ARM: imx: Remove i.MX35 board files

i.MX35 has basic device tree support.

To achieve the goal of converting all i.MX SoCs to a
devicetree-only platform, remove imx35 board files.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

1 files changed, 0 insertions, 412 deletions

diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
deleted file mode 100644
index 017a50113005..000000000000
--- a/arch/arm/mach-imx/mach-pcm043.c
+++ /dev/null
@@ -1,412 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- *  Copyright (C) 2009 Sascha Hauer, Pengutronix
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/memory.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/smc911x.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/property.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices-imx35.h"
-#include "ehci.h"
-#include "hardware.h"
-#include "iomux-mx35.h"
-#include "ulpi.h"
-
-static const struct fb_videomode fb_modedb[] = {
-	{
-		/* 240x320 @ 60 Hz */
-		.name		= "Sharp-LQ035Q7",
-		.refresh	= 60,
-		.xres		= 240,
-		.yres		= 320,
-		.pixclock	= 185925,
-		.left_margin	= 9,
-		.right_margin	= 16,
-		.upper_margin	= 7,
-		.lower_margin	= 9,
-		.hsync_len	= 1,
-		.vsync_len	= 1,
-		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	}, {
-		/* 240x320 @ 60 Hz */
-		.name		= "TX090",
-		.refresh	= 60,
-		.xres		= 240,
-		.yres		= 320,
-		.pixclock	= 38255,
-		.left_margin	= 144,
-		.right_margin	= 0,
-		.upper_margin	= 7,
-		.lower_margin	= 40,
-		.hsync_len	= 96,
-		.vsync_len	= 1,
-		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	},
-};
-
-static struct mx3fb_platform_data mx3fb_pdata __initdata = {
-	.name		= "Sharp-LQ035Q7",
-	.mode		= fb_modedb,
-	.num_modes	= ARRAY_SIZE(fb_modedb),
-};
-
-static struct physmap_flash_data pcm043_flash_data = {
-	.width  = 2,
-};
-
-static struct resource pcm043_flash_resource = {
-	.start	= 0xa0000000,
-	.end	= 0xa1ffffff,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device pcm043_flash = {
-	.name	= "physmap-flash",
-	.id	= 0,
-	.dev	= {
-		.platform_data  = &pcm043_flash_data,
-	},
-	.resource = &pcm043_flash_resource,
-	.num_resources = 1,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct imxi2c_platform_data pcm043_i2c0_data __initconst = {
-	.bitrate = 50000,
-};
-
-static const struct property_entry board_eeprom_properties[] = {
-	PROPERTY_ENTRY_U32("pagesize", 32),
-	{ }
-};
-
-static struct i2c_board_info pcm043_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("24c32", 0x52), /* E0=0, E1=1, E2=0 */
-		.properties = board_eeprom_properties,
-	}, {
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	},
-};
-
-static struct platform_device *devices[] __initdata = {
-	&pcm043_flash,
-};
-
-static const iomux_v3_cfg_t pcm043_pads[] __initconst = {
-	/* UART1 */
-	MX35_PAD_CTS1__UART1_CTS,
-	MX35_PAD_RTS1__UART1_RTS,
-	MX35_PAD_TXD1__UART1_TXD_MUX,
-	MX35_PAD_RXD1__UART1_RXD_MUX,
-	/* UART2 */
-	MX35_PAD_CTS2__UART2_CTS,
-	MX35_PAD_RTS2__UART2_RTS,
-	MX35_PAD_TXD2__UART2_TXD_MUX,
-	MX35_PAD_RXD2__UART2_RXD_MUX,
-	/* FEC */
-	MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
-	MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
-	MX35_PAD_FEC_RX_DV__FEC_RX_DV,
-	MX35_PAD_FEC_COL__FEC_COL,
-	MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
-	MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
-	MX35_PAD_FEC_TX_EN__FEC_TX_EN,
-	MX35_PAD_FEC_MDC__FEC_MDC,
-	MX35_PAD_FEC_MDIO__FEC_MDIO,
-	MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
-	MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
-	MX35_PAD_FEC_CRS__FEC_CRS,
-	MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
-	MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
