Merge tag 'pinctrl-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "No core changes this time.

  New drivers:

   - Xlinix Versal pin control driver

   - Ocelot LAN969x pin control driver

   - T-Head TH1520 RISC-V SoC pin control driver

   - Qualcomm SM8750, IPQ5424, QCS8300, SAR2130P and QCS615 SoC pin
     control drivers

   - Qualcomm SM8750 LPASS (low power audio subsystem) pin control
     driver

   - Qualcomm PM8937 mixsig IC pin control support, GPIO and MPP
     (multi-purpose-pin)

   - Samsung Exynos8895 and Exynos9810 SoC pin control driver

   - SpacemiT K1 SoC pin control driver

   - Airhoa EN7581 IC pin control driver

  Improvements:

   - The Renesas subdriver now supports schmitt-trigger and open drain
     pin configurations if the hardware supports it

   - Support GPIOF and GPIOG banks in the Aspeed G6 SoC

   - Support the DSW community in the Intel Elkhartlake SoC"

* tag 'pinctrl-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (105 commits)
  pinctrl: airoha: Use unsigned long for bit search
  pinctrl: k210: Undef K210_PC_DEFAULT
  pinctrl: qcom: spmi: fix debugfs drive strength
  pinctrl: qcom: Add sm8750 pinctrl driver
  dt-bindings: pinctrl: qcom: Add sm8750 pinctrl
  pinctrl: cy8c95x0: remove unneeded goto labels
  pinctrl: cy8c95x0: embed iterator to the for-loop
  pinctrl: cy8c95x0: Use temporary variable for struct device
  pinctrl: cy8c95x0: use flexible sleeping in reset function
  pinctrl: cy8c95x0: switch to using devm_regulator_get_enable()
  pinctrl: cy8c95x0: Use 2-argument strscpy()
  dt-bindings: pinctrl: sx150xq: allow gpio line naming
  pinctrl: single: add marvell,pxa1908-padconf compatible
  dt-bindings: pinctrl: pinctrl-single: add marvell,pxa1908-padconf compatible
  dt-bindings: pinctrl: correct typo of description for cv1800
  pinctrl: qcom: spmi-mpp: Add PM8937 compatible
  dt-bindings: pinctrl: qcom,pmic-mpp: Document PM8937 compatible
  pinctrl: qcom-pmic-gpio: add support for PM8937
  dt-bindings: pinctrl: qcom,pmic-gpio: add PM8937
  pinctrl: Use of_property_present() for non-boolean properties
  ...

37 files changed, 2249 insertions, 498 deletions

diff --git a/Documentation/devicetree/bindings/arm/airoha,en7581-chip-scu.yaml b/Documentation/devicetree/bindings/arm/airoha,en7581-chip-scu.yaml
new file mode 100644
index 000000000000..67c449d804c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/airoha,en7581-chip-scu.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/airoha,en7581-chip-scu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha Chip SCU Controller for EN7581 SoC
+
+maintainers:
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+
+description:
+  The airoha chip-scu block provides a configuration interface for clock,
+  io-muxing and other functionalities used by multiple controllers (e.g. clock,
+  pinctrl, ecc) on EN7581 SoC.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - airoha,en7581-chip-scu
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      syscon@1fa20000 {
+        compatible = "airoha,en7581-chip-scu", "syscon";
+        reg = <0x0 0x1fa20000 0x0 0x388>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/airoha,en7581-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/airoha,en7581-gpio-sysctl.yaml
new file mode 100644
index 000000000000..4a81ed82ef34
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/airoha,en7581-gpio-sysctl.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/airoha,en7581-gpio-sysctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha EN7581 GPIO System Controller
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+
+description:
+  Airoha EN7581 SoC GPIO system controller which provided a register map
+  for controlling the GPIO, pins and PWM of the SoC.
+
+properties:
+  compatible:
+    items:
+      - const: airoha,en7581-gpio-sysctl
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  pinctrl:
+    type: object
+    $ref: /schemas/pinctrl/airoha,en7581-pinctrl.yaml
+    description:
+      Child node definition for EN7581 Pin controller
+
+  pwm:
+    type: object
+    $ref: /schemas/pwm/airoha,en7581-pwm.yaml
+    description:
+      Child node definition for EN7581 PWM controller
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    system-controller@1fbf0200 {
+      compatible = "airoha,en7581-gpio-sysctl", "syscon", "simple-mfd";
+      reg = <0x1fbf0200 0xc0>;
+
+      pinctrl {
+        compatible = "airoha,en7581-pinctrl";
+
+        interrupt-parent = <&gic>;
+        interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        mmc-pins {
+          mux {
+            function = "emmc";
+            groups = "emmc";
+          };
+        };
+
+        mdio-pins {
+          mux {
+            function = "mdio";
+            groups = "mdio";
+          };
+
+          conf {
+            pins = "gpio2";
+            output-enable;
+          };
+        };
+      };
+
+      pwm {
+        compatible = "airoha,en7581-pwm";
+
+        #pwm-cells = <3>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/airoha,en7581-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/airoha,en7581-pinctrl.yaml
new file mode 100644
index 000000000000..b2601d698dcd
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/airoha,en7581-pinctrl.yaml
@@ -0,0 +1,400 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/airoha,en7581-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha EN7581 Pin Controller
+
+maintainers:
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+
+description:
+  The Airoha's EN7581 Pin controller is used to control SoC pins.
+
+properties:
+  compatible:
+    const: airoha,en7581-pinctrl
+
+  interrupts:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - interrupts
+  - gpio-controller
+  - "#gpio-cells"
+  - interrupt-controller
+  - "#interrupt-cells"
+
+patternProperties:
+  '-pins$':
+    type: object
+
+    patternProperties:
+      '^mux(-|$)':
+        type: object
+
+        description:
+          pinmux configuration nodes.
+
+        $ref: /schemas/pinctrl/pinmux-node.yaml
+
+        properties:
+          function:
+            description:
+              A string containing the name of the function to mux to the group.
+            enum: [pon, tod_1pps, sipo, mdio, uart, i2c, jtag, pcm, spi,
+                   pcm_spi, i2s, emmc, pnand, pcie_reset, pwm, phy1_led0,
+                   phy2_led0, phy3_led0, phy4_led0, phy1_led1, phy2_led1,
+                   phy3_led1, phy4_led1]
+
+          groups:
+            description:
+              An array of strings. Each string contains the name of a group.
+
+        required:
+          - function
+          - groups
+
+        allOf:
+          - if:
+              properties:
+                function:
+                  const: pon
+            then:
+              properties:
+                groups:
+                  enum: [pon]
+          - if:
+              properties:
+                function:
+                  const: tod_1pps
+            then:
+              properties:
+                groups:
+                  enum: [pon_tod_1pps, gsw_tod_1pps]
+          - if:
+              properties:
+                function:
+                  const: sipo
+            then:
+              properties:
+                groups:
+                  enum: [sipo, sipo_rclk]
+          - if:
+              properties:
+                function:
+                  const: mdio
+            then:
+              properties:
+                groups:
+                  enum: [mdio]
+          - if:
+              properties:
+                function:
+                  const: uart
+            then:
+              properties:
+                groups:
+                  items:
+                    enum: [uart2, uart2_cts_rts, hsuart, hsuart_cts_rts,
+                           uart4, uart5]
+                  maxItems: 2
+          - if:
+              properties:
+                function:
+                  const: i2c
+            then:
+              properties:
+                groups:
+                  enum: [i2c1]
+          - if:
+              properties:
+                function:
+                  const: jtag
+            then:
+              properties:
+                groups:
+                  enum: [jtag_udi, jtag_dfd]
+          - if:
+              properties:
+                function:
+                  const: pcm
+            then:
+              properties:
+                groups:
+                  enum: [pcm1, pcm2]
+          - if:
+              properties:
+                function:
+                  const: spi
+            then:
+              properties:
+                groups:
+                  items:
+                    enum: [spi_quad, spi_cs1]
+                  maxItems: 2
+          - if:
+              properties:
+                function:
+                  const: pcm_spi
+            then:
+              properties:
+                groups:
+                  items:
+                    enum: [pcm_spi, pcm_spi_int, pcm_spi_rst, pcm_spi_cs1,
+                           pcm_spi_cs2_p156, pcm_spi_cs2_p128, pcm_spi_cs3,
+                           pcm_spi_cs4]
+                  maxItems: 7
+          - if:
+              properties:
+                function:
+                  const: i2c
+            then:
+              properties:
+                groups:
+                  enum: [i2s]
+          - if:
+              properties:
+                function:
+                  const: emmc
+            then:
+              properties:
+                groups:
+                  enum: [emmc]
+          - if:
+              properties:
+                function:
+                  const: pnand
+            then:
+              properties:
+                groups:
+                  enum: [pnand]
+          - if:
+              properties:
+                function:
+                  const: pcie_reset
+            then:
+              properties:
+                groups:
+                  enum: [pcie_reset0, pcie_reset1, pcie_reset2]
+          - if:
+              properties:
+                function:
+                  const: pwm
+            then:
+              properties:
+                groups:
+                  enum: [gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6,
+                         gpio7, gpio8, gpio9, gpio10, gpio11, gpio12, gpio13,
+                         gpio14, gpio15, gpio16, gpio17, gpio18, gpio19,
+                         gpio20, gpio21, gpio22, gpio23, gpio24, gpio25,
+                         gpio26, gpio27, gpio28, gpio29, gpio30, gpio31,
+                         gpio36, gpio37, gpio38, gpio39, gpio40, gpio41,
+                         gpio42, gpio43, gpio44, gpio45, gpio46, gpio47]
+          - if:
+              properties:
+                function:
+                  const: phy1_led0
+            then:
+              properties:
+                groups:
+                  enum: [gpio33, gpio34, gpio35, gpio42]
+          - if:
+              properties:
+                function:
+                  const: phy2_led0
+            then:
+              properties:
+                groups:
+                  enum: [gpio33, gpio34, gpio35, gpio42]
+          - if:
+              properties:
+                function:
+                  const: phy3_led0
+            then:
+              properties:
+                groups:
+                  enum: [gpio33, gpio34, gpio35, gpio42]
+          - if:
+              properties:
+                function:
+                  const: phy4_led0
+            then:
+              properties:
+                groups:
+                  enum: [gpio33, gpio34, gpio35, gpio42]
+          - if:
+              properties:
+                function:
+                  const: phy1_led1
+            then:
+              properties:
+                groups:
+                  enum: [gpio43, gpio44, gpio45, gpio46]
+          - if:
+              properties:
+                function:
+                  const: phy2_led1
+            then:
+              properties:
+                groups:
+                  enum: [gpio43, gpio44, gpio45, gpio46]
+          - if:
+              properties:
+                function:
+                  const: phy3_led1
+            then:
+              properties:
+                groups:
+                  enum: [gpio43, gpio44, gpio45, gpio46]
+          - if:
+              properties:
+                function:
+                  const: phy4_led1
+            then:
+              properties:
+                groups:
+                  enum: [gpio43, gpio44, gpio45, gpio46]
+
+        additionalProperties: false
+
+      '^conf(-|$)':
+        type: object
+
+        description:
+          pinconf configuration nodes.
+
+        $ref: /schemas/pinctrl/pincfg-node.yaml
+
+        properties:
+          pins:
+            description:
+              An array of strings. Each string contains the name of a pin.
+            items:
+              enum: [uart1_txd, uart1_rxd, i2c_scl, i2c_sda, spi_cs0, spi_clk,
+                     spi_mosi, spi_miso, gpio0, gpio1, gpio2, gpio3, gpio4,
+                     gpio5, gpio6, gpio7, gpio8, gpio9, gpio10, gpio11, gpio12,
+                     gpio13, gpio14, gpio15, gpio16, gpio17, gpio18, gpio19,
+                     gpio20, gpio21, gpio22, gpio23, gpio24, gpio25, gpio26,
+                     gpio27, gpio28, gpio29, gpio30, gpio31, gpio32, gpio33,
+                     gpio34, gpio35, gpio36, gpio37, gpio38, gpio39, gpio40,
+                     gpio41, gpio42, gpio43, gpio44, gpio45, gpio46,
+                     pcie_reset0, pcie_reset1, pcie_reset2]
+            minItems: 1
+            maxItems: 58
+
+          bias-disable: true
+
+          bias-pull-up: true
+
+          bias-pull-down: true
+
+          input-enable: true
+
+          output-enable: true
+
+          output-low: true
+
+          output-high: true
+
+          drive-open-drain: true
+
+          drive-strength:
+            description:
+              Selects the drive strength for MIO pins, in mA.
+            enum: [2, 4, 6, 8]
+
+        required:
+          - pins
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pinctrl {
+      compatible = "airoha,en7581-pinctrl";
+
+      interrupt-parent = <&gic>;
+      interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+
+      gpio-controller;
+      #gpio-cells = <2>;
+
+      interrupt-controller;
+      #interrupt-cells = <2>;
+
+      pcie1-rst-pins {
+        conf {
+          pins = "pcie_reset1";
+          drive-open-drain = <1>;
+        };
+      };
+
+      pwm-pins {
+        mux {
+          function = "pwm";
+          groups = "gpio18";
+        };
+      };
+
+      spi-pins {
+        mux {
+          function = "spi";
+          groups = "spi_quad", "spi_cs1";
+        };
+      };
+
+      uart2-pins {
+        mux {
+          function = "uart";
+          groups = "uart2", "uart2_cts_rts";
+        };
+      };
+
+      uar5-pins {
+        mux {
+          function = "uart";
+          groups = "uart5";
+        };
+      };
+
+      mmc-pins {
+        mux {
+          function = "emmc";
+          groups = "emmc";
+        };
+      };
+
+      mdio-pins {
+        mux {
+          function = "mdio";
+          groups = "mdio";
+        };
+
+        conf {
+          pins = "gpio2";
+          output-enable;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml
index 412bbcc276f3..c954761e0150 100644
--- a/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml
@@ -46,7 +46,7 @@ patternProperties:
           - const: gpio
 
