//
// Copyright(c) by Benny Sjostrand (benny@hostmobility.com)
//
// This program is free software; you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation; either version 2 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program; if not, write to the Free Software
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
//
//
// This code runs inside the DSP (cs4610, cs4612, cs4624, or cs4630),
// to compile it you need a tool named SPASM 3.0 and DSP code owned by
// Cirrus Logic(R). The SPASM program will generate a object file (cwcdma.osp),
// the "ospparser" tool will genereate the cwcdma.h file it's included from
// the cs46xx_lib.c file.
//
//
// The purpose of this code is very simple: make it possible to tranfser
// the samples 'as they are' with no alteration from a PCMreader SCB (DMA from host)
// to any other SCB. This is useful for AC3 throug SPDIF. SRC (source rate converters)
// task always alters the samples in some how, however it's from 48khz -> 48khz. The
// alterations are not audible, but AC3 wont work.
//
// ...
// |
// +---------------+
// | AsynchFGTxSCB |
// +---------------+
// |
// subListPtr
// |
// +--------------+
// | DMAReader |
// +--------------+
// |
// subListPtr
// |
// +-------------+
// | PCMReader |
// +-------------+
// (DMA from host)
//
struct dmaSCB
{
long dma_reserved1[3];
short dma_reserved2:dma_outBufPtr;
short dma_unused1:dma_unused2;
long dma_reserved3[4];
short dma_subListPtr:dma_nextSCB;
short dma_SPBptr:dma_entryPoint;
long dma_strmRsConfig;
long dma_strmBufPtr;
long dma_reserved4;
VolumeControl s2m_volume;
};
#export DMAReader
void DMAReader()
{
execChild();
r2 = r0->dma_subListPtr;
r1 = r0->nextSCB;
rsConfig01 = r2->strmRsConfig;
// Load rsConfig for input buffer
rsDMA01 = r2->basicReq.daw, , tb = Z(0 - rf);
// Load rsDMA in case input buffer is a DMA buffer Test to see if there is any data to transfer
if (tb) goto execSibling_2ind1 after {
r5 = rf + (-1);
r6 = r1->dma_entryPoint; // r6 = entry point of sibling task
r1 = r1->dma_SPBptr, // r1 = pointer to sibling task's SPB
, ind = r6; // Load entry point of sibling task
}
rsConfig23 = r0->dma_strmRsConfig;
// Load rsConfig for output buffer (never a DMA buffer)
r4 = r0->dma_outBufPtr;
rsa0 = r2->strmBufPtr;
// rsa0 = input buffer pointer
for (i = r5; i >= 0; --i)
after {
rsa2 = r4;
// rsa2 = output buffer pointer
nop;
nop;
}
//*****************************
// TODO: cycles to this point *
//*****************************
{
acc0 = (rsd0 = *rsa0++1);
// get sample
nop; // Those "nop"'s are really uggly, but there's
nop; // something with DSP's pipelines which I don't
nop; // understand, resulting this code to fail without
// having those "nop"'s (Benny)
rsa0?reqDMA = r2;
// Trigger DMA transfer on input stream,
// if needed to replenish input buffer
nop;
// Yet another magic "nop" to make stuff work
,,r98 = acc0 $+>> 0;
// store sample in ALU
nop;
// latency on load register.
// (this one is understandable)
*rsa2++1 = r98;
// store sample in output buffer
nop; // The same story
nop; // as above again ...
nop;
}
// TODO: cycles per loop iteration
r2->strmBufPtr = rsa0,, ;
// Update the modified buffer pointers
r4 = rsa2;
// Load output pointer position into r4
r2 = r0->nextSCB;
// Sibling task
goto execSibling_2ind1 // takes 6 cycles
after {
r98 = r2->thisSPB:entryPoint;
// Load child routine entry and data address
r1 = r9;
// r9 is r2->thisSPB
r0->dma_outBufPtr = r4,,
// Store updated output buffer pointer
ind = r8;
// r8 is r2->entryPoint
}
}
