diff options
| author | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2020-08-31 07:17:17 +0200 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2020-08-31 07:17:17 +0200 |
| commit | dd5597245d35cfbb0890b8a868028aa1d2018701 (patch) | |
| tree | 865b93bf83987840fd763bf8a3d1c615ccda2f7b /Documentation | |
| parent | 551b6729578a8981c46af964c10bf7d5d9ddca83 (diff) | |
| parent | f75aef392f869018f78cfedf3c320a6b3fcfda6b (diff) | |
| download | lwn-dd5597245d35cfbb0890b8a868028aa1d2018701.tar.gz lwn-dd5597245d35cfbb0890b8a868028aa1d2018701.zip | |
Merge 5.9-rc3 into char-misc-next
We need the fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'Documentation')
29 files changed, 327 insertions, 206 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 index f7e32f218f73..e82fc37be802 100644 --- a/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 +++ b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 @@ -43,7 +43,7 @@ Description: read only This sysfs interface exposes the number of cores per chip present in the system. -What: /sys/devices/hv_24x7/interface/cpumask +What: /sys/devices/hv_24x7/cpumask Date: July 2020 Contact: Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org> Description: read only diff --git a/Documentation/admin-guide/ext4.rst b/Documentation/admin-guide/ext4.rst index a683976fad6d..d2795ca6821e 100644 --- a/Documentation/admin-guide/ext4.rst +++ b/Documentation/admin-guide/ext4.rst @@ -489,6 +489,9 @@ Files in /sys/fs/ext4/<devname>: multiple of this tuning parameter if the stripe size is not set in the ext4 superblock + mb_max_inode_prealloc + The maximum length of per-inode ext4_prealloc_space list. + mb_max_to_scan The maximum number of extents the multiblock allocator will search to find the best extent. @@ -529,21 +532,21 @@ Files in /sys/fs/ext4/<devname>: Ioctls ====== -There is some Ext4 specific functionality which can be accessed by applications -through the system call interfaces. The list of all Ext4 specific ioctls are -shown in the table below. +Ext4 implements various ioctls which can be used by applications to access +ext4-specific functionality. An incomplete list of these ioctls is shown in the +table below. This list includes truly ext4-specific ioctls (``EXT4_IOC_*``) as +well as ioctls that may have been ext4-specific originally but are now supported +by some other filesystem(s) too (``FS_IOC_*``). -Table of Ext4 specific ioctls +Table of Ext4 ioctls - EXT4_IOC_GETFLAGS + FS_IOC_GETFLAGS Get additional attributes associated with inode. The ioctl argument is - an integer bitfield, with bit values described in ext4.h. This ioctl is - an alias for FS_IOC_GETFLAGS. + an integer bitfield, with bit values described in ext4.h. - EXT4_IOC_SETFLAGS + FS_IOC_SETFLAGS Set additional attributes associated with inode. The ioctl argument is - an integer bitfield, with bit values described in ext4.h. This ioctl is - an alias for FS_IOC_SETFLAGS. + an integer bitfield, with bit values described in ext4.h. EXT4_IOC_GETVERSION, EXT4_IOC_GETVERSION_OLD Get the inode i_generation number stored for each inode. The diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index bdc1f33fd3d1..a1068742a6df 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -1233,8 +1233,7 @@ efi= [EFI] Format: { "debug", "disable_early_pci_dma", "nochunk", "noruntime", "nosoftreserve", - "novamap", "no_disable_early_pci_dma", - "old_map" } + "novamap", "no_disable_early_pci_dma" } debug: enable misc debug output. disable_early_pci_dma: disable the busmaster bit on all PCI bridges while in the EFI boot stub. @@ -1251,8 +1250,6 @@ novamap: do not call SetVirtualAddressMap(). no_disable_early_pci_dma: Leave the busmaster bit set on all PCI bridges while in the EFI boot stub - old_map [X86-64]: switch to the old ioremap-based EFI - runtime services mapping. [Needs CONFIG_X86_UV=y] efi_no_storage_paranoia [EFI; X86] Using this parameter you can use more than 50% of diff --git a/Documentation/admin-guide/pm/intel_pstate.rst b/Documentation/admin-guide/pm/intel_pstate.rst index 7adef969ffee..cdd1a9a7f9a2 100644 --- a/Documentation/admin-guide/pm/intel_pstate.rst +++ b/Documentation/admin-guide/pm/intel_pstate.rst @@ -564,8 +564,8 @@ Energy-Performance Preference (EPP) knob (if supported) or its Energy-Performance Bias (EPB) knob. It is also possible to write a positive integer value between 0 to 255, if the EPP feature is present. If the EPP feature is not present, writing integer value to this attribute is not -supported. In