Merge tag 'pm-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These update PCI and ACPI power management (improved handling of ACPI
  power resources and PCIe link delays, fixes related to corner cases,
  hibernation handling rework), fix and extend the operating performance
  points (OPP) framework, add new cpufreq drivers for Raspberry Pi and
  imx8m chips, update some other cpufreq drivers, clean up assorted
  pieces of PM code and documentation and update tools.

  Specifics:

   - Improve the handling of shared ACPI power resources in the PCI bus
     type layer (Mika Westerberg).

   - Make the PCI layer take link delays required by the PCIe spec into
     account as appropriate and avoid polling devices in D3cold for PME
     (Mika Westerberg).

   - Fix some corner case issues in ACPI device power management and in
     the PCI bus type layer, optimiza and clean up the handling of
     runtime-suspended PCI devices during system-wide transitions to
     sleep states (Rafael Wysocki).

   - Rework hibernation handling in the ACPI core and the PCI bus type
     to resume runtime-suspended devices before hibernation (which
     allows some functional problems to be avoided) and fix some ACPI
     power management issues related to hiberation (Rafael Wysocki).

   - Extend the operating performance points (OPP) framework to support
     a wider range of devices (Rajendra Nayak, Stehpen Boyd).

   - Fix issues related to genpd_virt_devs and issues with platforms
     using the set_opp() callback in the OPP framework (Viresh Kumar,
     Dmitry Osipenko).

   - Add new cpufreq driver for Raspberry Pi (Nicolas Saenz Julienne).

   - Add new cpufreq driver for imx8m and imx7d chips (Leonard Crestez).

   - Fix and clean up the pcc-cpufreq, brcmstb-avs-cpufreq, s5pv210, and
     armada-37xx cpufreq drivers (David Arcari, Florian Fainelli, Paweł
     Chmiel, YueHaibing).

   - Clean up and fix the cpufreq core (Viresh Kumar, Daniel Lezcano).

   - Fix minor issue in the ACPI system sleep support code and export
     one function from it (Lenny Szubowicz, Dexuan Cui).

   - Clean up assorted pieces of PM code and documentation (Kefeng Wang,
     Andy Shevchenko, Bart Van Assche, Greg Kroah-Hartman, Fuqian Huang,
     Geert Uytterhoeven, Mathieu Malaterre, Rafael Wysocki).

   - Update the pm-graph utility to v5.4 (Todd Brandt).

   - Fix and clean up the cpupower utility (Abhishek Goel, Nick Black)"

* tag 'pm-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (57 commits)
  ACPI: PM: Make acpi_sleep_state_supported() non-static
  PM: sleep: Drop dev_pm_skip_next_resume_phases()
  ACPI: PM: Unexport acpi_device_get_power()
  Documentation: ABI: power: Add missing newline at end of file
  ACPI: PM: Drop unused function and function header
  ACPI: PM: Introduce "poweroff" callbacks for ACPI PM domain and LPSS
  ACPI: PM: Simplify and fix PM domain hibernation callbacks
  PCI: PM: Simplify bus-level hibernation callbacks
  PM: ACPI/PCI: Resume all devices during hibernation
  cpufreq: Avoid calling cpufreq_verify_current_freq() from handle_update()
  cpufreq: Consolidate cpufreq_update_current_freq() and __cpufreq_get()
  kernel: power: swap: use kzalloc() instead of kmalloc() followed by memset()
  cpufreq: Don't skip frequency validation for has_target() drivers
  PCI: PM/ACPI: Refresh all stale power state data in pci_pm_complete()
  PCI / ACPI: Add _PR0 dependent devices
  ACPI / PM: Introduce concept of a _PR0 dependent device
  PCI / ACPI: Use cached ACPI device state to get PCI device power state
  ACPI: PM: Allow transitions to D0 to occur in special cases
  ACPI: PM: Avoid evaluating _PS3 on transitions from D3hot to D3cold
  cpufreq: Use has_target() instead of !setpolicy
  ...

55 files changed, 2325 insertions, 631 deletions

diff --git a/Documentation/ABI/testing/sysfs-power b/Documentation/ABI/testing/sysfs-power
index 18b7dc929234..3c5130355011 100644
--- a/Documentation/ABI/testing/sysfs-power
+++ b/Documentation/ABI/testing/sysfs-power
@@ -300,4 +300,4 @@ Description:
 		attempt.
 
 		Using this sysfs file will override any values that were
-		set using the kernel command line for disk offset.
\ No newline at end of file
+		set using the kernel command line for disk offset.
diff --git a/Documentation/devicetree/bindings/cpufreq/imx-cpufreq-dt.txt b/Documentation/devicetree/bindings/cpufreq/imx-cpufreq-dt.txt
new file mode 100644
index 000000000000..87bff5add3f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/imx-cpufreq-dt.txt
@@ -0,0 +1,37 @@
+i.MX CPUFreq-DT OPP bindings
+================================
+
+Certain i.MX SoCs support different OPPs depending on the "market segment" and
+"speed grading" value which are written in fuses. These bits are combined with
+the opp-supported-hw values for each OPP to check if the OPP is allowed.
+
+Required properties:
+--------------------
+
+For each opp entry in 'operating-points-v2' table:
+- opp-supported-hw: Two bitmaps indicating:
+  - Supported speed grade mask
+  - Supported market segment mask
+    0: Consumer
+    1: Extended Consumer
+    2: Industrial
+    3: Automotive
+
+Example:
+--------
+
+opp_table {
+	compatible = "operating-points-v2";
+	opp-1000000000 {
+		opp-hz = /bits/ 64 <1000000000>;
+		/* grade >= 0, consumer only */
+		opp-supported-hw = <0xf>, <0x3>;
+	};
+
+	opp-1300000000 {
+		opp-hz = /bits/ 64 <1300000000>;
+		opp-microvolt = <1000000>;
+		/* grade >= 1, all segments */
+		opp-supported-hw = <0xe>, <0x7>;
+	};
+}
diff --git a/arch/powerpc/kernel/suspend.c b/arch/powerpc/kernel/suspend.c
index c612d50c9d18..b84992c10854 100644
--- a/arch/powerpc/kernel/suspend.c
+++ b/arch/powerpc/kernel/suspend.c
@@ -7,6 +7,7 @@
  */
 
 #include <linux/mm.h>
+#include <linux/suspend.h>
 #include <asm/page.h>
 #include <asm/sections.h>
 
diff --git a/arch/s390/kernel/entry.h b/arch/s390/kernel/entry.h
index 20420c2b8a14..b2956d49b6ad 100644
--- a/arch/s390/kernel/entry.h
+++ b/arch/s390/kernel/entry.h
@@ -63,7 +63,6 @@ void __init startup_init(void);
 void die(struct pt_regs *regs, const char *str);
 int setup_profiling_timer(unsigned int multiplier);
 void __init time_init(void);
-int pfn_is_nosave(unsigned long);
 void s390_early_resume(void);
 unsigned long prepare_ftrace_return(unsigned long parent, unsigned long sp, unsigned long ip);
 
diff --git a/drivers/acpi/acpi_lpit.c b/drivers/acpi/acpi_lpit.c
index 6116b0fb86d4..433376e819bb 100644
--- a/drivers/acpi/acpi_lpit.c
+++ b/drivers/acpi/acpi_lpit.c
@@ -129,7 +129,7 @@ static void lpit_update_residency(struct lpit_residency_info *info,
 
 static void lpit_process(u64 begin, u64 end)
 {
-	while (begin + sizeof(struct acpi_lpit_native) < end) {
+	while (begin + sizeof(struct acpi_lpit_native) <= end) {
 		struct acpi_lpit_native *lpit_native = (struct acpi_lpit_native *)begin;
 
 		if (!lpit_native->header.type && !lpit_native->header.flags) {
@@ -148,7 +148,6 @@ static void lpit_process(u64 begin, u64 end)
 void acpi_init_lpit(void)
 {
 	acpi_status status;
-	u64 lpit_begin;
 	struct acpi_table_lpit *lpit;
 
 	status = acpi_get_table(ACPI_SIG_LPIT, 0, (struct acpi_table_header **)&lpit);
@@ -156,6 +155,6 @@ void acpi_init_lpit(void)
 	if (ACPI_FAILURE(status))
 		return;
 
-	lpit_begin = (u64)lpit + sizeof(*lpit);
-	lpit_process(lpit_begin, lpit_begin + lpit->header.length);
+	lpit_process((u64)lpit + sizeof(*lpit),
+		     (u64)lpit + lpit->header.length);
 }
diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c
index 23484aa877b6..398451839178 100644
--- a/drivers/acpi/acpi_lpss.c
+++ b/drivers/acpi/acpi_lpss.c
@@ -1061,6 +1061,13 @@ static int acpi_lpss_suspend_noirq(struct device *dev)
 	int ret;
 
 	if (pdata->dev_desc->resume_from_noirq) {
+		/*
+		 * The driver's ->suspend_late callback will be invoked by
+		 * acpi_lpss_do_suspend_late(), with the assumption that the
+		 * driver really wanted to run that code in ->suspend_noirq, but
+		 * it could not run after acpi_dev_suspend() and the driver
+		 * expected the latter to be called in the "late" phase.
+		 */
 		ret = acpi_lpss_do_suspend_late(dev);
 		if (ret)
 			return ret;
@@ -1091,16 +1098,99 @@ static int acpi_lpss_resume_noirq(struct device *dev)
 	struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
 	int ret;
 
-	ret = acpi_subsys_resume_noirq(dev);
+	/* Follow acpi_subsys_resume_noirq(). */
+	if (dev_pm_may_skip_resume(dev))
+		return 0;
+
+	if (dev_pm_smart_suspend_and_suspended(dev))
+		pm_runtime_set_active(dev);
+
+	ret = pm_generic_resume_noirq(dev);
 	if (ret)
 		return ret;
 
-	if (!dev_pm_may_skip_resume(dev) && pdata->dev_desc->resume_from_noirq)
-		ret = acpi_lpss_do_resume_early(dev);
+	if (!pdata->dev_desc->resume_from_noirq)
+		return 0;
 
-	return ret;
+	/*
+	 * The driver's ->resume_early callback will be invoked by
+	 * acpi_lpss_do_resume_early(), with the assumption that the driver
+	 * really wanted to run that code in ->resume_noirq, but it could not
+	 * run before acpi_dev_resume() and the driver expected the latter to be
+	 * called in the "early" phase.
+	 */
+	return acpi_lpss_do_resume_early(dev);
+}
+
+static int acpi_lpss_do_restore_early(struct device *dev)
+{
+	int ret = acpi_lpss_resume(dev);
+
+	return ret ? ret : pm_generic_restore_early(dev);
 }
 
+static int acpi_lpss_restore_early(struct device *dev)
+{
+	struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
+
+	if (pdata->dev_desc->resume_from_noirq)
+		return 0;
+
+	return acpi_lpss_do_restore_early(dev);
+}
+
+static int acpi_lpss_restore_noirq(struct device *dev)
+{
+	struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
+	int ret;
+
+	ret = pm_generic_restore_noirq(dev);
+	if (ret)
+		return ret;
+
+	if (!pdata->dev_desc->resume_from_noirq)
+		return 0;
+
+	/* This is analogous to what happens in acpi_lpss_resume_noirq(). */
+	return acpi_lpss_do_restore_early(dev);
+}
+
+static int acpi_lpss_do_poweroff_late(struct device *dev)
+{
+	int ret = pm_generic_poweroff_late(dev);
+
+	return ret ? ret : acpi_lpss_suspend(dev, device_may_wakeup(dev));
+}
+
+static int acpi_lpss_poweroff_late(struct device *dev)
+{
+	struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
+
+	if (dev_pm_smart_suspend_and_suspended(dev))
+		return 0;
+
+	if (pdata->dev_desc->resume_from_noirq)
+		return 0;
+
+	return acpi_lpss_do_poweroff_late(dev);
+}
+
+static int acpi_lpss_poweroff_noirq(struct device *dev)
+{
+	struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
+
+	if (dev_pm_smart_suspend_and_suspended(dev))
+		return 0;
+
+	if (pdata->dev_desc->resume_from_noirq) {
+		/* This is analogous to the acpi_lpss_suspend_noirq() case. */
+		int ret = acpi_lpss_do_poweroff_late(dev);
+		if (ret)
+			return ret;
+	}
+
+	return pm_generic_poweroff_noirq(dev);
+}
 #endif /* CONFIG_PM_SLEEP */
 
 static int acpi_lpss_runtime_suspend(struct device *dev)
@@ -1134,14 +1224,11 @@ static struct dev_pm_domain acpi_lpss_pm_domain = {
 		.resume_noirq = acpi_lpss_resume_noirq,
 		.resume_early = acpi_lpss_resume_early,
 		.freeze = acpi_subsys_freeze,
-		.freeze_late = acpi_subsys_freeze_late,
-		.freeze_noirq = acpi_subsys_freeze_noirq,
-		.thaw_noirq = acpi_subsys_thaw_noirq,
-		.poweroff = acpi_subsys_suspend,
-		.poweroff_late = acpi_lpss_suspend_late,
-		.poweroff_noirq = acpi_lpss_suspend_noirq,
-		.restore_noirq = acpi_lpss_resume_noirq,
-		.restore_early = acpi_lpss_resume_early,
+		.poweroff = acpi_subsys_poweroff,
+		.poweroff_late = acpi_lpss_poweroff_late,
+		.poweroff_noirq = acpi_lpss_poweroff_noirq,
+		.restore_noirq = acpi_lpss_restore_noirq,
+		.restore_early = acpi_lpss_restore_early,
 #endif
 		.runtime_suspend = acpi_lpss_runtime_suspend,
 		.runtime_resume = acpi_lpss_runtime_resume,
diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c
index e54956ae93d3..28cffaaf9d82 100644
--- a/drivers/acpi/device_pm.c
+++ b/drivers/acpi/device_pm.c
@@ -45,6 +45,19 @@ const char *acpi_power_state_string(int state)
 	}
 }
 
+static int acpi_dev_pm_explicit_get(struct acpi_device *device, int *state)
+{
+	unsigned long long psc;
+	acpi_status status;
+
+	status = acpi_evaluate_integer(device->handle, "_PSC", NULL, &psc);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
+	*state = psc;
+	return 0;
+}
+
 /**
  * acpi_device_get_power - Get power state of an ACPI device.
  * @device: Device to get the power state of.
@@ -53,10 +66,16 @@ const char *acpi_power_state_string(int state)
  * This function does not update the device's power.state field, but it may
  * update its parent's power.state field (when the parent's power state is
  * unknown and the device's power state turns out to be D0).
+ *
+ * Also, it does not update power resource reference counters to ensure that
+ * the power state returned by it will be persistent and it may return a power
+ * state shallower than previously set by acpi_device_set_power() for @device
+ * (if that power state depends on any power resources).
  */
 int acpi_device_get_power(struct acpi_device *device, int *state)
 {
 	int result = ACPI_STATE_UNKNOWN;
+	int error;
 
 	if (!device || !state)
 		return -EINVAL;
@@ -73,18 +92,16 @@ int acpi_device_get_power(struct acpi_device *device, int *state)
 	 * if available.
 	 */
 	if (device->power.flags.power_resources) {
-		int error = acpi_power_get_inferred_state(device, &result);
+		error = acpi_power_get_inferred_state(device, &result);
 		if (error)
 			return error;
 	}
 	if (device->power.flags.explicit_get) {
-		acpi_handle handle = device->handle;
-		unsigned long long psc;
-		acpi_status status;
+		int psc;
 
-		status = acpi_evaluate_integer(handle, "_PSC", NULL, &psc);
-		if (ACPI_FAILURE(status))
-			return -ENODEV;
+		error = acpi_dev_pm_explicit_get(device, &psc);
+		if (error)
+			return error;
 
 		/*
 		 * The power resources settings may indicate a power state
@@ -118,7 +135,6 @@ int acpi_device_get_power(struct acpi_device *device, int *state)
 
 	return 0;
 }
-EXPORT_SYMBOL(acpi_device_get_power);
 
 static int acpi_dev_pm_explicit_set(struct acpi_device *adev, int state)
 {
@@ -152,7 +168,8 @@ int acpi_device_set_power(struct acpi_device *device, int state)
 
 	/* Make sure this is a valid target state */
 
-	if (state == device->power.state) {
+	/* There is a special case for D0 addressed below. */
+	if (state > ACPI_STATE_D0 && state == device->power.state) {
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device [%s] already in %s\n",
 				  device->pnp.bus_id,
 				  acpi_power_state_string(state)));
@@ -202,9 +219,15 @@ int acpi_device_set_power(struct acpi_device *device, int state)
 			return -ENODEV;
 		}
 
-		result = acpi_dev_pm_explicit_set(device, state);
-		if (result)
-			goto end;
+		/*
+		 * If the device goes from D3hot to D3cold, _PS3 has been
+		 * evaluated for it already, so skip it in that case.
+		 */
+		if (device->power.state < ACPI_STATE_D3_HOT) {
+			result = acpi_dev_pm_explicit_set(device, state);
+			if (result)
+				goto end;
+		}
 
 		if (device->power.flags.power_resources)
 			result = acpi_power_transition(device, target_state);
@@ -214,6 +237,30 @@ int acpi_device_set_power(struct acpi_device *device, int state)
 			if (result)
 				goto end;
 		}
+
+		if (device->power.state == ACPI_STATE_D0) {
+			int psc;
+
+			/* Nothing to do here if _PSC is not present. */
+			if (!device->power.flags.explicit_get)
+				return 0;
+
+			/*
+			 * The power state of the device was set to D0 last
+			 * time, but that might have happened before a
+			 * system-wide transition involving the platform
+			 * firmware, so it may be necessary to evaluate _PS0
+			 * for the device here.  However, use extra care here
+			 * and evaluate _PSC to check the device's current power
+			 * state, and only invoke _PS0 if the evaluation of _PSC
+			 * is successful and it returns a power state different
+			 * from D0.
+			 */
+			result = acpi_dev_pm_explicit_get(device, &psc);
+			if (result || psc == ACPI_STATE_D0)
+				return 0;
+		}
+
 		result = acpi_dev_pm_explicit_set(device, ACPI_STATE_D0);
 	}
 
@@ -1073,7 +1120,7 @@ EXPORT_SYMBOL_GPL(acpi_subsys_suspend_noirq);
  * acpi_subsys_resume_noirq - Run the device driver's "noirq" resume callback.
  * @dev: Device to handle.
  */
-int acpi_subsys_resume_noirq(struct device *dev)
+static int acpi_subsys_resume_noirq(struct device *dev)
 {
 	if (dev_pm_may_skip_resume(dev))
 		return 0;
@@ -1088,7 +1135,6 @@ int acpi_subsys_resume_noirq(struct device *dev)
 
 	return pm_generic_resume_noirq(dev);
 }
-EXPORT_SYMBOL_GPL(acpi_subsys_resume_noirq);
 
 /**
  * acpi_subsys_resume_early - Resume device using ACPI.
@@ -1098,12 +1144,11 @@ EXPORT_SYMBOL_GPL(acpi_subsys_resume_noirq);
  * generic early resume procedure for it during system transition into the
  * working state.
  */
-int acpi_subsys_resume_early(struct device *dev)
+static int acpi_subsys_resume_early(struct device *dev)
 {
 	int ret = acpi_dev_resume(dev);
 	return ret ? ret : pm_generic_resume_early(dev);
 }
-EXPORT_SYMBOL_GPL(acpi_subsys_resume_early);
 
 /**
  * acpi_subsys_freeze - Run the device driver's freeze callback.
@@ -1112,65 +1157,81 @@ EXPORT_SYMBOL_GPL(acpi_subsys_resume_early);
 int acpi_subsys_freeze(struct device *dev)
 {
 	/*
-	 * This used to be done in acpi_subsys_prepare() for all devices and
-	 * some drivers may depend on it, so do it here.  Ideally, however,
-	 * runtime-suspended devices should not be touched during freeze/thaw
-	 * transitions.
+	 * Resume all runtime-suspended devices before creating a snapshot
+	 * image of system memory, because the restore kernel generally cannot
+	 * be expected to always handle them consistently and they need to be
+	 * put into the runtime-active metastate during system resume anyway,
+	 * so it is better to ensure that the state saved in the image will be
+	 * always consistent with that.
 	 */
-	if (!dev_pm_test_driver_flags(dev, DPM_FLAG_SMART_SUSPEND))
-		pm_runtime_resume(dev);
+	pm_runtime_resume(dev);
 
 	return pm_generic_freeze(dev);
 }
 EXPORT_SYMBOL_GPL(acpi_subsys_freeze);
 
 /**
- * acpi_subsys_freeze_late - Run the device driver's "late" freeze callback.
- * @dev: Device to handle.
+ * acpi_subsys_restore_early - Restore device using ACPI.
+ * @dev: Device to restore.
  */
-int acpi_subsys_freeze_late(struct device *dev)
+int acpi_subsys_restore_early(struct device *dev)
 {
+	int ret = acpi_dev_resume(dev);
+	return ret ? ret : pm_generic_restore_early(dev);
+}
+EXPORT_SYMBOL_GPL(acpi_subsys_restore_early);
 
-	if (dev_pm_smart_suspend_and_suspended(dev))
-		return 0;
+/**
+ * acpi_subsys_poweroff - Run the device driver's poweroff callback.
+ * @dev: Device to handle.
+ *
+ * Follow PCI and resume devices from runtime suspend before running their
+ * system poweroff callbacks, unless the driver can cope with runtime-suspended
+ * devices during system suspend and there are no ACPI-specific reasons for
+ * resuming them.
+ */
+int acpi_subsys_poweroff(struct device *dev)
+{
+	if (!dev_pm_test_driver_flags(dev, DPM_FLAG_SMART_SUSPEND) ||
+	    acpi_dev_needs_resume(dev, ACPI_COMPANION(dev)))
+		pm_runtime_resume(dev);
 
-	return pm_generic_freeze_late(dev);
+	return pm_generic_poweroff(dev);
 }
-EXPORT_SYMBOL_GPL(acpi_subsys_freeze_late);
+EXPORT_SYMBOL_GPL(acpi_subsys_poweroff);
 
 /**
- * acpi_subsys_freeze_noirq - Run the device driver's "noirq" freeze callback.
+ * acpi_subsys_poweroff_late - Run the device driver's poweroff callback.
  * @dev: Device to handle.
+ *
+ * Carry out the generic late poweroff procedure for @dev and use ACPI to put
+ * it into a low-power state during system transition into a sleep state.
  */
-int acpi_subsys_freeze_noirq(struct device *dev)
+static int acpi_subsys_poweroff_late(struct device *dev)
 {
+	int ret;
 
 	if (dev_pm_smart_suspend_and_suspended(dev))
 		return 0;
 
-	return pm_generic_freeze_noirq(dev);
+	ret = pm_generic_poweroff_late(dev);
+	if (ret)
+		return ret;
+
+	return acpi_dev_suspend(dev, device_may_wakeup(dev));
 }
-EXPORT_SYMBOL_GPL(acpi_subsys_freeze_noirq);
 
 /**
- * acpi_subsys_thaw_noirq - Run the device driver's "noirq" thaw callback.
- * @dev: Device to handle.
+ * acpi_subsys_poweroff_noirq - Run the driver's "noirq" poweroff callback.
+ * @dev: Device to suspend.
  */
-int acpi_subsys_thaw_noirq(struct device *dev)
+static int acpi_subsys_poweroff_noirq(struct device *dev)
 {
-	/*
-	 * If the device is in runtime suspend, the "thaw" code may not work
-	 * correctly with it, so skip the driver callback and make the PM core
-	 * skip all of the subsequent "thaw" callbacks for the device.
-	 */
-	if (dev_pm_smart_suspend_and_suspended(dev)) {
-		dev_pm_skip_next_resume_phases(dev);
+	if (dev_pm_smart_suspend_and_suspended(dev))
 		return 0;
-	}
 
-	return pm_generic_thaw_noirq(dev);
+	return pm_generic_poweroff_noirq(dev);
 }
-EXPORT_SYMBOL_GPL(acpi_subsys_thaw_noirq);
 #endif /* CONFIG_PM_SLEEP */
 
 static struct dev_pm_domain acpi_general_pm_domain = {
@@ -1186,14 +1247,10 @@ static struct dev_pm_domain acpi_general_pm_domain = {
 		.resume_noirq = acpi_subsys_resume_noirq,
 		.resume_early = acpi_subsys_resume_early,
 		.freeze = acpi_subsys_freeze,
-		.freeze_late = acpi_subsys_freeze_late,
-		.freeze_noirq = acpi_subsys_freeze_noirq,
-		.thaw_noirq = acpi_subsys_thaw_noirq,
-		.poweroff = acpi_subsys_suspend,
-		.poweroff_late = acpi_subsys_suspend_late,
-		.poweroff_noirq = acpi_subsys_suspend_noirq,
-		.restore_noirq = acpi_subsys_resume_noirq,
-		.restore_early = acpi_subsys_resume_early,
+		.poweroff = acpi_subsys_poweroff,
+		.poweroff_late = acpi_subsys_poweroff_late,
+		.poweroff_noirq = acpi_subsys_poweroff_noirq,
+		.restore_early = acpi_subsys_restore_early,
 #endif
 	},
 };
diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h
index f6157d4d637a..f4c2fe6be4f2 100644
--- a/drivers/acpi/internal.h
+++ b/drivers/acpi/internal.h
@@ -139,8 +139,15 @@ int acpi_power_get_inferred_state(struct acpi_device *device, int *state);
 int acpi_power_on_resources(struct acpi_device *device, int state);
 int acpi_power_transition(struct acpi_device *device, int state);
 
+/* --------------------------------------------------------------------------
+                              Device Power Management
+   -------------------------------------------------------------------------- */
+int acpi_device_get_power(struct acpi_device *device, int *state);
 int acpi_wakeup_device_init(void);
 
+/* --------------------------------------------------------------------------
+                                  Processor
+   -------------------------------------------------------------------------- */
 #ifdef CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC
 void acpi_early_processor_set_pdc(void);
 #else
diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c
index a916417b9e70..fe1e7bc91a5e 100644
--- a/drivers/acpi/power.c
+++ b/drivers/acpi/power.c
@@ -42,6 +42,11 @@ ACPI_MODULE_NAME("power");
 #define ACPI_POWER_RESOURCE_STATE_ON	0x01
 #define ACPI_POWER_RESOURCE_STATE_UNKNOWN 0xFF
 
+struct acpi_power_dependent_device {
+	struct device *dev;
+	struct list_head node;
+};
+
 struct acpi_power_resource {
 	struct acpi_device device;
 	struct list_head list_node;
@@ -51,6 +56,7 @@ struct acpi_power_resource {
 	unsigned int ref_count;
 	bool wakeup_enabled;
 	struct mutex resource_lock;
+	struct list_head dependents;
 };
 
 struct acpi_power_resource_entry {
@@ -232,8 +238,121 @@ static int acpi_power_get_list_state(struct list_head *list, int *state)
 	return 0;
 }
 
