Merge tag 'usb-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt changes for 5.18-rc1.

  Nothing major in here, just lots of little improvements and cleanups
  and new device support. Highlights are:

   - list iterator fixups for when we walk past the end of the list (a
     common problem that was cut/pasted in almost all USB gadget
     drivers)

   - xen USB driver "hardening" for malicious hosts

   - xhci driver updates and fixes for more hardware types

   - xhci debug cable fixes to make it actually work again

   - usb gadget audio driver improvements

   - usb gadget storage fixes to work with OS-X

   - lots of other small usb gadget fixes and updates

   - USB DWC3 driver improvements for more hardware types

   - Lots of other small USB driver improvements

   - DTS updates for some USB platforms

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits)
  usb: gadget: fsl_qe_udc: Add missing semicolon in qe_ep_dequeue()
  dt-bindings: usb: mtk-xhci: add compatible for mt8186
  usb: dwc3: Issue core soft reset before enabling run/stop
  usb: gadget: Makefile: remove ccflags-y
  USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c
  usb: gadget: eliminate anonymous module_init & module_exit
  usb: usbip: eliminate anonymous module_init & module_exit
  xen/usb: harden xen_hcd against malicious backends
  usb: dwc3: gadget: Wait for ep0 xfers to complete during dequeue
  usb: dwc3: gadget: move cmd_endtransfer to extra function
  usb: dwc3: gadget: ep_queue simplify isoc start condition
  xen/usb: don't use arbitrary_virt_to_machine()
  usb: isp1760: remove redundant max_packet() macro
  usb: oxu210hp-hcd: remove redundant call to max_packet() macro
  usb: common: usb-conn-gpio: Make VBUS supply completely optional
  USB: storage: ums-realtek: fix error code in rts51x_read_mem()
  usb: early: xhci-dbc: Fix xdbc number parsing
  usb: early: xhci-dbc: Remove duplicate keep parsing
  x86/tsc: Be consistent about use_tsc_delay()
  usb: gadget: udc: s3c2410: remove usage of list iterator past the loop body
  ...

18 files changed, 617 insertions, 131 deletions

diff --git a/Documentation/ABI/testing/configfs-usb-gadget-uac1 b/Documentation/ABI/testing/configfs-usb-gadget-uac1
index d4b8cf40a9e4..c4ba92f004c3 100644
--- a/Documentation/ABI/testing/configfs-usb-gadget-uac1
+++ b/Documentation/ABI/testing/configfs-usb-gadget-uac1
@@ -6,7 +6,7 @@ Description:
 
 		=====================	=======================================
 		c_chmask		capture channel mask
-		c_srate			capture sampling rate
+		c_srate			list of capture sampling rates (comma-separated)
 		c_ssize			capture sample size (bytes)
 		c_mute_present		capture mute control enable
 		c_volume_present	capture volume control enable
@@ -17,7 +17,7 @@ Description:
 		c_volume_res		capture volume control resolution
 					(in 1/256 dB)
 		p_chmask		playback channel mask
-		p_srate			playback sampling rate
+		p_srate			list of playback sampling rates (comma-separated)
 		p_ssize			playback sample size (bytes)
 		p_mute_present		playback mute control enable
 		p_volume_present	playback volume control enable
@@ -29,4 +29,5 @@ Description:
 					(in 1/256 dB)
 		req_number		the number of pre-allocated requests
 					for both capture and playback
+		function_name		name of the interface
 		=====================	=======================================
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-uac2 b/Documentation/ABI/testing/configfs-usb-gadget-uac2
index 7fb3dbe26857..3371c39f651d 100644
--- a/Documentation/ABI/testing/configfs-usb-gadget-uac2
+++ b/Documentation/ABI/testing/configfs-usb-gadget-uac2
@@ -6,8 +6,9 @@ Description:
 
