Merge tag 'regulator-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "Quite a lot going on with the regulator API for this release, much
  more in the core than in the drivers for a change:

   - Fixes for voltage change propagation through dumb power switches.

   - A notification when regulators are enabled.

   - A new settling time property for regulators where the time taken to
     move to a new voltage is not related to the size of the change.

   - Some reorganization of the Arizona drivers in preparation for
     sharing the code with the next generation devices they've been
     integrated with.

   - Support for newer Freescale chips in the Anatop regulator.

   - A new driver for voltage controlled regulators to cope with some
     exciting ChromeOS hardware designs.

   - Support for Rohm BD9571MWV-M and TI TPS65132"

* tag 'regulator-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (51 commits)
  regulator: Add ROHM BD9571MWV-M PMIC regulator driver
  regulator: arizona-ldo1: Factor out generic initialization
  regulator: arizona-ldo1: Make arizona_ldo1 independent of struct arizona
  regulator: arizona-ldo1: Move pdata into a separate structure
  regulator: arizona-micsupp: Factor out generic initialization
  regulator: arizona-micsupp: Make arizona_micsupp independent of struct arizona
  regulator: arizona-micsupp: Move pdata into a separate structure
  regulator: arizona: Split KConfig options for LDO1 and MICSUPP regulators
  regulator: anatop: make regulator name property required
  regulator: tps65023: Fix inverted core enable logic.
  regulator: anatop: make sure regulator name is properly defined
  regulator: core: Allow dummy regulators for supplies
  regulator: core: Only propagate voltage changes to if it can change voltages
  regulator: vctrl: Fix out of bounds array access for vctrl->vtable
  regulator: tps65132: fix platform_no_drv_owner.cocci warnings
  regulator: tps65132: Fix off-by-one for .max_register setting
  regulator: anatop: set default voltage selector for pcie
  regulator: tps65132: add device-tree binding
  regulator: tps65132: add regulator driver for TI TPS65132
  regulator: anatop: remove unneeded name field of struct anatop_regulator
  ...

6 files changed, 182 insertions, 3 deletions

diff --git a/Documentation/devicetree/bindings/regulator/anatop-regulator.txt b/Documentation/devicetree/bindings/regulator/anatop-regulator.txt
index 1d58c8cfdbc0..a3106c72fbea 100644
--- a/Documentation/devicetree/bindings/regulator/anatop-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/anatop-regulator.txt
@@ -2,6 +2,7 @@ Anatop Voltage regulators
 
 Required properties:
 - compatible: Must be "fsl,anatop-regulator"
+- regulator-name: A string used as a descriptive name for regulator outputs
 - anatop-reg-offset: Anatop MFD register offset
 - anatop-vol-bit-shift: Bit shift for the register
 - anatop-vol-bit-width: Number of bits used in the register
diff --git a/Documentation/devicetree/bindings/regulator/lm363x-regulator.txt b/Documentation/devicetree/bindings/regulator/lm363x-regulator.txt
index 8f14df9d1205..cc5a6151d85f 100644
--- a/Documentation/devicetree/bindings/regulator/lm363x-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/lm363x-regulator.txt
@@ -8,8 +8,8 @@ Required property:
 
 Optional properties:
   LM3632 has external enable pins for two LDOs.
-  - ti,lcm-en1-gpio: A GPIO specifier for Vpos control pin.
-  - ti,lcm-en2-gpio: A GPIO specifier for Vneg control pin.
+  - enable-gpios: Two GPIO specifiers for Vpos and Vneg control pins.
+                  The first entry is Vpos, the second is Vneg enable pin.
 
 Child nodes:
   LM3631
@@ -30,5 +30,79 @@ Child nodes:
 
 Examples: Please refer to ti-lmu dt-bindings [2].
 
+lm3631@29 {
+	compatible = "ti,lm3631";
+	reg = <0x29>;
+
+	regulators {
+		compatible = "ti,lm363x-regulator";
+
+		vboost {
+			regulator-name = "lcd_boost";
+			regulator-min-microvolt = <4500000>;
+			regulator-max-microvolt = <6350000>;
+			regulator-always-on;
+		};
+
+		vcont {
+			regulator-name = "lcd_vcont";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		voref {
+			regulator-name = "lcd_voref";
+			regulator-min-microvolt = <4000000>;
+			regulator-max-microvolt = <6000000>;
+		};
+
+		vpos {
+			regulator-name = "lcd_vpos";
+			regulator-min-microvolt = <4000000>;
+			regulator-max-microvolt = <6000000>;
+			regulator-boot-on;
+		};
+
+		vneg {
+			regulator-name = "lcd_vneg";
+			regulator-min-microvolt = <4000000>;
+			regulator-max-microvolt = <6000000>;
+			regulator-boot-on;
+		};
+	};
+};
+
+lm3632@11 {
+	compatible = "ti,lm3632";
+	reg = <0x11>;
+
+	regulators {
+		compatible = "ti,lm363x-regulator";
+
+		/* GPIO1_16 for Vpos, GPIO1_28 is for Vneg */
+		enable-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>,
+				<&gpio1 28 GPIO_ACTIVE_HIGH>;
+
+		vboost {
+			regulator-name = "lcd_boost";
+			regulator-min-microvolt = <4500000>;
+			regulator-max-microvolt = <6400000>;
+			regulator-always-on;
+		};
+
+		vpos {
+			regulator-name = "lcd_vpos";
+			regulator-min-microvolt = <4000000>;
+			regulator-max-microvolt = <6000000>;
+		};
+
+		vneg {
+			regulator-name = "lcd_vneg";
+			regulator-min-microvolt = <4000000>;
+			regulator-max-microvolt = <6000000>;
+		};
+	};
+};
+
 [1] ../regulator/regulator.txt
 [2] ../mfd/ti-lmu.txt
diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.txt b/Documentation/devicetree/bindings/regulator/pfuze100.txt
index 9b40db88f637..444c47831a40 100644
--- a/Documentation/devicetree/bindings/regulator/pfuze100.txt
+++ b/Documentation/devicetree/bindings/regulator/pfuze100.txt
@@ -13,7 +13,7 @@ Required child node:
   --PFUZE100
   sw1ab,sw1c,sw2,sw3a,sw3b,sw4,swbst,vsnvs,vrefddr,vgen1~vgen6
   --PFUZE200
-  sw1ab,sw2,sw3a,sw3b,swbst,vsnvs,vrefddr,vgen1~vgen6
+  sw1ab,sw2,sw3a,sw3b,swbst,vsnvs,vrefddr,vgen1~vgen6,coin
   --PFUZE3000
   sw1a,sw1b,sw2,sw3,swbst,vsnvs,vrefddr,vldo1,vldo2,vccsd,v33,vldo3,vldo4
 