this case, user can use - "/sys/devices/system/cpu/cpu*/power/energy_perf_bias" interface. +supported. In this case, user can use the +"/sys/devices/system/cpu/cpu*/power/energy_perf_bias" interface. [Note that tasks may by migrated from one CPU to another by the scheduler's load-balancing algorithm and if different energy vs performance hints are diff --git a/Documentation/bpf/index.rst b/Documentation/bpf/index.rst index d46429be334e..7df2465fd108 100644 --- a/Documentation/bpf/index.rst +++ b/Documentation/bpf/index.rst @@ -36,6 +36,12 @@ Two sets of Questions and Answers (Q&A) are maintained. bpf_devel_QA +Helper functions +================ + +* `bpf-helpers(7)`_ maintains a list of helpers available to eBPF programs. + + Program types ============= @@ -79,4 +85,5 @@ Other .. _networking-filter: ../networking/filter.rst .. _man-pages: https://www.kernel.org/doc/man-pages/ .. _bpf(2): https://man7.org/linux/man-pages/man2/bpf.2.html +.. _bpf-helpers(7): https://man7.org/linux/man-pages/man7/bpf-helpers.7.html .. _BPF and XDP Reference Guide: https://docs.cilium.io/en/latest/bpf/ diff --git a/Documentation/devicetree/bindings/clock/imx23-clock.yaml b/Documentation/devicetree/bindings/clock/imx23-clock.yaml index 66cb238a1040..ad21899981af 100644 --- a/Documentation/devicetree/bindings/clock/imx23-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx23-clock.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Clock bindings for Freescale i.MX23 maintainers: - - Shawn Guo <shawn.guo@linaro.org> + - Shawn Guo <shawnguo@kernel.org> description: | The clock consumer should specify the desired clock by having the clock diff --git a/Documentation/devicetree/bindings/clock/imx28-clock.yaml b/Documentation/devicetree/bindings/clock/imx28-clock.yaml index 72328d5ca09a..f1af1108129e 100644 --- a/Documentation/devicetree/bindings/clock/imx28-clock.yaml +++ b/Documentation/devicetree/bindings/clock/imx28-clock.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Clock bindings for Freescale i.MX28 maintainers: - - Shawn Guo <shawn.guo@linaro.org> + - Shawn Guo <shawnguo@kernel.org> description: | The clock consumer should specify the desired clock by having the clock diff --git a/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml b/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml index ccf5b50e798b..dfa1133f8c5e 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml +++ b/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale MXS GPIO controller maintainers: - - Shawn Guo <shawn.guo@linaro.org> + - Shawn Guo <shawnguo@kernel.org> - Anson Huang <Anson.Huang@nxp.com> description: | diff --git a/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml b/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml index d3134ed775fa..21ae7bce038e 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale MXS Inter IC (I2C) Controller maintainers: - - Shawn Guo <shawn.guo@linaro.org> + - Shawn Guo <shawnguo@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.txt deleted file mode 100644 index 7841cb099e13..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.txt +++ /dev/null @@ -1,66 +0,0 @@ -Texas Instruments K3 Interrupt Aggregator -========================================= - -The Interrupt Aggregator (INTA) provides a centralized machine -which handles the termination of system events to that they can -be coherently processed by the host(s) in the system. A maximum -of 64 events can be mapped to a single interrupt. - - - Interrupt Aggregator - +-----------------------------------------+ - | Intmap VINT | - | +--------------+ +------------+ | - m ------>| | vint | bit | | 0 |.....|63| vint0 | - . | +--------------+ +------------+ | +------+ - . | . . | | HOST | -Globalevents ------>| . . |------>| IRQ | - . | . . | | CTRL | - . | . . | +------+ - n ------>| +--------------+ +------------+ | - | | vint | bit | | 0 |.....