Merge tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/Thunderbolt updates from Greg KH:
 "Here is the "big" set of USB and Thunderbolt changes for 6.7-rc1.
  Nothing really major in here, just lots of constant development for
  new hardware. Included in here are:

   - Thunderbolt (i.e. USB4) fixes for reported issues and support for
     new hardware types and devices

   - USB typec additions of new drivers and cleanups for some existing
     ones

   - xhci cleanups and expanded tracing support and some platform
     specific updates

   - USB "La Jolla Cove Adapter (LJCA)" support added, and the gpio,
     spi, and i2c drivers for that type of device (all acked by the
     respective subsystem maintainers.)

   - lots of USB gadget driver updates and cleanups

   - new USB dwc3 platforms supported, as well as other dwc3 fixes and
     cleanups

   - USB chipidea driver updates

   - other smaller driver cleanups and additions, full details in the
     shortlog

  All of these have been in the linux-next tree for a while with no
  reported problems"

* tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits)
  usb: gadget: uvc: Add missing initialization of ssp config descriptor
  usb: storage: set 1.50 as the lower bcdDevice for older "Super Top" compatibility
  usb: raw-gadget: report suspend, resume, reset, and disconnect events
  usb: raw-gadget: don't disable device if usb_ep_queue fails
  usb: raw-gadget: properly handle interrupted requests
  usb:cdnsp: remove TRB_FLUSH_ENDPOINT command
  usb: gadget: aspeed_udc: Convert to platform remove callback returning void
  dt-bindings: usb: fsa4480: Add compatible for OCP96011
  usb: typec: fsa4480: Add support to swap SBU orientation
  dt-bindings: usb: fsa4480: Add data-lanes property to endpoint
  usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm()
  Revert "dt-bindings: usb: Add bindings for multiport properties on DWC3 controller"
  Revert "dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport"
  thunderbolt: Fix one kernel-doc comment
  usb: gadget: f_ncm: Always set current gadget in ncm_bind()
  usb: core: Remove duplicated check in usb_hub_create_port_device
  usb: typec: tcpm: Add additional checks for contaminant
  arm64: dts: rockchip: rk3588s: Add USB3 host controller
  usb: dwc3: add optional PHY interface clocks
  dt-bindings: usb: add rk3588 compatible to rockchip,dwc3
  ...

14 files changed, 449 insertions, 13 deletions

diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
index f99fbbcd68fb..d58dd744d5d2 100644
--- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
@@ -20,6 +20,7 @@ properties:
       - qcom,qcm2290-qmp-usb3-phy
       - qcom,sa8775p-qmp-usb3-uni-phy
       - qcom,sc8280xp-qmp-usb3-uni-phy
+      - qcom,sdx75-qmp-usb3-uni-phy
       - qcom,sm6115-qmp-usb3-phy
 
   reg:
@@ -75,6 +76,7 @@ allOf:
           contains:
             enum:
               - qcom,ipq9574-qmp-usb3-phy
+              - qcom,sdx75-qmp-usb3-uni-phy
     then:
       properties:
         clock-names:
diff --git a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml
index c53bab107b6d..c95828607ab6 100644
--- a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml
@@ -14,7 +14,12 @@ description:
 
 properties:
   compatible:
-    const: qcom,sm8550-snps-eusb2-phy
+    oneOf:
+      - items:
+          - enum:
+              - qcom,sdx75-snps-eusb2-phy
+          - const: qcom,sm8550-snps-eusb2-phy
+      - const: qcom,sm8550-snps-eusb2-phy
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml
index bceb479f74c5..422921cf1f82 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml
@@ -35,6 +35,12 @@ properties:
   '#size-cells':
     const: 0
 
+  orientation-gpios:
+    description: Array of input gpios for the Type-C connector orientation indication.
+      The GPIO indication is used to detect the orientation of the Type-C connector.
+      The array should contain a gpio entry for each PMIC Glink connector, in reg order.
+      It is defined that GPIO active level means "CC2" or Reversed/Flipped orientation.
+
 patternProperties:
   '^connector@\d$':
     $ref: /schemas/connector/usb-connector.yaml#
@@ -44,6 +50,19 @@ patternProperties:
 required:
   - compatible
 
