/*
SCSI Tape Driver for Linux version 1.1 and newer. See the accompanying
file Documentation/scsi/st.txt for more information.
History:
OnStream SCSI Tape support (osst) cloned from st.c by
Willem Riede (osst@riede.org) Feb 2000
Fixes ... Kurt Garloff <garloff@suse.de> Mar 2000
Rewritten from Dwayne Forsyth's SCSI tape driver by Kai Makisara.
Contribution and ideas from several people including (in alphabetical
order) Klaus Ehrenfried, Wolfgang Denk, Steve Hirsch, Andreas Koppenh"ofer,
Michael Leodolter, Eyal Lebedinsky, J"org Weule, and Eric Youngdale.
Copyright 1992 - 2002 Kai Makisara / 2000 - 2006 Willem Riede
email osst@riede.org
$Header: /cvsroot/osst/Driver/osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
Microscopic alterations - Rik Ling, 2000/12/21
Last st.c sync: Tue Oct 15 22:01:04 2002 by makisara
Some small formal changes - aeb, 950809
*/
static const char * cvsid = "$Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $";
static const char * osst_version = "0.99.4";
/* The "failure to reconnect" firmware bug */
#define OSST_FW_NEED_POLL_MIN 10601 /*(107A)*/
#define OSST_FW_NEED_POLL_MAX 10704 /*(108D)*/
#define OSST_FW_NEED_POLL(x,d) ((x) >= OSST_FW_NEED_POLL_MIN && (x) <= OSST_FW_NEED_POLL_MAX && d->host->this_id != 7)
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/proc_fs.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/mtio.h>
#include <linux/ioctl.h>
#include <linux/fcntl.h>
#include <linux/spinlock.h>
#include <linux/vmalloc.h>
#include <linux/blkdev.h>
#include <linux/moduleparam.h>
#include <linux/delay.h>
#include <linux/jiffies.h>
#include <linux/smp_lock.h>
#include <asm/uaccess.h>
#include <asm/dma.h>
#include <asm/system.h>
/* The driver prints some debugging information on the console if DEBUG
is defined and non-zero. */
#define DEBUG 0
/* The message level for the debug messages is currently set to KERN_NOTICE
so that people can easily see the messages. Later when the debugging messages
in the drivers are more widely classified, this may be changed to KERN_DEBUG. */
#define OSST_DEB_MSG KERN_NOTICE
#include <scsi/scsi.h>
#include <scsi/scsi_dbg.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_driver.h>
#include <scsi/scsi_eh.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_ioctl.h>
#define ST_KILOBYTE 1024
#include "st.h"
#include "osst.h"
#include "osst_options.h"
#include "osst_detect.h"
static int max_dev = 0;
static int write_threshold_kbs = 0;
static int max_sg_segs = 0;
#ifdef MODULE
MODULE_AUTHOR("Willem Riede");
MODULE_DESCRIPTION("OnStream {DI-|FW-|SC-|USB}{30|50} Tape Driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS_CHARDEV_MAJOR(OSST_MAJOR);
MODULE_ALIAS_SCSI_DEVICE(TYPE_TAPE);
module_param(max_dev, int, 0444);
MODULE_PARM_DESC(max_dev, "Maximum number of OnStream Tape Drives to attach (4)");
module_param(write_threshold_kbs, int, 0644);
MODULE_PARM_DESC(write_threshold_kbs, "Asynchronous write threshold (KB; 32)");
module_param(max_sg_segs, int, 0644);
MODULE_PARM_DESC(max_sg_segs, "Maximum number of scatter/gather segments to use (9)");
#else
static struct osst_dev_parm {
char *name;
int *val;
} parms[] __initdata = {
{ "max_dev", &max_dev },
{ "write_threshold_kbs", &write_threshold_kbs },
{ "max_sg_segs", &max_sg_segs }
};
#endif
/* Some default definitions have been moved to osst_options.h */
#define OSST_BUFFER_SIZE (OSST_BUFFER_BLOCKS * ST_KILOBYTE)
#define OSST_WRITE_THRESHOLD (OSST_WRITE_THRESHOLD_BLOCKS * ST_KILOBYTE)
/* The buffer size should fit into the 24 bits for length in the
6-byte SCSI read and write commands. */
#if OSST_BUFFER_SIZE >= (2 << 24 - 1)
#error "Buffer size should not exceed (2 << 24 - 1) bytes!"
#endif
#if DEBUG
static int debugging = 1;
/* uncomment define below to test error recovery */
// #define OSST_INJECT_ERRORS 1
#endif
/* Do not retry! The drive firmware already retries when appropriate,
and when it tries to tell us something, we had better listen... */
#define MAX_RETRIES 0
#define NO_TAPE NOT_READY
#define OSST_WAIT_POSITION_COMPLETE (HZ > 200 ? HZ / 200 : 1)
#define OSST_WAIT_WRITE_COMPLETE (HZ / 12)
#define OSST_WAIT_LONG_WRITE_COMPLETE (HZ / 2)
#define OSST_TIMEOUT (200 * HZ)
#define OSST_LONG_TIMEOUT (1800 * HZ)
#define TAPE_NR(x) (iminor(x) & ~(-1 << ST_MODE_SHIFT))
#define TAPE_MODE(x) ((iminor(x) & ST_MODE_MASK) >> ST_MODE_SHIFT)
#define TAPE_REWIND(x) ((iminor(x) & 0x80) == 0)
#define TAPE_IS_RAW(x) (TAPE_MODE(x) & (ST_NBR_MODES >> 1))
/* Internal ioctl to set both density (uppermost 8 bits) and blocksize (lower
24 bits) */
#define SET_DENS_AND_BLK 0x10001
static int osst_buffer_size = OSST_BUFFER_SIZE;
static int osst_write_threshold = OSST_WRITE_THRESHOLD;
static int osst_max_sg_segs = OSST_MAX_SG;
static int osst_max_dev = OSST_MAX_TAPES;
static int osst_nr_dev;
static struct osst_tape **os_scsi_tapes = NULL;
static DEFINE_RWLOCK(os_scsi_tapes_lock);
static int modes_defined = 0;
static struct osst_buffer *new_tape_buffer(int, int, int);
static int enlarge_buffer(struct osst_buffer *, int);
static void normalize_buffer(struct osst_buffer *);
static int append_to_buffer(const char __user *, struct osst_buffer *, int);
static int from_buffer(struct osst_buffer *, char __user *, int);
static int osst_zero_buffer_tail(struct osst_buffer *);
static int osst_copy_to_buffer(struct osst_buffer *, unsigned char *);
static int osst_copy_from_buffer(struct osst_buffer *, unsigned char *);
static int osst_probe(struct device *);
static int osst_remove(struct device *);
static struct scsi_driver osst_template = {
.owner = THIS_MODULE,
.gendrv = {
.name = "osst",
.probe = osst_probe,
.remove = osst_remove,
}
};
static int osst_int_ioctl(struct osst_tape *STp, struct osst_request ** aSRpnt,
unsigned int cmd_in, unsigned long arg);
static int osst_set_frame_position(struct osst_tape *STp, struct osst_request ** aSRpnt, int frame, int skip);
static int osst_get_frame_position(struct osst_tape *STp, struct osst_request ** aSRpnt);
static int osst_flush_write_buffer(struct osst_tape *STp, struct osst_request ** aSRpnt);
static int osst_write_error_recovery(struct osst_tape * STp, struct osst_request ** aSRpnt, int pending);
static inline char *tape_name(struct osst_tape *tape)
{
return tape->drive->disk_name;
}
/* Routines that handle the interaction with mid-layer SCSI routines */
/* Normalize Sense */
static void osst_analyze_sense(struct osst_request *SRpnt, struct st_cmdstatus *s)
{
const u8 *ucp;
const u8 *sense = SRpnt->sense;
s->have_sense = scsi_normalize_sense(SRpnt->sense,
SCSI_SENSE_BUFFERSIZE, &s->sense_hdr);
s->flags = 0;
if (s->have_sense) {
s->deferred = 0;
s->remainder_valid =
scsi_get_sense_info_fld(sense, SCSI_SENSE_BUFFERSIZE, &s->uremainder64);
switch (sense[0] & 0x7f) {
case 0x71:
s->deferred = 1;
case 0x70:
s->fixed_format = 1;
s->flags = sense[2] & 0xe0;
break;
case 0x73:
s->deferred = 1;
case 0x72:
s->fixed_format = 0;
ucp = scsi_sense_desc_find(sense, SCSI_SENSE_BUFFERSIZE, 4);
s->flags = ucp ? (ucp[3] & 0xe0) : 0;
break;
}
}
}
/* Convert the result to success code */
static int osst_chk_result(struct osst_tape * STp, struct osst_request * SRpnt)
{
char *name = tape_name(STp);
int result = SRpnt->result;
u8 * sense = SRpnt->sense, scode;
#if DEBUG
const char *stp;
#endif
struct st_cmdstatus *cmdstatp;
if (!result)
return 0;
cmdstatp = &STp->buffer->cmdstat;
osst_analyze_sense(SRpnt, cmdstatp);
if (cmdstatp->have_sense)
scode = STp->buffer->cmdstat.sense_hdr.sense_key;
else
scode = 0;
#if DEBUG
if (debugging) {
printk(OSST_DEB_MSG "%s:D: Error: %x, cmd: %x %x %x %x %x %x\n",
name, result,
SRpnt->cmd[0], SRpnt->cmd[1], SRpnt->cmd[2],
SRpnt->cmd[3], SRpnt->cmd[4], SRpnt->cmd[5]);
if (scode) printk(OSST_DEB_MSG "%s:D: Sense: %02x, ASC: %02x, ASCQ: %02x\n",
name, scode, sense[12], sense[13]);
if (cmdstatp->have_sense)
__scsi_print_sense("osst ", SRpnt->sense, SCSI_SENSE_BUFFERSIZE);
}
else
#endif
if (cmdstatp->have_sense && (
scode != NO_SENSE &&
scode != RECOVERED_ERROR &&
/* scode != UNIT_ATTENTION && */
scode != BLANK_CHECK &&
scode != VOLUME_OVERFLOW &&
SRpnt->cmd[0] != MODE_SENSE &&
SRpnt->cmd[0] != TEST_UNIT_READY)) { /* Abnormal conditions for tape */
if (cmdstatp->have_sense) {
printk(KERN_WARNING "%s:W: Command with sense data:\n", name);
__scsi_print_sense("osst ", SRpnt->sense, SCSI_SENSE_BUFFERSIZE);
}
else {
static int notyetprinted = 1;
printk(KERN_WARNING
"%s:W: Warning %x (driver bt 0x%x, host bt 0x%x).\n",
name, result, driver_byte(result),
host_byte(result));
if (notyetprinted) {
notyetprinted = 0;
printk(KERN_INFO
"%s:I: This warning may be caused by your scsi controller,\n", name);
printk(KERN_INFO
"%s:I: it has been reported with some Buslogic cards.\n", name);
}
}
}
STp->pos_unknown |= STp->device->was_reset;
if (cmdstatp->have_sense && scode == RECOVERED_ERROR) {
STp->recover_count++;
STp->recover_erreg++;
#if DEBUG
if (debugging) {
if (SRpnt->cmd[0] == READ_6)
stp = "read";
else if (SRpnt->cmd[0] == WRITE_6)
stp = "write";
else
stp = "ioctl";
printk(OSST_DEB_MSG "%s:D: Recovered %s error (%d).\n", name, stp,
STp->recover_count);
}
#endif
if ((sense[2] & 0xe0) == 0)
return 0;
}
return (-EIO);
}
/* Wakeup from interrupt */
static void osst_end_async(struct request *req, int update)
{
struct osst_request *SRpnt = req->end_io_data;
struct osst_tape *STp = SRpnt->stp;
struct rq_map_data *mdata = &SRpnt->stp->buffer->map_data;
STp->buffer->cmdstat.midlevel_result = SRpnt->result = req->errors;
#if DEBUG
STp->write_pending = 0;
#endif
if (SRpnt->waiting)
complete(SRpnt->waiting);
if (SRpnt->bio) {
kfree(mdata->pages);
blk_rq_unmap_user(SRpnt->bio);
}
__blk_put_request(req->q, req);
}
/* osst_request memory management */
static struct osst_request *osst_allocate_request(void)
{
return kzalloc(sizeof(struct osst_request), GFP_KERNEL);
}
static void osst_release_request(struct osst_request *streq)
{
kfree(streq);
}
static int osst_execute(struct osst_request *SRpnt, const unsigned char *cmd,
int cmd_len, int data_direction, void *buffer, unsigned bufflen,
int use_sg, int timeout, int retries)
{
struct request *req;
struct page **pages = NULL;
struct rq_map_data *mdata = &SRpnt->stp->buffer->map_data;
int err = 0;
int write = (data_direction == DMA_TO_DEVICE);
req = blk_get_request(SRpnt->stp->device->request_queue, write, GFP_KERNEL);
if (!req)
return DRIVER_ERROR << 24;
req->cmd_type = REQ_TYPE_BLOCK_PC;
req->cmd_flags |= REQ_QUIET;
SRpnt->bio = NULL;
if (use_sg) {
struct scatterlist *sg, *sgl = (struct scatterlist *)buffer;
int i;
pages = kzalloc(use_sg * sizeof(struct page *), GFP_KERNEL);
if (!pages)
goto free_req;
for_each_sg(sgl, sg, use_sg, i)
pages[i] = sg_page(sg);
mdata->null_mapped = 1;
mdata->page_order = get_order(sgl[0].length);
mdata->nr_entries =
DIV_ROUND_UP(bufflen, PAGE_SIZE << mdata->page_order);
mdata->offset = 0;
err = blk_rq_map_user(req->q, req, mdata, NULL, bufflen, GFP_KERNEL);
if (err) {
kfree(pages);
goto free_req;
}
SRpnt->bio = req->bio;
mdata->pages = pages;
} else if (bufflen) {
err = blk_rq_map_kern(req->q, req, buffer, bufflen, GFP_KERNEL);
if (err)
goto free_req;
}
req->cmd_len = cmd_len;
memset(req->cmd, 0, BLK_MAX_CDB); /* ATAPI hates garbage after CDB */
memcpy(req->cmd, cmd, req->cmd_len);
req->sense = SRpnt->sense;
req->sense_len = 0;
req->timeout = timeout;
req->retries = retries;
req->end_io_data = SRpnt;
blk_execute_rq_nowait(req->q, NULL, req, 1, osst_end_async);
return 0;
free_req:
blk_put_request(req);
return DRIVER_ERROR << 24;
}
/* Do the scsi command. Waits until command performed if do_wait is true.
Otherwise osst_write_behind_check() is used to check that the command
has finished. */
static struct osst_request * osst_do_scsi(struct osst_request *SRpnt, struct osst_tape *STp,
unsigned char *cmd, int bytes, int direction, int timeout, int retries, int do_wait)
{
unsigned char *bp;
unsigned short use_sg;
#ifdef OSST_INJECT_ERRORS
static int inject = 0;
static int repeat = 0;
#endif
struct completion *waiting;
/* if async, make sure there's no command outstanding */
if (!do_wait && ((STp->buffer)->last_SRpnt)) {
printk(KERN_ERR "%s: Async command already active.\n",
tape_name(STp));
if (signal_pending(current))
(STp->buffer)->syscall_result = (-EINTR);
else
(STp->buffer)->syscall_result = (-EBUSY);
return NULL;
}
if (SRpnt == NULL) {
SRpnt = osst_allocate_request();
if (SRpnt == NULL) {
printk(KERN_ERR "%s: Can't allocate SCSI request.\n",
tape_name(STp));
if (signal_pending(current))
(STp->buffer)->syscall_result = (-EINTR);
else
(STp->buffer)->syscall_result = (-EBUSY);
return NULL;
}
SRpnt->stp = STp;
}
/* If async IO, set last_SRpnt. This ptr tells write_behind_check
which IO is outstanding. It's nulled out when the IO completes. */
if (!do_wait)
(STp->buffer)->last_SRpnt = SRpnt;
waiting = &STp->wait;
init_completion(waiting);
SRpnt->waiting = waiting;
use_sg = (bytes > STp->buffer->sg[0].length) ? STp->buffer->use_sg : 0;
if (use_sg) {
bp = (char *)&(STp->buffer->sg[0]);
if (STp->buffer->sg_segs < use_sg)
use_sg = STp->buffer->sg_segs;
}
else
bp = (STp->buffer)->b_data;
memcpy(SRpnt->cmd, cmd, sizeof(SRpnt->cmd));
STp->buffer->cmdstat.have_sense = 0;
STp->buffer->syscall_result = 0;
if (osst_execute(SRpnt, cmd, COMMAND_SIZE(cmd[0]), direction, bp, bytes,
use_sg, timeout, retries))
/* could not allocate the buffer or request was too large */
(STp->buffer)->syscall_result = (-EBUSY);
else if (do_wait) {
wait_for_completion(waiting);
SRpnt->waiting = NULL;
STp->buffer->syscall_result = osst_chk_result(STp, SRpnt);
#ifdef OSST_INJECT_ERRORS
if (STp->buffer->syscall_result == 0 &&
cmd[0] == READ_6 &&
cmd[4] &&
( (++ inject % 83) == 29 ||
(STp->first_frame_position == 240
/* or STp->read_error_frame to fail again on the block calculated above */ &&
++repeat < 3))) {
printk(OSST_DEB_MSG "%s:D: Injecting read error\n", tape_name(STp));
STp->buffer->last_result_fatal = 1;
}
#endif
}
return SRpnt;
}
/* Handle the write-behind checking (downs the semaphore) */
static void osst_write_behind_check(struct osst_tape *STp)
{
struct osst_buffer * STbuffer;
STbuffer = STp->buffer;
#if DEBUG
if (STp->write_pending)
STp->nbr_waits++;
else
STp->nbr_finished++;
#endif
wait_for_completion(&(STp->wait));
STp->buffer->last_SRpnt->waiting = NULL;
STp->buffer->syscall_result = osst_chk_result(STp, STp->buffer->last_SRpnt);
if (STp->buffer->syscall_result)
STp->buffer->syscall_result =
osst_write_error_recovery(STp, &(STp->buffer->last_SRpnt), 1);
else
STp->first_frame_position++;
osst_release_request(STp->buffer->last_SRpnt);
if (STbuffer->writing < STbuffer->buffer_bytes)
printk(KERN_WARNING "osst :A: write_behind_check: something left in buffer!\n");
STbuffer->last_SRpnt = NULL;
STbuffer->buffer_bytes -= STbuffer->writing;
STbuffer->writing = 0;
return;
}
/* Onstream specific Routines */
/*
* Initialize the OnStream AUX
*/
static void osst_init_aux(struct osst_tape * STp, int frame_type, int frame_seq_number,
int logical_blk_num, int blk_sz, int blk_cnt)
{
os_aux_t *aux = STp->buffer->aux;
os_partition_t *par = &aux->partition;
os_dat_t *dat = &aux->dat;
if (STp->raw) return;
memset(aux, 0, sizeof(*aux));
aux->format_id = htonl(0);
memcpy(aux->application_sig, "LIN4", 4);
aux->hdwr = htonl(0);
aux->frame_type = frame_type;
switch (frame_type) {
case OS_FRAME_TYPE_HEADER:
aux->update_frame_cntr = htonl(STp->update_frame_cntr);
par->partition_num = OS_CONFIG_PARTITION;
par->par_desc_ver = OS_PARTITION_VERSION;
par->wrt_pass_cntr = htons(0xffff);
/* 0-4 = reserved, 5-9 = header, 2990-2994 = header, 2995-2999 = reserved */
par->first_frame_ppos = htonl(0);
par->last_frame_ppos = htonl(0xbb7);
aux->frame_seq_num = htonl(0);
aux->logical_blk_num_high = htonl(0);
aux->logical_blk_num = htonl(0);
aux->next_mark_ppos = htonl(STp->first_mark_ppos);
break;
case OS_FRAME_TYPE_DATA:
case OS_FRAME_TYPE_MARKER:
dat->dat_sz = 8;
dat->reserved1 = 0;
dat->entry_cnt = 1;
dat->reserved3 = 0;
dat->dat_list[0].blk_sz = htonl(blk_sz);
dat->dat_list[0].blk_cnt = htons(blk_cnt);
dat->dat_list[0].flags = frame_type==OS_FRAME_TYPE_MARKER?
