Merge tag 'cpufreq-arm-updates-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm

Merge ARM cpufreq updates for 6.9 from Viresh Kumar:

"- General enhancements / cleanups to cpufreq drivers (tianyu2, Nícolas
   F. R. A. Prado, Erick Archer, Arnd Bergmann, Anastasia Belova).
 - Update cpufreq-dt-platdev to block/approve devices (Richard Acayan).
 - scmi: get transition delay from firmware (Pierre Gondois)."

* tag 'cpufreq-arm-updates-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
  cpufreq: scmi: Set transition_delay_us
  firmware: arm_scmi: Populate fast channel rate_limit
  firmware: arm_scmi: Populate perf commands rate_limit
  cpufreq: qcom-hw: add CONFIG_COMMON_CLK dependency
  cpufreq: dt-platdev: block SDM670 in cpufreq-dt-platdev
  cpufreq: mediatek-hw: Don't error out if supply is not found
  Documentation: power: Use kcalloc() instead of kzalloc()
  cpufreq: mediatek-hw: Wait for CPU supplies before probing
  cpufreq: brcmstb-avs-cpufreq: add check for cpufreq_cpu_get's return value
  cpufreq: imx6: use regmap to read ocotp register

13 files changed, 137 insertions, 43 deletions

diff --git a/Documentation/power/opp.rst b/Documentation/power/opp.rst
index a7c03c470980..1b7f1d854f14 100644
--- a/Documentation/power/opp.rst
+++ b/Documentation/power/opp.rst
@@ -305,7 +305,7 @@ dev_pm_opp_get_opp_count
 	 {
 		/* Do things */
 		num_available = dev_pm_opp_get_opp_count(dev);
-		speeds = kzalloc(sizeof(u32) * num_available, GFP_KERNEL);
+		speeds = kcalloc(num_available, sizeof(u32), GFP_KERNEL);
 		/* populate the table in increasing order */
 		freq = 0;
 		while (!IS_ERR(opp = dev_pm_opp_find_freq_ceil(dev, &freq))) {
diff --git a/Documentation/translations/zh_CN/power/opp.rst b/Documentation/translations/zh_CN/power/opp.rst
index 8d6e3f6f6202..7470fa2d4c43 100644
--- a/Documentation/translations/zh_CN/power/opp.rst
+++ b/Documentation/translations/zh_CN/power/opp.rst
@@ -274,7 +274,7 @@ dev_pm_opp_get_opp_count
 	 {
 		/* 做一些事情 */
 		num_available = dev_pm_opp_get_opp_count(dev);
-		speeds = kzalloc(sizeof(u32) * num_available, GFP_KERNEL);
+		speeds = kcalloc(num_available, sizeof(u32), GFP_KERNEL);
 		/* 按升序填充表 */
 		freq = 0;
 		while (!IS_ERR(opp = dev_pm_opp_find_freq_ceil(dev, &freq))) {
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index f911606897b8..a0ebad77666e 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -173,6 +173,7 @@ config ARM_QCOM_CPUFREQ_NVMEM
 config ARM_QCOM_CPUFREQ_HW
 	tristate "QCOM CPUFreq HW driver"
 	depends on ARCH_QCOM || COMPILE_TEST
+	depends on COMMON_CLK
 	help
 	  Support for the CPUFreq HW driver.
 	  Some QCOM chipsets have a HW engine to offload the steps
diff --git a/drivers/cpufreq/brcmstb-avs-cpufreq.c b/drivers/cpufreq/brcmstb-avs-cpufreq.c
index 35fb3a559ea9..1a1857b0a6f4 100644
--- a/drivers/cpufreq/brcmstb-avs-cpufreq.c
+++ b/drivers/cpufreq/brcmstb-avs-cpufreq.c
@@ -481,6 +481,8 @@ static bool brcm_avs_is_firmware_loaded(struct private_data *priv)
 static unsigned int brcm_avs_cpufreq_get(unsigned int cpu)
 {
 	struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
+	if (!policy)
+		return 0;
 	struct private_data *priv = policy->driver_data;
 
 	cpufreq_cpu_put(policy);
diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
index bd1e1357cef8..b993a498084b 100644
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -156,6 +156,7 @@ static const struct of_device_id blocklist[] __initconst = {
 	{ .compatible = "qcom,sc7280", },
 	{ .compatible = "qcom,sc8180x", },
 	{ .compatible = "qcom,sc8280xp", },
+	{ .compatible = "qcom,sdm670", },
 	{ .compatible = "qcom,sdm845", },
 	{ .compatible = "qcom,sdx75", },
 	{ .compatible = "qcom,sm6115", },
diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c
index 33728c242f66..c20d3ecc5a81 100644
--- a/drivers/cpufreq/imx6q-cpufreq.c
+++ b/drivers/cpufreq/imx6q-cpufreq.c
@@ -14,6 +14,8 @@
 #include <linux/pm_opp.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
 
