Merge tag 'at91-ab-4.8-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt

DT Changes for 4.8:
 - New board: Olimex SAM9-L9260
 - Fix crystal definitions for Denx ma5d4
 - Remove leftover clock definitions
 - Add stdout-path for usb_a9260/a9g20

* tag 'at91-ab-4.8-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  ARM: dts: at91: calao: remove leftovers clock definition
  ARM: dts: at91: pm9g45: remove leftovers clock definition
  ARM: dts: at91: mpa1600: remove leftovers clock definition
  ARM: dts: at91: ge863-pro3: remove leftovers clock definition
  ARM: dts: at91: at91-foxg20: remove leftovers clock definition
  ARM: dts: at91: at91-cosino: remove leftovers clock definition
  ARM: dts: at91: at91-ariag25: remove leftovers clock definition
  ARM: dts: at91: animeo_ip: remove leftovers clock definition
  ARM: dts: at91: ma5d4: properly define crystals frequencies
  ARM: dts: at91: usb_a9g20: use stdout-path
  ARM: dts: at91: Add DT support for Olimex SAM9-L9260 board.
  ARM: dts: at91: at91sam9260: Remove leading zeros in OHCI node.

Signed-off-by: Olof Johansson <olof@lixom.net>

23 files changed, 139 insertions, 123 deletions

diff --git a/Documentation/devicetree/bindings/arm/olimex.txt b/Documentation/devicetree/bindings/arm/olimex.txt
index 007fb5c685a1..d726aeca56be 100644
--- a/Documentation/devicetree/bindings/arm/olimex.txt
+++ b/Documentation/devicetree/bindings/arm/olimex.txt
@@ -1,5 +1,9 @@
-Olimex i.MX Platforms Device Tree Bindings
-------------------------------------------
+Olimex Device Tree Bindings
+---------------------------
+
+SAM9-L9260 Board
+Required root node properties:
+    - compatible = "olimex,sam9-l9260", "atmel,at91sam9260";
 
 i.MX23 Olinuxino Low Cost Board
 Required root node properties:
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 9a1fc0d39180..e1888a2135f1 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -19,6 +19,7 @@ dtb-$(CONFIG_SOC_SAM_V4_V5) += \
 	usb_a9260.dtb \
 	at91sam9261ek.dtb \
 	at91sam9263ek.dtb \
+	at91-sam9_l9260.dtb \
 	tny_a9263.dtb \
 	usb_a9263.dtb \
 	at91-foxg20.dtb \
diff --git a/arch/arm/boot/dts/aks-cdu.dts b/arch/arm/boot/dts/aks-cdu.dts
index d9c50fbb49d2..5b1bf92d927c 100644
--- a/arch/arm/boot/dts/aks-cdu.dts
+++ b/arch/arm/boot/dts/aks-cdu.dts
@@ -57,7 +57,7 @@
 			};
 		};
 
-		usb0: ohci@00500000 {
+		usb0: ohci@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts
index 0962f2fa3f6e..9cc372b9fb9b 100644
--- a/arch/arm/boot/dts/animeo_ip.dts
+++ b/arch/arm/boot/dts/animeo_ip.dts
@@ -32,15 +32,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <18432000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -114,7 +105,7 @@
 			};
 		};
 
-		usb0: ohci@00500000 {
+		usb0: ohci@500000 {
 			num-ports = <2>;
 			atmel,vbus-gpio = <&pioB 15 GPIO_ACTIVE_LOW>;
 			status = "okay";
diff --git a/arch/arm/boot/dts/at91-ariag25.dts b/arch/arm/boot/dts/at91-ariag25.dts
index e9ced30159a7..f16a9b85a450 100644
--- a/arch/arm/boot/dts/at91-ariag25.dts
+++ b/arch/arm/boot/dts/at91-ariag25.dts
@@ -34,15 +34,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
diff --git a/arch/arm/boot/dts/at91-cosino.dtsi b/arch/arm/boot/dts/at91-cosino.dtsi
index b6ea3f4a7206..02d8ef43de3a 100644
--- a/arch/arm/boot/dts/at91-cosino.dtsi
+++ b/arch/arm/boot/dts/at91-cosino.dtsi
@@ -26,15 +26,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
diff --git a/arch/arm/boot/dts/at91-foxg20.dts b/arch/arm/boot/dts/at91-foxg20.dts
index 6bf873e7d96c..07c9bacf1ae6 100644
--- a/arch/arm/boot/dts/at91-foxg20.dts
+++ b/arch/arm/boot/dts/at91-foxg20.dts
@@ -23,15 +23,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <18432000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -128,7 +119,7 @@
 			};
 		};
 
