/*
* Device Tree file for Marvell Armada 395 GP board
*
* Copyright (C) 2016 Marvell
*
* Grzegorz Jaszczyk <jaz@semihalf.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without
* any warranty of any kind, whether express or implied.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "armada-395.dtsi"
/ {
model = "Marvell Armada 395 GP Board";
compatible = "marvell,a395-gp", "marvell,armada395",
"marvell,armada390";
chosen {
stdout-path = "serial0:115200n8";
};
memory {
device_type = "memory";
reg = <0x00000000 0x40000000>; /* 1 GB */
};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
internal-regs {
i2c@11000 {
status = "okay";
clock-frequency = <100000>;
eeprom@57 {
compatible = "atmel,24c64";
reg = <0x57>;
};
};
serial@12000 {
/*
* Exported on the micro USB connector CON17
* through an FTDI
*/
status = "okay";
};
/* CON1 */
usb@58000 {
status = "okay";
};
/* CON2 */
sata@a8000 {
status = "okay";
};
flash@d0000 {
status = "okay";
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
num-cs = <1>;
marvell,nand-keep-config;
marvell,nand-enable-arbiter;
nand-on-flash-bbt;
nand-ecc-strength = <4>;
nand-ecc-step-size = <512>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "U-Boot";
reg = <0x00000000 0x00600000>;
read-only;
};
partition@800000 {
label = "uImage";
reg = <0x00600000 0x00400000>;
read-only;
};
partition@1000000 {
label = "Root";
reg = <0x00a00000 0x3f600000>;
};
};
};
/* CON18 */
sdhci@d8000 {
clock-frequency = <200000000>;
broken-cd;
wp-inverted;
bus-width = <8>;
status = "okay";
no-1-8-v;
};
/* CON4 */
usb3@f0000 {
status = "okay";
};
};
pcie {
status = "okay";
/*
* The two PCIe units are accessible through
* mini PCIe slot on the board.
*/
/* CON7 */
pcie@2,0 {
/* Port 1, Lane 0 */
status = "okay";
};
/* CON8 */
pcie@4,0 {
/* Port 3, Lane 0 */
status = "okay";
};
};
};
};
