// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include "px30.dtsi"
/ {
model = "Rockchip PX30 EVB";
compatible = "rockchip,px30-evb", "rockchip,px30";
chosen {
stdout-path = "serial5:115200n8";
};
adc-keys {
compatible = "adc-keys";
io-channels = <&saradc 2>;
io-channel-names = "buttons";
keyup-threshold-microvolt = <1800000>;
poll-interval = <100>;
esc-key {
label = "esc";
linux,code = <KEY_ESC>;
press-threshold-microvolt = <1310000>;
};
home-key {
label = "home";
linux,code = <KEY_HOME>;
press-threshold-microvolt = <624000>;
};
menu-key {
label = "menu";
linux,code = <KEY_MENU>;
press-threshold-microvolt = <987000>;
};
vol-down-key {
label = "volume down";
linux,code = <KEY_VOLUMEDOWN>;
press-threshold-microvolt = <300000>;
};
vol-up-key {
label = "volume up";
linux,code = <KEY_VOLUMEUP>;
press-threshold-microvolt = <17000>;
};
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm1 0 25000 0>;
power-supply = <&vcc3v3_lcd>;
};
emmc_pwrseq: emmc-pwrseq {
compatible = "mmc-pwrseq-emmc";
pinctrl-0 = <&emmc_reset>;
pinctrl-names = "default";
reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>;
};
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
pinctrl-0 = <&wifi_enable_h>;
/*
* On the module itself this is one of these (depending
* on the actual card populated):
* - SDIO_RESET_L_WL_REG_ON
* - PDN (power down when low)
*/
reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO3_A4 */
};
vcc5v0_sys: vccsys {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
};
&cpu0 {
cpu-supply = <&vdd_arm>;
};
&cpu1 {
cpu-supply = <&vdd_arm>;
};
&cpu2 {
cpu-supply = <&vdd_arm>;
};
&cpu3 {
cpu-supply = <&vdd_arm>;
};
&display_subsystem {
status = "okay";
};
&emmc {
bus-width = <8>;
cap-mmc-highspeed;
mmc-hs200-1_8v;
non-removable;
mmc-pwrseq = <&emmc_pwrseq>;
vmmc-supply = <&vcc_3v0>;
vqmmc-supply = <&vccio_flash>;
status = "okay";
};
&gmac {
clock_in_out = "output";
phy-supply = <&vcc_rmii>;
snps,reset-gpio = <&gpio2 13 GPIO_ACTIVE_LOW>;
snps,reset-active-low;
snps,reset-delays-us = <0 50000 50000>;
status = "okay";
};
&i2c0 {
status = "okay";
rk809: pmic@20 {
compatible = "rockchip,rk809";
reg = <0x20>;
interrupt-parent = <&gpio0>;
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int>;
rockchip,system-power-controller;
wakeup-source;
#clock-cells = <0>;
clock-output-names = "xin32k";
vcc1-supply = <&vcc5v0_sys>;
vcc2-supply = <&vcc5v0_sys>;
vcc3-supply = <&vcc5v0_sys>;
vcc4-supply = <&vcc5v0_sys>;
vcc5-supply = <&vcc3v3_sys>;
vcc6-supply = <&vcc3v3_sys>;
vcc7-supply = <&vcc3v3_sys>;
vcc8-supply = <&vcc3v3_sys>;
vcc9-supply = <&vcc5v0_sys>;
regulators {
vdd_log: DCDC_REG1 {
regulator-name = "vdd_log";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <950000>;
};
};
vdd_arm: DCDC_REG2 {
regulator-name = "vdd_arm";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <950000>;
};
};
vcc_ddr: DCDC_REG3 {
regulator-name = "vcc_ddr";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc_3v0: vcc_rmii: DCDC_REG4 {
regulator-name = "vcc_3v0";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3000000>;
};
};
vcc3v3_sys: DCDC_REG5 {
regulator-name = "vcc3v3_sys";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcc_1v0: LDO_REG1 {
regulator-name = "vcc_1v0";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1000000>;
};
};
vcc_1v8: vccio_flash: vccio_sdio: LDO_REG2 {
regulator-name = "vcc_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vdd_1v0: LDO_REG3 {
regulator-name = "vdd_1v0";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1000000>;
};