OS_DAT_FLAGS_MARK:OS_DAT_FLAGS_DATA;
dat->dat_list[0].reserved = 0;
case OS_FRAME_TYPE_EOD:
aux->update_frame_cntr = htonl(0);
par->partition_num = OS_DATA_PARTITION;
par->par_desc_ver = OS_PARTITION_VERSION;
par->wrt_pass_cntr = htons(STp->wrt_pass_cntr);
par->first_frame_ppos = htonl(STp->first_data_ppos);
par->last_frame_ppos = htonl(STp->capacity);
aux->frame_seq_num = htonl(frame_seq_number);
aux->logical_blk_num_high = htonl(0);
aux->logical_blk_num = htonl(logical_blk_num);
break;
default: ; /* probably FILL */
}
aux->filemark_cnt = htonl(STp->filemark_cnt);
aux->phys_fm = htonl(0xffffffff);
aux->last_mark_ppos = htonl(STp->last_mark_ppos);
aux->last_mark_lbn = htonl(STp->last_mark_lbn);
}
/*
* Verify that we have the correct tape frame
*/
static int osst_verify_frame(struct osst_tape * STp, int frame_seq_number, int quiet)
{
char * name = tape_name(STp);
os_aux_t * aux = STp->buffer->aux;
os_partition_t * par = &(aux->partition);
struct st_partstat * STps = &(STp->ps[STp->partition]);
int blk_cnt, blk_sz, i;
if (STp->raw) {
if (STp->buffer->syscall_result) {
for (i=0; i < STp->buffer->sg_segs; i++)
memset(page_address(sg_page(&STp->buffer->sg[i])),
0, STp->buffer->sg[i].length);
strcpy(STp->buffer->b_data, "READ ERROR ON FRAME");
} else
STp->buffer->buffer_bytes = OS_FRAME_SIZE;
return 1;
}
if (STp->buffer->syscall_result) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Skipping frame, read error\n", name);
#endif
return 0;
}
if (ntohl(aux->format_id) != 0) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Skipping frame, format_id %u\n", name, ntohl(aux->format_id));
#endif
goto err_out;
}
if (memcmp(aux->application_sig, STp->application_sig, 4) != 0 &&
(memcmp(aux->application_sig, "LIN3", 4) != 0 || STp->linux_media_version != 4)) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Skipping frame, incorrect application signature\n", name);
#endif
goto err_out;
}
if (par->partition_num != OS_DATA_PARTITION) {
if (!STp->linux_media || STp->linux_media_version != 2) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Skipping frame, partition num %d\n",
name, par->partition_num);
#endif
goto err_out;
}
}
if (par->par_desc_ver != OS_PARTITION_VERSION) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Skipping frame, partition version %d\n", name, par->par_desc_ver);
#endif
goto err_out;
}
if (ntohs(par->wrt_pass_cntr) != STp->wrt_pass_cntr) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Skipping frame, wrt_pass_cntr %d (expected %d)\n",
name, ntohs(par->wrt_pass_cntr), STp->wrt_pass_cntr);
#endif
goto err_out;
}
if (aux->frame_type != OS_FRAME_TYPE_DATA &&
aux->frame_type != OS_FRAME_TYPE_EOD &&
aux->frame_type != OS_FRAME_TYPE_MARKER) {
if (!quiet) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Skipping frame, frame type %x\n", name, aux->frame_type);
#endif
}
goto err_out;
}
if (aux->frame_type == OS_FRAME_TYPE_EOD &&
STp->first_frame_position < STp->eod_frame_ppos) {
printk(KERN_INFO "%s:I: Skipping premature EOD frame %d\n", name,
STp->first_frame_position);
goto err_out;
}
if (frame_seq_number != -1 && ntohl(aux->frame_seq_num) != frame_seq_number) {
if (!quiet) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Skipping frame, sequence number %u (expected %d)\n",
name, ntohl(aux->frame_seq_num), frame_seq_number);
#endif
}
goto err_out;
}
if (aux->frame_type == OS_FRAME_TYPE_MARKER) {
STps->eof = ST_FM_HIT;
i = ntohl(aux->filemark_cnt);
if (STp->header_cache != NULL && i < OS_FM_TAB_MAX && (i > STp->filemark_cnt ||
STp->first_frame_position - 1 != ntohl(STp->header_cache->dat_fm_tab.fm_tab_ent[i]))) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: %s filemark %d at frame pos %d\n", name,
STp->header_cache->dat_fm_tab.fm_tab_ent[i] == 0?"Learned":"Corrected",
i, STp->first_frame_position - 1);
#endif
STp->header_cache->dat_fm_tab.fm_tab_ent[i] = htonl(STp->first_frame_position - 1);
if (i >= STp->filemark_cnt)
STp->filemark_cnt = i+1;
}
}
if (aux->frame_type == OS_FRAME_TYPE_EOD) {
STps->eof = ST_EOD_1;
STp->frame_in_buffer = 1;
}
if (aux->frame_type == OS_FRAME_TYPE_DATA) {
blk_cnt = ntohs(aux->dat.dat_list[0].blk_cnt);
blk_sz = ntohl(aux->dat.dat_list[0].blk_sz);
STp->buffer->buffer_bytes = blk_cnt * blk_sz;
STp->buffer->read_pointer = 0;
STp->frame_in_buffer = 1;
/* See what block size was used to write file */
if (STp->block_size != blk_sz && blk_sz > 0) {
printk(KERN_INFO
"%s:I: File was written with block size %d%c, currently %d%c, adjusted to match.\n",
name, blk_sz<1024?blk_sz:blk_sz/1024,blk_sz<1024?'b':'k',
STp->block_size<1024?STp->block_size:STp->block_size/1024,
STp->block_size<1024?'b':'k');
STp->block_size = blk_sz;
STp->buffer->buffer_blocks = OS_DATA_SIZE / blk_sz;
}
STps->eof = ST_NOEOF;
}
STp->frame_seq_number = ntohl(aux->frame_seq_num);
STp->logical_blk_num = ntohl(aux->logical_blk_num);
return 1;
err_out:
if (STp->read_error_frame == 0)
STp->read_error_frame = STp->first_frame_position - 1;
return 0;
}
/*
* Wait for the unit to become Ready
*/
static int osst_wait_ready(struct osst_tape * STp, struct osst_request ** aSRpnt,
unsigned timeout, int initial_delay)
{
unsigned char cmd[MAX_COMMAND_SIZE];
struct osst_request * SRpnt;
unsigned long startwait = jiffies;
#if DEBUG
int dbg = debugging;
char * name = tape_name(STp);
printk(OSST_DEB_MSG "%s:D: Reached onstream wait ready\n", name);
#endif
if (initial_delay > 0)
msleep(jiffies_to_msecs(initial_delay));
memset(cmd, 0, MAX_COMMAND_SIZE);
cmd[0] = TEST_UNIT_READY;
SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1);
*aSRpnt = SRpnt;
if (!SRpnt) return (-EBUSY);
while ( STp->buffer->syscall_result && time_before(jiffies, startwait + timeout*HZ) &&
(( SRpnt->sense[2] == 2 && SRpnt->sense[12] == 4 &&
(SRpnt->sense[13] == 1 || SRpnt->sense[13] == 8) ) ||
( SRpnt->sense[2] == 6 && SRpnt->sense[12] == 0x28 &&
SRpnt->sense[13] == 0 ) )) {
#if DEBUG
if (debugging) {
printk(OSST_DEB_MSG "%s:D: Sleeping in onstream wait ready\n", name);
printk(OSST_DEB_MSG "%s:D: Turning off debugging for a while\n", name);
debugging = 0;
}
#endif
msleep(100);
memset(cmd, 0, MAX_COMMAND_SIZE);
cmd[0] = TEST_UNIT_READY;
SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1);
}
*aSRpnt = SRpnt;
#if DEBUG
debugging = dbg;
#endif
if ( STp->buffer->syscall_result &&
osst_write_error_recovery(STp, aSRpnt, 0) ) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Abnormal exit from onstream wait ready\n", name);
printk(OSST_DEB_MSG "%s:D: Result = %d, Sense: 0=%02x, 2=%02x, 12=%02x, 13=%02x\n", name,
STp->buffer->syscall_result, SRpnt->sense[0], SRpnt->sense[2],
SRpnt->sense[12], SRpnt->sense[13]);
#endif
return (-EIO);
}
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Normal exit from onstream wait ready\n", name);
#endif
return 0;
}
/*
* Wait for a tape to be inserted in the unit
*/
static int osst_wait_for_medium(struct osst_tape * STp, struct osst_request ** aSRpnt, unsigned timeout)
{
unsigned char cmd[MAX_COMMAND_SIZE];
struct osst_request * SRpnt;
unsigned long startwait = jiffies;
#if DEBUG
int dbg = debugging;
char * name = tape_name(STp);
printk(OSST_DEB_MSG "%s:D: Reached onstream wait for medium\n", name);
#endif
memset(cmd, 0, MAX_COMMAND_SIZE);
cmd[0] = TEST_UNIT_READY;
SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1);
*aSRpnt = SRpnt;
if (!SRpnt) return (-EBUSY);
while ( STp->buffer->syscall_result && time_before(jiffies, startwait + timeout*HZ) &&
SRpnt->sense[2] == 2 && SRpnt->sense[12] == 0x3a && SRpnt->sense[13] == 0 ) {
#if DEBUG
if (debugging) {
printk(OSST_DEB_MSG "%s:D: Sleeping in onstream wait medium\n", name);
printk(OSST_DEB_MSG "%s:D: Turning off debugging for a while\n", name);
debugging = 0;
}
#endif
msleep(100);
memset(cmd, 0, MAX_COMMAND_SIZE);
cmd[0] = TEST_UNIT_READY;
SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1);
}
*aSRpnt = SRpnt;
#if DEBUG
debugging = dbg;
#endif
if ( STp->buffer->syscall_result && SRpnt->sense[2] != 2 &&
SRpnt->sense[12] != 4 && SRpnt->sense[13] == 1) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Abnormal exit from onstream wait medium\n", name);
printk(OSST_DEB_MSG "%s:D: Result = %d, Sense: 0=%02x, 2=%02x, 12=%02x, 13=%02x\n", name,
STp->buffer->syscall_result, SRpnt->sense[0], SRpnt->sense[2],
SRpnt->sense[12], SRpnt->sense[13]);
#endif
return 0;
}
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Normal exit from onstream wait medium\n", name);
#endif
return 1;
}
static int osst_position_tape_and_confirm(struct osst_tape * STp, struct osst_request ** aSRpnt, int frame)
{
int retval;
osst_wait_ready(STp, aSRpnt, 15 * 60, 0); /* TODO - can this catch a write error? */
retval = osst_set_frame_position(STp, aSRpnt, frame, 0);
if (retval) return (retval);
osst_wait_ready(STp, aSRpnt, 15 * 60, OSST_WAIT_POSITION_COMPLETE);
return (osst_get_frame_position(STp, aSRpnt));
}
/*
* Wait for write(s) to complete
*/
static int osst_flush_drive_buffer(struct osst_tape * STp, struct osst_request ** aSRpnt)
{
unsigned char cmd[MAX_COMMAND_SIZE];
struct osst_request * SRpnt;
int result = 0;
int delay = OSST_WAIT_WRITE_COMPLETE;
#if DEBUG
char * name = tape_name(STp);
printk(OSST_DEB_MSG "%s:D: Reached onstream flush drive buffer (write filemark)\n", name);
#endif
memset(cmd, 0, MAX_COMMAND_SIZE);
cmd[0] = WRITE_FILEMARKS;
cmd[1] = 1;
SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1);
*aSRpnt = SRpnt;
if (!SRpnt) return (-EBUSY);
if (STp->buffer->syscall_result) {
if ((SRpnt->sense[2] & 0x0f) == 2 && SRpnt->sense[12] == 4) {
if (SRpnt->sense[13] == 8) {
delay = OSST_WAIT_LONG_WRITE_COMPLETE;
}
} else
result = osst_write_error_recovery(STp, aSRpnt, 0);
}
result |= osst_wait_ready(STp, aSRpnt, 5 * 60, delay);
STp->ps[STp->partition].rw = OS_WRITING_COMPLETE;
return (result);
}
#define OSST_POLL_PER_SEC 10
static int osst_wait_frame(struct osst_tape * STp, struct osst_request ** aSRpnt, int curr, int minlast, int to)
{
unsigned long startwait = jiffies;
char * name = tape_name(STp);
#if DEBUG
char notyetprinted = 1;
#endif
if (minlast >= 0 && STp->ps[STp->partition].rw != ST_READING)
printk(KERN_ERR "%s:A: Waiting for frame without having initialized read!\n", name);
while (time_before (jiffies, startwait + to*HZ))
{
int result;
result = osst_get_frame_position(STp, aSRpnt);
if (result == -EIO)
if ((result = osst_write_error_recovery(STp, aSRpnt, 0)) == 0)
return 0; /* successful recovery leaves drive ready for frame */
if (result < 0) break;
if (STp->first_frame_position == curr &&
((minlast < 0 &&
(signed)STp->last_frame_position > (signed)curr + minlast) ||
(minlast >= 0 && STp->cur_frames > minlast)
) && result >= 0)
{
#if DEBUG
if (debugging || time_after_eq(jiffies, startwait + 2*HZ/OSST_POLL_PER_SEC))
printk (OSST_DEB_MSG
"%s:D: Succ wait f fr %i (>%i): %i-%i %i (%i): %3li.%li s\n",
name, curr, curr+minlast, STp->first_frame_position,
STp->last_frame_position, STp->cur_frames,
result, (jiffies-startwait)/HZ,
(((jiffies-startwait)%HZ)*10)/HZ);
#endif
return 0;
}
#if DEBUG
if (time_after_eq(jiffies, startwait + 2*HZ/OSST_POLL_PER_SEC) && notyetprinted)
{
printk (OSST_DEB_MSG "%s:D: Wait for frame %i (>%i): %i-%i %i (%i)\n",
name, curr, curr+minlast, STp->first_frame_position,
STp->last_frame_position, STp->cur_frames, result);
notyetprinted--;
}
#endif
msleep(1000 / OSST_POLL_PER_SEC);
}
#if DEBUG
printk (OSST_DEB_MSG "%s:D: Fail wait f fr %i (>%i): %i-%i %i: %3li.%li s\n",
name, curr, curr+minlast, STp->first_frame_position,
STp->last_frame_position, STp->cur_frames,
(jiffies-startwait)/HZ, (((jiffies-startwait)%HZ)*10)/HZ);
#endif
return -EBUSY;
}
static int osst_recover_wait_frame(struct osst_tape * STp, struct osst_request ** aSRpnt, int writing)
{
struct osst_request * SRpnt;
unsigned char cmd[MAX_COMMAND_SIZE];
unsigned long startwait = jiffies;
int retval = 1;
char * name = tape_name(STp);
if (writing) {
char mybuf[24];
char * olddata = STp->buffer->b_data;
int oldsize = STp->buffer->buffer_size;
/* write zero fm then read pos - if shows write error, try to recover - if no progress, wait */
memset(cmd, 0, MAX_COMMAND_SIZE);
cmd[0] = WRITE_FILEMARKS;
cmd[1] = 1;
SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, 0, DMA_NONE, STp->timeout,
MAX_RETRIES, 1);
while (retval && time_before (jiffies, startwait + 5*60*HZ)) {
if (STp->buffer->syscall_result && (SRpnt->sense[2] & 0x0f) != 2) {
/* some failure - not just not-ready */
retval = osst_write_error_recovery(STp, aSRpnt, 0);
break;
}
schedule_timeout_interruptible(HZ / OSST_POLL_PER_SEC);
STp->buffer->b_data = mybuf; STp->buffer->buffer_size = 24;
memset(cmd, 0, MAX_COMMAND_SIZE);
cmd[0] = READ_POSITION;
SRpnt = osst_do_scsi(SRpnt, STp, cmd, 20, DMA_FROM_DEVICE, STp->timeout,
MAX_RETRIES, 1);
retval = ( STp->buffer->syscall_result || (STp->buffer)->b_data[15] > 25 );
STp->buffer->b_data = olddata; STp->buffer->buffer_size = oldsize;
}
if (retval)
printk(KERN_ERR "%s:E: Device did not succeed to write buffered data\n", name);
} else
/* TODO - figure out which error conditions can be handled */
if (STp->buffer->syscall_result)
printk(KERN_WARNING
"%s:W: Recover_wait_frame(read) cannot handle %02x:%02x:%02x\n", name,
(*aSRpnt)->sense[ 2] & 0x0f,
(*aSRpnt)->sense[12],
(*aSRpnt)->sense[13]);
return retval;
}
/*
* Read the next OnStream tape frame at the current location
*/
static int osst_read_frame(struct osst_tape * STp, struct osst_request ** aSRpnt, int timeout)
{
unsigned char cmd[MAX_COMMAND_SIZE];
struct osst_request * SRpnt;
int retval = 0;
#if DEBUG
os_aux_t * aux = STp->buffer->aux;
char * name = tape_name(STp);
#endif
if (STp->poll)
if (osst_wait_frame (STp, aSRpnt, STp->first_frame_position, 0, timeout))
retval = osst_recover_wait_frame(STp, aSRpnt, 0);
memset(cmd, 0, MAX_COMMAND_SIZE);
cmd[0] = READ_6;
cmd[1] = 1;
cmd[4] = 1;
#if DEBUG
if (debugging)
printk(OSST_DEB_MSG "%s:D: Reading frame from OnStream tape\n", name);
#endif
SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, OS_FRAME_SIZE, DMA_FROM_DEVICE,
STp->timeout, MAX_RETRIES, 1);
*aSRpnt = SRpnt;
if (!SRpnt)
return (-EBUSY);
if ((STp->buffer)->syscall_result) {
retval = 1;
if (STp->read_error_frame == 0) {
STp->read_error_frame = STp->first_frame_position;
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Recording read error at %d\n", name, STp->read_error_frame);
#endif
}
#if DEBUG
if (debugging)
printk(OSST_DEB_MSG "%s:D: Sense: %2x %2x %2x %2x %2x %2x %2x %2x\n",
name,
SRpnt->sense[0], SRpnt->sense[1],
SRpnt->sense[2], SRpnt->sense[3],
SRpnt->sense[4], SRpnt->sense[5],
SRpnt->sense[6], SRpnt->sense[7]);
#endif
}
else
STp->first_frame_position++;
#if DEBUG
if (debugging) {
char sig[8]; int i;
for (i=0;i<4;i++)
sig[i] = aux->application_sig[i]<32?'^':aux->application_sig[i];
sig[4] = '\0';
printk(OSST_DEB_MSG
"%s:D: AUX: %s UpdFrCt#%d Wpass#%d %s FrSeq#%d LogBlk#%d Qty=%d Sz=%d\n", name, sig,
ntohl(aux->update_frame_cntr), ntohs(aux->partition.wrt_pass_cntr),
aux->frame_type==1?"EOD":aux->frame_type==2?"MARK":
aux->frame_type==8?"HEADR":aux->frame_type==0x80?"DATA":"FILL",
ntohl(aux->frame_seq_num), ntohl(aux->logical_blk_num),
ntohs(aux->dat.dat_list[0].blk_cnt), ntohl(aux->dat.dat_list[0].blk_sz) );
if (aux->frame_type==2)
printk(OSST_DEB_MSG "%s:D: mark_cnt=%d, last_mark_ppos=%d, last_mark_lbn=%d\n", name,
ntohl(aux->filemark_cnt), ntohl(aux->last_mark_ppos), ntohl(aux->last_mark_lbn));
printk(OSST_DEB_MSG "%s:D: Exit read frame from OnStream tape with code %d\n", name, retval);
}
#endif
return (retval);
}
static int osst_initiate_read(struct osst_tape * STp, struct osst_request ** aSRpnt)
{
struct st_partstat * STps = &(STp->ps[STp->partition]);
struct osst_request * SRpnt ;
unsigned char cmd[MAX_COMMAND_SIZE];
int retval = 0;
char * name = tape_name(STp);
if (STps->rw != ST_READING) { /* Initialize read operation */
if (STps->rw == ST_WRITING || STp->dirty) {
STp->write_type = OS_WRITE_DATA;
osst_flush_write_buffer(STp, aSRpnt);
osst_flush_drive_buffer(STp, aSRpnt);
}
STps->rw = ST_READING;
STp->frame_in_buffer = 0;
/*
* Issue a read 0 command to get the OnStream drive
* read frames into its buffer.
*/
memset(cmd, 0, MAX_COMMAND_SIZE);
cmd[0] = READ_6;
cmd[1] = 1;
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Start Read Ahead on OnStream tape\n", name);
#endif
SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1);
*aSRpnt = SRpnt;
if ((retval = STp->buffer->syscall_result))
printk(KERN_WARNING "%s:W: Error starting read ahead\n", name);
}
return retval;
}
static int osst_get_logical_frame(struct osst_tape * STp, struct osst_request ** aSRpnt,
int frame_seq_number, int quiet)
{
struct st_partstat * STps = &(STp->ps[STp->partition]);
char * name = tape_name(STp);
int cnt = 0,
bad = 0,
past = 0,
x,
position;
/*
* If we want just any frame (-1) and there is a frame in the buffer, return it
*/
if (frame_seq_number == -1 && STp->frame_in_buffer) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Frame %d still in buffer\n", name, STp->frame_seq_number);
#endif
return (STps->eof);
}
/*
* Search and wait for the next logical tape frame
*/
while (1) {
if (cnt++ > 400) {
printk(KERN_ERR "%s:E: Couldn't find logical frame %d, aborting\n",
name, frame_seq_number);
if (STp->read_error_frame) {
osst_set_frame_position(STp, aSRpnt, STp->read_error_frame, 0);
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Repositioning tape to bad frame %d\n",
name, STp->read_error_frame);
#endif
STp->read_error_frame = 0;
STp->abort_count++;
}
return (-EIO);
}
#if DEBUG
if (debugging)
printk(OSST_DEB_MSG "%s:D: Looking for frame %d, attempt %d\n",
name, frame_seq_number, cnt);
#endif
if ( osst_initiate_read(STp, aSRpnt)
|| ( (!STp->frame_in_buffer) && osst_read_frame(STp, aSRpnt, 30) ) ) {
if (STp->raw)
return (-EIO);
position = osst_get_frame_position(STp, aSRpnt);
if (position >= 0xbae && position < 0xbb8)
position = 0xbb8;
else if (position > STp->eod_frame_ppos || ++bad == 10) {
position = STp->read_error_frame - 1;
bad = 0;
}
else {
position += 29;
cnt += 19;
}
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Bad frame detected, positioning tape to block %d\n",
name, position);
#endif
osst_set_frame_position(STp, aSRpnt, position, 0);
continue;
}
if (osst_verify_frame(STp, frame_seq_number, quiet))
break;
if (osst_verify_frame(STp, -1, quiet)) {
x = ntohl(STp->buffer->aux->frame_seq_num);
if (STp->fast_open) {
printk(KERN_WARNING
"%s:W: Found logical frame %d instead of %d after fast open\n",
name, x, frame_seq_number);
STp->header_ok = 0;
STp->read_error_frame = 0;
return (-EIO);
}
if (x > frame_seq_number) {
if (++past > 3) {
/* positioning backwards did not bring us to the desired frame */
position = STp->read_error_frame - 1;
}
else {
position = osst_get_frame_position(STp, aSRpnt)
+ frame_seq_number - x - 1;
if (STp->first_frame_position >= 3000 && position < 3000)
position -= 10;
}
#if DEBUG
printk(OSST_DEB_MSG
"%s:D: Found logical frame %d while looking for %d: back up %d\n",
name, x, frame_seq_number,
STp->first_frame_position - position);
#endif
osst_set_frame_position(STp, aSRpnt, position, 0);
cnt += 10;
}
else
past = 0;
}
if (osst_get_frame_position(STp, aSRpnt) == 0xbaf) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Skipping config partition\n", name);
#endif
osst_set_frame_position(STp, aSRpnt, 0xbb8, 0);
cnt--;
}
STp->frame_in_buffer = 0;
}
if (cnt > 1) {
STp->recover_count++;
STp->recover_erreg++;
printk(KERN_WARNING "%s:I: Don't worry, Read error at position %d recovered\n",
name, STp->read_error_frame);
}
STp->read_count++;
#if DEBUG
if (debugging || STps->eof)
printk(OSST_DEB_MSG
"%s:D: Exit get logical frame (%d=>%d) from OnStream tape with code %d\n",
name, frame_seq_number, STp->frame_seq_number, STps->eof);
#endif
STp->fast_open = 0;
STp->read_error_frame = 0;
return (STps->eof);
}
static int osst_seek_logical_blk(struct osst_tape * STp, struct osst_request ** aSRpnt, int logical_blk_num)
{
struct st_partstat * STps = &(STp->ps[STp->partition]);
char * name = tape_name(STp);
int retries = 0;
int frame_seq_estimate, ppos_estimate, move;
if (logical_blk_num < 0) logical_blk_num = 0;
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Seeking logical block %d (now at %d, size %d%c)\n",
name, logical_blk_num, STp->logical_blk_num,
STp->block_size<1024?STp->block_size:STp->block_size/1024,
STp->block_size<1024?'b':'k');
#endif
/* Do we know where we are? */
if (STps->drv_block >= 0) {
move = logical_blk_num - STp->logical_blk_num;
if (move < 0) move -= (OS_DATA_SIZE / STp->block_size) - 1;
move /= (OS_DATA_SIZE / STp->block_size);
frame_seq_estimate = STp->frame_seq_number + move;
} else
frame_seq_estimate = logical_blk_num * STp->block_size / OS_DATA_SIZE;
if (frame_seq_estimate < 2980) ppos_estimate = frame_seq_estimate + 10;
else ppos_estimate = frame_seq_estimate + 20;
while (++retries < 10) {
if (ppos_estimate > STp->eod_frame_ppos-2) {
frame_seq_estimate += STp->eod_frame_ppos - 2 - ppos_estimate;
ppos_estimate = STp->eod_frame_ppos - 2;
}
if (frame_seq_estimate < 0) {
frame_seq_estimate = 0;
ppos_estimate = 10;
}
osst_set_frame_position(STp, aSRpnt, ppos_estimate, 0);
if (osst_get_logical_frame(STp, aSRpnt, frame_seq_estimate, 1) >= 0) {
/* we've located the estimated frame, now does it have our block? */
if (logical_blk_num < STp->logical_blk_num ||
logical_blk_num >= STp->logical_blk_num + ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt)) {
if (STps->eof == ST_FM_HIT)
move = logical_blk_num < STp->logical_blk_num? -2 : 1;
else {
move = logical_blk_num - STp->logical_blk_num;
if (move < 0) move -= (OS_DATA_SIZE / STp->block_size) - 1;
move /= (OS_DATA_SIZE / STp->block_size);
}
if (!move) move = logical_blk_num > STp->logical_blk_num ? 1 : -1;
#if DEBUG
printk(OSST_DEB_MSG
"%s:D: Seek retry %d at ppos %d fsq %d (est %d) lbn %d (need %d) move %d\n",
name, retries, ppos_estimate, STp->frame_seq_number, frame_seq_estimate,
STp->logical_blk_num, logical_blk_num, move);
#endif
frame_seq_estimate += move;
ppos_estimate += move;
continue;
} else {
STp->buffer->read_pointer = (logical_blk_num - STp->logical_blk_num) * STp->block_size;
STp->buffer->buffer_bytes -= STp->buffer->read_pointer;
STp->logical_blk_num = logical_blk_num;
#if DEBUG
printk(OSST_DEB_MSG
"%s:D: Seek success at ppos %d fsq %d in_buf %d, bytes %d, ptr %d*%d\n",
name, ppos_estimate, STp->frame_seq_number, STp->frame_in_buffer,
STp->buffer->buffer_bytes, STp->buffer->read_pointer / STp->block_size,
STp->block_size);
#endif
STps->drv_file = ntohl(STp->buffer->aux->filemark_cnt);
if (STps->eof == ST_FM_HIT) {
STps->drv_file++;
STps->drv_block = 0;
} else {
STps->drv_block = ntohl(STp->buffer->aux->last_mark_lbn)?
STp->logical_blk_num -
(STps->drv_file ? ntohl(STp->buffer->aux->last_mark_lbn) + 1 : 0):
-1;
}
STps->eof = (STp->first_frame_position >= STp->eod_frame_ppos)?ST_EOD:ST_NOEOF;
return 0;
}
}
if (osst_get_logical_frame(STp, aSRpnt, -1, 1) < 0)
goto error;
/* we are not yet at the estimated frame, adjust our estimate of its physical position */
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Seek retry %d at ppos %d fsq %d (est %d) lbn %d (need %d)\n",
name, retries, ppos_estimate, STp->frame_seq_number, frame_seq_estimate,
STp->logical_blk_num, logical_blk_num);
#endif
if (frame_seq_estimate != STp->frame_seq_number)
ppos_estimate += frame_seq_estimate - STp->frame_seq_number;
else
break;
}
error:
printk(KERN_ERR "%s:E: Couldn't seek to logical block %d (at %d), %d retries\n",
name, logical_blk_num, STp->logical_blk_num, retries);
return (-EIO);
}
/* The values below are based on the OnStream frame payload size of 32K == 2**15,
* that is, OSST_FRAME_SHIFT + OSST_SECTOR_SHIFT must be 15. With a minimum block
* size of 512 bytes, we need to be able to resolve 32K/512 == 64 == 2**6 positions
* inside each frame. Finaly, OSST_SECTOR_MASK == 2**OSST_FRAME_SHIFT - 1.
*/
#define OSST_FRAME_SHIFT 6
#define OSST_SECTOR_SHIFT 9
#define OSST_SECTOR_MASK 0x03F
static int osst_get_sector(struct osst_tape * STp, struct osst_request ** aSRpnt)
{
int sector;
#if DEBUG
char * name = tape_name(STp);
printk(OSST_DEB_MSG
"%s:D: Positioned at ppos %d, frame %d, lbn %d, file %d, blk %d, %cptr %d, eof %d\n",
name, STp->first_frame_position, STp->frame_seq_number, STp->logical_blk_num,
STp->ps[STp->partition].drv_file, STp->ps[STp->partition].drv_block,
STp->ps[STp->partition].rw == ST_WRITING?'w':'r',
STp->ps[STp->partition].rw == ST_WRITING?STp->buffer->buffer_bytes:
STp->buffer->read_pointer, STp->ps[STp->partition].eof);
#endif
/* do we know where we are inside a file? */
if (STp->ps[STp->partition].drv_block >= 0) {
sector = (STp->frame_in_buffer ? STp->first_frame_position-1 :
STp->first_frame_position) << OSST_FRAME_SHIFT;
if (STp->ps[STp->partition].rw == ST_WRITING)
sector |= (STp->buffer->buffer_bytes >> OSST_SECTOR_SHIFT) & OSST_SECTOR_MASK;
else
sector |= (STp->buffer->read_pointer >> OSST_SECTOR_SHIFT) & OSST_SECTOR_MASK;
} else {
sector = osst_get_frame_position(STp, aSRpnt);
if (sector > 0)
sector <<= OSST_FRAME_SHIFT;
}
return sector;
}
static int osst_seek_sector(struct osst_tape * STp, struct osst_request ** aSRpnt, int sector)
{
struct st_partstat * STps = &(STp->ps[STp->partition]);
int frame = sector >> OSST_FRAME_SHIFT,
offset = (sector & OSST_SECTOR_MASK) << OSST_SECTOR_SHIFT,
r;
#if DEBUG
char * name = tape_name(STp);
printk(OSST_DEB_MSG "%s:D: Seeking sector %d in frame %d at offset %d\n",
name, sector, frame, offset);
#endif
if (frame < 0 || frame >= STp->capacity) return (-ENXIO);
if (frame <= STp->first_data_ppos) {
STp->frame_seq_number = STp->logical_blk_num = STps->drv_file = STps->drv_block = 0;
return (osst_set_frame_position(STp, aSRpnt, frame, 0));
}
r = osst_set_frame_position(STp, aSRpnt, offset?frame:frame-1, 0);
if (r < 0) return r;
r = osst_get_logical_frame(STp, aSRpnt, -1, 1);
if (r < 0) return r;
if (osst_get_frame_position(STp, aSRpnt) != (offset?frame+1:frame)) return (-EIO);
if (offset) {
STp->logical_blk_num += offset / STp->block_size;
STp->buffer->read_pointer = offset;
STp->buffer->buffer_bytes -= offset;
} else {
STp->frame_seq_number++;
STp->frame_in_buffer = 0;
STp->logical_blk_num += ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt);
STp->buffer->buffer_bytes = STp->buffer->read_pointer = 0;
}
STps->drv_file = ntohl(STp->buffer->aux->filemark_cnt);
if (STps->eof == ST_FM_HIT) {
STps->drv_file++;
STps->drv_block = 0;
} else {
STps->drv_block = ntohl(STp->buffer->aux->last_mark_lbn)?
STp->logical_blk_num -
(STps->drv_file ? ntohl(STp->buffer->aux->last_mark_lbn) + 1 : 0):
-1;
}
STps->eof = (STp->first_frame_position >= STp->eod_frame_ppos)?ST_EOD:ST_NOEOF;
#if DEBUG
printk(OSST_DEB_MSG
"%s:D: Now positioned at ppos %d, frame %d, lbn %d, file %d, blk %d, rptr %d, eof %d\n",
name, STp->first_frame_position, STp->frame_seq_number, STp->logical_blk_num,
STps->drv_file, STps->drv_block, STp->buffer->read_pointer, STps->eof);
#endif
return 0;
}
/*
* Read back the drive's internal buffer contents, as a part
* of the write error recovery mechanism for old OnStream
* firmware revisions.
* Precondition for this function to work: all frames in the
* drive's buffer must be of one type (DATA, MARK or EOD)!