 		=====================	=======================================
 		c_chmask		capture channel mask
-		c_srate			capture sampling rate
+		c_srate			list of capture sampling rates (comma-separated)
 		c_ssize			capture sample size (bytes)
+		c_hs_bint		capture bInterval for HS/SS (1-4: fixed, 0: auto)
 		c_sync			capture synchronization type
 					(async/adaptive)
 		c_mute_present		capture mute control enable
@@ -20,8 +21,9 @@ Description:
 					(in 1/256 dB)
 		fb_max			maximum extra bandwidth in async mode
 		p_chmask		playback channel mask
-		p_srate			playback sampling rate
+		p_srate			list of playback sampling rates (comma-separated)
 		p_ssize			playback sample size (bytes)
+		p_hs_bint		playback bInterval for HS/SS (1-4: fixed, 0: auto)
 		p_mute_present		playback mute control enable
 		p_volume_present	playback volume control enable
 		p_volume_min		playback volume control min value
@@ -32,4 +34,5 @@ Description:
 					(in 1/256 dB)
 		req_number		the number of pre-allocated requests
 					for both capture and playback
+		function_name		name of the interface
 		=====================	=======================================
diff --git a/Documentation/ABI/testing/sysfs-driver-eud b/Documentation/ABI/testing/sysfs-driver-eud
new file mode 100644
index 000000000000..83f3872182a4
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-eud
@@ -0,0 +1,9 @@
+What:		/sys/bus/platform/drivers/eud/.../enable
+Date:           February 2022
+Contact:        Souradeep Chowdhury <quic_schowdhu@quicinc.com>
+Description:
+		The Enable/Disable sysfs interface for Embedded
+		USB Debugger(EUD). This enables and disables the
+		EUD based on a 1 or a 0 value. By enabling EUD,
+		the user is able to activate the mini-usb hub of
+		EUD for debug and trace capabilities.
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml
new file mode 100644
index 000000000000..c98aab209bc5
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/soc/qcom/qcom,eud.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Embedded USB Debugger
+
+maintainers:
+  - Souradeep Chowdhury <quic_schowdhu@quicinc.com>
+
+description:
+  This binding is used to describe the Qualcomm Embedded USB Debugger, which is
+  mini USB-hub implemented on chip to support USB-based debug capabilities.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,sc7280-eud
+      - const: qcom,eud
+
+  reg:
+    items:
+      - description: EUD Base Register Region
+      - description: EUD Mode Manager Register
+
+  interrupts:
+    description: EUD interrupt
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      These ports is to be attached to the endpoint of the DWC3 controller node
+      and type C connector node. The controller has the "usb-role-switch"
+      property.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: This port is to be attached to the DWC3 controller.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: This port is to be attached to the type C connector.
+
+required:
+  - compatible
+  - reg
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    eud@88e0000 {
+           compatible = "qcom,sc7280-eud","qcom,eud";
+           reg = <0x88e0000 0x2000>,
+                 <0x88e2000 0x1000>;
+           ports {
+                   #address-cells = <1>;
+                   #size-cells = <0>;
+                   port@0 {
+                           reg = <0>;
+                           eud_ep: endpoint {
+                                   remote-endpoint = <&usb2_role_switch>;
+                           };
+                   };
+                   port@1 {
+                           reg = <1>;
+                           eud_con: endpoint {
+                                   remote-endpoint = <&con_eud>;
+                           };
+                   };
+           };
+    };
diff --git a/Documentation/devicetree/bindings/usb/exynos-usb.txt b/Documentation/devicetree/bindings/usb/exynos-usb.txt
deleted file mode 100644
index f7ae79825d7d..000000000000
--- a/Documentation/devicetree/bindings/usb/exynos-usb.txt
+++ /dev/null
@@ -1,115 +0,0 @@
