Merge branch 'linus' into x86/step

7 files changed, 281 insertions, 57 deletions

diff --git a/Documentation/ABI/testing/sysfs-firmware-acpi b/Documentation/ABI/testing/sysfs-firmware-acpi
index 9470ed9afcc0..f27be7d1a49f 100644
--- a/Documentation/ABI/testing/sysfs-firmware-acpi
+++ b/Documentation/ABI/testing/sysfs-firmware-acpi
@@ -29,46 +29,46 @@ Description:
 
 		$ cd /sys/firmware/acpi/interrupts
 		$ grep . *
-		error:0
-		ff_gbl_lock:0
-		ff_pmtimer:0
-		ff_pwr_btn:0
-		ff_rt_clk:0
-		ff_slp_btn:0
-		gpe00:0
-		gpe01:0
-		gpe02:0
-		gpe03:0
-		gpe04:0
-		gpe05:0
-		gpe06:0
-		gpe07:0
-		gpe08:0
-		gpe09:174
-		gpe0A:0
-		gpe0B:0
-		gpe0C:0
-		gpe0D:0
-		gpe0E:0
-		gpe0F:0
-		gpe10:0
-		gpe11:60
-		gpe12:0
-		gpe13:0
-		gpe14:0
-		gpe15:0
-		gpe16:0
-		gpe17:0
-		gpe18:0
-		gpe19:7
-		gpe1A:0
-		gpe1B:0
-		gpe1C:0
-		gpe1D:0
-		gpe1E:0
-		gpe1F:0
-		gpe_all:241
-		sci:241
+		error:	     0
+		ff_gbl_lock:	   0   enable
+		ff_pmtimer:	  0  invalid
+		ff_pwr_btn:	  0   enable
+		ff_rt_clk:	 2  disable
+		ff_slp_btn:	  0  invalid
+		gpe00:	     0	invalid
+		gpe01:	     0	 enable
+		gpe02:	   108	 enable
+		gpe03:	     0	invalid
+		gpe04:	     0	invalid
+		gpe05:	     0	invalid
+		gpe06:	     0	 enable
+		gpe07:	     0	 enable
+		gpe08:	     0	invalid
+		gpe09:	     0	invalid
+		gpe0A:	     0	invalid
+		gpe0B:	     0	invalid
+		gpe0C:	     0	invalid
+		gpe0D:	     0	invalid
+		gpe0E:	     0	invalid
+		gpe0F:	     0	invalid
+		gpe10:	     0	invalid
+		gpe11:	     0	invalid
+		gpe12:	     0	invalid
+		gpe13:	     0	invalid
+		gpe14:	     0	invalid
+		gpe15:	     0	invalid
+		gpe16:	     0	invalid
+		gpe17:	  1084	 enable
+		gpe18:	     0	 enable
+		gpe19:	     0	invalid
+		gpe1A:	     0	invalid
+		gpe1B:	     0	invalid
+		gpe1C:	     0	invalid
+		gpe1D:	     0	invalid
+		gpe1E:	     0	invalid
+		gpe1F:	     0	invalid
+		gpe_all:    1192
+		sci:	1194
 
 		sci - The total number of times the ACPI SCI
 		has claimed an interrupt.
@@ -89,6 +89,13 @@ Description:
 
 		error - an interrupt that can't be accounted for above.
 
+		invalid: it's either a wakeup GPE or a GPE/Fixed Event that
+			doesn't have an event handler.
+
+		disable: the GPE/Fixed Event is valid but disabled.
+
+		enable: the GPE/Fixed Event is valid and enabled.
+
 		Root has permission to clear any of these counters.  Eg.
 		# echo 0 > gpe11
 
@@ -97,3 +104,43 @@ Description:
 
 		None of these counters has an effect on the function
 		of the system, they are simply statistics.
+
+		Besides this, user can also write specific strings to these files
+		to enable/disable/clear ACPI interrupts in user space, which can be
+		used to debug some ACPI interrupt storm issues.
+
+		Note that only writting to VALID GPE/Fixed Event is allowed,
+		i.e. user can only change the status of runtime GPE and
+		Fixed Event with event handler installed.
+
+		Let's take power button fixed event for example, please kill acpid
+		and other user space applications so that the machine won't shutdown
+		when pressing the power button.
+		# cat ff_pwr_btn
+		0
+		# press the power button for 3 times;
+		# cat ff_pwr_btn
+		3
+		# echo disable > ff_pwr_btn
+		# cat ff_pwr_btn
+		disable
+		# press the power button for 3 times;
+		# cat ff_pwr_btn
+		disable
+		# echo enable > ff_pwr_btn
+		# cat ff_pwr_btn
+		4
+		/*
+		 * this is because the status bit is set even if the enable bit is cleared,
+		 * and it triggers an ACPI fixed event when the enable bit is set again
+		 */
+		# press the power button for 3 times;
+		# cat ff_pwr_btn
+		7
+		# echo disable > ff_pwr_btn
+		# press the power button for 3 times;
+		# echo clear > ff_pwr_btn	/* clear the status bit */
+		# echo disable > ff_pwr_btn
+		# cat ff_pwr_btn
+		7
+
diff --git a/Documentation/filesystems/configfs/configfs.txt b/Documentation/filesystems/configfs/configfs.txt
index 44c97e6accb2..15838d706ea2 100644
--- a/Documentation/filesystems/configfs/configfs.txt
+++ b/Documentation/filesystems/configfs/configfs.txt
@@ -233,10 +233,12 @@ accomplished via the group operations specified on the group's
 config_item_type.
 