*/
static int osst_read_back_buffer_and_rewrite(struct osst_tape * STp, struct osst_request ** aSRpnt,
unsigned int frame, unsigned int skip, int pending)
{
struct osst_request * SRpnt = * aSRpnt;
unsigned char * buffer, * p;
unsigned char cmd[MAX_COMMAND_SIZE];
int flag, new_frame, i;
int nframes = STp->cur_frames;
int blks_per_frame = ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt);
int frame_seq_number = ntohl(STp->buffer->aux->frame_seq_num)
- (nframes + pending - 1);
int logical_blk_num = ntohl(STp->buffer->aux->logical_blk_num)
- (nframes + pending - 1) * blks_per_frame;
char * name = tape_name(STp);
unsigned long startwait = jiffies;
#if DEBUG
int dbg = debugging;
#endif
if ((buffer = (unsigned char *)vmalloc((nframes + 1) * OS_DATA_SIZE)) == NULL)
return (-EIO);
printk(KERN_INFO "%s:I: Reading back %d frames from drive buffer%s\n",
name, nframes, pending?" and one that was pending":"");
osst_copy_from_buffer(STp->buffer, (p = &buffer[nframes * OS_DATA_SIZE]));
#if DEBUG
if (pending && debugging)
printk(OSST_DEB_MSG "%s:D: Pending frame %d (lblk %d), data %02x %02x %02x %02x\n",
name, frame_seq_number + nframes,
logical_blk_num + nframes * blks_per_frame,
p[0], p[1], p[2], p[3]);
#endif
for (i = 0, p = buffer; i < nframes; i++, p += OS_DATA_SIZE) {
memset(cmd, 0, MAX_COMMAND_SIZE);
cmd[0] = 0x3C; /* Buffer Read */
cmd[1] = 6; /* Retrieve Faulty Block */
cmd[7] = 32768 >> 8;
cmd[8] = 32768 & 0xff;
SRpnt = osst_do_scsi(SRpnt, STp, cmd, OS_FRAME_SIZE, DMA_FROM_DEVICE,
STp->timeout, MAX_RETRIES, 1);
if ((STp->buffer)->syscall_result || !SRpnt) {
printk(KERN_ERR "%s:E: Failed to read frame back from OnStream buffer\n", name);
vfree(buffer);
*aSRpnt = SRpnt;
return (-EIO);
}
osst_copy_from_buffer(STp->buffer, p);
#if DEBUG
if (debugging)
printk(OSST_DEB_MSG "%s:D: Read back logical frame %d, data %02x %02x %02x %02x\n",
name, frame_seq_number + i, p[0], p[1], p[2], p[3]);
#endif
}
*aSRpnt = SRpnt;
osst_get_frame_position(STp, aSRpnt);
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Frames left in buffer: %d\n", name, STp->cur_frames);
#endif
/* Write synchronously so we can be sure we're OK again and don't have to recover recursively */
/* In the header we don't actually re-write the frames that fail, just the ones after them */
for (flag=1, new_frame=frame, p=buffer, i=0; i < nframes + pending; ) {
if (flag) {
if (STp->write_type == OS_WRITE_HEADER) {
i += skip;
p += skip * OS_DATA_SIZE;
}
else if (new_frame < 2990 && new_frame+skip+nframes+pending >= 2990)
new_frame = 3000-i;
else
new_frame += skip;
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Position to frame %d, write fseq %d\n",
name, new_frame+i, frame_seq_number+i);
#endif
osst_set_frame_position(STp, aSRpnt, new_frame + i, 0);
osst_wait_ready(STp, aSRpnt, 60, OSST_WAIT_POSITION_COMPLETE);
osst_get_frame_position(STp, aSRpnt);
SRpnt = * aSRpnt;
if (new_frame > frame + 1000) {
printk(KERN_ERR "%s:E: Failed to find writable tape media\n", name);
vfree(buffer);
return (-EIO);
}
if ( i >= nframes + pending ) break;
flag = 0;
}
osst_copy_to_buffer(STp->buffer, p);
/*
* IMPORTANT: for error recovery to work, _never_ queue frames with mixed frame type!
*/
osst_init_aux(STp, STp->buffer->aux->frame_type, frame_seq_number+i,
logical_blk_num + i*blks_per_frame,
ntohl(STp->buffer->aux->dat.dat_list[0].blk_sz), blks_per_frame);
memset(cmd, 0, MAX_COMMAND_SIZE);
cmd[0] = WRITE_6;
cmd[1] = 1;
cmd[4] = 1;
#if DEBUG
if (debugging)
printk(OSST_DEB_MSG
"%s:D: About to write frame %d, seq %d, lbn %d, data %02x %02x %02x %02x\n",
name, new_frame+i, frame_seq_number+i, logical_blk_num + i*blks_per_frame,
p[0], p[1], p[2], p[3]);
#endif
SRpnt = osst_do_scsi(SRpnt, STp, cmd, OS_FRAME_SIZE, DMA_TO_DEVICE,
STp->timeout, MAX_RETRIES, 1);
if (STp->buffer->syscall_result)
flag = 1;
else {
p += OS_DATA_SIZE; i++;
/* if we just sent the last frame, wait till all successfully written */
if ( i == nframes + pending ) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Check re-write successful\n", name);
#endif
memset(cmd, 0, MAX_COMMAND_SIZE);
cmd[0] = WRITE_FILEMARKS;
cmd[1] = 1;
SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE,
STp->timeout, MAX_RETRIES, 1);
#if DEBUG
if (debugging) {
printk(OSST_DEB_MSG "%s:D: Sleeping in re-write wait ready\n", name);
printk(OSST_DEB_MSG "%s:D: Turning off debugging for a while\n", name);
debugging = 0;
}
#endif
flag = STp->buffer->syscall_result;
while ( !flag && time_before(jiffies, startwait + 60*HZ) ) {
memset(cmd, 0, MAX_COMMAND_SIZE);
cmd[0] = TEST_UNIT_READY;
SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE, STp->timeout,
MAX_RETRIES, 1);
if (SRpnt->sense[2] == 2 && SRpnt->sense[12] == 4 &&
(SRpnt->sense[13] == 1 || SRpnt->sense[13] == 8)) {
/* in the process of becoming ready */
msleep(100);
continue;
}
if (STp->buffer->syscall_result)
flag = 1;
break;
}
#if DEBUG
debugging = dbg;
printk(OSST_DEB_MSG "%s:D: Wait re-write finished\n", name);
#endif
}
}
*aSRpnt = SRpnt;
if (flag) {
if ((SRpnt->sense[ 2] & 0x0f) == 13 &&
SRpnt->sense[12] == 0 &&
SRpnt->sense[13] == 2) {
printk(KERN_ERR "%s:E: Volume overflow in write error recovery\n", name);
vfree(buffer);
return (-EIO); /* hit end of tape = fail */
}
i = ((SRpnt->sense[3] << 24) |
(SRpnt->sense[4] << 16) |
(SRpnt->sense[5] << 8) |
SRpnt->sense[6] ) - new_frame;
p = &buffer[i * OS_DATA_SIZE];
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Additional write error at %d\n", name, new_frame+i);
#endif
osst_get_frame_position(STp, aSRpnt);
#if DEBUG
printk(OSST_DEB_MSG "%s:D: reported frame positions: host = %d, tape = %d, buffer = %d\n",
name, STp->first_frame_position, STp->last_frame_position, STp->cur_frames);
#endif
}
}
if (flag) {
/* error recovery did not successfully complete */
printk(KERN_ERR "%s:D: Write error recovery failed in %s\n", name,
STp->write_type == OS_WRITE_HEADER?"header":"body");
}
if (!pending)
osst_copy_to_buffer(STp->buffer, p); /* so buffer content == at entry in all cases */
vfree(buffer);
return 0;
}
static int osst_reposition_and_retry(struct osst_tape * STp, struct osst_request ** aSRpnt,
unsigned int frame, unsigned int skip, int pending)
{
unsigned char cmd[MAX_COMMAND_SIZE];
struct osst_request * SRpnt;
char * name = tape_name(STp);
int expected = 0;
int attempts = 1000 / skip;
int flag = 1;
unsigned long startwait = jiffies;
#if DEBUG
int dbg = debugging;
#endif
while (attempts && time_before(jiffies, startwait + 60*HZ)) {
if (flag) {
#if DEBUG
debugging = dbg;
#endif
if (frame < 2990 && frame+skip+STp->cur_frames+pending >= 2990)
frame = 3000-skip;
expected = frame+skip+STp->cur_frames+pending;
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Position to fppos %d, re-write from fseq %d\n",
name, frame+skip, STp->frame_seq_number-STp->cur_frames-pending);
#endif
osst_set_frame_position(STp, aSRpnt, frame + skip, 1);
flag = 0;
attempts--;
schedule_timeout_interruptible(msecs_to_jiffies(100));
}
if (osst_get_frame_position(STp, aSRpnt) < 0) { /* additional write error */
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Addl error, host %d, tape %d, buffer %d\n",
name, STp->first_frame_position,
STp->last_frame_position, STp->cur_frames);
#endif
frame = STp->last_frame_position;
flag = 1;
continue;
}
if (pending && STp->cur_frames < 50) {
memset(cmd, 0, MAX_COMMAND_SIZE);
cmd[0] = WRITE_6;
cmd[1] = 1;
cmd[4] = 1;
#if DEBUG
printk(OSST_DEB_MSG "%s:D: About to write pending fseq %d at fppos %d\n",
name, STp->frame_seq_number-1, STp->first_frame_position);
#endif
SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, OS_FRAME_SIZE, DMA_TO_DEVICE,
STp->timeout, MAX_RETRIES, 1);
*aSRpnt = SRpnt;
if (STp->buffer->syscall_result) { /* additional write error */
if ((SRpnt->sense[ 2] & 0x0f) == 13 &&
SRpnt->sense[12] == 0 &&
SRpnt->sense[13] == 2) {
printk(KERN_ERR
"%s:E: Volume overflow in write error recovery\n",
name);
break; /* hit end of tape = fail */
}
flag = 1;
}
else
pending = 0;
continue;
}
if (STp->cur_frames == 0) {
#if DEBUG
debugging = dbg;
printk(OSST_DEB_MSG "%s:D: Wait re-write finished\n", name);
#endif
if (STp->first_frame_position != expected) {
printk(KERN_ERR "%s:A: Actual position %d - expected %d\n",
name, STp->first_frame_position, expected);
return (-EIO);
}
return 0;
}
#if DEBUG
if (debugging) {
printk(OSST_DEB_MSG "%s:D: Sleeping in re-write wait ready\n", name);
printk(OSST_DEB_MSG "%s:D: Turning off debugging for a while\n", name);
debugging = 0;
}
#endif
schedule_timeout_interruptible(msecs_to_jiffies(100));
}
printk(KERN_ERR "%s:E: Failed to find valid tape media\n", name);
#if DEBUG
debugging = dbg;
#endif
return (-EIO);
}
/*
* Error recovery algorithm for the OnStream tape.
*/
static int osst_write_error_recovery(struct osst_tape * STp, struct osst_request ** aSRpnt, int pending)
{
struct osst_request * SRpnt = * aSRpnt;
struct st_partstat * STps = & STp->ps[STp->partition];
char * name = tape_name(STp);
int retval = 0;
int rw_state;
unsigned int frame, skip;
rw_state = STps->rw;
if ((SRpnt->sense[ 2] & 0x0f) != 3
|| SRpnt->sense[12] != 12
|| SRpnt->sense[13] != 0) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Write error recovery cannot handle %02x:%02x:%02x\n", name,
SRpnt->sense[2], SRpnt->sense[12], SRpnt->sense[13]);
#endif
return (-EIO);
}
frame = (SRpnt->sense[3] << 24) |
(SRpnt->sense[4] << 16) |
(SRpnt->sense[5] << 8) |
SRpnt->sense[6];
skip = SRpnt->sense[9];
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Detected physical bad frame at %u, advised to skip %d\n", name, frame, skip);
#endif
osst_get_frame_position(STp, aSRpnt);
#if DEBUG
printk(OSST_DEB_MSG "%s:D: reported frame positions: host = %d, tape = %d\n",
name, STp->first_frame_position, STp->last_frame_position);
#endif
switch (STp->write_type) {
case OS_WRITE_DATA:
case OS_WRITE_EOD:
case OS_WRITE_NEW_MARK:
printk(KERN_WARNING
"%s:I: Relocating %d buffered logical frames from position %u to %u\n",
name, STp->cur_frames, frame, (frame + skip > 3000 && frame < 3000)?3000:frame + skip);
if (STp->os_fw_rev >= 10600)
retval = osst_reposition_and_retry(STp, aSRpnt, frame, skip, pending);
else
retval = osst_read_back_buffer_and_rewrite(STp, aSRpnt, frame, skip, pending);
printk(KERN_WARNING "%s:%s: %sWrite error%srecovered\n", name,
retval?"E" :"I",
retval?"" :"Don't worry, ",
retval?" not ":" ");
break;
case OS_WRITE_LAST_MARK:
printk(KERN_ERR "%s:E: Bad frame in update last marker, fatal\n", name);
osst_set_frame_position(STp, aSRpnt, frame + STp->cur_frames + pending, 0);
retval = -EIO;
break;
case OS_WRITE_HEADER:
printk(KERN_WARNING "%s:I: Bad frame in header partition, skipped\n", name);
retval = osst_read_back_buffer_and_rewrite(STp, aSRpnt, frame, 1, pending);
break;
default:
printk(KERN_INFO "%s:I: Bad frame in filler, ignored\n", name);
osst_set_frame_position(STp, aSRpnt, frame + STp->cur_frames + pending, 0);
}
osst_get_frame_position(STp, aSRpnt);
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Positioning complete, cur_frames %d, pos %d, tape pos %d\n",
name, STp->cur_frames, STp->first_frame_position, STp->last_frame_position);
printk(OSST_DEB_MSG "%s:D: next logical frame to write: %d\n", name, STp->logical_blk_num);
#endif
if (retval == 0) {
STp->recover_count++;
STp->recover_erreg++;
} else
STp->abort_count++;
STps->rw = rw_state;
return retval;
}
static int osst_space_over_filemarks_backward(struct osst_tape * STp, struct osst_request ** aSRpnt,
int mt_op, int mt_count)
{
char * name = tape_name(STp);
int cnt;
int last_mark_ppos = -1;
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Reached space_over_filemarks_backwards %d %d\n", name, mt_op, mt_count);
#endif
if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks_bwd\n", name);
#endif
return -EIO;
}
if (STp->linux_media_version >= 4) {
/*
* direct lookup in header filemark list
*/
cnt = ntohl(STp->buffer->aux->filemark_cnt);
if (STp->header_ok &&
STp->header_cache != NULL &&
(cnt - mt_count) >= 0 &&
(cnt - mt_count) < OS_FM_TAB_MAX &&
(cnt - mt_count) < STp->filemark_cnt &&
STp->header_cache->dat_fm_tab.fm_tab_ent[cnt-1] == STp->buffer->aux->last_mark_ppos)
last_mark_ppos = ntohl(STp->header_cache->dat_fm_tab.fm_tab_ent[cnt - mt_count]);
#if DEBUG
if (STp->header_cache == NULL || (cnt - mt_count) < 0 || (cnt - mt_count) >= OS_FM_TAB_MAX)
printk(OSST_DEB_MSG "%s:D: Filemark lookup fail due to %s\n", name,
STp->header_cache == NULL?"lack of header cache":"count out of range");
else
printk(OSST_DEB_MSG "%s:D: Filemark lookup: prev mark %d (%s), skip %d to %d\n",
name, cnt,
((cnt == -1 && ntohl(STp->buffer->aux->last_mark_ppos) == -1) ||
(STp->header_cache->dat_fm_tab.fm_tab_ent[cnt-1] ==
STp->buffer->aux->last_mark_ppos))?"match":"error",
mt_count, last_mark_ppos);
#endif
if (last_mark_ppos > 10 && last_mark_ppos < STp->eod_frame_ppos) {
osst_position_tape_and_confirm(STp, aSRpnt, last_mark_ppos);
if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) {
#if DEBUG
printk(OSST_DEB_MSG
"%s:D: Couldn't get logical blk num in space_filemarks\n", name);
#endif
return (-EIO);
}
if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_MARKER) {
printk(KERN_WARNING "%s:W: Expected to find marker at ppos %d, not found\n",
name, last_mark_ppos);
return (-EIO);
}
goto found;
}
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Reverting to scan filemark backwards\n", name);
#endif
}
cnt = 0;
while (cnt != mt_count) {
last_mark_ppos = ntohl(STp->buffer->aux->last_mark_ppos);
if (last_mark_ppos == -1)
return (-EIO);
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Positioning to last mark at %d\n", name, last_mark_ppos);
#endif
osst_position_tape_and_confirm(STp, aSRpnt, last_mark_ppos);
cnt++;
if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks\n", name);
#endif
return (-EIO);
}
if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_MARKER) {
printk(KERN_WARNING "%s:W: Expected to find marker at ppos %d, not found\n",
name, last_mark_ppos);
return (-EIO);
}
}
found:
if (mt_op == MTBSFM) {
STp->frame_seq_number++;
STp->frame_in_buffer = 0;
STp->buffer->buffer_bytes = 0;
STp->buffer->read_pointer = 0;
STp->logical_blk_num += ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt);
}
return 0;
}
/*
* ADRL 1.1 compatible "slow" space filemarks fwd version
*
* Just scans for the filemark sequentially.
*/
static int osst_space_over_filemarks_forward_slow(struct osst_tape * STp, struct osst_request ** aSRpnt,
int mt_op, int mt_count)
{
int cnt = 0;
#if DEBUG
char * name = tape_name(STp);
printk(OSST_DEB_MSG "%s:D: Reached space_over_filemarks_forward_slow %d %d\n", name, mt_op, mt_count);
#endif
if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks_fwd\n", name);
#endif
return (-EIO);
}
while (1) {
if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks\n", name);
#endif
return (-EIO);
}
if (STp->buffer->aux->frame_type == OS_FRAME_TYPE_MARKER)
cnt++;
if (STp->buffer->aux->frame_type == OS_FRAME_TYPE_EOD) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: space_fwd: EOD reached\n", name);
#endif
if (STp->first_frame_position > STp->eod_frame_ppos+1) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: EOD position corrected (%d=>%d)\n",
name, STp->eod_frame_ppos, STp->first_frame_position-1);
#endif
STp->eod_frame_ppos = STp->first_frame_position-1;
}
return (-EIO);
}
if (cnt == mt_count)
break;
STp->frame_in_buffer = 0;
}
if (mt_op == MTFSF) {
STp->frame_seq_number++;
STp->frame_in_buffer = 0;
STp->buffer->buffer_bytes = 0;
STp->buffer->read_pointer = 0;
STp->logical_blk_num += ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt);
}
return 0;
}
/*
* Fast linux specific version of OnStream FSF
*/
static int osst_space_over_filemarks_forward_fast(struct osst_tape * STp, struct osst_request ** aSRpnt,
int mt_op, int mt_count)
{
char * name = tape_name(STp);
int cnt = 0,
next_mark_ppos = -1;
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Reached space_over_filemarks_forward_fast %d %d\n", name, mt_op, mt_count);
#endif
if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks_fwd\n", name);
#endif
return (-EIO);
}
if (STp->linux_media_version >= 4) {
/*
* direct lookup in header filemark list
*/
cnt = ntohl(STp->buffer->aux->filemark_cnt) - 1;
if (STp->header_ok &&
STp->header_cache != NULL &&
(cnt + mt_count) < OS_FM_TAB_MAX &&
(cnt + mt_count) < STp->filemark_cnt &&
((cnt == -1 && ntohl(STp->buffer->aux->last_mark_ppos) == -1) ||
(STp->header_cache->dat_fm_tab.fm_tab_ent[cnt] == STp->buffer->aux->last_mark_ppos)))
next_mark_ppos = ntohl(STp->header_cache->dat_fm_tab.fm_tab_ent[cnt + mt_count]);
#if DEBUG
if (STp->header_cache == NULL || (cnt + mt_count) >= OS_FM_TAB_MAX)
printk(OSST_DEB_MSG "%s:D: Filemark lookup fail due to %s\n", name,
STp->header_cache == NULL?"lack of header cache":"count out of range");
else
printk(OSST_DEB_MSG "%s:D: Filemark lookup: prev mark %d (%s), skip %d to %d\n",
name, cnt,
((cnt == -1 && ntohl(STp->buffer->aux->last_mark_ppos) == -1) ||
(STp->header_cache->dat_fm_tab.fm_tab_ent[cnt] ==
STp->buffer->aux->last_mark_ppos))?"match":"error",
mt_count, next_mark_ppos);
#endif
if (next_mark_ppos <= 10 || next_mark_ppos > STp->eod_frame_ppos) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Reverting to slow filemark space\n", name);
#endif
return osst_space_over_filemarks_forward_slow(STp, aSRpnt, mt_op, mt_count);
} else {
osst_position_tape_and_confirm(STp, aSRpnt, next_mark_ppos);
if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks\n",
name);
#endif
return (-EIO);
}
if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_MARKER) {
printk(KERN_WARNING "%s:W: Expected to find marker at ppos %d, not found\n",
name, next_mark_ppos);
return (-EIO);
}
if (ntohl(STp->buffer->aux->filemark_cnt) != cnt + mt_count) {
printk(KERN_WARNING "%s:W: Expected to find marker %d at ppos %d, not %d\n",
name, cnt+mt_count, next_mark_ppos,
ntohl(STp->buffer->aux->filemark_cnt));
return (-EIO);
}
}
} else {
/*
* Find nearest (usually previous) marker, then jump from marker to marker
*/
while (1) {
if (STp->buffer->aux->frame_type == OS_FRAME_TYPE_MARKER)
break;
if (STp->buffer->aux->frame_type == OS_FRAME_TYPE_EOD) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: space_fwd: EOD reached\n", name);
#endif
return (-EIO);
}
if (ntohl(STp->buffer->aux->filemark_cnt) == 0) {
if (STp->first_mark_ppos == -1) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Reverting to slow filemark space\n", name);
#endif
return osst_space_over_filemarks_forward_slow(STp, aSRpnt, mt_op, mt_count);
}
osst_position_tape_and_confirm(STp, aSRpnt, STp->first_mark_ppos);
if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) {
#if DEBUG
printk(OSST_DEB_MSG
"%s:D: Couldn't get logical blk num in space_filemarks_fwd_fast\n",
name);
#endif
return (-EIO);
}
if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_MARKER) {
printk(KERN_WARNING "%s:W: Expected to find filemark at %d\n",
name, STp->first_mark_ppos);
return (-EIO);
}
} else {
if (osst_space_over_filemarks_backward(STp, aSRpnt, MTBSF, 1) < 0)
return (-EIO);
mt_count++;
}
}
cnt++;
while (cnt != mt_count) {
next_mark_ppos = ntohl(STp->buffer->aux->next_mark_ppos);
if (!next_mark_ppos || next_mark_ppos > STp->eod_frame_ppos) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Reverting to slow filemark space\n", name);
#endif
return osst_space_over_filemarks_forward_slow(STp, aSRpnt, mt_op, mt_count - cnt);
}
#if DEBUG
else printk(OSST_DEB_MSG "%s:D: Positioning to next mark at %d\n", name, next_mark_ppos);
#endif
osst_position_tape_and_confirm(STp, aSRpnt, next_mark_ppos);
cnt++;
if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks\n",
name);
#endif
return (-EIO);
}
if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_MARKER) {
printk(KERN_WARNING "%s:W: Expected to find marker at ppos %d, not found\n",
name, next_mark_ppos);
return (-EIO);
}
}
}
if (mt_op == MTFSF) {
STp->frame_seq_number++;
STp->frame_in_buffer = 0;
STp->buffer->buffer_bytes = 0;
STp->buffer->read_pointer = 0;
STp->logical_blk_num += ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt);
}
return 0;
}
/*
* In debug mode, we want to see as many errors as possible
* to test the error recovery mechanism.
*/
#if DEBUG
static void osst_set_retries(struct osst_tape * STp, struct osst_request ** aSRpnt, int retries)
{
unsigned char cmd[MAX_COMMAND_SIZE];
struct osst_request * SRpnt = * aSRpnt;
char * name = tape_name(STp);
memset(cmd, 0, MAX_COMMAND_SIZE);
cmd[0] = MODE_SELECT;
cmd[1] = 0x10;
cmd[4] = NUMBER_RETRIES_PAGE_LENGTH + MODE_HEADER_LENGTH;
(STp->buffer)->b_data[0] = cmd[4] - 1;
(STp->buffer)->b_data[1] = 0; /* Medium Type - ignoring */
(STp->buffer)->b_data[2] = 0; /* Reserved */
(STp->buffer)->b_data[3] = 0; /* Block Descriptor Length */
(STp->buffer)->b_data[MODE_HEADER_LENGTH + 0] = NUMBER_RETRIES_PAGE | (1 << 7);
(STp->buffer)->b_data[MODE_HEADER_LENGTH + 1] = 2;
(STp->buffer)->b_data[MODE_HEADER_LENGTH + 2] = 4;
(STp->buffer)->b_data[MODE_HEADER_LENGTH + 3] = retries;
if (debugging)
printk(OSST_DEB_MSG "%s:D: Setting number of retries on OnStream tape to %d\n", name, retries);
SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_TO_DEVICE, STp->timeout, 0, 1);
*aSRpnt = SRpnt;
if ((STp->buffer)->syscall_result)
printk (KERN_ERR "%s:D: Couldn't set retries to %d\n", name, retries);
}
#endif
static int osst_write_filemark(struct osst_tape * STp, struct osst_request ** aSRpnt)
{
int result;
int this_mark_ppos = STp->first_frame_position;
int this_mark_lbn = STp->logical_blk_num;
#if DEBUG
char * name = tape_name(STp);
#endif
if (STp->raw) return 0;
STp->write_type = OS_WRITE_NEW_MARK;
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Writing Filemark %i at fppos %d (fseq %d, lblk %d)\n",
name, STp->filemark_cnt, this_mark_ppos, STp->frame_seq_number, this_mark_lbn);
#endif
STp->dirty = 1;
result = osst_flush_write_buffer(STp, aSRpnt);
result |= osst_flush_drive_buffer(STp, aSRpnt);
STp->last_mark_ppos = this_mark_ppos;
STp->last_mark_lbn = this_mark_lbn;
if (STp->header_cache != NULL && STp->filemark_cnt < OS_FM_TAB_MAX)
STp->header_cache->dat_fm_tab.fm_tab_ent[STp->filemark_cnt] = htonl(this_mark_ppos);
if (STp->filemark_cnt++ == 0)
STp->first_mark_ppos = this_mark_ppos;
return result;
}
static int osst_write_eod(struct osst_tape * STp, struct osst_request ** aSRpnt)
{
int result;
#if DEBUG
char * name = tape_name(STp);
#endif
if (STp->raw) return 0;
STp->write_type = OS_WRITE_EOD;
STp->eod_frame_ppos = STp->first_frame_position;
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Writing EOD at fppos %d (fseq %d, lblk %d)\n", name,
STp->eod_frame_ppos, STp->frame_seq_number, STp->logical_blk_num);
#endif
STp->dirty = 1;
result = osst_flush_write_buffer(STp, aSRpnt);
result |= osst_flush_drive_buffer(STp, aSRpnt);
STp->eod_frame_lfa = --(STp->frame_seq_number);
return result;
}
static int osst_write_filler(struct osst_tape * STp, struct osst_request ** aSRpnt, int where, int count)
{
char * name = tape_name(STp);
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Reached onstream write filler group %d\n", name, where);
#endif
osst_wait_ready(STp, aSRpnt, 60 * 5, 0);
osst_set_frame_position(STp, aSRpnt, where, 0);
STp->write_type = OS_WRITE_FILLER;
while (count--) {
memcpy(STp->buffer->b_data, "Filler", 6);
STp->buffer->buffer_bytes = 6;
STp->dirty = 1;
if (osst_flush_write_buffer(STp, aSRpnt)) {
printk(KERN_INFO "%s:I: Couldn't write filler frame\n", name);
return (-EIO);
}
}
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Exiting onstream write filler group\n", name);
#endif
return osst_flush_drive_buffer(STp, aSRpnt);
}
static int __osst_write_header(struct osst_tape * STp, struct osst_request ** aSRpnt, int where, int count)
{
char * name = tape_name(STp);
int result;
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Reached onstream write header group %d\n", name, where);
#endif
osst_wait_ready(STp, aSRpnt, 60 * 5, 0);
osst_set_frame_position(STp, aSRpnt, where, 0);
STp->write_type = OS_WRITE_HEADER;
while (count--) {
osst_copy_to_buffer(STp->buffer, (unsigned char *)STp->header_cache);
STp->buffer->buffer_bytes = sizeof(os_header_t);
STp->dirty = 1;
if (osst_flush_write_buffer(STp, aSRpnt)) {
printk(KERN_INFO "%s:I: Couldn't write header frame\n", name);
return (-EIO);
}
}
result = osst_flush_drive_buffer(STp, aSRpnt);
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Write onstream header group %s\n", name, result?"failed":"done");
#endif
return result;
}
static int osst_write_header(struct osst_tape * STp, struct osst_request ** aSRpnt, int locate_eod)
{
os_header_t * header;
int result;
char * name = tape_name(STp);
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Writing tape header\n", name);
#endif
if (STp->raw) return 0;
if (STp->header_cache == NULL) {
if ((STp->header_cache = (os_header_t *)vmalloc(sizeof(os_header_t))) == NULL) {
printk(KERN_ERR "%s:E: Failed to allocate header cache\n", name);
return (-ENOMEM);
}
memset(STp->header_cache, 0, sizeof(os_header_t));
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Allocated and cleared memory for header cache\n", name);
#endif
}
if (STp->header_ok) STp->update_frame_cntr++;
else STp->update_frame_cntr = 0;
header = STp->header_cache;
strcpy(header->ident_str, "ADR_SEQ");
header->major_rev = 1;
header->minor_rev = 4;
header->ext_trk_tb_off = htons(17192);
header->pt_par_num = 1;
header->partition[0].partition_num = OS_DATA_PARTITION;
header->partition[0].par_desc_ver = OS_PARTITION_VERSION;
header->partition[0].wrt_pass_cntr = htons(STp->wrt_pass_cntr);
header->partition[0].first_frame_ppos = htonl(STp->first_data_ppos);
header->partition[0].last_frame_ppos = htonl(STp->capacity);
header->partition[0].eod_frame_ppos = htonl(STp->eod_frame_ppos);
header->cfg_col_width = htonl(20);
header->dat_col_width = htonl(1500);
header->qfa_col_width = htonl(0);
header->ext_track_tb.nr_stream_part = 1;
header->ext_track_tb.et_ent_sz = 32;
header->ext_track_tb.dat_ext_trk_ey.et_part_num = 0;
header->ext_track_tb.dat_ext_trk_ey.fmt = 1;
header->ext_track_tb.dat_ext_trk_ey.fm_tab_off = htons(17736);
header->ext_track_tb.dat_ext_trk_ey.last_hlb_hi = 0;
header->ext_track_tb.dat_ext_trk_ey.last_hlb = htonl(STp->eod_frame_lfa);
header->ext_track_tb.dat_ext_trk_ey.last_pp = htonl(STp->eod_frame_ppos);
header->dat_fm_tab.fm_part_num = 0;
header->dat_fm_tab.fm_tab_ent_sz = 4;
header->dat_fm_tab.fm_tab_ent_cnt = htons(STp->filemark_cnt<OS_FM_TAB_MAX?
