summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorCharles Keepax <ckeepax@opensource.wolfsonmicro.com>2015-06-14 15:41:50 +0100
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2015-09-13 09:07:44 -0700
commite8dd540d01845c634350182e3a5489ff95a130a0 (patch)
tree77d1f1f6bc2c59d4e45cb2f4f445b0115538cc0a
parent3a9570eadcc10d5952c94ff3180da66c0a0c685e (diff)
downloadlwn-e8dd540d01845c634350182e3a5489ff95a130a0.tar.gz
lwn-e8dd540d01845c634350182e3a5489ff95a130a0.zip
mfd: arizona: Fix initialisation of the PM runtime
commit 72e43164fd472f6c2659c8313b87da962322dbcf upstream. The PM runtime core by default assumes a chip is suspended when runtime PM is enabled. Currently the arizona driver enables runtime PM when the chip is fully active and then disables the DCVDD regulator at the end of arizona_dev_init. This however has several problems, firstly the if we reach the end of arizona_dev_init, we did not properly follow all the proceedures for shutting down the chip, and most notably we never marked the chip as cache only so any writes occurring between then and the next PM runtime resume will be lost. Secondly, if we are already resumed when we reach the end of dev_init, then at best we get unbalanced regulator enable/disables at work we lose DCVDD whilst we need it. Additionally, since the commit 4f0216409f7c ("mfd: arizona: Add better support for system suspend"), the PM runtime operations may disable/enable the IRQ, so the IRQs must now be enabled before we call any PM operations. This patch adds a call to pm_runtime_set_active to inform the PM core that the device is starting up active and moves the PM enabling to around the IRQ initialisation to avoid any PM callbacks happening until the IRQs are initialised. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-rw-r--r--drivers/mfd/arizona-core.c14
1 files changed, 6 insertions, 8 deletions
diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index 6ca6dfab50eb..6523903e15fe 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -912,10 +912,6 @@ int arizona_dev_init(struct arizona *arizona)
arizona->pdata.gpio_defaults[i]);
}
- pm_runtime_set_autosuspend_delay(arizona->dev, 100);
- pm_runtime_use_autosuspend(arizona->dev);
- pm_runtime_enable(arizona->dev);
-
/* Chip default */
if (!arizona->pdata.clk32k_src)
arizona->pdata.clk32k_src = ARIZONA_32KZ_MCLK2;
@@ -1012,11 +1008,17 @@ int arizona_dev_init(struct arizona *arizona)
arizona->pdata.spk_fmt[i]);
}
+ pm_runtime_set_active(arizona->dev);
+ pm_runtime_enable(arizona->dev);
+
/* Set up for interrupts */
ret = arizona_irq_init(arizona);
if (ret != 0)
goto err_reset;
+ pm_runtime_set_autosuspend_delay(arizona->dev, 100);
+ pm_runtime_use_autosuspend(arizona->dev);
+
arizona_request_irq(arizona, ARIZONA_IRQ_CLKGEN_ERR, "CLKGEN error",
arizona_clkgen_err, arizona);
arizona_request_irq(arizona, ARIZONA_IRQ_OVERCLOCKED, "Overclocked",
@@ -1045,10 +1047,6 @@ int arizona_dev_init(struct arizona *arizona)
goto err_irq;
}
-#ifdef CONFIG_PM
- regulator_disable(arizona->dcvdd);
-#endif
-
return 0;
err_irq: