = DAVINCI_INTC_IRQ(IRQ_VDINT0),
-		.end            = DAVINCI_INTC_IRQ(IRQ_VDINT0),
-		.flags          = IORESOURCE_IRQ,
-	},
-	{
-		.start          = DAVINCI_INTC_IRQ(IRQ_VDINT1),
-		.end            = DAVINCI_INTC_IRQ(IRQ_VDINT1),
-		.flags          = IORESOURCE_IRQ,
-	},
-};
-
-static u64 dm644x_video_dma_mask = DMA_BIT_MASK(32);
-static struct resource dm644x_ccdc_resource[] = {
-	/* CCDC Base address */
-	{
-		.start          = 0x01c70400,
-		.end            = 0x01c70400 + 0xff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device dm644x_ccdc_dev = {
-	.name           = "dm644x_ccdc",
-	.id             = -1,
-	.num_resources  = ARRAY_SIZE(dm644x_ccdc_resource),
-	.resource       = dm644x_ccdc_resource,
-	.dev = {
-		.dma_mask               = &dm644x_video_dma_mask,
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-	},
-};
-
-static struct platform_device dm644x_vpfe_dev = {
-	.name		= CAPTURE_DRV_NAME,
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm644x_vpfe_resources),
-	.resource	= dm644x_vpfe_resources,
-	.dev = {
-		.dma_mask		= &dm644x_video_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-#define DM644X_OSD_BASE		0x01c72600
-
-static struct resource dm644x_osd_resources[] = {
-	{
-		.start	= DM644X_OSD_BASE,
-		.end	= DM644X_OSD_BASE + 0x1ff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device dm644x_osd_dev = {
-	.name		= DM644X_VPBE_OSD_SUBDEV_NAME,
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm644x_osd_resources),
-	.resource	= dm644x_osd_resources,
-	.dev		= {
-		.dma_mask		= &dm644x_video_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-#define DM644X_VENC_BASE		0x01c72400
-
-static struct resource dm644x_venc_resources[] = {
-	{
-		.start	= DM644X_VENC_BASE,
-		.end	= DM644X_VENC_BASE + 0x17f,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-#define DM644X_VPSS_MUXSEL_PLL2_MODE          BIT(0)
-#define DM644X_VPSS_MUXSEL_VPBECLK_MODE       BIT(1)
-#define DM644X_VPSS_VENCLKEN                  BIT(3)
-#define DM644X_VPSS_DACCLKEN                  BIT(4)
-
-static int dm644x_venc_setup_clock(enum vpbe_enc_timings_type type,
-				   unsigned int pclock)
-{
-	int ret = 0;
-	u32 v = DM644X_VPSS_VENCLKEN;
-
-	switch (type) {
-	case VPBE_ENC_STD:
-		v |= DM644X_VPSS_DACCLKEN;
-		writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL));
-		break;
-	case VPBE_ENC_DV_TIMINGS:
-		if (pclock <= 27000000) {
-			v |= DM644X_VPSS_DACCLKEN;
-			writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL));
-		} else {
-			/*
-			 * For HD, use external clock source since
-			 * HD requires higher clock rate
-			 */
-			v |= DM644X_VPSS_MUXSEL_VPBECLK_MODE;
-			writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL));
-		}
-		break;
-	default:
-		ret  = -EINVAL;
-	}
-
-	return ret;
-}
-
-static struct resource dm644x_v4l2_disp_resources[] = {
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_VENCINT),
-		.end	= DAVINCI_INTC_IRQ(IRQ_VENCINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dm644x_vpbe_display = {
-	.name		= "vpbe-v4l2",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm644x_v4l2_disp_resources),
-	.resource	= dm644x_v4l2_disp_resources,
-	.dev		= {
-		.dma_mask		= &dm644x_video_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-static struct venc_platform_data dm644x_venc_pdata = {
-	.setup_clock	= dm644x_venc_setup_clock,
-};
-
-static struct platform_device dm644x_venc_dev = {
-	.name		= DM644X_VPBE_VENC_SUBDEV_NAME,
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm644x_venc_resources),
-	.resource	= dm644x_venc_resources,
-	.dev		= {
-		.dma_mask		= &dm644x_video_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= &dm644x_venc_pdata,
-	},
-};
-
-static struct platform_device dm644x_vpbe_dev = {
-	.name		= "vpbe_controller",
-	.id		= -1,
-	.dev		= {
-		.dma_mask		= &dm644x_video_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-static struct resource dm644_gpio_resources[] = {
-	{	/* registers */
-		.start	= DAVINCI_GPIO_BASE,
-		.end	= DAVINCI_GPIO_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{	/* interrupt */
-		.start	= DAVINCI_INTC_IRQ(IRQ_GPIOBNK0),
-		.end	= DAVINCI_INTC_IRQ(IRQ_GPIOBNK0),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_GPIOBNK1),
-		.end	= DAVINCI_INTC_IRQ(IRQ_GPIOBNK1),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_GPIOBNK2),
-		.end	= DAVINCI_INTC_IRQ(IRQ_GPIOBNK2),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_GPIOBNK3),
-		.end	= DAVINCI_INTC_IRQ(IRQ_GPIOBNK3),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_GPIOBNK4),
-		.end	= DAVINCI_INTC_IRQ(IRQ_GPIOBNK4),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct davinci_gpio_platform_data dm644_gpio_platform_data = {
-	.no_auto_base	= true,
-	.base		= 0,
-	.ngpio		= 71,
-};
-
-int __init dm644x_gpio_register(void)
-{
-	return davinci_gpio_register(dm644_gpio_resources,
-				     ARRAY_SIZE(dm644_gpio_resources),
-				     &dm644_gpio_platform_data);
-}
-/*----------------------------------------------------------------------*/
-
-static struct map_desc dm644x_io_desc[] = {
-	{
-		.virtual	= IO_VIRT,
-		.pfn		= __phys_to_pfn(IO_PHYS),
-		.length		= IO_SIZE,
-		.type		= MT_DEVICE
-	},
-};
-
-/* Contents of JTAG ID register used to identify exact cpu type */
-static struct davinci_id dm644x_ids[] = {
-	{
-		.variant	= 0x0,
-		.part_no	= 0xb700,
-		.manufacturer	= 0x017,
-		.cpu_id		= DAVINCI_CPU_ID_DM6446,
-		.name		= "dm6446",
-	},
-	{
-		.variant	= 0x1,
-		.part_no	= 0xb700,
-		.manufacturer	= 0x017,
-		.cpu_id		= DAVINCI_CPU_ID_DM6446,
-		.name		= "dm6446a",
-	},
-};
-
-/*
- * Bottom half of timer0 is used for clockevent, top half is used for
- * clocksource.
- */
-static const struct davinci_timer_cfg dm644x_timer_cfg = {
-	.reg = DEFINE_RES_IO(DAVINCI_TIMER0_BASE, SZ_4K),
-	.irq = {
-		DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT12)),
-		DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT34)),
-	},
-};
-
-static struct plat_serial8250_port dm644x_serial0_platform_data[] = {
-	{
-		.mapbase	= DAVINCI_UART0_BASE,
-		.irq		= DAVINCI_INTC_IRQ(IRQ_UARTINT0),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	}
-};
-static struct plat_serial8250_port dm644x_serial1_platform_data[] = {
-	{
-		.mapbase	= DAVINCI_UART1_BASE,
-		.irq		= DAVINCI_INTC_IRQ(IRQ_UARTINT1),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	}
-};
-static struct plat_serial8250_port dm644x_serial2_platform_data[] = {
-	{
-		.mapbase	= DAVINCI_UART2_BASE,
-		.irq		= DAVINCI_INTC_IRQ(IRQ_UARTINT2),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	}
-};
-
-struct platform_device dm644x_serial_device[] = {
-	{
-		.name			= "serial8250",
-		.id			= PLAT8250_DEV_PLATFORM,
-		.dev			= {
-			.platform_data	= dm644x_serial0_platform_data,
-		}
-	},
-	{
-		.name			= "serial8250",
-		.id			= PLAT8250_DEV_PLATFORM1,
-		.dev			= {
-			.platform_data	= dm644x_serial1_platform_data,
-		}
-	},
-	{
-		.name			= "serial8250",
-		.id			= PLAT8250_DEV_PLATFORM2,
-		.dev			= {
-			.platform_data	= dm644x_serial2_platform_data,
-		}
-	},
-	{
-	}
-};
-
-static const struct davinci_soc_info davinci_soc_info_dm644x = {
-	.io_desc		= dm644x_io_desc,
-	.io_desc_num		= ARRAY_SIZE(dm644x_io_desc),
-	.jtag_id_reg		= 0x01c40028,
-	.ids			= dm644x_ids,
-	.ids_num		= ARRAY_SIZE(dm644x_ids),
-	.pinmux_base		= DAVINCI_SYSTEM_MODULE_BASE,
-	.pinmux_pins		= dm644x_pins,
-	.pinmux_pins_num	= ARRAY_SIZE(dm644x_pins),
-	.emac_pdata		= &dm644x_emac_pdata,
-	.sram_dma		= 0x00008000,
-	.sram_len		= SZ_16K,
-};
-
-void __init dm644x_init_asp(void)
-{
-	davinci_cfg_reg(DM644X_MCBSP);
-	platform_device_register(&dm644x_asp_device);
-}
-
-void __init dm644x_init(void)
-{
-	davinci_common_init(&davinci_soc_info_dm644x);
-	davinci_map_sysmod();
-}
-
-void __init dm644x_init_time(void)
-{
-	void __iomem *pll1, *psc;
-	struct clk *clk;
-	int rv;
-
-	clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DM644X_REF_FREQ);
-
-	pll1 = ioremap(DAVINCI_PLL1_BASE, SZ_1K);
-	dm644x_pll1_init(NULL, pll1, NULL);
-
-	psc = ioremap(DAVINCI_PWR_SLEEP_CNTRL_BASE, SZ_4K);
-	dm644x_psc_init(NULL, psc);
-
-	clk = clk_get(NULL, "timer0");
-	if (WARN_ON(IS_ERR(clk))) {
-		pr_err("Unable to get the timer clock\n");
-		return;
-	}
-
-	rv = davinci_timer_register(clk, &dm644x_timer_cfg);
-	WARN(rv, "Unable to register the timer: %d\n", rv);
-}
-
-static struct resource dm644x_pll2_resources[] = {
-	{
-		.start	= DAVINCI_PLL2_BASE,
-		.end	= DAVINCI_PLL2_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device dm644x_pll2_device = {
-	.name		= "dm644x-pll2",
-	.id		= -1,
-	.resource	= dm644x_pll2_resources,
-	.num_resources	= ARRAY_SIZE(dm644x_pll2_resources),
-};
-
-void __init dm644x_register_clocks(void)
-{
-	/* PLL1 and PSC are registered in dm644x_init_time() */
-	platform_device_register(&dm644x_pll2_device);
-}
-
-int __init dm644x_init_video(struct vpfe_config *vpfe_cfg,
-				struct vpbe_config *vpbe_cfg)
-{
-	if (vpfe_cfg || vpbe_cfg)
-		platform_device_register(&dm644x_vpss_device);
-
-	if (vpfe_cfg) {
-		dm644x_vpfe_dev.dev.platform_data = vpfe_cfg;
-		platform_device_register(&dm644x_ccdc_dev);
-		platform_device_register(&dm644x_vpfe_dev);
-	}
-
-	if (vpbe_cfg) {
-		dm644x_vpbe_dev.dev.platform_data = vpbe_cfg;
-		platform_device_register(&dm644x_osd_dev);
-		platform_device_register(&dm644x_venc_dev);
-		platform_device_register(&dm644x_vpbe_dev);
-		platform_device_register(&dm644x_vpbe_display);
-	}
-
-	return 0;
-}
-
-static const struct davinci_aintc_config dm644x_aintc_config = {
-	.reg = {
-		.start		= DAVINCI_ARM_INTC_BASE,
-		.end		= DAVINCI_ARM_INTC_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	.num_irqs		= 64,
-	.prios			= dm644x_default_priorities,
-};
-
-void __init dm644x_init_irq(void)
-{
-	davinci_aintc_init(&dm644x_aintc_config);
-}
-
-void __init dm644x_init_devices(void)
-{
-	struct platform_device *edma_pdev;
-	int ret;
-
-	edma_pdev = platform_device_register_full(&dm644x_edma_device);
-	if (IS_ERR(edma_pdev))
-		pr_warn("%s: Failed to register eDMA\n", __func__);
-
-	platform_device_register(&dm644x_mdio_device);
-	platform_device_register(&dm644x_emac_device);
-
-	ret = davinci_init_wdt();
-	if (ret)
-		pr_warn("%s: watchdog init failed: %d\n", __func__, ret);
-
-}
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
deleted file mode 100644
index 4ffd028ed997..000000000000
--- a/arch/arm/mach-davinci/dm646x.c
+++ /dev/null
@@ -1,728 +0,0 @@
-/*
- * TI DaVinci DM646x chip specific setup
- *
- * Author: Kevin Hilman, Deep Root Systems, LLC
- *
- * 2007 (c) Deep Root Systems, LLC. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/clk-provider.h>
-#include <linux/clk/davinci.h>
-#include <linux/clkdev.h>
-#include <linux/dma-mapping.h>
-#include <linux/dmaengine.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irqchip/irq-davinci-aintc.h>
-#include <linux/platform_data/edma.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/common.h>
-#include <mach/cputype.h>
-#include <mach/mux.h>
-#include <mach/serial.h>
-
-#include <clocksource/timer-davinci.h>
-
-#include "asp.h"
-#include "davinci.h"
-#include "irqs.h"
-#include "mux.h"
-
-#define DAVINCI_VPIF_BASE       (0x01C12000)
-
-#define VDD3P3V_VID_MASK	(BIT_MASK(3) | BIT_MASK(2) | BIT_MASK(1) |\
-					BIT_MASK(0))
-#define VSCLKDIS_MASK		(BIT_MASK(11) | BIT_MASK(10) | BIT_MASK(9) |\
-					BIT_MASK(8))
-
-#define DM646X_EMAC_BASE		0x01c80000
-#define DM646X_EMAC_MDIO_BASE		(DM646X_EMAC_BASE + 0x4000)
-#define DM646X_EMAC_CNTRL_OFFSET	0x0000
-#define DM646X_EMAC_CNTRL_MOD_OFFSET	0x1000
-#define DM646X_EMAC_CNTRL_RAM_OFFSET	0x2000
-#define DM646X_EMAC_CNTRL_RAM_SIZE	0x2000
-
-static struct emac_platform_data dm646x_emac_pdata = {
-	.ctrl_reg_offset	= DM646X_EMAC_CNTRL_OFFSET,
-	.ctrl_mod_reg_offset	= DM646X_EMAC_CNTRL_MOD_OFFSET,
-	.ctrl_ram_offset	= DM646X_EMAC_CNTRL_RAM_OFFSET,
-	.ctrl_ram_size		= DM646X_EMAC_CNTRL_RAM_SIZE,
-	.version		= EMAC_VERSION_2,
-};
-
-static struct resource dm646x_emac_resources[] = {
-	{
-		.start	= DM646X_EMAC_BASE,
-		.end	= DM646X_EMAC_BASE + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM646X_EMACRXTHINT),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM646X_EMACRXTHINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM646X_EMACRXINT),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM646X_EMACRXINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM646X_EMACTXINT),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM646X_EMACTXINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM646X_EMACMISCINT),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM646X_EMACMISCINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dm646x_emac_device = {
-	.name		= "davinci_emac",
-	.id		= 1,
-	.dev = {
-		.platform_data	= &dm646x_emac_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(dm646x_emac_resources),
-	.resource	= dm646x_emac_resources,
-};
-
-static struct resource dm646x_mdio_resources[] = {
-	{
-		.start	= DM646X_EMAC_MDIO_BASE,
-		.end	= DM646X_EMAC_MDIO_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device dm646x_mdio_device = {
-	.name		= "davinci_mdio",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(dm646x_mdio_resources),
-	.resource	= dm646x_mdio_resources,
-};
-
-/*
- * Device specific mux setup
- *
- *	soc	description	mux  mode   mode  mux	 dbg
- *				reg  offset mask  mode
- */
-static const struct mux_config dm646x_pins[] = {
-#ifdef CONFIG_DAVINCI_MUX
-MUX_CFG(DM646X, ATAEN,		0,   0,     5,	  1,	 true)
-
-MUX_CFG(DM646X, AUDCK1,		0,   29,    1,	  0,	 false)
-
-MUX_CFG(DM646X, AUDCK0,		0,   28,    1,	  0,	 false)
-
-MUX_CFG(DM646X, CRGMUX,			0,   24,    7,    5,	 true)
-
-MUX_CFG(DM646X, STSOMUX_DISABLE,	0,   22,    3,    0,	 true)
-
-MUX_CFG(DM646X, STSIMUX_DISABLE,	0,   20,    3,    0,	 true)
-
-MUX_CFG(DM646X, PTSOMUX_DISABLE,	0,   18,    3,    0,	 true)
-
-MUX_CFG(DM646X, PTSIMUX_DISABLE,	0,   16,    3,    0,	 true)
-
-MUX_CFG(DM646X, STSOMUX,		0,   22,    3,    2,	 true)
-
-MUX_CFG(DM646X, STSIMUX,		0,   20,    3,    2,	 true)
-
-MUX_CFG(DM646X, PTSOMUX_PARALLEL,	0,   18,    3,    2,	 true)
-
-MUX_CFG(DM646X, PTSIMUX_PARALLEL,	0,   16,    3,    2,	 true)
-
-MUX_CFG(DM646X, PTSOMUX_SERIAL,		0,   18,    3,    3,	 true)
-
-MUX_CFG(DM646X, PTSIMUX_SERIAL,		0,   16,    3,    3,	 true)
-#endif
-};
-
-static u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
-	[IRQ_DM646X_VP_VERTINT0]        = 7,
-	[IRQ_DM646X_VP_VERTINT1]        = 7,
-	[IRQ_DM646X_VP_VERTINT2]        = 7,
-	[IRQ_DM646X_VP_VERTINT3]        = 7,
-	[IRQ_DM646X_VP_ERRINT]          = 7,
-	[IRQ_DM646X_RESERVED_1]         = 7,
-	[IRQ_DM646X_RESERVED_2]         = 7,
-	[IRQ_DM646X_WDINT]              = 7,
-	[IRQ_DM646X_CRGENINT0]          = 7,
-	[IRQ_DM646X_CRGENINT1]          = 7,
-	[IRQ_DM646X_TSIFINT0]           = 7,
-	[IRQ_DM646X_TSIFINT1]           = 7,
-	[IRQ_DM646X_VDCEINT]            = 7,
-	[IRQ_DM646X_USBINT]             = 7,
-	[IRQ_DM646X_USBDMAINT]          = 7,
-	[IRQ_DM646X_PCIINT]             = 7,
-	[IRQ_CCINT0]                    = 7,    /* dma */
-	[IRQ_CCERRINT]                  = 7,    /* dma */
-	[IRQ_TCERRINT0]                 = 7,    /* dma */
-	[IRQ_TCERRINT]                  = 7,    /* dma */
-	[IRQ_DM646X_TCERRINT2]          = 7,
-	[IRQ_DM646X_TCERRINT3]          = 7,
-	[IRQ_DM646X_IDE]                = 7,
-	[IRQ_DM646X_HPIINT]             = 7,
-	[IRQ_DM646X_EMACRXTHINT]        = 7,
-	[IRQ_DM646X_EMACRXINT]          = 7,
-	[IRQ_DM646X_EMACTXINT]          = 7,
-	[IRQ_DM646X_EMACMISCINT]        = 7,
-	[IRQ_DM646X_MCASP0TXINT]        = 7,
-	[IRQ_DM646X_MCASP0RXINT]        = 7,
-	[IRQ_DM646X_RESERVED_3]         = 7,
-	[IRQ_DM646X_MCASP1TXINT]        = 7,
-	[IRQ_TINT0_TINT12]              = 7,    /* clockevent */
-	[IRQ_TINT0_TINT34]              = 7,    /* clocksource */
-	[IRQ_TINT1_TINT12]              = 7,    /* DSP timer */
-	[IRQ_TINT1_TINT34]              = 7,    /* system tick */
-	[IRQ_PWMINT0]                   = 7,
-	[IRQ_PWMINT1]                   = 7,
-	[IRQ_DM646X_VLQINT]             = 7,
-	[IRQ_I2C]                       = 7,
-	[IRQ_UARTINT0]                  = 7,
-	[IRQ_UARTINT1]                  = 7,
-	[IRQ_DM646X_UARTINT2]           = 7,
-	[IRQ_DM646X_SPINT0]             = 7,
-	[IRQ_DM646X_SPINT1]             = 7,
-	[IRQ_DM646X_DSP2ARMINT]         = 7,
-	[IRQ_DM646X_RESERVED_4]         = 7,
-	[IRQ_DM646X_PSCINT]             = 7,
-	[IRQ_DM646X_GPIO0]              = 7,
-	[IRQ_DM646X_GPIO1]              = 7,
-	[IRQ_DM646X_GPIO2]              = 7,
-	[IRQ_DM646X_GPIO3]              = 7,
-	[IRQ_DM646X_GPIO4]              = 7,
-	[IRQ_DM646X_GPIO5]              = 7,
-	[IRQ_DM646X_GPIO6]              = 7,
-	[IRQ_DM646X_GPIO7]              = 7,
-	[IRQ_DM646X_GPIOBNK0]           = 7,
-	[IRQ_DM646X_GPIOBNK1]           = 7,
-	[IRQ_DM646X_GPIOBNK2]           = 7,
-	[IRQ_DM646X_DDRINT]             = 7,
-	[IRQ_DM646X_AEMIFINT]           = 7,
-	[IRQ_COMMTX]                    = 7,
-	[IRQ_COMMRX]                    = 7,
-	[IRQ_EMUINT]                    = 7,
-};
-
-/*----------------------------------------------------------------------*/
-
-/* Four Transfer Controllers on DM646x */
-static s8 dm646x_queue_priority_mapping[][2] = {
-	/* {event queue no, Priority} */
-	{0, 4},
-	{1, 0},
-	{2, 5},
-	{3, 1},
-	{-1, -1},
-};
-
-static const struct dma_slave_map dm646x_edma_map[] = {
-	{ "davinci-mcasp.0", "tx", EDMA_FILTER_PARAM(0, 6) },
-	{ "davinci-mcasp.0", "rx", EDMA_FILTER_PARAM(0, 9) },
-	{ "davinci-mcasp.1", "tx", EDMA_FILTER_PARAM(0, 12) },
-	{ "spi_davinci", "tx", EDMA_FILTER_PARAM(0, 16) },
-	{ "spi_davinci", "rx", EDMA_FILTER_PARAM(0, 17) },
-};
-
-static struct edma_soc_info dm646x_edma_pdata = {
-	.queue_priority_mapping	= dm646x_queue_priority_mapping,
-	.default_queue		= EVENTQ_1,
-	.slave_map		= dm646x_edma_map,
-	.slavecnt		= ARRAY_SIZE(dm646x_edma_map),
-};
-
-static struct resource edma_resources[] = {
-	{
-		.name	= "edma3_cc",
-		.start	= 0x01c00000,
-		.end	= 0x01c00000 + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc0",
-		.start	= 0x01c10000,
-		.end	= 0x01c10000 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc1",
-		.start	= 0x01c10400,
-		.end	= 0x01c10400 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc2",
-		.start	= 0x01c10800,
-		.end	= 0x01c10800 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc3",
-		.start	= 0x01c10c00,
-		.end	= 0x01c10c00 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_ccint",
-		.start	= DAVINCI_INTC_IRQ(IRQ_CCINT0),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "edma3_ccerrint",
-		.start	= DAVINCI_INTC_IRQ(IRQ_CCERRINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-	/* not using TC*_ERR */
-};
-
-static const struct platform_device_info dm646x_edma_device __initconst = {
-	.name		= "edma",
-	.id		= 0,
-	.dma_mask	= DMA_BIT_MASK(32),
-	.res		= edma_resources,
-	.num_res	= ARRAY_SIZE(edma_resources),
-	.data		= &dm646x_edma_pdata,
-	.size_data	= sizeof(dm646x_edma_pdata),
-};
-
-static struct resource dm646x_mcasp0_resources[] = {
-	{
-		.name	= "mpu",
-		.start 	= DAVINCI_DM646X_MCASP0_REG_BASE,
-		.end 	= DAVINCI_DM646X_MCASP0_REG_BASE + (SZ_1K << 1) - 1,
-		.flags 	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "tx",
-		.start	= DAVINCI_DM646X_DMA_MCASP0_AXEVT0,
-		.end	= DAVINCI_DM646X_DMA_MCASP0_AXEVT0,
-		.flags	= IORESOURCE_DMA,
-	},
-	{
-		.name	= "rx",
-		.start	= DAVINCI_DM646X_DMA_MCASP0_AREVT0,
-		.end	= DAVINCI_DM646X_DMA_MCASP0_AREVT0,
-		.flags	= IORESOURCE_DMA,
-	},
-	{
-		.name	= "tx",
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM646X_MCASP0TXINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "rx",
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM646X_MCASP0RXINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-/* DIT mode only, rx is not supported */
-static struct resource dm646x_mcasp1_resources[] = {
-	{
-		.name	= "mpu",
-		.start	= DAVINCI_DM646X_MCASP1_REG_BASE,
-		.end	= DAVINCI_DM646X_MCASP1_REG_BASE + (SZ_1K << 1) - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "tx",
-		.start	= DAVINCI_DM646X_DMA_MCASP1_AXEVT1,
-		.end	= DAVINCI_DM646X_DMA_MCASP1_AXEVT1,
-		.flags	= IORESOURCE_DMA,
-	},
-	{
-		.name	= "tx",
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM646X_MCASP1TXINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dm646x_mcasp0_device = {
-	.name		= "davinci-mcasp",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(dm646x_mcasp0_resources),
-	.resource	= dm646x_mcasp0_resources,
-};
-
-static struct platform_device dm646x_mcasp1_device = {
-	.name		= "davinci-mcasp",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(dm646x_mcasp1_resources),
-	.resource	= dm646x_mcasp1_resources,
-};
-
-static struct platform_device dm646x_dit_device = {
-	.name	= "spdif-dit",
-	.id	= -1,
-};
-
-static u64 vpif_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource vpif_resource[] = {
-	{
-		.start	= DAVINCI_VPIF_BASE,
-		.end	= DAVINCI_VPIF_BASE + 0x03ff,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device vpif_dev = {
-	.name		= "vpif",
-	.id		= -1,
-	.dev		= {
-			.dma_mask 		= &vpif_dma_mask,
-			.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= vpif_resource,
-	.num_resources	= ARRAY_SIZE(vpif_resource),
-};
-
-static struct resource vpif_display_resource[] = {
-	{
-		.start = DAVINCI_INTC_IRQ(IRQ_DM646X_VP_VERTINT2),
-		.end   = DAVINCI_INTC_IRQ(IRQ_DM646X_VP_VERTINT2),
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = DAVINCI_INTC_IRQ(IRQ_DM646X_VP_VERTINT3),
-		.end   = DAVINCI_INTC_IRQ(IRQ_DM646X_VP_VERTINT3),
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device vpif_display_dev = {
-	.name		= "vpif_display",
-	.id		= -1,
-	.dev		= {
-			.dma_mask 		= &vpif_dma_mask,
-			.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= vpif_display_resource,
-	.num_resources	= ARRAY_SIZE(vpif_display_resource),
-};
-
-static struct resource vpif_capture_resource[] = {
-	{
-		.start = DAVINCI_INTC_IRQ(IRQ_DM646X_VP_VERTINT0),
-		.end   = DAVINCI_INTC_IRQ(IRQ_DM646X_VP_VERTINT0),
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = DAVINCI_INTC_IRQ(IRQ_DM646X_VP_VERTINT1),
-		.end   = DAVINCI_INTC_IRQ(IRQ_DM646X_VP_VERTINT1),
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device vpif_capture_dev = {
-	.name		= "vpif_capture",
-	.id		= -1,
-	.dev		= {
-			.dma_mask 		= &vpif_dma_mask,
-			.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= vpif_capture_resource,
-	.num_resources	= ARRAY_SIZE(vpif_capture_resource),
-};
-
-static struct resource dm646x_gpio_resources[] = {
-	{	/* registers */
-		.start	= DAVINCI_GPIO_BASE,
-		.end	= DAVINCI_GPIO_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{	/* interrupt */
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM646X_GPIOBNK0),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM646X_GPIOBNK0),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM646X_GPIOBNK1),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM646X_GPIOBNK1),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM646X_GPIOBNK2),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM646X_GPIOBNK2),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct davinci_gpio_platform_data dm646x_gpio_platform_data = {
-	.no_auto_base	= true,
-	.base		= 0,
-	.ngpio		= 43,
-};
-
-int __init dm646x_gpio_register(void)
-{
-	return davinci_gpio_register(dm646x_gpio_resources,
-				     ARRAY_SIZE(dm646x_gpio_resources),
-				     &dm646x_gpio_platform_data);
-}
-/*----------------------------------------------------------------------*/
-
-static struct map_desc dm646x_io_desc[] = {
-	{
-		.virtual	= IO_VIRT,
-		.pfn		= __phys_to_pfn(IO_PHYS),
-		.length		= IO_SIZE,
-		.type		= MT_DEVICE
-	},
-};
-
-/* Contents of JTAG ID register used to identify exact cpu type */
-static struct davinci_id dm646x_ids[] = {
-	{
-		.variant	= 0x0,
-		.part_no	= 0xb770,
-		.manufacturer	= 0x017,
-		.cpu_id		= DAVINCI_CPU_ID_DM6467,
-		.name		= "dm6467_rev1.x",
-	},
-	{
-		.variant	= 0x1,
-		.part_no	= 0xb770,
-		.manufacturer	= 0x017,
-		.cpu_id		= DAVINCI_CPU_ID_DM6467,
-		.name		= "dm6467_rev3.x",
-	},
-};
-
-/*
- * Bottom half of timer0 is used for clockevent, top half is used for
- * clocksource.
- */
-static const struct davinci_timer_cfg dm646x_timer_cfg = {
-	.reg = DEFINE_RES_IO(DAVINCI_TIMER0_BASE, SZ_4K),
-	.irq = {
-		DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT12)),
-		DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT34)),
-	},
-};
-
-static struct plat_serial8250_port dm646x_serial0_platform_data[] = {
-	{
-		.mapbase	= DAVINCI_UART0_BASE,
-		.irq		= DAVINCI_INTC_IRQ(IRQ_UARTINT0),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM32,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	}
-};
-static struct plat_serial8250_port dm646x_serial1_platform_data[] = {
-	{
-		.mapbase	= DAVINCI_UART1_BASE,
-		.irq		= DAVINCI_INTC_IRQ(IRQ_UARTINT1),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM32,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	}
-};
-static struct plat_serial8250_port dm646x_serial2_platform_data[] = {
-	{
-		.mapbase	= DAVINCI_UART2_BASE,
-		.irq		= DAVINCI_INTC_IRQ(IRQ_DM646X_UARTINT2),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM32,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	}
-};
-
-struct platform_device dm646x_serial_device[] = {
-	{
-		.name			= "serial8250",
-		.id			= PLAT8250_DEV_PLATFORM,
-		.dev			= {
-			.platform_data	= dm646x_serial0_platform_data,
-		}
-	},
-	{
-		.name			= "serial8250",
-		.id			= PLAT8250_DEV_PLATFORM1,
-		.dev			= {
-			.platform_data	= dm646x_serial1_platform_data,
-		}
-	},
-	{
-		.name			= "serial8250",
-		.id			= PLAT8250_DEV_PLATFORM2,
-		.dev			= {
-			.platform_data	= dm646x_serial2_platform_data,
-		}
-	},
-	{
-	}
-};
-
-static const struct davinci_soc_info davinci_soc_info_dm646x = {
-	.io_desc		= dm646x_io_desc,
-	.io_desc_num		= ARRAY_SIZE(dm646x_io_desc),
-	.jtag_id_reg		= 0x01c40028,
-	.ids			= dm646x_ids,
-	.ids_num		= ARRAY_SIZE(dm646x_ids),
-	.pinmux_base		= DAVINCI_SYSTEM_MODULE_BASE,
-	.pinmux_pins		= dm646x_pins,
-	.pinmux_pins_num	= ARRAY_SIZE(dm646x_pins),
-	.emac_pdata		= &dm646x_emac_pdata,
-	.sram_dma		= 0x10010000,
-	.sram_len		= SZ_32K,
-};
-
-void __init dm646x_init_mcasp0(struct snd_platform_data *pdata)
-{
-	dm646x_mcasp0_device.dev.platform_data = pdata;
-	platform_device_register(&dm646x_mcasp0_device);
-}
-
-void __init dm646x_init_mcasp1(struct snd_platform_data *pdata)
-{
-	dm646x_mcasp1_device.dev.platform_data = pdata;
-	platform_device_register(&dm646x_mcasp1_device);
-	platform_device_register(&dm646x_dit_device);
-}
-
-void dm646x_setup_vpif(struct vpif_display_config *display_config,
-		       struct vpif_capture_config *capture_config)
-{
-	unsigned int value;
-
-	value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS));
-	value &= ~VSCLKDIS_MASK;
-	__raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS));
-
-	value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VDD3P3VPWDN));
-	value &= ~VDD3P3V_VID_MASK;
-	__raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VDD3P3VPWDN));
-
-	davinci_cfg_reg(DM646X_STSOMUX_DISABLE);
-	davinci_cfg_reg(DM646X_STSIMUX_DISABLE);
-	davinci_cfg_reg(DM646X_PTSOMUX_DISABLE);
-	davinci_cfg_reg(DM646X_PTSIMUX_DISABLE);
-
-	vpif_display_dev.dev.platform_data = display_config;
-	vpif_capture_dev.dev.platform_data = capture_config;
-	platform_device_register(&vpif_dev);
-	platform_device_register(&vpif_display_dev);
-	platform_device_register(&vpif_capture_dev);
-}
-
-int __init dm646x_init_edma(struct edma_rsv_info *rsv)
-{
-	struct platform_device *edma_pdev;
-
-	dm646x_edma_pdata.rsv = rsv;
-
-	edma_pdev = platform_device_register_full(&dm646x_edma_device);
-	return PTR_ERR_OR_ZERO(edma_pdev);
-}
-
-void __init dm646x_init(void)
-{
-	davinci_common_init(&davinci_soc_info_dm646x);
-	davinci_map_sysmod();
-}
-
-void __init dm646x_init_time(unsigned long ref_clk_rate,
-			     unsigned long aux_clkin_rate)
-{
-	void __iomem *pll1, *psc;
-	struct clk *clk;
-	int rv;
-
-	clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, ref_clk_rate);
-	clk_register_fixed_rate(NULL, "aux_clkin", NULL, 0, aux_clkin_rate);
-
-	pll1 = ioremap(DAVINCI_PLL1_BASE, SZ_1K);
-	dm646x_pll1_init(NULL, pll1, NULL);
-
-	psc = ioremap(DAVINCI_PWR_SLEEP_CNTRL_BASE, SZ_4K);
-	dm646x_psc_init(NULL, psc);
-
-	clk = clk_get(NULL, "timer0");
-	if (WARN_ON(IS_ERR(clk))) {
-		pr_err("Unable to get the timer clock\n");
-		return;
-	}
-
-	rv = davinci_timer_register(clk, &dm646x_timer_cfg);
-	WARN(rv, "Unable to register the timer: %d\n", rv);
-}
-
-static struct resource dm646x_pll2_resources[] = {
-	{
-		.start	= DAVINCI_PLL2_BASE,
-		.end	= DAVINCI_PLL2_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device dm646x_pll2_device = {
-	.name		= "dm646x-pll2",
-	.id		= -1,
-	.resource	= dm646x_pll2_resources,
-	.num_resources	= ARRAY_SIZE(dm646x_pll2_resources),
-};
-
-void __init dm646x_register_clocks(void)
-{
-	/* PLL1 and PSC are registered in dm646x_init_time() */
-	platform_device_register(&dm646x_pll2_device);
-}
-
-static const struct davinci_aintc_config dm646x_aintc_config = {
-	.reg = {
-		.start		= DAVINCI_ARM_INTC_BASE,
-		.end		= DAVINCI_ARM_INTC_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	.num_irqs		= 64,
-	.prios			= dm646x_default_priorities,
-};
-
-void __init dm646x_init_irq(void)
-{
-	davinci_aintc_init(&dm646x_aintc_config);
-}
-
-static int __init dm646x_init_devices(void)
-{
-	int ret = 0;
-
-	if (!cpu_is_davinci_dm646x())
-		return 0;
-
-	platform_device_register(&dm646x_mdio_device);
-	platform_device_register(&dm646x_emac_device);
-
-	ret = davinci_init_wdt();
-	if (ret)
-		pr_warn("%s: watchdog init failed: %d\n", __func__, ret);
-
-	return ret;
-}
-postcore_initcall(dm646x_init_devices);
diff --git a/arch/arm/mach-davinci/include/mach/hardware.h b/arch/arm/mach-davinci/hardware.h
index 16bb42291d39..7848b6a240b4 100644
--- a/arch/arm/mach-davinci/include/mach/hardware.h
+++ b/arch/arm/mach-davinci/hardware.h
@@ -1,12 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Hardware definitions common to all DaVinci family processors
  *
  * Author: Kevin Hilman, Deep Root Systems, LLC
  *
- * 2007 (c) Deep Root Systems, LLC. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
+ * 2007 (c) Deep Root Systems, LLC.
  */
 #ifndef __ASM_ARCH_HARDWARE_H
 #define __ASM_ARCH_HARDWARE_H
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
deleted file mode 100644
index 631655e68ae0..000000000000
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ /dev/null
@@ -1,990 +0,0 @@
-/*
- * Table of the DAVINCI register configurations for the PINMUX combinations
- *
- * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
- *
- * Based on linux/include/asm-arm/arch-omap/mux.h:
- * Copyright (C) 2003 - 2005 Nokia Corporation
- *
- * Written by Tony Lindgren
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Copyright (C) 2008 Texas Instruments.
- */
-
-#ifndef __INC_MACH_MUX_H
-#define __INC_MACH_MUX_H
-
-struct mux_config {
-	const char *name;
-	const char *mux_reg_name;
-	const unsigned char mux_reg;
-	const unsigned char mask_offset;
-	const unsigned char mask;
-	const unsigned char mode;
-	bool debug;
-};
-
-enum davinci_dm644x_index {
-	/* ATA and HDDIR functions */
-	DM644X_HDIREN,
-	DM644X_ATAEN,
-	DM644X_ATAEN_DISABLE,
-
-	/* HPI functions */
-	DM644X_HPIEN_DISABLE,
-
-	/* AEAW functions */
-	DM644X_AEAW,
-	DM644X_AEAW0,
-	DM644X_AEAW1,
-	DM644X_AEAW2,
-	DM644X_AEAW3,
-	DM644X_AEAW4,
-
-	/* Memory Stick */
-	DM644X_MSTK,
-
-	/* I2C */
-	DM644X_I2C,
-
-	/* ASP function */
-	DM644X_MCBSP,
-
-	/* UART1 */
-	DM644X_UART1,
-
-	/* UART2 */
-	DM644X_UART2,
-
-	/* PWM0 */
-	DM644X_PWM0,
-
-	/* PWM1 */
-	DM644X_PWM1,
-
-	/* PWM2 */
-	DM644X_PWM2,
-
-	/* VLYNQ function */
-	DM644X_VLYNQEN,
-	DM644X_VLSCREN,
-	DM644X_VLYNQWD,
-
-	/* EMAC and MDIO function */
-	DM644X_EMACEN,
-
-	/* GPIO3V[0:16] pins */
-	DM644X_GPIO3V,
-
-	/* GPIO pins */
-	DM644X_GPIO0,
-	DM644X_GPIO3,
-	DM644X_GPIO43_44,
-	DM644X_GPIO46_47,
-
-	/* VPBE */
-	DM644X_RGB666,
-
-	/* LCD */
-	DM644X_LOEEN,
-	DM644X_LFLDEN,
-};
-
-enum davinci_dm646x_index {
-	/* ATA function */
-	DM646X_ATAEN,
-
-	/* AUDIO Clock */
-	DM646X_AUDCK1,
-	DM646X_AUDCK0,
-
-	/* CRGEN Control */
-	DM646X_CRGMUX,
-
-	/* VPIF Control */
-	DM646X_STSOMUX_DISABLE,
-	DM646X_STSIMUX_DISABLE,
-	DM646X_PTSOMUX_DISABLE,
-	DM646X_PTSIMUX_DISABLE,
-
-	/* TSIF Control */
-	DM646X_STSOMUX,
-	DM646X_STSIMUX,
-	DM646X_PTSOMUX_PARALLEL,
-	DM646X_PTSIMUX_PARALLEL,
-	DM646X_PTSOMUX_SERIAL,
-	DM646X_PTSIMUX_SERIAL,
-};
-
-enum davinci_dm355_index {
-	/* MMC/SD 0 */
-	DM355_MMCSD0,
-
-	/* MMC/SD 1 */
-	DM355_SD1_CLK,
-	DM355_SD1_CMD,
-	DM355_SD1_DATA3,
-	DM355_SD1_DATA2,
-	DM355_SD1_DATA1,
-	DM355_SD1_DATA0,
-
-	/* I2C */
-	DM355_I2C_SDA,
-	DM355_I2C_SCL,
-
-	/* ASP0 function */
-	DM355_MCBSP0_BDX,
-	DM355_MCBSP0_X,
-	DM355_MCBSP0_BFSX,
-	DM355_MCBSP0_BDR,
-	DM355_MCBSP0_R,
-	DM355_MCBSP0_BFSR,
-
-	/* SPI0 */
-	DM355_SPI0_SDI,
-	DM355_SPI0_SDENA0,
-	DM355_SPI0_SDENA1,
-
-	/* IRQ muxing */
-	DM355_INT_EDMA_CC,
-	DM355_INT_EDMA_TC0_ERR,
-	DM355_INT_EDMA_TC1_ERR,
-
-	/* EDMA event muxing */
-	DM355_EVT8_ASP1_TX,
-	DM355_EVT9_ASP1_RX,
-	DM355_EVT26_MMC0_RX,
-
-	/* Video Out */
-	DM355_VOUT_FIELD,
-	DM355_VOUT_FIELD_G70,
-	DM355_VOUT_HVSYNC,
-	DM355_VOUT_COUTL_EN,
-	DM355_VOUT_COUTH_EN,
-
-	/* Video In Pin Mux */
-	DM355_VIN_PCLK,
-	DM355_VIN_CAM_WEN,
-	DM355_VIN_CAM_VD,
-	DM355_VIN_CAM_HD,
-	DM355_VIN_YIN_EN,
-	DM355_VIN_CINL_EN,
-	DM355_VIN_CINH_EN,
-};
-
-enum davinci_dm365_index {
-	/* MMC/SD 0 */
-	DM365_MMCSD0,
-
-	/* MMC/SD 1 */
-	DM365_SD1_CLK,
-	DM365_SD1_CMD,
-	DM365_SD1_DATA3,
-	DM365_SD1_DATA2,
-	DM365_SD1_DATA1,
-	DM365_SD1_DATA0,
-
-	/* I2C */
-	DM365_I2C_SDA,
-	DM365_I2C_SCL,
-
-	/* AEMIF */
-	DM365_AEMIF_AR_A14,
-	DM365_AEMIF_AR_BA0,
-	DM365_AEMIF_A3,
-	DM365_AEMIF_A7,
-	DM365_AEMIF_D15_8,
-	DM365_AEMIF_CE0,
-	DM365_AEMIF_CE1,
-	DM365_AEMIF_WE_OE,
-
-	/* ASP0 function */
-	DM365_MCBSP0_BDX,
-	DM365_MCBSP0_X,
-	DM365_MCBSP0_BFSX,
-	DM365_MCBSP0_BDR,
-	DM365_MCBSP0_R,
-	DM365_MCBSP0_BFSR,
-
-	/* SPI0 */
-	DM365_SPI0_SCLK,
-	DM365_SPI0_SDI,
-	DM365_SPI0_SDO,
-	DM365_SPI0_SDENA0,
-	DM365_SPI0_SDENA1,
-
-	/* UART */
-	DM365_UART0_RXD,
-	DM365_UART0_TXD,
-	DM365_UART1_RXD,
-	DM365_UART1_TXD,
-	DM365_UART1_RTS,
-	DM365_UART1_CTS,
-
-	/* EMAC */
-	DM365_EMAC_TX_EN,
-	DM365_EMAC_TX_CLK,
-	DM365_EMAC_COL,
-	DM365_EMAC_TXD3,
-	DM365_EMAC_TXD2,
-	DM365_EMAC_TXD1,
-	DM365_EMAC_TXD0,
-	DM365_EMAC_RXD3,
-	DM365_EMAC_RXD2,
-	DM365_EMAC_RXD1,
-	DM365_EMAC_RXD0,
-	DM365_EMAC_RX_CLK,
-	DM365_EMAC_RX_DV,
-	DM365_EMAC_RX_ER,
-	DM365_EMAC_CRS,
-	DM365_EMAC_MDIO,
-	DM365_EMAC_MDCLK,
-
-	/* Key Scan */
-	DM365_KEYSCAN,
-
-	/* PWM */
-	DM365_PWM0,
-	DM365_PWM0_G23,
-	DM365_PWM1,
-	DM365_PWM1_G25,
-	DM365_PWM2_G87,
-	DM365_PWM2_G88,
-	DM365_PWM2_G89,
-	DM365_PWM2_G90,
-	DM365_PWM3_G80,
-	DM365_PWM3_G81,
-	DM365_PWM3_G85,
-	DM365_PWM3_G86,
-
-	/* SPI1 */
-	DM365_SPI1_SCLK,
-	DM365_SPI1_SDO,
-	DM365_SPI1_SDI,
-	DM365_SPI1_SDENA0,
-	DM365_SPI1_SDENA1,
-
-	/* SPI2 */
-	DM365_SPI2_SCLK,
-	DM365_SPI2_SDO,
-	DM365_SPI2_SDI,
-	DM365_SPI2_SDENA0,
-	DM365_SPI2_SDENA1,
-
-	/* SPI3 */
-	DM365_SPI3_SCLK,
-	DM365_SPI3_SDO,
-	DM365_SPI3_SDI,
-	DM365_SPI3_SDENA0,
-	DM365_SPI3_SDENA1,
-
-	/* SPI4 */
-	DM365_SPI4_SCLK,
-	DM365_SPI4_SDO,
-	DM365_SPI4_SDI,
-	DM365_SPI4_SDENA0,
-	DM365_SPI4_SDENA1,
-
-	/* Clock */
-	DM365_CLKOUT0,
-	DM365_CLKOUT1,
-	DM365_CLKOUT2,
-
-	/* GPIO */
-	DM365_GPIO20,
-	DM365_GPIO30,
-	DM365_GPIO31,
-	DM365_GPIO32,
-	DM365_GPIO33,
-	DM365_GPIO40,
-	DM365_GPIO64_57,
-
-	/* Video */
-	DM365_VOUT_FIELD,
-	DM365_VOUT_FIELD_G81,
-	DM365_VOUT_HVSYNC,
-	DM365_VOUT_COUTL_EN,
-	DM365_VOUT_COUTH_EN,
-	DM365_VIN_CAM_WEN,
-	DM365_VIN_CAM_VD,
-	DM365_VIN_CAM_HD,
-	DM365_VIN_YIN4_7_EN,
-	DM365_VIN_YIN0_3_EN,
-
-	/* IRQ muxing */
-	DM365_INT_EDMA_CC,
-	DM365_INT_EDMA_TC0_ERR,
-	DM365_INT_EDMA_TC1_ERR,
-	DM365_INT_EDMA_TC2_ERR,
-	DM365_INT_EDMA_TC3_ERR,
-	DM365_INT_PRTCSS,
-	DM365_INT_EMAC_RXTHRESH,
-	DM365_INT_EMAC_RXPULSE,
-	DM365_INT_EMAC_TXPULSE,
-	DM365_INT_EMAC_MISCPULSE,
-	DM365_INT_IMX0_ENABLE,
-	DM365_INT_IMX0_DISABLE,
-	DM365_INT_HDVICP_ENABLE,
-	DM365_INT_HDVICP_DISABLE,
-	DM365_INT_IMX1_ENABLE,
-	DM365_INT_IMX1_DISABLE,
-	DM365_INT_NSF_ENABLE,
-	DM365_INT_NSF_DISABLE,
-
-	/* EDMA event muxing */
-	DM365_EVT2_ASP_TX,
-	DM365_EVT3_ASP_RX,
-	DM365_EVT2_VC_TX,
-	DM365_EVT3_VC_RX,
-	DM365_EVT26_MMC0_RX,
-};
-
-enum da830_index {
-	DA830_GPIO7_14,
-	DA830_RTCK,
-	DA830_GPIO7_15,
-	DA830_EMU_0,
-	DA830_EMB_SDCKE,
-	DA830_EMB_CLK_GLUE,
-	DA830_EMB_CLK,
-	DA830_NEMB_CS_0,
-	DA830_NEMB_CAS,
-	DA830_NEMB_RAS,
-	DA830_NEMB_WE,
-	DA830_EMB_BA_1,
-	DA830_EMB_BA_0,
-	DA830_EMB_A_0,
-	DA830_EMB_A_1,
-	DA830_EMB_A_2,
-	DA830_EMB_A_3,
-	DA830_EMB_A_4,
-	DA830_EMB_A_5,
-	DA830_GPIO7_0,
-	DA830_GPIO7_1,
-	DA830_GPIO7_2,
-	DA830_GPIO7_3,
-	DA830_GPIO7_4,
-	DA830_GPIO7_5,
-	DA830_GPIO7_6,
-	DA830_GPIO7_7,
-	DA830_EMB_A_6,
-	DA830_EMB_A_7,
-	DA830_EMB_A_8,
-	DA830_EMB_A_9,
-	DA830_EMB_A_10,
-	DA830_EMB_A_11,
-	DA830_EMB_A_12,
-	DA830_EMB_D_31,
-	DA830_GPIO7_8,
-	DA830_GPIO7_9,
-	DA830_GPIO7_10,
-	DA830_GPIO7_11,
-	DA830_GPIO7_12,
-	DA830_GPIO7_13,
-	DA830_GPIO3_13,
-	DA830_EMB_D_30,
-	DA830_EMB_D_29,
-	DA830_EMB_D_28,
-	DA830_EMB_D_27,
-	DA830_EMB_D_26,
-	DA830_EMB_D_25,
-	DA830_EMB_D_24,
-	DA830_EMB_D_23,
-	DA830_EMB_D_22,
-	DA830_EMB_D_21,
-	DA830_EMB_D_20,
-	DA830_EMB_D_19,
-	DA830_EMB_D_18,
-	DA830_EMB_D_17,
-	DA830_EMB_D_16,
-	DA830_NEMB_WE_DQM_3,
-	DA830_NEMB_WE_DQM_2,
-	DA830_EMB_D_0,
-	DA830_EMB_D_1,
-	DA830_EMB_D_2,
-	DA830_EMB_D_3,
-	DA830_EMB_D_4,
-	DA830_EMB_D_5,
-	DA830_EMB_D_6,
-	DA830_GPIO6_0,
-	DA830_GPIO6_1,
-	DA830_GPIO6_2,
-	DA830_GPIO6_3,
-	DA830_GPIO6_4,
-	DA830_GPIO6_5,
-	DA830_GPIO6_6,
-	DA830_EMB_D_7,
-	DA830_EMB_D_8,
-	DA830_EMB_D_9,
-	DA830_EMB_D_10,
-	DA830_EMB_D_11,
-	DA830_EMB_D_12,
-	DA830_EMB_D_13,
-	DA830_EMB_D_14,
-	DA830_GPIO6_7,
-	DA830_GPIO6_8,
-	DA830_GPIO6_9,
-	DA830_GPIO6_10,
-	DA830_GPIO6_11,
-	DA830_GPIO6_12,
-	DA830_GPIO6_13,
-	DA830_GPIO6_14,
-	DA830_EMB_D_15,
-	DA830_NEMB_WE_DQM_1,
-	DA830_NEMB_WE_DQM_0,
-	DA830_SPI0_SOMI_0,
-	DA830_SPI0_SIMO_0,
-	DA830_SPI0_CLK,
-	DA830_NSPI0_ENA,
-	DA830_NSPI0_SCS_0,
-	DA830_EQEP0I,
-	DA830_EQEP0S,
-	DA830_EQEP1I,
-	DA830_NUART0_CTS,
-	DA830_NUART0_RTS,
-	DA830_EQEP0A,
-	DA830_EQEP0B,
-	DA830_GPIO6_15,
-	DA830_GPIO5_14,
-	DA830_GPIO5_15,
-	DA830_GPIO5_0,
-	DA830_GPIO5_1,
-	DA830_GPIO5_2,
-	DA830_GPIO5_3,
-	DA830_GPIO5_4,
-	DA830_SPI1_SOMI_0,
-	DA830_SPI1_SIMO_0,
-	DA830_SPI1_CLK,
-	DA830_UART0_RXD,
-	DA830_UART0_TXD,
-	DA830_AXR1_10,
-	DA830_AXR1_11,
-	DA830_NSPI1_ENA,
-	DA830_I2C1_SCL,
-	DA830_I2C1_SDA,
-	DA830_EQEP1S,
-	DA830_I2C0_SDA,
-	DA830_I2C0_SCL,
-	DA830_UART2_RXD,
-	DA830_TM64P0_IN12,
-	DA830_TM64P0_OUT12,
-	DA830_GPIO5_5,
-	DA830_GPIO5_6,
-	DA830_GPIO5_7,
-	DA830_GPIO5_8,
-	DA830_GPIO5_9,
-	DA830_GPIO5_10,
-	DA830_GPIO5_11,
-	DA830_GPIO5_12,
-	DA830_NSPI1_SCS_0,
-	DA830_USB0_DRVVBUS,
-	DA830_AHCLKX0,
-	DA830_ACLKX0,
-	DA830_AFSX0,
-	DA830_AHCLKR0,
-	DA830_ACLKR0,
-	DA830_AFSR0,
-	DA830_UART2_TXD,
-	DA830_AHCLKX2,
-	DA830_ECAP0_APWM0,
-	DA830_RMII_MHZ_50_CLK,
-	DA830_ECAP1_APWM1,
-	DA830_USB_REFCLKIN,
-	DA830_GPIO5_13,
-	DA830_GPIO4_15,
-	DA830_GPIO2_11,
-	DA830_GPIO2_12,
-	DA830_GPIO2_13,
-	DA830_GPIO2_14,
-	DA830_GPIO2_15,
-	DA830_GPIO3_12,
-	DA830_AMUTE0,
-	DA830_AXR0_0,
-	DA830_AXR0_1,
-	DA830_AXR0_2,
-	DA830_AXR0_3,
-	DA830_AXR0_4,
-	DA830_AXR0_5,
-	DA830_AXR0_6,
-	DA830_RMII_TXD_0,
-	DA830_RMII_TXD_1,
-	DA830_RMII_TXEN,
-	DA830_RMII_CRS_DV,
-	DA830_RMII_RXD_0,
-	DA830_RMII_RXD_1,
-	DA830_RMII_RXER,
-	DA830_AFSR2,
-	DA830_ACLKX2,
-	DA830_AXR2_3,
-	DA830_AXR2_2,
-	DA830_AXR2_1,
-	DA830_AFSX2,
-	DA830_ACLKR2,
-	DA830_NRESETOUT,
-	DA830_GPIO3_0,
-	DA830_GPIO3_1,
-	DA830_GPIO3_2,
-	DA830_GPIO3_3,
-	DA830_GPIO3_4,
-	DA830_GPIO3_5,
-	DA830_GPIO3_6,
-	DA830_AXR0_7,
-	DA830_AXR0_8,
-	DA830_UART1_RXD,
-	DA830_UART1_TXD,
-	DA830_AXR0_11,
-	DA830_AHCLKX1,
-	DA830_ACLKX1,
-	DA830_AFSX1,
-	DA830_MDIO_CLK,
-	DA830_MDIO_D,
-	DA830_AXR0_9,
-	DA830_AXR0_10,
-	DA830_EPWM0B,
-	DA830_EPWM0A,
-	DA830_EPWMSYNCI,
-	DA830_AXR2_0,
-	DA830_EPWMSYNC0,
-	DA830_GPIO3_7,
-	DA830_GPIO3_8,
-	DA830_GPIO3_9,
-	DA830_GPIO3_10,
-	DA830_GPIO3_11,
-	DA830_GPIO3_14,
-	DA830_GPIO3_15,
-	DA830_GPIO4_10,
-	DA830_AHCLKR1,
-	DA830_ACLKR1,
-	DA830_AFSR1,
-	DA830_AMUTE1,
-	DA830_AXR1_0,
-	DA830_AXR1_1,
-	DA830_AXR1_2,
-	DA830_AXR1_3,
-	DA830_ECAP2_APWM2,
-	DA830_EHRPWMGLUETZ,
-	DA830_EQEP1A,
-	DA830_GPIO4_11,
-	DA830_GPIO4_12,
-	DA830_GPIO4_13,
-	DA830_GPIO4_14,
-	DA830_GPIO4_0,
-	DA830_GPIO4_1,
-	DA830_GPIO4_2,
-	DA830_GPIO4_3,
-	DA830_AXR1_4,
-	DA830_AXR1_5,
-	DA830_AXR1_6,
-	DA830_AXR1_7,
-	DA830_AXR1_8,
-	DA830_AXR1_9,
-	DA830_EMA_D_0,
-	DA830_EMA_D_1,
-	DA830_EQEP1B,
-	DA830_EPWM2B,
-	DA830_EPWM2A,
-	DA830_EPWM1B,
-	DA830_EPWM1A,
-	DA830_MMCSD_DAT_0,
-	DA830_MMCSD_DAT_1,
-	DA830_UHPI_HD_0,
-	DA830_UHPI_HD_1,
-	DA830_GPIO4_4,
-	DA830_GPIO4_5,
-	DA830_GPIO4_6,
-	DA830_GPIO4_7,
-	DA830_GPIO4_8,
-	DA830_GPIO4_9,
-	DA830_GPIO0_0,
-	DA830_GPIO0_1,
-	DA830_EMA_D_2,
-	DA830_EMA_D_3,
-	DA830_EMA_D_4,
-	DA830_EMA_D_5,
-	DA830_EMA_D_6,
-	DA830_EMA_D_7,
-	DA830_EMA_D_8,
-	DA830_EMA_D_9,
-	DA830_MMCSD_DAT_2,
-	DA830_MMCSD_DAT_3,
-	DA830_MMCSD_DAT_4,
-	DA830_MMCSD_DAT_5,
-	DA830_MMCSD_DAT_6,
-	DA830_MMCSD_DAT_7,
-	DA830_UHPI_HD_8,
-	DA830_UHPI_HD_9,
-	DA830_UHPI_HD_2,
-	DA830_UHPI_HD_3,
-	DA830_UHPI_HD_4,
-	DA830_UHPI_HD_5,
-	DA830_UHPI_HD_6,
-	DA830_UHPI_HD_7,
-	DA830_LCD_D_8,
-	DA830_LCD_D_9,
-	DA830_GPIO0_2,
-	DA830_GPIO0_3,
-	DA830_GPIO0_4,
-	DA830_GPIO0_5,
-	DA830_GPIO0_6,
-	DA830_GPIO0_7,
-	DA830_GPIO0_8,
-	DA830_GPIO0_9,
-	DA830_EMA_D_10,
-	DA830_EMA_D_11,
-	DA830_EMA_D_12,
-	DA830_EMA_D_13,
-	DA830_EMA_D_14,
-	DA830_EMA_D_15,
-	DA830_EMA_A_0,
-	DA830_EMA_A_1,
-	DA830_UHPI_HD_10,
-	DA830_UHPI_HD_11,
-	DA830_UHPI_HD_12,
-	DA830_UHPI_HD_13,
-	DA830_UHPI_HD_14,
-	DA830_UHPI_HD_15,
-	DA830_LCD_D_7,
-	DA830_MMCSD_CLK,
-	DA830_LCD_D_10,
-	DA830_LCD_D_11,
-	DA830_LCD_D_12,
-	DA830_LCD_D_13,
-	DA830_LCD_D_14,
-	DA830_LCD_D_15,
-	DA830_UHPI_HCNTL0,
-	DA830_GPIO0_10,
-	DA830_GPIO0_11,
-	DA830_GPIO0_12,
-	DA830_GPIO0_13,
-	DA830_GPIO0_14,
-	DA830_GPIO0_15,
-	DA830_GPIO1_0,
-	DA830_GPIO1_1,
-	DA830_EMA_A_2,
-	DA830_EMA_A_3,
-	DA830_EMA_A_4,
-	DA830_EMA_A_5,
-	DA830_EMA_A_6,
-	DA830_EMA_A_7,
-	DA830_EMA_A_8,
-	DA830_EMA_A_9,
-	DA830_MMCSD_CMD,
-	DA830_LCD_D_6,
-	DA830_LCD_D_3,
-	DA830_LCD_D_2,
-	DA830_LCD_D_1,
-	DA830_LCD_D_0,
-	DA830_LCD_PCLK,
-	DA830_LCD_HSYNC,
-	DA830_UHPI_HCNTL1,
-	DA830_GPIO1_2,
-	DA830_GPIO1_3,
-	DA830_GPIO1_4,
-	DA830_GPIO1_5,
-	DA830_GPIO1_6,
-	DA830_GPIO1_7,
-	DA830_GPIO1_8,
-	DA830_GPIO1_9,
-	DA830_EMA_A_10,
-	DA830_EMA_A_11,
-	DA830_EMA_A_12,
-	DA830_EMA_BA_1,
-	DA830_EMA_BA_0,
-	DA830_EMA_CLK,
-	DA830_EMA_SDCKE,
-	DA830_NEMA_CAS,
-	DA830_LCD_VSYNC,
-	DA830_NLCD_AC_ENB_CS,
-	DA830_LCD_MCLK,
-	DA830_LCD_D_5,
-	DA830_LCD_D_4,
-	DA830_OBSCLK,
-	DA830_NEMA_CS_4,
-	DA830_UHPI_HHWIL,
-	DA830_AHCLKR2,
-	DA830_GPIO1_10,
-	DA830_GPIO1_11,
-	DA830_GPIO1_12,
-	DA830_GPIO1_13,
-	DA830_GPIO1_14,
-	DA830_GPIO1_15,
-	DA830_GPIO2_0,
-	DA830_GPIO2_1,
-	DA830_NEMA_RAS,
-	DA830_NEMA_WE,
-	DA830_NEMA_CS_0,
-	DA830_NEMA_CS_2,
-	DA830_NEMA_CS_3,
-	DA830_NEMA_OE,
-	DA830_NEMA_WE_DQM_1,
-	DA830_NEMA_WE_DQM_0,
-	DA830_NEMA_CS_5,
-	DA830_UHPI_HRNW,
-	DA830_NUHPI_HAS,
-	DA830_NUHPI_HCS,
-	DA830_NUHPI_HDS1,
-	DA830_NUHPI_HDS2,
-	DA830_NUHPI_HINT,
-	DA830_AXR0_12,
-	DA830_AMUTE2,
-	DA830_AXR0_13,
-	DA830_AXR0_14,
-	DA830_AXR0_15,
-	DA830_GPIO2_2,
-	DA830_GPIO2_3,
-	DA830_GPIO2_4,
-	DA830_GPIO2_5,
-	DA830_GPIO2_6,
-	DA830_GPIO2_7,
-	DA830_GPIO2_8,
-	DA830_GPIO2_9,
-	DA830_EMA_WAIT_0,
-	DA830_NUHPI_HRDY,
-	DA830_GPIO2_10,
-};
-
-enum davinci_da850_index {
-	/* UART0 function */
-	DA850_NUART0_CTS,
-	DA850_NUART0_RTS,
-	DA850_UART0_RXD,
-	DA850_UART0_TXD,
-
-	/* UART1 function */
-	DA850_NUART1_CTS,
-	DA850_NUART1_RTS,
-	DA850_UART1_RXD,
-	DA850_UART1_TXD,
-
-	/* UART2 function */
-	DA850_NUART2_CTS,
-	DA850_NUART2_RTS,
-	DA850_UART2_RXD,
-	DA850_UART2_TXD,
-
-	/* I2C1 function */
-	DA850_I2C1_SCL,
-	DA850_I2C1_SDA,
-
-	/* I2C0 function */
-	DA850_I2C0_SDA,
-	DA850_I2C0_SCL,
-
-	/* EMAC function */
-	DA850_MII_TXEN,
-	DA850_MII_TXCLK,
-	DA850_MII_COL,
-	DA850_MII_TXD_3,
-	DA850_MII_TXD_2,
-	DA850_MII_TXD_1,
-	DA850_MII_TXD_0,
-	DA850_MII_RXER,
-	DA850_MII_CRS,
-	DA850_MII_RXCLK,
-	DA850_MII_RXDV,
-	DA850_MII_RXD_3,
-	DA850_MII_RXD_2,
-	DA850_MII_RXD_1,
-	DA850_MII_RXD_0,
-	DA850_MDIO_CLK,
-	DA850_MDIO_D,
-	DA850_RMII_TXD_0,
-	DA850_RMII_TXD_1,
-	DA850_RMII_TXEN,
-	DA850_RMII_CRS_DV,
-	DA850_RMII_RXD_0,
-	DA850_RMII_RXD_1,
-	DA850_RMII_RXER,
-	DA850_RMII_MHZ_50_CLK,
-
-	/* McASP function */
-	DA850_ACLKR,
-	DA850_ACLKX,
-	DA850_AFSR,
-	DA850_AFSX,
-	DA850_AHCLKR,
-	DA850_AHCLKX,
-	DA850_AMUTE,
-	DA850_AXR_15,
-	DA850_AXR_14,
-	DA850_AXR_13,
-	DA850_AXR_12,
-	DA850_AXR_11,
-	DA850_AXR_10,
-	DA850_AXR_9,
-	DA850_AXR_8,
-	DA850_AXR_7,
-	DA850_AXR_6,
-	DA850_AXR_5,
-	DA850_AXR_4,
-	DA850_AXR_3,
-	DA850_AXR_2,
-	DA850_AXR_1,
-	DA850_AXR_0,
-
-	/* LCD function */
-	DA850_LCD_D_7,
-	DA850_LCD_D_6,
-	DA850_LCD_D_5,
-	DA850_LCD_D_4,
-	DA850_LCD_D_3,
-	DA850_LCD_D_2,
-	DA850_LCD_D_1,
-	DA850_LCD_D_0,
-	DA850_LCD_D_15,
-	DA850_LCD_D_14,
-	DA850_LCD_D_13,
-	DA850_LCD_D_12,
-	DA850_LCD_D_11,
-	DA850_LCD_D_10,
-	DA850_LCD_D_9,
-	DA850_LCD_D_8,
-	DA850_LCD_PCLK,
-	DA850_LCD_HSYNC,
-	DA850_LCD_VSYNC,
-	DA850_NLCD_AC_ENB_CS,
-
-	/* MMC/SD0 function */
-	DA850_MMCSD0_DAT_0,
-	DA850_MMCSD0_DAT_1,
-	DA850_MMCSD0_DAT_2,
-	DA850_MMCSD0_DAT_3,
-	DA850_MMCSD0_CLK,
-	DA850_MMCSD0_CMD,
-
-	/* MMC/SD1 function */
-	DA850_MMCSD1_DAT_0,
-	DA850_MMCSD1_DAT_1,
-	DA850_MMCSD1_DAT_2,
-	DA850_MMCSD1_DAT_3,
-	DA850_MMCSD1_CLK,
-	DA850_MMCSD1_CMD,
-
-	/* EMIF2.5/EMIFA function */
-	DA850_EMA_D_7,
-	DA850_EMA_D_6,
-	DA850_EMA_D_5,
-	DA850_EMA_D_4,
-	DA850_EMA_D_3,
-	DA850_EMA_D_2,
-	DA850_EMA_D_1,
-	DA850_EMA_D_0,
-	DA850_EMA_A_1,
-	DA850_EMA_A_2,
-	DA850_NEMA_CS_3,
-	DA850_NEMA_CS_4,
-	DA850_NEMA_WE,
-	DA850_NEMA_OE,
-	DA850_EMA_D_15,
-	DA850_EMA_D_14,
-	DA850_EMA_D_13,
-	DA850_EMA_D_12,
-	DA850_EMA_D_11,
-	DA850_EMA_D_10,
-	DA850_EMA_D_9,
-	DA850_EMA_D_8,
-	DA850_EMA_A_0,
-	DA850_EMA_A_3,
-	DA850_EMA_A_4,
-	DA850_EMA_A_5,
-	DA850_EMA_A_6,
-	DA850_EMA_A_7,
-	DA850_EMA_A_8,
-	DA850_EMA_A_9,
-	DA850_EMA_A_10,
-	DA850_EMA_A_11,
-	DA850_EMA_A_12,
-	DA850_EMA_A_13,
-	DA850_EMA_A_14,
-	DA850_EMA_A_15,
-	DA850_EMA_A_16,
-	DA850_EMA_A_17,
-	DA850_EMA_A_18,
-	DA850_EMA_A_19,
-	DA850_EMA_A_20,
-	DA850_EMA_A_21,
-	DA850_EMA_A_22,
-	DA850_EMA_A_23,
-	DA850_EMA_BA_1,
-	DA850_EMA_CLK,
-	DA850_EMA_WAIT_1,
-	DA850_NEMA_CS_2,
-
-	/* GPIO function */
-	DA850_GPIO2_4,
-	DA850_GPIO2_6,
-	DA850_GPIO2_8,
-	DA850_GPIO2_15,
-	DA850_GPIO3_12,
-	DA850_GPIO3_13,
-	DA850_GPIO4_0,
-	DA850_GPIO4_1,
-	DA850_GPIO6_9,
-	DA850_GPIO6_10,
-	DA850_GPIO6_13,
-	DA850_RTC_ALARM,
-
-	/* VPIF Capture */
-	DA850_VPIF_DIN0,
-	DA850_VPIF_DIN1,
-	DA850_VPIF_DIN2,
-	DA850_VPIF_DIN3,
-	DA850_VPIF_DIN4,
-	DA850_VPIF_DIN5,
-	DA850_VPIF_DIN6,
-	DA850_VPIF_DIN7,
-	DA850_VPIF_DIN8,
-	DA850_VPIF_DIN9,
-	DA850_VPIF_DIN10,
-	DA850_VPIF_DIN11,
-	DA850_VPIF_DIN12,
-	DA850_VPIF_DIN13,
-	DA850_VPIF_DIN14,
-	DA850_VPIF_DIN15,
-	DA850_VPIF_CLKIN0,
-	DA850_VPIF_CLKIN1,
-	DA850_VPIF_CLKIN2,
-	DA850_VPIF_CLKIN3,
-
-	/* VPIF Display */
-	DA850_VPIF_DOUT0,
-	DA850_VPIF_DOUT1,
-	DA850_VPIF_DOUT2,
-	DA850_VPIF_DOUT3,
-	DA850_VPIF_DOUT4,
-	DA850_VPIF_DOUT5,
-	DA850_VPIF_DOUT6,
-	DA850_VPIF_DOUT7,
-	DA850_VPIF_DOUT8,
-	DA850_VPIF_DOUT9,
-	DA850_VPIF_DOUT10,
-	DA850_VPIF_DOUT11,
-	DA850_VPIF_DOUT12,
-	DA850_VPIF_DOUT13,
-	DA850_VPIF_DOUT14,
-	DA850_VPIF_DOUT15,
-	DA850_VPIF_CLKO2,
-	DA850_VPIF_CLKO3,
-};
-
-#define PINMUX(x)		(4 * (x))
-
-#ifdef CONFIG_DAVINCI_MUX
-/* setup pin muxing */
-extern int davinci_cfg_reg(unsigned long reg_cfg);
-extern int davinci_cfg_reg_list(const short pins[]);
-#else
-/* boot loader does it all (no warnings from CONFIG_DAVINCI_MUX_WARNINGS) */
-static inline int davinci_cfg_reg(unsigned long reg_cfg) { return 0; }
-static inline int davinci_cfg_reg_list(const short pins[])
-{
-	return 0;
-}
-#endif
-
-#endif /* __INC_MACH_MUX_H */
diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h
deleted file mode 100644
index 53b456a5bbe0..000000000000
--- a/arch/arm/mach-davinci/include/mach/uncompress.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * Serial port stubs for kernel decompress status messages
- *
- * Initially based on:
- * arch/arm/plat-omap/include/mach/uncompress.h
- *
- * Original copyrights follow.
- *
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * Rewritten by:
- * Author: <source@mvista.com>
- * 2004 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/types.h>
-#include <linux/serial_reg.h>
-
-#include <asm/mach-types.h>
-
-#include <mach/serial.h>
-
-#define IOMEM(x)	((void __force __iomem *)(x))
-
-u32 *uart;
-
-/* PORT_16C550A, in polled non-fifo mode */
-static inline void putc(char c)
-{
-	if (!uart)
-		return;
-
-	while (!(uart[UART_LSR] & UART_LSR_THRE))
-		barrier();
-	uart[UART_TX] = c;
-}
-
-static inline void flush(void)
-{
-	if (!uart)
-		return;
-
-	while (!(uart[UART_LSR] & UART_LSR_THRE))
-		barrier();
-}
-
-static inline void set_uart_info(u32 phys)
-{
-	uart = (u32 *)phys;
-}
-
-#define _DEBUG_LL_ENTRY(machine, phys)				\
-	{							\
-		if (machine_is_##machine()) {			\
-			set_uart_info(phys);			\
-			break;					\
-		}						\
-	}
-
-#define DEBUG_LL_DAVINCI(machine, port)				\
-	_DEBUG_LL_ENTRY(machine, DAVINCI_UART##port##_BASE)
-
-#define DEBUG_LL_DA8XX(machine, port)				\
-	_DEBUG_LL_ENTRY(machine, DA8XX_UART##port##_BASE)
-
-static inline void __arch_decomp_setup(unsigned long arch_id)
-{
-	/*
-	 * Initialize the port based on the machine ID from the bootloader.
-	 * Note that we're using macros here instead of switch statement
-	 * as machine_is functions are optimized out for the boards that
-	 * are not selected.
-	 */
-	do {
-		/* Davinci boards */
-		DEBUG_LL_DAVINCI(davinci_evm,		0);
-		DEBUG_LL_DAVINCI(sffsdr,		0);
-		DEBUG_LL_DAVINCI(neuros_osd2,		0);
-		DEBUG_LL_DAVINCI(davinci_dm355_evm,	0);
-		DEBUG_LL_DAVINCI(dm355_leopard,		0);
-		DEBUG_LL_DAVINCI(davinci_dm6467_evm,	0);
-		DEBUG_LL_DAVINCI(davinci_dm365_evm,	0);
-
-		/* DA8xx boards */
-		DEBUG_LL_DA8XX(davinci_da830_evm,	2);
-		DEBUG_LL_DA8XX(davinci_da850_evm,	2);
-		DEBUG_LL_DA8XX(mityomapl138,		1);
-		DEBUG_LL_DA8XX(omapl138_hawkboard,	2);
-	} while (0);
-}
-
-#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c
index 6a2ff0a654a5..814a6b714010 100644
--- a/arch/arm/mach-davinci/mux.c
+++ b/arch/arm/mach-davinci/mux.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Utility to set the DAVINCI MUX register from a table in mux.h
  *
@@ -8,10 +9,7 @@
  *
  * Written by Tony Lindgren
  *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
+ * 2007 (c) MontaVista Software, Inc.
  *
  * Copyright (C) 2008 Texas Instruments.
  */
@@ -22,8 +20,8 @@
 #include <linux/module.h>
 #include <linux/spinlock.h>
 
-#include <mach/mux.h>
-#include <mach/common.h>
+#include "mux.h"
+#include "common.h"
 
 static void __iomem *pinmux_base;
 
diff --git a/arch/arm/mach-davinci/mux.h b/arch/arm/mach-davinci/mux.h
index 5aad1e7dd210..b5effe16402c 100644
--- a/arch/arm/mach-davinci/mux.h
+++ b/arch/arm/mach-davinci/mux.h
@@ -1,19 +1,984 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Pin-multiplex helper macros for TI DaVinci family devices
  *
  * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
  *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
+ * 2007 (c) MontaVista Software, Inc.
  *
  * Copyright (C) 2008 Texas Instruments.
  */
 #ifndef _MACH_DAVINCI_MUX_H_
 #define _MACH_DAVINCI_MUX_H_
 
-#include <mach/mux.h>
+struct mux_config {
+	const char *name;
+	const char *mux_reg_name;
+	const unsigned char mux_reg;
+	const unsigned char mask_offset;
+	const unsigned char mask;
+	const unsigned char mode;
+	bool debug;
+};
+
+enum davinci_dm644x_index {
+	/* ATA and HDDIR functions */
+	DM644X_HDIREN,
+	DM644X_ATAEN,
+	DM644X_ATAEN_DISABLE,
+
+	/* HPI functions */
+	DM644X_HPIEN_DISABLE,
+
+	/* AEAW functions */
+	DM644X_AEAW,
+	DM644X_AEAW0,
+	DM644X_AEAW1,
+	DM644X_AEAW2,
+	DM644X_AEAW3,
+	DM644X_AEAW4,
+
+	/* Memory Stick */
+	DM644X_MSTK,
+
+	/* I2C */
+	DM644X_I2C,
+
+	/* ASP function */
+	DM644X_MCBSP,
+
+	/* UART1 */
+	DM644X_UART1,
+
+	/* UART2 */
+	DM644X_UART2,
+
+	/* PWM0 */
+	DM644X_PWM0,
+
+	/* PWM1 */
+	DM644X_PWM1,
+
+	/* PWM2 */
+	DM644X_PWM2,
+
+	/* VLYNQ function */
+	DM644X_VLYNQEN,
+	DM644X_VLSCREN,
+	DM644X_VLYNQWD,
+
+	/* EMAC and MDIO function */
+	DM644X_EMACEN,
+
+	/* GPIO3V[0:16] pins */
+	DM644X_GPIO3V,
+
+	/* GPIO pins */
+	DM644X_GPIO0,
+	DM644X_GPIO3,
+	DM644X_GPIO43_44,
+	DM644X_GPIO46_47,
+
+	/* VPBE */
+	DM644X_RGB666,
+
+	/* LCD */
+	DM644X_LOEEN,
+	DM644X_LFLDEN,
+};
+
+enum davinci_dm646x_index {
+	/* ATA function */
+	DM646X_ATAEN,
+
+	/* AUDIO Clock */
+	DM646X_AUDCK1,
+	DM646X_AUDCK0,
+
+	/* CRGEN Control */
+	DM646X_CRGMUX,
+
+	/* VPIF Control */
+	DM646X_STSOMUX_DISABLE,
+	DM646X_STSIMUX_DISABLE,
+	DM646X_PTSOMUX_DISABLE,
+	DM646X_PTSIMUX_DISABLE,
+
+	/* TSIF Control */
+	DM646X_STSOMUX,
+	DM646X_STSIMUX,
+	DM646X_PTSOMUX_PARALLEL,
+	DM646X_PTSIMUX_PARALLEL,
+	DM646X_PTSOMUX_SERIAL,
+	DM646X_PTSIMUX_SERIAL,
+};
+
+enum davinci_dm355_index {
+	/* MMC/SD 0 */
+	DM355_MMCSD0,
+
+	/* MMC/SD 1 */
+	DM355_SD1_CLK,
+	DM355_SD1_CMD,
+	DM355_SD1_DATA3,
+	DM355_SD1_DATA2,
+	DM355_SD1_DATA1,
+	DM355_SD1_DATA0,
+
+	/* I2C */
+	DM355_I2C_SDA,
+	DM355_I2C_SCL,
+
+	/* ASP0 function */
+	DM355_MCBSP0_BDX,
+	DM355_MCBSP0_X,
+	DM355_MCBSP0_BFSX,
+	DM355_MCBSP0_BDR,
+	DM355_MCBSP0_R,
+	DM355_MCBSP0_BFSR,
+
+	/* SPI0 */
+	DM355_SPI0_SDI,
+	DM355_SPI0_SDENA0,
+	DM355_SPI0_SDENA1,
+
+	/* IRQ muxing */
+	DM355_INT_EDMA_CC,
+	DM355_INT_EDMA_TC0_ERR,
+	DM355_INT_EDMA_TC1_ERR,
+
+	/* EDMA event muxing */
+	DM355_EVT8_ASP1_TX,
+	DM355_EVT9_ASP1_RX,
+	DM355_EVT26_MMC0_RX,
+
+	/* Video Out */
+	DM355_VOUT_FIELD,
+	DM355_VOUT_FIELD_G70,
+	DM355_VOUT_HVSYNC,
+	DM355_VOUT_COUTL_EN,
+	DM355_VOUT_COUTH_EN,
+
+	/* Video In Pin Mux */
+	DM355_VIN_PCLK,
+	DM355_VIN_CAM_WEN,
+	DM355_VIN_CAM_VD,
+	DM355_VIN_CAM_HD,
+	DM355_VIN_YIN_EN,
+	DM355_VIN_CINL_EN,
+	DM355_VIN_CINH_EN,
+};
+
+enum davinci_dm365_index {
+	/* MMC/SD 0 */
+	DM365_MMCSD0,
+
+	/* MMC/SD 1 */
+	DM365_SD1_CLK,
+	DM365_SD1_CMD,
+	DM365_SD1_DATA3,
+	DM365_SD1_DATA2,
+	DM365_SD1_DATA1,
+	DM365_SD1_DATA0,
+
+	/* I2C */
+	DM365_I2C_SDA,
+	DM365_I2C_SCL,
+
+	/* AEMIF */
+	DM365_AEMIF_AR_A14,
+	DM365_AEMIF_AR_BA0,
+	DM365_AEMIF_A3,
+	DM365_AEMIF_A7,
+	DM365_AEMIF_D15_8,
+	DM365_AEMIF_CE0,
+	DM365_AEMIF_CE1,
+	DM365_AEMIF_WE_OE,
+
+	/* ASP0 function */
+	DM365_MCBSP0_BDX,
+	DM365_MCBSP0_X,
+	DM365_MCBSP0_BFSX,
+	DM365_MCBSP0_BDR,
+	DM365_MCBSP0_R,
+	DM365_MCBSP0_BFSR,
+
+	/* SPI0 */
+	DM365_SPI0_SCLK,
+	DM365_SPI0_SDI,
+	DM365_SPI0_SDO,
+	DM365_SPI0_SDENA0,
+	DM365_SPI0_SDENA1,
+
+	/* UART */
+	DM365_UART0_RXD,
+	DM365_UART0_TXD,
+	DM365_UART1_RXD,
+	DM365_UART1_TXD,
+	DM365_UART1_RTS,
+	DM365_UART1_CTS,
+
+	/* EMAC */
+	DM365_EMAC_TX_EN,
+	DM365_EMAC_TX_CLK,
+	DM365_EMAC_COL,
+	DM365_EMAC_TXD3,
+	DM365_EMAC_TXD2,
+	DM365_EMAC_TXD1,
+	DM365_EMAC_TXD0,
+	DM365_EMAC_RXD3,
+	DM365_EMAC_RXD2,
+	DM365_EMAC_RXD1,
+	DM365_EMAC_RXD0,
+	DM365_EMAC_RX_CLK,
+	DM365_EMAC_RX_DV,
+	DM365_EMAC_RX_ER,
+	DM365_EMAC_CRS,
+	DM365_EMAC_MDIO,
+	DM365_EMAC_MDCLK,
+
+	/* Key Scan */
+	DM365_KEYSCAN,
+
+	/* PWM */
+	DM365_PWM0,
+	DM365_PWM0_G23,
+	DM365_PWM1,
+	DM365_PWM1_G25,
+	DM365_PWM2_G87,
+	DM365_PWM2_G88,
+	DM365_PWM2_G89,
+	DM365_PWM2_G90,
+	DM365_PWM3_G80,
+	DM365_PWM3_G81,
+	DM365_PWM3_G85,
+	DM365_PWM3_G86,
+
+	/* SPI1 */
+	DM365_SPI1_SCLK,
+	DM365_SPI1_SDO,
+	DM365_SPI1_SDI,
+	DM365_SPI1_SDENA0,
+	DM365_SPI1_SDENA1,
+
+	/* SPI2 */
+	DM365_SPI2_SCLK,
+	DM365_SPI2_SDO,
+	DM365_SPI2_SDI,
+	DM365_SPI2_SDENA0,
+	DM365_SPI2_SDENA1,
+
+	/* SPI3 */
+	DM365_SPI3_SCLK,
+	DM365_SPI3_SDO,
+	DM365_SPI3_SDI,
+	DM365_SPI3_SDENA0,
+	DM365_SPI3_SDENA1,
+
+	/* SPI4 */
+	DM365_SPI4_SCLK,
+	DM365_SPI4_SDO,
+	DM365_SPI4_SDI,
+	DM365_SPI4_SDENA0,
+	DM365_SPI4_SDENA1,
+
+	/* Clock */
+	DM365_CLKOUT0,
+	DM365_CLKOUT1,
+	DM365_CLKOUT2,
+
+	/* GPIO */
+	DM365_GPIO20,
+	DM365_GPIO30,
+	DM365_GPIO31,
+	DM365_GPIO32,
+	DM365_GPIO33,
+	DM365_GPIO40,
+	DM365_GPIO64_57,
+
+	/* Video */
+	DM365_VOUT_FIELD,
+	DM365_VOUT_FIELD_G81,
+	DM365_VOUT_HVSYNC,
+	DM365_VOUT_COUTL_EN,
+	DM365_VOUT_COUTH_EN,
+	DM365_VIN_CAM_WEN,
+	DM365_VIN_CAM_VD,
+	DM365_VIN_CAM_HD,
+	DM365_VIN_YIN4_7_EN,
+	DM365_VIN_YIN0_3_EN,
+
+	/* IRQ muxing */
+	DM365_INT_EDMA_CC,
+	DM365_INT_EDMA_TC0_ERR,
+	DM365_INT_EDMA_TC1_ERR,
+	DM365_INT_EDMA_TC2_ERR,
+	DM365_INT_EDMA_TC3_ERR,
+	DM365_INT_PRTCSS,
+	DM365_INT_EMAC_RXTHRESH,
+	DM365_INT_EMAC_RXPULSE,
+	DM365_INT_EMAC_TXPULSE,
+	DM365_INT_EMAC_MISCPULSE,
+	DM365_INT_IMX0_ENABLE,
+	DM365_INT_IMX0_DISABLE,
+	DM365_INT_HDVICP_ENABLE,
+	DM365_INT_HDVICP_DISABLE,
+	DM365_INT_IMX1_ENABLE,
+	DM365_INT_IMX1_DISABLE,
+	DM365_INT_NSF_ENABLE,
+	DM365_INT_NSF_DISABLE,
+
+	/* EDMA event muxing */
+	DM365_EVT2_ASP_TX,
+	DM365_EVT3_ASP_RX,
+	DM365_EVT2_VC_TX,
+	DM365_EVT3_VC_RX,
+	DM365_EVT26_MMC0_RX,
+};
+
+enum da830_index {
+	DA830_GPIO7_14,
+	DA830_RTCK,
+	DA830_GPIO7_15,
+	DA830_EMU_0,
+	DA830_EMB_SDCKE,
+	DA830_EMB_CLK_GLUE,
+	DA830_EMB_CLK,
+	DA830_NEMB_CS_0,
+	DA830_NEMB_CAS,
+	DA830_NEMB_RAS,
+	DA830_NEMB_WE,
+	DA830_EMB_BA_1,
+	DA830_EMB_BA_0,
+	DA830_EMB_A_0,
+	DA830_EMB_A_1,
+	DA830_EMB_A_2,
+	DA830_EMB_A_3,
+	DA830_EMB_A_4,
+	DA830_EMB_A_5,
+	DA830_GPIO7_0,
+	DA830_GPIO7_1,
+	DA830_GPIO7_2,
+	DA830_GPIO7_3,
+	DA830_GPIO7_4,
+	DA830_GPIO7_5,
+	DA830_GPIO7_6,
+	DA830_GPIO7_7,
+	DA830_EMB_A_6,
+	DA830_EMB_A_7,
+	DA830_EMB_A_8,
+	DA830_EMB_A_9,
+	DA830_EMB_A_10,
+	DA830_EMB_A_11,
+	DA830_EMB_A_12,
+	DA830_EMB_D_31,
+	DA830_GPIO7_8,
+	DA830_GPIO7_9,
+	DA830_GPIO7_10,
+	DA830_GPIO7_11,
+	DA830_GPIO7_12,
+	DA830_GPIO7_13,
+	DA830_GPIO3_13,
+	DA830_EMB_D_30,
+	DA830_EMB_D_29,
+	DA830_EMB_D_28,
+	DA830_EMB_D_27,
+	DA830_EMB_D_26,
+	DA830_EMB_D_25,
+	DA830_EMB_D_24,
+	DA830_EMB_D_23,
+	DA830_EMB_D_22,
+	DA830_EMB_D_21,
+	DA830_EMB_D_20,
+	DA830_EMB_D_19,
+	DA830_EMB_D_18,
+	DA830_EMB_D_17,
+	DA830_EMB_D_16,
+	DA830_NEMB_WE_DQM_3,
+	DA830_NEMB_WE_DQM_2,
+	DA830_EMB_D_0,
+	DA830_EMB_D_1,
+	DA830_EMB_D_2,
+	DA830_EMB_D_3,
+	DA830_EMB_D_4,
+	DA830_EMB_D_5,
+	DA830_EMB_D_6,
+	DA830_GPIO6_0,
+	DA830_GPIO6_1,
+	DA830_GPIO6_2,
+	DA830_GPIO6_3,
+	DA830_GPIO6_4,
+	DA830_GPIO6_5,
+	DA830_GPIO6_6,
+	DA830_EMB_D_7,
+	DA830_EMB_D_8,
+	DA830_EMB_D_9,
+	DA830_EMB_D_10,
+	DA830_EMB_D_11,
+	DA830_EMB_D_12,
+	DA830_EMB_D_13,
+	DA830_EMB_D_14,
+	DA830_GPIO6_7,
+	DA830_GPIO6_8,
+	DA830_GPIO6_9,
+	DA830_GPIO6_10,
+	DA830_GPIO6_11,
+	DA830_GPIO6_12,
+	DA830_GPIO6_13,
+	DA830_GPIO6_14,
+	DA830_EMB_D_15,
+	DA830_NEMB_WE_DQM_1,
+	DA830_NEMB_WE_DQM_0,
+	DA830_SPI0_SOMI_0,
+	DA830_SPI0_SIMO_0,
+	DA830_SPI0_CLK,
+	DA830_NSPI0_ENA,
+	DA830_NSPI0_SCS_0,
+	DA830_EQEP0I,
+	DA830_EQEP0S,
+	DA830_EQEP1I,
+	DA830_NUART0_CTS,
+	DA830_NUART0_RTS,
+	DA830_EQEP0A,
+	DA830_EQEP0B,
+	DA830_GPIO6_15,
+	DA830_GPIO5_14,
+	DA830_GPIO5_15,
+	DA830_GPIO5_0,
+	DA830_GPIO5_1,
+	DA830_GPIO5_2,
+	DA830_GPIO5_3,
+	DA830_GPIO5_4,
+	DA830_SPI1_SOMI_0,
+	DA830_SPI1_SIMO_0,
+	DA830_SPI1_CLK,
+	DA830_UART0_RXD,
+	DA830_UART0_TXD,
+	DA830_AXR1_10,
+	DA830_AXR1_11,
+	DA830_NSPI1_ENA,
+	DA830_I2C1_SCL,
+	DA830_I2C1_SDA,
+	DA830_EQEP1S,
+	DA830_I2C0_SDA,
+	DA830_I2C0_SCL,
+	DA830_UART2_RXD,
+	DA830_TM64P0_IN12,
+	DA830_TM64P0_OUT12,
+	DA830_GPIO5_5,
+	DA830_GPIO5_6,
+	DA830_GPIO5_7,
+	DA830_GPIO5_8,
+	DA830_GPIO5_9,
+	DA830_GPIO5_10,
+	DA830_GPIO5_11,
+	DA830_GPIO5_12,
+	DA830_NSPI1_SCS_0,
+	DA830_USB0_DRVVBUS,
+	DA830_AHCLKX0,
+	DA830_ACLKX0,
+	DA830_AFSX0,
+	DA830_AHCLKR0,
+	DA830_ACLKR0,
+	DA830_AFSR0,
+	DA830_UART2_TXD,
+	DA830_AHCLKX2,
+	DA830_ECAP0_APWM0,
+	DA830_RMII_MHZ_50_CLK,
+	DA830_ECAP1_APWM1,
+	DA830_USB_REFCLKIN,
+	DA830_GPIO5_13,
+	DA830_GPIO4_15,
+	DA830_GPIO2_11,
+	DA830_GPIO2_12,
+	DA830_GPIO2_13,
+	DA830_GPIO2_14,
+	DA830_GPIO2_15,
+	DA830_GPIO3_12,
+	DA830_AMUTE0,
+	DA830_AXR0_0,
+	DA830_AXR0_1,
+	DA830_AXR0_2,
+	DA830_AXR0_3,
+	DA830_AXR0_4,
+	DA830_AXR0_5,
+	DA830_AXR0_6,
+	DA830_RMII_TXD_0,
+	DA830_RMII_TXD_1,
+	DA830_RMII_TXEN,
+	DA830_RMII_CRS_DV,
+	DA830_RMII_RXD_0,
+	DA830_RMII_RXD_1,
+	DA830_RMII_RXER,
+	DA830_AFSR2,
+	DA830_ACLKX2,
+	DA830_AXR2_3,
+	DA830_AXR2_2,
+	DA830_AXR2_1,
+	DA830_AFSX2,
+	DA830_ACLKR2,
+	DA830_NRESETOUT,
+	DA830_GPIO3_0,
+	DA830_GPIO3_1,
+	DA830_GPIO3_2,
+	DA830_GPIO3_3,
+	DA830_GPIO3_4,
+	DA830_GPIO3_5,
+	DA830_GPIO3_6,
+	DA830_AXR0_7,
+	DA830_AXR0_8,
+	DA830_UART1_RXD,
+	DA830_UART1_TXD,
+	DA830_AXR0_11,
+	DA830_AHCLKX1,
+	DA830_ACLKX1,
+	DA830_AFSX1,
+	DA830_MDIO_CLK,
+	DA830_MDIO_D,
+	DA830_AXR0_9,
+	DA830_AXR0_10,
+	DA830_EPWM0B,
+	DA830_EPWM0A,
+	DA830_EPWMSYNCI,
+	DA830_AXR2_0,
+	DA830_EPWMSYNC0,
+	DA830_GPIO3_7,
+	DA830_GPIO3_8,
+	DA830_GPIO3_9,
+	DA830_GPIO3_10,
+	DA830_GPIO3_11,
+	DA830_GPIO3_14,
+	DA830_GPIO3_15,
+	DA830_GPIO4_10,
+	DA830_AHCLKR1,
+	DA830_ACLKR1,
+	DA830_AFSR1,
+	DA830_AMUTE1,
+	DA830_AXR1_0,
+	DA830_AXR1_1,
+	DA830_AXR1_2,
+	DA830_AXR1_3,
+	DA830_ECAP2_APWM2,
+	DA830_EHRPWMGLUETZ,
+	DA830_EQEP1A,
+	DA830_GPIO4_11,
+	DA830_GPIO4_12,
+	DA830_GPIO4_13,
+	DA830_GPIO4_14,
+	DA830_GPIO4_0,
+	DA830_GPIO4_1,
+	DA830_GPIO4_2,
+	DA830_GPIO4_3,
+	DA830_AXR1_4,
+	DA830_AXR1_5,
+	DA830_AXR1_6,
+	DA830_AXR1_7,
+	DA830_AXR1_8,
+	DA830_AXR1_9,
+	DA830_EMA_D_0,
+	DA830_EMA_D_1,
+	DA830_EQEP1B,
+	DA830_EPWM2B,
+	DA830_EPWM2A,
+	DA830_EPWM1B,
+	DA830_EPWM1A,
+	DA830_MMCSD_DAT_0,
+	DA830_MMCSD_DAT_1,
+	DA830_UHPI_HD_0,
+	DA830_UHPI_HD_1,
+	DA830_GPIO4_4,
+	DA830_GPIO4_5,
+	DA830_GPIO4_6,
+	DA830_GPIO4_7,
+	DA830_GPIO4_8,
+	DA830_GPIO4_9,
+	DA830_GPIO0_0,
+	DA830_GPIO0_1,
+	DA830_EMA_D_2,
+	DA830_EMA_D_3,
+	DA830_EMA_D_4,
+	DA830_EMA_D_5,
+	DA830_EMA_D_6,
+	DA830_EMA_D_7,
+	DA830_EMA_D_8,
+	DA830_EMA_D_9,
+	DA830_MMCSD_DAT_2,
+	DA830_MMCSD_DAT_3,
+	DA830_MMCSD_DAT_4,
+	DA830_MMCSD_DAT_5,
+	DA830_MMCSD_DAT_6,
+	DA830_MMCSD_DAT_7,
+	DA830_UHPI_HD_8,
+	DA830_UHPI_HD_9,
+	DA830_UHPI_HD_2,
+	DA830_UHPI_HD_3,
+	DA830_UHPI_HD_4,
+	DA830_UHPI_HD_5,
+	DA830_UHPI_HD_6,
+	DA830_UHPI_HD_7,
+	DA830_LCD_D_8,
+	DA830_LCD_D_9,
+	DA830_GPIO0_2,
+	DA830_GPIO0_3,
+	DA830_GPIO0_4,
+	DA830_GPIO0_5,
+	DA830_GPIO0_6,
+	DA830_GPIO0_7,
+	DA830_GPIO0_8,
+	DA830_GPIO0_9,
+	DA830_EMA_D_10,
+	DA830_EMA_D_11,
+	DA830_EMA_D_12,
+	DA830_EMA_D_13,
+	DA830_EMA_D_14,
+	DA830_EMA_D_15,
+	DA830_EMA_A_0,
+	DA830_EMA_A_1,
+	DA830_UHPI_HD_10,
+	DA830_UHPI_HD_11,
+	DA830_UHPI_HD_12,
+	DA830_UHPI_HD_13,
+	DA830_UHPI_HD_14,
+	DA830_UHPI_HD_15,
+	DA830_LCD_D_7,
+	DA830_MMCSD_CLK,
+	DA830_LCD_D_10,
+	DA830_LCD_D_11,
+	DA830_LCD_D_12,
+	DA830_LCD_D_13,
+	DA830_LCD_D_14,
+	DA830_LCD_D_15,
+	DA830_UHPI_HCNTL0,
+	DA830_GPIO0_10,
+	DA830_GPIO0_11,
+	DA830_GPIO0_12,
+	DA830_GPIO0_13,
+	DA830_GPIO0_14,
+	DA830_GPIO0_15,
+	DA830_GPIO1_0,
+	DA830_GPIO1_1,
+	DA830_EMA_A_2,
+	DA830_EMA_A_3,
+	DA830_EMA_A_4,
+	DA830_EMA_A_5,
+	DA830_EMA_A_6,
+	DA830_EMA_A_7,
+	DA830_EMA_A_8,
+	DA830_EMA_A_9,
+	DA830_MMCSD_CMD,
+	DA830_LCD_D_6,
+	DA830_LCD_D_3,
+	DA830_LCD_D_2,
+	DA830_LCD_D_1,
+	DA830_LCD_D_0,
+	DA830_LCD_PCLK,
+	DA830_LCD_HSYNC,
+	DA830_UHPI_HCNTL1,
+	DA830_GPIO1_2,
+	DA830_GPIO1_3,
+	DA830_GPIO1_4,
+	DA830_GPIO1_5,
+	DA830_GPIO1_6,
+	DA830_GPIO1_7,
+	DA830_GPIO1_8,
+	DA830_GPIO1_9,
+	DA830_EMA_A_10,
+	DA830_EMA_A_11,
+	DA830_EMA_A_12,
+	DA830_EMA_BA_1,
+	DA830_EMA_BA_0,
+	DA830_EMA_CLK,
+	DA830_EMA_SDCKE,
+	DA830_NEMA_CAS,
+	DA830_LCD_VSYNC,
+	DA830_NLCD_AC_ENB_CS,
+	DA830_LCD_MCLK,
+	DA830_LCD_D_5,
+	DA830_LCD_D_4,
+	DA830_OBSCLK,
+	DA830_NEMA_CS_4,
+	DA830_UHPI_HHWIL,
+	DA830_AHCLKR2,
+	DA830_GPIO1_10,
+	DA830_GPIO1_11,
+	DA830_GPIO1_12,
+	DA830_GPIO1_13,
+	DA830_GPIO1_14,
+	DA830_GPIO1_15,
+	DA830_GPIO2_0,
+	DA830_GPIO2_1,
+	DA830_NEMA_RAS,
+	DA830_NEMA_WE,
+	DA830_NEMA_CS_0,
+	DA830_NEMA_CS_2,
+	DA830_NEMA_CS_3,
+	DA830_NEMA_OE,
+	DA830_NEMA_WE_DQM_1,
+	DA830_NEMA_WE_DQM_0,
+	DA830_NEMA_CS_5,
+	DA830_UHPI_HRNW,
+	DA830_NUHPI_HAS,
+	DA830_NUHPI_HCS,
+	DA830_NUHPI_HDS1,
+	DA830_NUHPI_HDS2,
+	DA830_NUHPI_HINT,
+	DA830_AXR0_12,
+	DA830_AMUTE2,
+	DA830_AXR0_13,
+	DA830_AXR0_14,
+	DA830_AXR0_15,
+	DA830_GPIO2_2,
+	DA830_GPIO2_3,
+	DA830_GPIO2_4,
+	DA830_GPIO2_5,
+	DA830_GPIO2_6,
+	DA830_GPIO2_7,
+	DA830_GPIO2_8,
+	DA830_GPIO2_9,
+	DA830_EMA_WAIT_0,
+	DA830_NUHPI_HRDY,
+	DA830_GPIO2_10,
+};
+
+enum davinci_da850_index {
+	/* UART0 function */
+	DA850_NUART0_CTS,
+	DA850_NUART0_RTS,
+	DA850_UART0_RXD,
+	DA850_UART0_TXD,
+
+	/* UART1 function */
+	DA850_NUART1_CTS,
+	DA850_NUART1_RTS,
+	DA850_UART1_RXD,
+	DA850_UART1_TXD,
+
+	/* UART2 function */
+	DA850_NUART2_CTS,
+	DA850_NUART2_RTS,
+	DA850_UART2_RXD,
+	DA850_UART2_TXD,
+
+	/* I2C1 function */
+	DA850_I2C1_SCL,
+	DA850_I2C1_SDA,
+
+	/* I2C0 function */
+	DA850_I2C0_SDA,
+	DA850_I2C0_SCL,
+
+	/* EMAC function */
+	DA850_MII_TXEN,
+	DA850_MII_TXCLK,
+	DA850_MII_COL,
+	DA850_MII_TXD_3,
+	DA850_MII_TXD_2,
+	DA850_MII_TXD_1,
+	DA850_MII_TXD_0,
+	DA850_MII_RXER,
+	DA850_MII_CRS,
+	DA850_MII_RXCLK,
+	DA850_MII_RXDV,
+	DA850_MII_RXD_3,
+	DA850_MII_RXD_2,
+	DA850_MII_RXD_1,
+	DA850_MII_RXD_0,
+	DA850_MDIO_CLK,
+	DA850_MDIO_D,
+	DA850_RMII_TXD_0,
+	DA850_RMII_TXD_1,
+	DA850_RMII_TXEN,
+	DA850_RMII_CRS_DV,
+	DA850_RMII_RXD_0,
+	DA850_RMII_RXD_1,
+	DA850_RMII_RXER,
+	DA850_RMII_MHZ_50_CLK,
+
+	/* McASP function */
+	DA850_ACLKR,
+	DA850_ACLKX,
+	DA850_AFSR,
+	DA850_AFSX,
+	DA850_AHCLKR,
+	DA850_AHCLKX,
+	DA850_AMUTE,
+	DA850_AXR_15,
+	DA850_AXR_14,
+	DA850_AXR_13,
+	DA850_AXR_12,
+	DA850_AXR_11,
+	DA850_AXR_10,
+	DA850_AXR_9,
+	DA850_AXR_8,
+	DA850_AXR_7,
+	DA850_AXR_6,
+	DA850_AXR_5,
+	DA850_AXR_4,
+	DA850_AXR_3,
+	DA850_AXR_2,
+	DA850_AXR_1,
+	DA850_AXR_0,
+
+	/* LCD function */
+	DA850_LCD_D_7,
+	DA850_LCD_D_6,
+	DA850_LCD_D_5,
+	DA850_LCD_D_4,
+	DA850_LCD_D_3,
+	DA850_LCD_D_2,
+	DA850_LCD_D_1,
+	DA850_LCD_D_0,
+	DA850_LCD_D_15,
+	DA850_LCD_D_14,
+	DA850_LCD_D_13,
+	DA850_LCD_D_12,
+	DA850_LCD_D_11,
+	DA850_LCD_D_10,
+	DA850_LCD_D_9,
+	DA850_LCD_D_8,
+	DA850_LCD_PCLK,
+	DA850_LCD_HSYNC,
+	DA850_LCD_VSYNC,
+	DA850_NLCD_AC_ENB_CS,
+
+	/* MMC/SD0 function */
+	DA850_MMCSD0_DAT_0,
+	DA850_MMCSD0_DAT_1,
+	DA850_MMCSD0_DAT_2,
+	DA850_MMCSD0_DAT_3,
+	DA850_MMCSD0_CLK,
+	DA850_MMCSD0_CMD,
+
+	/* MMC/SD1 function */
+	DA850_MMCSD1_DAT_0,
+	DA850_MMCSD1_DAT_1,
+	DA850_MMCSD1_DAT_2,
+	DA850_MMCSD1_DAT_3,
+	DA850_MMCSD1_CLK,
+	DA850_MMCSD1_CMD,
+
+	/* EMIF2.5/EMIFA function */
+	DA850_EMA_D_7,
+	DA850_EMA_D_6,
+	DA850_EMA_D_5,
+	DA850_EMA_D_4,
+	DA850_EMA_D_3,
+	DA850_EMA_D_2,
+	DA850_EMA_D_1,
+	DA850_EMA_D_0,
+	DA850_EMA_A_1,
+	DA850_EMA_A_2,
+	DA850_NEMA_CS_3,
+	DA850_NEMA_CS_4,
+	DA850_NEMA_WE,
+	DA850_NEMA_OE,
+	DA850_EMA_D_15,
+	DA850_EMA_D_14,
+	DA850_EMA_D_13,
+	DA850_EMA_D_12,
+	DA850_EMA_D_11,
+	DA850_EMA_D_10,
+	DA850_EMA_D_9,
+	DA850_EMA_D_8,
+	DA850_EMA_A_0,
+	DA850_EMA_A_3,
+	DA850_EMA_A_4,
+	DA850_EMA_A_5,
+	DA850_EMA_A_6,
+	DA850_EMA_A_7,
+	DA850_EMA_A_8,
+	DA850_EMA_A_9,
+	DA850_EMA_A_10,
+	DA850_EMA_A_11,
+	DA850_EMA_A_12,
+	DA850_EMA_A_13,
+	DA850_EMA_A_14,
+	DA850_EMA_A_15,
+	DA850_EMA_A_16,
+	DA850_EMA_A_17,
+	DA850_EMA_A_18,
+	DA850_EMA_A_19,
+	DA850_EMA_A_20,
+	DA850_EMA_A_21,
+	DA850_EMA_A_22,
+	DA850_EMA_A_23,
+	DA850_EMA_BA_1,
+	DA850_EMA_CLK,
+	DA850_EMA_WAIT_1,
+	DA850_NEMA_CS_2,
+
+	/* GPIO function */
+	DA850_GPIO2_4,
+	DA850_GPIO2_6,
+	DA850_GPIO2_8,
+	DA850_GPIO2_15,
+	DA850_GPIO3_12,
+	DA850_GPIO3_13,
+	DA850_GPIO4_0,
+	DA850_GPIO4_1,
+	DA850_GPIO6_9,
+	DA850_GPIO6_10,
+	DA850_GPIO6_13,
+	DA850_RTC_ALARM,
+
+	/* VPIF Capture */
+	DA850_VPIF_DIN0,
+	DA850_VPIF_DIN1,
+	DA850_VPIF_DIN2,
+	DA850_VPIF_DIN3,
+	DA850_VPIF_DIN4,
+	DA850_VPIF_DIN5,
+	DA850_VPIF_DIN6,
+	DA850_VPIF_DIN7,
+	DA850_VPIF_DIN8,
+	DA850_VPIF_DIN9,
+	DA850_VPIF_DIN10,
+	DA850_VPIF_DIN11,
+	DA850_VPIF_DIN12,
+	DA850_VPIF_DIN13,
+	DA850_VPIF_DIN14,
+	DA850_VPIF_DIN15,
+	DA850_VPIF_CLKIN0,
+	DA850_VPIF_CLKIN1,
+	DA850_VPIF_CLKIN2,
+	DA850_VPIF_CLKIN3,
+
+	/* VPIF Display */
+	DA850_VPIF_DOUT0,
+	DA850_VPIF_DOUT1,
+	DA850_VPIF_DOUT2,
+	DA850_VPIF_DOUT3,
+	DA850_VPIF_DOUT4,
+	DA850_VPIF_DOUT5,
+	DA850_VPIF_DOUT6,
+	DA850_VPIF_DOUT7,
+	DA850_VPIF_DOUT8,
+	DA850_VPIF_DOUT9,
+	DA850_VPIF_DOUT10,
+	DA850_VPIF_DOUT11,
+	DA850_VPIF_DOUT12,
+	DA850_VPIF_DOUT13,
+	DA850_VPIF_DOUT14,
+	DA850_VPIF_DOUT15,
+	DA850_VPIF_CLKO2,
+	DA850_VPIF_CLKO3,
+};
+
+#define PINMUX(x)		(4 * (x))
+
+#ifdef CONFIG_DAVINCI_MUX
+/* setup pin muxing */
+extern int davinci_cfg_reg(unsigned long reg_cfg);
+extern int davinci_cfg_reg_list(const short pins[]);
+#else
+/* boot loader does it all (no warnings from CONFIG_DAVINCI_MUX_WARNINGS) */
+static inline int davinci_cfg_reg(unsigned long reg_cfg) { return 0; }
+static inline int davinci_cfg_reg_list(const short pins[])
+{
+	return 0;
+}
+#endif
+
 
 #define MUX_CFG(soc, desc, muxreg, mode_offset, mode_mask, mux_mode, dbg)\
 [soc##_##desc] = {							\
diff --git a/arch/arm/mach-davinci/pdata-quirks.c b/arch/arm/mach-davinci/pdata-quirks.c
index 67f1c8537354..b8b5f1a5e092 100644
--- a/arch/arm/mach-davinci/pdata-quirks.c
+++ b/arch/arm/mach-davinci/pdata-quirks.c
@@ -10,8 +10,8 @@
 #include <media/i2c/tvp514x.h>
 #include <media/i2c/adv7343.h>
 
-#include <mach/common.h>
-#include <mach/da8xx.h>
+#include "common.h"
+#include "da8xx.h"
 
 struct pdata_init {
 	const char *compatible;
diff --git a/arch/arm/mach-davinci/pm.c b/arch/arm/mach-davinci/pm.c
index 323ee4e657c4..8aa39db095d7 100644
--- a/arch/arm/mach-davinci/pm.c
+++ b/arch/arm/mach-davinci/pm.c
@@ -16,11 +16,10 @@
 #include <asm/delay.h>
 #include <asm/io.h>
 
-#include <mach/common.h>
-#include <mach/da8xx.h>
-#include <mach/mux.h>
-#include <mach/pm.h>
-
+#include "common.h"
+#include "da8xx.h"
+#include "mux.h"
+#include "pm.h"
 #include "clock.h"
 #include "psc.h"
 #include "sram.h"
diff --git a/arch/arm/mach-davinci/include/mach/pm.h b/arch/arm/mach-davinci/pm.h
index 5a5f0ecc0704..6f50d6eb8da8 100644
--- a/arch/arm/mach-davinci/include/mach/pm.h
+++ b/arch/arm/mach-davinci/pm.h
@@ -1,16 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * TI DaVinci platform support for power management.
  *
  * Copyright (C) 2009 Texas Instruments, Inc. https://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 #ifndef _MACH_DAVINCI_PM_H
 #define _MACH_DAVINCI_PM_H
diff --git a/arch/arm/mach-davinci/pm_domain.c b/arch/arm/mach-davinci/pm_domain.c
index e251fd593bfd..6b21d5bd999c 100644
--- a/arch/arm/mach-davinci/pm_domain.c
+++ b/arch/arm/mach-davinci/pm_domain.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Runtime PM support code for DaVinci
  *
  * Author: Kevin Hilman
  *
  * Copyright (C) 2012 Texas Instruments, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 #include <linux/init.h>
 #include <linux/pm_runtime.h>
diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c
index 127b62ce7b1e..7f7814807bb5 100644
--- a/arch/arm/mach-davinci/serial.c
+++ b/arch/arm/mach-davinci/serial.c
@@ -14,8 +14,8 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <mach/serial.h>
-#include <mach/cputype.h>
+#include "serial.h"
+#include "cputype.h"
 
 static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
 				    int value)
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/serial.h
index d4b4aa87964f..c4a4ba553d45 100644
--- a/arch/arm/mach-davinci/include/mach/serial.h
+++ b/arch/arm/mach-davinci/serial.h
@@ -1,19 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * DaVinci serial device definitions
  *
  * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
  *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
+ * 2007 (c) MontaVista Software, Inc.
  */
 #ifndef __ASM_ARCH_SERIAL_H
 #define __ASM_ARCH_SERIAL_H
 
 #include <asm/memory.h>
 
-#include <mach/hardware.h>
+#include "hardware.h"
 
 #define DAVINCI_UART0_BASE	(IO_PHYS + 0x20000)
 #define DAVINCI_UART1_BASE	(IO_PHYS + 0x20400)
diff --git a/arch/arm/mach-davinci/sram.c b/arch/arm/mach-davinci/sram.c
index bbae190fd82c..d04f39fc84b6 100644
--- a/arch/arm/mach-davinci/sram.c
+++ b/arch/arm/mach-davinci/sram.c
@@ -9,7 +9,7 @@
 #include <linux/io.h>
 #include <linux/genalloc.h>
 
-#include <mach/common.h>
+#include "common.h"
 #include "sram.h"
 
 static struct gen_pool *sram_pool;
diff --git a/arch/arm/mach-davinci/usb-da8xx.c b/arch/arm/mach-davinci/usb-da8xx.c
index 25f21ee86f1a..9c8fc5031907 100644
--- a/arch/arm/mach-davinci/usb-da8xx.c
+++ b/arch/arm/mach-davinci/usb-da8xx.c
@@ -15,10 +15,9 @@
 #include <linux/platform_device.h>
 #include <linux/usb/musb.h>
 
-#include <mach/common.h>
-#include <mach/cputype.h>
-#include <mach/da8xx.h>
-
+#include "common.h"
+#include "cputype.h"
+#include "da8xx.h"
 #include "irqs.h"
 
 #define DA8XX_USB0_BASE		0x01e00000
diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c
index dd8db61cdd1c..a9e5c6e91e5d 100644
--- a/arch/arm/mach-davinci/usb.c
+++ b/arch/arm/mach-davinci/usb.c
@@ -8,9 +8,8 @@
 #include <linux/platform_data/usb-davinci.h>
 #include <linux/usb/musb.h>
 
-#include <mach/common.h>
-#include <mach/cputype.h>
-
+#include "common.h"
+#include "cputype.h"
 #include "irqs.h"
 
 #define DAVINCI_USB_OTG_BASE	0x01c64000
diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig
index 7747fe64420a..2252f465cafd 100644
--- a/arch/arm/mach-dove/Kconfig
+++ b/arch/arm/mach-dove/Kconfig
@@ -1,7 +1,19 @@
 # SPDX-License-Identifier: GPL-2.0
-if ARCH_DOVE
+menuconfig ARCH_DOVE
+	bool "Marvell Dove" if ARCH_MULTI_V7
+	depends on ATAGS
+	select CPU_PJ4
+	select GPIOLIB
+	select MVEBU_MBUS
+	select PINCTRL
+	select PINCTRL_DOVE
+	select PLAT_ORION_LEGACY
+	select PM_GENERIC_DOMAINS if PM
+	select PCI_QUIRKS if PCI
+	help
+	  Support for the Marvell Dove SoC 88AP510
 
-menu "Marvell Dove Implementations"
+if ARCH_DOVE
 
 config DOVE_LEGACY
 	bool
@@ -21,6 +33,4 @@ config MACH_CM_A510
 	  Say 'Y' here if you want your kernel to support the
 	  CompuLab CM-A510 Board.
 
-endmenu
-
 endif
diff --git a/arch/arm/mach-dove/Makefile b/arch/arm/mach-dove/Makefile
index cdf163cab738..da373a5768ba 100644
--- a/arch/arm/mach-dove/Makefile
+++ b/arch/arm/mach-dove/Makefile
@@ -1,4 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
+ccflags-y := -I$(srctree)/arch/arm/plat-orion/include
+
 obj-y				+= common.o
 obj-$(CONFIG_DOVE_LEGACY)	+= irq.o mpp.o
 obj-$(CONFIG_PCI)		+= pcie.o
diff --git a/arch/arm/mach-dove/Makefile.boot b/arch/arm/mach-dove/Makefile.boot
deleted file mode 100644
index e4dd1d26038f..000000000000
--- a/arch/arm/mach-dove/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
diff --git a/arch/arm/mach-dove/bridge-regs.h b/arch/arm/mach-dove/bridge-regs.h
index ace0b0bfbf11..6fbc152d0950 100644
--- a/arch/arm/mach-dove/bridge-regs.h
+++ b/arch/arm/mach-dove/bridge-regs.h
@@ -1,10 +1,5 @@
-/*
- * Mbus-L to Mbus Bridge Registers
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Mbus-L to Mbus Bridge Registers */
 
 #ifndef __ASM_ARCH_BRIDGE_REGS_H
 #define __ASM_ARCH_BRIDGE_REGS_H
diff --git a/arch/arm/mach-dove/cm-a510.c b/arch/arm/mach-dove/cm-a510.c
index 9f25c993d863..beb532537c22 100644
--- a/arch/arm/mach-dove/cm-a510.c
+++ b/arch/arm/mach-dove/cm-a510.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-dove/cm-a510.c
  *
@@ -5,10 +6,6 @@
  * Konstantin Sinyuk <kostyas@compulab.co.il>
  *
  * Based on Marvell DB-MV88AP510-BP Development Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index dbe970e37895..cd4ae7e4768d 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-dove/common.c
  *
  * Core functions for Marvell Dove 88AP510 System On Chip
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/clk-provider.h>
diff --git a/arch/arm/mach-dove/common.h b/arch/arm/mach-dove/common.h
index 1d725224d146..57ebc413d68c 100644
--- a/arch/arm/mach-dove/common.h
+++ b/arch/arm/mach-dove/common.h
@@ -1,11 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * arch/arm/mach-dove/common.h
  *
  * Core functions for Marvell Dove 88AP510 System On Chip
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #ifndef __ARCH_DOVE_COMMON_H
diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c
index 418ab21b9d9b..d5bf54040577 100644
--- a/arch/arm/mach-dove/dove-db-setup.c
+++ b/arch/arm/mach-dove/dove-db-setup.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-dove/dove-db-setup.c
  *
  * Marvell DB-MV88AP510-BP Development Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-dove/dove.h b/arch/arm/mach-dove/dove.h
index 320ed1696abd..e5054e3b0b78 100644
--- a/arch/arm/mach-dove/dove.h
+++ b/arch/arm/mach-dove/dove.h
@@ -1,10 +1,5 @@
-/*
- * Generic definitions for Marvell Dove 88AP510 SoC
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Generic definitions for Marvell Dove 88AP510 SoC */
 
 #ifndef __ASM_ARCH_DOVE_H
 #define __ASM_ARCH_DOVE_H
diff --git a/arch/arm/mach-dove/include/mach/uncompress.h b/arch/arm/mach-dove/include/mach/uncompress.h
deleted file mode 100644
index ddf873f35e2b..000000000000
--- a/arch/arm/mach-dove/include/mach/uncompress.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define UART0_PHYS_BASE (0xf1000000 + 0x12000)
-
-#define UART_THR ((volatile unsigned char *)(UART0_PHYS_BASE + 0x0))
-#define UART_LSR ((volatile unsigned char *)(UART0_PHYS_BASE + 0x14))
-
-#define LSR_THRE	0x20
-
-static inline void putc(const char c)
-{
-	int i;
-
-	for (i = 0; i < 0x1000; i++) {
-		/* Transmit fifo not full? */
-		if (*UART_LSR & LSR_THRE)
-			break;
-	}
-
-	*UART_THR = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c
index 31ccbcee2627..027a8f87bc2e 100644
--- a/arch/arm/mach-dove/irq.c
+++ b/arch/arm/mach-dove/irq.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-dove/irq.c
  *
  * Dove IRQ handling.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 #include <linux/init.h>
 #include <linux/irq.h>
@@ -73,12 +70,12 @@ void __init dove_init_irq(void)
 	/*
 	 * Initialize gpiolib for GPIOs 0-71.
 	 */
-	orion_gpio_init(NULL, 0, 32, DOVE_GPIO_LO_VIRT_BASE, 0,
+	orion_gpio_init(0, 32, DOVE_GPIO_LO_VIRT_BASE, 0,
 			IRQ_DOVE_GPIO_START, gpio0_irqs);
 
-	orion_gpio_init(NULL, 32, 32, DOVE_GPIO_HI_VIRT_BASE, 0,
+	orion_gpio_init(32, 32, DOVE_GPIO_HI_VIRT_BASE, 0,
 			IRQ_DOVE_GPIO_START + 32, gpio1_irqs);
 
-	orion_gpio_init(NULL, 64, 8, DOVE_GPIO2_VIRT_BASE, 0,
+	orion_gpio_init(64, 8, DOVE_GPIO2_VIRT_BASE, 0,
 			IRQ_DOVE_GPIO_START + 64, gpio2_irqs);
 }
diff --git a/arch/arm/mach-dove/irqs.h b/arch/arm/mach-dove/irqs.h
index a0742179faff..5467098c7042 100644
--- a/arch/arm/mach-dove/irqs.h
+++ b/arch/arm/mach-dove/irqs.h
@@ -1,10 +1,5 @@
-/*
- * IRQ definitions for Marvell Dove 88AP510 SoC
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* IRQ definitions for Marvell Dove 88AP510 SoC */
 
 #ifndef __ASM_ARCH_IRQS_H
 #define __ASM_ARCH_IRQS_H
diff --git a/arch/arm/mach-dove/mpp.c b/arch/arm/mach-dove/mpp.c
index 6acd8488bb05..93cb137da5f8 100644
--- a/arch/arm/mach-dove/mpp.c
+++ b/arch/arm/mach-dove/mpp.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-dove/mpp.c
  *
  * MPP functions for Marvell Dove SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c
index 2a493bdfffc6..754ca381f600 100644
--- a/arch/arm/mach-dove/pcie.c
+++ b/arch/arm/mach-dove/pcie.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-dove/pcie.c
  *
  * PCIe functions for Marvell Dove 88AP510 SoC
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/kernel.h>
@@ -136,14 +133,19 @@ static struct pci_ops pcie_ops = {
 	.write = pcie_wr_conf,
 };
 
+/*
+ * The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it
+ * is operating as a root complex this needs to be switched to
+ * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on
+ * the device. Decoding setup is handled by the orion code.
+ */
 static void rc_pci_fixup(struct pci_dev *dev)
 {
-	/*
-	 * Prevent enumeration of root complex.
-	 */
 	if (dev->bus->parent == NULL && dev->devfn == 0) {
 		int i;
 
+		dev->class &= 0xff;
+		dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
 		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
 			dev->resource[i].start = 0;
 			dev->resource[i].end   = 0;
diff --git a/arch/arm/mach-dove/pm.h b/arch/arm/mach-dove/pm.h
index 01267746d707..a4c3aba1e2d0 100644
--- a/arch/arm/mach-dove/pm.h
+++ b/arch/arm/mach-dove/pm.h
@@ -1,8 +1,4 @@
-/*
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
+/* SPDX-License-Identifier: GPL-2.0-only */
 
 #ifndef __ASM_ARCH_PM_H
 #define __ASM_ARCH_PM_H
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index 15c68a646d51..2c40996a444b 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -1,4 +1,18 @@
 # SPDX-License-Identifier: GPL-2.0-only
+menuconfig ARCH_EP93XX
+	bool "EP93xx-based"
+	depends on ATAGS
+	depends on ARCH_MULTI_V4T
+	depends on CPU_LITTLE_ENDIAN
+	select ARCH_SPARSEMEM_ENABLE
+	select ARM_AMBA
+	select ARM_VIC
+	select CLKSRC_MMIO
+	select CPU_ARM920T
+	select GPIOLIB
+	help
+	  This enables support for the Cirrus EP93xx series of CPUs.
+
 if ARCH_EP93XX
 
 menu "Cirrus EP93xx Implementation Options"
@@ -13,6 +27,7 @@ comment "EP93xx Platforms"
 
 config MACH_ADSSPHERE
 	bool "Support ADS Sphere"
+	depends on UNUSED_BOARD_FILES
 	help
 	  Say 'Y' here if you want your kernel to support the ADS
 	  Sphere board.
@@ -85,6 +100,7 @@ config MACH_EDB9315A
 
 config MACH_GESBC9312
 	bool "Support Glomation GESBC-9312-sx"
+	depends on UNUSED_BOARD_FILES
 	help
 	  Say 'Y' here if you want your kernel to support the Glomation
 	  GESBC-9312-sx board.
@@ -95,6 +111,7 @@ config MACH_MICRO9
 config MACH_MICRO9H
 	bool "Support Contec Micro9-High"
 	select MACH_MICRO9
+	depends on UNUSED_BOARD_FILES
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Contec Micro9-High board.
@@ -102,6 +119,7 @@ config MACH_MICRO9H
 config MACH_MICRO9M
 	bool "Support Contec Micro9-Mid"
 	select MACH_MICRO9
+	depends on UNUSED_BOARD_FILES
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Contec Micro9-Mid board.
@@ -109,6 +127,7 @@ config MACH_MICRO9M
 config MACH_MICRO9L
 	bool "Support Contec Micro9-Lite"
 	select MACH_MICRO9
+	depends on UNUSED_BOARD_FILES
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Contec Micro9-Lite board.
@@ -116,18 +135,21 @@ config MACH_MICRO9L
 config MACH_MICRO9S
 	bool "Support Contec Micro9-Slim"
 	select MACH_MICRO9
+	depends on UNUSED_BOARD_FILES
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Contec Micro9-Slim board.
 
 config MACH_SIM_ONE
         bool "Support Simplemachines Sim.One board"
+	depends on UNUSED_BOARD_FILES
         help
           Say 'Y' here if you want your kernel to support the
           Simplemachines Sim.One board.
 
 config MACH_SNAPPER_CL15
 	bool "Support Bluewater Systems Snapper CL15 Module"
+	depends on UNUSED_BOARD_FILES
 	help
 	  Say 'Y' here if you want your kernel to support the Bluewater
 	  Systems Snapper CL15 Module.
diff --git a/arch/arm/mach-ep93xx/Makefile.boot b/arch/arm/mach-ep93xx/Makefile.boot
deleted file mode 100644
index 4c0a039a5027..000000000000
--- a/arch/arm/mach-ep93xx/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-# Empty file waiting for deletion once Makefile.boot isn't needed any more.
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index 8d5e349a7a6d..0c48d3c5b8e7 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -32,6 +32,7 @@ static void __init adssphere_init_machine(void)
 MACHINE_START(ADSSPHERE, "ADS Sphere board")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index cc75087134d3..85a496ddc619 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -148,8 +148,10 @@ static struct clk_hw *ep93xx_clk_register_gate(const char *name,
 	psc->lock = &clk_lock;
 
 	clk = clk_register(NULL, &psc->hw);
-	if (IS_ERR(clk))
+	if (IS_ERR(clk)) {
 		kfree(psc);
+		return ERR_CAST(clk);
+	}
 
 	return &psc->hw;
 }
@@ -207,7 +209,7 @@ static int ep93xx_mux_determine_rate(struct clk_hw *hw,
 				struct clk_rate_request *req)
 {
 	unsigned long rate = req->rate;
-	struct clk *best_parent = 0;
+	struct clk *best_parent = NULL;
 	unsigned long __parent_rate;
 	unsigned long best_rate = 0, actual_rate, mclk_rate;
 	unsigned long best_parent_rate;
@@ -343,9 +345,10 @@ static struct clk_hw *clk_hw_register_ddiv(const char *name,
 	psc->hw.init = &init;
 
 	clk = clk_register(NULL, &psc->hw);
-	if (IS_ERR(clk))
+	if (IS_ERR(clk)) {
 		kfree(psc);
-
+		return ERR_CAST(clk);
+	}
 	return &psc->hw;
 }
 
@@ -450,9 +453,10 @@ static struct clk_hw *clk_hw_register_div(const char *name,
 	psc->hw.init = &init;
 
 	clk = clk_register(NULL, &psc->hw);
-	if (IS_ERR(clk))
+	if (IS_ERR(clk)) {
 		kfree(psc);
-
+		return ERR_CAST(clk);
+	}
 	return &psc->hw;
 }
 
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index a3b4e843456a..95e731676cea 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -22,6 +22,7 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
+#include <linux/uaccess.h>
 #include <linux/termios.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/serial.h>
@@ -47,6 +48,7 @@
 #include <asm/mach/map.h>
 
 #include "soc.h"
+#include "irqs.h"
 
 /*************************************************************************
  * Static I/O mappings that are needed for all EP93xx platforms
@@ -75,8 +77,8 @@ void __init ep93xx_map_io(void)
  *************************************************************************/
 void __init ep93xx_init_irq(void)
 {
-	vic_init(EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
-	vic_init(EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0);
+	vic_init(EP93XX_VIC1_BASE, IRQ_EP93XX_VIC0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
+	vic_init(EP93XX_VIC2_BASE, IRQ_EP93XX_VIC1, EP93XX_VIC2_VALID_IRQ_MASK, 0);
 }
 
 
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index af0e22471ebd..4b90899a66e9 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -243,6 +243,7 @@ static void __init edb93xx_init_machine(void)
 MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
 	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
@@ -255,6 +256,7 @@ MACHINE_END
 MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
 	/* Maintainer: George Kashperko <george@chas.com.ua> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
@@ -267,6 +269,7 @@ MACHINE_END
 MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
@@ -279,6 +282,7 @@ MACHINE_END
 MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
 	/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
@@ -291,6 +295,7 @@ MACHINE_END
 MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
 	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
@@ -303,6 +308,7 @@ MACHINE_END
 MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
 	/* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
@@ -315,6 +321,7 @@ MACHINE_END
 MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
@@ -327,6 +334,7 @@ MACHINE_END
 MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/ep93xx-regs.h
index 6839ea032e58..8fa3646de0a4 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/ep93xx-regs.h
@@ -1,8 +1,4 @@
 /* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
- */
-
 #ifndef __ASM_ARCH_EP93XX_REGS_H
 #define __ASM_ARCH_EP93XX_REGS_H
 
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index d7f9890321eb..0b7043e3e178 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -32,6 +32,7 @@ static void __init gesbc9312_init_machine(void)
 MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
diff --git a/arch/arm/mach-ep93xx/gpio-ep93xx.h b/arch/arm/mach-ep93xx/gpio-ep93xx.h
index 242af4a401ea..7b46eb7e5507 100644
--- a/arch/arm/mach-ep93xx/gpio-ep93xx.h
+++ b/arch/arm/mach-ep93xx/gpio-ep93xx.h
@@ -4,7 +4,7 @@
 #ifndef __GPIO_EP93XX_H
 #define __GPIO_EP93XX_H
 
-#include <mach/ep93xx-regs.h>
+#include "ep93xx-regs.h"
 
 #define EP93XX_GPIO_PHYS_BASE		EP93XX_APB_PHYS(0x00040000)
 #define EP93XX_GPIO_BASE		EP93XX_APB_IOMEM(0x00040000)
diff --git a/arch/arm/mach-ep93xx/include/mach/irqs.h b/arch/arm/mach-ep93xx/include/mach/irqs.h
deleted file mode 100644
index 244daf83ce6d..000000000000
--- a/arch/arm/mach-ep93xx/include/mach/irqs.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-ep93xx/include/mach/irqs.h
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#define IRQ_EP93XX_COMMRX		2
-#define IRQ_EP93XX_COMMTX		3
-#define IRQ_EP93XX_TIMER1		4
-#define IRQ_EP93XX_TIMER2		5
-#define IRQ_EP93XX_AACINTR		6
-#define IRQ_EP93XX_DMAM2P0		7
-#define IRQ_EP93XX_DMAM2P1		8
-#define IRQ_EP93XX_DMAM2P2		9
-#define IRQ_EP93XX_DMAM2P3		10
-#define IRQ_EP93XX_DMAM2P4		11
-#define IRQ_EP93XX_DMAM2P5		12
-#define IRQ_EP93XX_DMAM2P6		13
-#define IRQ_EP93XX_DMAM2P7		14
-#define IRQ_EP93XX_DMAM2P8		15
-#define IRQ_EP93XX_DMAM2P9		16
-#define IRQ_EP93XX_DMAM2M0		17
-#define IRQ_EP93XX_DMAM2M1		18
-#define IRQ_EP93XX_GPIO0MUX		19
-#define IRQ_EP93XX_GPIO1MUX		20
-#define IRQ_EP93XX_GPIO2MUX		21
-#define IRQ_EP93XX_GPIO3MUX		22
-#define IRQ_EP93XX_UART1RX		23
-#define IRQ_EP93XX_UART1TX		24
-#define IRQ_EP93XX_UART2RX		25
-#define IRQ_EP93XX_UART2TX		26
-#define IRQ_EP93XX_UART3RX		27
-#define IRQ_EP93XX_UART3TX		28
-#define IRQ_EP93XX_KEY			29
-#define IRQ_EP93XX_TOUCH		30
-#define EP93XX_VIC1_VALID_IRQ_MASK	0x7ffffffc
-
-#define IRQ_EP93XX_EXT0			32
-#define IRQ_EP93XX_EXT1			33
-#define IRQ_EP93XX_EXT2			34
-#define IRQ_EP93XX_64HZ			35
-#define IRQ_EP93XX_WATCHDOG		36
-#define IRQ_EP93XX_RTC			37
-#define IRQ_EP93XX_IRDA			38
-#define IRQ_EP93XX_ETHERNET		39
-#define IRQ_EP93XX_EXT3			40
-#define IRQ_EP93XX_PROG			41
-#define IRQ_EP93XX_1HZ			42
-#define IRQ_EP93XX_VSYNC		43
-#define IRQ_EP93XX_VIDEO_FIFO		44
-#define IRQ_EP93XX_SSP1RX		45
-#define IRQ_EP93XX_SSP1TX		46
-#define IRQ_EP93XX_GPIO4MUX		47
-#define IRQ_EP93XX_GPIO5MUX		48
-#define IRQ_EP93XX_GPIO6MUX		49
-#define IRQ_EP93XX_GPIO7MUX		50
-#define IRQ_EP93XX_TIMER3		51
-#define IRQ_EP93XX_UART1		52
-#define IRQ_EP93XX_SSP			53
-#define IRQ_EP93XX_UART2		54
-#define IRQ_EP93XX_UART3		55
-#define IRQ_EP93XX_USB			56
-#define IRQ_EP93XX_ETHERNET_PME		57
-#define IRQ_EP93XX_DSP			58
-#define IRQ_EP93XX_GPIO_AB		59
-#define IRQ_EP93XX_SAI			60
-#define EP93XX_VIC2_VALID_IRQ_MASK	0x1fffffff
-
-#define NR_EP93XX_IRQS			(64 + 24)
-
-#define EP93XX_BOARD_IRQ(x)		(NR_EP93XX_IRQS + (x))
-#define EP93XX_BOARD_IRQS		32
-
-#define NR_IRQS				(NR_EP93XX_IRQS + EP93XX_BOARD_IRQS)
-
-
-#endif
diff --git a/arch/arm/mach-ep93xx/irqs.h b/arch/arm/mach-ep93xx/irqs.h
new file mode 100644
index 000000000000..353201b90c66
--- /dev/null
+++ b/arch/arm/mach-ep93xx/irqs.h
@@ -0,0 +1,76 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#define IRQ_EP93XX_VIC0			1
+
+#define IRQ_EP93XX_COMMRX		(IRQ_EP93XX_VIC0 + 2)
+#define IRQ_EP93XX_COMMTX		(IRQ_EP93XX_VIC0 + 3)
+#define IRQ_EP93XX_TIMER1		(IRQ_EP93XX_VIC0 + 4)
+#define IRQ_EP93XX_TIMER2		(IRQ_EP93XX_VIC0 + 5)
+#define IRQ_EP93XX_AACINTR		(IRQ_EP93XX_VIC0 + 6)
+#define IRQ_EP93XX_DMAM2P0		(IRQ_EP93XX_VIC0 + 7)
+#define IRQ_EP93XX_DMAM2P1		(IRQ_EP93XX_VIC0 + 8)
+#define IRQ_EP93XX_DMAM2P2		(IRQ_EP93XX_VIC0 + 9)
+#define IRQ_EP93XX_DMAM2P3		(IRQ_EP93XX_VIC0 + 10)
+#define IRQ_EP93XX_DMAM2P4		(IRQ_EP93XX_VIC0 + 11)
+#define IRQ_EP93XX_DMAM2P5		(IRQ_EP93XX_VIC0 + 12)
+#define IRQ_EP93XX_DMAM2P6		(IRQ_EP93XX_VIC0 + 13)
+#define IRQ_EP93XX_DMAM2P7		(IRQ_EP93XX_VIC0 + 14)
+#define IRQ_EP93XX_DMAM2P8		(IRQ_EP93XX_VIC0 + 15)
+#define IRQ_EP93XX_DMAM2P9		(IRQ_EP93XX_VIC0 + 16)
+#define IRQ_EP93XX_DMAM2M0		(IRQ_EP93XX_VIC0 + 17)
+#define IRQ_EP93XX_DMAM2M1		(IRQ_EP93XX_VIC0 + 18)
+#define IRQ_EP93XX_GPIO0MUX		(IRQ_EP93XX_VIC0 + 19)
+#define IRQ_EP93XX_GPIO1MUX		(IRQ_EP93XX_VIC0 + 20)
+#define IRQ_EP93XX_GPIO2MUX		(IRQ_EP93XX_VIC0 + 21)
+#define IRQ_EP93XX_GPIO3MUX		(IRQ_EP93XX_VIC0 + 22)
+#define IRQ_EP93XX_UART1RX		(IRQ_EP93XX_VIC0 + 23)
+#define IRQ_EP93XX_UART1TX		(IRQ_EP93XX_VIC0 + 24)
+#define IRQ_EP93XX_UART2RX		(IRQ_EP93XX_VIC0 + 25)
+#define IRQ_EP93XX_UART2TX		(IRQ_EP93XX_VIC0 + 26)
+#define IRQ_EP93XX_UART3RX		(IRQ_EP93XX_VIC0 + 27)
+#define IRQ_EP93XX_UART3TX		(IRQ_EP93XX_VIC0 + 28)
+#define IRQ_EP93XX_KEY			(IRQ_EP93XX_VIC0 + 29)
+#define IRQ_EP93XX_TOUCH		(IRQ_EP93XX_VIC0 + 30)
+#define EP93XX_VIC1_VALID_IRQ_MASK	0x7ffffffc
+
+#define IRQ_EP93XX_VIC1			(IRQ_EP93XX_VIC0 + 32)
+
+#define IRQ_EP93XX_EXT0			(IRQ_EP93XX_VIC1 + 0)
+#define IRQ_EP93XX_EXT1			(IRQ_EP93XX_VIC1 + 1)
+#define IRQ_EP93XX_EXT2			(IRQ_EP93XX_VIC1 + 2)
+#define IRQ_EP93XX_64HZ			(IRQ_EP93XX_VIC1 + 3)
+#define IRQ_EP93XX_WATCHDOG		(IRQ_EP93XX_VIC1 + 4)
+#define IRQ_EP93XX_RTC			(IRQ_EP93XX_VIC1 + 5)
+#define IRQ_EP93XX_IRDA			(IRQ_EP93XX_VIC1 + 6)
+#define IRQ_EP93XX_ETHERNET		(IRQ_EP93XX_VIC1 + 7)
+#define IRQ_EP93XX_EXT3			(IRQ_EP93XX_VIC1 + 8)
+#define IRQ_EP93XX_PROG			(IRQ_EP93XX_VIC1 + 9)
+#define IRQ_EP93XX_1HZ			(IRQ_EP93XX_VIC1 + 10)
+#define IRQ_EP93XX_VSYNC		(IRQ_EP93XX_VIC1 + 11)
+#define IRQ_EP93XX_VIDEO_FIFO		(IRQ_EP93XX_VIC1 + 12)
+#define IRQ_EP93XX_SSP1RX		(IRQ_EP93XX_VIC1 + 13)
+#define IRQ_EP93XX_SSP1TX		(IRQ_EP93XX_VIC1 + 14)
+#define IRQ_EP93XX_GPIO4MUX		(IRQ_EP93XX_VIC1 + 15)
+#define IRQ_EP93XX_GPIO5MUX		(IRQ_EP93XX_VIC1 + 16)
+#define IRQ_EP93XX_GPIO6MUX		(IRQ_EP93XX_VIC1 + 17)
+#define IRQ_EP93XX_GPIO7MUX		(IRQ_EP93XX_VIC1 + 18)
+#define IRQ_EP93XX_TIMER3		(IRQ_EP93XX_VIC1 + 19)
+#define IRQ_EP93XX_UART1		(IRQ_EP93XX_VIC1 + 20)
+#define IRQ_EP93XX_SSP			(IRQ_EP93XX_VIC1 + 21)
+#define IRQ_EP93XX_UART2		(IRQ_EP93XX_VIC1 + 22)
+#define IRQ_EP93XX_UART3		(IRQ_EP93XX_VIC1 + 23)
+#define IRQ_EP93XX_USB			(IRQ_EP93XX_VIC1 + 24)
+#define IRQ_EP93XX_ETHERNET_PME		(IRQ_EP93XX_VIC1 + 25)
+#define IRQ_EP93XX_DSP			(IRQ_EP93XX_VIC1 + 26)
+#define IRQ_EP93XX_GPIO_AB		(IRQ_EP93XX_VIC1 + 27)
+#define IRQ_EP93XX_SAI			(IRQ_EP93XX_VIC1 + 28)
+#define EP93XX_VIC2_VALID_IRQ_MASK	0x1fffffff
+
+#define NR_EP93XX_IRQS			(IRQ_EP93XX_VIC1 + 32 + 24)
+
+#define EP93XX_BOARD_IRQ(x)		(NR_EP93XX_IRQS + (x))
+#define EP93XX_BOARD_IRQS		32
+
+#endif
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index e6ead8ded6ee..c121c459aa17 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -76,6 +76,7 @@ static void __init micro9_init_machine(void)
 MACHINE_START(MICRO9, "Contec Micro9-High")
 	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
@@ -88,6 +89,7 @@ MACHINE_END
 MACHINE_START(MICRO9M, "Contec Micro9-Mid")
 	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
@@ -100,6 +102,7 @@ MACHINE_END
 MACHINE_START(MICRO9L, "Contec Micro9-Lite")
 	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
@@ -112,6 +115,7 @@ MACHINE_END
 MACHINE_START(MICRO9S, "Contec Micro9-Slim")
 	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
index 5291053023b2..569e72413561 100644
--- a/arch/arm/mach-ep93xx/simone.c
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -119,6 +119,7 @@ static void __init simone_init_machine(void)
 MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
 	/* Maintainer: Ryan Mallon */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
index e200d69471e9..1dfb725671b1 100644
--- a/arch/arm/mach-ep93xx/snappercl15.c
+++ b/arch/arm/mach-ep93xx/snappercl15.c
@@ -153,6 +153,7 @@ static void __init snappercl15_init_machine(void)
 MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15")
 	/* Maintainer: Ryan Mallon */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
diff --git a/arch/arm/mach-ep93xx/soc.h b/arch/arm/mach-ep93xx/soc.h
index 94ef7f275f94..3245ebbd5069 100644
--- a/arch/arm/mach-ep93xx/soc.h
+++ b/arch/arm/mach-ep93xx/soc.h
@@ -9,7 +9,8 @@
 #ifndef _EP93XX_SOC_H
 #define _EP93XX_SOC_H
 
-#include <mach/ep93xx-regs.h>
+#include "ep93xx-regs.h"
+#include "irqs.h"
 
 /*
  * EP93xx Physical Memory Map:
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index 12eff8c8074d..d3de7283ecb3 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -22,7 +22,6 @@
 
 #include "gpio-ep93xx.h"
 #include "hardware.h"
-#include <mach/irqs.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
@@ -151,7 +150,7 @@ static struct platform_device ts72xx_nand_flash = {
 	.num_resources		= ARRAY_SIZE(ts72xx_nand_resource),
 };
 
-void __init ts72xx_register_flash(struct mtd_partition *parts, int n,
+static void __init ts72xx_register_flash(struct mtd_partition *parts, int n,
 				  resource_size_t start)
 {
 	/*
@@ -350,6 +349,7 @@ static void __init ts72xx_init_machine(void)
 MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ts72xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
@@ -413,6 +413,7 @@ static void __init bk3_init_machine(void)
 MACHINE_START(BK3, "Liebherr controller BK3.1")
 	/* Maintainer: Lukasz Majewski <lukma@denx.de> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ts72xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
index e46281e60bf7..30d9cf3791eb 100644
--- a/arch/arm/mach-ep93xx/vision_ep9307.c
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -302,6 +302,7 @@ static void __init vision_init_machine(void)
 MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307")
 	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS + EP93XX_BOARD_IRQS,
 	.map_io		= vision_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index f7d993628cb7..4d3b40e4049a 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -8,7 +8,6 @@
 menuconfig ARCH_EXYNOS
 	bool "Samsung Exynos"
 	depends on ARCH_MULTI_V7
-	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_AMBA
 	select ARM_GIC
 	select EXYNOS_IRQ_COMBINER
@@ -17,7 +16,6 @@ menuconfig ARCH_EXYNOS
 	select EXYNOS_PMU
 	select EXYNOS_SROM
 	select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS
-	select GPIOLIB
 	select HAVE_ARM_ARCH_TIMER if ARCH_EXYNOS5
 	select HAVE_ARM_SCU if SMP
 	select PINCTRL
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index 8b48326be9fd..51a247ca4da8 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -149,6 +149,7 @@ static void exynos_map_pmu(void)
 	np = of_find_matching_node(NULL, exynos_dt_pmu_match);
 	if (np)
 		pmu_base_addr = of_iomap(np, 0);
+	of_node_put(np);
 }
 
 static void __init exynos_init_irq(void)
diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c
index 2eaf2dbb8e81..2da5b60b59e2 100644
--- a/arch/arm/mach-exynos/firmware.c
+++ b/arch/arm/mach-exynos/firmware.c
@@ -60,8 +60,10 @@ static int exynos_cpu_boot(int cpu)
 	/*
 	 * Exynos3250 doesn't need to send smc command for secondary CPU boot
 	 * because Exynos3250 removes WFE in secure mode.
+	 *
+	 * On Exynos5 devices the call is ignored by trustzone firmware.
 	 */
-	if (soc_is_exynos3250())
+	if (!soc_is_exynos4210() && !soc_is_exynos4412())
 		return 0;
 
 	/*
diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c
index cd861c57d5ad..fd0dbeb93357 100644
--- a/arch/arm/mach-exynos/mcpm-exynos.c
+++ b/arch/arm/mach-exynos/mcpm-exynos.c
@@ -35,7 +35,6 @@ static bool secure_firmware __ro_after_init;
  */
 #define exynos_v7_exit_coherency_flush(level) \
 	asm volatile( \
-	"stmfd	sp!, {fp, ip}\n\t"\
 	"mrc	p15, 0, r0, c1, c0, 0	@ get SCTLR\n\t" \
 	"bic	r0, r0, #"__stringify(CR_C)"\n\t" \
 	"mcr	p15, 0, r0, c1, c0, 0	@ set SCTLR\n\t" \
@@ -50,11 +49,10 @@ static bool secure_firmware __ro_after_init;
 	"mcr	p15, 0, r0, c1, c0, 1	@ set ACTLR\n\t" \
 	"isb\n\t" \
 	"dsb\n\t" \
-	"ldmfd	sp!, {fp, ip}" \
 	: \
 	: "Ir" (pmu_base_addr + S5P_INFORM0) \
-	: "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \
-	  "r9", "r10", "lr", "memory")
+	: "r0", "r1", "r2", "r3", "r4", "r5", "r6", \
+	  "r9", "r10", "ip", "lr", "memory")
 
 static int exynos_cpu_powerup(unsigned int cpu, unsigned int cluster)
 {
diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig
index 728aff93fba9..b5e7cbfed119 100644
--- a/arch/arm/mach-footbridge/Kconfig
+++ b/arch/arm/mach-footbridge/Kconfig
@@ -1,37 +1,37 @@
 # SPDX-License-Identifier: GPL-2.0-only
-if ARCH_FOOTBRIDGE
+menuconfig ARCH_FOOTBRIDGE
+	bool "FootBridge Implementations"
+	depends on ARCH_MULTI_V4 && !(ARCH_MULTI_V4T || ARCH_MULTI_V5)
+	depends on !(ARCH_MOXART || ARCH_GEMINI || ARCH_SA1100)
+	depends on ATAGS
+	depends on CPU_LITTLE_ENDIAN
+	depends on MMU
+	select ARCH_NO_SG_CHAIN
+	select CPU_SA110
+	select FOOTBRIDGE
+	select NEED_MACH_MEMORY_H
+	help
+	  Support for systems based on the DC21285 companion chip
+	  ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
 
-menu "Footbridge Implementations"
+if ARCH_FOOTBRIDGE
 
 config ARCH_CATS
 	bool "CATS"
+	depends on UNUSED_BOARD_FILES
 	select CLKEVT_I8253
 	select CLKSRC_I8253
-	select FOOTBRIDGE_HOST
 	select ISA
-	select ISA_DMA
 	select FORCE_PCI
 	help
 	  Say Y here if you intend to run this kernel on the CATS.
 
 	  Saying N will reduce the size of the Footbridge kernel.
 
-config ARCH_EBSA285_ADDIN
-	bool "EBSA285 (addin mode)"
-	select ARCH_EBSA285
-	select FOOTBRIDGE_ADDIN
-	help
-	  Say Y here if you intend to run this kernel on the EBSA285 card
-	  in addin mode.
-
-	  Saying N will reduce the size of the Footbridge kernel.
-
 config ARCH_EBSA285_HOST
 	bool "EBSA285 (host mode)"
 	select ARCH_EBSA285
-	select FOOTBRIDGE_HOST
 	select ISA
-	select ISA_DMA
 	select ARCH_MAY_HAVE_PC_FDC
 	select FORCE_PCI
 	help
@@ -44,9 +44,7 @@ config ARCH_NETWINDER
 	bool "NetWinder"
 	select CLKEVT_I8253
 	select CLKSRC_I8253
-	select FOOTBRIDGE_HOST
 	select ISA
-	select ISA_DMA
 	select FORCE_PCI
 	help
 	  Say Y here if you intend to run this kernel on the Rebel.COM
@@ -56,22 +54,12 @@ config ARCH_NETWINDER
 
 	  Saying N will reduce the size of the Footbridge kernel.
 