STp->filemark_cnt:OS_FM_TAB_MAX);
result = __osst_write_header(STp, aSRpnt, 0xbae, 5);
if (STp->update_frame_cntr == 0)
osst_write_filler(STp, aSRpnt, 0xbb3, 5);
result &= __osst_write_header(STp, aSRpnt, 5, 5);
if (locate_eod) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Locating back to eod frame addr %d\n", name, STp->eod_frame_ppos);
#endif
osst_set_frame_position(STp, aSRpnt, STp->eod_frame_ppos, 0);
}
if (result)
printk(KERN_ERR "%s:E: Write header failed\n", name);
else {
memcpy(STp->application_sig, "LIN4", 4);
STp->linux_media = 1;
STp->linux_media_version = 4;
STp->header_ok = 1;
}
return result;
}
static int osst_reset_header(struct osst_tape * STp, struct osst_request ** aSRpnt)
{
if (STp->header_cache != NULL)
memset(STp->header_cache, 0, sizeof(os_header_t));
STp->logical_blk_num = STp->frame_seq_number = 0;
STp->frame_in_buffer = 0;
STp->eod_frame_ppos = STp->first_data_ppos = 0x0000000A;
STp->filemark_cnt = 0;
STp->first_mark_ppos = STp->last_mark_ppos = STp->last_mark_lbn = -1;
return osst_write_header(STp, aSRpnt, 1);
}
static int __osst_analyze_headers(struct osst_tape * STp, struct osst_request ** aSRpnt, int ppos)
{
char * name = tape_name(STp);
os_header_t * header;
os_aux_t * aux;
char id_string[8];
int linux_media_version,
update_frame_cntr;
if (STp->raw)
return 1;
if (ppos == 5 || ppos == 0xbae || STp->buffer->syscall_result) {
if (osst_set_frame_position(STp, aSRpnt, ppos, 0))
printk(KERN_WARNING "%s:W: Couldn't position tape\n", name);
osst_wait_ready(STp, aSRpnt, 60 * 15, 0);
if (osst_initiate_read (STp, aSRpnt)) {
printk(KERN_WARNING "%s:W: Couldn't initiate read\n", name);
return 0;
}
}
if (osst_read_frame(STp, aSRpnt, 180)) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Couldn't read header frame\n", name);
#endif
return 0;
}
header = (os_header_t *) STp->buffer->b_data; /* warning: only first segment addressable */
aux = STp->buffer->aux;
if (aux->frame_type != OS_FRAME_TYPE_HEADER) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Skipping non-header frame (%d)\n", name, ppos);
#endif
return 0;
}
if (ntohl(aux->frame_seq_num) != 0 ||
ntohl(aux->logical_blk_num) != 0 ||
aux->partition.partition_num != OS_CONFIG_PARTITION ||
ntohl(aux->partition.first_frame_ppos) != 0 ||
ntohl(aux->partition.last_frame_ppos) != 0xbb7 ) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Invalid header frame (%d,%d,%d,%d,%d)\n", name,
ntohl(aux->frame_seq_num), ntohl(aux->logical_blk_num),
aux->partition.partition_num, ntohl(aux->partition.first_frame_ppos),
ntohl(aux->partition.last_frame_ppos));
#endif
return 0;
}
if (strncmp(header->ident_str, "ADR_SEQ", 7) != 0 &&
strncmp(header->ident_str, "ADR-SEQ", 7) != 0) {
strlcpy(id_string, header->ident_str, 8);
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Invalid header identification string %s\n", name, id_string);
#endif
return 0;
}
update_frame_cntr = ntohl(aux->update_frame_cntr);
if (update_frame_cntr < STp->update_frame_cntr) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Skipping frame %d with update_frame_counter %d<%d\n",
name, ppos, update_frame_cntr, STp->update_frame_cntr);
#endif
return 0;
}
if (header->major_rev != 1 || header->minor_rev != 4 ) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: %s revision %d.%d detected (1.4 supported)\n",
name, (header->major_rev != 1 || header->minor_rev < 2 ||
header->minor_rev > 4 )? "Invalid" : "Warning:",
header->major_rev, header->minor_rev);
#endif
if (header->major_rev != 1 || header->minor_rev < 2 || header->minor_rev > 4)
return 0;
}
#if DEBUG
if (header->pt_par_num != 1)
printk(KERN_INFO "%s:W: %d partitions defined, only one supported\n",
name, header->pt_par_num);
#endif
memcpy(id_string, aux->application_sig, 4);
id_string[4] = 0;
if (memcmp(id_string, "LIN", 3) == 0) {
STp->linux_media = 1;
linux_media_version = id_string[3] - '0';
if (linux_media_version != 4)
printk(KERN_INFO "%s:I: Linux media version %d detected (current 4)\n",
name, linux_media_version);
} else {
printk(KERN_WARNING "%s:W: Non Linux media detected (%s)\n", name, id_string);
return 0;
}
if (linux_media_version < STp->linux_media_version) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Skipping frame %d with linux_media_version %d\n",
name, ppos, linux_media_version);
#endif
return 0;
}
if (linux_media_version > STp->linux_media_version) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Frame %d sets linux_media_version to %d\n",
name, ppos, linux_media_version);
#endif
memcpy(STp->application_sig, id_string, 5);
STp->linux_media_version = linux_media_version;
STp->update_frame_cntr = -1;
}
if (update_frame_cntr > STp->update_frame_cntr) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Frame %d sets update_frame_counter to %d\n",
name, ppos, update_frame_cntr);
#endif
if (STp->header_cache == NULL) {
if ((STp->header_cache = (os_header_t *)vmalloc(sizeof(os_header_t))) == NULL) {
printk(KERN_ERR "%s:E: Failed to allocate header cache\n", name);
return 0;
}
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Allocated memory for header cache\n", name);
#endif
}
osst_copy_from_buffer(STp->buffer, (unsigned char *)STp->header_cache);
header = STp->header_cache; /* further accesses from cached (full) copy */
STp->wrt_pass_cntr = ntohs(header->partition[0].wrt_pass_cntr);
STp->first_data_ppos = ntohl(header->partition[0].first_frame_ppos);
STp->eod_frame_ppos = ntohl(header->partition[0].eod_frame_ppos);
STp->eod_frame_lfa = ntohl(header->ext_track_tb.dat_ext_trk_ey.last_hlb);
STp->filemark_cnt = ntohl(aux->filemark_cnt);
STp->first_mark_ppos = ntohl(aux->next_mark_ppos);
STp->last_mark_ppos = ntohl(aux->last_mark_ppos);
STp->last_mark_lbn = ntohl(aux->last_mark_lbn);
STp->update_frame_cntr = update_frame_cntr;
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Detected write pass %d, update frame counter %d, filemark counter %d\n",
name, STp->wrt_pass_cntr, STp->update_frame_cntr, STp->filemark_cnt);
printk(OSST_DEB_MSG "%s:D: first data frame on tape = %d, last = %d, eod frame = %d\n", name,
STp->first_data_ppos,
ntohl(header->partition[0].last_frame_ppos),
ntohl(header->partition[0].eod_frame_ppos));
printk(OSST_DEB_MSG "%s:D: first mark on tape = %d, last = %d, eod frame = %d\n",
name, STp->first_mark_ppos, STp->last_mark_ppos, STp->eod_frame_ppos);
#endif
if (header->minor_rev < 4 && STp->linux_media_version == 4) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Moving filemark list to ADR 1.4 location\n", name);
#endif
memcpy((void *)header->dat_fm_tab.fm_tab_ent,
(void *)header->old_filemark_list, sizeof(header->dat_fm_tab.fm_tab_ent));
memset((void *)header->old_filemark_list, 0, sizeof(header->old_filemark_list));
}
if (header->minor_rev == 4 &&
(header->ext_trk_tb_off != htons(17192) ||
header->partition[0].partition_num != OS_DATA_PARTITION ||
header->partition[0].par_desc_ver != OS_PARTITION_VERSION ||
header->partition[0].last_frame_ppos != htonl(STp->capacity) ||
header->cfg_col_width != htonl(20) ||
header->dat_col_width != htonl(1500) ||
header->qfa_col_width != htonl(0) ||
header->ext_track_tb.nr_stream_part != 1 ||
header->ext_track_tb.et_ent_sz != 32 ||
header->ext_track_tb.dat_ext_trk_ey.et_part_num != OS_DATA_PARTITION ||
header->ext_track_tb.dat_ext_trk_ey.fmt != 1 ||
header->ext_track_tb.dat_ext_trk_ey.fm_tab_off != htons(17736) ||
header->ext_track_tb.dat_ext_trk_ey.last_hlb_hi != 0 ||
header->ext_track_tb.dat_ext_trk_ey.last_pp != htonl(STp->eod_frame_ppos) ||
header->dat_fm_tab.fm_part_num != OS_DATA_PARTITION ||
header->dat_fm_tab.fm_tab_ent_sz != 4 ||
header->dat_fm_tab.fm_tab_ent_cnt !=
htons(STp->filemark_cnt<OS_FM_TAB_MAX?STp->filemark_cnt:OS_FM_TAB_MAX)))
printk(KERN_WARNING "%s:W: Failed consistency check ADR 1.4 format\n", name);
}
return 1;
}
static int osst_analyze_headers(struct osst_tape * STp, struct osst_request ** aSRpnt)
{
int position, ppos;
int first, last;
int valid = 0;
char * name = tape_name(STp);
position = osst_get_frame_position(STp, aSRpnt);
if (STp->raw) {
STp->header_ok = STp->linux_media = 1;
STp->linux_media_version = 0;
return 1;
}
STp->header_ok = STp->linux_media = STp->linux_media_version = 0;
STp->wrt_pass_cntr = STp->update_frame_cntr = -1;
STp->eod_frame_ppos = STp->first_data_ppos = -1;
STp->first_mark_ppos = STp->last_mark_ppos = STp->last_mark_lbn = -1;
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Reading header\n", name);
#endif
/* optimization for speed - if we are positioned at ppos 10, read second group first */
/* TODO try the ADR 1.1 locations for the second group if we have no valid one yet... */
first = position==10?0xbae: 5;
last = position==10?0xbb3:10;
for (ppos = first; ppos < last; ppos++)
if (__osst_analyze_headers(STp, aSRpnt, ppos))
valid = 1;
first = position==10? 5:0xbae;
last = position==10?10:0xbb3;
for (ppos = first; ppos < last; ppos++)
if (__osst_analyze_headers(STp, aSRpnt, ppos))
valid = 1;
if (!valid) {
printk(KERN_ERR "%s:E: Failed to find valid ADRL header, new media?\n", name);
STp->eod_frame_ppos = STp->first_data_ppos = 0;
osst_set_frame_position(STp, aSRpnt, 10, 0);
return 0;
}
if (position <= STp->first_data_ppos) {
position = STp->first_data_ppos;
STp->ps[0].drv_file = STp->ps[0].drv_block = STp->frame_seq_number = STp->logical_blk_num = 0;
}
osst_set_frame_position(STp, aSRpnt, position, 0);
STp->header_ok = 1;
return 1;
}
static int osst_verify_position(struct osst_tape * STp, struct osst_request ** aSRpnt)
{
int frame_position = STp->first_frame_position;
int frame_seq_numbr = STp->frame_seq_number;
int logical_blk_num = STp->logical_blk_num;
int halfway_frame = STp->frame_in_buffer;
int read_pointer = STp->buffer->read_pointer;
int prev_mark_ppos = -1;
int actual_mark_ppos, i, n;
#if DEBUG
char * name = tape_name(STp);
printk(OSST_DEB_MSG "%s:D: Verify that the tape is really the one we think before writing\n", name);
#endif
osst_set_frame_position(STp, aSRpnt, frame_position - 1, 0);
if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in verify_position\n", name);
#endif
return (-EIO);
}
if (STp->linux_media_version >= 4) {
for (i=0; i<STp->filemark_cnt; i++)
if ((n=ntohl(STp->header_cache->dat_fm_tab.fm_tab_ent[i])) < frame_position)
prev_mark_ppos = n;
} else
prev_mark_ppos = frame_position - 1; /* usually - we don't really know */
actual_mark_ppos = STp->buffer->aux->frame_type == OS_FRAME_TYPE_MARKER ?
frame_position - 1 : ntohl(STp->buffer->aux->last_mark_ppos);
if (frame_position != STp->first_frame_position ||
frame_seq_numbr != STp->frame_seq_number + (halfway_frame?0:1) ||
prev_mark_ppos != actual_mark_ppos ) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Block mismatch: fppos %d-%d, fseq %d-%d, mark %d-%d\n", name,
STp->first_frame_position, frame_position,
STp->frame_seq_number + (halfway_frame?0:1),
frame_seq_numbr, actual_mark_ppos, prev_mark_ppos);
#endif
return (-EIO);
}
if (halfway_frame) {
/* prepare buffer for append and rewrite on top of original */
osst_set_frame_position(STp, aSRpnt, frame_position - 1, 0);
STp->buffer->buffer_bytes = read_pointer;
STp->ps[STp->partition].rw = ST_WRITING;
STp->dirty = 1;
}
STp->frame_in_buffer = halfway_frame;
STp->frame_seq_number = frame_seq_numbr;
STp->logical_blk_num = logical_blk_num;
return 0;
}
/* Acc. to OnStream, the vers. numbering is the following:
* X.XX for released versions (X=digit),
* XXXY for unreleased versions (Y=letter)
* Ordering 1.05 < 106A < 106B < ... < 106a < ... < 1.06
* This fn makes monoton numbers out of this scheme ...
*/
static unsigned int osst_parse_firmware_rev (const char * str)
{
if (str[1] == '.') {
return (str[0]-'0')*10000
+(str[2]-'0')*1000
+(str[3]-'0')*100;
} else {
return (str[0]-'0')*10000
+(str[1]-'0')*1000
+(str[2]-'0')*100 - 100
+(str[3]-'@');
}
}
/*
* Configure the OnStream SCII tape drive for default operation
*/
static int osst_configure_onstream(struct osst_tape *STp, struct osst_request ** aSRpnt)
{
unsigned char cmd[MAX_COMMAND_SIZE];
char * name = tape_name(STp);
struct osst_request * SRpnt = * aSRpnt;
osst_mode_parameter_header_t * header;
osst_block_size_page_t * bs;
osst_capabilities_page_t * cp;
osst_tape_paramtr_page_t * prm;
int drive_buffer_size;
if (STp->ready != ST_READY) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Not Ready\n", name);
#endif
return (-EIO);
}
if (STp->os_fw_rev < 10600) {
printk(KERN_INFO "%s:I: Old OnStream firmware revision detected (%s),\n", name, STp->device->rev);
printk(KERN_INFO "%s:I: an upgrade to version 1.06 or above is recommended\n", name);
}
/*
* Configure 32.5KB (data+aux) frame size.
* Get the current frame size from the block size mode page
*/
memset(cmd, 0, MAX_COMMAND_SIZE);
cmd[0] = MODE_SENSE;
cmd[1] = 8;
cmd[2] = BLOCK_SIZE_PAGE;
cmd[4] = BLOCK_SIZE_PAGE_LENGTH + MODE_HEADER_LENGTH;
SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_FROM_DEVICE, STp->timeout, 0, 1);
if (SRpnt == NULL) {
#if DEBUG
printk(OSST_DEB_MSG "osst :D: Busy\n");
#endif
return (-EBUSY);
}
*aSRpnt = SRpnt;
if ((STp->buffer)->syscall_result != 0) {
printk (KERN_ERR "%s:E: Can't get tape block size mode page\n", name);
return (-EIO);
}
header = (osst_mode_parameter_header_t *) (STp->buffer)->b_data;
bs = (osst_block_size_page_t *) ((STp->buffer)->b_data + sizeof(osst_mode_parameter_header_t) + header->bdl);
#if DEBUG
printk(OSST_DEB_MSG "%s:D: 32KB play back: %s\n", name, bs->play32 ? "Yes" : "No");
printk(OSST_DEB_MSG "%s:D: 32.5KB play back: %s\n", name, bs->play32_5 ? "Yes" : "No");
printk(OSST_DEB_MSG "%s:D: 32KB record: %s\n", name, bs->record32 ? "Yes" : "No");
printk(OSST_DEB_MSG "%s:D: 32.5KB record: %s\n", name, bs->record32_5 ? "Yes" : "No");
#endif
/*
* Configure default auto columns mode, 32.5KB transfer mode
*/
bs->one = 1;
bs->play32 = 0;
bs->play32_5 = 1;
bs->record32 = 0;
bs->record32_5 = 1;
memset(cmd, 0, MAX_COMMAND_SIZE);
cmd[0] = MODE_SELECT;
cmd[1] = 0x10;
cmd[4] = BLOCK_SIZE_PAGE_LENGTH + MODE_HEADER_LENGTH;
SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_TO_DEVICE, STp->timeout, 0, 1);
*aSRpnt = SRpnt;
if ((STp->buffer)->syscall_result != 0) {
printk (KERN_ERR "%s:E: Couldn't set tape block size mode page\n", name);
return (-EIO);
}
#if DEBUG
printk(KERN_INFO "%s:D: Drive Block Size changed to 32.5K\n", name);
/*
* In debug mode, we want to see as many errors as possible
* to test the error recovery mechanism.
*/
osst_set_retries(STp, aSRpnt, 0);
SRpnt = * aSRpnt;
#endif
/*
* Set vendor name to 'LIN4' for "Linux support version 4".
