summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorJakub Kicinski <kuba@kernel.org>2023-04-06 18:25:36 -0700
committerJakub Kicinski <kuba@kernel.org>2023-04-10 17:56:18 -0700
commit301f227fc860624d37ba5dae9da57dcf371268db (patch)
treed63448425584a016acf0c88d6adea460ac85b6a6
parent08a096780d9239e69909c48f4b1fcd99c860b2ef (diff)
downloadlwn-301f227fc860624d37ba5dae9da57dcf371268db.tar.gz
lwn-301f227fc860624d37ba5dae9da57dcf371268db.zip
net: piggy back on the memory barrier in bql when waking queues
Drivers call netdev_tx_completed_queue() right before netif_txq_maybe_wake(). If BQL is enabled netdev_tx_completed_queue() should issue a memory barrier, so we can depend on that separating the stop check from the consumer index update, instead of adding another barrier in netif_txq_maybe_wake(). This matters more than the barriers on the xmit path, because the wake condition is almost always true. So we issue the consumer side barrier often. Wrap netdev_tx_completed_queue() in a local helper to issue the barrier even if BQL is disabled. Keep the same semantics as netdev_tx_completed_queue() (barrier only if bytes != 0) to make it clear that the barrier is conditional. Plus since macro gets pkt/byte counts as arguments now - we can skip waking if there were no packets completed. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-rw-r--r--drivers/net/ethernet/broadcom/bnxt/bnxt.c6
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_main.c12
-rw-r--r--include/linux/netdevice.h2
-rw-r--r--include/net/netdev_queues.h39
4 files changed, 38 insertions, 21 deletions
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index de97bee25249..f7602d8d79e3 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -688,11 +688,11 @@ next_tx_int:
dev_kfree_skb_any(skb);
}
- netdev_tx_completed_queue(txq, nr_pkts, tx_bytes);
txr->tx_cons = cons;
- __netif_txq_maybe_wake(txq, bnxt_tx_avail(bp, txr), bp->tx_wake_thresh,
- READ_ONCE(txr->dev_state) != BNXT_DEV_STATE_CLOSING);
+ __netif_txq_completed_wake(txq, nr_pkts, tx_bytes,
+ bnxt_tx_avail(bp, txr), bp->tx_wake_thresh,
+ READ_ONCE(txr->dev_state) != BNXT_DEV_STATE_CLOSING);
}
static struct page *__bnxt_alloc_rx_page(struct bnxt *bp, dma_addr_t *mapping,
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index cbbddee55db1..f2604fc05991 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -1251,15 +1251,13 @@ static bool ixgbe_clean_tx_irq(struct ixgbe_q_vector *q_vector,
if (ring_is_xdp(tx_ring))
return !!budget;
- netdev_tx_completed_queue(txring_txq(tx_ring),
- total_packets, total_bytes);
-
#define TX_WAKE_THRESHOLD (DESC_NEEDED * 2)
txq = netdev_get_tx_queue(tx_ring->netdev, tx_ring->queue_index);
- if (total_packets && netif_carrier_ok(tx_ring->netdev) &&
- !__netif_txq_maybe_wake(txq, ixgbe_desc_unused(tx_ring),
- TX_WAKE_THRESHOLD,
- test_bit(__IXGBE_DOWN, &adapter->state)))
+ if (!__netif_txq_completed_wake(txq, total_packets, total_bytes,
+ ixgbe_desc_unused(tx_ring),
+ TX_WAKE_THRESHOLD,
+ netif_carrier_ok(tx_ring->netdev) &&
+ test_bit(__IXGBE_DOWN, &adapter->state)))
++tx_ring->tx_stats.restart_queue;
return !!budget;
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 7bec9a2be8ef..fe355592dfde 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -3532,7 +3532,7 @@ static inline void netdev_tx_completed_queue(struct netdev_queue *dev_queue,
* netdev_tx_sent_queue will miss the update and cause the queue to
* be stopped forever
*/
- smp_mb();
+ smp_mb(); /* NOTE: netdev_txq_completed_mb() assumes this exists */
if (unlikely(dql_avail(&dev_queue->dql) < 0))
return;
diff --git a/include/net/netdev_queues.h b/include/net/netdev_queues.h
index 5236d78bbdeb..b26fdb441e39 100644
--- a/include/net/netdev_queues.h
+++ b/include/net/netdev_queues.h
@@ -38,7 +38,7 @@
netif_tx_stop_queue(txq); \
/* Producer index and stop bit must be visible \
* to consumer before we recheck. \
- * Pairs with a barrier in __netif_txq_maybe_wake(). \
+ * Pairs with a barrier in __netif_txq_completed_wake(). \
*/ \
smp_mb__after_atomic(); \
\
@@ -82,10 +82,24 @@
_res; \
}) \
+/* Variant of netdev_tx_completed_queue() which guarantees smp_mb() if
+ * @bytes != 0, regardless of kernel config.
+ */
+static inline void
+netdev_txq_completed_mb(struct netdev_queue *dev_queue,
+ unsigned int pkts, unsigned int bytes)
+{
+ if (IS_ENABLED(CONFIG_BQL))
+ netdev_tx_completed_queue(dev_queue, pkts, bytes);
+ else if (bytes)
+ smp_mb();
+}
/**
- * __netif_txq_maybe_wake() - locklessly wake a Tx queue, if needed
+ * __netif_txq_completed_wake() - locklessly wake a Tx queue, if needed
* @txq: struct netdev_queue to stop/start
+ * @pkts: number of packets completed
+ * @bytes: number of bytes completed
* @get_desc: get current number of free descriptors (see requirements below!)
* @start_thrs: minimal number of descriptors to re-enable the queue
* @down_cond: down condition, predicate indicating that the queue should
@@ -94,22 +108,27 @@
* All arguments may be evaluated multiple times.
* @get_desc must be a formula or a function call, it must always
* return up-to-date information when evaluated!
+ * Reports completed pkts/bytes to BQL.
*
* Returns:
* 0 if the queue was woken up
* 1 if the queue was already enabled (or disabled but @down_cond is true)
* -1 if the queue was left unchanged (@start_thrs not reached)
*/
-#define __netif_txq_maybe_wake(txq, get_desc, start_thrs, down_cond) \
+#define __netif_txq_completed_wake(txq, pkts, bytes, \
+ get_desc, start_thrs, down_cond) \
({ \
int _res; \
\
+ /* Report to BQL and piggy back on its barrier. \
+ * Barrier makes sure that anybody stopping the queue \
+ * after this point sees the new consumer index. \
+ * Pairs with barrier in netif_txq_try_stop(). \
+ */ \
+ netdev_txq_completed_mb(txq, pkts, bytes); \
+ \
_res = -1; \
- if (likely(get_desc > start_thrs)) { \
- /* Make sure that anybody stopping the queue after \
- * this sees the new next_to_clean. \
- */ \
- smp_mb(); \
+ if (pkts && likely(get_desc > start_thrs)) { \
_res = 1; \
if (unlikely(netif_tx_queue_stopped(txq)) && \
!(down_cond)) { \
@@ -120,8 +139,8 @@
_res; \
})
-#define netif_txq_maybe_wake(txq, get_desc, start_thrs) \
- __netif_txq_maybe_wake(txq, get_desc, start_thrs, false)
+#define netif_txq_completed_wake(txq, pkts, bytes, get_desc, start_thrs) \
+ __netif_txq_completed_wake(txq, pkts, bytes, get_desc, start_thrs, false)
/* subqueue variants follow */