/*
* linux/include/linux/serial_8250.h
*
* Copyright (C) 2004 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef _LINUX_SERIAL_8250_H
#define _LINUX_SERIAL_8250_H
#include <linux/serial_core.h>
#include <linux/platform_device.h>
/*
* This is the platform device platform_data structure
*/
struct plat_serial8250_port {
unsigned long iobase; /* io base address */
void __iomem *membase; /* ioremap cookie or NULL */
resource_size_t mapbase; /* resource base */
unsigned int irq; /* interrupt number */
unsigned long irqflags; /* request_irq flags */
unsigned int uartclk; /* UART clock rate */
void *private_data;
unsigned char regshift; /* register shift */
unsigned char iotype; /* UPIO_* */
unsigned char hub6;
upf_t flags; /* UPF_* flags */
unsigned int type; /* If UPF_FIXED_TYPE */
unsigned int (*serial_in)(struct uart_port *, int);
void (*serial_out)(struct uart_port *, int, int);
void (*set_termios)(struct uart_port *,
struct ktermios *new,
struct ktermios *old);
int (*handle_irq)(struct uart_port *);
void (*pm)(struct uart_port *, unsigned int state,
unsigned old);
void (*handle_break)(struct uart_port *);
};
/*
* Allocate 8250 platform device IDs. Nothing is implied by
* the numbering here, except for the legacy entry being -1.
*/
enum {
PLAT8250_DEV_LEGACY = -1,
PLAT8250_DEV_PLATFORM,
PLAT8250_DEV_PLATFORM1,
PLAT8250_DEV_PLATFORM2,
PLAT8250_DEV_FOURPORT,
PLAT8250_DEV_ACCENT,
PLAT8250_DEV_BOCA,
PLAT8250_DEV_EXAR_ST16C554,
PLAT8250_DEV_HUB6,
PLAT8250_DEV_AU1X00,
PLAT8250_DEV_SM501,
};
struct uart_8250_dma;
struct uart_8250_port;
/**
* 8250 core driver operations
*
* @setup_irq() Setup irq handling. The universal 8250 driver links this
* port to the irq chain. Other drivers may @request_irq().
* @release_irq() Undo irq handling. The universal 8250 driver unlinks
* the port from the irq chain.
*/
struct uart_8250_ops {
int (*setup_irq)(struct uart_8250_port *);
void (*release_irq)(struct uart_8250_port *);
};
/*
* This should be used by drivers which want to register
* their own 8250 ports without registering their own
* platform device. Using these will make your driver
* dependent on the 8250 driver.
*/
struct uart_8250_port {
struct uart_port port;
struct timer_list timer; /* "no irq" timer */
struct list_head list; /* ports on this IRQ */
unsigned short capabilities; /* port capabilities */
unsigned short bugs; /* port bugs */
bool fifo_bug; /* min RX trigger if enabled */
unsigned int tx_loadsz; /* transmit fifo load size */
unsigned char acr;
unsigned char fcr;
unsigned char ier;
unsigned char lcr;
unsigned char mcr;
unsigned char mcr_mask; /* mask of user bits */
unsigned char mcr_force; /* mask of forced bits */
unsigned char cur_iotype; /* Running I/O type */
unsigned int rpm_tx_active;
unsigned char canary; /* non-zero during system sleep
* if no_console_suspend
*/
/*
* Some bits in registers are cleared on a read, so they must
* be saved whenever the register is read but the bits will not
* be immediately processed.
*/
#define LSR_SAVE_FLAGS UART_LSR_BRK_ERROR_BITS
unsigned char lsr_saved_flags;
#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA
unsigned char msr_saved_flags;
struct uart_8250_dma *dma;
const struct uart_8250_ops *ops;
/* 8250 specific callbacks */
int (*dl_read)(struct uart_8250_port *);
void (*dl_write)(struct uart_8250_port *, int);
};
static inline struct uart_8250_port *up_to_u8250p(struct uart_port *up)
{
return container_of(up, struct uart_8250_port, port);
}
int serial8250_register_8250_port(struct uart_8250_port *);
void serial8250_unregister_port(int line);
void serial8250_suspend_port(int line);
void serial8250_resume_port(int line);
extern int early_serial_setup(struct uart_port *port);
extern unsigned int serial8250_early_in(struct uart_port *port, int offset);
extern void serial8250_early_out(struct uart_port *port, int offset, int value);
extern void serial8250_do_set_termios(struct uart_port *port,
struct ktermios *termios, struct ktermios *old);
extern int serial8250_do_startup(struct uart_port *port);
extern void serial8250_do_shutdown(struct uart_port *port);
extern void serial8250_do_pm(struct uart_port *port, unsigned int state,
unsigned int oldstate);
extern void serial8250_do_set_mctrl(struct uart_port *port, unsigned int mctrl);
extern int fsl8250_handle_irq(struct uart_port *port);
int serial8250_handle_irq(struct uart_port *port, unsigned int iir);
unsigned char serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr);
void serial8250_tx_chars(struct uart_8250_port *up);
unsigned int serial8250_modem_status(struct uart_8250_port *up);
extern void serial8250_set_isa_configurator(void (*v)
(int port, struct uart_port *up,
unsigned short *capabilities));
#endif