|63| vintx | - | +--------------+ +------------+ | - | | - +-----------------------------------------+ - -Configuration of these Intmap registers that maps global events to vint is done -by a system controller (like the Device Memory and Security Controller on K3 -AM654 SoC). Driver should request the system controller to get the range -of global events and vints assigned to the requesting host. Management -of these requested resources should be handled by driver and requests -system controller to map specific global event to vint, bit pair. - -Communication between the host processor running an OS and the system -controller happens through a protocol called TI System Control Interface -(TISCI protocol). For more details refer: -Documentation/devicetree/bindings/arm/keystone/ti,sci.txt - -TISCI Interrupt Aggregator Node: -------------------------------- -- compatible: Must be "ti,sci-inta". -- reg: Should contain registers location and length. -- interrupt-controller: Identifies the node as an interrupt controller -- msi-controller: Identifies the node as an MSI controller. -- interrupt-parent: phandle of irq parent. -- ti,sci: Phandle to TI-SCI compatible System controller node. -- ti,sci-dev-id: TISCI device ID of the Interrupt Aggregator. -- ti,sci-rm-range-vint: Array of TISCI subtype ids representing vints(inta - outputs) range within this INTA, assigned to the - requesting host context. -- ti,sci-rm-range-global-event: Array of TISCI subtype ids representing the - global events range reaching this IA and are assigned - to the requesting host context. - -Example: --------- -main_udmass_inta: interrupt-controller@33d00000 { - compatible = "ti,sci-inta"; - reg = <0x0 0x33d00000 0x0 0x100000>; - interrupt-controller; - msi-controller; - interrupt-parent = <&main_navss_intr>; - ti,sci = <&dmsc>; - ti,sci-dev-id = <179>; - ti,sci-rm-range-vint = <0x0>; - ti,sci-rm-range-global-event = <0x1>; -}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml new file mode 100644 index 000000000000..c7cd05656a3e --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/ti,sci-inta.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments K3 Interrupt Aggregator + +maintainers: + - Lokesh Vutla <lokeshvutla@ti.com> + +allOf: + - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml# + +description: | + The Interrupt Aggregator (INTA) provides a centralized machine + which handles the termination of system events to that they can + be coherently processed by the host(s) in the system. A maximum + of 64 events can be mapped to a single interrupt. + + Interrupt Aggregator + +-----------------------------------------+ + | Intmap VINT | + | +--------------+ +------------+ | + m ------>| | vint | bit | | 0 |.....|63| vint0 | + . | +--------------+ +------------+ | +------+ + . | . . | | HOST | + Globalevents ------>| . . |----->| IRQ | + . | . . | | CTRL | + . | . . | +------+ + n ------>| +--------------+ +------------+ | + | | vint | bit | | 0 |.....|63| vintx | + | +--------------+ +------------+ | + | | + +-----------------------------------------+ + + Configuration of these Intmap registers that maps global events to vint is + done by a system controller (like the Device Memory and Security Controller + on AM654 SoC). Driver should request the system controller to get the range + of global events and vints assigned to the requesting host. Management + of these requested resources should be handled by driver and requests + system controller to map specific global event to vint, bit pair. + + Communication between the host processor running an OS and the system + controller happens through a protocol called TI System Control Interface + (TISCI protocol). + +properties: + compatible: + const: ti,sci-inta + + reg: + maxItems: 1 + + interrupt-controller: true + + msi-controller: true + + ti,interrupt-ranges: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: | + Interrupt ranges that converts the INTA output hw irq numbers + to parents's input interrupt numbers. + items: + items: + - description: | + "output_irq" specifies the base for inta output irq + - description: | + "parent's input irq" specifies the base for parent irq + - description: | + "limit" specifies the limit for translation + +required: + - compatible + - reg + - interrupt-controller + - msi-controller + - ti,sci + - ti,sci-dev-id + - ti,interrupt-ranges + +examples: + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + + main_udmass_inta: msi-controller@33d00000 { + compatible = "ti,sci-inta"; + reg = <0x0 0x33d00000 0x0 0x100000>; + interrupt-controller; + msi-controller; + interrupt-parent = <&main_navss_intr>; + ti,sci = <&dmsc>; + ti,sci-dev-id = <179>; + ti,interrupt-ranges = <0 0 256>; + }; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt deleted file mode 100644 index 178fca08278f..