[ARM] kirkwood: fix PCI I/O port assignment

Instead of allocating PCI devices I/O port bus addresses from the
000xxxxx I/O port range as intended, due to a bus versus physical
address mixup, the Kirkwood PCIe handling code inadvertently
allocated I/O port bus addresses from the f20xxxxx address range
(which is the physical address range of the PCIe I/O mapping window),
but then direct all I/O port accesses to bus addresses 000xxxxx,
which would then not be decoded at all.

Fix this by setting the base address of the PCIe I/O space struct
resource to KIRKWOOD_PCIE_IO_BUS_BASE instead of the incorrect
KIRKWOOD_PCIE_IO_PHYS_BASE, and fix up __io() to expect addresses
offsetted by the former instead of the latter.

(The suggested fix of directing I/O port accesses from the host to
bus addresses f20xxxxx instead has the problem that assigning full
32bit I/O port bus addresses (f20xxxxx) doesn't work on all PCI
devices, as not all PCI devices implement full 32 bit BAR registers
for I/O ports.  We should really try to allocate I/O port bus
addresses that fit in 16 bits.)

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>

2 files changed, 2 insertions, 2 deletions

diff --git a/arch/arm/mach-kirkwood/include/mach/io.h b/arch/arm/mach-kirkwood/include/mach/io.h
index a643a846d5fb..44e8be04f259 100644
--- a/arch/arm/mach-kirkwood/include/mach/io.h
+++ b/arch/arm/mach-kirkwood/include/mach/io.h
@@ -15,7 +15,7 @@
 
 static inline void __iomem *__io(unsigned long addr)
 {
-	return (void __iomem *)((addr - KIRKWOOD_PCIE_IO_PHYS_BASE)
+	return (void __iomem *)((addr - KIRKWOOD_PCIE_IO_BUS_BASE)
 					+ KIRKWOOD_PCIE_IO_VIRT_BASE);
 }
 
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index 553882033006..0660e78641e8 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -115,7 +115,7 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
 	 */
 	res[0].name = "PCIe I/O Space";
 	res[0].flags = IORESOURCE_IO;
-	res[0].start = KIRKWOOD_PCIE_IO_PHYS_BASE;
+	res[0].start = KIRKWOOD_PCIE_IO_BUS_BASE;
 	res[0].end = res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1;
 	if (request_resource(&ioport_resource, &res[0]))
 		panic("Request PCIe IO resource failed\n");