Merge branch 'pm-cpufreq'

* pm-cpufreq:
  cpufreq: Avoid calling cpufreq_verify_current_freq() from handle_update()
  cpufreq: Consolidate cpufreq_update_current_freq() and __cpufreq_get()
  cpufreq: Don't skip frequency validation for has_target() drivers
  cpufreq: Use has_target() instead of !setpolicy
  cpufreq: Remove redundant !setpolicy check
  cpufreq: Move the IS_ENABLED(CPU_THERMAL) macro into a stub
  cpufreq: s5pv210: Don't flood kernel log after cpufreq change
  cpufreq: pcc-cpufreq: Fail initialization if driver cannot be registered
  cpufreq: add driver for Raspberry Pi
  cpufreq: Switch imx7d to imx-cpufreq-dt for speed grading
  cpufreq: imx-cpufreq-dt: Remove global platform match list
  cpufreq: brcmstb-avs-cpufreq: Fix types for voltage/frequency
  cpufreq: brcmstb-avs-cpufreq: Fix initial command check
  cpufreq: armada-37xx: Remove set but not used variable 'freq'
  cpufreq: imx-cpufreq-dt: Fix no OPPs available on unfused parts
  dt-bindings: imx-cpufreq-dt: Document opp-supported-hw usage
  cpufreq: Add imx-cpufreq-dt driver

13 files changed, 327 insertions, 80 deletions

diff --git a/Documentation/devicetree/bindings/cpufreq/imx-cpufreq-dt.txt b/Documentation/devicetree/bindings/cpufreq/imx-cpufreq-dt.txt
new file mode 100644
index 000000000000..87bff5add3f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/imx-cpufreq-dt.txt
@@ -0,0 +1,37 @@
+i.MX CPUFreq-DT OPP bindings
+================================
+
+Certain i.MX SoCs support different OPPs depending on the "market segment" and
+"speed grading" value which are written in fuses. These bits are combined with
+the opp-supported-hw values for each OPP to check if the OPP is allowed.
+
+Required properties:
+--------------------
+
+For each opp entry in 'operating-points-v2' table:
+- opp-supported-hw: Two bitmaps indicating:
+  - Supported speed grade mask
+  - Supported market segment mask
+    0: Consumer
+    1: Extended Consumer
+    2: Industrial
+    3: Automotive
+
+Example:
+--------
+
+opp_table {
+	compatible = "operating-points-v2";
+	opp-1000000000 {
+		opp-hz = /bits/ 64 <1000000000>;
+		/* grade >= 0, consumer only */
+		opp-supported-hw = <0xf>, <0x3>;
+	};
+
+	opp-1300000000 {
+		opp-hz = /bits/ 64 <1300000000>;
+		opp-microvolt = <1000000>;
+		/* grade >= 1, all segments */
+		opp-supported-hw = <0xe>, <0x7>;
+	};
+}
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index f8129edc145e..56c31a78c692 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -93,6 +93,15 @@ config ARM_IMX6Q_CPUFREQ
 
 	  If in doubt, say N.
 
+config ARM_IMX_CPUFREQ_DT
+	tristate "Freescale i.MX8M cpufreq support"
+	depends on ARCH_MXC && CPUFREQ_DT
+	help
+	  This adds cpufreq driver support for Freescale i.MX8M series SoCs,
+	  based on cpufreq-dt.
+
+	  If in doubt, say N.
+
 config ARM_KIRKWOOD_CPUFREQ
 	def_bool MACH_KIRKWOOD
 	help
@@ -133,6 +142,14 @@ config ARM_QCOM_CPUFREQ_HW
 	  The driver implements the cpufreq interface for this HW engine.
 	  Say Y if you want to support CPUFreq HW.
 
+config ARM_RASPBERRYPI_CPUFREQ
+	tristate "Raspberry Pi cpufreq support"
+	depends on CLK_RASPBERRYPI || COMPILE_TEST
+	help
+	  This adds the CPUFreq driver for Raspberry Pi
+
+	  If in doubt, say N.
+
 config ARM_S3C_CPUFREQ
 	bool
 	help
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 689b26c6f949..5a6c70d26c98 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -56,6 +56,7 @@ obj-$(CONFIG_ACPI_CPPC_CPUFREQ)		+= cppc_cpufreq.o
 obj-$(CONFIG_ARCH_DAVINCI)		+= davinci-cpufreq.o
 obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ)	+= highbank-cpufreq.o
 obj-$(CONFIG_ARM_IMX6Q_CPUFREQ)		+= imx6q-cpufreq.o
+obj-$(CONFIG_ARM_IMX_CPUFREQ_DT)	+= imx-cpufreq-dt.o
 obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ)	+= kirkwood-cpufreq.o
 obj-$(CONFIG_ARM_MEDIATEK_CPUFREQ)	+= mediatek-cpufreq.o
 obj-$(CONFIG_MACH_MVEBU_V7)		+= mvebu-cpufreq.o
@@ -64,6 +65,7 @@ obj-$(CONFIG_ARM_PXA2xx_CPUFREQ)	+= pxa2xx-cpufreq.o
 obj-$(CONFIG_PXA3xx)			+= pxa3xx-cpufreq.o
 obj-$(CONFIG_ARM_QCOM_CPUFREQ_HW)	+= qcom-cpufreq-hw.o
 obj-$(CONFIG_ARM_QCOM_CPUFREQ_KRYO)	+= qcom-cpufreq-kryo.o
+obj-$(CONFIG_ARM_RASPBERRYPI_CPUFREQ) 	+= raspberrypi-cpufreq.o
 obj-$(CONFIG_ARM_S3C2410_CPUFREQ)	+= s3c2410-cpufreq.o
 obj-$(CONFIG_ARM_S3C2412_CPUFREQ)	+= s3c2412-cpufreq.o
 obj-$(CONFIG_ARM_S3C2416_CPUFREQ)	+= s3c2416-cpufreq.o
diff --git a/drivers/cpufreq/armada-37xx-cpufreq.c b/drivers/cpufreq/armada-37xx-cpufreq.c
index 0df16eb1eb3c..aa0f06dec959 100644
--- a/drivers/cpufreq/armada-37xx-cpufreq.c
+++ b/drivers/cpufreq/armada-37xx-cpufreq.c
@@ -257,7 +257,7 @@ static void __init armada37xx_cpufreq_avs_configure(struct regmap *base,
 static void __init armada37xx_cpufreq_avs_setup(struct regmap *base,
 						struct armada_37xx_dvfs *dvfs)
 {
-	unsigned int avs_val = 0, freq;
+	unsigned int avs_val = 0;
 	int load_level = 0;
 
 	if (base == NULL)
@@ -275,8 +275,6 @@ static void __init armada37xx_cpufreq_avs_setup(struct regmap *base,
 
 
 	for (load_level = 1; load_level < LOAD_LEVEL_NR; load_level++) {
-		freq = dvfs->cpu_freq_max / dvfs->divider[load_level];
-
 		avs_val = dvfs->avs[load_level];
 		regmap_update_bits(base, ARMADA_37XX_AVS_VSET(load_level-1),
 		    ARMADA_37XX_AVS_VDD_MASK << ARMADA_37XX_AVS_HIGH_VDD_LIMIT |
diff --git a/drivers/cpufreq/brcmstb-avs-cpufreq.c b/drivers/cpufreq/brcmstb-avs-cpufreq.c
index e6f9cbe5835f..77b0e5d0fb13 100644
--- a/drivers/cpufreq/brcmstb-avs-cpufreq.c
+++ b/drivers/cpufreq/brcmstb-avs-cpufreq.c
@@ -384,12 +384,12 @@ static int brcm_avs_set_pstate(struct private_data *priv, unsigned int pstate)
 	return __issue_avs_command(priv, AVS_CMD_SET_PSTATE, true, args);
 }
 
-static unsigned long brcm_avs_get_voltage(void __iomem *base)
+static u32 brcm_avs_get_voltage(void __iomem *base)
 {
 	return readl(base + AVS_MBOX_VOLTAGE1);
 }
 
-static unsigned long brcm_avs_get_frequency(void __iomem *base)
+static u32 brcm_avs_get_frequency(void __iomem *base)
 {
 	return readl(base + AVS_MBOX_FREQUENCY) * 1000;	/* in kHz */
 }
@@ -446,8 +446,8 @@ static bool brcm_avs_is_firmware_loaded(struct private_data *priv)
 	rc = brcm_avs_get_pmap(priv, NULL);
 	magic = readl(priv->base + AVS_MBOX_MAGIC);
 
