Merge tag 'mfd-3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next

Pull MFD update from Samuel Ortiz:
 "For 3.10 we have a few new MFD drivers for:

   - The ChromeOS embedded controller which provides keyboard, battery
     and power management services.  This controller is accessible
     through i2c or SPI.

   - Silicon Laboratories 476x controller, providing access to their FM
     chipset and their audio codec.

   - Realtek's RTS5249, a memory stick, MMC and SD/SDIO PCI based
     reader.

   - Nokia's Tahvo power button and watchdog device.  This device is
     very similar to Retu and is thus supported by the same code base.

   - STMicroelectronics STMPE1801, a keyboard and GPIO controller
     supported by the stmpe driver.

   - ST-Ericsson AB8540 and AB8505 power management and voltage
     converter controllers through the existing ab8500 code.

  Some other drivers got cleaned up or improved.  In particular:

   - The Linaro/STE guys got the ab8500 driver in sync with their
     internal code through a series of optimizations, fixes and
     improvements.

   - The AS3711 and OMAP USB drivers now have DT support.

   - The arizona clock and interrupt handling code got improved.

   - The wm5102 register patch and boot mechanism also got improved."

* tag 'mfd-3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next: (104 commits)
  mfd: si476x: Don't use 0bNNN
  mfd: vexpress: Handle pending config transactions
  mfd: ab8500: Export ab8500_gpadc_sw_hw_convert properly
  mfd: si476x: Fix i2c warning
  mfd: si476x: Add header files and Kbuild plumbing
  mfd: si476x: Add chip properties handling code
  mfd: si476x: Add the bulk of the core driver
  mfd: si476x: Add commands abstraction layer
  mfd: rtsx: Support RTS5249
  mfd: retu: Add Tahvo support
  mfd: ucb1400: Pass ucb1400-gpio data through ac97 bus
  mfd: wm8994: Add some OF properties
  mfd: wm8994: Add device ID data to WM8994 OF device IDs
  input: Export matrix_keypad_parse_of_params()
  mfd: tps65090: Add compatible string for charger subnode
  mfd: db8500-prcmu: Support platform dependant device selection
  mfd: syscon: Fix warnings when printing resource_size_t
  of: Add stub of_get_parent for non-OF builds
  mfd: omap-usb-tll: Convert to devm_ioremap_resource()
  mfd: omap-usb-host: Convert to devm_ioremap_resource()
  ...