*/
memset(cmd, 0, MAX_COMMAND_SIZE);
cmd[0] = MODE_SELECT;
cmd[1] = 0x10;
cmd[4] = VENDOR_IDENT_PAGE_LENGTH + MODE_HEADER_LENGTH;
header->mode_data_length = VENDOR_IDENT_PAGE_LENGTH + MODE_HEADER_LENGTH - 1;
header->medium_type = 0; /* Medium Type - ignoring */
header->dsp = 0; /* Reserved */
header->bdl = 0; /* Block Descriptor Length */
(STp->buffer)->b_data[MODE_HEADER_LENGTH + 0] = VENDOR_IDENT_PAGE | (1 << 7);
(STp->buffer)->b_data[MODE_HEADER_LENGTH + 1] = 6;
(STp->buffer)->b_data[MODE_HEADER_LENGTH + 2] = 'L';
(STp->buffer)->b_data[MODE_HEADER_LENGTH + 3] = 'I';
(STp->buffer)->b_data[MODE_HEADER_LENGTH + 4] = 'N';
(STp->buffer)->b_data[MODE_HEADER_LENGTH + 5] = '4';
(STp->buffer)->b_data[MODE_HEADER_LENGTH + 6] = 0;
(STp->buffer)->b_data[MODE_HEADER_LENGTH + 7] = 0;
SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_TO_DEVICE, STp->timeout, 0, 1);
*aSRpnt = SRpnt;
if ((STp->buffer)->syscall_result != 0) {
printk (KERN_ERR "%s:E: Couldn't set vendor name to %s\n", name,
(char *) ((STp->buffer)->b_data + MODE_HEADER_LENGTH + 2));
return (-EIO);
}
memset(cmd, 0, MAX_COMMAND_SIZE);
cmd[0] = MODE_SENSE;
cmd[1] = 8;
cmd[2] = CAPABILITIES_PAGE;
cmd[4] = CAPABILITIES_PAGE_LENGTH + MODE_HEADER_LENGTH;
SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_FROM_DEVICE, STp->timeout, 0, 1);
*aSRpnt = SRpnt;
if ((STp->buffer)->syscall_result != 0) {
printk (KERN_ERR "%s:E: Can't get capabilities page\n", name);
return (-EIO);
}
header = (osst_mode_parameter_header_t *) (STp->buffer)->b_data;
cp = (osst_capabilities_page_t *) ((STp->buffer)->b_data +
sizeof(osst_mode_parameter_header_t) + header->bdl);
drive_buffer_size = ntohs(cp->buffer_size) / 2;
memset(cmd, 0, MAX_COMMAND_SIZE);
cmd[0] = MODE_SENSE;
cmd[1] = 8;
cmd[2] = TAPE_PARAMTR_PAGE;
cmd[4] = TAPE_PARAMTR_PAGE_LENGTH + MODE_HEADER_LENGTH;
SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_FROM_DEVICE, STp->timeout, 0, 1);
*aSRpnt = SRpnt;
if ((STp->buffer)->syscall_result != 0) {
printk (KERN_ERR "%s:E: Can't get tape parameter page\n", name);
return (-EIO);
}
header = (osst_mode_parameter_header_t *) (STp->buffer)->b_data;
prm = (osst_tape_paramtr_page_t *) ((STp->buffer)->b_data +
sizeof(osst_mode_parameter_header_t) + header->bdl);
STp->density = prm->density;
STp->capacity = ntohs(prm->segtrk) * ntohs(prm->trks);
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Density %d, tape length: %dMB, drive buffer size: %dKB\n",
name, STp->density, STp->capacity / 32, drive_buffer_size);
#endif
return 0;
}
/* Step over EOF if it has been inadvertently crossed (ioctl not used because
it messes up the block number). */
static int cross_eof(struct osst_tape *STp, struct osst_request ** aSRpnt, int forward)
{
int result;
char * name = tape_name(STp);
#if DEBUG
if (debugging)
printk(OSST_DEB_MSG "%s:D: Stepping over filemark %s.\n",
name, forward ? "forward" : "backward");
#endif
if (forward) {
/* assumes that the filemark is already read by the drive, so this is low cost */
result = osst_space_over_filemarks_forward_slow(STp, aSRpnt, MTFSF, 1);
}
else
/* assumes this is only called if we just read the filemark! */
result = osst_seek_logical_blk(STp, aSRpnt, STp->logical_blk_num - 1);
if (result < 0)
printk(KERN_WARNING "%s:W: Stepping over filemark %s failed.\n",
name, forward ? "forward" : "backward");
return result;
}
/* Get the tape position. */
static int osst_get_frame_position(struct osst_tape *STp, struct osst_request ** aSRpnt)
{
unsigned char scmd[MAX_COMMAND_SIZE];
struct osst_request * SRpnt;
int result = 0;
char * name = tape_name(STp);
/* KG: We want to be able to use it for checking Write Buffer availability
* and thus don't want to risk to overwrite anything. Exchange buffers ... */
char mybuf[24];
char * olddata = STp->buffer->b_data;
int oldsize = STp->buffer->buffer_size;
if (STp->ready != ST_READY) return (-EIO);
memset (scmd, 0, MAX_COMMAND_SIZE);
scmd[0] = READ_POSITION;
STp->buffer->b_data = mybuf; STp->buffer->buffer_size = 24;
SRpnt = osst_do_scsi(*aSRpnt, STp, scmd, 20, DMA_FROM_DEVICE,
STp->timeout, MAX_RETRIES, 1);
if (!SRpnt) {
STp->buffer->b_data = olddata; STp->buffer->buffer_size = oldsize;
return (-EBUSY);
}
*aSRpnt = SRpnt;
if (STp->buffer->syscall_result)
result = ((SRpnt->sense[2] & 0x0f) == 3) ? -EIO : -EINVAL; /* 3: Write Error */
if (result == -EINVAL)
printk(KERN_ERR "%s:E: Can't read tape position.\n", name);
else {
if (result == -EIO) { /* re-read position - this needs to preserve media errors */
unsigned char mysense[16];
memcpy (mysense, SRpnt->sense, 16);
memset (scmd, 0, MAX_COMMAND_SIZE);
scmd[0] = READ_POSITION;
STp->buffer->b_data = mybuf; STp->buffer->buffer_size = 24;
SRpnt = osst_do_scsi(SRpnt, STp, scmd, 20, DMA_FROM_DEVICE,
STp->timeout, MAX_RETRIES, 1);
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Reread position, reason=[%02x:%02x:%02x], result=[%s%02x:%02x:%02x]\n",
name, mysense[2], mysense[12], mysense[13], STp->buffer->syscall_result?"":"ok:",
SRpnt->sense[2],SRpnt->sense[12],SRpnt->sense[13]);
#endif
if (!STp->buffer->syscall_result)
memcpy (SRpnt->sense, mysense, 16);
else
printk(KERN_WARNING "%s:W: Double error in get position\n", name);
}
STp->first_frame_position = ((STp->buffer)->b_data[4] << 24)
+ ((STp->buffer)->b_data[5] << 16)
+ ((STp->buffer)->b_data[6] << 8)
+ (STp->buffer)->b_data[7];
STp->last_frame_position = ((STp->buffer)->b_data[ 8] << 24)
+ ((STp->buffer)->b_data[ 9] << 16)
+ ((STp->buffer)->b_data[10] << 8)
+ (STp->buffer)->b_data[11];
STp->cur_frames = (STp->buffer)->b_data[15];
#if DEBUG
if (debugging) {
printk(OSST_DEB_MSG "%s:D: Drive Positions: host %d, tape %d%s, buffer %d\n", name,
STp->first_frame_position, STp->last_frame_position,
((STp->buffer)->b_data[0]&0x80)?" (BOP)":
((STp->buffer)->b_data[0]&0x40)?" (EOP)":"",
STp->cur_frames);
}
#endif
if (STp->cur_frames == 0 && STp->first_frame_position != STp->last_frame_position) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Correcting read position %d, %d, %d\n", name,
STp->first_frame_position, STp->last_frame_position, STp->cur_frames);
#endif
STp->first_frame_position = STp->last_frame_position;
}
}
STp->buffer->b_data = olddata; STp->buffer->buffer_size = oldsize;
return (result == 0 ? STp->first_frame_position : result);
}
/* Set the tape block */
static int osst_set_frame_position(struct osst_tape *STp, struct osst_request ** aSRpnt, int ppos, int skip)
{
unsigned char scmd[MAX_COMMAND_SIZE];
struct osst_request * SRpnt;
struct st_partstat * STps;
int result = 0;
int pp = (ppos == 3000 && !skip)? 0 : ppos;
char * name = tape_name(STp);
if (STp->ready != ST_READY) return (-EIO);
STps = &(STp->ps[STp->partition]);
if (ppos < 0 || ppos > STp->capacity) {
printk(KERN_WARNING "%s:W: Reposition request %d out of range\n", name, ppos);
pp = ppos = ppos < 0 ? 0 : (STp->capacity - 1);
result = (-EINVAL);
}
do {
#if DEBUG
if (debugging)
printk(OSST_DEB_MSG "%s:D: Setting ppos to %d.\n", name, pp);
#endif
memset (scmd, 0, MAX_COMMAND_SIZE);
scmd[0] = SEEK_10;
scmd[1] = 1;
scmd[3] = (pp >> 24);
scmd[4] = (pp >> 16);
scmd[5] = (pp >> 8);
scmd[6] = pp;
if (skip)
scmd[9] = 0x80;
SRpnt = osst_do_scsi(*aSRpnt, STp, scmd, 0, DMA_NONE, STp->long_timeout,
MAX_RETRIES, 1);
if (!SRpnt)
return (-EBUSY);
*aSRpnt = SRpnt;
if ((STp->buffer)->syscall_result != 0) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: SEEK command from %d to %d failed.\n",
name, STp->first_frame_position, pp);
#endif
result = (-EIO);
}
if (pp != ppos)
osst_wait_ready(STp, aSRpnt, 5 * 60, OSST_WAIT_POSITION_COMPLETE);
} while ((pp != ppos) && (pp = ppos));
STp->first_frame_position = STp->last_frame_position = ppos;
STps->eof = ST_NOEOF;
STps->at_sm = 0;
STps->rw = ST_IDLE;
STp->frame_in_buffer = 0;
return result;
}
static int osst_write_trailer(struct osst_tape *STp, struct osst_request ** aSRpnt, int leave_at_EOT)
{
struct st_partstat * STps = &(STp->ps[STp->partition]);
int result = 0;
if (STp->write_type != OS_WRITE_NEW_MARK) {
/* true unless the user wrote the filemark for us */
result = osst_flush_drive_buffer(STp, aSRpnt);
if (result < 0) goto out;
result = osst_write_filemark(STp, aSRpnt);
if (result < 0) goto out;
if (STps->drv_file >= 0)
STps->drv_file++ ;
STps->drv_block = 0;
}
result = osst_write_eod(STp, aSRpnt);
osst_write_header(STp, aSRpnt, leave_at_EOT);
STps->eof = ST_FM;
out:
return result;
}
/* osst versions of st functions - augmented and stripped to suit OnStream only */
/* Flush the write buffer (never need to write if variable blocksize). */
static int osst_flush_write_buffer(struct osst_tape *STp, struct osst_request ** aSRpnt)
{
int offset, transfer, blks = 0;
int result = 0;
unsigned char cmd[MAX_COMMAND_SIZE];
struct osst_request * SRpnt = *aSRpnt;
struct st_partstat * STps;
char * name = tape_name(STp);
if ((STp->buffer)->writing) {
if (SRpnt == (STp->buffer)->last_SRpnt)
#if DEBUG
{ printk(OSST_DEB_MSG
"%s:D: aSRpnt points to osst_request that write_behind_check will release -- cleared\n", name);
#endif
*aSRpnt = SRpnt = NULL;
#if DEBUG
} else if (SRpnt)
printk(OSST_DEB_MSG
"%s:D: aSRpnt does not point to osst_request that write_behind_check will release -- strange\n", name);
#endif
osst_write_behind_check(STp);
if ((STp->buffer)->syscall_result) {
#if DEBUG
if (debugging)
printk(OSST_DEB_MSG "%s:D: Async write error (flush) %x.\n",
name, (STp->buffer)->midlevel_result);
#endif
if ((STp->buffer)->midlevel_result == INT_MAX)
return (-ENOSPC);
return (-EIO);
}
}
result = 0;
if (STp->dirty == 1) {
STp->write_count++;
STps = &(STp->ps[STp->partition]);
STps->rw = ST_WRITING;
offset = STp->buffer->buffer_bytes;
blks = (offset + STp->block_size - 1) / STp->block_size;
transfer = OS_FRAME_SIZE;
if (offset < OS_DATA_SIZE)
osst_zero_buffer_tail(STp->buffer);
if (STp->poll)
if (osst_wait_frame (STp, aSRpnt, STp->first_frame_position, -50, 120))
result = osst_recover_wait_frame(STp, aSRpnt, 1);
memset(cmd, 0, MAX_COMMAND_SIZE);
cmd[0] = WRITE_6;
cmd[1] = 1;
cmd[4] = 1;
switch (STp->write_type) {
case OS_WRITE_DATA:
#if DEBUG
if (debugging)
printk(OSST_DEB_MSG "%s:D: Writing %d blocks to frame %d, lblks %d-%d\n",
name, blks, STp->frame_seq_number,
STp->logical_blk_num - blks, STp->logical_blk_num - 1);
#endif
osst_init_aux(STp, OS_FRAME_TYPE_DATA, STp->frame_seq_number++,
STp->logical_blk_num - blks, STp->block_size, blks);
break;
case OS_WRITE_EOD:
osst_init_aux(STp, OS_FRAME_TYPE_EOD, STp->frame_seq_number++,
STp->logical_blk_num, 0, 0);
break;
case OS_WRITE_NEW_MARK:
osst_init_aux(STp, OS_FRAME_TYPE_MARKER, STp->frame_seq_number++,
STp->logical_blk_num++, 0, blks=1);
break;
case OS_WRITE_HEADER:
osst_init_aux(STp, OS_FRAME_TYPE_HEADER, 0, 0, 0, blks=0);
break;
default: /* probably FILLER */
osst_init_aux(STp, OS_FRAME_TYPE_FILL, 0, 0, 0, 0);
}
#if DEBUG
if (debugging)
printk(OSST_DEB_MSG "%s:D: Flushing %d bytes, Transfering %d bytes in %d lblocks.\n",
name, offset, transfer, blks);
#endif
SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, transfer, DMA_TO_DEVICE,
STp->timeout, MAX_RETRIES, 1);
*aSRpnt = SRpnt;
if (!SRpnt)
return (-EBUSY);
if ((STp->buffer)->syscall_result != 0) {
#if DEBUG
printk(OSST_DEB_MSG
"%s:D: write sense [0]=0x%02x [2]=%02x [12]=%02x [13]=%02x\n",
name, SRpnt->sense[0], SRpnt->sense[2],
SRpnt->sense[12], SRpnt->sense[13]);
#endif
if ((SRpnt->sense[0] & 0x70) == 0x70 &&
(SRpnt->sense[2] & 0x40) && /* FIXME - SC-30 drive doesn't assert EOM bit */
(SRpnt->sense[2] & 0x0f) == NO_SENSE) {
STp->dirty = 0;
(STp->buffer)->buffer_bytes = 0;
result = (-ENOSPC);
}
else {
if (osst_write_error_recovery(STp, aSRpnt, 1)) {
printk(KERN_ERR "%s:E: Error on flush write.\n", name);
result = (-EIO);
}
}
STps->drv_block = (-1); /* FIXME - even if write recovery succeeds? */
}
else {
STp->first_frame_position++;
STp->dirty = 0;
(STp->buffer)->buffer_bytes = 0;
}
}
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Exit flush write buffer with code %d\n", name, result);
#endif
return result;
}
/* Flush the tape buffer. The tape will be positioned correctly unless
seek_next is true. */
static int osst_flush_buffer(struct osst_tape * STp, struct osst_request ** aSRpnt, int seek_next)
{
struct st_partstat * STps;
int backspace = 0, result = 0;
#if DEBUG
char * name = tape_name(STp);
#endif
/*
* If there was a bus reset, block further access
* to this device.
*/
if( STp->pos_unknown)
return (-EIO);
if (STp->ready != ST_READY)
return 0;
STps = &(STp->ps[STp->partition]);
if (STps->rw == ST_WRITING || STp->dirty) { /* Writing */
STp->write_type = OS_WRITE_DATA;
return osst_flush_write_buffer(STp, aSRpnt);
}
if (STp->block_size == 0)
return 0;
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Reached flush (read) buffer\n", name);
#endif
if (!STp->can_bsr) {
backspace = ((STp->buffer)->buffer_bytes + (STp->buffer)->read_pointer) / STp->block_size -
((STp->buffer)->read_pointer + STp->block_size - 1 ) / STp->block_size ;
(STp->buffer)->buffer_bytes = 0;
(STp->buffer)->read_pointer = 0;
STp->frame_in_buffer = 0; /* FIXME is this relevant w. OSST? */
}
if (!seek_next) {
if (STps->eof == ST_FM_HIT) {
result = cross_eof(STp, aSRpnt, 0); /* Back over the EOF hit */
if (!result)
STps->eof = ST_NOEOF;
else {
if (STps->drv_file >= 0)
STps->drv_file++;
STps->drv_block = 0;
}
}
if (!result && backspace > 0) /* TODO -- design and run a test case for this */
result = osst_seek_logical_blk(STp, aSRpnt, STp->logical_blk_num - backspace);
}
else if (STps->eof == ST_FM_HIT) {
if (STps->drv_file >= 0)
STps->drv_file++;
STps->drv_block = 0;
STps->eof = ST_NOEOF;
}
return result;
}
static int osst_write_frame(struct osst_tape * STp, struct osst_request ** aSRpnt, int synchronous)
{
unsigned char cmd[MAX_COMMAND_SIZE];
struct osst_request * SRpnt;
int blks;
#if DEBUG
char * name = tape_name(STp);
#endif
if ((!STp-> raw) && (STp->first_frame_position == 0xbae)) { /* _must_ preserve buffer! */
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Reaching config partition.\n", name);
#endif
if (osst_flush_drive_buffer(STp, aSRpnt) < 0) {
return (-EIO);
}
/* error recovery may have bumped us past the header partition */
if (osst_get_frame_position(STp, aSRpnt) < 0xbb8) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Skipping over config partition.\n", name);
#endif
osst_position_tape_and_confirm(STp, aSRpnt, 0xbb8);
}
}
if (STp->poll)
if (osst_wait_frame (STp, aSRpnt, STp->first_frame_position, -48, 120))
if (osst_recover_wait_frame(STp, aSRpnt, 1))
return (-EIO);
// osst_build_stats(STp, &SRpnt);
STp->ps[STp->partition].rw = ST_WRITING;
STp->write_type = OS_WRITE_DATA;
memset(cmd, 0, MAX_COMMAND_SIZE);
cmd[0] = WRITE_6;
cmd[1] = 1;
cmd[4] = 1; /* one frame at a time... */
blks = STp->buffer->buffer_bytes / STp->block_size;
#if DEBUG
if (debugging)
printk(OSST_DEB_MSG "%s:D: Writing %d blocks to frame %d, lblks %d-%d\n", name, blks,
STp->frame_seq_number, STp->logical_blk_num - blks, STp->logical_blk_num - 1);
#endif
osst_init_aux(STp, OS_FRAME_TYPE_DATA, STp->frame_seq_number++,
STp->logical_blk_num - blks, STp->block_size, blks);
#if DEBUG
if (!synchronous)
STp->write_pending = 1;
#endif
SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, OS_FRAME_SIZE, DMA_TO_DEVICE, STp->timeout,
MAX_RETRIES, synchronous);
if (!SRpnt)
return (-EBUSY);
*aSRpnt = SRpnt;
if (synchronous) {
if (STp->buffer->syscall_result != 0) {
#if DEBUG
if (debugging)
printk(OSST_DEB_MSG "%s:D: Error on write:\n", name);
#endif
if ((SRpnt->sense[0] & 0x70) == 0x70 &&
(SRpnt->sense[2] & 0x40)) {
if ((SRpnt->sense[2] & 0x0f) == VOLUME_OVERFLOW)
return (-ENOSPC);
}
else {
if (osst_write_error_recovery(STp, aSRpnt, 1))
return (-EIO);
}
}
else
STp->first_frame_position++;
}
STp->write_count++;
return 0;
}
/* Lock or unlock the drive door. Don't use when struct osst_request allocated. */
static int do_door_lock(struct osst_tape * STp, int do_lock)
{
int retval, cmd;
cmd = do_lock ? SCSI_IOCTL_DOORLOCK : SCSI_IOCTL_DOORUNLOCK;
#if DEBUG
printk(OSST_DEB_MSG "%s:D: %socking drive door.\n", tape_name(STp), do_lock ? "L" : "Unl");
#endif
retval = scsi_ioctl(STp->device, cmd, NULL);
if (!retval) {
STp->door_locked = do_lock ? ST_LOCKED_EXPLICIT : ST_UNLOCKED;
}
else {
STp->door_locked = ST_LOCK_FAILS;
}
return retval;
}
/* Set the internal state after reset */
static void reset_state(struct osst_tape *STp)
{
int i;
struct st_partstat *STps;
STp->pos_unknown = 0;
for (i = 0; i < ST_NBR_PARTITIONS; i++) {
STps = &(STp->ps[i]);
STps->rw = ST_IDLE;
STps->eof = ST_NOEOF;
STps->at_sm = 0;
STps->last_block_valid = 0;
STps->drv_block = -1;
STps->drv_file = -1;
}
}
/* Entry points to osst */
/* Write command */
static ssize_t osst_write(struct file * filp, const char __user * buf, size_t count, loff_t *ppos)
{
ssize_t total, retval = 0;
ssize_t i, do_count, blks, transfer;
int write_threshold;
int doing_write = 0;
const char __user * b_point;
struct osst_request * SRpnt = NULL;
struct st_modedef * STm;
struct st_partstat * STps;
struct osst_tape * STp = filp->private_data;
char * name = tape_name(STp);
if (mutex_lock_interruptible(&STp->lock))
return (-ERESTARTSYS);
/*
* If we are in the middle of error recovery, don't let anyone
* else try and use this device. Also, if error recovery fails, it
* may try and take the device offline, in which case all further
* access to the device is prohibited.
*/
if( !scsi_block_when_processing_errors(STp->device) ) {
retval = (-ENXIO);
goto out;
}
if (STp->ready != ST_READY) {
if (STp->ready == ST_NO_TAPE)
retval = (-ENOMEDIUM);
else
retval = (-EIO);
goto out;
}
STm = &(STp->modes[STp->current_mode]);
if (!STm->defined) {
retval = (-ENXIO);
goto out;
}
if (count == 0)
goto out;
/*
* If there was a bus reset, block further access
* to this device.
*/
if (STp->pos_unknown) {
retval = (-EIO);
goto out;
}
#if DEBUG
if (!STp->in_use) {
printk(OSST_DEB_MSG "%s:D: Incorrect device.\n", name);
retval = (-EIO);
goto out;
}
#endif
if (STp->write_prot) {
retval = (-EACCES);
goto out;
}
/* Write must be integral number of blocks */
if (STp->block_size != 0 && (count % STp->block_size) != 0) {
printk(KERN_ERR "%s:E: Write (%Zd bytes) not multiple of tape block size (%d%c).\n",
name, count, STp->block_size<1024?
STp->block_size:STp->block_size/1024, STp->block_size<1024?'b':'k');
retval = (-EINVAL);
goto out;
}
if (STp->first_frame_position >= STp->capacity - OSST_EOM_RESERVE) {
printk(KERN_ERR "%s:E: Write truncated at EOM early warning (frame %d).\n",
name, STp->first_frame_position);
retval = (-ENOSPC);
goto out;
}
if (STp->do_auto_lock && STp->door_locked == ST_UNLOCKED && !do_door_lock(STp, 1))
STp->door_locked = ST_LOCKED_AUTO;
STps = &(STp->ps[STp->partition]);
if (STps->rw == ST_READING) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Switching from read to write at file %d, block %d\n", name,
STps->drv_file, STps->drv_block);
#endif
retval = osst_flush_buffer(STp, &SRpnt, 0);
if (retval)
goto out;
STps->rw = ST_IDLE;
}
if (STps->rw != ST_WRITING) {
/* Are we totally rewriting this tape? */
if (!STp->header_ok ||
(STp->first_frame_position == STp->first_data_ppos && STps->drv_block < 0) ||
(STps->drv_file == 0 && STps->drv_block == 0)) {
STp->wrt_pass_cntr++;
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Allocating next write pass counter: %d\n",
name, STp->wrt_pass_cntr);
#endif
osst_reset_header(STp, &SRpnt);
STps->drv_file = STps->drv_block = 0;
}
/* Do we know where we'll be writing on the tape? */
else {
if ((STp->fast_open && osst_verify_position(STp, &SRpnt)) ||
STps->drv_file < 0 || STps->drv_block < 0) {
if (STp->first_frame_position == STp->eod_frame_ppos) { /* at EOD */
STps->drv_file = STp->filemark_cnt;
STps->drv_block = 0;
}
else {
/* We have no idea where the tape is positioned - give up */
#if DEBUG
printk(OSST_DEB_MSG
"%s:D: Cannot write at indeterminate position.\n", name);
#endif
retval = (-EIO);
goto out;
}
}
if ((STps->drv_file + STps->drv_block) > 0 && STps->drv_file < STp->filemark_cnt) {
STp->filemark_cnt = STps->drv_file;
STp->last_mark_ppos =
ntohl(STp->header_cache->dat_fm_tab.fm_tab_ent[STp->filemark_cnt-1]);
printk(KERN_WARNING
"%s:W: Overwriting file %d with old write pass counter %d\n",
name, STps->drv_file, STp->wrt_pass_cntr);
printk(KERN_WARNING
"%s:W: may lead to stale data being accepted on reading back!\n",
name);
#if DEBUG
printk(OSST_DEB_MSG
"%s:D: resetting filemark count to %d and last mark ppos,lbn to %d,%d\n",
name, STp->filemark_cnt, STp->last_mark_ppos, STp->last_mark_lbn);
#endif
}
}
STp->fast_open = 0;
}
if (!STp->header_ok) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Write cannot proceed without valid headers\n", name);
#endif
retval = (-EIO);
goto out;
}
if ((STp->buffer)->writing) {
if (SRpnt) printk(KERN_ERR "%s:A: Not supposed to have SRpnt at line %d\n", name, __LINE__);
osst_write_behind_check(STp);
if ((STp->buffer)->syscall_result) {
#if DEBUG
if (debugging)
printk(OSST_DEB_MSG "%s:D: Async write error (write) %x.\n", name,
(STp->buffer)->midlevel_result);
#endif
if ((STp->buffer)->midlevel_result == INT_MAX)
STps->eof = ST_EOM_OK;
else
STps->eof = ST_EOM_ERROR;
}
}
if (STps->eof == ST_EOM_OK) {
retval = (-ENOSPC);
goto out;
}
else if (STps->eof == ST_EOM_ERROR) {
retval = (-EIO);
goto out;
}
/* Check the buffer readability in cases where copy_user might catch
the problems after some tape movement. */
if ((copy_from_user(&i, buf, 1) != 0 ||
copy_from_user(&i, buf + count - 1, 1) != 0)) {
retval = (-EFAULT);
goto out;
}
if (!STm->do_buffer_writes) {
write_threshold = 1;
}
else
write_threshold = (STp->buffer)->buffer_blocks * STp->block_size;
if (!STm->do_async_writes)
write_threshold--;
total = count;
#if DEBUG
if (debugging)
printk(OSST_DEB_MSG "%s:D: Writing %d bytes to file %d block %d lblk %d fseq %d fppos %d\n",
name, (int) count, STps->drv_file, STps->drv_block,
STp->logical_blk_num, STp->frame_seq_number, STp->first_frame_position);
#endif
b_point = buf;
while ((STp->buffer)->buffer_bytes + count > write_threshold)
{
doing_write = 1;
do_count = (STp->buffer)->buffer_blocks * STp->block_size -
(STp->buffer)->buffer_bytes;
if (do_count > count)
do_count = count;
i = append_to_buffer(b_point, STp->buffer, do_count);
if (i) {
retval = i;
goto out;
}
blks = do_count / STp->block_size;
STp->logical_blk_num += blks; /* logical_blk_num is incremented as data is moved from user */
i = osst_write_frame(STp, &SRpnt, 1);
if (i == (-ENOSPC)) {
transfer = STp->buffer->writing; /* FIXME -- check this logic */
if (transfer <= do_count) {
filp->f_pos += do_count - transfer;
count -= do_count - transfer;
if (STps->drv_block >= 0) {
STps->drv_block += (do_count - transfer) / STp->block_size;
}
STps->eof = ST_EOM_OK;
retval = (-ENOSPC); /* EOM within current request */
#if DEBUG
if (debugging)
printk(OSST_DEB_MSG "%s:D: EOM with %d bytes unwritten.\n",
name, (int) transfer);
#endif
}
else {
STps->eof = ST_EOM_ERROR;
STps->drv_block = (-1); /* Too cautious? */
retval = (-EIO); /* EOM for old data */
#if DEBUG
if (debugging)
printk(OSST_DEB_MSG "%s:D: EOM with lost data.\n", name);
#endif
}
}
else
retval = i;
if (retval < 0) {
if (SRpnt != NULL) {
osst_release_request(SRpnt);
SRpnt = NULL;
}
STp->buffer->buffer_bytes = 0;
STp->dirty = 0;
if (count < total)
retval = total - count;
goto out;
}
filp->f_pos += do_count;
b_point += do_count;
count -= do_count;
if (STps->drv_block >= 0) {
STps->drv_block += blks;
}
STp->buffer->buffer_bytes = 0;
STp->dirty = 0;
} /* end while write threshold exceeded */
if (count != 0) {
STp->dirty = 1;
i = append_to_buffer(b_point, STp->buffer, count);
if (i) {
retval = i;
goto out;
}
blks = count / STp->block_size;
STp->logical_blk_num += blks;
if (STps->drv_block >= 0) {
STps->drv_block += blks;
}
filp->f_pos += count;
count = 0;
}
if (doing_write && (STp->buffer)->syscall_result != 0) {
retval = (STp->buffer)->syscall_result;
goto out;
}
if (STm->do_async_writes && ((STp->buffer)->buffer_bytes >= STp->write_threshold)) {
/* Schedule an asynchronous write */
(STp->buffer)->writing = ((STp->buffer)->buffer_bytes /
STp->block_size) * STp->block_size;
STp->dirty = !((STp->buffer)->writing ==
(STp->buffer)->buffer_bytes);
i = osst_write_frame(STp, &SRpnt, 0);
if (i < 0) {
retval = (-EIO);
goto out;
}
SRpnt = NULL; /* Prevent releasing this request! */
}
STps->at_sm &= (total == 0);
if (total > 0)
STps->eof = ST_NOEOF;
retval = total;
out:
if (SRpnt != NULL) osst_release_request(SRpnt);
mutex_unlock(&STp->lock);
return retval;
}
/* Read command */
static ssize_t osst_read(struct file * filp, char __user * buf, size_t count, loff_t *ppos)
{
ssize_t total, retval = 0;
ssize_t i, transfer;
int special;
struct st_modedef * STm;
struct st_partstat * STps;
struct osst_request * SRpnt = NULL;
struct osst_tape * STp = filp->private_data;
char * name = tape_name(STp);
if (mutex_lock_interruptible(&STp->lock))
return (-ERESTARTSYS);
/*
* If we are in the middle of error recovery, don't let anyone
* else try and use this device. Also, if error recovery fails, it
* may try and take the device offline, in which case all further
* access to the device is prohibited.
*/
if( !scsi_block_when_processing_errors(STp->device) ) {
retval = (-ENXIO);
goto out;
}
if (STp->ready != ST_READY) {
if (STp->ready == ST_NO_TAPE)
retval = (-ENOMEDIUM);
else
retval = (-EIO);
goto out;
}
STm = &(STp->modes[STp->current_mode]);
if (!STm->defined) {
retval = (-ENXIO);
goto out;
}
#if DEBUG
if (!STp->in_use) {
printk(OSST_DEB_MSG "%s:D: Incorrect device.\n", name);
retval = (-EIO);
goto out;
}
#endif
/* Must have initialized medium */
if (!STp->header_ok) {
retval = (-EIO);
goto out;
}
if (STp->do_auto_lock && STp->door_locked == ST_UNLOCKED && !do_door_lock(STp, 1))
STp->door_locked = ST_LOCKED_AUTO;
STps = &(STp->ps[STp->partition]);
if (STps->rw == ST_WRITING) {
retval = osst_flush_buffer(STp, &SRpnt, 0);
if (retval)
goto out;
STps->rw = ST_IDLE;
/* FIXME -- this may leave the tape without EOD and up2date headers */
}
if ((count % STp->block_size) != 0) {
printk(KERN_WARNING
"%s:W: Read (%Zd bytes) not multiple of tape block size (%d%c).\n", name, count,
STp->block_size<1024?STp->block_size:STp->block_size/1024, STp->block_size<1024?'b':'k');
}
#if DEBUG
if (debugging && STps->eof != ST_NOEOF)
printk(OSST_DEB_MSG "%s:D: EOF/EOM flag up (%d). Bytes %d\n", name,
STps->eof, (STp->buffer)->buffer_bytes);
#endif
if ((STp->buffer)->buffer_bytes == 0 &&
STps->eof >= ST_EOD_1) {
if (STps->eof < ST_EOD) {
STps->eof += 1;
retval = 0;
goto out;
}
retval = (-EIO); /* EOM or Blank Check */
goto out;
}
/* Check the buffer writability before any tape movement. Don't alter
buffer data. */
if (copy_from_user(&i, buf, 1) != 0 ||
copy_to_user (buf, &i, 1) != 0 ||
copy_from_user(&i, buf + count - 1, 1) != 0 ||
copy_to_user (buf + count - 1, &i, 1) != 0) {
retval = (-EFAULT);
goto out;
}
/* Loop until enough data in buffer or a special condition found */
for (total = 0, special = 0; total < count - STp->block_size + 1 && !special; ) {
/* Get new data if the buffer is empty */
if ((STp->buffer)->buffer_bytes == 0) {
if (STps->eof == ST_FM_HIT)
break;
special = osst_get_logical_frame(STp, &SRpnt, STp->frame_seq_number, 0);
if (special < 0) { /* No need to continue read */
STp->frame_in_buffer = 0;
retval = special;
goto out;
}
}
/* Move the data from driver buffer to user buffer */
if ((STp->buffer)->buffer_bytes > 0) {
#if DEBUG
if (debugging && STps->eof != ST_NOEOF)
printk(OSST_DEB_MSG "%s:D: EOF up (%d). Left %d, needed %d.\n", name,
STps->eof, (STp->buffer)->buffer_bytes, (int) (count - total));
#endif
/* force multiple of block size, note block_size may have been adjusted */
transfer = (((STp->buffer)->buffer_bytes < count - total ?