-	return (magic == AVS_FIRMWARE_MAGIC) && (rc != -ENOTSUPP) &&
-		(rc != -EINVAL);
+	return (magic == AVS_FIRMWARE_MAGIC) && ((rc != -ENOTSUPP) ||
+		(rc != -EINVAL));
 }
 
 static unsigned int brcm_avs_cpufreq_get(unsigned int cpu)
@@ -653,14 +653,14 @@ static ssize_t show_brcm_avs_voltage(struct cpufreq_policy *policy, char *buf)
 {
 	struct private_data *priv = policy->driver_data;
 
-	return sprintf(buf, "0x%08lx\n", brcm_avs_get_voltage(priv->base));
+	return sprintf(buf, "0x%08x\n", brcm_avs_get_voltage(priv->base));
 }
 
 static ssize_t show_brcm_avs_frequency(struct cpufreq_policy *policy, char *buf)
 {
 	struct private_data *priv = policy->driver_data;
 
-	return sprintf(buf, "0x%08lx\n", brcm_avs_get_frequency(priv->base));
+	return sprintf(buf, "0x%08x\n", brcm_avs_get_frequency(priv->base));
 }
 
 cpufreq_freq_attr_ro(brcm_avs_pstate);
diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
index 88e00683eaeb..03dc4244ab00 100644
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -37,7 +37,6 @@ static const struct of_device_id whitelist[] __initconst = {
 	{ .compatible = "fsl,imx27", },
 	{ .compatible = "fsl,imx51", },
 	{ .compatible = "fsl,imx53", },
-	{ .compatible = "fsl,imx7d", },
 
 	{ .compatible = "marvell,berlin", },
 	{ .compatible = "marvell,pxa250", },
@@ -105,6 +104,10 @@ static const struct of_device_id blacklist[] __initconst = {
 	{ .compatible = "calxeda,highbank", },
 	{ .compatible = "calxeda,ecx-2000", },
 
+	{ .compatible = "fsl,imx7d", },
+	{ .compatible = "fsl,imx8mq", },
+	{ .compatible = "fsl,imx8mm", },
+
 	{ .compatible = "marvell,armadaxp", },
 
 	{ .compatible = "mediatek,mt2701", },
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index e84bf0eb7239..0a9f675f2af4 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -356,12 +356,10 @@ static void cpufreq_notify_transition(struct cpufreq_policy *policy,
 		 * which is not equal to what the cpufreq core thinks is
 		 * "old frequency".
 		 */
-		if (!(cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)) {
-			if (policy->cur && (policy->cur != freqs->old)) {
-				pr_debug("Warning: CPU frequency is %u, cpufreq assumed %u kHz\n",
-					 freqs->old, policy->cur);
-				freqs->old = policy->cur;
-			}
+		if (policy->cur && policy->cur != freqs->old) {
+			pr_debug("Warning: CPU frequency is %u, cpufreq assumed %u kHz\n",
+				 freqs->old, policy->cur);
+			freqs->old = policy->cur;
 		}
 
 		srcu_notifier_call_chain(&cpufreq_transition_notifier_list,
@@ -631,7 +629,7 @@ static int cpufreq_parse_policy(char *str_governor,
 }
 
 /**
- * cpufreq_parse_governor - parse a governor string only for !setpolicy
+ * cpufreq_parse_governor - parse a governor string only for has_target()
  */
 static int cpufreq_parse_governor(char *str_governor,
 				  struct cpufreq_policy *policy)
@@ -1114,13 +1112,25 @@ static int cpufreq_add_policy_cpu(struct cpufreq_policy *policy, unsigned int cp
 	return ret;
 }
 