-	MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
-	MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
-	MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
-	MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
-	/* I2C1 */
-	MX35_PAD_I2C1_CLK__I2C1_SCL,
-	MX35_PAD_I2C1_DAT__I2C1_SDA,
-	/* Display */
-	MX35_PAD_LD0__IPU_DISPB_DAT_0,
-	MX35_PAD_LD1__IPU_DISPB_DAT_1,
-	MX35_PAD_LD2__IPU_DISPB_DAT_2,
-	MX35_PAD_LD3__IPU_DISPB_DAT_3,
-	MX35_PAD_LD4__IPU_DISPB_DAT_4,
-	MX35_PAD_LD5__IPU_DISPB_DAT_5,
-	MX35_PAD_LD6__IPU_DISPB_DAT_6,
-	MX35_PAD_LD7__IPU_DISPB_DAT_7,
-	MX35_PAD_LD8__IPU_DISPB_DAT_8,
-	MX35_PAD_LD9__IPU_DISPB_DAT_9,
-	MX35_PAD_LD10__IPU_DISPB_DAT_10,
-	MX35_PAD_LD11__IPU_DISPB_DAT_11,
-	MX35_PAD_LD12__IPU_DISPB_DAT_12,
-	MX35_PAD_LD13__IPU_DISPB_DAT_13,
-	MX35_PAD_LD14__IPU_DISPB_DAT_14,
-	MX35_PAD_LD15__IPU_DISPB_DAT_15,
-	MX35_PAD_LD16__IPU_DISPB_DAT_16,
-	MX35_PAD_LD17__IPU_DISPB_DAT_17,
-	MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
-	MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
-	MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
-	MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
-	MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
-	MX35_PAD_D3_REV__IPU_DISPB_D3_REV,
-	MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
-	/* gpio */
-	MX35_PAD_ATA_CS0__GPIO2_6,
-	/* USB host */
-	MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR,
-	MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC,
-	/* SSI */
-	MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS,
-	MX35_PAD_STXD4__AUDMUX_AUD4_TXD,
-	MX35_PAD_SRXD4__AUDMUX_AUD4_RXD,
-	MX35_PAD_SCK4__AUDMUX_AUD4_TXC,
-	/* CAN2 */
-	MX35_PAD_TX5_RX0__CAN2_TXCAN,
-	MX35_PAD_TX4_RX1__CAN2_RXCAN,
-	/* esdhc */
-	MX35_PAD_SD1_CMD__ESDHC1_CMD,
-	MX35_PAD_SD1_CLK__ESDHC1_CLK,
-	MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
-	MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
-	MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
-	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
-	MX35_PAD_ATA_DATA10__GPIO2_23, /* WriteProtect */
-	MX35_PAD_ATA_DATA11__GPIO2_24, /* CardDetect */
-};
-
-#define AC97_GPIO_TXFS	IMX_GPIO_NR(2, 31)
-#define AC97_GPIO_TXD	IMX_GPIO_NR(2, 28)
-#define AC97_GPIO_RESET	IMX_GPIO_NR(2, 0)
-
-static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97)
-{
-	iomux_v3_cfg_t txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
-	iomux_v3_cfg_t txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
-	int ret;
-
-	ret = gpio_request(AC97_GPIO_TXFS, "SSI");
-	if (ret) {
-		printk("failed to get GPIO_TXFS: %d\n", ret);
-		return;
-	}
-
-	mxc_iomux_v3_setup_pad(txfs_gpio);
-
-	/* warm reset */
-	gpio_direction_output(AC97_GPIO_TXFS, 1);
-	udelay(2);
-	gpio_set_value(AC97_GPIO_TXFS, 0);
-
-	gpio_free(AC97_GPIO_TXFS);
-	mxc_iomux_v3_setup_pad(txfs);
-}
-
-static void pcm043_ac97_cold_reset(struct snd_ac97 *ac97)
-{
-	iomux_v3_cfg_t txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
-	iomux_v3_cfg_t txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
-	iomux_v3_cfg_t txd_gpio = MX35_PAD_STXD4__GPIO2_28;
-	iomux_v3_cfg_t txd = MX35_PAD_STXD4__AUDMUX_AUD4_TXD;
-	iomux_v3_cfg_t reset_gpio = MX35_PAD_SD2_CMD__GPIO2_0;
-	int ret;
-
-	ret = gpio_request(AC97_GPIO_TXFS, "SSI");
-	if (ret)
-		goto err1;
-
-	ret = gpio_request(AC97_GPIO_TXD, "SSI");
-	if (ret)
-		goto err2;
-
-	ret = gpio_request(AC97_GPIO_RESET, "SSI");
-	if (ret)
-		goto err3;
-
-	mxc_iomux_v3_setup_pad(txfs_gpio);
-	mxc_iomux_v3_setup_pad(txd_gpio);
-	mxc_iomux_v3_setup_pad(reset_gpio);
-
-	gpio_direction_output(AC97_GPIO_TXFS, 0);
-	gpio_direction_output(AC97_GPIO_TXD, 0);
-
-	/* cold reset */
