summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorDinh Nguyen <dinguyen@altera.com>2012-09-27 10:58:05 -0600
committerArtem Bityutskiy <artem.bityutskiy@linux.intel.com>2012-11-15 15:37:46 +0200
commit2a0a288ec258bd38d8855fad9419aeb45b7e8499 (patch)
treef726010165435c55d7b54936fa2521391b05a89b
parent30fad64325ba368ffe1f92bd37f4b96c1fa4da83 (diff)
downloadlwn-2a0a288ec258bd38d8855fad9419aeb45b7e8499.tar.gz
lwn-2a0a288ec258bd38d8855fad9419aeb45b7e8499.zip
mtd: denali: split the generic driver and PCI layer
The Denali controller can also be found in SoC devices attached to a simple bus. Move the PCI specific parts into denali_pci so that we can add a denali_dt that uses the same driver but for a device tree driver instead of a PCI based device. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
-rw-r--r--drivers/mtd/nand/Kconfig11
-rw-r--r--drivers/mtd/nand/Makefile1
-rw-r--r--drivers/mtd/nand/denali.c162
-rw-r--r--drivers/mtd/nand/denali.h4
-rw-r--r--drivers/mtd/nand/denali_pci.c144
5 files changed, 188 insertions, 134 deletions
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 4883139460be..5102e87f8df0 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -57,8 +57,15 @@ config MTD_NAND_AUTCPU12
access the SmartMediaCard.
config MTD_NAND_DENALI
- depends on PCI
+ tristate "Support Denali NAND controller"
+ help
+ Enable support for the Denali NAND controller. This should be
+ combined with either the PCI or platform drivers to provide device
+ registration.
+
+config MTD_NAND_DENALI_PCI
tristate "Support Denali NAND controller on Intel Moorestown"
+ depends on PCI && MTD_NAND_DENALI
help
Enable the driver for NAND flash on Intel Moorestown, using the
Denali NAND controller core.
@@ -66,7 +73,7 @@ config MTD_NAND_DENALI
config MTD_NAND_DENALI_SCRATCH_REG_ADDR
hex "Denali NAND size scratch register address"
default "0xFF108018"
- depends on MTD_NAND_DENALI
+ depends on MTD_NAND_DENALI_PCI
help
Some platforms place the NAND chip size in a scratch register
because (some versions of) the driver aren't able to automatically
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 2cbd0916b733..96a6171c9d8f 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_NAND_SPIA) += spia.o
obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams-delta.o
obj-$(CONFIG_MTD_NAND_AUTCPU12) += autcpu12.o
obj-$(CONFIG_MTD_NAND_DENALI) += denali.o
+obj-$(CONFIG_MTD_NAND_DENALI_PCI) += denali_pci.o
obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o
obj-$(CONFIG_MTD_NAND_BF5XX) += bf5xx_nand.o
obj-$(CONFIG_MTD_NAND_PPCHAMELEONEVB) += ppchameleonevb.o
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index e706a237170f..0c8bb6bf8424 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -16,14 +16,12 @@
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*
*/
-
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/wait.h>
#include <linux/mutex.h>
#include <linux/slab.h>
-#include <linux/pci.h>
#include <linux/mtd/mtd.h>
#include <linux/module.h>
@@ -89,13 +87,6 @@ MODULE_PARM_DESC(onfi_timing_mode, "Overrides default ONFI setting."
* format the bank into the proper bits for the controller */
#define BANK(x) ((x) << 24)
-/* List of platforms this NAND controller has be integrated into */
-static const struct pci_device_id denali_pci_ids[] = {
- { PCI_VDEVICE(INTEL, 0x0701), INTEL_CE4100 },
- { PCI_VDEVICE(INTEL, 0x0809), INTEL_MRST },
- { /* end: all zeroes */ }
-};
-
/* forward declarations */
static void clear_interrupts(struct denali_nand_info *denali);
static uint32_t wait_for_irq(struct denali_nand_info *denali,
@@ -699,7 +690,7 @@ static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask)
if (comp_res == 0) {
/* timeout */
- printk(KERN_ERR "timeout occurred, status = 0x%x, mask = 0x%x\n",
+ pr_err("timeout occurred, status = 0x%x, mask = 0x%x\n",
intr_status, irq_mask);
intr_status = 0;
@@ -1305,8 +1296,7 @@ static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
/* TODO: Read OOB data */
break;
default:
- printk(KERN_ERR ": unsupported command"
- " received 0x%x\n", cmd);
+ pr_err(": unsupported command received 0x%x\n", cmd);
break;
}
}
@@ -1425,107 +1415,48 @@ void denali_drv_init(struct denali_nand_info *denali)
denali->irq_status = 0;
}
-/* driver entry point */
-static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
+int denali_init(struct denali_nand_info *denali)
{
- int ret = -ENODEV;
- resource_size_t csr_base, mem_base;
- unsigned long csr_len, mem_len;
- struct denali_nand_info *denali;
-
- denali = kzalloc(sizeof(*denali), GFP_KERNEL);
- if (!denali)
- return -ENOMEM;
+ int ret;
- ret = pci_enable_device(dev);
- if (ret) {
- printk(KERN_ERR "Spectra: pci_enable_device failed.\n");
- goto failed_alloc_memery;
- }
-
- if (id->driver_data == INTEL_CE4100) {
+ if (denali->platform == INTEL_CE4100) {
/* Due to a silicon limitation, we can only support
* ONFI timing mode 1 and below.
*/
if (onfi_timing_mode < -1 || onfi_timing_mode > 1) {
- printk(KERN_ERR "Intel CE4100 only supports"
- " ONFI timing mode 1 or below\n");
- ret = -EINVAL;
- goto failed_enable_dev;
- }
- denali->platform = INTEL_CE4100;
- mem_base = pci_resource_start(dev, 0);
- mem_len = pci_resource_len(dev, 1);
- csr_base = pci_resource_start(dev, 1);
- csr_len = pci_resource_len(dev, 1);
- } else {
- denali->platform = INTEL_MRST;
- csr_base = pci_resource_start(dev, 0);
- csr_len = pci_resource_len(dev, 0);
- mem_base = pci_resource_start(dev, 1);
- mem_len = pci_resource_len(dev, 1);
- if (!mem_len) {
- mem_base = csr_base + csr_len;
- mem_len = csr_len;
+ pr_err("Intel CE4100 only supports ONFI timing mode 1 or below\n");
+ return -EINVAL;
}
}
/* Is 32-bit DMA supported? */
- ret = dma_set_mask(&dev->dev, DMA_BIT_MASK(32));
+ ret = dma_set_mask(denali->dev, DMA_BIT_MASK(32));
if (ret) {
- printk(KERN_ERR "Spectra: no usable DMA configuration\n");
- goto failed_enable_dev;
+ pr_err("Spectra: no usable DMA configuration\n");
+ return ret;
}
- denali->buf.dma_buf = dma_map_single(&dev->dev, denali->buf.buf,
+ denali->buf.dma_buf = dma_map_single(denali->dev, denali->buf.buf,
DENALI_BUF_SIZE,
DMA_BIDIRECTIONAL);
- if (dma_mapping_error(&dev->dev, denali->buf.dma_buf)) {
- dev_err(&dev->dev, "Spectra: failed to map DMA buffer\n");
- goto failed_enable_dev;
- }
-
- pci_set_master(dev);
- denali->dev = &dev->dev;
- denali->mtd.dev.parent = &dev->dev;
-
- ret = pci_request_regions(dev, DENALI_NAND_NAME);
- if (ret) {
- printk(KERN_ERR "Spectra: Unable to request memory regions\n");
- goto failed_dma_map;
- }
-
- denali->flash_reg = ioremap_nocache(csr_base, csr_len);
- if (!denali->flash_reg) {
- printk(KERN_ERR "Spectra: Unable to remap memory region\n");
- ret = -ENOMEM;
- goto failed_req_regions;
- }
-
- denali->flash_mem = ioremap_nocache(mem_base, mem_len);
- if (!denali->flash_mem) {
- printk(KERN_ERR "Spectra: ioremap_nocache failed!");
- ret = -ENOMEM;
- goto failed_remap_reg;
+ if (dma_mapping_error(denali->dev, denali->buf.dma_buf)) {
+ dev_err(denali->dev, "Spectra: failed to map DMA buffer\n");
+ return -EIO;
}
-
+ denali->mtd.dev.parent = denali->dev;
denali_hw_init(denali);
denali_drv_init(denali);
/* denali_isr register is done after all the hardware
* initilization is finished*/
- if (request_irq(dev->irq, denali_isr, IRQF_SHARED,
+ if (request_irq(denali->irq, denali_isr, IRQF_SHARED,
DENALI_NAND_NAME, denali)) {
- printk(KERN_ERR "Spectra: Unable to allocate IRQ\n");
- ret = -ENODEV;
- goto failed_remap_mem;
+ pr_err("Spectra: Unable to allocate IRQ\n");
+ return -ENODEV;
}
/* now that our ISR is registered, we can enable interrupts */
denali_set_intr_modes(denali, true);
-
- pci_set_drvdata(dev, denali);
-
denali->mtd.name = "denali-nand";
denali->mtd.owner = THIS_MODULE;
denali->mtd.priv = &denali->nand;
@@ -1549,8 +1480,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
*/
if (denali->mtd.writesize > NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE) {
ret = -ENODEV;
- printk(KERN_ERR "Spectra: device size not supported by this "
- "version of MTD.");