+static void refresh_frequency_limits(struct cpufreq_policy *policy)
+{
+	struct cpufreq_policy new_policy = *policy;
+
+	pr_debug("updating policy for CPU %u\n", policy->cpu);
+
+	new_policy.min = policy->user_policy.min;
+	new_policy.max = policy->user_policy.max;
+
+	cpufreq_set_policy(policy, &new_policy);
+}
+
 static void handle_update(struct work_struct *work)
 {
 	struct cpufreq_policy *policy =
 		container_of(work, struct cpufreq_policy, update);
-	unsigned int cpu = policy->cpu;
-	pr_debug("handle_update for cpu %u called\n", cpu);
-	cpufreq_update_policy(cpu);
+
+	pr_debug("handle_update for cpu %u called\n", policy->cpu);
+	refresh_frequency_limits(policy);
 }
 
 static struct cpufreq_policy *cpufreq_policy_alloc(unsigned int cpu)
@@ -1300,7 +1310,7 @@ static int cpufreq_online(unsigned int cpu)
 		policy->max = policy->user_policy.max;
 	}
 
-	if (cpufreq_driver->get && !cpufreq_driver->setpolicy) {
+	if (cpufreq_driver->get && has_target()) {
 		policy->cur = cpufreq_driver->get(policy->cpu);
 		if (!policy->cur) {
 			pr_err("%s: ->get() failed\n", __func__);
@@ -1375,8 +1385,7 @@ static int cpufreq_online(unsigned int cpu)
 	if (cpufreq_driver->ready)
 		cpufreq_driver->ready(policy);
 
-	if (IS_ENABLED(CONFIG_CPU_THERMAL) &&
-	    cpufreq_driver->flags & CPUFREQ_IS_COOLING_DEV)
+	if (cpufreq_thermal_control_enabled(cpufreq_driver))
 		policy->cdev = of_cpufreq_cooling_register(policy);
 
 	pr_debug("initialization complete\n");
@@ -1466,8 +1475,7 @@ static int cpufreq_offline(unsigned int cpu)
 		goto unlock;
 	}
 
-	if (IS_ENABLED(CONFIG_CPU_THERMAL) &&
-	    cpufreq_driver->flags & CPUFREQ_IS_COOLING_DEV) {
+	if (cpufreq_thermal_control_enabled(cpufreq_driver)) {
 		cpufreq_cooling_unregister(policy->cdev);
 		policy->cdev = NULL;
 	}
@@ -1546,6 +1554,30 @@ static void cpufreq_out_of_sync(struct cpufreq_policy *policy,
 	cpufreq_freq_transition_end(policy, &freqs, 0);
 }
 
+static unsigned int cpufreq_verify_current_freq(struct cpufreq_policy *policy, bool update)
+{
+	unsigned int new_freq;
+
+	new_freq = cpufreq_driver->get(policy->cpu);
+	if (!new_freq)
+		return 0;
+
+	/*
+	 * If fast frequency switching is used with the given policy, the check
+	 * against policy->cur is pointless, so skip it in that case.
+	 */
+	if (policy->fast_switch_enabled || !has_target())
+		return new_freq;
+
+	if (policy->cur != new_freq) {
+		cpufreq_out_of_sync(policy, new_freq);
+		if (update)
+			schedule_work(&policy->update);
+	}
+
+	return new_freq;
+}
+
 /**
  * cpufreq_quick_get - get the CPU frequency (in kHz) from policy->cur
  * @cpu: CPU number
@@ -1601,31 +1633,10 @@ EXPORT_SYMBOL(cpufreq_quick_get_max);
 
 static unsigned int __cpufreq_get(struct cpufreq_policy *policy)
 {
-	unsigned int ret_freq = 0;
-
 	if (unlikely(policy_is_inactive(policy)))
-		return ret_freq;
-
-	ret_freq = cpufreq_driver->get(policy->cpu);
-
-	/*
-	 * If fast frequency switching is used with the given policy, the check
-	 * against policy->cur is pointless, so skip it in that case too.
-	 */
-	if (policy->fast_switch_enabled)
-		return ret_freq;
-
-	if (ret_freq && policy->cur &&
-		!(cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)) {
-		/* verify no discrepancy between actual and
-					saved value exists */
-		if (unlikely(ret_freq != policy->cur)) {
-			cpufreq_out_of_sync(policy, ret_freq);
-			schedule_work(&policy->update);
-		}
-	}
+		return 0;
 
-	return ret_freq;
+	return cpufreq_verify_current_freq(policy, true);
 }
 
 /**
@@ -1652,24 +1663,6 @@ unsigned int cpufreq_get(unsigned int cpu)
 }
 EXPORT_SYMBOL(cpufreq_get);
 
