if ARCH_AT91
config HAVE_AT91_DATAFLASH_CARD
bool
config HAVE_AT91_DBGU0
bool
config HAVE_AT91_DBGU1
bool
config AT91_SAM9_ALT_RESET
bool
default !ARCH_AT91X40
config AT91_SAM9G45_RESET
bool
default !ARCH_AT91X40
config SOC_AT91SAM9
bool
select GENERIC_CLOCKEVENTS
select CPU_ARM926T
menu "Atmel AT91 System-on-Chip"
comment "Atmel AT91 Processor"
config SOC_AT91SAM9
bool
select CPU_ARM926T
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
select AT91_SAM9_TIME
select AT91_SAM9_SMC
config SOC_AT91RM9200
bool "AT91RM9200"
select CPU_ARM920T
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
select GENERIC_CLOCKEVENTS
select HAVE_AT91_DBGU0
config SOC_AT91SAM9260
bool "AT91SAM9260, AT91SAM9XE or AT91SAM9G20"
select SOC_AT91SAM9
select HAVE_AT91_DBGU0
select HAVE_NET_MACB
help
Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE
or AT91SAM9G20 SoC.
config SOC_AT91SAM9261
bool "AT91SAM9261 or AT91SAM9G10"
select SOC_AT91SAM9
select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
help
Select this if you are using one of Atmel's AT91SAM9261 or AT91SAM9G10 SoC.
config SOC_AT91SAM9263
bool "AT91SAM9263"
select SOC_AT91SAM9
select HAVE_AT91_DBGU1
select HAVE_FB_ATMEL
select HAVE_NET_MACB
config SOC_AT91SAM9RL
bool "AT91SAM9RL"
select SOC_AT91SAM9
select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
config SOC_AT91SAM9G45
bool "AT91SAM9G45 or AT91SAM9M10 families"
select SOC_AT91SAM9
select HAVE_AT91_DBGU1
select HAVE_FB_ATMEL
select HAVE_NET_MACB
help
Select this if you are using one of Atmel's AT91SAM9G45 family SoC.
This support covers AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
config SOC_AT91SAM9X5
bool "AT91SAM9x5 family"
select SOC_AT91SAM9
select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
select HAVE_NET_MACB
help
Select this if you are using one of Atmel's AT91SAM9x5 family SoC.
This means that your SAM9 name finishes with a '5' (except if it is
AT91SAM9G45!).
This support covers AT91SAM9G15, AT91SAM9G25, AT91SAM9X25, AT91SAM9G35
and AT91SAM9X35.
config SOC_AT91SAM9N12
bool "AT91SAM9N12 family"
select SOC_AT91SAM9
select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
help
Select this if you are using Atmel's AT91SAM9N12 SoC.
choice
prompt "Atmel AT91 Processor Devices for non DT boards"
config ARCH_AT91_NONE
bool "None"
config ARCH_AT91RM9200
bool "AT91RM9200"
select SOC_AT91RM9200
config ARCH_AT91SAM9260
bool "AT91SAM9260 or AT91SAM9XE"
select SOC_AT91SAM9260
config ARCH_AT91SAM9261
bool "AT91SAM9261"
select SOC_AT91SAM9261
config ARCH_AT91SAM9G10
bool "AT91SAM9G10"
select SOC_AT91SAM9261
config ARCH_AT91SAM9263
bool "AT91SAM9263"
select SOC_AT91SAM9263
config ARCH_AT91SAM9RL
bool "AT91SAM9RL"
select SOC_AT91SAM9RL
config ARCH_AT91SAM9G20
bool "AT91SAM9G20"
select SOC_AT91SAM9260
config ARCH_AT91SAM9G45
bool "AT91SAM9G45"
select SOC_AT91SAM9G45
config ARCH_AT91X40
bool "AT91x40"
depends on !MMU
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
select ARCH_USES_GETTIMEOFFSET
endchoice
config AT91_PMC_UNIT
bool
default !ARCH_AT91X40
# ----------------------------------------------------------
if ARCH_AT91RM9200
comment "AT91RM9200 Board Type"
config MACH_ONEARM
bool "Ajeco 1ARM Single Board Computer"
help
Select this if you are using Ajeco's 1ARM Single Board Computer.
<http://www.ajeco.fi/>
config ARCH_AT91RM9200DK
bool "Atmel AT91RM9200-DK Development board"
select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using Atmel's AT91RM9200-DK Development board.
(Discontinued)
config MACH_AT91RM9200EK
bool "Atmel AT91RM9200-EK Evaluation Kit"
select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
config MACH_CSB337
bool "Cogent CSB337"
help
Select this if you are using Cogent's CSB337 board.
<http://www.cogcomp.com/csb_csb337.htm>
config MACH_CSB637
bool "Cogent CSB637"
help
Select this if you are using Cogent's CSB637 board.
<http://www.cogcomp.com/csb_csb637.htm>
config MACH_CARMEVA
bool "Conitec ARM&EVA"
help
Select this if you are using Conitec's AT91RM9200-MCU-Module.
<http://www.conitec.net/english/linuxboard.php>
config MACH_ATEB9200
bool "Embest ATEB9200"
help
Select this if you are using Embest's ATEB9200 board.
<http://www.embedinfo.com/english/product/ATEB9200.asp>
config MACH_KB9200
bool "KwikByte KB920x"
help
Select this if you are using KwikByte's KB920x board.
<http://www.kwikbyte.com/KB9202.html>
config MACH_PICOTUX2XX
bool "picotux 200"
help
Select this if you are using a picotux 200.
<http://www.picotux.com/>
config MACH_KAFA
bool "Sperry-Sun KAFA board"
help
Select this if you are using Sperry-Sun's KAFA board.
config MACH_ECBAT91
bool "emQbit ECB_AT91 SBC"
select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using emQbit's ECB_AT91 board.
<http://wiki.emqbit.com/free-ecb-at91>
config MACH_YL9200
bool "ucDragon YL-9200"
help
Select this if you are using the ucDragon YL-9200 board.
config MACH_CPUAT91
bool "Eukrea CPUAT91"
help
Select this if you are using the Eukrea Electromatique's
CPUAT91 board <http://www.eukrea.com/>.
config MACH_ECO920
bool "eco920"
help
Select this if you are using the eco920 board
config MACH_RSI_EWS
bool "RSI Embedded Webserver"
depends on ARCH_AT91RM9200
help
Select this if you are using RSIs EWS board.
endif
# ----------------------------------------------------------
if ARCH_AT91SAM9260
comment "AT91SAM9260 Variants"
comment "AT91SAM9260 / AT91SAM9XE Board Type"
config MACH_AT91SAM9260EK
bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
config MACH_CAM60
bool "KwikByte KB9260 (CAM60) board"
help
Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260.
<http://www.kwikbyte.com/KB9260.html>
config MACH_SAM9_L9260
bool "Olimex SAM9-L9260 board"
select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
<http://www.olimex.com/dev/sam9-L9260.html>
config MACH_AFEB9260
bool "Custom afeb9260 board v1"
help
Select this if you are using custom afeb9260 board based on
open hardware design. Select this for revision 1 of the board.
<svn://194.85.238.22/home/users/george/svn/arm9eb>
<http://groups.google.com/group/arm9fpga-evolution-board>
config MACH_USB_A9260
bool "CALAO USB-A9260"
help
Select this if you are using a Calao Systems USB-A9260.
<http://www.calao-systems.com>
config MACH_QIL_A9260
bool "CALAO QIL-A9260 board"
help
Select this if you are using a Calao Systems QIL-A9260 Board.
<http://www.calao-systems.com>
config MACH_CPU9260
bool "Eukrea CPU9260 board"
help
Select this if you are using a Eukrea Electromatique's
CPU9260 Board <http://www.eukrea.com/>
config MACH_FLEXIBITY
bool "Flexibity Connect board"
help
Select this if you are using Flexibity Connect board
<http://www.flexibity.com>
endif
# ----------------------------------------------------------
if ARCH_AT91SAM9261
comment "AT91SAM9261 Board Type"
config MACH_AT91SAM9261EK
bool "Atmel AT91SAM9261-EK Evaluation Kit"
select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
endif
# ----------------------------------------------------------
if ARCH_AT91SAM9G10
comment "AT91SAM9G10 Board Type"
config MACH_AT91SAM9G10EK
bool "Atmel AT91SAM9G10-EK Evaluation Kit"
select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
endif
# ----------------------------------------------------------
if ARCH_AT91SAM9263
comment "AT91SAM9263 Board Type"
config MACH_AT91SAM9263EK
bool "Atmel AT91SAM9263-EK Evaluation Kit"
select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
config MACH_USB_A9263
bool "CALAO USB-A9263"
help
Select this if you are using a Calao Systems USB-A9263.
<http://www.calao-systems.com>
config MACH_NEOCORE926
bool "Adeneo NEOCORE926"
select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using the Adeneo Neocore 926 board.
endif
# ----------------------------------------------------------
if ARCH_AT91SAM9RL
comment "AT91SAM9RL Board Type"
config MACH_AT91SAM9RLEK
bool "Atmel AT91SAM9RL-EK Evaluation Kit"
help
Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
endif
# ----------------------------------------------------------
if ARCH_AT91SAM9G20
comment "AT91SAM9G20 Board Type"
config MACH_AT91SAM9G20EK
bool "Atmel AT91SAM9G20-EK Evaluation Kit"
select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
that embeds only one SD/MMC slot.
config MACH_AT91SAM9G20EK_2MMC
depends on MACH_AT91SAM9G20EK
bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
help
Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
onwards.
