Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "Newly added support for additional SoCs:
   - Axis Artpec-6 SoC family
   - Allwinner A83T SoC
   - Mediatek MT7623
   - NXP i.MX6QP SoC
   - ST Microelectronics stm32f469 microcontroller

  New features:
   - SMP support for Mediatek mt2701
   - Big-endian support for NXP i.MX
   - DaVinci now uses the new DMA engine dma_slave_map
   - OMAP now uses the new DMA engine dma_slave_map
   - earlyprintk support for palmchip uart on mach-tango
   - delay timer support for orion

  Other:
   - Exynos PMU driver moved out to drivers/soc/
   - Various smaller updates for Renesas, Xilinx, PXA, AT91, OMAP,
     uniphier"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits)
  ARM: uniphier: rework SMP code to support new System Bus binding
  ARM: uniphier: add missing of_node_put()
  ARM: at91: avoid defining CONFIG_* symbols in source code
  ARM: DRA7: hwmod: Add data for eDMA tpcc, tptc0, tptc1
  ARM: imx: Make reset_control_ops const
  ARM: imx: Do L2 errata only if the L2 cache isn't enabled
  ARM: imx: select ARM_CPU_SUSPEND only for imx6
  dmaengine: pxa_dma: fix the maximum requestor line
  ARM: alpine: select the Alpine MSI controller driver
  ARM: pxa: add the number of DMA requestor lines
  dmaengine: mmp-pdma: add number of requestors
  dma: mmp_pdma: Add the #dma-requests DT property documentation
  ARM: OMAP2+: Add rtc hwmod configuration for ti81xx
  ARM: s3c24xx: Avoid warning for inb/outb
  ARM: zynq: Move early printk virtual address to vmalloc area
  ARM: DRA7: hwmod: Add custom reset handler for PCIeSS
  ARM: SAMSUNG: Remove unused register offset definition
  ARM: EXYNOS: Cleanup header files inclusion
  drivers: soc: samsung: Enable COMPILE_TEST
  MAINTAINERS: Add maintainers entry for drivers/soc/samsung
  ...

4 files changed, 18 insertions, 4 deletions

diff --git a/arch/arm/include/debug/at91.S b/arch/arm/include/debug/at91.S
index 43243be94cfc..d4ae3b8e2426 100644
--- a/arch/arm/include/debug/at91.S
+++ b/arch/arm/include/debug/at91.S
@@ -15,7 +15,7 @@
 #define AT91_IO_P2V(x) (x)
 #endif
 
-#define CONFIG_DEBUG_UART_VIRT AT91_IO_P2V(CONFIG_DEBUG_UART_PHYS)
+#define AT91_DEBUG_UART_VIRT AT91_IO_P2V(CONFIG_DEBUG_UART_PHYS)
 
 #define AT91_DBGU_SR		(0x14)	/* Status Register */
 #define AT91_DBGU_THR		(0x1c)	/* Transmitter Holding Register */
@@ -24,7 +24,7 @@
 
 	.macro	addruart, rp, rv, tmp
 	ldr	\rp, =CONFIG_DEBUG_UART_PHYS		@ System peripherals (phys address)
-	ldr	\rv, =CONFIG_DEBUG_UART_VIRT		@ System peripherals (virt address)
+	ldr	\rv, =AT91_DEBUG_UART_VIRT		@ System peripherals (virt address)
 	.endm
 
 	.macro	senduart,rd,rx
diff --git a/arch/arm/include/debug/imx.S b/arch/arm/include/debug/imx.S
index 619d8cc1ac12..92c44760d656 100644
--- a/arch/arm/include/debug/imx.S
+++ b/arch/arm/include/debug/imx.S
@@ -11,6 +11,7 @@
  *
  */
 
+#include <asm/assembler.h>
 #include "imx-uart.h"
 
 /*
@@ -34,6 +35,7 @@
 		.endm
 
 		.macro	senduart,rd,rx
+		ARM_BE8(rev \rd, \rd)
 		str	\rd, [\rx, #0x40]	@ TXDATA
 		.endm
 
@@ -42,6 +44,7 @@
 
 		.macro	busyuart,rd,rx
 1002:		ldr	\rd, [\rx, #0x98]	@ SR2
+		ARM_BE8(rev \rd, \rd)
 		tst	\rd, #1 << 3		@ TXDC
 		beq	1002b			@ wait until transmit done
 		.endm
diff --git a/arch/arm/include/debug/palmchip.S b/arch/arm/include/debug/palmchip.S
new file mode 100644
index 000000000000..6824b2d1c38e
--- /dev/null
+++ b/arch/arm/include/debug/palmchip.S
@@ -0,0 +1,11 @@
+#include <linux/serial_reg.h>
+
+#undef UART_TX
+#undef UART_LSR
+#undef UART_MSR
+
+#define UART_TX 1
+#define UART_LSR 7
+#define UART_MSR 8
+
+#include <debug/8250.S>
diff --git a/arch/arm/include/debug/zynq.S b/arch/arm/include/debug/zynq.S
index de86b9247564..060cb5b49bfd 100644
--- a/arch/arm/include/debug/zynq.S
+++ b/arch/arm/include/debug/zynq.S
@@ -20,9 +20,9 @@
 #define UART_SR_TXEMPTY		0x00000008	/* TX FIFO empty */
 
 #define UART0_PHYS		0xE0000000
-#define UART0_VIRT		0xF0000000
+#define UART0_VIRT		0xF0800000
 #define UART1_PHYS		0xE0001000
-#define UART1_VIRT		0xF0001000
+#define UART1_VIRT		0xF0801000
 
 #if IS_ENABLED(CONFIG_DEBUG_ZYNQ_UART1)
 # define LL_UART_PADDR		UART1_PHYS