-Samsung Exynos SoC USB controller
-
-The USB devices interface with USB controllers on Exynos SOCs.
-The device node has following properties.
-
-EHCI
-Required properties:
- - compatible: should be "samsung,exynos4210-ehci" for USB 2.0
-   EHCI controller in host mode.
- - reg: physical base address of the controller and length of memory mapped
-   region.
- - interrupts: interrupt number to the cpu.
- - clocks: from common clock binding: handle to usb clock.
- - clock-names: from common clock binding: Shall be "usbhost".
- - phys: from the *Generic PHY* bindings; array specifying phy(s) used
-   by the root port.
- - phy-names: from the *Generic PHY* bindings; array of the names for
-   each phy for the root ports, must be a subset of the following:
-   "host", "hsic0", "hsic1".
-
-Optional properties:
- - samsung,vbus-gpio:  if present, specifies the GPIO that
-   needs to be pulled up for the bus to be powered.
-
-Example:
-
-	usb@12110000 {
-		compatible = "samsung,exynos4210-ehci";
-		reg = <0x12110000 0x100>;
-		interrupts = <0 71 0>;
-		samsung,vbus-gpio = <&gpx2 6 1 3 3>;
-
-		clocks = <&clock 285>;
-		clock-names = "usbhost";
-
-		phys = <&usb2phy 1>;
-		phy-names = "host";
-	};
-
-OHCI
-Required properties:
- - compatible: should be "samsung,exynos4210-ohci" for USB 2.0
-   OHCI companion controller in host mode.
- - reg: physical base address of the controller and length of memory mapped
-   region.
- - interrupts: interrupt number to the cpu.
- - clocks: from common clock binding: handle to usb clock.
- - clock-names: from common clock binding: Shall be "usbhost".
- - phys: from the *Generic PHY* bindings; array specifying phy(s) used
-   by the root port.
- - phy-names: from the *Generic PHY* bindings; array of the names for
-   each phy for the root ports, must be a subset of the following:
-   "host", "hsic0", "hsic1".
-
-Example:
-	usb@12120000 {
-		compatible = "samsung,exynos4210-ohci";
-		reg = <0x12120000 0x100>;
-		interrupts = <0 71 0>;
-
-		clocks = <&clock 285>;
-		clock-names = "usbhost";
-
-		phys = <&usb2phy 1>;
-		phy-names = "host";
-	};
-
-DWC3
-Required properties:
- - compatible: should be one of the following -
-	       "samsung,exynos5250-dwusb3": for USB 3.0 DWC3 controller on
-					    Exynos5250/5420.
-	       "samsung,exynos5433-dwusb3": for USB 3.0 DWC3 controller on
-					    Exynos5433.
-	       "samsung,exynos7-dwusb3": for USB 3.0 DWC3 controller on Exynos7.
- - #address-cells, #size-cells : should be '1' if the device has sub-nodes
-				 with 'reg' property.
- - ranges: allows valid 1:1 translation between child's address space and
-	   parent's address space
- - clocks: Clock IDs array as required by the controller.
- - clock-names: Names of clocks corresponding to IDs in the clock property.
-                Following clock names shall be provided for different
-                compatibles:
-                 - samsung,exynos5250-dwusb3: "usbdrd30",
-                 - samsung,exynos5433-dwusb3: "aclk", "susp_clk", "pipe_pclk",
-                                              "phyclk",
-                 - samsung,exynos7-dwusb3: "usbdrd30", "usbdrd30_susp_clk",
-                                           "usbdrd30_axius_clk"
- - vdd10-supply: 1.0V powr supply
- - vdd33-supply: 3.0V/3.3V power supply
-
-Sub-nodes:
-The dwc3 core should be added as subnode to Exynos dwc3 glue.
-- dwc3 :
-   The binding details of dwc3 can be found in:
-   Documentation/devicetree/bindings/usb/snps,dwc3.yaml
-
-Example:
-	usb@12000000 {
-		compatible = "samsung,exynos5250-dwusb3";
-		clocks = <&clock 286>;
-		clock-names = "usbdrd30";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		vdd10-supply = <&ldo11_reg>;
-		vdd33-supply = <&ldo9_reg>;
-
-		dwc3 {
-			compatible = "synopsys,dwc3";
-			reg = <0x12000000 0x10000>;
-			interrupts = <0 72 0>;
-			usb-phy = <&usb2_phy &usb3_phy>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml
index 974032b1fda0..01ab0f922ae8 100644
--- a/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml
@@ -15,9 +15,9 @@ properties:
     const: fsl,imx8mp-dwc3
 
