Merge tag 'pm-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These include cpuidle changes to use nanoseconds (instead of
  microseconds) as the unit of time and to simplify checks for disabled
  idle states in the idle loop, some cpuidle fixes and governor updates,
  assorted cpufreq updates (driver updates mostly and a few core fixes
  and cleanups), devfreq updates (dominated by the tegra30 driver
  changes), new CPU IDs for the RAPL power capping driver, relatively
  minor updates of the generic power domains (genpd) and operation
  performance points (OPP) frameworks, and assorted fixes and cleanups.

  There are also two maintainer information updates: Chanwoo Choi will
  be maintaining the devfreq subsystem going forward and Todd Brandt is
  going to maintain the pm-graph utility (created by him).

  Specifics:

   - Use nanoseconds (instead of microseconds) as the unit of time in
     the cpuidle core and simplify checks for disabled idle states in
     the idle loop (Rafael Wysocki)

   - Fix and clean up the teo cpuidle governor (Rafael Wysocki)

   - Fix the cpuidle registration error code path (Zhenzhong Duan)

   - Avoid excessive vmexits in the ACPI cpuidle driver (Yin Fengwei)

   - Extend the idle injection infrastructure to be able to measure the
     requested duration in nanoseconds and to allow an exit latency
     limit for idle states to be specified (Daniel Lezcano)

   - Fix cpufreq driver registration and clarify a comment in the
     cpufreq core (Viresh Kumar)

   - Add NULL checks to the show() and store() methods of sysfs
     attributes exposed by cpufreq (Kai Shen)

   - Update cpufreq drivers:
      * Fix for a plain int as pointer warning from sparse in
        intel_pstate (Jamal Shareef)
      * Fix for a hardcoded number of CPUs and stack bloat in the
        powernv driver (John Hubbard)
      * Updates to the ti-cpufreq driver and DT files to support new
        platforms and migrate bindings from opp-v1 to opp-v2 (Adam Ford,
        H. Nikolaus Schaller)
      * Merging of the arm_big_little and vexpress-spc drivers and
        related cleanup (Sudeep Holla)
      * Fix for imx's default speed grade value (Anson Huang)
      * Minor cleanup of the s3c64xx driver (Nathan Chancellor)
      * CPU speed bin detection fix for sun50i (Ondrej Jirman)

   - Appoint Chanwoo Choi as the new devfreq maintainer.

   - Update the devfreq core:
      * Check NULL governor in available_governors_show sysfs to prevent
        showing wrong governor information and fix a race condition
        between devfreq_update_status() and trans_stat_show() (Leonard
        Crestez)
      * Add new 'interrupt-driven' flag for devfreq governors to allow
        interrupt-driven governors to prevent the devfreq core from
        polling devices for status (Dmitry Osipenko)
      * Improve an error message in devfreq_add_device() (Matthias
        Kaehlcke)

   - Update devfreq drivers:
      * tegra30 driver fixes and cleanups (Dmitry Osipenko)
      * Removal of unused property from dt-binding documentation for the
        exynos-bus driver (Kamil Konieczny)
      * exynos-ppmu cleanup and DT bindings update (Lukasz Luba, Marek
        Szyprowski)

   - Add new CPU IDs for CometLake Mobile and Desktop to the Intel RAPL
     power capping driver (Zhang Rui)

   - Allow device initialization in the generic power domains (genpd)
     framework to be more straightforward and clean it up (Ulf Hansson)

   - Add support for adjusting OPP voltages at run time to the OPP
     framework (Stephen Boyd)

   - Avoid freeing memory that has never been allocated in the
     hibernation core (Andy Whitcroft)

   - Clean up function headers in a header file and coding style in the
     wakeup IRQs handling code (Ulf Hansson, Xiaofei Tan)

   - Clean up the SmartReflex adaptive voltage scaling (AVS) driver for
     ARM (Ben Dooks, Geert Uytterhoeven)

   - Wrap power management documentation to fit in 80 columns (Bjorn
     Helgaas)

   - Add pm-graph utility entry to MAINTAINERS (Todd Brandt)

   - Update the cpupower utility:
      * Fix the handling of set and info subcommands (Abhishek Goel)
      * Fix build warnings (Nathan Chancellor)
      * Improve mperf_monitor handling (Janakarajan Natarajan)"

