Merge tag 'gpio-v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.9 series:

  Subsystem improvements:

   - do away with the last users of the obsolete Kconfig options
     ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB (the latter
     always sounded like an item on a wishlist to Santa Claus to me). We
     can now select GPIOLIB and be done with it, for all archs. After
     some struggle it even work on UM. Not that it has GPIO, but if it
     wants to, it can select the library.

   - continued efforts to make drivers properly either tristate or bool.

   - introduce a warning for drivers assigning default triggers to their
     irqchip lines when probed from device tree, so we find and fix
     these ambigous drivers. It is agreed that in the OF config path,
     the device tree defines trigger characteristics.

   - the same warning, mutatis mutandis, for ACPI-probed GPIO irqchips.

   - we introduce the ability to mark certain IRQ lines as "unusable" as
     they can be taken by BIOS/firmware, unrouted in silicon and
     generally nasty if you use them, and such things. This is put to
     good use in the STMPE driver and also in the Cherryview pin control
     driver.

   - a new "mockup" virtual GPIO device that can be used for testing.
     The plan is to add unit tests under tools/* for exercising this
     device and verify that the kernel code paths are working as they
     should.

   - make memory-mapped I/O-drivers depend on HAS_IOMEM. This was
     implicit all the time, but when people started building UM with
     allyesconfig or allmodconfig it exploded in their face.

   - move some stray bits of device tree and ACPI HW description
     callbacks down into their respective implementation silo. These
     were causing issues when compiling on !HAS_IOMEM as well, so now
     eventually UM compiles the GPIOLIB library if it wants to.

  New drivers:

   - new driver for the Aspeed GPIO front-end companion to the pin
     controller merged through the pin control tree.

   - new driver for the LP873x PMIC GPIO portions.

   - new driver for Technologic Systems' I2C FPGA GPIO such as TS4900,
     TS-7970, TS-7990 and TS-4100.

   - new driver for the Broadcom BCM63xx series including BCM6338 and
     BCM6345.

   - new driver for the Intel WhiskeyCove PMIC GPIO.

   - new driver for the Allwinner AXP209 PMIC GPIO portions.

   - new driver for Diamond Systems 48 line GPIO-MM, another of these
     port-mapped I/O expansion cards.

   - support the STMicroelectronics STMPE1600 variant in the STMPE
     driver.

  Driver improvements:

   - the STMPE driver now supports rising/falling edge detection
     properly for IRQs.

   - the PCA954x will now fetch and enable its VCC regulator properly.

   - major rework of the PCA953x driver with the goal of eventually
     switching it over to use regmap and thus modernize it even more.

   - switch the IOP driver to use the generic MMIO GPIO library.

   - move the ages old HTC EGPIO (extended GPIO) GPIO expander driver
     over to this subsystem from MFD, achieveing some separation of
     concerns"

* tag 'gpio-v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (81 commits)
  gpio: add missing static inline
  gpio: OF: localize some gpiochip init functions
  gpio: acpi: separation of concerns
  gpio: OF: separation of concerns
  gpio: make memory-mapped drivers depend on HAS_IOMEM
  gpio: stmpe: use BIT() macro
  gpio: stmpe: forbid unused lines to be mapped as IRQs
  mfd/gpio: Move HTC GPIO driver to GPIO subsystem
  gpio: MAINTAINERS: Add an entry for GPIO mockup driver
  gpio/mockup: add virtual gpio device
  gpio: Added zynq specific check for special pins on bank zero
  gpio: axp209: Implement get_direction
  gpio: aspeed: remove redundant return value check
  gpio: loongson1: remove redundant return value check
  ARM: omap2: fix missing include
  gpio: tc3589x: fix up complaints on unsigned
  gpio: tc3589x: add .get_direction() and small cleanup
  gpio: f7188x: use gpiochip_get_data instead of container_of
  gpio: tps65218: use devm_gpiochip_add_data() for gpio registration
  gpio: aspeed: fix return value check in aspeed_gpio_probe()
  ...