<http://www.atmel.com/tools/SAM9G20-EK.aspx>
config MACH_CPU9G20
bool "Eukrea CPU9G20 board"
help
Select this if you are using a Eukrea Electromatique's
CPU9G20 Board <http://www.eukrea.com/>
config MACH_ACMENETUSFOXG20
bool "Acme Systems srl FOX Board G20"
help
Select this if you are using Acme Systems
FOX Board G20 <http://www.acmesystems.it>
config MACH_PORTUXG20
bool "taskit PortuxG20"
help
Select this if you are using taskit's PortuxG20.
<http://www.taskit.de/en/>
config MACH_STAMP9G20
bool "taskit Stamp9G20 CPU module"
help
Select this if you are using taskit's Stamp9G20 CPU module on its
evaluation board.
<http://www.taskit.de/en/>
config MACH_PCONTROL_G20
bool "PControl G20 CPU module"
help
Select this if you are using taskit's Stamp9G20 CPU module on this
carrier board, beeing the decentralized unit of a building automation
system; featuring nvram, eth-switch, iso-rs485, display, io
config MACH_GSIA18S
bool "GS_IA18_S board"
help
This enables support for the GS_IA18_S board
produced by GeoSIG Ltd company. This is an internet accelerograph.
<http://www.geosig.com>
config MACH_USB_A9G20
bool "CALAO USB-A9G20"
depends on ARCH_AT91SAM9G20
help
Select this if you are using a Calao Systems USB-A9G20.
<http://www.calao-systems.com>
endif
if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
comment "AT91SAM9260/AT91SAM9G20 boards"
config MACH_SNAPPER_9260
bool "Bluewater Systems Snapper 9260/9G20 module"
help
Select this if you are using the Bluewater Systems Snapper 9260 or
Snapper 9G20 modules.
<http://www.bluewatersys.com/>
endif
# ----------------------------------------------------------
if ARCH_AT91SAM9G45
comment "AT91SAM9G45 Board Type"
config MACH_AT91SAM9M10G45EK
bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
help
Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit.
Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10
families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
<http://www.atmel.com/tools/SAM9M10-G45-EK.aspx>
endif
# ----------------------------------------------------------
if ARCH_AT91X40
comment "AT91X40 Board Type"
config MACH_AT91EB01
bool "Atmel AT91EB01 Evaluation Kit"
help
Select this if you are using Atmel's AT91EB01 Evaluation Kit.
It is also a popular target for simulators such as GDB's
ARM simulator (commonly known as the ARMulator) and the
Skyeye simulator.
endif
# ----------------------------------------------------------
comment "Generic Board Type"
config MACH_AT91SAM_DT
bool "Atmel AT91SAM Evaluation Kits with device-tree support"
select USE_OF
help
Select this if you want to experiment device-tree with
an Atmel Evaluation Kit.
# ----------------------------------------------------------
comment "AT91 Board Options"
config MTD_AT91_DATAFLASH_CARD
bool "Enable DataFlash Card support"
depends on HAVE_AT91_DATAFLASH_CARD
help
Enable support for the DataFlash card.
# ----------------------------------------------------------
comment "AT91 Feature Selections"
config AT91_PROGRAMMABLE_CLOCKS
bool "Programmable Clocks"
help
Select this if you need to program one or more of the PCK0..PCK3
programmable clock outputs.
config AT91_SLOW_CLOCK
bool "Suspend-to-RAM disables main oscillator"
depends on SUSPEND
help
Select this if you want Suspend-to-RAM to save the most power
possible (without powering off the CPU) by disabling the PLLs
and main oscillator so that only the 32 KiHz clock is available.
When only that slow-clock is available, some peripherals lose
functionality. Many can't issue wakeup events unless faster
clocks are available. Some lose their operating state and
need to be completely re-initialized.
config AT91_TIMER_HZ
int "Kernel HZ (jiffies per second)"
range 32 1024
depends on ARCH_AT91
default "128" if ARCH_AT91RM9200
default "100"
help
On AT91rm9200 chips where you're using a system clock derived
from the 32768 Hz hardware clock, this tick rate should divide
it exactly: use a power-of-two value, such as 128 or 256, to
reduce timing errors caused by rounding.
On AT91sam926x chips, or otherwise when using a higher precision
system clock (of at least several MHz), rounding is less of a
problem so it can be safer to use a decimal values like 100.
endmenu
endif