* tag 'pm-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (83 commits)
  PM: Wrap documentation to fit in 80 columns
  cpuidle: Pass exit latency limit to cpuidle_use_deepest_state()
  cpuidle: Allow idle injection to apply exit latency limit
  cpuidle: Introduce cpuidle_driver_state_disabled() for driver quirks
  cpuidle: teo: Avoid code duplication in conditionals
  cpufreq: Register drivers only after CPU devices have been registered
  cpuidle: teo: Avoid using "early hits" incorrectly
  cpuidle: teo: Exclude cpuidle overhead from computations
  PM / Domains: Convert to dev_to_genpd_safe() in genpd_syscore_switch()
  mmc: tmio: Avoid boilerplate code in ->runtime_suspend()
  PM / Domains: Implement the ->start() callback for genpd
  PM / Domains: Introduce dev_pm_domain_start()
  ARM: OMAP2+: SmartReflex: add omap_sr_pdata definition
  PM / wakeirq: remove unnecessary parentheses
  power: avs: smartreflex: Remove superfluous cast in debugfs_create_file() call
  cpuidle: Use nanoseconds as the unit of time
  PM / OPP: Support adjusting OPP voltages at runtime
  PM / core: Clean up some function headers in power.h
  cpufreq: Add NULL checks to show() and store() methods of cpufreq
  cpufreq: intel_pstate: Fix plain int as pointer warning from sparse
  ...

12 files changed, 127 insertions, 92 deletions

diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index b301f753ed2c..e77635c5422c 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -43,7 +43,7 @@ SoC Families:
 
 - OMAP2 generic - defaults to OMAP2420
   compatible = "ti,omap2"
-- OMAP3 generic - defaults to OMAP3430
+- OMAP3 generic
   compatible = "ti,omap3"
 - OMAP4 generic - defaults to OMAP4430
   compatible = "ti,omap4"
@@ -51,6 +51,8 @@ SoC Families:
   compatible = "ti,omap5"
 - DRA7 generic - defaults to DRA742
   compatible = "ti,dra7"
+- AM33x generic
+  compatible = "ti,am33xx"
 - AM43x generic - defaults to AM4372
   compatible = "ti,am43"
 
@@ -63,12 +65,14 @@ SoCs:
 
 - OMAP3430
   compatible = "ti,omap3430", "ti,omap3"
+  legacy: "ti,omap34xx" - please do not use any more
 - AM3517
   compatible = "ti,am3517", "ti,omap3"
 - OMAP3630
-  compatible = "ti,omap36xx", "ti,omap3"
-- AM33xx
-  compatible = "ti,am33xx", "ti,omap3"
+  compatible = "ti,omap3630", "ti,omap3"
+  legacy: "ti,omap36xx" - please do not use any more
+- AM335x
+  compatible = "ti,am33xx"
 
 - OMAP4430
   compatible = "ti,omap4430", "ti,omap4"
@@ -110,19 +114,19 @@ SoCs:
 - AM4372
   compatible = "ti,am4372", "ti,am43"
 
-Boards:
+Boards (incomplete list of examples):
 
 - OMAP3 BeagleBoard : Low cost community board
-  compatible = "ti,omap3-beagle", "ti,omap3"
+  compatible = "ti,omap3-beagle", "ti,omap3430", "ti,omap3"
 
 - OMAP3 Tobi with Overo : Commercial expansion board with daughter board
-  compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3"
+  compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3"
 
 - OMAP4 SDP : Software Development Board
-  compatible = "ti,omap4-sdp", "ti,omap4430"
+  compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4"
 
 - OMAP4 PandaBoard : Low cost community board
-  compatible = "ti,omap4-panda", "ti,omap4430"
+  compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4"
 
 - OMAP4 DuoVero with Parlor : Commercial expansion board with daughter board
   compatible = "gumstix,omap4-duovero-parlor", "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4";
@@ -134,16 +138,16 @@ Boards:
   compatible = "variscite,var-dvk-om44", "variscite,var-som-om44", "ti,omap4460", "ti,omap4";
 
 - OMAP3 EVM : Software Development Board for OMAP35x, AM/DM37x
-  compatible = "ti,omap3-evm", "ti,omap3"
+  compatible = "ti,omap3-evm", "ti,omap3630", "ti,omap3"
 