@@ -205,6 +205,12 @@ Example 2: PFUZE200
 				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
 			};
+
+			coin_reg: coin {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
 		};
 	};
 
diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt
index 6ab5aef619d9..d18edb075e1c 100644
--- a/Documentation/devicetree/bindings/regulator/regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/regulator.txt
@@ -21,6 +21,9 @@ Optional properties:
   design requires. This property describes the total system ramp time
   required due to the combination of internal ramping of the regulator itself,
   and board design issues such as trace capacitance and load on the supply.
+- regulator-settling-time-us: Settling time, in microseconds, for voltage
+  change if regulator have the constant time for any level voltage change.
+  This is useful when regulator have exponential voltage change.
 - regulator-soft-start: Enable soft start so that voltage ramps slowly
 - regulator-state-mem sub-root node for Suspend-to-RAM mode
   : suspend to memory, the device goes to sleep, but all data stored in memory,
diff --git a/Documentation/devicetree/bindings/regulator/tps65132-regulator.txt b/Documentation/devicetree/bindings/regulator/tps65132-regulator.txt
new file mode 100644
index 000000000000..3a3505520c69
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/tps65132-regulator.txt
@@ -0,0 +1,46 @@
+TPS65132 regulators
+
+Required properties:
+- compatible: "ti,tps65132"
+- reg: I2C slave address
+
+Optional Subnode:
+Device supports two regulators OUTP and OUTN. A sub node within the
+   device node describe the properties of these regulators. The sub-node
+   names must be as follows:
+	-For regulator outp, the sub node name should be "outp".
+	-For regulator outn, the sub node name should be "outn".
+
+-enable-gpios:(active high, output) Regulators are controlled by the input pins.
+   If it is connected to GPIO through host system then provide the
+   gpio number as per gpio.txt.
+-active-discharge-gpios: (active high, output) Some configurations use delay mechanisms
+  on the enable pin, to keep the regulator enabled for some time after
+  the enable signal goes low. This GPIO is used to actively discharge
+  the delay mechanism. Requires specification of ti,active-discharge-time-us
+-ti,active-discharge-time-us: how long the active discharge gpio should be
+  asserted for during active discharge, in microseconds.
+
+Each regulator is defined using the standard binding for regulators.
+
+Example:
+
+	tps65132@3e {
+		compatible = "ti,tps65132";
+		reg = <0x3e>;
+
+		outp {
+			regulator-name = "outp";
+			regulator-boot-on;
+			regulator-always-on;
+			enable-gpios = <&gpio 23 0>;
+		};
+
+		outn {
+			regulator-name = "outn";
+			regulator-boot-on;
+			regulator-always-on;
+			regulator-active-discharge = <0>;
+			enable-gpios = <&gpio 40 0>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/regulator/vctrl.txt b/Documentation/devicetree/bindings/regulator/vctrl.txt
new file mode 100644
index 000000000000..601328d7fdbb
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/vctrl.txt
@@ -0,0 +1,49 @@
+Bindings for Voltage controlled regulators
+==========================================
+
+Required properties:
+--------------------
+- compatible		  : must be "vctrl-regulator".
+- regulator-min-microvolt : smallest voltage consumers may set
+- regulator-max-microvolt : largest voltage consumers may set
+- ctrl-supply		  : The regulator supplying the control voltage.
+- ctrl-voltage-range	  : an array of two integer values describing the range
+			    (min/max) of the control voltage. The values specify
+			    the control voltage needed to generate the corresponding
+			    regulator-min/max-microvolt output voltage.
+
+Optional properties:
+--------------------
+- ovp-threshold-percent	: overvoltage protection (OVP) threshold of the
+			  regulator in percent. Some regulators have an OVP
+			  circuitry which shuts down the regulator when the
+			  actual output voltage deviates beyond a certain
+			  margin from the expected value for a given control
+			  voltage. On larger voltage decreases this can occur
+			  undesiredly since the output voltage does not adjust
+			  inmediately to changes in the control voltage. To
+			  avoid this situation the vctrl driver breaks down
+			  larger voltage decreases into multiple steps, where
+			  each step is within the OVP threshold.
+- min-slew-down-rate	: Describes how slowly the regulator voltage will decay
+			  down in the worst case (lightest expected load).
+			  Specified in uV / us (like main regulator ramp rate).
+			  This value is required when ovp-threshold-percent is
+			  specified.
+
+Example:
+
+	vctrl-reg {
+		compatible = "vctrl-regulator";
+		regulator-name = "vctrl_reg";
+
+		ctrl-supply = <&ctrl_reg>;
+
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1500000>;
+
+		ctrl-voltage-range = <200000 500000>;
+
+		min-slew-down-rate = <225>;
+		ovp-threshold-percent = <16>;
+	};