   reg:
-    maxItems: 1
-    description: Address and length of the register set for the wrapper of
-      dwc3 core on the SOC.
+    items:
+      - description: Address and length of the register set for HSIO Block Control
+      - description: Address and length of the register set for the wrapper of dwc3 core on the SOC.
 
   "#address-cells":
     enum: [ 1, 2 ]
@@ -49,6 +49,28 @@ properties:
       - const: hsio
       - const: suspend
 
+  fsl,permanently-attached:
+    type: boolean
+    description:
+      Indicates if the device atached to a downstream port is
+      permanently attached.
+
+  fsl,disable-port-power-control:
+    type: boolean
+    description:
+      Indicates whether the host controller implementation includes port
+      power control. Defines Bit 3 in capability register (HCCPARAMS).
+
+  fsl,over-current-active-low:
+    type: boolean
+    description:
+      Over current signal polarity is active low.
+
+  fsl,power-active-low:
+    type: boolean
+    description:
+      Power pad (PWR) polarity is active low.
+
 # Required child node:
 
 patternProperties:
@@ -74,7 +96,8 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     usb3_0: usb@32f10100 {
       compatible = "fsl,imx8mp-dwc3";
-      reg = <0x32f10100 0x8>;
+      reg = <0x32f10100 0x8>,
+            <0x381f0000 0x20>;
       clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
                <&clk IMX8MP_CLK_USB_ROOT>;
       clock-names = "hsio", "suspend";
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
index 11f7bacd4e2b..084d7135b2d9 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
@@ -30,6 +30,7 @@ properties:
           - mediatek,mt7629-xhci
           - mediatek,mt8173-xhci
           - mediatek,mt8183-xhci
+          - mediatek,mt8186-xhci
           - mediatek,mt8192-xhci
           - mediatek,mt8195-xhci
       - const: mediatek,mtk-xhci
@@ -146,7 +147,11 @@ properties:
             2 - used by mt2712 etc, revision 2 following IPM rule;
             101 - used by mt8183, specific 1.01;
             102 - used by mt8192, specific 1.02;
-          enum: [1, 2, 101, 102]
+            103 - used by mt8195, IP0, specific 1.03;
+            104 - used by mt8195, IP1, specific 1.04;
+            105 - used by mt8195, IP2, specific 1.05;
+            106 - used by mt8195, IP3, specific 1.06;
+          enum: [1, 2, 101, 102, 103, 104, 105, 106]
 
