Merge tag 'devicetree-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree updates from Rob Herring:

 - Convert /reserved-memory bindings to schemas

 - Convert a bunch of NFC bindings to schemas

 - Convert bindings to schema: Xilinx USB, Freescale DDR controller, Arm
   CCI-400, UBlox Neo-6M, 1-Wire GPIO, MSI controller, ASpeed LPC, OMAP
   and Inside-Secure HWRNG, register-bit-led, OV5640, Silead GSL1680,
   Elan ekth3000, Marvell bluetooth, TI wlcore, TI bluetooth, ESP
   ESP8089, tlm,trusted-foundations, Microchip cap11xx, Ralink SoCs and
   boards, and TI sysc

 - New binding schemas for: msi-ranges, Aspeed UART routing controller,
   palmbus, Xylon LogiCVC display controller, Mediatek's MT7621 SDRAM
   memory controller, and Apple M1 PCIe host

 - Run schema checks for %.dtb targets

 - Improve build time when using DT_SCHEMA_FILES

 - Improve error message when dtschema is not found

 - Various doc reference fixes in MAINTAINERS

 - Convert architectures to common CPU h/w ID parsing function
   of_get_cpu_hwid().

 - Allow for empty NUMA node IDs which may be hotplugged

 - Cleanup of __fdt_scan_reserved_mem()

 - Constify device_node parameters

 - Update dtc to upstream v1.6.1-19-g0a3a9d3449c8. Adds new checks
   'node_name_vs_property_name' and 'interrupt_map'.

 - Enable dtc 'unit_address_format' warning by default

 - Fix unittest EXPECT text for gpio hog errors

* tag 'devicetree-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (97 commits)
  dt-bindings: net: ti,bluetooth: Document default max-speed
  dt-bindings: pci: rcar-pci-ep: Document r8a7795
  dt-bindings: net: qcom,ipa: IPA does support up to two iommus
  of/fdt: Remove of_scan_flat_dt() usage for __fdt_scan_reserved_mem()
  of: unittest: document intentional interrupt-map provider build warning
  of: unittest: fix EXPECT text for gpio hog errors
  of/unittest: Disable new dtc node_name_vs_property_name and interrupt_map warnings
  scripts/dtc: Update to upstream version v1.6.1-19-g0a3a9d3449c8
  dt-bindings: arm: firmware: tlm,trusted-foundations: Convert txt bindings to yaml
  dt-bindings: display: tilcd: Fix endpoint addressing in example
  dt-bindings: input: microchip,cap11xx: Convert txt bindings to yaml
  dt-bindings: ufs: exynos-ufs: add exynosautov9 compatible
  dt-bindings: ufs: exynos-ufs: add io-coherency property
  dt-bindings: mips: convert Ralink SoCs and boards to schema
  dt-bindings: display: xilinx: Fix example with psgtr
  dt-bindings: net: nfc: nxp,pn544: Convert txt bindings to yaml
  dt-bindings: Add a help message when dtschema tools are missing
  dt-bindings: bus: ti-sysc: Update to use yaml binding
  dt-bindings: sram: Allow numbers in sram region node name
  dt-bindings: display: Document the Xylon LogiCVC display controller
  ...