+static int
+acpi_power_resource_add_dependent(struct acpi_power_resource *resource,
+				  struct device *dev)
+{
+	struct acpi_power_dependent_device *dep;
+	int ret = 0;
+
+	mutex_lock(&resource->resource_lock);
+	list_for_each_entry(dep, &resource->dependents, node) {
+		/* Only add it once */
+		if (dep->dev == dev)
+			goto unlock;
+	}
+
+	dep = kzalloc(sizeof(*dep), GFP_KERNEL);
+	if (!dep) {
+		ret = -ENOMEM;
+		goto unlock;
+	}
+
+	dep->dev = dev;
+	list_add_tail(&dep->node, &resource->dependents);
+	dev_dbg(dev, "added power dependency to [%s]\n", resource->name);
+
+unlock:
+	mutex_unlock(&resource->resource_lock);
+	return ret;
+}
+
+static void
+acpi_power_resource_remove_dependent(struct acpi_power_resource *resource,
+				     struct device *dev)
+{
+	struct acpi_power_dependent_device *dep;
+
+	mutex_lock(&resource->resource_lock);
+	list_for_each_entry(dep, &resource->dependents, node) {
+		if (dep->dev == dev) {
+			list_del(&dep->node);
+			kfree(dep);
+			dev_dbg(dev, "removed power dependency to [%s]\n",
+				resource->name);
+			break;
+		}
+	}
+	mutex_unlock(&resource->resource_lock);
+}
+
+/**
+ * acpi_device_power_add_dependent - Add dependent device of this ACPI device
+ * @adev: ACPI device pointer
+ * @dev: Dependent device
+ *
+ * If @adev has non-empty _PR0 the @dev is added as dependent device to all
+ * power resources returned by it. This means that whenever these power
+ * resources are turned _ON the dependent devices get runtime resumed. This
+ * is needed for devices such as PCI to allow its driver to re-initialize
+ * it after it went to D0uninitialized.
+ *
+ * If @adev does not have _PR0 this does nothing.
+ *
+ * Returns %0 in case of success and negative errno otherwise.
+ */
+int acpi_device_power_add_dependent(struct acpi_device *adev,
+				    struct device *dev)
+{
+	struct acpi_power_resource_entry *entry;
+	struct list_head *resources;
+	int ret;
+
+	if (!adev->flags.power_manageable)
+		return 0;
+
+	resources = &adev->power.states[ACPI_STATE_D0].resources;
+	list_for_each_entry(entry, resources, node) {
+		ret = acpi_power_resource_add_dependent(entry->resource, dev);
+		if (ret)
+			goto err;
+	}
+
+	return 0;
+
+err:
+	list_for_each_entry(entry, resources, node)
+		acpi_power_resource_remove_dependent(entry->resource, dev);
+
+	return ret;
+}
+
+/**
+ * acpi_device_power_remove_dependent - Remove dependent device
+ * @adev: ACPI device pointer
+ * @dev: Dependent device
+ *
+ * Does the opposite of acpi_device_power_add_dependent() and removes the
+ * dependent device if it is found. Can be called to @adev that does not
+ * have _PR0 as well.
+ */
+void acpi_device_power_remove_dependent(struct acpi_device *adev,
+					struct device *dev)
+{
+	struct acpi_power_resource_entry *entry;
+	struct list_head *resources;
+
+	if (!adev->flags.power_manageable)
+		return;
+
+	resources = &adev->power.states[ACPI_STATE_D0].resources;
+	list_for_each_entry_reverse(entry, resources, node)
+		acpi_power_resource_remove_dependent(entry->resource, dev);
+}
+
 static int __acpi_power_on(struct acpi_power_resource *resource)
 {
+	struct acpi_power_dependent_device *dep;
 	acpi_status status = AE_OK;
 
 	status = acpi_evaluate_object(resource->device.handle, "_ON", NULL, NULL);
@@ -243,6 +362,21 @@ static int __acpi_power_on(struct acpi_power_resource *resource)
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Power resource [%s] turned on\n",
 			  resource->name));
 
+	/*
+	 * If there are other dependents on this power resource we need to
+	 * resume them now so that their drivers can re-initialize the
+	 * hardware properly after it went back to D0.
+	 */
+	if (list_empty(&resource->dependents) ||
+	    list_is_singular(&resource->dependents))
+		return 0;
+
+	list_for_each_entry(dep, &resource->dependents, node) {
+		dev_dbg(dep->dev, "runtime resuming because [%s] turned on\n",
+			resource->name);
+		pm_request_resume(dep->dev);
+	}
+
 	return 0;
 }
 
@@ -810,6 +944,7 @@ int acpi_add_power_resource(acpi_handle handle)
 				ACPI_STA_DEFAULT);
 	mutex_init(&resource->resource_lock);
 	INIT_LIST_HEAD(&resource->list_node);
+	INIT_LIST_HEAD(&resource->dependents);
 	resource->name = device->pnp.bus_id;
 	strcpy(acpi_device_name(device), ACPI_POWER_DEVICE_NAME);
 	strcpy(acpi_device_class(device), ACPI_POWER_CLASS);
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 8ff08e531443..f0fe7c15d657 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -77,7 +77,7 @@ static int acpi_sleep_prepare(u32 acpi_state)
 	return 0;
 }
 
-static bool acpi_sleep_state_supported(u8 sleep_state)
+bool acpi_sleep_state_supported(u8 sleep_state)
 {
 	acpi_status status;
 	u8 type_a, type_b;
@@ -452,14 +452,6 @@ static int acpi_pm_prepare(void)
 	return error;
 }
 
-static int find_powerf_dev(struct device *dev, void *data)
-{
-	struct acpi_device *device = to_acpi_device(dev);
-	const char *hid = acpi_device_hid(device);
-
-	return !strcmp(hid, ACPI_BUTTON_HID_POWERF);
-}
-
 /**
  *	acpi_pm_finish - Instruct the platform to leave a sleep state.
  *
@@ -468,7 +460,7 @@ static int find_powerf_dev(struct device *dev, void *data)
  */
 static void acpi_pm_finish(void)
 {
-	struct device *pwr_btn_dev;
+	struct acpi_device *pwr_btn_adev;
 	u32 acpi_state = acpi_target_sleep_state;
 
 	acpi_ec_unblock_transactions();
@@ -499,11 +491,11 @@ static void acpi_pm_finish(void)
 		return;
 
 	pwr_btn_event_pending = false;
-	pwr_btn_dev = bus_find_device(&acpi_bus_type, NULL, NULL,
-				      find_powerf_dev);
-	if (pwr_btn_dev) {
-		pm_wakeup_event(pwr_btn_dev, 0);
-		put_device(pwr_btn_dev);
+	pwr_btn_adev = acpi_dev_get_first_match_dev(ACPI_BUTTON_HID_POWERF,
+						    NULL, -1);
+	if (pwr_btn_adev) {
+		pm_wakeup_event(&pwr_btn_adev->dev, 0);
+		acpi_dev_put(pwr_btn_adev);
 	}
 }
 
diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c
index 59d19dd64928..ced6863a16a5 100644
--- a/drivers/base/power/clock_ops.c
+++ b/drivers/base/power/clock_ops.c
@@ -12,6 +12,7 @@
 #include <linux/pm_clock.h>
 #include <linux/clk.h>
 #include <linux/clkdev.h>
+#include <linux/of_clk.h>
 #include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/pm_domain.h>
@@ -92,8 +93,6 @@ static int __pm_clk_add(struct device *dev, const char *con_id,
 	if (con_id) {
 		ce->con_id = kstrdup(con_id, GFP_KERNEL);
 		if (!ce->con_id) {
-			dev_err(dev,
-				"Not enough memory for clock connection ID.\n");
 			kfree(ce);
 			return -ENOMEM;
 		}
@@ -195,8 +194,7 @@ int of_pm_clk_add_clks(struct device *dev)
 	if (!dev || !dev->of_node)
 		return -EINVAL;
 
-	count = of_count_phandle_with_args(dev->of_node, "clocks",
-					   "#clock-cells");
+	count = of_clk_get_parent_count(dev->of_node);
 	if (count <= 0)
 		return -ENODEV;
 
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index dcfc0a36c8f7..7fb2c39bc725 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -530,21 +530,6 @@ static void dpm_watchdog_clear(struct dpm_watchdog *wd)
 /*------------------------- Resume routines -------------------------*/
 
 /**
- * dev_pm_skip_next_resume_phases - Skip next system resume phases for device.
- * @dev: Target device.
- *
- * Make the core skip the "early resume" and "resume" phases for @dev.
- *
- * This function can be called by middle-layer code during the "noirq" phase of
- * system resume if necessary, but not by device drivers.
- */
-void dev_pm_skip_next_resume_phases(struct device *dev)
-{
-	dev->power.is_late_suspended = false;
-	dev->power.is_suspended = false;
-}
-
-/**
  * suspend_event - Return a "suspend" message for given "resume" one.
  * @resume_msg: PM message representing a system-wide resume transition.
  */
@@ -681,6 +666,9 @@ Skip:
 	dev->power.is_noirq_suspended = false;
 
 	if (skip_resume) {
+		/* Make the next phases of resume skip the device. */
+		dev->power.is_late_suspended = false;
+		dev->power.is_suspended = false;
 		/*
 		 * The device is going to be left in suspend, but it might not
 		 * have been in runtime suspend before the system suspended, so
@@ -689,7 +677,6 @@ Skip:
 		 * device again.
 		 */
 		pm_runtime_set_suspended(dev);
-		dev_pm_skip_next_resume_phases(dev);
 	}
 
 Out:
@@ -1631,17 +1618,20 @@ int dpm_suspend_late(pm_message_t state)
  */
 int dpm_suspend_end(pm_message_t state)
 {
-	int error = dpm_suspend_late(state);
+	ktime_t starttime = ktime_get();
+	int error;
+
+	error = dpm_suspend_late(state);
 	if (error)
-		return error;
+		goto out;
 
 	error = dpm_suspend_noirq(state);
-	if (error) {
+	if (error)
 		dpm_resume_early(resume_event(state));
-		return error;
-	}
 
-	return 0;
+out:
+	dpm_show_time(starttime, state, error, "end");
+	return error;
 }
 EXPORT_SYMBOL_GPL(dpm_suspend_end);
 
@@ -2034,6 +2024,7 @@ int dpm_prepare(pm_message_t state)
  */
 int dpm_suspend_start(pm_message_t state)
 {
+	ktime_t starttime = ktime_get();
 	int error;
 
 	error = dpm_prepare(state);
@@ -2042,6 +2033,7 @@ int dpm_suspend_start(pm_message_t state)
 		dpm_save_failed_step(SUSPEND_PREPARE);
 	} else
 		error = dpm_suspend(state);
+	dpm_show_time(starttime, state, error, "start");
 	return error;
 }
 EXPORT_SYMBOL_GPL(dpm_suspend_start);
diff --git a/drivers/base/power/wakeup.c b/drivers/base/power/wakeup.c
index 5b2b6a05a4f3..ee31d4f8d856 100644
--- a/drivers/base/power/wakeup.c
+++ b/drivers/base/power/wakeup.c
@@ -968,8 +968,6 @@ void pm_wakep_autosleep_enabled(bool set)
 }
 #endif /* CONFIG_PM_AUTOSLEEP */
 
-static struct dentry *wakeup_sources_stats_dentry;
-
 /**
  * print_wakeup_source_stats - Print wakeup source statistics information.
  * @m: seq_file to print the statistics into.
@@ -1099,8 +1097,8 @@ static const struct file_operations wakeup_sources_stats_fops = {
 
 static int __init wakeup_sources_debugfs_init(void)
 {
-	wakeup_sources_stats_dentry = debugfs_create_file("wakeup_sources",
-			S_IRUGO, NULL, NULL, &wakeup_sources_stats_fops);
+	debugfs_create_file("wakeup_sources", S_IRUGO, NULL, NULL,
+			    &wakeup_sources_stats_fops);
 	return 0;
 }
 
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index f8129edc145e..56c31a78c692 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -93,6 +93,15 @@ config ARM_IMX6Q_CPUFREQ
 
 	  If in doubt, say N.
 
+config ARM_IMX_CPUFREQ_DT
+	tristate "Freescale i.MX8M cpufreq support"
+	depends on ARCH_MXC && CPUFREQ_DT
+	help
+	  This adds cpufreq driver support for Freescale i.MX8M series SoCs,
+	  based on cpufreq-dt.
+
+	  If in doubt, say N.
+
 config ARM_KIRKWOOD_CPUFREQ
 	def_bool MACH_KIRKWOOD
 	help
@@ -133,6 +142,14 @@ config ARM_QCOM_CPUFREQ_HW
 	  The driver implements the cpufreq interface for this HW engine.
 	  Say Y if you want to support CPUFreq HW.
 
+config ARM_RASPBERRYPI_CPUFREQ
+	tristate "Raspberry Pi cpufreq support"
+	depends on CLK_RASPBERRYPI || COMPILE_TEST
+	help
+	  This adds the CPUFreq driver for Raspberry Pi
+
+	  If in doubt, say N.
+
 config ARM_S3C_CPUFREQ
 	bool
 	help
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 689b26c6f949..5a6c70d26c98 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -56,6 +56,7 @@ obj-$(CONFIG_ACPI_CPPC_CPUFREQ)		+= cppc_cpufreq.o
 obj-$(CONFIG_ARCH_DAVINCI)		+= davinci-cpufreq.o
 obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ)	+= highbank-cpufreq.o
 obj-$(CONFIG_ARM_IMX6Q_CPUFREQ)		+= imx6q-cpufreq.o
+obj-$(CONFIG_ARM_IMX_CPUFREQ_DT)	+= imx-cpufreq-dt.o
 obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ)	+= kirkwood-cpufreq.o
 obj-$(CONFIG_ARM_MEDIATEK_CPUFREQ)	+= mediatek-cpufreq.o
 obj-$(CONFIG_MACH_MVEBU_V7)		+= mvebu-cpufreq.o
@@ -64,6 +65,7 @@ obj-$(CONFIG_ARM_PXA2xx_CPUFREQ)	+= pxa2xx-cpufreq.o
 obj-$(CONFIG_PXA3xx)			+= pxa3xx-cpufreq.o
 obj-$(CONFIG_ARM_QCOM_CPUFREQ_HW)	+= qcom-cpufreq-hw.o
 obj-$(CONFIG_ARM_QCOM_CPUFREQ_KRYO)	+= qcom-cpufreq-kryo.o
+obj-$(CONFIG_ARM_RASPBERRYPI_CPUFREQ) 	+= raspberrypi-cpufreq.o
 obj-$(CONFIG_ARM_S3C2410_CPUFREQ)	+= s3c2410-cpufreq.o
 obj-$(CONFIG_ARM_S3C2412_CPUFREQ)	+= s3c2412-cpufreq.o
 obj-$(CONFIG_ARM_S3C2416_CPUFREQ)	+= s3c2416-cpufreq.o
diff --git a/drivers/cpufreq/armada-37xx-cpufreq.c b/drivers/cpufreq/armada-37xx-cpufreq.c
index 0df16eb1eb3c..aa0f06dec959 100644
--- a/drivers/cpufreq/armada-37xx-cpufreq.c
+++ b/drivers/cpufreq/armada-37xx-cpufreq.c
@@ -257,7 +257,7 @@ static void __init armada37xx_cpufreq_avs_configure(struct regmap *base,
 static void __init armada37xx_cpufreq_avs_setup(struct regmap *base,
 						struct armada_37xx_dvfs *dvfs)
 {
-	unsigned int avs_val = 0, freq;
+	unsigned int avs_val = 0;
 	int load_level = 0;
 
 	if (base == NULL)
@@ -275,8 +275,6 @@ static void __init armada37xx_cpufreq_avs_setup(struct regmap *base,
 
 
 	for (load_level = 1; load_level < LOAD_LEVEL_NR; load_level++) {
-		freq = dvfs->cpu_freq_max / dvfs->divider[load_level];
-
 		avs_val = dvfs->avs[load_level];
 		regmap_update_bits(base, ARMADA_37XX_AVS_VSET(load_level-1),
 		    ARMADA_37XX_AVS_VDD_MASK << ARMADA_37XX_AVS_HIGH_VDD_LIMIT |
diff --git a/drivers/cpufreq/brcmstb-avs-cpufreq.c b/drivers/cpufreq/brcmstb-avs-cpufreq.c
index e6f9cbe5835f..77b0e5d0fb13 100644
--- a/drivers/cpufreq/brcmstb-avs-cpufreq.c
+++ b/drivers/cpufreq/brcmstb-avs-cpufreq.c
@@ -384,12 +384,12 @@ static int brcm_avs_set_pstate(struct private_data *priv, unsigned int pstate)
 	return __issue_avs_command(priv, AVS_CMD_SET_PSTATE, true, args);
 }
 
-static unsigned long brcm_avs_get_voltage(void __iomem *base)
+static u32 brcm_avs_get_voltage(void __iomem *base)
 {
 	return readl(base + AVS_MBOX_VOLTAGE1);
 }
 
-static unsigned long brcm_avs_get_frequency(void __iomem *base)
+static u32 brcm_avs_get_frequency(void __iomem *base)
 {
 	return readl(base + AVS_MBOX_FREQUENCY) * 1000;	/* in kHz */
 }
@@ -446,8 +446,8 @@ static bool brcm_avs_is_firmware_loaded(struct private_data *priv)
 	rc = brcm_avs_get_pmap(priv, NULL);
 	magic = readl(priv->base + AVS_MBOX_MAGIC);
 
-	return (magic == AVS_FIRMWARE_MAGIC) && (rc != -ENOTSUPP) &&
-		(rc != -EINVAL);
+	return (magic == AVS_FIRMWARE_MAGIC) && ((rc != -ENOTSUPP) ||
+		(rc != -EINVAL));
 }
 
 static unsigned int brcm_avs_cpufreq_get(unsigned int cpu)
@@ -653,14 +653,14 @@ static ssize_t show_brcm_avs_voltage(struct cpufreq_policy *policy, char *buf)
 {
 	struct private_data *priv = policy->driver_data;
 
-	return sprintf(buf, "0x%08lx\n", brcm_avs_get_voltage(priv->base));
+	return sprintf(buf, "0x%08x\n", brcm_avs_get_voltage(priv->base));
 }
 
 static ssize_t show_brcm_avs_frequency(struct cpufreq_policy *policy, char *buf)
 {
 	struct private_data *priv = policy->driver_data;
 
-	return sprintf(buf, "0x%08lx\n", brcm_avs_get_frequency(priv->base));
+	return sprintf(buf, "0x%08x\n", brcm_avs_get_frequency(priv->base));
 }
 
 cpufreq_freq_attr_ro(brcm_avs_pstate);
diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
index 88e00683eaeb..03dc4244ab00 100644
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -37,7 +37,6 @@ static const struct of_device_id whitelist[] __initconst = {
 	{ .compatible = "fsl,imx27", },
 	{ .compatible = "fsl,imx51", },
 	{ .compatible = "fsl,imx53", },
-	{ .compatible = "fsl,imx7d", },
 
 	{ .compatible = "marvell,berlin", },
 	{ .compatible = "marvell,pxa250", },
@@ -105,6 +104,10 @@ static const struct of_device_id blacklist[] __initconst = {
 	{ .compatible = "calxeda,highbank", },
 	{ .compatible = "calxeda,ecx-2000", },
 
+	{ .compatible = "fsl,imx7d", },
+	{ .compatible = "fsl,imx8mq", },
+	{ .compatible = "fsl,imx8mm", },
+
 	{ .compatible = "marvell,armadaxp", },
 
 	{ .compatible = "mediatek,mt2701", },
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index e84bf0eb7239..0a9f675f2af4 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -356,12 +356,10 @@ static void cpufreq_notify_transition(struct cpufreq_policy *policy,
 		 * which is not equal to what the cpufreq core thinks is
 		 * "old frequency".
 		 */
-		if (!(cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)) {
-			if (policy->cur && (policy->cur != freqs->old)) {
-				pr_debug("Warning: CPU frequency is %u, cpufreq assumed %u kHz\n",
-					 freqs->old, policy->cur);
-				freqs->old = policy->cur;
-			}
+		if (policy->cur && policy->cur != freqs->old) {
+			pr_debug("Warning: CPU frequency is %u, cpufreq assumed %u kHz\n",
+				 freqs->old, policy->cur);
+			freqs->old = policy->cur;
 		}
 
 		srcu_notifier_call_chain(&cpufreq_transition_notifier_list,
@@ -631,7 +629,7 @@ static int cpufreq_parse_policy(char *str_governor,
 }
 
 /**
- * cpufreq_parse_governor - parse a governor string only for !setpolicy
+ * cpufreq_parse_governor - parse a governor string only for has_target()
  */
 static int cpufreq_parse_governor(char *str_governor,
 				  struct cpufreq_policy *policy)
@@ -1114,13 +1112,25 @@ static int cpufreq_add_policy_cpu(struct cpufreq_policy *policy, unsigned int cp
 	return ret;
 }
 
+static void refresh_frequency_limits(struct cpufreq_policy *policy)
+{
+	struct cpufreq_policy new_policy = *policy;
+
+	pr_debug("updating policy for CPU %u\n", policy->cpu);
+
+	new_policy.min = policy->user_policy.min;
+	new_policy.max = policy->user_policy.max;
+
+	cpufreq_set_policy(policy, &new_policy);
+}
+
 static void handle_update(struct work_struct *work)
 {
 	struct cpufreq_policy *policy =
 		container_of(work, struct cpufreq_policy, update);
-	unsigned int cpu = policy->cpu;
-	pr_debug("handle_update for cpu %u called\n", cpu);
-	cpufreq_update_policy(cpu);
+
+	pr_debug("handle_update for cpu %u called\n", policy->cpu);
+	refresh_frequency_limits(policy);
 }
 
 static struct cpufreq_policy *cpufreq_policy_alloc(unsigned int cpu)
@@ -1300,7 +1310,7 @@ static int cpufreq_online(unsigned int cpu)
 		policy->max = policy->user_policy.max;
 	}
 
-	if (cpufreq_driver->get && !cpufreq_driver->setpolicy) {
+	if (cpufreq_driver->get && has_target()) {
 		policy->cur = cpufreq_driver->get(policy->cpu);
 		if (!policy->cur) {
 			pr_err("%s: ->get() failed\n", __func__);
@@ -1375,8 +1385,7 @@ static int cpufreq_online(unsigned int cpu)
 	if (cpufreq_driver->ready)
 		cpufreq_driver->ready(policy);
 
-	if (IS_ENABLED(CONFIG_CPU_THERMAL) &&
-	    cpufreq_driver->flags & CPUFREQ_IS_COOLING_DEV)
+	if (cpufreq_thermal_control_enabled(cpufreq_driver))
 		policy->cdev = of_cpufreq_cooling_register(policy);
 
 	pr_debug("initialization complete\n");
@@ -1466,8 +1475,7 @@ static int cpufreq_offline(unsigned int cpu)
 		goto unlock;
 	}
 
-	if (IS_ENABLED(CONFIG_CPU_THERMAL) &&
-	    cpufreq_driver->flags & CPUFREQ_IS_COOLING_DEV) {
+	if (cpufreq_thermal_control_enabled(cpufreq_driver)) {
 		cpufreq_cooling_unregister(policy->cdev);
 		policy->cdev = NULL;
 	}
@@ -1546,6 +1554,30 @@ static void cpufreq_out_of_sync(struct cpufreq_policy *policy,
 	cpufreq_freq_transition_end(policy, &freqs, 0);
 }
 
+static unsigned int cpufreq_verify_current_freq(struct cpufreq_policy *policy, bool update)
+{
+	unsigned int new_freq;
+
+	new_freq = cpufreq_driver->get(policy->cpu);
+	if (!new_freq)
+		return 0;
+
+	/*
+	 * If fast frequency switching is used with the given policy, the check
+	 * against policy->cur is pointless, so skip it in that case.
+	 */
+	if (policy->fast_switch_enabled || !has_target())
+		return new_freq;
+
+	if (policy->cur != new_freq) {
+		cpufreq_out_of_sync(policy, new_freq);
+		if (update)
+			schedule_work(&policy->update);
+	}
+
+	return new_freq;
+}
+
 /**
  * cpufreq_quick_get - get the CPU frequency (in kHz) from policy->cur
  * @cpu: CPU number
@@ -1601,31 +1633,10 @@ EXPORT_SYMBOL(cpufreq_quick_get_max);
 
 static unsigned int __cpufreq_get(struct cpufreq_policy *policy)
 {
-	unsigned int ret_freq = 0;
-
 	if (unlikely(policy_is_inactive(policy)))
-		return ret_freq;
-
-	ret_freq = cpufreq_driver->get(policy->cpu);
-
-	/*
-	 * If fast frequency switching is used with the given policy, the check
-	 * against policy->cur is pointless, so skip it in that case too.
-	 */
-	if (policy->fast_switch_enabled)
-		return ret_freq;
-
-	if (ret_freq && policy->cur &&
-		!(cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)) {
-		/* verify no discrepancy between actual and
-					saved value exists */
-		if (unlikely(ret_freq != policy->cur)) {
-			cpufreq_out_of_sync(policy, ret_freq);
-			schedule_work(&policy->update);
-		}
-	}
+		return 0;
 
-	return ret_freq;
+	return cpufreq_verify_current_freq(policy, true);
 }
 
 /**
@@ -1652,24 +1663,6 @@ unsigned int cpufreq_get(unsigned int cpu)
 }
 EXPORT_SYMBOL(cpufreq_get);
 
-static unsigned int cpufreq_update_current_freq(struct cpufreq_policy *policy)
-{
-	unsigned int new_freq;
-
-	new_freq = cpufreq_driver->get(policy->cpu);
-	if (!new_freq)
-		return 0;
-
-	if (!policy->cur) {
-		pr_debug("cpufreq: Driver did not initialize current freq\n");
-		policy->cur = new_freq;
-	} else if (policy->cur != new_freq && has_target()) {
-		cpufreq_out_of_sync(policy, new_freq);
-	}
-
-	return new_freq;
-}
-
 static struct subsys_interface cpufreq_interface = {
 	.name		= "cpufreq",
 	.subsys		= &cpu_subsys,
@@ -2150,8 +2143,8 @@ static int cpufreq_start_governor(struct cpufreq_policy *policy)
 
 	pr_debug("%s: for CPU %u\n", __func__, policy->cpu);
 
-	if (cpufreq_driver->get && !cpufreq_driver->setpolicy)
-		cpufreq_update_current_freq(policy);
+	if (cpufreq_driver->get)
+		cpufreq_verify_current_freq(policy, false);
 
 	if (policy->governor->start) {
 		ret = policy->governor->start(policy);
@@ -2392,7 +2385,6 @@ int cpufreq_set_policy(struct cpufreq_policy *policy,
 void cpufreq_update_policy(unsigned int cpu)
 {
 	struct cpufreq_policy *policy = cpufreq_cpu_acquire(cpu);
-	struct cpufreq_policy new_policy;
 
 	if (!policy)
 		return;
@@ -2401,16 +2393,11 @@ void cpufreq_update_policy(unsigned int cpu)
 	 * BIOS might change freq behind our back
 	 * -> ask driver for current freq and notify governors about a change
 	 */
-	if (cpufreq_driver->get && !cpufreq_driver->setpolicy &&
-	    (cpufreq_suspended || WARN_ON(!cpufreq_update_current_freq(policy))))
+	if (cpufreq_driver->get && has_target() &&
+	    (cpufreq_suspended || WARN_ON(!cpufreq_verify_current_freq(policy, false))))
 		goto unlock;
 