6 files changed, 355 insertions, 1 deletions

diff --git a/Documentation/devicetree/bindings/input/cros-ec-keyb.txt b/Documentation/devicetree/bindings/input/cros-ec-keyb.txt
new file mode 100644
index 000000000000..0f6355ce39b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/cros-ec-keyb.txt
@@ -0,0 +1,72 @@
+ChromeOS EC Keyboard
+
+Google's ChromeOS EC Keyboard is a simple matrix keyboard implemented on
+a separate EC (Embedded Controller) device. It provides a message for reading
+key scans from the EC. These are then converted into keycodes for processing
+by the kernel.
+
+This binding is based on matrix-keymap.txt and extends/modifies it as follows:
+
+Required properties:
+- compatible: "google,cros-ec-keyb"
+
+Optional properties:
+- google,needs-ghost-filter: True to enable a ghost filter for the matrix
+keyboard. This is recommended if the EC does not have its own logic or
+hardware for this.
+
+
+Example:
+
+cros-ec-keyb {
+	compatible = "google,cros-ec-keyb";
+	keypad,num-rows = <8>;
+	keypad,num-columns = <13>;
+	google,needs-ghost-filter;
+	/*
+	 * Keymap entries take the form of 0xRRCCKKKK where
+	 * RR=Row CC=Column KKKK=Key Code
+	 * The values below are for a US keyboard layout and
+	 * are taken from the Linux driver. Note that the
+	 * 102ND key is not used for US keyboards.
+	 */
+	linux,keymap = <
+		/* CAPSLCK F1         B          F10     */
+		0x0001003a 0x0002003b 0x00030030 0x00040044
+		/* N       =          R_ALT      ESC     */
+		0x00060031 0x0008000d 0x000a0064 0x01010001
+		/* F4      G          F7         H       */
+		0x0102003e 0x01030022 0x01040041 0x01060023
+		/* '       F9         BKSPACE    L_CTRL  */
+		0x01080028 0x01090043 0x010b000e 0x0200001d
+		/* TAB     F3         T          F6      */
+		0x0201000f 0x0202003d 0x02030014 0x02040040
+		/* ]       Y          102ND      [       */
+		0x0205001b 0x02060015 0x02070056 0x0208001a
+		/* F8      GRAVE      F2         5       */
+		0x02090042 0x03010029 0x0302003c 0x03030006
+		/* F5      6          -          \       */
+		0x0304003f 0x03060007 0x0308000c 0x030b002b
+		/* R_CTRL  A          D          F       */
+		0x04000061 0x0401001e 0x04020020 0x04030021
+		/* S       K          J          ;       */
+		0x0404001f 0x04050025 0x04060024 0x04080027
+		/* L       ENTER      Z          C       */
+		0x04090026 0x040b001c 0x0501002c 0x0502002e
+		/* V       X          ,          M       */
+		0x0503002f 0x0504002d 0x05050033 0x05060032
+		/* L_SHIFT /          .          SPACE   */
+		0x0507002a 0x05080035 0x05090034 0x050B0039
+		/* 1       3          4          2       */
+		0x06010002 0x06020004 0x06030005 0x06040003
+		/* 8       7          0          9       */
+		0x06050009 0x06060008 0x0608000b 0x0609000a
+		/* L_ALT   DOWN       RIGHT      Q       */
+		0x060a0038 0x060b006c 0x060c006a 0x07010010
+		/* E       R          W          I       */
+		0x07020012 0x07030013 0x07040011 0x07050017
+		/* U       R_SHIFT    P          O       */
+		0x07060016 0x07070036 0x07080019 0x07090018
+		/* UP      LEFT    */
+		0x070b0067 0x070c0069>;
+};
diff --git a/Documentation/devicetree/bindings/mfd/as3711.txt b/Documentation/devicetree/bindings/mfd/as3711.txt
new file mode 100644
index 000000000000..d98cf18c721c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/as3711.txt
@@ -0,0 +1,73 @@
+AS3711 is an I2C PMIC from Austria MicroSystems with multiple DCDC and LDO power
+supplies, a battery charger and an RTC. So far only bindings for the two stepup
+DCDC converters are defined. Other DCDC and LDO supplies are configured, using
+standard regulator properties, they must belong to a sub-node, called
+"regulators" and be called "sd1" to "sd4" and "ldo1" to "ldo8." Stepup converter
+configuration should be placed in a subnode, called "backlight."
+
+Compulsory properties:
+- compatible		: must be "ams,as3711"
+- reg			: specifies the I2C address
+
+To use the SU1 converter as a backlight source the following two properties must
+be provided:
+- su1-dev		: framebuffer phandle
+- su1-max-uA		: maximum current
+
+To use the SU2 converter as a backlight source the following two properties must
+be provided:
+- su2-dev		: framebuffer phandle
+- su1-max-uA		: maximum current
+
+Additionally one of these properties must be provided to select the type of
+feedback used:
+- su2-feedback-voltage	: voltage feedback is used
+- su2-feedback-curr1	: CURR1 input used for current feedback
+- su2-feedback-curr2	: CURR2 input used for current feedback
+- su2-feedback-curr3	: CURR3 input used for current feedback
+- su2-feedback-curr-auto: automatic current feedback selection
+
+and one of these to select the over-voltage protection pin
+- su2-fbprot-lx-sd4	: LX_SD4 is used for over-voltage protection
+- su2-fbprot-gpio2	: GPIO2 is used for over-voltage protection
+- su2-fbprot-gpio3	: GPIO3 is used for over-voltage protection
+- su2-fbprot-gpio4	: GPIO4 is used for over-voltage protection
+
+If "su2-feedback-curr-auto" is selected, one or more of the following properties
+have to be specified:
+- su2-auto-curr1	: use CURR1 input for current feedback
+- su2-auto-curr2	: use CURR2 input for current feedback
+- su2-auto-curr3	: use CURR3 input for current feedback
+
+Example:
+
+as3711@40 {
+	compatible = "ams,as3711";
+	reg = <0x40>;
+
+	regulators {
+		sd4 {
+			regulator-name = "1.215V";
+			regulator-min-microvolt = <1215000>;
+			regulator-max-microvolt = <1235000>;