-	gpio_direction_output(AC97_GPIO_RESET, 0);
-	udelay(10);
-	gpio_direction_output(AC97_GPIO_RESET, 1);
-
-	mxc_iomux_v3_setup_pad(txd);
-	mxc_iomux_v3_setup_pad(txfs);
-
-	gpio_free(AC97_GPIO_RESET);
-err3:
-	gpio_free(AC97_GPIO_TXD);
-err2:
-	gpio_free(AC97_GPIO_TXFS);
-err1:
-	if (ret)
-		printk("%s failed with %d\n", __func__, ret);
-	mdelay(1);
-}
-
-static const struct imx_ssi_platform_data pcm043_ssi_pdata __initconst = {
-	.ac97_reset = pcm043_ac97_cold_reset,
-	.ac97_warm_reset = pcm043_ac97_warm_reset,
-	.flags = IMX_SSI_USE_AC97,
-};
-
-static const struct mxc_nand_platform_data
-pcm037_nand_board_info __initconst = {
-	.width = 1,
-	.hw_ecc = 1,
-};
-
-static int pcm043_otg_init(struct platform_device *pdev)
-{
-	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static struct mxc_usbh_platform_data otg_pdata __initdata = {
-	.init	= pcm043_otg_init,
-	.portsc	= MXC_EHCI_MODE_UTMI,
-};
-
-static int pcm043_usbh1_init(struct platform_device *pdev)
-{
-	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
-			MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN);
-}
-
-static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
-	.init	= pcm043_usbh1_init,
-	.portsc	= MXC_EHCI_MODE_SERIAL,
-};
-
-static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
-	.operating_mode = FSL_USB2_DR_DEVICE,
-	.phy_mode       = FSL_USB2_PHY_UTMI,
-};
-
-static bool otg_mode_host __initdata;
-
-static int __init pcm043_otg_mode(char *options)
-{
-	if (!strcmp(options, "host"))
-		otg_mode_host = true;
-	else if (!strcmp(options, "device"))
-		otg_mode_host = false;
-	else
-		pr_info("otg_mode neither \"host\" nor \"device\". "
-			"Defaulting to device\n");
-	return 1;
-}
-__setup("otg_mode=", pcm043_otg_mode);
-
-static struct esdhc_platform_data sd1_pdata = {
-	.wp_type = ESDHC_WP_GPIO,
-	.cd_type = ESDHC_CD_GPIO,
-};
-
-static struct gpiod_lookup_table sd1_gpio_table = {
-	.dev_id = "sdhci-esdhc-imx35.0",
-	.table = {
-		/* Card detect: bank 2 offset 24 */
-		GPIO_LOOKUP("imx35-gpio.2", 24, "cd", GPIO_ACTIVE_LOW),
-		/* Write protect: bank 2 offset 23 */
-		GPIO_LOOKUP("imx35-gpio.2", 23, "wp", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-/*
- * Board specific initialization.
- */
-static void __init pcm043_init(void)
-{
-	imx35_soc_init();
-
-	mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads));
-
-	imx35_add_fec(NULL);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	imx35_add_imx2_wdt();
-
-	imx35_add_imx_uart0(&uart_pdata);
-	imx35_add_mxc_nand(&pcm037_nand_board_info);
-
-	imx35_add_imx_uart1(&uart_pdata);
-
-	i2c_register_board_info(0, pcm043_i2c_devices,
-			ARRAY_SIZE(pcm043_i2c_devices));
-
-	imx35_add_imx_i2c0(&pcm043_i2c0_data);
-
-	imx35_add_ipu_core();
-	imx35_add_mx3_sdc_fb(&mx3fb_pdata);
-
-	if (otg_mode_host) {
-		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-				ULPI_OTG_DRVVBUS_EXT);
-		if (otg_pdata.otg)
-			imx35_add_mxc_ehci_otg(&otg_pdata);
-	}
-	imx35_add_mxc_ehci_hs(&usbh1_pdata);
-
-	if (!otg_mode_host)
-		imx35_add_fsl_usb2_udc(&otg_device_pdata);
-
-	imx35_add_flexcan1();
-}
-
-static void __init pcm043_late_init(void)
-{
-	imx35_add_imx_ssi(0, &pcm043_ssi_pdata);
-
-	gpiod_add_lookup_table(&sd1_gpio_table);
-	imx35_add_sdhci_esdhc_imx(0, &sd1_pdata);
-}
-
-static void __init pcm043_timer_init(void)
-{
-	mx35_clocks_init();
-}
-
-MACHINE_START(PCM043, "Phytec Phycore pcm043")
-	/* Maintainer: Pengutronix */
-	.atag_offset = 0x100,
-	.map_io = mx35_map_io,
-	.init_early = imx35_init_early,
-	.init_irq = mx35_init_irq,
-	.init_time = pcm043_timer_init,
-	.init_machine	= pcm043_init,
-	.init_late	= pcm043_late_init,
-	.restart	= mxc_restart,
-MACHINE_END