-	pr_debug("updating policy for CPU %u\n", cpu);
-	memcpy(&new_policy, policy, sizeof(*policy));
-	new_policy.min = policy->user_policy.min;
-	new_policy.max = policy->user_policy.max;
-
-	cpufreq_set_policy(policy, &new_policy);
+	refresh_frequency_limits(policy);
 
 unlock:
 	cpufreq_cpu_release(policy);
diff --git a/drivers/cpufreq/imx-cpufreq-dt.c b/drivers/cpufreq/imx-cpufreq-dt.c
new file mode 100644
index 000000000000..b54fd26ea7df
--- /dev/null
+++ b/drivers/cpufreq/imx-cpufreq-dt.c
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <linux/cpu.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+#include <linux/slab.h>
+
+#define OCOTP_CFG3_SPEED_GRADE_SHIFT	8
+#define OCOTP_CFG3_SPEED_GRADE_MASK	(0x3 << 8)
+#define OCOTP_CFG3_MKT_SEGMENT_SHIFT    6
+#define OCOTP_CFG3_MKT_SEGMENT_MASK     (0x3 << 6)
+
+/* cpufreq-dt device registered by imx-cpufreq-dt */
+static struct platform_device *cpufreq_dt_pdev;
+static struct opp_table *cpufreq_opp_table;
+
+static int imx_cpufreq_dt_probe(struct platform_device *pdev)
+{
+	struct device *cpu_dev = get_cpu_device(0);
+	u32 cell_value, supported_hw[2];
+	int speed_grade, mkt_segment;
+	int ret;
+
+	ret = nvmem_cell_read_u32(cpu_dev, "speed_grade", &cell_value);
+	if (ret)
+		return ret;
+
+	speed_grade = (cell_value & OCOTP_CFG3_SPEED_GRADE_MASK) >> OCOTP_CFG3_SPEED_GRADE_SHIFT;
+	mkt_segment = (cell_value & OCOTP_CFG3_MKT_SEGMENT_MASK) >> OCOTP_CFG3_MKT_SEGMENT_SHIFT;
+
+	/*
+	 * Early samples without fuses written report "0 0" which means
+	 * consumer segment and minimum speed grading.
+	 *
+	 * According to datasheet minimum speed grading is not supported for
+	 * consumer parts so clamp to 1 to avoid warning for "no OPPs"
+	 *
+	 * Applies to 8mq and 8mm.
+	 */
+	if (mkt_segment == 0 && speed_grade == 0 && (
+			of_machine_is_compatible("fsl,imx8mm") ||
+			of_machine_is_compatible("fsl,imx8mq")))
+		speed_grade = 1;
+
+	supported_hw[0] = BIT(speed_grade);
+	supported_hw[1] = BIT(mkt_segment);
+	dev_info(&pdev->dev, "cpu speed grade %d mkt segment %d supported-hw %#x %#x\n",
+			speed_grade, mkt_segment, supported_hw[0], supported_hw[1]);
+
+	cpufreq_opp_table = dev_pm_opp_set_supported_hw(cpu_dev, supported_hw, 2);
+	if (IS_ERR(cpufreq_opp_table)) {
+		ret = PTR_ERR(cpufreq_opp_table);
+		dev_err(&pdev->dev, "Failed to set supported opp: %d\n", ret);
+		return ret;
+	}
+
+	cpufreq_dt_pdev = platform_device_register_data(
+			&pdev->dev, "cpufreq-dt", -1, NULL, 0);
+	if (IS_ERR(cpufreq_dt_pdev)) {
+		dev_pm_opp_put_supported_hw(cpufreq_opp_table);
+		ret = PTR_ERR(cpufreq_dt_pdev);
+		dev_err(&pdev->dev, "Failed to register cpufreq-dt: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int imx_cpufreq_dt_remove(struct platform_device *pdev)
+{
+	platform_device_unregister(cpufreq_dt_pdev);
+	dev_pm_opp_put_supported_hw(cpufreq_opp_table);
+
+	return 0;
+}
+
+static struct platform_driver imx_cpufreq_dt_driver = {
+	.probe = imx_cpufreq_dt_probe,
+	.remove = imx_cpufreq_dt_remove,
+	.driver = {
+		.name = "imx-cpufreq-dt",
+	},
+};
+module_platform_driver(imx_cpufreq_dt_driver);
+
+MODULE_ALIAS("platform:imx-cpufreq-dt");
+MODULE_DESCRIPTION("Freescale i.MX cpufreq speed grading driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/cpufreq/pcc-cpufreq.c b/drivers/cpufreq/pcc-cpufreq.c
index 1e5e64643c3a..fdc767fdbe6a 100644
--- a/drivers/cpufreq/pcc-cpufreq.c
+++ b/drivers/cpufreq/pcc-cpufreq.c
@@ -582,10 +582,10 @@ static int __init pcc_cpufreq_init(void)
 
 	/* Skip initialization if another cpufreq driver is there. */
 	if (cpufreq_get_current_driver())
-		return 0;
+		return -EEXIST;
 
 	if (acpi_disabled)
-		return 0;
+		return -ENODEV;
 
 	ret = pcc_cpufreq_probe();
 	if (ret) {
diff --git a/drivers/cpufreq/raspberrypi-cpufreq.c b/drivers/cpufreq/raspberrypi-cpufreq.c
new file mode 100644
index 000000000000..2bc7d9734272
--- /dev/null
+++ b/drivers/cpufreq/raspberrypi-cpufreq.c
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Raspberry Pi cpufreq driver
+ *
+ * Copyright (C) 2019, Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+ */
+
+#include <linux/clk.h>
+#include <linux/cpu.h>
+#include <linux/cpufreq.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+
+#define RASPBERRYPI_FREQ_INTERVAL	100000000
+
+static struct platform_device *cpufreq_dt;
+
+static int raspberrypi_cpufreq_probe(struct platform_device *pdev)
+{
+	struct device *cpu_dev;
+	unsigned long min, max;
+	unsigned long rate;
+	struct clk *clk;
+	int ret;
+
+	cpu_dev = get_cpu_device(0);
+	if (!cpu_dev) {
+		pr_err("Cannot get CPU for cpufreq driver\n");
+		return -ENODEV;
+	}
+
+	clk = clk_get(cpu_dev, NULL);
+	if (IS_ERR(clk)) {
+		dev_err(cpu_dev, "Cannot get clock for CPU0\n");
+		return PTR_ERR(clk);
+	}
+
+	/*
+	 * The max and min frequencies are configurable in the Raspberry Pi
+	 * firmware, so we query them at runtime.
+	 */
+	min = roundup(clk_round_rate(clk, 0), RASPBERRYPI_FREQ_INTERVAL);
+	max = roundup(clk_round_rate(clk, ULONG_MAX), RASPBERRYPI_FREQ_INTERVAL);
+	clk_put(clk);
+
+	for (rate = min; rate <= max; rate += RASPBERRYPI_FREQ_INTERVAL) {
+		ret = dev_pm_opp_add(cpu_dev, rate, 0);
+		if (ret)
+			goto remove_opp;
+	}
+
+	cpufreq_dt = platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
+	ret = PTR_ERR_OR_ZERO(cpufreq_dt);
+	if (ret) {
+		dev_err(cpu_dev, "Failed to create platform device, %d\n", ret);
+		goto remove_opp;
+	}
+
+	return 0;
+
+remove_opp:
+	dev_pm_opp_remove_all_dynamic(cpu_dev);
+
+	return ret;
+}
+
+static int raspberrypi_cpufreq_remove(struct platform_device *pdev)
+{
+	struct device *cpu_dev;
+
+	cpu_dev = get_cpu_device(0);
+	if (cpu_dev)
+		dev_pm_opp_remove_all_dynamic(cpu_dev);
+
+	platform_device_unregister(cpufreq_dt);
+
+	return 0;
+}
+
+/*
+ * Since the driver depends on clk-raspberrypi, which may return EPROBE_DEFER,
+ * all the activity is performed in the probe, which may be defered as well.
+ */
+static struct platform_driver raspberrypi_cpufreq_driver = {
+	.driver = {
+		.name = "raspberrypi-cpufreq",
+	},
+	.probe          = raspberrypi_cpufreq_probe,
+	.remove		= raspberrypi_cpufreq_remove,
+};
+module_platform_driver(raspberrypi_cpufreq_driver);
+
+MODULE_AUTHOR("Nicolas Saenz Julienne <nsaenzjulienne@suse.de");
+MODULE_DESCRIPTION("Raspberry Pi cpufreq driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:raspberrypi-cpufreq");
diff --git a/drivers/cpufreq/s5pv210-cpufreq.c b/drivers/cpufreq/s5pv210-cpufreq.c
index 57e5374592bd..e5cb17d4be7b 100644
--- a/drivers/cpufreq/s5pv210-cpufreq.c
+++ b/drivers/cpufreq/s5pv210-cpufreq.c
@@ -478,7 +478,7 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
 				arm_volt, arm_volt_max);
 	}
 
-	printk(KERN_DEBUG "Perf changed[L%d]\n", index);
+	pr_debug("Perf changed[L%d]\n", index);
 
 exit:
 	mutex_unlock(&set_freq_lock);
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index e4352741c467..b695094290ab 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -1406,7 +1406,7 @@ static void __init i8042_register_ports(void)
 		 * behavior on many platforms using suspend-to-RAM (ACPI S3)
 		 * by default.
 		 */
-		if (pm_suspend_via_s2idle() && i == I8042_KBD_PORT_NO)
+		if (pm_suspend_default_s2idle() && i == I8042_KBD_PORT_NO)
 			device_set_wakeup_enable(&serio->dev, true);
 	}
 }
diff --git a/drivers/opp/core.c b/drivers/opp/core.c
index 3a9789388bfb..c094d5d20fd7 100644
--- a/drivers/opp/core.c
+++ b/drivers/opp/core.c
@@ -682,7 +682,7 @@ static int _set_opp_custom(const struct opp_table *opp_table,
 
 	data->old_opp.rate = old_freq;
 	size = sizeof(*old_supply) * opp_table->regulator_count;
-	if (IS_ERR(old_supply))
+	if (!old_supply)
 		memset(data->old_opp.supplies, 0, size);
 	else
 		memcpy(data->old_opp.supplies, old_supply, size);
@@ -708,7 +708,7 @@ static int _set_required_opps(struct device *dev,
 
 	/* Single genpd case */
 	if (!genpd_virt_devs) {
-		pstate = opp->required_opps[0]->pstate;
+		pstate = likely(opp) ? opp->required_opps[0]->pstate : 0;
 		ret = dev_pm_genpd_set_performance_state(dev, pstate);
 		if (ret) {
 			dev_err(dev, "Failed to set performance state of %s: %d (%d)\n",
@@ -726,7 +726,7 @@ static int _set_required_opps(struct device *dev,
 	mutex_lock(&opp_table->genpd_virt_dev_lock);
 
 	for (i = 0; i < opp_table->required_opp_count; i++) {
-		pstate = opp->required_opps[i]->pstate;
+		pstate = likely(opp) ? opp->required_opps[i]->pstate : 0;
 
 		if (!genpd_virt_devs[i])
 			continue;
@@ -748,29 +748,37 @@ static int _set_required_opps(struct device *dev,
  * @dev:	 device for which we do this operation
  * @target_freq: frequency to achieve
  *
- * This configures the power-supplies and clock source to the levels specified
- * by the OPP corresponding to the target_freq.
+ * This configures the power-supplies to the levels specified by the OPP
+ * corresponding to the target_freq, and programs the clock to a value <=
+ * target_freq, as rounded by clk_round_rate(). Device wanting to run at fmax
+ * provided by the opp, should have already rounded to the target OPP's
+ * frequency.
  */
 int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
 {
 	struct opp_table *opp_table;
-	unsigned long freq, old_freq;
+	unsigned long freq, old_freq, temp_freq;
 	struct dev_pm_opp *old_opp, *opp;
 	struct clk *clk;
 	int ret;
 
-	if (unlikely(!target_freq)) {
-		dev_err(dev, "%s: Invalid target frequency %lu\n", __func__,
-			target_freq);
-		return -EINVAL;
-	}
-
 	opp_table = _find_opp_table(dev);
 	if (IS_ERR(opp_table)) {
 		dev_err(dev, "%s: device opp doesn't exist\n", __func__);
 		return PTR_ERR(opp_table);
 	}
 
+	if (unlikely(!target_freq)) {
+		if (opp_table->required_opp_tables) {
+			ret = _set_required_opps(dev, opp_table, NULL);
+		} else {
+			dev_err(dev, "target frequency can't be 0\n");
+			ret = -EINVAL;
+		}
+
+		goto put_opp_table;
+	}
+
 	clk = opp_table->clk;
 	if (IS_ERR(clk)) {
 		dev_err(dev, "%s: No clock available for the device\n",
@@ -793,13 +801,15 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
 		goto put_opp_table;
 	}
 
-	old_opp = _find_freq_ceil(opp_table, &old_freq);
+	temp_freq = old_freq;
+	old_opp = _find_freq_ceil(opp_table, &temp_freq);
 	if (IS_ERR(old_opp)) {
 		dev_err(dev, "%s: failed to find current OPP for freq %lu (%ld)\n",
 			__func__, old_freq, PTR_ERR(old_opp));
 	}
 
-	opp = _find_freq_ceil(opp_table, &freq);
+	temp_freq = freq;
+	opp = _find_freq_ceil(opp_table, &temp_freq);
 	if (IS_ERR(opp)) {
 		ret = PTR_ERR(opp);
 		dev_err(dev, "%s: failed to find OPP for freq %lu (%d)\n",
@@ -1741,91 +1751,137 @@ void dev_pm_opp_unregister_set_opp_helper(struct opp_table *opp_table)
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_unregister_set_opp_helper);
 
+static void _opp_detach_genpd(struct opp_table *opp_table)
+{
+	int index;
+
+	for (index = 0; index < opp_table->required_opp_count; index++) {
+		if (!opp_table->genpd_virt_devs[index])
+			continue;
+
+		dev_pm_domain_detach(opp_table->genpd_virt_devs[index], false);
+		opp_table->genpd_virt_devs[index] = NULL;
+	}
+
+	kfree(opp_table->genpd_virt_devs);
+	opp_table->genpd_virt_devs = NULL;
+}
+
 /**
- * dev_pm_opp_set_genpd_virt_dev - Set virtual genpd device for an index
- * @dev: Consumer device for which the genpd device is getting set.
- * @virt_dev: virtual genpd device.
- * @index: index.
+ * dev_pm_opp_attach_genpd - Attach genpd(s) for the device and save virtual device pointer
+ * @dev: Consumer device for which the genpd is getting attached.
+ * @names: Null terminated array of pointers containing names of genpd to attach.
  *
  * Multiple generic power domains for a device are supported with the help of
  * virtual genpd devices, which are created for each consumer device - genpd
  * pair. These are the device structures which are attached to the power domain
  * and are required by the OPP core to set the performance state of the genpd.
+ * The same API also works for the case where single genpd is available and so
+ * we don't need to support that separately.
  *
  * This helper will normally be called by the consumer driver of the device
- * "dev", as only that has details of the genpd devices.
+ * "dev", as only that has details of the genpd names.
  *
- * This helper needs to be called once for each of those virtual devices, but
- * only if multiple domains are available for a device. Otherwise the original
- * device structure will be used instead by the OPP core.
+ * This helper needs to be called once with a list of all genpd to attach.
+ * Otherwise the original device structure will be used instead by the OPP core.
  */
-struct opp_table *dev_pm_opp_set_genpd_virt_dev(struct device *dev,
-						struct device *virt_dev,
-						int index)
+struct opp_table *dev_pm_opp_attach_genpd(struct device *dev, const char **names)
 {
 	struct opp_table *opp_table;
+	struct device *virt_dev;
+	int index, ret = -EINVAL;
+	const char **name = names;
 
 	opp_table = dev_pm_opp_get_opp_table(dev);
 	if (!opp_table)
 		return ERR_PTR(-ENOMEM);
 
+	/*
+	 * If the genpd's OPP table isn't already initialized, parsing of the
+	 * required-opps fail for dev. We should retry this after genpd's OPP
+	 * table is added.
+	 */
+	if (!opp_table->required_opp_count) {
+		ret = -EPROBE_DEFER;
+		goto put_table;
+	}
+
 	mutex_lock(&opp_table->genpd_virt_dev_lock);
 
-	if (unlikely(!opp_table->genpd_virt_devs ||
-		     index >= opp_table->required_opp_count ||
-		     opp_table->genpd_virt_devs[index])) {
+	opp_table->genpd_virt_devs = kcalloc(opp_table->required_opp_count,
+					     sizeof(*opp_table->genpd_virt_devs),
+					     GFP_KERNEL);
+	if (!opp_table->genpd_virt_devs)
+		goto unlock;
 
-		dev_err(dev, "Invalid request to set required device\n");
-		dev_pm_opp_put_opp_table(opp_table);
-		mutex_unlock(&opp_table->genpd_virt_dev_lock);
+	while (*name) {
+		index = of_property_match_string(dev->of_node,
+						 "power-domain-names", *name);
+		if (index < 0) {
+			dev_err(dev, "Failed to find power domain: %s (%d)\n",
+				*name, index);
+			goto err;
+		}
 
-		return ERR_PTR(-EINVAL);
+		if (index >= opp_table->required_opp_count) {
+			dev_err(dev, "Index can't be greater than required-opp-count - 1, %s (%d : %d)\n",
+				*name, opp_table->required_opp_count, index);
+			goto err;
+		}
+
+		if (opp_table->genpd_virt_devs[index]) {
+			dev_err(dev, "Genpd virtual device already set %s\n",
+				*name);
+			goto err;
+		}
+
+		virt_dev = dev_pm_domain_attach_by_name(dev, *name);
+		if (IS_ERR(virt_dev)) {
+			ret = PTR_ERR(virt_dev);
+			dev_err(dev, "Couldn't attach to pm_domain: %d\n", ret);
+			goto err;
+		}
+
+		opp_table->genpd_virt_devs[index] = virt_dev;
+		name++;
 	}
 
-	opp_table->genpd_virt_devs[index] = virt_dev;
 	mutex_unlock(&opp_table->genpd_virt_dev_lock);
 
 	return opp_table;
+
+err:
+	_opp_detach_genpd(opp_table);
+unlock:
+	mutex_unlock(&opp_table->genpd_virt_dev_lock);
+
+put_table:
+	dev_pm_opp_put_opp_table(opp_table);
+
+	return ERR_PTR(ret);
 }
+EXPORT_SYMBOL_GPL(dev_pm_opp_attach_genpd);
 
 /**
- * dev_pm_opp_put_genpd_virt_dev() - Releases resources blocked for genpd device.
- * @opp_table: OPP table returned by dev_pm_opp_set_genpd_virt_dev().
- * @virt_dev: virtual genpd device.
+ * dev_pm_opp_detach_genpd() - Detach genpd(s) from the device.
+ * @opp_table: OPP table returned by dev_pm_opp_attach_genpd().
  *
- * This releases the resource previously acquired with a call to
- * dev_pm_opp_set_genpd_virt_dev(). The consumer driver shall call this helper
- * if it doesn't want OPP core to update performance state of a power domain
- * anymore.
+ * This detaches the genpd(s), resets the virtual device pointers, and puts the
+ * OPP table.
  */
-void dev_pm_opp_put_genpd_virt_dev(struct opp_table *opp_table,
-				   struct device *virt_dev)
+void dev_pm_opp_detach_genpd(struct opp_table *opp_table)
 {
-	int i;
-
 	/*
 	 * Acquire genpd_virt_dev_lock to make sure virt_dev isn't getting
 	 * used in parallel.
 	 */
 	mutex_lock(&opp_table->genpd_virt_dev_lock);
-
-	for (i = 0; i < opp_table->required_opp_count; i++) {
-		if (opp_table->genpd_virt_devs[i] != virt_dev)
-			continue;
-
-		opp_table->genpd_virt_devs[i] = NULL;
-		dev_pm_opp_put_opp_table(opp_table);
-
-		/* Drop the vote */
-		dev_pm_genpd_set_performance_state(virt_dev, 0);
-		break;
-	}
-
+	_opp_detach_genpd(opp_table);
 	mutex_unlock(&opp_table->genpd_virt_dev_lock);
 
-	if (unlikely(i == opp_table->required_opp_count))
-		dev_err(virt_dev, "Failed to find required device entry\n");
+	dev_pm_opp_put_opp_table(opp_table);
 }
+EXPORT_SYMBOL_GPL(dev_pm_opp_detach_genpd);
 
 /**
  * dev_pm_opp_xlate_performance_state() - Find required OPP's pstate for src_table.
diff --git a/drivers/opp/of.c b/drivers/opp/of.c
index b7d81c408242..b313aca9894f 100644
--- a/drivers/opp/of.c
+++ b/drivers/opp/of.c
@@ -138,7 +138,6 @@ err:
 static void _opp_table_free_required_tables(struct opp_table *opp_table)
 {
 	struct opp_table **required_opp_tables = opp_table->required_opp_tables;
-	struct device **genpd_virt_devs = opp_table->genpd_virt_devs;
 	int i;
 
 	if (!required_opp_tables)
@@ -152,10 +151,8 @@ static void _opp_table_free_required_tables(struct opp_table *opp_table)
 	}
 
 	kfree(required_opp_tables);
-	kfree(genpd_virt_devs);
 
 	opp_table->required_opp_count = 0;
-	opp_table->genpd_virt_devs = NULL;
 	opp_table->required_opp_tables = NULL;
 }
 
@@ -168,9 +165,8 @@ static void _opp_table_alloc_required_tables(struct opp_table *opp_table,
 					     struct device_node *opp_np)
 {
 	struct opp_table **required_opp_tables;
-	struct device **genpd_virt_devs = NULL;
 	struct device_node *required_np, *np;
-	int count, count_pd, i;
+	int count, i;
 
 	/* Traversing the first OPP node is all we need */
 	np = of_get_next_available_child(opp_np, NULL);
@@ -183,33 +179,11 @@ static void _opp_table_alloc_required_tables(struct opp_table *opp_table,
 	if (!count)
 		goto put_np;
 
-	/*
-	 * Check the number of power-domains to know if we need to deal
-	 * with virtual devices. In some cases we have devices with multiple
-	 * power domains but with only one of them being scalable, hence
-	 * 'count' could be 1, but we still have to deal with multiple genpds
-	 * and virtual devices.
-	 */
-	count_pd = of_count_phandle_with_args(dev->of_node, "power-domains",
-					      "#power-domain-cells");
-	if (!count_pd)
-		goto put_np;
-
-	if (count_pd > 1) {
-		genpd_virt_devs = kcalloc(count, sizeof(*genpd_virt_devs),
-					GFP_KERNEL);
-		if (!genpd_virt_devs)
-			goto put_np;
-	}
-
 	required_opp_tables = kcalloc(count, sizeof(*required_opp_tables),
 				      GFP_KERNEL);
-	if (!required_opp_tables) {
-		kfree(genpd_virt_devs);
+	if (!required_opp_tables)
 		goto put_np;
-	}
 
-	opp_table->genpd_virt_devs = genpd_virt_devs;
 	opp_table->required_opp_tables = required_opp_tables;
 	opp_table->required_opp_count = count;
 
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index 1897847ceb0c..45049f558860 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -685,12 +685,21 @@ static pci_power_t acpi_pci_get_power_state(struct pci_dev *dev)
 	if (!adev || !acpi_device_power_manageable(adev))
 		return PCI_UNKNOWN;
 
-	if (acpi_device_get_power(adev, &state) || state == ACPI_STATE_UNKNOWN)
+	state = adev->power.state;
+	if (state == ACPI_STATE_UNKNOWN)
 		return PCI_UNKNOWN;
 
 	return state_conv[state];
 }
 
+static void acpi_pci_refresh_power_state(struct pci_dev *dev)
+{
+	struct acpi_device *adev = ACPI_COMPANION(&dev->dev);
+
+	if (adev && acpi_device_power_manageable(adev))
+		acpi_device_update_power(adev, NULL);
+}
+
 static int acpi_pci_propagate_wakeup(struct pci_bus *bus, bool enable)
 {
 	while (bus->parent) {
@@ -748,6 +757,7 @@ static const struct pci_platform_pm_ops acpi_pci_platform_pm = {
 	.is_manageable = acpi_pci_power_manageable,
 	.set_state = acpi_pci_set_power_state,
 	.get_state = acpi_pci_get_power_state,
+	.refresh_state = acpi_pci_refresh_power_state,
 	.choose_state = acpi_pci_choose_state,
 	.set_wakeup = acpi_pci_wakeup,
 	.need_resume = acpi_pci_need_resume,
@@ -901,6 +911,7 @@ static void pci_acpi_setup(struct device *dev)
 		device_wakeup_enable(dev);
 
 	acpi_pci_wakeup(pci_dev, false);
+	acpi_device_power_add_dependent(adev, dev);
 }
 
 static void pci_acpi_cleanup(struct device *dev)
@@ -913,6 +924,7 @@ static void pci_acpi_cleanup(struct device *dev)
 
 	pci_acpi_remove_pm_notifier(adev);
 	if (adev->wakeup.flags.valid) {
+		acpi_device_power_remove_dependent(adev, dev);
 		if (pci_dev->bridge_d3)
 			device_wakeup_disable(dev);
 
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index ca3793002e2f..36dbe960306b 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -678,6 +678,7 @@ static bool pci_has_legacy_pm_support(struct pci_dev *pci_dev)
 static int pci_pm_prepare(struct device *dev)
 {
 	struct device_driver *drv = dev->driver;
+	struct pci_dev *pci_dev = to_pci_dev(dev);
 
 	if (drv && drv->pm && drv->pm->prepare) {
 		int error = drv->pm->prepare(dev);
@@ -687,7 +688,15 @@ static int pci_pm_prepare(struct device *dev)
 		if (!error && dev_pm_test_driver_flags(dev, DPM_FLAG_SMART_PREPARE))
 			return 0;
 	}
-	return pci_dev_keep_suspended(to_pci_dev(dev));
+	if (pci_dev_need_resume(pci_dev))
+		return 0;
+
+	/*
+	 * The PME setting needs to be adjusted here in case the direct-complete
+	 * optimization is used with respect to this device.
+	 */
+	pci_dev_adjust_pme(pci_dev);
+	return 1;
 }
 
 static void pci_pm_complete(struct device *dev)
@@ -701,7 +710,14 @@ static void pci_pm_complete(struct device *dev)
 	if (pm_runtime_suspended(dev) && pm_resume_via_firmware()) {
 		pci_power_t pre_sleep_state = pci_dev->current_state;
 