 - AM335X EVM : Software Development Board for AM335x
-  compatible = "ti,am335x-evm", "ti,am33xx", "ti,omap3"
+  compatible = "ti,am335x-evm", "ti,am33xx"
 
 - AM335X Bone : Low cost community board
-  compatible = "ti,am335x-bone", "ti,am33xx", "ti,omap3"
+  compatible = "ti,am335x-bone", "ti,am33xx"
 
 - AM3359 ICEv2 : Low cost Industrial Communication Engine EVM.
-  compatible = "ti,am3359-icev2", "ti,am33xx", "ti,omap3"
+  compatible = "ti,am3359-icev2", "ti,am33xx"
 
 - AM335X OrionLXm : Substation Automation Platform
   compatible = "novatech,am335x-lxm", "ti,am33xx"
diff --git a/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt
index 0c38e4b8fc51..1758051798fe 100644
--- a/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt
+++ b/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt
@@ -15,12 +15,16 @@ In 'cpus' nodes:
 
 In 'operating-points-v2' table:
 - compatible: Should be
-	- 'operating-points-v2-ti-cpu' for am335x, am43xx, and dra7xx/am57xx SoCs
+	- 'operating-points-v2-ti-cpu' for am335x, am43xx, and dra7xx/am57xx,
+	  omap34xx, omap36xx and am3517 SoCs
 - syscon: A phandle pointing to a syscon node representing the control module
 	  register space of the SoC.
 
 Optional properties:
 --------------------
+- "vdd-supply", "vbb-supply": to define two regulators for dra7xx
+- "cpu0-supply", "vbb-supply": to define two regulators for omap36xx
+
 For each opp entry in 'operating-points-v2' table:
 - opp-supported-hw: Two bitfields indicating:
 	1. Which revision of the SoC the OPP is supported by
diff --git a/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt b/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt
index 3e36c1d11386..fb46b491791c 100644
--- a/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt
+++ b/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt
@@ -10,14 +10,23 @@ The Exynos PPMU driver uses the devfreq-event class to provide event data
 to various devfreq devices. The devfreq devices would use the event data when
 derterming the current state of each IP.
 
-Required properties:
+Required properties for PPMU device:
 - compatible: Should be "samsung,exynos-ppmu" or "samsung,exynos-ppmu-v2.
 - reg: physical base address of each PPMU and length of memory mapped region.
 
-Optional properties:
+Optional properties for PPMU device:
 - clock-names : the name of clock used by the PPMU, "ppmu"
 - clocks : phandles for clock specified in "clock-names" property
 
+Required properties for 'events' child node of PPMU device:
+- event-name : the unique event name among PPMU device
+Optional properties for 'events' child node of PPMU device:
+- event-data-type : Define the type of data which shell be counted
+by the counter. You can check include/dt-bindings/pmu/exynos_ppmu.h for
+all possible type, i.e. count read requests, count write data in bytes,
+etc. This field is optional and when it is missing, the driver code
+will use default data type.
+
 Example1 : PPMUv1 nodes in exynos3250.dtsi are listed below.
 
 		ppmu_dmc0: ppmu_dmc0@106a0000 {
@@ -145,3 +154,16 @@ Example3 : PPMUv2 nodes in exynos5433.dtsi are listed below.
 			reg = <0x104d0000 0x2000>;
 			status = "disabled";
 		};
+
+Example4 : 'event-data-type' in exynos4412-ppmu-common.dtsi are listed below.
+
+	&ppmu_dmc0 {
+		status = "okay";
+		events {
+			ppmu_dmc0_3: ppmu-event3-dmc0 {
+			event-name = "ppmu-event3-dmc0";
+			event-data-type = <(PPMU_RO_DATA_CNT |
+					PPMU_WO_DATA_CNT)>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt
index f8e946471a58..e71f752cc18f 100644
--- a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt
+++ b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt
@@ -50,8 +50,6 @@ Required properties only for passive bus device:
 Optional properties only for parent bus device:
 - exynos,saturation-ratio: the percentage value which is used to calibrate
 			the performance count against total cycle count.
-- exynos,voltage-tolerance: the percentage value for bus voltage tolerance
-			which is used to calculate the max voltage.
 
