blob: 290186e44e6bdbe34d1f41805bca894e38c7e741 (
plain) (
tree)
|
|
# SPDX-License-Identifier: GPL-2.0-only
menuconfig EXTCON
tristate "External Connector Class (extcon) support"
help
Say Y here to enable external connector class (extcon) support.
This allows monitoring external connectors by userspace
via sysfs and uevent and supports external connectors with
multiple states; i.e., an extcon that may have multiple
cables attached. For example, an external connector of a device
may be used to connect an HDMI cable and a AC adaptor, and to
host USB ports. Many of 30-pin connectors including PDMI are
also good examples.
if EXTCON
comment "Extcon Device Drivers"
config EXTCON_ADC_JACK
tristate "ADC Jack extcon support"
depends on IIO
help
Say Y here to enable extcon device driver based on ADC values.
config EXTCON_AXP288
tristate "X-Power AXP288 EXTCON support"
depends on MFD_AXP20X && USB_SUPPORT && X86 && ACPI && IOSF_MBI
select USB_ROLE_SWITCH
help
Say Y here to enable support for USB peripheral detection
and USB MUX switching by X-Power AXP288 PMIC.
config EXTCON_FSA9480
tristate "FSA9480 EXTCON Support"
depends on INPUT && I2C
select IRQ_DOMAIN
select REGMAP_I2C
help
If you say yes here you get support for the Fairchild Semiconductor
FSA9480 microUSB switch and accessory detector chip. The FSA9480 is a USB
port accessory detector and switch. The FSA9480 is fully controlled using
I2C and enables USB data, stereo and mono audio, video, microphone
and UART data to use a common connector port.
config EXTCON_GPIO
tristate "GPIO extcon support"
depends on GPIOLIB || COMPILE_TEST
help
Say Y here to enable GPIO based extcon support. Note that GPIO
extcon supports single state per extcon instance.
config EXTCON_INTEL_INT3496
tristate "Intel INT3496 ACPI device extcon driver"
depends on GPIOLIB && ACPI && (X86 || COMPILE_TEST)
help
Say Y here to enable extcon support for USB OTG ports controlled by
an Intel INT3496 ACPI device.
This ACPI device is typically found on Intel Baytrail or Cherrytrail
based tablets, or other Baytrail / Cherrytrail devices.
config EXTCON_INTEL_CHT_WC
tristate "Intel Cherrytrail Whiskey Cove PMIC extcon driver"
depends on INTEL_SOC_PMIC_CHTWC
depends on USB_SUPPORT
select USB_ROLE_SWITCH
help
Say Y here to enable extcon support for charger detection / control
on the Intel Cherrytrail Whiskey Cove PMIC.
config EXTCON_INTEL_MRFLD
tristate "Intel Merrifield Basin Cove PMIC extcon driver"
depends on INTEL_SOC_PMIC_MRFLD
help
Say Y here to enable extcon support for charger detection / control
on the Intel Merrifield Basin Cove PMIC.
config EXTCON_MAX14577
tristate "Maxim MAX14577/77836 EXTCON Support"
depends on MFD_MAX14577
select IRQ_DOMAIN
select REGMAP_I2C
help
If you say yes here you get support for the MUIC device of
Maxim MAX14577/77836. The MAX14577/77836 MUIC is a USB port accessory
detector and switch.
config EXTCON_MAX3355
tristate "Maxim MAX3355 USB OTG EXTCON Support"
depends on GPIOLIB || COMPILE_TEST
help
If you say yes here you get support for the USB OTG role detection by
MAX3355. The MAX3355 chip integrates a charge pump and comparators to
enable a system with an integrated USB OTG dual-role transceiver to
function as an USB OTG dual-role device.
config EXTCON_MAX77693
tristate "Maxim MAX77693 EXTCON Support"
depends on MFD_MAX77693 && INPUT
select IRQ_DOMAIN
select REGMAP_I2C
help
If you say yes here you get support for the MUIC device of
Maxim MAX77693 PMIC. The MAX77693 MUIC is a USB port accessory
detector and switch.
config EXTCON_MAX77843
tristate "Maxim MAX77843 EXTCON Support"
depends on MFD_MAX77843
select IRQ_DOMAIN
select REGMAP_I2C
help
If you say yes here you get support for the MUIC device of
Maxim MAX77843. The MAX77843 MUIC is a USB port accessory
detector add switch.
config EXTCON_MAX8997
tristate "Maxim MAX8997 EXTCON Support"
depends on MFD_MAX8997 && IRQ_DOMAIN
help
If you say yes here you get support for the MUIC device of
Maxim MAX8997 PMIC. The MAX8997 MUIC is a USB port accessory
detector and switch.
config EXTCON_PALMAS
tristate "Palmas USB EXTCON support"
depends on MFD_PALMAS
help
Say Y here to enable support for USB peripheral and USB host
detection by palmas usb.
config EXTCON_PTN5150
tristate "NXP PTN5150 CC LOGIC USB EXTCON support"
depends on I2C && (GPIOLIB || COMPILE_TEST)
depends on USB_ROLE_SWITCH || !USB_ROLE_SWITCH
select REGMAP_I2C
help
Say Y here to enable support for USB peripheral and USB host
detection by NXP PTN5150 CC (Configuration Channel) logic chip.
config EXTCON_QCOM_SPMI_MISC
tristate "Qualcomm USB extcon support"
depends on ARCH_QCOM || COMPILE_TEST
help
Say Y here to enable SPMI PMIC based USB cable detection
support on Qualcomm PMICs such as PM8941.
config EXTCON_RT8973A
tristate "Richtek RT8973A EXTCON support"
depends on I2C
select IRQ_DOMAIN
select REGMAP_I2C
select REGMAP_IRQ
help
If you say yes here you get support for the MUIC device of
Richtek RT8973A. The RT8973A is a USB port accessory detector
and switch that is optimized to protect low voltage system
from abnormal high input voltage (up to 28V).
config EXTCON_SM5502
tristate "Silicon Mitus SM5502/SM5504/SM5703 EXTCON support"
depends on I2C
select IRQ_DOMAIN
select REGMAP_I2C
select REGMAP_IRQ
help
If you say yes here you get support for the MUIC device of
Silicon Mitus SM5502. The SM5502 is a USB port accessory
detector and switch.
config EXTCON_USB_GPIO
tristate "USB GPIO extcon support"
depends on GPIOLIB || COMPILE_TEST
help
Say Y here to enable GPIO based USB cable detection extcon support.
Used typically if GPIO is used for USB ID pin detection.
config EXTCON_USBC_CROS_EC
tristate "ChromeOS Embedded Controller EXTCON support"
depends on CROS_EC
help
Say Y here to enable USB Type C cable detection extcon support when
using Chrome OS EC based USB Type-C ports.
config EXTCON_USBC_TUSB320
tristate "TI TUSB320 USB-C extcon support"
depends on I2C && TYPEC
select REGMAP_I2C
help
Say Y here to enable support for USB Type C cable detection extcon
support using a TUSB320.
endif
|
