diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2020-01-29 10:09:44 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2020-01-29 10:09:44 -0800 |
| commit | aac96626713fe167c672f9a008be0f514aa3e237 (patch) | |
| tree | 3bf0db49fcb5124ee3ebf2ebe12e22f228b52409 | |
| parent | 6ba3d7066c71d2103da255df19eb613d299bab15 (diff) | |
| parent | eaa519983fd9e53c2a62a1e56777e1fb461865a9 (diff) | |
| download | lwn-aac96626713fe167c672f9a008be0f514aa3e237.tar.gz lwn-aac96626713fe167c672f9a008be0f514aa3e237.zip | |
Merge tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt/PHY driver updates from Greg KH:
"Here is the big USB and Thunderbolt and PHY driver updates for
5.6-rc1.
With the advent of USB4, "Thunderbolt" has really become USB4, so the
renaming of the Kconfig option and starting to share subsystem code
has begun, hence both subsystems coming in through the same tree here.
PHY driver updates also touched USB drivers, so that is coming in
through here as well.
Major stuff included in here are:
- USB 4 initial support added (i.e. Thunderbolt)
- musb driver updates
- USB gadget driver updates
- PHY driver updates
- USB PHY driver updates
- lots of USB serial stuff fixed up
- USB typec updates
- USB-IP fixes
- lots of other smaller USB driver updates
All of these have been in linux-next for a while now (the usb-serial
tree is already tested in linux-next on its own before merged into
here), with no reported issues"
[ Removed an incorrect compile test enablement for PHY_EXYNOS5250_SATA
that causes configuration warnings - Linus ]
* tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (207 commits)
Doc: ABI: add usb charger uevent
usb: phy: show USB charger type for user
usb: cdns3: fix spelling mistake and rework grammar in text
usb: phy: phy-gpio-vbus-usb: Convert to GPIO descriptors
USB: serial: cyberjack: fix spelling mistake "To" -> "Too"
USB: serial: ir-usb: simplify endpoint check
USB: serial: ir-usb: make set_termios synchronous
USB: serial: ir-usb: fix IrLAP framing
USB: serial: ir-usb: fix link-speed handling
USB: serial: ir-usb: add missing endpoint sanity check
usb: typec: fusb302: fix "op-sink-microwatt" default that was in mW
usb: typec: wcove: fix "op-sink-microwatt" default that was in mW
usb: dwc3: pci: add ID for the Intel Comet Lake -V variant
usb: typec: tcpci: mask event interrupts when remove driver
usb: host: xhci-tegra: set MODULE_FIRMWARE for tegra186
usb: chipidea: add inline for ci_hdrc_host_driver_init if host is not defined
usb: chipidea: handle single role for usb role class
usb: musb: fix spelling mistake: "periperal" -> "peripheral"
phy: ti: j721e-wiz: Fix build error without CONFIG_OF_ADDRESS
USB: usbfs: Always unlink URBs in reverse order
...
199 files changed, 9923 insertions, 2466 deletions
diff --git a/Documentation/ABI/testing/configfs-usb-gadget b/Documentation/ABI/testing/configfs-usb-gadget index 95a36589a66b..4594cc2435e8 100644 --- a/Documentation/ABI/testing/configfs-usb-gadget +++ b/Documentation/ABI/testing/configfs-usb-gadget @@ -16,6 +16,10 @@ Description: write UDC's name found in /sys/class/udc/* to bind a gadget, empty string "" to unbind. + max_speed - maximum speed the driver supports. Valid + names are super-speed-plus, super-speed, + high-speed, full-speed, and low-speed. + bDeviceClass - USB device class code bDeviceSubClass - USB device subclass code bDeviceProtocol - USB device protocol code diff --git a/Documentation/ABI/testing/usb-charger-uevent b/Documentation/ABI/testing/usb-charger-uevent new file mode 100644 index 000000000000..419a92dd0d86 --- /dev/null +++ b/Documentation/ABI/testing/usb-charger-uevent @@ -0,0 +1,46 @@ +What: Raise a uevent when a USB charger is inserted or removed +Date: 2020-01-14 +KernelVersion: 5.6 +Contact: linux-usb@vger.kernel.org +Description: There are two USB charger states: + USB_CHARGER_ABSENT + USB_CHARGER_PRESENT + There are five USB charger types: + USB_CHARGER_UNKNOWN_TYPE: Charger type is unknown + USB_CHARGER_SDP_TYPE: Standard Downstream Port + USB_CHARGER_CDP_TYPE: Charging Downstream Port + USB_CHARGER_DCP_TYPE: Dedicated Charging Port + USB_CHARGER_ACA_TYPE: Accessory Charging Adapter + https://www.usb.org/document-library/battery-charging-v12-spec-and-adopters-agreement + + Here are two examples taken using udevadm monitor -p when + USB charger is online: + UDEV change /devices/soc0/usbphynop1 (platform) + ACTION=change + DEVPATH=/devices/soc0/usbphynop1 + DRIVER=usb_phy_generic + MODALIAS=of:Nusbphynop1T(null)Cusb-nop-xceiv + OF_COMPATIBLE_0=usb-nop-xceiv + OF_COMPATIBLE_N=1 + OF_FULLNAME=/usbphynop1 + OF_NAME=usbphynop1 + SEQNUM=2493 + SUBSYSTEM=platform + USB_CHARGER_STATE=USB_CHARGER_PRESENT + USB_CHARGER_TYPE=USB_CHARGER_SDP_TYPE + USEC_INITIALIZED=227422826 + + USB charger is offline: + KERNEL change /devices/soc0/usbphynop1 (platform) + ACTION=change + DEVPATH=/devices/soc0/usbphynop1 + DRIVER=usb_phy_generic + MODALIAS=of:Nusbphynop1T(null)Cusb-nop-xceiv + OF_COMPATIBLE_0=usb-nop-xceiv + OF_COMPATIBLE_N=1 + OF_FULLNAME=/usbphynop1 + OF_NAME=usbphynop1 + SEQNUM=2494 + SUBSYSTEM=platform + USB_CHARGER_STATE=USB_CHARGER_ABSENT + USB_CHARGER_TYPE=USB_CHARGER_UNKNOWN_TYPE diff --git a/Documentation/admin-guide/thunderbolt.rst b/Documentation/admin-guide/thunderbolt.rst index 898ad78f3cc7..10c4f0ce2ad0 100644 --- a/Documentation/admin-guide/thunderbolt.rst +++ b/Documentation/admin-guide/thunderbolt.rst @@ -1,6 +1,28 @@ -============= - Thunderbolt -============= +.. SPDX-License-Identifier: GPL-2.0 + +====================== + USB4 and Thunderbolt +====================== +USB4 is the public specification based on Thunderbolt 3 protocol with +some differences at the register level among other things. Connection +manager is an entity running on the host router (host controller) +responsible for enumerating routers and establishing tunnels. A +connection manager can be implemented either in firmware or software. +Typically PCs come with a firmware connection manager for Thunderbolt 3 +and early USB4 capable systems. Apple systems on the other hand use +software connection manager and the later USB4 compliant devices follow +the suit. + +The Linux Thunderbolt driver supports both and can detect at runtime which +connection manager implementation is to be used. To be on the safe side the +software connection manager in Linux also advertises security level +``user`` which means PCIe tunneling is disabled by default. The +documentation below applies to both implementations with the exception that +the software connection manager only supports ``user`` security level and +is expected to be accompanied with an IOMMU based DMA protection. + +Security levels and how to use them +----------------------------------- The interface presented here is not meant for end users. Instead there should be a userspace tool that handles all the low-level details, keeps a database of the authorized devices and prompts users for new connections. @@ -18,8 +40,6 @@ This will authorize all devices automatically when they appear. However, keep in mind that this bypasses the security levels and makes the system vulnerable to DMA attacks. -Security levels and how to use them ------------------------------------ Starting with Intel Falcon Ridge Thunderbolt controller there are 4 security levels available. Intel Titan Ridge added one more security level (usbonly). The reason for these is the fact that the connected devices can diff --git a/Documentation/devicetree/bindings/connector/usb-connector.txt b/Documentation/devicetree/bindings/connector/usb-connector.txt index d357987181ee..88578ac1a8a7 100644 --- a/Documentation/devicetree/bindings/connector/usb-connector.txt +++ b/Documentation/devicetree/bindings/connector/usb-connector.txt @@ -1,8 +1,8 @@ USB Connector ============= -USB connector node represents physical USB connector. It should be -a child of USB interface controller. +A USB connector node represents a physical USB connector. It should be +a child of a USB interface controller. Required properties: - compatible: describes type of the connector, must be one of: diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml new file mode 100644 index 000000000000..ded7d6f0a119 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml @@ -0,0 +1,135 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/allwinner,sun9i-a80-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A80 USB PHY Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + "#phy-cells": + const: 0 + + compatible: + const: allwinner,sun9i-a80-usb-phy + + reg: + maxItems: 1 + + clocks: + anyOf: + - description: Main PHY Clock + + - items: + - description: Main PHY clock + - description: HSIC 12MHz clock + - description: HSIC 480MHz clock + + clock-names: + oneOf: + - const: phy + + - items: + - const: phy + - const: hsic_12M + - const: hsic_480M + + resets: + anyOf: + - description: Normal USB PHY reset + + - items: + - description: Normal USB PHY reset + - description: HSIC Reset + + reset-names: + oneOf: + - const: phy + + - items: + - const: phy + - const: hsic + + phy_type: + const: hsic + description: + When absent, the PHY type will be assumed to be normal USB. + + phy-supply: + description: + Regulator that powers VBUS + +required: + - "#phy-cells" + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + +additionalProperties: false + +if: + properties: + phy_type: + const: hsic + + required: + - phy_type + +then: + properties: + clocks: + maxItems: 3 + + clock-names: + maxItems: 3 + + resets: + maxItems: 2 + + reset-names: + maxItems: 2 + +examples: + - | + #include <dt-bindings/clock/sun9i-a80-usb.h> + #include <dt-bindings/reset/sun9i-a80-usb.h> + + usbphy1: phy@a00800 { + compatible = "allwinner,sun9i-a80-usb-phy"; + reg = <0x00a00800 0x4>; + clocks = <&usb_clocks CLK_USB0_PHY>; + clock-names = "phy"; + resets = <&usb_clocks RST_USB0_PHY>; + reset-names = "phy"; + phy-supply = <®_usb1_vbus>; + #phy-cells = <0>; + }; + + - | + #include <dt-bindings/clock/sun9i-a80-usb.h> + #include <dt-bindings/reset/sun9i-a80-usb.h> + + usbphy3: phy@a02800 { + compatible = "allwinner,sun9i-a80-usb-phy"; + reg = <0x00a02800 0x4>; + clocks = <&usb_clocks CLK_USB2_PHY>, + <&usb_clocks CLK_USB_HSIC>, + <&usb_clocks CLK_USB2_HSIC>; + clock-names = "phy", + "hsic_12M", + "hsic_480M"; + resets = <&usb_clocks RST_USB2_PHY>, + <&usb_clocks RST_USB2_HSIC>; + reset-names = "phy", + "hsic"; + phy_type = "hsic"; + phy-supply = <®_usb3_vbus>; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt index 24a0d06acd1d..698aacbdcfc4 100644 --- a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt @@ -1,30 +1,49 @@ Broadcom STB USB PHY Required properties: - - compatible: brcm,brcmstb-usb-phy - - reg: two offset and length pairs. - The first pair specifies a manditory set of memory mapped - registers used for general control of the PHY. - The second pair specifies optional registers used by some of - the SoCs that support USB 3.x - - #phy-cells: Shall be 1 as it expects one argument for setting - the type of the PHY. Possible values are: - - PHY_TYPE_USB2 for USB1.1/2.0 PHY - - PHY_TYPE_USB3 for USB3.x PHY +- compatible: should be one of + "brcm,brcmstb-usb-phy" + "brcm,bcm7216-usb-phy" + "brcm,bcm7211-usb-phy" + +- reg and reg-names properties requirements are specific to the + compatible string. + "brcm,brcmstb-usb-phy": + - reg: 1 or 2 offset and length pairs. One for the base CTRL registers + and an optional pair for systems with USB 3.x support + - reg-names: not specified + "brcm,bcm7216-usb-phy": + - reg: 3 offset and length pairs for CTRL, XHCI_EC and XHCI_GBL + registers + - reg-names: "ctrl", "xhci_ec", "xhci_gbl" + "brcm,bcm7211-usb-phy": + - reg: 5 offset and length pairs for CTRL, XHCI_EC, XHCI_GBL, + USB_PHY and USB_MDIO registers and an optional pair + for the BDC registers + - reg-names: "ctrl", "xhci_ec", "xhci_gbl", "usb_phy", "usb_mdio", "bdc_ec" + +- #phy-cells: Shall be 1 as it expects one argument for setting + the type of the PHY. Possible values are: + - PHY_TYPE_USB2 for USB1.1/2.0 PHY + - PHY_TYPE_USB3 for USB3.x PHY Optional Properties: - clocks : clock phandles. - clock-names: String, clock name. +- interrupts: wakeup interrupt +- interrupt-names: "wakeup" - brcm,ipp: Boolean, Invert Port Power. Possible values are: 0 (Don't invert), 1 (Invert) - brcm,ioc: Boolean, Invert Over Current detection. Possible values are: 0 (Don't invert), 1 (Invert) -NOTE: one or both of the following two properties must be set -- brcm,has-xhci: Boolean indicating the phy has an XHCI phy. -- brcm,has-eohci: Boolean indicating the phy has an EHCI/OHCI phy. - dr_mode: String, PHY Device mode. Possible values are: "host", "peripheral ", "drd" or "typec-pd" If this property is not defined, the phy will default to "host" mode. +- brcm,syscon-piarbctl: phandle to syscon for handling config registers +NOTE: one or both of the following two properties must be set +- brcm,has-xhci: Boolean indicating the phy has an XHCI phy. +- brcm,has-eohci: Boolean indicating the phy has an EHCI/OHCI phy. + Example: @@ -41,3 +60,27 @@ usbphy_0: usb-phy@f0470200 { clocks = <&usb20>, <&usb30>; clock-names = "sw_usb", "sw_usb3"; }; + +usb-phy@29f0200 { + reg = <0x29f0200 0x200>, + <0x29c0880 0x30>, + <0x29cc100 0x534>, + <0x2808000 0x24>, + <0x2980080 0x8>; + reg-names = "ctrl", + "xhci_ec", + "xhci_gbl", + "usb_phy", + "usb_mdio"; + brcm,ioc = <0x0>; + brcm,ipp = <0x0>; + compatible = "brcm,bcm7211-usb-phy"; + interrupts = <0x30>; + interrupt-parent = <&vpu_intr1_nosec_intc>; + interrupt-names = "wake"; + #phy-cells = <0x1>; + brcm,has-xhci; + syscon-piarbctl = <&syscon_piarbctl>; + clocks = <&scmi_clk 256>; + clock-names = "sw_usb"; +}; diff --git a/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt b/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt index b640845fec67..c03ad2198410 100644 --- a/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt +++ b/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt @@ -2,6 +2,7 @@ Required properties: - compatible: should be one or more of + "brcm,bcm7216-sata-phy" "brcm,bcm7425-sata-phy" "brcm,bcm7445-sata-phy" "brcm,iproc-ns2-sata-phy" diff --git a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml new file mode 100644 index 000000000000..ff7959c21af0 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/intel,lgm-emmc-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel Lightning Mountain(LGM) eMMC PHY Device Tree Bindings + +maintainers: + - Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com> + +description: |+ + Bindings for eMMC PHY on Intel's Lightning Mountain SoC, syscon + node is used to reference the base address of eMMC phy registers. + + The eMMC PHY node should be the child of a syscon node with the + required property: + + - compatible: Should be one of the following: + "intel,lgm-syscon", "syscon" + - reg: + maxItems: 1 + +properties: + compatible: + const: intel,lgm-emmc-phy + + "#phy-cells": + const: 0 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - "#phy-cells" + - compatible + - reg + - clocks + +examples: + - | + sysconf: chiptop@e0200000 { + compatible = "intel,lgm-syscon", "syscon"; + reg = <0xe0200000 0x100>; + + emmc-phy: emmc-phy@a8 { + compatible = "intel,lgm-emmc-phy"; + reg = <0x00a8 0x10>; + clocks = <&emmc>; + #phy-cells = <0>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt b/Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt index 6e1b47bfce43..03f5939d3d19 100644 --- a/Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt +++ b/Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt @@ -2,21 +2,24 @@ Cadence Sierra PHY ----------------------- Required properties: -- compatible: cdns,sierra-phy-t0 -- clocks: Must contain an entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names: Must be "phy_clk" +- compatible: Must be "cdns,sierra-phy-t0" for Sierra in Cadence platform + Must be "ti,sierra-phy-t0" for Sierra in TI's J721E SoC. - resets: Must contain an entry for each in reset-names. See ../reset/reset.txt for details. - reset-names: Must include "sierra_reset" and "sierra_apb". "sierra_reset" must control the reset line to the PHY. "sierra_apb" must control the reset line to the APB PHY - interface. + interface ("sierra_apb" is optional). - reg: register range for the PHY. - #address-cells: Must be 1 - #size-cells: Must be 0 Optional properties: +- clocks: Must contain an entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: Must contain "cmn_refclk_dig_div" and + "cmn_refclk1_dig_div" for configuring the frequency of + the clock to the lanes. "phy_clk" is deprecated. - cdns,autoconf: A boolean property whose presence indicates that the PHY registers will be configured by hardware. If not present, all sub-node optional properties must be diff --git a/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml b/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml index bb0da87bcd84..476c56a1dc8c 100644 --- a/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml +++ b/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml @@ -13,9 +13,6 @@ properties: "#phy-cells": const: 0 - "#clock-cells": - const: 0 - compatible: enum: - rockchip,px30-dsi-dphy @@ -49,7 +46,6 @@ properties: required: - "#phy-cells" - - "#clock-cells" - compatible - reg - clocks @@ -66,7 +62,6 @@ examples: reg = <0x0 0xff2e0000 0x0 0x10000>; clocks = <&pmucru 13>, <&cru 12>; clock-names = "ref", "pclk"; - #clock-cells = <0>; resets = <&cru 12>; reset-names = "apb"; #phy-cells = <0>; diff --git a/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt deleted file mode 100644 index 64f7109aea1f..000000000000 --- a/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt +++ /dev/null @@ -1,37 +0,0 @@ -Allwinner sun9i USB PHY ------------------------ - -Required properties: -- compatible : should be one of - * allwinner,sun9i-a80-usb-phy -- reg : a list of offset + length pairs -- #phy-cells : from the generic phy bindings, must be 0 -- phy_type : "hsic" for HSIC usage; - other values or absence of this property indicates normal USB -- clocks : phandle + clock specifier for the phy clocks -- clock-names : depending on the "phy_type" property, - * "phy" for normal USB - * "hsic_480M", "hsic_12M" for HSIC -- resets : a list of phandle + reset specifier pairs -- reset-names : depending on the "phy_type" property, - * "phy" for normal USB - * "hsic" for HSIC - -Optional Properties: -- phy-supply : from the generic phy bindings, a phandle to a regulator that - provides power to VBUS. - -It is recommended to list all clocks and resets available. -The driver will only use those matching the phy_type. - -Example: - usbphy1: phy@a01800 { - compatible = "allwinner,sun9i-a80-usb-phy"; - reg = <0x00a01800 0x4>; - clocks = <&usb_phy_clk 2>, <&usb_phy_clk 10>, - <&usb_phy_clk 3>; - clock-names = "hsic_480M", "hsic_12M", "phy"; - resets = <&usb_phy_clk 18>, <&usb_phy_clk 19>; - reset-names = "hsic", "phy"; - #phy-cells = <0>; - }; diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml new file mode 100644 index 000000000000..452cee1aed32 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml @@ -0,0 +1,221 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/ti,phy-j721e-wiz.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: TI J721E WIZ (SERDES Wrapper) + +maintainers: + - Kishon Vijay Abraham I <kishon@ti.com> + +properties: + compatible: + enum: + - ti,j721e-wiz-16g + - ti,j721e-wiz-10g + + power-domains: + maxItems: 1 + + clocks: + maxItems: 3 + description: clock-specifier to represent input to the WIZ + + clock-names: + items: + - const: fck + - const: core_ref_clk + - const: ext_ref_clk + + num-lanes: + minimum: 1 + maximum: 4 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + "#reset-cells": + const: 1 + + ranges: true + + assigned-clocks: + maxItems: 2 + + assigned-clock-parents: + maxItems: 2 + + typec-dir-gpios: + maxItems: 1 + description: + GPIO to signal Type-C cable orientation for lane swap. + If GPIO is active, lane 0 and lane 1 of SERDES will be swapped to + achieve the funtionality of an external type-C plug flip mux. + + typec-dir-debounce-ms: + minimum: 100 + maximum: 1000 + default: 100 + description: + Number of milliseconds to wait before sampling typec-dir-gpio. + If not specified, the default debounce of 100ms will be used. + Type-C spec states minimum CC pin debounce of 100 ms and maximum + of 200 ms. However, some solutions might need more than 200 ms. + +patternProperties: + "^pll[0|1]-refclk$": + type: object + description: | + WIZ node should have subnodes for each of the PLLs present in + the SERDES. + properties: + clocks: + maxItems: 2 + description: Phandle to clock nodes representing the two inputs to PLL. + + "#clock-cells": + const: 0 + + assigned-clocks: + maxItems: 1 + + assigned-clock-parents: + maxItems: 1 + + required: + - clocks + - "#clock-cells" + - assigned-clocks + - assigned-clock-parents + + "^cmn-refclk1?-dig-div$": + type: object + description: + WIZ node should have subnodes for each of the PMA common refclock + provided by the SERDES. + properties: + clocks: + maxItems: 1 + description: Phandle to the clock node representing the input to the + divider clock. + + "#clock-cells": + const: 0 + + required: + - clocks + - "#clock-cells" + + "^refclk-dig$": + type: object + description: | + WIZ node should have subnode for refclk_dig to select the reference + clock source for the reference clock used in the PHY and PMA digital + logic. + properties: + clocks: + maxItems: 4 + description: Phandle to four clock nodes representing the inputs to + refclk_dig + + "#clock-cells": + const: 0 + + assigned-clocks: + maxItems: 1 + + assigned-clock-parents: + maxItems: 1 + + required: + - clocks + - "#clock-cells" + - assigned-clocks + - assigned-clock-parents + + "^serdes@[0-9a-f]+$": + type: object + description: | + WIZ node should have '1' subnode for the SERDES. It could be either + Sierra SERDES or Torrent SERDES. Sierra SERDES should follow the + bindings specified in + Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt + Torrent SERDES should follow the bindings specified in + Documentation/devicetree/bindings/phy/phy-cadence-dp.txt + +required: + - compatible + - power-domains + - clocks + - clock-names + - num-lanes + - "#address-cells" + - "#size-cells" + - "#reset-cells" + - ranges + +examples: + - | + #include <dt-bindings/soc/ti,sci_pm_domain.h> + + wiz@5000000 { + compatible = "ti,j721e-wiz-16g"; + #address-cells = <1>; + #size-cells = <1>; + power-domains = <&k3_pds 292 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 292 5>, <&k3_clks 292 11>, <&dummy_cmn_refclk>; + clock-names = "fck", "core_ref_clk", "ext_ref_clk"; + assigned-clocks = <&k3_clks 292 11>, <&k3_clks 292 0>; + assigned-clock-parents = <&k3_clks 292 15>, <&k3_clks 292 4>; + num-lanes = <2>; + #reset-cells = <1>; + ranges = <0x5000000 0x5000000 0x10000>; + + pll0-refclk { + clocks = <&k3_clks 293 13>, <&dummy_cmn_refclk>; + #clock-cells = <0>; + assigned-clocks = <&wiz1_pll0_refclk>; + assigned-clock-parents = <&k3_clks 293 13>; + }; + + pll1-refclk { + clocks = <&k3_clks 293 0>, <&dummy_cmn_refclk1>; + #clock-cells = <0>; + assigned-clocks = <&wiz1_pll1_refclk>; + assigned-clock-parents = <&k3_clks 293 0>; + }; + + cmn-refclk-dig-div { + clocks = <&wiz1_refclk_dig>; + #clock-cells = <0>; + }; + + cmn-refclk1-dig-div { + clocks = <&wiz1_pll1_refclk>; + #clock-cells = <0>; + }; + + refclk-dig { + clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>; + #clock-cells = <0>; + assigned-clocks = <&wiz0_refclk_dig>; + assigned-clock-parents = <&k3_clks 292 11>; + }; + + serdes@5000000 { + compatible = "cdns,ti,sierra-phy-t0"; + reg-names = "serdes"; + reg = <0x5000000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&serdes_wiz0 0>; + reset-names = "sierra_reset"; + clocks = <&wiz0_cmn_refclk_dig_div>, <&wiz0_cmn_refclk1_dig_div>; + clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div"; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt index cfc9f40ab641..51376cbe5f3d 100644 --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt @@ -15,6 +15,10 @@ Required properties: "qcom,ci-hdrc" "chipidea,usb2" "xlnx,zynq-usb-2.20a" + "nvidia,tegra20-udc" + "nvidia,tegra30-udc" + "nvidia,tegra114-udc" + "nvidia,tegra124-udc" - reg: base address and length of the registers - interrupts: interrupt for the USB controller diff --git a/Documentation/devicetree/bindings/usb/mediatek,musb.txt b/Documentation/devicetree/bindings/usb/mediatek,musb.txt new file mode 100644 index 000000000000..2b8a87c90d9e --- /dev/null +++ b/Documentation/devicetree/bindings/usb/mediatek,musb.txt @@ -0,0 +1,57 @@ +MediaTek musb DRD/OTG controller +------------------------------------------- + +Required properties: + - compatible : should be one of: + "mediatek,mt2701-musb" + ... + followed by "mediatek,mtk-musb" + - reg : specifies physical base address and size of + the registers + - interrupts : interrupt used by musb controller + - interrupt-names : must be "mc" + - phys : PHY specifier for the OTG phy + - dr_mode : should be one of "host", "peripheral" or "otg", + refer to usb/generic.txt + - clocks : a list of phandle + clock-specifier pairs, one for + each entry in clock-names + - clock-names : must contain "main", "mcu", "univpll" + for clocks of controller + +Optional properties: + - power-domains : a phandle to USB power domain node to control USB's + MTCMOS + +Required child nodes: + usb connector node as defined in bindings/connector/usb-connector.txt +Optional properties: + - id-gpios : input GPIO for USB ID pin. + - vbus-gpios : input GPIO for USB VBUS pin. + - vbus-supply : reference to the VBUS regulator, needed when supports + dual-role mode + - usb-role-switch : use USB Role Switch to support dual-role switch, see + usb/generic.txt. + +Example: + +usb2: usb@11200000 { + compatible = "mediatek,mt2701-musb", + "mediatek,mtk-musb"; + reg = <0 0x11200000 0 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "mc"; + phys = <&u2port2 PHY_TYPE_USB2>; + dr_mode = "otg"; + clocks = <&pericfg CLK_PERI_USB0>, + <&pericfg CLK_PERI_USB0_MCU>, + <&pericfg CLK_PERI_USB_SLV>; + clock-names = "main","mcu","univpll"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; + usb-role-switch; + connector{ + compatible = "gpio-usb-b-connector", "usb-b-connector"; + type = "micro"; + id-gpios = <&pio 44 GPIO_ACTIVE_HIGH>; + vbus-supply = <&usb_vbus>; + }; +}; diff --git a/MAINTAINERS b/MAINTAINERS index 3208d8a8be09..3d291b28c2b4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -16474,6 +16474,7 @@ M: Andreas Noever <andreas.noever@gmail.com> M: Michael Jamet <michael.jamet@intel.com> M: Mika Westerberg <mika.westerberg@linux.intel.com> M: Yehezkel Bernat <YehezkelShB@gmail.com> +L: linux-usb@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt.git S: Maintained F: Documentation/admin-guide/thunderbolt.rst diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts index 26160c324802..942e3a2cac35 100644 --- a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts +++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts @@ -143,7 +143,7 @@ compatible = "smsc,usb3503a"; reg = <0x8>; connect-gpios = <&gpioext2 1 GPIO_ACTIVE_HIGH>; - intn-gpios = <&gpioext2 0 GPIO_ACTIVE_LOW>; + intn-gpios = <&gpioext2 0 GPIO_ACTIVE_HIGH>; initial-mode = <1>; }; }; diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 9d87d4e440ea..040c949414fa 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -823,6 +823,17 @@ static int davinci_phy_fixup(struct phy_device *phydev) #define HAS_NAND IS_ENABLED(CONFIG_MTD_NAND_DAVINCI) +#define GPIO_nVBUS_DRV 160 + +static struct gpiod_lookup_table dm644evm_usb_gpio_table = { + .dev_id = "musb-davinci", + .table = { + GPIO_LOOKUP("davinci_gpio", GPIO_nVBUS_DRV, NULL, + GPIO_ACTIVE_HIGH), + { } + }, +}; + static __init void davinci_evm_init(void) { int ret; @@ -875,6 +886,7 @@ static __init void davinci_evm_init(void) dm644x_init_asp(); /* irlml6401 switches over 1A, in under 8 msec */ + gpiod_add_lookup_table(&dm644evm_usb_gpio_table); davinci_setup_usb(1000, 8); if (IS_BUILTIN(CONFIG_PHYLIB)) { diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c index eba917d69c0a..35dd3adb7712 100644 --- a/arch/arm/mach-pxa/colibri-pxa320.c +++ b/arch/arm/mach-pxa/colibri-pxa320.c @@ -11,9 +11,9 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/platform_device.h> +#include <linux/gpio/machine.h> #include <linux/gpio.h> #include <linux/interrupt.h> -#include <linux/usb/gpio_vbus.h> #include <asm/mach-types.h> #include <linux/sizes.h> @@ -144,17 +144,18 @@ static inline void __init colibri_pxa320_init_eth(void) {} #endif /* CONFIG_AX88796 */ #if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE) -static struct gpio_vbus_mach_info colibri_pxa320_gpio_vbus_info = { - .gpio_vbus = mfp_to_gpio(MFP_PIN_GPIO96), - .gpio_pullup = -1, +static struct gpiod_lookup_table gpio_vbus_gpiod_table = { + .dev_id = "gpio-vbus", + .table = { + GPIO_LOOKUP("gpio-pxa", MFP_PIN_GPIO96, + "vbus", GPIO_ACTIVE_HIGH), + { }, + }, }; static struct platform_device colibri_pxa320_gpio_vbus = { .name = "gpio-vbus", .id = -1, - .dev = { - .platform_data = &colibri_pxa320_gpio_vbus_info, - }, }; static void colibri_pxa320_udc_command(int cmd) @@ -173,6 +174,7 @@ static struct pxa2xx_udc_mach_info colibri_pxa320_udc_info __initdata = { static void __init colibri_pxa320_init_udc(void) { pxa_set_udc_info(&colibri_pxa320_udc_info); + gpiod_add_lookup_table(&gpio_vbus_gpiod_table); platform_device_register(&colibri_pxa320_gpio_vbus); } #else diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c index 91f7c3e40065..f37c44b6139d 100644 --- a/arch/arm/mach-pxa/eseries.c +++ b/arch/arm/mach-pxa/eseries.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/clk-provider.h> +#include <linux/gpio/machine.h> #include <linux/gpio.h> #include <linux/delay.h> #include <linux/platform_device.h> @@ -22,7 +23,6 @@ #include <linux/mfd/t7l66xb.h> #include <linux/mtd/rawnand.h> #include <linux/mtd/partitions.h> -#include <linux/usb/gpio_vbus.h> #include <linux/memblock.h> #include <video/w100fb.h> @@ -51,18 +51,20 @@ void __init eseries_fixup(struct tag *tags, char **cmdline) memblock_add(0xa0000000, SZ_64M); } -struct gpio_vbus_mach_info e7xx_udc_info = { - .gpio_vbus = GPIO_E7XX_USB_DISC, - .gpio_pullup = GPIO_E7XX_USB_PULLUP, - .gpio_pullup_inverted = 1 +static struct gpiod_lookup_table e7xx_gpio_vbus_gpiod_table __maybe_unused = { + .dev_id = "gpio-vbus", + .table = { + GPIO_LOOKUP("gpio-pxa", GPIO_E7XX_USB_DISC, + "vbus", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-pxa", GPIO_E7XX_USB_PULLUP, + "pullup", GPIO_ACTIVE_LOW), + { }, + }, }; static struct platform_device e7xx_gpio_vbus __maybe_unused = { .name = "gpio-vbus", .id = -1, - .dev = { - .platform_data = &e7xx_udc_info, - }, }; struct pxaficp_platform_data e7xx_ficp_platform_data = { @@ -165,6 +167,7 @@ static void __init e330_init(void) pxa_set_stuart_info(NULL); eseries_register_clks(); eseries_get_tmio_gpios(); + gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table); platform_add_devices(ARRAY_AND_SIZE(e330_devices)); } @@ -216,6 +219,7 @@ static void __init e350_init(void) pxa_set_stuart_info(NULL); eseries_register_clks(); eseries_get_tmio_gpios(); + gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table); platform_add_devices(ARRAY_AND_SIZE(e350_devices)); } @@ -340,6 +344,7 @@ static void __init e400_init(void) eseries_register_clks(); eseries_get_tmio_gpios(); pxa_set_fb_info(NULL, &e400_pxafb_mach_info); + gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table); platform_add_devices(ARRAY_AND_SIZE(e400_devices)); } @@ -534,6 +539,7 @@ static void __init e740_init(void) clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name, "UDCCLK", &pxa25x_device_udc.dev), eseries_get_tmio_gpios(); + gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table); platform_add_devices(ARRAY_AND_SIZE(e740_devices)); pxa_set_ac97_info(NULL); pxa_set_ficp_info(&e7xx_ficp_platform_data); @@ -733,6 +739,7 @@ static void __init e750_init(void) clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name, "GPIO11_CLK", NULL), eseries_get_tmio_gpios(); + gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table); platform_add_devices(ARRAY_AND_SIZE(e750_devices)); pxa_set_ac97_info(NULL); pxa_set_ficp_info(&e7xx_ficp_platform_data); @@ -888,18 +895,20 @@ static struct platform_device e800_fb_device = { /* --------------------------- UDC definitions --------------------------- */ -static struct gpio_vbus_mach_info e800_udc_info = { - .gpio_vbus = GPIO_E800_USB_DISC, - .gpio_pullup = GPIO_E800_USB_PULLUP, - .gpio_pullup_inverted = 1 +static struct gpiod_lookup_table e800_gpio_vbus_gpiod_table = { + .dev_id = "gpio-vbus", + .table = { + GPIO_LOOKUP("gpio-pxa", GPIO_E800_USB_DISC, + "vbus", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-pxa", GPIO_E800_USB_PULLUP, + "pullup", GPIO_ACTIVE_LOW), + { }, + }, }; static struct platform_device e800_gpio_vbus = { .name = "gpio-vbus", .id = -1, - .dev = { - .platform_data = &e800_udc_info, - }, }; @@ -949,6 +958,7 @@ static void __init e800_init(void) clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name, "GPIO11_CLK", NULL), eseries_get_tmio_gpios(); + gpiod_add_lookup_table(&e800_gpio_vbus_gpiod_table); platform_add_devices(ARRAY_AND_SIZE(e800_devices)); pxa_set_ac97_info(NULL); } diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c index 4b4589cf431f..49dd618b10f7 100644 --- a/arch/arm/mach-pxa/gumstix.c +++ b/arch/arm/mach-pxa/gumstix.c @@ -20,10 +20,10 @@ #include <linux/delay.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <linux/gpio/machine.h> #include <linux/gpio.h> #include <linux/err.h> #include <linux/clk.h> -#include <linux/usb/gpio_vbus.h> #include <asm/setup.h> #include <asm/memory.h> @@ -101,21 +101,25 @@ static void __init gumstix_mmc_init(void) #endif #ifdef CONFIG_USB_PXA25X -static struct gpio_vbus_mach_info gumstix_udc_info = { - .gpio_vbus = GPIO_GUMSTIX_USB_GPIOn, - .gpio_pullup = GPIO_GUMSTIX_USB_GPIOx, +static struct gpiod_lookup_table gumstix_gpio_vbus_gpiod_table = { + .dev_id = "gpio-vbus", + .table = { + GPIO_LOOKUP("gpio-pxa", GPIO_GUMSTIX_USB_GPIOn, + "vbus", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-pxa", GPIO_GUMSTIX_USB_GPIOx, + "pullup", GPIO_ACTIVE_HIGH), + { }, + }, }; static struct platform_device gumstix_gpio_vbus = { .name = "gpio-vbus", .id = -1, - .dev = { - .platform_data = &gumstix_udc_info, - }, }; static void __init gumstix_udc_init(void) { + gpiod_add_lookup_table(&gumstix_gpio_vbus_gpiod_table); platform_device_register(&gumstix_gpio_vbus); } #else diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index 311268d186ab..238a751a8797 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -34,7 +34,6 @@ #include <linux/spi/ads7846.h> #include <linux/spi/spi.h> #include <linux/spi/pxa2xx_spi.h> -#include <linux/usb/gpio_vbus.h> #include <linux/platform_data/i2c-pxa.h> #include <mach/hardware.h> @@ -578,18 +577,24 @@ static struct pwm_lookup hx4700_pwm_lookup[] = { * USB "Transceiver" */ -static struct gpio_vbus_mach_info gpio_vbus_info = { - .gpio_pullup = GPIO76_HX4700_USBC_PUEN, - .gpio_vbus = GPIOD14_nUSBC_DETECT, - .gpio_vbus_inverted = 1, +static struct gpiod_lookup_table gpio_vbus_gpiod_table = { + .dev_id = "gpio-vbus", + .table = { + /* This GPIO is on ASIC3 */ + GPIO_LOOKUP("asic3", + /* Convert to a local offset on the ASIC3 */ + GPIOD14_nUSBC_DETECT - HX4700_ASIC3_GPIO_BASE, + "vbus", GPIO_ACTIVE_LOW), + /* This one is on the primary SOC GPIO */ + GPIO_LOOKUP("gpio-pxa", GPIO76_HX4700_USBC_PUEN, + "pullup", GPIO_ACTIVE_HIGH), + { }, + }, }; static struct platform_device gpio_vbus = { .name = "gpio-vbus", .id = -1, - .dev = { - .platform_data = &gpio_vbus_info, - }, }; static struct pxa2xx_udc_mach_info hx4700_udc_info; @@ -883,6 +888,7 @@ static void __init hx4700_init(void) pxa_set_stuart_info(NULL); gpiod_add_lookup_table(&bq24022_gpiod_table); + gpiod_add_lookup_table(&gpio_vbus_gpiod_table); platform_add_devices(devices, ARRAY_SIZE(devices)); pwm_add_table(hx4700_pwm_lookup, ARRAY_SIZE(hx4700_pwm_lookup)); diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 868dc0cf4859..5d0591f93f4d 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -27,7 +27,6 @@ #include <linux/regulator/fixed.h> #include <linux/regulator/gpio-regulator.h> #include <linux/regulator/machine.h> -#include <linux/usb/gpio_vbus.h> #include <linux/platform_data/i2c-pxa.h> #include <mach/hardware.h> @@ -506,9 +505,20 @@ static struct resource gpio_vbus_resource = { .end = IRQ_MAGICIAN_VBUS, }; -static struct gpio_vbus_mach_info gpio_vbus_info = { - .gpio_pullup = GPIO27_MAGICIAN_USBC_PUEN, - .gpio_vbus = EGPIO_MAGICIAN_CABLE_VBUS, +static struct gpiod_lookup_table gpio_vbus_gpiod_table = { + .dev_id = "gpio-vbus", + .table = { + /* + * EGPIO on register 4 index 1, the second EGPIO chip + * starts at register 4 so this will be at index 1 on that + * chip. + */ + GPIO_LOOKUP("htc-egpio-1", 1, + "vbus", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-pxa", GPIO27_MAGICIAN_USBC_PUEN, + "pullup", GPIO_ACTIVE_HIGH), + { }, + }, }; static struct platform_device gpio_vbus = { @@ -516,9 +526,6 @@ static struct platform_device gpio_vbus = { .id = -1, .num_resources = 1, .resource = &gpio_vbus_resource, - .dev = { - .platform_data = &gpio_vbus_info, - }, }; /* @@ -1032,6 +1039,7 @@ static void __init magician_init(void) ARRAY_SIZE(pwm_backlight_supply), 5000000); gpiod_add_lookup_table(&bq24022_gpiod_table); + gpiod_add_lookup_table(&gpio_vbus_gpiod_table); platform_add_devices(ARRAY_AND_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index c360023a989c..0b8bae9610f1 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -24,7 +24,6 @@ #include <linux/power_supply.h> #include <linux/wm97xx.h> #include <linux/mtd/physmap.h> -#include <linux/usb/gpio_vbus.h> #include <linux/reboot.h> #include <linux/regulator/fixed.h> #include <linux/regulator/max1586.h> @@ -368,10 +367,13 @@ static struct pxa2xx_udc_mach_info mioa701_udc_info = { .gpio_pullup = GPIO22_USB_ENABLE, }; -struct gpio_vbus_mach_info gpio_vbus_data = { - .gpio_vbus = GPIO13_nUSB_DETECT, - .gpio_vbus_inverted = 1, - .gpio_pullup = -1, +static struct gpiod_lookup_table gpio_vbus_gpiod_table = { + .dev_id = "gpio-vbus", + .table = { + GPIO_LOOKUP("gpio-pxa", GPIO13_nUSB_DETECT, + "vbus", GPIO_ACTIVE_LOW), + { }, + }, }; /* @@ -677,7 +679,7 @@ MIO_SIMPLE_DEV(mioa701_led, "leds-gpio", &gpio_led_info) MIO_SIMPLE_DEV(pxa2xx_pcm, "pxa2xx-pcm", NULL) MIO_SIMPLE_DEV(mioa701_sound, "mioa701-wm9713", NULL) MIO_SIMPLE_DEV(mioa701_board, "mioa701-board", NULL) -MIO_SIMPLE_DEV(gpio_vbus, "gpio-vbus", &gpio_vbus_data); +MIO_SIMPLE_DEV(gpio_vbus, "gpio-vbus", NULL); static struct platform_device *devices[] __initdata = { &mioa701_gpio_keys, @@ -750,6 +752,7 @@ static void __init mioa701_machine_init(void) pxa_set_ac97_info(&mioa701_ac97_info); pm_power_off = mioa701_poweroff; pwm_add_table(mioa701_pwm_lookup, ARRAY_SIZE(mioa701_pwm_lookup)); + gpiod_add_lookup_table(&gpio_vbus_gpiod_table); platform_add_devices(devices, ARRAY_SIZE(devices)); gsm_init(); diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c index 3ad0b3915ae1..b600b63af3a6 100644 --- a/arch/arm/mach-pxa/palm27x.c +++ b/arch/arm/mach-pxa/palm27x.c @@ -13,10 +13,10 @@ #include <linux/pda_power.h> #include <linux/pwm.h> #include <linux/pwm_backlight.h> +#include <linux/gpio/machine.h> #include <linux/gpio.h> #include <linux/wm97xx.h> #include <linux/power_supply.h> -#include <linux/usb/gpio_vbus.h> #include <linux/regulator/max1586.h> #include <linux/platform_data/i2c-pxa.h> @@ -159,32 +159,32 @@ void __init palm27x_lcd_init(int power, struct pxafb_mode_info *mode) ******************************************************************************/ #if defined(CONFIG_USB_PXA27X) || \ defined(CONFIG_USB_PXA27X_MODULE) -static struct gpio_vbus_mach_info palm27x_udc_info = { - .gpio_vbus_inverted = 1, + +/* The actual GPIO offsets get filled in in the palm27x_udc_init() call */ +static struct gpiod_lookup_table palm27x_udc_gpiod_table = { + .dev_id = "gpio-vbus", + .table = { + GPIO_LOOKUP("gpio-pxa", 0, + "vbus", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-pxa", 0, + "pullup", GPIO_ACTIVE_HIGH), + { }, + }, }; static struct platform_device palm27x_gpio_vbus = { .name = "gpio-vbus", .id = -1, - .dev = { - .platform_data = &palm27x_udc_info, - }, }; void __init palm27x_udc_init(int vbus, int pullup, int vbus_inverted) { - palm27x_udc_info.gpio_vbus = vbus; - palm27x_udc_info.gpio_pullup = pullup; - - palm27x_udc_info.gpio_vbus_inverted = vbus_inverted; - - if (!gpio_request(pullup, "USB Pullup")) { - gpio_direction_output(pullup, - palm27x_udc_info.gpio_vbus_inverted); - gpio_free(pullup); - } else - return; + palm27x_udc_gpiod_table.table[0].chip_hwnum = vbus; + palm27x_udc_gpiod_table.table[1].chip_hwnum = pullup; + if (vbus_inverted) + palm27x_udc_gpiod_table.table[0].flags = GPIO_ACTIVE_LOW; + gpiod_add_lookup_table(&palm27x_udc_gpiod_table); platform_device_register(&palm27x_gpio_vbus); } #endif diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index 902403367786..7c7cbb4e677e 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -23,7 +23,6 @@ #include <linux/gpio.h> #include <linux/wm97xx.h> #include <linux/power_supply.h> -#include <linux/usb/gpio_vbus.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index f52bd155e825..fda9deaaae02 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -23,7 +23,6 @@ #include <linux/power_supply.h> #include <linux/gpio_keys.h> #include <linux/mtd/physmap.h> -#include <linux/usb/gpio_vbus.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -319,22 +318,25 @@ static inline void palmtc_mkp_init(void) {} * UDC ******************************************************************************/ #if defined(CONFIG_USB_PXA25X)||defined(CONFIG_USB_PXA25X_MODULE) -static struct gpio_vbus_mach_info palmtc_udc_info = { - .gpio_vbus = GPIO_NR_PALMTC_USB_DETECT_N, - .gpio_vbus_inverted = 1, - .gpio_pullup = GPIO_NR_PALMTC_USB_POWER, +static struct gpiod_lookup_table palmtc_udc_gpiod_table = { + .dev_id = "gpio-vbus", + .table = { + GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_USB_DETECT_N, + "vbus", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_USB_POWER, + "pullup", GPIO_ACTIVE_HIGH), + { }, + }, }; static struct platform_device palmtc_gpio_vbus = { .name = "gpio-vbus", .id = -1, - .dev = { - .platform_data = &palmtc_udc_info, - }, }; static void __init palmtc_udc_init(void) { + gpiod_add_lookup_table(&palmtc_udc_gpiod_table); platform_device_register(&palmtc_gpio_vbus); }; #else diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c index a92b9665f425..7171014fd311 100644 --- a/arch/arm/mach-pxa/palmte2.c +++ b/arch/arm/mach-pxa/palmte2.c @@ -23,7 +23,6 @@ #include <linux/gpio.h> #include <linux/wm97xx.h> #include <linux/power_supply.h> -#include <linux/usb/gpio_vbus.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -201,18 +200,20 @@ static struct pxaficp_platform_data palmte2_ficp_platform_data = { /****************************************************************************** * UDC ******************************************************************************/ -static struct gpio_vbus_mach_info palmte2_udc_info = { - .gpio_vbus = GPIO_NR_PALMTE2_USB_DETECT_N, - .gpio_vbus_inverted = 1, - .gpio_pullup = GPIO_NR_PALMTE2_USB_PULLUP, +static struct gpiod_lookup_table palmte2_udc_gpiod_table = { + .dev_id = "gpio-vbus", + .table = { + GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTE2_USB_DETECT_N, + "vbus", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTE2_USB_PULLUP, + "pullup", GPIO_ACTIVE_HIGH), + { }, + }, }; static struct platform_device palmte2_gpio_vbus = { .name = "gpio-vbus", .id = -1, - .dev = { - .platform_data = &palmte2_udc_info, - }, }; /****************************************************************************** @@ -368,6 +369,7 @@ static void __init palmte2_init(void) pxa_set_ficp_info(&palmte2_ficp_platform_data); pwm_add_table(palmte2_pwm_lookup, ARRAY_SIZE(palmte2_pwm_lookup)); + gpiod_add_lookup_table(&palmte2_udc_gpiod_table); platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index 926593ecf1c9..07332c92c9f7 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -23,7 +23,6 @@ #include <linux/gpio.h> #include <linux/wm97xx.h> #include <linux/power_supply.h> -#include <linux/usb/gpio_vbus.h> #include <linux/mtd/platnand.h> #include <linux/mtd/mtd.h> #include <linux/mtd/physmap.h> diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c index 77fe2e367324..4df443943579 100644 --- a/arch/arm/mach-pxa/palmz72.c +++ b/arch/arm/mach-pxa/palmz72.c @@ -25,7 +25,6 @@ #include <linux/gpio.h> #include <linux/wm97xx.h> #include <linux/power_supply.h> -#include <linux/usb/gpio_vbus.h> #include <linux/platform_data/i2c-gpio.h> #include <linux/gpio/machine.h> diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 4e13893edeb9..3d2c108e911e 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -33,7 +33,6 @@ #include <linux/spi/pxa2xx_spi.h> #include <linux/input/matrix_keypad.h> #include <linux/platform_data/i2c-pxa.h> -#include <linux/usb/gpio_vbus.h> #include <linux/reboot.h> #include <linux/memblock.h> @@ -240,18 +239,20 @@ static struct scoop_pcmcia_config tosa_pcmcia_config = { /* * USB Device Controller */ -static struct gpio_vbus_mach_info tosa_udc_info = { - .gpio_pullup = TOSA_GPIO_USB_PULLUP, - .gpio_vbus = TOSA_GPIO_USB_IN, - .gpio_vbus_inverted = 1, +static struct gpiod_lookup_table tosa_udc_gpiod_table = { + .dev_id = "gpio-vbus", + .table = { + GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_USB_IN, + "vbus", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_USB_PULLUP, + "pullup", GPIO_ACTIVE_HIGH), + { }, + }, }; static struct platform_device tosa_gpio_vbus = { .name = "gpio-vbus", .id = -1, - .dev = { - .platform_data = &tosa_udc_info, - }, }; /* @@ -949,6 +950,7 @@ static void __init tosa_init(void) clk_add_alias("CLK_CK3P6MI", tc6393xb_device.name, "GPIO11_CLK", NULL); + gpiod_add_lookup_table(&tosa_udc_gpiod_table); platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c index 26a5ebc00069..14505e83479e 100644 --- a/arch/arm/mach-pxa/vpac270.c +++ b/arch/arm/mach-pxa/vpac270.c @@ -14,7 +14,6 @@ #include <linux/leds.h> #include <linux/gpio.h> #include <linux/gpio/machine.h> -#include <linux/usb/gpio_vbus.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> @@ -352,17 +351,18 @@ static inline void vpac270_uhc_init(void) {} * USB Gadget ******************************************************************************/ #if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE) -static struct gpio_vbus_mach_info vpac270_gpio_vbus_info = { - .gpio_vbus = GPIO41_VPAC270_UDC_DETECT, - .gpio_pullup = -1, +static struct gpiod_lookup_table vpac270_gpio_vbus_gpiod_table = { + .dev_id = "gpio-vbus", + .table = { + GPIO_LOOKUP("gpio-pxa", GPIO41_VPAC270_UDC_DETECT, + "vbus", GPIO_ACTIVE_HIGH), + { }, + }, }; static struct platform_device vpac270_gpio_vbus = { .name = "gpio-vbus", .id = -1, - .dev = { - .platform_data = &vpac270_gpio_vbus_info, - }, }; static void vpac270_udc_command(int cmd) @@ -381,6 +381,7 @@ static struct pxa2xx_udc_mach_info vpac270_udc_info __initdata = { static void __init vpac270_udc_init(void) { pxa_set_udc_info(&vpac270_udc_info); + gpiod_add_lookup_table(&vpac270_gpio_vbus_gpiod_table); platform_device_register(&vpac270_gpio_vbus); } #else diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c index 951208f168e7..829d5dbd69ee 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq.c +++ b/arch/arm/mach-s3c64xx/mach-smartq.c @@ -13,7 +13,6 @@ #include <linux/serial_core.h> #include <linux/serial_s3c.h> #include <linux/spi/spi_gpio.h> -#include <linux/usb/gpio_vbus.h> #include <linux/platform_data/s3c-hsotg.h> #include <asm/mach-types.h> @@ -124,15 +123,16 @@ static struct s3c2410_hcd_info smartq_usb_host_info = { .enable_oc = smartq_usb_host_enableoc, }; -static struct gpio_vbus_mach_info smartq_usb_otg_vbus_pdata = { - .gpio_vbus = S3C64XX_GPL(9), - .gpio_pullup = -1, - .gpio_vbus_inverted = true, +static struct gpiod_lookup_table smartq_usb_otg_vbus_gpiod_table = { + .dev_id = "gpio-vbus", + .table = { + GPIO_LOOKUP("GPL", 9, "vbus", GPIO_ACTIVE_LOW), + { }, + }, }; static struct platform_device smartq_usb_otg_vbus_dev = { .name = "gpio-vbus", - .dev.platform_data = &smartq_usb_otg_vbus_pdata, }; static struct pwm_lookup smartq_pwm_lookup[] = { @@ -418,6 +418,7 @@ void __init smartq_machine_init(void) pwm_add_table(smartq_pwm_lookup, ARRAY_SIZE(smartq_pwm_lookup)); gpiod_add_lookup_table(&smartq_lcd_control_gpiod_table); + gpiod_add_lookup_table(&smartq_usb_otg_vbus_gpiod_table); platform_add_devices(smartq_devices, ARRAY_SIZE(smartq_devices)); gpiod_add_lookup_table(&smartq_audio_gpios); diff --git a/drivers/Makefile b/drivers/Makefile index aaef17cc6512..31cf17dee252 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -171,7 +171,7 @@ obj-$(CONFIG_POWERCAP) += powercap/ obj-$(CONFIG_MCB) += mcb/ obj-$(CONFIG_PERF_EVENTS) += perf/ obj-$(CONFIG_RAS) += ras/ -obj-$(CONFIG_THUNDERBOLT) += thunderbolt/ +obj-$(CONFIG_USB4) += thunderbolt/ obj-$(CONFIG_CORESIGHT) += hwtracing/coresight/ obj-y += hwtracing/intel_th/ obj-$(CONFIG_STM) += hwtracing/stm/ diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index dee79588d2b1..25a8f9387d5a 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -532,12 +532,12 @@ config FUJITSU_ES This driver provides support for Extended Socket network device on Extended Partitioning of FUJITSU PRIMEQUEST 2000 E2 series. -config THUNDERBOLT_NET - tristate "Networking over Thunderbolt cable" - depends on THUNDERBOLT && INET +config USB4_NET + tristate "Networking over USB4 and Thunderbolt cables" + depends on USB4 && INET help - Select this if you want to create network between two - computers over a Thunderbolt cable. The driver supports Apple + Select this if you want to create network between two computers + over a USB4 and Thunderbolt cables. The driver supports Apple ThunderboltIP protocol and allows communication with any host supporting the same protocol including Windows and macOS. diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 953b7c12f0b0..71b88ffc5587 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -77,6 +77,6 @@ obj-$(CONFIG_NTB_NETDEV) += ntb_netdev.o obj-$(CONFIG_FUJITSU_ES) += fjes/ thunderbolt-net-y += thunderbolt.o -obj-$(CONFIG_THUNDERBOLT_NET) += thunderbolt-net.o +obj-$(CONFIG_USB4_NET) += thunderbolt-net.o obj-$(CONFIG_NETDEVSIM) += netdevsim/ obj-$(CONFIG_NET_FAILOVER) += net_failover.o diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 0263db2ac874..b3ed94b98d9b 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -69,5 +69,6 @@ source "drivers/phy/socionext/Kconfig" source "drivers/phy/st/Kconfig" source "drivers/phy/tegra/Kconfig" source "drivers/phy/ti/Kconfig" +source "drivers/phy/intel/Kconfig" endmenu diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index c96a1afc95bd..310c149a9df5 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -18,6 +18,7 @@ obj-y += broadcom/ \ cadence/ \ freescale/ \ hisilicon/ \ + intel/ \ lantiq/ \ marvell/ \ motorola/ \ diff --git a/drivers/phy/allwinner/Kconfig b/drivers/phy/allwinner/Kconfig index 3dab79e9d52b..e760d89d3976 100644 --- a/drivers/phy/allwinner/Kconfig +++ b/drivers/phy/allwinner/Kconfig @@ -48,7 +48,8 @@ config PHY_SUN9I_USB config PHY_SUN50I_USB3 tristate "Allwinner H6 SoC USB3 PHY driver" - depends on ARCH_SUNXI && HAS_IOMEM && OF + depends on ARCH_SUNXI || COMPILE_TEST + depends on HAS_IOMEM && OF depends on RESET_CONTROLLER select GENERIC_PHY help diff --git a/drivers/phy/broadcom/Kconfig b/drivers/phy/broadcom/Kconfig index d3d983c128ea..b29f11c19155 100644 --- a/drivers/phy/broadcom/Kconfig +++ b/drivers/phy/broadcom/Kconfig @@ -50,7 +50,7 @@ config PHY_BCM_NS_USB3 config PHY_NS2_PCIE tristate "Broadcom Northstar2 PCIe PHY driver" - depends on OF && MDIO_BUS_MUX_BCM_IPROC + depends on (OF && MDIO_BUS_MUX_BCM_IPROC) || (COMPILE_TEST && MDIO_BUS) select GENERIC_PHY default ARCH_BCM_IPROC help @@ -83,7 +83,7 @@ config PHY_BRCM_SATA config PHY_BRCM_USB tristate "Broadcom STB USB PHY driver" - depends on ARCH_BRCMSTB + depends on ARCH_BRCMSTB || COMPILE_TEST depends on OF select GENERIC_PHY select SOC_BRCMSTB diff --git a/drivers/phy/broadcom/Makefile b/drivers/phy/broadcom/Makefile index f453c7d3ffff..c78de546135c 100644 --- a/drivers/phy/broadcom/Makefile +++ b/drivers/phy/broadcom/Makefile @@ -8,7 +8,7 @@ obj-$(CONFIG_PHY_NS2_USB_DRD) += phy-bcm-ns2-usbdrd.o obj-$(CONFIG_PHY_BRCM_SATA) += phy-brcm-sata.o obj-$(CONFIG_PHY_BRCM_USB) += phy-brcm-usb-dvr.o -phy-brcm-usb-dvr-objs := phy-brcm-usb.o phy-brcm-usb-init.o +phy-brcm-usb-dvr-objs := phy-brcm-usb.o phy-brcm-usb-init.o phy-brcm-usb-init-synopsys.o obj-$(CONFIG_PHY_BCM_SR_PCIE) += phy-bcm-sr-pcie.o obj-$(CONFIG_PHY_BCM_SR_USB) += phy-bcm-sr-usb.o diff --git a/drivers/phy/broadcom/phy-brcm-sata.c b/drivers/phy/broadcom/phy-brcm-sata.c index 50ac75bbb0c9..4710cfcc3037 100644 --- a/drivers/phy/broadcom/phy-brcm-sata.c +++ b/drivers/phy/broadcom/phy-brcm-sata.c @@ -33,6 +33,7 @@ #define SATA_PHY_CTRL_REG_28NM_SPACE_SIZE 0x8 enum brcm_sata_phy_version { + BRCM_SATA_PHY_STB_16NM, BRCM_SATA_PHY_STB_28NM, BRCM_SATA_PHY_STB_40NM, BRCM_SATA_PHY_IPROC_NS2, @@ -104,10 +105,13 @@ enum sata_phy_regs { PLL1_ACTRL5 = 0x85, PLL1_ACTRL6 = 0x86, PLL1_ACTRL7 = 0x87, + PLL1_ACTRL8 = 0x88, TX_REG_BANK = 0x070, TX_ACTRL0 = 0x80, TX_ACTRL0_TXPOL_FLIP = BIT(6), + TX_ACTRL5 = 0x85, + TX_ACTRL5_SSC_EN = BIT(11), AEQRX_REG_BANK_0 = 0xd0, AEQ_CONTROL1 = 0x81, @@ -116,6 +120,7 @@ enum sata_phy_regs { AEQ_FRC_EQ = 0x83, AEQ_FRC_EQ_FORCE = BIT(0), AEQ_FRC_EQ_FORCE_VAL = BIT(1), + AEQ_RFZ_FRC_VAL = BIT(8), AEQRX_REG_BANK_1 = 0xe0, AEQRX_SLCAL0_CTRL0 = 0x82, AEQRX_SLCAL1_CTRL0 = 0x86, @@ -152,7 +157,28 @@ enum sata_phy_regs { TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK = 0x3ff, RXPMD_REG_BANK = 0x1c0, + RXPMD_RX_CDR_CONTROL1 = 0x81, + RXPMD_RX_PPM_VAL_MASK = 0x1ff, + RXPMD_RXPMD_EN_FRC = BIT(12), + RXPMD_RXPMD_EN_FRC_VAL = BIT(13), + RXPMD_RX_CDR_CDR_PROP_BW = 0x82, + RXPMD_G_CDR_PROP_BW_MASK = 0x7, + RXPMD_G1_CDR_PROP_BW_SHIFT = 0, + RXPMD_G2_CDR_PROP_BW_SHIFT = 3, + RXPMD_G3_CDR_PROB_BW_SHIFT = 6, + RXPMD_RX_CDR_CDR_ACQ_INTEG_BW = 0x83, + RXPMD_G_CDR_ACQ_INT_BW_MASK = 0x7, + RXPMD_G1_CDR_ACQ_INT_BW_SHIFT = 0, + RXPMD_G2_CDR_ACQ_INT_BW_SHIFT = 3, + RXPMD_G3_CDR_ACQ_INT_BW_SHIFT = 6, + RXPMD_RX_CDR_CDR_LOCK_INTEG_BW = 0x84, + RXPMD_G_CDR_LOCK_INT_BW_MASK = 0x7, + RXPMD_G1_CDR_LOCK_INT_BW_SHIFT = 0, + RXPMD_G2_CDR_LOCK_INT_BW_SHIFT = 3, + RXPMD_G3_CDR_LOCK_INT_BW_SHIFT = 6, RXPMD_RX_FREQ_MON_CONTROL1 = 0x87, + RXPMD_MON_CORRECT_EN = BIT(8), + RXPMD_MON_MARGIN_VAL_MASK = 0xff, }; enum sata_phy_ctrl_regs { @@ -166,6 +192,7 @@ static inline void __iomem *brcm_sata_pcb_base(struct brcm_sata_port *port) u32 size = 0; switch (priv->version) { + case BRCM_SATA_PHY_STB_16NM: case BRCM_SATA_PHY_STB_28NM: case BRCM_SATA_PHY_IPROC_NS2: case BRCM_SATA_PHY_DSL_28NM: @@ -287,6 +314,94 @@ static int brcm_stb_sata_init(struct brcm_sata_port *port) return brcm_stb_sata_rxaeq_init(port); } +static int brcm_stb_sata_16nm_ssc_init(struct brcm_sata_port *port) +{ + void __iomem *base = brcm_sata_pcb_base(port); + u32 tmp, value; + + /* Reduce CP tail current to 1/16th of its default value */ + brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL6, 0, 0x141); + + /* Turn off CP tail current boost */ + brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL8, 0, 0xc006); + + /* Set a specific AEQ equalizer value */ + tmp = AEQ_FRC_EQ_FORCE_VAL | AEQ_FRC_EQ_FORCE; + brcm_sata_phy_wr(base, AEQRX_REG_BANK_0, AEQ_FRC_EQ, + ~(tmp | AEQ_RFZ_FRC_VAL | + AEQ_FRC_EQ_VAL_MASK << AEQ_FRC_EQ_VAL_SHIFT), + tmp | 32 << AEQ_FRC_EQ_VAL_SHIFT); + + /* Set RX PPM val center frequency */ + if (port->ssc_en) + value = 0x52; + else + value = 0; + brcm_sata_phy_wr(base, RXPMD_REG_BANK, RXPMD_RX_CDR_CONTROL1, + ~RXPMD_RX_PPM_VAL_MASK, value); + + /* Set proportional loop bandwith Gen1/2/3 */ + tmp = RXPMD_G_CDR_PROP_BW_MASK << RXPMD_G1_CDR_PROP_BW_SHIFT | + RXPMD_G_CDR_PROP_BW_MASK << RXPMD_G2_CDR_PROP_BW_SHIFT | + RXPMD_G_CDR_PROP_BW_MASK << RXPMD_G3_CDR_PROB_BW_SHIFT; + if (port->ssc_en) + value = 2 << RXPMD_G1_CDR_PROP_BW_SHIFT | + 2 << RXPMD_G2_CDR_PROP_BW_SHIFT | + 2 << RXPMD_G3_CDR_PROB_BW_SHIFT; + else + value = 1 << RXPMD_G1_CDR_PROP_BW_SHIFT | + 1 << RXPMD_G2_CDR_PROP_BW_SHIFT | + 1 << RXPMD_G3_CDR_PROB_BW_SHIFT; + brcm_sata_phy_wr(base, RXPMD_REG_BANK, RXPMD_RX_CDR_CDR_PROP_BW, ~tmp, + value); + + /* Set CDR integral loop acquisition bandwidth for Gen1/2/3 */ + tmp = RXPMD_G_CDR_ACQ_INT_BW_MASK << RXPMD_G1_CDR_ACQ_INT_BW_SHIFT | + RXPMD_G_CDR_ACQ_INT_BW_MASK << RXPMD_G2_CDR_ACQ_INT_BW_SHIFT | + RXPMD_G_CDR_ACQ_INT_BW_MASK << RXPMD_G3_CDR_ACQ_INT_BW_SHIFT; + if (port->ssc_en) + value = 1 << RXPMD_G1_CDR_ACQ_INT_BW_SHIFT | + 1 << RXPMD_G2_CDR_ACQ_INT_BW_SHIFT | + 1 << RXPMD_G3_CDR_ACQ_INT_BW_SHIFT; + else + value = 0; + brcm_sata_phy_wr(base, RXPMD_REG_BANK, RXPMD_RX_CDR_CDR_ACQ_INTEG_BW, + ~tmp, value); + + /* Set CDR integral loop locking bandwidth to 1 for Gen 1/2/3 */ + tmp = RXPMD_G_CDR_LOCK_INT_BW_MASK << RXPMD_G1_CDR_LOCK_INT_BW_SHIFT | + RXPMD_G_CDR_LOCK_INT_BW_MASK << RXPMD_G2_CDR_LOCK_INT_BW_SHIFT | + RXPMD_G_CDR_LOCK_INT_BW_MASK << RXPMD_G3_CDR_LOCK_INT_BW_SHIFT; + if (port->ssc_en) + value = 1 << RXPMD_G1_CDR_LOCK_INT_BW_SHIFT | + 1 << RXPMD_G2_CDR_LOCK_INT_BW_SHIFT | + 1 << RXPMD_G3_CDR_LOCK_INT_BW_SHIFT; + else + value = 0; + brcm_sata_phy_wr(base, RXPMD_REG_BANK, RXPMD_RX_CDR_CDR_LOCK_INTEG_BW, + ~tmp, value); + + /* Set no guard band and clamp CDR */ + tmp = RXPMD_MON_CORRECT_EN | RXPMD_MON_MARGIN_VAL_MASK; + if (port->ssc_en) + value = 0x51; + else + value = 0; + brcm_sata_phy_wr(base, RXPMD_REG_BANK, RXPMD_RX_FREQ_MON_CONTROL1, + ~tmp, RXPMD_MON_CORRECT_EN | value); + + /* Turn on/off SSC */ + brcm_sata_phy_wr(base, TX_REG_BANK, TX_ACTRL5, ~TX_ACTRL5_SSC_EN, + port->ssc_en ? TX_ACTRL5_SSC_EN : 0); + + return 0; +} + +static int brcm_stb_sata_16nm_init(struct brcm_sata_port *port) +{ + return brcm_stb_sata_16nm_ssc_init(port); +} + /* NS2 SATA PLL1 defaults were characterized by H/W group */ #define NS2_PLL1_ACTRL2_MAGIC 0x1df8 #define NS2_PLL1_ACTRL3_MAGIC 0x2b00 @@ -544,6 +659,9 @@ static int brcm_sata_phy_init(struct phy *phy) struct brcm_sata_port *port = phy_get_drvdata(phy); switch (port->phy_priv->version) { + case BRCM_SATA_PHY_STB_16NM: + rc = brcm_stb_sata_16nm_init(port); + break; case BRCM_SATA_PHY_STB_28NM: case BRCM_SATA_PHY_STB_40NM: rc = brcm_stb_sata_init(port); @@ -601,6 +719,8 @@ static const struct phy_ops phy_ops = { }; static const struct of_device_id brcm_sata_phy_of_match[] = { + { .compatible = "brcm,bcm7216-sata-phy", + .data = (void *)BRCM_SATA_PHY_STB_16NM }, { .compatible = "brcm,bcm7445-sata-phy", .data = (void *)BRCM_SATA_PHY_STB_28NM }, { .compatible = "brcm,bcm7425-sata-phy", diff --git a/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c b/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c new file mode 100644 index 000000000000..456dc4a100c2 --- /dev/null +++ b/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c @@ -0,0 +1,414 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2018, Broadcom */ + +/* + * This module contains USB PHY initialization for power up and S3 resume + * for newer Synopsys based USB hardware first used on the bcm7216. + */ + +#include <linux/delay.h> +#include <linux/io.h> + +#include <linux/soc/brcmstb/brcmstb.h> +#include "phy-brcm-usb-init.h" + +#define PHY_LOCK_TIMEOUT_MS 200 + +/* Register definitions for syscon piarbctl registers */ +#define PIARBCTL_CAM 0x00 +#define PIARBCTL_SPLITTER 0x04 +#define PIARBCTL_MISC 0x08 +#define PIARBCTL_MISC_SECURE_MASK 0x80000000 +#define PIARBCTL_MISC_USB_SELECT_MASK 0x40000000 +#define PIARBCTL_MISC_USB_4G_SDRAM_MASK 0x20000000 +#define PIARBCTL_MISC_USB_PRIORITY_MASK 0x000f0000 +#define PIARBCTL_MISC_USB_MEM_PAGE_MASK 0x0000f000 +#define PIARBCTL_MISC_CAM1_MEM_PAGE_MASK 0x00000f00 +#define PIARBCTL_MISC_CAM0_MEM_PAGE_MASK 0x000000f0 +#define PIARBCTL_MISC_SATA_PRIORITY_MASK 0x0000000f + +#define PIARBCTL_MISC_USB_ONLY_MASK \ + (PIARBCTL_MISC_USB_SELECT_MASK | \ + PIARBCTL_MISC_USB_4G_SDRAM_MASK | \ + PIARBCTL_MISC_USB_PRIORITY_MASK | \ + PIARBCTL_MISC_USB_MEM_PAGE_MASK) + +/* Register definitions for the USB CTRL block */ +#define USB_CTRL_SETUP 0x00 +#define USB_CTRL_SETUP_STRAP_IPP_SEL_MASK 0x02000000 +#define USB_CTRL_SETUP_SCB2_EN_MASK 0x00008000 +#define USB_CTRL_SETUP_tca_drv_sel_MASK 0x01000000 +#define USB_CTRL_SETUP_SCB1_EN_MASK 0x00004000 +#define USB_CTRL_SETUP_SOFT_SHUTDOWN_MASK 0x00000200 +#define USB_CTRL_SETUP_IPP_MASK 0x00000020 +#define USB_CTRL_SETUP_IOC_MASK 0x00000010 +#define USB_CTRL_USB_PM 0x04 +#define USB_CTRL_USB_PM_USB_PWRDN_MASK 0x80000000 +#define USB_CTRL_USB_PM_SOFT_RESET_MASK 0x40000000 +#define USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK 0x00800000 +#define USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK 0x00400000 +#define USB_CTRL_USB_PM_STATUS 0x08 +#define USB_CTRL_USB_DEVICE_CTL1 0x10 +#define USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK 0x00000003 +#define USB_CTRL_TEST_PORT_CTL 0x30 +#define USB_CTRL_TEST_PORT_CTL_TPOUT_SEL_MASK 0x000000ff +#define USB_CTRL_TEST_PORT_CTL_TPOUT_SEL_PME_GEN_MASK 0x0000002e +#define USB_CTRL_TP_DIAG1 0x34 +#define USB_CTLR_TP_DIAG1_wake_MASK 0x00000002 +#define USB_CTRL_CTLR_CSHCR 0x50 +#define USB_CTRL_CTLR_CSHCR_ctl_pme_en_MASK 0x00040000 + +/* Register definitions for the USB_PHY block in 7211b0 */ +#define USB_PHY_PLL_CTL 0x00 +#define USB_PHY_PLL_CTL_PLL_RESETB_MASK 0x40000000 +#define USB_PHY_PLL_LDO_CTL 0x08 +#define USB_PHY_PLL_LDO_CTL_AFE_CORERDY_MASK 0x00000004 +#define USB_PHY_PLL_LDO_CTL_AFE_LDO_PWRDWNB_MASK 0x00000002 +#define USB_PHY_PLL_LDO_CTL_AFE_BG_PWRDWNB_MASK 0x00000001 +#define USB_PHY_UTMI_CTL_1 0x04 +#define USB_PHY_UTMI_CTL_1_POWER_UP_FSM_EN_MASK 0x00000800 +#define USB_PHY_UTMI_CTL_1_PHY_MODE_MASK 0x0000000c +#define USB_PHY_UTMI_CTL_1_PHY_MODE_SHIFT 2 +#define USB_PHY_IDDQ 0x1c +#define USB_PHY_IDDQ_phy_iddq_MASK 0x00000001 +#define USB_PHY_STATUS 0x20 +#define USB_PHY_STATUS_pll_lock_MASK 0x00000001 + +/* Register definitions for the MDIO registers in the DWC2 block of + * the 7211b0. + * NOTE: The PHY's MDIO registers are only accessible through the + * legacy DesignWare USB controller even though it's not being used. + */ +#define USB_GMDIOCSR 0 +#define USB_GMDIOGEN 4 + +/* Register definitions for the BDC EC block in 7211b0 */ +#define BDC_EC_AXIRDA 0x0c +#define BDC_EC_AXIRDA_RTS_MASK 0xf0000000 +#define BDC_EC_AXIRDA_RTS_SHIFT 28 + + +static void usb_mdio_write_7211b0(struct brcm_usb_init_params *params, + uint8_t addr, uint16_t data) +{ + void __iomem *usb_mdio = params->regs[BRCM_REGS_USB_MDIO]; + + addr &= 0x1f; /* 5-bit address */ + brcm_usb_writel(0xffffffff, usb_mdio + USB_GMDIOGEN); + while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31)) + ; + brcm_usb_writel(0x59020000 | (addr << 18) | data, + usb_mdio + USB_GMDIOGEN); + while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31)) + ; + brcm_usb_writel(0x00000000, usb_mdio + USB_GMDIOGEN); + while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31)) + ; +} + +static uint16_t __maybe_unused usb_mdio_read_7211b0( + struct brcm_usb_init_params *params, uint8_t addr) +{ + void __iomem *usb_mdio = params->regs[BRCM_REGS_USB_MDIO]; + + addr &= 0x1f; /* 5-bit address */ + brcm_usb_writel(0xffffffff, usb_mdio + USB_GMDIOGEN); + while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31)) + ; + brcm_usb_writel(0x69020000 | (addr << 18), usb_mdio + USB_GMDIOGEN); + while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31)) + ; + brcm_usb_writel(0x00000000, usb_mdio + USB_GMDIOGEN); + while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31)) + ; + return brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & 0xffff; +} + +static void usb2_eye_fix_7211b0(struct brcm_usb_init_params *params) +{ + /* select bank */ + usb_mdio_write_7211b0(params, 0x1f, 0x80a0); + + /* Set the eye */ + usb_mdio_write_7211b0(params, 0x0a, 0xc6a0); +} + +static void xhci_soft_reset(struct brcm_usb_init_params *params, + int on_off) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + + /* Assert reset */ + if (on_off) + USB_CTRL_UNSET(ctrl, USB_PM, XHC_SOFT_RESETB); + /* De-assert reset */ + else + USB_CTRL_SET(ctrl, USB_PM, XHC_SOFT_RESETB); +} + +static void usb_init_ipp(struct brcm_usb_init_params *params) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + u32 reg; + u32 orig_reg; + + pr_debug("%s\n", __func__); + + orig_reg = reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP)); + if (params->ipp != 2) + /* override ipp strap pin (if it exits) */ + reg &= ~(USB_CTRL_MASK(SETUP, STRAP_IPP_SEL)); + + /* Override the default OC and PP polarity */ + reg &= ~(USB_CTRL_MASK(SETUP, IPP) | USB_CTRL_MASK(SETUP, IOC)); + if (params->ioc) + reg |= USB_CTRL_MASK(SETUP, IOC); + if (params->ipp == 1) + reg |= USB_CTRL_MASK(SETUP, IPP); + brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP)); + + /* + * If we're changing IPP, make sure power is off long enough + * to turn off any connected devices. + */ + if ((reg ^ orig_reg) & USB_CTRL_MASK(SETUP, IPP)) + msleep(50); +} + +static void syscon_piarbctl_init(struct regmap *rmap) +{ + /* Switch from legacy USB OTG controller to new STB USB controller */ + regmap_update_bits(rmap, PIARBCTL_MISC, PIARBCTL_MISC_USB_ONLY_MASK, + PIARBCTL_MISC_USB_SELECT_MASK | + PIARBCTL_MISC_USB_4G_SDRAM_MASK); +} + +static void usb_init_common(struct brcm_usb_init_params *params) +{ + u32 reg; + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + + pr_debug("%s\n", __func__); + + USB_CTRL_UNSET(ctrl, USB_PM, USB_PWRDN); + /* 1 millisecond - for USB clocks to settle down */ + usleep_range(1000, 2000); + + if (USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE)) { + reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); + reg &= ~USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE); + reg |= params->mode; + brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); + } + switch (params->mode) { + case USB_CTLR_MODE_HOST: + USB_CTRL_UNSET(ctrl, USB_PM, BDC_SOFT_RESETB); + break; + default: + USB_CTRL_UNSET(ctrl, USB_PM, BDC_SOFT_RESETB); + USB_CTRL_SET(ctrl, USB_PM, BDC_SOFT_RESETB); + break; + } +} + +static void usb_wake_enable_7211b0(struct brcm_usb_init_params *params, + bool enable) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + + if (enable) + USB_CTRL_SET(ctrl, CTLR_CSHCR, ctl_pme_en); + else + USB_CTRL_UNSET(ctrl, CTLR_CSHCR, ctl_pme_en); +} + +static void usb_init_common_7211b0(struct brcm_usb_init_params *params) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + void __iomem *usb_phy = params->regs[BRCM_REGS_USB_PHY]; + void __iomem *bdc_ec = params->regs[BRCM_REGS_BDC_EC]; + int timeout_ms = PHY_LOCK_TIMEOUT_MS; + u32 reg; + + if (params->syscon_piarbctl) + syscon_piarbctl_init(params->syscon_piarbctl); + + USB_CTRL_UNSET(ctrl, USB_PM, USB_PWRDN); + + usb_wake_enable_7211b0(params, false); + if (!params->wake_enabled) { + + /* undo possible suspend settings */ + brcm_usb_writel(0, usb_phy + USB_PHY_IDDQ); + reg = brcm_usb_readl(usb_phy + USB_PHY_PLL_CTL); + reg |= USB_PHY_PLL_CTL_PLL_RESETB_MASK; + brcm_usb_writel(reg, usb_phy + USB_PHY_PLL_CTL); + + /* temporarily enable FSM so PHY comes up properly */ + reg = brcm_usb_readl(usb_phy + USB_PHY_UTMI_CTL_1); + reg |= USB_PHY_UTMI_CTL_1_POWER_UP_FSM_EN_MASK; + brcm_usb_writel(reg, usb_phy + USB_PHY_UTMI_CTL_1); + } + + /* Init the PHY */ + reg = USB_PHY_PLL_LDO_CTL_AFE_CORERDY_MASK | + USB_PHY_PLL_LDO_CTL_AFE_LDO_PWRDWNB_MASK | + USB_PHY_PLL_LDO_CTL_AFE_BG_PWRDWNB_MASK; + brcm_usb_writel(reg, usb_phy + USB_PHY_PLL_LDO_CTL); + + /* wait for lock */ + while (timeout_ms-- > 0) { + reg = brcm_usb_readl(usb_phy + USB_PHY_STATUS); + if (reg & USB_PHY_STATUS_pll_lock_MASK) + break; + usleep_range(1000, 2000); + } + + /* Set the PHY_MODE */ + reg = brcm_usb_readl(usb_phy + USB_PHY_UTMI_CTL_1); + reg &= ~USB_PHY_UTMI_CTL_1_PHY_MODE_MASK; + reg |= params->mode << USB_PHY_UTMI_CTL_1_PHY_MODE_SHIFT; + brcm_usb_writel(reg, usb_phy + USB_PHY_UTMI_CTL_1); + + /* Fix the incorrect default */ + reg = brcm_usb_readl(ctrl + USB_CTRL_SETUP); + reg &= ~USB_CTRL_SETUP_tca_drv_sel_MASK; + brcm_usb_writel(reg, ctrl + USB_CTRL_SETUP); + + usb_init_common(params); + + /* + * The BDC controller will get occasional failures with + * the default "Read Transaction Size" of 6 (1024 bytes). + * Set it to 4 (256 bytes). + */ + if ((params->mode != USB_CTLR_MODE_HOST) && bdc_ec) { + reg = brcm_usb_readl(bdc_ec + BDC_EC_AXIRDA); + reg &= ~BDC_EC_AXIRDA_RTS_MASK; + reg |= (0x4 << BDC_EC_AXIRDA_RTS_SHIFT); + brcm_usb_writel(reg, bdc_ec + BDC_EC_AXIRDA); + } + + /* + * Disable FSM, otherwise the PHY will auto suspend when no + * device is connected and will be reset on resume. + */ + reg = brcm_usb_readl(usb_phy + USB_PHY_UTMI_CTL_1); + reg &= ~USB_PHY_UTMI_CTL_1_POWER_UP_FSM_EN_MASK; + brcm_usb_writel(reg, usb_phy + USB_PHY_UTMI_CTL_1); + + usb2_eye_fix_7211b0(params); +} + +static void usb_init_xhci(struct brcm_usb_init_params *params) +{ + pr_debug("%s\n", __func__); + + xhci_soft_reset(params, 0); +} + +static void usb_uninit_common(struct brcm_usb_init_params *params) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + + pr_debug("%s\n", __func__); + + USB_CTRL_SET(ctrl, USB_PM, USB_PWRDN); + +} + +static void usb_uninit_common_7211b0(struct brcm_usb_init_params *params) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + void __iomem *usb_phy = params->regs[BRCM_REGS_USB_PHY]; + u32 