(STp->buffer)->buffer_bytes : count - total)/
STp->block_size) * STp->block_size;
if (transfer == 0) {
printk(KERN_WARNING
"%s:W: Nothing can be transfered, requested %Zd, tape block size (%d%c).\n",
name, count, STp->block_size < 1024?
STp->block_size:STp->block_size/1024,
STp->block_size<1024?'b':'k');
break;
}
i = from_buffer(STp->buffer, buf, transfer);
if (i) {
retval = i;
goto out;
}
STp->logical_blk_num += transfer / STp->block_size;
STps->drv_block += transfer / STp->block_size;
filp->f_pos += transfer;
buf += transfer;
total += transfer;
}
if ((STp->buffer)->buffer_bytes == 0) {
#if DEBUG
if (debugging)
printk(OSST_DEB_MSG "%s:D: Finished with frame %d\n",
name, STp->frame_seq_number);
#endif
STp->frame_in_buffer = 0;
STp->frame_seq_number++; /* frame to look for next time */
}
} /* for (total = 0, special = 0; total < count && !special; ) */
/* Change the eof state if no data from tape or buffer */
if (total == 0) {
if (STps->eof == ST_FM_HIT) {
STps->eof = (STp->first_frame_position >= STp->eod_frame_ppos)?ST_EOD_2:ST_FM;
STps->drv_block = 0;
if (STps->drv_file >= 0)
STps->drv_file++;
}
else if (STps->eof == ST_EOD_1) {
STps->eof = ST_EOD_2;
if (STps->drv_block > 0 && STps->drv_file >= 0)
STps->drv_file++;
STps->drv_block = 0;
}
else if (STps->eof == ST_EOD_2)
STps->eof = ST_EOD;
}
else if (STps->eof == ST_FM)
STps->eof = ST_NOEOF;
retval = total;
out:
if (SRpnt != NULL) osst_release_request(SRpnt);
mutex_unlock(&STp->lock);
return retval;
}
/* Set the driver options */
static void osst_log_options(struct osst_tape *STp, struct st_modedef *STm, char *name)
{
printk(KERN_INFO
"%s:I: Mode %d options: buffer writes: %d, async writes: %d, read ahead: %d\n",
name, STp->current_mode, STm->do_buffer_writes, STm->do_async_writes,
STm->do_read_ahead);
printk(KERN_INFO
"%s:I: can bsr: %d, two FMs: %d, fast mteom: %d, auto lock: %d,\n",
name, STp->can_bsr, STp->two_fm, STp->fast_mteom, STp->do_auto_lock);
printk(KERN_INFO
"%s:I: defs for wr: %d, no block limits: %d, partitions: %d, s2 log: %d\n",
name, STm->defaults_for_writes, STp->omit_blklims, STp->can_partitions,
STp->scsi2_logical);
printk(KERN_INFO
"%s:I: sysv: %d\n", name, STm->sysv);
#if DEBUG
printk(KERN_INFO
"%s:D: debugging: %d\n",
name, debugging);
#endif
}
static int osst_set_options(struct osst_tape *STp, long options)
{
int value;
long code;
struct st_modedef * STm;
char * name = tape_name(STp);
STm = &(STp->modes[STp->current_mode]);
if (!STm->defined) {
memcpy(STm, &(STp->modes[0]), sizeof(*STm));
modes_defined = 1;
#if DEBUG
if (debugging)
printk(OSST_DEB_MSG "%s:D: Initialized mode %d definition from mode 0\n",
name, STp->current_mode);
#endif
}
code = options & MT_ST_OPTIONS;
if (code == MT_ST_BOOLEANS) {
STm->do_buffer_writes = (options & MT_ST_BUFFER_WRITES) != 0;
STm->do_async_writes = (options & MT_ST_ASYNC_WRITES) != 0;
STm->defaults_for_writes = (options & MT_ST_DEF_WRITES) != 0;
STm->do_read_ahead = (options & MT_ST_READ_AHEAD) != 0;
STp->two_fm = (options & MT_ST_TWO_FM) != 0;
STp->fast_mteom = (options & MT_ST_FAST_MTEOM) != 0;
STp->do_auto_lock = (options & MT_ST_AUTO_LOCK) != 0;
STp->can_bsr = (options & MT_ST_CAN_BSR) != 0;
STp->omit_blklims = (options & MT_ST_NO_BLKLIMS) != 0;
if ((STp->device)->scsi_level >= SCSI_2)
STp->can_partitions = (options & MT_ST_CAN_PARTITIONS) != 0;
STp->scsi2_logical = (options & MT_ST_SCSI2LOGICAL) != 0;
STm->sysv = (options & MT_ST_SYSV) != 0;
#if DEBUG
debugging = (options & MT_ST_DEBUGGING) != 0;
#endif
osst_log_options(STp, STm, name);
}
else if (code == MT_ST_SETBOOLEANS || code == MT_ST_CLEARBOOLEANS) {
value = (code == MT_ST_SETBOOLEANS);
if ((options & MT_ST_BUFFER_WRITES) != 0)
STm->do_buffer_writes = value;
if ((options & MT_ST_ASYNC_WRITES) != 0)
STm->do_async_writes = value;
if ((options & MT_ST_DEF_WRITES) != 0)
STm->defaults_for_writes = value;
if ((options & MT_ST_READ_AHEAD) != 0)
STm->do_read_ahead = value;
if ((options & MT_ST_TWO_FM) != 0)
STp->two_fm = value;
if ((options & MT_ST_FAST_MTEOM) != 0)
STp->fast_mteom = value;
if ((options & MT_ST_AUTO_LOCK) != 0)
STp->do_auto_lock = value;
if ((options & MT_ST_CAN_BSR) != 0)
STp->can_bsr = value;
if ((options & MT_ST_NO_BLKLIMS) != 0)
STp->omit_blklims = value;
if ((STp->device)->scsi_level >= SCSI_2 &&
(options & MT_ST_CAN_PARTITIONS) != 0)
STp->can_partitions = value;
if ((options & MT_ST_SCSI2LOGICAL) != 0)
STp->scsi2_logical = value;
if ((options & MT_ST_SYSV) != 0)
STm->sysv = value;
#if DEBUG
if ((options & MT_ST_DEBUGGING) != 0)
debugging = value;
#endif
osst_log_options(STp, STm, name);
}
else if (code == MT_ST_WRITE_THRESHOLD) {
value = (options & ~MT_ST_OPTIONS) * ST_KILOBYTE;
if (value < 1 || value > osst_buffer_size) {
printk(KERN_WARNING "%s:W: Write threshold %d too small or too large.\n",
name, value);
return (-EIO);
}
STp->write_threshold = value;
printk(KERN_INFO "%s:I: Write threshold set to %d bytes.\n",
name, value);
}
else if (code == MT_ST_DEF_BLKSIZE) {
value = (options & ~MT_ST_OPTIONS);
if (value == ~MT_ST_OPTIONS) {
STm->default_blksize = (-1);
printk(KERN_INFO "%s:I: Default block size disabled.\n", name);
}
else {
if (value < 512 || value > OS_DATA_SIZE || OS_DATA_SIZE % value) {
printk(KERN_WARNING "%s:W: Default block size cannot be set to %d.\n",
name, value);
return (-EINVAL);
}
STm->default_blksize = value;
printk(KERN_INFO "%s:I: Default block size set to %d bytes.\n",
name, STm->default_blksize);
}
}
else if (code == MT_ST_TIMEOUTS) {
value = (options & ~MT_ST_OPTIONS);
if ((value & MT_ST_SET_LONG_TIMEOUT) != 0) {
STp->long_timeout = (value & ~MT_ST_SET_LONG_TIMEOUT) * HZ;
printk(KERN_INFO "%s:I: Long timeout set to %d seconds.\n", name,
(value & ~MT_ST_SET_LONG_TIMEOUT));
}
else {
STp->timeout = value * HZ;
printk(KERN_INFO "%s:I: Normal timeout set to %d seconds.\n", name, value);
}
}
else if (code == MT_ST_DEF_OPTIONS) {
code = (options & ~MT_ST_CLEAR_DEFAULT);
value = (options & MT_ST_CLEAR_DEFAULT);
if (code == MT_ST_DEF_DENSITY) {
if (value == MT_ST_CLEAR_DEFAULT) {
STm->default_density = (-1);
printk(KERN_INFO "%s:I: Density default disabled.\n", name);
}
else {
STm->default_density = value & 0xff;
printk(KERN_INFO "%s:I: Density default set to %x\n",
name, STm->default_density);
}
}
else if (code == MT_ST_DEF_DRVBUFFER) {
if (value == MT_ST_CLEAR_DEFAULT) {
STp->default_drvbuffer = 0xff;
printk(KERN_INFO "%s:I: Drive buffer default disabled.\n", name);
}
else {
STp->default_drvbuffer = value & 7;
printk(KERN_INFO "%s:I: Drive buffer default set to %x\n",
name, STp->default_drvbuffer);
}
}
else if (code == MT_ST_DEF_COMPRESSION) {
if (value == MT_ST_CLEAR_DEFAULT) {
STm->default_compression = ST_DONT_TOUCH;
printk(KERN_INFO "%s:I: Compression default disabled.\n", name);
}
else {
STm->default_compression = (value & 1 ? ST_YES : ST_NO);
printk(KERN_INFO "%s:I: Compression default set to %x\n",
name, (value & 1));
}
}
}
else
return (-EIO);
return 0;
}
/* Internal ioctl function */
static int osst_int_ioctl(struct osst_tape * STp, struct osst_request ** aSRpnt,
unsigned int cmd_in, unsigned long arg)
{
int timeout;
long ltmp;
int i, ioctl_result;
int chg_eof = 1;
unsigned char cmd[MAX_COMMAND_SIZE];
struct osst_request * SRpnt = * aSRpnt;
struct st_partstat * STps;
int fileno, blkno, at_sm, frame_seq_numbr, logical_blk_num;
int datalen = 0, direction = DMA_NONE;
char * name = tape_name(STp);
if (STp->ready != ST_READY && cmd_in != MTLOAD) {
if (STp->ready == ST_NO_TAPE)
return (-ENOMEDIUM);
else
return (-EIO);
}
timeout = STp->long_timeout;
STps = &(STp->ps[STp->partition]);
fileno = STps->drv_file;
blkno = STps->drv_block;
at_sm = STps->at_sm;
frame_seq_numbr = STp->frame_seq_number;
logical_blk_num = STp->logical_blk_num;
memset(cmd, 0, MAX_COMMAND_SIZE);
switch (cmd_in) {
case MTFSFM:
chg_eof = 0; /* Changed from the FSF after this */
case MTFSF:
if (STp->raw)
return (-EIO);
if (STp->linux_media)
ioctl_result = osst_space_over_filemarks_forward_fast(STp, &SRpnt, cmd_in, arg);
else
ioctl_result = osst_space_over_filemarks_forward_slow(STp, &SRpnt, cmd_in, arg);
if (fileno >= 0)
fileno += arg;
blkno = 0;
at_sm &= (arg == 0);
goto os_bypass;
case MTBSF:
chg_eof = 0; /* Changed from the FSF after this */
case MTBSFM:
if (STp->raw)
return (-EIO);
ioctl_result = osst_space_over_filemarks_backward(STp, &SRpnt, cmd_in, arg);
if (fileno >= 0)
fileno -= arg;
blkno = (-1); /* We can't know the block number */
at_sm &= (arg == 0);
goto os_bypass;
case MTFSR:
case MTBSR:
#if DEBUG
if (debugging)
printk(OSST_DEB_MSG "%s:D: Skipping %lu blocks %s from logical block %d\n",
name, arg, cmd_in==MTFSR?"forward":"backward", logical_blk_num);
#endif
if (cmd_in == MTFSR) {
logical_blk_num += arg;
if (blkno >= 0) blkno += arg;
}
else {
logical_blk_num -= arg;
if (blkno >= 0) blkno -= arg;
}
ioctl_result = osst_seek_logical_blk(STp, &SRpnt, logical_blk_num);
fileno = STps->drv_file;
blkno = STps->drv_block;
at_sm &= (arg == 0);
goto os_bypass;
case MTFSS:
cmd[0] = SPACE;
cmd[1] = 0x04; /* Space Setmarks */ /* FIXME -- OS can't do this? */
cmd[2] = (arg >> 16);
cmd[3] = (arg >> 8);
cmd[4] = arg;
#if DEBUG
if (debugging)
printk(OSST_DEB_MSG "%s:D: Spacing tape forward %d setmarks.\n", name,
cmd[2] * 65536 + cmd[3] * 256 + cmd[4]);
#endif
if (arg != 0) {
blkno = fileno = (-1);
at_sm = 1;
}
break;
case MTBSS:
cmd[0] = SPACE;
cmd[1] = 0x04; /* Space Setmarks */ /* FIXME -- OS can't do this? */
ltmp = (-arg);
cmd[2] = (ltmp >> 16);
cmd[3] = (ltmp >> 8);
cmd[4] = ltmp;
#if DEBUG
if (debugging) {
if (cmd[2] & 0x80)
ltmp = 0xff000000;
ltmp = ltmp | (cmd[2] << 16) | (cmd[3] << 8) | cmd[4];
printk(OSST_DEB_MSG "%s:D: Spacing tape backward %ld setmarks.\n",
name, (-ltmp));
}
#endif
if (arg != 0) {
blkno = fileno = (-1);
at_sm = 1;
}
break;
case MTWEOF:
if ((STps->rw == ST_WRITING || STp->dirty) && !STp->pos_unknown) {
STp->write_type = OS_WRITE_DATA;
ioctl_result = osst_flush_write_buffer(STp, &SRpnt);
} else
ioctl_result = 0;
#if DEBUG
if (debugging)
printk(OSST_DEB_MSG "%s:D: Writing %ld filemark(s).\n", name, arg);
#endif
for (i=0; i<arg; i++)
ioctl_result |= osst_write_filemark(STp, &SRpnt);
if (fileno >= 0) fileno += arg;
if (blkno >= 0) blkno = 0;
goto os_bypass;
case MTWSM:
if (STp->write_prot)
return (-EACCES);
if (!STp->raw)
return 0;
cmd[0] = WRITE_FILEMARKS; /* FIXME -- need OS version */
if (cmd_in == MTWSM)
cmd[1] = 2;
cmd[2] = (arg >> 16);
cmd[3] = (arg >> 8);
cmd[4] = arg;
timeout = STp->timeout;
#if DEBUG
if (debugging)
printk(OSST_DEB_MSG "%s:D: Writing %d setmark(s).\n", name,
cmd[2] * 65536 + cmd[3] * 256 + cmd[4]);
#endif
if (fileno >= 0)
fileno += arg;
blkno = 0;
at_sm = (cmd_in == MTWSM);
break;
case MTOFFL:
case MTLOAD:
case MTUNLOAD:
case MTRETEN:
cmd[0] = START_STOP;
cmd[1] = 1; /* Don't wait for completion */
if (cmd_in == MTLOAD) {
if (STp->ready == ST_NO_TAPE)
cmd[4] = 4; /* open tray */
else
cmd[4] = 1; /* load */
}
if (cmd_in == MTRETEN)
cmd[4] = 3; /* retension then mount */
if (cmd_in == MTOFFL)
cmd[4] = 4; /* rewind then eject */
timeout = STp->timeout;
#if DEBUG
if (debugging) {
switch (cmd_in) {
case MTUNLOAD:
printk(OSST_DEB_MSG "%s:D: Unloading tape.\n", name);
break;
case MTLOAD:
printk(OSST_DEB_MSG "%s:D: Loading tape.\n", name);
break;
case MTRETEN:
printk(OSST_DEB_MSG "%s:D: Retensioning tape.\n", name);
break;
case MTOFFL:
printk(OSST_DEB_MSG "%s:D: Ejecting tape.\n", name);
break;
}
}
#endif
fileno = blkno = at_sm = frame_seq_numbr = logical_blk_num = 0 ;
break;
case MTNOP:
#if DEBUG
if (debugging)
printk(OSST_DEB_MSG "%s:D: No-op on tape.\n", name);
#endif
return 0; /* Should do something ? */
break;
case MTEOM:
#if DEBUG
if (debugging)
printk(OSST_DEB_MSG "%s:D: Spacing to end of recorded medium.\n", name);
#endif
if ((osst_position_tape_and_confirm(STp, &SRpnt, STp->eod_frame_ppos) < 0) ||
(osst_get_logical_frame(STp, &SRpnt, -1, 0) < 0)) {
ioctl_result = -EIO;
goto os_bypass;
}
if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_EOD) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: No EOD frame found where expected.\n", name);
#endif
ioctl_result = -EIO;
goto os_bypass;
}
ioctl_result = osst_set_frame_position(STp, &SRpnt, STp->eod_frame_ppos, 0);
fileno = STp->filemark_cnt;
blkno = at_sm = 0;
goto os_bypass;
case MTERASE:
if (STp->write_prot)
return (-EACCES);
ioctl_result = osst_reset_header(STp, &SRpnt);
i = osst_write_eod(STp, &SRpnt);
if (i < ioctl_result) ioctl_result = i;
i = osst_position_tape_and_confirm(STp, &SRpnt, STp->eod_frame_ppos);
if (i < ioctl_result) ioctl_result = i;
fileno = blkno = at_sm = 0 ;
goto os_bypass;
case MTREW:
cmd[0] = REZERO_UNIT; /* rewind */
cmd[1] = 1;
#if DEBUG
if (debugging)
printk(OSST_DEB_MSG "%s:D: Rewinding tape, Immed=%d.\n", name, cmd[1]);
#endif
fileno = blkno = at_sm = frame_seq_numbr = logical_blk_num = 0 ;
break;
case MTSETBLK: /* Set block length */
if ((STps->drv_block == 0 ) &&
!STp->dirty &&
((STp->buffer)->buffer_bytes == 0) &&
((arg & MT_ST_BLKSIZE_MASK) >= 512 ) &&
((arg & MT_ST_BLKSIZE_MASK) <= OS_DATA_SIZE) &&
!(OS_DATA_SIZE % (arg & MT_ST_BLKSIZE_MASK)) ) {
/*
* Only allowed to change the block size if you opened the
* device at the beginning of a file before writing anything.
* Note, that when reading, changing block_size is futile,
* as the size used when writing overrides it.
*/
STp->block_size = (arg & MT_ST_BLKSIZE_MASK);
printk(KERN_INFO "%s:I: Block size set to %d bytes.\n",
name, STp->block_size);
return 0;
}
case MTSETDENSITY: /* Set tape density */
case MTSETDRVBUFFER: /* Set drive buffering */
case SET_DENS_AND_BLK: /* Set density and block size */
chg_eof = 0;
if (STp->dirty || (STp->buffer)->buffer_bytes != 0)
return (-EIO); /* Not allowed if data in buffer */
if ((cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK) &&
(arg & MT_ST_BLKSIZE_MASK) != 0 &&
(arg & MT_ST_BLKSIZE_MASK) != STp->block_size ) {
printk(KERN_WARNING "%s:W: Illegal to set block size to %d%s.\n",
name, (int)(arg & MT_ST_BLKSIZE_MASK),
(OS_DATA_SIZE % (arg & MT_ST_BLKSIZE_MASK))?"":" now");
return (-EINVAL);
}
return 0; /* FIXME silently ignore if block size didn't change */
default:
return (-ENOSYS);
}
SRpnt = osst_do_scsi(SRpnt, STp, cmd, datalen, direction, timeout, MAX_RETRIES, 1);
ioctl_result = (STp->buffer)->syscall_result;
if (!SRpnt) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Couldn't exec scsi cmd for IOCTL\n", name);
#endif
return ioctl_result;
}
if (!ioctl_result) { /* SCSI command successful */
STp->frame_seq_number = frame_seq_numbr;
STp->logical_blk_num = logical_blk_num;
}
os_bypass:
#if DEBUG
if (debugging)
printk(OSST_DEB_MSG "%s:D: IOCTL (%d) Result=%d\n", name, cmd_in, ioctl_result);
#endif
if (!ioctl_result) { /* success */
if (cmd_in == MTFSFM) {
fileno--;
blkno--;
}
if (cmd_in == MTBSFM) {
fileno++;
blkno++;
}
STps->drv_block = blkno;
STps->drv_file = fileno;
STps->at_sm = at_sm;
if (cmd_in == MTEOM)
STps->eof = ST_EOD;
else if ((cmd_in == MTFSFM || cmd_in == MTBSF) && STps->eof == ST_FM_HIT) {
ioctl_result = osst_seek_logical_blk(STp, &SRpnt, STp->logical_blk_num-1);
STps->drv_block++;
STp->logical_blk_num++;
STp->frame_seq_number++;
STp->frame_in_buffer = 0;
STp->buffer->read_pointer = 0;
}
else if (cmd_in == MTFSF)
STps->eof = (STp->first_frame_position >= STp->eod_frame_ppos)?ST_EOD:ST_FM;
else if (chg_eof)
STps->eof = ST_NOEOF;
if (cmd_in == MTOFFL || cmd_in == MTUNLOAD)
STp->rew_at_close = 0;
else if (cmd_in == MTLOAD) {
for (i=0; i < ST_NBR_PARTITIONS; i++) {
STp->ps[i].rw = ST_IDLE;
STp->ps[i].last_block_valid = 0;/* FIXME - where else is this field maintained? */
}
STp->partition = 0;
}
if (cmd_in == MTREW) {
ioctl_result = osst_position_tape_and_confirm(STp, &SRpnt, STp->first_data_ppos);
if (ioctl_result > 0)
ioctl_result = 0;
}
} else if (cmd_in == MTBSF || cmd_in == MTBSFM ) {
if (osst_position_tape_and_confirm(STp, &SRpnt, STp->first_data_ppos) < 0)
STps->drv_file = STps->drv_block = -1;
else
STps->drv_file = STps->drv_block = 0;
STps->eof = ST_NOEOF;
} else if (cmd_in == MTFSF || cmd_in == MTFSFM) {
if (osst_position_tape_and_confirm(STp, &SRpnt, STp->eod_frame_ppos) < 0)
STps->drv_file = STps->drv_block = -1;
else {
STps->drv_file = STp->filemark_cnt;
STps->drv_block = 0;
}
STps->eof = ST_EOD;
} else if (cmd_in == MTBSR || cmd_in == MTFSR || cmd_in == MTWEOF || cmd_in == MTEOM) {
STps->drv_file = STps->drv_block = (-1);
STps->eof = ST_NOEOF;
STp->header_ok = 0;
} else if (cmd_in == MTERASE) {
STp->header_ok = 0;
} else if (SRpnt) { /* SCSI command was not completely successful. */
if (SRpnt->sense[2] & 0x40) {
STps->eof = ST_EOM_OK;
STps->drv_block = 0;
}
if (chg_eof)
STps->eof = ST_NOEOF;
if ((SRpnt->sense[2] & 0x0f) == BLANK_CHECK)
STps->eof = ST_EOD;
if (cmd_in == MTLOAD && osst_wait_for_medium(STp, &SRpnt, 60))
ioctl_result = osst_wait_ready(STp, &SRpnt, 5 * 60, OSST_WAIT_POSITION_COMPLETE);
}
*aSRpnt = SRpnt;
return ioctl_result;
}
/* Open the device */
static int __os_scsi_tape_open(struct inode * inode, struct file * filp)
{
unsigned short flags;
int i, b_size, new_session = 0, retval = 0;
unsigned char cmd[MAX_COMMAND_SIZE];
struct osst_request * SRpnt = NULL;
struct osst_tape * STp;
struct st_modedef * STm;
struct st_partstat * STps;
char * name;
int dev = TAPE_NR(inode);
int mode = TAPE_MODE(inode);
/*
* We really want to do nonseekable_open(inode, filp); here, but some
* versions of tar incorrectly call lseek on tapes and bail out if that
* fails. So we disallow pread() and pwrite(), but permit lseeks.