-endmenu
-
 # Footbridge support
 config FOOTBRIDGE
-	bool
-
-# Footbridge in host mode
-config FOOTBRIDGE_HOST
-	bool
+	def_bool y
 	select ARCH_MIGHT_HAVE_PC_SERIO
+	select ISA_DMA_API
 
-# Footbridge in addin mode
-config FOOTBRIDGE_ADDIN
-	bool
-
-# EBSA285 board in either host or addin mode
 config ARCH_EBSA285
 	bool
 
diff --git a/arch/arm/mach-footbridge/Makefile b/arch/arm/mach-footbridge/Makefile
index 6262993c0555..55d570739f19 100644
--- a/arch/arm/mach-footbridge/Makefile
+++ b/arch/arm/mach-footbridge/Makefile
@@ -5,11 +5,11 @@
 
 # Object file lists.
 
-obj-y			:= common.o dma.o isa-irq.o
+obj-y			:= common.o isa-irq.o isa.o isa-rtc.o dma-isa.o
 
 pci-y			+= dc21285.o
 pci-$(CONFIG_ARCH_CATS) += cats-pci.o
-pci-$(CONFIG_ARCH_EBSA285_HOST) += ebsa285-pci.o
+pci-$(CONFIG_ARCH_EBSA285) += ebsa285-pci.o
 pci-$(CONFIG_ARCH_NETWINDER) += netwinder-pci.o
 
 obj-$(CONFIG_ARCH_CATS) += cats-hw.o isa-timer.o
@@ -18,4 +18,3 @@ obj-$(CONFIG_ARCH_NETWINDER) += netwinder-hw.o isa-timer.o
 
 obj-$(CONFIG_PCI)	+=$(pci-y)
 
-obj-$(CONFIG_ISA)	+= isa.o isa-rtc.o
diff --git a/arch/arm/mach-footbridge/Makefile.boot b/arch/arm/mach-footbridge/Makefile.boot
deleted file mode 100644
index e4313e912cac..000000000000
--- a/arch/arm/mach-footbridge/Makefile.boot
+++ /dev/null
@@ -1,5 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
-
diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c
index eee095f0e2f6..629e4676ed77 100644
--- a/arch/arm/mach-footbridge/common.c
+++ b/arch/arm/mach-footbridge/common.c
@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/spinlock.h>
+#include <linux/dma-direct.h>
 #include <video/vga.h>
 
 #include <asm/page.h>
@@ -27,6 +28,91 @@
 
 #include "common.h"
 
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <asm/hardware/dec21285.h>
+
+static int dc21285_get_irq(void)
+{
+	void __iomem *irqstatus = (void __iomem *)CSR_IRQ_STATUS;
+	u32 mask = readl(irqstatus);
+
+	if (mask & IRQ_MASK_SDRAMPARITY)
+		return IRQ_SDRAMPARITY;
+
+	if (mask & IRQ_MASK_UART_RX)
+		return IRQ_CONRX;
+
+	if (mask & IRQ_MASK_DMA1)
+		return IRQ_DMA1;
+
+	if (mask & IRQ_MASK_DMA2)
+		return IRQ_DMA2;
+
+	if (mask & IRQ_MASK_IN0)
+		return IRQ_IN0;
+
+	if (mask & IRQ_MASK_IN1)
+		return IRQ_IN1;
+
+	if (mask & IRQ_MASK_IN2)
+		return IRQ_IN2;
+
+	if (mask & IRQ_MASK_IN3)
+		return IRQ_IN3;
+
+	if (mask & IRQ_MASK_PCI)
+		return IRQ_PCI;
+
+	if (mask & IRQ_MASK_DOORBELLHOST)
+		return IRQ_DOORBELLHOST;
+
+	if (mask & IRQ_MASK_I2OINPOST)
+		return IRQ_I2OINPOST;
+
+	if (mask & IRQ_MASK_TIMER1)
+		return IRQ_TIMER1;
+
+	if (mask & IRQ_MASK_TIMER2)
+		return IRQ_TIMER2;
+
+	if (mask & IRQ_MASK_TIMER3)
+		return IRQ_TIMER3;
+
+	if (mask & IRQ_MASK_UART_TX)
+		return IRQ_CONTX;
+
+	if (mask & IRQ_MASK_PCI_ABORT)
+		return IRQ_PCI_ABORT;
+
+	if (mask & IRQ_MASK_PCI_SERR)
+		return IRQ_PCI_SERR;
+
+	if (mask & IRQ_MASK_DISCARD_TIMER)
+		return IRQ_DISCARD_TIMER;
+
+	if (mask & IRQ_MASK_PCI_DPERR)
+		return IRQ_PCI_DPERR;
+
+	if (mask & IRQ_MASK_PCI_PERR)
+		return IRQ_PCI_PERR;
+
+	return 0;
+}
+
+static void dc21285_handle_irq(struct pt_regs *regs)
+{
+	int irq;
+	do {
+		irq = dc21285_get_irq();
+		if (!irq)
+			break;
+
+		generic_handle_irq(irq);
+	} while (1);
+}
+
+
 unsigned int mem_fclk_21285 = 50000000;
 
 EXPORT_SYMBOL(mem_fclk_21285);
@@ -108,10 +194,9 @@ static void __init __fb_init_irq(void)
 
 void __init footbridge_init_irq(void)
 {
-	__fb_init_irq();
+	set_handle_irq(dc21285_handle_irq);
 
-	if (!footbridge_cfn_mode())
-		return;
+	__fb_init_irq();
 
 	if (machine_is_ebsa285())
 		/* The following is dependent on which slot
@@ -133,21 +218,13 @@ void __init footbridge_init_irq(void)
  * commented out since there is a "No Fix" problem with it.  Not mapping
  * it means that we have extra bullet protection on our feet.
  */
-static struct map_desc fb_common_io_desc[] __initdata = {
+static struct map_desc ebsa285_host_io_desc[] __initdata = {
 	{
 		.virtual	= ARMCSR_BASE,
 		.pfn		= __phys_to_pfn(DC21285_ARMCSR_BASE),
 		.length		= ARMCSR_SIZE,
 		.type		= MT_DEVICE,
-	}
-};
-
-/*
- * The mapping when the footbridge is in host mode.  We don't map any of
- * this when we are in add-in mode.
- */
-static struct map_desc ebsa285_host_io_desc[] __initdata = {
-#if defined(CONFIG_ARCH_FOOTBRIDGE) && defined(CONFIG_FOOTBRIDGE_HOST)
+	},
 	{
 		.virtual	= PCIMEM_BASE,
 		.pfn		= __phys_to_pfn(DC21285_PCI_MEM),
@@ -169,26 +246,12 @@ static struct map_desc ebsa285_host_io_desc[] __initdata = {
 		.length		= PCIIACK_SIZE,
 		.type		= MT_DEVICE,
 	},
-#endif
 };
 
 void __init footbridge_map_io(void)
 {
-	/*
-	 * Set up the common mapping first; we need this to
-	 * determine whether we're in host mode or not.
-	 */
-	iotable_init(fb_common_io_desc, ARRAY_SIZE(fb_common_io_desc));
-
-	/*
-	 * Now, work out what we've got to map in addition on this
-	 * platform.
-	 */
-	if (footbridge_cfn_mode()) {
-		iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc));
-		pci_map_io_early(__phys_to_pfn(DC21285_PCI_IO));
-	}
-
+	iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc));
+	pci_map_io_early(__phys_to_pfn(DC21285_PCI_IO));
 	vga_base = PCIMEM_BASE;
 }
 
@@ -218,47 +281,3 @@ void footbridge_restart(enum reboot_mode mode, const char *cmd)
 		*CSR_SA110_CNTL |= (1 << 13);
 	}
 }
-
-#ifdef CONFIG_FOOTBRIDGE_ADDIN
-
-static inline unsigned long fb_bus_sdram_offset(void)
-{
-	return *CSR_PCISDRAMBASE & 0xfffffff0;
-}
-
-/*
- * These two functions convert virtual addresses to PCI addresses and PCI
- * addresses to virtual addresses.  Note that it is only legal to use these
- * on memory obtained via get_zeroed_page or kmalloc.
- */
-unsigned long __virt_to_bus(unsigned long res)
-{
-	WARN_ON(res < PAGE_OFFSET || res >= (unsigned long)high_memory);
-
-	return res + (fb_bus_sdram_offset() - PAGE_OFFSET);
-}
-EXPORT_SYMBOL(__virt_to_bus);
-
-unsigned long __bus_to_virt(unsigned long res)
-{
-	res = res - (fb_bus_sdram_offset() - PAGE_OFFSET);
-
-	WARN_ON(res < PAGE_OFFSET || res >= (unsigned long)high_memory);
-
-	return res;
-}
-EXPORT_SYMBOL(__bus_to_virt);
-
-unsigned long __pfn_to_bus(unsigned long pfn)
-{
-	return __pfn_to_phys(pfn) + (fb_bus_sdram_offset() - PHYS_OFFSET);
-}
-EXPORT_SYMBOL(__pfn_to_bus);
-
-unsigned long __bus_to_pfn(unsigned long bus)
-{
-	return __phys_to_pfn(bus - (fb_bus_sdram_offset() - PHYS_OFFSET));
-}
-EXPORT_SYMBOL(__bus_to_pfn);
-
-#endif
diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c
index f9713dc561cf..f8920d0010de 100644
--- a/arch/arm/mach-footbridge/dc21285.c
+++ b/arch/arm/mach-footbridge/dc21285.c
@@ -5,6 +5,7 @@
  *  Copyright (C) 1998-2001 Russell King
  *  Copyright (C) 1998-2000 Phil Blundell
  */
+#include <linux/dma-map-ops.h>
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/interrupt.h>
@@ -241,13 +242,26 @@ static irqreturn_t dc21285_parity_irq(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static int dc21285_pci_bus_notifier(struct notifier_block *nb,
+				    unsigned long action,
+				    void *data)
+{
+	if (action != BUS_NOTIFY_ADD_DEVICE)
+		return NOTIFY_DONE;
+
+	dma_direct_set_offset(data, PHYS_OFFSET, BUS_OFFSET, SZ_256M);
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block dc21285_pci_bus_nb = {
+	.notifier_call = dc21285_pci_bus_notifier,
+};
+
 int __init dc21285_setup(int nr, struct pci_sys_data *sys)
 {
 	struct resource *res;
 
-	if (nr || !footbridge_cfn_mode())
-		return 0;
-
 	res = kcalloc(2, sizeof(struct resource), GFP_KERNEL);
 	if (!res) {
 		printk("out of memory for root bus resources");
@@ -269,6 +283,8 @@ int __init dc21285_setup(int nr, struct pci_sys_data *sys)
 	pci_add_resource_offset(&sys->resources, &res[0], sys->mem_offset);
 	pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset);
 
+	bus_register_notifier(&pci_bus_type, &dc21285_pci_bus_nb);
+
 	return 1;
 }
 
@@ -278,7 +294,6 @@ int __init dc21285_setup(int nr, struct pci_sys_data *sys)
 void __init dc21285_preinit(void)
 {
 	unsigned int mem_size, mem_mask;
-	int cfn_mode;
 
 	pcibios_min_mem = 0x81000000;
 
@@ -298,21 +313,15 @@ void __init dc21285_preinit(void)
 	*CSR_CSRBASEOFFSET    = 0;
 	*CSR_PCIADDR_EXTN     = 0;
 
-	cfn_mode = __footbridge_cfn_mode();
-
 	printk(KERN_INFO "PCI: DC21285 footbridge, revision %02lX, in "
-		"%s mode\n", *CSR_CLASSREV & 0xff, cfn_mode ?
-		"central function" : "addin");
-
-	if (footbridge_cfn_mode()) {
-		/*
-		 * Clear any existing errors - we aren't
-		 * interested in historical data...
-		 */
-		*CSR_SA110_CNTL	= (*CSR_SA110_CNTL & 0xffffde07) |
-				  SA110_CNTL_RXSERR;
-		*CSR_PCICMD = (*CSR_PCICMD & 0xffff) | PCICMD_ERROR_BITS;
-	}
+		"central function mode\n", *CSR_CLASSREV & 0xff);
+
+	/*
+	 * Clear any existing errors - we aren't
+	 * interested in historical data...
+	 */
+	*CSR_SA110_CNTL	= (*CSR_SA110_CNTL & 0xffffde07) | SA110_CNTL_RXSERR;
+	*CSR_PCICMD = (*CSR_PCICMD & 0xffff) | PCICMD_ERROR_BITS;
 
 	timer_setup(&serr_timer, dc21285_enable_error, 0);
 	timer_setup(&perr_timer, dc21285_enable_error, 0);
@@ -331,29 +340,18 @@ void __init dc21285_preinit(void)
 	dc21285_request_irq(IRQ_PCI_DPERR, dc21285_dparity_irq, 0,
 			    "PCI data parity", NULL);
 
-	if (cfn_mode) {
-		/*
-		 * Map our SDRAM at a known address in PCI space, just in case
-		 * the firmware had other ideas.  Using a nonzero base is
-		 * necessary, since some VGA cards forcefully use PCI addresses
-		 * in the range 0x000a0000 to 0x000c0000. (eg, S3 cards).
-		 */
-		*CSR_PCICSRBASE       = 0xf4000000;
-		*CSR_PCICSRIOBASE     = 0;
-		*CSR_PCISDRAMBASE     = __virt_to_bus(PAGE_OFFSET);
-		*CSR_PCIROMBASE       = 0;
-		*CSR_PCICMD = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
-			      PCI_COMMAND_INVALIDATE | PCICMD_ERROR_BITS;
-	} else if (footbridge_cfn_mode() != 0) {
-		/*
-		 * If we are not compiled to accept "add-in" mode, then
-		 * we are using a constant virt_to_bus translation which
-		 * can not hope to cater for the way the host BIOS  has
-		 * set up the machine.
-		 */
-		panic("PCI: this kernel is compiled for central "
-			"function mode only");
-	}
+	/*
+	 * Map our SDRAM at a known address in PCI space, just in case
+	 * the firmware had other ideas.  Using a nonzero base is
+	 * necessary, since some VGA cards forcefully use PCI addresses
+	 * in the range 0x000a0000 to 0x000c0000. (eg, S3 cards).
+	 */
+	*CSR_PCICSRBASE       = 0xf4000000;
+	*CSR_PCICSRIOBASE     = 0;
+	*CSR_PCISDRAMBASE     = BUS_OFFSET;
+	*CSR_PCIROMBASE       = 0;
+	*CSR_PCICMD = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
+		      PCI_COMMAND_INVALIDATE | PCICMD_ERROR_BITS;
 }
 
 void __init dc21285_postinit(void)
diff --git a/arch/arm/kernel/dma-isa.c b/arch/arm/mach-footbridge/dma-isa.c
index 2d90ecce5a11..937f5376d5e7 100644
--- a/arch/arm/kernel/dma-isa.c
+++ b/arch/arm/mach-footbridge/dma-isa.c
@@ -1,7 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- *  linux/arch/arm/kernel/dma-isa.c
- *
  *  Copyright (C) 1999-2000 Russell King
  *
  *  ISA DMA primitives
@@ -13,6 +11,7 @@
  *   arch/arm/kernel/dma-ebsa285.c
  *   Copyright (C) 1998 Phil Blundell
  */
+#include <linux/dma-map-ops.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <linux/dma-mapping.h>
@@ -20,6 +19,7 @@
 
 #include <asm/dma.h>
 #include <asm/mach/dma.h>
+#include <asm/hardware/dec21285.h>
 
 #define ISA_DMA_MASK		0
 #define ISA_DMA_MODE		1
@@ -157,7 +157,7 @@ static dma_t isa_dma[8];
 /*
  * ISA DMA always starts at channel 0
  */
-void __init isa_init_dma(void)
+static int __init isa_dma_init(void)
 {
 	/*
 	 * Try to autodetect presence of an ISA DMA controller.
@@ -222,4 +222,9 @@ void __init isa_init_dma(void)
 
 		request_dma(DMA_ISA_CASCADE, "cascade");
 	}
+
+	dma_direct_set_offset(&isa_dma_dev, PHYS_OFFSET, BUS_OFFSET, SZ_256M);
+
+	return 0;
 }
+core_initcall(isa_dma_init);
diff --git a/arch/arm/mach-footbridge/dma.c b/arch/arm/mach-footbridge/dma.c
deleted file mode 100644
index 86618074a7a5..000000000000
--- a/arch/arm/mach-footbridge/dma.c
+++ /dev/null
@@ -1,58 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- *  linux/arch/arm/kernel/dma-ebsa285.c
- *
- *  Copyright (C) 1998 Phil Blundell
- *
- * DMA functions specific to EBSA-285/CATS architectures
- *
- *  Changelog:
- *   09-Nov-1998 RMK	Split out ISA DMA functions to dma-isa.c
- *   17-Mar-1999 RMK	Allow any EBSA285-like architecture to have
- *			ISA DMA controllers.
- */
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-#include <linux/scatterlist.h>
-
-#include <asm/dma.h>
-
-#include <asm/mach/dma.h>
-#include <asm/hardware/dec21285.h>
-
-#if 0
-static int fb_dma_request(unsigned int chan, dma_t *dma)
-{
-	return -EINVAL;
-}
-
-static void fb_dma_enable(unsigned int chan, dma_t *dma)
-{
-}
-
-static void fb_dma_disable(unsigned int chan, dma_t *dma)
-{
-}
-
-static struct dma_ops fb_dma_ops = {
-	.type		= "fb",
-	.request	= fb_dma_request,
-	.enable		= fb_dma_enable,
-	.disable	= fb_dma_disable,
-};
-#endif
-
-static int __init fb_dma_init(void)
-{
-#if 0
-	dma[_DC21285_DMA(0)].d_ops = &fb_dma_ops;
-	dma[_DC21285_DMA(1)].d_ops = &fb_dma_ops;
-#endif
-#ifdef CONFIG_ISA_DMA
-	if (footbridge_cfn_mode())
-		isa_init_dma();
-#endif
-	return 0;
-}
-core_initcall(fb_dma_init);
diff --git a/arch/arm/mach-footbridge/include/mach/entry-macro.S b/arch/arm/mach-footbridge/include/mach/entry-macro.S
deleted file mode 100644
index dabbd5c54a78..000000000000
--- a/arch/arm/mach-footbridge/include/mach/entry-macro.S
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * arch/arm/mach-footbridge/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for footbridge-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <asm/hardware/dec21285.h>
-
-		.equ	dc21285_high, ARMCSR_BASE & 0xff000000
-		.equ	dc21285_low, ARMCSR_BASE & 0x00ffffff
-
-		.macro  get_irqnr_preamble, base, tmp
-		mov	\base, #dc21285_high
-		.if	dc21285_low
-		orr	\base, \base, #dc21285_low
-		.endif
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\irqstat, [\base, #0x180]	@ get interrupts
-
-		mov	\irqnr, #IRQ_SDRAMPARITY
-		tst	\irqstat, #IRQ_MASK_SDRAMPARITY
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_UART_RX
-		movne	\irqnr, #IRQ_CONRX
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_DMA1
-		movne	\irqnr, #IRQ_DMA1
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_DMA2
-		movne	\irqnr, #IRQ_DMA2
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_IN0
-		movne	\irqnr, #IRQ_IN0
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_IN1
-		movne	\irqnr, #IRQ_IN1
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_IN2
-		movne	\irqnr, #IRQ_IN2
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_IN3
-		movne	\irqnr, #IRQ_IN3
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_PCI
-		movne	\irqnr, #IRQ_PCI
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_DOORBELLHOST
-		movne	\irqnr, #IRQ_DOORBELLHOST
-		bne     1001f
-
-		tst	\irqstat, #IRQ_MASK_I2OINPOST
-		movne	\irqnr, #IRQ_I2OINPOST
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_TIMER1
-		movne	\irqnr, #IRQ_TIMER1
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_TIMER2
-		movne	\irqnr, #IRQ_TIMER2
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_TIMER3
-		movne	\irqnr, #IRQ_TIMER3
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_UART_TX
-		movne	\irqnr, #IRQ_CONTX
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_PCI_ABORT
-		movne	\irqnr, #IRQ_PCI_ABORT
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_PCI_SERR
-		movne	\irqnr, #IRQ_PCI_SERR
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_DISCARD_TIMER
-		movne	\irqnr, #IRQ_DISCARD_TIMER
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_PCI_DPERR
-		movne	\irqnr, #IRQ_PCI_DPERR
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_PCI_PERR
-		movne	\irqnr, #IRQ_PCI_PERR
-1001:
-		.endm
-
diff --git a/arch/arm/mach-footbridge/include/mach/hardware.h b/arch/arm/mach-footbridge/include/mach/hardware.h
index ecaf6e7388d9..985ad3a95671 100644
--- a/arch/arm/mach-footbridge/include/mach/hardware.h
+++ b/arch/arm/mach-footbridge/include/mach/hardware.h
@@ -21,32 +21,26 @@
  * 0xf0000000	0x80000000	16MB	ISA memory
  */
 
-#ifdef CONFIG_MMU
-#define MMU_IO(a, b)	(a)
-#else
-#define MMU_IO(a, b)	(b)
-#endif
-
 #define XBUS_SIZE		0x00100000
-#define XBUS_BASE		MMU_IO(0xff800000, 0x40000000)
+#define XBUS_BASE		0xff800000
 
 #define ARMCSR_SIZE		0x00100000
-#define ARMCSR_BASE		MMU_IO(0xfe000000, 0x42000000)
+#define ARMCSR_BASE		0xfe000000
 
 #define WFLUSH_SIZE		0x00100000
-#define WFLUSH_BASE		MMU_IO(0xfd000000, 0x78000000)
+#define WFLUSH_BASE		0xfd000000
 
 #define PCIIACK_SIZE		0x00100000
-#define PCIIACK_BASE		MMU_IO(0xfc000000, 0x79000000)
+#define PCIIACK_BASE		0xfc000000
 
 #define PCICFG1_SIZE		0x01000000
-#define PCICFG1_BASE		MMU_IO(0xfb000000, 0x7a000000)
+#define PCICFG1_BASE		0xfb000000
 
 #define PCICFG0_SIZE		0x01000000
-#define PCICFG0_BASE		MMU_IO(0xfa000000, 0x7b000000)
+#define PCICFG0_BASE		0xfa000000
 
 #define PCIMEM_SIZE		0x01000000
-#define PCIMEM_BASE		MMU_IO(0xf0000000, 0x80000000)
+#define PCIMEM_BASE		0xf0000000
 
 #define XBUS_CS2		0x40012000
 
diff --git a/arch/arm/mach-footbridge/include/mach/io.h b/arch/arm/mach-footbridge/include/mach/io.h
deleted file mode 100644
index 4e18b921373f..000000000000
--- a/arch/arm/mach-footbridge/include/mach/io.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  arch/arm/mach-footbridge/include/mach/io.h
- *
- *  Copyright (C) 1997-1999 Russell King
- *
- *  Modifications:
- *   06-12-1997	RMK	Created.
- *   07-04-1999	RMK	Major cleanup
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-/*
- * Translation of various i/o addresses to host addresses for !CONFIG_MMU
- */
-#define PCIO_BASE       0x7c000000
-#define __io(a)			((void __iomem *)(PCIO_BASE + (a)))
-
-#endif
diff --git a/arch/arm/mach-footbridge/include/mach/isa-dma.h b/arch/arm/mach-footbridge/include/mach/isa-dma.h
index 8a1b991076e1..b10731a1f66a 100644
--- a/arch/arm/mach-footbridge/include/mach/isa-dma.h
+++ b/arch/arm/mach-footbridge/include/mach/isa-dma.h
@@ -10,17 +10,9 @@
 #ifndef __ASM_ARCH_DMA_H
 #define __ASM_ARCH_DMA_H
 
-/*
- * The 21285 has two internal DMA channels; we call these 8 and 9.
- * On CATS hardware we have an additional eight ISA dma channels
- * numbered 0..7.
- */
-#define _ISA_DMA(x)		(0+(x))
-#define _DC21285_DMA(x)		(8+(x))
-
-#define MAX_DMA_CHANNELS	10
+#define MAX_DMA_CHANNELS	8
 
-#define DMA_FLOPPY		_ISA_DMA(2)
-#define DMA_ISA_CASCADE		_ISA_DMA(4)
+#define DMA_FLOPPY		(2)
+#define DMA_ISA_CASCADE		(4)
 
 #endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-footbridge/include/mach/memory.h b/arch/arm/mach-footbridge/include/mach/memory.h
index 46fd4a8872b9..9516877667d7 100644
--- a/arch/arm/mach-footbridge/include/mach/memory.h
+++ b/arch/arm/mach-footbridge/include/mach/memory.h
@@ -16,41 +16,6 @@
 #ifndef __ASM_ARCH_MEMORY_H
 #define __ASM_ARCH_MEMORY_H
 
-
-#if defined(CONFIG_FOOTBRIDGE_ADDIN)
-/*
- * If we may be using add-in footbridge mode, then we must
- * use the out-of-line translation that makes use of the
- * PCI BAR
- */
-#ifndef __ASSEMBLY__
-extern unsigned long __virt_to_bus(unsigned long);
-extern unsigned long __bus_to_virt(unsigned long);
-extern unsigned long __pfn_to_bus(unsigned long);
-extern unsigned long __bus_to_pfn(unsigned long);
-#endif
-#define __virt_to_bus	__virt_to_bus
-#define __bus_to_virt	__bus_to_virt
-
-#elif defined(CONFIG_FOOTBRIDGE_HOST)
-
-/*
- * The footbridge is programmed to expose the system RAM at 0xe0000000.
- * The requirement is that the RAM isn't placed at bus address 0, which
- * would clash with VGA cards.
- */
-#define BUS_OFFSET		0xe0000000
-#define __virt_to_bus(x)	((x) + (BUS_OFFSET - PAGE_OFFSET))
-#define __bus_to_virt(x)	((x) - (BUS_OFFSET - PAGE_OFFSET))
-#define __pfn_to_bus(x)		(__pfn_to_phys(x) + (BUS_OFFSET - PHYS_OFFSET))
-#define __bus_to_pfn(x)		__phys_to_pfn((x) - (BUS_OFFSET - PHYS_OFFSET))
-
-#else
-
-#error "Undefined footbridge mode"
-
-#endif
-
 /*
  * Cache flushing area.
  */
diff --git a/arch/arm/mach-footbridge/isa.c b/arch/arm/mach-footbridge/isa.c
index ec5af521cf95..84caccddce44 100644
--- a/arch/arm/mach-footbridge/isa.c
+++ b/arch/arm/mach-footbridge/isa.c
@@ -79,16 +79,12 @@ static int __init footbridge_isa_init(void)
 {
 	int err = 0;
 
-	if (!footbridge_cfn_mode())
-		return 0;
-
 	/* Personal server doesn't have RTC */
-	if (!machine_is_personal_server()) {
-		isa_rtc_init();
-		err = platform_device_register(&rtc_device);
-		if (err)
-			printk(KERN_ERR "Unable to register RTC device: %d\n", err);
-	}
+	isa_rtc_init();
+	err = platform_device_register(&rtc_device);
+	if (err)
+		printk(KERN_ERR "Unable to register RTC device: %d\n", err);
+
 	err = platform_device_register(&serial_device);
 	if (err)
 		printk(KERN_ERR "Unable to register serial device: %d\n", err);
diff --git a/arch/arm/mach-gemini/Kconfig b/arch/arm/mach-gemini/Kconfig
index 969674ea5f17..f436a2009eca 100644
--- a/arch/arm/mach-gemini/Kconfig
+++ b/arch/arm/mach-gemini/Kconfig
@@ -2,6 +2,7 @@
 menuconfig ARCH_GEMINI
 	bool "Cortina Systems Gemini"
 	depends on ARCH_MULTI_V4
+	depends on CPU_LITTLE_ENDIAN
 	select ARCH_HAS_RESET_CONTROLLER
 	select ARM_AMBA
 	select ARM_APPENDED_DTB # Old Redboot bootloaders deployed
diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig
index 9de38ce8124f..c2d6ef6b3927 100644
--- a/arch/arm/mach-highbank/Kconfig
+++ b/arch/arm/mach-highbank/Kconfig
@@ -2,7 +2,6 @@
 config ARCH_HIGHBANK
 	bool "Calxeda ECX-1000/2000 (Highbank/Midway)"
 	depends on ARCH_MULTI_V7
-	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_AMBA
 	select ARM_ERRATA_764369 if SMP
 	select ARM_ERRATA_775420
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index db607955a7e4..5d4f977ac7d2 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -98,7 +98,7 @@ static int highbank_platform_notifier(struct notifier_block *nb,
 	if (of_property_read_bool(dev->of_node, "dma-coherent")) {
 		val = readl(sregs_base + reg);
 		writel(val | 0xff01, sregs_base + reg);
-		set_dma_ops(dev, &arm_coherent_dma_ops);
+		dev->dma_coherent = true;
 	}
 
 	return NOTIFY_OK;
diff --git a/arch/arm/mach-hisi/Kconfig b/arch/arm/mach-hisi/Kconfig
index 2e980f834a6a..7b3440687176 100644
--- a/arch/arm/mach-hisi/Kconfig
+++ b/arch/arm/mach-hisi/Kconfig
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 config ARCH_HISI
 	bool "Hisilicon SoC Support"
-	depends on ARCH_MULTI_V7 || ARCH_MULTI_V5
+	depends on ARCH_MULTI_V7 || (ARCH_MULTI_V5 && CPU_LITTLE_ENDIAN)
 	select ARM_AMBA
 	select ARM_GIC if ARCH_MULTI_V7
 	select ARM_TIMER_SP804
@@ -40,7 +40,7 @@ config ARCH_HIP04
 	select HAVE_ARM_ARCH_TIMER
 	select MCPM if SMP
 	select MCPM_QUAD_CLUSTER if SMP
-	select GENERIC_IRQ_EFFECTIVE_AFF_MASK
+	select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP
 	help
 	  Support for Hisilicon HiP04 SoC family
 
diff --git a/arch/arm/mach-hisi/platsmp.c b/arch/arm/mach-hisi/platsmp.c
index a56cc64deeb8..9ce93e0b6cdc 100644
--- a/arch/arm/mach-hisi/platsmp.c
+++ b/arch/arm/mach-hisi/platsmp.c
@@ -67,14 +67,17 @@ static void __init hi3xxx_smp_prepare_cpus(unsigned int max_cpus)
 		}
 		ctrl_base = of_iomap(np, 0);
 		if (!ctrl_base) {
+			of_node_put(np);
 			pr_err("failed to map address\n");
 			return;
 		}
 		if (of_property_read_u32(np, "smp-offset", &offset) < 0) {
+			of_node_put(np);
 			pr_err("failed to find smp-offset property\n");
 			return;
 		}
 		ctrl_base += offset;
+		of_node_put(np);
 	}
 }
 
@@ -160,6 +163,7 @@ static int hip01_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	if (WARN_ON(!node))
 		return -1;
 	ctrl_base = of_iomap(node, 0);
+	of_node_put(node);
 
 	/* set the secondary core boot from DDR */
 	remap_reg_value = readl_relaxed(ctrl_base + REG_SC_CTRL);
diff --git a/arch/arm/mach-hpe/Kconfig b/arch/arm/mach-hpe/Kconfig
new file mode 100644
index 000000000000..3372bbf38d38
--- /dev/null
+++ b/arch/arm/mach-hpe/Kconfig
@@ -0,0 +1,23 @@
+menuconfig ARCH_HPE
+	bool "HPE SoC support"
+	depends on ARCH_MULTI_V7
+	help
+	  This enables support for HPE ARM based BMC chips.
+if ARCH_HPE
+
+config ARCH_HPE_GXP
+	bool "HPE GXP SoC"
+	depends on ARCH_MULTI_V7
+	select ARM_VIC
+	select GENERIC_IRQ_CHIP
+	select CLKSRC_MMIO
+	help
+	  HPE GXP is the name of the HPE Soc. This SoC is used to implement many
+	  BMC features at HPE. It supports ARMv7 architecture based on the Cortex
+	  A9 core. It is capable of using an AXI bus to which a memory controller
+	  is attached. It has multiple SPI interfaces to connect boot flash and
+	  BIOS flash. It uses a 10/100/1000 MAC for network connectivity. It
+	  has multiple i2c engines to drive connectivity with a host
+	  infrastructure.
+
+endif
diff --git a/arch/arm/mach-hpe/Makefile b/arch/arm/mach-hpe/Makefile
new file mode 100644
index 000000000000..8b0a91234df4
--- /dev/null
+++ b/arch/arm/mach-hpe/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_ARCH_HPE_GXP) += gxp.o
diff --git a/arch/arm/mach-hpe/gxp.c b/arch/arm/mach-hpe/gxp.c
new file mode 100644
index 000000000000..ef3341373006
--- /dev/null
+++ b/arch/arm/mach-hpe/gxp.c
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (C) 2022 Hewlett-Packard Enterprise Development Company, L.P. */
+
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+
+static const char * const gxp_board_dt_compat[] = {
+	"hpe,gxp",
+	NULL,
+};
+
+DT_MACHINE_START(GXP_DT, "HPE GXP")
+	.dt_compat	= gxp_board_dt_compat,
+	.l2c_aux_val = 0,
+	.l2c_aux_mask = ~0,
+MACHINE_END
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index f296bac467c8..ab767f059929 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0-only
 menuconfig ARCH_MXC
 	bool "Freescale i.MX family"
-	depends on ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 || ARM_SINGLE_ARMV7M
-	select ARCH_SUPPORTS_BIG_ENDIAN
+	depends on ((ARCH_MULTI_V4T || ARCH_MULTI_V5) && CPU_LITTLE_ENDIAN) || \
+		ARCH_MULTI_V6_V7 || ARM_SINGLE_ARMV7M
 	select CLKSRC_IMX_GPT
 	select GENERIC_IRQ_CHIP
 	select GPIOLIB
@@ -96,7 +96,7 @@ config SOC_IMX5
 	select HAVE_IMX_SRC
 	select MXC_TZIC
 
-config	SOC_IMX50
+config SOC_IMX50
 	bool "i.MX50 support"
 	select PINCTRL_IMX50
 	select SOC_IMX5
@@ -111,7 +111,7 @@ config SOC_IMX51
 	help
 	  This enables support for Freescale i.MX51 processor
 
-config	SOC_IMX53
+config SOC_IMX53
 	bool "i.MX53 support"
 	select PINCTRL_IMX53
 	select SOC_IMX5
@@ -216,7 +216,7 @@ config SOC_IMX7D
 	select SOC_IMX7D_CM4 if ARM_SINGLE_ARMV7M
 	select ARM_ERRATA_814220 if ARCH_MULTI_V7
 	help
-		This enables support for Freescale i.MX7 Dual processor.
+	  This enables support for Freescale i.MX7 Dual processor.
 
 config SOC_IMX7ULP
 	bool "i.MX7ULP support"
@@ -227,6 +227,13 @@ config SOC_IMX7ULP
 	help
 	  This enables support for Freescale i.MX7 Ultra Low Power processor.
 
+config SOC_IMXRT
+	bool "i.MXRT support"
+	depends on ARM_SINGLE_ARMV7M
+	select ARMV7M_SYSTICK if ARM_SINGLE_ARMV7M
+	help
+	  This enables support for Freescale i.MXRT Crossover processor.
+
 config SOC_VF610
 	bool "Vybrid Family VF610 support"
 	select ARM_GIC if ARCH_MULTI_V7
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index d5291ed9186a..6fb3965b9ae6 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -63,6 +63,8 @@ obj-$(CONFIG_SOC_IMX50) += mach-imx50.o
 obj-$(CONFIG_SOC_IMX51) += mach-imx51.o
 obj-$(CONFIG_SOC_IMX53) += mach-imx53.o
 
+obj-$(CONFIG_SOC_IMXRT) += mach-imxrt.o
+
 obj-$(CONFIG_SOC_VF610) += mach-vf610.o
 
 obj-$(CONFIG_SOC_LS1021A) += mach-ls1021a.o
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
deleted file mode 100644
index e69de29bb2d1..000000000000
--- a/arch/arm/mach-imx/Makefile.boot
+++ /dev/null
diff --git a/arch/arm/mach-imx/cpu-imx25.c b/arch/arm/mach-imx/cpu-imx25.c
index b2e1963f473d..3e63445cde06 100644
--- a/arch/arm/mach-imx/cpu-imx25.c
+++ b/arch/arm/mach-imx/cpu-imx25.c
@@ -32,6 +32,8 @@ static int mx25_read_cpu_rev(void)
 		return IMX_CHIP_REVISION_1_0;
 	case 0x01:
 		return IMX_CHIP_REVISION_1_1;
+	case 0x02:
+		return IMX_CHIP_REVISION_1_2;
 	default:
 		return IMX_CHIP_REVISION_UNKNOWN;
 	}
diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c
index 094337dc1bc7..d086cbae09c3 100644
--- a/arch/arm/mach-imx/cpuidle-imx6q.c
+++ b/arch/arm/mach-imx/cpuidle-imx6q.c
@@ -3,6 +3,7 @@
  * Copyright (C) 2012 Freescale Semiconductor, Inc.
  */
 
+#include <linux/context_tracking.h>
 #include <linux/cpuidle.h>
 #include <linux/module.h>
 #include <asm/cpuidle.h>
@@ -24,9 +25,9 @@ static int imx6q_enter_wait(struct cpuidle_device *dev,
 		imx6_set_lpm(WAIT_UNCLOCKED);
 	raw_spin_unlock(&cpuidle_lock);
 
-	rcu_idle_enter();
+	ct_idle_enter();
 	cpu_do_idle();
-	rcu_idle_exit();
+	ct_idle_exit();
 
 	raw_spin_lock(&cpuidle_lock);
 	if (num_idle_cpus-- == num_online_cpus())
diff --git a/arch/arm/mach-imx/mach-imxrt.c b/arch/arm/mach-imx/mach-imxrt.c
new file mode 100644
index 000000000000..2063a3059c84
--- /dev/null
+++ b/arch/arm/mach-imx/mach-imxrt.c
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019
+ * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
+ */
+
+#include <linux/kernel.h>
+#include <asm/mach/arch.h>
+#include <asm/v7m.h>
+
+static const char *const imxrt_compat[] __initconst = {
+	"fsl,imxrt1050",
+	NULL
+};
+
+DT_MACHINE_START(IMXRTDT, "IMXRT (Device Tree Support)")
+	.dt_compat = imxrt_compat,
+	.restart = armv7m_restart,
+MACHINE_END
diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig
deleted file mode 100644
index 63a0ca82659a..000000000000
--- a/arch/arm/mach-integrator/Kconfig
+++ /dev/null
@@ -1,160 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-menuconfig ARCH_INTEGRATOR
-	bool "ARM Ltd. Integrator family"
-	depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V6
-	select ARM_AMBA
-	select CMA
-	select DMA_CMA
-	select HAVE_TCM
-	select CLK_ICST
-	select MFD_SYSCON
-	select PLAT_VERSATILE
-	select POWER_RESET
-	select POWER_RESET_VERSATILE
-	select POWER_SUPPLY
-	select SOC_INTEGRATOR_CM
-	select VERSATILE_FPGA_IRQ
-	help
-	  Support for ARM's Integrator platform.
-
-if ARCH_INTEGRATOR
-
-config ARCH_INTEGRATOR_AP
-	bool "Support Integrator/AP and Integrator/PP2 platforms"
-	select INTEGRATOR_AP_TIMER
-	select SERIAL_AMBA_PL010 if TTY
-	select SERIAL_AMBA_PL010_CONSOLE if TTY
-	select SOC_BUS
-	help
-	  Include support for the ARM(R) Integrator/AP and
-	  Integrator/PP2 platforms.
-
-config INTEGRATOR_IMPD1
-	bool "Include support for Integrator/IM-PD1"
-	depends on ARCH_INTEGRATOR_AP
-	select ARM_VIC
-	select GPIO_PL061
-	select GPIOLIB
-	select REGULATOR
-	select REGULATOR_FIXED_VOLTAGE
-	help
-	  The IM-PD1 is an add-on logic module for the Integrator which
-	  allows ARM(R) Ltd PrimeCells to be developed and evaluated.
-	  The IM-PD1 can be found on the Integrator/PP2 platform.
-
-config INTEGRATOR_CM7TDMI
-	bool "Integrator/CM7TDMI core module"
-	depends on ARCH_INTEGRATOR_AP
-	depends on ARCH_MULTI_V4 && !MMU
-	select CPU_ARM7TDMI
-
-config INTEGRATOR_CM720T
-	bool "Integrator/CM720T core module"
-	depends on ARCH_INTEGRATOR_AP
-	depends on ARCH_MULTI_V4T
-	select CPU_ARM720T
-
-config INTEGRATOR_CM740T
-	bool "Integrator/CM740T core module"
-	depends on ARCH_INTEGRATOR_AP
-	depends on ARCH_MULTI_V4T && !MMU
-	select CPU_ARM740T
-
-config INTEGRATOR_CM920T
-	bool "Integrator/CM920T core module"
-	depends on ARCH_INTEGRATOR_AP
-	depends on ARCH_MULTI_V4T
-	select CPU_ARM920T
-
-config INTEGRATOR_CM922T_XA10
-	bool "Integrator/CM922T-XA10 core module"
-	depends on ARCH_MULTI_V4T
-	depends on ARCH_INTEGRATOR_AP
-	select CPU_ARM922T
-
-config INTEGRATOR_CM926EJS
-	bool "Integrator/CM926EJ-S core module"
-	depends on ARCH_INTEGRATOR_AP
-	depends on ARCH_MULTI_V5
-	select CPU_ARM926T
-
-config INTEGRATOR_CM940T
-	bool "Integrator/CM940T core module"
-	depends on ARCH_INTEGRATOR_AP
-	depends on ARCH_MULTI_V4T && !MMU
-	select CPU_ARM940T
-
-config INTEGRATOR_CM946ES
-	bool "Integrator/CM946E-S core module"
-	depends on ARCH_INTEGRATOR_AP
-	depends on ARCH_MULTI_V5 && !MMU
-	select CPU_ARM946E
-
-config INTEGRATOR_CM966ES
-	bool "Integrator/CM966E-S core module"
-	depends on ARCH_INTEGRATOR_AP
-	depends on BROKEN # no kernel support
-
-config INTEGRATOR_CM10200E_REV0
-	bool "Integrator/CM10200E rev.0 core module"
-	depends on ARCH_INTEGRATOR_AP && n
-	depends on ARCH_MULTI_V5
-	select CPU_ARM1020
-
-config INTEGRATOR_CM10200E
-	bool "Integrator/CM10200E core module"
-	depends on ARCH_INTEGRATOR_AP && n
-	depends on ARCH_MULTI_V5
-	select CPU_ARM1020E
-
-config INTEGRATOR_CM10220E
-	bool "Integrator/CM10220E core module"
-	depends on ARCH_INTEGRATOR_AP
-	depends on ARCH_MULTI_V5
-	select CPU_ARM1022
-
-config INTEGRATOR_CM1026EJS
-	bool "Integrator/CM1026EJ-S core module"
-	depends on ARCH_INTEGRATOR_AP
-	depends on ARCH_MULTI_V5
-	select CPU_ARM1026
-
-config INTEGRATOR_CM1136JFS
-	bool "Integrator/CM1136JF-S core module"
-	depends on ARCH_INTEGRATOR_AP
-	depends on ARCH_MULTI_V6
-	select CPU_V6
-
-config ARCH_INTEGRATOR_CP
-	bool "Support Integrator/CP platform"
-	depends on (!MMU || ARCH_MULTI_V5 || ARCH_MULTI_V6)
-	select ARM_TIMER_SP804
-	select SERIAL_AMBA_PL011 if TTY
-	select SERIAL_AMBA_PL011_CONSOLE if TTY
-	select SOC_BUS
-	help
-	  Include support for the ARM(R) Integrator CP platform.
-
-config INTEGRATOR_CT7T
-	bool "Integrator/CT7TD (ARM7TDMI) core tile"
-	depends on ARCH_INTEGRATOR_CP
-	depends on ARCH_MULTI_V4T && !MMU
-	select CPU_ARM7TDMI
-
-config INTEGRATOR_CT926
-	bool "Integrator/CT926 (ARM926EJ-S) core tile"
-	depends on ARCH_INTEGRATOR_CP
-	depends on ARCH_MULTI_V5
-	select CPU_ARM926T
-
-config INTEGRATOR_CTB36
-	bool "Integrator/CTB36 (ARM1136JF-S) core tile"
-	depends on ARCH_INTEGRATOR_CP
-	depends on ARCH_MULTI_V6
-	select CPU_V6
-
-config ARCH_CINTEGRATOR
-	depends on ARCH_INTEGRATOR_CP
-	def_bool y
-
-endif
diff --git a/arch/arm/mach-integrator/Makefile b/arch/arm/mach-integrator/Makefile
deleted file mode 100644
index 7857a55c90b0..000000000000
--- a/arch/arm/mach-integrator/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y					:= core.o
-obj-$(CONFIG_ARCH_INTEGRATOR_AP)	+= integrator_ap.o
-obj-$(CONFIG_ARCH_INTEGRATOR_CP)	+= integrator_cp.o
diff --git a/arch/arm/mach-iop32x/Kconfig b/arch/arm/mach-iop32x/Kconfig
index f1f342cb0509..761fbb04faa1 100644
--- a/arch/arm/mach-iop32x/Kconfig
+++ b/arch/arm/mach-iop32x/Kconfig
@@ -1,9 +1,18 @@
 # SPDX-License-Identifier: GPL-2.0
-if ARCH_IOP32X
-
-menu "IOP32x Implementation Options"
+menuconfig ARCH_IOP32X
+	bool "IOP32x-based platforms"
+	depends on ARCH_MULTI_V5
+	depends on CPU_LITTLE_ENDIAN
+	depends on ATAGS && UNUSED_BOARD_FILES
+	select CPU_XSCALE
+	select GPIO_IOP
+	select GPIOLIB
+	select FORCE_PCI
+	help
+	  Support for Intel's 80219 and IOP32X (XScale) family of
+	  processors.
 
-comment "IOP32x Platform Types"
+if ARCH_IOP32X
 
 config MACH_EP80219
 	bool
@@ -42,6 +51,4 @@ config MACH_EM7210
 	  board. Say also Y here if you have a SS4000e Baxter Creek NAS
 	  appliance."
 
-endmenu
-
 endif
diff --git a/arch/arm/mach-iop32x/Makefile.boot b/arch/arm/mach-iop32x/Makefile.boot
deleted file mode 100644
index 5c3af01c4000..000000000000
--- a/arch/arm/mach-iop32x/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-   zreladdr-y	+= 0xa0008000
-params_phys-y	:= 0xa0000100
-initrd_phys-y	:= 0xa0800000
diff --git a/arch/arm/mach-iop32x/cp6.c b/arch/arm/mach-iop32x/cp6.c
index ec74b07fb7e3..7135a0ac9949 100644
--- a/arch/arm/mach-iop32x/cp6.c
+++ b/arch/arm/mach-iop32x/cp6.c
@@ -7,7 +7,9 @@
 #include <asm/traps.h>
 #include <asm/ptrace.h>
 
-static int cp6_trap(struct pt_regs *regs, unsigned int instr)
+#include "iop3xx.h"
+
+void iop_enable_cp6(void)
 {
 	u32 temp;
 
@@ -16,7 +18,15 @@ static int cp6_trap(struct pt_regs *regs, unsigned int instr)
 		"mrc	p15, 0, %0, c15, c1, 0\n\t"
 		"orr	%0, %0, #(1 << 6)\n\t"
 		"mcr	p15, 0, %0, c15, c1, 0\n\t"
+		"mrc	p15, 0, %0, c15, c1, 0\n\t"
+		"mov	%0, %0\n\t"
+		"sub	pc, pc, #4  @ cp_wait\n\t"
 		: "=r"(temp));
+}
+
+static int cp6_trap(struct pt_regs *regs, unsigned int instr)
+{
+	iop_enable_cp6();
 
 	return 0;
 }
diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c
index d43ced3cd4e7..ac130aba5a6e 100644
--- a/arch/arm/mach-iop32x/em7210.c
+++ b/arch/arm/mach-iop32x/em7210.c
@@ -223,6 +223,7 @@ static void __init em7210_init_machine(void)
 
 MACHINE_START(EM7210, "Lanner EM7210")
 	.atag_offset	= 0x100,
+	.nr_irqs	= IOP32X_NR_IRQS,
 	.map_io		= em7210_map_io,
 	.init_irq	= iop32x_init_irq,
 	.init_time	= em7210_timer_init,
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index 2fe0f77d1f1d..cd6e7da2ea10 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -205,6 +205,7 @@ static void __init glantank_init_machine(void)
 MACHINE_START(GLANTANK, "GLAN Tank")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= IOP32X_NR_IRQS,
 	.map_io		= glantank_map_io,
 	.init_irq	= iop32x_init_irq,
 	.init_time	= glantank_timer_init,
diff --git a/arch/arm/mach-iop32x/include/mach/entry-macro.S b/arch/arm/mach-iop32x/include/mach/entry-macro.S
deleted file mode 100644
index 8e6766d4621e..000000000000
--- a/arch/arm/mach-iop32x/include/mach/entry-macro.S
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * arch/arm/mach-iop32x/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for IOP32x-based platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-	.macro get_irqnr_preamble, base, tmp
-	mrc	p15, 0, \tmp, c15, c1, 0
-	orr	\tmp, \tmp, #(1 << 6)
-	mcr	p15, 0, \tmp, c15, c1, 0	@ Enable cp6 access
-	mrc	p15, 0, \tmp, c15, c1, 0
-	mov	\tmp, \tmp
-	sub	pc, pc, #4			@ cp_wait
-	.endm
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	mrc     p6, 0, \irqstat, c8, c0, 0	@ Read IINTSRC
-	cmp     \irqstat, #0
-	clzne   \irqnr, \irqstat
-	rsbne   \irqnr, \irqnr, #31
-	.endm
-
-	.macro arch_ret_to_user, tmp1, tmp2
-	mrc	p15, 0, \tmp1, c15, c1, 0
-	ands	\tmp2, \tmp1, #(1 << 6)
-	bicne	\tmp1, \tmp1, #(1 << 6)
-	mcrne	p15, 0, \tmp1, c15, c1, 0	@ Disable cp6 access
-	.endm
diff --git a/arch/arm/mach-iop32x/include/mach/irqs.h b/arch/arm/mach-iop32x/include/mach/irqs.h
deleted file mode 100644
index c4e78df428e8..000000000000
--- a/arch/arm/mach-iop32x/include/mach/irqs.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-iop32x/include/mach/irqs.h
- *
- * Author:	Rory Bolt <rorybolt@pacbell.net>
- * Copyright:	(C) 2002 Rory Bolt
- */
-
-#ifndef __IRQS_H
-#define __IRQS_H
-
-#define NR_IRQS			32
-
-#endif
diff --git a/arch/arm/mach-iop32x/include/mach/uncompress.h b/arch/arm/mach-iop32x/include/mach/uncompress.h
deleted file mode 100644
index c8548875d942..000000000000
--- a/arch/arm/mach-iop32x/include/mach/uncompress.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-iop32x/include/mach/uncompress.h
- */
-
-#include <asm/types.h>
-#include <asm/mach-types.h>
-#include <linux/serial_reg.h>
-
-#define uart_base ((volatile u8 *)0xfe800000)
-
-#define TX_DONE		(UART_LSR_TEMT | UART_LSR_THRE)
-
-static inline void putc(char c)
-{
-	while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
-		barrier();
-	uart_base[UART_TX] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-#define arch_decomp_setup() do { } while (0)
diff --git a/arch/arm/mach-iop32x/iop3xx.h b/arch/arm/mach-iop32x/iop3xx.h
index 46b4b34a4ad2..a6ec7ebadb35 100644
--- a/arch/arm/mach-iop32x/iop3xx.h
+++ b/arch/arm/mach-iop32x/iop3xx.h
@@ -225,6 +225,7 @@ extern int iop3xx_get_init_atu(void);
 #include <linux/reboot.h>
 
 void iop3xx_map_io(void);
+void iop_enable_cp6(void);
 void iop_init_cp6_handler(void);
 void iop_init_time(unsigned long tickrate);
 void iop3xx_restart(enum reboot_mode, const char *);
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
index 49caaa703881..8b4c29d17265 100644
--- a/arch/arm/mach-iop32x/iq31244.c
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -324,6 +324,7 @@ MACHINE_END
 MACHINE_START(EP80219, "Intel EP80219")
 	/* Maintainer: Intel Corp. */
 	.atag_offset	= 0x100,
+	.nr_irqs	= IOP32X_NR_IRQS,
 	.map_io		= iq31244_map_io,
 	.init_irq	= iop32x_init_irq,
 	.init_time	= iq31244_timer_init,
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
index b455d7073296..d9780c4660cb 100644
--- a/arch/arm/mach-iop32x/iq80321.c
+++ b/arch/arm/mach-iop32x/iq80321.c
@@ -183,6 +183,7 @@ static void __init iq80321_init_machine(void)
 MACHINE_START(IQ80321, "Intel IQ80321")
 	/* Maintainer: Intel Corp. */
 	.atag_offset	= 0x100,
+	.nr_irqs	= IOP32X_NR_IRQS,
 	.map_io		= iq80321_map_io,
 	.init_irq	= iop32x_init_irq,
 	.init_time	= iq80321_timer_init,
diff --git a/arch/arm/mach-iop32x/irq.c b/arch/arm/mach-iop32x/irq.c
index 2d48bf1398c1..6dca7e97d81f 100644
--- a/arch/arm/mach-iop32x/irq.c
+++ b/arch/arm/mach-iop32x/irq.c
@@ -29,17 +29,26 @@ static void intstr_write(u32 val)
 	asm volatile("mcr p6, 0, %0, c4, c0, 0" : : "r" (val));
 }
 
+static u32 iintsrc_read(void)
+{
+	int irq;
+
+	asm volatile("mrc p6, 0, %0, c8, c0, 0" : "=r" (irq));
+
+	return irq;
+}
+
 static void
 iop32x_irq_mask(struct irq_data *d)
 {
-	iop32x_mask &= ~(1 << d->irq);
+	iop32x_mask &= ~(1 << (d->irq - 1));
 	intctl_write(iop32x_mask);
 }
 
 static void
 iop32x_irq_unmask(struct irq_data *d)
 {
-	iop32x_mask |= 1 << d->irq;
+	iop32x_mask |= 1 << (d->irq - 1);
 	intctl_write(iop32x_mask);
 }
 
@@ -50,11 +59,25 @@ struct irq_chip ext_chip = {
 	.irq_unmask	= iop32x_irq_unmask,
 };
 
+static void iop_handle_irq(struct pt_regs *regs)
+{
+	u32 mask;
+
+	iop_enable_cp6();
+
+	do {
+		mask = iintsrc_read();
+		if (mask)
+			generic_handle_irq(fls(mask));
+	} while (mask);
+}
+
 void __init iop32x_init_irq(void)
 {
 	int i;
 
 	iop_init_cp6_handler();
+	set_handle_irq(iop_handle_irq);
 
 	intctl_write(0);
 	intstr_write(0);
@@ -65,7 +88,7 @@ void __init iop32x_init_irq(void)
 	    machine_is_em7210())
 		*IOP3XX_PCIIRSR = 0x0f;
 
-	for (i = 0; i < NR_IRQS; i++) {
+	for (i = 1; i < NR_IRQS; i++) {
 		irq_set_chip_and_handler(i, &ext_chip, handle_level_irq);
 		irq_clear_status_flags(i, IRQ_NOREQUEST | IRQ_NOPROBE);
 	}
diff --git a/arch/arm/mach-iop32x/irqs.h b/arch/arm/mach-iop32x/irqs.h
index 69858e4e905d..e9fc88e09189 100644
--- a/arch/arm/mach-iop32x/irqs.h
+++ b/arch/arm/mach-iop32x/irqs.h
@@ -7,36 +7,42 @@
 #ifndef __IOP32X_IRQS_H
 #define __IOP32X_IRQS_H
 
+/* Interrupts in Linux start at 1, hardware starts at 0 */
+
+#define IOP_IRQ(x) ((x) + 1)
+
 /*
  * IOP80321 chipset interrupts
  */
-#define IRQ_IOP32X_DMA0_EOT	0
-#define IRQ_IOP32X_DMA0_EOC	1
-#define IRQ_IOP32X_DMA1_EOT	2
-#define IRQ_IOP32X_DMA1_EOC	3
-#define IRQ_IOP32X_AA_EOT	6
-#define IRQ_IOP32X_AA_EOC	7
-#define IRQ_IOP32X_CORE_PMON	8
-#define IRQ_IOP32X_TIMER0	9
-#define IRQ_IOP32X_TIMER1	10
-#define IRQ_IOP32X_I2C_0	11
-#define IRQ_IOP32X_I2C_1	12
-#define IRQ_IOP32X_MESSAGING	13
-#define IRQ_IOP32X_ATU_BIST	14
-#define IRQ_IOP32X_PERFMON	15
-#define IRQ_IOP32X_CORE_PMU	16
-#define IRQ_IOP32X_BIU_ERR	17
-#define IRQ_IOP32X_ATU_ERR	18
-#define IRQ_IOP32X_MCU_ERR	19
-#define IRQ_IOP32X_DMA0_ERR	20
-#define IRQ_IOP32X_DMA1_ERR	21
-#define IRQ_IOP32X_AA_ERR	23
-#define IRQ_IOP32X_MSG_ERR	24
-#define IRQ_IOP32X_SSP		25
-#define IRQ_IOP32X_XINT0	27
-#define IRQ_IOP32X_XINT1	28
-#define IRQ_IOP32X_XINT2	29
-#define IRQ_IOP32X_XINT3	30
-#define IRQ_IOP32X_HPI		31
+#define IRQ_IOP32X_DMA0_EOT	IOP_IRQ(0)
+#define IRQ_IOP32X_DMA0_EOC	IOP_IRQ(1)
+#define IRQ_IOP32X_DMA1_EOT	IOP_IRQ(2)
+#define IRQ_IOP32X_DMA1_EOC	IOP_IRQ(3)
+#define IRQ_IOP32X_AA_EOT	IOP_IRQ(6)
+#define IRQ_IOP32X_AA_EOC	IOP_IRQ(7)
+#define IRQ_IOP32X_CORE_PMON	IOP_IRQ(8)
+#define IRQ_IOP32X_TIMER0	IOP_IRQ(9)
+#define IRQ_IOP32X_TIMER1	IOP_IRQ(10)
+#define IRQ_IOP32X_I2C_0	IOP_IRQ(11)
+#define IRQ_IOP32X_I2C_1	IOP_IRQ(12)
+#define IRQ_IOP32X_MESSAGING	IOP_IRQ(13)
+#define IRQ_IOP32X_ATU_BIST	IOP_IRQ(14)
+#define IRQ_IOP32X_PERFMON	IOP_IRQ(15)
+#define IRQ_IOP32X_CORE_PMU	IOP_IRQ(16)
+#define IRQ_IOP32X_BIU_ERR	IOP_IRQ(17)
+#define IRQ_IOP32X_ATU_ERR	IOP_IRQ(18)
+#define IRQ_IOP32X_MCU_ERR	IOP_IRQ(19)
+#define IRQ_IOP32X_DMA0_ERR	IOP_IRQ(20)
+#define IRQ_IOP32X_DMA1_ERR	IOP_IRQ(21)
+#define IRQ_IOP32X_AA_ERR	IOP_IRQ(23)
+#define IRQ_IOP32X_MSG_ERR	IOP_IRQ(24)
+#define IRQ_IOP32X_SSP		IOP_IRQ(25)
+#define IRQ_IOP32X_XINT0	IOP_IRQ(27)
+#define IRQ_IOP32X_XINT1	IOP_IRQ(28)
+#define IRQ_IOP32X_XINT2	IOP_IRQ(29)
+#define IRQ_IOP32X_XINT3	IOP_IRQ(30)
+#define IRQ_IOP32X_HPI		IOP_IRQ(31)
+
+#define IOP32X_NR_IRQS		(IRQ_IOP32X_HPI + 1)
 
 #endif
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index bf99e718f8b8..bb1e2e11bf35 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -358,6 +358,7 @@ static void __init n2100_init_machine(void)
 MACHINE_START(N2100, "Thecus N2100")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= IOP32X_NR_IRQS,
 	.map_io		= n2100_map_io,
 	.init_irq	= iop32x_init_irq,
 	.init_time	= n2100_timer_init,
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 4c787b4be62b..cb46802f5ce5 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -1,79 +1,19 @@
 # SPDX-License-Identifier: GPL-2.0-only
-if ARCH_IXP4XX
-
-menu "Intel IXP4xx Implementation Options"
-
-comment "IXP4xx Platforms"
-
-config MACH_IXP4XX_OF
-	bool
-	prompt "Device Tree IXP4xx boards"
-	default y
+menuconfig ARCH_IXP4XX
+	bool "IXP4xx-based platforms"
+	depends on ARCH_MULTI_V5
+	depends on CPU_BIG_ENDIAN
 	select ARM_APPENDED_DTB # Old Redboot bootloaders deployed
+	select CPU_XSCALE
+	select GPIO_IXP4XX
+	select GPIOLIB
+	select FORCE_PCI
 	select I2C
 	select I2C_IOP3XX
-	select PCI
+	select IXP4XX_IRQ
+	select IXP4XX_TIMER
+	select USB_EHCI_BIG_ENDIAN_DESC
+	select USB_EHCI_BIG_ENDIAN_MMIO
 	select USE_OF
 	help
-	  Say 'Y' here to support Device Tree-based IXP4xx platforms.
-
-config MACH_GATEWAY7001
-	bool "Gateway 7001"
-	depends on IXP4XX_PCI_LEGACY
-	help
-	  Say 'Y' here if you want your kernel to support Gateway's
-	  7001 Access Point. For more information on this platform,
-	  see http://openwrt.org
-
-config MACH_GORAMO_MLR
-	bool "GORAMO Multi Link Router"
-	depends on IXP4XX_PCI_LEGACY
-	help
-	  Say 'Y' here if you want your kernel to support GORAMO
-	  MultiLink router.
-
-config ARCH_PRPMC1100
-	bool "PrPMC1100"
-	help
-	  Say 'Y' here if you want your kernel to support the Motorola
-	  PrPCM1100 Processor Mezanine Module. For more information on
-	  this platform, see <file:Documentation/arm/ixp4xx.rst>.
-
-comment "IXP4xx Options"
-
-config IXP4XX_PCI_LEGACY
-	bool "IXP4xx legacy PCI driver support"
-	depends on PCI
-	help
-	  Selects legacy PCI driver.
-	  Not recommended for new development.
-
-config IXP4XX_INDIRECT_PCI
-	bool "Use indirect PCI memory access"
-	depends on IXP4XX_PCI_LEGACY
-	help
-          IXP4xx provides two methods of accessing PCI memory space:
-
-          1) A direct mapped window from 0x48000000 to 0x4BFFFFFF (64MB).
-             To access PCI via this space, we simply ioremap() the BAR
-             into the kernel and we can use the standard read[bwl]/write[bwl]
-             macros. This is the preferred method due to speed but it
-             limits the system to just 64MB of PCI memory. This can be
-             problematic if using video cards and other memory-heavy devices.
-
-	  2) If > 64MB of memory space is required, the IXP4xx can be
-	     configured to use indirect registers to access the whole PCI
-	     memory space. This currently allows for up to 1 GB (0x10000000
-	     to 0x4FFFFFFF) of memory on the bus. The disadvantage of this
-	     is that every PCI access requires three local register accesses
-	     plus a spinlock, but in some cases the performance hit is
-	     acceptable. In addition, you cannot mmap() PCI devices in this
-	     case due to the indirect nature of the PCI window.
-
-	  By default, the direct method is used. Choose this option if you
-	  need to use the indirect method instead. If you don't know
-	  what you need, leave this option unselected.
-
-endmenu
-
-endif
+	  Support for Intel's IXP4XX (XScale) family of processors.
diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index b241094c9649..3d1c9d854c7f 100644
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -1,19 +1,2 @@
 # SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the linux kernel.
-#
-
-obj-pci-y	:=
-obj-pci-n	:=
-
-# Device tree platform
-obj-pci-$(CONFIG_MACH_IXP4XX_OF)	+= ixp4xx-of.o
-
-obj-pci-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-pci.o
-
-obj-y	+= common.o
-
-obj-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-setup.o
-obj-$(CONFIG_MACH_GORAMO_MLR)	+= goramo_mlr.o
-
-obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
+obj-y	+= ixp4xx-of.o
diff --git a/arch/arm/mach-ixp4xx/Makefile.boot b/arch/arm/mach-ixp4xx/Makefile.boot
deleted file mode 100644
index 9b015bd1ef27..000000000000
--- a/arch/arm/mach-ixp4xx/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
deleted file mode 100644
index 893c19c254e3..000000000000
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ /dev/null
@@ -1,451 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-ixp4xx/common-pci.c 
- *
- * IXP4XX PCI routines for all platforms
- *
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003 Greg Ungerer <gerg@snapgear.com>
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/io.h>
-#include <linux/export.h>
-#include <asm/dma-mapping.h>
-
-#include <asm/cputype.h>
-#include <asm/irq.h>
-#include <linux/sizes.h>
-#include <asm/mach/pci.h>
-#include <mach/hardware.h>
-
-
-/*
- * IXP4xx PCI read function is dependent on whether we are 
- * running A0 or B0 (AppleGate) silicon.
- */
-int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data);
-
-/*
- * Base address for PCI register region
- */
-unsigned long ixp4xx_pci_reg_base = 0;
-
-/*
- * PCI cfg an I/O routines are done by programming a 
- * command/byte enable register, and then read/writing
- * the data from a data register. We need to ensure
- * these transactions are atomic or we will end up
- * with corrupt data on the bus or in a driver.
- */
-static DEFINE_RAW_SPINLOCK(ixp4xx_pci_lock);
-
-/*
- * Read from PCI config space
- */
-static void crp_read(u32 ad_cbe, u32 *data)
-{
-	unsigned long flags;
-	raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags);
-	*PCI_CRP_AD_CBE = ad_cbe;
-	*data = *PCI_CRP_RDATA;
-	raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags);
-}
-
-/*
- * Write to PCI config space
- */
-static void crp_write(u32 ad_cbe, u32 data)
-{ 
-	unsigned long flags;
-	raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags);
-	*PCI_CRP_AD_CBE = CRP_AD_CBE_WRITE | ad_cbe;
-	*PCI_CRP_WDATA = data;
-	raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags);
-}
-
-static inline int check_master_abort(void)
-{
-	/* check Master Abort bit after access */
-	unsigned long isr = *PCI_ISR;
-
-	if (isr & PCI_ISR_PFE) {
-		/* make sure the Master Abort bit is reset */    
-		*PCI_ISR = PCI_ISR_PFE;
-		pr_debug("%s failed\n", __func__);
-		return 1;
-	}
-
-	return 0;
-}
-
-int ixp4xx_pci_read_errata(u32 addr, u32 cmd, u32* data)
-{
-	unsigned long flags;
-	int retval = 0;
-	int i;
-
-	raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags);
-
-	*PCI_NP_AD = addr;
-
-	/* 
-	 * PCI workaround  - only works if NP PCI space reads have 
-	 * no side effects!!! Read 8 times. last one will be good.
-	 */
-	for (i = 0; i < 8; i++) {
-		*PCI_NP_CBE = cmd;
-		*data = *PCI_NP_RDATA;
-		*data = *PCI_NP_RDATA;
-	}
-
-	if(check_master_abort())
-		retval = 1;
-
-	raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags);
-	return retval;
-}
-
-int ixp4xx_pci_read_no_errata(u32 addr, u32 cmd, u32* data)
-{
-	unsigned long flags;
-	int retval = 0;
-
-	raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags);
-
-	*PCI_NP_AD = addr;
-
-	/* set up and execute the read */    
-	*PCI_NP_CBE = cmd;
-
-	/* the result of the read is now in NP_RDATA */
-	*data = *PCI_NP_RDATA; 
-
-	if(check_master_abort())
-		retval = 1;
-
-	raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags);
-	return retval;
-}
-
-int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data)
-{    
-	unsigned long flags;
-	int retval = 0;
-
-	raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags);
-
-	*PCI_NP_AD = addr;
-
-	/* set up the write */
-	*PCI_NP_CBE = cmd;
-
-	/* execute the write by writing to NP_WDATA */
-	*PCI_NP_WDATA = data;
-
-	if(check_master_abort())
-		retval = 1;
-
-	raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags);
-	return retval;
-}
-
-static u32 ixp4xx_config_addr(u8 bus_num, u16 devfn, int where)
-{
-	u32 addr;
-	if (!bus_num) {
-		/* type 0 */
-		addr = BIT(32-PCI_SLOT(devfn)) | ((PCI_FUNC(devfn)) << 8) | 
-		    (where & ~3);	
-	} else {
-		/* type 1 */
-		addr = (bus_num << 16) | ((PCI_SLOT(devfn)) << 11) | 
-			((PCI_FUNC(devfn)) << 8) | (where & ~3) | 1;
-	}
-	return addr;
-}
-
-/*
- * Mask table, bits to mask for quantity of size 1, 2 or 4 bytes.
- * 0 and 3 are not valid indexes...
- */
-static u32 bytemask[] = {
-	/*0*/	0,
-	/*1*/	0xff,
-	/*2*/	0xffff,
-	/*3*/	0,
-	/*4*/	0xffffffff,
-};
-
-static u32 local_byte_lane_enable_bits(u32 n, int size)
-{
-	if (size == 1)
-		return (0xf & ~BIT(n)) << CRP_AD_CBE_BESL;
-	if (size == 2)
-		return (0xf & ~(BIT(n) | BIT(n+1))) << CRP_AD_CBE_BESL;
-	if (size == 4)
-		return 0;
-	return 0xffffffff;
-}
-
-static int local_read_config(int where, int size, u32 *value)
-{ 
-	u32 n, data;
-	pr_debug("local_read_config from %d size %d\n", where, size);
-	n = where % 4;
-	crp_read(where & ~3, &data);
-	*value = (data >> (8*n)) & bytemask[size];
-	pr_debug("local_read_config read %#x\n", *value);
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int local_write_config(int where, int size, u32 value)
-{
-	u32 n, byte_enables, data;
-	pr_debug("local_write_config %#x to %d size %d\n", value, where, size);
-	n = where % 4;
-	byte_enables = local_byte_lane_enable_bits(n, size);
-	if (byte_enables == 0xffffffff)
-		return PCIBIOS_BAD_REGISTER_NUMBER;
-	data = value << (8*n);
-	crp_write((where & ~3) | byte_enables, data);
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static u32 byte_lane_enable_bits(u32 n, int size)
-{
-	if (size == 1)
-		return (0xf & ~BIT(n)) << 4;
-	if (size == 2)
-		return (0xf & ~(BIT(n) | BIT(n+1))) << 4;
-	if (size == 4)
-		return 0;
-	return 0xffffffff;
-}
-
-static int ixp4xx_pci_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value)
-{
-	u32 n, byte_enables, addr, data;
-	u8 bus_num = bus->number;
-
-	pr_debug("read_config from %d size %d dev %d:%d:%d\n", where, size,
-		bus_num, PCI_SLOT(devfn), PCI_FUNC(devfn));
-
-	*value = 0xffffffff;
-	n = where % 4;
-	byte_enables = byte_lane_enable_bits(n, size);
-	if (byte_enables == 0xffffffff)
-		return PCIBIOS_BAD_REGISTER_NUMBER;
-
-	addr = ixp4xx_config_addr(bus_num, devfn, where);
-	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_CONFIGREAD, &data))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	*value = (data >> (8*n)) & bytemask[size];
-	pr_debug("read_config_byte read %#x\n", *value);
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int ixp4xx_pci_write_config(struct pci_bus *bus,  unsigned int devfn, int where, int size, u32 value)
-{
-	u32 n, byte_enables, addr, data;
-	u8 bus_num = bus->number;
-
-	pr_debug("write_config_byte %#x to %d size %d dev %d:%d:%d\n", value, where,
-		size, bus_num, PCI_SLOT(devfn), PCI_FUNC(devfn));
-
-	n = where % 4;
-	byte_enables = byte_lane_enable_bits(n, size);
-	if (byte_enables == 0xffffffff)
-		return PCIBIOS_BAD_REGISTER_NUMBER;
-
-	addr = ixp4xx_config_addr(bus_num, devfn, where);
-	data = value << (8*n);
-	if (ixp4xx_pci_write(addr, byte_enables | NP_CMD_CONFIGWRITE, data))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops ixp4xx_ops = {
-	.read =  ixp4xx_pci_read_config,
-	.write = ixp4xx_pci_write_config,
-};
-
-/*
- * PCI abort handler
- */
-static int abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
-	u32 isr, status;
-
-	isr = *PCI_ISR;
-	local_read_config(PCI_STATUS, 2, &status);
-	pr_debug("PCI: abort_handler addr = %#lx, isr = %#x, "
-		"status = %#x\n", addr, isr, status);
-
-	/* make sure the Master Abort bit is reset */    
-	*PCI_ISR = PCI_ISR_PFE;
-	status |= PCI_STATUS_REC_MASTER_ABORT;
-	local_write_config(PCI_STATUS, 2, status);
-
-	/*
-	 * If it was an imprecise abort, then we need to correct the
-	 * return address to be _after_ the instruction.
-	 */
-	if (fsr & (1 << 10))
-		regs->ARM_pc += 4;
-
-	return 0;
-}
-
-void __init ixp4xx_pci_preinit(void)
-{
-	unsigned long cpuid = read_cpuid_id();
-
-#ifdef CONFIG_IXP4XX_INDIRECT_PCI
-	pcibios_min_mem = 0x10000000; /* 1 GB of indirect PCI MMIO space */
-#else
-	pcibios_min_mem = 0x48000000; /* 64 MB of PCI MMIO space */
-#endif
-	/*
-	 * Determine which PCI read method to use.
-	 * Rev 0 IXP425 requires workaround.
-	 */
-	if (!(cpuid & 0xf) && cpu_is_ixp42x()) {
-		printk("PCI: IXP42x A0 silicon detected - "
-			"PCI Non-Prefetch Workaround Enabled\n");
-		ixp4xx_pci_read = ixp4xx_pci_read_errata;
-	} else
-		ixp4xx_pci_read = ixp4xx_pci_read_no_errata;
-
-
-	/* hook in our fault handler for PCI errors */
-	hook_fault_code(16+6, abort_handler, SIGBUS, 0,
-			"imprecise external abort");
-
-	pr_debug("setup PCI-AHB(inbound) and AHB-PCI(outbound) address mappings\n");
-
-	/*
-	 * We use identity AHB->PCI address translation
-	 * in the 0x48000000 to 0x4bffffff address space
-	 */
-	*PCI_PCIMEMBASE = 0x48494A4B;
-
-	/*
-	 * We also use identity PCI->AHB address translation
-	 * in 4 16MB BARs that begin at the physical memory start
-	 */
-	*PCI_AHBMEMBASE = (PHYS_OFFSET & 0xFF000000) +
-		((PHYS_OFFSET & 0xFF000000) >> 8) +
-		((PHYS_OFFSET & 0xFF000000) >> 16) +
-		((PHYS_OFFSET & 0xFF000000) >> 24) +
-		0x00010203;
-
-	if (*PCI_CSR & PCI_CSR_HOST) {
-		printk("PCI: IXP4xx is host\n");
-
-		pr_debug("setup BARs in controller\n");
-
-		/*
-		 * We configure the PCI inbound memory windows to be
-		 * 1:1 mapped to SDRAM
-		 */
-		local_write_config(PCI_BASE_ADDRESS_0, 4, PHYS_OFFSET);
-		local_write_config(PCI_BASE_ADDRESS_1, 4, PHYS_OFFSET + SZ_16M);
-		local_write_config(PCI_BASE_ADDRESS_2, 4, PHYS_OFFSET + SZ_32M);
-		local_write_config(PCI_BASE_ADDRESS_3, 4,
-					PHYS_OFFSET + SZ_32M + SZ_16M);
-
-		/*
-		 * Enable CSR window at 64 MiB to allow PCI masters
-		 * to continue prefetching past 64 MiB boundary.
-		 */
-		local_write_config(PCI_BASE_ADDRESS_4, 4, PHYS_OFFSET + SZ_64M);
-
-		/*
-		 * Enable the IO window to be way up high, at 0xfffffc00
-		 */
-		local_write_config(PCI_BASE_ADDRESS_5, 4, 0xfffffc01);
-		local_write_config(0x40, 4, 0x000080FF); /* No TRDY time limit */
-	} else {
-		printk("PCI: IXP4xx is target - No bus scan performed\n");
-	}
-
-	printk("PCI: IXP4xx Using %s access for memory space\n",
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-			"direct"
-#else
-			"indirect"
-#endif
-		);
-
-	pr_debug("clear error bits in ISR\n");
-	*PCI_ISR = PCI_ISR_PSE | PCI_ISR_PFE | PCI_ISR_PPE | PCI_ISR_AHBE;
-
-	/*
-	 * Set Initialize Complete in PCI Control Register: allow IXP4XX to
-	 * respond to PCI configuration cycles. Specify that the AHB bus is
-	 * operating in big endian mode. Set up byte lane swapping between 
-	 * little-endian PCI and the big-endian AHB bus 
-	 */
-#ifdef __ARMEB__
-	*PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE | PCI_CSR_PDS | PCI_CSR_ADS;
-#else
-	*PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE;
-#endif
-
-	pr_debug("DONE\n");
-}
-
-int ixp4xx_setup(int nr, struct pci_sys_data *sys)
-{
-	struct resource *res;
-
-	if (nr >= 1)
-		return 0;
-
-	res = kcalloc(2, sizeof(*res), GFP_KERNEL);
-	if (res == NULL) {
-		/* 
-		 * If we're out of memory this early, something is wrong,
-		 * so we might as well catch it here.
-		 */
-		panic("PCI: unable to allocate resources?\n");
-	}
-
-	local_write_config(PCI_COMMAND, 2, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
-
-	res[0].name = "PCI I/O Space";
-	res[0].start = 0x00000000;
-	res[0].end = 0x0000ffff;
-	res[0].flags = IORESOURCE_IO;
-
-	res[1].name = "PCI Memory Space";
-	res[1].start = PCIBIOS_MIN_MEM;
-	res[1].end = PCIBIOS_MAX_MEM;
-	res[1].flags = IORESOURCE_MEM;
-
-	request_resource(&ioport_resource, &res[0]);
-	request_resource(&iomem_resource, &res[1]);
-
-	pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset);
-	pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset);
-
-	return 1;
-}
-
-EXPORT_SYMBOL(ixp4xx_pci_read);
-EXPORT_SYMBOL(ixp4xx_pci_write);
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
deleted file mode 100644
index cdc720f54daa..000000000000
--- a/arch/arm/mach-ixp4xx/common.c
+++ /dev/null
@@ -1,448 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/common.c
- *
- * Generic code shared across all IXP4XX platforms
- *
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2002 (c) Intel Corporation
- * Copyright 2003-2004 (c) MontaVista, Software, Inc. 
- * 
- * This file is licensed under  the terms of the GNU General Public 
- * License version 2. This program is licensed "as is" without any 
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/interrupt.h>
-#include <linux/bitops.h>
-#include <linux/io.h>
-#include <linux/export.h>
-#include <linux/cpu.h>
-#include <linux/pci.h>
-#include <linux/sched_clock.h>
-#include <linux/soc/ixp4xx/cpu.h>
-#include <linux/irqchip/irq-ixp4xx.h>
-#include <linux/platform_data/timer-ixp4xx.h>
-#include <linux/dma-map-ops.h>
-#include <mach/udc.h>
-#include <mach/hardware.h>
-#include <linux/uaccess.h>
-#include <asm/page.h>
-#include <asm/exception.h>
-#include <asm/irq.h>
-#include <asm/system_misc.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-
-#include "irqs.h"
-
-u32 ixp4xx_read_feature_bits(void)
-{
-	u32 val = ~__raw_readl(IXP4XX_EXP_CFG2);
-
-	if (cpu_is_ixp42x_rev_a0())
-		return IXP42X_FEATURE_MASK & ~(IXP4XX_FEATURE_RCOMP |
-					       IXP4XX_FEATURE_AES);
-	if (cpu_is_ixp42x())
-		return val & IXP42X_FEATURE_MASK;
-	if (cpu_is_ixp43x())
-		return val & IXP43X_FEATURE_MASK;
-	return val & IXP46X_FEATURE_MASK;
-}
-EXPORT_SYMBOL(ixp4xx_read_feature_bits);
-
-void ixp4xx_write_feature_bits(u32 value)
-{
-	__raw_writel(~value, IXP4XX_EXP_CFG2);
-}
-EXPORT_SYMBOL(ixp4xx_write_feature_bits);
-
-#define IXP4XX_TIMER_FREQ 66666000
-
-/*************************************************************************
- * IXP4xx chipset I/O mapping
- *************************************************************************/
-static struct map_desc ixp4xx_io_desc[] __initdata = {
-	{	/* UART, Interrupt ctrl, GPIO, timers, NPEs, MACs, USB .... */
-		.virtual	= (unsigned long)IXP4XX_PERIPHERAL_BASE_VIRT,
-		.pfn		= __phys_to_pfn(IXP4XX_PERIPHERAL_BASE_PHYS),
-		.length		= IXP4XX_PERIPHERAL_REGION_SIZE,
-		.type		= MT_DEVICE
-	}, {	/* Expansion Bus Config Registers */
-		.virtual	= (unsigned long)IXP4XX_EXP_CFG_BASE_VIRT,
-		.pfn		= __phys_to_pfn(IXP4XX_EXP_CFG_BASE_PHYS),
-		.length		= IXP4XX_EXP_CFG_REGION_SIZE,
-		.type		= MT_DEVICE
-	}, {	/* PCI Registers */
-		.virtual	= (unsigned long)IXP4XX_PCI_CFG_BASE_VIRT,
-		.pfn		= __phys_to_pfn(IXP4XX_PCI_CFG_BASE_PHYS),
-		.length		= IXP4XX_PCI_CFG_REGION_SIZE,
-		.type		= MT_DEVICE
-	},
-};
-
-void __init ixp4xx_map_io(void)
-{
-  	iotable_init(ixp4xx_io_desc, ARRAY_SIZE(ixp4xx_io_desc));
-}
-
-void __init ixp4xx_init_irq(void)
-{
-	/*
-	 * ixp4xx does not implement the XScale PWRMODE register
-	 * so it must not call cpu_do_idle().
-	 */
-	cpu_idle_poll_ctrl(true);
-
-	ixp4xx_irq_init(IXP4XX_INTC_BASE_PHYS,
-			(cpu_is_ixp46x() || cpu_is_ixp43x()));
-}
-
-void __init ixp4xx_timer_init(void)
-{
-	return ixp4xx_timer_setup(IXP4XX_TIMER_BASE_PHYS,
-				  IRQ_IXP4XX_TIMER1,
-				  IXP4XX_TIMER_FREQ);
-}
-
-static struct pxa2xx_udc_mach_info ixp4xx_udc_info;
-
-void __init ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info)
-{
-	memcpy(&ixp4xx_udc_info, info, sizeof *info);
-}
-
-static struct resource ixp4xx_udc_resources[] = {
-	[0] = {
-		.start  = 0xc800b000,
-		.end    = 0xc800bfff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = IRQ_IXP4XX_USB,
-		.end    = IRQ_IXP4XX_USB,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource ixp4xx_gpio_resource[] = {
-	{
-		.start = IXP4XX_GPIO_BASE_PHYS,
-		.end = IXP4XX_GPIO_BASE_PHYS + 0xfff,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device ixp4xx_gpio_device = {
-	.name           = "ixp4xx-gpio",
-	.id             = -1,
-	.dev = {
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-	},
-	.resource = ixp4xx_gpio_resource,
-	.num_resources  = ARRAY_SIZE(ixp4xx_gpio_resource),
-};
-
-/*
- * USB device controller. The IXP4xx uses the same controller as PXA25X,
- * so we just use the same device.
- */
-static struct platform_device ixp4xx_udc_device = {
-	.name           = "pxa25x-udc",
-	.id             = -1,
-	.num_resources  = 2,
-	.resource       = ixp4xx_udc_resources,
-	.dev            = {
-		.platform_data = &ixp4xx_udc_info,
-	},
-};
-
-static struct resource ixp4xx_npe_resources[] = {
-	{
-		.start = IXP4XX_NPEA_BASE_PHYS,
-		.end = IXP4XX_NPEA_BASE_PHYS + 0xfff,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IXP4XX_NPEB_BASE_PHYS,
-		.end = IXP4XX_NPEB_BASE_PHYS + 0xfff,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IXP4XX_NPEC_BASE_PHYS,
-		.end = IXP4XX_NPEC_BASE_PHYS + 0xfff,
-		.flags = IORESOURCE_MEM,
-	},
-
-};
-
-static struct platform_device ixp4xx_npe_device = {
-	.name           = "ixp4xx-npe",
-	.id             = -1,
-	.num_resources  = ARRAY_SIZE(ixp4xx_npe_resources),
-	.resource       = ixp4xx_npe_resources,
-};
-
-static struct resource ixp4xx_qmgr_resources[] = {
-	{
-		.start = IXP4XX_QMGR_BASE_PHYS,
-		.end = IXP4XX_QMGR_BASE_PHYS + 0x3fff,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_IXP4XX_QM1,
-		.end = IRQ_IXP4XX_QM1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_IXP4XX_QM2,
-		.end = IRQ_IXP4XX_QM2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device ixp4xx_qmgr_device = {
-	.name           = "ixp4xx-qmgr",
-	.id             = -1,
-	.num_resources  = ARRAY_SIZE(ixp4xx_qmgr_resources),
-	.resource       = ixp4xx_qmgr_resources,
-};
-
-static struct platform_device *ixp4xx_devices[] __initdata = {
-	&ixp4xx_npe_device,
-	&ixp4xx_qmgr_device,
-	&ixp4xx_gpio_device,
-	&ixp4xx_udc_device,
-};
-
-static struct resource ixp46x_i2c_resources[] = {
-	[0] = {
-		.start 	= 0xc8011000,
-		.end	= 0xc801101c,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start 	= IRQ_IXP4XX_I2C,
-		.end	= IRQ_IXP4XX_I2C,
-		.flags	= IORESOURCE_IRQ
-	}
-};
-
-/* A single 32-bit register on IXP46x */
-#define IXP4XX_HWRANDOM_BASE_PHYS	0x70002100
-
-static struct resource ixp46x_hwrandom_resource[] = {
-	{
-		.start = IXP4XX_HWRANDOM_BASE_PHYS,
-		.end = IXP4XX_HWRANDOM_BASE_PHYS + 0x3,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device ixp46x_hwrandom_device = {
-	.name           = "ixp4xx-hwrandom",
-	.id             = -1,
-	.dev = {
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-	},
-	.resource = ixp46x_hwrandom_resource,
-	.num_resources  = ARRAY_SIZE(ixp46x_hwrandom_resource),
-};
-
-/*
- * I2C controller. The IXP46x uses the same block as the IOP3xx, so
- * we just use the same device name.
- */
-static struct platform_device ixp46x_i2c_controller = {
-	.name		= "IOP3xx-I2C",
-	.id		= 0,
-	.num_resources	= 2,
-	.resource	= ixp46x_i2c_resources
-};
-
-static struct resource ixp46x_ptp_resources[] = {
-	DEFINE_RES_MEM(IXP4XX_TIMESYNC_BASE_PHYS, SZ_4K),
-	DEFINE_RES_IRQ_NAMED(IRQ_IXP4XX_GPIO8, "master"),
-	DEFINE_RES_IRQ_NAMED(IRQ_IXP4XX_GPIO7, "slave"),
-};
-
-static struct platform_device ixp46x_ptp = {
-	.name		= "ptp-ixp46x",
-	.id		= -1,
-	.resource	= ixp46x_ptp_resources,
-	.num_resources	= ARRAY_SIZE(ixp46x_ptp_resources),
-};
-
-static struct platform_device *ixp46x_devices[] __initdata = {
-	&ixp46x_hwrandom_device,
-	&ixp46x_i2c_controller,
-	&ixp46x_ptp,
-};
-
-unsigned long ixp4xx_exp_bus_size;
-EXPORT_SYMBOL(ixp4xx_exp_bus_size);
-
-static struct platform_device_info ixp_dev_info __initdata = {
-	.name		= "ixp4xx_crypto",
-	.id		= 0,
-	.dma_mask	= DMA_BIT_MASK(32),
-};
-
-static int __init ixp_crypto_register(void)
-{
-	struct platform_device *pdev;
-
-	if (!(~(*IXP4XX_EXP_CFG2) & (IXP4XX_FEATURE_HASH |
-				IXP4XX_FEATURE_AES | IXP4XX_FEATURE_DES))) {
-		printk(KERN_ERR "ixp_crypto: No HW crypto available\n");
-		return -ENODEV;
-	}
-
-	pdev = platform_device_register_full(&ixp_dev_info);
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	return 0;
-}
-
-void __init ixp4xx_sys_init(void)
-{
-	ixp4xx_exp_bus_size = SZ_16M;
-
-	platform_add_devices(ixp4xx_devices, ARRAY_SIZE(ixp4xx_devices));
-
-	if (IS_ENABLED(CONFIG_CRYPTO_DEV_IXP4XX))
-		ixp_crypto_register();
-
-	if (cpu_is_ixp46x()) {
-		int region;
-
-		platform_add_devices(ixp46x_devices,
-				ARRAY_SIZE(ixp46x_devices));
-
-		for (region = 0; region < 7; region++) {
-			if((*(IXP4XX_EXP_REG(0x4 * region)) & 0x200)) {
-				ixp4xx_exp_bus_size = SZ_32M;
-				break;
-			}
-		}
-	}
-
-	printk("IXP4xx: Using %luMiB expansion bus window size\n",
-			ixp4xx_exp_bus_size >> 20);
-}
-
-unsigned long ixp4xx_timer_freq = IXP4XX_TIMER_FREQ;
-EXPORT_SYMBOL(ixp4xx_timer_freq);
-
-void ixp4xx_restart(enum reboot_mode mode, const char *cmd)
-{
-	if (mode == REBOOT_SOFT) {
-		/* Jump into ROM at address 0 */
-		soft_restart(0);
-	} else {
-		/* Use on-chip reset capability */
-
-		/* set the "key" register to enable access to
-		 * "timer" and "enable" registers
-		 */
-		*IXP4XX_OSWK = IXP4XX_WDT_KEY;
-
-		/* write 0 to the timer register for an immediate reset */
-		*IXP4XX_OSWT = 0;
-
-		*IXP4XX_OSWE = IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE;
-	}
-}
-
-#ifdef CONFIG_PCI
-static int ixp4xx_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
-{
-	return (dma_addr + size) > SZ_64M;
-}
-
-static int ixp4xx_platform_notify_remove(struct device *dev)
-{
-	if (dev_is_pci(dev))
-		dmabounce_unregister_dev(dev);
-
-	return 0;
-}
-#endif
-
-/*
- * Setup DMA mask to 64MB on PCI devices and 4 GB on all other things.
- */
-static int ixp4xx_platform_notify(struct device *dev)
-{
-	dev->dma_mask = &dev->coherent_dma_mask;
-
-#ifdef CONFIG_PCI
-	if (dev_is_pci(dev)) {
-		dev->coherent_dma_mask = DMA_BIT_MASK(28); /* 64 MB */
-		dmabounce_register_dev(dev, 2048, 4096, ixp4xx_needs_bounce);
-		return 0;
-	}
-#endif
-
-	dev->coherent_dma_mask = DMA_BIT_MASK(32);
-	return 0;
-}
-
-int dma_set_coherent_mask(struct device *dev, u64 mask)
-{
-	if (dev_is_pci(dev))
-		mask &= DMA_BIT_MASK(28); /* 64 MB */
-
-	if ((mask & DMA_BIT_MASK(28)) == DMA_BIT_MASK(28)) {
-		dev->coherent_dma_mask = mask;
-		return 0;
-	}
-
-	return -EIO;		/* device wanted sub-64MB mask */
-}
-EXPORT_SYMBOL(dma_set_coherent_mask);
-
-#ifdef CONFIG_IXP4XX_INDIRECT_PCI
-/*
- * In the case of using indirect PCI, we simply return the actual PCI
- * address and our read/write implementation use that to drive the
- * access registers. If something outside of PCI is ioremap'd, we
- * fallback to the default.
- */
-
-static void __iomem *ixp4xx_ioremap_caller(phys_addr_t addr, size_t size,
-					   unsigned int mtype, void *caller)
-{
-	if (!is_pci_memory(addr))
-		return __arm_ioremap_caller(addr, size, mtype, caller);
-
-	return (void __iomem *)addr;
-}
-
-static void ixp4xx_iounmap(volatile void __iomem *addr)
-{
-	if (!is_pci_memory((__force u32)addr))
-		__iounmap(addr);
-}
-#endif
-
-void __init ixp4xx_init_early(void)
-{
-	platform_notify = ixp4xx_platform_notify;
-#ifdef CONFIG_PCI
-	platform_notify_remove = ixp4xx_platform_notify_remove;
-#endif
-#ifdef CONFIG_IXP4XX_INDIRECT_PCI
-	arch_ioremap_caller = ixp4xx_ioremap_caller;
-	arch_iounmap = ixp4xx_iounmap;
-#endif
-}
diff --git a/arch/arm/mach-ixp4xx/gateway7001-pci.c b/arch/arm/mach-ixp4xx/gateway7001-pci.c
deleted file mode 100644
index 3c3ee9dad6d8..000000000000
--- a/arch/arm/mach-ixp4xx/gateway7001-pci.c
+++ /dev/null
@@ -1,61 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arch/mach-ixp4xx/gateway7001-pci.c
- *
- * PCI setup routines for Gateway 7001
- *
- * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
- *
- * based on coyote-pci.c:
- *	Copyright (C) 2002 Jungo Software Technologies.
- *	Copyright (C) 2003 MontaVista Softwrae, Inc.
- *
- * Maintainer: Imre Kaloz <kaloz@openwrt.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-
-#include <asm/mach/pci.h>
-
-#include "irqs.h"
-
-void __init gateway7001_pci_preinit(void)
-{
-	irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
-
-	ixp4xx_pci_preinit();
-}
-
-static int __init gateway7001_map_irq(const struct pci_dev *dev, u8 slot,
-	u8 pin)
-{
-	if (slot == 1)
-		return IRQ_IXP4XX_GPIO11;
-	else if (slot == 2)
-		return IRQ_IXP4XX_GPIO10;
-	else return -1;
-}
-
-struct hw_pci gateway7001_pci __initdata = {
-	.nr_controllers = 1,
-	.ops		= &ixp4xx_ops,
-	.preinit =        gateway7001_pci_preinit,
-	.setup =          ixp4xx_setup,
-	.map_irq =        gateway7001_map_irq,
-};
-
-int __init gateway7001_pci_init(void)
-{
-	if (machine_is_gateway7001())
-		pci_common_init(&gateway7001_pci);
-	return 0;
-}
-
-subsys_initcall(gateway7001_pci_init);
diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c
deleted file mode 100644
index 678e7dfff0e5..000000000000
--- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
+++ /dev/null
@@ -1,113 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/arm/mach-ixp4xx/gateway7001-setup.c
- *
- * Board setup for the Gateway 7001 board
- *
- * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
- *
- * based on coyote-setup.c:
- *      Copyright (C) 2003-2005 MontaVista Software, Inc.
- *
- * Author: Imre Kaloz <Kaloz@openwrt.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_8250.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-#include "irqs.h"
-
-static struct flash_platform_data gateway7001_flash_data = {
-	.map_name	= "cfi_probe",
-	.width		= 2,
-};
-
-static struct resource gateway7001_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device gateway7001_flash = {
-	.name		= "IXP4XX-Flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &gateway7001_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &gateway7001_flash_resource,
-};
-
-static struct resource gateway7001_uart_resource = {
-	.start	= IXP4XX_UART2_BASE_PHYS,
-	.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct plat_serial8250_port gateway7001_uart_data[] = {
-	{
-		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{ },
-};
-
-static struct platform_device gateway7001_uart = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= gateway7001_uart_data,
-	},
-	.num_resources	= 1,
-	.resource	= &gateway7001_uart_resource,
-};
-
-static struct platform_device *gateway7001_devices[] __initdata = {
-	&gateway7001_flash,
-	&gateway7001_uart
-};
-
-static void __init gateway7001_init(void)
-{
-	ixp4xx_sys_init();
-
-	gateway7001_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-	gateway7001_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-
-	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-
-	platform_add_devices(gateway7001_devices, ARRAY_SIZE(gateway7001_devices));
-}
-
-#ifdef CONFIG_MACH_GATEWAY7001
-MACHINE_START(GATEWAY7001, "Gateway 7001 AP")
-	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.init_time	= ixp4xx_timer_init,
-	.atag_offset	= 0x100,
-	.init_machine	= gateway7001_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-	.restart	= ixp4xx_restart,
-MACHINE_END
-#endif
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
deleted file mode 100644
index 07b50dfcc489..000000000000
--- a/arch/arm/mach-ixp4xx/goramo_mlr.c
+++ /dev/null
@@ -1,532 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Goramo MultiLink router platform code
- * Copyright (C) 2006-2009 Krzysztof Halasa <khc@pm.waw.pl>
- */
-
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/hdlc.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/platform_data/wan_ixp4xx_hss.h>
-#include <linux/serial_8250.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/pci.h>
-#include <asm/system_info.h>
-
-#include "irqs.h"
-
-#define SLOT_ETHA		0x0B	/* IDSEL = AD21 */
-#define SLOT_ETHB		0x0C	/* IDSEL = AD20 */
-#define SLOT_MPCI		0x0D	/* IDSEL = AD19 */
-#define SLOT_NEC		0x0E	/* IDSEL = AD18 */
-
-/* GPIO lines */
-#define GPIO_SCL		0
-#define GPIO_SDA		1
-#define GPIO_STR		2
-#define GPIO_IRQ_NEC		3
-#define GPIO_IRQ_ETHA		4
-#define GPIO_IRQ_ETHB		5
-#define GPIO_HSS0_DCD_N		6
-#define GPIO_HSS1_DCD_N		7
-#define GPIO_UART0_DCD		8
-#define GPIO_UART1_DCD		9
-#define GPIO_HSS0_CTS_N		10
-#define GPIO_HSS1_CTS_N		11
-#define GPIO_IRQ_MPCI		12
-#define GPIO_HSS1_RTS_N		13
-#define GPIO_HSS0_RTS_N		14
-/* GPIO15 is not connected */
-
-/* Control outputs from 74HC4094 */
-#define CONTROL_HSS0_CLK_INT	0
-#define CONTROL_HSS1_CLK_INT	1
-#define CONTROL_HSS0_DTR_N	2
-#define CONTROL_HSS1_DTR_N	3
-#define CONTROL_EXT		4
-#define CONTROL_AUTO_RESET	5
-#define CONTROL_PCI_RESET_N	6
-#define CONTROL_EEPROM_WC_N	7
-
-/* offsets from start of flash ROM = 0x50000000 */
-#define CFG_ETH0_ADDRESS	0x40 /* 6 bytes */
-#define CFG_ETH1_ADDRESS	0x46 /* 6 bytes */
-#define CFG_REV			0x4C /* u32 */
-#define CFG_SDRAM_SIZE		0x50 /* u32 */
-#define CFG_SDRAM_CONF		0x54 /* u32 */
-#define CFG_SDRAM_MODE		0x58 /* u32 */
-#define CFG_SDRAM_REFRESH	0x5C /* u32 */
-
-#define CFG_HW_BITS		0x60 /* u32 */
-#define  CFG_HW_USB_PORTS	0x00000007 /* 0 = no NEC chip, 1-5 = ports # */
-#define  CFG_HW_HAS_PCI_SLOT	0x00000008
-#define  CFG_HW_HAS_ETH0	0x00000010
-#define  CFG_HW_HAS_ETH1	0x00000020
-#define  CFG_HW_HAS_HSS0	0x00000040
-#define  CFG_HW_HAS_HSS1	0x00000080
-#define  CFG_HW_HAS_UART0	0x00000100
-#define  CFG_HW_HAS_UART1	0x00000200
-#define  CFG_HW_HAS_EEPROM	0x00000400
-
-#define FLASH_CMD_READ_ARRAY	0xFF
-#define FLASH_CMD_READ_ID	0x90
-#define FLASH_SER_OFF		0x102 /* 0x81 in 16-bit mode */
-
-static u32 hw_bits = 0xFFFFFFFD;    /* assume all hardware present */;
-static u8 control_value;
-
-/*
- * FIXME: this is reimplementing I2C bit-bangining. Move this
- * over to using driver/i2c/busses/i2c-gpio.c like all other boards
- * and register proper I2C device(s) on the bus for this. (See
- * other IXP4xx boards for examples.)
- */
-static void set_scl(u8 value)
-{
-	gpio_set_value(GPIO_SCL, !!value);
-	udelay(3);
-}
-
-static void set_sda(u8 value)
-{
-	gpio_set_value(GPIO_SDA, !!value);
-	udelay(3);
-}
-
-static void set_str(u8 value)
-{
-	gpio_set_value(GPIO_STR, !!value);
-	udelay(3);
-}
-
-static inline void set_control(int line, int value)
-{
-	if (value)
-		control_value |=  (1 << line);
-	else
-		control_value &= ~(1 << line);
-}
-
-
-static void output_control(void)
-{
-	int i;
-
-	gpio_direction_output(GPIO_SCL, 1);
-	gpio_direction_output(GPIO_SDA, 1);
-
-	for (i = 0; i < 8; i++) {
-		set_scl(0);
-		set_sda(control_value & (0x80 >> i)); /* MSB first */
-		set_scl(1);	/* active edge */
-	}
-
-	set_str(1);
-	set_str(0);
-
-	set_scl(0);
-	set_sda(1);		/* Be ready for START */
-	set_scl(1);
-}
-
-
-static void (*set_carrier_cb_tab[2])(void *pdev, int carrier);
-
-static int hss_set_clock(int port, unsigned int clock_type)
-{
-	int ctrl_int = port ? CONTROL_HSS1_CLK_INT : CONTROL_HSS0_CLK_INT;
-
-	switch (clock_type) {
-	case CLOCK_DEFAULT:
-	case CLOCK_EXT:
-		set_control(ctrl_int, 0);
-		output_control();
-		return CLOCK_EXT;
-
-	case CLOCK_INT:
-		set_control(ctrl_int, 1);
-		output_control();
-		return CLOCK_INT;
-
-	default:
-		return -EINVAL;
-	}
-}
-
-static irqreturn_t hss_dcd_irq(int irq, void *pdev)
-{
-	int port = (irq == IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N));
-	int i = gpio_get_value(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N);
-	set_carrier_cb_tab[port](pdev, !i);
-	return IRQ_HANDLED;
-}
-
-
-static int hss_open(int port, void *pdev,
-		    void (*set_carrier_cb)(void *pdev, int carrier))
-{
-	int i, irq;
-
-	if (!port)
-		irq = IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N);
-	else
-		irq = IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N);
-
-	i = gpio_get_value(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N);
-	set_carrier_cb(pdev, !i);
-
-	set_carrier_cb_tab[!!port] = set_carrier_cb;
-
-	if ((i = request_irq(irq, hss_dcd_irq, 0, "IXP4xx HSS", pdev)) != 0) {
-		printk(KERN_ERR "ixp4xx_hss: failed to request IRQ%i (%i)\n",
-		       irq, i);
-		return i;
-	}
-
-	set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 0);
-	output_control();
-	gpio_set_value(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 0);
-	return 0;
-}
-
-static void hss_close(int port, void *pdev)
-{
-	free_irq(port ? IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N) :
-		 IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N), pdev);
-	set_carrier_cb_tab[!!port] = NULL; /* catch bugs */
-
-	set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 1);
-	output_control();
-	gpio_set_value(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 1);
-}
-
-
-/* Flash memory */
-static struct flash_platform_data flash_data = {
-	.map_name	= "cfi_probe",
-	.width		= 2,
-};
-
-static struct resource flash_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device device_flash = {
-	.name		= "IXP4XX-Flash",
-	.id		= 0,
-	.dev		= { .platform_data = &flash_data },
-	.num_resources	= 1,
-	.resource	= &flash_resource,
-};
-
-/* IXP425 2 UART ports */
-static struct resource uart_resources[] = {
-	{
-		.start		= IXP4XX_UART1_BASE_PHYS,
-		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= IXP4XX_UART2_BASE_PHYS,
-		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	}
-};
-
-static struct plat_serial8250_port uart_data[] = {
-	{
-		.mapbase	= IXP4XX_UART1_BASE_PHYS,
-		.membase	= (char __iomem *)IXP4XX_UART1_BASE_VIRT +
-			REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART1,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{
-		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-		.membase	= (char __iomem *)IXP4XX_UART2_BASE_VIRT +
-			REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{ },
-};
-
-static struct platform_device device_uarts = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev.platform_data	= uart_data,
-	.num_resources		= 2,
-	.resource		= uart_resources,
-};
-
-
-/* Built-in 10/100 Ethernet MAC interfaces */
-static struct resource eth_npeb_resources[] = {
-	{
-		.start		= IXP4XX_EthB_BASE_PHYS,
-		.end		= IXP4XX_EthB_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct resource eth_npec_resources[] = {
-	{
-		.start		= IXP4XX_EthC_BASE_PHYS,
-		.end		= IXP4XX_EthC_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct eth_plat_info eth_plat[] = {
-	{
-		.phy		= 0,
-		.rxq		= 3,
-		.txreadyq	= 32,
-	}, {
-		.phy		= 1,
-		.rxq		= 4,
-		.txreadyq	= 33,
-	}
-};
-
-static struct platform_device device_eth_tab[] = {
-	{
-		.name			= "ixp4xx_eth",
-		.id			= IXP4XX_ETH_NPEB,
-		.dev.platform_data	= eth_plat,
-		.num_resources		= ARRAY_SIZE(eth_npeb_resources),
-		.resource		= eth_npeb_resources,
-	}, {
-		.name			= "ixp4xx_eth",
-		.id			= IXP4XX_ETH_NPEC,
-		.dev.platform_data	= eth_plat + 1,
-		.num_resources		= ARRAY_SIZE(eth_npec_resources),
-		.resource		= eth_npec_resources,
-	}
-};
-
-
-/* IXP425 2 synchronous serial ports */
-static struct hss_plat_info hss_plat[] = {
-	{
-		.set_clock	= hss_set_clock,
-		.open		= hss_open,
-		.close		= hss_close,
-		.txreadyq	= 34,
-	}, {
-		.set_clock	= hss_set_clock,
-		.open		= hss_open,
-		.close		= hss_close,
-		.txreadyq	= 35,
-	}
-};
-
-static struct platform_device device_hss_tab[] = {
-	{
-		.name			= "ixp4xx_hss",
-		.id			= 0,
-		.dev.platform_data	= hss_plat,
-	}, {
-		.name			= "ixp4xx_hss",
-		.id			= 1,
-		.dev.platform_data	= hss_plat + 1,
-	}
-};
-
-
-static struct platform_device *device_tab[7] __initdata = {
-	&device_flash,		/* index 0 */
-};
-
-static inline u8 __init flash_readb(u8 __iomem *flash, u32 addr)
-{
-#ifdef __ARMEB__
-	return __raw_readb(flash + addr);
-#else
-	return __raw_readb(flash + (addr ^ 3));
-#endif
-}
-
-static inline u16 __init flash_readw(u8 __iomem *flash, u32 addr)
-{
-#ifdef __ARMEB__
-	return __raw_readw(flash + addr);
-#else
-	return __raw_readw(flash + (addr ^ 2));
-#endif
-}
-
-static void __init gmlr_init(void)
-{
-	u8 __iomem *flash;
-	int i, devices = 1; /* flash */
-
-	ixp4xx_sys_init();
-
-	if ((flash = ioremap(IXP4XX_EXP_BUS_BASE_PHYS, 0x80)) == NULL)
-		printk(KERN_ERR "goramo-mlr: unable to access system"
-		       " configuration data\n");
-	else {
-		system_rev = __raw_readl(flash + CFG_REV);
-		hw_bits = __raw_readl(flash + CFG_HW_BITS);
-
-		for (i = 0; i < ETH_ALEN; i++) {
-			eth_plat[0].hwaddr[i] =
-				flash_readb(flash, CFG_ETH0_ADDRESS + i);
-			eth_plat[1].hwaddr[i] =
-				flash_readb(flash, CFG_ETH1_ADDRESS + i);
-		}
-
-		__raw_writew(FLASH_CMD_READ_ID, flash);
-		system_serial_high = flash_readw(flash, FLASH_SER_OFF);
-		system_serial_high <<= 16;
-		system_serial_high |= flash_readw(flash, FLASH_SER_OFF + 2);
-		system_serial_low = flash_readw(flash, FLASH_SER_OFF + 4);
-		system_serial_low <<= 16;
-		system_serial_low |= flash_readw(flash, FLASH_SER_OFF + 6);
-		__raw_writew(FLASH_CMD_READ_ARRAY, flash);
-
-		iounmap(flash);
-	}
-
-	switch (hw_bits & (CFG_HW_HAS_UART0 | CFG_HW_HAS_UART1)) {
-	case CFG_HW_HAS_UART0:
-		memset(&uart_data[1], 0, sizeof(uart_data[1]));
-		device_uarts.num_resources = 1;
-		break;
-
-	case CFG_HW_HAS_UART1:
-		device_uarts.dev.platform_data = &uart_data[1];
-		device_uarts.resource = &uart_resources[1];
-		device_uarts.num_resources = 1;
-		break;
-	}
-	if (hw_bits & (CFG_HW_HAS_UART0 | CFG_HW_HAS_UART1))
-		device_tab[devices++] = &device_uarts; /* max index 1 */
-
-	if (hw_bits & CFG_HW_HAS_ETH0)
-		device_tab[devices++] = &device_eth_tab[0]; /* max index 2 */
-	if (hw_bits & CFG_HW_HAS_ETH1)
-		device_tab[devices++] = &device_eth_tab[1]; /* max index 3 */
-
-	if (hw_bits & CFG_HW_HAS_HSS0)
-		device_tab[devices++] = &device_hss_tab[0]; /* max index 4 */
-	if (hw_bits & CFG_HW_HAS_HSS1)
-		device_tab[devices++] = &device_hss_tab[1]; /* max index 5 */
-
-	hss_plat[0].timer_freq = ixp4xx_timer_freq;
-	hss_plat[1].timer_freq = ixp4xx_timer_freq;
-
-	gpio_request(GPIO_SCL, "SCL/clock");
-	gpio_request(GPIO_SDA, "SDA/data");
-	gpio_request(GPIO_STR, "strobe");
-	gpio_request(GPIO_HSS0_RTS_N, "HSS0 RTS");
-	gpio_request(GPIO_HSS1_RTS_N, "HSS1 RTS");
-	gpio_request(GPIO_HSS0_DCD_N, "HSS0 DCD");
-	gpio_request(GPIO_HSS1_DCD_N, "HSS1 DCD");
-
-	gpio_direction_output(GPIO_SCL, 1);
-	gpio_direction_output(GPIO_SDA, 1);
-	gpio_direction_output(GPIO_STR, 0);
-	gpio_direction_output(GPIO_HSS0_RTS_N, 1);
-	gpio_direction_output(GPIO_HSS1_RTS_N, 1);
-	gpio_direction_input(GPIO_HSS0_DCD_N);
-	gpio_direction_input(GPIO_HSS1_DCD_N);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N), IRQ_TYPE_EDGE_BOTH);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N), IRQ_TYPE_EDGE_BOTH);
-
-	set_control(CONTROL_HSS0_DTR_N, 1);
-	set_control(CONTROL_HSS1_DTR_N, 1);
-	set_control(CONTROL_EEPROM_WC_N, 1);
-	set_control(CONTROL_PCI_RESET_N, 1);
-	output_control();
-
-	msleep(1);	      /* Wait for PCI devices to initialize */
-
-	flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-	flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-
-	platform_add_devices(device_tab, devices);
-}
-
-
-#ifdef CONFIG_PCI
-static void __init gmlr_pci_preinit(void)
-{
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHA), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHB), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_NEC), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_MPCI), IRQ_TYPE_LEVEL_LOW);
-	ixp4xx_pci_preinit();
-}
-
-static void __init gmlr_pci_postinit(void)
-{
-	if ((hw_bits & CFG_HW_USB_PORTS) >= 2 &&
-	    (hw_bits & CFG_HW_USB_PORTS) < 5) {
-		/* need to adjust number of USB ports on NEC chip */
-		u32 value, addr = BIT(32 - SLOT_NEC) | 0xE0;
-		if (!ixp4xx_pci_read(addr, NP_CMD_CONFIGREAD, &value)) {
-			value &= ~7;
-			value |= (hw_bits & CFG_HW_USB_PORTS);
-			ixp4xx_pci_write(addr, NP_CMD_CONFIGWRITE, value);
-		}
-	}
-}
-
-static int __init gmlr_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	switch(slot) {
-	case SLOT_ETHA:	return IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHA);
-	case SLOT_ETHB:	return IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHB);
-	case SLOT_NEC:	return IXP4XX_GPIO_IRQ(GPIO_IRQ_NEC);
-	default:	return IXP4XX_GPIO_IRQ(GPIO_IRQ_MPCI);
-	}
-}
-
-static struct hw_pci gmlr_hw_pci __initdata = {
-	.nr_controllers = 1,
-	.ops		= &ixp4xx_ops,
-	.preinit	= gmlr_pci_preinit,
-	.postinit	= gmlr_pci_postinit,
-	.setup		= ixp4xx_setup,
-	.map_irq	= gmlr_map_irq,
-};
-
-static int __init gmlr_pci_init(void)
-{
-	if (machine_is_goramo_mlr() &&
-	    (hw_bits & (CFG_HW_USB_PORTS | CFG_HW_HAS_PCI_SLOT)))
-		pci_common_init(&gmlr_hw_pci);
-	return 0;
-}
-
-subsys_initcall(gmlr_pci_init);
-#endif /* CONFIG_PCI */
-
-
-MACHINE_START(GORAMO_MLR, "MultiLink")
-	/* Maintainer: Krzysztof Halasa */
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.init_time	= ixp4xx_timer_init,
-	.atag_offset	= 0x100,
-	.init_machine	= gmlr_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-	.restart	= ixp4xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/include/mach/hardware.h b/arch/arm/mach-ixp4xx/include/mach/hardware.h
deleted file mode 100644
index b2b7301ce503..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/hardware.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ixp4xx/include/mach/hardware.h 
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- */
-
-/*
- * Hardware definitions for IXP4xx based systems
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#define __ASM_ARCH_HARDWARE_H__
-
-#ifdef CONFIG_IXP4XX_INDIRECT_PCI
-#define PCIBIOS_MAX_MEM		0x4FFFFFFF
-#else
-#define PCIBIOS_MAX_MEM		0x4BFFFFFF
-#endif
-
-/* Register locations and bits */
-#include "ixp4xx-regs.h"
-
-#ifndef __ASSEMBLER__
-#include <linux/soc/ixp4xx/cpu.h>
-#endif
-
-/* Platform helper functions and definitions */
-#include "platform.h"
-
-#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h
deleted file mode 100644
index 014cf6dcaf8b..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/io.h
+++ /dev/null
@@ -1,545 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ixp4xx/include/mach/io.h
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002-2005  MontaVista Software, Inc.
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <linux/bitops.h>
-
-#include <mach/hardware.h>
-
-extern int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data);
-extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data);
-
-
-/*
- * IXP4xx provides two methods of accessing PCI memory space:
- *
- * 1) A direct mapped window from 0x48000000 to 0x4BFFFFFF (64MB).
- *    To access PCI via this space, we simply ioremap() the BAR
- *    into the kernel and we can use the standard read[bwl]/write[bwl]
- *    macros. This is the preffered method due to speed but it
- *    limits the system to just 64MB of PCI memory. This can be
- *    problematic if using video cards and other memory-heavy targets.
- *
- * 2) If > 64MB of memory space is required, the IXP4xx can use indirect
- *    registers to access the whole 4 GB of PCI memory space (as we do below
- *    for I/O transactions). This allows currently for up to 1 GB (0x10000000
- *    to 0x4FFFFFFF) of memory on the bus. The disadvantage of this is that
- *    every PCI access requires three local register accesses plus a spinlock,
- *    but in some cases the performance hit is acceptable. In addition, you
- *    cannot mmap() PCI devices in this case.
- */
-#ifdef	CONFIG_IXP4XX_INDIRECT_PCI
-
-/*
- * In the case of using indirect PCI, we simply return the actual PCI
- * address and our read/write implementation use that to drive the 
- * access registers. If something outside of PCI is ioremap'd, we
- * fallback to the default.
- */
-
-extern unsigned long pcibios_min_mem;
-static inline int is_pci_memory(u32 addr)
-{
-	return (addr >= pcibios_min_mem) && (addr <= 0x4FFFFFFF);
-}
-
-#define writeb(v, p)			__indirect_writeb(v, p)
-#define writew(v, p)			__indirect_writew(v, p)
-#define writel(v, p)			__indirect_writel(v, p)
-
-#define writeb_relaxed(v, p)		__indirect_writeb(v, p)
-#define writew_relaxed(v, p)		__indirect_writew(v, p)
-#define writel_relaxed(v, p)		__indirect_writel(v, p)
-
-#define writesb(p, v, l)		__indirect_writesb(p, v, l)
-#define writesw(p, v, l)		__indirect_writesw(p, v, l)
-#define writesl(p, v, l)		__indirect_writesl(p, v, l)
-
-#define readb(p)			__indirect_readb(p)
-#define readw(p)			__indirect_readw(p)
-#define readl(p)			__indirect_readl(p)
-
-#define readb_relaxed(p)		__indirect_readb(p)
-#define readw_relaxed(p)		__indirect_readw(p)
-#define readl_relaxed(p)		__indirect_readl(p)
-
-#define readsb(p, v, l)			__indirect_readsb(p, v, l)
-#define readsw(p, v, l)			__indirect_readsw(p, v, l)
-#define readsl(p, v, l)			__indirect_readsl(p, v, l)
-
-static inline void __indirect_writeb(u8 value, volatile void __iomem *p)
-{
-	u32 addr = (u32)p;
-	u32 n, byte_enables, data;
-
-	if (!is_pci_memory(addr)) {
-		__raw_writeb(value, p);
-		return;
-	}
-
-	n = addr % 4;
-	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
-	data = value << (8*n);
-	ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data);
-}
-
-static inline void __indirect_writesb(volatile void __iomem *bus_addr,
-				      const void *p, int count)
-{
-	const u8 *vaddr = p;
-
-	while (count--)
-		writeb(*vaddr++, bus_addr);
-}
-
-static inline void __indirect_writew(u16 value, volatile void __iomem *p)
-{
-	u32 addr = (u32)p;
-	u32 n, byte_enables, data;
-
-	if (!is_pci_memory(addr)) {
-		__raw_writew(value, p);
-		return;
-	}
-
-	n = addr % 4;
-	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
-	data = value << (8*n);
-	ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data);
-}
-
-static inline void __indirect_writesw(volatile void __iomem *bus_addr,
-				      const void *p, int count)
-{
-	const u16 *vaddr = p;
-
-	while (count--)
-		writew(*vaddr++, bus_addr);
-}
-
-static inline void __indirect_writel(u32 value, volatile void __iomem *p)
-{
-	u32 addr = (__force u32)p;
-
-	if (!is_pci_memory(addr)) {
-		__raw_writel(value, p);
-		return;
-	}
-
-	ixp4xx_pci_write(addr, NP_CMD_MEMWRITE, value);
-}
-
-static inline void __indirect_writesl(volatile void __iomem *bus_addr,
-				      const void *p, int count)
-{
-	const u32 *vaddr = p;
-	while (count--)
-		writel(*vaddr++, bus_addr);
-}
-
-static inline u8 __indirect_readb(const volatile void __iomem *p)
-{
-	u32 addr = (u32)p;
-	u32 n, byte_enables, data;
-
-	if (!is_pci_memory(addr))
-		return __raw_readb(p);
-
-	n = addr % 4;
-	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
-	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_MEMREAD, &data))
-		return 0xff;
-
-	return data >> (8*n);
-}
-
-static inline void __indirect_readsb(const volatile void __iomem *bus_addr,
-				     void *p, u32 count)
-{
-	u8 *vaddr = p;
-
-	while (count--)
-		*vaddr++ = readb(bus_addr);
-}
-
-static inline u16 __indirect_readw(const volatile void __iomem *p)
-{
-	u32 addr = (u32)p;
-	u32 n, byte_enables, data;
-
-	if (!is_pci_memory(addr))
-		return __raw_readw(p);
-
-	n = addr % 4;
-	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
-	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_MEMREAD, &data))
-		return 0xffff;
-
-	return data>>(8*n);
-}
-
-static inline void __indirect_readsw(const volatile void __iomem *bus_addr,
-				     void *p, u32 count)
-{
-	u16 *vaddr = p;
-
-	while (count--)
-		*vaddr++ = readw(bus_addr);
-}
-
-static inline u32 __indirect_readl(const volatile void __iomem *p)
-{
-	u32 addr = (__force u32)p;
-	u32 data;
-
-	if (!is_pci_memory(addr))
-		return __raw_readl(p);
-
-	if (ixp4xx_pci_read(addr, NP_CMD_MEMREAD, &data))
-		return 0xffffffff;
-
-	return data;
-}
-
-static inline void __indirect_readsl(const volatile void __iomem *bus_addr,
-				     void *p, u32 count)
-{
-	u32 *vaddr = p;
-
-	while (count--)
-		*vaddr++ = readl(bus_addr);
-}
-
-
-/*
- * We can use the built-in functions b/c they end up calling writeb/readb
- */
-#define memset_io(c,v,l)		_memset_io((c),(v),(l))
-#define memcpy_fromio(a,c,l)		_memcpy_fromio((a),(c),(l))
-#define memcpy_toio(c,a,l)		_memcpy_toio((c),(a),(l))
-
-#endif /* CONFIG_IXP4XX_INDIRECT_PCI */
-
-#ifndef CONFIG_PCI
-
-#define	__io(v)		__typesafe_io(v)
-
-#else
-
-/*
- * IXP4xx does not have a transparent cpu -> PCI I/O translation
- * window.  Instead, it has a set of registers that must be tweaked
- * with the proper byte lanes, command types, and address for the
- * transaction.  This means that we need to override the default
- * I/O functions.
- */
-
-#define outb outb
-static inline void outb(u8 value, u32 addr)
-{
-	u32 n, byte_enables, data;
-	n = addr % 4;
-	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
-	data = value << (8*n);
-	ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data);
-}
-
-#define outsb outsb
-static inline void outsb(u32 io_addr, const void *p, u32 count)
-{
-	const u8 *vaddr = p;
-
-	while (count--)
-		outb(*vaddr++, io_addr);
-}
-
-#define outw outw
-static inline void outw(u16 value, u32 addr)
-{
-	u32 n, byte_enables, data;
-	n = addr % 4;
-	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
-	data = value << (8*n);
-	ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data);
-}
-
-#define outsw outsw
-static inline void outsw(u32 io_addr, const void *p, u32 count)
-{
-	const u16 *vaddr = p;
-	while (count--)
-		outw(cpu_to_le16(*vaddr++), io_addr);
-}
-
-#define outl outl
-static inline void outl(u32 value, u32 addr)
-{
-	ixp4xx_pci_write(addr, NP_CMD_IOWRITE, value);
-}
-
-#define outsl outsl
-static inline void outsl(u32 io_addr, const void *p, u32 count)
-{
-	const u32 *vaddr = p;
-	while (count--)
-		outl(cpu_to_le32(*vaddr++), io_addr);
-}
-
-#define inb inb
-static inline u8 inb(u32 addr)
-{
-	u32 n, byte_enables, data;
-	n = addr % 4;
-	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
-	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_IOREAD, &data))
-		return 0xff;
-
-	return data >> (8*n);
-}
-
-#define insb insb
-static inline void insb(u32 io_addr, void *p, u32 count)
-{
-	u8 *vaddr = p;
-	while (count--)
-		*vaddr++ = inb(io_addr);
-}
-
-#define inw inw
-static inline u16 inw(u32 addr)
-{
-	u32 n, byte_enables, data;
-	n = addr % 4;
-	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
-	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_IOREAD, &data))
-		return 0xffff;
-
-	return data>>(8*n);
-}
-
-#define insw insw
-static inline void insw(u32 io_addr, void *p, u32 count)
-{
-	u16 *vaddr = p;
-	while (count--)
-		*vaddr++ = le16_to_cpu(inw(io_addr));
-}
-
-#define inl inl
-static inline u32 inl(u32 addr)
-{
-	u32 data;
-	if (ixp4xx_pci_read(addr, NP_CMD_IOREAD, &data))
-		return 0xffffffff;
-
-	return data;
-}
-
-#define insl insl
-static inline void insl(u32 io_addr, void *p, u32 count)
-{
-	u32 *vaddr = p;
-	while (count--)
-		*vaddr++ = le32_to_cpu(inl(io_addr));
-}
-
-#define PIO_OFFSET      0x10000UL
-#define PIO_MASK        0x0ffffUL
-
-#define	__is_io_address(p)	(((unsigned long)p >= PIO_OFFSET) && \
-					((unsigned long)p <= (PIO_MASK + PIO_OFFSET)))
-
-#define	ioread8(p)			ioread8(p)
-static inline u8 ioread8(const void __iomem *addr)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		return (unsigned int)inb(port & PIO_MASK);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		return (unsigned int)__raw_readb(addr);
-#else
-		return (unsigned int)__indirect_readb(addr);
-#endif
-}
-
-#define	ioread8_rep(p, v, c)		ioread8_rep(p, v, c)
-static inline void ioread8_rep(const void __iomem *addr, void *vaddr, u32 count)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		insb(port & PIO_MASK, vaddr, count);
-	else
-#ifndef	CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_readsb(addr, vaddr, count);
-#else
-		__indirect_readsb(addr, vaddr, count);
-#endif
-}
-
-#define	ioread16(p)			ioread16(p)
-static inline u16 ioread16(const void __iomem *addr)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		return	(unsigned int)inw(port & PIO_MASK);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		return le16_to_cpu((__force __le16)__raw_readw(addr));
-#else
-		return (unsigned int)__indirect_readw(addr);
-#endif
-}
-
-#define	ioread16_rep(p, v, c)		ioread16_rep(p, v, c)
-static inline void ioread16_rep(const void __iomem *addr, void *vaddr,
-				u32 count)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		insw(port & PIO_MASK, vaddr, count);
-	else
-#ifndef	CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_readsw(addr, vaddr, count);
-#else
-		__indirect_readsw(addr, vaddr, count);
-#endif
-}
-
-#define	ioread32(p)			ioread32(p)
-static inline u32 ioread32(const void __iomem *addr)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		return	(unsigned int)inl(port & PIO_MASK);
-	else {
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		return le32_to_cpu((__force __le32)__raw_readl(addr));
-#else
-		return (unsigned int)__indirect_readl(addr);
-#endif
-	}
-}
-
-#define	ioread32_rep(p, v, c)		ioread32_rep(p, v, c)
-static inline void ioread32_rep(const void __iomem *addr, void *vaddr,
-				u32 count)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		insl(port & PIO_MASK, vaddr, count);
-	else
-#ifndef	CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_readsl(addr, vaddr, count);
-#else
-		__indirect_readsl(addr, vaddr, count);
-#endif
-}
-
-#define	iowrite8(v, p)			iowrite8(v, p)
-static inline void iowrite8(u8 value, void __iomem *addr)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		outb(value, port & PIO_MASK);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_writeb(value, addr);
-#else
-		__indirect_writeb(value, addr);
-#endif
-}
-
-#define	iowrite8_rep(p, v, c)		iowrite8_rep(p, v, c)
-static inline void iowrite8_rep(void __iomem *addr, const void *vaddr,
-				u32 count)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		outsb(port & PIO_MASK, vaddr, count);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_writesb(addr, vaddr, count);
-#else
-		__indirect_writesb(addr, vaddr, count);
-#endif
-}
-
-#define	iowrite16(v, p)			iowrite16(v, p)
-static inline void iowrite16(u16 value, void __iomem *addr)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		outw(value, port & PIO_MASK);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_writew(cpu_to_le16(value), addr);
-#else
-		__indirect_writew(value, addr);
-#endif
-}
-
-#define	iowrite16_rep(p, v, c)		iowrite16_rep(p, v, c)
-static inline void iowrite16_rep(void __iomem *addr, const void *vaddr,
-				 u32 count)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		outsw(port & PIO_MASK, vaddr, count);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_writesw(addr, vaddr, count);
-#else
-		__indirect_writesw(addr, vaddr, count);
-#endif
-}
-
-#define	iowrite32(v, p)			iowrite32(v, p)
-static inline void iowrite32(u32 value, void __iomem *addr)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		outl(value, port & PIO_MASK);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_writel((u32 __force)cpu_to_le32(value), addr);
-#else
-		__indirect_writel(value, addr);
-#endif
-}
-
-#define	iowrite32_rep(p, v, c)		iowrite32_rep(p, v, c)
-static inline void iowrite32_rep(void __iomem *addr, const void *vaddr,
-				 u32 count)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		outsl(port & PIO_MASK, vaddr, count);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_writesl(addr, vaddr, count);
-#else
-		__indirect_writesl(addr, vaddr, count);
-#endif
-}
-
-#define ioport_map(port, nr) ioport_map(port, nr)
-static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
-{
-	return ((void __iomem*)((port) + PIO_OFFSET));
-}
-#define	ioport_unmap(addr) ioport_unmap(addr)
-static inline void ioport_unmap(void __iomem *addr)
-{
-}
-#endif /* CONFIG_PCI */
-
-#endif /* __ASM_ARM_ARCH_IO_H */
diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
deleted file mode 100644
index 74e63d4531aa..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
+++ /dev/null
@@ -1,303 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
- *
- * Register definitions for IXP4xx chipset. This file contains 
- * register location and bit definitions only. Platform specific 
- * definitions and helper function declarations are in platform.h 
- * and machine-name.h.
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- */
-
-#ifndef _ASM_ARM_IXP4XX_H_
-#define _ASM_ARM_IXP4XX_H_
-
-/*
- * IXP4xx Linux Memory Map:
- *
- * Phy		Size		Virt		Description
- * =========================================================================
- *
- * 0x00000000	0x10000000(max)	PAGE_OFFSET	System RAM
- *
- * 0x48000000	0x04000000	ioremap'd	PCI Memory Space
- *
- * 0x50000000	0x10000000	ioremap'd	EXP BUS
- *
- * 0xC8000000	0x00013000	0xFEF00000	On-Chip Peripherals
- *
- * 0xC0000000	0x00001000	0xFEF13000	PCI CFG
- *
- * 0xC4000000	0x00001000	0xFEF14000	EXP CFG
- *
- * 0x60000000	0x00004000	0xFEF15000	QMgr
- */
-
-/*
- * Queue Manager
- */
-#define IXP4XX_QMGR_BASE_PHYS		0x60000000
-
-/*
- * Peripheral space, including debug UART. Must be section-aligned so that
- * it can be used with the low-level debug code.
- */
-#define IXP4XX_PERIPHERAL_BASE_PHYS	0xC8000000
-#define IXP4XX_PERIPHERAL_BASE_VIRT	IOMEM(0xFEC00000)
-#define IXP4XX_PERIPHERAL_REGION_SIZE	0x00013000
-
-/*
- * PCI Config registers
- */
-#define IXP4XX_PCI_CFG_BASE_PHYS	0xC0000000
-#define IXP4XX_PCI_CFG_BASE_VIRT	IOMEM(0xFEC13000)
-#define IXP4XX_PCI_CFG_REGION_SIZE	0x00001000
-
-/*
- * Expansion BUS Configuration registers
- */
-#define IXP4XX_EXP_CFG_BASE_PHYS	0xC4000000
-#define IXP4XX_EXP_CFG_BASE_VIRT	0xFEC14000
-#define IXP4XX_EXP_CFG_REGION_SIZE	0x00001000
-
-#define IXP4XX_EXP_CS0_OFFSET	0x00
-#define IXP4XX_EXP_CS1_OFFSET   0x04
-#define IXP4XX_EXP_CS2_OFFSET   0x08
-#define IXP4XX_EXP_CS3_OFFSET   0x0C
-#define IXP4XX_EXP_CS4_OFFSET   0x10
-#define IXP4XX_EXP_CS5_OFFSET   0x14
-#define IXP4XX_EXP_CS6_OFFSET   0x18
-#define IXP4XX_EXP_CS7_OFFSET   0x1C
-#define IXP4XX_EXP_CFG0_OFFSET	0x20
-#define IXP4XX_EXP_CFG1_OFFSET	0x24
-#define IXP4XX_EXP_CFG2_OFFSET	0x28
-#define IXP4XX_EXP_CFG3_OFFSET	0x2C
-
-/*
- * Expansion Bus Controller registers.
- */
-#define IXP4XX_EXP_REG(x) ((volatile u32 __iomem *)(IXP4XX_EXP_CFG_BASE_VIRT+(x)))
-
-#define IXP4XX_EXP_CS0      IXP4XX_EXP_REG(IXP4XX_EXP_CS0_OFFSET)
-#define IXP4XX_EXP_CS1      IXP4XX_EXP_REG(IXP4XX_EXP_CS1_OFFSET)
-#define IXP4XX_EXP_CS2      IXP4XX_EXP_REG(IXP4XX_EXP_CS2_OFFSET) 
-#define IXP4XX_EXP_CS3      IXP4XX_EXP_REG(IXP4XX_EXP_CS3_OFFSET)
-#define IXP4XX_EXP_CS4      IXP4XX_EXP_REG(IXP4XX_EXP_CS4_OFFSET)
-#define IXP4XX_EXP_CS5      IXP4XX_EXP_REG(IXP4XX_EXP_CS5_OFFSET)
-#define IXP4XX_EXP_CS6      IXP4XX_EXP_REG(IXP4XX_EXP_CS6_OFFSET)     
-#define IXP4XX_EXP_CS7      IXP4XX_EXP_REG(IXP4XX_EXP_CS7_OFFSET)
-
-#define IXP4XX_EXP_CFG0     IXP4XX_EXP_REG(IXP4XX_EXP_CFG0_OFFSET) 
-#define IXP4XX_EXP_CFG1     IXP4XX_EXP_REG(IXP4XX_EXP_CFG1_OFFSET) 
-#define IXP4XX_EXP_CFG2     IXP4XX_EXP_REG(IXP4XX_EXP_CFG2_OFFSET) 
-#define IXP4XX_EXP_CFG3     IXP4XX_EXP_REG(IXP4XX_EXP_CFG3_OFFSET)
-
-
-/*
- * Peripheral Space Register Region Base Addresses
- */
-#define IXP4XX_UART1_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x0000)
-#define IXP4XX_UART2_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x1000)
-#define IXP4XX_PMU_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x2000)
-#define IXP4XX_INTC_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x3000)
-#define IXP4XX_GPIO_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x4000)
-#define IXP4XX_TIMER_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x5000)
-#define IXP4XX_NPEA_BASE_PHYS   	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x6000)
-#define IXP4XX_NPEB_BASE_PHYS   	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x7000)
-#define IXP4XX_NPEC_BASE_PHYS   	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x8000)
-#define IXP4XX_EthB_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x9000)
-#define IXP4XX_EthC_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xA000)
-#define IXP4XX_USB_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xB000)
-/* ixp46X only */
-#define IXP4XX_EthA_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xC000)
-#define IXP4XX_EthB1_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xD000)
-#define IXP4XX_EthB2_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xE000)
-#define IXP4XX_EthB3_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xF000)
-#define IXP4XX_TIMESYNC_BASE_PHYS	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x10000)
-#define IXP4XX_I2C_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x11000)
-#define IXP4XX_SSP_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x12000)
-
-
-/* The UART is explicitly put in the beginning of fixmap */
-#define IXP4XX_UART1_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x0000)
-#define IXP4XX_UART2_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x1000)
-#define IXP4XX_PMU_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x2000)
-#define IXP4XX_INTC_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x3000)
-#define IXP4XX_GPIO_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x4000)
-#define IXP4XX_TIMER_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x5000)
-#define IXP4XX_EthB_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x9000)
-#define IXP4XX_EthC_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xA000)
-#define IXP4XX_USB_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xB000)
-/* ixp46X only */
-#define IXP4XX_EthA_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xC000)
-#define IXP4XX_EthB1_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xD000)
-#define IXP4XX_EthB2_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xE000)
-#define IXP4XX_EthB3_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xF000)
-#define IXP4XX_TIMESYNC_BASE_VIRT	(IXP4XX_PERIPHERAL_BASE_VIRT + 0x10000)
-#define IXP4XX_I2C_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x11000)
-#define IXP4XX_SSP_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x12000)
-
-/*
- * Constants to make it easy to access Timer Control/Status registers
- */
-#define IXP4XX_OSTS_OFFSET	0x00  /* Continious TimeStamp */
-#define IXP4XX_OST1_OFFSET	0x04  /* Timer 1 Timestamp */
-#define IXP4XX_OSRT1_OFFSET	0x08  /* Timer 1 Reload */
-#define IXP4XX_OST2_OFFSET	0x0C  /* Timer 2 Timestamp */
-#define IXP4XX_OSRT2_OFFSET	0x10  /* Timer 2 Reload */
-#define IXP4XX_OSWT_OFFSET	0x14  /* Watchdog Timer */
-#define IXP4XX_OSWE_OFFSET	0x18  /* Watchdog Enable */
-#define IXP4XX_OSWK_OFFSET	0x1C  /* Watchdog Key */
-#define IXP4XX_OSST_OFFSET	0x20  /* Timer Status */
-
-/*
- * Operating System Timer Register Definitions.
- */
-
-#define IXP4XX_TIMER_REG(x) ((volatile u32 *)(IXP4XX_TIMER_BASE_VIRT+(x)))
-
-#define IXP4XX_OSTS	IXP4XX_TIMER_REG(IXP4XX_OSTS_OFFSET)
-#define IXP4XX_OST1	IXP4XX_TIMER_REG(IXP4XX_OST1_OFFSET)
-#define IXP4XX_OSRT1	IXP4XX_TIMER_REG(IXP4XX_OSRT1_OFFSET)
-#define IXP4XX_OST2	IXP4XX_TIMER_REG(IXP4XX_OST2_OFFSET)
-#define IXP4XX_OSRT2	IXP4XX_TIMER_REG(IXP4XX_OSRT2_OFFSET)
-#define IXP4XX_OSWT	IXP4XX_TIMER_REG(IXP4XX_OSWT_OFFSET)
-#define IXP4XX_OSWE	IXP4XX_TIMER_REG(IXP4XX_OSWE_OFFSET)
-#define IXP4XX_OSWK	IXP4XX_TIMER_REG(IXP4XX_OSWK_OFFSET)
-#define IXP4XX_OSST	IXP4XX_TIMER_REG(IXP4XX_OSST_OFFSET)
-
-/*
- * Timer register values and bit definitions 
- */
-#define IXP4XX_OST_ENABLE		0x00000001
-#define IXP4XX_OST_ONE_SHOT		0x00000002
-/* Low order bits of reload value ignored */
-#define IXP4XX_OST_RELOAD_MASK		0x00000003
-#define IXP4XX_OST_DISABLED		0x00000000
-#define IXP4XX_OSST_TIMER_1_PEND	0x00000001
-#define IXP4XX_OSST_TIMER_2_PEND	0x00000002
-#define IXP4XX_OSST_TIMER_TS_PEND	0x00000004
-#define IXP4XX_OSST_TIMER_WDOG_PEND	0x00000008
-#define IXP4XX_OSST_TIMER_WARM_RESET	0x00000010
-
-#define	IXP4XX_WDT_KEY			0x0000482E
-
-#define	IXP4XX_WDT_RESET_ENABLE		0x00000001
-#define	IXP4XX_WDT_IRQ_ENABLE		0x00000002
-#define	IXP4XX_WDT_COUNT_ENABLE		0x00000004
-
-
-/*
- * Constants to make it easy to access PCI Control/Status registers
- */
-#define PCI_NP_AD_OFFSET            0x00
-#define PCI_NP_CBE_OFFSET           0x04
-#define PCI_NP_WDATA_OFFSET         0x08
-#define PCI_NP_RDATA_OFFSET         0x0c
-#define PCI_CRP_AD_CBE_OFFSET       0x10
-#define PCI_CRP_WDATA_OFFSET        0x14
-#define PCI_CRP_RDATA_OFFSET        0x18
-#define PCI_CSR_OFFSET              0x1c
-#define PCI_ISR_OFFSET              0x20
-#define PCI_INTEN_OFFSET            0x24
-#define PCI_DMACTRL_OFFSET          0x28
-#define PCI_AHBMEMBASE_OFFSET       0x2c
-#define PCI_AHBIOBASE_OFFSET        0x30
-#define PCI_PCIMEMBASE_OFFSET       0x34
-#define PCI_AHBDOORBELL_OFFSET      0x38
-#define PCI_PCIDOORBELL_OFFSET      0x3C
-#define PCI_ATPDMA0_AHBADDR_OFFSET  0x40
-#define PCI_ATPDMA0_PCIADDR_OFFSET  0x44
-#define PCI_ATPDMA0_LENADDR_OFFSET  0x48
-#define PCI_ATPDMA1_AHBADDR_OFFSET  0x4C
-#define PCI_ATPDMA1_PCIADDR_OFFSET  0x50
-#define PCI_ATPDMA1_LENADDR_OFFSET	0x54
-
-/*
- * PCI Control/Status Registers
- */
-#define _IXP4XX_PCI_CSR(x) ((volatile u32 *)(IXP4XX_PCI_CFG_BASE_VIRT+(x)))
-
-#define PCI_NP_AD               _IXP4XX_PCI_CSR(PCI_NP_AD_OFFSET)
-#define PCI_NP_CBE              _IXP4XX_PCI_CSR(PCI_NP_CBE_OFFSET)
-#define PCI_NP_WDATA            _IXP4XX_PCI_CSR(PCI_NP_WDATA_OFFSET)
-#define PCI_NP_RDATA            _IXP4XX_PCI_CSR(PCI_NP_RDATA_OFFSET)
-#define PCI_CRP_AD_CBE          _IXP4XX_PCI_CSR(PCI_CRP_AD_CBE_OFFSET)
-#define PCI_CRP_WDATA           _IXP4XX_PCI_CSR(PCI_CRP_WDATA_OFFSET)
-#define PCI_CRP_RDATA           _IXP4XX_PCI_CSR(PCI_CRP_RDATA_OFFSET)
-#define PCI_CSR                 _IXP4XX_PCI_CSR(PCI_CSR_OFFSET) 
-#define PCI_ISR                 _IXP4XX_PCI_CSR(PCI_ISR_OFFSET)
-#define PCI_INTEN               _IXP4XX_PCI_CSR(PCI_INTEN_OFFSET)
-#define PCI_DMACTRL             _IXP4XX_PCI_CSR(PCI_DMACTRL_OFFSET)
-#define PCI_AHBMEMBASE          _IXP4XX_PCI_CSR(PCI_AHBMEMBASE_OFFSET)
-#define PCI_AHBIOBASE           _IXP4XX_PCI_CSR(PCI_AHBIOBASE_OFFSET)
-#define PCI_PCIMEMBASE          _IXP4XX_PCI_CSR(PCI_PCIMEMBASE_OFFSET)
-#define PCI_AHBDOORBELL         _IXP4XX_PCI_CSR(PCI_AHBDOORBELL_OFFSET)
-#define PCI_PCIDOORBELL         _IXP4XX_PCI_CSR(PCI_PCIDOORBELL_OFFSET)
-#define PCI_ATPDMA0_AHBADDR     _IXP4XX_PCI_CSR(PCI_ATPDMA0_AHBADDR_OFFSET)
-#define PCI_ATPDMA0_PCIADDR     _IXP4XX_PCI_CSR(PCI_ATPDMA0_PCIADDR_OFFSET)
-#define PCI_ATPDMA0_LENADDR     _IXP4XX_PCI_CSR(PCI_ATPDMA0_LENADDR_OFFSET)
-#define PCI_ATPDMA1_AHBADDR     _IXP4XX_PCI_CSR(PCI_ATPDMA1_AHBADDR_OFFSET)
-#define PCI_ATPDMA1_PCIADDR     _IXP4XX_PCI_CSR(PCI_ATPDMA1_PCIADDR_OFFSET)
-#define PCI_ATPDMA1_LENADDR     _IXP4XX_PCI_CSR(PCI_ATPDMA1_LENADDR_OFFSET)
-
-/*
- * PCI register values and bit definitions 
- */
-
-/* CSR bit definitions */
-#define PCI_CSR_HOST    	0x00000001
-#define PCI_CSR_ARBEN   	0x00000002
-#define PCI_CSR_ADS     	0x00000004
-#define PCI_CSR_PDS     	0x00000008
-#define PCI_CSR_ABE     	0x00000010
-#define PCI_CSR_DBT     	0x00000020
-#define PCI_CSR_ASE     	0x00000100
-#define PCI_CSR_IC      	0x00008000
-
-/* ISR (Interrupt status) Register bit definitions */
-#define PCI_ISR_PSE     	0x00000001
-#define PCI_ISR_PFE     	0x00000002
-#define PCI_ISR_PPE     	0x00000004
-#define PCI_ISR_AHBE    	0x00000008
-#define PCI_ISR_APDC    	0x00000010
-#define PCI_ISR_PADC    	0x00000020
-#define PCI_ISR_ADB     	0x00000040
-#define PCI_ISR_PDB     	0x00000080
-
-/* INTEN (Interrupt Enable) Register bit definitions */
-#define PCI_INTEN_PSE   	0x00000001
-#define PCI_INTEN_PFE   	0x00000002
-#define PCI_INTEN_PPE   	0x00000004
-#define PCI_INTEN_AHBE  	0x00000008
-#define PCI_INTEN_APDC  	0x00000010
-#define PCI_INTEN_PADC  	0x00000020
-#define PCI_INTEN_ADB   	0x00000040
-#define PCI_INTEN_PDB   	0x00000080
-
-/*
- * Shift value for byte enable on NP cmd/byte enable register
- */
-#define IXP4XX_PCI_NP_CBE_BESL		4
-
-/*
- * PCI commands supported by NP access unit
- */
-#define NP_CMD_IOREAD			0x2
-#define NP_CMD_IOWRITE			0x3
-#define NP_CMD_CONFIGREAD		0xa
-#define NP_CMD_CONFIGWRITE		0xb
-#define NP_CMD_MEMREAD			0x6
-#define	NP_CMD_MEMWRITE			0x7
-
-/*
- * Constants for CRP access into local config space
- */
-#define CRP_AD_CBE_BESL         20
-#define CRP_AD_CBE_WRITE	0x00010000
-
-#define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */
-
-#endif
diff --git a/arch/arm/mach-ixp4xx/include/mach/platform.h b/arch/arm/mach-ixp4xx/include/mach/platform.h
deleted file mode 100644
index d8b4df96db08..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/platform.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-ixp4xx/include/mach/platform.h
- *
- * Constants and functions that are useful to IXP4xx platform-specific code
- * and device drivers.
- *
- * Copyright (C) 2004 MontaVista Software, Inc.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <mach/hardware.h>"
-#endif
-
-#ifndef __ASSEMBLY__
-
-#include <linux/reboot.h>
-#include <linux/platform_data/eth_ixp4xx.h>
-
-#include <asm/types.h>
-
-#ifndef	__ARMEB__
-#define	REG_OFFSET	0
-#else
-#define	REG_OFFSET	3
-#endif
-
-/*
- * Expansion bus memory regions
- */
-#define IXP4XX_EXP_BUS_BASE_PHYS	(0x50000000)
-
-/*
- * The expansion bus on the IXP4xx can be configured for either 16 or
- * 32MB windows and the CS offset for each region changes based on the
- * current configuration. This means that we cannot simply hardcode
- * each offset. ixp4xx_sys_init() looks at the expansion bus configuration
- * as setup by the bootloader to determine our window size.
- */
-extern unsigned long ixp4xx_exp_bus_size;
-
-#define	IXP4XX_EXP_BUS_BASE(region)\
-		(IXP4XX_EXP_BUS_BASE_PHYS + ((region) * ixp4xx_exp_bus_size))
-
-#define IXP4XX_EXP_BUS_END(region)\
-		(IXP4XX_EXP_BUS_BASE(region) + ixp4xx_exp_bus_size - 1)
-
-/* Those macros can be used to adjust timing and configure
- * other features for each region.
- */
-
-#define IXP4XX_EXP_BUS_RECOVERY_T(x)	(((x) & 0x0f) << 16)
-#define IXP4XX_EXP_BUS_HOLD_T(x)	(((x) & 0x03) << 20)
-#define IXP4XX_EXP_BUS_STROBE_T(x)	(((x) & 0x0f) << 22)
-#define IXP4XX_EXP_BUS_SETUP_T(x)	(((x) & 0x03) << 26)
-#define IXP4XX_EXP_BUS_ADDR_T(x)	(((x) & 0x03) << 28)
-#define IXP4XX_EXP_BUS_SIZE(x)		(((x) & 0x0f) << 10)
-#define IXP4XX_EXP_BUS_CYCLES(x)	(((x) & 0x03) << 14)
-
-#define IXP4XX_EXP_BUS_CS_EN		(1L << 31)
-#define IXP4XX_EXP_BUS_BYTE_RD16	(1L << 6)
-#define IXP4XX_EXP_BUS_HRDY_POL		(1L << 5)
-#define IXP4XX_EXP_BUS_MUX_EN		(1L << 4)
-#define IXP4XX_EXP_BUS_SPLT_EN		(1L << 3)
-#define IXP4XX_EXP_BUS_WR_EN		(1L << 1)
-#define IXP4XX_EXP_BUS_BYTE_EN		(1L << 0)
-
-#define IXP4XX_EXP_BUS_CYCLES_INTEL	0x00
-#define IXP4XX_EXP_BUS_CYCLES_MOTOROLA	0x01
-#define IXP4XX_EXP_BUS_CYCLES_HPI	0x02
-
-#define IXP4XX_FLASH_WRITABLE	(0x2)
-#define IXP4XX_FLASH_DEFAULT	(0xbcd23c40)
-#define IXP4XX_FLASH_WRITE	(0xbcd23c42)
-
-/*
- * Clock Speed Definitions.
- */
-#define IXP4XX_PERIPHERAL_BUS_CLOCK 	(66) /* 66MHzi APB BUS   */ 
-#define IXP4XX_UART_XTAL        	14745600
-
-/*
- * Frequency of clock used for primary clocksource
- */
-extern unsigned long ixp4xx_timer_freq;
-
-/*
- * Functions used by platform-level setup code
- */
-extern void ixp4xx_map_io(void);
-extern void ixp4xx_init_early(void);
-extern void ixp4xx_init_irq(void);
-extern void ixp4xx_sys_init(void);
-extern void ixp4xx_timer_init(void);
-extern void ixp4xx_restart(enum reboot_mode, const char *);
-extern void ixp4xx_pci_preinit(void);
-struct pci_sys_data;
-extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-extern struct pci_ops ixp4xx_ops;
-
-#endif // __ASSEMBLY__
-
diff --git a/arch/arm/mach-ixp4xx/include/mach/udc.h b/arch/arm/mach-ixp4xx/include/mach/udc.h
deleted file mode 100644
index 7bd8b96c8843..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/udc.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/udc.h
- *
- */
-#include <linux/platform_data/pxa2xx_udc.h>
-
-extern void ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info);
-
diff --git a/arch/arm/mach-ixp4xx/include/mach/uncompress.h b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
deleted file mode 100644
index 9e08b270cfc7..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ixp4xx/include/mach/uncompress.h 
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- */
-
-#ifndef _ARCH_UNCOMPRESS_H_
-#define _ARCH_UNCOMPRESS_H_
-
-#include "ixp4xx-regs.h"
-#include <asm/mach-types.h>
-#include <linux/serial_reg.h>
-
-#define TX_DONE (UART_LSR_TEMT|UART_LSR_THRE)
-
-volatile u32* uart_base;
-
-static inline void putc(int c)
-{
-	/* Check THRE and TEMT bits before we transmit the character.
-	 */
-	while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
-		barrier();
-
-	*uart_base = c;
-}
-
-static void flush(void)
-{
-}
-
-static __inline__ void __arch_decomp_setup(unsigned long arch_id)
-{
-	/*
-	 * Some boards are using UART2 as console
-	 */
-	if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
-	    machine_is_gateway7001() || machine_is_wg302v2() ||
-	    machine_is_devixp() || machine_is_miccpt() || machine_is_mic256())
-		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
-	else
-		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
-}
-
-/*
- * arch_id is a variable in decompress_kernel()
- */
-#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
-
-#endif
diff --git a/arch/arm/mach-ixp4xx/irqs.h b/arch/arm/mach-ixp4xx/irqs.h
deleted file mode 100644
index a3e8d6408c56..000000000000
--- a/arch/arm/mach-ixp4xx/irqs.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ixp4xx/include/mach/irqs.h 
- *
- * IRQ definitions for IXP4XX based systems
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003 MontaVista Software, Inc.
- */
-
-#ifndef _ARCH_IXP4XX_IRQS_H_
-#define _ARCH_IXP4XX_IRQS_H_
-
-#define IRQ_IXP4XX_BASE		16
-
-#define IRQ_IXP4XX_NPEA		(IRQ_IXP4XX_BASE + 0)
-#define IRQ_IXP4XX_NPEB		(IRQ_IXP4XX_BASE + 1)
-#define IRQ_IXP4XX_NPEC		(IRQ_IXP4XX_BASE + 2)
-#define IRQ_IXP4XX_QM1		(IRQ_IXP4XX_BASE + 3)
-#define IRQ_IXP4XX_QM2		(IRQ_IXP4XX_BASE + 4)
-#define IRQ_IXP4XX_TIMER1	(IRQ_IXP4XX_BASE + 5)
-#define IRQ_IXP4XX_GPIO0	(IRQ_IXP4XX_BASE + 6)
-#define IRQ_IXP4XX_GPIO1	(IRQ_IXP4XX_BASE + 7)
-#define IRQ_IXP4XX_PCI_INT	(IRQ_IXP4XX_BASE + 8)
-#define IRQ_IXP4XX_PCI_DMA1	(IRQ_IXP4XX_BASE + 9)
-#define IRQ_IXP4XX_PCI_DMA2	(IRQ_IXP4XX_BASE + 10)
-#define IRQ_IXP4XX_TIMER2	(IRQ_IXP4XX_BASE + 11)
-#define IRQ_IXP4XX_USB		(IRQ_IXP4XX_BASE + 12)
-#define IRQ_IXP4XX_UART2	(IRQ_IXP4XX_BASE + 13)
-#define IRQ_IXP4XX_TIMESTAMP	(IRQ_IXP4XX_BASE + 14)
-#define IRQ_IXP4XX_UART1	(IRQ_IXP4XX_BASE + 15)
-#define IRQ_IXP4XX_WDOG		(IRQ_IXP4XX_BASE + 16)
-#define IRQ_IXP4XX_AHB_PMU	(IRQ_IXP4XX_BASE + 17)
-#define IRQ_IXP4XX_XSCALE_PMU	(IRQ_IXP4XX_BASE + 18)
-#define IRQ_IXP4XX_GPIO2	(IRQ_IXP4XX_BASE + 19)
-#define IRQ_IXP4XX_GPIO3	(IRQ_IXP4XX_BASE + 20)
-#define IRQ_IXP4XX_GPIO4	(IRQ_IXP4XX_BASE + 21)
-#define IRQ_IXP4XX_GPIO5	(IRQ_IXP4XX_BASE + 22)
-#define IRQ_IXP4XX_GPIO6	(IRQ_IXP4XX_BASE + 23)
-#define IRQ_IXP4XX_GPIO7	(IRQ_IXP4XX_BASE + 24)
-#define IRQ_IXP4XX_GPIO8	(IRQ_IXP4XX_BASE + 25)
-#define IRQ_IXP4XX_GPIO9	(IRQ_IXP4XX_BASE + 26)
-#define IRQ_IXP4XX_GPIO10	(IRQ_IXP4XX_BASE + 27)
-#define IRQ_IXP4XX_GPIO11	(IRQ_IXP4XX_BASE + 28)
-#define IRQ_IXP4XX_GPIO12	(IRQ_IXP4XX_BASE + 29)
-#define IRQ_IXP4XX_SW_INT1	(IRQ_IXP4XX_BASE + 30)
-#define IRQ_IXP4XX_SW_INT2	(IRQ_IXP4XX_BASE + 31)
-#define IRQ_IXP4XX_USB_HOST	(IRQ_IXP4XX_BASE + 32)
-#define IRQ_IXP4XX_I2C		(IRQ_IXP4XX_BASE + 33)
-#define IRQ_IXP4XX_SSP		(IRQ_IXP4XX_BASE + 34)
-#define IRQ_IXP4XX_TSYNC	(IRQ_IXP4XX_BASE + 35)
-#define IRQ_IXP4XX_EAU_DONE	(IRQ_IXP4XX_BASE + 36)
-#define IRQ_IXP4XX_SHA_DONE	(IRQ_IXP4XX_BASE + 37)
-#define IRQ_IXP4XX_SWCP_PE	(IRQ_IXP4XX_BASE + 58)
-#define IRQ_IXP4XX_QM_PE	(IRQ_IXP4XX_BASE + 60)
-#define IRQ_IXP4XX_MCU_ECC	(IRQ_IXP4XX_BASE + 61)
-#define IRQ_IXP4XX_EXP_PE	(IRQ_IXP4XX_BASE + 62)
-
-#define _IXP4XX_GPIO_IRQ(n)	(IRQ_IXP4XX_GPIO ## n)
-#define IXP4XX_GPIO_IRQ(n)	_IXP4XX_GPIO_IRQ(n)
-
-#define	XSCALE_PMU_IRQ		(IRQ_IXP4XX_XSCALE_PMU)
-
-#endif
diff --git a/arch/arm/mach-ixp4xx/ixp4xx-of.c b/arch/arm/mach-ixp4xx/ixp4xx-of.c
index f9904716ec7f..f543e2adae0c 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx-of.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx-of.c
@@ -46,7 +46,7 @@ static void __init ixp4xx_of_map_io(void)
 }
 
 /*
- * We handle 4 differen SoC families. These compatible strings are enough
+ * We handle 4 different SoC families. These compatible strings are enough
  * to provide the core so that different boards can add their more detailed
  * specifics.
  */
diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig
index cfd39f729f8e..de69cc2dd483 100644
--- a/arch/arm/mach-keystone/Kconfig
+++ b/arch/arm/mach-keystone/Kconfig
@@ -8,7 +8,6 @@ config ARCH_KEYSTONE
 	select ARCH_HAS_RESET_CONTROLLER
 	select ARM_ERRATA_798181 if SMP
 	select COMMON_CLK_KEYSTONE
-	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ZONE_DMA if ARM_LPAE
 	select PINCTRL
 	select PM_GENERIC_DOMAINS if PM
diff --git a/arch/arm/mach-lpc18xx/Makefile.boot b/arch/arm/mach-lpc18xx/Makefile.boot
deleted file mode 100644
index cec195d4fcba..000000000000
--- a/arch/arm/mach-lpc18xx/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-# Empty file waiting for deletion once Makefile.boot isn't needed any more.
-# Patch waits for application at
-# http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=7889/1 .
diff --git a/arch/arm/mach-lpc18xx/board-dt.c b/arch/arm/mach-lpc18xx/board-dt.c
index fdcee78d1bc4..4729eb83401a 100644
--- a/arch/arm/mach-lpc18xx/board-dt.c
+++ b/arch/arm/mach-lpc18xx/board-dt.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree board file for NXP LPC18xx/43xx
  *
  * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-lpc32xx/Kconfig b/arch/arm/mach-lpc32xx/Kconfig
index ec87c65f4536..35730d3696d0 100644
--- a/arch/arm/mach-lpc32xx/Kconfig
+++ b/arch/arm/mach-lpc32xx/Kconfig
@@ -3,6 +3,7 @@
 config ARCH_LPC32XX
 	bool "NXP LPC32XX"
 	depends on ARCH_MULTI_V5
+	depends on CPU_LITTLE_ENDIAN
 	select ARM_AMBA
 	select CLKSRC_LPC32XX
 	select CPU_ARM926T
diff --git a/arch/arm/mach-lpc32xx/Makefile.boot b/arch/arm/mach-lpc32xx/Makefile.boot
deleted file mode 100644
index 37d09ddb27f8..000000000000
--- a/arch/arm/mach-lpc32xx/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-   zreladdr-y	+= 0x80008000
-params_phys-y	:= 0x80000100
-initrd_phys-y	:= 0x82000000
diff --git a/arch/arm/mach-lpc32xx/pm.c b/arch/arm/mach-lpc32xx/pm.c
index b27fa1b9f56c..2572bd89a5e8 100644
--- a/arch/arm/mach-lpc32xx/pm.c
+++ b/arch/arm/mach-lpc32xx/pm.c
@@ -1,13 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-lpc32xx/pm.c
  *
  * Original authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
  * Modified by Kevin Wells <kevin.wells@nxp.com>
  *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
+ * 2005 (c) MontaVista Software, Inc.
  */
 
 /*
diff --git a/arch/arm/mach-lpc32xx/suspend.S b/arch/arm/mach-lpc32xx/suspend.S
index 3f0a8282ef6f..a95c5e0e4038 100644
--- a/arch/arm/mach-lpc32xx/suspend.S
+++ b/arch/arm/mach-lpc32xx/suspend.S
@@ -1,13 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * arch/arm/mach-lpc32xx/suspend.S
  *
  * Original authors: Dmitry Chigirev, Vitaly Wool <source@mvista.com>
  * Modified by Kevin Wells <kevin.wells@nxp.com>
  *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
+ * 2005 (c) MontaVista Software, Inc.
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
diff --git a/arch/arm/mach-mediatek/Kconfig b/arch/arm/mach-mediatek/Kconfig
index 9e0f592d87d8..35a3430c7942 100644
--- a/arch/arm/mach-mediatek/Kconfig
+++ b/arch/arm/mach-mediatek/Kconfig
@@ -30,6 +30,7 @@ config MACH_MT7623
 config MACH_MT7629
 	bool "MediaTek MT7629 SoCs support"
 	default ARCH_MEDIATEK
+	select HAVE_ARM_ARCH_TIMER
 
 config MACH_MT8127
 	bool "MediaTek MT8127 SoCs support"
diff --git a/arch/arm/mach-meson/platsmp.c b/arch/arm/mach-meson/platsmp.c
index 4b8ad728bb42..32ac60b89fdc 100644
--- a/arch/arm/mach-meson/platsmp.c
+++ b/arch/arm/mach-meson/platsmp.c
@@ -71,6 +71,7 @@ static void __init meson_smp_prepare_cpus(const char *scu_compatible,
 	}
 
 	sram_base = of_iomap(node, 0);
+	of_node_put(node);
 	if (!sram_base) {
 		pr_err("Couldn't map SRAM registers\n");
 		return;
@@ -91,6 +92,7 @@ static void __init meson_smp_prepare_cpus(const char *scu_compatible,
 	}
 
 	scu_base = of_iomap(node, 0);
+	of_node_put(node);
 	if (!scu_base) {
 		pr_err("Couldn't map SCU registers\n");
 		return;
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index 0dd999212944..d71417d57961 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 menuconfig ARCH_MMP
 	bool "Marvell PXA168/910/MMP2/MMP3"
-	depends on ARCH_MULTI_V5 || ARCH_MULTI_V7
+	depends on (CPU_LITTLE_ENDIAN && ARCH_MULTI_V5) || ARCH_MULTI_V7
 	select GPIO_PXA
 	select GPIOLIB
 	select PINCTRL
@@ -18,6 +18,7 @@ if ATAGS
 config MACH_ASPENITE
 	bool "Marvell's PXA168 Aspenite Development Board"
 	depends on ARCH_MULTI_V5
+	depends on UNUSED_BOARD_FILES
 	select CPU_PXA168
 	help
 	  Say 'Y' here if you want to support the Marvell PXA168-based
@@ -26,6 +27,7 @@ config MACH_ASPENITE
 config MACH_ZYLONITE2
 	bool "Marvell's PXA168 Zylonite2 Development Board"
 	depends on ARCH_MULTI_V5
+	depends on UNUSED_BOARD_FILES
 	select CPU_PXA168
 	help
 	  Say 'Y' here if you want to support the Marvell PXA168-based
@@ -34,22 +36,16 @@ config MACH_ZYLONITE2
 config MACH_AVENGERS_LITE
 	bool "Marvell's PXA168 Avengers Lite Development Board"
 	depends on ARCH_MULTI_V5
+	depends on UNUSED_BOARD_FILES
 	select CPU_PXA168
 	help
 	  Say 'Y' here if you want to support the Marvell PXA168-based
 	  Avengers Lite Development Board.
 