 Detailed correlation between sub-blocks and power line according to Exynos SoC:
 - In case of Exynos3250, there are two power line as following:
diff --git a/Documentation/power/drivers-testing.rst b/Documentation/power/drivers-testing.rst
index e53f1999fc39..d77d2894f9fe 100644
--- a/Documentation/power/drivers-testing.rst
+++ b/Documentation/power/drivers-testing.rst
@@ -39,9 +39,10 @@ c) Compile the driver directly into the kernel and try the test modes of
 d) Attempt to hibernate with the driver compiled directly into the kernel
    in the "reboot", "shutdown" and "platform" modes.
 
-e) Try the test modes of suspend (see: Documentation/power/basic-pm-debugging.rst,
-   2).  [As far as the STR tests are concerned, it should not matter whether or
-   not the driver is built as a module.]
+e) Try the test modes of suspend (see:
+   Documentation/power/basic-pm-debugging.rst, 2).  [As far as the STR tests are
+   concerned, it should not matter whether or not the driver is built as a
+   module.]
 
 f) Attempt to suspend to RAM using the s2ram tool with the driver loaded
    (see: Documentation/power/basic-pm-debugging.rst, 2).
diff --git a/Documentation/power/freezing-of-tasks.rst b/Documentation/power/freezing-of-tasks.rst
index ef110fe55e82..8bd693399834 100644
--- a/Documentation/power/freezing-of-tasks.rst
+++ b/Documentation/power/freezing-of-tasks.rst
@@ -215,30 +215,31 @@ VI. Are there any precautions to be taken to prevent freezing failures?
 
 Yes, there are.
 
-First of all, grabbing the 'system_transition_mutex' lock to mutually exclude a piece of code
-from system-wide sleep such as suspend/hibernation is not encouraged.
-If possible, that piece of code must instead hook onto the suspend/hibernation
-notifiers to achieve mutual exclusion. Look at the CPU-Hotplug code
-(kernel/cpu.c) for an example.
-
-However, if that is not feasible, and grabbing 'system_transition_mutex' is deemed necessary,
-it is strongly discouraged to directly call mutex_[un]lock(&system_transition_mutex) since
-that could lead to freezing failures, because if the suspend/hibernate code
-successfully acquired the 'system_transition_mutex' lock, and hence that other entity failed
-to acquire the lock, then that task would get blocked in TASK_UNINTERRUPTIBLE
-state. As a consequence, the freezer would not be able to freeze that task,
-leading to freezing failure.
+First of all, grabbing the 'system_transition_mutex' lock to mutually exclude a
+piece of code from system-wide sleep such as suspend/hibernation is not
+encouraged.  If possible, that piece of code must instead hook onto the
+suspend/hibernation notifiers to achieve mutual exclusion. Look at the
+CPU-Hotplug code (kernel/cpu.c) for an example.
+
+However, if that is not feasible, and grabbing 'system_transition_mutex' is
+deemed necessary, it is strongly discouraged to directly call
+mutex_[un]lock(&system_transition_mutex) since that could lead to freezing
+failures, because if the suspend/hibernate code successfully acquired the
+'system_transition_mutex' lock, and hence that other entity failed to acquire
+the lock, then that task would get blocked in TASK_UNINTERRUPTIBLE state. As a
+consequence, the freezer would not be able to freeze that task, leading to
+freezing failure.
 
 However, the [un]lock_system_sleep() APIs are safe to use in this scenario,
 since they ask the freezer to skip freezing this task, since it is anyway
-"frozen enough" as it is blocked on 'system_transition_mutex', which will be released
-only after the entire suspend/hibernation sequence is complete.
-So, to summarize, use [un]lock_system_sleep() instead of directly using
+"frozen enough" as it is blocked on 'system_transition_mutex', which will be
+released only after the entire suspend/hibernation sequence is complete.  So, to
+summarize, use [un]lock_system_sleep() instead of directly using
 mutex_[un]lock(&system_transition_mutex). That would prevent freezing failures.
 
 V. Miscellaneous
 ================
 
 /sys/power/pm_freeze_timeout controls how long it will cost at most to freeze
-all user space processes or all freezable kernel threads, in unit of millisecond.
-The default value is 20000, with range of unsigned integer.
+all user space processes or all freezable kernel threads, in unit of
+millisecond.  The default value is 20000, with range of unsigned integer.
diff --git a/Documentation/power/opp.rst b/Documentation/power/opp.rst
index 209c7613f5a4..e3cc4f349ea8 100644
--- a/Documentation/power/opp.rst
+++ b/Documentation/power/opp.rst
@@ -73,19 +73,21 @@ factors. Example usage: Thermal management or other exceptional situations where
 SoC framework might choose to disable a higher frequency OPP to safely continue
 operations until that OPP could be re-enabled if possible.
 