-		pci_update_current_state(pci_dev, pci_dev->current_state);
+		pci_refresh_power_state(pci_dev);
+		/*
+		 * On platforms with ACPI this check may also trigger for
+		 * devices sharing power resources if one of those power
+		 * resources has been activated as a result of a change of the
+		 * power state of another device sharing it.  However, in that
+		 * case it is also better to resume the device, in general.
+		 */
 		if (pci_dev->current_state < pre_sleep_state)
 			pm_request_resume(dev);
 	}
@@ -757,9 +773,11 @@ static int pci_pm_suspend(struct device *dev)
 	 * better to resume the device from runtime suspend here.
 	 */
 	if (!dev_pm_test_driver_flags(dev, DPM_FLAG_SMART_SUSPEND) ||
-	    !pci_dev_keep_suspended(pci_dev)) {
+	    pci_dev_need_resume(pci_dev)) {
 		pm_runtime_resume(dev);
 		pci_dev->state_saved = false;
+	} else {
+		pci_dev_adjust_pme(pci_dev);
 	}
 
 	if (pm->suspend) {
@@ -994,15 +1012,15 @@ static int pci_pm_freeze(struct device *dev)
 	}
 
 	/*
-	 * This used to be done in pci_pm_prepare() for all devices and some
-	 * drivers may depend on it, so do it here.  Ideally, runtime-suspended
-	 * devices should not be touched during freeze/thaw transitions,
-	 * however.
+	 * Resume all runtime-suspended devices before creating a snapshot
+	 * image of system memory, because the restore kernel generally cannot
+	 * be expected to always handle them consistently and they need to be
+	 * put into the runtime-active metastate during system resume anyway,
+	 * so it is better to ensure that the state saved in the image will be
+	 * always consistent with that.
 	 */
-	if (!dev_pm_smart_suspend_and_suspended(dev)) {
-		pm_runtime_resume(dev);
-		pci_dev->state_saved = false;
-	}
+	pm_runtime_resume(dev);
+	pci_dev->state_saved = false;
 
 	if (pm->freeze) {
 		int error;
@@ -1016,22 +1034,11 @@ static int pci_pm_freeze(struct device *dev)
 	return 0;
 }
 
-static int pci_pm_freeze_late(struct device *dev)
-{
-	if (dev_pm_smart_suspend_and_suspended(dev))
-		return 0;
-
-	return pm_generic_freeze_late(dev);
-}
-
 static int pci_pm_freeze_noirq(struct device *dev)
 {
 	struct pci_dev *pci_dev = to_pci_dev(dev);
 	struct device_driver *drv = dev->driver;
 
-	if (dev_pm_smart_suspend_and_suspended(dev))
-		return 0;
-
 	if (pci_has_legacy_pm_support(pci_dev))
 		return pci_legacy_suspend_late(dev, PMSG_FREEZE);
 
@@ -1061,16 +1068,6 @@ static int pci_pm_thaw_noirq(struct device *dev)
 	struct device_driver *drv = dev->driver;
 	int error = 0;
 
-	/*
-	 * If the device is in runtime suspend, the code below may not work
-	 * correctly with it, so skip that code and make the PM core skip all of
-	 * the subsequent "thaw" callbacks for the device.
-	 */
-	if (dev_pm_smart_suspend_and_suspended(dev)) {
-		dev_pm_skip_next_resume_phases(dev);
-		return 0;
-	}
-
 	if (pcibios_pm_ops.thaw_noirq) {
 		error = pcibios_pm_ops.thaw_noirq(dev);
 		if (error)
@@ -1130,10 +1127,13 @@ static int pci_pm_poweroff(struct device *dev)
 
 	/* The reason to do that is the same as in pci_pm_suspend(). */
 	if (!dev_pm_test_driver_flags(dev, DPM_FLAG_SMART_SUSPEND) ||
-	    !pci_dev_keep_suspended(pci_dev))
+	    pci_dev_need_resume(pci_dev)) {
 		pm_runtime_resume(dev);
+		pci_dev->state_saved = false;
+	} else {
+		pci_dev_adjust_pme(pci_dev);
+	}
 
-	pci_dev->state_saved = false;
 	if (pm->poweroff) {
 		int error;
 
@@ -1205,10 +1205,6 @@ static int pci_pm_restore_noirq(struct device *dev)
 	struct device_driver *drv = dev->driver;
 	int error = 0;
 
-	/* This is analogous to the pci_pm_resume_noirq() case. */
-	if (dev_pm_smart_suspend_and_suspended(dev))
-		pm_runtime_set_active(dev);
-
 	if (pcibios_pm_ops.restore_noirq) {
 		error = pcibios_pm_ops.restore_noirq(dev);
 		if (error)
@@ -1258,7 +1254,6 @@ static int pci_pm_restore(struct device *dev)
 #else /* !CONFIG_HIBERNATE_CALLBACKS */
 
 #define pci_pm_freeze		NULL
-#define pci_pm_freeze_late	NULL
 #define pci_pm_freeze_noirq	NULL
 #define pci_pm_thaw		NULL
 #define pci_pm_thaw_noirq	NULL
@@ -1384,7 +1379,6 @@ static const struct dev_pm_ops pci_dev_pm_ops = {
 	.suspend_late = pci_pm_suspend_late,
 	.resume = pci_pm_resume,
 	.freeze = pci_pm_freeze,
-	.freeze_late = pci_pm_freeze_late,
 	.thaw = pci_pm_thaw,
 	.poweroff = pci_pm_poweroff,
 	.poweroff_late = pci_pm_poweroff_late,
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 8abc843b1615..b1f563916036 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -777,6 +777,12 @@ static inline pci_power_t platform_pci_get_power_state(struct pci_dev *dev)
 	return pci_platform_pm ? pci_platform_pm->get_state(dev) : PCI_UNKNOWN;
 }
 
+static inline void platform_pci_refresh_power_state(struct pci_dev *dev)
+{
+	if (pci_platform_pm && pci_platform_pm->refresh_state)
+		pci_platform_pm->refresh_state(dev);
+}
+
 static inline pci_power_t platform_pci_choose_state(struct pci_dev *dev)
 {
 	return pci_platform_pm ?
@@ -938,6 +944,21 @@ void pci_update_current_state(struct pci_dev *dev, pci_power_t state)
 }
 
 /**
+ * pci_refresh_power_state - Refresh the given device's power state data
+ * @dev: Target PCI device.
+ *
+ * Ask the platform to refresh the devices power state information and invoke
+ * pci_update_current_state() to update its current PCI power state.
+ */
+void pci_refresh_power_state(struct pci_dev *dev)
+{
+	if (platform_pci_power_manageable(dev))
+		platform_pci_refresh_power_state(dev);
+
+	pci_update_current_state(dev, dev->current_state);
+}
+
+/**
  * pci_power_up - Put the given device into D0 forcibly
  * @dev: PCI device to power up
  */
@@ -1004,15 +1025,10 @@ static void __pci_start_power_transition(struct pci_dev *dev, pci_power_t state)
 	if (state == PCI_D0) {
 		pci_platform_power_transition(dev, PCI_D0);
 		/*
-		 * Mandatory power management transition delays, see
-		 * PCI Express Base Specification Revision 2.0 Section
-		 * 6.6.1: Conventional Reset.  Do not delay for
-		 * devices powered on/off by corresponding bridge,
-		 * because have already delayed for the bridge.
+		 * Mandatory power management transition delays are
+		 * handled in the PCIe portdrv resume hooks.
 		 */
 		if (dev->runtime_d3cold) {
-			if (dev->d3cold_delay && !dev->imm_ready)
-				msleep(dev->d3cold_delay);
 			/*
 			 * When powering on a bridge from D3cold, the
 			 * whole hierarchy may be powered on into
@@ -2065,6 +2081,13 @@ static void pci_pme_list_scan(struct work_struct *work)
 			 */
 			if (bridge && bridge->current_state != PCI_D0)
 				continue;
+			/*
+			 * If the device is in D3cold it should not be
+			 * polled either.
+			 */
+			if (pme_dev->dev->current_state == PCI_D3cold)
+				continue;
+
 			pci_pme_wakeup(pme_dev->dev, NULL);
 		} else {
 			list_del(&pme_dev->list);
@@ -2459,45 +2482,56 @@ bool pci_dev_run_wake(struct pci_dev *dev)
 EXPORT_SYMBOL_GPL(pci_dev_run_wake);
 
 /**
- * pci_dev_keep_suspended - Check if the device can stay in the suspended state.
+ * pci_dev_need_resume - Check if it is necessary to resume the device.
  * @pci_dev: Device to check.
  *
- * Return 'true' if the device is runtime-suspended, it doesn't have to be
+ * Return 'true' if the device is not runtime-suspended or it has to be
  * reconfigured due to wakeup settings difference between system and runtime
- * suspend and the current power state of it is suitable for the upcoming
- * (system) transition.
- *
- * If the device is not configured for system wakeup, disable PME for it before
- * returning 'true' to prevent it from waking up the system unnecessarily.
+ * suspend, or the current power state of it is not suitable for the upcoming
+ * (system-wide) transition.
  */
-bool pci_dev_keep_suspended(struct pci_dev *pci_dev)
+bool pci_dev_need_resume(struct pci_dev *pci_dev)
 {
 	struct device *dev = &pci_dev->dev;
-	bool wakeup = device_may_wakeup(dev);
+	pci_power_t target_state;
 
-	if (!pm_runtime_suspended(dev)
-	    || pci_target_state(pci_dev, wakeup) != pci_dev->current_state
-	    || platform_pci_need_resume(pci_dev))
-		return false;
+	if (!pm_runtime_suspended(dev) || platform_pci_need_resume(pci_dev))
+		return true;
+
+	target_state = pci_target_state(pci_dev, device_may_wakeup(dev));
 
 	/*
-	 * At this point the device is good to go unless it's been configured
-	 * to generate PME at the runtime suspend time, but it is not supposed
-	 * to wake up the system.  In that case, simply disable PME for it
-	 * (it will have to be re-enabled on exit from system resume).
-	 *
-	 * If the device's power state is D3cold and the platform check above
-	 * hasn't triggered, the device's configuration is suitable and we don't
-	 * need to manipulate it at all.
+	 * If the earlier platform check has not triggered, D3cold is just power
+	 * removal on top of D3hot, so no need to resume the device in that
+	 * case.
 	 */
+	return target_state != pci_dev->current_state &&
+		target_state != PCI_D3cold &&
+		pci_dev->current_state != PCI_D3hot;
+}
+
+/**
+ * pci_dev_adjust_pme - Adjust PME setting for a suspended device.
+ * @pci_dev: Device to check.
+ *
+ * If the device is suspended and it is not configured for system wakeup,
+ * disable PME for it to prevent it from waking up the system unnecessarily.
+ *
+ * Note that if the device's power state is D3cold and the platform check in
+ * pci_dev_need_resume() has not triggered, the device's configuration need not
+ * be changed.
+ */
+void pci_dev_adjust_pme(struct pci_dev *pci_dev)
+{
+	struct device *dev = &pci_dev->dev;
+
 	spin_lock_irq(&dev->power.lock);
 
-	if (pm_runtime_suspended(dev) && pci_dev->current_state < PCI_D3cold &&
-	    !wakeup)
+	if (pm_runtime_suspended(dev) && !device_may_wakeup(dev) &&
+	    pci_dev->current_state < PCI_D3cold)
 		__pci_pme_active(pci_dev, false);
 
 	spin_unlock_irq(&dev->power.lock);
-	return true;
 }
 
 /**
@@ -4568,14 +4602,16 @@ static int pci_pm_reset(struct pci_dev *dev, int probe)
 
 	return pci_dev_wait(dev, "PM D3->D0", PCIE_RESET_READY_POLL_MS);
 }
+
 /**
- * pcie_wait_for_link - Wait until link is active or inactive
+ * pcie_wait_for_link_delay - Wait until link is active or inactive
  * @pdev: Bridge device
  * @active: waiting for active or inactive?
+ * @delay: Delay to wait after link has become active (in ms)
  *
  * Use this to wait till link becomes active or inactive.
  */
-bool pcie_wait_for_link(struct pci_dev *pdev, bool active)
+bool pcie_wait_for_link_delay(struct pci_dev *pdev, bool active, int delay)
 {
 	int timeout = 1000;
 	bool ret;
@@ -4612,13 +4648,25 @@ bool pcie_wait_for_link(struct pci_dev *pdev, bool active)
 		timeout -= 10;
 	}
 	if (active && ret)
-		msleep(100);
+		msleep(delay);
 	else if (ret != active)
 		pci_info(pdev, "Data Link Layer Link Active not %s in 1000 msec\n",
 			active ? "set" : "cleared");
 	return ret == active;
 }
 
+/**
+ * pcie_wait_for_link - Wait until link is active or inactive
+ * @pdev: Bridge device
+ * @active: waiting for active or inactive?
+ *
+ * Use this to wait till link becomes active or inactive.
+ */
+bool pcie_wait_for_link(struct pci_dev *pdev, bool active)
+{
+	return pcie_wait_for_link_delay(pdev, active, 100);
+}
+
 void pci_reset_secondary_bus(struct pci_dev *dev)
 {
 	u16 ctrl;
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 9cb99380c61e..5db6f985f16d 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -51,6 +51,8 @@ int pci_bus_error_reset(struct pci_dev *dev);
  *
  * @get_state: queries the platform firmware for a device's current power state
  *
+ * @refresh_state: asks the platform to refresh the device's power state data
+ *
  * @choose_state: returns PCI power state of given device preferred by the
  *		  platform; to be used during system-wide transitions from a
  *		  sleeping state to the working state and vice versa
@@ -69,6 +71,7 @@ struct pci_platform_pm_ops {
 	bool (*is_manageable)(struct pci_dev *dev);
 	int (*set_state)(struct pci_dev *dev, pci_power_t state);
 	pci_power_t (*get_state)(struct pci_dev *dev);
+	void (*refresh_state)(struct pci_dev *dev);
 	pci_power_t (*choose_state)(struct pci_dev *dev);
 	int (*set_wakeup)(struct pci_dev *dev, bool enable);
 	bool (*need_resume)(struct pci_dev *dev);
@@ -76,13 +79,15 @@ struct pci_platform_pm_ops {
 
 int pci_set_platform_pm(const struct pci_platform_pm_ops *ops);
 void pci_update_current_state(struct pci_dev *dev, pci_power_t state);
+void pci_refresh_power_state(struct pci_dev *dev);
 void pci_power_up(struct pci_dev *dev);
 void pci_disable_enabled_device(struct pci_dev *dev);
 int pci_finish_runtime_suspend(struct pci_dev *dev);
 void pcie_clear_root_pme_status(struct pci_dev *dev);
 int __pci_pme_wakeup(struct pci_dev *dev, void *ign);
 void pci_pme_restore(struct pci_dev *dev);
-bool pci_dev_keep_suspended(struct pci_dev *dev);
+bool pci_dev_need_resume(struct pci_dev *dev);
+void pci_dev_adjust_pme(struct pci_dev *dev);
 void pci_dev_complete_resume(struct pci_dev *pci_dev);
 void pci_config_pm_runtime_get(struct pci_dev *dev);
 void pci_config_pm_runtime_put(struct pci_dev *dev);
@@ -493,6 +498,7 @@ static inline int pci_dev_specific_disable_acs_redir(struct pci_dev *dev)
 void pcie_do_recovery(struct pci_dev *dev, enum pci_channel_state state,
 		      u32 service);
 
+bool pcie_wait_for_link_delay(struct pci_dev *pdev, bool active, int delay);
 bool pcie_wait_for_link(struct pci_dev *pdev, bool active);
 #ifdef CONFIG_PCIEASPM
 void pcie_aspm_init_link_state(struct pci_dev *pdev);
diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
index 1b330129089f..308c3e0c4a34 100644
--- a/drivers/pci/pcie/portdrv_core.c
+++ b/drivers/pci/pcie/portdrv_core.c
@@ -9,6 +9,7 @@
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/kernel.h>
+#include <linux/delay.h>
 #include <linux/errno.h>
 #include <linux/pm.h>
 #include <linux/pm_runtime.h>
@@ -378,6 +379,67 @@ static int pm_iter(struct device *dev, void *data)
 	return 0;
 }
 
+static int get_downstream_delay(struct pci_bus *bus)
+{
+	struct pci_dev *pdev;
+	int min_delay = 100;
+	int max_delay = 0;
+
+	list_for_each_entry(pdev, &bus->devices, bus_list) {
+		if (!pdev->imm_ready)
+			min_delay = 0;
+		else if (pdev->d3cold_delay < min_delay)
+			min_delay = pdev->d3cold_delay;
+		if (pdev->d3cold_delay > max_delay)
+			max_delay = pdev->d3cold_delay;
+	}
+
+	return max(min_delay, max_delay);
+}
+
+/*
+ * wait_for_downstream_link - Wait for downstream link to establish
+ * @pdev: PCIe port whose downstream link is waited
+ *
+ * Handle delays according to PCIe 4.0 section 6.6.1 before configuration
+ * access to the downstream component is permitted.
+ *
+ * This blocks PCI core resume of the hierarchy below this port until the
+ * link is trained. Should be called before resuming port services to
+ * prevent pciehp from starting to tear-down the hierarchy too soon.
+ */
+static void wait_for_downstream_link(struct pci_dev *pdev)
+{
+	int delay;
+
+	if (pci_pcie_type(pdev) != PCI_EXP_TYPE_ROOT_PORT &&
+	    pci_pcie_type(pdev) != PCI_EXP_TYPE_DOWNSTREAM)
+		return;
+
+	if (pci_dev_is_disconnected(pdev))
+		return;
+
+	if (!pdev->subordinate || list_empty(&pdev->subordinate->devices) ||
+	    !pdev->bridge_d3)
+		return;
+
+	delay = get_downstream_delay(pdev->subordinate);
+	if (!delay)
+		return;
+
+	dev_dbg(&pdev->dev, "waiting downstream link for %d ms\n", delay);
+
+	/*
+	 * If downstream port does not support speeds greater than 5 GT/s
+	 * need to wait 100ms. For higher speeds (gen3) we need to wait
+	 * first for the data link layer to become active.
+	 */
+	if (pcie_get_speed_cap(pdev) <= PCIE_SPEED_5_0GT)
+		msleep(delay);
+	else
+		pcie_wait_for_link_delay(pdev, true, delay);
+}
+
 /**
  * pcie_port_device_suspend - suspend port services associated with a PCIe port
  * @dev: PCI Express port to handle
@@ -391,6 +453,8 @@ int pcie_port_device_suspend(struct device *dev)
 int pcie_port_device_resume_noirq(struct device *dev)
 {
 	size_t off = offsetof(struct pcie_port_service_driver, resume_noirq);
+
+	wait_for_downstream_link(to_pci_dev(dev));
 	return device_for_each_child(dev, &off, pm_iter);
 }
 
@@ -421,6 +485,8 @@ int pcie_port_device_runtime_suspend(struct device *dev)
 int pcie_port_device_runtime_resume(struct device *dev)
 {
 	size_t off = offsetof(struct pcie_port_service_driver, runtime_resume);
+
+	wait_for_downstream_link(to_pci_dev(dev));
 	return device_for_each_child(dev, &off, pm_iter);
 }
 #endif /* PM */
diff --git a/drivers/power/avs/smartreflex.c b/drivers/power/avs/smartreflex.c
index c96c01e09740..4684e7df833a 100644
--- a/drivers/power/avs/smartreflex.c
+++ b/drivers/power/avs/smartreflex.c
@@ -899,38 +899,19 @@ static int omap_sr_probe(struct platform_device *pdev)
 	}
 
 	dev_info(&pdev->dev, "%s: SmartReflex driver initialized\n", __func__);
-	if (!sr_dbg_dir) {
+	if (!sr_dbg_dir)
 		sr_dbg_dir = debugfs_create_dir("smartreflex", NULL);
-		if (IS_ERR_OR_NULL(sr_dbg_dir)) {
-			ret = PTR_ERR(sr_dbg_dir);
-			pr_err("%s:sr debugfs dir creation failed(%d)\n",
-			       __func__, ret);
-			goto err_list_del;
-		}
-	}
 
 	sr_info->dbg_dir = debugfs_create_dir(sr_info->name, sr_dbg_dir);
-	if (IS_ERR_OR_NULL(sr_info->dbg_dir)) {
-		dev_err(&pdev->dev, "%s: Unable to create debugfs directory\n",
-			__func__);
-		ret = PTR_ERR(sr_info->dbg_dir);
-		goto err_debugfs;
-	}
 
-	(void) debugfs_create_file("autocomp", S_IRUGO | S_IWUSR,
-			sr_info->dbg_dir, (void *)sr_info, &pm_sr_fops);
-	(void) debugfs_create_x32("errweight", S_IRUGO, sr_info->dbg_dir,
-			&sr_info->err_weight);
-	(void) debugfs_create_x32("errmaxlimit", S_IRUGO, sr_info->dbg_dir,
-			&sr_info->err_maxlimit);
+	debugfs_create_file("autocomp", S_IRUGO | S_IWUSR, sr_info->dbg_dir,
+			    (void *)sr_info, &pm_sr_fops);
+	debugfs_create_x32("errweight", S_IRUGO, sr_info->dbg_dir,
+			   &sr_info->err_weight);
+	debugfs_create_x32("errmaxlimit", S_IRUGO, sr_info->dbg_dir,
+			   &sr_info->err_maxlimit);
 
 	nvalue_dir = debugfs_create_dir("nvalue", sr_info->dbg_dir);
-	if (IS_ERR_OR_NULL(nvalue_dir)) {
-		dev_err(&pdev->dev, "%s: Unable to create debugfs directory for n-values\n",
-			__func__);
-		ret = PTR_ERR(nvalue_dir);
-		goto err_debugfs;
-	}
 
 	if (sr_info->nvalue_count == 0 || !sr_info->nvalue_table) {
 		dev_warn(&pdev->dev, "%s: %s: No Voltage table for the corresponding vdd. Cannot create debugfs entries for n-values\n",
@@ -945,12 +926,12 @@ static int omap_sr_probe(struct platform_device *pdev)
 
 		snprintf(name, sizeof(name), "volt_%lu",
 				sr_info->nvalue_table[i].volt_nominal);
-		(void) debugfs_create_x32(name, S_IRUGO | S_IWUSR, nvalue_dir,
-				&(sr_info->nvalue_table[i].nvalue));
+		debugfs_create_x32(name, S_IRUGO | S_IWUSR, nvalue_dir,
+				   &(sr_info->nvalue_table[i].nvalue));
 		snprintf(name, sizeof(name), "errminlimit_%lu",
 			 sr_info->nvalue_table[i].volt_nominal);
-		(void) debugfs_create_x32(name, S_IRUGO | S_IWUSR, nvalue_dir,
-				&(sr_info->nvalue_table[i].errminlimit));
+		debugfs_create_x32(name, S_IRUGO | S_IWUSR, nvalue_dir,
+				   &(sr_info->nvalue_table[i].errminlimit));
 
 	}
 
diff --git a/drivers/soc/imx/soc-imx8.c b/drivers/soc/imx/soc-imx8.c
index fc6429f9170a..b1bd8e2543ac 100644
--- a/drivers/soc/imx/soc-imx8.c
+++ b/drivers/soc/imx/soc-imx8.c
@@ -103,6 +103,9 @@ static int __init imx8_soc_init(void)
 	if (IS_ERR(soc_dev))
 		goto free_rev;
 
+	if (IS_ENABLED(CONFIG_ARM_IMX_CPUFREQ_DT))
+		platform_device_register_simple("imx-cpufreq-dt", -1, NULL, 0);
+
 	return 0;
 
 free_rev:
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index 31b6c87d6240..175f7b40c585 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -506,13 +506,16 @@ int acpi_bus_get_status(struct acpi_device *device);
 
 int acpi_bus_set_power(acpi_handle handle, int state);
 const char *acpi_power_state_string(int state);
-int acpi_device_get_power(struct acpi_device *device, int *state);
 int acpi_device_set_power(struct acpi_device *device, int state);
 int acpi_bus_init_power(struct acpi_device *device);
 int acpi_device_fix_up_power(struct acpi_device *device);
 int acpi_bus_update_power(acpi_handle handle, int *state_p);
 int acpi_device_update_power(struct acpi_device *device, int *state_p);
 bool acpi_bus_power_manageable(acpi_handle handle);
+int acpi_device_power_add_dependent(struct acpi_device *adev,
+				    struct device *dev);
+void acpi_device_power_remove_dependent(struct acpi_device *adev,
+					struct device *dev);
 
 #ifdef CONFIG_PM
 bool acpi_bus_can_wakeup(acpi_handle handle);
@@ -651,6 +654,12 @@ static inline int acpi_pm_set_bridge_wakeup(struct device *dev, bool enable)
 }
 #endif
 
+#ifdef CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT
+bool acpi_sleep_state_supported(u8 sleep_state);
+#else
+static inline bool acpi_sleep_state_supported(u8 sleep_state) { return false; }
+#endif
+
 #ifdef CONFIG_ACPI_SLEEP
 u32 acpi_target_system_state(void);
 #else
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 469be6844703..451e7b544342 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -920,31 +920,21 @@ static inline int acpi_dev_pm_attach(struct device *dev, bool power_on)
 #endif
 
 #if defined(CONFIG_ACPI) && defined(CONFIG_PM_SLEEP)
-int acpi_dev_suspend_late(struct device *dev);
 int acpi_subsys_prepare(struct device *dev);
 void acpi_subsys_complete(struct device *dev);
 int acpi_subsys_suspend_late(struct device *dev);
 int acpi_subsys_suspend_noirq(struct device *dev);
-int acpi_subsys_resume_noirq(struct device *dev);
-int acpi_subsys_resume_early(struct device *dev);
 int acpi_subsys_suspend(struct device *dev);
 int acpi_subsys_freeze(struct device *dev);
-int acpi_subsys_freeze_late(struct device *dev);
-int acpi_subsys_freeze_noirq(struct device *dev);
-int acpi_subsys_thaw_noirq(struct device *dev);
+int acpi_subsys_poweroff(struct device *dev);
 #else
-static inline int acpi_dev_resume_early(struct device *dev) { return 0; }
 static inline int acpi_subsys_prepare(struct device *dev) { return 0; }
 static inline void acpi_subsys_complete(struct device *dev) {}
 static inline int acpi_subsys_suspend_late(struct device *dev) { return 0; }
 static inline int acpi_subsys_suspend_noirq(struct device *dev) { return 0; }
-static inline int acpi_subsys_resume_noirq(struct device *dev) { return 0; }
-static inline int acpi_subsys_resume_early(struct device *dev) { return 0; }
 static inline int acpi_subsys_suspend(struct device *dev) { return 0; }
 static inline int acpi_subsys_freeze(struct device *dev) { return 0; }
-static inline int acpi_subsys_freeze_late(struct device *dev) { return 0; }
-static inline int acpi_subsys_freeze_noirq(struct device *dev) { return 0; }
-static inline int acpi_subsys_thaw_noirq(struct device *dev) { return 0; }
+static inline int acpi_subsys_poweroff(struct device *dev) { return 0; }
 #endif
 
