/*
* (C) 2001-2004 Dave Jones. <davej@codemonkey.org.uk>
* (C) 2002 Padraig Brady. <padraig@antefacto.com>
*
* Licensed under the terms of the GNU GPL License version 2.
* Based upon datasheets & sample CPUs kindly provided by VIA.
*
* VIA have currently 3 different versions of Longhaul.
* Version 1 (Longhaul) uses the BCR2 MSR at 0x1147.
* It is present only in Samuel 1 (C5A), Samuel 2 (C5B) stepping 0.
* Version 2 of longhaul is the same as v1, but adds voltage scaling.
* Present in Samuel 2 (steppings 1-7 only) (C5B), and Ezra (C5C)
* voltage scaling support has currently been disabled in this driver
* until we have code that gets it right.
* Version 3 of longhaul got renamed to Powersaver and redesigned
* to use the POWERSAVER MSR at 0x110a.
* It is present in Ezra-T (C5M), Nehemiah (C5X) and above.
* It's pretty much the same feature wise to longhaul v2, though
* there is provision for scaling FSB too, but this doesn't work
* too well in practice so we don't even try to use this.
*
* BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/cpufreq.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <asm/msr.h>
#include <asm/timex.h>
#include <asm/io.h>
#include <asm/acpi.h>
#include <linux/acpi.h>
#include <acpi/processor.h>
#include "longhaul.h"
#define PFX "longhaul: "
#define TYPE_LONGHAUL_V1 1
#define TYPE_LONGHAUL_V2 2
#define TYPE_POWERSAVER 3
#define CPU_SAMUEL 1
#define CPU_SAMUEL2 2
#define CPU_EZRA 3
#define CPU_EZRA_T 4
#define CPU_NEHEMIAH 5
#define CPU_NEHEMIAH_C 6
/* Flags */
#define USE_ACPI_C3 (1 << 1)
#define USE_NORTHBRIDGE (1 << 2)
static int cpu_model;
static unsigned int numscales=16;
static unsigned int fsb;
static struct mV_pos *vrm_mV_table;
static unsigned char *mV_vrm_table;
struct f_msr {
unsigned char vrm;
};
static struct f_msr f_msr_table[32];
static unsigned int highest_speed, lowest_speed; /* kHz */
static unsigned int minmult, maxmult;
static int can_scale_voltage;
static struct acpi_processor *pr = NULL;
static struct acpi_processor_cx *cx = NULL;
static u8 longhaul_flags;
/* Module parameters */
static int scale_voltage;
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "longhaul", msg)
/* Clock ratios multiplied by 10 */
static int clock_ratio[32];
static int eblcr_table[32];
static int longhaul_version;
static struct cpufreq_frequency_table *longhaul_table;
#ifdef CONFIG_CPU_FREQ_DEBUG
static char speedbuffer[8];
static char *print_speed(int speed)
{
if (speed < 1000) {
snprintf(speedbuffer, sizeof(speedbuffer),"%dMHz", speed);
return speedbuffer;
}
if (speed%1000 == 0)
snprintf(speedbuffer, sizeof(speedbuffer),
"%dGHz", speed/1000);
else
snprintf(speedbuffer, sizeof(speedbuffer),
"%d.%dGHz", speed/1000, (speed%1000)/100);
return speedbuffer;
}
#endif
static unsigned int calc_speed(int mult)
{
int khz;
khz = (mult/10)*fsb;
if (mult%10)
khz += fsb/2;
khz *= 1000;
return khz;
}
static int longhaul_get_cpu_mult(void)
{
unsigned long invalue=0,lo, hi;
rdmsr (MSR_IA32_EBL_CR_POWERON, lo, hi);
invalue = (lo & (1<<22|1<<23|1<<24|1<<25)) >>22;
if (longhaul_version==TYPE_LONGHAUL_V2 || longhaul_version==TYPE_POWERSAVER) {
if (lo & (1<<27))
invalue+=16;
}
return eblcr_table[invalue];
}