 	struct configfs_group_operations {
-		struct config_item *(*make_item)(struct config_group *group,
-						 const char *name);
-		struct config_group *(*make_group)(struct config_group *group,
-						   const char *name);
+		int (*make_item)(struct config_group *group,
+				 const char *name,
+				 struct config_item **new_item);
+		int (*make_group)(struct config_group *group,
+				  const char *name,
+				  struct config_group **new_group);
 		int (*commit_item)(struct config_item *item);
 		void (*disconnect_notify)(struct config_group *group,
 					  struct config_item *item);
diff --git a/Documentation/filesystems/configfs/configfs_example.c b/Documentation/filesystems/configfs/configfs_example.c
index 25151fd5c2c6..0b422acd470c 100644
--- a/Documentation/filesystems/configfs/configfs_example.c
+++ b/Documentation/filesystems/configfs/configfs_example.c
@@ -273,13 +273,13 @@ static inline struct simple_children *to_simple_children(struct config_item *ite
 	return item ? container_of(to_config_group(item), struct simple_children, group) : NULL;
 }
 
-static struct config_item *simple_children_make_item(struct config_group *group, const char *name)
+static int simple_children_make_item(struct config_group *group, const char *name, struct config_item **new_item)
 {
 	struct simple_child *simple_child;
 
 	simple_child = kzalloc(sizeof(struct simple_child), GFP_KERNEL);
 	if (!simple_child)
-		return NULL;
+		return -ENOMEM;
 
 
 	config_item_init_type_name(&simple_child->item, name,
@@ -287,7 +287,8 @@ static struct config_item *simple_children_make_item(struct config_group *group,
 
 	simple_child->storeme = 0;
 
-	return &simple_child->item;
+	*new_item = &simple_child->item;
+	return 0;
 }
 
 static struct configfs_attribute simple_children_attr_description = {
@@ -359,20 +360,21 @@ static struct configfs_subsystem simple_children_subsys = {
  * children of its own.
  */
 
-static struct config_group *group_children_make_group(struct config_group *group, const char *name)
+static int group_children_make_group(struct config_group *group, const char *name, struct config_group **new_group)
 {
 	struct simple_children *simple_children;
 
 	simple_children = kzalloc(sizeof(struct simple_children),
 				  GFP_KERNEL);
 	if (!simple_children)
-		return NULL;
+		return -ENOMEM;
 
 
 	config_group_init_type_name(&simple_children->group, name,
 				    &simple_children_type);
 
-	return &simple_children->group;
+	*new_group = &simple_children->group;
+	return 0;
 }
 
