ide: remove the legacy ide driver

The legay ide driver has been replace with libata starting in 2003 and has
been scheduled for removal for a while.  Finally kill it off so that we
can start cleaning up various bits of cruft it forced on the block layer.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

1 files changed, 2 insertions, 797 deletions

diff --git a/Documentation/userspace-api/ioctl/hdio.rst b/Documentation/userspace-api/ioctl/hdio.rst
index 817371bf94e9..6ee8fc88699f 100644
--- a/Documentation/userspace-api/ioctl/hdio.rst
+++ b/Documentation/userspace-api/ioctl/hdio.rst
@@ -7,8 +7,8 @@ Summary of `HDIO_` ioctl calls
 November, 2004
 
 This document attempts to describe the ioctl(2) calls supported by
-the HD/IDE layer.  These are by-and-large implemented (as of Linux 2.6)
-in drivers/ide/ide.c and drivers/block/scsi_ioctl.c
+the HD/IDE layer.  These are by-and-large implemented (as of Linux 5.11)
+drivers/ata/libata-scsi.c.
 
 ioctl values are listed in <linux/hdreg.h>.  As of this writing, they
 are as follows:
@@ -17,50 +17,17 @@ are as follows:
 
 	=======================	=======================================
 	HDIO_GETGEO		get device geometry
-	HDIO_GET_UNMASKINTR	get current unmask setting
-	HDIO_GET_MULTCOUNT	get current IDE blockmode setting
-	HDIO_GET_QDMA		get use-qdma flag
-	HDIO_SET_XFER		set transfer rate via proc
-	HDIO_OBSOLETE_IDENTITY	OBSOLETE, DO NOT USE
-	HDIO_GET_KEEPSETTINGS	get keep-settings-on-reset flag
 	HDIO_GET_32BIT		get current io_32bit setting
-	HDIO_GET_NOWERR		get ignore-write-error flag
-	HDIO_GET_DMA		get use-dma flag
-	HDIO_GET_NICE		get nice flags
 	HDIO_GET_IDENTITY	get IDE identification info
-	HDIO_GET_WCACHE		get write cache mode on|off
-	HDIO_GET_ACOUSTIC	get acoustic value
-	HDIO_GET_ADDRESS	get sector addressing mode
-	HDIO_GET_BUSSTATE	get the bus state of the hwif
-	HDIO_TRISTATE_HWIF	execute a channel tristate
-	HDIO_DRIVE_RESET	execute a device reset
 	HDIO_DRIVE_TASKFILE	execute raw taskfile
 	HDIO_DRIVE_TASK		execute task and special drive command
 	HDIO_DRIVE_CMD		execute a special drive command
-	HDIO_DRIVE_CMD_AEB	HDIO_DRIVE_TASK
 	=======================	=======================================
 
     ioctls that pass non-pointer values:
 
 	=======================	=======================================
-	HDIO_SET_MULTCOUNT	change IDE blockmode
-	HDIO_SET_UNMASKINTR	permit other irqs during I/O
-	HDIO_SET_KEEPSETTINGS	keep ioctl settings on reset
 	HDIO_SET_32BIT		change io_32bit flags
-	HDIO_SET_NOWERR		change ignore-write-error flag
-	HDIO_SET_DMA		change use-dma flag
-	HDIO_SET_PIO_MODE	reconfig interface to new speed
-	HDIO_SCAN_HWIF		register and (re)scan interface
-	HDIO_SET_NICE		set nice flags
-	HDIO_UNREGISTER_HWIF	unregister interface
-	HDIO_SET_WCACHE		change write cache enable-disable
-	HDIO_SET_ACOUSTIC	change acoustic behavior
-	HDIO_SET_BUSSTATE	set the bus state of the hwif
-	HDIO_SET_QDMA		change use-qdma flag
-	HDIO_SET_ADDRESS	change lba addressing modes
-
-	HDIO_SET_IDE_SCSI	Set scsi emulation mode on/off
-	HDIO_SET_SCSI_IDE	not implemented yet
 	=======================	=======================================
 
 
@@ -137,143 +104,6 @@ HDIO_GETGEO
 
 
 