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - qcom,sm8450-pmic-glink
+                - qcom,sm8550-pmic-glink
+    then:
+      properties:
+        orientation-gpios: false
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml
index 1394557517b1..b7e664f7395b 100644
--- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml
+++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml
@@ -15,7 +15,9 @@ properties:
     oneOf:
       - enum:
           - chipidea,usb2
+          - fsl,imx27-usb
           - lsi,zevio-usb
+          - nuvoton,npcm750-udc
           - nvidia,tegra20-ehci
           - nvidia,tegra20-udc
           - nvidia,tegra30-ehci
@@ -66,6 +68,10 @@ properties:
       - items:
           - const: xlnx,zynq-usb-2.20a
           - const: chipidea,usb2
+      - items:
+          - enum:
+              - nuvoton,npcm845-udc
+          - const: nuvoton,npcm750-udc
 
   reg:
     minItems: 1
@@ -388,6 +394,7 @@ allOf:
             enum:
               - chipidea,usb2
               - lsi,zevio-usb
+              - nuvoton,npcm750-udc
               - nvidia,tegra20-udc
               - nvidia,tegra30-udc
               - nvidia,tegra114-udc
diff --git a/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml b/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml
index f6e7a5c1ff0b..f9410eb76a62 100644
--- a/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml
+++ b/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml
@@ -11,8 +11,12 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - fcs,fsa4480
+    oneOf:
+      - const: fcs,fsa4480
+      - items:
+          - enum:
+              - ocs,ocp96011
+          - const: fcs,fsa4480
 
   reg:
     maxItems: 1
@@ -32,10 +36,43 @@ properties:
     type: boolean
 
   port:
-    $ref: /schemas/graph.yaml#/properties/port
+    $ref: /schemas/graph.yaml#/$defs/port-base
     description:
       A port node to link the FSA4480 to a TypeC controller for the purpose of
       handling altmode muxing and orientation switching.
+    unevaluatedProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/graph.yaml#/$defs/endpoint-base
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            $ref: /schemas/types.yaml#/definitions/uint32-array
+            description:
+              Specifies how the AUX+/- lines are connected to SBU1/2.
+            oneOf:
+              - items:
+                  - const: 0
+                  - const: 1
+                description: |
+                  Default AUX/SBU layout (FSA4480)
+                  - AUX+ connected to SBU2
+                  - AUX- connected to SBU1
+                  Default AUX/SBU layout (OCP96011)
+                  - AUX+ connected to SBU1
+                  - AUX- connected to SBU2
+              - items:
+                  - const: 1
+                  - const: 0
+                description: |
+                  Swapped AUX/SBU layout (FSA4480)
+                  - AUX+ connected to SBU1
+                  - AUX- connected to SBU2
+                  Swapped AUX/SBU layout (OCP96011)
+                  - AUX+ connected to SBU2
+                  - AUX- connected to SBU1
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
index d0927f6768a4..ee08b9c3721f 100644
--- a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
+++ b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/usb/genesys,gl850g.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Genesys Logic GL850G USB 2.0 hub controller
+title: Genesys Logic USB hub controller
 
 maintainers:
   - Icenowy Zheng <uwu@icenowy.me>
@@ -18,6 +18,7 @@ properties:
       - usb5e3,608
       - usb5e3,610
       - usb5e3,620
+      - usb5e3,626
 
   reg: true
 
diff --git a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml
index f196beb826d8..d3b2b666ec2a 100644
--- a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml
+++ b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml
@@ -19,6 +19,7 @@ properties:
   compatible:
     items:
       - enum:
+          - nxp,cbdtu02043
           - onnn,fsusb43l10x
           - pericom,pi3usb102
       - const: gpio-sbu-mux
@@ -50,7 +51,6 @@ required:
   - compatible
   - enable-gpios
   - select-gpios
-  - mode-switch
   - orientation-switch
   - port
 