-OPP library facilitates this concept in it's implementation. The following
+OPP library facilitates this concept in its implementation. The following
 operational functions operate only on available opps:
-opp_find_freq_{ceil, floor}, dev_pm_opp_get_voltage, dev_pm_opp_get_freq, dev_pm_opp_get_opp_count
+opp_find_freq_{ceil, floor}, dev_pm_opp_get_voltage, dev_pm_opp_get_freq,
+dev_pm_opp_get_opp_count
 
-dev_pm_opp_find_freq_exact is meant to be used to find the opp pointer which can then
-be used for dev_pm_opp_enable/disable functions to make an opp available as required.
+dev_pm_opp_find_freq_exact is meant to be used to find the opp pointer
+which can then be used for dev_pm_opp_enable/disable functions to make an
+opp available as required.
 
 WARNING: Users of OPP library should refresh their availability count using
-get_opp_count if dev_pm_opp_enable/disable functions are invoked for a device, the
-exact mechanism to trigger these or the notification mechanism to other
-dependent subsystems such as cpufreq are left to the discretion of the SoC
-specific framework which uses the OPP library. Similar care needs to be taken
-care to refresh the cpufreq table in cases of these operations.
+get_opp_count if dev_pm_opp_enable/disable functions are invoked for a
+device, the exact mechanism to trigger these or the notification mechanism
+to other dependent subsystems such as cpufreq are left to the discretion of
+the SoC specific framework which uses the OPP library. Similar care needs
+to be taken care to refresh the cpufreq table in cases of these operations.
 
 2. Initial OPP List Registration
 ================================
@@ -99,11 +101,11 @@ OPPs dynamically using the dev_pm_opp_enable / disable functions.
 dev_pm_opp_add
 	Add a new OPP for a specific domain represented by the device pointer.
 	The OPP is defined using the frequency and voltage. Once added, the OPP
-	is assumed to be available and control of it's availability can be done
-	with the dev_pm_opp_enable/disable functions. OPP library internally stores
-	and manages this information in the opp struct. This function may be
-	used by SoC framework to define a optimal list as per the demands of
-	SoC usage environment.
+	is assumed to be available and control of its availability can be done
+	with the dev_pm_opp_enable/disable functions. OPP library
+	internally stores and manages this information in the opp struct.
+	This function may be used by SoC framework to define a optimal list
+	as per the demands of SoC usage environment.
 
 	WARNING:
 		Do not use this function in interrupt context.
@@ -354,7 +356,7 @@ struct dev_pm_opp
 
 struct device
 	This is used to identify a domain to the OPP layer. The
-	nature of the device and it's implementation is left to the user of
+	nature of the device and its implementation is left to the user of
 	OPP library such as the SoC framework.
 
 Overall, in a simplistic view, the data structure operations is represented as
diff --git a/Documentation/power/pci.rst b/Documentation/power/pci.rst
index 0e2ef7429304..51e0a493d284 100644
--- a/Documentation/power/pci.rst
+++ b/Documentation/power/pci.rst
@@ -426,12 +426,12 @@ pm->runtime_idle() callback.
 2.4. System-Wide Power Transitions
 ----------------------------------
 There are a few different types of system-wide power transitions, described in
-Documentation/driver-api/pm/devices.rst.  Each of them requires devices to be handled
-in a specific way and the PM core executes subsystem-level power management
-callbacks for this purpose.  They are executed in phases such that each phase
-involves executing the same subsystem-level callback for every device belonging
-to the given subsystem before the next phase begins.  These phases always run
-after tasks have been frozen.
+Documentation/driver-api/pm/devices.rst.  Each of them requires devices to be
+handled in a specific way and the PM core executes subsystem-level power
+management callbacks for this purpose.  They are executed in phases such that
+each phase involves executing the same subsystem-level callback for every device
+belonging to the given subsystem before the next phase begins.  These phases
+always run after tasks have been frozen.
 