-		usb0: ohci@00500000 {
+		usb0: ohci@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
index 229e989eb60d..0e3f34e084b5 100644
--- a/arch/arm/boot/dts/at91-kizbox.dts
+++ b/arch/arm/boot/dts/at91-kizbox.dts
@@ -54,7 +54,7 @@
 			};
 		};
 
-		usb0: ohci@00500000 {
+		usb0: ohci@500000 {
 			num-ports = <1>;
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/at91-qil_a9260.dts
index 4f2eebf4a560..5ad3d90f9d39 100644
--- a/arch/arm/boot/dts/at91-qil_a9260.dts
+++ b/arch/arm/boot/dts/at91-qil_a9260.dts
@@ -20,15 +20,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -111,7 +102,7 @@
 			};
 		};
 
-		usb0: ohci@00500000 {
+		usb0: ohci@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/at91-sam9_l9260.dts b/arch/arm/boot/dts/at91-sam9_l9260.dts
new file mode 100644
index 000000000000..349a46189bf1
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sam9_l9260.dts
@@ -0,0 +1,115 @@
+/*
+ * at91-sam9_l9260.dts - Device Tree file for Olimex SAM9-L9260 board
+ *
+ *  Copyright (C) 2016 Raashid Muhammed <raashidmuhammed@zilogic.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "at91sam9260.dtsi"
+
+/ {
+	model = "Olimex sam9-l9260";
+	compatible = "olimex,sam9-l9260", "atmel,at91sam9260", "atmel,at91sam9";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			mmc0: mmc@fffa8000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0
+					&pinctrl_mmc0_clk
+					&pinctrl_mmc0_slot1_cmd_dat0
+					&pinctrl_mmc0_slot1_dat1_3>;
+				status = "okay";
+
+				slot@1 {
+					reg = <1>;
+					bus-width = <4>;
+					cd-gpios = <&pioC 8 GPIO_ACTIVE_HIGH>;
+					wp-gpios = <&pioC 4 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "mii";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+				};
+			};
+
+			spi0: spi@fffc8000 {
+				cs-gpios = <&pioC 11 0>, <0>, <0>, <0>;
+				status = "okay";
+
+				flash@0 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <15000000>;
+					reg = <0>;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			pinctrl@fffff400 {
+				mmc0 {
+					pinctrl_board_mmc0: mmc0-board {
+						atmel,pins =
+							<AT91_PIOC 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH	/* CD pin */
+							 AT91_PIOC 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* WP pin */
+					};
+				};
+			};
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt = <1>;
+			status = "okay";
+		};
+
+		usb0: ohci@500000 {
+			status = "okay";
+		};
+
+	};
+
+	i2c@0 {
+		status = "okay";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		b0 {
+			label = "b0";
+			gpios = <&pioA 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
index e7b2109fc85a..99d57131782f 100644
--- a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
@@ -20,8 +20,11 @@
 	};
 
 	clocks {
-		main_clock: main_clock {
-			compatible = "atmel,osc", "fixed-clock";
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
 			clock-frequency = <12000000>;
 		};
 
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index d4884dd1c243..af5ba315315f 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -1007,7 +1007,7 @@
 			status = "disabled";
 		};
 
-		usb0: ohci@00500000 {
+		usb0: ohci@500000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00500000 0x100000>;
 			interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index e9cc99b6353a..1395b30adad6 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -170,7 +170,7 @@
 			};
 		};
 
