/*
* linux/arch/arm/mm/proc-mohawk.S: MMU functions for Marvell PJ1 core
*
* PJ1 (codename Mohawk) is a hybrid of the xscale3 and Marvell's own core.
*
* Heavily based on proc-arm926.S and proc-xsc3.S
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/hwcap.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/ptrace.h>
#include "proc-macros.S"
/*
* This is the maximum size of an area which will be flushed. If the
* area is larger than this, then we flush the whole cache.
*/
#define CACHE_DLIMIT 32768
/*
* The cache line size of the L1 D cache.
*/
#define CACHE_DLINESIZE 32
/*
* cpu_mohawk_proc_init()
*/
ENTRY(cpu_mohawk_proc_init)
mov pc, lr
/*
* cpu_mohawk_proc_fin()
*/
ENTRY(cpu_mohawk_proc_fin)
stmfd sp!, {lr}
mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
msr cpsr_c, ip
bl mohawk_flush_kern_cache_all
mrc p15, 0, r0, c1, c0, 0 @ ctrl register
bic r0, r0, #0x1800 @ ...iz...........
bic r0, r0, #0x0006 @ .............ca.
mcr p15, 0, r0, c1, c0, 0 @ disable caches
ldmfd sp!, {pc}
/*
* cpu_mohawk_reset(loc)
*
* Perform a soft reset of the system. Put the CPU into the
* same state as it would be if it had been reset, and branch
* to what would be the reset vector.
*
* loc: location to jump to for soft reset
*
* (same as arm926)
*/
.align 5
ENTRY(cpu_mohawk_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
mrc p15, 0, ip, c1, c0, 0 @ ctrl register
bic ip, ip, #0x0007 @ .............cam
bic ip, ip, #0x1100 @ ...i...s........
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
mov pc, r0
/*
* cpu_mohawk_do_idle()
*
* Called with IRQs disabled
*/
.align 5
ENTRY(cpu_mohawk_do_idle)
mov r0, #0
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
mcr p15, 0, r0, c7, c0, 4 @ wait for interrupt
mov pc, lr
/*
* flush_user_cache_all()
*
* Clean and invalidate all cache entries in a particular
* address space.
*/
ENTRY(mohawk_flush_user_cache_all)
/* FALLTHROUGH */
/*
* flush_kern_cache_all()
*
* Clean and invalidate the entire cache.
*/
ENTRY(mohawk_flush_kern_cache_all)
mov r2, #VM_EXEC
mov ip, #0
__flush_whole_cache:
mcr p15, 0, ip, c7, c14, 0 @ clean & invalidate all D cache
tst r2, #VM_EXEC
mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
mcrne p15, 0, ip, c7, c10, 0 @ drain write buffer
mov pc, lr
/*
* flush_user_cache_range(start, end, flags)
*
* Clean and invalidate a range of cache entries in the
* specified address range.
*
* - start - start address (inclusive)
* - end - end address (exclusive)
* - flags - vm_flags describing address space
*
* (same as arm926)
*/
ENTRY(mohawk_flush_user_cache_range)
mov ip, #0
sub r3, r1, r0 @ calculate total size
cmp r3, #CACHE_DLIMIT
bgt __flush_whole_cache
1: tst r2, #VM_EXEC
mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
add r0, r0, #CACHE_DLINESIZE
mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1
blo 1b
tst r2, #VM_EXEC
mcrne p15, 0, ip, c7, c10, 4 @ drain WB
mov pc, lr
/*
* coherent_kern_range(start, end)
*
* Ensure coherency between the Icache and the Dcache in the
* region described by start, end. If you have non-snooping
* Harvard caches, you need to implement this function.
*
* - start - virtual start address
* - end - virtual end address
*/
ENTRY(mohawk_coherent_kern_range)
/* FALLTHROUGH */
/*
* coherent_user_range(start, end)
*
* Ensure coherency between the Icache and the Dcache in the
* region described by start, end. If you have non-snooping
* Harvard caches, you need to implement this function.
*
* - start - virtual start address
* - end - virtual end address
*
* (same as arm926)
*/
ENTRY(mohawk_coherent_user_range)
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1
blo 1b
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
/*
* flush_kern_dcache_area(void *addr, size_t size)
*
* Ensure no D cache aliasing occurs, either with itself or
* the I cache
*
* - addr - kernel address
* - size - region size
*/
ENTRY(mohawk_flush_kern_dcache_area)
add r1, r0, r1
1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1
blo 1b
mov r0, #0
mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
/*
* dma_inv_range(start, end)
*
* Invalidate (discard) the specified virtual address range.
* May not write back any entries. If 'start' or 'end'
* are not cache line aligned, those lines must be written
* back.
