/*
* linux/arch/arm/kernel/head.S
*
* Copyright (C) 1994-2002 Russell King
* Copyright (c) 2003 ARM Limited
* All Rights Reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Kernel startup code for all 32-bit CPUs
*/
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/domain.h>
#include <asm/procinfo.h>
#include <asm/ptrace.h>
#include <asm/asm-offsets.h>
#include <asm/memory.h>
#include <asm/thread_info.h>
#include <asm/system.h>
#define KERNEL_RAM_ADDR (PAGE_OFFSET + TEXT_OFFSET)
/*
* swapper_pg_dir is the virtual address of the initial page table.
* We place the page tables 16K below KERNEL_RAM_ADDR. Therefore, we must
* make sure that KERNEL_RAM_ADDR is correctly set. Currently, we expect
* the least significant 16 bits to be 0x8000, but we could probably
* relax this restriction to KERNEL_RAM_ADDR >= PAGE_OFFSET + 0x4000.
*/
#if (KERNEL_RAM_ADDR & 0xffff) != 0x8000
#error KERNEL_RAM_ADDR must start at 0xXXXX8000
#endif
.globl swapper_pg_dir
.equ swapper_pg_dir, KERNEL_RAM_ADDR - 0x4000
.macro pgtbl, rd
ldr \rd, =(__virt_to_phys(KERNEL_RAM_ADDR - 0x4000))
.endm
#ifdef CONFIG_XIP_KERNEL
#define TEXTADDR XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
#else
#define TEXTADDR KERNEL_RAM_ADDR
#endif
/*
* Kernel startup entry point.
* ---------------------------
*
* This is normally called from the decompressor code. The requirements
* are: MMU = off, D-cache = off, I-cache = dont care, r0 = 0,
* r1 = machine nr.
*
* This code is mostly position independent, so if you link the kernel at
* 0xc0008000, you call this at __pa(0xc0008000).
*
* See linux/arch/arm/tools/mach-types for the complete list of machine
* numbers for r1.
*
* We're trying to keep crap to a minimum; DO NOT add any machine specific
* crap here - that's what the boot loader (or in extreme, well justified
* circumstances, zImage) is for.
*/
__INIT
.type stext, %function
ENTRY(stext)
msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE @ ensure svc mode
@ and irqs disabled
mrc p15, 0, r9, c0, c0 @ get processor id
bl __lookup_processor_type @ r5=procinfo r9=cpuid
movs r10, r5 @ invalid processor (r5=0)?
beq __error_p @ yes, error 'p'
bl __lookup_machine_type @ r5=machinfo
movs r8, r5 @ invalid machine (r5=0)?
beq __error_a @ yes, error 'a'
bl __create_page_tables
/*
* The following calls CPU specific code in a position independent
* manner. See arch/arm/mm/proc-*.S for details. r10 = base of
* xxx_proc_info structure selected by __lookup_machine_type
* above. On return, the CPU will be ready for the MMU to be
* turned on, and r0 will hold the CPU control register value.
*/
ldr r13, __switch_data @ address to jump to after
@ mmu has been enabled
adr lr, __enable_mmu @ return (PIC) address
add pc, r10, #PROCINFO_INITFUNC
#if defined(CONFIG_SMP)
.type secondary_startup, #function
ENTRY(secondary_startup)
/*
* Common entry point for secondary CPUs.
*
* Ensure that we're in SVC mode, and IRQs are disabled. Lookup
* the processor type - there is no need to check the machine type
* as it has already been validated by the primary processor.
*/
msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
mrc p15, 0, r9, c0, c0 @ get processor id
bl __lookup_processor_type
movs r10, r5 @ invalid processor?
moveq r0, #'p' @ yes, error 'p'
beq __error
/*
* Use the page tables supplied from __cpu_up.
*/
adr r4, __secondary_data
ldmia r4, {r5, r7, r13} @ address to jump to after
sub r4, r4, r5 @ mmu has been enabled
ldr r4, [r7, r4] @ get secondary_data.pgdir
adr lr, __enable_mmu @ return address
add pc, r10, #PROCINFO_INITFUNC @ initialise processor
@ (return control reg)
/*
* r6 = &secondary_data
*/
ENTRY(__secondary_switched)
ldr sp, [r7, #4] @ get secondary_data.stack
mov fp, #0
b secondary_start_kernel
.type __secondary_data, %object
__secondary_data:
.long .
.long secondary_data
.long __secondary_switched
#endif /* defined(CONFIG_SMP) */
/*
* Setup common bits before finally enabling the MMU. Essentially
* this is just loading the page table pointer and domain access
* registers.
