summaryrefslogtreecommitdiff
path: root/Documentation/maintainer
diff options
context:
space:
mode:
authorTobin C. Harding <me@tobin.cc>2017-12-04 10:27:29 +1100
committerJonathan Corbet <corbet@lwn.net>2017-12-11 14:43:24 -0700
commit9727a0144bd99f4a189a2ededd52c53299079d8a (patch)
treec8fedac9b3888e0f145eb8dc6b1c968c29f33725 /Documentation/maintainer
parentb6e859f6cdd1686c021dcb3e18591d0b28ce8867 (diff)
downloadlwn-9727a0144bd99f4a189a2ededd52c53299079d8a.tar.gz
lwn-9727a0144bd99f4a189a2ededd52c53299079d8a.zip
doc: add maintainer book
There is currently very little documentation in the kernel on maintainer level tasks. In particular there are no documents on creating pull requests to submit to Linus. Quoting Greg Kroah-Hartman on LKML: Anyway, this actually came up at the kernel summit / maintainer meeting a few weeks ago, in that "how do I make a good pull request to Linus" is something we need to document. Here's what I do, and it seems to work well, so maybe we should turn it into the start of the documentation for how to do it. (quote references: kernel summit, Europe 2017) Create a new kernel documentation book 'how to be a maintainer' (suggested by Jonathan Corbet). Add chapters on 'configuring git' and 'creating a pull request'. Most of the content was written by Linus Torvalds and Greg Kroah-Hartman in discussion on LKML. This is stated at the start of one of the chapters and the original email thread is referenced in 'pull-requests.rst'. Signed-off-by: Tobin C. Harding <me@tobin.cc> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Diffstat (limited to 'Documentation/maintainer')
-rw-r--r--Documentation/maintainer/conf.py10
-rw-r--r--Documentation/maintainer/configure-git.rst34
-rw-r--r--Documentation/maintainer/index.rst10
-rw-r--r--Documentation/maintainer/pull-requests.rst178
4 files changed, 232 insertions, 0 deletions
diff --git a/Documentation/maintainer/conf.py b/Documentation/maintainer/conf.py
new file mode 100644
index 000000000000..81e9eb7a7884
--- /dev/null
+++ b/Documentation/maintainer/conf.py
@@ -0,0 +1,10 @@
+# -*- coding: utf-8; mode: python -*-
+
+project = 'Linux Kernel Development Documentation'
+
+tags.add("subproject")
+
+latex_documents = [
+ ('index', 'maintainer.tex', 'Linux Kernel Development Documentation',
+ 'The kernel development community', 'manual'),
+]
diff --git a/Documentation/maintainer/configure-git.rst b/Documentation/maintainer/configure-git.rst
new file mode 100644
index 000000000000..78bbbb0d2c84
--- /dev/null
+++ b/Documentation/maintainer/configure-git.rst
@@ -0,0 +1,34 @@
+.. _configuregit:
+
+Configure Git
+=============
+
+This chapter describes maintainer level git configuration.