reg; + + pr_debug("%s\n", __func__); + + if (params->wake_enabled) { + USB_CTRL_SET(ctrl, TEST_PORT_CTL, TPOUT_SEL_PME_GEN); + usb_wake_enable_7211b0(params, true); + } else { + USB_CTRL_SET(ctrl, USB_PM, USB_PWRDN); + brcm_usb_writel(0, usb_phy + USB_PHY_PLL_LDO_CTL); + reg = brcm_usb_readl(usb_phy + USB_PHY_PLL_CTL); + reg &= ~USB_PHY_PLL_CTL_PLL_RESETB_MASK; + brcm_usb_writel(reg, usb_phy + USB_PHY_PLL_CTL); + brcm_usb_writel(USB_PHY_IDDQ_phy_iddq_MASK, + usb_phy + USB_PHY_IDDQ); + } + +} + +static void usb_uninit_xhci(struct brcm_usb_init_params *params) +{ + + pr_debug("%s\n", __func__); + + if (!params->wake_enabled) + xhci_soft_reset(params, 1); +} + +static int usb_get_dual_select(struct brcm_usb_init_params *params) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + u32 reg = 0; + + pr_debug("%s\n", __func__); + + reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); + reg &= USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE); + return reg; +} + +static void usb_set_dual_select(struct brcm_usb_init_params *params, int mode) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + u32 reg; + + pr_debug("%s\n", __func__); + + reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); + reg &= ~USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE); + reg |= mode; + brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); +} + +static const struct brcm_usb_init_ops bcm7216_ops = { + .init_ipp = usb_init_ipp, + .init_common = usb_init_common, + .init_xhci = usb_init_xhci, + .uninit_common = usb_uninit_common, + .uninit_xhci = usb_uninit_xhci, + .get_dual_select = usb_get_dual_select, + .set_dual_select = usb_set_dual_select, +}; + +static const struct brcm_usb_init_ops bcm7211b0_ops = { + .init_ipp = usb_init_ipp, + .init_common = usb_init_common_7211b0, + .init_xhci = usb_init_xhci, + .uninit_common = usb_uninit_common_7211b0, + .uninit_xhci = usb_uninit_xhci, + .get_dual_select = usb_get_dual_select, + .set_dual_select = usb_set_dual_select, +}; + +void brcm_usb_dvr_init_7216(struct brcm_usb_init_params *params) +{ + + pr_debug("%s\n", __func__); + + params->family_name = "7216"; + params->ops = &bcm7216_ops; +} + +void brcm_usb_dvr_init_7211b0(struct brcm_usb_init_params *params) +{ + + pr_debug("%s\n", __func__); + + params->family_name = "7211"; + params->ops = &bcm7211b0_ops; + params->suspend_with_clocks = true; +} diff --git a/drivers/phy/broadcom/phy-brcm-usb-init.c b/drivers/phy/broadcom/phy-brcm-usb-init.c index 91b5b09589d6..9391ab42a12b 100644 --- a/drivers/phy/broadcom/phy-brcm-usb-init.c +++ b/drivers/phy/broadcom/phy-brcm-usb-init.c @@ -42,6 +42,7 @@ #define USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK 0x80000000 /* option */ #define USB_CTRL_EBRIDGE 0x0c #define USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK 0x00020000 /* option */ +#define USB_CTRL_EBRIDGE_EBR_SCB_SIZE_MASK 0x00000f80 /* option */ #define USB_CTRL_OBRIDGE 0x10 #define USB_CTRL_OBRIDGE_LS_KEEP_ALIVE_MASK 0x08000000 #define USB_CTRL_MDIO 0x14 @@ -57,6 +58,8 @@ #define USB_CTRL_USB_PM_SOFT_RESET_MASK 0x40000000 /* option */ #define USB_CTRL_USB_PM_USB20_HC_RESETB_MASK 0x30000000 /* option */ #define USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK 0x00300000 /* option */ +#define USB_CTRL_USB_PM_RMTWKUP_EN_MASK 0x00000001 +#define USB_CTRL_USB_PM_STATUS 0x38 #define USB_CTRL_USB30_CTL1 0x60 #define USB_CTRL_USB30_CTL1_PHY3_PLL_SEQ_START_MASK 0x00000010 #define USB_CTRL_USB30_CTL1_PHY3_RESETB_MASK 0x00010000 @@ -126,10 +129,6 @@ enum { USB_CTRL_SELECTOR_COUNT, }; -#define USB_CTRL_REG(base, reg) ((void __iomem *)base + USB_CTRL_##reg) -#define USB_XHCI_EC_REG(base, reg) ((void __iomem *)base + USB_XHCI_EC_##reg) -#define USB_CTRL_MASK(reg, field) \ - USB_CTRL_##reg##_##field##_MASK #define USB_CTRL_MASK_FAMILY(params, reg, field) \ (params->usb_reg_bits_map[USB_CTRL_##reg##_##field##_SELECTOR]) @@ -140,13 +139,6 @@ enum { usb_ctrl_unset_family(params, USB_CTRL_##reg, \ USB_CTRL_##reg##_##field##_SELECTOR) -#define USB_CTRL_SET(base, reg, field) \ - usb_ctrl_set(USB_CTRL_REG(base, reg), \ - USB_CTRL_##reg##_##field##_MASK) -#define USB_CTRL_UNSET(base, reg, field) \ - usb_ctrl_unset(USB_CTRL_REG(base, reg), \ - USB_CTRL_##reg##_##field##_MASK) - #define MDIO_USB2 0 #define MDIO_USB3 BIT(31) @@ -176,6 +168,7 @@ static const struct id_to_type id_to_type_table[] = { { 0x33900000, BRCM_FAMILY_3390A0 }, { 0x72500010, BRCM_FAMILY_7250B0 }, { 0x72600000, BRCM_FAMILY_7260A0 }, + { 0x72550000, BRCM_FAMILY_7260A0 }, { 0x72680000, BRCM_FAMILY_7271A0 }, { 0x72710000, BRCM_FAMILY_7271A0 }, { 0x73640000, BRCM_FAMILY_7364A0 }, @@ -401,26 +394,14 @@ usb_reg_bits_map_table[BRCM_FAMILY_COUNT][USB_CTRL_SELECTOR_COUNT] = { }, }; -static inline u32 brcmusb_readl(void __iomem *addr) -{ - return readl(addr); -} - -static inline void brcmusb_writel(u32 val, void __iomem *addr) -{ - writel(val, addr); -} - static inline void usb_ctrl_unset_family(struct brcm_usb_init_params *params, u32 reg_offset, u32 field) { u32 mask; - void __iomem *reg; mask = params->usb_reg_bits_map[field]; - reg = params->ctrl_regs + reg_offset; - brcmusb_writel(brcmusb_readl(reg) & ~mask, reg); + brcm_usb_ctrl_unset(params->regs[BRCM_REGS_CTRL] + reg_offset, mask); }; static inline @@ -428,45 +409,27 @@ void usb_ctrl_set_family(struct brcm_usb_init_params *params, u32 reg_offset, u32 field) { u32 mask; - void __iomem *reg; mask = params->usb_reg_bits_map[field]; - reg = params->ctrl_regs + reg_offset; - brcmusb_writel(brcmusb_readl(reg) | mask, reg); + brcm_usb_ctrl_set(params->regs[BRCM_REGS_CTRL] + reg_offset, mask); }; -static inline void usb_ctrl_set(void __iomem *reg, u32 field) -{ - u32 value; - - value = brcmusb_readl(reg); - brcmusb_writel(value | field, reg); -} - -static inline void usb_ctrl_unset(void __iomem *reg, u32 field) -{ - u32 value; - - value = brcmusb_readl(reg); - brcmusb_writel(value & ~field, reg); -} - static u32 brcmusb_usb_mdio_read(void __iomem *ctrl_base, u32 reg, int mode) { u32 data; data = (reg << 16) | mode; - brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); + brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); data |= (1 << 24); - brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); + brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); data &= ~(1 << 24); /* wait for the 60MHz parallel to serial shifter */ usleep_range(10, 20); - brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); + brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); /* wait for the 60MHz parallel to serial shifter */ usleep_range(10, 20); - return brcmusb_readl(USB_CTRL_REG(ctrl_base, MDIO2)) & 0xffff; + return brcm_usb_readl(USB_CTRL_REG(ctrl_base, MDIO2)) & 0xffff; } static void brcmusb_usb_mdio_write(void __iomem *ctrl_base, u32 reg, @@ -475,14 +438,14 @@ static void brcmusb_usb_mdio_write(void __iomem *ctrl_base, u32 reg, u32 data; data = (reg << 16) | val | mode; - brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); + brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); data |= (1 << 25); - brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); + brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); data &= ~(1 << 25); /* wait for the 60MHz parallel to serial shifter */ usleep_range(10, 20); - brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); + brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO)); /* wait for the 60MHz parallel to serial shifter */ usleep_range(10, 20); } @@ -581,7 +544,7 @@ static void brcmusb_usb3_pll_54mhz(struct brcm_usb_init_params *params) { u32 ofs; int ii; - void __iomem *ctrl_base = params->ctrl_regs; + void __iomem *ctrl_base = params->regs[BRCM_REGS_CTRL]; /* * On newer B53 based SoC's, the reference clock for the @@ -662,7 +625,7 @@ static void brcmusb_usb3_ssc_enable(void __iomem *ctrl_base) static void brcmusb_usb3_phy_workarounds(struct brcm_usb_init_params *params) { - void __iomem *ctrl_base = params->ctrl_regs; + void __iomem *ctrl_base = params->regs[BRCM_REGS_CTRL]; brcmusb_usb3_pll_fix(ctrl_base); brcmusb_usb3_pll_54mhz(params); @@ -704,21 +667,21 @@ static void brcmusb_memc_fix(struct brcm_usb_init_params *params) static void brcmusb_usb3_otp_fix(struct brcm_usb_init_params *params) { - void __iomem *xhci_ec_base = params->xhci_ec_regs; + void __iomem *xhci_ec_base = params->regs[BRCM_REGS_XHCI_EC]; u32 val; if (params->family_id != 0x74371000 || !xhci_ec_base) return; - brcmusb_writel(0xa20c, USB_XHCI_EC_REG(xhci_ec_base, IRAADR)); - val = brcmusb_readl(USB_XHCI_EC_REG(xhci_ec_base, IRADAT)); + brcm_usb_writel(0xa20c, USB_XHCI_EC_REG(xhci_ec_base, IRAADR)); + val = brcm_usb_readl(USB_XHCI_EC_REG(xhci_ec_base, IRADAT)); /* set cfg_pick_ss_lock */ val |= (1 << 27); - brcmusb_writel(val, USB_XHCI_EC_REG(xhci_ec_base, IRADAT)); + brcm_usb_writel(val, USB_XHCI_EC_REG(xhci_ec_base, IRADAT)); /* Reset USB 3.0 PHY for workaround to take effect */ - USB_CTRL_UNSET(params->ctrl_regs, USB30_CTL1, PHY3_RESETB); - USB_CTRL_SET(params->ctrl_regs, USB30_CTL1, PHY3_RESETB); + USB_CTRL_UNSET(params->regs[BRCM_REGS_CTRL], USB30_CTL1, PHY3_RESETB); + USB_CTRL_SET(params->regs[BRCM_REGS_CTRL], USB30_CTL1, PHY3_RESETB); } static void brcmusb_xhci_soft_reset(struct brcm_usb_init_params *params, @@ -747,7 +710,7 @@ static void brcmusb_xhci_soft_reset(struct brcm_usb_init_params *params, * - default chip/rev. * NOTE: The minor rev is always ignored. */ -static enum brcm_family_type brcmusb_get_family_type( +static enum brcm_family_type get_family_type( struct brcm_usb_init_params *params) { int last_type = -1; @@ -775,9 +738,9 @@ static enum brcm_family_type brcmusb_get_family_type( return last_type; } -void brcm_usb_init_ipp(struct brcm_usb_init_params *params) +static void usb_init_ipp(struct brcm_usb_init_params *params) { - void __iomem *ctrl = params->ctrl_regs; + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; u32 reg; u32 orig_reg; @@ -791,7 +754,7 @@ void brcm_usb_init_ipp(struct brcm_usb_init_params *params) USB_CTRL_SET_FAMILY(params, USB30_CTL1, USB3_IPP); } - reg = brcmusb_readl(USB_CTRL_REG(ctrl, SETUP)); + reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP)); orig_reg = reg; if (USB_CTRL_MASK_FAMILY(params, SETUP, STRAP_CC_DRD_MODE_ENABLE_SEL)) /* Never use the strap, it's going away. */ @@ -799,8 +762,8 @@ void brcm_usb_init_ipp(struct brcm_usb_init_params *params) SETUP, STRAP_CC_DRD_MODE_ENABLE_SEL)); if (USB_CTRL_MASK_FAMILY(params, SETUP, STRAP_IPP_SEL)) + /* override ipp strap pin (if it exits) */ if (params->ipp != 2) - /* override ipp strap pin (if it exits) */ reg &= ~(USB_CTRL_MASK_FAMILY(params, SETUP, STRAP_IPP_SEL)); @@ -808,50 +771,38 @@ void brcm_usb_init_ipp(struct brcm_usb_init_params *params) reg &= ~(USB_CTRL_MASK(SETUP, IPP) | USB_CTRL_MASK(SETUP, IOC)); if (params->ioc) reg |= USB_CTRL_MASK(SETUP, IOC); - if (params->ipp == 1 && ((reg & USB_CTRL_MASK(SETUP, IPP)) == 0)) + if (params->ipp == 1) reg |= USB_CTRL_MASK(SETUP, IPP); - brcmusb_writel(reg, USB_CTRL_REG(ctrl, SETUP)); + brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP)); /* * If we're changing IPP, make sure power is off long enough * to turn off any connected devices. */ - if (reg != orig_reg) + if ((reg ^ orig_reg) & USB_CTRL_MASK(SETUP, IPP)) msleep(50); } -int brcm_usb_init_get_dual_select(struct brcm_usb_init_params *params) +static void usb_wake_enable(struct brcm_usb_init_params *params, + bool enable) { - void __iomem *ctrl = params->ctrl_regs; - u32 reg = 0; + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; - if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) { - reg = brcmusb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); - reg &= USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, - PORT_MODE); - } - return reg; + if (enable) + USB_CTRL_SET(ctrl, USB_PM, RMTWKUP_EN); + else + USB_CTRL_UNSET(ctrl, USB_PM, RMTWKUP_EN); } -void brcm_usb_init_set_dual_select(struct brcm_usb_init_params *params, - int mode) +static void usb_init_common(struct brcm_usb_init_params *params) { - void __iomem *ctrl = params->ctrl_regs; u32 reg; + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; - if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) { - reg = brcmusb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); - reg &= ~USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, - PORT_MODE); - reg |= mode; - brcmusb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); - } -} - -void brcm_usb_init_common(struct brcm_usb_init_params *params) -{ - u32 reg; - void __iomem *ctrl = params->ctrl_regs; + /* Clear any pending wake conditions */ + usb_wake_enable(params, false); + reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_PM_STATUS)); + brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_PM_STATUS)); /* Take USB out of power down */ if (USB_CTRL_MASK_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN)) { @@ -877,7 +828,7 @@ void brcm_usb_init_common(struct brcm_usb_init_params *params) /* Block auto PLL suspend by USB2 PHY (Sasi) */ USB_CTRL_SET(ctrl, PLL_CTL, PLL_SUSPEND_EN); - reg = brcmusb_readl(USB_CTRL_REG(ctrl, SETUP)); + reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP)); if (params->selected_family == BRCM_FAMILY_7364A0) /* Suppress overcurrent indication from USB30 ports for A0 */ reg |= USB_CTRL_MASK_FAMILY(params, SETUP, OC3_DISABLE); @@ -893,16 +844,16 @@ void brcm_usb_init_common(struct brcm_usb_init_params *params) reg |= USB_CTRL_MASK_FAMILY(params, SETUP, SCB1_EN); if (USB_CTRL_MASK_FAMILY(params, SETUP, SCB2_EN)) reg |= USB_CTRL_MASK_FAMILY(params, SETUP, SCB2_EN); - brcmusb_writel(reg, USB_CTRL_REG(ctrl, SETUP)); + brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP)); brcmusb_memc_fix(params); if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) { - reg = brcmusb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); + reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); reg &= ~USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE); reg |= params->mode; - brcmusb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); + brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); } if (USB_CTRL_MASK_FAMILY(params, USB_PM, BDC_SOFT_RESETB)) { switch (params->mode) { @@ -924,10 +875,10 @@ void brcm_usb_init_common(struct brcm_usb_init_params *params) } } -void brcm_usb_init_eohci(struct brcm_usb_init_params *params) +static void usb_init_eohci(struct brcm_usb_init_params *params) { u32 reg; - void __iomem *ctrl = params->ctrl_regs; + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; if (USB_CTRL_MASK_FAMILY(params, USB_PM, USB20_HC_RESETB)) USB_CTRL_SET_FAMILY(params, USB_PM, USB20_HC_RESETB); @@ -940,19 +891,30 @@ void brcm_usb_init_eohci(struct brcm_usb_init_params *params) USB_CTRL_SET(ctrl, EBRIDGE, ESTOP_SCB_REQ); /* Setup the endian bits */ - reg = brcmusb_readl(USB_CTRL_REG(ctrl, SETUP)); + reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP)); reg &= ~USB_CTRL_SETUP_ENDIAN_BITS; reg |= USB_CTRL_MASK_FAMILY(params, SETUP, ENDIAN); - brcmusb_writel(reg, USB_CTRL_REG(ctrl, SETUP)); + brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP)); if (params->selected_family == BRCM_FAMILY_7271A0) /* Enable LS keep alive fix for certain keyboards */ USB_CTRL_SET(ctrl, OBRIDGE, LS_KEEP_ALIVE); + + if (params->family_id == 0x72550000) { + /* + * Make the burst size 512 bytes to fix a hardware bug + * on the 7255a0. See HW7255-24. + */ + reg = brcm_usb_readl(USB_CTRL_REG(ctrl, EBRIDGE)); + reg &= ~USB_CTRL_MASK(EBRIDGE, EBR_SCB_SIZE); + reg |= 0x800; + brcm_usb_writel(reg, USB_CTRL_REG(ctrl, EBRIDGE)); + } } -void brcm_usb_init_xhci(struct brcm_usb_init_params *params) +static void usb_init_xhci(struct brcm_usb_init_params *params) { - void __iomem *ctrl = params->ctrl_regs; + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; USB_CTRL_UNSET(ctrl, USB30_PCTL, PHY3_IDDQ_OVERRIDE); /* 1 millisecond - for USB clocks to settle down */ @@ -978,34 +940,80 @@ void brcm_usb_init_xhci(struct brcm_usb_init_params *params) brcmusb_usb3_otp_fix(params); } -void brcm_usb_uninit_common(struct brcm_usb_init_params *params) +static void usb_uninit_common(struct brcm_usb_init_params *params) { if (USB_CTRL_MASK_FAMILY(params, USB_PM, USB_PWRDN)) USB_CTRL_SET_FAMILY(params, USB_PM, USB_PWRDN); if (USB_CTRL_MASK_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN)) USB_CTRL_SET_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN); + if (params->wake_enabled) + usb_wake_enable(params, true); } -void brcm_usb_uninit_eohci(struct brcm_usb_init_params *params) +static void usb_uninit_eohci(struct brcm_usb_init_params *params) { - if (USB_CTRL_MASK_FAMILY(params, USB_PM, USB20_HC_RESETB)) - USB_CTRL_UNSET_FAMILY(params, USB_PM, USB20_HC_RESETB); } -void brcm_usb_uninit_xhci(struct brcm_usb_init_params *params) +static void usb_uninit_xhci(struct brcm_usb_init_params *params) { brcmusb_xhci_soft_reset(params, 1); - USB_CTRL_SET(params->ctrl_regs, USB30_PCTL, PHY3_IDDQ_OVERRIDE); + USB_CTRL_SET(params->regs[BRCM_REGS_CTRL], USB30_PCTL, + PHY3_IDDQ_OVERRIDE); +} + +static int usb_get_dual_select(struct brcm_usb_init_params *params) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + u32 reg = 0; + + pr_debug("%s\n", __func__); + if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) { + reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); + reg &= USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, + PORT_MODE); + } + return reg; } -void brcm_usb_set_family_map(struct brcm_usb_init_params *params) +static void usb_set_dual_select(struct brcm_usb_init_params *params, int mode) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + u32 reg; + + pr_debug("%s\n", __func__); + + if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) { + reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); + reg &= ~USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, + PORT_MODE); + reg |= mode; + brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1)); + } +} + +static const struct brcm_usb_init_ops bcm7445_ops = { + .init_ipp = usb_init_ipp, + .init_common = usb_init_common, + .init_eohci = usb_init_eohci, + .init_xhci = usb_init_xhci, + .uninit_common = usb_uninit_common, + .uninit_eohci = usb_uninit_eohci, + .uninit_xhci = usb_uninit_xhci, + .get_dual_select = usb_get_dual_select, + .set_dual_select = usb_set_dual_select, +}; + +void brcm_usb_dvr_init_7445(struct brcm_usb_init_params *params) { int fam; - fam = brcmusb_get_family_type(params); + pr_debug("%s\n", __func__); + + fam = get_family_type(params); params->selected_family = fam; params->usb_reg_bits_map = &usb_reg_bits_map_table[fam][0]; params->family_name = family_names[fam]; + params->ops = &bcm7445_ops; } diff --git a/drivers/phy/broadcom/phy-brcm-usb-init.h b/drivers/phy/broadcom/phy-brcm-usb-init.h index f4f4f6d5d258..899b9eb43fad 100644 --- a/drivers/phy/broadcom/phy-brcm-usb-init.h +++ b/drivers/phy/broadcom/phy-brcm-usb-init.h @@ -6,16 +6,50 @@ #ifndef _USB_BRCM_COMMON_INIT_H #define _USB_BRCM_COMMON_INIT_H +#include <linux/regmap.h> + #define USB_CTLR_MODE_HOST 0 #define USB_CTLR_MODE_DEVICE 1 #define USB_CTLR_MODE_DRD 2 #define USB_CTLR_MODE_TYPEC_PD 3 +enum brcmusb_reg_sel { + BRCM_REGS_CTRL = 0, + BRCM_REGS_XHCI_EC, + BRCM_REGS_XHCI_GBL, + BRCM_REGS_USB_PHY, + BRCM_REGS_USB_MDIO, + BRCM_REGS_BDC_EC, + BRCM_REGS_MAX +}; + +#define USB_CTRL_REG(base, reg) ((void __iomem *)base + USB_CTRL_##reg) +#define USB_XHCI_EC_REG(base, reg) ((void __iomem *)base + USB_XHCI_EC_##reg) +#define USB_CTRL_MASK(reg, field) \ + USB_CTRL_##reg##_##field##_MASK +#define USB_CTRL_SET(base, reg, field) \ + brcm_usb_ctrl_set(USB_CTRL_REG(base, reg), \ + USB_CTRL_##reg##_##field##_MASK) +#define USB_CTRL_UNSET(base, reg, field) \ + brcm_usb_ctrl_unset(USB_CTRL_REG(base, reg), \ + USB_CTRL_##reg##_##field##_MASK) + struct brcm_usb_init_params; +struct brcm_usb_init_ops { + void (*init_ipp)(struct brcm_usb_init_params *params); + void (*init_common)(struct brcm_usb_init_params *params); + void (*init_eohci)(struct brcm_usb_init_params *params); + void (*init_xhci)(struct brcm_usb_init_params *params); + void (*uninit_common)(struct brcm_usb_init_params *params); + void (*uninit_eohci)(struct brcm_usb_init_params *params); + void (*uninit_xhci)(struct brcm_usb_init_params *params); + int (*get_dual_select)(struct brcm_usb_init_params *params); + void (*set_dual_select)(struct brcm_usb_init_params *params, int mode); +}; + struct brcm_usb_init_params { - void __iomem *ctrl_regs; - void __iomem *xhci_ec_regs; + void __iomem *regs[BRCM_REGS_MAX]; int ioc; int ipp; int mode; @@ -24,19 +58,105 @@ struct brcm_usb_init_params { int selected_family; const char *family_name; const u32 *usb_reg_bits_map; + const struct brcm_usb_init_ops *ops; + struct regmap *syscon_piarbctl; + bool wake_enabled; + bool suspend_with_clocks; +}; + +void brcm_usb_dvr_init_7445(struct brcm_usb_init_params *params); +void brcm_usb_dvr_init_7216(struct brcm_usb_init_params *params); +void brcm_usb_dvr_init_7211b0(struct brcm_usb_init_params *params); + +static inline u32 brcm_usb_readl(void __iomem *addr) +{ + /* + * MIPS endianness is configured by boot strap, which also reverses all + * bus endianness (i.e., big-endian CPU + big endian bus ==> native + * endian I/O). + * + * Other architectures (e.g., ARM) either do not support big endian, or + * else leave I/O in little endian mode. + */ + if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(__BIG_ENDIAN)) + return __raw_readl(addr); + else + return readl_relaxed(addr); +} + +static inline void brcm_usb_writel(u32 val, void __iomem *addr) +{ + /* See brcmnand_readl() comments */ + if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(__BIG_ENDIAN)) + __raw_writel(val, addr); + else + writel_relaxed(val, addr); +} + +static inline void brcm_usb_ctrl_unset(void __iomem *reg, u32 mask) +{ + brcm_usb_writel(brcm_usb_readl(reg) & ~(mask), reg); }; -void brcm_usb_set_family_map(struct brcm_usb_init_params *params); -int brcm_usb_init_get_dual_select(struct brcm_usb_init_params *params); -void brcm_usb_init_set_dual_select(struct brcm_usb_init_params *params, - int mode); - -void brcm_usb_init_ipp(struct brcm_usb_init_params *ini); -void brcm_usb_init_common(struct brcm_usb_init_params *ini); -void brcm_usb_init_eohci(struct brcm_usb_init_params *ini); -void brcm_usb_init_xhci(struct brcm_usb_init_params *ini); -void brcm_usb_uninit_common(struct brcm_usb_init_params *ini); -void brcm_usb_uninit_eohci(struct brcm_usb_init_params *ini); -void brcm_usb_uninit_xhci(struct brcm_usb_init_params *ini); +static inline void brcm_usb_ctrl_set(void __iomem *reg, u32 mask) +{ + brcm_usb_writel(brcm_usb_readl(reg) | (mask), reg); +}; + +static inline void brcm_usb_init_ipp(struct brcm_usb_init_params *ini) +{ + if (ini->ops->init_ipp) + ini->ops->init_ipp(ini); +} + +static inline void brcm_usb_init_common(struct brcm_usb_init_params *ini) +{ + if (ini->ops->init_common) + ini->ops->init_common(ini); +} + +static inline void brcm_usb_init_eohci(struct brcm_usb_init_params *ini) +{ + if (ini->ops->init_eohci) + ini->ops->init_eohci(ini); +} + +static inline void brcm_usb_init_xhci(struct brcm_usb_init_params *ini) +{ + if (ini->ops->init_xhci) + ini->ops->init_xhci(ini); +} + +static inline void brcm_usb_uninit_common(struct brcm_usb_init_params *ini) +{ + if (ini->ops->uninit_common) + ini->ops->uninit_common(ini); +} + +static inline void brcm_usb_uninit_eohci(struct brcm_usb_init_params *ini) +{ + if (ini->ops->uninit_eohci) + ini->ops->uninit_eohci(ini); +} + +static inline void brcm_usb_uninit_xhci(struct brcm_usb_init_params *ini) +{ + if (ini->ops->uninit_xhci) + ini->ops->uninit_xhci(ini); +} + +static inline int brcm_usb_get_dual_select(struct brcm_usb_init_params *ini) +{ + if (ini->ops->get_dual_select) + return ini->ops->get_dual_select(ini); + return 0; +} + +static inline void brcm_usb_set_dual_select(struct brcm_usb_init_params *ini, + int mode) +{ + if (ini->ops->set_dual_select) + ini->ops->set_dual_select(ini, mode); +} #endif /* _USB_BRCM_COMMON_INIT_H */ diff --git a/drivers/phy/broadcom/phy-brcm-usb.c b/drivers/phy/broadcom/phy-brcm-usb.c index f5c1f2983a1d..491bbd46c5b3 100644 --- a/drivers/phy/broadcom/phy-brcm-usb.c +++ b/drivers/phy/broadcom/phy-brcm-usb.c @@ -16,6 +16,7 @@ #include <linux/interrupt.h> #include <linux/soc/brcmstb/brcmstb.h> #include <dt-bindings/phy/phy.h> +#include <linux/mfd/syscon.h> #include "phy-brcm-usb-init.h" @@ -32,6 +33,12 @@ struct value_to_name_map { const char *name; }; +struct match_chip_info { + void *init_func; + u8 required_regs[BRCM_REGS_MAX + 1]; + u8 optional_reg; +}; + static struct value_to_name_map brcm_dr_mode_to_name[] = { { USB_CTLR_MODE_HOST, "host" }, { USB_CTLR_MODE_DEVICE, "peripheral" }, @@ -57,11 +64,26 @@ struct brcm_usb_phy_data { bool has_xhci; struct clk *usb_20_clk; struct clk *usb_30_clk; + struct clk *suspend_clk; struct mutex mutex; /* serialize phy init */ int init_count; + int wake_irq; struct brcm_usb_phy phys[BRCM_USB_PHY_ID_MAX]; }; +static s8 *node_reg_names[BRCM_REGS_MAX] = { + "crtl", "xhci_ec", "xhci_gbl", "usb_phy", "usb_mdio", "bdc_ec" +}; + +static irqreturn_t brcm_usb_phy_wake_isr(int irq, void *dev_id) +{ + struct phy *gphy = dev_id; + + pm_wakeup_event(&gphy->dev, 0); + + return IRQ_HANDLED; +} + static int brcm_usb_phy_init(struct phy *gphy) { struct brcm_usb_phy *phy = phy_get_drvdata(gphy); @@ -74,8 +96,9 @@ static int brcm_usb_phy_init(struct phy *gphy) */ mutex_lock(&priv->mutex); if (priv->init_count++ == 0) { - clk_enable(priv->usb_20_clk); - clk_enable(priv->usb_30_clk); + clk_prepare_enable(priv->usb_20_clk); + clk_prepare_enable(priv->usb_30_clk); + clk_prepare_enable(priv->suspend_clk); brcm_usb_init_common(&priv->ini); } mutex_unlock(&priv->mutex); @@ -106,8 +129,9 @@ static int brcm_usb_phy_exit(struct phy *gphy) mutex_lock(&priv->mutex); if (--priv->init_count == 0) { brcm_usb_uninit_common(&priv->ini); - clk_disable(priv->usb_20_clk); - clk_disable(priv->usb_30_clk); + clk_disable_unprepare(priv->usb_20_clk); + clk_disable_unprepare(priv->usb_30_clk); + clk_disable_unprepare(priv->suspend_clk); } mutex_unlock(&priv->mutex); phy->inited = false; @@ -194,7 +218,7 @@ static ssize_t dual_select_store(struct device *dev, res = name_to_value(&brcm_dual_mode_to_name[0], ARRAY_SIZE(brcm_dual_mode_to_name), buf, &value); if (!res) { - brcm_usb_init_set_dual_select(&priv->ini, value); + brcm_usb_set_dual_select(&priv->ini, value); res = len; } mutex_unlock(&sysfs_lock); @@ -209,7 +233,7 @@ static ssize_t dual_select_show(struct device *dev, int value; mutex_lock(&sysfs_lock); - value = brcm_usb_init_get_dual_select(&priv->ini); + value = brcm_usb_get_dual_select(&priv->ini); mutex_unlock(&sysfs_lock); return sprintf(buf, "%s\n", value_to_name(&brcm_dual_mode_to_name[0], @@ -228,15 +252,106 @@ static const struct attribute_group brcm_usb_phy_group = { .attrs = brcm_usb_phy_attrs, }; -static int brcm_usb_phy_dvr_init(struct device *dev, +static struct match_chip_info chip_info_7216 = { + .init_func = &brcm_usb_dvr_init_7216, + .required_regs = { + BRCM_REGS_CTRL, + BRCM_REGS_XHCI_EC, + BRCM_REGS_XHCI_GBL, + -1, + }, +}; + +static struct match_chip_info chip_info_7211b0 = { + .init_func = &brcm_usb_dvr_init_7211b0, + .required_regs = { + BRCM_REGS_CTRL, + BRCM_REGS_XHCI_EC, + BRCM_REGS_XHCI_GBL, + BRCM_REGS_USB_PHY, + BRCM_REGS_USB_MDIO, + -1, + }, + .optional_reg = BRCM_REGS_BDC_EC, +}; + +static struct match_chip_info chip_info_7445 = { + .init_func = &brcm_usb_dvr_init_7445, + .required_regs = { + BRCM_REGS_CTRL, + BRCM_REGS_XHCI_EC, + -1, + }, +}; + +static const struct of_device_id brcm_usb_dt_ids[] = { + { + .compatible = "brcm,bcm7216-usb-phy", + .data = &chip_info_7216, + }, + { + .compatible = "brcm,bcm7211-usb-phy", + .data = &chip_info_7211b0, + }, + { + .compatible = "brcm,brcmstb-usb-phy", + .data = &chip_info_7445, + }, + { /* sentinel */ } +}; + +static int brcm_usb_get_regs(struct platform_device *pdev, + enum brcmusb_reg_sel regs, + struct brcm_usb_init_params *ini, + bool optional) +{ + struct resource *res; + + /* Older DT nodes have ctrl and optional xhci_ec by index only */ + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + node_reg_names[regs]); + if (res == NULL) { + if (regs == BRCM_REGS_CTRL) { + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + } else if (regs == BRCM_REGS_XHCI_EC) { + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + /* XHCI_EC registers are optional */ + if (res == NULL) + return 0; + } + if (res == NULL) { + if (optional) { + dev_dbg(&pdev->dev, + "Optional reg %s not found\n", + node_reg_names[regs]); + return 0; + } + dev_err(&pdev->dev, "can't get %s base addr\n", + node_reg_names[regs]); + return 1; + } + } + ini->regs[regs] = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(ini->regs[regs])) { + dev_err(&pdev->dev, "can't map %s register space\n", + node_reg_names[regs]); + return 1; + } + return 0; +} + +static int brcm_usb_phy_dvr_init(struct platform_device *pdev, struct brcm_usb_phy_data *priv, struct device_node *dn) { - struct phy *gphy; + struct device *dev = &pdev->dev; + struct phy *gphy = NULL; int err; priv->usb_20_clk = of_clk_get_by_name(dn, "sw_usb"); if (IS_ERR(priv->usb_20_clk)) { + if (PTR_ERR(priv->usb_20_clk) == -EPROBE_DEFER) + return -EPROBE_DEFER; dev_info(dev, "Clock not found in Device Tree\n"); priv->usb_20_clk = NULL; } @@ -267,6 +382,8 @@ static int brcm_usb_phy_dvr_init(struct device *dev, priv->usb_30_clk = of_clk_get_by_name(dn, "sw_usb3"); if (IS_ERR(priv->usb_30_clk)) { + if (PTR_ERR(priv->usb_30_clk) == -EPROBE_DEFER) + return -EPROBE_DEFER; dev_info(dev, "USB3.0 clock not found in Device Tree\n"); priv->usb_30_clk = NULL; @@ -275,18 +392,46 @@ static int brcm_usb_phy_dvr_init(struct device *dev, if (err) return err; } + + priv->suspend_clk = clk_get(dev, "usb0_freerun"); + if (IS_ERR(priv->suspend_clk)) { + if (PTR_ERR(priv->suspend_clk) == -EPROBE_DEFER) + return -EPROBE_DEFER; + dev_err(dev, "Suspend Clock not found in Device Tree\n"); + priv->suspend_clk = NULL; + } + + priv->wake_irq = platform_get_irq_byname(pdev, "wake"); + if (priv->wake_irq < 0) + priv->wake_irq = platform_get_irq_byname(pdev, "wakeup"); + if (priv->wake_irq >= 0) { + err = devm_request_irq(dev, priv->wake_irq, + brcm_usb_phy_wake_isr, 0, + dev_name(dev), gphy); + if (err < 0) + return err; + device_set_wakeup_capable(dev, 1); + } else { + dev_info(dev, + "Wake interrupt missing, system wake not supported\n"); + } + return 0; } static int brcm_usb_phy_probe(struct platform_device *pdev) { - struct resource *res; struct device *dev = &pdev->dev; struct brcm_usb_phy_data *priv; struct phy_provider *phy_provider; struct device_node *dn = pdev->dev.of_node; int err; const char *mode; + const struct of_device_id *match; + void (*dvr_init)(struct brcm_usb_init_params *params); + const struct match_chip_info *info; + struct regmap *rmap; + int x; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) @@ -295,30 +440,14 @@ static int brcm_usb_phy_probe(struct platform_device *pdev) priv->ini.family_id = brcmstb_get_family_id(); priv->ini.product_id = brcmstb_get_product_id(); - brcm_usb_set_family_map(&priv->ini); + + match = of_match_node(brcm_usb_dt_ids, dev->of_node); + info = match->data; + dvr_init = info->init_func; + (*dvr_init)(&priv->ini); + dev_dbg(dev, "Best mapping table is for %s\n", priv->ini.family_name); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(dev, "can't get USB_CTRL base address\n"); - return -EINVAL; - } - priv->ini.ctrl_regs = devm_ioremap_resource(dev, res); - if (IS_ERR(priv->ini.ctrl_regs)) { - dev_err(dev, "can't map CTRL register space\n"); - return -EINVAL; - } - - /* The XHCI EC registers are optional */ - res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (res) { - priv->ini.xhci_ec_regs = - devm_ioremap_resource(dev, res); - if (IS_ERR(priv->ini.xhci_ec_regs)) { - dev_err(dev, "can't map XHCI EC register space\n"); - return -EINVAL; - } - } of_property_read_u32(dn, "brcm,ipp", &priv->ini.ipp); of_property_read_u32(dn, "brcm,ioc", &priv->ini.ioc); @@ -335,7 +464,23 @@ static int brcm_usb_phy_probe(struct platform_device *pdev) if (of_property_read_bool(dn, "brcm,has-eohci")) priv->has_eohci = true; - err = brcm_usb_phy_dvr_init(dev, priv, dn); + for (x = 0; x < BRCM_REGS_MAX; x++) { + if (info->required_regs[x] >= BRCM_REGS_MAX) + break; + + err = brcm_usb_get_regs(pdev, info->required_regs[x], + &priv->ini, false); + if (err) + return -EINVAL; + } + if (info->optional_reg) { + err = brcm_usb_get_regs(pdev, info->optional_reg, + &priv->ini, true); + if (err) + return -EINVAL; + } + + err = brcm_usb_phy_dvr_init(pdev, priv, dn); if (err) return err; @@ -354,14 +499,23 @@ static int brcm_usb_phy_probe(struct platform_device *pdev) if (err) dev_warn(dev, "Error creating sysfs attributes\n"); + /* Get piarbctl syscon if it exists */ + rmap = syscon_regmap_lookup_by_phandle(dev->of_node, + "syscon-piarbctl"); + if (IS_ERR(rmap)) + rmap = syscon_regmap_lookup_by_phandle(dev->of_node, + "brcm,syscon-piarbctl"); + if (!IS_ERR(rmap)) + priv->ini.syscon_piarbctl = rmap; + /* start with everything off */ if (priv->has_xhci) brcm_usb_uninit_xhci(&priv->ini); if (priv->has_eohci) brcm_usb_uninit_eohci(&priv->ini); brcm_usb_uninit_common(&priv->ini); - clk_disable(priv->usb_20_clk); - clk_disable(priv->usb_30_clk); + clk_disable_unprepare(priv->usb_20_clk); + clk_disable_unprepare(priv->usb_30_clk); phy_provider = devm_of_phy_provider_register(dev, brcm_usb_phy_xlate); @@ -381,8 +535,28 @@ static int brcm_usb_phy_suspend(struct device *dev) struct brcm_usb_phy_data *priv = dev_get_drvdata(dev); if (priv->init_count) { - clk_disable(priv->usb_20_clk); - clk_disable(priv->usb_30_clk); + priv->ini.wake_enabled = device_may_wakeup(dev); + if (priv->phys[BRCM_USB_PHY_3_0].inited) + brcm_usb_uninit_xhci(&priv->ini); + if (priv->phys[BRCM_USB_PHY_2_0].inited) + brcm_usb_uninit_eohci(&priv->ini); + brcm_usb_uninit_common(&priv->ini); + + /* + * Handle the clocks unless needed for wake. This has + * to work for both older XHCI->3.0-clks, EOHCI->2.0-clks + * and newer XHCI->2.0-clks/3.0-clks. + */ + + if (!priv->ini.suspend_with_clocks) { + if (priv->phys[BRCM_USB_PHY_3_0].inited) + clk_disable_unprepare(priv->usb_30_clk); + if (priv->phys[BRCM_USB_PHY_2_0].inited || + !priv->has_eohci) + clk_disable_unprepare(priv->usb_20_clk); + } + if (priv->wake_irq >= 0) + enable_irq_wake(priv->wake_irq); } return 0; } @@ -391,8 +565,8 @@ static int brcm_usb_phy_resume(struct device *dev) { struct brcm_usb_phy_data *priv = dev_get_drvdata(dev); - clk_enable(priv->usb_20_clk); - clk_enable(priv->usb_30_clk); + clk_prepare_enable(priv->usb_20_clk); + clk_prepare_enable(priv->usb_30_clk); brcm_usb_init_ipp(&priv->ini); /* @@ -400,18 +574,22 @@ static int brcm_usb_phy_resume(struct device *dev) * Uninitialize anything that wasn't previously initialized. */ if (priv->init_count) { + if (priv->wake_irq >= 0) + disable_irq_wake(priv->wake_irq); brcm_usb_init_common(&priv->ini); if (priv->phys[BRCM_USB_PHY_2_0].inited) { brcm_usb_init_eohci(&priv->ini); } else if (priv->has_eohci) { brcm_usb_uninit_eohci(&priv->ini); - clk_disable(priv->usb_20_clk); + clk_disable_unprepare(priv->usb_20_clk); } if (priv->phys[BRCM_USB_PHY_3_0].inited) { brcm_usb_init_xhci(&priv->ini); } else if (priv->has_xhci) { brcm_usb_uninit_xhci(&priv->ini); - clk_disable(priv->usb_30_clk); + clk_disable_unprepare(priv->usb_30_clk); + if (!priv->has_eohci) + clk_disable_unprepare(priv->usb_20_clk); } } else { if (priv->has_xhci) @@ -419,10 +597,10 @@ static int brcm_usb_phy_resume(struct device *dev) if (priv->has_eohci) brcm_usb_uninit_eohci(&priv->ini); brcm_usb_uninit_common(&priv->ini); - clk_disable(priv->usb_20_clk); - clk_disable(priv->usb_30_clk); + clk_disable_unprepare(priv->usb_20_clk); + clk_disable_unprepare(priv->usb_30_clk); } - + priv->ini.wake_enabled = false; return 0; } #endif /* CONFIG_PM_SLEEP */ @@ -431,11 +609,6 @@ static const struct dev_pm_ops brcm_usb_phy_pm_ops = { SET_LATE_SYSTEM_SLEEP_PM_OPS(brcm_usb_phy_suspend, brcm_usb_phy_resume) }; -static const struct of_device_id brcm_usb_dt_ids[] = { - { .compatible = "brcm,brcmstb-usb-phy" }, - { /* sentinel */ } -}; - MODULE_DEVICE_TABLE(of, brcm_usb_dt_ids); static struct platform_driver brcm_usb_driver = { diff --git a/drivers/phy/cadence/phy-cadence-sierra.c b/drivers/phy/cadence/phy-cadence-sierra.c index de10402f2931..a5c08e5bd2bf 100644 --- a/drivers/phy/cadence/phy-cadence-sierra.c +++ b/drivers/phy/cadence/phy-cadence-sierra.c @@ -22,48 +22,134 @@ #include <dt-bindings/phy/phy.h> /* PHY register offsets */ -#define SIERRA_PHY_PLL_CFG (0xc00e << 2) -#define SIERRA_DET_STANDEC_A (0x4000 << 2) -#define SIERRA_DET_STANDEC_B (0x4001 << 2) -#define SIERRA_DET_STANDEC_C (0x4002 << 2) -#define SIERRA_DET_STANDEC_D (0x4003 << 2) -#define SIERRA_DET_STANDEC_E (0x4004 << 2) -#define SIERRA_PSM_LANECAL (0x4008 << 2) -#define SIERRA_PSM_DIAG (0x4015 << 2) -#define SIERRA_PSC_TX_A0 (0x4028 << 2) -#define SIERRA_PSC_TX_A1 (0x4029 << 2) -#define SIERRA_PSC_TX_A2 (0x402A << 2) -#define SIERRA_PSC_TX_A3 (0x402B << 2) -#define SIERRA_PSC_RX_A0 (0x4030 << 2) -#define SIERRA_PSC_RX_A1 (0x4031 << 2) -#define SIERRA_PSC_RX_A2 (0x4032 << 2) -#define SIERRA_PSC_RX_A3 (0x4033 << 2) -#define SIERRA_PLLCTRL_SUBRATE (0x403A << 2) -#define SIERRA_PLLCTRL_GEN_D (0x403E << 2) -#define SIERRA_DRVCTRL_ATTEN (0x406A << 2) -#define SIERRA_CLKPATHCTRL_TMR (0x4081 << 2) -#define SIERRA_RX_CREQ_FLTR_A_MODE1 (0x4087 << 2) -#define SIERRA_RX_CREQ_FLTR_A_MODE0 (0x4088 << 2) -#define SIERRA_CREQ_CCLKDET_MODE01 (0x408E << 2) -#define SIERRA_RX_CTLE_MAINTENANCE (0x4091 << 2) -#define SIERRA_CREQ_FSMCLK_SEL (0x4092 << 2) -#define SIERRA_CTLELUT_CTRL (0x4098 << 2) -#define SIERRA_DFE_ECMP_RATESEL (0x40C0 << 2) -#define SIERRA_DFE_SMP_RATESEL (0x40C1 << 2) -#define SIERRA_DEQ_VGATUNE_CTRL (0x40E1 << 2) -#define SIERRA_TMRVAL_MODE3 (0x416E << 2) -#define SIERRA_TMRVAL_MODE2 (0x416F << 2) -#define SIERRA_TMRVAL_MODE1 (0x4170 << 2) -#define SIERRA_TMRVAL_MODE0 (0x4171 << 2) -#define SIERRA_PICNT_MODE1 (0x4174 << 2) -#define SIERRA_CPI_OUTBUF_RATESEL (0x417C << 2) -#define SIERRA_LFPSFILT_NS (0x418A << 2) -#define SIERRA_LFPSFILT_RD (0x418B << 2) -#define SIERRA_LFPSFILT_MP (0x418C << 2) -#define SIERRA_SDFILT_H2L_A (0x4191 << 2) - -#define SIERRA_MACRO_ID 0x00007364 -#define SIERRA_MAX_LANES 4 +#define SIERRA_COMMON_CDB_OFFSET 0x0 +#define SIERRA_MACRO_ID_REG 0x0 +#define SIERRA_CMN_PLLLC_MODE_PREG 0x48 +#define SIERRA_CMN_PLLLC_LF_COEFF_MODE1_PREG 0x49 +#define SIERRA_CMN_PLLLC_LF_COEFF_MODE0_PREG 0x4A +#define SIERRA_CMN_PLLLC_LOCK_CNTSTART_PREG 0x4B +#define SIERRA_CMN_PLLLC_BWCAL_MODE1_PREG 0x4F +#define SIERRA_CMN_PLLLC_BWCAL_MODE0_PREG 0x50 +#define SIERRA_CMN_PLLLC_SS_TIME_STEPSIZE_MODE_PREG 0x62 + +#define SIERRA_LANE_CDB_OFFSET(ln, block_offset, reg_offset) \ + ((0x4000 << (block_offset)) + \ + (((ln) << 9) << (reg_offset))) + +#define SIERRA_DET_STANDEC_A_PREG 0x000 +#define SIERRA_DET_STANDEC_B_PREG 0x001 +#define SIERRA_DET_STANDEC_C_PREG 0x002 +#define SIERRA_DET_STANDEC_D_PREG 0x003 +#define SIERRA_DET_STANDEC_E_PREG 0x004 +#define SIERRA_PSM_LANECAL_DLY_A1_RESETS_PREG 0x008 +#define SIERRA_PSM_A0IN_TMR_PREG 0x009 +#define SIERRA_PSM_DIAG_PREG 0x015 +#define SIERRA_PSC_TX_A0_PREG 0x028 +#define SIERRA_PSC_TX_A1_PREG 0x029 +#define SIERRA_PSC_TX_A2_PREG 0x02A +#define SIERRA_PSC_TX_A3_PREG 0x02B +#define SIERRA_PSC_RX_A0_PREG 0x030 +#define SIERRA_PSC_RX_A1_PREG 0x031 +#define SIERRA_PSC_RX_A2_PREG 0x032 +#define SIERRA_PSC_RX_A3_PREG 0x033 +#define SIERRA_PLLCTRL_SUBRATE_PREG 0x03A +#define SIERRA_PLLCTRL_GEN_D_PREG 0x03E +#define SIERRA_PLLCTRL_CPGAIN_MODE_PREG 0x03F +#define SIERRA_PLLCTRL_STATUS_PREG 0x044 +#define SIERRA_CLKPATH_BIASTRIM_PREG 0x04B +#define SIERRA_DFE_BIASTRIM_PREG 0x04C +#define SIERRA_DRVCTRL_ATTEN_PREG 0x06A +#define SIERRA_CLKPATHCTRL_TMR_PREG 0x081 +#define SIERRA_RX_CREQ_FLTR_A_MODE3_PREG 0x085 +#define SIERRA_RX_CREQ_FLTR_A_MODE2_PREG 0x086 +#define SIERRA_RX_CREQ_FLTR_A_MODE1_PREG 0x087 +#define SIERRA_RX_CREQ_FLTR_A_MODE0_PREG 0x088 +#define SIERRA_CREQ_CCLKDET_MODE01_PREG 0x08E +#define SIERRA_RX_CTLE_MAINTENANCE_PREG 0x091 +#define SIERRA_CREQ_FSMCLK_SEL_PREG 0x092 +#define SIERRA_CREQ_EQ_CTRL_PREG 0x093 +#define SIERRA_CREQ_SPARE_PREG 0x096 +#define SIERRA_CREQ_EQ_OPEN_EYE_THRESH_PREG 0x097 +#define SIERRA_CTLELUT_CTRL_PREG 0x098 +#define SIERRA_DFE_ECMP_RATESEL_PREG 0x0C0 +#define SIERRA_DFE_SMP_RATESEL_PREG 0x0C1 +#define SIERRA_DEQ_PHALIGN_CTRL 0x0C4 +#define SIERRA_DEQ_CONCUR_CTRL1_PREG 0x0C8 +#define SIERRA_DEQ_CONCUR_CTRL2_PREG 0x0C9 +#define SIERRA_DEQ_EPIPWR_CTRL2_PREG 0x0CD +#define SIERRA_DEQ_FAST_MAINT_CYCLES_PREG 0x0CE +#define SIERRA_DEQ_ERRCMP_CTRL_PREG 0x0D0 +#define SIERRA_DEQ_OFFSET_CTRL_PREG 0x0D8 +#define SIERRA_DEQ_GAIN_CTRL_PREG 0x0E0 +#define SIERRA_DEQ_VGATUNE_CTRL_PREG 0x0E1 +#define SIERRA_DEQ_GLUT0 0x0E8 +#define SIERRA_DEQ_GLUT1 0x0E9 +#define SIERRA_DEQ_GLUT2 0x0EA +#define SIERRA_DEQ_GLUT3 0x0EB +#define SIERRA_DEQ_GLUT4 0x0EC +#define SIERRA_DEQ_GLUT5 0x0ED +#define SIERRA_DEQ_GLUT6 0x0EE +#define SIERRA_DEQ_GLUT7 0x0EF +#define SIERRA_DEQ_GLUT8 0x0F0 +#define SIERRA_DEQ_GLUT9 0x0F1 +#define SIERRA_DEQ_GLUT10 0x0F2 +#define SIERRA_DEQ_GLUT11 0x0F3 +#define SIERRA_DEQ_GLUT12 0x0F4 +#define SIERRA_DEQ_GLUT13 0x0F5 +#define SIERRA_DEQ_GLUT14 0x0F6 +#define SIERRA_DEQ_GLUT15 0x0F7 +#define SIERRA_DEQ_GLUT16 0x0F8 +#define SIERRA_DEQ_ALUT0 0x108 +#define SIERRA_DEQ_ALUT1 0x109 +#define SIERRA_DEQ_ALUT2 0x10A +#define SIERRA_DEQ_ALUT3 0x10B +#define SIERRA_DEQ_ALUT4 0x10C +#define SIERRA_DEQ_ALUT5 0x10D +#define SIERRA_DEQ_ALUT6 0x10E +#define SIERRA_DEQ_ALUT7 0x10F +#define SIERRA_DEQ_ALUT8 0x110 +#define SIERRA_DEQ_ALUT9 0x111 +#define SIERRA_DEQ_ALUT10 0x112 +#define SIERRA_DEQ_ALUT11 0x113 +#define SIERRA_DEQ_ALUT12 0x114 +#define SIERRA_DEQ_ALUT13 0x115 +#define SIERRA_DEQ_DFETAP_CTRL_PREG 0x128 +#define SIERRA_DFE_EN_1010_IGNORE_PREG 0x134 +#define SIERRA_DEQ_TAU_CTRL1_SLOW_MAINT_PREG 0x150 +#define SIERRA_DEQ_TAU_CTRL2_PREG 0x151 +#define SIERRA_DEQ_PICTRL_PREG 0x161 +#define SIERRA_CPICAL_TMRVAL_MODE1_PREG 0x170 +#define SIERRA_CPICAL_TMRVAL_MODE0_PREG 0x171 +#define SIERRA_CPICAL_PICNT_MODE1_PREG 0x174 +#define SIERRA_CPI_OUTBUF_RATESEL_PREG 0x17C +#define SIERRA_CPICAL_RES_STARTCODE_MODE23_PREG 0x183 +#define SIERRA_LFPSDET_SUPPORT_PREG 0x188 +#define SIERRA_LFPSFILT_NS_PREG 0x18A +#define SIERRA_LFPSFILT_RD_PREG 0x18B +#define SIERRA_LFPSFILT_MP_PREG 0x18C +#define SIERRA_SIGDET_SUPPORT_PREG 0x190 +#define SIERRA_SDFILT_H2L_A_PREG 0x191 +#define SIERRA_SDFILT_L2H_PREG 0x193 +#define SIERRA_RXBUFFER_CTLECTRL_PREG 0x19E +#define SIERRA_RXBUFFER_RCDFECTRL_PREG 0x19F +#define SIERRA_RXBUFFER_DFECTRL_PREG 0x1A0 +#define SIERRA_DEQ_TAU_CTRL1_FAST_MAINT_PREG 0x14F +#define SIERRA_DEQ_TAU_CTRL1_SLOW_MAINT_PREG 0x150 + +#define SIERRA_PHY_CONFIG_CTRL_OFFSET(block_offset) \ + (0xc000 << (block_offset)) +#define SIERRA_PHY_PLL_CFG 0xe + +#define SIERRA_MACRO_ID 0x00007364 +#define SIERRA_MAX_LANES 16 +#define PLL_LOCK_TIME 100000 + +static const struct reg_field macro_id_type = + REG_FIELD(SIERRA_MACRO_ID_REG, 0, 15); +static const struct reg_field phy_pll_cfg_1 = + REG_FIELD(SIERRA_PHY_PLL_CFG, 1, 1); +static const struct reg_field pllctrl_lock = + REG_FIELD(SIERRA_PLLCTRL_STATUS_PREG, 0, 0); struct cdns_sierra_inst { struct phy *phy; @@ -80,53 +166,172 @@ struct cdns_reg_pairs { struct cdns_sierra_data { u32 id_value; - u32 pcie_regs; - u32 usb_regs; - struct cdns_reg_pairs *pcie_vals; - struct cdns_reg_pairs *usb_vals; + u8 block_offset_shift; + u8 reg_offset_shift; + u32 pcie_cmn_regs; + u32 pcie_ln_regs; + u32 usb_cmn_regs; + u32 usb_ln_regs; + struct cdns_reg_pairs *pcie_cmn_vals; + struct cdns_reg_pairs *pcie_ln_vals; + struct cdns_reg_pairs *usb_cmn_vals; + struct cdns_reg_pairs *usb_ln_vals; }; -struct cdns_sierra_phy { +struct cdns_regmap_cdb_context { struct device *dev; void __iomem *base; + u8 reg_offset_shift; +}; + +struct cdns_sierra_phy { + struct device *dev; + struct regmap *regmap; struct cdns_sierra_data *init_data; struct cdns_sierra_inst phys[SIERRA_MAX_LANES]; struct reset_control *phy_rst; struct reset_control *apb_rst; + struct regmap *regmap_lane_cdb[SIERRA_MAX_LANES]; + struct regmap *regmap_phy_config_ctrl; + struct regmap *regmap_common_cdb; + struct regmap_field *macro_id_type; + struct regmap_field *phy_pll_cfg_1; + struct regmap_field *pllctrl_lock[SIERRA_MAX_LANES]; struct clk *clk; + struct clk *cmn_refclk_dig_div; + struct clk *cmn_refclk1_dig_div; int nsubnodes; + u32 num_lanes; bool autoconf; }; -static void cdns_sierra_phy_init(struct phy *gphy) +static int cdns_regmap_write(void *context, unsigned int reg, unsigned int val) +{ + struct cdns_regmap_cdb_context *ctx = context; + u32 offset = reg << ctx->reg_offset_shift; + + writew(val, ctx->base + offset); + + return 0; +} + +static int cdns_regmap_read(void *context, unsigned int reg, unsigned int *val) +{ + struct cdns_regmap_cdb_context *ctx = context; + u32 offset = reg << ctx->reg_offset_shift; + + *val = readw(ctx->base + offset); + return 0; +} + +#define SIERRA_LANE_CDB_REGMAP_CONF(n) \ +{ \ + .name = "sierra_lane" n "_cdb", \ + .reg_stride = 1, \ + .fast_io = true, \ + .reg_write = cdns_regmap_write, \ + .reg_read = cdns_regmap_read, \ +} + +static struct regmap_config cdns_sierra_lane_cdb_config[] = { + SIERRA_LANE_CDB_REGMAP_CONF("0"), + SIERRA_LANE_CDB_REGMAP_CONF("1"), + SIERRA_LANE_CDB_REGMAP_CONF("2"), + SIERRA_LANE_CDB_REGMAP_CONF("3"), + SIERRA_LANE_CDB_REGMAP_CONF("4"), + SIERRA_LANE_CDB_REGMAP_CONF("5"), + SIERRA_LANE_CDB_REGMAP_CONF("6"), + SIERRA_LANE_CDB_REGMAP_CONF("7"), + SIERRA_LANE_CDB_REGMAP_CONF("8"), + SIERRA_LANE_CDB_REGMAP_CONF("9"), + SIERRA_LANE_CDB_REGMAP_CONF("10"), + SIERRA_LANE_CDB_REGMAP_CONF("11"), + SIERRA_LANE_CDB_REGMAP_CONF("12"), + SIERRA_LANE_CDB_REGMAP_CONF("13"), + SIERRA_LANE_CDB_REGMAP_CONF("14"), + SIERRA_LANE_CDB_REGMAP_CONF("15"), +}; + +static struct regmap_config cdns_sierra_common_cdb_config = { + .name = "sierra_common_cdb", + .reg_stride = 1, + .fast_io = true, + .reg_write = cdns_regmap_write, + .reg_read = cdns_regmap_read, +}; + +static struct regmap_config cdns_sierra_phy_config_ctrl_config = { + .name = "sierra_phy_config_ctrl", + .reg_stride = 1, + .fast_io = true, + .reg_write = cdns_regmap_write, + .reg_read = cdns_regmap_read, +}; + +static int cdns_sierra_phy_init(struct phy *gphy) { struct cdns_sierra_inst *ins = phy_get_drvdata(gphy); struct cdns_sierra_phy *phy = dev_get_drvdata(gphy->dev.parent); + struct regmap *regmap; int i, j; - struct cdns_reg_pairs *vals; - u32 num_regs; + struct cdns_reg_pairs *cmn_vals, *ln_vals; + u32 num_cmn_regs, num_ln_regs; + + /* Initialise the PHY registers, unless auto configured */ + if (phy->autoconf) + return 0; + clk_set_rate(phy->cmn_refclk_dig_div, 25000000); + clk_set_rate(phy->cmn_refclk1_dig_div, 25000000); if (ins->phy_type == PHY_TYPE_PCIE) { - num_regs = phy->init_data->pcie_regs; - vals = phy->init_data->pcie_vals; + num_cmn_regs = phy->init_data->pcie_cmn_regs; + num_ln_regs = phy->init_data->pcie_ln_regs; + cmn_vals = phy->init_data->pcie_cmn_vals; + ln_vals = phy->init_data->pcie_ln_vals; } else if (ins->phy_type == PHY_TYPE_USB3) { - num_regs = phy->init_data->usb_regs; - vals = phy->init_data->usb_vals; + num_cmn_regs = phy->init_data->usb_cmn_regs; + num_ln_regs = phy->init_data->usb_ln_regs; + cmn_vals = phy->init_data->usb_cmn_vals; + ln_vals = phy->init_data->usb_ln_vals; } else { - return; + return -EINVAL; } - for (i = 0; i < ins->num_lanes; i++) - for (j = 0; j < num_regs ; j++) - writel(vals[j].val, phy->base + - vals[j].off + (i + ins->mlane) * 0x800); + + regmap = phy->regmap_common_cdb; + for (j = 0; j < num_cmn_regs ; j++) + regmap_write(regmap, cmn_vals[j].off, cmn_vals[j].val); + + for (i = 0; i < ins->num_lanes; i++) { + for (j = 0; j < num_ln_regs ; j++) { + regmap = phy->regmap_lane_cdb[i + ins->mlane]; + regmap_write(regmap, ln_vals[j].off, ln_vals[j].val); + } + } + + return 0; } static int cdns_sierra_phy_on(struct phy *gphy) { + struct cdns_sierra_phy *sp = dev_get_drvdata(gphy->dev.parent); struct cdns_sierra_inst *ins = phy_get_drvdata(gphy); + struct device *dev = sp->dev; + u32 val; + int ret; /* Take the PHY lane group out of reset */ - return reset_control_deassert(ins->lnk_rst); + ret = reset_control_deassert(ins->lnk_rst); + if (ret) { + dev_err(dev, "Failed to take the PHY lane out of reset\n"); + return ret; + } + + ret = regmap_field_read_poll_timeout(sp->pllctrl_lock[ins->mlane], + val, val, 1000, PLL_LOCK_TIME); + if (ret < 0) + dev_err(dev, "PLL lock of lane failed\n"); + + return ret; } static int cdns_sierra_phy_off(struct phy *gphy) @@ -136,9 +341,20 @@ static int cdns_sierra_phy_off(struct phy *gphy) return reset_control_assert(ins->lnk_rst); } +static int cdns_sierra_phy_reset(struct phy *gphy) +{ + struct cdns_sierra_phy *sp = dev_get_drvdata(gphy->dev.parent); + + reset_control_assert(sp->phy_rst); + reset_control_deassert(sp->phy_rst); + return 0; +}; + static const struct phy_ops ops = { + .init = cdns_sierra_phy_init, .power_on = cdns_sierra_phy_on, .power_off = cdns_sierra_phy_off, + .reset = cdns_sierra_phy_reset, .owner = THIS_MODULE, }; @@ -159,41 +375,152 @@ static int cdns_sierra_get_optional(struct cdns_sierra_inst *inst, static const struct of_device_id cdns_sierra_id_table[]; +static struct regmap *cdns_regmap_init(struct device *dev, void __iomem *base, + u32 block_offset, u8 reg_offset_shift, + const struct regmap_config *config) +{ + struct cdns_regmap_cdb_context *ctx; + + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return ERR_PTR(-ENOMEM); + + ctx->dev = dev; + ctx->base = base + block_offset; + ctx->reg_offset_shift = reg_offset_shift; + + return devm_regmap_init(dev, NULL, ctx, config); +} + +static int cdns_regfield_init(struct cdns_sierra_phy *sp) +{ + struct device *dev = sp->dev; + struct regmap_field *field; + struct regmap *regmap; + int i; + + regmap = sp->regmap_common_cdb; + field = devm_regmap_field_alloc(dev, regmap, macro_id_type); + if (IS_ERR(field)) { + dev_err(dev, "MACRO_ID_TYPE reg field init failed\n"); + return PTR_ERR(field); + } + sp->macro_id_type = field; + + regmap = sp->regmap_phy_config_ctrl; + field = devm_regmap_field_alloc(dev, regmap, phy_pll_cfg_1); + if (IS_ERR(field)) { + dev_err(dev, "PHY_PLL_CFG_1 reg field init failed\n"); + return PTR_ERR(field); + } + sp->phy_pll_cfg_1 = field; + + for (i = 0; i < SIERRA_MAX_LANES; i++) { + regmap = sp->regmap_lane_cdb[i]; + field = devm_regmap_field_alloc(dev, regmap, pllctrl_lock); + if (IS_ERR(field)) { + dev_err(dev, "P%d_ENABLE reg field init failed\n", i); + return PTR_ERR(field); + } + sp->pllctrl_lock[i] = field; + } + + return 0; +} + +static int cdns_regmap_init_blocks(struct cdns_sierra_phy *sp, + void __iomem *base, u8 block_offset_shift, + u8 reg_offset_shift) +{ + struct device *dev = sp->dev; + struct regmap *regmap; + u32 block_offset; + int i; + + for (i = 0; i < SIERRA_MAX_LANES; i++) { + block_offset = SIERRA_LANE_CDB_OFFSET(i, block_offset_shift, + reg_offset_shift); + regmap = cdns_regmap_init(dev, base, block_offset, + reg_offset_shift, + &cdns_sierra_lane_cdb_config[i]); + if (IS_ERR(regmap)) { + dev_err(dev, "Failed to init lane CDB regmap\n"); + return PTR_ERR(regmap); + } + sp->regmap_lane_cdb[i] = regmap; + } + + regmap = cdns_regmap_init(dev, base, SIERRA_COMMON_CDB_OFFSET, + reg_offset_shift, + &cdns_sierra_common_cdb_config); + if (IS_ERR(regmap)) { + dev_err(dev, "Failed to init common CDB regmap\n"); + return PTR_ERR(regmap); + } + sp->regmap_common_cdb = regmap; + + block_offset = SIERRA_PHY_CONFIG_CTRL_OFFSET(block_offset_shift); + regmap = cdns_regmap_init(dev, base, block_offset, reg_offset_shift, + &cdns_sierra_phy_config_ctrl_config); + if (IS_ERR(regmap)) { + dev_err(dev, "Failed to init PHY config and control regmap\n"); + return PTR_ERR(regmap); + } + sp->regmap_phy_config_ctrl = regmap; + + return 0; +} + static int cdns_sierra_phy_probe(struct platform_device *pdev) { struct cdns_sierra_phy *sp; struct phy_provider *phy_provider; struct device *dev = &pdev->dev; const struct of_device_id *match; + struct cdns_sierra_data *data; + unsigned int id_value; struct resource *res; int i, ret, node = 0; + void __iomem *base; + struct clk *clk; struct device_node *dn = dev->of_node, *child; if (of_get_child_count(dn) == 0) return -ENODEV; + /* Get init data for this PHY */ + match = of_match_device(cdns_sierra_id_table, dev); + if (!match) + return -EINVAL; + + data = (struct cdns_sierra_data *)match->data; + sp = devm_kzalloc(dev, sizeof(*sp), GFP_KERNEL); if (!sp) return -ENOMEM; dev_set_drvdata(dev, sp); sp->dev = dev; + sp->init_data = data; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - sp->base = devm_ioremap_resource(dev, res); - if (IS_ERR(sp->base)) { + base = devm_ioremap_resource(dev, res); + if (IS_ERR(base)) { dev_err(dev, "missing \"reg\"\n"); - return PTR_ERR(sp->base); + return PTR_ERR(base); } - /* Get init data for this PHY */ - match = of_match_device(cdns_sierra_id_table, dev); - if (!match) - return -EINVAL; - sp->init_data = (struct cdns_sierra_data *)match->data; + ret = cdns_regmap_init_blocks(sp, base, data->block_offset_shift, + data->reg_offset_shift); + if (ret) + return ret; + + ret = cdns_regfield_init(sp); + if (ret) + return ret; platform_set_drvdata(pdev, sp); - sp->clk = devm_clk_get(dev, "phy_clk"); + sp->clk = devm_clk_get_optional(dev, "phy_clk"); if (IS_ERR(sp->clk)) { dev_err(dev, "failed to get clock phy_clk\n"); return PTR_ERR(sp->clk); @@ -205,12 +532,28 @@ static int cdns_sierra_phy_probe(struct platform_device *pdev) return PTR_ERR(sp->phy_rst); } - sp->apb_rst = devm_reset_control_get(dev, "sierra_apb"); + sp->apb_rst = devm_reset_control_get_optional(dev, "sierra_apb"); if (IS_ERR(sp->apb_rst)) { dev_err(dev, "failed to get apb reset\n"); return PTR_ERR(sp->apb_rst); } + clk = devm_clk_get_optional(dev, "cmn_refclk_dig_div"); + if (IS_ERR(clk)) { + dev_err(dev, "cmn_refclk_dig_div clock not found\n"); + ret = PTR_ERR(clk); + return ret; + } + sp->cmn_refclk_dig_div = clk; + + clk = devm_clk_get_optional(dev, "cmn_refclk1_dig_div"); + if (IS_ERR(clk)) { + dev_err(dev, "cmn_refclk1_dig_div clock not found\n"); + ret = PTR_ERR(clk); + return ret; + } + sp->cmn_refclk1_dig_div = clk; + ret = clk_prepare_enable(sp->clk); if (ret) return ret; @@ -219,7 +562,8 @@ static int cdns_sierra_phy_probe(struct platform_device *pdev) reset_control_deassert(sp->apb_rst); /* Check that PHY is present */ - if (sp->init_data->id_value != readl(sp->base)) { + regmap_field_read(sp->macro_id_type, &id_value); + if (sp->init_data->id_value != id_value) { ret = -EINVAL; goto clk_disable; } @@ -230,7 +574,7 @@ static int cdns_sierra_phy_probe(struct platform_device *pdev) struct phy *gphy; sp->phys[node].lnk_rst = - of_reset_control_get_exclusive_by_index(child, 0); + of_reset_control_array_get_exclusive(child); if (IS_ERR(sp->phys[node].lnk_rst)) { dev_err(dev, "failed to get reset %s\n", @@ -248,6 +592,8 @@ static int cdns_sierra_phy_probe(struct platform_device *pdev) } } + sp->num_lanes += sp->phys[node].num_lanes; + gphy = devm_phy_create(dev, child, &ops); if (IS_ERR(gphy)) { @@ -257,17 +603,18 @@ static int cdns_sierra_phy_probe(struct platform_device *pdev) sp->phys[node].phy = gphy; phy_set_drvdata(gphy, &sp->phys[node]); - /* Initialise the PHY registers, unless auto configured */ - if (!sp->autoconf) - cdns_sierra_phy_init(gphy); - node++; } sp->nsubnodes = node; + if (sp->num_lanes > SIERRA_MAX_LANES) { + dev_err(dev, "Invalid lane configuration\n"); + goto put_child2; + } + /* If more than one subnode, configure the PHY as multilink */ if (!sp->autoconf && sp->nsubnodes > 1) - writel(2, sp->base + SIERRA_PHY_PLL_CFG); + regmap_field_write(sp->phy_pll_cfg_1, 0x1); pm_runtime_enable(dev); phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); @@ -288,7 +635,7 @@ clk_disable: static int cdns_sierra_phy_remove(struct platform_device *pdev) { - struct cdns_sierra_phy *phy = dev_get_drvdata(pdev->dev.parent); + struct cdns_sierra_phy *phy = platform_get_drvdata(pdev); int i; reset_control_assert(phy->phy_rst); @@ -306,68 +653,158 @@ static int cdns_sierra_phy_remove(struct platform_device *pdev) return 0; } -static struct cdns_reg_pairs cdns_usb_regs[] = { - /* - * Write USB configuration parameters to the PHY. - * These values are specific to this specific hardware - * configuration. - */ - {0xFE0A, SIERRA_DET_STANDEC_A}, - {0x000F, SIERRA_DET_STANDEC_B}, - {0x55A5, SIERRA_DET_STANDEC_C}, - {0x69AD, SIERRA_DET_STANDEC_D}, - {0x0241, SIERRA_DET_STANDEC_E}, - {0x0110, SIERRA_PSM_LANECAL}, - {0xCF00, SIERRA_PSM_DIAG}, - {0x001F, SIERRA_PSC_TX_A0}, - {0x0007, SIERRA_PSC_TX_A1}, - {0x0003, SIERRA_PSC_TX_A2}, - {0x0003, SIERRA_PSC_TX_A3}, - {0x0FFF, SIERRA_PSC_RX_A0}, - {0x0003, SIERRA_PSC_RX_A1}, - {0x0003, SIERRA_PSC_RX_A2}, - {0x0001, SIERRA_PSC_RX_A3}, - {0x0001, SIERRA_PLLCTRL_SUBRATE}, - {0x0406, SIERRA_PLLCTRL_GEN_D}, - {0x0000, SIERRA_DRVCTRL_ATTEN}, - {0x823E, SIERRA_CLKPATHCTRL_TMR}, - {0x078F, SIERRA_RX_CREQ_FLTR_A_MODE1}, - {0x078F, SIERRA_RX_CREQ_FLTR_A_MODE0}, - {0x7B3C, SIERRA_CREQ_CCLKDET_MODE01}, - {0x023C, SIERRA_RX_CTLE_MAINTENANCE}, - {0x3232, SIERRA_CREQ_FSMCLK_SEL}, - {0x8452, SIERRA_CTLELUT_CTRL}, - {0x4121, SIERRA_DFE_ECMP_RATESEL}, - {0x4121, SIERRA_DFE_SMP_RATESEL}, - {0x9999, SIERRA_DEQ_VGATUNE_CTRL}, - {0x0330, SIERRA_TMRVAL_MODE0}, - {0x01FF, SIERRA_PICNT_MODE1}, - {0x0009, SIERRA_CPI_OUTBUF_RATESEL}, - {0x000F, SIERRA_LFPSFILT_NS}, - {0x0009, SIERRA_LFPSFILT_RD}, - {0x0001, SIERRA_LFPSFILT_MP}, - {0x8013, SIERRA_SDFILT_H2L_A}, - {0x0400, SIERRA_TMRVAL_MODE1}, +/* refclk100MHz_32b_PCIe_cmn_pll_ext_ssc */ +static struct cdns_reg_pairs cdns_pcie_cmn_regs_ext_ssc[] = { + {0x2106, SIERRA_CMN_PLLLC_LF_COEFF_MODE1_PREG}, + {0x2106, SIERRA_CMN_PLLLC_LF_COEFF_MODE0_PREG}, + {0x8A06, SIERRA_CMN_PLLLC_BWCAL_MODE1_PREG}, + {0x8A06, SIERRA_CMN_PLLLC_BWCAL_MODE0_PREG}, + {0x1B1B, SIERRA_CMN_PLLLC_SS_TIME_STEPSIZE_MODE_PREG} }; -static struct cdns_reg_pairs cdns_pcie_regs[] = { - /* - * Write PCIe configuration parameters to the PHY. - * These values are specific to this specific hardware - * configuration. - */ - {0x891f, SIERRA_DET_STANDEC_D}, - {0x0053, SIERRA_DET_STANDEC_E}, - {0x0400, SIERRA_TMRVAL_MODE2}, - {0x0200, SIERRA_TMRVAL_MODE3}, +/* refclk100MHz_32b_PCIe_ln_ext_ssc */ +static struct cdns_reg_pairs cdns_pcie_ln_regs_ext_ssc[] = { + {0x813E, SIERRA_CLKPATHCTRL_TMR_PREG}, + {0x8047, SIERRA_RX_CREQ_FLTR_A_MODE3_PREG}, + {0x808F, SIERRA_RX_CREQ_FLTR_A_MODE2_PREG}, + {0x808F, SIERRA_RX_CREQ_FLTR_A_MODE1_PREG}, + {0x808F, SIERRA_RX_CREQ_FLTR_A_MODE0_PREG}, + {0x033C, SIERRA_RX_CTLE_MAINTENANCE_PREG}, + {0x44CC, SIERRA_CREQ_EQ_OPEN_EYE_THRESH_PREG} +}; + +/* refclk100MHz_20b_USB_cmn_pll_ext_ssc */ +static struct cdns_reg_pairs cdns_usb_cmn_regs_ext_ssc[] = { + {0x2085, SIERRA_CMN_PLLLC_LF_COEFF_MODE1_PREG}, + {0x2085, SIERRA_CMN_PLLLC_LF_COEFF_MODE0_PREG}, + {0x0000, SIERRA_CMN_PLLLC_BWCAL_MODE0_PREG}, + {0x0000, SIERRA_CMN_PLLLC_SS_TIME_STEPSIZE_MODE_PREG} +}; + +/* refclk100MHz_20b_USB_ln_ext_ssc */ +static struct cdns_reg_pairs cdns_usb_ln_regs_ext_ssc[] = { + {0xFE0A, SIERRA_DET_STANDEC_A_PREG}, + {0x000F, SIERRA_DET_STANDEC_B_PREG}, + {0x00A5, SIERRA_DET_STANDEC_C_PREG}, + {0x69ad, SIERRA_DET_STANDEC_D_PREG}, + {0x0241, SIERRA_DET_STANDEC_E_PREG}, + {0x0010, SIERRA_PSM_LANECAL_DLY_A1_RESETS_PREG}, + {0x0014, SIERRA_PSM_A0IN_TMR_PREG}, + {0xCF00, SIERRA_PSM_DIAG_PREG}, + {0x001F, SIERRA_PSC_TX_A0_PREG}, + {0x0007, SIERRA_PSC_TX_A1_PREG}, + {0x0003, SIERRA_PSC_TX_A2_PREG}, + {0x0003, SIERRA_PSC_TX_A3_PREG}, + {0x0FFF, SIERRA_PSC_RX_A0_PREG}, + {0x0619, SIERRA_PSC_RX_A1_PREG}, + {0x0003, SIERRA_PSC_RX_A2_PREG}, + {0x0001, SIERRA_PSC_RX_A3_PREG}, + {0x0001, SIERRA_PLLCTRL_SUBRATE_PREG}, + {0x0406, SIERRA_PLLCTRL_GEN_D_PREG}, + {0x5233, SIERRA_PLLCTRL_CPGAIN_MODE_PREG}, + {0x00CA, SIERRA_CLKPATH_BIASTRIM_PREG}, + {0x2512, SIERRA_DFE_BIASTRIM_PREG}, + {0x0000, SIERRA_DRVCTRL_ATTEN_PREG}, + {0x873E, SIERRA_CLKPATHCTRL_TMR_PREG}, + {0x03CF, SIERRA_RX_CREQ_FLTR_A_MODE1_PREG}, + {0x01CE, SIERRA_RX_CREQ_FLTR_A_MODE0_PREG}, + {0x7B3C, SIERRA_CREQ_CCLKDET_MODE01_PREG}, + {0x033F, SIERRA_RX_CTLE_MAINTENANCE_PREG}, + {0x3232, SIERRA_CREQ_FSMCLK_SEL_PREG}, + {0x0000, SIERRA_CREQ_EQ_CTRL_PREG}, + {0x8000, SIERRA_CREQ_SPARE_PREG}, + {0xCC44, SIERRA_CREQ_EQ_OPEN_EYE_THRESH_PREG}, + {0x8453, SIERRA_CTLELUT_CTRL_PREG}, + {0x4110, SIERRA_DFE_ECMP_RATESEL_PREG}, + {0x4110, SIERRA_DFE_SMP_RATESEL_PREG}, + {0x0002, SIERRA_DEQ_PHALIGN_CTRL}, + {0x3200, SIERRA_DEQ_CONCUR_CTRL1_PREG}, + {0x5064, SIERRA_DEQ_CONCUR_CTRL2_PREG}, + {0x0030, SIERRA_DEQ_EPIPWR_CTRL2_PREG}, + {0x0048, SIERRA_DEQ_FAST_MAINT_CYCLES_PREG}, + {0x5A5A, SIERRA_DEQ_ERRCMP_CTRL_PREG}, + {0x02F5, SIERRA_DEQ_OFFSET_CTRL_PREG}, + {0x02F5, SIERRA_DEQ_GAIN_CTRL_PREG}, + {0x9A8A, SIERRA_DEQ_VGATUNE_CTRL_PREG}, + {0x0014, SIERRA_DEQ_GLUT0}, + {0x0014, SIERRA_DEQ_GLUT1}, + {0x0014, SIERRA_DEQ_GLUT2}, + {0x0014, SIERRA_DEQ_GLUT3}, + {0x0014, SIERRA_DEQ_GLUT4}, + {0x0014, SIERRA_DEQ_GLUT5}, + {0x0014, SIERRA_DEQ_GLUT6}, + {0x0014, SIERRA_DEQ_GLUT7}, + {0x0014, SIERRA_DEQ_GLUT8}, + {0x0014, SIERRA_DEQ_GLUT9}, + {0x0014, SIERRA_DEQ_GLUT10}, + {0x0014, SIERRA_DEQ_GLUT11}, + {0x0014, SIERRA_DEQ_GLUT12}, + {0x0014, SIERRA_DEQ_GLUT13}, + {0x0014, SIERRA_DEQ_GLUT14}, + {0x0014, SIERRA_DEQ_GLUT15}, + {0x0014, SIERRA_DEQ_GLUT16}, + {0x0BAE, SIERRA_DEQ_ALUT0}, + {0x0AEB, SIERRA_DEQ_ALUT1}, + {0x0A28, SIERRA_DEQ_ALUT2}, + {0x0965, SIERRA_DEQ_ALUT3}, + {0x08A2, SIERRA_DEQ_ALUT4}, + {0x07DF, SIERRA_DEQ_ALUT5}, + {0x071C, SIERRA_DEQ_ALUT6}, + {0x0659, SIERRA_DEQ_ALUT7}, + {0x0596, SIERRA_DEQ_ALUT8}, + {0x0514, SIERRA_DEQ_ALUT9}, + {0x0492, SIERRA_DEQ_ALUT10}, + {0x0410, SIERRA_DEQ_ALUT11}, + {0x038E, SIERRA_DEQ_ALUT12}, + {0x030C, SIERRA_DEQ_ALUT13}, + {0x03F4, SIERRA_DEQ_DFETAP_CTRL_PREG}, + {0x0001, SIERRA_DFE_EN_1010_IGNORE_PREG}, + {0x3C01, SIERRA_DEQ_TAU_CTRL1_FAST_MAINT_PREG}, + {0x3C40, SIERRA_DEQ_TAU_CTRL1_SLOW_MAINT_PREG}, + {0x1C08, SIERRA_DEQ_TAU_CTRL2_PREG}, + {0x0033, SIERRA_DEQ_PICTRL_PREG}, + {0x0400, SIERRA_CPICAL_TMRVAL_MODE1_PREG}, + {0x0330, SIERRA_CPICAL_TMRVAL_MODE0_PREG}, + {0x01FF, SIERRA_CPICAL_PICNT_MODE1_PREG}, + {0x0009, SIERRA_CPI_OUTBUF_RATESEL_PREG}, + {0x3232, SIERRA_CPICAL_RES_STARTCODE_MODE23_PREG}, + {0x0005, SIERRA_LFPSDET_SUPPORT_PREG}, + {0x000F, SIERRA_LFPSFILT_NS_PREG}, + {0x0009, SIERRA_LFPSFILT_RD_PREG}, + {0x0001, SIERRA_LFPSFILT_MP_PREG}, + {0x8013, SIERRA_SDFILT_H2L_A_PREG}, + {0x8009, SIERRA_SDFILT_L2H_PREG}, + {0x0024, SIERRA_RXBUFFER_CTLECTRL_PREG}, + {0x0020, SIERRA_RXBUFFER_RCDFECTRL_PREG}, + {0x4243, SIERRA_RXBUFFER_DFECTRL_PREG} }; static const struct cdns_sierra_data cdns_map_sierra = { SIERRA_MACRO_ID, - ARRAY_SIZE(cdns_pcie_regs), - ARRAY_SIZE(cdns_usb_regs), - cdns_pcie_regs, - cdns_usb_regs + 0x2, + 0x2, + ARRAY_SIZE(cdns_pcie_cmn_regs_ext_ssc), + ARRAY_SIZE(cdns_pcie_ln_regs_ext_ssc), + ARRAY_SIZE(cdns_usb_cmn_regs_ext_ssc), + ARRAY_SIZE(cdns_usb_ln_regs_ext_ssc), + cdns_pcie_cmn_regs_ext_ssc, + cdns_pcie_ln_regs_ext_ssc, + cdns_usb_cmn_regs_ext_ssc, + cdns_usb_ln_regs_ext_ssc, +}; + +static const struct cdns_sierra_data cdns_ti_map_sierra = { + SIERRA_MACRO_ID, + 0x0, + 0x1, + ARRAY_SIZE(cdns_pcie_cmn_regs_ext_ssc), + ARRAY_SIZE(cdns_pcie_ln_regs_ext_ssc), + ARRAY_SIZE(cdns_usb_cmn_regs_ext_ssc), + ARRAY_SIZE(cdns_usb_ln_regs_ext_ssc), + cdns_pcie_cmn_regs_ext_ssc, + cdns_pcie_ln_regs_ext_ssc, + cdns_usb_cmn_regs_ext_ssc, + cdns_usb_ln_regs_ext_ssc, }; static const struct of_device_id cdns_sierra_id_table[] = { @@ -375,6 +812,10 @@ static const struct of_device_id cdns_sierra_id_table[] = { .compatible = "cdns,sierra-phy-t0", .data = &cdns_map_sierra, }, + { + .compatible = "ti,sierra-phy-t0", + .data = &cdns_ti_map_sierra, + }, {} }; MODULE_DEVICE_TABLE(of, cdns_sierra_id_table); diff --git a/drivers/phy/hisilicon/Kconfig b/drivers/phy/hisilicon/Kconfig index 534e393a09b3..1c73053bcc98 100644 --- a/drivers/phy/hisilicon/Kconfig +++ b/drivers/phy/hisilicon/Kconfig @@ -33,14 +33,14 @@ config PHY_HISTB_COMBPHY If unsure, say N. config PHY_HISI_INNO_USB2 - tristate "HiSilicon INNO USB2 PHY support" - depends on (ARCH_HISI && ARM64) || COMPILE_TEST - select GENERIC_PHY - select MFD_SYSCON - help - Support for INNO USB2 PHY on HiSilicon SoCs. This Phy supports - USB 1.5Mb/s, USB 12Mb/s, USB 480Mb/s speeds. It supports one - USB host port to accept one USB device. + tristate "HiSilicon INNO USB2 PHY support" + depends on (ARCH_HISI && ARM64) || COMPILE_TEST + select GENERIC_PHY + select MFD_SYSCON + help + Support for INNO USB2 PHY on HiSilicon SoCs. This Phy supports + USB 1.5Mb/s, USB 12Mb/s, USB 480Mb/s speeds. It supports one + USB host port to accept one USB device. config PHY_HIX5HD2_SATA tristate "HIX5HD2 SATA PHY Driver" diff --git a/drivers/phy/intel/Kconfig b/drivers/phy/intel/Kconfig new file mode 100644 index 000000000000..4ea6a8897cd7 --- /dev/null +++ b/drivers/phy/intel/Kconfig @@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Phy drivers for Intel Lightning Mountain(LGM) platform +# +config PHY_INTEL_EMMC + tristate "Intel EMMC PHY driver" + select GENERIC_PHY + help + Enable this to support the Intel EMMC PHY diff --git a/drivers/phy/intel/Makefile b/drivers/phy/intel/Makefile new file mode 100644 index 000000000000..6b876a75599d --- /dev/null +++ b/drivers/phy/intel/Makefile @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0 +obj-$(CONFIG_PHY_INTEL_EMMC) += phy-intel-emmc.o diff --git a/drivers/phy/intel/phy-intel-emmc.c b/drivers/phy/intel/phy-intel-emmc.c new file mode 100644 index 000000000000..703aeb122541 --- /dev/null +++ b/drivers/phy/intel/phy-intel-emmc.c @@ -0,0 +1,284 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Intel eMMC PHY driver + * Copyright (C) 2019 Intel, Corp. + */ + +#include <linux/bits.