*/
filp->f_mode &= ~(FMODE_PREAD | FMODE_PWRITE);
write_lock(&os_scsi_tapes_lock);
if (dev >= osst_max_dev || os_scsi_tapes == NULL ||
(STp = os_scsi_tapes[dev]) == NULL || !STp->device) {
write_unlock(&os_scsi_tapes_lock);
return (-ENXIO);
}
name = tape_name(STp);
if (STp->in_use) {
write_unlock(&os_scsi_tapes_lock);
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Device already in use.\n", name);
#endif
return (-EBUSY);
}
if (scsi_device_get(STp->device)) {
write_unlock(&os_scsi_tapes_lock);
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Failed scsi_device_get.\n", name);
#endif
return (-ENXIO);
}
filp->private_data = STp;
STp->in_use = 1;
write_unlock(&os_scsi_tapes_lock);
STp->rew_at_close = TAPE_REWIND(inode);
if( !scsi_block_when_processing_errors(STp->device) ) {
return -ENXIO;
}
if (mode != STp->current_mode) {
#if DEBUG
if (debugging)
printk(OSST_DEB_MSG "%s:D: Mode change from %d to %d.\n",
name, STp->current_mode, mode);
#endif
new_session = 1;
STp->current_mode = mode;
}
STm = &(STp->modes[STp->current_mode]);
flags = filp->f_flags;
STp->write_prot = ((flags & O_ACCMODE) == O_RDONLY);
STp->raw = TAPE_IS_RAW(inode);
if (STp->raw)
STp->header_ok = 0;
/* Allocate data segments for this device's tape buffer */
if (!enlarge_buffer(STp->buffer, STp->restr_dma)) {
printk(KERN_ERR "%s:E: Unable to allocate memory segments for tape buffer.\n", name);
retval = (-EOVERFLOW);
goto err_out;
}
if (STp->buffer->buffer_size >= OS_FRAME_SIZE) {
for (i = 0, b_size = 0;
(i < STp->buffer->sg_segs) && ((b_size + STp->buffer->sg[i].length) <= OS_DATA_SIZE);
b_size += STp->buffer->sg[i++].length);
STp->buffer->aux = (os_aux_t *) (page_address(sg_page(&STp->buffer->sg[i])) + OS_DATA_SIZE - b_size);
#if DEBUG
printk(OSST_DEB_MSG "%s:D: b_data points to %p in segment 0 at %p\n", name,
STp->buffer->b_data, page_address(STp->buffer->sg[0].page));
printk(OSST_DEB_MSG "%s:D: AUX points to %p in segment %d at %p\n", name,
STp->buffer->aux, i, page_address(STp->buffer->sg[i].page));
#endif
} else {
STp->buffer->aux = NULL; /* this had better never happen! */
printk(KERN_NOTICE "%s:A: Framesize %d too large for buffer.\n", name, OS_FRAME_SIZE);
retval = (-EIO);
goto err_out;
}
STp->buffer->writing = 0;
STp->buffer->syscall_result = 0;
STp->dirty = 0;
for (i=0; i < ST_NBR_PARTITIONS; i++) {
STps = &(STp->ps[i]);
STps->rw = ST_IDLE;
}
STp->ready = ST_READY;
#if DEBUG
STp->nbr_waits = STp->nbr_finished = 0;
#endif
memset (cmd, 0, MAX_COMMAND_SIZE);
cmd[0] = TEST_UNIT_READY;
SRpnt = osst_do_scsi(NULL, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1);
if (!SRpnt) {
retval = (STp->buffer)->syscall_result; /* FIXME - valid? */
goto err_out;
}
if ((SRpnt->sense[0] & 0x70) == 0x70 &&
(SRpnt->sense[2] & 0x0f) == NOT_READY &&
SRpnt->sense[12] == 4 ) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Unit not ready, cause %x\n", name, SRpnt->sense[13]);
#endif
if (filp->f_flags & O_NONBLOCK) {
retval = -EAGAIN;
goto err_out;
}
if (SRpnt->sense[13] == 2) { /* initialize command required (LOAD) */
memset (cmd, 0, MAX_COMMAND_SIZE);
cmd[0] = START_STOP;
cmd[1] = 1;
cmd[4] = 1;
SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE,
STp->timeout, MAX_RETRIES, 1);
}
osst_wait_ready(STp, &SRpnt, (SRpnt->sense[13]==1?15:3) * 60, 0);
}
if ((SRpnt->sense[0] & 0x70) == 0x70 &&
(SRpnt->sense[2] & 0x0f) == UNIT_ATTENTION) { /* New media? */
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Unit wants attention\n", name);
#endif
STp->header_ok = 0;
for (i=0; i < 10; i++) {
memset (cmd, 0, MAX_COMMAND_SIZE);
cmd[0] = TEST_UNIT_READY;
SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE,
STp->timeout, MAX_RETRIES, 1);
if ((SRpnt->sense[0] & 0x70) != 0x70 ||
(SRpnt->sense[2] & 0x0f) != UNIT_ATTENTION)
break;
}
STp->pos_unknown = 0;
STp->partition = STp->new_partition = 0;
if (STp->can_partitions)
STp->nbr_partitions = 1; /* This guess will be updated later if necessary */
for (i=0; i < ST_NBR_PARTITIONS; i++) {
STps = &(STp->ps[i]);
STps->rw = ST_IDLE; /* FIXME - seems to be redundant... */
STps->eof = ST_NOEOF;
STps->at_sm = 0;
STps->last_block_valid = 0;
STps->drv_block = 0;
STps->drv_file = 0 ;
}
new_session = 1;
STp->recover_count = 0;
STp->abort_count = 0;
}
/*
* if we have valid headers from before, and the drive/tape seem untouched,
* open without reconfiguring and re-reading the headers
*/
if (!STp->buffer->syscall_result && STp->header_ok &&
!SRpnt->result && SRpnt->sense[0] == 0) {
memset(cmd, 0, MAX_COMMAND_SIZE);
cmd[0] = MODE_SENSE;
cmd[1] = 8;
cmd[2] = VENDOR_IDENT_PAGE;
cmd[4] = VENDOR_IDENT_PAGE_LENGTH + MODE_HEADER_LENGTH;
SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_FROM_DEVICE, STp->timeout, 0, 1);
if (STp->buffer->syscall_result ||
STp->buffer->b_data[MODE_HEADER_LENGTH + 2] != 'L' ||
STp->buffer->b_data[MODE_HEADER_LENGTH + 3] != 'I' ||
STp->buffer->b_data[MODE_HEADER_LENGTH + 4] != 'N' ||
STp->buffer->b_data[MODE_HEADER_LENGTH + 5] != '4' ) {
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Signature was changed to %c%c%c%c\n", name,
STp->buffer->b_data[MODE_HEADER_LENGTH + 2],
STp->buffer->b_data[MODE_HEADER_LENGTH + 3],
STp->buffer->b_data[MODE_HEADER_LENGTH + 4],
STp->buffer->b_data[MODE_HEADER_LENGTH + 5]);
#endif
STp->header_ok = 0;
}
i = STp->first_frame_position;
if (STp->header_ok && i == osst_get_frame_position(STp, &SRpnt)) {
if (STp->door_locked == ST_UNLOCKED) {
if (do_door_lock(STp, 1))
printk(KERN_INFO "%s:I: Can't lock drive door\n", name);
else
STp->door_locked = ST_LOCKED_AUTO;
}
if (!STp->frame_in_buffer) {
STp->block_size = (STm->default_blksize > 0) ?
STm->default_blksize : OS_DATA_SIZE;
STp->buffer->buffer_bytes = STp->buffer->read_pointer = 0;
}
STp->buffer->buffer_blocks = OS_DATA_SIZE / STp->block_size;
STp->fast_open = 1;
osst_release_request(SRpnt);
return 0;
}
#if DEBUG
if (i != STp->first_frame_position)
printk(OSST_DEB_MSG "%s:D: Tape position changed from %d to %d\n",
name, i, STp->first_frame_position);
#endif
STp->header_ok = 0;
}
STp->fast_open = 0;
if ((STp->buffer)->syscall_result != 0 && /* in all error conditions except no medium */
(SRpnt->sense[2] != 2 || SRpnt->sense[12] != 0x3A) ) {
memset(cmd, 0, MAX_COMMAND_SIZE);
cmd[0] = MODE_SELECT;
cmd[1] = 0x10;
cmd[4] = 4 + MODE_HEADER_LENGTH;
(STp->buffer)->b_data[0] = cmd[4] - 1;
(STp->buffer)->b_data[1] = 0; /* Medium Type - ignoring */
(STp->buffer)->b_data[2] = 0; /* Reserved */
(STp->buffer)->b_data[3] = 0; /* Block Descriptor Length */
(STp->buffer)->b_data[MODE_HEADER_LENGTH + 0] = 0x3f;
(STp->buffer)->b_data[MODE_HEADER_LENGTH + 1] = 1;
(STp->buffer)->b_data[MODE_HEADER_LENGTH + 2] = 2;
(STp->buffer)->b_data[MODE_HEADER_LENGTH + 3] = 3;
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Applying soft reset\n", name);
#endif
SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_TO_DEVICE, STp->timeout, 0, 1);
STp->header_ok = 0;
for (i=0; i < 10; i++) {
memset (cmd, 0, MAX_COMMAND_SIZE);
cmd[0] = TEST_UNIT_READY;
SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE,
STp->timeout, MAX_RETRIES, 1);
if ((SRpnt->sense[0] & 0x70) != 0x70 ||
(SRpnt->sense[2] & 0x0f) == NOT_READY)
break;
if ((SRpnt->sense[2] & 0x0f) == UNIT_ATTENTION) {
STp->pos_unknown = 0;
STp->partition = STp->new_partition = 0;
if (STp->can_partitions)
STp->nbr_partitions = 1; /* This guess will be updated later if necessary */
for (i=0; i < ST_NBR_PARTITIONS; i++) {
STps = &(STp->ps[i]);
STps->rw = ST_IDLE;
STps->eof = ST_NOEOF;
STps->at_sm = 0;
STps->last_block_valid = 0;
STps->drv_block = 0;
STps->drv_file = 0 ;
}
new_session = 1;
}
}
}
if (osst_wait_ready(STp, &SRpnt, 15 * 60, 0)) /* FIXME - not allowed with NOBLOCK */
printk(KERN_INFO "%s:I: Device did not become Ready in open\n", name);
if ((STp->buffer)->syscall_result != 0) {
if ((STp->device)->scsi_level >= SCSI_2 &&
(SRpnt->sense[0] & 0x70) == 0x70 &&
(SRpnt->sense[2] & 0x0f) == NOT_READY &&
SRpnt->sense[12] == 0x3a) { /* Check ASC */
STp->ready = ST_NO_TAPE;
} else
STp->ready = ST_NOT_READY;
osst_release_request(SRpnt);
SRpnt = NULL;
STp->density = 0; /* Clear the erroneous "residue" */
STp->write_prot = 0;
STp->block_size = 0;
STp->ps[0].drv_file = STp->ps[0].drv_block = (-1);
STp->partition = STp->new_partition = 0;
STp->door_locked = ST_UNLOCKED;
return 0;
}
osst_configure_onstream(STp, &SRpnt);
STp->block_size = STp->raw ? OS_FRAME_SIZE : (
(STm->default_blksize > 0) ? STm->default_blksize : OS_DATA_SIZE);
STp->buffer->buffer_blocks = STp->raw ? 1 : OS_DATA_SIZE / STp->block_size;
STp->buffer->buffer_bytes =
STp->buffer->read_pointer =
STp->frame_in_buffer = 0;
#if DEBUG
if (debugging)
printk(OSST_DEB_MSG "%s:D: Block size: %d, frame size: %d, buffer size: %d (%d blocks).\n",
name, STp->block_size, OS_FRAME_SIZE, (STp->buffer)->buffer_size,
(STp->buffer)->buffer_blocks);
#endif
if (STp->drv_write_prot) {
STp->write_prot = 1;
#if DEBUG
if (debugging)
printk(OSST_DEB_MSG "%s:D: Write protected\n", name);
#endif
if ((flags & O_ACCMODE) == O_WRONLY || (flags & O_ACCMODE) == O_RDWR) {
retval = (-EROFS);
goto err_out;
}
}
if (new_session) { /* Change the drive parameters for the new mode */
#if DEBUG
if (debugging)
printk(OSST_DEB_MSG "%s:D: New Session\n", name);
#endif
STp->density_changed = STp->blksize_changed = 0;
STp->compression_changed = 0;
}
/*
* properly position the tape and check the ADR headers
*/
if (STp->door_locked == ST_UNLOCKED) {
if (do_door_lock(STp, 1))
printk(KERN_INFO "%s:I: Can't lock drive door\n", name);
else
STp->door_locked = ST_LOCKED_AUTO;
}
osst_analyze_headers(STp, &SRpnt);
osst_release_request(SRpnt);
SRpnt = NULL;
return 0;
err_out:
if (SRpnt != NULL)
osst_release_request(SRpnt);
normalize_buffer(STp->buffer);
STp->header_ok = 0;
STp->in_use = 0;
scsi_device_put(STp->device);
return retval;
}
/* BKL pushdown: spaghetti avoidance wrapper */
static int os_scsi_tape_open(struct inode * inode, struct file * filp)
{
int ret;
lock_kernel();
ret = __os_scsi_tape_open(inode, filp);
unlock_kernel();
return ret;
}
/* Flush the tape buffer before close */
static int os_scsi_tape_flush(struct file * filp, fl_owner_t id)
{
int result = 0, result2;
struct osst_tape * STp = filp->private_data;
struct st_modedef * STm = &(STp->modes[STp->current_mode]);
struct st_partstat * STps = &(STp->ps[STp->partition]);
struct osst_request * SRpnt = NULL;
char * name = tape_name(STp);
if (file_count(filp) > 1)
return 0;
if ((STps->rw == ST_WRITING || STp->dirty) && !STp->pos_unknown) {
STp->write_type = OS_WRITE_DATA;
result = osst_flush_write_buffer(STp, &SRpnt);
if (result != 0 && result != (-ENOSPC))
goto out;
}
if ( STps->rw >= ST_WRITING && !STp->pos_unknown) {
#if DEBUG
if (debugging) {
printk(OSST_DEB_MSG "%s:D: File length %ld bytes.\n",
name, (long)(filp->f_pos));
printk(OSST_DEB_MSG "%s:D: Async write waits %d, finished %d.\n",
name, STp->nbr_waits, STp->nbr_finished);
}
#endif
result = osst_write_trailer(STp, &SRpnt, !(STp->rew_at_close));
#if DEBUG
if (debugging)
printk(OSST_DEB_MSG "%s:D: Buffer flushed, %d EOF(s) written\n",
name, 1+STp->two_fm);
#endif
}
else if (!STp->rew_at_close) {
STps = &(STp->ps[STp->partition]);
if (!STm->sysv || STps->rw != ST_READING) {
if (STp->can_bsr)
result = osst_flush_buffer(STp, &SRpnt, 0); /* this is the default path */
else if (STps->eof == ST_FM_HIT) {
result = cross_eof(STp, &SRpnt, 0);
if (result) {
if (STps->drv_file >= 0)
STps->drv_file++;
STps->drv_block = 0;
STps->eof = ST_FM;
}
else
STps->eof = ST_NOEOF;
}
}
else if ((STps->eof == ST_NOEOF &&
!(result = cross_eof(STp, &SRpnt, 1))) ||
STps->eof == ST_FM_HIT) {
if (STps->drv_file >= 0)
STps->drv_file++;
STps->drv_block = 0;
STps->eof = ST_FM;
}
}
out:
if (STp->rew_at_close) {
result2 = osst_position_tape_and_confirm(STp, &SRpnt, STp->first_data_ppos);
STps->drv_file = STps->drv_block = STp->frame_seq_number = STp->logical_blk_num = 0;
if (result == 0 && result2 < 0)
result = result2;
}
if (SRpnt) osst_release_request(SRpnt);
if (STp->abort_count || STp->recover_count) {
printk(KERN_INFO "%s:I:", name);
if (STp->abort_count)
printk(" %d unrecovered errors", STp->abort_count);
if (STp->recover_count)
printk(" %d recovered errors", STp->recover_count);
if (STp->write_count)
printk(" in %d frames written", STp->write_count);
if (STp->read_count)
printk(" in %d frames read", STp->read_count);
printk("\n");
STp->recover_count = 0;
STp->abort_count = 0;
}
STp->write_count = 0;
STp->read_count = 0;
return result;
}
/* Close the device and release it */
static int os_scsi_tape_close(struct inode * inode, struct file * filp)
{
int result = 0;
struct osst_tape * STp = filp->private_data;
if (STp->door_locked == ST_LOCKED_AUTO)
do_door_lock(STp, 0);
if (STp->raw)
STp->header_ok = 0;
normalize_buffer(STp->buffer);
write_lock(&os_scsi_tapes_lock);
STp->in_use = 0;
write_unlock(&os_scsi_tapes_lock);
scsi_device_put(STp->device);
return result;
}
/* The ioctl command */
static int osst_ioctl(struct inode * inode,struct file * file,
unsigned int cmd_in, unsigned long arg)
{
int i, cmd_nr, cmd_type, blk, retval = 0;
struct st_modedef * STm;
struct st_partstat * STps;
struct osst_request * SRpnt = NULL;
struct osst_tape * STp = file->private_data;
char * name = tape_name(STp);
void __user * p = (void __user *)arg;
if (mutex_lock_interruptible(&STp->lock))
return -ERESTARTSYS;
#if DEBUG
if (debugging && !STp->in_use) {
printk(OSST_DEB_MSG "%s:D: Incorrect device.\n", name);
retval = (-EIO);
goto out;
}
#endif
STm = &(STp->modes[STp->current_mode]);
STps = &(STp->ps[STp->partition]);
/*
* If we are in the middle of error recovery, don't let anyone
* else try and use this device. Also, if error recovery fails, it
* may try and take the device offline, in which case all further
* access to the device is prohibited.
*/
if( !scsi_block_when_processing_errors(STp->device) ) {
retval = (-ENXIO);
goto out;
}
cmd_type = _IOC_TYPE(cmd_in);
cmd_nr = _IOC_NR(cmd_in);
#if DEBUG
printk(OSST_DEB_MSG "%s:D: Ioctl %d,%d in %s mode\n", name,
cmd_type, cmd_nr, STp->raw?"raw":"normal");
#endif
if (cmd_type == _IOC_TYPE(MTIOCTOP) && cmd_nr == _IOC_NR(MTIOCTOP)) {
struct mtop mtc;
int auto_weof = 0;
if (_IOC_SIZE(cmd_in) != sizeof(mtc)) {
retval = (-EINVAL);
goto out;
}
i = copy_from_user((char *) &mtc, p, sizeof(struct mtop));
if (i) {
retval = (-EFAULT);
goto out;
}
if (mtc.mt_op == MTSETDRVBUFFER && !capable(CAP_SYS_ADMIN)) {
printk(KERN_WARNING "%s:W: MTSETDRVBUFFER only allowed for root.\n", name);
retval = (-EPERM);
goto out;
}
if (!STm->defined && (mtc.mt_op != MTSETDRVBUFFER && (mtc.mt_count & MT_ST_OPTIONS) == 0)) {
retval = (-ENXIO);
goto out;
}
if (!STp->pos_unknown) {
if (STps->eof == ST_FM_HIT) {
if (mtc.mt_op == MTFSF || mtc.mt_op == MTFSFM|| mtc.mt_op == MTEOM) {
mtc.mt_count -= 1;
if (STps->drv_file >= 0)
STps->drv_file += 1;
}
else if (mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM) {
mtc.mt_count += 1;
if (STps->drv_file >= 0)
STps->drv_file += 1;
}
}
if (mtc.mt_op == MTSEEK) {
/* Old position must be restored if partition will be changed */
i = !STp->can_partitions || (STp->new_partition != STp->partition);
}
else {
i = mtc.mt_op == MTREW || mtc.mt_op == MTOFFL ||
mtc.mt_op == MTRETEN || mtc.mt_op == MTEOM ||
mtc.mt_op == MTLOCK || mtc.mt_op == MTLOAD ||
mtc.mt_op == MTFSF || mtc.mt_op == MTFSFM ||
mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM ||
mtc.mt_op == MTCOMPRESSION;
}
i = osst_flush_buffer(STp, &SRpnt, i);
if (i < 0) {
retval = i;
goto out;
}
}
else {
/*
* If there was a bus reset, block further access
* to this device. If the user wants to rewind the tape,
* then reset the flag and allow access again.
*/
if(mtc.mt_op != MTREW &&
mtc.mt_op != MTOFFL &&
mtc.mt_op != MTRETEN &&
mtc.mt_op != MTERASE &&
mtc.mt_op != MTSEEK &&
mtc.mt_op != MTEOM) {
retval = (-EIO);
goto out;
}
reset_state(STp);
/* remove this when the midlevel properly clears was_reset */
STp->device->was_reset = 0;
}
if (mtc.mt_op != MTCOMPRESSION && mtc.mt_op != MTLOCK &&
mtc.mt_op != MTNOP && mtc.mt_op != MTSETBLK &&
mtc.mt_op != MTSETDENSITY && mtc.mt_op != MTSETDRVBUFFER &&
mtc.mt_op != MTMKPART && mtc.mt_op != MTSETPART &&
mtc.mt_op != MTWEOF && mtc.mt_op != MTWSM ) {
/*
* The user tells us to move to another position on the tape.
* If we were appending to the tape content, that would leave
* the tape without proper end, in that case write EOD and
* update the header to reflect its position.
*/
#if DEBUG
printk(KERN_WARNING "%s:D: auto_weod %s at ffp=%d,efp=%d,fsn=%d,lbn=%d,fn=%d,bn=%d\n", name,
STps->rw >= ST_WRITING ? "write" : STps->rw == ST_READING ? "read" : "idle",
STp->first_frame_position, STp->eod_frame_ppos, STp->frame_seq_number,
STp->logical_blk_num, STps->drv_file, STps->drv_block );
#endif
if (STps->rw >= ST_WRITING && STp->first_frame_position >= STp->eod_frame_ppos) {
auto_weof = ((STp->write_type != OS_WRITE_NEW_MARK) &&
!(mtc.mt_op == MTREW || mtc.mt_op == MTOFFL));
i = osst_write_trailer(STp, &SRpnt,
!(mtc.mt_op == MTREW || mtc.mt_op == MTOFFL));
#if DEBUG
printk(KERN_WARNING "%s:D: post trailer xeof=%d,ffp=%d,efp=%d,fsn=%d,lbn=%d,fn=%d,bn=%d\n",
name, auto_weof, STp->first_frame_position, STp->eod_frame_ppos,
STp->frame_seq_number, STp->logical_blk_num, STps->drv_file, STps->drv_block );
#endif
if (i < 0) {
retval = i;
goto out;
}
}
STps->rw = ST_IDLE;
}
if (mtc.mt_op == MTOFFL && STp->door_locked != ST_UNLOCKED)
do_door_lock(STp, 0); /* Ignore result! */
if (mtc.mt_op == MTSETDRVBUFFER &&
(mtc.mt_count & MT_ST_OPTIONS) != 0) {
retval = osst_set_options(STp, mtc.mt_count);
goto out;
}
if (mtc.mt_op == MTSETPART) {
if (mtc.mt_count >= STp->nbr_partitions)
retval = -EINVAL;
else {
STp->new_partition = mtc.mt_count;
retval = 0;
}
goto out;
}
if (mtc.mt_op == MTMKPART) {
if (!STp->can_partitions) {
retval = (-EINVAL);
goto out;
}
if ((i = osst_int_ioctl(STp, &SRpnt, MTREW, 0)) < 0 /*||
(i = partition_tape(inode, mtc.mt_count)) < 0*/) {
retval = i;
goto out;
}
for (i=0; i < ST_NBR_PARTITIONS; i++) {
STp->ps[i].rw = ST_IDLE;
STp->ps[i].at_sm = 0;
STp->ps[i].last_block_valid = 0;
}
STp->partition = STp->new_partition = 0;
STp->nbr_partitions = 1; /* Bad guess ?-) */
STps->drv_block = STps->drv_file = 0;
retval = 0;
goto out;
}
if (mtc.mt_op == MTSEEK) {
if (STp->raw)
i = osst_set_frame_position(STp, &SRpnt, mtc.mt_count, 0);
else
i = osst_seek_sector(STp, &SRpnt, mtc.mt_count);
if (!STp->can_partitions)
STp->ps[0].rw = ST_IDLE;
retval = i;
goto out;
}
if (mtc.mt_op == MTLOCK || mtc.mt_op == MTUNLOCK) {
retval = do_door_lock(STp, (mtc.mt_op == MTLOCK));
goto out;
}
if (auto_weof)
cross_eof(STp, &SRpnt, 0);
if (mtc.mt_op == MTCOMPRESSION)
retval = -EINVAL; /* OnStream drives don't have compression hardware */
else
/* MTBSF MTBSFM MTBSR MTBSS MTEOM MTERASE MTFSF MTFSFB MTFSR MTFSS
* MTLOAD MTOFFL MTRESET MTRETEN MTREW MTUNLOAD MTWEOF MTWSM */
retval = osst_int_ioctl(STp, &SRpnt, mtc.mt_op, mtc.mt_count);
goto out;
}
if (!STm->defined) {
retval = (-ENXIO);
goto out;
}
if ((i = osst_flush_buffer(STp, &SRpnt, 0)) < 0) {
retval = i;
goto out;
}
if (cmd_type == _IOC_TYPE(MTIOCGET) && cmd_nr == _IOC_NR(MTIOCGET)) {
struct mtget mt_status;
if (_IOC_SIZE(cmd_in) != sizeof(struct mtget)) {
retval = (-EINVAL);
goto out;
}
mt_status.mt_type = MT_ISONSTREAM_SC;
mt_status.mt_erreg = STp->recover_erreg << MT_ST_SOFTERR_SHIFT;
mt_status.mt_dsreg =
((STp->block_size << MT_ST_BLKSIZE_SHIFT) & MT_ST_BLKSIZE_MASK) |
((STp->density << MT_ST_DENSITY_SHIFT) & MT_ST_DENSITY_MASK);
mt_status.mt_blkno = STps->drv_block;
mt_status.mt_fileno = STps->drv_file;
if (STp->block_size != 0) {
if (STps->rw == ST_WRITING)
mt_status.mt_blkno += (STp->buffer)->buffer_bytes / STp->block_size;
else if (STps->rw == ST_READING)
mt_status.mt_blkno -= ((STp->buffer)->buffer_bytes +
STp->block_size - 1) / STp->block_size;
}
mt_status.mt_gstat = 0;
if (STp->drv_write_prot)
mt_status.mt_gstat |= GMT_WR_PROT(0xffffffff);
if (mt_status.mt_blkno == 0) {
if (mt_status.mt_fileno == 0)
mt_status.mt_gstat |= GMT_BOT(0xffffffff);
else
mt_status.mt_gstat |= GMT_EOF(0xffffffff);
}
mt_status.mt_resid = STp->partition;
if (STps->eof == ST_EOM_OK || STps->eof == ST_EOM_ERROR)
mt_status.mt_gstat |= GMT_EOT(0xffffffff);
else if (STps->eof >= ST_EOM_OK)
mt_status.mt_gstat |= GMT_EOD(0xffffffff);
if (STp->density == 1)
mt_status.mt_gstat |= GMT_D_800(0xffffffff);
else if (STp->density == 2)
mt_status.mt_gstat |= GMT_D_1600(0xffffffff);
else if (STp->density == 3)
mt_status.mt_gstat |= GMT_D_6250(0xffffffff);
if (STp->ready == ST_READY)
mt_status.mt_gstat |= GMT_ONLINE(0xffffffff);
if (STp->ready == ST_NO_TAPE)
mt_status.mt_gstat |= GMT_DR_OPEN(0xffffffff);
if (STps->at_sm)
mt_status.mt_gstat |= GMT_SM(0xffffffff);
if (STm->do_async_writes || (STm->do_buffer_writes && STp->block_size != 0) ||
STp->drv_buffer != 0)
mt_status.mt_gstat |= GMT_IM_REP_EN(0xffffffff);
i = copy_to_user(p, &mt_status, sizeof(struct mtget));
if (i) {
retval = (-EFAULT);
goto out;
}
STp->recover_erreg = 0; /* Clear after read */
retval = 0;
goto out;
} /* End of MTIOCGET */
if (cmd_type == _IOC_TYPE(MTIOCPOS) && cmd_nr == _IOC_NR(MTIOCPOS)) {
struct mtpos mt_pos;
if (_IOC_SIZE(cmd_in) != sizeof(struct mtpos)) {
retval = (-EINVAL);
goto out;
}
if (STp->raw)
blk = osst_get_frame_position(STp, &SRpnt);
else
blk = osst_get_sector(STp, &SRpnt);
if (blk < 0) {
retval = blk;
goto out;
}
mt_pos.mt_blkno = blk;
i = copy_to_user(p, &mt_pos, sizeof(struct mtpos));
if (i)
retval = -EFAULT;
goto out;
}
if (SRpnt) osst_release_request(SRpnt);
mutex_unlock(&STp->lock);
return scsi_ioctl(STp->device, cmd_in, p);
out:
if (SRpnt) osst_release_request(SRpnt);
mutex_unlock(&STp->lock);
return retval;
}
#ifdef CONFIG_COMPAT
static long osst_compat_ioctl(struct file * file, unsigned int cmd_in, unsigned long arg)
{
struct osst_tape *STp = file->private_data;
struct scsi_device *sdev = STp->device;
int ret = -ENOIOCTLCMD;
if (sdev->host->hostt->compat_ioctl) {
ret = sdev->host->hostt->compat_ioctl(sdev, cmd_in, (void __user *)arg);
}
return ret;
}
#endif
/* Memory handling routines */
/* Try to allocate a new tape buffer skeleton. Caller must not hold os_scsi_tapes_lock */
static struct osst_buffer * new_tape_buffer( int from_initialization, int need_dma, int max_sg )
{
int i;
gfp_t priority;
struct osst_buffer *tb;
if (from_initialization)
priority = GFP_ATOMIC;
else
priority = GFP_KERNEL;
i = sizeof(struct osst_buffer) + (osst_max_sg_segs - 1) * sizeof(struct scatterlist);
tb = kzalloc(i, priority);
if (!tb) {
printk(KERN_NOTICE "osst :I: Can't allocate new tape buffer.\n");
return NULL;
}
tb->sg_segs = tb->orig_sg_segs = 0;
tb->use_sg = max_sg;
tb->in_use = 1;
tb->dma = need_dma;
tb->buffer_size = 0;
#if DEBUG
if (debugging)
printk(OSST_DEB_MSG
"osst :D: Allocated tape buffer skeleton (%d bytes, %d segments, dma: %d).\n",
i, max_sg, need_dma);
#endif
return tb;
}
/* Try to allocate a temporary (while a user has the device open) enlarged tape buffer */
static int enlarge_buffer(struct osst_buffer *STbuffer, int need_dma)
{
int segs, nbr, max_segs, b_size, order, got;
gfp_t priority;
if (STbuffer->buffer_size >= OS_FRAME_SIZE)
return 1;
if (STbuffer->sg_segs) {
printk(KERN_WARNING "osst :A: Buffer not previously normalized.\n");
normalize_buffer(STbuffer);
}
/* See how many segments we can use -- need at least two */
nbr = max_segs = STbuffer->use_sg;
if (nbr <= 2)
return 0;
priority = GFP_KERNEL /* | __GFP_NOWARN */;
if (need_dma)
priority |= GFP_DMA;
/* Try to allocate the first segment up to OS_DATA_SIZE and the others
big enough to reach the goal (code assumes no segments in place) */
for (b_size = OS_DATA_SIZE, order = OSST_FIRST_ORDER; b_size >= PAGE_SIZE; order--, b_size /= 2) {
struct page *page = alloc_pages(priority, order);
STbuffer->sg[0].offset = 0;
if (page != NULL) {
sg_set_page(&STbuffer->sg[0], page, b_size, 0);
STbuffer->b_data = page_address(page);
break;
}
}
if (sg_page(&STbuffer->sg[0]) == NULL) {
printk(KERN_NOTICE "osst :I: Can't allocate tape buffer main segment.\n");
return 0;
}
/* Got initial segment of 'bsize,order', continue with same size if possible, except for AUX */
for (segs=STbuffer->sg_segs=1, got=b_size;
segs < max_segs && got < OS_FRAME_SIZE; ) {
struct page *page = alloc_pages(priority, (OS_FRAME_SIZE - got <= PAGE_SIZE) ? 0 : order);
STbuffer->sg[segs].offset = 0;
if (page == NULL) {
printk(KERN_WARNING "osst :W: Failed to enlarge buffer to %d bytes.\n",
OS_FRAME_SIZE);
#if DEBUG
STbuffer->buffer_size = got;
#endif
normalize_buffer(STbuffer);
return 0;
}
sg_set_page(&STbuffer->sg[segs], page, (OS_FRAME_SIZE - got <= PAGE_SIZE / 2) ? (OS_FRAME_SIZE - got) : b_size, 0);
got += STbuffer->sg[segs].length;
STbuffer->buffer_size = got;
STbuffer->sg_segs = ++segs;
}
#if DEBUG
if (debugging) {
printk(OSST_DEB_MSG
"osst :D: Expanded tape buffer (%d bytes, %d->%d segments, dma: %d, at: %p).\n",
got, STbuffer->orig_sg_segs, STbuffer->sg_segs, need_dma, STbuffer->b_data);
printk(OSST_DEB_MSG
"osst :D: segment sizes: first %d at %p, last %d bytes at %p.\n",
STbuffer->sg[0].length, page_address(STbuffer->sg[0].page),
STbuffer->sg[segs-1].length, page_address(STbuffer->sg[segs-1].page));
}
#endif
return 1;
}
/* Release the segments */
static void normalize_buffer(struct osst_buffer *STbuffer)
{
int i, order, b_size;
for (i=0; i < STbuffer->sg_segs; i++) {
for (b_size = PAGE_SIZE, order = 0;
b_size < STbuffer->sg[i].length;
b_size *= 2, order++);
__free_pages(sg_page(&STbuffer->sg[i]), order);
STbuffer->buffer_size -= STbuffer->sg[i].length;
}
#if DEBUG
if (debugging && STbuffer->orig_sg_segs < STbuffer->sg_segs)
printk(OSST_DEB_MSG "osst :D: Buffer at %p normalized to %d bytes (segs %d).\n",
STbuffer->b_data, STbuffer->buffer_size, STbuffer->sg_segs);
#endif
STbuffer->sg_segs = STbuffer->orig_sg_segs = 0;
}
/* Move data from the user buffer to the tape buffer. Returns zero (success) or
negative error code. */
static int append_to_buffer(const char __user *ubp, struct osst_buffer *st_bp, int do_count)
{
int i, cnt, res, offset;
for (i=0, offset=st_bp->buffer_bytes;
i < st_bp->sg_segs && offset >= st_bp->sg[i].length; i++)
offset -= st_bp->sg[i].length;
if (i == st_bp->sg_segs) { /* Should never happen */
printk(KERN_WARNING "osst :A: Append_to_buffer offset overflow.\n");
return (-EIO);
}
for ( ; i < st_bp->sg_segs && do_count > 0; i++) {
cnt = st_bp->sg[i].length - offset < do_count ?