 #define PU_SOC_VOLTAGE_NORMAL	1250000
 #define PU_SOC_VOLTAGE_HIGH	1275000
@@ -225,8 +227,6 @@ static void imx6x_disable_freq_in_opp(struct device *dev, unsigned long freq)
 
 static int imx6q_opp_check_speed_grading(struct device *dev)
 {
-	struct device_node *np;
-	void __iomem *base;
 	u32 val;
 	int ret;
 
@@ -235,16 +235,11 @@ static int imx6q_opp_check_speed_grading(struct device *dev)
 		if (ret)
 			return ret;
 	} else {
-		np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-ocotp");
-		if (!np)
-			return -ENOENT;
+		struct regmap *ocotp;
 
-		base = of_iomap(np, 0);
-		of_node_put(np);
-		if (!base) {
-			dev_err(dev, "failed to map ocotp\n");
-			return -EFAULT;
-		}
+		ocotp = syscon_regmap_lookup_by_compatible("fsl,imx6q-ocotp");
+		if (IS_ERR(ocotp))
+			return -ENOENT;
 
 		/*
 		 * SPEED_GRADING[1:0] defines the max speed of ARM:
@@ -254,8 +249,7 @@ static int imx6q_opp_check_speed_grading(struct device *dev)
 		 * 2b'00: 792000000Hz;
 		 * We need to set the max speed of ARM according to fuse map.
 		 */
-		val = readl_relaxed(base + OCOTP_CFG3);
-		iounmap(base);
+		regmap_read(ocotp, OCOTP_CFG3, &val);
 	}
 
 	val >>= OCOTP_CFG3_SPEED_SHIFT;
@@ -290,25 +284,16 @@ static int imx6ul_opp_check_speed_grading(struct device *dev)
 		if (ret)
 			return ret;
 	} else {
-		struct device_node *np;
-		void __iomem *base;
-
-		np = of_find_compatible_node(NULL, NULL, "fsl,imx6ul-ocotp");
-		if (!np)
-			np = of_find_compatible_node(NULL, NULL,
-						     "fsl,imx6ull-ocotp");
-		if (!np)
-			return -ENOENT;
+		struct regmap *ocotp;
 
-		base = of_iomap(np, 0);
-		of_node_put(np);
-		if (!base) {
-			dev_err(dev, "failed to map ocotp\n");
-			return -EFAULT;
-		}
+		ocotp = syscon_regmap_lookup_by_compatible("fsl,imx6ul-ocotp");
+		if (IS_ERR(ocotp))
+			ocotp = syscon_regmap_lookup_by_compatible("fsl,imx6ull-ocotp");
+
+		if (IS_ERR(ocotp))
+			return -ENOENT;
 
-		val = readl_relaxed(base + OCOTP_CFG3);
-		iounmap(base);
+		regmap_read(ocotp, OCOTP_CFG3, &val);
 	}
 
 	/*
diff --git a/drivers/cpufreq/mediatek-cpufreq-hw.c b/drivers/cpufreq/mediatek-cpufreq-hw.c
index d46afb3c0092..8d097dcddda4 100644
--- a/drivers/cpufreq/mediatek-cpufreq-hw.c
+++ b/drivers/cpufreq/mediatek-cpufreq-hw.c
@@ -13,6 +13,7 @@
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
 #include <linux/slab.h>
 
 #define LUT_MAX_ENTRIES			32U
@@ -300,7 +301,23 @@ static struct cpufreq_driver cpufreq_mtk_hw_driver = {
 static int mtk_cpufreq_hw_driver_probe(struct platform_device *pdev)
 {
 	const void *data;
-	int ret;
+	int ret, cpu;
+	struct device *cpu_dev;
+	struct regulator *cpu_reg;
+
+	/* Make sure that all CPU supplies are available before proceeding. */
+	for_each_possible_cpu(cpu) {
+		cpu_dev = get_cpu_device(cpu);
+		if (!cpu_dev)
+			return dev_err_probe(&pdev->dev, -EPROBE_DEFER,
+					     "Failed to get cpu%d device\n", cpu);
+
+		cpu_reg = devm_regulator_get(cpu_dev, "cpu");
+		if (IS_ERR(cpu_reg))
+			return dev_err_probe(&pdev->dev, PTR_ERR(cpu_reg),
+					     "CPU%d regulator get failed\n", cpu);
+	}
+
 
 	data = of_device_get_match_data(&pdev->dev);
 	if (!data)
diff --git a/drivers/cpufreq/scmi-cpufreq.c b/drivers/cpufreq/scmi-cpufreq.c
index 4ee23f4ebf4a..0b483bd0d3ca 100644
--- a/drivers/cpufreq/scmi-cpufreq.c
+++ b/drivers/cpufreq/scmi-cpufreq.c
@@ -144,6 +144,29 @@ scmi_get_cpu_power(struct device *cpu_dev, unsigned long *power,
 	return 0;
 }
 