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +/* eMMC phy register definitions */ +#define EMMC_PHYCTRL0_REG 0xa8 +#define DR_TY_MASK GENMASK(30, 28) +#define DR_TY_SHIFT(x) (((x) << 28) & DR_TY_MASK) +#define OTAPDLYENA BIT(14) +#define OTAPDLYSEL_MASK GENMASK(13, 10) +#define OTAPDLYSEL_SHIFT(x) (((x) << 10) & OTAPDLYSEL_MASK) + +#define EMMC_PHYCTRL1_REG 0xac +#define PDB_MASK BIT(0) +#define PDB_SHIFT(x) (((x) << 0) & PDB_MASK) +#define ENDLL_MASK BIT(7) +#define ENDLL_SHIFT(x) (((x) << 7) & ENDLL_MASK) + +#define EMMC_PHYCTRL2_REG 0xb0 +#define FRQSEL_25M 0 +#define FRQSEL_50M 1 +#define FRQSEL_100M 2 +#define FRQSEL_150M 3 +#define FRQSEL_MASK GENMASK(24, 22) +#define FRQSEL_SHIFT(x) (((x) << 22) & FRQSEL_MASK) + +#define EMMC_PHYSTAT_REG 0xbc +#define CALDONE_MASK BIT(9) +#define DLLRDY_MASK BIT(8) +#define IS_CALDONE(x) ((x) & CALDONE_MASK) +#define IS_DLLRDY(x) ((x) & DLLRDY_MASK) + +struct intel_emmc_phy { + struct regmap *syscfg; + struct clk *emmcclk; +}; + +static int intel_emmc_phy_power(struct phy *phy, bool on_off) +{ + struct intel_emmc_phy *priv = phy_get_drvdata(phy); + unsigned int caldone; + unsigned int dllrdy; + unsigned int freqsel; + unsigned long rate; + int ret, quot; + + /* + * Keep phyctrl_pdb and phyctrl_endll low to allow + * initialization of CALIO state M/C DFFs + */ + ret = regmap_update_bits(priv->syscfg, EMMC_PHYCTRL1_REG, PDB_MASK, + PDB_SHIFT(0)); + if (ret) { + dev_err(&phy->dev, "CALIO power down bar failed: %d\n", ret); + return ret; + } + + /* Already finish power_off above */ + if (!on_off) + return 0; + + rate = clk_get_rate(priv->emmcclk); + quot = DIV_ROUND_CLOSEST(rate, 50000000); + if (quot > FRQSEL_150M) + dev_warn(&phy->dev, "Unsupported rate: %lu\n", rate); + freqsel = clamp_t(int, quot, FRQSEL_25M, FRQSEL_150M); + + /* + * According to the user manual, calpad calibration + * cycle takes more than 2us without the minimal recommended + * value, so we may need a little margin here + */ + udelay(5); + + ret = regmap_update_bits(priv->syscfg, EMMC_PHYCTRL1_REG, PDB_MASK, + PDB_SHIFT(1)); + if (ret) { + dev_err(&phy->dev, "CALIO power down bar failed: %d\n", ret); + return ret; + } + + /* + * According to the user manual, it asks driver to wait 5us for + * calpad busy trimming. However it is documented that this value is + * PVT(A.K.A process,voltage and temperature) relevant, so some + * failure cases are found which indicates we should be more tolerant + * to calpad busy trimming. + */ + ret = regmap_read_poll_timeout(priv->syscfg, EMMC_PHYSTAT_REG, + caldone, IS_CALDONE(caldone), + 0, 50); + if (ret) { + dev_err(&phy->dev, "caldone failed, ret=%d\n", ret); + return ret; + } + + /* Set the frequency of the DLL operation */ + ret = regmap_update_bits(priv->syscfg, EMMC_PHYCTRL2_REG, FRQSEL_MASK, + FRQSEL_SHIFT(freqsel)); + if (ret) { + dev_err(&phy->dev, "set the frequency of dll failed:%d\n", ret); + return ret; + } + + /* Turn on the DLL */ + ret = regmap_update_bits(priv->syscfg, EMMC_PHYCTRL1_REG, ENDLL_MASK, + ENDLL_SHIFT(1)); + if (ret) { + dev_err(&phy->dev, "turn on the dll failed: %d\n", ret); + return ret; + } + + /* + * After enabling analog DLL circuits docs say that we need 10.2 us if + * our source clock is at 50 MHz and that lock time scales linearly + * with clock speed. If we are powering on the PHY and the card clock + * is super slow (like 100 kHZ) this could take as long as 5.1 ms as + * per the math: 10.2 us * (50000000 Hz / 100000 Hz) => 5.1 ms + * Hopefully we won't be running at 100 kHz, but we should still make + * sure we wait long enough. + * + * NOTE: There appear to be corner cases where the DLL seems to take + * extra long to lock for reasons that aren't understood. In some + * extreme cases we've seen it take up to over 10ms (!). We'll be + * generous and give it 50ms. + */ + ret = regmap_read_poll_timeout(priv->syscfg, + EMMC_PHYSTAT_REG, + dllrdy, IS_DLLRDY(dllrdy), + 0, 50 * USEC_PER_MSEC); + if (ret) { + dev_err(&phy->dev, "dllrdy failed. ret=%d\n", ret); + return ret; + } + + return 0; +} + +static int intel_emmc_phy_init(struct phy *phy) +{ + struct intel_emmc_phy *priv = phy_get_drvdata(phy); + + /* + * We purposely get the clock here and not in probe to avoid the + * circular dependency problem. We expect: + * - PHY driver to probe + * - SDHCI driver to start probe + * - SDHCI driver to register it's clock + * - SDHCI driver to get the PHY + * - SDHCI driver to init the PHY + * + * The clock is optional, so upon any error just return it like + * any other error to user. + * + */ + priv->emmcclk = clk_get_optional(&phy->dev, "emmcclk"); + if (IS_ERR(priv->emmcclk)) { + dev_err(&phy->dev, "ERROR: getting emmcclk\n"); + return PTR_ERR(priv->emmcclk); + } + + return 0; +} + +static int intel_emmc_phy_exit(struct phy *phy) +{ + struct intel_emmc_phy *priv = phy_get_drvdata(phy); + + clk_put(priv->emmcclk); + + return 0; +} + +static int intel_emmc_phy_power_on(struct phy *phy) +{ + struct intel_emmc_phy *priv = phy_get_drvdata(phy); + int ret; + + /* Drive impedance: 50 Ohm */ + ret = regmap_update_bits(priv->syscfg, EMMC_PHYCTRL0_REG, DR_TY_MASK, + DR_TY_SHIFT(6)); + if (ret) { + dev_err(&phy->dev, "ERROR set drive-impednce-50ohm: %d\n", ret); + return ret; + } + + /* Output tap delay: disable */ + ret = regmap_update_bits(priv->syscfg, EMMC_PHYCTRL0_REG, OTAPDLYENA, + 0); + if (ret) { + dev_err(&phy->dev, "ERROR Set output tap delay : %d\n", ret); + return ret; + } + + /* Output tap delay */ + ret = regmap_update_bits(priv->syscfg, EMMC_PHYCTRL0_REG, + OTAPDLYSEL_MASK, OTAPDLYSEL_SHIFT(4)); + if (ret) { + dev_err(&phy->dev, "ERROR: output tap dly select: %d\n", ret); + return ret; + } + + /* Power up eMMC phy analog blocks */ + return intel_emmc_phy_power(phy, true); +} + +static int intel_emmc_phy_power_off(struct phy *phy) +{ + /* Power down eMMC phy analog blocks */ + return intel_emmc_phy_power(phy, false); +} + +static const struct phy_ops ops = { + .init = intel_emmc_phy_init, + .exit = intel_emmc_phy_exit, + .power_on = intel_emmc_phy_power_on, + .power_off = intel_emmc_phy_power_off, + .owner = THIS_MODULE, +}; + +static int intel_emmc_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct intel_emmc_phy *priv; + struct phy *generic_phy; + struct phy_provider *phy_provider; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + /* Get eMMC phy (accessed via chiptop) regmap */ + priv->syscfg = syscon_regmap_lookup_by_phandle(np, "intel,syscon"); + if (IS_ERR(priv->syscfg)) { + dev_err(dev, "failed to find syscon\n"); + return PTR_ERR(priv->syscfg); + } + + generic_phy = devm_phy_create(dev, np, &ops); + if (IS_ERR(generic_phy)) { + dev_err(dev, "failed to create PHY\n"); + return PTR_ERR(generic_phy); + } + + phy_set_drvdata(generic_phy, priv); + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id intel_emmc_phy_dt_ids[] = { + { .compatible = "intel,lgm-emmc-phy" }, + {} +}; + +MODULE_DEVICE_TABLE(of, intel_emmc_phy_dt_ids); + +static struct platform_driver intel_emmc_driver = { + .probe = intel_emmc_phy_probe, + .driver = { + .name = "intel-emmc-phy", + .of_match_table = intel_emmc_phy_dt_ids, + }, +}; + +module_platform_driver(intel_emmc_driver); + +MODULE_AUTHOR("Peter Harliman Liem <peter.harliman.liem@intel.com>"); +MODULE_DESCRIPTION("Intel eMMC PHY driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c b/drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c index 6e457967653e..2ff9a48d833e 100644 --- a/drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c +++ b/drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c @@ -386,7 +386,7 @@ static struct phy *ltq_vrx200_pcie_phy_xlate(struct device *dev, default: dev_err(dev, "invalid PHY mode %u\n", mode); return ERR_PTR(-EINVAL); - }; + } return priv->phy; } diff --git a/drivers/phy/marvell/Kconfig b/drivers/phy/marvell/Kconfig index 005e02dd4a91..8f6273c837ec 100644 --- a/drivers/phy/marvell/Kconfig +++ b/drivers/phy/marvell/Kconfig @@ -10,14 +10,16 @@ config ARMADA375_USBCLUSTER_PHY config PHY_BERLIN_SATA tristate "Marvell Berlin SATA PHY driver" - depends on ARCH_BERLIN && HAS_IOMEM && OF + depends on ARCH_BERLIN || COMPILE_TEST + depends on OF && HAS_IOMEM select GENERIC_PHY help Enable this to support the SATA PHY on Marvell Berlin SoCs. config PHY_BERLIN_USB tristate "Marvell Berlin USB PHY Driver" - depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF + depends on ARCH_BERLIN || COMPILE_TEST + depends on OF && HAS_IOMEM && RESET_CONTROLLER select GENERIC_PHY help Enable this to support the USB PHY on Marvell Berlin SoCs. @@ -95,7 +97,7 @@ config PHY_PXA_28NM_USB2 config PHY_PXA_USB tristate "Marvell PXA USB PHY Driver" - depends on ARCH_PXA || ARCH_MMP + depends on ARCH_PXA || ARCH_MMP || COMPILE_TEST select GENERIC_PHY help Enable this to support Marvell PXA USB PHY driver for Marvell diff --git a/drivers/phy/mediatek/Kconfig b/drivers/phy/mediatek/Kconfig index 376f5d189da0..dee757c957f2 100644 --- a/drivers/phy/mediatek/Kconfig +++ b/drivers/phy/mediatek/Kconfig @@ -3,12 +3,13 @@ # Phy drivers for Mediatek devices # config PHY_MTK_TPHY - tristate "MediaTek T-PHY Driver" - depends on ARCH_MEDIATEK && OF - select GENERIC_PHY - help - Say 'Y' here to add support for MediaTek T-PHY driver, - it supports multiple usb2.0, usb3.0 ports, PCIe and + tristate "MediaTek T-PHY Driver" + depends on ARCH_MEDIATEK || COMPILE_TEST + depends on OF + select GENERIC_PHY + help + Say 'Y' here to add support for MediaTek T-PHY driver, + it supports multiple usb2.0, usb3.0 ports, PCIe and SATA, and meanwhile supports two version T-PHY which have different banks layout, the T-PHY with shared banks between multi-ports is first version, otherwise is second veriosn, @@ -16,7 +17,8 @@ config PHY_MTK_TPHY config PHY_MTK_UFS tristate "MediaTek UFS M-PHY driver" - depends on ARCH_MEDIATEK && OF + depends on ARCH_MEDIATEK || COMPILE_TEST + depends on OF select GENERIC_PHY help Support for UFS M-PHY on MediaTek chipsets. @@ -25,10 +27,11 @@ config PHY_MTK_UFS specified M-PHYs. config PHY_MTK_XSPHY - tristate "MediaTek XS-PHY Driver" - depends on ARCH_MEDIATEK && OF - select GENERIC_PHY - help + tristate "MediaTek XS-PHY Driver" + depends on ARCH_MEDIATEK || COMPILE_TEST + depends on OF + select GENERIC_PHY + help Enable this to support the SuperSpeedPlus XS-PHY transceiver for USB3.1 GEN2 controllers on MediaTek chips. The driver supports multiple USB2.0, USB3.1 GEN2 ports. diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c index b04f4fe85ac2..2eb28cc2d2dc 100644 --- a/drivers/phy/phy-core.c +++ b/drivers/phy/phy-core.c @@ -29,7 +29,7 @@ static void devm_phy_release(struct device *dev, void *res) { struct phy *phy = *(struct phy **)res; - phy_put(phy); + phy_put(dev, phy); } static void devm_phy_provider_release(struct device *dev, void *res) @@ -566,12 +566,12 @@ struct phy *of_phy_get(struct device_node *np, const char *con_id) EXPORT_SYMBOL_GPL(of_phy_get); /** - * phy_put() - release the PHY - * @phy: the phy returned by phy_get() + * of_phy_put() - release the PHY + * @phy: the phy returned by of_phy_get() * - * Releases a refcount the caller received from phy_get(). + * Releases a refcount the caller received from of_phy_get(). */ -void phy_put(struct phy *phy) +void of_phy_put(struct phy *phy) { if (!phy || IS_ERR(phy)) return; @@ -584,6 +584,20 @@ void phy_put(struct phy *phy) module_put(phy->ops->owner); put_device(&phy->dev); } +EXPORT_SYMBOL_GPL(of_phy_put); + +/** + * phy_put() - release the PHY + * @dev: device that wants to release this phy + * @phy: the phy returned by phy_get() + * + * Releases a refcount the caller received from phy_get(). + */ +void phy_put(struct device *dev, struct phy *phy) +{ + device_link_remove(dev, &phy->dev); + of_phy_put(phy); +} EXPORT_SYMBOL_GPL(phy_put); /** @@ -651,6 +665,7 @@ struct phy *phy_get(struct device *dev, const char *string) { int index = 0; struct phy *phy; + struct device_link *link; if (string == NULL) { dev_WARN(dev, "missing string\n"); @@ -672,6 +687,13 @@ struct phy *phy_get(struct device *dev, const char *string) get_device(&phy->dev); + link = device_link_add(dev, &phy->dev, DL_FLAG_STATELESS); + if (!link) { + dev_err(dev, "failed to create device link to %s\n", + dev_name(phy->dev.parent)); + return ERR_PTR(-EINVAL); + } + return phy; } EXPORT_SYMBOL_GPL(phy_get); @@ -765,6 +787,7 @@ struct phy *devm_of_phy_get(struct device *dev, struct device_node *np, const char *con_id) { struct phy **ptr, *phy; + struct device_link *link; ptr = devres_alloc(devm_phy_release, sizeof(*ptr), GFP_KERNEL); if (!ptr) @@ -776,6 +799,14 @@ struct phy *devm_of_phy_get(struct device *dev, struct device_node *np, devres_add(dev, ptr); } else { devres_free(ptr); + return phy; + } + + link = device_link_add(dev, &phy->dev, DL_FLAG_STATELESS); + if (!link) { + dev_err(dev, "failed to create device link to %s\n", + dev_name(phy->dev.parent)); + return ERR_PTR(-EINVAL); } return phy; @@ -798,6 +829,7 @@ struct phy *devm_of_phy_get_by_index(struct device *dev, struct device_node *np, int index) { struct phy **ptr, *phy; + struct device_link *link; ptr = devres_alloc(devm_phy_release, sizeof(*ptr), GFP_KERNEL); if (!ptr) @@ -819,6 +851,13 @@ struct phy *devm_of_phy_get_by_index(struct device *dev, struct device_node *np, *ptr = phy; devres_add(dev, ptr); + link = device_link_add(dev, &phy->dev, DL_FLAG_STATELESS); + if (!link) { + dev_err(dev, "failed to create device link to %s\n", + dev_name(phy->dev.parent)); + return ERR_PTR(-EINVAL); + } + return phy; } EXPORT_SYMBOL_GPL(devm_of_phy_get_by_index); diff --git a/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c b/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c index 42bc5150dd92..febe0aef68d4 100644 --- a/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c +++ b/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c @@ -80,7 +80,7 @@ static int read_poll_timeout(void __iomem *addr, u32 mask) if (readl_relaxed(addr) & mask) return 0; - usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50); + usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50); } while (!time_after(jiffies, timeout)); return (readl_relaxed(addr) & mask) ? 0 : -ETIMEDOUT; diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c index 66f91726b8b2..7db2a94f7a99 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c @@ -166,8 +166,9 @@ static const unsigned int sdm845_ufsphy_regs_layout[] = { }; static const unsigned int sm8150_ufsphy_regs_layout[] = { - [QPHY_START_CTRL] = 0x00, - [QPHY_PCS_READY_STATUS] = 0x180, + [QPHY_START_CTRL] = QPHY_V4_PHY_START, + [QPHY_PCS_READY_STATUS] = QPHY_V4_PCS_READY_STATUS, + [QPHY_SW_RESET] = QPHY_V4_SW_RESET, }; static const struct qmp_phy_init_tbl msm8996_pcie_serdes_tbl[] = { @@ -885,7 +886,6 @@ static const struct qmp_phy_init_tbl msm8998_usb3_pcs_tbl[] = { }; static const struct qmp_phy_init_tbl sm8150_ufsphy_serdes_tbl[] = { - QMP_PHY_INIT_CFG(QPHY_POWER_DOWN_CONTROL, 0x01), QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0xd9), QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x11), QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_HS_SWITCH_SEL, 0x00), @@ -1390,7 +1390,6 @@ static const struct qmp_phy_cfg sm8150_ufsphy_cfg = { .pwrdn_ctrl = SW_PWRDN, .is_dual_lane_phy = true, - .no_pcs_sw_reset = true, }; static void qcom_qmp_phy_configure(void __iomem *base, diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h index ab6ff9b45a32..90f793c2293d 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (c) 2017, The Linux Foundation. All rights reserved. */ diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig index dbd2de4d28b1..0824b9dd5683 100644 --- a/drivers/phy/rockchip/Kconfig +++ b/drivers/phy/rockchip/Kconfig @@ -39,6 +39,7 @@ config PHY_ROCKCHIP_INNO_DSIDPHY tristate "Rockchip Innosilicon MIPI/LVDS/TTL PHY driver" depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF select GENERIC_PHY + select GENERIC_PHY_MIPI_DPHY help Enable this to support the Rockchip MIPI/LVDS/TTL PHY with Innosilicon IP block. diff --git a/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c b/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c index fc729ecd3fe9..a7c6c940a3a8 100644 --- a/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c +++ b/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c @@ -16,6 +16,7 @@ #include <linux/platform_device.h> #include <linux/reset.h> #include <linux/phy/phy.h> +#include <linux/phy/phy-mipi-dphy.h> #include <linux/pm_runtime.h> #include <linux/mfd/syscon.h> @@ -167,31 +168,6 @@ #define DSI_PHY_STATUS 0xb0 #define PHY_LOCK BIT(0) -struct mipi_dphy_timing { - unsigned int clkmiss; - unsigned int clkpost; - unsigned int clkpre; - unsigned int clkprepare; - unsigned int clksettle; - unsigned int clktermen; - unsigned int clktrail; - unsigned int clkzero; - unsigned int dtermen; - unsigned int eot; - unsigned int hsexit; - unsigned int hsprepare; - unsigned int hszero; - unsigned int hssettle; - unsigned int hsskip; - unsigned int hstrail; - unsigned int init; - unsigned int lpx; - unsigned int taget; - unsigned int tago; - unsigned int tasure; - unsigned int wakeup; -}; - struct inno_dsidphy { struct device *dev; struct clk *ref_clk; @@ -201,7 +177,9 @@ struct inno_dsidphy { void __iomem *host_base; struct reset_control *rst; enum phy_mode mode; + struct phy_configure_opts_mipi_dphy dphy_cfg; + struct clk *pll_clk; struct { struct clk_hw hw; u8 prediv; @@ -238,37 +216,79 @@ static void phy_update_bits(struct inno_dsidphy *inno, writel(tmp, inno->phy_base + reg); } -static void mipi_dphy_timing_get_default(struct mipi_dphy_timing *timing, - unsigned long period) +static unsigned long inno_dsidphy_pll_calc_rate(struct inno_dsidphy *inno, + unsigned long rate) { - /* Global Operation Timing Parameters */ - timing->clkmiss = 0; - timing->clkpost = 70000 + 52 * period; - timing->clkpre = 8 * period; - timing->clkprepare = 65000; - timing->clksettle = 95000; - timing->clktermen = 0; - timing->clktrail = 80000; - timing->clkzero = 260000; - timing->dtermen = 0; - timing->eot = 0; - timing->hsexit = 120000; - timing->hsprepare = 65000 + 4 * period; - timing->hszero = 145000 + 6 * period; - timing->hssettle = 85000 + 6 * period; - timing->hsskip = 40000; - timing->hstrail = max(8 * period, 60000 + 4 * period); - timing->init = 100000000; - timing->lpx = 60000; - timing->taget = 5 * timing->lpx; - timing->tago = 4 * timing->lpx; - timing->tasure = 2 * timing->lpx; - timing->wakeup = 1000000000; + unsigned long prate = clk_get_rate(inno->ref_clk); + unsigned long best_freq = 0; + unsigned long fref, fout; + u8 min_prediv, max_prediv; + u8 _prediv, best_prediv = 1; + u16 _fbdiv, best_fbdiv = 1; + u32 min_delta = UINT_MAX; + + /* + * The PLL output frequency can be calculated using a simple formula: + * PLL_Output_Frequency = (FREF / PREDIV * FBDIV) / 2 + * PLL_Output_Frequency: it is equal to DDR-Clock-Frequency * 2 + */ + fref = prate / 2; + if (rate > 1000000000UL) + fout = 1000000000UL; + else + fout = rate; + + /* 5Mhz < Fref / prediv < 40MHz */ + min_prediv = DIV_ROUND_UP(fref, 40000000); + max_prediv = fref / 5000000; + + for (_prediv = min_prediv; _prediv <= max_prediv; _prediv++) { + u64 tmp; + u32 delta; + + tmp = (u64)fout * _prediv; + do_div(tmp, fref); + _fbdiv = tmp; + + /* + * The possible settings of feedback divider are + * 12, 13, 14, 16, ~ 511 + */ + if (_fbdiv == 15) + continue; + + if (_fbdiv < 12 || _fbdiv > 511) + continue; + + tmp = (u64)_fbdiv * fref; + do_div(tmp, _prediv); + + delta = abs(fout - tmp); + if (!delta) { + best_prediv = _prediv; + best_fbdiv = _fbdiv; + best_freq = tmp; + break; + } else if (delta < min_delta) { + best_prediv = _prediv; + best_fbdiv = _fbdiv; + best_freq = tmp; + min_delta = delta; + } + } + + if (best_freq) { + inno->pll.prediv = best_prediv; + inno->pll.fbdiv = best_fbdiv; + inno->pll.rate = best_freq; + } + + return best_freq; } static void inno_dsidphy_mipi_mode_enable(struct inno_dsidphy *inno) { - struct mipi_dphy_timing gotp; + struct phy_configure_opts_mipi_dphy *cfg = &inno->dphy_cfg; const struct { unsigned long rate; u8 hs_prepare; @@ -288,12 +308,14 @@ static void inno_dsidphy_mipi_mode_enable(struct inno_dsidphy *inno) { 800000000, 0x21, 0x1f, 0x09, 0x29}, {1000000000, 0x09, 0x20, 0x09, 0x27}, }; - u32 t_txbyteclkhs, t_txclkesc, ui; + u32 t_txbyteclkhs, t_txclkesc; u32 txbyteclkhs, txclkesc, esc_clk_div; u32 hs_exit, clk_post, clk_pre, wakeup, lpx, ta_go, ta_sure, ta_wait; u32 hs_prepare, hs_trail, hs_zero, clk_lane_hs_zero, data_lane_hs_zero; unsigned int i; + inno_dsidphy_pll_calc_rate(inno, cfg->hs_clk_rate); + /* Select MIPI mode */ phy_update_bits(inno, REGISTER_PART_LVDS, 0x03, MODE_ENABLE_MASK, MIPI_MODE_ENABLE); @@ -328,32 +350,27 @@ static void inno_dsidphy_mipi_mode_enable(struct inno_dsidphy *inno) txclkesc = txbyteclkhs / esc_clk_div; t_txclkesc = div_u64(PSEC_PER_SEC, txclkesc); - ui = div_u64(PSEC_PER_SEC, inno->pll.rate); - - memset(&gotp, 0, sizeof(gotp)); - mipi_dphy_timing_get_default(&gotp, ui); - /* * The value of counter for HS Ths-exit * Ths-exit = Tpin_txbyteclkhs * value */ - hs_exit = DIV_ROUND_UP(gotp.hsexit, t_txbyteclkhs); + hs_exit = DIV_ROUND_UP(cfg->hs_exit, t_txbyteclkhs); /* * The value of counter for HS Tclk-post * Tclk-post = Tpin_txbyteclkhs * value */ - clk_post = DIV_ROUND_UP(gotp.clkpost, t_txbyteclkhs); + clk_post = DIV_ROUND_UP(cfg->clk_post, t_txbyteclkhs); /* * The value of counter for HS Tclk-pre * Tclk-pre = Tpin_txbyteclkhs * value */ - clk_pre = DIV_ROUND_UP(gotp.clkpre, t_txbyteclkhs); + clk_pre = DIV_ROUND_UP(cfg->clk_pre, t_txbyteclkhs); /* * The value of counter for HS Tlpx Time * Tlpx = Tpin_txbyteclkhs * (2 + value) */ - lpx = DIV_ROUND_UP(gotp.lpx, t_txbyteclkhs); + lpx = DIV_ROUND_UP(cfg->lpx, t_txbyteclkhs); if (lpx >= 2) lpx -= 2; @@ -362,19 +379,19 @@ static void inno_dsidphy_mipi_mode_enable(struct inno_dsidphy *inno) * Tta-go for turnaround * Tta-go = Ttxclkesc * value */ - ta_go = DIV_ROUND_UP(gotp.tago, t_txclkesc); + ta_go = DIV_ROUND_UP(cfg->ta_go, t_txclkesc); /* * The value of counter for HS Tta-sure * Tta-sure for turnaround * Tta-sure = Ttxclkesc * value */ - ta_sure = DIV_ROUND_UP(gotp.tasure, t_txclkesc); + ta_sure = DIV_ROUND_UP(cfg->ta_sure, t_txclkesc); /* * The value of counter for HS Tta-wait * Tta-wait for turnaround * Tta-wait = Ttxclkesc * value */ - ta_wait = DIV_ROUND_UP(gotp.taget, t_txclkesc); + ta_wait = DIV_ROUND_UP(cfg->ta_get, t_txclkesc); for (i = 0; i < ARRAY_SIZE(timings); i++) if (inno->pll.rate <= timings[i].rate) @@ -479,6 +496,7 @@ static int inno_dsidphy_power_on(struct phy *phy) struct inno_dsidphy *inno = phy_get_drvdata(phy); clk_prepare_enable(inno->pclk_phy); + clk_prepare_enable(inno->ref_clk); pm_runtime_get_sync(inno->dev); /* Bandgap power on */ @@ -524,6 +542,7 @@ static int inno_dsidphy_power_off(struct phy *phy) LVDS_PLL_POWER_OFF | LVDS_BANDGAP_POWER_DOWN); pm_runtime_put(inno->dev); + clk_disable_unprepare(inno->ref_clk); clk_disable_unprepare(inno->pclk_phy); return 0; @@ -546,168 +565,32 @@ static int inno_dsidphy_set_mode(struct phy *phy, enum phy_mode mode, return 0; } -static const struct phy_ops inno_dsidphy_ops = { - .set_mode = inno_dsidphy_set_mode, - .power_on = inno_dsidphy_power_on, - .power_off = inno_dsidphy_power_off, - .owner = THIS_MODULE, -}; - -static unsigned long inno_dsidphy_pll_round_rate(struct inno_dsidphy *inno, - unsigned long prate, - unsigned long rate, - u8 *prediv, u16 *fbdiv) -{ - unsigned long best_freq = 0; - unsigned long fref, fout; - u8 min_prediv, max_prediv; - u8 _prediv, best_prediv = 1; - u16 _fbdiv, best_fbdiv = 1; - u32 min_delta = UINT_MAX; - - /* - * The PLL output frequency can be calculated using a simple formula: - * PLL_Output_Frequency = (FREF / PREDIV * FBDIV) / 2 - * PLL_Output_Frequency: it is equal to DDR-Clock-Frequency * 2 - */ - fref = prate / 2; - if (rate > 1000000000UL) - fout = 1000000000UL; - else - fout = rate; - - /* 5Mhz < Fref / prediv < 40MHz */ - min_prediv = DIV_ROUND_UP(fref, 40000000); - max_prediv = fref / 5000000; - - for (_prediv = min_prediv; _prediv <= max_prediv; _prediv++) { - u64 tmp; - u32 delta; - - tmp = (u64)fout * _prediv; - do_div(tmp, fref); - _fbdiv = tmp; - - /* - * The possible settings of feedback divider are - * 12, 13, 14, 16, ~ 511 - */ - if (_fbdiv == 15) - continue; - - if (_fbdiv < 12 || _fbdiv > 511) - continue; - - tmp = (u64)_fbdiv * fref; - do_div(tmp, _prediv); - - delta = abs(fout - tmp); - if (!delta) { - best_prediv = _prediv; - best_fbdiv = _fbdiv; - best_freq = tmp; - break; - } else if (delta < min_delta) { - best_prediv = _prediv; - best_fbdiv = _fbdiv; - best_freq = tmp; - min_delta = delta; - } - } - - if (best_freq) { - *prediv = best_prediv; - *fbdiv = best_fbdiv; - } - - return best_freq; -} - -static long inno_dsidphy_pll_clk_round_rate(struct clk_hw *hw, - unsigned long rate, - unsigned long *prate) +static int inno_dsidphy_configure(struct phy *phy, + union phy_configure_opts *opts) { - struct inno_dsidphy *inno = hw_to_inno(hw); - unsigned long fout; - u16 fbdiv = 1; - u8 prediv = 1; - - fout = inno_dsidphy_pll_round_rate(inno, *prate, rate, - &prediv, &fbdiv); - - return fout; -} - -static int inno_dsidphy_pll_clk_set_rate(struct clk_hw *hw, - unsigned long rate, - unsigned long parent_rate) -{ - struct inno_dsidphy *inno = hw_to_inno(hw); - unsigned long fout; - u16 fbdiv = 1; - u8 prediv = 1; + struct inno_dsidphy *inno = phy_get_drvdata(phy); + int ret; - fout = inno_dsidphy_pll_round_rate(inno, parent_rate, rate, - &prediv, &fbdiv); + if (inno->mode != PHY_MODE_MIPI_DPHY) + return -EINVAL; - dev_dbg(inno->dev, "fin=%lu, fout=%lu, prediv=%u, fbdiv=%u\n", - parent_rate, fout, prediv, fbdiv); + ret = phy_mipi_dphy_config_validate(&opts->mipi_dphy); + if (ret) + return ret; - inno->pll.prediv = prediv; - inno->pll.fbdiv = fbdiv; - inno->pll.rate = fout; + memcpy(&inno->dphy_cfg, &opts->mipi_dphy, sizeof(inno->dphy_cfg)); return 0; } -static unsigned long -inno_dsidphy_pll_clk_recalc_rate(struct clk_hw *hw, unsigned long prate) -{ - struct inno_dsidphy *inno = hw_to_inno(hw); - - /* PLL_Output_Frequency = (FREF / PREDIV * FBDIV) / 2 */ - return (prate / inno->pll.prediv * inno->pll.fbdiv) / 2; -} - -static const struct clk_ops inno_dsidphy_pll_clk_ops = { - .round_rate = inno_dsidphy_pll_clk_round_rate, - .set_rate = inno_dsidphy_pll_clk_set_rate, - .recalc_rate = inno_dsidphy_pll_clk_recalc_rate, +static const struct phy_ops inno_dsidphy_ops = { + .configure = inno_dsidphy_configure, + .set_mode = inno_dsidphy_set_mode, + .power_on = inno_dsidphy_power_on, + .power_off = inno_dsidphy_power_off, + .owner = THIS_MODULE, }; -static int inno_dsidphy_pll_register(struct inno_dsidphy *inno) -{ - struct device *dev = inno->dev; - struct clk *clk; - const char *parent_name; - struct clk_init_data init; - int ret; - - parent_name = __clk_get_name(inno->ref_clk); - - init.name = "mipi_dphy_pll"; - ret = of_property_read_string(dev->of_node, "clock-output-names", - &init.name); - if (ret < 0) - dev_dbg(dev, "phy should set clock-output-names property\n"); - - init.ops = &inno_dsidphy_pll_clk_ops; - init.parent_names = &parent_name; - init.num_parents = 1; - init.flags = 0; - - inno->pll.hw.init = &init; - clk = devm_clk_register(dev, &inno->pll.hw); - if (IS_ERR(clk)) { - ret = PTR_ERR(clk); - dev_err(dev, "failed to register PLL: %d\n", ret); - return ret; - } - - return devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get, - &inno->pll.hw); -} - static int inno_dsidphy_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -764,10 +647,6 @@ static int inno_dsidphy_probe(struct platform_device *pdev) return ret; } - ret = inno_dsidphy_pll_register(inno); - if (ret) - return ret; - pm_runtime_enable(dev); return 0; diff --git a/drivers/phy/samsung/Kconfig b/drivers/phy/samsung/Kconfig index 290a6c70f570..9e483d1fdaf2 100644 --- a/drivers/phy/samsung/Kconfig +++ b/drivers/phy/samsung/Kconfig @@ -32,7 +32,7 @@ config PHY_EXYNOS_PCIE config PHY_SAMSUNG_USB2 tristate "Samsung USB 2.0 PHY driver" depends on HAS_IOMEM - depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2 + depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2 || COMPILE_TEST select GENERIC_PHY select MFD_SYSCON default ARCH_EXYNOS @@ -60,7 +60,7 @@ config PHY_EXYNOS5250_USB2 config PHY_S5PV210_USB2 bool "Support for S5PV210" depends on PHY_SAMSUNG_USB2 - depends on ARCH_S5PV210 + depends on ARCH_S5PV210 || COMPILE_TEST help Enable USB PHY support for S5PV210. This option requires that Samsung USB 2.0 PHY driver is enabled and means that support for this @@ -69,7 +69,7 @@ config PHY_S5PV210_USB2 config PHY_EXYNOS5_USBDRD tristate "Exynos5 SoC series USB DRD PHY driver" - depends on ARCH_EXYNOS && OF + depends on (ARCH_EXYNOS && OF) || COMPILE_TEST depends on HAS_IOMEM depends on USB_DWC3_EXYNOS select GENERIC_PHY diff --git a/drivers/phy/ti/Kconfig b/drivers/phy/ti/Kconfig index 174888609779..6dbe9d0b9ff3 100644 --- a/drivers/phy/ti/Kconfig +++ b/drivers/phy/ti/Kconfig @@ -4,7 +4,7 @@ # config PHY_DA8XX_USB tristate "TI DA8xx USB PHY Driver" - depends on ARCH_DAVINCI_DA8XX + depends on ARCH_DAVINCI_DA8XX || COMPILE_TEST select GENERIC_PHY select MFD_SYSCON help @@ -14,7 +14,7 @@ config PHY_DA8XX_USB config PHY_DM816X_USB tristate "TI dm816x USB PHY driver" - depends on ARCH_OMAP2PLUS + depends on ARCH_OMAP2PLUS || COMPILE_TEST depends on USB_SUPPORT select GENERIC_PHY select USB_PHY @@ -33,6 +33,22 @@ config PHY_AM654_SERDES This option enables support for TI AM654 SerDes PHY used for PCIe. +config PHY_J721E_WIZ + tristate "TI J721E WIZ (SERDES Wrapper) support" + depends on OF && ARCH_K3 || COMPILE_TEST + depends on HAS_IOMEM && OF_ADDRESS + depends on COMMON_CLK + select GENERIC_PHY + select MULTIPLEXER + select REGMAP_MMIO + select MUX_MMIO + help + This option enables support for WIZ module present in TI's J721E + SoC. WIZ is a serdes wrapper used to configure some of the input + signals to the SERDES (Sierra/Torrent). This driver configures + three clock selects (pll0, pll1, dig) and resets for each of the + lanes. + config OMAP_CONTROL_PHY tristate "OMAP CONTROL PHY Driver" depends on ARCH_OMAP2PLUS || COMPILE_TEST diff --git a/drivers/phy/ti/Makefile b/drivers/phy/ti/Makefile index bff901eb0ecc..dcba2571c9bd 100644 --- a/drivers/phy/ti/Makefile +++ b/drivers/phy/ti/Makefile @@ -8,3 +8,4 @@ obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o obj-$(CONFIG_PHY_AM654_SERDES) += phy-am654-serdes.o obj-$(CONFIG_PHY_TI_GMII_SEL) += phy-gmii-sel.o +obj-$(CONFIG_PHY_J721E_WIZ) += phy-j721e-wiz.o diff --git a/drivers/phy/ti/phy-j721e-wiz.c b/drivers/phy/ti/phy-j721e-wiz.c new file mode 100644 index 000000000000..7b51045df783 --- /dev/null +++ b/drivers/phy/ti/phy-j721e-wiz.c @@ -0,0 +1,959 @@ +// SPDX-License-Identifier: GPL-2.0 +/** + * Wrapper driver for SERDES used in J721E + * + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ + * Author: Kishon Vijay Abraham I <kishon@ti.com> + */ + +#include <dt-bindings/phy/phy.h> +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/gpio.h> +#include <linux/gpio/consumer.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/mux/consumer.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/regmap.h> +#include <linux/reset-controller.h> + +#define WIZ_SERDES_CTRL 0x404 +#define WIZ_SERDES_TOP_CTRL 0x408 +#define WIZ_SERDES_RST 0x40c +#define WIZ_SERDES_TYPEC 0x410 +#define WIZ_LANECTL(n) (0x480 + (0x40 * (n))) + +#define WIZ_MAX_LANES 4 +#define WIZ_MUX_NUM_CLOCKS 3 +#define WIZ_DIV_NUM_CLOCKS_16G 2 +#define WIZ_DIV_NUM_CLOCKS_10G 1 + +#define WIZ_SERDES_TYPEC_LN10_SWAP BIT(30) + +enum wiz_lane_standard_mode { + LANE_MODE_GEN1, + LANE_MODE_GEN2, + LANE_MODE_GEN3, + LANE_MODE_GEN4, +}; + +enum wiz_refclk_mux_sel { + PLL0_REFCLK, + PLL1_REFCLK, + REFCLK_DIG, +}; + +enum wiz_refclk_div_sel { + CMN_REFCLK_DIG_DIV, + CMN_REFCLK1_DIG_DIV, +}; + +static const struct reg_field por_en = REG_FIELD(WIZ_SERDES_CTRL, 31, 31); +static const struct reg_field phy_reset_n = REG_FIELD(WIZ_SERDES_RST, 31, 31); +static const struct reg_field pll1_refclk_mux_sel = + REG_FIELD(WIZ_SERDES_RST, 29, 29); +static const struct reg_field pll0_refclk_mux_sel = + REG_FIELD(WIZ_SERDES_RST, 28, 28); +static const struct reg_field refclk_dig_sel_16g = + REG_FIELD(WIZ_SERDES_RST, 24, 25); +static const struct reg_field refclk_dig_sel_10g = + REG_FIELD(WIZ_SERDES_RST, 24, 24); +static const struct reg_field pma_cmn_refclk_int_mode = + REG_FIELD(WIZ_SERDES_TOP_CTRL, 28, 29); +static const struct reg_field pma_cmn_refclk_mode = + REG_FIELD(WIZ_SERDES_TOP_CTRL, 30, 31); +static const struct reg_field pma_cmn_refclk_dig_div = + REG_FIELD(WIZ_SERDES_TOP_CTRL, 26, 27); +static const struct reg_field pma_cmn_refclk1_dig_div = + REG_FIELD(WIZ_SERDES_TOP_CTRL, 24, 25); + +static const struct reg_field p_enable[WIZ_MAX_LANES] = { + REG_FIELD(WIZ_LANECTL(0), 30, 31), + REG_FIELD(WIZ_LANECTL(1), 30, 31), + REG_FIELD(WIZ_LANECTL(2), 30, 31), + REG_FIELD(WIZ_LANECTL(3), 30, 31), +}; + +static const struct reg_field p_align[WIZ_MAX_LANES] = { + REG_FIELD(WIZ_LANECTL(0), 29, 29), + REG_FIELD(WIZ_LANECTL(1), 29, 29), + REG_FIELD(WIZ_LANECTL(2), 29, 29), + REG_FIELD(WIZ_LANECTL(3), 29, 29), +}; + +static const struct reg_field p_raw_auto_start[WIZ_MAX_LANES] = { + REG_FIELD(WIZ_LANECTL(0), 28, 28), + REG_FIELD(WIZ_LANECTL(1), 28, 28), + REG_FIELD(WIZ_LANECTL(2), 28, 28), + REG_FIELD(WIZ_LANECTL(3), 28, 28), +}; + +static const struct reg_field p_standard_mode[WIZ_MAX_LANES] = { + REG_FIELD(WIZ_LANECTL(0), 24, 25), + REG_FIELD(WIZ_LANECTL(1), 24, 25), + REG_FIELD(WIZ_LANECTL(2), 24, 25), + REG_FIELD(WIZ_LANECTL(3), 24, 25), +}; + +static const struct reg_field typec_ln10_swap = + REG_FIELD(WIZ_SERDES_TYPEC, 30, 30); + +struct wiz_clk_mux { + struct clk_hw hw; + struct regmap_field *field; + u32 *table; + struct clk_init_data clk_data; +}; + +#define to_wiz_clk_mux(_hw) container_of(_hw, struct wiz_clk_mux, hw) + +struct wiz_clk_divider { + struct clk_hw hw; + struct regmap_field *field; + struct clk_div_table *table; + struct clk_init_data clk_data; +}; + +#define to_wiz_clk_div(_hw) container_of(_hw, struct wiz_clk_divider, hw) + +struct wiz_clk_mux_sel { + struct regmap_field *field; + u32 table[4]; + const char *node_name; +}; + +struct wiz_clk_div_sel { + struct regmap_field *field; + struct clk_div_table *table; + const char *node_name; +}; + +static struct wiz_clk_mux_sel clk_mux_sel_16g[] = { + { + /* + * Mux value to be configured for each of the input clocks + * in the order populated in device tree + */ + .table = { 1, 0 }, + .node_name = "pll0-refclk", + }, + { + .table = { 1, 0 }, + .node_name = "pll1-refclk", + }, + { + .table = { 1, 3, 0, 2 }, + .node_name = "refclk-dig", + }, +}; + +static struct wiz_clk_mux_sel clk_mux_sel_10g[] = { + { + /* + * Mux value to be configured for each of the input clocks + * in the order populated in device tree + */ + .table = { 1, 0 }, + .node_name = "pll0-refclk", + }, + { + .table = { 1, 0 }, + .node_name = "pll1-refclk", + }, + { + .table = { 1, 0 }, + .node_name = "refclk-dig", + }, +}; + +static struct clk_div_table clk_div_table[] = { + { .val = 0, .div = 1, }, + { .val = 1, .div = 2, }, + { .val = 2, .div = 4, }, + { .val = 3, .div = 8, }, +}; + +static struct wiz_clk_div_sel clk_div_sel[] = { + { + .table = clk_div_table, + .node_name = "cmn-refclk-dig-div", + }, + { + .table = clk_div_table, + .node_name = "cmn-refclk1-dig-div", + }, +}; + +enum wiz_type { + J721E_WIZ_16G, + J721E_WIZ_10G, +}; + +#define WIZ_TYPEC_DIR_DEBOUNCE_MIN 100 /* ms */ +#define WIZ_TYPEC_DIR_DEBOUNCE_MAX 1000 + +struct wiz { + struct regmap *regmap; + enum wiz_type type; + struct wiz_clk_mux_sel *clk_mux_sel; + struct wiz_clk_div_sel *clk_div_sel; + unsigned int clk_div_sel_num; + struct regmap_field *por_en; + struct regmap_field *phy_reset_n; + struct regmap_field *p_enable[WIZ_MAX_LANES]; + struct regmap_field *p_align[WIZ_MAX_LANES]; + struct regmap_field *p_raw_auto_start[WIZ_MAX_LANES]; + struct regmap_field *p_standard_mode[WIZ_MAX_LANES]; + struct regmap_field *pma_cmn_refclk_int_mode; + struct regmap_field *pma_cmn_refclk_mode; + struct regmap_field *pma_cmn_refclk_dig_div; + struct regmap_field *pma_cmn_refclk1_dig_div; + struct regmap_field *typec_ln10_swap; + + struct device *dev; + u32 num_lanes; + struct platform_device *serdes_pdev; + struct reset_controller_dev wiz_phy_reset_dev; + struct gpio_desc *gpio_typec_dir; + int typec_dir_delay; +}; + +static int wiz_reset(struct wiz *wiz) +{ + int ret; + + ret = regmap_field_write(wiz->por_en, 0x1); + if (ret) + return ret; + + mdelay(1); + + ret = regmap_field_write(wiz->por_en, 0x0); + if (ret) + return ret; + + return 0; +} + +static int wiz_mode_select(struct wiz *wiz) +{ + u32 num_lanes = wiz->num_lanes; + int ret; + int i; + + for (i = 0; i < num_lanes; i++) { + ret = regmap_field_write(wiz->p_standard_mode[i], + LANE_MODE_GEN4); + if (ret) + return ret; + } + + return 0; +} + +static int wiz_init_raw_interface(struct wiz *wiz, bool enable) +{ + u32 num_lanes = wiz->num_lanes; + int i; + int ret; + + for (i = 0; i < num_lanes; i++) { + ret = regmap_field_write(wiz->p_align[i], enable); + if (ret) + return ret; + + ret = regmap_field_write(wiz->p_raw_auto_start[i], enable); + if (ret) + return ret; + } + + return 0; +} + +static int wiz_init(struct wiz *wiz) +{ + struct device *dev = wiz->dev; + int ret; + + ret = wiz_reset(wiz); + if (ret) { + dev_err(dev, "WIZ reset failed\n"); + return ret; + } + + ret = wiz_mode_select(wiz); + if (ret) { + dev_err(dev, "WIZ mode select failed\n"); + return ret; + } + + ret = wiz_init_raw_interface(wiz, true); + if (ret) { + dev_err(dev, "WIZ interface initialization failed\n"); + return ret; + } + + return 0; +} + +static int wiz_regfield_init(struct wiz *wiz) +{ + struct wiz_clk_mux_sel *clk_mux_sel; + struct wiz_clk_div_sel *clk_div_sel; + struct regmap *regmap = wiz->regmap; + int num_lanes = wiz->num_lanes; + struct device *dev = wiz->dev; + int i; + + wiz->por_en = devm_regmap_field_alloc(dev, regmap, por_en); + if (IS_ERR(wiz->por_en)) { + dev_err(dev, "POR_EN reg field init failed\n"); + return PTR_ERR(wiz->por_en); + } + + wiz->phy_reset_n = devm_regmap_field_alloc(dev, regmap, + phy_reset_n); + if (IS_ERR(wiz->phy_reset_n)) { + dev_err(dev, "PHY_RESET_N reg field init failed\n"); + return PTR_ERR(wiz->phy_reset_n); + } + + wiz->pma_cmn_refclk_int_mode = + devm_regmap_field_alloc(dev, regmap, pma_cmn_refclk_int_mode); + if (IS_ERR(wiz->pma_cmn_refclk_int_mode)) { + dev_err(dev, "PMA_CMN_REFCLK_INT_MODE reg field init failed\n"); + return PTR_ERR(wiz->pma_cmn_refclk_int_mode); + } + + wiz->pma_cmn_refclk_mode = + devm_regmap_field_alloc(dev, regmap, pma_cmn_refclk_mode); + if (IS_ERR(wiz->pma_cmn_refclk_mode)) { + dev_err(dev, "PMA_CMN_REFCLK_MODE reg field init failed\n"); + return PTR_ERR(wiz->pma_cmn_refclk_mode); + } + + clk_div_sel = &wiz->clk_div_sel[CMN_REFCLK_DIG_DIV]; + clk_div_sel->field = devm_regmap_field_alloc(dev, regmap, + pma_cmn_refclk_dig_div); + if (IS_ERR(clk_div_sel->field)) { + dev_err(dev, "PMA_CMN_REFCLK_DIG_DIV reg field init failed\n"); + return PTR_ERR(clk_div_sel->field); + } + + if (wiz->type == J721E_WIZ_16G) { + clk_div_sel = &wiz->clk_div_sel[CMN_REFCLK1_DIG_DIV]; + clk_div_sel->field = + devm_regmap_field_alloc(dev, regmap, + pma_cmn_refclk1_dig_div); + if (IS_ERR(clk_div_sel->field)) { + dev_err(dev, "PMA_CMN_REFCLK1_DIG_DIV reg field init failed\n"); + return PTR_ERR(clk_div_sel->field); + } + } + + clk_mux_sel = &wiz->clk_mux_sel[PLL0_REFCLK]; + clk_mux_sel->field = devm_regmap_field_alloc(dev, regmap, + pll0_refclk_mux_sel); + if (IS_ERR(clk_mux_sel->field)) { + dev_err(dev, "PLL0_REFCLK_SEL reg field init failed\n"); + return PTR_ERR(clk_mux_sel->field); + } + + clk_mux_sel = &wiz->clk_mux_sel[PLL1_REFCLK]; + clk_mux_sel->field = devm_regmap_field_alloc(dev, regmap, + pll1_refclk_mux_sel); + if (IS_ERR(clk_mux_sel->field)) { + dev_err(dev, "PLL1_REFCLK_SEL reg field init failed\n"); + return PTR_ERR(clk_mux_sel->field); + } + + clk_mux_sel = &wiz->clk_mux_sel[REFCLK_DIG]; + if (wiz->type == J721E_WIZ_10G) + clk_mux_sel->field = + devm_regmap_field_alloc(dev, regmap, + refclk_dig_sel_10g); + else + clk_mux_sel->field = + devm_regmap_field_alloc(dev, regmap, + refclk_dig_sel_16g); + + if (IS_ERR(clk_mux_sel->field)) { + dev_err(dev, "REFCLK_DIG_SEL reg field init failed\n"); + return PTR_ERR(clk_mux_sel->field); + } + + for (i = 0; i < num_lanes; i++) { + wiz->p_enable[i] = devm_regmap_field_alloc(dev, regmap, + p_enable[i]); + if (IS_ERR(wiz->p_enable[i])) { + dev_err(dev, "P%d_ENABLE reg field init failed\n", i); + return PTR_ERR(wiz->p_enable[i]); + } + + wiz->p_align[i] = devm_regmap_field_alloc(dev, regmap, + p_align[i]); + if (IS_ERR(wiz->p_align[i])) { + dev_err(dev, "P%d_ALIGN reg field init failed\n", i); + return PTR_ERR(wiz->p_align[i]); + } + + wiz->p_raw_auto_start[i] = + devm_regmap_field_alloc(dev, regmap, p_raw_auto_start[i]); + if (IS_ERR(wiz->p_raw_auto_start[i])) { + dev_err(dev, "P%d_RAW_AUTO_START reg field init fail\n", + i); + return PTR_ERR(wiz->p_raw_auto_start[i]); + } + + wiz->p_standard_mode[i] = + devm_regmap_field_alloc(dev, regmap, p_standard_mode[i]); + if (IS_ERR(wiz->p_standard_mode[i])) { + dev_err(dev, "P%d_STANDARD_MODE reg field init fail\n", + i); + return PTR_ERR(wiz->p_standard_mode[i]); + } + } + + wiz->typec_ln10_swap = devm_regmap_field_alloc(dev, regmap, + typec_ln10_swap); + if (IS_ERR(wiz->typec_ln10_swap)) { + dev_err(dev, "LN10_SWAP reg field init failed\n"); + return PTR_ERR(wiz->typec_ln10_swap); + } + + return 0; +} + +static u8 wiz_clk_mux_get_parent(struct clk_hw *hw) +{ + struct wiz_clk_mux *mux = to_wiz_clk_mux(hw); + struct regmap_field *field = mux->field; + unsigned int val; + + regmap_field_read(field, &val); + return clk_mux_val_to_index(hw, mux->table, 0, val); +} + +static int wiz_clk_mux_set_parent(struct clk_hw *hw, u8 index) +{ + struct wiz_clk_mux *mux = to_wiz_clk_mux(hw); + struct regmap_field *field = mux->field; + int val; + + val = mux->table[index]; + return regmap_field_write(field, val); +} + +static const struct clk_ops wiz_clk_mux_ops = { + .set_parent = wiz_clk_mux_set_parent, + .get_parent = wiz_clk_mux_get_parent, +}; + +static int wiz_mux_clk_register(struct wiz *wiz, struct device_node *node, + struct regmap_field *field, u32 *table) +{ + struct device *dev = wiz->dev; + struct clk_init_data *init; + const char **parent_names; + unsigned int num_parents; + struct wiz_clk_mux *mux; + char clk_name[100]; + struct clk *clk; + int ret; + + mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL); + if (!mux) + return -ENOMEM; + + num_parents = of_clk_get_parent_count(node); + if (num_parents < 2) { + dev_err(dev, "SERDES clock must have parents\n"); + return -EINVAL; + } + + parent_names = devm_kzalloc(dev, (sizeof(char *) * num_parents), + GFP_KERNEL); + if (!parent_names) + return -ENOMEM; + + of_clk_parent_fill(node, parent_names, num_parents); + + snprintf(clk_name, sizeof(clk_name), "%s_%s", dev_name(dev), + node->name); + + init = &mux->clk_data; + + init->ops = &wiz_clk_mux_ops; + init->flags = CLK_SET_RATE_NO_REPARENT; + init->parent_names = parent_names; + init->num_parents = num_parents; + init->name = clk_name; + + mux->field = field; + mux->table = table; + mux->hw.init = init; + + clk = devm_clk_register(dev, &mux->hw); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + ret = of_clk_add_provider(node, of_clk_src_simple_get, clk); + if (ret) + dev_err(dev, "Failed to add clock provider: %s\n", clk_name); + + return ret; +} + +static unsigned long wiz_clk_div_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct wiz_clk_divider *div = to_wiz_clk_div(hw); + struct regmap_field *field = div->field; + int val; + + regmap_field_read(field, &val); + + return divider_recalc_rate(hw, parent_rate, val, div->table, 0x0, 2); +} + +static long wiz_clk_div_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + struct wiz_clk_divider *div = to_wiz_clk_div(hw); + + return divider_round_rate(hw, rate, prate, div->table, 2, 0x0); +} + +static int wiz_clk_div_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct wiz_clk_divider *div = to_wiz_clk_div(hw); + struct regmap_field *field = div->field; + int val; + + val = divider_get_val(rate, parent_rate, div->table, 2, 0x0); + if (val < 0) + return val; + + return regmap_field_write(field, val); +} + +static const struct clk_ops wiz_clk_div_ops = { + .recalc_rate = wiz_clk_div_recalc_rate, + .round_rate = wiz_clk_div_round_rate, + .set_rate = wiz_clk_div_set_rate, +}; + +static int wiz_div_clk_register(struct wiz *wiz, struct device_node *node, + struct regmap_field *field, + struct clk_div_table *table) +{ + struct device *dev = wiz->dev; + struct wiz_clk_divider *div; + struct clk_init_data *init; + const char **parent_names; + char clk_name[100]; + struct clk *clk; + int ret; + + div = devm_kzalloc(dev, sizeof(*div), GFP_KERNEL); + if (!div) + return -ENOMEM; + + snprintf(clk_name, sizeof(clk_name), "%s_%s", dev_name(dev), + node->name); + + parent_names = devm_kzalloc(dev, sizeof(char *), GFP_KERNEL); + if (!parent_names) + return -ENOMEM; + + of_clk_parent_fill(node, parent_names, 1); + + init = &div->clk_data; + + init->ops = &wiz_clk_div_ops; + init->flags = 0; + init->parent_names = parent_names; + init->num_parents = 1; + init->name = clk_name; + + div->field = field; + div->table = table; + div->hw.init = init; + + clk = devm_clk_register(dev, &div->hw); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + ret = of_clk_add_provider(node, of_clk_src_simple_get, clk); + if (ret) + dev_err(dev, "Failed to add clock provider: %s\n", clk_name); + + return ret; +} + +static void wiz_clock_cleanup(struct wiz *wiz, struct device_node *node) +{ + struct wiz_clk_mux_sel *clk_mux_sel = wiz->clk_mux_sel; + struct device_node *clk_node; + int i; + + for (i = 0; i < WIZ_MUX_NUM_CLOCKS; i++) { + clk_node = of_get_child_by_name(node, clk_mux_sel[i].node_name); + of_clk_del_provider(clk_node); + of_node_put(clk_node); + } +} + +static int wiz_clock_init(struct wiz *wiz, struct device_node *node) +{ + struct wiz_clk_mux_sel *clk_mux_sel = wiz->clk_mux_sel; + struct device *dev = wiz->dev; + struct device_node *clk_node; + const char *node_name; + unsigned long rate; + struct clk *clk; + int ret; + int i; + + clk = devm_clk_get(dev, "core_ref_clk"); + if (IS_ERR(clk)) { + dev_err(dev, "core_ref_clk clock not found\n"); + ret = PTR_ERR(clk); + return ret; + } + + rate = clk_get_rate(clk); + if (rate >= 100000000) + regmap_field_write(wiz->pma_cmn_refclk_int_mode, 0x1); + else + regmap_field_write(wiz->pma_cmn_refclk_int_mode, 0x3); + + clk = devm_clk_get(dev, "ext_ref_clk"); + if (IS_ERR(clk)) { + dev_err(dev, "ext_ref_clk clock not found\n"); + ret = PTR_ERR(clk); + return ret; + } + + rate = clk_get_rate(clk); + if (rate >= 100000000) + regmap_field_write(wiz->pma_cmn_refclk_mode, 0x0); + else + regmap_field_write(wiz->pma_cmn_refclk_mode, 0x2); + + for (i = 0; i < WIZ_MUX_NUM_CLOCKS; i++) { + node_name = clk_mux_sel[i].node_name; + clk_node = of_get_child_by_name(node, node_name); + if (!clk_node) { + dev_err(dev, "Unable to get %s node\n", node_name); + ret = -EINVAL; + goto err; + } + + ret = wiz_mux_clk_register(wiz, clk_node, clk_mux_sel[i].field, + clk_mux_sel[i].table); + if (ret) { + dev_err(dev, "Failed to register %s clock\n", + node_name); + of_node_put(clk_node); + goto err; + } + + of_node_put(clk_node); + } + + for (i = 0; i < wiz->clk_div_sel_num; i++) { + node_name = clk_div_sel[i].node_name; + clk_node = of_get_child_by_name(node, node_name); + if (!clk_node) { + dev_err(dev, "Unable to get %s node\n", node_name); + ret = -EINVAL; + goto err; + } + + ret = wiz_div_clk_register(wiz, clk_node, clk_div_sel[i].field, + clk_div_sel[i].table); + if (ret) { + dev_err(dev, "Failed to register %s clock\n", + node_name); + of_node_put(clk_node); + goto err; + } + + of_node_put(clk_node); + } + + return 0; +err: + wiz_clock_cleanup(wiz, node); + + return ret; +} + +static int wiz_phy_reset_assert(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct device *dev = rcdev->dev; + struct wiz *wiz = dev_get_drvdata(dev); + int ret = 0; + + if (id == 0) { + ret = regmap_field_write(wiz->phy_reset_n, false); + return ret; + } + + ret = regmap_field_write(wiz->p_enable[id - 1], false); + return ret; +} + +static int wiz_phy_reset_deassert(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct device *dev = rcdev->dev; + struct wiz *wiz = dev_get_drvdata(dev); + int ret; + + /* if typec-dir gpio was specified, set LN10 SWAP bit based on that */ + if (id == 0 && wiz->gpio_typec_dir) { + if (wiz->typec_dir_delay) + msleep_interruptible(wiz->typec_dir_delay); + + if (gpiod_get_value_cansleep(wiz->gpio_typec_dir)) + regmap_field_write(wiz->typec_ln10_swap, 1); + else + regmap_field_write(wiz->typec_ln10_swap, 0); + } + + if (id == 0) { + ret = regmap_field_write(wiz->phy_reset_n, true); + return ret; + } + + ret = regmap_field_write(wiz->p_enable[id - 1], true); + return ret; +} + +static const struct reset_control_ops wiz_phy_reset_ops = { + .assert = wiz_phy_reset_assert, + .deassert = wiz_phy_reset_deassert, +}; + +static struct regmap_config wiz_regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, + .fast_io = true, +}; + +static const struct of_device_id wiz_id_table[] = { + { + .compatible = "ti,j721e-wiz-16g", .data = (void *)J721E_WIZ_16G + }, + { + .compatible = "ti,j721e-wiz-10g", .data = (void *)J721E_WIZ_10G + }, + {} +}; +MODULE_DEVICE_TABLE(of, wiz_id_table); + +static int wiz_probe(struct platform_device *pdev) +{ + struct reset_controller_dev *phy_reset_dev; + struct device *dev = &pdev->dev; + struct device_node *node = dev->of_node; + struct platform_device *serdes_pdev; + struct device_node *child_node; + struct regmap *regmap; + struct resource res; + void __iomem *base; + struct wiz *wiz; + u32 num_lanes; + int ret; + + wiz = devm_kzalloc(dev, sizeof(*wiz), GFP_KERNEL); + if (!wiz) + return -ENOMEM; + + wiz->type = (enum wiz_type)of_device_get_match_data(dev); + + child_node = of_get_child_by_name(node, "serdes"); + if (!child_node) { + dev_err(dev, "Failed to get SERDES child DT node\n"); + return -ENODEV; + } + + ret = of_address_to_resource(child_node, 0, &res); + if (ret) { + dev_err(dev, "Failed to get memory resource\n"); + goto err_addr_to_resource; + } + + base = devm_ioremap(dev, res.start, resource_size(&res)); + if (!base) + goto err_addr_to_resource; + + regmap = devm_regmap_init_mmio(dev, base, &wiz_regmap_config); + if (IS_ERR(regmap)) { + dev_err(dev, "Failed to initialize regmap\n"); + ret = PTR_ERR(regmap); + goto err_addr_to_resource; + } + + ret = of_property_read_u32(node, "num-lanes", &num_lanes); + if (ret) { + dev_err(dev, "Failed to read num-lanes property\n"); + goto err_addr_to_resource; + } + + if (num_lanes > WIZ_MAX_LANES) { + dev_err(dev, "Cannot support %d lanes\n", num_lanes); + goto err_addr_to_resource; + } + + wiz->gpio_typec_dir = devm_gpiod_get_optional(dev, "typec-dir", + GPIOD_IN); + if (IS_ERR(wiz->gpio_typec_dir)) { + ret = PTR_ERR(wiz->gpio_typec_dir); + if (ret != -EPROBE_DEFER) + dev_err(dev, "Failed to request typec-dir gpio: %d\n", + ret); + goto err_addr_to_resource; + } + + if (wiz->gpio_typec_dir) { + ret = of_property_read_u32(node, "typec-dir-debounce-ms", + &wiz->typec_dir_delay); + if (ret && ret != -EINVAL) { + dev_err(dev, "Invalid typec-dir-debounce property\n"); + goto err_addr_to_resource; + } + + /* use min. debounce from Type-C spec if not provided in DT */ + if (ret == -EINVAL) + wiz->typec_dir_delay = WIZ_TYPEC_DIR_DEBOUNCE_MIN; + + if (wiz->typec_dir_delay < WIZ_TYPEC_DIR_DEBOUNCE_MIN || + wiz->typec_dir_delay > WIZ_TYPEC_DIR_DEBOUNCE_MAX) { + dev_err(dev, "Invalid typec-dir-debounce property\n"); + goto err_addr_to_resource; + } + } + + wiz->dev = dev; + wiz->regmap = regmap; + wiz->num_lanes = num_lanes; + if (wiz->type == J721E_WIZ_10G) + wiz->clk_mux_sel = clk_mux_sel_10g; + else + wiz->clk_mux_sel = clk_mux_sel_16g; + + wiz->clk_div_sel = clk_div_sel; + + if (wiz->type == J721E_WIZ_10G) + wiz->clk_div_sel_num = WIZ_DIV_NUM_CLOCKS_10G; + else + wiz->clk_div_sel_num = WIZ_DIV_NUM_CLOCKS_16G; + + platform_set_drvdata(pdev, wiz); + + ret = wiz_regfield_init(wiz); + if (ret) { + dev_err(dev, "Failed to initialize regfields\n"); + goto err_addr_to_resource; + } + + phy_reset_dev = &wiz->wiz_phy_reset_dev; + phy_reset_dev->dev = dev; + phy_reset_dev->ops = &wiz_phy_reset_ops, + phy_reset_dev->owner = THIS_MODULE, + phy_reset_dev->of_node = node; + /* Reset for each of the lane and one for the entire SERDES */ + phy_reset_dev->nr_resets = num_lanes + 1; + + ret = devm_reset_controller_register(dev, phy_reset_dev); + if (ret < 0) { + dev_warn(dev, "Failed to register reset controller\n"); + goto err_addr_to_resource; + } + + pm_runtime_enable(dev); + ret = pm_runtime_get_sync(dev); + if (ret < 0) { + dev_err(dev, "pm_runtime_get_sync failed\n"); + goto err_get_sync; + } + + ret = wiz_clock_init(wiz, node); + if (ret < 0) { + dev_warn(dev, "Failed to initialize clocks\n"); + goto err_get_sync; + } + + serdes_pdev = of_platform_device_create(child_node, NULL, dev); + if (!serdes_pdev) { + dev_WARN(dev, "Unable to create SERDES platform device\n"); + goto err_pdev_create; + } + wiz->serdes_pdev = serdes_pdev; + + ret = wiz_init(wiz); + if (ret) { + dev_err(dev, "WIZ initialization failed\n"); + goto err_wiz_init; + } + + of_node_put(child_node); + return 0; + +err_wiz_init: + of_platform_device_destroy(&serdes_pdev->dev, NULL); + +err_pdev_create: + wiz_clock_cleanup(wiz, node); + +err_get_sync: + pm_runtime_put(dev); + pm_runtime_disable(dev); + +err_addr_to_resource: + of_node_put(child_node); + + return ret; +} + +static int wiz_remove(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *node = dev->of_node; + struct platform_device *serdes_pdev; + struct wiz *wiz; + + wiz = dev_get_drvdata(dev); + serdes_pdev = wiz->serdes_pdev; + + of_platform_device_destroy(&serdes_pdev->dev, NULL); + wiz_clock_cleanup(wiz, node); + pm_runtime_put(dev); + pm_runtime_disable(dev); + + return 0; +} + +static struct platform_driver wiz_driver = { + .probe = wiz_probe, + .remove = wiz_remove, + .driver = { + .name = "wiz", + .of_match_table = wiz_id_table, + }, +}; +module_platform_driver(wiz_driver); + +MODULE_AUTHOR("Texas Instruments Inc."); +MODULE_DESCRIPTION("TI J721E WIZ driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/ti/phy-ti-pipe3.c b/drivers/phy/ti/phy-ti-pipe3.c index edd6859afba8..a87946589eb7 100644 --- a/drivers/phy/ti/phy-ti-pipe3.c +++ b/drivers/phy/ti/phy-ti-pipe3.c @@ -850,6 +850,12 @@ static int ti_pipe3_probe(struct platform_device *pdev) static int ti_pipe3_remove(struct platform_device *pdev) { + struct ti_pipe3 *phy = platform_get_drvdata(pdev); + + if (phy->mode == PIPE3_MODE_SATA) { + clk_disable_unprepare(phy->refclk); + phy->sata_refclk_enabled = false; + } pm_runtime_disable(&pdev->dev); return 0; @@ -900,18 +906,8 @@ static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy) { if (!IS_ERR(phy->wkupclk)) clk_disable_unprepare(phy->wkupclk); - if (!IS_ERR(phy->refclk)) { + if (!IS_ERR(phy->refclk)) clk_disable_unprepare(phy->refclk); - /* - * SATA refclk needs an additional disable as we left it - * on in probe to avoid Errata i783 - */ - if (phy->sata_refclk_enabled) { - clk_disable_unprepare(phy->refclk); - phy->sata_refclk_enabled = false; - } - } - if (!IS_ERR(phy->div_clk)) clk_disable_unprepare(phy->div_clk); } diff --git a/drivers/thunderbolt/Kconfig b/drivers/thunderbolt/Kconfig index fd9adca898ff..1eb757e8df3b 100644 --- a/drivers/thunderbolt/Kconfig +++ b/drivers/thunderbolt/Kconfig @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0-only -menuconfig THUNDERBOLT - tristate "Thunderbolt support" +menuconfig USB4 + tristate "Unified support for USB4 and Thunderbolt" depends on PCI depends on X86 || COMPILE_TEST select APPLE_PROPERTIES if EFI_STUB && X86 @@ -9,9 +9,10 @@ menuconfig THUNDERBOLT select CRYPTO_HASH select NVMEM help - Thunderbolt Controller driver. This driver is required if you - want to hotplug Thunderbolt devices on Apple hardware or on PCs - with Intel Falcon Ridge or newer. + USB4 and Thunderbolt driver. USB4 is the public speficiation + based on Thunderbolt 3 protocol. This driver is required if + you want to hotplug Thunderbolt and USB4 compliant devices on + Apple hardware or on PCs with Intel Falcon Ridge or newer. To compile this driver a module, choose M here. The module will be called thunderbolt. diff --git a/drivers/thunderbolt/Makefile b/drivers/thunderbolt/Makefile index 001187c577bf..eae28dd45250 100644 --- a/drivers/thunderbolt/Makefile +++ b/drivers/thunderbolt/Makefile @@ -1,4 +1,4 @@ # SPDX-License-Identifier: GPL-2.0-only -obj-${CONFIG_THUNDERBOLT} := thunderbolt.o +obj-${CONFIG_USB4} := thunderbolt.o thunderbolt-objs := nhi.o nhi_ops.o ctl.o tb.o switch.o cap.o path.o tunnel.o eeprom.o -thunderbolt-objs += domain.o dma_port.o icm.o property.o xdomain.o lc.o +thunderbolt-objs += domain.o dma_port.o icm.o property.o xdomain.o lc.o tmu.o usb4.o diff --git a/drivers/thunderbolt/cap.c b/drivers/thunderbolt/cap.c index fdd77bb4628d..19db6cdc5b70 100644 --- a/drivers/thunderbolt/cap.c +++ b/drivers/thunderbolt/cap.c @@ -113,7 +113,16 @@ int tb_port_find_cap(struct tb_port *port, enum tb_port_cap cap) return ret; } -static int tb_switch_find_cap(struct tb_switch *sw, enum tb_switch_cap cap) +/** + * tb_switch_find_cap() - Find switch capability + * @sw Switch to find the capability for + * @cap: Capability to look + * + * Returns offset to start of capability or %-ENOENT if no such + * capability was found. Negative errno is returned if there was an + * error. + */ +int tb_switch_find_cap(struct tb_switch *sw, enum tb_switch_cap cap) { int offset = sw->config.first_cap_offset; diff --git a/drivers/thunderbolt/ctl.c b/drivers/thunderbolt/ctl.c index d97813e80e5f..f77ceae5c7d7 100644 --- a/drivers/thunderbolt/ctl.c +++ b/drivers/thunderbolt/ctl.c @@ -708,19 +708,26 @@ void tb_ctl_stop(struct tb_ctl *ctl) /* public interface, commands */ /** - * tb_cfg_error() - send error packet + * tb_cfg_ack_plug() - Ack hot plug/unplug event + * @ctl: Control channel to use + * @route: Router that originated the event + * @port: Port where the hot plug/unplug happened + * @unplug: Ack hot plug or unplug * - * Return: Returns 0 on success or an error code on failure. + * Call this as response for hot plug/unplug event to ack it. + * Returns %0 on success or an error code on failure. */ -int tb_cfg_error(struct tb_ctl *ctl, u64 route, u32 port, - enum tb_cfg_error error) +int tb_cfg_ack_plug(struct tb_ctl *ctl, u64 route, u32 port, bool unplug) { struct cfg_error_pkg pkg = { .header = tb_cfg_make_header(route), .port = port, - .error = error, + .error = TB_CFG_ERROR_ACK_PLUG_EVENT, + .pg = unplug ? TB_CFG_ERROR_PG_HOT_UNPLUG + : TB_CFG_ERROR_PG_HOT_PLUG, }; - tb_ctl_dbg(ctl, "resetting error on %llx:%x.\n", route, port); + tb_ctl_dbg(ctl, "acking hot %splug event on %llx:%x\n", + unplug ? "un" : "", route, port); return tb_ctl_tx(ctl, &pkg, sizeof(pkg), TB_CFG_PKG_ERROR); } diff --git a/drivers/thunderbolt/ctl.h b/drivers/thunderbolt/ctl.h index 2f1a1e111110..97cb03b38953 100644 --- a/drivers/thunderbolt/ctl.h +++ b/drivers/thunderbolt/ctl.h @@ -123,8 +123,7 @@ static inline struct tb_cfg_header tb_cfg_make_header(u64 route) return header; } -int tb_cfg_error(struct tb_ctl *ctl, u64 route, u32 port, - enum tb_cfg_error error); +int tb_cfg_ack_plug(struct tb_ctl *ctl, u64 route, u32 port, bool unplug); struct tb_cfg_result tb_cfg_reset(struct tb_ctl *ctl, u64 route, int timeout_msec); struct tb_cfg_result tb_cfg_read_raw(struct tb_ctl *ctl, void *buffer, diff --git a/drivers/thunderbolt/eeprom.c b/drivers/thunderbolt/eeprom.c index 8dd7de0cc826..921d164b3f35 100644 --- a/drivers/thunderbolt/eeprom.c +++ b/drivers/thunderbolt/eeprom.c @@ -131,12 +131,51 @@ static int tb_eeprom_in(struct tb_switch *sw, u8 *val) } /** + * tb_eeprom_get_drom_offset - get drom offset within eeprom + */ +static int tb_eeprom_get_drom_offset(struct tb_switch *sw, u16 *offset) +{ + struct tb_cap_plug_events cap; + int res; + + if (!sw->cap_plug_events) { + tb_sw_warn(sw, "no TB_CAP_PLUG_EVENTS, cannot read eeprom\n"); + return -ENODEV; + } + res = tb_sw_read(sw, &cap, TB_CFG_SWITCH, sw->cap_plug_events, + sizeof(cap) / 4); + if (res) + return res; + + if (!cap.eeprom_ctl.present || cap.eeprom_ctl.not_present) { + tb_sw_warn(sw, "no NVM\n"); + return -ENODEV; + } + + if (cap.drom_offset > 0xffff) { + tb_sw_warn(sw, "drom offset is larger than 0xffff: %#x\n", + cap.drom_offset); + return -ENXIO; + } + *offset = cap.drom_offset; + return 0; +} + +/** * tb_eeprom_read_n - read count bytes from offset into val */ static int tb_eeprom_read_n(struct tb_switch *sw, u16 offset, u8 *val, size_t count) { + u16 drom_offset; int i, res; + + res = tb_eeprom_get_drom_offset(sw, &drom_offset); + if (res) + return res; + + offset += drom_offset; + res = tb_eeprom_active(sw, true); if (res) return res; @@ -239,36 +278,6 @@ struct tb_drom_entry_port { /** - * tb_eeprom_get_drom_offset - get drom offset within eeprom - */ -static int tb_eeprom_get_drom_offset(struct tb_switch *sw, u16 *offset) -{ - struct tb_cap_plug_events cap; - int res; - if (!sw->cap_plug_events) { - tb_sw_warn(sw, "no TB_CAP_PLUG_EVENTS, cannot read eeprom\n"); - return -ENOSYS; - } - res = tb_sw_read(sw, &cap, TB_CFG_SWITCH, sw->cap_plug_events, - sizeof(cap) / 4); - if (res) - return res; - - if (!cap.eeprom_ctl.present || cap.eeprom_ctl.not_present) { - tb_sw_warn(sw, "no NVM\n"); - return -ENOSYS; - } - - if (cap.drom_offset > 0xffff) { - tb_sw_warn(sw, "drom offset is larger than 0xffff: %#x\n", - cap.drom_offset); - return -ENXIO; - } - *offset = cap.drom_offset; - return 0; -} - -/** * tb_drom_read_uid_only - read uid directly from drom * * Does not use the cached copy in sw->drom. Used during resume to check switch @@ -277,17 +286,11 @@ static int tb_eeprom_get_drom_offset(struct tb_switch *sw, u16 *offset) int tb_drom_read_uid_only(struct tb_switch *sw, u64 *uid) { u8 data[9]; - u16 drom_offset; u8 crc; - int res = tb_eeprom_get_drom_offset(sw, &drom_offset); - if (res) - return res; - - if (drom_offset == 0) - return -ENODEV; + int res; /* read uid */ - res = tb_eeprom_read_n(sw, drom_offset, data, 9); + res = tb_eeprom_read_n(sw, 0, data, 9); if (res) return res; @@ -484,12 +487,42 @@ err_free: return ret; } +static int usb4_copy_host_drom(struct tb_switch *sw, u16 *size) +{ + int ret; + + ret = usb4_switch_drom_read(sw, 14, size, sizeof(*size)); + if (ret) + return ret; + + /* Size includes CRC8 + UID + CRC32 */ + *size += 1 + 8 + 4; + sw->drom = kzalloc(*size, GFP_KERNEL); + if (!sw->drom) + return -ENOMEM; + + ret = usb4_switch_drom_read(sw, 0, sw->drom, *size); + if (ret) { + kfree(sw->drom); + sw->drom = NULL; + } + + return ret; +} + +static int tb_drom_read_n(struct tb_switch *sw, u16 offset, u8 *val, + size_t count) +{ + if (tb_switch_is_usb4(sw)) + return usb4_switch_drom_read(sw, offset, val, count); + return tb_eeprom_read_n(sw, offset, val, count); +} + /** * tb_drom_read - copy drom to sw->drom and parse it */ int tb_drom_read(struct tb_switch *sw) { - u16 drom_offset; u16 size; u32 crc; struct tb_drom_header *header; @@ -510,18 +543,26 @@ int tb_drom_read(struct tb_switch *sw) goto parse; /* - * The root switch contains only a dummy drom (header only, - * no entries). Hardcode the configuration here. + * USB4 hosts may support reading DROM through router + * operations. */ - tb_drom_read_uid_only(sw, &sw->uid); + if (tb_switch_is_usb4(sw)) { + usb4_switch_read_uid(sw, &sw->uid); + if (!usb4_copy_host_drom(sw, &size)) + goto parse; + } else { + /* + * The root switch contains only a dummy drom + * (header only, no entries). Hardcode the + * configuration here. + */ + tb_drom_read_uid_only(sw, &sw->uid); + } + return 0; } - res = tb_eeprom_get_drom_offset(sw, &drom_offset); - if (res) - return res; - - res = tb_eeprom_read_n(sw, drom_offset + 14, (u8 *) &size, 2); + res = tb_drom_read_n(sw, 14, (u8 *) &size, 2); if (res) return res; size &= 0x3ff; @@ -535,7 +576,7 @@ int tb_drom_read(struct tb_switch *sw) sw->drom = kzalloc(size, GFP_KERNEL); if (!sw->drom) return -ENOMEM; - res = tb_eeprom_read_n(sw, drom_offset, sw->drom, size); + res = tb_drom_read_n(sw, 0, sw->drom, size); if (res) goto err; diff --git a/drivers/thunderbolt/nhi.c b/drivers/thunderbolt/nhi.c index 641b21b54460..1be491ecbb45 100644 --- a/drivers/thunderbolt/nhi.c +++ b/drivers/thunderbolt/nhi.c @@ -1271,6 +1271,9 @@ static struct pci_device_id nhi_ids[] = { { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICL_NHI1), .driver_data = (kernel_ulong_t)&icl_nhi_ops }, + /* Any USB4 compliant host */ + { PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_USB4, ~0) }, + { 0,} }; diff --git a/drivers/thunderbolt/nhi.h b/drivers/thunderbolt/nhi.h index b7b973949f8e..5d276ee9b38e 100644 --- a/drivers/thunderbolt/nhi.h +++ b/drivers/thunderbolt/nhi.h @@ -74,4 +74,6 @@ extern const struct tb_nhi_ops icl_nhi_ops; #define PCI_DEVICE_ID_INTEL_ICL_NHI1 0x8a0d #define PCI_DEVICE_ID_INTEL_ICL_NHI0 0x8a17 +#define PCI_CLASS_SERIAL_USB_USB4 0x0c0340 + #endif diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c index ca86a8e09c77..ad5479f21174 100644 --- a/drivers/thunderbolt/switch.c +++ b/drivers/thunderbolt/switch.c @@ -163,10 +163,12 @@ static int nvm_validate_and_write(struct tb_switch *sw) image_size -= hdr_size; } + if (tb_switch_is_usb4(sw)) + return usb4_switch_nvm_write(sw, 0, buf, image_size); return dma_port_flash_write(sw->dma_port, 0, buf, image_size); } -static int nvm_authenticate_host(struct tb_switch *sw) +static int nvm_authenticate_host_dma_port(struct tb_switch *sw) { int ret = 0; @@ -206,7 +208,7 @@ static int nvm_authenticate_host(struct tb_switch *sw) return ret; } -static int nvm_authenticate_device(struct tb_switch *sw) +static int nvm_authenticate_device_dma_port(struct tb_switch *sw) { int ret, retries = 10; @@ -251,6 +253,78 @@ static int nvm_authenticate_device(struct tb_switch *sw) return -ETIMEDOUT; } +static void nvm_authenticate_start_dma_port(struct tb_switch *sw) +{ + struct pci_dev *root_port; + + /* + * During host router NVM upgrade we should not allow root port to + * go into D3cold because some root ports cannot trigger PME + * itself. To be on the safe side keep the root port in D0 during + * the whole upgrade process. + */ + root_port = pci_find_pcie_root_port(sw->tb->nhi->pdev); + if (root_port) + pm_runtime_get_noresume(&root_port->dev); +} + +static void nvm_authenticate_complete_dma_port(struct tb_switch *sw) +{ + struct pci_dev *root_port; + + root_port = pci_find_pcie_root_port(sw->tb->nhi->pdev); + if (root_port) + pm_runtime_put(&root_port->dev); +} + +static inline bool nvm_readable(struct tb_switch *sw) +{ + if (tb_switch_is_usb4(sw)) { + /* + * USB4 devices must support NVM operations but it is + * optional for hosts. Therefore we query the NVM sector + * size here and if it is supported assume NVM + * operations are implemented. + */ + return usb4_switch_nvm_sector_size(sw) > 0; + } + + /* Thunderbolt 2 and 3 devices support NVM through DMA port */ + return !!sw->dma_port; +} + +static inline bool nvm_upgradeable(struct tb_switch *sw) +{ + if (sw->no_nvm_upgrade) + return false; + return nvm_readable(sw); +} + +static inline int nvm_read(struct tb_switch *sw, unsigned int address, + void *buf, size_t size) +{ + if (tb_switch_is_usb4(sw)) + return usb4_switch_nvm_read(sw, address, buf, size); + return dma_port_flash_read(sw->dma_port, address, buf, size); +} + +static int nvm_authenticate(struct tb_switch *sw) +{ + int ret; + + if (tb_switch_is_usb4(sw)) + return usb4_switch_nvm_authenticate(sw); + + if (!tb_route(sw)) { + nvm_authenticate_start_dma_port(sw); + ret = nvm_authenticate_host_dma_port(sw); + } else { + ret = nvm_authenticate_device_dma_port(sw); + } + + return ret; +} + static int tb_switch_nvm_read(void *priv, unsigned int offset, void *val, size_t bytes) { @@ -264,7 +338,7 @@ static int tb_switch_nvm_read(void *priv, unsigned int offset, void *val, goto out; } - ret = dma_port_flash_read(sw->dma_port, offset, val, bytes); + ret = nvm_read(sw, offset, val, bytes); mutex_unlock(&sw->tb->lock); out: @@ -341,8 +415,20 @@ static int tb_switch_nvm_add(struct tb_switch *sw) u32 val; int ret; - if (!sw->dma_port) + if (!nvm_readable(sw)) + return 0; + + /* + * The NVM format of non-Intel hardware is not known so + * currently restrict NVM upgrade for Intel hardware. We may + * relax this in the future when we learn other NVM formats. + */ + if (sw->config.vendor_id != PCI_VENDOR_ID_INTEL) { + dev_info(&sw->dev, + "NVM format of vendor %#x is not known, disabling NVM upgrade\n", + sw->config.vendor_id); return 0; + } nvm = kzalloc(sizeof(*nvm), GFP_KERNEL); if (!nvm) @@ -358,8 +444,7 @@ static int tb_switch_nvm_add(struct tb_switch *sw) if (!sw->safe_mode) { u32 nvm_size, hdr_size; - ret = dma_port_flash_read(sw->dma_port, NVM_FLASH_SIZE, &val, - sizeof(val)); + ret = nvm_read(sw, NVM_FLASH_SIZE, &val, sizeof(val)); if (ret) goto err_ida; @@ -367,8 +452,7 @@ static int tb_switch_nvm_add(struct tb_switch *sw) nvm_size = (SZ_1M << (val & 7)) / 8; nvm_size = (nvm_size - hdr_size) / 2; - ret = dma_port_flash_read(sw->dma_port, NVM_VERSION, &val, - sizeof(val)); + ret = nvm_read(sw, NVM_VERSION, &val, sizeof(val)); if (ret) goto err_ida; @@ -620,6 +704,24 @@ int tb_port_clear_counter(struct tb_port *port, int counter) } /** + * tb_port_unlock() - Unlock downstream port + * @port: Port to unlock + * + * Needed for USB4 but can be called for any CIO/USB4 ports. Makes the + * downstream router accessible for CM. + */ +int tb_port_unlock(struct tb_port *port) +{ + if (tb_switch_is_icm(port->sw)) + return 0; + if (!tb_port_is_null(port)) + return -EINVAL; + if (tb_switch_is_usb4(port->sw)) + return usb4_port_unlock(port); + return 0; +} + +/** * tb_init_port() - initialize a port * * This is a helper method for tb_switch_alloc. Does not check or initialize @@ -650,6 +752,10 @@ static int tb_init_port(struct tb_port *port) port->cap_phy = cap; else tb_port_WARN(port, "non switch port without a PHY\n"); + + cap = tb_port_find_cap(port, TB_PORT_CAP_USB4); + if (cap > 0) + port->cap_usb4 = cap; } else if (port->port != 0) { cap = tb_port_find_cap(port, TB_PORT_CAP_ADAP); if (cap > 0) @@ -936,12 +1042,47 @@ bool tb_port_is_enabled(struct tb_port *port) case TB_TYPE_DP_HDMI_OUT: return tb_dp_port_is_enabled(port); + case TB_TYPE_USB3_UP: + case TB_TYPE_USB3_DOWN: + return tb_usb3_port_is_enabled(port); + default: return false; } } /** + * tb_usb3_port_is_enabled() - Is the USB3 adapter port enabled + * @port: USB3 adapter port to check + */ +bool tb_usb3_port_is_enabled(struct tb_port *port) +{ + u32 data; + + if (tb_port_read(port, &data, TB_CFG_PORT, + port->cap_adap + ADP_USB3_CS_0, 1)) + return false; + + return !!