12 files changed, 171 insertions, 55 deletions

diff --git a/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.txt b/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.txt
new file mode 100644
index 000000000000..e7853143fa42
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.txt
@@ -0,0 +1,46 @@
+Bindings for the Broadcom's brcm,bcm6345-gpio memory-mapped GPIO controllers.
+
+These bindings can be used on any BCM63xx SoC. However, BCM6338 and BCM6345
+are the only ones which don't need a pinctrl driver.
+BCM6338 have 8-bit data and dirout registers, where GPIO state can be read
+and/or written, and the direction changed from input to output.
+BCM6345 have 16-bit data and dirout registers, where GPIO state can be read
+and/or written, and the direction changed from input to output.
+
+Required properties:
+	- compatible: should be "brcm,bcm6345-gpio"
+	- reg-names: must contain
+		"dat" - data register
+		"dirout" - direction (output) register
+	- reg: address + size pairs describing the GPIO register sets;
+		order must correspond with the order of entries in reg-names
+	- #gpio-cells: must be set to 2. The first cell is the pin number and
+			the second cell is used to specify the gpio polarity:
+			0 = active high
+			1 = active low
+	- gpio-controller: Marks the device node as a gpio controller.
+
+Optional properties:
+	- native-endian: use native endian memory.
+
+Examples:
+	- BCM6338:
+	gpio: gpio-controller@fffe0407 {
+		compatible = "brcm,bcm6345-gpio";
+		reg-names = "dirout", "dat";
+		reg = <0xfffe0407 1>, <0xfffe040f 1>;
+
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	- BCM6345:
+	gpio: gpio-controller@fffe0406 {
+		compatible = "brcm,bcm6345-gpio";
+		reg-names = "dirout", "dat";
+		reg = <0xfffe0406 2>, <0xfffe040a 2>;
+		native-endian;
+
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt b/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt
new file mode 100644
index 000000000000..393bb2ed8a77
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt
@@ -0,0 +1,36 @@
+Aspeed GPIO controller Device Tree Bindings
+-------------------------------------------
+
+Required properties:
+- compatible		: Either "aspeed,ast2400-gpio" or "aspeed,ast2500-gpio"
+
+- #gpio-cells 		: Should be two
+			  - First cell is the GPIO line number
+			  - Second cell is used to specify optional
+			    parameters (unused)
+
+- reg			: Address and length of the register set for the device
+- gpio-controller	: Marks the device node as a GPIO controller.
+- interrupts		: Interrupt specifier (see interrupt bindings for
+			  details)
+- interrupt-controller	: Mark the GPIO controller as an interrupt-controller
+
+Optional properties:
+
+- interrupt-parent     : The parent interrupt controller, optional if inherited
+
+The gpio and interrupt properties are further described in their respective
+bindings documentation:
+
+- Documentation/devicetree/bindings/gpio/gpio.txt
+- Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+
+  Example:
+	gpio@1e780000 {
+		#gpio-cells = <2>;
+		compatible = "aspeed,ast2400-gpio";
+		gpio-controller;
+		interrupts = <20>;
+		reg = <0x1e780000 0x1000>;
+		interrupt-controller;
+	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-axp209.txt b/Documentation/devicetree/bindings/gpio/gpio-axp209.txt
new file mode 100644
index 000000000000..a6611304dd3c
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-axp209.txt
@@ -0,0 +1,30 @@
+AXP209 GPIO controller
+
+This driver follows the usual GPIO bindings found in
+Documentation/devicetree/bindings/gpio/gpio.txt
+
+Required properties:
+- compatible: Should be "x-powers,axp209-gpio"
+- #gpio-cells: Should be two. The first cell is the pin number and the
+  second is the GPIO flags.
+- gpio-controller: Marks the device node as a GPIO controller.
+
+This node must be a subnode of the axp20x PMIC, documented in
+Documentation/devicetree/bindings/mfd/axp20x.txt
+
+Example:
+
+axp209: pmic@34 {
+	compatible = "x-powers,axp209";
+	reg = <0x34>;
+	interrupt-parent = <&nmi_intc>;
+	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	axp_gpio: gpio {