 #ifdef CONFIG_ACPI
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index 32a1733014f5..46b167fba155 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -406,6 +406,12 @@ int cpufreq_unregister_driver(struct cpufreq_driver *driver_data);
 const char *cpufreq_get_current_driver(void);
 void *cpufreq_get_driver_data(void);
 
+static inline int cpufreq_thermal_control_enabled(struct cpufreq_driver *drv)
+{
+	return IS_ENABLED(CONFIG_CPU_THERMAL) &&
+		(drv->flags & CPUFREQ_IS_COOLING_DEV);
+}
+
 static inline void cpufreq_verify_within_limits(struct cpufreq_policy *policy,
 		unsigned int min, unsigned int max)
 {
diff --git a/include/linux/pm.h b/include/linux/pm.h
index 345d74a727e3..283fb3defe56 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -760,7 +760,6 @@ extern int pm_generic_poweroff_late(struct device *dev);
 extern int pm_generic_poweroff(struct device *dev);
 extern void pm_generic_complete(struct device *dev);
 
-extern void dev_pm_skip_next_resume_phases(struct device *dev);
 extern bool dev_pm_may_skip_resume(struct device *dev);
 extern bool dev_pm_smart_suspend_and_suspended(struct device *dev);
 
diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h
index 5f3a1ee9c4c2..af5021f27cb7 100644
--- a/include/linux/pm_opp.h
+++ b/include/linux/pm_opp.h
@@ -128,8 +128,8 @@ struct opp_table *dev_pm_opp_set_clkname(struct device *dev, const char * name);
 void dev_pm_opp_put_clkname(struct opp_table *opp_table);
 struct opp_table *dev_pm_opp_register_set_opp_helper(struct device *dev, int (*set_opp)(struct dev_pm_set_opp_data *data));
 void dev_pm_opp_unregister_set_opp_helper(struct opp_table *opp_table);
-struct opp_table *dev_pm_opp_set_genpd_virt_dev(struct device *dev, struct device *virt_dev, int index);
-void dev_pm_opp_put_genpd_virt_dev(struct opp_table *opp_table, struct device *virt_dev);
+struct opp_table *dev_pm_opp_attach_genpd(struct device *dev, const char **names);
+void dev_pm_opp_detach_genpd(struct opp_table *opp_table);
 int dev_pm_opp_xlate_performance_state(struct opp_table *src_table, struct opp_table *dst_table, unsigned int pstate);
 int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq);
 int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, const struct cpumask *cpumask);
@@ -292,12 +292,12 @@ static inline struct opp_table *dev_pm_opp_set_clkname(struct device *dev, const
 
 static inline void dev_pm_opp_put_clkname(struct opp_table *opp_table) {}
 
-static inline struct opp_table *dev_pm_opp_set_genpd_virt_dev(struct device *dev, struct device *virt_dev, int index)
+static inline struct opp_table *dev_pm_opp_attach_genpd(struct device *dev, const char **names)
 {
 	return ERR_PTR(-ENOTSUPP);
 }
 
-static inline void dev_pm_opp_put_genpd_virt_dev(struct opp_table *opp_table, struct device *virt_dev) {}
+static inline void dev_pm_opp_detach_genpd(struct opp_table *opp_table) {}
 
 static inline int dev_pm_opp_xlate_performance_state(struct opp_table *src_table, struct opp_table *dst_table, unsigned int pstate)
 {
diff --git a/include/linux/pm_wakeup.h b/include/linux/pm_wakeup.h
index ce57771fab9b..91027602d137 100644
--- a/include/linux/pm_wakeup.h
+++ b/include/linux/pm_wakeup.h
@@ -36,7 +36,7 @@ struct wake_irq;
  * @expire_count: Number of times the wakeup source's timeout has expired.
  * @wakeup_count: Number of times the wakeup source might abort suspend.
  * @active: Status of the wakeup source.
- * @has_timeout: The wakeup source has been activated with a timeout.
+ * @autosleep_enabled: Autosleep is active, so update @prevent_sleep_time.
  */
 struct wakeup_source {
 	const char 		*name;
diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index f0d262ad7b78..9c0ad1a3a727 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -304,7 +304,7 @@ static inline bool idle_should_enter_s2idle(void)
 	return unlikely(s2idle_state == S2IDLE_STATE_ENTER);
 }
 
-extern bool pm_suspend_via_s2idle(void);
+extern bool pm_suspend_default_s2idle(void);
 extern void __init pm_states_init(void);
 extern void s2idle_set_ops(const struct platform_s2idle_ops *ops);
 extern void s2idle_wake(void);
@@ -336,7 +336,7 @@ static inline void pm_set_suspend_via_firmware(void) {}
 static inline void pm_set_resume_via_firmware(void) {}
 static inline bool pm_suspend_via_firmware(void) { return false; }
 static inline bool pm_resume_via_firmware(void) { return false; }
-static inline bool pm_suspend_via_s2idle(void) { return false; }
+static inline bool pm_suspend_default_s2idle(void) { return false; }
 
 static inline void suspend_set_ops(const struct platform_suspend_ops *ops) {}
 static inline int pm_suspend(suspend_state_t state) { return -ENOSYS; }
@@ -448,6 +448,7 @@ extern bool system_entering_hibernation(void);
 extern bool hibernation_available(void);
 asmlinkage int swsusp_save(void);
 extern struct pbe *restore_pblist;
+int pfn_is_nosave(unsigned long pfn);
 #else /* CONFIG_HIBERNATION */
 static inline void register_nosave_region(unsigned long b, unsigned long e) {}
 static inline void register_nosave_region_late(unsigned long b, unsigned long e) {}
diff --git a/kernel/power/power.h b/kernel/power/power.h
index 9e58bdc8a562..44bee462ff57 100644
--- a/kernel/power/power.h
+++ b/kernel/power/power.h
@@ -75,8 +75,6 @@ static inline void hibernate_reserved_size_init(void) {}
 static inline void hibernate_image_size_init(void) {}
 #endif /* !CONFIG_HIBERNATION */
 
-extern int pfn_is_nosave(unsigned long);
-
 #define power_attr(_name) \
 static struct kobj_attribute _name##_attr = {	\
 	.attr	= {				\
diff --git a/kernel/power/suspend.c b/kernel/power/suspend.c
index 096211299c07..c874a7026e24 100644
--- a/kernel/power/suspend.c
+++ b/kernel/power/suspend.c
@@ -62,16 +62,16 @@ enum s2idle_states __read_mostly s2idle_state;
 static DEFINE_RAW_SPINLOCK(s2idle_lock);
 
 /**
- * pm_suspend_via_s2idle - Check if suspend-to-idle is the default suspend.
+ * pm_suspend_default_s2idle - Check if suspend-to-idle is the default suspend.
  *
  * Return 'true' if suspend-to-idle has been selected as the default system
  * suspend method.
  */
-bool pm_suspend_via_s2idle(void)
+bool pm_suspend_default_s2idle(void)
 {
 	return mem_sleep_current == PM_SUSPEND_TO_IDLE;
 }
-EXPORT_SYMBOL_GPL(pm_suspend_via_s2idle);
+EXPORT_SYMBOL_GPL(pm_suspend_default_s2idle);
 
 void s2idle_set_ops(const struct platform_s2idle_ops *ops)
 {
diff --git a/kernel/power/swap.c b/kernel/power/swap.c
index e1912ad13bdc..ca0fcb5ced71 100644
--- a/kernel/power/swap.c
+++ b/kernel/power/swap.c
@@ -974,12 +974,11 @@ static int get_swap_reader(struct swap_map_handle *handle,
 	last = handle->maps = NULL;
 	offset = swsusp_header->image;
 	while (offset) {
-		tmp = kmalloc(sizeof(*handle->maps), GFP_KERNEL);
+		tmp = kzalloc(sizeof(*handle->maps), GFP_KERNEL);
 		if (!tmp) {
 			release_swap_reader(handle);
 			return -ENOMEM;
 		}
-		memset(tmp, 0, sizeof(*tmp));
 		if (!handle->maps)
 			handle->maps = tmp;
 		if (last)
diff --git a/tools/power/cpupower/man/cpupower-monitor.1 b/tools/power/cpupower/man/cpupower-monitor.1
index 914cbb9d9cd0..70a56476f4b0 100644
--- a/tools/power/cpupower/man/cpupower-monitor.1
+++ b/tools/power/cpupower/man/cpupower-monitor.1
@@ -61,7 +61,7 @@ Only display specific monitors. Use the monitor string(s) provided by \-l option
 .PP
 \-i seconds
 .RS 4
-Measure intervall.
+Measure interval.
 .RE
 .PP
 \-c
diff --git a/tools/power/cpupower/po/cs.po b/tools/power/cpupower/po/cs.po
index cb22c45c5069..bfc7e1702ec9 100644
--- a/tools/power/cpupower/po/cs.po
+++ b/tools/power/cpupower/po/cs.po
@@ -98,7 +98,7 @@ msgstr ""
 
 #: utils/idle_monitor/cpupower-monitor.c:74
 #, c-format
-msgid "\t -i: time intervall to measure for in seconds (default 1)\n"
+msgid "\t -i: time interval to measure for in seconds (default 1)\n"
 msgstr ""
 
 #: utils/idle_monitor/cpupower-monitor.c:75
diff --git a/tools/power/cpupower/po/de.po b/tools/power/cpupower/po/de.po
index 840c17cc450a..70887bb8ba95 100644
--- a/tools/power/cpupower/po/de.po
+++ b/tools/power/cpupower/po/de.po
@@ -95,7 +95,7 @@ msgstr ""
 
 #: utils/idle_monitor/cpupower-monitor.c:74
 #, c-format
-msgid "\t -i: time intervall to measure for in seconds (default 1)\n"
+msgid "\t -i: time interval to measure for in seconds (default 1)\n"
 msgstr ""
 
 #: utils/idle_monitor/cpupower-monitor.c:75
diff --git a/tools/power/cpupower/po/fr.po b/tools/power/cpupower/po/fr.po
index b46ca2548f86..b6e505b34e4a 100644
--- a/tools/power/cpupower/po/fr.po
+++ b/tools/power/cpupower/po/fr.po
@@ -95,7 +95,7 @@ msgstr ""
 
 #: utils/idle_monitor/cpupower-monitor.c:74
 #, c-format
-msgid "\t -i: time intervall to measure for in seconds (default 1)\n"
+msgid "\t -i: time interval to measure for in seconds (default 1)\n"
 msgstr ""
 
 #: utils/idle_monitor/cpupower-monitor.c:75
diff --git a/tools/power/cpupower/po/it.po b/tools/power/cpupower/po/it.po
index f80c4ddb9bda..a1deeb52c9e0 100644
--- a/tools/power/cpupower/po/it.po
+++ b/tools/power/cpupower/po/it.po
@@ -95,7 +95,7 @@ msgstr ""
 
 #: utils/idle_monitor/cpupower-monitor.c:74
 #, c-format
-msgid "\t -i: time intervall to measure for in seconds (default 1)\n"
+msgid "\t -i: time interval to measure for in seconds (default 1)\n"
 msgstr ""
 
 #: utils/idle_monitor/cpupower-monitor.c:75
diff --git a/tools/power/cpupower/po/pt.po b/tools/power/cpupower/po/pt.po
index 990f5267ffe8..902186585bb9 100644
--- a/tools/power/cpupower/po/pt.po
+++ b/tools/power/cpupower/po/pt.po
@@ -93,7 +93,7 @@ msgstr ""
 
 #: utils/idle_monitor/cpupower-monitor.c:74
 #, c-format
-msgid "\t -i: time intervall to measure for in seconds (default 1)\n"
+msgid "\t -i: time interval to measure for in seconds (default 1)\n"
 msgstr ""
 
 #: utils/idle_monitor/cpupower-monitor.c:75
diff --git a/tools/power/cpupower/utils/cpufreq-set.c b/tools/power/cpupower/utils/cpufreq-set.c
index f49bc4aa2a08..6ed82fba5aaa 100644
--- a/tools/power/cpupower/utils/cpufreq-set.c
+++ b/tools/power/cpupower/utils/cpufreq-set.c
@@ -305,6 +305,8 @@ int cmd_freq_set(int argc, char **argv)
 				bitmask_setbit(cpus_chosen, cpus->cpu);
 				cpus = cpus->next;
 			}
+			/* Set the last cpu in related cpus list */
+			bitmask_setbit(cpus_chosen, cpus->cpu);
 			cpufreq_put_related_cpus(cpus);
 		}
 	}
diff --git a/tools/power/pm-graph/README b/tools/power/pm-graph/README
new file mode 100644
index 000000000000..58a5591e3951
--- /dev/null
+++ b/tools/power/pm-graph/README
@@ -0,0 +1,552 @@
+                     p m - g r a p h
+
+   pm-graph: suspend/resume/boot timing analysis tools
+    Version: 5.4
+     Author: Todd Brandt <todd.e.brandt@intel.com>
+  Home Page: https://01.org/pm-graph
+
+ Report bugs/issues at bugzilla.kernel.org Tools/pm-graph
+	- https://bugzilla.kernel.org/buglist.cgi?component=pm-graph&product=Tools
+
+ Full documentation available online & in man pages
+	- Getting Started:
+	  https://01.org/pm-graph/documentation/getting-started
+
+	- Config File Format:
+	  https://01.org/pm-graph/documentation/3-config-file-format
+
+	- upstream version in git:
+	  https://github.com/intel/pm-graph/
+
+ Table of Contents
+	- Overview
+	- Setup
+	- Usage
+		- Basic Usage
+		- Dev Mode Usage
+		- Proc Mode Usage
+	- Configuration Files
+		- Usage Examples
+		- Config File Options
+	- Custom Timeline Entries
+		- Adding/Editing Timeline Functions
+		- Adding/Editing Dev Timeline Source Functions
+		- Verifying your Custom Functions
+	- Testing on consumer linux Operating Systems
+		- Android
+
+------------------------------------------------------------------
+|                          OVERVIEW                              |
+------------------------------------------------------------------
+
+ This tool suite is designed to assist kernel and OS developers in optimizing
+ their linux stack's suspend/resume & boot time. Using a kernel image built
+ with a few extra options enabled, the tools will execute a suspend or boot,
+ and will capture dmesg and ftrace data. This data is transformed into a set of
+ timelines and a callgraph to give a quick and detailed view of which devices
+ and kernel processes are taking the most time in suspend/resume & boot.
+
+------------------------------------------------------------------
+|                            SETUP                               |
+------------------------------------------------------------------
+
+    These packages are required to execute the scripts
+       - python
+       - python-requests
+
+       Ubuntu:
+          sudo apt-get install python python-requests
+
+       Fedora:
+          sudo dnf install python python-requests
+
+    The tools can most easily be installed via git clone and make install
+
+    $> git clone http://github.com/intel/pm-graph.git
+    $> cd pm-graph
+    $> sudo make install
+    $> man sleepgraph ; man bootgraph
+
+    Setup involves some minor kernel configuration
+
+    The following kernel build options are required for all kernels:
+        CONFIG_DEVMEM=y
+        CONFIG_PM_DEBUG=y
+        CONFIG_PM_SLEEP_DEBUG=y
+        CONFIG_FTRACE=y
+        CONFIG_FUNCTION_TRACER=y
+        CONFIG_FUNCTION_GRAPH_TRACER=y
+        CONFIG_KPROBES=y
+        CONFIG_KPROBES_ON_FTRACE=y
+
+	In kernel 3.15.0, two patches were upstreamed which enable the
+        v3.0 behavior. These patches allow the tool to read all the
+        data from trace events instead of from dmesg. You can enable
+        this behavior on earlier kernels with these patches:
+
+        (kernel/pre-3.15/enable_trace_events_suspend_resume.patch)
+        (kernel/pre-3.15/enable_trace_events_device_pm_callback.patch)
+
+	If you're using a kernel older than 3.15.0, the following
+        additional kernel parameters are required:
+        (e.g. in file /etc/default/grub)
+        GRUB_CMDLINE_LINUX_DEFAULT="... initcall_debug log_buf_len=32M ..."
+
+	If you're using a kernel older than 3.11-rc2, the following simple
+		patch must be applied to enable ftrace data:
+        in file: kernel/power/suspend.c
+        in function: int suspend_devices_and_enter(suspend_state_t state)
+        remove call to "ftrace_stop();"
+        remove call to "ftrace_start();"
+
+        There is a patch which does this for kernel v3.8.0:
+        (kernel/pre-3.11-rc2/enable_ftrace_in_suspendresume.patch)
+
+
+
+------------------------------------------------------------------
+|                            USAGE                               |
+------------------------------------------------------------------
+
+Basic Usage
+___________
+
+ 1) First configure a kernel using the instructions from the previous sections.
+    Then build, install, and boot with it.
+ 2) Open up a terminal window and execute the mode list command:
+
+	%> sudo ./sleepgraph.py -modes
+		['freeze', 'mem', 'disk']
+
+ Execute a test using one of the available power modes, e.g. mem (S3):
+
+	%> sudo ./sleepgraph.py -m mem -rtcwake 15
+
+		or with a config file
+
+	%> sudo ./sleepgraph.py -config config/suspend.cfg
+
+ When the system comes back you'll see the script finishing up and
+ creating the output files in the test subdir. It generates output
+ files in subdirectory: suspend-mmddyy-HHMMSS. The ftrace file can
+ be used to regenerate the html timeline with different options
+
+     HTML output:                    <hostname>_<mode>.html
+     raw dmesg output:               <hostname>_<mode>_dmesg.txt
+     raw ftrace output:              <hostname>_<mode>_ftrace.txt
+
+ View the html in firefox or chrome.
+
+
+Dev Mode Usage
+______________
+
+ Developer mode adds information on low level source calls to the timeline.
+ The tool sets kprobes on all delay and mutex calls to see which devices
+ are waiting for something and when. It also sets a suite of kprobes on
+ subsystem dependent calls to better fill out the timeline.
+
+ The tool will also expose kernel threads that don't normally show up in the
+ timeline. This is useful in discovering dependent threads to get a better
+ idea of what each device is waiting for. For instance, the scsi_eh thread,
+ a.k.a. scsi resume error handler, is what each SATA disk device waits for
+ before it can continue resume.
+
+ The timeline will be much larger if run with dev mode, so it can be useful
+ to set the -mindev option to clip out any device blocks that are too small
+ to see easily. The following command will give a nice dev mode run:
+
+ %> sudo ./sleepgraph.py -m mem -rtcwake 15 -mindev 1 -dev
+
+	or with a config file
+
+ %> sudo ./sleepgraph.py -config config/suspend-dev.cfg
+
+
+Proc Mode Usage
+_______________
+
+ Proc mode adds user process info to the timeline. This is done in a manner
+ similar to the bootchart utility, which graphs init processes and their
+ execution as the system boots. This tool option does the same thing but for
+ the period before and after suspend/resume.
+
+ In order to see any process info, there needs to be some delay before or
+ after resume since processes are frozen in suspend_prepare and thawed in
+ resume_complete. The predelay and postdelay args allow you to do this. It
+ can also be useful to run in x2 mode with an x2 delay, this way you can
+ see process activity before and after resume, and in between two
+ successive suspend/resumes.
+
+ The command can be run like this:
+
+ %> sudo ./sleepgraph.py -m mem -rtcwake 15 -x2 -x2delay 1000 -predelay 1000 -postdelay 1000 -proc
+
+	or with a config file
+
+ %> sudo ./sleepgraph.py -config config/suspend-proc.cfg
+
+
+------------------------------------------------------------------
+|                    CONFIGURATION FILES                         |
+------------------------------------------------------------------
+
+ Since 4.0 we've moved to using config files in lieu of command line options.
+ The config folder contains a collection of typical use cases.
+ There are corresponding configs for other power modes:
+
+	Simple suspend/resume with basic timeline (mem/freeze/standby)
+		config/suspend.cfg
+		config/freeze.cfg
+		config/standby.cfg
+
+	Dev mode suspend/resume with dev timeline (mem/freeze/standby)
+		config/suspend-dev.cfg
+		config/freeze-dev.cfg
+		config/standby-dev.cfg
+
+	Simple suspend/resume with timeline and callgraph (mem/freeze/standby)
+		config/suspend-callgraph.cfg
+		config/freeze-callgraph.cfg
+		config/standby-callgraph.cfg
+
+	Sample proc mode x2 run using mem suspend
+		config/suspend-x2-proc.cfg
+
+	Sample for editing timeline funcs (moves internal functions into config)
+		config/custom-timeline-functions.cfg
+
+	Sample debug config for serio subsystem
+		config/debug-serio-suspend.cfg
+
+
+Usage Examples
+______________
+
+ Run a simple mem suspend:
+ %> sudo ./sleepgraph.py -config config/suspend.cfg
+
+ Run a mem suspend with callgraph data:
+ %> sudo ./sleepgraph.py -config config/suspend-callgraph.cfg
+
+ Run a mem suspend with dev mode detail:
+ %> sudo ./sleepgraph.py -config config/suspend-dev.cfg
+
+
+Config File Options
+___________________
+
+ [Settings]
+
+ # Verbosity: print verbose messages (def: false)
+ verbose: false
+
+ # Suspend Mode: e.g. standby, mem, freeze, disk (def: mem)
+ mode: mem
+
+ # Output Directory Format: {hostname}, {date}, {time} give current values
+ output-dir: suspend-{hostname}-{date}-{time}
+
+ # Automatic Wakeup: use rtcwake to wakeup after X seconds (def: infinity)
+ rtcwake: 15
+
+ # Add Logs: add the dmesg and ftrace log to the html output (def: false)
+ addlogs: false
+
+ # Sus/Res Gap: insert a gap between sus & res in the timeline (def: false)
+ srgap: false
+
+ # Custom Command: Command to execute in lieu of suspend (def: "")
+ command: echo mem > /sys/power/state
+
+ # Proc mode: graph user processes and cpu usage in the timeline (def: false)
+ proc: false
+
+ # Dev mode: graph source functions in the timeline (def: false)
+ dev: false
+
+ # Suspend/Resume x2: run 2 suspend/resumes back to back (def: false)
+ x2: false
+
+ # x2 Suspend Delay: time delay between the two test runs in ms (def: 0 ms)
+ x2delay: 0
+
+ # Pre Suspend Delay: nclude an N ms delay before (1st) suspend (def: 0 ms)
+ predelay: 0
+
+ # Post Resume Delay: include an N ms delay after (last) resume (def: 0 ms)
+ postdelay: 0
+
+ # Min Device Length: graph only dev callbacks longer than min (def: 0.001 ms)
+ mindev: 0.001
+
+ # Callgraph: gather ftrace callgraph data on all timeline events (def: false)
+ callgraph: false
+
+ # Expand Callgraph: pre-expand the callgraph treeviews in html (def: false)
+ expandcg: false
+
+ # Min Callgraph Length: show callgraphs only if longer than min (def: 1 ms)
+ mincg: 1
+
+ # Timestamp Precision: number of sig digits in timestamps (0:S, [3:ms], 6:us)
+ timeprec: 3
+
+ # Device Filter: show only devs whose name/driver includes one of these strings
+ devicefilter: _cpu_up,_cpu_down,i915,usb
+
+ # Override default timeline entries:
+ # Do not use the internal default functions for timeline entries (def: false)
+ # Set this to true if you intend to only use the ones defined in the config
+ override-timeline-functions: true
+
+ # Override default dev timeline entries:
+ # Do not use the internal default functions for dev timeline entries (def: false)
+ # Set this to true if you intend to only use the ones defined in the config
+ override-dev-timeline-functions: true
+
+ # Call Loop Max Gap (dev mode only)
+ # merge loops of the same call if each is less than maxgap apart (def: 100us)
+ callloop-maxgap: 0.0001
+
+ # Call Loop Max Length (dev mode only)
+ # merge loops of the same call if each is less than maxlen in length (def: 5ms)
+ callloop-maxlen: 0.005
+
+------------------------------------------------------------------
+|                   CUSTOM TIMELINE ENTRIES                      |
+------------------------------------------------------------------
+
+Adding or Editing Timeline Functions
+____________________________________
+
+ The tool uses an array of function names to fill out empty spaces in the
+ timeline where device callbacks don't appear. For instance, in suspend_prepare
+ the tool adds the sys_sync and freeze_processes calls as virtual device blocks
+ in the timeline to show you where the time is going. These calls should fill
+ the timeline with contiguous data so that most kernel execution is covered.
+
+ It is possible to add new function calls to the timeline by adding them to
+ the config. It's also possible to copy the internal timeline functions into
+ the config so that you can override and edit them. Place them in the
+ timeline_functions_ARCH section with the name of your architecture appended.
+ i.e. for x86_64: [timeline_functions_x86_64]
+
+ Use the override-timeline-functions option if you only want to use your
+ custom calls, or leave it false to append them to the internal ones.
+
+ This section includes a list of functions (set using kprobes) which use both
+ symbol data and function arg data. The args are pulled directly from the
+ stack using this architecture's registers and stack formatting. Each entry
+ can include up to four pieces of info: The function name, a format string,
+ an argument list, and a color. But only a function name is required.
+
+ For a full example config, see config/custom-timeline-functions.cfg. It pulls
+ all the internal timeline functions into the config and allows you to edit
+ them.
+
+  Entry format:
+
+    function: format{fn_arg1}_{fn_arg2} fn_arg1 fn_arg2 ... [color=purple]
+
+  Required Arguments:
+
+    function: The symbol name for the function you want probed, this is the
+              minimum required for an entry, it will show up as the function
+              name with no arguments.
+
+        example: _cpu_up:
+
+  Optional Arguments:
+
+    format: The format to display the data on the timeline in. Use braces to
+            enclose the arg names.
+
+        example: CPU_ON[{cpu}]
+
+    color: The color of the entry block in the timeline. The default color is
+           transparent, so the entry shares the phase color. The color is an
+           html color string, either a word, or an RGB.
+
+        example: [color=#CC00CC]
+
+    arglist: A list of arguments from registers/stack addresses. See URL:
+             https://www.kernel.org/doc/Documentation/trace/kprobetrace.txt
+
+        example: cpu=%di:s32
+
+ Here is a full example entry. It displays cpu resume calls in the timeline
+ in orange. They will appear as CPU_ON[0], CPU_ON[1], etc.
+
+  [timeline_functions_x86_64]
+  _cpu_up: CPU_ON[{cpu}] cpu=%di:s32 [color=orange]
+
+
+Adding or Editing Dev Mode Timeline Source Functions
+____________________________________________________
+
+ In dev mode, the tool uses an array of function names to monitor source
+ execution within the timeline entries.
+
+ The function calls are displayed inside the main device/call blocks in the
+ timeline. However, if a function call is not within a main timeline event,
+ it will spawn an entirely new event named after the caller's kernel thread.
+ These asynchronous kernel threads will populate in a separate section
+ beneath the main device/call section.
+
+ The tool has a set of hard coded calls which focus on the most common use
+ cases: msleep, udelay, schedule_timeout, mutex_lock_slowpath, etc. These are
+ the functions that add a hardcoded time delay to the suspend/resume path.
+ The tool also includes some common functions native to important
+ subsystems: ata, i915, and ACPI, etc.
+
+ It is possible to add new function calls to the dev timeline by adding them
+ to the config. It's also possible to copy the internal dev timeline
+ functions into the config so that you can override and edit them. Place them
+ in the dev_timeline_functions_ARCH section with the name of your architecture
+ appended. i.e. for x86_64: [dev_timeline_functions_x86_64]
+
+ Use the override-dev-timeline-functions option if you only want to use your
+ custom calls, or leave it false to append them to the internal ones.
+
+ The format is the same as the timeline_functions_x86_64 section. It's a
+ list of functions (set using kprobes) which use both symbol data and function
+ arg data. The args are pulled directly from the stack using this
+ architecture's registers and stack formatting. Each entry can include up
+ to four pieces of info: The function name, a format string, an argument list,
+ and a color. But only the function name is required.
+
+ For a full example config, see config/custom-timeline-functions.cfg. It pulls
+ all the internal dev timeline functions into the config and allows you to edit
+ them.
+
+ Here is a full example entry. It displays the ATA port reset calls as
+ ataN_port_reset in the timeline. This is where most of the SATA disk resume
+ time goes, so it can be helpful to see the low level call.
+
+  [dev_timeline_functions_x86_64]
+  ata_eh_recover: ata{port}_port_reset port=+36(%di):s32 [color=#CC00CC]
+
+
+Verifying your custom functions
+_______________________________
+
+ Once you have a set of functions (kprobes) defined, it can be useful to
+ perform a quick check to see if you formatted them correctly and if the system
+ actually supports them. To do this, run the tool with your config file
+ and the -status option. The tool will go through all the kprobes (both
+ custom and internal if you haven't overridden them) and actually attempts
+ to set them in ftrace. It will then print out success or fail for you.
+
+ Note that kprobes which don't actually exist in the kernel won't stop the
+ tool, they just wont show up.
+
+ For example:
+
+ sudo ./sleepgraph.py -config config/custom-timeline-functions.cfg -status
+ Checking this system (myhostname)...
+    have root access: YES
+    is sysfs mounted: YES
+    is "mem" a valid power mode: YES
+    is ftrace supported: YES
+    are kprobes supported: YES
+    timeline data source: FTRACE (all trace events found)
+    is rtcwake supported: YES
+    verifying timeline kprobes work:
+         _cpu_down: YES
+         _cpu_up: YES
+         acpi_pm_finish: YES
+         acpi_pm_prepare: YES
+         freeze_kernel_threads: YES
+         freeze_processes: YES
+         sys_sync: YES
+         thaw_processes: YES
+    verifying dev kprobes work:
+         __const_udelay: YES
+         __mutex_lock_slowpath: YES
+         acpi_os_stall: YES
+         acpi_ps_parse_aml: YES
+         intel_opregion_init: NO
+         intel_opregion_register: NO
+         intel_opregion_setup: NO
+         msleep: YES
+         schedule_timeout: YES
+         schedule_timeout_uninterruptible: YES
+         usleep_range: YES
+
+
+------------------------------------------------------------------
+|           TESTING ON CONSUMER LINUX OPERATING SYSTEMS          |
+------------------------------------------------------------------
+
+Android
+_______
+
+ The easiest way to execute on an android device is to run the android.sh
+ script on the device, then pull the ftrace log back to the host and run
+ sleepgraph.py on it.
+
+ Here are the steps:
+
+ [download and install the tool on the device]
+
+	host%> wget https://raw.githubusercontent.com/intel/pm-graph/master/tools/android.sh
+	host%> adb connect 192.168.1.6
+	host%> adb root
+	# push the script to a writeable location
+	host%> adb push android.sh /sdcard/
+
+ [check whether the tool will run on your device]
+
+	host%> adb shell
+	dev%> cd /sdcard
+	dev%> sh android.sh status
+		host    : asus_t100
+		kernel  : 3.14.0-i386-dirty
+		modes   : freeze mem
+		rtcwake : supported
+		ftrace  : supported
+		trace events {
+		    suspend_resume: found
+		    device_pm_callback_end: found
+		    device_pm_callback_start: found
+		}
+	# the above is what you see on a system that's properly patched
+
+ [execute the suspend]
+
+	# NOTE: The suspend will only work if the screen isn't timed out,
+	# so you have to press some keys first to wake it up b4 suspend)
+	dev%> sh android.sh suspend mem
+	------------------------------------
+	Suspend/Resume timing test initiated
+	------------------------------------
+	hostname   : asus_t100
+	kernel     : 3.14.0-i386-dirty
+	mode       : mem
+	ftrace out : /mnt/shell/emulated/0/ftrace.txt
+	dmesg out  : /mnt/shell/emulated/0/dmesg.txt
+	log file   : /mnt/shell/emulated/0/log.txt
+	------------------------------------
+	INITIALIZING FTRACE........DONE
+	STARTING FTRACE
+	SUSPEND START @ 21:24:02 (rtcwake in 10 seconds)
+	<adb connection will now terminate>
+
+ [retrieve the data from the device]
+
+	# I find that you have to actually kill the adb process and
+	# reconnect sometimes in order for the connection to work post-suspend
+	host%> adb connect 192.168.1.6
+	# (required) get the ftrace data, this is the most important piece
+	host%> adb pull /sdcard/ftrace.txt
+	# (optional) get the dmesg data, this is for debugging
+	host%> adb pull /sdcard/dmesg.txt
+	# (optional) get the log, which just lists some test times for comparison
+	host%> adb pull /sdcard/log.txt
+
+ [create an output html file using sleepgraph.py]
+
+	host%> sleepgraph.py -ftrace ftrace.txt
+
+ You should now have an output.html with the android data, enjoy!
diff --git a/tools/power/pm-graph/bootgraph.py b/tools/power/pm-graph/bootgraph.py
index 3d899dd8147a..666bcbda648d 100755
--- a/tools/power/pm-graph/bootgraph.py
+++ b/tools/power/pm-graph/bootgraph.py
@@ -325,9 +325,9 @@ def parseKernelLog():
 			if(not sysvals.stamp['kernel']):
 				sysvals.stamp['kernel'] = sysvals.kernelVersion(msg)
 			continue
-		m = re.match('.* setting system clock to (?P<t>.*) UTC.*', msg)
+		m = re.match('.* setting system clock to (?P<d>[0-9\-]*)[ A-Z](?P<t>[0-9:]*) UTC.*', msg)
 		if(m):
-			bt = datetime.strptime(m.group('t'), '%Y-%m-%d %H:%M:%S')
+			bt = datetime.strptime(m.group('d')+' '+m.group('t'), '%Y-%m-%d %H:%M:%S')
 			bt = bt - timedelta(seconds=int(ktime))
 			data.boottime = bt.strftime('%Y-%m-%d_%H:%M:%S')
 			sysvals.stamp['time'] = bt.strftime('%B %d %Y, %I:%M:%S %p')
@@ -348,7 +348,7 @@ def parseKernelLog():
 				data.newAction(phase, f, pid, start, ktime, int(r), int(t))
 				del devtemp[f]
 			continue
-		if(re.match('^Freeing unused kernel memory.*', msg)):
+		if(re.match('^Freeing unused kernel .*', msg)):
 			data.tUserMode = ktime
 			data.dmesg['kernel']['end'] = ktime
 			data.dmesg['user']['start'] = ktime
@@ -1008,7 +1008,7 @@ if __name__ == '__main__':
 			updateKernelParams()
 		elif cmd == 'flistall':
 			for f in sysvals.getBootFtraceFilterFunctions():
-				print f
+				print(f)
 		elif cmd == 'checkbl':
 			sysvals.getBootLoader()
 			pprint('Boot Loader: %s\n%s' % (sysvals.bootloader, sysvals.blexec))
diff --git a/tools/power/pm-graph/config/example.cfg b/tools/power/pm-graph/config/example.cfg
index 05b2efb9bb54..1ef3eb9383fa 100644
--- a/tools/power/pm-graph/config/example.cfg
+++ b/tools/power/pm-graph/config/example.cfg
@@ -98,12 +98,34 @@ postdelay: 0
 # graph only devices longer than min in the timeline (default: 0.001 ms)
 mindev: 0.001
 