+ pr_err("Spectra: device size not supported by this version of MTD.");
goto failed_req_irq;
}
@@ -1602,8 +1532,8 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
} else if (denali->mtd.oobsize < (denali->bbtskipbytes +
ECC_8BITS * (denali->mtd.writesize /
ECC_SECTOR_SIZE))) {
- printk(KERN_ERR "Your NAND chip OOB is not large enough to"
- " contain 8bit ECC correction codes");
+ pr_err("Your NAND chip OOB is not large enough to \
+ contain 8bit ECC correction codes");
goto failed_req_irq;
} else {
denali->nand.ecc.strength = 8;
@@ -1655,56 +1585,24 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
ret = mtd_device_register(&denali->mtd, NULL, 0);
if (ret) {
- dev_err(&dev->dev, "Spectra: Failed to register MTD: %d\n",
+ dev_err(denali->dev, "Spectra: Failed to register MTD: %d\n",
ret);
goto failed_req_irq;
}
return 0;
failed_req_irq:
- denali_irq_cleanup(dev->irq, denali);
-failed_remap_mem:
- iounmap(denali->flash_mem);
-failed_remap_reg:
- iounmap(denali->flash_reg);
-failed_req_regions:
- pci_release_regions(dev);
-failed_dma_map:
- dma_unmap_single(&dev->dev, denali->buf.dma_buf, DENALI_BUF_SIZE,
- DMA_BIDIRECTIONAL);
-failed_enable_dev:
- pci_disable_device(dev);
-failed_alloc_memery:
- kfree(denali);
+ denali_irq_cleanup(denali->irq, denali);
+
return ret;
}
+EXPORT_SYMBOL(denali_init);
/* driver exit point */
-static void denali_pci_remove(struct pci_dev *dev)
+void denali_remove(struct denali_nand_info *denali)
{
- struct denali_nand_info *denali = pci_get_drvdata(dev);
-
- nand_release(&denali->mtd);
-
- denali_irq_cleanup(dev->irq, denali);
-
- iounmap(denali->flash_reg);
- iounmap(denali->flash_mem);
- pci_release_regions(dev);
- pci_disable_device(dev);
- dma_unmap_single(&dev->dev, denali->buf.dma_buf, DENALI_BUF_SIZE,
- DMA_BIDIRECTIONAL);
- pci_set_drvdata(dev, NULL);
- kfree(denali);
+ denali_irq_cleanup(denali->irq, denali);
+ dma_unmap_single(denali->dev, denali->buf.dma_buf, DENALI_BUF_SIZE,
+ DMA_BIDIRECTIONAL);
}
-
-MODULE_DEVICE_TABLE(pci, denali_pci_ids);
-
-static struct pci_driver denali_pci_driver = {
- .name = DENALI_NAND_NAME,
- .id_table = denali_pci_ids,
- .probe = denali_pci_probe,
- .remove = denali_pci_remove,
-};
-
-module_pci_driver(denali_pci_driver);
+EXPORT_SYMBOL(denali_remove);
diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h
index fabb9d56b39e..e5aa99583e43 100644
--- a/drivers/mtd/nand/denali.h
+++ b/drivers/mtd/nand/denali.h
@@ -487,6 +487,7 @@ struct denali_nand_info {
uint32_t irq_status;
int irq_debug_array[32];
int idx;
+ int irq;
uint32_t devnum; /* represent how many nands connected */
uint32_t fwblks; /* represent how many blocks FW used */
@@ -496,4 +497,7 @@ struct denali_nand_info {
uint32_t max_banks;
};
+extern int denali_init(struct denali_nand_info *denali);
+extern void denali_remove(struct denali_nand_info *denali);
+
#endif /*_LLD_NAND_*/
diff --git a/drivers/mtd/nand/denali_pci.c b/drivers/mtd/nand/denali_pci.c
new file mode 100644
index 000000000000..ea074e6c7622
--- /dev/null
+++ b/drivers/mtd/nand/denali_pci.c
@@ -0,0 +1,144 @@
+/*
+ * NAND Flash Controller Device Driver
+ * Copyright © 2009-2010, Intel Corporation and its suppliers.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+