diff --git a/Documentation/devicetree/bindings/usb/nxp,ptn36502.yaml b/Documentation/devicetree/bindings/usb/nxp,ptn36502.yaml
new file mode 100644
index 000000000000..eee548ac1abe
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/nxp,ptn36502.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/nxp,ptn36502.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PTN36502 Type-C USB 3.1 Gen 1 and DisplayPort v1.2 combo redriver
+
+maintainers:
+  - Luca Weiss <luca.weiss@fairphone.com>
+
+properties:
+  compatible:
+    enum:
+      - nxp,ptn36502
+
+  reg:
+    maxItems: 1
+
+  vdd18-supply:
+    description: Power supply for VDD18 pin
+
+  retimer-switch:
+    description: Flag the port as possible handle of SuperSpeed signals retiming
+    type: boolean
+
+  orientation-switch:
+    description: Flag the port as possible handler of orientation switching
+    type: boolean
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Super Speed (SS) Output endpoint to the Type-C connector
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Super Speed (SS) Input endpoint from the Super-Speed PHY
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Sideband Use (SBU) AUX lines endpoint to the Type-C connector for the purpose of
+          handling altmode muxing and orientation switching.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        typec-mux@1a {
+            compatible = "nxp,ptn36502";
+            reg = <0x1a>;
+
+            vdd18-supply = <&usb_redrive_1v8>;
+
+            retimer-switch;
+            orientation-switch;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    usb_con_ss: endpoint {
+                        remote-endpoint = <&typec_con_ss>;
+                    };
+                };
+                port@1 {
+                    reg = <1>;
+                    phy_con_ss: endpoint {
+                        remote-endpoint = <&usb_phy_ss>;
+                    };
+                };
+                port@2 {
+                    reg = <2>;
+                    usb_con_sbu: endpoint {
+                        remote-endpoint = <&typec_dp_aux>;
+                    };
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
index 67591057f234..e889158ca205 100644
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
@@ -14,6 +14,7 @@ properties:
     items:
       - enum:
           - qcom,ipq4019-dwc3
+          - qcom,ipq5018-dwc3
           - qcom,ipq5332-dwc3
           - qcom,ipq6018-dwc3
           - qcom,ipq8064-dwc3
@@ -34,6 +35,7 @@ properties:
           - qcom,sdm845-dwc3
           - qcom,sdx55-dwc3
           - qcom,sdx65-dwc3
+          - qcom,sdx75-dwc3
           - qcom,sm4250-dwc3
           - qcom,sm6115-dwc3
           - qcom,sm6125-dwc3
@@ -180,6 +182,8 @@ allOf:
               - qcom,sdm670-dwc3
               - qcom,sdm845-dwc3
               - qcom,sdx55-dwc3
+              - qcom,sdx65-dwc3
+              - qcom,sdx75-dwc3
               - qcom,sm6350-dwc3
     then:
       properties:
@@ -238,6 +242,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,ipq5018-dwc3
               - qcom,ipq5332-dwc3
               - qcom,msm8994-dwc3
               - qcom,qcs404-dwc3
@@ -363,6 +368,7 @@ allOf:
               - qcom,sdm845-dwc3
               - qcom,sdx55-dwc3
               - qcom,sdx65-dwc3
+              - qcom,sdx75-dwc3
               - qcom,sm4250-dwc3
               - qcom,sm6125-dwc3
               - qcom,sm6350-dwc3
@@ -411,6 +417,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,ipq5018-dwc3
               - qcom,ipq5332-dwc3
               - qcom,sdm660-dwc3
     then:
diff --git a/Documentation/devicetree/bindings/usb/realtek,rtd-dwc3.yaml b/Documentation/devicetree/bindings/usb/realtek,rtd-dwc3.yaml
new file mode 100644
index 000000000000..345d0132d4a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/realtek,rtd-dwc3.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2023 Realtek Semiconductor Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/realtek,rtd-dwc3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek DWC3 USB SoC Controller Glue
+
+maintainers:
+  - Stanley Chang <stanley_chang@realtek.com>
+
+description:
+  The Realtek DHC SoC embeds a DWC3 USB IP Core configured for USB 2.0
+  and USB 3.0 in host or dual-role mode.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - realtek,rtd1295-dwc3
+          - realtek,rtd1315e-dwc3
+          - realtek,rtd1319-dwc3
+          - realtek,rtd1319d-dwc3
+          - realtek,rtd1395-dwc3
+          - realtek,rtd1619-dwc3
+          - realtek,rtd1619b-dwc3
+      - const: realtek,rtd-dwc3
+
+  reg:
+    items:
+      - description: Address and length of register set for wrapper of dwc3 core.
+      - description: Address and length of register set for pm control.
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "^usb@[0-9a-f]+$":
+    $ref: snps,dwc3.yaml#
+    description: Required child node
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    usb@98013e00 {
+        compatible = "realtek,rtd1319d-dwc3", "realtek,rtd-dwc3";
+        reg = <0x98013e00 0x140>, <0x98013f60 0x4>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        usb@98050000 {
+            compatible = "snps,dwc3";
+            reg = <0x98050000 0x9000>;
+            interrupts = <0 94 4>;
+            phys = <&usb2phy &usb3phy>;
+            phy-names = "usb2-phy", "usb3-phy";
+            dr_mode = "otg";
+            usb-role-switch;
+            role-switch-default-mode = "host";
+            snps,dis_u2_susphy_quirk;
+            snps,parkmode-disable-ss-quirk;
+            snps,parkmode-disable-hs-quirk;
+            maximum-speed = "high-speed";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml b/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml
index c983dfe0f629..c4924113f9bd 100644
--- a/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml
@@ -20,9 +20,6 @@ description:
   Type-C PHY
   Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt
 