+		};
+		ldo2 {
+			regulator-name = "2.8V CPU";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+
+	backlight {
+		compatible = "ams,as3711-bl";
+		su2-dev = <&lcdc>;
+		su2-max-uA = <36000>;
+		su2-feedback-curr-auto;
+		su2-fbprot-gpio4;
+		su2-auto-curr1;
+		su2-auto-curr2;
+		su2-auto-curr3;
+	};
+};
diff --git a/Documentation/devicetree/bindings/mfd/cros-ec.txt b/Documentation/devicetree/bindings/mfd/cros-ec.txt
new file mode 100644
index 000000000000..e0e59c58a1f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/cros-ec.txt
@@ -0,0 +1,56 @@
+ChromeOS Embedded Controller
+
+Google's ChromeOS EC is a Cortex-M device which talks to the AP and
+implements various function such as keyboard and battery charging.
+
+The EC can be connect through various means (I2C, SPI, LPC) and the
+compatible string used depends on the inteface. Each connection method has
+its own driver which connects to the top level interface-agnostic EC driver.
+Other Linux driver (such as cros-ec-keyb for the matrix keyboard) connect to
+the top-level driver.
+
+Required properties (I2C):
+- compatible: "google,cros-ec-i2c"
+- reg: I2C slave address
+
+Required properties (SPI):
+- compatible: "google,cros-ec-spi"
+- reg: SPI chip select
+
+Required properties (LPC):
+- compatible: "google,cros-ec-lpc"
+- reg: List of (IO address, size) pairs defining the interface uses
+
+
+Example for I2C:
+
+i2c@12CA0000 {
+	cros-ec@1e {
+		reg = <0x1e>;
+		compatible = "google,cros-ec-i2c";
+		interrupts = <14 0>;
+		interrupt-parent = <&wakeup_eint>;
+		wakeup-source;
+	};
+
+
+Example for SPI:
+
+spi@131b0000 {
+	ec@0 {
+		compatible = "google,cros-ec-spi";
+		reg = <0x0>;
+		interrupts = <14 0>;
+		interrupt-parent = <&wakeup_eint>;
+		wakeup-source;
+		spi-max-frequency = <5000000>;
+		controller-data {
+		cs-gpio = <&gpf0 3 4 3 0>;
+		samsung,spi-cs;
+		samsung,spi-feedback-delay = <2>;
+		};
+	};
+};
+
+
+Example for LPC is not supplied as it is not yet implemented.
diff --git a/Documentation/devicetree/bindings/mfd/omap-usb-host.txt b/Documentation/devicetree/bindings/mfd/omap-usb-host.txt
new file mode 100644
index 000000000000..b381fa696bf9
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/omap-usb-host.txt
@@ -0,0 +1,80 @@
+OMAP HS USB Host
+
+Required properties:
+
+- compatible: should be "ti,usbhs-host"
+- reg: should contain one register range i.e. start and length
+- ti,hwmods: must contain "usb_host_hs"
+
+Optional properties:
+
+- num-ports: number of USB ports. Usually this is automatically detected
+  from the IP's revision register but can be overridden by specifying
+  this property. A maximum of 3 ports are supported at the moment.
+
+- portN-mode: String specifying the port mode for port N, where N can be
+  from 1 to 3. If the port mode is not specified, that port is treated
+  as unused. When specified, it must be one of the following.
+	"ehci-phy",
+        "ehci-tll",
+        "ehci-hsic",
+        "ohci-phy-6pin-datse0",
+        "ohci-phy-6pin-dpdm",
+        "ohci-phy-3pin-datse0",
+        "ohci-phy-4pin-dpdm",
+        "ohci-tll-6pin-datse0",
+        "ohci-tll-6pin-dpdm",
+        "ohci-tll-3pin-datse0",
+        "ohci-tll-4pin-dpdm",
+        "ohci-tll-2pin-datse0",
+        "ohci-tll-2pin-dpdm",
+
+- single-ulpi-bypass: Must be present if the controller contains a single
+  ULPI bypass control bit. e.g. OMAP3 silicon <= ES2.1
+
+Required properties if child node exists:
+
+- #address-cells: Must be 1
+- #size-cells: Must be 1
+- ranges: must be present
+
+Properties for children:
+
+The OMAP HS USB Host subsystem contains EHCI and OHCI controllers.
+See Documentation/devicetree/bindings/usb/omap-ehci.txt and
+omap3-ohci.txt
+
+Example for OMAP4:
+
+usbhshost: usbhshost@4a064000 {
+	compatible = "ti,usbhs-host";
+	reg = <0x4a064000 0x800>;
+	ti,hwmods = "usb_host_hs";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+
+	usbhsohci: ohci@4a064800 {
+		compatible = "ti,ohci-omap3", "usb-ohci";
+		reg = <0x4a064800 0x400>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 76 0x4>;
+	};
+
+	usbhsehci: ehci@4a064c00 {
+		compatible = "ti,ehci-omap", "usb-ehci";
+		reg = <0x4a064c00 0x400>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 77 0x4>;
+	};
+};
+
+&usbhshost {
+	port1-mode = "ehci-phy";
+	port2-mode = "ehci-tll";
+	port3-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <&hsusb1_phy 0 &hsusb3_phy>;
+};
diff --git a/Documentation/devicetree/bindings/mfd/omap-usb-tll.txt b/Documentation/devicetree/bindings/mfd/omap-usb-tll.txt
new file mode 100644
index 000000000000..62fe69724e3b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/omap-usb-tll.txt
@@ -0,0 +1,17 @@
+OMAP HS USB Host TLL (Transceiver-Less Interface)
+
+Required properties:
+
+- compatible : should be "ti,usbhs-tll"
+- reg : should contain one register range i.e. start and length
+- interrupts : should contain the TLL module's interrupt
+- ti,hwmod : must contain "usb_tll_hs"
+
+Example:
+
+	usbhstll: usbhstll@4a062000 {
+		compatible = "ti,usbhs-tll";
+		reg = <0x4a062000 0x1000>;
+		interrupts = <78>;
+		ti,hwmods = "usb_tll_hs";
+	  };
diff --git a/Documentation/devicetree/bindings/sound/wm8994.txt b/Documentation/devicetree/bindings/sound/wm8994.txt
index 7a7eb1e7bda6..f2f3e80934d2 100644
--- a/Documentation/devicetree/bindings/sound/wm8994.txt
+++ b/Documentation/devicetree/bindings/sound/wm8994.txt
@@ -5,14 +5,70 @@ on the board).
 