1 files changed, 0 insertions, 224 deletions

diff --git a/Documentation/devicetree/bindings/arm/cci.txt b/Documentation/devicetree/bindings/arm/cci.txt
deleted file mode 100644
index 9600761f2d5b..000000000000
--- a/Documentation/devicetree/bindings/arm/cci.txt
+++ /dev/null
@@ -1,224 +0,0 @@
-=======================================================
-ARM CCI cache coherent interconnect binding description
-=======================================================
-
-ARM multi-cluster systems maintain intra-cluster coherency through a
-cache coherent interconnect (CCI) that is capable of monitoring bus
-transactions and manage coherency, TLB invalidations and memory barriers.
-
-It allows snooping and distributed virtual memory message broadcast across
-clusters, through memory mapped interface, with a global control register
-space and multiple sets of interface control registers, one per slave
-interface.
-
-* CCI interconnect node
-
-	Description: Describes a CCI cache coherent Interconnect component
-
-	Node name must be "cci".
-	Node's parent must be the root node /, and the address space visible
-	through the CCI interconnect is the same as the one seen from the
-	root node (ie from CPUs perspective as per DT standard).
-	Every CCI node has to define the following properties:
-
-	- compatible
-		Usage: required
-		Value type: <string>
-		Definition: must contain one of the following:
-			    "arm,cci-400"
-			    "arm,cci-500"
-			    "arm,cci-550"
-
-	- reg
-		Usage: required
-		Value type: Integer cells. A register entry, expressed as a pair
-			    of cells, containing base and size.
-		Definition: A standard property. Specifies base physical
-			    address of CCI control registers common to all
-			    interfaces.
-
-	- ranges:
-		Usage: required
-		Value type: Integer cells. An array of range entries, expressed
-			    as a tuple of cells, containing child address,
-			    parent address and the size of the region in the
-			    child address space.
-		Definition: A standard property. Follow rules in the Devicetree
-			    Specification for hierarchical bus addressing. CCI
-			    interfaces addresses refer to the parent node
-			    addressing scheme to declare their register bases.
-
-	CCI interconnect node can define the following child nodes:
-
-	- CCI control interface nodes
-
-		Node name must be "slave-if".
-		Parent node must be CCI interconnect node.
-
-		A CCI control interface node must contain the following
-		properties:
-
-		- compatible
-			Usage: required
-			Value type: <string>
-			Definition: must be set to
-				    "arm,cci-400-ctrl-if"
-
-		- interface-type:
-			Usage: required
-			Value type: <string>
-			Definition: must be set to one of {"ace", "ace-lite"}
-				    depending on the interface type the node
-				    represents.
-
-		- reg:
-			Usage: required
-			Value type: Integer cells. A register entry, expressed
-				    as a pair of cells, containing base and
-				    size.
-			Definition: the base address and size of the
-				    corresponding interface programming
-				    registers.
-
-	- CCI PMU node
-
-		Parent node must be CCI interconnect node.
-
-		A CCI pmu node must contain the following properties:
-
-		- compatible
-			Usage: required
-			Value type: <string>
-			Definition: Must contain one of:
-				 "arm,cci-400-pmu,r0"
-				 "arm,cci-400-pmu,r1"
-				 "arm,cci-400-pmu"  - DEPRECATED, permitted only where OS has
-						      secure access to CCI registers
-				 "arm,cci-500-pmu,r0"
-				 "arm,cci-550-pmu,r0"
-		- reg:
-			Usage: required
-			Value type: Integer cells. A register entry, expressed
-				    as a pair of cells, containing base and
-				    size.
-			Definition: the base address and size of the
-				    corresponding interface programming
-				    registers.
-
-		- interrupts:
-			Usage: required
-			Value type: Integer cells. Array of interrupt specifier
-				    entries, as defined in
-				    ../interrupt-controller/interrupts.txt.
-			Definition: list of counter overflow interrupts, one per
-				    counter. The interrupts must be specified
-				    starting with the cycle counter overflow
-				    interrupt, followed by counter0 overflow
-				    interrupt, counter1 overflow interrupt,...
-				    ,counterN overflow interrupt.
-
-				    The CCI PMU has an interrupt signal for each
-				    counter. The number of interrupts must be
-				    equal to the number of counters.
-
-* CCI interconnect bus masters
-
-	Description: masters in the device tree connected to a CCI port
-		     (inclusive of CPUs and their cpu nodes).
-
-	A CCI interconnect bus master node must contain the following
-	properties:
-
-	- cci-control-port:
-		Usage: required
-		Value type: <phandle>
-		Definition: a phandle containing the CCI control interface node
-			    the master is connected to.
-
-Example:
-
-	cpus {
-		#size-cells = <0>;
-		#address-cells = <1>;
-
-		CPU0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			cci-control-port = <&cci_control1>;
-			reg = <0x0>;
-		};
-
-		CPU1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			cci-control-port = <&cci_control1>;
-			reg = <0x1>;
-		};
-
-		CPU2: cpu@100 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			cci-control-port = <&cci_control2>;
-			reg = <0x100>;
-		};
-
-		CPU3: cpu@101 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			cci-control-port = <&cci_control2>;
-			reg = <0x101>;
-		};
-
-	};
-
-	dma0: dma@3000000 {
-		compatible = "arm,pl330", "arm,primecell";
-		cci-control-port = <&cci_control0>;
-		reg = <0x0 0x3000000 0x0 0x1000>;
-		interrupts = <10>;
-		#dma-cells = <1>;
-		#dma-channels = <8>;
-		#dma-requests = <32>;
-	};
-
-	cci@2c090000 {
-		compatible = "arm,cci-400";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x0 0x2c090000 0 0x1000>;
-		ranges = <0x0 0x0 0x2c090000 0x10000>;
-
-		cci_control0: slave-if@1000 {
-			compatible = "arm,cci-400-ctrl-if";
-			interface-type = "ace-lite";
-			reg = <0x1000 0x1000>;
-		};
-
-		cci_control1: slave-if@4000 {
-			compatible = "arm,cci-400-ctrl-if";
-			interface-type = "ace";
-			reg = <0x4000 0x1000>;
-		};
-
-		cci_control2: slave-if@5000 {
-			compatible = "arm,cci-400-ctrl-if";
-			interface-type = "ace";
-			reg = <0x5000 0x1000>;
-		};
-
-		pmu@9000 {
-			 compatible = "arm,cci-400-pmu";
-			 reg = <0x9000 0x5000>;
-			 interrupts = <0 101 4>,
-				      <0 102 4>,
-				      <0 103 4>,
-				      <0 104 4>,
-				      <0 105 4>;
-		};
-	};
-
-This CCI node corresponds to a CCI component whose control registers sits
-at address 0x000000002c090000.
-CCI slave interface @0x000000002c091000 is connected to dma controller dma0.
-CCI slave interface @0x000000002c094000 is connected to CPUs {CPU0, CPU1};
-CCI slave interface @0x000000002c095000 is connected to CPUs {CPU2, CPU3};