arm64: dts: qcom: sc7280-villager: Adjust LTE SKUs

There have been a few changes since the patch ("arm64: dts: qcom: Add
LTE SKUs for sc7280-villager family")
* New firmware reports LTE boards as "SKU 512" now. Old firmware will
  still report "SKU 0", but that's all pre-production and everyone
  will update.
* It's been relaized that no "-rev0" boards were ever built that were
  WiFi-only. Thus we don't two entries for -rev0.

Adjust the organization a bit.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220829084732.2.I22e256d1ebac577a91fac44d1d12919be7111cd4@changeid

1 files changed, 2 insertions, 319 deletions

diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts
index cbd8a2d1ef2a..73e24cc55a09 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts
@@ -7,327 +7,10 @@
 
 /dts-v1/;
 
-#include "sc7280-herobrine.dtsi"
+#include "sc7280-herobrine-villager.dtsi"
+#include "sc7280-herobrine-lte-sku.dtsi"
 
 / {
 	model = "Google Villager (rev0)";
 	compatible = "google,villager-rev0", "qcom,sc7280";
 };
-
-/*
- * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES
- *
- * Sort order matches the order in the parent files (parents before children).
- */
-
-&pp3300_codec {
-	status = "okay";
-};
-
-/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
-
-ap_tp_i2c: &i2c0 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	trackpad: trackpad@2c {
-		compatible = "hid-over-i2c";
-		reg = <0x2c>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tp_int_odl>;
-
-		interrupt-parent = <&tlmm>;
-		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
-
-		hid-descr-addr = <0x20>;
-		vcc-supply = <&pp3300_z1>;
-
-		wakeup-source;
-	};
-};
-
-ts_i2c: &i2c13 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	ap_ts: touchscreen@10 {
-		compatible = "elan,ekth6915";
-		reg = <0x10>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>;
-
-		interrupt-parent = <&tlmm>;
-		interrupts = <55 IRQ_TYPE_LEVEL_LOW>;
-
-		reset-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
-
-		vcc33-supply = <&ts_avdd>;
-	};
-};
-
-&ap_sar_sensor_i2c {
-	status = "okay";
-};
-
-&ap_sar_sensor0 {
-	status = "okay";
-};
-
-&ap_sar_sensor1 {
-	status = "okay";
-};
-
-&mdss_edp {
-	status = "okay";
-};
-
-&mdss_edp_phy {
-	status = "okay";
-};
-
-/* For nvme */
-&pcie1 {
-	status = "okay";
-};
-
-/* For nvme */
-&pcie1_phy {
-	status = "okay";
-};
-
-&pwmleds {
-	status = "okay";
-};
-
-/* For eMMC */
-&sdhc_1 {
-	status = "okay";
-};
-
-/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */
-
-&ts_rst_conn {
-	bias-disable;
-};
-
-/* PINCTRL - BOARD-SPECIFIC */
-
-/*
- * Methodology for gpio-line-names:
- * - If a pin goes to herobrine board and is named it gets that name.
- * - If a pin goes to herobrine board and is not named, it gets no name.
- * - If a pin is totally internal to Qcard then it gets Qcard name.
- * - If a pin is not hooked up on Qcard, it gets no name.
- */
-
-&pm8350c_gpios {
-	gpio-line-names = "FLASH_STROBE_1",		/* 1 */
-			  "AP_SUSPEND",
-			  "PM8008_1_RST_N",
-			  "",
-			  "",
-			  "",
-			  "PMIC_EDP_BL_EN",
-			  "PMIC_EDP_BL_PWM",
-			  "";
-};
-
-&tlmm {
-	gpio-line-names = "AP_TP_I2C_SDA",		/* 0 */
-			  "AP_TP_I2C_SCL",
-			  "SSD_RST_L",
-			  "PE_WAKE_ODL",
-			  "AP_SAR_SDA",
-			  "AP_SAR_SCL",
-			  "PRB_SC_GPIO_6",
-			  "TP_INT_ODL",
-			  "HP_I2C_SDA",
-			  "HP_I2C_SCL",
-
-			  "GNSS_L1_EN",			/* 10 */
-			  "GNSS_L5_EN",
-			  "SPI_AP_MOSI",
-			  "SPI_AP_MISO",
-			  "SPI_AP_CLK",
-			  "SPI_AP_CS0_L",
-			  /*
