Merge tag 'tty-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial updates from Greg KH:
 "Here is the "big" tty and serial driver patches for 5.5-rc1.

  It's a bit later in the merge window than normal as I wanted to make
  sure some last-minute patches applied to it were all sane. They seem
  to be :)

  There's a lot of little stuff in here, for the tty core, and for lots
  of serial drivers:

   - reverts of uartlite serial driver patches that were wrong

   - msm-serial driver fixes

   - serial core updates and fixes

   - tty core fixes

   - serial driver dma mapping api changes

   - lots of other tiny fixes and updates for serial drivers

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (58 commits)
  Revert "serial/8250: Add support for NI-Serial PXI/PXIe+485 devices"
  vcs: prevent write access to vcsu devices
  tty: vt: keyboard: reject invalid keycodes
  tty: don't crash in tty_init_dev when missing tty_port
  serial: stm32: fix clearing interrupt error flags
  tty: Fix Kconfig indentation, continued
  serial: serial_core: Perform NULL checks for break_ctl ops
  tty: remove unused argument from tty_open_by_driver()
  tty: Fix Kconfig indentation
  {tty: serial, nand: onenand}: samsung: rename to fix build warning
  serial: ifx6x60: add missed pm_runtime_disable
  serial: pl011: Fix DMA ->flush_buffer()
  Revert "serial-uartlite: Move the uart register"
  Revert "serial-uartlite: Add get serial id if not provided"
  Revert "serial-uartlite: Do not use static struct uart_driver out of probe()"
  Revert "serial-uartlite: Add runtime support"
  Revert "serial-uartlite: Change logic how console_port is setup"
  Revert "serial-uartlite: Use allocated structure instead of static ones"
  tty: serial: msm_serial: Use dma_request_chan() directly for channel request
  tty: serial: tegra: Use dma_request_chan() directly for channel request
  ...

8 files changed, 21 insertions, 9 deletions

diff --git a/Documentation/ABI/stable/sysfs-driver-aspeed-vuart b/Documentation/ABI/stable/sysfs-driver-aspeed-vuart
index 8062953ce77b..950cafc9443a 100644
--- a/Documentation/ABI/stable/sysfs-driver-aspeed-vuart
+++ b/Documentation/ABI/stable/sysfs-driver-aspeed-vuart
@@ -6,10 +6,19 @@ Description:	Configures which IO port the host side of the UART
 Users:		OpenBMC.  Proposed changes should be mailed to
 		openbmc@lists.ozlabs.org
 
-What:		/sys/bus/platform/drivers/aspeed-vuart*/sirq
+What:		/sys/bus/platform/drivers/aspeed-vuart/*/sirq
 Date:		April 2017
 Contact:	Jeremy Kerr <jk@ozlabs.org>
 Description:	Configures which interrupt number the host side of
 		the UART will appear on the host <-> BMC LPC bus.
 Users:		OpenBMC.  Proposed changes should be mailed to
 		openbmc@lists.ozlabs.org
+
+What:		/sys/bus/platform/drivers/aspeed-vuart/*/sirq_polarity
+Date:		July 2019
+Contact:	Oskar Senft <osk@google.com>
+Description:	Configures the polarity of the serial interrupt to the
+		host via the BMC LPC bus.
+		Set to 0 for active-low or 1 for active-high.
+Users:		OpenBMC.  Proposed changes should be mailed to
+		openbmc@lists.ozlabs.org
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 4f34799e0576..5a92d89a1bd4 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -1097,7 +1097,7 @@
 			mapped with the correct attributes.
 
 		linflex,<addr>
-			Use early console provided by Freescale LinFlex UART
+			Use early console provided by Freescale LINFlexD UART
 			serial driver for NXP S32V234 SoCs. A valid base
 			address must be provided, and the serial port must
 			already be setup and configured.
diff --git a/Documentation/devicetree/bindings/serial/8250.txt b/Documentation/devicetree/bindings/serial/8250.txt
index 20d351f268ef..55700f20f6ee 100644
--- a/Documentation/devicetree/bindings/serial/8250.txt
+++ b/Documentation/devicetree/bindings/serial/8250.txt
@@ -56,6 +56,11 @@ Optional properties:
 - {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD
   line respectively. It will use specified GPIO instead of the peripheral
   function pin for the UART feature. If unsure, don't specify this property.
+- aspeed,sirq-polarity-sense: Only applicable to aspeed,ast2500-vuart.
+  phandle to aspeed,ast2500-scu compatible syscon alongside register offset
+  and bit number to identify how the SIRQ polarity should be configured.
+  One possible data source is the LPC/eSPI mode bit.
+  Example: aspeed,sirq-polarity-sense = <&syscon 0x70 25>
 
 Note:
 * fsl,ns16550:
diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt
index 3495eee81d53..f5f5ab0fd14e 100644
--- a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt
+++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt
@@ -21,8 +21,7 @@ Required properties:
 Optional properties:
 - dmas: A list of two dma specifiers, one for each entry in dma-names.
 - dma-names: should contain "tx" and "rx".
-- rs485-rts-delay, rs485-rts-active-low, rs485-rx-during-tx,
-  linux,rs485-enabled-at-boot-time: see rs485.txt
+- rs485-rts-active-low, linux,rs485-enabled-at-boot-time: see rs485.txt
 