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt +++ /dev/null @@ -1,82 +0,0 @@ -Texas Instruments K3 Interrupt Router -===================================== - -The Interrupt Router (INTR) module provides a mechanism to mux M -interrupt inputs to N interrupt outputs, where all M inputs are selectable -to be driven per N output. An Interrupt Router can either handle edge triggered -or level triggered interrupts and that is fixed in hardware. - - Interrupt Router - +----------------------+ - | Inputs Outputs | - +-------+ | +------+ +-----+ | - | GPIO |----------->| | irq0 | | 0 | | Host IRQ - +-------+ | +------+ +-----+ | controller - | . . | +-------+ - +-------+ | . . |----->| IRQ | - | INTA |----------->| . . | +-------+ - +-------+ | . +-----+ | - | +------+ | N | | - | | irqM | +-----+ | - | +------+ | - | | - +----------------------+ - -There is one register per output (MUXCNTL_N) that controls the selection. -Configuration of these MUXCNTL_N registers is done by a system controller -(like the Device Memory and Security Controller on K3 AM654 SoC). System -controller will keep track of the used and unused registers within the Router. -Driver should request the system controller to get the range of GIC IRQs -assigned to the requesting hosts. It is the drivers responsibility to keep -track of Host IRQs. - -Communication between the host processor running an OS and the system -controller happens through a protocol called TI System Control Interface -(TISCI protocol). For more details refer: -Documentation/devicetree/bindings/arm/keystone/ti,sci.txt - -TISCI Interrupt Router Node: ----------------------------- -Required Properties: -- compatible: Must be "ti,sci-intr". -- ti,intr-trigger-type: Should be one of the following: - 1: If intr supports edge triggered interrupts. - 4: If intr supports level triggered interrupts. -- interrupt-controller: Identifies the node as an interrupt controller -- #interrupt-cells: Specifies the number of cells needed to encode an - interrupt source. The value should be 2. - First cell should contain the TISCI device ID of source - Second cell should contain the interrupt source offset - within the device. -- ti,sci: Phandle to TI-SCI compatible System controller node. -- ti,sci-dst-id: TISCI device ID of the destination IRQ controller. -- ti,sci-rm-range-girq: Array of TISCI subtype ids representing the host irqs - assigned to this interrupt router. Each subtype id - corresponds to a range of host irqs. - -For more details on TISCI IRQ resource management refer: -https://downloads.ti.com/tisci/esd/latest/2_tisci_msgs/rm/rm_irq.html - -Example: --------- -The following example demonstrates both interrupt router node and the consumer -node(main gpio) on the AM654 SoC: - -main_intr: interrupt-controller0 { - compatible = "ti,sci-intr"; - ti,intr-trigger-type = <1>; - interrupt-controller; - interrupt-parent = <&gic500>; - #interrupt-cells = <2>; - ti,sci = <&dmsc>; - ti,sci-dst-id = <56>; - ti,sci-rm-range-girq = <0x1>; -}; - -main_gpio0: gpio@600000 { - ... - interrupt-parent = <&main_intr>; - interrupts = <57 256>, <57 257>, <57 258>, - <57 259>, <57 260>, <57 261>; - ... -}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml new file mode 100644 index 000000000000..cff6a956afb4 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/ti,sci-intr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments K3 Interrupt Router + +maintainers: + - Lokesh Vutla <lokeshvutla@ti.com> + +allOf: + - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml# + +description: | + The Interrupt Router (INTR) module provides a mechanism to mux M + interrupt inputs to N interrupt outputs, where all M inputs are selectable + to be driven per N output. An Interrupt Router can either handle edge + triggered or level triggered interrupts and that is fixed in hardware. + + Interrupt Router + +----------------------+ + | Inputs Outputs | + +-------+ | +------+ +-----+ | + | GPIO |----------->| | irq0 | | 0 | | Host IRQ + +-------+ | +------+ +-----+ | controller + | . . | +-------+ + +-------+ | . . |----->| IRQ | + | INTA |----------->| . . | +-------+ + +-------+ | . +-----+ | + | +------+ | N | | + | | irqM | +-----+ | + | +------+ | + | | + +----------------------+ + + There is one register per output (MUXCNTL_N) that controls the selection. + Configuration of these MUXCNTL_N registers is done by a system controller + (like the Device Memory and Security Controller on K3 AM654 SoC). System + controller will keep track of the used and unused registers within the Router. + Driver should request the system controller to get the range of GIC IRQs + assigned to the requesting hosts. It is the drivers responsibility to keep + track of Host IRQs. + + Communication between the host processor running an OS and the system + controller happens