 static struct configfs_attribute group_children_attr_description = {
diff --git a/Documentation/filesystems/ubifs.txt b/Documentation/filesystems/ubifs.txt
new file mode 100644
index 000000000000..540e9e7f59c5
--- /dev/null
+++ b/Documentation/filesystems/ubifs.txt
@@ -0,0 +1,164 @@
+Introduction
+=============
+
+UBIFS file-system stands for UBI File System. UBI stands for "Unsorted
+Block Images". UBIFS is a flash file system, which means it is designed
+to work with flash devices. It is important to understand, that UBIFS
+is completely different to any traditional file-system in Linux, like
+Ext2, XFS, JFS, etc. UBIFS represents a separate class of file-systems
+which work with MTD devices, not block devices. The other Linux
+file-system of this class is JFFS2.
+
+To make it more clear, here is a small comparison of MTD devices and
+block devices.
+
+1 MTD devices represent flash devices and they consist of eraseblocks of
+  rather large size, typically about 128KiB. Block devices consist of
+  small blocks, typically 512 bytes.
+2 MTD devices support 3 main operations - read from some offset within an
+  eraseblock, write to some offset within an eraseblock, and erase a whole
+  eraseblock. Block  devices support 2 main operations - read a whole
+  block and write a whole block.
+3 The whole eraseblock has to be erased before it becomes possible to
+  re-write its contents. Blocks may be just re-written.
+4 Eraseblocks become worn out after some number of erase cycles -
+  typically 100K-1G for SLC NAND and NOR flashes, and 1K-10K for MLC
+  NAND flashes. Blocks do not have the wear-out property.
+5 Eraseblocks may become bad (only on NAND flashes) and software should
+  deal with this. Blocks on hard drives typically do not become bad,
+  because hardware has mechanisms to substitute bad blocks, at least in
+  modern LBA disks.
+
+It should be quite obvious why UBIFS is very different to traditional
+file-systems.
+
+UBIFS works on top of UBI. UBI is a separate software layer which may be
+found in drivers/mtd/ubi. UBI is basically a volume management and
+wear-leveling layer. It provides so called UBI volumes which is a higher
+level abstraction than a MTD device. The programming model of UBI devices
+is very similar to MTD devices - they still consist of large eraseblocks,
+they have read/write/erase operations, but UBI devices are devoid of
+limitations like wear and bad blocks (items 4 and 5 in the above list).
+
+In a sense, UBIFS is a next generation of JFFS2 file-system, but it is
+very different and incompatible to JFFS2. The following are the main
+differences.
+
+* JFFS2 works on top of MTD devices, UBIFS depends on UBI and works on
+  top of UBI volumes.
+* JFFS2 does not have on-media index and has to build it while mounting,
+  which requires full media scan. UBIFS maintains the FS indexing
+  information on the flash media and does not require full media scan,
+  so it mounts many times faster than JFFS2.
+* JFFS2 is a write-through file-system, while UBIFS supports write-back,
+  which makes UBIFS much faster on writes.
+
+Similarly to JFFS2, UBIFS supports on-the-flight compression which makes
+it possible to fit quite a lot of data to the flash.
+
+Similarly to JFFS2, UBIFS is tolerant of unclean reboots and power-cuts.
+It does not need stuff like ckfs.ext2. UBIFS automatically replays its
+journal and recovers from crashes, ensuring that the on-flash data
+structures are consistent.
+
+UBIFS scales logarithmically (most of the data structures it uses are
+trees), so the mount time and memory consumption do not linearly depend
+on the flash size, like in case of JFFS2. This is because UBIFS
+maintains the FS index on the flash media. However, UBIFS depends on
+UBI, which scales linearly. So overall UBI/UBIFS stack scales linearly.
+Nevertheless, UBI/UBIFS scales considerably better than JFFS2.
+
+The authors of UBIFS believe, that it is possible to develop UBI2 which
+would scale logarithmically as well. UBI2 would support the same API as UBI,
+but it would be binary incompatible to UBI. So UBIFS would not need to be
+changed to use UBI2
+
+
+Mount options
+=============
+
+(*) == default.
+
+norm_unmount (*)	commit on unmount; the journal is committed
+			when the file-system is unmounted so that the
+			next mount does not have to replay the journal
+			and it becomes very fast;
+fast_unmount		do not commit on unmount; this option makes
+			unmount faster, but the next mount slower
+			because of the need to replay the journal.
+
+
+Quick usage instructions
+========================
+
+The UBI volume to mount is specified using "ubiX_Y" or "ubiX:NAME" syntax,
+where "X" is UBI device number, "Y" is UBI volume number, and "NAME" is
+UBI volume name.
+
+Mount volume 0 on UBI device 0 to /mnt/ubifs:
+$ mount -t ubifs ubi0_0 /mnt/ubifs
+
+Mount "rootfs" volume of UBI device 0 to /mnt/ubifs ("rootfs" is volume
+name):
+$ mount -t ubifs ubi0:rootfs /mnt/ubifs
+
+The following is an example of the kernel boot arguments to attach mtd0
+to UBI and mount volume "rootfs":
+ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs
+
+
+Module Parameters for Debugging
+===============================
+
+When UBIFS has been compiled with debugging enabled, there are 3 module
+parameters that are available to control aspects of testing and debugging.
+The parameters are unsigned integers where each bit controls an option.
+The parameters are:
+
+debug_msgs	Selects which debug messages to display, as follows:
+
+		Message Type				Flag value
+
+		General messages			1
+		Journal messages			2
+		Mount messages				4
+		Commit messages				8
+		LEB search messages			16
+		Budgeting messages			32
+		Garbage collection messages		64
+		Tree Node Cache (TNC) messages		128
+		LEB properties (lprops) messages	256
+		Input/output messages			512
+		Log messages				1024
+		Scan messages				2048
+		Recovery messages			4096
+
+debug_chks	Selects extra checks that UBIFS can do while running:
+
+		Check					Flag value
+
+		General checks				1
+		Check Tree Node Cache (TNC)		2
+		Check indexing tree size		4
+		Check orphan area			8
+		Check old indexing tree			16
+		Check LEB properties (lprops)		32
+		Check leaf nodes and inodes		64
+
+debug_tsts	Selects a mode of testing, as follows:
+
+		Test mode				Flag value
+
+		Force in-the-gaps method		2
+		Failure mode for recovery testing	4
+
+For example, set debug_msgs to 5 to display General messages and Mount
+messages.
+
+
+References
+==========
+
+UBIFS documentation and FAQ/HOWTO at the MTD web site:
+http://www.linux-mtd.infradead.org/doc/ubifs.html
+http://www.linux-mtd.infradead.org/faq/ubifs.html
diff --git a/Documentation/ioctl/hdio.txt b/Documentation/ioctl/hdio.txt
index c19efdeace2c..91a6ecbae0bb 100644
--- a/Documentation/ioctl/hdio.txt
+++ b/Documentation/ioctl/hdio.txt
@@ -508,12 +508,13 @@ HDIO_DRIVE_RESET		execute a device reset
 