 Note: Optional properties for DMA support. Write them both or both not.
 
diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
index b143d9a21b2d..a5edf4b70c7a 100644
--- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
+++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
@@ -54,8 +54,10 @@ Required properties:
     - "renesas,hscif-r8a7794" for R8A7794 (R-Car E2) HSCIF compatible UART.
     - "renesas,scif-r8a7795" for R8A7795 (R-Car H3) SCIF compatible UART.
     - "renesas,hscif-r8a7795" for R8A7795 (R-Car H3) HSCIF compatible UART.
-    - "renesas,scif-r8a7796" for R8A7796 (R-Car M3-W) SCIF compatible UART.
-    - "renesas,hscif-r8a7796" for R8A7796 (R-Car M3-W) HSCIF compatible UART.
+    - "renesas,scif-r8a7796" for R8A77960 (R-Car M3-W) SCIF compatible UART.
+    - "renesas,hscif-r8a7796" for R8A77960 (R-Car M3-W) HSCIF compatible UART.
+    - "renesas,scif-r8a77961" for R8A77961 (R-Car M3-W+) SCIF compatible UART.
+    - "renesas,hscif-r8a77961" for R8A77961 (R-Car M3-W+) HSCIF compatible UART.
     - "renesas,scif-r8a77965" for R8A77965 (R-Car M3-N) SCIF compatible UART.
     - "renesas,hscif-r8a77965" for R8A77965 (R-Car M3-N) HSCIF compatible UART.
     - "renesas,scif-r8a77970" for R8A77970 (R-Car V3M) SCIF compatible UART.
diff --git a/Documentation/process/magic-number.rst b/Documentation/process/magic-number.rst
index 547bbf28e615..eee9b44553b3 100644
--- a/Documentation/process/magic-number.rst
+++ b/Documentation/process/magic-number.rst
@@ -81,7 +81,6 @@ FF_MAGIC              0x4646           fc_info                  ``drivers/net/ip
 ISICOM_MAGIC          0x4d54           isi_port                 ``include/linux/isicom.h``
 PTY_MAGIC             0x5001                                    ``drivers/char/pty.c``
 PPP_MAGIC             0x5002           ppp                      ``include/linux/if_pppvar.h``
-SERIAL_MAGIC          0x5301           async_struct             ``include/linux/serial.h``
 SSTATE_MAGIC          0x5302           serial_state             ``include/linux/serial.h``
 SLIP_MAGIC            0x5302           slip                     ``drivers/net/slip.h``
 STRIP_MAGIC           0x5303           strip                    ``drivers/net/strip.c``
diff --git a/Documentation/translations/it_IT/process/magic-number.rst b/Documentation/translations/it_IT/process/magic-number.rst
index ed1121d0ba84..783e0de314a0 100644
--- a/Documentation/translations/it_IT/process/magic-number.rst
+++ b/Documentation/translations/it_IT/process/magic-number.rst
@@ -87,7 +87,6 @@ FF_MAGIC              0x4646           fc_info                  ``drivers/net/ip
 ISICOM_MAGIC          0x4d54           isi_port                 ``include/linux/isicom.h``
 PTY_MAGIC             0x5001                                    ``drivers/char/pty.c``
 PPP_MAGIC             0x5002           ppp                      ``include/linux/if_pppvar.h``
-SERIAL_MAGIC          0x5301           async_struct             ``include/linux/serial.h``
 SSTATE_MAGIC          0x5302           serial_state             ``include/linux/serial.h``
 SLIP_MAGIC            0x5302           slip                     ``drivers/net/slip.h``
 STRIP_MAGIC           0x5303           strip                    ``drivers/net/strip.c``
diff --git a/Documentation/translations/zh_CN/process/magic-number.rst b/Documentation/translations/zh_CN/process/magic-number.rst
index 15c592518194..e4c225996af0 100644
--- a/Documentation/translations/zh_CN/process/magic-number.rst
+++ b/Documentation/translations/zh_CN/process/magic-number.rst
@@ -70,7 +70,6 @@ FF_MAGIC              0x4646           fc_info                  ``drivers/net/ip
 ISICOM_MAGIC          0x4d54           isi_port                 ``include/linux/isicom.h``
 PTY_MAGIC             0x5001                                    ``drivers/char/pty.c``
 PPP_MAGIC             0x5002           ppp                      ``include/linux/if_pppvar.h``
-SERIAL_MAGIC          0x5301           async_struct             ``include/linux/serial.h``
 SSTATE_MAGIC          0x5302           serial_state             ``include/linux/serial.h``
 SLIP_MAGIC            0x5302           slip                     ``drivers/net/slip.h``
 STRIP_MAGIC           0x5303           strip                    ``drivers/net/strip.c``