/* SPDX-License-Identifier: GPL-2.0+ */
/*
* ipmi_smi.h
*
* MontaVista IPMI system management interface
*
* Author: MontaVista Software, Inc.
* Corey Minyard <minyard@mvista.com>
* source@mvista.com
*
* Copyright 2002 MontaVista Software Inc.
*
*/
#ifndef __LINUX_IPMI_SMI_H
#define __LINUX_IPMI_SMI_H
#include <linux/ipmi_msgdefs.h>
#include <linux/proc_fs.h>
#include <linux/platform_device.h>
#include <linux/ipmi.h>
struct device;
/*
* This files describes the interface for IPMI system management interface
* drivers to bind into the IPMI message handler.
*/
/* Structure for the low-level drivers. */
struct ipmi_smi;
/*
* Flags for set_check_watch() below. Tells if the SMI should be
* waiting for watchdog timeouts, commands and/or messages.
*/
#define IPMI_WATCH_MASK_CHECK_MESSAGES (1 << 0)
#define IPMI_WATCH_MASK_CHECK_WATCHDOG (1 << 1)
#define IPMI_WATCH_MASK_CHECK_COMMANDS (1 << 2)
/*
* Messages to/from the lower layer. The smi interface will take one
* of these to send. After the send has occurred and a response has
* been received, it will report this same data structure back up to
* the upper layer. If an error occurs, it should fill in the
* response with an error code in the completion code location. When
* asynchronous data is received, one of these is allocated, the
* data_size is set to zero and the response holds the data from the
* get message or get event command that the interface initiated.
* Note that it is the interfaces responsibility to detect
* asynchronous data and messages and request them from the
* interface.
*/
struct ipmi_smi_msg {
struct list_head link;
long msgid;
void *user_data;
int data_size;
unsigned char data[IPMI_MAX_MSG_LENGTH];
int rsp_size;
unsigned char rsp[IPMI_MAX_MSG_LENGTH];
/*
* Will be called when the system is done with the message
* (presumably to free it).
*/
void (*done)(struct ipmi_smi_msg *msg);
};
struct ipmi_smi_handlers {
struct module *owner;
/*
* The low-level interface cannot start sending messages to
* the upper layer until this function is called. This may
* not be NULL, the lower layer must take the interface from
* this call.
*/
int (*start_processing)(void *send_info,
struct ipmi_smi *new_intf);
/*
* When called, the low-level interface should disable all
* processing, it should be complete shut down when it returns.
*/
void (*shutdown)(void *send_info);
/*
* Get the detailed private info of the low level interface and store
* it into the structure of ipmi_smi_data. For example: the
* ACPI device handle will be returned for the pnp_acpi IPMI device.
*/
int (*get_smi_info)(void *send_info, struct ipmi_smi_info *data);
/*
* Called to enqueue an SMI message to be sent. This
* operation is not allowed to fail. If an error occurs, it
* should report back the error in a received message. It may
* do this in the current call context, since no write locks
* are held when this is run. Message are delivered one at
* a time by the message handler, a new message will not be
* delivered until the previous message is returned.
*/
void (*sender)(void *send_info,
struct ipmi_smi_msg *msg);
/*
* Called by the upper layer to request that we try to get
* events from the BMC we are attached to.
*/
void (*request_events)(void *send_info);
/*
* Called by the upper layer when some user requires that the
* interface watch for received messages and watchdog
* pretimeouts (basically do a "Get Flags", or not. Used by
* the SMI to know if it should watch for these. This may be
* NULL if the SMI does not implement it. watch_mask is from
* IPMI_WATCH_MASK_xxx above. The interface should run slower
* timeouts for just watchdog checking or faster timeouts when
* waiting for the message queue.
*/
void (*set_need_watch)(void *send_info, unsigned int watch_mask);
/*
* Called when flushing all pending messages.
*/
void (*flush_messages)(void *send_info);
/*
* Called when the interface should go into "run to
* completion" mode. If this call sets the value to true, the
* interface should make sure that all messages are flushed
* out and that none are pending, and any new requests are run
* to completion immediately.