-
-HDIO_GET_UNMASKINTR
-	get current unmask setting
-
-
-	usage::
-
-	  long val;
-
-	  ioctl(fd, HDIO_GET_UNMASKINTR, &val);
-
-	inputs:
-		none
-
-
-
-	outputs:
-		The value of the drive's current unmask setting
-
-
-
-
-
-HDIO_SET_UNMASKINTR
-	permit other irqs during I/O
-
-
-	usage::
-
-	  unsigned long val;
-
-	  ioctl(fd, HDIO_SET_UNMASKINTR, val);
-
-	inputs:
-		New value for unmask flag
-
-
-
-	outputs:
-		none
-
-
-
-	error return:
-	  - EINVAL	Called on a partition instead of the whole disk device
-	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  - EINVAL	value out of range [0 1]
-	  - EBUSY	Controller busy
-
-
-
-
-HDIO_GET_MULTCOUNT
-	get current IDE blockmode setting
-
-
-	usage::
-
-	  long val;
-
-	  ioctl(fd, HDIO_GET_MULTCOUNT, &val);
-
-	inputs:
-		none
-
-
-
-	outputs:
-		The value of the current IDE block mode setting.  This
-		controls how many sectors the drive will transfer per
-		interrupt.
-
-
-
-HDIO_SET_MULTCOUNT
-	change IDE blockmode
-
-
-	usage::
-
-	  int val;
-
-	  ioctl(fd, HDIO_SET_MULTCOUNT, val);
-
-	inputs:
-		New value for IDE block mode setting.  This controls how many
-		sectors the drive will transfer per interrupt.
-
-	outputs:
-		none
-
-
-
-	error return:
-	  - EINVAL	Called on a partition instead of the whole disk device
-	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  - EINVAL	value out of range supported by disk.
-	  - EBUSY	Controller busy or blockmode already set.
-	  - EIO		Drive did not accept new block mode.
-
-	notes:
-	  Source code comments read::
-
-	    This is tightly woven into the driver->do_special cannot
-	    touch.  DON'T do it again until a total personality rewrite
-	    is committed.
-
-	  If blockmode has already been set, this ioctl will fail with
-	  -EBUSY
-
-
-
-HDIO_GET_QDMA
-	get use-qdma flag
-
-
-	Not implemented, as of 2.6.8.1
-
-
-
-HDIO_SET_XFER
-	set transfer rate via proc
-
-
-	Not implemented, as of 2.6.8.1
-
-
-
-HDIO_OBSOLETE_IDENTITY
-	OBSOLETE, DO NOT USE
-
-
-	Same as HDIO_GET_IDENTITY (see below), except that it only
-	returns the first 142 bytes of drive identity information.
-
-
-
 HDIO_GET_IDENTITY
 	get IDE identification info
 
@@ -308,60 +138,6 @@ HDIO_GET_IDENTITY
 
 
 
-HDIO_GET_KEEPSETTINGS
-	get keep-settings-on-reset flag
-
-
-	usage::
-
-	  long val;
-
-	  ioctl(fd, HDIO_GET_KEEPSETTINGS, &val);
-
-	inputs:
-		none
-
-
-
-	outputs:
-		The value of the current "keep settings" flag
-
-
-
-	notes:
-		When set, indicates that kernel should restore settings
-		after a drive reset.
-
-
-
-HDIO_SET_KEEPSETTINGS
-	keep ioctl settings on reset
-
-
-	usage::
-
-	  long val;
-
-	  ioctl(fd, HDIO_SET_KEEPSETTINGS, val);
-
-	inputs:
-		New value for keep_settings flag
-
-
-
-	outputs:
-		none
-
-
-
-	error return:
-	  - EINVAL	Called on a partition instead of the whole disk device
-	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  - EINVAL	value out of range [0 1]
-	  - EBUSY		Controller busy
-
-
-
 HDIO_GET_32BIT
 	get current io_32bit setting
 
@@ -387,288 +163,6 @@ HDIO_GET_32BIT
 
 
 