+		compatible = "x-powers,axp209-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-tpic2810.txt b/Documentation/devicetree/bindings/gpio/gpio-tpic2810.txt
new file mode 100644
index 000000000000..1afc2de7a537
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-tpic2810.txt
@@ -0,0 +1,16 @@
+TPIC2810 GPIO controller bindings
+
+Required properties:
+ - compatible		: Should be "ti,tpic2810".
+ - reg			: The I2C address of the device
+ - gpio-controller	: Marks the device node as a GPIO controller.
+ - #gpio-cells		: Should be two. For consumer use see gpio.txt.
+
+Example:
+
+	gpio@60 {
+		compatible = "ti,tpic2810";
+		reg = <0x60>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-tps65086.txt b/Documentation/devicetree/bindings/gpio/gpio-tps65086.txt
deleted file mode 100644
index ba051074bedc..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-tps65086.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-* TPS65086 GPO Controller bindings
-
-Required properties:
- - compatible		: Should be "ti,tps65086-gpio".
- - gpio-controller	: Marks the device node as a GPIO Controller.
- - #gpio-cells		: Should be two. The first cell is the pin number
-			    and the second cell is used to specify flags.
-			    See ../gpio/gpio.txt for possible values.
-
-Example:
-
-	gpio4: gpio {
-		compatible = "ti,tps65086-gpio";
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-ts4900.txt b/Documentation/devicetree/bindings/gpio/gpio-ts4900.txt
new file mode 100644
index 000000000000..3f8e71b1ab2a
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-ts4900.txt
@@ -0,0 +1,30 @@
+* Technologic Systems I2C-FPGA's GPIO controller bindings
+
+This bindings describes the GPIO controller for Technologic's FPGA core.
+TS-4900's FPGA encodes the GPIO state on 3 bits, whereas the TS-7970's FPGA
+uses 2 bits: it doesn't use a dedicated input bit.
+
+Required properties:
+- compatible: Should be one of the following
+		"technologic,ts4900-gpio"
+		"technologic,ts7970-gpio"
+- reg: Physical base address of the controller and length
+       of memory mapped region.
+- #gpio-cells: Should be two. The first cell is the pin number.
+- gpio-controller: Marks the device node as a gpio controller.
+
+Optional property:
+- ngpios: Number of GPIOs this controller is instantiated with,
+  the default is 32. See gpio.txt for more details.
+
+Example:
+
+&i2c2 {
+	gpio8: gpio@28 {
+		compatible = "technologic,ts4900-gpio";
+		reg = <0x28>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		ngpios = <32>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
index 98d198396956..c3d016532d8e 100644
--- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
@@ -44,26 +44,3 @@ Example for a PXA3xx platform:
 		interrupt-controller;
 		#interrupt-cells = <0x2>;
 	};
-
-* Marvell Orion GPIO Controller
-
-Required properties:
-- compatible         : Should be "marvell,orion-gpio"
-- reg                : Address and length of the register set for controller.
-- gpio-controller    : So we know this is a gpio controller.
-- ngpio              : How many gpios this controller has.
-- interrupts	     : Up to 4 Interrupts for the controller.
-
-Optional properties:
-- mask-offset        : For SMP Orions, offset for Nth CPU
-
-Example:
-
-		gpio0: gpio@10100 {
-			compatible = "marvell,orion-gpio";
-			#gpio-cells = <2>;
-			gpio-controller;
-			reg = <0x10100 0x40>;
-			ngpio = <32>;
-			interrupts = <35>, <36>, <37>, <38>;
-		};
diff --git a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt
index 8da26b35b5c3..7c1ab3b3254f 100644
--- a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt
+++ b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt
@@ -11,6 +11,7 @@ Required Properties:
     - "renesas,gpio-r8a7793": for R8A7793 (R-Car M2-N) compatible GPIO controller.
     - "renesas,gpio-r8a7794": for R8A7794 (R-Car E2) compatible GPIO controller.
     - "renesas,gpio-r8a7795": for R8A7795 (R-Car H3) compatible GPIO controller.
+    - "renesas,gpio-r8a7796": for R8A7796 (R-Car M3-W) compatible GPIO controller.
     - "renesas,gpio-rcar": for generic R-Car GPIO controller.
 