(data & ADP_USB3_CS_0_PE); +} + +/** + * tb_usb3_port_enable() - Enable USB3 adapter port + * @port: USB3 adapter port to enable + * @enable: Enable/disable the USB3 adapter + */ +int tb_usb3_port_enable(struct tb_port *port, bool enable) +{ + u32 word = enable ? (ADP_USB3_CS_0_PE | ADP_USB3_CS_0_V) + : ADP_USB3_CS_0_V; + + if (!port->cap_adap) + return -ENXIO; + return tb_port_write(port, &word, TB_CFG_PORT, + port->cap_adap + ADP_USB3_CS_0, 1); +} + +/** * tb_pci_port_is_enabled() - Is the PCIe adapter port enabled * @port: PCIe port to check */ @@ -1088,20 +1229,38 @@ int tb_dp_port_enable(struct tb_port *port, bool enable) /* switch utility functions */ -static void tb_dump_switch(struct tb *tb, struct tb_regs_switch_header *sw) +static const char *tb_switch_generation_name(const struct tb_switch *sw) +{ + switch (sw->generation) { + case 1: + return "Thunderbolt 1"; + case 2: + return "Thunderbolt 2"; + case 3: + return "Thunderbolt 3"; + case 4: + return "USB4"; + default: + return "Unknown"; + } +} + +static void tb_dump_switch(const struct tb *tb, const struct tb_switch *sw) { - tb_dbg(tb, " Switch: %x:%x (Revision: %d, TB Version: %d)\n", - sw->vendor_id, sw->device_id, sw->revision, - sw->thunderbolt_version); - tb_dbg(tb, " Max Port Number: %d\n", sw->max_port_number); + const struct tb_regs_switch_header *regs = &sw->config; + + tb_dbg(tb, " %s Switch: %x:%x (Revision: %d, TB Version: %d)\n", + tb_switch_generation_name(sw), regs->vendor_id, regs->device_id, + regs->revision, regs->thunderbolt_version); + tb_dbg(tb, " Max Port Number: %d\n", regs->max_port_number); tb_dbg(tb, " Config:\n"); tb_dbg(tb, " Upstream Port Number: %d Depth: %d Route String: %#llx Enabled: %d, PlugEventsDelay: %dms\n", - sw->upstream_port_number, sw->depth, - (((u64) sw->route_hi) << 32) | sw->route_lo, - sw->enabled, sw->plug_events_delay); + regs->upstream_port_number, regs->depth, + (((u64) regs->route_hi) << 32) | regs->route_lo, + regs->enabled, regs->plug_events_delay); tb_dbg(tb, " unknown1: %#x unknown4: %#x\n", - sw->__unknown1, sw->__unknown4); + regs->__unknown1, regs->__unknown4); } /** @@ -1148,6 +1307,10 @@ static int tb_plug_events_active(struct tb_switch *sw, bool active) if (res) return res; + /* Plug events are always enabled in USB4 */ + if (tb_switch_is_usb4(sw)) + return 0; + res = tb_sw_read(sw, &data, TB_CFG_SWITCH, sw->cap_plug_events + 1, 1); if (res) return res; @@ -1359,30 +1522,6 @@ static ssize_t lanes_show(struct device *dev, struct device_attribute *attr, static DEVICE_ATTR(rx_lanes, 0444, lanes_show, NULL); static DEVICE_ATTR(tx_lanes, 0444, lanes_show, NULL); -static void nvm_authenticate_start(struct tb_switch *sw) -{ - struct pci_dev *root_port; - - /* - * During host router NVM upgrade we should not allow root port to - * go into D3cold because some root ports cannot trigger PME - * itself. To be on the safe side keep the root port in D0 during - * the whole upgrade process. - */ - root_port = pci_find_pcie_root_port(sw->tb->nhi->pdev); - if (root_port) - pm_runtime_get_noresume(&root_port->dev); -} - -static void nvm_authenticate_complete(struct tb_switch *sw) -{ - struct pci_dev *root_port; - - root_port = pci_find_pcie_root_port(sw->tb->nhi->pdev); - if (root_port) - pm_runtime_put(&root_port->dev); -} - static ssize_t nvm_authenticate_show(struct device *dev, struct device_attribute *attr, char *buf) { @@ -1431,17 +1570,7 @@ static ssize_t nvm_authenticate_store(struct device *dev, goto exit_unlock; sw->nvm->authenticating = true; - - if (!tb_route(sw)) { - /* - * Keep root port from suspending as long as the - * NVM upgrade process is running. - */ - nvm_authenticate_start(sw); - ret = nvm_authenticate_host(sw); - } else { - ret = nvm_authenticate_device(sw); - } + ret = nvm_authenticate(sw); } exit_unlock: @@ -1556,11 +1685,11 @@ static umode_t switch_attr_is_visible(struct kobject *kobj, return attr->mode; return 0; } else if (attr == &dev_attr_nvm_authenticate.attr) { - if (sw->dma_port && !sw->no_nvm_upgrade) + if (nvm_upgradeable(sw)) return attr->mode; return 0; } else if (attr == &dev_attr_nvm_version.attr) { - if (sw->dma_port) + if (nvm_readable(sw)) return attr->mode; return 0; } else if (attr == &dev_attr_boot.attr) { @@ -1672,6 +1801,9 @@ static int tb_switch_get_generation(struct tb_switch *sw) return 3; default: + if (tb_switch_is_usb4(sw)) + return 4; + /* * For unknown switches assume generation to be 1 to be * on the safe side. @@ -1682,6 +1814,19 @@ static int tb_switch_get_generation(struct tb_switch *sw) } } +static bool tb_switch_exceeds_max_depth(const struct tb_switch *sw, int depth) +{ + int max_depth; + + if (tb_switch_is_usb4(sw) || + (sw->tb->root_switch && tb_switch_is_usb4(sw->tb->root_switch))) + max_depth = USB4_SWITCH_MAX_DEPTH; + else + max_depth = TB_SWITCH_MAX_DEPTH; + + return depth > max_depth; +} + /** * tb_switch_alloc() - allocate a switch * @tb: Pointer to the owning domain @@ -1703,10 +1848,16 @@ struct tb_switch *tb_switch_alloc(struct tb *tb, struct device *parent, int upstream_port; int i, ret, depth; - /* Make sure we do not exceed maximum topology limit */ + /* Unlock the downstream port so we can access the switch below */ + if (route) { + struct tb_switch *parent_sw = tb_to_switch(parent); + struct tb_port *down; + + down = tb_port_at(route, parent_sw); + tb_port_unlock(down); + } + depth = tb_route_length(route); - if (depth > TB_SWITCH_MAX_DEPTH) - return ERR_PTR(-EADDRNOTAVAIL); upstream_port = tb_cfg_get_upstream_port(tb->ctl, route); if (upstream_port < 0) @@ -1721,8 +1872,10 @@ struct tb_switch *tb_switch_alloc(struct tb *tb, struct device *parent, if (ret) goto err_free_sw_ports; + sw->generation = tb_switch_get_generation(sw); + tb_dbg(tb, "current switch config:\n"); - tb_dump_switch(tb, &sw->config); + tb_dump_switch(tb, sw); /* configure switch */ sw->config.upstream_port_number = upstream_port; @@ -1731,6 +1884,12 @@ struct tb_switch *tb_switch_alloc(struct tb *tb, struct device *parent, sw->config.route_lo = lower_32_bits(route); sw->config.enabled = 0; + /* Make sure we do not exceed maximum topology limit */ + if (tb_switch_exceeds_max_depth(sw, depth)) { + ret = -EADDRNOTAVAIL; + goto err_free_sw_ports; + } + /* initialize ports */ sw->ports = kcalloc(sw->config.max_port_number + 1, sizeof(*sw->ports), GFP_KERNEL); @@ -1745,14 +1904,9 @@ struct tb_switch *tb_switch_alloc(struct tb *tb, struct device *parent, sw->ports[i].port = i; } - sw->generation = tb_switch_get_generation(sw); - ret = tb_switch_find_vse_cap(sw, TB_VSE_CAP_PLUG_EVENTS); - if (ret < 0) { - tb_sw_warn(sw, "cannot find TB_VSE_CAP_PLUG_EVENTS aborting\n"); - goto err_free_sw_ports; - } - sw->cap_plug_events = ret; + if (ret > 0) + sw->cap_plug_events = ret; ret = tb_switch_find_vse_cap(sw, TB_VSE_CAP_LINK_CONTROLLER); if (ret > 0) @@ -1823,7 +1977,8 @@ tb_switch_alloc_safe_mode(struct tb *tb, struct device *parent, u64 route) * * Call this function before the switch is added to the system. It will * upload configuration to the switch and makes it available for the - * connection manager to use. + * connection manager to use. Can be called to the switch again after + * resume from low power states to re-initialize it. * * Return: %0 in case of success and negative errno in case of failure */ @@ -1834,21 +1989,50 @@ int tb_switch_configure(struct tb_switch *sw) int ret; route = tb_route(sw); - tb_dbg(tb, "initializing Switch at %#llx (depth: %d, up port: %d)\n", - route, tb_route_length(route), sw->config.upstream_port_number); - if (sw->config.vendor_id != PCI_VENDOR_ID_INTEL) - tb_sw_warn(sw, "unknown switch vendor id %#x\n", - sw->config.vendor_id); + tb_dbg(tb, "%s Switch at %#llx (depth: %d, up port: %d)\n", + sw->config.enabled ? "restoring " : "initializing", route, + tb_route_length(route), sw->config.upstream_port_number); sw->config.enabled = 1; - /* upload configuration */ - ret = tb_sw_write(sw, 1 + (u32 *)&sw->config, TB_CFG_SWITCH, 1, 3); - if (ret) - return ret; + if (tb_switch_is_usb4(sw)) { + /* + * For USB4 devices, we need to program the CM version + * accordingly so that it knows to expose all the + * additional capabilities. + */ + sw->config.cmuv = USB4_VERSION_1_0; + + /* Enumerate the switch */ + ret = tb_sw_write(sw, (u32 *)&sw->config + 1, TB_CFG_SWITCH, + ROUTER_CS_1, 4); + if (ret) + return ret; + + ret = usb4_switch_setup(sw); + if (ret) + return ret; + + ret = usb4_switch_configure_link(sw); + } else { + if (sw->config.vendor_id != PCI_VENDOR_ID_INTEL) + tb_sw_warn(sw, "unknown switch vendor id %#x\n", + sw->config.vendor_id); - ret = tb_lc_configure_link(sw); + if (!sw->cap_plug_events) { + tb_sw_warn(sw, "cannot find TB_VSE_CAP_PLUG_EVENTS aborting\n"); + return -ENODEV; + } + + /* Enumerate the switch */ + ret = tb_sw_write(sw, (u32 *)&sw->config + 1, TB_CFG_SWITCH, + ROUTER_CS_1, 3); + if (ret) + return ret; + + ret = tb_lc_configure_link(sw); + } if (ret) return ret; @@ -1857,18 +2041,32 @@ int tb_switch_configure(struct tb_switch *sw) static int tb_switch_set_uuid(struct tb_switch *sw) { + bool uid = false; u32 uuid[4]; int ret; if (sw->uuid) return 0; - /* - * The newer controllers include fused UUID as part of link - * controller specific registers - */ - ret = tb_lc_read_uuid(sw, uuid); - if (ret) { + if (tb_switch_is_usb4(sw)) { + ret = usb4_switch_read_uid(sw, &sw->uid); + if (ret) + return ret; + uid = true; + } else { + /* + * The newer controllers include fused UUID as part of + * link controller specific registers + */ + ret = tb_lc_read_uuid(sw, uuid); + if (ret) { + if (ret != -EINVAL) + return ret; + uid = true; + } + } + + if (uid) { /* * ICM generates UUID based on UID and fills the upper * two words with ones. This is not strictly following @@ -1935,7 +2133,7 @@ static int tb_switch_add_dma_port(struct tb_switch *sw) nvm_get_auth_status(sw, &status); if (status) { if (!tb_route(sw)) - nvm_authenticate_complete(sw); + nvm_authenticate_complete_dma_port(sw); return 0; } @@ -1950,7 +2148,7 @@ static int tb_switch_add_dma_port(struct tb_switch *sw) /* Now we can allow root port to suspend again */ if (!tb_route(sw)) - nvm_authenticate_complete(sw); + nvm_authenticate_complete_dma_port(sw); if (status) { tb_sw_info(sw, "switch flash authentication failed\n"); @@ -2004,6 +2202,8 @@ static bool tb_switch_lane_bonding_possible(struct tb_switch *sw) if (!up->dual_link_port || !up->dual_link_port->remote) return false; + if (tb_switch_is_usb4(sw)) + return usb4_switch_lane_bonding_possible(sw); return tb_lc_lane_bonding_possible(sw); } @@ -2175,6 +2375,10 @@ int tb_switch_add(struct tb_switch *sw) ret = tb_switch_update_link_attributes(sw); if (ret) return ret; + + ret = tb_switch_tmu_init(sw); + if (ret) + return ret; } ret = device_add(&sw->dev); @@ -2240,7 +2444,11 @@ void tb_switch_remove(struct tb_switch *sw) if (!sw->is_unplugged) tb_plug_events_active(sw, false); - tb_lc_unconfigure_link(sw); + + if (tb_switch_is_usb4(sw)) + usb4_switch_unconfigure_link(sw); + else + tb_lc_unconfigure_link(sw); tb_switch_nvm_remove(sw); @@ -2298,7 +2506,10 @@ int tb_switch_resume(struct tb_switch *sw) return err; } - err = tb_drom_read_uid_only(sw, &uid); + if (tb_switch_is_usb4(sw)) + err = usb4_switch_read_uid(sw, &uid); + else + err = tb_drom_read_uid_only(sw, &uid); if (err) { tb_sw_warn(sw, "uid read failed\n"); return err; @@ -2311,16 +2522,7 @@ int tb_switch_resume(struct tb_switch *sw) } } - /* upload configuration */ - err = tb_sw_write(sw, 1 + (u32 *) &sw->config, TB_CFG_SWITCH, 1, 3); - if (err) - return err; - - err = tb_lc_configure_link(sw); - if (err) - return err; - - err = tb_plug_events_active(sw, true); + err = tb_switch_configure(sw); if (err) return err; @@ -2336,8 +2538,14 @@ int tb_switch_resume(struct tb_switch *sw) tb_sw_set_unplugged(port->remote->sw); else if (port->xdomain) port->xdomain->is_unplugged = true; - } else if (tb_port_has_remote(port)) { - if (tb_switch_resume(port->remote->sw)) { + } else if (tb_port_has_remote(port) || port->xdomain) { + /* + * Always unlock the port so the downstream + * switch/domain is accessible. + */ + if (tb_port_unlock(port)) + tb_port_warn(port, "failed to unlock port\n"); + if (port->remote && tb_switch_resume(port->remote->sw)) { tb_port_warn(port, "lost during suspend, disconnecting\n"); tb_sw_set_unplugged(port->remote->sw); @@ -2361,7 +2569,10 @@ void tb_switch_suspend(struct tb_switch *sw) tb_switch_suspend(port->remote->sw); } - tb_lc_set_sleep(sw); + if (tb_switch_is_usb4(sw)) + usb4_switch_set_sleep(sw); + else + tb_lc_set_sleep(sw); } /** @@ -2374,6 +2585,8 @@ void tb_switch_suspend(struct tb_switch *sw) */ bool tb_switch_query_dp_resource(struct tb_switch *sw, struct tb_port *in) { + if (tb_switch_is_usb4(sw)) + return usb4_switch_query_dp_resource(sw, in); return tb_lc_dp_sink_query(sw, in); } @@ -2388,6 +2601,8 @@ bool tb_switch_query_dp_resource(struct tb_switch *sw, struct tb_port *in) */ int tb_switch_alloc_dp_resource(struct tb_switch *sw, struct tb_port *in) { + if (tb_switch_is_usb4(sw)) + return usb4_switch_alloc_dp_resource(sw, in); return tb_lc_dp_sink_alloc(sw, in); } @@ -2401,10 +2616,16 @@ int tb_switch_alloc_dp_resource(struct tb_switch *sw, struct tb_port *in) */ void tb_switch_dealloc_dp_resource(struct tb_switch *sw, struct tb_port *in) { - if (tb_lc_dp_sink_dealloc(sw, in)) { + int ret; + + if (tb_switch_is_usb4(sw)) + ret = usb4_switch_dealloc_dp_resource(sw, in); + else + ret = tb_lc_dp_sink_dealloc(sw, in); + + if (ret) tb_sw_warn(sw, "failed to de-allocate DP resource for port %d\n", in->port); - } } struct tb_sw_lookup { @@ -2517,6 +2738,24 @@ struct tb_switch *tb_switch_find_by_route(struct tb *tb, u64 route) return NULL; } +/** + * tb_switch_find_port() - return the first port of @type on @sw or NULL + * @sw: Switch to find the port from + * @type: Port type to look for + */ +struct tb_port *tb_switch_find_port(struct tb_switch *sw, + enum tb_port_type type) +{ + struct tb_port *port; + + tb_switch_for_each_port(sw, port) { + if (port->config.type == type) + return port; + } + + return NULL; +} + void tb_switch_exit(void) { ida_destroy(&nvm_ida); diff --git a/drivers/thunderbolt/tb.c b/drivers/thunderbolt/tb.c index ea8727f769d6..107cd232f486 100644 --- a/drivers/thunderbolt/tb.c +++ b/drivers/thunderbolt/tb.c @@ -111,6 +111,10 @@ static void tb_discover_tunnels(struct tb_switch *sw) tunnel = tb_tunnel_discover_pci(tb, port); break; + case TB_TYPE_USB3_DOWN: + tunnel = tb_tunnel_discover_usb3(tb, port); + break; + default: break; } @@ -158,6 +162,137 @@ static void tb_scan_xdomain(struct tb_port *port) } } +static int tb_enable_tmu(struct tb_switch *sw) +{ + int ret; + + /* If it is already enabled in correct mode, don't touch it */ + if (tb_switch_tmu_is_enabled(sw)) + return 0; + + ret = tb_switch_tmu_disable(sw); + if (ret) + return ret; + + ret = tb_switch_tmu_post_time(sw); + if (ret) + return ret; + + return tb_switch_tmu_enable(sw); +} + +/** + * tb_find_unused_port() - return the first inactive port on @sw + * @sw: Switch to find the port on + * @type: Port type to look for + */ +static struct tb_port *tb_find_unused_port(struct tb_switch *sw, + enum tb_port_type type) +{ + struct tb_port *port; + + tb_switch_for_each_port(sw, port) { + if (tb_is_upstream_port(port)) + continue; + if (port->config.type != type) + continue; + if (!port->cap_adap) + continue; + if (tb_port_is_enabled(port)) + continue; + return port; + } + return NULL; +} + +static struct tb_port *tb_find_usb3_down(struct tb_switch *sw, + const struct tb_port *port) +{ + struct tb_port *down; + + down = usb4_switch_map_usb3_down(sw, port); + if (down) { + if (WARN_ON(!tb_port_is_usb3_down(down))) + goto out; + if (WARN_ON(tb_usb3_port_is_enabled(down))) + goto out; + + return down; + } + +out: + return tb_find_unused_port(sw, TB_TYPE_USB3_DOWN); +} + +static int tb_tunnel_usb3(struct tb *tb, struct tb_switch *sw) +{ + struct tb_switch *parent = tb_switch_parent(sw); + struct tb_port *up, *down, *port; + struct tb_cm *tcm = tb_priv(tb); + struct tb_tunnel *tunnel; + + up = tb_switch_find_port(sw, TB_TYPE_USB3_UP); + if (!up) + return 0; + + /* + * Look up available down port. Since we are chaining it should + * be found right above this switch. + */ + port = tb_port_at(tb_route(sw), parent); + down = tb_find_usb3_down(parent, port); + if (!down) + return 0; + + if (tb_route(parent)) { + struct tb_port *parent_up; + /* + * Check first that the parent switch has its upstream USB3 + * port enabled. Otherwise the chain is not complete and + * there is no point setting up a new tunnel. + */ + parent_up = tb_switch_find_port(parent, TB_TYPE_USB3_UP); + if (!parent_up || !tb_port_is_enabled(parent_up)) + return 0; + } + + tunnel = tb_tunnel_alloc_usb3(tb, up, down); + if (!tunnel) + return -ENOMEM; + + if (tb_tunnel_activate(tunnel)) { + tb_port_info(up, + "USB3 tunnel activation failed, aborting\n"); + tb_tunnel_free(tunnel); + return -EIO; + } + + list_add_tail(&tunnel->list, &tcm->tunnel_list); + return 0; +} + +static int tb_create_usb3_tunnels(struct tb_switch *sw) +{ + struct tb_port *port; + int ret; + + if (tb_route(sw)) { + ret = tb_tunnel_usb3(sw->tb, sw); + if (ret) + return ret; + } + + tb_switch_for_each_port(sw, port) { + if (!tb_port_has_remote(port)) + continue; + ret = tb_create_usb3_tunnels(port->remote->sw); + if (ret) + return ret; + } + + return 0; +} + static void tb_scan_port(struct tb_port *port); /** @@ -257,6 +392,18 @@ static void tb_scan_port(struct tb_port *port) if (tb_switch_lane_bonding_enable(sw)) tb_sw_warn(sw, "failed to enable lane bonding\n"); + if (tb_enable_tmu(sw)) + tb_sw_warn(sw, "failed to enable TMU\n"); + + /* + * Create USB 3.x tunnels only when the switch is plugged to the + * domain. This is because we scan the domain also during discovery + * and want to discover existing USB 3.x tunnels before we create + * any new. + */ + if (tcm->hotplug_active && tb_tunnel_usb3(sw->tb, sw)) + tb_sw_warn(sw, "USB3 tunnel creation failed\n"); + tb_scan_switch(sw); } @@ -338,57 +485,18 @@ static void tb_free_unplugged_children(struct tb_switch *sw) } } -/** - * tb_find_port() - return the first port of @type on @sw or NULL - * @sw: Switch to find the port from - * @type: Port type to look for - */ -static struct tb_port *tb_find_port(struct tb_switch *sw, - enum tb_port_type type) -{ - struct tb_port *port; - - tb_switch_for_each_port(sw, port) { - if (port->config.type == type) - return port; - } - - return NULL; -} - -/** - * tb_find_unused_port() - return the first inactive port on @sw - * @sw: Switch to find the port on - * @type: Port type to look for - */ -static struct tb_port *tb_find_unused_port(struct tb_switch *sw, - enum tb_port_type type) -{ - struct tb_port *port; - - tb_switch_for_each_port(sw, port) { - if (tb_is_upstream_port(port)) - continue; - if (port->config.type != type) - continue; - if (port->cap_adap) - continue; - if (tb_port_is_enabled(port)) - continue; - return port; - } - return NULL; -} - static struct tb_port *tb_find_pcie_down(struct tb_switch *sw, const struct tb_port *port) { + struct tb_port *down = NULL; + /* * To keep plugging devices consistently in the same PCIe - * hierarchy, do mapping here for root switch downstream PCIe - * ports. + * hierarchy, do mapping here for switch downstream PCIe ports. */ - if (!tb_route(sw)) { + if (tb_switch_is_usb4(sw)) { + down = usb4_switch_map_pcie_down(sw, port); + } else if (!tb_route(sw)) { int phy_port = tb_phy_port_from_link(port->port); int index; @@ -409,12 +517,17 @@ static struct tb_port *tb_find_pcie_down(struct tb_switch *sw, /* Validate the hard-coding */ if (WARN_ON(index > sw->config.max_port_number)) goto out; - if (WARN_ON(!tb_port_is_pcie_down(&sw->ports[index]))) + + down = &sw->ports[index]; + } + + if (down) { + if (WARN_ON(!tb_port_is_pcie_down(down))) goto out; - if (WARN_ON(tb_pci_port_is_enabled(&sw->ports[index]))) + if (WARN_ON(tb_pci_port_is_enabled(down))) goto out; - return &sw->ports[index]; + return down; } out: @@ -586,7 +699,7 @@ static int tb_tunnel_pci(struct tb *tb, struct tb_switch *sw) struct tb_switch *parent_sw; struct tb_tunnel *tunnel; - up = tb_find_port(sw, TB_TYPE_PCIE_UP); + up = tb_switch_find_port(sw, TB_TYPE_PCIE_UP); if (!up) return 0; @@ -624,7 +737,7 @@ static int tb_approve_xdomain_paths(struct tb *tb, struct tb_xdomain *xd) sw = tb_to_switch(xd->dev.parent); dst_port = tb_port_at(xd->route, sw); - nhi_port = tb_find_port(tb->root_switch, TB_TYPE_NHI); + nhi_port = tb_switch_find_port(tb->root_switch, TB_TYPE_NHI); mutex_lock(&tb->lock); tunnel = tb_tunnel_alloc_dma(tb, nhi_port, dst_port, xd->transmit_ring, @@ -719,6 +832,7 @@ static void tb_handle_hotplug(struct work_struct *work) tb_sw_set_unplugged(port->remote->sw); tb_free_invalid_tunnels(tb); tb_remove_dp_resources(port->remote->sw); + tb_switch_tmu_disable(port->remote->sw); tb_switch_lane_bonding_disable(port->remote->sw); tb_switch_remove(port->remote->sw); port->remote = NULL; @@ -786,8 +900,7 @@ static void tb_handle_event(struct tb *tb, enum tb_cfg_pkg_type type, route = tb_cfg_get_route(&pkg->header); - if (tb_cfg_error(tb->ctl, route, pkg->port, - TB_CFG_ERROR_ACK_PLUG_EVENT)) { + if (tb_cfg_ack_plug(tb->ctl, route, pkg->port, pkg->unplug)) { tb_warn(tb, "could not ack plug event on %llx:%x\n", route, pkg->port); } @@ -866,10 +979,17 @@ static int tb_start(struct tb *tb) return ret; } + /* Enable TMU if it is off */ + tb_switch_tmu_enable(tb->root_switch); /* Full scan to discover devices added before the driver was loaded. */ tb_scan_switch(tb->root_switch); /* Find out tunnels created by the boot firmware */ tb_discover_tunnels(tb->root_switch); + /* + * If the boot firmware did not create USB 3.x tunnels create them + * now for the whole topology. + */ + tb_create_usb3_tunnels(tb->root_switch); /* Add DP IN resources for the root switch */ tb_add_dp_resources(tb->root_switch); /* Make the discovered switches available to the userspace */ @@ -897,6 +1017,9 @@ static void tb_restore_children(struct tb_switch *sw) { struct tb_port *port; + if (tb_enable_tmu(sw)) + tb_sw_warn(sw, "failed to restore TMU configuration\n"); + tb_switch_for_each_port(sw, port) { if (!tb_port_has_remote(port)) continue; diff --git a/drivers/thunderbolt/tb.h b/drivers/thunderbolt/tb.h index ec851f20c571..2eb2bcd3cca3 100644 --- a/drivers/thunderbolt/tb.h +++ b/drivers/thunderbolt/tb.h @@ -44,6 +44,39 @@ struct tb_switch_nvm { #define TB_SWITCH_KEY_SIZE 32 #define TB_SWITCH_MAX_DEPTH 6 +#define USB4_SWITCH_MAX_DEPTH 5 + +/** + * enum tb_switch_tmu_rate - TMU refresh rate + * @TB_SWITCH_TMU_RATE_OFF: %0 (Disable Time Sync handshake) + * @TB_SWITCH_TMU_RATE_HIFI: %16 us time interval between successive + * transmission of the Delay Request TSNOS + * (Time Sync Notification Ordered Set) on a Link + * @TB_SWITCH_TMU_RATE_NORMAL: %1 ms time interval between successive + * transmission of the Delay Request TSNOS on + * a Link + */ +enum tb_switch_tmu_rate { + TB_SWITCH_TMU_RATE_OFF = 0, + TB_SWITCH_TMU_RATE_HIFI = 16, + TB_SWITCH_TMU_RATE_NORMAL = 1000, +}; + +/** + * struct tb_switch_tmu - Structure holding switch TMU configuration + * @cap: Offset to the TMU capability (%0 if not found) + * @has_ucap: Does the switch support uni-directional mode + * @rate: TMU refresh rate related to upstream switch. In case of root + * switch this holds the domain rate. + * @unidirectional: Is the TMU in uni-directional or bi-directional mode + * related to upstream switch. Don't case for root switch. + */ +struct tb_switch_tmu { + int cap; + bool has_ucap; + enum tb_switch_tmu_rate rate; + bool unidirectional; +}; /** * struct tb_switch - a thunderbolt switch @@ -54,6 +87,7 @@ struct tb_switch_nvm { * mailbox this will hold the pointer to that (%NULL * otherwise). If set it also means the switch has * upgradeable NVM. + * @tmu: The switch TMU configuration * @tb: Pointer to the domain the switch belongs to * @uid: Unique ID of the switch * @uuid: UUID of the switch (or %NULL if not supported) @@ -92,6 +126,7 @@ struct tb_switch { struct tb_regs_switch_header config; struct tb_port *ports; struct tb_dma_port *dma_port; + struct tb_switch_tmu tmu; struct tb *tb; u64 uid; uuid_t *uuid; @@ -128,7 +163,9 @@ struct tb_switch { * @remote: Remote port (%NULL if not connected) * @xdomain: Remote host (%NULL if not connected) * @cap_phy: Offset, zero if not found + * @cap_tmu: Offset of the adapter specific TMU capability (%0 if not present) * @cap_adap: Offset of the adapter specific capability (%0 if not present) + * @cap_usb4: Offset to the USB4 port capability (%0 if not present) * @port: Port number on switch * @disabled: Disabled by eeprom * @bonded: true if the port is bonded (two lanes combined as one) @@ -145,7 +182,9 @@ struct tb_port { struct tb_port *remote; struct tb_xdomain *xdomain; int cap_phy; + int cap_tmu; int cap_adap; + int cap_usb4; u8 port; bool disabled; bool bonded; @@ -393,6 +432,16 @@ static inline bool tb_port_is_dpout(const struct tb_port *port) return port && port->config.type == TB_TYPE_DP_HDMI_OUT; } +static inline bool tb_port_is_usb3_down(const struct tb_port *port) +{ + return port && port->config.type == TB_TYPE_USB3_DOWN; +} + +static inline bool tb_port_is_usb3_up(const struct tb_port *port) +{ + return port && port->config.type == TB_TYPE_USB3_UP; +} + static inline int tb_sw_read(struct tb_switch *sw, void *buffer, enum tb_cfg_space space, u32 offset, u32 length) { @@ -533,6 +582,8 @@ void tb_switch_suspend(struct tb_switch *sw); int tb_switch_resume(struct tb_switch *sw); int tb_switch_reset(struct tb *tb, u64 route); void tb_sw_set_unplugged(struct tb_switch *sw); +struct tb_port *tb_switch_find_port(struct tb_switch *sw, + enum tb_port_type type); struct tb_switch *tb_switch_find_by_link_depth(struct tb *tb, u8 link, u8 depth); struct tb_switch *tb_switch_find_by_uuid(struct tb *tb, const uuid_t *uuid); @@ -636,6 +687,17 @@ static inline bool tb_switch_is_titan_ridge(const struct tb_switch *sw) } /** + * tb_switch_is_usb4() - Is the switch USB4 compliant + * @sw: Switch to check + * + * Returns true if the @sw is USB4 compliant router, false otherwise. + */ +static inline bool tb_switch_is_usb4(const struct tb_switch *sw) +{ + return sw->config.thunderbolt_version == USB4_VERSION_1_0; +} + +/** * tb_switch_is_icm() - Is the switch handled by ICM firmware * @sw: Switch to check * @@ -656,10 +718,22 @@ bool tb_switch_query_dp_resource(struct tb_switch *sw, struct tb_port *in); int tb_switch_alloc_dp_resource(struct tb_switch *sw, struct tb_port *in); void tb_switch_dealloc_dp_resource(struct tb_switch *sw, struct tb_port *in); +int tb_switch_tmu_init(struct tb_switch *sw); +int tb_switch_tmu_post_time(struct tb_switch *sw); +int tb_switch_tmu_disable(struct tb_switch *sw); +int tb_switch_tmu_enable(struct tb_switch *sw); + +static inline bool tb_switch_tmu_is_enabled(const struct tb_switch *sw) +{ + return sw->tmu.rate == TB_SWITCH_TMU_RATE_HIFI && + !sw->tmu.unidirectional; +} + int tb_wait_for_port(struct tb_port *port, bool wait_if_unplugged); int tb_port_add_nfc_credits(struct tb_port *port, int credits); int tb_port_set_initial_credits(struct tb_port *port, u32 credits); int tb_port_clear_counter(struct tb_port *port, int counter); +int tb_port_unlock(struct tb_port *port); int tb_port_alloc_in_hopid(struct tb_port *port, int hopid, int max_hopid); void tb_port_release_in_hopid(struct tb_port *port, int hopid); int tb_port_alloc_out_hopid(struct tb_port *port, int hopid, int max_hopid); @@ -668,9 +742,13 @@ struct tb_port *tb_next_port_on_path(struct tb_port *start, struct tb_port *end, struct tb_port *prev); int tb_switch_find_vse_cap(struct tb_switch *sw, enum tb_switch_vse_cap vsec); +int tb_switch_find_cap(struct tb_switch *sw, enum tb_switch_cap cap); int tb_port_find_cap(struct tb_port *port, enum tb_port_cap cap); bool tb_port_is_enabled(struct tb_port *port); +bool tb_usb3_port_is_enabled(struct tb_port *port); +int tb_usb3_port_enable(struct tb_port *port, bool enable); + bool tb_pci_port_is_enabled(struct tb_port *port); int tb_pci_port_enable(struct tb_port *port, bool enable); @@ -734,4 +812,27 @@ void tb_xdomain_remove(struct tb_xdomain *xd); struct tb_xdomain *tb_xdomain_find_by_link_depth(struct tb *tb, u8 link, u8 depth); +int usb4_switch_setup(struct tb_switch *sw); +int usb4_switch_read_uid(struct tb_switch *sw, u64 *uid); +int usb4_switch_drom_read(struct tb_switch *sw, unsigned int address, void *buf, + size_t size); +int usb4_switch_configure_link(struct tb_switch *sw); +void usb4_switch_unconfigure_link(struct tb_switch *sw); +bool usb4_switch_lane_bonding_possible(struct tb_switch *sw); +int usb4_switch_set_sleep(struct tb_switch *sw); +int usb4_switch_nvm_sector_size(struct tb_switch *sw); +int usb4_switch_nvm_read(struct tb_switch *sw, unsigned int address, void *buf, + size_t size); +int usb4_switch_nvm_write(struct tb_switch *sw, unsigned int address, + const void *buf, size_t size); +int usb4_switch_nvm_authenticate(struct tb_switch *sw); +bool usb4_switch_query_dp_resource(struct tb_switch *sw, struct tb_port *in); +int usb4_switch_alloc_dp_resource(struct tb_switch *sw, struct tb_port *in); +int usb4_switch_dealloc_dp_resource(struct tb_switch *sw, struct tb_port *in); +struct tb_port *usb4_switch_map_pcie_down(struct tb_switch *sw, + const struct tb_port *port); +struct tb_port *usb4_switch_map_usb3_down(struct tb_switch *sw, + const struct tb_port *port); + +int usb4_port_unlock(struct tb_port *port); #endif diff --git a/drivers/thunderbolt/tb_msgs.h b/drivers/thunderbolt/tb_msgs.h index 3705057723b6..fc208c567953 100644 --- a/drivers/thunderbolt/tb_msgs.h +++ b/drivers/thunderbolt/tb_msgs.h @@ -67,9 +67,13 @@ struct cfg_error_pkg { u32 zero1:4; u32 port:6; u32 zero2:2; /* Both should be zero, still they are different fields. */ - u32 zero3:16; + u32 zero3:14; + u32 pg:2; } __packed; +#define TB_CFG_ERROR_PG_HOT_PLUG 0x2 +#define TB_CFG_ERROR_PG_HOT_UNPLUG 0x3 + /* TB_CFG_PKG_EVENT */ struct cfg_event_pkg { struct tb_cfg_header header; diff --git a/drivers/thunderbolt/tb_regs.h b/drivers/thunderbolt/tb_regs.h index 7ee45b73c7f7..c29c5075525a 100644 --- a/drivers/thunderbolt/tb_regs.h +++ b/drivers/thunderbolt/tb_regs.h @@ -26,6 +26,7 @@ #define TB_MAX_CONFIG_RW_LENGTH 60 enum tb_switch_cap { + TB_SWITCH_CAP_TMU = 0x03, TB_SWITCH_CAP_VSE = 0x05, }; @@ -41,6 +42,7 @@ enum tb_port_cap { TB_PORT_CAP_TIME1 = 0x03, TB_PORT_CAP_ADAP = 0x04, TB_PORT_CAP_VSE = 0x05, + TB_PORT_CAP_USB4 = 0x06, }; enum tb_port_state { @@ -164,10 +166,52 @@ struct tb_regs_switch_header { * milliseconds. Writing 0x00 is interpreted * as 255ms. */ - u32 __unknown4:16; + u32 cmuv:8; + u32 __unknown4:8; u32 thunderbolt_version:8; } __packed; +/* USB4 version 1.0 */ +#define USB4_VERSION_1_0 0x20 + +#define ROUTER_CS_1 0x01 +#define ROUTER_CS_4 0x04 +#define ROUTER_CS_5 0x05 +#define ROUTER_CS_5_SLP BIT(0) +#define ROUTER_CS_5_C3S BIT(23) +#define ROUTER_CS_5_PTO BIT(24) +#define ROUTER_CS_5_UTO BIT(25) +#define ROUTER_CS_5_HCO BIT(26) +#define ROUTER_CS_5_CV BIT(31) +#define ROUTER_CS_6 0x06 +#define ROUTER_CS_6_SLPR BIT(0) +#define ROUTER_CS_6_TNS BIT(1) +#define ROUTER_CS_6_HCI BIT(18) +#define ROUTER_CS_6_CR BIT(25) +#define ROUTER_CS_7 0x07 +#define ROUTER_CS_9 0x09 +#define ROUTER_CS_25 0x19 +#define ROUTER_CS_26 0x1a +#define ROUTER_CS_26_STATUS_MASK GENMASK(29, 24) +#define ROUTER_CS_26_STATUS_SHIFT 24 +#define ROUTER_CS_26_ONS BIT(30) +#define ROUTER_CS_26_OV BIT(31) + +/* Router TMU configuration */ +#define TMU_RTR_CS_0 0x00 +#define TMU_RTR_CS_0_TD BIT(27) +#define TMU_RTR_CS_0_UCAP BIT(30) +#define TMU_RTR_CS_1 0x01 +#define TMU_RTR_CS_1_LOCAL_TIME_NS_MASK GENMASK(31, 16) +#define TMU_RTR_CS_1_LOCAL_TIME_NS_SHIFT 16 +#define TMU_RTR_CS_2 0x02 +#define TMU_RTR_CS_3 0x03 +#define TMU_RTR_CS_3_LOCAL_TIME_NS_MASK GENMASK(15, 0) +#define TMU_RTR_CS_3_TS_PACKET_INTERVAL_MASK GENMASK(31, 16) +#define TMU_RTR_CS_3_TS_PACKET_INTERVAL_SHIFT 16 +#define TMU_RTR_CS_22 0x16 +#define TMU_RTR_CS_24 0x18 + enum tb_port_type { TB_TYPE_INACTIVE = 0x000000, TB_TYPE_PORT = 0x000001, @@ -178,7 +222,8 @@ enum tb_port_type { TB_TYPE_DP_HDMI_OUT = 0x0e0102, TB_TYPE_PCIE_DOWN = 0x100101, TB_TYPE_PCIE_UP = 0x100102, - /* TB_TYPE_USB = 0x200000, lower order bits are not known */ + TB_TYPE_USB3_DOWN = 0x200101, + TB_TYPE_USB3_UP = 0x200102, }; /* Present on every port in TB_CF_PORT at address zero. */ @@ -216,10 +261,15 @@ struct tb_regs_port_header { #define ADP_CS_4_NFC_BUFFERS_MASK GENMASK(9, 0) #define ADP_CS_4_TOTAL_BUFFERS_MASK GENMASK(29, 20) #define ADP_CS_4_TOTAL_BUFFERS_SHIFT 20 +#define ADP_CS_4_LCK BIT(31) #define ADP_CS_5 0x05 #define ADP_CS_5_LCA_MASK GENMASK(28, 22) #define ADP_CS_5_LCA_SHIFT 22 +/* TMU adapter registers */ +#define TMU_ADP_CS_3 0x03 +#define TMU_ADP_CS_3_UDM BIT(29) + /* Lane adapter registers */ #define LANE_ADP_CS_0 0x00 #define LANE_ADP_CS_0_SUPPORTED_WIDTH_MASK GENMASK(25, 20) @@ -237,6 +287,12 @@ struct tb_regs_port_header { #define LANE_ADP_CS_1_CURRENT_WIDTH_MASK GENMASK(25, 20) #define LANE_ADP_CS_1_CURRENT_WIDTH_SHIFT 20 +/* USB4 port registers */ +#define PORT_CS_18 0x12 +#define PORT_CS_18_BE BIT(8) +#define PORT_CS_19 0x13 +#define PORT_CS_19_PC BIT(3) + /* Display Port adapter registers */ #define ADP_DP_CS_0 0x00 #define ADP_DP_CS_0_VIDEO_HOPID_MASK GENMASK(26, 16) @@ -277,6 +333,11 @@ struct tb_regs_port_header { #define ADP_PCIE_CS_0 0x00 #define ADP_PCIE_CS_0_PE BIT(31) +/* USB adapter registers */ +#define ADP_USB3_CS_0 0x00 +#define ADP_USB3_CS_0_V BIT(30) +#define ADP_USB3_CS_0_PE BIT(31) + /* Hop register from TB_CFG_HOPS. 8 byte per entry. */ struct tb_regs_hop { /* DWORD 0 */ diff --git a/drivers/thunderbolt/tmu.c b/drivers/thunderbolt/tmu.c new file mode 100644 index 000000000000..039c42a06000 --- /dev/null +++ b/drivers/thunderbolt/tmu.c @@ -0,0 +1,383 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Thunderbolt Time Management Unit (TMU) support + * + * Copyright (C) 2019, Intel Corporation + * Authors: Mika Westerberg <mika.westerberg@linux.intel.com> + * Rajmohan Mani <rajmohan.mani@intel.com> + */ + +#include <linux/delay.h> + +#include "tb.h" + +static const char *tb_switch_tmu_mode_name(const struct tb_switch *sw) +{ + bool root_switch = !tb_route(sw); + + switch (sw->tmu.rate) { + case TB_SWITCH_TMU_RATE_OFF: + return "off"; + + case TB_SWITCH_TMU_RATE_HIFI: + /* Root switch does not have upstream directionality */ + if (root_switch) + return "HiFi"; + if (sw->tmu.unidirectional) + return "uni-directional, HiFi"; + return "bi-directional, HiFi"; + + case TB_SWITCH_TMU_RATE_NORMAL: + if (root_switch) + return "normal"; + return "uni-directional, normal"; + + default: + return "unknown"; + } +} + +static bool tb_switch_tmu_ucap_supported(struct tb_switch *sw) +{ + int ret; + u32 val; + + ret = tb_sw_read(sw, &val, TB_CFG_SWITCH, + sw->tmu.cap + TMU_RTR_CS_0, 1); + if (ret) + return false; + + return !!(val & TMU_RTR_CS_0_UCAP); +} + +static int tb_switch_tmu_rate_read(struct tb_switch *sw) +{ + int ret; + u32 val; + + ret = tb_sw_read(sw, &val, TB_CFG_SWITCH, + sw->tmu.cap + TMU_RTR_CS_3, 1); + if (ret) + return ret; + + val >>= TMU_RTR_CS_3_TS_PACKET_INTERVAL_SHIFT; + return val; +} + +static int tb_switch_tmu_rate_write(struct tb_switch *sw, int rate) +{ + int ret; + u32 val; + + ret = tb_sw_read(sw, &val, TB_CFG_SWITCH, + sw->tmu.cap + TMU_RTR_CS_3, 1); + if (ret) + return ret; + + val &= ~TMU_RTR_CS_3_TS_PACKET_INTERVAL_MASK; + val |= rate << TMU_RTR_CS_3_TS_PACKET_INTERVAL_SHIFT; + + return tb_sw_write(sw, &val, TB_CFG_SWITCH, + sw->tmu.cap + TMU_RTR_CS_3, 1); +} + +static int tb_port_tmu_write(struct tb_port *port, u8 offset, u32 mask, + u32 value) +{ + u32 data; + int ret; + + ret = tb_port_read(port, &data, TB_CFG_PORT, port->cap_tmu + offset, 1); + if (ret) + return ret; + + data &= ~mask; + data |= value; + + return tb_port_write(port, &data, TB_CFG_PORT, + port->cap_tmu + offset, 1); +} + +static int tb_port_tmu_set_unidirectional(struct tb_port *port, + bool unidirectional) +{ + u32 val; + + if (!port->sw->tmu.has_ucap) + return 0; + + val = unidirectional ? TMU_ADP_CS_3_UDM : 0; + return tb_port_tmu_write(port, TMU_ADP_CS_3, TMU_ADP_CS_3_UDM, val); +} + +static inline int tb_port_tmu_unidirectional_disable(struct tb_port *port) +{ + return tb_port_tmu_set_unidirectional(port, false); +} + +static bool tb_port_tmu_is_unidirectional(struct tb_port *port) +{ + int ret; + u32 val; + + ret = tb_port_read(port, &val, TB_CFG_PORT, + port->cap_tmu + TMU_ADP_CS_3, 1); + if (ret) + return false; + + return val & TMU_ADP_CS_3_UDM; +} + +static int tb_switch_tmu_set_time_disruption(struct tb_switch *sw, bool set) +{ + int ret; + u32 val; + + ret = tb_sw_read(sw, &val, TB_CFG_SWITCH, + sw->tmu.cap + TMU_RTR_CS_0, 1); + if (ret) + return ret; + + if (set) + val |= TMU_RTR_CS_0_TD; + else + val &= ~TMU_RTR_CS_0_TD; + + return tb_sw_write(sw, &val, TB_CFG_SWITCH, + sw->tmu.cap + TMU_RTR_CS_0, 1); +} + +/** + * tb_switch_tmu_init() - Initialize switch TMU structures + * @sw: Switch to initialized + * + * This function must be called before other TMU related functions to + * makes the internal structures are filled in correctly. Does not + * change any hardware configuration. + */ +int tb_switch_tmu_init(struct tb_switch *sw) +{ + struct tb_port *port; + int ret; + + if (tb_switch_is_icm(sw)) + return 0; + + ret = tb_switch_find_cap(sw, TB_SWITCH_CAP_TMU); + if (ret > 0) + sw->tmu.cap = ret; + + tb_switch_for_each_port(sw, port) { + int cap; + + cap = tb_port_find_cap(port, TB_PORT_CAP_TIME1); + if (cap > 0) + port->cap_tmu = cap; + } + + ret = tb_switch_tmu_rate_read(sw); + if (ret < 0) + return ret; + + sw->tmu.rate = ret; + + sw->tmu.has_ucap = tb_switch_tmu_ucap_supported(sw); + if (sw->tmu.has_ucap) { + tb_sw_dbg(sw, "TMU: supports uni-directional mode\n"); + + if (tb_route(sw)) { + struct tb_port *up = tb_upstream_port(sw); + + sw->tmu.unidirectional = + tb_port_tmu_is_unidirectional(up); + } + } else { + sw->tmu.unidirectional = false; + } + + tb_sw_dbg(sw, "TMU: current mode: %s\n", tb_switch_tmu_mode_name(sw)); + return 0; +} + +/** + * tb_switch_tmu_post_time() - Update switch local time + * @sw: Switch whose time to update + * + * Updates switch local time using time posting procedure. + */ +int tb_switch_tmu_post_time(struct tb_switch *sw) +{ + unsigned int post_local_time_offset, post_time_offset; + struct tb_switch *root_switch = sw->tb->root_switch; + u64 hi, mid, lo, local_time, post_time; + int i, ret, retries = 100; + u32 gm_local_time[3]; + + if (!tb_route(sw)) + return 0; + + if (!tb_switch_is_usb4(sw)) + return 0; + + /* Need to be able to read the grand master time */ + if (!root_switch->tmu.cap) + return 0; + + ret = tb_sw_read(root_switch, gm_local_time, TB_CFG_SWITCH, + root_switch->tmu.cap + TMU_RTR_CS_1, + ARRAY_SIZE(gm_local_time)); + if (ret) + return ret; + + for (i = 0; i < ARRAY_SIZE(gm_local_time); i++) + tb_sw_dbg(root_switch, "local_time[%d]=0x%08x\n", i, + gm_local_time[i]); + + /* Convert to nanoseconds (drop fractional part) */ + hi = gm_local_time[2] & TMU_RTR_CS_3_LOCAL_TIME_NS_MASK; + mid = gm_local_time[1]; + lo = (gm_local_time[0] & TMU_RTR_CS_1_LOCAL_TIME_NS_MASK) >> + TMU_RTR_CS_1_LOCAL_TIME_NS_SHIFT; + local_time = hi << 48 | mid << 16 | lo; + + /* Tell the switch that time sync is disrupted for a while */ + ret = tb_switch_tmu_set_time_disruption(sw, true); + if (ret) + return ret; + + post_local_time_offset = sw->tmu.cap + TMU_RTR_CS_22; + post_time_offset = sw->tmu.cap + TMU_RTR_CS_24; + + /* + * Write the Grandmaster time to the Post Local Time registers + * of the new switch. + */ + ret = tb_sw_write(sw, &local_time, TB_CFG_SWITCH, + post_local_time_offset, 2); + if (ret) + goto out; + + /* + * Have the new switch update its local time (by writing 1 to + * the post_time registers) and wait for the completion of the + * same (post_time register becomes 0). This means the time has + * been converged properly. + */ + post_time = 1; + + ret = tb_sw_write(sw, &post_time, TB_CFG_SWITCH, post_time_offset, 2); + if (ret) + goto out; + + do { + usleep_range(5, 10); + ret = tb_sw_read(sw, &post_time, TB_CFG_SWITCH, + post_time_offset, 2); + if (ret) + goto out; + } while (--retries && post_time); + + if (!retries) { + ret = -ETIMEDOUT; + goto out; + } + + tb_sw_dbg(sw, "TMU: updated local time to %#llx\n", local_time); + +out: + tb_switch_tmu_set_time_disruption(sw, false); + return ret; +} + +/** + * tb_switch_tmu_disable() - Disable TMU of a switch + * @sw: Switch whose TMU to disable + * + * Turns off TMU of @sw if it is enabled. If not enabled does nothing. + */ +int tb_switch_tmu_disable(struct tb_switch *sw) +{ + int ret; + + if (!tb_switch_is_usb4(sw)) + return 0; + + /* Already disabled? */ + if (sw->tmu.rate == TB_SWITCH_TMU_RATE_OFF) + return 0; + + if (sw->tmu.unidirectional) { + struct tb_switch *parent = tb_switch_parent(sw); + struct tb_port *up, *down; + + up = tb_upstream_port(sw); + down = tb_port_at(tb_route(sw), parent); + + /* The switch may be unplugged so ignore any errors */ + tb_port_tmu_unidirectional_disable(up); + ret = tb_port_tmu_unidirectional_disable(down); + if (ret) + return ret; + } + + tb_switch_tmu_rate_write(sw, TB_SWITCH_TMU_RATE_OFF); + + sw->tmu.unidirectional = false; + sw->tmu.rate = TB_SWITCH_TMU_RATE_OFF; + + tb_sw_dbg(sw, "TMU: disabled\n"); + return 0; +} + +/** + * tb_switch_tmu_enable() - Enable TMU on a switch + * @sw: Switch whose TMU to enable + * + * Enables TMU of a switch to be in bi-directional, HiFi mode. In this mode + * all tunneling should work. + */ +int tb_switch_tmu_enable(struct tb_switch *sw) +{ + int ret; + + if (!tb_switch_is_usb4(sw)) + return 0; + + if (tb_switch_tmu_is_enabled(sw)) + return 0; + + ret = tb_switch_tmu_set_time_disruption(sw, true); + if (ret) + return ret; + + /* Change mode to bi-directional */ + if (tb_route(sw) && sw->tmu.unidirectional) { + struct tb_switch *parent = tb_switch_parent(sw); + struct tb_port *up, *down; + + up = tb_upstream_port(sw); + down = tb_port_at(tb_route(sw), parent); + + ret = tb_port_tmu_unidirectional_disable(down); + if (ret) + return ret; + + ret = tb_switch_tmu_rate_write(sw, TB_SWITCH_TMU_RATE_HIFI); + if (ret) + return ret; + + ret = tb_port_tmu_unidirectional_disable(up); + if (ret) + return ret; + } else { + ret = tb_switch_tmu_rate_write(sw, TB_SWITCH_TMU_RATE_HIFI); + if (ret) + return ret; + } + + sw->tmu.unidirectional = false; + sw->tmu.rate = TB_SWITCH_TMU_RATE_HIFI; + tb_sw_dbg(sw, "TMU: mode set to: %s\n", tb_switch_tmu_mode_name(sw)); + + return tb_switch_tmu_set_time_disruption(sw, false); +} diff --git a/drivers/thunderbolt/tunnel.c b/drivers/thunderbolt/tunnel.c index 0d3463c4e24a..dbe90bcf4ad4 100644 --- a/drivers/thunderbolt/tunnel.c +++ b/drivers/thunderbolt/tunnel.c @@ -19,6 +19,12 @@ #define TB_PCI_PATH_DOWN 0 #define TB_PCI_PATH_UP 1 +/* USB3 adapters use always HopID of 8 for both directions */ +#define TB_USB3_HOPID 8 + +#define TB_USB3_PATH_DOWN 0 +#define TB_USB3_PATH_UP 1 + /* DP adapters use HopID 8 for AUX and 9 for Video */ #define TB_DP_AUX_TX_HOPID 8 #define TB_DP_AUX_RX_HOPID 8 @@ -31,7 +37,7 @@ #define TB_DMA_PATH_OUT 0 #define TB_DMA_PATH_IN 1 -static const char * const tb_tunnel_names[] = { "PCI", "DP", "DMA" }; +static const char * const tb_tunnel_names[] = { "PCI", "DP", "DMA", "USB3" }; #define __TB_TUNNEL_PRINT(level, tunnel, fmt, arg...) \ do { \ @@ -243,6 +249,12 @@ struct tb_tunnel *tb_tunnel_alloc_pci(struct tb *tb, struct tb_port *up, return tunnel; } +static bool tb_dp_is_usb4(const struct tb_switch *sw) +{ + /* Titan Ridge DP adapters need the same treatment as USB4 */ + return tb_switch_is_usb4(sw) || tb_switch_is_titan_ridge(sw); +} + static int tb_dp_cm_handshake(struct tb_port *in, struct tb_port *out) { int timeout = 10; @@ -250,8 +262,7 @@ static int tb_dp_cm_handshake(struct tb_port *in, struct tb_port *out) int ret; /* Both ends need to support this */ - if (!tb_switch_is_titan_ridge(in->sw) || - !tb_switch_is_titan_ridge(out->sw)) + if (!tb_dp_is_usb4(in->sw) || !tb_dp_is_usb4(out->sw)) return 0; ret = tb_port_read(out, &val, TB_CFG_PORT, @@ -531,7 +542,7 @@ static int tb_dp_consumed_bandwidth(struct tb_tunnel *tunnel) u32 val, rate = 0, lanes = 0; int ret; - if (tb_switch_is_titan_ridge(sw)) { + if (tb_dp_is_usb4(sw)) { int timeout = 10; /* @@ -843,6 +854,156 @@ struct tb_tunnel *tb_tunnel_alloc_dma(struct tb *tb, struct tb_port *nhi, return tunnel; } +static int tb_usb3_activate(struct tb_tunnel *tunnel, bool activate) +{ + int res; + + res = tb_usb3_port_enable(tunnel->src_port, activate); + if (res) + return res; + + if (tb_port_is_usb3_up(tunnel->dst_port)) + return tb_usb3_port_enable(tunnel->dst_port, activate); + + return 0; +} + +static void tb_usb3_init_path(struct tb_path *path) +{ + path->egress_fc_enable = TB_PATH_SOURCE | TB_PATH_INTERNAL; + path->egress_shared_buffer = TB_PATH_NONE; + path->ingress_fc_enable = TB_PATH_ALL; + path->ingress_shared_buffer = TB_PATH_NONE; + path->priority = 3; + path->weight = 3; + path->drop_packages = 0; + path->nfc_credits = 0; + path->hops[0].initial_credits = 7; + path->hops[1].initial_credits = + tb_initial_credits(path->hops[1].in_port->sw); +} + +/** + * tb_tunnel_discover_usb3() - Discover existing USB3 tunnels + * @tb: Pointer to the domain structure + * @down: USB3 downstream adapter + * + * If @down adapter is active, follows the tunnel to the USB3 upstream + * adapter and back. Returns the discovered tunnel or %NULL if there was + * no tunnel. + */ +struct tb_tunnel *tb_tunnel_discover_usb3(struct tb *tb, struct tb_port *down) +{ + struct tb_tunnel *tunnel; + struct tb_path *path; + + if (!tb_usb3_port_is_enabled(down)) + return NULL; + + tunnel = tb_tunnel_alloc(tb, 2, TB_TUNNEL_USB3); + if (!tunnel) + return NULL; + + tunnel->activate = tb_usb3_activate; + tunnel->src_port = down; + + /* + * Discover both paths even if they are not complete. We will + * clean them up by calling tb_tunnel_deactivate() below in that + * case. + */ + path = tb_path_discover(down, TB_USB3_HOPID, NULL, -1, + &tunnel->dst_port, "USB3 Up"); + if (!path) { + /* Just disable the downstream port */ + tb_usb3_port_enable(down, false); + goto err_free; + } + tunnel->paths[TB_USB3_PATH_UP] = path; + tb_usb3_init_path(tunnel->paths[TB_USB3_PATH_UP]); + + path = tb_path_discover(tunnel->dst_port, -1, down, TB_USB3_HOPID, NULL, + "USB3 Down"); + if (!path) + goto err_deactivate; + tunnel->paths[TB_USB3_PATH_DOWN] = path; + tb_usb3_init_path(tunnel->paths[TB_USB3_PATH_DOWN]); + + /* Validate that the tunnel is complete */ + if (!tb_port_is_usb3_up(tunnel->dst_port)) { + tb_port_warn(tunnel->dst_port, + "path does not end on an USB3 adapter, cleaning up\n"); + goto err_deactivate; + } + + if (down != tunnel->src_port) { + tb_tunnel_warn(tunnel, "path is not complete, cleaning up\n"); + goto err_deactivate; + } + + if (!tb_usb3_port_is_enabled(tunnel->dst_port)) { + tb_tunnel_warn(tunnel, + "tunnel is not fully activated, cleaning up\n"); + goto err_deactivate; + } + + tb_tunnel_dbg(tunnel, "discovered\n"); + return tunnel; + +err_deactivate: + tb_tunnel_deactivate(tunnel); +err_free: + tb_tunnel_free(tunnel); + + return NULL; +} + +/** + * tb_tunnel_alloc_usb3() - allocate a USB3 tunnel + * @tb: Pointer to the domain structure + * @up: USB3 upstream adapter port + * @down: USB3 downstream adapter port + * + * Allocate an USB3 tunnel. The ports must be of type @TB_TYPE_USB3_UP and + * @TB_TYPE_USB3_DOWN. + * + * Return: Returns a tb_tunnel on success or %NULL on failure. + */ +struct tb_tunnel *tb_tunnel_alloc_usb3(struct tb *tb, struct tb_port *up, + struct tb_port *down) +{ + struct tb_tunnel *tunnel; + struct tb_path *path; + + tunnel = tb_tunnel_alloc(tb, 2, TB_TUNNEL_USB3); + if (!tunnel) + return NULL; + + tunnel->activate = tb_usb3_activate; + tunnel->src_port = down; + tunnel->dst_port = up; + + path = tb_path_alloc(tb, down, TB_USB3_HOPID, up, TB_USB3_HOPID, 0, + "USB3 Down"); + if (!path) { + tb_tunnel_free(tunnel); + return NULL; + } + tb_usb3_init_path(path); + tunnel->paths[TB_USB3_PATH_DOWN] = path; + + path = tb_path_alloc(tb, up, TB_USB3_HOPID, down, TB_USB3_HOPID, 0, + "USB3 Up"); + if (!path) { + tb_tunnel_free(tunnel); + return NULL; + } + tb_usb3_init_path(path); + tunnel->paths[TB_USB3_PATH_UP] = path; + + return tunnel; +} + /** * tb_tunnel_free() - free a tunnel * @tunnel: Tunnel to be freed diff --git a/drivers/thunderbolt/tunnel.h b/drivers/thunderbolt/tunnel.h index ba888da005f5..3f5ba93225e7 100644 --- a/drivers/thunderbolt/tunnel.h +++ b/drivers/thunderbolt/tunnel.h @@ -15,6 +15,7 @@ enum tb_tunnel_type { TB_TUNNEL_PCI, TB_TUNNEL_DP, TB_TUNNEL_DMA, + TB_TUNNEL_USB3, }; /** @@ -57,6 +58,9 @@ struct tb_tunnel *tb_tunnel_alloc_dma(struct tb *tb, struct tb_port *nhi, struct tb_port *dst, int transmit_ring, int transmit_path, int receive_ring, int receive_path); +struct tb_tunnel *tb_tunnel_discover_usb3(struct tb *tb, struct tb_port *down); +struct tb_tunnel *tb_tunnel_alloc_usb3(struct tb *tb, struct tb_port *up, + struct tb_port *down); void tb_tunnel_free(struct tb_tunnel *tunnel); int tb_tunnel_activate(struct tb_tunnel *tunnel); @@ -82,5 +86,10 @@ static inline bool tb_tunnel_is_dma(const struct tb_tunnel *tunnel) return tunnel->type == TB_TUNNEL_DMA; } +static inline bool tb_tunnel_is_usb3(const struct tb_tunnel *tunnel) +{ + return tunnel->type == TB_TUNNEL_USB3; +} + #endif diff --git a/drivers/thunderbolt/usb4.c b/drivers/thunderbolt/usb4.c new file mode 100644 index 000000000000..b341fc60c4ba --- /dev/null +++ b/drivers/thunderbolt/usb4.c @@ -0,0 +1,764 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * USB4 specific functionality + * + * Copyright (C) 2019, Intel Corporation + * Authors: Mika Westerberg <mika.westerberg@linux.intel.com> + * Rajmohan Mani <rajmohan.mani@intel.com> + */ + +#include <linux/delay.h> +#include <linux/ktime.h> + +#include "tb.h" + +#define USB4_DATA_DWORDS 16 +#define USB4_DATA_RETRIES 3 + +enum usb4_switch_op { + USB4_SWITCH_OP_QUERY_DP_RESOURCE = 0x10, + USB4_SWITCH_OP_ALLOC_DP_RESOURCE = 0x11, + USB4_SWITCH_OP_DEALLOC_DP_RESOURCE = 0x12, + USB4_SWITCH_OP_NVM_WRITE = 0x20, + USB4_SWITCH_OP_NVM_AUTH = 0x21, + USB4_SWITCH_OP_NVM_READ = 0x22, + USB4_SWITCH_OP_NVM_SET_OFFSET = 0x23, + USB4_SWITCH_OP_DROM_READ = 0x24, + USB4_SWITCH_OP_NVM_SECTOR_SIZE = 0x25, +}; + +#define USB4_NVM_READ_OFFSET_MASK GENMASK(23, 2) +#define USB4_NVM_READ_OFFSET_SHIFT 2 +#define USB4_NVM_READ_LENGTH_MASK GENMASK(27, 24) +#define USB4_NVM_READ_LENGTH_SHIFT 24 + +#define USB4_NVM_SET_OFFSET_MASK USB4_NVM_READ_OFFSET_MASK +#define USB4_NVM_SET_OFFSET_SHIFT USB4_NVM_READ_OFFSET_SHIFT + +#define USB4_DROM_ADDRESS_MASK GENMASK(14, 2) +#define USB4_DROM_ADDRESS_SHIFT 2 +#define USB4_DROM_SIZE_MASK GENMASK(19, 15) +#define USB4_DROM_SIZE_SHIFT 15 + +#define USB4_NVM_SECTOR_SIZE_MASK GENMASK(23, 0) + +typedef int (*read_block_fn)(struct tb_switch *, unsigned int, void *, size_t); +typedef int (*write_block_fn)(struct tb_switch *, const void *, size_t); + +static int usb4_switch_wait_for_bit(struct tb_switch *sw, u32 offset, u32 bit, + u32 value, int timeout_msec) +{ + ktime_t timeout = ktime_add_ms(ktime_get(), timeout_msec); + + do { + u32 val; + int ret; + + ret = tb_sw_read(sw, &val, TB_CFG_SWITCH, offset, 1); + if (ret) + return ret; + + if ((val & bit) == value) + return 0; + + usleep_range(50, 100); + } while (ktime_before(ktime_get(), timeout)); + + return -ETIMEDOUT; +} + +static int usb4_switch_op_read_data(struct tb_switch *sw, void *data, + size_t dwords) +{ + if (dwords > USB4_DATA_DWORDS) + return -EINVAL; + + return tb_sw_read(sw, data, TB_CFG_SWITCH, ROUTER_CS_9, dwords); +} + +static int usb4_switch_op_write_data(struct tb_switch *sw, const void *data, + size_t dwords) +{ + if (dwords > USB4_DATA_DWORDS) + return -EINVAL; + + return tb_sw_write(sw, data, TB_CFG_SWITCH, ROUTER_CS_9, dwords); +} + +static int usb4_switch_op_read_metadata(struct tb_switch *sw, u32 *metadata) +{ + return tb_sw_read(sw, metadata, TB_CFG_SWITCH, ROUTER_CS_25, 1); +} + +static int usb4_switch_op_write_metadata(struct tb_switch *sw, u32 metadata) +{ + return tb_sw_write(sw, &metadata, TB_CFG_SWITCH, ROUTER_CS_25, 1); +} + +static int usb4_switch_do_read_data(struct tb_switch *sw, u16 address, + void *buf, size_t size, read_block_fn read_block) +{ + unsigned int retries = USB4_DATA_RETRIES; + unsigned int offset; + + offset = address & 3; + address = address & ~3; + + do { + size_t nbytes = min_t(size_t, size, USB4_DATA_DWORDS * 4); + unsigned int dwaddress, dwords; + u8 data[USB4_DATA_DWORDS * 4]; + int ret; + + dwaddress = address / 4; + dwords = ALIGN(nbytes, 4) / 4; + + ret = read_block(sw, dwaddress, data, dwords); + if (ret) { + if (ret == -ETIMEDOUT) { + if (retries--) + continue; + ret = -EIO; + } + return ret; + } + + memcpy(buf, data + offset, nbytes); + + size -= nbytes; + address += nbytes; + buf += nbytes; + } while (size > 0); + + return 0; +} + +static int usb4_switch_do_write_data(struct tb_switch *sw, u16 address, + const void *buf, size_t size, write_block_fn write_next_block) +{ + unsigned int retries = USB4_DATA_RETRIES; + unsigned int offset; + + offset = address & 3; + address = address & ~3; + + do { + u32 nbytes = min_t(u32, size, USB4_DATA_DWORDS * 4); + u8 data[USB4_DATA_DWORDS * 4]; + int ret; + + memcpy(data + offset, buf, nbytes); + + ret = write_next_block(sw, data, nbytes / 4); + if (ret) { + if (ret == -ETIMEDOUT) { + if (retries--) + continue; + ret = -EIO; + } + return ret; + } + + size -= nbytes; + address += nbytes; + buf += nbytes; + } while (size > 0); + + return 0; +} + +static int usb4_switch_op(struct tb_switch *sw, u16 opcode, u8 *status) +{ + u32 val; + int ret; + + val = opcode | ROUTER_CS_26_OV; + ret = tb_sw_write(sw, &val, TB_CFG_SWITCH, ROUTER_CS_26, 1); + if (ret) + return ret; + + ret = usb4_switch_wait_for_bit(sw, ROUTER_CS_26, ROUTER_CS_26_OV, 0, 500); + if (ret) + return ret; + + ret = tb_sw_read(sw, &val, TB_CFG_SWITCH, ROUTER_CS_26, 1); + if (val & ROUTER_CS_26_ONS) + return -EOPNOTSUPP; + + *status = (val & ROUTER_CS_26_STATUS_MASK) >> ROUTER_CS_26_STATUS_SHIFT; + return 0; +} + +/** + * usb4_switch_setup() - Additional setup for USB4 device + * @sw: USB4 router to setup + * + * USB4 routers need additional settings in order to enable all the + * tunneling. This function enables USB and PCIe tunneling if it can be + * enabled (e.g the parent switch also supports them). If USB tunneling + * is not available for some reason (like that there is Thunderbolt 3 + * switch upstream) then the internal xHCI controller is enabled + * instead. + */ +int usb4_switch_setup(struct tb_switch *sw) +{ + struct tb_switch *parent; + bool tbt3, xhci; + u32 val = 0; + int ret; + + if (!tb_route(sw)) + return 0; + + ret = tb_sw_read(sw, &val, TB_CFG_SWITCH, ROUTER_CS_6, 1); + if (ret) + return ret; + + xhci = val & ROUTER_CS_6_HCI; + tbt3 = !(val & ROUTER_CS_6_TNS); + + tb_sw_dbg(sw, "TBT3 support: %s, xHCI: %s\n", + tbt3 ? "yes" : "no", xhci ? "yes" : "no"); + + ret = tb_sw_read(sw, &val, TB_CFG_SWITCH, ROUTER_CS_5, 1); + if (ret) + return ret; + + parent = tb_switch_parent(sw); + + if (tb_switch_find_port(parent, TB_TYPE_USB3_DOWN)) { + val |= ROUTER_CS_5_UTO; + xhci = false; + } + + /* Only enable PCIe tunneling if the parent router supports it */ + if (tb_switch_find_port(parent, TB_TYPE_PCIE_DOWN)) { + val |= ROUTER_CS_5_PTO; + /* + * xHCI can be enabled if PCIe tunneling is supported + * and the parent does not have any USB3 dowstream + * adapters (so we cannot do USB 3.x tunneling). + */ + if (xhci) + val |= ROUTER_CS_5_HCO; + } + + /* TBT3 supported by the CM */ + val |= ROUTER_CS_5_C3S; + /* Tunneling configuration is ready now */ + val |= ROUTER_CS_5_CV; + + ret = tb_sw_write(sw, &val, TB_CFG_SWITCH, ROUTER_CS_5, 1); + if (ret) + return ret; + + return usb4_switch_wait_for_bit(sw, ROUTER_CS_6, ROUTER_CS_6_CR, + ROUTER_CS_6_CR, 50); +} + +/** + * usb4_switch_read_uid() - Read UID from USB4 router + * @sw: USB4 router + * + * Reads 64-bit UID from USB4 router config space. + */ +int usb4_switch_read_uid(struct tb_switch *sw, u64 *uid) +{ + return tb_sw_read(sw, uid, TB_CFG_SWITCH, ROUTER_CS_7, 2); +} + +static int usb4_switch_drom_read_block(struct tb_switch *sw, + unsigned int dwaddress, void *buf, + size_t dwords) +{ + u8 status = 0; + u32 metadata; + int ret; + + metadata = (dwords << USB4_DROM_SIZE_SHIFT) & USB4_DROM_SIZE_MASK; + metadata |= (dwaddress << USB4_DROM_ADDRESS_SHIFT) & + USB4_DROM_ADDRESS_MASK; + + ret = usb4_switch_op_write_metadata(sw, metadata); + if (ret) + return ret; + + ret = usb4_switch_op(sw, USB4_SWITCH_OP_DROM_READ, &status); + if (ret) + return ret; + + if (status) + return -EIO; + + return usb4_switch_op_read_data(sw, buf, dwords); +} + +/** + * usb4_switch_drom_read() - Read arbitrary bytes from USB4 router DROM + * @sw: USB4 router + * + * Uses USB4 router operations to read router DROM. For devices this + * should always work but for hosts it may return %-EOPNOTSUPP in which + * case the host router does not have DROM. + */ +int usb4_switch_drom_read(struct tb_switch *sw, unsigned int address, void *buf, + size_t size) +{ + return usb4_switch_do_read_data(sw, address, buf, size, + usb4_switch_drom_read_block); +} + +static int usb4_set_port_configured(struct tb_port *port, bool configured) +{ + int ret; + u32 val; + + ret = tb_port_read(port, &val, TB_CFG_PORT, + port->cap_usb4 + PORT_CS_19, 1); + if (ret) + return ret; + + if (configured) + val |= PORT_CS_19_PC; + else + val &= ~PORT_CS_19_PC; + + return tb_port_write(port, &val, TB_CFG_PORT, + port->cap_usb4 + PORT_CS_19, 1); +} + +/** + * usb4_switch_configure_link() - Set upstream USB4 link configured + * @sw: USB4 router + * + * Sets the upstream USB4 link to be configured for power management + * purposes. + */ +int usb4_switch_configure_link(struct tb_switch *sw) +{ + struct tb_port *up; + + if (!tb_route(sw)) + return 0; + + up = tb_upstream_port(sw); + return usb4_set_port_configured(up, true); +} + +/** + * usb4_switch_unconfigure_link() - Un-set upstream USB4 link configuration + * @sw: USB4 router + * + * Reverse of usb4_switch_configure_link(). + */ +void usb4_switch_unconfigure_link(struct tb_switch *sw) +{ + struct tb_port *up; + + if (sw->is_unplugged || !tb_route(sw)) + return; + + up = tb_upstream_port(sw); + usb4_set_port_configured(up, false); +} + +/** + * usb4_switch_lane_bonding_possible() - Are conditions met for lane bonding + * @sw: USB4 router + * + * Checks whether conditions are met so that lane bonding can be + * established with the upstream router. Call only for device routers. + */ +bool usb4_switch_lane_bonding_possible(struct tb_switch *sw) +{ + struct tb_port *up; + int ret; + u32 val; + + up = tb_upstream_port(sw); + ret = tb_port_read(up, &val, TB_CFG_PORT, up->cap_usb4 + PORT_CS_18, 1); + if (ret) + return false; + + return !!(val & PORT_CS_18_BE); +} + +/** + * usb4_switch_set_sleep() - Prepare the router to enter sleep + * @sw: USB4 router + * + * Enables wakes and sets sleep bit for the router. Returns when the + * router sleep ready bit has been asserted. + */ +int usb4_switch_set_sleep(struct tb_switch *sw) +{ + int ret; + u32 val; + + /* Set sleep bit and wait for sleep ready to be asserted */ + ret = tb_sw_read(sw, &val, TB_CFG_SWITCH, ROUTER_CS_5, 1); + if (ret) + return ret; + + val |= ROUTER_CS_5_SLP; + + ret = tb_sw_write(sw, &val, TB_CFG_SWITCH, ROUTER_CS_5, 1); + if (ret) + return ret; + + return usb4_switch_wait_for_bit(sw, ROUTER_CS_6, ROUTER_CS_6_SLPR, + ROUTER_CS_6_SLPR, 500); +} + +/** + * usb4_switch_nvm_sector_size() - Return router NVM sector size + * @sw: USB4 router + * + * If the router supports NVM operations this function returns the NVM + * sector size in bytes. If NVM operations are not supported returns + * %-EOPNOTSUPP. + */ +int usb4_switch_nvm_sector_size(struct tb_switch *sw) +{ + u32 metadata; + u8 status; + int ret; + + ret = usb4_switch_op(sw, USB4_SWITCH_OP_NVM_SECTOR_SIZE, &status); + if (ret) + return ret; + + if (status) + return status == 0x2 ? -EOPNOTSUPP : -EIO; + + ret = usb4_switch_op_read_metadata(sw, &metadata); + if (ret) + return ret; + + return metadata & USB4_NVM_SECTOR_SIZE_MASK; +} + +static int usb4_switch_nvm_read_block(struct tb_switch *sw, + unsigned int dwaddress, void *buf, size_t dwords) +{ + u8 status = 0; + u32 metadata; + int ret; + + metadata = (dwords << USB4_NVM_READ_LENGTH_SHIFT) & + USB4_NVM_READ_LENGTH_MASK; + metadata |= (dwaddress << USB4_NVM_READ_OFFSET_SHIFT) & + USB4_NVM_READ_OFFSET_MASK; + + ret = usb4_switch_op_write_metadata(sw, metadata); + if (ret) + return ret; + + ret = usb4_switch_op(sw, USB4_SWITCH_OP_NVM_READ, &status); + if (ret) + return ret; + + if (status) + return -EIO; + + return usb4_switch_op_read_data(sw, buf, dwords); +} + +/** + * usb4_switch_nvm_read() - Read arbitrary bytes from router NVM + * @sw: USB4 router + * @address: Starting address in bytes + * @buf: Read data is placed here + * @size: How many bytes to read + * + * Reads NVM contents of the router. If NVM is not supported returns + * %-EOPNOTSUPP. + */ +int usb4_switch_nvm_read(struct tb_switch *sw, unsigned int address, void *buf, + size_t size) +{ + return usb4_switch_do_read_data(sw, address, buf, size, + usb4_switch_nvm_read_block); +} + +static int usb4_switch_nvm_set_offset(struct tb_switch *sw, + unsigned int address) +{ + u32 metadata, dwaddress; + u8 status = 0; + int ret; + + dwaddress = address / 4; + metadata = (dwaddress << USB4_NVM_SET_OFFSET_SHIFT) & + USB4_NVM_SET_OFFSET_MASK; + + ret = usb4_switch_op_write_metadata(sw, metadata); + if (ret) + return ret; + + ret = usb4_switch_op(sw, USB4_SWITCH_OP_NVM_SET_OFFSET, &status); + if (ret) + return ret; + + return status ? -EIO : 0; +} + +static int usb4_switch_nvm_write_next_block(struct tb_switch *sw, + const void *buf, size_t dwords) +{ + u8 status; + int ret; + + ret = usb4_switch_op_write_data(sw, buf, dwords); + if (ret) + return ret; + + ret = usb4_switch_op(sw, USB4_SWITCH_OP_NVM_WRITE, &status); + if (ret) + return ret; + + return status ? -EIO : 0; +} + +/** + * usb4_switch_nvm_write() - Write to the router NVM + * @sw: USB4 router + * @address: Start address where to write in bytes + * @buf: Pointer to the data to write + * @size: Size of @buf in bytes + * + * Writes @buf to the router NVM using USB4 router operations. If NVM + * write is not supported returns %-EOPNOTSUPP. + */ +int usb4_switch_nvm_write(struct tb_switch *sw, unsigned int address, + const void *buf, size_t size) +{ + int ret; + + ret = usb4_switch_nvm_set_offset(sw, address); + if (ret) + return ret; + + return usb4_switch_do_write_data(sw, address, buf, size, + usb4_switch_nvm_write_next_block); +} + +/** + * usb4_switch_nvm_authenticate() - Authenticate new NVM + * @sw: USB4 router + * + * After the new NVM has been written via usb4_switch_nvm_write(), this + * function triggers NVM authentication process. If the authentication + * is successful the router is power cycled and the new NVM starts + * running. In case of failure returns negative errno. + */ +int usb4_switch_nvm_authenticate(struct tb_switch *sw) +{ + u8 status = 0; + int ret; + + ret = usb4_switch_op(sw, USB4_SWITCH_OP_NVM_AUTH, &status); + if (ret) + return ret; + + switch (status) { + case 0x0: + tb_sw_dbg(sw, "NVM authentication successful\n"); + return 0; + case 0x1: + return -EINVAL; + case 0x2: + return -EAGAIN; + case 0x3: + return -EOPNOTSUPP; + default: + return -EIO; + } +} + +/** + * usb4_switch_query_dp_resource() - Query availability of DP IN resource + * @sw: USB4 router + * @in: DP IN adapter + * + * For DP tunneling this function can be used to query availability of + * DP IN resource. Returns true if the resource is available for DP + * tunneling, false otherwise. + */ +bool usb4_switch_query_dp_resource(struct tb_switch *sw, struct tb_port *in) +{ + u8 status; + int ret; + + ret = usb4_switch_op_write_metadata(sw, in->port); + if (ret) + return false; + + ret = usb4_switch_op(sw, USB4_SWITCH_OP_QUERY_DP_RESOURCE, &status); + /* + * If DP resource allocation is not supported assume it is + * always available. + */ + if (ret == -EOPNOTSUPP) + return true; + else if (ret) + return false; + + return !status; +} + +/** + * usb4_switch_alloc_dp_resource() - Allocate DP IN resource + * @sw: USB4 router + * @in: DP IN adapter + * + * Allocates DP IN resource for DP tunneling using USB4 router + * operations. If the resource was allocated returns %0. Otherwise + * returns negative errno, in particular %-EBUSY if the resource is + * already allocated. + */ +int usb4_switch_alloc_dp_resource(struct tb_switch *sw, struct tb_port *in) +{ + u8 status; + int ret; + + ret = usb4_switch_op_write_metadata(sw, in->port); + if (ret) + return ret; + + ret = usb4_switch_op(sw, USB4_SWITCH_OP_ALLOC_DP_RESOURCE, &status); + if (ret == -EOPNOTSUPP) + return 0; + else if (ret) + return ret; + + return status ? -EBUSY : 0; +} + +/** + * usb4_switch_dealloc_dp_resource() - Releases allocated DP IN resource + * @sw: USB4 router + * @in: DP IN adapter + * + * Releases the previously allocated DP IN resource. + */ +int usb4_switch_dealloc_dp_resource(struct tb_switch *sw, struct tb_port *in) +{ + u8 status; + int ret; + + ret = usb4_switch_op_write_metadata(sw, in->port); + if (ret) + return ret; + + ret = usb4_switch_op(sw, USB4_SWITCH_OP_DEALLOC_DP_RESOURCE, &status); + if (ret == -EOPNOTSUPP) + return 0; + else if (ret) + return ret; + + return status ? -EIO : 0; +} + +static int usb4_port_idx(const struct tb_switch *sw, const struct tb_port *port) +{ + struct tb_port *p; + int usb4_idx = 0; + + /* Assume port is primary */ + tb_switch_for_each_port(sw, p) { + if (!tb_port_is_null(p)) + continue; + if (tb_is_upstream_port(p)) + continue; + if (!p->link_nr) { + if (p == port) + break; + usb4_idx++; + } + } + + return usb4_idx; +} + +/** + * usb4_switch_map_pcie_down() - Map USB4 port to a PCIe downstream adapter + * @sw: USB4 router + * @port: USB4 port + * + * USB4 routers have direct mapping between USB4 ports and PCIe + * downstream adapters where the PCIe topology is extended. This + * function returns the corresponding downstream PCIe adapter or %NULL + * if no such mapping was possible. + */ +struct tb_port *usb4_switch_map_pcie_down(struct tb_switch *sw, + const struct tb_port *port) +{ + int usb4_idx = usb4_port_idx(sw, port); + struct tb_port *p; + int pcie_idx = 0; + + /* Find PCIe down port matching usb4_port */ + tb_switch_for_each_port(sw, p) { + if (!tb_port_is_pcie_down(p)) + continue; + + if (pcie_idx == usb4_idx && !tb_pci_port_is_enabled(p)) + return p; + + pcie_idx++; + } + + return NULL; +} + +/** + * usb4_switch_map_usb3_down() - Map USB4 port to a USB3 downstream adapter + * @sw: USB4 router + * @port: USB4 port + * + * USB4 routers have direct mapping between USB4 ports and USB 3.x + * downstream adapters where the USB 3.x topology is extended. This + * function returns the corresponding downstream USB 3.x adapter or + * %NULL if no such mapping was possible. + */ +struct tb_port *usb4_switch_map_usb3_down(struct tb_switch *sw, + const struct tb_port *port) +{ + int usb4_idx = usb4_port_idx(sw, port); + struct tb_port *p; + int usb_idx = 0; + + /* Find USB3 down port matching usb4_port */ + tb_switch_for_each_port(sw, p) { + if (!tb_port_is_usb3_down(p)) + continue; + + if (usb_idx == usb4_idx && !tb_usb3_port_is_enabled(p)) + return p; + + usb_idx++; + } + + return NULL; +} + +/** + * usb4_port_unlock() - Unlock USB4 downstream port + * @port: USB4 port to unlock + * + * Unlocks USB4 downstream port so that the connection manager can + * access the router below this port. + */ +int usb4_port_unlock(struct tb_port *port) +{ + int ret; + u32 val; + + ret = tb_port_read(port, &val, TB_CFG_PORT, ADP_CS_4, 1); + if (ret) + return ret; + + val &= ~ADP_CS_4_LCK; + return tb_port_write(port, &val, TB_CFG_PORT, ADP_CS_4, 1); +} diff --git a/drivers/thunderbolt/xdomain.c b/drivers/thunderbolt/xdomain.c index 880d784398a3..053f918e00e8 100644 --- a/drivers/thunderbolt/xdomain.c +++ b/drivers/thunderbolt/xdomain.c @@ -1220,7 +1220,13 @@ struct tb_xdomain *tb_xdomain_alloc(struct tb *tb, struct device *parent, u64 route, const uuid_t *local_uuid, const uuid_t *remote_uuid) { + struct tb_switch *parent_sw = tb_to_switch(parent); struct tb_xdomain *xd; + struct tb_port *down; + + /* Make sure the downstream domain is accessible */ + down = tb_port_at(route, parent_sw); + tb_port_unlock(down); xd = kzalloc(sizeof(*xd), GFP_KERNEL); if (!xd) diff --git a/drivers/usb/cdns3/Kconfig b/drivers/usb/cdns3/Kconfig index 2a1e89d12ed9..84716d216ae5 100644 --- a/drivers/usb/cdns3/Kconfig +++ b/drivers/usb/cdns3/Kconfig @@ -53,4 +53,14 @@ config USB_CDNS3_TI e.g. J721e. +config USB_CDNS3_IMX + tristate "Cadence USB3 support on NXP i.MX platforms" + depends on ARCH_MXC || COMPILE_TEST + default USB_CDNS3 + help + Say 'Y' or 'M' here if you are building for NXP i.MX + platforms that contain Cadence USB3 controller core. + + For example, imx8qm and imx8qxp. + endif diff --git a/drivers/usb/cdns3/Makefile b/drivers/usb/cdns3/Makefile index 948e6b88d1a9..d47e341a6f39 100644 --- a/drivers/usb/cdns3/Makefile +++ b/drivers/usb/cdns3/Makefile @@ -15,3 +15,4 @@ cdns3-$(CONFIG_USB_CDNS3_HOST) += host.o obj-$(CONFIG_USB_CDNS3_PCI_WRAP) += cdns3-pci-wrap.o obj-$(CONFIG_USB_CDNS3_TI) += cdns3-ti.o +obj-$(CONFIG_USB_CDNS3_IMX) += cdns3-imx.o diff --git a/drivers/usb/cdns3/cdns3-imx.c b/drivers/usb/cdns3/cdns3-imx.c new file mode 100644 index 000000000000..aba988e71958 --- /dev/null +++ b/drivers/usb/cdns3/cdns3-imx.c @@ -0,0 +1,216 @@ +// SPDX-License-Identifier: GPL-2.0 +/** + * cdns3-imx.c - NXP i.MX specific Glue layer for Cadence USB Controller + * + * Copyright (C) 2019 NXP + */ + +#include <linux/bits.h> +#include <linux/clk.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/io.h> +#include <linux/of_platform.h> +#include <linux/iopoll.h> + +#define USB3_CORE_CTRL1 0x00 +#define USB3_CORE_CTRL2 0x04 +#define USB3_INT_REG 0x08 +#define USB3_CORE_STATUS 0x0c +#define XHCI_DEBUG_LINK_ST 0x10 +#define XHCI_DEBUG_BUS 0x14 +#define USB3_SSPHY_CTRL1 0x40 +#define USB3_SSPHY_CTRL2 0x44 +#define USB3_SSPHY_STATUS 0x4c +#define USB2_PHY_CTRL1 0x50 +#define USB2_PHY_CTRL2 0x54 +#define USB2_PHY_STATUS 0x5c + +/* Register bits definition */ + +/* USB3_CORE_CTRL1 */ +#define SW_RESET_MASK (0x3f << 26) +#define PWR_SW_RESET BIT(31) +#define APB_SW_RESET BIT(30) +#define AXI_SW_RESET BIT(29) +#define RW_SW_RESET BIT(28) +#define PHY_SW_RESET BIT(27) +#define PHYAHB_SW_RESET BIT(26) +#define ALL_SW_RESET (PWR_SW_RESET | APB_SW_RESET | AXI_SW_RESET | \ + RW_SW_RESET | PHY_SW_RESET | PHYAHB_SW_RESET) +#define OC_DISABLE BIT(9) +#define MDCTRL_CLK_SEL BIT(7) +#define MODE_STRAP_MASK (0x7) +#define DEV_MODE (1 << 2) +#define HOST_MODE (1 << 1) +#define OTG_MODE (1 << 0) + +/* USB3_INT_REG */ +#define CLK_125_REQ BIT(29) +#define LPM_CLK_REQ BIT(28) +#define DEVU3_WAEKUP_EN BIT(14) +#define OTG_WAKEUP_EN BIT(12) +#define DEV_INT_EN (3 << 8) /* DEV INT b9:8 */ +#define HOST_INT1_EN (1 << 0) /* HOST INT b7:0 */ + +/* USB3_CORE_STATUS */ +#define MDCTRL_CLK_STATUS BIT(15) +#define DEV_POWER_ON_READY BIT(13) +#define HOST_POWER_ON_READY BIT(12) + +/* USB3_SSPHY_STATUS */ +#define CLK_VALID_MASK (0x3f << 26) +#define CLK_VALID_COMPARE_BITS (0xf << 28) +#define PHY_REFCLK_REQ (1 << 0) + +struct cdns_imx { + struct device *dev; + void __iomem *noncore; + struct clk_bulk_data *clks; + int num_clks; +}; + +static inline u32 cdns_imx_readl(struct cdns_imx *data, u32 offset) +{ + return readl(data->noncore + offset); +} + +static inline void cdns_imx_writel(struct cdns_imx *data, u32 offset, u32 value) +{ + writel(value, data->noncore + offset); +} + +static const struct clk_bulk_data imx_cdns3_core_clks[] = { + { .id = "usb3_lpm_clk" }, + { .id = "usb3_bus_clk" }, + { .id = "usb3_aclk" }, + { .id = "usb3_ipg_clk" }, + { .id = "usb3_core_pclk" }, +}; + +static int cdns_imx_noncore_init(struct cdns_imx *data) +{ + u32 value; + int ret; + struct device *dev = data->dev; + + cdns_imx_writel(data, USB3_SSPHY_STATUS, CLK_VALID_MASK); + udelay(1); + ret = readl_poll_timeout(data->noncore + USB3_SSPHY_STATUS, value, + (value & CLK_VALID_COMPARE_BITS) == CLK_VALID_COMPARE_BITS, + 10, 100000); + if (ret) { + dev_err(dev, "wait clkvld timeout\n"); + return ret; + } + + value = cdns_imx_readl(data, USB3_CORE_CTRL1); + value |= ALL_SW_RESET; + cdns_imx_writel(data, USB3_CORE_CTRL1, value); + udelay(1); + + value = cdns_imx_readl(data, USB3_CORE_CTRL1); + value = (value & ~MODE_STRAP_MASK) | OTG_MODE | OC_DISABLE; + cdns_imx_writel(data, USB3_CORE_CTRL1, value); + + value = cdns_imx_readl(data, USB3_INT_REG); + value |= HOST_INT1_EN | DEV_INT_EN; + cdns_imx_writel(data, USB3_INT_REG, value); + + value = cdns_imx_readl(data, USB3_CORE_CTRL1); + value &= ~ALL_SW_RESET; + cdns_imx_writel(data, USB3_CORE_CTRL1, value); + return ret; +} + +static int cdns_imx_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *node = dev->of_node; + struct cdns_imx *data; + int ret; + + if (!node) + return -ENODEV; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + platform_set_drvdata(pdev, data); + data->dev = dev; + data->noncore = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(data->noncore)) { + dev_err(dev, "can't map IOMEM resource\n"); + return PTR_ERR(data->noncore); + } + + data->num_clks = ARRAY_SIZE(imx_cdns3_core_clks); + data->clks = (struct clk_bulk_data *)imx_cdns3_core_clks; + ret = devm_clk_bulk_get(dev, data->num_clks, data->clks); + if (ret) + return ret; + + ret = clk_bulk_prepare_enable(data->num_clks, data->clks); + if (ret) + return ret; + + ret = cdns_imx_noncore_init(data); + if (ret) + goto err; + + ret = of_platform_populate(node, NULL, NULL, dev); + if (ret) { + dev_err(dev, "failed to create children: %d\n", ret); + goto err; + } + + return ret; + +err: + clk_bulk_disable_unprepare(data->num_clks, data->clks); + return ret; +} + +static int cdns_imx_remove_core(struct device *dev, void *data) +{ + struct platform_device *pdev = to_platform_device(dev); + + platform_device_unregister(pdev); + + return 0; +} + +static int cdns_imx_remove(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + + device_for_each_child(dev, NULL, cdns_imx_remove_core); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static const struct of_device_id cdns_imx_of_match[] = { + { .compatible = "fsl,imx8qm-usb3", }, + {}, +}; +MODULE_DEVICE_TABLE(of, cdns_imx_of_match); + +static struct platform_driver cdns_imx_driver = { + .probe = cdns_imx_probe, + .remove = cdns_imx_remove, + .driver = { + .name = "cdns3-imx", + .of_match_table = cdns_imx_of_match, + }, +}; +module_platform_driver(cdns_imx_driver); + +MODULE_ALIAS("platform:cdns3-imx"); +MODULE_AUTHOR("Peter Chen <peter.chen@nxp.