through a protocol called TI System Control Interface + (TISCI protocol). + +properties: + compatible: + const: ti,sci-intr + + ti,intr-trigger-type: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 4] + description: | + Should be one of the following. + 1 = If intr supports edge triggered interrupts. + 4 = If intr supports level triggered interrupts. + + interrupt-controller: true + + '#interrupt-cells': + const: 1 + description: | + The 1st cell should contain interrupt router input hw number. + + ti,interrupt-ranges: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: | + Interrupt ranges that converts the INTR output hw irq numbers + to parents's input interrupt numbers. + items: + items: + - description: | + "output_irq" specifies the base for intr output irq + - description: | + "parent's input irq" specifies the base for parent irq + - description: | + "limit" specifies the limit for translation + +required: + - compatible + - ti,intr-trigger-type + - interrupt-controller + - '#interrupt-cells' + - ti,sci + - ti,sci-dev-id + - ti,interrupt-ranges + +examples: + - | + main_gpio_intr: interrupt-controller0 { + compatible = "ti,sci-intr"; + ti,intr-trigger-type = <1>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <1>; + ti,sci = <&dmsc>; + ti,sci-dev-id = <131>; + ti,interrupt-ranges = <0 360 32>; + }; diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml index 75dc1168d717..10b45966f1b8 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale Enhanced Secure Digital Host Controller (eSDHC) for i.MX maintainers: - - Shawn Guo <shawn.guo@linaro.org> + - Shawn Guo <shawnguo@kernel.org> allOf: - $ref: "mmc-controller.yaml" diff --git a/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml b/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml index 1cccc0478d49..bec8f8c71ff2 100644 --- a/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml +++ b/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale MXS MMC controller maintainers: - - Shawn Guo <shawn.guo@linaro.org> + - Shawn Guo <shawnguo@kernel.org> description: | The Freescale MXS Synchronous Serial Ports (SSP) can act as a MMC controller diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index 1c4474036d46..fa2baca8c726 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -54,7 +54,8 @@ properties: phy-connection-type: description: - Operation mode of the PHY interface + Specifies interface type between the Ethernet device and a physical + layer (PHY) device. enum: # There is not a standard bus between the MAC and the PHY, # something proprietary is being used to embed the PHY in the diff --git a/Documentation/devicetree/bindings/net/renesas,ether.yaml b/Documentation/devicetree/bindings/net/renesas,ether.yaml index 08678af5ed93..8ce5ed8a58dd 100644 --- a/Documentation/devicetree/bindings/net/renesas,ether.yaml +++ b/Documentation/devicetree/bindings/net/renesas,ether.yaml @@ -59,9 +59,15 @@ properties: clocks: maxItems: 1 - pinctrl-0: true + power-domains: + maxItems: 1 + + resets: + maxItems: 1 - pinctrl-names: true + phy-mode: true + + phy-handle: true renesas,no-ether-link: type: boolean @@ -74,6 +80,11 @@ properties: specify when the Ether LINK signal is active-low instead of normal active-high +patternProperties: + "^ethernet-phy@[0-9a-f]$": + type: object + $ref: ethernet-phy.yaml# + required: - compatible - reg @@ -83,7 +94,8 @@ required: - '#address-cells' - '#size-cells' - clocks - - pinctrl-0 + +additionalProperties: false examples: # Lager board @@ -99,8 +111,6 @@ examples: clocks = <&mstp8_clks R8A7790_CLK_ETHER>; phy-mode = "rmii"; phy-handle = <&phy1>; - pinctrl-0 = <ðer_pins>; - pinctrl-names = "default"; renesas,ether-link-active-low; #address-cells = <1>; #size-cells = <0>; @@ -109,7 +119,5 @@ examples: reg = <1>; interrupt-parent = <&irqc0>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - pinctrl-0 = <&phy1_pins>; - pinctrl-names = "default"; }; }; diff --git a/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml index 64b2c64ca806..a1e2be737eec 100644 --- a/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml @@ -9,6 +9,14 @@ title: PCIe RC controller on Intel Gateway SoCs maintainers: - Dilip Kota <eswara.kota@linux.intel.com> +select: + properties: + compatible: + contains: + const: intel,lgm-pcie + required: + - compatible + properties: compatible: items: diff --git a/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml b/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml index da68f4a25dd9..8740e076061e 100644 --- a/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale MXS PWM controller maintainers: - - Shawn Guo <shawn.guo@linaro.org> + - Shawn Guo <shawnguo@kernel.org> - Anson Huang <anson.huang@nxp.com> properties: diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml index 1b50cedbfb3e..50df1a40bbe3 100644 --- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale (Enhanced) Configurable Serial Peripheral Interface (CSPI/eCSPI) for i.MX maintainers: - - Shawn Guo <shawn.guo@linaro.org> + - Shawn Guo <shawnguo@kernel.org> allOf: - $ref: "/schemas/spi/spi-controller.yaml#" diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml index 22882e769e26..312d8fee9dbb 100644 --- a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml +++ b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml @@ -39,6 +39,7 @@ properties: spi common code does not support use of CS signals discontinuously. i.MX8DXL-EVK board only uses CS1 without using CS0. Therefore, add this property to re-config the chipselect value in the LPSPI driver. + type: boolean required: - compatible diff --git a/Documentation/devicetree/bindings/thermal/imx-thermal.yaml b/Documentation/devicetree/bindings/thermal/imx-thermal.yaml index aedac1669998..16b57f57d103 100644 --- a/Documentation/devicetree/bindings/thermal/imx-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/imx-thermal.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: NXP i.MX Thermal Binding maintainers: - - Shawn Guo <shawn.guo@linaro.org> + - Shawn Guo <shawnguo@kernel.org> - Anson Huang <Anson.Huang@nxp.com> properties: diff --git a/Documentation/devicetree/bindings/timer/sifive,clint.yaml b/Documentation/devicetree/bindings/timer/sifive,clint.yaml new file mode 100644 index 000000000000..2a0e9cd9fbcf --- /dev/null +++ b/Documentation/devicetree/bindings/timer/sifive,clint.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/sifive,clint.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SiFive Core Local Interruptor + +maintainers: + - Palmer Dabbelt <palmer@dabbelt.com> + - Anup Patel <anup.patel@wdc.com> + +description: + SiFive (and other RISC-V) SOCs include an implementation of the SiFive + Core Local Interruptor (CLINT) for M-mode timer and M-mode inter-processor + interrupts. It directly connects to the timer and inter-processor interrupt + lines of various HARTs (or CPUs) so RISC-V per-HART (or per-CPU) local + interrupt controller is the parent interrupt controller for CLINT device. + The clock frequency of CLINT is specified via "timebase-frequency" DT + property of "/cpus" DT node. The "timebase-frequency" DT property is + described in Documentation/devicetree/bindings/riscv/cpus.yaml + +properties: + compatible: + items: + - const: sifive,fu540-c000-clint + - const: sifive,clint0 + + description: + Should be "sifive,<chip>-clint" and "sifive,clint<version>". + Supported compatible strings are - + "sifive,fu540-c000-clint" for the SiFive CLINT v0 as integrated + onto the SiFive FU540 chip, and "sifive,clint0" for the SiFive + CLINT v0 IP block with no chip integration tweaks. + Please refer to sifive-blocks-ip-versioning.txt for details + + reg: + maxItems: 1 + + interrupts-extended: + minItems: 1 + +additionalProperties: false + +required: + - compatible + - reg + - interrupts-extended + +examples: + - | + timer@2000000 { + compatible = "sifive,fu540-c000-clint", "sifive,clint0"; + interrupts-extended = <&cpu1intc 3 &cpu1intc 7 + &cpu2intc 3 &cpu2intc 7 + &cpu3intc 3 &cpu3intc 7 + &cpu4intc 3 &cpu4intc 7>; + reg = <0x2000000 0x10000>; + }; +... diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 2baee2c817c1..63996ab03521 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -993,7 +993,7 @@ patternProperties: "^sst,.*": description: Silicon Storage Technology, Inc. "^sstar,.*": - description: Xiamen Xingchen(SigmaStar) Technology Co., Ltd. + description: Xiamen Xingchen(SigmaStar) Technology Co., Ltd. (formerly part of MStar Semiconductor, Inc.) "^st,.