-config MACH_TAVOREVB
-	bool "Marvell's PXA910 TavorEVB Development Board"
-	depends on ARCH_MULTI_V5
-	select CPU_PXA910
-	help
-	  Say 'Y' here if you want to support the Marvell PXA910-based
-	  TavorEVB Development Board.
-
 config MACH_TTC_DKB
-	bool "Marvell's PXA910 TavorEVB Development Board"
+	bool "Marvell's PXA910 TavorEVB/TTC_DKB Development Board"
 	depends on ARCH_MULTI_V5
+	depends on UNUSED_BOARD_FILES
 	select CPU_PXA910
 	help
 	  Say 'Y' here if you want to support the Marvell PXA910-based
@@ -58,6 +54,7 @@ config MACH_TTC_DKB
 config MACH_BROWNSTONE
 	bool "Marvell's Brownstone Development Platform"
 	depends on ARCH_MULTI_V7
+	depends on UNUSED_BOARD_FILES
 	select CPU_MMP2
 	help
 	  Say 'Y' here if you want to support the Marvell MMP2-based
@@ -69,6 +66,7 @@ config MACH_BROWNSTONE
 config MACH_FLINT
 	bool "Marvell's Flint Development Platform"
 	depends on ARCH_MULTI_V7
+	depends on UNUSED_BOARD_FILES
 	select CPU_MMP2
 	help
 	  Say 'Y' here if you want to support the Marvell MMP2-based
@@ -80,6 +78,7 @@ config MACH_FLINT
 config MACH_MARVELL_JASPER
 	bool "Marvell's Jasper Development Platform"
 	depends on ARCH_MULTI_V7
+	depends on UNUSED_BOARD_FILES
 	select CPU_MMP2
 	help
 	  Say 'Y' here if you want to support the Marvell MMP2-base
@@ -91,6 +90,7 @@ config MACH_MARVELL_JASPER
 config MACH_TETON_BGA
 	bool "Marvell's PXA168 Teton BGA Development Board"
 	depends on ARCH_MULTI_V5
+	depends on UNUSED_BOARD_FILES
 	select CPU_PXA168
 	help
 	  Say 'Y' here if you want to support the Marvell PXA168-based
@@ -99,6 +99,7 @@ config MACH_TETON_BGA
 config MACH_GPLUGD
 	bool "Marvell's PXA168 GuruPlug Display (gplugD) Board"
 	depends on ARCH_MULTI_V5
+	depends on UNUSED_BOARD_FILES
 	select CPU_PXA168
 	help
 	  Say 'Y' here if you want to support the Marvell PXA168-based
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index e3758f7e1fe7..539d750aaf10 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -2,8 +2,6 @@
 #
 # Makefile for Marvell's PXA168 processors line
 #
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-pxa/include
-
 obj-y				+= common.o devices.o time.o
 
 # SoC support
@@ -24,7 +22,6 @@ endif
 obj-$(CONFIG_MACH_ASPENITE)	+= aspenite.o
 obj-$(CONFIG_MACH_ZYLONITE2)	+= aspenite.o
 obj-$(CONFIG_MACH_AVENGERS_LITE)+= avengers_lite.o
-obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
 obj-$(CONFIG_MACH_TTC_DKB)	+= ttc_dkb.o
 obj-$(CONFIG_MACH_BROWNSTONE)	+= brownstone.o
 obj-$(CONFIG_MACH_FLINT)	+= flint.o
diff --git a/arch/arm/mach-mmp/devices.c b/arch/arm/mach-mmp/devices.c
index 18bee66a671f..9968239d8041 100644
--- a/arch/arm/mach-mmp/devices.c
+++ b/arch/arm/mach-mmp/devices.c
@@ -14,7 +14,7 @@
 #include <linux/soc/mmp/cputype.h>
 #include "regs-usb.h"
 
-int __init pxa_register_device(struct pxa_device_desc *desc,
+int __init mmp_register_device(struct mmp_device_desc *desc,
 				void *data, size_t size)
 {
 	struct platform_device *pdev;
@@ -238,7 +238,7 @@ void pxa_usb_phy_deinit(void __iomem *phy_reg)
 static u64 __maybe_unused usb_dma_mask = ~(u32)0;
 
 #if IS_ENABLED(CONFIG_PHY_PXA_USB)
-struct resource pxa168_usb_phy_resources[] = {
+static struct resource pxa168_usb_phy_resources[] = {
 	[0] = {
 		.start	= PXA168_U2O_PHYBASE,
 		.end	= PXA168_U2O_PHYBASE + USB_PHY_RANGE,
@@ -259,7 +259,7 @@ struct platform_device pxa168_device_usb_phy = {
 #endif /* CONFIG_PHY_PXA_USB */
 
 #if IS_ENABLED(CONFIG_USB_MV_UDC)
-struct resource pxa168_u2o_resources[] = {
+static struct resource pxa168_u2o_resources[] = {
 	/* regbase */
 	[0] = {
 		.start	= PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET,
@@ -294,7 +294,7 @@ struct platform_device pxa168_device_u2o = {
 #endif /* CONFIG_USB_MV_UDC */
 
 #if IS_ENABLED(CONFIG_USB_EHCI_MV_U2O)
-struct resource pxa168_u2oehci_resources[] = {
+static struct resource pxa168_u2oehci_resources[] = {
 	[0] = {
 		.start	= PXA168_U2O_REGBASE,
 		.end	= PXA168_U2O_REGBASE + USB_REG_RANGE,
@@ -321,7 +321,7 @@ struct platform_device pxa168_device_u2oehci = {
 #endif
 
 #if IS_ENABLED(CONFIG_USB_MV_OTG)
-struct resource pxa168_u2ootg_resources[] = {
+static struct resource pxa168_u2ootg_resources[] = {
 	/* regbase */
 	[0] = {
 		.start	= PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET,
diff --git a/arch/arm/mach-mmp/devices.h b/arch/arm/mach-mmp/devices.h
index 4df596c5c201..d4920ebfebc5 100644
--- a/arch/arm/mach-mmp/devices.h
+++ b/arch/arm/mach-mmp/devices.h
@@ -7,7 +7,7 @@
 #define MAX_RESOURCE_DMA	2
 
 /* structure for describing the on-chip devices */
-struct pxa_device_desc {
+struct mmp_device_desc {
 	const char	*dev_name;
 	const char	*drv_name;
 	int		id;
@@ -18,7 +18,7 @@ struct pxa_device_desc {
 };
 
 #define PXA168_DEVICE(_name, _drv, _id, _irq, _start, _size, _dma...)	\
-struct pxa_device_desc pxa168_device_##_name __initdata = {		\
+struct mmp_device_desc pxa168_device_##_name __initdata = {		\
 	.dev_name	= "pxa168-" #_name,				\
 	.drv_name	= _drv,						\
 	.id		= _id,						\
@@ -29,7 +29,7 @@ struct pxa_device_desc pxa168_device_##_name __initdata = {		\
 };
 
 #define PXA910_DEVICE(_name, _drv, _id, _irq, _start, _size, _dma...)	\
-struct pxa_device_desc pxa910_device_##_name __initdata = {		\
+struct mmp_device_desc pxa910_device_##_name __initdata = {		\
 	.dev_name	= "pxa910-" #_name,				\
 	.drv_name	= _drv,						\
 	.id		= _id,						\
@@ -40,7 +40,7 @@ struct pxa_device_desc pxa910_device_##_name __initdata = {		\
 };
 
 #define MMP2_DEVICE(_name, _drv, _id, _irq, _start, _size, _dma...)	\
-struct pxa_device_desc mmp2_device_##_name __initdata = {		\
+struct mmp_device_desc mmp2_device_##_name __initdata = {		\
 	.dev_name	= "mmp2-" #_name,				\
 	.drv_name	= _drv,						\
 	.id		= _id,						\
@@ -50,7 +50,7 @@ struct pxa_device_desc mmp2_device_##_name __initdata = {		\
 	.dma		= { _dma },					\
 }
 
-extern int pxa_register_device(struct pxa_device_desc *, void *, size_t);
+extern int mmp_register_device(struct mmp_device_desc *, void *, size_t);
 extern int pxa_usb_phy_init(void __iomem *phy_reg);
 extern void pxa_usb_phy_deinit(void __iomem *phy_reg);
 
diff --git a/arch/arm/mach-mmp/mfp.h b/arch/arm/mach-mmp/mfp.h
index 75a4acb33b1b..6f3057987756 100644
--- a/arch/arm/mach-mmp/mfp.h
+++ b/arch/arm/mach-mmp/mfp.h
@@ -2,7 +2,7 @@
 #ifndef __ASM_MACH_MFP_H
 #define __ASM_MACH_MFP_H
 
-#include <plat/mfp.h>
+#include <linux/soc/pxa/mfp.h>
 
 /*
  * NOTE: the MFPR register bit definitions on PXA168 processor lines are a
diff --git a/arch/arm/mach-mmp/mmp2.h b/arch/arm/mach-mmp/mmp2.h
index adafc4fba8f4..7f80b90248fb 100644
--- a/arch/arm/mach-mmp/mmp2.h
+++ b/arch/arm/mach-mmp/mmp2.h
@@ -5,38 +5,38 @@
 #include <linux/platform_data/pxa_sdhci.h>
 
 extern void mmp2_timer_init(void);
-extern void __init mmp2_init_icu(void);
 extern void __init mmp2_init_irq(void);
 extern void mmp2_clear_pmic_int(void);
 
 #include <linux/i2c.h>
 #include <linux/platform_data/i2c-pxa.h>
 #include <linux/platform_data/dma-mmp_tdma.h>
+#include <linux/irqchip/mmp.h>
 
 #include "devices.h"
 
-extern struct pxa_device_desc mmp2_device_uart1;
-extern struct pxa_device_desc mmp2_device_uart2;
-extern struct pxa_device_desc mmp2_device_uart3;
-extern struct pxa_device_desc mmp2_device_uart4;
-extern struct pxa_device_desc mmp2_device_twsi1;
-extern struct pxa_device_desc mmp2_device_twsi2;
-extern struct pxa_device_desc mmp2_device_twsi3;
-extern struct pxa_device_desc mmp2_device_twsi4;
-extern struct pxa_device_desc mmp2_device_twsi5;
-extern struct pxa_device_desc mmp2_device_twsi6;
-extern struct pxa_device_desc mmp2_device_sdh0;
-extern struct pxa_device_desc mmp2_device_sdh1;
-extern struct pxa_device_desc mmp2_device_sdh2;
-extern struct pxa_device_desc mmp2_device_sdh3;
-extern struct pxa_device_desc mmp2_device_asram;
-extern struct pxa_device_desc mmp2_device_isram;
+extern struct mmp_device_desc mmp2_device_uart1;
+extern struct mmp_device_desc mmp2_device_uart2;
+extern struct mmp_device_desc mmp2_device_uart3;
+extern struct mmp_device_desc mmp2_device_uart4;
+extern struct mmp_device_desc mmp2_device_twsi1;
+extern struct mmp_device_desc mmp2_device_twsi2;
+extern struct mmp_device_desc mmp2_device_twsi3;
+extern struct mmp_device_desc mmp2_device_twsi4;
+extern struct mmp_device_desc mmp2_device_twsi5;
+extern struct mmp_device_desc mmp2_device_twsi6;
+extern struct mmp_device_desc mmp2_device_sdh0;
+extern struct mmp_device_desc mmp2_device_sdh1;
+extern struct mmp_device_desc mmp2_device_sdh2;
+extern struct mmp_device_desc mmp2_device_sdh3;
+extern struct mmp_device_desc mmp2_device_asram;
+extern struct mmp_device_desc mmp2_device_isram;
 
 extern struct platform_device mmp2_device_gpio;
 
 static inline int mmp2_add_uart(int id)
 {
-	struct pxa_device_desc *d = NULL;
+	struct mmp_device_desc *d = NULL;
 
 	switch (id) {
 	case 1: d = &mmp2_device_uart1; break;
@@ -47,13 +47,13 @@ static inline int mmp2_add_uart(int id)
 		return -EINVAL;
 	}
 
-	return pxa_register_device(d, NULL, 0);
+	return mmp_register_device(d, NULL, 0);
 }
 
 static inline int mmp2_add_twsi(int id, struct i2c_pxa_platform_data *data,
 				  struct i2c_board_info *info, unsigned size)
 {
-	struct pxa_device_desc *d = NULL;
+	struct mmp_device_desc *d = NULL;
 	int ret;
 
 	switch (id) {
@@ -71,12 +71,12 @@ static inline int mmp2_add_twsi(int id, struct i2c_pxa_platform_data *data,
 	if (ret)
 		return ret;
 
-	return pxa_register_device(d, data, sizeof(*data));
+	return mmp_register_device(d, data, sizeof(*data));
 }
 
 static inline int mmp2_add_sdhost(int id, struct sdhci_pxa_platdata *data)
 {
-	struct pxa_device_desc *d = NULL;
+	struct mmp_device_desc *d = NULL;
 
 	switch (id) {
 	case 0: d = &mmp2_device_sdh0; break;
@@ -87,17 +87,17 @@ static inline int mmp2_add_sdhost(int id, struct sdhci_pxa_platdata *data)
 		return -EINVAL;
 	}
 
-	return pxa_register_device(d, data, sizeof(*data));
+	return mmp_register_device(d, data, sizeof(*data));
 }
 
 static inline int mmp2_add_asram(struct sram_platdata *data)
 {
-	return pxa_register_device(&mmp2_device_asram, data, sizeof(*data));
+	return mmp_register_device(&mmp2_device_asram, data, sizeof(*data));
 }
 
 static inline int mmp2_add_isram(struct sram_platdata *data)
 {
-	return pxa_register_device(&mmp2_device_isram, data, sizeof(*data));
+	return mmp_register_device(&mmp2_device_isram, data, sizeof(*data));
 }
 
 #endif /* __ASM_MACH_MMP2_H */
diff --git a/arch/arm/mach-mmp/pxa168.h b/arch/arm/mach-mmp/pxa168.h
index dff651b9f252..c1547e098f09 100644
--- a/arch/arm/mach-mmp/pxa168.h
+++ b/arch/arm/mach-mmp/pxa168.h
@@ -5,7 +5,6 @@
 #include <linux/reboot.h>
 
 extern void pxa168_timer_init(void);
-extern void __init icu_init_irq(void);
 extern void __init pxa168_init_irq(void);
 extern void pxa168_restart(enum reboot_mode, const char *);
 extern void pxa168_clear_keypad_wakeup(void);
@@ -18,27 +17,28 @@ extern void pxa168_clear_keypad_wakeup(void);
 #include <linux/pxa168_eth.h>
 #include <linux/platform_data/mv_usb.h>
 #include <linux/soc/mmp/cputype.h>
+#include <linux/irqchip/mmp.h>
 
 #include "devices.h"
 
-extern struct pxa_device_desc pxa168_device_uart1;
-extern struct pxa_device_desc pxa168_device_uart2;
-extern struct pxa_device_desc pxa168_device_uart3;
-extern struct pxa_device_desc pxa168_device_twsi0;
-extern struct pxa_device_desc pxa168_device_twsi1;
-extern struct pxa_device_desc pxa168_device_pwm1;
-extern struct pxa_device_desc pxa168_device_pwm2;
-extern struct pxa_device_desc pxa168_device_pwm3;
-extern struct pxa_device_desc pxa168_device_pwm4;
-extern struct pxa_device_desc pxa168_device_ssp1;
-extern struct pxa_device_desc pxa168_device_ssp2;
-extern struct pxa_device_desc pxa168_device_ssp3;
-extern struct pxa_device_desc pxa168_device_ssp4;
-extern struct pxa_device_desc pxa168_device_ssp5;
-extern struct pxa_device_desc pxa168_device_nand;
-extern struct pxa_device_desc pxa168_device_fb;
-extern struct pxa_device_desc pxa168_device_keypad;
-extern struct pxa_device_desc pxa168_device_eth;
+extern struct mmp_device_desc pxa168_device_uart1;
+extern struct mmp_device_desc pxa168_device_uart2;
+extern struct mmp_device_desc pxa168_device_uart3;
+extern struct mmp_device_desc pxa168_device_twsi0;
+extern struct mmp_device_desc pxa168_device_twsi1;
+extern struct mmp_device_desc pxa168_device_pwm1;
+extern struct mmp_device_desc pxa168_device_pwm2;
+extern struct mmp_device_desc pxa168_device_pwm3;
+extern struct mmp_device_desc pxa168_device_pwm4;
+extern struct mmp_device_desc pxa168_device_ssp1;
+extern struct mmp_device_desc pxa168_device_ssp2;
+extern struct mmp_device_desc pxa168_device_ssp3;
+extern struct mmp_device_desc pxa168_device_ssp4;
+extern struct mmp_device_desc pxa168_device_ssp5;
+extern struct mmp_device_desc pxa168_device_nand;
+extern struct mmp_device_desc pxa168_device_fb;
+extern struct mmp_device_desc pxa168_device_keypad;
+extern struct mmp_device_desc pxa168_device_eth;
 
 /* pdata can be NULL */
 extern int __init pxa168_add_usb_host(struct mv_usb_platform_data *pdata);
@@ -48,7 +48,7 @@ extern struct platform_device pxa168_device_gpio;
 
 static inline int pxa168_add_uart(int id)
 {
-	struct pxa_device_desc *d = NULL;
+	struct mmp_device_desc *d = NULL;
 
 	switch (id) {
 	case 1: d = &pxa168_device_uart1; break;
@@ -59,13 +59,13 @@ static inline int pxa168_add_uart(int id)
 	if (d == NULL)
 		return -EINVAL;
 
-	return pxa_register_device(d, NULL, 0);
+	return mmp_register_device(d, NULL, 0);
 }
 
 static inline int pxa168_add_twsi(int id, struct i2c_pxa_platform_data *data,
 				  struct i2c_board_info *info, unsigned size)
 {
-	struct pxa_device_desc *d = NULL;
+	struct mmp_device_desc *d = NULL;
 	int ret;
 
 	switch (id) {
@@ -79,12 +79,12 @@ static inline int pxa168_add_twsi(int id, struct i2c_pxa_platform_data *data,
 	if (ret)
 		return ret;
 
-	return pxa_register_device(d, data, sizeof(*data));
+	return mmp_register_device(d, data, sizeof(*data));
 }
 
 static inline int pxa168_add_pwm(int id)
 {
-	struct pxa_device_desc *d = NULL;
+	struct mmp_device_desc *d = NULL;
 
 	switch (id) {
 	case 1: d = &pxa168_device_pwm1; break;
@@ -95,12 +95,12 @@ static inline int pxa168_add_pwm(int id)
 		return -EINVAL;
 	}
 
-	return pxa_register_device(d, NULL, 0);
+	return mmp_register_device(d, NULL, 0);
 }
 
 static inline int pxa168_add_ssp(int id)
 {
-	struct pxa_device_desc *d = NULL;
+	struct mmp_device_desc *d = NULL;
 
 	switch (id) {
 	case 1: d = &pxa168_device_ssp1; break;
@@ -111,17 +111,17 @@ static inline int pxa168_add_ssp(int id)
 	default:
 		return -EINVAL;
 	}
-	return pxa_register_device(d, NULL, 0);
+	return mmp_register_device(d, NULL, 0);
 }
 
 static inline int pxa168_add_nand(struct pxa3xx_nand_platform_data *info)
 {
-	return pxa_register_device(&pxa168_device_nand, info, sizeof(*info));
+	return mmp_register_device(&pxa168_device_nand, info, sizeof(*info));
 }
 
 static inline int pxa168_add_fb(struct pxa168fb_mach_info *mi)
 {
-	return pxa_register_device(&pxa168_device_fb, mi, sizeof(*mi));
+	return mmp_register_device(&pxa168_device_fb, mi, sizeof(*mi));
 }
 
 static inline int pxa168_add_keypad(struct pxa27x_keypad_platform_data *data)
@@ -129,11 +129,11 @@ static inline int pxa168_add_keypad(struct pxa27x_keypad_platform_data *data)
 	if (cpu_is_pxa168())
 		data->clear_wakeup_event = pxa168_clear_keypad_wakeup;
 
-	return pxa_register_device(&pxa168_device_keypad, data, sizeof(*data));
+	return mmp_register_device(&pxa168_device_keypad, data, sizeof(*data));
 }
 
 static inline int pxa168_add_eth(struct pxa168_eth_platform_data *data)
 {
-	return pxa_register_device(&pxa168_device_eth, data, sizeof(*data));
+	return mmp_register_device(&pxa168_device_eth, data, sizeof(*data));
 }
 #endif /* __ASM_MACH_PXA168_H */
diff --git a/arch/arm/mach-mmp/pxa910.h b/arch/arm/mach-mmp/pxa910.h
index 2dfe38e4acc1..7d229214065a 100644
--- a/arch/arm/mach-mmp/pxa910.h
+++ b/arch/arm/mach-mmp/pxa910.h
@@ -3,38 +3,38 @@
 #define __ASM_MACH_PXA910_H
 
 extern void pxa910_timer_init(void);
-extern void __init icu_init_irq(void);
 extern void __init pxa910_init_irq(void);
 
 #include <linux/i2c.h>
 #include <linux/platform_data/i2c-pxa.h>
 #include <linux/platform_data/mtd-nand-pxa3xx.h>
 #include <video/mmp_disp.h>
+#include <linux/irqchip/mmp.h>
 
 #include "devices.h"
 
-extern struct pxa_device_desc pxa910_device_uart1;
-extern struct pxa_device_desc pxa910_device_uart2;
-extern struct pxa_device_desc pxa910_device_twsi0;
-extern struct pxa_device_desc pxa910_device_twsi1;
-extern struct pxa_device_desc pxa910_device_pwm1;
-extern struct pxa_device_desc pxa910_device_pwm2;
-extern struct pxa_device_desc pxa910_device_pwm3;
-extern struct pxa_device_desc pxa910_device_pwm4;
-extern struct pxa_device_desc pxa910_device_nand;
+extern struct mmp_device_desc pxa910_device_uart1;
+extern struct mmp_device_desc pxa910_device_uart2;
+extern struct mmp_device_desc pxa910_device_twsi0;
+extern struct mmp_device_desc pxa910_device_twsi1;
+extern struct mmp_device_desc pxa910_device_pwm1;
+extern struct mmp_device_desc pxa910_device_pwm2;
+extern struct mmp_device_desc pxa910_device_pwm3;
+extern struct mmp_device_desc pxa910_device_pwm4;
+extern struct mmp_device_desc pxa910_device_nand;
 extern struct platform_device pxa168_device_usb_phy;
 extern struct platform_device pxa168_device_u2o;
 extern struct platform_device pxa168_device_u2ootg;
 extern struct platform_device pxa168_device_u2oehci;
-extern struct pxa_device_desc pxa910_device_disp;
-extern struct pxa_device_desc pxa910_device_fb;
-extern struct pxa_device_desc pxa910_device_panel;
+extern struct mmp_device_desc pxa910_device_disp;
+extern struct mmp_device_desc pxa910_device_fb;
+extern struct mmp_device_desc pxa910_device_panel;
 extern struct platform_device pxa910_device_gpio;
 extern struct platform_device pxa910_device_rtc;
 
 static inline int pxa910_add_uart(int id)
 {
-	struct pxa_device_desc *d = NULL;
+	struct mmp_device_desc *d = NULL;
 
 	switch (id) {
 	case 1: d = &pxa910_device_uart1; break;
@@ -44,13 +44,13 @@ static inline int pxa910_add_uart(int id)
 	if (d == NULL)
 		return -EINVAL;
 
-	return pxa_register_device(d, NULL, 0);
+	return mmp_register_device(d, NULL, 0);
 }
 
 static inline int pxa910_add_twsi(int id, struct i2c_pxa_platform_data *data,
 				  struct i2c_board_info *info, unsigned size)
 {
-	struct pxa_device_desc *d = NULL;
+	struct mmp_device_desc *d = NULL;
 	int ret;
 
 	switch (id) {
@@ -64,12 +64,12 @@ static inline int pxa910_add_twsi(int id, struct i2c_pxa_platform_data *data,
 	if (ret)
 		return ret;
 
-	return pxa_register_device(d, data, sizeof(*data));
+	return mmp_register_device(d, data, sizeof(*data));
 }
 
 static inline int pxa910_add_pwm(int id)
 {
-	struct pxa_device_desc *d = NULL;
+	struct mmp_device_desc *d = NULL;
 
 	switch (id) {
 	case 1: d = &pxa910_device_pwm1; break;
@@ -80,11 +80,11 @@ static inline int pxa910_add_pwm(int id)
 		return -EINVAL;
 	}
 
-	return pxa_register_device(d, NULL, 0);
+	return mmp_register_device(d, NULL, 0);
 }
 
 static inline int pxa910_add_nand(struct pxa3xx_nand_platform_data *info)
 {
-	return pxa_register_device(&pxa910_device_nand, info, sizeof(*info));
+	return mmp_register_device(&pxa910_device_nand, info, sizeof(*info));
 }
 #endif /* __ASM_MACH_PXA910_H */
diff --git a/arch/arm/mach-mmp/sram.c b/arch/arm/mach-mmp/sram.c
index 6794e2db1ad5..ecc46c31004f 100644
--- a/arch/arm/mach-mmp/sram.c
+++ b/arch/arm/mach-mmp/sram.c
@@ -72,6 +72,8 @@ static int sram_probe(struct platform_device *pdev)
 	if (!info)
 		return -ENOMEM;
 
+	platform_set_drvdata(pdev, info);
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (res == NULL) {
 		dev_err(&pdev->dev, "no memory resource defined\n");
@@ -107,8 +109,6 @@ static int sram_probe(struct platform_device *pdev)
 	list_add(&info->node, &sram_bank_list);
 	mutex_unlock(&sram_lock);
 
-	platform_set_drvdata(pdev, info);
-
 	dev_info(&pdev->dev, "initialized\n");
 	return 0;
 
@@ -127,17 +127,19 @@ static int sram_remove(struct platform_device *pdev)
 	struct sram_bank_info *info;
 
 	info = platform_get_drvdata(pdev);
-	if (info == NULL)
-		return -ENODEV;
 
-	mutex_lock(&sram_lock);
-	list_del(&info->node);
-	mutex_unlock(&sram_lock);
+	if (info->sram_size) {
+		mutex_lock(&sram_lock);
+		list_del(&info->node);
+		mutex_unlock(&sram_lock);
+
+		gen_pool_destroy(info->gpool);
+		iounmap(info->sram_virt);
+		kfree(info->pool_name);
+	}
 
-	gen_pool_destroy(info->gpool);
-	iounmap(info->sram_virt);
-	kfree(info->pool_name);
 	kfree(info);
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c
deleted file mode 100644
index 3261d2322198..000000000000
--- a/arch/arm/mach-mmp/tavorevb.c
+++ /dev/null
@@ -1,113 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/tavorevb.c
- *
- *  Support for the Marvell PXA910-based TavorEVB Development Platform.
- */
-#include <linux/gpio.h>
-#include <linux/gpio-pxa.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/smc91x.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "addr-map.h"
-#include "mfp-pxa910.h"
-#include "pxa910.h"
-#include "irqs.h"
-
-#include "common.h"
-
-static unsigned long tavorevb_pin_config[] __initdata = {
-	/* UART2 */
-	GPIO47_UART2_RXD,
-	GPIO48_UART2_TXD,
-
-	/* SMC */
-	SM_nCS0_nCS0,
-	SM_ADV_SM_ADV,
-	SM_SCLK_SM_SCLK,
-	SM_SCLK_SM_SCLK,
-	SM_BE0_SM_BE0,
-	SM_BE1_SM_BE1,
-
-	/* DFI */
-	DF_IO0_ND_IO0,
-	DF_IO1_ND_IO1,
-	DF_IO2_ND_IO2,
-	DF_IO3_ND_IO3,
-	DF_IO4_ND_IO4,
-	DF_IO5_ND_IO5,
-	DF_IO6_ND_IO6,
-	DF_IO7_ND_IO7,
-	DF_IO8_ND_IO8,
-	DF_IO9_ND_IO9,
-	DF_IO10_ND_IO10,
-	DF_IO11_ND_IO11,
-	DF_IO12_ND_IO12,
-	DF_IO13_ND_IO13,
-	DF_IO14_ND_IO14,
-	DF_IO15_ND_IO15,
-	DF_nCS0_SM_nCS2_nCS0,
-	DF_ALE_SM_WEn_ND_ALE,
-	DF_CLE_SM_OEn_ND_CLE,
-	DF_WEn_DF_WEn,
-	DF_REn_DF_REn,
-	DF_RDY0_DF_RDY0,
-};
-
-static struct pxa_gpio_platform_data pxa910_gpio_pdata = {
-	.irq_base	= MMP_GPIO_TO_IRQ(0),
-};
-
-static struct smc91x_platdata tavorevb_smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= SMC_CS1_PHYS_BASE + 0x300,
-		.end	= SMC_CS1_PHYS_BASE + 0xfffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= MMP_GPIO_TO_IRQ(80),
-		.end	= MMP_GPIO_TO_IRQ(80),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &tavorevb_smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static void __init tavorevb_init(void)
-{
-	mfp_config(ARRAY_AND_SIZE(tavorevb_pin_config));
-
-	/* on-chip devices */
-	pxa910_add_uart(1);
-	platform_device_add_data(&pxa910_device_gpio, &pxa910_gpio_pdata,
-				 sizeof(struct pxa_gpio_platform_data));
-	platform_device_register(&pxa910_device_gpio);
-
-	/* off-chip devices */
-	platform_device_register(&smc91x_device);
-}
-
-MACHINE_START(TAVOREVB, "PXA910 Evaluation Board (aka TavorEVB)")
-	.map_io		= mmp_map_io,
-	.nr_irqs	= MMP_NR_IRQS,
-	.init_irq       = pxa910_init_irq,
-	.init_time	= pxa910_timer_init,
-	.init_machine   = tavorevb_init,
-	.restart	= mmp_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index 4f240760d4aa..345b2e6d5c7e 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -253,12 +253,12 @@ static struct spi_board_info spi_board_info[] __initdata = {
 
 static void __init add_disp(void)
 {
-	pxa_register_device(&pxa910_device_disp,
+	mmp_register_device(&pxa910_device_disp,
 		&dkb_disp_info, sizeof(dkb_disp_info));
 	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-	pxa_register_device(&pxa910_device_fb,
+	mmp_register_device(&pxa910_device_fb,
 		&dkb_fb_info, sizeof(dkb_fb_info));
-	pxa_register_device(&pxa910_device_panel,
+	mmp_register_device(&pxa910_device_panel,
 		&dkb_tpo_panel_info, sizeof(dkb_tpo_panel_info));
 }
 #endif
diff --git a/arch/arm/mach-moxart/Kconfig b/arch/arm/mach-moxart/Kconfig
index 31ada63ba51b..909c6573ba8b 100644
--- a/arch/arm/mach-moxart/Kconfig
+++ b/arch/arm/mach-moxart/Kconfig
@@ -2,6 +2,7 @@
 menuconfig ARCH_MOXART
 	bool "MOXA ART SoC"
 	depends on ARCH_MULTI_V4
+	depends on CPU_LITTLE_ENDIAN
 	select CPU_FA526
 	select ARM_DMA_MEM_BUFFERABLE
 	select FARADAY_FTINTC010
diff --git a/arch/arm/mach-mstar/Kconfig b/arch/arm/mach-mstar/Kconfig
index cd300eeedc20..5dbea7b485af 100644
--- a/arch/arm/mach-mstar/Kconfig
+++ b/arch/arm/mach-mstar/Kconfig
@@ -1,8 +1,10 @@
 menuconfig ARCH_MSTARV7
 	bool "MStar/Sigmastar Armv7 SoC Support"
 	depends on ARCH_MULTI_V7
+	select ARM_ERRATA_814220
 	select ARM_GIC
 	select ARM_HEAVY_MB
+	select HAVE_ARM_ARCH_TIMER
 	select MST_IRQ
 	select MSTAR_MSC313_MPLL
 	help
diff --git a/arch/arm/mach-mv78xx0/Kconfig b/arch/arm/mach-mv78xx0/Kconfig
index ea52c7fabb79..da92f94494cc 100644
--- a/arch/arm/mach-mv78xx0/Kconfig
+++ b/arch/arm/mach-mv78xx0/Kconfig
@@ -2,6 +2,8 @@
 menuconfig ARCH_MV78XX0
 	bool "Marvell MV78xx0"
 	depends on ARCH_MULTI_V5
+	depends on CPU_LITTLE_ENDIAN
+	depends on ATAGS && UNUSED_BOARD_FILES
 	select CPU_FEROCEON
 	select GPIOLIB
 	select MVEBU_MBUS
diff --git a/arch/arm/mach-mv78xx0/Makefile b/arch/arm/mach-mv78xx0/Makefile
index a839e960b8c6..50aff70065f2 100644
--- a/arch/arm/mach-mv78xx0/Makefile
+++ b/arch/arm/mach-mv78xx0/Makefile
@@ -1,5 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-orion/include
+ccflags-y := -I$(srctree)/arch/arm/plat-orion/include
 
 obj-y				+= common.o mpp.o irq.o pcie.o
 obj-$(CONFIG_MACH_DB78X00_BP)	+= db78x00-bp-setup.o
diff --git a/arch/arm/mach-mv78xx0/bridge-regs.h b/arch/arm/mach-mv78xx0/bridge-regs.h
index 2f54e1753d45..d57ac967c4b3 100644
--- a/arch/arm/mach-mv78xx0/bridge-regs.h
+++ b/arch/arm/mach-mv78xx0/bridge-regs.h
@@ -1,8 +1,4 @@
-/*
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
+/* SPDX-License-Identifier: GPL-2.0-only */
 
 #ifndef __ASM_ARCH_BRIDGE_REGS_H
 #define __ASM_ARCH_BRIDGE_REGS_H
diff --git a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
index e112f2e7cc9a..9aa765d4cdc8 100644
--- a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
+++ b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
  *
  * Buffalo WXL (Terastation Duo) Setup routines
  *
  * sebastien requiem <sebastien@requiem.fr>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index dd762d1b083f..461a68945c26 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-mv78xx0/common.c
  *
  * Core functions for Marvell MV78xx0 SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-mv78xx0/common.h b/arch/arm/mach-mv78xx0/common.h
index 6889af26077d..d8c6c2400e27 100644
--- a/arch/arm/mach-mv78xx0/common.h
+++ b/arch/arm/mach-mv78xx0/common.h
@@ -1,11 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * arch/arm/mach-mv78xx0/common.h
  *
  * Core functions for Marvell MV78xx0 SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #ifndef __ARCH_MV78XX0_COMMON_H
diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
index cf16e08d4cf5..da633a33a0c1 100644
--- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
+++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-mv78xx0/db78x00-bp-setup.c
  *
  * Marvell DB-78x00-BP Development Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c
index 788569e960e1..a34b6855fb19 100644
--- a/arch/arm/mach-mv78xx0/irq.c
+++ b/arch/arm/mach-mv78xx0/irq.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-mv78xx0/irq.c
  *
  * MV78xx0 IRQ handling.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 #include <linux/gpio.h>
 #include <linux/kernel.h>
@@ -67,7 +64,6 @@ void __init mv78xx0_init_irq(void)
 	 * registers for core #1 are at an offset of 0x18 from those of
 	 * core #0.)
 	 */
-	orion_gpio_init(NULL, 0, 32, GPIO_VIRT_BASE,
-			mv78xx0_core_index() ? 0x18 : 0,
+	orion_gpio_init(0, 32, GPIO_VIRT_BASE, mv78xx0_core_index() ? 0x18 : 0,
 			IRQ_MV78XX0_GPIO_START, gpio0_irqs);
 }
diff --git a/arch/arm/mach-mv78xx0/irqs.h b/arch/arm/mach-mv78xx0/irqs.h
index 67e0fe730a13..12b357d383d8 100644
--- a/arch/arm/mach-mv78xx0/irqs.h
+++ b/arch/arm/mach-mv78xx0/irqs.h
@@ -1,10 +1,5 @@
-/*
- * IRQ definitions for Marvell MV78xx0 SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* IRQ definitions for Marvell MV78xx0 SoCs */
 
 #ifndef __ASM_ARCH_IRQS_H
 #define __ASM_ARCH_IRQS_H
diff --git a/arch/arm/mach-mv78xx0/mpp.c b/arch/arm/mach-mv78xx0/mpp.c
index 72843c02e95a..aff0e612cbba 100644
--- a/arch/arm/mach-mv78xx0/mpp.c
+++ b/arch/arm/mach-mv78xx0/mpp.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-mv78x00/mpp.c
  *
  * MPP functions for Marvell MV78x00 SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 #include <linux/gpio.h>
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-mv78xx0/mpp.h b/arch/arm/mach-mv78xx0/mpp.h
index 3752302ae2ee..47db52f45546 100644
--- a/arch/arm/mach-mv78xx0/mpp.h
+++ b/arch/arm/mach-mv78xx0/mpp.h
@@ -1,12 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * linux/arch/arm/mach-mv78xx0/mpp.h -- Multi Purpose Pins
  *
- *
  * sebastien requiem <sebastien@requiem.fr>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #ifndef __MV78X00_MPP_H
diff --git a/arch/arm/mach-mv78xx0/mv78xx0.h b/arch/arm/mach-mv78xx0/mv78xx0.h
index c1a9a1d1b295..3f19bef7d7ac 100644
--- a/arch/arm/mach-mv78xx0/mv78xx0.h
+++ b/arch/arm/mach-mv78xx0/mv78xx0.h
@@ -1,10 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Generic definitions for Marvell MV78xx0 SoC flavors:
  *  MV781x0 and MV782x0.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #ifndef __ASM_ARCH_MV78XX0_H
diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c
index e15646af7f26..6190f538a124 100644
--- a/arch/arm/mach-mv78xx0/pcie.c
+++ b/arch/arm/mach-mv78xx0/pcie.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-mv78xx0/pcie.c
  *
  * PCIe functions for Marvell MV78xx0 SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/kernel.h>
@@ -180,14 +177,19 @@ static struct pci_ops pcie_ops = {
 	.write = pcie_wr_conf,
 };
 
+/*
+ * The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it
+ * is operating as a root complex this needs to be switched to
+ * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on
+ * the device. Decoding setup is handled by the orion code.
+ */
 static void rc_pci_fixup(struct pci_dev *dev)
 {
-	/*
-	 * Prevent enumeration of root complex.
-	 */
 	if (dev->bus->parent == NULL && dev->devfn == 0) {
 		int i;
 
+		dev->class &= 0xff;
+		dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
 		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
 			dev->resource[i].start = 0;
 			dev->resource[i].end   = 0;
diff --git a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
index 308ab71ec822..80ca8b1a81de 100644
--- a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
+++ b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-mv78x00/rd78x00-masa-setup.c
  *
  * Marvell RD-78x00-mASA Development Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index 34dbeaab94b0..9f60a6fe0eaf 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -1,8 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 menuconfig ARCH_MVEBU
 	bool "Marvell Engineering Business Unit (MVEBU) SoCs"
-	depends on ARCH_MULTI_V7 || ARCH_MULTI_V5
-	select ARCH_SUPPORTS_BIG_ENDIAN
+	depends on ARCH_MULTI_V7 || (ARCH_MULTI_V5 && CPU_LITTLE_ENDIAN)
 	select CLKSRC_MMIO
 	select PINCTRL
 	select PLAT_ORION
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index cb106899dd7c..c21733cbb4fa 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -1,5 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-orion/include
+ccflags-y := -I$(srctree)/arch/arm/plat-orion/include
 
 AFLAGS_coherency_ll.o		:= -Wa,-march=armv7-a
 CFLAGS_pmsu.o			:= -march=armv7-a
diff --git a/arch/arm/mach-mvebu/armada-370-xp.h b/arch/arm/mach-mvebu/armada-370-xp.h
index 09413b678409..c96ecdafe31f 100644
--- a/arch/arm/mach-mvebu/armada-370-xp.h
+++ b/arch/arm/mach-mvebu/armada-370-xp.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Generic definitions for Marvell Armada_370_XP SoCs
  *
@@ -6,10 +7,6 @@
  * Lior Amsalem <alior@marvell.com>
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #ifndef __MACH_ARMADA_370_XP_H
diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c
index d2df5ef9382b..fd5d0c8ff695 100644
--- a/arch/arm/mach-mvebu/board-v7.c
+++ b/arch/arm/mach-mvebu/board-v7.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree support for Armada 370 and XP platforms.
  *
@@ -6,10 +7,6 @@
  * Lior Amsalem <alior@marvell.com>
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-mvebu/coherency.c b/arch/arm/mach-mvebu/coherency.c
index 49e3c8d20c2f..a6b621ff0b87 100644
--- a/arch/arm/mach-mvebu/coherency.c
+++ b/arch/arm/mach-mvebu/coherency.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Coherency fabric (Aurora) support for Armada 370, 375, 38x and XP
  * platforms.
@@ -8,10 +9,6 @@
  * Gregory Clement <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
  * The Armada 370, 375, 38x and XP SOCs have a coherency fabric which is
  * responsible for ensuring hardware coherency between all CPUs and between
  * CPUs and I/O masters. This file initializes the coherency fabric and
@@ -98,7 +95,7 @@ static int mvebu_hwcc_notifier(struct notifier_block *nb,
 
 	if (event != BUS_NOTIFY_ADD_DEVICE)
 		return NOTIFY_DONE;
-	set_dma_ops(dev, &arm_coherent_dma_ops);
+	dev->dma_coherent = true;
 
 	return NOTIFY_OK;
 }
diff --git a/arch/arm/mach-mvebu/coherency.h b/arch/arm/mach-mvebu/coherency.h
index 6067f14263f7..cae866ab4867 100644
--- a/arch/arm/mach-mvebu/coherency.h
+++ b/arch/arm/mach-mvebu/coherency.h
@@ -1,14 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * arch/arm/mach-mvebu/include/mach/coherency.h
  *
- *
  * Coherency fabric (Aurora) support for Armada 370 and XP platforms.
  *
  * Copyright (C) 2012 Marvell
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #ifndef __MACH_370_XP_COHERENCY_H
diff --git a/arch/arm/mach-mvebu/coherency_ll.S b/arch/arm/mach-mvebu/coherency_ll.S
index a3a64bf97250..eb81656e32d4 100644
--- a/arch/arm/mach-mvebu/coherency_ll.S
+++ b/arch/arm/mach-mvebu/coherency_ll.S
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Coherency fabric: low level functions
  *
@@ -5,10 +6,6 @@
  *
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
  * This file implements the assembly function to add a CPU to the
  * coherency fabric. This function is called by each of the secondary
  * CPUs during their early boot in an SMP kernel, this why this
diff --git a/arch/arm/mach-mvebu/common.h b/arch/arm/mach-mvebu/common.h
index 6b775492cfad..fbfa3c4f30df 100644
--- a/arch/arm/mach-mvebu/common.h
+++ b/arch/arm/mach-mvebu/common.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Core functions for Marvell System On Chip
  *
@@ -6,10 +7,6 @@
  * Lior Amsalem <alior@marvell.com>
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #ifndef __ARCH_MVEBU_COMMON_H
diff --git a/arch/arm/mach-mvebu/cpu-reset.c b/arch/arm/mach-mvebu/cpu-reset.c
index f33a31c6aff8..66b6c0c6ce1d 100644
--- a/arch/arm/mach-mvebu/cpu-reset.c
+++ b/arch/arm/mach-mvebu/cpu-reset.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (C) 2014 Marvell
  *
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #define pr_fmt(fmt) "mvebu-cpureset: " fmt
diff --git a/arch/arm/mach-mvebu/dove.c b/arch/arm/mach-mvebu/dove.c
index d076c5771adc..c938ba725d3e 100644
--- a/arch/arm/mach-mvebu/dove.c
+++ b/arch/arm/mach-mvebu/dove.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-mvebu/dove.c
  *
  * Marvell Dove 88AP510 System On Chip FDT Board
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/init.h>
diff --git a/arch/arm/mach-mvebu/headsmp-a9.S b/arch/arm/mach-mvebu/headsmp-a9.S
index b093a196e801..df723cf85cae 100644
--- a/arch/arm/mach-mvebu/headsmp-a9.S
+++ b/arch/arm/mach-mvebu/headsmp-a9.S
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * SMP support: Entry point for secondary CPUs of Marvell EBU
  * Cortex-A9 based SOCs (Armada 375 and Armada 38x).
@@ -6,10 +7,6 @@
  *
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/linkage.h>
diff --git a/arch/arm/mach-mvebu/headsmp.S b/arch/arm/mach-mvebu/headsmp.S
index 2c4032e368ba..f05c59dad32a 100644
--- a/arch/arm/mach-mvebu/headsmp.S
+++ b/arch/arm/mach-mvebu/headsmp.S
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * SMP support: Entry point for secondary CPUs
  *
@@ -7,10 +8,6 @@
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
  * This file implements the assembly entry point for secondary CPUs in
  * an SMP kernel. The only thing we need to do is to add the CPU to
  * the coherency fabric by writing to 2 registers. Currently the base
diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c
index 06b1706595f4..8ff34753e760 100644
--- a/arch/arm/mach-mvebu/kirkwood.c
+++ b/arch/arm/mach-mvebu/kirkwood.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
  *
  * arch/arm/mach-mvebu/kirkwood.c
  *
  * Flattened Device Tree board initialization
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/clk.h>
diff --git a/arch/arm/mach-mvebu/kirkwood.h b/arch/arm/mach-mvebu/kirkwood.h
index 89f3d1f51643..15135994ce2f 100644
--- a/arch/arm/mach-mvebu/kirkwood.h
+++ b/arch/arm/mach-mvebu/kirkwood.h
@@ -1,12 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * arch/arm/mach-mvebu/kirkwood.h
  *
  * Generic definitions for Marvell Kirkwood SoC flavors:
  * 88F6180, 88F6192 and 88F6281.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #define KIRKWOOD_REGS_PHYS_BASE	0xf1000000
diff --git a/arch/arm/mach-mvebu/mvebu-soc-id.c b/arch/arm/mach-mvebu/mvebu-soc-id.c
index a99434bcee84..f436c7b8c7ae 100644
--- a/arch/arm/mach-mvebu/mvebu-soc-id.c
+++ b/arch/arm/mach-mvebu/mvebu-soc-id.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * ID and revision information for mvebu SoCs
  *
@@ -5,10 +6,6 @@
  *
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
  * All the mvebu SoCs have information related to their variant and
  * revision that can be read from the PCI control register. This is
  * done before the PCI initialization to avoid any conflict. Once the
diff --git a/arch/arm/mach-mvebu/mvebu-soc-id.h b/arch/arm/mach-mvebu/mvebu-soc-id.h
index e124a0b82a3e..225649b2288a 100644
--- a/arch/arm/mach-mvebu/mvebu-soc-id.h
+++ b/arch/arm/mach-mvebu/mvebu-soc-id.h
@@ -1,11 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Marvell EBU SoC ID and revision definitions.
  *
  * Copyright (C) 2014 Marvell Semiconductor
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #ifndef __LINUX_MVEBU_SOC_ID_H
diff --git a/arch/arm/mach-mvebu/platsmp-a9.c b/arch/arm/mach-mvebu/platsmp-a9.c
index d715dec1c197..785ee2af5baa 100644
--- a/arch/arm/mach-mvebu/platsmp-a9.c
+++ b/arch/arm/mach-mvebu/platsmp-a9.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Symmetric Multi Processing (SMP) support for Marvell EBU Cortex-A9
  * based SOCs (Armada 375/38x).
@@ -6,10 +7,6 @@
  *
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/init.h>
diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c
index c130497dc6cc..18384ea6862c 100644
--- a/arch/arm/mach-mvebu/platsmp.c
+++ b/arch/arm/mach-mvebu/platsmp.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Symmetric Multi Processing (SMP) support for Armada XP
  *
@@ -8,10 +9,6 @@
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
  * The Armada XP SoC has 4 ARMv7 PJ4B CPUs running in full HW coherency
  * This file implements the routines for preparing the SMP infrastructure
  * and waking up the secondary CPUs
diff --git a/arch/arm/mach-mvebu/pm-board.c b/arch/arm/mach-mvebu/pm-board.c
index 070552511699..7fa1806acd65 100644
--- a/arch/arm/mach-mvebu/pm-board.c
+++ b/arch/arm/mach-mvebu/pm-board.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Board-level suspend/resume support.
  *
  * Copyright (C) 2014-2015 Marvell
  *
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/delay.h>
diff --git a/arch/arm/mach-mvebu/pm.c b/arch/arm/mach-mvebu/pm.c
index c487be61d6d8..b149d9b77505 100644
--- a/arch/arm/mach-mvebu/pm.c
+++ b/arch/arm/mach-mvebu/pm.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Suspend/resume support. Currently supporting Armada XP only.
  *
  * Copyright (C) 2014 Marvell
  *
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/cpu_pm.h>
diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c
index 73d5d72dfc3e..af27a7156675 100644
--- a/arch/arm/mach-mvebu/pmsu.c
+++ b/arch/arm/mach-mvebu/pmsu.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Power Management Service Unit(PMSU) support for Armada 370/XP platforms.
  *
@@ -7,10 +8,6 @@
  * Gregory Clement <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
  * The Armada 370 and Armada XP SOCs have a power management service
  * unit which is responsible for powering down and waking up CPUs and
  * other SOC units
diff --git a/arch/arm/mach-mvebu/pmsu.h b/arch/arm/mach-mvebu/pmsu.h
index ea79269c2702..1e847388e8dd 100644
--- a/arch/arm/mach-mvebu/pmsu.h
+++ b/arch/arm/mach-mvebu/pmsu.h
@@ -1,11 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Power Management Service Unit (PMSU) support for Armada 370/XP platforms.
  *
  * Copyright (C) 2012 Marvell
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #ifndef __MACH_MVEBU_PMSU_H
diff --git a/arch/arm/mach-mvebu/pmsu_ll.S b/arch/arm/mach-mvebu/pmsu_ll.S
index 7aae9a25cfeb..f7d21385fd88 100644
--- a/arch/arm/mach-mvebu/pmsu_ll.S
+++ b/arch/arm/mach-mvebu/pmsu_ll.S
@@ -1,12 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Copyright (C) 2014 Marvell
  *
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  * Gregory Clement <gregory.clement@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/linkage.h>
diff --git a/arch/arm/mach-mvebu/system-controller.c b/arch/arm/mach-mvebu/system-controller.c
index 04d9ebe6a90a..48224b6ed6dc 100644
--- a/arch/arm/mach-mvebu/system-controller.c
+++ b/arch/arm/mach-mvebu/system-controller.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * System controller support for Armada 370, 375 and XP platforms.
  *
@@ -7,10 +8,6 @@
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
  * The Armada 370, 375 and Armada XP SoCs have a range of
  * miscellaneous registers, that do not belong to a particular device,
  * but rather provide system-level features. This basic
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index be1c1388055a..26dd8b9b7321 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -16,6 +16,7 @@ config SOC_IMX28
 config ARCH_MXS
 	bool "Freescale MXS (i.MX23, i.MX28) support"
 	depends on ARCH_MULTI_V5
+	depends on CPU_LITTLE_ENDIAN
 	select GPIOLIB
 	select MXS_TIMER
 	select PINCTRL
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 25c9d184fa4c..1c57ac401649 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -393,8 +393,10 @@ static void __init mxs_machine_init(void)
 
 	root = of_find_node_by_path("/");
 	ret = of_property_read_string(root, "model", &soc_dev_attr->machine);
-	if (ret)
+	if (ret) {
+		kfree(soc_dev_attr);
 		return;
+	}
 
 	soc_dev_attr->family = "Freescale MXS Family";
 	soc_dev_attr->soc_id = mxs_get_soc_id();
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
index e98429be2b18..f5c4df6d2aad 100644
--- a/arch/arm/mach-nomadik/Kconfig
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -2,10 +2,10 @@
 menuconfig ARCH_NOMADIK
 	bool "ST-Ericsson Nomadik"
 	depends on ARCH_MULTI_V5
+	depends on CPU_LITTLE_ENDIAN
 	select ARM_AMBA
 	select ARM_VIC
 	select CLKSRC_NOMADIK_MTU
-	select CLKSRC_NOMADIK_MTU_SCHED_CLOCK
 	select CPU_ARM926T
 	select GPIOLIB
 	select MFD_SYSCON
diff --git a/arch/arm/mach-npcm/Kconfig b/arch/arm/mach-npcm/Kconfig
index a71cf1d189ae..63b42a19d1b8 100644
--- a/arch/arm/mach-npcm/Kconfig
+++ b/arch/arm/mach-npcm/Kconfig
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 menuconfig ARCH_NPCM
 	bool "Nuvoton NPCM Architecture"
-	depends on ARCH_MULTI_V5 || ARCH_MULTI_V7
+	depends on (ARCH_MULTI_V5 && CPU_LITTLE_ENDIAN) || ARCH_MULTI_V7
 	select PINCTRL
 
 if ARCH_NPCM
diff --git a/arch/arm/mach-nspire/Kconfig b/arch/arm/mach-nspire/Kconfig
index b3d161e8e2fb..b7a3871876d7 100644
--- a/arch/arm/mach-nspire/Kconfig
+++ b/arch/arm/mach-nspire/Kconfig
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0-only
 config ARCH_NSPIRE
 	bool "TI-NSPIRE based"
-	depends on ARCH_MULTI_V4_V5
-	depends on MMU
+	depends on ARCH_MULTI_V4T
+	depends on CPU_LITTLE_ENDIAN
 	select CPU_ARM926T
 	select GENERIC_IRQ_CHIP
 	select ARM_AMBA
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index 208c700c2455..538a960257cc 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -1,4 +1,17 @@
 # SPDX-License-Identifier: GPL-2.0-only
+menuconfig ARCH_OMAP1
+	bool "TI OMAP1"
+	depends on ARCH_MULTI_V4T || ARCH_MULTI_V5
+	depends on CPU_LITTLE_ENDIAN
+	depends on ATAGS
+	select ARCH_HAS_HOLES_MEMORYMODEL
+	select ARCH_OMAP
+	select CLKSRC_MMIO
+	select FORCE_PCI if PCCARD
+	select GPIOLIB
+	help
+	  Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
+
 if ARCH_OMAP1
 
 menu "TI OMAP1 specific features"
@@ -6,28 +19,41 @@ menu "TI OMAP1 specific features"
 comment "OMAP Core Type"
 
 config ARCH_OMAP730
+	depends on ARCH_MULTI_V5
 	bool "OMAP730 Based System"
 	select ARCH_OMAP_OTG
 	select CPU_ARM926T
 	select OMAP_MPU_TIMER
 
 config ARCH_OMAP850
+	depends on ARCH_MULTI_V5
 	bool "OMAP850 Based System"
 	select ARCH_OMAP_OTG
 	select CPU_ARM926T
 
 config ARCH_OMAP15XX
+	depends on ARCH_MULTI_V4T
 	default y
 	bool "OMAP15xx Based System"
 	select CPU_ARM925T
 	select OMAP_MPU_TIMER
 
 config ARCH_OMAP16XX
+	depends on ARCH_MULTI_V5
 	bool "OMAP16xx Based System"
 	select ARCH_OMAP_OTG
 	select CPU_ARM926T
 	select OMAP_DM_TIMER
 
+config ARCH_OMAP1_ANY
+	select ARCH_OMAP
+	def_bool ARCH_OMAP730 || ARCH_OMAP850 || ARCH_OMAP15XX || ARCH_OMAP16XX
+
+config ARCH_OMAP
+	bool
+
+comment "OMAP Feature Selections"
+
 config OMAP_MUX
 	bool "OMAP multiplexing support"
 	default y
@@ -53,11 +79,60 @@ config OMAP_MUX_WARNINGS
 	  to change the pin multiplexing setup.	 When there are no warnings
 	  printed, it's safe to deselect OMAP_MUX for your product.
 
+config OMAP_32K_TIMER
+	bool "Use 32KHz timer"
+	depends on ARCH_OMAP16XX
+	default ARCH_OMAP16XX
+	help
+	  Select this option if you want to enable the OMAP 32KHz timer.
+	  This timer saves power compared to the OMAP_MPU_TIMER, and has
+	  support for no tick during idle. The 32KHz timer provides less
+	  intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
+	  currently only available for OMAP16XX, 24XX, 34XX, OMAP4/5 and DRA7XX.
+
+	  On OMAP2PLUS this value is only used for CONFIG_HZ and
+	  CLOCK_TICK_RATE compile time calculation.
+	  The actual timer selection is done in the board file
+	  through the (DT_)MACHINE_START structure.
+
+config OMAP_MPU_TIMER
+	bool "Use mpu timer"
+	depends on ARCH_OMAP1
+	help
+	  Select this option if you want to use the OMAP mpu timer. This
+	  timer provides more intra-tick resolution than the 32KHz timer,
+	  but consumes more power.
+
+config OMAP_SERIAL_WAKE
+	bool "Enable wake-up events for serial ports"
+	depends on ARCH_OMAP1 && OMAP_MUX
+	default y
+	help
+	  Select this option if you want to have your system wake up
+	  to data on the serial RX line. This allows you to wake the
+	  system from serial console.
+
+config OMAP_RESET_CLOCKS
+	bool "Reset unused clocks during boot"
+	depends on ARCH_OMAP
+	help
+	  Say Y if you want to reset unused clocks during boot.
+	  This option saves power, but assumes all drivers are
+	  using the clock framework. Broken drivers that do not
+	  yet use clock framework may not work with this option.
+	  If you are booting from another operating system, you
+	  probably do not want this option enabled until your
+	  device drivers work properly.
+
+config ARCH_OMAP_OTG
+	bool
+
 comment "OMAP Board Type"
 
 config MACH_OMAP_INNOVATOR
 	bool "TI Innovator"
 	depends on ARCH_OMAP15XX || ARCH_OMAP16XX
+	depends on UNUSED_BOARD_FILES
 	help
           TI OMAP 1510 or 1610 Innovator board support. Say Y here if you
           have such a board.
@@ -65,6 +140,7 @@ config MACH_OMAP_INNOVATOR
 config MACH_OMAP_H2
 	bool "TI H2 Support"
 	depends on ARCH_OMAP16XX
+	depends on UNUSED_BOARD_FILES
 	help
 	  TI OMAP 1610/1611B H2 board support. Say Y here if you have such
 	  a board.
@@ -72,6 +148,7 @@ config MACH_OMAP_H2
 config MACH_OMAP_H3
 	bool "TI H3 Support"
 	depends on ARCH_OMAP16XX
+	depends on UNUSED_BOARD_FILES
 	help
 	  TI OMAP 1710 H3 board support. Say Y here if you have such
 	  a board.
@@ -79,6 +156,7 @@ config MACH_OMAP_H3
 config MACH_HERALD
 	bool "HTC Herald"
 	depends on ARCH_OMAP850
+	depends on UNUSED_BOARD_FILES
 	help
 	  HTC Herald smartphone support (AKA T-Mobile Wing, ...)
 
@@ -92,6 +170,7 @@ config MACH_OMAP_OSK
 config OMAP_OSK_MISTRAL
 	bool "Mistral QVGA board Support"
 	depends on MACH_OMAP_OSK
+	depends on UNUSED_BOARD_FILES
 	help
 	  The OSK supports an optional add-on board with a Quarter-VGA
 	  touchscreen, PDA-ish buttons, a resume button, bicolor LED,
@@ -100,6 +179,7 @@ config OMAP_OSK_MISTRAL
 config MACH_OMAP_PERSEUS2
 	bool "TI Perseus2"
 	depends on ARCH_OMAP730
+	depends on UNUSED_BOARD_FILES
 	help
 	  Support for TI OMAP 730 Perseus2 board. Say Y here if you have such
 	  a board.
@@ -107,6 +187,7 @@ config MACH_OMAP_PERSEUS2
 config MACH_OMAP_FSAMPLE
 	bool "TI F-Sample"
 	depends on ARCH_OMAP730
+	depends on UNUSED_BOARD_FILES
 	help
 	  Support for TI OMAP 850 F-Sample board. Say Y here if you have such
 	  a board.
@@ -123,6 +204,7 @@ config MACH_OMAP_PALMTE
 config MACH_OMAP_PALMZ71
 	bool "Palm Zire71"
 	depends on ARCH_OMAP15XX
+	depends on UNUSED_BOARD_FILES
 	help
 	 Support for the Palm Zire71 PDA. To boot the kernel,
 	 you'll need a PalmOS compatible bootloader; check out
@@ -132,6 +214,7 @@ config MACH_OMAP_PALMZ71
 config MACH_OMAP_PALMTT
 	bool "Palm Tungsten|T"
 	depends on ARCH_OMAP15XX
+	depends on UNUSED_BOARD_FILES
 	help
 	  Support for the Palm Tungsten|T PDA. To boot the kernel, you'll
 	  need a PalmOS compatible bootloader (Garux); check out
@@ -172,6 +255,7 @@ config MACH_AMS_DELTA
 config MACH_OMAP_GENERIC
 	bool "Generic OMAP board"
 	depends on ARCH_OMAP15XX || ARCH_OMAP16XX
+	depends on UNUSED_BOARD_FILES
 	help
           Support for generic OMAP-1510, 1610 or 1710 board with
           no FPGA. Can be used as template for porting Linux to
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index c757a52d0801..506074b86333 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -3,9 +3,11 @@
 # Makefile for the linux kernel.
 #
 
+ifdef CONFIG_ARCH_OMAP1_ANY
+
 # Common support
 obj-y := io.o id.o sram-init.o sram.o time.o irq.o mux.o flash.o \
-	 serial.o devices.o dma.o fb.o
+	 serial.o devices.o dma.o omap-dma.o fb.o
 obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o
 
 ifneq ($(CONFIG_SND_SOC_OMAP_MCBSP),)
@@ -58,6 +60,4 @@ obj-$(CONFIG_ARCH_OMAP850)		+= gpio7xx.o
 obj-$(CONFIG_ARCH_OMAP15XX)		+= gpio15xx.o
 obj-$(CONFIG_ARCH_OMAP16XX)		+= gpio16xx.o
 
-ifneq ($(CONFIG_FB_OMAP),)
-obj-y += lcd_dma.o
 endif
diff --git a/arch/arm/mach-omap1/Makefile.boot b/arch/arm/mach-omap1/Makefile.boot
deleted file mode 100644
index 2c771515a606..000000000000
--- a/arch/arm/mach-omap1/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-   zreladdr-y		+= 0x10008000
-params_phys-y		:= 0x10000100
-initrd_phys-y		:= 0x10800000
diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
index f745a65d3bd7..35c2f9574dbd 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S
+++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
@@ -13,14 +13,15 @@
 #include <linux/linkage.h>
 #include <linux/platform_data/ams-delta-fiq.h>
 #include <linux/platform_data/gpio-omap.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #include <asm/assembler.h>
 #include <asm/irq.h>
 
+#include "hardware.h"
 #include "ams-delta-fiq.h"
 #include "board-ams-delta.h"
 #include "iomap.h"
-#include "soc.h"
 
 /*
  * OMAP1510 GPIO related symbol copied from arch/arm/mach-omap1/gpio15xx.c.
diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c
index 4eea3e39e633..1f5852be057e 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq.c
+++ b/arch/arm/mach-omap1/ams-delta-fiq.c
@@ -21,7 +21,9 @@
 #include <linux/platform_device.h>
 
 #include <asm/fiq.h>
+#include <linux/soc/ti/omap1-io.h>
 
+#include "hardware.h"
 #include "ams-delta-fiq.h"
 #include "board-ams-delta.h"
 
diff --git a/arch/arm/mach-omap1/ams-delta-fiq.h b/arch/arm/mach-omap1/ams-delta-fiq.h
index fd76df3cce37..7f843caedb7c 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq.h
+++ b/arch/arm/mach-omap1/ams-delta-fiq.h
@@ -16,7 +16,7 @@
 #ifndef __AMS_DELTA_FIQ_H
 #define __AMS_DELTA_FIQ_H
 
-#include <mach/irqs.h>
+#include "irqs.h"
 
 /*
  * Interrupt number used for passing control from FIQ to IRQ.
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 1026a816dcc0..651c28d81132 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -28,6 +28,7 @@
 #include <linux/omapfb.h>
 #include <linux/io.h>
 #include <linux/platform_data/gpio-omap.h>
+#include <linux/soc/ti/omap1-mux.h>
 
 #include <asm/serial.h>
 #include <asm/mach-types.h>
@@ -35,11 +36,9 @@
 #include <asm/mach/map.h>
 
 #include <linux/platform_data/keypad-omap.h>
-#include <mach/mux.h>
-
-#include <mach/hardware.h>
-#include <mach/usb.h>
 
+#include "hardware.h"
+#include "usb.h"
 #include "ams-delta-fiq.h"
 #include "board-ams-delta.h"
 #include "iomap.h"
@@ -407,9 +406,6 @@ static struct gpio_led gpio_leds[] __initdata = {
 	[LATCH1_PIN_LED_CAMERA] = {
 		.name		 = "camera",
 		.default_state	 = LEDS_GPIO_DEFSTATE_OFF,
-#ifdef CONFIG_LEDS_TRIGGERS
-		.default_trigger = "ams_delta_camera",
-#endif
 	},
 	[LATCH1_PIN_LED_ADVERT] = {
 		.name		 = "advert",
@@ -456,10 +452,6 @@ static struct gpiod_lookup_table leds_gpio_table = {
 	},
 };
 
-#ifdef CONFIG_LEDS_TRIGGERS
-DEFINE_LED_TRIGGER(ams_delta_camera_led_trigger);
-#endif
-
 static struct platform_device ams_delta_audio_device = {
 	.name   = "ams-delta-audio",
 	.id     = -1,
@@ -672,7 +664,7 @@ static void __init ams_delta_latch2_init(void)
 {
 	u16 latch2 = 1 << LATCH2_PIN_MODEM_NRESET | 1 << LATCH2_PIN_MODEM_CODEC;
 
-	__raw_writew(latch2, LATCH2_VIRT);
+	__raw_writew(latch2, IOMEM(LATCH2_VIRT));
 }
 
 static void __init ams_delta_init(void)
@@ -705,10 +697,6 @@ static void __init ams_delta_init(void)
 	omap_register_i2c_bus(1, 100, NULL, 0);
 
 	omap1_usb_init(&ams_delta_usb_config);
-#ifdef CONFIG_LEDS_TRIGGERS
-	led_trigger_register_simple("ams_delta_camera",
-			&ams_delta_camera_led_trigger);
-#endif
 	platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
 
 	/*
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index c3aa6f2e5546..f21e15c7b973 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -23,13 +23,13 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/tc.h>
-#include <mach/mux.h>
-#include "flash.h"
+#include <linux/soc/ti/omap1-io.h>
 #include <linux/platform_data/keypad-omap.h>
+#include "tc.h"
 
-#include <mach/hardware.h>
-
+#include "mux.h"
+#include "flash.h"
+#include "hardware.h"
 #include "iomap.h"
 #include "common.h"
 #include "fpga.h"
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index c62554990115..3b2bcaf4bb01 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -14,15 +14,13 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/mux.h>
-
-#include <mach/usb.h>
-
+#include "hardware.h"
+#include "mux.h"
+#include "usb.h"
 #include "common.h"
 
 /* assume no Mini-AB port */
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 977b0b744c22..f28a4c3ea501 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -28,22 +28,20 @@
 #include <linux/mfd/tps65010.h>
 #include <linux/smc91x.h>
 #include <linux/omapfb.h>
+#include <linux/omap-dma.h>
 #include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/keypad-omap.h>
 #include <linux/leds.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/mux.h>
-#include <linux/omap-dma.h>
-#include <mach/tc.h>
-#include <linux/platform_data/keypad-omap.h>
+#include "tc.h"
+#include "mux.h"
 #include "flash.h"
-
-#include <mach/hardware.h>
-#include <mach/usb.h>
-
+#include "hardware.h"
+#include "usb.h"
 #include "common.h"
 #include "board-h2.h"
 
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 4249984f9c30..1e4c57710fcc 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -29,6 +29,8 @@
 #include <linux/smc91x.h>
 #include <linux/omapfb.h>
 #include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/keypad-omap.h>
+#include <linux/omap-dma.h>
 #include <linux/leds.h>
 
 #include <asm/setup.h>
@@ -37,16 +39,12 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/mux.h>
-#include <mach/tc.h>
-#include <linux/platform_data/keypad-omap.h>
-#include <linux/omap-dma.h>
+#include "tc.h"
+#include "mux.h"
 #include "flash.h"
-
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/usb.h>
-
+#include "hardware.h"
+#include "irqs.h"
+#include "usb.h"
 #include "common.h"
 #include "board-h3.h"
 
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 258304edf23e..291d294b5824 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -23,16 +23,16 @@
 #include <linux/spi/ads7846.h>
 #include <linux/omapfb.h>
 #include <linux/platform_data/keypad-omap.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/omap7xx.h>
+#include "hardware.h"
+#include "omap7xx.h"
 #include "mmc.h"
-
-#include <mach/irqs.h>
-#include <mach/usb.h>
-
+#include "irqs.h"
+#include "usb.h"
 #include "common.h"
 
 /* LCD register definition */
@@ -141,13 +141,6 @@
 #define HTCPLD_GPIO_DOWN_DPAD		HTCPLD_BASE(7, 4)
 #define HTCPLD_GPIO_ENTER_DPAD		HTCPLD_BASE(7, 3)
 
-/*
- * The htcpld chip requires a gpio write to a specific line
- * to re-enable interrupts after one has occurred.
- */
-#define HTCPLD_GPIO_INT_RESET_HI	HTCPLD_BASE(2, 7)
-#define HTCPLD_GPIO_INT_RESET_LO	HTCPLD_BASE(2, 0)
-
 /* Chip 5 */
 #define HTCPLD_IRQ_RIGHT_KBD		HTCPLD_IRQ(0, 7)
 #define HTCPLD_IRQ_UP_KBD		HTCPLD_IRQ(0, 6)
@@ -170,7 +163,7 @@ static const unsigned int htc_herald_keymap[] = {
 	KEY(3, 0, KEY_VOLUMEUP), /* Volume up */
 	KEY(4, 0, KEY_F2),  /* Right bar (landscape) */
 	KEY(5, 0, KEY_MAIL), /* Win key (portrait) */
-	KEY(6, 0, KEY_DIRECTORY), /* Right bar (protrait) */
+	KEY(6, 0, KEY_DIRECTORY), /* Right bar (portrait) */
 	KEY(0, 1, KEY_LEFTCTRL), /* Windows key */
 	KEY(1, 1, KEY_COMMA),
 	KEY(2, 1, KEY_M),
@@ -348,8 +341,6 @@ static struct htcpld_chip_platform_data htcpld_chips[] = {
 };
 
 static struct htcpld_core_platform_data htcpld_pfdata = {
-	.int_reset_gpio_hi = HTCPLD_GPIO_INT_RESET_HI,
-	.int_reset_gpio_lo = HTCPLD_GPIO_INT_RESET_LO,
 	.i2c_adapter_id	   = 1,
 
 	.chip		   = htcpld_chips,
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index cbe093f969d5..6deb4ca079e9 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -23,19 +23,17 @@
 #include <linux/input.h>
 #include <linux/smc91x.h>
 #include <linux/omapfb.h>
+#include <linux/platform_data/keypad-omap.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/mux.h>
+#include "tc.h"
+#include "mux.h"
 #include "flash.h"
-#include <mach/tc.h>
-#include <linux/platform_data/keypad-omap.h>
-
-#include <mach/hardware.h>
-#include <mach/usb.h>
-
+#include "hardware.h"
+#include "usb.h"
 #include "iomap.h"
 #include "common.h"
 #include "mmc.h"
@@ -194,6 +192,9 @@ static struct platform_device innovator1510_smc91x_device = {
 static struct platform_device innovator1510_lcd_device = {
 	.name		= "lcd_inn1510",
 	.id		= -1,
+	.dev	= {
+		.platform_data = (void __force *)OMAP1510_FPGA_LCD_PANEL_CONTROL,
+	}
 };
 
 static struct platform_device innovator1510_spi_device = {
@@ -287,6 +288,23 @@ static void __init innovator_init_smc91x(void)
 }
 
 #ifdef CONFIG_ARCH_OMAP15XX
+/*
+ * Board specific gang-switched transceiver power on/off.
+ */
+static int innovator_omap_ohci_transceiver_power(int on)
+{
+	if (on)
+		__raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL)
+				| ((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
+			       INNOVATOR_FPGA_CAM_USB_CONTROL);
+	else
+		__raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL)
+				& ~((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
+			       INNOVATOR_FPGA_CAM_USB_CONTROL);
+
+	return 0;
+}
+
 static struct omap_usb_config innovator1510_usb_config __initdata = {
 	/* for bundled non-standard host and peripheral cables */
 	.hmc_mode	= 4,
@@ -297,6 +315,8 @@ static struct omap_usb_config innovator1510_usb_config __initdata = {
 
 	.register_dev	= 1,
 	.pins[0]	= 2,
+
+	.transceiver_power = innovator_omap_ohci_transceiver_power,
 };
 
 static const struct omap_lcd_config innovator1510_lcd_config __initconst = {
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 11511ae2e0a2..8e0e58495023 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -28,11 +28,9 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/mux.h>
-
-#include <mach/hardware.h>
-#include <mach/usb.h>
-
+#include "mux.h"
+#include "hardware.h"
+#include "usb.h"
 #include "common.h"
 #include "clock.h"
 #include "mmc.h"
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index e18b6f13300e..76684b7a4e87 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -42,18 +42,17 @@
 #include <linux/mfd/tps65010.h>
 #include <linux/platform_data/gpio-omap.h>
 #include <linux/platform_data/omap1_bl.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
+#include "tc.h"
 #include "flash.h"
-#include <mach/mux.h>
-#include <mach/tc.h>
-
-#include <mach/hardware.h>
-#include <mach/usb.h>
-
+#include "mux.h"
+#include "hardware.h"
+#include "usb.h"
 #include "common.h"
 
 /* Name of the GPIO chip used by the OMAP for GPIOs 0..15 */
@@ -153,14 +152,14 @@ static struct resource osk5912_cf_resources[] = {
 	[0] = {
 		.flags	= IORESOURCE_IRQ,
 	},
+	[1] = {
+		.flags = IORESOURCE_MEM,
+	},
 };
 
 static struct platform_device osk5912_cf_device = {
 	.name		= "omap_cf",
 	.id		= -1,
-	.dev = {
-		.platform_data	= (void *) 2 /* CS2 */,
-	},
 	.num_resources	= ARRAY_SIZE(osk5912_cf_resources),
 	.resource	= osk5912_cf_resources,
 };
@@ -275,13 +274,41 @@ static void __init osk_init_smc91x(void)
 	omap_writel(l, EMIFS_CCS(1));
 }
 
-static void __init osk_init_cf(void)
+static void __init osk_init_cf(int seg)
 {
+	struct resource *res = &osk5912_cf_resources[1];
+
 	omap_cfg_reg(M7_1610_GPIO62);
 	if ((gpio_request(62, "cf_irq")) < 0) {
 		printk("Error requesting gpio 62 for CF irq\n");
 		return;
 	}
+
+	switch (seg) {
+	/* NOTE: CS0 could be configured too ... */
+	case 1:
+		res->start = OMAP_CS1_PHYS;
+		break;
+	case 2:
+		res->start = OMAP_CS2_PHYS;
+		break;
+	case 3:
+		res->start = omap_cs3_phys();
+		break;
+	}
+
+	res->end = res->start + SZ_8K - 1;
+	osk5912_cf_device.dev.platform_data = (void *)(uintptr_t)seg;
+
+	/* NOTE:  better EMIFS setup might support more cards; but the
+	 * TRM only shows how to affect regular flash signals, not their
+	 * CF/PCMCIA variants...
+	 */
+	pr_debug("%s: cs%d, previous ccs %08x acs %08x\n", __func__,
+		seg, omap_readl(EMIFS_CCS(seg)), omap_readl(EMIFS_ACS(seg)));
+	omap_writel(0x0004a1b3, EMIFS_CCS(seg));	/* synch mode 4 etc */
+	omap_writel(0x00000000, EMIFS_ACS(seg));	/* OE hold/setup */
+
 	/* the CF I/O IRQ is really active-low */
 	irq_set_irq_type(gpio_to_irq(62), IRQ_TYPE_EDGE_FALLING);
 }
@@ -580,7 +607,7 @@ static void __init osk_init(void)
 	u32 l;
 
 	osk_init_smc91x();
-	osk_init_cf();
+	osk_init_cf(2); /* CS2 */
 
 	/* Workaround for wrong CS3 (NOR flash) timing
 	 * There are some U-Boot versions out there which configure
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index ce6f0fcd9d12..72e1979c7a8b 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -25,21 +25,19 @@
 #include <linux/interrupt.h>
 #include <linux/apm-emulation.h>
 #include <linux/omapfb.h>
+#include <linux/omap-dma.h>
+#include <linux/platform_data/keypad-omap.h>
 #include <linux/platform_data/omap1_bl.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
+#include "tc.h"
 #include "flash.h"
-#include <mach/mux.h>
-#include <mach/tc.h>
-#include <linux/omap-dma.h>
-#include <linux/platform_data/keypad-omap.h>
-
-#include <mach/hardware.h>
-#include <mach/usb.h>
-
+#include "mux.h"
+#include "hardware.h"
+#include "usb.h"
 #include "mmc.h"
 #include "common.h"
 
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 8a08311c4e05..537f0e6a2ff7 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -24,22 +24,20 @@
 #include <linux/omapfb.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
+#include <linux/omap-dma.h>
 #include <linux/platform_data/omap1_bl.h>
 #include <linux/platform_data/leds-omap.h>
+#include <linux/platform_data/keypad-omap.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
+#include "tc.h"
 #include "flash.h"
-#include <mach/mux.h>
-#include <linux/omap-dma.h>
-#include <mach/tc.h>
-#include <linux/platform_data/keypad-omap.h>
-
-#include <mach/hardware.h>
-#include <mach/usb.h>
-
+#include "mux.h"
+#include "hardware.h"
+#include "usb.h"
 #include "common.h"
 
 #define PALMTT_USBDETECT_GPIO	0
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 034e5bc6a029..47f08ae5a2f3 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -28,20 +28,18 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/platform_data/omap1_bl.h>
+#include <linux/platform_data/keypad-omap.h>
+#include <linux/omap-dma.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
+#include "tc.h"
 #include "flash.h"
-#include <mach/mux.h>
-#include <linux/omap-dma.h>
-#include <mach/tc.h>
-#include <linux/platform_data/keypad-omap.h>
-
-#include <mach/hardware.h>
-#include <mach/usb.h>
-
+#include "mux.h"
+#include "hardware.h"
+#include "usb.h"
 #include "common.h"
 
 #define PALMZ71_USBDETECT_GPIO	0
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 1aeeb7337d29..b041e6f6e9cf 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -19,17 +19,16 @@
 #include <linux/smc91x.h>
 #include <linux/omapfb.h>
 #include <linux/platform_data/keypad-omap.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/tc.h>
-#include <mach/mux.h>
+#include "tc.h"
+#include "mux.h"
 #include "flash.h"
-
-#include <mach/hardware.h>
-
+#include "hardware.h"
 #include "iomap.h"
 #include "common.h"
 #include "fpga.h"
@@ -289,6 +288,12 @@ static void __init omap_perseus2_init(void)
 	omap_cfg_reg(F4_7XX_KBC3);
 	omap_cfg_reg(E3_7XX_KBC4);
 
+	if (IS_ENABLED(CONFIG_SPI_OMAP_UWIRE)) {
+		/* configure pins: MPU_UW_nSCS1, MPU_UW_SDO, MPU_UW_SCLK */
+		int val = omap_readl(OMAP7XX_IO_CONF_9) & ~0x00EEE000;
+		omap_writel(val | 0x00AAA000, OMAP7XX_IO_CONF_9);
+	}
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	omap_serial_init();
diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c
index 6192b1da75cb..f1c160924dfe 100644
--- a/arch/arm/mach-omap1/board-sx1-mmc.c
+++ b/arch/arm/mach-omap1/board-sx1-mmc.c
@@ -12,9 +12,8 @@
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
 
-#include <mach/hardware.h>
+#include "hardware.h"
 #include "board-sx1.h"
-
 #include "mmc.h"
 
 #if IS_ENABLED(CONFIG_MMC_OMAP)
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index bb9ec345e204..f0dbb0e8d8e7 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -26,20 +26,18 @@
 #include <linux/export.h>
 #include <linux/omapfb.h>
 #include <linux/platform_data/keypad-omap.h>
+#include <linux/omap-dma.h>
+#include "tc.h"
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
 #include "flash.h"
-#include <mach/mux.h>
-#include <linux/omap-dma.h>
-#include <mach/tc.h>
+#include "mux.h"
 #include "board-sx1.h"
-
-#include <mach/hardware.h>
-#include <mach/usb.h>
-
+#include "hardware.h"
+#include "usb.h"
 #include "common.h"
 
 /* Write to I2C device */
diff --git a/arch/arm/mach-omap1/board-sx1.h b/arch/arm/mach-omap1/board-sx1.h
index 355adbdaae33..fafe54a2e444 100644
--- a/arch/arm/mach-omap1/board-sx1.h
+++ b/arch/arm/mach-omap1/board-sx1.h
@@ -1,15 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Siemens SX1 board definitions
  *
  * Copyright: Vovan888 at gmail com
- *
- * This package is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
  */
 
 #ifndef __ASM_ARCH_SX1_I2C_CHIPS_H
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 9d4a0ab50a46..83381e23fab9 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -16,11 +16,13 @@
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/soc/ti/omap1-io.h>
+#include <linux/spinlock.h>
 
 #include <asm/mach-types.h>
 
-#include <mach/hardware.h>
-
+#include "hardware.h"
 #include "soc.h"
 #include "iomap.h"
 #include "clock.h"
@@ -28,33 +30,37 @@
 #include "sram.h"
 
 __u32 arm_idlect1_mask;
-struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p;
+/* provide direct internal access (not via clk API) to some clocks */
+struct omap1_clk *api_ck_p, *ck_dpll1_p, *ck_ref_p;
 
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
-static DEFINE_SPINLOCK(clockfw_lock);
+/* protect registeres shared among clk_enable/disable() and clk_set_rate() operations */
+static DEFINE_SPINLOCK(arm_ckctl_lock);
+static DEFINE_SPINLOCK(arm_idlect2_lock);
+static DEFINE_SPINLOCK(mod_conf_ctrl_0_lock);
+static DEFINE_SPINLOCK(mod_conf_ctrl_1_lock);
+static DEFINE_SPINLOCK(swd_clk_div_ctrl_sel_lock);
 
 /*
  * Omap1 specific clock functions
  */
 
-unsigned long omap1_uart_recalc(struct clk *clk)
+unsigned long omap1_uart_recalc(struct omap1_clk *clk, unsigned long p_rate)
 {
 	unsigned int val = __raw_readl(clk->enable_reg);
-	return val & clk->enable_bit ? 48000000 : 12000000;
+	return val & 1 << clk->enable_bit ? 48000000 : 12000000;
 }
 
-unsigned long omap1_sossi_recalc(struct clk *clk)
+unsigned long omap1_sossi_recalc(struct omap1_clk *clk, unsigned long p_rate)
 {
 	u32 div = omap_readl(MOD_CONF_CTRL_1);
 
 	div = (div >> 17) & 0x7;
 	div++;
 
-	return clk->parent->rate / div;
+	return p_rate / div;
 }
 
-static void omap1_clk_allow_idle(struct clk *clk)
+static void omap1_clk_allow_idle(struct omap1_clk *clk)
 {
 	struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk;
 
@@ -65,7 +71,7 @@ static void omap1_clk_allow_idle(struct clk *clk)
 		arm_idlect1_mask |= 1 << iclk->idlect_shift;
 }
 
-static void omap1_clk_deny_idle(struct clk *clk)
+static void omap1_clk_deny_idle(struct omap1_clk *clk)
 {
 	struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk;
 
@@ -129,7 +135,7 @@ static __u16 verify_ckctl_value(__u16 newval)
 	return newval;
 }
 
-static int calc_dsor_exp(struct clk *clk, unsigned long rate)
+static int calc_dsor_exp(unsigned long rate, unsigned long realrate)
 {
 	/* Note: If target frequency is too low, this function will return 4,
 	 * which is invalid value. Caller must check for this value and act
@@ -142,15 +148,11 @@ static int calc_dsor_exp(struct clk *clk, unsigned long rate)
 	 * DSP_CK >= TC_CK
 	 * DSPMMU_CK >= TC_CK
 	 */
-	unsigned long realrate;
-	struct clk * parent;
 	unsigned  dsor_exp;
 
-	parent = clk->parent;
-	if (unlikely(parent == NULL))
+	if (unlikely(realrate == 0))
 		return -EIO;
 
-	realrate = parent->rate;
 	for (dsor_exp=0; dsor_exp<4; dsor_exp++) {
 		if (realrate <= rate)
 			break;
@@ -161,16 +163,50 @@ static int calc_dsor_exp(struct clk *clk, unsigned long rate)
 	return dsor_exp;
 }
 
-unsigned long omap1_ckctl_recalc(struct clk *clk)
+unsigned long omap1_ckctl_recalc(struct omap1_clk *clk, unsigned long p_rate)
 {
 	/* Calculate divisor encoded as 2-bit exponent */
 	int dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset));
 
-	return clk->parent->rate / dsor;
+	/* update locally maintained rate, required by arm_ck for omap1_show_rates() */
+	clk->rate = p_rate / dsor;
+	return clk->rate;
+}
+
+static int omap1_clk_is_enabled(struct clk_hw *hw)
+{
+	struct omap1_clk *clk = to_omap1_clk(hw);
+	bool api_ck_was_enabled = true;
+	__u32 regval32;
+	int ret;
+
+	if (!clk->ops)	/* no gate -- always enabled */
+		return 1;
+
+	if (clk->ops == &clkops_dspck) {
+		api_ck_was_enabled = omap1_clk_is_enabled(&api_ck_p->hw);
+		if (!api_ck_was_enabled)
+			if (api_ck_p->ops->enable(api_ck_p) < 0)
+				return 0;
+	}
+
+	if (clk->flags & ENABLE_REG_32BIT)
+		regval32 = __raw_readl(clk->enable_reg);
+	else
+		regval32 = __raw_readw(clk->enable_reg);
+
+	ret = regval32 & (1 << clk->enable_bit);
+
+	if (!api_ck_was_enabled)
+		api_ck_p->ops->disable(api_ck_p);
+
+	return ret;
 }
 
-unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk)
+
+unsigned long omap1_ckctl_recalc_dsp_domain(struct omap1_clk *clk, unsigned long p_rate)
 {
+	bool api_ck_was_enabled;
 	int dsor;
 
 	/* Calculate divisor encoded as 2-bit exponent
@@ -180,15 +216,18 @@ unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk)
 	 * Note that DSP_CKCTL virt addr = phys addr, so
 	 * we must use __raw_readw() instead of omap_readw().
 	 */
-	omap1_clk_enable(api_ck_p);
+	api_ck_was_enabled = omap1_clk_is_enabled(&api_ck_p->hw);
+	if (!api_ck_was_enabled)
+		api_ck_p->ops->enable(api_ck_p);
 	dsor = 1 << (3 & (__raw_readw(DSP_CKCTL) >> clk->rate_offset));
-	omap1_clk_disable(api_ck_p);
+	if (!api_ck_was_enabled)
+		api_ck_p->ops->disable(api_ck_p);
 
-	return clk->parent->rate / dsor;
+	return p_rate / dsor;
 }
 
 /* MPU virtual clock functions */
-int omap1_select_table_rate(struct clk *clk, unsigned long rate)
+int omap1_select_table_rate(struct omap1_clk *clk, unsigned long rate, unsigned long p_rate)
 {
 	/* Find the highest supported frequency <= rate and switch to it */
 	struct mpu_rate * ptr;
@@ -223,12 +262,12 @@ int omap1_select_table_rate(struct clk *clk, unsigned long rate)
 	return 0;
 }
 
-int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate)
+int omap1_clk_set_rate_dsp_domain(struct omap1_clk *clk, unsigned long rate, unsigned long p_rate)
 {
 	int dsor_exp;
 	u16 regval;
 
-	dsor_exp = calc_dsor_exp(clk, rate);
+	dsor_exp = calc_dsor_exp(rate, p_rate);
 	if (dsor_exp > 3)
 		dsor_exp = -EINVAL;
 	if (dsor_exp < 0)
@@ -238,42 +277,51 @@ int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate)
 	regval &= ~(3 << clk->rate_offset);
 	regval |= dsor_exp << clk->rate_offset;
 	__raw_writew(regval, DSP_CKCTL);
-	clk->rate = clk->parent->rate / (1 << dsor_exp);
+	clk->rate = p_rate / (1 << dsor_exp);
 
 	return 0;
 }
 
-long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate)
+long omap1_clk_round_rate_ckctl_arm(struct omap1_clk *clk, unsigned long rate,
+				    unsigned long *p_rate)
 {
-	int dsor_exp = calc_dsor_exp(clk, rate);
+	int dsor_exp = calc_dsor_exp(rate, *p_rate);
+
 	if (dsor_exp < 0)
 		return dsor_exp;
 	if (dsor_exp > 3)
 		dsor_exp = 3;
-	return clk->parent->rate / (1 << dsor_exp);
+	return *p_rate / (1 << dsor_exp);
 }
 
-int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate)
+int omap1_clk_set_rate_ckctl_arm(struct omap1_clk *clk, unsigned long rate, unsigned long p_rate)
 {
+	unsigned long flags;
 	int dsor_exp;
 	u16 regval;
 
-	dsor_exp = calc_dsor_exp(clk, rate);
+	dsor_exp = calc_dsor_exp(rate, p_rate);
 	if (dsor_exp > 3)
 		dsor_exp = -EINVAL;
 	if (dsor_exp < 0)
 		return dsor_exp;
 
+	/* protect ARM_CKCTL register from concurrent access via clk_enable/disable() */
+	spin_lock_irqsave(&arm_ckctl_lock, flags);
+
 	regval = omap_readw(ARM_CKCTL);
 	regval &= ~(3 << clk->rate_offset);
 	regval |= dsor_exp << clk->rate_offset;
 	regval = verify_ckctl_value(regval);
 	omap_writew(regval, ARM_CKCTL);
-	clk->rate = clk->parent->rate / (1 << dsor_exp);
+	clk->rate = p_rate / (1 << dsor_exp);
+
+	spin_unlock_irqrestore(&arm_ckctl_lock, flags);
+
 	return 0;
 }
 
-long omap1_round_to_table_rate(struct clk *clk, unsigned long rate)
+long omap1_round_to_table_rate(struct omap1_clk *clk, unsigned long rate, unsigned long *p_rate)
 {
 	/* Find the highest supported frequency <= rate */
 	struct mpu_rate * ptr;
@@ -324,26 +372,40 @@ static unsigned calc_ext_dsor(unsigned long rate)
 }
 
 /* XXX Only needed on 1510 */
-int omap1_set_uart_rate(struct clk *clk, unsigned long rate)
+long omap1_round_uart_rate(struct omap1_clk *clk, unsigned long rate, unsigned long *p_rate)
+{
+	return rate > 24000000 ? 48000000 : 12000000;
+}
+
+int omap1_set_uart_rate(struct omap1_clk *clk, unsigned long rate, unsigned long p_rate)
 {
+	unsigned long flags;
 	unsigned int val;
 
-	val = __raw_readl(clk->enable_reg);
 	if (rate == 12000000)
-		val &= ~(1 << clk->enable_bit);
+		val = 0;
 	else if (rate == 48000000)
-		val |= (1 << clk->enable_bit);
+		val = 1 << clk->enable_bit;
 	else
 		return -EINVAL;
+
+	/* protect MOD_CONF_CTRL_0 register from concurrent access via clk_enable/disable() */
+	spin_lock_irqsave(&mod_conf_ctrl_0_lock, flags);
+
+	val |= __raw_readl(clk->enable_reg) & ~(1 << clk->enable_bit);
 	__raw_writel(val, clk->enable_reg);
+
+	spin_unlock_irqrestore(&mod_conf_ctrl_0_lock, flags);
+
 	clk->rate = rate;
 
 	return 0;
 }
 
 /* External clock (MCLK & BCLK) functions */
-int omap1_set_ext_clk_rate(struct clk *clk, unsigned long rate)
+int omap1_set_ext_clk_rate(struct omap1_clk *clk, unsigned long rate, unsigned long p_rate)
 {
+	unsigned long flags;
 	unsigned dsor;
 	__u16 ratio_bits;
 
@@ -354,25 +416,53 @@ int omap1_set_ext_clk_rate(struct clk *clk, unsigned long rate)
 	else
 		ratio_bits = (dsor - 2) << 2;
 
+	/* protect SWD_CLK_DIV_CTRL_SEL register from concurrent access via clk_enable/disable() */
+	spin_lock_irqsave(&swd_clk_div_ctrl_sel_lock, flags);
+
 	ratio_bits |= __raw_readw(clk->enable_reg) & ~0xfd;
 	__raw_writew(ratio_bits, clk->enable_reg);
 
+	spin_unlock_irqrestore(&swd_clk_div_ctrl_sel_lock, flags);
+
 	return 0;
 }
 
-int omap1_set_sossi_rate(struct clk *clk, unsigned long rate)
+static int calc_div_sossi(unsigned long rate, unsigned long p_rate)
 {
-	u32 l;
 	int div;
-	unsigned long p_rate;
 
-	p_rate = clk->parent->rate;
 	/* Round towards slower frequency */
 	div = (p_rate + rate - 1) / rate;
-	div--;
+
+	return --div;
+}
+
+long omap1_round_sossi_rate(struct omap1_clk *clk, unsigned long rate, unsigned long *p_rate)
+{
+	int div;
+
+	div = calc_div_sossi(rate, *p_rate);
+	if (div < 0)
+		div = 0;
+	else if (div > 7)
+		div = 7;
+
+	return *p_rate / (div + 1);
+}
+
+int omap1_set_sossi_rate(struct omap1_clk *clk, unsigned long rate, unsigned long p_rate)
+{
+	unsigned long flags;
+	u32 l;
+	int div;
+
+	div = calc_div_sossi(rate, p_rate);
 	if (div < 0 || div > 7)
 		return -EINVAL;
 
+	/* protect MOD_CONF_CTRL_1 register from concurrent access via clk_enable/disable() */
+	spin_lock_irqsave(&mod_conf_ctrl_1_lock, flags);
+
 	l = omap_readl(MOD_CONF_CTRL_1);
 	l &= ~(7 << 17);
 	l |= div << 17;
@@ -380,15 +470,17 @@ int omap1_set_sossi_rate(struct clk *clk, unsigned long rate)
 
 	clk->rate = p_rate / (div + 1);
 
+	spin_unlock_irqrestore(&mod_conf_ctrl_1_lock, flags);
+
 	return 0;
 }
 
-long omap1_round_ext_clk_rate(struct clk *clk, unsigned long rate)
+long omap1_round_ext_clk_rate(struct omap1_clk *clk, unsigned long rate, unsigned long *p_rate)
 {
 	return 96000000 / calc_ext_dsor(rate);
 }
 
-void omap1_init_ext_clk(struct clk *clk)
+int omap1_init_ext_clk(struct omap1_clk *clk)
 {
 	unsigned dsor;
 	__u16 ratio_bits;
@@ -404,59 +496,59 @@ void omap1_init_ext_clk(struct clk *clk)
 		dsor = ratio_bits + 2;
 
 	clk-> rate = 96000000 / dsor;
+
+	return 0;
 }
 
-int omap1_clk_enable(struct clk *clk)
+static int omap1_clk_enable(struct clk_hw *hw)
 {
+	struct omap1_clk *clk = to_omap1_clk(hw), *parent = to_omap1_clk(clk_hw_get_parent(hw));
 	int ret = 0;
 
-	if (clk->usecount++ == 0) {
-		if (clk->parent) {
-			ret = omap1_clk_enable(clk->parent);
-			if (ret)
-				goto err;
-
-			if (clk->flags & CLOCK_NO_IDLE_PARENT)
-				omap1_clk_deny_idle(clk->parent);
-		}
+	if (parent && clk->flags & CLOCK_NO_IDLE_PARENT)
+		omap1_clk_deny_idle(parent);
 
+	if (clk->ops && !(WARN_ON(!clk->ops->enable)))
 		ret = clk->ops->enable(clk);
-		if (ret) {
-			if (clk->parent)
-				omap1_clk_disable(clk->parent);
-			goto err;
-		}
-	}
-	return ret;
 
-err:
-	clk->usecount--;
 	return ret;
 }
 
-void omap1_clk_disable(struct clk *clk)
+static void omap1_clk_disable(struct clk_hw *hw)
 {
-	if (clk->usecount > 0 && !(--clk->usecount)) {
+	struct omap1_clk *clk = to_omap1_clk(hw), *parent = to_omap1_clk(clk_hw_get_parent(hw));
+
+	if (clk->ops && !(WARN_ON(!clk->ops->disable)))
 		clk->ops->disable(clk);
-		if (likely(clk->parent)) {
-			omap1_clk_disable(clk->parent);
-			if (clk->flags & CLOCK_NO_IDLE_PARENT)
-				omap1_clk_allow_idle(clk->parent);
-		}
-	}
+
+	if (likely(parent) && clk->flags & CLOCK_NO_IDLE_PARENT)
+		omap1_clk_allow_idle(parent);
 }
 
-static int omap1_clk_enable_generic(struct clk *clk)
+static int omap1_clk_enable_generic(struct omap1_clk *clk)
 {
+	unsigned long flags;
 	__u16 regval16;
 	__u32 regval32;
 
 	if (unlikely(clk->enable_reg == NULL)) {
 		printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
-		       clk->name);
+		       clk_hw_get_name(&clk->hw));
 		return -EINVAL;
 	}
 
+	/* protect clk->enable_reg from concurrent access via clk_set_rate() */
+	if (clk->enable_reg == OMAP1_IO_ADDRESS(ARM_CKCTL))
+		spin_lock_irqsave(&arm_ckctl_lock, flags);
+	else if (clk->enable_reg == OMAP1_IO_ADDRESS(ARM_IDLECT2))
+		spin_lock_irqsave(&arm_idlect2_lock, flags);
+	else if (clk->enable_reg == OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0))
+		spin_lock_irqsave(&mod_conf_ctrl_0_lock, flags);
+	else if (clk->enable_reg == OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1))
+		spin_lock_irqsave(&mod_conf_ctrl_1_lock, flags);
+	else if (clk->enable_reg == OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL))
+		spin_lock_irqsave(&swd_clk_div_ctrl_sel_lock, flags);
+
 	if (clk->flags & ENABLE_REG_32BIT) {
 		regval32 = __raw_readl(clk->enable_reg);
 		regval32 |= (1 << clk->enable_bit);
@@ -467,17 +559,41 @@ static int omap1_clk_enable_generic(struct clk *clk)
 		__raw_writew(regval16, clk->enable_reg);
 	}
 
+	if (clk->enable_reg == OMAP1_IO_ADDRESS(ARM_CKCTL))
+		spin_unlock_irqrestore(&arm_ckctl_lock, flags);
+	else if (clk->enable_reg == OMAP1_IO_ADDRESS(ARM_IDLECT2))
+		spin_unlock_irqrestore(&arm_idlect2_lock, flags);
+	else if (clk->enable_reg == OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0))
+		spin_unlock_irqrestore(&mod_conf_ctrl_0_lock, flags);
+	else if (clk->enable_reg == OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1))
+		spin_unlock_irqrestore(&mod_conf_ctrl_1_lock, flags);
+	else if (clk->enable_reg == OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL))
+		spin_unlock_irqrestore(&swd_clk_div_ctrl_sel_lock, flags);
+
 	return 0;
 }
 
-static void omap1_clk_disable_generic(struct clk *clk)
+static void omap1_clk_disable_generic(struct omap1_clk *clk)
 {
+	unsigned long flags;
 	__u16 regval16;
 	__u32 regval32;
 
 	if (clk->enable_reg == NULL)
 		return;
 
+	/* protect clk->enable_reg from concurrent access via clk_set_rate() */
+	if (clk->enable_reg == OMAP1_IO_ADDRESS(ARM_CKCTL))
+		spin_lock_irqsave(&arm_ckctl_lock, flags);
+	else if (clk->enable_reg == OMAP1_IO_ADDRESS(ARM_IDLECT2))
+		spin_lock_irqsave(&arm_idlect2_lock, flags);
+	else if (clk->enable_reg == OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0))
+		spin_lock_irqsave(&mod_conf_ctrl_0_lock, flags);
+	else if (clk->enable_reg == OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1))
+		spin_lock_irqsave(&mod_conf_ctrl_1_lock, flags);
+	else if (clk->enable_reg == OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL))
+		spin_lock_irqsave(&swd_clk_div_ctrl_sel_lock, flags);
+
 	if (clk->flags & ENABLE_REG_32BIT) {
 		regval32 = __raw_readl(clk->enable_reg);
 		regval32 &= ~(1 << clk->enable_bit);
@@ -487,6 +603,17 @@ static void omap1_clk_disable_generic(struct clk *clk)
 		regval16 &= ~(1 << clk->enable_bit);
 		__raw_writew(regval16, clk->enable_reg);
 	}
+
+	if (clk->enable_reg == OMAP1_IO_ADDRESS(ARM_CKCTL))
+		spin_unlock_irqrestore(&arm_ckctl_lock, flags);
+	else if (clk->enable_reg == OMAP1_IO_ADDRESS(ARM_IDLECT2))
+		spin_unlock_irqrestore(&arm_idlect2_lock, flags);
+	else if (clk->enable_reg == OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0))
+		spin_unlock_irqrestore(&mod_conf_ctrl_0_lock, flags);
+	else if (clk->enable_reg == OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1))
+		spin_unlock_irqrestore(&mod_conf_ctrl_1_lock, flags);
+	else if (clk->enable_reg == OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL))
+		spin_unlock_irqrestore(&swd_clk_div_ctrl_sel_lock, flags);
 }
 
 const struct clkops clkops_generic = {
@@ -494,25 +621,38 @@ const struct clkops clkops_generic = {
 	.disable	= omap1_clk_disable_generic,
 };
 
-static int omap1_clk_enable_dsp_domain(struct clk *clk)
+static int omap1_clk_enable_dsp_domain(struct omap1_clk *clk)
 {
-	int retval;
+	bool api_ck_was_enabled;
+	int retval = 0;
+
+	api_ck_was_enabled = omap1_clk_is_enabled(&api_ck_p->hw);
+	if (!api_ck_was_enabled)
+		retval = api_ck_p->ops->enable(api_ck_p);
 
-	retval = omap1_clk_enable(api_ck_p);
 	if (!retval) {
 		retval = omap1_clk_enable_generic(clk);
-		omap1_clk_disable(api_ck_p);
+
+		if (!api_ck_was_enabled)
+			api_ck_p->ops->disable(api_ck_p);
 	}
 
 	return retval;
 }
 
-static void omap1_clk_disable_dsp_domain(struct clk *clk)
+static void omap1_clk_disable_dsp_domain(struct omap1_clk *clk)
 {
-	if (omap1_clk_enable(api_ck_p) == 0) {
-		omap1_clk_disable_generic(clk);
-		omap1_clk_disable(api_ck_p);
-	}
+	bool api_ck_was_enabled;
+
+	api_ck_was_enabled = omap1_clk_is_enabled(&api_ck_p->hw);
+	if (!api_ck_was_enabled)
+		if (api_ck_p->ops->enable(api_ck_p) < 0)
+			return;
+
+	omap1_clk_disable_generic(clk);
+
+	if (!api_ck_was_enabled)
+		api_ck_p->ops->disable(api_ck_p);
 }
 
 const struct clkops clkops_dspck = {
@@ -521,7 +661,7 @@ const struct clkops clkops_dspck = {
 };
 
 /* XXX SYSC register handling does not belong in the clock framework */
-static int omap1_clk_enable_uart_functional_16xx(struct clk *clk)
+static int omap1_clk_enable_uart_functional_16xx(struct omap1_clk *clk)
 {
 	int ret;
 	struct uart_clk *uclk;
@@ -538,7 +678,7 @@ static int omap1_clk_enable_uart_functional_16xx(struct clk *clk)
 }
 
 /* XXX SYSC register handling does not belong in the clock framework */
-static void omap1_clk_disable_uart_functional_16xx(struct clk *clk)
+static void omap1_clk_disable_uart_functional_16xx(struct omap1_clk *clk)
 {
 	struct uart_clk *uclk;
 
@@ -555,20 +695,33 @@ const struct clkops clkops_uart_16xx = {
 	.disable	= omap1_clk_disable_uart_functional_16xx,
 };
 
-long omap1_clk_round_rate(struct clk *clk, unsigned long rate)
+static unsigned long omap1_clk_recalc_rate(struct clk_hw *hw, unsigned long p_rate)
 {
-	if (clk->round_rate != NULL)
-		return clk->round_rate(clk, rate);
+	struct omap1_clk *clk = to_omap1_clk(hw);
+
+	if (clk->recalc)
+		return clk->recalc(clk, p_rate);
 
 	return clk->rate;
 }
 
-int omap1_clk_set_rate(struct clk *clk, unsigned long rate)
+static long omap1_clk_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long *p_rate)
+{
+	struct omap1_clk *clk = to_omap1_clk(hw);
+
+	if (clk->round_rate != NULL)
+		return clk->round_rate(clk, rate, p_rate);
+
+	return omap1_clk_recalc_rate(hw, *p_rate);
+}
+
+static int omap1_clk_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long p_rate)
 {
+	struct omap1_clk *clk = to_omap1_clk(hw);
 	int  ret = -EINVAL;
 
 	if (clk->set_rate)
-		ret = clk->set_rate(clk, rate);
+		ret = clk->set_rate(clk, rate, p_rate);
 	return ret;
 }
 
@@ -576,340 +729,105 @@ int omap1_clk_set_rate(struct clk *clk, unsigned long rate)
  * Omap1 clock reset and init functions
  */
 
+static int omap1_clk_init_op(struct clk_hw *hw)
+{
+	struct omap1_clk *clk = to_omap1_clk(hw);
+
+	if (clk->init)
+		return clk->init(clk);
+
+	return 0;
+}
+
 #ifdef CONFIG_OMAP_RESET_CLOCKS
 
-void omap1_clk_disable_unused(struct clk *clk)
+static void omap1_clk_disable_unused(struct clk_hw *hw)
 {
-	__u32 regval32;
+	struct omap1_clk *clk = to_omap1_clk(hw);
+	const char *name = clk_hw_get_name(hw);
 
 	/* Clocks in the DSP domain need api_ck. Just assume bootloader
 	 * has not enabled any DSP clocks */
 	if (clk->enable_reg == DSP_IDLECT2) {
-		pr_info("Skipping reset check for DSP domain clock \"%s\"\n",
-			clk->name);
+		pr_info("Skipping reset check for DSP domain clock \"%s\"\n", name);
 		return;
 	}
 
-	/* Is the clock already disabled? */
-	if (clk->flags & ENABLE_REG_32BIT)
-		regval32 = __raw_readl(clk->enable_reg);
-	else
-		regval32 = __raw_readw(clk->enable_reg);
-
-	if ((regval32 & (1 << clk->enable_bit)) == 0)
-		return;
-
-	printk(KERN_INFO "Disabling unused clock \"%s\"... ", clk->name);
-	clk->ops->disable(clk);
+	pr_info("Disabling unused clock \"%s\"... ", name);
+	omap1_clk_disable(hw);
 	printk(" done\n");
 }
 
 #endif
 
+const struct clk_ops omap1_clk_gate_ops = {
+	.enable		= omap1_clk_enable,
+	.disable	= omap1_clk_disable,
+	.is_enabled	= omap1_clk_is_enabled,
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+	.disable_unused	= omap1_clk_disable_unused,
+#endif
+};
 
-int clk_enable(struct clk *clk)
-{
-	unsigned long flags;
-	int ret;
-
-	if (IS_ERR_OR_NULL(clk))
-		return -EINVAL;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	ret = omap1_clk_enable(clk);
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-	unsigned long flags;
-
-	if (IS_ERR_OR_NULL(clk))
-		return;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	if (clk->usecount == 0) {
-		pr_err("Trying disable clock %s with 0 usecount\n",
-		       clk->name);
-		WARN_ON(1);
-		goto out;
-	}
-
-	omap1_clk_disable(clk);
-
-out:
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	unsigned long flags;
-	unsigned long ret;
-
-	if (IS_ERR_OR_NULL(clk))
-		return 0;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	ret = clk->rate;
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-/*
- * Optional clock functions defined in include/linux/clk.h
- */
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long flags;
-	long ret;
-
-	if (IS_ERR_OR_NULL(clk))
-		return 0;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	ret = omap1_clk_round_rate(clk, rate);
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long flags;
-	int ret = -EINVAL;
-
-	if (IS_ERR_OR_NULL(clk))
-		return ret;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	ret = omap1_clk_set_rate(clk, rate);
-	if (ret == 0)
-		propagate_rate(clk);
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	WARN_ONCE(1, "clk_set_parent() not implemented for OMAP1\n");
-
-	return -EINVAL;
-}
-EXPORT_SYMBOL(clk_set_parent);
+const struct clk_ops omap1_clk_rate_ops = {
+	.recalc_rate	= omap1_clk_recalc_rate,
+	.round_rate	= omap1_clk_round_rate,
+	.set_rate	= omap1_clk_set_rate,
+	.init		= omap1_clk_init_op,
+};
 
-struct clk *clk_get_parent(struct clk *clk)
-{
-	return clk->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
+const struct clk_ops omap1_clk_full_ops = {
+	.enable		= omap1_clk_enable,
+	.disable	= omap1_clk_disable,
+	.is_enabled	= omap1_clk_is_enabled,
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+	.disable_unused	= omap1_clk_disable_unused,
+#endif
+	.recalc_rate	= omap1_clk_recalc_rate,
+	.round_rate	= omap1_clk_round_rate,
+	.set_rate	= omap1_clk_set_rate,
+	.init		= omap1_clk_init_op,
+};
 
 /*
  * OMAP specific clock functions shared between omap1 and omap2
  */
 
 /* Used for clocks that always have same value as the parent clock */
-unsigned long followparent_recalc(struct clk *clk)
+unsigned long followparent_recalc(struct omap1_clk *clk, unsigned long p_rate)
 {
-	return clk->parent->rate;
+	return p_rate;
 }
 
 /*
  * Used for clocks that have the same value as the parent clock,
  * divided by some factor
  */
-unsigned long omap_fixed_divisor_recalc(struct clk *clk)
+unsigned long omap_fixed_divisor_recalc(struct omap1_clk *clk, unsigned long p_rate)
 {
 	WARN_ON(!clk->fixed_div);
 
-	return clk->parent->rate / clk->fixed_div;
-}
-
-void clk_reparent(struct clk *child, struct clk *parent)
-{
-	list_del_init(&child->sibling);
-	if (parent)
-		list_add(&child->sibling, &parent->children);
-	child->parent = parent;
-
-	/* now do the debugfs renaming to reattach the child
-	   to the proper parent */
+	return p_rate / clk->fixed_div;
 }
 
 /* Propagate rate to children */
-void propagate_rate(struct clk *tclk)
-{
-	struct clk *clkp;
-
-	list_for_each_entry(clkp, &tclk->children, sibling) {
-		if (clkp->recalc)
-			clkp->rate = clkp->recalc(clkp);
-		propagate_rate(clkp);
-	}
-}
-
-static LIST_HEAD(root_clks);
-
-/**
- * recalculate_root_clocks - recalculate and propagate all root clocks
- *
- * Recalculates all root clocks (clocks with no parent), which if the
- * clock's .recalc is set correctly, should also propagate their rates.
- * Called at init.
- */
-void recalculate_root_clocks(void)
+void propagate_rate(struct omap1_clk *tclk)
 {
 	struct clk *clkp;
 
-	list_for_each_entry(clkp, &root_clks, sibling) {
-		if (clkp->recalc)
-			clkp->rate = clkp->recalc(clkp);
-		propagate_rate(clkp);
-	}
-}
-
-/**
- * clk_preinit - initialize any fields in the struct clk before clk init
- * @clk: struct clk * to initialize
- *
- * Initialize any struct clk fields needed before normal clk initialization
- * can run.  No return value.
- */
-void clk_preinit(struct clk *clk)
-{
-	INIT_LIST_HEAD(&clk->children);
-}
-
-int clk_register(struct clk *clk)
-{
-	if (IS_ERR_OR_NULL(clk))
-		return -EINVAL;
-
-	/*
-	 * trap out already registered clocks
-	 */
-	if (clk->node.next || clk->node.prev)
-		return 0;
-
-	mutex_lock(&clocks_mutex);
-	if (clk->parent)
-		list_add(&clk->sibling, &clk->parent->children);
-	else
-		list_add(&clk->sibling, &root_clks);
-
-	list_add(&clk->node, &clocks);
-	if (clk->init)
-		clk->init(clk);
-	mutex_unlock(&clocks_mutex);
-
-	return 0;
-}
-EXPORT_SYMBOL(clk_register);
-
-void clk_unregister(struct clk *clk)
-{
-	if (IS_ERR_OR_NULL(clk))
+	/* depend on CCF ability to recalculate new rates across whole clock subtree */
+	if (WARN_ON(!(clk_hw_get_flags(&tclk->hw) & CLK_GET_RATE_NOCACHE)))
 		return;
 
-	mutex_lock(&clocks_mutex);
-	list_del(&clk->sibling);
-	list_del(&clk->node);
-	mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL(clk_unregister);
-
-void clk_enable_init_clocks(void)
-{
-	struct clk *clkp;
-
-	list_for_each_entry(clkp, &clocks, node)
-		if (clkp->flags & ENABLE_ON_INIT)
-			clk_enable(clkp);
-}
-
-/**
- * omap_clk_get_by_name - locate OMAP struct clk by its name
- * @name: name of the struct clk to locate
- *
- * Locate an OMAP struct clk by its name.  Assumes that struct clk
- * names are unique.  Returns NULL if not found or a pointer to the
- * struct clk if found.
- */
-struct clk *omap_clk_get_by_name(const char *name)
-{
-	struct clk *c;
-	struct clk *ret = NULL;
-
-	mutex_lock(&clocks_mutex);
-
-	list_for_each_entry(c, &clocks, node) {
-		if (!strcmp(c->name, name)) {
-			ret = c;
-			break;
-		}
-	}
-
-	mutex_unlock(&clocks_mutex);
-
-	return ret;
-}
-
-int omap_clk_enable_autoidle_all(void)
-{
-	struct clk *c;
-	unsigned long flags;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-
-	list_for_each_entry(c, &clocks, node)
-		if (c->ops->allow_idle)
-			c->ops->allow_idle(c);
-
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-
-	return 0;
-}
-
-int omap_clk_disable_autoidle_all(void)
-{
-	struct clk *c;
-	unsigned long flags;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-
-	list_for_each_entry(c, &clocks, node)
-		if (c->ops->deny_idle)
-			c->ops->deny_idle(c);
-
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-
-	return 0;
-}
-
-/*
- * Low level helpers
- */
-static int clkll_enable_null(struct clk *clk)
-{
-	return 0;
-}
+	clkp = clk_get_sys(NULL, clk_hw_get_name(&tclk->hw));
+	if (WARN_ON(!clkp))
+		return;
 
-static void clkll_disable_null(struct clk *clk)
-{
+	clk_get_rate(clkp);
+	clk_put(clkp);
 }
 
-const struct clkops clkops_null = {
-	.enable		= clkll_enable_null,
-	.disable	= clkll_disable_null,
+const struct clk_ops omap1_clk_null_ops = {
 };
 
 /*
@@ -917,115 +835,6 @@ const struct clkops clkops_null = {
  *
  * Used for clock aliases that are needed on some OMAPs, but not others
  */
-struct clk dummy_ck = {
-	.name	= "dummy",
-	.ops	= &clkops_null,
+struct omap1_clk dummy_ck __refdata = {
+	.hw.init	= CLK_HW_INIT_NO_PARENT("dummy", &omap1_clk_null_ops, 0),
 };
-
-/*
- *
- */
-
-#ifdef CONFIG_OMAP_RESET_CLOCKS
-/*
- * Disable any unused clocks left on by the bootloader
- */
-static int __init clk_disable_unused(void)
-{
-	struct clk *ck;
-	unsigned long flags;
-
-	pr_info("clock: disabling unused clocks to save power\n");
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	list_for_each_entry(ck, &clocks, node) {
-		if (ck->ops == &clkops_null)
-			continue;
-
-		if (ck->usecount > 0 || !ck->enable_reg)
-			continue;
-
-		omap1_clk_disable_unused(ck);
-	}
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-
-	return 0;
-}
-late_initcall(clk_disable_unused);
-late_initcall(omap_clk_enable_autoidle_all);
-#endif
-
-#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
-/*
- *	debugfs support to trace clock tree hierarchy and attributes
- */
-
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-
-static struct dentry *clk_debugfs_root;
-
-static int debug_clock_show(struct seq_file *s, void *unused)
-{
-	struct clk *c;
-	struct clk *pa;
-
-	mutex_lock(&clocks_mutex);
-	seq_printf(s, "%-30s %-30s %-10s %s\n",
-		   "clock-name", "parent-name", "rate", "use-count");
-
-	list_for_each_entry(c, &clocks, node) {
-		pa = c->parent;
-		seq_printf(s, "%-30s %-30s %-10lu %d\n",
-			   c->name, pa ? pa->name : "none", c->rate,
-			   c->usecount);
-	}
-	mutex_unlock(&clocks_mutex);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(debug_clock);
-
-static void clk_debugfs_register_one(struct clk *c)
-{
-	struct dentry *d;
-	struct clk *pa = c->parent;
-
-	d = debugfs_create_dir(c->name, pa ? pa->dent : clk_debugfs_root);
-	c->dent = d;
-
-	debugfs_create_u8("usecount", S_IRUGO, c->dent, &c->usecount);
-	debugfs_create_ulong("rate", S_IRUGO, c->dent, &c->rate);
-	debugfs_create_x8("flags", S_IRUGO, c->dent, &c->flags);
-}
-
-static void clk_debugfs_register(struct clk *c)
-{
-	struct clk *pa = c->parent;
-
-	if (pa && !pa->dent)
-		clk_debugfs_register(pa);
-
-	if (!c->dent)
-		clk_debugfs_register_one(c);
-}
-
-static int __init clk_debugfs_init(void)
-{
-	struct clk *c;
-	struct dentry *d;
-
-	d = debugfs_create_dir("clock", NULL);
-	clk_debugfs_root = d;
-
-	list_for_each_entry(c, &clocks, node)
-		clk_debugfs_register(c);
-
-	debugfs_create_file("summary", S_IRUGO, d, NULL, &debug_clock_fops);
-
-	return 0;
-}
-late_initcall(clk_debugfs_init);
-
-#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index f3b8811f5ac0..16cfb2e86ee4 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -11,12 +11,11 @@
 #define __ARCH_ARM_MACH_OMAP1_CLOCK_H
 
 #include <linux/clk.h>
-#include <linux/list.h>
-
 #include <linux/clkdev.h>
+#include <linux/clk-provider.h>
 
 struct module;
-struct clk;
+struct omap1_clk;
 
 struct omap_clk {
 	u16				cpu;
@@ -29,7 +28,7 @@ struct omap_clk {
 		.lk = {			\
 			.dev_id = dev,	\
 			.con_id = con,	\
-			.clk = ck,	\
+			.clk_hw = ck,	\
 		},			\
 	}
 
@@ -40,68 +39,30 @@ struct omap_clk {
 #define CK_16XX		(1 << 3)	/* 16xx, 17xx, 5912 */
 #define CK_1710		(1 << 4)	/* 1710 extra for rate selection */
 
-
-/* Temporary, needed during the common clock framework conversion */
-#define __clk_get_name(clk)	(clk->name)
-#define __clk_get_parent(clk)	(clk->parent)
-#define __clk_get_rate(clk)	(clk->rate)
-
 /**
  * struct clkops - some clock function pointers
  * @enable: fn ptr that enables the current clock in hardware
  * @disable: fn ptr that enables the current clock in hardware
- * @find_idlest: function returning the IDLEST register for the clock's IP blk
- * @find_companion: function returning the "companion" clk reg for the clock
  * @allow_idle: fn ptr that enables autoidle for the current clock in hardware
- * @deny_idle: fn ptr that disables autoidle for the current clock in hardware
- *
- * A "companion" clk is an accompanying clock to the one being queried
- * that must be enabled for the IP module connected to the clock to
- * become accessible by the hardware.  Neither @find_idlest nor
- * @find_companion should be needed; that information is IP
- * block-specific; the hwmod code has been created to handle this, but
- * until hwmod data is ready and drivers have been converted to use PM
- * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and
- * @find_companion must, unfortunately, remain.
  */
 struct clkops {
-	int			(*enable)(struct clk *);
-	void			(*disable)(struct clk *);
-	void			(*find_idlest)(struct clk *, void __iomem **,
-					       u8 *, u8 *);
-	void			(*find_companion)(struct clk *, void __iomem **,
-						  u8 *);
-	void			(*allow_idle)(struct clk *);
-	void			(*deny_idle)(struct clk *);
+	int			(*enable)(struct omap1_clk *clk);
+	void			(*disable)(struct omap1_clk *clk);
 };
 
 /*
  * struct clk.flags possibilities
  *
  * XXX document the rest of the clock flags here
- *
- * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
- *     bits share the same register.  This flag allows the
- *     omap4_dpllmx*() code to determine which GATE_CTRL bit field
- *     should be used.  This is a temporary solution - a better approach
- *     would be to associate clock type-specific data with the clock,
- *     similar to the struct dpll_data approach.
  */
 #define ENABLE_REG_32BIT	(1 << 0)	/* Use 32-bit access */
 #define CLOCK_IDLE_CONTROL	(1 << 1)
 #define CLOCK_NO_IDLE_PARENT	(1 << 2)
-#define ENABLE_ON_INIT		(1 << 3)	/* Enable upon framework init */
-#define INVERT_ENABLE		(1 << 4)	/* 0 enables, 1 disables */
-#define CLOCK_CLKOUTX2		(1 << 5)
 
 /**
- * struct clk - OMAP struct clk
- * @node: list_head connecting this clock into the full clock list
+ * struct omap1_clk - OMAP1 struct clk
+ * @hw: struct clk_hw for common clock framework integration
  * @ops: struct clkops * for this clock
- * @name: the name of the clock in the hardware (used in hwmod data and debug)
- * @parent: pointer to this clock's parent struct clk
- * @children: list_head connecting to the child clks' @sibling list_heads
- * @sibling: list_head connecting this clk to its parent clk's @children
  * @rate: current clock rate
  * @enable_reg: register to write to enable the clock (see @enable_bit)
  * @recalc: fn ptr that returns the clock's current rate
@@ -109,123 +70,65 @@ struct clkops {
  * @round_rate: fn ptr that can round the clock's current rate
  * @init: fn ptr to do clock-specific initialization
  * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
- * @usecount: number of users that have requested this clock to be enabled
  * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div
  * @flags: see "struct clk.flags possibilities" above
  * @rate_offset: bitshift for rate selection bitfield (OMAP1 only)
- * @src_offset: bitshift for source selection bitfield (OMAP1 only)
- *
- * XXX @rate_offset, @src_offset should probably be removed and OMAP1
- * clock code converted to use clksel.
- *
- * XXX @usecount is poorly named.  It should be "enable_count" or
- * something similar.  "users" in the description refers to kernel
- * code (core code or drivers) that have called clk_enable() and not
- * yet called clk_disable(); the usecount of parent clocks is also
- * incremented by the clock code when clk_enable() is called on child
- * clocks and decremented by the clock code when clk_disable() is
- * called on child clocks.
- *
- * XXX @clkdm, @usecount, @children, @sibling should be marked for
- * internal use only.
- *
- * @children and @sibling are used to optimize parent-to-child clock
- * tree traversals.  (child-to-parent traversals use @parent.)
- *
- * XXX The notion of the clock's current rate probably needs to be
- * separated from the clock's target rate.
  */
-struct clk {
-	struct list_head	node;
+struct omap1_clk {
+	struct clk_hw		hw;
 	const struct clkops	*ops;
-	const char		*name;
-	struct clk		*parent;
-	struct list_head	children;
-	struct list_head	sibling;	/* node for children */
 	unsigned long		rate;
 	void __iomem		*enable_reg;
-	unsigned long		(*recalc)(struct clk *);
-	int			(*set_rate)(struct clk *, unsigned long);
-	long			(*round_rate)(struct clk *, unsigned long);
-	void			(*init)(struct clk *);
+	unsigned long		(*recalc)(struct omap1_clk *clk, unsigned long rate);
+	int			(*set_rate)(struct omap1_clk *clk, unsigned long rate,
+					    unsigned long p_rate);
+	long			(*round_rate)(struct omap1_clk *clk, unsigned long rate,
+					      unsigned long *p_rate);
+	int			(*init)(struct omap1_clk *clk);
 	u8			enable_bit;
-	s8			usecount;
 	u8			fixed_div;
 	u8			flags;
 	u8			rate_offset;
-	u8			src_offset;
-#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
-	struct dentry		*dent;	/* For visible tree hierarchy */
-#endif
-};
-
-struct clk_functions {
-	int		(*clk_enable)(struct clk *clk);
-	void		(*clk_disable)(struct clk *clk);
-	long		(*clk_round_rate)(struct clk *clk, unsigned long rate);
-	int		(*clk_set_rate)(struct clk *clk, unsigned long rate);
-	int		(*clk_set_parent)(struct clk *clk, struct clk *parent);
-	void		(*clk_allow_idle)(struct clk *clk);
-	void		(*clk_deny_idle)(struct clk *clk);
-	void		(*clk_disable_unused)(struct clk *clk);
 };
+#define to_omap1_clk(_hw)	container_of(_hw, struct omap1_clk, hw)
 
-extern int clk_init(struct clk_functions *custom_clocks);
-extern void clk_preinit(struct clk *clk);
-extern int clk_register(struct clk *clk);
-extern void clk_reparent(struct clk *child, struct clk *parent);
-extern void clk_unregister(struct clk *clk);
-extern void propagate_rate(struct clk *clk);
-extern void recalculate_root_clocks(void);
-extern unsigned long followparent_recalc(struct clk *clk);
-extern void clk_enable_init_clocks(void);
-unsigned long omap_fixed_divisor_recalc(struct clk *clk);
-extern struct clk *omap_clk_get_by_name(const char *name);
-extern int omap_clk_enable_autoidle_all(void);
-extern int omap_clk_disable_autoidle_all(void);
+void propagate_rate(struct omap1_clk *clk);
+unsigned long followparent_recalc(struct omap1_clk *clk, unsigned long p_rate);
+unsigned long omap_fixed_divisor_recalc(struct omap1_clk *clk, unsigned long p_rate);
 
-extern const struct clkops clkops_null;
-
-extern struct clk dummy_ck;
+extern struct omap1_clk dummy_ck;
 
 int omap1_clk_init(void);
 void omap1_clk_late_init(void);
-extern int omap1_clk_enable(struct clk *clk);
-extern void omap1_clk_disable(struct clk *clk);
-extern long omap1_clk_round_rate(struct clk *clk, unsigned long rate);
-extern int omap1_clk_set_rate(struct clk *clk, unsigned long rate);
-extern unsigned long omap1_ckctl_recalc(struct clk *clk);
-extern int omap1_set_sossi_rate(struct clk *clk, unsigned long rate);
-extern unsigned long omap1_sossi_recalc(struct clk *clk);
-extern unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk);
-extern int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate);
-extern int omap1_set_uart_rate(struct clk *clk, unsigned long rate);
-extern unsigned long omap1_uart_recalc(struct clk *clk);
-extern int omap1_set_ext_clk_rate(struct clk *clk, unsigned long rate);
-extern long omap1_round_ext_clk_rate(struct clk *clk, unsigned long rate);
-extern void omap1_init_ext_clk(struct clk *clk);
-extern int omap1_select_table_rate(struct clk *clk, unsigned long rate);
-extern long omap1_round_to_table_rate(struct clk *clk, unsigned long rate);
-extern int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate);
-extern long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate);
-extern unsigned long omap1_watchdog_recalc(struct clk *clk);
-
-#ifdef CONFIG_OMAP_RESET_CLOCKS
-extern void omap1_clk_disable_unused(struct clk *clk);
-#else
-#define omap1_clk_disable_unused	NULL
-#endif
+unsigned long omap1_ckctl_recalc(struct omap1_clk *clk, unsigned long p_rate);
+long omap1_round_sossi_rate(struct omap1_clk *clk, unsigned long rate, unsigned long *p_rate);
+int omap1_set_sossi_rate(struct omap1_clk *clk, unsigned long rate, unsigned long p_rate);
+unsigned long omap1_sossi_recalc(struct omap1_clk *clk, unsigned long p_rate);
+unsigned long omap1_ckctl_recalc_dsp_domain(struct omap1_clk *clk, unsigned long p_rate);
+int omap1_clk_set_rate_dsp_domain(struct omap1_clk *clk, unsigned long rate,
+				  unsigned long p_rate);
+long omap1_round_uart_rate(struct omap1_clk *clk, unsigned long rate, unsigned long *p_rate);
+int omap1_set_uart_rate(struct omap1_clk *clk, unsigned long rate, unsigned long p_rate);
+unsigned long omap1_uart_recalc(struct omap1_clk *clk, unsigned long p_rate);
+int omap1_set_ext_clk_rate(struct omap1_clk *clk, unsigned long rate, unsigned long p_rate);
+long omap1_round_ext_clk_rate(struct omap1_clk *clk, unsigned long rate, unsigned long *p_rate);
+int omap1_init_ext_clk(struct omap1_clk *clk);
+int omap1_select_table_rate(struct omap1_clk *clk, unsigned long rate, unsigned long p_rate);
+long omap1_round_to_table_rate(struct omap1_clk *clk, unsigned long rate, unsigned long *p_rate);
+int omap1_clk_set_rate_ckctl_arm(struct omap1_clk *clk, unsigned long rate, unsigned long p_rate);
+long omap1_clk_round_rate_ckctl_arm(struct omap1_clk *clk, unsigned long rate,
+				    unsigned long *p_rate);
 
 struct uart_clk {
-	struct clk	clk;
-	unsigned long	sysc_addr;
+	struct omap1_clk	clk;
+	unsigned long		sysc_addr;
 };
 
 /* Provide a method for preventing idling some ARM IDLECT clocks */
 struct arm_idlect1_clk {
-	struct clk	clk;
-	unsigned long	no_idle_count;
-	__u8		idlect_shift;
+	struct omap1_clk	clk;
+	unsigned long		no_idle_count;
+	__u8			idlect_shift;
 };
 
 /* ARM_CKCTL bit shifts */
@@ -275,14 +178,18 @@ struct arm_idlect1_clk {
 #define SOFT_REQ_REG2		0xfffe0880
 
 extern __u32 arm_idlect1_mask;
-extern struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p;
+extern struct omap1_clk *api_ck_p, *ck_dpll1_p, *ck_ref_p;
 
 extern const struct clkops clkops_dspck;
-extern const struct clkops clkops_dummy;
 extern const struct clkops clkops_uart_16xx;
 extern const struct clkops clkops_generic;
 
 /* used for passing SoC type to omap1_{select,round_to}_table_rate() */
 extern u32 cpu_mask;
 
+extern const struct clk_ops omap1_clk_null_ops;
+extern const struct clk_ops omap1_clk_gate_ops;
+extern const struct clk_ops omap1_clk_rate_ops;
+extern const struct clk_ops omap1_clk_full_ops;
+
 #endif
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index 3ebcd96efbff..96d846c37c43 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -14,16 +14,17 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 #include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
 #include <linux/cpufreq.h>
 #include <linux/delay.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #include <asm/mach-types.h>  /* for machine_is_* */
 
 #include "soc.h"
-
-#include <mach/hardware.h>
-#include <mach/usb.h>   /* for OTG_BASE */
-
+#include "hardware.h"
+#include "usb.h"   /* for OTG_BASE */
 #include "iomap.h"
 #include "clock.h"
 #include "sram.h"
@@ -72,16 +73,18 @@
  * Omap1 clocks
  */
 
-static struct clk ck_ref = {
-	.name		= "ck_ref",
-	.ops		= &clkops_null,
+static struct omap1_clk ck_ref = {
+	.hw.init	= CLK_HW_INIT_NO_PARENT("ck_ref", &omap1_clk_rate_ops, 0),
 	.rate		= 12000000,
 };
 
-static struct clk ck_dpll1 = {
-	.name		= "ck_dpll1",
-	.ops		= &clkops_null,
-	.parent		= &ck_ref,
+static struct omap1_clk ck_dpll1 = {
+	.hw.init	= CLK_HW_INIT("ck_dpll1", "ck_ref", &omap1_clk_rate_ops,
+				      /*
+				       * force recursive refresh of rates of the clock
+				       * and its children when clk_get_rate() is called
+				       */
+				      CLK_GET_RATE_NOCACHE),
 };
 
 /*
@@ -90,33 +93,28 @@ static struct clk ck_dpll1 = {
  */
 static struct arm_idlect1_clk ck_dpll1out = {
 	.clk = {
-		.name		= "ck_dpll1out",
+		.hw.init	= CLK_HW_INIT("ck_dpll1out", "ck_dpll1", &omap1_clk_gate_ops, 0),
 		.ops		= &clkops_generic,
-		.parent		= &ck_dpll1,
-		.flags		= CLOCK_IDLE_CONTROL | ENABLE_REG_32BIT |
-				  ENABLE_ON_INIT,
+		.flags		= CLOCK_IDLE_CONTROL | ENABLE_REG_32BIT,
 		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
 		.enable_bit	= EN_CKOUT_ARM,
-		.recalc		= &followparent_recalc,
 	},
 	.idlect_shift	= IDL_CLKOUT_ARM_SHIFT,
 };
 
-static struct clk sossi_ck = {
-	.name		= "ck_sossi",
+static struct omap1_clk sossi_ck = {
+	.hw.init	= CLK_HW_INIT("ck_sossi", "ck_dpll1out", &omap1_clk_full_ops, 0),
 	.ops		= &clkops_generic,
-	.parent		= &ck_dpll1out.clk,
 	.flags		= CLOCK_NO_IDLE_PARENT | ENABLE_REG_32BIT,
 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1),
 	.enable_bit	= CONF_MOD_SOSSI_CLK_EN_R,
 	.recalc		= &omap1_sossi_recalc,
+	.round_rate	= &omap1_round_sossi_rate,
 	.set_rate	= &omap1_set_sossi_rate,
 };
 
-static struct clk arm_ck = {
-	.name		= "arm_ck",
-	.ops		= &clkops_null,
-	.parent		= &ck_dpll1,
+static struct omap1_clk arm_ck = {
+	.hw.init	= CLK_HW_INIT("arm_ck", "ck_dpll1", &omap1_clk_rate_ops, 0),
 	.rate_offset	= CKCTL_ARMDIV_OFFSET,
 	.recalc		= &omap1_ckctl_recalc,
 	.round_rate	= omap1_clk_round_rate_ckctl_arm,
@@ -125,9 +123,9 @@ static struct clk arm_ck = {
 
 static struct arm_idlect1_clk armper_ck = {
 	.clk = {
-		.name		= "armper_ck",
+		.hw.init	= CLK_HW_INIT("armper_ck", "ck_dpll1", &omap1_clk_full_ops,
+					      CLK_IS_CRITICAL),
 		.ops		= &clkops_generic,
-		.parent		= &ck_dpll1,
 		.flags		= CLOCK_IDLE_CONTROL,
 		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
 		.enable_bit	= EN_PERCK,
@@ -143,47 +141,41 @@ static struct arm_idlect1_clk armper_ck = {
  * FIXME: This clock seems to be necessary but no-one has asked for its
  * activation.  [ GPIO code for 1510 ]
  */
-static struct clk arm_gpio_ck = {
-	.name		= "ick",
+static struct omap1_clk arm_gpio_ck = {
+	.hw.init	= CLK_HW_INIT("ick", "ck_dpll1", &omap1_clk_gate_ops, CLK_IS_CRITICAL),
 	.ops		= &clkops_generic,
-	.parent		= &ck_dpll1,
-	.flags		= ENABLE_ON_INIT,
 	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
 	.enable_bit	= EN_GPIOCK,
-	.recalc		= &followparent_recalc,
 };
 
 static struct arm_idlect1_clk armxor_ck = {
 	.clk = {
-		.name		= "armxor_ck",
+		.hw.init	= CLK_HW_INIT("armxor_ck", "ck_ref", &omap1_clk_gate_ops,
+					      CLK_IS_CRITICAL),
 		.ops		= &clkops_generic,
-		.parent		= &ck_ref,
 		.flags		= CLOCK_IDLE_CONTROL,
 		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
 		.enable_bit	= EN_XORPCK,
-		.recalc		= &followparent_recalc,
 	},
 	.idlect_shift	= IDLXORP_ARM_SHIFT,
 };
 
 static struct arm_idlect1_clk armtim_ck = {
 	.clk = {
-		.name		= "armtim_ck",
+		.hw.init	= CLK_HW_INIT("armtim_ck", "ck_ref", &omap1_clk_gate_ops,
+					      CLK_IS_CRITICAL),
 		.ops		= &clkops_generic,
-		.parent		= &ck_ref,
 		.flags		= CLOCK_IDLE_CONTROL,
 		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
 		.enable_bit	= EN_TIMCK,
-		.recalc		= &followparent_recalc,
 	},
 	.idlect_shift	= IDLTIM_ARM_SHIFT,
 };
 
 static struct arm_idlect1_clk armwdt_ck = {
 	.clk = {
-		.name		= "armwdt_ck",
+		.hw.init	= CLK_HW_INIT("armwdt_ck", "ck_ref", &omap1_clk_full_ops, 0),
 		.ops		= &clkops_generic,
-		.parent		= &ck_ref,
 		.flags		= CLOCK_IDLE_CONTROL,
 		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
 		.enable_bit	= EN_WDTCK,
@@ -193,11 +185,8 @@ static struct arm_idlect1_clk armwdt_ck = {
 	.idlect_shift	= IDLWDT_ARM_SHIFT,
 };
 
-static struct clk arminth_ck16xx = {
-	.name		= "arminth_ck",
-	.ops		= &clkops_null,
-	.parent		= &arm_ck,
-	.recalc		= &followparent_recalc,
+static struct omap1_clk arminth_ck16xx = {
+	.hw.init	= CLK_HW_INIT("arminth_ck", "arm_ck", &omap1_clk_null_ops, 0),
 	/* Note: On 16xx the frequency can be divided by 2 by programming
 	 * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1
 	 *
@@ -205,10 +194,9 @@ static struct clk arminth_ck16xx = {
 	 */
 };
 
-static struct clk dsp_ck = {
-	.name		= "dsp_ck",
+static struct omap1_clk dsp_ck = {
+	.hw.init	= CLK_HW_INIT("dsp_ck", "ck_dpll1", &omap1_clk_full_ops, 0),
 	.ops		= &clkops_generic,
-	.parent		= &ck_dpll1,
 	.enable_reg	= OMAP1_IO_ADDRESS(ARM_CKCTL),
 	.enable_bit	= EN_DSPCK,
 	.rate_offset	= CKCTL_DSPDIV_OFFSET,
@@ -217,20 +205,17 @@ static struct clk dsp_ck = {
 	.set_rate	= omap1_clk_set_rate_ckctl_arm,
 };
 
-static struct clk dspmmu_ck = {
-	.name		= "dspmmu_ck",
-	.ops		= &clkops_null,
-	.parent		= &ck_dpll1,
+static struct omap1_clk dspmmu_ck = {
+	.hw.init	= CLK_HW_INIT("dspmmu_ck", "ck_dpll1", &omap1_clk_rate_ops, 0),
 	.rate_offset	= CKCTL_DSPMMUDIV_OFFSET,
 	.recalc		= &omap1_ckctl_recalc,
 	.round_rate	= omap1_clk_round_rate_ckctl_arm,
 	.set_rate	= omap1_clk_set_rate_ckctl_arm,
 };
 
-static struct clk dspper_ck = {
-	.name		= "dspper_ck",
+static struct omap1_clk dspper_ck = {
+	.hw.init	= CLK_HW_INIT("dspper_ck", "ck_dpll1", &omap1_clk_full_ops, 0),
 	.ops		= &clkops_dspck,
-	.parent		= &ck_dpll1,
 	.enable_reg	= DSP_IDLECT2,
 	.enable_bit	= EN_PERCK,
 	.rate_offset	= CKCTL_PERDIV_OFFSET,
@@ -239,29 +224,23 @@ static struct clk dspper_ck = {
 	.set_rate	= &omap1_clk_set_rate_dsp_domain,
 };
 
-static struct clk dspxor_ck = {
-	.name		= "dspxor_ck",
+static struct omap1_clk dspxor_ck = {
+	.hw.init	= CLK_HW_INIT("dspxor_ck", "ck_ref", &omap1_clk_gate_ops, 0),
 	.ops		= &clkops_dspck,
-	.parent		= &ck_ref,
 	.enable_reg	= DSP_IDLECT2,
 	.enable_bit	= EN_XORPCK,
-	.recalc		= &followparent_recalc,
 };
 
-static struct clk dsptim_ck = {
-	.name		= "dsptim_ck",
+static struct omap1_clk dsptim_ck = {
+	.hw.init	= CLK_HW_INIT("dsptim_ck", "ck_ref", &omap1_clk_gate_ops, 0),
 	.ops		= &clkops_dspck,
-	.parent		= &ck_ref,
 	.enable_reg	= DSP_IDLECT2,
 	.enable_bit	= EN_DSPTIMCK,
-	.recalc		= &followparent_recalc,
 };
 
 static struct arm_idlect1_clk tc_ck = {
 	.clk = {
-		.name		= "tc_ck",
-		.ops		= &clkops_null,
-		.parent		= &ck_dpll1,
+		.hw.init	= CLK_HW_INIT("tc_ck", "ck_dpll1", &omap1_clk_rate_ops, 0),
 		.flags		= CLOCK_IDLE_CONTROL,
 		.rate_offset	= CKCTL_TCDIV_OFFSET,
 		.recalc		= &omap1_ckctl_recalc,
@@ -271,117 +250,88 @@ static struct arm_idlect1_clk tc_ck = {
 	.idlect_shift	= IDLIF_ARM_SHIFT,
 };
 
-static struct clk arminth_ck1510 = {
-	.name		= "arminth_ck",
-	.ops		= &clkops_null,
-	.parent		= &tc_ck.clk,
-	.recalc		= &followparent_recalc,
+static struct omap1_clk arminth_ck1510 = {
+	.hw.init	= CLK_HW_INIT("arminth_ck", "tc_ck", &omap1_clk_null_ops, 0),
 	/* Note: On 1510 the frequency follows TC_CK
 	 *
 	 * 16xx version is in MPU clocks.
 	 */
 };
 
-static struct clk tipb_ck = {
+static struct omap1_clk tipb_ck = {
 	/* No-idle controlled by "tc_ck" */
-	.name		= "tipb_ck",
-	.ops		= &clkops_null,
-	.parent		= &tc_ck.clk,
-	.recalc		= &followparent_recalc,
+	.hw.init	= CLK_HW_INIT("tipb_ck", "tc_ck", &omap1_clk_null_ops, 0),
 };
 
-static struct clk l3_ocpi_ck = {
+static struct omap1_clk l3_ocpi_ck = {
 	/* No-idle controlled by "tc_ck" */
-	.name		= "l3_ocpi_ck",
+	.hw.init	= CLK_HW_INIT("l3_ocpi_ck", "tc_ck", &omap1_clk_gate_ops, 0),
 	.ops		= &clkops_generic,
-	.parent		= &tc_ck.clk,
 	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT3),
 	.enable_bit	= EN_OCPI_CK,
-	.recalc		= &followparent_recalc,
 };
 
-static struct clk tc1_ck = {
-	.name		= "tc1_ck",
+static struct omap1_clk tc1_ck = {
+	.hw.init	= CLK_HW_INIT("tc1_ck", "tc_ck", &omap1_clk_gate_ops, 0),
 	.ops		= &clkops_generic,
-	.parent		= &tc_ck.clk,
 	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT3),
 	.enable_bit	= EN_TC1_CK,
-	.recalc		= &followparent_recalc,
 };
 
 /*
  * FIXME: This clock seems to be necessary but no-one has asked for its
  * activation.  [ pm.c (SRAM), CCP, Camera ]
  */
-static struct clk tc2_ck = {
-	.name		= "tc2_ck",
+
+static struct omap1_clk tc2_ck = {
+	.hw.init	= CLK_HW_INIT("tc2_ck", "tc_ck", &omap1_clk_gate_ops, CLK_IS_CRITICAL),
 	.ops		= &clkops_generic,
-	.parent		= &tc_ck.clk,
-	.flags		= ENABLE_ON_INIT,
 	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT3),
 	.enable_bit	= EN_TC2_CK,
-	.recalc		= &followparent_recalc,
 };
 
-static struct clk dma_ck = {
+static struct omap1_clk dma_ck = {
 	/* No-idle controlled by "tc_ck" */
-	.name		= "dma_ck",
-	.ops		= &clkops_null,
-	.parent		= &tc_ck.clk,
-	.recalc		= &followparent_recalc,
+	.hw.init	= CLK_HW_INIT("dma_ck", "tc_ck", &omap1_clk_null_ops, 0),
 };
 
-static struct clk dma_lcdfree_ck = {
-	.name		= "dma_lcdfree_ck",
-	.ops		= &clkops_null,
-	.parent		= &tc_ck.clk,
-	.recalc		= &followparent_recalc,
+static struct omap1_clk dma_lcdfree_ck = {
+	.hw.init	= CLK_HW_INIT("dma_lcdfree_ck", "tc_ck", &omap1_clk_null_ops, 0),
 };
 
 static struct arm_idlect1_clk api_ck = {
 	.clk = {
-		.name		= "api_ck",
+		.hw.init	= CLK_HW_INIT("api_ck", "tc_ck", &omap1_clk_gate_ops, 0),
 		.ops		= &clkops_generic,
-		.parent		= &tc_ck.clk,
 		.flags		= CLOCK_IDLE_CONTROL,
 		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
 		.enable_bit	= EN_APICK,
-		.recalc		= &followparent_recalc,
 	},
 	.idlect_shift	= IDLAPI_ARM_SHIFT,
 };
 
 static struct arm_idlect1_clk lb_ck = {
 	.clk = {
-		.name		= "lb_ck",
+		.hw.init	= CLK_HW_INIT("lb_ck", "tc_ck", &omap1_clk_gate_ops, 0),
 		.ops		= &clkops_generic,
-		.parent		= &tc_ck.clk,
 		.flags		= CLOCK_IDLE_CONTROL,
 		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
 		.enable_bit	= EN_LBCK,
-		.recalc		= &followparent_recalc,
 	},
 	.idlect_shift	= IDLLB_ARM_SHIFT,
 };
 
-static struct clk rhea1_ck = {
-	.name		= "rhea1_ck",
-	.ops		= &clkops_null,
-	.parent		= &tc_ck.clk,
-	.recalc		= &followparent_recalc,
+static struct omap1_clk rhea1_ck = {
+	.hw.init	= CLK_HW_INIT("rhea1_ck", "tc_ck", &omap1_clk_null_ops, 0),
 };
 
-static struct clk rhea2_ck = {
-	.name		= "rhea2_ck",
-	.ops		= &clkops_null,
-	.parent		= &tc_ck.clk,
-	.recalc		= &followparent_recalc,
+static struct omap1_clk rhea2_ck = {
+	.hw.init	= CLK_HW_INIT("rhea2_ck", "tc_ck", &omap1_clk_null_ops, 0),
 };
 
-static struct clk lcd_ck_16xx = {
-	.name		= "lcd_ck",
+static struct omap1_clk lcd_ck_16xx = {
+	.hw.init	= CLK_HW_INIT("lcd_ck", "ck_dpll1", &omap1_clk_full_ops, 0),
 	.ops		= &clkops_generic,
-	.parent		= &ck_dpll1,
 	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
 	.enable_bit	= EN_LCDCK,
 	.rate_offset	= CKCTL_LCDDIV_OFFSET,
@@ -392,9 +342,8 @@ static struct clk lcd_ck_16xx = {
 
 static struct arm_idlect1_clk lcd_ck_1510 = {
 	.clk = {
-		.name		= "lcd_ck",
+		.hw.init	= CLK_HW_INIT("lcd_ck", "ck_dpll1", &omap1_clk_full_ops, 0),
 		.ops		= &clkops_generic,
-		.parent		= &ck_dpll1,
 		.flags		= CLOCK_IDLE_CONTROL,
 		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
 		.enable_bit	= EN_LCDCK,
@@ -406,37 +355,35 @@ static struct arm_idlect1_clk lcd_ck_1510 = {
 	.idlect_shift	= OMAP1510_IDLLCD_ARM_SHIFT,
 };
 
+
 /*
  * XXX The enable_bit here is misused - it simply switches between 12MHz
- * and 48MHz.  Reimplement with clksel.
+ * and 48MHz.  Reimplement with clk_mux.
  *
  * XXX does this need SYSC register handling?
  */
-static struct clk uart1_1510 = {
-	.name		= "uart1_ck",
-	.ops		= &clkops_null,
+static struct omap1_clk uart1_1510 = {
 	/* Direct from ULPD, no real parent */
-	.parent		= &armper_ck.clk,
-	.rate		= 12000000,
+	.hw.init	= CLK_HW_INIT("uart1_ck", "armper_ck", &omap1_clk_full_ops, 0),
 	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
 	.enable_bit	= CONF_MOD_UART1_CLK_MODE_R,
+	.round_rate	= &omap1_round_uart_rate,
 	.set_rate	= &omap1_set_uart_rate,
 	.recalc		= &omap1_uart_recalc,
 };
 
 /*
  * XXX The enable_bit here is misused - it simply switches between 12MHz
- * and 48MHz.  Reimplement with clksel.
+ * and 48MHz.  Reimplement with clk_mux.
  *
  * XXX SYSC register handling does not belong in the clock framework
  */
 static struct uart_clk uart1_16xx = {
 	.clk	= {
-		.name		= "uart1_ck",
 		.ops		= &clkops_uart_16xx,
 		/* Direct from ULPD, no real parent */
-		.parent		= &armper_ck.clk,
+		.hw.init	= CLK_HW_INIT("uart1_ck", "armper_ck", &omap1_clk_full_ops, 0),
 		.rate		= 48000000,
 		.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 		.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
@@ -447,54 +394,49 @@ static struct uart_clk uart1_16xx = {
 
 /*
  * XXX The enable_bit here is misused - it simply switches between 12MHz
- * and 48MHz.  Reimplement with clksel.
+ * and 48MHz.  Reimplement with clk_mux.
  *
  * XXX does this need SYSC register handling?
  */
-static struct clk uart2_ck = {
-	.name		= "uart2_ck",
-	.ops		= &clkops_null,
+static struct omap1_clk uart2_ck = {
 	/* Direct from ULPD, no real parent */
-	.parent		= &armper_ck.clk,
-	.rate		= 12000000,
+	.hw.init	= CLK_HW_INIT("uart2_ck", "armper_ck", &omap1_clk_full_ops, 0),
 	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
 	.enable_bit	= CONF_MOD_UART2_CLK_MODE_R,
+	.round_rate	= &omap1_round_uart_rate,
 	.set_rate	= &omap1_set_uart_rate,
 	.recalc		= &omap1_uart_recalc,
 };
 