-static unsigned int cpufreq_update_current_freq(struct cpufreq_policy *policy)
-{
-	unsigned int new_freq;
-
-	new_freq = cpufreq_driver->get(policy->cpu);
-	if (!new_freq)
-		return 0;
-
-	if (!policy->cur) {
-		pr_debug("cpufreq: Driver did not initialize current freq\n");
-		policy->cur = new_freq;
-	} else if (policy->cur != new_freq && has_target()) {
-		cpufreq_out_of_sync(policy, new_freq);
-	}
-
-	return new_freq;
-}
-
 static struct subsys_interface cpufreq_interface = {
 	.name		= "cpufreq",
 	.subsys		= &cpu_subsys,
@@ -2150,8 +2143,8 @@ static int cpufreq_start_governor(struct cpufreq_policy *policy)
 
 	pr_debug("%s: for CPU %u\n", __func__, policy->cpu);
 
-	if (cpufreq_driver->get && !cpufreq_driver->setpolicy)
-		cpufreq_update_current_freq(policy);
+	if (cpufreq_driver->get)
+		cpufreq_verify_current_freq(policy, false);
 
 	if (policy->governor->start) {
 		ret = policy->governor->start(policy);
@@ -2392,7 +2385,6 @@ int cpufreq_set_policy(struct cpufreq_policy *policy,
 void cpufreq_update_policy(unsigned int cpu)
 {
 	struct cpufreq_policy *policy = cpufreq_cpu_acquire(cpu);
-	struct cpufreq_policy new_policy;
 
 	if (!policy)
 		return;
@@ -2401,16 +2393,11 @@ void cpufreq_update_policy(unsigned int cpu)
 	 * BIOS might change freq behind our back
 	 * -> ask driver for current freq and notify governors about a change
 	 */
-	if (cpufreq_driver->get && !cpufreq_driver->setpolicy &&
-	    (cpufreq_suspended || WARN_ON(!cpufreq_update_current_freq(policy))))
+	if (cpufreq_driver->get && has_target() &&
+	    (cpufreq_suspended || WARN_ON(!cpufreq_verify_current_freq(policy, false))))
 		goto unlock;
 
-	pr_debug("updating policy for CPU %u\n", cpu);
-	memcpy(&new_policy, policy, sizeof(*policy));
-	new_policy.min = policy->user_policy.min;
-	new_policy.max = policy->user_policy.max;
-
-	cpufreq_set_policy(policy, &new_policy);
+	refresh_frequency_limits(policy);
 