 Required properties:
 
-  - compatible : "wlf,wm1811", "wlf,wm8994", "wlf,wm8958"
+  - compatible : One of "wlf,wm1811", "wlf,wm8994" or "wlf,wm8958".
 
   - reg : the I2C address of the device for I2C, the chip select
           number for SPI.
 
+  - gpio-controller : Indicates this device is a GPIO controller.
+  - #gpio-cells : Must be 2. The first cell is the pin number and the
+    second cell is used to specify optional parameters (currently unused).
+
+  - AVDD2-supply, DBVDD1-supply, DBVDD2-supply, DBVDD3-supply, CPVDD-supply,
+    SPKVDD1-supply, SPKVDD2-supply : power supplies for the device, as covered
+    in Documentation/devicetree/bindings/regulator/regulator.txt
+
+Optional properties:
+
+  - interrupts : The interrupt line the IRQ signal for the device is
+    connected to.  This is optional, if it is not connected then none
+    of the interrupt related properties should be specified.
+  - interrupt-controller : These devices contain interrupt controllers
+    and may provide interrupt services to other devices if they have an
+    interrupt line connected.
+  - interrupt-parent : The parent interrupt controller.
+  - #interrupt-cells: the number of cells to describe an IRQ, this should be 2.
+    The first cell is the IRQ number.
+    The second cell is the flags, encoded as the trigger masks from
+    Documentation/devicetree/bindings/interrupts.txt
+
+  - wlf,gpio-cfg : A list of GPIO configuration register values. If absent,
+    no configuration of these registers is performed. If any value is
+    over 0xffff then the register will be left as default. If present 11
+    values must be supplied.
+
+  - wlf,micbias-cfg : Two MICBIAS register values for WM1811 or
+    WM8958.  If absent the register defaults will be used.
+
+  - wlf,ldo1ena : GPIO specifier for control of LDO1ENA input to device.
+  - wlf,ldo2ena : GPIO specifier for control of LDO2ENA input to device.
+
+  - wlf,lineout1-se : If present LINEOUT1 is in single ended mode.
+  - wlf,lineout2-se : If present LINEOUT2 is in single ended mode.
+
+  - wlf,lineout1-feedback : If present LINEOUT1 has common mode feedback
+    connected.
+  - wlf,lineout2-feedback : If present LINEOUT2 has common mode feedback
+    connected.
+
+  - wlf,ldoena-always-driven : If present LDOENA is always driven.
+
 Example:
 
 codec: wm8994@1a {
 	compatible = "wlf,wm8994";
 	reg = <0x1a>;
+
+	gpio-controller;
+	#gpio-cells = <2>;
+
+	lineout1-se;
+
+	AVDD2-supply = <&regulator>;
+	CPVDD-supply = <&regulator>;
+	DBVDD1-supply = <&regulator>;
+	DBVDD2-supply = <&regulator>;
+	DBVDD3-supply = <&regulator>;
+	SPKVDD1-supply = <&regulator>;
+	SPKVDD2-supply = <&regulator>;
 };