-
-
-HDIO_GET_NOWERR
-	get ignore-write-error flag
-
-
-	usage::
-
-	  long val;
-
-	  ioctl(fd, HDIO_GET_NOWERR, &val);
-
-	inputs:
-		none
-
-
-
-	outputs:
-		The value of the current ignore-write-error flag
-
-
-
-
-
-HDIO_GET_DMA
-	get use-dma flag
-
-
-	usage::
-
-	  long val;
-
-	  ioctl(fd, HDIO_GET_DMA, &val);
-
-	inputs:
-		none
-
-
-
-	outputs:
-		The value of the current use-dma flag
-
-
-
-
-
-HDIO_GET_NICE
-	get nice flags
-
-
-	usage::
-
-	  long nice;
-
-	  ioctl(fd, HDIO_GET_NICE, &nice);
-
-	inputs:
-		none
-
-
-
-	outputs:
-		The drive's "nice" values.
-
-
-
-	notes:
-		Per-drive flags which determine when the system will give more
-		bandwidth to other devices sharing the same IDE bus.
-
-		See <linux/hdreg.h>, near symbol IDE_NICE_DSC_OVERLAP.
-
-
-
-
-HDIO_SET_NICE
-	set nice flags
-
-
-	usage::
-
-	  unsigned long nice;
-
-	  ...
-	  ioctl(fd, HDIO_SET_NICE, nice);
-
-	inputs:
-		bitmask of nice flags.
-
-
-
-	outputs:
-		none
-
-
-
-	error returns:
-	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  - EPERM	Flags other than DSC_OVERLAP and NICE_1 set.
-	  - EPERM	DSC_OVERLAP specified but not supported by drive
-
-	notes:
-		This ioctl sets the DSC_OVERLAP and NICE_1 flags from values
-		provided by the user.
-
-		Nice flags are listed in <linux/hdreg.h>, starting with
-		IDE_NICE_DSC_OVERLAP.  These values represent shifts.
-
-
-
-
-
-HDIO_GET_WCACHE
-	get write cache mode on|off
-
-
-	usage::
-
-	  long val;
-
-	  ioctl(fd, HDIO_GET_WCACHE, &val);
-
-	inputs:
-		none
-
-
-
-	outputs:
-		The value of the current write cache mode
-
-
-
-
-
-HDIO_GET_ACOUSTIC
-	get acoustic value
-
-
-	usage::
-
-	  long val;
-
-	  ioctl(fd, HDIO_GET_ACOUSTIC, &val);
-
-	inputs:
-		none
-
-
-
-	outputs:
-		The value of the current acoustic settings
-
-
-
-	notes:
-		See HDIO_SET_ACOUSTIC
-
-
-
-
-
-HDIO_GET_ADDRESS
-	usage::
-
-
-	  long val;
-
-	  ioctl(fd, HDIO_GET_ADDRESS, &val);
-
-	inputs:
-		none
-
-
-
-	outputs:
-		The value of the current addressing mode:
-
-	    =  ===================
-	    0  28-bit
-	    1  48-bit
-	    2  48-bit doing 28-bit
-	    3  64-bit
-	    =  ===================
-
-
-
-HDIO_GET_BUSSTATE
-	get the bus state of the hwif
-
-
-	usage::
-
-	  long state;
-
-	  ioctl(fd, HDIO_SCAN_HWIF, &state);
-
-	inputs:
-		none
-
-
-
-	outputs:
-		Current power state of the IDE bus.  One of BUSSTATE_OFF,
-		BUSSTATE_ON, or BUSSTATE_TRISTATE
-
-	error returns:
-	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
-
-
-
-
-HDIO_SET_BUSSTATE
-	set the bus state of the hwif
-
-
-	usage::
-
-	  int state;
-
-	  ...
-	  ioctl(fd, HDIO_SCAN_HWIF, state);
-
-	inputs:
-		Desired IDE power state.  One of BUSSTATE_OFF, BUSSTATE_ON,
-		or BUSSTATE_TRISTATE
-
-	outputs:
-		none
-
-
-
-	error returns:
-	  - EACCES	Access denied:  requires CAP_SYS_RAWIO
-	  - EOPNOTSUPP	Hardware interface does not support bus power control
-
-
-
-
-HDIO_TRISTATE_HWIF
-	execute a channel tristate
-
-
-	Not implemented, as of 2.6.8.1.  See HDIO_SET_BUSSTATE
-
-
-
-HDIO_DRIVE_RESET
-	execute a device reset
-
-
-	usage::
-
-	  int args[3]
-
-	  ...
-	  ioctl(fd, HDIO_DRIVE_RESET, args);
-
-	inputs:
-		none
-
-
-
-	outputs:
-		none
-
-
-
-	error returns:
-	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  - ENXIO	No such device:	phy dead or ctl_addr == 0
-	  - EIO		I/O error:	reset timed out or hardware error
-
-	notes:
-
-	  - Execute a reset on the device as soon as the current IO
-	    operation has completed.
-
-	  - Executes an ATAPI soft reset if applicable, otherwise
-	    executes an ATA soft reset on the controller.
-
-
-
 HDIO_DRIVE_TASKFILE
 	execute raw taskfile
 
@@ -1026,14 +520,6 @@ HDIO_DRIVE_TASK
 
 
 
-HDIO_DRIVE_CMD_AEB
-	HDIO_DRIVE_TASK
-
-
-	Not implemented, as of 2.6.8.1
-
-
-
 HDIO_SET_32BIT
 	change io_32bit flags
 
