/*
* Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include "berlin2q.dtsi"
/ {
model = "Marvell BG2-Q DMP";
compatible = "marvell,berlin2q-dmp", "marvell,berlin2q", "marvell,berlin";
memory@0 {
device_type = "memory";
reg = <0x00000000 0x80000000>;
};
chosen {
bootargs = "earlyprintk";
stdout-path = "serial0:115200n8";
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_usb0_vbus: regulator_usb0 {
compatible = "regulator-fixed";
regulator-name = "usb0_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&portb 8 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usb1_vbus: regulator_usb1 {
compatible = "regulator-fixed";
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&portb 10 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usb2_vbus: regulator_usb2 {
compatible = "regulator-fixed";
regulator-name = "usb2_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&portb 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_sdio1_vmmc: regulator_sdio1_vmmc {
compatible = "regulator-fixed";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "sdio1_vmmc";
enable-active-high;
regulator-boot-on;
gpio = <&portb 21 GPIO_ACTIVE_HIGH>;
};
reg_sdio1_vqmmc: regulator_sido1_vqmmc {
compatible = "regulator-gpio";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "sdio1_vqmmc";
regulator-type = "voltage";
enable-active-high;
gpios = <&portb 16 GPIO_ACTIVE_HIGH>;
states = <3300000 0x1
1800000 0x0>;
};
};
};
&soc_pinctrl {
sd1gpio_pmux: sd1pwr-pmux {
groups = "G23", "G32";
function = "gpio";
};
};
&sdhci1 {
vmmc-supply = <®_sdio1_vmmc>;
vqmmc-supply = <®_sdio1_vqmmc>;
cd-gpios = <&portc 30 GPIO_ACTIVE_LOW>;
wp-gpios = <&portd 0 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&sd1gpio_pmux>, <&sd1_pmux>;
pinctrl-names = "default";
status = "okay";
};
&sdhci2 {
bus-width = <8>;
non-removable;
status = "okay";
};
&i2c0 {
status = "okay";
};
&i2c2 {
status = "okay";
};
&uart0 {
status = "okay";
};
&usb_phy0 {
status = "okay";
};
&usb_phy2 {
status = "okay";
};
&usb0 {
vbus-supply = <®_usb0_vbus>;
status = "okay";
};
&usb2 {
vbus-supply = <®_usb2_vbus>;
status = "okay";
};
ð0 {
status = "okay";
};
&sata0 {
status = "okay";
};
&sata_phy {
status = "okay";
};