       gpio-line-names:
-        minItems: 86 # AXG
+        minItems: 83 # Meson8b
         maxItems: 120 # Meson8
 
 unevaluatedProperties:
diff --git a/Documentation/devicetree/bindings/pinctrl/canaan,k230-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/canaan,k230-pinctrl.yaml
new file mode 100644
index 000000000000..0b462eb6dfe1
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/canaan,k230-pinctrl.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/canaan,k230-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Canaan Kendryte K230 Pin Controller
+
+maintainers:
+  - Ze Huang <18771902331@163.com>
+
+description:
+  The Canaan Kendryte K230 platform includes 64 IO pins, each capable of
+  multiplexing up to 5 different functions. Pin function configuration is
+  performed on a per-pin basis.
+
+properties:
+  compatible:
+    const: canaan,k230-pinctrl
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  '-pins$':
+    type: object
+    additionalProperties: false
+    description:
+      A pinctrl node should contain at least one subnode representing the
+      pinctrl groups available on the machine.
+
+    patternProperties:
+      '-cfg$':
+        type: object
+        allOf:
+          - $ref: /schemas/pinctrl/pincfg-node.yaml
+          - $ref: /schemas/pinctrl/pinmux-node.yaml
+        additionalProperties: false
+        description:
+          Each subnode will list the pins it needs, and how they should
+          be configured, with regard to muxer configuration, bias, input
+          enable/disable, input schmitt trigger, slew-rate enable/disable,
+          slew-rate, drive strength.
+
+        properties:
+          pinmux:
+            description:
+              The list of GPIOs and their mux settings that properties in
+              the node apply to. This should be set with the macro
+              'K230_PINMUX(pin, mode)'
+
+          bias-disable: true
+
+          bias-pull-up: true
+
+          bias-pull-down: true
+
+          drive-strength:
+            minimum: 0
+            maximum: 15
+
+          input-enable: true
+
+          output-enable: true
+
+          input-schmitt-enable: true
+
+          slew-rate:
+            description: |
+              slew rate control enable
+              0: disable
+              1: enable
+
+            enum: [0, 1]
+
+          power-source:
+            description: |
+              Specifies the power source voltage for the IO bank that the
+              pin belongs to. Each bank of IO pins operate at a specific,
+              fixed voltage levels. Incorrect voltage configuration can
+              damage the chip. The defined constants represent the
+              possible voltage configurations:
+
+              - K230_MSC_3V3 (value 0): 3.3V power supply
+              - K230_MSC_1V8 (value 1): 1.8V power supply
+
+              The following banks have the corresponding voltage
+              configurations:
+
+              - bank IO0 to IO1: Fixed at 1.8V
+              - bank IO2 to IO13: Fixed at 1.8V
+              - bank IO14 to IO25: Fixed at 1.8V
+              - bank IO26 to IO37: Fixed at 1.8V
+              - bank IO38 to IO49: Fixed at 1.8V
+              - bank IO50 to IO61: Fixed at 3.3V
+              - bank IO62 to IO63: Fixed at 1.8V
+
+            enum: [0, 1]
+
+        required:
+          - pinmux
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pinctrl@91105000 {
+        compatible = "canaan,k230-pinctrl";
+        reg = <0x91105000 0x100>;
+
+        uart2-pins {
+            uart2-pins-cfg {
+                pinmux = <0x503>, /* uart2 txd */
+                         <0x603>; /* uart2 rxd */
+                slew-rate = <0>;
+                drive-strength = <4>;
+                power-source = <1>;
+                input-enable;
+                output-enable;
+                bias-disable;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx35-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx35-pinctrl.txt
deleted file mode 100644
index c083dfd25db9..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx35-pinctrl.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-* Freescale IMX35 IOMUX Controller
-
-Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
-and usage.
-
-Required properties:
-- compatible: "fsl,imx35-iomuxc"
-- fsl,pins: two integers array, represents a group of pins mux and config
-  setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a
-  pin working on a specific function, CONFIG is the pad setting value like
-  pull-up for this pin. Please refer to imx35 datasheet for the valid pad
-  config settings.
-
-CONFIG bits definition:
-PAD_CTL_DRIVE_VOLAGAGE_18	(1 << 13)
-PAD_CTL_DRIVE_VOLAGAGE_33	(0 << 13)
-PAD_CTL_HYS			(1 << 8)
-PAD_CTL_PKE			(1 << 7)
-PAD_CTL_PUE			(1 << 6)
-PAD_CTL_PUS_100K_DOWN		(0 << 4)
-PAD_CTL_PUS_47K_UP		(1 << 4)
-PAD_CTL_PUS_100K_UP		(2 << 4)
-PAD_CTL_PUS_22K_UP		(3 << 4)
-PAD_CTL_ODE_CMOS		(0 << 3)
-PAD_CTL_ODE_OPENDRAIN		(1 << 3)
-PAD_CTL_DSE_NOMINAL		(0 << 1)
-PAD_CTL_DSE_HIGH		(1 << 1)
-PAD_CTL_DSE_MAX			(2 << 1)
-PAD_CTL_SRE_FAST		(1 << 0)
-PAD_CTL_SRE_SLOW		(0 << 0)
-
-Refer to imx35-pinfunc.h in device tree source folder for all available
-imx35 PIN_FUNC_ID.
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx35-pinctrl.yaml
index 906b264a9e3c..265c43ab76f4 100644
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx35-pinctrl.yaml
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/pinctrl/fsl,imx6ul-pinctrl.yaml#
+$id: http://devicetree.org/schemas/pinctrl/fsl,imx35-pinctrl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Freescale IMX6UL IOMUX Controller
+title: Freescale IMX35/IMX5x/IMX6 IOMUX Controller
 
 maintainers:
   - Dong Aisheng <aisheng.dong@nxp.com>
@@ -18,9 +18,21 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - fsl,imx6ul-iomuxc
-      - fsl,imx6ull-iomuxc-snvs
+    oneOf:
+      - enum:
+          - fsl,imx35-iomuxc
+          - fsl,imx51-iomuxc
+          - fsl,imx53-iomuxc
+          - fsl,imx6dl-iomuxc
+          - fsl,imx6q-iomuxc
+          - fsl,imx6sl-iomuxc
+          - fsl,imx6sll-iomuxc
+          - fsl,imx6sx-iomuxc
+          - fsl,imx6ul-iomuxc
+          - fsl,imx6ull-iomuxc-snvs
+      - items:
+          - const: fsl,imx50-iomuxc
+          - const: fsl,imx53-iomuxc
 
   reg:
     maxItems: 1
@@ -39,9 +51,9 @@ patternProperties:
           each entry consists of 6 integers and represents the mux and config
           setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
           mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
-          be found in <arch/arm/boot/dts/imx6ul-pinfunc.h>. The last integer
+          be found in <arch/arm/boot/dts/nxp/imx/imx*-pinfunc.h>. The last integer
           CONFIG is the pad setting value like pull-up on this pin. Please
-          refer to i.MX6UL Reference Manual for detailed CONFIG settings.
+          refer to matching i.MX Reference Manual for detailed CONFIG settings.
         $ref: /schemas/types.yaml#/definitions/uint32-matrix
         items:
           items:
@@ -56,7 +68,41 @@ patternProperties:
             - description: |
                 "input_val" indicates the select input value to be applied.
             - description: |
-                "pad_setting" indicates the pad configuration value to be applied:
+                "pad_setting" indicates the pad configuration value to be applied.
+                Common i.MX35
+                  PAD_CTL_DRIVE_VOLAGAGE_18       (1 << 13)
+                  PAD_CTL_DRIVE_VOLAGAGE_33       (0 << 13)
+                  PAD_CTL_HYS                     (1 << 8)
+                  PAD_CTL_PKE                     (1 << 7)
+                  PAD_CTL_PUE                     (1 << 6)
+                  PAD_CTL_PUS_100K_DOWN           (0 << 4)
+                  PAD_CTL_PUS_47K_UP              (1 << 4)
+                  PAD_CTL_PUS_100K_UP             (2 << 4)
+                  PAD_CTL_PUS_22K_UP              (3 << 4)
+                  PAD_CTL_ODE_CMOS                (0 << 3)
+                  PAD_CTL_ODE_OPENDRAIN           (1 << 3)
+                  PAD_CTL_DSE_NOMINAL             (0 << 1)
+                  PAD_CTL_DSE_HIGH                (1 << 1)
+                  PAD_CTL_DSE_MAX                 (2 << 1)
+                  PAD_CTL_SRE_FAST                (1 << 0)
+                  PAD_CTL_SRE_SLOW                (0 << 0)
+                Common i.MX50/i.MX51/i.MX53 bits
+                  PAD_CTL_HVE                     (1 << 13)
+                  PAD_CTL_HYS                     (1 << 8)
+                  PAD_CTL_PKE                     (1 << 7)
+                  PAD_CTL_PUE                     (1 << 6)
+                  PAD_CTL_PUS_100K_DOWN           (0 << 4)
+                  PAD_CTL_PUS_47K_UP              (1 << 4)
+                  PAD_CTL_PUS_100K_UP             (2 << 4)
+                  PAD_CTL_PUS_22K_UP              (3 << 4)
+                  PAD_CTL_ODE                     (1 << 3)
+                  PAD_CTL_DSE_LOW                 (0 << 1)
+                  PAD_CTL_DSE_MED                 (1 << 1)
+                  PAD_CTL_DSE_HIGH                (2 << 1)
+                  PAD_CTL_DSE_MAX                 (3 << 1)
+                  PAD_CTL_SRE_FAST                (1 << 0)
+                  PAD_CTL_SRE_SLOW                (0 << 0)
+                Common i.MX6 bits
                   PAD_CTL_HYS                     (1 << 16)
                   PAD_CTL_PUS_100K_DOWN           (0 << 14)
                   PAD_CTL_PUS_47K_UP              (1 << 14)
@@ -69,6 +115,11 @@ patternProperties:
                   PAD_CTL_SPEED_MED               (1 << 6)
                   PAD_CTL_SPEED_HIGH              (3 << 6)
                   PAD_CTL_DSE_DISABLE             (0 << 3)
+                  PAD_CTL_SRE_FAST                (1 << 0)
+                  PAD_CTL_SRE_SLOW                (0 << 0)
+                i.MX6SL/MX6SLL specific bits
+                  PAD_CTL_LVE                     (1 << 22) (MX6SL/SLL only)
+                i.MX6SLL/i.MX6SX/i.MX6UL/i.MX6ULL specific bits
                   PAD_CTL_DSE_260ohm              (1 << 3)
                   PAD_CTL_DSE_130ohm              (2 << 3)
                   PAD_CTL_DSE_87ohm               (3 << 3)
@@ -76,8 +127,14 @@ patternProperties:
                   PAD_CTL_DSE_52ohm               (5 << 3)
                   PAD_CTL_DSE_43ohm               (6 << 3)
                   PAD_CTL_DSE_37ohm               (7 << 3)
-                  PAD_CTL_SRE_FAST                (1 << 0)
-                  PAD_CTL_SRE_SLOW                (0 << 0)
+                i.MX6DL/i.MX6Q/i.MX6SL specific bits
+                  PAD_CTL_DSE_240ohm              (1 << 3)
+                  PAD_CTL_DSE_120ohm              (2 << 3)
+                  PAD_CTL_DSE_80ohm               (3 << 3)
+                  PAD_CTL_DSE_60ohm               (4 << 3)
+                  PAD_CTL_DSE_48ohm               (5 << 3)
+                  PAD_CTL_DSE_40ohm               (6 << 3)
+                  PAD_CTL_DSE_34ohm               (7 << 3)
 