/* For processor with BCR2 MSR */
static void do_longhaul1(unsigned int clock_ratio_index)
{
union msr_bcr2 bcr2;
rdmsrl(MSR_VIA_BCR2, bcr2.val);
/* Enable software clock multiplier */
bcr2.bits.ESOFTBF = 1;
bcr2.bits.CLOCKMUL = clock_ratio_index;
/* Sync to timer tick */
safe_halt();
/* Change frequency on next halt or sleep */
wrmsrl(MSR_VIA_BCR2, bcr2.val);
/* Invoke transition */
ACPI_FLUSH_CPU_CACHE();
halt();
/* Disable software clock multiplier */
local_irq_disable();
rdmsrl(MSR_VIA_BCR2, bcr2.val);
bcr2.bits.ESOFTBF = 0;
wrmsrl(MSR_VIA_BCR2, bcr2.val);
}
/* For processor with Longhaul MSR */
static void do_powersaver(int cx_address, unsigned int clock_ratio_index)
{
union msr_longhaul longhaul;
u32 t;
rdmsrl(MSR_VIA_LONGHAUL, longhaul.val);
longhaul.bits.RevisionKey = longhaul.bits.RevisionID;
longhaul.bits.SoftBusRatio = clock_ratio_index & 0xf;
longhaul.bits.SoftBusRatio4 = (clock_ratio_index & 0x10) >> 4;
longhaul.bits.EnableSoftBusRatio = 1;
if (can_scale_voltage) {
longhaul.bits.SoftVID = f_msr_table[clock_ratio_index].vrm;
longhaul.bits.EnableSoftVID = 1;
}
/* Sync to timer tick */
safe_halt();
/* Change frequency on next halt or sleep */
wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
if (!cx_address) {
ACPI_FLUSH_CPU_CACHE();
/* Invoke C1 */
halt();
} else {
ACPI_FLUSH_CPU_CACHE();
/* Invoke C3 */
inb(cx_address);
/* Dummy op - must do something useless after P_LVL3 read */
t = inl(acpi_fadt.xpm_tmr_blk.address);
}
/* Disable bus ratio bit */
local_irq_disable();
longhaul.bits.RevisionKey = longhaul.bits.RevisionID;
longhaul.bits.EnableSoftBusRatio = 0;
longhaul.bits.EnableSoftBSEL = 0;
longhaul.bits.EnableSoftVID = 0;
wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
}
/**
* longhaul_set_cpu_frequency()
* @clock_ratio_index : bitpattern of the new multiplier.
*
* Sets a new clock ratio.
*/
static void longhaul_setstate(unsigned int clock_ratio_index)
{
int speed, mult;
struct cpufreq_freqs freqs;
static unsigned int old_ratio=-1;
unsigned long flags;
unsigned int pic1_mask, pic2_mask;
if (old_ratio == clock_ratio_index)
return;
old_ratio = clock_ratio_index;
mult = clock_ratio[clock_ratio_index];
if (mult == -1)
return;
speed = calc_speed(mult);
if ((speed > highest_speed) || (speed < lowest_speed))
return;
freqs.old = calc_speed(longhaul_get_cpu_mult());
freqs.new = speed;
freqs.cpu = 0; /* longhaul.c is UP only driver */
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
dprintk ("Setting to FSB:%dMHz Mult:%d.%dx (%s)\n",
fsb, mult/10, mult%10, print_speed(speed/1000));
preempt_disable();
local_irq_save(flags);
pic2_mask = inb(0xA1);
pic1_mask = inb(0x21); /* works on C3. save mask. */
outb(0xFF,0xA1); /* Overkill */
outb(0xFE,0x21); /* TMR0 only */
if (longhaul_flags & USE_NORTHBRIDGE) {
/* Disable AGP and PCI arbiters */
outb(3, 0x22);
} else if ((pr != NULL) && pr->flags.bm_control) {
/* Disable bus master arbitration */
acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1,
ACPI_MTX_DO_NOT_LOCK);
}
switch (longhaul_version) {
/*
* Longhaul v1. (Samuel[C5A] and Samuel2 stepping 0[C5B])
* Software controlled multipliers only.
*
* *NB* Until we get voltage scaling working v1 & v2 are the same code.