+
+Tagged branches used in :ref:`Documentation/maintainer/pull-requests.rst
+<pullrequests>` should be signed with the developers public GPG key. Signed
+tags can be created by passing the ``-u`` flag to ``git tag``. However,
+since you would *usually* use the same key for the same project, you can
+set it once with
+::
+
+ git config user.signingkey "keyname"
+
+Alternatively, edit your ``.git/config`` or ``~/.gitconfig`` file by hand:
+::
+
+ [user]
+ name = Jane Developer
+ email = jd@domain.org
+ signingkey = jd@domain.org
+
+You may need to tell ``git`` to use ``gpg2``
+::
+
+ [gpg]
+ program = /path/to/gpg2
+
+You may also like to tell ``gpg`` which ``tty`` to use (add to your shell rc file)
+::
+
+ export GPG_TTY=$(tty)
diff --git a/Documentation/maintainer/index.rst b/Documentation/maintainer/index.rst
new file mode 100644
index 000000000000..fa84ac9cae39
--- /dev/null
+++ b/Documentation/maintainer/index.rst
@@ -0,0 +1,10 @@
+==========================
+Kernel Maintainer Handbook
+==========================
+
+.. toctree::
+ :maxdepth: 2
+
+ configure-git
+ pull-requests
+
diff --git a/Documentation/maintainer/pull-requests.rst b/Documentation/maintainer/pull-requests.rst
new file mode 100644
index 000000000000..a19db3458b56
--- /dev/null
+++ b/Documentation/maintainer/pull-requests.rst
@@ -0,0 +1,178 @@
+.. _pullrequests:
+
+Creating Pull Requests
+======================
+
+This chapter describes how maintainers can create and submit pull requests
+to other maintainers. This is useful for transferring changes from one
+maintainers tree to another maintainers tree.
+
+This document was written by Tobin C. Harding (who at that time, was not an
+experienced maintainer) primarily from comments made by Greg Kroah-Hartman
+and Linus Torvalds on LKML. Suggestions and fixes by Jonathan Corbet and
+Mauro Carvalho Chehab. Misrepresentation was unintentional but inevitable,
+please direct abuse to Tobin C. Harding <me@tobin.cc>.
+
+Original email thread::
+
+ http://lkml.kernel.org/r/20171114110500.GA21175@kroah.com
+
+
+Create Branch
+-------------
+
+To start with you will need to have all the changes you wish to include in
+the pull request on a separate branch. Typically you will base this branch
+off of a branch in the developers tree whom you intend to send the pull
+request to.
+
+In order to create the pull request you must first tag the branch that you
+have just created. It is recommended that you choose a meaningful tag name,
+in a way that you and others can understand, even after some time. A good
+practice is to include in the name an indicator of the sybsystem of origin
+and the target kernel version.
+
+Greg offers the following. A pull request with miscellaneous stuff for
+drivers/char, to be applied at the Kernel version 4.15-rc1 could be named
+as ``char-misc-4.15-rc1``. If such tag would be produced from a branch
+named ``char-misc-next``, you would be using the following command::
+
+ git tag -s char-misc-4.15-rc1 char-misc-next
+
+that will create a signed tag called ``char-misc-4.15-rc1`` based on the
+last commit in the ``char-misc-next`` branch, and sign it with your gpg key
+(see :ref:`Documentation/maintainer/configure_git.rst <configuregit>`).
+
+Linus will only accept pull requests based on a signed tag. Other
+maintainers may differ.
+
+When you run the above command ``git`` will drop you into an editor and ask
+you to describe the tag. In this case, you are describing a pull request,
+so outline what is contained here, why it should be merged, and what, if
+any, testing has been done. All of this information will end up in the tag
+itself, and then in the merge commit that the maintainer makes if/when they
+merge the pull request. So write it up well, as it will be in the kernel
+tree for forever.
+
+As said by Linus::
+
+ Anyway, at least to me, the important part is the *message*. I want
+ to understand what I'm pulling, and why I should pull it. I also
+ want to use that message as the message for the merge, so it should
+ not just make sense to me, but make sense as a historical record
+ too.
+
+ Note that if there is something odd about the pull request, that
+ should very much be in the explanation. If you're touching files
+ that you don't maintain, explain _why_. I will see it in the
+ diffstat anyway, and if you didn't mention it, I'll just be extra
+ suspicious. And when you send me new stuff after the merge window
+ (or even bug-fixes, but ones that look scary), explain not just
+ what they do and why they do it, but explain the _timing_. What
+ happened that this didn't go through the merge window..
+
+ I will take both what you write in the email pull request _and_ in
+ the signed tag, so depending on your workflow, you can either
+ describe your work in the signed tag (which will also automatically
+ make it into the pull request email), or you can make the signed
+ tag just a placeholder with nothing interesting in it, and describe
+ the work later when you actually send me the pull request.