 /*
  * XXX The enable_bit here is misused - it simply switches between 12MHz
- * and 48MHz.  Reimplement with clksel.
+ * and 48MHz.  Reimplement with clk_mux.
  *
  * XXX does this need SYSC register handling?
  */
-static struct clk uart3_1510 = {
-	.name		= "uart3_ck",
-	.ops		= &clkops_null,
+static struct omap1_clk uart3_1510 = {
 	/* Direct from ULPD, no real parent */
-	.parent		= &armper_ck.clk,
-	.rate		= 12000000,
+	.hw.init	= CLK_HW_INIT("uart3_ck", "armper_ck", &omap1_clk_full_ops, 0),
 	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
 	.enable_bit	= CONF_MOD_UART3_CLK_MODE_R,
+	.round_rate	= &omap1_round_uart_rate,
 	.set_rate	= &omap1_set_uart_rate,
 	.recalc		= &omap1_uart_recalc,
 };
 
 /*
  * XXX The enable_bit here is misused - it simply switches between 12MHz
- * and 48MHz.  Reimplement with clksel.
+ * and 48MHz.  Reimplement with clk_mux.
  *
  * XXX SYSC register handling does not belong in the clock framework
  */
 static struct uart_clk uart3_16xx = {
 	.clk	= {
-		.name		= "uart3_ck",
 		.ops		= &clkops_uart_16xx,
 		/* Direct from ULPD, no real parent */
-		.parent		= &armper_ck.clk,
+		.hw.init	= CLK_HW_INIT("uart3_ck", "armper_ck", &omap1_clk_full_ops, 0),
 		.rate		= 48000000,
 		.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 		.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
@@ -503,30 +445,30 @@ static struct uart_clk uart3_16xx = {
 	.sysc_addr	= 0xfffb9854,
 };
 
-static struct clk usb_clko = {	/* 6 MHz output on W4_USB_CLKO */
-	.name		= "usb_clko",
+static struct omap1_clk usb_clko = {	/* 6 MHz output on W4_USB_CLKO */
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent */
+	.hw.init	= CLK_HW_INIT_NO_PARENT("usb_clko", &omap1_clk_full_ops, 0),
 	.rate		= 6000000,
 	.flags		= ENABLE_REG_32BIT,
 	.enable_reg	= OMAP1_IO_ADDRESS(ULPD_CLOCK_CTRL),
 	.enable_bit	= USB_MCLK_EN_BIT,
 };
 
-static struct clk usb_hhc_ck1510 = {
-	.name		= "usb_hhc_ck",
+static struct omap1_clk usb_hhc_ck1510 = {
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent */
+	.hw.init	= CLK_HW_INIT_NO_PARENT("usb_hhc_ck", &omap1_clk_full_ops, 0),
 	.rate		= 48000000, /* Actually 2 clocks, 12MHz and 48MHz */
 	.flags		= ENABLE_REG_32BIT,
 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
 	.enable_bit	= USB_HOST_HHC_UHOST_EN,
 };
 
-static struct clk usb_hhc_ck16xx = {
-	.name		= "usb_hhc_ck",
+static struct omap1_clk usb_hhc_ck16xx = {
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent */
+	.hw.init	= CLK_HW_INIT_NO_PARENT("usb_hhc_ck", &omap1_clk_full_ops, 0),
 	.rate		= 48000000,
 	/* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */
 	.flags		= ENABLE_REG_32BIT,
@@ -534,46 +476,46 @@ static struct clk usb_hhc_ck16xx = {
 	.enable_bit	= OTG_SYSCON_2_UHOST_EN_SHIFT
 };
 
-static struct clk usb_dc_ck = {
-	.name		= "usb_dc_ck",
+static struct omap1_clk usb_dc_ck = {
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent */
+	.hw.init	= CLK_HW_INIT_NO_PARENT("usb_dc_ck", &omap1_clk_full_ops, 0),
 	.rate		= 48000000,
 	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
 	.enable_bit	= SOFT_USB_OTG_DPLL_REQ_SHIFT,
 };
 
-static struct clk uart1_7xx = {
-	.name		= "uart1_ck",
+static struct omap1_clk uart1_7xx = {
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent */
+	.hw.init	= CLK_HW_INIT_NO_PARENT("uart1_ck", &omap1_clk_full_ops, 0),
 	.rate		= 12000000,
 	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
 	.enable_bit	= 9,
 };
 
-static struct clk uart2_7xx = {
-	.name		= "uart2_ck",
+static struct omap1_clk uart2_7xx = {
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent */
+	.hw.init	= CLK_HW_INIT_NO_PARENT("uart2_ck", &omap1_clk_full_ops, 0),
 	.rate		= 12000000,
 	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
 	.enable_bit	= 11,
 };
 
-static struct clk mclk_1510 = {
-	.name		= "mclk",
+static struct omap1_clk mclk_1510 = {
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
+	.hw.init	= CLK_HW_INIT_NO_PARENT("mclk", &omap1_clk_full_ops, 0),
 	.rate		= 12000000,
 	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
 	.enable_bit	= SOFT_COM_MCKO_REQ_SHIFT,
 };
 
-static struct clk mclk_16xx = {
-	.name		= "mclk",
+static struct omap1_clk mclk_16xx = {
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
+	.hw.init	= CLK_HW_INIT_NO_PARENT("mclk", &omap1_clk_full_ops, 0),
 	.enable_reg	= OMAP1_IO_ADDRESS(COM_CLK_DIV_CTRL_SEL),
 	.enable_bit	= COM_ULPD_PLL_CLK_REQ,
 	.set_rate	= &omap1_set_ext_clk_rate,
@@ -581,17 +523,16 @@ static struct clk mclk_16xx = {
 	.init		= &omap1_init_ext_clk,
 };
 
-static struct clk bclk_1510 = {
-	.name		= "bclk",
-	.ops		= &clkops_generic,
+static struct omap1_clk bclk_1510 = {
 	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
+	.hw.init	= CLK_HW_INIT_NO_PARENT("bclk", &omap1_clk_rate_ops, 0),
 	.rate		= 12000000,
 };
 
-static struct clk bclk_16xx = {
-	.name		= "bclk",
+static struct omap1_clk bclk_16xx = {
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
+	.hw.init	= CLK_HW_INIT_NO_PARENT("bclk", &omap1_clk_full_ops, 0),
 	.enable_reg	= OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL),
 	.enable_bit	= SWD_ULPD_PLL_CLK_REQ,
 	.set_rate	= &omap1_set_ext_clk_rate,
@@ -599,11 +540,10 @@ static struct clk bclk_16xx = {
 	.init		= &omap1_init_ext_clk,
 };
 
-static struct clk mmc1_ck = {
-	.name		= "mmc1_ck",
+static struct omap1_clk mmc1_ck = {
 	.ops		= &clkops_generic,
 	/* Functional clock is direct from ULPD, interface clock is ARMPER */
-	.parent		= &armper_ck.clk,
+	.hw.init	= CLK_HW_INIT("mmc1_ck", "armper_ck", &omap1_clk_full_ops, 0),
 	.rate		= 48000000,
 	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
@@ -614,32 +554,29 @@ static struct clk mmc1_ck = {
  * XXX MOD_CONF_CTRL_0 bit 20 is defined in the 1510 TRM as
  * CONF_MOD_MCBSP3_AUXON ??
  */
-static struct clk mmc2_ck = {
-	.name		= "mmc2_ck",
+static struct omap1_clk mmc2_ck = {
 	.ops		= &clkops_generic,
 	/* Functional clock is direct from ULPD, interface clock is ARMPER */
-	.parent		= &armper_ck.clk,
+	.hw.init	= CLK_HW_INIT("mmc2_ck", "armper_ck", &omap1_clk_full_ops, 0),
 	.rate		= 48000000,
 	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
 	.enable_bit	= 20,
 };
 
-static struct clk mmc3_ck = {
-	.name		= "mmc3_ck",
+static struct omap1_clk mmc3_ck = {
 	.ops		= &clkops_generic,
 	/* Functional clock is direct from ULPD, interface clock is ARMPER */
-	.parent		= &armper_ck.clk,
+	.hw.init	= CLK_HW_INIT("mmc3_ck", "armper_ck", &omap1_clk_full_ops, 0),
 	.rate		= 48000000,
 	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
 	.enable_bit	= SOFT_MMC_DPLL_REQ_SHIFT,
 };
 
-static struct clk virtual_ck_mpu = {
-	.name		= "mpu",
-	.ops		= &clkops_null,
-	.parent		= &arm_ck, /* Is smarter alias for */
+static struct omap1_clk virtual_ck_mpu = {
+	/* Is smarter alias for arm_ck */
+	.hw.init	= CLK_HW_INIT("mpu", "arm_ck", &omap1_clk_rate_ops, 0),
 	.recalc		= &followparent_recalc,
 	.set_rate	= &omap1_select_table_rate,
 	.round_rate	= &omap1_round_to_table_rate,
@@ -647,20 +584,14 @@ static struct clk virtual_ck_mpu = {
 
 /* virtual functional clock domain for I2C. Just for making sure that ARMXOR_CK
 remains active during MPU idle whenever this is enabled */
-static struct clk i2c_fck = {
-	.name		= "i2c_fck",
-	.ops		= &clkops_null,
+static struct omap1_clk i2c_fck = {
+	.hw.init	= CLK_HW_INIT("i2c_fck", "armxor_ck", &omap1_clk_gate_ops, 0),
 	.flags		= CLOCK_NO_IDLE_PARENT,
-	.parent		= &armxor_ck.clk,
-	.recalc		= &followparent_recalc,
 };
 
-static struct clk i2c_ick = {
-	.name		= "i2c_ick",
-	.ops		= &clkops_null,
+static struct omap1_clk i2c_ick = {
+	.hw.init	= CLK_HW_INIT("i2c_ick", "armper_ck", &omap1_clk_gate_ops, 0),
 	.flags		= CLOCK_NO_IDLE_PARENT,
-	.parent		= &armper_ck.clk,
-	.recalc		= &followparent_recalc,
 };
 
 /*
@@ -669,81 +600,81 @@ static struct clk i2c_ick = {
 
 static struct omap_clk omap_clks[] = {
 	/* non-ULPD clocks */
-	CLK(NULL,	"ck_ref",	&ck_ref,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
-	CLK(NULL,	"ck_dpll1",	&ck_dpll1,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
+	CLK(NULL,	"ck_ref",	&ck_ref.hw,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
+	CLK(NULL,	"ck_dpll1",	&ck_dpll1.hw,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
 	/* CK_GEN1 clocks */
-	CLK(NULL,	"ck_dpll1out",	&ck_dpll1out.clk, CK_16XX),
-	CLK(NULL,	"ck_sossi",	&sossi_ck,	CK_16XX),
-	CLK(NULL,	"arm_ck",	&arm_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"armper_ck",	&armper_ck.clk,	CK_16XX | CK_1510 | CK_310),
-	CLK("omap_gpio.0", "ick",	&arm_gpio_ck,	CK_1510 | CK_310),
-	CLK(NULL,	"armxor_ck",	&armxor_ck.clk,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
-	CLK(NULL,	"armtim_ck",	&armtim_ck.clk,	CK_16XX | CK_1510 | CK_310),
-	CLK("omap_wdt",	"fck",		&armwdt_ck.clk,	CK_16XX | CK_1510 | CK_310),
-	CLK("omap_wdt",	"ick",		&armper_ck.clk,	CK_16XX),
-	CLK("omap_wdt", "ick",		&dummy_ck,	CK_1510 | CK_310),
-	CLK(NULL,	"arminth_ck",	&arminth_ck1510, CK_1510 | CK_310),
-	CLK(NULL,	"arminth_ck",	&arminth_ck16xx, CK_16XX),
+	CLK(NULL,	"ck_dpll1out",	&ck_dpll1out.clk.hw, CK_16XX),
+	CLK(NULL,	"ck_sossi",	&sossi_ck.hw,	CK_16XX),
+	CLK(NULL,	"arm_ck",	&arm_ck.hw,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"armper_ck",	&armper_ck.clk.hw, CK_16XX | CK_1510 | CK_310),
+	CLK("omap_gpio.0", "ick",	&arm_gpio_ck.hw, CK_1510 | CK_310),
+	CLK(NULL,	"armxor_ck",	&armxor_ck.clk.hw, CK_16XX | CK_1510 | CK_310 | CK_7XX),
+	CLK(NULL,	"armtim_ck",	&armtim_ck.clk.hw, CK_16XX | CK_1510 | CK_310),
+	CLK("omap_wdt",	"fck",		&armwdt_ck.clk.hw, CK_16XX | CK_1510 | CK_310),
+	CLK("omap_wdt",	"ick",		&armper_ck.clk.hw, CK_16XX),
+	CLK("omap_wdt", "ick",		&dummy_ck.hw,	CK_1510 | CK_310),
+	CLK(NULL,	"arminth_ck",	&arminth_ck1510.hw, CK_1510 | CK_310),
+	CLK(NULL,	"arminth_ck",	&arminth_ck16xx.hw, CK_16XX),
 	/* CK_GEN2 clocks */
-	CLK(NULL,	"dsp_ck",	&dsp_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"dspmmu_ck",	&dspmmu_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"dspper_ck",	&dspper_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"dspxor_ck",	&dspxor_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"dsptim_ck",	&dsptim_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"dsp_ck",	&dsp_ck.hw,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"dspmmu_ck",	&dspmmu_ck.hw,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"dspper_ck",	&dspper_ck.hw,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"dspxor_ck",	&dspxor_ck.hw,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"dsptim_ck",	&dsptim_ck.hw,	CK_16XX | CK_1510 | CK_310),
 	/* CK_GEN3 clocks */
-	CLK(NULL,	"tc_ck",	&tc_ck.clk,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
-	CLK(NULL,	"tipb_ck",	&tipb_ck,	CK_1510 | CK_310),
-	CLK(NULL,	"l3_ocpi_ck",	&l3_ocpi_ck,	CK_16XX | CK_7XX),
-	CLK(NULL,	"tc1_ck",	&tc1_ck,	CK_16XX),
-	CLK(NULL,	"tc2_ck",	&tc2_ck,	CK_16XX),
-	CLK(NULL,	"dma_ck",	&dma_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"dma_lcdfree_ck", &dma_lcdfree_ck, CK_16XX),
-	CLK(NULL,	"api_ck",	&api_ck.clk,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
-	CLK(NULL,	"lb_ck",	&lb_ck.clk,	CK_1510 | CK_310),
-	CLK(NULL,	"rhea1_ck",	&rhea1_ck,	CK_16XX),
-	CLK(NULL,	"rhea2_ck",	&rhea2_ck,	CK_16XX),
-	CLK(NULL,	"lcd_ck",	&lcd_ck_16xx,	CK_16XX | CK_7XX),
-	CLK(NULL,	"lcd_ck",	&lcd_ck_1510.clk, CK_1510 | CK_310),
+	CLK(NULL,	"tc_ck",	&tc_ck.clk.hw,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
+	CLK(NULL,	"tipb_ck",	&tipb_ck.hw,	CK_1510 | CK_310),
+	CLK(NULL,	"l3_ocpi_ck",	&l3_ocpi_ck.hw,	CK_16XX | CK_7XX),
+	CLK(NULL,	"tc1_ck",	&tc1_ck.hw,	CK_16XX),
+	CLK(NULL,	"tc2_ck",	&tc2_ck.hw,	CK_16XX),
+	CLK(NULL,	"dma_ck",	&dma_ck.hw,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"dma_lcdfree_ck", &dma_lcdfree_ck.hw, CK_16XX),
+	CLK(NULL,	"api_ck",	&api_ck.clk.hw,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
+	CLK(NULL,	"lb_ck",	&lb_ck.clk.hw,	CK_1510 | CK_310),
+	CLK(NULL,	"rhea1_ck",	&rhea1_ck.hw,	CK_16XX),
+	CLK(NULL,	"rhea2_ck",	&rhea2_ck.hw,	CK_16XX),
+	CLK(NULL,	"lcd_ck",	&lcd_ck_16xx.hw, CK_16XX | CK_7XX),
+	CLK(NULL,	"lcd_ck",	&lcd_ck_1510.clk.hw, CK_1510 | CK_310),
 	/* ULPD clocks */
-	CLK(NULL,	"uart1_ck",	&uart1_1510,	CK_1510 | CK_310),
-	CLK(NULL,	"uart1_ck",	&uart1_16xx.clk, CK_16XX),
-	CLK(NULL,	"uart1_ck",	&uart1_7xx,	CK_7XX),
-	CLK(NULL,	"uart2_ck",	&uart2_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"uart2_ck",	&uart2_7xx,	CK_7XX),
-	CLK(NULL,	"uart3_ck",	&uart3_1510,	CK_1510 | CK_310),
-	CLK(NULL,	"uart3_ck",	&uart3_16xx.clk, CK_16XX),
-	CLK(NULL,	"usb_clko",	&usb_clko,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"usb_hhc_ck",	&usb_hhc_ck1510, CK_1510 | CK_310),
-	CLK(NULL,	"usb_hhc_ck",	&usb_hhc_ck16xx, CK_16XX),
-	CLK(NULL,	"usb_dc_ck",	&usb_dc_ck,	CK_16XX | CK_7XX),
-	CLK(NULL,	"mclk",		&mclk_1510,	CK_1510 | CK_310),
-	CLK(NULL,	"mclk",		&mclk_16xx,	CK_16XX),
-	CLK(NULL,	"bclk",		&bclk_1510,	CK_1510 | CK_310),
-	CLK(NULL,	"bclk",		&bclk_16xx,	CK_16XX),
-	CLK("mmci-omap.0", "fck",	&mmc1_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK("mmci-omap.0", "fck",	&mmc3_ck,	CK_7XX),
-	CLK("mmci-omap.0", "ick",	&armper_ck.clk,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
-	CLK("mmci-omap.1", "fck",	&mmc2_ck,	CK_16XX),
-	CLK("mmci-omap.1", "ick",	&armper_ck.clk,	CK_16XX),
+	CLK(NULL,	"uart1_ck",	&uart1_1510.hw,	CK_1510 | CK_310),
+	CLK(NULL,	"uart1_ck",	&uart1_16xx.clk.hw, CK_16XX),
+	CLK(NULL,	"uart1_ck",	&uart1_7xx.hw,	CK_7XX),
+	CLK(NULL,	"uart2_ck",	&uart2_ck.hw,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"uart2_ck",	&uart2_7xx.hw,	CK_7XX),
+	CLK(NULL,	"uart3_ck",	&uart3_1510.hw,	CK_1510 | CK_310),
+	CLK(NULL,	"uart3_ck",	&uart3_16xx.clk.hw, CK_16XX),
+	CLK(NULL,	"usb_clko",	&usb_clko.hw,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"usb_hhc_ck",	&usb_hhc_ck1510.hw, CK_1510 | CK_310),
+	CLK(NULL,	"usb_hhc_ck",	&usb_hhc_ck16xx.hw, CK_16XX),
+	CLK(NULL,	"usb_dc_ck",	&usb_dc_ck.hw,	CK_16XX | CK_7XX),
+	CLK(NULL,	"mclk",		&mclk_1510.hw,	CK_1510 | CK_310),
+	CLK(NULL,	"mclk",		&mclk_16xx.hw,	CK_16XX),
+	CLK(NULL,	"bclk",		&bclk_1510.hw,	CK_1510 | CK_310),
+	CLK(NULL,	"bclk",		&bclk_16xx.hw,	CK_16XX),
+	CLK("mmci-omap.0", "fck",	&mmc1_ck.hw,	CK_16XX | CK_1510 | CK_310),
+	CLK("mmci-omap.0", "fck",	&mmc3_ck.hw,	CK_7XX),
+	CLK("mmci-omap.0", "ick",	&armper_ck.clk.hw, CK_16XX | CK_1510 | CK_310 | CK_7XX),
+	CLK("mmci-omap.1", "fck",	&mmc2_ck.hw,	CK_16XX),
+	CLK("mmci-omap.1", "ick",	&armper_ck.clk.hw, CK_16XX),
 	/* Virtual clocks */
-	CLK(NULL,	"mpu",		&virtual_ck_mpu, CK_16XX | CK_1510 | CK_310),
-	CLK("omap_i2c.1", "fck",	&i2c_fck,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
-	CLK("omap_i2c.1", "ick",	&i2c_ick,	CK_16XX),
-	CLK("omap_i2c.1", "ick",	&dummy_ck,	CK_1510 | CK_310 | CK_7XX),
-	CLK("omap1_spi100k.1", "fck",	&dummy_ck,	CK_7XX),
-	CLK("omap1_spi100k.1", "ick",	&dummy_ck,	CK_7XX),
-	CLK("omap1_spi100k.2", "fck",	&dummy_ck,	CK_7XX),
-	CLK("omap1_spi100k.2", "ick",	&dummy_ck,	CK_7XX),
-	CLK("omap_uwire", "fck",	&armxor_ck.clk,	CK_16XX | CK_1510 | CK_310),
-	CLK("omap-mcbsp.1", "ick",	&dspper_ck,	CK_16XX),
-	CLK("omap-mcbsp.1", "ick",	&dummy_ck,	CK_1510 | CK_310),
-	CLK("omap-mcbsp.2", "ick",	&armper_ck.clk,	CK_16XX),
-	CLK("omap-mcbsp.2", "ick",	&dummy_ck,	CK_1510 | CK_310),
-	CLK("omap-mcbsp.3", "ick",	&dspper_ck,	CK_16XX),
-	CLK("omap-mcbsp.3", "ick",	&dummy_ck,	CK_1510 | CK_310),
-	CLK("omap-mcbsp.1", "fck",	&dspxor_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK("omap-mcbsp.2", "fck",	&armper_ck.clk,	CK_16XX | CK_1510 | CK_310),
-	CLK("omap-mcbsp.3", "fck",	&dspxor_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"mpu",		&virtual_ck_mpu.hw, CK_16XX | CK_1510 | CK_310),
+	CLK("omap_i2c.1", "fck",	&i2c_fck.hw,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
+	CLK("omap_i2c.1", "ick",	&i2c_ick.hw,	CK_16XX),
+	CLK("omap_i2c.1", "ick",	&dummy_ck.hw,	CK_1510 | CK_310 | CK_7XX),
+	CLK("omap1_spi100k.1", "fck",	&dummy_ck.hw,	CK_7XX),
+	CLK("omap1_spi100k.1", "ick",	&dummy_ck.hw,	CK_7XX),
+	CLK("omap1_spi100k.2", "fck",	&dummy_ck.hw,	CK_7XX),
+	CLK("omap1_spi100k.2", "ick",	&dummy_ck.hw,	CK_7XX),
+	CLK("omap_uwire", "fck",	&armxor_ck.clk.hw, CK_16XX | CK_1510 | CK_310),
+	CLK("omap-mcbsp.1", "ick",	&dspper_ck.hw,	CK_16XX),
+	CLK("omap-mcbsp.1", "ick",	&dummy_ck.hw,	CK_1510 | CK_310),
+	CLK("omap-mcbsp.2", "ick",	&armper_ck.clk.hw, CK_16XX),
+	CLK("omap-mcbsp.2", "ick",	&dummy_ck.hw,	CK_1510 | CK_310),
+	CLK("omap-mcbsp.3", "ick",	&dspper_ck.hw,	CK_16XX),
+	CLK("omap-mcbsp.3", "ick",	&dummy_ck.hw,	CK_1510 | CK_310),
+	CLK("omap-mcbsp.1", "fck",	&dspxor_ck.hw,	CK_16XX | CK_1510 | CK_310),
+	CLK("omap-mcbsp.2", "fck",	&armper_ck.clk.hw, CK_16XX | CK_1510 | CK_310),
+	CLK("omap-mcbsp.3", "fck",	&dspxor_ck.hw,	CK_16XX | CK_1510 | CK_310),
 };
 
 /*
@@ -763,15 +694,14 @@ u32 cpu_mask;
 int __init omap1_clk_init(void)
 {
 	struct omap_clk *c;
-	int crystal_type = 0; /* Default 12 MHz */
 	u32 reg;
 
 #ifdef CONFIG_DEBUG_LL
-	/*
-	 * Resets some clocks that may be left on from bootloader,
-	 * but leaves serial clocks on.
-	 */
-	omap_writel(0x3 << 29, MOD_CONF_CTRL_0);
+	/* Make sure UART clocks are enabled early */
+	if (cpu_is_omap16xx())
+		omap_writel(omap_readl(MOD_CONF_CTRL_0) |
+			    CONF_MOD_UART1_CLK_MODE_R |
+			    CONF_MOD_UART3_CLK_MODE_R, MOD_CONF_CTRL_0);
 #endif
 
 	/* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */
@@ -783,9 +713,6 @@ int __init omap1_clk_init(void)
 	/* By default all idlect1 clocks are allowed to idle */
 	arm_idlect1_mask = ~0;
 
-	for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++)
-		clk_preinit(c->lk.clk);
-
 	cpu_mask = 0;
 	if (cpu_is_omap1710())
 		cpu_mask |= CK_1710;
@@ -798,27 +725,19 @@ int __init omap1_clk_init(void)
 	if (cpu_is_omap310())
 		cpu_mask |= CK_310;
 
-	for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++)
-		if (c->cpu & cpu_mask) {
-			clkdev_add(&c->lk);
-			clk_register(c->lk.clk);
-		}
-
 	/* Pointers to these clocks are needed by code in clock.c */
-	api_ck_p = clk_get(NULL, "api_ck");
-	ck_dpll1_p = clk_get(NULL, "ck_dpll1");
-	ck_ref_p = clk_get(NULL, "ck_ref");
+	api_ck_p = &api_ck.clk;
+	ck_dpll1_p = &ck_dpll1;
+	ck_ref_p = &ck_ref;
 
 	if (cpu_is_omap7xx())
 		ck_ref.rate = 13000000;
-	if (cpu_is_omap16xx() && crystal_type == 2)
-		ck_ref.rate = 19200000;
 
 	pr_info("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: 0x%04x\n",
 		omap_readw(ARM_SYSST), omap_readw(DPLL_CTL),
 		omap_readw(ARM_CKCTL));
 
-	/* We want to be in syncronous scalable mode */
+	/* We want to be in synchronous scalable mode */
 	omap_writew(0x1000, ARM_SYSST);
 
 
@@ -851,10 +770,7 @@ int __init omap1_clk_init(void)
 			}
 		}
 	}
-	propagate_rate(&ck_dpll1);
-	/* Cache rates for clocks connected to ck_ref (not dpll1) */
-	propagate_rate(&ck_ref);
-	omap1_show_rates();
+
 	if (machine_is_omap_perseus2() || machine_is_omap_fsample()) {
 		/* Select slicer output as OMAP input clock */
 		omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1,
@@ -886,16 +802,28 @@ int __init omap1_clk_init(void)
 	 */
 	omap_writew(0x0000, ARM_IDLECT2);	/* Turn LCD clock off also */
 
-	/*
-	 * Only enable those clocks we will need, let the drivers
-	 * enable other clocks as necessary
-	 */
-	clk_enable(&armper_ck.clk);
-	clk_enable(&armxor_ck.clk);
-	clk_enable(&armtim_ck.clk); /* This should be done by timer code */
+	for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++) {
+		if (!(c->cpu & cpu_mask))
+			continue;
+
+		if (c->lk.clk_hw->init) { /* NULL if provider already registered */
+			const struct clk_init_data *init = c->lk.clk_hw->init;
+			const char *name = c->lk.clk_hw->init->name;
+			int err;
+
+			err = clk_hw_register(NULL, c->lk.clk_hw);
+			if (err < 0) {
+				pr_err("failed to register clock \"%s\"! (%d)\n", name, err);
+				/* may be tried again, restore init data */
+				c->lk.clk_hw->init = init;
+				continue;
+			}
+		}
+
+		clk_hw_register_clkdev(c->lk.clk_hw, c->lk.con_id, c->lk.dev_id);
+	}
 
-	if (cpu_is_omap15xx())
-		clk_enable(&arm_gpio_ck);
+	omap1_show_rates();
 
 	return 0;
 }
@@ -907,7 +835,7 @@ void __init omap1_clk_late_init(void)
 	unsigned long rate = ck_dpll1.rate;
 
 	/* Find the highest supported frequency and enable it */
-	if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
+	if (omap1_select_table_rate(&virtual_ck_mpu, ~0, arm_ck.rate)) {
 		pr_err("System frequencies not set, using default. Check your config.\n");
 		/*
 		 * Reprogramming the DPLL is tricky, it must be done from SRAM.
diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h
index 504b959ba5cf..5ceff05e15c0 100644
--- a/arch/arm/mach-omap1/common.h
+++ b/arch/arm/mach-omap1/common.h
@@ -31,8 +31,7 @@
 
 #include <asm/exception.h>
 
-#include <mach/irqs.h>
-
+#include "irqs.h"
 #include "soc.h"
 #include "i2c.h"
 
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index eb0f09edb3d1..80e94770582a 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -14,15 +14,15 @@
 #include <linux/spi/spi.h>
 
 #include <linux/platform_data/omap-wd-timer.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #include <asm/mach/map.h>
 
-#include <mach/tc.h>
-#include <mach/mux.h>
-
-#include <mach/omap7xx.h>
-#include <mach/hardware.h>
+#include "tc.h"
+#include "mux.h"
 
+#include "omap7xx.h"
+#include "hardware.h"
 #include "common.h"
 #include "clock.h"
 #include "mmc.h"
@@ -356,7 +356,7 @@ static int __init omap1_init_devices(void)
 	if (!cpu_class_is_omap1())
 		return -ENODEV;
 
-	omap_sram_init();
+	omap1_sram_init();
 	omap1_clk_late_init();
 
 	/* please keep these calls, and their implementations above,
diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c
index 2bf659fb6099..c3f280c3c5d7 100644
--- a/arch/arm/mach-omap1/dma.c
+++ b/arch/arm/mach-omap1/dma.c
@@ -24,7 +24,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/dmaengine.h>
 #include <linux/omap-dma.h>
-#include <mach/tc.h>
+#include "tc.h"
 
 #include "soc.h"
 
diff --git a/arch/arm/mach-omap1/fb.c b/arch/arm/mach-omap1/fb.c
index 0e32a959f254..b6e952b03838 100644
--- a/arch/arm/mach-omap1/fb.c
+++ b/arch/arm/mach-omap1/fb.c
@@ -17,9 +17,12 @@
 #include <linux/io.h>
 #include <linux/omapfb.h>
 #include <linux/dma-mapping.h>
+#include <linux/irq.h>
 
 #include <asm/mach/map.h>
 
+#include "irqs.h"
+
 #if IS_ENABLED(CONFIG_FB_OMAP)
 
 static bool omapfb_lcd_configured;
@@ -27,6 +30,19 @@ static struct omapfb_platform_data omapfb_config;
 
 static u64 omap_fb_dma_mask = ~(u32)0;
 
+static struct resource omap_fb_resources[] = {
+	{
+		.name  = "irq",
+		.start = INT_LCD_CTRL,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "irq",
+		.start = INT_SOSSI_MATCH,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
 static struct platform_device omap_fb_device = {
 	.name		= "omapfb",
 	.id		= -1,
@@ -35,7 +51,8 @@ static struct platform_device omap_fb_device = {
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
 		.platform_data		= &omapfb_config,
 	},
-	.num_resources = 0,
+	.num_resources = ARRAY_SIZE(omap_fb_resources),
+	.resource = omap_fb_resources,
 };
 
 void __init omapfb_set_lcd_config(const struct omap_lcd_config *config)
diff --git a/arch/arm/mach-omap1/flash.c b/arch/arm/mach-omap1/flash.c
index 40e43ce5329f..0a3ddb3b66eb 100644
--- a/arch/arm/mach-omap1/flash.c
+++ b/arch/arm/mach-omap1/flash.c
@@ -6,11 +6,12 @@
 #include <linux/io.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
+#include <linux/soc/ti/omap1-io.h>
+
+#include "tc.h"
 
-#include <mach/tc.h>
 #include "flash.h"
 
-#include <mach/hardware.h>
 
 void omap1_set_vpp(struct platform_device *pdev, int enable)
 {
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index f03ed523f20f..4c71a195969f 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -24,8 +24,7 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 
-#include <mach/hardware.h>
-
+#include "hardware.h"
 #include "iomap.h"
 #include "common.h"
 #include "fpga.h"
diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c
index 3ec08bd5d8a0..c675f11de99d 100644
--- a/arch/arm/mach-omap1/gpio15xx.c
+++ b/arch/arm/mach-omap1/gpio15xx.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * OMAP15xx specific gpio init
  *
@@ -5,21 +6,13 @@
  *
  * Author:
  *	Charulatha V <charu@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/gpio.h>
 #include <linux/platform_data/gpio-omap.h>
+#include <linux/soc/ti/omap1-soc.h>
 
-#include <mach/irqs.h>
+#include "irqs.h"
 
 #define OMAP1_MPUIO_VBASE		OMAP1_MPUIO_BASE
 #define OMAP1510_GPIO_BASE		0xFFFCE000
diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c
index 500cfd416c42..cf052714b3f8 100644
--- a/arch/arm/mach-omap1/gpio16xx.c
+++ b/arch/arm/mach-omap1/gpio16xx.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * OMAP16xx specific gpio init
  *
@@ -5,22 +6,14 @@
  *
  * Author:
  *	Charulatha V <charu@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/gpio.h>
 #include <linux/platform_data/gpio-omap.h>
+#include <linux/soc/ti/omap1-io.h>
 
-#include <mach/irqs.h>
-
+#include "hardware.h"
+#include "irqs.h"
 #include "soc.h"
 
 #define OMAP1610_GPIO1_BASE		0xfffbe400
diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c
index aeb81c18ffcc..c372b357eab4 100644
--- a/arch/arm/mach-omap1/gpio7xx.c
+++ b/arch/arm/mach-omap1/gpio7xx.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * OMAP7xx specific gpio init
  *
@@ -5,22 +6,12 @@
  *
  * Author:
  *	Charulatha V <charu@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/gpio.h>
 #include <linux/platform_data/gpio-omap.h>
 
-#include <mach/irqs.h>
-
+#include "irqs.h"
 #include "soc.h"
 
 #define OMAP7XX_GPIO1_BASE		0xfffbc000
diff --git a/arch/arm/mach-omap1/include/mach/hardware.h b/arch/arm/mach-omap1/hardware.h
index e7c8ac7d83e3..c228234a1ed4 100644
--- a/arch/arm/mach-omap1/include/mach/hardware.h
+++ b/arch/arm/mach-omap1/hardware.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-omap1/include/mach/hardware.h
- *
  * Hardware definitions for TI OMAP processors and boards
  *
  * NOTE: Please put device driver specific defines into a separate header
@@ -37,21 +35,12 @@
 #define __ASM_ARCH_OMAP_HARDWARE_H
 
 #include <linux/sizes.h>
+#include <linux/soc/ti/omap1-io.h>
 #ifndef __ASSEMBLER__
 #include <asm/types.h>
-#include <mach/soc.h>
+#include <linux/soc/ti/omap1-soc.h>
 
-/*
- * NOTE: Please use ioremap + __raw_read/write where possible instead of these
- */
-extern u8 omap_readb(u32 pa);
-extern u16 omap_readw(u32 pa);
-extern u32 omap_readl(u32 pa);
-extern void omap_writeb(u8 v, u32 pa);
-extern void omap_writew(u16 v, u32 pa);
-extern void omap_writel(u32 v, u32 pa);
-
-#include <mach/tc.h>
+#include "tc.h"
 
 /* Almost all documentation for chip and board memory maps assumes
  * BM is clear.  Most devel boards have a switch to control booting
@@ -72,10 +61,10 @@ static inline u32 omap_cs3_phys(void)
 
 #endif	/* ifndef __ASSEMBLER__ */
 
-#define OMAP1_IO_OFFSET		0x01000000	/* Virtual IO = 0xfefb0000 */
+#define OMAP1_IO_OFFSET		0x00f00000	/* Virtual IO = 0xff0b0000 */
 #define OMAP1_IO_ADDRESS(pa)	IOMEM((pa) - OMAP1_IO_OFFSET)
 
-#include <mach/serial.h>
+#include "serial.h"
 
 /*
  * ---------------------------------------------------------------------------
@@ -99,66 +88,6 @@ static inline u32 omap_cs3_phys(void)
 #define MPU_TIMER_ST		(1 << 0)
 
 /*
- * ----------------------------------------------------------------------------
- * Clocks
- * ----------------------------------------------------------------------------
- */
-#define CLKGEN_REG_BASE		(0xfffece00)
-#define ARM_CKCTL		(CLKGEN_REG_BASE + 0x0)
-#define ARM_IDLECT1		(CLKGEN_REG_BASE + 0x4)
-#define ARM_IDLECT2		(CLKGEN_REG_BASE + 0x8)
-#define ARM_EWUPCT		(CLKGEN_REG_BASE + 0xC)
-#define ARM_RSTCT1		(CLKGEN_REG_BASE + 0x10)
-#define ARM_RSTCT2		(CLKGEN_REG_BASE + 0x14)
-#define ARM_SYSST		(CLKGEN_REG_BASE + 0x18)
-#define ARM_IDLECT3		(CLKGEN_REG_BASE + 0x24)
-
-#define CK_RATEF		1
-#define CK_IDLEF		2
-#define CK_ENABLEF		4
-#define CK_SELECTF		8
-#define SETARM_IDLE_SHIFT
-
-/* DPLL control registers */
-#define DPLL_CTL		(0xfffecf00)
-
-/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */
-#define DSP_CONFIG_REG_BASE     IOMEM(0xe1008000)
-#define DSP_CKCTL		(DSP_CONFIG_REG_BASE + 0x0)
-#define DSP_IDLECT1		(DSP_CONFIG_REG_BASE + 0x4)
-#define DSP_IDLECT2		(DSP_CONFIG_REG_BASE + 0x8)
-#define DSP_RSTCT2		(DSP_CONFIG_REG_BASE + 0x14)
-
-/*
- * ---------------------------------------------------------------------------
- * UPLD
- * ---------------------------------------------------------------------------
- */
-#define ULPD_REG_BASE		(0xfffe0800)
-#define ULPD_IT_STATUS		(ULPD_REG_BASE + 0x14)
-#define ULPD_SETUP_ANALOG_CELL_3	(ULPD_REG_BASE + 0x24)
-#define ULPD_CLOCK_CTRL		(ULPD_REG_BASE + 0x30)
-#	define DIS_USB_PVCI_CLK		(1 << 5)	/* no USB/FAC synch */
-#	define USB_MCLK_EN		(1 << 4)	/* enable W4_USB_CLKO */
-#define ULPD_SOFT_REQ		(ULPD_REG_BASE + 0x34)
-#	define SOFT_UDC_REQ		(1 << 4)
-#	define SOFT_USB_CLK_REQ		(1 << 3)
-#	define SOFT_DPLL_REQ		(1 << 0)
-#define ULPD_DPLL_CTRL		(ULPD_REG_BASE + 0x3c)
-#define ULPD_STATUS_REQ		(ULPD_REG_BASE + 0x40)
-#define ULPD_APLL_CTRL		(ULPD_REG_BASE + 0x4c)
-#define ULPD_POWER_CTRL		(ULPD_REG_BASE + 0x50)
-#define ULPD_SOFT_DISABLE_REQ_REG	(ULPD_REG_BASE + 0x68)
-#	define DIS_MMC2_DPLL_REQ	(1 << 11)
-#	define DIS_MMC1_DPLL_REQ	(1 << 10)
-#	define DIS_UART3_DPLL_REQ	(1 << 9)
-#	define DIS_UART2_DPLL_REQ	(1 << 8)
-#	define DIS_UART1_DPLL_REQ	(1 << 7)
-#	define DIS_USB_HOST_DPLL_REQ	(1 << 6)
-#define ULPD_SDW_CLK_DIV_CTRL_SEL	(ULPD_REG_BASE + 0x74)
-#define ULPD_CAM_CLK_CTRL	(ULPD_REG_BASE + 0x7c)
-
-/*
  * ---------------------------------------------------------------------------
  * Watchdog timer
  * ---------------------------------------------------------------------------
@@ -213,52 +142,6 @@ static inline u32 omap_cs3_phys(void)
 
 #endif
 
-/*
- * ----------------------------------------------------------------------------
- * System control registers
- * ----------------------------------------------------------------------------
- */
-#define MOD_CONF_CTRL_0		0xfffe1080
-#define MOD_CONF_CTRL_1		0xfffe1110
-
-/*
- * ----------------------------------------------------------------------------
- * Pin multiplexing registers
- * ----------------------------------------------------------------------------
- */
-#define FUNC_MUX_CTRL_0		0xfffe1000
-#define FUNC_MUX_CTRL_1		0xfffe1004
-#define FUNC_MUX_CTRL_2		0xfffe1008
-#define COMP_MODE_CTRL_0	0xfffe100c
-#define FUNC_MUX_CTRL_3		0xfffe1010
-#define FUNC_MUX_CTRL_4		0xfffe1014
-#define FUNC_MUX_CTRL_5		0xfffe1018
-#define FUNC_MUX_CTRL_6		0xfffe101C
-#define FUNC_MUX_CTRL_7		0xfffe1020
-#define FUNC_MUX_CTRL_8		0xfffe1024
-#define FUNC_MUX_CTRL_9		0xfffe1028
-#define FUNC_MUX_CTRL_A		0xfffe102C
-#define FUNC_MUX_CTRL_B		0xfffe1030
-#define FUNC_MUX_CTRL_C		0xfffe1034
-#define FUNC_MUX_CTRL_D		0xfffe1038
-#define PULL_DWN_CTRL_0		0xfffe1040
-#define PULL_DWN_CTRL_1		0xfffe1044
-#define PULL_DWN_CTRL_2		0xfffe1048
-#define PULL_DWN_CTRL_3		0xfffe104c
-#define PULL_DWN_CTRL_4		0xfffe10ac
-
-/* OMAP-1610 specific multiplexing registers */
-#define FUNC_MUX_CTRL_E		0xfffe1090
-#define FUNC_MUX_CTRL_F		0xfffe1094
-#define FUNC_MUX_CTRL_10	0xfffe1098
-#define FUNC_MUX_CTRL_11	0xfffe109c
-#define FUNC_MUX_CTRL_12	0xfffe10a0
-#define PU_PD_SEL_0		0xfffe10b4
-#define PU_PD_SEL_1		0xfffe10b8
-#define PU_PD_SEL_2		0xfffe10bc
-#define PU_PD_SEL_3		0xfffe10c0
-#define PU_PD_SEL_4		0xfffe10c4
-
 /* Timer32K for 1610 and 1710*/
 #define OMAP_TIMER32K_BASE	0xFFFBC400
 
@@ -300,15 +183,6 @@ static inline u32 omap_cs3_phys(void)
 #define OMAP_LPG2_PMR			(OMAP_LPG2_BASE + 0x04)
 
 /*
- * ----------------------------------------------------------------------------
- * Pulse-Width Light
- * ----------------------------------------------------------------------------
- */
-#define OMAP_PWL_BASE			0xfffb5800
-#define OMAP_PWL_ENABLE			(OMAP_PWL_BASE + 0x00)
-#define OMAP_PWL_CLK_ENABLE		(OMAP_PWL_BASE + 0x04)
-
-/*
  * ---------------------------------------------------------------------------
  * Processor specific defines
  * ---------------------------------------------------------------------------
diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c
index 5e6d81b1624c..22f945360599 100644
--- a/arch/arm/mach-omap1/i2c.c
+++ b/arch/arm/mach-omap1/i2c.c
@@ -7,8 +7,10 @@
 
 #include <linux/i2c.h>
 #include <linux/platform_data/i2c-omap.h>
-#include <mach/mux.h>
+
+#include "mux.h"
 #include "soc.h"
+#include "i2c.h"
 
 #define OMAP_I2C_SIZE		0x3f
 #define OMAP1_I2C_BASE		0xfffb3800
diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c
index 91556e374152..c3bb1b71fdf3 100644
--- a/arch/arm/mach-omap1/id.c
+++ b/arch/arm/mach-omap1/id.c
@@ -12,12 +12,11 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/soc/ti/omap1-io.h>
 #include <asm/system_info.h>
 
 #include "soc.h"
-
-#include <mach/hardware.h>
-
+#include "hardware.h"
 #include "common.h"
 
 #define OMAP_DIE_ID_0		0xfffe1800
diff --git a/arch/arm/mach-omap1/include/mach/io.h b/arch/arm/mach-omap1/include/mach/io.h
deleted file mode 100644
index ce4f8005b26f..000000000000
--- a/arch/arm/mach-omap1/include/mach/io.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * arch/arm/mach-omap1/include/mach/io.h
- *
- * IO definitions for TI OMAP processors and boards
- *
- * Copied from arch/arm/mach-sa1100/include/mach/io.h
- * Copyright (C) 1997-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Modifications:
- *  06-12-1997	RMK	Created.
- *  07-04-1999	RMK	Major cleanup
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We don't actually have real ISA nor PCI buses, but there is so many
- * drivers out there that might just work if we fake them...
- */
-#define __io(a)		__typesafe_io(a)
-
-#endif
diff --git a/arch/arm/mach-omap1/include/mach/lcd_dma.h b/arch/arm/mach-omap1/include/mach/lcd_dma.h
deleted file mode 100644
index 1a3c0cf17899..000000000000
--- a/arch/arm/mach-omap1/include/mach/lcd_dma.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- *  arch/arm/mach-omap1/include/mach/lcd_dma.h
- *
- * Extracted from arch/arm/plat-omap/include/plat/dma.h
- *  Copyright (C) 2003 Nokia Corporation
- *  Author: Juha Yrjölä <juha.yrjola@nokia.com>
- */
-#ifndef __MACH_OMAP1_LCD_DMA_H__
-#define __MACH_OMAP1_LCD_DMA_H__
-
-/* Hardware registers for LCD DMA */
-#define OMAP1510_DMA_LCD_BASE		(0xfffedb00)
-#define OMAP1510_DMA_LCD_CTRL		(OMAP1510_DMA_LCD_BASE + 0x00)
-#define OMAP1510_DMA_LCD_TOP_F1_L	(OMAP1510_DMA_LCD_BASE + 0x02)
-#define OMAP1510_DMA_LCD_TOP_F1_U	(OMAP1510_DMA_LCD_BASE + 0x04)
-#define OMAP1510_DMA_LCD_BOT_F1_L	(OMAP1510_DMA_LCD_BASE + 0x06)
-#define OMAP1510_DMA_LCD_BOT_F1_U	(OMAP1510_DMA_LCD_BASE + 0x08)
-
-#define OMAP1610_DMA_LCD_BASE		(0xfffee300)
-#define OMAP1610_DMA_LCD_CSDP		(OMAP1610_DMA_LCD_BASE + 0xc0)
-#define OMAP1610_DMA_LCD_CCR		(OMAP1610_DMA_LCD_BASE + 0xc2)
-#define OMAP1610_DMA_LCD_CTRL		(OMAP1610_DMA_LCD_BASE + 0xc4)
-#define OMAP1610_DMA_LCD_TOP_B1_L	(OMAP1610_DMA_LCD_BASE + 0xc8)
-#define OMAP1610_DMA_LCD_TOP_B1_U	(OMAP1610_DMA_LCD_BASE + 0xca)
-#define OMAP1610_DMA_LCD_BOT_B1_L	(OMAP1610_DMA_LCD_BASE + 0xcc)
-#define OMAP1610_DMA_LCD_BOT_B1_U	(OMAP1610_DMA_LCD_BASE + 0xce)
-#define OMAP1610_DMA_LCD_TOP_B2_L	(OMAP1610_DMA_LCD_BASE + 0xd0)
-#define OMAP1610_DMA_LCD_TOP_B2_U	(OMAP1610_DMA_LCD_BASE + 0xd2)
-#define OMAP1610_DMA_LCD_BOT_B2_L	(OMAP1610_DMA_LCD_BASE + 0xd4)
-#define OMAP1610_DMA_LCD_BOT_B2_U	(OMAP1610_DMA_LCD_BASE + 0xd6)
-#define OMAP1610_DMA_LCD_SRC_EI_B1	(OMAP1610_DMA_LCD_BASE + 0xd8)
-#define OMAP1610_DMA_LCD_SRC_FI_B1_L	(OMAP1610_DMA_LCD_BASE + 0xda)
-#define OMAP1610_DMA_LCD_SRC_EN_B1	(OMAP1610_DMA_LCD_BASE + 0xe0)
-#define OMAP1610_DMA_LCD_SRC_FN_B1	(OMAP1610_DMA_LCD_BASE + 0xe4)
-#define OMAP1610_DMA_LCD_LCH_CTRL	(OMAP1610_DMA_LCD_BASE + 0xea)
-#define OMAP1610_DMA_LCD_SRC_FI_B1_U	(OMAP1610_DMA_LCD_BASE + 0xf4)
-
-/* LCD DMA block numbers */
-enum {
-	OMAP_LCD_DMA_B1_TOP,
-	OMAP_LCD_DMA_B1_BOTTOM,
-	OMAP_LCD_DMA_B2_TOP,
-	OMAP_LCD_DMA_B2_BOTTOM
-};
-
-/* LCD DMA functions */
-extern int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
-				void *data);
-extern void omap_free_lcd_dma(void);
-extern void omap_setup_lcd_dma(void);
-extern void omap_enable_lcd_dma(void);
-extern void omap_stop_lcd_dma(void);
-extern void omap_set_lcd_dma_ext_controller(int external);
-extern void omap_set_lcd_dma_single_transfer(int single);
-extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
-				int data_type);
-extern void omap_set_lcd_dma_b1_rotation(int rotate);
-extern void omap_set_lcd_dma_b1_vxres(unsigned long vxres);
-extern void omap_set_lcd_dma_b1_mirror(int mirror);
-extern void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale);
-
-extern int omap_lcd_dma_running(void);
-
-#endif /* __MACH_OMAP1_LCD_DMA_H__ */
diff --git a/arch/arm/mach-omap1/include/mach/lcdc.h b/arch/arm/mach-omap1/include/mach/lcdc.h
deleted file mode 100644
index 7152db1f5361..000000000000
--- a/arch/arm/mach-omap1/include/mach/lcdc.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * arch/arm/mach-omap1/include/mach/lcdc.h
- *
- * Extracted from drivers/video/omap/lcdc.c
- * Copyright (C) 2004 Nokia Corporation
- * Author: Imre Deak <imre.deak@nokia.com>
- */
-#ifndef __MACH_LCDC_H__
-#define __MACH_LCDC_H__
-
-#define OMAP_LCDC_BASE			0xfffec000
-#define OMAP_LCDC_SIZE			256
-#define OMAP_LCDC_IRQ			INT_LCD_CTRL
-
-#define OMAP_LCDC_CONTROL		(OMAP_LCDC_BASE + 0x00)
-#define OMAP_LCDC_TIMING0		(OMAP_LCDC_BASE + 0x04)
-#define OMAP_LCDC_TIMING1		(OMAP_LCDC_BASE + 0x08)
-#define OMAP_LCDC_TIMING2		(OMAP_LCDC_BASE + 0x0c)
-#define OMAP_LCDC_STATUS		(OMAP_LCDC_BASE + 0x10)
-#define OMAP_LCDC_SUBPANEL		(OMAP_LCDC_BASE + 0x14)
-#define OMAP_LCDC_LINE_INT		(OMAP_LCDC_BASE + 0x18)
-#define OMAP_LCDC_DISPLAY_STATUS	(OMAP_LCDC_BASE + 0x1c)
-
-#define OMAP_LCDC_STAT_DONE		(1 << 0)
-#define OMAP_LCDC_STAT_VSYNC		(1 << 1)
-#define OMAP_LCDC_STAT_SYNC_LOST	(1 << 2)
-#define OMAP_LCDC_STAT_ABC		(1 << 3)
-#define OMAP_LCDC_STAT_LINE_INT		(1 << 4)
-#define OMAP_LCDC_STAT_FUF		(1 << 5)
-#define OMAP_LCDC_STAT_LOADED_PALETTE	(1 << 6)
-
-#define OMAP_LCDC_CTRL_LCD_EN		(1 << 0)
-#define OMAP_LCDC_CTRL_LCD_TFT		(1 << 7)
-#define OMAP_LCDC_CTRL_LINE_IRQ_CLR_SEL	(1 << 10)
-
-#define OMAP_LCDC_IRQ_VSYNC		(1 << 2)
-#define OMAP_LCDC_IRQ_DONE		(1 << 3)
-#define OMAP_LCDC_IRQ_LOADED_PALETTE	(1 << 4)
-#define OMAP_LCDC_IRQ_LINE_NIRQ		(1 << 5)
-#define OMAP_LCDC_IRQ_LINE		(1 << 6)
-#define OMAP_LCDC_IRQ_MASK		(((1 << 5) - 1) << 2)
-
-#endif /* __MACH_LCDC_H__ */
diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h
deleted file mode 100644
index ba3a350479c8..000000000000
--- a/arch/arm/mach-omap1/include/mach/memory.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-omap1/include/mach/memory.h
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/* REVISIT: omap1 legacy drivers still rely on this */
-#include <mach/soc.h>
-
-#endif
diff --git a/arch/arm/mach-omap1/include/mach/mux.h b/arch/arm/mach-omap1/include/mach/mux.h
deleted file mode 100644
index 3f6dc55d9898..000000000000
--- a/arch/arm/mach-omap1/include/mach/mux.h
+++ /dev/null
@@ -1,441 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * arch/arm/plat-omap/include/mach/mux.h
- *
- * Table of the Omap register configurations for the FUNC_MUX and
- * PULL_DWN combinations.
- *
- * Copyright (C) 2004 - 2008 Texas Instruments Inc.
- * Copyright (C) 2003 - 2008 Nokia Corporation
- *
- * Written by Tony Lindgren
- *
- * NOTE: Please use the following naming style for new pin entries.
- *	 For example, W8_1610_MMC2_DAT0, where:
- *	 - W8	     = ball
- *	 - 1610	     = 1510 or 1610, none if common for both 1510 and 1610
- *	 - MMC2_DAT0 = function
- */
-
-#ifndef __ASM_ARCH_MUX_H
-#define __ASM_ARCH_MUX_H
-
-#define PU_PD_SEL_NA		0	/* No pu_pd reg available */
-#define PULL_DWN_CTRL_NA	0	/* No pull-down control needed */
-
-#ifdef	CONFIG_OMAP_MUX_DEBUG
-#define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \
-					.mux_reg = FUNC_MUX_CTRL_##reg, \
-					.mask_offset = mode_offset, \
-					.mask = mode,
-
-#define PULL_REG(reg, bit, status)	.pull_name = "PULL_DWN_CTRL_"#reg, \
-					.pull_reg = PULL_DWN_CTRL_##reg, \
-					.pull_bit = bit, \
-					.pull_val = status,
-
-#define PU_PD_REG(reg, status)		.pu_pd_name = "PU_PD_SEL_"#reg, \
-					.pu_pd_reg = PU_PD_SEL_##reg, \
-					.pu_pd_val = status,
-
-#define MUX_REG_7XX(reg, mode_offset, mode) .mux_reg_name = "OMAP7XX_IO_CONF_"#reg, \
-					.mux_reg = OMAP7XX_IO_CONF_##reg, \
-					.mask_offset = mode_offset, \
-					.mask = mode,
-
-#define PULL_REG_7XX(reg, bit, status)	.pull_name = "OMAP7XX_IO_CONF_"#reg, \
-					.pull_reg = OMAP7XX_IO_CONF_##reg, \
-					.pull_bit = bit, \
-					.pull_val = status,
-
-#else
-
-#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \
-					.mask_offset = mode_offset, \
-					.mask = mode,
-
-#define PULL_REG(reg, bit, status)	.pull_reg = PULL_DWN_CTRL_##reg, \
-					.pull_bit = bit, \
-					.pull_val = status,
-
-#define PU_PD_REG(reg, status)		.pu_pd_reg = PU_PD_SEL_##reg, \
-					.pu_pd_val = status,
-
-#define MUX_REG_7XX(reg, mode_offset, mode) \
-					.mux_reg = OMAP7XX_IO_CONF_##reg, \
-					.mask_offset = mode_offset, \
-					.mask = mode,
-
-#define PULL_REG_7XX(reg, bit, status)	.pull_reg = OMAP7XX_IO_CONF_##reg, \
-					.pull_bit = bit, \
-					.pull_val = status,
-
-#endif /* CONFIG_OMAP_MUX_DEBUG */
-
-#define MUX_CFG(desc, mux_reg, mode_offset, mode,	\
-		pull_reg, pull_bit, pull_status,	\
-		pu_pd_reg, pu_pd_status, debug_status)	\
-{							\
-	.name =	 desc,					\
-	.debug = debug_status,				\
-	MUX_REG(mux_reg, mode_offset, mode)		\
-	PULL_REG(pull_reg, pull_bit, pull_status)	\
-	PU_PD_REG(pu_pd_reg, pu_pd_status)		\
-},
-
-
-/*
- * OMAP730/850 has a slightly different config for the pin mux.
- * - config regs are the OMAP7XX_IO_CONF_x regs (see omap7xx.h) regs and
- *   not the FUNC_MUX_CTRL_x regs from hardware.h
- * - for pull-up/down, only has one enable bit which is in the same register
- *   as mux config
- */
-#define MUX_CFG_7XX(desc, mux_reg, mode_offset, mode,	\
-		   pull_bit, pull_status, debug_status)\
-{							\
-	.name =	 desc,					\
-	.debug = debug_status,				\
-	MUX_REG_7XX(mux_reg, mode_offset, mode)		\
-	PULL_REG_7XX(mux_reg, pull_bit, pull_status)	\
-	PU_PD_REG(NA, 0)		\
-},
-
-struct pin_config {
-	char 			*name;
-	const unsigned int 	mux_reg;
-	unsigned char		debug;
-
-	const unsigned char mask_offset;
-	const unsigned char mask;
-
-	const char *pull_name;
-	const unsigned int pull_reg;
-	const unsigned char pull_val;
-	const unsigned char pull_bit;
-
-	const char *pu_pd_name;
-	const unsigned int pu_pd_reg;
-	const unsigned char pu_pd_val;
-
-#if	defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
-	const char *mux_reg_name;
-#endif
-
-};
-
-enum omap7xx_index {
-	/* OMAP 730 keyboard */
-	E2_7XX_KBR0,
-	J7_7XX_KBR1,
-	E1_7XX_KBR2,
-	F3_7XX_KBR3,
-	D2_7XX_KBR4,
-	C2_7XX_KBC0,
-	D3_7XX_KBC1,
-	E4_7XX_KBC2,
-	F4_7XX_KBC3,
-	E3_7XX_KBC4,
-
-	/* USB */
-	AA17_7XX_USB_DM,
-	W16_7XX_USB_PU_EN,
-	W17_7XX_USB_VBUSI,
-	W18_7XX_USB_DMCK_OUT,
-	W19_7XX_USB_DCRST,
-
-	/* MMC */
-	MMC_7XX_CMD,
-	MMC_7XX_CLK,
-	MMC_7XX_DAT0,
-
-	/* I2C */
-	I2C_7XX_SCL,
-	I2C_7XX_SDA,
-
-	/* SPI */
-	SPI_7XX_1,
-	SPI_7XX_2,
-	SPI_7XX_3,
-	SPI_7XX_4,
-	SPI_7XX_5,
-	SPI_7XX_6,
-
-	/* UART */
-	UART_7XX_1,
-	UART_7XX_2,
-};
-
-enum omap1xxx_index {
-	/* UART1 (BT_UART_GATING)*/
-	UART1_TX = 0,
-	UART1_RTS,
-
-	/* UART2 (COM_UART_GATING)*/
-	UART2_TX,
-	UART2_RX,
-	UART2_CTS,
-	UART2_RTS,
-
-	/* UART3 (GIGA_UART_GATING) */
-	UART3_TX,
-	UART3_RX,
-	UART3_CTS,
-	UART3_RTS,
-	UART3_CLKREQ,
-	UART3_BCLK,	/* 12MHz clock out */
-	Y15_1610_UART3_RTS,
-
-	/* PWT & PWL */
-	PWT,
-	PWL,
-
-	/* USB master generic */
-	R18_USB_VBUS,
-	R18_1510_USB_GPIO0,
-	W4_USB_PUEN,
-	W4_USB_CLKO,
-	W4_USB_HIGHZ,
-	W4_GPIO58,
-
-	/* USB1 master */
-	USB1_SUSP,
-	USB1_SEO,
-	W13_1610_USB1_SE0,
-	USB1_TXEN,
-	USB1_TXD,
-	USB1_VP,
-	USB1_VM,
-	USB1_RCV,
-	USB1_SPEED,
-	R13_1610_USB1_SPEED,
-	R13_1710_USB1_SE0,
-
-	/* USB2 master */
-	USB2_SUSP,
-	USB2_VP,
-	USB2_TXEN,
-	USB2_VM,
-	USB2_RCV,
-	USB2_SEO,
-	USB2_TXD,
-
-	/* OMAP-1510 GPIO */
-	R18_1510_GPIO0,
-	R19_1510_GPIO1,
-	M14_1510_GPIO2,
-
-	/* OMAP1610 GPIO */
-	P18_1610_GPIO3,
-	Y15_1610_GPIO17,
-
-	/* OMAP-1710 GPIO */
-	R18_1710_GPIO0,
-	V2_1710_GPIO10,
-	N21_1710_GPIO14,
-	W15_1710_GPIO40,
-
-	/* MPUIO */
-	MPUIO2,
-	N15_1610_MPUIO2,
-	MPUIO4,
-	MPUIO5,
-	T20_1610_MPUIO5,
-	W11_1610_MPUIO6,
-	V10_1610_MPUIO7,
-	W11_1610_MPUIO9,
-	V10_1610_MPUIO10,
-	W10_1610_MPUIO11,
-	E20_1610_MPUIO13,
-	U20_1610_MPUIO14,
-	E19_1610_MPUIO15,
-
-	/* MCBSP2 */
-	MCBSP2_CLKR,
-	MCBSP2_CLKX,
-	MCBSP2_DR,
-	MCBSP2_DX,
-	MCBSP2_FSR,
-	MCBSP2_FSX,
-
-	/* MCBSP3 */
-	MCBSP3_CLKX,
-
-	/* Misc ballouts */
-	BALLOUT_V8_ARMIO3,
-	N20_HDQ,
-
-	/* OMAP-1610 MMC2 */
-	W8_1610_MMC2_DAT0,
-	V8_1610_MMC2_DAT1,
-	W15_1610_MMC2_DAT2,
-	R10_1610_MMC2_DAT3,
-	Y10_1610_MMC2_CLK,
-	Y8_1610_MMC2_CMD,
-	V9_1610_MMC2_CMDDIR,
-	V5_1610_MMC2_DATDIR0,
-	W19_1610_MMC2_DATDIR1,
-	R18_1610_MMC2_CLKIN,
-
-	/* OMAP-1610 External Trace Interface */
-	M19_1610_ETM_PSTAT0,
-	L15_1610_ETM_PSTAT1,
-	L18_1610_ETM_PSTAT2,
-	L19_1610_ETM_D0,
-	J19_1610_ETM_D6,
-	J18_1610_ETM_D7,
-
-	/* OMAP16XX GPIO */
-	P20_1610_GPIO4,
-	V9_1610_GPIO7,
-	W8_1610_GPIO9,
-	N20_1610_GPIO11,
-	N19_1610_GPIO13,
-	P10_1610_GPIO22,
-	V5_1610_GPIO24,
-	AA20_1610_GPIO_41,
-	W19_1610_GPIO48,
-	M7_1610_GPIO62,
-	V14_16XX_GPIO37,
-	R9_16XX_GPIO18,
-	L14_16XX_GPIO49,
-
-	/* OMAP-1610 uWire */
-	V19_1610_UWIRE_SCLK,
-	U18_1610_UWIRE_SDI,
-	W21_1610_UWIRE_SDO,
-	N14_1610_UWIRE_CS0,
-	P15_1610_UWIRE_CS3,
-	N15_1610_UWIRE_CS1,
-
-	/* OMAP-1610 SPI */
-	U19_1610_SPIF_SCK,
-	U18_1610_SPIF_DIN,
-	P20_1610_SPIF_DIN,
-	W21_1610_SPIF_DOUT,
-	R18_1610_SPIF_DOUT,
-	N14_1610_SPIF_CS0,
-	N15_1610_SPIF_CS1,
-	T19_1610_SPIF_CS2,
-	P15_1610_SPIF_CS3,
-
-	/* OMAP-1610 Flash */
-	L3_1610_FLASH_CS2B_OE,
-	M8_1610_FLASH_CS2B_WE,
-
-	/* First MMC */
-	MMC_CMD,
-	MMC_DAT1,
-	MMC_DAT2,
-	MMC_DAT0,
-	MMC_CLK,
-	MMC_DAT3,
-
-	/* OMAP-1710 MMC CMDDIR and DATDIR0 */
-	M15_1710_MMC_CLKI,
-	P19_1710_MMC_CMDDIR,
-	P20_1710_MMC_DATDIR0,
-
-	/* OMAP-1610 USB0 alternate pin configuration */
-	W9_USB0_TXEN,
-	AA9_USB0_VP,
-	Y5_USB0_RCV,
-	R9_USB0_VM,
-	V6_USB0_TXD,
-	W5_USB0_SE0,
-	V9_USB0_SPEED,
-	V9_USB0_SUSP,
-
-	/* USB2 */
-	W9_USB2_TXEN,
-	AA9_USB2_VP,
-	Y5_USB2_RCV,
-	R9_USB2_VM,
-	V6_USB2_TXD,
-	W5_USB2_SE0,
-
-	/* 16XX UART */
-	R13_1610_UART1_TX,
-	V14_16XX_UART1_RX,
-	R14_1610_UART1_CTS,
-	AA15_1610_UART1_RTS,
-	R9_16XX_UART2_RX,
-	L14_16XX_UART3_RX,
-
-	/* I2C OMAP-1610 */
-	I2C_SCL,
-	I2C_SDA,
-
-	/* Keypad */
-	F18_1610_KBC0,
-	D20_1610_KBC1,
-	D19_1610_KBC2,
-	E18_1610_KBC3,
-	C21_1610_KBC4,
-	G18_1610_KBR0,
-	F19_1610_KBR1,
-	H14_1610_KBR2,
-	E20_1610_KBR3,
-	E19_1610_KBR4,
-	N19_1610_KBR5,
-
-	/* Power management */
-	T20_1610_LOW_PWR,
-
-	/* MCLK Settings */
-	V5_1710_MCLK_ON,
-	V5_1710_MCLK_OFF,
-	R10_1610_MCLK_ON,
-	R10_1610_MCLK_OFF,
-
-	/* CompactFlash controller */
-	P11_1610_CF_CD2,
-	R11_1610_CF_IOIS16,
-	V10_1610_CF_IREQ,
-	W10_1610_CF_RESET,
-	W11_1610_CF_CD1,
-
-	/* parallel camera */
-	J15_1610_CAM_LCLK,
-	J18_1610_CAM_D7,
-	J19_1610_CAM_D6,
-	J14_1610_CAM_D5,
-	K18_1610_CAM_D4,
-	K19_1610_CAM_D3,
-	K15_1610_CAM_D2,
-	K14_1610_CAM_D1,
-	L19_1610_CAM_D0,
-	L18_1610_CAM_VS,
-	L15_1610_CAM_HS,
-	M19_1610_CAM_RSTZ,
-	Y15_1610_CAM_OUTCLK,
-
-	/* serial camera */
-	H19_1610_CAM_EXCLK,
-	Y12_1610_CCP_CLKP,
-	W13_1610_CCP_CLKM,
-	W14_1610_CCP_DATAP,
-	Y14_1610_CCP_DATAM,
-
-};
-
-struct omap_mux_cfg {
-	struct pin_config	*pins;
-	unsigned long		size;
-	int			(*cfg_reg)(const struct pin_config *cfg);
-};
-
-#ifdef	CONFIG_OMAP_MUX
-/* setup pin muxing in Linux */
-extern int omap1_mux_init(void);
-extern int omap_mux_register(struct omap_mux_cfg *);
-extern int omap_cfg_reg(unsigned long reg_cfg);
-#else
-/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
-static inline int omap1_mux_init(void) { return 0; }
-static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; }
-#endif
-
-extern int omap2_mux_init(void);
-
-#endif
diff --git a/arch/arm/mach-omap1/include/mach/soc.h b/arch/arm/mach-omap1/include/mach/soc.h
deleted file mode 100644
index 1897cbabfc93..000000000000
--- a/arch/arm/mach-omap1/include/mach/soc.h
+++ /dev/null
@@ -1,220 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * OMAP cpu type detection
- *
- * Copyright (C) 2004, 2008 Nokia Corporation
- *
- * Copyright (C) 2009-11 Texas Instruments.
- *
- * Written by Tony Lindgren <tony.lindgren@nokia.com>
- *
- * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
- */
-
-#ifndef __ASM_ARCH_OMAP_CPU_H
-#define __ASM_ARCH_OMAP_CPU_H
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-
-#ifndef __ASSEMBLY__
-
-#include <linux/bitops.h>
-
-/*
- * Test if multicore OMAP support is needed
- */
-#undef MULTI_OMAP1
-#undef OMAP_NAME
-
-#ifdef CONFIG_ARCH_OMAP730
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap730
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap850
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap1510
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap16xx
-# endif
-#endif
-
-/*
- * omap_rev bits:
- * CPU id bits	(0730, 1510, 1710, 2422...)	[31:16]
- * CPU revision	(See _REV_ defined in cpu.h)	[15:08]
- * CPU class bits (15xx, 16xx, 24xx, 34xx...)	[07:00]
- */
-unsigned int omap_rev(void);
-
-/*
- * Get the CPU revision for OMAP devices
- */
-#define GET_OMAP_REVISION()	((omap_rev() >> 8) & 0xff)
-
-/*
- * Macros to group OMAP into cpu classes.
- * These can be used in most places.
- * cpu_is_omap7xx():	True for OMAP730, OMAP850
- * cpu_is_omap15xx():	True for OMAP1510, OMAP5910 and OMAP310
- * cpu_is_omap16xx():	True for OMAP1610, OMAP5912 and OMAP1710
- */
-#define GET_OMAP_CLASS	(omap_rev() & 0xff)
-
-#define IS_OMAP_CLASS(class, id)			\
-static inline int is_omap ##class (void)		\
-{							\
-	return (GET_OMAP_CLASS == (id)) ? 1 : 0;	\
-}
-
-#define GET_OMAP_SUBCLASS	((omap_rev() >> 20) & 0x0fff)
-
-#define IS_OMAP_SUBCLASS(subclass, id)			\
-static inline int is_omap ##subclass (void)		\
-{							\
-	return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;	\
-}
-
-IS_OMAP_CLASS(7xx, 0x07)
-IS_OMAP_CLASS(15xx, 0x15)
-IS_OMAP_CLASS(16xx, 0x16)
-
-#define cpu_is_omap7xx()		0
-#define cpu_is_omap15xx()		0
-#define cpu_is_omap16xx()		0
-
-#if defined(MULTI_OMAP1)
-# if defined(CONFIG_ARCH_OMAP730)
-#  undef  cpu_is_omap7xx
-#  define cpu_is_omap7xx()		is_omap7xx()
-# endif
-# if defined(CONFIG_ARCH_OMAP850)
-#  undef  cpu_is_omap7xx
-#  define cpu_is_omap7xx()		is_omap7xx()
-# endif
-# if defined(CONFIG_ARCH_OMAP15XX)
-#  undef  cpu_is_omap15xx
-#  define cpu_is_omap15xx()		is_omap15xx()
-# endif
-# if defined(CONFIG_ARCH_OMAP16XX)
-#  undef  cpu_is_omap16xx
-#  define cpu_is_omap16xx()		is_omap16xx()
-# endif
-#else
-# if defined(CONFIG_ARCH_OMAP730)
-#  undef  cpu_is_omap7xx
-#  define cpu_is_omap7xx()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP850)
-#  undef  cpu_is_omap7xx
-#  define cpu_is_omap7xx()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP15XX)
-#  undef  cpu_is_omap15xx
-#  define cpu_is_omap15xx()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP16XX)
-#  undef  cpu_is_omap16xx
-#  define cpu_is_omap16xx()		1
-# endif
-#endif
-
-/*
- * Macros to detect individual cpu types.
- * These are only rarely needed.
- * cpu_is_omap310():	True for OMAP310
- * cpu_is_omap1510():	True for OMAP1510
- * cpu_is_omap1610():	True for OMAP1610
- * cpu_is_omap1611():	True for OMAP1611
- * cpu_is_omap5912():	True for OMAP5912
- * cpu_is_omap1621():	True for OMAP1621
- * cpu_is_omap1710():	True for OMAP1710
- */
-#define GET_OMAP_TYPE	((omap_rev() >> 16) & 0xffff)
-
-#define IS_OMAP_TYPE(type, id)				\
-static inline int is_omap ##type (void)			\
-{							\
-	return (GET_OMAP_TYPE == (id)) ? 1 : 0;		\
-}
-
-IS_OMAP_TYPE(310, 0x0310)
-IS_OMAP_TYPE(1510, 0x1510)
-IS_OMAP_TYPE(1610, 0x1610)
-IS_OMAP_TYPE(1611, 0x1611)
-IS_OMAP_TYPE(5912, 0x1611)
-IS_OMAP_TYPE(1621, 0x1621)
-IS_OMAP_TYPE(1710, 0x1710)
-
-#define cpu_is_omap310()		0
-#define cpu_is_omap1510()		0
-#define cpu_is_omap1610()		0
-#define cpu_is_omap5912()		0
-#define cpu_is_omap1611()		0
-#define cpu_is_omap1621()		0
-#define cpu_is_omap1710()		0
-
-/* These are needed to compile common code */
-#ifdef CONFIG_ARCH_OMAP1
-#define cpu_is_omap242x()		0
-#define cpu_is_omap2430()		0
-#define cpu_is_omap243x()		0
-#define cpu_is_omap24xx()		0
-#define cpu_is_omap34xx()		0
-#define cpu_is_omap44xx()		0
-#define soc_is_omap54xx()		0
-#define soc_is_dra7xx()			0
-#define soc_is_am33xx()			0
-#define cpu_class_is_omap1()		1
-#define cpu_class_is_omap2()		0
-#endif
-
-/*
- * Whether we have MULTI_OMAP1 or not, we still need to distinguish
- * between 310 vs. 1510 and 1611B/5912 vs. 1710.
- */
-
-#if defined(CONFIG_ARCH_OMAP15XX)
-# undef  cpu_is_omap310
-# undef  cpu_is_omap1510
-# define cpu_is_omap310()		is_omap310()
-# define cpu_is_omap1510()		is_omap1510()
-#endif
-
-#if defined(CONFIG_ARCH_OMAP16XX)
-# undef  cpu_is_omap1610
-# undef  cpu_is_omap1611
-# undef  cpu_is_omap5912
-# undef  cpu_is_omap1621
-# undef  cpu_is_omap1710
-# define cpu_is_omap1610()		is_omap1610()
-# define cpu_is_omap1611()		is_omap1611()
-# define cpu_is_omap5912()		is_omap5912()
-# define cpu_is_omap1621()		is_omap1621()
-# define cpu_is_omap1710()		is_omap1710()
-#endif
-
-#endif	/* __ASSEMBLY__ */
-#endif
diff --git a/arch/arm/mach-omap1/include/mach/uncompress.h b/arch/arm/mach-omap1/include/mach/uncompress.h
deleted file mode 100644
index 9cca6a56788f..000000000000
--- a/arch/arm/mach-omap1/include/mach/uncompress.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/uncompress.h
- *
- * Serial port stubs for kernel decompress status messages
- *
- * Initially based on:
- * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * Rewritten by:
- * Author: <source@mvista.com>
- * 2004 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/types.h>
-#include <linux/serial_reg.h>
-
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-
-#include "serial.h"
-
-#define MDR1_MODE_MASK			0x07
-
-volatile u8 *uart_base;
-int uart_shift;
-
-/*
- * Store the DEBUG_LL uart number into memory.
- * See also debug-macro.S, and serial.c for related code.
- */
-static void set_omap_uart_info(unsigned char port)
-{
-	/*
-	 * Get address of some.bss variable and round it down
-	 * a la CONFIG_AUTO_ZRELADDR.
-	 */
-	u32 ram_start = (u32)&uart_shift & 0xf8000000;
-	u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS);
-	*uart_info = port;
-}
-
-static inline void putc(int c)
-{
-	if (!uart_base)
-		return;
-
-	/* Check for UART 16x mode */
-	if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0)
-		return;
-
-	while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE))
-		barrier();
-	uart_base[UART_TX << uart_shift] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * Macros to configure UART1 and debug UART
- */
-#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id)		\
-	if (machine_is_##mach()) {					\
-		uart_base = (volatile u8 *)(dbg_uart);			\
-		uart_shift = (dbg_shft);				\
-		port = (dbg_id);					\
-		set_omap_uart_info(port);				\
-		break;							\
-	}
-
-#define DEBUG_LL_OMAP7XX(p, mach)					\
-	_DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT,	\
-		OMAP1UART##p)
-
-#define DEBUG_LL_OMAP1(p, mach)						\
-	_DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT,	\
-		OMAP1UART##p)
-
-static inline void arch_decomp_setup(void)
-{
-	int port = 0;
-
-	/*
-	 * Initialize the port based on the machine ID from the bootloader.
-	 * Note that we're using macros here instead of switch statement
-	 * as machine_is functions are optimized out for the boards that
-	 * are not selected.
-	 */
-	do {
-		/* omap7xx/8xx based boards using UART1 with shift 0 */
-		DEBUG_LL_OMAP7XX(1, herald);
-		DEBUG_LL_OMAP7XX(1, omap_perseus2);
-
-		/* omap15xx/16xx based boards using UART1 */
-		DEBUG_LL_OMAP1(1, ams_delta);
-		DEBUG_LL_OMAP1(1, nokia770);
-		DEBUG_LL_OMAP1(1, omap_h2);
-		DEBUG_LL_OMAP1(1, omap_h3);
-		DEBUG_LL_OMAP1(1, omap_innovator);
-		DEBUG_LL_OMAP1(1, omap_osk);
-		DEBUG_LL_OMAP1(1, omap_palmte);
-		DEBUG_LL_OMAP1(1, omap_palmz71);
-
-		/* omap15xx/16xx based boards using UART2 */
-		DEBUG_LL_OMAP1(2, omap_palmtt);
-
-		/* omap15xx/16xx based boards using UART3 */
-		DEBUG_LL_OMAP1(3, sx1);
-	} while (0);
-}
diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/arch/arm/mach-omap1/include/mach/usb.h
deleted file mode 100644
index 5429d86c7190..000000000000
--- a/arch/arm/mach-omap1/include/mach/usb.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * FIXME correct answer depends on hmc_mode,
- * as does (on omap1) any nonzero value for config->otg port number
- */
-#if IS_ENABLED(CONFIG_USB_OMAP)
-#define	is_usb0_device(config)	1
-#else
-#define	is_usb0_device(config)	0
-#endif
-
-#include <linux/platform_data/usb-omap1.h>
-
-#if IS_ENABLED(CONFIG_USB_SUPPORT)
-void omap1_usb_init(struct omap_usb_config *pdata);
-#else
-static inline void omap1_usb_init(struct omap_usb_config *pdata)
-{
-}
-#endif
-
-#define OMAP1_OTG_BASE			0xfffb0400
-#define OMAP1_UDC_BASE			0xfffb4000
-#define OMAP1_OHCI_BASE			0xfffba000
-
-#define OMAP2_OHCI_BASE			0x4805e000
-#define OMAP2_UDC_BASE			0x4805e200
-#define OMAP2_OTG_BASE			0x4805e300
-#define OTG_BASE			OMAP1_OTG_BASE
-#define UDC_BASE			OMAP1_UDC_BASE
-#define OMAP_OHCI_BASE			OMAP1_OHCI_BASE
-
-/*
- * OTG and transceiver registers, for OMAPs starting with ARM926
- */
-#define OTG_REV				(OTG_BASE + 0x00)
-#define OTG_SYSCON_1			(OTG_BASE + 0x04)
-#	define	 USB2_TRX_MODE(w)	(((w)>>24)&0x07)
-#	define	 USB1_TRX_MODE(w)	(((w)>>20)&0x07)
-#	define	 USB0_TRX_MODE(w)	(((w)>>16)&0x07)
-#	define	 OTG_IDLE_EN		(1 << 15)
-#	define	 HST_IDLE_EN		(1 << 14)
-#	define	 DEV_IDLE_EN		(1 << 13)
-#	define	 OTG_RESET_DONE		(1 << 2)
-#	define	 OTG_SOFT_RESET		(1 << 1)
-#define OTG_SYSCON_2			(OTG_BASE + 0x08)
-#	define	 OTG_EN			(1 << 31)
-#	define	 USBX_SYNCHRO		(1 << 30)
-#	define	 OTG_MST16		(1 << 29)
-#	define	 SRP_GPDATA		(1 << 28)
-#	define	 SRP_GPDVBUS		(1 << 27)
-#	define	 SRP_GPUVBUS(w)		(((w)>>24)&0x07)
-#	define	 A_WAIT_VRISE(w)	(((w)>>20)&0x07)
-#	define	 B_ASE_BRST(w)		(((w)>>16)&0x07)
-#	define	 SRP_DPW		(1 << 14)
-#	define	 SRP_DATA		(1 << 13)
-#	define	 SRP_VBUS		(1 << 12)
-#	define	 OTG_PADEN		(1 << 10)
-#	define	 HMC_PADEN		(1 << 9)
-#	define	 UHOST_EN		(1 << 8)
-#	define	 HMC_TLLSPEED		(1 << 7)
-#	define	 HMC_TLLATTACH		(1 << 6)
-#	define	 OTG_HMC(w)		(((w)>>0)&0x3f)
-#define OTG_CTRL			(OTG_BASE + 0x0c)
-#	define	 OTG_USB2_EN		(1 << 29)
-#	define	 OTG_USB2_DP		(1 << 28)
-#	define	 OTG_USB2_DM		(1 << 27)
-#	define	 OTG_USB1_EN		(1 << 26)
-#	define	 OTG_USB1_DP		(1 << 25)
-#	define	 OTG_USB1_DM		(1 << 24)
-#	define	 OTG_USB0_EN		(1 << 23)
-#	define	 OTG_USB0_DP		(1 << 22)
-#	define	 OTG_USB0_DM		(1 << 21)
-#	define	 OTG_ASESSVLD		(1 << 20)
-#	define	 OTG_BSESSEND		(1 << 19)
-#	define	 OTG_BSESSVLD		(1 << 18)
-#	define	 OTG_VBUSVLD		(1 << 17)
-#	define	 OTG_ID			(1 << 16)
-#	define	 OTG_DRIVER_SEL		(1 << 15)
-#	define	 OTG_A_SETB_HNPEN	(1 << 12)
-#	define	 OTG_A_BUSREQ		(1 << 11)
-#	define	 OTG_B_HNPEN		(1 << 9)
-#	define	 OTG_B_BUSREQ		(1 << 8)
-#	define	 OTG_BUSDROP		(1 << 7)
-#	define	 OTG_PULLDOWN		(1 << 5)
-#	define	 OTG_PULLUP		(1 << 4)
-#	define	 OTG_DRV_VBUS		(1 << 3)
-#	define	 OTG_PD_VBUS		(1 << 2)
-#	define	 OTG_PU_VBUS		(1 << 1)
-#	define	 OTG_PU_ID		(1 << 0)
-#define OTG_IRQ_EN			(OTG_BASE + 0x10)	/* 16-bit */
-#	define	 DRIVER_SWITCH		(1 << 15)
-#	define	 A_VBUS_ERR		(1 << 13)
-#	define	 A_REQ_TMROUT		(1 << 12)
-#	define	 A_SRP_DETECT		(1 << 11)
-#	define	 B_HNP_FAIL		(1 << 10)
-#	define	 B_SRP_TMROUT		(1 << 9)
-#	define	 B_SRP_DONE		(1 << 8)
-#	define	 B_SRP_STARTED		(1 << 7)
-#	define	 OPRT_CHG		(1 << 0)
-#define OTG_IRQ_SRC			(OTG_BASE + 0x14)	/* 16-bit */
-	// same bits as in IRQ_EN
-#define OTG_OUTCTRL			(OTG_BASE + 0x18)	/* 16-bit */
-#	define	 OTGVPD			(1 << 14)
-#	define	 OTGVPU			(1 << 13)
-#	define	 OTGPUID		(1 << 12)
-#	define	 USB2VDR		(1 << 10)
-#	define	 USB2PDEN		(1 << 9)
-#	define	 USB2PUEN		(1 << 8)
-#	define	 USB1VDR		(1 << 6)
-#	define	 USB1PDEN		(1 << 5)
-#	define	 USB1PUEN		(1 << 4)
-#	define	 USB0VDR		(1 << 2)
-#	define	 USB0PDEN		(1 << 1)
-#	define	 USB0PUEN		(1 << 0)
-#define OTG_TEST			(OTG_BASE + 0x20)	/* 16-bit */
-#define OTG_VENDOR_CODE			(OTG_BASE + 0xfc)	/* 16-bit */
-
-/*-------------------------------------------------------------------------*/
-
-/* OMAP1 */
-#define	USB_TRANSCEIVER_CTRL		(0xfffe1000 + 0x0064)
-#	define	CONF_USB2_UNI_R		(1 << 8)
-#	define	CONF_USB1_UNI_R		(1 << 7)
-#	define	CONF_USB_PORT0_R(x)	(((x)>>4)&0x7)
-#	define	CONF_USB0_ISOLATE_R	(1 << 3)
-#	define	CONF_USB_PWRDN_DM_R	(1 << 2)
-#	define	CONF_USB_PWRDN_DP_R	(1 << 1)
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 5a173fc2a1ca..d2db9b8aed3f 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -9,17 +9,14 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/omap-dma.h>
 
 #include <asm/tlb.h>
 #include <asm/mach/map.h>
 
-#include <mach/mux.h>
-#include <mach/tc.h>
-#include <linux/omap-dma.h>
-
+#include "tc.h"
 #include "iomap.h"
 #include "common.h"
-#include "clock.h"
 
 /*
  * The machine specific code may provide the extra mapping besides the
@@ -126,11 +123,6 @@ void __init omap1_init_early(void)
 	 */
 	omap_writew(0x0, MPU_PUBLIC_TIPB_CNTL);
 	omap_writew(0x0, MPU_PRIVATE_TIPB_CNTL);
-
-	/* Must init clocks early to assure that timer interrupt works
-	 */
-	omap1_clk_init();
-	omap1_mux_init();
 }
 
 void __init omap1_init_late(void)
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index ee6a93083154..70868e9f19ac 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -47,9 +47,7 @@
 #include <asm/mach/irq.h>
 
 #include "soc.h"
-
-#include <mach/hardware.h>
-
+#include "hardware.h"
 #include "common.h"
 
 #define IRQ_BANK(irq) ((irq) >> 5)
diff --git a/arch/arm/mach-omap1/include/mach/irqs.h b/arch/arm/mach-omap1/irqs.h
index 30bf007700cf..2851acfe5ff3 100644
--- a/arch/arm/mach-omap1/include/mach/irqs.h
+++ b/arch/arm/mach-omap1/irqs.h
@@ -1,7 +1,5 @@
 /* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
- *  arch/arm/plat-omap/include/mach/irqs.h
- *
  *  Copyright (C) Greg Lonnon 2001
  *  Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
  *
diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c
deleted file mode 100644
index a72ac0c02b4f..000000000000
--- a/arch/arm/mach-omap1/lcd_dma.c
+++ /dev/null
@@ -1,441 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-omap1/lcd_dma.c
- *
- * Extracted from arch/arm/plat-omap/dma.c
- * Copyright (C) 2003 - 2008 Nokia Corporation
- * Author: Juha Yrjölä <juha.yrjola@nokia.com>
- * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com>
- * Graphics DMA and LCD DMA graphics tranformations
- * by Imre Deak <imre.deak@nokia.com>
- * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc.
- * Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com>
- * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * Support functions for the OMAP internal DMA channels.
- */
-
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-
-#include <linux/omap-dma.h>
-
-#include <mach/hardware.h>
-#include <mach/lcdc.h>
-
-int omap_lcd_dma_running(void)
-{
-	/*
-	 * On OMAP1510, internal LCD controller will start the transfer
-	 * when it gets enabled, so assume DMA running if LCD enabled.
-	 */
-	if (cpu_is_omap15xx())
-		if (omap_readw(OMAP_LCDC_CONTROL) & OMAP_LCDC_CTRL_LCD_EN)
-			return 1;
-
-	/* Check if LCD DMA is running */
-	if (cpu_is_omap16xx())
-		if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN)
-			return 1;
-
-	return 0;
-}
-
-static struct lcd_dma_info {
-	spinlock_t lock;
-	int reserved;
-	void (*callback)(u16 status, void *data);
-	void *cb_data;
-
-	int active;
-	unsigned long addr;
-	int rotate, data_type, xres, yres;
-	int vxres;
-	int mirror;
-	int xscale, yscale;
-	int ext_ctrl;
-	int src_port;
-	int single_transfer;
-} lcd_dma;
-
-void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
-			 int data_type)
-{
-	lcd_dma.addr = addr;
-	lcd_dma.data_type = data_type;
-	lcd_dma.xres = fb_xres;
-	lcd_dma.yres = fb_yres;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_b1);
-
-void omap_set_lcd_dma_ext_controller(int external)
-{
-	lcd_dma.ext_ctrl = external;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller);
-
-void omap_set_lcd_dma_single_transfer(int single)
-{
-	lcd_dma.single_transfer = single;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer);
-
-void omap_set_lcd_dma_b1_rotation(int rotate)
-{
-	if (cpu_is_omap15xx()) {
-		printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n");
-		BUG();
-		return;
-	}
-	lcd_dma.rotate = rotate;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation);
-
-void omap_set_lcd_dma_b1_mirror(int mirror)
-{
-	if (cpu_is_omap15xx()) {
-		printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n");
-		BUG();
-	}
-	lcd_dma.mirror = mirror;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror);
-
-void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
-{
-	if (cpu_is_omap15xx()) {
-		pr_err("DMA virtual resolution is not supported in 1510 mode\n");
-		BUG();
-	}
-	lcd_dma.vxres = vxres;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres);
-
-void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale)
-{
-	if (cpu_is_omap15xx()) {
-		printk(KERN_ERR "DMA scale is not supported in 1510 mode\n");
-		BUG();
-	}
-	lcd_dma.xscale = xscale;
-	lcd_dma.yscale = yscale;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_b1_scale);
-
-static void set_b1_regs(void)
-{
-	unsigned long top, bottom;
-	int es;
-	u16 w;
-	unsigned long en, fn;
-	long ei, fi;
-	unsigned long vxres;
-	unsigned int xscale, yscale;
-
-	switch (lcd_dma.data_type) {
-	case OMAP_DMA_DATA_TYPE_S8:
-		es = 1;
-		break;
-	case OMAP_DMA_DATA_TYPE_S16:
-		es = 2;
-		break;
-	case OMAP_DMA_DATA_TYPE_S32:
-		es = 4;
-		break;
-	default:
-		BUG();
-		return;
-	}
-
-	vxres = lcd_dma.vxres ? lcd_dma.vxres : lcd_dma.xres;
-	xscale = lcd_dma.xscale ? lcd_dma.xscale : 1;
-	yscale = lcd_dma.yscale ? lcd_dma.yscale : 1;
-	BUG_ON(vxres < lcd_dma.xres);
-
-#define PIXADDR(x, y) (lcd_dma.addr +					\
-		((y) * vxres * yscale + (x) * xscale) * es)
-#define PIXSTEP(sx, sy, dx, dy) (PIXADDR(dx, dy) - PIXADDR(sx, sy) - es + 1)
-
-	switch (lcd_dma.rotate) {
-	case 0:
-		if (!lcd_dma.mirror) {
-			top = PIXADDR(0, 0);
-			bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
-			/* 1510 DMA requires the bottom address to be 2 more
-			 * than the actual last memory access location. */
-			if (cpu_is_omap15xx() &&
-				lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32)
-					bottom += 2;
-			ei = PIXSTEP(0, 0, 1, 0);
-			fi = PIXSTEP(lcd_dma.xres - 1, 0, 0, 1);
-		} else {
-			top = PIXADDR(lcd_dma.xres - 1, 0);
-			bottom = PIXADDR(0, lcd_dma.yres - 1);
-			ei = PIXSTEP(1, 0, 0, 0);
-			fi = PIXSTEP(0, 0, lcd_dma.xres - 1, 1);
-		}
-		en = lcd_dma.xres;
-		fn = lcd_dma.yres;
-		break;
-	case 90:
-		if (!lcd_dma.mirror) {
-			top = PIXADDR(0, lcd_dma.yres - 1);
-			bottom = PIXADDR(lcd_dma.xres - 1, 0);
-			ei = PIXSTEP(0, 1, 0, 0);
-			fi = PIXSTEP(0, 0, 1, lcd_dma.yres - 1);
-		} else {
-			top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
-			bottom = PIXADDR(0, 0);
-			ei = PIXSTEP(0, 1, 0, 0);
-			fi = PIXSTEP(1, 0, 0, lcd_dma.yres - 1);
-		}
-		en = lcd_dma.yres;
-		fn = lcd_dma.xres;
-		break;
-	case 180:
-		if (!lcd_dma.mirror) {
-			top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
-			bottom = PIXADDR(0, 0);
-			ei = PIXSTEP(1, 0, 0, 0);
-			fi = PIXSTEP(0, 1, lcd_dma.xres - 1, 0);
-		} else {
-			top = PIXADDR(0, lcd_dma.yres - 1);
-			bottom = PIXADDR(lcd_dma.xres - 1, 0);
-			ei = PIXSTEP(0, 0, 1, 0);
-			fi = PIXSTEP(lcd_dma.xres - 1, 1, 0, 0);
-		}
-		en = lcd_dma.xres;
-		fn = lcd_dma.yres;
-		break;
-	case 270:
-		if (!lcd_dma.mirror) {
-			top = PIXADDR(lcd_dma.xres - 1, 0);
-			bottom = PIXADDR(0, lcd_dma.yres - 1);
-			ei = PIXSTEP(0, 0, 0, 1);
-			fi = PIXSTEP(1, lcd_dma.yres - 1, 0, 0);
-		} else {
-			top = PIXADDR(0, 0);
-			bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
-			ei = PIXSTEP(0, 0, 0, 1);
-			fi = PIXSTEP(0, lcd_dma.yres - 1, 1, 0);
-		}
-		en = lcd_dma.yres;
-		fn = lcd_dma.xres;
-		break;
-	default:
-		BUG();
-		return;	/* Suppress warning about uninitialized vars */
-	}
-
-	if (cpu_is_omap15xx()) {
-		omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U);
-		omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L);
-		omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U);
-		omap_writew(bottom, OMAP1510_DMA_LCD_BOT_F1_L);
-
-		return;
-	}
-
-	/* 1610 regs */
-	omap_writew(top >> 16, OMAP1610_DMA_LCD_TOP_B1_U);
-	omap_writew(top, OMAP1610_DMA_LCD_TOP_B1_L);
-	omap_writew(bottom >> 16, OMAP1610_DMA_LCD_BOT_B1_U);
-	omap_writew(bottom, OMAP1610_DMA_LCD_BOT_B1_L);
-
-	omap_writew(en, OMAP1610_DMA_LCD_SRC_EN_B1);
-	omap_writew(fn, OMAP1610_DMA_LCD_SRC_FN_B1);
-
-	w = omap_readw(OMAP1610_DMA_LCD_CSDP);
-	w &= ~0x03;
-	w |= lcd_dma.data_type;
-	omap_writew(w, OMAP1610_DMA_LCD_CSDP);
-
-	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
-	/* Always set the source port as SDRAM for now*/
-	w &= ~(0x03 << 6);
-	if (lcd_dma.callback != NULL)
-		w |= 1 << 1;		/* Block interrupt enable */
-	else
-		w &= ~(1 << 1);
-	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
-
-	if (!(lcd_dma.rotate || lcd_dma.mirror ||
-	      lcd_dma.vxres || lcd_dma.xscale || lcd_dma.yscale))
-		return;
-
-	w = omap_readw(OMAP1610_DMA_LCD_CCR);
-	/* Set the double-indexed addressing mode */
-	w |= (0x03 << 12);
-	omap_writew(w, OMAP1610_DMA_LCD_CCR);
-
-	omap_writew(ei, OMAP1610_DMA_LCD_SRC_EI_B1);
-	omap_writew(fi >> 16, OMAP1610_DMA_LCD_SRC_FI_B1_U);
-	omap_writew(fi, OMAP1610_DMA_LCD_SRC_FI_B1_L);
-}
-
-static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id)
-{
-	u16 w;
-
-	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
-	if (unlikely(!(w & (1 << 3)))) {
-		printk(KERN_WARNING "Spurious LCD DMA IRQ\n");
-		return IRQ_NONE;
-	}
-	/* Ack the IRQ */
-	w |= (1 << 3);
-	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
-	lcd_dma.active = 0;
-	if (lcd_dma.callback != NULL)
-		lcd_dma.callback(w, lcd_dma.cb_data);
-
-	return IRQ_HANDLED;
-}
-
-int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
-			 void *data)
-{
-	spin_lock_irq(&lcd_dma.lock);
-	if (lcd_dma.reserved) {
-		spin_unlock_irq(&lcd_dma.lock);
-		printk(KERN_ERR "LCD DMA channel already reserved\n");
-		BUG();
-		return -EBUSY;
-	}
-	lcd_dma.reserved = 1;
-	spin_unlock_irq(&lcd_dma.lock);
-	lcd_dma.callback = callback;
-	lcd_dma.cb_data = data;
-	lcd_dma.active = 0;
-	lcd_dma.single_transfer = 0;
-	lcd_dma.rotate = 0;
-	lcd_dma.vxres = 0;
-	lcd_dma.mirror = 0;
-	lcd_dma.xscale = 0;
-	lcd_dma.yscale = 0;
-	lcd_dma.ext_ctrl = 0;
-	lcd_dma.src_port = 0;
-
-	return 0;
-}
-EXPORT_SYMBOL(omap_request_lcd_dma);
-
-void omap_free_lcd_dma(void)
-{
-	spin_lock(&lcd_dma.lock);
-	if (!lcd_dma.reserved) {
-		spin_unlock(&lcd_dma.lock);
-		printk(KERN_ERR "LCD DMA is not reserved\n");
-		BUG();
-		return;
-	}
-	if (!cpu_is_omap15xx())
-		omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1,
-			    OMAP1610_DMA_LCD_CCR);
-	lcd_dma.reserved = 0;
-	spin_unlock(&lcd_dma.lock);
-}
-EXPORT_SYMBOL(omap_free_lcd_dma);
-
-void omap_enable_lcd_dma(void)
-{
-	u16 w;
-
-	/*
-	 * Set the Enable bit only if an external controller is
-	 * connected. Otherwise the OMAP internal controller will
-	 * start the transfer when it gets enabled.
-	 */
-	if (cpu_is_omap15xx() || !lcd_dma.ext_ctrl)
-		return;
-
-	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
-	w |= 1 << 8;
-	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
-
-	lcd_dma.active = 1;
-
-	w = omap_readw(OMAP1610_DMA_LCD_CCR);
-	w |= 1 << 7;
-	omap_writew(w, OMAP1610_DMA_LCD_CCR);
-}
-EXPORT_SYMBOL(omap_enable_lcd_dma);
-
-void omap_setup_lcd_dma(void)
-{
-	BUG_ON(lcd_dma.active);
-	if (!cpu_is_omap15xx()) {
-		/* Set some reasonable defaults */
-		omap_writew(0x5440, OMAP1610_DMA_LCD_CCR);
-		omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP);
-		omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL);
-	}
-	set_b1_regs();
-	if (!cpu_is_omap15xx()) {
-		u16 w;
-
-		w = omap_readw(OMAP1610_DMA_LCD_CCR);
-		/*
-		 * If DMA was already active set the end_prog bit to have
-		 * the programmed register set loaded into the active
-		 * register set.
-		 */
-		w |= 1 << 11;		/* End_prog */
-		if (!lcd_dma.single_transfer)
-			w |= (3 << 8);	/* Auto_init, repeat */
-		omap_writew(w, OMAP1610_DMA_LCD_CCR);
-	}
-}
-EXPORT_SYMBOL(omap_setup_lcd_dma);
-
-void omap_stop_lcd_dma(void)
-{
-	u16 w;
-
-	lcd_dma.active = 0;
-	if (cpu_is_omap15xx() || !lcd_dma.ext_ctrl)
-		return;
-
-	w = omap_readw(OMAP1610_DMA_LCD_CCR);
-	w &= ~(1 << 7);
-	omap_writew(w, OMAP1610_DMA_LCD_CCR);
-
-	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
-	w &= ~(1 << 8);
-	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
-}
-EXPORT_SYMBOL(omap_stop_lcd_dma);
-
-static int __init omap_init_lcd_dma(void)
-{
-	int r;
-
-	if (!cpu_class_is_omap1())
-		return -ENODEV;
-
-	if (cpu_is_omap16xx()) {
-		u16 w;
-
-		/* this would prevent OMAP sleep */
-		w = omap_readw(OMAP1610_DMA_LCD_CTRL);
-		w &= ~(1 << 8);
-		omap_writew(w, OMAP1610_DMA_LCD_CTRL);
-	}
-
-	spin_lock_init(&lcd_dma.lock);
-
-	r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0,
-			"LCD DMA", NULL);
-	if (r != 0)
-		pr_err("unable to request IRQ for LCD DMA (error %d)\n", r);
-
-	return r;
-}
-
-arch_initcall(omap_init_lcd_dma);
-
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index f36c34f47f11..05c25c432449 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -15,14 +15,13 @@
 #include <linux/io.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
-
 #include <linux/omap-dma.h>
-#include <mach/mux.h>
-#include "soc.h"
+#include <linux/soc/ti/omap1-io.h>
 #include <linux/platform_data/asoc-ti-mcbsp.h>
 
-#include <mach/irqs.h>
-
+#include "mux.h"
+#include "soc.h"
+#include "irqs.h"
 #include "iomap.h"
 
 #define DPS_RSTCT2_PER_EN	(1 << 0)
@@ -44,8 +43,8 @@ static void omap1_mcbsp_request(unsigned int id)
 			api_clk = clk_get(NULL, "api_ck");
 			dsp_clk = clk_get(NULL, "dsp_ck");
 			if (!IS_ERR(api_clk) && !IS_ERR(dsp_clk)) {
-				clk_enable(api_clk);
-				clk_enable(dsp_clk);
+				clk_prepare_enable(api_clk);
+				clk_prepare_enable(dsp_clk);
 
 				/*
 				 * DSP external peripheral reset
@@ -63,11 +62,11 @@ static void omap1_mcbsp_free(unsigned int id)
 	if (id == 0 || id == 2) {
 		if (--dsp_use == 0) {
 			if (!IS_ERR(api_clk)) {
-				clk_disable(api_clk);
+				clk_disable_unprepare(api_clk);
 				clk_put(api_clk);
 			}
 			if (!IS_ERR(dsp_clk)) {
-				clk_disable(dsp_clk);
+				clk_disable_unprepare(dsp_clk);
 				clk_put(dsp_clk);
 			}
 		}
diff --git a/arch/arm/mach-omap1/include/mach/mtd-xip.h b/arch/arm/mach-omap1/mtd-xip.h
index d09b2bc4920f..5ae312ff08a1 100644
--- a/arch/arm/mach-omap1/include/mach/mtd-xip.h
+++ b/arch/arm/mach-omap1/mtd-xip.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * MTD primitives for XIP support. Architecture specific functions.
  *
@@ -5,16 +6,14 @@
  *
  * Author: Vladimir Barinov <vbarinov@embeddedalley.com>
  *
- * (c) 2005 MontaVista Software, Inc.  This file is licensed under the
- * terms of the GNU General Public License version 2.  This program is
- * licensed "as is" without any warranty of any kind, whether express or
- * implied.
+ * (c) 2005 MontaVista Software, Inc.
  */
 
 #ifndef __ARCH_OMAP_MTD_XIP_H__
 #define __ARCH_OMAP_MTD_XIP_H__
 
-#include <mach/hardware.h>
+#include "hardware.h"
+#include <linux/soc/ti/omap1-io.h>
 #define OMAP_MPU_TIMER_BASE	(0xfffec500)
 #define OMAP_MPU_TIMER_OFFSET	0x100
 
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
index 972665bf52d6..2d9458ff1d29 100644
--- a/arch/arm/mach-omap1/mux.c
+++ b/arch/arm/mach-omap1/mux.c
@@ -12,10 +12,10 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/spinlock.h>
+#include <linux/soc/ti/omap1-io.h>
 
-#include <mach/hardware.h>
-
-#include <mach/mux.h>
+#include "hardware.h"
+#include "mux.h"
 
 #ifdef CONFIG_OMAP_MUX
 
diff --git a/arch/arm/mach-omap1/mux.h b/arch/arm/mach-omap1/mux.h
new file mode 100644
index 000000000000..3e7ed3348a55
--- /dev/null
+++ b/arch/arm/mach-omap1/mux.h
@@ -0,0 +1,144 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Table of the Omap register configurations for the FUNC_MUX and
+ * PULL_DWN combinations.
+ *
+ * Copyright (C) 2004 - 2008 Texas Instruments Inc.
+ * Copyright (C) 2003 - 2008 Nokia Corporation
+ *
+ * Written by Tony Lindgren
+ *
+ * NOTE: Please use the following naming style for new pin entries.
+ *	 For example, W8_1610_MMC2_DAT0, where:
+ *	 - W8	     = ball
+ *	 - 1610	     = 1510 or 1610, none if common for both 1510 and 1610
+ *	 - MMC2_DAT0 = function
+ */
+
+#ifndef __ASM_ARCH_MUX_H
+#define __ASM_ARCH_MUX_H
+
+#include <linux/soc/ti/omap1-mux.h>
+
+#define PU_PD_SEL_NA		0	/* No pu_pd reg available */
+#define PULL_DWN_CTRL_NA	0	/* No pull-down control needed */
+
+#ifdef	CONFIG_OMAP_MUX_DEBUG
+#define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \
+					.mux_reg = FUNC_MUX_CTRL_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG(reg, bit, status)	.pull_name = "PULL_DWN_CTRL_"#reg, \
+					.pull_reg = PULL_DWN_CTRL_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
+#define PU_PD_REG(reg, status)		.pu_pd_name = "PU_PD_SEL_"#reg, \
+					.pu_pd_reg = PU_PD_SEL_##reg, \
+					.pu_pd_val = status,
+
+#define MUX_REG_7XX(reg, mode_offset, mode) .mux_reg_name = "OMAP7XX_IO_CONF_"#reg, \
+					.mux_reg = OMAP7XX_IO_CONF_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG_7XX(reg, bit, status)	.pull_name = "OMAP7XX_IO_CONF_"#reg, \
+					.pull_reg = OMAP7XX_IO_CONF_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
+#else
+
+#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG(reg, bit, status)	.pull_reg = PULL_DWN_CTRL_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
+#define PU_PD_REG(reg, status)		.pu_pd_reg = PU_PD_SEL_##reg, \
+					.pu_pd_val = status,
+
+#define MUX_REG_7XX(reg, mode_offset, mode) \
+					.mux_reg = OMAP7XX_IO_CONF_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG_7XX(reg, bit, status)	.pull_reg = OMAP7XX_IO_CONF_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
+#endif /* CONFIG_OMAP_MUX_DEBUG */
+
+#define MUX_CFG(desc, mux_reg, mode_offset, mode,	\
+		pull_reg, pull_bit, pull_status,	\
+		pu_pd_reg, pu_pd_status, debug_status)	\
+{							\
+	.name =	 desc,					\
+	.debug = debug_status,				\
+	MUX_REG(mux_reg, mode_offset, mode)		\
+	PULL_REG(pull_reg, pull_bit, pull_status)	\
+	PU_PD_REG(pu_pd_reg, pu_pd_status)		\
+},
+
+
+/*
+ * OMAP730/850 has a slightly different config for the pin mux.
+ * - config regs are the OMAP7XX_IO_CONF_x regs (see omap7xx.h) regs and
+ *   not the FUNC_MUX_CTRL_x regs from hardware.h
+ * - for pull-up/down, only has one enable bit which is in the same register
+ *   as mux config
+ */
+#define MUX_CFG_7XX(desc, mux_reg, mode_offset, mode,	\
+		   pull_bit, pull_status, debug_status)\
+{							\
+	.name =	 desc,					\
+	.debug = debug_status,				\
+	MUX_REG_7XX(mux_reg, mode_offset, mode)		\
+	PULL_REG_7XX(mux_reg, pull_bit, pull_status)	\
+	PU_PD_REG(NA, 0)		\
+},
+
+struct pin_config {
+	char 			*name;
+	const unsigned int 	mux_reg;
+	unsigned char		debug;
+
+	const unsigned char mask_offset;
+	const unsigned char mask;
+
+	const char *pull_name;
+	const unsigned int pull_reg;
+	const unsigned char pull_val;
+	const unsigned char pull_bit;
+
+	const char *pu_pd_name;
+	const unsigned int pu_pd_reg;
+	const unsigned char pu_pd_val;
+
+#if	defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
+	const char *mux_reg_name;
+#endif
+
+};
+
+struct omap_mux_cfg {
+	struct pin_config	*pins;
+	unsigned long		size;
+	int			(*cfg_reg)(const struct pin_config *cfg);
+};
+
+#ifdef	CONFIG_OMAP_MUX
+/* setup pin muxing in Linux */
+extern int omap1_mux_init(void);
+extern int omap_mux_register(struct omap_mux_cfg *);
+#else
+/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
+static inline int omap1_mux_init(void) { return 0; }
+#endif
+
+extern int omap2_mux_init(void);
+
+#endif
diff --git a/arch/arm/mach-omap1/ocpi.c b/arch/arm/mach-omap1/ocpi.c
index 380ea2de58c1..d48f726571a4 100644
--- a/arch/arm/mach-omap1/ocpi.c
+++ b/arch/arm/mach-omap1/ocpi.c
@@ -20,9 +20,9 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/soc/ti/omap1-io.h>
 
-#include <mach/hardware.h>
-
+#include "hardware.h"
 #include "common.h"
 
 #define OCPI_BASE		0xfffec320
@@ -73,7 +73,7 @@ static int __init omap_ocpi_init(void)
 	if (IS_ERR(ocpi_ck))
 		return PTR_ERR(ocpi_ck);
 
-	clk_enable(ocpi_ck);
+	clk_prepare_enable(ocpi_ck);
 	ocpi_enable();
 	pr_info("OMAP OCPI interconnect driver loaded\n");
 
@@ -87,7 +87,7 @@ static void __exit omap_ocpi_exit(void)
 	if (!cpu_is_omap16xx())
 		return;
 
-	clk_disable(ocpi_ck);
+	clk_disable_unprepare(ocpi_ck);
 	clk_put(ocpi_ck);
 }
 
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/mach-omap1/omap-dma.c
index 9f11de46aaa9..f7e62de427f3 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/mach-omap1/omap-dma.c
@@ -34,9 +34,10 @@
 
 #include <linux/omap-dma.h>
 
-#ifdef CONFIG_ARCH_OMAP1
-#include <mach/soc.h>
-#endif
+#include <linux/soc/ti/omap1-io.h>
+#include <linux/soc/ti/omap1-soc.h>
+
+#include "tc.h"
 
 /*
  * MAX_LOGICAL_DMA_CH_COUNT: the maximum number of logical DMA
@@ -49,22 +50,12 @@
 
 #undef DEBUG
 
-#ifndef CONFIG_ARCH_OMAP1
-enum { DMA_CH_ALLOC_DONE, DMA_CH_PARAMS_SET_DONE, DMA_CH_STARTED,
-	DMA_CH_QUEUED, DMA_CH_NOTSTARTED, DMA_CH_PAUSED, DMA_CH_LINK_ENABLED
-};
-
-enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED };
-#endif
-
 #define OMAP_DMA_ACTIVE			0x01
-#define OMAP2_DMA_CSR_CLEAR_MASK	0xffffffff
 
 #define OMAP_FUNC_MUX_ARM_BASE		(0xfffe1000 + 0xec)
 
 static struct omap_system_dma_plat_info *p;
 static struct omap_dma_dev_attr *d;
-static void omap_clear_dma(int lch);
 static int enable_1510_mode;
 static u32 errata;
 
@@ -88,21 +79,14 @@ static int omap_dma_reserve_channels;
 static DEFINE_SPINLOCK(dma_chan_lock);
 static struct omap_dma_lch *dma_chan;
 
-static inline void disable_lnk(int lch);
-static void omap_disable_channel_irq(int lch);
-static inline void omap_enable_channel_irq(int lch);
-
-#ifdef CONFIG_ARCH_OMAP15XX
-/* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */
-static int omap_dma_in_1510_mode(void)
+static inline void omap_disable_channel_irq(int lch)
 {
-	return enable_1510_mode;
+	/* disable channel interrupts */
+	p->dma_write(0, CICR, lch);
+	/* Clear CSR */
+	p->dma_read(CSR, lch);
 }
-#else
-#define omap_dma_in_1510_mode()		0
-#endif
 
-#ifdef CONFIG_ARCH_OMAP1
 static inline void set_gdma_dev(int req, int dev)
 {
 	u32 reg = OMAP_FUNC_MUX_ARM_BASE + ((req - 1) / 5) * 4;
@@ -114,13 +98,8 @@ static inline void set_gdma_dev(int req, int dev)
 	l |= (dev - 1) << shift;
 	omap_writel(l, reg);
 }
-#else
-#define set_gdma_dev(req, dev)	do {} while (0)
-#define omap_readl(reg)		0
-#define omap_writel(val, reg)	do {} while (0)
-#endif
 
-#ifdef CONFIG_ARCH_OMAP1
+#if IS_ENABLED(CONFIG_FB_OMAP)
 void omap_set_dma_priority(int lch, int dst_port, int priority)
 {
 	unsigned long reg;
@@ -150,81 +129,43 @@ void omap_set_dma_priority(int lch, int dst_port, int priority)
 		omap_writel(l, reg);
 	}
 }
+EXPORT_SYMBOL(omap_set_dma_priority);
 #endif
 
-#ifdef CONFIG_ARCH_OMAP2PLUS
-void omap_set_dma_priority(int lch, int dst_port, int priority)
+#if IS_ENABLED(CONFIG_USB_OMAP)
+#ifdef CONFIG_ARCH_OMAP15XX
+/* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */
+static int omap_dma_in_1510_mode(void)
 {
-	u32 ccr;
-
-	ccr = p->dma_read(CCR, lch);
-	if (priority)
-		ccr |= (1 << 6);
-	else
-		ccr &= ~(1 << 6);
-	p->dma_write(ccr, CCR, lch);
+	return enable_1510_mode;
 }
+#else
+#define omap_dma_in_1510_mode()		0
 #endif
-EXPORT_SYMBOL(omap_set_dma_priority);
 
 void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
 				  int frame_count, int sync_mode,
 				  int dma_trigger, int src_or_dst_synch)
 {
 	u32 l;
+	u16 ccr;
 
 	l = p->dma_read(CSDP, lch);
 	l &= ~0x03;
 	l |= data_type;
 	p->dma_write(l, CSDP, lch);
 
-	if (dma_omap1()) {
-		u16 ccr;
-
-		ccr = p->dma_read(CCR, lch);
-		ccr &= ~(1 << 5);
-		if (sync_mode == OMAP_DMA_SYNC_FRAME)
-			ccr |= 1 << 5;
-		p->dma_write(ccr, CCR, lch);
-
-		ccr = p->dma_read(CCR2, lch);
-		ccr &= ~(1 << 2);
-		if (sync_mode == OMAP_DMA_SYNC_BLOCK)
-			ccr |= 1 << 2;
-		p->dma_write(ccr, CCR2, lch);
-	}
-
-	if (dma_omap2plus() && dma_trigger) {
-		u32 val;
-
-		val = p->dma_read(CCR, lch);
-
-		/* DMA_SYNCHRO_CONTROL_UPPER depends on the channel number */
-		val &= ~((1 << 23) | (3 << 19) | 0x1f);
-		val |= (dma_trigger & ~0x1f) << 14;
-		val |= dma_trigger & 0x1f;
-
-		if (sync_mode & OMAP_DMA_SYNC_FRAME)
-			val |= 1 << 5;
-		else
-			val &= ~(1 << 5);
-
-		if (sync_mode & OMAP_DMA_SYNC_BLOCK)
-			val |= 1 << 18;
-		else
-			val &= ~(1 << 18);
-
-		if (src_or_dst_synch == OMAP_DMA_DST_SYNC_PREFETCH) {
-			val &= ~(1 << 24);	/* dest synch */
-			val |= (1 << 23);	/* Prefetch */
-		} else if (src_or_dst_synch) {
-			val |= 1 << 24;		/* source synch */
-		} else {
-			val &= ~(1 << 24);	/* dest synch */
-		}
-		p->dma_write(val, CCR, lch);
-	}
+	ccr = p->dma_read(CCR, lch);
+	ccr &= ~(1 << 5);
+	if (sync_mode == OMAP_DMA_SYNC_FRAME)
+		ccr |= 1 << 5;
+	p->dma_write(ccr, CCR, lch);
 
+	ccr = p->dma_read(CCR2, lch);
+	ccr &= ~(1 << 2);
+	if (sync_mode == OMAP_DMA_SYNC_BLOCK)
+		ccr |= 1 << 2;
+	p->dma_write(ccr, CCR2, lch);
 	p->dma_write(elem_count, CEN, lch);
 	p->dma_write(frame_count, CFN, lch);
 }
@@ -232,7 +173,7 @@ EXPORT_SYMBOL(omap_set_dma_transfer_params);
 
 void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode)
 {
-	if (dma_omap1() && !dma_omap15xx()) {
+	if (!dma_omap15xx()) {
 		u32 l;
 
 		l = p->dma_read(LCH_CTRL, lch);
@@ -249,15 +190,12 @@ void omap_set_dma_src_params(int lch, int src_port, int src_amode,
 			     int src_ei, int src_fi)
 {
 	u32 l;
+	u16 w;
 
-	if (dma_omap1()) {
-		u16 w;
-
-		w = p->dma_read(CSDP, lch);
-		w &= ~(0x1f << 2);
-		w |= src_port << 2;
-		p->dma_write(w, CSDP, lch);
-	}
+	w = p->dma_read(CSDP, lch);
+	w &= ~(0x1f << 2);
+	w |= src_port << 2;
+	p->dma_write(w, CSDP, lch);
 
 	l = p->dma_read(CCR, lch);
 	l &= ~(0x03 << 12);
@@ -295,26 +233,15 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
 	case OMAP_DMA_DATA_BURST_DIS:
 		break;
 	case OMAP_DMA_DATA_BURST_4:
-		if (dma_omap2plus())
-			burst = 0x1;
-		else
-			burst = 0x2;
+		burst = 0x2;
 		break;
 	case OMAP_DMA_DATA_BURST_8:
-		if (dma_omap2plus()) {
-			burst = 0x2;
-			break;
-		}
 		/*
 		 * not supported by current hardware on OMAP1
 		 * w |= (0x03 << 7);
 		 */
 		fallthrough;
 	case OMAP_DMA_DATA_BURST_16:
-		if (dma_omap2plus()) {
-			burst = 0x3;
-			break;
-		}
 		/* OMAP1 don't support burst 16 */
 		fallthrough;
 	default:
@@ -333,12 +260,10 @@ void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
 {
 	u32 l;
 
-	if (dma_omap1()) {
-		l = p->dma_read(CSDP, lch);
-		l &= ~(0x1f << 9);
-		l |= dest_port << 9;
-		p->dma_write(l, CSDP, lch);
-	}
+	l = p->dma_read(CSDP, lch);
+	l &= ~(0x1f << 9);
+	l |= dest_port << 9;
+	p->dma_write(l, CSDP, lch);
 
 	l = p->dma_read(CCR, lch);
 	l &= ~(0x03 << 14);
@@ -376,22 +301,12 @@ void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
 	case OMAP_DMA_DATA_BURST_DIS:
 		break;
 	case OMAP_DMA_DATA_BURST_4:
-		if (dma_omap2plus())
-			burst = 0x1;
-		else
-			burst = 0x2;
+		burst = 0x2;
 		break;
 	case OMAP_DMA_DATA_BURST_8:
-		if (dma_omap2plus())
-			burst = 0x2;
-		else
-			burst = 0x3;
+		burst = 0x3;
 		break;
 	case OMAP_DMA_DATA_BURST_16:
-		if (dma_omap2plus()) {
-			burst = 0x3;
-			break;
-		}
 		/* OMAP1 don't support burst 16 */
 		fallthrough;
 	default:
@@ -407,26 +322,12 @@ EXPORT_SYMBOL(omap_set_dma_dest_burst_mode);
 static inline void omap_enable_channel_irq(int lch)
 {
 	/* Clear CSR */
-	if (dma_omap1())
-		p->dma_read(CSR, lch);
-	else
-		p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
+	p->dma_read(CSR, lch);
 
 	/* Enable some nice interrupts. */
 	p->dma_write(dma_chan[lch].enabled_irqs, CICR, lch);
 }
 
-static inline void omap_disable_channel_irq(int lch)
-{
-	/* disable channel interrupts */
-	p->dma_write(0, CICR, lch);
-	/* Clear CSR */
-	if (dma_omap1())
-		p->dma_read(CSR, lch);
-	else
-		p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
-}
-
 void omap_disable_dma_irq(int lch, u16 bits)
 {
 	dma_chan[lch].enabled_irqs &= ~bits;
@@ -439,8 +340,7 @@ static inline void enable_lnk(int lch)
 
 	l = p->dma_read(CLNK_CTRL, lch);
 
-	if (dma_omap1())
-		l &= ~(1 << 14);
+	l &= ~(1 << 14);
 
 	/* Set the ENABLE_LNK bits */
 	if (dma_chan[lch].next_lch != -1)
@@ -458,19 +358,13 @@ static inline void disable_lnk(int lch)
 	/* Disable interrupts */
 	omap_disable_channel_irq(lch);
 
-	if (dma_omap1()) {
-		/* Set the STOP_LNK bit */
-		l |= 1 << 14;
-	}
-
-	if (dma_omap2plus()) {
-		/* Clear the ENABLE_LNK bit */
-		l &= ~(1 << 15);
-	}
+	/* Set the STOP_LNK bit */
+	l |= 1 << 14;
 
 	p->dma_write(l, CLNK_CTRL, lch);
 	dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
 }
+#endif
 
 int omap_request_dma(int dev_id, const char *dev_name,
 		     void (*callback)(int lch, u16 ch_status, void *data),
@@ -509,8 +403,7 @@ int omap_request_dma(int dev_id, const char *dev_name,
 
 	chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
 
-	if (dma_omap1())
-		chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ;
+	chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ;
 
 	if (dma_omap16xx()) {
 		/* If the sync device is set, configure it dynamically. */
@@ -523,7 +416,7 @@ int omap_request_dma(int dev_id, const char *dev_name,
 		 * id.
 		 */
 		p->dma_write(dev_id | (1 << 10), CCR, free_ch);
-	} else if (dma_omap1()) {
+	} else {
 		p->dma_write(dev_id, CCR, free_ch);
 	}
 
@@ -570,6 +463,7 @@ static void omap_clear_dma(int lch)
 	local_irq_restore(flags);
 }
 
+#if IS_ENABLED(CONFIG_USB_OMAP)
 void omap_start_dma(int lch)
 {
 	u32 l;
@@ -739,8 +633,7 @@ dma_addr_t omap_get_dma_src_pos(int lch)
 			offset = p->dma_read(CSSA, lch);
 	}
 
-	if (dma_omap1())
-		offset |= (p->dma_read(CSSA, lch) & 0xFFFF0000);
+	offset |= (p->dma_read(CSSA, lch) & 0xFFFF0000);
 
 	return offset;
 }
@@ -778,8 +671,7 @@ dma_addr_t omap_get_dma_dst_pos(int lch)
 			offset = p->dma_read(CDSA, lch);
 	}
 
-	if (dma_omap1())
-		offset |= (p->dma_read(CDSA, lch) & 0xFFFF0000);
+	offset |= (p->dma_read(CDSA, lch) & 0xFFFF0000);
 
 	return offset;
 }
@@ -790,14 +682,14 @@ int omap_get_dma_active_status(int lch)
 	return (p->dma_read(CCR, lch) & OMAP_DMA_CCR_EN) != 0;
 }
 EXPORT_SYMBOL(omap_get_dma_active_status);
+#endif
 
 int omap_dma_running(void)
 {
 	int lch;
 
-	if (dma_omap1())
-		if (omap_lcd_dma_running())
-			return 1;
+	if (omap_lcd_dma_running())
+		return 1;
 
 	for (lch = 0; lch < dma_chan_count; lch++)
 		if (p->dma_read(CCR, lch) & OMAP_DMA_CCR_EN)
@@ -808,8 +700,6 @@ int omap_dma_running(void)
 
 /*----------------------------------------------------------------------------*/
 
-#ifdef CONFIG_ARCH_OMAP1
-
 static int omap1_dma_handle_ch(int ch)
 {
 	u32 csr;
@@ -862,10 +752,6 @@ static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id)
 	return handled ? IRQ_HANDLED : IRQ_NONE;
 }
 
-#else
-#define omap1_dma_irq_handler	NULL
-#endif
-
 struct omap_system_dma_plat_info *omap_get_plat_info(void)
 {
 	return p;
@@ -911,29 +797,27 @@ static int omap_system_dma_probe(struct platform_device *pdev)
 		if (ch >= 6 && enable_1510_mode)
 			continue;
 
-		if (dma_omap1()) {
-			/*
-			 * request_irq() doesn't like dev_id (ie. ch) being
-			 * zero, so we have to kludge around this.
-			 */
-			sprintf(&irq_name[0], "%d", ch);
-			dma_irq = platform_get_irq_byname(pdev, irq_name);
-
-			if (dma_irq < 0) {
-				ret = dma_irq;
-				goto exit_dma_irq_fail;
-			}
-
-			/* INT_DMA_LCD is handled in lcd_dma.c */
-			if (dma_irq == INT_DMA_LCD)
-				continue;
-
-			ret = request_irq(dma_irq,
-					omap1_dma_irq_handler, 0, "DMA",
-					(void *) (ch + 1));
-			if (ret != 0)
-				goto exit_dma_irq_fail;
+		/*
+		 * request_irq() doesn't like dev_id (ie. ch) being
+		 * zero, so we have to kludge around this.
+		 */
+		sprintf(&irq_name[0], "%d", ch);
+		dma_irq = platform_get_irq_byname(pdev, irq_name);
+
+		if (dma_irq < 0) {
+			ret = dma_irq;
+			goto exit_dma_irq_fail;
 		}
+
+		/* INT_DMA_LCD is handled in lcd_dma.c */
+		if (dma_irq == INT_DMA_LCD)
+			continue;
+
+		ret = request_irq(dma_irq,
+				omap1_dma_irq_handler, 0, "DMA",
+				(void *) (ch + 1));
+		if (ret != 0)
+			goto exit_dma_irq_fail;
 	}
 
 	/* reserve dma channels 0 and 1 in high security devices on 34xx */
@@ -953,9 +837,6 @@ static int omap_system_dma_remove(struct platform_device *pdev)
 {
 	int dma_irq, irq_rel = 0;
 
-	if (dma_omap2plus())
-		return 0;
-
 	for ( ; irq_rel < dma_chan_count; irq_rel++) {
 		dma_irq = platform_get_irq(pdev, irq_rel);
 		free_irq(dma_irq, (void *)(irq_rel + 1));
diff --git a/arch/arm/mach-omap1/include/mach/omap1510.h b/arch/arm/mach-omap1/omap1510.h
index 3d235244bf5c..3d235244bf5c 100644
--- a/arch/arm/mach-omap1/include/mach/omap1510.h
+++ b/arch/arm/mach-omap1/omap1510.h
diff --git a/arch/arm/mach-omap1/include/mach/omap16xx.h b/arch/arm/mach-omap1/omap16xx.h
index cd1c724869c7..cd1c724869c7 100644
--- a/arch/arm/mach-omap1/include/mach/omap16xx.h
+++ b/arch/arm/mach-omap1/omap16xx.h
diff --git a/arch/arm/mach-omap1/include/mach/omap7xx.h b/arch/arm/mach-omap1/omap7xx.h
index 63da994bc609..63da994bc609 100644
--- a/arch/arm/mach-omap1/include/mach/omap7xx.h
+++ b/arch/arm/mach-omap1/omap7xx.h
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index a745d64d4699..fce7d2b572bf 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -52,13 +52,14 @@
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
 
-#include <mach/tc.h>
-#include <mach/mux.h>
+#include <linux/soc/ti/omap1-io.h>
+#include "tc.h"
 #include <linux/omap-dma.h>
 #include <clocksource/timer-ti-dm.h>
 
-#include <mach/irqs.h>
-
+#include "hardware.h"
+#include "mux.h"
+#include "irqs.h"
 #include "iomap.h"
 #include "clock.h"
 #include "pm.h"
diff --git a/arch/arm/mach-omap1/pm.h b/arch/arm/mach-omap1/pm.h
index cd926dcb5e7f..d9165709c532 100644
--- a/arch/arm/mach-omap1/pm.h
+++ b/arch/arm/mach-omap1/pm.h
@@ -34,6 +34,8 @@
 #ifndef __ARCH_ARM_MACH_OMAP1_PM_H
 #define __ARCH_ARM_MACH_OMAP1_PM_H
 
+#include <linux/soc/ti/omap1-io.h>
+
 /*
  * ----------------------------------------------------------------------------
  * Register and offset definitions to be used in PM assembler code
diff --git a/arch/arm/mach-omap1/pm_bus.c b/arch/arm/mach-omap1/pm_bus.c
index 667c1637ff91..c04619ac0631 100644
--- a/arch/arm/mach-omap1/pm_bus.c
+++ b/arch/arm/mach-omap1/pm_bus.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Runtime PM support code for OMAP1
  *
  * Author: Kevin Hilman, Deep Root Systems, LLC
  *
  * Copyright (C) 2010 Texas Instruments, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
@@ -43,4 +40,3 @@ static int __init omap1_pm_runtime_init(void)
 	return 0;
 }
 core_initcall(omap1_pm_runtime_init);
-
diff --git a/arch/arm/mach-omap1/reset.c b/arch/arm/mach-omap1/reset.c
index af2c120b0c4e..2eee6a6965ff 100644
--- a/arch/arm/mach-omap1/reset.c
+++ b/arch/arm/mach-omap1/reset.c
@@ -6,8 +6,7 @@
 #include <linux/io.h>
 #include <linux/reboot.h>
 
-#include <mach/hardware.h>
-
+#include "hardware.h"
 #include "iomap.h"
 #include "common.h"
 
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 9eb591fbfd89..88928fc33b2e 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -19,8 +19,8 @@
 
 #include <asm/mach-types.h>
 
-#include <mach/mux.h>
-
+#include "serial.h"
+#include "mux.h"
 #include "pm.h"
 #include "soc.h"
 
@@ -141,7 +141,7 @@ void __init omap_serial_init(void)
 			if (IS_ERR(uart1_ck))
 				printk("Could not get uart1_ck\n");
 			else {
-				clk_enable(uart1_ck);
+				clk_prepare_enable(uart1_ck);
 				if (cpu_is_omap15xx())
 					clk_set_rate(uart1_ck, 12000000);
 			}
@@ -151,7 +151,7 @@ void __init omap_serial_init(void)
 			if (IS_ERR(uart2_ck))
 				printk("Could not get uart2_ck\n");
 			else {
-				clk_enable(uart2_ck);
+				clk_prepare_enable(uart2_ck);
 				if (cpu_is_omap15xx())
 					clk_set_rate(uart2_ck, 12000000);
 				else
@@ -163,7 +163,7 @@ void __init omap_serial_init(void)
 			if (IS_ERR(uart3_ck))
 				printk("Could not get uart3_ck\n");
 			else {
-				clk_enable(uart3_ck);
+				clk_prepare_enable(uart3_ck);
 				if (cpu_is_omap15xx())
 					clk_set_rate(uart3_ck, 12000000);
 			}
diff --git a/arch/arm/mach-omap1/include/mach/serial.h b/arch/arm/mach-omap1/serial.h
index 4700e384c3d9..4700e384c3d9 100644
--- a/arch/arm/mach-omap1/include/mach/serial.h
+++ b/arch/arm/mach-omap1/serial.h
diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S
index a908c51839a4..f111b79512ce 100644
--- a/arch/arm/mach-omap1/sleep.S
+++ b/arch/arm/mach-omap1/sleep.S
@@ -36,7 +36,7 @@
 
 #include <asm/assembler.h>
 
-#include <mach/hardware.h>
+#include "hardware.h"
 
 #include "iomap.h"
 #include "pm.h"
diff --git a/arch/arm/mach-omap1/soc.h b/arch/arm/mach-omap1/soc.h
index 69daf0187b1d..5fb57fdd9c2b 100644
--- a/arch/arm/mach-omap1/soc.h
+++ b/arch/arm/mach-omap1/soc.h
@@ -1,4 +1,6 @@
 /*
- * We can move mach/soc.h here once the drivers are fixed
+ * We can move linux/soc/ti/omap1-soc.h here once the drivers are fixed
  */
-#include <mach/soc.h>
+#include "hardware.h"
+#include "irqs.h"
+#include <asm/irq.h>
diff --git a/arch/arm/mach-omap1/sram-init.c b/arch/arm/mach-omap1/sram-init.c
index 3bd60708c345..27c42e2a21cc 100644
--- a/arch/arm/mach-omap1/sram-init.c
+++ b/arch/arm/mach-omap1/sram-init.c
@@ -14,6 +14,7 @@
 #include <asm/fncpy.h>
 #include <asm/tlb.h>
 #include <asm/cacheflush.h>
+#include <asm/set_memory.h>
 
 #include <asm/mach/map.h>
 
@@ -22,18 +23,77 @@
 
 #define OMAP1_SRAM_PA		0x20000000
 #define SRAM_BOOTLOADER_SZ	0x80
+#define ROUND_DOWN(value,boundary)	((value) & (~((boundary)-1)))
+
+static void __iomem *omap_sram_base;
+static unsigned long omap_sram_start;
+static unsigned long omap_sram_skip;
+static unsigned long omap_sram_size;
+static void __iomem *omap_sram_ceil;
+
+/*
+ * Memory allocator for SRAM: calculates the new ceiling address
+ * for pushing a function using the fncpy API.
+ *
+ * Note that fncpy requires the returned address to be aligned
+ * to an 8-byte boundary.
+ */
+static void *omap_sram_push_address(unsigned long size)
+{
+	unsigned long available, new_ceil = (unsigned long)omap_sram_ceil;
+
+	available = omap_sram_ceil - (omap_sram_base + omap_sram_skip);
+
+	if (size > available) {
+		pr_err("Not enough space in SRAM\n");
+		return NULL;
+	}
+
+	new_ceil -= size;
+	new_ceil = ROUND_DOWN(new_ceil, FNCPY_ALIGN);
+	omap_sram_ceil = IOMEM(new_ceil);
+
+	return (void __force *)omap_sram_ceil;
+}
+
+void *omap_sram_push(void *funcp, unsigned long size)
+{
+	void *sram;
+	unsigned long base;
+	int pages;
+	void *dst = NULL;
+
+	sram = omap_sram_push_address(size);
+	if (!sram)
+		return NULL;
+
+	base = (unsigned long)sram & PAGE_MASK;
+	pages = PAGE_ALIGN(size) / PAGE_SIZE;
+
+	set_memory_rw(base, pages);
+
+	dst = fncpy(sram, funcp, size);
+
+	set_memory_ro(base, pages);
+	set_memory_x(base, pages);
+
+	return dst;
+}
 
 /*
  * The amount of SRAM depends on the core type.
  * Note that we cannot try to test for SRAM here because writes
  * to secure SRAM will hang the system. Also the SRAM is not
  * yet mapped at this point.
+ * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early.
  */
 static void __init omap_detect_and_map_sram(void)
 {
-	unsigned long omap_sram_skip = SRAM_BOOTLOADER_SZ;
-	unsigned long omap_sram_start = OMAP1_SRAM_PA;
-	unsigned long omap_sram_size;
+	unsigned long base;
+	int pages;
+
+	omap_sram_skip = SRAM_BOOTLOADER_SZ;
+	omap_sram_start = OMAP1_SRAM_PA;
 
 	if (cpu_is_omap7xx())
 		omap_sram_size = 0x32000;	/* 200K */
@@ -47,8 +107,27 @@ static void __init omap_detect_and_map_sram(void)
 		omap_sram_size = 0x4000;
 	}
 
-	omap_map_sram(omap_sram_start, omap_sram_size,
-		omap_sram_skip, 1);
+	omap_sram_start = ROUND_DOWN(omap_sram_start, PAGE_SIZE);
+	omap_sram_base = __arm_ioremap_exec(omap_sram_start, omap_sram_size, 1);
+	if (!omap_sram_base) {
+		pr_err("SRAM: Could not map\n");
+		return;
+	}
+
+	omap_sram_ceil = omap_sram_base + omap_sram_size;
+
+	/*
+	 * Looks like we need to preserve some bootloader code at the
+	 * beginning of SRAM for jumping to flash for reboot to work...
+	 */
+	memset_io(omap_sram_base + omap_sram_skip, 0,
+		  omap_sram_size - omap_sram_skip);
+
+	base = (unsigned long)omap_sram_base;
+	pages = PAGE_ALIGN(omap_sram_size) / PAGE_SIZE;
+
+	set_memory_ro(base, pages);
+	set_memory_x(base, pages);
 }
 
 static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl);
@@ -62,7 +141,7 @@ void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
 	_omap_sram_reprogram_clock(dpllctl, ckctl);
 }
 
-int __init omap_sram_init(void)
+int __init omap1_sram_init(void)
 {
 	omap_detect_and_map_sram();
 	_omap_sram_reprogram_clock =
diff --git a/arch/arm/mach-omap1/sram.S b/arch/arm/mach-omap1/sram.S
index 37f34fcd65fb..89f4dc1b70f0 100644
--- a/arch/arm/mach-omap1/sram.S
+++ b/arch/arm/mach-omap1/sram.S
@@ -6,11 +6,11 @@
  */
 
 #include <linux/linkage.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #include <asm/assembler.h>
 
-#include <mach/hardware.h>
-
+#include "hardware.h"
 #include "iomap.h"
 
 	.text
diff --git a/arch/arm/mach-omap1/sram.h b/arch/arm/mach-omap1/sram.h
index 73efabd119e8..f45e6dd6d7e5 100644
--- a/arch/arm/mach-omap1/sram.h
+++ b/arch/arm/mach-omap1/sram.h
@@ -1,8 +1,10 @@
 /* SPDX-License-Identifier: GPL-2.0 */
-#include <plat/sram.h>
 
 extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
 
+int omap1_sram_init(void);
+void *omap_sram_push(void *funcp, unsigned long size);
+
 /* Do not use these */
 extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
 extern unsigned long omap1_sram_reprogram_clock_sz;
diff --git a/arch/arm/mach-omap1/include/mach/tc.h b/arch/arm/mach-omap1/tc.h
index adaab6a0bd08..243454bc0684 100644
--- a/arch/arm/mach-omap1/include/mach/tc.h
+++ b/arch/arm/mach-omap1/tc.h
@@ -1,7 +1,5 @@
 /* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
- * arch/arm/plat-omap/include/mach/tc.h
- *
  * OMAP Traffic Controller
  *
  * Copyright (C) 2004 Nokia Corporation
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index de590a85a42b..d5e127851dc7 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -47,12 +47,14 @@
 
 #include <asm/irq.h>
 
-#include <mach/hardware.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
+#include "hardware.h"
+#include "mux.h"
 #include "iomap.h"
 #include "common.h"
+#include "clock.h"
 
 #ifdef CONFIG_OMAP_MPU_TIMER
 
@@ -224,6 +226,9 @@ static inline void omap_mpu_timer_init(void)
  */
 void __init omap1_timer_init(void)
 {
+	omap1_clk_init();
+	omap1_mux_init();
+
 	if (omap_32k_timer_init() != 0)
 		omap_mpu_timer_init();
 }
diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c
index 0411d5508d63..f5cd4bbf7566 100644
--- a/arch/arm/mach-omap1/timer.c
+++ b/arch/arm/mach-omap1/timer.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * OMAP1 Dual-Mode Timers - platform device registration
  *
@@ -9,15 +10,6 @@
  * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
  * Tarun Kanti DebBarma <tarun.kanti@ti.com>
  * Thara Gopinath <thara@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/clk.h>
@@ -26,6 +18,7 @@
 #include <linux/slab.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/dmtimer-omap.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #include <clocksource/timer-ti-dm.h>
 
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index 780fdf03c3ce..410d17d1d443 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -45,15 +45,13 @@
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 #include <linux/io.h>
+#include <linux/sched_clock.h>
 
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
-#include <plat/counter-32k.h>
-
-#include <mach/hardware.h>
-
+#include "hardware.h"
 #include "common.h"
 
 /*
@@ -159,6 +157,98 @@ static __init void omap_init_32k_timer(void)
 					OMAP_32K_TICKS_PER_SEC, 1, 0xfffffffe);
 }
 
+/* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */
+#define OMAP2_32KSYNCNT_REV_OFF		0x0
+#define OMAP2_32KSYNCNT_REV_SCHEME	(0x3 << 30)
+#define OMAP2_32KSYNCNT_CR_OFF_LOW	0x10
+#define OMAP2_32KSYNCNT_CR_OFF_HIGH	0x30
+
+/*
+ * 32KHz clocksource ... always available, on pretty most chips except
+ * OMAP 730 and 1510.  Other timers could be used as clocksources, with
+ * higher resolution in free-running counter modes (e.g. 12 MHz xtal),
+ * but systems won't necessarily want to spend resources that way.
+ */
+static void __iomem *sync32k_cnt_reg;
+
+static u64 notrace omap_32k_read_sched_clock(void)
+{
+	return sync32k_cnt_reg ? readl_relaxed(sync32k_cnt_reg) : 0;
+}
+
+/**
+ * omap_read_persistent_clock64 -  Return time from a persistent clock.
+ *
+ * Reads the time from a source which isn't disabled during PM, the
+ * 32k sync timer.  Convert the cycles elapsed since last read into
+ * nsecs and adds to a monotonically increasing timespec64.
+ */
+static struct timespec64 persistent_ts;
+static cycles_t cycles;
+static unsigned int persistent_mult, persistent_shift;
+
+static void omap_read_persistent_clock64(struct timespec64 *ts)
+{
+	unsigned long long nsecs;
+	cycles_t last_cycles;
+
+	last_cycles = cycles;
+	cycles = sync32k_cnt_reg ? readl_relaxed(sync32k_cnt_reg) : 0;
+
+	nsecs = clocksource_cyc2ns(cycles - last_cycles,
+					persistent_mult, persistent_shift);
+
+	timespec64_add_ns(&persistent_ts, nsecs);
+
+	*ts = persistent_ts;
+}
+
+/**
+ * omap_init_clocksource_32k - setup and register counter 32k as a
+ * kernel clocksource
+ * @pbase: base addr of counter_32k module
+ * @size: size of counter_32k to map
+ *
+ * Returns 0 upon success or negative error code upon failure.
+ *
+ */
+static int __init omap_init_clocksource_32k(void __iomem *vbase)
+{
+	int ret;
+
+	/*
+	 * 32k sync Counter IP register offsets vary between the
+	 * highlander version and the legacy ones.
+	 * The 'SCHEME' bits(30-31) of the revision register is used
+	 * to identify the version.
+	 */
+	if (readl_relaxed(vbase + OMAP2_32KSYNCNT_REV_OFF) &
+						OMAP2_32KSYNCNT_REV_SCHEME)
+		sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF_HIGH;
+	else
+		sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF_LOW;
+
+	/*
+	 * 120000 rough estimate from the calculations in
+	 * __clocksource_update_freq_scale.
+	 */
+	clocks_calc_mult_shift(&persistent_mult, &persistent_shift,
+			32768, NSEC_PER_SEC, 120000);
+
+	ret = clocksource_mmio_init(sync32k_cnt_reg, "32k_counter", 32768,
+				250, 32, clocksource_mmio_readl_up);
+	if (ret) {
+		pr_err("32k_counter: can't register clocksource\n");
+		return ret;
+	}
+
+	sched_clock_register(omap_32k_read_sched_clock, 32, 32768);
+	register_persistent_clock(omap_read_persistent_clock64);
+	pr_info("OMAP clocksource: 32k_counter at 32768 Hz\n");
+
+	return 0;
+}
+
 /*
  * ---------------------------------------------------------------------------
  * Timer initialization
@@ -180,7 +270,7 @@ int __init omap_32k_timer_init(void)
 
 		sync32k_ick = clk_get(NULL, "omap_32ksync_ick");
 		if (!IS_ERR(sync32k_ick))
-			clk_enable(sync32k_ick);
+			clk_prepare_enable(sync32k_ick);
 
 		ret = omap_init_clocksource_32k(base);
 	}
diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c
index e60831c82b78..0119f3ddb7a6 100644
--- a/arch/arm/mach-omap1/usb.c
+++ b/arch/arm/mach-omap1/usb.c
@@ -12,13 +12,13 @@
 #include <linux/dma-map-ops.h>
 #include <linux/io.h>
 #include <linux/delay.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #include <asm/irq.h>
 
-#include <mach/mux.h>
-
-#include <mach/usb.h>
-
+#include "hardware.h"
+#include "mux.h"
+#include "usb.h"
 #include "common.h"
 
 /* These routines should handle the standard chip-specific modes
diff --git a/arch/arm/mach-omap1/usb.h b/arch/arm/mach-omap1/usb.h
new file mode 100644
index 000000000000..08c9344c46e3
--- /dev/null
+++ b/arch/arm/mach-omap1/usb.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * fixme correct answer depends on hmc_mode,
+ * as does (on omap1) any nonzero value for config->otg port number
+ */
+#include <linux/platform_data/usb-omap1.h>
+#include <linux/soc/ti/omap1-usb.h>
+
+#if IS_ENABLED(CONFIG_USB_OMAP)
+#define	is_usb0_device(config)	1
+#else
+#define	is_usb0_device(config)	0
+#endif
+
+#if IS_ENABLED(CONFIG_USB_SUPPORT)
+void omap1_usb_init(struct omap_usb_config *pdata);
+#else
+static inline void omap1_usb_init(struct omap_usb_config *pdata)
+{
+}
+#endif
+
+#define OMAP1_OHCI_BASE			0xfffba000
+#define OMAP2_OHCI_BASE			0x4805e000
+#define OMAP_OHCI_BASE			OMAP1_OHCI_BASE
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 02c253de9b6e..3b53dda9ec79 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -105,6 +105,7 @@ config ARCH_OMAP2PLUS
 	select MACH_OMAP_GENERIC
 	select MEMORY
 	select MFD_SYSCON
+	select OMAP_DM_SYSTIMER
 	select OMAP_DM_TIMER
 	select OMAP_GPMC
 	select PINCTRL
@@ -122,7 +123,9 @@ config ARCH_OMAP2PLUS
 config OMAP_INTERCONNECT_BARRIER
 	bool
 	select ARM_HEAVY_MB
-	
+
+config ARCH_OMAP
+	bool
 
 if ARCH_OMAP2PLUS
 
@@ -153,6 +156,53 @@ config SOC_HAS_REALTIME_COUNTER
 	depends on SOC_OMAP5 || SOC_DRA7XX
 	default y
 
+config POWER_AVS_OMAP
+	bool "AVS(Adaptive Voltage Scaling) support for OMAP IP versions 1&2"
+	depends on (ARCH_OMAP3 || ARCH_OMAP4) && PM
+	select POWER_SUPPLY
+	help
+	  Say Y to enable AVS(Adaptive Voltage Scaling)
+	  support on OMAP containing the version 1 or
+	  version 2 of the SmartReflex IP.
+	  V1 is the 65nm version used in OMAP3430.
+	  V2 is the update for the 45nm version of the IP used in OMAP3630
+	  and OMAP4430
+
+	  Please note, that by default SmartReflex is only
+	  initialized and not enabled. To enable the automatic voltage
+	  compensation for vdd mpu and vdd core from user space,
+	  user must write 1 to
+		/debug/smartreflex/sr_<X>/autocomp,
+	  where X is mpu_iva or core for OMAP3.
+	  Optionally autocompensation can be enabled in the kernel
+	  by default during system init via the enable_on_init flag
+	  which an be passed as platform data to the smartreflex driver.
+
+config POWER_AVS_OMAP_CLASS3
+	bool "Class 3 mode of Smartreflex Implementation"
+	depends on POWER_AVS_OMAP && TWL4030_CORE
+	help
+	  Say Y to enable Class 3 implementation of Smartreflex
+
+	  Class 3 implementation of Smartreflex employs continuous hardware
+	  voltage calibration.
+
+config OMAP3_L2_AUX_SECURE_SAVE_RESTORE
+	bool "OMAP3 HS/EMU save and restore for L2 AUX control register"
+	depends on ARCH_OMAP3 && PM
+	help
+	  Without this option, L2 Auxiliary control register contents are
+	  lost during off-mode entry on HS/EMU devices. This feature
+	  requires support from PPA / boot-loader in HS/EMU devices, which
+	  currently does not exist by default.
+
+config OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
+	int "Service ID for the support routine to set L2 AUX control"
+	depends on OMAP3_L2_AUX_SECURE_SAVE_RESTORE
+	default 43
+	help
+	  PPA routine service ID for setting L2 auxiliary control register.
+
 comment "OMAP Core Type"
 	depends on ARCH_OMAP2
 
@@ -160,6 +210,7 @@ config SOC_OMAP2420
 	bool "OMAP2420 support"
 	depends on ARCH_OMAP2
 	default y
+	select OMAP_DM_SYSTIMER
 	select OMAP_DM_TIMER
 	select SOC_HAS_OMAP2_SDRC
 
@@ -192,10 +243,10 @@ config MACH_OMAP2_TUSB6010
 	default y if MACH_NOKIA_N8X0
 
 config MACH_NOKIA_N810
-       bool
+	bool
 
 config MACH_NOKIA_N810_WIMAX
-       bool
+	bool
 
 config MACH_NOKIA_N8X0
 	bool "Nokia N800/N810"
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 8306ad686bc8..2feb9f6630af 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -3,9 +3,6 @@
 # Makefile for the linux kernel.
 #
 
-ccflags-y := -I$(srctree)/$(src)/include \
-	-I$(srctree)/arch/arm/plat-omap/include
-
 # Common support
 obj-y := id.o io.o control.o devices.o fb.o pm.o \
 	 common.o dma.o omap-headsmp.o sram.o
diff --git a/arch/arm/mach-omap2/am33xx.h b/arch/arm/mach-omap2/am33xx.h
index bf2b5f87e404..32bcfcf34817 100644
--- a/arch/arm/mach-omap2/am33xx.h
+++ b/arch/arm/mach-omap2/am33xx.h
@@ -1,16 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * This file contains the address info for various AM33XX modules.
  *
  * Copyright (C) 2011 Texas Instruments, Inc. - https://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #ifndef __ASM_ARCH_AM33XX_H
diff --git a/arch/arm/mach-omap2/clockdomains33xx_data.c b/arch/arm/mach-omap2/clockdomains33xx_data.c
index b4d5144df445..87f4e927eb18 100644
--- a/arch/arm/mach-omap2/clockdomains33xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains33xx_data.c
@@ -1,17 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * AM33XX Clock Domain data.
  *
  * Copyright (C) 2011-2012 Texas Instruments Incorporated - https://www.ti.com/
  * Vaibhav Hiremath <hvaibhav@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-omap2/clockdomains81xx_data.c b/arch/arm/mach-omap2/clockdomains81xx_data.c
index 127dc7ace71f..549cf61487a5 100644
--- a/arch/arm/mach-omap2/clockdomains81xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains81xx_data.c
@@ -1,17 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * TI81XX Clock Domain data.
  *
  * Copyright (C) 2010 Texas Instruments, Inc. - https://www.ti.com/
  * Copyright (C) 2013 SKTB SKiT, http://www.skitlab.ru/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #ifndef __ARCH_ARM_MACH_OMAP2_CLOCKDOMAINS_81XX_H
diff --git a/arch/arm/mach-omap2/cm-regbits-33xx.h b/arch/arm/mach-omap2/cm-regbits-33xx.h
index e7ae2bb515e3..1b97219aaba4 100644
--- a/arch/arm/mach-omap2/cm-regbits-33xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-33xx.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * AM33XX Power Management register bits
  *
@@ -5,15 +6,6 @@
  * Vaibhav Hiremath <hvaibhav@ti.com>
  *
  * Copyright (C) 2011-2012 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
  */
 
 
diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c
index ac4882ebdca3..d61fa06117b4 100644
--- a/arch/arm/mach-omap2/cm33xx.c
+++ b/arch/arm/mach-omap2/cm33xx.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * AM33XX CM functions
  *
@@ -5,15 +6,6 @@
  * Vaibhav Hiremath <hvaibhav@ti.com>
  *
  * Reference taken from from OMAP4 cminst44xx.c
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-omap2/cm33xx.h b/arch/arm/mach-omap2/cm33xx.h
index af63d1892c33..456267a7af71 100644
--- a/arch/arm/mach-omap2/cm33xx.h
+++ b/arch/arm/mach-omap2/cm33xx.h
@@ -1,17 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * AM33XX CM offset macros
  *
  * Copyright (C) 2011-2012 Texas Instruments Incorporated - https://www.ti.com/
  * Vaibhav Hiremath <hvaibhav@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
  */
 
 #ifndef __ARCH_ARM_MACH_OMAP2_CM_33XX_H
diff --git a/arch/arm/mach-omap2/cm81xx.h b/arch/arm/mach-omap2/cm81xx.h
index bd91223e838e..ffcde1812c6c 100644
--- a/arch/arm/mach-omap2/cm81xx.h
+++ b/arch/arm/mach-omap2/cm81xx.h
@@ -1,17 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Clock domain register offsets for TI81XX.
  *
  * Copyright (C) 2010 Texas Instruments, Inc. - https://www.ti.com/
  * Copyright (C) 2013 SKTB SKiT, http://www.skitlab.ru/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #ifndef __ARCH_ARM_MACH_OMAP2_CM_TI81XX_H
diff --git a/arch/arm/mach-omap2/cm_common.c b/arch/arm/mach-omap2/cm_common.c
index e2d069fe67f1..87f2c2d2d754 100644
--- a/arch/arm/mach-omap2/cm_common.c
+++ b/arch/arm/mach-omap2/cm_common.c
@@ -320,8 +320,10 @@ int __init omap2_cm_base_init(void)
 		data = (struct omap_prcm_init_data *)match->data;
 
 		ret = of_address_to_resource(np, 0, &res);
-		if (ret)
+		if (ret) {
+			of_node_put(np);
 			return ret;
+		}
 
 		if (data->index == TI_CLKM_CM)
 			mem = &cm_base;
@@ -367,8 +369,10 @@ int __init omap_cm_init(void)
 			continue;
 
 		ret = omap2_clk_provider_init(np, data->index, NULL, data->mem);
-		if (ret)
+		if (ret) {
+			of_node_put(np);
 			return ret;
+		}
 	}
 
 	return 0;
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index 32f58f58515e..bd5981945239 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -266,7 +266,7 @@ extern void omap4_sar_ram_init(void);
 extern void __iomem *omap4_get_sar_ram_base(void);
 extern void omap4_mpuss_early_init(void);
 extern void omap_do_wfi(void);
-
+extern void omap_interconnect_sync(void);
 
 #ifdef CONFIG_SMP
 /* Needed for secondary core boot */
@@ -360,5 +360,16 @@ extern int omap_dss_reset(struct omap_hwmod *);
 /* SoC specific clock initializer */
 int omap_clk_init(void);
 
+#if IS_ENABLED(CONFIG_OMAP_IOMMU)
+int omap_iommu_set_pwrdm_constraint(struct platform_device *pdev, bool request,
+				    u8 *pwrst);
+#else
+static inline int omap_iommu_set_pwrdm_constraint(struct platform_device *pdev,
+						  bool request, u8 *pwrst)
+{
+	return 0;
+}
+#endif
+
 #endif /* __ASSEMBLER__ */
 #endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 062d431fc33a..c514a9602269 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -769,8 +769,10 @@ int __init omap2_control_base_init(void)
 		data = (struct control_init_data *)match->data;
 
 		mem = of_iomap(np, 0);
-		if (!mem)
+		if (!mem) {
+			of_node_put(np);
 			return -ENOMEM;
+		}
 
 		if (data->index == TI_CLKM_CTRL) {
 			omap2_ctrl_base = mem;
@@ -810,22 +812,24 @@ int __init omap_control_init(void)
 		if (scm_conf) {
 			syscon = syscon_node_to_regmap(scm_conf);
 