};
vcc3v0_pmu: LDO_REG4 {
regulator-name = "vcc3v0_pmu";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3000000>;
};
};
vccio_sd: LDO_REG5 {
regulator-name = "vccio_sd";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcc_sd: LDO_REG6 {
regulator-name = "vcc_sd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcc2v8_dvp: LDO_REG7 {
regulator-name = "vcc2v8_dvp";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <2800000>;
};
};
vcc1v8_dvp: LDO_REG8 {
regulator-name = "vcc1v8_dvp";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vcc1v5_dvp: LDO_REG9 {
regulator-name = "vcc1v5_dvp";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <1500000>;
};
};
vcc3v3_lcd: SWITCH_REG1 {
regulator-name = "vcc3v3_lcd";
regulator-boot-on;
};
vcc5v0_host: SWITCH_REG2 {
regulator-name = "vcc5v0_host";
regulator-always-on;
regulator-boot-on;
};
};
};
};
&i2c1 {
status = "okay";
sensor@d {
compatible = "asahi-kasei,ak8963";
reg = <0x0d>;
gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
vdd-supply = <&vcc3v0_pmu>;
mount-matrix = "1", /* x0 */
"0", /* y0 */
"0", /* z0 */
"0", /* x1 */
"1", /* y1 */
"0", /* z1 */
"0", /* x2 */
"0", /* y2 */
"1"; /* z2 */
};
touchscreen@14 {
compatible = "goodix,gt1151";
reg = <0x14>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
irq-gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
reset-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
VDDIO-supply = <&vcc3v3_lcd>;
};
sensor@4c {
compatible = "fsl,mma7660";
reg = <0x4c>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PB7 IRQ_TYPE_LEVEL_LOW>;
};
};
&i2s1_2ch {
status = "okay";
};
&io_domains {
status = "okay";
vccio1-supply = <&vccio_sdio>;
vccio2-supply = <&vccio_sd>;
vccio3-supply = <&vcc_3v0>;
vccio4-supply = <&vcc3v0_pmu>;
vccio5-supply = <&vcc_3v0>;
vccio6-supply = <&vccio_flash>;
};
&pinctrl {
headphone {
hp_det: hp-det {
rockchip,pins =
<2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
emmc {
emmc_reset: emmc-reset {
rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pmic {
pmic_int: pmic_int {
rockchip,pins =
<0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
};
soc_slppin_gpio: soc_slppin_gpio {
rockchip,pins =
<0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
};
soc_slppin_slp: soc_slppin_slp {
rockchip,pins =
<0 RK_PA4 1 &pcfg_pull_none>;
};
soc_slppin_rst: soc_slppin_rst {
rockchip,pins =
<0 RK_PA4 2 &pcfg_pull_none>;
};
};
sdio-pwrseq {
wifi_enable_h: wifi-enable-h {
rockchip,pins =
<0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&pmu_io_domains {
status = "okay";
pmuio1-supply = <&vcc3v0_pmu>;
pmuio2-supply = <&vcc3v0_pmu>;
};
&pwm1 {
status = "okay";
};
&saradc {
vref-supply = <&vcc_1v8>;
status = "okay";
};
&sdmmc {
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
card-detect-delay = <800>;
sd-uhs-sdr12;
sd-uhs-sdr25;
sd-uhs-sdr50;
sd-uhs-sdr104;
vmmc-supply = <&vcc_sd>;
vqmmc-supply = <&vccio_sd>;
status = "okay";
};
&sdio {
bus-width = <4>;
cap-sd-highspeed;
keep-power-in-suspend;
non-removable;
mmc-pwrseq = <&sdio_pwrseq>;
sd-uhs-sdr104;
status = "okay";
};
&u2phy {
status = "okay";
u2phy_host: host-port {
status = "okay";
};
u2phy_otg: otg-port {
status = "okay";
};
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_xfer &uart1_cts>;
status = "okay";
};
&uart5 {
status = "okay";
};
&usb20_otg {
status = "okay";
};
&usb_host0_ehci {
status = "okay";
};
&usb_host0_ohci {
status = "okay";
};
&vopb {
status = "okay";
};
&vopb_mmu {
status = "okay";
};
&vopl {
status = "okay";
};
&vopl_mmu {
status = "okay";
};