     required:
       - fsl,pins
@@ -114,3 +171,14 @@ examples:
         >;
       };
     };
+  - |
+    iomuxc_mx6q: pinctrl@20e0000 {
+        compatible = "fsl,imx6q-iomuxc";
+        reg = <0x20e0000 0x4000>;
+
+        pinctrl_uart4: uart4grp {
+            fsl,pins =
+                <0x288 0x658 0x000 0x3 0x0	0x140>,
+                <0x28c 0x65c 0x938 0x3 0x3	0x140>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx50-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx50-pinctrl.txt
deleted file mode 100644
index 6da01d619d33..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx50-pinctrl.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-* Freescale IMX50 IOMUX Controller
-
-Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
-and usage.
-
-Required properties:
-- compatible: "fsl,imx50-iomuxc"
-- fsl,pins: two integers array, represents a group of pins mux and config
-  setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a
-  pin working on a specific function, CONFIG is the pad setting value like
-  pull-up for this pin. Please refer to imx50 datasheet for the valid pad
-  config settings.
-
-CONFIG bits definition:
-PAD_CTL_HVE			(1 << 13)
-PAD_CTL_HYS			(1 << 8)
-PAD_CTL_PKE			(1 << 7)
-PAD_CTL_PUE			(1 << 6)
-PAD_CTL_PUS_100K_DOWN		(0 << 4)
-PAD_CTL_PUS_47K_UP		(1 << 4)
-PAD_CTL_PUS_100K_UP		(2 << 4)
-PAD_CTL_PUS_22K_UP		(3 << 4)
-PAD_CTL_ODE			(1 << 3)
-PAD_CTL_DSE_LOW			(0 << 1)
-PAD_CTL_DSE_MED			(1 << 1)
-PAD_CTL_DSE_HIGH		(2 << 1)
-PAD_CTL_DSE_MAX			(3 << 1)
-PAD_CTL_SRE_FAST		(1 << 0)
-PAD_CTL_SRE_SLOW		(0 << 0)
-
-Refer to imx50-pinfunc.h in device tree source folder for all available
-imx50 PIN_FUNC_ID.
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx51-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx51-pinctrl.txt
deleted file mode 100644
index 4d1408fcc99c..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx51-pinctrl.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-* Freescale IMX51 IOMUX Controller
-
-Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
-and usage.
-
-Required properties:
-- compatible: "fsl,imx51-iomuxc"
-- fsl,pins: two integers array, represents a group of pins mux and config
-  setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a
-  pin working on a specific function, CONFIG is the pad setting value like
-  pull-up for this pin. Please refer to imx51 datasheet for the valid pad
-  config settings.
-
-CONFIG bits definition:
-PAD_CTL_HVE			(1 << 13)
-PAD_CTL_HYS			(1 << 8)
-PAD_CTL_PKE			(1 << 7)
-PAD_CTL_PUE			(1 << 6)
-PAD_CTL_PUS_100K_DOWN		(0 << 4)
-PAD_CTL_PUS_47K_UP		(1 << 4)
-PAD_CTL_PUS_100K_UP		(2 << 4)
-PAD_CTL_PUS_22K_UP		(3 << 4)
-PAD_CTL_ODE			(1 << 3)
-PAD_CTL_DSE_LOW			(0 << 1)
-PAD_CTL_DSE_MED			(1 << 1)
-PAD_CTL_DSE_HIGH		(2 << 1)
-PAD_CTL_DSE_MAX			(3 << 1)
-PAD_CTL_SRE_FAST		(1 << 0)
-PAD_CTL_SRE_SLOW		(0 << 0)
-
-Refer to imx51-pinfunc.h in device tree source folder for all available
-imx51 PIN_FUNC_ID.
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx53-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx53-pinctrl.txt
deleted file mode 100644
index 25dcb77cfaf7..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx53-pinctrl.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-* Freescale IMX53 IOMUX Controller
-
-Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
-and usage.
-
-Required properties:
-- compatible: "fsl,imx53-iomuxc"
-- fsl,pins: two integers array, represents a group of pins mux and config
-  setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a
-  pin working on a specific function, CONFIG is the pad setting value like
-  pull-up for this pin. Please refer to imx53 datasheet for the valid pad
-  config settings.
-
-CONFIG bits definition:
-PAD_CTL_HVE			(1 << 13)
-PAD_CTL_HYS			(1 << 8)
-PAD_CTL_PKE			(1 << 7)
-PAD_CTL_PUE			(1 << 6)
-PAD_CTL_PUS_100K_DOWN		(0 << 4)
-PAD_CTL_PUS_47K_UP		(1 << 4)
-PAD_CTL_PUS_100K_UP		(2 << 4)
-PAD_CTL_PUS_22K_UP		(3 << 4)
-PAD_CTL_ODE			(1 << 3)
-PAD_CTL_DSE_LOW			(0 << 1)
-PAD_CTL_DSE_MED			(1 << 1)
-PAD_CTL_DSE_HIGH		(2 << 1)
-PAD_CTL_DSE_MAX			(3 << 1)
-PAD_CTL_SRE_FAST		(1 << 0)
-PAD_CTL_SRE_SLOW		(0 << 0)
-
-Refer to imx53-pinfunc.h in device tree source folder for all available
-imx53 PIN_FUNC_ID.
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6dl-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6dl-pinctrl.txt
deleted file mode 100644
index 0ac5bee87505..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx6dl-pinctrl.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-* Freescale IMX6 DualLite/Solo IOMUX Controller
-
-Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
-and usage.
-
-Required properties:
-- compatible: "fsl,imx6dl-iomuxc"
-- fsl,pins: two integers array, represents a group of pins mux and config
-  setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a
-  pin working on a specific function, CONFIG is the pad setting value like
-  pull-up for this pin. Please refer to imx6dl datasheet for the valid pad
-  config settings.
-
-CONFIG bits definition:
-PAD_CTL_HYS                     (1 << 16)
-PAD_CTL_PUS_100K_DOWN           (0 << 14)
-PAD_CTL_PUS_47K_UP              (1 << 14)
-PAD_CTL_PUS_100K_UP             (2 << 14)
-PAD_CTL_PUS_22K_UP              (3 << 14)
-PAD_CTL_PUE                     (1 << 13)
-PAD_CTL_PKE                     (1 << 12)
-PAD_CTL_ODE                     (1 << 11)
-PAD_CTL_SPEED_LOW               (1 << 6)
-PAD_CTL_SPEED_MED               (2 << 6)
-PAD_CTL_SPEED_HIGH              (3 << 6)
-PAD_CTL_DSE_DISABLE             (0 << 3)
-PAD_CTL_DSE_240ohm              (1 << 3)
-PAD_CTL_DSE_120ohm              (2 << 3)
-PAD_CTL_DSE_80ohm               (3 << 3)
-PAD_CTL_DSE_60ohm               (4 << 3)
-PAD_CTL_DSE_48ohm               (5 << 3)
-PAD_CTL_DSE_40ohm               (6 << 3)
-PAD_CTL_DSE_34ohm               (7 << 3)
-PAD_CTL_SRE_FAST                (1 << 0)
-PAD_CTL_SRE_SLOW                (0 << 0)
-
-Refer to imx6dl-pinfunc.h in device tree source folder for all available
-imx6dl PIN_FUNC_ID.
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6q-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6q-pinctrl.txt
deleted file mode 100644
index 546610cf2ae7..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx6q-pinctrl.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-* Freescale IMX6Q IOMUX Controller
-
-Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
-and usage.
-
-Required properties:
-- compatible: "fsl,imx6q-iomuxc"
-- fsl,pins: two integers array, represents a group of pins mux and config
-  setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a
-  pin working on a specific function, CONFIG is the pad setting value like
-  pull-up for this pin. Please refer to imx6q datasheet for the valid pad
-  config settings.
-
-CONFIG bits definition:
-PAD_CTL_HYS                     (1 << 16)
-PAD_CTL_PUS_100K_DOWN           (0 << 14)
-PAD_CTL_PUS_47K_UP              (1 << 14)
-PAD_CTL_PUS_100K_UP             (2 << 14)
-PAD_CTL_PUS_22K_UP              (3 << 14)
-PAD_CTL_PUE                     (1 << 13)
-PAD_CTL_PKE                     (1 << 12)
-PAD_CTL_ODE                     (1 << 11)
-PAD_CTL_SPEED_LOW               (1 << 6)
-PAD_CTL_SPEED_MED               (2 << 6)
-PAD_CTL_SPEED_HIGH              (3 << 6)
-PAD_CTL_DSE_DISABLE             (0 << 3)
-PAD_CTL_DSE_240ohm              (1 << 3)
-PAD_CTL_DSE_120ohm              (2 << 3)
-PAD_CTL_DSE_80ohm               (3 << 3)
-PAD_CTL_DSE_60ohm               (4 << 3)
-PAD_CTL_DSE_48ohm               (5 << 3)
-PAD_CTL_DSE_40ohm               (6 << 3)
-PAD_CTL_DSE_34ohm               (7 << 3)
-PAD_CTL_SRE_FAST                (1 << 0)
-PAD_CTL_SRE_SLOW                (0 << 0)
-
-Refer to imx6q-pinfunc.h in device tree source folder for all available
-imx6q PIN_FUNC_ID.
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6sl-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sl-pinctrl.txt
deleted file mode 100644
index e5f6d1f065a4..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx6sl-pinctrl.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-* Freescale IMX6 SoloLite IOMUX Controller
-
-Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
-and usage.
-
-Required properties:
-- compatible: "fsl,imx6sl-iomuxc"
-- fsl,pins: two integers array, represents a group of pins mux and config
-  setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a
-  pin working on a specific function, CONFIG is the pad setting value like
-  pull-up for this pin. Please refer to imx6sl datasheet for the valid pad
-  config settings.
-
-CONFIG bits definition:
-PAD_CTL_LVE                     (1 << 22)
-PAD_CTL_HYS                     (1 << 16)
-PAD_CTL_PUS_100K_DOWN           (0 << 14)
-PAD_CTL_PUS_47K_UP              (1 << 14)
-PAD_CTL_PUS_100K_UP             (2 << 14)
-PAD_CTL_PUS_22K_UP              (3 << 14)
-PAD_CTL_PUE                     (1 << 13)
-PAD_CTL_PKE                     (1 << 12)
-PAD_CTL_ODE                     (1 << 11)
-PAD_CTL_SPEED_LOW               (1 << 6)
-PAD_CTL_SPEED_MED               (2 << 6)
-PAD_CTL_SPEED_HIGH              (3 << 6)
-PAD_CTL_DSE_DISABLE             (0 << 3)
-PAD_CTL_DSE_240ohm              (1 << 3)
-PAD_CTL_DSE_120ohm              (2 << 3)
-PAD_CTL_DSE_80ohm               (3 << 3)
-PAD_CTL_DSE_60ohm               (4 << 3)
-PAD_CTL_DSE_48ohm               (5 << 3)
-PAD_CTL_DSE_40ohm               (6 << 3)
-PAD_CTL_DSE_34ohm               (7 << 3)
-PAD_CTL_SRE_FAST                (1 << 0)
-PAD_CTL_SRE_SLOW                (0 << 0)
-
-Refer to imx6sl-pinfunc.h in device tree source folder for all available
-imx6sl PIN_FUNC_ID.
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt
deleted file mode 100644
index 175e8939a301..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-* Freescale i.MX6 SLL IOMUX Controller
-
-Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
-and usage.
-
-Required properties:
-- compatible: "fsl,imx6sll-iomuxc"
-- fsl,pins: each entry consists of 6 integers and represents the mux and config
-  setting for one pin.  The first 5 integers <mux_reg conf_reg input_reg mux_val
-  input_val> are specified using a PIN_FUNC_ID macro, which can be found in
-  imx6sll-pinfunc.h under device tree source folder.  The last integer CONFIG is
-  the pad setting value like pull-up on this pin.  Please refer to i.MX6SLL
-  Reference Manual for detailed CONFIG settings.
-
-CONFIG bits definition:
-PAD_CTL_LVE			(1 << 22)
-PAD_CTL_HYS                     (1 << 16)
-PAD_CTL_PUS_100K_DOWN           (0 << 14)
-PAD_CTL_PUS_47K_UP              (1 << 14)
-PAD_CTL_PUS_100K_UP             (2 << 14)
-PAD_CTL_PUS_22K_UP              (3 << 14)
-PAD_CTL_PUE                     (1 << 13)
-PAD_CTL_PKE                     (1 << 12)
-PAD_CTL_ODE                     (1 << 11)
-PAD_CTL_SPEED_LOW               (0 << 6)
-PAD_CTL_SPEED_MED               (1 << 6)
-PAD_CTL_SPEED_HIGH              (3 << 6)
-PAD_CTL_DSE_DISABLE             (0 << 3)
-PAD_CTL_DSE_260ohm              (1 << 3)
-PAD_CTL_DSE_130ohm              (2 << 3)
-PAD_CTL_DSE_87ohm               (3 << 3)
-PAD_CTL_DSE_65ohm               (4 << 3)
-PAD_CTL_DSE_52ohm               (5 << 3)
-PAD_CTL_DSE_43ohm               (6 << 3)
-PAD_CTL_DSE_37ohm               (7 << 3)
-PAD_CTL_SRE_FAST                (1 << 0)
-PAD_CTL_SRE_SLOW                (0 << 0)
-
-Refer to imx6sll-pinfunc.h in device tree source folder for all available
-imx6sll PIN_FUNC_ID.
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6sx-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sx-pinctrl.txt
deleted file mode 100644
index b1b595220f1b..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx6sx-pinctrl.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-* Freescale i.MX6 SoloX IOMUX Controller
-
-Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
-and usage.
-
-Required properties:
-- compatible: "fsl,imx6sx-iomuxc"
-- fsl,pins: each entry consists of 6 integers and represents the mux and config
-  setting for one pin.  The first 5 integers <mux_reg conf_reg input_reg mux_val
-  input_val> are specified using a PIN_FUNC_ID macro, which can be found in
-  imx6sx-pinfunc.h under device tree source folder.  The last integer CONFIG is
-  the pad setting value like pull-up on this pin.  Please refer to i.MX6 SoloX
-  Reference Manual for detailed CONFIG settings.
-
-CONFIG bits definition:
-PAD_CTL_HYS                     (1 << 16)
-PAD_CTL_PUS_100K_DOWN           (0 << 14)
-PAD_CTL_PUS_47K_UP              (1 << 14)
-PAD_CTL_PUS_100K_UP             (2 << 14)
-PAD_CTL_PUS_22K_UP              (3 << 14)
-PAD_CTL_PUE                     (1 << 13)
-PAD_CTL_PKE                     (1 << 12)
-PAD_CTL_ODE                     (1 << 11)
-PAD_CTL_SPEED_LOW               (0 << 6)
-PAD_CTL_SPEED_MED               (1 << 6)
-PAD_CTL_SPEED_HIGH              (3 << 6)
-PAD_CTL_DSE_DISABLE             (0 << 3)
-PAD_CTL_DSE_260ohm              (1 << 3)
-PAD_CTL_DSE_130ohm              (2 << 3)
-PAD_CTL_DSE_87ohm               (3 << 3)
-PAD_CTL_DSE_65ohm               (4 << 3)
-PAD_CTL_DSE_52ohm               (5 << 3)
-PAD_CTL_DSE_43ohm               (6 << 3)
-PAD_CTL_DSE_37ohm               (7 << 3)
-PAD_CTL_SRE_FAST                (1 << 0)
-PAD_CTL_SRE_SLOW                (0 << 0)
diff --git a/Documentation/devicetree/bindings/pinctrl/microchip,mcp23s08.yaml b/Documentation/devicetree/bindings/pinctrl/microchip,mcp23s08.yaml
new file mode 100644
index 000000000000..e07f4723de17
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/microchip,mcp23s08.yaml
@@ -0,0 +1,161 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/microchip,mcp23s08.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip I/O expander with serial interface (I2C/SPI)
+
+maintainers:
+  - Himanshu Bhavani <himanshu.bhavani@siliconsignals.io>
+
+description:
+  Microchip MCP23008, MCP23017, MCP23S08, MCP23S17, MCP23S18 GPIO expander
+  chips.These chips provide 8 or 16 GPIO pins with either I2C or SPI interface.
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - microchip,mcp23s08
+      - microchip,mcp23s17
+      - microchip,mcp23s18
+      - microchip,mcp23008
+      - microchip,mcp23017
+      - microchip,mcp23018
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    description: GPIO specifier for active-low reset pin.
+    maxItems: 1
+
+  microchip,spi-present-mask:
+    description:
+      Multiple SPI chips can share the same SPI chipselect. Set a bit in
+      bit0-7 in this mask to 1 if there is a chip connected with the
+      corresponding spi address set. For example if you have a chip with
+      address 3 connected, you have to set bit3 to 1, which is 0x08. mcp23s08
+      chip variant only supports bits 0-3. It is not possible to mix mcp23s08
+      and mcp23s17 on the same chipselect. Set at least one bit to 1 for SPI
+      chips.
+    $ref: /schemas/types.yaml#/definitions/uint8
+
+  microchip,irq-mirror:
+    type: boolean
+    description:
+      Sets the mirror flag in the IOCON register. Devices with two interrupt
+      outputs (these are the devices ending with 17 and those that have 16 IOs)
+      have two IO banks IO 0-7 form bank 1 and IO 8-15 are bank 2. These chips
+      have two different interrupt outputs One for bank 1 and another for
+      bank 2. If irq-mirror is set, both interrupts are generated regardless of
+      the bank that an input change occurred on. If it is not set,the interrupt
+      are only generated for the bank they belong to.
+
+  microchip,irq-active-high:
+    type: boolean
+    description:
+      Sets the INTPOL flag in the IOCON register.This configures the IRQ output
+      polarity as active high.
+
+  drive-open-drain:
+    type: boolean
+    description:
+      Sets the ODR flag in the IOCON register. This configures the IRQ output as
+      open drain active low.
+
+  pinmux:
+    type: object
+    properties:
+      pins:
+        description:
+          The list of GPIO pins controlled by this node. Each pin name
+          corresponds to a physical pin on the GPIO expander.
+        items:
+          pattern: '^gpio([0-9]|[1][0-5])$'
+        maxItems: 16
+
+      bias-pull-up:
+        type: boolean
+        description:
+          Configures pull-up resistors for the GPIO pins. Absence of this
+          property will leave the configuration in its default state.
+
+    required:
+      - pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        gpio@21 {
+            compatible = "microchip,mcp23017";
+            reg = <0x21>;
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            interrupt-parent = <&gpio1>;
+            interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+
+            microchip,irq-mirror;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pinctrl_i2c_gpio0>, <&gpiopullups>;
+            reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+
+            gpiopullups: pinmux {
+                pins = "gpio0", "gpio1", "gpio2", "gpio3",
+                       "gpio4", "gpio5", "gpio6", "gpio7",
+                       "gpio8", "gpio9", "gpio10", "gpio11",
+                       "gpio12", "gpio13", "gpio14", "gpio15";
+                bias-pull-up;
+            };
+        };
+    };
+
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        gpio@0 {
+            compatible = "microchip,mcp23s17";
+            reg = <0>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            spi-max-frequency = <1000000>;
+            microchip,spi-present-mask = /bits/ 8 <0x01>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml
index dbb3e1bd58c1..31bc30a81752 100644
--- a/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml
@@ -12,14 +12,24 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - microchip,lan966x-pinctrl
-      - microchip,sparx5-pinctrl
-      - mscc,jaguar2-pinctrl
-      - mscc,luton-pinctrl
-      - mscc,ocelot-pinctrl
-      - mscc,serval-pinctrl
-      - mscc,servalt-pinctrl
+    oneOf:
+      - enum:
+          - microchip,lan966x-pinctrl
+          - microchip,lan9691-pinctrl
+          - microchip,sparx5-pinctrl
+          - mscc,jaguar2-pinctrl
+          - mscc,luton-pinctrl
+          - mscc,ocelot-pinctrl
+          - mscc,serval-pinctrl
+          - mscc,servalt-pinctrl
+      - items:
+          - enum:
+              - microchip,lan9698-pinctrl
+              - microchip,lan9696-pinctrl
+              - microchip,lan9694-pinctrl
+              - microchip,lan9693-pinctrl
+              - microchip,lan9692-pinctrl
+          - const: microchip,lan9691-pinctrl
 
