ARM: dts: imx6qdl: make pinctrl nodes board specific

Currently, all pinctrl setting nodes are defined in <soc>.dtsi, so that
boards that share the same pinctrl setting do not have to define it time
and time again in <board>.dts.  However, along with the devices and use
cases being added continuously, the pinctrl setting nodes under iomuxc
becomes more than expected.  This bloats device tree blob for particular
board unnecessarily since only a small subset of those pinctrl setting
nodes will be used by the board.  It impacts not only the DTB file size
but also the run-time device tree lookup efficiency.

The patch moves all the pinctrl data into individual boards as needed.
With the changes, the pinctrl setting nodes becomes local to particular
board, and it makes no sense to continue numbering the setting for
given peripheral.  Thus, all the pinctrl phandler name gets updated to
have only peripheral name in there.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

1 files changed, 89 insertions, 9 deletions

diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index f004913f7d80..26e1608d24a2 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -68,14 +68,14 @@
 &audmux {
 	status = "okay";
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux_1>;
+	pinctrl-0 = <&pinctrl_audmux>;
 };
 
 &ecspi1 {
 	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio3 19 0>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1_1>;
+	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
 	flash: m25p80@0 {
@@ -87,7 +87,7 @@
 
 &fec {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet_1>;
+	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
 	phy-reset-gpios = <&gpio3 23 0>;
 	status = "okay";
@@ -97,7 +97,7 @@
 	status = "okay";
 	clock-frequency = <100000>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1_1>;
+	pinctrl-0 = <&pinctrl_i2c1>;
 
 	codec: sgtl5000@0a {
 		compatible = "fsl,sgtl5000";
@@ -112,7 +112,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
-	hog {
+	imx6q-sabrelite {
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
 				MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x80000000
@@ -126,6 +126,86 @@
 				MX6QDL_PAD_EIM_D23__GPIO3_IO23	0x80000000
 			>;
 		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x80000000
+				MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x80000000
+				MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x80000000
+				MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x80000000
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			>;
+		};
 	};
 };
 
@@ -166,7 +246,7 @@
 &uart2 {
 	status = "okay";
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2_1>;
+	pinctrl-0 = <&pinctrl_uart2>;
 };
 
 &usbh1 {
@@ -176,14 +256,14 @@
 &usbotg {
 	vbus-supply = <&reg_usb_otg_vbus>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg_1>;
+	pinctrl-0 = <&pinctrl_usbotg>;
 	disable-over-current;
 	status = "okay";
 };
 
 &usdhc3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3_2>;
+	pinctrl-0 = <&pinctrl_usdhc3>;
 	cd-gpios = <&gpio7 0 0>;
 	wp-gpios = <&gpio7 1 0>;
 	vmmc-supply = <&reg_3p3v>;
@@ -192,7 +272,7 @@
 
 &usdhc4 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4_2>;
+	pinctrl-0 = <&pinctrl_usdhc4>;
 	cd-gpios = <&gpio2 6 0>;
 	wp-gpios = <&gpio2 7 0>;
 	vmmc-supply = <&reg_3p3v>;