*": description: STMicroelectronics diff --git a/Documentation/devicetree/writing-schema.rst b/Documentation/devicetree/writing-schema.rst index 8c74a99f95e2..16f21e182ff6 100644 --- a/Documentation/devicetree/writing-schema.rst +++ b/Documentation/devicetree/writing-schema.rst @@ -5,7 +5,7 @@ Writing DeviceTree Bindings in json-schema Devicetree bindings are written using json-schema vocabulary. Schema files are written in a JSON compatible subset of YAML. YAML is used instead of JSON as it -considered more human readable and has some advantages such as allowing +is considered more human readable and has some advantages such as allowing comments (Prefixed with '#'). Schema Contents @@ -19,7 +19,7 @@ $id A json-schema unique identifier string. The string must be a valid URI typically containing the binding's filename and path. For DT schema, it must begin with "http://devicetree.org/schemas/". The URL is used in constructing - references to other files specified in schema "$ref" properties. A $ref values + references to other files specified in schema "$ref" properties. A $ref value with a leading '/' will have the hostname prepended. A $ref value a relative path or filename only will be prepended with the hostname and path components of the current schema file's '$id' value. A URL is used even for local files, diff --git a/Documentation/fault-injection/nvme-fault-injection.rst b/Documentation/fault-injection/nvme-fault-injection.rst index cdb2e829228e..1d4427890d75 100644 --- a/Documentation/fault-injection/nvme-fault-injection.rst +++ b/Documentation/fault-injection/nvme-fault-injection.rst @@ -3,7 +3,7 @@ NVMe Fault Injection Linux's fault injection framework provides a systematic way to support error injection via debugfs in the /sys/kernel/debug directory. When enabled, the default NVME_SC_INVALID_OPCODE with no retry will be -injected into the nvme_end_request. Users can change the default status +injected into the nvme_try_complete_req. Users can change the default status code and no retry flag via the debugfs. The list of Generic Command Status can be found in include/linux/nvme.h diff --git a/Documentation/filesystems/ext4/about.rst b/Documentation/filesystems/ext4/about.rst index 0aadba052264..cc76b577d2f4 100644 --- a/Documentation/filesystems/ext4/about.rst +++ b/Documentation/filesystems/ext4/about.rst @@ -39,6 +39,6 @@ entry. Other References ---------------- -Also see http://www.nongnu.org/ext2-doc/ for quite a collection of +Also see https://www.nongnu.org/ext2-doc/ for quite a collection of information about ext2/3. Here's another old reference: http://wiki.osdev.org/Ext2 diff --git a/Documentation/networking/bonding.rst b/Documentation/networking/bonding.rst index 24168b0d16bd..adc314639085 100644 --- a/Documentation/networking/bonding.rst +++ b/Documentation/networking/bonding.rst @@ -2860,17 +2860,6 @@ version of the linux kernel, found on http://kernel.org The latest version of this document can be found in the latest kernel source (named Documentation/networking/bonding.rst). -Discussions regarding the usage of the bonding driver take place on the -bonding-devel mailing list, hosted at sourceforge.net. If you have questions or -problems, post them to the list. The list address is: - -bonding-devel@lists.sourceforge.net - -The administrative interface (to subscribe or unsubscribe) can -be found at: - -https://lists.sourceforge.net/lists/listinfo/bonding-devel - Discussions regarding the development of the bonding driver take place on the main Linux network mailing list, hosted at vger.kernel.org. The list address is: @@ -2881,10 +2870,3 @@ The administrative interface (to subscribe or unsubscribe) can be found at: http://vger.kernel.org/vger-lists.html#netdev - -Donald Becker's Ethernet Drivers and diag programs may be found at : - - - http://web.archive.org/web/%2E/http://www.scyld.com/network/ - -You will also find a lot of information regarding Ethernet, NWay, MII, -etc. at www.scyld.com. diff --git a/Documentation/powerpc/syscall64-abi.rst b/Documentation/powerpc/syscall64-abi.rst index 46caaadbb029..379817ca64d2 100644 --- a/Documentation/powerpc/syscall64-abi.rst +++ b/Documentation/powerpc/syscall64-abi.rst @@ -49,16 +49,18 @@ Register preservation rules Register preservation rules match the ELF ABI calling sequence with the following differences: -=========== ============= ======================================== --- For the sc instruction, differences with the ELF ABI --- +=========== ============= ======================================== r0 Volatile (System call number.) r3 Volatile (Parameter 1, and return value.) r4-r8 Volatile (Parameters 2-6.) cr0 Volatile (cr0.SO is the return error condition.) cr1, cr5-7 Nonvolatile lr Nonvolatile +=========== ============= ======================================== --- For the scv 0 instruction, differences with the ELF ABI --- +=========== ============= ======================================== r0 Volatile (System call number.) r3 Volatile (Parameter 1, and return value.) r4-r8 Volatile (Parameters 2-6.) |