+static int
+scmi_get_rate_limit(u32 domain, bool has_fast_switch)
+{
+	int ret, rate_limit;
+
+	if (has_fast_switch) {
+		/*
+		 * Fast channels are used whenever available,
+		 * so use their rate_limit value if populated.
+		 */
+		ret = perf_ops->fast_switch_rate_limit(ph, domain,
+						       &rate_limit);
+		if (!ret && rate_limit)
+			return rate_limit;
+	}
+
+	ret = perf_ops->rate_limit_get(ph, domain, &rate_limit);
+	if (ret)
+		return 0;
+
+	return rate_limit;
+}
+
 static int scmi_cpufreq_init(struct cpufreq_policy *policy)
 {
 	int ret, nr_opp, domain;
@@ -250,6 +273,9 @@ static int scmi_cpufreq_init(struct cpufreq_policy *policy)
 	policy->fast_switch_possible =
 		perf_ops->fast_switch_possible(ph, domain);
 
+	policy->transition_delay_us =
+		scmi_get_rate_limit(domain, policy->fast_switch_possible);
+
 	return 0;
 
 out_free_opp:
diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index 3ea64b22cf0d..1d38ecfafc59 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -1617,7 +1617,7 @@ static void
 scmi_common_fastchannel_init(const struct scmi_protocol_handle *ph,
 			     u8 describe_id, u32 message_id, u32 valid_size,
 			     u32 domain, void __iomem **p_addr,
-			     struct scmi_fc_db_info **p_db)
+			     struct scmi_fc_db_info **p_db, u32 *rate_limit)
 {
 	int ret;
 	u32 flags;
@@ -1661,6 +1661,9 @@ scmi_common_fastchannel_init(const struct scmi_protocol_handle *ph,
 		goto err_xfer;
 	}
 
+	if (rate_limit)
+		*rate_limit = le32_to_cpu(resp->rate_limit) & GENMASK(19, 0);
+
 	phys_addr = le32_to_cpu(resp->chan_addr_low);
 	phys_addr |= (u64)le32_to_cpu(resp->chan_addr_high) << 32;
 	addr = devm_ioremap(ph->dev, phys_addr, size);
diff --git a/drivers/firmware/arm_scmi/perf.c b/drivers/firmware/arm_scmi/perf.c
index 211e8e0aef2c..fbcbd703198a 100644
--- a/drivers/firmware/arm_scmi/perf.c
+++ b/drivers/firmware/arm_scmi/perf.c
@@ -153,6 +153,7 @@ struct perf_dom_info {
 	bool perf_fastchannels;
 	bool level_indexing_mode;
 	u32 opp_count;
+	u32 rate_limit_us;
 	u32 sustained_freq_khz;
 	u32 sustained_perf_level;
 	unsigned long mult_factor;
@@ -266,6 +267,8 @@ scmi_perf_domain_attributes_get(const struct scmi_protocol_handle *ph,
 		if (PROTOCOL_REV_MAJOR(version) >= 0x4)
 			dom_info->level_indexing_mode =
 				SUPPORTS_LEVEL_INDEXING(flags);
+		dom_info->rate_limit_us = le32_to_cpu(attr->rate_limit_us) &
+						GENMASK(19, 0);
 		dom_info->sustained_freq_khz =
 					le32_to_cpu(attr->sustained_freq_khz);
 		dom_info->sustained_perf_level =
@@ -786,23 +789,27 @@ static void scmi_perf_domain_init_fc(const struct scmi_protocol_handle *ph,
 
 	ph->hops->fastchannel_init(ph, PERF_DESCRIBE_FASTCHANNEL,
 				   PERF_LEVEL_GET, 4, dom->id,
-				   &fc[PERF_FC_LEVEL].get_addr, NULL);
+				   &fc[PERF_FC_LEVEL].get_addr, NULL,
+				   &fc[PERF_FC_LEVEL].rate_limit);
 