*/
.type __enable_mmu, %function
__enable_mmu:
#ifdef CONFIG_ALIGNMENT_TRAP
orr r0, r0, #CR_A
#else
bic r0, r0, #CR_A
#endif
#ifdef CONFIG_CPU_DCACHE_DISABLE
bic r0, r0, #CR_C
#endif
#ifdef CONFIG_CPU_BPREDICT_DISABLE
bic r0, r0, #CR_Z
#endif
#ifdef CONFIG_CPU_ICACHE_DISABLE
bic r0, r0, #CR_I
#endif
mov r5, #(domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \
domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \
domain_val(DOMAIN_TABLE, DOMAIN_MANAGER) | \
domain_val(DOMAIN_IO, DOMAIN_CLIENT))
mcr p15, 0, r5, c3, c0, 0 @ load domain access register
mcr p15, 0, r4, c2, c0, 0 @ load page table pointer
b __turn_mmu_on
/*
* Enable the MMU. This completely changes the structure of the visible
* memory space. You will not be able to trace execution through this.
* If you have an enquiry about this, *please* check the linux-arm-kernel
* mailing list archives BEFORE sending another post to the list.
*
* r0 = cp#15 control register
* r13 = *virtual* address to jump to upon completion
*
* other registers depend on the function called upon completion
*/
.align 5
.type __turn_mmu_on, %function
__turn_mmu_on:
mov r0, r0
mcr p15, 0, r0, c1, c0, 0 @ write control reg
mrc p15, 0, r3, c0, c0, 0 @ read id reg
mov r3, r3
mov r3, r3
mov pc, r13
/*
* Setup the initial page tables. We only setup the barest
* amount which are required to get the kernel running, which
* generally means mapping in the kernel code.
*
* r8 = machinfo
* r9 = cpuid
* r10 = procinfo
*
* Returns:
* r0, r3, r6, r7 corrupted
* r4 = physical page table address
*/
.type __create_page_tables, %function
__create_page_tables:
pgtbl r4 @ page table address
/*
* Clear the 16K level 1 swapper page table
*/
mov r0, r4
mov r3, #0
add r6, r0, #0x4000
1: str r3, [r0], #4
str r3, [r0], #4
str r3, [r0], #4
str r3, [r0], #4
teq r0, r6
bne 1b
ldr r7, [r10, #PROCINFO_MM_MMUFLAGS] @ mm_mmuflags
/*
* Create identity mapping for first MB of kernel to
* cater for the MMU enable. This identity mapping
* will be removed by paging_init(). We use our current program
* counter to determine corresponding section base address.
*/
mov r6, pc, lsr #20 @ start of kernel section
orr r3, r7, r6, lsl #20 @ flags + kernel base
str r3, [r4, r6, lsl #2] @ identity mapping
/*
* Now setup the pagetables for our kernel direct
* mapped region. We round TEXTADDR down to the
* nearest megabyte boundary. It is assumed that
* the kernel fits within 4 contigous 1MB sections.
*/
add r0, r4, #(TEXTADDR & 0xff000000) >> 18 @ start of kernel
str r3, [r0, #(TEXTADDR & 0x00f00000) >> 18]!
add r3, r3, #1 << 20
str r3, [r0, #4]! @ KERNEL + 1MB
add r3, r3, #1 << 20
str r3, [r0, #4]! @ KERNEL + 2MB
add r3, r3, #1 << 20
str r3, [r0, #4] @ KERNEL + 3MB
/*
* Then map first 1MB of ram in case it contains our boot params.
*/
add r0, r4, #PAGE_OFFSET >> 18
orr r6, r7, #PHYS_OFFSET
str r6, [r0]
#ifdef CONFIG_XIP_KERNEL
/*
* Map some ram to cover our .data and .bss areas.
* Mapping 3MB should be plenty.
*/
sub r3, r4, #PHYS_OFFSET
mov r3, r3, lsr #20
add r0, r0, r3, lsl #2
add r6, r6, r3, lsl #20
str r6, [r0], #4
add r6, r6, #(1 << 20)
str r6, [r0], #4
add r6, r6, #(1 << 20)
str r6, [r0]
#endif
#ifdef CONFIG_DEBUG_LL
ldr r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
/*
* Map in IO space for serial debugging.
* This allows debug messages to be output
* via a serial console before paging_init.
*/
ldr r3, [r8, #MACHINFO_PGOFFIO]
add r0, r4, r3
rsb r3, r3, #0x4000 @ PTRS_PER_PGD*sizeof(long)
cmp r3, #0x0800 @ limit to 512MB
movhi r3, #0x0800
add r6, r0, r3
ldr r3, [r8, #MACHINFO_PHYSIO]
orr r3, r3, r7
1: str r3, [r0], #4
add r3, r3, #1 << 20
teq r0, r6
bne 1b
#if defined(CONFIG_ARCH_NETWINDER) || defined(CONFIG_ARCH_CATS)
/*
* If we're using the NetWinder or CATS, we also need to map
* in the 16550-type serial port for the debug messages
*/
add r0, r4, #0xff000000 >> 18
orr r3, r7, #0x7c000000
str r3, [r0]
#endif
#ifdef CONFIG_ARCH_RPC
/*
* Map in screen at 0x02000000 & SCREEN2_BASE
* Similar reasons here - for debug. This is
* only for Acorn RiscPC architectures.
*/
add r0, r4, #0x02000000 >> 18
orr r3, r7, #0x02000000
str r3, [r0]
add r0, r4, #0xd8000000 >> 18
str r3, [r0]
#endif
#endif
mov pc, lr
.ltorg
#include "head-common.S"