   mediatek,u3p-dis-msk:
     $ref: /schemas/types.yaml#/definitions/uint32
diff --git a/Documentation/devicetree/bindings/usb/microchip,mpfs-musb.yaml b/Documentation/devicetree/bindings/usb/microchip,mpfs-musb.yaml
new file mode 100644
index 000000000000..48c458c65848
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/microchip,mpfs-musb.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/microchip,mpfs-musb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MPFS USB Controller Device Tree Bindings
+
+allOf:
+  - $ref: usb-drd.yaml#
+
+maintainers:
+  - Conor Dooley <conor.dooley@microchip.com>
+
+properties:
+  compatible:
+    enum:
+      - microchip,mpfs-musb
+
+  dr_mode: true
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 2
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: dma
+      - const: mc
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include "dt-bindings/clock/microchip,mpfs-clock.h"
+    usb@20201000 {
+        compatible = "microchip,mpfs-musb";
+        reg = <0x20201000 0x1000>;
+        clocks = <&clkcfg CLK_USB>;
+        interrupt-parent = <&plic>;
+        interrupts = <86>, <87>;
+        interrupt-names = "dma", "mc";
+        dr_mode = "host";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
index 2d23a4ff702f..ce252db2aab3 100644
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
@@ -16,6 +16,7 @@ properties:
           - qcom,ipq4019-dwc3
           - qcom,ipq6018-dwc3
           - qcom,ipq8064-dwc3
+          - qcom,msm8953-dwc3
           - qcom,msm8996-dwc3
           - qcom,msm8998-dwc3
           - qcom,sc7180-dwc3
diff --git a/Documentation/devicetree/bindings/usb/richtek,rt1719.yaml b/Documentation/devicetree/bindings/usb/richtek,rt1719.yaml
new file mode 100644
index 000000000000..65a93f7738d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/richtek,rt1719.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/usb/richtek,rt1719.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Richtek RT1719 sink-only Type-C PD controller bindings
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RT1719 is a sink-only USB Type-C contoller that complies with the latest
+  USB Type-C and PD standards. It does the USB Type-C detection including attach
+  and orientation. It integrates the physical layer of the USB BMC power
+  delivery protocol to allow up to 100W of power. The BMC PD block enables full
+  support for alternative interfaces of the Type-C specification.
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt1719
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  wakeup-source:
+    description: enable IRQ remote wakeup, see power/wakeup-source.txt
+    type: boolean
+
+  connector:
+    type: object
+    $ref: ../connector/usb-connector.yaml#
+    description:
+      Properties for usb c connector.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - connector
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      rt1719@43 {
+        compatible = "richtek,rt1719";
+        reg = <0x43>;
+        interrupts-extended = <&gpio26 2 IRQ_TYPE_LEVEL_LOW>;
+        wakeup-source;
+
+        connector {
+          compatible = "usb-c-connector";
+          label = "USB-C";
+
+          ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+              reg = <0>;
+              endpoint {
+                remote-endpoint = <&usb_hs>;
+              };
+            };
+            port@1 {
+              reg = <1>;
+              endpoint {
+                remote-endpoint = <&usb_ss>;
+              };
+            };
+          };
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml b/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml
index 04077f2d7faf..b3798d94d2fd 100644
--- a/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml
@@ -30,6 +30,7 @@ select:
         enum:
           - rockchip,rk3328-dwc3
           - rockchip,rk3399-dwc3
+          - rockchip,rk3568-dwc3
   required:
     - compatible
 
@@ -39,6 +40,7 @@ properties:
       - enum:
           - rockchip,rk3328-dwc3
           - rockchip,rk3399-dwc3
+          - rockchip,rk3568-dwc3
       - const: snps,dwc3
 