 	ph->hops->fastchannel_init(ph, PERF_DESCRIBE_FASTCHANNEL,
 				   PERF_LIMITS_GET, 8, dom->id,
-				   &fc[PERF_FC_LIMIT].get_addr, NULL);
+				   &fc[PERF_FC_LIMIT].get_addr, NULL,
+				   &fc[PERF_FC_LIMIT].rate_limit);
 
 	if (dom->info.set_perf)
 		ph->hops->fastchannel_init(ph, PERF_DESCRIBE_FASTCHANNEL,
 					   PERF_LEVEL_SET, 4, dom->id,
 					   &fc[PERF_FC_LEVEL].set_addr,
-					   &fc[PERF_FC_LEVEL].set_db);
+					   &fc[PERF_FC_LEVEL].set_db,
+					   &fc[PERF_FC_LEVEL].rate_limit);
 
 	if (dom->set_limits)
 		ph->hops->fastchannel_init(ph, PERF_DESCRIBE_FASTCHANNEL,
 					   PERF_LIMITS_SET, 8, dom->id,
 					   &fc[PERF_FC_LIMIT].set_addr,
-					   &fc[PERF_FC_LIMIT].set_db);
+					   &fc[PERF_FC_LIMIT].set_db,
+					   &fc[PERF_FC_LIMIT].rate_limit);
 
 	dom->fc_info = fc;
 }
@@ -855,6 +862,23 @@ scmi_dvfs_transition_latency_get(const struct scmi_protocol_handle *ph,
 	return dom->opp[dom->opp_count - 1].trans_latency_us * 1000;
 }
 
+static int
+scmi_dvfs_rate_limit_get(const struct scmi_protocol_handle *ph,
+			 u32 domain, u32 *rate_limit)
+{
+	struct perf_dom_info *dom;
+
+	if (!rate_limit)
+		return -EINVAL;
+
+	dom = scmi_perf_domain_lookup(ph, domain);
+	if (IS_ERR(dom))
+		return PTR_ERR(dom);
+
+	*rate_limit = dom->rate_limit_us;
+	return 0;
+}
+
 static int scmi_dvfs_freq_set(const struct scmi_protocol_handle *ph, u32 domain,
 			      unsigned long freq, bool poll)
 {
@@ -954,6 +978,25 @@ static bool scmi_fast_switch_possible(const struct scmi_protocol_handle *ph,
 	return dom->fc_info && dom->fc_info[PERF_FC_LEVEL].set_addr;
 }
 
+static int scmi_fast_switch_rate_limit(const struct scmi_protocol_handle *ph,
+				       u32 domain, u32 *rate_limit)
+{
+	struct perf_dom_info *dom;
+
+	if (!rate_limit)
+		return -EINVAL;
+
+	dom = scmi_perf_domain_lookup(ph, domain);
+	if (IS_ERR(dom))
+		return PTR_ERR(dom);
+
+	if (!dom->fc_info)
+		return -EINVAL;
+
+	*rate_limit = dom->fc_info[PERF_FC_LEVEL].rate_limit;
+	return 0;
+}
+
 static enum scmi_power_scale
 scmi_power_scale_get(const struct scmi_protocol_handle *ph)
 {
@@ -970,11 +1013,13 @@ static const struct scmi_perf_proto_ops perf_proto_ops = {
 	.level_set = scmi_perf_level_set,
 	.level_get = scmi_perf_level_get,
 	.transition_latency_get = scmi_dvfs_transition_latency_get,
+	.rate_limit_get = scmi_dvfs_rate_limit_get,
 	.device_opps_add = scmi_dvfs_device_opps_add,
 	.freq_set = scmi_dvfs_freq_set,
 	.freq_get = scmi_dvfs_freq_get,
 	.est_power_get = scmi_dvfs_est_power_get,
 	.fast_switch_possible = scmi_fast_switch_possible,
+	.fast_switch_rate_limit = scmi_fast_switch_rate_limit,
 	.power_scale_get = scmi_power_scale_get,
 };
 
diff --git a/drivers/firmware/arm_scmi/powercap.c b/drivers/firmware/arm_scmi/powercap.c
index a4c6cd4716fe..604184c044ff 100644
--- a/drivers/firmware/arm_scmi/powercap.c
+++ b/drivers/firmware/arm_scmi/powercap.c
@@ -703,20 +703,24 @@ static void scmi_powercap_domain_init_fc(const struct scmi_protocol_handle *ph,
 	ph->hops->fastchannel_init(ph, POWERCAP_DESCRIBE_FASTCHANNEL,
 				   POWERCAP_CAP_SET, 4, domain,
 				   &fc[POWERCAP_FC_CAP].set_addr,
-				   &fc[POWERCAP_FC_CAP].set_db);
+				   &fc[POWERCAP_FC_CAP].set_db,
+				   &fc[POWERCAP_FC_CAP].rate_limit);
 