   reg:
     items:
@@ -85,6 +95,7 @@ allOf:
           contains:
             enum:
               - microchip,lan966x-pinctrl
+              - microchip,lan9691-pinctrl
               - microchip,sparx5-pinctrl
     then:
       properties:
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt
deleted file mode 100644
index 2fa5edac7a35..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt
+++ /dev/null
@@ -1,148 +0,0 @@
-Microchip MCP2308/MCP23S08/MCP23017/MCP23S17 driver for
-8-/16-bit I/O expander with serial interface (I2C/SPI)
-
-Required properties:
-- compatible : Should be
-    - "mcp,mcp23s08" (DEPRECATED) for  8 GPIO SPI version
-    - "mcp,mcp23s17" (DEPRECATED) for 16 GPIO SPI version
-    - "mcp,mcp23008" (DEPRECATED) for  8 GPIO I2C version or
-    - "mcp,mcp23017" (DEPRECATED) for 16 GPIO I2C version of the chip
-
-    - "microchip,mcp23s08" for  8 GPIO SPI version
-    - "microchip,mcp23s17" for 16 GPIO SPI version
-    - "microchip,mcp23s18" for 16 GPIO SPI version
-    - "microchip,mcp23008" for  8 GPIO I2C version or
-    - "microchip,mcp23017" for 16 GPIO I2C version of the chip
-    - "microchip,mcp23018" for 16 GPIO I2C version
-    NOTE: Do not use the old mcp prefix any more. It is deprecated and will be
-    removed.
-- #gpio-cells : Should be two.
-  - first cell is the pin number
-  - second cell is used to specify flags as described in
-    'Documentation/devicetree/bindings/gpio/gpio.txt'. Allowed values defined by
-    'include/dt-bindings/gpio/gpio.h' (e.g. GPIO_ACTIVE_LOW).
-- gpio-controller : Marks the device node as a GPIO controller.
-- reg : For an address on its bus. I2C uses this a the I2C address of the chip.
-        SPI uses this to specify the chipselect line which the chip is
-        connected to. The driver and the SPI variant of the chip support
-        multiple chips on the same chipselect. Have a look at
-        microchip,spi-present-mask below.
-
-Required device specific properties (only for SPI chips):
-- mcp,spi-present-mask (DEPRECATED)
-- microchip,spi-present-mask : This is a present flag, that makes only sense for SPI
-        chips - as the name suggests. Multiple SPI chips can share the same
-        SPI chipselect. Set a bit in bit0-7 in this mask to 1 if there is a
-        chip connected with the corresponding spi address set. For example if
-        you have a chip with address 3 connected, you have to set bit3 to 1,
-        which is 0x08. mcp23s08 chip variant only supports bits 0-3. It is not
-        possible to mix mcp23s08 and mcp23s17 on the same chipselect. Set at
-        least one bit to 1 for SPI chips.
-    NOTE: Do not use the old mcp prefix any more. It is deprecated and will be
-    removed.
-- spi-max-frequency = The maximum frequency this chip is able to handle
-
-Optional properties:
-- #interrupt-cells : Should be two.
-  - first cell is the pin number
-  - second cell is used to specify flags.
-- interrupt-controller: Marks the device node as a interrupt controller.
-- drive-open-drain: Sets the ODR flag in the IOCON register. This configures
-        the IRQ output as open drain active low.
-- reset-gpios: Corresponds to the active-low RESET# pin for the chip
-
-Optional device specific properties:
-- microchip,irq-mirror: Sets the mirror flag in the IOCON register. Devices
-        with two interrupt outputs (these are the devices ending with 17 and
-        those that have 16 IOs) have two IO banks: IO 0-7 form bank 1 and
-        IO 8-15 are bank 2. These chips have two different interrupt outputs:
-        One for bank 1 and another for bank 2. If irq-mirror is set, both
-        interrupts are generated regardless of the bank that an input change
-        occurred on. If it is not set, the interrupt are only generated for the
-        bank they belong to.
-        On devices with only one interrupt output this property is useless.
-- microchip,irq-active-high: Sets the INTPOL flag in the IOCON register. This
-        configures the IRQ output polarity as active high.
-
-Example I2C (with interrupt):
-gpiom1: gpio@20 {
-        compatible = "microchip,mcp23017";
-        gpio-controller;
-        #gpio-cells = <2>;
-        reg = <0x20>;
-
-        interrupt-parent = <&gpio1>;
-        interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
-        interrupt-controller;
-        #interrupt-cells=<2>;
-        microchip,irq-mirror;
-};
-
-Example SPI:
-gpiom1: gpio@0 {
-        compatible = "microchip,mcp23s17";
-        gpio-controller;
-        #gpio-cells = <2>;
-        microchip,spi-present-mask = <0x01>;
-        reg = <0>;
-        spi-max-frequency = <1000000>;
-};
-
-Pull-up configuration
-=====================
-
-If pins are used as output, they can also be configured with pull-ups. This is
-done with pinctrl.
-
-Please refer file <devicetree/bindings/pinctrl/pinctrl-bindings.txt>
-for details of the common pinctrl bindings used by client devices,
-including the meaning of the phrase "pin configuration node".
-
-Optional Pinmux properties:
---------------------------
-Following properties are required if default setting of pins are required
-at boot.
-- pinctrl-names: A pinctrl state named per <pinctrl-bindings.txt>.
-- pinctrl[0...n]: Properties to contain the phandle for pinctrl states per
-		<pinctrl-bindings.txt>.
-
-The pin configurations are defined as child of the pinctrl states node. Each
-sub-node have following properties:
-
-Required properties:
-------------------
-- pins: List of pins. Valid values of pins properties are:
-		      gpio0 ... gpio7 for the devices with 8 GPIO pins and
-		      gpio0 ... gpio15 for the devices with 16 GPIO pins.
-
-Optional properties:
--------------------
-The following optional property is defined in the pinmux DT binding document
-<pinctrl-bindings.txt>. Absence of this property will leave the configuration
-in its default state.
-	bias-pull-up
-
-Example with pinctrl to pull-up output pins:
-gpio21: gpio@21 {
-	compatible = "microchip,mcp23017";
-	gpio-controller;
-	#gpio-cells = <0x2>;
-	reg = <0x21>;
-	interrupt-parent = <&socgpio>;
-	interrupts = <0x17 0x8>;
-	interrupt-names = "mcp23017@21 irq";
-	interrupt-controller;
-	#interrupt-cells = <0x2>;
-	microchip,irq-mirror;
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2cgpio0irq>, <&gpio21pullups>;
-	reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
-
-	gpio21pullups: pinmux {
-		pins =	"gpio0", "gpio1", "gpio2", "gpio3",
-			"gpio4", "gpio5", "gpio6", "gpio7",
-			"gpio8", "gpio9", "gpio10", "gpio11",
-			"gpio12", "gpio13", "gpio14", "gpio15";
-		bias-pull-up;
-	};
-};
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml
index e02595316c9f..f83dbf32ad18 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml
@@ -33,6 +33,10 @@ properties:
               - ti,omap5-padconf
               - ti,j7200-padconf
           - const: pinctrl-single
+      - items:
+          - enum:
+              - marvell,pxa1908-padconf
+          - const: pinconf-single
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5424-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5424-tlmm.yaml
new file mode 100644
index 000000000000..5e64a232fc7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5424-tlmm.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,ipq5424-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm IPQ5424 TLMM pin controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm IPQ5424 SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,ipq5424-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 25
+
+  gpio-line-names:
+    maxItems: 50
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-ipq5424-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-ipq5424-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-ipq5424-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          pattern: "^gpio([0-9]|[1-4][0-9])$"
+        minItems: 1
+        maxItems: 50
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ atest_char, atest_char0, atest_char1, atest_char2, atest_char3,
+                atest_tic, audio_pri, audio_pri0, audio_pri1, audio_sec,
+                audio_sec0, audio_sec1, core_voltage, cri_trng0, cri_trng1,
+                cri_trng2, cri_trng3, cxc_clk, cxc_data, dbg_out, gcc_plltest,
+                gcc_tlmm, gpio, i2c0_scl, i2c0_sda, i2c1_scl, i2c1_sda, i2c11,
+                mac0, mac1, mdc_mst, mdc_slv, mdio_mst, mdio_slv, pcie0_clk,
+                pcie0_wake, pcie1_clk, pcie1_wake, pcie2_clk, pcie2_wake,
+                pcie3_clk, pcie3_wake, pll_test, prng_rosc0, prng_rosc1,
+                prng_rosc2, prng_rosc3, PTA0_0, PTA0_1, PTA0_2, PTA10, PTA11,
+                pwm0, pwm1, pwm2, qdss_cti_trig_in_a0, qdss_cti_trig_out_a0,
+                qdss_cti_trig_in_a1, qdss_cti_trig_out_a1, qdss_cti_trig_in_b0,
+                qdss_cti_trig_out_b0, qdss_cti_trig_in_b1, qdss_cti_trig_out_b1,
+                qdss_traceclk_a, qdss_tracectl_a, qdss_tracedata_a, qspi_clk,
+                qspi_cs, qspi_data, resout, rx0, rx1, rx2, sdc_clk, sdc_cmd,
+                sdc_data, spi0, spi1, spi10, spi11, tsens_max, uart0, uart1,
+                wci_txd, wci_rxd, wsi_clk, wsi_data ]
+
+    required:
+      - pins
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tlmm: pinctrl@1000000 {
+        compatible = "qcom,ipq5424-tlmm";
+        reg = <0x01000000 0x300000>;
+        gpio-controller;
+        #gpio-cells = <0x2>;
+        gpio-ranges = <&tlmm 0 0 50>;
+        interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <0x2>;
+
+        uart1_pins: uart1-state {
+            pins = "gpio43", "gpio44";
+            function = "uart1";
+            drive-strength = <8>;
+            bias-pull-up;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
index c1b799167d81..055cea5452eb 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
@@ -48,6 +48,7 @@ properties:
           - qcom,pm8916-gpio
           - qcom,pm8917-gpio
           - qcom,pm8921-gpio
+          - qcom,pm8937-gpio
           - qcom,pm8941-gpio
           - qcom,pm8950-gpio
           - qcom,pm8953-gpio
@@ -184,6 +185,7 @@ allOf:
               - qcom,pm8226-gpio
               - qcom,pm8350b-gpio
               - qcom,pm8550ve-gpio
+              - qcom,pm8937-gpio
               - qcom,pm8950-gpio
               - qcom,pm8953-gpio
               - qcom,pmi632-gpio
@@ -468,6 +470,7 @@ $defs:
                  - gpio1-gpio6 for pm8550vs
                  - gpio1-gpio38 for pm8917
                  - gpio1-gpio44 for pm8921
+                 - gpio1-gpio8 for pm8937 (hole on gpio3, gpio4 and gpio6)
                  - gpio1-gpio36 for pm8941
                  - gpio1-gpio8 for pm8950 (hole on gpio3)
                  - gpio1-gpio8 for pm8953 (hole on gpio3 and gpio6)
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
index 43146709e204..9364ae05f3e6 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
@@ -22,6 +22,7 @@ properties:
               - qcom,pm8226-mpp
               - qcom,pm8841-mpp
               - qcom,pm8916-mpp
+              - qcom,pm8937-mpp
               - qcom,pm8941-mpp
               - qcom,pm8950-mpp
               - qcom,pmi8950-mpp
@@ -92,6 +93,7 @@ $defs:
           this subnode.  Valid pins are
                  - mpp1-mpp4 for pm8841
                  - mpp1-mpp4 for pm8916
+                 - mpp1-mpp4 for pm8937
                  - mpp1-mpp8 for pm8941
                  - mpp1-mpp4 for pm8950
                  - mpp1-mpp4 for pmi8950
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcs615-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qcs615-tlmm.yaml
new file mode 100644
index 000000000000..1ce4b5df584a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcs615-tlmm.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,qcs615-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. QCS615 TLMM block
+
+maintainers:
+  - Lijuan Gao <quic_lijuang@quicinc.com>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm QCS615 SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,qcs615-tlmm
+
+  reg:
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: east
+      - const: west
+      - const: south
+
+  interrupts:
+    maxItems: 1
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 62
+
+  gpio-line-names:
+    maxItems: 123
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-qcs615-tlmm-state"
+      - type: object
+        patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-qcs615-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-qcs615-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-9]|12[0-2])$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk,
+                      sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ gpio, adsp_ext, agera_pll, aoss_cti, atest_char, atest_tsens,
+                atest_usb, cam_mclk, cci_async, cci_i2c, cci_timer, copy_gp,
+                copy_phase, cri_trng, dbg_out_clk, ddr_bist, ddr_pxi, dp_hot,
+                edp_hot, edp_lcd, emac_gcc, emac_phy_intr, forced_usb, gcc_gp,
+                gp_pdm, gps_tx, hs0_mi2s, hs1_mi2s, jitter_bist, ldo_en,
+                ldo_update, m_voc, mclk1, mclk2, mdp_vsync, mdp_vsync0_out,
+                mdp_vsync1_out, mdp_vsync2_out, mdp_vsync3_out, mdp_vsync4_out,
+                mdp_vsync5_out, mi2s_1, mss_lte, nav_pps_in, nav_pps_out,
+                pa_indicator_or, pcie_clk_req, pcie_ep_rst, phase_flag, pll_bist,
+                pll_bypassnl, pll_reset_n, prng_rosc, qdss_cti, qdss_gpio,
+                qlink_enable, qlink_request, qspi, qup0, qup1, rgmii,
+                sd_write_protect, sp_cmu, ter_mi2s, tgu_ch, uim1, uim2, usb0_hs,
+                usb1_hs, usb_phy_ps, vfr_1, vsense_trigger_mirnat, wlan, wsa_clk,
+                wsa_data ]
+
+    required:
+      - pins
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tlmm: pinctrl@3000000 {
+        compatible = "qcom,qcs615-tlmm";
+        reg = <0x03100000 0x300000>,
+              <0x03500000 0x300000>,
+              <0x03c00000 0x300000>;
+        reg-names = "east", "west", "south";
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-ranges = <&tlmm 0 0 123>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        qup3-uart2-state {
+            pins ="gpio16", "gpio17";
+            function = "qup0";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcs8300-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qcs8300-tlmm.yaml
new file mode 100644
index 000000000000..bb0d7132886a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcs8300-tlmm.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,qcs8300-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. QCS8300 TLMM block
+
+maintainers:
+  - Jingyi Wang <quic_jingyw@quicinc.com>
+
+description: |
+  Top Level Mode Multiplexer pin controller in Qualcomm QCS8300 SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,qcs8300-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 67
+
+  gpio-line-names:
+    maxItems: 133
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-qcs8300-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-qcs8300-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-qcs8300-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-2][0-9]|13[0-2])$"
+            - enum: [ ufs_reset, sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ aoss_cti, atest_char, atest_usb2, audio_ref, cam_mclk,
+                cci_async, cci_i2c_scl, cci_i2c_sda, cci_timer, cri_trng,
+                dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3,
+                edp0_hot, edp0_lcd, edp1_lcd, egpio, emac0_mcg0, emac0_mcg1,
+                emac0_mcg2, emac0_mcg3, emac0_mdc, emac0_mdio, emac0_ptp_aux,
+                emac0_ptp_pps, gcc_gp1, gcc_gp2, gcc_gp3, gcc_gp4, gcc_gp5,
+                gpio, hs0_mi2s, hs1_mi2s, hs2_mi2s, ibi_i3c, jitter_bist,
+                mdp0_vsync0, mdp0_vsync1, mdp0_vsync3, mdp0_vsync6, mdp0_vsync7,
+                mdp_vsync, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws,
+                mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, mi2s_mclk0,
+                mi2s_mclk1, pcie0_clkreq, pcie1_clkreq, phase_flag, pll_bist,
+                pll_clk, prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3,
+                qdss_cti, qdss_gpio, qup0_se0, qup0_se1, qup0_se2, qup0_se3,
+                qup0_se4, qup0_se5, qup0_se6, qup0_se7, qup1_se0, qup1_se1,
+                qup1_se2, qup1_se3, qup1_se4, qup1_se5, qup1_se6, qup1_se7,
+                qup2_se0, sailss_emac0, sailss_ospi, sail_top, sgmii_phy,
+                tb_trig, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm1,
+                tsense_pwm2, tsense_pwm3, tsense_pwm4, usb2phy_ac,
+                vsense_trigger ]
+
+    required:
+      - pins
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tlmm: pinctrl@f100000 {
+        compatible = "qcom,qcs8300-tlmm";
+        reg = <0x0f100000 0x300000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 133>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        qup-uart7-state {
+            pins = "gpio43", "gpio44";
+            function = "qup0_se7";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml
index e9abbf2c0689..749dbc563ac5 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml
@@ -17,7 +17,13 @@ allOf:
 