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Cadence USB3 i.MX Glue Layer"); diff --git a/drivers/usb/cdns3/debug.h b/drivers/usb/cdns3/debug.h index 2c9afbfe988b..a5c6a29e1340 100644 --- a/drivers/usb/cdns3/debug.h +++ b/drivers/usb/cdns3/debug.h @@ -140,7 +140,7 @@ static inline char *cdns3_dbg_ring(struct cdns3_endpoint *priv_ep, trb_per_sector = TRBS_PER_SEGMENT; if (trb_per_sector > TRBS_PER_SEGMENT) { - sprintf(str + ret, "\t\tTo big transfer ring %d\n", + sprintf(str + ret, "\t\tTransfer ring %d too big\n", trb_per_sector); return str; } diff --git a/drivers/usb/cdns3/gadget.c b/drivers/usb/cdns3/gadget.c index 02f6ca2cb1ba..736b0c6e27fe 100644 --- a/drivers/usb/cdns3/gadget.c +++ b/drivers/usb/cdns3/gadget.c @@ -71,6 +71,23 @@ static int __cdns3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request, gfp_t gfp_flags); +static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep, + struct usb_request *request); + +static int cdns3_ep_run_stream_transfer(struct cdns3_endpoint *priv_ep, + struct usb_request *request); + +/** + * cdns3_clear_register_bit - clear bit in given register. + * @ptr: address of device controller register to be read and changed + * @mask: bits requested to clar + */ +void cdns3_clear_register_bit(void __iomem *ptr, u32 mask) +{ + mask = readl(ptr) & ~mask; + writel(mask, ptr); +} + /** * cdns3_set_register_bit - set bit in given register. * @ptr: address of device controller register to be read and changed @@ -150,6 +167,21 @@ void cdns3_select_ep(struct cdns3_device *priv_dev, u32 ep) writel(ep, &priv_dev->regs->ep_sel); } +/** + * cdns3_get_tdl - gets current tdl for selected endpoint. + * @priv_dev: extended gadget object + * + * Before calling this function the appropriate endpoint must + * be selected by means of cdns3_select_ep function. + */ +static int cdns3_get_tdl(struct cdns3_device *priv_dev) +{ + if (priv_dev->dev_ver < DEV_VER_V3) + return EP_CMD_TDL_GET(readl(&priv_dev->regs->ep_cmd)); + else + return readl(&priv_dev->regs->ep_tdl); +} + dma_addr_t cdns3_trb_virt_to_dma(struct cdns3_endpoint *priv_ep, struct cdns3_trb *trb) { @@ -166,7 +198,22 @@ int cdns3_ring_size(struct cdns3_endpoint *priv_ep) case USB_ENDPOINT_XFER_CONTROL: return TRB_CTRL_RING_SIZE; default: - return TRB_RING_SIZE; + if (priv_ep->use_streams) + return TRB_STREAM_RING_SIZE; + else + return TRB_RING_SIZE; + } +} + +static void cdns3_free_trb_pool(struct cdns3_endpoint *priv_ep) +{ + struct cdns3_device *priv_dev = priv_ep->cdns3_dev; + + if (priv_ep->trb_pool) { + dma_free_coherent(priv_dev->sysdev, + cdns3_ring_size(priv_ep), + priv_ep->trb_pool, priv_ep->trb_pool_dma); + priv_ep->trb_pool = NULL; } } @@ -180,8 +227,12 @@ int cdns3_allocate_trb_pool(struct cdns3_endpoint *priv_ep) { struct cdns3_device *priv_dev = priv_ep->cdns3_dev; int ring_size = cdns3_ring_size(priv_ep); + int num_trbs = ring_size / TRB_SIZE; struct cdns3_trb *link_trb; + if (priv_ep->trb_pool && priv_ep->alloc_ring_size < ring_size) + cdns3_free_trb_pool(priv_ep); + if (!priv_ep->trb_pool) { priv_ep->trb_pool = dma_alloc_coherent(priv_dev->sysdev, ring_size, @@ -189,32 +240,30 @@ int cdns3_allocate_trb_pool(struct cdns3_endpoint *priv_ep) GFP_DMA32 | GFP_ATOMIC); if (!priv_ep->trb_pool) return -ENOMEM; - } else { + + priv_ep->alloc_ring_size = ring_size; memset(priv_ep->trb_pool, 0, ring_size); } + priv_ep->num_trbs = num_trbs; + if (!priv_ep->num) return 0; - priv_ep->num_trbs = ring_size / TRB_SIZE; - /* Initialize the last TRB as Link TRB. */ + /* Initialize the last TRB as Link TRB */ link_trb = (priv_ep->trb_pool + (priv_ep->num_trbs - 1)); - link_trb->buffer = TRB_BUFFER(priv_ep->trb_pool_dma); - link_trb->control = TRB_CYCLE | TRB_TYPE(TRB_LINK) | TRB_TOGGLE; - - return 0; -} -static void cdns3_free_trb_pool(struct cdns3_endpoint *priv_ep) -{ - struct cdns3_device *priv_dev = priv_ep->cdns3_dev; - - if (priv_ep->trb_pool) { - dma_free_coherent(priv_dev->sysdev, - cdns3_ring_size(priv_ep), - priv_ep->trb_pool, priv_ep->trb_pool_dma); - priv_ep->trb_pool = NULL; + if (priv_ep->use_streams) { + /* + * For stream capable endpoints driver use single correct TRB. + * The last trb has zeroed cycle bit + */ + link_trb->control = 0; + } else { + link_trb->buffer = TRB_BUFFER(priv_ep->trb_pool_dma); + link_trb->control = TRB_CYCLE | TRB_TYPE(TRB_LINK) | TRB_TOGGLE; } + return 0; } /** @@ -253,6 +302,7 @@ void cdns3_hw_reset_eps_config(struct cdns3_device *priv_dev) priv_dev->onchip_used_size = 0; priv_dev->out_mem_is_allocated = 0; priv_dev->wait_for_setup = 0; + priv_dev->using_streams = 0; } /** @@ -356,17 +406,43 @@ static int cdns3_start_all_request(struct cdns3_device *priv_dev, { struct usb_request *request; int ret = 0; + u8 pending_empty = list_empty(&priv_ep->pending_req_list); + + /* + * If the last pending transfer is INTERNAL + * OR streams are enabled for this endpoint + * do NOT start new transfer till the last one is pending + */ + if (!pending_empty) { + struct cdns3_request *priv_req; + + request = cdns3_next_request(&priv_ep->pending_req_list); + priv_req = to_cdns3_request(request); + if ((priv_req->flags & REQUEST_INTERNAL) || + (priv_ep->flags & EP_TDLCHK_EN) || + priv_ep->use_streams) { + trace_printk("Blocking external request\n"); + return ret; + } + } while (!list_empty(&priv_ep->deferred_req_list)) { request = cdns3_next_request(&priv_ep->deferred_req_list); - ret = cdns3_ep_run_transfer(priv_ep, request); + if (!priv_ep->use_streams) { + ret = cdns3_ep_run_transfer(priv_ep, request); + } else { + priv_ep->stream_sg_idx = 0; + ret = cdns3_ep_run_stream_transfer(priv_ep, request); + } if (ret) return ret; list_del(&request->list); list_add_tail(&request->list, &priv_ep->pending_req_list); + if (request->stream_id != 0 || (priv_ep->flags & EP_TDLCHK_EN)) + break; } priv_ep->flags &= ~EP_RING_FULL; @@ -379,7 +455,7 @@ static int cdns3_start_all_request(struct cdns3_device *priv_dev, * buffer for unblocking on-chip FIFO buffer. This flag will be cleared * if before first DESCMISS interrupt the DMA will be armed. */ -#define cdns3_wa2_enable_detection(priv_dev, ep_priv, reg) do { \ +#define cdns3_wa2_enable_detection(priv_dev, priv_ep, reg) do { \ if (!priv_ep->dir && priv_ep->type != USB_ENDPOINT_XFER_ISOC) { \ priv_ep->flags |= EP_QUIRK_EXTRA_BUF_DET; \ (reg) |= EP_STS_EN_DESCMISEN; \ @@ -450,10 +526,17 @@ struct usb_request *cdns3_wa2_gadget_giveback(struct cdns3_device *priv_dev, if (!req) return NULL; + /* unmap the gadget request before copying data */ + usb_gadget_unmap_request_by_dev(priv_dev->sysdev, req, + priv_ep->dir); + cdns3_wa2_descmiss_copy_data(priv_ep, req); if (!(priv_ep->flags & EP_QUIRK_END_TRANSFER) && req->length != req->actual) { /* wait for next part of transfer */ + /* re-map the gadget request buffer*/ + usb_gadget_map_request_by_dev(priv_dev->sysdev, req, + usb_endpoint_dir_in(priv_ep->endpoint.desc)); return NULL; } @@ -570,6 +653,13 @@ static void cdns3_wa2_descmissing_packet(struct cdns3_endpoint *priv_ep) { struct cdns3_request *priv_req; struct usb_request *request; + u8 pending_empty = list_empty(&priv_ep->pending_req_list); + + /* check for pending transfer */ + if (!pending_empty) { + trace_cdns3_wa2(priv_ep, "Ignoring Descriptor missing IRQ\n"); + return; + } if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_DET) { priv_ep->flags &= ~EP_QUIRK_EXTRA_BUF_DET; @@ -578,8 +668,10 @@ static void cdns3_wa2_descmissing_packet(struct cdns3_endpoint *priv_ep) trace_cdns3_wa2(priv_ep, "Description Missing detected\n"); - if (priv_ep->wa2_counter >= CDNS3_WA2_NUM_BUFFERS) + if (priv_ep->wa2_counter >= CDNS3_WA2_NUM_BUFFERS) { + trace_cdns3_wa2(priv_ep, "WA2 overflow\n"); cdns3_wa2_remove_old_request(priv_ep); + } request = cdns3_gadget_ep_alloc_request(&priv_ep->endpoint, GFP_ATOMIC); @@ -621,6 +713,78 @@ err: "Failed: No sufficient memory for DESCMIS\n"); } +static void cdns3_wa2_reset_tdl(struct cdns3_device *priv_dev) +{ + u16 tdl = EP_CMD_TDL_GET(readl(&priv_dev->regs->ep_cmd)); + + if (tdl) { + u16 reset_val = EP_CMD_TDL_MAX + 1 - tdl; + + writel(EP_CMD_TDL_SET(reset_val) | EP_CMD_STDL, + &priv_dev->regs->ep_cmd); + } +} + +static void cdns3_wa2_check_outq_status(struct cdns3_device *priv_dev) +{ + u32 ep_sts_reg; + + /* select EP0-out */ + cdns3_select_ep(priv_dev, 0); + + ep_sts_reg = readl(&priv_dev->regs->ep_sts); + + if (EP_STS_OUTQ_VAL(ep_sts_reg)) { + u32 outq_ep_num = EP_STS_OUTQ_NO(ep_sts_reg); + struct cdns3_endpoint *outq_ep = priv_dev->eps[outq_ep_num]; + + if ((outq_ep->flags & EP_ENABLED) && !(outq_ep->use_streams) && + outq_ep->type != USB_ENDPOINT_XFER_ISOC && outq_ep_num) { + u8 pending_empty = list_empty(&outq_ep->pending_req_list); + + if ((outq_ep->flags & EP_QUIRK_EXTRA_BUF_DET) || + (outq_ep->flags & EP_QUIRK_EXTRA_BUF_EN) || + !pending_empty) { + } else { + u32 ep_sts_en_reg; + u32 ep_cmd_reg; + + cdns3_select_ep(priv_dev, outq_ep->num | + outq_ep->dir); + ep_sts_en_reg = readl(&priv_dev->regs->ep_sts_en); + ep_cmd_reg = readl(&priv_dev->regs->ep_cmd); + + outq_ep->flags |= EP_TDLCHK_EN; + cdns3_set_register_bit(&priv_dev->regs->ep_cfg, + EP_CFG_TDL_CHK); + + cdns3_wa2_enable_detection(priv_dev, outq_ep, + ep_sts_en_reg); + writel(ep_sts_en_reg, + &priv_dev->regs->ep_sts_en); + /* reset tdl value to zero */ + cdns3_wa2_reset_tdl(priv_dev); + /* + * Memory barrier - Reset tdl before ringing the + * doorbell. + */ + wmb(); + if (EP_CMD_DRDY & ep_cmd_reg) { + trace_cdns3_wa2(outq_ep, "Enabling WA2 skipping doorbell\n"); + + } else { + trace_cdns3_wa2(outq_ep, "Enabling WA2 ringing doorbell\n"); + /* + * ring doorbell to generate DESCMIS irq + */ + writel(EP_CMD_DRDY, + &priv_dev->regs->ep_cmd); + } + } + } + } +} + /** * cdns3_gadget_giveback - call struct usb_request's ->complete callback * @priv_ep: The endpoint to whom the request belongs to @@ -807,14 +971,120 @@ static void cdns3_wa1_tray_restore_cycle_bit(struct cdns3_device *priv_dev, cdns3_wa1_restore_cycle_bit(priv_ep); } +static int cdns3_ep_run_stream_transfer(struct cdns3_endpoint *priv_ep, + struct usb_request *request) +{ + struct cdns3_device *priv_dev = priv_ep->cdns3_dev; + struct cdns3_request *priv_req; + struct cdns3_trb *trb; + dma_addr_t trb_dma; + int address; + u32 control; + u32 length; + u32 tdl; + unsigned int sg_idx = priv_ep->stream_sg_idx; + + priv_req = to_cdns3_request(request); + address = priv_ep->endpoint.desc->bEndpointAddress; + + priv_ep->flags |= EP_PENDING_REQUEST; + + /* must allocate buffer aligned to 8 */ + if (priv_req->flags & REQUEST_UNALIGNED) + trb_dma = priv_req->aligned_buf->dma; + else + trb_dma = request->dma; + + /* For stream capable endpoints driver use only single TD. */ + trb = priv_ep->trb_pool + priv_ep->enqueue; + priv_req->start_trb = priv_ep->enqueue; + priv_req->end_trb = priv_req->start_trb; + priv_req->trb = trb; + + cdns3_select_ep(priv_ep->cdns3_dev, address); + + control = TRB_TYPE(TRB_NORMAL) | TRB_CYCLE | + TRB_STREAM_ID(priv_req->request.stream_id) | TRB_ISP; + + if (!request->num_sgs) { + trb->buffer = TRB_BUFFER(trb_dma); + length = request->length; + } else { + trb->buffer = TRB_BUFFER(request->sg[sg_idx].dma_address); + length = request->sg[sg_idx].length; + } + + tdl = DIV_ROUND_UP(length, priv_ep->endpoint.maxpacket); + + trb->length = TRB_BURST_LEN(16 /*priv_ep->trb_burst_size*/) | + TRB_LEN(length); + + /* + * For DEV_VER_V2 controller version we have enabled + * USB_CONF2_EN_TDL_TRB in DMULT configuration. + * This enables TDL calculation based on TRB, hence setting TDL in TRB. + */ + if (priv_dev->dev_ver >= DEV_VER_V2) { + if (priv_dev->gadget.speed == USB_SPEED_SUPER) + trb->length |= TRB_TDL_SS_SIZE(tdl); + } + priv_req->flags |= REQUEST_PENDING; + + trb->control = control; + + trace_cdns3_prepare_trb(priv_ep, priv_req->trb); + + /* + * Memory barrier - Cycle Bit must be set before trb->length and + * trb->buffer fields. + */ + wmb(); + + /* always first element */ + writel(EP_TRADDR_TRADDR(priv_ep->trb_pool_dma), + &priv_dev->regs->ep_traddr); + + if (!(priv_ep->flags & EP_STALLED)) { + trace_cdns3_ring(priv_ep); + /*clearing TRBERR and EP_STS_DESCMIS before seting DRDY*/ + writel(EP_STS_TRBERR | EP_STS_DESCMIS, &priv_dev->regs->ep_sts); + + priv_ep->prime_flag = false; + + /* + * Controller version DEV_VER_V2 tdl calculation + * is based on TRB + */ + + if (priv_dev->dev_ver < DEV_VER_V2) + writel(EP_CMD_TDL_SET(tdl) | EP_CMD_STDL, + &priv_dev->regs->ep_cmd); + else if (priv_dev->dev_ver > DEV_VER_V2) + writel(tdl, &priv_dev->regs->ep_tdl); + + priv_ep->last_stream_id = priv_req->request.stream_id; + writel(EP_CMD_DRDY, &priv_dev->regs->ep_cmd); + writel(EP_CMD_ERDY_SID(priv_req->request.stream_id) | + EP_CMD_ERDY, &priv_dev->regs->ep_cmd); + + trace_cdns3_doorbell_epx(priv_ep->name, + readl(&priv_dev->regs->ep_traddr)); + } + + /* WORKAROUND for transition to L0 */ + __cdns3_gadget_wakeup(priv_dev); + + return 0; +} + /** * cdns3_ep_run_transfer - start transfer on no-default endpoint hardware * @priv_ep: endpoint object * * Returns zero on success or negative value on failure */ -int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep, - struct usb_request *request) +static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep, + struct usb_request *request) { struct cdns3_device *priv_dev = priv_ep->cdns3_dev; struct cdns3_request *priv_req; @@ -826,6 +1096,7 @@ int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep, int address; u32 control; int pcs; + u16 total_tdl = 0; if (priv_ep->type == USB_ENDPOINT_XFER_ISOC) num_trb = priv_ep->interval; @@ -910,6 +1181,9 @@ int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep, if (likely(priv_dev->dev_ver >= DEV_VER_V2)) td_size = DIV_ROUND_UP(length, priv_ep->endpoint.maxpacket); + else if (priv_ep->flags & EP_TDLCHK_EN) + total_tdl += DIV_ROUND_UP(length, + priv_ep->endpoint.maxpacket); trb->length = TRB_BURST_LEN(priv_ep->trb_burst_size) | TRB_LEN(length); @@ -954,6 +1228,23 @@ int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep, if (sg_iter == 1) trb->control |= TRB_IOC | TRB_ISP; + if (priv_dev->dev_ver < DEV_VER_V2 && + (priv_ep->flags & EP_TDLCHK_EN)) { + u16 tdl = total_tdl; + u16 old_tdl = EP_CMD_TDL_GET(readl(&priv_dev->regs->ep_cmd)); + + if (tdl > EP_CMD_TDL_MAX) { + tdl = EP_CMD_TDL_MAX; + priv_ep->pending_tdl = total_tdl - EP_CMD_TDL_MAX; + } + + if (old_tdl < tdl) { + tdl -= old_tdl; + writel(EP_CMD_TDL_SET(tdl) | EP_CMD_STDL, + &priv_dev->regs->ep_cmd); + } + } + /* * Memory barrier - cycle bit must be set before other filds in trb. */ @@ -1153,29 +1444,56 @@ static void cdns3_transfer_completed(struct cdns3_device *priv_dev, cdns3_move_deq_to_next_trb(priv_req); } - /* Re-select endpoint. It could be changed by other CPU during - * handling usb_gadget_giveback_request. - */ - cdns3_select_ep(priv_dev, priv_ep->endpoint.address); + if (!request->stream_id) { + /* Re-select endpoint. It could be changed by other CPU + * during handling usb_gadget_giveback_request. + */ + cdns3_select_ep(priv_dev, priv_ep->endpoint.address); - if (!cdns3_request_handled(priv_ep, priv_req)) - goto prepare_next_td; + if (!cdns3_request_handled(priv_ep, priv_req)) + goto prepare_next_td; - trb = priv_ep->trb_pool + priv_ep->dequeue; - trace_cdns3_complete_trb(priv_ep, trb); + trb = priv_ep->trb_pool + priv_ep->dequeue; + trace_cdns3_complete_trb(priv_ep, trb); + + if (trb != priv_req->trb) + dev_warn(priv_dev->dev, + "request_trb=0x%p, queue_trb=0x%p\n", + priv_req->trb, trb); + + request->actual = TRB_LEN(le32_to_cpu(trb->length)); + cdns3_move_deq_to_next_trb(priv_req); + cdns3_gadget_giveback(priv_ep, priv_req, 0); + + if (priv_ep->type != USB_ENDPOINT_XFER_ISOC && + TRBS_PER_SEGMENT == 2) + break; + } else { + /* Re-select endpoint. It could be changed by other CPU + * during handling usb_gadget_giveback_request. + */ + cdns3_select_ep(priv_dev, priv_ep->endpoint.address); + + trb = priv_ep->trb_pool; + trace_cdns3_complete_trb(priv_ep, trb); - if (trb != priv_req->trb) - dev_warn(priv_dev->dev, - "request_trb=0x%p, queue_trb=0x%p\n", - priv_req->trb, trb); + if (trb != priv_req->trb) + dev_warn(priv_dev->dev, + "request_trb=0x%p, queue_trb=0x%p\n", + priv_req->trb, trb); - request->actual = TRB_LEN(le32_to_cpu(trb->length)); - cdns3_move_deq_to_next_trb(priv_req); - cdns3_gadget_giveback(priv_ep, priv_req, 0); + request->actual += TRB_LEN(le32_to_cpu(trb->length)); - if (priv_ep->type != USB_ENDPOINT_XFER_ISOC && - TRBS_PER_SEGMENT == 2) + if (!request->num_sgs || + (request->num_sgs == (priv_ep->stream_sg_idx + 1))) { + priv_ep->stream_sg_idx = 0; + cdns3_gadget_giveback(priv_ep, priv_req, 0); + } else { + priv_ep->stream_sg_idx++; + cdns3_ep_run_stream_transfer(priv_ep, request); + } break; + } } priv_ep->flags &= ~EP_PENDING_REQUEST; @@ -1205,6 +1523,21 @@ void cdns3_rearm_transfer(struct cdns3_endpoint *priv_ep, u8 rearm) } } +static void cdns3_reprogram_tdl(struct cdns3_endpoint *priv_ep) +{ + u16 tdl = priv_ep->pending_tdl; + struct cdns3_device *priv_dev = priv_ep->cdns3_dev; + + if (tdl > EP_CMD_TDL_MAX) { + tdl = EP_CMD_TDL_MAX; + priv_ep->pending_tdl -= EP_CMD_TDL_MAX; + } else { + priv_ep->pending_tdl = 0; + } + + writel(EP_CMD_TDL_SET(tdl) | EP_CMD_STDL, &priv_dev->regs->ep_cmd); +} + /** * cdns3_check_ep_interrupt_proceed - Processes interrupt related to endpoint * @priv_ep: endpoint object @@ -1215,6 +1548,9 @@ static int cdns3_check_ep_interrupt_proceed(struct cdns3_endpoint *priv_ep) { struct cdns3_device *priv_dev = priv_ep->cdns3_dev; u32 ep_sts_reg; + struct usb_request *deferred_request; + struct usb_request *pending_request; + u32 tdl = 0; cdns3_select_ep(priv_dev, priv_ep->endpoint.address); @@ -1223,6 +1559,36 @@ static int cdns3_check_ep_interrupt_proceed(struct cdns3_endpoint *priv_ep) ep_sts_reg = readl(&priv_dev->regs->ep_sts); writel(ep_sts_reg, &priv_dev->regs->ep_sts); + if ((ep_sts_reg & EP_STS_PRIME) && priv_ep->use_streams) { + bool dbusy = !!(ep_sts_reg & EP_STS_DBUSY); + + tdl = cdns3_get_tdl(priv_dev); + + /* + * Continue the previous transfer: + * There is some racing between ERDY and PRIME. The device send + * ERDY and almost in the same time Host send PRIME. It cause + * that host ignore the ERDY packet and driver has to send it + * again. + */ + if (tdl && (dbusy | !EP_STS_BUFFEMPTY(ep_sts_reg) | + EP_STS_HOSTPP(ep_sts_reg))) { + writel(EP_CMD_ERDY | + EP_CMD_ERDY_SID(priv_ep->last_stream_id), + &priv_dev->regs->ep_cmd); + ep_sts_reg &= ~(EP_STS_MD_EXIT | EP_STS_IOC); + } else { + priv_ep->prime_flag = true; + + pending_request = cdns3_next_request(&priv_ep->pending_req_list); + deferred_request = cdns3_next_request(&priv_ep->deferred_req_list); + + if (deferred_request && !pending_request) { + cdns3_start_all_request(priv_dev, priv_ep); + } + } + } + if (ep_sts_reg & EP_STS_TRBERR) { if (priv_ep->flags & EP_STALL_PENDING && !(ep_sts_reg & EP_STS_DESCMIS && @@ -1259,7 +1625,8 @@ static int cdns3_check_ep_interrupt_proceed(struct cdns3_endpoint *priv_ep) } } - if ((ep_sts_reg & EP_STS_IOC) || (ep_sts_reg & EP_STS_ISP)) { + if ((ep_sts_reg & EP_STS_IOC) || (ep_sts_reg & EP_STS_ISP) || + (ep_sts_reg & EP_STS_IOT)) { if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_EN) { if (ep_sts_reg & EP_STS_ISP) priv_ep->flags |= EP_QUIRK_END_TRANSFER; @@ -1267,6 +1634,29 @@ static int cdns3_check_ep_interrupt_proceed(struct cdns3_endpoint *priv_ep) priv_ep->flags &= ~EP_QUIRK_END_TRANSFER; } + if (!priv_ep->use_streams) { + if ((ep_sts_reg & EP_STS_IOC) || + (ep_sts_reg & EP_STS_ISP)) { + cdns3_transfer_completed(priv_dev, priv_ep); + } else if ((priv_ep->flags & EP_TDLCHK_EN) & + priv_ep->pending_tdl) { + /* handle IOT with pending tdl */ + cdns3_reprogram_tdl(priv_ep); + } + } else if (priv_ep->dir == USB_DIR_OUT) { + priv_ep->ep_sts_pending |= ep_sts_reg; + } else if (ep_sts_reg & EP_STS_IOT) { + cdns3_transfer_completed(priv_dev, priv_ep); + } + } + + /* + * MD_EXIT interrupt sets when stream capable endpoint exits + * from MOVE DATA state of Bulk IN/OUT stream protocol state machine + */ + if (priv_ep->dir == USB_DIR_OUT && (ep_sts_reg & EP_STS_MD_EXIT) && + (priv_ep->ep_sts_pending & EP_STS_IOT) && priv_ep->use_streams) { + priv_ep->ep_sts_pending = 0; cdns3_transfer_completed(priv_dev, priv_ep); } @@ -1274,7 +1664,7 @@ static int cdns3_check_ep_interrupt_proceed(struct cdns3_endpoint *priv_ep) * WA2: this condition should only be meet when * priv_ep->flags & EP_QUIRK_EXTRA_BUF_DET or * priv_ep->flags & EP_QUIRK_EXTRA_BUF_EN. - * In other cases this interrupt will be disabled/ + * In other cases this interrupt will be disabled. */ if (ep_sts_reg & EP_STS_DESCMIS && priv_dev->dev_ver < DEV_VER_V2 && !(priv_ep->flags & EP_STALLED)) @@ -1457,6 +1847,9 @@ static irqreturn_t cdns3_device_thread_irq_handler(int irq, void *data) ret = IRQ_HANDLED; } + if (priv_dev->dev_ver < DEV_VER_V2 && priv_dev->using_streams) + cdns3_wa2_check_outq_status(priv_dev); + irqend: writel(~0, &priv_dev->regs->ep_ien); spin_unlock_irqrestore(&priv_dev->lock, flags); @@ -1511,6 +1904,27 @@ static int cdns3_ep_onchip_buffer_reserve(struct cdns3_device *priv_dev, return 0; } +void cdns3_stream_ep_reconfig(struct cdns3_device *priv_dev, + struct cdns3_endpoint *priv_ep) +{ + if (!priv_ep->use_streams || priv_dev->gadget.speed < USB_SPEED_SUPER) + return; + + if (priv_dev->dev_ver >= DEV_VER_V3) { + u32 mask = BIT(priv_ep->num + (priv_ep->dir ? 16 : 0)); + + /* + * Stream capable endpoints are handled by using ep_tdl + * register. Other endpoints use TDL from TRB feature. + */ + cdns3_clear_register_bit(&priv_dev->regs->tdl_from_trb, mask); + } + + /* Enable Stream Bit TDL chk and SID chk */ + cdns3_set_register_bit(&priv_dev->regs->ep_cfg, EP_CFG_STREAM_EN | + EP_CFG_TDL_CHK | EP_CFG_SID_CHK); +} + void cdns3_configure_dmult(struct cdns3_device *priv_dev, struct cdns3_endpoint *priv_ep) { @@ -1772,6 +2186,7 @@ static int cdns3_gadget_ep_enable(struct usb_ep *ep, { struct cdns3_endpoint *priv_ep; struct cdns3_device *priv_dev; + const struct usb_ss_ep_comp_descriptor *comp_desc; u32 reg = EP_STS_EN_TRBERREN; u32 bEndpointAddress; unsigned long flags; @@ -1781,6 +2196,7 @@ static int cdns3_gadget_ep_enable(struct usb_ep *ep, priv_ep = ep_to_cdns3_ep(ep); priv_dev = priv_ep->cdns3_dev; + comp_desc = priv_ep->endpoint.comp_desc; if (!ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT) { dev_dbg(priv_dev->dev, "usbss: invalid parameters\n"); @@ -1811,6 +2227,24 @@ static int cdns3_gadget_ep_enable(struct usb_ep *ep, goto exit; } + bEndpointAddress = priv_ep->num | priv_ep->dir; + cdns3_select_ep(priv_dev, bEndpointAddress); + + if (usb_ss_max_streams(comp_desc) && usb_endpoint_xfer_bulk(desc)) { + /* + * Enable stream support (SS mode) related interrupts + * in EP_STS_EN Register + */ + if (priv_dev->gadget.speed >= USB_SPEED_SUPER) { + reg |= EP_STS_EN_IOTEN | EP_STS_EN_PRIMEEEN | + EP_STS_EN_SIDERREN | EP_STS_EN_MD_EXITEN | + EP_STS_EN_STREAMREN; + priv_ep->use_streams = true; + cdns3_stream_ep_reconfig(priv_dev, priv_ep); + priv_dev->using_streams |= true; + } + } + ret = cdns3_allocate_trb_pool(priv_ep); if (ret) @@ -1957,6 +2391,7 @@ static int cdns3_gadget_ep_disable(struct usb_ep *ep) ep->desc = NULL; priv_ep->flags &= ~EP_ENABLED; + priv_ep->use_streams = false; spin_unlock_irqrestore(&priv_dev->lock, flags); @@ -2005,13 +2440,21 @@ static int __cdns3_gadget_ep_queue(struct usb_ep *ep, list_add_tail(&request->list, &priv_ep->deferred_req_list); /* + * For stream capable endpoint if prime irq flag is set then only start + * request. * If hardware endpoint configuration has not been set yet then * just queue request in deferred list. Transfer will be started in * cdns3_set_hw_configuration. */ - if (priv_dev->hw_configured_flag && !(priv_ep->flags & EP_STALLED) && - !(priv_ep->flags & EP_STALL_PENDING)) - cdns3_start_all_request(priv_dev, priv_ep); + if (!request->stream_id) { + if (priv_dev->hw_configured_flag && + !(priv_ep->flags & EP_STALLED) && + !(priv_ep->flags & EP_STALL_PENDING)) + cdns3_start_all_request(priv_dev, priv_ep); + } else { + if (priv_dev->hw_configured_flag && priv_ep->prime_flag) + cdns3_start_all_request(priv_dev, priv_ep); + } return 0; } @@ -2384,7 +2827,6 @@ static int cdns3_gadget_udc_stop(struct usb_gadget *gadget) struct cdns3_endpoint *priv_ep; u32 bEndpointAddress; struct usb_ep *ep; - int ret = 0; int val; priv_dev->gadget_driver = NULL; @@ -2408,7 +2850,7 @@ static int cdns3_gadget_udc_stop(struct usb_gadget *gadget) writel(0, &priv_dev->regs->usb_ien); writel(USB_CONF_DEVDS, &priv_dev->regs->usb_conf); - return ret; + return 0; } static const struct usb_gadget_ops cdns3_gadget_ops = { diff --git a/drivers/usb/cdns3/gadget.h b/drivers/usb/cdns3/gadget.h index bc4024041ef2..f003a7801872 100644 --- a/drivers/usb/cdns3/gadget.h +++ b/drivers/usb/cdns3/gadget.h @@ -599,6 +599,7 @@ struct cdns3_usb_regs { #define EP_CMD_TDL_MASK GENMASK(15, 9) #define EP_CMD_TDL_SET(p) (((p) << 9) & EP_CMD_TDL_MASK) #define EP_CMD_TDL_GET(p) (((p) & EP_CMD_TDL_MASK) >> 9) +#define EP_CMD_TDL_MAX (EP_CMD_TDL_MASK >> 9) /* ERDY Stream ID value (used in SS mode). */ #define EP_CMD_ERDY_SID_MASK GENMASK(31, 16) @@ -969,10 +970,18 @@ struct cdns3_usb_regs { #define ISO_MAX_INTERVAL 10 +#define MAX_TRB_LENGTH BIT(16) + #if TRBS_PER_SEGMENT < 2 #error "Incorrect TRBS_PER_SEGMENT. Minimal Transfer Ring size is 2." #endif +#define TRBS_PER_STREAM_SEGMENT 2 + +#if TRBS_PER_STREAM_SEGMENT < 2 +#error "Incorrect TRBS_PER_STREAMS_SEGMENT. Minimal Transfer Ring size is 2." +#endif + /* *Only for ISOC endpoints - maximum number of TRBs is calculated as * pow(2, bInterval-1) * number of usb requests. It is limitation made by @@ -1000,6 +1009,7 @@ struct cdns3_trb { #define TRB_SIZE (sizeof(struct cdns3_trb)) #define TRB_RING_SIZE (TRB_SIZE * TRBS_PER_SEGMENT) +#define TRB_STREAM_RING_SIZE (TRB_SIZE * TRBS_PER_STREAM_SEGMENT) #define TRB_ISO_RING_SIZE (TRB_SIZE * TRBS_PER_ISOC_SEGMENT) #define TRB_CTRL_RING_SIZE (TRB_SIZE * 2) @@ -1078,7 +1088,7 @@ struct cdns3_trb { #define CDNS3_ENDPOINTS_MAX_COUNT 32 #define CDNS3_EP_ZLP_BUF_SIZE 1024 -#define CDNS3_EP_BUF_SIZE 2 /* KB */ +#define CDNS3_EP_BUF_SIZE 4 /* KB */ #define CDNS3_EP_ISO_HS_MULT 3 #define CDNS3_EP_ISO_SS_BURST 3 #define CDNS3_MAX_NUM_DESCMISS_BUF 32 @@ -1109,6 +1119,7 @@ struct cdns3_device; * @interval: interval between packets used for ISOC endpoint. * @free_trbs: number of free TRBs in transfer ring * @num_trbs: number of all TRBs in transfer ring + * @alloc_ring_size: size of the allocated TRB ring * @pcs: producer cycle state * @ccs: consumer cycle state * @enqueue: enqueue index in transfer ring @@ -1142,6 +1153,7 @@ struct cdns3_endpoint { #define EP_QUIRK_END_TRANSFER BIT(11) #define EP_QUIRK_EXTRA_BUF_DET BIT(12) #define EP_QUIRK_EXTRA_BUF_EN BIT(13) +#define EP_TDLCHK_EN BIT(15) u32 flags; struct cdns3_request *descmis_req; @@ -1153,6 +1165,7 @@ struct cdns3_endpoint { int free_trbs; int num_trbs; + int alloc_ring_size; u8 pcs; u8 ccs; int enqueue; @@ -1163,6 +1176,14 @@ struct cdns3_endpoint { struct cdns3_trb *wa1_trb; unsigned int wa1_trb_index; unsigned int wa1_cycle_bit:1; + + /* Stream related */ + unsigned int use_streams:1; + unsigned int prime_flag:1; + u32 ep_sts_pending; + u16 last_stream_id; + u16 pending_tdl; + unsigned int stream_sg_idx; }; /** @@ -1290,6 +1311,7 @@ struct cdns3_device { int hw_configured_flag:1; int wake_up_flag:1; unsigned status_completion_no_call:1; + unsigned using_streams:1; int out_mem_is_allocated; struct work_struct pending_status_wq; @@ -1310,8 +1332,6 @@ void cdns3_set_hw_configuration(struct cdns3_device *priv_dev); void cdns3_select_ep(struct cdns3_device *priv_dev, u32 ep); void cdns3_allow_enable_l1(struct cdns3_device *priv_dev, int enable); struct usb_request *cdns3_next_request(struct list_head *list); -int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep, - struct usb_request *request); void cdns3_rearm_transfer(struct cdns3_endpoint *priv_ep, u8 rearm); int cdns3_allocate_trb_pool(struct cdns3_endpoint *priv_ep); u8 cdns3_ep_addr_to_index(u8 ep_addr); diff --git a/drivers/usb/cdns3/trace.h b/drivers/usb/cdns3/trace.h index e92348c9b4d7..8d121e207fd8 100644 --- a/drivers/usb/cdns3/trace.h +++ b/drivers/usb/cdns3/trace.h @@ -122,18 +122,24 @@ DECLARE_EVENT_CLASS(cdns3_log_epx_irq, __string(ep_name, priv_ep->name) __field(u32, ep_sts) __field(u32, ep_traddr) + __field(u32, ep_last_sid) + __field(u32, use_streams) __dynamic_array(char, str, CDNS3_MSG_MAX) ), TP_fast_assign( __assign_str(ep_name, priv_ep->name); __entry->ep_sts = readl(&priv_dev->regs->ep_sts); __entry->ep_traddr = readl(&priv_dev->regs->ep_traddr); + __entry->ep_last_sid = priv_ep->last_stream_id; + __entry->use_streams = priv_ep->use_streams; ), - TP_printk("%s, ep_traddr: %08x", + TP_printk("%s, ep_traddr: %08x ep_last_sid: %08x use_streams: %d", cdns3_decode_epx_irq(__get_str(str), __get_str(ep_name), __entry->ep_sts), - __entry->ep_traddr) + __entry->ep_traddr, + __entry->ep_last_sid, + __entry->use_streams) ); DEFINE_EVENT(cdns3_log_epx_irq, cdns3_epx_irq, @@ -210,6 +216,7 @@ DECLARE_EVENT_CLASS(cdns3_log_request, __field(int, end_trb) __field(struct cdns3_trb *, start_trb_addr) __field(int, flags) + __field(unsigned int, stream_id) ), TP_fast_assign( __assign_str(name, req->priv_ep->name); @@ -225,9 +232,10 @@ DECLARE_EVENT_CLASS(cdns3_log_request, __entry->end_trb = req->end_trb; __entry->start_trb_addr = req->trb; __entry->flags = req->flags; + __entry->stream_id = req->request.stream_id; ), TP_printk("%s: req: %p, req buff %p, length: %u/%u %s%s%s, status: %d," - " trb: [start:%d, end:%d: virt addr %pa], flags:%x ", + " trb: [start:%d, end:%d: virt addr %pa], flags:%x SID: %u", __get_str(name), __entry->req, __entry->buf, __entry->actual, __entry->length, __entry->zero ? "Z" : "z", @@ -237,7 +245,8 @@ DECLARE_EVENT_CLASS(cdns3_log_request, __entry->start_trb, __entry->end_trb, __entry->start_trb_addr, - __entry->flags + __entry->flags, + __entry->stream_id ) ); @@ -281,6 +290,39 @@ TRACE_EVENT(cdns3_ep0_queue, __entry->length) ); +DECLARE_EVENT_CLASS(cdns3_stream_split_transfer_len, + TP_PROTO(struct cdns3_request *req), + TP_ARGS(req), + TP_STRUCT__entry( + __string(name, req->priv_ep->name) + __field(struct cdns3_request *, req) + __field(unsigned int, length) + __field(unsigned int, actual) + __field(unsigned int, stream_id) + ), + TP_fast_assign( + __assign_str(name, req->priv_ep->name); + __entry->req = req; + __entry->actual = req->request.length; + __entry->length = req->request.actual; + __entry->stream_id = req->request.stream_id; + ), + TP_printk("%s: req: %p,request length: %u actual length: %u SID: %u", + __get_str(name), __entry->req, __entry->length, + __entry->actual, __entry->stream_id) +); + +DEFINE_EVENT(cdns3_stream_split_transfer_len, cdns3_stream_transfer_split, + TP_PROTO(struct cdns3_request *req), + TP_ARGS(req) +); + +DEFINE_EVENT(cdns3_stream_split_transfer_len, + cdns3_stream_transfer_split_next_part, + TP_PROTO(struct cdns3_request *req), + TP_ARGS(req) +); + DECLARE_EVENT_CLASS(cdns3_log_aligned_request, TP_PROTO(struct cdns3_request *priv_req), TP_ARGS(priv_req), @@ -319,6 +361,34 @@ DEFINE_EVENT(cdns3_log_aligned_request, cdns3_prepare_aligned_request, TP_ARGS(req) ); +DECLARE_EVENT_CLASS(cdns3_log_map_request, + TP_PROTO(struct cdns3_request *priv_req), + TP_ARGS(priv_req), + TP_STRUCT__entry( + __string(name, priv_req->priv_ep->name) + __field(struct usb_request *, req) + __field(void *, buf) + __field(dma_addr_t, dma) + ), + TP_fast_assign( + __assign_str(name, priv_req->priv_ep->name); + __entry->req = &priv_req->request; + __entry->buf = priv_req->request.buf; + __entry->dma = priv_req->request.dma; + ), + TP_printk("%s: req: %p, req buf %p, dma %p", + __get_str(name), __entry->req, __entry->buf, &__entry->dma + ) +); +DEFINE_EVENT(cdns3_log_map_request, cdns3_map_request, + TP_PROTO(struct cdns3_request *req), + TP_ARGS(req) +); +DEFINE_EVENT(cdns3_log_map_request, cdns3_mapped_request, + TP_PROTO(struct cdns3_request *req), + TP_ARGS(req) +); + DECLARE_EVENT_CLASS(cdns3_log_trb, TP_PROTO(struct cdns3_endpoint *priv_ep, struct cdns3_trb *trb), TP_ARGS(priv_ep, trb), @@ -329,6 +399,7 @@ DECLARE_EVENT_CLASS(cdns3_log_trb, __field(u32, length) __field(u32, control) __field(u32, type) + __field(unsigned int, last_stream_id) ), TP_fast_assign( __assign_str(name, priv_ep->name); @@ -337,8 +408,9 @@ DECLARE_EVENT_CLASS(cdns3_log_trb, __entry->length = trb->length; __entry->control = trb->control; __entry->type = usb_endpoint_type(priv_ep->endpoint.desc); + __entry->last_stream_id = priv_ep->last_stream_id; ), - TP_printk("%s: trb %p, dma buf: 0x%08x, size: %ld, burst: %d ctrl: 0x%08x (%s%s%s%s%s%s%s)", + TP_printk("%s: trb %p, dma buf: 0x%08x, size: %ld, burst: %d ctrl: 0x%08x (%s%s%s%s%s%s%s) SID:%lu LAST_SID:%u", __get_str(name), __entry->trb, __entry->buffer, TRB_LEN(__entry->length), (u8)TRB_BURST_LEN_GET(__entry->length), @@ -349,7 +421,9 @@ DECLARE_EVENT_CLASS(cdns3_log_trb, __entry->control & TRB_FIFO_MODE ? "FIFO, " : "", __entry->control & TRB_CHAIN ? "CHAIN, " : "", __entry->control & TRB_IOC ? "IOC, " : "", - TRB_FIELD_TO_TYPE(__entry->control) == TRB_NORMAL ? "Normal" : "LINK" + TRB_FIELD_TO_TYPE(__entry->control) == TRB_NORMAL ? "Normal" : "LINK", + TRB_FIELD_TO_STREAMID(__entry->control), + __entry->last_stream_id ) ); @@ -398,6 +472,7 @@ DECLARE_EVENT_CLASS(cdns3_log_ep, __field(unsigned int, maxpacket) __field(unsigned int, maxpacket_limit) __field(unsigned int, max_streams) + __field(unsigned int, use_streams) __field(unsigned int, maxburst) __field(unsigned int, flags) __field(unsigned int, dir) @@ -409,16 +484,18 @@ DECLARE_EVENT_CLASS(cdns3_log_ep, __entry->maxpacket = priv_ep->endpoint.maxpacket; __entry->maxpacket_limit = priv_ep->endpoint.maxpacket_limit; __entry->max_streams = priv_ep->endpoint.max_streams; + __entry->use_streams = priv_ep->use_streams; __entry->maxburst = priv_ep->endpoint.maxburst; __entry->flags = priv_ep->flags; __entry->dir = priv_ep->dir; __entry->enqueue = priv_ep->enqueue; __entry->dequeue = priv_ep->dequeue; ), - TP_printk("%s: mps: %d/%d. streams: %d, burst: %d, enq idx: %d, " - "deq idx: %d, flags %s%s%s%s%s%s%s%s, dir: %s", + TP_printk("%s: mps: %d/%d. streams: %d, stream enable: %d, burst: %d, " + "enq idx: %d, deq idx: %d, flags %s%s%s%s%s%s%s%s, dir: %s", __get_str(name), __entry->maxpacket, __entry->maxpacket_limit, __entry->max_streams, + __entry->use_streams, __entry->maxburst, __entry->enqueue, __entry->dequeue, __entry->flags & EP_ENABLED ? "EN | " : "", diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig index ae850b3fddf2..d53db520e209 100644 --- a/drivers/usb/chipidea/Kconfig +++ b/drivers/usb/chipidea/Kconfig @@ -7,6 +7,7 @@ config USB_CHIPIDEA select RESET_CONTROLLER select USB_ULPI_BUS select USB_ROLE_SWITCH + select USB_TEGRA_PHY if ARCH_TEGRA help Say Y here if your system has a dual role high speed USB controller based on ChipIdea silicon IP. It supports: diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h index 6911aef500e9..d49d5e1235d0 100644 --- a/drivers/usb/chipidea/ci.h +++ b/drivers/usb/chipidea/ci.h @@ -302,6 +302,16 @@ static inline enum usb_role ci_role_to_usb_role(struct ci_hdrc *ci) return USB_ROLE_NONE; } +static inline enum ci_role usb_role_to_ci_role(enum usb_role role) +{ + if (role == USB_ROLE_HOST) + return CI_ROLE_HOST; + else if (role == USB_ROLE_DEVICE) + return CI_ROLE_GADGET; + else + return CI_ROLE_END; +} + /** * hw_read_id_reg: reads from a identification register * @ci: the controller diff --git a/drivers/usb/chipidea/ci_hdrc_tegra.c b/drivers/usb/chipidea/ci_hdrc_tegra.c index 0c9911d44ee5..7455df0ede49 100644 --- a/drivers/usb/chipidea/ci_hdrc_tegra.c +++ b/drivers/usb/chipidea/ci_hdrc_tegra.c @@ -83,13 +83,6 @@ static int tegra_udc_probe(struct platform_device *pdev) return err; } - /* - * Tegra's USB PHY driver doesn't implement optional phy_init() - * hook, so we have to power on UDC controller before ChipIdea - * driver initialization kicks in. - */ - usb_phy_set_suspend(udc->phy, 0); - /* setup and register ChipIdea HDRC device */ udc->data.name = "tegra-udc"; udc->data.flags = soc->flags; @@ -109,7 +102,6 @@ static int tegra_udc_probe(struct platform_device *pdev) return 0; fail_power_off: - usb_phy_set_suspend(udc->phy, 1); clk_disable_unprepare(udc->clk); return err; } @@ -119,7 +111,6 @@ static int tegra_udc_remove(struct platform_device *pdev) struct tegra_udc *udc = platform_get_drvdata(pdev); ci_hdrc_remove_device(udc->dev); - usb_phy_set_suspend(udc->phy, 1); clk_disable_unprepare(udc->clk); return 0; diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index dce5db41501c..52139c2a9924 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -618,9 +618,11 @@ static int ci_usb_role_switch_set(struct device *dev, enum usb_role role) struct ci_hdrc *ci = dev_get_drvdata(dev); struct ci_hdrc_cable *cable = NULL; enum usb_role current_role = ci_role_to_usb_role(ci); + enum ci_role ci_role = usb_role_to_ci_role(role); unsigned long flags; - if (current_role == role) + if ((ci_role != CI_ROLE_END && !ci->roles[ci_role]) || + (current_role == role)) return 0; pm_runtime_get_sync(ci->dev); diff --git a/drivers/usb/chipidea/host.h b/drivers/usb/chipidea/host.h index 70112cf0f195..2625aa01a911 100644 --- a/drivers/usb/chipidea/host.h +++ b/drivers/usb/chipidea/host.h @@ -20,7 +20,7 @@ static inline void ci_hdrc_host_destroy(struct ci_hdrc *ci) } -static void ci_hdrc_host_driver_init(void) +static inline void ci_hdrc_host_driver_init(void) { } diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 12bb5722b420..6833c918abce 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -574,7 +574,7 @@ __acquires(ps->lock) /* Now carefully unlink all the marked pending URBs */ rescan: - list_for_each_entry(as, &ps->async_pending, asynclist) { + list_for_each_entry_reverse(as, &ps->async_pending, asynclist) { if (as->bulk_status == AS_UNLINK) { as->bulk_status = 0; /* Only once */ urb = as->urb; @@ -636,7 +636,7 @@ static void destroy_async(struct usb_dev_state *ps, struct list_head *list) spin_lock_irqsave(&ps->lock, flags); while (!list_empty(list)) { - as = list_entry(list->next, struct async, asynclist); + as = list_last_entry(list, struct async, asynclist); list_del_init(&as->asynclist); urb = as->urb; usb_get_urb(urb); diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c index 6af6add3d4c0..876ff31261d5 100644 --- a/drivers/usb/dwc2/core_intr.c +++ b/drivers/usb/dwc2/core_intr.c @@ -288,14 +288,9 @@ static void dwc2_handle_conn_id_status_change_intr(struct dwc2_hsotg *hsotg) /* * Need to schedule a work, as there are possible DELAY function calls. - * Release lock before scheduling workq as it holds spinlock during - * scheduling. */ - if (hsotg->wq_otg) { - spin_unlock(&hsotg->lock); + if (hsotg->wq_otg) queue_work(hsotg->wq_otg, &hsotg->wf_otg); - spin_lock(&hsotg->lock); - } } /** diff --git a/drivers/usb/dwc2/debugfs.c b/drivers/usb/dwc2/debugfs.c index b8f2790abf91..3a0dcbfbc827 100644 --- a/drivers/usb/dwc2/debugfs.c +++ b/drivers/usb/dwc2/debugfs.c @@ -183,6 +183,7 @@ DEFINE_SHOW_ATTRIBUTE(state); static int fifo_show(struct seq_file *seq, void *v) { struct dwc2_hsotg *hsotg = seq->private; + int fifo_count = dwc2_hsotg_tx_fifo_count(hsotg); u32 val; int idx; @@ -196,7 +197,7 @@ static int fifo_show(struct seq_file *seq, void *v) seq_puts(seq, "\nPeriodic TXFIFOs:\n"); - for (idx = 1; idx < hsotg->num_of_eps; idx++) { + for (idx = 1; idx <= fifo_count; idx++) { val = dwc2_readl(hsotg, DPTXFSIZN(idx)); seq_printf(seq, "\tDPTXFIFO%2d: Size %d, Start 0x%08x\n", idx, diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 6be10e496e10..88f7d6d4ff2d 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -3784,15 +3784,26 @@ irq_retry: for (idx = 1; idx < hsotg->num_of_eps; idx++) { hs_ep = hsotg->eps_out[idx]; /* Proceed only unmasked ISOC EPs */ - if ((BIT(idx) & ~daintmsk) || !hs_ep->isochronous) + if (BIT(idx) & ~daintmsk) continue; epctrl = dwc2_readl(hsotg, DOEPCTL(idx)); - if (epctrl & DXEPCTL_EPENA) { + //ISOC Ep's only + if ((epctrl & DXEPCTL_EPENA) && hs_ep->isochronous) { epctrl |= DXEPCTL_SNAK; epctrl |= DXEPCTL_EPDIS; dwc2_writel(hsotg, epctrl, DOEPCTL(idx)); + continue; + } + + //Non-ISOC EP's + if (hs_ep->halted) { + if (!(epctrl & DXEPCTL_EPENA)) + epctrl |= DXEPCTL_EPENA; + epctrl |= DXEPCTL_EPDIS; + epctrl |= DXEPCTL_STALL; + dwc2_writel(hsotg, epctrl, DOEPCTL(idx)); } } @@ -4056,11 +4067,12 @@ static int dwc2_hsotg_ep_enable(struct usb_ep *ep, * a unique tx-fifo even if it is non-periodic. */ if (dir_in && hsotg->dedicated_fifos) { + unsigned fifo_count = dwc2_hsotg_tx_fifo_count(hsotg); u32 fifo_index = 0; u32 fifo_size = UINT_MAX; size = hs_ep->ep.maxpacket * hs_ep->mc; - for (i = 1; i < hsotg->num_of_eps; ++i) { + for (i = 1; i <= fifo_count; ++i) { if (hsotg->fifo_map & (1 << i)) continue; val = dwc2_readl(hsotg, DPTXFSIZN(i)); @@ -4310,19 +4322,20 @@ static int dwc2_hsotg_ep_sethalt(struct usb_ep *ep, int value, bool now) epctl = dwc2_readl(hs, epreg); if (value) { - epctl |= DXEPCTL_STALL; + if (!(dwc2_readl(hs, GINTSTS) & GINTSTS_GOUTNAKEFF)) + dwc2_set_bit(hs, DCTL, DCTL_SGOUTNAK); + // STALL bit will be set in GOUTNAKEFF interrupt handler } else { epctl &= ~DXEPCTL_STALL; xfertype = epctl & DXEPCTL_EPTYPE_MASK; if (xfertype == DXEPCTL_EPTYPE_BULK || xfertype == DXEPCTL_EPTYPE_INTERRUPT) epctl |= DXEPCTL_SETD0PID; + dwc2_writel(hs, epctl, epreg); } - dwc2_writel(hs, epctl, epreg); } hs_ep->halted = value; - return 0; } diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index 81afe553aa66..b90f858af960 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -2824,7 +2824,7 @@ static int dwc2_queue_transaction(struct dwc2_hsotg *hsotg, list_move_tail(&chan->split_order_list_entry, &hsotg->split_order); - if (hsotg->params.host_dma) { + if (hsotg->params.host_dma && chan->qh) { if (hsotg->params.dma_desc_enable) { if (!chan->xfer_started || chan->ep_type == USB_ENDPOINT_XFER_ISOC) { diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index f561c6c9e8a9..1d85c42b9c67 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -1246,6 +1246,9 @@ static void dwc3_core_exit_mode(struct dwc3 *dwc) /* do nothing */ break; } + + /* de-assert DRVVBUS for HOST and OTG mode */ + dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE); } static void dwc3_get_properties(struct dwc3 *dwc) diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 1c8b349379af..77c4a9abe365 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -688,7 +688,9 @@ struct dwc3_ep { #define DWC3_EP_STALL BIT(1) #define DWC3_EP_WEDGE BIT(2) #define DWC3_EP_TRANSFER_STARTED BIT(3) +#define DWC3_EP_END_TRANSFER_PENDING BIT(4) #define DWC3_EP_PENDING_REQUEST BIT(5) +#define DWC3_EP_DELAY_START BIT(6) /* This last one is specific to EP0 */ #define DWC3_EP0_DIR_IN BIT(31) diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c index c1e9ea621f41..90bb022737da 100644 --- a/drivers/usb/dwc3/dwc3-exynos.c +++ b/drivers/usb/dwc3/dwc3-exynos.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /** - * dwc3-exynos.c - Samsung EXYNOS DWC3 Specific Glue layer + * dwc3-exynos.c - Samsung Exynos DWC3 Specific Glue layer * * Copyright (c) 2012 Samsung Electronics Co., Ltd. * http://www.samsung.com @@ -255,4 +255,4 @@ module_platform_driver(dwc3_exynos_driver); MODULE_AUTHOR("Anton Tikhomirov <av.tikhomirov@samsung.com>"); MODULE_LICENSE("GPL v2"); -MODULE_DESCRIPTION("DesignWare USB3 EXYNOS Glue Layer"); +MODULE_DESCRIPTION("DesignWare USB3 Exynos Glue Layer"); diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 294276f7deb9..7051611229c9 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -34,6 +34,7 @@ #define PCI_DEVICE_ID_INTEL_GLK 0x31aa #define PCI_DEVICE_ID_INTEL_CNPLP 0x9dee #define PCI_DEVICE_ID_INTEL_CNPH 0xa36e +#define PCI_DEVICE_ID_INTEL_CNPV 0xa3b0 #define PCI_DEVICE_ID_INTEL_ICLLP 0x34ee #define PCI_DEVICE_ID_INTEL_EHLLP 0x4b7e #define PCI_DEVICE_ID_INTEL_TGPLP 0xa0ee @@ -342,6 +343,9 @@ static const struct pci_device_id dwc3_pci_id_table[] = { { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_CNPH), (kernel_ulong_t) &dwc3_pci_intel_properties, }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_CNPV), + (kernel_ulong_t) &dwc3_pci_intel_properties, }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICLLP), (kernel_ulong_t) &dwc3_pci_intel_properties, }, diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index fd1b100d2927..6dee4dabc0a4 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -1136,8 +1136,10 @@ void dwc3_ep0_interrupt(struct dwc3 *dwc, case DWC3_DEPEVT_EPCMDCMPLT: cmd = DEPEVT_PARAMETER_CMD(event->parameters); - if (cmd == DWC3_DEPCMD_ENDTRANSFER) + if (cmd == DWC3_DEPCMD_ENDTRANSFER) { + dep->flags &= ~DWC3_EP_END_TRANSFER_PENDING; dep->flags &= ~DWC3_EP_TRANSFER_STARTED; + } break; } } diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 154f3f3e8cff..1b8014ab0b25 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -57,7 +57,7 @@ int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode) return -EINVAL; } - dwc3_writel(dwc->regs, DWC3_DCTL, reg); + dwc3_gadget_dctl_write_safe(dwc, reg); return 0; } @@ -111,6 +111,9 @@ int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state) reg = dwc3_readl(dwc->regs, DWC3_DCTL); reg &= ~DWC3_DCTL_ULSTCHNGREQ_MASK; + /* set no action before sending new link state change */ + dwc3_writel(dwc->regs, DWC3_DCTL, reg); + /* set requested state */ reg |= DWC3_DCTL_ULSTCHNGREQ(state); dwc3_writel(dwc->regs, DWC3_DCTL, reg); @@ -1447,6 +1450,12 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) list_add_tail(&req->list, &dep->pending_list); req->status = DWC3_REQUEST_STATUS_QUEUED; + /* Start the transfer only after the END_TRANSFER is completed */ + if (dep->flags & DWC3_EP_END_TRANSFER_PENDING) { + dep->flags |= DWC3_EP_DELAY_START; + return 0; + } + /* * NOTICE: Isochronous endpoints should NEVER be prestarted. We must * wait for a XferNotReady event so we will know what's the current @@ -1828,7 +1837,7 @@ static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on, int suspend) dwc->pullups_connected = false; } - dwc3_writel(dwc->regs, DWC3_DCTL, reg); + dwc3_gadget_dctl_write_safe(dwc, reg); do { reg = dwc3_readl(dwc->regs, DWC3_DSTS); @@ -2625,8 +2634,14 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc, cmd = DEPEVT_PARAMETER_CMD(event->parameters); if (cmd == DWC3_DEPCMD_ENDTRANSFER) { + dep->flags &= ~DWC3_EP_END_TRANSFER_PENDING; dep->flags &= ~DWC3_EP_TRANSFER_STARTED; dwc3_gadget_ep_cleanup_cancelled_requests(dep); + if ((dep->flags & DWC3_EP_DELAY_START) && + !usb_endpoint_xfer_isoc(dep->endpoint.desc)) + __dwc3_gadget_kick_transfer(dep); + + dep->flags &= ~DWC3_EP_DELAY_START; } break; case DWC3_DEPEVT_STREAMEVT: @@ -2678,12 +2693,12 @@ static void dwc3_reset_gadget(struct dwc3 *dwc) static void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force, bool interrupt) { - struct dwc3 *dwc = dep->dwc; struct dwc3_gadget_ep_cmd_params params; u32 cmd; int ret; - if (!(dep->flags & DWC3_EP_TRANSFER_STARTED)) + if (!(dep->flags & DWC3_EP_TRANSFER_STARTED) || + (dep->flags & DWC3_EP_END_TRANSFER_PENDING)) return; /* @@ -2693,16 +2708,13 @@ static void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force, * much trouble synchronizing between us and gadget driver. * * We have discussed this with the IP Provider and it was - * suggested to giveback all requests here, but give HW some - * extra time to synchronize with the interconnect. We're using - * an arbitrary 100us delay for that. + * suggested to giveback all requests here. * * Note also that a similar handling was tested by Synopsys * (thanks a lot Paul) and nothing bad has come out of it. - * In short, what we're doing is: - * - * - Issue EndTransfer WITH CMDIOC bit set - * - Wait 100us + * In short, what we're doing is issuing EndTransfer with + * CMDIOC bit set and delay kicking transfer until the + * EndTransfer command had completed. * * As of IP version 3.10a of the DWC_usb3 IP, the controller * supports a mode to work around the above limitation. The @@ -2711,8 +2723,7 @@ static void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force, * by writing GUCTL2[14]. This polling is already done in the * dwc3_send_gadget_ep_cmd() function so if the mode is * enabled, the EndTransfer command will have completed upon - * returning from this function and we don't need to delay for - * 100us. + * returning from this function. * * This mode is NOT available on the DWC_usb31 IP. */ @@ -2728,9 +2739,8 @@ static void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force, if (!interrupt) dep->flags &= ~DWC3_EP_TRANSFER_STARTED; - - if (dwc3_is_usb31(dwc) || dwc->revision < DWC3_REVISION_310A) - udelay(100); + else + dep->flags |= DWC3_EP_END_TRANSFER_PENDING; } static void dwc3_clear_stall_all_ep(struct dwc3 *dwc) @@ -2759,12 +2769,12 @@ static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc) { int reg; + dwc3_gadget_set_link_state(dwc, DWC3_LINK_STATE_RX_DET); + reg = dwc3_readl(dwc->regs, DWC3_DCTL); reg &= ~DWC3_DCTL_INITU1ENA; - dwc3_writel(dwc->regs, DWC3_DCTL, reg); - reg &= ~DWC3_DCTL_INITU2ENA; - dwc3_writel(dwc->regs, DWC3_DCTL, reg); + dwc3_gadget_dctl_write_safe(dwc, reg); dwc3_disconnect_gadget(dwc); @@ -2816,7 +2826,7 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc) reg = dwc3_readl(dwc->regs, DWC3_DCTL); reg &= ~DWC3_DCTL_TSTCTRL_MASK; - dwc3_writel(dwc->regs, DWC3_DCTL, reg); + dwc3_gadget_dctl_write_safe(dwc, reg); dwc->test_mode = false; dwc3_clear_stall_all_ep(dwc); @@ -2920,11 +2930,11 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) if (dwc->has_lpm_erratum && dwc->revision >= DWC3_REVISION_240A) reg |= DWC3_DCTL_NYET_THRES(dwc->lpm_nyet_threshold); - dwc3_writel(dwc->regs, DWC3_DCTL, reg); + dwc3_gadget_dctl_write_safe(dwc, reg); } else { reg = dwc3_readl(dwc->regs, DWC3_DCTL); reg &= ~DWC3_DCTL_HIRD_THRES_MASK; - dwc3_writel(dwc->regs, DWC3_DCTL, reg); + dwc3_gadget_dctl_write_safe(dwc, reg); } dep = dwc->eps[0]; @@ -3033,7 +3043,7 @@ static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc, reg &= ~u1u2; - dwc3_writel(dwc->regs, DWC3_DCTL, reg); + dwc3_gadget_dctl_write_safe(dwc, reg); break; default: /* do nothing */ diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h index 5faf4d1249e0..fbc7d8013f0b 100644 --- a/drivers/usb/dwc3/gadget.h +++ b/drivers/usb/dwc3/gadget.h @@ -127,4 +127,18 @@ static inline void dwc3_gadget_ep_get_transfer_index(struct dwc3_ep *dep) dep->resource_index = DWC3_DEPCMD_GET_RSC_IDX(res_id); } +/** + * dwc3_gadget_dctl_write_safe - write to DCTL safe from link state change + * @dwc: pointer to our context structure + * @value: value to write to DCTL + * + * Use this function when doing read-modify-write to DCTL. It will not + * send link state change request. + */ +static inline void dwc3_gadget_dctl_write_safe(struct dwc3 *dwc, u32 value) +{ + value &= ~DWC3_DCTL_ULSTCHNGREQ_MASK; + dwc3_writel(dwc->regs, DWC3_DCTL, value); +} + #endif /* __DRIVERS_USB_DWC3_GADGET_H */ diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 02ff850278b1..c6db0a0a340c 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -483,34 +483,6 @@ config USB_CONFIGFS_F_TCM Both protocols can work on USB2.0 and USB3.0. UAS utilizes the USB 3.0 feature called streams support. -choice - tristate "USB Gadget precomposed configurations" - default USB_ETH - optional - help - A Linux "Gadget Driver" talks to the USB Peripheral Controller - driver through the abstract "gadget" API. Some other operating - systems call these "client" drivers, of which "class drivers" - are a subset (implementing a USB device class specification). - A gadget driver implements one or more USB functions using - the peripheral hardware. - - Gadget drivers are hardware-neutral, or "platform independent", - except that they sometimes must understand quirks or limitations - of the particular controllers they work with. For example, when - a controller doesn't support alternate configurations or provide - enough of the right types of endpoints, the gadget driver might - not be able work with that controller, or might need to implement - a less common variant of a device class protocol. - - The available choices each represent a single precomposed USB - gadget configuration. In the device model, each option contains - both the device instantiation as a child for a USB gadget - controller, and the relevant drivers for each function declared - by the device. - source "drivers/usb/gadget/legacy/Kconfig" -endchoice - endif # USB_GADGET diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c index ab9ac48a751a..32b637e3e1fa 100644 --- a/drivers/usb/gadget/configfs.c +++ b/drivers/usb/gadget/configfs.c @@ -293,6 +293,47 @@ err: return ret; } +static ssize_t gadget_dev_desc_max_speed_show(struct config_item *item, + char *page) +{ + enum usb_device_speed speed = to_gadget_info(item)->composite.max_speed; + + return sprintf(page, "%s\n", usb_speed_string(speed)); +} + +static ssize_t gadget_dev_desc_max_speed_store(struct config_item *item, + const char *page, size_t len) +{ + struct gadget_info *gi = to_gadget_info(item); + + mutex_lock(&gi->lock); + + /* Prevent changing of max_speed after the driver is binded */ + if (gi->composite.gadget_driver.udc_name) + goto err; + + if (strncmp(page, "super-speed-plus", 16) == 0) + gi->composite.max_speed = USB_SPEED_SUPER_PLUS; + else if (strncmp(page, "super-speed", 11) == 0) + gi->composite.max_speed = USB_SPEED_SUPER; + else if (strncmp(page, "high-speed", 10) == 0) + gi->composite.max_speed = USB_SPEED_HIGH; + else if (strncmp(page, "full-speed", 10) == 0) + gi->composite.max_speed = USB_SPEED_FULL; + else if (strncmp(page, "low-speed", 9) == 0) + gi->composite.max_speed = USB_SPEED_LOW; + else + goto err; + + gi->composite.gadget_driver.max_speed = gi->composite.max_speed; + + mutex_unlock(&gi->lock); + return len; +err: + mutex_unlock(&gi->lock); + return -EINVAL; +} + CONFIGFS_ATTR(gadget_dev_desc_, bDeviceClass); CONFIGFS_ATTR(gadget_dev_desc_, bDeviceSubClass); CONFIGFS_ATTR(gadget_dev_desc_, bDeviceProtocol); @@ -302,6 +343,7 @@ CONFIGFS_ATTR(gadget_dev_desc_, idProduct); CONFIGFS_ATTR(gadget_dev_desc_, bcdDevice); CONFIGFS_ATTR(gadget_dev_desc_, bcdUSB); CONFIGFS_ATTR(gadget_dev_desc_, UDC); +CONFIGFS_ATTR(gadget_dev_desc_, max_speed); static struct configfs_attribute *gadget_root_attrs[] = { &gadget_dev_desc_attr_bDeviceClass, @@ -313,6 +355,7 @@ static struct configfs_attribute *gadget_root_attrs[] = { &gadget_dev_desc_attr_bcdDevice, &gadget_dev_desc_attr_bcdUSB, &gadget_dev_desc_attr_UDC, + &gadget_dev_desc_attr_max_speed, NULL, }; diff --git a/drivers/usb/gadget/function/f_ecm.c b/drivers/usb/gadget/function/f_ecm.c index 460d5d7c984f..7f5cf488b2b1 100644 --- a/drivers/usb/gadget/function/f_ecm.c +++ b/drivers/usb/gadget/function/f_ecm.c @@ -52,6 +52,7 @@ struct f_ecm { struct usb_ep *notify; struct usb_request *notify_req; u8 notify_state; + atomic_t notify_count; bool is_open; /* FIXME is_open needs some irq-ish locking @@ -380,7 +381,7 @@ static void ecm_do_notify(struct f_ecm *ecm) int status; /* notification already in flight? */ - if (!req) + if (atomic_read(&ecm->notify_count)) return; event = req->buf; @@ -420,10 +421,10 @@ static void ecm_do_notify(struct f_ecm *ecm) event->bmRequestType = 0xA1; event->wIndex = cpu_to_le16(ecm->ctrl_id); - ecm->notify_req = NULL; + atomic_inc(&ecm->notify_count); status = usb_ep_queue(ecm->notify, req, GFP_ATOMIC); if (status < 0) { - ecm->notify_req = req; + atomic_dec(&ecm->notify_count); DBG(cdev, "notify --> %d\n", status); } } @@ -448,17 +449,19 @@ static void ecm_notify_complete(struct usb_ep *ep, struct usb_request *req) switch (req->status) { case 0: /* no fault */ + atomic_dec(&ecm->notify_count); break; case -ECONNRESET: case -ESHUTDOWN: + atomic_set(&ecm->notify_count, 0); ecm->notify_state = ECM_NOTIFY_NONE; break; default: DBG(cdev, "event %02x --> %d\n", event->bNotificationType, req->status); + atomic_dec(&ecm->notify_count); break; } - ecm->notify_req = req; ecm_do_notify(ecm); } @@ -907,6 +910,11 @@ static void ecm_unbind(struct usb_configuration *c, struct usb_function *f) usb_free_all_descriptors(f); + if (atomic_read(&ecm->notify_count)) { + usb_ep_dequeue(ecm->notify, ecm->notify_req); + atomic_set(&ecm->notify_count, 0); + } + kfree(ecm->notify_req->buf); usb_ep_free_request(ecm->notify, ecm->notify_req); } diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index 0bbccac94d6c..6f8b67e61771 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -1062,6 +1062,7 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data) req->num_sgs = io_data->sgt.nents; } else { req->buf = data; + req->num_sgs = 0; } req->length = data_len; @@ -1105,6 +1106,7 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data) req->num_sgs = io_data->sgt.nents; } else { req->buf = data; + req->num_sgs = 0; } req->length = data_len; diff --git a/drivers/usb/gadget/function/f_ncm.c b/drivers/usb/gadget/function/f_ncm.c index 2d6e76e4cffa..1d900081b1f0 100644 --- a/drivers/usb/gadget/function/f_ncm.c +++ b/drivers/usb/gadget/function/f_ncm.c @@ -53,6 +53,7 @@ struct f_ncm { struct usb_ep *notify; struct usb_request *notify_req; u8 notify_state; + atomic_t notify_count; bool is_open; const struct ndp_parser_opts *parser_opts; @@ -547,7 +548,7 @@ static void ncm_do_notify(struct f_ncm *ncm) int status; /* notification already in flight? */ - if (!req) + if (atomic_read(&ncm->notify_count)) return; event = req->buf; @@ -587,7 +588,8 @@ static void ncm_do_notify(struct f_ncm *ncm) event->bmRequestType = 0xA1; event->wIndex = cpu_to_le16(ncm->ctrl_id); - ncm->notify_req = NULL; + atomic_inc(&ncm->notify_count); + /* * In double buffering if there is a space in FIFO, * completion callback can be called right after the call, @@ -597,7 +599,7 @@ static void ncm_do_notify(struct f_ncm *ncm) status = usb_ep_queue(ncm->notify, req, GFP_ATOMIC); spin_lock(&ncm->lock); if (status < 0) { - ncm->notify_req = req; + atomic_dec(&ncm->notify_count); DBG(cdev, "notify --> %d\n", status); } } @@ -632,17 +634,19 @@ static void ncm_notify_complete(struct usb_ep *ep, struct usb_request *req) case 0: VDBG(cdev, "Notification %02x sent\n", event->bNotificationType); + atomic_dec(&ncm->notify_count); break; case -ECONNRESET: case -ESHUTDOWN: + atomic_set(&ncm->notify_count, 0); ncm->notify_state = NCM_NOTIFY_NONE; break; default: DBG(cdev, "event %02x --> %d\n", event->bNotificationType, req->status); + atomic_dec(&ncm->notify_count); break; } - ncm->notify_req = req; ncm_do_notify(ncm); spin_unlock(&ncm->lock); } @@ -1649,6 +1653,11 @@ static void ncm_unbind(struct usb_configuration *c, struct usb_function *f) ncm_string_defs[0].id = 0; usb_free_all_descriptors(f); + if (atomic_read(&ncm->notify_count)) { + usb_ep_dequeue(ncm->notify, ncm->notify_req); + atomic_set(&ncm->notify_count, 0); + } + kfree(ncm->notify_req->buf); usb_ep_free_request(ncm->notify, ncm->notify_req); } diff --git a/drivers/usb/gadget/function/u_audio.c b/drivers/usb/gadget/function/u_audio.c index 7ec6a996af26..6d956f190f5a 100644 --- a/drivers/usb/gadget/function/u_audio.c +++ b/drivers/usb/gadget/function/u_audio.c @@ -239,18 +239,6 @@ static snd_pcm_uframes_t uac_pcm_pointer(struct snd_pcm_substream *substream) return bytes_to_frames(substream->runtime, prm->hw_ptr); } -static int uac_pcm_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *hw_params) -{ - return snd_pcm_lib_malloc_pages(substream, - params_buffer_bytes(hw_params)); -} - -static int uac_pcm_hw_free(struct snd_pcm_substream *substream) -{ - return snd_pcm_lib_free_pages(substream); -} - static int uac_pcm_open(struct snd_pcm_substream *substream) { struct snd_uac_chip *uac = snd_pcm_substream_chip(substream); @@ -326,9 +314,6 @@ static int uac_pcm_null(struct snd_pcm_substream *substream) static const struct snd_pcm_ops uac_pcm_ops = { .open = uac_pcm_open, .close = uac_pcm_null, - .ioctl = snd_pcm_lib_ioctl, - .hw_params = uac_pcm_hw_params, - .hw_free = uac_pcm_hw_free, .trigger = uac_pcm_trigger, .pointer = uac_pcm_pointer, .prepare = uac_pcm_null, @@ -422,7 +407,7 @@ int u_audio_start_playback(struct g_audio *audio_dev) struct usb_ep *ep; struct uac_rtd_params *prm; struct uac_params *params = &audio_dev->params; - unsigned int factor, rate; + unsigned int factor; const struct usb_endpoint_descriptor *ep_desc; int req_len, i; @@ -441,13 +426,15 @@ int u_audio_start_playback(struct g_audio *audio_dev) /* pre-compute some values for iso_complete() */ uac->p_framesize = params->p_ssize * num_channels(params->p_chmask); - rate = params->p_srate * uac->p_framesize; uac->p_interval = factor / (1 << (ep_desc->bInterval - 1)); - uac->p_pktsize = min_t(unsigned int, rate / uac->p_interval, + uac->p_pktsize = min_t(unsigned int, + uac->p_framesize * + (params->p_srate / uac->p_interval), prm->max_psize); if (uac->p_pktsize < prm->max_psize) - uac->p_pktsize_residue = rate % uac->p_interval; + uac->p_pktsize_residue = uac->p_framesize * + (params->p_srate % uac->p_interval); else uac->p_pktsize_residue = 0; @@ -584,8 +571,8 @@ int g_audio_setup(struct g_audio *g_audio, const char *pcm_name, strlcpy(card->shortname, card_name, sizeof(card->shortname)); sprintf(card->longname, "%s %i", card_name, card->dev->id); - snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS, - NULL, 0, BUFF_SIZE_MAX); + snd_pcm_set_managed_buffer_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS, + NULL, 0, BUFF_SIZE_MAX); err = snd_card_register(card); diff --git a/drivers/usb/gadget/legacy/Kconfig b/drivers/usb/gadget/legacy/Kconfig index 119a4e47681f..6e7e1a9202e6 100644 --- a/drivers/usb/gadget/legacy/Kconfig +++ b/drivers/usb/gadget/legacy/Kconfig @@ -14,6 +14,32 @@ # both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG). # +choice + tristate "USB Gadget precomposed configurations" + default USB_ETH + optional + help + A Linux "Gadget Driver" talks to the USB Peripheral Controller + driver through the abstract "gadget" API. Some other operating + systems call these "client" drivers, of which "class drivers" + are a subset (implementing a USB device class specification). + A gadget driver implements one or more USB functions using + the peripheral hardware. + + Gadget drivers are hardware-neutral, or "platform independent", + except that they sometimes must understand quirks or limitations + of the particular controllers they work with. For example, when + a controller doesn't support alternate configurations or provide + enough of the right types of endpoints, the gadget driver might + not be able work with that controller, or might need to implement + a less common variant of a device class protocol. + + The available choices each represent a single precomposed USB + gadget configuration. In the device model, each option contains + both the device instantiation as a child for a USB gadget + controller, and the relevant drivers for each function declared + by the device. + config USB_ZERO tristate "Gadget Zero (DEVELOPMENT)" select USB_LIBCOMPOSITE @@ -489,3 +515,5 @@ config USB_G_WEBCAM Say "y" to link the driver statically, or "m" to build a dynamically linked module called "g_webcam". + +endchoice diff --git a/drivers/usb/gadget/legacy/cdc2.c b/drivers/usb/gadget/legacy/cdc2.c index da1c37933ca1..8d7a556ece30 100644 --- a/drivers/usb/gadget/legacy/cdc2.c +++ b/drivers/usb/gadget/legacy/cdc2.c @@ -225,7 +225,7 @@ static struct usb_composite_driver cdc_driver = { .name = "g_cdc", .dev = &device_desc, .strings = dev_strings, - .max_speed = USB_SPEED_HIGH, + .max_speed = USB_SPEED_SUPER, .bind = cdc_bind, .unbind = cdc_unbind, }; diff --git a/drivers/usb/gadget/legacy/g_ffs.c b/drivers/usb/gadget/legacy/g_ffs.c index b640ed3fcf70..ae6d8f7092b8 100644 --- a/drivers/usb/gadget/legacy/g_ffs.c +++ b/drivers/usb/gadget/legacy/g_ffs.c @@ -149,7 +149,7 @@ static struct usb_composite_driver gfs_driver = { .name = DRIVER_NAME, .dev = &gfs_dev_desc, .strings = gfs_dev_strings, - .max_speed = USB_SPEED_HIGH, + .max_speed = USB_SPEED_SUPER, .bind = gfs_bind, .unbind = gfs_unbind, }; diff --git a/drivers/usb/gadget/legacy/multi.c b/drivers/usb/gadget/legacy/multi.c index 50515f9e1022..ec9749845660 100644 --- a/drivers/usb/gadget/legacy/multi.c +++ b/drivers/usb/gadget/legacy/multi.c @@ -482,7 +482,7 @@ static struct usb_composite_driver multi_driver = { .name = "g_multi", .dev = &device_desc, .strings = dev_strings, - .max_speed = USB_SPEED_HIGH, + .max_speed = USB_SPEED_SUPER, .bind = multi_bind, .unbind = multi_unbind, .needs_serial = 1, diff --git a/drivers/usb/gadget/legacy/ncm.c b/drivers/usb/gadget/legacy/ncm.c index 8465f081e921..c61e71ba7045 100644 --- a/drivers/usb/gadget/legacy/ncm.c +++ b/drivers/usb/gadget/legacy/ncm.c @@ -197,7 +197,7 @@ static struct usb_composite_driver ncm_driver = { .name = "g_ncm", .dev = &device_desc, .strings = dev_strings, - .max_speed = USB_SPEED_HIGH, + .max_speed = USB_SPEED_SUPER, .bind = gncm_bind, .unbind = gncm_unbind, }; diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c index 8a42768e3213..6e0432141c40 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.c +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c @@ -1122,7 +1122,7 @@ static struct usb_endpoint_descriptor usba_ep0_desc = { .bInterval = 1, }; -static struct usb_gadget usba_gadget_template = { +static const struct usb_gadget usba_gadget_template = { .ops = &usba_udc_ops, .max_speed = USB_SPEED_HIGH, .name = "atmel_usba_udc", diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c index 51fa614b4079..9b11046480fe 100644 --- a/drivers/usb/gadget/udc/core.c +++ b/drivers/usb/gadget/udc/core.c @@ -1414,6 +1414,8 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver) } mutex_unlock(&udc_lock); + if (ret) + pr_warn("udc-core: couldn't find an available UDC or it's busy\n"); return ret; found: ret = udc_bind_to_driver(udc, driver); diff --git a/drivers/usb/gadget/udc/gr_udc.c b/drivers/usb/gadget/udc/gr_udc.c index 64d80c65bb96..aaf975c809bf 100644 --- a/drivers/usb/gadget/udc/gr_udc.c +++ b/drivers/usb/gadget/udc/gr_udc.c @@ -2175,8 +2175,6 @@ static int gr_probe(struct platform_device *pdev) return -ENOMEM; } - spin_lock(&dev->lock); - /* Inside lock so that no gadget can use this udc until probe is done */ retval = usb_add_gadget_udc(dev->dev, &dev->gadget); if (retval) { @@ -2185,15 +2183,21 @@ static int gr_probe(struct platform_device *pdev) } dev->added = 1; + spin_lock(&dev->lock); + retval = gr_udc_init(dev); - if (retval) + if (retval) { + spin_unlock(&dev->lock); goto out; - - gr_dfs_create(dev); + } /* Clear all interrupt enables that might be left on since last boot */ gr_disable_interrupts_and_pullup(dev); + spin_unlock(&dev->lock); + + gr_dfs_create(dev); + retval = gr_request_irq(dev, dev->irq); if (retval) { dev_err(dev->dev, "Failed to request irq %d\n", dev->irq); @@ -2222,8 +2226,6 @@ static int gr_probe(struct platform_device *pdev) dev_info(dev->dev, "regs: %p, irq %d\n", dev->regs, dev->irq); out: - spin_unlock(&dev->lock); - if (retval) gr_remove(pdev); diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c index f36f0730afab..bd12417996db 100644 --- a/drivers/usb/gadget/udc/omap_udc.c +++ b/drivers/usb/gadget/udc/omap_udc.c @@ -2757,7 +2757,7 @@ static int omap_udc_probe(struct platform_device *pdev) /* NOTE: "knows" the order of the resources! */ if (!request_mem_region(pdev->resource[0].start, - pdev->resource[0].end - pdev->resource[0].start + 1, + resource_size(&pdev->resource[0]), driver_name)) { DBG("request_mem_region failed\n"); return -EBUSY; @@ -2934,7 +2934,7 @@ cleanup0: } release_mem_region(pdev->resource[0].start, - pdev->resource[0].end - pdev->resource[0].start + 1); + resource_size(&pdev->resource[0])); return status; } @@ -2950,7 +2950,7 @@ static int omap_udc_remove(struct platform_device *pdev) wait_for_completion(&done); release_mem_region(pdev->resource[0].start, - pdev->resource[0].end - pdev->resource[0].start + 1); + resource_size(&pdev->resource[0])); return 0; } diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 8d730180db06..55bdfdf11e4c 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -186,7 +186,7 @@ config USB_EHCI_FSL config USB_EHCI_MXC tristate "Support for Freescale i.MX on-chip EHCI USB controller" - depends on ARCH_MXC + depends on ARCH_MXC || COMPILE_TEST select USB_EHCI_ROOT_HUB_TT ---help--- Variation of ARC USB block used in some Freescale chips. @@ -210,8 +210,8 @@ config USB_EHCI_HCD_OMAP config USB_EHCI_HCD_ORION tristate "Support for Marvell EBU on-chip EHCI USB controller" - depends on USB_EHCI_HCD && (PLAT_ORION || ARCH_MVEBU) - default y + depends on USB_EHCI_HCD && (PLAT_ORION || ARCH_MVEBU || COMPILE_TEST) + default y if (PLAT_ORION || ARCH_MVEBU) ---help--- Enables support for the on-chip EHCI controller on Marvell's embedded ARM SoCs, including Orion, Kirkwood, Dove, Armada XP, @@ -221,15 +221,15 @@ config USB_EHCI_HCD_ORION config USB_EHCI_HCD_SPEAR tristate "Support for ST SPEAr on-chip EHCI USB controller" - depends on USB_EHCI_HCD && PLAT_SPEAR - default y + depends on USB_EHCI_HCD && (PLAT_SPEAR || COMPILE_TEST) + default y if PLAT_SPEAR ---help--- Enables support for the on-chip EHCI controller on ST SPEAr chips. config USB_EHCI_HCD_STI tristate "Support for ST STiHxxx on-chip EHCI USB controller" - depends on ARCH_STI && OF + depends on (ARCH_STI || COMPILE_TEST) && OF select GENERIC_PHY select USB_EHCI_HCD_PLATFORM help @@ -238,8 +238,8 @@ config USB_EHCI_HCD_STI config USB_EHCI_HCD_AT91 tristate "Support for Atmel on-chip EHCI USB controller" - depends on USB_EHCI_HCD && ARCH_AT91 - default y + depends on USB_EHCI_HCD && (ARCH_AT91 || COMPILE_TEST) + default y if ARCH_AT91 ---help--- Enables support for the on-chip EHCI controller on Atmel chips. @@ -263,20 +263,20 @@ config USB_EHCI_HCD_PPC_OF config USB_EHCI_SH bool "EHCI support for SuperH USB controller" - depends on SUPERH + depends on SUPERH || COMPILE_TEST ---help--- Enables support for the on-chip EHCI controller on the SuperH. If you use the PCI EHCI controller, this option is not necessary. config USB_EHCI_EXYNOS - tristate "EHCI support for Samsung S5P/EXYNOS SoC Series" - depends on ARCH_S5PV210 || ARCH_EXYNOS + tristate "EHCI support for Samsung S5P/Exynos SoC Series" + depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST help Enable support for the Samsung Exynos SOC's on-chip EHCI controller. config USB_EHCI_MV tristate "EHCI support for Marvell PXA/MMP USB controller" - depends on (ARCH_PXA || ARCH_MMP) + depends on ARCH_PXA || ARCH_MMP || COMPILE_TEST select USB_EHCI_ROOT_HUB_TT ---help--- Enables support for Marvell (including PXA and MMP series) on-chip @@ -289,7 +289,7 @@ config USB_EHCI_MV config USB_CNS3XXX_EHCI bool "Cavium CNS3XXX EHCI Module (DEPRECATED)" - depends on ARCH_CNS3XXX + depends on ARCH_CNS3XXX || COMPILE_TEST select USB_EHCI_HCD_PLATFORM ---help--- This option is deprecated now and the driver was removed, use @@ -410,15 +410,15 @@ config USB_OHCI_HCD_OMAP1 config USB_OHCI_HCD_SPEAR tristate "Support for ST SPEAr on-chip OHCI USB controller" - depends on USB_OHCI_HCD && PLAT_SPEAR - default y + depends on USB_OHCI_HCD && (PLAT_SPEAR || COMPILE_TEST) + default y if PLAT_SPEAR ---help--- Enables support for the on-chip OHCI controller on ST SPEAr chips. config USB_OHCI_HCD_STI tristate "Support for ST STiHxxx on-chip OHCI USB controller" - depends on ARCH_STI && OF + depends on (ARCH_STI || COMPILE_TEST) && OF select GENERIC_PHY select USB_OHCI_HCD_PLATFORM help @@ -427,8 +427,8 @@ config USB_OHCI_HCD_STI config USB_OHCI_HCD_S3C2410 tristate "OHCI support for Samsung S3C24xx/S3C64xx SoC series" - depends on USB_OHCI_HCD && (ARCH_S3C24XX || ARCH_S3C64XX) - default y + depends on USB_OHCI_HCD && (ARCH_S3C24XX || ARCH_S3C64XX || COMPILE_TEST) + default y if (ARCH_S3C24XX || ARCH_S3C64XX) ---help--- Enables support for the on-chip OHCI controller on S3C24xx/S3C64xx chips. @@ -453,17 +453,17 @@ config USB_OHCI_HCD_PXA27X config USB_OHCI_HCD_AT91 tristate "Support for Atmel on-chip OHCI USB controller" - depends on USB_OHCI_HCD && ARCH_AT91 && OF - default y + depends on USB_OHCI_HCD && (ARCH_AT91 || COMPILE_TEST) && OF + default y if ARCH_AT91 ---help--- Enables support for the on-chip OHCI controller on Atmel chips. config USB_OHCI_HCD_OMAP3 tristate "OHCI support for OMAP3 and later chips" - depends on (ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5) + depends on ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5 || COMPILE_TEST select USB_OHCI_HCD_PLATFORM - default y + default y if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5 help This option is deprecated now and the driver was removed, use USB_OHCI_HCD_PLATFORM instead. @@ -473,10 +473,10 @@ config USB_OHCI_HCD_OMAP3 config USB_OHCI_HCD_DAVINCI tristate "OHCI support for TI DaVinci DA8xx" - depends on ARCH_DAVINCI_DA8XX + depends on ARCH_DAVINCI_DA8XX || COMPILE_TEST depends on USB_OHCI_HCD select PHY_DA8XX_USB - default y + default y if ARCH_DAVINCI_DA8XX help Enables support for the DaVinci DA8xx integrated OHCI controller. This driver cannot currently be a loadable @@ -532,7 +532,7 @@ config USB_OHCI_HCD_SSB config USB_OHCI_SH bool "OHCI support for SuperH USB controller (DEPRECATED)" - depends on SUPERH + depends on SUPERH || COMPILE_TEST select USB_OHCI_HCD_PLATFORM ---help--- This option is deprecated now and the driver was removed, use @@ -542,14 +542,14 @@ config USB_OHCI_SH If you use the PCI OHCI controller, this option is not necessary. config USB_OHCI_EXYNOS - tristate "OHCI support for Samsung S5P/EXYNOS SoC Series" - depends on ARCH_S5PV210 || ARCH_EXYNOS + tristate "OHCI support for Samsung S5P/Exynos SoC Series" + depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST help Enable support for the Samsung Exynos SOC's on-chip OHCI controller. config USB_CNS3XXX_OHCI bool "Cavium CNS3XXX OHCI Module (DEPRECATED)" - depends on ARCH_CNS3XXX + depends on ARCH_CNS3XXX || COMPILE_TEST select USB_OHCI_HCD_PLATFORM ---help--- This option is deprecated now and the driver was removed, use diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c index 01debfd03d4a..a4e9abcbdc4f 100644 --- a/drivers/usb/host/ehci-exynos.c +++ b/drivers/usb/host/ehci-exynos.