+# Call Loop Max Gap (dev mode only)
+# merge loops of the same call if each is less than maxgap apart (def: 100us)
+callloop-maxgap: 0.0001
+
+# Call Loop Max Length (dev mode only)
+# merge loops of the same call if each is less than maxlen in length (def: 5ms)
+callloop-maxlen: 0.005
+
+# Override default timeline entries:
+# Do not use the internal default functions for timeline entries (def: false)
+# Set this to true if you intend to only use the ones defined in the config
+override-timeline-functions: true
+
+# Override default dev timeline entries:
+# Do not use the internal default functions for dev timeline entries (def: false)
+# Set this to true if you intend to only use the ones defined in the config
+override-dev-timeline-functions: true
+
 # ---- Debug Options ----
 
 # Callgraph
 # gather detailed ftrace callgraph data on all timeline events (default: false)
 callgraph: false
 
+# Max graph depth
+# limit the callgraph trace to this depth (default: 0 = all)
+maxdepth: 2
+
 # Callgraph phase filter
 # Only enable callgraphs for one phase, i.e. resume_noirq (default: all)
 cgphase: suspend
@@ -131,3 +153,7 @@ timeprec: 6
 # Add kprobe functions to the timeline
 # Add functions to the timeline from a text file (default: no-action)
 # fadd: file.txt
+
+# Ftrace buffer size
+# Set trace buffer size to N kilo-bytes (default: all of free memory up to 3GB)
+# bufsize: 1000
diff --git a/tools/power/pm-graph/sleepgraph.8 b/tools/power/pm-graph/sleepgraph.8
index 24a2e7d0ae63..9648be644d5f 100644
--- a/tools/power/pm-graph/sleepgraph.8
+++ b/tools/power/pm-graph/sleepgraph.8
@@ -53,6 +53,11 @@ disable rtcwake and require a user keypress to resume.
 Add the dmesg and ftrace logs to the html output. They will be viewable by
 clicking buttons in the timeline.
 .TP
+\fB-turbostat\fR
+Use turbostat to execute the command in freeze mode (default: disabled). This
+will provide turbostat output in the log which will tell you which actual
+power modes were entered.
+.TP
 \fB-result \fIfile\fR
 Export a results table to a text file for parsing.
 .TP
@@ -121,6 +126,10 @@ be created in a new subdirectory with a summary page: suspend-xN-{date}-{time}.
 Use ftrace to create device callgraphs (default: disabled). This can produce
 very large outputs, i.e. 10MB - 100MB.
 .TP
+\fB-ftop\fR
+Use ftrace on the top level call: "suspend_devices_and_enter" only (default: disabled).
+This option implies -f and creates a single callgraph covering all of suspend/resume.
+.TP
 \fB-maxdepth \fIlevel\fR
 limit the callgraph trace depth to \fIlevel\fR (default: 0=all). This is
 the best way to limit the output size when using callgraphs via -f.
@@ -138,8 +147,8 @@ which are barely visible in the timeline.
 The value is a float: e.g. 0.001 represents 1 us.
 .TP
 \fB-cgfilter \fI"func1,func2,..."\fR
-Reduce callgraph output in the timeline by limiting it to a list of calls. The
-argument can be a single function name or a comma delimited list.
+Reduce callgraph output in the timeline by limiting it certain devices. The
+argument can be a single device name or a comma delimited list.
 (default: none)
 .TP
 \fB-cgskip \fIfile\fR
@@ -183,6 +192,9 @@ Print out the contents of the ACPI Firmware Performance Data Table.
 \fB-battery\fR
 Print out battery status and current charge.
 .TP
+\fB-wifi\fR
+Print out wifi status and connection details.
+.TP
 \fB-xon/-xoff/-xstandby/-xsuspend\fR
 Test xset by attempting to switch the display to the given mode. This
 is the same command which will be issued by \fB-display \fImode\fR.
diff --git a/tools/power/pm-graph/sleepgraph.py b/tools/power/pm-graph/sleepgraph.py
index d1a88d05e976..4f46a7a1feb6 100755
--- a/tools/power/pm-graph/sleepgraph.py
+++ b/tools/power/pm-graph/sleepgraph.py
@@ -9,9 +9,9 @@
 #
 # Links:
 #	 Home Page
-#	   https://01.org/suspendresume
+#	   https://01.org/pm-graph
 #	 Source repo
-#	   git@github.com:01org/pm-graph
+#	   git@github.com:intel/pm-graph
 #
 # Description:
 #	 This tool is designed to assist kernel and OS developers in optimizing
@@ -24,6 +24,7 @@
 #	 viewed in firefox or chrome.
 #
 #	 The following kernel build options are required:
+#		 CONFIG_DEVMEM=y
 #		 CONFIG_PM_DEBUG=y
 #		 CONFIG_PM_SLEEP_DEBUG=y
 #		 CONFIG_FTRACE=y
@@ -53,6 +54,7 @@ import ConfigParser
 import gzip
 from threading import Thread
 from subprocess import call, Popen, PIPE
+import base64
 
 def pprint(msg):
 	print(msg)
@@ -66,7 +68,7 @@ def pprint(msg):
 #	 store system values and test parameters
 class SystemValues:
 	title = 'SleepGraph'
-	version = '5.2'
+	version = '5.4'
 	ansi = False
 	rs = 0
 	display = ''
@@ -74,8 +76,9 @@ class SystemValues:
 	sync = False
 	verbose = False
 	testlog = True
-	dmesglog = False
+	dmesglog = True
 	ftracelog = False
+	tstat = False
 	mindevlen = 0.0
 	mincglen = 0.0
 	cgphase = ''
@@ -99,6 +102,8 @@ class SystemValues:
 	pmdpath = '/sys/power/pm_debug_messages'
 	traceevents = [
 		'suspend_resume',
+		'wakeup_source_activate',
+		'wakeup_source_deactivate',
 		'device_pm_callback_end',
 		'device_pm_callback_start'
 	]
@@ -130,6 +135,8 @@ class SystemValues:
 	x2delay = 0
 	skiphtml = False
 	usecallgraph = False
+	ftopfunc = 'suspend_devices_and_enter'
+	ftop = False
 	usetraceevents = False
 	usetracemarkers = True
 	usekprobes = True
@@ -158,6 +165,13 @@ class SystemValues:
 		'acpi_hibernation_leave': {},
 		'acpi_pm_freeze': {},
 		'acpi_pm_thaw': {},
+		'acpi_s2idle_end': {},
+		'acpi_s2idle_sync': {},
+		'acpi_s2idle_begin': {},
+		'acpi_s2idle_prepare': {},
+		'acpi_s2idle_wake': {},
+		'acpi_s2idle_wakeup': {},
+		'acpi_s2idle_restore': {},
 		'hibernate_preallocate_memory': {},
 		'create_basic_memory_bitmaps': {},
 		'swsusp_write': {},
@@ -191,9 +205,14 @@ class SystemValues:
 		'usleep_range': { 'args_x86_64': {'min':'%di:s32', 'max':'%si:s32'}, 'ub': 1 },
 		'mutex_lock_slowpath': { 'func':'__mutex_lock_slowpath', 'ub': 1 },
 		'acpi_os_stall': {'ub': 1},
+		'rt_mutex_slowlock': {'ub': 1},
 		# ACPI
 		'acpi_resume_power_resources': {},
-		'acpi_ps_parse_aml': {},
+		'acpi_ps_execute_method': { 'args_x86_64': {
+			'fullpath':'+0(+40(%di)):string',
+		}},
+		# mei_me
+		'mei_reset': {},
 		# filesystem
 		'ext4_sync_fs': {},
 		# 80211
@@ -242,6 +261,7 @@ class SystemValues:
 	timeformat = '%.3f'
 	cmdline = '%s %s' % \
 			(os.path.basename(sys.argv[0]), ' '.join(sys.argv[1:]))
+	kparams = ''
 	sudouser = ''
 	def __init__(self):
 		self.archargs = 'args_'+platform.machine()
@@ -320,6 +340,7 @@ class SystemValues:
 		args['date'] = n.strftime('%y%m%d')
 		args['time'] = n.strftime('%H%M%S')
 		args['hostname'] = args['host'] = self.hostname
+		args['mode'] = self.suspendmode
 		return value.format(**args)
 	def setOutputFile(self):
 		if self.dmesgfile != '':
@@ -331,21 +352,28 @@ class SystemValues:
 			if(m):
 				self.htmlfile = m.group('name')+'.html'
 	def systemInfo(self, info):
-		p = c = m = b = ''
+		p = m = ''
 		if 'baseboard-manufacturer' in info:
 			m = info['baseboard-manufacturer']
 		elif 'system-manufacturer' in info:
 			m = info['system-manufacturer']
-		if 'baseboard-product-name' in info:
-			p = info['baseboard-product-name']
-		elif 'system-product-name' in info:
+		if 'system-product-name' in info:
 			p = info['system-product-name']
-		if 'processor-version' in info:
-			c = info['processor-version']
-		if 'bios-version' in info:
-			b = info['bios-version']
-		self.sysstamp = '# sysinfo | man:%s | plat:%s | cpu:%s | bios:%s | numcpu:%d | memsz:%d | memfr:%d' % \
-			(m, p, c, b, self.cpucount, self.memtotal, self.memfree)
+		elif 'baseboard-product-name' in info:
+			p = info['baseboard-product-name']
+		if m[:5].lower() == 'intel' and 'baseboard-product-name' in info:
+			p = info['baseboard-product-name']
+		c = info['processor-version'] if 'processor-version' in info else ''
+		b = info['bios-version'] if 'bios-version' in info else ''
+		r = info['bios-release-date'] if 'bios-release-date' in info else ''
+		self.sysstamp = '# sysinfo | man:%s | plat:%s | cpu:%s | bios:%s | biosdate:%s | numcpu:%d | memsz:%d | memfr:%d' % \
+			(m, p, c, b, r, self.cpucount, self.memtotal, self.memfree)
+		try:
+			kcmd = open('/proc/cmdline', 'r').read().strip()
+		except:
+			kcmd = ''
+		if kcmd:
+			self.sysstamp += '\n# kparams | %s' % kcmd
 	def printSystemInfo(self, fatal=False):
 		self.rootCheck(True)
 		out = dmidecode(self.mempath, fatal)
@@ -353,10 +381,10 @@ class SystemValues:
 			return
 		fmt = '%-24s: %s'
 		for name in sorted(out):
-			print fmt % (name, out[name])
-		print fmt % ('cpucount', ('%d' % self.cpucount))
-		print fmt % ('memtotal', ('%d kB' % self.memtotal))
-		print fmt % ('memfree', ('%d kB' % self.memfree))
+			print(fmt % (name, out[name]))
+		print(fmt % ('cpucount', ('%d' % self.cpucount)))
+		print(fmt % ('memtotal', ('%d kB' % self.memtotal)))
+		print(fmt % ('memfree', ('%d kB' % self.memfree)))
 	def cpuInfo(self):
 		self.cpucount = 0
 		fp = open('/proc/cpuinfo', 'r')
@@ -376,7 +404,7 @@ class SystemValues:
 	def initTestOutput(self, name):
 		self.prefix = self.hostname
 		v = open('/proc/version', 'r').read().strip()
-		kver = string.split(v)[2]
+		kver = v.split()[2]
 		fmt = name+'-%m%d%y-%H%M%S'
 		testtime = datetime.now().strftime(fmt)
 		self.teststamp = \
@@ -391,7 +419,7 @@ class SystemValues:
 		self.htmlfile = \
 			self.testdir+'/'+self.prefix+'_'+self.suspendmode+'.html'
 		if not os.path.isdir(self.testdir):
-			os.mkdir(self.testdir)
+			os.makedirs(self.testdir)
 	def getValueList(self, value):
 		out = []
 		for i in value.split(','):
@@ -402,6 +430,12 @@ class SystemValues:
 		self.devicefilter = self.getValueList(value)
 	def setCallgraphFilter(self, value):
 		self.cgfilter = self.getValueList(value)
+	def skipKprobes(self, value):
+		for k in self.getValueList(value):
+			if k in self.tracefuncs:
+				del self.tracefuncs[k]
+			if k in self.dev_tracefuncs:
+				del self.dev_tracefuncs[k]
 	def setCallgraphBlacklist(self, file):
 		self.cgblacklist = self.listFromFile(file)
 	def rtcWakeAlarmOn(self):
@@ -471,9 +505,9 @@ class SystemValues:
 			if 'func' in self.tracefuncs[i]:
 				i = self.tracefuncs[i]['func']
 			if i in master:
-				print i
+				print(i)
 			else:
-				print self.colorText(i)
+				print(self.colorText(i))
 	def setFtraceFilterFunctions(self, list):
 		master = self.listFromFile(self.tpath+'available_filter_functions')
 		flist = ''
@@ -680,7 +714,8 @@ class SystemValues:
 		if self.bufsize > 0:
 			tgtsize = self.bufsize
 		elif self.usecallgraph or self.usedevsrc:
-			bmax = (1*1024*1024) if self.suspendmode == 'disk' else (3*1024*1024)
+			bmax = (1*1024*1024) if self.suspendmode in ['disk', 'command'] \
+				else (3*1024*1024)
 			tgtsize = min(self.memfree, bmax)
 		else:
 			tgtsize = 65536
@@ -715,7 +750,10 @@ class SystemValues:
 					cf.append(self.tracefuncs[fn]['func'])
 				else:
 					cf.append(fn)
-			self.setFtraceFilterFunctions(cf)
+			if self.ftop:
+				self.setFtraceFilterFunctions([self.ftopfunc])
+			else:
+				self.setFtraceFilterFunctions(cf)
 		# initialize the kprobe trace
 		elif self.usekprobes:
 			for name in self.tracefuncs:
@@ -768,9 +806,21 @@ class SystemValues:
 				fw = test['fw']
 				if(fw):
 					fp.write('# fwsuspend %u fwresume %u\n' % (fw[0], fw[1]))
+			if 'mcelog' in test:
+				fp.write('# mcelog %s\n' % test['mcelog'])
+			if 'turbo' in test:
+				fp.write('# turbostat %s\n' % test['turbo'])
 			if 'bat' in test:
 				(a1, c1), (a2, c2) = test['bat']
 				fp.write('# battery %s %d %s %d\n' % (a1, c1, a2, c2))
+			if 'wifi' in test:
+				wstr = []
+				for wifi in test['wifi']:
+					tmp = []
+					for key in sorted(wifi):
+						tmp.append('%s:%s' % (key, wifi[key]))
+					wstr.append('|'.join(tmp))
+				fp.write('# wifi %s\n' % (','.join(wstr)))
 			if test['error'] or len(testdata) > 1:
 				fp.write('# enter_sleep_error %s\n' % test['error'])
 		return fp
@@ -821,6 +871,106 @@ class SystemValues:
 		if isgz:
 			return gzip.open(filename, mode+'b')
 		return open(filename, mode)
+	def mcelog(self, clear=False):
+		cmd = self.getExec('mcelog')
+		if not cmd:
+			return ''
+		if clear:
+			call(cmd+' > /dev/null 2>&1', shell=True)
+			return ''
+		fp = Popen([cmd], stdout=PIPE, stderr=PIPE).stdout
+		out = fp.read().strip()
+		fp.close()
+		if not out:
+			return ''
+		return base64.b64encode(out.encode('zlib'))
+	def haveTurbostat(self):
+		if not self.tstat:
+			return False
+		cmd = self.getExec('turbostat')
+		if not cmd:
+			return False
+		fp = Popen([cmd, '-v'], stdout=PIPE, stderr=PIPE).stderr
+		out = fp.read().strip()
+		fp.close()
+		return re.match('turbostat version [0-9\.]* .*', out)
+	def turbostat(self):
+		cmd = self.getExec('turbostat')
+		if not cmd:
+			return 'missing turbostat executable'
+		text = []
+		fullcmd = '%s -q -S echo freeze > %s' % (cmd, self.powerfile)
+		fp = Popen(['sh', '-c', fullcmd], stdout=PIPE, stderr=PIPE).stderr
+		for line in fp:
+			if re.match('[0-9.]* sec', line):
+				continue
+			text.append(line.split())
+		fp.close()
+		if len(text) < 2:
+			return 'turbostat output format error'
+		out = []
+		for key in text[0]:
+			values = []
+			idx = text[0].index(key)
+			for line in text[1:]:
+				if len(line) > idx:
+					values.append(line[idx])
+			out.append('%s=%s' % (key, ','.join(values)))
+		return '|'.join(out)
+	def checkWifi(self):
+		out = dict()
+		iwcmd, ifcmd = self.getExec('iwconfig'), self.getExec('ifconfig')
+		if not iwcmd or not ifcmd:
+			return out
+		fp = Popen(iwcmd, stdout=PIPE, stderr=PIPE).stdout
+		for line in fp:
+			m = re.match('(?P<dev>\S*) .* ESSID:(?P<ess>\S*)', line)
+			if not m:
+				continue
+			out['device'] = m.group('dev')
+			if '"' in m.group('ess'):
+				out['essid'] = m.group('ess').strip('"')
+				break
+		fp.close()
+		if 'device' in out:
+			fp = Popen([ifcmd, out['device']], stdout=PIPE, stderr=PIPE).stdout
+			for line in fp:
+				m = re.match('.* inet (?P<ip>[0-9\.]*)', line)
+				if m:
+					out['ip'] = m.group('ip')
+					break
+			fp.close()
+		return out
+	def errorSummary(self, errinfo, msg):
+		found = False
+		for entry in errinfo:
+			if re.match(entry['match'], msg):
+				entry['count'] += 1
+				if self.hostname not in entry['urls']:
+					entry['urls'][self.hostname] = [self.htmlfile]
+				elif self.htmlfile not in entry['urls'][self.hostname]:
+					entry['urls'][self.hostname].append(self.htmlfile)
+				found = True
+				break
+		if found:
+			return
+		arr = msg.split()
+		for j in range(len(arr)):
+			if re.match('^[0-9,\-\.]*$', arr[j]):
+				arr[j] = '[0-9,\-\.]*'
+			else:
+				arr[j] = arr[j]\
+					.replace('\\', '\\\\').replace(']', '\]').replace('[', '\[')\
+					.replace('.', '\.').replace('+', '\+').replace('*', '\*')\
+					.replace('(', '\(').replace(')', '\)')
+		mstr = ' '.join(arr)
+		entry = {
+			'line': msg,
+			'match': mstr,
+			'count': 1,
+			'urls': {self.hostname: [self.htmlfile]}
+		}
+		errinfo.append(entry)
 