* Longhaul v2 appears in Samuel2 Steppings 1->7 [C5b] and Ezra [C5C]
*/
case TYPE_LONGHAUL_V1:
case TYPE_LONGHAUL_V2:
do_longhaul1(clock_ratio_index);
break;
/*
* Longhaul v3 (aka Powersaver). (Ezra-T [C5M] & Nehemiah [C5N])
* We can scale voltage with this too, but that's currently
* disabled until we come up with a decent 'match freq to voltage'
* algorithm.
* When we add voltage scaling, we will also need to do the
* voltage/freq setting in order depending on the direction
* of scaling (like we do in powernow-k7.c)
* Nehemiah can do FSB scaling too, but this has never been proven
* to work in practice.
*/
case TYPE_POWERSAVER:
if (longhaul_flags & USE_ACPI_C3) {
/* Don't allow wakeup */
acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0,
ACPI_MTX_DO_NOT_LOCK);
do_powersaver(cx->address, clock_ratio_index);
} else {
do_powersaver(0, clock_ratio_index);
}
break;
}
if (longhaul_flags & USE_NORTHBRIDGE) {
/* Enable arbiters */
outb(0, 0x22);
} else if ((pr != NULL) && pr->flags.bm_control) {
/* Enable bus master arbitration */
acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0,
ACPI_MTX_DO_NOT_LOCK);
}
outb(pic2_mask,0xA1); /* restore mask */
outb(pic1_mask,0x21);
local_irq_restore(flags);
preempt_enable();
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
}
/*
* Centaur decided to make life a little more tricky.
* Only longhaul v1 is allowed to read EBLCR BSEL[0:1].
* Samuel2 and above have to try and guess what the FSB is.
* We do this by assuming we booted at maximum multiplier, and interpolate
* between that value multiplied by possible FSBs and cpu_mhz which
* was calculated at boot time. Really ugly, but no other way to do this.
*/
#define ROUNDING 0xf
static int guess_fsb(int mult)
{
int speed = cpu_khz / 1000;
int i;
int speeds[] = { 666, 1000, 1333, 2000 };
int f_max, f_min;
for (i = 0; i < 4; i++) {
f_max = ((speeds[i] * mult) + 50) / 100;
f_max += (ROUNDING / 2);
f_min = f_max - ROUNDING;
if ((speed <= f_max) && (speed >= f_min))
return speeds[i] / 10;
}
return 0;
}
static int __init longhaul_get_ranges(void)
{
unsigned int j, k = 0;
int mult;
/* Get current frequency */
mult = longhaul_get_cpu_mult();
if (mult == -1) {
printk(KERN_INFO PFX "Invalid (reserved) multiplier!\n");
return -EINVAL;
}
fsb = guess_fsb(mult);
if (fsb == 0) {
printk(KERN_INFO PFX "Invalid (reserved) FSB!\n");
return -EINVAL;
}
/* Get max multiplier - as we always did.
* Longhaul MSR is usefull only when voltage scaling is enabled.