*/
void (*set_run_to_completion)(void *send_info, bool run_to_completion);
/*
* Called to poll for work to do. This is so upper layers can
* poll for operations during things like crash dumps.
*/
void (*poll)(void *send_info);
/*
* Enable/disable firmware maintenance mode. Note that this
* is *not* the modes defined, this is simply an on/off
* setting. The message handler does the mode handling. Note
* that this is called from interrupt context, so it cannot
* block.
*/
void (*set_maintenance_mode)(void *send_info, bool enable);
};
struct ipmi_device_id {
unsigned char device_id;
unsigned char device_revision;
unsigned char firmware_revision_1;
unsigned char firmware_revision_2;
unsigned char ipmi_version;
unsigned char additional_device_support;
unsigned int manufacturer_id;
unsigned int product_id;
unsigned char aux_firmware_revision[4];
unsigned int aux_firmware_revision_set : 1;
};
#define ipmi_version_major(v) ((v)->ipmi_version & 0xf)
#define ipmi_version_minor(v) ((v)->ipmi_version >> 4)
/*
* Take a pointer to an IPMI response and extract device id information from
* it. @netfn is in the IPMI_NETFN_ format, so may need to be shifted from
* a SI response.
*/
static inline int ipmi_demangle_device_id(uint8_t netfn, uint8_t cmd,
const unsigned char *data,
unsigned int data_len,
struct ipmi_device_id *id)
{
if (data_len < 7)
return -EINVAL;
if (netfn != IPMI_NETFN_APP_RESPONSE || cmd != IPMI_GET_DEVICE_ID_CMD)
/* Strange, didn't get the response we expected. */
return -EINVAL;
if (data[0] != 0)
/* That's odd, it shouldn't be able to fail. */
return -EINVAL;
data++;
data_len--;
id->device_id = data[0];
id->device_revision = data[1];
id->firmware_revision_1 = data[2];
id->firmware_revision_2 = data[3];
id->ipmi_version = data[4];
id->additional_device_support = data[5];
if (data_len >= 11) {
id->manufacturer_id = (data[6] | (data[7] << 8) |
(data[8] << 16));
id->product_id = data[9] | (data[10] << 8);
} else {
id->manufacturer_id = 0;
id->product_id = 0;
}
if (data_len >= 15) {
memcpy(id->aux_firmware_revision, data+11, 4);
id->aux_firmware_revision_set = 1;
} else
id->aux_firmware_revision_set = 0;
return 0;
}
/*
* Add a low-level interface to the IPMI driver. Note that if the
* interface doesn't know its slave address, it should pass in zero.
* The low-level interface should not deliver any messages to the
* upper layer until the start_processing() function in the handlers
* is called, and the lower layer must get the interface from that
* call.
*/
int ipmi_add_smi(struct module *owner,
const struct ipmi_smi_handlers *handlers,
void *send_info,
struct device *dev,
unsigned char slave_addr);
#define ipmi_register_smi(handlers, send_info, dev, slave_addr) \
ipmi_add_smi(THIS_MODULE, handlers, send_info, dev, slave_addr)
/*
* Remove a low-level interface from the IPMI driver. This will
* return an error if the interface is still in use by a user.
*/
void ipmi_unregister_smi(struct ipmi_smi *intf);
/*
* The lower layer reports received messages through this interface.
* The data_size should be zero if this is an asynchronous message. If
* the lower layer gets an error sending a message, it should format
* an error response in the message response.
*/
void ipmi_smi_msg_received(struct ipmi_smi *intf,
struct ipmi_smi_msg *msg);
/* The lower layer received a watchdog pre-timeout on interface. */
void ipmi_smi_watchdog_pretimeout(struct ipmi_smi *intf);
struct ipmi_smi_msg *ipmi_alloc_smi_msg(void);
static inline void ipmi_free_smi_msg(struct ipmi_smi_msg *msg)
{
msg->done(msg);
}
#endif /* __LINUX_IPMI_SMI_H */