st_bp->sg[i].length - offset : do_count;
res = copy_from_user(page_address(sg_page(&st_bp->sg[i])) + offset, ubp, cnt);
if (res)
return (-EFAULT);
do_count -= cnt;
st_bp->buffer_bytes += cnt;
ubp += cnt;
offset = 0;
}
if (do_count) { /* Should never happen */
printk(KERN_WARNING "osst :A: Append_to_buffer overflow (left %d).\n",
do_count);
return (-EIO);
}
return 0;
}
/* Move data from the tape buffer to the user buffer. Returns zero (success) or
negative error code. */
static int from_buffer(struct osst_buffer *st_bp, char __user *ubp, int do_count)
{
int i, cnt, res, offset;
for (i=0, offset=st_bp->read_pointer;
i < st_bp->sg_segs && offset >= st_bp->sg[i].length; i++)
offset -= st_bp->sg[i].length;
if (i == st_bp->sg_segs) { /* Should never happen */
printk(KERN_WARNING "osst :A: From_buffer offset overflow.\n");
return (-EIO);
}
for ( ; i < st_bp->sg_segs && do_count > 0; i++) {
cnt = st_bp->sg[i].length - offset < do_count ?
st_bp->sg[i].length - offset : do_count;
res = copy_to_user(ubp, page_address(sg_page(&st_bp->sg[i])) + offset, cnt);
if (res)
return (-EFAULT);
do_count -= cnt;
st_bp->buffer_bytes -= cnt;
st_bp->read_pointer += cnt;
ubp += cnt;
offset = 0;
}
if (do_count) { /* Should never happen */
printk(KERN_WARNING "osst :A: From_buffer overflow (left %d).\n", do_count);
return (-EIO);
}
return 0;
}
/* Sets the tail of the buffer after fill point to zero.
Returns zero (success) or negative error code. */
static int osst_zero_buffer_tail(struct osst_buffer *st_bp)
{
int i, offset, do_count, cnt;
for (i = 0, offset = st_bp->buffer_bytes;
i < st_bp->sg_segs && offset >= st_bp->sg[i].length; i++)
offset -= st_bp->sg[i].length;
if (i == st_bp->sg_segs) { /* Should never happen */
printk(KERN_WARNING "osst :A: Zero_buffer offset overflow.\n");
return (-EIO);
}
for (do_count = OS_DATA_SIZE - st_bp->buffer_bytes;
i < st_bp->sg_segs && do_count > 0; i++) {
cnt = st_bp->sg[i].length - offset < do_count ?
st_bp->sg[i].length - offset : do_count ;
memset(page_address(sg_page(&st_bp->sg[i])) + offset, 0, cnt);
do_count -= cnt;
offset = 0;
}
if (do_count) { /* Should never happen */
printk(KERN_WARNING "osst :A: Zero_buffer overflow (left %d).\n", do_count);
return (-EIO);
}
return 0;
}
/* Copy a osst 32K chunk of memory into the buffer.
Returns zero (success) or negative error code. */
static int osst_copy_to_buffer(struct osst_buffer *st_bp, unsigned char *ptr)
{
int i, cnt, do_count = OS_DATA_SIZE;
for (i = 0; i < st_bp->sg_segs && do_count > 0; i++) {
cnt = st_bp->sg[i].length < do_count ?
st_bp->sg[i].length : do_count ;
memcpy(page_address(sg_page(&st_bp->sg[i])), ptr, cnt);
do_count -= cnt;
ptr += cnt;
}
if (do_count || i != st_bp->sg_segs-1) { /* Should never happen */
printk(KERN_WARNING "osst :A: Copy_to_buffer overflow (left %d at sg %d).\n",
do_count, i);
return (-EIO);
}
return 0;
}
/* Copy a osst 32K chunk of memory from the buffer.
Returns zero (success) or negative error code. */
static int osst_copy_from_buffer(struct osst_buffer *st_bp, unsigned char *ptr)
{
int i, cnt, do_count = OS_DATA_SIZE;
for (i = 0; i < st_bp->sg_segs && do_count > 0; i++) {
cnt = st_bp->sg[i].length < do_count ?
st_bp->sg[i].length : do_count ;
memcpy(ptr, page_address(sg_page(&st_bp->sg[i])), cnt);
do_count -= cnt;
ptr += cnt;
}
if (do_count || i != st_bp->sg_segs-1) { /* Should never happen */
printk(KERN_WARNING "osst :A: Copy_from_buffer overflow (left %d at sg %d).\n",
do_count, i);
return (-EIO);
}
return 0;
}
/* Module housekeeping */
static void validate_options (void)
{
if (max_dev > 0)
osst_max_dev = max_dev;
if (write_threshold_kbs > 0)
osst_write_threshold = write_threshold_kbs * ST_KILOBYTE;
if (osst_write_threshold > osst_buffer_size)
osst_write_threshold = osst_buffer_size;
if (max_sg_segs >= OSST_FIRST_SG)
osst_max_sg_segs = max_sg_segs;
#if DEBUG
printk(OSST_DEB_MSG "osst :D: max tapes %d, write threshold %d, max s/g segs %d.\n",
osst_max_dev, osst_write_threshold, osst_max_sg_segs);
#endif
}
#ifndef MODULE
/* Set the boot options. Syntax: osst=xxx,yyy,...
where xxx is write threshold in 1024 byte blocks,
and yyy is number of s/g segments to use. */
static int __init osst_setup (char *str)
{
int i, ints[5];
char *stp;
stp = get_options(str, ARRAY_SIZE(ints), ints);
if (ints[0] > 0) {
for (i = 0; i < ints[0] && i < ARRAY_SIZE(parms); i++)
*parms[i].val = ints[i + 1];
} else {
while (stp != NULL) {
for (i = 0; i < ARRAY_SIZE(parms); i++) {
int len = strlen(parms[i].name);
if (!strncmp(stp, parms[i].name, len) &&
(*(stp + len) == ':' || *(stp + len) == '=')) {
*parms[i].val =
simple_strtoul(stp + len + 1, NULL, 0);
break;
}
}
if (i >= ARRAY_SIZE(parms))
printk(KERN_INFO "osst :I: Illegal parameter in '%s'\n",
stp);
stp = strchr(stp, ',');
if (stp)
stp++;
}
}
return 1;
}
__setup("osst=", osst_setup);
#endif
static const struct file_operations osst_fops = {
.owner = THIS_MODULE,
.read = osst_read,
.write = osst_write,
.ioctl = osst_ioctl,
#ifdef CONFIG_COMPAT
.compat_ioctl = osst_compat_ioctl,
#endif
.open = os_scsi_tape_open,
.flush = os_scsi_tape_flush,
.release = os_scsi_tape_close,
};
static int osst_supports(struct scsi_device * SDp)
{
struct osst_support_data {
char *vendor;
char *model;
char *rev;
char *driver_hint; /* Name of the correct driver, NULL if unknown */
};
static struct osst_support_data support_list[] = {
/* {"XXX", "Yy-", "", NULL}, example */
SIGS_FROM_OSST,
{NULL, }};
struct osst_support_data *rp;
/* We are willing to drive OnStream SC-x0 as well as the
* * IDE, ParPort, FireWire, USB variants, if accessible by
* * emulation layer (ide-scsi, usb-storage, ...) */
for (rp=&(support_list[0]); rp->vendor != NULL; rp++)
if (!strncmp(rp->vendor, SDp->vendor, strlen(rp->vendor)) &&
!strncmp(rp->model, SDp->model, strlen(rp->model)) &&
!strncmp(rp->rev, SDp->rev, strlen(rp->rev)))
return 1;
return 0;
}
/*
* sysfs support for osst driver parameter information
*/
static ssize_t osst_version_show(struct device_driver *ddd, char *buf)
{
return snprintf(buf, PAGE_SIZE, "%s\n", osst_version);
}
static DRIVER_ATTR(version, S_IRUGO, osst_version_show, NULL);
static int osst_create_sysfs_files(struct device_driver *sysfs)
{
return driver_create_file(sysfs, &driver_attr_version);
}
static void osst_remove_sysfs_files(struct device_driver *sysfs)
{
driver_remove_file(sysfs, &driver_attr_version);
}
/*
* sysfs support for accessing ADR header information
*/
static ssize_t osst_adr_rev_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct osst_tape * STp = (struct osst_tape *) dev_get_drvdata (dev);
ssize_t l = 0;
if (STp && STp->header_ok && STp->linux_media)
l = snprintf(buf, PAGE_SIZE, "%d.%d\n", STp->header_cache->major_rev, STp->header_cache->minor_rev);
return l;
}
DEVICE_ATTR(ADR_rev, S_IRUGO, osst_adr_rev_show, NULL);
static ssize_t osst_linux_media_version_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct osst_tape * STp = (struct osst_tape *) dev_get_drvdata (dev);
ssize_t l = 0;
if (STp && STp->header_ok && STp->linux_media)
l = snprintf(buf, PAGE_SIZE, "LIN%d\n", STp->linux_media_version);
return l;
}
DEVICE_ATTR(media_version, S_IRUGO, osst_linux_media_version_show, NULL);
static ssize_t osst_capacity_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct osst_tape * STp = (struct osst_tape *) dev_get_drvdata (dev);
ssize_t l = 0;
if (STp && STp->header_ok && STp->linux_media)
l = snprintf(buf, PAGE_SIZE, "%d\n", STp->capacity);
return l;
}
DEVICE_ATTR(capacity, S_IRUGO, osst_capacity_show, NULL);
static ssize_t osst_first_data_ppos_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct osst_tape * STp = (struct osst_tape *) dev_get_drvdata (dev);
ssize_t l = 0;
if (STp && STp->header_ok && STp->linux_media)
l = snprintf(buf, PAGE_SIZE, "%d\n", STp->first_data_ppos);
return l;
}
DEVICE_ATTR(BOT_frame, S_IRUGO, osst_first_data_ppos_show, NULL);
static ssize_t osst_eod_frame_ppos_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct osst_tape * STp = (struct osst_tape *) dev_get_drvdata (dev);
ssize_t l = 0;
if (STp && STp->header_ok && STp->linux_media)
l = snprintf(buf, PAGE_SIZE, "%d\n", STp->eod_frame_ppos);
return l;
}
DEVICE_ATTR(EOD_frame, S_IRUGO, osst_eod_frame_ppos_show, NULL);
static ssize_t osst_filemark_cnt_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct osst_tape * STp = (struct osst_tape *) dev_get_drvdata (dev);
ssize_t l = 0;
if (STp && STp->header_ok && STp->linux_media)
l = snprintf(buf, PAGE_SIZE, "%d\n", STp->filemark_cnt);
return l;
}
DEVICE_ATTR(file_count, S_IRUGO, osst_filemark_cnt_show, NULL);
static struct class *osst_sysfs_class;
static int osst_sysfs_init(void)
{
osst_sysfs_class = class_create(THIS_MODULE, "onstream_tape");
if (IS_ERR(osst_sysfs_class)) {
printk(KERN_ERR "osst :W: Unable to register sysfs class\n");
return PTR_ERR(osst_sysfs_class);
}
return 0;
}
static void osst_sysfs_destroy(dev_t dev)
{
device_destroy(osst_sysfs_class, dev);
}
static int osst_sysfs_add(dev_t dev, struct device *device, struct osst_tape * STp, char * name)
{
struct device *osst_member;
int err;
osst_member = device_create(osst_sysfs_class, device, dev, STp,
"%s", name);
if (IS_ERR(osst_member)) {
printk(KERN_WARNING "osst :W: Unable to add sysfs class member %s\n", name);
return PTR_ERR(osst_member);
}
err = device_create_file(osst_member, &dev_attr_ADR_rev);
if (err)
goto err_out;
err = device_create_file(osst_member, &dev_attr_media_version);
if (err)
goto err_out;
err = device_create_file(osst_member, &dev_attr_capacity);
if (err)
goto err_out;
err = device_create_file(osst_member, &dev_attr_BOT_frame);
if (err)
goto err_out;
err = device_create_file(osst_member, &dev_attr_EOD_frame);
if (err)
goto err_out;
err = device_create_file(osst_member, &dev_attr_file_count);
if (err)
goto err_out;
return 0;
err_out:
osst_sysfs_destroy(dev);
return err;
}
static void osst_sysfs_cleanup(void)
{
class_destroy(osst_sysfs_class);
}
/*
* osst startup / cleanup code
*/
static int osst_probe(struct device *dev)
{
struct scsi_device * SDp = to_scsi_device(dev);
struct osst_tape * tpnt;
struct st_modedef * STm;
struct st_partstat * STps;
struct osst_buffer * buffer;
struct gendisk * drive;
int i, dev_num, err = -ENODEV;
if (SDp->type != TYPE_TAPE || !osst_supports(SDp))
return -ENODEV;
drive = alloc_disk(1);
if (!drive) {
printk(KERN_ERR "osst :E: Out of memory. Device not attached.\n");
return -ENODEV;
}
/* if this is the first attach, build the infrastructure */
write_lock(&os_scsi_tapes_lock);
if (os_scsi_tapes == NULL) {
os_scsi_tapes =
(struct osst_tape **)kmalloc(osst_max_dev * sizeof(struct osst_tape *),
GFP_ATOMIC);
if (os_scsi_tapes == NULL) {
write_unlock(&os_scsi_tapes_lock);
printk(KERN_ERR "osst :E: Unable to allocate array for OnStream SCSI tapes.\n");
goto out_put_disk;
}
for (i=0; i < osst_max_dev; ++i) os_scsi_tapes[i] = NULL;
}
if (osst_nr_dev >= osst_max_dev) {
write_unlock(&os_scsi_tapes_lock);
printk(KERN_ERR "osst :E: Too many tape devices (max. %d).\n", osst_max_dev);
goto out_put_disk;
}
/* find a free minor number */
for (i=0; os_scsi_tapes[i] && i<osst_max_dev; i++);
if(i >= osst_max_dev) panic ("Scsi_devices corrupt (osst)");
dev_num = i;
/* allocate a struct osst_tape for this device */
tpnt = kzalloc(sizeof(struct osst_tape), GFP_ATOMIC);
if (!tpnt) {
write_unlock(&os_scsi_tapes_lock);
printk(KERN_ERR "osst :E: Can't allocate device descriptor, device not attached.\n");
goto out_put_disk;
}
/* allocate a buffer for this device */
i = SDp->host->sg_tablesize;
if (osst_max_sg_segs < i)
i = osst_max_sg_segs;
buffer = new_tape_buffer(1, SDp->host->unchecked_isa_dma, i);
if (buffer == NULL) {
write_unlock(&os_scsi_tapes_lock);
printk(KERN_ERR "osst :E: Unable to allocate a tape buffer, device not attached.\n");
kfree(tpnt);
goto out_put_disk;
}
os_scsi_tapes[dev_num] = tpnt;
tpnt->buffer = buffer;
tpnt->device = SDp;
drive->private_data = &tpnt->driver;
sprintf(drive->disk_name, "osst%d", dev_num);
tpnt->driver = &osst_template;
tpnt->drive = drive;
tpnt->in_use = 0;
tpnt->capacity = 0xfffff;
tpnt->dirty = 0;
tpnt->drv_buffer = 1; /* Try buffering if no mode sense */
tpnt->restr_dma = (SDp->host)->unchecked_isa_dma;
tpnt->density = 0;
tpnt->do_auto_lock = OSST_AUTO_LOCK;
tpnt->can_bsr = OSST_IN_FILE_POS;
tpnt->can_partitions = 0;
tpnt->two_fm = OSST_TWO_FM;
tpnt->fast_mteom = OSST_FAST_MTEOM;
tpnt->scsi2_logical = OSST_SCSI2LOGICAL; /* FIXME */
tpnt->write_threshold = osst_write_threshold;
tpnt->default_drvbuffer = 0xff; /* No forced buffering */
tpnt->partition = 0;
tpnt->new_partition = 0;
tpnt->nbr_partitions = 0;
tpnt->min_block = 512;
tpnt->max_block = OS_DATA_SIZE;
tpnt->timeout = OSST_TIMEOUT;
tpnt->long_timeout = OSST_LONG_TIMEOUT;
/* Recognize OnStream tapes */
/* We don't need to test for OnStream, as this has been done in detect () */
tpnt->os_fw_rev = osst_parse_firmware_rev (SDp->rev);
tpnt->omit_blklims = 1;
tpnt->poll = (strncmp(SDp->model, "DI-", 3) == 0) ||
(strncmp(SDp->model, "FW-", 3) == 0) || OSST_FW_NEED_POLL(tpnt->os_fw_rev,SDp);
tpnt->frame_in_buffer = 0;
tpnt->header_ok = 0;
tpnt->linux_media = 0;
tpnt->header_cache = NULL;
for (i=0; i < ST_NBR_MODES; i++) {
STm = &(tpnt->modes[i]);
STm->defined = 0;
STm->sysv = OSST_SYSV;
STm->defaults_for_writes = 0;
STm->do_async_writes = OSST_ASYNC_WRITES;
STm->do_buffer_writes = OSST_BUFFER_WRITES;
STm->do_read_ahead = OSST_READ_AHEAD;
STm->default_compression = ST_DONT_TOUCH;
STm->default_blksize = 512;
STm->default_density = (-1); /* No forced density */
}
for (i=0; i < ST_NBR_PARTITIONS; i++) {
STps = &(tpnt->ps[i]);
STps->rw = ST_IDLE;
STps->eof = ST_NOEOF;
STps->at_sm = 0;
STps->last_block_valid = 0;
STps->drv_block = (-1);
STps->drv_file = (-1);
}
tpnt->current_mode = 0;
tpnt->modes[0].defined = 1;
tpnt->modes[2].defined = 1;
tpnt->density_changed = tpnt->compression_changed = tpnt->blksize_changed = 0;
mutex_init(&tpnt->lock);
osst_nr_dev++;
write_unlock(&os_scsi_tapes_lock);
{
char name[8];
/* Rewind entry */
err = osst_sysfs_add(MKDEV(OSST_MAJOR, dev_num), dev, tpnt, tape_name(tpnt));
if (err)
goto out_free_buffer;
/* No-rewind entry */
snprintf(name, 8, "%s%s", "n", tape_name(tpnt));
err = osst_sysfs_add(MKDEV(OSST_MAJOR, dev_num + 128), dev, tpnt, name);
if (err)
goto out_free_sysfs1;
}
sdev_printk(KERN_INFO, SDp,
"osst :I: Attached OnStream %.5s tape as %s\n",
SDp->model, tape_name(tpnt));
return 0;
out_free_sysfs1:
osst_sysfs_destroy(MKDEV(OSST_MAJOR, dev_num));
out_free_buffer:
kfree(buffer);
out_put_disk:
put_disk(drive);
return err;
};
static int osst_remove(struct device *dev)
{
struct scsi_device * SDp = to_scsi_device(dev);
struct osst_tape * tpnt;
int i;
if ((SDp->type != TYPE_TAPE) || (osst_nr_dev <= 0))
return 0;
write_lock(&os_scsi_tapes_lock);
for(i=0; i < osst_max_dev; i++) {
if((tpnt = os_scsi_tapes[i]) && (tpnt->device == SDp)) {
osst_sysfs_destroy(MKDEV(OSST_MAJOR, i));
osst_sysfs_destroy(MKDEV(OSST_MAJOR, i+128));
tpnt->device = NULL;
put_disk(tpnt->drive);
os_scsi_tapes[i] = NULL;
osst_nr_dev--;
write_unlock(&os_scsi_tapes_lock);
vfree(tpnt->header_cache);
if (tpnt->buffer) {
normalize_buffer(tpnt->buffer);
kfree(tpnt->buffer);
}
kfree(tpnt);
return 0;
}
}
write_unlock(&os_scsi_tapes_lock);
return 0;
}
static int __init init_osst(void)
{
int err;
printk(KERN_INFO "osst :I: Tape driver with OnStream support version %s\nosst :I: %s\n", osst_version, cvsid);
validate_options();
err = osst_sysfs_init();
if (err)
return err;
err = register_chrdev(OSST_MAJOR, "osst", &osst_fops);
if (err < 0) {
printk(KERN_ERR "osst :E: Unable to register major %d for OnStream tapes\n", OSST_MAJOR);
goto err_out;
}
err = scsi_register_driver(&osst_template.gendrv);
if (err)
goto err_out_chrdev;
err = osst_create_sysfs_files(&osst_template.gendrv);
if (err)
goto err_out_scsidrv;
return 0;
err_out_scsidrv:
scsi_unregister_driver(&osst_template.gendrv);
err_out_chrdev:
unregister_chrdev(OSST_MAJOR, "osst");
err_out:
osst_sysfs_cleanup();
return err;
}
static void __exit exit_osst (void)
{
int i;
struct osst_tape * STp;
osst_remove_sysfs_files(&osst_template.gendrv);
scsi_unregister_driver(&osst_template.gendrv);
unregister_chrdev(OSST_MAJOR, "osst");
osst_sysfs_cleanup();
if (os_scsi_tapes) {
for (i=0; i < osst_max_dev; ++i) {
if (!(STp = os_scsi_tapes[i])) continue;
/* This is defensive, supposed to happen during detach */
vfree(STp->header_cache);
if (STp->buffer) {
normalize_buffer(STp->buffer);
kfree(STp->buffer);
}
put_disk(STp->drive);
kfree(STp);
}
kfree(os_scsi_tapes);
}
printk(KERN_INFO "osst :I: Unloaded.\n");
}
module_init(init_osst);
module_exit(exit_osst);