* C3 is booting at max anyway. */
maxmult = mult;
/* Get min multiplier */
switch (longhaul_version) {
case TYPE_LONGHAUL_V1:
case TYPE_LONGHAUL_V2:
minmult = 30;
break;
case TYPE_POWERSAVER:
/* Ezra-T */
if (cpu_model == CPU_EZRA_T)
minmult = 30;
/* Nehemiah */
else if (cpu_model == CPU_NEHEMIAH)
minmult = 50;
/* Nehemiah C */
else if (cpu_model == CPU_NEHEMIAH_C)
minmult = 40;
break;
}
dprintk ("MinMult:%d.%dx MaxMult:%d.%dx\n",
minmult/10, minmult%10, maxmult/10, maxmult%10);
highest_speed = calc_speed(maxmult);
lowest_speed = calc_speed(minmult);
dprintk ("FSB:%dMHz Lowest speed: %s Highest speed:%s\n", fsb,
print_speed(lowest_speed/1000),
print_speed(highest_speed/1000));
if (lowest_speed == highest_speed) {
printk (KERN_INFO PFX "highestspeed == lowest, aborting.\n");
return -EINVAL;
}
if (lowest_speed > highest_speed) {
printk (KERN_INFO PFX "nonsense! lowest (%d > %d) !\n",
lowest_speed, highest_speed);
return -EINVAL;
}
longhaul_table = kmalloc((numscales + 1) * sizeof(struct cpufreq_frequency_table), GFP_KERNEL);
if(!longhaul_table)
return -ENOMEM;
for (j=0; j < numscales; j++) {
unsigned int ratio;
ratio = clock_ratio[j];
if (ratio == -1)
continue;
if (ratio > maxmult || ratio < minmult)
continue;
longhaul_table[k].frequency = calc_speed(ratio);
longhaul_table[k].index = j;
k++;
}
longhaul_table[k].frequency = CPUFREQ_TABLE_END;
if (!k) {
kfree (longhaul_table);
return -EINVAL;
}
return 0;
}
static void __init longhaul_setup_voltagescaling(void)
{
union msr_longhaul longhaul;
struct mV_pos minvid, maxvid;
unsigned int j, speed, pos, kHz_step, numvscales;
rdmsrl(MSR_VIA_LONGHAUL, longhaul.val);
if (!(longhaul.bits.RevisionID & 1)) {
printk(KERN_INFO PFX "Voltage scaling not supported by CPU.\n");
return;
}
if (!longhaul.bits.VRMRev) {
printk (KERN_INFO PFX "VRM 8.5\n");
vrm_mV_table = &vrm85_mV[0];
mV_vrm_table = &mV_vrm85[0];
} else {
printk (KERN_INFO PFX "Mobile VRM\n");
vrm_mV_table = &mobilevrm_mV[0];
mV_vrm_table = &mV_mobilevrm[0];
}
minvid = vrm_mV_table[longhaul.bits.MinimumVID];
maxvid = vrm_mV_table[longhaul.bits.MaximumVID];
numvscales = maxvid.pos - minvid.pos + 1;
kHz_step = (highest_speed - lowest_speed) / numvscales;
if (minvid.mV == 0 || maxvid.mV == 0 || minvid.mV > maxvid.mV) {
printk (KERN_INFO PFX "Bogus values Min:%d.%03d Max:%d.%03d. "
"Voltage scaling disabled.\n",
minvid.mV/1000, minvid.mV%1000, maxvid.mV/1000, maxvid.mV%1000);
return;
}
if (minvid.mV == maxvid.mV) {
printk (KERN_INFO PFX "Claims to support voltage scaling but min & max are "
"both %d.%03d. Voltage scaling disabled\n",
maxvid.mV/1000, maxvid.mV%1000);
return;
}
printk(KERN_INFO PFX "Max VID=%d.%03d Min VID=%d.%03d, %d possible voltage scales\n",
maxvid.mV/1000, maxvid.mV%1000,
minvid.mV/1000, minvid.mV%1000,
numvscales);
j = 0;
while (longhaul_table[j].frequency != CPUFREQ_TABLE_END) {
speed = longhaul_table[j].frequency;
pos = (speed - lowest_speed) / kHz_step + minvid.pos;
f_msr_table[longhaul_table[j].index].vrm = mV_vrm_table[pos];
j++;
}
can_scale_voltage = 1;
}
static int longhaul_verify(struct cpufreq_policy *policy)
{
return cpufreq_frequency_table_verify(policy, longhaul_table);
}
static int longhaul_target(struct cpufreq_policy *policy,
unsigned int target_freq, unsigned int relation)
{
unsigned int table_index = 0;