   reg:
diff --git a/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml b/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml
new file mode 100644
index 000000000000..22b91a27d776
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/samsung,exynos-dwc3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC USB 3.0 DWC3 Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos5250-dwusb3
+      - samsung,exynos5433-dwusb3
+      - samsung,exynos7-dwusb3
+
+  '#address-cells':
+    const: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+
+  ranges: true
+
+  '#size-cells':
+    const: 1
+
+  vdd10-supply:
+    description: 1.0V power supply
+
+  vdd33-supply:
+    description: 3.0V/3.3V power supply
+
+patternProperties:
+  "^usb@[0-9a-f]+$":
+    $ref: snps,dwc3.yaml#
+    description: Required child node
+
+required:
+  - compatible
+  - '#address-cells'
+  - clocks
+  - clock-names
+  - ranges
+  - '#size-cells'
+  - vdd10-supply
+  - vdd33-supply
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5250-dwusb3
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: usbdrd30
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos54333-dwusb3
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: aclk
+            - const: susp_clk
+            - const: pipe_pclk
+            - const: phyclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-dwusb3
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: usbdrd30
+            - const: usbdrd30_susp_clk
+            - const: usbdrd30_axius_clk
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5420.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    usb {
+        compatible = "samsung,exynos5250-dwusb3";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+        clocks = <&clock CLK_USBD300>;
+        clock-names = "usbdrd30";
+        vdd33-supply = <&ldo9_reg>;
+        vdd10-supply = <&ldo11_reg>;
+
+        usb@12000000 {
+            compatible = "snps,dwc3";
+            reg = <0x12000000 0x10000>;
+            interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+            phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
+            phy-names = "usb2-phy", "usb3-phy";
+            snps,dis_u3_susphy_quirk;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/usb/samsung,exynos-usb2.yaml b/Documentation/devicetree/bindings/usb/samsung,exynos-usb2.yaml
new file mode 100644
index 000000000000..fbf07d6e707a
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/samsung,exynos-usb2.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/samsung,exynos-usb2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC USB 2.0 EHCI/OHCI Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos4210-ehci
+      - samsung,exynos4210-ohci
+
+  '#address-cells':
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: usbhost
+
+  interrupts:
+    maxItems: 1
+
+  phys:
+    minItems: 1
+    maxItems: 3
+
+  phy-names:
+    items:
+      enum: [host, hsic0, hsic1]
+    minItems: 1
+    maxItems: 3
+
+  reg:
+    maxItems: 1
+
+  samsung,vbus-gpio:
+    description:
+      Only for controller in EHCI mode, if present, specifies the GPIO that
+      needs to be pulled up for the bus to be powered.
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^.*@[0-9a-f]{1,2}$":
+    description: The hard wired USB devices
+    type: object
+    $ref: /usb/usb-device.yaml
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - phys
+  - phy-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos4210-ohci
+    then:
+      properties:
+        samsung,vbus-gpio: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5420.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    usb@12110000 {
+        compatible = "samsung,exynos4210-ehci";
+        reg = <0x12110000 0x100>;
+        interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clock CLK_USBH20>;
+        clock-names = "usbhost";
+        phys = <&usb2_phy 0>;
+        phy-names = "host";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hub@1 {
+            compatible = "usb0424,9514";
+            reg = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            usbether@1 {
+                compatible = "usb0424,ec00";
+                reg = <1>;
+                local-mac-address = [00 00 00 00 00 00];
+            };
+        };
+    };
+
+    usb@12120000 {
+        compatible = "samsung,exynos4210-ohci";
+        reg = <0x12120000 0x100>;
+        interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clock CLK_USBH20>;
+        clock-names = "usbhost";
+        phys = <&usb2_phy 0>;
+        phy-names = "host";
+    };
diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
index d29ffcd27472..f4471f8bdbef 100644
--- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
@@ -263,8 +263,11 @@ properties:
       Value for REFCLKPER field of GUCTL register for reference clock period in
       nanoseconds, when the hardware set default does not match the actual
       clock.
-    minimum: 1
-    maximum: 0x3ff
+
+      This binding is deprecated. Instead, provide an appropriate reference clock.
+    minimum: 8
+    maximum: 62
+    deprecated: true
 
   snps,rx-thr-num-pkt-prd:
     description:
@@ -332,6 +335,12 @@ properties:
     items:
       enum: [1, 4, 8, 16, 32, 64, 128, 256]
 
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      This port is used with the 'usb-role-switch' property  to connect the
+      dwc3 to type C connector.
+
 unevaluatedProperties: false
 
 required:
diff --git a/Documentation/devicetree/bindings/usb/usb-hcd.yaml b/Documentation/devicetree/bindings/usb/usb-hcd.yaml
index 56853c17af66..1dc3d5d7b44f 100644
--- a/Documentation/devicetree/bindings/usb/usb-hcd.yaml
+++ b/Documentation/devicetree/bindings/usb/usb-hcd.yaml
@@ -33,7 +33,7 @@ patternProperties:
   "^.*@[0-9a-f]{1,2}$":
     description: The hard wired USB devices
     type: object
-    $ref: /usb/usb-device.yaml
+    $ref: /schemas/usb/usb-device.yaml
 
