/*
* OMAP4 PRM instance functions
*
* Copyright (C) 2009 Nokia Corporation
* Copyright (C) 2011 Texas Instruments, Inc.
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/io.h>
#include "iomap.h"
#include "common.h"
#include "prcm-common.h"
#include "prm44xx.h"
#include "prm54xx.h"
#include "prm7xx.h"
#include "prminst44xx.h"
#include "prm-regbits-44xx.h"
#include "prcm44xx.h"
#include "prcm43xx.h"
#include "prcm_mpu44xx.h"
#include "soc.h"
static void __iomem *_prm_bases[OMAP4_MAX_PRCM_PARTITIONS];
/**
* omap_prm_base_init - Populates the prm partitions
*
* Populates the base addresses of the _prm_bases
* array used for read/write of prm module registers.
*/
void omap_prm_base_init(void)
{
_prm_bases[OMAP4430_PRM_PARTITION] = prm_base;
_prm_bases[OMAP4430_PRCM_MPU_PARTITION] = prcm_mpu_base;
}
/* Read a register in a PRM instance */
u32 omap4_prminst_read_inst_reg(u8 part, s16 inst, u16 idx)
{
BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
part == OMAP4430_INVALID_PRCM_PARTITION ||
!_prm_bases[part]);
return readl_relaxed(_prm_bases[part] + inst + idx);
}
/* Write into a register in a PRM instance */
void omap4_prminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx)
{
BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
part == OMAP4430_INVALID_PRCM_PARTITION ||
!_prm_bases[part]);
writel_relaxed(val, _prm_bases[part] + inst + idx);
}
/* Read-modify-write a register in PRM. Caller must lock */
u32 omap4_prminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, s16 inst,
u16 idx)
{
u32 v;
v = omap4_prminst_read_inst_reg(part, inst, idx);
v &= ~mask;
v |= bits;
omap4_prminst_write_inst_reg(v, part, inst, idx);
return v;
}
/*
* Address offset (in bytes) between the reset control and the reset
* status registers: 4 bytes on OMAP4
*/
#define OMAP4_RST_CTRL_ST_OFFSET 4
/**
* omap4_prminst_is_hardreset_asserted - read the HW reset line state of
* submodules contained in the hwmod module
* @rstctrl_reg: RM_RSTCTRL register address for this module
* @shift: register bit shift corresponding to the reset line to check
*
* Returns 1 if the (sub)module hardreset line is currently asserted,
* 0 if the (sub)module hardreset line is not currently asserted, or
* -EINVAL upon parameter error.
*/
int omap4_prminst_is_hardreset_asserted(u8 shift, u8 part, s16 inst,
u16 rstctrl_offs)
{
u32 v;
v = omap4_prminst_read_inst_reg(part, inst, rstctrl_offs);
v &= 1 << shift;
v >>= shift;
return v;
}
/**
* omap4_prminst_assert_hardreset - assert the HW reset line of a submodule
* @rstctrl_reg: RM_RSTCTRL register address for this module
* @shift: register bit shift corresponding to the reset line to assert
*
* Some IPs like dsp, ipu or iva contain processors that require an HW
* reset line to be asserted / deasserted in order to fully enable the
* IP. These modules may have multiple hard-reset lines that reset
* different 'submodules' inside the IP block. This function will
* place the submodule into reset. Returns 0 upon success or -EINVAL
* upon an argument error.
*/
int omap4_prminst_assert_hardreset(u8 shift, u8 part, s16 inst,
u16 rstctrl_offs)
{
u32 mask = 1 << shift;
omap4_prminst_rmw_inst_reg_bits(mask, mask, part, inst, rstctrl_offs);
return 0;
}
/**
* omap4_prminst_deassert_hardreset - deassert a submodule hardreset line and
* wait
* @rstctrl_reg: RM_RSTCTRL register address for this module
* @shift: register bit shift corresponding to the reset line to deassert
*
* Some IPs like dsp, ipu or iva contain processors that require an HW
* reset line to be asserted / deasserted in order to fully enable the
* IP. These modules may have multiple hard-reset lines that reset
* different 'submodules' inside the IP block. This function will
* take the submodule out of reset and wait until the PRCM indicates
* that the reset has completed before returning. Returns 0 upon success or
* -EINVAL upon an argument error, -EEXIST if the submodule was already out
* of reset, or -EBUSY if the submodule did not exit reset promptly.
*/
int omap4_prminst_deassert_hardreset(u8 shift, u8 part, s16 inst,
u16 rstctrl_offs)
{
int c;
u32 mask = 1 << shift;
u16 rstst_offs = rstctrl_offs + OMAP4_RST_CTRL_ST_OFFSET;
/* Check the current status to avoid de-asserting the line twice */
if (omap4_prminst_is_hardreset_asserted(shift, part, inst,
rstctrl_offs) == 0)
return -EEXIST;
/* Clear the reset status by writing 1 to the status bit */
omap4_prminst_rmw_inst_reg_bits(0xffffffff, mask, part, inst,
rstst_offs);
/* de-assert the reset control line */
omap4_prminst_rmw_inst_reg_bits(mask, 0, part, inst, rstctrl_offs);
/* wait the status to be set */
omap_test_timeout(omap4_prminst_is_hardreset_asserted(shift, part, inst,
rstst_offs),
MAX_MODULE_HARDRESET_WAIT, c);
return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
}
void omap4_prminst_global_warm_sw_reset(void)
{
u32 v;
s16 dev_inst;
if (cpu_is_omap44xx())
dev_inst = OMAP4430_PRM_DEVICE_INST;
else if (soc_is_omap54xx())
dev_inst = OMAP54XX_PRM_DEVICE_INST;
else if (soc_is_dra7xx())
dev_inst = DRA7XX_PRM_DEVICE_INST;
else if (soc_is_am43xx())
dev_inst = AM43XX_PRM_DEVICE_INST;
else
return;
v = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION, dev_inst,
OMAP4_PRM_RSTCTRL_OFFSET);
v |= OMAP4430_RST_GLOBAL_WARM_SW_MASK;
omap4_prminst_write_inst_reg(v, OMAP4430_PRM_PARTITION,
dev_inst,
OMAP4_PRM_RSTCTRL_OFFSET);
/* OCP barrier */
v = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
dev_inst,
OMAP4_PRM_RSTCTRL_OFFSET);
}