*
* - start - virtual start address
* - end - virtual end address
*
* (same as v4wb)
*/
ENTRY(mohawk_dma_inv_range)
tst r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
tst r1, #CACHE_DLINESIZE - 1
mcrne p15, 0, r1, c7, c10, 1 @ clean D entry
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1
blo 1b
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
/*
* dma_clean_range(start, end)
*
* Clean the specified virtual address range.
*
* - start - virtual start address
* - end - virtual end address
*
* (same as v4wb)
*/
ENTRY(mohawk_dma_clean_range)
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1
blo 1b
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
/*
* dma_flush_range(start, end)
*
* Clean and invalidate the specified virtual address range.
*
* - start - virtual start address
* - end - virtual end address
*/
ENTRY(mohawk_dma_flush_range)
bic r0, r0, #CACHE_DLINESIZE - 1
1:
mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1
blo 1b
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
ENTRY(mohawk_cache_fns)
.long mohawk_flush_kern_cache_all
.long mohawk_flush_user_cache_all
.long mohawk_flush_user_cache_range
.long mohawk_coherent_kern_range
.long mohawk_coherent_user_range
.long mohawk_flush_kern_dcache_area
.long mohawk_dma_inv_range
.long mohawk_dma_clean_range
.long mohawk_dma_flush_range
ENTRY(cpu_mohawk_dcache_clean_area)
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE
subs r1, r1, #CACHE_DLINESIZE
bhi 1b
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
/*
* cpu_mohawk_switch_mm(pgd)
*
* Set the translation base pointer to be as described by pgd.
*
* pgd: new page tables
*/
.align 5
ENTRY(cpu_mohawk_switch_mm)
mov ip, #0
mcr p15, 0, ip, c7, c14, 0 @ clean & invalidate all D cache
mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
mcr p15, 0, ip, c7, c10, 4 @ drain WB
orr r0, r0, #0x18 @ cache the page table in L2
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
mov pc, lr
/*
* cpu_mohawk_set_pte_ext(ptep, pte, ext)
*
* Set a PTE and flush it out
*/
.align 5
ENTRY(cpu_mohawk_set_pte_ext)
armv3_set_pte_ext
mov r0, r0
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
__INIT
.type __mohawk_setup, #function
__mohawk_setup:
mov r0, #0
mcr p15, 0, r0, c7, c7 @ invalidate I,D caches
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs
orr r4, r4, #0x18 @ cache the page table in L2
mcr p15, 0, r4, c2, c0, 0 @ load page table pointer
mov r0, #0 @ don't allow CP access
mcr p15, 0, r0, c15, c1, 0 @ write CP access register
adr r5, mohawk_crval
ldmia r5, {r5, r6}
mrc p15, 0, r0, c1, c0 @ get control register
bic r0, r0, r5
orr r0, r0, r6
mov pc, lr
.size __mohawk_setup, . - __mohawk_setup
/*
* R
* .RVI ZFRS BLDP WCAM
* .011 1001 ..00 0101
*
*/
.type mohawk_crval, #object
mohawk_crval:
crval clear=0x00007f3f, mmuset=0x00003905, ucset=0x00001134
__INITDATA
/*
* Purpose : Function pointers used to access above functions - all calls
* come through these
*/
.type mohawk_processor_functions, #object
mohawk_processor_functions:
.word v5t_early_abort
.word legacy_pabort
.word cpu_mohawk_proc_init
.word cpu_mohawk_proc_fin
.word cpu_mohawk_reset
.word cpu_mohawk_do_idle
.word cpu_mohawk_dcache_clean_area
.word cpu_mohawk_switch_mm
.word cpu_mohawk_set_pte_ext
.size mohawk_processor_functions, . - mohawk_processor_functions
.section ".rodata"
.type cpu_arch_name, #object
cpu_arch_name:
.asciz "armv5te"
.size cpu_arch_name, . - cpu_arch_name
.type cpu_elf_name, #object
cpu_elf_name:
.asciz "v5"
.size cpu_elf_name, . - cpu_elf_name
.type cpu_mohawk_name, #object
cpu_mohawk_name:
.asciz "Marvell 88SV331x"
.size cpu_mohawk_name, . - cpu_mohawk_name
.align
.section ".proc.info.init", #alloc, #execinstr
.type __88sv331x_proc_info,#object
__88sv331x_proc_info:
.long 0x56158000 @ Marvell 88SV331x (MOHAWK)
.long 0xfffff000
.long PMD_TYPE_SECT | \
PMD_SECT_BUFFERABLE | \
PMD_SECT_CACHEABLE | \
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
.long PMD_TYPE_SECT | \
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
b __mohawk_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
.long cpu_mohawk_name
.long mohawk_processor_functions
.long v4wbi_tlb_fns
.long v4wb_user_fns
.long mohawk_cache_fns
.size __88sv331x_proc_info, . - __88sv331x_proc_info