 unlock:
 	cpufreq_cpu_release(policy);
diff --git a/drivers/cpufreq/imx-cpufreq-dt.c b/drivers/cpufreq/imx-cpufreq-dt.c
new file mode 100644
index 000000000000..b54fd26ea7df
--- /dev/null
+++ b/drivers/cpufreq/imx-cpufreq-dt.c
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <linux/cpu.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+#include <linux/slab.h>
+
+#define OCOTP_CFG3_SPEED_GRADE_SHIFT	8
+#define OCOTP_CFG3_SPEED_GRADE_MASK	(0x3 << 8)
+#define OCOTP_CFG3_MKT_SEGMENT_SHIFT    6
+#define OCOTP_CFG3_MKT_SEGMENT_MASK     (0x3 << 6)
+
+/* cpufreq-dt device registered by imx-cpufreq-dt */
+static struct platform_device *cpufreq_dt_pdev;
+static struct opp_table *cpufreq_opp_table;
+
+static int imx_cpufreq_dt_probe(struct platform_device *pdev)
+{
+	struct device *cpu_dev = get_cpu_device(0);
+	u32 cell_value, supported_hw[2];
+	int speed_grade, mkt_segment;
+	int ret;
+
+	ret = nvmem_cell_read_u32(cpu_dev, "speed_grade", &cell_value);
+	if (ret)
+		return ret;
+
+	speed_grade = (cell_value & OCOTP_CFG3_SPEED_GRADE_MASK) >> OCOTP_CFG3_SPEED_GRADE_SHIFT;
+	mkt_segment = (cell_value & OCOTP_CFG3_MKT_SEGMENT_MASK) >> OCOTP_CFG3_MKT_SEGMENT_SHIFT;
+
+	/*
+	 * Early samples without fuses written report "0 0" which means
+	 * consumer segment and minimum speed grading.
+	 *
+	 * According to datasheet minimum speed grading is not supported for
+	 * consumer parts so clamp to 1 to avoid warning for "no OPPs"
+	 *
+	 * Applies to 8mq and 8mm.
+	 */
+	if (mkt_segment == 0 && speed_grade == 0 && (
+			of_machine_is_compatible("fsl,imx8mm") ||
+			of_machine_is_compatible("fsl,imx8mq")))
+		speed_grade = 1;
+
+	supported_hw[0] = BIT(speed_grade);
+	supported_hw[1] = BIT(mkt_segment);
+	dev_info(&pdev->dev, "cpu speed grade %d mkt segment %d supported-hw %#x %#x\n",
+			speed_grade, mkt_segment, supported_hw[0], supported_hw[1]);
+
+	cpufreq_opp_table = dev_pm_opp_set_supported_hw(cpu_dev, supported_hw, 2);
+	if (IS_ERR(cpufreq_opp_table)) {
+		ret = PTR_ERR(cpufreq_opp_table);
+		dev_err(&pdev->dev, "Failed to set supported opp: %d\n", ret);
+		return ret;
+	}
+
+	cpufreq_dt_pdev = platform_device_register_data(
+			&pdev->dev, "cpufreq-dt", -1, NULL, 0);
+	if (IS_ERR(cpufreq_dt_pdev)) {
+		dev_pm_opp_put_supported_hw(cpufreq_opp_table);
+		ret = PTR_ERR(cpufreq_dt_pdev);
+		dev_err(&pdev->dev, "Failed to register cpufreq-dt: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int imx_cpufreq_dt_remove(struct platform_device *pdev)
+{
+	platform_device_unregister(cpufreq_dt_pdev);
+	dev_pm_opp_put_supported_hw(cpufreq_opp_table);
+
+	return 0;
+}
+
+static struct platform_driver imx_cpufreq_dt_driver = {
+	.probe = imx_cpufreq_dt_probe,
+	.remove = imx_cpufreq_dt_remove,
+	.driver = {
+		.name = "imx-cpufreq-dt",
+	},
+};
+module_platform_driver(imx_cpufreq_dt_driver);
+
+MODULE_ALIAS("platform:imx-cpufreq-dt");
+MODULE_DESCRIPTION("Freescale i.MX cpufreq speed grading driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/cpufreq/pcc-cpufreq.c b/drivers/cpufreq/pcc-cpufreq.c
index 1e5e64643c3a..fdc767fdbe6a 100644
--- a/drivers/cpufreq/pcc-cpufreq.c
+++ b/drivers/cpufreq/pcc-cpufreq.c
@@ -582,10 +582,10 @@ static int __init pcc_cpufreq_init(void)
 
 	/* Skip initialization if another cpufreq driver is there. */
 	if (cpufreq_get_current_driver())
-		return 0;
+		return -EEXIST;
 
 	if (acpi_disabled)
-		return 0;
+		return -ENODEV;
 