unsigned int new_clock_ratio = 0;
if (cpufreq_frequency_table_target(policy, longhaul_table, target_freq, relation, &table_index))
return -EINVAL;
new_clock_ratio = longhaul_table[table_index].index & 0xFF;
longhaul_setstate(new_clock_ratio);
return 0;
}
static unsigned int longhaul_get(unsigned int cpu)
{
if (cpu)
return 0;
return calc_speed(longhaul_get_cpu_mult());
}
static acpi_status longhaul_walk_callback(acpi_handle obj_handle,
u32 nesting_level,
void *context, void **return_value)
{
struct acpi_device *d;
if ( acpi_bus_get_device(obj_handle, &d) ) {
return 0;
}
*return_value = (void *)acpi_driver_data(d);
return 1;
}
/* VIA don't support PM2 reg, but have something similar */
static int enable_arbiter_disable(void)
{
struct pci_dev *dev;
int reg;
u8 pci_cmd;
/* Find PLE133 host bridge */
reg = 0x78;
dev = pci_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8601_0, NULL);
/* Find CLE266 host bridge */
if (dev == NULL) {
reg = 0x76;
dev = pci_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_862X_0, NULL);
/* Find CN400 V-Link host bridge */
if (dev == NULL)
dev = pci_find_device(PCI_VENDOR_ID_VIA, 0x7259, NULL);
}
if (dev != NULL) {
/* Enable access to port 0x22 */
pci_read_config_byte(dev, reg, &pci_cmd);
if ( !(pci_cmd & 1<<7) ) {
pci_cmd |= 1<<7;
pci_write_config_byte(dev, reg, pci_cmd);
}
return 1;
}
return 0;
}
static int __init longhaul_cpu_init(struct cpufreq_policy *policy)
{
struct cpuinfo_x86 *c = cpu_data;
char *cpuname=NULL;
int ret;
/* Check what we have on this motherboard */
switch (c->x86_model) {
case 6:
cpu_model = CPU_SAMUEL;
cpuname = "C3 'Samuel' [C5A]";
longhaul_version = TYPE_LONGHAUL_V1;
memcpy (clock_ratio, samuel1_clock_ratio, sizeof(samuel1_clock_ratio));
memcpy (eblcr_table, samuel1_eblcr, sizeof(samuel1_eblcr));
break;
case 7:
longhaul_version = TYPE_LONGHAUL_V1;
switch (c->x86_mask) {
case 0:
cpu_model = CPU_SAMUEL2;
cpuname = "C3 'Samuel 2' [C5B]";
/* Note, this is not a typo, early Samuel2's had Samuel1 ratios. */
memcpy (clock_ratio, samuel1_clock_ratio, sizeof(samuel1_clock_ratio));
memcpy (eblcr_table, samuel2_eblcr, sizeof(samuel2_eblcr));
break;
case 1 ... 15:
if (c->x86_mask < 8) {
cpu_model = CPU_SAMUEL2;
cpuname = "C3 'Samuel 2' [C5B]";
} else {
cpu_model = CPU_EZRA;
cpuname = "C3 'Ezra' [C5C]";
}
memcpy (clock_ratio, ezra_clock_ratio, sizeof(ezra_clock_ratio));
memcpy (eblcr_table, ezra_eblcr, sizeof(ezra_eblcr));
break;
}
break;
case 8:
cpu_model = CPU_EZRA_T;
cpuname = "C3 'Ezra-T' [C5M]";
longhaul_version = TYPE_POWERSAVER;
numscales=32;
memcpy (clock_ratio, ezrat_clock_ratio, sizeof(ezrat_clock_ratio));
memcpy (eblcr_table, ezrat_eblcr, sizeof(ezrat_eblcr));
break;
case 9:
longhaul_version = TYPE_POWERSAVER;
numscales = 32;
memcpy(clock_ratio,
nehemiah_clock_ratio,
sizeof(nehemiah_clock_ratio));
memcpy(eblcr_table, nehemiah_eblcr, sizeof(nehemiah_eblcr));
switch (c->x86_mask) {
case 0 ... 1:
cpu_model = CPU_NEHEMIAH;
cpuname = "C3 'Nehemiah A' [C5N]";
break;
case 2 ... 4:
cpu_model = CPU_NEHEMIAH;
cpuname = "C3 'Nehemiah B' [C5N]";
break;
case 5 ... 15:
cpu_model = CPU_NEHEMIAH_C;
cpuname = "C3 'Nehemiah C' [C5N]";
break;
}
break;
default:
cpuname = "Unknown";
break;
}
printk (KERN_INFO PFX "VIA %s CPU detected. ", cpuname);
switch (longhaul_version) {
case TYPE_LONGHAUL_V1:
case TYPE_LONGHAUL_V2:
printk ("Longhaul v%d supported.\n", longhaul_version);
break;
case TYPE_POWERSAVER:
printk ("Powersaver supported.\n");
break;
};
/* Find ACPI data for processor */
acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX,
&longhaul_walk_callback, NULL, (void *)&pr);
/* Check ACPI support for C3 state */
if ((pr != NULL) && (longhaul_version == TYPE_POWERSAVER)) {
cx = &pr->power.states[ACPI_STATE_C3];
if (cx->address > 0 && cx->latency <= 1000) {
longhaul_flags |= USE_ACPI_C3;
goto print_support_type;
}
}
/* Check if northbridge is friendly */
if (enable_arbiter_disable()) {
longhaul_flags |= USE_NORTHBRIDGE;
goto print_support_type;
}
/* No ACPI C3 or we can't use it */
/* Check ACPI support for bus master arbiter disable */
if ((pr == NULL) || !(pr->flags.bm_control)) {
printk(KERN_ERR PFX
"No ACPI support. Unsupported northbridge.\n");
return -ENODEV;
}
print_support_type:
if (!(longhaul_flags & USE_NORTHBRIDGE)) {
printk (KERN_INFO PFX "Using ACPI support.\n");
} else {
printk (KERN_INFO PFX "Using northbridge support.\n");
}
ret = longhaul_get_ranges();
if (ret != 0)
return ret;
if ((longhaul_version==TYPE_LONGHAUL_V2 || longhaul_version==TYPE_POWERSAVER) &&
(scale_voltage != 0))
longhaul_setup_voltagescaling();
policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
policy->cpuinfo.transition_latency = 200000; /* nsec */
policy->cur = calc_speed(longhaul_get_cpu_mult());
ret = cpufreq_frequency_table_cpuinfo(policy, longhaul_table);
if (ret)
return ret;
cpufreq_frequency_table_get_attr(longhaul_table, policy->cpu);
return 0;
}
static int __devexit longhaul_cpu_exit(struct cpufreq_policy *policy)
{
cpufreq_frequency_table_put_attr(policy->cpu);
return 0;
}
static struct freq_attr* longhaul_attr[] = {
&cpufreq_freq_attr_scaling_available_freqs,
NULL,
};
static struct cpufreq_driver longhaul_driver = {
.verify = longhaul_verify,
.target = longhaul_target,
.get = longhaul_get,
.init = longhaul_cpu_init,
.exit = __devexit_p(longhaul_cpu_exit),
.name = "longhaul",
.owner = THIS_MODULE,
.attr = longhaul_attr,
};
static int __init longhaul_init(void)
{
struct cpuinfo_x86 *c = cpu_data;
if (c->x86_vendor != X86_VENDOR_CENTAUR || c->x86 != 6)
return -ENODEV;
#ifdef CONFIG_SMP
if (num_online_cpus() > 1) {
printk(KERN_ERR PFX "More than 1 CPU detected, longhaul disabled.\n");
return -ENODEV;
}
#endif
#ifdef CONFIG_X86_IO_APIC
if (cpu_has_apic) {
printk(KERN_ERR PFX "APIC detected. Longhaul is currently broken in this configuration.\n");
return -ENODEV;
}
#endif
switch (c->x86_model) {
case 6 ... 9:
return cpufreq_register_driver(&longhaul_driver);
case 10:
printk(KERN_ERR PFX "Use acpi-cpufreq driver for VIA C7\n");
default:
;;
}
return -ENODEV;
}
static void __exit longhaul_exit(void)
{
int i;
for (i=0; i < numscales; i++) {
if (clock_ratio[i] == maxmult) {
longhaul_setstate(i);
break;
}
}
cpufreq_unregister_driver(&longhaul_driver);
kfree(longhaul_table);
}
module_param (scale_voltage, int, 0644);
MODULE_PARM_DESC(scale_voltage, "Scale voltage of processor");
MODULE_AUTHOR ("Dave Jones <davej@codemonkey.org.uk>");
MODULE_DESCRIPTION ("Longhaul driver for VIA Cyrix processors.");
MODULE_LICENSE ("GPL");
late_initcall(longhaul_init);
module_exit(longhaul_exit);