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * SAMSUNG EXYNOS USB HOST EHCI Controller + * Samsung Exynos USB HOST EHCI Controller * * Copyright (C) 2011 Samsung Electronics Co.Ltd * Author: Jingoo Han <jg1.han@samsung.com> @@ -21,7 +21,7 @@ #include "ehci.h" -#define DRIVER_DESC "EHCI EXYNOS driver" +#define DRIVER_DESC "EHCI Exynos driver" #define EHCI_INSNREG00(base) (base + 0x90) #define EHCI_INSNREG00_ENA_INCR16 (0x1 << 25) diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c index 66ec1fdf9fe7..bd4f6ef534d9 100644 --- a/drivers/usb/host/ehci-mv.c +++ b/drivers/usb/host/ehci-mv.c @@ -11,6 +11,7 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/usb/otg.h> +#include <linux/usb/of.h> #include <linux/platform_data/mv_usb.h> #include <linux/io.h> @@ -67,6 +68,8 @@ static int mv_ehci_reset(struct usb_hcd *hcd) { struct device *dev = hcd->self.controller; struct ehci_hcd_mv *ehci_mv = hcd_to_ehci_hcd_mv(hcd); + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + u32 status; int retval; if (ehci_mv == NULL) { @@ -80,6 +83,14 @@ static int mv_ehci_reset(struct usb_hcd *hcd) if (retval) dev_err(dev, "ehci_setup failed %d\n", retval); + if (of_usb_get_phy_mode(dev->of_node) == USBPHY_INTERFACE_MODE_HSIC) { + status = ehci_readl(ehci, &ehci->regs->port_status[0]); + status |= PORT_TEST_FORCE; + ehci_writel(ehci, status, &ehci->regs->port_status[0]); + status &= ~PORT_TEST_FORCE; + ehci_writel(ehci, status, &ehci->regs->port_status[0]); + } + return retval; } @@ -116,7 +127,7 @@ static int mv_ehci_probe(struct platform_device *pdev) ehci_mv->set_vbus = pdata->set_vbus; } - ehci_mv->phy = devm_phy_get(&pdev->dev, "usb"); + ehci_mv->phy = devm_phy_optional_get(&pdev->dev, "usb"); if (IS_ERR(ehci_mv->phy)) { retval = PTR_ERR(ehci_mv->phy); if (retval != -EPROBE_DEFER) @@ -164,7 +175,7 @@ static int mv_ehci_probe(struct platform_device *pdev) } ehci = hcd_to_ehci(hcd); - ehci->caps = (struct ehci_caps *) ehci_mv->cap_regs; + ehci->caps = (struct ehci_caps __iomem *) ehci_mv->cap_regs; if (ehci_mv->mode == MV_USB_MODE_OTG) { ehci_mv->otg = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); @@ -246,10 +257,8 @@ static int mv_ehci_remove(struct platform_device *pdev) MODULE_ALIAS("mv-ehci"); static const struct platform_device_id ehci_id_table[] = { - {"pxa-u2oehci", PXA_U2OEHCI}, - {"pxa-sph", PXA_SPH}, - {"mmp3-hsic", MMP3_HSIC}, - {"mmp3-fsic", MMP3_FSIC}, + {"pxa-u2oehci", 0}, + {"pxa-sph", 0}, {}, }; diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c index 2afde14dc425..c25c51d26f26 100644 --- a/drivers/usb/host/ehci-sh.c +++ b/drivers/usb/host/ehci-sh.c @@ -8,7 +8,6 @@ */ #include <linux/platform_device.h> #include <linux/clk.h> -#include <linux/platform_data/ehci-sh.h> struct ehci_sh_priv { struct clk *iclk, *fclk; @@ -76,7 +75,6 @@ static int ehci_hcd_sh_probe(struct platform_device *pdev) { struct resource *res; struct ehci_sh_priv *priv; - struct ehci_sh_platdata *pdata; struct usb_hcd *hcd; int irq, ret; @@ -89,8 +87,6 @@ static int ehci_hcd_sh_probe(struct platform_device *pdev) goto fail_create_hcd; } - pdata = dev_get_platdata(&pdev->dev); - /* initialize hcd */ hcd = usb_create_hcd(&ehci_sh_hc_driver, &pdev->dev, dev_name(&pdev->dev)); @@ -127,9 +123,6 @@ static int ehci_hcd_sh_probe(struct platform_device *pdev) clk_enable(priv->fclk); clk_enable(priv->iclk); - if (pdata && pdata->phy_init) - pdata->phy_init(); - ret = usb_add_hcd(hcd, irq, IRQF_SHARED); if (ret != 0) { dev_err(&pdev->dev, "Failed to add hcd"); diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 4d2cdec4cb78..d6433f206c17 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -42,12 +42,10 @@ struct tegra_ehci_soc_config { }; struct tegra_ehci_hcd { - struct tegra_usb_phy *phy; struct clk *clk; struct reset_control *rst; int port_resuming; bool needs_double_reset; - enum tegra_usb_phy_port_speed port_speed; }; static int tegra_reset_usb_controller(struct platform_device *pdev) @@ -480,12 +478,6 @@ static int tegra_ehci_probe(struct platform_device *pdev) } u_phy->otg->host = hcd_to_bus(hcd); - err = usb_phy_set_suspend(hcd->usb_phy, 0); - if (err) { - dev_err(&pdev->dev, "Failed to power on the phy\n"); - goto cleanup_phy; - } - irq = platform_get_irq(pdev, 0); if (!irq) { dev_err(&pdev->dev, "Failed to get IRQ\n"); @@ -521,16 +513,10 @@ static int tegra_ehci_remove(struct platform_device *pdev) struct tegra_ehci_hcd *tegra = (struct tegra_ehci_hcd *)hcd_to_ehci(hcd)->priv; + usb_remove_hcd(hcd); otg_set_host(hcd->usb_phy->otg, NULL); - usb_phy_shutdown(hcd->usb_phy); - usb_remove_hcd(hcd); - - reset_control_assert(tegra->rst); - udelay(1); - clk_disable_unprepare(tegra->clk); - usb_put_hcd(hcd); return 0; diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c index d5ce98e205c7..bd40e597f256 100644 --- a/drivers/usb/host/ohci-exynos.c +++ b/drivers/usb/host/ohci-exynos.c @@ -19,7 +19,7 @@ #include "ohci.h" -#define DRIVER_DESC "OHCI EXYNOS driver" +#define DRIVER_DESC "OHCI Exynos driver" static const char hcd_name[] = "ohci-exynos"; static struct hc_driver __read_mostly exynos_ohci_hc_driver; diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c index fe09b8626329..120666a0d590 100644 --- a/drivers/usb/host/oxu210hp-hcd.c +++ b/drivers/usb/host/oxu210hp-hcd.c @@ -2783,11 +2783,15 @@ static void ehci_port_power(struct oxu_hcd *oxu, int is_on) return; oxu_dbg(oxu, "...power%s ports...\n", is_on ? "up" : "down"); - for (port = HCS_N_PORTS(oxu->hcs_params); port > 0; ) - (void) oxu_hub_control(oxu_to_hcd(oxu), - is_on ? SetPortFeature : ClearPortFeature, - USB_PORT_FEAT_POWER, - port--, NULL, 0); + for (port = HCS_N_PORTS(oxu->hcs_params); port > 0; ) { + if (is_on) + oxu_hub_control(oxu_to_hcd(oxu), SetPortFeature, + USB_PORT_FEAT_POWER, port--, NULL, 0); + else + oxu_hub_control(oxu_to_hcd(oxu), ClearPortFeature, + USB_PORT_FEAT_POWER, port--, NULL, 0); + } + msleep(20); } diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c index b18a6baef204..bfbdb3ceed29 100644 --- a/drivers/usb/host/xhci-mtk.c +++ b/drivers/usb/host/xhci-mtk.c @@ -488,11 +488,6 @@ static int xhci_mtk_probe(struct platform_device *pdev) goto disable_clk; } - /* Initialize dma_mask and coherent_dma_mask to 32-bits */ - ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32)); - if (ret) - goto disable_clk; - hcd = usb_create_hcd(driver, dev, dev_name(dev)); if (!hcd) { ret = -ENOMEM; diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c index bf9065438320..8163aefc6c6b 100644 --- a/drivers/usb/host/xhci-tegra.c +++ b/drivers/usb/host/xhci-tegra.c @@ -11,6 +11,7 @@ #include <linux/dma-mapping.h> #include <linux/firmware.h> #include <linux/interrupt.h> +#include <linux/iopoll.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/of_device.h> @@ -38,7 +39,15 @@ #define XUSB_CFG_4 0x010 #define XUSB_BASE_ADDR_SHIFT 15 #define XUSB_BASE_ADDR_MASK 0x1ffff +#define XUSB_CFG_16 0x040 +#define XUSB_CFG_24 0x060 +#define XUSB_CFG_AXI_CFG 0x0f8 #define XUSB_CFG_ARU_C11_CSBRANGE 0x41c +#define XUSB_CFG_ARU_CONTEXT 0x43c +#define XUSB_CFG_ARU_CONTEXT_HS_PLS 0x478 +#define XUSB_CFG_ARU_CONTEXT_FS_PLS 0x47c +#define XUSB_CFG_ARU_CONTEXT_HSFS_SPEED 0x480 +#define XUSB_CFG_ARU_CONTEXT_HSFS_PP 0x484 #define XUSB_CFG_CSB_BASE_ADDR 0x800 /* FPCI mailbox registers */ @@ -62,11 +71,20 @@ #define MBOX_SMI_INTR_EN BIT(3) /* IPFS registers */ +#define IPFS_XUSB_HOST_MSI_BAR_SZ_0 0x0c0 +#define IPFS_XUSB_HOST_MSI_AXI_BAR_ST_0 0x0c4 +#define IPFS_XUSB_HOST_MSI_FPCI_BAR_ST_0 0x0c8 +#define IPFS_XUSB_HOST_MSI_VEC0_0 0x100 +#define IPFS_XUSB_HOST_MSI_EN_VEC0_0 0x140 #define IPFS_XUSB_HOST_CONFIGURATION_0 0x180 #define IPFS_EN_FPCI BIT(0) +#define IPFS_XUSB_HOST_FPCI_ERROR_MASKS_0 0x184 #define IPFS_XUSB_HOST_INTR_MASK_0 0x188 #define IPFS_IP_INT_MASK BIT(16) +#define IPFS_XUSB_HOST_INTR_ENABLE_0 0x198 +#define IPFS_XUSB_HOST_UFPCI_CONFIG_0 0x19c #define IPFS_XUSB_HOST_CLKGATE_HYSTERESIS_0 0x1bc +#define IPFS_XUSB_HOST_MCCIF_FIFOCTRL_0 0x1dc #define CSB_PAGE_SELECT_MASK 0x7fffff #define CSB_PAGE_SELECT_SHIFT 9 @@ -101,6 +119,8 @@ #define L2IMEMOP_ACTION_SHIFT 24 #define L2IMEMOP_INVALIDATE_ALL (0x40 << L2IMEMOP_ACTION_SHIFT) #define L2IMEMOP_LOAD_LOCKED_RESULT (0x11 << L2IMEMOP_ACTION_SHIFT) +#define XUSB_CSB_MEMPOOL_L2IMEMOP_RESULT 0x101a18 +#define L2IMEMOP_RESULT_VLD BIT(31) #define XUSB_CSB_MP_APMAP 0x10181c #define APMAP_BOOTPATH BIT(31) @@ -145,19 +165,32 @@ struct tegra_xusb_phy_type { unsigned int num; }; -struct tega_xusb_mbox_regs { +struct tegra_xusb_mbox_regs { u16 cmd; u16 data_in; u16 data_out; u16 owner; }; +struct tegra_xusb_context_soc { + struct { + const unsigned int *offsets; + unsigned int num_offsets; + } ipfs; + + struct { + const unsigned int *offsets; + unsigned int num_offsets; + } fpci; +}; + struct tegra_xusb_soc { const char *firmware; const char * const *supply_names; unsigned int num_supplies; const struct tegra_xusb_phy_type *phy_types; unsigned int num_types; + const struct tegra_xusb_context_soc *context; struct { struct { @@ -166,12 +199,17 @@ struct tegra_xusb_soc { } usb2, ulpi, hsic, usb3; } ports; - struct tega_xusb_mbox_regs mbox; + struct tegra_xusb_mbox_regs mbox; bool scale_ss_clock; bool has_ipfs; }; +struct tegra_xusb_context { + u32 *ipfs; + u32 *fpci; +}; + struct tegra_xusb { struct device *dev; void __iomem *regs; @@ -218,6 +256,8 @@ struct tegra_xusb { void *virt; dma_addr_t phys; } fw; + + struct tegra_xusb_context context; }; static struct hc_driver __read_mostly tegra_xhci_hc_driver; @@ -623,9 +663,9 @@ static irqreturn_t tegra_xusb_mbox_thread(int irq, void *data) return IRQ_HANDLED; } -static void tegra_xusb_config(struct tegra_xusb *tegra, - struct resource *regs) +static void tegra_xusb_config(struct tegra_xusb *tegra) { + u32 regs = tegra->hcd->rsrc_start; u32 value; if (tegra->soc->has_ipfs) { @@ -639,7 +679,7 @@ static void tegra_xusb_config(struct tegra_xusb *tegra, /* Program BAR0 space */ value = fpci_readl(tegra, XUSB_CFG_4); value &= ~(XUSB_BASE_ADDR_MASK << XUSB_BASE_ADDR_SHIFT); - value |= regs->start & (XUSB_BASE_ADDR_MASK << XUSB_BASE_ADDR_SHIFT); + value |= regs & (XUSB_BASE_ADDR_MASK << XUSB_BASE_ADDR_SHIFT); fpci_writel(tegra, value, XUSB_CFG_4); usleep_range(100, 200); @@ -793,17 +833,34 @@ disable_clk: return err; } -static int tegra_xusb_load_firmware(struct tegra_xusb *tegra) +#ifdef CONFIG_PM_SLEEP +static int tegra_xusb_init_context(struct tegra_xusb *tegra) +{ + const struct tegra_xusb_context_soc *soc = tegra->soc->context; + + tegra->context.ipfs = devm_kcalloc(tegra->dev, soc->ipfs.num_offsets, + sizeof(u32), GFP_KERNEL); + if (!tegra->context.ipfs) + return -ENOMEM; + + tegra->context.fpci = devm_kcalloc(tegra->dev, soc->ipfs.num_offsets, + sizeof(u32), GFP_KERNEL); + if (!tegra->context.fpci) + return -ENOMEM; + + return 0; +} +#else +static inline int tegra_xusb_init_context(struct tegra_xusb *tegra) +{ + return 0; +} +#endif + +static int tegra_xusb_request_firmware(struct tegra_xusb *tegra) { - unsigned int code_tag_blocks, code_size_blocks, code_blocks; struct tegra_xusb_fw_header *header; - struct device *dev = tegra->dev; const struct firmware *fw; - unsigned long timeout; - time64_t timestamp; - struct tm time; - u64 address; - u32 value; int err; err = request_firmware(&fw, tegra->soc->firmware, tegra->dev); @@ -828,6 +885,26 @@ static int tegra_xusb_load_firmware(struct tegra_xusb *tegra) memcpy(tegra->fw.virt, fw->data, tegra->fw.size); release_firmware(fw); + return 0; +} + +static int tegra_xusb_load_firmware(struct tegra_xusb *tegra) +{ + unsigned int code_tag_blocks, code_size_blocks, code_blocks; + struct xhci_cap_regs __iomem *cap = tegra->regs; + struct tegra_xusb_fw_header *header; + struct device *dev = tegra->dev; + struct xhci_op_regs __iomem *op; + unsigned long timeout; + time64_t timestamp; + struct tm time; + u64 address; + u32 value; + int err; + + header = (struct tegra_xusb_fw_header *)tegra->fw.virt; + op = tegra->regs + HC_LENGTH(readl(&cap->hc_capbase)); + if (csb_readl(tegra, XUSB_CSB_MP_ILOAD_BASE_LO) != 0) { dev_info(dev, "Firmware already loaded, Falcon state %#x\n", csb_readl(tegra, XUSB_FALC_CPUCTL)); @@ -882,26 +959,37 @@ static int tegra_xusb_load_firmware(struct tegra_xusb *tegra) csb_writel(tegra, 0, XUSB_FALC_DMACTL); - msleep(50); + /* wait for RESULT_VLD to get set */ +#define tegra_csb_readl(offset) csb_readl(tegra, offset) + err = readx_poll_timeout(tegra_csb_readl, + XUSB_CSB_MEMPOOL_L2IMEMOP_RESULT, value, + value & L2IMEMOP_RESULT_VLD, 100, 10000); + if (err < 0) { + dev_err(dev, "DMA controller not ready %#010x\n", value); + return err; + } +#undef tegra_csb_readl csb_writel(tegra, le32_to_cpu(header->boot_codetag), XUSB_FALC_BOOTVEC); - /* Boot Falcon CPU and wait for it to enter the STOPPED (idle) state. */ - timeout = jiffies + msecs_to_jiffies(5); - + /* Boot Falcon CPU and wait for USBSTS_CNR to get cleared. */ csb_writel(tegra, CPUCTL_STARTCPU, XUSB_FALC_CPUCTL); - while (time_before(jiffies, timeout)) { - if (csb_readl(tegra, XUSB_FALC_CPUCTL) == CPUCTL_STATE_STOPPED) + timeout = jiffies + msecs_to_jiffies(200); + + do { + value = readl(&op->status); + if ((value & STS_CNR) == 0) break; - usleep_range(100, 200); - } + usleep_range(1000, 2000); + } while (time_is_after_jiffies(timeout)); - if (csb_readl(tegra, XUSB_FALC_CPUCTL) != CPUCTL_STATE_STOPPED) { - dev_err(dev, "Falcon failed to start, state: %#x\n", - csb_readl(tegra, XUSB_FALC_CPUCTL)); + value = readl(&op->status); + if (value & STS_CNR) { + value = csb_readl(tegra, XUSB_FALC_CPUCTL); + dev_err(dev, "XHCI controller not read: %#010x\n", value); return -EIO; } @@ -966,11 +1054,37 @@ static int tegra_xusb_powerdomain_init(struct device *dev, return 0; } -static int tegra_xusb_probe(struct platform_device *pdev) +static int __tegra_xusb_enable_firmware_messages(struct tegra_xusb *tegra) { struct tegra_xusb_mbox_msg msg; - struct resource *regs; + int err; + + /* Enable firmware messages from controller. */ + msg.cmd = MBOX_CMD_MSG_ENABLED; + msg.data = 0; + + err = tegra_xusb_mbox_send(tegra, &msg); + if (err < 0) + dev_err(tegra->dev, "failed to enable messages: %d\n", err); + + return err; +} + +static int tegra_xusb_enable_firmware_messages(struct tegra_xusb *tegra) +{ + int err; + + mutex_lock(&tegra->lock); + err = __tegra_xusb_enable_firmware_messages(tegra); + mutex_unlock(&tegra->lock); + + return err; +} + +static int tegra_xusb_probe(struct platform_device *pdev) +{ struct tegra_xusb *tegra; + struct resource *regs; struct xhci_hcd *xhci; unsigned int i, j, k; struct phy *phy; @@ -986,6 +1100,10 @@ static int tegra_xusb_probe(struct platform_device *pdev) mutex_init(&tegra->lock); tegra->dev = &pdev->dev; + err = tegra_xusb_init_context(tegra); + if (err < 0) + return err; + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); tegra->regs = devm_ioremap_resource(&pdev->dev, regs); if (IS_ERR(tegra->regs)) @@ -1173,6 +1291,10 @@ static int tegra_xusb_probe(struct platform_device *pdev) goto put_powerdomains; } + tegra->hcd->regs = tegra->regs; + tegra->hcd->rsrc_start = regs->start; + tegra->hcd->rsrc_len = resource_size(regs); + /* * This must happen after usb_create_hcd(), because usb_create_hcd() * will overwrite the drvdata of the device with the hcd it creates. @@ -1185,19 +1307,6 @@ static int tegra_xusb_probe(struct platform_device *pdev) goto put_hcd; } - pm_runtime_enable(&pdev->dev); - if (pm_runtime_enabled(&pdev->dev)) - err = pm_runtime_get_sync(&pdev->dev); - else - err = tegra_xusb_runtime_resume(&pdev->dev); - - if (err < 0) { - dev_err(&pdev->dev, "failed to enable device: %d\n", err); - goto disable_phy; - } - - tegra_xusb_config(tegra, regs); - /* * The XUSB Falcon microcontroller can only address 40 bits, so set * the DMA mask accordingly. @@ -1205,19 +1314,35 @@ static int tegra_xusb_probe(struct platform_device *pdev) err = dma_set_mask_and_coherent(tegra->dev, DMA_BIT_MASK(40)); if (err < 0) { dev_err(&pdev->dev, "failed to set DMA mask: %d\n", err); - goto put_rpm; + goto disable_phy; + } + + err = tegra_xusb_request_firmware(tegra); + if (err < 0) { + dev_err(&pdev->dev, "failed to request firmware: %d\n", err); + goto disable_phy; + } + + pm_runtime_enable(&pdev->dev); + + if (!pm_runtime_enabled(&pdev->dev)) + err = tegra_xusb_runtime_resume(&pdev->dev); + else + err = pm_runtime_get_sync(&pdev->dev); + + if (err < 0) { + dev_err(&pdev->dev, "failed to enable device: %d\n", err); + goto free_firmware; } + tegra_xusb_config(tegra); + err = tegra_xusb_load_firmware(tegra); if (err < 0) { dev_err(&pdev->dev, "failed to load firmware: %d\n", err); goto put_rpm; } - tegra->hcd->regs = tegra->regs; - tegra->hcd->rsrc_start = regs->start; - tegra->hcd->rsrc_len = resource_size(regs); - err = usb_add_hcd(tegra->hcd, tegra->xhci_irq, IRQF_SHARED); if (err < 0) { dev_err(&pdev->dev, "failed to add USB HCD: %d\n", err); @@ -1244,21 +1369,12 @@ static int tegra_xusb_probe(struct platform_device *pdev) goto put_usb3; } - mutex_lock(&tegra->lock); - - /* Enable firmware messages from controller. */ - msg.cmd = MBOX_CMD_MSG_ENABLED; - msg.data = 0; - - err = tegra_xusb_mbox_send(tegra, &msg); + err = tegra_xusb_enable_firmware_messages(tegra); if (err < 0) { dev_err(&pdev->dev, "failed to enable messages: %d\n", err); - mutex_unlock(&tegra->lock); goto remove_usb3; } - mutex_unlock(&tegra->lock); - err = devm_request_threaded_irq(&pdev->dev, tegra->mbox_irq, tegra_xusb_mbox_irq, tegra_xusb_mbox_thread, 0, @@ -1281,6 +1397,9 @@ put_rpm: tegra_xusb_runtime_suspend(&pdev->dev); put_hcd: usb_put_hcd(tegra->hcd); +free_firmware: + dma_free_coherent(&pdev->dev, tegra->fw.size, tegra->fw.virt, + tegra->fw.phys); disable_phy: tegra_xusb_phy_disable(tegra); pm_runtime_disable(&pdev->dev); @@ -1328,22 +1447,176 @@ static int tegra_xusb_remove(struct platform_device *pdev) } #ifdef CONFIG_PM_SLEEP +static bool xhci_hub_ports_suspended(struct xhci_hub *hub) +{ + struct device *dev = hub->hcd->self.controller; + bool status = true; + unsigned int i; + u32 value; + + for (i = 0; i < hub->num_ports; i++) { + value = readl(hub->ports[i]->addr); + if ((value & PORT_PE) == 0) + continue; + + if ((value & PORT_PLS_MASK) != XDEV_U3) { + dev_info(dev, "%u-%u isn't suspended: %#010x\n", + hub->hcd->self.busnum, i + 1, value); + status = false; + } + } + + return status; +} + +static int tegra_xusb_check_ports(struct tegra_xusb *tegra) +{ + struct xhci_hcd *xhci = hcd_to_xhci(tegra->hcd); + unsigned long flags; + int err = 0; + + spin_lock_irqsave(&xhci->lock, flags); + + if (!xhci_hub_ports_suspended(&xhci->usb2_rhub) || + !xhci_hub_ports_suspended(&xhci->usb3_rhub)) + err = -EBUSY; + + spin_unlock_irqrestore(&xhci->lock, flags); + + return err; +} + +static void tegra_xusb_save_context(struct tegra_xusb *tegra) +{ + const struct tegra_xusb_context_soc *soc = tegra->soc->context; + struct tegra_xusb_context *ctx = &tegra->context; + unsigned int i; + + if (soc->ipfs.num_offsets > 0) { + for (i = 0; i < soc->ipfs.num_offsets; i++) + ctx->ipfs[i] = ipfs_readl(tegra, soc->ipfs.offsets[i]); + } + + if (soc->fpci.num_offsets > 0) { + for (i = 0; i < soc->fpci.num_offsets; i++) + ctx->fpci[i] = fpci_readl(tegra, soc->fpci.offsets[i]); + } +} + +static void tegra_xusb_restore_context(struct tegra_xusb *tegra) +{ + const struct tegra_xusb_context_soc *soc = tegra->soc->context; + struct tegra_xusb_context *ctx = &tegra->context; + unsigned int i; + + if (soc->fpci.num_offsets > 0) { + for (i = 0; i < soc->fpci.num_offsets; i++) + fpci_writel(tegra, ctx->fpci[i], soc->fpci.offsets[i]); + } + + if (soc->ipfs.num_offsets > 0) { + for (i = 0; i < soc->ipfs.num_offsets; i++) + ipfs_writel(tegra, ctx->ipfs[i], soc->ipfs.offsets[i]); + } +} + +static int tegra_xusb_enter_elpg(struct tegra_xusb *tegra, bool wakeup) +{ + struct xhci_hcd *xhci = hcd_to_xhci(tegra->hcd); + int err; + + err = tegra_xusb_check_ports(tegra); + if (err < 0) { + dev_err(tegra->dev, "not all ports suspended: %d\n", err); + return err; + } + + err = xhci_suspend(xhci, wakeup); + if (err < 0) { + dev_err(tegra->dev, "failed to suspend XHCI: %d\n", err); + return err; + } + + tegra_xusb_save_context(tegra); + tegra_xusb_phy_disable(tegra); + tegra_xusb_clk_disable(tegra); + + return 0; +} + +static int tegra_xusb_exit_elpg(struct tegra_xusb *tegra, bool wakeup) +{ + struct xhci_hcd *xhci = hcd_to_xhci(tegra->hcd); + int err; + + err = tegra_xusb_clk_enable(tegra); + if (err < 0) { + dev_err(tegra->dev, "failed to enable clocks: %d\n", err); + return err; + } + + err = tegra_xusb_phy_enable(tegra); + if (err < 0) { + dev_err(tegra->dev, "failed to enable PHYs: %d\n", err); + goto disable_clk; + } + + tegra_xusb_config(tegra); + tegra_xusb_restore_context(tegra); + + err = tegra_xusb_load_firmware(tegra); + if (err < 0) { + dev_err(tegra->dev, "failed to load firmware: %d\n", err); + goto disable_phy; + } + + err = __tegra_xusb_enable_firmware_messages(tegra); + if (err < 0) { + dev_err(tegra->dev, "failed to enable messages: %d\n", err); + goto disable_phy; + } + + err = xhci_resume(xhci, true); + if (err < 0) { + dev_err(tegra->dev, "failed to resume XHCI: %d\n", err); + goto disable_phy; + } + + return 0; + +disable_phy: + tegra_xusb_phy_disable(tegra); +disable_clk: + tegra_xusb_clk_disable(tegra); + return err; +} + static int tegra_xusb_suspend(struct device *dev) { struct tegra_xusb *tegra = dev_get_drvdata(dev); - struct xhci_hcd *xhci = hcd_to_xhci(tegra->hcd); bool wakeup = device_may_wakeup(dev); + int err; + + synchronize_irq(tegra->mbox_irq); - /* TODO: Powergate controller across suspend/resume. */ - return xhci_suspend(xhci, wakeup); + mutex_lock(&tegra->lock); + err = tegra_xusb_enter_elpg(tegra, wakeup); + mutex_unlock(&tegra->lock); + + return err; } static int tegra_xusb_resume(struct device *dev) { struct tegra_xusb *tegra = dev_get_drvdata(dev); - struct xhci_hcd *xhci = hcd_to_xhci(tegra->hcd); + bool wakeup = device_may_wakeup(dev); + int err; - return xhci_resume(xhci, 0); + mutex_lock(&tegra->lock); + err = tegra_xusb_exit_elpg(tegra, wakeup); + mutex_unlock(&tegra->lock); + + return err; } #endif @@ -1370,12 +1643,50 @@ static const struct tegra_xusb_phy_type tegra124_phy_types[] = { { .name = "hsic", .num = 2, }, }; +static const unsigned int tegra124_xusb_context_ipfs[] = { + IPFS_XUSB_HOST_MSI_BAR_SZ_0, + IPFS_XUSB_HOST_MSI_BAR_SZ_0, + IPFS_XUSB_HOST_MSI_AXI_BAR_ST_0, + IPFS_XUSB_HOST_MSI_FPCI_BAR_ST_0, + IPFS_XUSB_HOST_MSI_VEC0_0, + IPFS_XUSB_HOST_MSI_EN_VEC0_0, + IPFS_XUSB_HOST_FPCI_ERROR_MASKS_0, + IPFS_XUSB_HOST_INTR_MASK_0, + IPFS_XUSB_HOST_INTR_ENABLE_0, + IPFS_XUSB_HOST_UFPCI_CONFIG_0, + IPFS_XUSB_HOST_CLKGATE_HYSTERESIS_0, + IPFS_XUSB_HOST_MCCIF_FIFOCTRL_0, +}; + +static const unsigned int tegra124_xusb_context_fpci[] = { + XUSB_CFG_ARU_CONTEXT_HS_PLS, + XUSB_CFG_ARU_CONTEXT_FS_PLS, + XUSB_CFG_ARU_CONTEXT_HSFS_SPEED, + XUSB_CFG_ARU_CONTEXT_HSFS_PP, + XUSB_CFG_ARU_CONTEXT, + XUSB_CFG_AXI_CFG, + XUSB_CFG_24, + XUSB_CFG_16, +}; + +static const struct tegra_xusb_context_soc tegra124_xusb_context = { + .ipfs = { + .num_offsets = ARRAY_SIZE(tegra124_xusb_context_ipfs), + .offsets = tegra124_xusb_context_ipfs, + }, + .fpci = { + .num_offsets = ARRAY_SIZE(tegra124_xusb_context_fpci), + .offsets = tegra124_xusb_context_fpci, + }, +}; + static const struct tegra_xusb_soc tegra124_soc = { .firmware = "nvidia/tegra124/xusb.bin", .supply_names = tegra124_supply_names, .num_supplies = ARRAY_SIZE(tegra124_supply_names), .phy_types = tegra124_phy_types, .num_types = ARRAY_SIZE(tegra124_phy_types), + .context = &tegra124_xusb_context, .ports = { .usb2 = { .offset = 4, .count = 4, }, .hsic = { .offset = 6, .count = 2, }, @@ -1414,6 +1725,7 @@ static const struct tegra_xusb_soc tegra210_soc = { .num_supplies = ARRAY_SIZE(tegra210_supply_names), .phy_types = tegra210_phy_types, .num_types = ARRAY_SIZE(tegra210_phy_types), + .context = &tegra124_xusb_context, .ports = { .usb2 = { .offset = 4, .count = 4, }, .hsic = { .offset = 8, .count = 1, }, @@ -1432,6 +1744,7 @@ MODULE_FIRMWARE("nvidia/tegra210/xusb.bin"); static const char * const tegra186_supply_names[] = { }; +MODULE_FIRMWARE("nvidia/tegra186/xusb.bin"); static const struct tegra_xusb_phy_type tegra186_phy_types[] = { { .name = "usb3", .num = 3, }, @@ -1439,12 +1752,20 @@ static const struct tegra_xusb_phy_type tegra186_phy_types[] = { { .name = "hsic", .num = 1, }, }; +static const struct tegra_xusb_context_soc tegra186_xusb_context = { + .fpci = { + .num_offsets = ARRAY_SIZE(tegra124_xusb_context_fpci), + .offsets = tegra124_xusb_context_fpci, + }, +}; + static const struct tegra_xusb_soc tegra186_soc = { .firmware = "nvidia/tegra186/xusb.bin", .supply_names = tegra186_supply_names, .num_supplies = ARRAY_SIZE(tegra186_supply_names), .phy_types = tegra186_phy_types, .num_types = ARRAY_SIZE(tegra186_phy_types), + .context = &tegra186_xusb_context, .ports = { .usb3 = { .offset = 0, .count = 3, }, .usb2 = { .offset = 3, .count = 3, }, @@ -1474,6 +1795,7 @@ static const struct tegra_xusb_soc tegra194_soc = { .num_supplies = ARRAY_SIZE(tegra194_supply_names), .phy_types = tegra194_phy_types, .num_types = ARRAY_SIZE(tegra194_phy_types), + .context = &tegra186_xusb_context, .ports = { .usb3 = { .offset = 0, .count = 4, }, .usb2 = { .offset = 4, .count = 4, }, diff --git a/drivers/usb/misc/usb3503.c b/drivers/usb/misc/usb3503.c index 72f39a9751b5..116bd789e568 100644 --- a/drivers/usb/misc/usb3503.c +++ b/drivers/usb/misc/usb3503.c @@ -7,11 +7,10 @@ #include <linux/clk.h> #include <linux/i2c.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/delay.h> #include <linux/slab.h> #include <linux/module.h> -#include <linux/of_gpio.h> #include <linux/platform_device.h> #include <linux/platform_data/usb3503.h> #include <linux/regmap.h> @@ -47,19 +46,19 @@ struct usb3503 { struct device *dev; struct clk *clk; u8 port_off_mask; - int gpio_intn; - int gpio_reset; - int gpio_connect; + struct gpio_desc *intn; + struct gpio_desc *reset; + struct gpio_desc *connect; bool secondary_ref_clk; }; static int usb3503_reset(struct usb3503 *hub, int state) { - if (!state && gpio_is_valid(hub->gpio_connect)) - gpio_set_value_cansleep(hub->gpio_connect, 0); + if (!state && hub->connect) + gpiod_set_value_cansleep(hub->connect, 0); - if (gpio_is_valid(hub->gpio_reset)) - gpio_set_value_cansleep(hub->gpio_reset, state); + if (hub->reset) + gpiod_set_value_cansleep(hub->reset, !state); /* Wait T_HUBINIT == 4ms for hub logic to stabilize */ if (state) @@ -115,8 +114,8 @@ static int usb3503_connect(struct usb3503 *hub) } } - if (gpio_is_valid(hub->gpio_connect)) - gpio_set_value_cansleep(hub->gpio_connect, 1); + if (hub->connect) + gpiod_set_value_cansleep(hub->connect, 1); hub->mode = USB3503_MODE_HUB; dev_info(dev, "switched to HUB mode\n"); @@ -163,13 +162,11 @@ static int usb3503_probe(struct usb3503 *hub) int err; u32 mode = USB3503_MODE_HUB; const u32 *property; + enum gpiod_flags flags; int len; if (pdata) { hub->port_off_mask = pdata->port_off_mask; - hub->gpio_intn = pdata->gpio_intn; - hub->gpio_connect = pdata->gpio_connect; - hub->gpio_reset = pdata->gpio_reset; hub->mode = pdata->initial_mode; } else if (np) { u32 rate = 0; @@ -230,59 +227,38 @@ static int usb3503_probe(struct usb3503 *hub) } } - hub->gpio_intn = of_get_named_gpio(np, "intn-gpios", 0); - if (hub->gpio_intn == -EPROBE_DEFER) - return -EPROBE_DEFER; - hub->gpio_connect = of_get_named_gpio(np, "connect-gpios", 0); - if (hub->gpio_connect == -EPROBE_DEFER) - return -EPROBE_DEFER; - hub->gpio_reset = of_get_named_gpio(np, "reset-gpios", 0); - if (hub->gpio_reset == -EPROBE_DEFER) - return -EPROBE_DEFER; of_property_read_u32(np, "initial-mode", &mode); hub->mode = mode; } - if (hub->port_off_mask && !hub->regmap) - dev_err(dev, "Ports disabled with no control interface\n"); - - if (gpio_is_valid(hub->gpio_intn)) { - int val = hub->secondary_ref_clk ? GPIOF_OUT_INIT_LOW : - GPIOF_OUT_INIT_HIGH; - err = devm_gpio_request_one(dev, hub->gpio_intn, val, - "usb3503 intn"); - if (err) { - dev_err(dev, - "unable to request GPIO %d as interrupt pin (%d)\n", - hub->gpio_intn, err); - return err; - } - } - - if (gpio_is_valid(hub->gpio_connect)) { - err = devm_gpio_request_one(dev, hub->gpio_connect, - GPIOF_OUT_INIT_LOW, "usb3503 connect"); - if (err) { - dev_err(dev, - "unable to request GPIO %d as connect pin (%d)\n", - hub->gpio_connect, err); - return err; - } - } - - if (gpio_is_valid(hub->gpio_reset)) { - err = devm_gpio_request_one(dev, hub->gpio_reset, - GPIOF_OUT_INIT_LOW, "usb3503 reset"); + if (hub->secondary_ref_clk) + flags = GPIOD_OUT_LOW; + else + flags = GPIOD_OUT_HIGH; + hub->intn = devm_gpiod_get_optional(dev, "intn", flags); + if (IS_ERR(hub->intn)) + return PTR_ERR(hub->intn); + if (hub->intn) + gpiod_set_consumer_name(hub->intn, "usb3503 intn"); + + hub->connect = devm_gpiod_get_optional(dev, "connect", GPIOD_OUT_LOW); + if (IS_ERR(hub->connect)) + return PTR_ERR(hub->connect); + if (hub->connect) + gpiod_set_consumer_name(hub->connect, "usb3503 connect"); + + hub->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(hub->reset)) + return PTR_ERR(hub->reset); + if (hub->reset) { /* Datasheet defines a hardware reset to be at least 100us */ usleep_range(100, 10000); - if (err) { - dev_err(dev, - "unable to request GPIO %d as reset pin (%d)\n", - hub->gpio_reset, err); - return err; - } + gpiod_set_consumer_name(hub->reset, "usb3503 reset"); } + if (hub->port_off_mask && !hub->regmap) + dev_err(dev, "Ports disabled with no control interface\n"); + usb3503_switch_mode(hub, hub->mode); dev_info(dev, "%s: probed in %s mode\n", __func__, diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index 52f8e2b57ad5..eb2ded1026ee 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -101,7 +101,6 @@ config USB_MUSB_AM35X config USB_MUSB_DSPS tristate "TI DSPS platforms" - select USB_MUSB_AM335X_CHILD depends on ARCH_OMAP2PLUS || COMPILE_TEST depends on OF_IRQ @@ -111,13 +110,16 @@ config USB_MUSB_UX500 config USB_MUSB_JZ4740 tristate "JZ4740" - depends on NOP_USB_XCEIV depends on MIPS || COMPILE_TEST depends on USB_MUSB_GADGET depends on USB=n || USB_OTG_BLACKLIST_HUB -config USB_MUSB_AM335X_CHILD - tristate +config USB_MUSB_MEDIATEK + tristate "MediaTek platforms" + depends on ARCH_MEDIATEK || COMPILE_TEST + depends on NOP_USB_XCEIV + depends on GENERIC_PHY + select USB_ROLE_SWITCH comment "MUSB DMA mode" @@ -142,7 +144,7 @@ config USB_UX500_DMA config USB_INVENTRA_DMA bool 'Inventra' - depends on USB_MUSB_OMAP2PLUS + depends on USB_MUSB_OMAP2PLUS || USB_MUSB_MEDIATEK help Enable DMA transfers using Mentor's engine. diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile index 3a88c79e650c..932247360a9f 100644 --- a/drivers/usb/musb/Makefile +++ b/drivers/usb/musb/Makefile @@ -24,9 +24,7 @@ obj-$(CONFIG_USB_MUSB_DA8XX) += da8xx.o obj-$(CONFIG_USB_MUSB_UX500) += ux500.o obj-$(CONFIG_USB_MUSB_JZ4740) += jz4740.o obj-$(CONFIG_USB_MUSB_SUNXI) += sunxi.o - - -obj-$(CONFIG_USB_MUSB_AM335X_CHILD) += musb_am335x.o +obj-$(CONFIG_USB_MUSB_MEDIATEK) += mediatek.o # the kconfig must guarantee that only one of the # possible I/O schemes will be enabled at a time ... diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index fb6bbd254ab7..704435526394 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -13,7 +13,7 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/io.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/usb/usb_phy_generic.h> @@ -25,10 +25,6 @@ #include "musb_core.h" -#ifdef CONFIG_MACH_DAVINCI_EVM -#define GPIO_nVBUS_DRV 160 -#endif - #include "davinci.h" #include "cppi_dma.h" @@ -40,6 +36,9 @@ struct davinci_glue { struct device *dev; struct platform_device *musb; struct clk *clk; + bool vbus_state; + struct gpio_desc *vbus; + struct work_struct vbus_work; }; /* REVISIT (PM) we should be able to keep the PHY in low power mode most @@ -135,43 +134,44 @@ static void davinci_musb_disable(struct musb *musb) * when J10 is out, and TI documents it as handling OTG. */ -#ifdef CONFIG_MACH_DAVINCI_EVM - -static int vbus_state = -1; - /* I2C operations are always synchronous, and require a task context. * With unloaded systems, using the shared workqueue seems to suffice * to satisfy the 100msec A_WAIT_VRISE timeout... */ -static void evm_deferred_drvvbus(struct work_struct *ignored) +static void evm_deferred_drvvbus(struct work_struct *work) { - gpio_set_value_cansleep(GPIO_nVBUS_DRV, vbus_state); - vbus_state = !vbus_state; -} + struct davinci_glue *glue = container_of(work, struct davinci_glue, + vbus_work); -#endif /* EVM */ + gpiod_set_value_cansleep(glue->vbus, glue->vbus_state); + glue->vbus_state = !glue->vbus_state; +} -static void davinci_musb_source_power(struct musb *musb, int is_on, int immediate) +static void davinci_musb_source_power(struct musb *musb, int is_on, + int immediate) { -#ifdef CONFIG_MACH_DAVINCI_EVM + struct davinci_glue *glue = dev_get_drvdata(musb->controller->parent); + + /* This GPIO handling is entirely optional */ + if (!glue->vbus) + return; + if (is_on) is_on = 1; - if (vbus_state == is_on) + if (glue->vbus_state == is_on) return; - vbus_state = !is_on; /* 0/1 vs "-1 == unknown/init" */ + /* 0/1 vs "-1 == unknown/init" */ + glue->vbus_state = !is_on; if (machine_is_davinci_evm()) { - static DECLARE_WORK(evm_vbus_work, evm_deferred_drvvbus); - if (immediate) - gpio_set_value_cansleep(GPIO_nVBUS_DRV, vbus_state); + gpiod_set_value_cansleep(glue->vbus, glue->vbus_state); else - schedule_work(&evm_vbus_work); + schedule_work(&glue->vbus_work); } if (immediate) - vbus_state = is_on; -#endif + glue->vbus_state = is_on; } static void davinci_musb_set_vbus(struct musb *musb, int is_on) @@ -524,6 +524,15 @@ static int davinci_probe(struct platform_device *pdev) pdata->platform_ops = &davinci_ops; + glue->vbus = devm_gpiod_get_optional(&pdev->dev, NULL, GPIOD_OUT_LOW); + if (IS_ERR(glue->vbus)) { + ret = PTR_ERR(glue->vbus); + goto err0; + } else { + glue->vbus_state = -1; + INIT_WORK(&glue->vbus_work, evm_deferred_drvvbus); + } + usb_phy_generic_register(); platform_set_drvdata(pdev, glue); diff --git a/drivers/usb/musb/jz4740.c b/drivers/usb/musb/jz4740.c index e3b8c84ccdb8..bc0109f4700b 100644 --- a/drivers/usb/musb/jz4740.c +++ b/drivers/usb/musb/jz4740.c @@ -17,16 +17,15 @@ #include "musb_core.h" struct jz4740_glue { - struct device *dev; - struct platform_device *musb; + struct platform_device *pdev; struct clk *clk; }; static irqreturn_t jz4740_musb_interrupt(int irq, void *__hci) { - unsigned long flags; - irqreturn_t retval = IRQ_NONE; - struct musb *musb = __hci; + unsigned long flags; + irqreturn_t retval = IRQ_NONE; + struct musb *musb = __hci; spin_lock_irqsave(&musb->lock, flags); @@ -40,7 +39,7 @@ static irqreturn_t jz4740_musb_interrupt(int irq, void *__hci) * never see them set */ musb->int_usb &= MUSB_INTR_SUSPEND | MUSB_INTR_RESUME | - MUSB_INTR_RESET | MUSB_INTR_SOF; + MUSB_INTR_RESET | MUSB_INTR_SOF; if (musb->int_usb || musb->int_tx || musb->int_rx) retval = musb_interrupt(musb); @@ -51,25 +50,20 @@ static irqreturn_t jz4740_musb_interrupt(int irq, void *__hci) } static struct musb_fifo_cfg jz4740_musb_fifo_cfg[] = { -{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, }, -{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, }, -{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 64, }, + { .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, }, + { .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, }, + { .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 64, }, }; static const struct musb_hdrc_config jz4740_musb_config = { /* Silicon does not implement USB OTG. */ - .multipoint = 0, + .multipoint = 0, /* Max EPs scanned, driver will decide which EP can be used. */ - .num_eps = 4, + .num_eps = 4, /* RAMbits needed to configure EPs from table */ - .ram_bits = 9, - .fifo_cfg = jz4740_musb_fifo_cfg, - .fifo_cfg_size = ARRAY_SIZE(jz4740_musb_fifo_cfg), -}; - -static struct musb_hdrc_platform_data jz4740_musb_platform_data = { - .mode = MUSB_PERIPHERAL, - .config = &jz4740_musb_config, + .ram_bits = 9, + .fifo_cfg = jz4740_musb_fifo_cfg, + .fifo_cfg_size = ARRAY_SIZE(jz4740_musb_fifo_cfg), }; static int jz4740_musb_init(struct musb *musb) @@ -88,7 +82,8 @@ static int jz4740_musb_init(struct musb *musb) return err; } - /* Silicon does not implement ConfigData register. + /* + * Silicon does not implement ConfigData register. * Set dyn_fifo to avoid reading EP config from hardware. */ musb->dyn_fifo = true; @@ -108,63 +103,67 @@ static const struct musb_platform_ops jz4740_musb_ops = { .init = jz4740_musb_init, }; +static const struct musb_hdrc_platform_data jz4740_musb_pdata = { + .mode = MUSB_PERIPHERAL, + .config = &jz4740_musb_config, + .platform_ops = &jz4740_musb_ops, +}; + static int jz4740_probe(struct platform_device *pdev) { - struct musb_hdrc_platform_data *pdata = &jz4740_musb_platform_data; + struct device *dev = &pdev->dev; + const struct musb_hdrc_platform_data *pdata = &jz4740_musb_pdata; struct platform_device *musb; struct jz4740_glue *glue; - struct clk *clk; + struct clk *clk; int ret; - glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL); + glue = devm_kzalloc(dev, sizeof(*glue), GFP_KERNEL); if (!glue) return -ENOMEM; musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO); if (!musb) { - dev_err(&pdev->dev, "failed to allocate musb device\n"); + dev_err(dev, "failed to allocate musb device"); return -ENOMEM; } - clk = devm_clk_get(&pdev->dev, "udc"); + clk = devm_clk_get(dev, "udc"); if (IS_ERR(clk)) { - dev_err(&pdev->dev, "failed to get clock\n"); + dev_err(dev, "failed to get clock"); ret = PTR_ERR(clk); goto err_platform_device_put; } ret = clk_prepare_enable(clk); if (ret) { - dev_err(&pdev->dev, "failed to enable clock\n"); + dev_err(dev, "failed to enable clock"); goto err_platform_device_put; } - musb->dev.parent = &pdev->dev; + musb->dev.parent = dev; - glue->dev = &pdev->dev; - glue->musb = musb; + glue->pdev = musb; glue->clk = clk; - pdata->platform_ops = &jz4740_musb_ops; - platform_set_drvdata(pdev, glue); ret = platform_device_add_resources(musb, pdev->resource, pdev->num_resources); if (ret) { - dev_err(&pdev->dev, "failed to add resources\n"); + dev_err(dev, "failed to add resources"); goto err_clk_disable; } ret = platform_device_add_data(musb, pdata, sizeof(*pdata)); if (ret) { - dev_err(&pdev->dev, "failed to add platform_data\n"); + dev_err(dev, "failed to add platform_data"); goto err_clk_disable; } ret = platform_device_add(musb); if (ret) { - dev_err(&pdev->dev, "failed to register musb device\n"); + dev_err(dev, "failed to register musb device"); goto err_clk_disable; } @@ -179,9 +178,9 @@ err_platform_device_put: static int jz4740_remove(struct platform_device *pdev) { - struct jz4740_glue *glue = platform_get_drvdata(pdev); + struct jz4740_glue *glue = platform_get_drvdata(pdev); - platform_device_unregister(glue->musb); + platform_device_unregister(glue->pdev); clk_disable_unprepare(glue->clk); return 0; @@ -190,7 +189,7 @@ static int jz4740_remove(struct platform_device *pdev) #ifdef CONFIG_OF static const struct of_device_id jz4740_musb_of_match[] = { { .compatible = "ingenic,jz4740-musb" }, - {}, + { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, jz4740_musb_of_match); #endif diff --git a/drivers/usb/musb/mediatek.c b/drivers/usb/musb/mediatek.c new file mode 100644 index 000000000000..6b88c2f5d970 --- /dev/null +++ b/drivers/usb/musb/mediatek.c @@ -0,0 +1,582 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 MediaTek Inc. + * + * Author: + * Min Guo <min.guo@mediatek.com> + * Yonglong Wu <yonglong.wu@mediatek.com> + */ + +#include <linux/clk.h> +#include <linux/dma-mapping.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/usb/role.h> +#include <linux/usb/usb_phy_generic.h> +#include "musb_core.h" +#include "musb_dma.h" + +#define USB_L1INTS 0x00a0 +#define USB_L1INTM 0x00a4 +#define MTK_MUSB_TXFUNCADDR 0x0480 + +/* MediaTek controller toggle enable and status reg */ +#define MUSB_RXTOG 0x80 +#define MUSB_RXTOGEN 0x82 +#define MUSB_TXTOG 0x84 +#define MUSB_TXTOGEN 0x86 +#define MTK_TOGGLE_EN GENMASK(15, 0) + +#define TX_INT_STATUS BIT(0) +#define RX_INT_STATUS BIT(1) +#define USBCOM_INT_STATUS BIT(2) +#define DMA_INT_STATUS BIT(3) + +#define DMA_INTR_STATUS_MSK GENMASK(7, 0) +#define DMA_INTR_UNMASK_SET_MSK GENMASK(31, 24) + +struct mtk_glue { + struct device *dev; + struct musb *musb; + struct platform_device *musb_pdev; + struct platform_device *usb_phy; + struct phy *phy; + struct usb_phy *xceiv; + enum phy_mode phy_mode; + struct clk *main; + struct clk *mcu; + struct clk *univpll; + enum usb_role role; + struct usb_role_switch *role_sw; +}; + +static int mtk_musb_clks_get(struct mtk_glue *glue) +{ + struct device *dev = glue->dev; + + glue->main = devm_clk_get(dev, "main"); + if (IS_ERR(glue->main)) { + dev_err(dev, "fail to get main clock\n"); + return PTR_ERR(glue->main); + } + + glue->mcu = devm_clk_get(dev, "mcu"); + if (IS_ERR(glue->mcu)) { + dev_err(dev, "fail to get mcu clock\n"); + return PTR_ERR(glue->mcu); + } + + glue->univpll = devm_clk_get(dev, "univpll"); + if (IS_ERR(glue->univpll)) { + dev_err(dev, "fail to get univpll clock\n"); + return PTR_ERR(glue->univpll); + } + + return 0; +} + +static int mtk_musb_clks_enable(struct mtk_glue *glue) +{ + int ret; + + ret = clk_prepare_enable(glue->main); + if (ret) { + dev_err(glue->dev, "failed to enable main clock\n"); + goto err_main_clk; + } + + ret = clk_prepare_enable(glue->mcu); + if (ret) { + dev_err(glue->dev, "failed to enable mcu clock\n"); + goto err_mcu_clk; + } + + ret = clk_prepare_enable(glue->univpll); + if (ret) { + dev_err(glue->dev, "failed to enable univpll clock\n"); + goto err_univpll_clk; + } + + return 0; + +err_univpll_clk: + clk_disable_unprepare(glue->mcu); +err_mcu_clk: + clk_disable_unprepare(glue->main); +err_main_clk: + return ret; +} + +static void mtk_musb_clks_disable(struct mtk_glue *glue) +{ + clk_disable_unprepare(glue->univpll); + clk_disable_unprepare(glue->mcu); + clk_disable_unprepare(glue->main); +} + +static int musb_usb_role_sx_set(struct device *dev, enum usb_role role) +{ + struct mtk_glue *glue = dev_get_drvdata(dev); + struct musb *musb = glue->musb; + u8 devctl = readb(musb->mregs + MUSB_DEVCTL); + enum usb_role new_role; + + if (role == glue->role) + return 0; + + switch (role) { + case USB_ROLE_HOST: + musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; + glue->phy_mode = PHY_MODE_USB_HOST; + new_role = USB_ROLE_HOST; + if (glue->role == USB_ROLE_NONE) + phy_power_on(glue->phy); + + devctl |= MUSB_DEVCTL_SESSION; + musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); + MUSB_HST_MODE(musb); + break; + case USB_ROLE_DEVICE: + musb->xceiv->otg->state = OTG_STATE_B_IDLE; + glue->phy_mode = PHY_MODE_USB_DEVICE; + new_role = USB_ROLE_DEVICE; + devctl &= ~MUSB_DEVCTL_SESSION; + musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); + if (glue->role == USB_ROLE_NONE) + phy_power_on(glue->phy); + + MUSB_DEV_MODE(musb); + break; + case USB_ROLE_NONE: + glue->phy_mode = PHY_MODE_USB_OTG; + new_role = USB_ROLE_NONE; + devctl &= ~MUSB_DEVCTL_SESSION; + musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); + if (glue->role != USB_ROLE_NONE) + phy_power_off(glue->phy); + + break; + default: + dev_err(glue->dev, "Invalid State\n"); + return -EINVAL; + } + + glue->role = new_role; + phy_set_mode(glue->phy, glue->phy_mode); + + return 0; +} + +static enum usb_role musb_usb_role_sx_get(struct device *dev) +{ + struct mtk_glue *glue = dev_get_drvdata(dev); + + return glue->role; +} + +static int mtk_otg_switch_init(struct mtk_glue *glue) +{ + struct usb_role_switch_desc role_sx_desc = { 0 }; + + role_sx_desc.set = musb_usb_role_sx_set; + role_sx_desc.get = musb_usb_role_sx_get; + role_sx_desc.fwnode = dev_fwnode(glue->dev); + glue->role_sw = usb_role_switch_register(glue->dev, &role_sx_desc); + + return PTR_ERR_OR_ZERO(glue->role_sw); +} + +static void mtk_otg_switch_exit(struct mtk_glue *glue) +{ + return usb_role_switch_unregister(glue->role_sw); +} + +static irqreturn_t generic_interrupt(int irq, void *__hci) +{ + unsigned long flags; + irqreturn_t retval = IRQ_NONE; + struct musb *musb = __hci; + + spin_lock_irqsave(&musb->lock, flags); + musb->int_usb = musb_clearb(musb->mregs, MUSB_INTRUSB); + musb->int_rx = musb_clearw(musb->mregs, MUSB_INTRRX); + musb->int_tx = musb_clearw(musb->mregs, MUSB_INTRTX); + + if (musb->int_usb || musb->int_tx || musb->int_rx) + retval = musb_interrupt(musb); + + spin_unlock_irqrestore(&musb->lock, flags); + + return retval; +} + +static irqreturn_t mtk_musb_interrupt(int irq, void *dev_id) +{ + irqreturn_t retval = IRQ_NONE; + struct musb *musb = (struct musb *)dev_id; + u32 l1_ints; + + l1_ints = musb_readl(musb->mregs, USB_L1INTS) & + musb_readl(musb->mregs, USB_L1INTM); + + if (l1_ints & (TX_INT_STATUS | RX_INT_STATUS | USBCOM_INT_STATUS)) + retval = generic_interrupt(irq, musb); + +#if defined(CONFIG_USB_INVENTRA_DMA) + if (l1_ints & DMA_INT_STATUS) + retval = dma_controller_irq(irq, musb->dma_controller); +#endif + return retval; +} + +static u32 mtk_musb_busctl_offset(u8 epnum, u16 offset) +{ + return MTK_MUSB_TXFUNCADDR + offset + 8 * epnum; +} + +static u8 mtk_musb_clearb(void __iomem *addr, unsigned int offset) +{ + u8 data; + + /* W1C */ + data = musb_readb(addr, offset); + musb_writeb(addr, offset, data); + return data; +} + +static u16 mtk_musb_clearw(void __iomem *addr, unsigned int offset) +{ + u16 data; + + /* W1C */ + data = musb_readw(addr, offset); + musb_writew(addr, offset, data); + return data; +} + +static int mtk_musb_set_mode(struct musb *musb, u8 mode) +{ + struct device *dev = musb->controller; + struct mtk_glue *glue = dev_get_drvdata(dev->parent); + enum phy_mode new_mode; + enum usb_role new_role; + + switch (mode) { + case MUSB_HOST: + new_mode = PHY_MODE_USB_HOST; + new_role = USB_ROLE_HOST; + break; + case MUSB_PERIPHERAL: + new_mode = PHY_MODE_USB_DEVICE; + new_role = USB_ROLE_DEVICE; + break; + case MUSB_OTG: + new_mode = PHY_MODE_USB_OTG; + new_role = USB_ROLE_NONE; + break; + default: + dev_err(glue->dev, "Invalid mode request\n"); + return -EINVAL; + } + + if (glue->phy_mode == new_mode) + return 0; + + if (musb->port_mode != MUSB_OTG) { + dev_err(glue->dev, "Does not support changing modes\n"); + return -EINVAL; + } + + glue->role = new_role; + musb_usb_role_sx_set(dev, glue->role); + return 0; +} + +static int mtk_musb_init(struct musb *musb) +{ + struct device *dev = musb->controller; + struct mtk_glue *glue = dev_get_drvdata(dev->parent); + int ret; + + glue->musb = musb; + musb->phy = glue->phy; + musb->xceiv = glue->xceiv; + musb->is_host = false; + musb->isr = mtk_musb_interrupt; + + /* Set TX/RX toggle enable */ + musb_writew(musb->mregs, MUSB_TXTOGEN, MTK_TOGGLE_EN); + musb_writew(musb->mregs, MUSB_RXTOGEN, MTK_TOGGLE_EN); + + if (musb->port_mode == MUSB_OTG) { + ret = mtk_otg_switch_init(glue); + if (ret) + return ret; + } + + ret = phy_init(glue->phy); + if (ret) + goto err_phy_init; + + ret = phy_power_on(glue->phy); + if (ret) + goto err_phy_power_on; + + phy_set_mode(glue->phy, glue->phy_mode); + +#if defined(CONFIG_USB_INVENTRA_DMA) + musb_writel(musb->mregs, MUSB_HSDMA_INTR, + DMA_INTR_STATUS_MSK | DMA_INTR_UNMASK_SET_MSK); +#endif + musb_writel(musb->mregs, USB_L1INTM, TX_INT_STATUS | RX_INT_STATUS | + USBCOM_INT_STATUS | DMA_INT_STATUS); + return 0; + +err_phy_power_on: + phy_exit(glue->phy); +err_phy_init: + mtk_otg_switch_exit(glue); + return ret; +} + +static u16 mtk_musb_get_toggle(struct musb_qh *qh, int is_out) +{ + struct musb *musb = qh->hw_ep->musb; + u8 epnum = qh->hw_ep->epnum; + u16 toggle; + + toggle = musb_readw(musb->mregs, is_out ? MUSB_TXTOG : MUSB_RXTOG); + return toggle & (1 << epnum); +} + +static u16 mtk_musb_set_toggle(struct musb_qh *qh, int is_out, struct urb *urb) +{ + struct musb *musb = qh->hw_ep->musb; + u8 epnum = qh->hw_ep->epnum; + u16 value, toggle; + + toggle = usb_gettoggle(urb->dev, qh->epnum, is_out); + + if (is_out) { + value = musb_readw(musb->mregs, MUSB_TXTOG); + value |= toggle << epnum; + musb_writew(musb->mregs, MUSB_TXTOG, value); + } else { + value = musb_readw(musb->mregs, MUSB_RXTOG); + value |= toggle << epnum; + musb_writew(musb->mregs, MUSB_RXTOG, value); + } + + return 0; +} + +static int mtk_musb_exit(struct musb *musb) +{ + struct device *dev = musb->controller; + struct mtk_glue *glue = dev_get_drvdata(dev->parent); + + mtk_otg_switch_exit(glue); + phy_power_off(glue->phy); + phy_exit(glue->phy); + mtk_musb_clks_disable(glue); + + pm_runtime_put_sync(dev); + pm_runtime_disable(dev); + return 0; +} + +static const struct musb_platform_ops mtk_musb_ops = { + .quirks = MUSB_DMA_INVENTRA, + .init = mtk_musb_init, + .get_toggle = mtk_musb_get_toggle, + .set_toggle = mtk_musb_set_toggle, + .exit = mtk_musb_exit, +#ifdef CONFIG_USB_INVENTRA_DMA + .dma_init = musbhs_dma_controller_create_noirq, + .dma_exit = musbhs_dma_controller_destroy, +#endif + .clearb = mtk_musb_clearb, + .clearw = mtk_musb_clearw, + .busctl_offset = mtk_musb_busctl_offset, + .set_mode = mtk_musb_set_mode, +}; + +#define MTK_MUSB_MAX_EP_NUM 8 +#define MTK_MUSB_RAM_BITS 11 + +static struct musb_fifo_cfg mtk_musb_mode_cfg[] = { + { .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, }, + { .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, }, + { .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, }, + { .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, }, + { .hw_ep_num = 3, .style = FIFO_TX, .maxpacket = 512, }, + { .hw_ep_num = 3, .style = FIFO_RX, .maxpacket = 512, }, + { .hw_ep_num = 4, .style = FIFO_TX, .maxpacket = 512, }, + { .hw_ep_num = 4, .style = FIFO_RX, .maxpacket = 512, }, + { .hw_ep_num = 5, .style = FIFO_TX, .maxpacket = 512, }, + { .hw_ep_num = 5, .style = FIFO_RX, .maxpacket = 512, }, + { .hw_ep_num = 6, .style = FIFO_TX, .maxpacket = 1024, }, + { .hw_ep_num = 6, .style = FIFO_RX, .maxpacket = 1024, }, + { .hw_ep_num = 7, .style = FIFO_TX, .maxpacket = 512, }, + { .hw_ep_num = 7, .style = FIFO_RX, .maxpacket = 64, }, +}; + +static const struct musb_hdrc_config mtk_musb_hdrc_config = { + .fifo_cfg = mtk_musb_mode_cfg, + .fifo_cfg_size = ARRAY_SIZE(mtk_musb_mode_cfg), + .multipoint = true, + .dyn_fifo = true, + .num_eps = MTK_MUSB_MAX_EP_NUM, + .ram_bits = MTK_MUSB_RAM_BITS, +}; + +static const struct platform_device_info mtk_dev_info = { + .name = "musb-hdrc", + .id = PLATFORM_DEVID_AUTO, + .dma_mask = DMA_BIT_MASK(32), +}; + +static int mtk_musb_probe(struct platform_device *pdev) +{ + struct musb_hdrc_platform_data *pdata; + struct mtk_glue *glue; + struct platform_device_info pinfo; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + int ret = -ENOMEM; + + glue = devm_kzalloc(dev, sizeof(*glue), GFP_KERNEL); + if (!glue) + return -ENOMEM; + + glue->dev = dev; + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + ret = of_platform_populate(np, NULL, NULL, dev); + if (ret) { + dev_err(dev, "failed to create child devices at %p\n", np); + return ret; + } + + ret = mtk_musb_clks_get(glue); + if (ret) + return ret; + + pdata->config = &mtk_musb_hdrc_config; + pdata->platform_ops = &mtk_musb_ops; + pdata->mode = usb_get_dr_mode(dev); + + if (IS_ENABLED(CONFIG_USB_MUSB_HOST)) + pdata->mode = USB_DR_MODE_HOST; + else if (IS_ENABLED(CONFIG_USB_MUSB_GADGET)) + pdata->mode = USB_DR_MODE_PERIPHERAL; + + switch (pdata->mode) { + case USB_DR_MODE_HOST: + glue->phy_mode = PHY_MODE_USB_HOST; + glue->role = USB_ROLE_HOST; + break; + case USB_DR_MODE_PERIPHERAL: + glue->phy_mode = PHY_MODE_USB_DEVICE; + glue->role = USB_ROLE_DEVICE; + break; + case USB_DR_MODE_OTG: + glue->phy_mode = PHY_MODE_USB_OTG; + glue->role = USB_ROLE_NONE; + break; + default: + dev_err(&pdev->dev, "Error 'dr_mode' property\n"); + return -EINVAL; + } + + glue->phy = devm_of_phy_get_by_index(dev, np, 0); + if (IS_ERR(glue->phy)) { + dev_err(dev, "fail to getting phy %ld\n", + PTR_ERR(glue->phy)); + return PTR_ERR(glue->phy); + } + + glue->usb_phy = usb_phy_generic_register(); + if (IS_ERR(glue->usb_phy)) { + dev_err(dev, "fail to registering usb-phy %ld\n", + PTR_ERR(glue->usb_phy)); + return PTR_ERR(glue->usb_phy); + } + + glue->xceiv = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2); + if (IS_ERR(glue->xceiv)) { + dev_err(dev, "fail to getting usb-phy %d\n", ret); + ret = PTR_ERR(glue->xceiv); + goto err_unregister_usb_phy; + } + + platform_set_drvdata(pdev, glue); + pm_runtime_enable(dev); + pm_runtime_get_sync(dev); + + ret = mtk_musb_clks_enable(glue); + if (ret) + goto err_enable_clk; + + pinfo = mtk_dev_info; + pinfo.parent = dev; + pinfo.res = pdev->resource; + pinfo.num_res = pdev->num_resources; + pinfo.data = pdata; + pinfo.size_data = sizeof(*pdata); + + glue->musb_pdev = platform_device_register_full(&pinfo); + if (IS_ERR(glue->musb_pdev)) { + ret = PTR_ERR(glue->musb_pdev); + dev_err(dev, "failed to register musb device: %d\n", ret); + goto err_device_register; + } + + return 0; + +err_device_register: + mtk_musb_clks_disable(glue); +err_enable_clk: + pm_runtime_put_sync(dev); + pm_runtime_disable(dev); +err_unregister_usb_phy: + usb_phy_generic_unregister(glue->usb_phy); + return ret; +} + +static int mtk_musb_remove(struct platform_device *pdev) +{ + struct mtk_glue *glue = platform_get_drvdata(pdev); + struct platform_device *usb_phy = glue->usb_phy; + + platform_device_unregister(glue->musb_pdev); + usb_phy_generic_unregister(usb_phy); + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id mtk_musb_match[] = { + {.compatible = "mediatek,mtk-musb",}, + {}, +}; +MODULE_DEVICE_TABLE(of, mtk_musb_match); +#endif + +static struct platform_driver mtk_musb_driver = { + .probe = mtk_musb_probe, + .remove = mtk_musb_remove, + .driver = { + .name = "musb-mtk", + .of_match_table = of_match_ptr(mtk_musb_match), + }, +}; + +module_platform_driver(mtk_musb_driver); + +MODULE_DESCRIPTION("MediaTek MUSB Glue Layer"); +MODULE_AUTHOR("Min Guo <min.guo@mediatek.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/musb/musb_am335x.c b/drivers/usb/musb/musb_am335x.c deleted file mode 100644 index 5f04f8e3a640..000000000000 --- a/drivers/usb/musb/musb_am335x.c +++ /dev/null @@ -1,44 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include <linux/platform_device.h> -#include <linux/pm_runtime.h> -#include <linux/module.h> -#include <linux/of_platform.h> - -static int am335x_child_probe(struct platform_device *pdev) -{ - int ret; - - pm_runtime_enable(&pdev->dev); - - ret = of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev); - if (ret) - goto err; - - return 0; -err: - pm_runtime_disable(&pdev->dev); - return ret; -} - -static const struct of_device_id am335x_child_of_match[] = { - { .compatible = "ti,am33xx-usb" }, - { }, -}; -MODULE_DEVICE_TABLE(of, am335x_child_of_match); - -static struct platform_driver am335x_child_driver = { - .probe = am335x_child_probe, - .driver = { - .name = "am335x-usb-childs", - .of_match_table = am335x_child_of_match, - }, -}; - -static int __init am335x_child_init(void) -{ - return platform_driver_register(&am335x_child_driver); -} -module_init(am335x_child_init); - -MODULE_DESCRIPTION("AM33xx child devices"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 5ebf30bd61bd..f616fb489542 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -73,6 +73,7 @@ #include <linux/prefetch.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/iopoll.h> #include <linux/dma-mapping.h> #include <linux/usb.h> #include <linux/usb/of.h> @@ -246,7 +247,7 @@ static u32 musb_default_busctl_offset(u8 epnum, u16 offset) return 0x80 + (0x08 * epnum) + offset; } -static u8 musb_default_readb(const void __iomem *addr, unsigned offset) +static u8 musb_default_readb(void __iomem *addr, u32 offset) { u8 data = __raw_readb(addr + offset); @@ -254,13 +255,13 @@ static u8 musb_default_readb(const void __iomem *addr, unsigned offset) return data; } -static void musb_default_writeb(void __iomem *addr, unsigned offset, u8 data) +static void musb_default_writeb(void __iomem *addr, u32 offset, u8 data) { trace_musb_writeb(__builtin_return_address(0), addr, offset, data); __raw_writeb(data, addr + offset); } -static u16 musb_default_readw(const void __iomem *addr, unsigned offset) +static u16 musb_default_readw(void __iomem *addr, u32 offset) { u16 data = __raw_readw(addr + offset); @@ -268,12 +269,44 @@ static u16 musb_default_readw(const void __iomem *addr, unsigned offset) return data; } -static void musb_default_writew(void __iomem *addr, unsigned offset, u16 data) +static void musb_default_writew(void __iomem *addr, u32 offset, u16 data) { trace_musb_writew(__builtin_return_address(0), addr, offset, data); __raw_writew(data, addr + offset); } +static u16 musb_default_get_toggle(struct musb_qh *qh, int is_out) +{ + void __iomem *epio = qh->hw_ep->regs; + u16 csr; + + if (is_out) + csr = musb_readw(epio, MUSB_TXCSR) & MUSB_TXCSR_H_DATATOGGLE; + else + csr = musb_readw(epio, MUSB_RXCSR) & MUSB_RXCSR_H_DATATOGGLE; + + return csr; +} + +static u16 musb_default_set_toggle(struct musb_qh *qh, int is_out, + struct urb *urb) +{ + u16 csr; + u16 toggle; + + toggle = usb_gettoggle(urb->dev, qh->epnum, is_out); + + if (is_out) + csr = toggle ? (MUSB_TXCSR_H_WR_DATATOGGLE + | MUSB_TXCSR_H_DATATOGGLE) + : MUSB_TXCSR_CLRDATATOG; + else + csr = toggle ? (MUSB_RXCSR_H_WR_DATATOGGLE + | MUSB_RXCSR_H_DATATOGGLE) : 0; + + return csr; +} + /* * Load an endpoint's FIFO */ @@ -364,19 +397,25 @@ static void musb_default_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst) /* * Old style IO functions */ -u8 (*musb_readb)(const void __iomem *addr, unsigned offset); +u8 (*musb_readb)(void __iomem *addr, u32 offset); EXPORT_SYMBOL_GPL(musb_readb); -void (*musb_writeb)(void __iomem *addr, unsigned offset, u8 data); +void (*musb_writeb)(void __iomem *addr, u32 offset, u8 data); EXPORT_SYMBOL_GPL(musb_writeb); -u16 (*musb_readw)(const void __iomem *addr, unsigned offset); +u8 (*musb_clearb)(void __iomem *addr, u32 offset); +EXPORT_SYMBOL_GPL(musb_clearb); + +u16 (*musb_readw)(void __iomem *addr, u32 offset); EXPORT_SYMBOL_GPL(musb_readw); -void (*musb_writew)(void __iomem *addr, unsigned offset, u16 data); +void (*musb_writew)(void __iomem *addr, u32 offset, u16 data); EXPORT_SYMBOL_GPL(musb_writew); -u32 musb_readl(const void __iomem *addr, unsigned offset) +u16 (*musb_clearw)(void __iomem *addr, u32 offset); +EXPORT_SYMBOL_GPL(musb_clearw); + +u32 musb_readl(void __iomem *addr, u32 offset) { u32 data = __raw_readl(addr + offset); @@ -385,7 +424,7 @@ u32 musb_readl(const void __iomem *addr, unsigned offset) } EXPORT_SYMBOL_GPL(musb_readl); -void musb_writel(void __iomem *addr, unsigned offset, u32 data) +void musb_writel(void __iomem *addr, u32 offset, u32 data) { trace_musb_writel(__builtin_return_address(0), addr, offset, data); __raw_writel(data, addr + offset); @@ -414,6 +453,108 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src) return hw_ep->musb->io.write_fifo(hw_ep, len, src); } +static u8 musb_read_devctl(struct musb *musb) +{ + return musb_readb(musb->mregs, MUSB_DEVCTL); +} + +/** + * musb_set_host - set and initialize host mode + * @musb: musb controller driver data + * + * At least some musb revisions need to enable devctl session bit in + * peripheral mode to switch to host mode. Initializes things to host + * mode and sets A_IDLE. SoC glue needs to advance state further + * based on phy provided VBUS state. + * + * Note that the SoC glue code may need to wait for musb to settle + * on enable before calling this to avoid babble. + */ +int musb_set_host(struct musb *musb) +{ + int error = 0; + u8 devctl; + + if (!musb) + return -EINVAL; + + devctl = musb_read_devctl(musb); + if (!(devctl & MUSB_DEVCTL_BDEVICE)) { + dev_info(musb->controller, + "%s: already in host mode: %02x\n", + __func__, devctl); + goto init_data; + } + + devctl |= MUSB_DEVCTL_SESSION; + musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); + + error = readx_poll_timeout(musb_read_devctl, musb, devctl, + !