 properties:
   compatible:
-    const: qcom,sa8775p-tlmm
+    oneOf:
+      - items:
+          - enum:
+              - qcom,sa8255p-tlmm
+          - const: qcom,sa8775p-tlmm
+      - items:
+          - const: qcom,sa8775p-tlmm
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sar2130p-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sar2130p-tlmm.yaml
new file mode 100644
index 000000000000..b388380b1ce0
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sar2130p-tlmm.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sar2130p-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SAR2130P TLMM block
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm SAR2130P SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sar2130p-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 78
+
+  gpio-line-names:
+    maxItems: 156
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sar2130p-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sar2130p-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sar2130p-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-5])$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ aoss_cti, atest_char, atest_char0, atest_char1, atest_char2,
+                atest_char3, atest_usb0, atest_usb00, atest_usb01, atest_usb02,
+                atest_usb03, audio_ref, cam_mclk, cci_async, cci_i2c,
+                cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
+                cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0,
+                ddr_pxi1, ddr_pxi2, ddr_pxi3, dp0_hot, ext_mclk0, ext_mclk1,
+                gcc_gp1, gcc_gp2, gcc_gp3, gpio, host2wlan_sol, i2s0_data0,
+                i2s0_data1, i2s0_sck, i2s0_ws, ibi_i3c, jitter_bist, mdp_vsync,
+                mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, pcie0_clkreqn,
+                pcie1_clkreqn, phase_flag0, phase_flag1, phase_flag10,
+                phase_flag11, phase_flag12, phase_flag13, phase_flag14,
+                phase_flag15, phase_flag16, phase_flag17, phase_flag18,
+                phase_flag19, phase_flag2, phase_flag20, phase_flag21,
+                phase_flag22, phase_flag23, phase_flag24, phase_flag25,
+                phase_flag26, phase_flag27, phase_flag28, phase_flag29,
+                phase_flag3, phase_flag30, phase_flag31, phase_flag4,
+                phase_flag5, phase_flag6, phase_flag7, phase_flag8,
+                phase_flag9, pll_bist, pll_clk, prng_rosc0, prng_rosc1,
+                prng_rosc2, prng_rosc3, qdss_cti, qdss_gpio, qdss_gpio0,
+                qdss_gpio1, qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13,
+                qdss_gpio14, qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4,
+                qdss_gpio5, qdss_gpio6, qdss_gpio7, qdss_gpio8, qdss_gpio9,
+                qspi0, qspi1, qspi2, qspi3, qspi_clk, qspi_cs0, qspi_cs1, qup0,
+                qup1, qup2, qup3, qup4, qup5, qup6, qup7, qup8, qup9, qup10,
+                qup11, tb_trig, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3,
+                tmess_prng0, tmess_prng1, tmess_prng2, tmess_prng3,
+                tsense_pwm1, tsense_pwm2, usb0_phy, vsense_trigger ]
+
+    required:
+      - pins
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl@f100000 {
+        compatible = "qcom,sar2130p-tlmm";
+        reg = <0x0f100000 0x300000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 156>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+        gpio-wo-state {
+            pins = "gpio1";
+            function = "gpio";
+        };
+
+        uart-w-state {
+            rx-pins {
+                pins = "gpio26";
+                function = "qup7";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio27";
+                function = "qup7";
+                bias-disable;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml
index db7214362301..e90a5274647d 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml
@@ -16,7 +16,11 @@ description:
 
 properties:
   compatible:
-    const: qcom,sm8650-lpass-lpi-pinctrl
+    oneOf:
+      - const: qcom,sm8650-lpass-lpi-pinctrl
+      - items:
+          - const: qcom,sm8750-lpass-lpi-pinctrl
+          - const: qcom,sm8650-lpass-lpi-pinctrl
 
   reg:
     items:
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8750-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8750-tlmm.yaml
new file mode 100644
index 000000000000..7aecc97745a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8750-tlmm.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8750-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SM8750 TLMM block
+
+maintainers:
+  - Melody Olvera <quic_molvera@quicinc.com>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm SM8750 SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm8750-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 108
+
+  gpio-line-names:
+    maxItems: 215
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sm8750-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sm8750-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sm8750-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9]|21[0-4])$"
+            - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ gpio, aoss_cti, atest_char, atest_usb, audio_ext_mclk0,
+                audio_ext_mclk1, audio_ref_clk, cam_aon_mclk2, cam_aon_mclk4,
+                cam_mclk, cci_async_in, cci_i2c_scl, cci_i2c_sda, cci_timer,
+                cmu_rng, coex_uart1_rx, coex_uart1_tx, coex_uart2_rx,
+                coex_uart2_tx, dbg_out_clk, ddr_bist_complete, ddr_bist_fail,
+                ddr_bist_start, ddr_bist_stop, ddr_pxi0, ddr_pxi1, ddr_pxi2,
+                ddr_pxi3, dp_hot, egpio, gcc_gp1, gcc_gp2, gcc_gp3, gnss_adc0,
+                gnss_adc1, i2chub0_se0, i2chub0_se1, i2chub0_se2, i2chub0_se3,
+                i2chub0_se4, i2chub0_se5, i2chub0_se6, i2chub0_se7, i2chub0_se8,
+                i2chub0_se9, i2s0_data0, i2s0_data1, i2s0_sck, i2s0_ws,
+                i2s1_data0, i2s1_data1, i2s1_sck, i2s1_ws, ibi_i3c, jitter_bist,
+                mdp_esync0_out, mdp_esync1_out, mdp_vsync, mdp_vsync0_out,
+                mdp_vsync1_out, mdp_vsync2_out, mdp_vsync3_out, mdp_vsync5_out,
+                mdp_vsync_e, nav_gpio0, nav_gpio1, nav_gpio2, nav_gpio3,
+                pcie0_clk_req_n, phase_flag, pll_bist_sync, pll_clk_aux,
+                prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti,
+                qlink_big_enable, qlink_big_request, qlink_little_enable,
+                qlink_little_request, qlink_wmss, qspi0, qspi1, qspi2, qspi3,
+                qspi_clk, qspi_cs, qup1_se0, qup1_se1, qup1_se2, qup1_se3,
+                qup1_se4, qup1_se5, qup1_se6, qup1_se7, qup2_se0, qup2_se1,
+                qup2_se2, qup2_se3, qup2_se4, qup2_se5, qup2_se6, qup2_se7,
+                sd_write_protect, sdc40, sdc41, sdc42, sdc43, sdc4_clk,
+                sdc4_cmd, tb_trig_sdc2, tb_trig_sdc4, tmess_prng0, tmess_prng1,
+                tmess_prng2, tmess_prng3, tsense_pwm1, tsense_pwm2, tsense_pwm3,
+                tsense_pwm4, uim0_clk, uim0_data, uim0_present, uim0_reset,
+                uim1_clk, uim1_data, uim1_present, uim1_reset, usb1_hs, usb_phy,
+                vfr_0, vfr_1, vsense_trigger_mirnat, wcn_sw, wcn_sw_ctrl ]
+
+    required:
+      - pins
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@f100000 {
+        compatible = "qcom,sm8750-tlmm";
+        reg = <0x0f100000 0x300000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 216>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+        gpio-wo-state {
+            pins = "gpio1";
+            function = "gpio";
+        };
+
+        uart-w-state {
+            rx-pins {
+                pins = "gpio60";
+                function = "qup1_se7";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio61";
+                function = "qup1_se7";
+                bias-disable;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
index 56d90c8e1fa3..a1805b6e3f63 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
@@ -119,6 +119,10 @@ additionalProperties:
         bias-disable: true
         bias-pull-down: true
         bias-pull-up: true
+        input-schmitt-enable: true
+        input-schmitt-disable: true
+        drive-open-drain: true
+        drive-push-pull: true
         renesas,output-impedance:
           description:
             Output impedance for pins on the RZ/V2H(P) SoC. The value provided by this
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml
index 4dfb49b0e07f..68ed714eb0a1 100644
--- a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml
@@ -42,10 +42,13 @@ properties:
               - samsung,exynos5433-wakeup-eint
               - samsung,exynos7885-wakeup-eint
               - samsung,exynos850-wakeup-eint
+              - samsung,exynos8895-wakeup-eint
           - const: samsung,exynos7-wakeup-eint
       - items:
           - enum:
               - google,gs101-wakeup-eint
+              - samsung,exynos9810-wakeup-eint
+              - samsung,exynos990-wakeup-eint
               - samsung,exynosautov9-wakeup-eint
           - const: samsung,exynos850-wakeup-eint
           - const: samsung,exynos7-wakeup-eint
@@ -91,14 +94,18 @@ allOf:
   - if:
       properties:
         compatible:
-          # Match without "contains", to skip newer variants which are still
-          # compatible with samsung,exynos7-wakeup-eint
-          enum:
-            - samsung,s5pv210-wakeup-eint
-            - samsung,exynos4210-wakeup-eint
-            - samsung,exynos5433-wakeup-eint
-            - samsung,exynos7-wakeup-eint
-            - samsung,exynos7885-wakeup-eint
+          oneOf:
+            # Match without "contains", to skip newer variants which are still
+            # compatible with samsung,exynos7-wakeup-eint
+            - enum:
+                - samsung,exynos4210-wakeup-eint
+                - samsung,exynos7-wakeup-eint
+                - samsung,s5pv210-wakeup-eint
+            - contains:
+                enum:
+                  - samsung,exynos5433-wakeup-eint
+                  - samsung,exynos7885-wakeup-eint
+                  - samsung,exynos8895-wakeup-eint
     then:
       properties:
         interrupts:
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml
index 242dd13c276b..5296a9e4faae 100644
--- a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml
@@ -53,6 +53,9 @@ properties:
       - samsung,exynos7-pinctrl
       - samsung,exynos7885-pinctrl
       - samsung,exynos850-pinctrl
+      - samsung,exynos8895-pinctrl
+      - samsung,exynos9810-pinctrl
+      - samsung,exynos990-pinctrl
       - samsung,exynosautov9-pinctrl
       - samsung,exynosautov920-pinctrl
       - tesla,fsd-pinctrl
diff --git a/Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml b/Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml
index 4214d7311f6b..39d7dad3313b 100644
--- a/Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml
@@ -26,6 +26,10 @@ properties:
   reg:
     maxItems: 1
 
+  gpio-line-names:
+    minItems: 5
+    maxItems: 17
+
   interrupts:
     maxItems: 1
 
@@ -88,6 +92,45 @@ required:
 allOf:
   - $ref: pinctrl.yaml#
   - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - semtech,sx1501q
+              - semtech,sx1504q
+              - semtech,sx1507q
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 5
+          maxItems: 5
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - semtech,sx1502q
+              - semtech,sx1505q
+              - semtech,sx1508q
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 9
+          maxItems: 9
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - semtech,sx1503q
+              - semtech,sx1506q
+              - semtech,sx1509q
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 17
+          maxItems: 17
+  - if:
       not:
         properties:
           compatible:
diff --git a/Documentation/devicetree/bindings/pinctrl/sophgo,cv1800-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/sophgo,cv1800-pinctrl.yaml
index 1e6a55afe26a..feb4785a3fac 100644
--- a/Documentation/devicetree/bindings/pinctrl/sophgo,cv1800-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/sophgo,cv1800-pinctrl.yaml
@@ -58,7 +58,7 @@ patternProperties:
           pinmux:
             description: |
               The list of GPIOs and their mux settings that properties in the
-              node apply to. This should be set using the GPIOMUX or GPIOMUX2
+              node apply to. This should be set using the PINMUX or PINMUX2
               macro.
 
