summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorSergei Shtylyov <sergei.shtylyov@cogentembedded.com>2013-03-31 09:50:07 +0000
committerDavid S. Miller <davem@davemloft.net>2013-03-31 19:42:33 -0400
commit1e1b812bbe1069fc8e2e372dca7d5f541c7a8ceb (patch)
tree70dd800eaa9af831acf96284c3bc7d13e562f581
parent14bc435ea54cb888409efb54fc6b76c13ef530e9 (diff)
downloadlwn-1e1b812bbe1069fc8e2e372dca7d5f541c7a8ceb.tar.gz
lwn-1e1b812bbe1069fc8e2e372dca7d5f541c7a8ceb.zip
sh_eth: fix handling of no LINK signal
The code handling the absent LINK signal (or the absent PSR register -- which reflects the state of this signal) is quite naive and has probably never really worked. It's probably enough to say that this code is executed only on the LINK change interrupt (sic!) but even if we actually have the signal and choose to ignore it (it might be connected to PHY's link/activity LED output as on the Renesas BOCK-W board), sh_eth_adjust_link() on which this code relies to update 'mdp->link' gets executed later than the LINK change interrupt where it is checked, and so RX/TX never get enabled via ECMR register. So, ignore the LINK changed interrupt iff LINK signal is absent (or just chosen not to be used) or PSR register is absent, and enable/disable RX/TX directly in sh_eth_adjust_link() in this case. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r--drivers/net/ethernet/renesas/sh_eth.c10
1 files changed, 6 insertions, 4 deletions
diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index bf5e3cf97c4d..1ca8b2b10adc 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -1216,10 +1216,7 @@ static void sh_eth_error(struct net_device *ndev, int intr_status)
if (felic_stat & ECSR_LCHNG) {
/* Link Changed */
if (mdp->cd->no_psr || mdp->no_ether_link) {
- if (mdp->link == PHY_DOWN)
- link_stat = 0;
- else
- link_stat = PHY_ST_LINK;
+ goto ignore_link;
} else {
link_stat = (sh_eth_read(ndev, PSR));
if (mdp->ether_link_active_low)
@@ -1242,6 +1239,7 @@ static void sh_eth_error(struct net_device *ndev, int intr_status)
}
}
+ignore_link:
if (intr_status & EESR_TWB) {
/* Write buck end. unused write back interrupt */
if (intr_status & EESR_TABT) /* Transmit Abort int */
@@ -1392,12 +1390,16 @@ static void sh_eth_adjust_link(struct net_device *ndev)
(sh_eth_read(ndev, ECMR) & ~ECMR_TXF), ECMR);
new_state = 1;
mdp->link = phydev->link;
+ if (mdp->cd->no_psr || mdp->no_ether_link)
+ sh_eth_rcv_snd_enable(ndev);
}
} else if (mdp->link) {
new_state = 1;
mdp->link = PHY_DOWN;
mdp->speed = 0;
mdp->duplex = -1;
+ if (mdp->cd->no_psr || mdp->no_ether_link)
+ sh_eth_rcv_snd_disable(ndev);
}
if (new_state && netif_msg_link(mdp))