+#include "denali.h"
+
+#define DENALI_NAND_NAME "denali-nand-pci"
+
+/* List of platforms this NAND controller has be integrated into */
+static DEFINE_PCI_DEVICE_TABLE(denali_pci_ids) = {
+ { PCI_VDEVICE(INTEL, 0x0701), INTEL_CE4100 },
+ { PCI_VDEVICE(INTEL, 0x0809), INTEL_MRST },
+ { /* end: all zeroes */ }
+};
+MODULE_DEVICE_TABLE(pci, denali_pci_ids);
+
+static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ int ret = -ENODEV;
+ resource_size_t csr_base, mem_base;
+ unsigned long csr_len, mem_len;
+ struct denali_nand_info *denali;
+
+ denali = kzalloc(sizeof(*denali), GFP_KERNEL);
+ if (!denali)
+ return -ENOMEM;
+
+ ret = pci_enable_device(dev);
+ if (ret) {
+ pr_err("Spectra: pci_enable_device failed.\n");
+ goto failed_alloc_memery;
+ }
+
+ if (id->driver_data == INTEL_CE4100) {
+ denali->platform = INTEL_CE4100;
+ mem_base = pci_resource_start(dev, 0);
+ mem_len = pci_resource_len(dev, 1);
+ csr_base = pci_resource_start(dev, 1);
+ csr_len = pci_resource_len(dev, 1);
+ } else {
+ denali->platform = INTEL_MRST;
+ csr_base = pci_resource_start(dev, 0);
+ csr_len = pci_resource_len(dev, 0);
+ mem_base = pci_resource_start(dev, 1);
+ mem_len = pci_resource_len(dev, 1);
+ if (!mem_len) {
+ mem_base = csr_base + csr_len;
+ mem_len = csr_len;
+ }
+ }
+
+ pci_set_master(dev);
+ denali->dev = &dev->dev;
+ denali->irq = dev->irq;
+
+ ret = pci_request_regions(dev, DENALI_NAND_NAME);
+ if (ret) {
+ pr_err("Spectra: Unable to request memory regions\n");
+ goto failed_enable_dev;
+ }
+
+ denali->flash_reg = ioremap_nocache(csr_base, csr_len);
+ if (!denali->flash_reg) {
+ pr_err("Spectra: Unable to remap memory region\n");
+ ret = -ENOMEM;
+ goto failed_req_regions;
+ }
+
+ denali->flash_mem = ioremap_nocache(mem_base, mem_len);
+ if (!denali->flash_mem) {
+ pr_err("Spectra: ioremap_nocache failed!");
+ ret = -ENOMEM;
+ goto failed_remap_reg;
+ }
+
+ ret = denali_init(denali);
+ if (ret)
+ goto failed_remap_mem;
+
+ pci_set_drvdata(dev, denali);
+
+ return 0;
+
+failed_remap_mem:
+ iounmap(denali->flash_mem);
+failed_remap_reg:
+ iounmap(denali->flash_reg);
+failed_req_regions:
+ pci_release_regions(dev);
+failed_enable_dev:
+ pci_disable_device(dev);
+failed_alloc_memery:
+ kfree(denali);
+
+ return ret;
+}
+
+/* driver exit point */
+static void denali_pci_remove(struct pci_dev *dev)
+{
+ struct denali_nand_info *denali = pci_get_drvdata(dev);
+
+ denali_remove(denali);
+ iounmap(denali->flash_reg);
+ iounmap(denali->flash_mem);
+ pci_release_regions(dev);
+ pci_disable_device(dev);
+ pci_set_drvdata(dev, NULL);
+ kfree(denali);
+}
+
+static struct pci_driver denali_pci_driver = {
+ .name = DENALI_NAND_NAME,
+ .id_table = denali_pci_ids,
+ .probe = denali_pci_probe,
+ .remove = denali_pci_remove,
+};
+
+static int __devinit denali_init_pci(void)
+{
+ pr_info("Spectra MTD driver built on %s @ %s\n", __DATE__, __TIME__);
+ return pci_register_driver(&denali_pci_driver);
+}
+module_init(denali_init_pci);
+
+static void __devexit denali_exit_pci(void)
+{
+ pci_unregister_driver(&denali_pci_driver);
+}
+module_exit(denali_exit_pci);