dt-bindings: Remove cases of 'allOf' containing a '$ref'

json-schema versions draft7 and earlier have a weird behavior in that
any keywords combined with a '$ref' are ignored (silently). The correct
form was to put a '$ref' under an 'allOf'. This behavior is now changed
in the 2019-09 json-schema spec and '$ref' can be mixed with other
keywords. The json-schema library doesn't yet support this, but the
tooling now does a fixup for this and either way works.

This has been a constant source of review comments, so let's change this
treewide so everyone copies the simpler syntax.

Scripted with ruamel.yaml with some manual fixups. Some minor whitespace
changes from the script.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de> # for I2C
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio
Reviewed-by: Stephen Boyd <sboyd@kernel.org> # clock
Signed-off-by: Rob Herring <robh@kernel.org>

2 files changed, 35 insertions, 45 deletions

diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
index c779a3c7d87a..256dd149698b 100644
--- a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
@@ -77,24 +77,21 @@ patternProperties:
         description:
           Specifies the type of PHY for which the group of PHY lanes is used.
           Refer include/dt-bindings/phy/phy.h. Constants from the header should be used.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [1, 2, 3, 4, 5, 6]
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [1, 2, 3, 4, 5, 6]
 
       cdns,num-lanes:
         description:
           Number of DisplayPort lanes.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [1, 2, 4]
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [1, 2, 4]
         default: 4
 
       cdns,max-bit-rate:
         description:
           Maximum DisplayPort link bit rate to use, in Mbps
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [2160, 2430, 2700, 3240, 4320, 5400, 8100]
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [2160, 2430, 2700, 3240, 4320, 5400, 8100]
         default: 8100
 
     required:
diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
index f8bd28ff31c1..b5a6195de7ff 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
@@ -83,31 +83,28 @@ then:
         It is a 6 bit value that specifies offset to be
         added to PHY refgen RESCODE via IMP_CTRL1 register. It is a PHY
         tuning parameter that may vary for different boards of same SOC.
-      allOf:
-        - $ref: /schemas/types.yaml#/definitions/uint32
-        - minimum: 0
-          maximum: 63
-          default: 0
+      $ref: /schemas/types.yaml#/definitions/uint32
+      minimum: 0
+      maximum: 63
+      default: 0
 
     qcom,bias-ctrl-value:
       description:
         It is a 6 bit value that specifies bias-ctrl-value. It is a PHY
         tuning parameter that may vary for different boards of same SOC.
-      allOf:
-        - $ref: /schemas/types.yaml#/definitions/uint32
-        - minimum: 0
-          maximum: 63
-          default: 32
+      $ref: /schemas/types.yaml#/definitions/uint32
+      minimum: 0
+      maximum: 63
+      default: 32
 
     qcom,charge-ctrl-value:
-     description:
+      description:
         It is a 2 bit value that specifies charge-ctrl-value. It is a PHY
         tuning parameter that may vary for different boards of same SOC.
-     allOf:
-       - $ref: /schemas/types.yaml#/definitions/uint32
-       - minimum: 0
-         maximum: 3
-         default: 0
+      $ref: /schemas/types.yaml#/definitions/uint32
+      minimum: 0
+      maximum: 3
+      default: 0
 
     qcom,hstx-trim-value:
       description:
@@ -115,22 +112,20 @@ then:
         output current.
         Possible range is - 15mA to 24mA (stepsize of 600 uA).
         See dt-bindings/phy/phy-qcom-qusb2.h for applicable values.
-      allOf:
-        - $ref: /schemas/types.yaml#/definitions/uint32
-        - minimum: 0
-          maximum: 15
-          default: 3
+      $ref: /schemas/types.yaml#/definitions/uint32
+      minimum: 0
+      maximum: 15
+      default: 3
 
     qcom,preemphasis-level:
       description:
         It is a 2 bit value that specifies pre-emphasis level.
         Possible range is 0 to 15% (stepsize of 5%).
         See dt-bindings/phy/phy-qcom-qusb2.h for applicable values.
-      allOf:
-        - $ref: /schemas/types.yaml#/definitions/uint32
-        - minimum: 0
-          maximum: 3
-          default: 0
+      $ref: /schemas/types.yaml#/definitions/uint32
+      minimum: 0
+      maximum: 3
+      default: 2
 
     qcom,preemphasis-width:
       description:
@@ -138,21 +133,19 @@ then:
         pre-emphasis (specified using qcom,preemphasis-level) must be in
         effect. Duration could be half-bit of full-bit.
         See dt-bindings/phy/phy-qcom-qusb2.h for applicable values.
-      allOf:
-        - $ref: /schemas/types.yaml#/definitions/uint32
-        - minimum: 0
-          maximum: 1
-          default: 0
+      $ref: /schemas/types.yaml#/definitions/uint32
+      minimum: 0
+      maximum: 1
+      default: 0
 
     qcom,hsdisc-trim-value:
       description:
         It is a 2 bit value tuning parameter that control disconnect
         threshold and may vary for different boards of same SOC.
-      allOf:
-        - $ref: /schemas/types.yaml#/definitions/uint32
-        - minimum: 0
-          maximum: 3
-          default: 1
+      $ref: /schemas/types.yaml#/definitions/uint32
+      minimum: 0
+      maximum: 3
+      default: 0
 
 required:
   - compatible