           bias-pull-up:
diff --git a/Documentation/devicetree/bindings/pinctrl/spacemit,k1-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/spacemit,k1-pinctrl.yaml
new file mode 100644
index 000000000000..b01ecd83b71b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/spacemit,k1-pinctrl.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/spacemit,k1-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SpacemiT K1 SoC Pin Controller
+
+maintainers:
+  - Yixun Lan <dlan@gentoo.org>
+
+properties:
+  compatible:
+    const: spacemit,k1-pinctrl
+
+  reg:
+    items:
+      - description: pinctrl io memory base
+
+patternProperties:
+  '-cfg$':
+    type: object
+    additionalProperties: false
+
+    description:
+      A pinctrl node should contain at least one subnode representing the
+      pinctrl groups available on the machine.
+
+    patternProperties:
+      '-pins$':
+        type: object
+        additionalProperties: false
+
+        description:
+          Each subnode will list the pins it needs, and how they should
+          be configured, with regard to muxer configuration, bias pull,
+          drive strength, input schmitt trigger, slew rate, power source.
+
+        allOf:
+          - $ref: pincfg-node.yaml#
+          - $ref: pinmux-node.yaml#
+
+        properties:
+          pinmux:
+            description:
+              The list of GPIOs and their mux settings that properties in the
+              node apply to. This should be set using the K1_PADCONF macro to
+              construct the value.
+
+          bias-disable: true
+
+          bias-pull-down: true
+
+          bias-pull-up:
+            description: |
+              typical value for selecting bias pull up or strong pull up.
+              0: normal bias pull up
+              1: strong bias pull up
+            enum: [ 0, 1 ]
+
+          drive-strength:
+            description: |
+              typical current when output high level.
+              1.8V output: 11, 21, 32, 42 (mA)
+              3.3V output: 7, 10, 13, 16, 19, 23, 26, 29 (mA)
+
+          input-schmitt:
+            description: |
+              typical threshold for schmitt trigger.
+              0: buffer mode
+              1: trigger mode
+              2, 3: trigger mode
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [ 0, 1, 2, 3 ]
+
+          power-source:
+            description: external power supplies at 1.8v or 3.3v.
+            enum: [ 1800, 3300 ]
+
+          slew-rate:
+            description: |
+              slew rate for output buffer.
+              0: disable it
+              1: enable it (via bundled value from drive strength)
+              2: slow speed 0
+              3: slow speed 1
+              4: medium speed
+              5: fast speed
+            enum: [ 0, 1, 2, 3, 4, 5 ]
+
+        required:
+          - pinmux
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #define K1_PADCONF(pin, func) (((pin) << 16) | (func))
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pinctrl@d401e000 {
+            compatible = "spacemit,k1-pinctrl";
+            reg = <0x0 0xd401e000 0x0 0x400>;
+
+            uart0_2_cfg: uart0-2-cfg {
+                uart0-2-pins {
+                    pinmux = <K1_PADCONF(68, 2)>,
+                             <K1_PADCONF(69, 2)>;
+
+                    bias-pull-up = <0>;
+                    drive-strength = <32>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/thead,th1520-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/thead,th1520-pinctrl.yaml
new file mode 100644
index 000000000000..21f86740a63d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/thead,th1520-pinctrl.yaml
@@ -0,0 +1,176 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/thead,th1520-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: T-Head TH1520 SoC pin controller
+
+maintainers:
+  - Emil Renner Berthing <emil.renner.berthing@canonical.com>
+
+description: |
+  Pinmux and pinconf controller in the T-Head TH1520 RISC-V SoC.
+
+  The TH1520 has 3 groups of pads each controlled from different memory ranges.
+  Confusingly the memory ranges are named
+    PADCTRL_AOSYS  -> PAD Group 1
+    PADCTRL1_APSYS -> PAD Group 2
+    PADCTRL0_APSYS -> PAD Group 3
+
+  Each pad can be muxed individually to up to 6 different functions. For most
+  pads only a few of those 6 configurations are valid though, and a few pads in
+  group 1 does not support muxing at all.
+
+  Pinconf is fairly regular except for a few pads in group 1 that either can't
+  be configured or has some special functions. The rest have configurable drive
+  strength, input enable, schmitt trigger, slew rate, pull-up and pull-down in
+  addition to a special strong pull up.
+
+  Certain pads in group 1 can be muxed to AUDIO_PA0 - AUDIO_PA30 functions and
+  are then meant to be used by the audio co-processor. Each such pad can then
+  be further muxed to either audio GPIO or one of 4 functions such as UART, I2C
+  and I2S. If the audio pad is muxed to one of the 4 functions then pinconf is
+  also configured in different registers. All of this is done from a different
+  AUDIO_IOCTRL memory range and is left to the audio co-processor for now.
+
+properties:
+  compatible:
+    enum:
+      - thead,th1520-pinctrl
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  thead,pad-group:
+    description: |
+      Select the pad group that is associated with the pin controller instance.
+
+        Base Address   Name           Group
+        0xFF_FFF4_A000 PADCTRL_AOSYS  1
+        0xFF_E7F3_C000 PADCTRL1_APSYS 2
+        0xFF_EC00_7000 PADCTRL0_APSYS 3
+
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 3]
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+patternProperties:
+  '-[0-9]+$':
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      '-pins$':
+        type: object
+        allOf:
+          - $ref: /schemas/pinctrl/pincfg-node.yaml#
+          - $ref: /schemas/pinctrl/pinmux-node.yaml#
+
+        additionalProperties: false
+
+        description:
+          A pinctrl node should contain at least one subnode describing one
+          or more pads and their associated pinmux and pinconf settings.
+
+        properties:
+          pins:
+            description: List of pads that properties in the node apply to.
+
+          function:
+            enum: [ gpio, pwm, uart, ir, i2c, spi, qspi, sdio, audio, i2s,
+                    gmac0, gmac1, dpu0, dpu1, isp, hdmi, bootsel, debug,
+                    clock, jtag, iso7816, efuse, reset ]
+            description: The mux function to select for the given pins.
+
+          bias-disable: true
+
+          bias-pull-up:
+            oneOf:
+              - type: boolean
+                description: Enable the regular 48kOhm pull-up
+              - enum: [ 2100, 48000 ]
+                description: Enable the strong 2.1kOhm pull-up or regular 48kOhm pull-up
+
+          bias-pull-down:
+            oneOf:
+              - type: boolean
+              - const: 44000
+            description: Enable the regular 44kOhm pull-down
+
+          drive-strength:
+            enum: [ 1, 2, 3, 5, 7, 8, 10, 12, 13, 15, 16, 18, 20, 21, 23, 25 ]
+            description: Drive strength in mA
+
+          input-enable: true
+
+          input-disable: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+          slew-rate:
+            maximum: 1
+
+        required:
+          - pins
+
+additionalProperties: false
+
+examples:
+  - |
+    padctrl0_apsys: pinctrl@ec007000 {
+        compatible = "thead,th1520-pinctrl";
+        reg = <0xec007000 0x1000>;
+        clocks = <&apb_clk>;
+        thead,pad-group = <3>;
+
+        uart0_pins: uart0-0 {
+            tx-pins {
+                pins = "UART0_TXD";
+                function = "uart";
+                bias-disable;
+                drive-strength = <3>;
+                input-disable;
+                input-schmitt-disable;
+                slew-rate = <0>;
+            };
+
+            rx-pins {
+                pins = "UART0_RXD";
+                function = "uart";
+                bias-disable;
+                drive-strength = <1>;
+                input-enable;
+                input-schmitt-enable;
+                slew-rate = <0>;
+            };
+        };
+    };
+
+    padctrl1_apsys: pinctrl@e7f3c000 {
+        compatible = "thead,th1520-pinctrl";
+        reg = <0xe7f3c000 0x1000>;
+        clocks = <&apb_clk>;
+        thead,pad-group = <2>;
+
+        i2c5_pins: i2c5-0 {
+            i2c-pins {
+                pins = "QSPI1_CSN0",    /* I2C5_SCL */
+                       "QSPI1_D0_MOSI"; /* I2C5_SDA */
+                function = "i2c";
+                bias-pull-up = <2100>;
+                drive-strength = <7>;
+                input-enable;
+                input-schmitt-enable;
+                slew-rate = <0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,versal-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,versal-pinctrl.yaml
new file mode 100644
index 000000000000..55ece6a8be5e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/xlnx,versal-pinctrl.yaml
@@ -0,0 +1,278 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/xlnx,versal-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Versal Pinctrl
+
+maintainers:
+  - Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
+
+description: |
+  Please refer to pinctrl-bindings.txt in this directory for details of the
+  common pinctrl bindings used by client devices, including the meaning of the
+  phrase "pin configuration node".
+
+  Versal's pin configuration nodes act as a container for an arbitrary number of
+  subnodes. Each of these subnodes represents some desired configuration for a
+  pin, a group, or a list of pins or groups. This configuration can include the
+  mux function to select on those pin(s)/group(s), and various pin configuration
+  parameters, such as pull-up, slew rate, etc.
+
+  Each configuration node can consist of multiple nodes describing the pinmux and
+  pinconf options. Those nodes can be pinmux nodes or pinconf nodes.
+
+properties:
+  compatible:
+    const: xlnx,versal-pinctrl
+
+patternProperties:
+  '^(.*-)?(default|gpio-grp)$':
+    type: object
+    patternProperties:
+      '^mux':
+        type: object
+        description:
+          Pinctrl node's client devices use subnodes for pin muxes,
+          which in turn use below standard properties.
+        $ref: pinmux-node.yaml#
+
+        properties:
+          pins:
+            description:
+              List of pins to select (either this or "groups" must be specified)
+            $ref: "#/$defs/pins/properties/pins"
+
+          groups:
+            description:
+              List of groups to select (either this or "pins" must be
+              specified), available groups for this subnode.
+            anyOf:
+              - pattern: '^((LPD|PMC)_)MIO([0-9]|[1-6][0-9]|7[0-7])$'
+              - $ref: "#/$defs/pins/properties/groups"
+
+          function:
+            description:
+              Specify the alternative function to be configured for the
+              given pin groups.
+            enum: [spi0, spi0_ss, spi1, spi1_ss, can0, can1, i2c0, i2c1, i2c_pmc, ttc0_clk,
+                   ttc0_wav, ttc1_clk, ttc1_wav, ttc2_clk, ttc2_wav, ttc3_clk, ttc3_wav, wwdt0,
+                   wwdt1, sysmon_i2c0, sysmon_i2c0_alrt, uart0, uart0_ctrl, uart1, uart1_ctrl,
+                   gpio0, gpio1, gpio2, emio0, gem0, gem1, trace0, trace0_clk, mdio0, mdio1, gem_tsu0,
+                   pcie0, smap0, usb0, sd0, sd0_pc, sd0_cd, sd0_wp, sd1, sd1_pc, sd1_wp, sd1_cd,
+                   ospi0, ospi0_ss, qspi0, qspi0_fbclk, qspi0_ss, test_clk, test_scan, tamper_trigger]
+
+        required:
+          - function
+
+        oneOf:
+          - required: [ groups ]
+          - required: [ pins ]
+
+        additionalProperties: false
+
+      '^conf':
+        type: object
+        description:
+          Pinctrl node's client devices use subnodes for pin configurations,
+          which in turn use the standard properties below.
+        allOf:
+          - $ref: pincfg-node.yaml#