 2.4.1. System Suspend
 ^^^^^^^^^^^^^^^^^^^^^
@@ -636,12 +636,12 @@ System restore requires a hibernation image to be loaded into memory and the
 pre-hibernation memory contents to be restored before the pre-hibernation system
 activity can be resumed.
 
-As described in Documentation/driver-api/pm/devices.rst, the hibernation image is loaded
-into memory by a fresh instance of the kernel, called the boot kernel, which in
-turn is loaded and run by a boot loader in the usual way.  After the boot kernel
-has loaded the image, it needs to replace its own code and data with the code
-and data of the "hibernated" kernel stored within the image, called the image
-kernel.  For this purpose all devices are frozen just like before creating
+As described in Documentation/driver-api/pm/devices.rst, the hibernation image
+is loaded into memory by a fresh instance of the kernel, called the boot kernel,
+which in turn is loaded and run by a boot loader in the usual way.  After the
+boot kernel has loaded the image, it needs to replace its own code and data with
+the code and data of the "hibernated" kernel stored within the image, called the
+image kernel.  For this purpose all devices are frozen just like before creating
 the image during hibernation, in the
 
 	prepare, freeze, freeze_noirq
@@ -691,8 +691,8 @@ controlling the runtime power management of their devices.
 
 At the time of this writing there are two ways to define power management
 callbacks for a PCI device driver, the recommended one, based on using a
-dev_pm_ops structure described in Documentation/driver-api/pm/devices.rst, and the
-"legacy" one, in which the .suspend(), .suspend_late(), .resume_early(), and
+dev_pm_ops structure described in Documentation/driver-api/pm/devices.rst, and
+the "legacy" one, in which the .suspend(), .suspend_late(), .resume_early(), and
 .resume() callbacks from struct pci_driver are used.  The legacy approach,
 however, doesn't allow one to define runtime power management callbacks and is
 not really suitable for any new drivers.  Therefore it is not covered by this
diff --git a/Documentation/power/pm_qos_interface.rst b/Documentation/power/pm_qos_interface.rst
index 3097694fba69..0d62d506caf0 100644
--- a/Documentation/power/pm_qos_interface.rst
+++ b/Documentation/power/pm_qos_interface.rst
@@ -8,8 +8,8 @@ one of the parameters.
 
 Two different PM QoS frameworks are available:
 1. PM QoS classes for cpu_dma_latency
-2. the per-device PM QoS framework provides the API to manage the per-device latency
-constraints and PM QoS flags.
+2. The per-device PM QoS framework provides the API to manage the
+   per-device latency constraints and PM QoS flags.
 
 Each parameters have defined units:
 
@@ -47,14 +47,14 @@ void pm_qos_add_request(handle, param_class, target_value):
   pm_qos API functions.
 
 void pm_qos_update_request(handle, new_target_value):
-  Will update the list element pointed to by the handle with the new target value
-  and recompute the new aggregated target, calling the notification tree if the
-  target is changed.
+  Will update the list element pointed to by the handle with the new target
+  value and recompute the new aggregated target, calling the notification tree
+  if the target is changed.
 
 void pm_qos_remove_request(handle):
-  Will remove the element.  After removal it will update the aggregate target and
-  call the notification tree if the target was changed as a result of removing
-  the request.
+  Will remove the element.  After removal it will update the aggregate target
+  and call the notification tree if the target was changed as a result of
+  removing the request.
 
 int pm_qos_request(param_class):
   Returns the aggregated value for a given PM QoS class.
@@ -167,9 +167,9 @@ int dev_pm_qos_expose_flags(device, value)
   change the value of the PM_QOS_FLAG_NO_POWER_OFF flag.
 
 void dev_pm_qos_hide_flags(device)
-  Drop the request added by dev_pm_qos_expose_flags() from the device's PM QoS list
-  of flags and remove sysfs attribute pm_qos_no_power_off from the device's power
-  directory.
+  Drop the request added by dev_pm_qos_expose_flags() from the device's PM QoS
+  list of flags and remove sysfs attribute pm_qos_no_power_off from the device's
+  power directory.
 
 Notification mechanisms:
 
@@ -179,8 +179,8 @@ int dev_pm_qos_add_notifier(device, notifier, type):
   Adds a notification callback function for the device for a particular request
   type.
 