 	ret = pcc_cpufreq_probe();
 	if (ret) {
diff --git a/drivers/cpufreq/raspberrypi-cpufreq.c b/drivers/cpufreq/raspberrypi-cpufreq.c
new file mode 100644
index 000000000000..2bc7d9734272
--- /dev/null
+++ b/drivers/cpufreq/raspberrypi-cpufreq.c
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Raspberry Pi cpufreq driver
+ *
+ * Copyright (C) 2019, Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+ */
+
+#include <linux/clk.h>
+#include <linux/cpu.h>
+#include <linux/cpufreq.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+
+#define RASPBERRYPI_FREQ_INTERVAL	100000000
+
+static struct platform_device *cpufreq_dt;
+
+static int raspberrypi_cpufreq_probe(struct platform_device *pdev)
+{
+	struct device *cpu_dev;
+	unsigned long min, max;
+	unsigned long rate;
+	struct clk *clk;
+	int ret;
+
+	cpu_dev = get_cpu_device(0);
+	if (!cpu_dev) {
+		pr_err("Cannot get CPU for cpufreq driver\n");
+		return -ENODEV;
+	}
+
+	clk = clk_get(cpu_dev, NULL);
+	if (IS_ERR(clk)) {
+		dev_err(cpu_dev, "Cannot get clock for CPU0\n");
+		return PTR_ERR(clk);
+	}
+
+	/*
+	 * The max and min frequencies are configurable in the Raspberry Pi
+	 * firmware, so we query them at runtime.
+	 */
+	min = roundup(clk_round_rate(clk, 0), RASPBERRYPI_FREQ_INTERVAL);
+	max = roundup(clk_round_rate(clk, ULONG_MAX), RASPBERRYPI_FREQ_INTERVAL);
+	clk_put(clk);
+
+	for (rate = min; rate <= max; rate += RASPBERRYPI_FREQ_INTERVAL) {
+		ret = dev_pm_opp_add(cpu_dev, rate, 0);
+		if (ret)
+			goto remove_opp;
+	}
+
+	cpufreq_dt = platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
+	ret = PTR_ERR_OR_ZERO(cpufreq_dt);
+	if (ret) {
+		dev_err(cpu_dev, "Failed to create platform device, %d\n", ret);
+		goto remove_opp;
+	}
+
+	return 0;
+
+remove_opp:
+	dev_pm_opp_remove_all_dynamic(cpu_dev);
+
+	return ret;
+}
+
+static int raspberrypi_cpufreq_remove(struct platform_device *pdev)
+{
+	struct device *cpu_dev;
+
+	cpu_dev = get_cpu_device(0);
+	if (cpu_dev)
+		dev_pm_opp_remove_all_dynamic(cpu_dev);
+
+	platform_device_unregister(cpufreq_dt);
+
+	return 0;
+}
+
+/*
+ * Since the driver depends on clk-raspberrypi, which may return EPROBE_DEFER,
+ * all the activity is performed in the probe, which may be defered as well.
+ */
+static struct platform_driver raspberrypi_cpufreq_driver = {
+	.driver = {
+		.name = "raspberrypi-cpufreq",
+	},
+	.probe          = raspberrypi_cpufreq_probe,
+	.remove		= raspberrypi_cpufreq_remove,
+};
+module_platform_driver(raspberrypi_cpufreq_driver);
+
+MODULE_AUTHOR("Nicolas Saenz Julienne <nsaenzjulienne@suse.de");
+MODULE_DESCRIPTION("Raspberry Pi cpufreq driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:raspberrypi-cpufreq");
diff --git a/drivers/cpufreq/s5pv210-cpufreq.c b/drivers/cpufreq/s5pv210-cpufreq.c
index 57e5374592bd..e5cb17d4be7b 100644
--- a/drivers/cpufreq/s5pv210-cpufreq.c
+++ b/drivers/cpufreq/s5pv210-cpufreq.c
@@ -478,7 +478,7 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
 				arm_volt, arm_volt_max);
 	}
 
-	printk(KERN_DEBUG "Perf changed[L%d]\n", index);
+	pr_debug("Perf changed[L%d]\n", index);
 
 exit:
 	mutex_unlock(&set_freq_lock);
diff --git a/drivers/soc/imx/soc-imx8.c b/drivers/soc/imx/soc-imx8.c
index fc6429f9170a..b1bd8e2543ac 100644
--- a/drivers/soc/imx/soc-imx8.c
+++ b/drivers/soc/imx/soc-imx8.c
@@ -103,6 +103,9 @@ static int __init imx8_soc_init(void)
 	if (IS_ERR(soc_dev))
 		goto free_rev;
 
+	if (IS_ENABLED(CONFIG_ARM_IMX_CPUFREQ_DT))
+		platform_device_register_simple("imx-cpufreq-dt", -1, NULL, 0);
+
 	return 0;
 
 free_rev:
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index 32a1733014f5..46b167fba155 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -406,6 +406,12 @@ int cpufreq_unregister_driver(struct cpufreq_driver *driver_data);
 const char *cpufreq_get_current_driver(void);
 void *cpufreq_get_driver_data(void);
 
+static inline int cpufreq_thermal_control_enabled(struct cpufreq_driver *drv)
+{
+	return IS_ENABLED(CONFIG_CPU_THERMAL) &&
+		(drv->flags & CPUFREQ_IS_COOLING_DEV);
+}
+
 static inline void cpufreq_verify_within_limits(struct cpufreq_policy *policy,
 		unsigned int min, unsigned int max)
 {