 	ph->hops->fastchannel_init(ph, POWERCAP_DESCRIBE_FASTCHANNEL,
 				   POWERCAP_CAP_GET, 4, domain,
-				   &fc[POWERCAP_FC_CAP].get_addr, NULL);
+				   &fc[POWERCAP_FC_CAP].get_addr, NULL,
+				   &fc[POWERCAP_FC_CAP].rate_limit);
 
 	ph->hops->fastchannel_init(ph, POWERCAP_DESCRIBE_FASTCHANNEL,
 				   POWERCAP_PAI_SET, 4, domain,
 				   &fc[POWERCAP_FC_PAI].set_addr,
-				   &fc[POWERCAP_FC_PAI].set_db);
+				   &fc[POWERCAP_FC_PAI].set_db,
+				   &fc[POWERCAP_FC_PAI].rate_limit);
 
 	ph->hops->fastchannel_init(ph, POWERCAP_DESCRIBE_FASTCHANNEL,
 				   POWERCAP_PAI_GET, 4, domain,
-				   &fc[POWERCAP_FC_PAI].get_addr, NULL);
+				   &fc[POWERCAP_FC_PAI].get_addr, NULL,
+				   &fc[POWERCAP_PAI_GET].rate_limit);
 
 	*p_fc = fc;
 }
diff --git a/drivers/firmware/arm_scmi/protocols.h b/drivers/firmware/arm_scmi/protocols.h
index e683c26f24eb..8b5d9ce4a33a 100644
--- a/drivers/firmware/arm_scmi/protocols.h
+++ b/drivers/firmware/arm_scmi/protocols.h
@@ -234,6 +234,7 @@ struct scmi_fc_info {
 	void __iomem *set_addr;
 	void __iomem *get_addr;
 	struct scmi_fc_db_info *set_db;
+	u32 rate_limit;
 };
 
 /**
@@ -268,7 +269,8 @@ struct scmi_proto_helpers_ops {
 				 u8 describe_id, u32 message_id,
 				 u32 valid_size, u32 domain,
 				 void __iomem **p_addr,
-				 struct scmi_fc_db_info **p_db);
+				 struct scmi_fc_db_info **p_db,
+				 u32 *rate_limit);
 	void (*fastchannel_db_ring)(struct scmi_fc_db_info *db);
 };
 
diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h
index f2f05fb42d28..fafedb3b6604 100644
--- a/include/linux/scmi_protocol.h
+++ b/include/linux/scmi_protocol.h
@@ -128,6 +128,8 @@ struct scmi_perf_domain_info {
  * @level_set: sets the performance level of a domain
  * @level_get: gets the performance level of a domain
  * @transition_latency_get: gets the DVFS transition latency for a given device
+ * @rate_limit_get: gets the minimum time (us) required between successive
+ *	requests
  * @device_opps_add: adds all the OPPs for a given device
  * @freq_set: sets the frequency for a given device using sustained frequency
  *	to sustained performance level mapping
@@ -137,6 +139,8 @@ struct scmi_perf_domain_info {
  *	at a given frequency
  * @fast_switch_possible: indicates if fast DVFS switching is possible or not
  *	for a given device
+ * @fast_switch_rate_limit: gets the minimum time (us) required between
+ *	successive fast_switching requests
  * @power_scale_mw_get: indicates if the power values provided are in milliWatts
  *	or in some other (abstract) scale
  */
@@ -154,6 +158,8 @@ struct scmi_perf_proto_ops {
 			 u32 *level, bool poll);
 	int (*transition_latency_get)(const struct scmi_protocol_handle *ph,
 				      u32 domain);
+	int (*rate_limit_get)(const struct scmi_protocol_handle *ph,
+			      u32 domain, u32 *rate_limit);
 	int (*device_opps_add)(const struct scmi_protocol_handle *ph,
 			       struct device *dev, u32 domain);
 	int (*freq_set)(const struct scmi_protocol_handle *ph, u32 domain,
@@ -164,6 +170,8 @@ struct scmi_perf_proto_ops {
 			     unsigned long *rate, unsigned long *power);
 	bool (*fast_switch_possible)(const struct scmi_protocol_handle *ph,
 				     u32 domain);
+	int (*fast_switch_rate_limit)(const struct scmi_protocol_handle *ph,
+				      u32 domain, u32 *rate_limit);
 	enum scmi_power_scale (*power_scale_get)(const struct scmi_protocol_handle *ph);
 };