summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/Makefile
diff options
context:
space:
mode:
authorJonathan Neuschäfer <j.neuschaefer@gmx.net>2019-03-31 21:16:02 +0200
committerShawn Guo <shawnguo@kernel.org>2019-04-11 11:06:01 +0800
commit891d940aef2f98ba043c6e63008a99dbdf68bdc6 (patch)
treeee3ab519f64b5e1e406a9319c49d5f43353a4f28 /arch/arm/boot/dts/Makefile
parentcadb32a9c118a1443a95c7a0bbec086b773a0f32 (diff)
downloadlwn-891d940aef2f98ba043c6e63008a99dbdf68bdc6.tar.gz
lwn-891d940aef2f98ba043c6e63008a99dbdf68bdc6.zip
ARM: dts: imx50: Add Kobo Aura DTS
The Kobo Aura is an e-book reader released in 2013. With the devicetree in its current state, the kernel will boot and run for about ten seconds. To solve this, the embedded controller needs to be told that the system should stay powered on. This will be done in a later patchset. - The IOMUXC mode bits for the SD interfaces were taken from the vendor's U-Boot fork. - The bus width of the eMMC is 4 bits in the vendor kernel, but I achieved better performance with 8 bits. - The SDIO clock frequency for the WiFi chip is 25MHz in the vendor kernel, but the WiFi chip (BCM43362) supports 50MHz, which works reliably on this board and gives slightly better performance. - The I2C pins' IOMUXC settings come from the vendor's U-Boot fork. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Diffstat (limited to 'arch/arm/boot/dts/Makefile')
-rw-r--r--arch/arm/boot/dts/Makefile3
1 files changed, 2 insertions, 1 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index c6eec98bc3c2..7776f97c4497 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -363,7 +363,8 @@ dtb-$(CONFIG_SOC_IMX35) += \
imx35-eukrea-mbimxsd35-baseboard.dtb \
imx35-pdk.dtb
dtb-$(CONFIG_SOC_IMX50) += \
- imx50-evk.dtb
+ imx50-evk.dtb \
+ imx50-kobo-aura.dtb
dtb-$(CONFIG_SOC_IMX51) += \
imx51-apf51.dtb \
imx51-apf51dev.dtb \