+          - $ref: "#/$defs/pins"
+
+    additionalProperties: false
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+
+additionalProperties: false
+
+$defs:
+  pins:
+    properties:
+      groups:
+        description:
+          List of pin groups to select in this subnode.
+        items:
+          enum: [spi0_0_grp, spi0_1_grp, spi0_2_grp, spi0_3_grp, spi0_4_grp, spi0_5_grp,
+                 spi0_ss_0_grp, spi0_ss_1_grp, spi0_ss_2_grp, spi0_ss_3_grp, spi0_ss_4_grp,
+                 spi0_ss_5_grp, spi0_ss_6_grp, spi0_ss_7_grp, spi0_ss_8_grp, spi0_ss_9_grp,
+                 spi0_ss_10_grp, spi0_ss_11_grp, spi0_ss_12_grp, spi0_ss_13_grp, spi0_ss_14_grp,
+                 spi0_ss_15_grp, spi0_ss_16_grp, spi0_ss_17_grp, spi1_0_grp, spi1_1_grp,
+                 spi1_2_grp, spi1_3_grp, spi1_4_grp, spi1_5_grp, spi1_ss_0_grp, spi1_ss_1_grp,
+                 spi1_ss_2_grp, spi1_ss_3_grp, spi1_ss_4_grp, spi1_ss_5_grp, spi1_ss_6_grp,
+                 spi1_ss_7_grp, spi1_ss_8_grp, spi1_ss_9_grp, spi1_ss_10_grp, spi1_ss_11_grp,
+                 spi1_ss_12_grp, spi1_ss_13_grp, spi1_ss_14_grp, spi1_ss_15_grp, spi1_ss_16_grp
+                 spi1_ss_17_grp, can0_0_grp, can0_1_grp, can0_2_grp, can0_3_grp, can0_4_grp,
+                 can0_5_grp, can0_6_grp, can0_7_grp, can0_8_grp, can0_9_grp, can0_10_grp,
+                 can0_11_grp, can0_12_grp, can0_13_grp, can0_14_grp, can0_15_grp, can0_16_grp,
+                 can0_17_grp, can1_0_grp, can1_1_grp, can1_2_grp, can1_3_grp, can1_4_grp,
+                 can1_5_grp, can1_6_grp, can1_7_grp, can1_8_grp, can1_9_grp, can1_10_grp,
+                 can1_11_grp, can1_12_grp, can1_13_grp, can1_14_grp, can1_15_grp, can1_16_grp,
+                 can1_17_grp, can1_18_grp, i2c0_0_grp, i2c0_1_grp, i2c0_2_grp, i2c0_3_grp,
+                 i2c0_4_grp, i2c0_5_grp, i2c0_6_grp, i2c0_7_grp, i2c0_8_grp, i2c0_9_grp,
+                 i2c0_10_grp, i2c0_11_grp, i2c0_12_grp, i2c0_13_grp, i2c0_14_grp, i2c0_15_grp,
+                 i2c0_16_grp, i2c0_17_grp, i2c1_0_grp, i2c1_1_grp, i2c1_2_grp, i2c1_3_grp,
+                 i2c1_4_grp, i2c1_5_grp, i2c1_6_grp, i2c1_7_grp, i2c1_8_grp, i2c1_9_grp,
+                 i2c1_10_grp, i2c1_11_grp, i2c1_12_grp, i2c1_13_grp, i2c1_14_grp, i2c1_15_grp,
+                 i2c1_16_grp, i2c1_17_grp, i2c1_18_grp, i2c_pmc_0_grp, i2c_pmc_1_grp,
+                 i2c_pmc_2_grp, i2c_pmc_3_grp, i2c_pmc_4_grp, i2c_pmc_5_grp, i2c_pmc_6_grp,
+                 i2c_pmc_7_grp, i2c_pmc_8_grp, i2c_pmc_9_grp, i2c_pmc_10_grp, i2c_pmc_11_grp,
+                 i2c_pmc_12_grp, ttc0_clk_0_grp, ttc0_clk_1_grp, ttc0_clk_2_grp, ttc0_clk_3_grp,
+                 ttc0_clk_4_grp, ttc0_clk_5_grp, ttc0_clk_6_grp, ttc0_clk_7_grp, ttc0_clk_8_grp,
+                 ttc0_wav_0_grp, ttc0_wav_1_grp, ttc0_wav_2_grp, ttc0_wav_3_grp, ttc0_wav_4_grp,
+                 ttc0_wav_5_grp, ttc0_wav_6_grp, ttc0_wav_7_grp, ttc0_wav_8_grp, ttc1_clk_0_grp,
+                 ttc1_clk_1_grp, ttc1_clk_2_grp, ttc1_clk_3_grp, ttc1_clk_4_grp, ttc1_clk_5_grp,
+                 ttc1_clk_6_grp, ttc1_clk_7_grp, ttc1_clk_8_grp, ttc1_wav_0_grp, ttc1_wav_1_grp,
+                 ttc1_wav_2_grp, ttc1_wav_3_grp, ttc1_wav_4_grp, ttc1_wav_5_grp, ttc1_wav_6_grp,
+                 ttc1_wav_7_grp, ttc1_wav_8_grp, ttc2_clk_0_grp, ttc2_clk_1_grp, ttc2_clk_2_grp,
+                 ttc2_clk_3_grp, ttc2_clk_4_grp, ttc2_clk_5_grp, ttc2_clk_6_grp, ttc2_clk_7_grp,
+                 ttc2_clk_8_grp, ttc2_wav_0_grp, ttc2_wav_1_grp, ttc2_wav_2_grp, ttc2_wav_3_grp,
+                 ttc2_wav_4_grp, ttc2_wav_5_grp, ttc2_wav_6_grp, ttc2_wav_7_grp, ttc2_wav_8_grp,
+                 ttc3_clk_0_grp, ttc3_clk_1_grp, ttc3_clk_2_grp, ttc3_clk_3_grp, ttc3_clk_4_grp,
+                 ttc3_clk_5_grp, ttc3_clk_6_grp, ttc3_clk_7_grp, ttc3_clk_8_grp, ttc3_wav_0_grp,
+                 ttc3_wav_1_grp, ttc3_wav_2_grp, ttc3_wav_3_grp, ttc3_wav_4_grp, ttc3_wav_5_grp,
+                 ttc3_wav_6_grp, ttc3_wav_7_grp, ttc3_wav_8_grp, wwdt0_0_grp, wwdt0_1_grp,
+                 wwdt0_2_grp, wwdt0_3_grp, wwdt0_4_grp, wwdt0_5_grp, wwdt1_0_grp, wwdt1_1_grp,
+                 wwdt1_2_grp, wwdt1_3_grp, wwdt1_4_grp, wwdt1_5_grp, sysmon_i2c0_0_grp,
+                 sysmon_i2c0_1_grp, sysmon_i2c0_2_grp, sysmon_i2c0_3_grp, sysmon_i2c0_4_grp,
+                 sysmon_i2c0_5_grp, sysmon_i2c0_6_grp, sysmon_i2c0_7_grp, sysmon_i2c0_8_grp,
+                 sysmon_i2c0_9_grp, sysmon_i2c0_10_grp, sysmon_i2c0_11_grp, sysmon_i2c0_12_grp,
+                 sysmon_i2c0_13_grp, sysmon_i2c0_14_grp, sysmon_i2c0_15_grp,
+                 sysmon_i2c0_16_grp, sysmon_i2c0_17_grp, sysmon_i2c0_alrt_0_grp,
+                 sysmon_i2c0_alrt_1_grp, sysmon_i2c0_alrt_2_grp, sysmon_i2c0_alrt_3_grp,
+                 sysmon_i2c0_alrt_4_grp, sysmon_i2c0_alrt_5_grp, sysmon_i2c0_alrt_6_grp,
+                 sysmon_i2c0_alrt_7_grp, sysmon_i2c0_alrt_8_grp, sysmon_i2c0_alrt_9_grp,
+                 sysmon_i2c0_alrt_10_grp, sysmon_i2c0_alrt_11_grp, sysmon_i2c0_alrt_12_grp,
+                 sysmon_i2c0_alrt_13_grp, sysmon_i2c0_alrt_14_grp, sysmon_i2c0_alrt_15_grp,
+                 sysmon_i2c0_alrt_16_grp, sysmon_i2c0_alrt_17_grp, uart0_0_grp, uart0_1_grp,
+                 uart0_2_grp, uart0_3_grp, uart0_4_grp, uart0_5_grp, uart0_6_grp, uart0_7_grp,
+                 uart0_8_grp, uart0_ctrl_0_grp, uart0_ctrl_1_grp, uart0_ctrl_2_grp,
+                 uart0_ctrl_3_grp, uart0_ctrl_4_grp, uart0_ctrl_5_grp, uart0_ctrl_6_grp,
+                 uart0_ctrl_7_grp, uart0_ctrl_8_grp, uart1_0_grp, uart1_1_grp, uart1_2_grp,
+                 uart1_3_grp, uart1_4_grp, uart1_5_grp, uart1_6_grp, uart1_7_grp, uart1_8_grp,
+                 uart1_ctrl_0_grp, uart1_ctrl_1_grp, uart1_ctrl_2_grp, uart1_ctrl_3_grp,
+                 uart1_ctrl_4_grp, uart1_ctrl_5_grp, uart1_ctrl_6_grp, uart1_ctrl_7_grp,
+                 uart1_ctrl_8_grp, gpio0_0_grp, gpio0_1_grp, gpio0_2_grp, gpio0_3_grp,
+                 gpio0_4_grp, gpio0_5_grp, gpio0_6_grp, gpio0_7_grp, gpio0_8_grp, gpio0_9_grp,
+                 gpio0_10_grp, gpio0_11_grp, gpio0_12_grp, gpio0_13_grp, gpio0_14_grp,
+                 gpio0_15_grp, gpio0_16_grp, gpio0_17_grp, gpio0_18_grp, gpio0_19_grp,
+                 gpio0_20_grp, gpio0_21_grp, gpio0_22_grp, gpio0_23_grp, gpio0_24_grp,
+                 gpio0_25_grp, gpio1_0_grp, gpio1_1_grp, gpio1_2_grp, gpio1_3_grp, gpio1_4_grp,
+                 gpio1_5_grp, gpio1_6_grp, gpio1_7_grp, gpio1_8_grp, gpio1_9_grp,
+                 gpio1_10_grp, gpio1_11_grp, gpio1_12_grp, gpio1_13_grp, gpio1_14_grp,
+                 gpio1_15_grp, gpio1_16_grp, gpio1_17_grp, gpio1_18_grp, gpio1_19_grp,
+                 gpio1_20_grp, gpio1_21_grp, gpio1_22_grp, gpio1_23_grp, gpio1_24_grp,
+                 gpio1_25_grp, gpio2_0_grp, gpio2_1_grp, gpio2_2_grp, gpio2_3_grp, gpio2_4_grp,
+                 gpio2_5_grp, gpio2_6_grp, gpio2_7_grp, gpio2_8_grp, gpio2_9_grp, gpio2_10_grp,
+                 gpio2_11_grp, gpio2_12_grp, gpio2_13_grp, gpio2_14_grp, gpio2_15_grp,
+                 gpio2_16_grp, gpio2_17_grp, gpio2_18_grp, gpio2_19_grp, gpio2_20_grp,
+                 gpio2_21_grp, gpio2_22_grp, gpio2_23_grp, gpio2_24_grp, gpio2_25_grp,
+                 emio0_0_grp, emio0_1_grp, emio0_2_grp, emio0_3_grp, emio0_4_grp, emio0_5_grp,
+                 emio0_6_grp, emio0_7_grp, emio0_8_grp, emio0_9_grp, emio0_10_grp,
+                 emio0_11_grp, emio0_12_grp, emio0_13_grp, emio0_14_grp, emio0_15_grp,
+                 emio0_16_grp, emio0_17_grp, emio0_18_grp, emio0_19_grp, emio0_20_grp,
+                 emio0_21_grp, emio0_22_grp, emio0_23_grp, emio0_24_grp, emio0_25_grp,
+                 emio0_26_grp, emio0_27_grp, emio0_28_grp, emio0_29_grp, emio0_30_grp,
+                 emio0_31_grp, emio0_32_grp, emio0_33_grp, emio0_34_grp, emio0_35_grp,
+                 emio0_36_grp, emio0_37_grp, emio0_38_grp, emio0_39_grp, emio0_40_grp,
+                 emio0_41_grp, emio0_42_grp, emio0_43_grp, emio0_44_grp, emio0_45_grp,
+                 emio0_46_grp, emio0_47_grp, emio0_48_grp, emio0_49_grp, emio0_50_grp,
+                 emio0_51_grp, emio0_52_grp, emio0_53_grp, emio0_54_grp, emio0_55_grp,
+                 emio0_56_grp, emio0_57_grp, emio0_58_grp, emio0_59_grp, emio0_60_grp,
+                 emio0_61_grp, emio0_62_grp, emio0_63_grp, emio0_64_grp, emio0_65_grp,
+                 emio0_66_grp, emio0_67_grp, emio0_68_grp, emio0_69_grp, emio0_70_grp,
+                 emio0_71_grp, emio0_72_grp, emio0_73_grp, emio0_74_grp, emio0_75_grp,
+                 emio0_76_grp, emio0_77_grp, gem0_0_grp, gem0_1_grp, gem1_0_grp, gem1_1_grp,
+                 trace0_0_grp, trace0_1_grp, trace0_2_grp, trace0_clk_0_grp, trace0_clk_1_grp,
+                 trace0_clk_2_grp, mdio0_0_grp, mdio0_1_grp, mdio1_0_grp, mdio1_1_grp,
+                 gem_tsu0_0_grp, gem_tsu0_1_grp, gem_tsu0_2_grp, gem_tsu0_3_grp, pcie0_0_grp,
+                 pcie0_1_grp, pcie0_2_grp, smap0_0_grp, usb0_0_grp, sd0_0_grp, sd0_1_grp,
+                 sd0_2_grp, sd0_3_grp, sd0_4_grp, sd0_5_grp, sd0_6_grp, sd0_7_grp, sd0_8_grp,
+                 sd0_9_grp, sd0_10_grp, sd0_11_grp, sd0_12_grp, sd0_13_grp, sd0_14_grp,
+                 sd0_15_grp, sd0_16_grp, sd0_17_grp, sd0_18_grp, sd0_19_grp, sd0_20_grp,
+                 sd0_21_grp, sd0_pc_0_grp, sd0_pc_1_grp, sd0_cd_0_grp, sd0_cd_1_grp,
+                 sd0_wp_0_grp, sd0_wp_1_grp, sd1_0_grp, sd1_1_grp, sd1_2_grp, sd1_3_grp,
+                 sd1_4_grp, sd1_5_grp, sd1_6_grp, sd1_7_grp, sd1_8_grp, sd1_9_grp, sd1_10_grp,
+                 sd1_11_grp, sd1_12_grp, sd1_13_grp, sd1_14_grp, sd1_15_grp, sd1_16_grp,
+                 sd1_17_grp, sd1_18_grp, sd1_19_grp, sd1_20_grp, sd1_21_grp, sd1_pc_0_grp,
+                 sd1_pc_1_grp, sd1_cd_0_grp, sd1_cd_1_grp, sd1_wp_0_grp, sd1_wp_1_grp,
+                 ospi0_0_grp, ospi0_ss_0_grp, qspi0_0_grp, qspi0_fbclk_0_grp, qspi0_ss_0_grp,
+                 test_clk_0_grp, test_scan_0_grp, tamper_trigger_0_grp]
+        minItems: 1
+        maxItems: 78
+
+      pins:
+        description:
+          List of pin names to select in this subnode.
+        items:
+          pattern: '^((LPD|PMC)_)MIO([0-9]|[1-6][0-9]|7[0-7])$'
+        minItems: 1
+        maxItems: 78
+
+      bias-pull-up: true
+      bias-pull-down: true
+      bias-disable: true
+      input-schmitt-enable: true
+      input-schmitt-disable: true
+      bias-high-impedance: true
+      low-power-enable: true
+      low-power-disable: true
+
+      slew-rate:
+        enum: [0, 1]
+
+      output-enable:
+        description:
+          This will internally disable the tri-state for MIO pins.
+
+      drive-strength:
+        description:
+          Selects the drive strength for MIO pins, in mA.
+        enum: [2, 4, 8, 12]
+
+      power-source:
+        enum: [0, 1]
+
+    oneOf:
+      - required: [ groups ]
+      - required: [ pins ]
+
+    additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+    pinctrl {
+      compatible = "xlnx,versal-pinctrl";
+
+      uart0-default {
+        mux {
+          groups = "uart0_4_grp", "uart0_5_grp";
+          function = "uart0";
+        };
+
+        conf {
+          groups = "uart0_4_grp";
+          slew-rate = <SLEW_RATE_SLOW>;
+          power-source = <IO_STANDARD_LVCMOS18>;
+        };
+
+        conf-rx {
+          pins = "PMC_MIO42";
+          bias-pull-up;
+        };
+
+        conf-tx {
+          pins = "PMC_MIO43";
+          bias-disable;
+          input-schmitt-disable;
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/pwm/airoha,en7581-pwm.yaml b/Documentation/devicetree/bindings/pwm/airoha,en7581-pwm.yaml
new file mode 100644
index 000000000000..f36387572a97
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/airoha,en7581-pwm.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/airoha,en7581-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha EN7581 PWM Controller
+
+maintainers:
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    const: airoha,en7581-pwm
+
+  "#pwm-cells":
+    const: 3
+
+required:
+  - compatible
+  - "#pwm-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    pwm {
+      compatible = "airoha,en7581-pwm";
+
+      #pwm-cells = <3>;
+    };