 additionalProperties: true
 
diff --git a/Documentation/devicetree/bindings/usb/willsemi,wusb3801.yaml b/Documentation/devicetree/bindings/usb/willsemi,wusb3801.yaml
new file mode 100644
index 000000000000..c2b2243c7892
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/willsemi,wusb3801.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/willsemi,wusb3801.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: WUSB3801 Type-C port controller DT bindings
+
+description:
+  The Will Semiconductor WUSB3801 is a USB Type-C port controller which
+  supports role and plug orientation detection using the CC pins. It is
+  compatible with the USB Type-C Cable and Connector Specification v1.2.
+
+maintainers:
+  - Samuel Holland <samuel@sholland.org>
+
+properties:
+  compatible:
+    enum:
+      - willsemi,wusb3801
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  connector:
+    type: object
+    $ref: ../connector/usb-connector.yaml#
+    description:
+      The managed USB Type-C connector. Since WUSB3801 does not support
+      Power Delivery, the node should have the "pd-disable" property.
+
+    properties:
+      compatible:
+        const: usb-c-connector
+
+    required:
+      - pd-disable
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - connector
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      tcpc@60 {
+        compatible = "willsemi,wusb3801";
+        reg = <0x60>;
+        interrupt-parent = <&gpio0>;
+        interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+
+        connector {
+          compatible = "usb-c-connector";
+          label = "USB-C";
+          vbus-supply = <&otg_switch>;
+          power-role = "dual";
+          try-power-role = "sink";
+          data-role = "dual";
+          typec-power-opmode = "default";
+          pd-disable;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index bb372e15bba4..c57367f582f4 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -1371,6 +1371,8 @@ patternProperties:
     description: Wi2Wi, Inc.
   "^wiligear,.*":
     description: Wiligear, Ltd.
+  "^willsemi,.*":
+    description: Will Semiconductor Ltd.
   "^winbond,.*":
     description: Winbond Electronics corp.
   "^wingtech,.*":
diff --git a/Documentation/usb/gadget-testing.rst b/Documentation/usb/gadget-testing.rst
index cbbd948c626f..c6d034abce3a 100644
--- a/Documentation/usb/gadget-testing.rst
+++ b/Documentation/usb/gadget-testing.rst
@@ -726,7 +726,7 @@ The uac2 function provides these attributes in its function directory:
 
 	================ ====================================================
 	c_chmask         capture channel mask
-	c_srate          capture sampling rate
+	c_srate          list of capture sampling rates (comma-separated)
 	c_ssize          capture sample size (bytes)
 	c_sync           capture synchronization type (async/adaptive)
 	c_mute_present   capture mute control enable
@@ -734,17 +734,20 @@ The uac2 function provides these attributes in its function directory:
 	c_volume_min     capture volume control min value (in 1/256 dB)
 	c_volume_max     capture volume control max value (in 1/256 dB)
 	c_volume_res     capture volume control resolution (in 1/256 dB)
+	c_hs_bint        capture bInterval for HS/SS (1-4: fixed, 0: auto)
 	fb_max           maximum extra bandwidth in async mode
 	p_chmask         playback channel mask
-	p_srate          playback sampling rate
+	p_srate          list of playback sampling rates (comma-separated)
 	p_ssize          playback sample size (bytes)
 	p_mute_present   playback mute control enable
 	p_volume_present playback volume control enable
 	p_volume_min     playback volume control min value (in 1/256 dB)
 	p_volume_max     playback volume control max value (in 1/256 dB)
 	p_volume_res     playback volume control resolution (in 1/256 dB)
+	p_hs_bint        playback bInterval for HS/SS (1-4: fixed, 0: auto)
 	req_number       the number of pre-allocated request for both capture
 	                 and playback
+	function_name    name of the interface
 	================ ====================================================
 
 The attributes have sane default values.
@@ -916,7 +919,7 @@ The uac1 function provides these attributes in its function directory:
 
 	================ ====================================================
 	c_chmask         capture channel mask
-	c_srate          capture sampling rate
+	c_srate          list of capture sampling rates (comma-separated)
 	c_ssize          capture sample size (bytes)
 	c_mute_present   capture mute control enable
 	c_volume_present capture volume control enable
@@ -924,7 +927,7 @@ The uac1 function provides these attributes in its function directory:
 	c_volume_max     capture volume control max value (in 1/256 dB)
 	c_volume_res     capture volume control resolution (in 1/256 dB)
 	p_chmask         playback channel mask
-	p_srate          playback sampling rate
+	p_srate          list of playback sampling rates (comma-separated)
 	p_ssize          playback sample size (bytes)
 	p_mute_present   playback mute control enable
 	p_volume_present playback volume control enable
@@ -933,6 +936,7 @@ The uac1 function provides these attributes in its function directory:
 	p_volume_res     playback volume control resolution (in 1/256 dB)
 	req_number       the number of pre-allocated requests for both capture
 	                 and playback
+	function_name    name of the interface
 	================ ====================================================
 
 The attributes have sane default values.