+
+ And yes, I will edit the message. Partly because I tend to do just
+ trivial formatting (the whole indentation and quoting etc), but
+ partly because part of the message may make sense for me at pull
+ time (describing the conflicts and your personal issues for sending
+ it right now), but may not make sense in the context of a merge
+ commit message, so I will try to make it all make sense. I will
+ also fix any speeling mistaeks and bad grammar I notice,
+ particularly for non-native speakers (but also for native ones
+ ;^). But I may miss some, or even add some.
+
+ Linus
+
+Greg gives, as an example pull request::
+
+ Char/Misc patches for 4.15-rc1
+
+ Here is the big char/misc patch set for the 4.15-rc1 merge window.
+ Contained in here is the normal set of new functions added to all
+ of these crazy drivers, as well as the following brand new
+ subsystems:
+ - time_travel_controller: Finally a set of drivers for the
+ latest time travel bus architecture that provides i/o to
+ the CPU before it asked for it, allowing uninterrupted
+ processing
+ - relativity_shifters: due to the affect that the
+ time_travel_controllers have on the overall system, there
+ was a need for a new set of relativity shifter drivers to
+ accommodate the newly formed black holes that would
+ threaten to suck CPUs into them. This subsystem handles
+ this in a way to successfully neutralize the problems.
+ There is a Kconfig option to force these to be enabled
+ when needed, so problems should not occur.
+
+ All of these patches have been successfully tested in the latest
+ linux-next releases, and the original problems that it found have
+ all been resolved (apologies to anyone living near Canberra for the
+ lack of the Kconfig options in the earlier versions of the
+ linux-next tree creations.)
+
+ Signed-off-by: Your-name-here <your_email@domain>
+
+
+The tag message format is just like a git commit id. One line at the top
+for a "summary subject" and be sure to sign-off at the bottom.
+
+Now that you have a local signed tag, you need to push it up to where it
+can be retrieved::
+
+ git push origin char-misc-4.15-rc1
+
+
+Create Pull Request
+-------------------
+
+The last thing to do is create the pull request message. ``git`` handily
+will do this for you with the ``git request-pull`` command, but it needs a
+bit of help determining what you want to pull, and on what to base the pull
+against (to show the correct changes to be pulled and the diffstat). The
+following command(s) will generate a pull request::
+
+ git request-pull master git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git/ char-misc-4.15-rc1
+
+Quoting Greg::
+
+ This is asking git to compare the difference from the
+ 'char-misc-4.15-rc1' tag location, to the head of the 'master'
+ branch (which in my case points to the last location in Linus's
+ tree that I diverged from, usually a -rc release) and to use the
+ git:// protocol to pull from. If you wish to use https://, that
+ can be used here instead as well (but note that some people behind
+ firewalls will have problems with https git pulls).
+
+ If the char-misc-4.15-rc1 tag is not present in the repo that I am
+ asking to be pulled from, git will complain saying it is not there,
+ a handy way to remember to actually push it to a public location.
+
+ The output of 'git request-pull' will contain the location of the
+ git tree and specific tag to pull from, and the full text
+ description of that tag (which is why you need to provide good
+ information in that tag). It will also create a diffstat of the
+ pull request, and a shortlog of the individual commits that the
+ pull request will provide.
+
+Linus responded that he tends to prefer the ``git://`` protocol. Other
+maintainers may have different preferences. Also, note that if you are
+creating pull requests without a signed tag then ``https://`` may be a
+better choice. Please see the original thread for the full discussion.
+
+
+Submit Pull Request
+-------------------
+
+A pull request is submitted in the same way as an ordinary patch. Send as
+inline email to the maintainer and CC LKML and any sub-system specific
+lists if required. Pull requests to Linus typically have a subject line
+something like::
+
+ [GIT PULL] <subsystem> changes for v4.15-rc1