(devctl & MUSB_DEVCTL_BDEVICE), 5000, + 1000000); + if (error) { + dev_err(musb->controller, "%s: could not set host: %02x\n", + __func__, devctl); + + return error; + } + +init_data: + musb->is_active = 1; + musb->xceiv->otg->state = OTG_STATE_A_IDLE; + MUSB_HST_MODE(musb); + + return error; +} +EXPORT_SYMBOL_GPL(musb_set_host); + +/** + * musb_set_peripheral - set and initialize peripheral mode + * @musb: musb controller driver data + * + * Clears devctl session bit and initializes things for peripheral + * mode and sets B_IDLE. SoC glue needs to advance state further + * based on phy provided VBUS state. + */ +int musb_set_peripheral(struct musb *musb) +{ + int error = 0; + u8 devctl; + + if (!musb) + return -EINVAL; + + devctl = musb_read_devctl(musb); + if (devctl & MUSB_DEVCTL_BDEVICE) { + dev_info(musb->controller, + "%s: already in peripheral mode: %02x\n", + __func__, devctl); + + goto init_data; + } + + devctl &= ~MUSB_DEVCTL_SESSION; + musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); + + error = readx_poll_timeout(musb_read_devctl, musb, devctl, + devctl & MUSB_DEVCTL_BDEVICE, 5000, + 1000000); + if (error) { + dev_err(musb->controller, "%s: could not set peripheral: %02x\n", + __func__, devctl); + + return error; + } + +init_data: + musb->is_active = 0; + musb->xceiv->otg->state = OTG_STATE_B_IDLE; + MUSB_DEV_MODE(musb); + + return error; +} +EXPORT_SYMBOL_GPL(musb_set_peripheral); + /*-------------------------------------------------------------------------*/ /* for high speed test mode; see USB 2.0 spec 7.1.20 */ @@ -909,7 +1050,6 @@ static void musb_handle_intr_reset(struct musb *musb) * @param musb instance pointer * @param int_usb register contents * @param devctl - * @param power */ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, @@ -1015,7 +1155,6 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, static void musb_disable_interrupts(struct musb *musb) { void __iomem *mbase = musb->mregs; - u16 temp; /* disable interrupts */ musb_writeb(mbase, MUSB_INTRUSBE, 0); @@ -1025,9 +1164,9 @@ static void musb_disable_interrupts(struct musb *musb) musb_writew(mbase, MUSB_INTRRXE, 0); /* flush pending interrupts */ - temp = musb_readb(mbase, MUSB_INTRUSB); - temp = musb_readw(mbase, MUSB_INTRTX); - temp = musb_readw(mbase, MUSB_INTRRX); + musb_clearb(mbase, MUSB_INTRUSB); + musb_clearw(mbase, MUSB_INTRTX); + musb_clearw(mbase, MUSB_INTRRX); } static void musb_enable_interrupts(struct musb *musb) @@ -2254,10 +2393,19 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) musb_readb = musb->ops->readb; if (musb->ops->writeb) musb_writeb = musb->ops->writeb; + if (musb->ops->clearb) + musb_clearb = musb->ops->clearb; + else + musb_clearb = musb_readb; + if (musb->ops->readw) musb_readw = musb->ops->readw; if (musb->ops->writew) musb_writew = musb->ops->writew; + if (musb->ops->clearw) + musb_clearw = musb->ops->clearw; + else + musb_clearw = musb_readw; #ifndef CONFIG_MUSB_PIO_ONLY if (!musb->ops->dma_init || !musb->ops->dma_exit) { @@ -2279,6 +2427,16 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) else musb->io.write_fifo = musb_default_write_fifo; + if (musb->ops->get_toggle) + musb->io.get_toggle = musb->ops->get_toggle; + else + musb->io.get_toggle = musb_default_get_toggle; + + if (musb->ops->set_toggle) + musb->io.set_toggle = musb->ops->set_toggle; + else + musb->io.set_toggle = musb_default_set_toggle; + if (!musb->xceiv->io_ops) { musb->xceiv->io_dev = musb->controller; musb->xceiv->io_priv = musb->mregs; diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 04203b7126d5..290a2bc46606 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -27,6 +27,7 @@ struct musb; struct musb_hw_ep; struct musb_ep; +struct musb_qh; /* Helper defines for struct musb->hwvers */ #define MUSB_HWVERS_MAJOR(x) ((x >> 10) & 0x1f) @@ -119,10 +120,14 @@ struct musb_io; * @fifo_offset: returns the fifo offset * @readb: read 8 bits * @writeb: write 8 bits + * @clearb: could be clear-on-readb or W1C * @readw: read 16 bits * @writew: write 16 bits + * @clearw: could be clear-on-readw or W1C * @read_fifo: reads the fifo * @write_fifo: writes to fifo + * @get_toggle: platform specific get toggle function + * @set_toggle: platform specific set toggle function * @dma_init: platform specific dma init function * @dma_exit: platform specific dma exit function * @init: turns on clocks, sets up platform-specific registers, etc @@ -161,12 +166,16 @@ struct musb_platform_ops { u16 fifo_mode; u32 (*fifo_offset)(u8 epnum); u32 (*busctl_offset)(u8 epnum, u16 offset); - u8 (*readb)(const void __iomem *addr, unsigned offset); - void (*writeb)(void __iomem *addr, unsigned offset, u8 data); - u16 (*readw)(const void __iomem *addr, unsigned offset); - void (*writew)(void __iomem *addr, unsigned offset, u16 data); + u8 (*readb)(void __iomem *addr, u32 offset); + void (*writeb)(void __iomem *addr, u32 offset, u8 data); + u8 (*clearb)(void __iomem *addr, u32 offset); + u16 (*readw)(void __iomem *addr, u32 offset); + void (*writew)(void __iomem *addr, u32 offset, u16 data); + u16 (*clearw)(void __iomem *addr, u32 offset); void (*read_fifo)(struct musb_hw_ep *hw_ep, u16 len, u8 *buf); void (*write_fifo)(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf); + u16 (*get_toggle)(struct musb_qh *qh, int is_out); + u16 (*set_toggle)(struct musb_qh *qh, int is_out, struct urb *urb); struct dma_controller * (*dma_init) (struct musb *musb, void __iomem *base); void (*dma_exit)(struct dma_controller *c); @@ -487,6 +496,9 @@ extern void musb_start(struct musb *musb); extern void musb_write_fifo(struct musb_hw_ep *ep, u16 len, const u8 *src); extern void musb_read_fifo(struct musb_hw_ep *ep, u16 len, u8 *dst); +extern int musb_set_host(struct musb *musb); +extern int musb_set_peripheral(struct musb *musb); + extern void musb_load_testpacket(struct musb *); extern irqreturn_t musb_interrupt(struct musb *); diff --git a/drivers/usb/musb/musb_dma.h b/drivers/usb/musb/musb_dma.h index 8f60271c0a9d..4b4d8dc5d3f2 100644 --- a/drivers/usb/musb/musb_dma.h +++ b/drivers/usb/musb/musb_dma.h @@ -35,6 +35,12 @@ struct musb_hw_ep; * whether shared with the Inventra core or separate. */ +#define MUSB_HSDMA_BASE 0x200 +#define MUSB_HSDMA_INTR (MUSB_HSDMA_BASE + 0) +#define MUSB_HSDMA_CONTROL 0x4 +#define MUSB_HSDMA_ADDRESS 0x8 +#define MUSB_HSDMA_COUNT 0xc + #define DMA_ADDR_INVALID (~(dma_addr_t)0) #ifdef CONFIG_MUSB_PIO_ONLY @@ -191,6 +197,9 @@ extern void (*musb_dma_controller_destroy)(struct dma_controller *); extern struct dma_controller * musbhs_dma_controller_create(struct musb *musb, void __iomem *base); extern void musbhs_dma_controller_destroy(struct dma_controller *c); +extern struct dma_controller * +musbhs_dma_controller_create_noirq(struct musb *musb, void __iomem *base); +extern irqreturn_t dma_controller_irq(int irq, void *private_data); extern struct dma_controller * tusb_dma_controller_create(struct musb *musb, void __iomem *base); diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 5a44b70372d9..886c9b602f8c 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -286,26 +286,6 @@ __acquires(musb->lock) spin_lock(&musb->lock); } -/* For bulk/interrupt endpoints only */ -static inline void musb_save_toggle(struct musb_qh *qh, int is_in, - struct urb *urb) -{ - void __iomem *epio = qh->hw_ep->regs; - u16 csr; - - /* - * FIXME: the current Mentor DMA code seems to have - * problems getting toggle correct. - */ - - if (is_in) - csr = musb_readw(epio, MUSB_RXCSR) & MUSB_RXCSR_H_DATATOGGLE; - else - csr = musb_readw(epio, MUSB_TXCSR) & MUSB_TXCSR_H_DATATOGGLE; - - usb_settoggle(urb->dev, qh->epnum, !is_in, csr ? 1 : 0); -} - /* * Advance this hardware endpoint's queue, completing the specified URB and * advancing to either the next URB queued to that qh, or else invalidating @@ -320,6 +300,7 @@ static void musb_advance_schedule(struct musb *musb, struct urb *urb, struct musb_hw_ep *ep = qh->hw_ep; int ready = qh->is_ready; int status; + u16 toggle; status = (urb->status == -EINPROGRESS) ? 0 : urb->status; @@ -327,7 +308,8 @@ static void musb_advance_schedule(struct musb *musb, struct urb *urb, switch (qh->type) { case USB_ENDPOINT_XFER_BULK: case USB_ENDPOINT_XFER_INT: - musb_save_toggle(qh, is_in, urb); + toggle = musb->io.get_toggle(qh, !is_in); + usb_settoggle(urb->dev, qh->epnum, !is_in, toggle ? 1 : 0); break; case USB_ENDPOINT_XFER_ISOC: if (status == 0 && urb->error_count) @@ -772,13 +754,8 @@ static void musb_ep_program(struct musb *musb, u8 epnum, ); csr |= MUSB_TXCSR_MODE; - if (!hw_ep->tx_double_buffered) { - if (usb_gettoggle(urb->dev, qh->epnum, 1)) - csr |= MUSB_TXCSR_H_WR_DATATOGGLE - | MUSB_TXCSR_H_DATATOGGLE; - else - csr |= MUSB_TXCSR_CLRDATATOG; - } + if (!hw_ep->tx_double_buffered) + csr |= musb->io.set_toggle(qh, is_out, urb); musb_writew(epio, MUSB_TXCSR, csr); /* REVISIT may need to clear FLUSHFIFO ... */ @@ -860,17 +837,12 @@ finish: /* IN/receive */ } else { - u16 csr; + u16 csr = 0; if (hw_ep->rx_reinit) { musb_rx_reinit(musb, qh, epnum); + csr |= musb->io.set_toggle(qh, is_out, urb); - /* init new state: toggle and NYET, maybe DMA later */ - if (usb_gettoggle(urb->dev, qh->epnum, 0)) - csr = MUSB_RXCSR_H_WR_DATATOGGLE - | MUSB_RXCSR_H_DATATOGGLE; - else - csr = 0; if (qh->type == USB_ENDPOINT_XFER_INT) csr |= MUSB_RXCSR_DISNYET; @@ -933,6 +905,7 @@ static void musb_bulk_nak_timeout(struct musb *musb, struct musb_hw_ep *ep, void __iomem *epio = ep->regs; struct musb_qh *cur_qh, *next_qh; u16 rx_csr, tx_csr; + u16 toggle; musb_ep_select(mbase, ep->epnum); if (is_in) { @@ -970,7 +943,8 @@ static void musb_bulk_nak_timeout(struct musb *musb, struct musb_hw_ep *ep, urb->actual_length += dma->actual_len; dma->actual_len = 0L; } - musb_save_toggle(cur_qh, is_in, urb); + toggle = musb->io.get_toggle(cur_qh, !is_in); + usb_settoggle(urb->dev, cur_qh->epnum, !is_in, toggle ? 1 : 0); if (is_in) { /* move cur_qh to end of queue */ diff --git a/drivers/usb/musb/musb_io.h b/drivers/usb/musb/musb_io.h index 8058a58092cf..f17aabd95a50 100644 --- a/drivers/usb/musb/musb_io.h +++ b/drivers/usb/musb/musb_io.h @@ -22,6 +22,8 @@ * @read_fifo: platform specific function to read fifo * @write_fifo: platform specific function to write fifo * @busctl_offset: platform specific function to get busctl offset + * @get_toggle: platform specific function to get toggle + * @set_toggle: platform specific function to set toggle */ struct musb_io { u32 (*ep_offset)(u8 epnum, u16 offset); @@ -30,14 +32,18 @@ struct musb_io { void (*read_fifo)(struct musb_hw_ep *hw_ep, u16 len, u8 *buf); void (*write_fifo)(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf); u32 (*busctl_offset)(u8 epnum, u16 offset); + u16 (*get_toggle)(struct musb_qh *qh, int is_out); + u16 (*set_toggle)(struct musb_qh *qh, int is_out, struct urb *urb); }; /* Do not add new entries here, add them the struct musb_io instead */ -extern u8 (*musb_readb)(const void __iomem *addr, unsigned offset); -extern void (*musb_writeb)(void __iomem *addr, unsigned offset, u8 data); -extern u16 (*musb_readw)(const void __iomem *addr, unsigned offset); -extern void (*musb_writew)(void __iomem *addr, unsigned offset, u16 data); -extern u32 musb_readl(const void __iomem *addr, unsigned offset); -extern void musb_writel(void __iomem *addr, unsigned offset, u32 data); +extern u8 (*musb_readb)(void __iomem *addr, u32 offset); +extern void (*musb_writeb)(void __iomem *addr, u32 offset, u8 data); +extern u8 (*musb_clearb)(void __iomem *addr, u32 offset); +extern u16 (*musb_readw)(void __iomem *addr, u32 offset); +extern void (*musb_writew)(void __iomem *addr, u32 offset, u16 data); +extern u16 (*musb_clearw)(void __iomem *addr, u32 offset); +extern u32 musb_readl(void __iomem *addr, u32 offset); +extern void musb_writel(void __iomem *addr, u32 offset, u32 data); #endif diff --git a/drivers/usb/musb/musb_trace.h b/drivers/usb/musb/musb_trace.h index a97d618fe8ff..b193daf69685 100644 --- a/drivers/usb/musb/musb_trace.h +++ b/drivers/usb/musb/musb_trace.h @@ -38,11 +38,12 @@ TRACE_EVENT(musb_log, ); DECLARE_EVENT_CLASS(musb_regb, - TP_PROTO(void *caller, const void *addr, unsigned int offset, u8 data), + TP_PROTO(void *caller, const void __iomem *addr, + unsigned int offset, u8 data), TP_ARGS(caller, addr, offset, data), TP_STRUCT__entry( __field(void *, caller) - __field(const void *, addr) + __field(const void __iomem *, addr) __field(unsigned int, offset) __field(u8, data) ), @@ -57,21 +58,24 @@ DECLARE_EVENT_CLASS(musb_regb, ); DEFINE_EVENT(musb_regb, musb_readb, - TP_PROTO(void *caller, const void *addr, unsigned int offset, u8 data), + TP_PROTO(void *caller, const void __iomem *addr, + unsigned int offset, u8 data), TP_ARGS(caller, addr, offset, data) ); DEFINE_EVENT(musb_regb, musb_writeb, - TP_PROTO(void *caller, const void *addr, unsigned int offset, u8 data), + TP_PROTO(void *caller, const void __iomem *addr, + unsigned int offset, u8 data), TP_ARGS(caller, addr, offset, data) ); DECLARE_EVENT_CLASS(musb_regw, - TP_PROTO(void *caller, const void *addr, unsigned int offset, u16 data), + TP_PROTO(void *caller, const void __iomem *addr, + unsigned int offset, u16 data), TP_ARGS(caller, addr, offset, data), TP_STRUCT__entry( __field(void *, caller) - __field(const void *, addr) + __field(const void __iomem *, addr) __field(unsigned int, offset) __field(u16, data) ), @@ -86,21 +90,24 @@ DECLARE_EVENT_CLASS(musb_regw, ); DEFINE_EVENT(musb_regw, musb_readw, - TP_PROTO(void *caller, const void *addr, unsigned int offset, u16 data), + TP_PROTO(void *caller, const void __iomem *addr, + unsigned int offset, u16 data), TP_ARGS(caller, addr, offset, data) ); DEFINE_EVENT(musb_regw, musb_writew, - TP_PROTO(void *caller, const void *addr, unsigned int offset, u16 data), + TP_PROTO(void *caller, const void __iomem *addr, + unsigned int offset, u16 data), TP_ARGS(caller, addr, offset, data) ); DECLARE_EVENT_CLASS(musb_regl, - TP_PROTO(void *caller, const void *addr, unsigned int offset, u32 data), + TP_PROTO(void *caller, const void __iomem *addr, + unsigned int offset, u32 data), TP_ARGS(caller, addr, offset, data), TP_STRUCT__entry( __field(void *, caller) - __field(const void *, addr) + __field(const void __iomem *, addr) __field(unsigned int, offset) __field(u32, data) ), @@ -115,12 +122,14 @@ DECLARE_EVENT_CLASS(musb_regl, ); DEFINE_EVENT(musb_regl, musb_readl, - TP_PROTO(void *caller, const void *addr, unsigned int offset, u32 data), + TP_PROTO(void *caller, const void __iomem *addr, + unsigned int offset, u32 data), TP_ARGS(caller, addr, offset, data) ); DEFINE_EVENT(musb_regl, musb_writel, - TP_PROTO(void *caller, const void *addr, unsigned int offset, u32 data), + TP_PROTO(void *caller, const void __iomem *addr, + unsigned int offset, u32 data), TP_ARGS(caller, addr, offset, data) ); diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c index 2d3751d885b4..0aacfc8be5a1 100644 --- a/drivers/usb/musb/musbhsdma.c +++ b/drivers/usb/musb/musbhsdma.c @@ -10,12 +10,7 @@ #include <linux/platform_device.h> #include <linux/slab.h> #include "musb_core.h" - -#define MUSB_HSDMA_BASE 0x200 -#define MUSB_HSDMA_INTR (MUSB_HSDMA_BASE + 0) -#define MUSB_HSDMA_CONTROL 0x4 -#define MUSB_HSDMA_ADDRESS 0x8 -#define MUSB_HSDMA_COUNT 0xc +#include "musb_dma.h" #define MUSB_HSDMA_CHANNEL_OFFSET(_bchannel, _offset) \ (MUSB_HSDMA_BASE + (_bchannel << 4) + _offset) @@ -268,7 +263,7 @@ static int dma_channel_abort(struct dma_channel *channel) return 0; } -static irqreturn_t dma_controller_irq(int irq, void *private_data) +irqreturn_t dma_controller_irq(int irq, void *private_data) { struct musb_dma_controller *controller = private_data; struct musb *musb = controller->private_data; @@ -289,7 +284,7 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data) spin_lock_irqsave(&musb->lock, flags); - int_hsdma = musb_readb(mbase, MUSB_HSDMA_INTR); + int_hsdma = musb_clearb(mbase, MUSB_HSDMA_INTR); if (!int_hsdma) { musb_dbg(musb, "spurious DMA irq"); @@ -383,6 +378,7 @@ done: spin_unlock_irqrestore(&musb->lock, flags); return retval; } +EXPORT_SYMBOL_GPL(dma_controller_irq); void musbhs_dma_controller_destroy(struct dma_controller *c) { @@ -398,18 +394,10 @@ void musbhs_dma_controller_destroy(struct dma_controller *c) } EXPORT_SYMBOL_GPL(musbhs_dma_controller_destroy); -struct dma_controller *musbhs_dma_controller_create(struct musb *musb, - void __iomem *base) +static struct musb_dma_controller * +dma_controller_alloc(struct musb *musb, void __iomem *base) { struct musb_dma_controller *controller; - struct device *dev = musb->controller; - struct platform_device *pdev = to_platform_device(dev); - int irq = platform_get_irq_byname(pdev, "dma"); - - if (irq <= 0) { - dev_err(dev, "No DMA interrupt line!\n"); - return NULL; - } controller = kzalloc(sizeof(*controller), GFP_KERNEL); if (!controller) @@ -423,6 +411,25 @@ struct dma_controller *musbhs_dma_controller_create(struct musb *musb, controller->controller.channel_release = dma_channel_release; controller->controller.channel_program = dma_channel_program; controller->controller.channel_abort = dma_channel_abort; + return controller; +} + +struct dma_controller * +musbhs_dma_controller_create(struct musb *musb, void __iomem *base) +{ + struct musb_dma_controller *controller; + struct device *dev = musb->controller; + struct platform_device *pdev = to_platform_device(dev); + int irq = platform_get_irq_byname(pdev, "dma"); + + if (irq <= 0) { + dev_err(dev, "No DMA interrupt line!\n"); + return NULL; + } + + controller = dma_controller_alloc(musb, base); + if (!controller) + return NULL; if (request_irq(irq, dma_controller_irq, 0, dev_name(musb->controller), controller)) { @@ -437,3 +444,16 @@ struct dma_controller *musbhs_dma_controller_create(struct musb *musb, return &controller->controller; } EXPORT_SYMBOL_GPL(musbhs_dma_controller_create); + +struct dma_controller * +musbhs_dma_controller_create_noirq(struct musb *musb, void __iomem *base) +{ + struct musb_dma_controller *controller; + + controller = dma_controller_alloc(musb, base); + if (!controller) + return NULL; + + return &controller->controller; +} +EXPORT_SYMBOL_GPL(musbhs_dma_controller_create_noirq); diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index a3d2fef67746..d62c78b97cad 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -38,69 +38,6 @@ struct omap2430_glue { static struct omap2430_glue *_glue; -static void omap2430_musb_set_vbus(struct musb *musb, int is_on) -{ - struct usb_otg *otg = musb->xceiv->otg; - u8 devctl; - unsigned long timeout = jiffies + msecs_to_jiffies(1000); - /* HDRC controls CPEN, but beware current surges during device - * connect. They can trigger transient overcurrent conditions - * that must be ignored. - */ - - devctl = musb_readb(musb->mregs, MUSB_DEVCTL); - - if (is_on) { - if (musb->xceiv->otg->state == OTG_STATE_A_IDLE) { - int loops = 100; - /* start the session */ - devctl |= MUSB_DEVCTL_SESSION; - musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); - /* - * Wait for the musb to set as A device to enable the - * VBUS - */ - while (musb_readb(musb->mregs, MUSB_DEVCTL) & - MUSB_DEVCTL_BDEVICE) { - - mdelay(5); - cpu_relax(); - - if (time_after(jiffies, timeout) - || loops-- <= 0) { - dev_err(musb->controller, - "configured as A device timeout"); - break; - } - } - - otg_set_vbus(otg, 1); - } else { - musb->is_active = 1; - musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; - devctl |= MUSB_DEVCTL_SESSION; - MUSB_HST_MODE(musb); - } - } else { - musb->is_active = 0; - - /* NOTE: we're skipping A_WAIT_VFALL -> A_IDLE and - * jumping right to B_IDLE... - */ - - musb->xceiv->otg->state = OTG_STATE_B_IDLE; - devctl &= ~MUSB_DEVCTL_SESSION; - - MUSB_DEV_MODE(musb); - } - musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); - - dev_dbg(musb->controller, "VBUS %s, devctl %02x " - /* otg %3x conf %08x prcm %08x */ "\n", - usb_otg_state_string(musb->xceiv->otg->state), - musb_readb(musb->mregs, MUSB_DEVCTL)); -} - static inline void omap2430_low_level_exit(struct musb *musb) { u32 l; @@ -140,24 +77,52 @@ static int omap2430_musb_mailbox(enum musb_vbus_id_status status) return 0; } +/* + * HDRC controls CPEN, but beware current surges during device connect. + * They can trigger transient overcurrent conditions that must be ignored. + * + * Note that we're skipping A_WAIT_VFALL -> A_IDLE and jumping right to B_IDLE + * as set by musb_set_peripheral(). + */ static void omap_musb_set_mailbox(struct omap2430_glue *glue) { struct musb *musb = glue_to_musb(glue); - struct musb_hdrc_platform_data *pdata = - dev_get_platdata(musb->controller); - struct omap_musb_board_data *data = pdata->board_data; + int error; pm_runtime_get_sync(musb->controller); + + dev_dbg(musb->controller, "VBUS %s, devctl %02x\n", + usb_otg_state_string(musb->xceiv->otg->state), + musb_readb(musb->mregs, MUSB_DEVCTL)); + switch (glue->status) { case MUSB_ID_GROUND: dev_dbg(musb->controller, "ID GND\n"); - - musb->xceiv->otg->state = OTG_STATE_A_IDLE; - musb->xceiv->last_event = USB_EVENT_ID; - if (musb->gadget_driver) { - omap_control_usb_set_mode(glue->control_otghs, - USB_MODE_HOST); - omap2430_musb_set_vbus(musb, 1); + switch (musb->xceiv->otg->state) { + case OTG_STATE_A_IDLE: + error = musb_set_host(musb); + if (error) + break; + musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; + /* Fall through */ + case OTG_STATE_A_WAIT_VRISE: + case OTG_STATE_A_WAIT_BCON: + case OTG_STATE_A_HOST: + /* + * On multiple ID ground interrupts just keep enabling + * VBUS. At least cpcap VBUS shuts down otherwise. + */ + otg_set_vbus(musb->xceiv->otg, 1); + break; + default: + musb->xceiv->otg->state = OTG_STATE_A_IDLE; + musb->xceiv->last_event = USB_EVENT_ID; + if (musb->gadget_driver) { + omap_control_usb_set_mode(glue->control_otghs, + USB_MODE_HOST); + otg_set_vbus(musb->xceiv->otg, 1); + } + break; } break; @@ -174,12 +139,8 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue) dev_dbg(musb->controller, "VBUS Disconnect\n"); musb->xceiv->last_event = USB_EVENT_NONE; - if (musb->gadget_driver) - omap2430_musb_set_vbus(musb, 0); - - if (data->interface_type == MUSB_INTERFACE_UTMI) - otg_set_vbus(musb->xceiv->otg, 0); - + musb_set_peripheral(musb); + otg_set_vbus(musb->xceiv->otg, 0); omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DISCONNECT); break; @@ -226,7 +187,6 @@ static int omap2430_musb_init(struct musb *musb) u32 l; int status = 0; struct device *dev = musb->controller; - struct omap2430_glue *glue = dev_get_drvdata(dev->parent); struct musb_hdrc_platform_data *plat = dev_get_platdata(dev); struct omap_musb_board_data *data = plat->board_data; @@ -282,50 +242,17 @@ static int omap2430_musb_init(struct musb *musb) musb_readl(musb->mregs, OTG_INTERFSEL), musb_readl(musb->mregs, OTG_SIMENABLE)); - if (glue->status != MUSB_UNKNOWN) - omap_musb_set_mailbox(glue); - return 0; } static void omap2430_musb_enable(struct musb *musb) { - u8 devctl; - unsigned long timeout = jiffies + msecs_to_jiffies(1000); struct device *dev = musb->controller; struct omap2430_glue *glue = dev_get_drvdata(dev->parent); - struct musb_hdrc_platform_data *pdata = dev_get_platdata(dev); - struct omap_musb_board_data *data = pdata->board_data; - - - switch (glue->status) { - - case MUSB_ID_GROUND: - omap_control_usb_set_mode(glue->control_otghs, USB_MODE_HOST); - if (data->interface_type != MUSB_INTERFACE_UTMI) - break; - devctl = musb_readb(musb->mregs, MUSB_DEVCTL); - /* start the session */ - devctl |= MUSB_DEVCTL_SESSION; - musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); - while (musb_readb(musb->mregs, MUSB_DEVCTL) & - MUSB_DEVCTL_BDEVICE) { - cpu_relax(); - - if (time_after(jiffies, timeout)) { - dev_err(dev, "configured as A device timeout"); - break; - } - } - break; - case MUSB_VBUS_VALID: - omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE); - break; - - default: - break; - } + if (glue->status == MUSB_UNKNOWN) + glue->status = MUSB_VBUS_OFF; + omap_musb_set_mailbox(glue); } static void omap2430_musb_disable(struct musb *musb) @@ -361,8 +288,6 @@ static const struct musb_platform_ops omap2430_ops = { .init = omap2430_musb_init, .exit = omap2430_musb_exit, - .set_vbus = omap2430_musb_set_vbus, - .enable = omap2430_musb_enable, .disable = omap2430_musb_disable, @@ -552,6 +477,9 @@ static int omap2430_runtime_resume(struct device *dev) musb_writel(musb->mregs, OTG_INTERFSEL, musb->context.otg_interfsel); + /* Wait for musb to get oriented. Otherwise we can get babble */ + usleep_range(200000, 250000); + return 0; } diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c index 832a41f9ee7d..f3f76f2ac63f 100644 --- a/drivers/usb/musb/sunxi.c +++ b/drivers/usb/musb/sunxi.c @@ -407,7 +407,7 @@ static u32 sunxi_musb_busctl_offset(u8 epnum, u16 offset) return SUNXI_MUSB_TXFUNCADDR + offset; } -static u8 sunxi_musb_readb(const void __iomem *addr, unsigned offset) +static u8 sunxi_musb_readb(void __iomem *addr, u32 offset) { struct sunxi_glue *glue; @@ -520,7 +520,7 @@ static void sunxi_musb_writeb(void __iomem *addr, unsigned offset, u8 data) (int)(addr - sunxi_musb->mregs)); } -static u16 sunxi_musb_readw(const void __iomem *addr, unsigned offset) +static u16 sunxi_musb_readw(void __iomem *addr, u32 offset) { if (addr == sunxi_musb->mregs) { /* generic control or fifo control reg access */ @@ -781,6 +781,8 @@ static int sunxi_musb_probe(struct platform_device *pdev) pinfo.name = "musb-hdrc"; pinfo.id = PLATFORM_DEVID_AUTO; pinfo.parent = &pdev->dev; + pinfo.fwnode = of_fwnode_handle(pdev->dev.of_node); + pinfo.of_node_reused = true; pinfo.res = pdev->resource; pinfo.num_res = pdev->num_resources; pinfo.data = &pdata; diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index 39453287b5c3..5d449089e3ad 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -142,7 +142,7 @@ static void tusb_ep_select(void __iomem *mbase, u8 epnum) /* * TUSB6010 doesn't allow 8-bit access; 16-bit access is the minimum. */ -static u8 tusb_readb(const void __iomem *addr, unsigned offset) +static u8 tusb_readb(void __iomem *addr, u32 offset) { u16 tmp; u8 val; diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c index d19bb3e89da6..d5cf5e8bb1ca 100644 --- a/drivers/usb/musb/ux500_dma.c +++ b/drivers/usb/musb/ux500_dma.c @@ -310,9 +310,9 @@ static int ux500_dma_controller_start(struct ux500_dma_controller *controller) dma_channel->max_len = SZ_16M; ux500_channel->dma_chan = - dma_request_slave_channel(dev, chan_names[ch_num]); + dma_request_chan(dev, chan_names[ch_num]); - if (!ux500_channel->dma_chan) + if (IS_ERR(ux500_channel->dma_chan)) ux500_channel->dma_chan = dma_request_channel(mask, data ? diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 24b4f091acb8..ff24fca0a2d9 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -162,7 +162,7 @@ config USB_MXS_PHY config USB_TEGRA_PHY tristate "NVIDIA Tegra USB PHY Driver" - depends on ARCH_TEGRA + depends on ARCH_TEGRA || COMPILE_TEST select USB_COMMON select USB_PHY select USB_ULPI @@ -172,7 +172,7 @@ config USB_TEGRA_PHY config USB_ULPI bool "Generic ULPI Transceiver Driver" - depends on ARM || ARM64 + depends on ARM || ARM64 || COMPILE_TEST select USB_ULPI_VIEWPORT help Enable this to support ULPI connected USB OTG transceivers which diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c index 4bb4b1d42f32..20c0f082bf9c 100644 --- a/drivers/usb/phy/phy-ab8500-usb.c +++ b/drivers/usb/phy/phy-ab8500-usb.c @@ -108,7 +108,8 @@ enum ab8500_usb_mode { USB_IDLE = 0, USB_PERIPHERAL, USB_HOST, - USB_DEDICATED_CHG + USB_DEDICATED_CHG, + USB_UART }; /* Register USB_LINK_STATUS interrupt */ @@ -393,6 +394,24 @@ static int ab8505_usb_link_status_update(struct ab8500_usb *ab, usb_phy_set_event(&ab->phy, USB_EVENT_CHARGER); break; + /* + * FIXME: For now we rely on the boot firmware to set up the necessary + * PHY/pin configuration for UART mode. + * + * AB8505 does not seem to report any status change for UART cables, + * possibly because it cannot detect them autonomously. + * We may need to measure the ID resistance manually to reliably + * detect UART cables after bootup. + */ + case USB_LINK_SAMSUNG_UART_CBL_PHY_EN_8505: + case USB_LINK_SAMSUNG_UART_CBL_PHY_DISB_8505: + if (ab->mode == USB_IDLE) { + ab->mode = USB_UART; + ab8500_usb_peri_phy_en(ab); + } + + break; + default: break; } @@ -566,6 +585,11 @@ static irqreturn_t ab8500_usb_disconnect_irq(int irq, void *data) ab->vbus_draw = 0; } + if (ab->mode == USB_UART) { + ab8500_usb_peri_phy_dis(ab); + ab->mode = USB_IDLE; + } + if (is_ab8500_2p0(ab->ab8500)) { if (ab->mode == USB_DEDICATED_CHG) { ab8500_usb_wd_linkstatus(ab, diff --git a/drivers/usb/phy/phy-am335x.c b/drivers/usb/phy/phy-am335x.c index f5f0568d8533..8524475d942d 100644 --- a/drivers/usb/phy/phy-am335x.c +++ b/drivers/usb/phy/phy-am335x.c @@ -57,7 +57,7 @@ static int am335x_phy_probe(struct platform_device *pdev) am_phy->dr_mode = of_usb_get_dr_mode_by_phy(pdev->dev.of_node, -1); - ret = usb_phy_gen_create_phy(dev, &am_phy->usb_phy_gen, NULL); + ret = usb_phy_gen_create_phy(dev, &am_phy->usb_phy_gen); if (ret) return ret; diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c index a53b89be5324..661a229c105d 100644 --- a/drivers/usb/phy/phy-generic.c +++ b/drivers/usb/phy/phy-generic.c @@ -21,8 +21,7 @@ #include <linux/clk.h> #include <linux/regulator/consumer.h> #include <linux/of.h> -#include <linux/of_gpio.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/delay.h> #include "phy-generic.h" @@ -204,8 +203,7 @@ static int nop_set_host(struct usb_otg *otg, struct usb_bus *host) return 0; } -int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop, - struct usb_phy_generic_platform_data *pdata) +int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop) { enum usb_phy_type type = USB_PHY_TYPE_USB2; int err = 0; @@ -221,28 +219,15 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop, needs_vcc = of_property_read_bool(node, "vcc-supply"); needs_clk = of_property_read_bool(node, "clocks"); - nop->gpiod_reset = devm_gpiod_get_optional(dev, "reset", - GPIOD_ASIS); - err = PTR_ERR_OR_ZERO(nop->gpiod_reset); - if (!err) { - nop->gpiod_vbus = devm_gpiod_get_optional(dev, - "vbus-detect", - GPIOD_ASIS); - err = PTR_ERR_OR_ZERO(nop->gpiod_vbus); - } - } else if (pdata) { - type = pdata->type; - clk_rate = pdata->clk_rate; - needs_vcc = pdata->needs_vcc; - if (gpio_is_valid(pdata->gpio_reset)) { - err = devm_gpio_request_one(dev, pdata->gpio_reset, - GPIOF_ACTIVE_LOW, - dev_name(dev)); - if (!err) - nop->gpiod_reset = - gpio_to_desc(pdata->gpio_reset); - } - nop->gpiod_vbus = pdata->gpiod_vbus; + } + nop->gpiod_reset = devm_gpiod_get_optional(dev, "reset", + GPIOD_ASIS); + err = PTR_ERR_OR_ZERO(nop->gpiod_reset); + if (!err) { + nop->gpiod_vbus = devm_gpiod_get_optional(dev, + "vbus-detect", + GPIOD_ASIS); + err = PTR_ERR_OR_ZERO(nop->gpiod_vbus); } if (err == -EPROBE_DEFER) @@ -308,7 +293,7 @@ static int usb_phy_generic_probe(struct platform_device *pdev) if (!nop) return -ENOMEM; - err = usb_phy_gen_create_phy(dev, nop, dev_get_platdata(&pdev->dev)); + err = usb_phy_gen_create_phy(dev, nop); if (err) return err; if (nop->gpiod_vbus) { diff --git a/drivers/usb/phy/phy-generic.h b/drivers/usb/phy/phy-generic.h index 97289627561d..7ee80211a688 100644 --- a/drivers/usb/phy/phy-generic.h +++ b/drivers/usb/phy/phy-generic.h @@ -22,7 +22,6 @@ struct usb_phy_generic { int usb_gen_phy_init(struct usb_phy *phy); void usb_gen_phy_shutdown(struct usb_phy *phy); -int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop, - struct usb_phy_generic_platform_data *pdata); +int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop); #endif diff --git a/drivers/usb/phy/phy-gpio-vbus-usb.c b/drivers/usb/phy/phy-gpio-vbus-usb.c index 553e2573c74f..f13f5530746c 100644 --- a/drivers/usb/phy/phy-gpio-vbus-usb.c +++ b/drivers/usb/phy/phy-gpio-vbus-usb.c @@ -7,7 +7,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/module.h> #include <linux/slab.h> #include <linux/interrupt.h> @@ -17,7 +17,6 @@ #include <linux/regulator/consumer.h> #include <linux/usb/gadget.h> -#include <linux/usb/gpio_vbus.h> #include <linux/usb/otg.h> @@ -29,6 +28,8 @@ * Needs to be loaded before the UDC driver that will use it. */ struct gpio_vbus_data { + struct gpio_desc *vbus_gpiod; + struct gpio_desc *pullup_gpiod; struct usb_phy phy; struct device *dev; struct regulator *vbus_draw; @@ -83,38 +84,30 @@ static void set_vbus_draw(struct gpio_vbus_data *gpio_vbus, unsigned mA) gpio_vbus->mA = mA; } -static int is_vbus_powered(struct gpio_vbus_mach_info *pdata) +static int is_vbus_powered(struct gpio_vbus_data *gpio_vbus) { - int vbus; - - vbus = gpio_get_value(pdata->gpio_vbus); - if (pdata->gpio_vbus_inverted) - vbus = !vbus; - - return vbus; + return gpiod_get_value(gpio_vbus->vbus_gpiod); } static void gpio_vbus_work(struct work_struct *work) { struct gpio_vbus_data *gpio_vbus = container_of(work, struct gpio_vbus_data, work.work); - struct gpio_vbus_mach_info *pdata = dev_get_platdata(gpio_vbus->dev); - int gpio, status, vbus; + int status, vbus; if (!gpio_vbus->phy.otg->gadget) return; - vbus = is_vbus_powered(pdata); + vbus = is_vbus_powered(gpio_vbus); if ((vbus ^ gpio_vbus->vbus) == 0) return; gpio_vbus->vbus = vbus; /* Peripheral controllers which manage the pullup themselves won't have - * gpio_pullup configured here. If it's configured here, we'll do what - * isp1301_omap::b_peripheral() does and enable the pullup here... although - * that may complicate usb_gadget_{,dis}connect() support. + * a pullup GPIO configured here. If it's configured here, we'll do + * what isp1301_omap::b_peripheral() does and enable the pullup here... + * although that may complicate usb_gadget_{,dis}connect() support. */ - gpio = pdata->gpio_pullup; if (vbus) { status = USB_EVENT_VBUS; @@ -126,16 +119,16 @@ static void gpio_vbus_work(struct work_struct *work) set_vbus_draw(gpio_vbus, 100); /* optionally enable D+ pullup */ - if (gpio_is_valid(gpio)) - gpio_set_value(gpio, !pdata->gpio_pullup_inverted); + if (gpio_vbus->pullup_gpiod) + gpiod_set_value(gpio_vbus->pullup_gpiod, 1); atomic_notifier_call_chain(&gpio_vbus->phy.notifier, status, gpio_vbus->phy.otg->gadget); usb_phy_set_event(&gpio_vbus->phy, USB_EVENT_ENUMERATED); } else { /* optionally disable D+ pullup */ - if (gpio_is_valid(gpio)) - gpio_set_value(gpio, pdata->gpio_pullup_inverted); + if (gpio_vbus->pullup_gpiod) + gpiod_set_value(gpio_vbus->pullup_gpiod, 0); set_vbus_draw(gpio_vbus, 0); @@ -154,12 +147,11 @@ static void gpio_vbus_work(struct work_struct *work) static irqreturn_t gpio_vbus_irq(int irq, void *data) { struct platform_device *pdev = data; - struct gpio_vbus_mach_info *pdata = dev_get_platdata(&pdev->dev); struct gpio_vbus_data *gpio_vbus = platform_get_drvdata(pdev); struct usb_otg *otg = gpio_vbus->phy.otg; dev_dbg(&pdev->dev, "VBUS %s (gadget: %s)\n", - is_vbus_powered(pdata) ? "supplied" : "inactive", + is_vbus_powered(gpio_vbus) ? "supplied" : "inactive", otg->gadget ? otg->gadget->name : "none"); if (otg->gadget) @@ -175,22 +167,18 @@ static int gpio_vbus_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget) { struct gpio_vbus_data *gpio_vbus; - struct gpio_vbus_mach_info *pdata; struct platform_device *pdev; - int gpio; gpio_vbus = container_of(otg->usb_phy, struct gpio_vbus_data, phy); pdev = to_platform_device(gpio_vbus->dev); - pdata = dev_get_platdata(gpio_vbus->dev); - gpio = pdata->gpio_pullup; if (!gadget) { dev_dbg(&pdev->dev, "unregistering gadget '%s'\n", otg->gadget->name); /* optionally disable D+ pullup */ - if (gpio_is_valid(gpio)) - gpio_set_value(gpio, pdata->gpio_pullup_inverted); + if (gpio_vbus->pullup_gpiod) + gpiod_set_value(gpio_vbus->pullup_gpiod, 0); set_vbus_draw(gpio_vbus, 0); @@ -242,16 +230,12 @@ static int gpio_vbus_set_suspend(struct usb_phy *phy, int suspend) static int gpio_vbus_probe(struct platform_device *pdev) { - struct gpio_vbus_mach_info *pdata = dev_get_platdata(&pdev->dev); struct gpio_vbus_data *gpio_vbus; struct resource *res; - int err, gpio, irq; + struct device *dev = &pdev->dev; + int err, irq; unsigned long irqflags; - if (!pdata || !gpio_is_valid(pdata->gpio_vbus)) - return -EINVAL; - gpio = pdata->gpio_vbus; - gpio_vbus = devm_kzalloc(&pdev->dev, sizeof(struct gpio_vbus_data), GFP_KERNEL); if (!gpio_vbus) @@ -273,37 +257,43 @@ static int gpio_vbus_probe(struct platform_device *pdev) gpio_vbus->phy.otg->usb_phy = &gpio_vbus->phy; gpio_vbus->phy.otg->set_peripheral = gpio_vbus_set_peripheral; - err = devm_gpio_request(&pdev->dev, gpio, "vbus_detect"); - if (err) { - dev_err(&pdev->dev, "can't request vbus gpio %d, err: %d\n", - gpio, err); + /* Look up the VBUS sensing GPIO */ + gpio_vbus->vbus_gpiod = devm_gpiod_get(dev, "vbus", GPIOD_IN); + if (IS_ERR(gpio_vbus->vbus_gpiod)) { + err = PTR_ERR(gpio_vbus->vbus_gpiod); + dev_err(&pdev->dev, "can't request vbus gpio, err: %d\n", err); return err; } - gpio_direction_input(gpio); + gpiod_set_consumer_name(gpio_vbus->vbus_gpiod, "vbus_detect"); res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (res) { irq = res->start; irqflags = (res->flags & IRQF_TRIGGER_MASK) | IRQF_SHARED; } else { - irq = gpio_to_irq(gpio); + irq = gpiod_to_irq(gpio_vbus->vbus_gpiod); irqflags = VBUS_IRQ_FLAGS; } gpio_vbus->irq = irq; - /* if data line pullup is in use, initialize it to "not pulling up" */ - gpio = pdata->gpio_pullup; - if (gpio_is_valid(gpio)) { - err = devm_gpio_request(&pdev->dev, gpio, "udc_pullup"); - if (err) { - dev_err(&pdev->dev, - "can't request pullup gpio %d, err: %d\n", - gpio, err); - return err; - } - gpio_direction_output(gpio, pdata->gpio_pullup_inverted); + /* + * The VBUS sensing GPIO should have a pulldown, which will normally be + * part of a resistor ladder turning a 4.0V-5.25V level on VBUS into a + * value the GPIO detects as active. Some systems will use comparators. + * Get the optional D+ or D- pullup GPIO. If the data line pullup is + * in use, initialize it to "not pulling up" + */ + gpio_vbus->pullup_gpiod = devm_gpiod_get_optional(dev, "pullup", + GPIOD_OUT_LOW); + if (IS_ERR(gpio_vbus->pullup_gpiod)) { + err = PTR_ERR(gpio_vbus->pullup_gpiod); + dev_err(&pdev->dev, "can't request pullup gpio, err: %d\n", + err); + return err; } + if (gpio_vbus->pullup_gpiod) + gpiod_set_consumer_name(gpio_vbus->pullup_gpiod, "udc_pullup"); err = devm_request_irq(&pdev->dev, irq, gpio_vbus_irq, irqflags, "vbus_detect", pdev); @@ -330,7 +320,7 @@ static int gpio_vbus_probe(struct platform_device *pdev) return err; } - device_init_wakeup(&pdev->dev, pdata->wakeup); + /* TODO: wakeup could be enabled here with device_init_wakeup(dev, 1) */ return 0; } diff --git a/drivers/usb/phy/phy-keystone.c b/drivers/usb/phy/phy-keystone.c index 110e6e9ad621..9c226b57153b 100644 --- a/drivers/usb/phy/phy-keystone.c +++ b/drivers/usb/phy/phy-keystone.c @@ -76,7 +76,7 @@ static int keystone_usbphy_probe(struct platform_device *pdev) if (IS_ERR(k_phy->phy_ctrl)) return PTR_ERR(k_phy->phy_ctrl); - ret = usb_phy_gen_create_phy(dev, &k_phy->usb_phy_gen, NULL); + ret = usb_phy_gen_create_phy(dev, &k_phy->usb_phy_gen); if (ret) return ret; diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c index ea7ef1dc0b42..037e8eee737d 100644 --- a/drivers/usb/phy/phy-tegra-usb.c +++ b/drivers/usb/phy/phy-tegra-usb.c @@ -9,54 +9,56 @@ * Venu Byravarasu <vbyravarasu@nvidia.com> */ -#include <linux/resource.h> #include <linux/delay.h> -#include <linux/slab.h> #include <linux/err.h> #include <linux/export.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/iopoll.h> #include <linux/gpio.h> +#include <linux/iopoll.h> +#include <linux/module.h> #include <linux/of.h> #include <linux/of_device.h> #include <linux/of_gpio.h> -#include <linux/usb/otg.h> -#include <linux/usb/ulpi.h> -#include <linux/usb/of.h> +#include <linux/platform_device.h> +#include <linux/resource.h> +#include <linux/slab.h> +#include <linux/spinlock.h> + +#include <linux/regulator/consumer.h> + #include <linux/usb/ehci_def.h> +#include <linux/usb/of.h> #include <linux/usb/tegra_usb_phy.h> -#include <linux/regulator/consumer.h> +#include <linux/usb/ulpi.h> -#define ULPI_VIEWPORT 0x170 +#define ULPI_VIEWPORT 0x170 /* PORTSC PTS/PHCD bits, Tegra20 only */ -#define TEGRA_USB_PORTSC1 0x184 -#define TEGRA_USB_PORTSC1_PTS(x) (((x) & 0x3) << 30) -#define TEGRA_USB_PORTSC1_PHCD (1 << 23) +#define TEGRA_USB_PORTSC1 0x184 +#define TEGRA_USB_PORTSC1_PTS(x) (((x) & 0x3) << 30) +#define TEGRA_USB_PORTSC1_PHCD BIT(23) /* HOSTPC1 PTS/PHCD bits, Tegra30 and above */ -#define TEGRA_USB_HOSTPC1_DEVLC 0x1b4 -#define TEGRA_USB_HOSTPC1_DEVLC_PTS(x) (((x) & 0x7) << 29) -#define TEGRA_USB_HOSTPC1_DEVLC_PHCD (1 << 22) +#define TEGRA_USB_HOSTPC1_DEVLC 0x1b4 +#define TEGRA_USB_HOSTPC1_DEVLC_PTS(x) (((x) & 0x7) << 29) +#define TEGRA_USB_HOSTPC1_DEVLC_PHCD BIT(22) /* Bits of PORTSC1, which will get cleared by writing 1 into them */ #define TEGRA_PORTSC1_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC) -#define USB_SUSP_CTRL 0x400 -#define USB_WAKE_ON_CNNT_EN_DEV (1 << 3) -#define USB_WAKE_ON_DISCON_EN_DEV (1 << 4) -#define USB_SUSP_CLR (1 << 5) -#define USB_PHY_CLK_VALID (1 << 7) -#define UTMIP_RESET (1 << 11) -#define UHSIC_RESET (1 << 11) -#define UTMIP_PHY_ENABLE (1 << 12) -#define ULPI_PHY_ENABLE (1 << 13) -#define USB_SUSP_SET (1 << 14) -#define USB_WAKEUP_DEBOUNCE_COUNT(x) (((x) & 0x7) << 16) - -#define USB1_LEGACY_CTRL 0x410 -#define USB1_NO_LEGACY_MODE (1 << 0) +#define USB_SUSP_CTRL 0x400 +#define USB_WAKE_ON_CNNT_EN_DEV BIT(3) +#define USB_WAKE_ON_DISCON_EN_DEV BIT(4) +#define USB_SUSP_CLR BIT(5) +#define USB_PHY_CLK_VALID BIT(7) +#define UTMIP_RESET BIT(11) +#define UHSIC_RESET BIT(11) +#define UTMIP_PHY_ENABLE BIT(12) +#define ULPI_PHY_ENABLE BIT(13) +#define USB_SUSP_SET BIT(14) +#define USB_WAKEUP_DEBOUNCE_COUNT(x) (((x) & 0x7) << 16) + +#define USB1_LEGACY_CTRL 0x410 +#define USB1_NO_LEGACY_MODE BIT(0) #define USB1_VBUS_SENSE_CTL_MASK (3 << 1) #define USB1_VBUS_SENSE_CTL_VBUS_WAKEUP (0 << 1) #define USB1_VBUS_SENSE_CTL_AB_SESS_VLD_OR_VBUS_WAKEUP \ @@ -64,94 +66,94 @@ #define USB1_VBUS_SENSE_CTL_AB_SESS_VLD (2 << 1) #define USB1_VBUS_SENSE_CTL_A_SESS_VLD (3 << 1) -#define ULPI_TIMING_CTRL_0 0x424 -#define ULPI_OUTPUT_PINMUX_BYP (1 << 10) -#define ULPI_CLKOUT_PINMUX_BYP (1 << 11) +#define ULPI_TIMING_CTRL_0 0x424 +#define ULPI_OUTPUT_PINMUX_BYP BIT(10) +#define ULPI_CLKOUT_PINMUX_BYP BIT(11) -#define ULPI_TIMING_CTRL_1 0x428 -#define ULPI_DATA_TRIMMER_LOAD (1 << 0) -#define ULPI_DATA_TRIMMER_SEL(x) (((x) & 0x7) << 1) -#define ULPI_STPDIRNXT_TRIMMER_LOAD (1 << 16) -#define ULPI_STPDIRNXT_TRIMMER_SEL(x) (((x) & 0x7) << 17) -#define ULPI_DIR_TRIMMER_LOAD (1 << 24) -#define ULPI_DIR_TRIMMER_SEL(x) (((x) & 0x7) << 25) +#define ULPI_TIMING_CTRL_1 0x428 +#define ULPI_DATA_TRIMMER_LOAD BIT(0) +#define ULPI_DATA_TRIMMER_SEL(x) (((x) & 0x7) << 1) +#define ULPI_STPDIRNXT_TRIMMER_LOAD BIT(16) +#define ULPI_STPDIRNXT_TRIMMER_SEL(x) (((x) & 0x7) << 17) +#define ULPI_DIR_TRIMMER_LOAD BIT(24) +#define ULPI_DIR_TRIMMER_SEL(x) (((x) & 0x7) << 25) -#define UTMIP_PLL_CFG1 0x804 +#define UTMIP_PLL_CFG1 0x804 #define UTMIP_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0) #define UTMIP_PLLU_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 27) -#define UTMIP_XCVR_CFG0 0x808 +#define UTMIP_XCVR_CFG0 0x808 #define UTMIP_XCVR_SETUP(x) (((x) & 0xf) << 0) #define UTMIP_XCVR_SETUP_MSB(x) ((((x) & 0x70) >> 4) << 22) #define UTMIP_XCVR_LSRSLEW(x) (((x) & 0x3) << 8) #define UTMIP_XCVR_LSFSLEW(x) (((x) & 0x3) << 10) -#define UTMIP_FORCE_PD_POWERDOWN (1 << 14) -#define UTMIP_FORCE_PD2_POWERDOWN (1 << 16) -#define UTMIP_FORCE_PDZI_POWERDOWN (1 << 18) -#define UTMIP_XCVR_LSBIAS_SEL (1 << 21) +#define UTMIP_FORCE_PD_POWERDOWN BIT(14) +#define UTMIP_FORCE_PD2_POWERDOWN BIT(16) +#define UTMIP_FORCE_PDZI_POWERDOWN BIT(18) +#define UTMIP_XCVR_LSBIAS_SEL BIT(21) #define UTMIP_XCVR_HSSLEW(x) (((x) & 0x3) << 4) #define UTMIP_XCVR_HSSLEW_MSB(x) ((((x) & 0x1fc) >> 2) << 25) -#define UTMIP_BIAS_CFG0 0x80c -#define UTMIP_OTGPD (1 << 11) -#define UTMIP_BIASPD (1 << 10) -#define UTMIP_HSSQUELCH_LEVEL(x) (((x) & 0x3) << 0) -#define UTMIP_HSDISCON_LEVEL(x) (((x) & 0x3) << 2) -#define UTMIP_HSDISCON_LEVEL_MSB(x) ((((x) & 0x4) >> 2) << 24) +#define UTMIP_BIAS_CFG0 0x80c +#define UTMIP_OTGPD BIT(11) +#define UTMIP_BIASPD BIT(10) +#define UTMIP_HSSQUELCH_LEVEL(x) (((x) & 0x3) << 0) +#define UTMIP_HSDISCON_LEVEL(x) (((x) & 0x3) << 2) +#define UTMIP_HSDISCON_LEVEL_MSB(x) ((((x) & 0x4) >> 2) << 24) -#define UTMIP_HSRX_CFG0 0x810 -#define UTMIP_ELASTIC_LIMIT(x) (((x) & 0x1f) << 10) -#define UTMIP_IDLE_WAIT(x) (((x) & 0x1f) << 15) +#define UTMIP_HSRX_CFG0 0x810 +#define UTMIP_ELASTIC_LIMIT(x) (((x) & 0x1f) << 10) +#define UTMIP_IDLE_WAIT(x) (((x) & 0x1f) << 15) -#define UTMIP_HSRX_CFG1 0x814 -#define UTMIP_HS_SYNC_START_DLY(x) (((x) & 0x1f) << 1) +#define UTMIP_HSRX_CFG1 0x814 +#define UTMIP_HS_SYNC_START_DLY(x) (((x) & 0x1f) << 1) -#define UTMIP_TX_CFG0 0x820 -#define UTMIP_FS_PREABMLE_J (1 << 19) -#define UTMIP_HS_DISCON_DISABLE (1 << 8) +#define UTMIP_TX_CFG0 0x820 +#define UTMIP_FS_PREABMLE_J BIT(19) +#define UTMIP_HS_DISCON_DISABLE BIT(8) -#define UTMIP_MISC_CFG0 0x824 -#define UTMIP_DPDM_OBSERVE (1 << 26) -#define UTMIP_DPDM_OBSERVE_SEL(x) (((x) & 0xf) << 27) -#define UTMIP_DPDM_OBSERVE_SEL_FS_J UTMIP_DPDM_OBSERVE_SEL(0xf) -#define UTMIP_DPDM_OBSERVE_SEL_FS_K UTMIP_DPDM_OBSERVE_SEL(0xe) -#define UTMIP_DPDM_OBSERVE_SEL_FS_SE1 UTMIP_DPDM_OBSERVE_SEL(0xd) -#define UTMIP_DPDM_OBSERVE_SEL_FS_SE0 UTMIP_DPDM_OBSERVE_SEL(0xc) -#define UTMIP_SUSPEND_EXIT_ON_EDGE (1 << 22) +#define UTMIP_MISC_CFG0 0x824 +#define UTMIP_DPDM_OBSERVE BIT(26) +#define UTMIP_DPDM_OBSERVE_SEL(x) (((x) & 0xf) << 27) +#define UTMIP_DPDM_OBSERVE_SEL_FS_J UTMIP_DPDM_OBSERVE_SEL(0xf) +#define UTMIP_DPDM_OBSERVE_SEL_FS_K UTMIP_DPDM_OBSERVE_SEL(0xe) +#define UTMIP_DPDM_OBSERVE_SEL_FS_SE1 UTMIP_DPDM_OBSERVE_SEL(0xd) +#define UTMIP_DPDM_OBSERVE_SEL_FS_SE0 UTMIP_DPDM_OBSERVE_SEL(0xc) +#define UTMIP_SUSPEND_EXIT_ON_EDGE BIT(22) -#define UTMIP_MISC_CFG1 0x828 -#define UTMIP_PLL_ACTIVE_DLY_COUNT(x) (((x) & 0x1f) << 18) -#define UTMIP_PLLU_STABLE_COUNT(x) (((x) & 0xfff) << 6) +#define UTMIP_MISC_CFG1 0x828 +#define UTMIP_PLL_ACTIVE_DLY_COUNT(x) (((x) & 0x1f) << 18) +#define UTMIP_PLLU_STABLE_COUNT(x) (((x) & 0xfff) << 6) -#define UTMIP_DEBOUNCE_CFG0 0x82c -#define UTMIP_BIAS_DEBOUNCE_A(x) (((x) & 0xffff) << 0) +#define UTMIP_DEBOUNCE_CFG0 0x82c +#define UTMIP_BIAS_DEBOUNCE_A(x) (((x) & 0xffff) << 0) -#define UTMIP_BAT_CHRG_CFG0 0x830 -#define UTMIP_PD_CHRG (1 << 0) +#define UTMIP_BAT_CHRG_CFG0 0x830 +#define UTMIP_PD_CHRG BIT(0) -#define UTMIP_SPARE_CFG0 0x834 -#define FUSE_SETUP_SEL (1 << 3) +#define UTMIP_SPARE_CFG0 0x834 +#define FUSE_SETUP_SEL BIT(3) -#define UTMIP_XCVR_CFG1 0x838 -#define UTMIP_FORCE_PDDISC_POWERDOWN (1 << 0) -#define UTMIP_FORCE_PDCHRP_POWERDOWN (1 << 2) -#define UTMIP_FORCE_PDDR_POWERDOWN (1 << 4) -#define UTMIP_XCVR_TERM_RANGE_ADJ(x) (((x) & 0xf) << 18) +#define UTMIP_XCVR_CFG1 0x838 +#define UTMIP_FORCE_PDDISC_POWERDOWN BIT(0) +#define UTMIP_FORCE_PDCHRP_POWERDOWN BIT(2) +#define UTMIP_FORCE_PDDR_POWERDOWN BIT(4) +#define UTMIP_XCVR_TERM_RANGE_ADJ(x) (((x) & 0xf) << 18) -#define UTMIP_BIAS_CFG1 0x83c -#define UTMIP_BIAS_PDTRK_COUNT(x) (((x) & 0x1f) << 3) +#define UTMIP_BIAS_CFG1 0x83c +#define UTMIP_BIAS_PDTRK_COUNT(x) (((x) & 0x1f) << 3) /* For Tegra30 and above only, the address is different in Tegra20 */ -#define USB_USBMODE 0x1f8 -#define USB_USBMODE_MASK (3 << 0) -#define USB_USBMODE_HOST (3 << 0) -#define USB_USBMODE_DEVICE (2 << 0) +#define USB_USBMODE 0x1f8 +#define USB_USBMODE_MASK (3 << 0) +#define USB_USBMODE_HOST (3 << 0) +#define USB_USBMODE_DEVICE (2 << 0) static DEFINE_SPINLOCK(utmip_pad_lock); -static int utmip_pad_count; +static unsigned int utmip_pad_count; struct tegra_xtal_freq { - int freq; + unsigned int freq; u8 enable_delay; u8 stable_count; u8 active_delay; @@ -194,43 +196,49 @@ static const struct tegra_xtal_freq tegra_freq_table[] = { }, }; +static inline struct tegra_usb_phy *to_tegra_usb_phy(struct usb_phy *u_phy) +{ + return container_of(u_phy, struct tegra_usb_phy, u_phy); +} + static void set_pts(struct tegra_usb_phy *phy, u8 pts_val) { void __iomem *base = phy->regs; - unsigned long val; + u32 val; if (phy->soc_config->has_hostpc) { - val = readl(base + TEGRA_USB_HOSTPC1_DEVLC); + val = readl_relaxed(base + TEGRA_USB_HOSTPC1_DEVLC); val &= ~TEGRA_USB_HOSTPC1_DEVLC_PTS(~0); val |= TEGRA_USB_HOSTPC1_DEVLC_PTS(pts_val); - writel(val, base + TEGRA_USB_HOSTPC1_DEVLC); + writel_relaxed(val, base + TEGRA_USB_HOSTPC1_DEVLC); } else { - val = readl(base + TEGRA_USB_PORTSC1) & ~TEGRA_PORTSC1_RWC_BITS; + val = readl_relaxed(base + TEGRA_USB_PORTSC1); + val &= ~TEGRA_PORTSC1_RWC_BITS; val &= ~TEGRA_USB_PORTSC1_PTS(~0); val |= TEGRA_USB_PORTSC1_PTS(pts_val); - writel(val, base + TEGRA_USB_PORTSC1); + writel_relaxed(val, base + TEGRA_USB_PORTSC1); } } static void set_phcd(struct tegra_usb_phy *phy, bool enable) { void __iomem *base = phy->regs; - unsigned long val; + u32 val; if (phy->soc_config->has_hostpc) { - val = readl(base + TEGRA_USB_HOSTPC1_DEVLC); + val = readl_relaxed(base + TEGRA_USB_HOSTPC1_DEVLC); if (enable) val |= TEGRA_USB_HOSTPC1_DEVLC_PHCD; else val &= ~TEGRA_USB_HOSTPC1_DEVLC_PHCD; - writel(val, base + TEGRA_USB_HOSTPC1_DEVLC); + writel_relaxed(val, base + TEGRA_USB_HOSTPC1_DEVLC); } else { - val = readl(base + TEGRA_USB_PORTSC1) & ~PORT_RWC_BITS; + val = readl_relaxed(base + TEGRA_USB_PORTSC1) & ~PORT_RWC_BITS; if (enable) val |= TEGRA_USB_PORTSC1_PHCD; else val &= ~TEGRA_USB_PORTSC1_PHCD; - writel(val, base + TEGRA_USB_PORTSC1); + writel_relaxed(val, base + TEGRA_USB_PORTSC1); } } @@ -238,23 +246,6 @@ static int utmip_pad_open(struct tegra_usb_phy *phy) { int ret; - phy->pad_clk = devm_clk_get(phy->u_phy.dev, "utmi-pads"); - if (IS_ERR(phy->pad_clk)) { - ret = PTR_ERR(phy->pad_clk); - dev_err(phy->u_phy.dev, - "Failed to get UTMIP pad clock: %d\n", ret); - return ret; - } - - phy->pad_rst = devm_reset_control_get_optional_shared( - phy->u_phy.dev, "utmi-pads"); - if (IS_ERR(phy->pad_rst)) { - ret = PTR_ERR(phy->pad_rst); - dev_err(phy->u_phy.dev, - "Failed to get UTMI-pads reset: %d\n", ret); - return ret; - } - ret = clk_prepare_enable(phy->pad_clk); if (ret) { dev_err(phy->u_phy.dev, @@ -315,18 +306,21 @@ static int utmip_pad_close(struct tegra_usb_phy *phy) return ret; } -static void utmip_pad_power_on(struct tegra_usb_phy *phy) +static int utmip_pad_power_on(struct tegra_usb_phy *phy) { - unsigned long val, flags; - void __iomem *base = phy->pad_regs; struct tegra_utmip_config *config = phy->config; + void __iomem *base = phy->pad_regs; + u32 val; + int err; - clk_prepare_enable(phy->pad_clk); + err = clk_prepare_enable(phy->pad_clk); + if (err) + return err; - spin_lock_irqsave(&utmip_pad_lock, flags); + spin_lock(&utmip_pad_lock); if (utmip_pad_count++ == 0) { - val = readl(base + UTMIP_BIAS_CFG0); + val = readl_relaxed(base + UTMIP_BIAS_CFG0); val &= ~(UTMIP_OTGPD | UTMIP_BIASPD); if (phy->soc_config->requires_extra_tuning_parameters) { @@ -338,53 +332,59 @@ static void utmip_pad_power_on(struct tegra_usb_phy *phy) val |= UTMIP_HSDISCON_LEVEL(config->hsdiscon_level); val |= UTMIP_HSDISCON_LEVEL_MSB(config->hsdiscon_level); } - writel(val, base + UTMIP_BIAS_CFG0); + writel_relaxed(val, base + UTMIP_BIAS_CFG0); } - spin_unlock_irqrestore(&utmip_pad_lock, flags); + spin_unlock(&utmip_pad_lock); clk_disable_unprepare(phy->pad_clk); + + return 0; } static int utmip_pad_power_off(struct tegra_usb_phy *phy) { - unsigned long val, flags; void __iomem *base = phy->pad_regs; + u32 val; + int ret; + + ret = clk_prepare_enable(phy->pad_clk); + if (ret) + return ret; + + spin_lock(&utmip_pad_lock); if (!utmip_pad_count) { dev_err(phy->u_phy.dev, "UTMIP pad already powered off\n"); - return -EINVAL; + ret = -EINVAL; + goto ulock; } - clk_prepare_enable(phy->pad_clk); - - spin_lock_irqsave(&utmip_pad_lock, flags); - if (--utmip_pad_count == 0) { - val = readl(base + UTMIP_BIAS_CFG0); + val = readl_relaxed(base + UTMIP_BIAS_CFG0); val |= UTMIP_OTGPD | UTMIP_BIASPD; - writel(val, base + UTMIP_BIAS_CFG0); + writel_relaxed(val, base + UTMIP_BIAS_CFG0); } - - spin_unlock_irqrestore(&utmip_pad_lock, flags); +ulock: + spin_unlock(&utmip_pad_lock); clk_disable_unprepare(phy->pad_clk); - return 0; + return ret; } static int utmi_wait_register(void __iomem *reg, u32 mask, u32 result) { u32 tmp; - return readl_poll_timeout(reg, tmp, (tmp & mask) == result, - 2000, 6000); + return readl_relaxed_poll_timeout(reg, tmp, (tmp & mask) == result, + 2000, 6000); } static void utmi_phy_clk_disable(struct tegra_usb_phy *phy) { - unsigned long val; void __iomem *base = phy->regs; + u32 val; /* * The USB driver may have already initiated the phy clock @@ -395,27 +395,28 @@ static void utmi_phy_clk_disable(struct tegra_usb_phy *phy) return; if (phy->is_legacy_phy) { - val = readl(base + USB_SUSP_CTRL); + val = readl_relaxed(base + USB_SUSP_CTRL); val |= USB_SUSP_SET; - writel(val, base + USB_SUSP_CTRL); + writel_relaxed(val, base + USB_SUSP_CTRL); - udelay(10); + usleep_range(10, 100); - val = readl(base + USB_SUSP_CTRL); + val = readl_relaxed(base + USB_SUSP_CTRL); val &= ~USB_SUSP_SET; - writel(val, base + USB_SUSP_CTRL); - } else + writel_relaxed(val, base + USB_SUSP_CTRL); + } else { set_phcd(phy, true); + } - if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, 0) < 0) + if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, 0)) dev_err(phy->u_phy.dev, "Timeout waiting for PHY to stabilize on disable\n"); } static void utmi_phy_clk_enable(struct tegra_usb_phy *phy) { - unsigned long val; void __iomem *base = phy->regs; + u32 val; /* * The USB driver may have already initiated the phy clock @@ -427,97 +428,101 @@ static void utmi_phy_clk_enable(struct tegra_usb_phy *phy) return; if (phy->is_legacy_phy) { - val = readl(base + USB_SUSP_CTRL); + val = readl_relaxed(base + USB_SUSP_CTRL); val |= USB_SUSP_CLR; - writel(val, base + USB_SUSP_CTRL); + writel_relaxed(val, base + USB_SUSP_CTRL); - udelay(10); + usleep_range(10, 100); - val = readl(base + USB_SUSP_CTRL); + val = readl_relaxed(base + USB_SUSP_CTRL); val &= ~USB_SUSP_CLR; - writel(val, base + USB_SUSP_CTRL); - } else + writel_relaxed(val, base + USB_SUSP_CTRL); + } else { set_phcd(phy, false); + } if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, - USB_PHY_CLK_VALID)) + USB_PHY_CLK_VALID)) dev_err(phy->u_phy.dev, "Timeout waiting for PHY to stabilize on enable\n"); } static int utmi_phy_power_on(struct tegra_usb_phy *phy) { - unsigned long val; - void __iomem *base = phy->regs; struct tegra_utmip_config *config = phy->config; + void __iomem *base = phy->regs; + u32 val; + int err; - val = readl(base + USB_SUSP_CTRL); + val = readl_relaxed(base + USB_SUSP_CTRL); val |= UTMIP_RESET; - writel(val, base + USB_SUSP_CTRL); + writel_relaxed(val, base + USB_SUSP_CTRL); if (phy->is_legacy_phy) { - val = readl(base + USB1_LEGACY_CTRL); + val = readl_relaxed(base + USB1_LEGACY_CTRL); val |= USB1_NO_LEGACY_MODE; - writel(val, base + USB1_LEGACY_CTRL); + writel_relaxed(val, base + USB1_LEGACY_CTRL); } - val = readl(base + UTMIP_TX_CFG0); + val = readl_relaxed(base + UTMIP_TX_CFG0); val |= UTMIP_FS_PREABMLE_J; - writel(val, base + UTMIP_TX_CFG0); + writel_relaxed(val, base + UTMIP_TX_CFG0); - val = readl(base + UTMIP_HSRX_CFG0); + val = readl_relaxed(base + UTMIP_HSRX_CFG0); val &= ~(UTMIP_IDLE_WAIT(~0) | UTMIP_ELASTIC_LIMIT(~0)); val |= UTMIP_IDLE_WAIT(config->idle_wait_delay); val |= UTMIP_ELASTIC_LIMIT(config->elastic_limit); - writel(val, base + UTMIP_HSRX_CFG0); + writel_relaxed(val, base + UTMIP_HSRX_CFG0); - val = readl(base + UTMIP_HSRX_CFG1); + val = readl_relaxed(base + UTMIP_HSRX_CFG1); val &= ~UTMIP_HS_SYNC_START_DLY(~0); val |= UTMIP_HS_SYNC_START_DLY(config->hssync_start_delay); - writel(val, base + UTMIP_HSRX_CFG1); + writel_relaxed(val, base + UTMIP_HSRX_CFG1); - val = readl(base + UTMIP_DEBOUNCE_CFG0); + val = readl_relaxed(base + UTMIP_DEBOUNCE_CFG0); val &= ~UTMIP_BIAS_DEBOUNCE_A(~0); val |= UTMIP_BIAS_DEBOUNCE_A(phy->freq->debounce); - writel(val, base + UTMIP_DEBOUNCE_CFG0); + writel_relaxed(val, base + UTMIP_DEBOUNCE_CFG0); - val = readl(base + UTMIP_MISC_CFG0); + val = readl_relaxed(base + UTMIP_MISC_CFG0); val &= ~UTMIP_SUSPEND_EXIT_ON_EDGE; - writel(val, base + UTMIP_MISC_CFG0); + writel_relaxed(val, base + UTMIP_MISC_CFG0); if (!phy->soc_config->utmi_pll_config_in_car_module) { - val = readl(base + UTMIP_MISC_CFG1); + val = readl_relaxed(base + UTMIP_MISC_CFG1); val &= ~(UTMIP_PLL_ACTIVE_DLY_COUNT(~0) | UTMIP_PLLU_STABLE_COUNT(~0)); val |= UTMIP_PLL_ACTIVE_DLY_COUNT(phy->freq->active_delay) | UTMIP_PLLU_STABLE_COUNT(phy->freq->stable_count); - writel(val, base + UTMIP_MISC_CFG1); + writel_relaxed(val, base + UTMIP_MISC_CFG1); - val = readl(base + UTMIP_PLL_CFG1); + val = readl_relaxed(base + UTMIP_PLL_CFG1); val &= ~(UTMIP_XTAL_FREQ_COUNT(~0) | UTMIP_PLLU_ENABLE_DLY_COUNT(~0)); val |= UTMIP_XTAL_FREQ_COUNT(phy->freq->xtal_freq_count) | UTMIP_PLLU_ENABLE_DLY_COUNT(phy->freq->enable_delay); - writel(val, base + UTMIP_PLL_CFG1); + writel_relaxed(val, base + UTMIP_PLL_CFG1); } if (phy->mode == USB_DR_MODE_PERIPHERAL) { - val = readl(base + USB_SUSP_CTRL); + val = readl_relaxed(base + USB_SUSP_CTRL); val &= ~(USB_WAKE_ON_CNNT_EN_DEV | USB_WAKE_ON_DISCON_EN_DEV); - writel(val, base + USB_SUSP_CTRL); + writel_relaxed(val, base + USB_SUSP_CTRL); - val = readl(base + UTMIP_BAT_CHRG_CFG0); + val = readl_relaxed(base + UTMIP_BAT_CHRG_CFG0); val &= ~UTMIP_PD_CHRG; - writel(val, base + UTMIP_BAT_CHRG_CFG0); + writel_relaxed(val, base + UTMIP_BAT_CHRG_CFG0); } else { - val = readl(base + UTMIP_BAT_CHRG_CFG0); + val = readl_relaxed(base + UTMIP_BAT_CHRG_CFG0); val |= UTMIP_PD_CHRG; - writel(val, base + UTMIP_BAT_CHRG_CFG0); + writel_relaxed(val, base + UTMIP_BAT_CHRG_CFG0); } - utmip_pad_power_on(phy); + err = utmip_pad_power_on(phy); + if (err) + return err; - val = readl(base + UTMIP_XCVR_CFG0); + val = readl_relaxed(base + UTMIP_XCVR_CFG0); val &= ~(UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN | UTMIP_FORCE_PDZI_POWERDOWN | UTMIP_XCVR_LSBIAS_SEL | UTMIP_XCVR_SETUP(~0) | UTMIP_XCVR_SETUP_MSB(~0) | @@ -535,57 +540,57 @@ static int utmi_phy_power_on(struct tegra_usb_phy *phy) val |= UTMIP_XCVR_HSSLEW(config->xcvr_hsslew); val |= UTMIP_XCVR_HSSLEW_MSB(config->xcvr_hsslew); } - writel(val, base + UTMIP_XCVR_CFG0); + writel_relaxed(val, base + UTMIP_XCVR_CFG0); - val = readl(base + UTMIP_XCVR_CFG1); + val = readl_relaxed(base + UTMIP_XCVR_CFG1); val &= ~(UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN | UTMIP_FORCE_PDDR_POWERDOWN | UTMIP_XCVR_TERM_RANGE_ADJ(~0)); val |= UTMIP_XCVR_TERM_RANGE_ADJ(config->term_range_adj); - writel(val, base + UTMIP_XCVR_CFG1); + writel_relaxed(val, base + UTMIP_XCVR_CFG1); - val = readl(base + UTMIP_BIAS_CFG1); + val = readl_relaxed(base + UTMIP_BIAS_CFG1); val &= ~UTMIP_BIAS_PDTRK_COUNT(~0); val |= UTMIP_BIAS_PDTRK_COUNT(0x5); - writel(val, base + UTMIP_BIAS_CFG1); + writel_relaxed(val, base + UTMIP_BIAS_CFG1); - val = readl(base + UTMIP_SPARE_CFG0); + val = readl_relaxed(base + UTMIP_SPARE_CFG0); if (config->xcvr_setup_use_fuses) val |= FUSE_SETUP_SEL; else val &= ~FUSE_SETUP_SEL; - writel(val, base + UTMIP_SPARE_CFG0); + writel_relaxed(val, base + UTMIP_SPARE_CFG0); if (!phy->is_legacy_phy) { - val = readl(base + USB_SUSP_CTRL); + val = readl_relaxed(base + USB_SUSP_CTRL); val |= UTMIP_PHY_ENABLE; - writel(val, base + USB_SUSP_CTRL); + writel_relaxed(val, base + USB_SUSP_CTRL); } - val = readl(base + USB_SUSP_CTRL); + val = readl_relaxed(base + USB_SUSP_CTRL); val &= ~UTMIP_RESET; - writel(val, base + USB_SUSP_CTRL); + writel_relaxed(val, base + USB_SUSP_CTRL); if (phy->is_legacy_phy) { - val = readl(base + USB1_LEGACY_CTRL); + val = readl_relaxed(base + USB1_LEGACY_CTRL); val &= ~USB1_VBUS_SENSE_CTL_MASK; val |= USB1_VBUS_SENSE_CTL_A_SESS_VLD; - writel(val, base + USB1_LEGACY_CTRL); + writel_relaxed(val, base + USB1_LEGACY_CTRL); - val = readl(base + USB_SUSP_CTRL); + val = readl_relaxed(base + USB_SUSP_CTRL); val &= ~USB_SUSP_SET; - writel(val, base + USB_SUSP_CTRL); + writel_relaxed(val, base + USB_SUSP_CTRL); } utmi_phy_clk_enable(phy); if (phy->soc_config->requires_usbmode_setup) { - val = readl(base + USB_USBMODE); + val = readl_relaxed(base + USB_USBMODE); val &= ~USB_USBMODE_MASK; if (phy->mode == USB_DR_MODE_HOST) val |= USB_USBMODE_HOST; else val |= USB_USBMODE_DEVICE; - writel(val, base + USB_USBMODE); + writel_relaxed(val, base + USB_USBMODE); } if (!phy->is_legacy_phy) @@ -596,258 +601,252 @@ static int utmi_phy_power_on(struct tegra_usb_phy *phy) static int utmi_phy_power_off(struct tegra_usb_phy *phy) { - unsigned long val; void __iomem *base = phy->regs; + u32 val; utmi_phy_clk_disable(phy); if (phy->mode == USB_DR_MODE_PERIPHERAL) { - val = readl(base + USB_SUSP_CTRL); + val = readl_relaxed(base + USB_SUSP_CTRL); val &= ~USB_WAKEUP_DEBOUNCE_COUNT(~0); val |= USB_WAKE_ON_CNNT_EN_DEV | USB_WAKEUP_DEBOUNCE_COUNT(5); - writel(val, base + USB_SUSP_CTRL); + writel_relaxed(val, base + USB_SUSP_CTRL); } - val = readl(base + USB_SUSP_CTRL); + val = readl_relaxed(base + USB_SUSP_CTRL); val |= UTMIP_RESET; - writel(val, base + USB_SUSP_CTRL); + writel_relaxed(val, base + USB_SUSP_CTRL); - val = readl(base + UTMIP_BAT_CHRG_CFG0); + val = readl_relaxed(base + UTMIP_BAT_CHRG_CFG0); val |= UTMIP_PD_CHRG; - writel(val, base + UTMIP_BAT_CHRG_CFG0); + writel_relaxed(val, base + UTMIP_BAT_CHRG_CFG0); - val = readl(base + UTMIP_XCVR_CFG0); + val = readl_relaxed(base + UTMIP_XCVR_CFG0); val |= UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN | UTMIP_FORCE_PDZI_POWERDOWN; - writel(val, base + UTMIP_XCVR_CFG0); + writel_relaxed(val, base + UTMIP_XCVR_CFG0); - val = readl(base + UTMIP_XCVR_CFG1); + val = readl_relaxed(base + UTMIP_XCVR_CFG1); val |= UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN | UTMIP_FORCE_PDDR_POWERDOWN; - writel(val, base + UTMIP_XCVR_CFG1); + writel_relaxed(val, base + UTMIP_XCVR_CFG1); return utmip_pad_power_off(phy); } static void utmi_phy_preresume(struct tegra_usb_phy *phy) { - unsigned long val; void __iomem *base = phy->regs; + u32 val; - val = readl(base + UTMIP_TX_CFG0); + val = readl_relaxed(base + UTMIP_TX_CFG0); val |= UTMIP_HS_DISCON_DISABLE; - writel(val, base + UTMIP_TX_CFG0); + writel_relaxed(val, base + UTMIP_TX_CFG0); } static void utmi_phy_postresume(struct tegra_usb_phy *phy) { - unsigned long val; void __iomem *base = phy->regs; + u32 val; - val = readl(base + UTMIP_TX_CFG0); + val = readl_relaxed(base + UTMIP_TX_CFG0); val &= ~UTMIP_HS_DISCON_DISABLE; - writel(val, base + UTMIP_TX_CFG0); + writel_relaxed(val, base + UTMIP_TX_CFG0); } static void utmi_phy_restore_start(struct tegra_usb_phy *phy, enum tegra_usb_phy_port_speed port_speed) { - unsigned long val; void __iomem *base = phy->regs; + u32 val; - val = readl(base + UTMIP_MISC_CFG0); + val = readl_relaxed(base + UTMIP_MISC_CFG0); val &= ~UTMIP_DPDM_OBSERVE_SEL(~0); if (port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW) val |= UTMIP_DPDM_OBSERVE_SEL_FS_K; else val |= UTMIP_DPDM_OBSERVE_SEL_FS_J; - writel(val, base + UTMIP_MISC_CFG0); - udelay(1); + writel_relaxed(val, base + UTMIP_MISC_CFG0); + usleep_range(1, 10); - val = readl(base + UTMIP_MISC_CFG0); + val = readl_relaxed(base + UTMIP_MISC_CFG0); val |= UTMIP_DPDM_OBSERVE; - writel(val, base + UTMIP_MISC_CFG0); - udelay(10); + writel_relaxed(val, base + UTMIP_MISC_CFG0); + usleep_range(10, 100); } static void utmi_phy_restore_end(struct tegra_usb_phy *phy) { - unsigned long val; void __iomem *base = phy->regs; + u32 val; - val = readl(base + UTMIP_MISC_CFG0); + val = readl_relaxed(base + UTMIP_MISC_CFG0); val &= ~UTMIP_DPDM_OBSERVE; - writel(val, base + UTMIP_MISC_CFG0); - udelay(10); + writel_relaxed(val, base + UTMIP_MISC_CFG0); + usleep_range(10, 100); } static int ulpi_phy_power_on(struct tegra_usb_phy *phy) { - int ret; - unsigned long val; void __iomem *base = phy->regs; + u32 val; + int err; - ret = gpio_direction_output(phy->reset_gpio, 0); - if (ret < 0) { - dev_err(phy->u_phy.dev, "GPIO %d not set to 0: %d\n", - phy->reset_gpio, ret); - return ret; - } - msleep(5); - ret = gpio_direction_output(phy->reset_gpio, 1); - if (ret < 0) { - dev_err(phy->u_phy.dev, "GPIO %d not set to 1: %d\n", - phy->reset_gpio, ret); - return ret; - } + gpiod_set_value_cansleep(phy->reset_gpio, 1); + + err = clk_prepare_enable(phy->clk); + if (err) + return err; + + usleep_range(5000, 6000); + + gpiod_set_value_cansleep(phy->reset_gpio, 0); - clk_prepare_enable(phy->clk); - msleep(1); + usleep_range(1000, 2000); - val = readl(base + USB_SUSP_CTRL); + val = readl_relaxed(base + USB_SUSP_CTRL); val |= UHSIC_RESET; - writel(val, base + USB_SUSP_CTRL); + writel_relaxed(val, base + USB_SUSP_CTRL); - val = readl(base + ULPI_TIMING_CTRL_0); + val = readl_relaxed(base + ULPI_TIMING_CTRL_0); val |= ULPI_OUTPUT_PINMUX_BYP | ULPI_CLKOUT_PINMUX_BYP; - writel(val, base + ULPI_TIMING_CTRL_0); + writel_relaxed(val, base + ULPI_TIMING_CTRL_0); - val = readl(base + USB_SUSP_CTRL); + val = readl_relaxed(base + USB_SUSP_CTRL); val |= ULPI_PHY_ENABLE; - writel(val, base + USB_SUSP_CTRL); + writel_relaxed(val, base + USB_SUSP_CTRL); val = 0; - writel(val, base + ULPI_TIMING_CTRL_1); + writel_relaxed(val, base + ULPI_TIMING_CTRL_1); val |= ULPI_DATA_TRIMMER_SEL(4); val |= ULPI_STPDIRNXT_TRIMMER_SEL(4); val |= ULPI_DIR_TRIMMER_SEL(4); - writel(val, base + ULPI_TIMING_CTRL_1); - udelay(10); + writel_relaxed(val, base + ULPI_TIMING_CTRL_1); + usleep_range(10, 100); val |= ULPI_DATA_TRIMMER_LOAD; val |= ULPI_STPDIRNXT_TRIMMER_LOAD; val |= ULPI_DIR_TRIMMER_LOAD; - writel(val, base + ULPI_TIMING_CTRL_1); + writel_relaxed(val, base + ULPI_TIMING_CTRL_1); /* Fix VbusInvalid due to floating VBUS */ - ret = usb_phy_io_write(phy->ulpi, 0x40, 0x08); - if (ret) { - dev_err(phy->u_phy.dev, "ULPI write failed: %d\n", ret); - return ret; + err = usb_phy_io_write(phy->ulpi, 0x40, 0x08); + if (err) { + dev_err(phy->u_phy.dev, "ULPI write failed: %d\n", err); + goto disable_clk; } - ret = usb_phy_io_write(phy->ulpi, 0x80, 0x0B); - if (ret) { - dev_err(phy->u_phy.dev, "ULPI write failed: %d\n", ret); - return ret; + err = usb_phy_io_write(phy->ulpi, 0x80, 0x0B); + if (err) { + dev_err(phy->u_phy.dev, "ULPI write failed: %d\n", err); + goto disable_clk; } - val = readl(base + USB_SUSP_CTRL); + val = readl_relaxed(base + USB_SUSP_CTRL); val |= USB_SUSP_CLR; - writel(val, base + USB_SUSP_CTRL); - udelay(100); + writel_relaxed(val, base + USB_SUSP_CTRL); + usleep_range(100, 1000); - val = readl(base + USB_SUSP_CTRL); + val = readl_relaxed(base + USB_SUSP_CTRL); val &= ~USB_SUSP_CLR; - writel(val, base + USB_SUSP_CTRL); + writel_relaxed(val, base + USB_SUSP_CTRL); return 0; -} -static int ulpi_phy_power_off(struct tegra_usb_phy *phy) -{ - clk_disable(phy->clk); - return gpio_direction_output(phy->reset_gpio, 0); +disable_clk: + clk_disable_unprepare(phy->clk); + + return err; } -static void tegra_usb_phy_close(struct tegra_usb_phy *phy) +static int ulpi_phy_power_off(struct tegra_usb_phy *phy) { - if (!IS_ERR(phy->vbus)) - regulator_disable(phy->vbus); + gpiod_set_value_cansleep(phy->reset_gpio, 1); + usleep_range(5000, 6000); + clk_disable_unprepare(phy->clk); - if (!phy->is_ulpi_phy) - utmip_pad_close(phy); - - clk_disable_unprepare(phy->pll_u); + return 0; } static int tegra_usb_phy_power_on(struct tegra_usb_phy *phy) { + int err; + + if (phy->powered_on) + return 0; + if (phy->is_ulpi_phy) - return ulpi_phy_power_on(phy); + err = ulpi_phy_power_on(phy); else - return utmi_phy_power_on(phy); + err = utmi_phy_power_on(phy); + if (err) + return err; + + phy->powered_on = true; + + return 0; } static int tegra_usb_phy_power_off(struct tegra_usb_phy *phy) { + int err; + + if (!phy->powered_on) + return 0; + if (phy->is_ulpi_phy) - return ulpi_phy_power_off(phy); + err = ulpi_phy_power_off(phy); else - return utmi_phy_power_off(phy); -} + err = utmi_phy_power_off(phy); + if (err) + return err; -static int tegra_usb_phy_suspend(struct usb_phy *x, int suspend) -{ - struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); - if (suspend) - return tegra_usb_phy_power_off(phy); - else - return tegra_usb_phy_power_on(phy); + phy->powered_on = false; + + return 0; } -static int ulpi_open(struct tegra_usb_phy *phy) +static void tegra_usb_phy_shutdown(struct usb_phy *u_phy) { - int err; + struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy); - phy->clk = devm_clk_get(phy->u_phy.dev, "ulpi-link"); - if (IS_ERR(phy->clk)) { - err = PTR_ERR(phy->clk); - dev_err(phy->u_phy.dev, "Failed to get ULPI clock: %d\n", err); - return err; - } + if (WARN_ON(!phy->freq)) + return; - err = devm_gpio_request(phy->u_phy.dev, phy->reset_gpio, - "ulpi_phy_reset_b"); - if (err < 0) { - dev_err(phy->u_phy.dev, "Request failed for GPIO %d: %d\n", - phy->reset_gpio, err); - return err; - } + tegra_usb_phy_power_off(phy); - err = gpio_direction_output(phy->reset_gpio, 0); - if (err < 0) { - dev_err(phy->u_phy.dev, - "GPIO %d direction not set to output: %d\n", - phy->reset_gpio, err); - return err; - } + if (!phy->is_ulpi_phy) + utmip_pad_close(phy); - phy->ulpi = otg_ulpi_create(&ulpi_viewport_access_ops, 0); - if (!phy->ulpi) { - dev_err(phy->u_phy.dev, "Failed to create ULPI OTG\n"); - err = -ENOMEM; - return err; - } + regulator_disable(phy->vbus); + clk_disable_unprepare(phy->pll_u); - phy->ulpi->io_priv = phy->regs + ULPI_VIEWPORT; - return 0; + phy->freq = NULL; } -static int tegra_usb_phy_init(struct tegra_usb_phy *phy) +static int tegra_usb_phy_set_suspend(struct usb_phy *u_phy, int suspend) { + struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy); + + if (WARN_ON(!phy->freq)) + return -EINVAL; + + if (suspend) + return tegra_usb_phy_power_off(phy); + else + return tegra_usb_phy_power_on(phy); +} + +static int tegra_usb_phy_init(struct usb_phy *u_phy) +{ + struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy); unsigned long parent_rate; - int i; + unsigned int i; int err; - phy->pll_u = devm_clk_get(phy->u_phy.dev, "pll_u"); - if (IS_ERR(phy->pll_u)) { - err = PTR_ERR(phy->pll_u); - dev_err(phy->u_phy.dev, - "Failed to get pll_u clock: %d\n", err); - return err; - } + if (WARN_ON(phy->freq)) + return 0; err = clk_prepare_enable(phy->pll_u); if (err) @@ -864,64 +863,74 @@ static int tegra_usb_phy_init(struct tegra_usb_phy *phy) dev_err(phy->u_phy.dev, "Invalid pll_u parent rate %ld\n", parent_rate); err = -EINVAL; - goto fail; + goto disable_clk; } - if (!IS_ERR(phy->vbus)) { - err = regulator_enable(phy->vbus); - if (err) { - dev_err(phy->u_phy.dev, - "Failed to enable USB VBUS regulator: %d\n", - err); - goto fail; - } + err = regulator_enable(phy->vbus); + if (err) { + dev_err(phy->u_phy.dev, + "Failed to enable USB VBUS regulator: %d\n", err); + goto disable_clk; } - if (phy->is_ulpi_phy) - err = ulpi_open(phy); - else + if (!phy->is_ulpi_phy) { err = utmip_pad_open(phy); - if (err < 0) - goto fail; + if (err) + goto disable_vbus; + } + + err = tegra_usb_phy_power_on(phy); + if (err) + goto close_phy; return 0; -fail: +close_phy: + if (!phy->is_ulpi_phy) + utmip_pad_close(phy); + +disable_vbus: + regulator_disable(phy->vbus); + +disable_clk: clk_disable_unprepare(phy->pll_u); + + phy->freq = NULL; + return err; } -void tegra_usb_phy_preresume(struct usb_phy *x) +void tegra_usb_phy_preresume(struct usb_phy *u_phy) { - struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); + struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy); if (!phy->is_ulpi_phy) utmi_phy_preresume(phy); } EXPORT_SYMBOL_GPL(tegra_usb_phy_preresume); -void tegra_usb_phy_postresume(struct usb_phy *x) +void tegra_usb_phy_postresume(struct usb_phy *u_phy) { - struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); + struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy); if (!phy->is_ulpi_phy) utmi_phy_postresume(phy); } EXPORT_SYMBOL_GPL(tegra_usb_phy_postresume); -void tegra_ehci_phy_restore_start(struct usb_phy *x, - enum tegra_usb_phy_port_speed port_speed) +void tegra_ehci_phy_restore_start(struct usb_phy *u_phy, + enum tegra_usb_phy_port_speed port_speed) { - struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); + struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy); if (!phy->is_ulpi_phy) utmi_phy_restore_start(phy, port_speed); } EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_start); -void tegra_ehci_phy_restore_end(struct usb_phy *x) +void tegra_ehci_phy_restore_end(struct usb_phy *u_phy) { - struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); + struct tegra_usb_phy *phy = to_tegra_usb_phy(u_phy); if (!phy->is_ulpi_phy) utmi_phy_restore_end(phy); @@ -932,21 +941,25 @@ static int read_utmi_param(struct platform_device *pdev, const char *param, u8 *dest) { u32 value; - int err = of_property_read_u32(pdev->dev.of_node, param, &value); - *dest = (u8)value; - if (err < 0) + int err; + + err = of_property_read_u32(pdev->dev.of_node, param, &value); + if (err) dev_err(&pdev->dev, "Failed to read USB UTMI parameter %s: %d\n", param, err); + else + *dest = value; + return err; } static int utmi_phy_probe(struct tegra_usb_phy *tegra_phy, struct platform_device *pdev) { + struct tegra_utmip_config *config; struct resource *res; int err; - struct tegra_utmip_config *config; tegra_phy->is_ulpi_phy = false; @@ -957,7 +970,7 @@ static int utmi_phy_probe(struct tegra_usb_phy *tegra_phy, } tegra_phy->pad_regs = devm_ioremap(&pdev->dev, res->start, - resource_size(res)); + resource_size(res)); if (!tegra_phy->pad_regs) { dev_err(&pdev->dev, "Failed to remap UTMI pad regs\n"); return -ENOMEM; @@ -971,49 +984,49 @@ static int utmi_phy_probe(struct tegra_usb_phy *tegra_phy, config = tegra_phy->config; err = read_utmi_param(pdev, "nvidia,hssync-start-delay", - &config->hssync_start_delay); - if (err < 0) + &config->hssync_start_delay); + if (err) return err; err = read_utmi_param(pdev, "nvidia,elastic-limit", - &config->elastic_limit); - if (err < 0) + &config->elastic_limit); + if (err) return err; err = read_utmi_param(pdev, "nvidia,idle-wait-delay", - &config->idle_wait_delay); - if (err < 0) + &config->idle_wait_delay); + if (err) return err; err = read_utmi_param(pdev, "nvidia,term-range-adj", - &config->term_range_adj); - if (err < 0) + &config->term_range_adj); + if (err) return err; err = read_utmi_param(pdev, "nvidia,xcvr-lsfslew", - &config->xcvr_lsfslew); - if (err < 0) + &config->xcvr_lsfslew); + if (err) return err; err = read_utmi_param(pdev, "nvidia,xcvr-lsrslew", - &config->xcvr_lsrslew); - if (err < 0) + &config->xcvr_lsrslew); + if (err) return err; if (tegra_phy->soc_config->requires_extra_tuning_parameters) { err = read_utmi_param(pdev, "nvidia,xcvr-hsslew", - &config->xcvr_hsslew); - if (err < 0) + &config->xcvr_hsslew); + if (err) return err; err = read_utmi_param(pdev, "nvidia,hssquelch-level", - &config->hssquelch_level); - if (err < 0) + &config->hssquelch_level); + if (err) return err; err = read_utmi_param(pdev, "nvidia,hsdiscon-level", - &config->hsdiscon_level); - if (err < 0) + &config->hsdiscon_level); + if (err) return err; } @@ -1022,8 +1035,8 @@ static int utmi_phy_probe(struct tegra_usb_phy *tegra_phy, if (!config->xcvr_setup_use_fuses) { err = read_utmi_param(pdev, "nvidia,xcvr-setup", - &config->xcvr_setup); - if (err < 0) + &config->xcvr_setup); + if (err) return err; } @@ -1053,23 +1066,20 @@ MODULE_DEVICE_TABLE(of, tegra_usb_phy_id_table); static int tegra_usb_phy_probe(struct platform_device *pdev) { - const struct of_device_id *match; - struct resource *res; - struct tegra_usb_phy *tegra_phy = NULL; struct device_node *np = pdev->dev.of_node; + struct tegra_usb_phy *tegra_phy; enum usb_phy_interface phy_type; + struct reset_control *reset; + struct gpio_desc *gpiod; + struct resource *res; + struct usb_phy *phy; int err; tegra_phy = devm_kzalloc(&pdev->dev, sizeof(*tegra_phy), GFP_KERNEL); if (!tegra_phy) return -ENOMEM; - match = of_match_device(tegra_usb_phy_id_table, &pdev->dev); - if (!match) { - dev_err(&pdev->dev, "Error: No device match found\n"); - return -ENODEV; - } - tegra_phy->soc_config = match->data; + tegra_phy->soc_config = of_device_get_match_data(&pdev->dev); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { @@ -1078,7 +1088,7 @@ static int tegra_usb_phy_probe(struct platform_device *pdev) } tegra_phy->regs = devm_ioremap(&pdev->dev, res->start, - resource_size(res)); + resource_size(res)); if (!tegra_phy->regs) { dev_err(&pdev->dev, "Failed to remap I/O memory\n"); return -ENOMEM; @@ -1087,25 +1097,86 @@ static int tegra_usb_phy_probe(struct platform_device *pdev) tegra_phy->is_legacy_phy = of_property_read_bool(np, "nvidia,has-legacy-mode"); + if (of_find_property(np, "dr_mode", NULL)) + tegra_phy->mode = usb_get_dr_mode(&pdev->dev); + else + tegra_phy->mode = USB_DR_MODE_HOST; + + if (tegra_phy->mode == USB_DR_MODE_UNKNOWN) { + dev_err(&pdev->dev, "dr_mode is invalid\n"); + return -EINVAL; + } + + /* On some boards, the VBUS regulator doesn't need to be controlled */ + tegra_phy->vbus = devm_regulator_get(&pdev->dev, "vbus"); + if (IS_ERR(tegra_phy->vbus)) + return PTR_ERR(tegra_phy->vbus); + + tegra_phy->pll_u = devm_clk_get(&pdev->dev, "pll_u"); + err = PTR_ERR_OR_ZERO(tegra_phy->pll_u); + if (err) { + dev_err(&pdev->dev, "Failed to get pll_u clock: %d\n", err); + return err; + } + phy_type = of_usb_get_phy_mode(np); switch (phy_type) { case USBPHY_INTERFACE_MODE_UTMI: err = utmi_phy_probe(tegra_phy, pdev); - if (err < 0) + if (err) return err; + + tegra_phy->pad_clk = devm_clk_get(&pdev->dev, "utmi-pads"); + err = PTR_ERR_OR_ZERO(tegra_phy->pad_clk); + if (err) { + dev_err(&pdev->dev, + "Failed to get UTMIP pad clock: %d\n", err); + return err; + } + + reset = devm_reset_control_get_optional_shared(&pdev->dev, + "utmi-pads"); + err = PTR_ERR_OR_ZERO(reset); + if (err) { + dev_err(&pdev->dev, + "Failed to get UTMI-pads reset: %d\n", err); + return err; + } + tegra_phy->pad_rst = reset; break; case USBPHY_INTERFACE_MODE_ULPI: tegra_phy->is_ulpi_phy = true; - tegra_phy->reset_gpio = - of_get_named_gpio(np, "nvidia,phy-reset-gpio", 0); - if (!gpio_is_valid(tegra_phy->reset_gpio)) { + tegra_phy->clk = devm_clk_get(&pdev->dev, "ulpi-link"); + err = PTR_ERR_OR_ZERO(tegra_phy->clk); + if (err) { + dev_err(&pdev->dev, + "Failed to get ULPI clock: %d\n", err); + return err; + } + + gpiod = devm_gpiod_get_from_of_node(&pdev->dev, np, + "nvidia,phy-reset-gpio", + 0, GPIOD_OUT_HIGH, + "ulpi_phy_reset_b"); + err = PTR_ERR_OR_ZERO(gpiod); + if (err) { dev_err(&pdev->dev, - "Invalid GPIO: %d\n", tegra_phy->reset_gpio); - return tegra_phy->reset_gpio; + "Request failed for reset GPIO: %d\n", err); + return err; + } + tegra_phy->reset_gpio = gpiod; + + phy = devm_otg_ulpi_create(&pdev->dev, + &ulpi_viewport_access_ops, 0); + if (!phy) { + dev_err(&pdev->dev, "Failed to create ULPI OTG\n"); + return -ENOMEM; } - tegra_phy->config = NULL; + + tegra_phy->ulpi = phy; + tegra_phy->ulpi->io_priv = tegra_phy->regs + ULPI_VIEWPORT; break; default: @@ -1114,40 +1185,16 @@ static int tegra_usb_phy_probe(struct platform_device *pdev) return -EINVAL; } - if (of_find_property(np, "dr_mode", NULL)) - tegra_phy->mode = usb_get_dr_mode(&pdev->dev); - else - tegra_phy->mode = USB_DR_MODE_HOST; - - if (tegra_phy->mode == USB_DR_MODE_UNKNOWN) { - dev_err(&pdev->dev, "dr_mode is invalid\n"); - return -EINVAL; - } - - /* On some boards, the VBUS regulator doesn't need to be controlled */ - if (of_find_property(np, "vbus-supply", NULL)) { - tegra_phy->vbus = devm_regulator_get(&pdev->dev, "vbus"); - if (IS_ERR(tegra_phy->vbus)) - return PTR_ERR(tegra_phy->vbus); - } else { - dev_notice(&pdev->dev, "no vbus regulator"); - tegra_phy->vbus = ERR_PTR(-ENODEV); - } - tegra_phy->u_phy.dev = &pdev->dev; - err = tegra_usb_phy_init(tegra_phy); - if (err < 0) - return err; - - tegra_phy->u_phy.set_suspend = tegra_usb_phy_suspend; + tegra_phy->u_phy.init = tegra_usb_phy_init; + tegra_phy->u_phy.shutdown = tegra_usb_phy_shutdown; + tegra_phy->u_phy.set_suspend = tegra_usb_phy_set_suspend; platform_set_drvdata(pdev, tegra_phy); err = usb_add_phy_dev(&tegra_phy->u_phy); - if (err < 0) { - tegra_usb_phy_close(tegra_phy); + if (err) return err; - } return 0; } @@ -1157,7 +1204,6 @@ static int tegra_usb_phy_remove(struct platform_device *pdev) struct tegra_usb_phy *tegra_phy = platform_get_drvdata(pdev); usb_remove_phy(&tegra_phy->u_phy); - tegra_usb_phy_close(tegra_phy); return 0; } diff --git a/drivers/usb/phy/phy-ulpi.c b/drivers/usb/phy/phy-ulpi.c index a43c49369a60..e683a37e3a7a 100644 --- a/drivers/usb/phy/phy-ulpi.c +++ b/drivers/usb/phy/phy-ulpi.c @@ -240,6 +240,21 @@ static int ulpi_set_vbus(struct usb_otg *otg, bool on) return usb_phy_io_write(phy, flags, ULPI_OTG_CTRL); } +static void otg_ulpi_init(struct usb_phy *phy, struct usb_otg *otg, + struct usb_phy_io_ops *ops, + unsigned int flags) +{ + phy->label = "ULPI"; + phy->flags = flags; + phy->io_ops = ops; + phy->otg = otg; + phy->init = ulpi_init; + + otg->usb_phy = phy; + otg->set_host = ulpi_set_host; + otg->set_vbus = ulpi_set_vbus; +} + struct usb_phy * otg_ulpi_create(struct usb_phy_io_ops *ops, unsigned int flags) @@ -257,17 +272,32 @@ otg_ulpi_create(struct usb_phy_io_ops *ops, return NULL; } - phy->label = "ULPI"; - phy->flags = flags; - phy->io_ops = ops; - phy->otg = otg; - phy->init = ulpi_init; - - otg->usb_phy = phy; - otg->set_host = ulpi_set_host; - otg->set_vbus = ulpi_set_vbus; + otg_ulpi_init(phy, otg, ops, flags); return phy; } EXPORT_SYMBOL_GPL(otg_ulpi_create); +struct usb_phy * +devm_otg_ulpi_create(struct device *dev, + struct usb_phy_io_ops *ops, + unsigned int flags) +{ + struct usb_phy *phy; + struct usb_otg *otg; + + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); + if (!phy) + return NULL; + + otg = devm_kzalloc(dev, sizeof(*otg), GFP_KERNEL); + if (!otg) { + devm_kfree(dev, phy); + return NULL; + } + + otg_ulpi_init(phy, otg, ops, flags); + + return phy; +} +EXPORT_SYMBOL_GPL(devm_otg_ulpi_create); diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c index 0277f62739a2..ad2554630889 100644 --- a/drivers/usb/phy/phy.c +++ b/drivers/usb/phy/phy.c @@ -34,6 +34,14 @@ struct phy_devm { struct notifier_block *nb; }; +static const char *const usb_chger_type[] = { + [UNKNOWN_TYPE] = "USB_CHARGER_UNKNOWN_TYPE", + [SDP_TYPE] = "USB_CHARGER_SDP_TYPE", + [CDP_TYPE] = "USB_CHARGER_CDP_TYPE", + [DCP_TYPE] = "USB_CHARGER_DCP_TYPE", + [ACA_TYPE] = "USB_CHARGER_ACA_TYPE", +}; + static struct usb_phy *__usb_find_phy(struct list_head *list, enum usb_phy_type type) { @@ -98,7 +106,8 @@ static void usb_phy_notify_charger_work(struct work_struct *work) { struct usb_phy *usb_phy = container_of(work, struct usb_phy, chg_work); char uchger_state[50] = { 0 }; - char *envp[] = { uchger_state, NULL }; + char uchger_type[50] = { 0 }; + char *envp[] = { uchger_state, uchger_type, NULL }; unsigned int min, max; switch (usb_phy->chg_state) { @@ -122,6 +131,8 @@ static void usb_phy_notify_charger_work(struct work_struct *work) return; } + snprintf(uchger_type, ARRAY_SIZE(uchger_type), + "USB_CHARGER_TYPE=%s", usb_chger_type[usb_phy->chg_type]); kobject_uevent_env(&usb_phy->dev->kobj, KOBJ_CHANGE, envp); } diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c index d438b7871446..3af91b2b8f76 100644 --- a/drivers/usb/renesas_usbhs/common.c +++ b/drivers/usb/renesas_usbhs/common.c @@ -8,11 +8,10 @@ */ #include <linux/clk.h> #include <linux/err.