@@ -1059,284 +545,3 @@ HDIO_SET_32BIT
 	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
 	  - EINVAL	value out of range [0 3]
 	  - EBUSY	Controller busy
-
-
-
-
-HDIO_SET_NOWERR
-	change ignore-write-error flag
-
-
-	usage::
-
-	  int val;
-
-	  ioctl(fd, HDIO_SET_NOWERR, val);
-
-	inputs:
-		New value for ignore-write-error flag.  Used for ignoring
-
-
-	  WRERR_STAT
-
-	outputs:
-		none
-
-
-
-	error return:
-	  - EINVAL	Called on a partition instead of the whole disk device
-	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  - EINVAL	value out of range [0 1]
-	  - EBUSY		Controller busy
-
-
-
-HDIO_SET_DMA
-	change use-dma flag
-
-
-	usage::
-
-	  long val;
-
-	  ioctl(fd, HDIO_SET_DMA, val);
-
-	inputs:
-		New value for use-dma flag
-
-
-
-	outputs:
-		none
-
-
-
-	error return:
-	  - EINVAL	Called on a partition instead of the whole disk device
-	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  - EINVAL	value out of range [0 1]
-	  - EBUSY	Controller busy
-
-
-
-HDIO_SET_PIO_MODE
-	reconfig interface to new speed
-
-
-	usage::
-
-	  long val;
-
-	  ioctl(fd, HDIO_SET_PIO_MODE, val);
-
-	inputs:
-		New interface speed.
-
-
-
-	outputs:
-		none
-
-
-
-	error return:
-	  - EINVAL	Called on a partition instead of the whole disk device
-	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  - EINVAL	value out of range [0 255]
-	  - EBUSY	Controller busy
-
-
-
-HDIO_SCAN_HWIF
-	register and (re)scan interface
-
-
-	usage::
-
-	  int args[3]
-
-	  ...
-	  ioctl(fd, HDIO_SCAN_HWIF, args);
-
-	inputs:
-
-	  =======	=========================
-	  args[0]	io address to probe
-
-
-	  args[1]	control address to probe
-	  args[2]	irq number
-	  =======	=========================
-
-	outputs:
-		none
-
-
-
-	error returns:
-	  - EACCES	Access denied:  requires CAP_SYS_RAWIO
-	  - EIO		Probe failed.
-
-	notes:
-		This ioctl initializes the addresses and irq for a disk
-		controller, probes for drives, and creates /proc/ide
-		interfaces as appropriate.
-
-
-
-HDIO_UNREGISTER_HWIF
-	unregister interface
-
-
-	usage::
-
-	  int index;
-
-	  ioctl(fd, HDIO_UNREGISTER_HWIF, index);
-
-	inputs:
-		index		index of hardware interface to unregister
-
-
-
-	outputs:
-		none
-
-
-
-	error returns:
-	  - EACCES	Access denied:  requires CAP_SYS_RAWIO
-
-	notes:
-		This ioctl removes a hardware interface from the kernel.
-
-		Currently (2.6.8) this ioctl silently fails if any drive on
-		the interface is busy.
-
-
-
-HDIO_SET_WCACHE
-	change write cache enable-disable
-
-
-	usage::
-
-	  int val;
-
-	  ioctl(fd, HDIO_SET_WCACHE, val);
-
-	inputs:
-		New value for write cache enable
-
-
-
-	outputs:
-		none
-
-
-
-	error return:
-	  - EINVAL	Called on a partition instead of the whole disk device
-	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  - EINVAL	value out of range [0 1]
-	  - EBUSY	Controller busy
-
-
-
-HDIO_SET_ACOUSTIC
-	change acoustic behavior
-
-
-	usage::
-
-	  int val;
-
-	  ioctl(fd, HDIO_SET_ACOUSTIC, val);
-
-	inputs:
-		New value for drive acoustic settings
-
-
-
-	outputs:
-		none
-
-
-
-	error return:
-	  - EINVAL	Called on a partition instead of the whole disk device
-	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  - EINVAL	value out of range [0 254]
-	  - EBUSY	Controller busy
-
-
-
-HDIO_SET_QDMA
-	change use-qdma flag
-
-
-	Not implemented, as of 2.6.8.1
-
-
-
-HDIO_SET_ADDRESS
-	change lba addressing modes
-
-
-	usage::
-
-	  int val;
-
-	  ioctl(fd, HDIO_SET_ADDRESS, val);
-
-	inputs:
-		New value for addressing mode
-
-	    =   ===================
-	    0   28-bit
-	    1   48-bit
-	    2   48-bit doing 28-bit
-	    =   ===================
-
-	outputs:
-		none
-
-
-
-	error return:
-	  - EINVAL	Called on a partition instead of the whole disk device
-	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  - EINVAL	value out of range [0 2]
-	  - EBUSY		Controller busy
-	  - EIO		Drive does not support lba48 mode.
-
-
-HDIO_SET_IDE_SCSI
-	usage::
-
-
-	  long val;
-
-	  ioctl(fd, HDIO_SET_IDE_SCSI, val);
-
-	inputs:
-		New value for scsi emulation mode (?)
-
-
-
-	outputs:
-		none
-
-
-
-	error return:
-	  - EINVAL	Called on a partition instead of the whole disk device
-	  - EACCES	Access denied:  requires CAP_SYS_ADMIN
-	  - EINVAL	value out of range [0 1]
-	  - EBUSY	Controller busy
-
-
-
-HDIO_SET_SCSI_IDE
-	Not implemented, as of 2.6.8.1