-allOf:
-  - $ref: snps,dwc3.yaml#
-
 select:
   properties:
     compatible:
@@ -30,6 +27,7 @@ select:
         enum:
           - rockchip,rk3328-dwc3
           - rockchip,rk3568-dwc3
+          - rockchip,rk3588-dwc3
   required:
     - compatible
 
@@ -39,6 +37,7 @@ properties:
       - enum:
           - rockchip,rk3328-dwc3
           - rockchip,rk3568-dwc3
+          - rockchip,rk3588-dwc3
       - const: snps,dwc3
 
   reg:
@@ -58,7 +57,9 @@ properties:
           Master/Core clock, must to be >= 62.5 MHz for SS
           operation and >= 30MHz for HS operation
       - description:
-          Controller grf clock
+          Controller grf clock OR UTMI clock
+      - description:
+          PIPE clock
 
   clock-names:
     minItems: 3
@@ -66,7 +67,10 @@ properties:
       - const: ref_clk
       - const: suspend_clk
       - const: bus_clk
-      - const: grf_clk
+      - enum:
+          - grf_clk
+          - utmi
+      - const: pipe
 
   power-domains:
     maxItems: 1
@@ -86,6 +90,52 @@ required:
   - clocks
   - clock-names
 
+allOf:
+  - $ref: snps,dwc3.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3328-dwc3
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 4
+        clock-names:
+          minItems: 3
+          items:
+            - const: ref_clk
+            - const: suspend_clk
+            - const: bus_clk
+            - const: grf_clk
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3568-dwc3
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          maxItems: 3
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3588-dwc3
+    then:
+      properties:
+        clock-names:
+          minItems: 3
+          items:
+            - const: ref_clk
+            - const: suspend_clk
+            - const: bus_clk
+            - const: utmi
+            - const: pipe
+
 examples:
   - |
     #include <dt-bindings/clock/rk3328-cru.h>
diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
index a696f23730d3..ee5af4b381b1 100644
--- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
@@ -310,6 +310,62 @@ properties:
     maximum: 62
     deprecated: true
 
+  snps,rx-thr-num-pkt:
+    description:
+      USB RX packet threshold count. In host mode, this field specifies
+      the space that must be available in the RX FIFO before the core can
+      start the corresponding USB RX transaction (burst).
+      In device mode, this field specifies the space that must be
+      available in the RX FIFO before the core can send ERDY for a
+      flow-controlled endpoint. It is only used for SuperSpeed.
+      The valid values for this field are from 1 to 15. (DWC3 SuperSpeed
+      USB 3.0 Controller Databook)
+    $ref: /schemas/types.yaml#/definitions/uint8
+    minimum: 1
+    maximum: 15
+
+  snps,rx-max-burst:
+    description:
+      Max USB RX burst size. In host mode, this field specifies the
+      Maximum Bulk IN burst the DWC_usb3 core can perform. When the system
+      bus is slower than the USB, RX FIFO can overrun during a long burst.
+      You can program a smaller value to this field to limit the RX burst
+      size that the core can perform. It only applies to SS Bulk,
+      Isochronous, and Interrupt IN endpoints in the host mode.
+      In device mode, this field specifies the NUMP value that is sent in
+      ERDY for an OUT endpoint.
+      The valid values for this field are from 1 to 16. (DWC3 SuperSpeed
+      USB 3.0 Controller Databook)
+    $ref: /schemas/types.yaml#/definitions/uint8
+    minimum: 1
+    maximum: 16
+
+  snps,tx-thr-num-pkt:
+    description:
+      USB TX packet threshold count. This field specifies the number of
+      packets that must be in the TXFIFO before the core can start
+      transmission for the corresponding USB transaction (burst).
+      This count is valid in both host and device modes. It is only used
+      for SuperSpeed operation.
+      Valid values are from 1 to 15. (DWC3 SuperSpeed USB 3.0 Controller
+      Databook)
+    $ref: /schemas/types.yaml#/definitions/uint8
+    minimum: 1
+    maximum: 15
+
+  snps,tx-max-burst:
+    description:
+      Max USB TX burst size. When the system bus is slower than the USB,
+      TX FIFO can underrun during a long burst. Program a smaller value
+      to this field to limit the TX burst size that the core can execute.
+      In Host mode, it only applies to SS Bulk, Isochronous, and Interrupt
+      OUT endpoints. This value is not used in device mode.
+      Valid values are from 1 to 16. (DWC3 SuperSpeed USB 3.0 Controller
+      Databook)
+    $ref: /schemas/types.yaml#/definitions/uint8
+    minimum: 1
+    maximum: 16
+
   snps,rx-thr-num-pkt-prd:
     description:
       Periodic ESS RX packet threshold count (host mode only). Set this and
diff --git a/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml
index 6ab674dea4c6..323d664ae06a 100644
--- a/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml
+++ b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml
@@ -20,8 +20,23 @@ properties:
     enum:
       - ti,tps6598x
       - apple,cd321x
+      - ti,tps25750
+
   reg:
-    maxItems: 1
+    minItems: 1
+    items:
+      - description: main PD controller address
+      - description: |
+          I2C slave address field in PBMs input data
+          which is used as the device address when writing the
+          patch for TPS25750.
+          The patch address can be any value except 0x00, 0x20,
+          0x21, 0x22, and 0x23
+
+  reg-names:
+    items:
+      - const: main
+      - const: patch-address
 
   wakeup-source: true
 
@@ -35,10 +50,42 @@ properties:
   connector:
     $ref: /schemas/connector/usb-connector.yaml#
 
+  firmware-name:
+    description: |
+      Should contain the name of the default patch binary
+      file located on the firmware search path which is
+      used to switch the controller into APP mode.
+      This is used when tps25750 doesn't have an EEPROM
+      connected to it.
+    maxItems: 1
+
 required:
   - compatible
   - reg
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,tps25750
+    then:
+      properties:
+        reg:
+          maxItems: 2
+
+        connector:
+          required:
+            - data-role
+
+      required:
+        - connector
+        - reg-names
+    else:
+      properties:
+        reg:
+          maxItems: 1
+
 additionalProperties: false
 
 examples:
@@ -71,4 +118,36 @@ examples:
             };
         };
     };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        typec@21 {
+            compatible = "ti,tps25750";
+            reg = <0x21>, <0x0f>;
+            reg-names = "main", "patch-address";
+
+            interrupt-parent = <&msmgpio>;
+            interrupts = <100 IRQ_TYPE_LEVEL_LOW>;
+            interrupt-names = "irq";
+            firmware-name = "tps25750.bin";
+
+            pinctrl-names = "default";
+            pinctrl-0 = <&typec_pins>;
+
+            typec_con0: connector {
+                compatible = "usb-c-connector";
+                label = "USB-C";
+                data-role = "dual";
+                port {
+                    typec_ep0: endpoint {
+                        remote-endpoint = <&otg_ep>;
+                    };
+                };
+            };
+        };
+    };
 ...
diff --git a/Documentation/devicetree/bindings/usb/vialab,vl817.yaml b/Documentation/devicetree/bindings/usb/vialab,vl817.yaml
index 76db9071b352..c815010ba9c2 100644
--- a/Documentation/devicetree/bindings/usb/vialab,vl817.yaml
+++ b/Documentation/devicetree/bindings/usb/vialab,vl817.yaml
@@ -37,7 +37,6 @@ properties:
 required:
   - compatible
   - reg
-  - reset-gpios
   - vdd-supply
   - peer-hub