   - reg: Base address and length of each memory resource used by the GPIO
diff --git a/Documentation/devicetree/bindings/mfd/stmpe.txt b/Documentation/devicetree/bindings/mfd/stmpe.txt
index 3fb68bfefc8b..f9065a5781a2 100644
--- a/Documentation/devicetree/bindings/mfd/stmpe.txt
+++ b/Documentation/devicetree/bindings/mfd/stmpe.txt
@@ -4,7 +4,7 @@ STMPE is an MFD device which may expose the following inbuilt devices: gpio,
 keypad, touchscreen, adc, pwm, rotator.
 
 Required properties:
- - compatible                   : "st,stmpe[610|801|811|1601|2401|2403]"
+ - compatible                   : "st,stmpe[610|801|811|1600|1601|2401|2403]"
  - reg                          : I2C/SPI address of the device
 
 Optional properties:
diff --git a/Documentation/gpio/board.txt b/Documentation/gpio/board.txt
index 86d3fa95fd12..40884c4fe40c 100644
--- a/Documentation/gpio/board.txt
+++ b/Documentation/gpio/board.txt
@@ -8,9 +8,9 @@ gpio-legacy.txt (actually, there is no real mapping possible with the old
 interface; you just fetch an integer from somewhere and request the
 corresponding GPIO.
 
-Platforms that make use of GPIOs must select ARCH_REQUIRE_GPIOLIB (if GPIO usage
-is mandatory) or ARCH_WANT_OPTIONAL_GPIOLIB (if GPIO support can be omitted) in
-their Kconfig. Then, how GPIOs are mapped depends on what the platform uses to
+All platforms can enable the GPIO library, but if the platform strictly
+requires GPIO functionality to be present, it needs to select GPIOLIB from its
+Kconfig. Then, how GPIOs are mapped depends on what the platform uses to
 describe its hardware layout. Currently, mappings can be defined through device
 tree, ACPI, and platform data.
 
diff --git a/Documentation/gpio/gpio-legacy.txt b/Documentation/gpio/gpio-legacy.txt
index 79ab5648d69b..b34fd94f7089 100644
--- a/Documentation/gpio/gpio-legacy.txt
+++ b/Documentation/gpio/gpio-legacy.txt
@@ -72,8 +72,8 @@ in this document, but drivers acting as clients to the GPIO interface must
 not care how it's implemented.)
 
 That said, if the convention is supported on their platform, drivers should
-use it when possible.  Platforms must select ARCH_REQUIRE_GPIOLIB or
-ARCH_WANT_OPTIONAL_GPIOLIB in their Kconfig.  Drivers that can't work without
+use it when possible.  Platforms must select GPIOLIB if GPIO functionality
+is strictly required.  Drivers that can't work without
 standard GPIO calls should have Kconfig entries which depend on GPIOLIB.  The
 GPIO calls are available, either as "real code" or as optimized-away stubs,
 when drivers use the include file:
@@ -553,22 +553,14 @@ either NULL or the label associated with that GPIO when it was requested.
 
 Platform Support
 ----------------
-To support this framework, a platform's Kconfig will "select" either
-ARCH_REQUIRE_GPIOLIB or ARCH_WANT_OPTIONAL_GPIOLIB
-and arrange that its <asm/gpio.h> includes <asm-generic/gpio.h> and defines
-three functions: gpio_get_value(), gpio_set_value(), and gpio_cansleep().
+To force-enable this framework, a platform's Kconfig will "select" GPIOLIB,
+else it is up to the user to configure support for GPIO.
 
 It may also provide a custom value for ARCH_NR_GPIOS, so that it better
 reflects the number of GPIOs in actual use on that platform, without
 wasting static table space.  (It should count both built-in/SoC GPIOs and
 also ones on GPIO expanders.
 
-ARCH_REQUIRE_GPIOLIB means that the gpiolib code will always get compiled
-into the kernel on that architecture.
-
-ARCH_WANT_OPTIONAL_GPIOLIB means the gpiolib code defaults to off and the user
-can enable it and build it into the kernel optionally.
-
 If neither of these options are selected, the platform does not support
 GPIOs through GPIO-lib and the code cannot be enabled by the user.
 
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index fcf05a07b06a..6fa1d8ab973c 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1374,6 +1374,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			Format: <unsigned int> such that (rxsize & ~0x1fffc0) == 0.
 			Default: 1024
 
+	gpio-mockup.gpio_mockup_ranges
+			[HW] Sets the ranges of gpiochip of for this device.
+			Format: <start1>,<end1>,<start2>,<end2>...
+
 	hardlockup_all_cpu_backtrace=
 			[KNL] Should the hard-lockup detector generate
 			backtraces on all cpus.