-			if (IS_ERR(syscon))
-				return PTR_ERR(syscon);
+			if (IS_ERR(syscon)) {
+				ret = PTR_ERR(syscon);
+				goto of_node_put;
+			}
 
 			if (of_get_child_by_name(scm_conf, "clocks")) {
 				ret = omap2_clk_provider_init(scm_conf,
 							      data->index,
 							      syscon, NULL);
 				if (ret)
-					return ret;
+					goto of_node_put;
 			}
 		} else {
 			/* No scm_conf found, direct access */
 			ret = omap2_clk_provider_init(np, data->index, NULL,
 						      data->mem);
 			if (ret)
-				return ret;
+				goto of_node_put;
 		}
 	}
 
@@ -836,6 +840,11 @@ int __init omap_control_init(void)
 	}
 
 	return 0;
+
+of_node_put:
+	of_node_put(np);
+	return ret;
+
 }
 
 /**
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 6daaa645ae5d..dbec3bb9fbf4 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -1,18 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * OMAP2plus display device setup / initialization.
  *
  * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/
  *	Senthilvadivu Guruswamy
  *	Sumit Semwal
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/string.h>
@@ -211,6 +203,7 @@ static int __init omapdss_init_fbdev(void)
 	node = of_find_node_by_name(NULL, "omap4_padconf_global");
 	if (node)
 		omap4_dsi_mux_syscon = syscon_node_to_regmap(node);
+	of_node_put(node);
 
 	return 0;
 }
@@ -259,13 +252,15 @@ static int __init omapdss_init_of(void)
 
 	if (!pdev) {
 		pr_err("Unable to find DSS platform device\n");
+		of_node_put(node);
 		return -ENODEV;
 	}
 
 	r = of_platform_populate(node, NULL, NULL, &pdev->dev);
+	put_device(&pdev->dev);
+	of_node_put(node);
 	if (r) {
 		pr_err("Unable to populate DSS submodule devices\n");
-		put_device(&pdev->dev);
 		return r;
 	}
 
diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c
index dfc9b21ff19b..830cd4e7eb44 100644
--- a/arch/arm/mach-omap2/dma.c
+++ b/arch/arm/mach-omap2/dma.c
@@ -30,6 +30,7 @@
 #include <linux/omap-dma.h>
 
 #include "soc.h"
+#include "common.h"
 
 static const struct omap_dma_reg reg_map[] = {
 	[REVISION]	= { 0x0000, 0x00, OMAP_DMA_REG_32BIT },
diff --git a/arch/arm/mach-omap2/include/mach/hardware.h b/arch/arm/mach-omap2/include/mach/hardware.h
deleted file mode 100644
index 54492dbf6973..000000000000
--- a/arch/arm/mach-omap2/include/mach/hardware.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * arch/arm/mach-omap2/include/mach/hardware.h
- */
diff --git a/arch/arm/mach-omap2/include/mach/irqs.h b/arch/arm/mach-omap2/include/mach/irqs.h
deleted file mode 100644
index ba5282cafa42..000000000000
--- a/arch/arm/mach-omap2/include/mach/irqs.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * arch/arm/mach-omap2/include/mach/irqs.h
- */
diff --git a/arch/arm/mach-omap2/include/mach/serial.h b/arch/arm/mach-omap2/include/mach/serial.h
deleted file mode 100644
index 7ca1fcff453b..000000000000
--- a/arch/arm/mach-omap2/include/mach/serial.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/* OMAP2 serial ports */
-#define OMAP2_UART1_BASE	0x4806a000
-#define OMAP2_UART2_BASE	0x4806c000
-#define OMAP2_UART3_BASE	0x4806e000
-
-/* OMAP3 serial ports */
-#define OMAP3_UART1_BASE	OMAP2_UART1_BASE
-#define OMAP3_UART2_BASE	OMAP2_UART2_BASE
-#define OMAP3_UART3_BASE	0x49020000
-#define OMAP3_UART4_BASE	0x49042000	/* Only on 36xx */
-#define OMAP3_UART4_AM35XX_BASE	0x4809E000	/* Only on AM35xx */
-
-/* OMAP4 serial ports */
-#define OMAP4_UART1_BASE	OMAP2_UART1_BASE
-#define OMAP4_UART2_BASE	OMAP2_UART2_BASE
-#define OMAP4_UART3_BASE	0x48020000
-#define OMAP4_UART4_BASE	0x4806e000
-
-/* TI81XX serial ports */
-#define TI81XX_UART1_BASE	0x48020000
-#define TI81XX_UART2_BASE	0x48022000
-#define TI81XX_UART3_BASE	0x48024000
-
-/* AM3505/3517 UART4 */
-#define AM35XX_UART4_BASE	0x4809E000	/* Only on AM3505/3517 */
-
-/* AM33XX serial port */
-#define AM33XX_UART1_BASE	0x44E09000
-
-/* OMAP5 serial ports */
-#define OMAP5_UART1_BASE	OMAP2_UART1_BASE
-#define OMAP5_UART2_BASE	OMAP2_UART2_BASE
-#define OMAP5_UART3_BASE	OMAP4_UART3_BASE
-#define OMAP5_UART4_BASE	OMAP4_UART4_BASE
-#define OMAP5_UART5_BASE	0x48066000
-#define OMAP5_UART6_BASE	0x48068000
-
-/* External port on Zoom2/3 */
-#define ZOOM_UART_BASE		0x10000000
-#define ZOOM_UART_VIRT		0xfa400000
-
-#define OMAP_PORT_SHIFT		2
-#define ZOOM_PORT_SHIFT		1
-
-#define OMAP24XX_BASE_BAUD	(48000000/16)
-
-#ifndef __ASSEMBLER__
-
-struct omap_board_data;
-struct omap_uart_port_info;
-
-extern void omap_serial_init(void);
-extern void omap_serial_board_init(struct omap_uart_port_info *platform_data);
-extern void omap_serial_init_port(struct omap_board_data *bdata,
-		struct omap_uart_port_info *platform_data);
-#endif
diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c
index 93c20bbd7b7e..9c8a85198e16 100644
--- a/arch/arm/mach-omap2/omap-iommu.c
+++ b/arch/arm/mach-omap2/omap-iommu.c
@@ -13,6 +13,7 @@
 
 #include "clockdomain.h"
 #include "powerdomain.h"
+#include "common.h"
 
 struct pwrdm_link {
 	struct device *dev;
diff --git a/arch/arm/mach-omap2/omap-secure.c b/arch/arm/mach-omap2/omap-secure.c
index 0659ab4cb0af..fb9c114b9dd7 100644
--- a/arch/arm/mach-omap2/omap-secure.c
+++ b/arch/arm/mach-omap2/omap-secure.c
@@ -59,8 +59,13 @@ static void __init omap_optee_init_check(void)
 u32 omap_secure_dispatcher(u32 idx, u32 flag, u32 nargs, u32 arg1, u32 arg2,
 							 u32 arg3, u32 arg4)
 {
+	static u32 buf[NR_CPUS][5];
+	u32 *param;
+	int cpu;
 	u32 ret;
-	u32 param[5];
+
+	cpu = get_cpu();
+	param = buf[cpu];
 
 	param[0] = nargs;
 	param[1] = arg1;
@@ -76,6 +81,8 @@ u32 omap_secure_dispatcher(u32 idx, u32 flag, u32 nargs, u32 arg1, u32 arg2,
 	outer_clean_range(__pa(param), __pa(param + 5));
 	ret = omap_smc2(idx, flag, __pa(param));
 
+	put_cpu();
+
 	return ret;
 }
 
@@ -117,10 +124,10 @@ phys_addr_t omap_secure_ram_mempool_base(void)
 }
 
 #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
-u32 omap3_save_secure_ram(void __iomem *addr, int size)
+u32 omap3_save_secure_ram(void *addr, int size)
 {
+	static u32 param[5];
 	u32 ret;
-	u32 param[5];
 
 	if (size != OMAP3_SAVE_SECURE_RAM_SZ)
 		return OMAP3_SAVE_SECURE_RAM_SZ;
@@ -153,8 +160,8 @@ u32 omap3_save_secure_ram(void __iomem *addr, int size)
 u32 rx51_secure_dispatcher(u32 idx, u32 process, u32 flag, u32 nargs,
 			   u32 arg1, u32 arg2, u32 arg3, u32 arg4)
 {
+	static u32 param[5];
 	u32 ret;
-	u32 param[5];
 
 	param[0] = nargs+1; /* RX-51 needs number of arguments + 1 */
 	param[1] = arg1;
diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h
index 172069f31616..9e67d4efdd0c 100644
--- a/arch/arm/mach-omap2/omap-secure.h
+++ b/arch/arm/mach-omap2/omap-secure.h
@@ -73,7 +73,7 @@ extern u32 omap_smc3(u32 id, u32 process, u32 flag, u32 pargs);
 extern phys_addr_t omap_secure_ram_mempool_base(void);
 extern int omap_secure_ram_reserve_memblock(void);
 extern u32 save_secure_ram_context(u32 args_pa);
-extern u32 omap3_save_secure_ram(void __iomem *save_regs, int size);
+extern u32 omap3_save_secure_ram(void *save_regs, int size);
 
 extern u32 rx51_secure_dispatcher(u32 idx, u32 process, u32 flag, u32 nargs,
 				  u32 arg1, u32 arg2, u32 arg3, u32 arg4);
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 5c3845730dbf..6d1eb4eefefe 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -139,7 +139,7 @@ static int __init omap4_sram_init(void)
 		pr_warn("%s:Unable to get sram pool needed to handle errata I688\n",
 			__func__);
 	else
-		sram_sync = (void *)gen_pool_alloc(sram_pool, PAGE_SIZE);
+		sram_sync = (void __iomem *)gen_pool_alloc(sram_pool, PAGE_SIZE);
 
 	return 0;
 }
@@ -314,10 +314,12 @@ void __init omap_gic_of_init(void)
 
 	np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-gic");
 	gic_dist_base_addr = of_iomap(np, 0);
+	of_node_put(np);
 	WARN_ON(!gic_dist_base_addr);
 
 	np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-twd-timer");
 	twd_base = of_iomap(np, 0);
+	of_node_put(np);
 	WARN_ON(!twd_base);
 
 skip_errata_init:
diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index 56d6814bec26..8b3701901991 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -96,9 +96,6 @@ static void _add_clkdev(struct omap_device *od, const char *clk_alias,
  * omap_device, this function adds an entry in the clkdev table of the
  * form <dev-id=dev_name, con-id=role> if it does not exist already.
  *
- * The function is called from inside omap_device_build_ss(), after
- * omap_device_register.
- *
  * This allows drivers to get a pointer to its optional clocks based on its role
  * by calling clk_get(<dev*>, <role>).
  * In the case of the main clock, a "fck" alias is used.
@@ -473,23 +470,6 @@ struct dev_pm_domain omap_device_pm_domain = {
 	}
 };
 
-/**
- * omap_device_register - register an omap_device with one omap_hwmod
- * @pdev: the platform device (omap_device) to register.
- *
- * Register the omap_device structure.  This currently just calls
- * platform_device_register() on the underlying platform_device.
- * Returns the return value of platform_device_register().
- */
-int omap_device_register(struct platform_device *pdev)
-{
-	pr_debug("omap_device: %s: registering\n", pdev->name);
-
-	dev_pm_domain_set(&pdev->dev, &omap_device_pm_domain);
-	return platform_device_add(pdev);
-}
-
-
 /* Public functions for use by device drivers through struct platform_data */
 
 /**
diff --git a/arch/arm/mach-omap2/omap_device.h b/arch/arm/mach-omap2/omap_device.h
index f77e76a7841a..d607532cf5e0 100644
--- a/arch/arm/mach-omap2/omap_device.h
+++ b/arch/arm/mach-omap2/omap_device.h
@@ -71,7 +71,6 @@ int omap_device_idle(struct platform_device *pdev);
 struct omap_device *omap_device_alloc(struct platform_device *pdev,
 				      struct omap_hwmod **ohs, int oh_cnt);
 void omap_device_delete(struct omap_device *od);
-int omap_device_register(struct platform_device *pdev);
 
 struct device *omap_device_get_by_hwmod_name(const char *oh_name);
 
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index ccb0e3732c0d..31d1a21f6041 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -752,8 +752,10 @@ static int __init _init_clkctrl_providers(void)
 
 	for_each_matching_node(np, ti_clkctrl_match_table) {
 		ret = _setup_clkctrl_provider(np);
-		if (ret)
+		if (ret) {
+			of_node_put(np);
 			break;
+		}
 	}
 
 	return ret;
diff --git a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
index 450ab990c66a..9b5c728fb7da 100644
--- a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
@@ -1,18 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * DM81xx hwmod data.
  *
  * Copyright (C) 2010 Texas Instruments, Inc. - https://www.ti.com/
  * Copyright (C) 2013 SKTB SKiT, http://www.skitlab.ru/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
 #include <linux/types.h>
diff --git a/arch/arm/mach-omap2/omap_opp_data.h b/arch/arm/mach-omap2/omap_opp_data.h
index 533dd643069a..88375ab38e31 100644
--- a/arch/arm/mach-omap2/omap_opp_data.h
+++ b/arch/arm/mach-omap2/omap_opp_data.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * OMAP SoC specific OPP Data helpers
  *
@@ -6,15 +7,6 @@
  *	Kevin Hilman
  * Copyright (C) 2010 Nokia Corporation.
  *      Eduardo Valentin
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 #ifndef __ARCH_ARM_MACH_OMAP2_OMAP_OPP_DATA_H
 #define __ARCH_ARM_MACH_OMAP2_OMAP_OPP_DATA_H
diff --git a/arch/arm/mach-omap2/opp3xxx_data.c b/arch/arm/mach-omap2/opp3xxx_data.c
index b610c5fb423b..90257e2fb3d6 100644
--- a/arch/arm/mach-omap2/opp3xxx_data.c
+++ b/arch/arm/mach-omap2/opp3xxx_data.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * OMAP3 OPP table definitions.
  *
@@ -7,15 +8,6 @@
  * Copyright (C) 2010-2011 Nokia Corporation.
  *      Eduardo Valentin
  *      Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 #include <linux/module.h>
 
diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c
index d937c5ef41c6..a9851886017d 100644
--- a/arch/arm/mach-omap2/opp4xxx_data.c
+++ b/arch/arm/mach-omap2/opp4xxx_data.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * OMAP4 OPP table definitions.
  *
@@ -8,15 +9,6 @@
  * Copyright (C) 2010-2011 Nokia Corporation.
  *      Eduardo Valentin
  *      Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 #include <linux/module.h>
 
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index e7fd29a502a0..5b99d602c87b 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -43,17 +43,6 @@ struct pdata_init {
 static struct of_dev_auxdata omap_auxdata_lookup[];
 static struct twl4030_gpio_platform_data twl_gpio_auxdata;
 
-#if IS_ENABLED(CONFIG_OMAP_IOMMU)
-int omap_iommu_set_pwrdm_constraint(struct platform_device *pdev, bool request,
-				    u8 *pwrst);
-#else
-static inline int omap_iommu_set_pwrdm_constraint(struct platform_device *pdev,
-						  bool request, u8 *pwrst)
-{
-	return 0;
-}
-#endif
-
 #ifdef CONFIG_MACH_NOKIA_N8X0
 static void __init omap2420_n8x0_legacy_init(void)
 {
@@ -551,6 +540,8 @@ pdata_quirks_init_clocks(const struct of_device_id *omap_dt_match_table)
 
 		of_platform_populate(np, omap_dt_match_table,
 				     omap_auxdata_lookup, NULL);
+
+		of_node_put(np);
 	}
 }
 
diff --git a/arch/arm/mach-omap2/powerdomains33xx_data.c b/arch/arm/mach-omap2/powerdomains33xx_data.c
index 626055e59aed..1d58fd1a2dce 100644
--- a/arch/arm/mach-omap2/powerdomains33xx_data.c
+++ b/arch/arm/mach-omap2/powerdomains33xx_data.c
@@ -1,16 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * AM33XX Power domain data
  *
  * Copyright (C) 2011-2012 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-omap2/prcm43xx.h b/arch/arm/mach-omap2/prcm43xx.h
index b65cccab6ad9..38ed69b150cb 100644
--- a/arch/arm/mach-omap2/prcm43xx.h
+++ b/arch/arm/mach-omap2/prcm43xx.h
@@ -1,11 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * AM43x PRCM defines
  *
  * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #ifndef __ARCH_ARM_MACH_OMAP2_PRCM_43XX_H
diff --git a/arch/arm/mach-omap2/prm-regbits-33xx.h b/arch/arm/mach-omap2/prm-regbits-33xx.h
index 7dfdff09ddeb..3748c5266ae1 100644
--- a/arch/arm/mach-omap2/prm-regbits-33xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-33xx.h
@@ -1,16 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * AM33XX PRM_XXX register bits
  *
  * Copyright (C) 2011-2012 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #ifndef __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_33XX_H
diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c
index 9144cc0479af..4b65a0f9cf7d 100644
--- a/arch/arm/mach-omap2/prm33xx.c
+++ b/arch/arm/mach-omap2/prm33xx.c
@@ -1,16 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * AM33XX PRM functions
  *
  * Copyright (C) 2011-2012 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-omap2/prm33xx.h b/arch/arm/mach-omap2/prm33xx.h
index a469a36c00d8..3081f3deb650 100644
--- a/arch/arm/mach-omap2/prm33xx.h
+++ b/arch/arm/mach-omap2/prm33xx.h
@@ -1,16 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * AM33XX PRM instance offset macros
  *
  * Copyright (C) 2011-2012 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #ifndef __ARCH_ARM_MACH_OMAP2_PRM33XX_H
diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c
index 1b442b128569..63e73e9b82bc 100644
--- a/arch/arm/mach-omap2/prm3xxx.c
+++ b/arch/arm/mach-omap2/prm3xxx.c
@@ -708,6 +708,7 @@ static int omap3xxx_prm_late_init(void)
 	}
 
 	irq_num = of_irq_get(np, 0);
+	of_node_put(np);
 	if (irq_num == -EPROBE_DEFER)
 		return irq_num;
 
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 65b2d82efa27..fb2d48cfe756 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -752,8 +752,10 @@ int __init omap2_prm_base_init(void)
 		data = (struct omap_prcm_init_data *)match->data;
 
 		ret = of_address_to_resource(np, 0, &res);
-		if (ret)
+		if (ret) {
+			of_node_put(np);
 			return ret;
+		}
 
 		data->mem = ioremap(res.start, resource_size(&res));
 
@@ -799,8 +801,10 @@ int __init omap_prcm_init(void)
 		data = match->data;
 
 		ret = omap2_clk_provider_init(np, data->index, NULL, data->mem);
-		if (ret)
+		if (ret) {
+			of_node_put(np);
 			return ret;
+		}
 	}
 
 	omap_cm_init();
diff --git a/arch/arm/mach-omap2/serial.h b/arch/arm/mach-omap2/serial.h
index c4014f013df0..7ca1fcff453b 100644
--- a/arch/arm/mach-omap2/serial.h
+++ b/arch/arm/mach-omap2/serial.h
@@ -1 +1,66 @@
-#include <mach/serial.h>
+/*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* OMAP2 serial ports */
+#define OMAP2_UART1_BASE	0x4806a000
+#define OMAP2_UART2_BASE	0x4806c000
+#define OMAP2_UART3_BASE	0x4806e000
+
+/* OMAP3 serial ports */
+#define OMAP3_UART1_BASE	OMAP2_UART1_BASE
+#define OMAP3_UART2_BASE	OMAP2_UART2_BASE
+#define OMAP3_UART3_BASE	0x49020000
+#define OMAP3_UART4_BASE	0x49042000	/* Only on 36xx */
+#define OMAP3_UART4_AM35XX_BASE	0x4809E000	/* Only on AM35xx */
+
+/* OMAP4 serial ports */
+#define OMAP4_UART1_BASE	OMAP2_UART1_BASE
+#define OMAP4_UART2_BASE	OMAP2_UART2_BASE
+#define OMAP4_UART3_BASE	0x48020000
+#define OMAP4_UART4_BASE	0x4806e000
+
+/* TI81XX serial ports */
+#define TI81XX_UART1_BASE	0x48020000
+#define TI81XX_UART2_BASE	0x48022000
+#define TI81XX_UART3_BASE	0x48024000
+
+/* AM3505/3517 UART4 */
+#define AM35XX_UART4_BASE	0x4809E000	/* Only on AM3505/3517 */
+
+/* AM33XX serial port */
+#define AM33XX_UART1_BASE	0x44E09000
+
+/* OMAP5 serial ports */
+#define OMAP5_UART1_BASE	OMAP2_UART1_BASE
+#define OMAP5_UART2_BASE	OMAP2_UART2_BASE
+#define OMAP5_UART3_BASE	OMAP4_UART3_BASE
+#define OMAP5_UART4_BASE	OMAP4_UART4_BASE
+#define OMAP5_UART5_BASE	0x48066000
+#define OMAP5_UART6_BASE	0x48068000
+
+/* External port on Zoom2/3 */
+#define ZOOM_UART_BASE		0x10000000
+#define ZOOM_UART_VIRT		0xfa400000
+
+#define OMAP_PORT_SHIFT		2
+#define ZOOM_PORT_SHIFT		1
+
+#define OMAP24XX_BASE_BAUD	(48000000/16)
+
+#ifndef __ASSEMBLER__
+
+struct omap_board_data;
+struct omap_uart_port_info;
+
+extern void omap_serial_init(void);
+extern void omap_serial_board_init(struct omap_uart_port_info *platform_data);
+extern void omap_serial_init_port(struct omap_board_data *bdata,
+		struct omap_uart_port_info *platform_data);
+#endif
diff --git a/arch/arm/mach-omap2/sram.c b/arch/arm/mach-omap2/sram.c
index c98855f5594b..39cf270da718 100644
--- a/arch/arm/mach-omap2/sram.c
+++ b/arch/arm/mach-omap2/sram.c
@@ -18,6 +18,7 @@
 #include <asm/fncpy.h>
 #include <asm/tlb.h>
 #include <asm/cacheflush.h>
+#include <asm/set_memory.h>
 
 #include <asm/mach/map.h>
 
@@ -47,8 +48,68 @@
 #define ROUND_DOWN(value,boundary)	((value) & (~((boundary)-1)))
 
 static unsigned long omap_sram_start;
-static unsigned long omap_sram_skip;
 static unsigned long omap_sram_size;
+static void __iomem *omap_sram_base;
+static unsigned long omap_sram_skip;
+static void __iomem *omap_sram_ceil;
+
+/*
+ * Memory allocator for SRAM: calculates the new ceiling address
+ * for pushing a function using the fncpy API.
+ *
+ * Note that fncpy requires the returned address to be aligned
+ * to an 8-byte boundary.
+ */
+static void *omap_sram_push_address(unsigned long size)
+{
+	unsigned long available, new_ceil = (unsigned long)omap_sram_ceil;
+
+	available = omap_sram_ceil - (omap_sram_base + omap_sram_skip);
+
+	if (size > available) {
+		pr_err("Not enough space in SRAM\n");
+		return NULL;
+	}
+
+	new_ceil -= size;
+	new_ceil = ROUND_DOWN(new_ceil, FNCPY_ALIGN);
+	omap_sram_ceil = IOMEM(new_ceil);
+
+	return (void __force *)omap_sram_ceil;
+}
+
+void *omap_sram_push(void *funcp, unsigned long size)
+{
+	void *sram;
+	unsigned long base;
+	int pages;
+	void *dst = NULL;
+
+	sram = omap_sram_push_address(size);
+	if (!sram)
+		return NULL;
+
+	base = (unsigned long)sram & PAGE_MASK;
+	pages = PAGE_ALIGN(size) / PAGE_SIZE;
+
+	set_memory_rw(base, pages);
+
+	dst = fncpy(sram, funcp, size);
+
+	set_memory_ro(base, pages);
+	set_memory_x(base, pages);
+
+	return dst;
+}
+
+/*
+ * The SRAM context is lost during off-idle and stack
+ * needs to be reset.
+ */
+static void omap_sram_reset(void)
+{
+	omap_sram_ceil = omap_sram_base + omap_sram_size;
+}
 
 /*
  * Depending on the target RAMFS firewall setup, the public usable amount of
@@ -119,6 +180,8 @@ static void __init omap_detect_sram(void)
  */
 static void __init omap2_map_sram(void)
 {
+	unsigned long base;
+	int pages;
 	int cached = 1;
 
 	if (cpu_is_omap34xx()) {
@@ -132,8 +195,30 @@ static void __init omap2_map_sram(void)
 		cached = 0;
 	}
 
-	omap_map_sram(omap_sram_start, omap_sram_size,
-			omap_sram_skip, cached);
+	if (omap_sram_size == 0)
+		return;
+
+	omap_sram_start = ROUND_DOWN(omap_sram_start, PAGE_SIZE);
+	omap_sram_base = __arm_ioremap_exec(omap_sram_start, omap_sram_size, cached);
+	if (!omap_sram_base) {
+		pr_err("SRAM: Could not map\n");
+		return;
+	}
+
+	omap_sram_reset();
+
+	/*
+	 * Looks like we need to preserve some bootloader code at the
+	 * beginning of SRAM for jumping to flash for reboot to work...
+	 */
+	memset_io(omap_sram_base + omap_sram_skip, 0,
+		  omap_sram_size - omap_sram_skip);
+
+	base = (unsigned long)omap_sram_base;
+	pages = PAGE_ALIGN(omap_sram_size) / PAGE_SIZE;
+
+	set_memory_ro(base, pages);
+	set_memory_x(base, pages);
 }
 
 static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
diff --git a/arch/arm/mach-omap2/sram.h b/arch/arm/mach-omap2/sram.h
index 447bd3eed0fd..271062f23482 100644
--- a/arch/arm/mach-omap2/sram.h
+++ b/arch/arm/mach-omap2/sram.h
@@ -4,7 +4,6 @@
  */
 
 #ifndef __ASSEMBLY__
-#include <plat/sram.h>
 
 extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
 				u32 base_cs, u32 force_unlock);
@@ -14,6 +13,10 @@ extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
 
 extern void omap3_sram_restore_context(void);
 
+extern int __init omap_sram_init(void);
+
+extern void *omap_sram_push(void *funcp, unsigned long size);
+
 /* Do not use these */
 extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
 extern unsigned long omap24xx_sram_reprogram_clock_sz;
diff --git a/arch/arm/mach-omap2/ti81xx.h b/arch/arm/mach-omap2/ti81xx.h
index 192b0e7d3eb4..fe9f7f388cbd 100644
--- a/arch/arm/mach-omap2/ti81xx.h
+++ b/arch/arm/mach-omap2/ti81xx.h
@@ -1,16 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * This file contains the address data for various TI81XX modules.
  *
  * Copyright (C) 2010 Texas Instruments, Inc. - https://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #ifndef __ASM_ARCH_TI81XX_H
diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c
index 86f1ac4c2412..ea02d40405c4 100644
--- a/arch/arm/mach-omap2/vc.c
+++ b/arch/arm/mach-omap2/vc.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * OMAP Voltage Controller (VC) interface
  *
  * Copyright (C) 2011 Texas Instruments, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 #include <linux/kernel.h>
 #include <linux/delay.h>
@@ -895,4 +892,3 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm)
 	else if (cpu_is_omap44xx())
 		omap4_vc_init_channel(voltdm);
 }
-
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index e94a61901ffd..0044b2823710 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -1,11 +1,13 @@
 # SPDX-License-Identifier: GPL-2.0-only
 menuconfig ARCH_ORION5X
 	bool "Marvell Orion"
-	depends on MMU && ARCH_MULTI_V5
+	depends on ARCH_MULTI_V5
+	depends on CPU_LITTLE_ENDIAN
 	select CPU_FEROCEON
 	select GPIOLIB
 	select MVEBU_MBUS
 	select FORCE_PCI
+	select PCI_QUIRKS
 	select PHYLIB if NETDEVICES
 	select PLAT_ORION_LEGACY
 	help
@@ -29,6 +31,7 @@ config ARCH_ORION5X_DT
 config MACH_DB88F5281
 	bool "Marvell Orion-2 Development Board"
 	select I2C_BOARDINFO if I2C
+	depends on ATAGS && UNUSED_BOARD_FILES
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell Orion-2 (88F5281) Development Board
@@ -36,6 +39,7 @@ config MACH_DB88F5281
 config MACH_RD88F5182
 	bool "Marvell Orion-NAS Reference Design"
 	select I2C_BOARDINFO if I2C
+	depends on ATAGS && UNUSED_BOARD_FILES
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell Orion-NAS (88F5182) RD2
@@ -51,6 +55,7 @@ config MACH_RD88F5182_DT
 config MACH_KUROBOX_PRO
 	bool "KuroBox Pro"
 	select I2C_BOARDINFO if I2C
+	depends on ATAGS
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  KuroBox Pro platform.
@@ -58,24 +63,28 @@ config MACH_KUROBOX_PRO
 config MACH_DNS323
 	bool "D-Link DNS-323"
 	select I2C_BOARDINFO if I2C
+	depends on ATAGS
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  D-Link DNS-323 platform.
 
 config MACH_TS209
 	bool "QNAP TS-109/TS-209"
+	depends on ATAGS
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  QNAP TS-109/TS-209 platform.
 
 config MACH_TERASTATION_PRO2
 	bool "Buffalo Terastation Pro II/Live"
+	depends on ATAGS
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Buffalo Terastation Pro II/Live platform.
 
 config MACH_LINKSTATION_PRO
 	bool "Buffalo Linkstation Pro/Live"
+	depends on ATAGS
 	select I2C_BOARDINFO if I2C
 	help
 	  Say 'Y' here if you want your kernel to support the
@@ -91,6 +100,7 @@ config MACH_LINKSTATION_MINI
 
 config MACH_LINKSTATION_LS_HGL
 	bool "Buffalo Linkstation LS-HGL"
+	depends on ATAGS && UNUSED_BOARD_FILES
 	select I2C_BOARDINFO if I2C
 	help
 	  Say 'Y' here if you want your kernel to support the
@@ -98,24 +108,28 @@ config MACH_LINKSTATION_LS_HGL
 
 config MACH_TS409
 	bool "QNAP TS-409"
+	depends on ATAGS
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  QNAP TS-409 platform.
 
 config MACH_WRT350N_V2
 	bool "Linksys WRT350N v2"
+	depends on ATAGS && UNUSED_BOARD_FILES
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Linksys WRT350N v2 platform.
 
 config MACH_TS78XX
 	bool "Technologic Systems TS-78xx"
+	depends on ATAGS
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Technologic Systems TS-78xx platform.
 
 config MACH_MV2120
 	bool "HP Media Vault mv2120"
+	depends on ATAGS
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  HP Media Vault mv2120 or mv5100.
@@ -129,6 +143,7 @@ config MACH_D2NET_DT
 
 config MACH_NET2BIG
 	bool "LaCie 2Big Network"
+	depends on ATAGS
 	select I2C_BOARDINFO if I2C
 	help
 	  Say 'Y' here if you want your kernel to support the
@@ -143,24 +158,28 @@ config MACH_MSS2_DT
 
 config MACH_WNR854T
 	bool "Netgear WNR854T"
+	depends on ATAGS && UNUSED_BOARD_FILES
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Netgear WNR854T platform.
 
 config MACH_RD88F5181L_GE
 	bool "Marvell Orion-VoIP GE Reference Design"
+	depends on ATAGS && UNUSED_BOARD_FILES
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell Orion-VoIP GE (88F5181L) RD.
 
 config MACH_RD88F5181L_FXO
 	bool "Marvell Orion-VoIP FXO Reference Design"
+	depends on ATAGS && UNUSED_BOARD_FILES
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell Orion-VoIP FXO (88F5181L) RD.
 
 config MACH_RD88F6183AP_GE
 	bool "Marvell Orion-1-90 AP GE Reference Design"
+	depends on ATAGS && UNUSED_BOARD_FILES
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell Orion-1-90 (88F6183) AP GE RD.
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
index 1a585a62d5e6..572c3520f7fe 100644
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -1,5 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-orion/include
+ccflags-y := -I$(srctree)/arch/arm/plat-orion/include
 
 obj-y				+= common.o pci.o irq.o mpp.o
 obj-$(CONFIG_MACH_DB88F5281)	+= db88f5281-setup.o
diff --git a/arch/arm/mach-orion5x/board-d2net.c b/arch/arm/mach-orion5x/board-d2net.c
index a89376a5cd92..0297e302d7bc 100644
--- a/arch/arm/mach-orion5x/board-d2net.c
+++ b/arch/arm/mach-orion5x/board-d2net.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-orion5x/board-d2net.c
  *
  * LaCie d2Network and Big Disk Network NAS setup
  *
  * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-orion5x/board-dt.c b/arch/arm/mach-orion5x/board-dt.c
index 3d36f1d95196..e3736ffc8347 100644
--- a/arch/arm/mach-orion5x/board-dt.c
+++ b/arch/arm/mach-orion5x/board-dt.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright 2012 (C), Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
  * arch/arm/mach-orion5x/board-dt.c
  *
  * Flattened Device Tree board initialization
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-orion5x/board-rd88f5182.c b/arch/arm/mach-orion5x/board-rd88f5182.c
index b7b0f52f4c0a..596601367989 100644
--- a/arch/arm/mach-orion5x/board-rd88f5182.c
+++ b/arch/arm/mach-orion5x/board-rd88f5182.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-orion5x/rd88f5182-setup.c
  *
  * Marvell Orion-NAS Reference Design Setup
  *
  * Maintainer: Ronen Shitrit <rshitrit@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 #include <linux/gpio.h>
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-orion5x/bridge-regs.h b/arch/arm/mach-orion5x/bridge-regs.h
index 305598eaaee1..fe85bc5b131f 100644
--- a/arch/arm/mach-orion5x/bridge-regs.h
+++ b/arch/arm/mach-orion5x/bridge-regs.h
@@ -1,10 +1,5 @@
-/*
- * Orion CPU Bridge Registers
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Orion CPU Bridge Registers */
 
 #ifndef __ASM_ARCH_BRIDGE_REGS_H
 #define __ASM_ARCH_BRIDGE_REGS_H
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 7bcb41137bbf..2e711b7252c6 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-orion5x/common.c
  *
  * Core functions for Marvell Orion 5x SoCs
  *
  * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index 39eae10ac8de..fe1a4cef1ba2 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-orion5x/db88f5281-setup.c
  *
  * Marvell Orion-2 Development Board Setup
  *
  * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 #include <linux/gpio.h>
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 87cb47220e82..d69259b6b60d 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -696,12 +696,12 @@ static void __init dns323_init(void)
 			pr_err("DNS-323: failed to setup power-off GPIO\n");
 		pm_power_off = dns323c_power_off;
 
-		/* Now, -this- should theorically be done by the sata_mv driver
+		/* Now, -this- should theoretically be done by the sata_mv driver
 		 * once I figure out what's going on there. Maybe the behaviour
 		 * of the LEDs should be somewhat passed via the platform_data.
 		 * for now, just whack the register and make the LEDs happy
 		 *
-		 * Note: AFAIK, rev B1 needs the same treatement but I'll let
+		 * Note: AFAIK, rev B1 needs the same treatment but I'll let
 		 * somebody else test it.
 		 */
 		writel(0x5, ORION5X_SATA_VIRT_BASE + 0x2c);
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
index ac4af2283bef..e17727e53cb4 100644
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-orion5x/irq.c
  *
  * Core IRQ functions for Marvell Orion System On Chip
  *
  * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 #include <linux/gpio.h>
 #include <linux/kernel.h>
@@ -49,6 +46,6 @@ void __init orion5x_init_irq(void)
 	/*
 	 * Initialize gpiolib for GPIOs 0-31.
 	 */
-	orion_gpio_init(NULL, 0, 32, GPIO_VIRT_BASE, 0,
+	orion_gpio_init(0, 32, GPIO_VIRT_BASE, 0,
 			IRQ_ORION5X_GPIO_START, gpio0_irqs);
 }
diff --git a/arch/arm/mach-orion5x/irqs.h b/arch/arm/mach-orion5x/irqs.h
index 506c8e0b30c4..a70c47cfa6bc 100644
--- a/arch/arm/mach-orion5x/irqs.h
+++ b/arch/arm/mach-orion5x/irqs.h
@@ -1,11 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * IRQ definitions for Orion SoC
  *
  *  Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- *
- *  This file is licensed under the terms of the GNU General Public
- *  License version 2. This program is licensed "as is" without any
- *  warranty of any kind, whether express or implied.
  */
 
 #ifndef __ASM_ARCH_IRQS_H
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index 83d43cff4bd7..acba06618080 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-orion5x/kurobox_pro-setup.c
  *
  * Maintainer: Ronen Shitrit <rshitrit@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 #include <linux/gpio.h>
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c
index 47ba6e0502f5..af07f617465f 100644
--- a/arch/arm/mach-orion5x/ls_hgl-setup.c
+++ b/arch/arm/mach-orion5x/ls_hgl-setup.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-orion5x/ls_hgl-setup.c
  *
  * Maintainer: Zhu Qingsen <zhuqs@cn.fujitsu.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-orion5x/mpp.c b/arch/arm/mach-orion5x/mpp.c
index 19ef18594415..b9855dce6ba0 100644
--- a/arch/arm/mach-orion5x/mpp.c
+++ b/arch/arm/mach-orion5x/mpp.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-orion5x/mpp.c
  *
  * MPP functions for Marvell Orion 5x SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
index bf6be4cfd238..695cc683cd83 100644
--- a/arch/arm/mach-orion5x/net2big-setup.c
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-orion5x/net2big-setup.c
  *
  * LaCie 2Big Network NAS setup
  *
  * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/kernel.h>
@@ -432,4 +429,3 @@ MACHINE_START(NET2BIG, "LaCie 2Big Network")
 	.fixup		= tag_fixup_mem32,
 	.restart	= orion5x_restart,
 MACHINE_END
-
diff --git a/arch/arm/mach-orion5x/orion5x.h b/arch/arm/mach-orion5x/orion5x.h
index 2b66120fba86..26f1ccb8cb28 100644
--- a/arch/arm/mach-orion5x/orion5x.h
+++ b/arch/arm/mach-orion5x/orion5x.h
@@ -1,12 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Generic definitions of Orion SoC flavors:
  *  Orion-1, Orion-VoIP, Orion-NAS, Orion-2, and Orion-1-90.
  *
  * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #ifndef __ASM_ARCH_ORION5X_H
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
index 92e938bba20d..888fdc9099c5 100644
--- a/arch/arm/mach-orion5x/pci.c
+++ b/arch/arm/mach-orion5x/pci.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-orion5x/pci.c
  *
  * PCI and PCIe functions for Marvell Orion System On Chip
  *
  * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/kernel.h>
@@ -515,14 +512,20 @@ static int __init pci_setup(struct pci_sys_data *sys)
 /*****************************************************************************
  * General PCIe + PCI
  ****************************************************************************/
+
+/*
+ * The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it
+ * is operating as a root complex this needs to be switched to
+ * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on
+ * the device. Decoding setup is handled by the orion code.
+ */
 static void rc_pci_fixup(struct pci_dev *dev)
 {
-	/*
-	 * Prevent enumeration of root complex.
-	 */
 	if (dev->bus->parent == NULL && dev->devfn == 0) {
 		int i;
 
+		dev->class &= 0xff;
+		dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
 		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
 			dev->resource[i].start = 0;
 			dev->resource[i].end   = 0;
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index c65ab7db36ad..432fc8357d9e 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
  *
  * Marvell Orion-VoIP FXO Reference Design Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 #include <linux/gpio.h>
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index 76b8138d9d79..d4b1a9c3cd36 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
  *
  * Marvell Orion-VoIP GE Reference Design Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 #include <linux/gpio.h>
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index fe3e67c81fb8..6ffcfc6445e2 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-orion5x/rd88f5182-setup.c
  *
  * Marvell Orion-NAS Reference Design Setup
  *
  * Maintainer: Ronen Shitrit <rshitrit@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 #include <linux/gpio.h>
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
index 5f388a1ed1e4..93f74fd6b4da 100644
--- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-orion5x/rd88f6183-ap-ge-setup.c
  *
  * Marvell Orion-1-90 AP GE Reference Design Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 #include <linux/gpio.h>
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index a39764faf2a0..af810e7ccd79 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-orion5x/ts78xx-setup.c
  *
  * Maintainer: Alexander Clouter <alex@digriz.org.uk>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index 83589a28a491..e5f327054dd3 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -1,10 +1,5 @@
-/*
- * arch/arm/mach-orion5x/wnr854t-setup.c
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// arch/arm/mach-orion5x/wnr854t-setup.c
 #include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index cea08d4a2597..e6a2da6662df 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -1,10 +1,5 @@
-/*
- * arch/arm/mach-orion5x/wrt350n-v2-setup.c
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// arch/arm/mach-orion5x/wrt350n-v2-setup.c
 #include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
diff --git a/arch/arm/mach-oxnas/Kconfig b/arch/arm/mach-oxnas/Kconfig
index bee5f64c2e5f..a9ded7079268 100644
--- a/arch/arm/mach-oxnas/Kconfig
+++ b/arch/arm/mach-oxnas/Kconfig
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 menuconfig ARCH_OXNAS
 	bool "Oxford Semiconductor OXNAS Family SoCs"
+	depends on (ARCH_MULTI_V5 && CPU_LITTLE_ENDIAN) || ARCH_MULTI_V6
 	select ARCH_HAS_RESET_CONTROLLER
 	select COMMON_CLK_OXNAS
 	select GPIOLIB
@@ -11,7 +12,6 @@ menuconfig ARCH_OXNAS
 	select RESET_OXNAS
 	select VERSATILE_FPGA_IRQ
 	select PINCTRL
-	depends on ARCH_MULTI_V5 || ARCH_MULTI_V6
 	help
 	  Support for OxNas SoC family developed by Oxford Semiconductor.
 
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index f7520a6cc7d4..b90d98bae68d 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -1,4 +1,19 @@
 # SPDX-License-Identifier: GPL-2.0-only
+menuconfig ARCH_PXA
+	bool "PXA2xx/PXA3xx-based"
+	depends on ARCH_MULTI_V5
+	depends on CPU_LITTLE_ENDIAN
+	select ARM_CPU_SUSPEND if PM
+	select CLKSRC_PXA
+	select CLKSRC_MMIO
+	select TIMER_OF
+	select CPU_XSCALE if !CPU_XSC3
+	select GPIO_PXA
+	select GPIOLIB
+	select PLAT_PXA
+	help
+	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
+
 if ARCH_PXA
 
 menu "Intel PXA2xx/PXA3xx Implementations"
@@ -39,14 +54,18 @@ config MACH_PXA3XX_DT
 	  the device tree. Needn't select any other machine while
 	  MACH_PXA3XX_DT is enabled.
 
+if ATAGS
+
 config ARCH_LUBBOCK
 	bool "Intel DBPXA250 Development Platform (aka Lubbock)"
+	depends on UNUSED_BOARD_FILES
 	select GPIO_REG
 	select PXA25x
 	select SA1111
 
 config MACH_MAINSTONE
 	bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
+	depends on UNUSED_BOARD_FILES
 	select GPIO_REG
 	select PXA27x
 
@@ -56,23 +75,27 @@ config MACH_ZYLONITE
 
 config MACH_ZYLONITE300
 	bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
+	depends on UNUSED_BOARD_FILES
 	select CPU_PXA300
 	select CPU_PXA310
 	select MACH_ZYLONITE
 
 config MACH_ZYLONITE320
 	bool "PXA3xx Development Platform (aka Zylonite) PXA320"
+	depends on UNUSED_BOARD_FILES
 	select CPU_PXA320
 	select MACH_ZYLONITE
 
 config MACH_LITTLETON
 	bool "PXA3xx Form Factor Platform (aka Littleton)"
+	depends on UNUSED_BOARD_FILES
 	select CPU_PXA300
 	select CPU_PXA310
 	select PXA3xx
 
 config MACH_TAVOREVB
 	bool "PXA930 Evaluation Board (aka TavorEVB)"
+	depends on UNUSED_BOARD_FILES
 	select CPU_PXA930
 	select CPU_PXA935
 	select PXA3xx
@@ -81,6 +104,7 @@ config MACH_TAVOREVB
 
 config MACH_SAAR
 	bool "PXA930 Handheld Platform (aka SAAR)"
+	depends on UNUSED_BOARD_FILES
 	select CPU_PXA930
 	select CPU_PXA935
 	select PXA3xx
@@ -91,10 +115,12 @@ comment "Third Party Dev Platforms (sorted by vendor name)"
 
 config ARCH_PXA_IDP
 	bool "Accelent Xscale IDP"
+	depends on UNUSED_BOARD_FILES
 	select PXA25x
 
 config ARCH_VIPER
 	bool "Arcom/Eurotech VIPER SBC"
+	depends on UNUSED_BOARD_FILES
 	select ARCOM_PCMCIA
 	select I2C_GPIO if I2C=y
 	select ISA
@@ -102,17 +128,20 @@ config ARCH_VIPER
 
 config MACH_ARCOM_ZEUS
 	bool "Arcom/Eurotech ZEUS SBC"
+	depends on UNUSED_BOARD_FILES
 	select ARCOM_PCMCIA
 	select ISA
 	select PXA27x
 
 config MACH_BALLOON3
 	bool "Balloon 3 board"
+	depends on UNUSED_BOARD_FILES
 	select IWMMXT
 	select PXA27x
 
 config MACH_CSB726
 	bool "Enable Cogent CSB726 System On a Module"
+	depends on UNUSED_BOARD_FILES
 	select IWMMXT
 	select PXA27x
 	help
@@ -121,16 +150,19 @@ config MACH_CSB726
 
 config CSB726_CSB701
 	bool "Enable support for CSB701 baseboard"
+	depends on UNUSED_BOARD_FILES
 	depends on MACH_CSB726
 
 config MACH_CM_X300
 	bool "CompuLab CM-X300 modules"
+	depends on UNUSED_BOARD_FILES
 	select CPU_PXA300
 	select CPU_PXA310
 	select PXA3xx
 
 config MACH_CAPC7117
 	bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
+	depends on UNUSED_BOARD_FILES
 	select CPU_PXA320
 	select PXA3xx
 
@@ -153,18 +185,9 @@ config GUMSTIX_AM300EPD
 
 endchoice
 
-config MACH_INTELMOTE2
-	bool "Intel Mote 2 Platform"
-	select IWMMXT
-	select PXA27x
-
-config MACH_STARGATE2
-	bool "Intel Stargate 2 Platform"
-	select IWMMXT
-	select PXA27x
-
 config MACH_XCEP
 	bool "Iskratel Electronics XCEP"
+	depends on UNUSED_BOARD_FILES
 	select MTD
 	select MTD_CFI
 	select MTD_CFI_INTELEXT
@@ -176,6 +199,7 @@ config MACH_XCEP
 
 config TRIZEPS_PXA
 	bool "PXA based Keith und Koep Trizeps DIMM-Modules"
+	depends on UNUSED_BOARD_FILES
 
 config MACH_TRIZEPS4
 	bool "Keith und Koep Trizeps4 DIMM-Module"
@@ -217,15 +241,18 @@ config TRIZEPS_PCMCIA
 
 config MACH_LOGICPD_PXA270
 	bool "LogicPD PXA270 Card Engine Development Platform"
+	depends on UNUSED_BOARD_FILES
 	select PXA27x
 
 config MACH_PCM027
 	bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
+	depends on UNUSED_BOARD_FILES
 	select IWMMXT
 	select PXA27x
 
 config MACH_PCM990_BASEBOARD
 	bool "PHYTEC PCM-990 development board"
+	depends on UNUSED_BOARD_FILES
 	depends on MACH_PCM027
 
 choice
@@ -245,30 +272,36 @@ endchoice
 
 config MACH_COLIBRI
 	bool "Toradex Colibri PXA270"
+	depends on UNUSED_BOARD_FILES
 	select PXA27x
 
 config MACH_COLIBRI_PXA270_INCOME
 	bool "Income s.r.o. PXA270 SBC"
+	depends on UNUSED_BOARD_FILES
 	depends on MACH_COLIBRI
 	select PXA27x
 
 config MACH_COLIBRI300
 	bool "Toradex Colibri PXA300/310"
+	depends on UNUSED_BOARD_FILES
 	select CPU_PXA300
 	select CPU_PXA310
 	select PXA3xx
 
 config MACH_COLIBRI320
 	bool "Toradex Colibri PXA320"
+	depends on UNUSED_BOARD_FILES
 	select CPU_PXA320
 	select PXA3xx
 
 config MACH_COLIBRI_EVALBOARD
 	bool "Toradex Colibri Evaluation Carrier Board support"
+	depends on UNUSED_BOARD_FILES
 	depends on MACH_COLIBRI || MACH_COLIBRI300 || MACH_COLIBRI320
 
 config MACH_VPAC270
 	bool "Voipac PXA270"
+	depends on UNUSED_BOARD_FILES
 	select HAVE_PATA_PLATFORM
 	select PXA27x
 	help
@@ -278,24 +311,29 @@ comment "End-user Products (sorted by vendor name)"
 
 config MACH_H4700
 	bool "HP iPAQ hx4700"
+	depends on UNUSED_BOARD_FILES
 	select IWMMXT
 	select PXA27x
 
 config MACH_H5000
 	bool "HP iPAQ h5000"
+	depends on UNUSED_BOARD_FILES
 	select PXA25x
 
 config MACH_HIMALAYA
 	bool "HTC Himalaya Support"
+	depends on UNUSED_BOARD_FILES
 	select CPU_PXA26x
 
 config MACH_MAGICIAN
 	bool "Enable HTC Magician Support"
+	depends on UNUSED_BOARD_FILES
 	select IWMMXT
 	select PXA27x
 
 config MACH_MIOA701
 	bool "Mitac Mio A701 Support"
+	depends on UNUSED_BOARD_FILES
 	select IWMMXT
 	select PXA27x
 	help
@@ -305,6 +343,7 @@ config MACH_MIOA701
 
 config PXA_EZX
 	bool "Motorola EZX Platform"
+	depends on UNUSED_BOARD_FILES
 	select IWMMXT
 	select PXA27x
 
@@ -340,16 +379,19 @@ config MACH_EZX_E2
 
 config MACH_MP900C
 	bool "Nec Mobilepro 900/c"
+	depends on UNUSED_BOARD_FILES
 	select PXA25x
 
 config ARCH_PXA_PALM
 	bool "PXA based Palm PDAs"
+	depends on UNUSED_BOARD_FILES
 
 config MACH_PALM27X
 	bool
 
 config MACH_PALMTE2
 	bool "Palm Tungsten|E2"
+	depends on UNUSED_BOARD_FILES
 	default y
 	depends on ARCH_PXA_PALM
 	select PXA25x
@@ -368,6 +410,7 @@ config MACH_PALMTC
 
 config MACH_PALMT5
 	bool "Palm Tungsten|T5"
+	depends on UNUSED_BOARD_FILES
 	default y
 	depends on ARCH_PXA_PALM
 	select IWMMXT
@@ -379,6 +422,7 @@ config MACH_PALMT5
 
 config MACH_PALMTX
 	bool "Palm T|X"
+	depends on UNUSED_BOARD_FILES
 	default y
 	depends on ARCH_PXA_PALM
 	select IWMMXT
@@ -390,6 +434,7 @@ config MACH_PALMTX
 
 config MACH_PALMZ72
 	bool "Palm Zire 72"
+	depends on UNUSED_BOARD_FILES
 	default y
 	depends on ARCH_PXA_PALM
 	select IWMMXT
@@ -401,6 +446,7 @@ config MACH_PALMZ72
 
 config MACH_PALMLD
 	bool "Palm LifeDrive"
+	depends on UNUSED_BOARD_FILES
 	default y
 	depends on ARCH_PXA_PALM
 	select IWMMXT
@@ -416,6 +462,7 @@ config PALM_TREO
 
 config MACH_CENTRO
 	bool "Palm Centro 685 (GSM)"
+	depends on UNUSED_BOARD_FILES
 	default y
 	depends on ARCH_PXA_PALM
 	select IWMMXT
@@ -428,6 +475,7 @@ config MACH_CENTRO
 
 config MACH_TREO680
 	bool "Palm Treo 680"
+	depends on UNUSED_BOARD_FILES
 	default y
 	depends on ARCH_PXA_PALM
 	select IWMMXT
@@ -460,24 +508,28 @@ config PXA_SHARPSL_DETECT_MACH_ID
 config MACH_POODLE
 	bool "Enable Sharp SL-5600 (Poodle) Support"
 	depends on PXA_SHARPSL
+	depends on UNUSED_BOARD_FILES
 	select PXA25x
 	select SHARP_LOCOMO
 
 config MACH_CORGI
 	bool "Enable Sharp SL-C700 (Corgi) Support"
 	depends on PXA_SHARPSL
+	depends on UNUSED_BOARD_FILES
 	select PXA25x
 	select PXA_SHARP_C7xx
 
 config MACH_SHEPHERD
 	bool "Enable Sharp SL-C750 (Shepherd) Support"
 	depends on PXA_SHARPSL
+	depends on UNUSED_BOARD_FILES
 	select PXA25x
 	select PXA_SHARP_C7xx
 
 config MACH_HUSKY
 	bool "Enable Sharp SL-C760 (Husky) Support"
 	depends on PXA_SHARPSL
+	depends on UNUSED_BOARD_FILES
 	select PXA25x
 	select PXA_SHARP_C7xx
 
@@ -504,6 +556,7 @@ config MACH_BORZOI
 
 config MACH_TOSA
 	bool "Enable Sharp SL-6000x (Tosa) Support"
+	depends on UNUSED_BOARD_FILES
 	depends on PXA_SHARPSL
 	select PXA25x
 
@@ -527,11 +580,13 @@ config TOSA_USE_EXT_KEYCODES
 
 config MACH_ICONTROL
 	bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM"
+	depends on UNUSED_BOARD_FILES
 	select CPU_PXA320
 	select PXA3xx
 
 config ARCH_PXA_ESERIES
 	bool "PXA based Toshiba e-series PDAs"
+	depends on UNUSED_BOARD_FILES
 	select FB_W100
 	select FB
 	select PXA25x
@@ -586,7 +641,10 @@ config MACH_E800
 
 config MACH_ZIPIT2
 	bool "Zipit Z2 Handheld"
+	depends on UNUSED_BOARD_FILES
 	select PXA27x
+
+endif # ATAGS
 endmenu
 
 config PXA25x
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 177abe584dd5..0aec36e67dc1 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -37,7 +37,8 @@ obj-$(CONFIG_MACH_SAAR)		+= saar.o
 obj-$(CONFIG_ARCH_PXA_IDP)	+= idp.o
 obj-$(CONFIG_ARCH_VIPER)	+= viper.o
 obj-$(CONFIG_MACH_ARCOM_ZEUS)	+= zeus.o
-obj-$(CONFIG_MACH_BALLOON3)	+= balloon3.o
+obj-$(CONFIG_ARCOM_PCMCIA)	+= viper-pcmcia.o
+obj-$(CONFIG_MACH_BALLOON3)	+= balloon3.o balloon3-pcmcia.o
 obj-$(CONFIG_MACH_CSB726)	+= csb726.o
 obj-$(CONFIG_CSB726_CSB701)	+= csb701.o
 obj-$(CONFIG_MACH_CM_X300)      += cm-x300.o
@@ -45,22 +46,22 @@ obj-$(CONFIG_MACH_CAPC7117)     += capc7117.o mxm8x10.o
 obj-$(CONFIG_ARCH_GUMSTIX)	+= gumstix.o
 obj-$(CONFIG_GUMSTIX_AM200EPD)	+= am200epd.o
 obj-$(CONFIG_GUMSTIX_AM300EPD)	+= am300epd.o
-obj-$(CONFIG_MACH_INTELMOTE2)	+= stargate2.o
-obj-$(CONFIG_MACH_STARGATE2)	+= stargate2.o
 obj-$(CONFIG_MACH_XCEP)         += xcep.o
 obj-$(CONFIG_MACH_TRIZEPS4)	+= trizeps4.o
+obj-$(CONFIG_TRIZEPS_PCMCIA)	+= trizeps4-pcmcia.o
 obj-$(CONFIG_MACH_LOGICPD_PXA270)	+= lpd270.o
 obj-$(CONFIG_MACH_PCM027)		+= pcm027.o
 obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
-obj-$(CONFIG_MACH_COLIBRI)			+= colibri-pxa270.o
+obj-$(CONFIG_MACH_COLIBRI)		+= colibri-pxa270.o colibri-pcmcia.o
 obj-$(CONFIG_MACH_COLIBRI_EVALBOARD)	+= colibri-evalboard.o
 obj-$(CONFIG_MACH_COLIBRI_PXA270_INCOME)	+= colibri-pxa270-income.o
 obj-$(CONFIG_MACH_COLIBRI300)	+= colibri-pxa3xx.o colibri-pxa300.o
-obj-$(CONFIG_MACH_COLIBRI320)	+= colibri-pxa3xx.o colibri-pxa320.o
-obj-$(CONFIG_MACH_VPAC270)	+= vpac270.o
+obj-$(CONFIG_MACH_COLIBRI320)	+= colibri-pxa3xx.o colibri-pxa320.o colibri-pcmcia.o
+obj-$(CONFIG_MACH_VPAC270)	+= vpac270.o vpac270-pcmcia.o
 
 # End-user Products
 obj-$(CONFIG_MACH_H4700)	+= hx4700.o
+obj-$(CONFIG_MACH_H4700)	+= hx4700-pcmcia.o
 obj-$(CONFIG_MACH_H5000)	+= h5000.o
 obj-$(CONFIG_MACH_HIMALAYA)	+= himalaya.o
 obj-$(CONFIG_MACH_MAGICIAN)	+= magician.o
@@ -68,12 +69,12 @@ obj-$(CONFIG_MACH_MIOA701)	+= mioa701.o mioa701_bootresume.o
 obj-$(CONFIG_PXA_EZX)           += ezx.o
 obj-$(CONFIG_MACH_MP900C)	+= mp900.o
 obj-$(CONFIG_MACH_PALMTE2)	+= palmte2.o
-obj-$(CONFIG_MACH_PALMTC)	+= palmtc.o
+obj-$(CONFIG_MACH_PALMTC)	+= palmtc.o palmtc-pcmcia.o
 obj-$(CONFIG_MACH_PALM27X)	+= palm27x.o
 obj-$(CONFIG_MACH_PALMT5)	+= palmt5.o
-obj-$(CONFIG_MACH_PALMTX)	+= palmtx.o
+obj-$(CONFIG_MACH_PALMTX)	+= palmtx.o palmtx-pcmcia.o
 obj-$(CONFIG_MACH_PALMZ72)	+= palmz72.o
-obj-$(CONFIG_MACH_PALMLD)	+= palmld.o
+obj-$(CONFIG_MACH_PALMLD)	+= palmld.o palmld-pcmcia.o
 obj-$(CONFIG_PALM_TREO)		+= palmtreo.o
 obj-$(CONFIG_PXA_SHARP_C7xx)	+= corgi.o sharpsl_pm.o corgi_pm.o
 obj-$(CONFIG_PXA_SHARP_Cxx00)	+= spitz.o sharpsl_pm.o spitz_pm.o
@@ -81,6 +82,7 @@ obj-$(CONFIG_MACH_POODLE)	+= poodle.o
 obj-$(CONFIG_MACH_TOSA)		+= tosa.o
 obj-$(CONFIG_MACH_ICONTROL)     += icontrol.o mxm8x10.o
 obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o
+obj-$(CONFIG_MACH_E740)		+= e740-pcmcia.o
 obj-$(CONFIG_MACH_ZIPIT2)	+= z2.o
 
 obj-$(CONFIG_PXA_SYSTEMS_CPLDS)	+= pxa_cplds_irqs.o
diff --git a/arch/arm/mach-pxa/include/mach/addr-map.h b/arch/arm/mach-pxa/addr-map.h
index 93cfe7dbfec6..93cfe7dbfec6 100644
--- a/arch/arm/mach-pxa/include/mach/addr-map.h
+++ b/arch/arm/mach-pxa/addr-map.h
diff --git a/arch/arm/mach-pxa/am300epd.c b/arch/arm/mach-pxa/am300epd.c
index 17d08abeeb17..4b55bc89db8f 100644
--- a/arch/arm/mach-pxa/am300epd.c
+++ b/arch/arm/mach-pxa/am300epd.c
@@ -30,7 +30,7 @@
 
 #include "gumstix.h"
 #include "mfp-pxa25x.h"
-#include <mach/irqs.h>
+#include "irqs.h"
 #include <linux/platform_data/video-pxafb.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/balloon3-pcmcia.c b/arch/arm/mach-pxa/balloon3-pcmcia.c
new file mode 100644
index 000000000000..6a27b76cc603
--- /dev/null
+++ b/arch/arm/mach-pxa/balloon3-pcmcia.c
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * linux/drivers/pcmcia/pxa2xx_balloon3.c
+ *
+ * Balloon3 PCMCIA specific routines.
+ *
+ *  Author:	Nick Bane
+ *  Created:	June, 2006
+ *  Copyright:	Toby Churchill Ltd
+ *  Derived from pxa2xx_mainstone.c, by Nico Pitre
+ *
+ * Various modification by Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include "balloon3.h"
+
+#include <asm/mach-types.h>
+
+#include <pcmcia/soc_common.h>
+
+static int balloon3_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+	uint16_t ver;
+
+	ver = __raw_readw(BALLOON3_FPGA_VER);
+	if (ver < 0x4f08)
+		pr_warn("The FPGA code, version 0x%04x, is too old. "
+			"PCMCIA/CF support might be broken in this version!",
+			ver);
+
+	skt->socket.pci_irq = BALLOON3_BP_CF_NRDY_IRQ;
+	skt->stat[SOC_STAT_CD].gpio = BALLOON3_GPIO_S0_CD;
+	skt->stat[SOC_STAT_CD].name = "PCMCIA0 CD";
+	skt->stat[SOC_STAT_BVD1].irq = BALLOON3_BP_NSTSCHG_IRQ;
+	skt->stat[SOC_STAT_BVD1].name = "PCMCIA0 STSCHG";
+
+	return 0;
+}
+
+static unsigned long balloon3_pcmcia_status[2] = {
+	BALLOON3_CF_nSTSCHG_BVD1,
+	BALLOON3_CF_nSTSCHG_BVD1
+};
+
+static void balloon3_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+				    struct pcmcia_state *state)
+{
+	uint16_t status;
+	int flip;
+
+	/* This actually reads the STATUS register */
+	status = __raw_readw(BALLOON3_CF_STATUS_REG);
+	flip = (status ^ balloon3_pcmcia_status[skt->nr])
+		& BALLOON3_CF_nSTSCHG_BVD1;
+	/*
+	 * Workaround for STSCHG which can't be deasserted:
+	 * We therefore disable/enable corresponding IRQs
+	 * as needed to avoid IRQ locks.
+	 */
+	if (flip) {
+		balloon3_pcmcia_status[skt->nr] = status;
+		if (status & BALLOON3_CF_nSTSCHG_BVD1)
+			enable_irq(BALLOON3_BP_NSTSCHG_IRQ);
+		else
+			disable_irq(BALLOON3_BP_NSTSCHG_IRQ);
+	}
+
+	state->ready	= !!(status & BALLOON3_CF_nIRQ);
+	state->bvd1	= !!(status & BALLOON3_CF_nSTSCHG_BVD1);
+	state->bvd2	= 0;	/* not available */
+	state->vs_3v	= 1;	/* Always true its a CF card */
+	state->vs_Xv	= 0;	/* not available */
+}
+
+static int balloon3_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+				       const socket_state_t *state)
+{
+	__raw_writew(BALLOON3_CF_RESET, BALLOON3_CF_CONTROL_REG +
+			((state->flags & SS_RESET) ?
+			BALLOON3_FPGA_SETnCLR : 0));
+	return 0;
+}
+
+static struct pcmcia_low_level balloon3_pcmcia_ops = {
+	.owner			= THIS_MODULE,
+	.hw_init		= balloon3_pcmcia_hw_init,
+	.socket_state		= balloon3_pcmcia_socket_state,
+	.configure_socket	= balloon3_pcmcia_configure_socket,
+	.first			= 0,
+	.nr			= 1,
+};
+
+static struct platform_device *balloon3_pcmcia_device;
+
+static int __init balloon3_pcmcia_init(void)
+{
+	int ret;
+
+	if (!machine_is_balloon3())
+		return -ENODEV;
+
+	balloon3_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+	if (!balloon3_pcmcia_device)
+		return -ENOMEM;
+
+	ret = platform_device_add_data(balloon3_pcmcia_device,
+			&balloon3_pcmcia_ops, sizeof(balloon3_pcmcia_ops));
+
+	if (!ret)
+		ret = platform_device_add(balloon3_pcmcia_device);
+
+	if (ret)
+		platform_device_put(balloon3_pcmcia_device);
+
+	return ret;
+}
+
+static void __exit balloon3_pcmcia_exit(void)
+{
+	platform_device_unregister(balloon3_pcmcia_device);
+}
+
+module_init(balloon3_pcmcia_init);
+module_exit(balloon3_pcmcia_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Nick Bane <nick@cecomputing.co.uk>");
+MODULE_ALIAS("platform:pxa2xx-pcmcia");
+MODULE_DESCRIPTION("Balloon3 board CF/PCMCIA driver");
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index 26140249c784..896d47d9a8dc 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -40,8 +40,8 @@
 #include <asm/mach/flash.h>
 
 #include "pxa27x.h"
-#include <mach/balloon3.h>
-#include <mach/audio.h>
+#include "balloon3.h"
+#include <linux/platform_data/asoc-pxa.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include "udc.h"
diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/balloon3.h
index 04f3639c4082..04f3639c4082 100644
--- a/arch/arm/mach-pxa/include/mach/balloon3.h
+++ b/arch/arm/mach-pxa/balloon3.h
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 2e35354b61f5..01f364a66446 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -40,6 +40,8 @@
 #include <linux/spi/spi_gpio.h>
 #include <linux/spi/tdo24m.h>
 
+#include <linux/soc/pxa/cpu.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/setup.h>
@@ -51,7 +53,7 @@
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <linux/platform_data/mtd-nand-pxa3xx.h>
-#include <mach/audio.h>
+#include <linux/platform_data/asoc-pxa.h>
 #include <linux/platform_data/usb-pxa3xx-ulpi.h>
 
 #include <asm/mach/map.h>
@@ -354,13 +356,13 @@ static struct platform_device cm_x300_spi_gpio = {
 static struct gpiod_lookup_table cm_x300_spi_gpiod_table = {
 	.dev_id         = "spi_gpio",
 	.table          = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_LCD_SCL,
+		GPIO_LOOKUP("pca9555.1", GPIO_LCD_SCL - GPIO_LCD_BASE,
 			    "sck", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", GPIO_LCD_DIN,
+		GPIO_LOOKUP("pca9555.1", GPIO_LCD_DIN - GPIO_LCD_BASE,
 			    "mosi", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", GPIO_LCD_DOUT,
+		GPIO_LOOKUP("pca9555.1", GPIO_LCD_DOUT - GPIO_LCD_BASE,
 			    "miso", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", GPIO_LCD_CS,
+		GPIO_LOOKUP("pca9555.1", GPIO_LCD_CS - GPIO_LCD_BASE,
 			    "cs", GPIO_ACTIVE_HIGH),
 		{ },
 	},
diff --git a/arch/arm/mach-pxa/colibri-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c
index b9c173ede891..b62af07b8f96 100644
--- a/arch/arm/mach-pxa/colibri-evalboard.c
+++ b/arch/arm/mach-pxa/colibri-evalboard.c
@@ -13,7 +13,6 @@
 #include <linux/interrupt.h>
 #include <linux/gpio/machine.h>
 #include <asm/mach-types.h>
-#include <mach/hardware.h>
 #include <asm/mach/arch.h>
 #include <linux/i2c.h>
 #include <linux/platform_data/i2c-pxa.h>
diff --git a/arch/arm/mach-pxa/colibri-pcmcia.c b/arch/arm/mach-pxa/colibri-pcmcia.c
new file mode 100644
index 000000000000..9da7b478e5eb
--- /dev/null
+++ b/arch/arm/mach-pxa/colibri-pcmcia.c
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * linux/drivers/pcmcia/pxa2xx_colibri.c
+ *
+ * Driver for Toradex Colibri PXA270 CF socket
+ *
+ * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+
+#include <pcmcia/soc_common.h>
+
+#define	COLIBRI270_RESET_GPIO	53
+#define	COLIBRI270_PPEN_GPIO	107
+#define	COLIBRI270_BVD1_GPIO	83
+#define	COLIBRI270_BVD2_GPIO	82
+#define	COLIBRI270_DETECT_GPIO	84
+#define	COLIBRI270_READY_GPIO	1
+
+#define	COLIBRI320_RESET_GPIO	77
+#define	COLIBRI320_PPEN_GPIO	57
+#define	COLIBRI320_BVD1_GPIO	53
+#define	COLIBRI320_BVD2_GPIO	79
+#define	COLIBRI320_DETECT_GPIO	81
+#define	COLIBRI320_READY_GPIO	29
+
+enum {
+	DETECT = 0,
+	READY = 1,
+	BVD1 = 2,
+	BVD2 = 3,
+	PPEN = 4,
+	RESET = 5,
+};
+
+/* Contents of this array are configured on-the-fly in init function */
+static struct gpio colibri_pcmcia_gpios[] = {
+	{ 0,	GPIOF_IN,	"PCMCIA Detect" },
+	{ 0,	GPIOF_IN,	"PCMCIA Ready" },
+	{ 0,	GPIOF_IN,	"PCMCIA BVD1" },
+	{ 0,	GPIOF_IN,	"PCMCIA BVD2" },
+	{ 0,	GPIOF_INIT_LOW,	"PCMCIA PPEN" },
+	{ 0,	GPIOF_INIT_HIGH,"PCMCIA Reset" },
+};
+
+static int colibri_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+	int ret;
+
+	ret = gpio_request_array(colibri_pcmcia_gpios,
+				ARRAY_SIZE(colibri_pcmcia_gpios));
+	if (ret)
+		goto err1;
+
+	skt->socket.pci_irq = gpio_to_irq(colibri_pcmcia_gpios[READY].gpio);
+	skt->stat[SOC_STAT_CD].irq = gpio_to_irq(colibri_pcmcia_gpios[DETECT].gpio);
+	skt->stat[SOC_STAT_CD].name = "PCMCIA CD";
+
+err1:
+	return ret;
+}
+
+static void colibri_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
+{
+	gpio_free_array(colibri_pcmcia_gpios,
+			ARRAY_SIZE(colibri_pcmcia_gpios));
+}
+
+static void colibri_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+					struct pcmcia_state *state)
+{
+
+	state->detect = !!gpio_get_value(colibri_pcmcia_gpios[DETECT].gpio);
+	state->ready  = !!gpio_get_value(colibri_pcmcia_gpios[READY].gpio);
+	state->bvd1   = !!gpio_get_value(colibri_pcmcia_gpios[BVD1].gpio);
+	state->bvd2   = !!gpio_get_value(colibri_pcmcia_gpios[BVD2].gpio);
+	state->vs_3v  = 1;
+	state->vs_Xv  = 0;
+}
+
+static int
+colibri_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+				const socket_state_t *state)
+{
+	gpio_set_value(colibri_pcmcia_gpios[PPEN].gpio,
+			!(state->Vcc == 33 && state->Vpp < 50));
+	gpio_set_value(colibri_pcmcia_gpios[RESET].gpio,
+			state->flags & SS_RESET);
+	return 0;
+}
+
+static struct pcmcia_low_level colibri_pcmcia_ops = {
+	.owner			= THIS_MODULE,
+
+	.first			= 0,
+	.nr			= 1,
+
+	.hw_init		= colibri_pcmcia_hw_init,
+	.hw_shutdown		= colibri_pcmcia_hw_shutdown,
+
+	.socket_state		= colibri_pcmcia_socket_state,
+	.configure_socket	= colibri_pcmcia_configure_socket,
+};
+
+static struct platform_device *colibri_pcmcia_device;
+
+static int __init colibri_pcmcia_init(void)
+{
+	int ret;
+
+	if (!machine_is_colibri() && !machine_is_colibri320())
+		return -ENODEV;
+
+	colibri_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+	if (!colibri_pcmcia_device)
+		return -ENOMEM;
+
+	/* Colibri PXA270 */
+	if (machine_is_colibri()) {
+		colibri_pcmcia_gpios[RESET].gpio	= COLIBRI270_RESET_GPIO;
+		colibri_pcmcia_gpios[PPEN].gpio		= COLIBRI270_PPEN_GPIO;
+		colibri_pcmcia_gpios[BVD1].gpio		= COLIBRI270_BVD1_GPIO;
+		colibri_pcmcia_gpios[BVD2].gpio		= COLIBRI270_BVD2_GPIO;
+		colibri_pcmcia_gpios[DETECT].gpio	= COLIBRI270_DETECT_GPIO;
+		colibri_pcmcia_gpios[READY].gpio	= COLIBRI270_READY_GPIO;
+	/* Colibri PXA320 */
+	} else if (machine_is_colibri320()) {
+		colibri_pcmcia_gpios[RESET].gpio	= COLIBRI320_RESET_GPIO;
+		colibri_pcmcia_gpios[PPEN].gpio		= COLIBRI320_PPEN_GPIO;
+		colibri_pcmcia_gpios[BVD1].gpio		= COLIBRI320_BVD1_GPIO;
+		colibri_pcmcia_gpios[BVD2].gpio		= COLIBRI320_BVD2_GPIO;
+		colibri_pcmcia_gpios[DETECT].gpio	= COLIBRI320_DETECT_GPIO;
+		colibri_pcmcia_gpios[READY].gpio	= COLIBRI320_READY_GPIO;
+	}
+
+	ret = platform_device_add_data(colibri_pcmcia_device,
+		&colibri_pcmcia_ops, sizeof(colibri_pcmcia_ops));
+
+	if (!ret)
+		ret = platform_device_add(colibri_pcmcia_device);
+
+	if (ret)
+		platform_device_put(colibri_pcmcia_device);
+
+	return ret;
+}
+
+static void __exit colibri_pcmcia_exit(void)
+{
+	platform_device_unregister(colibri_pcmcia_device);
+}
+
+module_init(colibri_pcmcia_init);
+module_exit(colibri_pcmcia_exit);
+
+MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("PCMCIA support for Toradex Colibri PXA270/PXA320");
+MODULE_ALIAS("platform:pxa2xx-pcmcia");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c
index e5879e8b0682..f6eaf464ca83 100644
--- a/arch/arm/mach-pxa/colibri-pxa270-income.c
+++ b/arch/arm/mach-pxa/colibri-pxa270-income.c
@@ -25,7 +25,6 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <mach/hardware.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include "pxa27x.h"
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index 2f2cd2ae4187..5dc669752836 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -23,7 +23,7 @@
 #include <asm/mach-types.h>
 #include <linux/sizes.h>
 
-#include <mach/audio.h>
+#include <linux/platform_data/asoc-pxa.h>
 #include "colibri.h"
 #include "pxa27x.h"
 
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index 82052dfd96b6..11ca6c4795e7 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -13,6 +13,7 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
+#include <linux/soc/pxa/cpu.h>
 
 #include <asm/mach-types.h>
 #include <linux/sizes.h>
@@ -23,7 +24,7 @@
 #include "colibri.h"
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <linux/platform_data/video-pxafb.h>
-#include <mach/audio.h>
+#include <linux/platform_data/asoc-pxa.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index 35dd3adb7712..1a59056e181e 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -24,7 +24,7 @@
 #include "colibri.h"
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <mach/audio.h>
+#include <linux/platform_data/asoc-pxa.h>
 #include "pxa27x-udc.h"
 #include "udc.h"
 
diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c
index 3cead80a2b37..77d6ef5fa42d 100644
--- a/arch/arm/mach-pxa/colibri-pxa3xx.c
+++ b/arch/arm/mach-pxa/colibri-pxa3xx.c
@@ -13,12 +13,11 @@
 #include <linux/gpio.h>
 #include <linux/etherdevice.h>
 #include <asm/mach-types.h>
-#include <mach/hardware.h>
 #include <linux/sizes.h>
 #include <asm/system_info.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
-#include <mach/pxa3xx-regs.h>
+#include "pxa3xx-regs.h"
 #include "mfp-pxa300.h"
 #include "colibri.h"
 #include <linux/platform_data/mmc-pxamci.h>
diff --git a/arch/arm/mach-pxa/colibri.h b/arch/arm/mach-pxa/colibri.h
index 85525d49e321..01a46f36cc1f 100644
--- a/arch/arm/mach-pxa/colibri.h
+++ b/arch/arm/mach-pxa/colibri.h
@@ -3,7 +3,7 @@
 #define _COLIBRI_H_
 
 #include <net/ax88796.h>
-#include <mach/mfp.h>
+#include "mfp.h"
 
 /*
  * base board glue for PXA270 module
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 593c7f793da5..5738496717e2 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -39,7 +39,6 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <mach/hardware.h>
 #include <asm/irq.h>
 
 #include <asm/mach/arch.h>
@@ -50,7 +49,7 @@
 #include <linux/platform_data/irda-pxaficp.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include "udc.h"
-#include <mach/corgi.h>
+#include "corgi.h"
 #include "sharpsl_pm.h"
 
 #include <asm/mach/sharpsl_param.h>
@@ -473,6 +472,25 @@ static struct platform_device corgiled_device = {
 	},
 };
 
+static struct gpiod_lookup_table corgi_audio_gpio_table = {
+	.dev_id = "corgi-audio",
+	.table = {
+		GPIO_LOOKUP("sharp-scoop",
+			    CORGI_GPIO_MUTE_L - CORGI_SCOOP_GPIO_BASE,
+			    "mute-l", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("sharp-scoop",
+			    CORGI_GPIO_MUTE_R - CORGI_SCOOP_GPIO_BASE,
+			    "mute-r", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("sharp-scoop",
+			    CORGI_GPIO_APM_ON - CORGI_SCOOP_GPIO_BASE,
+			    "apm-on", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("sharp-scoop",
+			    CORGI_GPIO_MIC_BIAS - CORGI_SCOOP_GPIO_BASE,
+			    "mic-bias", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 /*
  * Corgi Audio
  */
@@ -530,6 +548,16 @@ static struct pxa2xx_spi_controller corgi_spi_info = {
 	.num_chipselect	= 3,
 };
 
+static struct gpiod_lookup_table corgi_spi_gpio_table = {
+	.dev_id = "spi1",
+	.table = {
+		GPIO_LOOKUP_IDX("gpio-pxa", CORGI_GPIO_ADS7846_CS, "cs", 0, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("gpio-pxa", CORGI_GPIO_LCDCON_CS, "cs", 1, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("gpio-pxa", CORGI_GPIO_MAX1111_CS, "cs", 2, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static void corgi_wait_for_hsync(void)
 {
 	while (gpio_get_value(CORGI_GPIO_HSYNC))
@@ -548,10 +576,6 @@ static struct ads7846_platform_data corgi_ads7846_info = {
 	.wait_for_sync		= corgi_wait_for_hsync,
 };
 
-static struct pxa2xx_spi_chip corgi_ads7846_chip = {
-	.gpio_cs	= CORGI_GPIO_ADS7846_CS,
-};
-
 static void corgi_bl_kick_battery(void)
 {
 	void (*kick_batt)(void);
@@ -580,14 +604,6 @@ static struct corgi_lcd_platform_data corgi_lcdcon_info = {
 	.kick_battery		= corgi_bl_kick_battery,
 };
 
-static struct pxa2xx_spi_chip corgi_lcdcon_chip = {
-	.gpio_cs	= CORGI_GPIO_LCDCON_CS,
-};
-
-static struct pxa2xx_spi_chip corgi_max1111_chip = {
-	.gpio_cs	= CORGI_GPIO_MAX1111_CS,
-};
-
 static struct spi_board_info corgi_spi_devices[] = {
 	{
 		.modalias	= "ads7846",
@@ -595,7 +611,6 @@ static struct spi_board_info corgi_spi_devices[] = {
 		.bus_num	= 1,
 		.chip_select	= 0,
 		.platform_data	= &corgi_ads7846_info,
-		.controller_data= &corgi_ads7846_chip,
 		.irq		= PXA_GPIO_TO_IRQ(CORGI_GPIO_TP_INT),
 	}, {
 		.modalias	= "corgi-lcd",
@@ -603,18 +618,17 @@ static struct spi_board_info corgi_spi_devices[] = {
 		.bus_num	= 1,
 		.chip_select	= 1,
 		.platform_data	= &corgi_lcdcon_info,
-		.controller_data= &corgi_lcdcon_chip,
 	}, {
 		.modalias	= "max1111",
 		.max_speed_hz	= 450000,
 		.bus_num	= 1,
 		.chip_select	= 2,
-		.controller_data= &corgi_max1111_chip,
 	},
 };
 
 static void __init corgi_init_spi(void)
 {
+	gpiod_add_lookup_table(&corgi_spi_gpio_table);
 	pxa2xx_set_spi_info(1, &corgi_spi_info);
 	gpiod_add_lookup_table(&corgi_lcdcon_gpio_table);
 	spi_register_board_info(ARRAY_AND_SIZE(corgi_spi_devices));
@@ -749,6 +763,7 @@ static void __init corgi_init(void)
 
  	pxa_set_udc_info(&udc_info);
 	gpiod_add_lookup_table(&corgi_mci_gpio_table);
+	gpiod_add_lookup_table(&corgi_audio_gpio_table);
 	pxa_set_mci_info(&corgi_mci_platform_data);
 	pxa_set_ficp_info(&corgi_ficp_platform_data);
 	pxa_set_i2c_info(NULL);
diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/corgi.h
index b565ca7b8cda..b565ca7b8cda 100644
--- a/arch/arm/mach-pxa/include/mach/corgi.h
+++ b/arch/arm/mach-pxa/corgi.h
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index 092dcb9fced5..555a5c1afd96 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -19,10 +19,9 @@
 
 #include <asm/irq.h>
 #include <asm/mach-types.h>
-#include <mach/hardware.h>
 
-#include <mach/corgi.h>
-#include <mach/pxa2xx-regs.h>
+#include "corgi.h"
+#include "pxa2xx-regs.h"
 #include "sharpsl_pm.h"
 
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index 98fcdc6e2944..410b1af87d55 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -17,12 +17,13 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+
 #include "csb726.h"
 #include "pxa27x.h"
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <mach/audio.h>
-#include <mach/smemc.h>
+#include <linux/platform_data/asoc-pxa.h>
+#include "smemc.h"
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/csb726.h b/arch/arm/mach-pxa/csb726.h
index 30d7cf926b84..628928743bd5 100644
--- a/arch/arm/mach-pxa/csb726.h
+++ b/arch/arm/mach-pxa/csb726.h
@@ -7,7 +7,7 @@
 #ifndef CSB726_H
 #define CSB726_H
 
-#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
 
 #define CSB726_GPIO_IRQ_LAN	52
 #define CSB726_GPIO_IRQ_SM501	53
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 09b8495f3fd9..a7b92dd1ca9e 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -9,21 +9,23 @@
 #include <linux/dmaengine.h>
 #include <linux/spi/pxa2xx_spi.h>
 #include <linux/platform_data/i2c-pxa.h>
+#include <linux/soc/pxa/cpu.h>
 
 #include "udc.h"
 #include <linux/platform_data/usb-pxa3xx-ulpi.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/irda-pxaficp.h>
-#include <mach/irqs.h>
+#include "irqs.h"
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <linux/platform_data/keypad-pxa27x.h>
 #include <linux/platform_data/media/camera-pxa.h>
-#include <mach/audio.h>
-#include <mach/hardware.h>
+#include <linux/platform_data/asoc-pxa.h>
 #include <linux/platform_data/mmp_dma.h>
 #include <linux/platform_data/mtd-nand-pxa3xx.h>
 
+#include "regs-ost.h"
+#include "reset.h"
 #include "devices.h"
 #include "generic.h"
 
@@ -1118,3 +1120,12 @@ void __init pxa2xx_set_dmac_info(struct mmp_dma_platdata *dma_pdata)
 {
 	pxa_register_device(&pxa2xx_pxa_dma, dma_pdata);
 }
+
+void __init pxa_register_wdt(unsigned int reset_status)
+{
+	struct resource res = DEFINE_RES_MEM(OST_PHYS, OST_LEN);
+
+	reset_status &= RESET_STATUS_WATCHDOG;
+	platform_device_register_resndata(NULL, "sa1100_wdt", -1, &res, 1,
+					  &reset_status, sizeof(reset_status));
+}
diff --git a/arch/arm/mach-pxa/e740-pcmcia.c b/arch/arm/mach-pxa/e740-pcmcia.c
new file mode 100644
index 000000000000..11a2c5d42920
--- /dev/null
+++ b/arch/arm/mach-pxa/e740-pcmcia.c
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Toshiba e740 PCMCIA specific routines.
+ *
+ * (c) 2004 Ian Molton <spyro@f2s.com>
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#include "eseries-gpio.h"
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <pcmcia/soc_common.h>
+
+static int e740_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+	if (skt->nr == 0) {
+		skt->stat[SOC_STAT_CD].gpio = GPIO_E740_PCMCIA_CD0;
+		skt->stat[SOC_STAT_CD].name = "CF card detect";
+		skt->stat[SOC_STAT_RDY].gpio = GPIO_E740_PCMCIA_RDY0;
+		skt->stat[SOC_STAT_RDY].name = "CF ready";
+	} else {
+		skt->stat[SOC_STAT_CD].gpio = GPIO_E740_PCMCIA_CD1;
+		skt->stat[SOC_STAT_CD].name = "Wifi switch";
+		skt->stat[SOC_STAT_RDY].gpio = GPIO_E740_PCMCIA_RDY1;
+		skt->stat[SOC_STAT_RDY].name = "Wifi ready";
+	}
+
+	return 0;
+}
+
+static void e740_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+					struct pcmcia_state *state)
+{
+	state->vs_3v  = 1;
+	state->vs_Xv  = 0;
+}
+
+static int e740_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+					const socket_state_t *state)
+{
+	if (state->flags & SS_RESET) {
+		if (skt->nr == 0)
+			gpio_set_value(GPIO_E740_PCMCIA_RST0, 1);
+		else
+			gpio_set_value(GPIO_E740_PCMCIA_RST1, 1);
+	} else {
+		if (skt->nr == 0)
+			gpio_set_value(GPIO_E740_PCMCIA_RST0, 0);
+		else
+			gpio_set_value(GPIO_E740_PCMCIA_RST1, 0);
+	}
+
+	switch (state->Vcc) {
+	case 0:	/* Socket off */
+		if (skt->nr == 0)
+			gpio_set_value(GPIO_E740_PCMCIA_PWR0, 0);
+		else
+			gpio_set_value(GPIO_E740_PCMCIA_PWR1, 1);
+		break;
+	case 50:
+	case 33: /* socket on */
+		if (skt->nr == 0)
+			gpio_set_value(GPIO_E740_PCMCIA_PWR0, 1);
+		else
+			gpio_set_value(GPIO_E740_PCMCIA_PWR1, 0);
+		break;
+	default:
+		printk(KERN_ERR "e740_cs: Unsupported Vcc: %d\n", state->Vcc);
+	}
+
+	return 0;
+}
+
+static struct pcmcia_low_level e740_pcmcia_ops = {
+	.owner            = THIS_MODULE,
+	.hw_init          = e740_pcmcia_hw_init,
+	.socket_state     = e740_pcmcia_socket_state,
+	.configure_socket = e740_pcmcia_configure_socket,
+	.nr               = 2,
+};
+
+static struct platform_device *e740_pcmcia_device;
+
+static int __init e740_pcmcia_init(void)
+{
+	int ret;
+
+	if (!machine_is_e740())
+		return -ENODEV;
+
+	e740_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+	if (!e740_pcmcia_device)
+		return -ENOMEM;
+
+	ret = platform_device_add_data(e740_pcmcia_device, &e740_pcmcia_ops,
+					sizeof(e740_pcmcia_ops));
+
+	if (!ret)
+		ret = platform_device_add(e740_pcmcia_device);
+
+	if (ret)
+		platform_device_put(e740_pcmcia_device);
+
+	return ret;
+}
+
+static void __exit e740_pcmcia_exit(void)
+{
+	platform_device_unregister(e740_pcmcia_device);
+}
+
+module_init(e740_pcmcia_init);
+module_exit(e740_pcmcia_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_ALIAS("platform:pxa2xx-pcmcia");
+MODULE_DESCRIPTION("e740 PCMCIA platform support");
diff --git a/arch/arm/mach-pxa/include/mach/eseries-gpio.h b/arch/arm/mach-pxa/eseries-gpio.h
index 5c645600d401..5c645600d401 100644
--- a/arch/arm/mach-pxa/include/mach/eseries-gpio.h
+++ b/arch/arm/mach-pxa/eseries-gpio.h
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index f37c44b6139d..2e4daeab6278 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -1,13 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Hardware definitions for the Toshiba eseries PDAs
  *
  * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
  */
 
 #include <linux/clkdev.h>
@@ -24,6 +19,7 @@
 #include <linux/mtd/rawnand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/memblock.h>
+#include <linux/gpio/machine.h>
 
 #include <video/w100fb.h>
 
@@ -32,9 +28,9 @@
 #include <asm/mach-types.h>
 
 #include "pxa25x.h"
-#include <mach/eseries-gpio.h>
+#include "eseries-gpio.h"
 #include "eseries-irq.h"
-#include <mach/audio.h>
+#include <linux/platform_data/asoc-pxa.h>
 #include <linux/platform_data/video-pxafb.h>
 #include "udc.h"
 #include <linux/platform_data/irda-pxaficp.h>
@@ -85,11 +81,10 @@ int eseries_tmio_enable(struct platform_device *dev)
 	return 0;
 }
 
-int eseries_tmio_disable(struct platform_device *dev)
+void eseries_tmio_disable(struct platform_device *dev)
 {
 	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
 	gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 0);
-	return 0;
 }
 
 int eseries_tmio_suspend(struct platform_device *dev)
@@ -138,7 +133,6 @@ static void __init __maybe_unused eseries_register_clks(void)
 
 static struct tc6387xb_platform_data e330_tc6387xb_info = {
 	.enable   = &eseries_tmio_enable,
-	.disable  = &eseries_tmio_disable,
 	.suspend  = &eseries_tmio_suspend,
 	.resume   = &eseries_tmio_resume,
 };
@@ -520,6 +514,16 @@ static struct platform_device e740_audio_device = {
 	.id		= -1,
 };
 
+static struct gpiod_lookup_table e740_audio_gpio_table = {
+	.dev_id = "e740-audio",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa",  GPIO_E740_WM9705_nAVDD2, "Audio power",  GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-pxa",  GPIO_E740_AMP_ON, "Output amp",  GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-pxa",  GPIO_E740_MIC_ON, "Mic amp", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 /* ----------------------------------------------------------------------- */
 
 static struct platform_device *e740_devices[] __initdata = {
@@ -540,6 +544,7 @@ static void __init e740_init(void)
 			"UDCCLK", &pxa25x_device_udc.dev),
 	eseries_get_tmio_gpios();
 	gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
+	gpiod_add_lookup_table(&e740_audio_gpio_table);
 	platform_add_devices(ARRAY_AND_SIZE(e740_devices));
 	pxa_set_ac97_info(NULL);
 	pxa_set_ficp_info(&e7xx_ficp_platform_data);
@@ -699,7 +704,6 @@ static struct tc6393xb_platform_data e750_tc6393xb_info = {
 	.irq_base       = IRQ_BOARD_START,
 	.scr_pll2cr     = 0x0cc1,
 	.scr_gper       = 0,
-	.gpio_base      = -1,
 	.suspend        = &eseries_tmio_suspend,
 	.resume         = &eseries_tmio_resume,
 	.enable         = &eseries_tmio_enable,
@@ -716,6 +720,15 @@ static struct platform_device e750_tc6393xb_device = {
 	.resource      = eseries_tmio_resources,
 };
 
+static struct gpiod_lookup_table e750_audio_gpio_table = {
+	.dev_id = "e750-audio",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa",  GPIO_E750_HP_AMP_OFF, "Output amp",  GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("gpio-pxa",  GPIO_E750_SPK_AMP_OFF, "Mic amp", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static struct platform_device e750_audio_device = {
 	.name		= "e750-audio",
 	.id		= -1,
@@ -740,6 +753,7 @@ static void __init e750_init(void)
 			"GPIO11_CLK", NULL),
 	eseries_get_tmio_gpios();
 	gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
+	gpiod_add_lookup_table(&e750_audio_gpio_table);
 	platform_add_devices(ARRAY_AND_SIZE(e750_devices));
 	pxa_set_ac97_info(NULL);
 	pxa_set_ficp_info(&e7xx_ficp_platform_data);
@@ -918,7 +932,6 @@ static struct tc6393xb_platform_data e800_tc6393xb_info = {
 	.irq_base       = IRQ_BOARD_START,
 	.scr_pll2cr     = 0x0cc1,
 	.scr_gper       = 0,
-	.gpio_base      = -1,
 	.suspend        = &eseries_tmio_suspend,
 	.resume         = &eseries_tmio_resume,
 	.enable         = &eseries_tmio_enable,
@@ -935,6 +948,15 @@ static struct platform_device e800_tc6393xb_device = {
 	.resource      = eseries_tmio_resources,
 };
 
+static struct gpiod_lookup_table e800_audio_gpio_table = {
+	.dev_id = "e800-audio",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa",  GPIO_E800_HP_AMP_OFF, "Output amp",  GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("gpio-pxa",  GPIO_E800_SPK_AMP_ON, "Mic amp", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static struct platform_device e800_audio_device = {
 	.name		= "e800-audio",
 	.id		= -1,
@@ -959,6 +981,7 @@ static void __init e800_init(void)
 			"GPIO11_CLK", NULL),
 	eseries_get_tmio_gpios();
 	gpiod_add_lookup_table(&e800_gpio_vbus_gpiod_table);
+	gpiod_add_lookup_table(&e800_audio_gpio_table);
 	platform_add_devices(ARRAY_AND_SIZE(e800_devices));
 	pxa_set_ac97_info(NULL);
 }
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index eb85950e7c0e..69c2ec02a16c 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -29,7 +29,6 @@
 #include "pxa27x.h"
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <mach/hardware.h>
 #include <linux/platform_data/keypad-pxa27x.h>
 #include <linux/platform_data/media/camera-pxa.h>
 
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index ab7cdffd7ea8..02fdde7e3e34 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -17,15 +17,18 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/soc/pxa/cpu.h>
+#include <linux/soc/pxa/smemc.h>
+#include <linux/clk/pxa.h>
 
-#include <mach/hardware.h>
 #include <asm/mach/map.h>
 #include <asm/mach-types.h>
 
-#include <mach/irqs.h>
-#include <mach/reset.h>
-#include <mach/smemc.h>
-#include <mach/pxa3xx-regs.h>
+#include "addr-map.h"
+#include "irqs.h"
+#include "reset.h"
+#include "smemc.h"
+#include "pxa3xx-regs.h"
 
 #include "generic.h"
 #include <clocksource/pxa.h>
@@ -46,28 +49,47 @@ void clear_reset_status(unsigned int mask)
 void __init pxa_timer_init(void)
 {
 	if (cpu_is_pxa25x())
-		pxa25x_clocks_init();
+		pxa25x_clocks_init(io_p2v(0x41300000));
 	if (cpu_is_pxa27x())
-		pxa27x_clocks_init();
+		pxa27x_clocks_init(io_p2v(0x41300000));
 	if (cpu_is_pxa3xx())
-		pxa3xx_clocks_init();
+		pxa3xx_clocks_init(io_p2v(0x41340000), io_p2v(0x41350000));
 	pxa_timer_nodt_init(IRQ_OST0, io_p2v(0x40a00000));
 }
 
-/*
- * Get the clock frequency as reflected by CCCR and the turbo flag.
- * We assume these values have been applied via a fcs.
- * If info is not 0 we also display the current settings.
- */
-unsigned int get_clk_frequency_khz(int info)
+void pxa_smemc_set_pcmcia_timing(int sock, u32 mcmem, u32 mcatt, u32 mcio)
 {
-	if (cpu_is_pxa25x())
-		return pxa25x_get_clk_frequency_khz(info);
-	else if (cpu_is_pxa27x())
-		return pxa27x_get_clk_frequency_khz(info);
-	return 0;
+	__raw_writel(mcmem, MCMEM(sock));
+	__raw_writel(mcatt, MCATT(sock));
+	__raw_writel(mcio, MCIO(sock));
+}
+EXPORT_SYMBOL_GPL(pxa_smemc_set_pcmcia_timing);
+
+void pxa_smemc_set_pcmcia_socket(int nr)
+{
+	switch (nr) {
+	case 0:
+		__raw_writel(0, MECR);
+		break;
+	case 1:
+		/*
+		 * We have at least one socket, so set MECR:CIT
+		 * (Card Is There)
+		 */
+		__raw_writel(MECR_CIT, MECR);
+		break;
+	case 2:
+		/* Set CIT and MECR:NOS (Number Of Sockets) */
+		__raw_writel(MECR_CIT | MECR_NOS, MECR);
+		break;
+	}
+}
+EXPORT_SYMBOL_GPL(pxa_smemc_set_pcmcia_socket);
+
+void __iomem *pxa_smemc_get_mdrefr(void)
+{
+	return MDREFR;
 }
-EXPORT_SYMBOL(get_clk_frequency_khz);
 
 /*
  * Intel PXA2xx internal register mapping.
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 3b7873f8e1f8..7bb1499de4c5 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -10,7 +10,6 @@
 
 struct irq_data;
 
-extern unsigned int get_clk_frequency_khz(int info);
 extern void __init pxa_dt_irq_init(int (*fn)(struct irq_data *,
 					     unsigned int));
 extern void __init pxa_map_io(void);
@@ -23,19 +22,16 @@ extern void pxa_timer_init(void);
 #define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
 
 #define pxa25x_handle_irq icip_handle_irq
-extern int __init pxa25x_clocks_init(void);
 extern void __init pxa25x_init_irq(void);
 extern void __init pxa25x_map_io(void);
 extern void __init pxa26x_init_irq(void);
 
 #define pxa27x_handle_irq ichp_handle_irq
-extern int __init pxa27x_clocks_init(void);
 extern unsigned	pxa27x_get_clk_frequency_khz(int);
 extern void __init pxa27x_init_irq(void);
 extern void __init pxa27x_map_io(void);
 
 #define pxa3xx_handle_irq ichp_handle_irq
-extern int __init pxa3xx_clocks_init(void);
 extern void __init pxa3xx_init_irq(void);
 extern void __init pxa3xx_map_io(void);
 
@@ -71,8 +67,3 @@ extern unsigned pxa25x_get_clk_frequency_khz(int);
 #define pxa27x_get_clk_frequency_khz(x)		(0)
 #endif
 
-#ifdef CONFIG_PXA3xx
-extern unsigned	pxa3xx_get_clk_frequency_khz(int);
-#else
-#define pxa3xx_get_clk_frequency_khz(x)		(0)
-#endif
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index 49dd618b10f7..72b08a9bf0fd 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -28,7 +28,6 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <linux/sizes.h>
 
diff --git a/arch/arm/mach-pxa/gumstix.h b/arch/arm/mach-pxa/gumstix.h
index 470250cdee16..9005b3c0aabd 100644
--- a/arch/arm/mach-pxa/gumstix.h
+++ b/arch/arm/mach-pxa/gumstix.h
@@ -3,7 +3,7 @@
  *  arch/arm/mach-pxa/include/mach/gumstix.h
  */
 
-#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
 
 /* BTRESET - Reset line to Bluetooth module, active low signal. */
 #define GPIO_GUMSTIX_BTRESET          7
diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c
index ece1e71c90a9..212efe24aedb 100644
--- a/arch/arm/mach-pxa/h5000.c
+++ b/arch/arm/mach-pxa/h5000.c
@@ -29,7 +29,7 @@
 #include "pxa25x.h"
 #include "h5000.h"
 #include "udc.h"
-#include <mach/smemc.h>
+#include "smemc.h"
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/hx4700-pcmcia.c b/arch/arm/mach-pxa/hx4700-pcmcia.c
new file mode 100644
index 000000000000..e2331dfe427d
--- /dev/null
+++ b/arch/arm/mach-pxa/hx4700-pcmcia.c
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright (C) 2012 Paul Parsons <lost.distance@yahoo.com>
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+
+#include <asm/mach-types.h>
+#include "hx4700.h"
+
+#include <pcmcia/soc_common.h>
+
+static struct gpio gpios[] = {
+	{ GPIO114_HX4700_CF_RESET,    GPIOF_OUT_INIT_LOW,   "CF reset"        },
+	{ EGPIO4_CF_3V3_ON,           GPIOF_OUT_INIT_LOW,   "CF 3.3V enable"  },
+};
+
+static int hx4700_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+	int ret;
+
+	ret = gpio_request_array(gpios, ARRAY_SIZE(gpios));
+	if (ret)
+		goto out;
+
+	/*
+	 * IRQ type must be set before soc_pcmcia_hw_init() calls request_irq().
+	 * The asic3 default IRQ type is level trigger low level detect, exactly
+	 * the the signal present on GPIOD4_CF_nCD when a CF card is inserted.
+	 * If the IRQ type is not changed, the asic3 interrupt handler will loop
+	 * repeatedly because it is unable to clear the level trigger interrupt.
+	 */
+	irq_set_irq_type(gpio_to_irq(GPIOD4_CF_nCD), IRQ_TYPE_EDGE_BOTH);
+
+	skt->stat[SOC_STAT_CD].gpio = GPIOD4_CF_nCD;
+	skt->stat[SOC_STAT_CD].name = "PCMCIA CD";
+	skt->stat[SOC_STAT_RDY].gpio = GPIO60_HX4700_CF_RNB;
+	skt->stat[SOC_STAT_RDY].name = "PCMCIA Ready";
+
+out:
+	return ret;
+}
+
+static void hx4700_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
+{
+	gpio_free_array(gpios, ARRAY_SIZE(gpios));
+}
+
+static void hx4700_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+	struct pcmcia_state *state)
+{
+	state->vs_3v = 1;
+	state->vs_Xv = 0;
+}
+
+static int hx4700_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+	const socket_state_t *state)
+{
+	switch (state->Vcc) {
+	case 0:
+		gpio_set_value(EGPIO4_CF_3V3_ON, 0);
+		break;
+	case 33:
+		gpio_set_value(EGPIO4_CF_3V3_ON, 1);
+		break;
+	default:
+		printk(KERN_ERR "pcmcia: Unsupported Vcc: %d\n", state->Vcc);
+		return -EINVAL;
+	}
+
+	gpio_set_value(GPIO114_HX4700_CF_RESET, (state->flags & SS_RESET) != 0);
+
+	return 0;
+}
+
+static struct pcmcia_low_level hx4700_pcmcia_ops = {
+	.owner          = THIS_MODULE,
+	.nr             = 1,
+	.hw_init        = hx4700_pcmcia_hw_init,
+	.hw_shutdown    = hx4700_pcmcia_hw_shutdown,
+	.socket_state   = hx4700_pcmcia_socket_state,
+	.configure_socket = hx4700_pcmcia_configure_socket,
+};
+
+static struct platform_device *hx4700_pcmcia_device;
+
+static int __init hx4700_pcmcia_init(void)
+{
+	struct platform_device *pdev;
+
+	if (!machine_is_h4700())
+		return -ENODEV;
+
+	pdev = platform_device_register_data(NULL, "pxa2xx-pcmcia", -1,
+		&hx4700_pcmcia_ops, sizeof(hx4700_pcmcia_ops));
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
+
+	hx4700_pcmcia_device = pdev;
+
+	return 0;
+}
+
+static void __exit hx4700_pcmcia_exit(void)
+{
+	platform_device_unregister(hx4700_pcmcia_device);
+}
+
+module_init(hx4700_pcmcia_init);
+module_exit(hx4700_pcmcia_exit);
+
+MODULE_AUTHOR("Paul Parsons <lost.distance@yahoo.com>");
+MODULE_DESCRIPTION("HP iPAQ hx4700 PCMCIA driver");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 1d4c5db54be2..2fd665944103 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -36,12 +36,12 @@
 #include <linux/spi/pxa2xx_spi.h>
 #include <linux/platform_data/i2c-pxa.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
 #include "pxa27x.h"
-#include <mach/hx4700.h>
+#include "addr-map.h"
+#include "hx4700.h"
 #include <linux/platform_data/irda-pxaficp.h>
 
 #include <sound/ak4641.h>
@@ -616,7 +616,6 @@ static struct pxa2xx_spi_chip tsc2046_chip = {
 	.tx_threshold = 1,
 	.rx_threshold = 2,
 	.timeout      = 64,
-	.gpio_cs      = GPIO88_HX4700_TSC2046_CS,
 };
 
 static struct spi_board_info tsc2046_board_info[] __initdata = {
@@ -635,6 +634,14 @@ static struct pxa2xx_spi_controller pxa_ssp2_master_info = {
 	.enable_dma     = 1,
 };
 
+static struct gpiod_lookup_table pxa_ssp2_gpio_table = {
+	.dev_id = "spi2",
+	.table = {
+		GPIO_LOOKUP_IDX("gpio-pxa", GPIO88_HX4700_TSC2046_CS, "cs", 0, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 /*
  * External power
  */
@@ -827,6 +834,19 @@ static struct i2c_board_info i2c_board_info[] __initdata = {
 	},
 };
 
+static struct gpiod_lookup_table hx4700_audio_gpio_table = {
+	.dev_id = "hx4700-audio",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", GPIO75_HX4700_EARPHONE_nDET,
+			    "earphone-det", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("gpio-pxa", GPIO92_HX4700_HP_DRIVER,
+			    "hp-driver", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-pxa", GPIO107_HX4700_SPK_nSD,
+			    "spk-sd", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static struct platform_device audio = {
 	.name	= "hx4700-audio",
 	.id	= -1,
@@ -888,6 +908,7 @@ static void __init hx4700_init(void)
 
 	gpiod_add_lookup_table(&bq24022_gpiod_table);
 	gpiod_add_lookup_table(&gpio_vbus_gpiod_table);
+	gpiod_add_lookup_table(&hx4700_audio_gpio_table);
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	pwm_add_table(hx4700_pwm_lookup, ARRAY_SIZE(hx4700_pwm_lookup));
 
@@ -896,6 +917,7 @@ static void __init hx4700_init(void)
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(i2c_board_info));
 	i2c_register_board_info(1, ARRAY_AND_SIZE(pi2c_board_info));
+	gpiod_add_lookup_table(&pxa_ssp2_gpio_table);
 	pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
 	spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info));
 
diff --git a/arch/arm/mach-pxa/include/mach/hx4700.h b/arch/arm/mach-pxa/hx4700.h
index 0c30e6d9c660..0c30e6d9c660 100644
--- a/arch/arm/mach-pxa/include/mach/hx4700.h
+++ b/arch/arm/mach-pxa/hx4700.h
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
index 04a12523cdee..624088257cfc 100644
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -13,7 +13,7 @@
 #include <linux/irq.h>
 #include <linux/platform_device.h>
 #include <linux/property.h>
-#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -42,7 +42,6 @@ static struct pxa2xx_spi_chip mcp251x_chip_info1 = {
 	.rx_threshold   = 128,
 	.dma_burst_size = 8,
 	.timeout        = 235,
-	.gpio_cs        = ICONTROL_MCP251x_nCS1
 };
 
 static struct pxa2xx_spi_chip mcp251x_chip_info2 = {
@@ -50,7 +49,6 @@ static struct pxa2xx_spi_chip mcp251x_chip_info2 = {
 	.rx_threshold   = 128,
 	.dma_burst_size = 8,
 	.timeout        = 235,
-	.gpio_cs        = ICONTROL_MCP251x_nCS2
 };
 
 static struct pxa2xx_spi_chip mcp251x_chip_info3 = {
@@ -58,7 +56,6 @@ static struct pxa2xx_spi_chip mcp251x_chip_info3 = {
 	.rx_threshold   = 128,
 	.dma_burst_size = 8,
 	.timeout        = 235,
-	.gpio_cs        = ICONTROL_MCP251x_nCS3
 };
 
 static struct pxa2xx_spi_chip mcp251x_chip_info4 = {
@@ -66,7 +63,6 @@ static struct pxa2xx_spi_chip mcp251x_chip_info4 = {
 	.rx_threshold   = 128,
 	.dma_burst_size = 8,
 	.timeout        = 235,
-	.gpio_cs        = ICONTROL_MCP251x_nCS4
 };
 
 static const struct property_entry mcp251x_properties[] = {
@@ -143,6 +139,24 @@ struct platform_device pxa_spi_ssp4 = {
 	}
 };
 
+static struct gpiod_lookup_table pxa_ssp3_gpio_table = {
+	.dev_id = "spi3",
+	.table = {
+		GPIO_LOOKUP_IDX("gpio-pxa", ICONTROL_MCP251x_nCS1, "cs", 0, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("gpio-pxa", ICONTROL_MCP251x_nCS2, "cs", 1, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table pxa_ssp4_gpio_table = {
+	.dev_id = "spi4",
+	.table = {
+		GPIO_LOOKUP_IDX("gpio-pxa", ICONTROL_MCP251x_nCS3, "cs", 0, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("gpio-pxa", ICONTROL_MCP251x_nCS4, "cs", 1, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static struct platform_device *icontrol_spi_devices[] __initdata = {
 	&pxa_spi_ssp3,
 	&pxa_spi_ssp4,
@@ -175,6 +189,8 @@ static mfp_cfg_t mfp_can_cfg[] __initdata = {
 static void __init icontrol_can_init(void)
 {
 	pxa3xx_mfp_config(ARRAY_AND_SIZE(mfp_can_cfg));
+	gpiod_add_lookup_table(&pxa_ssp3_gpio_table);
+	gpiod_add_lookup_table(&pxa_ssp4_gpio_table);
 	platform_add_devices(ARRAY_AND_SIZE(icontrol_spi_devices));
 	spi_register_board_info(ARRAY_AND_SIZE(mcp251x_board_info));
 }
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index fb0850af8496..525d01ddfbbb 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -22,7 +22,6 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <mach/hardware.h>
 #include <asm/irq.h>
 
 #include <asm/mach/arch.h>
@@ -31,7 +30,6 @@
 #include "pxa25x.h"
 #include "idp.h"
 #include <linux/platform_data/video-pxafb.h>
-#include <mach/bitfield.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/smc91x.h>
 
diff --git a/arch/arm/mach-pxa/idp.h b/arch/arm/mach-pxa/idp.h
index a89e6723b1a1..81b9bd9ba754 100644
--- a/arch/arm/mach-pxa/idp.h
+++ b/arch/arm/mach-pxa/idp.h
@@ -20,7 +20,7 @@
  * IDP hardware.
  */
 
-#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
 
 #define IDP_FLASH_PHYS		(PXA_CS0_PHYS)
 #define IDP_ALT_FLASH_PHYS	(PXA_CS1_PHYS)
diff --git a/arch/arm/mach-pxa/include/mach/audio.h b/arch/arm/mach-pxa/include/mach/audio.h
deleted file mode 100644
index 7beebf7297b5..000000000000
--- a/arch/arm/mach-pxa/include/mach/audio.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_ARCH_AUDIO_H__
-#define __ASM_ARCH_AUDIO_H__
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/ac97_codec.h>
-
-/*
- * @reset_gpio: AC97 reset gpio (normally gpio113 or gpio95)
- *              a -1 value means no gpio will be used for reset
- * @codec_pdata: AC97 codec platform_data
-
- * reset_gpio should only be specified for pxa27x CPUs where a silicon
- * bug prevents correct operation of the reset line. If not specified,
- * the default behaviour on these CPUs is to consider gpio 113 as the
- * AC97 reset line, which is the default on most boards.
- */
-typedef struct {
-	int (*startup)(struct snd_pcm_substream *, void *);
-	void (*shutdown)(struct snd_pcm_substream *, void *);
-	void (*suspend)(void *);
-	void (*resume)(void *);
-	void *priv;
-	int reset_gpio;
-	void *codec_pdata[AC97_BUS_MAX_DEVICES];
-} pxa2xx_audio_ops_t;
-
-extern void pxa_set_ac97_info(pxa2xx_audio_ops_t *ops);
-
-#endif
diff --git a/arch/arm/mach-pxa/include/mach/bitfield.h b/arch/arm/mach-pxa/include/mach/bitfield.h
deleted file mode 100644
index fe2ca441bc0a..000000000000
--- a/arch/arm/mach-pxa/include/mach/bitfield.h
+++ /dev/null
@@ -1,114 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- *	FILE    	bitfield.h
- *
- *	Version 	1.1
- *	Author  	Copyright (c) Marc A. Viredaz, 1998
- *	        	DEC Western Research Laboratory, Palo Alto, CA
- *	Date    	April 1998 (April 1997)
- *	System  	Advanced RISC Machine (ARM)
- *	Language	C or ARM Assembly
- *	Purpose 	Definition of macros to operate on bit fields.
- */
-
-
-
-#ifndef __BITFIELD_H
-#define __BITFIELD_H
-
-#ifndef __ASSEMBLY__
-#define UData(Data)	((unsigned long) (Data))
-#else
-#define UData(Data)	(Data)
-#endif
-
-
-/*
- * MACRO: Fld
- *
- * Purpose
- *    The macro "Fld" encodes a bit field, given its size and its shift value
- *    with respect to bit 0.
- *
- * Note
- *    A more intuitive way to encode bit fields would have been to use their
- *    mask. However, extracting size and shift value information from a bit
- *    field's mask is cumbersome and might break the assembler (255-character
- *    line-size limit).
- *
- * Input
- *    Size      	Size of the bit field, in number of bits.
- *    Shft      	Shift value of the bit field with respect to bit 0.
- *
- * Output
- *    Fld       	Encoded bit field.
- */
-
-#define Fld(Size, Shft)	(((Size) << 16) + (Shft))
-
-
-/*
- * MACROS: FSize, FShft, FMsk, FAlnMsk, F1stBit
- *
- * Purpose
- *    The macros "FSize", "FShft", "FMsk", "FAlnMsk", and "F1stBit" return
- *    the size, shift value, mask, aligned mask, and first bit of a
- *    bit field.
- *
- * Input
- *    Field     	Encoded bit field (using the macro "Fld").
- *
- * Output
- *    FSize     	Size of the bit field, in number of bits.
- *    FShft     	Shift value of the bit field with respect to bit 0.
- *    FMsk      	Mask for the bit field.
- *    FAlnMsk   	Mask for the bit field, aligned on bit 0.
- *    F1stBit   	First bit of the bit field.
- */
-
-#define FSize(Field)	((Field) >> 16)
-#define FShft(Field)	((Field) & 0x0000FFFF)
-#define FMsk(Field)	(((UData (1) << FSize (Field)) - 1) << FShft (Field))
-#define FAlnMsk(Field)	((UData (1) << FSize (Field)) - 1)
-#define F1stBit(Field)	(UData (1) << FShft (Field))
-
-
-/*
- * MACRO: FInsrt
- *
- * Purpose
- *    The macro "FInsrt" inserts a value into a bit field by shifting the
- *    former appropriately.
- *
- * Input
- *    Value     	Bit-field value.
- *    Field     	Encoded bit field (using the macro "Fld").
- *
- * Output
- *    FInsrt    	Bit-field value positioned appropriately.
- */
-
-#define FInsrt(Value, Field) \
-                	(UData (Value) << FShft (Field))
-
-
-/*
- * MACRO: FExtr
- *
- * Purpose
- *    The macro "FExtr" extracts the value of a bit field by masking and
- *    shifting it appropriately.
- *
- * Input
- *    Data      	Data containing the bit-field to be extracted.
- *    Field     	Encoded bit field (using the macro "Fld").
- *
- * Output
- *    FExtr     	Bit-field value.
- */
-
-#define FExtr(Data, Field) \
-                	((UData (Data) >> FShft (Field)) & FAlnMsk (Field))
-
-
-#endif /* __BITFIELD_H */
diff --git a/arch/arm/mach-pxa/include/mach/dma.h b/arch/arm/mach-pxa/include/mach/dma.h
deleted file mode 100644
index 79f9842a7e1c..000000000000
--- a/arch/arm/mach-pxa/include/mach/dma.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  arch/arm/mach-pxa/include/mach/dma.h
- *
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software, Inc.
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#include <mach/hardware.h>
-
-/* DMA Controller Registers Definitions */
-#define DMAC_REGS_VIRT	io_p2v(0x40000000)
-
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-pxa/include/mach/generic.h b/arch/arm/mach-pxa/include/mach/generic.h
deleted file mode 100644
index 665542e0c9e2..000000000000
--- a/arch/arm/mach-pxa/include/mach/generic.h
+++ /dev/null
@@ -1 +0,0 @@
-#include "../../generic.h"
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
deleted file mode 100644
index ee7eab16135f..000000000000
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ /dev/null
@@ -1,305 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  arch/arm/mach-pxa/include/mach/hardware.h
- *
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <mach/addr-map.h>
-
-/*
- * Workarounds for at least 2 errata so far require this.
- * The mapping is set in mach-pxa/generic.c.
- */
-#define UNCACHED_PHYS_0		0xfe000000
-#define UNCACHED_PHYS_0_SIZE	0x00100000
-
-/*
- * Intel PXA2xx internal register mapping:
- *
- * 0x40000000 - 0x41ffffff <--> 0xf2000000 - 0xf3ffffff
- * 0x44000000 - 0x45ffffff <--> 0xf4000000 - 0xf5ffffff
- * 0x48000000 - 0x49ffffff <--> 0xf6000000 - 0xf7ffffff
- * 0x4c000000 - 0x4dffffff <--> 0xf8000000 - 0xf9ffffff
- * 0x50000000 - 0x51ffffff <--> 0xfa000000 - 0xfbffffff
- * 0x54000000 - 0x55ffffff <--> 0xfc000000 - 0xfdffffff
- * 0x58000000 - 0x59ffffff <--> 0xfe000000 - 0xffffffff
- *
- * Note that not all PXA2xx chips implement all those addresses, and the
- * kernel only maps the minimum needed range of this mapping.
- */
-#define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1))
-#define io_p2v(x) IOMEM(0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1))
-
-#ifndef __ASSEMBLY__
-# define __REG(x)	(*((volatile u32 __iomem *)io_p2v(x)))
-
-/* With indexed regs we don't want to feed the index through io_p2v()
-   especially if it is a variable, otherwise horrible code will result. */
-# define __REG2(x,y)	\
-	(*(volatile u32 __iomem*)((u32)&__REG(x) + (y)))
-
-# define __PREG(x)	(io_v2p((u32)&(x)))
-
-#else
-
-# define __REG(x)	io_p2v(x)
-# define __PREG(x)	io_v2p(x)
-
-#endif
-
-#ifndef __ASSEMBLY__
-
-#include <asm/cputype.h>
-
-/*
- *   CPU     Stepping     CPU_ID         JTAG_ID
- *
- *  PXA210	B0	0x69052922	0x2926C013
- *  PXA210	B1	0x69052923	0x3926C013
- *  PXA210	B2	0x69052924	0x4926C013
- *  PXA210	C0	0x69052D25	0x5926C013
- *
- *  PXA250	A0	0x69052100	0x09264013
- *  PXA250	A1	0x69052101	0x19264013
- *  PXA250	B0	0x69052902	0x29264013
- *  PXA250	B1	0x69052903	0x39264013
- *  PXA250	B2	0x69052904	0x49264013
- *  PXA250	C0	0x69052D05	0x59264013
- *
- *  PXA255	A0	0x69052D06	0x69264013
- *
- *  PXA26x	A0	0x69052903	0x39264013
- *  PXA26x	B0	0x69052D05	0x59264013
- *
- *  PXA27x	A0	0x69054110	0x09265013
- *  PXA27x	A1	0x69054111	0x19265013
- *  PXA27x	B0	0x69054112	0x29265013
- *  PXA27x	B1	0x69054113	0x39265013
- *  PXA27x	C0	0x69054114	0x49265013
- *  PXA27x	C5	0x69054117	0x79265013
- *
- *  PXA30x	A0	0x69056880	0x0E648013
- *  PXA30x	A1	0x69056881	0x1E648013
- *  PXA31x	A0	0x69056890	0x0E649013
- *  PXA31x	A1	0x69056891	0x1E649013
- *  PXA31x	A2	0x69056892	0x2E649013
- *  PXA32x	B1	0x69056825	0x5E642013
- *  PXA32x	B2	0x69056826	0x6E642013
- *
- *  PXA930	B0	0x69056835	0x5E643013
- *  PXA930	B1	0x69056837	0x7E643013
- *  PXA930	B2	0x69056838	0x8E643013
- *
- *  PXA935	A0	0x56056931	0x1E653013
- *  PXA935	B0	0x56056936	0x6E653013
- *  PXA935	B1	0x56056938	0x8E653013
- */
-#ifdef CONFIG_PXA25x
-#define __cpu_is_pxa210(id)				\
-	({						\
-		unsigned int _id = (id) & 0xf3f0;	\
-		_id == 0x2120;				\
-	})
-
-#define __cpu_is_pxa250(id)				\
-	({						\
-		unsigned int _id = (id) & 0xf3ff;	\
-		_id <= 0x2105;				\
-	})
-
-#define __cpu_is_pxa255(id)				\
-	({						\
-		unsigned int _id = (id) & 0xffff;	\
-		_id == 0x2d06;				\
-	})
-
-#define __cpu_is_pxa25x(id)				\
-	({						\
-		unsigned int _id = (id) & 0xf300;	\
-		_id == 0x2100;				\
-	})
-#else
-#define __cpu_is_pxa210(id)	(0)
-#define __cpu_is_pxa250(id)	(0)
-#define __cpu_is_pxa255(id)	(0)
-#define __cpu_is_pxa25x(id)	(0)
-#endif
-
-#ifdef CONFIG_PXA27x
-#define __cpu_is_pxa27x(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x411;				\
-	})
-#else
-#define __cpu_is_pxa27x(id)	(0)
-#endif
-
-#ifdef CONFIG_CPU_PXA300
-#define __cpu_is_pxa300(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x688;				\
-	 })
-#else
-#define __cpu_is_pxa300(id)	(0)
-#endif
-
-#ifdef CONFIG_CPU_PXA310
-#define __cpu_is_pxa310(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x689;				\
-	 })
-#else
-#define __cpu_is_pxa310(id)	(0)
-#endif
-
-#ifdef CONFIG_CPU_PXA320
-#define __cpu_is_pxa320(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x603 || _id == 0x682;		\
-	 })
-#else
-#define __cpu_is_pxa320(id)	(0)
-#endif
-
-#ifdef CONFIG_CPU_PXA930
-#define __cpu_is_pxa930(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x683;				\
-	 })
-#else
-#define __cpu_is_pxa930(id)	(0)
-#endif
-
-#ifdef CONFIG_CPU_PXA935
-#define __cpu_is_pxa935(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x693;				\
-	 })
-#else
-#define __cpu_is_pxa935(id)	(0)
-#endif
-
-#define cpu_is_pxa210()					\
-	({						\
-		__cpu_is_pxa210(read_cpuid_id());	\
-	})
-
-#define cpu_is_pxa250()					\
-	({						\
-		__cpu_is_pxa250(read_cpuid_id());	\
-	})
-
-#define cpu_is_pxa255()                                 \
-	({                                              \
-		__cpu_is_pxa255(read_cpuid_id());       \
-	})
-
-#define cpu_is_pxa25x()					\
-	({						\
-		__cpu_is_pxa25x(read_cpuid_id());	\
-	})
-
-#define cpu_is_pxa27x()					\
-	({						\
-		__cpu_is_pxa27x(read_cpuid_id());	\
-	})
-
-#define cpu_is_pxa300()					\
-	({						\
-		__cpu_is_pxa300(read_cpuid_id());	\
-	 })
-
-#define cpu_is_pxa310()					\
-	({						\
-		__cpu_is_pxa310(read_cpuid_id());	\
-	 })
-
-#define cpu_is_pxa320()					\
-	({						\
-		__cpu_is_pxa320(read_cpuid_id());	\
-	 })
-
-#define cpu_is_pxa930()					\
-	({						\
-		__cpu_is_pxa930(read_cpuid_id());	\
-	 })
-
-#define cpu_is_pxa935()					\
-	({						\
-		__cpu_is_pxa935(read_cpuid_id());	\
-	 })
-
-
-
-/*
- * CPUID Core Generation Bit
- * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x
- */
-#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
-#define __cpu_is_pxa2xx(id)				\
-	({						\
-		unsigned int _id = (id) >> 13 & 0x7;	\
-		_id <= 0x2;				\
-	 })
-#else
-#define __cpu_is_pxa2xx(id)	(0)
-#endif
-
-#ifdef CONFIG_PXA3xx
-#define __cpu_is_pxa3xx(id)				\
-	({						\
-		__cpu_is_pxa300(id)			\
-			|| __cpu_is_pxa310(id)		\
-			|| __cpu_is_pxa320(id)		\
-			|| __cpu_is_pxa93x(id);		\
-	 })
-#else
-#define __cpu_is_pxa3xx(id)	(0)
-#endif
-
-#if defined(CONFIG_CPU_PXA930) || defined(CONFIG_CPU_PXA935)
-#define __cpu_is_pxa93x(id)				\
-	({						\
-		__cpu_is_pxa930(id)			\
-			|| __cpu_is_pxa935(id);		\
-	 })
-#else
-#define __cpu_is_pxa93x(id)	(0)
-#endif
-
-#define cpu_is_pxa2xx()					\
-	({						\
-		__cpu_is_pxa2xx(read_cpuid_id());	\
-	 })
-
-#define cpu_is_pxa3xx()					\
-	({						\
-		__cpu_is_pxa3xx(read_cpuid_id());	\
-	 })
-
-#define cpu_is_pxa93x()					\
-	({						\
-		__cpu_is_pxa93x(read_cpuid_id());	\
-	 })
-
-
-/*
- * return current memory and LCD clock frequency in units of 10kHz
- */
-extern unsigned int get_memclk_frequency_10khz(void);
-
-#endif
-
-#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-pxa/include/mach/mtd-xip.h b/arch/arm/mach-pxa/include/mach/mtd-xip.h
deleted file mode 100644
index 4b31bef9e50a..000000000000
--- a/arch/arm/mach-pxa/include/mach/mtd-xip.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * MTD primitives for XIP support. Architecture specific functions
- *
- * Do not include this file directly. It's included from linux/mtd/xip.h
- * 
- * Author:	Nicolas Pitre
- * Created:	Nov 2, 2004
- * Copyright:	(C) 2004 MontaVista Software, Inc.
- */
-
-#ifndef __ARCH_PXA_MTD_XIP_H__
-#define __ARCH_PXA_MTD_XIP_H__
-
-#include <mach/regs-ost.h>
-
-/* restored July 2017, this did not build since 2011! */
-
-#define ICIP			io_p2v(0x40d00000)
-#define ICMR			io_p2v(0x40d00004)
-#define xip_irqpending()	(readl(ICIP) & readl(ICMR))
-
-/* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */
-#define xip_currtime()		readl(OSCR)
-#define xip_elapsed_since(x)	(signed)((readl(OSCR) - (x)) / 4)
-
-/*
- * xip_cpu_idle() is used when waiting for a delay equal or larger than
- * the system timer tick period.  This should put the CPU into idle mode
- * to save power and to be woken up only when some interrupts are pending.
- * As above, this should not rely upon standard kernel code.
- */
-
-#define xip_cpu_idle()  asm volatile ("mcr p14, 0, %0, c7, c0, 0" :: "r" (1))
-
-#endif /* __ARCH_PXA_MTD_XIP_H__ */
diff --git a/arch/arm/mach-pxa/include/mach/regs-ac97.h b/arch/arm/mach-pxa/include/mach/regs-ac97.h
deleted file mode 100644
index 1db96fd4df32..000000000000
--- a/arch/arm/mach-pxa/include/mach/regs-ac97.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_ARCH_REGS_AC97_H
-#define __ASM_ARCH_REGS_AC97_H
-
-#include <mach/hardware.h>
-
-/*
- * AC97 Controller registers
- */
-
-#define POCR		__REG(0x40500000)  /* PCM Out Control Register */
-#define POCR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
-#define POCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
-
-#define PICR		__REG(0x40500004)  /* PCM In Control Register */
-#define PICR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
-#define PICR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
-
-#define MCCR		__REG(0x40500008)  /* Mic In Control Register */
-#define MCCR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
-#define MCCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
-
-#define GCR		__REG(0x4050000C)  /* Global Control Register */
-#ifdef CONFIG_PXA3xx
-#define GCR_CLKBPB	(1 << 31)	/* Internal clock enable */
-#endif
-#define GCR_nDMAEN	(1 << 24)	/* non DMA Enable */
-#define GCR_CDONE_IE	(1 << 19)	/* Command Done Interrupt Enable */
-#define GCR_SDONE_IE	(1 << 18)	/* Status Done Interrupt Enable */
-#define GCR_SECRDY_IEN	(1 << 9)	/* Secondary Ready Interrupt Enable */
-#define GCR_PRIRDY_IEN	(1 << 8)	/* Primary Ready Interrupt Enable */
-#define GCR_SECRES_IEN	(1 << 5)	/* Secondary Resume Interrupt Enable */
-#define GCR_PRIRES_IEN	(1 << 4)	/* Primary Resume Interrupt Enable */
-#define GCR_ACLINK_OFF	(1 << 3)	/* AC-link Shut Off */
-#define GCR_WARM_RST	(1 << 2)	/* AC97 Warm Reset */
-#define GCR_COLD_RST	(1 << 1)	/* AC'97 Cold Reset (0 = active) */
-#define GCR_GIE		(1 << 0)	/* Codec GPI Interrupt Enable */
-
-#define POSR		__REG(0x40500010)  /* PCM Out Status Register */
-#define POSR_FIFOE	(1 << 4)	/* FIFO error */
-#define POSR_FSR	(1 << 2)	/* FIFO Service Request */
-
-#define PISR		__REG(0x40500014)  /* PCM In Status Register */
-#define PISR_FIFOE	(1 << 4)	/* FIFO error */
-#define PISR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
-#define PISR_FSR	(1 << 2)	/* FIFO Service Request */
-
-#define MCSR		__REG(0x40500018)  /* Mic In Status Register */
-#define MCSR_FIFOE	(1 << 4)	/* FIFO error */
-#define MCSR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
-#define MCSR_FSR	(1 << 2)	/* FIFO Service Request */
-
-#define GSR		__REG(0x4050001C)  /* Global Status Register */
-#define GSR_CDONE	(1 << 19)	/* Command Done */
-#define GSR_SDONE	(1 << 18)	/* Status Done */
-#define GSR_RDCS	(1 << 15)	/* Read Completion Status */
-#define GSR_BIT3SLT12	(1 << 14)	/* Bit 3 of slot 12 */
-#define GSR_BIT2SLT12	(1 << 13)	/* Bit 2 of slot 12 */
-#define GSR_BIT1SLT12	(1 << 12)	/* Bit 1 of slot 12 */
-#define GSR_SECRES	(1 << 11)	/* Secondary Resume Interrupt */
-#define GSR_PRIRES	(1 << 10)	/* Primary Resume Interrupt */
-#define GSR_SCR		(1 << 9)	/* Secondary Codec Ready */
-#define GSR_PCR		(1 << 8)	/*  Primary Codec Ready */
-#define GSR_MCINT	(1 << 7)	/* Mic In Interrupt */
-#define GSR_POINT	(1 << 6)	/* PCM Out Interrupt */
-#define GSR_PIINT	(1 << 5)	/* PCM In Interrupt */
-#define GSR_ACOFFD	(1 << 3)	/* AC-link Shut Off Done */
-#define GSR_MOINT	(1 << 2)	/* Modem Out Interrupt */
-#define GSR_MIINT	(1 << 1)	/* Modem In Interrupt */
-#define GSR_GSCI	(1 << 0)	/* Codec GPI Status Change Interrupt */
-
-#define CAR		__REG(0x40500020)  /* CODEC Access Register */
-#define CAR_CAIP	(1 << 0)	/* Codec Access In Progress */
-
-#define PCDR		__REG(0x40500040)  /* PCM FIFO Data Register */
-#define MCDR		__REG(0x40500060)  /* Mic-in FIFO Data Register */
-
-#define MOCR		__REG(0x40500100)  /* Modem Out Control Register */
-#define MOCR_FEIE	(1 << 3)	/* FIFO Error */
-#define MOCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
-
-#define MICR		__REG(0x40500108)  /* Modem In Control Register */
-#define MICR_FEIE	(1 << 3)	/* FIFO Error */
-#define MICR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
-
-#define MOSR		__REG(0x40500110)  /* Modem Out Status Register */
-#define MOSR_FIFOE	(1 << 4)	/* FIFO error */
-#define MOSR_FSR	(1 << 2)	/* FIFO Service Request */
-
-#define MISR		__REG(0x40500118)  /* Modem In Status Register */
-#define MISR_FIFOE	(1 << 4)	/* FIFO error */
-#define MISR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
-#define MISR_FSR	(1 << 2)	/* FIFO Service Request */
-
-#define MODR		__REG(0x40500140)  /* Modem FIFO Data Register */
-
-#define PAC_REG_BASE	__REG(0x40500200)  /* Primary Audio Codec */
-#define SAC_REG_BASE	__REG(0x40500300)  /* Secondary Audio Codec */
-#define PMC_REG_BASE	__REG(0x40500400)  /* Primary Modem Codec */
-#define SMC_REG_BASE	__REG(0x40500500)  /* Secondary Modem Codec */
-
-#endif /* __ASM_ARCH_REGS_AC97_H */
diff --git a/arch/arm/mach-pxa/include/mach/regs-lcd.h b/arch/arm/mach-pxa/include/mach/regs-lcd.h
deleted file mode 100644
index e2b6e3d1f625..000000000000
--- a/arch/arm/mach-pxa/include/mach/regs-lcd.h
+++ /dev/null
@@ -1,198 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_ARCH_REGS_LCD_H
-#define __ASM_ARCH_REGS_LCD_H
-
-#include <mach/bitfield.h>
-
-/*
- * LCD Controller Registers and Bits Definitions
- */
-#define LCCR0		(0x000)	/* LCD Controller Control Register 0 */
-#define LCCR1		(0x004)	/* LCD Controller Control Register 1 */
-#define LCCR2		(0x008)	/* LCD Controller Control Register 2 */
-#define LCCR3		(0x00C)	/* LCD Controller Control Register 3 */
-#define LCCR4		(0x010)	/* LCD Controller Control Register 4 */
-#define LCCR5		(0x014)	/* LCD Controller Control Register 5 */
-#define LCSR		(0x038)	/* LCD Controller Status Register 0 */
-#define LCSR1		(0x034)	/* LCD Controller Status Register 1 */
-#define LIIDR		(0x03C)	/* LCD Controller Interrupt ID Register */
-#define TMEDRGBR	(0x040)	/* TMED RGB Seed Register */
-#define TMEDCR		(0x044)	/* TMED Control Register */
-
-#define FBR0		(0x020)	/* DMA Channel 0 Frame Branch Register */
-#define FBR1		(0x024)	/* DMA Channel 1 Frame Branch Register */
-#define FBR2		(0x028) /* DMA Channel 2 Frame Branch Register */
-#define FBR3		(0x02C) /* DMA Channel 2 Frame Branch Register */
-#define FBR4		(0x030) /* DMA Channel 2 Frame Branch Register */
-#define FBR5		(0x110) /* DMA Channel 2 Frame Branch Register */
-#define FBR6		(0x114) /* DMA Channel 2 Frame Branch Register */
-
-#define OVL1C1		(0x050)	/* Overlay 1 Control Register 1 */
-#define OVL1C2		(0x060)	/* Overlay 1 Control Register 2 */
-#define OVL2C1		(0x070)	/* Overlay 2 Control Register 1 */
-#define OVL2C2		(0x080)	/* Overlay 2 Control Register 2 */
-
-#define CMDCR		(0x100)	/* Command Control Register */
-#define PRSR		(0x104)	/* Panel Read Status Register */
-
-#define LCCR3_BPP(x)	((((x) & 0x7) << 24) | (((x) & 0x8) ? (1 << 29) : 0))
-
-#define LCCR3_PDFOR_0	(0 << 30)
-#define LCCR3_PDFOR_1	(1 << 30)
-#define LCCR3_PDFOR_2	(2 << 30)
-#define LCCR3_PDFOR_3	(3 << 30)
-
-#define LCCR4_PAL_FOR_0	(0 << 15)
-#define LCCR4_PAL_FOR_1	(1 << 15)
-#define LCCR4_PAL_FOR_2	(2 << 15)
-#define LCCR4_PAL_FOR_3	(3 << 15)
-#define LCCR4_PAL_FOR_MASK	(3 << 15)
-
-#define FDADR0		(0x200)	/* DMA Channel 0 Frame Descriptor Address Register */
-#define FDADR1		(0x210)	/* DMA Channel 1 Frame Descriptor Address Register */
-#define FDADR2		(0x220)	/* DMA Channel 2 Frame Descriptor Address Register */
-#define FDADR3		(0x230)	/* DMA Channel 3 Frame Descriptor Address Register */
-#define FDADR4		(0x240)	/* DMA Channel 4 Frame Descriptor Address Register */
-#define FDADR5		(0x250)	/* DMA Channel 5 Frame Descriptor Address Register */
-#define FDADR6		(0x260) /* DMA Channel 6 Frame Descriptor Address Register */
-
-#define LCCR0_ENB	(1 << 0)	/* LCD Controller enable */
-#define LCCR0_CMS	(1 << 1)	/* Color/Monochrome Display Select */
-#define LCCR0_Color	(LCCR0_CMS*0)	/*  Color display */
-#define LCCR0_Mono	(LCCR0_CMS*1)	/*  Monochrome display */
-#define LCCR0_SDS	(1 << 2)	/* Single/Dual Panel Display Select */
-#define LCCR0_Sngl	(LCCR0_SDS*0)	/*  Single panel display */
-#define LCCR0_Dual	(LCCR0_SDS*1)	/*  Dual panel display */
-
-#define LCCR0_LDM	(1 << 3)	/* LCD Disable Done Mask */
-#define LCCR0_SFM	(1 << 4)	/* Start of frame mask */
-#define LCCR0_IUM	(1 << 5)	/* Input FIFO underrun mask */
-#define LCCR0_EFM	(1 << 6)	/* End of Frame mask */
-#define LCCR0_PAS	(1 << 7)	/* Passive/Active display Select */
-#define LCCR0_Pas	(LCCR0_PAS*0)	/*  Passive display (STN) */
-#define LCCR0_Act	(LCCR0_PAS*1)	/*  Active display (TFT) */
-#define LCCR0_DPD	(1 << 9)	/* Double Pixel Data (monochrome) */
-#define LCCR0_4PixMono	(LCCR0_DPD*0)	/*  4-Pixel/clock Monochrome display */
-#define LCCR0_8PixMono	(LCCR0_DPD*1)	/*  8-Pixel/clock Monochrome display */
-#define LCCR0_DIS	(1 << 10)	/* LCD Disable */
-#define LCCR0_QDM	(1 << 11)	/* LCD Quick Disable mask */
-#define LCCR0_PDD	(0xff << 12)	/* Palette DMA request delay */
-#define LCCR0_PDD_S	12
-#define LCCR0_BM	(1 << 20)	/* Branch mask */
-#define LCCR0_OUM	(1 << 21)	/* Output FIFO underrun mask */
-#define LCCR0_LCDT	(1 << 22)	/* LCD panel type */
-#define LCCR0_RDSTM	(1 << 23)	/* Read status interrupt mask */
-#define LCCR0_CMDIM	(1 << 24)	/* Command interrupt mask */
-#define LCCR0_OUC	(1 << 25)	/* Overlay Underlay control bit */
-#define LCCR0_LDDALT	(1 << 26)	/* LDD alternate mapping control */
-
-#define LCCR1_PPL	Fld (10, 0)	/* Pixels Per Line - 1 */
-#define LCCR1_DisWdth(Pixel)	(((Pixel) - 1) << FShft (LCCR1_PPL))
-
-#define LCCR1_HSW	Fld (6, 10)	/* Horizontal Synchronization */
-#define LCCR1_HorSnchWdth(Tpix)	(((Tpix) - 1) << FShft (LCCR1_HSW))
-
-#define LCCR1_ELW	Fld (8, 16)	/* End-of-Line pixel clock Wait - 1 */
-#define LCCR1_EndLnDel(Tpix)	(((Tpix) - 1) << FShft (LCCR1_ELW))
-
-#define LCCR1_BLW	Fld (8, 24)	/* Beginning-of-Line pixel clock */
-#define LCCR1_BegLnDel(Tpix)	(((Tpix) - 1) << FShft (LCCR1_BLW))
-
-#define LCCR2_LPP	Fld (10, 0)	/* Line Per Panel - 1 */
-#define LCCR2_DisHght(Line)	(((Line) - 1) << FShft (LCCR2_LPP))
-
-#define LCCR2_VSW	Fld (6, 10)	/* Vertical Synchronization pulse - 1 */
-#define LCCR2_VrtSnchWdth(Tln)	(((Tln) - 1) << FShft (LCCR2_VSW))
-
-#define LCCR2_EFW	Fld (8, 16)	/* End-of-Frame line clock Wait */
-#define LCCR2_EndFrmDel(Tln)	((Tln) << FShft (LCCR2_EFW))
-
-#define LCCR2_BFW	Fld (8, 24)	/* Beginning-of-Frame line clock */
-#define LCCR2_BegFrmDel(Tln)	((Tln) << FShft (LCCR2_BFW))
-
-#define LCCR3_API	(0xf << 16)	/* AC Bias pin trasitions per interrupt */
-#define LCCR3_API_S	16
-#define LCCR3_VSP	(1 << 20)	/* vertical sync polarity */
-#define LCCR3_HSP	(1 << 21)	/* horizontal sync polarity */
-#define LCCR3_PCP	(1 << 22)	/* Pixel Clock Polarity (L_PCLK) */
-#define LCCR3_PixRsEdg	(LCCR3_PCP*0)	/*  Pixel clock Rising-Edge */
-#define LCCR3_PixFlEdg	(LCCR3_PCP*1)	/*  Pixel clock Falling-Edge */
-
-#define LCCR3_OEP	(1 << 23)	/* Output Enable Polarity */
-#define LCCR3_OutEnH	(LCCR3_OEP*0)	/*  Output Enable active High */
-#define LCCR3_OutEnL	(LCCR3_OEP*1)	/*  Output Enable active Low */
-
-#define LCCR3_DPC	(1 << 27)	/* double pixel clock mode */
-#define LCCR3_PCD	Fld (8, 0)	/* Pixel Clock Divisor */
-#define LCCR3_PixClkDiv(Div)	(((Div) << FShft (LCCR3_PCD)))
-
-#define LCCR3_ACB	Fld (8, 8)	/* AC Bias */
-#define LCCR3_Acb(Acb)	(((Acb) << FShft (LCCR3_ACB)))
-
-#define LCCR3_HorSnchH	(LCCR3_HSP*0)	/*  HSP Active High */
-#define LCCR3_HorSnchL	(LCCR3_HSP*1)	/*  HSP Active Low */
-
-#define LCCR3_VrtSnchH	(LCCR3_VSP*0)	/*  VSP Active High */
-#define LCCR3_VrtSnchL	(LCCR3_VSP*1)	/*  VSP Active Low */
-
-#define LCCR5_IUM(x)	(1 << ((x) + 23)) /* input underrun mask */
-#define LCCR5_BSM(x)	(1 << ((x) + 15)) /* branch mask */
-#define LCCR5_EOFM(x)	(1 << ((x) + 7))  /* end of frame mask */
-#define LCCR5_SOFM(x)	(1 << ((x) + 0))  /* start of frame mask */
-
-#define LCSR_LDD	(1 << 0)	/* LCD Disable Done */
-#define LCSR_SOF	(1 << 1)	/* Start of frame */
-#define LCSR_BER	(1 << 2)	/* Bus error */
-#define LCSR_ABC	(1 << 3)	/* AC Bias count */
-#define LCSR_IUL	(1 << 4)	/* input FIFO underrun Lower panel */
-#define LCSR_IUU	(1 << 5)	/* input FIFO underrun Upper panel */
-#define LCSR_OU		(1 << 6)	/* output FIFO underrun */
-#define LCSR_QD		(1 << 7)	/* quick disable */
-#define LCSR_EOF	(1 << 8)	/* end of frame */
-#define LCSR_BS		(1 << 9)	/* branch status */
-#define LCSR_SINT	(1 << 10)	/* subsequent interrupt */
-#define LCSR_RD_ST	(1 << 11)	/* read status */
-#define LCSR_CMD_INT	(1 << 12)	/* command interrupt */
-
-#define LCSR1_IU(x)	(1 << ((x) + 23)) /* Input FIFO underrun */
-#define LCSR1_BS(x)	(1 << ((x) + 15)) /* Branch Status */
-#define LCSR1_EOF(x)	(1 << ((x) + 7))  /* End of Frame Status */
-#define LCSR1_SOF(x)	(1 << ((x) - 1))  /* Start of Frame Status */
-
-#define LDCMD_PAL	(1 << 26)	/* instructs DMA to load palette buffer */
-
-/* overlay control registers */
-#define OVLxC1_PPL(x)	((((x) - 1) & 0x3ff) << 0)	/* Pixels Per Line */
-#define OVLxC1_LPO(x)	((((x) - 1) & 0x3ff) << 10)	/* Number of Lines */
-#define OVLxC1_BPP(x)	(((x) & 0xf) << 20)	/* Bits Per Pixel */
-#define OVLxC1_OEN	(1 << 31)		/* Enable bit for Overlay */
-#define OVLxC2_XPOS(x)	(((x) & 0x3ff) << 0)	/* Horizontal Position */
-#define OVLxC2_YPOS(x)	(((x) & 0x3ff) << 10)	/* Vertical Position */
-#define OVL2C2_PFOR(x)	(((x) & 0x7) << 20)	/* Pixel Format */
-
-/* smartpanel related */
-#define PRSR_DATA(x)	((x) & 0xff)	/* Panel Data */
-#define PRSR_A0		(1 << 8)	/* Read Data Source */
-#define PRSR_ST_OK	(1 << 9)	/* Status OK */
-#define PRSR_CON_NT	(1 << 10)	/* Continue to Next Command */
-
-#define SMART_CMD_A0			 (0x1 << 8)
-#define SMART_CMD_READ_STATUS_REG	 (0x0 << 9)
-#define SMART_CMD_READ_FRAME_BUFFER	((0x0 << 9) | SMART_CMD_A0)
-#define SMART_CMD_WRITE_COMMAND		 (0x1 << 9)
-#define SMART_CMD_WRITE_DATA		((0x1 << 9) | SMART_CMD_A0)
-#define SMART_CMD_WRITE_FRAME		((0x2 << 9) | SMART_CMD_A0)
-#define SMART_CMD_WAIT_FOR_VSYNC	 (0x3 << 9)
-#define SMART_CMD_NOOP			 (0x4 << 9)
-#define SMART_CMD_INTERRUPT		 (0x5 << 9)
-
-#define SMART_CMD(x)	(SMART_CMD_WRITE_COMMAND | ((x) & 0xff))
-#define SMART_DAT(x)	(SMART_CMD_WRITE_DATA | ((x) & 0xff))
-
-/* SMART_DELAY() is introduced for software controlled delay primitive which
- * can be inserted between command sequences, unused command 0x6 is used here
- * and delay ranges from 0ms ~ 255ms
- */
-#define SMART_CMD_DELAY		(0x6 << 9)
-#define SMART_DELAY(ms)		(SMART_CMD_DELAY | ((ms) & 0xff))
-#endif /* __ASM_ARCH_REGS_LCD_H */
diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h
deleted file mode 100644
index c36306064eee..000000000000
--- a/arch/arm/mach-pxa/include/mach/uncompress.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-pxa/include/mach/uncompress.h
- *
- * Author:	Nicolas Pitre
- * Copyright:	(C) 2001 MontaVista Software Inc.
- */
-
-#include <linux/serial_reg.h>
-#include <asm/mach-types.h>
-
-#define FFUART_BASE	(0x40100000)
-#define BTUART_BASE	(0x40200000)
-#define STUART_BASE	(0x40700000)
-
-unsigned long uart_base;
-unsigned int uart_shift;
-unsigned int uart_is_pxa;
-
-static inline unsigned char uart_read(int offset)
-{
-	return *(volatile unsigned char *)(uart_base + (offset << uart_shift));
-}
-
-static inline void uart_write(unsigned char val, int offset)
-{
-	*(volatile unsigned char *)(uart_base + (offset << uart_shift)) = val;
-}
-
-static inline int uart_is_enabled(void)
-{
-	/* assume enabled by default for non-PXA uarts */
-	return uart_is_pxa ? uart_read(UART_IER) & UART_IER_UUE : 1;
-}
-
-static inline void putc(char c)
-{
-	if (!uart_is_enabled())
-		return;
-
-	while (!(uart_read(UART_LSR) & UART_LSR_THRE))
-		barrier();
-
-	uart_write(c, UART_TX);
-}
-
-/*
- * This does not append a newline
- */
-static inline void flush(void)
-{
-}
-
-static inline void arch_decomp_setup(void)
-{
-	/* initialize to default */
-	uart_base = FFUART_BASE;
-	uart_shift = 2;
-	uart_is_pxa = 1;
-
-	if (machine_is_littleton() || machine_is_intelmote2()
-	    || machine_is_csb726() || machine_is_stargate2()
-	    || machine_is_cm_x300() || machine_is_balloon3())
-		uart_base = STUART_BASE;
-
-	if (machine_is_arcom_zeus()) {
-		uart_base = 0x10000000;	/* nCS4 */
-		uart_shift = 1;
-		uart_is_pxa = 0;
-	}
-}
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 74efc3ab595f..96f33ef1d9ea 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -17,13 +17,14 @@
 #include <linux/irq.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
+#include <linux/soc/pxa/cpu.h>
 
 #include <asm/exception.h>
 
-#include <mach/hardware.h>
-#include <mach/irqs.h>
+#include "irqs.h"
 
 #include "generic.h"
+#include "pxa-regs.h"
 
 #define ICIP			(0x000)
 #define ICMR			(0x004)
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/irqs.h
index 22bf536a462d..22bf536a462d 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/irqs.h
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 793f61375ee8..98423a96f440 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -31,7 +31,6 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <mach/hardware.h>
 #include <asm/irq.h>
 
 #include <asm/mach/arch.h>
@@ -195,7 +194,6 @@ static struct pxa2xx_spi_controller littleton_spi_info = {
 static struct pxa2xx_spi_chip littleton_tdo24m_chip = {
 	.rx_threshold	= 1,
 	.tx_threshold	= 1,
-	.gpio_cs	= LITTLETON_GPIO_LCD_CS,
 };
 
 static struct spi_board_info littleton_spi_devices[] __initdata = {
@@ -208,8 +206,17 @@ static struct spi_board_info littleton_spi_devices[] __initdata = {
 	},
 };
 
+static struct gpiod_lookup_table littleton_spi_gpio_table = {
+	.dev_id = "spi2",
+	.table = {
+		GPIO_LOOKUP_IDX("gpio-pxa", LITTLETON_GPIO_LCD_CS, "cs", 0, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static void __init littleton_init_spi(void)
 {
+	gpiod_add_lookup_table(&littleton_spi_gpio_table);
 	pxa2xx_set_spi_info(2, &littleton_spi_info);
 	spi_register_board_info(ARRAY_AND_SIZE(littleton_spi_devices));
 }
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 6fc40bc06910..0e4123c5fd42 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -28,7 +28,6 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <linux/sizes.h>
 
@@ -39,12 +38,13 @@
 
 #include "pxa27x.h"
 #include "lpd270.h"
-#include <mach/audio.h>
+#include "addr-map.h"
+#include <linux/platform_data/asoc-pxa.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/irda-pxaficp.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <mach/smemc.h>
+#include "smemc.h"
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index e2411971422d..4f0944f3b262 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -34,7 +34,6 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <linux/sizes.h>
 
@@ -46,14 +45,14 @@
 #include <asm/hardware/sa1111.h>
 
 #include "pxa25x.h"
-#include <mach/audio.h>
-#include <mach/lubbock.h>
+#include <linux/platform_data/asoc-pxa.h>
+#include "lubbock.h"
 #include "udc.h"
 #include <linux/platform_data/irda-pxaficp.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include "pm.h"
-#include <mach/smemc.h>
+#include "smemc.h"
 
 #include "generic.h"
 #include "devices.h"
@@ -132,6 +131,13 @@ static struct pxa2xx_udc_mach_info udc_info __initdata = {
 	// no D+ pullup; lubbock can't connect/disconnect in software
 };
 
+static struct resource lubbock_udc_resources[] = {
+	DEFINE_RES_MEM(0x40600000, 0x10000),
+	DEFINE_RES_IRQ(IRQ_USB),
+	DEFINE_RES_IRQ(LUBBOCK_USB_IRQ),
+	DEFINE_RES_IRQ(LUBBOCK_USB_DISC_IRQ),
+};
+
 /* GPIOs for SA1111 PCMCIA */
 static struct gpiod_lookup_table sa1111_pcmcia_gpio_table = {
 	.dev_id = "1800",
@@ -497,6 +503,9 @@ static void __init lubbock_init(void)
 	lubbock_init_pcmcia();
 
 	clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL);
+	/* lubbock has two extra IRQs */
+	pxa25x_device_udc.resource = lubbock_udc_resources;
+	pxa25x_device_udc.num_resources = ARRAY_SIZE(lubbock_udc_resources);
 	pxa_set_udc_info(&udc_info);
 	pxa_set_fb_info(NULL, &sharp_lm8v31);
 	pxa_set_mci_info(&lubbock_mci_platform_data);
diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/lubbock.h
index a3af4a2f9446..55cf91e22ae2 100644
--- a/arch/arm/mach-pxa/include/mach/lubbock.h
+++ b/arch/arm/mach-pxa/lubbock.h
@@ -1,13 +1,11 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 /*
- *  arch/arm/mach-pxa/include/mach/lubbock.h
- *
  *  Author:	Nicolas Pitre
  *  Created:	Jun 15, 2001
  *  Copyright:	MontaVista Software Inc.
  */
 
-#include <mach/irqs.h>
+#include "irqs.h"
 
 #define LUBBOCK_ETH_PHYS	PXA_CS3_PHYS
 
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index cd9fa465b9b2..0827ebca1d38 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -29,13 +29,13 @@
 #include <linux/regulator/machine.h>
 #include <linux/platform_data/i2c-pxa.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/system_info.h>
 
 #include "pxa27x.h"
-#include <mach/magician.h>
+#include "addr-map.h"
+#include "magician.h"
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/irda-pxaficp.h>
@@ -53,6 +53,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/pxa2xx_spi.h>
 #include <linux/spi/ads7846.h>
+#include <sound/uda1380.h>
 
 static unsigned long magician_pin_config[] __initdata = {
 
@@ -681,7 +682,7 @@ static struct platform_device bq24022 = {
 static struct gpiod_lookup_table bq24022_gpiod_table = {
 	.dev_id = "gpio-regulator",
 	.table = {
-		GPIO_LOOKUP("gpio-pxa", EGPIO_MAGICIAN_BQ24022_ISET2,
+		GPIO_LOOKUP("htc-egpio-0", EGPIO_MAGICIAN_BQ24022_ISET2 - MAGICIAN_EGPIO_BASE,
 			    NULL, GPIO_ACTIVE_HIGH),
 		GPIO_LOOKUP("gpio-pxa", GPIO30_MAGICIAN_BQ24022_nCHARGE_EN,
 			    "enable", GPIO_ACTIVE_LOW),
@@ -899,6 +900,53 @@ static struct platform_device strataflash = {
 };
 
 /*
+ * audio support
+ */
+static struct uda1380_platform_data uda1380_info = {
+	.gpio_power = EGPIO_MAGICIAN_CODEC_POWER,
+	.gpio_reset = EGPIO_MAGICIAN_CODEC_RESET,
+	.dac_clk    = UDA1380_DAC_CLK_WSPLL,
+};
+
+static struct i2c_board_info magician_audio_i2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("uda1380", 0x18),
+		.platform_data = &uda1380_info,
+	},
+};
+
+static struct gpiod_lookup_table magician_audio_gpio_table = {
+	.dev_id = "magician-audio",
+	.table = {
+		GPIO_LOOKUP("htc-egpio-0",
+			    EGPIO_MAGICIAN_SPK_POWER - MAGICIAN_EGPIO_BASE,
+			    "SPK_POWER", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("htc-egpio-0",
+			    EGPIO_MAGICIAN_EP_POWER - MAGICIAN_EGPIO_BASE,
+			    "EP_POWER", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("htc-egpio-0",
+			    EGPIO_MAGICIAN_MIC_POWER - MAGICIAN_EGPIO_BASE,
+			    "MIC_POWER", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("htc-egpio-0",
+			    EGPIO_MAGICIAN_IN_SEL0 - MAGICIAN_EGPIO_BASE,
+			    "IN_SEL0", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("htc-egpio-0",
+			    EGPIO_MAGICIAN_IN_SEL1 - MAGICIAN_EGPIO_BASE,
+			    "IN_SEL1", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static void magician_audio_init(void)
+{
+	i2c_register_board_info(0,
+		ARRAY_AND_SIZE(magician_audio_i2c_board_info));
+
+	gpiod_add_lookup_table(&magician_audio_gpio_table);
+	platform_device_register_simple("magician-audio", -1, NULL, 0);
+}
+
+/*
  * PXA I2C main controller
  */
 
@@ -938,8 +986,6 @@ struct pxa2xx_spi_chip tsc2046_chip_info = {
 	.tx_threshold	= 1,
 	.rx_threshold	= 2,
 	.timeout	= 64,
-	/* NOTICE must be GPIO, incompatibility with hw PXA SPI framing */
-	.gpio_cs	= GPIO14_MAGICIAN_TSC2046_CS,
 };
 
 static struct pxa2xx_spi_controller magician_spi_info = {
@@ -947,6 +993,15 @@ static struct pxa2xx_spi_controller magician_spi_info = {
 	.enable_dma	= 1,
 };
 
+static struct gpiod_lookup_table magician_spi_gpio_table = {
+	.dev_id = "spi2",
+	.table = {
+		/* NOTICE must be GPIO, incompatibility with hw PXA SPI framing */
+		GPIO_LOOKUP_IDX("gpio-pxa", GPIO14_MAGICIAN_TSC2046_CS, "cs", 0, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static struct spi_board_info ads7846_spi_board_info[] __initdata = {
 	{
 		.modalias		= "ads7846",
@@ -1031,6 +1086,7 @@ static void __init magician_init(void)
 	} else
 		pr_err("LCD detection: CPLD mapping failed\n");
 
+	gpiod_add_lookup_table(&magician_spi_gpio_table);
 	pxa2xx_set_spi_info(2, &magician_spi_info);
 	spi_register_board_info(ARRAY_AND_SIZE(ads7846_spi_board_info));
 
@@ -1040,6 +1096,8 @@ static void __init magician_init(void)
 	gpiod_add_lookup_table(&bq24022_gpiod_table);
 	gpiod_add_lookup_table(&gpio_vbus_gpiod_table);
 	platform_add_devices(ARRAY_AND_SIZE(devices));
+
+	magician_audio_init();
 }
 
 MACHINE_START(MAGICIAN, "HTC Magician")
diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/magician.h
index 7d3af561af6f..e1e4f9f6b22b 100644
--- a/arch/arm/mach-pxa/include/mach/magician.h
+++ b/arch/arm/mach-pxa/magician.h
@@ -9,7 +9,7 @@
 #define _MAGICIAN_H_
 
 #include <linux/gpio.h>
-#include <mach/irqs.h>
+#include "irqs.h"
 
 /*
  * PXA GPIOs
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index d237bd030238..fd386f1c414c 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -35,7 +35,6 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <linux/sizes.h>
 
@@ -45,14 +44,15 @@
 #include <asm/mach/flash.h>
 
 #include "pxa27x.h"
-#include <mach/mainstone.h>
-#include <mach/audio.h>
+#include "mainstone.h"
+#include <linux/platform_data/asoc-pxa.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/irda-pxaficp.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <linux/platform_data/keypad-pxa27x.h>
-#include <mach/smemc.h>
+#include "addr-map.h"
+#include "smemc.h"
 
 #include "generic.h"
 #include "devices.h"
@@ -548,6 +548,14 @@ static struct gpiod_lookup_table mainstone_pcmcia_gpio_table = {
 	},
 };
 
+static struct gpiod_lookup_table mainstone_wm97xx_gpio_table = {
+	.dev_id = "wm97xx-touch",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", 4, "touch", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static void __init mainstone_init(void)
 {
 	int SW7 = 0;  /* FIXME: get from SCR (Mst doc section 3.2.1.1) */
@@ -562,6 +570,7 @@ static void __init mainstone_init(void)
 		      "mst-pcmcia1", MST_PCMCIA_INPUTS, 0, NULL,
 		      NULL, mst_pcmcia1_irqs);
 	gpiod_add_lookup_table(&mainstone_pcmcia_gpio_table);
+	gpiod_add_lookup_table(&mainstone_wm97xx_gpio_table);
 
 	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
diff --git a/arch/arm/mach-pxa/include/mach/mainstone.h b/arch/arm/mach-pxa/mainstone.h
index 1698f2ffd7c7..f116c56cf5d9 100644
--- a/arch/arm/mach-pxa/include/mach/mainstone.h
+++ b/arch/arm/mach-pxa/mainstone.h
@@ -1,7 +1,5 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 /*
- *  arch/arm/mach-pxa/include/mach/mainstone.h
- *
  *  Author:	Nicolas Pitre
  *  Created:	Nov 14, 2002
  *  Copyright:	MontaVista Software Inc.
@@ -10,7 +8,7 @@
 #ifndef ASM_ARCH_MAINSTONE_H
 #define ASM_ARCH_MAINSTONE_H
 
-#include <mach/irqs.h>
+#include "irqs.h"
 
 #define MST_ETH_PHYS		PXA_CS4_PHYS
 
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index 6a5451b186c2..57b0782880de 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -16,8 +16,9 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/syscore_ops.h>
+#include <linux/soc/pxa/cpu.h>
 
-#include <mach/pxa2xx-regs.h>
+#include "pxa2xx-regs.h"
 #include "mfp-pxa2xx.h"
 
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.h b/arch/arm/mach-pxa/mfp-pxa2xx.h
index 980145e7ee99..683a3ea5f154 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.h
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.h
@@ -2,7 +2,7 @@
 #ifndef __ASM_ARCH_MFP_PXA2XX_H
 #define __ASM_ARCH_MFP_PXA2XX_H
 
-#include <plat/mfp.h>
+#include <linux/soc/pxa/mfp.h>
 
 /*
  * the following MFP_xxx bit definitions in mfp.h are re-used for pxa2xx:
diff --git a/arch/arm/mach-pxa/mfp-pxa3xx.c b/arch/arm/mach-pxa/mfp-pxa3xx.c
index 56114df9700d..d16ab7451efe 100644
--- a/arch/arm/mach-pxa/mfp-pxa3xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa3xx.c
@@ -16,9 +16,8 @@
 #include <linux/io.h>
 #include <linux/syscore_ops.h>
 
-#include <mach/hardware.h>
 #include "mfp-pxa3xx.h"
-#include <mach/pxa3xx-regs.h>
+#include "pxa3xx-regs.h"
 
 #ifdef CONFIG_PM
 /*
diff --git a/arch/arm/mach-pxa/mfp-pxa3xx.h b/arch/arm/mach-pxa/mfp-pxa3xx.h
index cdd830926d1c..81fec4fa5a0f 100644
--- a/arch/arm/mach-pxa/mfp-pxa3xx.h
+++ b/arch/arm/mach-pxa/mfp-pxa3xx.h
@@ -2,7 +2,7 @@
 #ifndef __ASM_ARCH_MFP_PXA3XX_H
 #define __ASM_ARCH_MFP_PXA3XX_H
 
-#include <plat/mfp.h>
+#include <linux/soc/pxa/mfp.h>
 
 #define MFPR_BASE	(0x40e10000)
 
diff --git a/arch/arm/mach-pxa/include/mach/mfp.h b/arch/arm/mach-pxa/mfp.h
index dbb961fb570e..7e0879bd4102 100644
--- a/arch/arm/mach-pxa/include/mach/mfp.h
+++ b/arch/arm/mach-pxa/mfp.h
@@ -13,6 +13,6 @@
 #ifndef __ASM_ARCH_MFP_H
 #define __ASM_ARCH_MFP_H
 
-#include <plat/mfp.h>
+#include <linux/soc/pxa/mfp.h>
 
 #endif /* __ASM_ARCH_MFP_H */
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index a79f296e81e0..d08f962ffb04 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -41,8 +41,8 @@
 #include "udc.h"
 #include "pxa27x-udc.h"
 #include <linux/platform_data/media/camera-pxa.h>
-#include <mach/audio.h>
-#include <mach/smemc.h>
+#include <linux/platform_data/asoc-pxa.h>
+#include "smemc.h"
 
 #include "mioa701.h"
 
diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c
index fde386f6cffe..35546b59c88e 100644
--- a/arch/arm/mach-pxa/mxm8x10.c
+++ b/arch/arm/mach-pxa/mxm8x10.c
@@ -26,6 +26,7 @@
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/asoc-pxa.h>
 #include "pxa320.h"
 
 #include "mxm8x10.h"
@@ -356,14 +357,9 @@ void __init mxm_8x10_usb_host_init(void)
 	pxa_set_ohci_info(&mxm_8x10_ohci_platform_data);
 }
 
-/* AC97 Sound Support */
-static struct platform_device mxm_8x10_ac97_device = {
-	.name = "pxa2xx-ac97"
-};
-
 void __init mxm_8x10_ac97_init(void)
 {
-	platform_device_register(&mxm_8x10_ac97_device);
+	pxa_set_ac97_info(NULL);
 }
 
 /* NAND flash Support */
diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c
index 6230381a7ca0..1a8d25eecac3 100644
--- a/arch/arm/mach-pxa/palm27x.c
+++ b/arch/arm/mach-pxa/palm27x.c
@@ -25,7 +25,7 @@
 #include <asm/mach/map.h>
 
 #include "pxa27x.h"
-#include <mach/audio.h>
+#include <linux/platform_data/asoc-pxa.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/irda-pxaficp.h>
diff --git a/arch/arm/mach-pxa/palmld-pcmcia.c b/arch/arm/mach-pxa/palmld-pcmcia.c
new file mode 100644
index 000000000000..720294a50864
--- /dev/null
+++ b/arch/arm/mach-pxa/palmld-pcmcia.c
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * linux/drivers/pcmcia/pxa2xx_palmld.c
+ *
+ * Driver for Palm LifeDrive PCMCIA
+ *
+ * Copyright (C) 2006 Alex Osborne <ato@meshy.org>
+ * Copyright (C) 2007-2011 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <pcmcia/soc_common.h>
+
+#include "palmld.h"
+
+static struct gpio palmld_pcmcia_gpios[] = {
+	{ GPIO_NR_PALMLD_PCMCIA_POWER,	GPIOF_INIT_LOW,	"PCMCIA Power" },
+	{ GPIO_NR_PALMLD_PCMCIA_RESET,	GPIOF_INIT_HIGH,"PCMCIA Reset" },
+};
+
+static int palmld_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+	int ret;
+
+	ret = gpio_request_array(palmld_pcmcia_gpios,
+				ARRAY_SIZE(palmld_pcmcia_gpios));
+
+	skt->stat[SOC_STAT_RDY].gpio = GPIO_NR_PALMLD_PCMCIA_READY;
+	skt->stat[SOC_STAT_RDY].name = "PCMCIA Ready";
+
+	return ret;
+}
+
+static void palmld_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
+{
+	gpio_free_array(palmld_pcmcia_gpios, ARRAY_SIZE(palmld_pcmcia_gpios));
+}
+
+static void palmld_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+					struct pcmcia_state *state)
+{
+	state->detect = 1; /* always inserted */
+	state->vs_3v  = 1;
+	state->vs_Xv  = 0;
+}
+
+static int palmld_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+					const socket_state_t *state)
+{
+	gpio_set_value(GPIO_NR_PALMLD_PCMCIA_POWER, 1);
+	gpio_set_value(GPIO_NR_PALMLD_PCMCIA_RESET,
+			!!(state->flags & SS_RESET));
+
+	return 0;
+}
+
+static struct pcmcia_low_level palmld_pcmcia_ops = {
+	.owner			= THIS_MODULE,
+
+	.first			= 1,
+	.nr			= 1,
+
+	.hw_init		= palmld_pcmcia_hw_init,
+	.hw_shutdown		= palmld_pcmcia_hw_shutdown,
+
+	.socket_state		= palmld_pcmcia_socket_state,
+	.configure_socket	= palmld_pcmcia_configure_socket,
+};
+
+static struct platform_device *palmld_pcmcia_device;
+
+static int __init palmld_pcmcia_init(void)
+{
+	int ret;
+
+	if (!machine_is_palmld())
+		return -ENODEV;
+
+	palmld_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+	if (!palmld_pcmcia_device)
+		return -ENOMEM;
+
+	ret = platform_device_add_data(palmld_pcmcia_device, &palmld_pcmcia_ops,
+					sizeof(palmld_pcmcia_ops));
+
+	if (!ret)
+		ret = platform_device_add(palmld_pcmcia_device);
+
+	if (ret)
+		platform_device_put(palmld_pcmcia_device);
+
+	return ret;
+}
+
+static void __exit palmld_pcmcia_exit(void)
+{
+	platform_device_unregister(palmld_pcmcia_device);
+}
+
+module_init(palmld_pcmcia_init);
+module_exit(palmld_pcmcia_exit);
+
+MODULE_AUTHOR("Alex Osborne <ato@meshy.org>,"
+	    " Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("PCMCIA support for Palm LifeDrive");
+MODULE_ALIAS("platform:pxa2xx-pcmcia");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 5f73716a77f0..32308c63884e 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -29,8 +29,8 @@
 #include <asm/mach/map.h>
 
 #include "pxa27x.h"
-#include <mach/audio.h>
-#include <mach/palmld.h>
+#include "palmld.h"
+#include <linux/platform_data/asoc-pxa.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/irda-pxaficp.h>
@@ -279,9 +279,15 @@ static inline void palmld_leds_init(void) {}
  * HDD
  ******************************************************************************/
 #if defined(CONFIG_PATA_PALMLD) || defined(CONFIG_PATA_PALMLD_MODULE)
+static struct resource palmld_ide_resources[] = {
+	DEFINE_RES_MEM(PALMLD_IDE_PHYS, 0x1000),
+};
+
 static struct platform_device palmld_ide_device = {
-	.name	= "pata_palmld",
-	.id	= -1,
+	.name		= "pata_palmld",
+	.id		= -1,
+	.resource	= palmld_ide_resources,
+	.num_resources	= ARRAY_SIZE(palmld_ide_resources),
 };
 
 static struct gpiod_lookup_table palmld_ide_gpio_table = {
@@ -341,6 +347,14 @@ static struct gpiod_lookup_table palmld_mci_gpio_table = {
 	},
 };
 
+static struct gpiod_lookup_table palmld_wm97xx_touch_gpio_table = {
+	.dev_id = "wm97xx-touch",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", 27, "touch", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static void __init palmld_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmld_pin_config));
@@ -349,6 +363,7 @@ static void __init palmld_init(void)
 	pxa_set_stuart_info(NULL);
 
 	palm27x_mmc_init(&palmld_mci_gpio_table);
+	gpiod_add_lookup_table(&palmld_wm97xx_touch_gpio_table);
 	palm27x_pm_init(PALMLD_STR_BASE);
 	palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
 	palm27x_irda_init(GPIO_NR_PALMLD_IR_DISABLE);
diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/palmld.h
index 99a6d8b3a1e3..99a6d8b3a1e3 100644
--- a/arch/arm/mach-pxa/include/mach/palmld.h
+++ b/arch/arm/mach-pxa/palmld.h
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 7c7cbb4e677e..463b62ec1b01 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -29,7 +29,7 @@
 #include <asm/mach/map.h>
 
 #include "pxa27x.h"
-#include <mach/audio.h>
+#include <linux/platform_data/asoc-pxa.h>
 #include "palmt5.h"
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/video-pxafb.h>
@@ -190,6 +190,14 @@ static struct gpiod_lookup_table palmt5_mci_gpio_table = {
 	},
 };
 
+static struct gpiod_lookup_table palmt5_wm97xx_touch_gpio_table = {
+	.dev_id = "wm97xx-touch",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", 27, "touch", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static void __init palmt5_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmt5_pin_config));
@@ -198,6 +206,7 @@ static void __init palmt5_init(void)
 	pxa_set_stuart_info(NULL);
 
 	palm27x_mmc_init(&palmt5_mci_gpio_table);
+	gpiod_add_lookup_table(&palmt5_wm97xx_touch_gpio_table);
 	palm27x_pm_init(PALMT5_STR_BASE);
 	palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
 	palm27x_udc_init(GPIO_NR_PALMT5_USB_DETECT_N,
diff --git a/arch/arm/mach-pxa/palmt5.h b/arch/arm/mach-pxa/palmt5.h
index 1fb1da7c8da3..cf84aedca717 100644
--- a/arch/arm/mach-pxa/palmt5.h
+++ b/arch/arm/mach-pxa/palmt5.h
@@ -11,7 +11,7 @@
 #ifndef _INCLUDE_PALMT5_H_
 #define _INCLUDE_PALMT5_H_
 
-#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
 
 /** HERE ARE GPIOs **/
 
diff --git a/arch/arm/mach-pxa/palmtc-pcmcia.c b/arch/arm/mach-pxa/palmtc-pcmcia.c
new file mode 100644
index 000000000000..8e3f382343fe
--- /dev/null
+++ b/arch/arm/mach-pxa/palmtc-pcmcia.c
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * linux/drivers/pcmcia/pxa2xx_palmtc.c
+ *
+ * Driver for Palm Tungsten|C PCMCIA
+ *
+ * Copyright (C) 2008 Alex Osborne <ato@meshy.org>
+ * Copyright (C) 2009-2011 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+
+#include <asm/mach-types.h>
+#include "palmtc.h"
+#include <pcmcia/soc_common.h>
+
+static struct gpio palmtc_pcmcia_gpios[] = {
+	{ GPIO_NR_PALMTC_PCMCIA_POWER1,	GPIOF_INIT_LOW,	"PCMCIA Power 1" },
+	{ GPIO_NR_PALMTC_PCMCIA_POWER2,	GPIOF_INIT_LOW,	"PCMCIA Power 2" },
+	{ GPIO_NR_PALMTC_PCMCIA_POWER3,	GPIOF_INIT_LOW,	"PCMCIA Power 3" },
+	{ GPIO_NR_PALMTC_PCMCIA_RESET,	GPIOF_INIT_HIGH,"PCMCIA Reset" },
+	{ GPIO_NR_PALMTC_PCMCIA_PWRREADY, GPIOF_IN,	"PCMCIA Power Ready" },
+};
+
+static int palmtc_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+	int ret;
+
+	ret = gpio_request_array(palmtc_pcmcia_gpios,
+				ARRAY_SIZE(palmtc_pcmcia_gpios));
+
+	skt->stat[SOC_STAT_RDY].gpio = GPIO_NR_PALMTC_PCMCIA_READY;
+	skt->stat[SOC_STAT_RDY].name = "PCMCIA Ready";
+
+	return ret;
+}
+
+static void palmtc_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
+{
+	gpio_free_array(palmtc_pcmcia_gpios, ARRAY_SIZE(palmtc_pcmcia_gpios));
+}
+
+static void palmtc_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+					struct pcmcia_state *state)
+{
+	state->detect = 1; /* always inserted */
+	state->vs_3v  = 1;
+	state->vs_Xv  = 0;
+}
+
+static int palmtc_wifi_powerdown(void)
+{
+	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_RESET, 1);
+	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER2, 0);
+	mdelay(40);
+	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER1, 0);
+	return 0;
+}
+
+static int palmtc_wifi_powerup(void)
+{
+	int timeout = 50;
+
+	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER3, 1);
+	mdelay(50);
+
+	/* Power up the card, 1.8V first, after a while 3.3V */
+	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER1, 1);
+	mdelay(100);
+	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER2, 1);
+
+	/* Wait till the card is ready */
+	while (!gpio_get_value(GPIO_NR_PALMTC_PCMCIA_PWRREADY) &&
+		timeout) {
+		mdelay(1);
+		timeout--;
+	}
+
+	/* Power down the WiFi in case of error */
+	if (!timeout) {
+		palmtc_wifi_powerdown();
+		return 1;
+	}
+
+	/* Reset the card */
+	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_RESET, 1);
+	mdelay(20);
+	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_RESET, 0);
+	mdelay(25);
+
+	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER3, 0);
+
+	return 0;
+}
+
+static int palmtc_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+					const socket_state_t *state)
+{
+	int ret = 1;
+
+	if (state->Vcc == 0)
+		ret = palmtc_wifi_powerdown();
+	else if (state->Vcc == 33)
+		ret = palmtc_wifi_powerup();
+
+	return ret;
+}
+
+static struct pcmcia_low_level palmtc_pcmcia_ops = {
+	.owner			= THIS_MODULE,
+
+	.first			= 0,
+	.nr			= 1,
+
+	.hw_init		= palmtc_pcmcia_hw_init,
+	.hw_shutdown		= palmtc_pcmcia_hw_shutdown,
+
+	.socket_state		= palmtc_pcmcia_socket_state,
+	.configure_socket	= palmtc_pcmcia_configure_socket,
+};
+
+static struct platform_device *palmtc_pcmcia_device;
+
+static int __init palmtc_pcmcia_init(void)
+{
+	int ret;
+
+	if (!machine_is_palmtc())
+		return -ENODEV;
+
+	palmtc_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+	if (!palmtc_pcmcia_device)
+		return -ENOMEM;
+
+	ret = platform_device_add_data(palmtc_pcmcia_device, &palmtc_pcmcia_ops,
+					sizeof(palmtc_pcmcia_ops));
+
+	if (!ret)
+		ret = platform_device_add(palmtc_pcmcia_device);
+
+	if (ret)
+		platform_device_put(palmtc_pcmcia_device);
+
+	return ret;
+}
+
+static void __exit palmtc_pcmcia_exit(void)
+{
+	platform_device_unregister(palmtc_pcmcia_device);
+}
+
+module_init(palmtc_pcmcia_init);
+module_exit(palmtc_pcmcia_exit);
+
+MODULE_AUTHOR("Alex Osborne <ato@meshy.org>,"
+	    " Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("PCMCIA support for Palm Tungsten|C");
+MODULE_ALIAS("platform:pxa2xx-pcmcia");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index 455cb8ccaf26..3054ffa397ad 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -29,8 +29,8 @@
 #include <asm/mach/map.h>
 
 #include "pxa25x.h"
-#include <mach/audio.h>
-#include <mach/palmtc.h>
+#include <linux/platform_data/asoc-pxa.h>
+#include "palmtc.h"
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/irda-pxaficp.h>
diff --git a/arch/arm/mach-pxa/include/mach/palmtc.h b/arch/arm/mach-pxa/palmtc.h
index 9257a02c46e5..9257a02c46e5 100644
--- a/arch/arm/mach-pxa/include/mach/palmtc.h
+++ b/arch/arm/mach-pxa/palmtc.h
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index a2b10db4aacc..fedac670a8af 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -29,7 +29,7 @@
 #include <asm/mach/map.h>
 
 #include "pxa25x.h"
-#include <mach/audio.h>
+#include <linux/platform_data/asoc-pxa.h>
 #include "palmte2.h"
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/video-pxafb.h>
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index 2bf0f7f3ea24..238a31f32cba 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -29,7 +29,7 @@
 
 #include "pxa27x.h"
 #include "pxa27x-udc.h"
-#include <mach/audio.h>
+#include <linux/platform_data/asoc-pxa.h>
 #include "palmtreo.h"
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/video-pxafb.h>
@@ -37,7 +37,7 @@
 #include <linux/platform_data/keypad-pxa27x.h>
 #include "udc.h"
 #include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <mach/pxa2xx-regs.h>
+#include "pxa2xx-regs.h"
 #include <linux/platform_data/asoc-palm27x.h>
 #include <linux/platform_data/media/camera-pxa.h>
 #include "palm27x.h"
diff --git a/arch/arm/mach-pxa/palmtx-pcmcia.c b/arch/arm/mach-pxa/palmtx-pcmcia.c
new file mode 100644
index 000000000000..8c2aaad93043
--- /dev/null
+++ b/arch/arm/mach-pxa/palmtx-pcmcia.c
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * linux/drivers/pcmcia/pxa2xx_palmtx.c
+ *
+ * Driver for Palm T|X PCMCIA
+ *
+ * Copyright (C) 2007-2011 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include "palmtx.h"
+#include <pcmcia/soc_common.h>
+
+static struct gpio palmtx_pcmcia_gpios[] = {
+	{ GPIO_NR_PALMTX_PCMCIA_POWER1,	GPIOF_INIT_LOW,	"PCMCIA Power 1" },
+	{ GPIO_NR_PALMTX_PCMCIA_POWER2,	GPIOF_INIT_LOW,	"PCMCIA Power 2" },
+	{ GPIO_NR_PALMTX_PCMCIA_RESET,	GPIOF_INIT_HIGH,"PCMCIA Reset" },
+};
+
+static int palmtx_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+	int ret;
+
+	ret = gpio_request_array(palmtx_pcmcia_gpios,
+				ARRAY_SIZE(palmtx_pcmcia_gpios));
+
+	skt->stat[SOC_STAT_RDY].gpio = GPIO_NR_PALMTX_PCMCIA_READY;
+	skt->stat[SOC_STAT_RDY].name = "PCMCIA Ready";
+
+	return ret;
+}
+
+static void palmtx_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
+{
+	gpio_free_array(palmtx_pcmcia_gpios, ARRAY_SIZE(palmtx_pcmcia_gpios));
+}
+
+static void palmtx_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+					struct pcmcia_state *state)
+{
+	state->detect = 1; /* always inserted */
+	state->vs_3v  = 1;
+	state->vs_Xv  = 0;
+}
+
+static int
+palmtx_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+				const socket_state_t *state)
+{
+	gpio_set_value(GPIO_NR_PALMTX_PCMCIA_POWER1, 1);
+	gpio_set_value(GPIO_NR_PALMTX_PCMCIA_POWER2, 1);
+	gpio_set_value(GPIO_NR_PALMTX_PCMCIA_RESET,
+			!!(state->flags & SS_RESET));
+
+	return 0;
+}
+
+static struct pcmcia_low_level palmtx_pcmcia_ops = {
+	.owner			= THIS_MODULE,
+
+	.first			= 0,
+	.nr			= 1,
+
+	.hw_init		= palmtx_pcmcia_hw_init,
+	.hw_shutdown		= palmtx_pcmcia_hw_shutdown,
+
+	.socket_state		= palmtx_pcmcia_socket_state,
+	.configure_socket	= palmtx_pcmcia_configure_socket,
+};
+
+static struct platform_device *palmtx_pcmcia_device;
+
+static int __init palmtx_pcmcia_init(void)
+{
+	int ret;
+
+	if (!machine_is_palmtx())
+		return -ENODEV;
+
+	palmtx_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+	if (!palmtx_pcmcia_device)
+		return -ENOMEM;
+
+	ret = platform_device_add_data(palmtx_pcmcia_device, &palmtx_pcmcia_ops,
+					sizeof(palmtx_pcmcia_ops));
+
+	if (!ret)
+		ret = platform_device_add(palmtx_pcmcia_device);
+
+	if (ret)
+		platform_device_put(palmtx_pcmcia_device);
+
+	return ret;
+}
+
+static void __exit palmtx_pcmcia_exit(void)
+{
+	platform_device_unregister(palmtx_pcmcia_device);
+}
+
+module_init(palmtx_pcmcia_init);
+module_exit(palmtx_pcmcia_exit);
+
+MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("PCMCIA support for Palm T|X");
+MODULE_ALIAS("platform:pxa2xx-pcmcia");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 07332c92c9f7..c0d0762540ab 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -32,8 +32,8 @@
 #include <asm/mach/map.h>
 
 #include "pxa27x.h"
-#include <mach/audio.h>
-#include <mach/palmtx.h>
+#include <linux/platform_data/asoc-pxa.h>
+#include "palmtx.h"
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/irda-pxaficp.h>
@@ -345,6 +345,14 @@ static struct gpiod_lookup_table palmtx_mci_gpio_table = {
 	},
 };
 
+static struct gpiod_lookup_table palmtx_wm97xx_touch_gpio_table = {
+	.dev_id = "wm97xx-touch",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", 27, "touch", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static void __init palmtx_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
@@ -353,6 +361,7 @@ static void __init palmtx_init(void)
 	pxa_set_stuart_info(NULL);
 
 	palm27x_mmc_init(&palmtx_mci_gpio_table);
+	gpiod_add_lookup_table(&palmtx_wm97xx_touch_gpio_table);
 	palm27x_pm_init(PALMTX_STR_BASE);
 	palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
 	palm27x_udc_init(GPIO_NR_PALMTX_USB_DETECT_N,
diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/palmtx.h
index ec88abf0fc6c..ec88abf0fc6c 100644
--- a/arch/arm/mach-pxa/include/mach/palmtx.h
+++ b/arch/arm/mach-pxa/palmtx.h
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index b4a5fe02a0af..66e8fe6f1661 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -34,7 +34,7 @@
 #include <asm/mach/map.h>
 
 #include "pxa27x.h"
-#include <mach/audio.h>
+#include <linux/platform_data/asoc-pxa.h>
 #include "palmz72.h"
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/video-pxafb.h>
diff --git a/arch/arm/mach-pxa/pcm027.h b/arch/arm/mach-pxa/pcm027.h
index 0c4ab636ce4e..58ade4ad6ba3 100644
--- a/arch/arm/mach-pxa/pcm027.h
+++ b/arch/arm/mach-pxa/pcm027.h
@@ -10,7 +10,7 @@
  * Definitions of CPU card resources only
  */
 
-#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
 
 /* phyCORE-PXA270 (PCM027) Interrupts */
 #define PCM027_IRQ(x)          (IRQ_BOARD_START + (x))
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 8dfcc366d0fe..33a9d2eeca1c 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -26,7 +26,7 @@
 
 #include <asm/mach/map.h>
 #include "pxa27x.h"
-#include <mach/audio.h>
+#include <linux/platform_data/asoc-pxa.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include "pcm990_baseboard.h"
diff --git a/arch/arm/mach-pxa/pcm990_baseboard.h b/arch/arm/mach-pxa/pcm990_baseboard.h
index 5be11d1b7019..18cf71decb03 100644
--- a/arch/arm/mach-pxa/pcm990_baseboard.h
+++ b/arch/arm/mach-pxa/pcm990_baseboard.h
@@ -7,7 +7,7 @@
  */
 
 #include "pcm027.h"
-#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
 
 /*
  * definitions relevant only when the PCM-990
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 3a4ecc3c8f8b..7772a39430ed 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -30,7 +30,6 @@
 #include <linux/mtd/sharpsl.h>
 #include <linux/memblock.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
@@ -40,11 +39,13 @@
 #include <asm/mach/irq.h>
 
 #include "pxa25x.h"
-#include <linux/platform_data/mmc-pxamci.h>
 #include "udc.h"
+#include "poodle.h"
+
+#include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/irda-pxaficp.h>
-#include <mach/poodle.h>
 #include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/asoc-poodle.h>
 
 #include <asm/hardware/scoop.h>
 #include <asm/hardware/locomo.h>
@@ -156,12 +157,6 @@ static struct scoop_pcmcia_config poodle_pcmcia_config = {
 
 EXPORT_SYMBOL(poodle_scoop_device);
 
-
-static struct platform_device poodle_audio_device = {
-	.name	= "poodle-audio",
-	.id	= -1,
-};
-
 /* LoCoMo device */
 static struct resource locomo_resources[] = {
 	[0] = {
@@ -180,7 +175,7 @@ static struct locomo_platform_data locomo_info = {
 	.irq_base	= IRQ_BOARD_START,
 };
 
-struct platform_device poodle_locomo_device = {
+static struct platform_device poodle_locomo_device = {
 	.name		= "locomo",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(locomo_resources),
@@ -190,13 +185,35 @@ struct platform_device poodle_locomo_device = {
 	},
 };
 
-EXPORT_SYMBOL(poodle_locomo_device);
+static struct poodle_audio_platform_data poodle_audio_pdata = {
+	.locomo_dev	= &poodle_locomo_device.dev,
+
+	.gpio_amp_on   	= POODLE_LOCOMO_GPIO_AMP_ON,
+	.gpio_mute_l   	= POODLE_LOCOMO_GPIO_MUTE_L,
+	.gpio_mute_r   	= POODLE_LOCOMO_GPIO_MUTE_R,
+	.gpio_232vcc_on	= POODLE_LOCOMO_GPIO_232VCC_ON,
+	.gpio_jk_b     	= POODLE_LOCOMO_GPIO_JK_B,
+};
+
+static struct platform_device poodle_audio_device = {
+	.name	= "poodle-audio",
+	.id	= -1,
+	.dev.platform_data = &poodle_audio_pdata,
+};
 
 #if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
 static struct pxa2xx_spi_controller poodle_spi_info = {
 	.num_chipselect	= 1,
 };
 
+static struct gpiod_lookup_table poodle_spi_gpio_table = {
+	.dev_id = "pxa2xx-spi.1",
+	.table = {
+		GPIO_LOOKUP_IDX("gpio-pxa", POODLE_GPIO_TP_CS, "cs", 0, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static struct ads7846_platform_data poodle_ads7846_info = {
 	.model			= 7846,
 	.vref_delay_usecs	= 100,
@@ -205,23 +222,19 @@ static struct ads7846_platform_data poodle_ads7846_info = {
 	.gpio_pendown		= POODLE_GPIO_TP_INT,
 };
 
-static struct pxa2xx_spi_chip poodle_ads7846_chip = {
-	.gpio_cs		= POODLE_GPIO_TP_CS,
-};
-
 static struct spi_board_info poodle_spi_devices[] = {
 	{
 		.modalias	= "ads7846",
 		.max_speed_hz	= 10000,
 		.bus_num	= 1,
 		.platform_data	= &poodle_ads7846_info,
-		.controller_data= &poodle_ads7846_chip,
 		.irq		= PXA_GPIO_TO_IRQ(POODLE_GPIO_TP_INT),
 	},
 };
 
 static void __init poodle_init_spi(void)
 {
+	gpiod_add_lookup_table(&poodle_spi_gpio_table);
 	pxa2xx_set_spi_info(1, &poodle_spi_info);
 	spi_register_board_info(ARRAY_AND_SIZE(poodle_spi_devices));
 }
diff --git a/arch/arm/mach-pxa/include/mach/poodle.h b/arch/arm/mach-pxa/poodle.h
index b56b19351a03..00798b44f204 100644
--- a/arch/arm/mach-pxa/include/mach/poodle.h
+++ b/arch/arm/mach-pxa/poodle.h
@@ -89,6 +89,4 @@
 
 #define POODLE_NR_IRQS		(IRQ_BOARD_START + 4)	/* 4 for LoCoMo */
 
-extern struct platform_device poodle_locomo_device;
-
 #endif /* __ASM_ARCH_POODLE_H  */
diff --git a/arch/arm/mach-pxa/pxa-dt.c b/arch/arm/mach-pxa/pxa-dt.c
index d32d5c8e966f..5e5d543fdf46 100644
--- a/arch/arm/mach-pxa/pxa-dt.c
+++ b/arch/arm/mach-pxa/pxa-dt.c
@@ -11,7 +11,7 @@
 #include <linux/of_platform.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
-#include <mach/irqs.h>
+#include "irqs.h"
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/pxa-regs.h b/arch/arm/mach-pxa/pxa-regs.h
new file mode 100644
index 000000000000..ba5120c06b8a
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa-regs.h
@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software Inc.
+ */
+#ifndef __ASM_MACH_PXA_REGS_H
+#define __ASM_MACH_PXA_REGS_H
+
+/*
+ * Workarounds for at least 2 errata so far require this.
+ * The mapping is set in mach-pxa/generic.c.
+ */
+#define UNCACHED_PHYS_0		0xfe000000
+#define UNCACHED_PHYS_0_SIZE	0x00100000
+
+/*
+ * Intel PXA2xx internal register mapping:
+ *
+ * 0x40000000 - 0x41ffffff <--> 0xf2000000 - 0xf3ffffff
+ * 0x44000000 - 0x45ffffff <--> 0xf4000000 - 0xf5ffffff
+ * 0x48000000 - 0x49ffffff <--> 0xf6000000 - 0xf7ffffff
+ * 0x4c000000 - 0x4dffffff <--> 0xf8000000 - 0xf9ffffff
+ * 0x50000000 - 0x51ffffff <--> 0xfa000000 - 0xfbffffff
+ * 0x54000000 - 0x55ffffff <--> 0xfc000000 - 0xfdffffff
+ * 0x58000000 - 0x59ffffff <--> 0xfe000000 - 0xffffffff
+ *
+ * Note that not all PXA2xx chips implement all those addresses, and the
+ * kernel only maps the minimum needed range of this mapping.
+ */
+#define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1))
+#define io_p2v(x) IOMEM(0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1))
+
+#ifndef __ASSEMBLY__
+# define __REG(x)	(*((volatile u32 __iomem *)io_p2v(x)))
+
+/* With indexed regs we don't want to feed the index through io_p2v()
+   especially if it is a variable, otherwise horrible code will result. */
+# define __REG2(x,y)	\
+	(*(volatile u32 __iomem*)((u32)&__REG(x) + (y)))
+
+# define __PREG(x)	(io_v2p((u32)&(x)))
+
+#else
+
+# define __REG(x)	io_p2v(x)
+# define __PREG(x)	io_v2p(x)
+
+#endif
+
+
+#endif
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 678641ab46e5..6b34d7c169ea 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -26,16 +26,16 @@
 #include <linux/irq.h>
 #include <linux/irqchip.h>
 #include <linux/platform_data/mmp_dma.h>
+#include <linux/soc/pxa/cpu.h>
 
 #include <asm/mach/map.h>
 #include <asm/suspend.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
+#include "irqs.h"
 #include "pxa25x.h"
-#include <mach/reset.h>
+#include "reset.h"
 #include "pm.h"
-#include <mach/dma.h>
-#include <mach/smemc.h>
+#include "addr-map.h"
+#include "smemc.h"
 
 #include "generic.h"
 #include "devices.h"
@@ -240,7 +240,7 @@ static int __init pxa25x_init(void)
 
 	if (cpu_is_pxa25x()) {
 
-		reset_status = RCSR;
+		pxa_register_wdt(RCSR);
 
 		pxa25x_init_pm();
 
diff --git a/arch/arm/mach-pxa/pxa25x.h b/arch/arm/mach-pxa/pxa25x.h
index b58d0fbdb4db..eaaa87666324 100644
--- a/arch/arm/mach-pxa/pxa25x.h
+++ b/arch/arm/mach-pxa/pxa25x.h
@@ -2,9 +2,9 @@
 #ifndef __MACH_PXA25x_H
 #define __MACH_PXA25x_H
 
-#include <mach/hardware.h>
-#include <mach/pxa2xx-regs.h>
+#include "addr-map.h"
+#include "pxa2xx-regs.h"
 #include "mfp-pxa25x.h"
-#include <mach/irqs.h>
+#include "irqs.h"
 
 #endif /* __MACH_PXA25x_H */
diff --git a/arch/arm/mach-pxa/pxa27x-udc.h b/arch/arm/mach-pxa/pxa27x-udc.h
index faf73804697f..2d3df3b1cb68 100644
--- a/arch/arm/mach-pxa/pxa27x-udc.h
+++ b/arch/arm/mach-pxa/pxa27x-udc.h
@@ -2,6 +2,8 @@
 #ifndef _ASM_ARCH_PXA27X_UDC_H
 #define _ASM_ARCH_PXA27X_UDC_H
 
+#include "pxa-regs.h"
+
 #ifdef _ASM_ARCH_PXA25X_UDC_H
 #error You cannot include both PXA25x and PXA27x UDC support
 #endif
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index f0ba7ed24cb6..afbf6ace954f 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -23,18 +23,18 @@
 #include <linux/irq.h>
 #include <linux/platform_data/i2c-pxa.h>
 #include <linux/platform_data/mmp_dma.h>
+#include <linux/soc/pxa/cpu.h>
 
 #include <asm/mach/map.h>
-#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/suspend.h>
-#include <mach/irqs.h>
+#include "irqs.h"
 #include "pxa27x.h"
-#include <mach/reset.h>
+#include "reset.h"
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include "pm.h"
-#include <mach/dma.h>
-#include <mach/smemc.h>
+#include "addr-map.h"
+#include "smemc.h"
 
 #include "generic.h"
 #include "devices.h"
@@ -337,7 +337,7 @@ static int __init pxa27x_init(void)
 
 	if (cpu_is_pxa27x()) {
 
-		reset_status = RCSR;
+		pxa_register_wdt(RCSR);
 
 		pxa27x_init_pm();
 
diff --git a/arch/arm/mach-pxa/pxa27x.h b/arch/arm/mach-pxa/pxa27x.h
index abdc02fb4f03..ede96f3f7214 100644
--- a/arch/arm/mach-pxa/pxa27x.h
+++ b/arch/arm/mach-pxa/pxa27x.h
@@ -3,10 +3,10 @@
 #define __MACH_PXA27x_H
 
 #include <linux/suspend.h>
-#include <mach/hardware.h>
-#include <mach/pxa2xx-regs.h>
+#include "addr-map.h"
+#include "pxa2xx-regs.h"
 #include "mfp-pxa27x.h"
-#include <mach/irqs.h>
+#include "irqs.h"
 
 #define ARB_CNTRL	__REG(0x48000048)  /* Arbiter Control Register */
 
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/pxa2xx-regs.h
index fa121e135915..0b7eaf6b5813 100644
--- a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
+++ b/arch/arm/mach-pxa/pxa2xx-regs.h
@@ -11,7 +11,7 @@
 #ifndef __PXA2XX_REGS_H
 #define __PXA2XX_REGS_H
 
-#include <mach/hardware.h>
+#include "pxa-regs.h"
 
 /*
  * Power Manager
@@ -136,51 +136,6 @@
 #define CKEN		io_p2v(0x41300004)  /* Clock Enable Register */
 #define OSCC		io_p2v(0x41300008)  /* Oscillator Configuration Register */
 
-#define CCCR_N_MASK	0x0380	/* Run Mode Frequency to Turbo Mode Frequency Multiplier */
-#define CCCR_M_MASK	0x0060	/* Memory Frequency to Run Mode Frequency Multiplier */
-#define CCCR_L_MASK	0x001f	/* Crystal Frequency to Memory Frequency Multiplier */
-
-#define CCCR_CPDIS_BIT	(31)
-#define CCCR_PPDIS_BIT	(30)
-#define CCCR_LCD_26_BIT	(27)
-#define CCCR_A_BIT	(25)
-
-#define CCSR_N2_MASK	CCCR_N_MASK
-#define CCSR_M_MASK	CCCR_M_MASK
-#define CCSR_L_MASK	CCCR_L_MASK
-#define CCSR_N2_SHIFT	7
-
-#define CKEN_AC97CONF   (31)    /* AC97 Controller Configuration */
-#define CKEN_CAMERA	(24)	/* Camera Interface Clock Enable */
-#define CKEN_SSP1	(23)	/* SSP1 Unit Clock Enable */
-#define CKEN_MEMC	(22)	/* Memory Controller Clock Enable */
-#define CKEN_MEMSTK	(21)	/* Memory Stick Host Controller */
-#define CKEN_IM		(20)	/* Internal Memory Clock Enable */
-#define CKEN_KEYPAD	(19)	/* Keypad Interface Clock Enable */
-#define CKEN_USIM	(18)	/* USIM Unit Clock Enable */
-#define CKEN_MSL	(17)	/* MSL Unit Clock Enable */
-#define CKEN_LCD	(16)	/* LCD Unit Clock Enable */
-#define CKEN_PWRI2C	(15)	/* PWR I2C Unit Clock Enable */
-#define CKEN_I2C	(14)	/* I2C Unit Clock Enable */
-#define CKEN_FICP	(13)	/* FICP Unit Clock Enable */
-#define CKEN_MMC	(12)	/* MMC Unit Clock Enable */
-#define CKEN_USB	(11)	/* USB Unit Clock Enable */
-#define CKEN_ASSP	(10)	/* ASSP (SSP3) Clock Enable */
-#define CKEN_USBHOST	(10)	/* USB Host Unit Clock Enable */
-#define CKEN_OSTIMER	(9)	/* OS Timer Unit Clock Enable */
-#define CKEN_NSSP	(9)	/* NSSP (SSP2) Clock Enable */
-#define CKEN_I2S	(8)	/* I2S Unit Clock Enable */
-#define CKEN_BTUART	(7)	/* BTUART Unit Clock Enable */
-#define CKEN_FFUART	(6)	/* FFUART Unit Clock Enable */
-#define CKEN_STUART	(5)	/* STUART Unit Clock Enable */
-#define CKEN_HWUART	(4)	/* HWUART Unit Clock Enable */
-#define CKEN_SSP3	(4)	/* SSP3 Unit Clock Enable */
-#define CKEN_SSP	(3)	/* SSP Unit Clock Enable */
-#define CKEN_SSP2	(3)	/* SSP2 Unit Clock Enable */
-#define CKEN_AC97	(2)	/* AC97 Unit Clock Enable */
-#define CKEN_PWM1	(1)	/* PWM1 Clock Enable */
-#define CKEN_PWM0	(0)	/* PWM0 Clock Enable */
-
 #define OSCC_OON	(1 << 1)	/* 32.768kHz OON (write-once only bit) */
 #define OSCC_OOK	(1 << 0)	/* 32.768kHz OOK (read-only bit) */
 
diff --git a/arch/arm/mach-pxa/pxa2xx.c b/arch/arm/mach-pxa/pxa2xx.c
index 2d26cd2afbf3..4aafd692c1e8 100644
--- a/arch/arm/mach-pxa/pxa2xx.c
+++ b/arch/arm/mach-pxa/pxa2xx.c
@@ -12,10 +12,12 @@
 #include <linux/device.h>
 #include <linux/io.h>
 
-#include <mach/hardware.h>
-#include <mach/pxa2xx-regs.h>
+#include "pxa2xx-regs.h"
 #include "mfp-pxa25x.h"
-#include <mach/reset.h>
+#include "generic.h"
+#include "reset.h"
+#include "smemc.h"
+#include <linux/soc/pxa/smemc.h>
 #include <linux/platform_data/irda-pxaficp.h>
 
 void pxa2xx_clear_reset_status(unsigned int mask)
@@ -51,3 +53,27 @@ void pxa2xx_transceiver_mode(struct device *dev, int mode)
 		BUG();
 }
 EXPORT_SYMBOL_GPL(pxa2xx_transceiver_mode);
+
+#define MDCNFG_DRAC2(mdcnfg)	(((mdcnfg) >> 21) & 0x3)
+#define MDCNFG_DRAC0(mdcnfg)	(((mdcnfg) >> 5) & 0x3)
+
+int pxa2xx_smemc_get_sdram_rows(void)
+{
+	static int sdram_rows;
+	unsigned int drac2 = 0, drac0 = 0;
+	u32 mdcnfg;
+
+	if (sdram_rows)
+		return sdram_rows;
+
+	mdcnfg = readl_relaxed(MDCNFG);
+
+	if (mdcnfg & (MDCNFG_DE2 | MDCNFG_DE3))
+		drac2 = MDCNFG_DRAC2(mdcnfg);
+
+	if (mdcnfg & (MDCNFG_DE0 | MDCNFG_DE1))
+		drac0 = MDCNFG_DRAC0(mdcnfg);
+
+	sdram_rows = 1 << (11 + max(drac0, drac2));
+	return sdram_rows;
+}
diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c
index 7f2f5a6a2263..f77ec118d5b9 100644
--- a/arch/arm/mach-pxa/pxa300.c
+++ b/arch/arm/mach-pxa/pxa300.c
@@ -14,6 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/soc/pxa/cpu.h>
 
 #include "pxa300.h"
 
diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c
index 78abcc741df7..e372e6c118de 100644
--- a/arch/arm/mach-pxa/pxa320.c
+++ b/arch/arm/mach-pxa/pxa320.c
@@ -14,6 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/soc/pxa/cpu.h>
 
 #include "pxa320.h"
 
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/pxa3xx-regs.h
index 070f6c74196e..4b11cf81a9e6 100644
--- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
+++ b/arch/arm/mach-pxa/pxa3xx-regs.h
@@ -10,7 +10,7 @@
 #ifndef __ASM_ARCH_PXA3XX_REGS_H
 #define __ASM_ARCH_PXA3XX_REGS_H
 
-#include <mach/hardware.h>
+#include "pxa-regs.h"
 
 /*
  * Oscillator Configuration Register (OSCC)
@@ -131,73 +131,4 @@
 #define CKENC		__REG(0x41340024)	/* C Clock Enable Register */
 #define AC97_DIV	__REG(0x41340014)	/* AC97 clock divisor value register */
 
-#define ACCR_XPDIS		(1 << 31)	/* Core PLL Output Disable */
-#define ACCR_SPDIS		(1 << 30)	/* System PLL Output Disable */
-#define ACCR_D0CS		(1 << 26)	/* D0 Mode Clock Select */
-#define ACCR_PCCE		(1 << 11)	/* Power Mode Change Clock Enable */
-#define ACCR_DDR_D0CS		(1 << 7)	/* DDR SDRAM clock frequency in D0CS (PXA31x only) */
-
-#define ACCR_SMCFS_MASK		(0x7 << 23)	/* Static Memory Controller Frequency Select */
-#define ACCR_SFLFS_MASK		(0x3 << 18)	/* Frequency Select for Internal Memory Controller */
-#define ACCR_XSPCLK_MASK	(0x3 << 16)	/* Core Frequency during Frequency Change */
-#define ACCR_HSS_MASK		(0x3 << 14)	/* System Bus-Clock Frequency Select */
-#define ACCR_DMCFS_MASK		(0x3 << 12)	/* Dynamic Memory Controller Clock Frequency Select */
-#define ACCR_XN_MASK		(0x7 << 8)	/* Core PLL Turbo-Mode-to-Run-Mode Ratio */
-#define ACCR_XL_MASK		(0x1f)		/* Core PLL Run-Mode-to-Oscillator Ratio */
-
-#define ACCR_SMCFS(x)		(((x) & 0x7) << 23)
-#define ACCR_SFLFS(x)		(((x) & 0x3) << 18)
-#define ACCR_XSPCLK(x)		(((x) & 0x3) << 16)
-#define ACCR_HSS(x)		(((x) & 0x3) << 14)
-#define ACCR_DMCFS(x)		(((x) & 0x3) << 12)
-#define ACCR_XN(x)		(((x) & 0x7) << 8)
-#define ACCR_XL(x)		((x) & 0x1f)
-
-/*
- * Clock Enable Bit
- */
-#define CKEN_LCD	1	/* < LCD Clock Enable */
-#define CKEN_USBH	2	/* < USB host clock enable */
-#define CKEN_CAMERA	3	/* < Camera interface clock enable */
-#define CKEN_NAND	4	/* < NAND Flash Controller Clock Enable */
-#define CKEN_USB2	6	/* < USB 2.0 client clock enable. */
-#define CKEN_DMC	8	/* < Dynamic Memory Controller clock enable */
-#define CKEN_SMC	9	/* < Static Memory Controller clock enable */
-#define CKEN_ISC	10	/* < Internal SRAM Controller clock enable */
-#define CKEN_BOOT	11	/* < Boot rom clock enable */
-#define CKEN_MMC1	12	/* < MMC1 Clock enable */
-#define CKEN_MMC2	13	/* < MMC2 clock enable */
-#define CKEN_KEYPAD	14	/* < Keypand Controller Clock Enable */
-#define CKEN_CIR	15	/* < Consumer IR Clock Enable */
-#define CKEN_USIM0	17	/* < USIM[0] Clock Enable */
-#define CKEN_USIM1	18	/* < USIM[1] Clock Enable */
-#define CKEN_TPM	19	/* < TPM clock enable */
-#define CKEN_UDC	20	/* < UDC clock enable */
-#define CKEN_BTUART	21	/* < BTUART clock enable */
-#define CKEN_FFUART	22	/* < FFUART clock enable */
-#define CKEN_STUART	23	/* < STUART clock enable */
-#define CKEN_AC97	24	/* < AC97 clock enable */
-#define CKEN_TOUCH	25	/* < Touch screen Interface Clock Enable */
-#define CKEN_SSP1	26	/* < SSP1 clock enable */
-#define CKEN_SSP2	27	/* < SSP2 clock enable */
-#define CKEN_SSP3	28	/* < SSP3 clock enable */
-#define CKEN_SSP4	29	/* < SSP4 clock enable */
-#define CKEN_MSL0	30	/* < MSL0 clock enable */
-#define CKEN_PWM0	32	/* < PWM[0] clock enable */
-#define CKEN_PWM1	33	/* < PWM[1] clock enable */
-#define CKEN_I2C	36	/* < I2C clock enable */
-#define CKEN_INTC	38	/* < Interrupt controller clock enable */
-#define CKEN_GPIO	39	/* < GPIO clock enable */
-#define CKEN_1WIRE	40	/* < 1-wire clock enable */
-#define CKEN_HSIO2	41	/* < HSIO2 clock enable */
-#define CKEN_MINI_IM	48	/* < Mini-IM */
-#define CKEN_MINI_LCD	49	/* < Mini LCD */
-
-#define CKEN_MMC3	5	/* < MMC3 Clock Enable */
-#define CKEN_MVED	43	/* < MVED clock enable */
-
-/* Note: GCU clock enable bit differs on PXA300/PXA310 and PXA320 */
-#define CKEN_PXA300_GCU		42	/* Graphics controller clock enable */
-#define CKEN_PXA320_GCU		7	/* Graphics controller clock enable */
-
 #endif /* __ASM_ARCH_PXA3XX_REGS_H */
diff --git a/arch/arm/mach-pxa/pxa3xx-ulpi.c b/arch/arm/mach-pxa/pxa3xx-ulpi.c
index 4bd7da1f8657..c29a7f0fa1b0 100644
--- a/arch/arm/mach-pxa/pxa3xx-ulpi.c
+++ b/arch/arm/mach-pxa/pxa3xx-ulpi.c
@@ -21,8 +21,8 @@
 #include <linux/clk.h>
 #include <linux/usb.h>
 #include <linux/usb/otg.h>
+#include <linux/soc/pxa/cpu.h>
 
-#include <mach/hardware.h>
 #include "regs-u2d.h"
 #include <linux/platform_data/usb-pxa3xx-ulpi.h>
 
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 560160682df6..979642aa7ffe 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -24,17 +24,18 @@
 #include <linux/syscore_ops.h>
 #include <linux/platform_data/i2c-pxa.h>
 #include <linux/platform_data/mmp_dma.h>
+#include <linux/soc/pxa/cpu.h>
+#include <linux/clk/pxa.h>
 
 #include <asm/mach/map.h>
 #include <asm/suspend.h>
-#include <mach/hardware.h>
-#include <mach/pxa3xx-regs.h>
-#include <mach/reset.h>
+#include "pxa3xx-regs.h"
+#include "reset.h"
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include "pm.h"
-#include <mach/dma.h>
-#include <mach/smemc.h>
-#include <mach/irqs.h>
+#include "addr-map.h"
+#include "smemc.h"
+#include "irqs.h"
 
 #include "generic.h"
 #include "devices.h"
@@ -51,6 +52,10 @@ extern void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int));
 #define NDCR_ND_ARB_EN		(1 << 12)
 #define NDCR_ND_ARB_CNTL	(1 << 19)
 
+#define CKEN_BOOT  		11      /* < Boot rom clock enable */
+#define CKEN_TPM   		19      /* < TPM clock enable */
+#define CKEN_HSIO2 		41      /* < HSIO2 clock enable */
+
 #ifdef CONFIG_PM
 
 #define ISRAM_START	0x5c000000
@@ -463,7 +468,7 @@ static int __init pxa3xx_init(void)
 
 	if (cpu_is_pxa3xx()) {
 
-		reset_status = ARSR;
+		pxa_register_wdt(ARSR);
 
 		/*
 		 * clear RDH bit every time after reset
diff --git a/arch/arm/mach-pxa/pxa3xx.h b/arch/arm/mach-pxa/pxa3xx.h
index 6d4502aa9d06..81825f7ad258 100644
--- a/arch/arm/mach-pxa/pxa3xx.h
+++ b/arch/arm/mach-pxa/pxa3xx.h
@@ -2,8 +2,8 @@
 #ifndef __MACH_PXA3XX_H	
 #define __MACH_PXA3XX_H
 
-#include <mach/hardware.h>
-#include <mach/pxa3xx-regs.h>
-#include <mach/irqs.h>
+#include "addr-map.h"
+#include "pxa3xx-regs.h"
+#include "irqs.h"
 
 #endif /* __MACH_PXA3XX_H */
diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c
index bf91de4267e5..b9021a40cbd1 100644
--- a/arch/arm/mach-pxa/pxa930.c
+++ b/arch/arm/mach-pxa/pxa930.c
@@ -13,6 +13,7 @@
 #include <linux/irq.h>
 #include <linux/gpio-pxa.h>
 #include <linux/platform_device.h>
+#include <linux/soc/pxa/cpu.h>
 
 #include "pxa930.h"
 
diff --git a/arch/arm/mach-pxa/include/mach/regs-ost.h b/arch/arm/mach-pxa/regs-ost.h
index deb564ed8ee7..c8001cfc8d6b 100644
--- a/arch/arm/mach-pxa/include/mach/regs-ost.h
+++ b/arch/arm/mach-pxa/regs-ost.h
@@ -2,11 +2,13 @@
 #ifndef __ASM_MACH_REGS_OST_H
 #define __ASM_MACH_REGS_OST_H
 
-#include <mach/hardware.h>
+#include "pxa-regs.h"
 
 /*
  * OS Timer & Match Registers
  */
+#define OST_PHYS	0x40A00000
+#define OST_LEN		0x00000020
 
 #define OSMR0		io_p2v(0x40A00000)  /* */
 #define OSMR1		io_p2v(0x40A00004)  /* */
diff --git a/arch/arm/mach-pxa/regs-rtc.h b/arch/arm/mach-pxa/regs-rtc.h
index b1f9ff14e335..96255a0f595e 100644
--- a/arch/arm/mach-pxa/regs-rtc.h
+++ b/arch/arm/mach-pxa/regs-rtc.h
@@ -2,7 +2,7 @@
 #ifndef __ASM_MACH_REGS_RTC_H
 #define __ASM_MACH_REGS_RTC_H
 
-#include <mach/hardware.h>
+#include "pxa-regs.h"
 
 /*
  * Real Time Clock
diff --git a/arch/arm/mach-pxa/regs-u2d.h b/arch/arm/mach-pxa/regs-u2d.h
index fe4c80ad87ec..ab517ba62c9a 100644
--- a/arch/arm/mach-pxa/regs-u2d.h
+++ b/arch/arm/mach-pxa/regs-u2d.h
@@ -2,8 +2,6 @@
 #ifndef __ASM_ARCH_PXA3xx_U2D_H
 #define __ASM_ARCH_PXA3xx_U2D_H
 
-#include <mach/bitfield.h>
-
 /*
  * USB2 device controller registers and bits definitions
  */
diff --git a/arch/arm/mach-pxa/include/mach/regs-uart.h b/arch/arm/mach-pxa/regs-uart.h
index 9a168f83afeb..490e9ca16297 100644
--- a/arch/arm/mach-pxa/include/mach/regs-uart.h
+++ b/arch/arm/mach-pxa/regs-uart.h
@@ -2,6 +2,8 @@
 #ifndef __ASM_ARCH_REGS_UART_H
 #define __ASM_ARCH_REGS_UART_H
 
+#include "pxa-regs.h"
+
 /*
  * UARTs
  */
diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c
index af78405aa4e9..f0be90573ad3 100644
--- a/arch/arm/mach-pxa/reset.c
+++ b/arch/arm/mach-pxa/reset.c
@@ -7,12 +7,9 @@
 #include <asm/proc-fns.h>
 #include <asm/system_misc.h>
 
-#include <mach/regs-ost.h>
-#include <mach/reset.h>
-#include <mach/smemc.h>
-
-unsigned int reset_status;
-EXPORT_SYMBOL(reset_status);
+#include "regs-ost.h"
+#include "reset.h"
+#include "smemc.h"
 
 static void do_hw_reset(void);
 
diff --git a/arch/arm/mach-pxa/include/mach/reset.h b/arch/arm/mach-pxa/reset.h
index e1c4d100fd45..963dd190bc13 100644
--- a/arch/arm/mach-pxa/include/mach/reset.h
+++ b/arch/arm/mach-pxa/reset.h
@@ -8,8 +8,8 @@
 #define RESET_STATUS_GPIO	(1 << 3)	/* GPIO Reset */
 #define RESET_STATUS_ALL	(0xf)
 
-extern unsigned int reset_status;
 extern void clear_reset_status(unsigned int mask);
+extern void pxa_register_wdt(unsigned int reset_status);
 
 /**
  * init_gpio_reset() - register GPIO as reset generator
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 83cfbb882a2d..a829baf8d922 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -24,7 +24,7 @@
 
 #include <asm/mach-types.h>
 #include "pm.h"
-#include <mach/pxa2xx-regs.h>
+#include "pxa2xx-regs.h"
 #include "regs-rtc.h"
 #include "sharpsl_pm.h"
 
diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S
index 6c5b3ffd2cd3..d58cf52e3848 100644
--- a/arch/arm/mach-pxa/sleep.S
+++ b/arch/arm/mach-pxa/sleep.S
@@ -13,13 +13,14 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <mach/hardware.h>
-#include <mach/smemc.h>
-#include <mach/pxa2xx-regs.h>
+#include "smemc.h"
+#include "pxa2xx-regs.h"
 
 #define MDREFR_KDIV	0x200a4000	// all banks
 #define CCCR_SLEEP	0x00000107	// L=7 2N=2 A=0 PPDIS=0 CPDIS=0
-
+#define CCCR_N_MASK     0x00000380
+#define CCCR_M_MASK     0x00000060
+#define CCCR_L_MASK     0x0000001f
 		.text
 
 #ifdef CONFIG_PXA3xx
diff --git a/arch/arm/mach-pxa/smemc.c b/arch/arm/mach-pxa/smemc.c
index 32e82cc92ea5..2d2a321d82f8 100644
--- a/arch/arm/mach-pxa/smemc.c
+++ b/arch/arm/mach-pxa/smemc.c
@@ -8,9 +8,10 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/syscore_ops.h>
+#include <linux/soc/pxa/cpu.h>
 
-#include <mach/hardware.h>
-#include <mach/smemc.h>
+#include "smemc.h"
+#include <linux/soc/pxa/smemc.h>
 
 #ifdef CONFIG_PM
 static unsigned long msc[2];
@@ -70,3 +71,11 @@ static int __init smemc_init(void)
 }
 subsys_initcall(smemc_init);
 #endif
+
+static const unsigned int df_clkdiv[4] = { 1, 2, 4, 1 };
+unsigned int pxa3xx_smemc_get_memclkdiv(void)
+{
+	unsigned long memclkcfg = __raw_readl(MEMCLKCFG);
+
+	return	df_clkdiv[(memclkcfg >> 16) & 0x3];
+}
diff --git a/arch/arm/mach-pxa/include/mach/smemc.h b/arch/arm/mach-pxa/smemc.h
index 9b2453a7ab23..9b2453a7ab23 100644
--- a/arch/arm/mach-pxa/include/mach/smemc.h
+++ b/arch/arm/mach-pxa/smemc.h
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 371008e9bb02..9964729cd428 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -39,14 +39,14 @@
 
 #include "pxa27x.h"
 #include "pxa27x-udc.h"
-#include <mach/reset.h>
+#include "reset.h"
 #include <linux/platform_data/irda-pxaficp.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <linux/platform_data/video-pxafb.h>
-#include <mach/spitz.h>
+#include "spitz.h"
 #include "sharpsl_pm.h"
-#include <mach/smemc.h>
+#include "smemc.h"
 
 #include "generic.h"
 #include "devices.h"
@@ -510,10 +510,6 @@ static struct ads7846_platform_data spitz_ads7846_info = {
 	.wait_for_sync		= spitz_ads7846_wait_for_hsync,
 };
 
-static struct pxa2xx_spi_chip spitz_ads7846_chip = {
-	.gpio_cs		= SPITZ_GPIO_ADS7846_CS,
-};
-
 static void spitz_bl_kick_battery(void)
 {
 	void (*kick_batt)(void);
@@ -555,14 +551,6 @@ static struct corgi_lcd_platform_data spitz_lcdcon_info = {
 	.kick_battery		= spitz_bl_kick_battery,
 };
 
-static struct pxa2xx_spi_chip spitz_lcdcon_chip = {
-	.gpio_cs	= SPITZ_GPIO_LCDCON_CS,
-};
-
-static struct pxa2xx_spi_chip spitz_max1111_chip = {
-	.gpio_cs	= SPITZ_GPIO_MAX1111_CS,
-};
-
 static struct spi_board_info spitz_spi_devices[] = {
 	{
 		.modalias		= "ads7846",
@@ -570,7 +558,6 @@ static struct spi_board_info spitz_spi_devices[] = {
 		.bus_num		= 2,
 		.chip_select		= 0,
 		.platform_data		= &spitz_ads7846_info,
-		.controller_data	= &spitz_ads7846_chip,
 		.irq			= PXA_GPIO_TO_IRQ(SPITZ_GPIO_TP_INT),
 	}, {
 		.modalias		= "corgi-lcd",
@@ -578,13 +565,11 @@ static struct spi_board_info spitz_spi_devices[] = {
 		.bus_num		= 2,
 		.chip_select		= 1,
 		.platform_data		= &spitz_lcdcon_info,
-		.controller_data	= &spitz_lcdcon_chip,
 	}, {
 		.modalias		= "max1111",
 		.max_speed_hz		= 450000,
 		.bus_num		= 2,
 		.chip_select		= 2,
-		.controller_data	= &spitz_max1111_chip,
 	},
 };
 
@@ -592,6 +577,16 @@ static struct pxa2xx_spi_controller spitz_spi_info = {
 	.num_chipselect	= 3,
 };
 
+static struct gpiod_lookup_table spitz_spi_gpio_table = {
+	.dev_id = "spi2",
+	.table = {
+		GPIO_LOOKUP_IDX("gpio-pxa", SPITZ_GPIO_ADS7846_CS, "cs", 0, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("gpio-pxa", SPITZ_GPIO_LCDCON_CS, "cs", 1, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("gpio-pxa", SPITZ_GPIO_MAX1111_CS, "cs", 2, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static void __init spitz_spi_init(void)
 {
 	if (machine_is_akita())
@@ -599,6 +594,7 @@ static void __init spitz_spi_init(void)
 	else
 		gpiod_add_lookup_table(&spitz_lcdcon_gpio_table);
 
+	gpiod_add_lookup_table(&spitz_spi_gpio_table);
 	pxa2xx_set_spi_info(2, &spitz_spi_info);
 	spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices));
 }
@@ -966,11 +962,42 @@ static void __init spitz_i2c_init(void)
 static inline void spitz_i2c_init(void) {}
 #endif
 
+static struct gpiod_lookup_table spitz_audio_gpio_table = {
+	.dev_id = "spitz-audio",
+	.table = {
+		GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_L - SPITZ_SCP_GPIO_BASE,
+			    "mute-l", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_R - SPITZ_SCP_GPIO_BASE,
+			    "mute-r", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("sharp-scoop.1", SPITZ_GPIO_MIC_BIAS - SPITZ_SCP2_GPIO_BASE,
+			    "mic", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table akita_audio_gpio_table = {
+	.dev_id = "spitz-audio",
+	.table = {
+		GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_L - SPITZ_SCP_GPIO_BASE,
+			    "mute-l", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_R - SPITZ_SCP_GPIO_BASE,
+			    "mute-r", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("i2c-max7310", AKITA_GPIO_MIC_BIAS - AKITA_IOEXP_GPIO_BASE,
+			    "mic", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 /******************************************************************************
  * Audio devices
  ******************************************************************************/
 static inline void spitz_audio_init(void)
 {
+	if (machine_is_akita())
+		gpiod_add_lookup_table(&akita_audio_gpio_table);
+	else
+		gpiod_add_lookup_table(&spitz_audio_gpio_table);
+
 	platform_device_register_simple("spitz-audio", -1, NULL, 0);
 }
 
diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/spitz.h
index 04828d8918aa..04828d8918aa 100644
--- a/arch/arm/mach-pxa/include/mach/spitz.h
+++ b/arch/arm/mach-pxa/spitz.h
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 25a1f8c5a738..6689b67f9ce5 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -18,9 +18,8 @@
 
 #include <asm/irq.h>
 #include <asm/mach-types.h>
-#include <mach/hardware.h>
 
-#include <mach/spitz.h>
+#include "spitz.h"
 #include "pxa27x.h"
 #include "sharpsl_pm.h"
 
diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S
index eab1645bb4ad..ad32b9c0ebce 100644
--- a/arch/arm/mach-pxa/standby.S
+++ b/arch/arm/mach-pxa/standby.S
@@ -1,19 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * PXA27x standby mode
  *
  * Author: David Burrage
  *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
+ * 2005 (c) MontaVista Software, Inc.
  */
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <mach/hardware.h>
 
-#include <mach/pxa2xx-regs.h>
+#include "pxa2xx-regs.h"
 
 		.text
 
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
deleted file mode 100644
index 8ca02ec1d44c..000000000000
--- a/arch/arm/mach-pxa/stargate2.c
+++ /dev/null
@@ -1,1030 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-pxa/stargate2.c
- *
- *  Author:	Ed C. Epp
- *  Created:	Nov 05, 2002
- *  Copyright:	Intel Corp.
- *
- *  Modified 2009:  Jonathan Cameron <jic23@cam.ac.uk>
- */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/bitops.h>
-#include <linux/fb.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/machine.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/mtd/partitions.h>
-
-#include <linux/platform_data/i2c-pxa.h>
-#include <linux/platform_data/pcf857x.h>
-#include <linux/smc91x.h>
-#include <linux/gpio/machine.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/property.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-
-#include "pxa27x.h"
-#include <linux/platform_data/mmc-pxamci.h>
-#include "udc.h"
-#include "pxa27x-udc.h"
-#include <mach/smemc.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/mfd/da903x.h>
-
-#include "devices.h"
-#include "generic.h"
-
-#define STARGATE_NR_IRQS	(IRQ_BOARD_START + 8)
-
-/* Bluetooth */
-#define SG2_BT_RESET		81
-
-/* SD */
-#define SG2_GPIO_nSD_DETECT	90
-#define SG2_SD_POWER_ENABLE	89
-
-static unsigned long sg2_im2_unified_pin_config[] __initdata = {
-	/* Device Identification for wakeup*/
-	GPIO102_GPIO,
-	/* DA9030 */
-	GPIO1_GPIO,
-
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO112_MMC_CMD,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-
-	/* 802.15.4 radio - driver out of mainline */
-	GPIO22_GPIO,			/* CC_RSTN */
-	GPIO114_GPIO,			/* CC_FIFO */
-	GPIO116_GPIO,			/* CC_CCA */
-	GPIO0_GPIO,			/* CC_FIFOP */
-	GPIO16_GPIO,			/* CCSFD */
-	GPIO115_GPIO,			/* Power enable */
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* SSP 3 - 802.15.4 radio */
-	GPIO39_GPIO,			/* Chip Select */
-	GPIO34_SSP3_SCLK,
-	GPIO35_SSP3_TXD,
-	GPIO41_SSP3_RXD,
-
-	/* SSP 2 to daughter boards */
-	GPIO11_SSP2_RXD,
-	GPIO38_SSP2_TXD,
-	GPIO36_SSP2_SCLK,
-	GPIO37_GPIO, /* chip select */
-
-	/* SSP 1 - to daughter boards */
-	GPIO24_GPIO,			/* Chip Select */
-	GPIO23_SSP1_SCLK,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-
-	/* BTUART Basic Connector*/
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* STUART  - IM2 via debug board not sure on SG2*/
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
-	/* Basic sensor board */
-	GPIO96_GPIO,	/* accelerometer interrupt */
-	GPIO99_GPIO,	/* ADC interrupt */
-
-	/* SHT15 */
-	GPIO100_GPIO,
-	GPIO98_GPIO,
-
-	/* Basic sensor board */
-	GPIO96_GPIO,	/* accelerometer interrupt */
-	GPIO99_GPIO,	/* ADC interrupt */
-
-	/* Connector pins specified as gpios */
-	GPIO94_GPIO, /* large basic connector pin 14 */
-	GPIO10_GPIO, /* large basic connector pin 23 */
-};
-
-static struct gpiod_lookup_table sht15_gpiod_table = {
-	.dev_id = "sht15",
-	.table = {
-		/* FIXME: should this have |GPIO_OPEN_DRAIN set? */
-		GPIO_LOOKUP("gpio-pxa", 100, "data", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", 98, "clk", GPIO_ACTIVE_HIGH),
-	},
-};
-
-static struct platform_device sht15 = {
-	.name = "sht15",
-	.id = -1,
-};
-
-static struct regulator_consumer_supply stargate2_sensor_3_con[] = {
-	REGULATOR_SUPPLY("vcc", "sht15"),
-};
-
-enum stargate2_ldos{
-	vcc_vref,
-	vcc_cc2420,
-	/* a mote connector? */
-	vcc_mica,
-	/* the CSR bluecore chip */
-	vcc_bt,
-	/* The two voltages available to sensor boards */
-	vcc_sensor_1_8,
-	vcc_sensor_3,
-	/* directly connected to the pxa27x */
-	vcc_sram_ext,
-	vcc_pxa_pll,
-	vcc_pxa_usim, /* Reference voltage for certain gpios */
-	vcc_pxa_mem,
-	vcc_pxa_flash,
-	vcc_pxa_core, /*Dc-Dc buck not yet supported */
-	vcc_lcd,
-	vcc_bb,
-	vcc_bbio, /*not sure!*/
-	vcc_io, /* cc2420 802.15.4 radio and pxa vcc_io ?*/
-};
-
-/* The values of the various regulator constraints are obviously dependent
- * on exactly what is wired to each ldo.  Unfortunately this information is
- * not generally available.  More information has been requested from Xbow.
- */
-static struct regulator_init_data stargate2_ldo_init_data[] = {
-	[vcc_bbio] = {
-		.constraints = { /* board default 1.8V */
-			.name = "vcc_bbio",
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-		},
-	},
-	[vcc_bb] = {
-		.constraints = { /* board default 2.8V */
-			.name = "vcc_bb",
-			.min_uV = 2700000,
-			.max_uV = 3000000,
-		},
-	},
-	[vcc_pxa_flash] = {
-		.constraints = {/* default is 1.8V */
-			.name = "vcc_pxa_flash",
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-		},
-	},
-	[vcc_cc2420] = { /* also vcc_io */
-		.constraints = {
-			/* board default is 2.8V */
-			.name = "vcc_cc2420",
-			.min_uV = 2700000,
-			.max_uV = 3300000,
-		},
-	},
-	[vcc_vref] = { /* Reference for what? */
-		.constraints = { /* default 1.8V */
-			.name = "vcc_vref",
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-		},
-	},
-	[vcc_sram_ext] = {
-		.constraints = { /* default 2.8V */
-			.name = "vcc_sram_ext",
-			.min_uV = 2800000,
-			.max_uV = 2800000,
-		},
-	},
-	[vcc_mica] = {
-		.constraints = { /* default 2.8V */
-			.name = "vcc_mica",
-			.min_uV = 2800000,
-			.max_uV = 2800000,
-		},
-	},
-	[vcc_bt] = {
-		.constraints = { /* default 2.8V */
-			.name = "vcc_bt",
-			.min_uV = 2800000,
-			.max_uV = 2800000,
-		},
-	},
-	[vcc_lcd] = {
-		.constraints = { /* default 2.8V */
-			.name = "vcc_lcd",
-			.min_uV = 2700000,
-			.max_uV = 3300000,
-		},
-	},
-	[vcc_io] = { /* Same or higher than everything
-			  * bar vccbat and vccusb */
-		.constraints = { /* default 2.8V */
-			.name = "vcc_io",
-			.min_uV = 2692000,
-			.max_uV = 3300000,
-		},
-	},
-	[vcc_sensor_1_8] = {
-		.constraints = { /* default 1.8V */
-			.name = "vcc_sensor_1_8",
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-		},
-	},
-	[vcc_sensor_3] = { /* curiously default 2.8V */
-		.constraints = {
-			.name = "vcc_sensor_3",
-			.min_uV = 2800000,
-			.max_uV = 3000000,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(stargate2_sensor_3_con),
-		.consumer_supplies = stargate2_sensor_3_con,
-	},
-	[vcc_pxa_pll] = { /* 1.17V - 1.43V, default 1.3V*/
-		.constraints = {
-			.name = "vcc_pxa_pll",
-			.min_uV = 1170000,
-			.max_uV = 1430000,
-		},
-	},
-	[vcc_pxa_usim] = {
-		.constraints = { /* default 1.8V */
-			.name = "vcc_pxa_usim",
-			.min_uV = 1710000,
-			.max_uV = 2160000,
-		},
-	},
-	[vcc_pxa_mem] = {
-		.constraints = { /* default 1.8V */
-			.name = "vcc_pxa_mem",
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-		},
-	},
-};
-
-static struct mtd_partition stargate2flash_partitions[] = {
-	{
-		.name = "Bootloader",
-		.size = 0x00040000,
-		.offset = 0,
-		.mask_flags = 0,
-	}, {
-		.name = "Kernel",
-		.size = 0x00200000,
-		.offset = 0x00040000,
-		.mask_flags = 0
-	}, {
-		.name = "Filesystem",
-		.size = 0x01DC0000,
-		.offset = 0x00240000,
-		.mask_flags = 0
-	},
-};
-
-static struct resource flash_resources = {
-	.start = PXA_CS0_PHYS,
-	.end = PXA_CS0_PHYS + SZ_32M - 1,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct flash_platform_data stargate2_flash_data = {
-	.map_name = "cfi_probe",
-	.parts = stargate2flash_partitions,
-	.nr_parts = ARRAY_SIZE(stargate2flash_partitions),
-	.name = "PXA27xOnChipROM",
-	.width = 2,
-};
-
-static struct platform_device stargate2_flash_device = {
-	.name = "pxa2xx-flash",
-	.id = 0,
-	.dev = {
-		.platform_data = &stargate2_flash_data,
-	},
-	.resource = &flash_resources,
-	.num_resources = 1,
-};
-
-static struct pxa2xx_spi_controller pxa_ssp_master_0_info = {
-	.num_chipselect = 1,
-};
-
-static struct pxa2xx_spi_controller pxa_ssp_master_1_info = {
-	.num_chipselect = 1,
-};
-
-static struct pxa2xx_spi_controller pxa_ssp_master_2_info = {
-	.num_chipselect = 1,
-};
-
-/* An upcoming kernel change will scrap SFRM usage so these
- * drivers have been moved to use GPIOs */
-static struct pxa2xx_spi_chip staccel_chip_info = {
-	.tx_threshold = 8,
-	.rx_threshold = 8,
-	.dma_burst_size = 8,
-	.timeout = 235,
-	.gpio_cs = 24,
-};
-
-static struct pxa2xx_spi_chip cc2420_info = {
-	.tx_threshold = 8,
-	.rx_threshold = 8,
-	.dma_burst_size = 8,
-	.timeout = 235,
-	.gpio_cs = 39,
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
-	{
-		.modalias = "lis3l02dq",
-		.max_speed_hz = 8000000,/* 8MHz max spi frequency at 3V */
-		.bus_num = 1,
-		.chip_select = 0,
-		.controller_data = &staccel_chip_info,
-		.irq = PXA_GPIO_TO_IRQ(96),
-	}, {
-		.modalias = "cc2420",
-		.max_speed_hz = 6500000,
-		.bus_num = 3,
-		.chip_select = 0,
-		.controller_data = &cc2420_info,
-	},
-};
-
-static void sg2_udc_command(int cmd)
-{
-	switch (cmd) {
-	case PXA2XX_UDC_CMD_CONNECT:
-		UP2OCR |=  UP2OCR_HXOE  | UP2OCR_DPPUE | UP2OCR_DPPUBE;
-		break;
-	case PXA2XX_UDC_CMD_DISCONNECT:
-		UP2OCR &= ~(UP2OCR_HXOE  | UP2OCR_DPPUE | UP2OCR_DPPUBE);
-		break;
-	}
-}
-
-static struct i2c_pxa_platform_data i2c_pwr_pdata = {
-	.fast_mode = 1,
-};
-
-static struct i2c_pxa_platform_data i2c_pdata = {
-	.fast_mode = 1,
-};
-
-static void __init imote2_stargate2_init(void)
-{
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(sg2_im2_unified_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
-	pxa2xx_set_spi_info(2, &pxa_ssp_master_1_info);
-	pxa2xx_set_spi_info(3, &pxa_ssp_master_2_info);
-	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-
-
-	pxa27x_set_i2c_power_info(&i2c_pwr_pdata);
-	pxa_set_i2c_info(&i2c_pdata);
-}
-
-#ifdef CONFIG_MACH_INTELMOTE2
-/* As the the imote2 doesn't currently have a conventional SD slot
- * there is no option to hotplug cards, making all this rather simple
- */
-static int imote2_mci_get_ro(struct device *dev)
-{
-	return 0;
-}
-
-/* Rather simple case as hotplugging not possible */
-static struct pxamci_platform_data imote2_mci_platform_data = {
-	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* default anyway */
-	.get_ro = imote2_mci_get_ro,
-};
-
-static struct gpio_led imote2_led_pins[] = {
-	{
-		.name       =  "imote2:red",
-		.gpio       = 103,
-		.active_low = 1,
-	}, {
-		.name       = "imote2:green",
-		.gpio       = 104,
-		.active_low = 1,
-	}, {
-		.name       = "imote2:blue",
-		.gpio       = 105,
-		.active_low = 1,
-	},
-};
-
-static struct gpio_led_platform_data imote2_led_data = {
-	.num_leds = ARRAY_SIZE(imote2_led_pins),
-	.leds     = imote2_led_pins,
-};
-
-static struct platform_device imote2_leds = {
-	.name = "leds-gpio",
-	.id   = -1,
-	.dev = {
-		.platform_data = &imote2_led_data,
-	},
-};
-
-static struct da903x_subdev_info imote2_da9030_subdevs[] = {
-	{
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO2,
-		.platform_data = &stargate2_ldo_init_data[vcc_bbio],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO3,
-		.platform_data = &stargate2_ldo_init_data[vcc_bb],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO4,
-		.platform_data = &stargate2_ldo_init_data[vcc_pxa_flash],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO5,
-		.platform_data = &stargate2_ldo_init_data[vcc_cc2420],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO6,
-		.platform_data = &stargate2_ldo_init_data[vcc_vref],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO7,
-		.platform_data = &stargate2_ldo_init_data[vcc_sram_ext],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO8,
-		.platform_data = &stargate2_ldo_init_data[vcc_mica],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO9,
-		.platform_data = &stargate2_ldo_init_data[vcc_bt],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO10,
-		.platform_data = &stargate2_ldo_init_data[vcc_sensor_1_8],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO11,
-		.platform_data = &stargate2_ldo_init_data[vcc_sensor_3],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO12,
-		.platform_data = &stargate2_ldo_init_data[vcc_lcd],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO15,
-		.platform_data = &stargate2_ldo_init_data[vcc_pxa_pll],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO17,
-		.platform_data = &stargate2_ldo_init_data[vcc_pxa_usim],
-	}, {
-		.name = "da903x-regulator", /*pxa vcc i/o and cc2420 vcc i/o */
-		.id = DA9030_ID_LDO18,
-		.platform_data = &stargate2_ldo_init_data[vcc_io],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO19,
-		.platform_data = &stargate2_ldo_init_data[vcc_pxa_mem],
-	},
-};
-
-static struct da903x_platform_data imote2_da9030_pdata = {
-	.num_subdevs = ARRAY_SIZE(imote2_da9030_subdevs),
-	.subdevs = imote2_da9030_subdevs,
-};
-
-static struct i2c_board_info __initdata imote2_pwr_i2c_board_info[] = {
-	{
-		.type = "da9030",
-		.addr = 0x49,
-		.platform_data = &imote2_da9030_pdata,
-		.irq = PXA_GPIO_TO_IRQ(1),
-	},
-};
-
-static struct i2c_board_info __initdata imote2_i2c_board_info[] = {
-	{ /* UCAM sensor board */
-		.type = "max1239",
-		.addr = 0x35,
-	}, { /* ITS400 Sensor board only */
-		.type = "max1363",
-		.addr = 0x34,
-		/* Through a nand gate - Also beware, on V2 sensor board the
-		 * pull up resistors are missing.
-		 */
-		.irq = PXA_GPIO_TO_IRQ(99),
-	}, { /* ITS400 Sensor board only */
-		.type = "tsl2561",
-		.addr = 0x49,
-		/* Through a nand gate - Also beware, on V2 sensor board the
-		 * pull up resistors are missing.
-		 */
-		.irq = PXA_GPIO_TO_IRQ(99),
-	}, { /* ITS400 Sensor board only */
-		.type = "tmp175",
-		.addr = 0x4A,
-		.irq = PXA_GPIO_TO_IRQ(96),
-	}, { /* IMB400 Multimedia board */
-		.type = "wm8940",
-		.addr = 0x1A,
-	},
-};
-
-static unsigned long imote2_pin_config[] __initdata = {
-
-	/* Button */
-	GPIO91_GPIO,
-
-	/* LEDS */
-	GPIO103_GPIO, /* red led */
-	GPIO104_GPIO, /* green led */
-	GPIO105_GPIO, /* blue led */
-};
-
-static struct pxa2xx_udc_mach_info imote2_udc_info __initdata = {
-	.udc_command		= sg2_udc_command,
-};
-
-static struct platform_device imote2_audio_device = {
-	.name = "imote2-audio",
-	.id   = -1,
-};
-
-static struct platform_device *imote2_devices[] = {
-	&stargate2_flash_device,
-	&imote2_leds,
-	&sht15,
-	&imote2_audio_device,
-};
-
-static void __init imote2_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(imote2_pin_config));
-
-	imote2_stargate2_init();
-
-	gpiod_add_lookup_table(&sht15_gpiod_table);
-	platform_add_devices(imote2_devices, ARRAY_SIZE(imote2_devices));
-
-	i2c_register_board_info(0, imote2_i2c_board_info,
-				ARRAY_SIZE(imote2_i2c_board_info));
-	i2c_register_board_info(1, imote2_pwr_i2c_board_info,
-				ARRAY_SIZE(imote2_pwr_i2c_board_info));
-
-	pxa_set_mci_info(&imote2_mci_platform_data);
-	pxa_set_udc_info(&imote2_udc_info);
-}
-#endif
-
-#ifdef CONFIG_MACH_STARGATE2
-
-static unsigned long stargate2_pin_config[] __initdata = {
-
-	GPIO15_nCS_1, /* SRAM */
-	/* SMC91x */
-	GPIO80_nCS_4,
-	GPIO40_GPIO, /*cable detect?*/
-
-	/* Button */
-	GPIO91_GPIO | WAKEUP_ON_LEVEL_HIGH,
-
-	/* Compact Flash */
-	GPIO79_PSKTSEL,
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-	GPIO120_GPIO, /* Buff ctrl */
-	GPIO108_GPIO, /* Power ctrl */
-	GPIO82_GPIO, /* Reset */
-	GPIO53_GPIO, /* SG2_S0_GPIO_DETECT */
-
-	/* MMC not shared with imote2 */
-	GPIO90_GPIO, /* nSD detect */
-	GPIO89_GPIO, /* SD_POWER_ENABLE */
-
-	/* Bluetooth */
-	GPIO81_GPIO, /* reset */
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.name = "smc91x-regs",
-		.start = (PXA_CS4_PHYS + 0x300),
-		.end = (PXA_CS4_PHYS + 0xfffff),
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = PXA_GPIO_TO_IRQ(40),
-		.end = PXA_GPIO_TO_IRQ(40),
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct smc91x_platdata stargate2_smc91x_info = {
-	.flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT
-	| SMC91X_NOWAIT | SMC91X_USE_DMA,
-	.pxa_u16_align4 = true,
-};
-
-static struct platform_device smc91x_device = {
-	.name = "smc91x",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(smc91x_resources),
-	.resource = smc91x_resources,
-	.dev = {
-		.platform_data = &stargate2_smc91x_info,
-	},
-};
-
-
-/*
- * The card detect interrupt isn't debounced so we delay it by 250ms
- * to give the card a chance to fully insert / eject.
- */
-static int stargate2_mci_init(struct device *dev,
-			      irq_handler_t stargate2_detect_int,
-			      void *data)
-{
-	int err;
-
-	err = gpio_request(SG2_SD_POWER_ENABLE, "SG2_sd_power_enable");
-	if (err) {
-		printk(KERN_ERR "Can't get the gpio for SD power control");
-		goto return_err;
-	}
-	gpio_direction_output(SG2_SD_POWER_ENABLE, 0);
-
-	err = gpio_request(SG2_GPIO_nSD_DETECT, "SG2_sd_detect");
-	if (err) {
-		printk(KERN_ERR "Can't get the sd detect gpio");
-		goto free_power_en;
-	}
-	gpio_direction_input(SG2_GPIO_nSD_DETECT);
-
-	err = request_irq(PXA_GPIO_TO_IRQ(SG2_GPIO_nSD_DETECT),
-			  stargate2_detect_int,
-			  IRQ_TYPE_EDGE_BOTH,
-			  "MMC card detect",
-			  data);
-	if (err) {
-		printk(KERN_ERR "can't request MMC card detect IRQ\n");
-		goto free_nsd_detect;
-	}
-	return 0;
-
- free_nsd_detect:
-	gpio_free(SG2_GPIO_nSD_DETECT);
- free_power_en:
-	gpio_free(SG2_SD_POWER_ENABLE);
- return_err:
-	return err;
-}
-
-/**
- * stargate2_mci_setpower() - set state of mmc power supply
- *
- * Very simple control. Either it is on or off and is controlled by
- * a gpio pin */
-static int stargate2_mci_setpower(struct device *dev, unsigned int vdd)
-{
-	gpio_set_value(SG2_SD_POWER_ENABLE, !!vdd);
-	return 0;
-}
-
-static void stargate2_mci_exit(struct device *dev, void *data)
-{
-	free_irq(PXA_GPIO_TO_IRQ(SG2_GPIO_nSD_DETECT), data);
-	gpio_free(SG2_SD_POWER_ENABLE);
-	gpio_free(SG2_GPIO_nSD_DETECT);
-}
-
-static struct pxamci_platform_data stargate2_mci_platform_data = {
-	.detect_delay_ms = 250,
-	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
-	.init = stargate2_mci_init,
-	.setpower = stargate2_mci_setpower,
-	.exit = stargate2_mci_exit,
-};
-
-
-/*
- * SRAM - The Stargate 2 has 32MB of SRAM.
- *
- * Here it is made available as an MTD. This will then
- * typically have a cifs filesystem created on it to provide
- * fast temporary storage.
- */
-static struct resource sram_resources = {
-	.start = PXA_CS1_PHYS,
-	.end = PXA_CS1_PHYS + SZ_32M-1,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platdata_mtd_ram stargate2_sram_pdata = {
-	.mapname = "Stargate2 SRAM",
-	.bankwidth = 2,
-};
-
-static struct platform_device stargate2_sram = {
-	.name = "mtd-ram",
-	.id = 0,
-	.resource = &sram_resources,
-	.num_resources = 1,
-	.dev = {
-		.platform_data = &stargate2_sram_pdata,
-	},
-};
-
-static struct pcf857x_platform_data platform_data_pcf857x = {
-	.gpio_base = 128,
-	.n_latch = 0,
-	.setup = NULL,
-	.teardown = NULL,
-	.context = NULL,
-};
-
-static const struct property_entry pca9500_eeprom_properties[] = {
-	PROPERTY_ENTRY_U32("pagesize", 4),
-	{ }
-};
-
-static const struct software_node pca9500_eeprom_node = {
-	.properties = pca9500_eeprom_properties,
-};
-
-/**
- * stargate2_reset_bluetooth() reset the bluecore to ensure consistent state
- **/
-static int stargate2_reset_bluetooth(void)
-{
-	int err;
-	err = gpio_request(SG2_BT_RESET, "SG2_BT_RESET");
-	if (err) {
-		printk(KERN_ERR "Could not get gpio for bluetooth reset\n");
-		return err;
-	}
-	gpio_direction_output(SG2_BT_RESET, 1);
-	mdelay(5);
-	/* now reset it - 5 msec minimum */
-	gpio_set_value(SG2_BT_RESET, 0);
-	mdelay(10);
-	gpio_set_value(SG2_BT_RESET, 1);
-	gpio_free(SG2_BT_RESET);
-	return 0;
-}
-
-static struct led_info stargate2_leds[] = {
-	{
-		.name = "sg2:red",
-		.flags = DA9030_LED_RATE_ON,
-	}, {
-		.name = "sg2:blue",
-		.flags = DA9030_LED_RATE_ON,
-	}, {
-		.name = "sg2:green",
-		.flags = DA9030_LED_RATE_ON,
-	},
-};
-
-static struct da903x_subdev_info stargate2_da9030_subdevs[] = {
-	{
-		.name = "da903x-led",
-		.id = DA9030_ID_LED_2,
-		.platform_data = &stargate2_leds[0],
-	}, {
-		.name = "da903x-led",
-		.id = DA9030_ID_LED_3,
-		.platform_data = &stargate2_leds[2],
-	}, {
-		.name = "da903x-led",
-		.id = DA9030_ID_LED_4,
-		.platform_data = &stargate2_leds[1],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO2,
-		.platform_data = &stargate2_ldo_init_data[vcc_bbio],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO3,
-		.platform_data = &stargate2_ldo_init_data[vcc_bb],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO4,
-		.platform_data = &stargate2_ldo_init_data[vcc_pxa_flash],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO5,
-		.platform_data = &stargate2_ldo_init_data[vcc_cc2420],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO6,
-		.platform_data = &stargate2_ldo_init_data[vcc_vref],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO7,
-		.platform_data = &stargate2_ldo_init_data[vcc_sram_ext],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO8,
-		.platform_data = &stargate2_ldo_init_data[vcc_mica],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO9,
-		.platform_data = &stargate2_ldo_init_data[vcc_bt],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO10,
-		.platform_data = &stargate2_ldo_init_data[vcc_sensor_1_8],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO11,
-		.platform_data = &stargate2_ldo_init_data[vcc_sensor_3],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO12,
-		.platform_data = &stargate2_ldo_init_data[vcc_lcd],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO15,
-		.platform_data = &stargate2_ldo_init_data[vcc_pxa_pll],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO17,
-		.platform_data = &stargate2_ldo_init_data[vcc_pxa_usim],
-	}, {
-		.name = "da903x-regulator", /*pxa vcc i/o and cc2420 vcc i/o */
-		.id = DA9030_ID_LDO18,
-		.platform_data = &stargate2_ldo_init_data[vcc_io],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO19,
-		.platform_data = &stargate2_ldo_init_data[vcc_pxa_mem],
-	},
-};
-
-static struct da903x_platform_data stargate2_da9030_pdata = {
-	.num_subdevs = ARRAY_SIZE(stargate2_da9030_subdevs),
-	.subdevs = stargate2_da9030_subdevs,
-};
-
-static struct i2c_board_info __initdata stargate2_pwr_i2c_board_info[] = {
-	{
-		.type = "da9030",
-		.addr = 0x49,
-		.platform_data = &stargate2_da9030_pdata,
-		.irq = PXA_GPIO_TO_IRQ(1),
-	},
-};
-
-static struct i2c_board_info __initdata stargate2_i2c_board_info[] = {
-	/* Techically this a pca9500 - but it's compatible with the 8574
-	 * for gpio expansion and the 24c02 for eeprom access.
-	 */
-	{
-		.type = "pcf8574",
-		.addr =  0x27,
-		.platform_data = &platform_data_pcf857x,
-	}, {
-		.type = "24c02",
-		.addr = 0x57,
-		.swnode = &pca9500_eeprom_node,
-	}, {
-		.type = "max1238",
-		.addr = 0x35,
-	}, { /* ITS400 Sensor board only */
-		.type = "max1363",
-		.addr = 0x34,
-		/* Through a nand gate - Also beware, on V2 sensor board the
-		 * pull up resistors are missing.
-		 */
-		.irq = PXA_GPIO_TO_IRQ(99),
-	}, { /* ITS400 Sensor board only */
-		.type = "tsl2561",
-		.addr = 0x49,
-		/* Through a nand gate - Also beware, on V2 sensor board the
-		 * pull up resistors are missing.
-		 */
-		.irq = PXA_GPIO_TO_IRQ(99),
-	}, { /* ITS400 Sensor board only */
-		.type = "tmp175",
-		.addr = 0x4A,
-		.irq = PXA_GPIO_TO_IRQ(96),
-	},
-};
-
-/* Board doesn't support cable detection - so always lie and say
- * something is there.
- */
-static int sg2_udc_detect(void)
-{
-	return 1;
-}
-
-static struct pxa2xx_udc_mach_info stargate2_udc_info __initdata = {
-	.udc_is_connected	= sg2_udc_detect,
-	.udc_command		= sg2_udc_command,
-};
-
-static struct platform_device *stargate2_devices[] = {
-	&stargate2_flash_device,
-	&stargate2_sram,
-	&smc91x_device,
-	&sht15,
-};
-
-static void __init stargate2_init(void)
-{
-	/* This is probably a board specific hack as this must be set
-	   prior to connecting the MFP stuff up. */
-	__raw_writel(__raw_readl(MECR) & ~MECR_NOS, MECR);
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(stargate2_pin_config));
-
-	imote2_stargate2_init();
-
-	gpiod_add_lookup_table(&sht15_gpiod_table);
-	platform_add_devices(ARRAY_AND_SIZE(stargate2_devices));
-
-	i2c_register_board_info(0, ARRAY_AND_SIZE(stargate2_i2c_board_info));
-	i2c_register_board_info(1, stargate2_pwr_i2c_board_info,
-				ARRAY_SIZE(stargate2_pwr_i2c_board_info));
-
-	pxa_set_mci_info(&stargate2_mci_platform_data);
-
-	pxa_set_udc_info(&stargate2_udc_info);
-
-	stargate2_reset_bluetooth();
-}
-#endif
-
-#ifdef CONFIG_MACH_INTELMOTE2
-MACHINE_START(INTELMOTE2, "IMOTE 2")
-	.map_io		= pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= imote2_init,
-	.atag_offset	= 0x100,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_STARGATE2
-MACHINE_START(STARGATE2, "Stargate 2")
-	.map_io = pxa27x_map_io,
-	.nr_irqs = STARGATE_NR_IRQS,
-	.init_irq = pxa27x_init_irq,
-	.handle_irq = pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine = stargate2_init,
-	.atag_offset = 0x100,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 431709725d02..d41641d6cfcd 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -40,16 +40,16 @@
 #include <asm/mach-types.h>
 
 #include "pxa25x.h"
-#include <mach/reset.h>
+#include "reset.h"
 #include <linux/platform_data/irda-pxaficp.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include "udc.h"
 #include "tosa_bt.h"
-#include <mach/audio.h>
-#include <mach/smemc.h>
+#include <linux/platform_data/asoc-pxa.h>
+#include "smemc.h"
 
 #include <asm/mach/arch.h>
-#include <mach/tosa.h>
+#include "tosa.h"
 
 #include <asm/hardware/scoop.h>
 #include <asm/mach/sharpsl_param.h>
@@ -296,9 +296,9 @@ static struct gpiod_lookup_table tosa_mci_gpio_table = {
 	.table = {
 		GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_nSD_DETECT,
 			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_SD_WP,
+		GPIO_LOOKUP("sharp-scoop.0", TOSA_GPIO_SD_WP - TOSA_SCOOP_GPIO_BASE,
 			    "wp", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_PWR_ON,
+		GPIO_LOOKUP("sharp-scoop.0", TOSA_GPIO_PWR_ON - TOSA_SCOOP_GPIO_BASE,
 			    "power", GPIO_ACTIVE_HIGH),
 		{ },
 	},
@@ -616,6 +616,22 @@ static struct resource tc6393xb_resources[] = {
 	},
 };
 
+static struct gpiod_lookup_table tosa_battery_gpio_table = {
+	.dev_id = "wm97xx-battery",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_BAT0_CRG,
+			    "main battery full", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_BAT1_CRG,
+			    "jacket battery full", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_BAT0_LOW,
+			    "main battery low", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_BAT1_LOW,
+			    "jacket battery low", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_JACKET_DETECT,
+			    "jacket detect", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
 
 static int tosa_tc6393xb_enable(struct platform_device *dev)
 {
@@ -662,13 +678,11 @@ err_req_pclr:
 	return rc;
 }
 
-static int tosa_tc6393xb_disable(struct platform_device *dev)
+static void tosa_tc6393xb_disable(struct platform_device *dev)
 {
 	gpio_free(TOSA_GPIO_TC6393XB_L3V_ON);
 	gpio_free(TOSA_GPIO_TC6393XB_SUSPEND);
 	gpio_free(TOSA_GPIO_TC6393XB_REST_IN);
-
-	return 0;
 }
 
 static int tosa_tc6393xb_resume(struct platform_device *dev)
@@ -709,31 +723,6 @@ static struct tmio_nand_data tosa_tc6393xb_nand_config = {
 	.part_parsers = probes,
 };
 
-static int tosa_tc6393xb_setup(struct platform_device *dev)
-{
-	int rc;
-
-	rc = gpio_request(TOSA_GPIO_CARD_VCC_ON, "CARD_VCC_ON");
-	if (rc)
-		goto err_req;
-
-	rc = gpio_direction_output(TOSA_GPIO_CARD_VCC_ON, 1);
-	if (rc)
-		goto err_dir;
-
-	return rc;
-
-err_dir:
-	gpio_free(TOSA_GPIO_CARD_VCC_ON);
-err_req:
-	return rc;
-}
-
-static void tosa_tc6393xb_teardown(struct platform_device *dev)
-{
-	gpio_free(TOSA_GPIO_CARD_VCC_ON);
-}
-
 #ifdef CONFIG_MFD_TC6393XB
 static struct fb_videomode tosa_tc6393xb_lcd_mode[] = {
 	{
@@ -778,9 +767,6 @@ static struct tc6393xb_platform_data tosa_tc6393xb_data = {
 	.scr_gper	= 0x3300,
 
 	.irq_base	= IRQ_BOARD_START,
-	.gpio_base	= TOSA_TC6393XB_GPIO_BASE,
-	.setup		= tosa_tc6393xb_setup,
-	.teardown	= tosa_tc6393xb_teardown,
 
 	.enable		= tosa_tc6393xb_enable,
 	.disable	= tosa_tc6393xb_disable,
@@ -821,26 +807,6 @@ static struct pxa2xx_spi_controller pxa_ssp_master_info = {
 	.num_chipselect	= 1,
 };
 
-static struct gpiod_lookup_table tosa_lcd_gpio_table = {
-	.dev_id = "spi2.0",
-	.table = {
-		GPIO_LOOKUP("tc6393xb",
-			    TOSA_GPIO_TG_ON - TOSA_TC6393XB_GPIO_BASE,
-			    "tg #pwr", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table tosa_lcd_bl_gpio_table = {
-	.dev_id = "i2c-tosa-bl",
-	.table = {
-		GPIO_LOOKUP("tc6393xb",
-			    TOSA_GPIO_BL_C20MA - TOSA_TC6393XB_GPIO_BASE,
-			    "backlight", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
 static struct spi_board_info spi_board_info[] __initdata = {
 	{
 		.modalias	= "tosa-lcd",
@@ -943,6 +909,8 @@ static void __init tosa_init(void)
 	/* enable batt_fault */
 	PMCR = 0x01;
 
+	gpiod_add_lookup_table(&tosa_battery_gpio_table);
+
 	gpiod_add_lookup_table(&tosa_mci_gpio_table);
 	pxa_set_mci_info(&tosa_mci_platform_data);
 	pxa_set_ficp_info(&tosa_ficp_platform_data);
@@ -951,8 +919,6 @@ static void __init tosa_init(void)
 	platform_scoop_config = &tosa_pcmcia_config;
 
 	pxa2xx_set_spi_info(2, &pxa_ssp_master_info);
-	gpiod_add_lookup_table(&tosa_lcd_gpio_table);
-	gpiod_add_lookup_table(&tosa_lcd_bl_gpio_table);
 	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
 
 	clk_add_alias("CLK_CK3P6MI", tc6393xb_device.name, "GPIO11_CLK", NULL);
diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/tosa.h
index 8bfaca3a8b64..3b3efa0a0e22 100644
--- a/arch/arm/mach-pxa/include/mach/tosa.h
+++ b/arch/arm/mach-pxa/tosa.h
@@ -55,24 +55,6 @@
 #define TOSA_SCOOP_JC_IO_DIR (TOSA_SCOOP_JC_CARD_LIMIT_SEL)
 
 /*
- * TC6393XB GPIOs
- */
-#define TOSA_TC6393XB_GPIO_BASE		(PXA_NR_BUILTIN_GPIO + 2 * 12)
-
-#define TOSA_GPIO_TG_ON			(TOSA_TC6393XB_GPIO_BASE + 0)
-#define TOSA_GPIO_L_MUTE		(TOSA_TC6393XB_GPIO_BASE + 1)
-#define TOSA_GPIO_BL_C20MA		(TOSA_TC6393XB_GPIO_BASE + 3)
-#define TOSA_GPIO_CARD_VCC_ON		(TOSA_TC6393XB_GPIO_BASE + 4)
-#define TOSA_GPIO_CHARGE_OFF		(TOSA_TC6393XB_GPIO_BASE + 6)
-#define TOSA_GPIO_CHARGE_OFF_JC		(TOSA_TC6393XB_GPIO_BASE + 7)
-#define TOSA_GPIO_BAT0_V_ON		(TOSA_TC6393XB_GPIO_BASE + 9)
-#define TOSA_GPIO_BAT1_V_ON		(TOSA_TC6393XB_GPIO_BASE + 10)
-#define TOSA_GPIO_BU_CHRG_ON		(TOSA_TC6393XB_GPIO_BASE + 11)
-#define TOSA_GPIO_BAT_SW_ON		(TOSA_TC6393XB_GPIO_BASE + 12)
-#define TOSA_GPIO_BAT0_TH_ON		(TOSA_TC6393XB_GPIO_BASE + 14)
-#define TOSA_GPIO_BAT1_TH_ON		(TOSA_TC6393XB_GPIO_BASE + 15)
-
-/*
  * PXA GPIOs
  */
 #define TOSA_GPIO_POWERON		(0)
diff --git a/arch/arm/mach-pxa/trizeps4-pcmcia.c b/arch/arm/mach-pxa/trizeps4-pcmcia.c
new file mode 100644
index 000000000000..25e363770565
--- /dev/null
+++ b/arch/arm/mach-pxa/trizeps4-pcmcia.c
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * linux/drivers/pcmcia/pxa2xx_trizeps4.c
+ *
+ * TRIZEPS PCMCIA specific routines.
+ *
+ * Author:	Jürgen Schindele
+ * Created:	20 02, 2006
+ * Copyright:	Jürgen Schindele
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include "pxa2xx-regs.h"
+#include "trizeps4.h"
+
+#include <pcmcia/soc_common.h>
+
+extern void board_pcmcia_power(int power);
+
+static int trizeps_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+	/* we dont have voltage/card/ready detection
+	 * so we dont need interrupts for it
+	 */
+	switch (skt->nr) {
+	case 0:
+		skt->stat[SOC_STAT_CD].gpio = GPIO_PCD;
+		skt->stat[SOC_STAT_CD].name = "cs0_cd";
+		skt->stat[SOC_STAT_RDY].gpio = GPIO_PRDY;
+		skt->stat[SOC_STAT_RDY].name = "cs0_rdy";
+		break;
+	default:
+		break;
+	}
+	/* release the reset of this card */
+	pr_debug("%s: sock %d irq %d\n", __func__, skt->nr, skt->socket.pci_irq);
+
+	return 0;
+}
+
+static unsigned long trizeps_pcmcia_status[2];
+
+static void trizeps_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+				struct pcmcia_state *state)
+{
+	unsigned short status = 0, change;
+	status = CFSR_readw();
+	change = (status ^ trizeps_pcmcia_status[skt->nr]) &
+				ConXS_CFSR_BVD_MASK;
+	if (change) {
+		trizeps_pcmcia_status[skt->nr] = status;
+		if (status & ConXS_CFSR_BVD1) {
+			/* enable_irq empty */
+		} else {
+			/* disable_irq empty */
+		}
+	}
+
+	switch (skt->nr) {
+	case 0:
+		/* just fill in fix states */
+		state->bvd1   = (status & ConXS_CFSR_BVD1) ? 1 : 0;
+		state->bvd2   = (status & ConXS_CFSR_BVD2) ? 1 : 0;
+		state->vs_3v  = (status & ConXS_CFSR_VS1) ? 0 : 1;
+		state->vs_Xv  = (status & ConXS_CFSR_VS2) ? 0 : 1;
+		break;
+
+#ifndef CONFIG_MACH_TRIZEPS_CONXS
+	/* on ConXS we only have one slot. Second is inactive */
+	case 1:
+		state->detect = 0;
+		state->ready  = 0;
+		state->bvd1   = 0;
+		state->bvd2   = 0;
+		state->vs_3v  = 0;
+		state->vs_Xv  = 0;
+		break;
+
+#endif
+	}
+}
+
+static int trizeps_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+				const socket_state_t *state)
+{
+	int ret = 0;
+	unsigned short power = 0;
+
+	/* we do nothing here just check a bit */
+	switch (state->Vcc) {
+	case 0:  power &= 0xfc; break;
+	case 33: power |= ConXS_BCR_S0_VCC_3V3; break;
+	case 50:
+		pr_err("%s(): Vcc 5V not supported in socket\n", __func__);
+		break;
+	default:
+		pr_err("%s(): bad Vcc %u\n", __func__, state->Vcc);
+		ret = -1;
+	}
+
+	switch (state->Vpp) {
+	case 0:  power &= 0xf3; break;
+	case 33: power |= ConXS_BCR_S0_VPP_3V3; break;
+	case 120:
+		pr_err("%s(): Vpp 12V not supported in socket\n", __func__);
+		break;
+	default:
+		if (state->Vpp != state->Vcc) {
+			pr_err("%s(): bad Vpp %u\n", __func__, state->Vpp);
+			ret = -1;
+		}
+	}
+
+	switch (skt->nr) {
+	case 0:			 /* we only have 3.3V */
+		board_pcmcia_power(power);
+		break;
+
+#ifndef CONFIG_MACH_TRIZEPS_CONXS
+	/* on ConXS we only have one slot. Second is inactive */
+	case 1:
+#endif
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+static void trizeps_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
+{
+	/* default is on */
+	board_pcmcia_power(0x9);
+}
+
+static void trizeps_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
+{
+	board_pcmcia_power(0x0);
+}
+
+static struct pcmcia_low_level trizeps_pcmcia_ops = {
+	.owner			= THIS_MODULE,
+	.hw_init		= trizeps_pcmcia_hw_init,
+	.socket_state		= trizeps_pcmcia_socket_state,
+	.configure_socket	= trizeps_pcmcia_configure_socket,
+	.socket_init		= trizeps_pcmcia_socket_init,
+	.socket_suspend		= trizeps_pcmcia_socket_suspend,
+#ifdef CONFIG_MACH_TRIZEPS_CONXS
+	.nr			= 1,
+#else
+	.nr			= 2,
+#endif
+	.first			= 0,
+};
+
+static struct platform_device *trizeps_pcmcia_device;
+
+static int __init trizeps_pcmcia_init(void)
+{
+	int ret;
+
+	if (!machine_is_trizeps4() && !machine_is_trizeps4wl())
+		return -ENODEV;
+
+	trizeps_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+	if (!trizeps_pcmcia_device)
+		return -ENOMEM;
+
+	ret = platform_device_add_data(trizeps_pcmcia_device,
+			&trizeps_pcmcia_ops, sizeof(trizeps_pcmcia_ops));
+
+	if (ret == 0)
+		ret = platform_device_add(trizeps_pcmcia_device);
+
+	if (ret)
+		platform_device_put(trizeps_pcmcia_device);
+
+	return ret;
+}
+
+static void __exit trizeps_pcmcia_exit(void)
+{
+	platform_device_unregister(trizeps_pcmcia_device);
+}
+
+fs_initcall(trizeps_pcmcia_init);
+module_exit(trizeps_pcmcia_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Juergen Schindele");
+MODULE_ALIAS("platform:pxa2xx-pcmcia");
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index f76f8be09554..716cce885379 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -40,13 +40,13 @@
 #include <asm/mach/flash.h>
 
 #include "pxa27x.h"
-#include <mach/trizeps4.h>
-#include <mach/audio.h>
+#include "trizeps4.h"
+#include <linux/platform_data/asoc-pxa.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/irda-pxaficp.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <mach/smemc.h>
+#include "smemc.h"
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/include/mach/trizeps4.h b/arch/arm/mach-pxa/trizeps4.h
index 3cddb1428c5e..b6c19d155ef9 100644
--- a/arch/arm/mach-pxa/include/mach/trizeps4.h
+++ b/arch/arm/mach-pxa/trizeps4.h
@@ -11,6 +11,7 @@
 #ifndef _TRIPEPS4_H_
 #define _TRIPEPS4_H_
 
+#include "addr-map.h"
 #include "irqs.h" /* PXA_GPIO_TO_IRQ */
 
 /* physical memory regions */
diff --git a/arch/arm/mach-pxa/viper-pcmcia.c b/arch/arm/mach-pxa/viper-pcmcia.c
new file mode 100644
index 000000000000..26599dcc49b3
--- /dev/null
+++ b/arch/arm/mach-pxa/viper-pcmcia.c
@@ -0,0 +1,180 @@
+/*
+ * Viper/Zeus PCMCIA support
+ *   Copyright 2004 Arcom Control Systems
+ *
+ * Maintained by Marc Zyngier <maz@misterjones.org>
+ *
+ * Based on:
+ *   iPAQ h2200 PCMCIA support
+ *   Copyright 2004 Koen Kooi <koen@vestingbar.nl>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <pcmcia/ss.h>
+#include <pcmcia/soc_common.h>
+
+#include <asm/irq.h>
+
+#include "viper-pcmcia.h"
+
+static struct platform_device *arcom_pcmcia_dev;
+
+static inline struct arcom_pcmcia_pdata *viper_get_pdata(void)
+{
+	return arcom_pcmcia_dev->dev.platform_data;
+}
+
+static int viper_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+	struct arcom_pcmcia_pdata *pdata = viper_get_pdata();
+	unsigned long flags;
+
+	skt->stat[SOC_STAT_CD].gpio = pdata->cd_gpio;
+	skt->stat[SOC_STAT_CD].name = "PCMCIA_CD";
+	skt->stat[SOC_STAT_RDY].gpio = pdata->rdy_gpio;
+	skt->stat[SOC_STAT_RDY].name = "CF ready";
+
+	if (gpio_request(pdata->pwr_gpio, "CF power"))
+		goto err_request_pwr;
+
+	local_irq_save(flags);
+
+	if (gpio_direction_output(pdata->pwr_gpio, 0)) {
+		local_irq_restore(flags);
+		goto err_dir;
+	}
+
+	local_irq_restore(flags);
+
+	return 0;
+
+err_dir:
+	gpio_free(pdata->pwr_gpio);
+err_request_pwr:
+	dev_err(&arcom_pcmcia_dev->dev, "Failed to setup PCMCIA GPIOs\n");
+	return -1;
+}
+
+/*
+ * Release all resources.
+ */
+static void viper_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
+{
+	struct arcom_pcmcia_pdata *pdata = viper_get_pdata();
+
+	gpio_free(pdata->pwr_gpio);
+}
+
+static void viper_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+				      struct pcmcia_state *state)
+{
+	state->vs_3v  = 1; /* Can only apply 3.3V */
+	state->vs_Xv  = 0;
+}
+
+static int viper_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+					 const socket_state_t *state)
+{
+	struct arcom_pcmcia_pdata *pdata = viper_get_pdata();
+
+	/* Silently ignore Vpp, output enable, speaker enable. */
+	pdata->reset(state->flags & SS_RESET);
+
+	/* Apply socket voltage */
+	switch (state->Vcc) {
+	case 0:
+		gpio_set_value(pdata->pwr_gpio, 0);
+		break;
+	case 33:
+		gpio_set_value(pdata->pwr_gpio, 1);
+		break;
+	default:
+		dev_err(&arcom_pcmcia_dev->dev, "Unsupported Vcc:%d\n", state->Vcc);
+		return -1;
+	}
+
+	return 0;
+}
+
+static struct pcmcia_low_level viper_pcmcia_ops = {
+	.owner          	= THIS_MODULE,
+	.hw_init        	= viper_pcmcia_hw_init,
+	.hw_shutdown		= viper_pcmcia_hw_shutdown,
+	.socket_state		= viper_pcmcia_socket_state,
+	.configure_socket	= viper_pcmcia_configure_socket,
+	.nr         		= 1,
+};
+
+static struct platform_device *viper_pcmcia_device;
+
+static int viper_pcmcia_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	/* I can't imagine more than one device, but you never know... */
+	if (arcom_pcmcia_dev)
+		return -EEXIST;
+
+	if (!pdev->dev.platform_data)
+		return -EINVAL;
+
+	viper_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+	if (!viper_pcmcia_device)
+		return -ENOMEM;
+
+	arcom_pcmcia_dev = pdev;
+
+	viper_pcmcia_device->dev.parent = &pdev->dev;
+
+	ret = platform_device_add_data(viper_pcmcia_device,
+				       &viper_pcmcia_ops,
+				       sizeof(viper_pcmcia_ops));
+
+	if (!ret)
+		ret = platform_device_add(viper_pcmcia_device);
+
+	if (ret) {
+		platform_device_put(viper_pcmcia_device);
+		arcom_pcmcia_dev = NULL;
+	}
+
+	return ret;
+}
+
+static int viper_pcmcia_remove(struct platform_device *pdev)
+{
+	platform_device_unregister(viper_pcmcia_device);
+	arcom_pcmcia_dev = NULL;
+	return 0;
+}
+
+static struct platform_device_id viper_pcmcia_id_table[] = {
+	{ .name = "viper-pcmcia", },
+	{ .name = "zeus-pcmcia",  },
+	{ },
+};
+
+static struct platform_driver viper_pcmcia_driver = {
+	.probe		= viper_pcmcia_probe,
+	.remove		= viper_pcmcia_remove,
+	.driver		= {
+		.name	= "arcom-pcmcia",
+	},
+	.id_table	= viper_pcmcia_id_table,
+};
+
+module_platform_driver(viper_pcmcia_driver);
+
+MODULE_DEVICE_TABLE(platform, viper_pcmcia_id_table);
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-pxa/viper-pcmcia.h b/arch/arm/mach-pxa/viper-pcmcia.h
new file mode 100644
index 000000000000..a23b58aff9e1
--- /dev/null
+++ b/arch/arm/mach-pxa/viper-pcmcia.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ARCOM_PCMCIA_H
+#define __ARCOM_PCMCIA_H
+
+struct arcom_pcmcia_pdata {
+	int	cd_gpio;
+	int	rdy_gpio;
+	int	pwr_gpio;
+	void	(*reset)(int state);
+};
+
+#endif
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 3aa34e9a15d3..5b43351ee840 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -46,10 +46,10 @@
 #include <linux/syscore_ops.h>
 
 #include "pxa25x.h"
-#include <mach/audio.h>
+#include <linux/platform_data/asoc-pxa.h>
 #include <linux/platform_data/video-pxafb.h>
-#include <mach/regs-uart.h>
-#include <linux/platform_data/pcmcia-pxa2xx_viper.h>
+#include "regs-uart.h"
+#include "viper-pcmcia.h"
 #include "viper.h"
 
 #include <asm/setup.h>
@@ -851,7 +851,7 @@ static void __init viper_init_vcore_gpios(void)
 		goto err_dir;
 
 	/* c/should assume redboot set the correct level ??? */
-	viper_set_core_cpu_voltage(get_clk_frequency_khz(0), 1);
+	viper_set_core_cpu_voltage(pxa25x_get_clk_frequency_khz(0), 1);
 
 	return;
 
@@ -998,6 +998,18 @@ static struct map_desc viper_io_desc[] __initdata = {
 		.length  = 0x00800000,
 		.type    = MT_DEVICE,
 	},
+	{
+		/*
+		 * ISA I/O space mapping:
+		 * -  ports 0x0000-0x0fff are PC/104
+		 * -  ports 0x10000-0x10fff are PCMCIA slot 1
+		 * -  ports 0x11000-0x11fff are PC/104
+		 */
+		.virtual = PCI_IO_VIRT_BASE,
+		.pfn     = __phys_to_pfn(0x30000000),
+		.length  = 0x1000,
+		.type    = MT_DEVICE,
+	},
 };
 
 static void __init viper_map_io(void)
diff --git a/arch/arm/mach-pxa/vpac270-pcmcia.c b/arch/arm/mach-pxa/vpac270-pcmcia.c
new file mode 100644
index 000000000000..9fd990c8a5fb
--- /dev/null
+++ b/arch/arm/mach-pxa/vpac270-pcmcia.c
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * linux/drivers/pcmcia/pxa2xx_vpac270.c
+ *
+ * Driver for Voipac PXA270 PCMCIA and CF sockets
+ *
+ * Copyright (C) 2010-2011 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+
+#include "vpac270.h"
+
+#include <pcmcia/soc_common.h>
+
+static struct gpio vpac270_pcmcia_gpios[] = {
+	{ GPIO107_VPAC270_PCMCIA_PPEN,	GPIOF_INIT_LOW,	"PCMCIA PPEN" },
+	{ GPIO11_VPAC270_PCMCIA_RESET,	GPIOF_INIT_LOW,	"PCMCIA Reset" },
+};
+
+static struct gpio vpac270_cf_gpios[] = {
+	{ GPIO16_VPAC270_CF_RESET,	GPIOF_INIT_LOW,	"CF Reset" },
+};
+
+static int vpac270_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+	int ret;
+
+	if (skt->nr == 0) {
+		ret = gpio_request_array(vpac270_pcmcia_gpios,
+				ARRAY_SIZE(vpac270_pcmcia_gpios));
+
+		skt->stat[SOC_STAT_CD].gpio = GPIO84_VPAC270_PCMCIA_CD;
+		skt->stat[SOC_STAT_CD].name = "PCMCIA CD";
+		skt->stat[SOC_STAT_RDY].gpio = GPIO35_VPAC270_PCMCIA_RDY;
+		skt->stat[SOC_STAT_RDY].name = "PCMCIA Ready";
+	} else {
+		ret = gpio_request_array(vpac270_cf_gpios,
+				ARRAY_SIZE(vpac270_cf_gpios));
+
+		skt->stat[SOC_STAT_CD].gpio = GPIO17_VPAC270_CF_CD;
+		skt->stat[SOC_STAT_CD].name = "CF CD";
+		skt->stat[SOC_STAT_RDY].gpio = GPIO12_VPAC270_CF_RDY;
+		skt->stat[SOC_STAT_RDY].name = "CF Ready";
+	}
+
+	return ret;
+}
+
+static void vpac270_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
+{
+	if (skt->nr == 0)
+		gpio_free_array(vpac270_pcmcia_gpios,
+					ARRAY_SIZE(vpac270_pcmcia_gpios));
+	else
+		gpio_free_array(vpac270_cf_gpios,
+					ARRAY_SIZE(vpac270_cf_gpios));
+}
+
+static void vpac270_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+					struct pcmcia_state *state)
+{
+	state->vs_3v  = 1;
+	state->vs_Xv  = 0;
+}
+
+static int
+vpac270_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+				const socket_state_t *state)
+{
+	if (skt->nr == 0) {
+		gpio_set_value(GPIO11_VPAC270_PCMCIA_RESET,
+			(state->flags & SS_RESET));
+		gpio_set_value(GPIO107_VPAC270_PCMCIA_PPEN,
+			!(state->Vcc == 33 || state->Vcc == 50));
+	} else {
+		gpio_set_value(GPIO16_VPAC270_CF_RESET,
+			(state->flags & SS_RESET));
+	}
+
+	return 0;
+}
+
+static struct pcmcia_low_level vpac270_pcmcia_ops = {
+	.owner			= THIS_MODULE,
+
+	.first			= 0,
+	.nr			= 2,
+
+	.hw_init		= vpac270_pcmcia_hw_init,
+	.hw_shutdown		= vpac270_pcmcia_hw_shutdown,
+
+	.socket_state		= vpac270_pcmcia_socket_state,
+	.configure_socket	= vpac270_pcmcia_configure_socket,
+};
+
+static struct platform_device *vpac270_pcmcia_device;
+
+static int __init vpac270_pcmcia_init(void)
+{
+	int ret;
+
+	if (!machine_is_vpac270())
+		return -ENODEV;
+
+	vpac270_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+	if (!vpac270_pcmcia_device)
+		return -ENOMEM;
+
+	ret = platform_device_add_data(vpac270_pcmcia_device,
+		&vpac270_pcmcia_ops, sizeof(vpac270_pcmcia_ops));
+
+	if (!ret)
+		ret = platform_device_add(vpac270_pcmcia_device);
+
+	if (ret)
+		platform_device_put(vpac270_pcmcia_device);
+
+	return ret;
+}
+
+static void __exit vpac270_pcmcia_exit(void)
+{
+	platform_device_unregister(vpac270_pcmcia_device);
+}
+
+module_init(vpac270_pcmcia_init);
+module_exit(vpac270_pcmcia_exit);
+
+MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("PCMCIA support for Voipac PXA270");
+MODULE_ALIAS("platform:pxa2xx-pcmcia");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index 14505e83479e..8f74bafcf1f9 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -29,8 +29,8 @@
 #include <asm/mach/arch.h>
 
 #include "pxa27x.h"
-#include <mach/audio.h>
-#include <mach/vpac270.h>
+#include <linux/platform_data/asoc-pxa.h>
+#include "vpac270.h"
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
diff --git a/arch/arm/mach-pxa/include/mach/vpac270.h b/arch/arm/mach-pxa/vpac270.h
index 0cd094d8c553..0cd094d8c553 100644
--- a/arch/arm/mach-pxa/include/mach/vpac270.h
+++ b/arch/arm/mach-pxa/vpac270.h
diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c
index f485146b899f..6bb02b65fb82 100644
--- a/arch/arm/mach-pxa/xcep.c
+++ b/arch/arm/mach-pxa/xcep.c
@@ -24,9 +24,9 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
 
-#include <mach/hardware.h>
 #include "pxa25x.h"
-#include <mach/smemc.h>
+#include "addr-map.h"
+#include "smemc.h"
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index 8e74fbb0a96e..c4d4162a7e6e 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -34,7 +34,7 @@
 
 #include "pxa27x.h"
 #include "mfp-pxa27x.h"
-#include <mach/z2.h>
+#include "z2.h"
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/keypad-pxa27x.h>
@@ -570,7 +570,6 @@ static struct pxa2xx_spi_chip z2_lbs_chip_info = {
 	.rx_threshold	= 8,
 	.tx_threshold	= 8,
 	.timeout	= 1000,
-	.gpio_cs	= GPIO24_ZIPITZ2_WIFI_CS,
 };
 
 static struct libertas_spi_platform_data z2_lbs_pdata = {
@@ -584,7 +583,6 @@ static struct pxa2xx_spi_chip lms283_chip_info = {
 	.rx_threshold	= 1,
 	.tx_threshold	= 1,
 	.timeout	= 64,
-	.gpio_cs	= GPIO88_ZIPITZ2_LCD_CS,
 };
 
 static struct gpiod_lookup_table lms283_gpio_table = {
@@ -624,8 +622,26 @@ static struct pxa2xx_spi_controller pxa_ssp2_master_info = {
 	.num_chipselect	= 1,
 };
 
+static struct gpiod_lookup_table pxa_ssp1_gpio_table = {
+	.dev_id = "spi1",
+	.table = {
+		GPIO_LOOKUP_IDX("gpio-pxa", GPIO24_ZIPITZ2_WIFI_CS, "cs", 0, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table pxa_ssp2_gpio_table = {
+	.dev_id = "spi2",
+	.table = {
+		GPIO_LOOKUP_IDX("gpio-pxa", GPIO88_ZIPITZ2_LCD_CS, "cs", 0, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static void __init z2_spi_init(void)
 {
+	gpiod_add_lookup_table(&pxa_ssp1_gpio_table);
+	gpiod_add_lookup_table(&pxa_ssp2_gpio_table);
 	pxa2xx_set_spi_info(1, &pxa_ssp1_master_info);
 	pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
 	gpiod_add_lookup_table(&lms283_gpio_table);
@@ -635,6 +651,15 @@ static void __init z2_spi_init(void)
 static inline void z2_spi_init(void) {}
 #endif
 
+static struct gpiod_lookup_table z2_audio_gpio_table = {
+	.dev_id = "soc-audio",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", GPIO37_ZIPITZ2_HEADSET_DETECT,
+			    "hsdet-gpio", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 /******************************************************************************
  * Core power regulator
  ******************************************************************************/
@@ -739,6 +764,8 @@ static void __init z2_init(void)
 	z2_keys_init();
 	z2_pmic_init();
 
+	gpiod_add_lookup_table(&z2_audio_gpio_table);
+
 	pm_power_off = z2_power_off;
 }
 
diff --git a/arch/arm/mach-pxa/include/mach/z2.h b/arch/arm/mach-pxa/z2.h
index a78b2e28b1db..a78b2e28b1db 100644
--- a/arch/arm/mach-pxa/include/mach/z2.h
+++ b/arch/arm/mach-pxa/z2.h
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 97700429633e..ff0d8bb9f557 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -39,17 +39,17 @@
 
 #include "pxa27x.h"
 #include "devices.h"
-#include <mach/regs-uart.h>
+#include "regs-uart.h"
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include "pxa27x-udc.h"
 #include "udc.h"
 #include <linux/platform_data/video-pxafb.h>
 #include "pm.h"
-#include <mach/audio.h>
-#include <linux/platform_data/pcmcia-pxa2xx_viper.h>
+#include <linux/platform_data/asoc-pxa.h>
+#include "viper-pcmcia.h"
 #include "zeus.h"
-#include <mach/smemc.h>
+#include "smemc.h"
 
 #include "generic.h"
 
@@ -929,6 +929,18 @@ static struct map_desc zeus_io_desc[] __initdata = {
 		.length  = 0x00800000,
 		.type    = MT_DEVICE,
 	},
+	{
+		/*
+		 * ISA I/O space mapping:
+		 * -  ports 0x0000-0x0fff are PC/104
+		 * -  ports 0x10000-0x10fff are PCMCIA slot 1
+		 * -  ports 0x11000-0x11fff are PC/104
+		 */
+		.virtual = PCI_IO_VIRT_BASE,
+		.pfn     = __phys_to_pfn(ZEUS_PC104IO_PHYS),
+		.length  = 0x1000,
+		.type    = MT_DEVICE,
+	},
 };
 
 static void __init zeus_map_io(void)
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 79f0025fa17a..8ed75ac29b1a 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -20,17 +20,19 @@
 #include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/smc91x.h>
+#include <linux/soc/pxa/cpu.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include "pxa3xx.h"
-#include <mach/audio.h>
+#include <linux/platform_data/asoc-pxa.h>
 #include <linux/platform_data/video-pxafb.h>
 #include "zylonite.h"
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <linux/platform_data/keypad-pxa27x.h>
 #include <linux/platform_data/mtd-nand-pxa3xx.h>
+#include "mfp.h"
 
 #include "devices.h"
 #include "generic.h"
@@ -424,6 +426,35 @@ static void __init zylonite_init_ohci(void)
 static inline void zylonite_init_ohci(void) {}
 #endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */
 
+static struct gpiod_lookup_table zylonite_wm97xx_touch_gpio15_table = {
+	.dev_id = "wm97xx-touch.0",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", mfp_to_gpio(MFP_PIN_GPIO15),
+			    "touch", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table zylonite_wm97xx_touch_gpio26_table = {
+	.dev_id = "wm97xx-touch.0",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", mfp_to_gpio(MFP_PIN_GPIO26),
+			    "touch", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
+static void __init zylonite_init_wm97xx_touch(void)
+{
+	if (!IS_ENABLED(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE))
+		return;
+
+	if (cpu_is_pxa320())
+		gpiod_add_lookup_table(&zylonite_wm97xx_touch_gpio15_table);
+	else
+		gpiod_add_lookup_table(&zylonite_wm97xx_touch_gpio26_table);
+}
+
 static void __init zylonite_init(void)
 {
 	pxa_set_ffuart_info(NULL);
@@ -449,6 +480,7 @@ static void __init zylonite_init(void)
 	zylonite_init_nand();
 	zylonite_init_leds();
 	zylonite_init_ohci();
+	zylonite_init_wm97xx_touch();
 }
 
 MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
diff --git a/arch/arm/mach-pxa/zylonite.h b/arch/arm/mach-pxa/zylonite.h
index 7300ec2aac0d..afe3efcb8e04 100644
--- a/arch/arm/mach-pxa/zylonite.h
+++ b/arch/arm/mach-pxa/zylonite.h
@@ -2,6 +2,8 @@
 #ifndef __ASM_ARCH_ZYLONITE_H
 #define __ASM_ARCH_ZYLONITE_H
 
+#include <linux/soc/pxa/cpu.h>
+
 #define ZYLONITE_ETH_PHYS	0x14000000
 
 #define EXT_GPIO(x)		(128 + (x))
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index 956fec1c4940..50a8a3547dbc 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -17,6 +17,7 @@
 #include <linux/platform_data/i2c-pxa.h>
 #include <linux/platform_data/pca953x.h>
 #include <linux/gpio.h>
+#include <linux/soc/pxa/cpu.h>
 
 #include "pxa300.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index 94cb834f36cd..67cab4f1194b 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -14,6 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
+#include <linux/soc/pxa/cpu.h>
 
 #include "pxa320.h"
 #include "zylonite.h"
diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig
index 466acc4a5e0c..12a812e61c16 100644
--- a/arch/arm/mach-qcom/Kconfig
+++ b/arch/arm/mach-qcom/Kconfig
@@ -2,7 +2,6 @@
 menuconfig ARCH_QCOM
 	bool "Qualcomm Support"
 	depends on ARCH_MULTI_V7
-	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_GIC
 	select ARM_AMBA
 	select PINCTRL
@@ -21,6 +20,10 @@ config ARCH_MSM8X60
 	bool "Enable support for MSM8X60"
 	select CLKSRC_QCOM
 
+config ARCH_MSM8909
+	bool "Enable support for MSM8909"
+	select HAVE_ARM_ARCH_TIMER
+
 config ARCH_MSM8916
 	bool "Enable support for MSM8916"
 	select HAVE_ARM_ARCH_TIMER
diff --git a/arch/arm/mach-qcom/platsmp.c b/arch/arm/mach-qcom/platsmp.c
index 58a4228455ce..5d2f386a46d8 100644
--- a/arch/arm/mach-qcom/platsmp.c
+++ b/arch/arm/mach-qcom/platsmp.c
@@ -357,8 +357,7 @@ static void __init qcom_smp_prepare_cpus(unsigned int max_cpus)
 {
 	int cpu;
 
-	if (qcom_scm_set_cold_boot_addr(secondary_startup_arm,
-					cpu_present_mask)) {
+	if (qcom_scm_set_cold_boot_addr(secondary_startup_arm)) {
 		for_each_present_cpu(cpu) {
 			if (cpu == smp_processor_id())
 				continue;
@@ -385,6 +384,7 @@ static const struct smp_operations qcom_smp_cortex_a7_ops __initconst = {
 #endif
 };
 CPU_METHOD_OF_DECLARE(qcom_smp_msm8226, "qcom,msm8226-smp", &qcom_smp_cortex_a7_ops);
+CPU_METHOD_OF_DECLARE(qcom_smp_msm8909, "qcom,msm8909-smp", &qcom_smp_cortex_a7_ops);
 CPU_METHOD_OF_DECLARE(qcom_smp_msm8916, "qcom,msm8916-smp", &qcom_smp_cortex_a7_ops);
 
 static const struct smp_operations qcom_smp_kpssv1_ops __initconst = {
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
deleted file mode 100644
index a4c36024b5e8..000000000000
--- a/arch/arm/mach-realview/Kconfig
+++ /dev/null
@@ -1,103 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-menuconfig ARCH_REALVIEW
-	bool "ARM Ltd. RealView family"
-	depends on ARCH_MULTI_V5 || ARCH_MULTI_V6 || ARCH_MULTI_V7
-	select ARM_AMBA
-	select ARM_GIC
-	select ARM_TIMER_SP804
-	select CLK_SP810
-	select GPIO_PL061 if GPIOLIB
-	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if SMP
-	select HAVE_PATA_PLATFORM
-	select HAVE_TCM
-	select CLK_ICST
-	select MACH_REALVIEW_EB if ARCH_MULTI_V5
-	select MFD_SYSCON
-	select PLAT_VERSATILE
-	select POWER_RESET
-	select POWER_RESET_VERSATILE
-	select POWER_SUPPLY
-	select SOC_REALVIEW
-	help
-	  This enables support for ARM Ltd RealView boards.
-
-if ARCH_REALVIEW
-
-config MACH_REALVIEW_EB
-	bool "Support RealView(R) Emulation Baseboard"
-	select ARM_GIC
-	select CPU_ARM926T if ARCH_MULTI_V5
-	help
-	  Include support for the ARM(R) RealView(R) Emulation Baseboard
-	  platform. On an ARMv5 kernel, this will include support for
-	  the ARM926EJ-S core tile, while on an ARMv6/v7 kernel, at least
-	  one of the ARM1136, ARM1176, ARM11MPCore or Cortex-A9MPCore
-	  core tile options should be enabled.
-
-config REALVIEW_EB_ARM1136
-	bool "Support ARM1136J(F)-S Tile"
-	depends on MACH_REALVIEW_EB && ARCH_MULTI_V6
-	select CPU_V6
-	help
-	  Enable support for the ARM1136 tile fitted to the
-	  Realview(R) Emulation Baseboard platform.
-
-config REALVIEW_EB_ARM1176
-	bool "Support ARM1176JZ(F)-S Tile"
-	depends on MACH_REALVIEW_EB && ARCH_MULTI_V6
-	help
-	  Enable support for the ARM1176 tile fitted to the
-	  Realview(R) Emulation Baseboard platform.
-
-config REALVIEW_EB_A9MP
-	bool "Support Multicore Cortex-A9 Tile"
-	depends on MACH_REALVIEW_EB && ARCH_MULTI_V7
-	help
-	  Enable support for the Cortex-A9MPCore tile fitted to the
-	  Realview(R) Emulation Baseboard platform.
-
-config REALVIEW_EB_ARM11MP
-	bool "Support ARM11MPCore Tile"
-	depends on MACH_REALVIEW_EB && ARCH_MULTI_V6
-	select HAVE_SMP
-	help
-	  Enable support for the ARM11MPCore tile fitted to the Realview(R)
-	  Emulation Baseboard platform.
-
-config MACH_REALVIEW_PB11MP
-	bool "Support RealView(R) Platform Baseboard for ARM11MPCore"
-	depends on ARCH_MULTI_V6
-	select HAVE_SMP
-	help
-	  Include support for the ARM(R) RealView(R) Platform Baseboard for
-	  the ARM11MPCore.  This platform has an on-board ARM11MPCore and has
-	  support for PCI-E and Compact Flash.
-
-# ARMv6 CPU without K extensions, but does have the new exclusive ops
-config MACH_REALVIEW_PB1176
-	bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S"
-	depends on ARCH_MULTI_V6
-	select CPU_V6
-	select HAVE_TCM
-	help
-	  Include support for the ARM(R) RealView(R) Platform Baseboard for
-	  ARM1176JZF-S.
-
-config MACH_REALVIEW_PBA8
-	bool "Support RealView(R) Platform Baseboard for Cortex(tm)-A8 platform"
-	depends on ARCH_MULTI_V7
-	help
-	  Include support for the ARM(R) RealView Platform Baseboard for
-	  Cortex(tm)-A8.  This platform has an on-board Cortex-A8 and has
-	  support for PCI-E and Compact Flash.
-
-config MACH_REALVIEW_PBX
-	bool "Support RealView(R) Platform Baseboard Explore for Cortex-A9"
-	depends on ARCH_MULTI_V7
-	select ZONE_DMA
-	help
-	  Include support for the ARM(R) RealView(R) Platform Baseboard
-	  Explore.
-
-endif
diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile
deleted file mode 100644
index e259091591b8..000000000000
--- a/arch/arm/mach-realview/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for the linux kernel.
-#
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-versatile/include
-
-obj-y					+= realview-dt.o
-obj-$(CONFIG_SMP)			+= platsmp-dt.o
diff --git a/arch/arm/mach-rockchip/platsmp.c b/arch/arm/mach-rockchip/platsmp.c
index 5ec58d004b7d..36915a073c23 100644
--- a/arch/arm/mach-rockchip/platsmp.c
+++ b/arch/arm/mach-rockchip/platsmp.c
@@ -137,7 +137,7 @@ static int rockchip_boot_secondary(unsigned int cpu, struct task_struct *idle)
 		/*
 		 * We communicate with the bootrom to active the cpus other
 		 * than cpu0, after a blob of initialize code, they will
-		 * stay at wfe state, once they are actived, they will check
+		 * stay at wfe state, once they are activated, they will check
 		 * the mailbox:
 		 * sram_base_addr + 4: 0xdeadbeaf
 		 * sram_base_addr + 8: start address for pc
diff --git a/arch/arm/mach-rockchip/pm.c b/arch/arm/mach-rockchip/pm.c
index 87389d9456b9..30d781d80fe0 100644
--- a/arch/arm/mach-rockchip/pm.c
+++ b/arch/arm/mach-rockchip/pm.c
@@ -311,7 +311,7 @@ void __init rockchip_suspend_init(void)
 					     &match);
 	if (!match) {
 		pr_err("Failed to find PMU node\n");
-		return;
+		goto out_put;
 	}
 	pm_data = (struct rockchip_pm_data *) match->data;
 
@@ -320,9 +320,12 @@ void __init rockchip_suspend_init(void)
 
 		if (ret) {
 			pr_err("%s: matches init error %d\n", __func__, ret);
-			return;
+			goto out_put;
 		}
 	}
 
 	suspend_set_ops(pm_data->ops);
+
+out_put:
+	of_node_put(np);
 }
diff --git a/arch/arm/mach-rpc/Kconfig b/arch/arm/mach-rpc/Kconfig
new file mode 100644
index 000000000000..55f6d829b677
--- /dev/null
+++ b/arch/arm/mach-rpc/Kconfig
@@ -0,0 +1,21 @@
+config ARCH_RPC
+	bool "RiscPC"
+	depends on ARCH_MULTI_V4 && !(ARCH_MULTI_V4T || ARCH_MULTI_V5)
+	depends on !(ARCH_FOOTBRIDGE || ARCH_SA1100 || ARCH_MOXART || ARCH_GEMINI)
+	depends on !CC_IS_CLANG && GCC_VERSION < 90100 && GCC_VERSION >= 60000
+	depends on CPU_LITTLE_ENDIAN
+	depends on ATAGS
+	depends on MMU
+	select ARCH_ACORN
+	select ARCH_MAY_HAVE_PC_FDC
+	select CPU_SA110
+	select FIQ
+	select HAVE_PATA_PLATFORM
+	select ISA_DMA_API
+	select LEGACY_TIMER_TICK
+	select NEED_MACH_IO_H
+	select NEED_MACH_MEMORY_H
+	select NO_IOPORT_MAP
+	help
+	  On the Acorn Risc-PC, Linux can support the internal IDE disk and
+	  CD-ROM interface, serial and parallel port, and the floppy drive.
diff --git a/arch/arm/mach-rpc/Makefile.boot b/arch/arm/mach-rpc/Makefile.boot
deleted file mode 100644
index 0ed8e8fbde99..000000000000
--- a/arch/arm/mach-rpc/Makefile.boot
+++ /dev/null
@@ -1,5 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-   zreladdr-y	+= 0x10008000
-params_phys-y	:= 0x10000100
-initrd_phys-y	:= 0x18000000
-
diff --git a/arch/arm/mach-rpc/fiq.S b/arch/arm/mach-rpc/fiq.S
index 0de83e9b0b39..087bdf4bc093 100644
--- a/arch/arm/mach-rpc/fiq.S
+++ b/arch/arm/mach-rpc/fiq.S
@@ -2,10 +2,11 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <mach/hardware.h>
-#include <mach/entry-macro.S>
 
-	.text
+	.equ	ioc_base_high, IOC_BASE & 0xff000000
+	.equ	ioc_base_low, IOC_BASE & 0x00ff0000
 
+	.text
 	.global	rpc_default_fiq_end
 ENTRY(rpc_default_fiq_start)
 	mov	r12, #ioc_base_high
diff --git a/arch/arm/mach-rpc/include/mach/entry-macro.S b/arch/arm/mach-rpc/include/mach/entry-macro.S
deleted file mode 100644
index a6d1a9f4bb79..000000000000
--- a/arch/arm/mach-rpc/include/mach/entry-macro.S
+++ /dev/null
@@ -1,13 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <mach/hardware.h>
-#include <asm/hardware/entry-macro-iomd.S>
-
-	.equ	ioc_base_high, IOC_BASE & 0xff000000
-	.equ	ioc_base_low, IOC_BASE & 0x00ff0000
-
-	.macro  get_irqnr_preamble, base, tmp
-	mov	\base, #ioc_base_high		@ point at IOC
-	.if	ioc_base_low
-	orr	\base, \base, #ioc_base_low
-	.endif
-	.endm
diff --git a/arch/arm/mach-rpc/irq.c b/arch/arm/mach-rpc/irq.c
index 803aeb126f0e..dc29384b6ef8 100644
--- a/arch/arm/mach-rpc/irq.c
+++ b/arch/arm/mach-rpc/irq.c
@@ -14,6 +14,99 @@
 #define CLR	0x04
 #define MASK	0x08
 
+static const u8 irq_prio_h[256] = {
+	 0, 8, 9, 8,10,10,10,10,11,11,11,11,10,10,10,10,
+	12, 8, 9, 8,10,10,10,10,11,11,11,11,10,10,10,10,
+	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10,
+	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10,
+	14,14,14,14,10,10,10,10,11,11,11,11,10,10,10,10,
+	14,14,14,14,10,10,10,10,11,11,11,11,10,10,10,10,
+	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10,
+	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10,
+	15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10,
+	15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10,
+	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10,
+	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10,
+	15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10,
+	15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10,
+	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10,
+	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10,
+};
+
+static const u8 irq_prio_d[256] = {
+	 0,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
+	20,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
+	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
+	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
+	22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
+	22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
+	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
+	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
+	23,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
+	23,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
+	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
+	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
+	22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
+	22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
+	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
+	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
+};
+
+static const u8 irq_prio_l[256] = {
+	 0, 0, 1, 0, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3,
+	 4, 0, 1, 0, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3,
+	 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5,
+	 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5,
+	 6, 6, 6, 6, 6, 6, 6, 6, 3, 3, 3, 3, 3, 3, 3, 3,
+	 6, 6, 6, 6, 6, 6, 6, 6, 3, 3, 3, 3, 3, 3, 3, 3,
+	 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5,
+	 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5,
+	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
+	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
+	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
+	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
+	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
+	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
+	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
+	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
+};
+
+static int iomd_get_irq_nr(void)
+{
+	int irq;
+	u8 reg;
+
+	/* get highest priority first */
+	reg = readb(IOC_BASE + IOMD_IRQREQB);
+	irq = irq_prio_h[reg];
+	if (irq)
+		return irq;
+
+	/* get DMA  */
+	reg = readb(IOC_BASE + IOMD_DMAREQ);
+	irq = irq_prio_d[reg];
+	if (irq)
+		return irq;
+
+	/* get low priority */
+	reg = readb(IOC_BASE + IOMD_IRQREQA);
+	irq = irq_prio_l[reg];
+	if (irq)
+		return irq;
+	return 0;
+}
+
+static void iomd_handle_irq(struct pt_regs *regs)
+{
+	int irq;
+
+	do {
+		irq = iomd_get_irq_nr();
+		if (irq)
+			generic_handle_irq(irq);
+	} while (irq);
+}
+
 static void __iomem *iomd_get_base(struct irq_data *d)
 {
 	void *cd = irq_data_get_irq_chip_data(d);
@@ -82,6 +175,8 @@ void __init rpc_init_irq(void)
 	set_fiq_handler(&rpc_default_fiq_start,
 		&rpc_default_fiq_end - &rpc_default_fiq_start);
 
+	set_handle_irq(iomd_handle_irq);
+
 	for (irq = 0; irq < NR_IRQS; irq++) {
 		clr = IRQ_NOREQUEST;
 		set = 0;
diff --git a/arch/arm/mach-s3c/Kconfig b/arch/arm/mach-s3c/Kconfig
index 25606e668cf9..a64143574546 100644
--- a/arch/arm/mach-s3c/Kconfig
+++ b/arch/arm/mach-s3c/Kconfig
@@ -43,12 +43,12 @@ config SAMSUNG_ATAGS
 	def_bool n
 	depends on ATAGS
 	help
-	   This option enables ATAGS based boot support code for
-	   Samsung platforms, including static platform devices, legacy
-	   clock, timer and interrupt initialization, etc.
+	  This option enables ATAGS based boot support code for
+	  Samsung platforms, including static platform devices, legacy
+	  clock, timer and interrupt initialization, etc.
 
-	   Platforms that support only DT based boot need not to select
-	   this option.
+	  Platforms that support only DT based boot need not to select
+	  this option.
 
 if SAMSUNG_ATAGS
 
@@ -102,7 +102,7 @@ config S3C_DEV_HSMMC3
 config S3C_DEV_HWMON
 	bool
 	help
-	    Compile in platform device definitions for HWMON
+	  Compile in platform device definitions for HWMON
 
 config S3C_DEV_I2C1
 	bool
@@ -191,22 +191,10 @@ config S3C64XX_DEV_SPI0
 	  Compile in platform device definitions for S3C64XX's type
 	  SPI controller 0
 
-config S3C64XX_DEV_SPI1
-	bool
-	help
-	  Compile in platform device definitions for S3C64XX's type
-	  SPI controller 1
-
-config S3C64XX_DEV_SPI2
-	bool
-	help
-	  Compile in platform device definitions for S3C64XX's type
-	  SPI controller 2
-
 config SAMSUNG_DEV_TS
 	bool
 	help
-	    Common in platform device definitions for touchscreen device
+	  Common in platform device definitions for touchscreen device
 
 config SAMSUNG_DEV_KEYPAD
 	bool
@@ -219,14 +207,6 @@ config SAMSUNG_DEV_PWM
 	help
 	  Compile in platform device definition for PWM Timer
 
-config S3C24XX_PWM
-	bool "PWM device support"
-	select PWM
-	select PWM_SAMSUNG
-	help
-	  Support for exporting the PWM timer blocks via the pwm device
-	  system
-
 config GPIO_SAMSUNG
 	def_bool y
 
diff --git a/arch/arm/mach-s3c/Kconfig.s3c24xx b/arch/arm/mach-s3c/Kconfig.s3c24xx
index 000e3e234f71..7287e173f30e 100644
--- a/arch/arm/mach-s3c/Kconfig.s3c24xx
+++ b/arch/arm/mach-s3c/Kconfig.s3c24xx
@@ -4,6 +4,27 @@
 #		http://www.samsung.com/
 #
 # Copyright 2007 Simtec Electronics
+menuconfig ARCH_S3C24XX
+	bool "Samsung S3C24XX SoCs (deprecated, see help)"
+	depends on ARCH_MULTI_V4T || ARCH_MULTI_V5
+	depends on CPU_LITTLE_ENDIAN
+	depends on ATAGS && UNUSED_BOARD_FILES
+	select CLKSRC_SAMSUNG_PWM
+	select GPIO_SAMSUNG
+	select GPIOLIB
+	select S3C2410_WATCHDOG
+	select SAMSUNG_ATAGS
+	select WATCHDOG
+	help
+	  Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
+	  and S3C2450 SoCs based systems, such as the Simtec Electronics BAST
+	  (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the
+	  Samsung SMDK2410 development board (and derivatives).
+
+	  The platform is deprecated and scheduled for removal. Please reach to
+	  the maintainers of the platform and linux-samsung-soc@vger.kernel.org if
+	  you still use it.
+	  Without such feedback, the platform will be removed after 2022.
 
 if ARCH_S3C24XX
 
@@ -12,19 +33,17 @@ config PLAT_S3C24XX
 	select GPIOLIB
 	select NO_IOPORT_MAP
 	select S3C_DEV_NAND
-	select IRQ_DOMAIN
 	select COMMON_CLK
 	help
 	  Base platform code for any Samsung S3C24XX device
 
-
-
 menu "Samsung S3C24XX SoCs Support"
 
 comment "S3C24XX SoCs"
 
 config CPU_S3C2410
 	bool "Samsung S3C2410"
+	depends on ARCH_MULTI_V4T
 	default y
 	select CPU_ARM920T
 	select S3C2410_COMMON_CLK
@@ -36,6 +55,7 @@ config CPU_S3C2410
 
 config CPU_S3C2412
 	bool "Samsung S3C2412"
+	depends on ARCH_MULTI_V5
 	select CPU_ARM926T
 	select S3C2412_COMMON_CLK
 	select S3C2412_PM if PM_SLEEP
@@ -44,6 +64,7 @@ config CPU_S3C2412
 
 config CPU_S3C2416
 	bool "Samsung S3C2416/S3C2450"
+	depends on ARCH_MULTI_V5
 	select CPU_ARM926T
 	select S3C2416_PM if PM_SLEEP
 	select S3C2443_COMMON_CLK
@@ -52,6 +73,7 @@ config CPU_S3C2416
 
 config CPU_S3C2440
 	bool "Samsung S3C2440"
+	depends on ARCH_MULTI_V4T
 	select CPU_ARM920T
 	select S3C2410_COMMON_CLK
 	select S3C2410_PM if PM_SLEEP
@@ -60,6 +82,7 @@ config CPU_S3C2440
 
 config CPU_S3C2442
 	bool "Samsung S3C2442"
+	depends on ARCH_MULTI_V4T
 	select CPU_ARM920T
 	select S3C2410_COMMON_CLK
 	select S3C2410_PM if PM_SLEEP
@@ -72,6 +95,7 @@ config CPU_S3C244X
 
 config CPU_S3C2443
 	bool "Samsung S3C2443"
+	depends on ARCH_MULTI_V4T
 	select CPU_ARM920T
 	select S3C2443_COMMON_CLK
 	help
@@ -181,7 +205,6 @@ config MACH_AML_M5900
 
 config ARCH_BAST
 	bool "Simtec Electronics BAST (EB2410ITX)"
-	select ISA
 	select MACH_BAST_IDE
 	select S3C2410_COMMON_DCLK
 	select S3C2410_IOTIMING if ARM_S3C2410_CPUFREQ
@@ -268,7 +291,7 @@ config MACH_VR1000
 	help
 	  Say Y here if you are using the Thorcom VR1000 board.
 
-endif	# CPU_S3C2410
+endif # CPU_S3C2410
 
 config S3C2412_PM_SLEEP
 	bool
@@ -342,7 +365,7 @@ config MACH_VSTMS
 	help
 	  Say Y here if you are using an VSTMS board
 
-endif	# CPU_S3C2412
+endif # CPU_S3C2412
 
 if CPU_S3C2416
 
@@ -390,7 +413,7 @@ config MACH_S3C2416_DT
 	  Note: This is under development and not all peripherals can be supported
 	  with this machine file.
 
-endif	# CPU_S3C2416
+endif # CPU_S3C2416
 
 if CPU_S3C2440 || CPU_S3C2442
 
@@ -419,7 +442,7 @@ config S3C2440_PLL_16934400
 	default y if S3C24XX_PLL
 	help
 	  PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
-endif
+endif # CPU_S3C2440 || CPU_S3C2442
 
 if CPU_S3C2440
 
@@ -515,7 +538,7 @@ config SMDK2440_CPU2440
 	default y if ARCH_S3C2440
 	select S3C2440_XTAL_16934400
 
-endif	# CPU_S3C2440
+endif # CPU_S3C2440
 
 if CPU_S3C2442
 
@@ -532,10 +555,9 @@ config MACH_NEO1973_GTA02
 	select MFD_PCF50633
 	select PCF50633_GPIO
 	select POWER_SUPPLY
-	select S3C24XX_PWM
 	select S3C_DEV_USB_HOST
 	help
-	   Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
+	  Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
 
 config MACH_RX1950
 	bool "HP iPAQ rx1950"
@@ -544,12 +566,11 @@ config MACH_RX1950
 	select S3C2410_COMMON_DCLK
 	select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
 	select S3C2440_XTAL_16934400
-	select S3C24XX_PWM
 	select S3C_DEV_NAND
 	help
-	   Say Y here if you're using HP iPAQ rx1950
+	  Say Y here if you're using HP iPAQ rx1950
 
-endif	# CPU_S3C2442
+endif # CPU_S3C2442
 
 if CPU_S3C2443 || CPU_S3C2416
 
@@ -558,7 +579,7 @@ config S3C2443_SETUP_SPI
 	help
 	  Common setup code for SPI GPIO configurations
 
-endif	# CPU_S3C2443 || CPU_S3C2416
+endif # CPU_S3C2443 || CPU_S3C2416
 
 if CPU_S3C2443
 
@@ -571,13 +592,13 @@ config MACH_SMDK2443
 	help
 	  Say Y here if you are using an SMDK2443
 
-endif	# CPU_S3C2443
+endif # CPU_S3C2443
 
 config PM_H1940
 	bool
 	help
 	  Internal node for H1940 and related PM
 
-endmenu	# Samsung S3C24XX SoCs Support
+endmenu # "Samsung S3C24XX SoCs Support"
 
-endif	# ARCH_S3C24XX
+endif # ARCH_S3C24XX
diff --git a/arch/arm/mach-s3c/Kconfig.s3c64xx b/arch/arm/mach-s3c/Kconfig.s3c64xx
index af01675d8769..0c1b91c3ac5f 100644
--- a/arch/arm/mach-s3c/Kconfig.s3c64xx
+++ b/arch/arm/mach-s3c/Kconfig.s3c64xx
@@ -4,7 +4,7 @@
 #	Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
 
 menuconfig ARCH_S3C64XX
-	bool "Samsung S3C64XX"
+	bool "Samsung S3C64XX (deprecated, see help)"
 	depends on ARCH_MULTI_V6
 	select ARM_AMBA
 	select ARM_VIC
@@ -24,6 +24,11 @@ menuconfig ARCH_S3C64XX
 	help
 	  Samsung S3C64XX series based systems
 
+	  The platform is deprecated and scheduled for removal. Please reach to
+	  the maintainers of the platform and linux-samsung-soc@vger.kernel.org if
+	  you still use it.
+	  Without such feedback, the platform will be removed after 2024.
+
 if ARCH_S3C64XX
 
 # Configuration options for the S3C6410 CPU
@@ -99,7 +104,7 @@ config S3C64XX_SETUP_SDHCI_GPIO
 config S3C64XX_SETUP_SPI
 	bool
 	help
-	 Common setup code for SPI GPIO configurations
+	  Common setup code for SPI GPIO configurations
 
 config S3C64XX_SETUP_USB_PHY
 	bool
@@ -109,8 +114,8 @@ config S3C64XX_SETUP_USB_PHY
 # S36400 Macchine support
 
 config MACH_SMDK6400
-       bool "SMDK6400"
-	depends on ATAGS
+	bool "SMDK6400"
+	depends on ATAGS && UNUSED_BOARD_FILES
 	select CPU_S3C6400
 	select S3C64XX_SETUP_SDHCI
 	select S3C_DEV_HSMMC1
@@ -121,7 +126,7 @@ config MACH_SMDK6400
 
 config MACH_ANW6410
 	bool "A&W6410"
-	depends on ATAGS
+	depends on ATAGS && UNUSED_BOARD_FILES
 	select CPU_S3C6410
 	select S3C64XX_SETUP_FB_24BPP
 	select S3C_DEV_FB
@@ -130,7 +135,7 @@ config MACH_ANW6410
 
 config MACH_MINI6410
 	bool "MINI6410"
-	depends on ATAGS
+	depends on ATAGS && UNUSED_BOARD_FILES
 	select CPU_S3C6410
 	select S3C64XX_SETUP_FB_24BPP
 	select S3C64XX_SETUP_SDHCI
@@ -146,7 +151,7 @@ config MACH_MINI6410
 
 config MACH_REAL6410
 	bool "REAL6410"
-	depends on ATAGS
+	depends on ATAGS && UNUSED_BOARD_FILES
 	select CPU_S3C6410
 	select S3C64XX_SETUP_FB_24BPP
 	select S3C64XX_SETUP_SDHCI
@@ -162,7 +167,7 @@ config MACH_REAL6410
 
 config MACH_SMDK6410
 	bool "SMDK6410"
-	depends on ATAGS
+	depends on ATAGS && UNUSED_BOARD_FILES
 	select CPU_S3C6410
 	select S3C64XX_SETUP_FB_24BPP
 	select S3C64XX_SETUP_I2C1
@@ -200,7 +205,7 @@ config SMDK6410_SD_CH0
 	bool "Use channel 0 only"
 	depends on MACH_SMDK6410
 	help
-          Select CON7 (channel 0) as the MMC/SD slot, as
+	  Select CON7 (channel 0) as the MMC/SD slot, as
 	  at least some SMDK6410 boards come with the
 	  resistors fitted so that the card detects for
 	  channels 0 and 1 are the same.
@@ -209,7 +214,7 @@ config SMDK6410_SD_CH1
 	bool "Use channel 1 only"
 	depends on MACH_SMDK6410
 	help
-          Select CON6 (channel 1) as the MMC/SD slot, as
+	  Select CON6 (channel 1) as the MMC/SD slot, as
 	  at least some SMDK6410 boards come with the
 	  resistors fitted so that the card detects for
 	  channels 0 and 1 are the same.
@@ -249,17 +254,17 @@ config SMDK6410_WM1192_EV1
 
 config MACH_NCP
 	bool "NCP"
-	depends on ATAGS
+	depends on ATAGS && UNUSED_BOARD_FILES
 	select CPU_S3C6410
 	select S3C64XX_SETUP_I2C1
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_I2C1
 	help
-          Machine support for the Samsung NCP
+	  Machine support for the Samsung NCP
 
 config MACH_HMT
 	bool "Airgoo HMT"
-	depends on ATAGS
+	depends on ATAGS && UNUSED_BOARD_FILES
 	select CPU_S3C6410
 	select S3C64XX_SETUP_FB_24BPP
 	select S3C_DEV_FB
@@ -287,21 +292,21 @@ config MACH_SMARTQ
 	select SAMSUNG_DEV_PWM
 	select SAMSUNG_DEV_TS
 	help
-	    Shared machine support for SmartQ 5/7
+	  Shared machine support for SmartQ 5/7
 
 config MACH_SMARTQ5
 	bool "SmartQ 5"
-	depends on ATAGS
+	depends on ATAGS && UNUSED_BOARD_FILES
 	select MACH_SMARTQ
 	help
-	    Machine support for the SmartQ 5
+	  Machine support for the SmartQ 5
 
 config MACH_SMARTQ7
 	bool "SmartQ 7"
-	depends on ATAGS
+	depends on ATAGS && UNUSED_BOARD_FILES
 	select MACH_SMARTQ
 	help
-	    Machine support for the SmartQ 7
+	  Machine support for the SmartQ 7
 
 config MACH_WLF_CRAGG_6410
 	bool "Wolfson Cragganmore 6410"
diff --git a/arch/arm/mach-s3c/Makefile b/arch/arm/mach-s3c/Makefile
index 54188d10ab2e..7c7d3318fd61 100644
--- a/arch/arm/mach-s3c/Makefile
+++ b/arch/arm/mach-s3c/Makefile
@@ -2,8 +2,6 @@
 #
 # Copyright 2009 Simtec Electronics
 
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include
-
 ifdef CONFIG_ARCH_S3C24XX
 include $(src)/Makefile.s3c24xx
 endif
diff --git a/arch/arm/mach-s3c/Makefile.boot b/arch/arm/mach-s3c/Makefile.boot
deleted file mode 100644
index 7f19e226035e..000000000000
--- a/arch/arm/mach-s3c/Makefile.boot
+++ /dev/null
@@ -1,9 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-ifeq ($(CONFIG_PM_H1940),y)
-	zreladdr-y	+= 0x30108000
-	params_phys-y	:= 0x30100100
-else
-	zreladdr-y	+= 0x30008000
-	params_phys-y	:= 0x30000100
-endif
diff --git a/arch/arm/mach-s3c/Makefile.s3c64xx b/arch/arm/mach-s3c/Makefile.s3c64xx
index 0c18e31936df..21e919bf2cd1 100644
--- a/arch/arm/mach-s3c/Makefile.s3c64xx
+++ b/arch/arm/mach-s3c/Makefile.s3c64xx
@@ -3,9 +3,6 @@
 # Copyright 2008 Openmoko, Inc.
 # Copyright 2008 Simtec Electronics
 
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
-asflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
-
 # PM
 
 obj-$(CONFIG_PM)		+= pm-s3c64xx.o
diff --git a/arch/arm/mach-s3c/bast-ide.c b/arch/arm/mach-s3c/bast-ide.c
index da64db1811d8..67f0adc1fec0 100644
--- a/arch/arm/mach-s3c/bast-ide.c
+++ b/arch/arm/mach-s3c/bast-ide.c
@@ -20,7 +20,7 @@
 #include <asm/mach/irq.h>
 
 #include "map.h"
-#include <mach/irqs.h>
+#include "irqs.h"
 
 #include "bast.h"
 
diff --git a/arch/arm/mach-s3c/bast-irq.c b/arch/arm/mach-s3c/bast-irq.c
index d299f124e6dc..cfc2ddc65513 100644
--- a/arch/arm/mach-s3c/bast-irq.c
+++ b/arch/arm/mach-s3c/bast-irq.c
@@ -16,7 +16,7 @@
 #include <asm/mach/irq.h>
 
 #include "regs-irq.h"
-#include <mach/irqs.h>
+#include "irqs.h"
 
 #include "bast.h"
 
diff --git a/arch/arm/mach-s3c/cpu.c b/arch/arm/mach-s3c/cpu.c
index 6e9772555f0d..3491f790d575 100644
--- a/arch/arm/mach-s3c/cpu.c
+++ b/arch/arm/mach-s3c/cpu.c
@@ -10,7 +10,7 @@
 #include <linux/init.h>
 #include <linux/io.h>
 
-#include <mach/map-base.h>
+#include "map-base.h"
 #include "cpu.h"
 
 unsigned long samsung_cpu_id;
@@ -28,4 +28,5 @@ void __init s3c64xx_init_cpu(void)
 	}
 
 	pr_info("Samsung CPU ID: 0x%08lx\n", samsung_cpu_id);
+	pr_err("The platform is deprecated and scheduled for removal. Please reach to the maintainers of the platform and linux-samsung-soc@vger.kernel.org if you still use it.  Without such feedback, the platform will be removed after 2022.\n");
 }
diff --git a/arch/arm/mach-s3c/dev-audio-s3c64xx.c b/arch/arm/mach-s3c/dev-audio-s3c64xx.c
index fc2f077afd24..909e82c148ba 100644
--- a/arch/arm/mach-s3c/dev-audio-s3c64xx.c
+++ b/arch/arm/mach-s3c/dev-audio-s3c64xx.c
@@ -10,7 +10,7 @@
 #include <linux/gpio.h>
 #include <linux/export.h>
 
-#include <mach/irqs.h>
+#include "irqs.h"
 #include "map.h"
 
 #include "devs.h"
diff --git a/arch/arm/mach-s3c/dev-uart-s3c64xx.c b/arch/arm/mach-s3c/dev-uart-s3c64xx.c
index 8288e8d6c092..f9c947b8971b 100644
--- a/arch/arm/mach-s3c/dev-uart-s3c64xx.c
+++ b/arch/arm/mach-s3c/dev-uart-s3c64xx.c
@@ -16,7 +16,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 #include "map.h"
-#include <mach/irqs.h>
+#include "irqs.h"
 
 #include "devs.h"
 
diff --git a/arch/arm/mach-s3c/devs.c b/arch/arm/mach-s3c/devs.c
index 06dec64848f9..9ac07c023adf 100644
--- a/arch/arm/mach-s3c/devs.c
+++ b/arch/arm/mach-s3c/devs.c
@@ -38,7 +38,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/irqs.h>
+#include "irqs.h"
 #include "map.h"
 #include "gpio-samsung.h"
 #include "gpio-cfg.h"
@@ -1107,8 +1107,7 @@ struct platform_device s3c64xx_device_spi0 = {
 	},
 };
 
-void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
-						int num_cs)
+void __init s3c64xx_spi0_set_platdata(int src_clk_nr, int num_cs)
 {
 	struct s3c64xx_spi_info pd;
 
@@ -1120,80 +1119,8 @@ void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
 
 	pd.num_cs = num_cs;
 	pd.src_clk_nr = src_clk_nr;
-	pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi0_cfg_gpio;
+	pd.cfg_gpio = s3c64xx_spi0_cfg_gpio;
 
 	s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi0);
 }
 #endif /* CONFIG_S3C64XX_DEV_SPI0 */
-
-#ifdef CONFIG_S3C64XX_DEV_SPI1
-static struct resource s3c64xx_spi1_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_SPI1, SZ_256),
-	[1] = DEFINE_RES_IRQ(IRQ_SPI1),
-};
-
-struct platform_device s3c64xx_device_spi1 = {
-	.name		= "s3c6410-spi",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(s3c64xx_spi1_resource),
-	.resource	= s3c64xx_spi1_resource,
-	.dev = {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-void __init s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
-						int num_cs)
-{
-	struct s3c64xx_spi_info pd;
-
-	/* Reject invalid configuration */
-	if (!num_cs || src_clk_nr < 0) {
-		pr_err("%s: Invalid SPI configuration\n", __func__);
-		return;
-	}
-
-	pd.num_cs = num_cs;
-	pd.src_clk_nr = src_clk_nr;
-	pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi1_cfg_gpio;
-
-	s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi1);
-}
-#endif /* CONFIG_S3C64XX_DEV_SPI1 */
-
-#ifdef CONFIG_S3C64XX_DEV_SPI2
-static struct resource s3c64xx_spi2_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_SPI2, SZ_256),
-	[1] = DEFINE_RES_IRQ(IRQ_SPI2),
-};
-
-struct platform_device s3c64xx_device_spi2 = {
-	.name		= "s3c6410-spi",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(s3c64xx_spi2_resource),
-	.resource	= s3c64xx_spi2_resource,
-	.dev = {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-void __init s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
-						int num_cs)
-{
-	struct s3c64xx_spi_info pd;
-
-	/* Reject invalid configuration */
-	if (!num_cs || src_clk_nr < 0) {
-		pr_err("%s: Invalid SPI configuration\n", __func__);
-		return;
-	}
-
-	pd.num_cs = num_cs;
-	pd.src_clk_nr = src_clk_nr;
-	pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi2_cfg_gpio;
-
-	s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi2);
-}
-#endif /* CONFIG_S3C64XX_DEV_SPI2 */
diff --git a/arch/arm/mach-s3c/devs.h b/arch/arm/mach-s3c/devs.h
index 02b0c5750572..991b9b2006a1 100644
--- a/arch/arm/mach-s3c/devs.h
+++ b/arch/arm/mach-s3c/devs.h
@@ -33,8 +33,6 @@ extern struct platform_device s3c64xx_device_onenand1;
 extern struct platform_device s3c64xx_device_pcm0;
 extern struct platform_device s3c64xx_device_pcm1;
 extern struct platform_device s3c64xx_device_spi0;
-extern struct platform_device s3c64xx_device_spi1;
-extern struct platform_device s3c64xx_device_spi2;
 
 extern struct platform_device s3c_device_adc;
 extern struct platform_device s3c_device_cfcon;
diff --git a/arch/arm/mach-s3c/gpio-samsung.c b/arch/arm/mach-s3c/gpio-samsung.c
index fda2c01f5a08..b7fc7c41309c 100644
--- a/arch/arm/mach-s3c/gpio-samsung.c
+++ b/arch/arm/mach-s3c/gpio-samsung.c
@@ -26,7 +26,7 @@
 
 #include <asm/irq.h>
 
-#include <mach/irqs.h>
+#include "irqs.h"
 #include "map.h"
 #include "regs-gpio.h"
 #include "gpio-samsung.h"
diff --git a/arch/arm/mach-s3c/include/mach/io-s3c24xx.h b/arch/arm/mach-s3c/include/mach/io-s3c24xx.h
deleted file mode 100644
index 738b775d3336..000000000000
--- a/arch/arm/mach-s3c/include/mach/io-s3c24xx.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-s3c2410/include/mach/io.h
- *  from arch/arm/mach-rpc/include/mach/io.h
- *
- * Copyright (C) 1997 Russell King
- *	     (C) 2003 Simtec Electronics
-*/
-
-#ifndef __ASM_ARM_ARCH_IO_S3C24XX_H
-#define __ASM_ARM_ARCH_IO_S3C24XX_H
-
-#include <mach/map-base.h>
-
-/*
- * ISA style IO, for each machine to sort out mappings for,
- * if it implements it. We reserve two 16M regions for ISA,
- * so the PC/104 can use separate addresses for 8-bit and
- * 16-bit port I/O.
- */
-#define PCIO_BASE		S3C_ADDR(0x02000000)
-#define IO_SPACE_LIMIT		0x00ffffff
-#define S3C24XX_VA_ISA_WORD	(PCIO_BASE)
-#define S3C24XX_VA_ISA_BYTE	(PCIO_BASE + 0x01000000)
-
-#ifdef CONFIG_ISA
-
-#define inb(p)		readb(S3C24XX_VA_ISA_BYTE + (p))
-#define inw(p)		readw(S3C24XX_VA_ISA_WORD + (p))
-#define inl(p)		readl(S3C24XX_VA_ISA_WORD + (p))
-
-#define outb(v,p)	writeb((v), S3C24XX_VA_ISA_BYTE + (p))
-#define outw(v,p)	writew((v), S3C24XX_VA_ISA_WORD + (p))
-#define outl(v,p)	writel((v), S3C24XX_VA_ISA_WORD + (p))
-
-#define insb(p,d,l)	readsb(S3C24XX_VA_ISA_BYTE + (p),d,l)
-#define insw(p,d,l)	readsw(S3C24XX_VA_ISA_WORD + (p),d,l)
-#define insl(p,d,l)	readsl(S3C24XX_VA_ISA_WORD + (p),d,l)
-
-#define outsb(p,d,l)	writesb(S3C24XX_VA_ISA_BYTE + (p),d,l)
-#define outsw(p,d,l)	writesw(S3C24XX_VA_ISA_WORD + (p),d,l)
-#define outsl(p,d,l)	writesl(S3C24XX_VA_ISA_WORD + (p),d,l)
-
-#else
-
-#define __io(x) (PCIO_BASE + (x))
-
-#endif
-
-#endif
diff --git a/arch/arm/mach-s3c/include/mach/io.h b/arch/arm/mach-s3c/include/mach/io.h
deleted file mode 100644
index 30a0135708dc..000000000000
--- a/arch/arm/mach-s3c/include/mach/io.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2020 Krzysztof Kozlowski <krzk@kernel.org>
- */
-
-#ifdef CONFIG_ARCH_S3C24XX
-#include "io-s3c24xx.h"
-#endif
diff --git a/arch/arm/mach-s3c/init.c b/arch/arm/mach-s3c/init.c
index 9d92f03e9bc1..bf513616f55d 100644
--- a/arch/arm/mach-s3c/init.c
+++ b/arch/arm/mach-s3c/init.c
@@ -59,6 +59,8 @@ void __init s3c_init_cpu(unsigned long idcode,
 
 	if (cpu->map_io)
 		cpu->map_io();
+
+	pr_err("The platform is deprecated and scheduled for removal. Please reach to the maintainers of the platform and linux-samsung-soc@vger.kernel.org if you still use it.  Without such feedback, the platform will be removed after 2022.\n");
 }
 
 /* s3c24xx_init_clocks
diff --git a/arch/arm/mach-s3c/iotiming-s3c2410.c b/arch/arm/mach-s3c/iotiming-s3c2410.c
index 28d9f473e24a..09f388d8f824 100644
--- a/arch/arm/mach-s3c/iotiming-s3c2410.c
+++ b/arch/arm/mach-s3c/iotiming-s3c2410.c
@@ -259,7 +259,7 @@ static const unsigned int tacc_tab[] = {
 /**
  * get_tacc - turn tACC value into cycle time
  * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
- * @val: The bank timing register value, shifed down.
+ * @val: The bank timing register value, shifted down.
  */
 static unsigned int get_tacc(unsigned long hclk_tns,
 			     unsigned long val)
diff --git a/arch/arm/mach-s3c/irq-pm-s3c24xx.c b/arch/arm/mach-s3c/irq-pm-s3c24xx.c
index 4d5e28312d91..55f41135ad70 100644
--- a/arch/arm/mach-s3c/irq-pm-s3c24xx.c
+++ b/arch/arm/mach-s3c/irq-pm-s3c24xx.c
@@ -15,7 +15,7 @@
 
 #include "cpu.h"
 #include "pm.h"
-#include <mach/map-base.h>
+#include "map-base.h"
 #include "map-s3c.h"
 
 #include "regs-irq.h"
diff --git a/arch/arm/mach-s3c/irq-s3c24xx.c b/arch/arm/mach-s3c/irq-s3c24xx.c
index 3776d5206f9b..088cc04b7431 100644
--- a/arch/arm/mach-s3c/irq-s3c24xx.c
+++ b/arch/arm/mach-s3c/irq-s3c24xx.c
@@ -26,7 +26,7 @@
 #include <asm/exception.h>
 #include <asm/mach/irq.h>
 
-#include <mach/irqs.h>
+#include "irqs.h"
 #include "regs-irq.h"
 #include "regs-gpio.h"
 
diff --git a/arch/arm/mach-s3c/include/mach/irqs-s3c24xx.h b/arch/arm/mach-s3c/irqs-s3c24xx.h
index aaf3bae08b52..fecbf7e440c6 100644
--- a/arch/arm/mach-s3c/include/mach/irqs-s3c24xx.h
+++ b/arch/arm/mach-s3c/irqs-s3c24xx.h
@@ -108,6 +108,8 @@
 #define IRQ_TC			S3C2410_IRQSUB(9)
 #define IRQ_ADC			S3C2410_IRQSUB(10)
 
+#define NR_IRQS_S3C2410		(S3C2410_IRQSUB(10) + 1)
+
 /* extra irqs for s3c2412 */
 
 #define IRQ_S3C2412_CFSDI	S3C2410_IRQ(21)
@@ -115,6 +117,7 @@
 #define IRQ_S3C2412_SDI		S3C2410_IRQSUB(13)
 #define IRQ_S3C2412_CF		S3C2410_IRQSUB(14)
 
+#define NR_IRQS_S3C2412		(S3C2410_IRQSUB(14) + 1)
 
 #define IRQ_S3C2416_EINT8t15	S3C2410_IRQ(5)
 #define IRQ_S3C2416_DMA		S3C2410_IRQ(17)
@@ -146,13 +149,20 @@
 #define IRQ_S3C2416_I2S0	S3C2416_IRQ(6)
 #define IRQ_S3C2416_I2S1	S3C2416_IRQ(7)
 
-/* extra irqs for s3c2440 */
+#define NR_IRQS_S3C2416		(S3C2416_IRQ(7) + 1)
+
+/* extra irqs for s3c2440/s3c2442 */
 
 #define IRQ_S3C2440_CAM_C	S3C2410_IRQSUB(11)	/* S3C2443 too */
 #define IRQ_S3C2440_CAM_P	S3C2410_IRQSUB(12)	/* S3C2443 too */
+
+#define NR_IRQS_S3C2442		(S3C2410_IRQSUB(12) + 1)
+
 #define IRQ_S3C2440_WDT		S3C2410_IRQSUB(13)
 #define IRQ_S3C2440_AC97	S3C2410_IRQSUB(14)
 
+#define NR_IRQS_S3C2440		(S3C2410_IRQSUB(14) + 1)
+
 /* irqs for s3c2443 */
 
 #define IRQ_S3C2443_DMA		S3C2410_IRQ(17)		/* IRQ_DMA1 */
@@ -186,11 +196,7 @@
 #define IRQ_S3C2443_WDT		S3C2410_IRQSUB(27)
 #define IRQ_S3C2443_AC97	S3C2410_IRQSUB(28)
 
-#if defined(CONFIG_CPU_S3C2416)
-#define NR_IRQS (IRQ_S3C2416_I2S1 + 1)
-#else
-#define NR_IRQS (IRQ_S3C2443_AC97 + 1)
-#endif
+#define NR_IRQS_S3C2443		(S3C2410_IRQSUB(28) + 1)
 
 /* compatibility define. */
 #define IRQ_UART3		IRQ_S3C2443_UART3
diff --git a/arch/arm/mach-s3c/include/mach/irqs-s3c64xx.h b/arch/arm/mach-s3c/irqs-s3c64xx.h
index c244e480e6b3..c244e480e6b3 100644
--- a/arch/arm/mach-s3c/include/mach/irqs-s3c64xx.h
+++ b/arch/arm/mach-s3c/irqs-s3c64xx.h
diff --git a/arch/arm/mach-s3c/include/mach/irqs.h b/arch/arm/mach-s3c/irqs.h
index 0bff1c1c8eb0..0bff1c1c8eb0 100644
--- a/arch/arm/mach-s3c/include/mach/irqs.h
+++ b/arch/arm/mach-s3c/irqs.h
diff --git a/arch/arm/mach-s3c/mach-amlm5900.c b/arch/arm/mach-s3c/mach-amlm5900.c
index 94c4512ace17..f85e5885e9b4 100644
--- a/arch/arm/mach-s3c/mach-amlm5900.c
+++ b/arch/arm/mach-s3c/mach-amlm5900.c
@@ -239,7 +239,9 @@ static void __init amlm5900_init(void)
 
 MACHINE_START(AML_M5900, "AML_M5900")
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2410,
 	.map_io		= amlm5900_map_io,
+	.nr_irqs	= NR_IRQS_S3C2410,
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= amlm5900_init,
 	.init_time	= amlm5900_init_time,
diff --git a/arch/arm/mach-s3c/mach-anubis.c b/arch/arm/mach-s3c/mach-anubis.c
index 04147cc0adcc..4536f3e66e27 100644
--- a/arch/arm/mach-s3c/mach-anubis.c
+++ b/arch/arm/mach-s3c/mach-anubis.c
@@ -57,11 +57,6 @@ static struct map_desc anubis_iodesc[] __initdata = {
 	.pfn		= __phys_to_pfn(0x0),
 	.length		= SZ_4M,
 	.type		= MT_DEVICE,
-  }, {
-	.virtual	= (u32)S3C24XX_VA_ISA_WORD,
-	.pfn		= __phys_to_pfn(0x0),
-	.length 	= SZ_4M,
-	.type		= MT_DEVICE,
   },
 
   /* we could possibly compress the next set down into a set of smaller tables
@@ -419,6 +414,7 @@ static void __init anubis_init(void)
 MACHINE_START(ANUBIS, "Simtec-Anubis")
 	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2440,
 	.map_io		= anubis_map_io,
 	.init_machine	= anubis_init,
 	.init_irq	= s3c2440_init_irq,
diff --git a/arch/arm/mach-s3c/mach-anw6410.c b/arch/arm/mach-s3c/mach-anw6410.c
index 825714e9ac66..b67eae43e04f 100644
--- a/arch/arm/mach-s3c/mach-anw6410.c
+++ b/arch/arm/mach-s3c/mach-anw6410.c
@@ -40,7 +40,7 @@
 
 #include "devs.h"
 #include "cpu.h"
-#include <mach/irqs.h>
+#include "irqs.h"
 #include "regs-gpio.h"
 #include "gpio-samsung.h"
 
diff --git a/arch/arm/mach-s3c/mach-at2440evb.c b/arch/arm/mach-s3c/mach-at2440evb.c
index c6a5a51d84aa..743403d873e0 100644
--- a/arch/arm/mach-s3c/mach-at2440evb.c
+++ b/arch/arm/mach-s3c/mach-at2440evb.c
@@ -225,6 +225,7 @@ static void __init at2440evb_init(void)
 
 MACHINE_START(AT2440EVB, "AT2440EVB")
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2440,
 	.map_io		= at2440evb_map_io,
 	.init_machine	= at2440evb_init,
 	.init_irq	= s3c2440_init_irq,
diff --git a/arch/arm/mach-s3c/mach-bast.c b/arch/arm/mach-s3c/mach-bast.c
index 27e8d5950228..a33ceab81e09 100644
--- a/arch/arm/mach-s3c/mach-bast.c
+++ b/arch/arm/mach-s3c/mach-bast.c
@@ -75,11 +75,6 @@ static struct map_desc bast_iodesc[] __initdata = {
 	  .pfn		= PA_CS2(BAST_PA_ISAIO),
 	  .length	= SZ_16M,
 	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)S3C24XX_VA_ISA_WORD,
-	  .pfn		= PA_CS3(BAST_PA_ISAIO),
-	  .length	= SZ_16M,
-	  .type		= MT_DEVICE,
   },
   /* bast CPLD control registers, and external interrupt controls */
   {
@@ -580,6 +575,7 @@ static void __init bast_init(void)
 MACHINE_START(BAST, "Simtec-BAST")
 	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2410,
 	.map_io		= bast_map_io,
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= bast_init,
diff --git a/arch/arm/mach-s3c/mach-crag6410-module.c b/arch/arm/mach-s3c/mach-crag6410-module.c
index 407ad493493e..4edde13b89b5 100644
--- a/arch/arm/mach-s3c/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c/mach-crag6410-module.c
@@ -28,14 +28,10 @@
 #include <linux/platform_data/spi-s3c64xx.h>
 
 #include "cpu.h"
-#include <mach/irqs.h>
+#include "irqs.h"
 
 #include "crag6410.h"
 
-static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = {
-	.line = S3C64XX_GPC(3),
-};
-
 static struct wm0010_pdata wm0010_pdata = {
 	.gpio_reset = S3C64XX_GPN(6),
 	.reset_active_high = 1, /* Active high for Glenfarclas Rev 2 */
@@ -49,7 +45,6 @@ static struct spi_board_info wm1253_devs[] = {
 		.chip_select	= 0,
 		.mode		= SPI_MODE_0,
 		.irq		= S3C_EINT(4),
-		.controller_data = &wm0010_spi_csinfo,
 		.platform_data = &wm0010_pdata,
 	},
 };
@@ -62,7 +57,6 @@ static struct spi_board_info balblair_devs[] = {
 		.chip_select	= 0,
 		.mode		= SPI_MODE_0,
 		.irq		= S3C_EINT(4),
-		.controller_data = &wm0010_spi_csinfo,
 		.platform_data = &wm0010_pdata,
 	},
 };
@@ -229,10 +223,6 @@ static struct arizona_pdata wm5102_reva_pdata = {
 	},
 };
 
-static struct s3c64xx_spi_csinfo codec_spi_csinfo = {
-	.line = S3C64XX_GPN(5),
-};
-
 static struct spi_board_info wm5102_reva_spi_devs[] = {
 	[0] = {
 		.modalias	= "wm5102",
@@ -242,7 +232,6 @@ static struct spi_board_info wm5102_reva_spi_devs[] = {
 		.mode		= SPI_MODE_0,
 		.irq		= GLENFARCLAS_PMIC_IRQ_BASE +
 				  WM831X_IRQ_GPIO_2,
-		.controller_data = &codec_spi_csinfo,
 		.platform_data = &wm5102_reva_pdata,
 	},
 };
@@ -275,7 +264,6 @@ static struct spi_board_info wm5102_spi_devs[] = {
 		.mode		= SPI_MODE_0,
 		.irq		= GLENFARCLAS_PMIC_IRQ_BASE +
 				  WM831X_IRQ_GPIO_2,
-		.controller_data = &codec_spi_csinfo,
 		.platform_data = &wm5102_pdata,
 	},
 };
@@ -298,7 +286,6 @@ static struct spi_board_info wm5110_spi_devs[] = {
 		.mode		= SPI_MODE_0,
 		.irq		= GLENFARCLAS_PMIC_IRQ_BASE +
 				  WM831X_IRQ_GPIO_2,
-		.controller_data = &codec_spi_csinfo,
 		.platform_data = &wm5102_reva_pdata,
 	},
 };
diff --git a/arch/arm/mach-s3c/mach-crag6410.c b/arch/arm/mach-s3c/mach-crag6410.c
index 4a12c75d407f..9a45474d1bf7 100644
--- a/arch/arm/mach-s3c/mach-crag6410.c
+++ b/arch/arm/mach-s3c/mach-crag6410.c
@@ -47,7 +47,7 @@
 #include "map.h"
 #include "regs-gpio.h"
 #include "gpio-samsung.h"
-#include <mach/irqs.h>
+#include "irqs.h"
 
 #include "fb.h"
 #include "sdhci.h"
@@ -825,6 +825,15 @@ static const struct gpio_led_platform_data gpio_leds_pdata = {
 
 static struct dwc2_hsotg_plat crag6410_hsotg_pdata;
 
+static struct gpiod_lookup_table crag_spi0_gpiod_table = {
+	.dev_id = "s3c6410-spi.0",
+	.table = {
+		GPIO_LOOKUP_IDX("GPIOC", 3, "cs", 0, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("GPION", 5, "cs", 1, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static void __init crag6410_machine_init(void)
 {
 	/* Open drain IRQs need pullups */
@@ -856,7 +865,9 @@ static void __init crag6410_machine_init(void)
 	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
 
 	samsung_keypad_set_platdata(&crag6410_keypad_data);
-	s3c64xx_spi0_set_platdata(NULL, 0, 2);
+
+	gpiod_add_lookup_table(&crag_spi0_gpiod_table);
+	s3c64xx_spi0_set_platdata(0, 2);
 
 	pwm_add_table(crag6410_pwm_lookup, ARRAY_SIZE(crag6410_pwm_lookup));
 	platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices));
diff --git a/arch/arm/mach-s3c/mach-gta02.c b/arch/arm/mach-s3c/mach-gta02.c
index 418939ce0fc3..d50a81d85ae1 100644
--- a/arch/arm/mach-s3c/mach-gta02.c
+++ b/arch/arm/mach-s3c/mach-gta02.c
@@ -421,7 +421,14 @@ static struct s3c2410_platform_nand __initdata gta02_nand_info = {
 /* Get PMU to set USB current limit accordingly. */
 static struct s3c2410_udc_mach_info gta02_udc_cfg __initdata = {
 	.vbus_draw	= gta02_udc_vbus_draw,
-	.pullup_pin = GTA02_GPIO_USB_PULLUP,
+};
+
+static struct gpiod_lookup_table gta02_udc_gpio_table = {
+	.dev_id = "s3c2410-usbgadget",
+	.table = {
+		GPIO_LOOKUP("GPIOB", 9, "pullup", GPIO_ACTIVE_HIGH),
+		{ },
+	},
 };
 
 /* USB */
@@ -555,6 +562,7 @@ static void __init gta02_machine_init(void)
 	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
 			      S3C_GPIO_PULL_NONE);
 
+	gpiod_add_lookup_table(&gta02_udc_gpio_table);
 	gpiod_add_lookup_table(&gta02_audio_gpio_table);
 	gpiod_add_lookup_table(&gta02_mmc_gpio_table);
 	platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices));
@@ -572,6 +580,7 @@ static void __init gta02_init_time(void)
 MACHINE_START(NEO1973_GTA02, "GTA02")
 	/* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2442,
 	.map_io		= gta02_map_io,
 	.init_irq	= s3c2442_init_irq,
 	.init_machine	= gta02_machine_init,
diff --git a/arch/arm/mach-s3c/mach-h1940.c b/arch/arm/mach-s3c/mach-h1940.c
index 8a43ed1c4c4d..83ac6cfdb1d8 100644
--- a/arch/arm/mach-s3c/mach-h1940.c
+++ b/arch/arm/mach-s3c/mach-h1940.c
@@ -167,9 +167,15 @@ static struct gpio_chip h1940_latch_gpiochip = {
 };
 
 static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = {
-	.vbus_pin		= S3C2410_GPG(5),
-	.vbus_pin_inverted	= 1,
-	.pullup_pin		= H1940_LATCH_USB_DP,
+};
+
+static struct gpiod_lookup_table h1940_udc_gpio_table = {
+	.dev_id = "s3c2410-usbgadget",
+	.table = {
+		GPIO_LOOKUP("GPIOG", 5, "vbus", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("H1940_LATCH", 7, "pullup", GPIO_ACTIVE_HIGH),
+		{ },
+	},
 };
 
 static struct s3c2410_ts_mach_info h1940_ts_cfg __initdata = {
@@ -725,6 +731,7 @@ static void __init h1940_init(void)
 	u32 tmp;
 
 	s3c24xx_fb_set_platdata(&h1940_fb_info);
+	gpiod_add_lookup_table(&h1940_udc_gpio_table);
 	gpiod_add_lookup_table(&h1940_mmc_gpio_table);
 	gpiod_add_lookup_table(&h1940_audio_gpio_table);
 	gpiod_add_lookup_table(&h1940_bat_gpio_table);
@@ -793,6 +800,7 @@ static void __init h1940_init(void)
 MACHINE_START(H1940, "IPAQ-H1940")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2410,
 	.map_io		= h1940_map_io,
 	.reserve	= h1940_reserve,
 	.init_irq	= s3c2410_init_irq,
diff --git a/arch/arm/mach-s3c/mach-hmt.c b/arch/arm/mach-s3c/mach-hmt.c
index b287e9987311..49ba16c447aa 100644
--- a/arch/arm/mach-s3c/mach-hmt.c
+++ b/arch/arm/mach-s3c/mach-hmt.c
@@ -26,7 +26,7 @@
 
 #include <video/samsung_fimd.h>
 #include "map.h"
-#include <mach/irqs.h>
+#include "irqs.h"
 
 #include <asm/irq.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-s3c/mach-jive.c b/arch/arm/mach-s3c/mach-jive.c
index 285e1f0f4145..16859bb3bb13 100644
--- a/arch/arm/mach-s3c/mach-jive.c
+++ b/arch/arm/mach-s3c/mach-jive.c
@@ -236,11 +236,11 @@ static int __init jive_mtdset(char *options)
 	unsigned long set;
 
 	if (options == NULL || options[0] == '\0')
-		return 0;
+		return 1;
 
 	if (kstrtoul(options, 10, &set)) {
 		printk(KERN_ERR "failed to parse mtdset=%s\n", options);
-		return 0;
+		return 1;
 	}
 
 	switch (set) {
@@ -256,7 +256,7 @@ static int __init jive_mtdset(char *options)
 		       "using default.", set);
 	}
 
-	return 0;
+	return 1;
 }
 
 /* parse the mtdset= option given to the kernel command line */
@@ -493,7 +493,14 @@ static struct platform_device *jive_devices[] __initdata = {
 };
 
 static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = {
-	.vbus_pin	= S3C2410_GPG(1),		/* detect is on GPG1 */
+};
+
+static struct gpiod_lookup_table jive_udc_gpio_table = {
+	.dev_id = "s3c2410-usbgadget",
+	.table = {
+		GPIO_LOOKUP("GPIOG", 1, "vbus", GPIO_ACTIVE_HIGH),
+		{ },
+	},
 };
 
 /* Jive power management device */
@@ -669,6 +676,7 @@ static void __init jive_machine_init(void)
 
 	pm_power_off = jive_power_off;
 
+	gpiod_add_lookup_table(&jive_udc_gpio_table);
 	gpiod_add_lookup_table(&jive_lcdspi_gpiod_table);
 	gpiod_add_lookup_table(&jive_wm8750_gpiod_table);
 	platform_add_devices(jive_devices, ARRAY_SIZE(jive_devices));
@@ -677,7 +685,7 @@ static void __init jive_machine_init(void)
 MACHINE_START(JIVE, "JIVE")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
 	.atag_offset	= 0x100,
-
+	.nr_irqs	= NR_IRQS_S3C2412,
 	.init_irq	= s3c2412_init_irq,
 	.map_io		= jive_map_io,
 	.init_machine	= jive_machine_init,
diff --git a/arch/arm/mach-s3c/mach-mini2440.c b/arch/arm/mach-s3c/mach-mini2440.c
index 551ec660ab59..283be70ca622 100644
--- a/arch/arm/mach-s3c/mach-mini2440.c
+++ b/arch/arm/mach-s3c/mach-mini2440.c
@@ -35,7 +35,7 @@
 
 #include "regs-gpio.h"
 #include <linux/platform_data/leds-s3c24xx.h>
-#include <mach/irqs.h>
+#include "irqs.h"
 #include "gpio-samsung.h"
 #include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <linux/platform_data/i2c-s3c2410.h>
@@ -93,9 +93,15 @@ static struct s3c2410_uartcfg mini2440_uartcfgs[] __initdata = {
 /* USB device UDC support */
 
 static struct s3c2410_udc_mach_info mini2440_udc_cfg __initdata = {
-	.pullup_pin = S3C2410_GPC(5),
 };
 
+static struct gpiod_lookup_table mini2440_udc_gpio_table = {
+	.dev_id = "s3c2410-usbgadget",
+	.table = {
+		GPIO_LOOKUP("GPIOC", 5, "pullup", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
 
 /* LCD timing and setup */
 
@@ -624,7 +630,7 @@ static char mini2440_features_str[12] __initdata = "0tb";
 static int __init mini2440_features_setup(char *str)
 {
 	if (str)
-		strlcpy(mini2440_features_str, str,
+		strscpy(mini2440_features_str, str,
 			sizeof(mini2440_features_str));
 	return 1;
 }
@@ -755,6 +761,7 @@ static void __init mini2440_init(void)
 		s3c24xx_fb_set_platdata(&mini2440_fb_info);
 	}
 
+	gpiod_add_lookup_table(&mini2440_udc_gpio_table);
 	s3c24xx_udc_set_platdata(&mini2440_udc_cfg);
 	gpiod_add_lookup_table(&mini2440_mmc_gpio_table);
 	s3c24xx_mci_set_platdata(&mini2440_mmc_cfg);
@@ -789,6 +796,7 @@ static void __init mini2440_init(void)
 MACHINE_START(MINI2440, "MINI2440")
 	/* Maintainer: Michel Pollet <buserror@gmail.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2440,
 	.map_io		= mini2440_map_io,
 	.init_machine	= mini2440_init,
 	.init_irq	= s3c2440_init_irq,
diff --git a/arch/arm/mach-s3c/mach-mini6410.c b/arch/arm/mach-s3c/mach-mini6410.c
index c14c2e27127b..058ae9e8b89f 100644
--- a/arch/arm/mach-s3c/mach-mini6410.c
+++ b/arch/arm/mach-s3c/mach-mini6410.c
@@ -35,7 +35,7 @@
 #include <linux/platform_data/mmc-sdhci-s3c.h>
 #include "sdhci.h"
 #include <linux/platform_data/touchscreen-s3c2410.h>
-#include <mach/irqs.h>
+#include "irqs.h"
 
 #include <video/platform_lcd.h>
 #include <video/samsung_fimd.h>
diff --git a/arch/arm/mach-s3c/mach-n30.c b/arch/arm/mach-s3c/mach-n30.c
index e40c1fcf418c..90122fc6b2aa 100644
--- a/arch/arm/mach-s3c/mach-n30.c
+++ b/arch/arm/mach-s3c/mach-n30.c
@@ -84,9 +84,15 @@ static struct s3c2410_uartcfg n30_uartcfgs[] = {
 };
 
 static struct s3c2410_udc_mach_info n30_udc_cfg __initdata = {
-	.vbus_pin		= S3C2410_GPG(1),
-	.vbus_pin_inverted	= 0,
-	.pullup_pin		= S3C2410_GPB(3),
+};
+
+static struct gpiod_lookup_table n30_udc_gpio_table = {
+	.dev_id = "s3c2410-usbgadget",
+	.table = {
+		GPIO_LOOKUP("GPIOG", 1, "vbus", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("GPIOB", 3, "pullup", GPIO_ACTIVE_HIGH),
+		{ },
+	},
 };
 
 static struct gpio_keys_button n30_buttons[] = {
@@ -595,6 +601,7 @@ static void __init n30_init(void)
 	WARN_ON(gpio_request(S3C2410_GPG(4), "mmc power"));
 
 	s3c24xx_fb_set_platdata(&n30_fb_info);
+	gpiod_add_lookup_table(&n30_udc_gpio_table);
 	s3c24xx_udc_set_platdata(&n30_udc_cfg);
 	gpiod_add_lookup_table(&n30_mci_gpio_table);
 	s3c24xx_mci_set_platdata(&n30_mci_cfg);
@@ -656,6 +663,7 @@ MACHINE_START(N30, "Acer-N30")
 				Ben Dooks <ben-linux@fluff.org>
 	*/
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2410,
 	.init_time	= n30_init_time,
 	.init_machine	= n30_init,
 	.init_irq	= s3c2410_init_irq,
@@ -666,6 +674,7 @@ MACHINE_START(N35, "Acer-N35")
 	/* Maintainer: Christer Weinigel <christer@weinigel.se>
 	*/
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2410,
 	.init_time	= n30_init_time,
 	.init_machine	= n30_init,
 	.init_irq	= s3c2410_init_irq,
diff --git a/arch/arm/mach-s3c/mach-ncp.c b/arch/arm/mach-s3c/mach-ncp.c
index 1a45bed56622..1e65f8bce5c4 100644
--- a/arch/arm/mach-s3c/mach-ncp.c
+++ b/arch/arm/mach-s3c/mach-ncp.c
@@ -24,7 +24,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/irqs.h>
+#include "irqs.h"
 #include "map.h"
 
 #include <asm/irq.h>
diff --git a/arch/arm/mach-s3c/mach-nexcoder.c b/arch/arm/mach-s3c/mach-nexcoder.c
index 2a454c919658..d17a3fcb7425 100644
--- a/arch/arm/mach-s3c/mach-nexcoder.c
+++ b/arch/arm/mach-s3c/mach-nexcoder.c
@@ -154,6 +154,7 @@ static void __init nexcoder_init(void)
 MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
 	/* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2440,
 	.map_io		= nexcoder_map_io,
 	.init_machine	= nexcoder_init,
 	.init_irq	= s3c2440_init_irq,
diff --git a/arch/arm/mach-s3c/mach-osiris.c b/arch/arm/mach-s3c/mach-osiris.c
index 3aefb9d22340..d900d1354de1 100644
--- a/arch/arm/mach-s3c/mach-osiris.c
+++ b/arch/arm/mach-s3c/mach-osiris.c
@@ -58,11 +58,6 @@ static struct map_desc osiris_iodesc[] __initdata = {
 	  .pfn		= __phys_to_pfn(S3C2410_CS5),
 	  .length	= SZ_16M,
 	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)S3C24XX_VA_ISA_WORD,
-	  .pfn		= __phys_to_pfn(S3C2410_CS5),
-	  .length	= SZ_16M,
-	  .type		= MT_DEVICE,
   },
 
   /* CPLD control registers */
@@ -402,6 +397,7 @@ static void __init osiris_init(void)
 MACHINE_START(OSIRIS, "Simtec-OSIRIS")
 	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2440,
 	.map_io		= osiris_map_io,
 	.init_irq	= s3c2440_init_irq,
 	.init_machine	= osiris_init,
diff --git a/arch/arm/mach-s3c/mach-otom.c b/arch/arm/mach-s3c/mach-otom.c
index 460ee97766cd..3a2db2f58833 100644
--- a/arch/arm/mach-s3c/mach-otom.c
+++ b/arch/arm/mach-s3c/mach-otom.c
@@ -116,6 +116,7 @@ static void __init otom11_init(void)
 MACHINE_START(OTOM, "Nex Vision - Otom 1.1")
 	/* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2410,
 	.map_io		= otom11_map_io,
 	.init_machine	= otom11_init,
 	.init_irq	= s3c2410_init_irq,
diff --git a/arch/arm/mach-s3c/mach-qt2410.c b/arch/arm/mach-s3c/mach-qt2410.c
index f88b961798fd..36fe0684a438 100644
--- a/arch/arm/mach-s3c/mach-qt2410.c
+++ b/arch/arm/mach-s3c/mach-qt2410.c
@@ -367,6 +367,7 @@ static void __init qt2410_machine_init(void)
 
 MACHINE_START(QT2410, "QT2410")
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2410,
 	.map_io		= qt2410_map_io,
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= qt2410_machine_init,
diff --git a/arch/arm/mach-s3c/mach-real6410.c b/arch/arm/mach-s3c/mach-real6410.c
index 9d218a53d631..8c10ebc38a9c 100644
--- a/arch/arm/mach-s3c/mach-real6410.c
+++ b/arch/arm/mach-s3c/mach-real6410.c
@@ -27,7 +27,7 @@
 #include "map.h"
 #include "regs-gpio.h"
 #include "gpio-samsung.h"
-#include <mach/irqs.h>
+#include "irqs.h"
 
 #include <linux/soc/samsung/s3c-adc.h>
 #include "cpu.h"
diff --git a/arch/arm/mach-s3c/mach-rx1950.c b/arch/arm/mach-s3c/mach-rx1950.c
index 313e080e179e..d8c49e562660 100644
--- a/arch/arm/mach-s3c/mach-rx1950.c
+++ b/arch/arm/mach-s3c/mach-rx1950.c
@@ -643,9 +643,15 @@ static struct s3c2410_platform_nand rx1950_nand_info = {
 };
 
 static struct s3c2410_udc_mach_info rx1950_udc_cfg __initdata = {
-	.vbus_pin = S3C2410_GPG(5),
-	.vbus_pin_inverted = 1,
-	.pullup_pin = S3C2410_GPJ(5),
+};
+
+static struct gpiod_lookup_table rx1950_udc_gpio_table = {
+	.dev_id = "s3c2410-usbgadget",
+	.table = {
+		GPIO_LOOKUP("GPIOG", 5, "vbus", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("GPIOJ", 5, "pullup", GPIO_ACTIVE_HIGH),
+		{ },
+	},
 };
 
 static struct s3c2410_ts_mach_info rx1950_ts_cfg __initdata = {
@@ -847,6 +853,7 @@ static void __init rx1950_init_machine(void)
 	gpio_direction_output(S3C2410_GPJ(6), 0);
 
 	pwm_add_table(rx1950_pwm_lookup, ARRAY_SIZE(rx1950_pwm_lookup));
+	gpiod_add_lookup_table(&rx1950_udc_gpio_table);
 	gpiod_add_lookup_table(&rx1950_audio_gpio_table);
 	gpiod_add_lookup_table(&rx1950_bat_gpio_table);
 	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
@@ -868,6 +875,7 @@ static void __init rx1950_reserve(void)
 MACHINE_START(RX1950, "HP iPAQ RX1950")
     /* Maintainers: Vasily Khoruzhick */
 	.atag_offset = 0x100,
+	.nr_irqs	= NR_IRQS_S3C2442,
 	.map_io = rx1950_map_io,
 	.reserve	= rx1950_reserve,
 	.init_irq	= s3c2442_init_irq,
diff --git a/arch/arm/mach-s3c/mach-rx3715.c b/arch/arm/mach-s3c/mach-rx3715.c
index 9fd2d9dc3689..52b3c38acbb2 100644
--- a/arch/arm/mach-s3c/mach-rx3715.c
+++ b/arch/arm/mach-s3c/mach-rx3715.c
@@ -48,13 +48,7 @@
 
 static struct map_desc rx3715_iodesc[] __initdata = {
 	/* dump ISA space somewhere unused */
-
 	{
-		.virtual	= (u32)S3C24XX_VA_ISA_WORD,
-		.pfn		= __phys_to_pfn(S3C2410_CS3),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE,
-	}, {
 		.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
 		.pfn		= __phys_to_pfn(S3C2410_CS3),
 		.length		= SZ_1M,
@@ -210,6 +204,7 @@ static void __init rx3715_init_machine(void)
 MACHINE_START(RX3715, "IPAQ-RX3715")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2440,
 	.map_io		= rx3715_map_io,
 	.reserve	= rx3715_reserve,
 	.init_irq	= s3c2440_init_irq,
diff --git a/arch/arm/mach-s3c/mach-smartq5.c b/arch/arm/mach-s3c/mach-smartq5.c
index 8c940227e810..ce3fce0bba20 100644
--- a/arch/arm/mach-s3c/mach-smartq5.c
+++ b/arch/arm/mach-s3c/mach-smartq5.c
@@ -14,7 +14,7 @@
 #include <asm/mach/arch.h>
 
 #include <video/samsung_fimd.h>
-#include <mach/irqs.h>
+#include "irqs.h"
 #include "map.h"
 #include "regs-gpio.h"
 #include "gpio-samsung.h"
diff --git a/arch/arm/mach-s3c/mach-smartq7.c b/arch/arm/mach-s3c/mach-smartq7.c
index ab243969d6d0..78ca0e704797 100644
--- a/arch/arm/mach-s3c/mach-smartq7.c
+++ b/arch/arm/mach-s3c/mach-smartq7.c
@@ -14,7 +14,7 @@
 #include <asm/mach/arch.h>
 
 #include <video/samsung_fimd.h>
-#include <mach/irqs.h>
+#include "irqs.h"
 #include "map.h"
 #include "regs-gpio.h"
 #include "gpio-samsung.h"
diff --git a/arch/arm/mach-s3c/mach-smdk2410.c b/arch/arm/mach-s3c/mach-smdk2410.c
index ca83d5a7d101..76b0a8846616 100644
--- a/arch/arm/mach-s3c/mach-smdk2410.c
+++ b/arch/arm/mach-s3c/mach-smdk2410.c
@@ -104,6 +104,7 @@ MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switc
 				    * to SMDK2410 */
 	/* Maintainer: Jonas Dietsche */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2410,
 	.map_io		= smdk2410_map_io,
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= smdk2410_init,
diff --git a/arch/arm/mach-s3c/mach-smdk2413.c b/arch/arm/mach-s3c/mach-smdk2413.c
index c43095b321d7..2b4e20aaa346 100644
--- a/arch/arm/mach-s3c/mach-smdk2413.c
+++ b/arch/arm/mach-s3c/mach-smdk2413.c
@@ -12,7 +12,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
-#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/serial_core.h>
 #include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
@@ -74,9 +74,15 @@ static struct s3c2410_uartcfg smdk2413_uartcfgs[] __initdata = {
 
 
 static struct s3c2410_udc_mach_info smdk2413_udc_cfg __initdata = {
-	.pullup_pin = S3C2410_GPF(2),
 };
 
+static struct gpiod_lookup_table smdk2413_udc_gpio_table = {
+	.dev_id = "s3c2410-usbgadget",
+	.table = {
+		GPIO_LOOKUP("GPIOF", 2, "pullup", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
 
 static struct platform_device *smdk2413_devices[] __initdata = {
 	&s3c_device_ohci,
@@ -115,7 +121,7 @@ static void __init smdk2413_machine_init(void)
 			      S3C2410_MISCCR_USBSUSPND0 |
 			      S3C2410_MISCCR_USBSUSPND1, 0x0);
 
-
+	gpiod_add_lookup_table(&smdk2413_udc_gpio_table);
  	s3c24xx_udc_set_platdata(&smdk2413_udc_cfg);
 	s3c_i2c0_set_platdata(NULL);
 	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
@@ -129,6 +135,7 @@ static void __init smdk2413_machine_init(void)
 MACHINE_START(S3C2413, "S3C2413")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2412,
 
 	.fixup		= smdk2413_fixup,
 	.init_irq	= s3c2412_init_irq,
@@ -140,6 +147,7 @@ MACHINE_END
 MACHINE_START(SMDK2412, "SMDK2412")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2412,
 
 	.fixup		= smdk2413_fixup,
 	.init_irq	= s3c2412_init_irq,
@@ -151,6 +159,7 @@ MACHINE_END
 MACHINE_START(SMDK2413, "SMDK2413")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2412,
 
 	.fixup		= smdk2413_fixup,
 	.init_irq	= s3c2412_init_irq,
diff --git a/arch/arm/mach-s3c/mach-smdk2416.c b/arch/arm/mach-s3c/mach-smdk2416.c
index 4d883a792cc6..329fe26be268 100644
--- a/arch/arm/mach-s3c/mach-smdk2416.c
+++ b/arch/arm/mach-s3c/mach-smdk2416.c
@@ -53,16 +53,6 @@ static struct map_desc smdk2416_iodesc[] __initdata = {
 	/* ISA IO Space map (memory space selected by A24) */
 
 	{
-		.virtual	= (u32)S3C24XX_VA_ISA_WORD,
-		.pfn		= __phys_to_pfn(S3C2410_CS2),
-		.length		= 0x10000,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (u32)S3C24XX_VA_ISA_WORD + 0x10000,
-		.pfn		= __phys_to_pfn(S3C2410_CS2 + (1<<24)),
-		.length		= SZ_4M,
-		.type		= MT_DEVICE,
-	}, {
 		.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
 		.pfn		= __phys_to_pfn(S3C2410_CS2),
 		.length		= 0x10000,
@@ -249,6 +239,7 @@ static void __init smdk2416_machine_init(void)
 MACHINE_START(SMDK2416, "SMDK2416")
 	/* Maintainer: Yauhen Kharuzhy <jekhor@gmail.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2416,
 
 	.init_irq	= s3c2416_init_irq,
 	.map_io		= smdk2416_map_io,
diff --git a/arch/arm/mach-s3c/mach-smdk2440.c b/arch/arm/mach-s3c/mach-smdk2440.c
index 7f6fe0db04f3..6aea769ebde1 100644
--- a/arch/arm/mach-s3c/mach-smdk2440.c
+++ b/arch/arm/mach-s3c/mach-smdk2440.c
@@ -43,16 +43,6 @@ static struct map_desc smdk2440_iodesc[] __initdata = {
 	/* ISA IO Space map (memory space selected by A24) */
 
 	{
-		.virtual	= (u32)S3C24XX_VA_ISA_WORD,
-		.pfn		= __phys_to_pfn(S3C2410_CS2),
-		.length		= 0x10000,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (u32)S3C24XX_VA_ISA_WORD + 0x10000,
-		.pfn		= __phys_to_pfn(S3C2410_CS2 + (1<<24)),
-		.length		= SZ_4M,
-		.type		= MT_DEVICE,
-	}, {
 		.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
 		.pfn		= __phys_to_pfn(S3C2410_CS2),
 		.length		= 0x10000,
@@ -181,6 +171,7 @@ static void __init smdk2440_machine_init(void)
 MACHINE_START(S3C2440, "SMDK2440")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2440,
 
 	.init_irq	= s3c2440_init_irq,
 	.map_io		= smdk2440_map_io,
diff --git a/arch/arm/mach-s3c/mach-smdk2443.c b/arch/arm/mach-s3c/mach-smdk2443.c
index fc54c91ade56..075140f8f760 100644
--- a/arch/arm/mach-s3c/mach-smdk2443.c
+++ b/arch/arm/mach-s3c/mach-smdk2443.c
@@ -40,16 +40,6 @@ static struct map_desc smdk2443_iodesc[] __initdata = {
 	/* ISA IO Space map (memory space selected by A24) */
 
 	{
-		.virtual	= (u32)S3C24XX_VA_ISA_WORD,
-		.pfn		= __phys_to_pfn(S3C2410_CS2),
-		.length		= 0x10000,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (u32)S3C24XX_VA_ISA_WORD + 0x10000,
-		.pfn		= __phys_to_pfn(S3C2410_CS2 + (1<<24)),
-		.length		= SZ_4M,
-		.type		= MT_DEVICE,
-	}, {
 		.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
 		.pfn		= __phys_to_pfn(S3C2410_CS2),
 		.length		= 0x10000,
@@ -128,7 +118,7 @@ static void __init smdk2443_machine_init(void)
 MACHINE_START(SMDK2443, "SMDK2443")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
 	.atag_offset	= 0x100,
-
+	.nr_irqs	= NR_IRQS_S3C2443,
 	.init_irq	= s3c2443_init_irq,
 	.map_io		= smdk2443_map_io,
 	.init_machine	= smdk2443_machine_init,
diff --git a/arch/arm/mach-s3c/mach-smdk6400.c b/arch/arm/mach-s3c/mach-smdk6400.c
index 827221398d6c..a3c1b2a82455 100644
--- a/arch/arm/mach-s3c/mach-smdk6400.c
+++ b/arch/arm/mach-s3c/mach-smdk6400.c
@@ -22,7 +22,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/irqs.h>
+#include "irqs.h"
 #include "map.h"
 
 #include "devs.h"
diff --git a/arch/arm/mach-s3c/mach-smdk6410.c b/arch/arm/mach-s3c/mach-smdk6410.c
index ae18c1375c9c..e57b2bb61484 100644
--- a/arch/arm/mach-s3c/mach-smdk6410.c
+++ b/arch/arm/mach-s3c/mach-smdk6410.c
@@ -45,7 +45,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/irqs.h>
+#include "irqs.h"
 #include "map.h"
 
 #include <asm/irq.h>
diff --git a/arch/arm/mach-s3c/mach-tct_hammer.c b/arch/arm/mach-s3c/mach-tct_hammer.c
index 2a61df316e8c..93ab1abd8bd3 100644
--- a/arch/arm/mach-s3c/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c/mach-tct_hammer.c
@@ -149,6 +149,7 @@ static void __init tct_hammer_init(void)
 
 MACHINE_START(TCT_HAMMER, "TCT_HAMMER")
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2410,
 	.map_io		= tct_hammer_map_io,
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= tct_hammer_init,
diff --git a/arch/arm/mach-s3c/mach-vr1000.c b/arch/arm/mach-s3c/mach-vr1000.c
index 5c3d07cf2e79..c85033e6ef8f 100644
--- a/arch/arm/mach-s3c/mach-vr1000.c
+++ b/arch/arm/mach-s3c/mach-vr1000.c
@@ -67,11 +67,6 @@ static struct map_desc vr1000_iodesc[] __initdata = {
 	  .pfn		= PA_CS2(BAST_PA_ISAIO),
 	  .length	= SZ_16M,
 	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)S3C24XX_VA_ISA_WORD,
-	  .pfn		= PA_CS3(BAST_PA_ISAIO),
-	  .length	= SZ_16M,
-	  .type		= MT_DEVICE,
   },
 
   /*  CPLD control registers, and external interrupt controls */
@@ -361,6 +356,7 @@ static void __init vr1000_init(void)
 MACHINE_START(VR1000, "Thorcom-VR1000")
 	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2410,
 	.map_io		= vr1000_map_io,
 	.init_machine	= vr1000_init,
 	.init_irq	= s3c2410_init_irq,
diff --git a/arch/arm/mach-s3c/mach-vstms.c b/arch/arm/mach-s3c/mach-vstms.c
index ec024af7b0ce..6f878418be3e 100644
--- a/arch/arm/mach-s3c/mach-vstms.c
+++ b/arch/arm/mach-s3c/mach-vstms.c
@@ -156,6 +156,7 @@ static void __init vstms_init(void)
 
 MACHINE_START(VSTMS, "VSTMS")
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_IRQS_S3C2412,
 
 	.fixup		= vstms_fixup,
 	.init_irq	= s3c2412_init_irq,
diff --git a/arch/arm/mach-s3c/include/mach/map-base.h b/arch/arm/mach-s3c/map-base.h
index 34b39ded0e2e..463a995b399b 100644
--- a/arch/arm/mach-s3c/include/mach/map-base.h
+++ b/arch/arm/mach-s3c/map-base.h
@@ -33,6 +33,12 @@
 #define S3C_VA_WATCHDOG	S3C_ADDR(0x00400000)	/* watchdog */
 #define S3C_VA_UART	S3C_ADDR(0x01000000)	/* UART */
 
+/* ISA device mapping for BAST to use with inb()/outb() on 8-bit I/O.
+ * 16-bit I/O on BAST now requires driver modifications to manually
+ * ioremap CS3.
+ */
+#define S3C24XX_VA_ISA_BYTE	PCI_IOBASE
+
 /* This is used for the CPU specific mappings that may be needed, so that
  * they do not need to directly used S3C_ADDR() and thus make it easier to
  * modify the space for mapping.
diff --git a/arch/arm/mach-s3c/map-s3c24xx.h b/arch/arm/mach-s3c/map-s3c24xx.h
index b5dba78a9dd7..f8d075b11d6f 100644
--- a/arch/arm/mach-s3c/map-s3c24xx.h
+++ b/arch/arm/mach-s3c/map-s3c24xx.h
@@ -9,7 +9,7 @@
 #ifndef __ASM_ARCH_MAP_H
 #define __ASM_ARCH_MAP_H
 
-#include <mach/map-base.h>
+#include "map-base.h"
 #include "map-s3c.h"
 
 /*
diff --git a/arch/arm/mach-s3c/map-s3c64xx.h b/arch/arm/mach-s3c/map-s3c64xx.h
index d7740d2a77c4..9de1c58bcb06 100644
--- a/arch/arm/mach-s3c/map-s3c64xx.h
+++ b/arch/arm/mach-s3c/map-s3c64xx.h
@@ -11,7 +11,7 @@
 #ifndef __ASM_ARCH_MAP_H
 #define __ASM_ARCH_MAP_H __FILE__
 
-#include <mach/map-base.h>
+#include "map-base.h"
 #include "map-s3c.h"
 
 /*
diff --git a/arch/arm/mach-s3c/pl080.c b/arch/arm/mach-s3c/pl080.c
index 4730f080c736..0a14f77b24c1 100644
--- a/arch/arm/mach-s3c/pl080.c
+++ b/arch/arm/mach-s3c/pl080.c
@@ -11,7 +11,7 @@
 #include <linux/of.h>
 
 #include "cpu.h"
-#include <mach/irqs.h>
+#include "irqs.h"
 #include "map.h"
 
 #include "regs-sys-s3c64xx.h"
diff --git a/arch/arm/mach-s3c/pm-core-s3c24xx.h b/arch/arm/mach-s3c/pm-core-s3c24xx.h
index bcb7978a4e85..a71ed5711019 100644
--- a/arch/arm/mach-s3c/pm-core-s3c24xx.h
+++ b/arch/arm/mach-s3c/pm-core-s3c24xx.h
@@ -12,7 +12,7 @@
 
 #include "regs-clock.h"
 #include "regs-irq-s3c24xx.h"
-#include <mach/irqs.h>
+#include "irqs.h"
 
 static inline void s3c_pm_debug_init_uart(void)
 {
diff --git a/arch/arm/mach-s3c/pm-s3c2412.c b/arch/arm/mach-s3c/pm-s3c2412.c
index 6a9604477c9e..ed3b4cfc7c0f 100644
--- a/arch/arm/mach-s3c/pm-s3c2412.c
+++ b/arch/arm/mach-s3c/pm-s3c2412.c
@@ -19,7 +19,7 @@
 #include <asm/cacheflush.h>
 #include <asm/irq.h>
 
-#include <mach/irqs.h>
+#include "irqs.h"
 #include "regs-gpio.h"
 
 #include "cpu.h"
diff --git a/arch/arm/mach-s3c/pm-s3c64xx.c b/arch/arm/mach-s3c/pm-s3c64xx.c
index 4f1778123dee..7bc7417fd803 100644
--- a/arch/arm/mach-s3c/pm-s3c64xx.c
+++ b/arch/arm/mach-s3c/pm-s3c64xx.c
@@ -15,7 +15,7 @@
 #include <linux/pm_domain.h>
 
 #include "map.h"
-#include <mach/irqs.h>
+#include "irqs.h"
 
 #include "cpu.h"
 #include "devs.h"
@@ -323,7 +323,7 @@ void s3c_pm_arch_update_uart(void __iomem *regs, struct pm_uart_save *save)
 
 	/* S3C64XX UART blocks only support level interrupts, so ensure that
 	 * when we restore unused UART blocks we force the level interrupt
-	 * settigs. */
+	 * settings. */
 	save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL;
 
 	/* We have a constraint on changing the clock type of the UART
diff --git a/arch/arm/mach-s3c/pm.c b/arch/arm/mach-s3c/pm.c
index c563bb9d92be..06f019690d81 100644
--- a/arch/arm/mach-s3c/pm.c
+++ b/arch/arm/mach-s3c/pm.c
@@ -21,7 +21,7 @@
 #include "map.h"
 #include "regs-clock.h"
 #include "regs-irq.h"
-#include <mach/irqs.h>
+#include "irqs.h"
 
 #include <asm/irq.h>
 
diff --git a/arch/arm/mach-s3c/s3c2443.c b/arch/arm/mach-s3c/s3c2443.c
index 08f910144246..05c3c298b9f8 100644
--- a/arch/arm/mach-s3c/s3c2443.c
+++ b/arch/arm/mach-s3c/s3c2443.c
@@ -25,7 +25,7 @@
 
 #include "map.h"
 #include "gpio-samsung.h"
-#include <mach/irqs.h>
+#include "irqs.h"
 #include <asm/irq.h>
 #include <asm/system_misc.h>
 
diff --git a/arch/arm/mach-s3c/s3c24xx.c b/arch/arm/mach-s3c/s3c24xx.c
index ccfed48c98aa..819a95364af9 100644
--- a/arch/arm/mach-s3c/s3c24xx.c
+++ b/arch/arm/mach-s3c/s3c24xx.c
@@ -146,7 +146,7 @@ static struct map_desc s3c_iodesc[] __initdata __maybe_unused = {
 	IODESC_ENT(UART)
 };
 
-/* read cpu identificaiton code */
+/* read cpu identification code */
 
 static unsigned long s3c24xx_read_idcode_v5(void)
 {
@@ -678,3 +678,10 @@ struct platform_device s3c2410_device_dclk = {
 	},
 };
 #endif
+
+#ifndef CONFIG_COMPILE_TEST
+#pragma message "The platform is deprecated and scheduled for removal. " \
+		"Please reach to the maintainers of the platform " \
+		"and linux-samsung-soc@vger.kernel.org if you still use it." \
+		"Without such feedback, the platform will be removed after 2022."
+#endif
diff --git a/arch/arm/mach-s3c/s3c24xx.h b/arch/arm/mach-s3c/s3c24xx.h
index 5848bef5bb49..34dd4ac507e9 100644
--- a/arch/arm/mach-s3c/s3c24xx.h
+++ b/arch/arm/mach-s3c/s3c24xx.h
@@ -10,7 +10,7 @@
 #define __ARCH_ARM_MACH_S3C24XX_COMMON_H __FILE__
 
 #include <linux/reboot.h>
-#include <mach/irqs.h>
+#include "irqs.h"
 
 struct s3c2410_uartcfg;
 
diff --git a/arch/arm/mach-s3c/s3c64xx.c b/arch/arm/mach-s3c/s3c64xx.c
index 4dfb648142f2..0a8116c108fe 100644
--- a/arch/arm/mach-s3c/s3c64xx.c
+++ b/arch/arm/mach-s3c/s3c64xx.c
@@ -36,7 +36,7 @@
 #include <asm/system_misc.h>
 
 #include "map.h"
-#include <mach/irqs.h>
+#include "irqs.h"
 #include "regs-gpio.h"
 #include "gpio-samsung.h"
 
@@ -425,3 +425,10 @@ static int __init s3c64xx_init_irq_eint(void)
 	return 0;
 }
 arch_initcall(s3c64xx_init_irq_eint);
+
+#ifndef CONFIG_COMPILE_TEST
+#pragma message "The platform is deprecated and scheduled for removal. " \
+		"Please reach to the maintainers of the platform " \
+		"and linux-samsung-soc@vger.kernel.org if you still use it." \
+		"Without such feedback, the platform will be removed after 2024."
+#endif
diff --git a/arch/arm/mach-s3c/setup-spi-s3c64xx.c b/arch/arm/mach-s3c/setup-spi-s3c64xx.c
index efcf78d41585..497aff71c29c 100644
--- a/arch/arm/mach-s3c/setup-spi-s3c64xx.c
+++ b/arch/arm/mach-s3c/setup-spi-s3c64xx.c
@@ -16,12 +16,3 @@ int s3c64xx_spi0_cfg_gpio(void)
 	return 0;
 }
 #endif
-
-#ifdef CONFIG_S3C64XX_DEV_SPI1
-int s3c64xx_spi1_cfg_gpio(void)
-{
-	s3c_gpio_cfgall_range(S3C64XX_GPC(4), 3,
-				S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-	return 0;
-}
-#endif
diff --git a/arch/arm/mach-s3c/simtec-usb.c b/arch/arm/mach-s3c/simtec-usb.c
index 18fe0642743a..76cedb5c7373 100644
--- a/arch/arm/mach-s3c/simtec-usb.c
+++ b/arch/arm/mach-s3c/simtec-usb.c
@@ -24,7 +24,7 @@
 #include <asm/mach/irq.h>
 
 #include "gpio-samsung.h"
-#include <mach/irqs.h>
+#include "irqs.h"
 #include <asm/irq.h>
 
 #include <linux/platform_data/usb-ohci-s3c2410.h>
diff --git a/arch/arm/mach-s3c/spi-core-s3c24xx.h b/arch/arm/mach-s3c/spi-core-s3c24xx.h
index 057667469cc3..919c5fd0c9af 100644
--- a/arch/arm/mach-s3c/spi-core-s3c24xx.h
+++ b/arch/arm/mach-s3c/spi-core-s3c24xx.h
@@ -16,12 +16,6 @@ static inline void s3c24xx_spi_setname(char *name)
 #ifdef CONFIG_S3C64XX_DEV_SPI0
 	s3c64xx_device_spi0.name = name;
 #endif
-#ifdef CONFIG_S3C64XX_DEV_SPI1
-	s3c64xx_device_spi1.name = name;
-#endif
-#ifdef CONFIG_S3C64XX_DEV_SPI2
-	s3c64xx_device_spi2.name = name;
-#endif
 }
 
 #endif /* __PLAT_S3C_SPI_CORE_S3C24XX_H */
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
index 66e79fa9ba2b..fb9cd10705de 100644
--- a/arch/arm/mach-sa1100/Kconfig
+++ b/arch/arm/mach-sa1100/Kconfig
@@ -1,7 +1,25 @@
 # SPDX-License-Identifier: GPL-2.0-only
-if ARCH_SA1100
+menuconfig ARCH_SA1100
+	bool "SA11x0 Implementations"
+	depends on ARCH_MULTI_V4 && !(ARCH_MULTI_V4T || ARCH_MULTI_V5)
+	depends on !(ARCH_MOXART || ARCH_GEMINI)
+	depends on ATAGS
+	depends on CPU_LITTLE_ENDIAN
+	depends on MMU
+	select ARCH_NO_SG_CHAIN
+	select ARCH_MTD_XIP
+	select CLKSRC_MMIO
+	select CLKSRC_PXA
+	select CPU_FREQ
+	select CPU_SA1100
+	select GPIOLIB
+	select IRQ_DOMAIN
+	select ISA
+	select NEED_MACH_MEMORY_H
+	help
+	  Support for StrongARM 11x0 based boards.
 
-menu "SA11x0 Implementations"
+if ARCH_SA1100
 
 config SA1100_ASSABET
 	bool "Assabet"
@@ -25,6 +43,7 @@ config ASSABET_NEPONSET
 
 config SA1100_CERF
 	bool "CerfBoard"
+	depends on UNUSED_BOARD_FILES
 	select ARM_SA1110_CPUFREQ
 	select LEDS_GPIO_REGISTER
 	help
@@ -62,6 +81,7 @@ config SA1100_COLLIE
 
 config SA1100_H3100
 	bool "Compaq iPAQ H3100"
+	depends on UNUSED_BOARD_FILES
 	select ARM_SA1110_CPUFREQ
 	select HTC_EGPIO
 	select MFD_IPAQ_MICRO
@@ -80,6 +100,7 @@ config SA1100_H3600
 
 config SA1100_BADGE4
 	bool "HP Labs BadgePAD 4"
+	depends on UNUSED_BOARD_FILES
 	select ARM_SA1100_CPUFREQ
 	select SA1111
 	help
@@ -88,6 +109,7 @@ config SA1100_BADGE4
 
 config SA1100_JORNADA720
 	bool "HP Jornada 720"
+	depends on UNUSED_BOARD_FILES
 	# FIXME: select ARM_SA11x0_CPUFREQ
 	select SA1111
 	help
@@ -107,6 +129,7 @@ config SA1100_JORNADA720_SSP
 
 config SA1100_HACKKIT
 	bool "HackKit Core CPU Board"
+	depends on UNUSED_BOARD_FILES
 	select ARM_SA1100_CPUFREQ
 	help
 	  Say Y here to support the HackKit Core CPU Board
@@ -114,6 +137,7 @@ config SA1100_HACKKIT
 
 config SA1100_LART
 	bool "LART"
+	depends on UNUSED_BOARD_FILES
 	select ARM_SA1100_CPUFREQ
 	help
 	  Say Y here if you are using the Linux Advanced Radio Terminal
@@ -122,6 +146,7 @@ config SA1100_LART
 
 config SA1100_NANOENGINE
 	bool "nanoEngine"
+	depends on UNUSED_BOARD_FILES
 	select ARM_SA1110_CPUFREQ
 	select FORCE_PCI
 	select PCI_NANOENGINE
@@ -132,6 +157,7 @@ config SA1100_NANOENGINE
 
 config SA1100_PLEB
 	bool "PLEB"
+	depends on UNUSED_BOARD_FILES
 	select ARM_SA1100_CPUFREQ
 	help
 	  Say Y here if you are using version 1 of the Portable Linux
@@ -141,6 +167,7 @@ config SA1100_PLEB
 
 config SA1100_SHANNON
 	bool "Shannon"
+	depends on UNUSED_BOARD_FILES
 	select ARM_SA1100_CPUFREQ
 	select REGULATOR
 	select REGULATOR_FIXED_VOLTAGE
@@ -152,6 +179,7 @@ config SA1100_SHANNON
 
 config SA1100_SIMPAD
 	bool "Simpad"
+	depends on UNUSED_BOARD_FILES
 	select ARM_SA1110_CPUFREQ
 	help
 	  The SIEMENS webpad SIMpad is based on the StrongARM 1110. There
@@ -163,12 +191,10 @@ config SA1100_SIMPAD
 
 config SA1100_SSP
 	tristate "Generic PIO SSP"
+	depends on UNUSED_BOARD_FILES
 	help
 	  Say Y here to enable support for the generic PIO SSP driver.
 	  This isn't for audio support, but for attached sensors and
 	  other devices, eg for BadgePAD 4 sensor support.
 
-endmenu
-
 endif
-
diff --git a/arch/arm/mach-sa1100/Makefile.boot b/arch/arm/mach-sa1100/Makefile.boot
deleted file mode 100644
index 9d8246f2cab4..000000000000
--- a/arch/arm/mach-sa1100/Makefile.boot
+++ /dev/null
@@ -1,9 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-ifeq ($(CONFIG_SA1111),y)
-   zreladdr-y	+= 0xc0208000
-else
-   zreladdr-y	+= 0xc0008000
-endif
-params_phys-y	:= 0xc0000100
-initrd_phys-y	:= 0xc0800000
-
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 4dfb7554649d..6c21f214cd60 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -39,9 +39,6 @@
 #include "generic.h"
 #include <clocksource/pxa.h>
 
-unsigned int reset_status;
-EXPORT_SYMBOL(reset_status);
-
 #define NR_FREQS	16
 
 /*
@@ -319,10 +316,13 @@ static struct platform_device *sa11x0_devices[] __initdata = {
 
 static int __init sa1100_init(void)
 {
+	struct resource wdt_res = DEFINE_RES_MEM(0x90000000, 0x20);
 	pm_power_off = sa1100_power_off;
 
 	regulator_has_full_constraints();
 
+	platform_device_register_simple("sa1100_wdt", -1, &wdt_res, 1);
+
 	return platform_add_devices(sa11x0_devices, ARRAY_SIZE(sa11x0_devices));
 }
 
diff --git a/arch/arm/mach-sa1100/include/mach/reset.h b/arch/arm/mach-sa1100/include/mach/reset.h
index 27695650a567..a6723d45ae2a 100644
--- a/arch/arm/mach-sa1100/include/mach/reset.h
+++ b/arch/arm/mach-sa1100/include/mach/reset.h
@@ -10,7 +10,6 @@
 #define RESET_STATUS_GPIO	(1 << 3)	/* GPIO Reset */
 #define RESET_STATUS_ALL	(0xf)
 
-extern unsigned int reset_status;
 static inline void clear_reset_status(unsigned int mask)
 {
 	RCSR = mask;
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 3683d6f10973..37f862f13c8d 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -1,10 +1,9 @@
 # SPDX-License-Identifier: GPL-2.0
 menuconfig ARCH_RENESAS
 	bool "Renesas ARM SoCs"
-	depends on ARCH_MULTI_V7 && MMU
+	depends on ARCH_MULTI_V7
 	select ARM_GIC
 	select GPIOLIB
 	select NO_IOPORT_MAP
 	select PINCTRL
-	select SOC_BUS
 	select ZONE_DMA if ARM_LPAE
diff --git a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
index 09ef73b99dd8..117e7b07995b 100644
--- a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
@@ -67,7 +67,7 @@ static const struct of_device_id rcar_gen2_quirk_match[] = {
 	{ .compatible = "dlg,da9063", .data = &da9063_msg },
 	{ .compatible = "dlg,da9063l", .data = &da9063_msg },
 	{ .compatible = "dlg,da9210", .data = &da9210_msg },
-	{},
+	{ /* sentinel */ }
 };
 
 static int regulator_quirk_notify(struct notifier_block *nb,
@@ -125,6 +125,7 @@ remove:
 
 	list_for_each_entry_safe(pos, tmp, &quirk_list, list) {
 		list_del(&pos->list);
+		of_node_put(pos->np);
 		kfree(pos);
 	}
 
@@ -174,11 +175,12 @@ static int __init rcar_gen2_regulator_quirk(void)
 		memcpy(&quirk->i2c_msg, id->data, sizeof(quirk->i2c_msg));
 
 		quirk->id = id;
-		quirk->np = np;
+		quirk->np = of_node_get(np);
 		quirk->i2c_msg.addr = addr;
 
 		ret = of_irq_parse_one(np, 0, argsa);
 		if (ret) {	/* Skip invalid entry and continue */
+			of_node_put(np);
 			kfree(quirk);
 			continue;
 		}
@@ -225,6 +227,7 @@ err_free:
 err_mem:
 	list_for_each_entry_safe(pos, tmp, &quirk_list, list) {
 		list_del(&pos->list);
+		of_node_put(pos->np);
 		kfree(pos);
 	}
 
diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c
index a328d2f52678..ed82d6429623 100644
--- a/arch/arm/mach-shmobile/setup-emev2.c
+++ b/arch/arm/mach-shmobile/setup-emev2.c
@@ -16,7 +16,7 @@
 
 static const char *const emev2_boards_compat_dt[] __initconst = {
 	"renesas,emev2",
-	NULL,
+	NULL
 };
 
 DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)")
diff --git a/arch/arm/mach-shmobile/setup-r7s72100.c b/arch/arm/mach-shmobile/setup-r7s72100.c
index 14867226f8f4..a70b99495e2e 100644
--- a/arch/arm/mach-shmobile/setup-r7s72100.c
+++ b/arch/arm/mach-shmobile/setup-r7s72100.c
@@ -14,7 +14,7 @@
 
 static const char *const r7s72100_boards_compat_dt[] __initconst = {
 	"renesas,r7s72100",
-	NULL,
+	NULL
 };
 
 DT_MACHINE_START(R7S72100_DT, "Generic R7S72100 (Flattened Device Tree)")
diff --git a/arch/arm/mach-shmobile/setup-r7s9210.c b/arch/arm/mach-shmobile/setup-r7s9210.c
index 573fb9955e7e..90add728bc3d 100644
--- a/arch/arm/mach-shmobile/setup-r7s9210.c
+++ b/arch/arm/mach-shmobile/setup-r7s9210.c
@@ -15,7 +15,7 @@
 
 static const char *const r7s9210_boards_compat_dt[] __initconst = {
 	"renesas,r7s9210",
-	NULL,
+	NULL
 };
 
 DT_MACHINE_START(R7S72100_DT, "Generic R7S9210 (Flattened Device Tree)")
diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c
index 23a29a0ea9c9..9e3f4dc08372 100644
--- a/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ b/arch/arm/mach-shmobile/setup-r8a73a4.c
@@ -14,7 +14,7 @@
 
 static const char *const r8a73a4_boards_compat_dt[] __initconst = {
 	"renesas,r8a73a4",
-	NULL,
+	NULL
 };
 
 DT_MACHINE_START(R8A73A4_DT, "Generic R8A73A4 (Flattened Device Tree)")
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index f760c27c9907..9ac2b8a2aa6a 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -72,7 +72,7 @@ static void __init r8a7740_generic_init(void)
 
 static const char *const r8a7740_boards_compat_dt[] __initconst = {
 	"renesas,r8a7740",
-	NULL,
+	NULL
 };
 
 DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)")
diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c
index 02cda9cada4c..445017e8cfe8 100644
--- a/arch/arm/mach-shmobile/setup-r8a7778.c
+++ b/arch/arm/mach-shmobile/setup-r8a7778.c
@@ -43,7 +43,7 @@ static void __init r8a7778_init_irq_dt(void)
 
 static const char *const r8a7778_compat_dt[] __initconst = {
 	"renesas,r8a7778",
-	NULL,
+	NULL
 };
 
 DT_MACHINE_START(R8A7778_DT, "Generic R8A7778 (Flattened Device Tree)")
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index b6e282116d66..c3af2c8925ba 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -49,7 +49,7 @@ static void __init r8a7779_init_irq_dt(void)
 
 static const char *const r8a7779_compat_dt[] __initconst = {
 	"renesas,r8a7779",
-	NULL,
+	NULL
 };
 
 DT_MACHINE_START(R8A7779_DT, "Generic R8A7779 (Flattened Device Tree)")
diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
index d42d93443f2f..3edbf0719fb3 100644
--- a/arch/arm/mach-shmobile/setup-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -199,7 +199,7 @@ static const char * const rcar_gen2_boards_compat_dt[] __initconst = {
 	"renesas,r8a7792",
 	"renesas,r8a7793",
 	"renesas,r8a7794",
-	NULL,
+	NULL
 };
 
 DT_MACHINE_START(RCAR_GEN2_DT, "Generic R-Car Gen2 (Flattened Device Tree)")
@@ -215,7 +215,7 @@ static const char * const rz_g1_boards_compat_dt[] __initconst = {
 	"renesas,r8a7744",
 	"renesas,r8a7745",
 	"renesas,r8a77470",
-	NULL,
+	NULL
 };
 
 DT_MACHINE_START(RZ_G1_DT, "Generic RZ/G1 (Flattened Device Tree)")
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index 890bf537b7de..7fb27240e907 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -32,7 +32,7 @@ static void __init sh73a0_generic_init(void)
 
 static const char *const sh73a0_boards_compat_dt[] __initconst = {
 	"renesas,sh73a0",
-	NULL,
+	NULL
 };
 
 DT_MACHINE_START(SH73A0_DT, "Generic SH73A0 (Flattened Device Tree)")
diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig
index 43ddec677c0b..eb72c240c248 100644
--- a/arch/arm/mach-socfpga/Kconfig
+++ b/arch/arm/mach-socfpga/Kconfig
@@ -2,7 +2,7 @@
 menuconfig ARCH_INTEL_SOCFPGA
 	bool "Altera SOCFPGA family"
 	depends on ARCH_MULTI_V7
-	select ARCH_SUPPORTS_BIG_ENDIAN
+	select ARCH_HAS_RESET_CONTROLLER
 	select ARM_AMBA
 	select ARM_GIC
 	select CACHE_L2X0
@@ -18,6 +18,7 @@ menuconfig ARCH_INTEL_SOCFPGA
 	select PL310_ERRATA_727915
 	select PL310_ERRATA_753970 if PL310
 	select PL310_ERRATA_769419
+	select RESET_CONTROLLER
 
 if ARCH_INTEL_SOCFPGA
 config SOCFPGA_SUSPEND
diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
index 20e284563a80..1add7ee49b63 100644
--- a/arch/arm/mach-spear/Kconfig
+++ b/arch/arm/mach-spear/Kconfig
@@ -5,7 +5,7 @@
 
 menuconfig PLAT_SPEAR
 	bool "ST SPEAr Family"
-	depends on ARCH_MULTI_V7 || ARCH_MULTI_V5
+	depends on ARCH_MULTI_V7 || (ARCH_MULTI_V5 && CPU_LITTLE_ENDIAN)
 	select ARM_AMBA
 	select CLKSRC_MMIO
 	select GPIOLIB
diff --git a/arch/arm/mach-spear/Makefile b/arch/arm/mach-spear/Makefile
index 176b14f83089..c6101a843601 100644
--- a/arch/arm/mach-spear/Makefile
+++ b/arch/arm/mach-spear/Makefile
@@ -3,8 +3,6 @@
 # SPEAr Platform specific Makefile
 #
 
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
-
 # Common support
 obj-y	:= restart.o time.o
 
diff --git a/arch/arm/mach-spear/generic.h b/arch/arm/mach-spear/generic.h
index 8ec2b92dca19..9e36920d4cfd 100644
--- a/arch/arm/mach-spear/generic.h
+++ b/arch/arm/mach-spear/generic.h
@@ -1,13 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * spear machine family generic header file
  *
  * Copyright (C) 2009-2012 ST Microelectronics
  * Rajeev Kumar <rajeev-dlh.kumar@st.com>
  * Viresh Kumar <vireshk@kernel.org>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #ifndef __MACH_GENERIC_H
@@ -28,11 +25,8 @@ extern struct pl022_ssp_controller pl022_plat_data;
 extern struct pl08x_platform_data pl080_plat_data;
 
 void __init spear_setup_of_timer(void);
-void __init spear3xx_clk_init(void __iomem *misc_base,
-			      void __iomem *soc_config_base);
 void __init spear3xx_map_io(void);
 void __init spear3xx_dt_init_irq(void);
-void __init spear6xx_clk_init(void __iomem *misc_base);
 void __init spear13xx_map_io(void);
 void __init spear13xx_l2x0_init(void);
 
diff --git a/arch/arm/mach-spear/include/mach/irqs.h b/arch/arm/mach-spear/include/mach/irqs.h
deleted file mode 100644
index 7058720c5278..000000000000
--- a/arch/arm/mach-spear/include/mach/irqs.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * IRQ helper macros for spear machine family
- *
- * Copyright (C) 2009-2012 ST Microelectronics
- * Rajeev Kumar <rajeev-dlh.kumar@st.com>
- * Viresh Kumar <vireshk@kernel.org>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_IRQS_H
-#define __MACH_IRQS_H
-
-#ifdef CONFIG_ARCH_SPEAR3XX
-#define NR_IRQS			256
-#endif
-
-#ifdef CONFIG_ARCH_SPEAR6XX
-/* IRQ definitions */
-/* VIC 1 */
-#define IRQ_VIC_END				64
-
-/* GPIO pins virtual irqs */
-#define VIRTUAL_IRQS				24
-#define NR_IRQS					(IRQ_VIC_END + VIRTUAL_IRQS)
-#endif
-
-#ifdef CONFIG_ARCH_SPEAR13XX
-#define IRQ_GIC_END			160
-#define NR_IRQS				IRQ_GIC_END
-#endif
-
-#endif /* __MACH_IRQS_H */
diff --git a/arch/arm/mach-spear/include/mach/uncompress.h b/arch/arm/mach-spear/include/mach/uncompress.h
deleted file mode 100644
index 8439b9c12edb..000000000000
--- a/arch/arm/mach-spear/include/mach/uncompress.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/uncompress.h
- *
- * Serial port stubs for kernel decompress status messages
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar <vireshk@kernel.org>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/io.h>
-#include <linux/amba/serial.h>
-#include <mach/spear.h>
-
-#ifndef __PLAT_UNCOMPRESS_H
-#define __PLAT_UNCOMPRESS_H
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
-	void __iomem *base = (void __iomem *)SPEAR_DBG_UART_BASE;
-
-	while (readl_relaxed(base + UART01x_FR) & UART01x_FR_TXFF)
-		barrier();
-
-	writel_relaxed(c, base + UART01x_DR);
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-
-#endif /* __PLAT_UNCOMPRESS_H */
diff --git a/arch/arm/mach-spear/include/mach/misc_regs.h b/arch/arm/mach-spear/misc_regs.h
index cfaf7c665b58..72aa801a3a89 100644
--- a/arch/arm/mach-spear/include/mach/misc_regs.h
+++ b/arch/arm/mach-spear/misc_regs.h
@@ -1,20 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * arch/arm/mach-spear3xx/include/mach/misc_regs.h
- *
  * Miscellaneous registers definitions for SPEAr3xx machine family
  *
  * Copyright (C) 2009 ST Microelectronics
  * Viresh Kumar <vireshk@kernel.org>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #ifndef __MACH_MISC_REGS_H
 #define __MACH_MISC_REGS_H
 
-#include <mach/spear.h>
+#include "spear.h"
 
 #define MISC_BASE		(VA_SPEAR_ICM3_MISC_REG_BASE)
 #define DMA_CHN_CFG		(MISC_BASE + 0x0A0)
diff --git a/arch/arm/mach-spear/pl080.c b/arch/arm/mach-spear/pl080.c
index b4529f3e0ee9..d6b8627d2544 100644
--- a/arch/arm/mach-spear/pl080.c
+++ b/arch/arm/mach-spear/pl080.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/plat-spear/pl080.c
  *
@@ -5,10 +6,6 @@
  *
  * Copyright (C) 2012 ST Microelectronics
  * Viresh Kumar <vireshk@kernel.org>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/amba/pl08x.h>
@@ -17,8 +14,8 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/spinlock_types.h>
-#include <mach/spear.h>
-#include <mach/misc_regs.h>
+#include "spear.h"
+#include "misc_regs.h"
 
 static spinlock_t lock = __SPIN_LOCK_UNLOCKED(x);
 
diff --git a/arch/arm/mach-spear/pl080.h b/arch/arm/mach-spear/pl080.h
index 608dec6725ae..3732d940dbfb 100644
--- a/arch/arm/mach-spear/pl080.h
+++ b/arch/arm/mach-spear/pl080.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * arch/arm/plat-spear/include/plat/pl080.h
  *
@@ -5,10 +6,6 @@
  *
  * Copyright (C) 2012 ST Microelectronics
  * Viresh Kumar <vireshk@kernel.org>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #ifndef __PLAT_PL080_H
diff --git a/arch/arm/mach-spear/platsmp.c b/arch/arm/mach-spear/platsmp.c
index e33a85c28c95..97fbda998df9 100644
--- a/arch/arm/mach-spear/platsmp.c
+++ b/arch/arm/mach-spear/platsmp.c
@@ -14,7 +14,7 @@
 #include <linux/smp.h>
 #include <asm/cacheflush.h>
 #include <asm/smp_scu.h>
-#include <mach/spear.h>
+#include "spear.h"
 #include "generic.h"
 
 /* XXX spear_pen_release is cargo culted code - DO NOT COPY XXX */
diff --git a/arch/arm/mach-spear/restart.c b/arch/arm/mach-spear/restart.c
index b4342155a783..76fb16cc8132 100644
--- a/arch/arm/mach-spear/restart.c
+++ b/arch/arm/mach-spear/restart.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/plat-spear/restart.c
  *
@@ -5,16 +6,12 @@
  *
  * Copyright (C) 2009 ST Microelectronics
  * Viresh Kumar <vireshk@kernel.org>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 #include <linux/io.h>
 #include <linux/amba/sp810.h>
 #include <linux/reboot.h>
 #include <asm/system_misc.h>
-#include <mach/spear.h>
+#include "spear.h"
 #include "generic.h"
 
 #define SPEAR13XX_SYS_SW_RES			(VA_MISC_BASE + 0x204)
diff --git a/arch/arm/mach-spear/include/mach/spear.h b/arch/arm/mach-spear/spear.h
index 5ed841ccf8a3..432efd407c76 100644
--- a/arch/arm/mach-spear/include/mach/spear.h
+++ b/arch/arm/mach-spear/spear.h
@@ -1,13 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * SPEAr3xx/6xx Machine family specific definition
  *
  * Copyright (C) 2009,2012 ST Microelectronics
  * Rajeev Kumar<rajeev-dlh.kumar@st.com>
  * Viresh Kumar <vireshk@kernel.org>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #ifndef __MACH_SPEAR_H
diff --git a/arch/arm/mach-spear/spear1310.c b/arch/arm/mach-spear/spear1310.c
index a7d4f136836f..89d388388e02 100644
--- a/arch/arm/mach-spear/spear1310.c
+++ b/arch/arm/mach-spear/spear1310.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-spear13xx/spear1310.c
  *
@@ -5,10 +6,6 @@
  *
  * Copyright (C) 2012 ST Microelectronics
  * Viresh Kumar <vireshk@kernel.org>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #define pr_fmt(fmt) "SPEAr1310: " fmt
@@ -18,7 +15,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include "generic.h"
-#include <mach/spear.h>
+#include "spear.h"
 
 /* Base addresses */
 #define SPEAR1310_RAS_GRP1_BASE			UL(0xD8000000)
diff --git a/arch/arm/mach-spear/spear1340.c b/arch/arm/mach-spear/spear1340.c
index a212af90c0bc..a391f154eff9 100644
--- a/arch/arm/mach-spear/spear1340.c
+++ b/arch/arm/mach-spear/spear1340.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-spear13xx/spear1340.c
  *
@@ -5,10 +6,6 @@
  *
  * Copyright (C) 2012 ST Microelectronics
  * Viresh Kumar <vireshk@kernel.org>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #define pr_fmt(fmt) "SPEAr1340: " fmt
diff --git a/arch/arm/mach-spear/spear13xx.c b/arch/arm/mach-spear/spear13xx.c
index 74d1ca2a529a..ac5b76bbeab5 100644
--- a/arch/arm/mach-spear/spear13xx.c
+++ b/arch/arm/mach-spear/spear13xx.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-spear13xx/spear13xx.c
  *
@@ -5,10 +6,6 @@
  *
  * Copyright (C) 2012 ST Microelectronics
  * Viresh Kumar <vireshk@kernel.org>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #define pr_fmt(fmt) "SPEAr13xx: " fmt
@@ -21,7 +18,7 @@
 #include <linux/of.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/map.h>
-#include <mach/spear.h>
+#include "spear.h"
 #include "generic.h"
 
 void __init spear13xx_l2x0_init(void)
@@ -29,7 +26,7 @@ void __init spear13xx_l2x0_init(void)
 	/*
 	 * 512KB (64KB/way), 8-way associativity, parity supported
 	 *
-	 * FIXME: 9th bit, of Auxillary Controller register must be set
+	 * FIXME: 9th bit, of Auxiliary Controller register must be set
 	 * for some spear13xx devices for stable L2 operation.
 	 *
 	 * Enable Early BRESP, L2 prefetch for Instruction and Data,
diff --git a/arch/arm/mach-spear/spear300.c b/arch/arm/mach-spear/spear300.c
index 325b89579be1..1d6b6e10fcf6 100644
--- a/arch/arm/mach-spear/spear300.c
+++ b/arch/arm/mach-spear/spear300.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-spear3xx/spear300.c
  *
@@ -5,10 +6,6 @@
  *
  * Copyright (C) 2009-2012 ST Microelectronics
  * Viresh Kumar <vireshk@kernel.org>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #define pr_fmt(fmt) "SPEAr300: " fmt
@@ -17,7 +14,7 @@
 #include <linux/of_platform.h>
 #include <asm/mach/arch.h>
 #include "generic.h"
-#include <mach/spear.h>
+#include "spear.h"
 
 /* DMAC platform data's slave info */
 struct pl08x_channel_data spear300_dma_info[] = {
diff --git a/arch/arm/mach-spear/spear310.c b/arch/arm/mach-spear/spear310.c
index 59e173dc85cf..da4643b9f3bb 100644
--- a/arch/arm/mach-spear/spear310.c
+++ b/arch/arm/mach-spear/spear310.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-spear3xx/spear310.c
  *
@@ -5,10 +6,6 @@
  *
  * Copyright (C) 2009-2012 ST Microelectronics
  * Viresh Kumar <vireshk@kernel.org>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #define pr_fmt(fmt) "SPEAr310: " fmt
@@ -18,7 +15,7 @@
 #include <linux/of_platform.h>
 #include <asm/mach/arch.h>
 #include "generic.h"
-#include <mach/spear.h>
+#include "spear.h"
 
 #define SPEAR310_UART1_BASE		UL(0xB2000000)
 #define SPEAR310_UART2_BASE		UL(0xB2080000)
diff --git a/arch/arm/mach-spear/spear320.c b/arch/arm/mach-spear/spear320.c
index 926d5a243238..12aa82b987ac 100644
--- a/arch/arm/mach-spear/spear320.c
+++ b/arch/arm/mach-spear/spear320.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-spear3xx/spear320.c
  *
@@ -5,10 +6,6 @@
  *
  * Copyright (C) 2009-2012 ST Microelectronics
  * Viresh Kumar <vireshk@kernel.org>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #define pr_fmt(fmt) "SPEAr320: " fmt
@@ -20,7 +17,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include "generic.h"
-#include <mach/spear.h>
+#include "spear.h"
 
 #define SPEAR320_UART1_BASE		UL(0xA3000000)
 #define SPEAR320_UART2_BASE		UL(0xA4000000)
diff --git a/arch/arm/mach-spear/spear3xx.c b/arch/arm/mach-spear/spear3xx.c
index f83321d5e353..7ef9670d3029 100644
--- a/arch/arm/mach-spear/spear3xx.c
+++ b/arch/arm/mach-spear/spear3xx.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-spear3xx/spear3xx.c
  *
@@ -5,10 +6,6 @@
  *
  * Copyright (C) 2009-2012 ST Microelectronics
  * Viresh Kumar <vireshk@kernel.org>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #define pr_fmt(fmt) "SPEAr3xx: " fmt
@@ -16,12 +13,13 @@
 #include <linux/amba/pl022.h>
 #include <linux/amba/pl080.h>
 #include <linux/clk.h>
+#include <linux/clk/spear.h>
 #include <linux/io.h>
 #include <asm/mach/map.h>
 #include "pl080.h"
 #include "generic.h"
-#include <mach/spear.h>
-#include <mach/misc_regs.h>
+#include "spear.h"
+#include "misc_regs.h"
 
 /* ssp device registration */
 struct pl022_ssp_controller pl022_plat_data = {
diff --git a/arch/arm/mach-spear/spear6xx.c b/arch/arm/mach-spear/spear6xx.c
index c5fc110134ba..f0a1e704cceb 100644
--- a/arch/arm/mach-spear/spear6xx.c
+++ b/arch/arm/mach-spear/spear6xx.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-spear6xx/spear6xx.c
  *
@@ -7,14 +8,11 @@
  * Rajeev Kumar<rajeev-dlh.kumar@st.com>
  *
  * Copyright 2012 Stefan Roese <sr@denx.de>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/amba/pl08x.h>
 #include <linux/clk.h>
+#include <linux/clk/spear.h>
 #include <linux/err.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
@@ -25,8 +23,8 @@
 #include <asm/mach/map.h>
 #include "pl080.h"
 #include "generic.h"
-#include <mach/spear.h>
-#include <mach/misc_regs.h>
+#include "spear.h"
+#include "misc_regs.h"
 
 /* dmac device registration */
 static struct pl08x_channel_data spear600_dma_info[] = {
@@ -342,7 +340,7 @@ static struct pl08x_platform_data spear6xx_pl080_plat_data = {
  * 0xD0000000		0xFD000000
  * 0xFC000000		0xFC000000
  */
-struct map_desc spear6xx_io_desc[] __initdata = {
+static struct map_desc spear6xx_io_desc[] __initdata = {
 	{
 		.virtual	= (unsigned long)VA_SPEAR6XX_ML_CPU_BASE,
 		.pfn		= __phys_to_pfn(SPEAR_ICM3_ML1_2_BASE),
@@ -362,12 +360,12 @@ struct map_desc spear6xx_io_desc[] __initdata = {
 };
 
 /* This will create static memory mapping for selected devices */
-void __init spear6xx_map_io(void)
+static void __init spear6xx_map_io(void)
 {
 	iotable_init(spear6xx_io_desc, ARRAY_SIZE(spear6xx_io_desc));
 }
 
-void __init spear6xx_timer_init(void)
+static void __init spear6xx_timer_init(void)
 {
 	char pclk_name[] = "pll3_clk";
 	struct clk *gpt_clk, *pclk;
@@ -397,7 +395,7 @@ void __init spear6xx_timer_init(void)
 }
 
 /* Add auxdata to pass platform data */
-struct of_dev_auxdata spear6xx_auxdata_lookup[] __initdata = {
+static struct of_dev_auxdata spear6xx_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("arm,pl080", SPEAR_ICM3_DMA_BASE, NULL,
 			&spear6xx_pl080_plat_data),
 	{}
diff --git a/arch/arm/mach-spear/time.c b/arch/arm/mach-spear/time.c
index d1fdb6066f7b..e979e2197f8e 100644
--- a/arch/arm/mach-spear/time.c
+++ b/arch/arm/mach-spear/time.c
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/plat-spear/time.c
  *
  * Copyright (C) 2010 ST Microelectronics
  * Shiraz Hashim<shiraz.linux.kernel@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/clk.h>
@@ -218,13 +215,13 @@ void __init spear_setup_of_timer(void)
 	irq = irq_of_parse_and_map(np, 0);
 	if (!irq) {
 		pr_err("%s: No irq passed for timer via DT\n", __func__);
-		return;
+		goto err_put_np;
 	}
 
 	gpt_base = of_iomap(np, 0);
 	if (!gpt_base) {
 		pr_err("%s: of iomap failed\n", __func__);
-		return;
+		goto err_put_np;
 	}
 
 	gpt_clk = clk_get_sys("gpt0", NULL);
@@ -239,6 +236,8 @@ void __init spear_setup_of_timer(void)
 		goto err_prepare_enable_clk;
 	}
 
+	of_node_put(np);
+
 	spear_clockevent_init(irq);
 	spear_clocksource_init();
 
@@ -248,4 +247,6 @@ err_prepare_enable_clk:
 	clk_put(gpt_clk);
 err_iomap:
 	iounmap(gpt_base);
+err_put_np:
+	of_node_put(np);
 }
diff --git a/arch/arm/mach-stm32/Makefile.boot b/arch/arm/mach-stm32/Makefile.boot
deleted file mode 100644
index 5dde7328a7a9..000000000000
--- a/arch/arm/mach-stm32/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-# Empty file waiting for deletion once Makefile.boot isn't needed any more.
-# Patch waits for application at
-# https://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=7889/1 .
diff --git a/arch/arm/mach-sunplus/Kconfig b/arch/arm/mach-sunplus/Kconfig
new file mode 100644
index 000000000000..d0c2416e6f24
--- /dev/null
+++ b/arch/arm/mach-sunplus/Kconfig
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+menuconfig ARCH_SUNPLUS
+	bool "Sunplus SoCs"
+	depends on ARCH_MULTI_V7
+	help
+	  Support for Sunplus SoC family: SP7021 and succeeding SoC-based systems,
+	  such as the Banana Pi BPI-F2S development board (and derivatives).
+	  (<http://www.sinovoip.com.cn/ecp_view.asp?id=586>)
+	  (<https://tibbo.com/store/plus1.html>)
+
+config SOC_SP7021
+	bool "Sunplus SP7021 SoC support"
+	depends on ARCH_SUNPLUS
+	default ARCH_SUNPLUS
+	select HAVE_ARM_ARCH_TIMER
+	select ARM_GIC
+	select ARM_PSCI
+	select PINCTRL
+	select PINCTRL_SPPCTL
+	select SERIAL_SUNPLUS if TTY
+	select SERIAL_SUNPLUS_CONSOLE if TTY
+	help
+	  Support for Sunplus SP7021 SoC. It is based on ARM 4-core
+	  Cortex-A7 with various peripherals (e.g.: I2C, SPI, SDIO,
+	  Ethernet, etc.), FPGA interface,  chip-to-chip bus.
+	  It is designed for industrial control.
diff --git a/arch/arm/mach-sunplus/Makefile b/arch/arm/mach-sunplus/Makefile
new file mode 100644
index 000000000000..d211de6af2db
--- /dev/null
+++ b/arch/arm/mach-sunplus/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+
+obj-$(CONFIG_SOC_SP7021)	+= sp7021.o
diff --git a/arch/arm/mach-sunplus/sp7021.c b/arch/arm/mach-sunplus/sp7021.c
new file mode 100644
index 000000000000..774d0a5bd4eb
--- /dev/null
+++ b/arch/arm/mach-sunplus/sp7021.c
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright (C) Sunplus Technology Co., Ltd.
+ *       All rights reserved.
+ */
+#include <linux/kernel.h>
+#include <asm/mach/arch.h>
+
+static const char *sp7021_compat[] __initconst = {
+	"sunplus,sp7021",
+	NULL
+};
+
+DT_MACHINE_START(SP7021_DT, "SP7021")
+	.dt_compat	= sp7021_compat,
+MACHINE_END
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index e5c2fce281cd..e015f2497111 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -1,13 +1,10 @@
 # SPDX-License-Identifier: GPL-2.0-only
 menuconfig ARCH_SUNXI
 	bool "Allwinner SoCs"
-	depends on ARCH_MULTI_V5 || ARCH_MULTI_V7
+	depends on (CPU_LITTLE_ENDIAN && ARCH_MULTI_V5) || ARCH_MULTI_V7
 	select ARCH_HAS_RESET_CONTROLLER
 	select CLKSRC_MMIO
-	select GENERIC_IRQ_CHIP
 	select GPIOLIB
-	select IRQ_DOMAIN_HIERARCHY
-	select IRQ_FASTEOI_HIERARCHY_HANDLERS
 	select PINCTRL
 	select PM_OPP
 	select SUN4I_TIMER
@@ -22,10 +19,12 @@ if ARCH_MULTI_V7
 config MACH_SUN4I
 	bool "Allwinner A10 (sun4i) SoCs support"
 	default ARCH_SUNXI
+	select SUN4I_INTC
 
 config MACH_SUN5I
 	bool "Allwinner A10s / A13 (sun5i) SoCs support"
 	default ARCH_SUNXI
+	select SUN4I_INTC
 	select SUN5I_HSTIMER
 
 config MACH_SUN6I
@@ -34,26 +33,31 @@ config MACH_SUN6I
 	select ARM_GIC
 	select MFD_SUN6I_PRCM
 	select SUN5I_HSTIMER
+	select SUN6I_R_INTC
+	select SUNXI_NMI_INTC
 
 config MACH_SUN7I
 	bool "Allwinner A20 (sun7i) SoCs support"
 	default ARCH_SUNXI
 	select ARM_GIC
 	select ARM_PSCI
-	select ARCH_SUPPORTS_BIG_ENDIAN
 	select HAVE_ARM_ARCH_TIMER
 	select SUN5I_HSTIMER
+	select SUNXI_NMI_INTC
 
 config MACH_SUN8I
 	bool "Allwinner sun8i Family SoCs support"
 	default ARCH_SUNXI
 	select ARM_GIC
 	select MFD_SUN6I_PRCM
+	select SUN6I_R_INTC
+	select SUNXI_NMI_INTC
 
 config MACH_SUN9I
 	bool "Allwinner (sun9i) SoCs support"
 	default ARCH_SUNXI
 	select ARM_GIC
+	select SUNXI_NMI_INTC
 
 config ARCH_SUNXI_MC_SMP
 	bool
@@ -69,6 +73,7 @@ if ARCH_MULTI_V5
 config MACH_SUNIV
 	bool "Allwinner ARMv5 F-series (suniv) SoCs support"
 	default ARCH_SUNXI
+	select SUN4I_INTC
 	help
 	  Support for Allwinner suniv ARMv5 SoCs.
 	  (F1C100A, F1C100s, F1C200s, F1C500, F1C600)
diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
index e6911a14c096..1f57e7c0feae 100644
--- a/arch/arm/mach-tegra/platsmp.c
+++ b/arch/arm/mach-tegra/platsmp.c
@@ -83,7 +83,7 @@ static int tegra30_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 * For warm boot CPU that was resumed from CPU hotplug, the
 	 * power will be resumed automatically after un-halting the
 	 * flow controller of the warm boot CPU. We need to wait for
-	 * the confirmaiton that the CPU is powered then removing
+	 * the confirmation that the CPU is powered then removing
 	 * the IO clamps.
 	 * For cold boot CPU, do not wait. After the cold boot CPU be
 	 * booted, it will run to tegra_secondary_init() and set
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 24ed7f4a87a4..c18def269137 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 menuconfig ARCH_U8500
 	bool "ST-Ericsson U8500 Series"
-	depends on ARCH_MULTI_V7 && MMU
+	depends on ARCH_MULTI_V7
 	select AB8500_CORE
 	select ABX500_CORE
 	select ARM_AMBA
diff --git a/arch/arm/mach-versatile/Kconfig b/arch/arm/mach-versatile/Kconfig
index f78a1d358031..b1519b4dc03a 100644
--- a/arch/arm/mach-versatile/Kconfig
+++ b/arch/arm/mach-versatile/Kconfig
@@ -2,6 +2,7 @@
 config ARCH_VERSATILE
 	bool "ARM Ltd. Versatile family"
 	depends on ARCH_MULTI_V5
+	depends on CPU_LITTLE_ENDIAN
 	select ARM_AMBA
 	select ARM_TIMER_SP804
 	select ARM_VIC
@@ -16,3 +17,310 @@ config ARCH_VERSATILE
 	help
 	  This enables support for ARM Ltd Versatile board.
 
+menuconfig ARCH_INTEGRATOR
+	bool "ARM Ltd. Integrator family"
+	depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V6
+	depends on CPU_LITTLE_ENDIAN || ARCH_MULTI_V6
+	select ARM_AMBA
+	select CMA
+	select DMA_CMA
+	select HAVE_TCM
+	select CLK_ICST
+	select MFD_SYSCON
+	select PLAT_VERSATILE
+	select POWER_RESET
+	select POWER_RESET_VERSATILE
+	select POWER_SUPPLY
+	select SOC_INTEGRATOR_CM
+	select VERSATILE_FPGA_IRQ
+	help
+	  Support for ARM's Integrator platform.
+
+if ARCH_INTEGRATOR
+
+config ARCH_INTEGRATOR_AP
+	bool "Support Integrator/AP and Integrator/PP2 platforms"
+	select INTEGRATOR_AP_TIMER
+	select SERIAL_AMBA_PL010 if TTY
+	select SERIAL_AMBA_PL010_CONSOLE if TTY
+	select SOC_BUS
+	help
+	  Include support for the ARM(R) Integrator/AP and
+	  Integrator/PP2 platforms.
+
+config INTEGRATOR_IMPD1
+	bool "Include support for Integrator/IM-PD1"
+	depends on ARCH_INTEGRATOR_AP
+	select ARM_VIC
+	select GPIO_PL061
+	select GPIOLIB
+	select REGULATOR
+	select REGULATOR_FIXED_VOLTAGE
+	help
+	  The IM-PD1 is an add-on logic module for the Integrator which
+	  allows ARM(R) Ltd PrimeCells to be developed and evaluated.
+	  The IM-PD1 can be found on the Integrator/PP2 platform.
+
+config INTEGRATOR_CM720T
+	bool "Integrator/CM720T core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V4T
+	select CPU_ARM720T
+
+config INTEGRATOR_CM920T
+	bool "Integrator/CM920T core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V4T
+	select CPU_ARM920T
+
+config INTEGRATOR_CM922T_XA10
+	bool "Integrator/CM922T-XA10 core module"
+	depends on ARCH_MULTI_V4T
+	depends on ARCH_INTEGRATOR_AP
+	select CPU_ARM922T
+
+config INTEGRATOR_CM926EJS
+	bool "Integrator/CM926EJ-S core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V5
+	select CPU_ARM926T
+
+config INTEGRATOR_CM10200E_REV0
+	bool "Integrator/CM10200E rev.0 core module"
+	depends on ARCH_INTEGRATOR_AP && n
+	depends on ARCH_MULTI_V5
+	select CPU_ARM1020
+
+config INTEGRATOR_CM10200E
+	bool "Integrator/CM10200E core module"
+	depends on ARCH_INTEGRATOR_AP && n
+	depends on ARCH_MULTI_V5
+	select CPU_ARM1020E
+
+config INTEGRATOR_CM10220E
+	bool "Integrator/CM10220E core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V5
+	select CPU_ARM1022
+
+config INTEGRATOR_CM1026EJS
+	bool "Integrator/CM1026EJ-S core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V5
+	select CPU_ARM1026
+
+config INTEGRATOR_CM1136JFS
+	bool "Integrator/CM1136JF-S core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V6
+	select CPU_V6
+
+config ARCH_INTEGRATOR_CP
+	bool "Support Integrator/CP platform"
+	depends on ARCH_MULTI_V5 || ARCH_MULTI_V6
+	select ARM_TIMER_SP804
+	select SERIAL_AMBA_PL011 if TTY
+	select SERIAL_AMBA_PL011_CONSOLE if TTY
+	select SOC_BUS
+	help
+	  Include support for the ARM(R) Integrator CP platform.
+
+config INTEGRATOR_CT926
+	bool "Integrator/CT926 (ARM926EJ-S) core tile"
+	depends on ARCH_INTEGRATOR_CP
+	depends on ARCH_MULTI_V5
+	select CPU_ARM926T
+
+config INTEGRATOR_CTB36
+	bool "Integrator/CTB36 (ARM1136JF-S) core tile"
+	depends on ARCH_INTEGRATOR_CP
+	depends on ARCH_MULTI_V6
+	select CPU_V6
+
+config ARCH_CINTEGRATOR
+	depends on ARCH_INTEGRATOR_CP
+	def_bool y
+
+endif
+
+menuconfig ARCH_REALVIEW
+	bool "ARM Ltd. RealView family"
+	depends on (CPU_LITTLE_ENDIAN && ARCH_MULTI_V5) || ARCH_MULTI_V6 || ARCH_MULTI_V7
+	select ARM_AMBA
+	select ARM_GIC
+	select ARM_TIMER_SP804
+	select CLK_SP810
+	select GPIO_PL061 if GPIOLIB
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if SMP
+	select HAVE_PATA_PLATFORM
+	select HAVE_TCM
+	select CLK_ICST
+	select MACH_REALVIEW_EB if ARCH_MULTI_V5
+	select MFD_SYSCON
+	select PLAT_VERSATILE
+	select POWER_RESET
+	select POWER_RESET_VERSATILE
+	select POWER_SUPPLY
+	select SOC_REALVIEW
+	help
+	  This enables support for ARM Ltd RealView boards.
+
+if ARCH_REALVIEW
+
+config MACH_REALVIEW_EB
+	bool "Support RealView(R) Emulation Baseboard"
+	select ARM_GIC
+	select CPU_ARM926T if ARCH_MULTI_V5
+	help
+	  Include support for the ARM(R) RealView(R) Emulation Baseboard
+	  platform. On an ARMv5 kernel, this will include support for
+	  the ARM926EJ-S core tile, while on an ARMv6/v7 kernel, at least
+	  one of the ARM1136, ARM1176, ARM11MPCore or Cortex-A9MPCore
+	  core tile options should be enabled.
+
+config REALVIEW_EB_ARM1136
+	bool "Support ARM1136J(F)-S Tile"
+	depends on MACH_REALVIEW_EB && ARCH_MULTI_V6
+	select CPU_V6
+	help
+	  Enable support for the ARM1136 tile fitted to the
+	  Realview(R) Emulation Baseboard platform.
+
+config REALVIEW_EB_ARM1176
+	bool "Support ARM1176JZ(F)-S Tile"
+	depends on MACH_REALVIEW_EB && ARCH_MULTI_V6
+	help
+	  Enable support for the ARM1176 tile fitted to the
+	  Realview(R) Emulation Baseboard platform.
+
+config REALVIEW_EB_A9MP
+	bool "Support Multicore Cortex-A9 Tile"
+	depends on MACH_REALVIEW_EB && ARCH_MULTI_V7
+	help
+	  Enable support for the Cortex-A9MPCore tile fitted to the
+	  Realview(R) Emulation Baseboard platform.
+
+config REALVIEW_EB_ARM11MP
+	bool "Support ARM11MPCore Tile"
+	depends on MACH_REALVIEW_EB && ARCH_MULTI_V6
+	select HAVE_SMP
+	help
+	  Enable support for the ARM11MPCore tile fitted to the Realview(R)
+	  Emulation Baseboard platform.
+
+config MACH_REALVIEW_PB11MP
+	bool "Support RealView(R) Platform Baseboard for ARM11MPCore"
+	depends on ARCH_MULTI_V6
+	select HAVE_SMP
+	help
+	  Include support for the ARM(R) RealView(R) Platform Baseboard for
+	  the ARM11MPCore.  This platform has an on-board ARM11MPCore and has
+	  support for PCI-E and Compact Flash.
+
+# ARMv6 CPU without K extensions, but does have the new exclusive ops
+config MACH_REALVIEW_PB1176
+	bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S"
+	depends on ARCH_MULTI_V6
+	select CPU_V6
+	select HAVE_TCM
+	help
+	  Include support for the ARM(R) RealView(R) Platform Baseboard for
+	  ARM1176JZF-S.
+
+config MACH_REALVIEW_PBA8
+	bool "Support RealView(R) Platform Baseboard for Cortex(tm)-A8 platform"
+	depends on ARCH_MULTI_V7
+	help
+	  Include support for the ARM(R) RealView Platform Baseboard for
+	  Cortex(tm)-A8.  This platform has an on-board Cortex-A8 and has
+	  support for PCI-E and Compact Flash.
+
+config MACH_REALVIEW_PBX
+	bool "Support RealView(R) Platform Baseboard Explore for Cortex-A9"
+	depends on ARCH_MULTI_V7
+	select ZONE_DMA
+	help
+	  Include support for the ARM(R) RealView(R) Platform Baseboard
+	  Explore.
+
+endif
+
+menuconfig ARCH_VEXPRESS
+	bool "ARM Ltd. Versatile Express family"
+	depends on ARCH_MULTI_V7
+	select ARM_AMBA
+	select ARM_GIC
+	select ARM_GLOBAL_TIMER
+	select ARM_TIMER_SP804
+	select GPIOLIB
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if SMP
+	select CLK_ICST
+	select NO_IOPORT_MAP
+	select PLAT_VERSATILE
+	select POWER_RESET
+	select POWER_RESET_VEXPRESS
+	select POWER_SUPPLY
+	select REGULATOR if MMC_ARMMMCI
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	select VEXPRESS_CONFIG
+	help
+	  This option enables support for systems using Cortex processor based
+	  ARM core and logic (FPGA) tiles on the Versatile Express motherboard,
+	  for example:
+
+	  - CoreTile Express A5x2 (V2P-CA5s)
+	  - CoreTile Express A9x4 (V2P-CA9)
+	  - CoreTile Express A15x2 (V2P-CA15)
+	  - LogicTile Express 13MG (V2F-2XV6) with A5, A7, A9 or A15 SMMs
+	    (Soft Macrocell Models)
+	  - Versatile Express RTSMs (Models)
+
+	  You must boot using a Flattened Device Tree in order to use these
+	  platforms. The traditional (ATAGs) boot method is not usable on
+	  these boards with this option.
+
+if ARCH_VEXPRESS
+
+config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA
+	bool "Enable A5 and A9 only errata work-arounds"
+	default y
+	select ARM_ERRATA_643719 if SMP
+	select ARM_ERRATA_720789
+	select PL310_ERRATA_753970 if CACHE_L2X0
+	help
+	  Provides common dependencies for Versatile Express platforms
+	  based on Cortex-A5 and Cortex-A9 processors. In order to
+	  build a working kernel, you must also enable relevant core
+	  tile support or Flattened Device Tree based support options.
+
+config ARCH_VEXPRESS_DCSCB
+	bool "Dual Cluster System Control Block (DCSCB) support"
+	depends on MCPM
+	select ARM_CCI400_PORT_CTRL
+	help
+	  Support for the Dual Cluster System Configuration Block (DCSCB).
+	  This is needed to provide CPU and cluster power management
+	  on RTSM implementing big.LITTLE.
+
+config ARCH_VEXPRESS_SPC
+	bool "Versatile Express Serial Power Controller (SPC)"
+	select PM_OPP
+	help
+	  The TC2 (A15x2 A7x3) versatile express core tile integrates a logic
+	  block called Serial Power Controller (SPC) that provides the interface
+	  between the dual cluster test-chip and the M3 microcontroller that
+	  carries out power management.
+
+config ARCH_VEXPRESS_TC2_PM
+	bool "Versatile Express TC2 power management"
+	depends on MCPM
+	select ARM_CCI400_PORT_CTRL
+	select ARCH_VEXPRESS_SPC
+	select ARM_CPU_SUSPEND
+	help
+	  Support for CPU and cluster power management on Versatile Express
+	  with a TC2 (A15x2 A7x3) big.LITTLE core tile.
+
+endif
diff --git a/arch/arm/mach-versatile/Makefile b/arch/arm/mach-versatile/Makefile
index 2b907718d467..27d712bcf1af 100644
--- a/arch/arm/mach-versatile/Makefile
+++ b/arch/arm/mach-versatile/Makefile
@@ -3,4 +3,34 @@
 # Makefile for the linux kernel.
 #
 
-obj-y					:= versatile_dt.o
+# versatile
+obj-$(CONFIG_ARCH_VERSATILE)		+= versatile.o
+
+# integrator
+obj-$(CONFIG_ARCH_INTEGRATOR)		+= integrator.o
+obj-$(CONFIG_ARCH_INTEGRATOR_AP)	+= integrator_ap.o
+obj-$(CONFIG_ARCH_INTEGRATOR_CP)	+= integrator_cp.o
+
+# realview
+obj-$(CONFIG_ARCH_REALVIEW)		+= realview.o
+
+# vexpress
+obj-$(CONFIG_ARCH_VEXPRESS)		:= v2m.o
+obj-$(CONFIG_ARCH_VEXPRESS_DCSCB)	+= dcscb.o	dcscb_setup.o
+CFLAGS_dcscb.o				+= -march=armv7-a
+CFLAGS_REMOVE_dcscb.o			= -pg
+obj-$(CONFIG_ARCH_VEXPRESS_SPC)		+= spc.o
+CFLAGS_REMOVE_spc.o			= -pg
+obj-$(CONFIG_ARCH_VEXPRESS_TC2_PM)	+= tc2_pm.o
+CFLAGS_tc2_pm.o				+= -march=armv7-a
+CFLAGS_REMOVE_tc2_pm.o			= -pg
+
+# mps2
+obj-$(CONFIG_ARCH_MPS2)			+= v2m-mps2.o
+
+ifdef CONFIG_SMP
+obj-y					+= headsmp.o platsmp.o
+obj-$(CONFIG_ARCH_REALVIEW)		+= platsmp-realview.o
+obj-$(CONFIG_ARCH_VEXPRESS)		+= platsmp-vexpress.o
+obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
+endif
diff --git a/arch/arm/mach-vexpress/dcscb.c b/arch/arm/mach-versatile/dcscb.c
index a0554d7d04f7..d8797350996d 100644
--- a/arch/arm/mach-vexpress/dcscb.c
+++ b/arch/arm/mach-versatile/dcscb.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * arch/arm/mach-vexpress/dcscb.c - Dual Cluster System Configuration Block
+ * dcscb.c - Dual Cluster System Configuration Block
  *
  * Created by:	Nicolas Pitre, May 2012
  * Copyright:	(C) 2012-2013  Linaro Limited
@@ -20,7 +20,7 @@
 #include <asm/cputype.h>
 #include <asm/cp15.h>
 
-#include "core.h"
+#include "vexpress.h"
 
 #define RST_HOLD0	0x0
 #define RST_HOLD1	0x4
@@ -144,6 +144,7 @@ static int __init dcscb_init(void)
 	if (!node)
 		return -ENODEV;
 	dcscb_base = of_iomap(node, 0);
+	of_node_put(node);
 	if (!dcscb_base)
 		return -EADDRNOTAVAIL;
 	cfg = readl_relaxed(dcscb_base + DCS_CFG_R);
diff --git a/arch/arm/mach-vexpress/dcscb_setup.S b/arch/arm/mach-versatile/dcscb_setup.S
index 0614b2ebd354..92d1fd9d7f6a 100644
--- a/arch/arm/mach-vexpress/dcscb_setup.S
+++ b/arch/arm/mach-versatile/dcscb_setup.S
@@ -1,7 +1,5 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * arch/arm/include/asm/dcscb_setup.S
- *
  * Created by:  Dave Martin, 2012-06-22
  * Copyright:   (C) 2012-2013  Linaro Limited
  */
diff --git a/arch/arm/plat-versatile/headsmp.S b/arch/arm/mach-versatile/headsmp.S
index 09d9fc30c8ca..99c32db412ae 100644
--- a/arch/arm/plat-versatile/headsmp.S
+++ b/arch/arm/mach-versatile/headsmp.S
@@ -1,7 +1,5 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 /*
- *  linux/arch/arm/plat-versatile/headsmp.S
- *
  *  Copyright (c) 2003 ARM Limited
  *  All Rights Reserved
  */
diff --git a/arch/arm/plat-versatile/hotplug.c b/arch/arm/mach-versatile/hotplug.c
index 2e9dca38bec0..5a152175578b 100644
--- a/arch/arm/plat-versatile/hotplug.c
+++ b/arch/arm/mach-versatile/hotplug.c
@@ -15,7 +15,7 @@
 #include <asm/smp_plat.h>
 #include <asm/cp15.h>
 
-#include <plat/platsmp.h>
+#include "platsmp.h"
 
 static inline void versatile_immitation_enter_lowpower(unsigned int actrl_mask)
 {
diff --git a/arch/arm/mach-integrator/cm.h b/arch/arm/mach-versatile/integrator-cm.h
index f09ea18a50f8..f09ea18a50f8 100644
--- a/arch/arm/mach-integrator/cm.h
+++ b/arch/arm/mach-versatile/integrator-cm.h
diff --git a/arch/arm/mach-integrator/hardware.h b/arch/arm/mach-versatile/integrator-hardware.h
index 4d6ade3dd4ee..81ce09e3ad45 100644
--- a/arch/arm/mach-integrator/hardware.h
+++ b/arch/arm/mach-versatile/integrator-hardware.h
@@ -16,12 +16,7 @@
 #define IO_START		INTEGRATOR_HDR_BASE        // PA of IO
 
 /* macro to get at IO space when running virtually */
-#ifdef CONFIG_MMU
 #define IO_ADDRESS(x)	(((x) & 0x000fffff) | (((x) >> 4) & 0x0ff00000) | IO_BASE)
-#else
-#define IO_ADDRESS(x)	(x)
-#endif
-
 #define __io_address(n)		((void __iomem *)IO_ADDRESS(n))
 
 /*
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-versatile/integrator.c
index 0fe5e1dc9d89..fdf9c4db08a7 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-versatile/integrator.c
@@ -1,7 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- *  linux/arch/arm/mach-integrator/core.c
- *
  *  Copyright (C) 2000-2003 Deep Blue Solutions Ltd
  */
 #include <linux/types.h>
@@ -26,9 +24,9 @@
 #include <asm/mach-types.h>
 #include <asm/mach/time.h>
 
-#include "hardware.h"
-#include "cm.h"
-#include "common.h"
+#include "integrator-hardware.h"
+#include "integrator-cm.h"
+#include "integrator.h"
 
 static DEFINE_RAW_SPINLOCK(cm_lock);
 static void __iomem *cm_base;
diff --git a/arch/arm/mach-integrator/common.h b/arch/arm/mach-versatile/integrator.h
index f053aeebeb7a..f053aeebeb7a 100644
--- a/arch/arm/mach-integrator/common.h
+++ b/arch/arm/mach-versatile/integrator.h
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-versatile/integrator_ap.c
index 58b02cbbea72..4bd6712e9f52 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-versatile/integrator_ap.c
@@ -1,7 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
- *  linux/arch/arm/mach-integrator/integrator_ap.c
- *
  *  Copyright (C) 2000-2003 Deep Blue Solutions Ltd
  */
 #include <linux/kernel.h>
@@ -13,6 +11,7 @@
 #include <linux/of_irq.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
+#include <linux/uaccess.h>
 #include <linux/termios.h>
 #include <linux/mfd/syscon.h>
 #include <linux/regmap.h>
@@ -20,9 +19,9 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include "hardware.h"
-#include "cm.h"
-#include "common.h"
+#include "integrator-hardware.h"
+#include "integrator-cm.h"
+#include "integrator.h"
 
 /* Regmap to the AP system controller */
 static struct regmap *ap_syscon_map;
@@ -147,10 +146,6 @@ struct amba_pl010_data ap_uart_data = {
 	.set_mctrl = integrator_uart_set_mctrl,
 };
 
-void __init ap_init_early(void)
-{
-}
-
 static void __init ap_init_irq_of(void)
 {
 	cm_init();
@@ -195,7 +190,6 @@ static const char * ap_dt_board_compat[] = {
 DT_MACHINE_START(INTEGRATOR_AP_DT, "ARM Integrator/AP (Device Tree)")
 	.reserve	= integrator_reserve,
 	.map_io		= ap_map_io,
-	.init_early	= ap_init_early,
 	.init_irq	= ap_init_irq_of,
 	.init_machine	= ap_init_of,
 	.dt_compat      = ap_dt_board_compat,
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-versatile/integrator_cp.c
index b7eb4038798b..2ed4ded56b3f 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-versatile/integrator_cp.c
@@ -1,7 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- *  linux/arch/arm/mach-integrator/integrator_cp.c
- *
  *  Copyright (C) 2003 Deep Blue Solutions Ltd
  */
 #include <linux/kernel.h>
@@ -18,9 +16,9 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include "hardware.h"
-#include "cm.h"
-#include "common.h"
+#include "integrator-hardware.h"
+#include "integrator-cm.h"
+#include "integrator.h"
 
 /* Base address to the core module header */
 static struct regmap *cm_map;
diff --git a/arch/arm/mach-realview/platsmp-dt.c b/arch/arm/mach-versatile/platsmp-realview.c
index 5ae783767a5d..5d363385c801 100644
--- a/arch/arm/mach-realview/platsmp-dt.c
+++ b/arch/arm/mach-versatile/platsmp-realview.c
@@ -13,7 +13,7 @@
 #include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
 
-#include <plat/platsmp.h>
+#include "platsmp.h"
 
 #define REALVIEW_SYS_FLAGSSET_OFFSET	0x30
 
diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-versatile/platsmp-vexpress.c
index 99c93124aa68..1ee3c45e71c9 100644
--- a/arch/arm/mach-vexpress/platsmp.c
+++ b/arch/arm/mach-versatile/platsmp-vexpress.c
@@ -1,7 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- *  linux/arch/arm/mach-vexpress/platsmp.c
- *
  *  Copyright (C) 2002 ARM Ltd.
  *  All Rights Reserved
  */
@@ -16,9 +14,8 @@
 #include <asm/smp_scu.h>
 #include <asm/mach/map.h>
 
-#include <plat/platsmp.h>
-
-#include "core.h"
+#include "platsmp.h"
+#include "vexpress.h"
 
 bool __init vexpress_smp_init_ops(void)
 {
diff --git a/arch/arm/plat-versatile/platsmp.c b/arch/arm/mach-versatile/platsmp.c
index 3567296cec2a..fa7378321e23 100644
--- a/arch/arm/plat-versatile/platsmp.c
+++ b/arch/arm/mach-versatile/platsmp.c
@@ -1,7 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- *  linux/arch/arm/plat-versatile/platsmp.c
- *
  *  Copyright (C) 2002 ARM Ltd.
  *  All Rights Reserved
  *
@@ -20,7 +18,7 @@
 #include <asm/cacheflush.h>
 #include <asm/smp_plat.h>
 
-#include <plat/platsmp.h>
+#include "platsmp.h"
 
 /*
  * versatile_cpu_release controls the release of CPUs from the holding
diff --git a/arch/arm/plat-versatile/include/plat/platsmp.h b/arch/arm/mach-versatile/platsmp.h
index 500605f48b80..171a0ab72220 100644
--- a/arch/arm/plat-versatile/include/plat/platsmp.h
+++ b/arch/arm/mach-versatile/platsmp.h
@@ -1,7 +1,5 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 /*
- *  linux/arch/arm/plat-versatile/include/plat/platsmp.h
- *
  *  Copyright (C) 2011 ARM Ltd.
  *  All Rights Reserved
  */
diff --git a/arch/arm/mach-realview/realview-dt.c b/arch/arm/mach-versatile/realview.c
index feab66080ba2..feab66080ba2 100644
--- a/arch/arm/mach-realview/realview-dt.c
+++ b/arch/arm/mach-versatile/realview.c
diff --git a/arch/arm/mach-vexpress/spc.c b/arch/arm/mach-versatile/spc.c
index 1da11bdb1dfb..5e44170e1a9a 100644
--- a/arch/arm/mach-vexpress/spc.c
+++ b/arch/arm/mach-versatile/spc.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Versatile Express Serial Power Controller (SPC) support
  *
@@ -6,15 +7,6 @@
  * Authors: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
  *          Achin Gupta           <achin.gupta@arm.com>
  *          Lorenzo Pieralisi     <lorenzo.pieralisi@arm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/clk-provider.h>
@@ -122,13 +114,13 @@ static inline bool cluster_is_a15(u32 cluster)
 }
 
 /**
- * ve_spc_global_wakeup_irq()
+ * ve_spc_global_wakeup_irq() - sets/clears global wakeup IRQs
+ *
+ * @set: if true, global wake-up IRQs are set, if false they are cleared
  *
  * Function to set/clear global wakeup IRQs. Not protected by locking since
  * it might be used in code paths where normal cacheable locks are not
  * working. Locking must be provided by the caller to ensure atomicity.
- *
- * @set: if true, global wake-up IRQs are set, if false they are cleared
  */
 void ve_spc_global_wakeup_irq(bool set)
 {
@@ -145,15 +137,15 @@ void ve_spc_global_wakeup_irq(bool set)
 }
 
 /**
- * ve_spc_cpu_wakeup_irq()
- *
- * Function to set/clear per-CPU wake-up IRQs. Not protected by locking since
- * it might be used in code paths where normal cacheable locks are not
- * working. Locking must be provided by the caller to ensure atomicity.
+ * ve_spc_cpu_wakeup_irq() - sets/clears per-CPU wake-up IRQs
  *
  * @cluster: mpidr[15:8] bitfield describing cluster affinity level
  * @cpu: mpidr[7:0] bitfield describing cpu affinity level
  * @set: if true, wake-up IRQs are set, if false they are cleared
+ *
+ * Function to set/clear per-CPU wake-up IRQs. Not protected by locking since
+ * it might be used in code paths where normal cacheable locks are not
+ * working. Locking must be provided by the caller to ensure atomicity.
  */
 void ve_spc_cpu_wakeup_irq(u32 cluster, u32 cpu, bool set)
 {
@@ -200,14 +192,14 @@ void ve_spc_set_resume_addr(u32 cluster, u32 cpu, u32 addr)
 }
 
 /**
- * ve_spc_powerdown()
+ * ve_spc_powerdown() - enables/disables cluster powerdown
+ *
+ * @cluster: mpidr[15:8] bitfield describing cluster affinity level
+ * @enable: if true enables powerdown, if false disables it
  *
  * Function to enable/disable cluster powerdown. Not protected by locking
  * since it might be used in code paths where normal cacheable locks are not
  * working. Locking must be provided by the caller to ensure atomicity.
- *
- * @cluster: mpidr[15:8] bitfield describing cluster affinity level
- * @enable: if true enables powerdown, if false disables it
  */
 void ve_spc_powerdown(u32 cluster, bool enable)
 {
@@ -228,7 +220,7 @@ static u32 standbywfi_cpu_mask(u32 cpu, u32 cluster)
 }
 
 /**
- * ve_spc_cpu_in_wfi(u32 cpu, u32 cluster)
+ * ve_spc_cpu_in_wfi() - Checks if the specified CPU is in WFI or not
  *
  * @cpu: mpidr[7:0] bitfield describing CPU affinity level within cluster
  * @cluster: mpidr[15:8] bitfield describing cluster affinity level
@@ -580,7 +572,7 @@ static int __init ve_spc_clk_init(void)
 		}
 
 		cluster = topology_physical_package_id(cpu_dev->id);
-		if (init_opp_table[cluster])
+		if (cluster < 0 || init_opp_table[cluster])
 			continue;
 
 		if (ve_init_opp_table(cpu_dev))
diff --git a/arch/arm/mach-vexpress/spc.h b/arch/arm/mach-versatile/spc.h
index 288569fdfcb9..288569fdfcb9 100644
--- a/arch/arm/mach-vexpress/spc.h
+++ b/arch/arm/mach-versatile/spc.h
diff --git a/arch/arm/mach-vexpress/tc2_pm.c b/arch/arm/mach-versatile/tc2_pm.c
index e96c42ae3602..0fe78da0c109 100644
--- a/arch/arm/mach-vexpress/tc2_pm.c
+++ b/arch/arm/mach-versatile/tc2_pm.c
@@ -1,7 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * arch/arm/mach-vexpress/tc2_pm.c - TC2 power management support
- *
  * Created by:	Nicolas Pitre, October 2012
  * Copyright:	(C) 2012-2013  Linaro Limited
  *
diff --git a/arch/arm/mach-vexpress/v2m-mps2.c b/arch/arm/mach-versatile/v2m-mps2.c
index 5b50d8e95cd7..5b50d8e95cd7 100644
--- a/arch/arm/mach-vexpress/v2m-mps2.c
+++ b/arch/arm/mach-versatile/v2m-mps2.c
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-versatile/v2m.c
index ffe7c7a85ae9..79afdf2a90b6 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-versatile/v2m.c
@@ -3,7 +3,7 @@
 #include <linux/of_address.h>
 #include <asm/mach/arch.h>
 
-#include "core.h"
+#include "vexpress.h"
 
 #define SYS_FLAGSSET		0x030
 #define SYS_FLAGSCLR		0x034
diff --git a/arch/arm/mach-versatile/versatile_dt.c b/arch/arm/mach-versatile/versatile.c
index 02ba68abe533..02ba68abe533 100644
--- a/arch/arm/mach-versatile/versatile_dt.c
+++ b/arch/arm/mach-versatile/versatile.c
diff --git a/arch/arm/mach-vexpress/core.h b/arch/arm/mach-versatile/vexpress.h
index bda78675c55d..bda78675c55d 100644
--- a/arch/arm/mach-vexpress/core.h
+++ b/arch/arm/mach-versatile/vexpress.h
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
deleted file mode 100644
index 2e6aff5a0f17..000000000000
--- a/arch/arm/mach-vexpress/Kconfig
+++ /dev/null
@@ -1,81 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-menuconfig ARCH_VEXPRESS
-	bool "ARM Ltd. Versatile Express family"
-	depends on ARCH_MULTI_V7
-	select ARCH_SUPPORTS_BIG_ENDIAN
-	select ARM_AMBA
-	select ARM_GIC
-	select ARM_GLOBAL_TIMER
-	select ARM_TIMER_SP804
-	select GPIOLIB
-	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if SMP
-	select HAVE_PATA_PLATFORM
-	select CLK_ICST
-	select NO_IOPORT_MAP
-	select PLAT_VERSATILE
-	select POWER_RESET
-	select POWER_RESET_VEXPRESS
-	select POWER_SUPPLY
-	select REGULATOR if MMC_ARMMMCI
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	select VEXPRESS_CONFIG
-	help
-	  This option enables support for systems using Cortex processor based
-	  ARM core and logic (FPGA) tiles on the Versatile Express motherboard,
-	  for example:
-
-	  - CoreTile Express A5x2 (V2P-CA5s)
-	  - CoreTile Express A9x4 (V2P-CA9)
-	  - CoreTile Express A15x2 (V2P-CA15)
-	  - LogicTile Express 13MG (V2F-2XV6) with A5, A7, A9 or A15 SMMs
-	    (Soft Macrocell Models)
-	  - Versatile Express RTSMs (Models)
-
-	  You must boot using a Flattened Device Tree in order to use these
-	  platforms. The traditional (ATAGs) boot method is not usable on
-	  these boards with this option.
-
-if ARCH_VEXPRESS
-
-config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA
-	bool "Enable A5 and A9 only errata work-arounds"
-	default y
-	select ARM_ERRATA_643719 if SMP
-	select ARM_ERRATA_720789
-	select PL310_ERRATA_753970 if CACHE_L2X0
-	help
-	  Provides common dependencies for Versatile Express platforms
-	  based on Cortex-A5 and Cortex-A9 processors. In order to
-	  build a working kernel, you must also enable relevant core
-	  tile support or Flattened Device Tree based support options.
-
-config ARCH_VEXPRESS_DCSCB
-	bool "Dual Cluster System Control Block (DCSCB) support"
-	depends on MCPM
-	select ARM_CCI400_PORT_CTRL
-	help
-	  Support for the Dual Cluster System Configuration Block (DCSCB).
-	  This is needed to provide CPU and cluster power management
-	  on RTSM implementing big.LITTLE.
-
-config ARCH_VEXPRESS_SPC
-	bool "Versatile Express Serial Power Controller (SPC)"
-	select PM_OPP
-	help
-	  The TC2 (A15x2 A7x3) versatile express core tile integrates a logic
-	  block called Serial Power Controller (SPC) that provides the interface
-	  between the dual cluster test-chip and the M3 microcontroller that
-	  carries out power management.
-
-config ARCH_VEXPRESS_TC2_PM
-	bool "Versatile Express TC2 power management"
-	depends on MCPM
-	select ARM_CCI400_PORT_CTRL
-	select ARCH_VEXPRESS_SPC
-	select ARM_CPU_SUSPEND
-	help
-	  Support for CPU and cluster power management on Versatile Express
-	  with a TC2 (A15x2 A7x3) big.LITTLE core tile.
-
-endif
diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile
deleted file mode 100644
index 3651a1ed0f2b..000000000000
--- a/arch/arm/mach-vexpress/Makefile
+++ /dev/null
@@ -1,19 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the linux kernel.
-#
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := \
-	-I$(srctree)/arch/arm/plat-versatile/include
-
-obj-$(CONFIG_ARCH_VEXPRESS)		:= v2m.o
-obj-$(CONFIG_ARCH_VEXPRESS_DCSCB)	+= dcscb.o	dcscb_setup.o
-CFLAGS_dcscb.o				+= -march=armv7-a
-CFLAGS_REMOVE_dcscb.o			= -pg
-obj-$(CONFIG_ARCH_VEXPRESS_SPC)		+= spc.o
-CFLAGS_REMOVE_spc.o			= -pg
-obj-$(CONFIG_ARCH_VEXPRESS_TC2_PM)	+= tc2_pm.o
-CFLAGS_tc2_pm.o				+= -march=armv7-a
-CFLAGS_REMOVE_tc2_pm.o			= -pg
-obj-$(CONFIG_SMP)			+= platsmp.o
-
-obj-$(CONFIG_ARCH_MPS2)			+= v2m-mps2.o
diff --git a/arch/arm/mach-vexpress/Makefile.boot b/arch/arm/mach-vexpress/Makefile.boot
deleted file mode 100644
index cec195d4fcba..000000000000
--- a/arch/arm/mach-vexpress/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-# Empty file waiting for deletion once Makefile.boot isn't needed any more.
-# Patch waits for application at
-# http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=7889/1 .
diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig
index d01cdd9ad9c7..1aad54ea3c3d 100644
--- a/arch/arm/mach-vt8500/Kconfig
+++ b/arch/arm/mach-vt8500/Kconfig
@@ -10,6 +10,7 @@ config ARCH_VT8500
 config ARCH_WM8505
 	bool "VIA/Wondermedia 85xx and WM8650"
  	depends on ARCH_MULTI_V5
+	depends on CPU_LITTLE_ENDIAN
  	select ARCH_VT8500
  	select CPU_ARM926T
 
diff --git a/arch/arm/mach-vt8500/Makefile.boot b/arch/arm/mach-vt8500/Makefile.boot
deleted file mode 100644
index 883985f4b6c1..000000000000
--- a/arch/arm/mach-vt8500/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x01000000
diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
index a56748d671c4..05be5aa9b402 100644
--- a/arch/arm/mach-zynq/Kconfig
+++ b/arch/arm/mach-zynq/Kconfig
@@ -3,7 +3,6 @@ config ARCH_ZYNQ
 	bool "Xilinx Zynq ARM Cortex A9 Platform"
 	depends on ARCH_MULTI_V7
 	select ARCH_HAS_RESET_CONTROLLER
-	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_AMBA
 	select ARM_GIC
 	select ARM_GLOBAL_TIMER
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index e1ca6a5732d2..15e8a321a713 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -77,6 +77,7 @@ static int __init zynq_get_revision(void)
 	}
 
 	zynq_devcfg_base = of_iomap(np, 0);
+	of_node_put(np);
 	if (!zynq_devcfg_base) {
 		pr_err("%s: Unable to map I/O memory\n", __func__);
 		return -1;
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 58afba346729..fc439c2c16f8 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -386,6 +386,7 @@ config CPU_V6
 	select CPU_PABRT_V6
 	select CPU_THUMB_CAPABLE
 	select CPU_TLB_V6 if MMU
+	select SMP_ON_UP if SMP
 
 # ARMv6k
 config CPU_V6K
@@ -630,7 +631,11 @@ config CPU_USE_DOMAINS
 	bool
 	help
 	  This option enables or disables the use of domain switching
-	  via the set_fs() function.
+	  using the DACR (domain access control register) to protect memory
+	  domains from each other. In Linux we use three domains: kernel, user
+	  and IO. The domains are used to protect userspace from kernelspace
+	  and to handle IO-space as a special type of memory by assigning
+	  manager or client roles to running code (such as a process).
 
 config CPU_V7M_NUM_IRQ
 	int "Number of external interrupts connected to the NVIC"
@@ -737,15 +742,29 @@ config SWP_EMULATE
 
 	  If unsure, say Y.
 
+choice
+	prompt "CPU Endianess"
+	default CPU_LITTLE_ENDIAN
+
+config CPU_LITTLE_ENDIAN
+	bool "Built little-endian kernel"
+	help
+	  Say Y if you plan on running a kernel in little-endian mode.
+	  This is the default and is used in practically all modern user
+	  space builds.
+
 config CPU_BIG_ENDIAN
 	bool "Build big-endian kernel"
-	depends on ARCH_SUPPORTS_BIG_ENDIAN
 	depends on !LD_IS_LLD
 	help
 	  Say Y if you plan on running a kernel in big-endian mode.
-	  Note that your board must be properly built and your board
-	  port must properly enable any big-endian related features
-	  of your chipset/board/processor.
+	  This works on many machines using ARMv6 or newer processors
+	  but requires big-endian user space.
+
+	  The only ARMv5 platform with big-endian support is
+	  Intel IXP4xx.
+
+endchoice
 
 config CPU_ENDIAN_BE8
 	bool
@@ -830,6 +849,7 @@ config CPU_BPREDICT_DISABLE
 
 config CPU_SPECTRE
 	bool
+	select GENERIC_CPU_VULNERABILITIES
 
 config HARDEN_BRANCH_PREDICTOR
 	bool "Harden the branch predictor against aliasing attacks" if EXPERT
@@ -850,6 +870,16 @@ config HARDEN_BRANCH_PREDICTOR
 
 	   If unsure, say Y.
 
+config HARDEN_BRANCH_HISTORY
+	bool "Harden Spectre style attacks against branch history" if EXPERT
+	depends on CPU_SPECTRE
+	default y
+	help
+	  Speculation attacks against some high-performance processors can
+	  make use of branch history to influence future speculation. When
+	  taking an exception, a sequence of branches overwrites the branch
+	  history, or branch history is invalidated.
+
 config TLS_REG_EMUL
 	bool
 	select NEED_KUSER_HELPERS
@@ -1110,12 +1140,6 @@ config ARM_DMA_MEM_BUFFERABLE
 config ARM_HEAVY_MB
 	bool
 
-config ARCH_SUPPORTS_BIG_ENDIAN
-	bool
-	help
-	  This option specifies the architecture can support big endian
-	  operation.
-
 config DEBUG_ALIGN_RODATA
 	bool "Make rodata strictly non-executable"
 	depends on STRICT_KERNEL_RWX
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index 6f499559d193..f8dd0b3cc8e0 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -935,6 +935,9 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	if (type == TYPE_LDST)
 		do_alignment_finish_ldst(addr, instr, regs, offset);
 
+	if (thumb_mode(regs))
+		regs->ARM_cpsr = it_advance(regs->ARM_cpsr);
+
 	return 0;
 
  bad_or_fault:
diff --git a/arch/arm/mm/cache-b15-rac.c b/arch/arm/mm/cache-b15-rac.c
index bdc07030997b..9c1172f26885 100644
--- a/arch/arm/mm/cache-b15-rac.c
+++ b/arch/arm/mm/cache-b15-rac.c
@@ -74,7 +74,7 @@ static inline void __b15_rac_flush(void)
 	__raw_writel(FLUSH_RAC, b15_rac_base + rac_flush_offset);
 	do {
 		/* This dmb() is required to force the Bus Interface Unit
-		 * to clean oustanding writes, and forces an idle cycle
+		 * to clean outstanding writes, and forces an idle cycle
 		 * to be inserted.
 		 */
 		dmb();
diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c
index 5c1b7a7b9af6..25dbd84a1aaf 100644
--- a/arch/arm/mm/cache-feroceon-l2.c
+++ b/arch/arm/mm/cache-feroceon-l2.c
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mm/cache-feroceon-l2.c - Feroceon L2 cache controller support
  *
  * Copyright (C) 2008 Marvell Semiconductor
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
  * References:
  * - Unified Layer 2 Cache for Feroceon CPU Cores,
  *   Document ID MV-S104858-00, Rev. A, October 23 2007.
diff --git a/arch/arm/mm/cache-tauros2.c b/arch/arm/mm/cache-tauros2.c
index 88255bea65e4..b1e1aba602f7 100644
--- a/arch/arm/mm/cache-tauros2.c
+++ b/arch/arm/mm/cache-tauros2.c
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mm/cache-tauros2.c - Tauros2 L2 cache controller support
  *
  * Copyright (C) 2008 Marvell Semiconductor
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
  * References:
  * - PJ1 CPU Core Datasheet,
  *   Document ID MV-S104837-01, Rev 0.7, January 24 2008.
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index 830bbfb26ca5..7c9499b728c4 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -90,7 +90,7 @@ ENDPROC(v7_flush_icache_all)
  *
  *     Flush the D-cache up to the Level of Unification Inner Shareable
  *
- *     Corrupted registers: r0-r7, r9-r11 (r6 only in Thumb mode)
+ *     Corrupted registers: r0-r6, r9-r10
  */
 
 ENTRY(v7_flush_dcache_louis)
@@ -117,7 +117,7 @@ ENDPROC(v7_flush_dcache_louis)
  *
  *	Flush the whole D-cache.
  *
- *	Corrupted registers: r0-r7, r9-r11 (r6 only in Thumb mode)
+ *	Corrupted registers: r0-r6, r9-r10
  *
  *	- mm    - mm_struct describing address space
  */
@@ -149,22 +149,22 @@ flush_levels:
 	movw	r4, #0x3ff
 	ands	r4, r4, r1, lsr #3		@ find maximum number on the way size
 	clz	r5, r4				@ find bit position of way size increment
-	movw	r7, #0x7fff
-	ands	r7, r7, r1, lsr #13		@ extract max number of the index size
+	movw	r6, #0x7fff
+	and	r1, r6, r1, lsr #13		@ extract max number of the index size
+	mov	r6, #1
+	movne	r4, r4, lsl r5			@ # of ways shifted into bits [31:...]
+	movne	r6, r6, lsl r5			@ 1 shifted left by same amount
 loop1:
-	mov	r9, r7				@ create working copy of max index
+	mov	r9, r1				@ create working copy of max index
 loop2:
- ARM(	orr	r11, r10, r4, lsl r5	)	@ factor way and cache number into r11
- THUMB(	lsl	r6, r4, r5		)
- THUMB(	orr	r11, r10, r6		)	@ factor way and cache number into r11
- ARM(	orr	r11, r11, r9, lsl r2	)	@ factor index number into r11
- THUMB(	lsl	r6, r9, r2		)
- THUMB(	orr	r11, r11, r6		)	@ factor index number into r11
-	mcr	p15, 0, r11, c7, c14, 2		@ clean & invalidate by set/way
+	mov	r5, r9, lsl r2			@ factor set number into r5
+	orr	r5, r5, r4			@ factor way number into r5
+	orr	r5, r5, r10			@ factor cache level into r5
+	mcr	p15, 0, r5, c7, c14, 2		@ clean & invalidate by set/way
 	subs	r9, r9, #1			@ decrement the index
 	bge	loop2
-	subs	r4, r4, #1			@ decrement the way
-	bge	loop1
+	subs	r4, r4, r6			@ decrement the way
+	bcs	loop1
 skip:
 	add	r10, r10, #2			@ increment cache number
 	cmp	r3, r10
@@ -192,14 +192,12 @@ ENDPROC(v7_flush_dcache_all)
  *
  */
 ENTRY(v7_flush_kern_cache_all)
- ARM(	stmfd	sp!, {r4-r5, r7, r9-r11, lr}	)
- THUMB(	stmfd	sp!, {r4-r7, r9-r11, lr}	)
+	stmfd	sp!, {r4-r6, r9-r10, lr}
 	bl	v7_flush_dcache_all
 	mov	r0, #0
 	ALT_SMP(mcr	p15, 0, r0, c7, c1, 0)	@ invalidate I-cache inner shareable
 	ALT_UP(mcr	p15, 0, r0, c7, c5, 0)	@ I+BTB cache invalidate
- ARM(	ldmfd	sp!, {r4-r5, r7, r9-r11, lr}	)
- THUMB(	ldmfd	sp!, {r4-r7, r9-r11, lr}	)
+	ldmfd	sp!, {r4-r6, r9-r10, lr}
 	ret	lr
 ENDPROC(v7_flush_kern_cache_all)
 
@@ -210,14 +208,12 @@ ENDPROC(v7_flush_kern_cache_all)
  *     Invalidate the I-cache to the point of unification.
  */
 ENTRY(v7_flush_kern_cache_louis)
- ARM(	stmfd	sp!, {r4-r5, r7, r9-r11, lr}	)
- THUMB(	stmfd	sp!, {r4-r7, r9-r11, lr}	)
+	stmfd	sp!, {r4-r6, r9-r10, lr}
 	bl	v7_flush_dcache_louis
 	mov	r0, #0
 	ALT_SMP(mcr	p15, 0, r0, c7, c1, 0)	@ invalidate I-cache inner shareable
 	ALT_UP(mcr	p15, 0, r0, c7, c5, 0)	@ I+BTB cache invalidate
- ARM(	ldmfd	sp!, {r4-r5, r7, r9-r11, lr}	)
- THUMB(	ldmfd	sp!, {r4-r7, r9-r11, lr}	)
+	ldmfd	sp!, {r4-r6, r9-r10, lr}
 	ret	lr
 ENDPROC(v7_flush_kern_cache_louis)
 
diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c
index 48091870db89..4204ffa2d104 100644
--- a/arch/arm/mm/context.c
+++ b/arch/arm/mm/context.c
@@ -240,8 +240,7 @@ void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk)
 	unsigned int cpu = smp_processor_id();
 	u64 asid;
 
-	if (unlikely(mm->context.vmalloc_seq != init_mm.context.vmalloc_seq))
-		__check_vmalloc_seq(mm);
+	check_vmalloc_seq(mm);
 
 	/*
 	 * We cannot update the pgd and the ASID atomicly with classic
diff --git a/arch/arm/mm/copypage-xsc3.c b/arch/arm/mm/copypage-xsc3.c
index 6f0909dda2f9..c86e79677ff9 100644
--- a/arch/arm/mm/copypage-xsc3.c
+++ b/arch/arm/mm/copypage-xsc3.c
@@ -29,6 +29,7 @@ static void xsc3_mc_copy_user_page(void *kto, const void *kfrom)
 	int tmp;
 
 	asm volatile ("\
+.arch xscale					\n\
 	pld	[%1, #0]			\n\
 	pld	[%1, #32]			\n\
 1:	pld	[%1, #64]			\n\
@@ -80,6 +81,7 @@ void xsc3_mc_clear_user_highpage(struct page *page, unsigned long vaddr)
 {
 	void *ptr, *kaddr = kmap_atomic(page);
 	asm volatile ("\
+.arch xscale					\n\
 	mov	r1, %2				\n\
 	mov	r2, #0				\n\
 	mov	r3, #0				\n\
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 4b61541853ea..d7909091cf97 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -33,7 +33,7 @@
 #include <asm/dma-iommu.h>
 #include <asm/mach/map.h>
 #include <asm/system_info.h>
-#include <xen/swiotlb-xen.h>
+#include <asm/xen/xen-ops.h>
 
 #include "dma.h"
 #include "mm.h"
@@ -103,139 +103,6 @@ static struct arm_dma_buffer *arm_dma_buffer_find(void *virt)
  * before transfers and delay cache invalidation until transfer completion.
  *
  */
-static void __dma_page_cpu_to_dev(struct page *, unsigned long,
-		size_t, enum dma_data_direction);
-static void __dma_page_dev_to_cpu(struct page *, unsigned long,
-		size_t, enum dma_data_direction);
-
-/**
- * arm_dma_map_page - map a portion of a page for streaming DMA
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @page: page that buffer resides in
- * @offset: offset into page for start of buffer
- * @size: size of buffer to map
- * @dir: DMA transfer direction
- *
- * Ensure that any data held in the cache is appropriately discarded
- * or written back.
- *
- * The device owns this memory once this call has completed.  The CPU
- * can regain ownership by calling dma_unmap_page().
- */
-static dma_addr_t arm_dma_map_page(struct device *dev, struct page *page,
-	     unsigned long offset, size_t size, enum dma_data_direction dir,
-	     unsigned long attrs)
-{
-	if ((attrs & DMA_ATTR_SKIP_CPU_SYNC) == 0)
-		__dma_page_cpu_to_dev(page, offset, size, dir);
-	return pfn_to_dma(dev, page_to_pfn(page)) + offset;
-}
-
-static dma_addr_t arm_coherent_dma_map_page(struct device *dev, struct page *page,
-	     unsigned long offset, size_t size, enum dma_data_direction dir,
-	     unsigned long attrs)
-{
-	return pfn_to_dma(dev, page_to_pfn(page)) + offset;
-}
-
-/**
- * arm_dma_unmap_page - unmap a buffer previously mapped through dma_map_page()
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @handle: DMA address of buffer
- * @size: size of buffer (same as passed to dma_map_page)
- * @dir: DMA transfer direction (same as passed to dma_map_page)
- *
- * Unmap a page streaming mode DMA translation.  The handle and size
- * must match what was provided in the previous dma_map_page() call.
- * All other usages are undefined.
- *
- * After this call, reads by the CPU to the buffer are guaranteed to see
- * whatever the device wrote there.
- */
-static void arm_dma_unmap_page(struct device *dev, dma_addr_t handle,
-		size_t size, enum dma_data_direction dir, unsigned long attrs)
-{
-	if ((attrs & DMA_ATTR_SKIP_CPU_SYNC) == 0)
-		__dma_page_dev_to_cpu(pfn_to_page(dma_to_pfn(dev, handle)),
-				      handle & ~PAGE_MASK, size, dir);
-}
-
-static void arm_dma_sync_single_for_cpu(struct device *dev,
-		dma_addr_t handle, size_t size, enum dma_data_direction dir)
-{
-	unsigned int offset = handle & (PAGE_SIZE - 1);
-	struct page *page = pfn_to_page(dma_to_pfn(dev, handle-offset));
-	__dma_page_dev_to_cpu(page, offset, size, dir);
-}
-
-static void arm_dma_sync_single_for_device(struct device *dev,
-		dma_addr_t handle, size_t size, enum dma_data_direction dir)
-{
-	unsigned int offset = handle & (PAGE_SIZE - 1);
-	struct page *page = pfn_to_page(dma_to_pfn(dev, handle-offset));
-	__dma_page_cpu_to_dev(page, offset, size, dir);
-}
-
-/*
- * Return whether the given device DMA address mask can be supported
- * properly.  For example, if your device can only drive the low 24-bits
- * during bus mastering, then you would pass 0x00ffffff as the mask
- * to this function.
- */
-static int arm_dma_supported(struct device *dev, u64 mask)
-{
-	unsigned long max_dma_pfn = min(max_pfn - 1, arm_dma_pfn_limit);
-
-	/*
-	 * Translate the device's DMA mask to a PFN limit.  This
-	 * PFN number includes the page which we can DMA to.
-	 */
-	return dma_to_pfn(dev, mask) >= max_dma_pfn;
-}
-
-const struct dma_map_ops arm_dma_ops = {
-	.alloc			= arm_dma_alloc,
-	.free			= arm_dma_free,
-	.alloc_pages		= dma_direct_alloc_pages,
-	.free_pages		= dma_direct_free_pages,
-	.mmap			= arm_dma_mmap,
-	.get_sgtable		= arm_dma_get_sgtable,
-	.map_page		= arm_dma_map_page,
-	.unmap_page		= arm_dma_unmap_page,
-	.map_sg			= arm_dma_map_sg,
-	.unmap_sg		= arm_dma_unmap_sg,
-	.map_resource		= dma_direct_map_resource,
-	.sync_single_for_cpu	= arm_dma_sync_single_for_cpu,
-	.sync_single_for_device	= arm_dma_sync_single_for_device,
-	.sync_sg_for_cpu	= arm_dma_sync_sg_for_cpu,
-	.sync_sg_for_device	= arm_dma_sync_sg_for_device,
-	.dma_supported		= arm_dma_supported,
-	.get_required_mask	= dma_direct_get_required_mask,
-};
-EXPORT_SYMBOL(arm_dma_ops);
-
-static void *arm_coherent_dma_alloc(struct device *dev, size_t size,
-	dma_addr_t *handle, gfp_t gfp, unsigned long attrs);
-static void arm_coherent_dma_free(struct device *dev, size_t size, void *cpu_addr,
-				  dma_addr_t handle, unsigned long attrs);
-static int arm_coherent_dma_mmap(struct device *dev, struct vm_area_struct *vma,
-		 void *cpu_addr, dma_addr_t dma_addr, size_t size,
-		 unsigned long attrs);
-
-const struct dma_map_ops arm_coherent_dma_ops = {
-	.alloc			= arm_coherent_dma_alloc,
-	.free			= arm_coherent_dma_free,
-	.alloc_pages		= dma_direct_alloc_pages,
-	.free_pages		= dma_direct_free_pages,
-	.mmap			= arm_coherent_dma_mmap,
-	.get_sgtable		= arm_dma_get_sgtable,
-	.map_page		= arm_coherent_dma_map_page,
-	.map_sg			= arm_dma_map_sg,
-	.map_resource		= dma_direct_map_resource,
-	.dma_supported		= arm_dma_supported,
-	.get_required_mask	= dma_direct_get_required_mask,
-};
-EXPORT_SYMBOL(arm_coherent_dma_ops);
 
 static void __dma_clear_buffer(struct page *page, size_t size, int coherent_flag)
 {
@@ -381,6 +248,7 @@ out:
  */
 postcore_initcall(atomic_pool_init);
 
+#ifdef CONFIG_CMA_AREAS
 struct dma_contig_early_reserve {
 	phys_addr_t base;
 	unsigned long size;
@@ -435,10 +303,11 @@ void __init dma_contiguous_remap(void)
 		iotable_init(&map, 1);
 	}
 }
+#endif
 
 static int __dma_update_pte(pte_t *pte, unsigned long addr, void *data)
 {
-	struct page *page = virt_to_page(addr);
+	struct page *page = virt_to_page((void *)addr);
 	pgprot_t prot = *(pgprot_t *)data;
 
 	set_pte_ext(pte, mk_pte(page, prot), 0);
@@ -707,7 +576,7 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
 
 	*handle = DMA_MAPPING_ERROR;
 	allowblock = gfpflags_allow_blocking(gfp);
-	cma = allowblock ? dev_get_cma_area(dev) : false;
+	cma = allowblock ? dev_get_cma_area(dev) : NULL;
 
 	if (cma)
 		buf->allocator = &cma_allocator;
@@ -723,7 +592,7 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
 	if (page) {
 		unsigned long flags;
 
-		*handle = pfn_to_dma(dev, page_to_pfn(page));
+		*handle = phys_to_dma(dev, page_to_phys(page));
 		buf->virt = args.want_vaddr ? addr : page;
 
 		spin_lock_irqsave(&arm_dma_bufs_lock, flags);
@@ -737,74 +606,13 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
 }
 
 /*
- * Allocate DMA-coherent memory space and return both the kernel remapped
- * virtual and bus address for that space.
- */
-void *arm_dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
-		    gfp_t gfp, unsigned long attrs)
-{
-	pgprot_t prot = __get_dma_pgprot(attrs, PAGE_KERNEL);
-
-	return __dma_alloc(dev, size, handle, gfp, prot, false,
-			   attrs, __builtin_return_address(0));
-}
-
-static void *arm_coherent_dma_alloc(struct device *dev, size_t size,
-	dma_addr_t *handle, gfp_t gfp, unsigned long attrs)
-{
-	return __dma_alloc(dev, size, handle, gfp, PAGE_KERNEL, true,
-			   attrs, __builtin_return_address(0));
-}
-
-static int __arm_dma_mmap(struct device *dev, struct vm_area_struct *vma,
-		 void *cpu_addr, dma_addr_t dma_addr, size_t size,
-		 unsigned long attrs)
-{
-	int ret = -ENXIO;
-	unsigned long nr_vma_pages = vma_pages(vma);
-	unsigned long nr_pages = PAGE_ALIGN(size) >> PAGE_SHIFT;
-	unsigned long pfn = dma_to_pfn(dev, dma_addr);
-	unsigned long off = vma->vm_pgoff;
-
-	if (dma_mmap_from_dev_coherent(dev, vma, cpu_addr, size, &ret))
-		return ret;
-
-	if (off < nr_pages && nr_vma_pages <= (nr_pages - off)) {
-		ret = remap_pfn_range(vma, vma->vm_start,
-				      pfn + off,
-				      vma->vm_end - vma->vm_start,
-				      vma->vm_page_prot);
-	}
-
-	return ret;
-}
-
-/*
- * Create userspace mapping for the DMA-coherent memory.
- */
-static int arm_coherent_dma_mmap(struct device *dev, struct vm_area_struct *vma,
-		 void *cpu_addr, dma_addr_t dma_addr, size_t size,
-		 unsigned long attrs)
-{
-	return __arm_dma_mmap(dev, vma, cpu_addr, dma_addr, size, attrs);
-}
-
-int arm_dma_mmap(struct device *dev, struct vm_area_struct *vma,
-		 void *cpu_addr, dma_addr_t dma_addr, size_t size,
-		 unsigned long attrs)
-{
-	vma->vm_page_prot = __get_dma_pgprot(attrs, vma->vm_page_prot);
-	return __arm_dma_mmap(dev, vma, cpu_addr, dma_addr, size, attrs);
-}
-
-/*
  * Free a buffer as defined by the above mapping.
  */
 static void __arm_dma_free(struct device *dev, size_t size, void *cpu_addr,
 			   dma_addr_t handle, unsigned long attrs,
 			   bool is_coherent)
 {
-	struct page *page = pfn_to_page(dma_to_pfn(dev, handle));
+	struct page *page = phys_to_page(dma_to_phys(dev, handle));
 	struct arm_dma_buffer *buf;
 	struct arm_dma_free_args args = {
 		.dev = dev,
@@ -822,40 +630,6 @@ static void __arm_dma_free(struct device *dev, size_t size, void *cpu_addr,
 	kfree(buf);
 }
 
-void arm_dma_free(struct device *dev, size_t size, void *cpu_addr,
-		  dma_addr_t handle, unsigned long attrs)
-{
-	__arm_dma_free(dev, size, cpu_addr, handle, attrs, false);
-}
-
-static void arm_coherent_dma_free(struct device *dev, size_t size, void *cpu_addr,
-				  dma_addr_t handle, unsigned long attrs)
-{
-	__arm_dma_free(dev, size, cpu_addr, handle, attrs, true);
-}
-
-int arm_dma_get_sgtable(struct device *dev, struct sg_table *sgt,
-		 void *cpu_addr, dma_addr_t handle, size_t size,
-		 unsigned long attrs)
-{
-	unsigned long pfn = dma_to_pfn(dev, handle);
-	struct page *page;
-	int ret;
-
-	/* If the PFN is not valid, we do not have a struct page */
-	if (!pfn_valid(pfn))
-		return -ENXIO;
-
-	page = pfn_to_page(pfn);
-
-	ret = sg_alloc_table(sgt, 1, GFP_KERNEL);
-	if (unlikely(ret))
-		return ret;
-
-	sg_set_page(sgt->sgl, page, PAGE_ALIGN(size), 0);
-	return 0;
-}
-
 static void dma_cache_maint_page(struct page *page, unsigned long offset,
 	size_t size, enum dma_data_direction dir,
 	void (*op)(const void *, size_t, int))
@@ -905,8 +679,7 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset,
 
 /*
  * Make an area consistent for devices.
- * Note: Drivers should NOT use this function directly, as it will break
- * platforms with CONFIG_DMABOUNCE.
+ * Note: Drivers should NOT use this function directly.
  * Use the driver DMA support - see dma-mapping.h (dma_sync_*)
  */
 static void __dma_page_cpu_to_dev(struct page *page, unsigned long off,
@@ -959,122 +732,6 @@ static void __dma_page_dev_to_cpu(struct page *page, unsigned long off,
 	}
 }
 
-/**
- * arm_dma_map_sg - map a set of SG buffers for streaming mode DMA
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @sg: list of buffers
- * @nents: number of buffers to map
- * @dir: DMA transfer direction
- *
- * Map a set of buffers described by scatterlist in streaming mode for DMA.
- * This is the scatter-gather version of the dma_map_single interface.
- * Here the scatter gather list elements are each tagged with the
- * appropriate dma address and length.  They are obtained via
- * sg_dma_{address,length}.
- *
- * Device ownership issues as mentioned for dma_map_single are the same
- * here.
- */
-int arm_dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
-		enum dma_data_direction dir, unsigned long attrs)
-{
-	const struct dma_map_ops *ops = get_dma_ops(dev);
-	struct scatterlist *s;
-	int i, j, ret;
-
-	for_each_sg(sg, s, nents, i) {
-#ifdef CONFIG_NEED_SG_DMA_LENGTH
-		s->dma_length = s->length;
-#endif
-		s->dma_address = ops->map_page(dev, sg_page(s), s->offset,
-						s->length, dir, attrs);
-		if (dma_mapping_error(dev, s->dma_address)) {
-			ret = -EIO;
-			goto bad_mapping;
-		}
-	}
-	return nents;
-
- bad_mapping:
-	for_each_sg(sg, s, i, j)
-		ops->unmap_page(dev, sg_dma_address(s), sg_dma_len(s), dir, attrs);
-	return ret;
-}
-
-/**
- * arm_dma_unmap_sg - unmap a set of SG buffers mapped by dma_map_sg
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @sg: list of buffers
- * @nents: number of buffers to unmap (same as was passed to dma_map_sg)
- * @dir: DMA transfer direction (same as was passed to dma_map_sg)
- *
- * Unmap a set of streaming mode DMA translations.  Again, CPU access
- * rules concerning calls here are the same as for dma_unmap_single().
- */
-void arm_dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nents,
-		enum dma_data_direction dir, unsigned long attrs)
-{
-	const struct dma_map_ops *ops = get_dma_ops(dev);
-	struct scatterlist *s;
-
-	int i;
-
-	for_each_sg(sg, s, nents, i)
-		ops->unmap_page(dev, sg_dma_address(s), sg_dma_len(s), dir, attrs);
-}
-
-/**
- * arm_dma_sync_sg_for_cpu
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @sg: list of buffers
- * @nents: number of buffers to map (returned from dma_map_sg)
- * @dir: DMA transfer direction (same as was passed to dma_map_sg)
- */
-void arm_dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
-			int nents, enum dma_data_direction dir)
-{
-	const struct dma_map_ops *ops = get_dma_ops(dev);
-	struct scatterlist *s;
-	int i;
-
-	for_each_sg(sg, s, nents, i)
-		ops->sync_single_for_cpu(dev, sg_dma_address(s), s->length,
-					 dir);
-}
-
-/**
- * arm_dma_sync_sg_for_device
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @sg: list of buffers
- * @nents: number of buffers to map (returned from dma_map_sg)
- * @dir: DMA transfer direction (same as was passed to dma_map_sg)
- */
-void arm_dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
-			int nents, enum dma_data_direction dir)
-{
-	const struct dma_map_ops *ops = get_dma_ops(dev);
-	struct scatterlist *s;
-	int i;
-
-	for_each_sg(sg, s, nents, i)
-		ops->sync_single_for_device(dev, sg_dma_address(s), s->length,
-					    dir);
-}
-
-static const struct dma_map_ops *arm_get_dma_map_ops(bool coherent)
-{
-	/*
-	 * When CONFIG_ARM_LPAE is set, physical address can extend above
-	 * 32-bits, which then can't be addressed by devices that only support
-	 * 32-bit DMA.
-	 * Use the generic dma-direct / swiotlb ops code in that case, as that
-	 * handles bounce buffering for us.
-	 */
-	if (IS_ENABLED(CONFIG_ARM_LPAE))
-		return NULL;
-	return coherent ? &arm_coherent_dma_ops : &arm_dma_ops;
-}
-
 #ifdef CONFIG_ARM_DMA_USE_IOMMU
 
 static int __dma_info_to_prot(enum dma_data_direction dir, unsigned long attrs)
@@ -1421,13 +1078,13 @@ static void __iommu_free_atomic(struct device *dev, void *cpu_addr,
 		__free_from_pool(cpu_addr, size);
 }
 
-static void *__arm_iommu_alloc_attrs(struct device *dev, size_t size,
-	    dma_addr_t *handle, gfp_t gfp, unsigned long attrs,
-	    int coherent_flag)
+static void *arm_iommu_alloc_attrs(struct device *dev, size_t size,
+	    dma_addr_t *handle, gfp_t gfp, unsigned long attrs)
 {
 	pgprot_t prot = __get_dma_pgprot(attrs, PAGE_KERNEL);
 	struct page **pages;
 	void *addr = NULL;
+	int coherent_flag = dev->dma_coherent ? COHERENT : NORMAL;
 
 	*handle = DMA_MAPPING_ERROR;
 	size = PAGE_ALIGN(size);
@@ -1470,19 +1127,7 @@ err_buffer:
 	return NULL;
 }
 
-static void *arm_iommu_alloc_attrs(struct device *dev, size_t size,
-	    dma_addr_t *handle, gfp_t gfp, unsigned long attrs)
-{
-	return __arm_iommu_alloc_attrs(dev, size, handle, gfp, attrs, NORMAL);
-}
-
-static void *arm_coherent_iommu_alloc_attrs(struct device *dev, size_t size,
-		    dma_addr_t *handle, gfp_t gfp, unsigned long attrs)
-{
-	return __arm_iommu_alloc_attrs(dev, size, handle, gfp, attrs, COHERENT);
-}
-
-static int __arm_iommu_mmap_attrs(struct device *dev, struct vm_area_struct *vma,
+static int arm_iommu_mmap_attrs(struct device *dev, struct vm_area_struct *vma,
 		    void *cpu_addr, dma_addr_t dma_addr, size_t size,
 		    unsigned long attrs)
 {
@@ -1496,35 +1141,24 @@ static int __arm_iommu_mmap_attrs(struct device *dev, struct vm_area_struct *vma
 	if (vma->vm_pgoff >= nr_pages)
 		return -ENXIO;
 
+	if (!dev->dma_coherent)
+		vma->vm_page_prot = __get_dma_pgprot(attrs, vma->vm_page_prot);
+
 	err = vm_map_pages(vma, pages, nr_pages);
 	if (err)
 		pr_err("Remapping memory failed: %d\n", err);
 
 	return err;
 }
-static int arm_iommu_mmap_attrs(struct device *dev,
-		struct vm_area_struct *vma, void *cpu_addr,
-		dma_addr_t dma_addr, size_t size, unsigned long attrs)
-{
-	vma->vm_page_prot = __get_dma_pgprot(attrs, vma->vm_page_prot);
-
-	return __arm_iommu_mmap_attrs(dev, vma, cpu_addr, dma_addr, size, attrs);
-}
-
-static int arm_coherent_iommu_mmap_attrs(struct device *dev,
-		struct vm_area_struct *vma, void *cpu_addr,
-		dma_addr_t dma_addr, size_t size, unsigned long attrs)
-{
-	return __arm_iommu_mmap_attrs(dev, vma, cpu_addr, dma_addr, size, attrs);
-}
 
 /*
  * free a page as defined by the above mapping.
  * Must not be called with IRQs disabled.
  */
-static void __arm_iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr,
-	dma_addr_t handle, unsigned long attrs, int coherent_flag)
+static void arm_iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr,
+	dma_addr_t handle, unsigned long attrs)
 {
+	int coherent_flag = dev->dma_coherent ? COHERENT : NORMAL;
 	struct page **pages;
 	size = PAGE_ALIGN(size);
 
@@ -1546,19 +1180,6 @@ static void __arm_iommu_free_attrs(struct device *dev, size_t size, void *cpu_ad
 	__iommu_free_buffer(dev, pages, size, attrs);
 }
 
-static void arm_iommu_free_attrs(struct device *dev, size_t size,
-				 void *cpu_addr, dma_addr_t handle,
-				 unsigned long attrs)
-{
-	__arm_iommu_free_attrs(dev, size, cpu_addr, handle, attrs, NORMAL);
-}
-
-static void arm_coherent_iommu_free_attrs(struct device *dev, size_t size,
-		    void *cpu_addr, dma_addr_t handle, unsigned long attrs)
-{
-	__arm_iommu_free_attrs(dev, size, cpu_addr, handle, attrs, COHERENT);
-}
-
 static int arm_iommu_get_sgtable(struct device *dev, struct sg_table *sgt,
 				 void *cpu_addr, dma_addr_t dma_addr,
 				 size_t size, unsigned long attrs)
@@ -1578,8 +1199,7 @@ static int arm_iommu_get_sgtable(struct device *dev, struct sg_table *sgt,
  */
 static int __map_sg_chunk(struct device *dev, struct scatterlist *sg,
 			  size_t size, dma_addr_t *handle,
-			  enum dma_data_direction dir, unsigned long attrs,
-			  bool is_coherent)
+			  enum dma_data_direction dir, unsigned long attrs)
 {
 	struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev);
 	dma_addr_t iova, iova_base;
@@ -1599,7 +1219,7 @@ static int __map_sg_chunk(struct device *dev, struct scatterlist *sg,
 		phys_addr_t phys = page_to_phys(sg_page(s));
 		unsigned int len = PAGE_ALIGN(s->offset + s->length);
 
-		if (!is_coherent && (attrs & DMA_ATTR_SKIP_CPU_SYNC) == 0)
+		if (!dev->dma_coherent && !(attrs & DMA_ATTR_SKIP_CPU_SYNC))
 			__dma_page_cpu_to_dev(sg_page(s), s->offset, s->length, dir);
 
 		prot = __dma_info_to_prot(dir, attrs);
@@ -1619,9 +1239,20 @@ fail:
 	return ret;
 }
 
-static int __iommu_map_sg(struct device *dev, struct scatterlist *sg, int nents,
-		     enum dma_data_direction dir, unsigned long attrs,
-		     bool is_coherent)
+/**
+ * arm_iommu_map_sg - map a set of SG buffers for streaming mode DMA
+ * @dev: valid struct device pointer
+ * @sg: list of buffers
+ * @nents: number of buffers to map
+ * @dir: DMA transfer direction
+ *
+ * Map a set of buffers described by scatterlist in streaming mode for DMA.
+ * The scatter gather list elements are merged together (if possible) and
+ * tagged with the appropriate dma address and length. They are obtained via
+ * sg_dma_{address,length}.
+ */
+static int arm_iommu_map_sg(struct device *dev, struct scatterlist *sg,
+		int nents, enum dma_data_direction dir, unsigned long attrs)
 {
 	struct scatterlist *s = sg, *dma = sg, *start = sg;
 	int i, count = 0, ret;
@@ -1636,8 +1267,7 @@ static int __iommu_map_sg(struct device *dev, struct scatterlist *sg, int nents,
 
 		if (s->offset || (size & ~PAGE_MASK) || size + s->length > max) {
 			ret = __map_sg_chunk(dev, start, size,
-					     &dma->dma_address, dir, attrs,
-					     is_coherent);
+					     &dma->dma_address, dir, attrs);
 			if (ret < 0)
 				goto bad_mapping;
 
@@ -1651,8 +1281,7 @@ static int __iommu_map_sg(struct device *dev, struct scatterlist *sg, int nents,
 		}
 		size += s->length;
 	}
-	ret = __map_sg_chunk(dev, start, size, &dma->dma_address, dir, attrs,
-			     is_coherent);
+	ret = __map_sg_chunk(dev, start, size, &dma->dma_address, dir, attrs);
 	if (ret < 0)
 		goto bad_mapping;
 
@@ -1670,44 +1299,19 @@ bad_mapping:
 }
 
 /**
- * arm_coherent_iommu_map_sg - map a set of SG buffers for streaming mode DMA
- * @dev: valid struct device pointer
- * @sg: list of buffers
- * @nents: number of buffers to map
- * @dir: DMA transfer direction
- *
- * Map a set of i/o coherent buffers described by scatterlist in streaming
- * mode for DMA. The scatter gather list elements are merged together (if
- * possible) and tagged with the appropriate dma address and length. They are
- * obtained via sg_dma_{address,length}.
- */
-static int arm_coherent_iommu_map_sg(struct device *dev, struct scatterlist *sg,
-		int nents, enum dma_data_direction dir, unsigned long attrs)
-{
-	return __iommu_map_sg(dev, sg, nents, dir, attrs, true);
-}
-
-/**
- * arm_iommu_map_sg - map a set of SG buffers for streaming mode DMA
+ * arm_iommu_unmap_sg - unmap a set of SG buffers mapped by dma_map_sg
  * @dev: valid struct device pointer
  * @sg: list of buffers
- * @nents: number of buffers to map
- * @dir: DMA transfer direction
+ * @nents: number of buffers to unmap (same as was passed to dma_map_sg)
+ * @dir: DMA transfer direction (same as was passed to dma_map_sg)
  *
- * Map a set of buffers described by scatterlist in streaming mode for DMA.
- * The scatter gather list elements are merged together (if possible) and
- * tagged with the appropriate dma address and length. They are obtained via
- * sg_dma_{address,length}.
+ * Unmap a set of streaming mode DMA translations.  Again, CPU access
+ * rules concerning calls here are the same as for dma_unmap_single().
  */
-static int arm_iommu_map_sg(struct device *dev, struct scatterlist *sg,
-		int nents, enum dma_data_direction dir, unsigned long attrs)
-{
-	return __iommu_map_sg(dev, sg, nents, dir, attrs, false);
-}
-
-static void __iommu_unmap_sg(struct device *dev, struct scatterlist *sg,
-		int nents, enum dma_data_direction dir,
-		unsigned long attrs, bool is_coherent)
+static void arm_iommu_unmap_sg(struct device *dev,
+			       struct scatterlist *sg, int nents,
+			       enum dma_data_direction dir,
+			       unsigned long attrs)
 {
 	struct scatterlist *s;
 	int i;
@@ -1716,48 +1320,13 @@ static void __iommu_unmap_sg(struct device *dev, struct scatterlist *sg,
 		if (sg_dma_len(s))
 			__iommu_remove_mapping(dev, sg_dma_address(s),
 					       sg_dma_len(s));
-		if (!is_coherent && (attrs & DMA_ATTR_SKIP_CPU_SYNC) == 0)
+		if (!dev->dma_coherent && !(attrs & DMA_ATTR_SKIP_CPU_SYNC))
 			__dma_page_dev_to_cpu(sg_page(s), s->offset,
 					      s->length, dir);
 	}
 }
 
 /**
- * arm_coherent_iommu_unmap_sg - unmap a set of SG buffers mapped by dma_map_sg
- * @dev: valid struct device pointer
- * @sg: list of buffers
- * @nents: number of buffers to unmap (same as was passed to dma_map_sg)
- * @dir: DMA transfer direction (same as was passed to dma_map_sg)
- *
- * Unmap a set of streaming mode DMA translations.  Again, CPU access
- * rules concerning calls here are the same as for dma_unmap_single().
- */
-static void arm_coherent_iommu_unmap_sg(struct device *dev,
-		struct scatterlist *sg, int nents, enum dma_data_direction dir,
-		unsigned long attrs)
-{
-	__iommu_unmap_sg(dev, sg, nents, dir, attrs, true);
-}
-
-/**
- * arm_iommu_unmap_sg - unmap a set of SG buffers mapped by dma_map_sg
- * @dev: valid struct device pointer
- * @sg: list of buffers
- * @nents: number of buffers to unmap (same as was passed to dma_map_sg)
- * @dir: DMA transfer direction (same as was passed to dma_map_sg)
- *
- * Unmap a set of streaming mode DMA translations.  Again, CPU access
- * rules concerning calls here are the same as for dma_unmap_single().
- */
-static void arm_iommu_unmap_sg(struct device *dev,
-			       struct scatterlist *sg, int nents,
-			       enum dma_data_direction dir,
-			       unsigned long attrs)
-{
-	__iommu_unmap_sg(dev, sg, nents, dir, attrs, false);
-}
-
-/**
  * arm_iommu_sync_sg_for_cpu
  * @dev: valid struct device pointer
  * @sg: list of buffers
@@ -1771,6 +1340,9 @@ static void arm_iommu_sync_sg_for_cpu(struct device *dev,
 	struct scatterlist *s;
 	int i;
 
+	if (dev->dma_coherent)
+		return;
+
 	for_each_sg(sg, s, nents, i)
 		__dma_page_dev_to_cpu(sg_page(s), s->offset, s->length, dir);
 
@@ -1790,22 +1362,24 @@ static void arm_iommu_sync_sg_for_device(struct device *dev,
 	struct scatterlist *s;
 	int i;
 
+	if (dev->dma_coherent)
+		return;
+
 	for_each_sg(sg, s, nents, i)
 		__dma_page_cpu_to_dev(sg_page(s), s->offset, s->length, dir);
 }
 
-
 /**
- * arm_coherent_iommu_map_page
+ * arm_iommu_map_page
  * @dev: valid struct device pointer
  * @page: page that buffer resides in
  * @offset: offset into page for start of buffer
  * @size: size of buffer to map
  * @dir: DMA transfer direction
  *
- * Coherent IOMMU aware version of arm_dma_map_page()
+ * IOMMU aware version of arm_dma_map_page()
  */
-static dma_addr_t arm_coherent_iommu_map_page(struct device *dev, struct page *page,
+static dma_addr_t arm_iommu_map_page(struct device *dev, struct page *page,
 	     unsigned long offset, size_t size, enum dma_data_direction dir,
 	     unsigned long attrs)
 {
@@ -1813,6 +1387,9 @@ static dma_addr_t arm_coherent_iommu_map_page(struct device *dev, struct page *p
 	dma_addr_t dma_addr;
 	int ret, prot, len = PAGE_ALIGN(size + offset);
 
+	if (!dev->dma_coherent && !(attrs & DMA_ATTR_SKIP_CPU_SYNC))
+		__dma_page_cpu_to_dev(page, offset, size, dir);
+
 	dma_addr = __alloc_iova(mapping, len);
 	if (dma_addr == DMA_MAPPING_ERROR)
 		return dma_addr;
@@ -1830,50 +1407,6 @@ fail:
 }
 
 /**
- * arm_iommu_map_page
- * @dev: valid struct device pointer
- * @page: page that buffer resides in
- * @offset: offset into page for start of buffer
- * @size: size of buffer to map
- * @dir: DMA transfer direction
- *
- * IOMMU aware version of arm_dma_map_page()
- */
-static dma_addr_t arm_iommu_map_page(struct device *dev, struct page *page,
-	     unsigned long offset, size_t size, enum dma_data_direction dir,
-	     unsigned long attrs)
-{
-	if ((attrs & DMA_ATTR_SKIP_CPU_SYNC) == 0)
-		__dma_page_cpu_to_dev(page, offset, size, dir);
-
-	return arm_coherent_iommu_map_page(dev, page, offset, size, dir, attrs);
-}
-
-/**
- * arm_coherent_iommu_unmap_page
- * @dev: valid struct device pointer
- * @handle: DMA address of buffer
- * @size: size of buffer (same as passed to dma_map_page)
- * @dir: DMA transfer direction (same as passed to dma_map_page)
- *
- * Coherent IOMMU aware version of arm_dma_unmap_page()
- */
-static void arm_coherent_iommu_unmap_page(struct device *dev, dma_addr_t handle,
-		size_t size, enum dma_data_direction dir, unsigned long attrs)
-{
-	struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev);
-	dma_addr_t iova = handle & PAGE_MASK;
-	int offset = handle & ~PAGE_MASK;
-	int len = PAGE_ALIGN(size + offset);
-
-	if (!iova)
-		return;
-
-	iommu_unmap(mapping->domain, iova, len);
-	__free_iova(mapping, iova, len);
-}
-
-/**
  * arm_iommu_unmap_page
  * @dev: valid struct device pointer
  * @handle: DMA address of buffer
@@ -1887,15 +1420,17 @@ static void arm_iommu_unmap_page(struct device *dev, dma_addr_t handle,
 {
 	struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev);
 	dma_addr_t iova = handle & PAGE_MASK;
-	struct page *page = phys_to_page(iommu_iova_to_phys(mapping->domain, iova));
+	struct page *page;
 	int offset = handle & ~PAGE_MASK;
 	int len = PAGE_ALIGN(size + offset);
 
 	if (!iova)
 		return;
 
-	if ((attrs & DMA_ATTR_SKIP_CPU_SYNC) == 0)
+	if (!dev->dma_coherent && !(attrs & DMA_ATTR_SKIP_CPU_SYNC)) {
+		page = phys_to_page(iommu_iova_to_phys(mapping->domain, iova));
 		__dma_page_dev_to_cpu(page, offset, size, dir);
+	}
 
 	iommu_unmap(mapping->domain, iova, len);
 	__free_iova(mapping, iova, len);
@@ -1963,12 +1498,13 @@ static void arm_iommu_sync_single_for_cpu(struct device *dev,
 {
 	struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev);
 	dma_addr_t iova = handle & PAGE_MASK;
-	struct page *page = phys_to_page(iommu_iova_to_phys(mapping->domain, iova));
+	struct page *page;
 	unsigned int offset = handle & ~PAGE_MASK;
 
-	if (!iova)
+	if (dev->dma_coherent || !iova)
 		return;
 
+	page = phys_to_page(iommu_iova_to_phys(mapping->domain, iova));
 	__dma_page_dev_to_cpu(page, offset, size, dir);
 }
 
@@ -1977,12 +1513,13 @@ static void arm_iommu_sync_single_for_device(struct device *dev,
 {
 	struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev);
 	dma_addr_t iova = handle & PAGE_MASK;
-	struct page *page = phys_to_page(iommu_iova_to_phys(mapping->domain, iova));
+	struct page *page;
 	unsigned int offset = handle & ~PAGE_MASK;
 
-	if (!iova)
+	if (dev->dma_coherent || !iova)
 		return;
 
+	page = phys_to_page(iommu_iova_to_phys(mapping->domain, iova));
 	__dma_page_cpu_to_dev(page, offset, size, dir);
 }
 
@@ -2004,26 +1541,6 @@ static const struct dma_map_ops iommu_ops = {
 
 	.map_resource		= arm_iommu_map_resource,
 	.unmap_resource		= arm_iommu_unmap_resource,
-
-	.dma_supported		= arm_dma_supported,
-};
-
-static const struct dma_map_ops iommu_coherent_ops = {
-	.alloc		= arm_coherent_iommu_alloc_attrs,
-	.free		= arm_coherent_iommu_free_attrs,
-	.mmap		= arm_coherent_iommu_mmap_attrs,
-	.get_sgtable	= arm_iommu_get_sgtable,
-
-	.map_page	= arm_coherent_iommu_map_page,
-	.unmap_page	= arm_coherent_iommu_unmap_page,
-
-	.map_sg		= arm_coherent_iommu_map_sg,
-	.unmap_sg	= arm_coherent_iommu_unmap_sg,
-
-	.map_resource	= arm_iommu_map_resource,
-	.unmap_resource	= arm_iommu_unmap_resource,
-
-	.dma_supported		= arm_dma_supported,
 };
 
 /**
@@ -2199,40 +1716,32 @@ void arm_iommu_detach_device(struct device *dev)
 	iommu_detach_device(mapping->domain, dev);
 	kref_put(&mapping->kref, release_iommu_mapping);
 	to_dma_iommu_mapping(dev) = NULL;
-	set_dma_ops(dev, arm_get_dma_map_ops(dev->archdata.dma_coherent));
+	set_dma_ops(dev, NULL);
 
 	pr_debug("Detached IOMMU controller from %s device.\n", dev_name(dev));
 }
 EXPORT_SYMBOL_GPL(arm_iommu_detach_device);
 
-static const struct dma_map_ops *arm_get_iommu_dma_map_ops(bool coherent)
-{
-	return coherent ? &iommu_coherent_ops : &iommu_ops;
-}
-
-static bool arm_setup_iommu_dma_ops(struct device *dev, u64 dma_base, u64 size,
-				    const struct iommu_ops *iommu)
+static void arm_setup_iommu_dma_ops(struct device *dev, u64 dma_base, u64 size,
+				    const struct iommu_ops *iommu, bool coherent)
 {
 	struct dma_iommu_mapping *mapping;
 
-	if (!iommu)
-		return false;
-
 	mapping = arm_iommu_create_mapping(dev->bus, dma_base, size);
 	if (IS_ERR(mapping)) {
 		pr_warn("Failed to create %llu-byte IOMMU mapping for device %s\n",
 				size, dev_name(dev));
-		return false;
+		return;
 	}
 
 	if (__arm_iommu_attach_device(dev, mapping)) {
 		pr_warn("Failed to attached device %s to IOMMU_mapping\n",
 				dev_name(dev));
 		arm_iommu_release_mapping(mapping);
-		return false;
+		return;
 	}
 
-	return true;
+	set_dma_ops(dev, &iommu_ops);
 }
 
 static void arm_teardown_iommu_dma_ops(struct device *dev)
@@ -2248,27 +1757,26 @@ static void arm_teardown_iommu_dma_ops(struct device *dev)
 
 #else
 
-static bool arm_setup_iommu_dma_ops(struct device *dev, u64 dma_base, u64 size,
-				    const struct iommu_ops *iommu)
+static void arm_setup_iommu_dma_ops(struct device *dev, u64 dma_base, u64 size,
+				    const struct iommu_ops *iommu, bool coherent)
 {
-	return false;
 }
 
 static void arm_teardown_iommu_dma_ops(struct device *dev) { }
 
-#define arm_get_iommu_dma_map_ops arm_get_dma_map_ops
-
 #endif	/* CONFIG_ARM_DMA_USE_IOMMU */
 
 void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
 			const struct iommu_ops *iommu, bool coherent)
 {
-	const struct dma_map_ops *dma_ops;
-
-	dev->archdata.dma_coherent = coherent;
-#ifdef CONFIG_SWIOTLB
-	dev->dma_coherent = coherent;
-#endif
+	/*
+	 * Due to legacy code that sets the ->dma_coherent flag from a bus
+	 * notifier we can't just assign coherent to the ->dma_coherent flag
+	 * here, but instead have to make sure we only set but never clear it
+	 * for now.
+	 */
+	if (coherent)
+		dev->dma_coherent = true;
 
 	/*
 	 * Don't override the dma_ops if they have already been set. Ideally
@@ -2278,17 +1786,10 @@ void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
 	if (dev->dma_ops)
 		return;
 
-	if (arm_setup_iommu_dma_ops(dev, dma_base, size, iommu))
-		dma_ops = arm_get_iommu_dma_map_ops(coherent);
-	else
-		dma_ops = arm_get_dma_map_ops(coherent);
+	if (iommu)
+		arm_setup_iommu_dma_ops(dev, dma_base, size, iommu, coherent);
 
-	set_dma_ops(dev, dma_ops);
-
-#ifdef CONFIG_XEN
-	if (xen_initial_domain())
-		dev->dma_ops = &xen_swiotlb_dma_ops;
-#endif
+	xen_setup_dma_ops(dev);
 	dev->archdata.dma_ops_setup = true;
 }
 
@@ -2302,7 +1803,6 @@ void arch_teardown_dma_ops(struct device *dev)
 	set_dma_ops(dev, NULL);
 }
 
-#ifdef CONFIG_SWIOTLB
 void arch_sync_dma_for_device(phys_addr_t paddr, size_t size,
 		enum dma_data_direction dir)
 {
@@ -2330,4 +1830,3 @@ void arch_dma_free(struct device *dev, size_t size, void *cpu_addr,
 {
 	__arm_dma_free(dev, size, cpu_addr, dma_handle, attrs, false);
 }
-#endif /* CONFIG_SWIOTLB */
diff --git a/arch/arm/mm/dump.c b/arch/arm/mm/dump.c
index fb688003d156..059eb4cdc9c2 100644
--- a/arch/arm/mm/dump.c
+++ b/arch/arm/mm/dump.c
@@ -26,7 +26,7 @@ static struct addr_marker address_markers[] = {
 	{ MODULES_VADDR,	"Modules" },
 	{ PAGE_OFFSET,		"Kernel Mapping" },
 	{ 0,			"vmalloc() Area" },
-	{ VMALLOC_END,		"vmalloc() End" },
+	{ FDT_FIXED_BASE,	"FDT Area" },
 	{ FIXADDR_START,	"Fixmap Area" },
 	{ VECTORS_BASE,	"Vectors" },
 	{ VECTORS_BASE + PAGE_SIZE * 2, "Vectors End" },
@@ -200,6 +200,7 @@ static const struct prot_bits section_bits[] = {
 };
 
 struct pg_level {
+	const char *name;
 	const struct prot_bits *bits;
 	size_t num;
 	u64 mask;
@@ -213,9 +214,11 @@ static struct pg_level pg_level[] = {
 	}, { /* p4d */
 	}, { /* pud */
 	}, { /* pmd */
+		.name	= (CONFIG_PGTABLE_LEVELS > 2) ? "PMD" : "PGD",
 		.bits	= section_bits,
 		.num	= ARRAY_SIZE(section_bits),
 	}, { /* pte */
+		.name	= "PTE",
 		.bits	= pte_bits,
 		.num	= ARRAY_SIZE(pte_bits),
 	},
@@ -282,7 +285,8 @@ static void note_page(struct pg_state *st, unsigned long addr,
 				delta >>= 10;
 				unit++;
 			}
-			pt_dump_seq_printf(st->seq, "%9lu%c", delta, *unit);
+			pt_dump_seq_printf(st->seq, "%9lu%c %s", delta, *unit,
+					   pg_level[st->level].name);
 			if (st->current_domain)
 				pt_dump_seq_printf(st->seq, " %s",
 							st->current_domain);
@@ -346,7 +350,7 @@ static void walk_pmd(struct pg_state *st, pud_t *pud, unsigned long start)
 		addr = start + i * PMD_SIZE;
 		domain = get_domain_name(pmd);
 		if (pmd_none(*pmd) || pmd_large(*pmd) || !pmd_present(*pmd))
-			note_page(st, addr, 3, pmd_val(*pmd), domain);
+			note_page(st, addr, 4, pmd_val(*pmd), domain);
 		else
 			walk_pte(st, pmd, addr, domain);
 
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index a062e07516dd..de988cba9a4b 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -105,6 +105,19 @@ static inline bool is_write_fault(unsigned int fsr)
 	return (fsr & FSR_WRITE) && !(fsr & FSR_CM);
 }
 
+static inline bool is_translation_fault(unsigned int fsr)
+{
+	int fs = fsr_fs(fsr);
+#ifdef CONFIG_ARM_LPAE
+	if ((fs & FS_MMU_NOLL_MASK) == FS_TRANS_NOLL)
+		return true;
+#else
+	if (fs == FS_L1_TRANS || fs == FS_L2_TRANS)
+		return true;
+#endif
+	return false;
+}
+
 static void die_kernel_fault(const char *msg, struct mm_struct *mm,
 			     unsigned long addr, unsigned int fsr,
 			     struct pt_regs *regs)
@@ -140,7 +153,8 @@ __do_kernel_fault(struct mm_struct *mm, unsigned long addr, unsigned int fsr,
 	if (addr < PAGE_SIZE) {
 		msg = "NULL pointer dereference";
 	} else {
-		if (kfence_handle_page_fault(addr, is_write_fault(fsr), regs))
+		if (is_translation_fault(fsr) &&
+		    kfence_handle_page_fault(addr, is_write_fault(fsr), regs))
 			return;
 
 		msg = "paging request";
@@ -208,7 +222,7 @@ static inline bool is_permission_fault(unsigned int fsr)
 {
 	int fs = fsr_fs(fsr);
 #ifdef CONFIG_ARM_LPAE
-	if ((fs & FS_PERM_NOLL_MASK) == FS_PERM_NOLL)
+	if ((fs & FS_MMU_NOLL_MASK) == FS_PERM_NOLL)
 		return true;
 #else
 	if (fs == FS_L1_PERM || fs == FS_L2_PERM)
@@ -322,6 +336,10 @@ retry:
 		return 0;
 	}
 
+	/* The fault is fully completed (including releasing mmap lock) */
+	if (fault & VM_FAULT_COMPLETED)
+		return 0;
+
 	if (!(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_RETRY) {
 			flags |= FAULT_FLAG_TRIED;
diff --git a/arch/arm/mm/fault.h b/arch/arm/mm/fault.h
index 83b5ab32d7a4..54927ba1fa6e 100644
--- a/arch/arm/mm/fault.h
+++ b/arch/arm/mm/fault.h
@@ -14,8 +14,9 @@
 
 #ifdef CONFIG_ARM_LPAE
 #define FSR_FS_AEA		17
+#define FS_TRANS_NOLL		0x4
 #define FS_PERM_NOLL		0xC
-#define FS_PERM_NOLL_MASK	0x3C
+#define FS_MMU_NOLL_MASK	0x3C
 
 static inline int fsr_fs(unsigned int fsr)
 {
@@ -23,8 +24,10 @@ static inline int fsr_fs(unsigned int fsr)
 }
 #else
 #define FSR_FS_AEA		22
-#define FS_L1_PERM             0xD
-#define FS_L2_PERM             0xF
+#define FS_L1_TRANS		0x5
+#define FS_L2_TRANS		0x7
+#define FS_L1_PERM		0xD
+#define FS_L2_PERM		0xF
 
 static inline int fsr_fs(unsigned int fsr)
 {
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 6d0cb0f7bc54..ce64bdb55a16 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -164,47 +164,6 @@ phys_addr_t __init arm_memblock_steal(phys_addr_t size, phys_addr_t align)
 	return phys;
 }
 
-static void __init arm_initrd_init(void)
-{
-#ifdef CONFIG_BLK_DEV_INITRD
-	phys_addr_t start;
-	unsigned long size;
-
-	initrd_start = initrd_end = 0;
-
-	if (!phys_initrd_size)
-		return;
-
-	/*
-	 * Round the memory region to page boundaries as per free_initrd_mem()
-	 * This allows us to detect whether the pages overlapping the initrd
-	 * are in use, but more importantly, reserves the entire set of pages
-	 * as we don't want these pages allocated for other purposes.
-	 */
-	start = round_down(phys_initrd_start, PAGE_SIZE);
-	size = phys_initrd_size + (phys_initrd_start - start);
-	size = round_up(size, PAGE_SIZE);
-
-	if (!memblock_is_region_memory(start, size)) {
-		pr_err("INITRD: 0x%08llx+0x%08lx is not a memory region - disabling initrd\n",
-		       (u64)start, size);
-		return;
-	}
-
-	if (memblock_is_region_reserved(start, size)) {
-		pr_err("INITRD: 0x%08llx+0x%08lx overlaps in-use memory region - disabling initrd\n",
-		       (u64)start, size);
-		return;
-	}
-
-	memblock_reserve(start, size);
-
-	/* Now convert initrd to virtual addresses */
-	initrd_start = __phys_to_virt(phys_initrd_start);
-	initrd_end = initrd_start + phys_initrd_size;
-#endif
-}
-
 #ifdef CONFIG_CPU_ICACHE_MISMATCH_WORKAROUND
 void check_cpu_icache_size(int cpuid)
 {
@@ -226,7 +185,7 @@ void __init arm_memblock_init(const struct machine_desc *mdesc)
 	/* Register the kernel text, kernel data and initrd with memblock. */
 	memblock_reserve(__pa(KERNEL_START), KERNEL_END - KERNEL_START);
 
-	arm_initrd_init();
+	reserve_initrd_mem();
 
 	arm_mm_memblock_reserve();
 
@@ -312,11 +271,7 @@ static void __init free_highpages(void)
 void __init mem_init(void)
 {
 #ifdef CONFIG_ARM_LPAE
-	if (swiotlb_force == SWIOTLB_FORCE ||
-	    max_pfn > arm_dma_pfn_limit)
-		swiotlb_init(1);
-	else
-		swiotlb_force = SWIOTLB_NO_FORCE;
+	swiotlb_init(max_pfn > arm_dma_pfn_limit, SWIOTLB_VERBOSE);
 #endif
 
 	set_max_mapnr(pfn_to_page(max_pfn) - mem_map);
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 197f8eb3a775..2129070065c3 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -117,16 +117,21 @@ EXPORT_SYMBOL(ioremap_page);
 
 void __check_vmalloc_seq(struct mm_struct *mm)
 {
-	unsigned int seq;
+	int seq;
 
 	do {
-		seq = init_mm.context.vmalloc_seq;
+		seq = atomic_read(&init_mm.context.vmalloc_seq);
 		memcpy(pgd_offset(mm, VMALLOC_START),
 		       pgd_offset_k(VMALLOC_START),
 		       sizeof(pgd_t) * (pgd_index(VMALLOC_END) -
 					pgd_index(VMALLOC_START)));
-		mm->context.vmalloc_seq = seq;
-	} while (seq != init_mm.context.vmalloc_seq);
+		/*
+		 * Use a store-release so that other CPUs that observe the
+		 * counter's new value are guaranteed to see the results of the
+		 * memcpy as well.
+		 */
+		atomic_set_release(&mm->context.vmalloc_seq, seq);
+	} while (seq != atomic_read(&init_mm.context.vmalloc_seq));
 }
 
 #if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE)
@@ -157,7 +162,7 @@ static void unmap_area_sections(unsigned long virt, unsigned long size)
 			 * Note: this is still racy on SMP machines.
 			 */
 			pmd_clear(pmdp);
-			init_mm.context.vmalloc_seq++;
+			atomic_inc_return_release(&init_mm.context.vmalloc_seq);
 
 			/*
 			 * Free the page table, if there was one.
@@ -174,8 +179,7 @@ static void unmap_area_sections(unsigned long virt, unsigned long size)
 	 * Ensure that the active_mm is up to date - we want to
 	 * catch any use-after-iounmap cases.
 	 */
-	if (current->active_mm->context.vmalloc_seq != init_mm.context.vmalloc_seq)
-		__check_vmalloc_seq(current->active_mm);
+	check_vmalloc_seq(current->active_mm);
 
 	flush_tlb_kernel_range(virt, end);
 }
@@ -414,7 +418,7 @@ void *arch_memremap_wb(phys_addr_t phys_addr, size_t size)
 						   __builtin_return_address(0));
 }
 
-void __iounmap(volatile void __iomem *io_addr)
+void iounmap(volatile void __iomem *io_addr)
 {
 	void *addr = (void *)(PAGE_MASK & (unsigned long)io_addr);
 	struct static_vm *svm;
@@ -442,16 +446,9 @@ void __iounmap(volatile void __iomem *io_addr)
 
 	vunmap(addr);
 }
-
-void (*arch_iounmap)(volatile void __iomem *) = __iounmap;
-
-void iounmap(volatile void __iomem *cookie)
-{
-	arch_iounmap(cookie);
-}
 EXPORT_SYMBOL(iounmap);
 
-#ifdef CONFIG_PCI
+#if defined(CONFIG_PCI) || IS_ENABLED(CONFIG_PCMCIA)
 static int pci_ioremap_mem_type = MT_DEVICE;
 
 void pci_ioremap_set_mem_type(int mem_type)
@@ -489,3 +486,11 @@ void __init early_ioremap_init(void)
 {
 	early_ioremap_setup();
 }
+
+bool arch_memremap_can_ram_remap(resource_size_t offset, size_t size,
+				 unsigned long flags)
+{
+	unsigned long pfn = PHYS_PFN(offset);
+
+	return memblock_is_map_memory(pfn);
+}
diff --git a/arch/arm/mm/kasan_init.c b/arch/arm/mm/kasan_init.c
index 5ad0d6c56d56..46d9f4a622cb 100644
--- a/arch/arm/mm/kasan_init.c
+++ b/arch/arm/mm/kasan_init.c
@@ -236,7 +236,11 @@ void __init kasan_init(void)
 
 	clear_pgds(KASAN_SHADOW_START, KASAN_SHADOW_END);
 
-	kasan_populate_early_shadow(kasan_mem_to_shadow((void *)VMALLOC_START),
+	if (!IS_ENABLED(CONFIG_KASAN_VMALLOC))
+		kasan_populate_early_shadow(kasan_mem_to_shadow((void *)VMALLOC_START),
+					    kasan_mem_to_shadow((void *)VMALLOC_END));
+
+	kasan_populate_early_shadow(kasan_mem_to_shadow((void *)VMALLOC_END),
 				    kasan_mem_to_shadow((void *)-1UL) + 1);
 
 	for_each_mem_range(i, &pa_start, &pa_end) {
@@ -264,12 +268,17 @@ void __init kasan_init(void)
 
 	/*
 	 * 1. The module global variables are in MODULES_VADDR ~ MODULES_END,
-	 *    so we need to map this area.
+	 *    so we need to map this area if CONFIG_KASAN_VMALLOC=n. With
+	 *    VMALLOC support KASAN will manage this region dynamically,
+	 *    refer to kasan_populate_vmalloc() and ARM's implementation of
+	 *    module_alloc().
 	 * 2. PKMAP_BASE ~ PKMAP_BASE+PMD_SIZE's shadow and MODULES_VADDR
 	 *    ~ MODULES_END's shadow is in the same PMD_SIZE, so we can't
 	 *    use kasan_populate_zero_shadow.
 	 */
-	create_mapping((void *)MODULES_VADDR, (void *)(PKMAP_BASE + PMD_SIZE));
+	if (!IS_ENABLED(CONFIG_KASAN_VMALLOC) && IS_ENABLED(CONFIG_MODULES))
+		create_mapping((void *)MODULES_VADDR, (void *)(MODULES_END));
+	create_mapping((void *)PKMAP_BASE, (void *)(PKMAP_BASE + PMD_SIZE));
 
 	/*
 	 * KAsan may reuse the contents of kasan_early_shadow_pte directly, so
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index 9ff683612f2a..d7ffccb7fea7 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -88,6 +88,10 @@ extern phys_addr_t arm_lowmem_limit;
 
 void __init bootmem_init(void);
 void arm_mm_memblock_reserve(void);
+#ifdef CONFIG_CMA_AREAS
 void dma_contiguous_remap(void);
+#else
+static inline void dma_contiguous_remap(void) { }
+#endif
 
 unsigned long __clear_cr(unsigned long mask);
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 274e4f73fd33..463fc2a8448f 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -212,12 +212,14 @@ early_param("ecc", early_ecc);
 static int __init early_cachepolicy(char *p)
 {
 	pr_warn("cachepolicy kernel parameter not supported without cp15\n");
+	return 0;
 }
 early_param("cachepolicy", early_cachepolicy);
 
 static int __init noalign_setup(char *__unused)
 {
 	pr_warn("noalign kernel parameter not supported without cp15\n");
+	return 1;
 }
 __setup("noalign", noalign_setup);
 
@@ -294,6 +296,17 @@ static struct mem_type mem_types[] __ro_after_init = {
 		.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
 		.domain    = DOMAIN_KERNEL,
 	},
+	[MT_MEMORY_RO] = {
+		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+			     L_PTE_XN | L_PTE_RDONLY,
+		.prot_l1   = PMD_TYPE_TABLE,
+#ifdef CONFIG_ARM_LPAE
+		.prot_sect = PMD_TYPE_SECT | L_PMD_SECT_RDONLY | PMD_SECT_AP2,
+#else
+		.prot_sect = PMD_TYPE_SECT,
+#endif
+		.domain    = DOMAIN_KERNEL,
+	},
 	[MT_ROM] = {
 		.prot_sect = PMD_TYPE_SECT,
 		.domain    = DOMAIN_KERNEL,
@@ -403,6 +416,26 @@ void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys, pgprot_t prot)
 	local_flush_tlb_kernel_range(vaddr, vaddr + PAGE_SIZE);
 }
 
+static pgprot_t protection_map[16] __ro_after_init = {
+	[VM_NONE]					= __PAGE_NONE,
+	[VM_READ]					= __PAGE_READONLY,
+	[VM_WRITE]					= __PAGE_COPY,
+	[VM_WRITE | VM_READ]				= __PAGE_COPY,
+	[VM_EXEC]					= __PAGE_READONLY_EXEC,
+	[VM_EXEC | VM_READ]				= __PAGE_READONLY_EXEC,
+	[VM_EXEC | VM_WRITE]				= __PAGE_COPY_EXEC,
+	[VM_EXEC | VM_WRITE | VM_READ]			= __PAGE_COPY_EXEC,
+	[VM_SHARED]					= __PAGE_NONE,
+	[VM_SHARED | VM_READ]				= __PAGE_READONLY,
+	[VM_SHARED | VM_WRITE]				= __PAGE_SHARED,
+	[VM_SHARED | VM_WRITE | VM_READ]		= __PAGE_SHARED,
+	[VM_SHARED | VM_EXEC]				= __PAGE_READONLY_EXEC,
+	[VM_SHARED | VM_EXEC | VM_READ]			= __PAGE_READONLY_EXEC,
+	[VM_SHARED | VM_EXEC | VM_WRITE]		= __PAGE_SHARED_EXEC,
+	[VM_SHARED | VM_EXEC | VM_WRITE | VM_READ]	= __PAGE_SHARED_EXEC
+};
+DECLARE_VM_GET_PAGE_PROT
+
 /*
  * Adjust the PMD section entries according to the CPU in use.
  */
@@ -487,6 +520,7 @@ static void __init build_mem_type_table(void)
 
 			/* Also setup NX memory mapping */
 			mem_types[MT_MEMORY_RW].prot_sect |= PMD_SECT_XN;
+			mem_types[MT_MEMORY_RO].prot_sect |= PMD_SECT_XN;
 		}
 		if (cpu_arch >= CPU_ARCH_ARMv7 && (cr & CR_TRE)) {
 			/*
@@ -566,6 +600,7 @@ static void __init build_mem_type_table(void)
 		mem_types[MT_ROM].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 		mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 		mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
+		mem_types[MT_MEMORY_RO].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 #endif
 
 		/*
@@ -585,6 +620,8 @@ static void __init build_mem_type_table(void)
 			mem_types[MT_MEMORY_RWX].prot_pte |= L_PTE_SHARED;
 			mem_types[MT_MEMORY_RW].prot_sect |= PMD_SECT_S;
 			mem_types[MT_MEMORY_RW].prot_pte |= L_PTE_SHARED;
+			mem_types[MT_MEMORY_RO].prot_sect |= PMD_SECT_S;
+			mem_types[MT_MEMORY_RO].prot_pte |= L_PTE_SHARED;
 			mem_types[MT_MEMORY_DMA_READY].prot_pte |= L_PTE_SHARED;
 			mem_types[MT_MEMORY_RWX_NONCACHED].prot_sect |= PMD_SECT_S;
 			mem_types[MT_MEMORY_RWX_NONCACHED].prot_pte |= L_PTE_SHARED;
@@ -645,6 +682,8 @@ static void __init build_mem_type_table(void)
 	mem_types[MT_MEMORY_RWX].prot_pte |= kern_pgprot;
 	mem_types[MT_MEMORY_RW].prot_sect |= ecc_mask | cp->pmd;
 	mem_types[MT_MEMORY_RW].prot_pte |= kern_pgprot;
+	mem_types[MT_MEMORY_RO].prot_sect |= ecc_mask | cp->pmd;
+	mem_types[MT_MEMORY_RO].prot_pte |= kern_pgprot;
 	mem_types[MT_MEMORY_DMA_READY].prot_pte |= kern_pgprot;
 	mem_types[MT_MEMORY_RWX_NONCACHED].prot_sect |= ecc_mask;
 	mem_types[MT_ROM].prot_sect |= cp->pmd;
@@ -1358,7 +1397,7 @@ static void __init devicemaps_init(const struct machine_desc *mdesc)
 		map.pfn = __phys_to_pfn(__atags_pointer & SECTION_MASK);
 		map.virtual = FDT_FIXED_BASE;
 		map.length = FDT_FIXED_SIZE;
-		map.type = MT_ROM;
+		map.type = MT_MEMORY_RO;
 		create_mapping(&map);
 	}
 
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index 2658f52903da..c1494a4dee25 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -26,6 +26,13 @@
 
 unsigned long vectors_base;
 
+/*
+ * empty_zero_page is a special page that is used for
+ * zero-initialized data and COW.
+ */
+struct page *empty_zero_page;
+EXPORT_SYMBOL(empty_zero_page);
+
 #ifdef CONFIG_ARM_MPU
 struct mpu_rgn_info mpu_rgn_info;
 #endif
@@ -148,9 +155,21 @@ void __init adjust_lowmem_bounds(void)
  */
 void __init paging_init(const struct machine_desc *mdesc)
 {
+	void *zero_page;
+
 	early_trap_init((void *)vectors_base);
 	mpu_setup();
+
+	/* allocate the zero page. */
+	zero_page = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
+	if (!zero_page)
+		panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
+		      __func__, PAGE_SIZE, PAGE_SIZE);
+
 	bootmem_init();
+
+	empty_zero_page = virt_to_page(zero_page);
+	flush_dcache_page(empty_zero_page);
 }
 
 /*
@@ -230,14 +249,7 @@ void *arch_memremap_wb(phys_addr_t phys_addr, size_t size)
 	return (void *)phys_addr;
 }
 
-void __iounmap(volatile void __iomem *addr)
-{
-}
-EXPORT_SYMBOL(__iounmap);
-
-void (*arch_iounmap)(volatile void __iomem *);
-
-void iounmap(volatile void __iomem *addr)
+void iounmap(volatile void __iomem *io_addr)
 {
 }
 EXPORT_SYMBOL(iounmap);
diff --git a/arch/arm/mm/proc-v7-bugs.c b/arch/arm/mm/proc-v7-bugs.c
index 114c05ab4dd9..8bc7a2d6d6c7 100644
--- a/arch/arm/mm/proc-v7-bugs.c
+++ b/arch/arm/mm/proc-v7-bugs.c
@@ -6,8 +6,35 @@
 #include <asm/cp15.h>
 #include <asm/cputype.h>
 #include <asm/proc-fns.h>
+#include <asm/spectre.h>
 #include <asm/system_misc.h>
 
+#ifdef CONFIG_ARM_PSCI
+static int __maybe_unused spectre_v2_get_cpu_fw_mitigation_state(void)
+{
+	struct arm_smccc_res res;
+
+	arm_smccc_1_1_invoke(ARM_SMCCC_ARCH_FEATURES_FUNC_ID,
+			     ARM_SMCCC_ARCH_WORKAROUND_1, &res);
+
+	switch ((int)res.a0) {
+	case SMCCC_RET_SUCCESS:
+		return SPECTRE_MITIGATED;
+
+	case SMCCC_ARCH_WORKAROUND_RET_UNAFFECTED:
+		return SPECTRE_UNAFFECTED;
+
+	default:
+		return SPECTRE_VULNERABLE;
+	}
+}
+#else
+static int __maybe_unused spectre_v2_get_cpu_fw_mitigation_state(void)
+{
+	return SPECTRE_VULNERABLE;
+}
+#endif
+
 #ifdef CONFIG_HARDEN_BRANCH_PREDICTOR
 DEFINE_PER_CPU(harden_branch_predictor_fn_t, harden_branch_predictor_fn);
 
@@ -36,13 +63,60 @@ static void __maybe_unused call_hvc_arch_workaround_1(void)
 	arm_smccc_1_1_hvc(ARM_SMCCC_ARCH_WORKAROUND_1, NULL);
 }
 
-static void cpu_v7_spectre_init(void)
+static unsigned int spectre_v2_install_workaround(unsigned int method)
 {
 	const char *spectre_v2_method = NULL;
 	int cpu = smp_processor_id();
 
 	if (per_cpu(harden_branch_predictor_fn, cpu))
-		return;
+		return SPECTRE_MITIGATED;
+
+	switch (method) {
+	case SPECTRE_V2_METHOD_BPIALL:
+		per_cpu(harden_branch_predictor_fn, cpu) =
+			harden_branch_predictor_bpiall;
+		spectre_v2_method = "BPIALL";
+		break;
+
+	case SPECTRE_V2_METHOD_ICIALLU:
+		per_cpu(harden_branch_predictor_fn, cpu) =
+			harden_branch_predictor_iciallu;
+		spectre_v2_method = "ICIALLU";
+		break;
+
+	case SPECTRE_V2_METHOD_HVC:
+		per_cpu(harden_branch_predictor_fn, cpu) =
+			call_hvc_arch_workaround_1;
+		cpu_do_switch_mm = cpu_v7_hvc_switch_mm;
+		spectre_v2_method = "hypervisor";
+		break;
+
+	case SPECTRE_V2_METHOD_SMC:
+		per_cpu(harden_branch_predictor_fn, cpu) =
+			call_smc_arch_workaround_1;
+		cpu_do_switch_mm = cpu_v7_smc_switch_mm;
+		spectre_v2_method = "firmware";
+		break;
+	}
+
+	if (spectre_v2_method)
+		pr_info("CPU%u: Spectre v2: using %s workaround\n",
+			smp_processor_id(), spectre_v2_method);
+
+	return SPECTRE_MITIGATED;
+}
+#else
+static unsigned int spectre_v2_install_workaround(unsigned int method)
+{
+	pr_info_once("Spectre V2: workarounds disabled by configuration\n");
+
+	return SPECTRE_VULNERABLE;
+}
+#endif
+
+static void cpu_v7_spectre_v2_init(void)
+{
+	unsigned int state, method = 0;
 
 	switch (read_cpuid_part()) {
 	case ARM_CPU_PART_CORTEX_A8:
@@ -51,69 +125,133 @@ static void cpu_v7_spectre_init(void)
 	case ARM_CPU_PART_CORTEX_A17:
 	case ARM_CPU_PART_CORTEX_A73:
 	case ARM_CPU_PART_CORTEX_A75:
-		per_cpu(harden_branch_predictor_fn, cpu) =
-			harden_branch_predictor_bpiall;
-		spectre_v2_method = "BPIALL";
+		state = SPECTRE_MITIGATED;
+		method = SPECTRE_V2_METHOD_BPIALL;
 		break;
 
 	case ARM_CPU_PART_CORTEX_A15:
 	case ARM_CPU_PART_BRAHMA_B15:
-		per_cpu(harden_branch_predictor_fn, cpu) =
-			harden_branch_predictor_iciallu;
-		spectre_v2_method = "ICIALLU";
+		state = SPECTRE_MITIGATED;
+		method = SPECTRE_V2_METHOD_ICIALLU;
 		break;
 
-#ifdef CONFIG_ARM_PSCI
 	case ARM_CPU_PART_BRAHMA_B53:
 		/* Requires no workaround */
+		state = SPECTRE_UNAFFECTED;
 		break;
+
 	default:
 		/* Other ARM CPUs require no workaround */
-		if (read_cpuid_implementor() == ARM_CPU_IMP_ARM)
+		if (read_cpuid_implementor() == ARM_CPU_IMP_ARM) {
+			state = SPECTRE_UNAFFECTED;
 			break;
+		}
+
 		fallthrough;
-		/* Cortex A57/A72 require firmware workaround */
-	case ARM_CPU_PART_CORTEX_A57:
-	case ARM_CPU_PART_CORTEX_A72: {
-		struct arm_smccc_res res;
 
-		arm_smccc_1_1_invoke(ARM_SMCCC_ARCH_FEATURES_FUNC_ID,
-				     ARM_SMCCC_ARCH_WORKAROUND_1, &res);
-		if ((int)res.a0 != 0)
-			return;
+	/* Cortex A57/A72 require firmware workaround */
+	case ARM_CPU_PART_CORTEX_A57:
+	case ARM_CPU_PART_CORTEX_A72:
+		state = spectre_v2_get_cpu_fw_mitigation_state();
+		if (state != SPECTRE_MITIGATED)
+			break;
 
 		switch (arm_smccc_1_1_get_conduit()) {
 		case SMCCC_CONDUIT_HVC:
-			per_cpu(harden_branch_predictor_fn, cpu) =
-				call_hvc_arch_workaround_1;
-			cpu_do_switch_mm = cpu_v7_hvc_switch_mm;
-			spectre_v2_method = "hypervisor";
+			method = SPECTRE_V2_METHOD_HVC;
 			break;
 
 		case SMCCC_CONDUIT_SMC:
-			per_cpu(harden_branch_predictor_fn, cpu) =
-				call_smc_arch_workaround_1;
-			cpu_do_switch_mm = cpu_v7_smc_switch_mm;
-			spectre_v2_method = "firmware";
+			method = SPECTRE_V2_METHOD_SMC;
 			break;
 
 		default:
+			state = SPECTRE_VULNERABLE;
 			break;
 		}
 	}
-#endif
+
+	if (state == SPECTRE_MITIGATED)
+		state = spectre_v2_install_workaround(method);
+
+	spectre_v2_update_state(state, method);
+}
+
+#ifdef CONFIG_HARDEN_BRANCH_HISTORY
+static int spectre_bhb_method;
+
+static const char *spectre_bhb_method_name(int method)
+{
+	switch (method) {
+	case SPECTRE_V2_METHOD_LOOP8:
+		return "loop";
+
+	case SPECTRE_V2_METHOD_BPIALL:
+		return "BPIALL";
+
+	default:
+		return "unknown";
 	}
+}
 
-	if (spectre_v2_method)
-		pr_info("CPU%u: Spectre v2: using %s workaround\n",
-			smp_processor_id(), spectre_v2_method);
+static int spectre_bhb_install_workaround(int method)
+{
+	if (spectre_bhb_method != method) {
+		if (spectre_bhb_method) {
+			pr_err("CPU%u: Spectre BHB: method disagreement, system vulnerable\n",
+			       smp_processor_id());
+
+			return SPECTRE_VULNERABLE;
+		}
+
+		if (spectre_bhb_update_vectors(method) == SPECTRE_VULNERABLE)
+			return SPECTRE_VULNERABLE;
+
+		spectre_bhb_method = method;
+
+		pr_info("CPU%u: Spectre BHB: enabling %s workaround for all CPUs\n",
+			smp_processor_id(), spectre_bhb_method_name(method));
+	}
+
+	return SPECTRE_MITIGATED;
 }
 #else
-static void cpu_v7_spectre_init(void)
+static int spectre_bhb_install_workaround(int method)
 {
+	return SPECTRE_VULNERABLE;
 }
 #endif
 
+static void cpu_v7_spectre_bhb_init(void)
+{
+	unsigned int state, method = 0;
+
+	switch (read_cpuid_part()) {
+	case ARM_CPU_PART_CORTEX_A15:
+	case ARM_CPU_PART_BRAHMA_B15:
+	case ARM_CPU_PART_CORTEX_A57:
+	case ARM_CPU_PART_CORTEX_A72:
+		state = SPECTRE_MITIGATED;
+		method = SPECTRE_V2_METHOD_LOOP8;
+		break;
+
+	case ARM_CPU_PART_CORTEX_A73:
+	case ARM_CPU_PART_CORTEX_A75:
+		state = SPECTRE_MITIGATED;
+		method = SPECTRE_V2_METHOD_BPIALL;
+		break;
+
+	default:
+		state = SPECTRE_UNAFFECTED;
+		break;
+	}
+
+	if (state == SPECTRE_MITIGATED)
+		state = spectre_bhb_install_workaround(method);
+
+	spectre_v2_update_state(state, method);
+}
+
 static __maybe_unused bool cpu_v7_check_auxcr_set(bool *warned,
 						  u32 mask, const char *msg)
 {
@@ -142,16 +280,18 @@ static bool check_spectre_auxcr(bool *warned, u32 bit)
 void cpu_v7_ca8_ibe(void)
 {
 	if (check_spectre_auxcr(this_cpu_ptr(&spectre_warned), BIT(6)))
-		cpu_v7_spectre_init();
+		cpu_v7_spectre_v2_init();
 }
 
 void cpu_v7_ca15_ibe(void)
 {
 	if (check_spectre_auxcr(this_cpu_ptr(&spectre_warned), BIT(0)))
-		cpu_v7_spectre_init();
+		cpu_v7_spectre_v2_init();
+	cpu_v7_spectre_bhb_init();
 }
 
 void cpu_v7_bugs_init(void)
 {
-	cpu_v7_spectre_init();
+	cpu_v7_spectre_v2_init();
+	cpu_v7_spectre_bhb_init();
 }
diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c
index 10ceebb7530b..6a1c9fca5260 100644
--- a/arch/arm/net/bpf_jit_32.c
+++ b/arch/arm/net/bpf_jit_32.c
@@ -712,22 +712,6 @@ static inline void emit_alu_r(const u8 dst, const u8 src, const bool is64,
 	}
 }
 
-/* ALU operation (32 bit)
- * dst = dst (op) src
- */
-static inline void emit_a32_alu_r(const s8 dst, const s8 src,
-				  struct jit_ctx *ctx, const bool is64,
-				  const bool hi, const u8 op) {
-	const s8 *tmp = bpf2a32[TMP_REG_1];
-	s8 rn, rd;
-
-	rn = arm_bpf_get_reg32(src, tmp[1], ctx);
-	rd = arm_bpf_get_reg32(dst, tmp[0], ctx);
-	/* ALU operation */
-	emit_alu_r(rd, rn, is64, hi, op, ctx);
-	arm_bpf_put_reg32(dst, rd, ctx);
-}
-
 /* ALU operation (64 bit) */
 static inline void emit_a32_alu_r64(const bool is64, const s8 dst[],
 				  const s8 src[], struct jit_ctx *ctx,
@@ -1864,7 +1848,7 @@ static int build_body(struct jit_ctx *ctx)
 		if (ctx->target == NULL)
 			ctx->offsets[i] = ctx->idx;
 
-		/* If unsuccesfull, return with error code */
+		/* If unsuccesful, return with error code */
 		if (ret)
 			return ret;
 	}
@@ -1973,7 +1957,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
 	 * for jit, although it can decrease the size of the image.
 	 *
 	 * As each arm instruction is of length 32bit, we are translating
-	 * number of JITed intructions into the size required to store these
+	 * number of JITed instructions into the size required to store these
 	 * JITed code.
 	 */
 	image_size = sizeof(u32) * ctx.idx;
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
deleted file mode 100644
index 272670ef1e92..000000000000
--- a/arch/arm/plat-omap/Kconfig
+++ /dev/null
@@ -1,119 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-config ARCH_OMAP
-	bool
-
-if ARCH_OMAP
-
-menu "TI OMAP Common Features"
-
-config ARCH_OMAP_OTG
-	bool
-
-comment "OMAP Feature Selections"
-
-config OMAP_DEBUG_DEVICES
-	bool
-	help
-	  For debug cards on TI reference boards.
-
-config OMAP_DEBUG_LEDS
-	def_bool y if NEW_LEDS
-	depends on OMAP_DEBUG_DEVICES
-	select LEDS_CLASS
-
-config POWER_AVS_OMAP
-	bool "AVS(Adaptive Voltage Scaling) support for OMAP IP versions 1&2"
-	depends on (ARCH_OMAP3 || ARCH_OMAP4) && PM
-	select POWER_SUPPLY
-	help
-	  Say Y to enable AVS(Adaptive Voltage Scaling)
-	  support on OMAP containing the version 1 or
-	  version 2 of the SmartReflex IP.
-	  V1 is the 65nm version used in OMAP3430.
-	  V2 is the update for the 45nm version of the IP used in OMAP3630
-	  and OMAP4430
-
-	  Please note, that by default SmartReflex is only
-	  initialized and not enabled. To enable the automatic voltage
-	  compensation for vdd mpu and vdd core from user space,
-	  user must write 1 to
-		/debug/smartreflex/sr_<X>/autocomp,
-	  where X is mpu_iva or core for OMAP3.
-	  Optionally autocompensation can be enabled in the kernel
-	  by default during system init via the enable_on_init flag
-	  which an be passed as platform data to the smartreflex driver.
-
-config POWER_AVS_OMAP_CLASS3
-	bool "Class 3 mode of Smartreflex Implementation"
-	depends on POWER_AVS_OMAP && TWL4030_CORE
-	help
-	  Say Y to enable Class 3 implementation of Smartreflex
-
-	  Class 3 implementation of Smartreflex employs continuous hardware
-	  voltage calibration.
-
-config OMAP_RESET_CLOCKS
-	bool "Reset unused clocks during boot"
-	depends on ARCH_OMAP
-	help
-	  Say Y if you want to reset unused clocks during boot.
-	  This option saves power, but assumes all drivers are
-	  using the clock framework. Broken drivers that do not
-	  yet use clock framework may not work with this option.
-	  If you are booting from another operating system, you
-	  probably do not want this option enabled until your
-	  device drivers work properly.
-
-config OMAP_MPU_TIMER
-	bool "Use mpu timer"
-	depends on ARCH_OMAP1
-	help
-	  Select this option if you want to use the OMAP mpu timer. This
-	  timer provides more intra-tick resolution than the 32KHz timer,
-	  but consumes more power.
-
-config OMAP_32K_TIMER
-	bool "Use 32KHz timer"
-	depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
-	default y if (ARCH_OMAP16XX || ARCH_OMAP2PLUS)
-	help
-	  Select this option if you want to enable the OMAP 32KHz timer.
-	  This timer saves power compared to the OMAP_MPU_TIMER, and has
-	  support for no tick during idle. The 32KHz timer provides less
-	  intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
-	  currently only available for OMAP16XX, 24XX, 34XX, OMAP4/5 and DRA7XX.
-
-	  On OMAP2PLUS this value is only used for CONFIG_HZ and
-	  CLOCK_TICK_RATE compile time calculation.
-	  The actual timer selection is done in the board file
-	  through the (DT_)MACHINE_START structure.
-
-
-config OMAP3_L2_AUX_SECURE_SAVE_RESTORE
-	bool "OMAP3 HS/EMU save and restore for L2 AUX control register"
-	depends on ARCH_OMAP3 && PM
-	help
-	  Without this option, L2 Auxiliary control register contents are
-	  lost during off-mode entry on HS/EMU devices. This feature
-	  requires support from PPA / boot-loader in HS/EMU devices, which
-	  currently does not exist by default.
-
-config OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
-	int "Service ID for the support routine to set L2 AUX control"
-	depends on OMAP3_L2_AUX_SECURE_SAVE_RESTORE
-	default 43
-	help
-	  PPA routine service ID for setting L2 auxiliary control register.
-
-config OMAP_SERIAL_WAKE
-	bool "Enable wake-up events for serial ports"
-	depends on ARCH_OMAP1 && OMAP_MUX
-	default y
-	help
-	  Select this option if you want to have your system wake up
-	  to data on the serial RX line. This allows you to wake the
-	  system from serial console.
-
-endmenu
-
-endif
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
deleted file mode 100644
index 371f2ed00eda..000000000000
--- a/arch/arm/plat-omap/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for the linux kernel.
-#
-
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-omap/include
-
-# Common support
-obj-y := sram.o dma.o counter_32k.o
-
-# omap_device support (OMAP2+ only at the moment)
-
-obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o
diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c
deleted file mode 100644
index 7a729ade2105..000000000000
--- a/arch/arm/plat-omap/counter_32k.c
+++ /dev/null
@@ -1,114 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * OMAP 32ksynctimer/counter_32k-related code
- *
- * Copyright (C) 2009 Texas Instruments
- * Copyright (C) 2010 Nokia Corporation
- * Tony Lindgren <tony@atomide.com>
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * NOTE: This timer is not the same timer as the old OMAP1 MPU timer.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/clocksource.h>
-#include <linux/sched_clock.h>
-
-#include <asm/mach/time.h>
-
-#include <plat/counter-32k.h>
-
-/* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */
-#define OMAP2_32KSYNCNT_REV_OFF		0x0
-#define OMAP2_32KSYNCNT_REV_SCHEME	(0x3 << 30)
-#define OMAP2_32KSYNCNT_CR_OFF_LOW	0x10
-#define OMAP2_32KSYNCNT_CR_OFF_HIGH	0x30
-
-/*
- * 32KHz clocksource ... always available, on pretty most chips except
- * OMAP 730 and 1510.  Other timers could be used as clocksources, with
- * higher resolution in free-running counter modes (e.g. 12 MHz xtal),
- * but systems won't necessarily want to spend resources that way.
- */
-static void __iomem *sync32k_cnt_reg;
-
-static u64 notrace omap_32k_read_sched_clock(void)
-{
-	return sync32k_cnt_reg ? readl_relaxed(sync32k_cnt_reg) : 0;
-}
-
-/**
- * omap_read_persistent_clock64 -  Return time from a persistent clock.
- *
- * Reads the time from a source which isn't disabled during PM, the
- * 32k sync timer.  Convert the cycles elapsed since last read into
- * nsecs and adds to a monotonically increasing timespec64.
- */
-static struct timespec64 persistent_ts;
-static cycles_t cycles;
-static unsigned int persistent_mult, persistent_shift;
-
-static void omap_read_persistent_clock64(struct timespec64 *ts)
-{
-	unsigned long long nsecs;
-	cycles_t last_cycles;
-
-	last_cycles = cycles;
-	cycles = sync32k_cnt_reg ? readl_relaxed(sync32k_cnt_reg) : 0;
-
-	nsecs = clocksource_cyc2ns(cycles - last_cycles,
-					persistent_mult, persistent_shift);
-
-	timespec64_add_ns(&persistent_ts, nsecs);
-
-	*ts = persistent_ts;
-}
-
-/**
- * omap_init_clocksource_32k - setup and register counter 32k as a
- * kernel clocksource
- * @pbase: base addr of counter_32k module
- * @size: size of counter_32k to map
- *
- * Returns 0 upon success or negative error code upon failure.
- *
- */
-int __init omap_init_clocksource_32k(void __iomem *vbase)
-{
-	int ret;
-
-	/*
-	 * 32k sync Counter IP register offsets vary between the
-	 * highlander version and the legacy ones.
-	 * The 'SCHEME' bits(30-31) of the revision register is used
-	 * to identify the version.
-	 */
-	if (readl_relaxed(vbase + OMAP2_32KSYNCNT_REV_OFF) &
-						OMAP2_32KSYNCNT_REV_SCHEME)
-		sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF_HIGH;
-	else
-		sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF_LOW;
-
-	/*
-	 * 120000 rough estimate from the calculations in
-	 * __clocksource_update_freq_scale.
-	 */
-	clocks_calc_mult_shift(&persistent_mult, &persistent_shift,
-			32768, NSEC_PER_SEC, 120000);
-
-	ret = clocksource_mmio_init(sync32k_cnt_reg, "32k_counter", 32768,
-				250, 32, clocksource_mmio_readl_up);
-	if (ret) {
-		pr_err("32k_counter: can't register clocksource\n");
-		return ret;
-	}
-
-	sched_clock_register(omap_32k_read_sched_clock, 32, 32768);
-	register_persistent_clock(omap_read_persistent_clock64);
-	pr_info("OMAP clocksource: 32k_counter at 32768 Hz\n");
-
-	return 0;
-}
diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c
deleted file mode 100644
index 2b698d074874..000000000000
--- a/arch/arm/plat-omap/debug-leds.c
+++ /dev/null
@@ -1,171 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/plat-omap/debug-leds.c
- *
- * Copyright 2011 by Bryan Wu <bryan.wu@canonical.com>
- * Copyright 2003 by Texas Instruments Incorporated
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/io.h>
-#include <linux/platform_data/gpio-omap.h>
-#include <linux/slab.h>
-
-#include <asm/mach-types.h>
-
-/* Many OMAP development platforms reuse the same "debug board"; these
- * platforms include H2, H3, H4, and Perseus2.  There are 16 LEDs on the
- * debug board (all green), accessed through FPGA registers.
- */
-
-/* NOTE:  most boards don't have a static mapping for the FPGA ... */
-struct h2p2_dbg_fpga {
-	/* offset 0x00 */
-	u16		smc91x[8];
-	/* offset 0x10 */
-	u16		fpga_rev;
-	u16		board_rev;
-	u16		gpio_outputs;
-	u16		leds;
-	/* offset 0x18 */
-	u16		misc_inputs;
-	u16		lan_status;
-	u16		lan_reset;
-	u16		reserved0;
-	/* offset 0x20 */
-	u16		ps2_data;
-	u16		ps2_ctrl;
-	/* plus also 4 rs232 ports ... */
-};
-
-static struct h2p2_dbg_fpga __iomem *fpga;
-
-static u16 fpga_led_state;
-
-struct dbg_led {
-	struct led_classdev	cdev;
-	u16			mask;
-};
-
-static const struct {
-	const char *name;
-	const char *trigger;
-} dbg_leds[] = {
-	{ "dbg:d4", "heartbeat", },
-	{ "dbg:d5", "cpu0", },
-	{ "dbg:d6", "default-on", },
-	{ "dbg:d7", },
-	{ "dbg:d8", },
-	{ "dbg:d9", },
-	{ "dbg:d10", },
-	{ "dbg:d11", },
-	{ "dbg:d12", },
-	{ "dbg:d13", },
-	{ "dbg:d14", },
-	{ "dbg:d15", },
-	{ "dbg:d16", },
-	{ "dbg:d17", },
-	{ "dbg:d18", },
-	{ "dbg:d19", },
-};
-
-/*
- * The triggers lines up below will only be used if the
- * LED triggers are compiled in.
- */
-static void dbg_led_set(struct led_classdev *cdev,
-			      enum led_brightness b)
-{
-	struct dbg_led *led = container_of(cdev, struct dbg_led, cdev);
-	u16 reg;
-
-	reg = readw_relaxed(&fpga->leds);
-	if (b != LED_OFF)
-		reg |= led->mask;
-	else
-		reg &= ~led->mask;
-	writew_relaxed(reg, &fpga->leds);
-}
-
-static enum led_brightness dbg_led_get(struct led_classdev *cdev)
-{
-	struct dbg_led *led = container_of(cdev, struct dbg_led, cdev);
-	u16 reg;
-
-	reg = readw_relaxed(&fpga->leds);
-	return (reg & led->mask) ? LED_FULL : LED_OFF;
-}
-
-static int fpga_probe(struct platform_device *pdev)
-{
-	struct resource	*iomem;
-	int i;
-
-	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!iomem)
-		return -ENODEV;
-
-	fpga = ioremap(iomem->start, resource_size(iomem));
-	writew_relaxed(0xff, &fpga->leds);
-
-	for (i = 0; i < ARRAY_SIZE(dbg_leds); i++) {
-		struct dbg_led *led;
-
-		led = kzalloc(sizeof(*led), GFP_KERNEL);
-		if (!led)
-			break;
-
-		led->cdev.name = dbg_leds[i].name;
-		led->cdev.brightness_set = dbg_led_set;
-		led->cdev.brightness_get = dbg_led_get;
-		led->cdev.default_trigger = dbg_leds[i].trigger;
-		led->mask = BIT(i);
-
-		if (led_classdev_register(NULL, &led->cdev) < 0) {
-			kfree(led);
-			break;
-		}
-	}
-
-	return 0;
-}
-
-static int fpga_suspend_noirq(struct device *dev)
-{
-	fpga_led_state = readw_relaxed(&fpga->leds);
-	writew_relaxed(0xff, &fpga->leds);
-
-	return 0;
-}
-
-static int fpga_resume_noirq(struct device *dev)
-{
-	writew_relaxed(~fpga_led_state, &fpga->leds);
-	return 0;
-}
-
-static const struct dev_pm_ops fpga_dev_pm_ops = {
-	.suspend_noirq = fpga_suspend_noirq,
-	.resume_noirq = fpga_resume_noirq,
-};
-
-static struct platform_driver led_driver = {
-	.driver.name	= "omap_dbg_led",
-	.driver.pm	= &fpga_dev_pm_ops,
-	.probe		= fpga_probe,
-};
-
-static int __init fpga_init(void)
-{
-	if (machine_is_omap_h4()
-			|| machine_is_omap_h3()
-			|| machine_is_omap_h2()
-			|| machine_is_omap_perseus2()
-			)
-		return platform_driver_register(&led_driver);
-	return 0;
-}
-fs_initcall(fpga_init);
diff --git a/arch/arm/plat-omap/include/plat/counter-32k.h b/arch/arm/plat-omap/include/plat/counter-32k.h
deleted file mode 100644
index da000d482ff2..000000000000
--- a/arch/arm/plat-omap/include/plat/counter-32k.h
+++ /dev/null
@@ -1 +0,0 @@
-int omap_init_clocksource_32k(void __iomem *vbase);
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
deleted file mode 100644
index 36f4c352cc66..000000000000
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * OMAP cpu type detection
- *
- * Copyright (C) 2004, 2008 Nokia Corporation
- *
- * Copyright (C) 2009-11 Texas Instruments.
- *
- * Written by Tony Lindgren <tony.lindgren@nokia.com>
- *
- * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
- */
-
-#ifndef __ASM_ARCH_OMAP_CPU_H
-#define __ASM_ARCH_OMAP_CPU_H
-
-#ifdef CONFIG_ARCH_OMAP1
-#include <mach/soc.h>
-#endif
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/sram.h b/arch/arm/plat-omap/include/plat/sram.h
deleted file mode 100644
index 30a07730807a..000000000000
--- a/arch/arm/plat-omap/include/plat/sram.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-int omap_sram_init(void);
-
-void omap_map_sram(unsigned long start, unsigned long size,
-			unsigned long skip, int cached);
-void omap_sram_reset(void);
-
-extern void *omap_sram_push(void *funcp, unsigned long size);
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
deleted file mode 100644
index 0f1eacad7fe3..000000000000
--- a/arch/arm/plat-omap/sram.c
+++ /dev/null
@@ -1,129 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/plat-omap/sram.c
- *
- * OMAP SRAM detection and management
- *
- * Copyright (C) 2005 Nokia Corporation
- * Written by Tony Lindgren <tony@atomide.com>
- *
- * Copyright (C) 2009-2012 Texas Instruments
- * Added OMAP4/5 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- */
-#undef DEBUG
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <asm/fncpy.h>
-#include <asm/tlb.h>
-#include <asm/cacheflush.h>
-#include <asm/set_memory.h>
-
-#include <asm/mach/map.h>
-
-#include <plat/sram.h>
-
-#define ROUND_DOWN(value,boundary)	((value) & (~((boundary)-1)))
-
-static void __iomem *omap_sram_base;
-static unsigned long omap_sram_skip;
-static unsigned long omap_sram_size;
-static void __iomem *omap_sram_ceil;
-
-/*
- * Memory allocator for SRAM: calculates the new ceiling address
- * for pushing a function using the fncpy API.
- *
- * Note that fncpy requires the returned address to be aligned
- * to an 8-byte boundary.
- */
-static void *omap_sram_push_address(unsigned long size)
-{
-	unsigned long available, new_ceil = (unsigned long)omap_sram_ceil;
-
-	available = omap_sram_ceil - (omap_sram_base + omap_sram_skip);
-
-	if (size > available) {
-		pr_err("Not enough space in SRAM\n");
-		return NULL;
-	}
-
-	new_ceil -= size;
-	new_ceil = ROUND_DOWN(new_ceil, FNCPY_ALIGN);
-	omap_sram_ceil = IOMEM(new_ceil);
-
-	return (void *)omap_sram_ceil;
-}
-
-void *omap_sram_push(void *funcp, unsigned long size)
-{
-	void *sram;
-	unsigned long base;
-	int pages;
-	void *dst = NULL;
-
-	sram = omap_sram_push_address(size);
-	if (!sram)
-		return NULL;
-
-	base = (unsigned long)sram & PAGE_MASK;
-	pages = PAGE_ALIGN(size) / PAGE_SIZE;
-
-	set_memory_rw(base, pages);
-
-	dst = fncpy(sram, funcp, size);
-
-	set_memory_ro(base, pages);
-	set_memory_x(base, pages);
-
-	return dst;
-}
-
-/*
- * The SRAM context is lost during off-idle and stack
- * needs to be reset.
- */
-void omap_sram_reset(void)
-{
-	omap_sram_ceil = omap_sram_base + omap_sram_size;
-}
-
-/*
- * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early.
- */
-void __init omap_map_sram(unsigned long start, unsigned long size,
-				 unsigned long skip, int cached)
-{
-	unsigned long base;
-	int pages;
-
-	if (size == 0)
-		return;
-
-	start = ROUND_DOWN(start, PAGE_SIZE);
-	omap_sram_size = size;
-	omap_sram_skip = skip;
-	omap_sram_base = __arm_ioremap_exec(start, size, cached);
-	if (!omap_sram_base) {
-		pr_err("SRAM: Could not map\n");
-		return;
-	}
-
-	omap_sram_reset();
-
-	/*
-	 * Looks like we need to preserve some bootloader code at the
-	 * beginning of SRAM for jumping to flash for reboot to work...
-	 */
-	memset_io(omap_sram_base + omap_sram_skip, 0,
-		  omap_sram_size - omap_sram_skip);
-
-	base = (unsigned long)omap_sram_base;
-	pages = PAGE_ALIGN(omap_sram_size) / PAGE_SIZE;
-
-	set_memory_ro(base, pages);
-	set_memory_x(base, pages);
-}
diff --git a/arch/arm/plat-orion/Makefile b/arch/arm/plat-orion/Makefile
index 4e3f25de13c1..830b0be038c6 100644
--- a/arch/arm/plat-orion/Makefile
+++ b/arch/arm/plat-orion/Makefile
@@ -2,7 +2,7 @@
 #
 # Makefile for the linux kernel.
 #
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
+ccflags-y := -I$(srctree)/$(src)/include
 
 orion-gpio-$(CONFIG_GPIOLIB)      += gpio.o
 obj-$(CONFIG_PLAT_ORION_LEGACY)   += irq.o pcie.o time.o common.o mpp.o
diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c
index 734f0be4f14a..3ef9ecdd6343 100644
--- a/arch/arm/plat-orion/gpio.c
+++ b/arch/arm/plat-orion/gpio.c
@@ -516,8 +516,7 @@ static void orion_gpio_mask_irq(struct irq_data *d)
 	irq_gc_unlock(gc);
 }
 
-void __init orion_gpio_init(struct device_node *np,
-			    int gpio_base, int ngpio,
+void __init orion_gpio_init(int gpio_base, int ngpio,
 			    void __iomem *base, int mask_offset,
 			    int secondary_irq_base,
 			    int irqs[4])
@@ -545,9 +544,6 @@ void __init orion_gpio_init(struct device_node *np,
 	ochip->chip.base = gpio_base;
 	ochip->chip.ngpio = ngpio;
 	ochip->chip.can_sleep = 0;
-#ifdef CONFIG_OF
-	ochip->chip.of_node = np;
-#endif
 	ochip->chip.dbg_show = orion_gpio_dbg_show;
 
 	spin_lock_init(&ochip->lock);
@@ -605,7 +601,7 @@ void __init orion_gpio_init(struct device_node *np,
 			       IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE);
 
 	/* Setup irq domain on top of the generic chip. */
-	ochip->domain = irq_domain_add_legacy(np,
+	ochip->domain = irq_domain_add_legacy(NULL,
 					      ochip->chip.ngpio,
 					      ochip->secondary_irq_base,
 					      ochip->secondary_irq_base,
diff --git a/arch/arm/plat-orion/include/plat/orion-gpio.h b/arch/arm/plat-orion/include/plat/orion-gpio.h
index e856b073a9c8..25a2963e0e0f 100644
--- a/arch/arm/plat-orion/include/plat/orion-gpio.h
+++ b/arch/arm/plat-orion/include/plat/orion-gpio.h
@@ -30,8 +30,7 @@ int orion_gpio_led_blink_set(struct gpio_desc *desc, int state,
 void orion_gpio_set_valid(unsigned pin, int mode);
 
 /* Initialize gpiolib. */
-void __init orion_gpio_init(struct device_node *np,
-			    int gpio_base, int ngpio,
+void __init orion_gpio_init(int gpio_base, int ngpio,
 			    void __iomem *base, int mask_offset,
 			    int secondary_irq_base,
 			    int irq[4]);
diff --git a/arch/arm/plat-pxa/Kconfig b/arch/arm/plat-pxa/Kconfig
deleted file mode 100644
index 6f7a0a39c2b9..000000000000
--- a/arch/arm/plat-pxa/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-if PLAT_PXA
-
-config PXA_SSP
-	tristate
-	help
-	  Enable support for PXA2xx SSP ports
-
-endif
diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile
deleted file mode 100644
index 349ea0af8450..000000000000
--- a/arch/arm/plat-pxa/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for code common across different PXA processor families
-#
-ccflags-$(CONFIG_ARCH_MMP) := -I$(srctree)/$(src)/include
-
-obj-$(CONFIG_PXA3xx)		+= mfp.o
-obj-$(CONFIG_ARCH_MMP)		+= mfp.o
-
-obj-$(CONFIG_PXA_SSP)		+= ssp.o
diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h
deleted file mode 100644
index 3accaa9ee781..000000000000
--- a/arch/arm/plat-pxa/include/plat/mfp.h
+++ /dev/null
@@ -1,472 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/plat-pxa/include/plat/mfp.h
- *
- *   Common Multi-Function Pin Definitions
- *
- * Copyright (C) 2007 Marvell International Ltd.
- *
- * 2007-8-21: eric miao <eric.miao@marvell.com>
- *            initial version
- */
-
-#ifndef __ASM_PLAT_MFP_H
-#define __ASM_PLAT_MFP_H
-
-#define mfp_to_gpio(m)	((m) % 256)
-
-/* list of all the configurable MFP pins */
-enum {
-	MFP_PIN_INVALID = -1,
-
-	MFP_PIN_GPIO0 = 0,
-	MFP_PIN_GPIO1,
-	MFP_PIN_GPIO2,
-	MFP_PIN_GPIO3,
-	MFP_PIN_GPIO4,
-	MFP_PIN_GPIO5,
-	MFP_PIN_GPIO6,
-	MFP_PIN_GPIO7,
-	MFP_PIN_GPIO8,
-	MFP_PIN_GPIO9,
-	MFP_PIN_GPIO10,
-	MFP_PIN_GPIO11,
-	MFP_PIN_GPIO12,
-	MFP_PIN_GPIO13,
-	MFP_PIN_GPIO14,
-	MFP_PIN_GPIO15,
-	MFP_PIN_GPIO16,
-	MFP_PIN_GPIO17,
-	MFP_PIN_GPIO18,
-	MFP_PIN_GPIO19,
-	MFP_PIN_GPIO20,
-	MFP_PIN_GPIO21,
-	MFP_PIN_GPIO22,
-	MFP_PIN_GPIO23,
-	MFP_PIN_GPIO24,
-	MFP_PIN_GPIO25,
-	MFP_PIN_GPIO26,
-	MFP_PIN_GPIO27,
-	MFP_PIN_GPIO28,
-	MFP_PIN_GPIO29,
-	MFP_PIN_GPIO30,
-	MFP_PIN_GPIO31,
-	MFP_PIN_GPIO32,
-	MFP_PIN_GPIO33,
-	MFP_PIN_GPIO34,
-	MFP_PIN_GPIO35,
-	MFP_PIN_GPIO36,
-	MFP_PIN_GPIO37,
-	MFP_PIN_GPIO38,
-	MFP_PIN_GPIO39,
-	MFP_PIN_GPIO40,
-	MFP_PIN_GPIO41,
-	MFP_PIN_GPIO42,
-	MFP_PIN_GPIO43,
-	MFP_PIN_GPIO44,
-	MFP_PIN_GPIO45,
-	MFP_PIN_GPIO46,
-	MFP_PIN_GPIO47,
-	MFP_PIN_GPIO48,
-	MFP_PIN_GPIO49,
-	MFP_PIN_GPIO50,
-	MFP_PIN_GPIO51,
-	MFP_PIN_GPIO52,
-	MFP_PIN_GPIO53,
-	MFP_PIN_GPIO54,
-	MFP_PIN_GPIO55,
-	MFP_PIN_GPIO56,
-	MFP_PIN_GPIO57,
-	MFP_PIN_GPIO58,
-	MFP_PIN_GPIO59,
-	MFP_PIN_GPIO60,
-	MFP_PIN_GPIO61,
-	MFP_PIN_GPIO62,
-	MFP_PIN_GPIO63,
-	MFP_PIN_GPIO64,
-	MFP_PIN_GPIO65,
-	MFP_PIN_GPIO66,
-	MFP_PIN_GPIO67,
-	MFP_PIN_GPIO68,
-	MFP_PIN_GPIO69,
-	MFP_PIN_GPIO70,
-	MFP_PIN_GPIO71,
-	MFP_PIN_GPIO72,
-	MFP_PIN_GPIO73,
-	MFP_PIN_GPIO74,
-	MFP_PIN_GPIO75,
-	MFP_PIN_GPIO76,
-	MFP_PIN_GPIO77,
-	MFP_PIN_GPIO78,
-	MFP_PIN_GPIO79,
-	MFP_PIN_GPIO80,
-	MFP_PIN_GPIO81,
-	MFP_PIN_GPIO82,
-	MFP_PIN_GPIO83,
-	MFP_PIN_GPIO84,
-	MFP_PIN_GPIO85,
-	MFP_PIN_GPIO86,
-	MFP_PIN_GPIO87,
-	MFP_PIN_GPIO88,
-	MFP_PIN_GPIO89,
-	MFP_PIN_GPIO90,
-	MFP_PIN_GPIO91,
-	MFP_PIN_GPIO92,
-	MFP_PIN_GPIO93,
-	MFP_PIN_GPIO94,
-	MFP_PIN_GPIO95,
-	MFP_PIN_GPIO96,
-	MFP_PIN_GPIO97,
-	MFP_PIN_GPIO98,
-	MFP_PIN_GPIO99,
-	MFP_PIN_GPIO100,
-	MFP_PIN_GPIO101,
-	MFP_PIN_GPIO102,
-	MFP_PIN_GPIO103,
-	MFP_PIN_GPIO104,
-	MFP_PIN_GPIO105,
-	MFP_PIN_GPIO106,
-	MFP_PIN_GPIO107,
-	MFP_PIN_GPIO108,
-	MFP_PIN_GPIO109,
-	MFP_PIN_GPIO110,
-	MFP_PIN_GPIO111,
-	MFP_PIN_GPIO112,
-	MFP_PIN_GPIO113,
-	MFP_PIN_GPIO114,
-	MFP_PIN_GPIO115,
-	MFP_PIN_GPIO116,
-	MFP_PIN_GPIO117,
-	MFP_PIN_GPIO118,
-	MFP_PIN_GPIO119,
-	MFP_PIN_GPIO120,
-	MFP_PIN_GPIO121,
-	MFP_PIN_GPIO122,
-	MFP_PIN_GPIO123,
-	MFP_PIN_GPIO124,
-	MFP_PIN_GPIO125,
-	MFP_PIN_GPIO126,
-	MFP_PIN_GPIO127,
-
-	MFP_PIN_GPIO128,
-	MFP_PIN_GPIO129,
-	MFP_PIN_GPIO130,
-	MFP_PIN_GPIO131,
-	MFP_PIN_GPIO132,
-	MFP_PIN_GPIO133,
-	MFP_PIN_GPIO134,
-	MFP_PIN_GPIO135,
-	MFP_PIN_GPIO136,
-	MFP_PIN_GPIO137,
-	MFP_PIN_GPIO138,
-	MFP_PIN_GPIO139,
-	MFP_PIN_GPIO140,
-	MFP_PIN_GPIO141,
-	MFP_PIN_GPIO142,
-	MFP_PIN_GPIO143,
-	MFP_PIN_GPIO144,
-	MFP_PIN_GPIO145,
-	MFP_PIN_GPIO146,
-	MFP_PIN_GPIO147,
-	MFP_PIN_GPIO148,
-	MFP_PIN_GPIO149,
-	MFP_PIN_GPIO150,
-	MFP_PIN_GPIO151,
-	MFP_PIN_GPIO152,
-	MFP_PIN_GPIO153,
-	MFP_PIN_GPIO154,
-	MFP_PIN_GPIO155,
-	MFP_PIN_GPIO156,
-	MFP_PIN_GPIO157,
-	MFP_PIN_GPIO158,
-	MFP_PIN_GPIO159,
-	MFP_PIN_GPIO160,
-	MFP_PIN_GPIO161,
-	MFP_PIN_GPIO162,
-	MFP_PIN_GPIO163,
-	MFP_PIN_GPIO164,
-	MFP_PIN_GPIO165,
-	MFP_PIN_GPIO166,
-	MFP_PIN_GPIO167,
-	MFP_PIN_GPIO168,
-	MFP_PIN_GPIO169,
-	MFP_PIN_GPIO170,
-	MFP_PIN_GPIO171,
-	MFP_PIN_GPIO172,
-	MFP_PIN_GPIO173,
-	MFP_PIN_GPIO174,
-	MFP_PIN_GPIO175,
-	MFP_PIN_GPIO176,
-	MFP_PIN_GPIO177,
-	MFP_PIN_GPIO178,
-	MFP_PIN_GPIO179,
-	MFP_PIN_GPIO180,
-	MFP_PIN_GPIO181,
-	MFP_PIN_GPIO182,
-	MFP_PIN_GPIO183,
-	MFP_PIN_GPIO184,
-	MFP_PIN_GPIO185,
-	MFP_PIN_GPIO186,
-	MFP_PIN_GPIO187,
-	MFP_PIN_GPIO188,
-	MFP_PIN_GPIO189,
-	MFP_PIN_GPIO190,
-	MFP_PIN_GPIO191,
-
-	MFP_PIN_GPIO255 = 255,
-
-	MFP_PIN_GPIO0_2,
-	MFP_PIN_GPIO1_2,
-	MFP_PIN_GPIO2_2,
-	MFP_PIN_GPIO3_2,
-	MFP_PIN_GPIO4_2,
-	MFP_PIN_GPIO5_2,
-	MFP_PIN_GPIO6_2,
-	MFP_PIN_GPIO7_2,
-	MFP_PIN_GPIO8_2,
-	MFP_PIN_GPIO9_2,
-	MFP_PIN_GPIO10_2,
-	MFP_PIN_GPIO11_2,
-	MFP_PIN_GPIO12_2,
-	MFP_PIN_GPIO13_2,
-	MFP_PIN_GPIO14_2,
-	MFP_PIN_GPIO15_2,
-	MFP_PIN_GPIO16_2,
-	MFP_PIN_GPIO17_2,
-
-	MFP_PIN_ULPI_STP,
-	MFP_PIN_ULPI_NXT,
-	MFP_PIN_ULPI_DIR,
-
-	MFP_PIN_nXCVREN,
-	MFP_PIN_DF_CLE_nOE,
-	MFP_PIN_DF_nADV1_ALE,
-	MFP_PIN_DF_SCLK_E,
-	MFP_PIN_DF_SCLK_S,
-	MFP_PIN_nBE0,
-	MFP_PIN_nBE1,
-	MFP_PIN_DF_nADV2_ALE,
-	MFP_PIN_DF_INT_RnB,
-	MFP_PIN_DF_nCS0,
-	MFP_PIN_DF_nCS1,
-	MFP_PIN_nLUA,
-	MFP_PIN_nLLA,
-	MFP_PIN_DF_nWE,
-	MFP_PIN_DF_ALE_nWE,
-	MFP_PIN_DF_nRE_nOE,
-	MFP_PIN_DF_ADDR0,
-	MFP_PIN_DF_ADDR1,
-	MFP_PIN_DF_ADDR2,
-	MFP_PIN_DF_ADDR3,
-	MFP_PIN_DF_IO0,
-	MFP_PIN_DF_IO1,
-	MFP_PIN_DF_IO2,
-	MFP_PIN_DF_IO3,
-	MFP_PIN_DF_IO4,
-	MFP_PIN_DF_IO5,
-	MFP_PIN_DF_IO6,
-	MFP_PIN_DF_IO7,
-	MFP_PIN_DF_IO8,
-	MFP_PIN_DF_IO9,
-	MFP_PIN_DF_IO10,
-	MFP_PIN_DF_IO11,
-	MFP_PIN_DF_IO12,
-	MFP_PIN_DF_IO13,
-	MFP_PIN_DF_IO14,
-	MFP_PIN_DF_IO15,
-	MFP_PIN_DF_nCS0_SM_nCS2,
-	MFP_PIN_DF_nCS1_SM_nCS3,
-	MFP_PIN_SM_nCS0,
-	MFP_PIN_SM_nCS1,
-	MFP_PIN_DF_WEn,
-	MFP_PIN_DF_REn,
-	MFP_PIN_DF_CLE_SM_OEn,
-	MFP_PIN_DF_ALE_SM_WEn,
-	MFP_PIN_DF_RDY0,
-	MFP_PIN_DF_RDY1,
-
-	MFP_PIN_SM_SCLK,
-	MFP_PIN_SM_BE0,
-	MFP_PIN_SM_BE1,
-	MFP_PIN_SM_ADV,
-	MFP_PIN_SM_ADVMUX,
-	MFP_PIN_SM_RDY,
-
-	MFP_PIN_MMC1_DAT7,
-	MFP_PIN_MMC1_DAT6,
-	MFP_PIN_MMC1_DAT5,
-	MFP_PIN_MMC1_DAT4,
-	MFP_PIN_MMC1_DAT3,
-	MFP_PIN_MMC1_DAT2,
-	MFP_PIN_MMC1_DAT1,
-	MFP_PIN_MMC1_DAT0,
-	MFP_PIN_MMC1_CMD,
-	MFP_PIN_MMC1_CLK,
-	MFP_PIN_MMC1_CD,
-	MFP_PIN_MMC1_WP,
-
-	/* additional pins on PXA930 */
-	MFP_PIN_GSIM_UIO,
-	MFP_PIN_GSIM_UCLK,
-	MFP_PIN_GSIM_UDET,
-	MFP_PIN_GSIM_nURST,
-	MFP_PIN_PMIC_INT,
-	MFP_PIN_RDY,
-
-	/* additional pins on MMP2 */
-	MFP_PIN_TWSI1_SCL,
-	MFP_PIN_TWSI1_SDA,
-	MFP_PIN_TWSI4_SCL,
-	MFP_PIN_TWSI4_SDA,
-	MFP_PIN_CLK_REQ,
-
-	MFP_PIN_MAX,
-};
-
-/*
- * a possible MFP configuration is represented by a 32-bit integer
- *
- * bit  0.. 9 - MFP Pin Number (1024 Pins Maximum)
- * bit 10..12 - Alternate Function Selection
- * bit 13..15 - Drive Strength
- * bit 16..18 - Low Power Mode State
- * bit 19..20 - Low Power Mode Edge Detection
- * bit 21..22 - Run Mode Pull State
- *
- * to facilitate the definition, the following macros are provided
- *
- * MFP_CFG_DEFAULT - default MFP configuration value, with
- * 		  alternate function = 0,
- * 		  drive strength = fast 3mA (MFP_DS03X)
- * 		  low power mode = default
- * 		  edge detection = none
- *
- * MFP_CFG	- default MFPR value with alternate function
- * MFP_CFG_DRV	- default MFPR value with alternate function and
- * 		  pin drive strength
- * MFP_CFG_LPM	- default MFPR value with alternate function and
- * 		  low power mode
- * MFP_CFG_X	- default MFPR value with alternate function,
- * 		  pin drive strength and low power mode
- */
-
-typedef unsigned long mfp_cfg_t;
-
-#define MFP_PIN(x)		((x) & 0x3ff)
-
-#define MFP_AF0			(0x0 << 10)
-#define MFP_AF1			(0x1 << 10)
-#define MFP_AF2			(0x2 << 10)
-#define MFP_AF3			(0x3 << 10)
-#define MFP_AF4			(0x4 << 10)
-#define MFP_AF5			(0x5 << 10)
-#define MFP_AF6			(0x6 << 10)
-#define MFP_AF7			(0x7 << 10)
-#define MFP_AF_MASK		(0x7 << 10)
-#define MFP_AF(x)		(((x) >> 10) & 0x7)
-
-#define MFP_DS01X		(0x0 << 13)
-#define MFP_DS02X		(0x1 << 13)
-#define MFP_DS03X		(0x2 << 13)
-#define MFP_DS04X		(0x3 << 13)
-#define MFP_DS06X		(0x4 << 13)
-#define MFP_DS08X		(0x5 << 13)
-#define MFP_DS10X		(0x6 << 13)
-#define MFP_DS13X		(0x7 << 13)
-#define MFP_DS_MASK		(0x7 << 13)
-#define MFP_DS(x)		(((x) >> 13) & 0x7)
-
-#define MFP_LPM_DEFAULT		(0x0 << 16)
-#define MFP_LPM_DRIVE_LOW	(0x1 << 16)
-#define MFP_LPM_DRIVE_HIGH	(0x2 << 16)
-#define MFP_LPM_PULL_LOW	(0x3 << 16)
-#define MFP_LPM_PULL_HIGH	(0x4 << 16)
-#define MFP_LPM_FLOAT		(0x5 << 16)
-#define MFP_LPM_INPUT		(0x6 << 16)
-#define MFP_LPM_STATE_MASK	(0x7 << 16)
-#define MFP_LPM_STATE(x)	(((x) >> 16) & 0x7)
-
-#define MFP_LPM_EDGE_NONE	(0x0 << 19)
-#define MFP_LPM_EDGE_RISE	(0x1 << 19)
-#define MFP_LPM_EDGE_FALL	(0x2 << 19)
-#define MFP_LPM_EDGE_BOTH	(0x3 << 19)
-#define MFP_LPM_EDGE_MASK	(0x3 << 19)
-#define MFP_LPM_EDGE(x)		(((x) >> 19) & 0x3)
-
-#define MFP_PULL_NONE		(0x0 << 21)
-#define MFP_PULL_LOW		(0x1 << 21)
-#define MFP_PULL_HIGH		(0x2 << 21)
-#define MFP_PULL_BOTH		(0x3 << 21)
-#define MFP_PULL_FLOAT		(0x4 << 21)
-#define MFP_PULL_MASK		(0x7 << 21)
-#define MFP_PULL(x)		(((x) >> 21) & 0x7)
-
-#define MFP_CFG_DEFAULT		(MFP_AF0 | MFP_DS03X | MFP_LPM_DEFAULT |\
-				 MFP_LPM_EDGE_NONE | MFP_PULL_NONE)
-
-#define MFP_CFG(pin, af)		\
-	((MFP_CFG_DEFAULT & ~MFP_AF_MASK) |\
-	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af))
-
-#define MFP_CFG_DRV(pin, af, drv)	\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK)) |\
-	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv))
-
-#define MFP_CFG_LPM(pin, af, lpm)	\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_LPM_STATE_MASK)) |\
-	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_LPM_##lpm))
-
-#define MFP_CFG_X(pin, af, drv, lpm)	\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\
-	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm))
-
-#if defined(CONFIG_PXA3xx) || defined(CONFIG_ARCH_MMP)
-/*
- * each MFP pin will have a MFPR register, since the offset of the
- * register varies between processors, the processor specific code
- * should initialize the pin offsets by mfp_init()
- *
- * mfp_init_base() - accepts a virtual base for all MFPR registers and
- * initialize the MFP table to a default state
- *
- * mfp_init_addr() - accepts a table of "mfp_addr_map" structure, which
- * represents a range of MFP pins from "start" to "end", with the offset
- * beginning at "offset", to define a single pin, let "end" = -1.
- *
- * use
- *
- * MFP_ADDR_X() to define a range of pins
- * MFP_ADDR()   to define a single pin
- * MFP_ADDR_END to signal the end of pin offset definitions
- */
-struct mfp_addr_map {
-	unsigned int	start;
-	unsigned int	end;
-	unsigned long	offset;
-};
-
-#define MFP_ADDR_X(start, end, offset) \
-	{ MFP_PIN_##start, MFP_PIN_##end, offset }
-
-#define MFP_ADDR(pin, offset) \
-	{ MFP_PIN_##pin, -1, offset }
-
-#define MFP_ADDR_END	{ MFP_PIN_INVALID, 0 }
-
-void __init mfp_init_base(void __iomem *mfpr_base);
-void __init mfp_init_addr(struct mfp_addr_map *map);
-
-/*
- * mfp_{read, write}()	- for direct read/write access to the MFPR register
- * mfp_config()		- for configuring a group of MFPR registers
- * mfp_config_lpm()	- configuring all low power MFPR registers for suspend
- * mfp_config_run()	- configuring all run time  MFPR registers after resume
- */
-unsigned long mfp_read(int mfp);
-void mfp_write(int mfp, unsigned long mfpr_val);
-void mfp_config(unsigned long *mfp_cfgs, int num);
-void mfp_config_run(void);
-void mfp_config_lpm(void);
-#endif /* CONFIG_PXA3xx || CONFIG_ARCH_MMP */
-
-#endif /* __ASM_PLAT_MFP_H */
diff --git a/arch/arm/plat-pxa/mfp.c b/arch/arm/plat-pxa/mfp.c
deleted file mode 100644
index 17fc4f33f35b..000000000000
--- a/arch/arm/plat-pxa/mfp.c
+++ /dev/null
@@ -1,282 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/plat-pxa/mfp.c
- *
- *   Multi-Function Pin Support
- *
- * Copyright (C) 2007 Marvell Internation Ltd.
- *
- * 2007-08-21: eric miao <eric.miao@marvell.com>
- *             initial version
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <plat/mfp.h>
-
-#define MFPR_SIZE	(PAGE_SIZE)
-
-/* MFPR register bit definitions */
-#define MFPR_PULL_SEL		(0x1 << 15)
-#define MFPR_PULLUP_EN		(0x1 << 14)
-#define MFPR_PULLDOWN_EN	(0x1 << 13)
-#define MFPR_SLEEP_SEL		(0x1 << 9)
-#define MFPR_SLEEP_OE_N		(0x1 << 7)
-#define MFPR_EDGE_CLEAR		(0x1 << 6)
-#define MFPR_EDGE_FALL_EN	(0x1 << 5)
-#define MFPR_EDGE_RISE_EN	(0x1 << 4)
-
-#define MFPR_SLEEP_DATA(x)	((x) << 8)
-#define MFPR_DRIVE(x)		(((x) & 0x7) << 10)
-#define MFPR_AF_SEL(x)		(((x) & 0x7) << 0)
-
-#define MFPR_EDGE_NONE		(0)
-#define MFPR_EDGE_RISE		(MFPR_EDGE_RISE_EN)
-#define MFPR_EDGE_FALL		(MFPR_EDGE_FALL_EN)
-#define MFPR_EDGE_BOTH		(MFPR_EDGE_RISE | MFPR_EDGE_FALL)
-
-/*
- * Table that determines the low power modes outputs, with actual settings
- * used in parentheses for don't-care values. Except for the float output,
- * the configured driven and pulled levels match, so if there is a need for
- * non-LPM pulled output, the same configuration could probably be used.
- *
- * Output value  sleep_oe_n  sleep_data  pullup_en  pulldown_en  pull_sel
- *                 (bit 7)    (bit 8)    (bit 14)     (bit 13)   (bit 15)
- *
- * Input            0          X(0)        X(0)        X(0)       0
- * Drive 0          0          0           0           X(1)       0
- * Drive 1          0          1           X(1)        0	  0
- * Pull hi (1)      1          X(1)        1           0	  0
- * Pull lo (0)      1          X(0)        0           1	  0
- * Z (float)        1          X(0)        0           0	  0
- */
-#define MFPR_LPM_INPUT		(0)
-#define MFPR_LPM_DRIVE_LOW	(MFPR_SLEEP_DATA(0) | MFPR_PULLDOWN_EN)
-#define MFPR_LPM_DRIVE_HIGH    	(MFPR_SLEEP_DATA(1) | MFPR_PULLUP_EN)
-#define MFPR_LPM_PULL_LOW      	(MFPR_LPM_DRIVE_LOW  | MFPR_SLEEP_OE_N)
-#define MFPR_LPM_PULL_HIGH     	(MFPR_LPM_DRIVE_HIGH | MFPR_SLEEP_OE_N)
-#define MFPR_LPM_FLOAT         	(MFPR_SLEEP_OE_N)
-#define MFPR_LPM_MASK		(0xe080)
-
-/*
- * The pullup and pulldown state of the MFP pin at run mode is by default
- * determined by the selected alternate function. In case that some buggy
- * devices need to override this default behavior,  the definitions below
- * indicates the setting of corresponding MFPR bits
- *
- * Definition       pull_sel  pullup_en  pulldown_en
- * MFPR_PULL_NONE       0         0        0
- * MFPR_PULL_LOW        1         0        1
- * MFPR_PULL_HIGH       1         1        0
- * MFPR_PULL_BOTH       1         1        1
- * MFPR_PULL_FLOAT	1         0        0
- */
-#define MFPR_PULL_NONE		(0)
-#define MFPR_PULL_LOW		(MFPR_PULL_SEL | MFPR_PULLDOWN_EN)
-#define MFPR_PULL_BOTH		(MFPR_PULL_LOW | MFPR_PULLUP_EN)
-#define MFPR_PULL_HIGH		(MFPR_PULL_SEL | MFPR_PULLUP_EN)
-#define MFPR_PULL_FLOAT		(MFPR_PULL_SEL)
-
-/* mfp_spin_lock is used to ensure that MFP register configuration
- * (most likely a read-modify-write operation) is atomic, and that
- * mfp_table[] is consistent
- */
-static DEFINE_SPINLOCK(mfp_spin_lock);
-
-static void __iomem *mfpr_mmio_base;
-
-struct mfp_pin {
-	unsigned long	config;		/* -1 for not configured */
-	unsigned long	mfpr_off;	/* MFPRxx Register offset */
-	unsigned long	mfpr_run;	/* Run-Mode Register Value */
-	unsigned long	mfpr_lpm;	/* Low Power Mode Register Value */
-};
-
-static struct mfp_pin mfp_table[MFP_PIN_MAX];
-
-/* mapping of MFP_LPM_* definitions to MFPR_LPM_* register bits */
-static const unsigned long mfpr_lpm[] = {
-	MFPR_LPM_INPUT,
-	MFPR_LPM_DRIVE_LOW,
-	MFPR_LPM_DRIVE_HIGH,
-	MFPR_LPM_PULL_LOW,
-	MFPR_LPM_PULL_HIGH,
-	MFPR_LPM_FLOAT,
-	MFPR_LPM_INPUT,
-};
-
-/* mapping of MFP_PULL_* definitions to MFPR_PULL_* register bits */
-static const unsigned long mfpr_pull[] = {
-	MFPR_PULL_NONE,
-	MFPR_PULL_LOW,
-	MFPR_PULL_HIGH,
-	MFPR_PULL_BOTH,
-	MFPR_PULL_FLOAT,
-};
-
-/* mapping of MFP_LPM_EDGE_* definitions to MFPR_EDGE_* register bits */
-static const unsigned long mfpr_edge[] = {
-	MFPR_EDGE_NONE,
-	MFPR_EDGE_RISE,
-	MFPR_EDGE_FALL,
-	MFPR_EDGE_BOTH,
-};
-
-#define mfpr_readl(off)			\
-	__raw_readl(mfpr_mmio_base + (off))
-
-#define mfpr_writel(off, val)		\
-	__raw_writel(val, mfpr_mmio_base + (off))
-
-#define mfp_configured(p)	((p)->config != -1)
-
-/*
- * perform a read-back of any valid MFPR register to make sure the
- * previous writings are finished
- */
-static unsigned long mfpr_off_readback;
-#define mfpr_sync()	(void)__raw_readl(mfpr_mmio_base + mfpr_off_readback)
-
-static inline void __mfp_config_run(struct mfp_pin *p)
-{
-	if (mfp_configured(p))
-		mfpr_writel(p->mfpr_off, p->mfpr_run);
-}
-
-static inline void __mfp_config_lpm(struct mfp_pin *p)
-{
-	if (mfp_configured(p)) {
-		unsigned long mfpr_clr = (p->mfpr_run & ~MFPR_EDGE_BOTH) | MFPR_EDGE_CLEAR;
-		if (mfpr_clr != p->mfpr_run)
-			mfpr_writel(p->mfpr_off, mfpr_clr);
-		if (p->mfpr_lpm != mfpr_clr)
-			mfpr_writel(p->mfpr_off, p->mfpr_lpm);
-	}
-}
-
-void mfp_config(unsigned long *mfp_cfgs, int num)
-{
-	unsigned long flags;
-	int i;
-
-	spin_lock_irqsave(&mfp_spin_lock, flags);
-
-	for (i = 0; i < num; i++, mfp_cfgs++) {
-		unsigned long tmp, c = *mfp_cfgs;
-		struct mfp_pin *p;
-		int pin, af, drv, lpm, edge, pull;
-
-		pin = MFP_PIN(c);
-		BUG_ON(pin >= MFP_PIN_MAX);
-		p = &mfp_table[pin];
-
-		af  = MFP_AF(c);
-		drv = MFP_DS(c);
-		lpm = MFP_LPM_STATE(c);
-		edge = MFP_LPM_EDGE(c);
-		pull = MFP_PULL(c);
-
-		/* run-mode pull settings will conflict with MFPR bits of
-		 * low power mode state,  calculate mfpr_run and mfpr_lpm
-		 * individually if pull != MFP_PULL_NONE
-		 */
-		tmp = MFPR_AF_SEL(af) | MFPR_DRIVE(drv);
-
-		if (likely(pull == MFP_PULL_NONE)) {
-			p->mfpr_run = tmp | mfpr_lpm[lpm] | mfpr_edge[edge];
-			p->mfpr_lpm = p->mfpr_run;
-		} else {
-			p->mfpr_lpm = tmp | mfpr_lpm[lpm] | mfpr_edge[edge];
-			p->mfpr_run = tmp | mfpr_pull[pull];
-		}
-
-		p->config = c; __mfp_config_run(p);
-	}
-
-	mfpr_sync();
-	spin_unlock_irqrestore(&mfp_spin_lock, flags);
-}
-
-unsigned long mfp_read(int mfp)
-{
-	unsigned long val, flags;
-
-	BUG_ON(mfp < 0 || mfp >= MFP_PIN_MAX);
-
-	spin_lock_irqsave(&mfp_spin_lock, flags);
-	val = mfpr_readl(mfp_table[mfp].mfpr_off);
-	spin_unlock_irqrestore(&mfp_spin_lock, flags);
-
-	return val;
-}
-
-void mfp_write(int mfp, unsigned long val)
-{
-	unsigned long flags;
-
-	BUG_ON(mfp < 0 || mfp >= MFP_PIN_MAX);
-
-	spin_lock_irqsave(&mfp_spin_lock, flags);
-	mfpr_writel(mfp_table[mfp].mfpr_off, val);
-	mfpr_sync();
-	spin_unlock_irqrestore(&mfp_spin_lock, flags);
-}
-
-void __init mfp_init_base(void __iomem *mfpr_base)
-{
-	int i;
-
-	/* initialize the table with default - unconfigured */
-	for (i = 0; i < ARRAY_SIZE(mfp_table); i++)
-		mfp_table[i].config = -1;
-
-	mfpr_mmio_base = mfpr_base;
-}
-
-void __init mfp_init_addr(struct mfp_addr_map *map)
-{
-	struct mfp_addr_map *p;
-	unsigned long offset, flags;
-	int i;
-
-	spin_lock_irqsave(&mfp_spin_lock, flags);
-
-	/* mfp offset for readback */
-	mfpr_off_readback = map[0].offset;
-
-	for (p = map; p->start != MFP_PIN_INVALID; p++) {
-		offset = p->offset;
-		i = p->start;
-
-		do {
-			mfp_table[i].mfpr_off = offset;
-			mfp_table[i].mfpr_run = 0;
-			mfp_table[i].mfpr_lpm = 0;
-			offset += 4; i++;
-		} while ((i <= p->end) && (p->end != -1));
-	}
-
-	spin_unlock_irqrestore(&mfp_spin_lock, flags);
-}
-
-void mfp_config_lpm(void)
-{
-	struct mfp_pin *p = &mfp_table[0];
-	int pin;
-
-	for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++, p++)
-		__mfp_config_lpm(p);
-}
-
-void mfp_config_run(void)
-{
-	struct mfp_pin *p = &mfp_table[0];
-	int pin;
-
-	for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++, p++)
-		__mfp_config_run(p);
-}
diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c
deleted file mode 100644
index 563440315acd..000000000000
--- a/arch/arm/plat-pxa/ssp.c
+++ /dev/null
@@ -1,231 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-pxa/ssp.c
- *
- *  based on linux/arch/arm/mach-sa1100/ssp.c by Russell King
- *
- *  Copyright (C) 2003 Russell King.
- *  Copyright (C) 2003 Wolfson Microelectronics PLC
- *
- *  PXA2xx SSP driver.  This provides the generic core for simple
- *  IO-based SSP applications and allows easy port setup for DMA access.
- *
- *  Author: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/mutex.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-
-#include <asm/irq.h>
-
-static DEFINE_MUTEX(ssp_lock);
-static LIST_HEAD(ssp_list);
-
-struct ssp_device *pxa_ssp_request(int port, const char *label)
-{
-	struct ssp_device *ssp = NULL;
-
-	mutex_lock(&ssp_lock);
-
-	list_for_each_entry(ssp, &ssp_list, node) {
-		if (ssp->port_id == port && ssp->use_count == 0) {
-			ssp->use_count++;
-			ssp->label = label;
-			break;
-		}
-	}
-
-	mutex_unlock(&ssp_lock);
-
-	if (&ssp->node == &ssp_list)
-		return NULL;
-
-	return ssp;
-}
-EXPORT_SYMBOL(pxa_ssp_request);
-
-struct ssp_device *pxa_ssp_request_of(const struct device_node *of_node,
-				      const char *label)
-{
-	struct ssp_device *ssp = NULL;
-
-	mutex_lock(&ssp_lock);
-
-	list_for_each_entry(ssp, &ssp_list, node) {
-		if (ssp->of_node == of_node && ssp->use_count == 0) {
-			ssp->use_count++;
-			ssp->label = label;
-			break;
-		}
-	}
-
-	mutex_unlock(&ssp_lock);
-
-	if (&ssp->node == &ssp_list)
-		return NULL;
-
-	return ssp;
-}
-EXPORT_SYMBOL(pxa_ssp_request_of);
-
-void pxa_ssp_free(struct ssp_device *ssp)
-{
-	mutex_lock(&ssp_lock);
-	if (ssp->use_count) {
-		ssp->use_count--;
-		ssp->label = NULL;
-	} else
-		dev_err(ssp->dev, "device already free\n");
-	mutex_unlock(&ssp_lock);
-}
-EXPORT_SYMBOL(pxa_ssp_free);
-
-#ifdef CONFIG_OF
-static const struct of_device_id pxa_ssp_of_ids[] = {
-	{ .compatible = "mrvl,pxa25x-ssp",	.data = (void *) PXA25x_SSP },
-	{ .compatible = "mvrl,pxa25x-nssp",	.data = (void *) PXA25x_NSSP },
-	{ .compatible = "mrvl,pxa27x-ssp",	.data = (void *) PXA27x_SSP },
-	{ .compatible = "mrvl,pxa3xx-ssp",	.data = (void *) PXA3xx_SSP },
-	{ .compatible = "mvrl,pxa168-ssp",	.data = (void *) PXA168_SSP },
-	{ .compatible = "mrvl,pxa910-ssp",	.data = (void *) PXA910_SSP },
-	{ .compatible = "mrvl,ce4100-ssp",	.data = (void *) CE4100_SSP },
-	{ },
-};
-MODULE_DEVICE_TABLE(of, pxa_ssp_of_ids);
-#endif
-
-static int pxa_ssp_probe(struct platform_device *pdev)
-{
-	struct resource *res;
-	struct ssp_device *ssp;
-	struct device *dev = &pdev->dev;
-
-	ssp = devm_kzalloc(dev, sizeof(struct ssp_device), GFP_KERNEL);
-	if (ssp == NULL)
-		return -ENOMEM;
-
-	ssp->dev = dev;
-
-	ssp->clk = devm_clk_get(dev, NULL);
-	if (IS_ERR(ssp->clk))
-		return PTR_ERR(ssp->clk);
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (res == NULL) {
-		dev_err(dev, "no memory resource defined\n");
-		return -ENODEV;
-	}
-
-	res = devm_request_mem_region(dev, res->start, resource_size(res),
-				      pdev->name);
-	if (res == NULL) {
-		dev_err(dev, "failed to request memory resource\n");
-		return -EBUSY;
-	}
-
-	ssp->phys_base = res->start;
-
-	ssp->mmio_base = devm_ioremap(dev, res->start, resource_size(res));
-	if (ssp->mmio_base == NULL) {
-		dev_err(dev, "failed to ioremap() registers\n");
-		return -ENODEV;
-	}
-
-	ssp->irq = platform_get_irq(pdev, 0);
-	if (ssp->irq < 0) {
-		dev_err(dev, "no IRQ resource defined\n");
-		return -ENODEV;
-	}
-
-	if (dev->of_node) {
-		const struct of_device_id *id =
-			of_match_device(of_match_ptr(pxa_ssp_of_ids), dev);
-		ssp->type = (int) id->data;
-	} else {
-		const struct platform_device_id *id =
-			platform_get_device_id(pdev);
-		ssp->type = (int) id->driver_data;
-
-		/* PXA2xx/3xx SSP ports starts from 1 and the internal pdev->id
-		 * starts from 0, do a translation here
-		 */
-		ssp->port_id = pdev->id + 1;
-	}
-
-	ssp->use_count = 0;
-	ssp->of_node = dev->of_node;
-
-	mutex_lock(&ssp_lock);
-	list_add(&ssp->node, &ssp_list);
-	mutex_unlock(&ssp_lock);
-
-	platform_set_drvdata(pdev, ssp);
-
-	return 0;
-}
-
-static int pxa_ssp_remove(struct platform_device *pdev)
-{
-	struct ssp_device *ssp;
-
-	ssp = platform_get_drvdata(pdev);
-	if (ssp == NULL)
-		return -ENODEV;
-
-	mutex_lock(&ssp_lock);
-	list_del(&ssp->node);
-	mutex_unlock(&ssp_lock);
-
-	return 0;
-}
-
-static const struct platform_device_id ssp_id_table[] = {
-	{ "pxa25x-ssp",		PXA25x_SSP },
-	{ "pxa25x-nssp",	PXA25x_NSSP },
-	{ "pxa27x-ssp",		PXA27x_SSP },
-	{ "pxa3xx-ssp",		PXA3xx_SSP },
-	{ "pxa168-ssp",		PXA168_SSP },
-	{ "pxa910-ssp",		PXA910_SSP },
-	{ },
-};
-
-static struct platform_driver pxa_ssp_driver = {
-	.probe		= pxa_ssp_probe,
-	.remove		= pxa_ssp_remove,
-	.driver		= {
-		.name		= "pxa2xx-ssp",
-		.of_match_table	= of_match_ptr(pxa_ssp_of_ids),
-	},
-	.id_table	= ssp_id_table,
-};
-
-static int __init pxa_ssp_init(void)
-{
-	return platform_driver_register(&pxa_ssp_driver);
-}
-
-static void __exit pxa_ssp_exit(void)
-{
-	platform_driver_unregister(&pxa_ssp_driver);
-}
-
-arch_initcall(pxa_ssp_init);
-module_exit(pxa_ssp_exit);
-
-MODULE_DESCRIPTION("PXA SSP driver");
-MODULE_AUTHOR("Liam Girdwood");
-MODULE_LICENSE("GPL");
diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile
deleted file mode 100644
index 5de44a57c4de..000000000000
--- a/arch/arm/plat-versatile/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
-
-obj-$(CONFIG_SMP) += headsmp.o platsmp.o
-obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
diff --git a/arch/arm/probes/decode.h b/arch/arm/probes/decode.h
index 973173598992..facc889d05ee 100644
--- a/arch/arm/probes/decode.h
+++ b/arch/arm/probes/decode.h
@@ -14,6 +14,7 @@
 #include <linux/types.h>
 #include <linux/stddef.h>
 #include <asm/probes.h>
+#include <asm/ptrace.h>
 #include <asm/kprobes.h>
 
 void __init arm_probes_decode_init(void);
@@ -35,31 +36,6 @@ void __init find_str_pc_offset(void);
 #endif
 
 
-/*
- * Update ITSTATE after normal execution of an IT block instruction.
- *
- * The 8 IT state bits are split into two parts in CPSR:
- *	ITSTATE<1:0> are in CPSR<26:25>
- *	ITSTATE<7:2> are in CPSR<15:10>
- */
-static inline unsigned long it_advance(unsigned long cpsr)
-	{
-	if ((cpsr & 0x06000400) == 0) {
-		/* ITSTATE<2:0> == 0 means end of IT block, so clear IT state */
-		cpsr &= ~PSR_IT_MASK;
-	} else {
-		/* We need to shift left ITSTATE<4:0> */
-		const unsigned long mask = 0x06001c00;  /* Mask ITSTATE<4:0> */
-		unsigned long it = cpsr & mask;
-		it <<= 1;
-		it |= it >> (27 - 10);  /* Carry ITSTATE<2> to correct place */
-		it &= mask;
-		cpsr &= ~mask;
-		cpsr |= it;
-	}
-	return cpsr;
-}
-
 static inline void __kprobes bx_write_pc(long pcv, struct pt_regs *regs)
 {
 	long cpsr = regs->ARM_cpsr;
diff --git a/arch/arm/probes/kprobes/actions-common.c b/arch/arm/probes/kprobes/actions-common.c
index 836aebe596cd..79171344dbeb 100644
--- a/arch/arm/probes/kprobes/actions-common.c
+++ b/arch/arm/probes/kprobes/actions-common.c
@@ -84,7 +84,8 @@ emulate_generic_r0_12_noflags(probes_opcode_t insn,
 	register void *rfn asm("lr") = asi->insn_fn;
 
 	__asm__ __volatile__ (
-		"stmdb	sp!, {%[regs], r11}	\n\t"
+ARM(		"stmdb	sp!, {%[regs], r11}	\n\t"	)
+THUMB(		"stmdb	sp!, {%[regs], r7}	\n\t"	)
 		"ldmia	%[regs], {r0-r12}	\n\t"
 #if __LINUX_ARM_ARCH__ >= 6
 		"blx	%[fn]			\n\t"
@@ -96,10 +97,11 @@ emulate_generic_r0_12_noflags(probes_opcode_t insn,
 #endif
 		"ldr	lr, [sp], #4		\n\t" /* lr = regs */
 		"stmia	lr, {r0-r12}		\n\t"
-		"ldr	r11, [sp], #4		\n\t"
+ARM(		"ldr	r11, [sp], #4		\n\t"	)
+THUMB(		"ldr	r7, [sp], #4		\n\t"	)
 		: [regs] "=r" (rregs), [fn] "=r" (rfn)
 		: "0" (rregs), "1" (rfn)
-		: "r0", "r2", "r3", "r4", "r5", "r6", "r7",
+		: "r0", "r2", "r3", "r4", "r5", "r6", ARM("r7") THUMB("r11"),
 		  "r8", "r9", "r10", "r12", "memory", "cc"
 		);
 }
diff --git a/arch/arm/probes/kprobes/actions-thumb.c b/arch/arm/probes/kprobes/actions-thumb.c
index 7884fcb81c26..51624fc263fc 100644
--- a/arch/arm/probes/kprobes/actions-thumb.c
+++ b/arch/arm/probes/kprobes/actions-thumb.c
@@ -447,14 +447,16 @@ t16_emulate_loregs(probes_opcode_t insn,
 
 	__asm__ __volatile__ (
 		"msr	cpsr_fs, %[oldcpsr]	\n\t"
+		"mov	r11, r7			\n\t"
 		"ldmia	%[regs], {r0-r7}	\n\t"
 		"blx	%[fn]			\n\t"
 		"stmia	%[regs], {r0-r7}	\n\t"
+		"mov	r7, r11			\n\t"
 		"mrs	%[newcpsr], cpsr	\n\t"
 		: [newcpsr] "=r" (newcpsr)
 		: [oldcpsr] "r" (oldcpsr), [regs] "r" (regs),
 		  [fn] "r" (asi->insn_fn)
-		: "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
+		: "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r11",
 		  "lr", "memory", "cc"
 		);
 
@@ -524,14 +526,16 @@ t16_emulate_push(probes_opcode_t insn,
 		struct arch_probes_insn *asi, struct pt_regs *regs)
 {
 	__asm__ __volatile__ (
+		"mov	r11, r7			\n\t"
 		"ldr	r9, [%[regs], #13*4]	\n\t"
 		"ldr	r8, [%[regs], #14*4]	\n\t"
 		"ldmia	%[regs], {r0-r7}	\n\t"
 		"blx	%[fn]			\n\t"
 		"str	r9, [%[regs], #13*4]	\n\t"
+		"mov	r7, r11			\n\t"
 		:
 		: [regs] "r" (regs), [fn] "r" (asi->insn_fn)
-		: "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r8", "r9",
+		: "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r8", "r9", "r11",
 		  "lr", "memory", "cc"
 		);
 }
@@ -558,14 +562,16 @@ t16_emulate_pop_nopc(probes_opcode_t insn,
 		struct arch_probes_insn *asi, struct pt_regs *regs)
 {
 	__asm__ __volatile__ (
+		"mov	r11, r7			\n\t"
 		"ldr	r9, [%[regs], #13*4]	\n\t"
 		"ldmia	%[regs], {r0-r7}	\n\t"
 		"blx	%[fn]			\n\t"
 		"stmia	%[regs], {r0-r7}	\n\t"
 		"str	r9, [%[regs], #13*4]	\n\t"
+		"mov	r7, r11			\n\t"
 		:
 		: [regs] "r" (regs), [fn] "r" (asi->insn_fn)
-		: "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r9",
+		: "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r9", "r11",
 		  "lr", "memory", "cc"
 		);
 }
@@ -577,14 +583,16 @@ t16_emulate_pop_pc(probes_opcode_t insn,
 	register unsigned long pc asm("r8");
 
 	__asm__ __volatile__ (
+		"mov	r11, r7			\n\t"
 		"ldr	r9, [%[regs], #13*4]	\n\t"
 		"ldmia	%[regs], {r0-r7}	\n\t"
 		"blx	%[fn]			\n\t"
 		"stmia	%[regs], {r0-r7}	\n\t"
 		"str	r9, [%[regs], #13*4]	\n\t"
+		"mov	r7, r11			\n\t"
 		: "=r" (pc)
 		: [regs] "r" (regs), [fn] "r" (asi->insn_fn)
-		: "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r9",
+		: "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r9", "r11",
 		  "lr", "memory", "cc"
 		);
 
diff --git a/arch/arm/tools/Makefile b/arch/arm/tools/Makefile
index 4a5c50f67ced..81f13bdf32f2 100644
--- a/arch/arm/tools/Makefile
+++ b/arch/arm/tools/Makefile
@@ -29,8 +29,7 @@ kapi:	$(kapi-hdrs-y) $(gen-y)
 uapi:	$(uapi-hdrs-y)
 
 # Create output directory if not already present
-_dummy := $(shell [ -d '$(kapi)' ] || mkdir -p '$(kapi)') \
-          $(shell [ -d '$(uapi)' ] || mkdir -p '$(uapi)')
+$(shell mkdir -p $(kapi) $(uapi))
 
 quiet_cmd_gen_mach = GEN     $@
       cmd_gen_mach = $(AWK) -f $(real-prereqs) > $@
diff --git a/arch/arm/vdso/Makefile b/arch/arm/vdso/Makefile
index 7c9e395b77f7..8ca1c9f262a2 100644
--- a/arch/arm/vdso/Makefile
+++ b/arch/arm/vdso/Makefile
@@ -18,7 +18,7 @@ ccflags-y += -DDISABLE_BRANCH_PROFILING -DBUILD_VDSO32
 
 ldflags-$(CONFIG_CPU_ENDIAN_BE8) := --be8
 ldflags-y := -Bsymbolic --no-undefined -soname=linux-vdso.so.1 \
-	    -z max-page-size=4096 -nostdlib -shared $(ldflags-y) \
+	    -z max-page-size=4096 -shared $(ldflags-y) \
 	    --hash-style=sysv --build-id=sha1 \
 	    -T
 
@@ -28,7 +28,7 @@ CPPFLAGS_vdso.lds += -P -C -U$(ARCH)
 CFLAGS_REMOVE_vdso.o = -pg
 
 # Force -O2 to avoid libgcc dependencies
-CFLAGS_REMOVE_vgettimeofday.o = -pg -Os $(GCC_PLUGINS_CFLAGS)
+CFLAGS_REMOVE_vgettimeofday.o = -pg -Os $(RANDSTRUCT_CFLAGS) $(GCC_PLUGINS_CFLAGS)
 ifeq ($(c-gettimeofday-y),)
 CFLAGS_vgettimeofday.o = -O2
 else
diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c
index ec5b082f3de6..93c8ccbf2982 100644
--- a/arch/arm/xen/enlighten.c
+++ b/arch/arm/xen/enlighten.c
@@ -34,6 +34,7 @@
 #include <linux/timekeeping.h>
 #include <linux/timekeeper_internal.h>
 #include <linux/acpi.h>
+#include <linux/virtio_anchor.h>
 
 #include <linux/mm.h>
 
@@ -337,12 +338,15 @@ int __init arch_xen_unpopulated_init(struct resource **res)
 
 	if (!nr_reg) {
 		pr_err("No extended regions are found\n");
+		of_node_put(np);
 		return -EINVAL;
 	}
 
 	regs = kcalloc(nr_reg, sizeof(*regs), GFP_KERNEL);
-	if (!regs)
+	if (!regs) {
+		of_node_put(np);
 		return -ENOMEM;
+	}
 
 	/*
 	 * Create resource from extended regions provided by the hypervisor to be
@@ -403,8 +407,8 @@ int __init arch_xen_unpopulated_init(struct resource **res)
 	*res = &xen_resource;
 
 err:
+	of_node_put(np);
 	kfree(regs);
-
 	return rc;
 }
 #endif
@@ -424,8 +428,10 @@ static void __init xen_dt_guest_init(void)
 
 	if (of_address_to_resource(xen_node, GRANT_TABLE_INDEX, &res)) {
 		pr_err("Xen grant table region is not found\n");
+		of_node_put(xen_node);
 		return;
 	}
+	of_node_put(xen_node);
 	xen_grant_frames = res.start;
 }
 
@@ -438,6 +444,9 @@ static int __init xen_guest_init(void)
 	if (!xen_domain())
 		return 0;
 
+	if (IS_ENABLED(CONFIG_XEN_VIRTIO))
+		virtio_set_mem_acc_cb(xen_virtio_mem_acc);
+
 	if (!acpi_disabled)
 		xen_acpi_guest_init();
 	else
diff --git a/arch/arm/xen/mm.c b/arch/arm/xen/mm.c
index a7e54a087b80..3d826c0b5fee 100644
--- a/arch/arm/xen/mm.c
+++ b/arch/arm/xen/mm.c
@@ -23,22 +23,20 @@
 #include <asm/xen/hypercall.h>
 #include <asm/xen/interface.h>
 
-unsigned long xen_get_swiotlb_free_pages(unsigned int order)
+static gfp_t xen_swiotlb_gfp(void)
 {
 	phys_addr_t base;
-	gfp_t flags = __GFP_NOWARN|__GFP_KSWAPD_RECLAIM;
 	u64 i;
 
 	for_each_mem_range(i, &base, NULL) {
 		if (base < (phys_addr_t)0xffffffff) {
 			if (IS_ENABLED(CONFIG_ZONE_DMA32))
-				flags |= __GFP_DMA32;
-			else
-				flags |= __GFP_DMA;
-			break;
+				return __GFP_DMA32;
+			return __GFP_DMA;
 		}
 	}
-	return __get_free_pages(flags, order);
+
+	return GFP_KERNEL;
 }
 
 static bool hypercall_cflush = false;
@@ -118,23 +116,6 @@ bool xen_arch_need_swiotlb(struct device *dev,
 		!dev_is_dma_coherent(dev));
 }
 
-int xen_create_contiguous_region(phys_addr_t pstart, unsigned int order,
-				 unsigned int address_bits,
-				 dma_addr_t *dma_handle)
-{
-	if (!xen_initial_domain())
-		return -EINVAL;
-
-	/* we assume that dom0 is mapped 1:1 for now */
-	*dma_handle = pstart;
-	return 0;
-}
-
-void xen_destroy_contiguous_region(phys_addr_t pstart, unsigned int order)
-{
-	return;
-}
-
 static int __init xen_mm_init(void)
 {
 	struct gnttab_cache_flush cflush;
@@ -143,10 +124,13 @@ static int __init xen_mm_init(void)
 	if (!xen_swiotlb_detect())
 		return 0;
 
-	rc = xen_swiotlb_init();
 	/* we can work with the default swiotlb */
-	if (rc < 0 && rc != -EEXIST)
-		return rc;
+	if (!io_tlb_default_mem.nslabs) {
+		rc = swiotlb_init_late(swiotlb_size_or_default(),
+				       xen_swiotlb_gfp(), NULL);
+		if (rc < 0)
+			return rc;
+	}
 
 	cflush.op = 0;
 	cflush.a.dev_bus_addr = 0;
diff --git a/arch/arm/xen/p2m.c b/arch/arm/xen/p2m.c
index 84a1cea1f43b..309648c17f48 100644
--- a/arch/arm/xen/p2m.c
+++ b/arch/arm/xen/p2m.c
@@ -63,11 +63,12 @@ out:
 
 unsigned long __pfn_to_mfn(unsigned long pfn)
 {
-	struct rb_node *n = phys_to_mach.rb_node;
+	struct rb_node *n;
 	struct xen_p2m_entry *entry;
 	unsigned long irqflags;
 
 	read_lock_irqsave(&p2m_lock, irqflags);
+	n = phys_to_mach.rb_node;
 	while (n) {
 		entry = rb_entry(n, struct xen_p2m_entry, rbnode_phys);
 		if (entry->pfn <= pfn &&
@@ -152,10 +153,11 @@ bool __set_phys_to_machine_multi(unsigned long pfn,
 	int rc;
 	unsigned long irqflags;
 	struct xen_p2m_entry *p2m_entry;
-	struct rb_node *n = phys_to_mach.rb_node;
+	struct rb_node *n;
 
 	if (mfn == INVALID_P2M_ENTRY) {
 		write_lock_irqsave(&p2m_lock, irqflags);
+		n = phys_to_mach.rb_node;
 		while (n) {
 			p2m_entry = rb_entry(n, struct xen_p2m_entry, rbnode_phys);
 			if (p2m_entry->pfn <= pfn &&