 sysvals = SystemValues()
 switchvalues = ['enable', 'disable', 'on', 'off', 'true', 'false', '1', '0']
@@ -915,7 +1065,14 @@ class Data:
 		'ERROR'   : '.*ERROR.*',
 		'WARNING' : '.*WARNING.*',
 		'IRQ'     : '.*genirq: .*',
-		'TASKFAIL': '.*Freezing of tasks failed.*',
+		'TASKFAIL': '.*Freezing of tasks *.*',
+		'ACPI'    : '.*ACPI *(?P<b>[A-Za-z]*) *Error[: ].*',
+		'DEVFAIL' : '.* failed to (?P<b>[a-z]*) async: .*',
+		'DISKFULL': '.*No space left on device.*',
+		'USBERR'  : '.*usb .*device .*, error [0-9-]*',
+		'ATAERR'  : ' *ata[0-9\.]*: .*failed.*',
+		'MEIERR'  : ' *mei.*: .*failed.*',
+		'TPMERR'  : '(?i) *tpm *tpm[0-9]*: .*error.*',
 	}
 	def __init__(self, num):
 		idchar = 'abcdefghij'
@@ -933,6 +1090,9 @@ class Data:
 		self.outfile = ''
 		self.kerror = False
 		self.battery = 0
+		self.wifi = 0
+		self.turbostat = 0
+		self.mcelog = 0
 		self.enterfail = ''
 		self.currphase = ''
 		self.pstl = dict()    # process timeline
@@ -967,8 +1127,24 @@ class Data:
 		if len(plist) < 1:
 			return ''
 		return plist[-1]
+	def turbostatInfo(self):
+		tp = TestProps()
+		out = {'syslpi':'N/A','pkgpc10':'N/A'}
+		for line in self.dmesgtext:
+			m = re.match(tp.tstatfmt, line)
+			if not m:
+				continue
+			for i in m.group('t').split('|'):
+				if 'SYS%LPI' in i:
+					out['syslpi'] = i.split('=')[-1]+'%'
+				elif 'pc10' in i:
+					out['pkgpc10'] = i.split('=')[-1]+'%'
+			break
+		return out
 	def extractErrorInfo(self):
-		lf = sysvals.openlog(sysvals.dmesgfile, 'r')
+		lf = self.dmesgtext
+		if len(self.dmesgtext) < 1 and sysvals.dmesgfile:
+			lf = sysvals.openlog(sysvals.dmesgfile, 'r')
 		i = 0
 		list = []
 		for line in lf:
@@ -983,16 +1159,19 @@ class Data:
 			msg = m.group('msg')
 			for err in self.errlist:
 				if re.match(self.errlist[err], msg):
-					list.append((err, dir, t, i, i))
+					list.append((msg, err, dir, t, i, i))
 					self.kerror = True
 					break
-		for e in list:
-			type, dir, t, idx1, idx2 = e
+		msglist = []
+		for msg, type, dir, t, idx1, idx2 in list:
+			msglist.append(msg)
 			sysvals.vprint('kernel %s found in %s at %f' % (type, dir, t))
 			self.errorinfo[dir].append((type, t, idx1, idx2))
 		if self.kerror:
 			sysvals.dmesglog = True
-		lf.close()
+		if len(self.dmesgtext) < 1 and sysvals.dmesgfile:
+			lf.close()
+		return msglist
 	def setStart(self, time):
 		self.start = time
 	def setEnd(self, time):
@@ -2045,7 +2224,7 @@ class FTraceCallGraph:
 			if(data.dmesg[p]['start'] <= self.start and
 				self.start <= data.dmesg[p]['end']):
 				list = data.dmesg[p]['list']
-				for devname in list:
+				for devname in sorted(list, key=lambda k:list[k]['start']):
 					dev = list[devname]
 					if(pid == dev['pid'] and
 						self.start <= dev['start'] and
@@ -2350,6 +2529,9 @@ class TestProps:
 				'(?P<H>[0-9]{2})(?P<M>[0-9]{2})(?P<S>[0-9]{2})'+\
 				' (?P<host>.*) (?P<mode>.*) (?P<kernel>.*)$'
 	batteryfmt = '^# battery (?P<a1>\w*) (?P<c1>\d*) (?P<a2>\w*) (?P<c2>\d*)'
+	wififmt    = '^# wifi (?P<w>.*)'
+	tstatfmt   = '^# turbostat (?P<t>\S*)'
+	mcelogfmt  = '^# mcelog (?P<m>\S*)'
 	testerrfmt = '^# enter_sleep_error (?P<e>.*)'
 	sysinfofmt = '^# sysinfo .*'
 	cmdlinefmt = '^# command \| (?P<cmd>.*)'
@@ -2372,7 +2554,10 @@ class TestProps:
 		self.cmdline = ''
 		self.kparams = ''
 		self.testerror = []
+		self.mcelog = []
+		self.turbostat = []
 		self.battery = []
+		self.wifi = []
 		self.fwdata = []
 		self.ftrace_line_fmt = self.ftrace_line_fmt_nop
 		self.cgformat = False
@@ -2386,6 +2571,44 @@ class TestProps:
 			self.ftrace_line_fmt = self.ftrace_line_fmt_nop
 		else:
 			doError('Invalid tracer format: [%s]' % tracer)
+	def decode(self, data):
+		try:
+			out = base64.b64decode(data).decode('zlib')
+		except:
+			out = data
+		return out
+	def stampInfo(self, line):
+		if re.match(self.stampfmt, line):
+			self.stamp = line
+			return True
+		elif re.match(self.sysinfofmt, line):
+			self.sysinfo = line
+			return True
+		elif re.match(self.kparamsfmt, line):
+			self.kparams = line
+			return True
+		elif re.match(self.cmdlinefmt, line):
+			self.cmdline = line
+			return True
+		elif re.match(self.mcelogfmt, line):
+			self.mcelog.append(line)
+			return True
+		elif re.match(self.tstatfmt, line):
+			self.turbostat.append(line)
+			return True
+		elif re.match(self.batteryfmt, line):
+			self.battery.append(line)
+			return True
+		elif re.match(self.wififmt, line):
+			self.wifi.append(line)
+			return True
+		elif re.match(self.testerrfmt, line):
+			self.testerror.append(line)
+			return True
+		elif re.match(self.firmwarefmt, line):
+			self.fwdata.append(line)
+			return True
+		return False
 	def parseStamp(self, data, sv):
 		# global test data
 		m = re.match(self.stampfmt, self.stamp)
@@ -2428,14 +2651,31 @@ class TestProps:
 			sv.stamp = data.stamp
 		# firmware data
 		if sv.suspendmode == 'mem' and len(self.fwdata) > data.testnumber:
-			data.fwSuspend, data.fwResume = self.fwdata[data.testnumber]
-			if(data.fwSuspend > 0 or data.fwResume > 0):
-				data.fwValid = True
+			m = re.match(self.firmwarefmt, self.fwdata[data.testnumber])
+			if m:
+				data.fwSuspend, data.fwResume = int(m.group('s')), int(m.group('r'))
+				if(data.fwSuspend > 0 or data.fwResume > 0):
+					data.fwValid = True
+		# mcelog data
+		if len(self.mcelog) > data.testnumber:
+			m = re.match(self.mcelogfmt, self.mcelog[data.testnumber])
+			if m:
+				data.mcelog = self.decode(m.group('m'))
+		# turbostat data
+		if len(self.turbostat) > data.testnumber:
+			m = re.match(self.tstatfmt, self.turbostat[data.testnumber])
+			if m:
+				data.turbostat = m.group('t')
 		# battery data
 		if len(self.battery) > data.testnumber:
 			m = re.match(self.batteryfmt, self.battery[data.testnumber])
 			if m:
 				data.battery = m.groups()
+		# wifi data
+		if len(self.wifi) > data.testnumber:
+			m = re.match(self.wififmt, self.wifi[data.testnumber])
+			if m:
+				data.wifi = m.group('w')
 		# sleep mode enter errors
 		if len(self.testerror) > data.testnumber:
 			m = re.match(self.testerrfmt, self.testerror[data.testnumber])
@@ -2505,9 +2745,9 @@ class ProcessMonitor:
 #	 Quickly determine if the ftrace log has all of the trace events,
 #	 markers, and/or kprobes required for primary parsing.
 def doesTraceLogHaveTraceEvents():
-	kpcheck = ['_cal: (', '_cpu_down()']
+	kpcheck = ['_cal: (', '_ret: (']
 	techeck = ['suspend_resume', 'device_pm_callback']
-	tmcheck = ['tracing_mark_write']
+	tmcheck = ['SUSPEND START', 'RESUME COMPLETE']
 	sysvals.usekprobes = False
 	fp = sysvals.openlog(sysvals.ftracefile, 'r')
 	for line in fp:
@@ -2556,21 +2796,7 @@ def appendIncompleteTraceLog(testruns):
 	for line in tf:
 		# remove any latent carriage returns
 		line = line.replace('\r\n', '')
-		# grab the stamp and sysinfo
-		if re.match(tp.stampfmt, line):
-			tp.stamp = line
-			continue
-		elif re.match(tp.sysinfofmt, line):
-			tp.sysinfo = line
-			continue
-		elif re.match(tp.cmdlinefmt, line):
-			tp.cmdline = line
-			continue
-		elif re.match(tp.batteryfmt, line):
-			tp.battery.append(line)
-			continue
-		elif re.match(tp.testerrfmt, line):
-			tp.testerror.append(line)
+		if tp.stampInfo(line):
 			continue
 		# determine the trace data type (required for further parsing)
 		m = re.match(tp.tracertypefmt, line)
@@ -2693,26 +2919,7 @@ def parseTraceLog(live=False):
 	for line in tf:
 		# remove any latent carriage returns
 		line = line.replace('\r\n', '')
-		# stamp and sysinfo lines
-		if re.match(tp.stampfmt, line):
-			tp.stamp = line
-			continue
-		elif re.match(tp.sysinfofmt, line):
-			tp.sysinfo = line
-			continue
-		elif re.match(tp.cmdlinefmt, line):
-			tp.cmdline = line
-			continue
-		elif re.match(tp.batteryfmt, line):
-			tp.battery.append(line)
-			continue
-		elif re.match(tp.testerrfmt, line):
-			tp.testerror.append(line)
-			continue
-		# firmware line: pull out any firmware data
-		m = re.match(tp.firmwarefmt, line)
-		if(m):
-			tp.fwdata.append((int(m.group('s')), int(m.group('r'))))
+		if tp.stampInfo(line):
 			continue
 		# tracer type line: determine the trace data type
 		m = re.match(tp.tracertypefmt, line)
@@ -2925,7 +3132,7 @@ def parseTraceLog(live=False):
 				tp.ktemp[key].append({
 					'pid': pid,
 					'begin': t.time,
-					'end': t.time,
+					'end': -1,
 					'name': displayname,
 					'cdata': kprobedata,
 					'proc': m_proc,
@@ -2936,12 +3143,11 @@ def parseTraceLog(live=False):
 			elif(t.freturn):
 				if(key not in tp.ktemp) or len(tp.ktemp[key]) < 1:
 					continue
-				e = tp.ktemp[key][-1]
-				if e['begin'] < 0.0 or t.time - e['begin'] < 0.000001:
-					tp.ktemp[key].pop()
-				else:
-					e['end'] = t.time
-					e['rdata'] = kprobedata
+				e = next((x for x in reversed(tp.ktemp[key]) if x['end'] < 0), 0)
+				if not e:
+					continue
+				e['end'] = t.time
+				e['rdata'] = kprobedata
 				# end of kernel resume
 				if(phase != 'suspend_prepare' and kprobename in krescalls):
 					if phase in data.dmesg:
@@ -2963,8 +3169,10 @@ def parseTraceLog(live=False):
 			if(res == -1):
 				testrun.ftemp[key][-1].addLine(t)
 	tf.close()
+	if len(testdata) < 1:
+		sysvals.vprint('WARNING: ftrace start marker is missing')
 	if data and not data.devicegroups:
-		sysvals.vprint('WARNING: end marker is missing')
+		sysvals.vprint('WARNING: ftrace end marker is missing')
 		data.handleEndMarker(t.time)
 
 	if sysvals.suspendmode == 'command':
@@ -3013,9 +3221,11 @@ def parseTraceLog(live=False):
 				name, pid = key
 				if name not in sysvals.tracefuncs:
 					continue
+				if pid not in data.devpids:
+					data.devpids.append(pid)
 				for e in tp.ktemp[key]:
 					kb, ke = e['begin'], e['end']
-					if kb == ke or tlb > kb or tle <= kb:
+					if ke - kb < 0.000001 or tlb > kb or tle <= kb:
 						continue
 					color = sysvals.kprobeColor(name)
 					data.newActionGlobal(e['name'], kb, ke, pid, color)
@@ -3027,7 +3237,7 @@ def parseTraceLog(live=False):
 						continue
 					for e in tp.ktemp[key]:
 						kb, ke = e['begin'], e['end']
-						if kb == ke or tlb > kb or tle <= kb:
+						if ke - kb < 0.000001 or tlb > kb or tle <= kb:
 							continue
 						data.addDeviceFunctionCall(e['name'], name, e['proc'], pid, kb,
 							ke, e['cdata'], e['rdata'])
@@ -3051,7 +3261,7 @@ def parseTraceLog(live=False):
 					if not devname:
 						sortkey = '%f%f%d' % (cg.start, cg.end, pid)
 						sortlist[sortkey] = cg
-					elif len(cg.list) > 1000000:
+					elif len(cg.list) > 1000000 and cg.name != sysvals.ftopfunc:
 						sysvals.vprint('WARNING: the callgraph for %s is massive (%d lines)' %\
 							(devname, len(cg.list)))
 			# create blocks for orphan cg data
@@ -3133,25 +3343,7 @@ def loadKernelLog():
 		idx = line.find('[')
 		if idx > 1:
 			line = line[idx:]
-		# grab the stamp and sysinfo
-		if re.match(tp.stampfmt, line):
-			tp.stamp = line
-			continue
-		elif re.match(tp.sysinfofmt, line):
-			tp.sysinfo = line
-			continue
-		elif re.match(tp.cmdlinefmt, line):
-			tp.cmdline = line
-			continue
-		elif re.match(tp.batteryfmt, line):
-			tp.battery.append(line)
-			continue
-		elif re.match(tp.testerrfmt, line):
-			tp.testerror.append(line)
-			continue
-		m = re.match(tp.firmwarefmt, line)
-		if(m):
-			tp.fwdata.append((int(m.group('s')), int(m.group('r'))))
+		if tp.stampInfo(line):
 			continue
 		m = re.match('[ \t]*(\[ *)(?P<ktime>[0-9\.]*)(\]) (?P<msg>.*)', line)
 		if(not m):
@@ -3176,7 +3368,7 @@ def loadKernelLog():
 	if data:
 		testruns.append(data)
 	if len(testruns) < 1:
-		pprint('ERROR: dmesg log has no suspend/resume data: %s' \
+		doError('dmesg log has no suspend/resume data: %s' \
 			% sysvals.dmesgfile)
 
 	# fix lines with same timestamp/function with the call and return swapped
@@ -3515,6 +3707,8 @@ def addCallgraphs(sv, hf, data):
 				name += ' '+p
 			if('ftrace' in dev):
 				cg = dev['ftrace']
+				if cg.name == sv.ftopfunc:
+					name = 'top level suspend/resume call'
 				num = callgraphHTML(sv, hf, num, cg,
 					name, color, dev['id'])
 			if('ftraces' in dev):
@@ -3523,22 +3717,16 @@ def addCallgraphs(sv, hf, data):
 						name+' &rarr; '+cg.name, color, dev['id'])
 	hf.write('\n\n    </section>\n')
 
-# Function: createHTMLSummarySimple
-# Description:
-#	 Create summary html file for a series of tests
-# Arguments:
-#	 testruns: array of Data objects from parseTraceLog
-def createHTMLSummarySimple(testruns, htmlfile, title):
-	# write the html header first (html head, css code, up to body start)
-	html = '<!DOCTYPE html>\n<html>\n<head>\n\
+def summaryCSS(title, center=True):
+	tdcenter = 'text-align:center;' if center else ''
+	out = '<!DOCTYPE html>\n<html>\n<head>\n\
 	<meta http-equiv="content-type" content="text/html; charset=UTF-8">\n\
-	<title>SleepGraph Summary</title>\n\
+	<title>'+title+'</title>\n\
 	<style type=\'text/css\'>\n\
 		.stamp {width: 100%;text-align:center;background:#888;line-height:30px;color:white;font: 25px Arial;}\n\
-		table {width:100%;border-collapse: collapse;}\n\
-		.summary {border:1px solid;}\n\
+		table {width:100%;border-collapse: collapse;border:1px solid;}\n\
 		th {border: 1px solid black;background:#222;color:white;}\n\
-		td {font: 14px "Times New Roman";text-align: center;}\n\
+		td {font: 14px "Times New Roman";'+tdcenter+'}\n\
 		tr.head td {border: 1px solid black;background:#aaa;}\n\
 		tr.alt {background-color:#ddd;}\n\
 		tr.notice {color:red;}\n\
@@ -3547,12 +3735,23 @@ def createHTMLSummarySimple(testruns, htmlfile, title):
 		.maxval {background-color:#FFBBBB;}\n\
 		.head a {color:#000;text-decoration: none;}\n\
 	</style>\n</head>\n<body>\n'
+	return out
+
+# Function: createHTMLSummarySimple
+# Description:
+#	 Create summary html file for a series of tests
+# Arguments:
+#	 testruns: array of Data objects from parseTraceLog
+def createHTMLSummarySimple(testruns, htmlfile, title):
+	# write the html header first (html head, css code, up to body start)
+	html = summaryCSS('Summary - SleepGraph')
 
 	# extract the test data into list
 	list = dict()
-	tAvg, tMin, tMax, tMed = [0.0, 0.0], [0.0, 0.0], [0.0, 0.0], [[], []]
+	tAvg, tMin, tMax, tMed = [0.0, 0.0], [0.0, 0.0], [0.0, 0.0], [dict(), dict()]
 	iMin, iMed, iMax = [0, 0], [0, 0], [0, 0]
 	num = 0
+	useturbo = False
 	lastmode = ''
 	cnt = dict()
 	for data in sorted(testruns, key=lambda v:(v['mode'], v['host'], v['kernel'], v['time'])):
@@ -3563,27 +3762,35 @@ def createHTMLSummarySimple(testruns, htmlfile, title):
 			for i in range(2):
 				s = sorted(tMed[i])
 				list[lastmode]['med'][i] = s[int(len(s)/2)]
-				iMed[i] = tMed[i].index(list[lastmode]['med'][i])
+				iMed[i] = tMed[i][list[lastmode]['med'][i]]
 			list[lastmode]['avg'] = [tAvg[0] / num, tAvg[1] / num]
 			list[lastmode]['min'] = tMin
 			list[lastmode]['max'] = tMax
 			list[lastmode]['idx'] = (iMin, iMed, iMax)
-			tAvg, tMin, tMax, tMed = [0.0, 0.0], [0.0, 0.0], [0.0, 0.0], [[], []]
+			tAvg, tMin, tMax, tMed = [0.0, 0.0], [0.0, 0.0], [0.0, 0.0], [dict(), dict()]
 			iMin, iMed, iMax = [0, 0], [0, 0], [0, 0]
 			num = 0
+		pkgpc10 = syslpi = ''
+		if 'pkgpc10' in data and 'syslpi' in data:
+			pkgpc10 = data['pkgpc10']
+			syslpi = data['syslpi']
+			useturbo = True
+		res = data['result']
 		tVal = [float(data['suspend']), float(data['resume'])]
 		list[mode]['data'].append([data['host'], data['kernel'],
-			data['time'], tVal[0], tVal[1], data['url'], data['result'],
+			data['time'], tVal[0], tVal[1], data['url'], res,
 			data['issues'], data['sus_worst'], data['sus_worsttime'],
-			data['res_worst'], data['res_worsttime']])
+			data['res_worst'], data['res_worsttime'], pkgpc10, syslpi])
 		idx = len(list[mode]['data']) - 1
-		if data['result'] not in cnt:
-			cnt[data['result']] = 1
+		if res.startswith('fail in'):
+			res = 'fail'
+		if res not in cnt:
+			cnt[res] = 1
 		else:
-			cnt[data['result']] += 1
-		if data['result'] == 'pass':
+			cnt[res] += 1
+		if res == 'pass':
 			for i in range(2):
-				tMed[i].append(tVal[i])
+				tMed[i][tVal[i]] = idx
 				tAvg[i] += tVal[i]
 				if tMin[i] == 0 or tVal[i] < tMin[i]:
 					iMin[i] = idx
@@ -3597,7 +3804,7 @@ def createHTMLSummarySimple(testruns, htmlfile, title):
 		for i in range(2):
 			s = sorted(tMed[i])
 			list[lastmode]['med'][i] = s[int(len(s)/2)]
-			iMed[i] = tMed[i].index(list[lastmode]['med'][i])
+			iMed[i] = tMed[i][list[lastmode]['med'][i]]
 		list[lastmode]['avg'] = [tAvg[0] / num, tAvg[1] / num]
 		list[lastmode]['min'] = tMin
 		list[lastmode]['max'] = tMax
@@ -3613,19 +3820,21 @@ def createHTMLSummarySimple(testruns, htmlfile, title):
 	td = '\t<td>{0}</td>\n'
 	tdh = '\t<td{1}>{0}</td>\n'
 	tdlink = '\t<td><a href="{0}">html</a></td>\n'
+	colspan = '14' if useturbo else '12'
 
 	# table header
-	html += '<table class="summary">\n<tr>\n' + th.format('#') +\
+	html += '<table>\n<tr>\n' + th.format('#') +\
 		th.format('Mode') + th.format('Host') + th.format('Kernel') +\
 		th.format('Test Time') + th.format('Result') + th.format('Issues') +\
 		th.format('Suspend') + th.format('Resume') +\
 		th.format('Worst Suspend Device') + th.format('SD Time') +\
-		th.format('Worst Resume Device') + th.format('RD Time') +\
-		th.format('Detail') + '</tr>\n'
-
+		th.format('Worst Resume Device') + th.format('RD Time')
+	if useturbo:
+		html += th.format('PkgPC10') + th.format('SysLPI')
+	html += th.format('Detail')+'</tr>\n'
 	# export list into html
 	head = '<tr class="head"><td>{0}</td><td>{1}</td>'+\
-		'<td colspan=12 class="sus">Suspend Avg={2} '+\
+		'<td colspan='+colspan+' class="sus">Suspend Avg={2} '+\
 		'<span class=minval><a href="#s{10}min">Min={3}</a></span> '+\
 		'<span class=medval><a href="#s{10}med">Med={4}</a></span> '+\
 		'<span class=maxval><a href="#s{10}max">Max={5}</a></span> '+\
@@ -3634,7 +3843,8 @@ def createHTMLSummarySimple(testruns, htmlfile, title):
 		'<span class=medval><a href="#r{10}med">Med={8}</a></span> '+\
 		'<span class=maxval><a href="#r{10}max">Max={9}</a></span></td>'+\
 		'</tr>\n'
-	headnone = '<tr class="head"><td>{0}</td><td>{1}</td><td colspan=12></td></tr>\n'
+	headnone = '<tr class="head"><td>{0}</td><td>{1}</td><td colspan='+\
+		colspan+'></td></tr>\n'
 	for mode in list:
 		# header line for each suspend mode
 		num = 0
@@ -3681,6 +3891,9 @@ def createHTMLSummarySimple(testruns, htmlfile, title):
 			html += td.format('%.3f ms' % d[9])	if d[9] else td.format('')		# sus_worst time
 			html += td.format(d[10])									# res_worst
 			html += td.format('%.3f ms' % d[11]) if d[11] else td.format('')	# res_worst time
+			if useturbo:
+				html += td.format(d[12])								# pkg_pc10
+				html += td.format(d[13])								# syslpi
 			html += tdlink.format(d[5]) if d[5] else td.format('')		# url
 			html += '</tr>\n'
 			num += 1
@@ -3690,6 +3903,115 @@ def createHTMLSummarySimple(testruns, htmlfile, title):
 	hf.write(html+'</table>\n</body>\n</html>\n')
 	hf.close()
 
+def createHTMLDeviceSummary(testruns, htmlfile, title):
+	html = summaryCSS('Device Summary - SleepGraph', False)
+
+	# create global device list from all tests
+	devall = dict()
+	for data in testruns:
+		host, url, devlist = data['host'], data['url'], data['devlist']
+		for type in devlist:
+			if type not in devall:
+				devall[type] = dict()
+			mdevlist, devlist = devall[type], data['devlist'][type]
+			for name in devlist:
+				length = devlist[name]
+				if name not in mdevlist:
+					mdevlist[name] = {'name': name, 'host': host,
+						'worst': length, 'total': length, 'count': 1,
+						'url': url}
+				else:
+					if length > mdevlist[name]['worst']:
+						mdevlist[name]['worst'] = length
+						mdevlist[name]['url'] = url
+						mdevlist[name]['host'] = host
+					mdevlist[name]['total'] += length
+					mdevlist[name]['count'] += 1
+
+	# generate the html
+	th = '\t<th>{0}</th>\n'
+	td = '\t<td align=center>{0}</td>\n'
+	tdr = '\t<td align=right>{0}</td>\n'
+	tdlink = '\t<td align=center><a href="{0}">html</a></td>\n'
+	limit = 1
+	for type in sorted(devall, reverse=True):
+		num = 0
+		devlist = devall[type]
+		# table header
+		html += '<div class="stamp">%s (%s devices > %d ms)</div><table>\n' % \
+			(title, type.upper(), limit)
+		html += '<tr>\n' + '<th align=right>Device Name</th>' +\
+			th.format('Average Time') + th.format('Count') +\
+			th.format('Worst Time') + th.format('Host (worst time)') +\
+			th.format('Link (worst time)') + '</tr>\n'
+		for name in sorted(devlist, key=lambda k:devlist[k]['worst'], reverse=True):
+			data = devall[type][name]
+			data['average'] = data['total'] / data['count']
+			if data['average'] < limit:
+				continue
+			# row classes - alternate row color
+			rcls = ['alt'] if num % 2 == 1 else []
+			html += '<tr class="'+(' '.join(rcls))+'">\n' if len(rcls) > 0 else '<tr>\n'
+			html += tdr.format(data['name'])				# name
+			html += td.format('%.3f ms' % data['average'])	# average
+			html += td.format(data['count'])				# count
+			html += td.format('%.3f ms' % data['worst'])	# worst
+			html += td.format(data['host'])					# host
+			html += tdlink.format(data['url'])				# url
+			html += '</tr>\n'
+			num += 1
+		html += '</table>\n'
+
+	# flush the data to file
+	hf = open(htmlfile, 'w')
+	hf.write(html+'</body>\n</html>\n')
+	hf.close()
+	return devall
+
+def createHTMLIssuesSummary(testruns, issues, htmlfile, title, extra=''):
+	multihost = len([e for e in issues if len(e['urls']) > 1]) > 0
+	html = summaryCSS('Issues Summary - SleepGraph', False)
+	total = len(testruns)
+
+	# generate the html
+	th = '\t<th>{0}</th>\n'
+	td = '\t<td align={0}>{1}</td>\n'
+	tdlink = '<a href="{1}">{0}</a>'
+	subtitle = '%d issues' % len(issues) if len(issues) > 0 else 'no issues'
+	html += '<div class="stamp">%s (%s)</div><table>\n' % (title, subtitle)
+	html += '<tr>\n' + th.format('Issue') + th.format('Count')
+	if multihost:
+		html += th.format('Hosts')
+	html += th.format('Tests') + th.format('Fail Rate') +\
+		th.format('First Instance') + '</tr>\n'
+
+	num = 0
+	for e in sorted(issues, key=lambda v:v['count'], reverse=True):
+		testtotal = 0
+		links = []
+		for host in sorted(e['urls']):
+			links.append(tdlink.format(host, e['urls'][host][0]))
+			testtotal += len(e['urls'][host])
+		rate = '%d/%d (%.2f%%)' % (testtotal, total, 100*float(testtotal)/float(total))
+		# row classes - alternate row color
+		rcls = ['alt'] if num % 2 == 1 else []
+		html += '<tr class="'+(' '.join(rcls))+'">\n' if len(rcls) > 0 else '<tr>\n'
+		html += td.format('left', e['line'])		# issue
+		html += td.format('center', e['count'])		# count
+		if multihost:
+			html += td.format('center', len(e['urls']))	# hosts
+		html += td.format('center', testtotal)		# test count
+		html += td.format('center', rate)			# test rate
+		html += td.format('center nowrap', '<br>'.join(links))	# links
+		html += '</tr>\n'
+		num += 1
+
+	# flush the data to file
+	hf = open(htmlfile, 'w')
+	hf.write(html+'</table>\n'+extra+'</body>\n</html>\n')
+	hf.close()
+	return issues
+
 def ordinal(value):
 	suffix = 'th'
 	if value < 10 or value > 19:
@@ -3991,7 +4313,7 @@ def createHTML(testruns, testfail):
 			for word in phase.split('_'):
 				id += word[0]
 			order = '%.2f' % ((p['order'] * pdelta) + pmargin)
-			name = string.replace(phase, '_', ' &nbsp;')
+			name = phase.replace('_', ' &nbsp;')
 			devtl.html += devtl.html_legend.format(order, p['color'], name, id)
 		devtl.html += '</div>\n'
 