-			   * AP_FLASH_WP is crossystem ABI. Schematics
-			   * call it BIOS_FLASH_WP_OD.
-			   */
-			  "AP_FLASH_WP",
-			  "",
-			  "AP_EC_INT_L",
-			  "",
-
-			  "UF_CAM_RST_L",		/* 20 */
-			  "WF_CAM_RST_L",
-			  "UART_AP_TX_DBG_RX",
-			  "UART_DBG_TX_AP_RX",
-			  "",
-			  "PM8008_IRQ_1",
-			  "HOST2WLAN_SOL",
-			  "WLAN2HOST_SOL",
-			  "MOS_BT_UART_CTS",
-			  "MOS_BT_UART_RFR",
-
-			  "MOS_BT_UART_TX",		/* 30 */
-			  "MOS_BT_UART_RX",
-			  "PRB_SC_GPIO_32",
-			  "HUB_RST_L",
-			  "",
-			  "",
-			  "AP_SPI_FP_MISO",
-			  "AP_SPI_FP_MOSI",
-			  "AP_SPI_FP_CLK",
-			  "AP_SPI_FP_CS_L",
-
-			  "AP_EC_SPI_MISO",		/* 40 */
-			  "AP_EC_SPI_MOSI",
-			  "AP_EC_SPI_CLK",
-			  "AP_EC_SPI_CS_L",
-			  "LCM_RST_L",
-			  "EARLY_EUD_N",
-			  "",
-			  "DP_HOT_PLUG_DET",
-			  "IO_BRD_MLB_ID0",
-			  "IO_BRD_MLB_ID1",
-
-			  "IO_BRD_MLB_ID2",		/* 50 */
-			  "SSD_EN",
-			  "TS_I2C_SDA_CONN",
-			  "TS_I2C_CLK_CONN",
-			  "TS_RST_CONN",
-			  "TS_INT_CONN",
-			  "AP_I2C_TPM_SDA",
-			  "AP_I2C_TPM_SCL",
-			  "PRB_SC_GPIO_58",
-			  "PRB_SC_GPIO_59",
-
-			  "EDP_HOT_PLUG_DET_N",		/* 60 */
-			  "FP_TO_AP_IRQ_L",
-			  "",
-			  "AMP_EN",
-			  "CAM0_MCLK_GPIO_64",
-			  "CAM1_MCLK_GPIO_65",
-			  "WF_CAM_MCLK",
-			  "PRB_SC_GPIO_67",
-			  "FPMCU_BOOT0",
-			  "UF_CAM_SDA",
-
-			  "UF_CAM_SCL",			/* 70 */
-			  "",
-			  "",
-			  "WF_CAM_SDA",
-			  "WF_CAM_SCL",
-			  "",
-			  "",
-			  "EN_FP_RAILS",
-			  "FP_RST_L",
-			  "PCIE1_CLKREQ_ODL",
-
-			  "EN_PP3300_DX_EDP",		/* 80 */
-			  "SC_GPIO_81",
-			  "FORCED_USB_BOOT",
-			  "WCD_RESET_N",
-			  "MOS_WLAN_EN",
-			  "MOS_BT_EN",
-			  "MOS_SW_CTRL",
-			  "MOS_PCIE0_RST",
-			  "MOS_PCIE0_CLKREQ_N",
-			  "MOS_PCIE0_WAKE_N",
-
-			  "MOS_LAA_AS_EN",		/* 90 */
-			  "SD_CD_ODL",
-			  "",
-			  "",
-			  "MOS_BT_WLAN_SLIMBUS_CLK",
-			  "MOS_BT_WLAN_SLIMBUS_DAT0",
-			  "HP_MCLK",
-			  "HP_BCLK",
-			  "HP_DOUT",
-			  "HP_DIN",
-
-			  "HP_LRCLK",			/* 100 */
-			  "HP_IRQ",
-			  "",
-			  "",
-			  "GSC_AP_INT_ODL",
-			  "EN_PP3300_CODEC",
-			  "AMP_BCLK",
-			  "AMP_DIN",
-			  "AMP_LRCLK",
-			  "UIM1_DATA_GPIO_109",
-
-			  "UIM1_CLK_GPIO_110",		/* 110 */
-			  "UIM1_RESET_GPIO_111",
-			  "PRB_SC_GPIO_112",
-			  "UIM0_DATA",
-			  "UIM0_CLK",
-			  "UIM0_RST",
-			  "UIM0_PRESENT_ODL",
-			  "SDM_RFFE0_CLK",
-			  "SDM_RFFE0_DATA",
-			  "WF_CAM_EN",
-
-			  "FASTBOOT_SEL_0",		/* 120 */
-			  "SC_GPIO_121",
-			  "FASTBOOT_SEL_1",
-			  "SC_GPIO_123",
-			  "FASTBOOT_SEL_2",
-			  "SM_RFFE4_CLK_GRFC_8",
-			  "SM_RFFE4_DATA_GRFC_9",
-			  "WLAN_COEX_UART1_RX",
-			  "WLAN_COEX_UART1_TX",
-			  "PRB_SC_GPIO_129",
-
-			  "LCM_ID0",			/* 130 */
-			  "LCM_ID1",
-			  "",
-			  "SDR_QLINK_REQ",
-			  "SDR_QLINK_EN",
-			  "QLINK0_WMSS_RESET_N",
-			  "SMR526_QLINK1_REQ",
-			  "SMR526_QLINK1_EN",
-			  "SMR526_QLINK1_WMSS_RESET_N",
-			  "PRB_SC_GPIO_139",
-
-			  "SAR1_IRQ_ODL",		/* 140 */
-			  "SAR0_IRQ_ODL",
-			  "PRB_SC_GPIO_142",
-			  "",
-			  "WCD_SWR_TX_CLK",
-			  "WCD_SWR_TX_DATA0",
-			  "WCD_SWR_TX_DATA1",
-			  "WCD_SWR_RX_CLK",
-			  "WCD_SWR_RX_DATA0",
-			  "WCD_SWR_RX_DATA1",
-
-			  "DMIC01_CLK",			/* 150 */
-			  "DMIC01_DATA",
-			  "DMIC23_CLK",
-			  "DMIC23_DATA",
-			  "",
-			  "",
-			  "EC_IN_RW_ODL",
-			  "HUB_EN",
-			  "WCD_SWR_TX_DATA2",
-			  "",
-
-			  "",				/* 160 */
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-
-			  "",				/* 170 */
-			  "MOS_BLE_UART_TX",
-			  "MOS_BLE_UART_RX",
-			  "",
-			  "",
-			  "";
-};