-  The callback is called when the aggregated value of the device constraints list
-  is changed.
+  The callback is called when the aggregated value of the device constraints
+  list is changed.
 
 int dev_pm_qos_remove_notifier(device, notifier, type):
   Removes the notification callback function for the device.
diff --git a/Documentation/power/runtime_pm.rst b/Documentation/power/runtime_pm.rst
index 2c2ec99b5088..ab8406c84254 100644
--- a/Documentation/power/runtime_pm.rst
+++ b/Documentation/power/runtime_pm.rst
@@ -268,8 +268,8 @@ defined in include/linux/pm.h:
   `unsigned int runtime_auto;`
     - if set, indicates that the user space has allowed the device driver to
       power manage the device at run time via the /sys/devices/.../power/control
-      `interface;` it may only be modified with the help of the pm_runtime_allow()
-      and pm_runtime_forbid() helper functions
+      `interface;` it may only be modified with the help of the
+      pm_runtime_allow() and pm_runtime_forbid() helper functions
 
   `unsigned int no_callbacks;`
     - indicates that the device does not use the runtime PM callbacks (see
diff --git a/Documentation/power/suspend-and-cpuhotplug.rst b/Documentation/power/suspend-and-cpuhotplug.rst
index 7ac8e1f549f4..572d968c5375 100644
--- a/Documentation/power/suspend-and-cpuhotplug.rst
+++ b/Documentation/power/suspend-and-cpuhotplug.rst
@@ -106,8 +106,8 @@ execution during resume):
 * Release system_transition_mutex lock.
 
 
-It is to be noted here that the system_transition_mutex lock is acquired at the very
-beginning, when we are just starting out to suspend, and then released only
+It is to be noted here that the system_transition_mutex lock is acquired at the
+very beginning, when we are just starting out to suspend, and then released only
 after the entire cycle is complete (i.e., suspend + resume).
 
 ::
@@ -165,7 +165,8 @@ Important files and functions/entry points:
 
 - kernel/power/process.c : freeze_processes(), thaw_processes()
 - kernel/power/suspend.c : suspend_prepare(), suspend_enter(), suspend_finish()
-- kernel/cpu.c: cpu_[up|down](), _cpu_[up|down](), [disable|enable]_nonboot_cpus()
+- kernel/cpu.c: cpu_[up|down](), _cpu_[up|down](),
+  [disable|enable]_nonboot_cpus()
 
 
 
diff --git a/Documentation/power/swsusp.rst b/Documentation/power/swsusp.rst
index d000312f6965..8524f079e05c 100644
--- a/Documentation/power/swsusp.rst
+++ b/Documentation/power/swsusp.rst
@@ -118,7 +118,8 @@ In a really perfect world::
 
   echo 1 > /proc/acpi/sleep       # for standby
   echo 2 > /proc/acpi/sleep       # for suspend to ram
-  echo 3 > /proc/acpi/sleep       # for suspend to ram, but with more power conservative
+  echo 3 > /proc/acpi/sleep       # for suspend to ram, but with more power
+                                  # conservative
   echo 4 > /proc/acpi/sleep       # for suspend to disk
   echo 5 > /proc/acpi/sleep       # for shutdown unfriendly the system
 
@@ -192,8 +193,8 @@ Q:
 
 A:
   The freezing of tasks is a mechanism by which user space processes and some
-  kernel threads are controlled during hibernation or system-wide suspend (on some
-  architectures).  See freezing-of-tasks.txt for details.
+  kernel threads are controlled during hibernation or system-wide suspend (on
+  some architectures).  See freezing-of-tasks.txt for details.
 
 Q:
   What is the difference between "platform" and "shutdown"?
@@ -282,7 +283,8 @@ A:
       suspend(PMSG_FREEZE): devices are frozen so that they don't interfere
       with state snapshot
 
-      state snapshot: copy of whole used memory is taken with interrupts disabled
+      state snapshot: copy of whole used memory is taken with interrupts
+      disabled
 
       resume(): devices are woken up so that we can write image to swap
 
@@ -353,8 +355,8 @@ Q:
 
 A:
   Generally, yes, you can.  However, it requires you to use the "resume=" and
-  "resume_offset=" kernel command line parameters, so the resume from a swap file
-  cannot be initiated from an initrd or initramfs image.  See
+  "resume_offset=" kernel command line parameters, so the resume from a swap
+  file cannot be initiated from an initrd or initramfs image.  See
   swsusp-and-swap-files.txt for details.
 
 Q: