// SPDX-License-Identifier: BSD-3-Clause
/*
* SDX65 SoC device tree source
*
* Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
*
*/
#include <dt-bindings/clock/qcom,gcc-sdx65.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
qcom,msm-id = <458 0x10000>, <483 0x10000>, <509 0x10000>;
interrupt-parent = <&intc>;
memory {
device_type = "memory";
reg = <0 0>;
};
clocks {
xo_board: xo-board {
compatible = "fixed-clock";
clock-frequency = <76800000>;
clock-output-names = "xo_board";
#clock-cells = <0>;
};
sleep_clk: sleep-clk {
compatible = "fixed-clock";
clock-frequency = <32764>;
clock-output-names = "sleep_clk";
#clock-cells = <0>;
};
nand_clk_dummy: nand-clk-dummy {
compatible = "fixed-clock";
clock-frequency = <32764>;
#clock-cells = <0>;
};
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x0>;
enable-method = "psci";
clocks = <&apcs>;
power-domains = <&rpmhpd SDX65_CX_AO>;
power-domain-names = "rpmhpd";
operating-points-v2 = <&cpu_opp_table>;
};
};
cpu_opp_table: cpu-opp-table {
compatible = "operating-points-v2";
opp-shared;
opp-345600000 {
opp-hz = /bits/ 64 <345600000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-576000000 {
opp-hz = /bits/ 64 <576000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-1094400000 {
opp-hz = /bits/ 64 <1094400000>;
required-opps = <&rpmhpd_opp_nom>;
};
opp-1497600000 {
opp-hz = /bits/ 64 <1497600000>;
required-opps = <&rpmhpd_opp_turbo>;
};
};
firmware {
scm {
compatible = "qcom,scm-sdx65", "qcom,scm";
};
};
mc_virt: interconnect-mc-virt {
compatible = "qcom,sdx65-mc-virt";
#interconnect-cells = <1>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
psci {
compatible = "arm,psci-1.0";
method = "smc";
};
reserved_memory: reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
tz_heap_mem: memory@8fcad000 {
no-map;
reg = <0x8fcad000 0x40000>;
};
secdata_mem: memory@8fcfd000 {
no-map;
reg = <0x8fcfd000 0x1000>;
};
hyp_mem: memory@8fd00000 {
no-map;
reg = <0x8fd00000 0x80000>;
};
access_control_mem: memory@8fd80000 {
no-map;
reg = <0x8fd80000 0x80000>;
};
aop_mem: memory@8fe00000 {
no-map;
reg = <0x8fe00000 0x20000>;
};
smem_mem: memory@8fe20000 {
compatible = "qcom,smem";
reg = <0x8fe20000 0xc0000>;
hwlocks = <&tcsr_mutex 3>;
no-map;
};
cmd_db: reserved-memory@8fee0000 {
compatible = "qcom,cmd-db";
reg = <0x8fee0000 0x20000>;
no-map;
};
tz_mem: memory@8ff00000 {
no-map;
reg = <0x8ff00000 0x100000>;
};
tz_apps_mem: memory@90000000 {
no-map;
reg = <0x90000000 0x500000>;
};
llcc_tcm_mem: memory@15800000 {
no-map;
reg = <0x15800000 0x800000>;
};
};
smp2p-mpss {
compatible = "qcom,smp2p";
qcom,smem = <435>, <428>;
interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
mboxes = <&apcs 14>;
qcom,local-pid = <0>;
qcom,remote-pid = <1>;
modem_smp2p_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
modem_smp2p_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
#interrupt-cells = <2>;
};
ipa_smp2p_out: ipa-ap-to-modem {
qcom,entry-name = "ipa";
#qcom,smem-state-cells = <1>;
};
ipa_smp2p_in: ipa-modem-to-ap {
qcom,entry-name = "ipa";
interrupt-controller;
#interrupt-cells = <2>;
};
};
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
ranges;
compatible = "simple-bus";
gcc: clock-controller@100000 {
compatible = "qcom,gcc-sdx65";
reg = <0x00100000 0x001f7400>;
clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>;
clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
#power-domain-cells = <1>;
#clock-cells = <1>;
#reset-cells = <1>;
};
blsp1_uart3: serial@831000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x00831000 0x200>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
status = "disabled";
};
usb_hsphy: phy@ff4000 {
compatible = "qcom,usb-snps-hs-7nm-phy";
reg = <0xff4000 0x120>;
#phy-cells = <0>;
status = "disabled";
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "ref";
resets = <&gcc GCC_QUSB2PHY_BCR>;
};
usb_qmpphy: phy@ff6000 {
compatible = "qcom,sdx65-qmp-usb3-uni-phy";
reg = <0x00ff6000 0x1c8>;
status = "disabled";
#address-cells = <1>;
#size-cells = <1>;
ranges;
clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
<&gcc GCC_USB3_PRIM_CLKREF_EN>;
clock-names = "aux", "cfg_ahb", "ref";
resets = <&gcc GCC_USB3PHY_PHY_BCR>,
<&gcc GCC_USB3_PHY_BCR>;
reset-names = "phy", "common";
usb_ssphy: phy@ff6200 {
reg = <0x00ff6e00 0x160>,
<0x00ff7000 0x1ec>,
<0x00ff6200 0x1e00>;
#phy-cells = <0>;
#clock-cells = <0>;
clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
clock-names = "pipe0";
clock-output-names = "usb3_uni_phy_pipe_clk_src";
};
};
system_noc: interconnect@1620000 {
compatible = "qcom,sdx65-system-noc";
reg = <0x01620000 0x31200>;
#interconnect-cells = <1>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
qpic_bam: dma-controller@1b04000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x01b04000 0x1c000>;
interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rpmhcc RPMH_QPIC_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <0>;
qcom,controlled-remotely;
status = "disabled";
};
qpic_nand: nand-controller@1b30000 {
compatible = "qcom,sdx55-nand";
reg = <0x01b30000 0x10000>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&rpmhcc RPMH_QPIC_CLK>,
<&nand_clk_dummy>;
clock-names = "core", "aon";
dmas = <&qpic_bam 0>,
<&qpic_bam 1>,
<&qpic_bam 2>;
dma-names = "tx", "rx", "cmd";
status = "disabled";
};
tcsr_mutex: hwlock@1f40000 {
compatible = "qcom,tcsr-mutex";
reg = <0x01f40000 0x40000>;
#hwlock-cells = <1>;
};
remoteproc_mpss: remoteproc@4080000 {
compatible = "qcom,sdx55-mpss-pas";
reg = <0x04080000 0x4040>;
interrupts-extended = <&intc GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready", "handover",
"stop-ack", "shutdown-ack";
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";
power-domains = <&rpmhpd SDX65_CX>,
<&rpmhpd SDX65_MSS>;
power-domain-names = "cx", "mss";
qcom,smem-states = <&modem_smp2p_out 0>;
qcom,smem-state-names = "stop";
status = "disabled";
glink-edge {
interrupts = <GIC_SPI 114 IRQ_TYPE_EDGE_RISING>;
label = "mpss";
qcom,remote-pid = <1>;
mboxes = <&apcs 15>;
};
};
sdhc_1: mmc@8804000 {
compatible = "qcom,sdx65-sdhci", "qcom,sdhci-msm-v5";
reg = <0x08804000 0x1000>;
reg-names = "hc";
interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC1_APPS_CLK>,
<&gcc GCC_SDCC1_AHB_CLK>;
clock-names = "core", "iface";
status = "disabled";
};
mem_noc: interconnect@9680000 {
compatible = "qcom,sdx65-mem-noc";
reg = <0x09680000 0x27200>;
#interconnect-cells = <1>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
usb: usb@a6f8800 {
compatible = "qcom,sdx65-dwc3", "qcom,dwc3";
reg = <0x0a6f8800 0x400>;
status = "disabled";
#address-cells = <1>;
#size-cells = <1>;
ranges;
clocks = <&gcc GCC_USB30_SLV_AHB_CLK>,
<&gcc GCC_USB30_MASTER_CLK>,
<&gcc GCC_USB30_MSTR_AXI_CLK>,
<&gcc GCC_USB30_MOCK_UTMI_CLK>,
<&gcc GCC_USB30_SLEEP_CLK>;
clock-names = "cfg_noc", "core", "iface", "mock_utmi",
"sleep";
assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
<&gcc GCC_USB30_MASTER_CLK>;
assigned-clock-rates = <19200000>, <200000000>;
interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 76 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 18 IRQ_TYPE_EDGE_BOTH>,
<&pdc 19 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "hs_phy_irq",
"ss_phy_irq",
"dm_hs_phy_irq",
"dp_hs_phy_irq";
power-domains = <&gcc USB30_GDSC>;
resets = <&gcc GCC_USB30_BCR>;
usb_dwc3: usb@a600000 {
compatible = "snps,dwc3";
reg = <0x0a600000 0xcd00>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&apps_smmu 0x1a0 0x0>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
phys = <&usb_hsphy>, <&usb_ssphy>;
phy-names = "usb2-phy", "usb3-phy";
};
};
restart@c264000 {
compatible = "qcom,pshold";
reg = <0x0c264000 0x1000>;
};
spmi_bus: qcom,spmi@c440000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0xc440000 0xd00>,
<0xc600000 0x2000000>,
<0xe600000 0x100000>,
<0xe700000 0xa0000>,
<0xc40a000 0x26000>;
reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "periph_irq";
interrupt-controller;
#interrupt-cells = <4>;
#address-cells = <2>;
#size-cells = <0>;
cell-index = <0>;
qcom,channel = <0>;
qcom,ee = <0>;
};
tlmm: pinctrl@f100000 {
compatible = "qcom,sdx65-tlmm";
reg = <0xf100000 0x300000>;
interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&tlmm 0 0 109>;
interrupt-controller;
interrupt-parent = <&intc>;
#interrupt-cells = <2>;
};
pdc: interrupt-controller@b210000 {
compatible = "qcom,sdx65-pdc", "qcom,pdc";
reg = <0xb210000 0x10000>;
qcom,pdc-ranges = <0 147 52>, <52 266 32>;
#interrupt-cells = <2>;
interrupt-parent = <&intc>;
interrupt-controller;
};
sram@1468f000 {
compatible = "qcom,sdx65-imem", "syscon", "simple-mfd";
reg = <0x1468f000 0x1000>;
ranges = <0x0 0x1468f000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
pil-reloc@94c {
compatible = "qcom,pil-reloc-info";
reg = <0x94c 0xc8>;
};
};
apps_smmu: iommu@15000000 {
compatible = "qcom,sdx65-smmu-500", "arm,mmu-500";
reg = <0x15000000 0x40000>;
#iommu-cells = <2>;
#global-interrupts = <1>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
};
intc: interrupt-controller@17800000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
interrupt-parent = <&intc>;
#interrupt-cells = <3>;
reg = <0x17800000 0x1000>,
<0x17802000 0x1000>;
};
a7pll: clock@17808000 {
compatible = "qcom,sdx55-a7pll";
reg = <0x17808000 0x1000>;
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "bi_tcxo";
#clock-cells = <0>;
};
apcs: mailbox@17810000 {
compatible = "qcom,sdx55-apcs-gcc", "syscon";
reg = <0x17810000 0x2000>;
#mbox-cells = <1>;
clocks = <&rpmhcc RPMH_CXO_CLK>, <&a7pll>, <&gcc GPLL0>;
clock-names = "ref", "pll", "aux";
#clock-cells = <0>;
};
watchdog@17817000 {
compatible = "qcom,apss-wdt-sdx65", "qcom,kpss-wdt";
reg = <0x17817000 0x1000>;
clocks = <&sleep_clk>;
};
timer@17820000 {
#address-cells = <1>;
#size-cells = <1>;
ranges;
compatible = "arm,armv7-timer-mem";
reg = <0x17820000 0x1000>;
clock-frequency = <19200000>;
frame@17821000 {
frame-number = <0>;
interrupts = <GIC_SPI 7 0x4>,
<GIC_SPI 6 0x4>;
reg = <0x17821000 0x1000>,
<0x17822000 0x1000>;
};
frame@17823000 {
frame-number = <1>;
interrupts = <GIC_SPI 8 0x4>;
reg = <0x17823000 0x1000>;
status = "disabled";
};
frame@17824000 {
frame-number = <2>;
interrupts = <GIC_SPI 9 0x4>;
reg = <0x17824000 0x1000>;
status = "disabled";
};
frame@17825000 {
frame-number = <3>;
interrupts = <GIC_SPI 10 0x4>;
reg = <0x17825000 0x1000>;
status = "disabled";
};
frame@17826000 {
frame-number = <4>;
interrupts = <GIC_SPI 11 0x4>;
reg = <0x17826000 0x1000>;
status = "disabled";
};
frame@17827000 {
frame-number = <5>;
interrupts = <GIC_SPI 12 0x4>;
reg = <0x17827000 0x1000>;
status = "disabled";
};
frame@17828000 {
frame-number = <6>;
interrupts = <GIC_SPI 13 0x4>;
reg = <0x17828000 0x1000>;
status = "disabled";
};
frame@17829000 {
frame-number = <7>;
interrupts = <GIC_SPI 14 0x4>;
reg = <0x17829000 0x1000>;
status = "disabled";
};
};
apps_rsc: rsc@17830000 {
label = "apps_rsc";
compatible = "qcom,rpmh-rsc";
reg = <0x17830000 0x10000>,
<0x17840000 0x10000>;
reg-names = "drv-0", "drv-1";
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
qcom,tcs-offset = <0xd00>;
qcom,drv-id = <1>;
qcom,tcs-config = <ACTIVE_TCS 2>,
<SLEEP_TCS 2>,
<WAKE_TCS 2>,
<CONTROL_TCS 1>;
rpmhcc: clock-controller {
compatible = "qcom,sdx65-rpmh-clk";
#clock-cells = <1>;
clock-names = "xo";
clocks = <&xo_board>;
};
rpmhpd: power-controller {
compatible = "qcom,sdx65-rpmhpd";
#power-domain-cells = <1>;
operating-points-v2 = <&rpmhpd_opp_table>;
rpmhpd_opp_table: opp-table {
compatible = "operating-points-v2";
rpmhpd_opp_ret: opp1 {
opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
};
rpmhpd_opp_min_svs: opp2 {
opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
};
rpmhpd_opp_low_svs: opp3 {
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
};
rpmhpd_opp_svs: opp4 {
opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
};
rpmhpd_opp_svs_l1: opp5 {
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
};
rpmhpd_opp_nom: opp6 {
opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
};
rpmhpd_opp_nom_l1: opp7 {
opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
};
rpmhpd_opp_nom_l2: opp8 {
opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
};
rpmhpd_opp_turbo: opp9 {
opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
};
rpmhpd_opp_turbo_l1: opp10 {
opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
};
};
};
apps_bcm_voter: bcm-voter {
compatible = "qcom,bcm-voter";
};
};
};
timer {
compatible = "arm,armv7-timer";
interrupts = <1 13 0xf08>,
<1 12 0xf08>,
<1 10 0xf08>,
<1 11 0xf08>;
clock-frequency = <19200000>;
};
};