@@ -4580,6 +4902,7 @@ def setRuntimeSuspend(before=True):
 def executeSuspend():
 	pm = ProcessMonitor()
 	tp = sysvals.tpath
+	wifi = sysvals.checkWifi()
 	testdata = []
 	battery = True if getBattery() else False
 	# run these commands to prepare the system for suspend
@@ -4613,6 +4936,7 @@ def executeSuspend():
 				pprint('SUSPEND START')
 			else:
 				pprint('SUSPEND START (press a key to resume)')
+		sysvals.mcelog(True)
 		bat1 = getBattery() if battery else False
 		# set rtcwake
 		if(sysvals.rtcwake):
@@ -4644,13 +4968,23 @@ def executeSuspend():
 				pf = open(sysvals.diskpowerfile, 'w')
 				pf.write(sysvals.diskmode)
 				pf.close()
-			pf = open(sysvals.powerfile, 'w')
-			pf.write(mode)
-			# execution will pause here
-			try:
-				pf.close()
-			except Exception as e:
-				tdata['error'] = str(e)
+			if mode == 'freeze' and sysvals.haveTurbostat():
+				# execution will pause here
+				turbo = sysvals.turbostat()
+				if '|' in turbo:
+					tdata['turbo'] = turbo
+				else:
+					tdata['error'] = turbo
+			else:
+				if sysvals.haveTurbostat():
+					sysvals.vprint('WARNING: ignoring turbostat in mode "%s"' % mode)
+				pf = open(sysvals.powerfile, 'w')
+				pf.write(mode)
+				# execution will pause here
+				try:
+					pf.close()
+				except Exception as e:
+					tdata['error'] = str(e)
 		if(sysvals.rtcwake):
 			sysvals.rtcWakeAlarmOff()
 		# postdelay delay
@@ -4664,9 +4998,14 @@ def executeSuspend():
 			sysvals.fsetVal('RESUME COMPLETE', 'trace_marker')
 		if(sysvals.suspendmode == 'mem' or sysvals.suspendmode == 'command'):
 			tdata['fw'] = getFPDT(False)
+		mcelog = sysvals.mcelog()
+		if mcelog:
+			tdata['mcelog'] = mcelog
 		bat2 = getBattery() if battery else False
 		if battery and bat1 and bat2:
 			tdata['bat'] = (bat1, bat2)
+		if 'device' in wifi and 'ip' in wifi:
+			tdata['wifi'] = (wifi, sysvals.checkWifi())
 		testdata.append(tdata)
 	# stop ftrace
 	if(sysvals.usecallgraph or sysvals.usetraceevents):
@@ -4686,6 +5025,7 @@ def executeSuspend():
 		op.close()
 		sysvals.fsetVal('', 'trace')
 		devProps()
+	return testdata
 
 def readFile(file):
 	if os.path.islink(file):
@@ -4772,7 +5112,7 @@ def deviceInfo(output=''):
 			ms2nice(power['runtime_active_time']), \
 			ms2nice(power['runtime_suspended_time']))
 	for i in sorted(lines):
-		print lines[i]
+		print(lines[i])
 	return res
 
 # Function: devProps
@@ -4905,12 +5245,12 @@ def getModes():
 	modes = []
 	if(os.path.exists(sysvals.powerfile)):
 		fp = open(sysvals.powerfile, 'r')
-		modes = string.split(fp.read())
+		modes = fp.read().split()
 		fp.close()
 	if(os.path.exists(sysvals.mempowerfile)):
 		deep = False
 		fp = open(sysvals.mempowerfile, 'r')
-		for m in string.split(fp.read()):
+		for m in fp.read().split():
 			memmode = m.strip('[]')
 			if memmode == 'deep':
 				deep = True
@@ -4921,7 +5261,7 @@ def getModes():
 			modes.remove('mem')
 	if('disk' in modes and os.path.exists(sysvals.diskpowerfile)):
 		fp = open(sysvals.diskpowerfile, 'r')
-		for m in string.split(fp.read()):
+		for m in fp.read().split():
 			modes.append('disk-%s' % m.strip('[]'))
 		fp.close()
 	return modes
@@ -4984,14 +5324,15 @@ def dmidecode(mempath, fatal=False):
 				continue
 
 	# read in the memory for scanning
-	fp = open(mempath, 'rb')
 	try:
+		fp = open(mempath, 'rb')
 		fp.seek(memaddr)
 		buf = fp.read(memsize)
 	except:
 		if(fatal):
 			doError('DMI table is unreachable, sorry')
 		else:
+			pprint('WARNING: /dev/mem is not readable, ignoring DMI data')
 			return out
 	fp.close()
 
@@ -5014,14 +5355,15 @@ def dmidecode(mempath, fatal=False):
 			return out
 
 	# read in the SM or DMI table
-	fp = open(mempath, 'rb')
 	try:
+		fp = open(mempath, 'rb')
 		fp.seek(base)
 		buf = fp.read(length)
 	except:
 		if(fatal):
 			doError('DMI table is unreachable, sorry')
 		else:
+			pprint('WARNING: /dev/mem is not readable, ignoring DMI data')
 			return out
 	fp.close()
 
@@ -5165,7 +5507,11 @@ def getFPDT(output):
 	i = 0
 	fwData = [0, 0]
 	records = buf[36:]
-	fp = open(sysvals.mempath, 'rb')
+	try:
+		fp = open(sysvals.mempath, 'rb')
+	except:
+		pprint('WARNING: /dev/mem is not readable, ignoring the FPDT data')
+		return False
 	while(i < len(records)):
 		header = struct.unpack('HBB', records[i:i+4])
 		if(header[0] not in rectype):
@@ -5282,13 +5628,14 @@ def statusCheck(probecheck=False):
 	pprint('    is ftrace supported: %s' % res)
 
 	# check if kprobes are available
-	res = sysvals.colorText('NO')
-	sysvals.usekprobes = sysvals.verifyKprobes()
-	if(sysvals.usekprobes):
-		res = 'YES'
-	else:
-		sysvals.usedevsrc = False
-	pprint('    are kprobes supported: %s' % res)
+	if sysvals.usekprobes:
+		res = sysvals.colorText('NO')
+		sysvals.usekprobes = sysvals.verifyKprobes()
+		if(sysvals.usekprobes):
+			res = 'YES'
+		else:
+			sysvals.usedevsrc = False
+		pprint('    are kprobes supported: %s' % res)
 
 	# what data source are we using
 	res = 'DMESG'
@@ -5376,6 +5723,8 @@ def getArgFloat(name, args, min, max, main=True):
 
 def processData(live=False):
 	pprint('PROCESSING DATA')
+	sysvals.vprint('usetraceevents=%s, usetracemarkers=%s, usekprobes=%s' % \
+		(sysvals.usetraceevents, sysvals.usetracemarkers, sysvals.usekprobes))
 	error = ''
 	if(sysvals.usetraceevents):
 		testruns, error = parseTraceLog(live)
@@ -5388,13 +5737,36 @@ def processData(live=False):
 			parseKernelLog(data)
 		if(sysvals.ftracefile and (sysvals.usecallgraph or sysvals.usetraceevents)):
 			appendIncompleteTraceLog(testruns)
+	sysvals.vprint('System Info:')
+	for key in sorted(sysvals.stamp):
+		sysvals.vprint('    %-8s : %s' % (key.upper(), sysvals.stamp[key]))
+	if sysvals.kparams:
+		sysvals.vprint('Kparams:\n    %s' % sysvals.kparams)
 	sysvals.vprint('Command:\n    %s' % sysvals.cmdline)
 	for data in testruns:
+		if data.mcelog:
+			sysvals.vprint('MCELOG Data:')
+			for line in data.mcelog.split('\n'):
+				sysvals.vprint('    %s' % line)
+		if data.turbostat:
+			idx, s = 0, 'Turbostat:\n    '
+			for val in data.turbostat.split('|'):
+				idx += len(val) + 1
+				if idx >= 80:
+					idx = 0
+					s += '\n    '
+				s += val + ' '
+			sysvals.vprint(s)
 		if data.battery:
 			a1, c1, a2, c2 = data.battery
 			s = 'Battery:\n    Before - AC: %s, Charge: %d\n     After - AC: %s, Charge: %d' % \
 				(a1, int(c1), a2, int(c2))
 			sysvals.vprint(s)
+		if data.wifi:
+			w = data.wifi.replace('|', ' ').split(',')
+			s = 'Wifi:\n    Before %s\n     After %s' % \
+				(w[0], w[1])
+			sysvals.vprint(s)
 		data.printDetails()
 	if sysvals.cgdump:
 		for data in testruns:
@@ -5418,12 +5790,15 @@ def processData(live=False):
 # Function: rerunTest
 # Description:
 #	 generate an output from an existing set of ftrace/dmesg logs
-def rerunTest():
+def rerunTest(htmlfile=''):
 	if sysvals.ftracefile:
 		doesTraceLogHaveTraceEvents()
 	if not sysvals.dmesgfile and not sysvals.usetraceevents:
 		doError('recreating this html output requires a dmesg file')
-	sysvals.setOutputFile()
+	if htmlfile:
+		sysvals.htmlfile = htmlfile
+	else:
+		sysvals.setOutputFile()
 	if os.path.exists(sysvals.htmlfile):
 		if not os.path.isfile(sysvals.htmlfile):
 			doError('a directory already exists with this name: %s' % sysvals.htmlfile)
@@ -5442,14 +5817,18 @@ def runTest(n=0):
 	sysvals.initTestOutput('suspend')
 
 	# execute the test
-	executeSuspend()
+	testdata = executeSuspend()
 	sysvals.cleanupFtrace()
 	if sysvals.skiphtml:
 		sysvals.sudoUserchown(sysvals.testdir)
 		return
-	testruns, stamp = processData(True)
-	for data in testruns:
-		del data
+	if not testdata[0]['error']:
+		testruns, stamp = processData(True)
+		for data in testruns:
+			del data
+	else:
+		stamp = testdata[0]
+
 	sysvals.sudoUserchown(sysvals.testdir)
 	sysvals.outputResult(stamp, n)
 	if 'error' in stamp:
@@ -5479,10 +5858,13 @@ def find_in_html(html, start, end, firstonly=True):
 		return ''
 	return out
 
-def data_from_html(file, outpath, devlist=False):
+def data_from_html(file, outpath, issues, fulldetail=False):
 	html = open(file, 'r').read()
+	sysvals.htmlfile = os.path.relpath(file, outpath)
+	# extract general info
 	suspend = find_in_html(html, 'Kernel Suspend', 'ms')
 	resume = find_in_html(html, 'Kernel Resume', 'ms')
+	sysinfo = find_in_html(html, '<div class="stamp sysinfo">', '</div>')
 	line = find_in_html(html, '<div class="stamp">', '</div>')
 	stmp = line.split()
 	if not suspend or not resume or len(stmp) != 8:
@@ -5491,6 +5873,7 @@ def data_from_html(file, outpath, devlist=False):
 		dt = datetime.strptime(' '.join(stmp[3:]), '%B %d %Y, %I:%M:%S %p')
 	except:
 		return False
+	sysvals.hostname = stmp[0]
 	tstr = dt.strftime('%Y/%m/%d %H:%M:%S')
 	error = find_in_html(html, '<table class="testfail"><tr><td>', '</td>')
 	if error:
@@ -5501,13 +5884,45 @@ def data_from_html(file, outpath, devlist=False):
 			result = 'fail'
 	else:
 		result = 'pass'
+	# extract error info
 	ilist = []
-	e = find_in_html(html, 'class="err"[\w=":;\.%\- ]*>', '&rarr;</div>', False)
-	for i in list(set(e)):
-		ilist.append('%sx%d' % (i, e.count(i)) if e.count(i) > 1 else i)
+	extra = dict()
+	log = find_in_html(html, '<div id="dmesglog" style="display:none;">',
+		'</div>').strip()
+	if log:
+		d = Data(0)
+		d.end = 999999999
+		d.dmesgtext = log.split('\n')
+		msglist = d.extractErrorInfo()
+		for msg in msglist:
+			sysvals.errorSummary(issues, msg)
+		if stmp[2] == 'freeze':
+			extra = d.turbostatInfo()
+		elist = dict()
+		for dir in d.errorinfo:
+			for err in d.errorinfo[dir]:
+				if err[0] not in elist:
+					elist[err[0]] = 0
+				elist[err[0]] += 1
+		for i in elist:
+			ilist.append('%sx%d' % (i, elist[i]) if elist[i] > 1 else i)
 	low = find_in_html(html, 'freeze time: <b>', ' ms</b>')
 	if low and '|' in low:
-		ilist.append('FREEZEx%d' % len(low.split('|')))
+		issue = 'FREEZEx%d' % len(low.split('|'))
+		match = [i for i in issues if i['match'] == issue]
+		if len(match) > 0:
+			match[0]['count'] += 1
+			if sysvals.hostname not in match[0]['urls']:
+				match[0]['urls'][sysvals.hostname] = [sysvals.htmlfile]
+			elif sysvals.htmlfile not in match[0]['urls'][sysvals.hostname]:
+				match[0]['urls'][sysvals.hostname].append(sysvals.htmlfile)
+		else:
+			issues.append({
+				'match': issue, 'count': 1, 'line': issue,
+				'urls': {sysvals.hostname: [sysvals.htmlfile]},
+			})
+		ilist.append(issue)
+	# extract device info
 	devices = dict()
 	for line in html.split('\n'):
 		m = re.match(' *<div id=\"[a,0-9]*\" *title=\"(?P<title>.*)\" class=\"thread.*', line)
@@ -5519,82 +5934,98 @@ def data_from_html(file, outpath, devlist=False):
 		name, time, phase = m.group('n'), m.group('t'), m.group('p')
 		if ' async' in name or ' sync' in name:
 			name = ' '.join(name.split(' ')[:-1])
-		d = phase.split('_')[0]
+		if phase.startswith('suspend'):
+			d = 'suspend'
+		elif phase.startswith('resume'):
+			d = 'resume'
+		else:
+			continue
 		if d not in devices:
 			devices[d] = dict()
 		if name not in devices[d]:
 			devices[d][name] = 0.0
 		devices[d][name] += float(time)
-	worst  = {'suspend': {'name':'', 'time': 0.0},
-		'resume': {'name':'', 'time': 0.0}}
-	for d in devices:
-		if d not in worst:
-			worst[d] = dict()
-		dev = devices[d]
-		if len(dev.keys()) > 0:
+	# create worst device info
+	worst = dict()
+	for d in ['suspend', 'resume']:
+		worst[d] = {'name':'', 'time': 0.0}
+		dev = devices[d] if d in devices else 0
+		if dev and len(dev.keys()) > 0:
 			n = sorted(dev, key=dev.get, reverse=True)[0]
 			worst[d]['name'], worst[d]['time'] = n, dev[n]
 	data = {
 		'mode': stmp[2],
 		'host': stmp[0],
 		'kernel': stmp[1],
+		'sysinfo': sysinfo,
 		'time': tstr,
 		'result': result,
 		'issues': ' '.join(ilist),
 		'suspend': suspend,
 		'resume': resume,
+		'devlist': devices,
 		'sus_worst': worst['suspend']['name'],
 		'sus_worsttime': worst['suspend']['time'],
 		'res_worst': worst['resume']['name'],
 		'res_worsttime': worst['resume']['time'],
-		'url': os.path.relpath(file, outpath),
+		'url': sysvals.htmlfile,
 	}
-	if devlist:
-		data['devlist'] = devices
+	for key in extra:
+		data[key] = extra[key]
+	if fulldetail:
+		data['funclist'] = find_in_html(html, '<div title="', '" class="traceevent"', False)
 	return data
 
+def genHtml(subdir):
+	for dirname, dirnames, filenames in os.walk(subdir):
+		sysvals.dmesgfile = sysvals.ftracefile = sysvals.htmlfile = ''
+		for filename in filenames:
+			if(re.match('.*_dmesg.txt', filename)):
+				sysvals.dmesgfile = os.path.join(dirname, filename)
+			elif(re.match('.*_ftrace.txt', filename)):
+				sysvals.ftracefile = os.path.join(dirname, filename)
+		sysvals.setOutputFile()
+		if sysvals.ftracefile and sysvals.htmlfile and \
+			not os.path.exists(sysvals.htmlfile):
+			pprint('FTRACE: %s' % sysvals.ftracefile)
+			if sysvals.dmesgfile:
+				pprint('DMESG : %s' % sysvals.dmesgfile)
+			rerunTest()
+
 # Function: runSummary
 # Description:
 #	 create a summary of tests in a sub-directory
 def runSummary(subdir, local=True, genhtml=False):
 	inpath = os.path.abspath(subdir)
 	outpath = os.path.abspath('.') if local else inpath
-	pprint('Generating a summary of folder "%s"' % inpath)
+	pprint('Generating a summary of folder:\n   %s' % inpath)
 	if genhtml:
-		for dirname, dirnames, filenames in os.walk(subdir):
-			sysvals.dmesgfile = sysvals.ftracefile = sysvals.htmlfile = ''
-			for filename in filenames:
-				if(re.match('.*_dmesg.txt', filename)):
-					sysvals.dmesgfile = os.path.join(dirname, filename)
-				elif(re.match('.*_ftrace.txt', filename)):
-					sysvals.ftracefile = os.path.join(dirname, filename)
-			sysvals.setOutputFile()
-			if sysvals.ftracefile and sysvals.htmlfile and \
-				not os.path.exists(sysvals.htmlfile):
-				pprint('FTRACE: %s' % sysvals.ftracefile)
-				if sysvals.dmesgfile:
-					pprint('DMESG : %s' % sysvals.dmesgfile)
-				rerunTest()
+		genHtml(subdir)
+	issues = []
 	testruns = []
 	desc = {'host':[],'mode':[],'kernel':[]}
 	for dirname, dirnames, filenames in os.walk(subdir):
 		for filename in filenames:
 			if(not re.match('.*.html', filename)):
 				continue
-			data = data_from_html(os.path.join(dirname, filename), outpath)
+			data = data_from_html(os.path.join(dirname, filename), outpath, issues)
 			if(not data):
 				continue
 			testruns.append(data)
 			for key in desc:
 				if data[key] not in desc[key]:
 					desc[key].append(data[key])
-	outfile = os.path.join(outpath, 'summary.html')
-	pprint('Summary file: %s' % outfile)
+	pprint('Summary files:')
 	if len(desc['host']) == len(desc['mode']) == len(desc['kernel']) == 1:
 		title = '%s %s %s' % (desc['host'][0], desc['kernel'][0], desc['mode'][0])
 	else:
 		title = inpath
-	createHTMLSummarySimple(testruns, outfile, title)
+	createHTMLSummarySimple(testruns, os.path.join(outpath, 'summary.html'), title)
+	pprint('   summary.html         - tabular list of test data found')
+	createHTMLDeviceSummary(testruns, os.path.join(outpath, 'summary-devices.html'), title)
+	pprint('   summary-devices.html - kernel device list sorted by total execution time')
+	createHTMLIssuesSummary(testruns, issues, os.path.join(outpath, 'summary-issues.html'), title)
+	pprint('   summary-issues.html  - kernel issues found sorted by frequency')
 
 # Function: checkArgBool
 # Description:
@@ -5839,6 +6270,7 @@ def printHelp():
 	'                default: suspend-{date}-{time}\n'\
 	'   -rtcwake t   Wakeup t seconds after suspend, set t to "off" to disable (default: 15)\n'\
 	'   -addlogs     Add the dmesg and ftrace logs to the html output\n'\
+	'   -turbostat   Use turbostat to execute the command in freeze mode (default: disabled)\n'\
 	'   -srgap       Add a visible gap in the timeline between sus/res (default: disabled)\n'\
 	'   -skiphtml    Run the test and capture the trace logs, but skip the timeline (default: disabled)\n'\
 	'   -result fn   Export a results table to a text file for parsing.\n'\
@@ -5860,6 +6292,7 @@ def printHelp():
 	'                be created in a new subdirectory with a summary page.\n'\
 	'  [debug]\n'\
 	'   -f           Use ftrace to create device callgraphs (default: disabled)\n'\
+	'   -ftop        Use ftrace on the top level call: "%s" (default: disabled)\n'\
 	'   -maxdepth N  limit the callgraph data to N call levels (default: 0=all)\n'\
 	'   -expandcg    pre-expand the callgraph data in the html output (default: disabled)\n'\
 	'   -fadd file   Add functions to be graphed in the timeline from a list in a text file\n'\
@@ -5879,6 +6312,7 @@ def printHelp():
 	'   -status      Test to see if the system is enabled to run this tool\n'\
 	'   -fpdt        Print out the contents of the ACPI Firmware Performance Data Table\n'\
 	'   -battery     Print out battery info (if available)\n'\
+	'   -wifi        Print out wifi connection info (if wireless-tools and device exists)\n'\
 	'   -x<mode>     Test xset by toggling the given mode (on/off/standby/suspend)\n'\
 	'   -sysinfo     Print out system info extracted from BIOS\n'\
 	'   -devinfo     Print out the pm settings of all devices which support runtime suspend\n'\
@@ -5888,7 +6322,7 @@ def printHelp():
 	'  [redo]\n'\
 	'   -ftrace ftracefile  Create HTML output using ftrace input (used with -dmesg)\n'\
 	'   -dmesg dmesgfile    Create HTML output using dmesg (used with -ftrace)\n'\
-	'' % (sysvals.title, sysvals.version, sysvals.suspendmode))
+	'' % (sysvals.title, sysvals.version, sysvals.suspendmode, sysvals.ftopfunc))
 	return True
 
 # ----------------- MAIN --------------------
@@ -5898,7 +6332,7 @@ if __name__ == '__main__':
 	cmd = ''
 	simplecmds = ['-sysinfo', '-modes', '-fpdt', '-flist', '-flistall',
 		'-devinfo', '-status', '-battery', '-xon', '-xoff', '-xstandby',
-		'-xsuspend', '-xinit', '-xreset', '-xstat']
+		'-xsuspend', '-xinit', '-xreset', '-xstat', '-wifi']
 	if '-f' in sys.argv:
 		sysvals.cgskip = sysvals.configFile('cgskip.txt')
 	# loop through the command line arguments
@@ -5930,6 +6364,10 @@ if __name__ == '__main__':
 			sysvals.postdelay = getArgInt('-postdelay', args, 0, 60000)
 		elif(arg == '-f'):
 			sysvals.usecallgraph = True
+		elif(arg == '-ftop'):
+			sysvals.usecallgraph = True
+			sysvals.ftop = True
+			sysvals.usekprobes = False
 		elif(arg == '-skiphtml'):
 			sysvals.skiphtml = True
 		elif(arg == '-cgdump'):
@@ -5940,10 +6378,16 @@ if __name__ == '__main__':
 			genhtml = True
 		elif(arg == '-addlogs'):
 			sysvals.dmesglog = sysvals.ftracelog = True
+		elif(arg == '-nologs'):
+			sysvals.dmesglog = sysvals.ftracelog = False
 		elif(arg == '-addlogdmesg'):
 			sysvals.dmesglog = True
 		elif(arg == '-addlogftrace'):
 			sysvals.ftracelog = True
+		elif(arg == '-turbostat'):
+			sysvals.tstat = True
+			if not sysvals.haveTurbostat():
+				doError('Turbostat command not found')
 		elif(arg == '-verbose'):
 			sysvals.verbose = True
 		elif(arg == '-proc'):
@@ -6013,6 +6457,12 @@ if __name__ == '__main__':
 			except:
 				doError('No callgraph functions supplied', True)
 			sysvals.setCallgraphFilter(val)
+		elif(arg == '-skipkprobe'):
+			try:
+				val = args.next()
+			except:
+				doError('No kprobe functions supplied', True)
+			sysvals.skipKprobes(val)
 		elif(arg == '-cgskip'):
 			try:
 				val = args.next()
@@ -6151,7 +6601,7 @@ if __name__ == '__main__':
 		elif(cmd == 'devinfo'):
 			deviceInfo()
 		elif(cmd == 'modes'):
-			print getModes()
+			pprint(getModes())
 		elif(cmd == 'flist'):
 			sysvals.getFtraceFilterFunctions(True)
 		elif(cmd == 'flistall'):
@@ -6163,11 +6613,18 @@ if __name__ == '__main__':
 			ret = displayControl(cmd[1:])
 		elif(cmd == 'xstat'):
 			pprint('Display Status: %s' % displayControl('stat').upper())
+		elif(cmd == 'wifi'):
+			out = sysvals.checkWifi()
+			if 'device' not in out:
+				pprint('WIFI interface not found')
+			else:
+				for key in sorted(out):
+					pprint('%6s: %s' % (key.upper(), out[key]))
 		sys.exit(ret)
 
 	# if instructed, re-analyze existing data files
 	if(sysvals.notestrun):
-		stamp = rerunTest()
+		stamp = rerunTest(sysvals.outdir)
 		sysvals.outputResult(stamp)
 		sys.exit(0)
 
@@ -6204,7 +6661,7 @@ if __name__ == '__main__':
 			s = 'suspend-x%d' % sysvals.multitest['count']
 			sysvals.outdir = datetime.now().strftime(s+'-%y%m%d-%H%M%S')
 		if not os.path.isdir(sysvals.outdir):
-			os.mkdir(sysvals.outdir)
+			os.makedirs(sysvals.outdir)
 		for i in range(sysvals.multitest['count']):
 			if(i != 0):
 				pprint('Waiting %d seconds...' % (sysvals.multitest['delay']))