 	error returns:
 	  EACCES	Access denied:  requires CAP_SYS_ADMIN
+	  ENXIO		No such device:	phy dead or ctl_addr == 0
+	  EIO		I/O error:	reset timed out or hardware error
 
 	notes:
 
-	  Abort any current command, prevent anything else from being
-	  queued, execute a reset on the device, and issue BLKRRPART
-	  ioctl on the block device.
+	  Execute a reset on the device as soon as the current IO
+	  operation has completed.
 
 	  Executes an ATAPI soft reset if applicable, otherwise
 	  executes an ATA soft reset on the controller.
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 312fe77764a4..09ad7450647b 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -147,10 +147,14 @@ and is between 256 and 4096 characters. It is defined in the file
 			default: 0
 
 	acpi_sleep=	[HW,ACPI] Sleep options
-			Format: { s3_bios, s3_mode, s3_beep }
+			Format: { s3_bios, s3_mode, s3_beep, old_ordering }
 			See Documentation/power/video.txt for s3_bios and s3_mode.
 			s3_beep is for debugging; it makes the PC's speaker beep
 			as soon as the kernel's real-mode entry point is called.
+			old_ordering causes the ACPI 1.0 ordering of the _PTS
+			control method, wrt putting devices into low power
+			states, to be enforced (the ACPI 2.0 ordering of _PTS is
+			used by default).
 
 	acpi_sci=	[HW,ACPI] ACPI System Control Interrupt trigger mode
 			Format: { level | edge | high | low }
@@ -818,7 +822,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			See Documentation/ide/ide.txt.
 
 	idle=		[X86]
-			Format: idle=poll or idle=mwait
+			Format: idle=poll or idle=mwait, idle=halt, idle=nomwait
 			Poll forces a polling idle loop that can slightly improves the performance
 			of waking up a idle CPU, but will use a lot of power and make the system
 			run hot. Not recommended.
@@ -826,6 +830,9 @@ and is between 256 and 4096 characters. It is defined in the file
 			to not use it because it doesn't save as much power as a normal idle
 			loop use the MONITOR/MWAIT idle loop anyways. Performance should be the same
 			as idle=poll.
+			idle=halt. Halt is forced to be used for CPU idle.
+			In such case C2/C3 won't be used again.
+			idle=nomwait. Disable mwait for CPU C-states
 
 	ide-pci-generic.all-generic-ide [HW] (E)IDE subsystem
 			Claim all unknown PCI IDE storage controllers.
@@ -1534,6 +1541,9 @@ and is between 256 and 4096 characters. It is defined in the file
 				Use with caution as certain devices share
 				address decoders between ROMs and other
 				resources.
+		norom		[X86-32,X86_64] Do not assign address space to
+				expansion ROMs that do not already have
+				BIOS assigned address ranges.
 		irqmask=0xMMMM	[X86-32] Set a bit mask of IRQs allowed to be
 				assigned automatically to PCI devices. You can
 				make the kernel exclude IRQs of your ISA cards
diff --git a/Documentation/laptops/acer-wmi.txt b/Documentation/laptops/acer-wmi.txt
index 79b7dbd22141..69b5dd4e5a59 100644
--- a/Documentation/laptops/acer-wmi.txt
+++ b/Documentation/laptops/acer-wmi.txt
@@ -174,8 +174,6 @@ The LED is exposed through the LED subsystem, and can be found in:
 The mail LED is autodetected, so if you don't have one, the LED device won't
 be registered.
 
-If you have a mail LED that is not green, please report this to me.
-
 Backlight
 *********