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/io.h> #include <linux/module.h> #include <linux/of_device.h> -#include <linux/of_gpio.h> #include <linux/pm_runtime.h> #include <linux/reset.h> #include <linux/slab.h> @@ -592,7 +591,8 @@ static int usbhs_probe(struct platform_device *pdev) struct usbhs_priv *priv; struct resource *irq_res; struct device *dev = &pdev->dev; - int ret, gpio; + struct gpio_desc *gpiod; + int ret; u32 tmp; /* check device node */ @@ -657,10 +657,9 @@ static int usbhs_probe(struct platform_device *pdev) priv->dparam.pio_dma_border = 64; /* 64byte */ if (!of_property_read_u32(dev_of_node(dev), "renesas,buswait", &tmp)) priv->dparam.buswait_bwait = tmp; - gpio = of_get_named_gpio_flags(dev_of_node(dev), "renesas,enable-gpio", - 0, NULL); - if (gpio > 0) - priv->dparam.enable_gpio = gpio; + gpiod = devm_gpiod_get_optional(dev, "renesas,enable", GPIOD_IN); + if (IS_ERR(gpiod)) + return PTR_ERR(gpiod); /* FIXME */ /* runtime power control ? */ @@ -708,13 +707,10 @@ static int usbhs_probe(struct platform_device *pdev) usbhs_sys_clock_ctrl(priv, 0); /* check GPIO determining if USB function should be enabled */ - if (priv->dparam.enable_gpio) { - gpio_request_one(priv->dparam.enable_gpio, GPIOF_IN, NULL); - ret = !gpio_get_value(priv->dparam.enable_gpio); - gpio_free(priv->dparam.enable_gpio); + if (gpiod) { + ret = !gpiod_get_value(gpiod); if (ret) { - dev_warn(dev, "USB function not selected (GPIO %d)\n", - priv->dparam.enable_gpio); + dev_warn(dev, "USB function not selected (GPIO)\n"); ret = -ENOTSUPP; goto probe_end_mod_exit; } diff --git a/drivers/usb/renesas_usbhs/rcar2.c b/drivers/usb/renesas_usbhs/rcar2.c index 440d213e1749..52756fc2ac9c 100644 --- a/drivers/usb/renesas_usbhs/rcar2.c +++ b/drivers/usb/renesas_usbhs/rcar2.c @@ -6,8 +6,6 @@ * Copyright (C) 2019 Renesas Electronics Corporation */ -#include <linux/gpio.h> -#include <linux/of_gpio.h> #include <linux/phy/phy.h> #include "common.h" #include "rcar2.h" @@ -34,7 +32,7 @@ static int usbhs_rcar2_hardware_exit(struct platform_device *pdev) struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); if (priv->phy) { - phy_put(priv->phy); + phy_put(&pdev->dev, priv->phy); priv->phy = NULL; } diff --git a/drivers/usb/renesas_usbhs/rza2.c b/drivers/usb/renesas_usbhs/rza2.c index 021749594389..3eed3334a17f 100644 --- a/drivers/usb/renesas_usbhs/rza2.c +++ b/drivers/usb/renesas_usbhs/rza2.c @@ -29,7 +29,7 @@ static int usbhs_rza2_hardware_exit(struct platform_device *pdev) { struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); - phy_put(priv->phy); + phy_put(&pdev->dev, priv->phy); priv->phy = NULL; return 0; diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index ed4a18b435a0..25d7e0c36d38 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -129,9 +129,6 @@ config USB_SERIAL_DIGI_ACCELEPORT parallel port on the USB 2 appears as a third serial port on Linux. The Digi Acceleport USB 8 is not yet supported by this driver. - This driver works under SMP with the usb-uhci driver. It does not - work under SMP with the uhci driver. - To compile this driver as a module, choose M here: the module will be called digi_acceleport. diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index ebd76ab07b72..821970609695 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -276,7 +276,7 @@ static void cyberjack_read_int_callback(struct urb *urb) old_rdtodo = priv->rdtodo; if (old_rdtodo > SHRT_MAX - size) { - dev_dbg(dev, "To many bulk_in urbs to do.\n"); + dev_dbg(dev, "Too many bulk_in urbs to do.\n"); spin_unlock_irqrestore(&priv->lock, flags); goto resubmit; } diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 633550ec3025..ffd984142171 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -104,7 +104,7 @@ struct garmin_packet { int seq; /* the real size of the data array, always > 0 */ int size; - __u8 data[1]; + __u8 data[]; }; /* structure used to keep the current state of the driver */ diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index 302eb9530859..79d0586e2b33 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -45,9 +45,10 @@ static int buffer_size; static int xbof = -1; static int ir_startup (struct usb_serial *serial); -static int ir_open(struct tty_struct *tty, struct usb_serial_port *port); -static int ir_prepare_write_buffer(struct usb_serial_port *port, - void *dest, size_t size); +static int ir_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count); +static int ir_write_room(struct tty_struct *tty); +static void ir_write_bulk_callback(struct urb *urb); static void ir_process_read_urb(struct urb *urb); static void ir_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios); @@ -75,10 +76,13 @@ static struct usb_serial_driver ir_device = { .description = "IR Dongle", .id_table = ir_id_table, .num_ports = 1, + .num_bulk_in = 1, + .num_bulk_out = 1, .set_termios = ir_set_termios, .attach = ir_startup, - .open = ir_open, - .prepare_write_buffer = ir_prepare_write_buffer, + .write = ir_write, + .write_room = ir_write_room, + .write_bulk_callback = ir_write_bulk_callback, .process_read_urb = ir_process_read_urb, }; @@ -251,35 +255,102 @@ static int ir_startup(struct usb_serial *serial) return 0; } -static int ir_open(struct tty_struct *tty, struct usb_serial_port *port) +static int ir_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count) { - int i; + struct urb *urb = NULL; + unsigned long flags; + int ret; - for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) - port->write_urbs[i]->transfer_flags = URB_ZERO_PACKET; + if (port->bulk_out_size == 0) + return -EINVAL; - /* Start reading from the device */ - return usb_serial_generic_open(tty, port); -} + if (count == 0) + return 0; -static int ir_prepare_write_buffer(struct usb_serial_port *port, - void *dest, size_t size) -{ - unsigned char *buf = dest; - int count; + count = min(count, port->bulk_out_size - 1); + + spin_lock_irqsave(&port->lock, flags); + if (__test_and_clear_bit(0, &port->write_urbs_free)) { + urb = port->write_urbs[0]; + port->tx_bytes += count; + } + spin_unlock_irqrestore(&port->lock, flags); + + if (!urb) + return 0; /* * The first byte of the packet we send to the device contains an - * inbound header which indicates an additional number of BOFs and + * outbound header which indicates an additional number of BOFs and * a baud rate change. * * See section 5.4.2.2 of the USB IrDA spec. */ - *buf = ir_xbof | ir_baud; + *(u8 *)urb->transfer_buffer = ir_xbof | ir_baud; + + memcpy(urb->transfer_buffer + 1, buf, count); + + urb->transfer_buffer_length = count + 1; + urb->transfer_flags = URB_ZERO_PACKET; + + ret = usb_submit_urb(urb, GFP_ATOMIC); + if (ret) { + dev_err(&port->dev, "failed to submit write urb: %d\n", ret); + + spin_lock_irqsave(&port->lock, flags); + __set_bit(0, &port->write_urbs_free); + port->tx_bytes -= count; + spin_unlock_irqrestore(&port->lock, flags); + + return ret; + } + + return count; +} + +static void ir_write_bulk_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + int status = urb->status; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + __set_bit(0, &port->write_urbs_free); + port->tx_bytes -= urb->transfer_buffer_length - 1; + spin_unlock_irqrestore(&port->lock, flags); + + switch (status) { + case 0: + break; + case -ENOENT: + case -ECONNRESET: + case -ESHUTDOWN: + dev_dbg(&port->dev, "write urb stopped: %d\n", status); + return; + case -EPIPE: + dev_err(&port->dev, "write urb stopped: %d\n", status); + return; + default: + dev_err(&port->dev, "nonzero write-urb status: %d\n", status); + break; + } + + usb_serial_port_softint(port); +} - count = kfifo_out_locked(&port->write_fifo, buf + 1, size - 1, - &port->lock); - return count + 1; +static int ir_write_room(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + int count = 0; + + if (port->bulk_out_size == 0) + return 0; + + if (test_bit(0, &port->write_urbs_free)) + count = port->bulk_out_size - 1; + + return count; } static void ir_process_read_urb(struct urb *urb) @@ -304,23 +375,15 @@ static void ir_process_read_urb(struct urb *urb) tty_flip_buffer_push(&port->port); } -static void ir_set_termios_callback(struct urb *urb) -{ - kfree(urb->transfer_buffer); - - if (urb->status) - dev_dbg(&urb->dev->dev, "%s - non-zero urb status: %d\n", - __func__, urb->status); -} - static void ir_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { - struct urb *urb; + struct usb_device *udev = port->serial->dev; unsigned char *transfer_buffer; - int result; + int actual_length; speed_t baud; int ir_baud; + int ret; baud = tty_get_baud_rate(tty); @@ -332,34 +395,34 @@ static void ir_set_termios(struct tty_struct *tty, switch (baud) { case 2400: - ir_baud = USB_IRDA_BR_2400; + ir_baud = USB_IRDA_LS_2400; break; case 9600: - ir_baud = USB_IRDA_BR_9600; + ir_baud = USB_IRDA_LS_9600; break; case 19200: - ir_baud = USB_IRDA_BR_19200; + ir_baud = USB_IRDA_LS_19200; break; case 38400: - ir_baud = USB_IRDA_BR_38400; + ir_baud = USB_IRDA_LS_38400; break; case 57600: - ir_baud = USB_IRDA_BR_57600; + ir_baud = USB_IRDA_LS_57600; break; case 115200: - ir_baud = USB_IRDA_BR_115200; + ir_baud = USB_IRDA_LS_115200; break; case 576000: - ir_baud = USB_IRDA_BR_576000; + ir_baud = USB_IRDA_LS_576000; break; case 1152000: - ir_baud = USB_IRDA_BR_1152000; + ir_baud = USB_IRDA_LS_1152000; break; case 4000000: - ir_baud = USB_IRDA_BR_4000000; + ir_baud = USB_IRDA_LS_4000000; break; default: - ir_baud = USB_IRDA_BR_9600; + ir_baud = USB_IRDA_LS_9600; baud = 9600; } @@ -375,42 +438,22 @@ static void ir_set_termios(struct tty_struct *tty, /* * send the baud change out on an "empty" data packet */ - urb = usb_alloc_urb(0, GFP_KERNEL); - if (!urb) - return; - transfer_buffer = kmalloc(1, GFP_KERNEL); if (!transfer_buffer) - goto err_buf; + return; *transfer_buffer = ir_xbof | ir_baud; - usb_fill_bulk_urb( - urb, - port->serial->dev, - usb_sndbulkpipe(port->serial->dev, - port->bulk_out_endpointAddress), - transfer_buffer, - 1, - ir_set_termios_callback, - port); - - urb->transfer_flags = URB_ZERO_PACKET; - - result = usb_submit_urb(urb, GFP_KERNEL); - if (result) { - dev_err(&port->dev, "%s - failed to submit urb: %d\n", - __func__, result); - goto err_subm; + ret = usb_bulk_msg(udev, + usb_sndbulkpipe(udev, port->bulk_out_endpointAddress), + transfer_buffer, 1, &actual_length, 5000); + if (ret || actual_length != 1) { + if (actual_length != 1) + ret = -EIO; + dev_err(&port->dev, "failed to change line speed: %d\n", ret); } - usb_free_urb(urb); - - return; -err_subm: kfree(transfer_buffer); -err_buf: - usb_free_urb(urb); } static int __init ir_init(void) diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index ed2b4e6dca38..0af76800bd78 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -41,6 +41,9 @@ struct opticon_private { bool rts; bool cts; int outstanding_urbs; + int outstanding_bytes; + + struct usb_anchor anchor; }; @@ -149,6 +152,15 @@ static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port) return res; } +static void opticon_close(struct usb_serial_port *port) +{ + struct opticon_private *priv = usb_get_serial_port_data(port); + + usb_kill_anchored_urbs(&priv->anchor); + + usb_serial_generic_close(port); +} + static void opticon_write_control_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; @@ -169,6 +181,7 @@ static void opticon_write_control_callback(struct urb *urb) spin_lock_irqsave(&priv->lock, flags); --priv->outstanding_urbs; + priv->outstanding_bytes -= urb->transfer_buffer_length; spin_unlock_irqrestore(&priv->lock, flags); usb_serial_port_softint(port); @@ -182,8 +195,8 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port, struct urb *urb; unsigned char *buffer; unsigned long flags; - int status; struct usb_ctrlrequest *dr; + int ret = -ENOMEM; spin_lock_irqsave(&priv->lock, flags); if (priv->outstanding_urbs > URB_UPPER_LIMIT) { @@ -192,19 +205,16 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port, return 0; } priv->outstanding_urbs++; + priv->outstanding_bytes += count; spin_unlock_irqrestore(&priv->lock, flags); buffer = kmalloc(count, GFP_ATOMIC); - if (!buffer) { - count = -ENOMEM; + if (!buffer) goto error_no_buffer; - } urb = usb_alloc_urb(0, GFP_ATOMIC); - if (!urb) { - count = -ENOMEM; + if (!urb) goto error_no_urb; - } memcpy(buffer, buf, count); @@ -213,10 +223,8 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port, /* The connected devices do not have a bulk write endpoint, * to transmit data to de barcode device the control endpoint is used */ dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC); - if (!dr) { - count = -ENOMEM; + if (!dr) goto error_no_dr; - } dr->bRequestType = USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT; dr->bRequest = 0x01; @@ -229,13 +237,13 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port, (unsigned char *)dr, buffer, count, opticon_write_control_callback, port); + usb_anchor_urb(urb, &priv->anchor); + /* send it down the pipe */ - status = usb_submit_urb(urb, GFP_ATOMIC); - if (status) { - dev_err(&port->dev, - "%s - usb_submit_urb(write endpoint) failed status = %d\n", - __func__, status); - count = status; + ret = usb_submit_urb(urb, GFP_ATOMIC); + if (ret) { + dev_err(&port->dev, "failed to submit write urb: %d\n", ret); + usb_unanchor_urb(urb); goto error; } @@ -253,8 +261,10 @@ error_no_urb: error_no_buffer: spin_lock_irqsave(&priv->lock, flags); --priv->outstanding_urbs; + priv->outstanding_bytes -= count; spin_unlock_irqrestore(&priv->lock, flags); - return count; + + return ret; } static int opticon_write_room(struct tty_struct *tty) @@ -279,6 +289,20 @@ static int opticon_write_room(struct tty_struct *tty) return 2048; } +static int opticon_chars_in_buffer(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct opticon_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + int count; + + spin_lock_irqsave(&priv->lock, flags); + count = priv->outstanding_bytes; + spin_unlock_irqrestore(&priv->lock, flags); + + return count; +} + static int opticon_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; @@ -354,6 +378,7 @@ static int opticon_port_probe(struct usb_serial_port *port) return -ENOMEM; spin_lock_init(&priv->lock); + init_usb_anchor(&priv->anchor); usb_set_serial_port_data(port, priv); @@ -381,8 +406,10 @@ static struct usb_serial_driver opticon_device = { .port_probe = opticon_port_probe, .port_remove = opticon_port_remove, .open = opticon_open, + .close = opticon_close, .write = opticon_write, .write_room = opticon_write_room, + .chars_in_buffer = opticon_chars_in_buffer, .throttle = usb_serial_generic_throttle, .unthrottle = usb_serial_generic_unthrottle, .get_serial = get_serial_info, diff --git a/drivers/usb/typec/altmodes/displayport.c b/drivers/usb/typec/altmodes/displayport.c index 4092248a5936..0edfb89e04a8 100644 --- a/drivers/usb/typec/altmodes/displayport.c +++ b/drivers/usb/typec/altmodes/displayport.c @@ -188,7 +188,7 @@ static void dp_altmode_work(struct work_struct *work) switch (dp->state) { case DP_STATE_ENTER: - ret = typec_altmode_enter(dp->alt); + ret = typec_altmode_enter(dp->alt, NULL); if (ret) dev_err(&dp->alt->dev, "failed to enter mode\n"); break; @@ -306,7 +306,8 @@ err_unlock: static int dp_altmode_activate(struct typec_altmode *alt, int activate) { - return activate ? typec_altmode_enter(alt) : typec_altmode_exit(alt); + return activate ? typec_altmode_enter(alt, NULL) : + typec_altmode_exit(alt); } static const struct typec_altmode_ops dp_altmode_ops = { diff --git a/drivers/usb/typec/bus.c b/drivers/usb/typec/bus.c index 74cb3c2ecb34..2e45eb479386 100644 --- a/drivers/usb/typec/bus.c +++ b/drivers/usb/typec/bus.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -/** +/* * Bus for USB Type-C Alternate Modes * * Copyright (C) 2018 Intel Corporation @@ -10,12 +10,23 @@ #include "bus.h" -static inline int typec_altmode_set_mux(struct altmode *alt, u8 state) +static inline int +typec_altmode_set_mux(struct altmode *alt, unsigned long conf, void *data) { - return alt->mux ? alt->mux->set(alt->mux, state) : 0; + struct typec_mux_state state; + + if (!alt->mux) + return 0; + + state.alt = &alt->adev; + state.mode = conf; + state.data = data; + + return alt->mux->set(alt->mux, &state); } -static int typec_altmode_set_state(struct typec_altmode *adev, int state) +static int typec_altmode_set_state(struct typec_altmode *adev, + unsigned long conf, void *data) { bool is_port = is_typec_port(adev->dev.parent); struct altmode *port_altmode; @@ -23,11 +34,11 @@ static int typec_altmode_set_state(struct typec_altmode *adev, int state) port_altmode = is_port ? to_altmode(adev) : to_altmode(adev)->partner; - ret = typec_altmode_set_mux(port_altmode, state); + ret = typec_altmode_set_mux(port_altmode, conf, data); if (ret) return ret; - blocking_notifier_call_chain(&port_altmode->nh, state, NULL); + blocking_notifier_call_chain(&port_altmode->nh, conf, NULL); return 0; } @@ -67,7 +78,7 @@ int typec_altmode_notify(struct typec_altmode *adev, is_port = is_typec_port(adev->dev.parent); partner = altmode->partner; - ret = typec_altmode_set_mux(is_port ? altmode : partner, (u8)conf); + ret = typec_altmode_set_mux(is_port ? altmode : partner, conf, data); if (ret) return ret; @@ -84,12 +95,14 @@ EXPORT_SYMBOL_GPL(typec_altmode_notify); /** * typec_altmode_enter - Enter Mode * @adev: The alternate mode + * @vdo: VDO for the Enter Mode command * * The alternate mode drivers use this function to enter mode. The port drivers * use this to inform the alternate mode drivers that the partner has initiated - * Enter Mode command. + * Enter Mode command. If the alternate mode does not require VDO, @vdo must be + * NULL. */ -int typec_altmode_enter(struct typec_altmode *adev) +int typec_altmode_enter(struct typec_altmode *adev, u32 *vdo) { struct altmode *partner = to_altmode(adev)->partner; struct typec_altmode *pdev = &partner->adev; @@ -101,13 +114,16 @@ int typec_altmode_enter(struct typec_altmode *adev) if (!pdev->ops || !pdev->ops->enter) return -EOPNOTSUPP; + if (is_typec_port(pdev->dev.parent) && !pdev->active) + return -EPERM; + /* Moving to USB Safe State */ - ret = typec_altmode_set_state(adev, TYPEC_STATE_SAFE); + ret = typec_altmode_set_state(adev, TYPEC_STATE_SAFE, NULL); if (ret) return ret; /* Enter Mode */ - return pdev->ops->enter(pdev); + return pdev->ops->enter(pdev, vdo); } EXPORT_SYMBOL_GPL(typec_altmode_enter); @@ -130,7 +146,7 @@ int typec_altmode_exit(struct typec_altmode *adev) return -EOPNOTSUPP; /* Moving to USB Safe State */ - ret = typec_altmode_set_state(adev, TYPEC_STATE_SAFE); + ret = typec_altmode_set_state(adev, TYPEC_STATE_SAFE, NULL); if (ret) return ret; @@ -383,7 +399,7 @@ static int typec_remove(struct device *dev) drv->remove(to_typec_altmode(dev)); if (adev->active) { - WARN_ON(typec_altmode_set_state(adev, TYPEC_STATE_SAFE)); + WARN_ON(typec_altmode_set_state(adev, TYPEC_STATE_SAFE, NULL)); typec_altmode_update_active(adev, false); } diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c index 91d62276b56f..7c44e930602f 100644 --- a/drivers/usb/typec/class.c +++ b/drivers/usb/typec/class.c @@ -834,6 +834,52 @@ static const struct device_type typec_cable_dev_type = { .release = typec_cable_release, }; +static int cable_match(struct device *dev, void *data) +{ + return is_typec_cable(dev); +} + +/** + * typec_cable_get - Get a reference to the USB Type-C cable + * @port: The USB Type-C Port the cable is connected to + * + * The caller must decrement the reference count with typec_cable_put() after + * use. + */ +struct typec_cable *typec_cable_get(struct typec_port *port) +{ + struct device *dev; + + dev = device_find_child(&port->dev, NULL, cable_match); + if (!dev) + return NULL; + + return to_typec_cable(dev); +} +EXPORT_SYMBOL_GPL(typec_cable_get); + +/** + * typec_cable_get - Decrement the reference count on USB Type-C cable + * @cable: The USB Type-C cable + */ +void typec_cable_put(struct typec_cable *cable) +{ + put_device(&cable->dev); +} +EXPORT_SYMBOL_GPL(typec_cable_put); + +/** + * typec_cable_is_active - Check is the USB Type-C cable active or passive + * @cable: The USB Type-C Cable + * + * Return 1 if the cable is active or 0 if it's passive. + */ +int typec_cable_is_active(struct typec_cable *cable) +{ + return cable->active; +} +EXPORT_SYMBOL_GPL(typec_cable_is_active); + /** * typec_cable_set_identity - Report result from Discover Identity command * @cable: The cable updated identity values @@ -1483,7 +1529,11 @@ EXPORT_SYMBOL_GPL(typec_get_orientation); */ int typec_set_mode(struct typec_port *port, int mode) { - return port->mux ? port->mux->set(port->mux, mode) : 0; + struct typec_mux_state state = { }; + + state.mode = mode; + + return port->mux ? port->mux->set(port->mux, &state) : 0; } EXPORT_SYMBOL_GPL(typec_set_mode); diff --git a/drivers/usb/typec/mux.c b/drivers/usb/typec/mux.c index 57907f26f681..5baf0f416c73 100644 --- a/drivers/usb/typec/mux.c +++ b/drivers/usb/typec/mux.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -/** +/* * USB Type-C Multiplexer/DeMultiplexer Switch support * * Copyright (C) 2018 Intel Corporation diff --git a/drivers/usb/typec/mux/pi3usb30532.c b/drivers/usb/typec/mux/pi3usb30532.c index 5585b109095b..46457c133d2b 100644 --- a/drivers/usb/typec/mux/pi3usb30532.c +++ b/drivers/usb/typec/mux/pi3usb30532.c @@ -73,7 +73,8 @@ static int pi3usb30532_sw_set(struct typec_switch *sw, return ret; } -static int pi3usb30532_mux_set(struct typec_mux *mux, int state) +static int +pi3usb30532_mux_set(struct typec_mux *mux, struct typec_mux_state *state) { struct pi3usb30532 *pi = typec_mux_get_drvdata(mux); u8 new_conf; @@ -82,7 +83,7 @@ static int pi3usb30532_mux_set(struct typec_mux *mux, int state) mutex_lock(&pi->lock); new_conf = pi->conf; - switch (state) { + switch (state->mode) { case TYPEC_STATE_SAFE: new_conf = (new_conf & PI3USB30532_CONF_SWAP) | PI3USB30532_CONF_OPEN; diff --git a/drivers/usb/typec/tcpm/fusb302.c b/drivers/usb/typec/tcpm/fusb302.c index ed8655c6af8c..b498960ff72b 100644 --- a/drivers/usb/typec/tcpm/fusb302.c +++ b/drivers/usb/typec/tcpm/fusb302.c @@ -1666,7 +1666,7 @@ static const struct property_entry port_props[] = { PROPERTY_ENTRY_STRING("try-power-role", "sink"), PROPERTY_ENTRY_U32_ARRAY("source-pdos", src_pdo), PROPERTY_ENTRY_U32_ARRAY("sink-pdos", snk_pdo), - PROPERTY_ENTRY_U32("op-sink-microwatt", 2500), + PROPERTY_ENTRY_U32("op-sink-microwatt", 2500000), { } }; diff --git a/drivers/usb/typec/tcpm/tcpci.c b/drivers/usb/typec/tcpm/tcpci.c index 8b4ff9fff340..753645bb2527 100644 --- a/drivers/usb/typec/tcpm/tcpci.c +++ b/drivers/usb/typec/tcpm/tcpci.c @@ -591,6 +591,12 @@ static int tcpci_probe(struct i2c_client *client, static int tcpci_remove(struct i2c_client *client) { struct tcpci_chip *chip = i2c_get_clientdata(client); + int err; + + /* Disable chip interrupts before unregistering port */ + err = tcpci_write16(chip->tcpci, TCPC_ALERT_MASK, 0); + if (err < 0) + return err; tcpci_unregister_port(chip->tcpci); diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index 56fc356bc55c..f3087ef8265c 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -1475,16 +1475,16 @@ static int tcpm_validate_caps(struct tcpm_port *port, const u32 *pdo, return 0; } -static int tcpm_altmode_enter(struct typec_altmode *altmode) +static int tcpm_altmode_enter(struct typec_altmode *altmode, u32 *vdo) { struct tcpm_port *port = typec_altmode_get_drvdata(altmode); u32 header; mutex_lock(&port->lock); - header = VDO(altmode->svid, 1, CMD_ENTER_MODE); + header = VDO(altmode->svid, vdo ? 2 : 1, CMD_ENTER_MODE); header |= VDO_OPOS(altmode->mode); - tcpm_queue_vdm(port, header, NULL, 0); + tcpm_queue_vdm(port, header, vdo, vdo ? 1 : 0); mod_delayed_work(port->wq, &port->vdm_state_machine, 0); mutex_unlock(&port->lock); diff --git a/drivers/usb/typec/tcpm/wcove.c b/drivers/usb/typec/tcpm/wcove.c index edc271da14f4..9b745f432c91 100644 --- a/drivers/usb/typec/tcpm/wcove.c +++ b/drivers/usb/typec/tcpm/wcove.c @@ -597,7 +597,7 @@ static const struct property_entry wcove_props[] = { PROPERTY_ENTRY_STRING("try-power-role", "sink"), PROPERTY_ENTRY_U32_ARRAY("source-pdos", src_pdo), PROPERTY_ENTRY_U32_ARRAY("sink-pdos", snk_pdo), - PROPERTY_ENTRY_U32("op-sink-microwatt", 15000), + PROPERTY_ENTRY_U32("op-sink-microwatt", 15000000), { } }; diff --git a/drivers/usb/typec/ucsi/displayport.c b/drivers/usb/typec/ucsi/displayport.c index d4d5189edfb8..0f1273ae086c 100644 --- a/drivers/usb/typec/ucsi/displayport.c +++ b/drivers/usb/typec/ucsi/displayport.c @@ -45,7 +45,7 @@ struct ucsi_dp { * -EOPNOTSUPP. */ -static int ucsi_displayport_enter(struct typec_altmode *alt) +static int ucsi_displayport_enter(struct typec_altmode *alt, u32 *vdo) { struct ucsi_dp *dp = typec_altmode_get_drvdata(alt); struct ucsi *ucsi = dp->con->ucsi; diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c index 4459bc68aa33..d5a6aac86327 100644 --- a/drivers/usb/typec/ucsi/ucsi.c +++ b/drivers/usb/typec/ucsi/ucsi.c @@ -189,7 +189,7 @@ int ucsi_resume(struct ucsi *ucsi) u64 command; /* Restore UCSI notification enable mask after system resume */ - command = UCSI_SET_NOTIFICATION_ENABLE | UCSI_ENABLE_NTFY_ALL; + command = UCSI_SET_NOTIFICATION_ENABLE | ucsi->ntfy; return ucsi_send_command(ucsi, command, NULL, 0); } @@ -318,6 +318,82 @@ err: return ret; } +static int +ucsi_register_altmodes_nvidia(struct ucsi_connector *con, u8 recipient) +{ + int max_altmodes = UCSI_MAX_ALTMODES; + struct typec_altmode_desc desc; + struct ucsi_altmode alt; + struct ucsi_altmode orig[UCSI_MAX_ALTMODES]; + struct ucsi_altmode updated[UCSI_MAX_ALTMODES]; + struct ucsi *ucsi = con->ucsi; + bool multi_dp = false; + u64 command; + int ret; + int len; + int i; + int k = 0; + + if (recipient == UCSI_RECIPIENT_CON) + max_altmodes = con->ucsi->cap.num_alt_modes; + + memset(orig, 0, sizeof(orig)); + memset(updated, 0, sizeof(updated)); + + /* First get all the alternate modes */ + for (i = 0; i < max_altmodes; i++) { + memset(&alt, 0, sizeof(alt)); + command = UCSI_GET_ALTERNATE_MODES; + command |= UCSI_GET_ALTMODE_RECIPIENT(recipient); + command |= UCSI_GET_ALTMODE_CONNECTOR_NUMBER(con->num); + command |= UCSI_GET_ALTMODE_OFFSET(i); + len = ucsi_run_command(con->ucsi, command, &alt, sizeof(alt)); + /* + * We are collecting all altmodes first and then registering. + * Some type-C device will return zero length data beyond last + * alternate modes. We should not return if length is zero. + */ + if (len < 0) + return len; + + /* We got all altmodes, now break out and register them */ + if (!len || !alt.svid) + break; + + orig[k].mid = alt.mid; + orig[k].svid = alt.svid; + k++; + } + /* + * Update the original altmode table as some ppms may report + * multiple DP altmodes. + */ + if (recipient == UCSI_RECIPIENT_CON) + multi_dp = ucsi->ops->update_altmodes(ucsi, orig, updated); + + /* now register altmodes */ + for (i = 0; i < max_altmodes; i++) { + memset(&desc, 0, sizeof(desc)); + if (multi_dp && recipient == UCSI_RECIPIENT_CON) { + desc.svid = updated[i].svid; + desc.vdo = updated[i].mid; + } else { + desc.svid = orig[i].svid; + desc.vdo = orig[i].mid; + } + desc.roles = TYPEC_PORT_DRD; + + if (!desc.svid) + return 0; + + ret = ucsi_register_altmode(con, &desc, recipient); + if (ret) + return ret; + } + + return 0; +} + static int ucsi_register_altmodes(struct ucsi_connector *con, u8 recipient) { int max_altmodes = UCSI_MAX_ALTMODES; @@ -336,6 +412,9 @@ static int ucsi_register_altmodes(struct ucsi_connector *con, u8 recipient) if (recipient == UCSI_RECIPIENT_SOP && con->partner_altmode[0]) return 0; + if (con->ucsi->ops->update_altmodes) + return ucsi_register_altmodes_nvidia(con, recipient); + if (recipient == UCSI_RECIPIENT_CON) max_altmodes = con->ucsi->cap.num_alt_modes; @@ -589,6 +668,11 @@ void ucsi_connector_change(struct ucsi *ucsi, u8 num) { struct ucsi_connector *con = &ucsi->connector[num - 1]; + if (!(ucsi->ntfy & UCSI_ENABLE_NTFY_CONNECTOR_CHANGE)) { + dev_dbg(ucsi->dev, "Bogus connector change event\n"); + return; + } + if (!test_and_set_bit(EVENT_PENDING, &ucsi->flags)) schedule_work(&con->work); } @@ -656,7 +740,7 @@ static int ucsi_role_cmd(struct ucsi_connector *con, u64 command) ucsi_reset_ppm(con->ucsi); mutex_unlock(&con->ucsi->ppm_lock); - c = UCSI_SET_NOTIFICATION_ENABLE | UCSI_ENABLE_NTFY_ALL; + c = UCSI_SET_NOTIFICATION_ENABLE | con->ucsi->ntfy; ucsi_send_command(con->ucsi, c, NULL, 0); ucsi_reset_connector(con, true); @@ -890,8 +974,8 @@ int ucsi_init(struct ucsi *ucsi) } /* Enable basic notifications */ - command = UCSI_SET_NOTIFICATION_ENABLE; - command |= UCSI_ENABLE_NTFY_CMD_COMPLETE | UCSI_ENABLE_NTFY_ERROR; + ucsi->ntfy = UCSI_ENABLE_NTFY_CMD_COMPLETE | UCSI_ENABLE_NTFY_ERROR; + command = UCSI_SET_NOTIFICATION_ENABLE | ucsi->ntfy; ret = ucsi_run_command(ucsi, command, NULL, 0); if (ret < 0) goto err_reset; @@ -923,7 +1007,8 @@ int ucsi_init(struct ucsi *ucsi) } /* Enable all notifications */ - command = UCSI_SET_NOTIFICATION_ENABLE | UCSI_ENABLE_NTFY_ALL; + ucsi->ntfy = UCSI_ENABLE_NTFY_ALL; + command = UCSI_SET_NOTIFICATION_ENABLE | ucsi->ntfy; ret = ucsi_run_command(ucsi, command, NULL, 0); if (ret < 0) goto err_unregister; diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h index 831c9470bdc1..e434b9c9a9eb 100644 --- a/drivers/usb/typec/ucsi/ucsi.h +++ b/drivers/usb/typec/ucsi/ucsi.h @@ -11,6 +11,7 @@ /* -------------------------------------------------------------------------- */ struct ucsi; +struct ucsi_altmode; /* UCSI offsets (Bytes) */ #define UCSI_VERSION 0 @@ -35,6 +36,7 @@ struct ucsi; * @read: Read operation * @sync_write: Blocking write operation * @async_write: Non-blocking write operation + * @update_altmodes: Squashes duplicate DP altmodes * * Read and write routines for UCSI interface. @sync_write must wait for the * Command Completion Event from the PPM before returning, and @async_write must @@ -47,6 +49,8 @@ struct ucsi_operations { const void *val, size_t val_len); int (*async_write)(struct ucsi *ucsi, unsigned int offset, const void *val, size_t val_len); + bool (*update_altmodes)(struct ucsi *ucsi, struct ucsi_altmode *orig, + struct ucsi_altmode *updated); }; struct ucsi *ucsi_create(struct device *dev, const struct ucsi_operations *ops); @@ -82,6 +86,7 @@ void ucsi_connector_change(struct ucsi *ucsi, u8 num); #define UCSI_GET_ERROR_STATUS 0x13 #define UCSI_CONNECTOR_NUMBER(_num_) ((u64)(_num_) << 16) +#define UCSI_COMMAND(_cmd_) ((_cmd_) & 0xff) /* CONNECTOR_RESET command bits */ #define UCSI_CONNECTOR_RESET_HARD BIT(23) /* Deprecated in v1.1 */ @@ -140,6 +145,12 @@ void ucsi_connector_change(struct ucsi *ucsi, u8 num); #define UCSI_ERROR_PPM_POLICY_CONFLICT BIT(11) #define UCSI_ERROR_SWAP_REJECTED BIT(12) +#define UCSI_SET_NEW_CAM_ENTER(x) (((x) >> 23) & 0x1) +#define UCSI_SET_NEW_CAM_GET_AM(x) (((x) >> 24) & 0xff) +#define UCSI_SET_NEW_CAM_AM_MASK (0xff << 24) +#define UCSI_SET_NEW_CAM_SET_AM(x) (((x) & 0xff) << 24) +#define UCSI_CMD_CONNECTOR_MASK (0x7) + /* Data structure filled by PPM in response to GET_CAPABILITY command. */ struct ucsi_capability { u32 attributes; @@ -269,6 +280,9 @@ struct ucsi { /* PPM Communication lock */ struct mutex ppm_lock; + /* The latest "Notification Enable" bits (SET_NOTIFICATION_ENABLE) */ + u64 ntfy; + /* PPM communication flags */ unsigned long flags; #define EVENT_PENDING 0 diff --git a/drivers/usb/typec/ucsi/ucsi_ccg.c b/drivers/usb/typec/ucsi/ucsi_ccg.c index 3370b3fc37b1..a5b8530490db 100644 --- a/drivers/usb/typec/ucsi/ucsi_ccg.c +++ b/drivers/usb/typec/ucsi/ucsi_ccg.c @@ -16,6 +16,7 @@ #include <linux/platform_device.h> #include <linux/pm.h> #include <linux/pm_runtime.h> +#include <linux/usb/typec_dp.h> #include <asm/unaligned.h> #include "ucsi.h" @@ -173,6 +174,15 @@ struct ccg_resp { u8 length; }; +struct ucsi_ccg_altmode { + u16 svid; + u32 mid; + u8 linked_idx; + u8 active_idx; +#define UCSI_MULTI_DP_INDEX (0xff) + bool checked; +} __packed; + struct ucsi_ccg { struct device *dev; struct ucsi *ucsi; @@ -198,6 +208,11 @@ struct ucsi_ccg { struct work_struct pm_work; struct completion complete; + + u64 last_cmd_sent; + bool has_multiple_dp; + struct ucsi_ccg_altmode orig[UCSI_MAX_ALTMODES]; + struct ucsi_ccg_altmode updated[UCSI_MAX_ALTMODES]; }; static int ccg_read(struct ucsi_ccg *uc, u16 rab, u8 *data, u32 len) @@ -319,12 +334,169 @@ static int ucsi_ccg_init(struct ucsi_ccg *uc) return -ETIMEDOUT; } +static void ucsi_ccg_update_get_current_cam_cmd(struct ucsi_ccg *uc, u8 *data) +{ + u8 cam, new_cam; + + cam = data[0]; + new_cam = uc->orig[cam].linked_idx; + uc->updated[new_cam].active_idx = cam; + data[0] = new_cam; +} + +static bool ucsi_ccg_update_altmodes(struct ucsi *ucsi, + struct ucsi_altmode *orig, + struct ucsi_altmode *updated) +{ + struct ucsi_ccg *uc = ucsi_get_drvdata(ucsi); + struct ucsi_ccg_altmode *alt, *new_alt; + int i, j, k = 0; + bool found = false; + + alt = uc->orig; + new_alt = uc->updated; + memset(uc->updated, 0, sizeof(uc->updated)); + + /* + * Copy original connector altmodes to new structure. + * We need this before second loop since second loop + * checks for duplicate altmodes. + */ + for (i = 0; i < UCSI_MAX_ALTMODES; i++) { + alt[i].svid = orig[i].svid; + alt[i].mid = orig[i].mid; + if (!alt[i].svid) + break; + } + + for (i = 0; i < UCSI_MAX_ALTMODES; i++) { + if (!alt[i].svid) + break; + + /* already checked and considered */ + if (alt[i].checked) + continue; + + if (!DP_CONF_GET_PIN_ASSIGN(alt[i].mid)) { + /* Found Non DP altmode */ + new_alt[k].svid = alt[i].svid; + new_alt[k].mid |= alt[i].mid; + new_alt[k].linked_idx = i; + alt[i].linked_idx = k; + updated[k].svid = new_alt[k].svid; + updated[k].mid = new_alt[k].mid; + k++; + continue; + } + + for (j = i + 1; j < UCSI_MAX_ALTMODES; j++) { + if (alt[i].svid != alt[j].svid || + !DP_CONF_GET_PIN_ASSIGN(alt[j].mid)) { + continue; + } else { + /* Found duplicate DP mode */ + new_alt[k].svid = alt[i].svid; + new_alt[k].mid |= alt[i].mid | alt[j].mid; + new_alt[k].linked_idx = UCSI_MULTI_DP_INDEX; + alt[i].linked_idx = k; + alt[j].linked_idx = k; + alt[j].checked = true; + found = true; + } + } + if (found) { + uc->has_multiple_dp = true; + } else { + /* Didn't find any duplicate DP altmode */ + new_alt[k].svid = alt[i].svid; + new_alt[k].mid |= alt[i].mid; + new_alt[k].linked_idx = i; + alt[i].linked_idx = k; + } + updated[k].svid = new_alt[k].svid; + updated[k].mid = new_alt[k].mid; + k++; + } + return found; +} + +static void ucsi_ccg_update_set_new_cam_cmd(struct ucsi_ccg *uc, + struct ucsi_connector *con, + u64 *cmd) +{ + struct ucsi_ccg_altmode *new_port, *port; + struct typec_altmode *alt = NULL; + u8 new_cam, cam, pin; + bool enter_new_mode; + int i, j, k = 0xff; + + port = uc->orig; + new_cam = UCSI_SET_NEW_CAM_GET_AM(*cmd); + new_port = &uc->updated[new_cam]; + cam = new_port->linked_idx; + enter_new_mode = UCSI_SET_NEW_CAM_ENTER(*cmd); + + /* + * If CAM is UCSI_MULTI_DP_INDEX then this is DP altmode + * with multiple DP mode. Find out CAM for best pin assignment + * among all DP mode. Priorite pin E->D->C after making sure + * the partner supports that pin. + */ + if (cam == UCSI_MULTI_DP_INDEX) { + if (enter_new_mode) { + for (i = 0; con->partner_altmode[i]; i++) { + alt = con->partner_altmode[i]; + if (alt->svid == new_port->svid) + break; + } + /* + * alt will always be non NULL since this is + * UCSI_SET_NEW_CAM command and so there will be + * at least one con->partner_altmode[i] with svid + * matching with new_port->svid. + */ + for (j = 0; port[j].svid; j++) { + pin = DP_CONF_GET_PIN_ASSIGN(port[j].mid); + if (alt && port[j].svid == alt->svid && + (pin & DP_CONF_GET_PIN_ASSIGN(alt->vdo))) { + /* prioritize pin E->D->C */ + if (k == 0xff || (k != 0xff && pin > + DP_CONF_GET_PIN_ASSIGN(port[k].mid)) + ) { + k = j; + } + } + } + cam = k; + new_port->active_idx = cam; + } else { + cam = new_port->active_idx; + } + } + *cmd &= ~UCSI_SET_NEW_CAM_AM_MASK; + *cmd |= UCSI_SET_NEW_CAM_SET_AM(cam); +} + static int ucsi_ccg_read(struct ucsi *ucsi, unsigned int offset, void *val, size_t val_len) { + struct ucsi_ccg *uc = ucsi_get_drvdata(ucsi); + int ret; u16 reg = CCGX_RAB_UCSI_DATA_BLOCK(offset); - return ccg_read(ucsi_get_drvdata(ucsi), reg, val, val_len); + ret = ccg_read(uc, reg, val, val_len); + if (ret) + return ret; + + if (offset == UCSI_MESSAGE_IN) { + if (UCSI_COMMAND(uc->last_cmd_sent) == UCSI_GET_CURRENT_CAM && + uc->has_multiple_dp) { + ucsi_ccg_update_get_current_cam_cmd(uc, (u8 *)val); + } + uc->last_cmd_sent = 0; + } + + return ret; } static int ucsi_ccg_async_write(struct ucsi *ucsi, unsigned int offset, @@ -339,12 +511,26 @@ static int ucsi_ccg_sync_write(struct ucsi *ucsi, unsigned int offset, const void *val, size_t val_len) { struct ucsi_ccg *uc = ucsi_get_drvdata(ucsi); + struct ucsi_connector *con; + int con_index; int ret; mutex_lock(&uc->lock); pm_runtime_get_sync(uc->dev); set_bit(DEV_CMD_PENDING, &uc->flags); + if (offset == UCSI_CONTROL && val_len == sizeof(uc->last_cmd_sent)) { + uc->last_cmd_sent = *(u64 *)val; + + if (UCSI_COMMAND(uc->last_cmd_sent) == UCSI_SET_NEW_CAM && + uc->has_multiple_dp) { + con_index = (uc->last_cmd_sent >> 16) & + UCSI_CMD_CONNECTOR_MASK; + con = &uc->ucsi->connector[con_index - 1]; + ucsi_ccg_update_set_new_cam_cmd(uc, con, (u64 *)val); + } + } + ret = ucsi_ccg_async_write(ucsi, offset, val, val_len); if (ret) goto err_clear_bit; @@ -363,7 +549,8 @@ err_clear_bit: static const struct ucsi_operations ucsi_ccg_ops = { .read = ucsi_ccg_read, .sync_write = ucsi_ccg_sync_write, - .async_write = ucsi_ccg_async_write + .async_write = ucsi_ccg_async_write, + .update_altmodes = ucsi_ccg_update_altmodes }; static irqreturn_t ccg_irq_handler(int irq, void *data) diff --git a/include/dt-bindings/phy/phy.h b/include/dt-bindings/phy/phy.h index b6a1eaf1b339..1f3f866fae7b 100644 --- a/include/dt-bindings/phy/phy.h +++ b/include/dt-bindings/phy/phy.h @@ -16,5 +16,6 @@ #define PHY_TYPE_USB2 3 #define PHY_TYPE_USB3 4 #define PHY_TYPE_UFS 5 +#define PHY_TYPE_DP 6 #endif /* _DT_BINDINGS_PHY */ diff --git a/include/linux/phy/phy-dp.h b/include/linux/phy/phy-dp.h new file mode 100644 index 000000000000..18cad23642cd --- /dev/null +++ b/include/linux/phy/phy-dp.h @@ -0,0 +1,95 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2019 Cadence Design Systems Inc. + */ + +#ifndef __PHY_DP_H_ +#define __PHY_DP_H_ + +#include <linux/types.h> + +/** + * struct phy_configure_opts_dp - DisplayPort PHY configuration set + * + * This structure is used to represent the configuration state of a + * DisplayPort phy. + */ +struct phy_configure_opts_dp { + /** + * @link_rate: + * + * Link Rate, in Mb/s, of the main link. + * + * Allowed values: 1620, 2160, 2430, 2700, 3240, 4320, 5400, 8100 Mb/s + */ + unsigned int link_rate; + + /** + * @lanes: + * + * Number of active, consecutive, data lanes, starting from + * lane 0, used for the transmissions on main link. + * + * Allowed values: 1, 2, 4 + */ + unsigned int lanes; + + /** + * @voltage: + * + * Voltage swing levels, as specified by DisplayPort specification, + * to be used by particular lanes. One value per lane. + * voltage[0] is for lane 0, voltage[1] is for lane 1, etc. + * + * Maximum value: 3 + */ + unsigned int voltage[4]; + + /** + * @pre: + * + * Pre-emphasis levels, as specified by DisplayPort specification, to be + * used by particular lanes. One value per lane. + * + * Maximum value: 3 + */ + unsigned int pre[4]; + + /** + * @ssc: + * + * Flag indicating, whether or not to enable spread-spectrum clocking. + * + */ + u8 ssc : 1; + + /** + * @set_rate: + * + * Flag indicating, whether or not reconfigure link rate and SSC to + * requested values. + * + */ + u8 set_rate : 1; + + /** + * @set_lanes: + * + * Flag indicating, whether or not reconfigure lane count to + * requested value. + * + */ + u8 set_lanes : 1; + + /** + * @set_voltages: + * + * Flag indicating, whether or not reconfigure voltage swing + * and pre-emphasis to requested values. Only lanes specified + * by "lanes" parameter will be affected. + * + */ + u8 set_voltages : 1; +}; + +#endif /* __PHY_DP_H_ */ diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h index 56d3a100006a..bcee8eba62b3 100644 --- a/include/linux/phy/phy.h +++ b/include/linux/phy/phy.h @@ -16,6 +16,7 @@ #include <linux/pm_runtime.h> #include <linux/regulator/consumer.h> +#include <linux/phy/phy-dp.h> #include <linux/phy/phy-mipi-dphy.h> struct phy; @@ -40,6 +41,7 @@ enum phy_mode { PHY_MODE_MIPI_DPHY, PHY_MODE_SATA, PHY_MODE_LVDS, + PHY_MODE_DP }; /** @@ -47,9 +49,12 @@ enum phy_mode { * * @mipi_dphy: Configuration set applicable for phys supporting * the MIPI_DPHY phy mode. + * @dp: Configuration set applicable for phys supporting + * the DisplayPort protocol. */ union phy_configure_opts { struct phy_configure_opts_mipi_dphy mipi_dphy; + struct phy_configure_opts_dp dp; }; /** @@ -234,7 +239,8 @@ struct phy *devm_of_phy_get(struct device *dev, struct device_node *np, const char *con_id); struct phy *devm_of_phy_get_by_index(struct device *dev, struct device_node *np, int index); -void phy_put(struct phy *phy); +void of_phy_put(struct phy *phy); +void phy_put(struct device *dev, struct phy *phy); void devm_phy_put(struct device *dev, struct phy *phy); struct phy *of_phy_get(struct device_node *np, const char *con_id); struct phy *of_phy_simple_xlate(struct device *dev, @@ -419,7 +425,11 @@ static inline struct phy *devm_of_phy_get_by_index(struct device *dev, return ERR_PTR(-ENOSYS); } -static inline void phy_put(struct phy *phy) +static inline void of_phy_put(struct phy *phy) +{ +} + +static inline void phy_put(struct device *dev, struct phy *phy) { } diff --git a/include/linux/platform_data/ehci-sh.h b/include/linux/platform_data/ehci-sh.h deleted file mode 100644 index 219bd79dabfc..000000000000 --- a/include/linux/platform_data/ehci-sh.h +++ /dev/null @@ -1,16 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 - * - * EHCI SuperH driver platform data - * - * Copyright (C) 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> - * Copyright (C) 2012 Renesas Solutions Corp. - */ - -#ifndef __USB_EHCI_SH_H -#define __USB_EHCI_SH_H - -struct ehci_sh_platdata { - void (*phy_init)(void); /* Phy init function */ -}; - -#endif /* __USB_EHCI_SH_H */ diff --git a/include/linux/platform_data/mv_usb.h b/include/linux/platform_data/mv_usb.h index 5376b6d799d5..20d239c02bf3 100644 --- a/include/linux/platform_data/mv_usb.h +++ b/include/linux/platform_data/mv_usb.h @@ -6,14 +6,6 @@ #ifndef __MV_PLATFORM_USB_H #define __MV_PLATFORM_USB_H -enum pxa_ehci_type { - EHCI_UNDEFINED = 0, - PXA_U2OEHCI, /* pxa 168, 9xx */ - PXA_SPH, /* pxa 168, 9xx SPH */ - MMP3_HSIC, /* mmp3 hsic */ - MMP3_FSIC, /* mmp3 fsic */ -}; - enum { MV_USB_MODE_OTG, MV_USB_MODE_HOST, diff --git a/include/linux/platform_data/usb3503.h b/include/linux/platform_data/usb3503.h index e049d51c1353..d01ef97ddf36 100644 --- a/include/linux/platform_data/usb3503.h +++ b/include/linux/platform_data/usb3503.h @@ -17,9 +17,6 @@ enum usb3503_mode { struct usb3503_platform_data { enum usb3503_mode initial_mode; u8 port_off_mask; - int gpio_intn; - int gpio_connect; - int gpio_reset; }; #endif diff --git a/include/linux/usb/gpio_vbus.h b/include/linux/usb/gpio_vbus.h deleted file mode 100644 index 804fb06cf6d6..000000000000 --- a/include/linux/usb/gpio_vbus.h +++ /dev/null @@ -1,33 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * A simple GPIO VBUS sensing driver for B peripheral only devices - * with internal transceivers. - * Optionally D+ pullup can be controlled by a second GPIO. - * - * Copyright (c) 2008 Philipp Zabel <philipp.zabel@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -/** - * struct gpio_vbus_mach_info - configuration for gpio_vbus - * @gpio_vbus: VBUS sensing GPIO - * @gpio_pullup: optional D+ or D- pullup GPIO (else negative/invalid) - * @gpio_vbus_inverted: true if gpio_vbus is active low - * @gpio_pullup_inverted: true if gpio_pullup is active low - * @wakeup: configure gpio_vbus as a wake-up source - * - * The VBUS sensing GPIO should have a pulldown, which will normally be - * part of a resistor ladder turning a 4.0V-5.25V level on VBUS into a - * value the GPIO detects as active. Some systems will use comparators. - */ -struct gpio_vbus_mach_info { - int gpio_vbus; - int gpio_pullup; - bool gpio_vbus_inverted; - bool gpio_pullup_inverted; - bool wakeup; -}; diff --git a/include/linux/usb/irda.h b/include/linux/usb/irda.h index 396d2b043e64..556a801efce3 100644 --- a/include/linux/usb/irda.h +++ b/include/linux/usb/irda.h @@ -119,11 +119,22 @@ struct usb_irda_cs_descriptor { * 6 - 115200 bps * 7 - 576000 bps * 8 - 1.152 Mbps - * 9 - 5 mbps + * 9 - 4 Mbps * 10..15 - Reserved */ #define USB_IRDA_STATUS_LINK_SPEED 0x0f +#define USB_IRDA_LS_NO_CHANGE 0 +#define USB_IRDA_LS_2400 1 +#define USB_IRDA_LS_9600 2 +#define USB_IRDA_LS_19200 3 +#define USB_IRDA_LS_38400 4 +#define USB_IRDA_LS_57600 5 +#define USB_IRDA_LS_115200 6 +#define USB_IRDA_LS_576000 7 +#define USB_IRDA_LS_1152000 8 +#define USB_IRDA_LS_4000000 9 + /* The following is a 4-bit value used only for * outbound header: * diff --git a/include/linux/usb/pd.h b/include/linux/usb/pd.h index 145c38e351c2..a665d7f21142 100644 --- a/include/linux/usb/pd.h +++ b/include/linux/usb/pd.h @@ -45,7 +45,8 @@ enum pd_data_msg_type { PD_DATA_BATT_STATUS = 5, PD_DATA_ALERT = 6, PD_DATA_GET_COUNTRY_INFO = 7, - /* 8-14 Reserved */ + PD_DATA_ENTER_USB = 8, + /* 9-14 Reserved */ PD_DATA_VENDOR_DEF = 15, /* 16-31 Reserved */ }; @@ -418,6 +419,36 @@ static inline unsigned int rdo_max_power(u32 rdo) return ((rdo >> RDO_BATT_MAX_PWR_SHIFT) & RDO_PWR_MASK) * 250; } +/* Enter_USB Data Object */ +#define EUDO_USB_MODE_MASK GENMASK(30, 28) +#define EUDO_USB_MODE_SHIFT 28 +#define EUDO_USB_MODE_USB2 0 +#define EUDO_USB_MODE_USB3 1 +#define EUDO_USB_MODE_USB4 2 +#define EUDO_USB4_DRD BIT(26) +#define EUDO_USB3_DRD BIT(25) +#define EUDO_CABLE_SPEED_MASK GENMASK(23, 21) +#define EUDO_CABLE_SPEED_SHIFT 21 +#define EUDO_CABLE_SPEED_USB2 0 +#define EUDO_CABLE_SPEED_USB3_GEN1 1 +#define EUDO_CABLE_SPEED_USB4_GEN2 2 +#define EUDO_CABLE_SPEED_USB4_GEN3 3 +#define EUDO_CABLE_TYPE_MASK GENMASK(20, 19) +#define EUDO_CABLE_TYPE_SHIFT 19 +#define EUDO_CABLE_TYPE_PASSIVE 0 +#define EUDO_CABLE_TYPE_RE_TIMER 1 +#define EUDO_CABLE_TYPE_RE_DRIVER 2 +#define EUDO_CABLE_TYPE_OPTICAL 3 +#define EUDO_CABLE_CURRENT_MASK GENMASK(18, 17) +#define EUDO_CABLE_CURRENT_SHIFT 17 +#define EUDO_CABLE_CURRENT_NOTSUPP 0 +#define EUDO_CABLE_CURRENT_3A 2 +#define EUDO_CABLE_CURRENT_5A 3 +#define EUDO_PCIE_SUPPORT BIT(16) +#define EUDO_DP_SUPPORT BIT(15) +#define EUDO_TBT_SUPPORT BIT(14) +#define EUDO_HOST_PRESENT BIT(13) + /* USB PD timers and counters */ #define PD_T_NO_RESPONSE 5000 /* 4.5 - 5.5 seconds */ #define PD_T_DB_DETECT 10000 /* 10 - 15 seconds */ diff --git a/include/linux/usb/pd_vdo.h b/include/linux/usb/pd_vdo.h index 781f4e98dd23..35b8e15efaa0 100644 --- a/include/linux/usb/pd_vdo.h +++ b/include/linux/usb/pd_vdo.h @@ -140,6 +140,38 @@ #define PD_PRODUCT_PID(vdo) (((vdo) >> 16) & 0xffff) /* + * UFP VDO1 + * -------- + * <31:29> :: UFP VDO version + * <28> :: Reserved + * <27:24> :: Device capability + * <23:6> :: Reserved + * <5:3> :: Alternate modes + * <2:0> :: USB highest speed + */ +#define PD_VDO1_UFP_DEVCAP(vdo) (((vdo) & GENMASK(27, 24)) >> 24) + +#define DEV_USB2_CAPABLE BIT(0) +#define DEV_USB2_BILLBOARD BIT(1) +#define DEV_USB3_CAPABLE BIT(2) +#define DEV_USB4_CAPABLE BIT(3) + +/* + * DFP VDO + * -------- + * <31:29> :: DFP VDO version + * <28:27> :: Reserved + * <26:24> :: Host capability + * <23:5> :: Reserved + * <4:0> :: Port number + */ +#define PD_VDO_DFP_HOSTCAP(vdo) (((vdo) & GENMASK(26, 24)) >> 24) + +#define HOST_USB2_CAPABLE BIT(0) +#define HOST_USB3_CAPABLE BIT(1) +#define HOST_USB4_CAPABLE BIT(2) + +/* * Cable VDO * --------- * <31:28> :: Cable HW version diff --git a/include/linux/usb/renesas_usbhs.h b/include/linux/usb/renesas_usbhs.h index 6914475bbc86..d418c55523a7 100644 --- a/include/linux/usb/renesas_usbhs.h +++ b/include/linux/usb/renesas_usbhs.h @@ -170,8 +170,6 @@ struct renesas_usbhs_driver_param { */ int pio_dma_border; /* default is 64byte */ - u32 enable_gpio; - /* * option: */ diff --git a/include/linux/usb/tegra_usb_phy.h b/include/linux/usb/tegra_usb_phy.h index 0c5c3ea8b2d7..c29d1b4c9381 100644 --- a/include/linux/usb/tegra_usb_phy.h +++ b/include/linux/usb/tegra_usb_phy.h @@ -17,6 +17,7 @@ #define __TEGRA_USB_PHY_H #include <linux/clk.h> +#include <linux/gpio.h> #include <linux/reset.h> #include <linux/usb/otg.h> @@ -76,8 +77,9 @@ struct tegra_usb_phy { struct usb_phy u_phy; bool is_legacy_phy; bool is_ulpi_phy; - int reset_gpio; + struct gpio_desc *reset_gpio; struct reset_control *pad_rst; + bool powered_on; }; void tegra_usb_phy_preresume(struct usb_phy *phy); diff --git a/include/linux/usb/typec.h b/include/linux/usb/typec.h index 0f52723a11bd..c358b3fd05c9 100644 --- a/include/linux/usb/typec.h +++ b/include/linux/usb/typec.h @@ -9,6 +9,9 @@ #define USB_TYPEC_REV_1_0 0x100 /* 1.0 */ #define USB_TYPEC_REV_1_1 0x110 /* 1.1 */ #define USB_TYPEC_REV_1_2 0x120 /* 1.2 */ +#define USB_TYPEC_REV_1_3 0x130 /* 1.3 */ +#define USB_TYPEC_REV_1_4 0x140 /* 1.4 */ +#define USB_TYPEC_REV_2_0 0x200 /* 2.0 */ struct typec_partner; struct typec_cable; @@ -74,6 +77,7 @@ enum typec_orientation { * @id_header: ID Header VDO * @cert_stat: Cert Stat VDO * @product: Product VDO + * @vdo: Product Type Specific VDOs * * USB power delivery Discover Identity command response data. * @@ -84,6 +88,7 @@ struct usb_pd_identity { u32 id_header; u32 cert_stat; u32 product; + u32 vdo[3]; }; int typec_partner_set_identity(struct typec_partner *partner); @@ -230,6 +235,10 @@ struct typec_cable *typec_register_cable(struct typec_port *port, struct typec_cable_desc *desc); void typec_unregister_cable(struct typec_cable *cable); +struct typec_cable *typec_cable_get(struct typec_port *port); +void typec_cable_put(struct typec_cable *cable); +int typec_cable_is_active(struct typec_cable *cable); + struct typec_plug *typec_register_plug(struct typec_cable *cable, struct typec_plug_desc *desc); void typec_unregister_plug(struct typec_plug *plug); diff --git a/include/linux/usb/typec_altmode.h b/include/linux/usb/typec_altmode.h index 9a88c74a1d0d..923ff3af0628 100644 --- a/include/linux/usb/typec_altmode.h +++ b/include/linux/usb/typec_altmode.h @@ -55,7 +55,7 @@ static inline void *typec_altmode_get_drvdata(struct typec_altmode *altmode) * @activate: User callback for Enter/Exit Mode */ struct typec_altmode_ops { - int (*enter)(struct typec_altmode *altmode); + int (*enter)(struct typec_altmode *altmode, u32 *vdo); int (*exit)(struct typec_altmode *altmode); void (*attention)(struct typec_altmode *altmode, u32 vdo); int (*vdm)(struct typec_altmode *altmode, const u32 hdr, @@ -65,7 +65,7 @@ struct typec_altmode_ops { int (*activate)(struct typec_altmode *altmode, int activate); }; -int typec_altmode_enter(struct typec_altmode *altmode); +int typec_altmode_enter(struct typec_altmode *altmode, u32 *vdo); int typec_altmode_exit(struct typec_altmode *altmode); void typec_altmode_attention(struct typec_altmode *altmode, u32 vdo); int typec_altmode_vdm(struct typec_altmode *altmode, @@ -101,6 +101,22 @@ enum { TYPEC_MODE_DEBUG, /* Debug Accessory */ }; +/* + * USB4 also requires that the pins on the connector are repurposed, just like + * Alternate Modes. USB4 mode is however not entered with the Enter Mode Command + * like the Alternate Modes are, but instead with a special Enter_USB Message. + * The Enter_USB Message can also be used for setting to connector to operate in + * USB 3.2 or in USB 2.0 mode instead of USB4. + * + * The Enter_USB specific "USB Modes" are also supplied here as special modal + * state values, just like the Accessory Modes. + */ +enum { + TYPEC_MODE_USB2 = TYPEC_MODE_DEBUG, /* USB 2.0 mode */ + TYPEC_MODE_USB3, /* USB 3.2 mode */ + TYPEC_MODE_USB4 /* USB4 mode */ +}; + #define TYPEC_MODAL_STATE(_state_) ((_state_) + TYPEC_STATE_MODAL) struct typec_altmode *typec_altmode_get_plug(struct typec_altmode *altmode, diff --git a/include/linux/usb/typec_mux.h b/include/linux/usb/typec_mux.h index 873ace5b0cf8..be7292c0be5e 100644 --- a/include/linux/usb/typec_mux.h +++ b/include/linux/usb/typec_mux.h @@ -8,6 +8,7 @@ struct device; struct typec_mux; struct typec_switch; +struct typec_altmode; struct fwnode_handle; typedef int (*typec_switch_set_fn_t)(struct typec_switch *sw, @@ -29,7 +30,14 @@ void typec_switch_unregister(struct typec_switch *sw); void typec_switch_set_drvdata(struct typec_switch *sw, void *data); void *typec_switch_get_drvdata(struct typec_switch *sw); -typedef int (*typec_mux_set_fn_t)(struct typec_mux *mux, int state); +struct typec_mux_state { + struct typec_altmode *alt; + unsigned long mode; + void *data; +}; + +typedef int (*typec_mux_set_fn_t)(struct typec_mux *mux, + struct typec_mux_state *state); struct typec_mux_desc { struct fwnode_handle *fwnode; diff --git a/include/linux/usb/ulpi.h b/include/linux/usb/ulpi.h index c515765adab7..36c2982780ad 100644 --- a/include/linux/usb/ulpi.h +++ b/include/linux/usb/ulpi.h @@ -55,12 +55,23 @@ #if IS_ENABLED(CONFIG_USB_ULPI) struct usb_phy *otg_ulpi_create(struct usb_phy_io_ops *ops, unsigned int flags); + +struct usb_phy *devm_otg_ulpi_create(struct device *dev, + struct usb_phy_io_ops *ops, + unsigned int flags); #else static inline struct usb_phy *otg_ulpi_create(struct usb_phy_io_ops *ops, unsigned int flags) { return NULL; } + +static inline struct usb_phy *devm_otg_ulpi_create(struct device *dev, + struct usb_phy_io_ops *ops, + unsigned int flags) +{ + return NULL; +} #endif #ifdef CONFIG_USB_ULPI_VIEWPORT diff --git a/include/linux/usb/usb_phy_generic.h b/include/linux/usb/usb_phy_generic.h index 7408cf52c710..cd9e70a552a0 100644 --- a/include/linux/usb/usb_phy_generic.h +++ b/include/linux/usb/usb_phy_generic.h @@ -3,18 +3,6 @@ #define __LINUX_USB_NOP_XCEIV_H #include <linux/usb/otg.h> -#include <linux/gpio/consumer.h> - -struct usb_phy_generic_platform_data { - enum usb_phy_type type; - unsigned long clk_rate; - - /* if set fails with -EPROBE_DEFER if can't get regulator */ - unsigned int needs_vcc:1; - unsigned int needs_reset:1; /* deprecated */ - int gpio_reset; - struct gpio_desc *gpiod_vbus; -}; #if IS_ENABLED(CONFIG_NOP_USB_XCEIV) /* sometimes transceivers are accessed only through e.g. ULPI */ diff --git a/tools/usb/usbip/README b/tools/usb/usbip/README index 7844490fc603..2fc021c0eae1 100644 --- a/tools/usb/usbip/README +++ b/tools/usb/usbip/README @@ -138,28 +138,28 @@ attached to this host. Local USB devices ================= - busid 1-1 (05a9:a511) - 1-1:1.0 -> ov511 + 1-1:1.0 - busid 3-2 (0711:0902) - 3-2:1.0 -> none + 3-2:1.0 - busid 3-3.1 (08bb:2702) - 3-3.1:1.0 -> snd-usb-audio - 3-3.1:1.1 -> snd-usb-audio + 3-3.1:1.0 + 3-3.1:1.1 - busid 3-3.2 (04bb:0206) - 3-3.2:1.0 -> usb-storage + 3-3.2:1.0 - busid 3-3 (0409:0058) - 3-3:1.0 -> hub + 3-3:1.0 - busid 4-1 (046d:08b2) - 4-1:1.0 -> none - 4-1:1.1 -> none - 4-1:1.2 -> none + 4-1:1.0 + 4-1:1.1 + 4-1:1.2 - busid 5-2 (058f:9254) - 5-2:1.0 -> hub + 5-2:1.0 A USB storage device of busid 3-3.2 is now bound to the usb-storage driver. To export this device, we first mark the device as @@ -180,7 +180,7 @@ Mark the device of busid 3-3.2 as exportable: ... - busid 3-3.2 (04bb:0206) - 3-3.2:1.0 -> usbip-host + 3-3.2:1.0 ... --------------------------- diff --git a/tools/usb/usbip/src/usbip_network.c b/tools/usb/usbip/src/usbip_network.c index d595d72693fb..ed4dc8c14269 100644 --- a/tools/usb/usbip/src/usbip_network.c +++ b/tools/usb/usbip/src/usbip_network.c @@ -50,39 +50,39 @@ void usbip_setup_port_number(char *arg) info("using port %d (\"%s\")", usbip_port, usbip_port_string); } -void usbip_net_pack_uint32_t(int pack, uint32_t *num) +uint32_t usbip_net_pack_uint32_t(int pack, uint32_t num) { uint32_t i; if (pack) - i = htonl(*num); + i = htonl(num); else - i = ntohl(*num); + i = ntohl(num); - *num = i; + return i; } -void usbip_net_pack_uint16_t(int pack, uint16_t *num) +uint16_t usbip_net_pack_uint16_t(int pack, uint16_t num) { uint16_t i; if (pack) - i = htons(*num); + i = htons(num); else - i = ntohs(*num); + i = ntohs(num); - *num = i; + return i; } void usbip_net_pack_usb_device(int pack, struct usbip_usb_device *udev) { - usbip_net_pack_uint32_t(pack, &udev->busnum); - usbip_net_pack_uint32_t(pack, &udev->devnum); - usbip_net_pack_uint32_t(pack, &udev->speed); + udev->busnum = usbip_net_pack_uint32_t(pack, udev->busnum); + udev->devnum = usbip_net_pack_uint32_t(pack, udev->devnum); + udev->speed = usbip_net_pack_uint32_t(pack, udev->speed); - usbip_net_pack_uint16_t(pack, &udev->idVendor); - usbip_net_pack_uint16_t(pack, &udev->idProduct); - usbip_net_pack_uint16_t(pack, &udev->bcdDevice); + udev->idVendor = usbip_net_pack_uint16_t(pack, udev->idVendor); + udev->idProduct = usbip_net_pack_uint16_t(pack, udev->idProduct); + udev->bcdDevice = usbip_net_pack_uint16_t(pack, udev->bcdDevice); } void usbip_net_pack_usb_interface(int pack __attribute__((unused)), @@ -129,6 +129,14 @@ ssize_t usbip_net_send(int sockfd, void *buff, size_t bufflen) return usbip_net_xmit(sockfd, buff, bufflen, 1); } +static inline void usbip_net_pack_op_common(int pack, + struct op_common *op_common) +{ + op_common->version = usbip_net_pack_uint16_t(pack, op_common->version); + op_common->code = usbip_net_pack_uint16_t(pack, op_common->code); + op_common->status = usbip_net_pack_uint32_t(pack, op_common->status); +} + int usbip_net_send_op_common(int sockfd, uint32_t code, uint32_t status) { struct op_common op_common; @@ -140,7 +148,7 @@ int usbip_net_send_op_common(int sockfd, uint32_t code, uint32_t status) op_common.code = code; op_common.status = status; - PACK_OP_COMMON(1, &op_common); + usbip_net_pack_op_common(1, &op_common); rc = usbip_net_send(sockfd, &op_common, sizeof(op_common)); if (rc < 0) { @@ -164,7 +172,7 @@ int usbip_net_recv_op_common(int sockfd, uint16_t *code, int *status) goto err; } - PACK_OP_COMMON(0, &op_common); + usbip_net_pack_op_common(0, &op_common); if (op_common.version != USBIP_VERSION) { err("USBIP Kernel and tool version mismatch: %d %d:", diff --git a/tools/usb/usbip/src/usbip_network.h b/tools/usb/usbip/src/usbip_network.h index 555215eae43e..83b4c5344f72 100644 --- a/tools/usb/usbip/src/usbip_network.h +++ b/tools/usb/usbip/src/usbip_network.h @@ -32,12 +32,6 @@ struct op_common { } __attribute__((packed)); -#define PACK_OP_COMMON(pack, op_common) do {\ - usbip_net_pack_uint16_t(pack, &(op_common)->version);\ - usbip_net_pack_uint16_t(pack, &(op_common)->code);\ - usbip_net_pack_uint32_t(pack, &(op_common)->status);\ -} while (0) - /* ---------------------------------------------------------------------- */ /* Dummy Code */ #define OP_UNSPEC 0x00 @@ -163,11 +157,11 @@ struct op_devlist_reply_extra { } while (0) #define PACK_OP_DEVLIST_REPLY(pack, reply) do {\ - usbip_net_pack_uint32_t(pack, &(reply)->ndev);\ + (reply)->ndev = usbip_net_pack_uint32_t(pack, (reply)->ndev);\ } while (0) -void usbip_net_pack_uint32_t(int pack, uint32_t *num); -void usbip_net_pack_uint16_t(int pack, uint16_t *num); +uint32_t usbip_net_pack_uint32_t(int pack, uint32_t num); +uint16_t usbip_net_pack_uint16_t(int pack, uint16_t num); void usbip_net_pack_usb_device(int pack, struct usbip_usb_device *udev); void usbip_net_pack_usb_interface(int pack, struct usbip_usb_interface *uinf); |