/*******************************************************************************
STMMAC Ethernet Driver -- MDIO bus implementation
Provides Bus interface for MII registers
Copyright (C) 2007-2009 STMicroelectronics Ltd
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
version 2, as published by the Free Software Foundation.
This program is distributed in the hope it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
The full GNU General Public License is included in this distribution in
the file called "COPYING".
Author: Carl Shaw <carl.shaw@st.com>
Maintainer: Giuseppe Cavallaro <peppe.cavallaro@st.com>
*******************************************************************************/
#include <linux/mii.h>
#include <linux/phy.h>
#include <linux/slab.h>
#include "stmmac.h"
#define MII_BUSY 0x00000001
#define MII_WRITE 0x00000002
/**
* stmmac_mdio_read
* @bus: points to the mii_bus structure
* @phyaddr: MII addr reg bits 15-11
* @phyreg: MII addr reg bits 10-6
* Description: it reads data from the MII register from within the phy device.
* For the 7111 GMAC, we must set the bit 0 in the MII address register while
* accessing the PHY registers.
* Fortunately, it seems this has no drawback for the 7109 MAC.
*/
static int stmmac_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
{
struct net_device *ndev = bus->priv;
struct stmmac_priv *priv = netdev_priv(ndev);
unsigned int mii_address = priv->hw->mii.addr;
unsigned int mii_data = priv->hw->mii.data;
int data;
u16 regValue = (((phyaddr << 11) & (0x0000F800)) |
((phyreg << 6) & (0x000007C0)));
regValue |= MII_BUSY | ((priv->plat->clk_csr & 7) << 2);
do {} while (((readl(priv->ioaddr + mii_address)) & MII_BUSY) == 1);
writel(regValue, priv->ioaddr + mii_address);
do {} while (((readl(priv->ioaddr + mii_address)) & MII_BUSY) == 1);
/* Read the data from the MII data register */
data = (int)readl(priv->ioaddr + mii_data);
return data;
}
/**
* stmmac_mdio_write
* @bus: points to the mii_bus structure
* @phyaddr: MII addr reg bits 15-11
* @phyreg: MII addr reg bits 10-6
* @phydata: phy data
* Description: it writes the data into the MII register from within the device.
*/
static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg,
u16 phydata)
{
struct net_device *ndev = bus->priv;
struct stmmac_priv *priv = netdev_priv(ndev);
unsigned int mii_address = priv->hw->mii.addr;
unsigned int mii_data = priv->hw->mii.data;
u16 value =
(((phyaddr << 11) & (0x0000F800)) | ((phyreg << 6) & (0x000007C0)))
| MII_WRITE;
value |= MII_BUSY | ((priv->plat->clk_csr & 7) << 2);
/* Wait until any existing MII operation is complete */
do {} while (((readl(priv->ioaddr + mii_address)) & MII_BUSY) == 1);
/* Set the MII address register to write */
writel(phydata, priv->ioaddr + mii_data);
writel(value, priv->ioaddr + mii_address);
/* Wait until any existing MII operation is complete */
do {} while (((readl(priv->ioaddr + mii_address)) & MII_BUSY) == 1);
return 0;
}
/**
* stmmac_mdio_reset
* @bus: points to the mii_bus structure
* Description: reset the MII bus
*/
static int stmmac_mdio_reset(struct mii_bus *bus)
{
struct net_device *ndev = bus->priv;
struct stmmac_priv *priv = netdev_priv(ndev);
unsigned int mii_address = priv->hw->mii.addr;
if (priv->phy_reset) {
pr_debug("stmmac_mdio_reset: calling phy_reset\n");
priv->phy_reset(priv->plat->bsp_priv);
}
/* This is a workaround for problems with the STE101P PHY.
* It doesn't complete its reset until at least one clock cycle
* on MDC, so perform a dummy mdio read.
*/
writel(0, priv->ioaddr + mii_address);
return 0;
}
/**
* stmmac_mdio_register
* @ndev: net device structure
* Description: it registers the MII bus
*/
int stmmac_mdio_register(struct net_device *ndev)
{
int err = 0;
struct mii_bus *new_bus;
int *irqlist;
struct stmmac_priv *priv = netdev_priv(ndev);
int addr, found;
new_bus = mdiobus_alloc();
if (new_bus == NULL)
return -ENOMEM;
irqlist = kzalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
if (irqlist == NULL) {
err = -ENOMEM;
goto irqlist_alloc_fail;
}
/* Assign IRQ to phy at address phy_addr */
if (priv->phy_addr != -1)
irqlist[priv->phy_addr] = priv->phy_irq;
new_bus->name = "STMMAC MII Bus";
new_bus->read = &stmmac_mdio_read;
new_bus->write = &stmmac_mdio_write;
new_bus->reset = &stmmac_mdio_reset;
snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", priv->plat->bus_id);
new_bus->priv = ndev;
new_bus->irq = irqlist;
new_bus->phy_mask = priv->phy_mask;
new_bus->parent = priv->device;
err = mdiobus_register(new_bus);
if (err != 0) {
pr_err("%s: Cannot register as MDIO bus\n", new_bus->name);
goto bus_register_fail;
}
priv->mii = new_bus;
found = 0;
for (addr = 0; addr < 32; addr++) {
struct phy_device *phydev = new_bus->phy_map[addr];
if (phydev) {
if (priv->phy_addr == -1) {
priv->phy_addr = addr;
phydev->irq = priv->phy_irq;
irqlist[addr] = priv->phy_irq;
}
pr_info("%s: PHY ID %08x at %d IRQ %d (%s)%s\n",
ndev->name, phydev->phy_id, addr,
phydev->irq, dev_name(&phydev->dev),
(addr == priv->phy_addr) ? " active" : "");
found = 1;
}
}
if (!found)
pr_warning("%s: No PHY found\n", ndev->name);
return 0;
bus_register_fail:
kfree(irqlist);
irqlist_alloc_fail:
kfree(new_bus);
return err;
}
/**
* stmmac_mdio_unregister
* @ndev: net device structure
* Description: it unregisters the MII bus
*/
int stmmac_mdio_unregister(struct net_device *ndev)
{
struct stmmac_priv *priv = netdev_priv(ndev);
mdiobus_unregister(priv->mii);
priv->mii->priv = NULL;
kfree(priv->mii);
return 0;
}