-		usb0: ohci@00500000 {
+		usb0: ohci@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/ethernut5.dts b/arch/arm/boot/dts/ethernut5.dts
index 243044343ee8..298ee2fd2b51 100644
--- a/arch/arm/boot/dts/ethernut5.dts
+++ b/arch/arm/boot/dts/ethernut5.dts
@@ -77,7 +77,7 @@
 			};
 		};
 
-		usb0: ohci@00500000 {
+		usb0: ohci@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/evk-pro3.dts b/arch/arm/boot/dts/evk-pro3.dts
index f72969efe6d7..312d3e80b538 100644
--- a/arch/arm/boot/dts/evk-pro3.dts
+++ b/arch/arm/boot/dts/evk-pro3.dts
@@ -46,7 +46,7 @@
 			};
 		};
 
-		usb0: ohci@00500000 {
+		usb0: ohci@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/ge863-pro3.dtsi b/arch/arm/boot/dts/ge863-pro3.dtsi
index 0d0e62489d93..4aee5cc75fa4 100644
--- a/arch/arm/boot/dts/ge863-pro3.dtsi
+++ b/arch/arm/boot/dts/ge863-pro3.dtsi
@@ -11,15 +11,6 @@
 
 / {
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <6000000>;
-		};
-
 		main_xtal {
 			clock-frequency = <6000000>;
 		};
diff --git a/arch/arm/boot/dts/mpa1600.dts b/arch/arm/boot/dts/mpa1600.dts
index f0f5e1098928..30e66e57870c 100644
--- a/arch/arm/boot/dts/mpa1600.dts
+++ b/arch/arm/boot/dts/mpa1600.dts
@@ -17,15 +17,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <18432000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
diff --git a/arch/arm/boot/dts/pm9g45.dts b/arch/arm/boot/dts/pm9g45.dts
index 66afcff67fde..0abd7bf17568 100644
--- a/arch/arm/boot/dts/pm9g45.dts
+++ b/arch/arm/boot/dts/pm9g45.dts
@@ -21,15 +21,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-
 		slow_xtal {
 		      clock-frequency = <32768>;
 		};
diff --git a/arch/arm/boot/dts/tny_a9260_common.dtsi b/arch/arm/boot/dts/tny_a9260_common.dtsi
index ce7138c3af1b..f9dc463b9e48 100644
--- a/arch/arm/boot/dts/tny_a9260_common.dtsi
+++ b/arch/arm/boot/dts/tny_a9260_common.dtsi
@@ -16,15 +16,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
diff --git a/arch/arm/boot/dts/tny_a9263.dts b/arch/arm/boot/dts/tny_a9263.dts
index 3043296345b7..2f39f85158f7 100644
--- a/arch/arm/boot/dts/tny_a9263.dts
+++ b/arch/arm/boot/dts/tny_a9263.dts
@@ -21,15 +21,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
diff --git a/arch/arm/boot/dts/usb_a9260_common.dtsi b/arch/arm/boot/dts/usb_a9260_common.dtsi
index 9beea8976584..0f3a02b336a2 100644
--- a/arch/arm/boot/dts/usb_a9260_common.dtsi
+++ b/arch/arm/boot/dts/usb_a9260_common.dtsi
@@ -8,15 +8,6 @@
 
 / {
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -90,7 +81,7 @@
 			};
 		};
 
-		usb0: ohci@00500000 {
+		usb0: ohci@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts
index 8cc6edb29694..94c615072f3b 100644
--- a/arch/arm/boot/dts/usb_a9263.dts
+++ b/arch/arm/boot/dts/usb_a9263.dts
@@ -21,15 +21,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
diff --git a/arch/arm/boot/dts/usb_a9g20_common.dtsi b/arch/arm/boot/dts/usb_a9g20_common.dtsi
index 0b3b36182fe5..6156ee878345 100644
--- a/arch/arm/boot/dts/usb_a9g20_common.dtsi
+++ b/arch/arm/boot/dts/usb_a9g20_common.dtsi
@@ -11,7 +11,8 @@
 
 / {
 	chosen {
-		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
+		bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {